From a4d0df7fcf4ab39034b73c8641e669dcd277cb50 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 24 Nov 2025 00:17:58 +0100 Subject: bsp/stm32c0: use external clock, increase stack size Signed-off-by: HiFiPhile --- .../boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld | 2 +- hw/bsp/stm32c0/boards/stm32c071nucleo/board.cmake | 1 + hw/bsp/stm32c0/boards/stm32c071nucleo/board.h | 32 +++++++++------------ hw/bsp/stm32c0/boards/stm32c071nucleo/board.mk | 2 +- .../boards/stm32c071nucleo/stm32c071xx_flash.icf | 33 ++++++++++++++++++++++ hw/bsp/stm32c0/family.cmake | 1 - hw/bsp/stm32c0/stm32c0xx_hal_conf.h | 2 +- 7 files changed, 50 insertions(+), 23 deletions(-) create mode 100644 hw/bsp/stm32c0/boards/stm32c071nucleo/stm32c071xx_flash.icf diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld b/hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld index 8acd49f9d..6c7e203f1 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld @@ -36,7 +36,7 @@ ENTRY(Reset_Handler) _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0xc00; /* required amount of stack */ /* Memories definition */ MEMORY diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.cmake b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.cmake index 2a319a73c..ed70cffbf 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.cmake +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.cmake @@ -2,6 +2,7 @@ set(MCU_VARIANT stm32c071xx) set(JLINK_DEVICE stm32c071rb) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32C071RBTx_FLASH.ld) +set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/stm32c071xx_flash.icf) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h index 751df2251..460b42a21 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h @@ -64,36 +64,30 @@ static inline void board_clock_init(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_CRSInitTypeDef RCC_CRSInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - /* -1- Enable HSIUSB48 Oscillator */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + __HAL_FLASH_SET_LATENCY(FLASH_LATENCY_1); + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; HAL_RCC_OscConfig(&RCC_OscInitStruct); - /* -2- Initializes the CPU, AHB and APB buses clocks */ + /** Initializes the CPU, AHB and APB buses clocks + */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK |RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSIUSB48; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSE; RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); - - __HAL_RCC_CRS_CLK_ENABLE(); - - // Configures CRS - RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; - RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; - RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING; - RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000,1000); - RCC_CRSInitStruct.ErrorLimitValue = 34; - RCC_CRSInitStruct.HSI48CalibrationValue = 32; - - HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct); + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSE; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); } - #endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.mk b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.mk index 67a9b59a8..fd22fc8d4 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.mk +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.mk @@ -7,7 +7,7 @@ LD_FILE_GCC = $(BOARD_PATH)/STM32C071RBTx_FLASH.ld # IAR SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32c071xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32c071xx_flash.icf +LD_FILE_IAR = $(BOARD_PATH)/stm32c071xx_flash.icf # For flash-jlink target JLINK_DEVICE = stm32c071rb diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/stm32c071xx_flash.icf b/hw/bsp/stm32c0/boards/stm32c071nucleo/stm32c071xx_flash.icf new file mode 100644 index 000000000..684f41dc6 --- /dev/null +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/stm32c071xx_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20005FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0xc00; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; + +export symbol __ICFEDIT_region_RAM_start__; +export symbol __ICFEDIT_region_RAM_end__; diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index 90d5322b7..f68e80895 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -24,7 +24,6 @@ set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) set(LD_FILE_Clang ${LD_FILE_GNU}) -set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/stm32c0/stm32c0xx_hal_conf.h b/hw/bsp/stm32c0/stm32c0xx_hal_conf.h index 678b6ee0d..874251c7f 100644 --- a/hw/bsp/stm32c0/stm32c0xx_hal_conf.h +++ b/hw/bsp/stm32c0/stm32c0xx_hal_conf.h @@ -92,7 +92,7 @@ extern "C" { * (when HSE is used as system clock source, directly or through the PLL). */ #if !defined (HSE_VALUE) -#define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#define HSE_VALUE (48000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ #if !defined (HSE_STARTUP_TIMEOUT) -- cgit v1.3.1 From fb631c9a402478702fcce7168a5f1cc3b231e959 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 24 Nov 2025 00:26:05 +0100 Subject: hcd: add fsdev driver Signed-off-by: HiFiPhile --- examples/host/device_info/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + hw/bsp/stm32c0/family.c | 4 +- hw/bsp/stm32c0/family.cmake | 1 + hw/bsp/stm32c0/family.mk | 1 + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 20 +- src/portable/st/stm32_fsdev/fsdev_at32.h | 16 +- src/portable/st/stm32_fsdev/fsdev_ch32.h | 9 +- src/portable/st/stm32_fsdev/fsdev_stm32.h | 15 +- src/portable/st/stm32_fsdev/fsdev_type.h | 41 +- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 833 ++++++++++++++++++++++++++ 11 files changed, 917 insertions(+), 25 deletions(-) create mode 100644 src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index 61a08f68d..069f92d83 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -13,6 +13,7 @@ mcu:MSP432E4 mcu:RP2040 mcu:RX65X mcu:RAXXX +mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index cba58f8e8..a7bebf1d9 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -13,6 +13,7 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 diff --git a/hw/bsp/stm32c0/family.c b/hw/bsp/stm32c0/family.c index 09704b527..b04a9cea5 100644 --- a/hw/bsp/stm32c0/family.c +++ b/hw/bsp/stm32c0/family.c @@ -37,13 +37,13 @@ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ void USB_DRD_FS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } // Startup code generated by STM32CubeIDE uses USB_IRQHandler, while // stm32c071xx.s from cmsis_device_c0 uses USB_DRD_FS_IRQHandler. void USB_IRQHandler(void) { - USB_DRD_FS_IRQHandler(); + tusb_int_handler(0, true); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index f68e80895..6e04b20f4 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -66,6 +66,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) diff --git a/hw/bsp/stm32c0/family.mk b/hw/bsp/stm32c0/family.mk index bdb34454e..fd03ad537 100644 --- a/hw/bsp/stm32c0/family.mk +++ b/hw/bsp/stm32c0/family.mk @@ -29,6 +29,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 381aa0b40..db1a5784a 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -123,8 +123,6 @@ #error "Unknown USB IP" #endif -#include "fsdev_type.h" - //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -848,6 +846,24 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { ep_write(ep_idx, ep_reg, true); } +void dcd_int_enable(uint8_t rhport) { + fsdev_int_enable(rhport); +} + +void dcd_int_disable(uint8_t rhport) { + fsdev_int_disable(rhport); +} + +#if defined(USB_BCDR_DPPU) || defined(SYSCFG_PMC_USB_PU) +void dcd_connect(uint8_t rhport) { + fsdev_connect(rhport); +} + +void dcd_disconnect(uint8_t rhport) { + fsdev_disconnect(rhport); +} +#endif + //--------------------------------------------------------------------+ // PMA read/write //--------------------------------------------------------------------+ diff --git a/src/portable/st/stm32_fsdev/fsdev_at32.h b/src/portable/st/stm32_fsdev/fsdev_at32.h index deb1de2a8..03490ee24 100644 --- a/src/portable/st/stm32_fsdev/fsdev_at32.h +++ b/src/portable/st/stm32_fsdev/fsdev_at32.h @@ -168,7 +168,7 @@ enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; #error "Unsupported MCU" #endif -void dcd_int_enable(uint8_t rhport) { +void fsdev_int_enable(uint8_t rhport) { (void)rhport; #if (CFG_TUSB_MCU == OPT_MCU_AT32F403A_407) || (CFG_TUSB_MCU == OPT_MCU_AT32F413) // AT32F403A/407 devices allow to remap the USB interrupt vectors from @@ -187,7 +187,7 @@ void dcd_int_enable(uint8_t rhport) { } } -void dcd_int_disable(uint8_t rhport) { +void fsdev_int_disable(uint8_t rhport) { (void)rhport; #if (CFG_TUSB_MCU == OPT_MCU_AT32F403A_407) || (CFG_TUSB_MCU == OPT_MCU_AT32F413) // AT32F403A/407 devices allow to remap the USB interrupt vectors from @@ -206,20 +206,20 @@ void dcd_int_disable(uint8_t rhport) { } } -void dcd_disconnect(uint8_t rhport) { +void fsdev_disconnect(uint8_t rhport) { (void) rhport; /* disable usb phy */ - FSDEV_REG->CNTR |= USB_CNTR_PDWN; + *(volatile uint32_t*)(FSDEV_REG_BASE + 0x40) |= USB_CNTR_PDWN; /* D+ 1.5k pull-up disable, USB->cfg_bit.puo = TRUE; */ - *(uint32_t *)(FSDEV_REG_BASE+0x60) |= (1u<<1); + *(volatile uint32_t *)(FSDEV_REG_BASE+0x60) |= (1u<<1); } -void dcd_connect(uint8_t rhport) { +void fsdev_connect(uint8_t rhport) { (void) rhport; /* enable usb phy */ - FSDEV_REG->CNTR &= ~USB_CNTR_PDWN; + *(volatile uint32_t*)(FSDEV_REG_BASE + 0x40) &= ~USB_CNTR_PDWN; /* Dp 1.5k pull-up enable, USB->cfg_bit.puo = 0; */ - *(uint32_t *)(FSDEV_REG_BASE+0x60) &= ~(1u<<1); + *(volatile uint32_t *)(FSDEV_REG_BASE+0x60) &= ~(1u<<1); } #endif diff --git a/src/portable/st/stm32_fsdev/fsdev_ch32.h b/src/portable/st/stm32_fsdev/fsdev_ch32.h index ceebb6dab..547f3bd1b 100644 --- a/src/portable/st/stm32_fsdev/fsdev_ch32.h +++ b/src/portable/st/stm32_fsdev/fsdev_ch32.h @@ -168,6 +168,7 @@ #define USB_EPRX_DTOG2 ((uint16_t)0x2000U) /*!< EndPoint RX Data TOGgle bit1 */ #define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK) +#include "fsdev_type.h" //--------------------------------------------------------------------+ // @@ -184,26 +185,26 @@ enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; #error "Unsupported MCU" #endif -void dcd_int_enable(uint8_t rhport) { +void fsdev_int_enable(uint8_t rhport) { (void)rhport; for(uint8_t i=0; i < FSDEV_IRQ_NUM; i++) { NVIC_EnableIRQ(fsdev_irq[i]); } } -void dcd_int_disable(uint8_t rhport) { +void fsdev_int_disable(uint8_t rhport) { (void)rhport; for(uint8_t i=0; i < FSDEV_IRQ_NUM; i++) { NVIC_DisableIRQ(fsdev_irq[i]); } } -void dcd_disconnect(uint8_t rhport) { +void fsdev_disconnect(uint8_t rhport) { (void) rhport; EXTEN->EXTEN_CTR &= ~EXTEN_USBD_PU_EN; } -void dcd_connect(uint8_t rhport) { +void fsdev_connect(uint8_t rhport) { (void) rhport; EXTEN->EXTEN_CTR |= EXTEN_USBD_PU_EN; } diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index 30ffadc35..d47d23f14 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -321,6 +321,8 @@ #define FSDEV_USE_SBUF_ISO 0 #endif +#include "fsdev_type.h" + //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ @@ -372,7 +374,7 @@ static const IRQn_Type fsdev_irq[] = { }; enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; -void dcd_int_enable(uint8_t rhport) { +void fsdev_int_enable(uint8_t rhport) { (void)rhport; // forces write to RAM before allowing ISR to execute @@ -395,7 +397,7 @@ void dcd_int_enable(uint8_t rhport) { } } -void dcd_int_disable(uint8_t rhport) { +void fsdev_int_disable(uint8_t rhport) { (void)rhport; #if CFG_TUSB_MCU == OPT_MCU_STM32F3 && defined(SYSCFG_CFGR1_USB_IT_RMP) @@ -420,28 +422,27 @@ void dcd_int_disable(uint8_t rhport) { // Define only on MCU with internal pull-up. BSP can define on MCU without internal PU. #if defined(USB_BCDR_DPPU) -void dcd_disconnect(uint8_t rhport) { +void fsdev_disconnect(uint8_t rhport) { (void)rhport; USB->BCDR &= ~(USB_BCDR_DPPU); } -void dcd_connect(uint8_t rhport) { +void fsdev_connect(uint8_t rhport) { (void)rhport; USB->BCDR |= USB_BCDR_DPPU; } #elif defined(SYSCFG_PMC_USB_PU) // works e.g. on STM32L151 -void dcd_disconnect(uint8_t rhport) { +void fsdev_disconnect(uint8_t rhport) { (void)rhport; SYSCFG->PMC &= ~(SYSCFG_PMC_USB_PU); } -void dcd_connect(uint8_t rhport) { +void fsdev_connect(uint8_t rhport) { (void)rhport; SYSCFG->PMC |= SYSCFG_PMC_USB_PU; } #endif - #endif /* TUSB_FSDEV_STM32_H */ diff --git a/src/portable/st/stm32_fsdev/fsdev_type.h b/src/portable/st/stm32_fsdev/fsdev_type.h index cf36576bb..2b340d64a 100644 --- a/src/portable/st/stm32_fsdev/fsdev_type.h +++ b/src/portable/st/stm32_fsdev/fsdev_type.h @@ -174,6 +174,14 @@ typedef enum { #define EP_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) #define EP_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) +#define CH_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) +#define CH_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) + +void fsdev_int_enable(uint8_t rhport); +void fsdev_int_disable(uint8_t rhport); +void fsdev_connect(uint8_t rhport); +void fsdev_disconnect(uint8_t rhport); + //--------------------------------------------------------------------+ // Endpoint Helper // - CTR is write 0 to clear @@ -186,13 +194,13 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_read(uint32_t ep_id) { TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value, bool need_exclusive) { if (need_exclusive) { - dcd_int_disable(0); + fsdev_int_disable(0); } FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; if (need_exclusive) { - dcd_int_enable(0); + fsdev_int_enable(0); } } @@ -216,6 +224,35 @@ TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; } +//--------------------------------------------------------------------+ +// Channel Helper +// - Direction is opposite to endpoint direction +//--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ch_read(uint32_t ch_id) { + return ep_read(ch_id); +} + +TU_ATTR_ALWAYS_INLINE static inline void ch_write(uint32_t ch_id, uint32_t value, bool need_exclusive) { + ep_write(ch_id, value, need_exclusive); +} + +TU_ATTR_ALWAYS_INLINE static inline void ch_write_clear_ctr(uint32_t ch_id, tusb_dir_t dir) { + uint32_t reg = FSDEV_REG->ep[ch_id].reg; + reg |= USB_EP_CTR_TX | USB_EP_CTR_RX; + reg &= USB_EPREG_MASK; + reg &= ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); + ep_write(ch_id, reg, false); +} + +TU_ATTR_ALWAYS_INLINE static inline void ch_change_status(uint32_t* reg, tusb_dir_t dir, ep_stat_t state) { + *reg ^= (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); +} + +TU_ATTR_ALWAYS_INLINE static inline void ch_change_dtog(uint32_t* reg, tusb_dir_t dir, uint8_t state) { + *reg ^= (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); +} + //--------------------------------------------------------------------+ // BTable Helper //--------------------------------------------------------------------+ diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c new file mode 100644 index 000000000..1c08f64d6 --- /dev/null +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -0,0 +1,833 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 HiFiPhile (Zixun LI) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/********************************************** + * This driver provides USB Host controller support for STM32 MCUs with "USB A"/"PCD"/"HCD" peripheral. + * This covers these MCU families: + * + * C0 2048 byte buffer; 32-bit bus; host mode + * G0 2048 byte buffer; 32-bit bus; host mode + * H5 2048 byte buffer; 32-bit bus; host mode + * U535, U545 2048 byte buffer; 32-bit bus; host mode + * + */ + +#include "tusb_option.h" + +#if CFG_TUH_ENABLED && defined(TUP_USBIP_FSDEV) && \ + TU_CHECK_MCU(OPT_MCU_STM32C0, OPT_MCU_STM32G0, OPT_MCU_STM32H5, OPT_MCU_STM32U5) + +#include "host/hcd.h" +#include "host/usbh.h" + +#if defined(TUP_USBIP_FSDEV_STM32) + #include "fsdev_stm32.h" +#else + #error "Unknown USB IP" +#endif + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF +//--------------------------------------------------------------------+ + +// Debug level for FSDEV +#define FSDEV_DEBUG 1 + +// Max number of endpoints application can open, can be larger than FSDEV_EP_COUNT +#ifndef CFG_TUH_FSDEV_ENDPOINT_MAX + #define CFG_TUH_FSDEV_ENDPOINT_MAX 16u +#endif + +TU_VERIFY_STATIC(CFG_TUH_FSDEV_ENDPOINT_MAX <= 255, "currently only use 8-bit for index"); + +enum { + HCD_XFER_ERROR_MAX = 3 +}; + +// Host driver struct for each opened endpoint +typedef struct { + uint8_t *buffer; + uint16_t buflen; + uint16_t max_packet_size; + uint8_t dev_addr; + uint8_t ep_addr; + uint8_t ep_type; + uint8_t interval; + bool low_speed; + bool allocated; + bool next_setup; +} hcd_endpoint_t; + +// Additional info for each channel when it is active +typedef struct { + hcd_endpoint_t* edpt[2]; // OUT/IN + uint16_t queued_len[2]; + uint8_t dev_addr; + uint8_t ep_num; + uint8_t ep_type; + bool allocated[2]; + uint8_t retry[2]; + uint8_t result; +} hcd_xfer_t; + +// Root hub port state +static struct { + bool connected; +} _hcd_port; + +typedef struct { + hcd_xfer_t xfer[FSDEV_EP_COUNT]; + hcd_endpoint_t edpt[CFG_TUH_FSDEV_ENDPOINT_MAX]; +} hcd_data_t; + +hcd_data_t _hcd_data; + +//--------------------------------------------------------------------+ +// Prototypes +//--------------------------------------------------------------------+ + +static uint8_t endpoint_alloc(void); +static uint8_t endpoint_find(uint8_t dev_addr, uint8_t ep_addr); +static uint32_t hcd_pma_alloc(uint8_t channel, tusb_dir_t dir, uint16_t len); +static uint8_t channel_alloc(uint8_t dev_addr, uint8_t ep_addr, uint8_t ep_type); +static bool hcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes); +static bool hcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes); +static bool edpt_xfer_kickoff(uint8_t ep_id); +static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir); +static void edpoint_close(uint8_t ep_id); +static void port_status_handler(uint8_t rhport, bool in_isr); +//--------------------------------------------------------------------+ +// Inline Functions +//--------------------------------------------------------------------+ + +static inline void endpoint_dealloc(hcd_endpoint_t* edpt) { + edpt->allocated = false; +} + +static inline void channel_dealloc(hcd_xfer_t* xfer, tusb_dir_t dir) { + xfer->allocated[dir] = false; +} + +//--------------------------------------------------------------------+ +// Controller API +//--------------------------------------------------------------------+ + +// Optional HCD configuration, called by tuh_configure() +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { + (void) rhport; + (void) cfg_id; + (void) cfg_param; + return false; +} + +// Initialize controller to host mode +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; + + // Follow the RM mentions to use a special ordering of PDWN and FRES + for (volatile uint32_t i = 0; i < 200; i++) { + asm("NOP"); + } + + // Perform USB peripheral reset + FSDEV_REG->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; + for (volatile uint32_t i = 0; i < 200; i++) { + asm("NOP"); + } + + FSDEV_REG->CNTR &= ~USB_CNTR_PDWN; + + // Wait startup time + for (volatile uint32_t i = 0; i < 200; i++) { + asm("NOP"); + } + + FSDEV_REG->CNTR = USB_CNTR_HOST; // Enable USB in Host mode + +#if !defined(FSDEV_BUS_32BIT) + // BTABLE register does not exist on 32-bit bus devices + FSDEV_REG->BTABLE = FSDEV_BTABLE_BASE; +#endif + + FSDEV_REG->ISTR = 0; // Clear pending interrupts + + // Reset channels to disabled + for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { + ch_write(i, 0u, false); + } + + tu_memclr(&_hcd_data, sizeof(_hcd_data)); + + // Enable interrupts for host mode + FSDEV_REG->CNTR |= USB_CNTR_RESETM | USB_CNTR_CTRM | USB_CNTR_SUSPM | + USB_CNTR_WKUPM | USB_CNTR_ERRM | USB_CNTR_PMAOVRM; + + // Initialize port state + _hcd_port.connected = false; + + fsdev_connect(rhport); + + return true; +} + +static void port_status_handler(uint8_t rhport, bool in_isr) { + uint32_t const fnr_reg = FSDEV_REG->FNR; + uint32_t const istr_reg = FSDEV_REG->ISTR; + // SE0 detected USB Disconnected state + if ((fnr_reg & (USB_FNR_RXDP | USB_FNR_RXDM)) == 0U) { + _hcd_port.connected = false; + hcd_event_device_remove(rhport, in_isr); + return; + } + + if (!_hcd_port.connected) { + // J-state or K-state detected & LastState=Disconnected + if (((fnr_reg & USB_FNR_RXDP) != 0U) || ((istr_reg & USB_ISTR_LS_DCONN) != 0U)) { + _hcd_port.connected = true; + hcd_event_device_attach(rhport, in_isr); + } + } else { + // J-state or K-state detected & lastState=Connected: a Missed disconnection is detected + if (((fnr_reg & USB_FNR_RXDP) != 0U) || ((istr_reg & USB_ISTR_LS_DCONN) != 0U)) { + _hcd_port.connected = false; + hcd_event_device_remove(rhport, in_isr); + } + } +} + +// Handle CTR interrupt for the TX/OUT direction +static void handle_ctr_tx(uint32_t ch_id) { + uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; + + uint8_t const ep_num = ch_reg & USB_EPADDR_FIELD; + uint8_t const daddr = (ch_reg & USB_CHEP_DEVADDR_Msk) >> USB_CHEP_DEVADDR_Pos; + + uint8_t ep_id = endpoint_find(daddr, ep_num); + TU_VERIFY(ep_id != TUSB_INDEX_INVALID_8, ); + + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + TU_VERIFY(xfer->allocated[TUSB_DIR_OUT],); + + // Manage Correct Transaction + if ((ch_reg & USB_CH_ERRTX) == 0U) { + // Acked + if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_ACK_SBUF) { + if (edpt->buflen != xfer->queued_len[TUSB_DIR_OUT]) { + uint16_t const len = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); + uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_TX); + hcd_write_packet_memory(pma_addr, &(edpt->buffer[xfer->queued_len[TUSB_DIR_OUT]]), len); + btable_set_count(ch_id, BTABLE_BUF_TX, len); + xfer->queued_len[TUSB_DIR_OUT] += len; + + ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_VALID); + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // only change TX Status, reserve other toggle bits + ch_write(ch_id, ch_reg, false); + } else { + channel_dealloc(xfer, TUSB_DIR_OUT); + hcd_event_xfer_complete(daddr, ep_num, xfer->queued_len[TUSB_DIR_OUT], XFER_RESULT_SUCCESS, true); + } + } else if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_NAK) { + // NAKed + if (edpt->ep_type != TUSB_XFER_INTERRUPT) { + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // will change TX Status, reserved other toggle bits + ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_VALID); + ch_write(ch_id, ch_reg, false); + } + } else if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_STALL) { + // STALLed + channel_dealloc(xfer, TUSB_DIR_OUT); + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // will change TX Status, reserved other toggle bits + ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_DISABLED); + ch_write(ch_id, ch_reg, false); + hcd_event_xfer_complete(daddr, ep_num, xfer->queued_len[TUSB_DIR_OUT], XFER_RESULT_STALLED, true); + } + } else { + // Error + TU_LOG(FSDEV_DEBUG, "handle_ctr_tx error epreg=0x%08X ch=%u ep=0x%02X daddr=%u queued=%u/%u\r\n", + ch_reg, ch_id, ep_num, daddr, xfer->queued_len[TUSB_DIR_OUT], edpt->buflen); + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // will change TX Status, reserved other toggle bits + ch_reg &=~USB_CH_ERRTX; + if (xfer->retry[TUSB_DIR_OUT] < HCD_XFER_ERROR_MAX) { + // Retry + xfer->retry[TUSB_DIR_OUT]++; + } else { + // Failed after retries + channel_dealloc(xfer, TUSB_DIR_OUT); + ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_DISABLED); + hcd_event_xfer_complete(daddr, ep_num, xfer->queued_len[TUSB_DIR_OUT], XFER_RESULT_FAILED, true); + } + ch_write(ch_id, ch_reg, false); + } +} + +// Handle CTR interrupt for the RX/IN direction +static void handle_ctr_rx(uint32_t ch_id) { + uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; + uint8_t const ep_num = ch_reg & USB_EPADDR_FIELD; + + uint8_t const daddr = (ch_reg & USB_CHEP_DEVADDR_Msk) >> USB_CHEP_DEVADDR_Pos; + + uint8_t ep_id = endpoint_find(daddr, ep_num | TUSB_DIR_IN_MASK); + TU_VERIFY(ep_id != TUSB_INDEX_INVALID_8, ); + + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + TU_VERIFY(xfer->allocated[TUSB_DIR_IN],); + + // Manage Correct Transaction + if ((ch_reg & USB_CH_ERRRX) == 0U) { + // Acked + if ((ch_reg & USB_CH_RX_STRX) == USB_CH_RX_ACK_SBUF) { + uint16_t const rx_count = btable_get_count(ch_id, BTABLE_BUF_RX); + uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_RX); + + hcd_read_packet_memory(edpt->buffer + xfer->queued_len[TUSB_DIR_IN], pma_addr, rx_count); + xfer->queued_len[TUSB_DIR_IN] += rx_count; + + if ((rx_count < edpt->max_packet_size) || (xfer->queued_len[TUSB_DIR_IN] >= edpt->buflen)) { + // all bytes received or short packet + channel_dealloc(xfer, TUSB_DIR_IN); + hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, xfer->queued_len[TUSB_DIR_IN], XFER_RESULT_SUCCESS, true); + } else { + // Set endpoint active again for receiving more data. Note that isochronous endpoints stay active always + uint16_t const cnt = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_IN], edpt->max_packet_size); + btable_set_rx_bufsize(ch_id, BTABLE_BUF_RX, cnt); + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change RX Status, reserved other toggle bits + ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_VALID); + ch_write(ch_id, ch_reg, false); + } + } else if ((ch_reg & USB_CH_RX_STRX) == USB_CH_RX_NAK) { + // NAKed + if (edpt->ep_type != TUSB_XFER_INTERRUPT) { + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change TX Status, reserved other toggle bits + ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_VALID); + ch_write(ch_id, ch_reg, false); + } + } else { + // STALLed + channel_dealloc(xfer, TUSB_DIR_IN); + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change TX Status, reserved other toggle bits + ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_DISABLED); + ch_write(ch_id, ch_reg, false); + hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, xfer->queued_len[TUSB_DIR_IN], XFER_RESULT_STALLED, true); + } + } else { + // Error + TU_LOG(FSDEV_DEBUG, "handle_ctr_tx error epreg=0x%08X ch=%u ep=0x%02X daddr=%u queued=%u/%u\r\n", + ch_reg, ch_id, ep_num, daddr, xfer->queued_len[TUSB_DIR_IN], edpt->buflen); + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change RX Status, reserved other toggle bits + ch_reg &=~USB_CH_ERRRX; + if (xfer->retry[TUSB_DIR_IN] < HCD_XFER_ERROR_MAX) { + // Retry + xfer->retry[TUSB_DIR_IN]++; + } else { + // Failed after retries + channel_dealloc(xfer, TUSB_DIR_IN); + ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_DISABLED); + hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, xfer->queued_len[TUSB_DIR_IN], XFER_RESULT_FAILED, true); + } + ch_write(ch_id, ch_reg, false); + } +} + +// Interrupt Handler +void hcd_int_handler(uint8_t rhport, bool in_isr) { + uint32_t int_status = FSDEV_REG->ISTR; + + /* Port Change Detected (Connection/Disconnection) */ + if (int_status & USB_ISTR_DCON) { + FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_DCON; + port_status_handler(rhport, in_isr); + } + + // Handle transfer complete (CTR) + while (FSDEV_REG->ISTR & USB_ISTR_CTR) { + uint32_t const ch_id = FSDEV_REG->ISTR & USB_ISTR_EP_ID; + uint32_t const ch_reg = ch_read(ch_id); + + if (ch_reg & USB_EP_CTR_RX) { + #ifdef FSDEV_BUS_32BIT + /* https://www.st.com/resource/en/errata_sheet/es0561-stm32h503cbebkbrb-device-errata-stmicroelectronics.pdf + * https://www.st.com/resource/en/errata_sheet/es0587-stm32u535xx-and-stm32u545xx-device-errata-stmicroelectronics.pdf + * From H503/U535 errata: Buffer description table update completes after CTR interrupt triggers + * Description: + * - During OUT transfers, the correct transfer interrupt (CTR) is triggered a little before the last USB SRAM accesses + * have completed. If the software responds quickly to the interrupt, the full buffer contents may not be correct. + * Workaround: + * - Software should ensure that a small delay is included before accessing the SRAM contents. This delay + * should be 800 ns in Full Speed mode and 6.4 μs in Low Speed mode + * - Since H5 can run up to 250Mhz -> 1 cycle = 4ns. Per errata, we need to wait 200 cycles. Though executing code + * also takes time, so we'll wait 60 cycles (count = 20). + * - Since Low Speed mode is not supported/popular, we will ignore it for now. + * + * Note: this errata may also apply to G0, U5, H5 etc. + */ + volatile uint32_t cycle_count = 20; // defined as PCD_RX_PMA_CNT in stm32 hal_driver + while (cycle_count > 0U) { + cycle_count--; // each count take 3 cycles (1 for sub, jump, and compare) + } + #endif + + ch_write_clear_ctr(ch_id, TUSB_DIR_IN); + handle_ctr_rx(ch_id); + } + + if (ch_reg & USB_EP_CTR_TX) { + ch_write_clear_ctr(ch_id, TUSB_DIR_OUT); + handle_ctr_tx(ch_id); + } + } + + if (int_status & USB_ISTR_ERR) { + FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_ERR; + // TODO: Handle error + } + + if (int_status & USB_ISTR_PMAOVR) { + TU_BREAKPOINT(); + FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_PMAOVR; + } +} + +// Enable USB interrupt +void hcd_int_enable(uint8_t rhport) { + fsdev_int_enable(rhport); +} + +// Disable USB interrupt +void hcd_int_disable(uint8_t rhport) { + fsdev_int_disable(rhport); +} + +// Get frame number (1ms) +uint32_t hcd_frame_number(uint8_t rhport) { + (void) rhport; + return FSDEV_REG->FNR & USB_FNR_FN; +} + +//--------------------------------------------------------------------+ +// Port API +//--------------------------------------------------------------------+ + +// Get the current connect status of roothub port +bool hcd_port_connect_status(uint8_t rhport) { + (void) rhport; + return _hcd_port.connected; +} + +// Reset USB bus on the port +void hcd_port_reset(uint8_t rhport) { + (void) rhport; + FSDEV_REG->CNTR |= USB_CNTR_FRES; +} + +// Complete bus reset sequence +void hcd_port_reset_end(uint8_t rhport) { + (void) rhport; + FSDEV_REG->CNTR &= ~USB_CNTR_FRES; +} + +// Get port link speed +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { + (void) rhport; + if ((FSDEV_REG->ISTR & USB_ISTR_LS_DCONN) != 0U) { + return TUSB_SPEED_LOW; + } else { + return TUSB_SPEED_FULL; + } +} + +// HCD closes all opened endpoints belonging to this device +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { + (void) rhport; + + // Close all endpoints for this device + for(uint32_t i = 0; i < CFG_TUH_FSDEV_ENDPOINT_MAX; i++) { + hcd_endpoint_t* edpt = &_hcd_data.edpt[i]; + if (edpt->allocated && edpt->dev_addr == dev_addr) { + edpoint_close(i); + } + } + +} + +//--------------------------------------------------------------------+ +// Endpoints API +//--------------------------------------------------------------------+ + +// Open an endpoint +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const *ep_desc) { + (void) rhport; + + uint8_t const ep_addr = ep_desc->bEndpointAddress; + uint16_t const packet_size = tu_edpt_packet_size(ep_desc); + uint8_t const ep_type = ep_desc->bmAttributes.xfer; + + uint8_t const ep_id = endpoint_alloc(); + TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + edpt->dev_addr = dev_addr; + edpt->ep_addr = ep_addr; + edpt->ep_type = ep_type; + edpt->max_packet_size = packet_size; + edpt->interval = ep_desc->bInterval; + edpt->low_speed = (hcd_port_speed_get(rhport) == TUSB_SPEED_FULL && tuh_speed_get(dev_addr) == TUSB_SPEED_LOW); + + // EP0 is bi-directional, so we need to open both OUT and IN channels + if (ep_addr == 0) { + uint8_t const ep_id_in = endpoint_alloc(); + TU_ASSERT(ep_id_in < CFG_TUH_FSDEV_ENDPOINT_MAX); + + _hcd_data.edpt[ep_id_in] = *edpt; // copy from OUT endpoint + _hcd_data.edpt[ep_id_in].ep_addr = 0 | TUSB_DIR_IN_MASK; + } + + return true; +} + +bool hcd_edpt_close(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + + uint8_t const ep_id = endpoint_find(dev_addr, ep_addr); + TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + + edpoint_close(ep_id); + + if (ep_addr == 0) { + uint8_t const ep_id_in = endpoint_find(dev_addr, 0 | TUSB_DIR_IN_MASK); + TU_ASSERT(ep_id_in < CFG_TUH_FSDEV_ENDPOINT_MAX); + + edpoint_close(ep_id_in); + } + + return false; +} + +// Submit a transfer +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) { + (void) rhport; + + TU_LOG(FSDEV_DEBUG, "hcd_edpt_xfer addr=%u ep=0x%02X len=%u\r\n", dev_addr, ep_addr, buflen); + + uint8_t const ep_id = endpoint_find(dev_addr, ep_addr); + TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + + hcd_endpoint_t *edpt = &_hcd_data.edpt[ep_id]; + + edpt->buffer = buffer; + edpt->buflen = buflen; + + return edpt_xfer_kickoff(ep_id); +} + +// Abort a queued transfer +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + + uint8_t const ep_id = endpoint_find(dev_addr, ep_addr); + TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); + + for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { + hcd_xfer_t* xfer = &_hcd_data.xfer[i]; + + if (xfer->allocated[dir] && + xfer->dev_addr == dev_addr && + xfer->ep_num == tu_edpt_number(ep_addr)) { + + channel_dealloc(xfer, dir); + + uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; // reserve CTR bits + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(dir); // will change Status, reserved other toggle bits + ch_change_status(&ch_reg, dir, EP_STAT_DISABLED); + ch_write(i, ch_reg, true); + + } + } + + return true; +} + +// Submit a special transfer to send 8-byte Setup Packet +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { + (void) rhport; + + uint8_t const ep_id = endpoint_find(dev_addr, 0); + TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + + hcd_endpoint_t *edpt = &_hcd_data.edpt[ep_id]; + edpt->next_setup = true; + + return hcd_edpt_xfer(rhport, dev_addr, 0, (uint8_t*)(uintptr_t) setup_packet, 8); +} + +// Clear stall, data toggle is also reset to DATA0 +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return true; +} + +//--------------------------------------------------------------------+ +// Helper Functions +//--------------------------------------------------------------------+ + +static uint8_t endpoint_alloc(void) { + for (uint32_t i = 0; i < CFG_TUH_FSDEV_ENDPOINT_MAX; i++) { + hcd_endpoint_t* edpt = &_hcd_data.edpt[i]; + if (!edpt->allocated) { + edpt->allocated = true; + return i; + } + } + return TUSB_INDEX_INVALID_8; +} + +static uint8_t endpoint_find(uint8_t dev_addr, uint8_t ep_addr) { + for (uint32_t i = 0; i < (uint32_t)CFG_TUH_FSDEV_ENDPOINT_MAX; i++) { + hcd_endpoint_t* edpt = &_hcd_data.edpt[i]; + if (edpt->allocated && edpt->dev_addr == dev_addr && edpt->ep_addr == ep_addr) { + return i; + } + } + return TUSB_INDEX_INVALID_8; +} + +// close an opened endpoint +static void edpoint_close(uint8_t ep_id) { + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + endpoint_dealloc(edpt); + + // disable active channel belong to this endpoint + for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { + hcd_xfer_t* xfer = &_hcd_data.xfer[i]; + + if (xfer->allocated[TUSB_DIR_OUT] && xfer->edpt[TUSB_DIR_OUT] == edpt) { + channel_dealloc(xfer, TUSB_DIR_OUT); + + uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; // reserve CTR bits + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // will change RX Status, reserved other toggle bits + ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_DISABLED); + ch_write(i, ch_reg, true); + + } + if (xfer->allocated[TUSB_DIR_IN] && xfer->edpt[TUSB_DIR_IN] == edpt) { + channel_dealloc(xfer, TUSB_DIR_IN); + + uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; // reserve CTR bits + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change TX Status, reserved other toggle bits + ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_DISABLED); + ch_write(i, ch_reg, true); + + } + } +} + +// Allocate PMA buffer +static uint32_t hcd_pma_alloc(uint8_t channel, tusb_dir_t dir, uint16_t len) { + (void) len; + // Simple static allocation as we are unlikely to handle ISO endpoints in host mode + // We just give each channel a buffer of max packet size (64 bytes) + + uint16_t addr = FSDEV_BTABLE_BASE + 8 * FSDEV_EP_COUNT; + addr += channel * 64 * 2 + (dir == TUSB_DIR_IN ? 