From 7ce1e7820451319227b2c1120a2b5e4a63ebf0a9 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 13 Mar 2026 18:11:59 +0700 Subject: actual build make/cmake for ft9xx --- docs/reference/boards.rst | 2 +- docs/reference/dependencies.rst | 2 +- .../device/audio_4_channel_mic_freertos/skip.txt | 1 + examples/device/audio_test_freertos/skip.txt | 1 + examples/device/cdc_msc_freertos/skip.txt | 1 + examples/device/hid_composite_freertos/skip.txt | 1 + examples/device/midi_test_freertos/skip.txt | 1 + examples/host/cdc_msc_hid_freertos/skip.txt | 1 + hw/bsp/brtmm90x/boards/mm900evxb/board.h | 87 ------- hw/bsp/brtmm90x/family.c | 260 --------------------- hw/bsp/brtmm90x/family.mk | 66 ------ hw/bsp/family_support.cmake | 15 ++ hw/bsp/ft9xx/boards/mm900evxb/board.cmake | 5 + hw/bsp/ft9xx/boards/mm900evxb/board.h | 87 +++++++ hw/bsp/ft9xx/boards/mm900evxb/board.mk | 1 + hw/bsp/ft9xx/family.c | 260 +++++++++++++++++++++ hw/bsp/ft9xx/family.cmake | 74 ++++++ hw/bsp/ft9xx/family.mk | 75 ++++++ tools/get_deps.py | 4 +- 19 files changed, 527 insertions(+), 417 deletions(-) delete mode 100644 hw/bsp/brtmm90x/boards/mm900evxb/board.h delete mode 100644 hw/bsp/brtmm90x/family.c delete mode 100644 hw/bsp/brtmm90x/family.mk create mode 100644 hw/bsp/ft9xx/boards/mm900evxb/board.cmake create mode 100644 hw/bsp/ft9xx/boards/mm900evxb/board.h create mode 100644 hw/bsp/ft9xx/boards/mm900evxb/board.mk create mode 100644 hw/bsp/ft9xx/family.c create mode 100644 hw/bsp/ft9xx/family.cmake create mode 100644 hw/bsp/ft9xx/family.mk diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index eaef078d3..e01ea9d23 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -55,7 +55,7 @@ Bridgetek ========= ========= ======== ===================================== ====== Board Name Family URL Note ========= ========= ======== ===================================== ====== -mm900evxb MM900EVxB brtmm90x https://brtchip.com/product/mm900ev1b +mm900evxb MM900EVxB ft9xx https://brtchip.com/product/mm900ev1b ========= ========= ======== ===================================== ====== Espressif diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index 9b61e10a8..16a43f479 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -17,7 +17,7 @@ hw/mcu/artery/at32f423 https://github.com/ArteryTek/AT32F423_ hw/mcu/artery/at32f425 https://github.com/ArteryTek/AT32F425_Firmware_Library.git 620233e1357d5c1b7e2bde6b9dd5196822b91817 at32f425 hw/mcu/artery/at32f435_437 https://github.com/ArteryTek/AT32F435_437_Firmware_Library.git 25439cc6650a8ae0345934e8707a5f38c7ae41f8 at32f435_437 hw/mcu/artery/at32f45x https://github.com/ArteryTek/AT32F45x_Firmware_Library.git 3d4a1b38be8ebac292e2350ca53bc4bfa4430233 at32f45x -hw/mcu/bridgetek/ft9xx/ft90x-sdk https://github.com/BRTSG-FOSS/ft90x-sdk.git 91060164afe239fcb394122e8bf9eb24d3194eb1 brtmm90x +hw/mcu/bridgetek/ft9xx/ft90x-sdk https://github.com/BRTSG-FOSS/ft90x-sdk.git 91060164afe239fcb394122e8bf9eb24d3194eb1 ft9xx hw/mcu/broadcom https://github.com/adafruit/broadcom-peripherals.git 08370086080759ed54ac1136d62d2ad24c6fa267 broadcom_32bit broadcom_64bit hw/mcu/gd/nuclei-sdk https://github.com/Nuclei-Software/nuclei-sdk.git 7eb7bfa9ea4fbeacfafe1d5f77d5a0e6ed3922e7 gd32vf103 hw/mcu/infineon/mtb-xmclib-cat3 https://github.com/Infineon/mtb-xmclib-cat3.git daf5500d03cba23e68c2f241c30af79cd9d63880 xmc4000 diff --git a/examples/device/audio_4_channel_mic_freertos/skip.txt b/examples/device/audio_4_channel_mic_freertos/skip.txt index ded5ee4bc..be44cb2c0 100644 --- a/examples/device/audio_4_channel_mic_freertos/skip.txt +++ b/examples/device/audio_4_channel_mic_freertos/skip.txt @@ -8,6 +8,7 @@ mcu:GD32VF103 mcu:MCXA15 mcu:MKL25ZXX mcu:MSP430x5xx +mcu:FT90X mcu:RP2040 mcu:SAMD11 mcu:VALENTYUSB_EPTRI diff --git a/examples/device/audio_test_freertos/skip.txt b/examples/device/audio_test_freertos/skip.txt index be1912a31..007fece53 100644 --- a/examples/device/audio_test_freertos/skip.txt +++ b/examples/device/audio_test_freertos/skip.txt @@ -8,6 +8,7 @@ mcu:GD32VF103 mcu:MCXA15 mcu:MKL25ZXX mcu:MSP430x5xx +mcu:FT90X mcu:RP2040 mcu:SAMD11 mcu:VALENTYUSB_EPTRI diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index 199cd8ac6..31d808d8e 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -8,6 +8,7 @@ mcu:GD32VF103 mcu:MCXA15 mcu:MKL25ZXX mcu:MSP430x5xx +mcu:FT90X mcu:RP2040 mcu:SAMD11 mcu:VALENTYUSB_EPTRI diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt index 62f4a3795..8ae238584 100644 --- a/examples/device/hid_composite_freertos/skip.txt +++ b/examples/device/hid_composite_freertos/skip.txt @@ -8,6 +8,7 @@ mcu:GD32VF103 mcu:MCXA15 mcu:MKL25ZXX mcu:MSP430x5xx +mcu:FT90X mcu:RP2040 mcu:SAMD11 mcu:VALENTYUSB_EPTRI diff --git a/examples/device/midi_test_freertos/skip.txt b/examples/device/midi_test_freertos/skip.txt index 62f4a3795..8ae238584 100644 --- a/examples/device/midi_test_freertos/skip.txt +++ b/examples/device/midi_test_freertos/skip.txt @@ -8,6 +8,7 @@ mcu:GD32VF103 mcu:MCXA15 mcu:MKL25ZXX mcu:MSP430x5xx +mcu:FT90X mcu:RP2040 mcu:SAMD11 mcu:VALENTYUSB_EPTRI diff --git a/examples/host/cdc_msc_hid_freertos/skip.txt b/examples/host/cdc_msc_hid_freertos/skip.txt index 74ee436cb..bb62547a6 100644 --- a/examples/host/cdc_msc_hid_freertos/skip.txt +++ b/examples/host/cdc_msc_hid_freertos/skip.txt @@ -1,3 +1,4 @@ mcu:CH32F20X mcu:RP2040 board:lpcxpresso54114 +mcu:FT90X diff --git a/hw/bsp/brtmm90x/boards/mm900evxb/board.h b/hw/bsp/brtmm90x/boards/mm900evxb/board.h deleted file mode 100644 index 623033c2c..000000000 --- a/hw/bsp/brtmm90x/boards/mm900evxb/board.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright 2021 Bridgetek Pte Ltd - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MM900EVxB - url: https://brtchip.com/product/mm900ev1b -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -// Note: This definition file covers all MM900EV1B, MM900EV2B, MM900EV3B, -// MM900EV-Lite boards. -// Each of these boards has an FT900 device. - -#ifdef __cplusplus - extern "C" { -#endif - -// UART to use on this board. -#ifndef BOARD_UART -#define BOARD_UART UART0 -#endif - -// UART is on connector CN1. -#ifndef BOARD_GPIO_UART0_TX -#define BOARD_GPIO_UART0_TX 48 // Pin 4 of CN1. -#endif -#ifndef BOARD_GPIO_UART0_RX -#define BOARD_GPIO_UART0_RX 49 // Pin 6 of CN1. -#endif - -// LED is connected to pins 17 (signal) and 15 (GND) of CN1. -#ifndef BOARD_GPIO_LED -#define BOARD_GPIO_LED 35 -#endif -#ifndef BOARD_GPIO_LED_STATE_ON -#define BOARD_GPIO_LED_STATE_ON 1 -#endif -// Button is connected to pins 13 (signal) and 15 (GND) of CN1. -#ifndef BOARD_GPIO_BUTTON -#define BOARD_GPIO_BUTTON 56 -#endif -// Button is pulled up and grounded for active. -#ifndef BOARD_GPIO_BUTTON_STATE_ACTIVE -#define BOARD_GPIO_BUTTON_STATE_ACTIVE 0 -#endif - -// Enable the Remote Wakeup signalling. -// Remote wakeup is wired to pin 40 of CN1. -#ifndef BOARD_GPIO_REMOTE_WAKEUP -#define BOARD_GPIO_REMOTE_WAKEUP 18 -#endif - -// USB VBus signal is connected directly to the FT900. -#ifndef BOARD_USBD_VBUS_DTC_PIN -#define BOARD_USBD_VBUS_DTC_PIN 3 -#endif - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c deleted file mode 100644 index ff24cfe89..000000000 --- a/hw/bsp/brtmm90x/family.