64 : 0); + + TU_ASSERT(addr <= FSDEV_PMA_SIZE, 0xFFFF); + + return addr; +} + +// Allocate hardware channel +static uint8_t channel_alloc(uint8_t dev_addr, uint8_t ep_addr, uint8_t ep_type) { + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); + + // Find channel allocate for same ep_num but other direction + tusb_dir_t const other_dir = (dir == TUSB_DIR_IN) ? TUSB_DIR_OUT : TUSB_DIR_IN; + for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { + if (!_hcd_data.xfer[i].allocated[dir] && + _hcd_data.xfer[i].allocated[other_dir] && + _hcd_data.xfer[i].dev_addr == dev_addr && + _hcd_data.xfer[i].ep_num == ep_num && + _hcd_data.xfer[i].ep_type == ep_type) { + _hcd_data.xfer[i].allocated[dir] = true; + _hcd_data.xfer[i].queued_len[dir] = 0; + _hcd_data.xfer[i].retry[dir] = 0; + return i; + } + } + + // Find free channel + for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { + if (!_hcd_data.xfer[i].allocated[0] && !_hcd_data.xfer[i].allocated[1]) { + _hcd_data.xfer[i].dev_addr = dev_addr; + _hcd_data.xfer[i].ep_num = ep_num; + _hcd_data.xfer[i].ep_type = ep_type; + _hcd_data.xfer[i].allocated[dir] = true; + _hcd_data.xfer[i].queued_len[dir] = 0; + _hcd_data.xfer[i].retry[dir] = 0; + return i; + } + } + + // Allocation failed + return TUSB_INDEX_INVALID_8; +} + +// kick-off transfer with an endpoint +static bool edpt_xfer_kickoff(uint8_t ep_id) { + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; + uint8_t ch_id = channel_alloc(edpt->dev_addr, edpt->ep_addr, edpt->ep_type); + TU_ASSERT(ch_id != TUSB_INDEX_INVALID_8); // all channel are in used + + tusb_dir_t const dir = tu_edpt_dir(edpt->ep_addr); + + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + xfer->edpt[dir] = edpt; + + return channel_xfer_start(ch_id, dir); +} + +static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir) { + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + hcd_endpoint_t* edpt = xfer->edpt[dir]; + + uint32_t ch_reg = ch_read(ch_id) & ~USB_EPREG_MASK; + ch_reg |= tu_edpt_number(edpt->ep_addr) | edpt->dev_addr << USB_CHEP_DEVADDR_Pos | + USB_EP_CTR_TX | USB_EP_CTR_RX; + + // Set type + switch (edpt->ep_type) { + case TUSB_XFER_BULK: + ch_reg |= USB_EP_BULK; + break; + case TUSB_XFER_INTERRUPT: + ch_reg |= USB_EP_INTERRUPT; + break; + + case TUSB_XFER_CONTROL: + ch_reg |= USB_EP_CONTROL; + break; + + default: + // Note: ISO endpoint is unsupported + TU_ASSERT(false); + } + + /* Create a packet memory buffer area. */ + uint16_t pma_addr = hcd_pma_alloc(ch_id, dir, edpt->max_packet_size); + btable_set_addr(ch_id, dir == TUSB_DIR_OUT ? BTABLE_BUF_TX : BTABLE_BUF_RX, pma_addr); + + if (dir == TUSB_DIR_OUT) { + uint16_t const len = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); + + hcd_write_packet_memory(pma_addr, &(edpt->buffer[xfer->queued_len[TUSB_DIR_OUT]]), len); + btable_set_count(ch_id, BTABLE_BUF_TX, len); + + xfer->queued_len[TUSB_DIR_OUT] += len; + if (edpt->next_setup) { + // Setup packet uses IN token + edpt->next_setup = false; + ch_reg |= USB_EP_SETUP; + } + + ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_VALID); + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // only change TX Status, reserve other toggle bits + + } else { + btable_set_rx_bufsize(ch_id, BTABLE_BUF_RX, edpt->max_packet_size); + ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_VALID); + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change RX Status, reserved other toggle bits + } + + ch_write(ch_id, ch_reg, true); + + return true; +} + +//--------------------------------------------------------------------+ +// PMA read/write +//--------------------------------------------------------------------+ + +// Write to packet memory area (PMA) from user memory +static bool hcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes) { + if (nbytes == 0) return true; + uint32_t n_write = nbytes / FSDEV_BUS_SIZE; + + fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(dst); + const uint8_t *src8 = src; + + while (n_write--) { + pma_buf->value = fsdevbus_unaligned_read(src8); + src8 += FSDEV_BUS_SIZE; + pma_buf++; + } + + // Handle odd bytes + uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); + if (odd) { + fsdev_bus_t temp = 0; + for (uint16_t i = 0; i < odd; i++) { + temp |= *src8++ << (i * 8); + } + pma_buf->value = temp; + } + + return true; +} + +// Read from packet memory area (PMA) to user memory +static bool hcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes) { + if (nbytes == 0) return true; + uint32_t n_read = nbytes / FSDEV_BUS_SIZE; + + fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(src); + uint8_t *dst8 = (uint8_t *)dst; + + while (n_read--) { + fsdevbus_unaligned_write(dst8, (fsdev_bus_t) pma_buf->value); + dst8 += FSDEV_BUS_SIZE; + pma_buf++; + } + + // Handle odd bytes + uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); + if (odd) { + fsdev_bus_t temp = pma_buf->value; + while (odd--) { + *dst8++ = (uint8_t)(temp & 0xfful); + temp >>= 8; + } + } + + return true; +} + +#endif -- cgit v1.3.1 From 03bd8c26d6b72b5e53c0d4b9787a6396ee295927 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 24 Nov 2025 21:03:04 +0100 Subject: fsdev: reorganize functions Signed-off-by: HiFiPhile --- examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/cdc_msc_hid_freertos/only.txt | 1 + hw/bsp/at32f403a_407/family.cmake | 1 + hw/bsp/at32f403a_407/family.mk | 1 + hw/bsp/at32f413/family.cmake | 1 + hw/bsp/at32f413/family.mk | 1 + hw/bsp/ch32v20x/family.cmake | 1 + hw/bsp/ch32v20x/family.mk | 1 + hw/bsp/stm32c0/family.cmake | 1 + hw/bsp/stm32c0/family.mk | 1 + hw/bsp/stm32f0/family.cmake | 1 + hw/bsp/stm32f0/family.mk | 1 + hw/bsp/stm32f1/family.cmake | 1 + hw/bsp/stm32f1/family.mk | 1 + hw/bsp/stm32f3/family.cmake | 1 + hw/bsp/stm32f3/family.mk | 1 + hw/bsp/stm32g0/family.cmake | 1 + hw/bsp/stm32g0/family.mk | 2 + hw/bsp/stm32g4/family.cmake | 1 + hw/bsp/stm32g4/family.mk | 1 + hw/bsp/stm32h5/family.cmake | 1 + hw/bsp/stm32h5/family.mk | 2 + hw/bsp/stm32l0/family.cmake | 1 + hw/bsp/stm32l0/family.mk | 1 + hw/bsp/stm32l4/family.cmake | 1 + hw/bsp/stm32l4/family.mk | 1 + hw/bsp/stm32u0/family.cmake | 1 + hw/bsp/stm32u0/family.mk | 1 + hw/bsp/stm32u5/family.cmake | 2 + hw/bsp/stm32u5/family.mk | 6 +- hw/bsp/stm32wb/family.cmake | 1 + hw/bsp/stm32wb/family.mk | 1 + lib/rt-thread/SConscript | 3 +- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 190 +----------- src/portable/st/stm32_fsdev/fsdev_at32.h | 10 +- src/portable/st/stm32_fsdev/fsdev_ch32.h | 10 +- src/portable/st/stm32_fsdev/fsdev_common.c | 241 +++++++++++++++ src/portable/st/stm32_fsdev/fsdev_common.h | 343 +++++++++++++++++++++ src/portable/st/stm32_fsdev/fsdev_stm32.h | 14 +- src/portable/st/stm32_fsdev/fsdev_type.h | 344 --------------------- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 412 ++++++++++++-------------- tools/iar_template.ipcf | 4 +- 43 files changed, 838 insertions(+), 774 deletions(-) create mode 100644 src/portable/st/stm32_fsdev/fsdev_common.c create mode 100644 src/portable/st/stm32_fsdev/fsdev_common.h delete mode 100644 src/portable/st/stm32_fsdev/fsdev_type.h diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index cba58f8e8..a7bebf1d9 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -13,6 +13,7 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index cba58f8e8..a7bebf1d9 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -13,6 +13,7 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index ef0a1ac96..8da7a47d6 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -9,6 +9,7 @@ mcu:MIMXRT11XX mcu:MSP432E4 mcu:RX65X mcu:MAX3421 +mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 diff --git a/hw/bsp/at32f403a_407/family.cmake b/hw/bsp/at32f403a_407/family.cmake index 498b89c1a..7aaa9ede8 100644 --- a/hw/bsp/at32f403a_407/family.cmake +++ b/hw/bsp/at32f403a_407/family.cmake @@ -61,6 +61,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/at32f403a_407/family.mk b/hw/bsp/at32f403a_407/family.mk index c82d402ca..f458881a3 100644 --- a/hw/bsp/at32f403a_407/family.mk +++ b/hw/bsp/at32f403a_407/family.mk @@ -16,6 +16,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \ diff --git a/hw/bsp/at32f413/family.cmake b/hw/bsp/at32f413/family.cmake index 02692daf5..33718bd1c 100644 --- a/hw/bsp/at32f413/family.cmake +++ b/hw/bsp/at32f413/family.cmake @@ -61,6 +61,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/at32f413/family.mk b/hw/bsp/at32f413/family.mk index 9c5d867de..abcd15d11 100644 --- a/hw/bsp/at32f413/family.mk +++ b/hw/bsp/at32f413/family.mk @@ -16,6 +16,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \ diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index d8c7c5327..59a96f70d 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -93,6 +93,7 @@ function(family_configure_example TARGET RTOS) ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ${TOP}/src/portable/wch/hcd_ch32_usbfs.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 16fc537ac..7042ecbb7 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -47,6 +47,7 @@ SRC_C += \ src/portable/wch/dcd_ch32_usbfs.c \ src/portable/wch/hcd_ch32_usbfs.c \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(SDK_SRC_DIR)/Core/core_riscv.c \ $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_gpio.c \ $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_misc.c \ diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index 6e04b20f4..dc1a2bb13 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -67,6 +67,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) diff --git a/hw/bsp/stm32c0/family.mk b/hw/bsp/stm32c0/family.mk index fd03ad537..71209bf2e 100644 --- a/hw/bsp/stm32c0/family.mk +++ b/hw/bsp/stm32c0/family.mk @@ -30,6 +30,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index ee73ae872..a926a9739 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -65,6 +65,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32f0/family.mk b/hw/bsp/stm32f0/family.mk index 9b8305874..b5efdcb8d 100644 --- a/hw/bsp/stm32f0/family.mk +++ b/hw/bsp/stm32f0/family.mk @@ -30,6 +30,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 064f32096..9e94d86c6 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -62,6 +62,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32f1/family.mk b/hw/bsp/stm32f1/family.mk index ca95f2315..d4b6dfa6c 100644 --- a/hw/bsp/stm32f1/family.mk +++ b/hw/bsp/stm32f1/family.mk @@ -27,6 +27,7 @@ LDFLAGS_GCC += \ # ------------------------ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ ${ST_CMSIS}/Source/Templates/system_stm32${ST_FAMILY}xx.c \ ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal.c \ ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal_cortex.c \ diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index 7c9e97e62..3cbb4e1cd 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -62,6 +62,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32f3/family.mk b/hw/bsp/stm32f3/family.mk index 13734583a..eb4a4e186 100644 --- a/hw/bsp/stm32f3/family.mk +++ b/hw/bsp/stm32f3/family.mk @@ -19,6 +19,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 572f0e644..0ce85168e 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -64,6 +64,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) diff --git a/hw/bsp/stm32g0/family.mk b/hw/bsp/stm32g0/family.mk index d735ca92d..e376f7f06 100644 --- a/hw/bsp/stm32g0/family.mk +++ b/hw/bsp/stm32g0/family.mk @@ -29,6 +29,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 7e8b319b8..85201ce61 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -62,6 +62,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) diff --git a/hw/bsp/stm32g4/family.mk b/hw/bsp/stm32g4/family.mk index 0abd73532..a153194ce 100644 --- a/hw/bsp/stm32g4/family.mk +++ b/hw/bsp/stm32g4/family.mk @@ -29,6 +29,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ src/portable/st/typec/typec_stm32.