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright 2021 Bridgetek Pte Ltd - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Bridgetek -*/ - -#include "bsp/board_api.h" -#include "board.h" - -#include -#include - -#if CFG_TUD_ENABLED -int8_t board_ft9xx_vbus(void); // Board specific implementation of VBUS detection for USB device. -extern void ft9xx_usbd_pm_ISR(uint16_t pmcfg); // Interrupt handler for USB device power management -#endif - -#ifdef BOARD_GPIO_REMOTE_WAKEUP -void gpio_ISR(void); -#endif -void timer_ISR(void); -volatile unsigned int timer_ms = 0; -void board_pm_ISR(void); - -#define WELCOME_MSG "\x1B[2J\x1B[H" \ - "MM900EVxB board\r\n" - -// Initialize on-board peripherals : led, button, uart and USB -void board_init(void) -{ - sys_reset_all(); - - // Enable the UART Device. - sys_enable(sys_device_uart0); - // Set BOARD_UART GPIO function pins for TXD and RXD. -#ifdef BOARD_GPIO_UART_TX - gpio_function(BOARD_GPIO_UART_TX, pad_uart0_txd); /* UART0 TXD */ -#endif -#ifdef BOARD_GPIO_UART_RX - gpio_function(BOARD_GPIO_UART_RX, pad_uart0_rxd); /* UART0 RXD */ -#endif - uart_open(BOARD_UART, /* Device */ - 1, /* Prescaler = 1 */ - UART_DIVIDER_19200_BAUD, /* Divider = 1302 */ - uart_data_bits_8, /* No. Data Bits */ - uart_parity_none, /* Parity */ - uart_stop_bits_1); /* No. Stop Bits */ - // Print out a welcome message. - // Use sizeof to avoid pulling in strlen unnecessarily. - board_uart_write(WELCOME_MSG, sizeof(WELCOME_MSG)); - -#ifdef BOARD_GPIO_LED - gpio_function(BOARD_GPIO_LED, pad_func_0); - gpio_idrive(BOARD_GPIO_LED, pad_drive_12mA); - gpio_dir(BOARD_GPIO_LED, pad_dir_output); -#endif - -#ifdef BOARD_GPIO_BUTTON - gpio_function(BOARD_GPIO_BUTTON, pad_func_0); - // Pull up if active low. Down if active high. - gpio_pull(BOARD_GPIO_BUTTON, (BOARD_GPIO_BUTTON_STATE_ACTIVE == 0)?pad_pull_pullup:pad_pull_pulldown); - gpio_dir(BOARD_GPIO_BUTTON, pad_dir_input); -#endif - - sys_enable(sys_device_timer_wdt); - /* Timer A = 1ms */ - timer_prescaler(timer_select_a, 1000); - timer_init(timer_select_a, 100, timer_direction_down, timer_prescaler_select_on, timer_mode_continuous); - timer_enable_interrupt(timer_select_a); - timer_start(timer_select_a); - interrupt_attach(interrupt_timers, (int8_t)interrupt_timers, timer_ISR); - - // Setup VBUS detect GPIO. If the device is connected then this - // will set the MASK_SYS_PMCFG_DEV_DETECT_EN bit in PMCFG. - gpio_interrupt_disable(BOARD_USBD_VBUS_DTC_PIN); - gpio_function(BOARD_USBD_VBUS_DTC_PIN, pad_vbus_dtc); - gpio_pull(BOARD_USBD_VBUS_DTC_PIN, pad_pull_pulldown); - gpio_dir(BOARD_USBD_VBUS_DTC_PIN, pad_dir_input); - - interrupt_attach(interrupt_0, (int8_t)interrupt_0, board_pm_ISR); - -#ifdef BOARD_GPIO_REMOTE_WAKEUP - // Configuring GPIO pin to wakeup. - // Set up the wakeup pin. - gpio_dir(BOARD_GPIO_REMOTE_WAKEUP, pad_dir_input); - gpio_pull(BOARD_GPIO_REMOTE_WAKEUP, pad_pull_pullup); - - // Attach an interrupt handler. - interrupt_attach(interrupt_gpio, (uint8_t)interrupt_gpio, gpio_ISR); - gpio_interrupt_enable(BOARD_GPIO_REMOTE_WAKEUP, gpio_int_edge_falling); -#endif - - uart_disable_interrupt(BOARD_UART, uart_interrupt_tx); - uart_disable_interrupt(BOARD_UART, uart_interrupt_rx); - - // Enable all peripheral interrupts. - interrupt_enable_globally(); - - TU_LOG1("MM900EV1B board setup complete\r\n"); -}; - -void timer_ISR(void) -{ - if (timer_is_interrupted(timer_select_a)) - { - timer_ms++; - } -} - -#ifdef BOARD_GPIO_REMOTE_WAKEUP -void gpio_ISR(void) -{ - if (gpio_is_interrupted(BOARD_GPIO_REMOTE_WAKEUP)) - { - } -} -#endif - -/* Power management ISR */ -void board_pm_ISR(void) -{ - uint16_t pmcfg = SYS->PMCFG_H; - -#if defined(__FT930__) - if (pmcfg & MASK_SYS_PMCFG_SLAVE_PERI_IRQ_PEND) - { - // Clear d2xx hw engine wakeup. - SYS->PMCFG_H = MASK_SYS_PMCFG_SLAVE_PERI_IRQ_PEND; - } -#endif - if (pmcfg & MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND) - { - // Clear