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index 6e63c4072..d6f356ddf 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -66,6 +66,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) diff --git a/hw/bsp/stm32h5/family.mk b/hw/bsp/stm32h5/family.mk index 792edb2bb..ec5f82d61 100644 --- a/hw/bsp/stm32h5/family.mk +++ b/hw/bsp/stm32h5/family.mk @@ -36,6 +36,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index b6b0139a0..3f6622f71 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -66,6 +66,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32l0/family.mk b/hw/bsp/stm32l0/family.mk index 921b1b413..0ae881fdf 100644 --- a/hw/bsp/stm32l0/family.mk +++ b/hw/bsp/stm32l0/family.mk @@ -27,6 +27,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 5bc28dd5d..b1659d47a 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -67,6 +67,7 @@ function(family_configure_example TARGET RTOS) ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32l4/family.mk b/hw/bsp/stm32l4/family.mk index 01d059236..fd11fd226 100644 --- a/hw/bsp/stm32l4/family.mk +++ b/hw/bsp/stm32l4/family.mk @@ -34,6 +34,7 @@ SRC_C += \ src/portable/synopsys/dwc2/hcd_dwc2.c \ src/portable/synopsys/dwc2/dwc2_common.c \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32u0/family.cmake b/hw/bsp/stm32u0/family.cmake index 4f9b03109..2d3819cba 100644 --- a/hw/bsp/stm32u0/family.cmake +++ b/hw/bsp/stm32u0/family.cmake @@ -67,6 +67,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32u0/family.mk b/hw/bsp/stm32u0/family.mk index d5a850050..5f25906d3 100644 --- a/hw/bsp/stm32u0/family.mk +++ b/hw/bsp/stm32u0/family.mk @@ -27,6 +27,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 70e0c313c..58dc63ae3 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -66,6 +66,8 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 3694b1ca0..79f181a68 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -39,10 +39,12 @@ SRC_C += \ ifeq ($(MCU_VARIANT),stm32u545xx) SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c else ifeq ($(MCU_VARIANT),stm32u535xx) SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c else SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index 1a96e3d7e..6703a9b19 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -67,6 +67,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk index a80ff6f5b..0b1a51cec 100644 --- a/hw/bsp/stm32wb/family.mk +++ b/hw/bsp/stm32wb/family.mk @@ -20,6 +20,7 @@ LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ diff --git a/lib/rt-thread/SConscript b/lib/rt-thread/SConscript index 99517a090..e7b6f2dc4 100644 --- a/lib/rt-thread/SConscript +++ b/lib/rt-thread/SConscript @@ -18,7 +18,8 @@ if GetDepend(["PKG_TINYUSB_DEVICE_ENABLE"]): # BSP if GetDepend(["SOC_FAMILY_STM32"]): src += ["../../src/portable/synopsys/dwc2/dcd_dwc2.c", - "../../src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c"] + "../../src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c", + "../../src/portable/st/stm32_fsdev/fsdev_common.c"] if GetDepend(["SOC_NRF52840"]): src += ["../../src/portable/nordic/nrf5x/dcd_nrf5x.c"] diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index db1a5784a..3762b33f9 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -112,16 +112,7 @@ !(defined(TUP_USBIP_FSDEV_CH32) && CFG_TUD_WCH_USBIP_FSDEV == 0) #include "device/dcd.h" - -#if defined(TUP_USBIP_FSDEV_STM32) - #include "fsdev_stm32.h" -#elif defined(TUP_USBIP_FSDEV_CH32) - #include "fsdev_ch32.h" -#elif defined(TUP_USBIP_FSDEV_AT32) - #include "fsdev_at32.h" -#else - #error "Unknown USB IP" -#endif +#include "fsdev_common.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF @@ -162,11 +153,6 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, tusb_dir_t dir); static uint16_t ep_buf_ptr; ///< Points to first free memory location static uint32_t dcd_pma_alloc(uint16_t len, bool dbuf); static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type); -static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes); -static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes); - -static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes); -static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes); static void edpt0_open(uint8_t rhport); @@ -307,7 +293,7 @@ static void handle_ctr_setup(uint32_t ep_id) { uint16_t rx_addr = btable_get_addr(ep_id, BTABLE_BUF_RX); uint8_t setup_packet[8] TU_ATTR_ALIGNED(4); - dcd_read_packet_memory(setup_packet, rx_addr, rx_count); + fsdev_read_packet_memory(setup_packet, rx_addr, rx_count); // Clear CTR RX if another setup packet arrived before this, it will be discarded ep_write_clear_ctr(ep_id, TUSB_DIR_OUT); @@ -345,9 +331,9 @@ static void handle_ctr_rx(uint32_t ep_id) { uint16_t pma_addr = (uint16_t) btable_get_addr(ep_id, buf_id); if (xfer->ff) { - dcd_read_packet_memory_ff(xfer->ff, pma_addr, rx_count); + fsdev_read_packet_memory_ff(xfer->ff, pma_addr, rx_count); } else { - dcd_read_packet_memory(xfer->buffer + xfer->queued_len, pma_addr, rx_count); + fsdev_read_packet_memory(xfer->buffer + xfer->queued_len, pma_addr, rx_count); } xfer->queued_len += rx_count; @@ -742,9 +728,9 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { uint16_t addr_ptr = (uint16_t) btable_get_addr(ep_ix, buf_id); if (xfer->ff) { - dcd_write_packet_memory_ff(xfer->ff, addr_ptr, len); + fsdev_write_packet_memory_ff(xfer->ff, addr_ptr, len); } else { - dcd_write_packet_memory(addr_ptr, &(xfer->buffer[xfer->queued_len]), len); + fsdev_write_packet_memory(addr_ptr, &(xfer->buffer[xfer->queued_len]), len); } xfer->queued_len += len; @@ -864,168 +850,4 @@ void dcd_disconnect(uint8_t rhport) { } #endif -//--------------------------------------------------------------------+ -// PMA read/write -//--------------------------------------------------------------------+ - -// Write to packet memory area (PMA) from user memory -// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT -// - Uses unaligned for RAM (since M0 cannot access unaligned address) -static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes) { - if (nbytes == 0) return true; - uint32_t n_write = nbytes / FSDEV_BUS_SIZE; - - fsdev_pma_buf_t* pma_buf = PMA_BUF_AT(dst); - const uint8_t *src8 = src; - - while (n_write--) { - pma_buf->value = fsdevbus_unaligned_read(src8); - src8 += FSDEV_BUS_SIZE; - pma_buf++; - } - - // odd bytes e.g 1 for 16-bit or 1-3 for 32-bit - uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); - if (odd) { - fsdev_bus_t temp = 0; - for(uint16_t i = 0; i < odd; i++) { - temp |= *src8++ << (i * 8); - } - pma_buf->value = temp; - } - - return true; -} - -// Read from packet memory area (PMA) to user memory. -// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT -// - Uses unaligned for RAM (since M0 cannot access unaligned address) -static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes) { - if (nbytes == 0) return true; - uint32_t n_read = nbytes / FSDEV_BUS_SIZE; - - fsdev_pma_buf_t* pma_buf = PMA_BUF_AT(src); - uint8_t *dst8 = (uint8_t *)dst; - - while (n_read--) { - fsdevbus_unaligned_write(dst8, (fsdev_bus_t ) pma_buf->value); - dst8 += FSDEV_BUS_SIZE; - pma_buf++; - } - - // odd bytes e.g 1 for 16-bit or 1-3 for 32-bit - uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); - if (odd) { - fsdev_bus_t temp = pma_buf->value; - while (odd--) { - *dst8++ = (uint8_t) (temp & 0xfful); - temp >>= 8; - } - } - - return true; -} - -// Write to PMA from FIFO -static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes) { - if (wNBytes == 0) return true; - - // Since we copy from a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies - tu_fifo_buffer_info_t info; - tu_fifo_get_read_info(ff, &info); - - uint16_t cnt_lin = tu_min16(wNBytes, info.len_lin); - uint16_t cnt_wrap = tu_min16(wNBytes - cnt_lin, info.len_wrap); - uint16_t const cnt_total = cnt_lin + cnt_wrap; - - // We want to read from the FIFO and write it into the PMA, if LIN part is ODD and has WRAPPED part, - // last lin byte will be combined with wrapped part To ensure PMA is always access aligned - uint16_t lin_even = cnt_lin & ~(FSDEV_BUS_SIZE - 1); - uint16_t lin_odd = cnt_lin & (FSDEV_BUS_SIZE - 1); - uint8_t const *src8 = (uint8_t const*) info.ptr_lin; - - // write even linear part - dcd_write_packet_memory(dst, src8, lin_even); - dst += lin_even; - src8 += lin_even; - - if (lin_odd == 0) { - src8 = (uint8_t const*) info.ptr_wrap; - } else { - // Combine last linear bytes + first wrapped bytes to form fsdev bus width data - fsdev_bus_t temp = 0; - uint16_t i; - for(i = 0; i < lin_odd; i++) { - temp |= *src8++ << (i * 8); - } - - src8 = (uint8_t const*) info.ptr_wrap; - for(; i < FSDEV_BUS_SIZE && cnt_wrap > 0; i++, cnt_wrap--) { - temp |= *src8++ << (i * 8); - } - - dcd_write_packet_memory(dst, &temp, FSDEV_BUS_SIZE); - dst += FSDEV_BUS_SIZE; - } - - // write the rest of the wrapped part - dcd_write_packet_memory(dst, src8, cnt_wrap); - - tu_fifo_advance_read_pointer(ff, cnt_total); - return true; -} - -// Read from PMA to FIFO -static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes) { - if (wNBytes == 0) return true; - - // Since we copy into a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies - // Check for first linear part - tu_fifo_buffer_info_t info; - tu_fifo_get_write_info(ff, &info); // We want to read from the FIFO - - uint16_t cnt_lin = tu_min16(wNBytes, info.len_lin); - uint16_t cnt_wrap = tu_min16(wNBytes - cnt_lin, info.len_wrap); - uint16_t cnt_total = cnt_lin + cnt_wrap; - - // We want to read from the FIFO and write it into the PMA, if LIN part is ODD and has WRAPPED part, - // last lin byte will be combined with wrapped part To ensure PMA is always access aligned - - uint16_t lin_even = cnt_lin & ~(FSDEV_BUS_SIZE - 1); - uint16_t lin_odd = cnt_lin & (FSDEV_BUS_SIZE - 1); - uint8_t *dst8 = (uint8_t *) info.ptr_lin; - - // read even linear part - dcd_read_packet_memory(dst8, src, lin_even); - dst8 += lin_even; - src += lin_even; - - if (lin_odd == 0) { - dst8 = (uint8_t *) info.ptr_wrap; - } else { - // Combine last linear bytes + first wrapped bytes to form fsdev bus width data - fsdev_bus_t temp; - dcd_read_packet_memory(&temp, src, FSDEV_BUS_SIZE); - src += FSDEV_BUS_SIZE; - - uint16_t i; - for (i = 0; i < lin_odd; i++) { - *dst8++ = (uint8_t) (temp & 0xfful); - temp >>= 8; - } - - dst8 = (uint8_t *) info.ptr_wrap; - for (; i < FSDEV_BUS_SIZE && cnt_wrap > 0; i++, cnt_wrap--) { - *dst8++ = (uint8_t) (temp & 0xfful); - temp >>= 8; - } - } - - // read the rest of the wrapped part - dcd_read_packet_memory(dst8, src, cnt_wrap); - - tu_fifo_advance_write_pointer(ff, cnt_total); - return true; -} - #endif diff --git a/src/portable/st/stm32_fsdev/fsdev_at32.h b/src/portable/st/stm32_fsdev/fsdev_at32.h index 03490ee24..6877dc131 100644 --- a/src/portable/st/stm32_fsdev/fsdev_at32.h +++ b/src/portable/st/stm32_fsdev/fsdev_at32.h @@ -150,8 +150,6 @@ #define USB_EPRX_DTOG2 ((uint16_t)0x2000U) /*!< EndPoint RX Data TOGgle bit1 */ #define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK) -#include "fsdev_type.h" - //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ @@ -168,7 +166,7 @@ enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; #error "Unsupported MCU" #endif -void fsdev_int_enable(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_int_enable(uint8_t rhport) { (void)rhport; #if (CFG_TUSB_MCU == OPT_MCU_AT32F403A_407) || (CFG_TUSB_MCU == OPT_MCU_AT32F413) // AT32F403A/407 devices allow to remap the USB interrupt vectors from @@ -187,7 +185,7 @@ void fsdev_int_enable(uint8_t rhport) { } } -void fsdev_int_disable(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_int_disable(uint8_t rhport) { (void)rhport; #if (CFG_TUSB_MCU == OPT_MCU_AT32F403A_407) || (CFG_TUSB_MCU == OPT_MCU_AT32F413) // AT32F403A/407 devices allow to remap the USB interrupt vectors from @@ -206,7 +204,7 @@ void fsdev_int_disable(uint8_t rhport) { } } -void fsdev_disconnect(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_disconnect(uint8_t rhport) { (void) rhport; /* disable usb phy */ *(volatile uint32_t*)(FSDEV_REG_BASE + 0x40) |= USB_CNTR_PDWN; @@ -214,7 +212,7 @@ void fsdev_disconnect(uint8_t rhport) { *(volatile uint32_t *)(FSDEV_REG_BASE+0x60) |= (1u<<1); } -void fsdev_connect(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_connect(uint8_t rhport) { (void) rhport; /* enable usb phy */ *(volatile uint32_t*)(FSDEV_REG_BASE + 0x40) &= ~USB_CNTR_PDWN; diff --git a/src/portable/st/stm32_fsdev/fsdev_ch32.h b/src/portable/st/stm32_fsdev/fsdev_ch32.h index 547f3bd1b..ee0057cb4 100644 --- a/src/portable/st/stm32_fsdev/fsdev_ch32.h +++ b/src/portable/st/stm32_fsdev/fsdev_ch32.h @@ -168,8 +168,6 @@ #define USB_EPRX_DTOG2 ((uint16_t)0x2000U) /*!