GPIO wakeup pending. - SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND; - } - -#if defined(__FT900__) - // USB device power management interrupts. - if (pmcfg & (MASK_SYS_PMCFG_DEV_CONN_DEV | - MASK_SYS_PMCFG_DEV_DIS_DEV | - MASK_SYS_PMCFG_HOST_RST_DEV | - MASK_SYS_PMCFG_HOST_RESUME_DEV) - ) - { -#if CFG_TUD_ENABLED - ft9xx_usbd_pm_ISR(pmcfg); -#endif - } -#endif -} - -#if CFG_TUD_ENABLED -int8_t board_ft9xx_vbus(void) -{ - return gpio_read(BOARD_USBD_VBUS_DTC_PIN); -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -// Turn LED on or off -void board_led_write(bool state) -{ -#ifdef BOARD_GPIO_LED - gpio_write(BOARD_GPIO_LED, (state == 0)?(BOARD_GPIO_LED_STATE_ON?0:1):BOARD_GPIO_LED_STATE_ON); -#endif -} - -// Get the current state of button -// a '1' means active (pressed), a '0' means inactive. -uint32_t board_button_read(void) -{ - uint32_t state = 0; -#ifdef BOARD_GPIO_BUTTON - state = (gpio_read(BOARD_GPIO_BUTTON) == BOARD_GPIO_BUTTON_STATE_ACTIVE)?1:0; -#endif - return state; -} - -// Get characters from UART -int board_uart_read(uint8_t *buf, int len) -{ - int r = 0; - -#ifdef BOARD_UART - if (uart_rx_has_data(BOARD_UART)) - { - r = uart_readn(BOARD_UART, (uint8_t *)buf, len); - } -#endif - - return r; -} - -// Send characters to UART -int board_uart_write(void const *buf, int len) -{ - int r = 0; - -#ifdef BOARD_UART -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wcast-qual" // uart_writen does not have const for buffer parameter. - r = uart_writen(BOARD_UART, (uint8_t *)((const void *)buf), len); -#pragma GCC diagnostic pop -#endif - - return r; -} - -// Get current milliseconds -uint32_t tusb_time_millis_api(void) -{ - uint32_t safe_ms; - - CRITICAL_SECTION_BEGIN - safe_ms = timer_ms; - CRITICAL_SECTION_END - - return safe_ms; -} - -// Restart the program -// Called in the event of a watchdog timeout -void chip_reboot(void) -{ - // SOFT reset - __asm__("call 0"); - #if 0 - // HARD reset - // Initiates data transfer from Flash Memory to Data Memory (DBG_CMDF2D3) - // followed by a system reboot - dbg_memory_copy(0xfe, 0, 0, 255); -#endif -} diff --git a/hw/bsp/brtmm90x/family.mk b/hw/bsp/brtmm90x/family.mk deleted file mode 100644 index 2de4dc760..000000000 --- a/hw/bsp/brtmm90x/family.mk +++ /dev/null @@ -1,66 +0,0 @@ -# GCC prefix for FT90X compile tools. -CROSS_COMPILE = ft32-elf- -SKIP_NANOLIB = 1 - -# Set to use FT90X prebuilt libraries. -FT9XX_PREBUILT_LIBS = 0 -ifeq ($(FT9XX_PREBUILT_LIBS),1) -# If the FT90X toolchain is installed on Windows systems then the SDK -# include files and prebuilt libraries are at: %FT90X_TOOLCHAIN%/hardware -FT9XX_SDK = $(FT90X_TOOLCHAIN)/hardware -INC += "$(FT9XX_SDK)/include" -else -# The submodule BRTSG-FOSS/ft90x-sdk contains header files and source -# code for the Bridgetek SDK. This can be used instead of the prebuilt -# library. -# The SDK can be used to load specific files from the Bridgetek SDK. -FT9XX_SDK = hw/mcu/bridgetek/ft9xx/ft90x-sdk/Source -INC += "$(TOP)/$(FT9XX_SDK)/include" -endif - -# Add include files which are within the TinyUSB directory structure. -INC += \ - $(TOP)/$(BOARD_PATH) - -# Add required C Compiler flags for FT90X. -CFLAGS += \ - -D__FT900__ \ - -fvar-tracking \ - -fvar-tracking-assignments \ - -fmessage-length=0 \ - -ffunction-sections \ - -DCFG_TUSB_MCU=OPT_MCU_FT90X - -# Maximum USB device speed supported by the board -CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - -# lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration -CFLAGS += -Wno-error=shadow - -# Set Linker flags. -LD_FILE = hw/mcu/bridgetek/ft9xx/scripts/ldscript.ld -LDFLAGS += $(addprefix -L,$(LDINC)) \ - -Xlinker --entry=_start \ - -Wl,-lc - -# Additional Source files for FT90X. -SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c - -# Linker library. -ifneq ($(FT9XX_PREBUILT_LIBS),1) -# Optionally add in files from the Bridgetek SDK instead of the prebuilt -# library. These are the minimum required. -SRC_C += $(FT9XX_SDK)/src/sys.c -SRC_C += $(FT9XX_SDK)/src/interrupt.c -SRC_C += $(FT9XX_SDK)/src/delay.c -SRC_C += $(FT9XX_SDK)/src/timers.c -SRC_C += $(FT9XX_SDK)/src/uart_simple.c -SRC_C += $(FT9XX_SDK)/src/gpio.c -else -# Or if using the prebuilt libraries add them. -LDFLAGS += -L"$(FT9XX_SDK)/lib" -LIBS += -lft900 -endif - -# Not required crt0 file for FT90X. Use compiler built-in file. -#SRC_S += hw/mcu/bridgetek/ft9xx/scripts/crt0.S diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 8cc2af190..96d6993e6 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -881,6 +881,21 @@ function(family_flash_uniflash TARGET) set_property(TARGET ${TARGET}-uniflash PROPERTY FOLDER ${TARGET}-group) endfunction() +# Add flash ft9xx target need to remove kernal's ftdi_sio and bind D2XX drivers +# sudo rmmod ftdi_sio && for i in 0 1 2 3; do sudo sh -c "echo 3-3.4:1.$i > /sys/bus/usb/drivers/ftdi_sio/unbind" 2>/dev/null; done +function(family_flash_ft9xx TARGET) + if (NOT DEFINED FT9XXPROG) + set(FT9XXPROG FT9xxProg) + endif () + + add_custom_target(${TARGET}-ft9xx + DEPENDS ${TARGET} + COMMAND ${FT9XXPROG} -f $/${TARGET}.bin + ) + + set_property(TARGET ${TARGET}-ft9xx PROPERTY FOLDER ${TARGET}-group) +endfunction() + #---------------------------------- # Family specific #---------------------------------- diff --git a/hw/bsp/ft9xx/boards/mm900evxb/board.cmake b/hw/bsp/ft9xx/boards/mm900evxb/board.cmake new file mode 100644 index 000000000..49b779de4 --- /dev/null +++ b/hw/bsp/ft9xx/boards/mm900evxb/board.cmake @@ -0,0 +1,5 @@ +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __FT900__ + ) +endfunction() diff --git a/hw/bsp/ft9xx/boards/mm900evxb/board.h b/hw/bsp/ft9xx/boards/mm900evxb/board.h new file mode 100644 index 000000000..623033c2c --- /dev/null +++ b/hw/bsp/ft9xx/boards/mm900evxb/board.h @@ -0,0 +1,87 @@ +/* + * The MIT License (MIT) + * + * Copyright 2021 Bridgetek Pte Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MM900EVxB + url: https://brtchip.com/product/mm900ev1b +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +// Note: This definition file covers all MM900EV1B, MM900EV2B, MM900EV3B, +// MM900EV-Lite boards. +// Each of these boards has an FT900 device. + +#ifdef __cplusplus + extern "C" { +#endif + +// UART to use on this board. +#ifndef BOARD_UART +#define BOARD_UART UART0 +#endif + +// UART is on connector CN1. +#ifndef BOARD_GPIO_UART0_TX +#define BOARD_GPIO_UART0_TX 48 // Pin 4 of CN1. +#endif +#ifndef BOARD_GPIO_UART0_RX +#define BOARD_GPIO_UART0_RX 49 // Pin 6 of CN1. +#endif + +// LED is connected to pins 17 (signal) and 15 (GND) of CN1. +#ifndef BOARD_GPIO_LED +#define BOARD_GPIO_LED 35 +#endif +#ifndef BOARD_GPIO_LED_STATE_ON +#define BOARD_GPIO_LED_STATE_ON 1 +#endif +// Button is connected to pins 13 (signal) and 15 (GND) of CN1. +#ifndef BOARD_GPIO_BUTTON +#define BOARD_GPIO_BUTTON 56 +#endif +// Button is pulled up and grounded for active. +#ifndef BOARD_GPIO_BUTTON_STATE_ACTIVE +#define BOARD_GPIO_BUTTON_STATE_ACTIVE 0 +#endif + +// Enable the Remote Wakeup signalling. +// Remote wakeup is wired to pin 40 of CN1. +#ifndef BOARD_GPIO_REMOTE_WAKEUP +#define BOARD_GPIO_REMOTE_WAKEUP 18 +#endif + +// USB VBus signal is connected directly to the FT900. +#ifndef BOARD_USBD_VBUS_DTC_PIN +#define BOARD_USBD_VBUS_DTC_PIN 3 +#endif + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/ft9xx/boards/mm900evxb/board.mk