< EndPoint RX Data TOGgle bit1 */ #define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK) -#include "fsdev_type.h" - //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ @@ -185,26 +183,26 @@ enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; #error "Unsupported MCU" #endif -void fsdev_int_enable(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_int_enable(uint8_t rhport) { (void)rhport; for(uint8_t i=0; i < FSDEV_IRQ_NUM; i++) { NVIC_EnableIRQ(fsdev_irq[i]); } } -void fsdev_int_disable(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_int_disable(uint8_t rhport) { (void)rhport; for(uint8_t i=0; i < FSDEV_IRQ_NUM; i++) { NVIC_DisableIRQ(fsdev_irq[i]); } } -void fsdev_disconnect(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_disconnect(uint8_t rhport) { (void) rhport; EXTEN->EXTEN_CTR &= ~EXTEN_USBD_PU_EN; } -void fsdev_connect(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_connect(uint8_t rhport) { (void) rhport; EXTEN->EXTEN_CTR |= EXTEN_USBD_PU_EN; } diff --git a/src/portable/st/stm32_fsdev/fsdev_common.c b/src/portable/st/stm32_fsdev/fsdev_common.c new file mode 100644 index 000000000..d021a6abf --- /dev/null +++ b/src/portable/st/stm32_fsdev/fsdev_common.c @@ -0,0 +1,241 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 Ha Thach (tinyusb.org) + * Copyright (c) 2025, HiFiPhile (Zixun LI) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if defined(TUP_USBIP_FSDEV) && (CFG_TUH_ENABLED || CFG_TUD_ENABLED) + +#include "fsdev_common.h" + +//--------------------------------------------------------------------+ +// PMA read/write +//--------------------------------------------------------------------+ + +// Write to packet memory area (PMA) from user memory +// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT +// - Uses unaligned for RAM (since M0 cannot access unaligned address) +bool fsdev_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes) { + if (nbytes == 0) return true; + uint32_t n_write = nbytes / FSDEV_BUS_SIZE; + + fsdev_pma_buf_t* pma_buf = PMA_BUF_AT(dst); + const uint8_t *src8 = src; + + while (n_write--) { + pma_buf->value = fsdevbus_unaligned_read(src8); + src8 += FSDEV_BUS_SIZE; + pma_buf++; + } + + // odd bytes e.g 1 for 16-bit or 1-3 for 32-bit + uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); + if (odd) { + fsdev_bus_t temp = 0; + for(uint16_t i = 0; i < odd; i++) { + temp |= *src8++ << (i * 8); + } + pma_buf->value = temp; + } + + return true; +} + +// Read from packet memory area (PMA) to user memory. +// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT +// - Uses unaligned for RAM (since M0 cannot access unaligned address) +bool fsdev_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes) { + if (nbytes == 0) return true; + uint32_t n_read = nbytes / FSDEV_BUS_SIZE; + + fsdev_pma_buf_t* pma_buf = PMA_BUF_AT(src); + uint8_t *dst8 = (uint8_t *)dst; + + while (n_read--) { + fsdevbus_unaligned_write(dst8, (fsdev_bus_t ) pma_buf->value); + dst8 += FSDEV_BUS_SIZE; + pma_buf++; + } + + // odd bytes e.g 1 for 16-bit or 1-3 for 32-bit + uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); + if (odd) { + fsdev_bus_t temp = pma_buf->value; + while (odd--) { + *dst8++ = (uint8_t) (temp & 0xfful); + temp >>= 8; + } + } + + return true; +} + +// Write to PMA from FIFO +bool fsdev_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes) { + if (wNBytes == 0) return true; + + // Since we copy from a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies + tu_fifo_buffer_info_t info; + tu_fifo_get_read_info(ff, &info); + + uint16_t cnt_lin = tu_min16(wNBytes, info.len_lin); + uint16_t cnt_wrap = tu_min16(wNBytes - cnt_lin, info.len_wrap); + uint16_t const cnt_total = cnt_lin + cnt_wrap; + + // We want to read from the FIFO and write it into the PMA, if LIN part is ODD and has WRAPPED part, + // last lin byte will be combined with wrapped part To ensure PMA is always access aligned + uint16_t lin_even = cnt_lin & ~(FSDEV_BUS_SIZE - 1); + uint16_t lin_odd = cnt_lin & (FSDEV_BUS_SIZE - 1); + uint8_t const *src8 = (uint8_t const*) info.ptr_lin; + + // write even linear part + fsdev_write_packet_memory(dst, src8, lin_even); + dst += lin_even; + src8 += lin_even; + + if (lin_odd == 0) { + src8 = (uint8_t const*) info.ptr_wrap; + } else { + // Combine last linear bytes + first wrapped bytes to form fsdev bus width data + fsdev_bus_t temp = 0; + uint16_t i; + for(i = 0; i < lin_odd; i++) { + temp |= *src8++ << (i * 8); + } + + src8 = (uint8_t const*) info.ptr_wrap; + for(; i < FSDEV_BUS_SIZE && cnt_wrap > 0; i++, cnt_wrap--) { + temp |= *src8++ << (i * 8); + } + + fsdev_write_packet_memory(dst, &temp, FSDEV_BUS_SIZE); + dst += FSDEV_BUS_SIZE; + } + + // write the rest of the wrapped part + fsdev_write_packet_memory(dst, src8, cnt_wrap); + + tu_fifo_advance_read_pointer(ff, cnt_total); + return true; +} + +// Read from PMA to FIFO +bool fsdev_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes) { + if (wNBytes == 0) return true; + + // Since we copy into a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies + // Check for first linear part + tu_fifo_buffer_info_t info; + tu_fifo_get_write_info(ff, &info); // We want to read from the FIFO + + uint16_t cnt_lin = tu_min16(wNBytes, info.len_lin); + uint16_t cnt_wrap = tu_min16(wNBytes - cnt_lin, info.len_wrap); + uint16_t cnt_total = cnt_lin + cnt_wrap; + + // We want to read from the FIFO and write it into the PMA, if LIN part is ODD and has WRAPPED part, + // last lin byte will be combined with wrapped part To ensure PMA is always access aligned + + uint16_t lin_even = cnt_lin & ~(FSDEV_BUS_SIZE - 1); + uint16_t lin_odd = cnt_lin & (FSDEV_BUS_SIZE - 1); + uint8_t *dst8 = (uint8_t *) info.ptr_lin; + + // read even linear part + fsdev_read_packet_memory(dst8, src, lin_even); + dst8 += lin_even; + src += lin_even; + + if (lin_odd == 0) { + dst8 = (uint8_t *) info.ptr_wrap; + } else { + // Combine last linear bytes + first wrapped bytes to form fsdev bus width data + fsdev_bus_t temp; + fsdev_read_packet_memory(&temp, src, FSDEV_BUS_SIZE); + src += FSDEV_BUS_SIZE; + + uint16_t i; + for (i = 0; i < lin_odd; i++) { + *dst8++ = (uint8_t) (temp & 0xfful); + temp >>= 8; + } + + dst8 = (uint8_t *) info.ptr_wrap; + for (; i < FSDEV_BUS_SIZE && cnt_wrap > 0; i++, cnt_wrap--) { + *dst8++ = (uint8_t) (temp & 0xfful); + temp >>= 8; + } + } + + // read the rest of the wrapped part + fsdev_read_packet_memory(dst8, src, cnt_wrap); + + tu_fifo_advance_write_pointer(ff, cnt_total); + return true; +} + +//--------------------------------------------------------------------+ +// BTable Helper +//--------------------------------------------------------------------+ + +/* Aligned buffer size according to hardware */ +uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block) { + /* The STM32 full speed USB peripheral supports only a limited set of + * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ + uint16_t block_in_bytes; + if (size > 62) { + block_in_bytes = 32; + *blsize = 1; + *num_block = tu_div_ceil(size, 32); + } else { + block_in_bytes = 2; + *blsize = 0; + *num_block = tu_div_ceil(size, 2); + } + + return (*num_block) * block_in_bytes; +} + +void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint16_t wCount) { + uint8_t blsize, num_block; + (void) pma_align_buffer_size(wCount, &blsize, &num_block); + + /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ + uint16_t bl_nb = (blsize << 15) | ((num_block - blsize) << 10); + if (bl_nb == 0) { + // zlp but 0 is invalid value, set blsize to 1 (32 bytes) + // Note: lower value can cause PMAOVR on setup with ch32v203 + bl_nb = 1 << 15; + } + +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (bl_nb << 16) | (count_addr & 0x0000FFFFu); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + FSDEV_BTABLE->ep16[ep_id][buf_id].count = bl_nb; +#endif +} + +#endif diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h new file mode 100644 index 000000000..e363245ec --- /dev/null +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -0,0 +1,343 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) N Conrad + * Copyright (c) 2024, hathach (tinyusb.org) + * Copyright (c) 2025, HiFiPhile (Zixun LI) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef TUSB_FSDEV_COMMON_H +#define TUSB_FSDEV_COMMON_H + +#include "common/tusb_common.h" + +#if CFG_TUD_ENABLED +#include "device/dcd.h" +#endif + +#if CFG_TUH_ENABLED +#include "host/hcd.h" +#endif + +#if defined(TUP_USBIP_FSDEV_STM32) + #include "fsdev_stm32.h" +#elif defined(TUP_USBIP_FSDEV_CH32) + #include "fsdev_ch32.h" +#elif defined(TUP_USBIP_FSDEV_AT32) + #include "fsdev_at32.h" +#else + #error "Unknown USB IP" +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +// If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it +// Both of these MUST be a multiple of 2, and are in byte units. +#ifndef FSDEV_BTABLE_BASE +#define FSDEV_BTABLE_BASE 0U +#endif + +TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 bytes"); + +// FSDEV_PMA_SIZE is PMA buffer size in bytes. +// - 512-byte devices, access with a stride of two words (use every other 16-bit address) +// - 1024-byte devices, access with a stride of one word (use every 16-bit address) +// - 2048-byte devices, access with 32-bit address + +// For purposes of accessing the packet +#if FSDEV_PMA_SIZE == 512 + // 1x16 bit / word access scheme + #define FSDEV_PMA_STRIDE 2 + #define pma_access_scheme TU_ATTR_ALIGNED(4) +#elif FSDEV_PMA_SIZE == 1024 + // 2x16 bit / word access scheme + #define FSDEV_PMA_STRIDE 1 + #define pma_access_scheme +#elif FSDEV_PMA_SIZE == 2048 + // 32 bit access scheme + #define FSDEV_BUS_32BIT + #define FSDEV_PMA_STRIDE 1 + #define pma_access_scheme +#endif + +// The fsdev_bus_t type can be used for both register and PMA access necessities +#ifdef FSDEV_BUS_32BIT + typedef uint32_t fsdev_bus_t; + #define fsdevbus_unaligned_read(_addr) tu_unaligned_read32(_addr) + #define fsdevbus_unaligned_write(_addr, _value) tu_unaligned_write32(_addr, _value) +#else + typedef uint16_t fsdev_bus_t; + #define fsdevbus_unaligned_read(_addr) tu_unaligned_read16(_addr) + #define fsdevbus_unaligned_write(_addr, _value) tu_unaligned_write16(_addr, _value) +#endif + +enum { + FSDEV_BUS_SIZE = sizeof(fsdev_bus_t), +}; + +//--------------------------------------------------------------------+ +// BTable Typedef +//--------------------------------------------------------------------+ +enum { + BTABLE_BUF_TX = 0, + BTABLE_BUF_RX = 1 +}; + +// hardware limit endpoint +#define FSDEV_EP_COUNT 8 + +// Buffer Table is located in Packet Memory Area (PMA) and therefore its address access is forced to either +// 16-bit or 32-bit depending on FSDEV_BUS_32BIT. +// 0: TX (IN), 1: RX (OUT) +typedef union { + // data is strictly 16-bit access (address could be 32-bit aligned) + struct { + volatile pma_access_scheme uint16_t addr; + volatile pma_access_scheme uint16_t count; + } ep16[FSDEV_EP_COUNT][2]; + + // strictly 32-bit access + struct { + volatile uint32_t count_addr; + } ep32[FSDEV_EP_COUNT][2]; +} fsdev_btable_t; + +TU_VERIFY_STATIC(sizeof(fsdev_btable_t) == FSDEV_EP_COUNT*8*FSDEV_PMA_STRIDE, "size is not correct"); +TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE does not fit in PMA RAM"); + +#define FSDEV_BTABLE ((volatile fsdev_btable_t*) (FSDEV_PMA_BASE + FSDEV_PMA_STRIDE*(FSDEV_BTABLE_BASE))) + +typedef