b/hw/bsp/ft9xx/boards/mm900evxb/board.mk new file mode 100644 index 000000000..4e22ff2e6 --- /dev/null +++ b/hw/bsp/ft9xx/boards/mm900evxb/board.mk @@ -0,0 +1 @@ +CFLAGS += -D__FT900__ diff --git a/hw/bsp/ft9xx/family.c b/hw/bsp/ft9xx/family.c new file mode 100644 index 000000000..ff24cfe89 --- /dev/null +++ b/hw/bsp/ft9xx/family.c @@ -0,0 +1,260 @@ +/* + * The MIT License (MIT) + * + * Copyright 2021 Bridgetek Pte Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: Bridgetek +*/ + +#include "bsp/board_api.h" +#include "board.h" + +#include +#include + +#if CFG_TUD_ENABLED +int8_t board_ft9xx_vbus(void); // Board specific implementation of VBUS detection for USB device. +extern void ft9xx_usbd_pm_ISR(uint16_t pmcfg); // Interrupt handler for USB device power management +#endif + +#ifdef BOARD_GPIO_REMOTE_WAKEUP +void gpio_ISR(void); +#endif +void timer_ISR(void); +volatile unsigned int timer_ms = 0; +void board_pm_ISR(void); + +#define WELCOME_MSG "\x1B[2J\x1B[H" \ + "MM900EVxB board\r\n" + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void) +{ + sys_reset_all(); + + // Enable the UART Device. + sys_enable(sys_device_uart0); + // Set BOARD_UART GPIO function pins for TXD and RXD. +#ifdef BOARD_GPIO_UART_TX + gpio_function(BOARD_GPIO_UART_TX, pad_uart0_txd); /* UART0 TXD */ +#endif +#ifdef BOARD_GPIO_UART_RX + gpio_function(BOARD_GPIO_UART_RX, pad_uart0_rxd); /* UART0 RXD */ +#endif + uart_open(BOARD_UART, /* Device */ + 1, /* Prescaler = 1 */ + UART_DIVIDER_19200_BAUD, /* Divider = 1302 */ + uart_data_bits_8, /* No. Data Bits */ + uart_parity_none, /* Parity */ + uart_stop_bits_1); /* No. Stop Bits */ + // Print out a welcome message. + // Use sizeof to avoid pulling in strlen unnecessarily. + board_uart_write(WELCOME_MSG, sizeof(WELCOME_MSG)); + +#ifdef BOARD_GPIO_LED + gpio_function(BOARD_GPIO_LED, pad_func_0); + gpio_idrive(BOARD_GPIO_LED, pad_drive_12mA); + gpio_dir(BOARD_GPIO_LED, pad_dir_output); +#endif + +#ifdef BOARD_GPIO_BUTTON + gpio_function(BOARD_GPIO_BUTTON, pad_func_0); + // Pull up if active low. Down if active high. + gpio_pull(BOARD_GPIO_BUTTON, (BOARD_GPIO_BUTTON_STATE_ACTIVE == 0)?pad_pull_pullup:pad_pull_pulldown); + gpio_dir(BOARD_GPIO_BUTTON, pad_dir_input); +#endif + + sys_enable(sys_device_timer_wdt); + /* Timer A = 1ms */ + timer_prescaler(timer_select_a, 1000); + timer_init(timer_select_a, 100, timer_direction_down, timer_prescaler_select_on, timer_mode_continuous); + timer_enable_interrupt(timer_select_a); + timer_start(timer_select_a); + interrupt_attach(interrupt_timers, (int8_t)interrupt_timers, timer_ISR); + + // Setup VBUS detect GPIO. If the device is connected then this + // will set the MASK_SYS_PMCFG_DEV_DETECT_EN bit in PMCFG. + gpio_interrupt_disable(BOARD_USBD_VBUS_DTC_PIN); + gpio_function(BOARD_USBD_VBUS_DTC_PIN, pad_vbus_dtc); + gpio_pull(BOARD_USBD_VBUS_DTC_PIN, pad_pull_pulldown); + gpio_dir(BOARD_USBD_VBUS_DTC_PIN, pad_dir_input); + + interrupt_attach(interrupt_0, (int8_t)interrupt_0, board_pm_ISR); + +#ifdef BOARD_GPIO_REMOTE_WAKEUP + // Configuring GPIO pin to wakeup. + // Set up the wakeup pin. + gpio_dir(BOARD_GPIO_REMOTE_WAKEUP, pad_dir_input); + gpio_pull(BOARD_GPIO_REMOTE_WAKEUP, pad_pull_pullup); + + // Attach an interrupt handler. + interrupt_attach(interrupt_gpio, (uint8_t)interrupt_gpio, gpio_ISR); + gpio_interrupt_enable(BOARD_GPIO_REMOTE_WAKEUP, gpio_int_edge_falling); +#endif + + uart_disable_interrupt(BOARD_UART, uart_interrupt_tx); + uart_disable_interrupt(BOARD_UART, uart_interrupt_rx); + + // Enable all peripheral interrupts. + interrupt_enable_globally(); + + TU_LOG1("MM900EV1B board setup complete\r\n"); +}; + +void timer_ISR(void) +{ + if (timer_is_interrupted(timer_select_a)) + { + timer_ms++; + } +} + +#ifdef BOARD_GPIO_REMOTE_WAKEUP +void gpio_ISR(void) +{ + if (gpio_is_interrupted(BOARD_GPIO_REMOTE_WAKEUP)) + { + } +} +#endif + +/* Power management ISR */ +void board_pm_ISR(void) +{ + uint16_t pmcfg = SYS->PMCFG_H; + +#if defined(__FT930__) + if (pmcfg & MASK_SYS_PMCFG_SLAVE_PERI_IRQ_PEND) + { + // Clear d2xx hw engine wakeup. + SYS->PMCFG_H = MASK_SYS_PMCFG_SLAVE_PERI_IRQ_PEND; + } +#endif + if (pmcfg & MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND) + { + // Clear GPIO wakeup pending. + SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND; + } + +#if defined(__FT900__) + // USB device power management interrupts. + if (pmcfg & (MASK_SYS_PMCFG_DEV_CONN_DEV | + MASK_SYS_PMCFG_DEV_DIS_DEV | + MASK_SYS_PMCFG_HOST_RST_DEV | + MASK_SYS_PMCFG_HOST_RESUME_DEV) + ) + { +#if CFG_TUD_ENABLED + ft9xx_usbd_pm_ISR(pmcfg); +#endif + } +#endif +} + +#if CFG_TUD_ENABLED +int8_t board_ft9xx_vbus(void) +{ + return gpio_read(BOARD_USBD_VBUS_DTC_PIN); +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +// Turn LED on or off +void board_led_write(bool state) +{ +#ifdef BOARD_GPIO_LED + gpio_write(BOARD_GPIO_LED, (state == 0)?(BOARD_GPIO_LED_STATE_ON?0:1):BOARD_GPIO_LED_STATE_ON); +#endif +} + +// Get the current state of button +// a '1' means active (pressed), a '0' means inactive. +uint32_t board_button_read(void) +{ + uint32_t state = 0; +#ifdef BOARD_GPIO_BUTTON + state = (gpio_read(BOARD_GPIO_BUTTON) == BOARD_GPIO_BUTTON_STATE_ACTIVE)?1:0; +#endif + return state; +} + +// Get characters from UART +int board_uart_read(uint8_t *buf, int len) +{ + int r = 0; + +#ifdef BOARD_UART + if (uart_rx_has_data(BOARD_UART)) + { + r = uart_readn(BOARD_UART, (uint8_t *)buf, len); + } +#endif + + return r; +} + +// Send characters to UART +int board_uart_write(void const *buf, int len) +{ + int r = 0; + +#ifdef BOARD_UART +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-qual" // uart_writen does not have const for buffer parameter. + r = uart_writen(BOARD_UART, (uint8_t *)((const void *)buf), len); +#pragma GCC diagnostic pop +#endif + + return r; +} + +// Get current milliseconds +uint32_t tusb_time_millis_api(void) +{ + uint32_t safe_ms; + + CRITICAL_SECTION_BEGIN + safe_ms = timer_ms; + CRITICAL_SECTION_END + + return safe_ms; +} + +// Restart the program +// Called in the event of a watchdog timeout +void chip_reboot(void) +{ + // SOFT reset + __asm__("call 0"); + #if 0 + // HARD reset + // Initiates data transfer from Flash Memory to Data Memory (DBG_CMDF2D3) + // followed by a system reboot + dbg_memory_copy(0xfe, 0, 0, 255); +#endif +} diff --git a/hw/bsp/ft9xx/family.cmake b/hw/bsp/ft9xx/family.cmake new file mode 100644 index 000000000..31efb3c10 --- /dev/null +++ b/hw/bsp/ft9xx/family.cmake @@ -0,0 +1,74 @@ +include_guard() + +set(FT9XX_SDK ${TOP}/hw/mcu/bridgetek/ft9xx/ft90x-sdk/Source) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU ft32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/ft32_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS FT90X CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} STATIC + ${FT9XX_SDK}/src/sys.c + ${FT9XX_SDK}/src/interrupt.c + ${FT9XX_SDK}/src/delay.c + ${FT9XX_SDK}/src/timers.c + ${FT9XX_SDK}/src/uart_simple.c + ${FT9XX_SDK}/src/gpio.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${FT9XX_SDK}/include + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) + target_compile_options(${BOARD_TARGET} PUBLIC + -fmessage-length=0 + ) + + update_board(${BOARD_TARGET}) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_FT90X) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/bridgetek/ft9xx/dcd_ft9xx.c + ${FT9XX_SDK}/src/bootstrap.c + ) + set_source_files_properties(${FT9XX_SDK}/src/bootstrap.c PROPERTIES + COMPILE_OPTIONS "-w") + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + target_compile_options(${TARGET} PUBLIC + -Wno-error=shadow + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${TOP}/hw/mcu/bridgetek/ft9xx/scripts/ldscript.ld" + "LINKER:--entry=_start" + ) + endif () + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_ft9xx(${TARGET}) +endfunction() diff --git a/hw/bsp/ft9xx/family.mk b/hw/bsp/ft9xx/family.mk new file mode 100644 index 000000000..9d71bf321 --- /dev/null +++ b/hw/bsp/ft9xx/family.mk @@ -0,0 +1,75 @@ +# GCC prefix for FT90X compile tools. +CROSS_COMPILE = ft32-elf- +SKIP_NANOLIB = 1 + +# Set to use FT90X prebuilt libraries. +FT9XX_PREBUILT_LIBS = 0 +ifeq ($(FT9XX_PREBUILT_LIBS),1) +# If the FT90X toolchain is installed on Windows systems then the SDK +# include files and prebuilt libraries are at: %FT90X_TOOLCHAIN%/hardware +FT9XX_SDK = $(FT90X_TOOLCHAIN)/hardware +INC += "$(FT9XX_SDK)/include" +else +# The submodule BRTSG-FOSS/ft90x-sdk contains header files and source +# code for the Bridgetek SDK. This can be used instead of the prebuilt +# library. +# The SDK can be used to load specific files from the Bridgetek SDK. +FT9XX_SDK = hw/mcu/bridgetek/ft9xx/ft90x-sdk/Source +INC += "$(TOP)/$(FT9XX_SDK)/include" +endif + +include $(TOP)/$(BOARD_PATH)/board.mk + +# Add include files which are within the TinyUSB directory structure. +INC += \ + $(TOP)/$(BOARD_PATH) + +# Add required C Compiler flags for FT9XX. +CFLAGS += \ + -fvar-tracking \ + -fvar-tracking-assignments \ + -fmessage-length=0 \ + -ffunction-sections \ + -DCFG_TUSB_MCU=OPT_MCU_FT90X + +# Maximum USB device speed supported by the board +CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + +# lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration +CFLAGS += -Wno-error=shadow + +# Set Linker flags. +LD_FILE = hw/mcu/bridgetek/ft9xx/scripts/ldscript.ld +LDFLAGS += $(addprefix -L,$(LDINC)) \ + -Xlinker --entry=_start \ + -Wl,-lc + +# Additional Source files for FT90X. +SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c + +# Linker library. +ifneq ($(FT9XX_PREBUILT_LIBS),1) +# Optionally add in files from the Bridgetek SDK instead of the prebuilt +# library. These are the minimum required. +SRC_C += $(FT9XX_SDK)/src/bootstrap.c +SRC_C += $(FT9XX_SDK)/src/sys.c +SRC_C += $(FT9XX_SDK)/src/interrupt.c +SRC_C += $(FT9XX_SDK)/src/delay.c +SRC_C += $(FT9XX_SDK)/src/timers.c +SRC_C += $(FT9XX_SDK)/src/uart_simple.c +SRC_C += $(FT9XX_SDK)/src/gpio.c +else +# Or if using the prebuilt libraries add them. +LDFLAGS += -L"$(FT9XX_SDK)/lib" +LIBS += -lft900 +endif + +# Not required crt0 file for FT90X. Use compiler built-in file. +#SRC_S += hw/mcu/bridgetek/ft9xx/scripts/crt0.S + +# Flash using FT9xxProg, need to remove kernal's ftdi_sio and bind D2XX drivers +# sudo rmmod ftdi_sio && for i in 0 1 2 3; do sudo sh -c "echo 3-3.4:1.$i > /sys/bus/usb/drivers/ftdi_sio/unbind" 2>/dev/null; done +FT9XXPROG ?= FT9xxProg +flash: flash-ft9xx +flash-ft9xx: $(BUILD)/$(PROJECT).bin + $(FT9XXPROG) -f $< diff --git a/tools/get_deps.py b/tools/get_deps.py index 77c3a593a..c4ec5454e 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -35,8 +35,8 @@ deps_optional = { 'b20b398d3e5e2007594e54a74ba3d2a2e50ddd75', 'maxim'], 'hw/mcu/bridgetek/ft9xx/ft90x-sdk': ['https://github.com/BRTSG-FOSS/ft90x-sdk.git', - '91060164afe239fcb394122e8bf9eb24d3194eb1', - 'brtmm90x'], + '03f74eac84645178fdde7f2e5ca9acdcb7bd9dcd', + 'ft9xx'], 'hw/mcu/broadcom': ['https://github.com/adafruit/broadcom-peripherals.git', '08370086080759ed54ac1136d62d2ad24c6fa267', 'broadcom_32bit broadcom_64bit'], -- cgit v1.3.1