struct { + volatile pma_access_scheme fsdev_bus_t value; +} fsdev_pma_buf_t; + +#define PMA_BUF_AT(_addr) ((fsdev_pma_buf_t*) (FSDEV_PMA_BASE + FSDEV_PMA_STRIDE*(_addr))) + +//--------------------------------------------------------------------+ +// Registers Typedef +//--------------------------------------------------------------------+ + +// volatile 32-bit aligned +#define _va32 volatile TU_ATTR_ALIGNED(4) + +typedef struct { + struct { + _va32 fsdev_bus_t reg; + }ep[FSDEV_EP_COUNT]; + + _va32 uint32_t RESERVED7[8]; // Reserved + _va32 fsdev_bus_t CNTR; // 40: Control register + _va32 fsdev_bus_t ISTR; // 44: Interrupt status register + _va32 fsdev_bus_t FNR; // 48: Frame number register + _va32 fsdev_bus_t DADDR; // 4C: Device address register + _va32 fsdev_bus_t BTABLE; // 50: Buffer Table address register (16-bit only) + _va32 fsdev_bus_t LPMCSR; // 54: LPM Control and Status Register (32-bit only) + _va32 fsdev_bus_t BCDR; // 58: Battery Charging Detector Register (32-bit only) +} fsdev_regs_t; + +TU_VERIFY_STATIC(offsetof(fsdev_regs_t, CNTR) == 0x40, "Wrong offset"); +TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); + +#define FSDEV_REG ((fsdev_regs_t*) FSDEV_REG_BASE) + + +#ifndef USB_EPTX_STAT +#define USB_EPTX_STAT 0x0030U +#endif + +#ifndef USB_EPRX_STAT +#define USB_EPRX_STAT 0x3000U +#endif + +#ifndef USB_EPTX_STAT_Pos +#define USB_EPTX_STAT_Pos 4u +#endif + +#ifndef USB_EP_DTOG_TX_Pos +#define USB_EP_DTOG_TX_Pos 6u +#endif + +#ifndef USB_EP_CTR_TX_Pos +#define USB_EP_CTR_TX_Pos 7u +#endif + +typedef enum { + EP_STAT_DISABLED = 0, + EP_STAT_STALL = 1, + EP_STAT_NAK = 2, + EP_STAT_VALID = 3 +}ep_stat_t; + +#define EP_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) +#define EP_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) + +#define CH_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) +#define CH_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) + +//--------------------------------------------------------------------+ +// Endpoint Helper +// - CTR is write 0 to clear +// - DTOG and STAT are write 1 to toggle +//--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_read(uint32_t ep_id) { + return FSDEV_REG->ep[ep_id].reg; +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value, bool need_exclusive) { + if (need_exclusive) { + fsdev_int_disable(0); + } + + FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; + + if (need_exclusive) { + fsdev_int_enable(0); + } +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_write_clear_ctr(uint32_t ep_id, tusb_dir_t dir) { + uint32_t reg = FSDEV_REG->ep[ep_id].reg; + reg |= USB_EP_CTR_TX | USB_EP_CTR_RX; + reg &= USB_EPREG_MASK; + reg &= ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); + ep_write(ep_id, reg, false); +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_change_status(uint32_t* reg, tusb_dir_t dir, ep_stat_t state) { + *reg ^= (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_change_dtog(uint32_t* reg, tusb_dir_t dir, uint8_t state) { + *reg ^= (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); +} + +TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { + return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; +} + +//--------------------------------------------------------------------+ +// Channel Helper +// - Direction is opposite to endpoint direction +//--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ch_read(uint32_t ch_id) { + return ep_read(ch_id); +} + +TU_ATTR_ALWAYS_INLINE static inline void ch_write(uint32_t ch_id, uint32_t value, bool need_exclusive) { + ep_write(ch_id, value, need_exclusive); +} + +TU_ATTR_ALWAYS_INLINE static inline void ch_write_clear_ctr(uint32_t ch_id, tusb_dir_t dir) { + uint32_t reg = FSDEV_REG->ep[ch_id].reg; + reg |= USB_EP_CTR_TX | USB_EP_CTR_RX; + reg &= USB_EPREG_MASK; + reg &= ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); + ep_write(ch_id, reg, false); +} + +TU_ATTR_ALWAYS_INLINE static inline void ch_change_status(uint32_t* reg, tusb_dir_t dir, ep_stat_t state) { + *reg ^= (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); +} + +TU_ATTR_ALWAYS_INLINE static inline void ch_change_dtog(uint32_t* reg, tusb_dir_t dir, uint8_t state) { + *reg ^= (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); +} + +//--------------------------------------------------------------------+ +// BTable Helper +//--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t buf_id) { +#ifdef FSDEV_BUS_32BIT + return FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr & 0x0000FFFFu; +#else + return FSDEV_BTABLE->ep16[ep_id][buf_id].addr; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t buf_id, uint16_t addr) { +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + FSDEV_BTABLE->ep16[ep_id][buf_id].addr = addr; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline uint16_t btable_get_count(uint32_t ep_id, uint8_t buf_id) { + uint16_t count; +#ifdef FSDEV_BUS_32BIT + count = (FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr >> 16); +#else + count = FSDEV_BTABLE->ep16[ep_id][buf_id].count; +#endif + return count & 0x3FFU; +} + +TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t buf_id, uint16_t byte_count) { +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][buf_id].count; + cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); + FSDEV_BTABLE->ep16[ep_id][buf_id].count = cnt; +#endif +} + +/* Aligned buffer size according to hardware */ +uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block); + +void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint16_t wCount); + +//--------------------------------------------------------------------+ +// PMA (Packet Memory Area) Access +//--------------------------------------------------------------------+ + +// Write to packet memory area (PMA) from user memory +// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT +// - Uses unaligned for RAM (since M0 cannot access unaligned address) +bool fsdev_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes); + +// Read from packet memory area (PMA) to user memory. +// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT +// - Uses unaligned for RAM (since M0 cannot access unaligned address) +bool fsdev_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes); + +// Write to PMA from FIFO +bool fsdev_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes); + +// Read from PMA to FIFO +bool fsdev_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes); + +#ifdef __cplusplus +} +#endif + +#endif /* TUSB_FSDEV_COMMON_H */ diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index d47d23f14..71370b189 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -321,8 +321,6 @@ #define FSDEV_USE_SBUF_ISO 0 #endif -#include "fsdev_type.h" - //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ @@ -374,7 +372,7 @@ static const IRQn_Type fsdev_irq[] = { }; enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; -void fsdev_int_enable(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_int_enable(uint8_t rhport) { (void)rhport; // forces write to RAM before allowing ISR to execute @@ -397,7 +395,7 @@ void fsdev_int_enable(uint8_t rhport) { } } -void fsdev_int_disable(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_int_disable(uint8_t rhport) { (void)rhport; #if CFG_TUSB_MCU == OPT_MCU_STM32F3 && defined(SYSCFG_CFGR1_USB_IT_RMP) @@ -422,24 +420,24 @@ void fsdev_int_disable(uint8_t rhport) { // Define only on MCU with internal pull-up. BSP can define on MCU without internal PU. #if defined(USB_BCDR_DPPU) -void fsdev_disconnect(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_disconnect(uint8_t rhport) { (void)rhport; USB->BCDR &= ~(USB_BCDR_DPPU); } -void fsdev_connect(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_connect(uint8_t rhport) { (void)rhport; USB->BCDR |= USB_BCDR_DPPU; } #elif defined(SYSCFG_PMC_USB_PU) // works e.g. on STM32L151 -void fsdev_disconnect(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_disconnect(uint8_t rhport) { (void)rhport; SYSCFG->PMC &= ~(SYSCFG_PMC_USB_PU); } -void fsdev_connect(uint8_t rhport) { +TU_ATTR_ALWAYS_INLINE static inline void fsdev_connect(uint8_t rhport) { (void)rhport; SYSCFG->PMC |= SYSCFG_PMC_USB_PU; } diff --git a/src/portable/st/stm32_fsdev/fsdev_type.h b/src/portable/st/stm32_fsdev/fsdev_type.h deleted file mode 100644 index 2b340d64a..000000000 --- a/src/portable/st/stm32_fsdev/fsdev_type.h +++ /dev/null @@ -1,344 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright(c) N Conrad - * Copyright(c) 2024, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef TUSB_FSDEV_TYPE_H -#define TUSB_FSDEV_TYPE_H - -#ifdef __cplusplus - extern "C" { -#endif - -#include "stdint.h" - -// If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it -// Both of these MUST be a multiple of 2, and are in byte units. -#ifndef FSDEV_BTABLE_BASE -#define FSDEV_BTABLE_BASE 0U -#endif - -TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 bytes"); - -// FSDEV_PMA_SIZE is PMA buffer size in bytes. -// - 512-byte devices, access with a stride of two words (use every other 16-bit address) -// - 1024-byte devices, access with a stride of one word (use every 16-bit address) -// - 2048-byte devices, access with 32-bit address - -// For purposes of accessing the packet -#if FSDEV_PMA_SIZE == 512 - // 1x16 bit / word access scheme - #define FSDEV_PMA_STRIDE 2 - #define pma_access_scheme TU_ATTR_ALIGNED(4) -#elif FSDEV_PMA_SIZE == 1024 - // 2x16 bit / word access scheme - #define FSDEV_PMA_STRIDE 1 - #define pma_access_scheme -#elif FSDEV_PMA_SIZE == 2048 - // 32 bit access scheme - #define FSDEV_BUS_32BIT - #define FSDEV_PMA_STRIDE 1 - #define pma_access_scheme -#endif - -// The fsdev_bus_t type can be used for both register and PMA access necessities -#ifdef FSDEV_BUS_32BIT - typedef uint32_t fsdev_bus_t; - #define fsdevbus_unaligned_read(_addr) tu_unaligned_read32(_addr) - #define fsdevbus_unaligned_write(_addr, _value) tu_unaligned_write32(_addr, _value) -#else - typedef uint16_t fsdev_bus_t; - #define fsdevbus_unaligned_read(_addr) tu_unaligned_read16(_addr) - #define fsdevbus_unaligned_write(_addr, _value) tu_unaligned_write16(_addr, _value) -#endif - -enum { - FSDEV_BUS_SIZE = sizeof(fsdev_bus_t), -}; - -//--------------------------------------------------------------------+ -// BTable Typedef -//--------------------------------------------------------------------+ -enum { - BTABLE_BUF_TX = 0, - BTABLE_BUF_RX = 1 -}; - -// hardware limit endpoint -#define FSDEV_EP_COUNT 8 - -// Buffer Table is located in Packet Memory Area (PMA) and therefore its address access is forced to either -// 16-bit or 32-bit depending on FSDEV_BUS_32BIT. -// 0: TX (IN), 1: RX (OUT) -typedef union { - // data is strictly 16-bit access (address could be 32-bit aligned) - struct { - volatile pma_access_scheme uint16_t addr; - volatile pma_access_scheme uint16_t count; - } ep16[FSDEV_EP_COUNT][2]; - - // strictly 32-bit access - struct { - volatile uint32_t count_addr; - } ep32[FSDEV_EP_COUNT][2]; -} fsdev_btable_t; - -TU_VERIFY_STATIC(sizeof(fsdev_btable_t) == FSDEV_EP_COUNT*8*FSDEV_PMA_STRIDE, "size is not correct"); -TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE does not fit in PMA RAM"); - -#define FSDEV_BTABLE ((volatile fsdev_btable_t*) (FSDEV_PMA_BASE + FSDEV_PMA_STRIDE*(FSDEV_BTABLE_BASE))) - -typedef struct { - volatile pma_access_scheme fsdev_bus_t value; -} fsdev_pma_buf_t; - -#define PMA_BUF_AT(_addr) ((fsdev_pma_buf_t*) (FSDEV_PMA_BASE + FSDEV_PMA_STRIDE*(_addr))) - -//--------------------------------------------------------------------+ -// Registers Typedef -//--------------------------------------------------------------------+ - -// volatile 32-bit aligned -#define _va32 volatile TU_ATTR_ALIGNED(4) - -typedef struct { - struct { - _va32 fsdev_bus_t reg; - }ep[FSDEV_EP_COUNT]; - - _va32 uint32_t RESERVED7[8]; // Reserved - _va32 fsdev_bus_t CNTR; // 40: Control register - _va32 fsdev_bus_t ISTR; // 44: Interrupt status register - _va32 fsdev_bus_t FNR; // 48: Frame number register - _va32 fsdev_bus_t DADDR; // 4C: Device address register - _va32 fsdev_bus_t BTABLE; // 50: Buffer Table address register (16-bit only) - _va32 fsdev_bus_t LPMCSR; // 54: LPM Control and Status Register (32-bit only) - _va32 fsdev_bus_t BCDR; // 58: Battery Charging Detector Register (32-bit only) -} fsdev_regs_t; - -TU_VERIFY_STATIC(offsetof(fsdev_regs_t, CNTR) == 0x40, "Wrong offset"); -TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); - -#define FSDEV_REG ((fsdev_regs_t*) FSDEV_REG_BASE) - - -#ifndef USB_EPTX_STAT -#define USB_EPTX_STAT 0x0030U -#endif - -#ifndef USB_EPRX_STAT -#define USB_EPRX_STAT 0x3000U -#endif - -#ifndef USB_EPTX_STAT_Pos -#define USB_EPTX_STAT_Pos 4u -#endif - -#ifndef USB_EP_DTOG_TX_Pos -#define USB_EP_DTOG_TX_Pos 6u -#endif - -#ifndef USB_EP_CTR_TX_Pos -#define USB_EP_CTR_TX_Pos 7u -#endif - -typedef enum { - EP_STAT_DISABLED = 0, - EP_STAT_STALL = 1, - EP_STAT_NAK = 2, - EP_STAT_VALID = 3 -}ep_stat_t; - -#define EP_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) -#define EP_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) - -#define CH_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) -#define CH_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) - -void fsdev_int_enable(uint8_t rhport); -void fsdev_int_disable(uint8_t rhport); -void fsdev_connect(uint8_t rhport); -void fsdev_disconnect(uint8_t rhport); - -//--------------------------------------------------------------------+ -// Endpoint Helper -// - CTR is write 0 to clear -// - DTOG and STAT are write 1 to toggle -//--------------------------------------------------------------------+ - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_read(uint32_t ep_id) { - return FSDEV_REG->ep[ep_id].reg; -} - -TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value, bool need_exclusive) { - if (need_exclusive) { - fsdev_int_disable(0); - } - - FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; - - if (need_exclusive) { - fsdev_int_enable(0); - } -} - -TU_ATTR_ALWAYS_INLINE static inline void ep_write_clear_ctr(uint32_t ep_id, tusb_dir_t dir) { - uint32_t reg = FSDEV_REG->ep[ep_id].reg; - reg |= USB_EP_CTR_TX | USB_EP_CTR_RX; - reg &= USB_EPREG_MASK; - reg &= ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); - ep_write(ep_id, reg, false); -} - -TU_ATTR_ALWAYS_INLINE static inline void ep_change_status(uint32_t* reg, tusb_dir_t dir, ep_stat_t state) { - *reg ^= (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); -} - -TU_ATTR_ALWAYS_INLINE static inline void ep_change_dtog(uint32_t* reg, tusb_dir_t dir, uint8_t state) { - *reg ^= (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); -} - -TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { - return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; -} - -//--------------------------------------------------------------------+ -// Channel Helper -// - Direction is opposite to endpoint direction -//--------------------------------------------------------------------+ - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ch_read(uint32_t ch_id) { - return ep_read(ch_id); -} - -TU_ATTR_ALWAYS_INLINE static inline void ch_write(uint32_t ch_id, uint32_t value, bool need_exclusive) { - ep_write(ch_id, value, need_exclusive); -} - -TU_ATTR_ALWAYS_INLINE static inline void ch_write_clear_ctr(uint32_t ch_id, tusb_dir_t dir) { - uint32_t reg = FSDEV_REG->ep[ch_id].reg; - reg |= USB_EP_CTR_TX | USB_EP_CTR_RX; - reg &= USB_EPREG_MASK; - reg &= ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); - ep_write(ch_id, reg, false); -} - -TU_ATTR_ALWAYS_INLINE static inline void ch_change_status(uint32_t* reg, tusb_dir_t dir, ep_stat_t state) { - *reg ^= (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); -} - -TU_ATTR_ALWAYS_INLINE static inline void ch_change_dtog(uint32_t* reg, tusb_dir_t dir, uint8_t state) { - *reg ^= (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); -} - -//--------------------------------------------------------------------+ -// BTable Helper -//--------------------------------------------------------------------+ - -TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t buf_id) { -#ifdef FSDEV_BUS_32BIT - return FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr & 0x0000FFFFu; -#else - return FSDEV_BTABLE->ep16[ep_id][buf_id].addr; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t buf_id, uint16_t addr) { -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); - FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; -#else - FSDEV_BTABLE->ep16[ep_id][buf_id].addr = addr; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline uint16_t btable_get_count(uint32_t ep_id, uint8_t buf_id) { - uint16_t count; -#ifdef FSDEV_BUS_32BIT - count = (FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr >> 16); -#else - count = FSDEV_BTABLE->ep16[ep_id][buf_id].count; -#endif - return count & 0x3FFU; -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t buf_id, uint16_t byte_count) { -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); - FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; -#else - uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][buf_id].count; - cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); - FSDEV_BTABLE->ep16[ep_id][buf_id].count = cnt; -#endif -} - -/* Aligned buffer size according to hardware */ -TU_ATTR_ALWAYS_INLINE static inline uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block) { - /* The STM32 full speed USB peripheral supports only a limited set of - * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ - uint16_t block_in_bytes; - if (size > 62) { - block_in_bytes = 32; - *blsize = 1; - *num_block = tu_div_ceil(size, 32); - } else { - block_in_bytes = 2; - *blsize = 0; - *num_block = tu_div_ceil(size, 2); - } - - return (*num_block) * block_in_bytes; -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint16_t wCount) { - uint8_t blsize, num_block; - (void) pma_align_buffer_size(wCount, &blsize, &num_block); - - /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ - uint16_t bl_nb = (blsize << 15) | ((num_block - blsize) << 10); - if (bl_nb == 0) { - // zlp but 0 is invalid value, set blsize to 1 (32 bytes) - // Note: lower value can cause PMAOVR on setup with ch32v203 - bl_nb = 1 << 15; - } - -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (bl_nb << 16) | (count_addr & 0x0000FFFFu); - FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; -#else - FSDEV_BTABLE->ep16[ep_id][buf_id].count = bl_nb; -#endif - -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 1c08f64d6..b3c08ba23 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -30,6 +30,7 @@ * * C0 2048 byte buffer; 32-bit bus; host mode * G0 2048 byte buffer; 32-bit bus; host mode + * U3 2048 byte buffer; 32-bit bus; host mode * H5 2048 byte buffer; 32-bit bus; host mode * U535, U545 2048 byte buffer; 32-bit bus; host mode * @@ -42,19 +43,14 @@ #include "host/hcd.h" #include "host/usbh.h" - -#if defined(TUP_USBIP_FSDEV_STM32) - #include "fsdev_stm32.h" -#else - #error "Unknown USB IP" -#endif +#include "fsdev_common.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ // Debug level for FSDEV -#define FSDEV_DEBUG 1 +#define FSDEV_DEBUG 3 // Max number of endpoints application can open, can be larger than FSDEV_EP_COUNT #ifndef CFG_TUH_FSDEV_ENDPOINT_MAX @@ -76,9 +72,12 @@ typedef struct { uint8_t ep_addr; uint8_t ep_type; uint8_t interval; - bool low_speed; - bool allocated; - bool next_setup; + struct TU_ATTR_PACKED { + uint8_t low_speed : 1; + uint8_t allocated : 1; + uint8_t next_setup : 1; + uint8_t pid : 1; + }; } hcd_endpoint_t; // Additional info for each channel when it is active @@ -88,7 +87,7 @@ typedef struct { uint8_t dev_addr; uint8_t ep_num; uint8_t ep_type; - bool allocated[2]; + uint8_t allocated[2]; uint8_t retry[2]; uint8_t result; } hcd_xfer_t; @@ -113,24 +112,35 @@ static uint8_t endpoint_alloc(void); static uint8_t endpoint_find(uint8_t dev_addr, uint8_t ep_addr); static uint32_t hcd_pma_alloc(uint8_t channel, tusb_dir_t dir, uint16_t len); static uint8_t channel_alloc(uint8_t dev_addr, uint8_t ep_addr, uint8_t ep_type); -static bool hcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes); -static bool hcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes); static bool edpt_xfer_kickoff(uint8_t ep_id); static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir); static void edpoint_close(uint8_t ep_id); static void port_status_handler(uint8_t rhport, bool in_isr); +static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); +static void ch_handle_nak(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); +static void ch_handle_stall(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); +static void ch_handle_error(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); + //--------------------------------------------------------------------+ // Inline Functions //--------------------------------------------------------------------+ static inline void endpoint_dealloc(hcd_endpoint_t* edpt) { - edpt->allocated = false; + edpt->allocated = 0; } static inline void channel_dealloc(hcd_xfer_t* xfer, tusb_dir_t dir) { - xfer->allocated[dir] = false; + xfer->allocated[dir] = 0; } +// Write channel state in specified direction +static inline void channel_write_status(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir, ep_stat_t state, bool need_exclusive) { + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(dir); + ch_change_status(&ch_reg, dir, state); + ch_write(ch_id, ch_reg, need_exclusive); +} + + //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ @@ -218,139 +228,153 @@ static void port_status_handler(uint8_t rhport, bool in_isr) { } } -// Handle CTR interrupt for the TX/OUT direction -static void handle_ctr_tx(uint32_t ch_id) { - uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; +//--------------------------------------------------------------------+ +// Interrupt Helper Functions +//--------------------------------------------------------------------+ +// Handle ACK response +static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { uint8_t const ep_num = ch_reg & USB_EPADDR_FIELD; uint8_t const daddr = (ch_reg & USB_CHEP_DEVADDR_Msk) >> USB_CHEP_DEVADDR_Pos; - uint8_t ep_id = endpoint_find(daddr, ep_num); - TU_VERIFY(ep_id != TUSB_INDEX_INVALID_8, ); + uint8_t ep_id = endpoint_find(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0)); + if (ep_id == TUSB_INDEX_INVALID_8) return; hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; - TU_VERIFY(xfer->allocated[TUSB_DIR_OUT],); - // Manage Correct Transaction - if ((ch_reg & USB_CH_ERRTX) == 0U) { - // Acked - if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_ACK_SBUF) { - if (edpt->buflen != xfer->queued_len[TUSB_DIR_OUT]) { - uint16_t const len = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); - uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_TX); - hcd_write_packet_memory(pma_addr, &(edpt->buffer[xfer->queued_len[TUSB_DIR_OUT]]), len); - btable_set_count(ch_id, BTABLE_BUF_TX, len); - xfer->queued_len[TUSB_DIR_OUT] += len; - - ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_VALID); - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // only change TX Status, reserve other toggle bits - ch_write(ch_id, ch_reg, false); - } else { - channel_dealloc(xfer, TUSB_DIR_OUT); - hcd_event_xfer_complete(daddr, ep_num, xfer->queued_len[TUSB_DIR_OUT], XFER_RESULT_SUCCESS, true); - } - } else if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_NAK) { - // NAKed - if (edpt->ep_type != TUSB_XFER_INTERRUPT) { - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // will change TX Status, reserved other toggle bits - ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_VALID); - ch_write(ch_id, ch_reg, false); - } - } else if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_STALL) { - // STALLed + if (dir == TUSB_DIR_OUT) { + // OUT/TX direction + if (edpt->buflen != xfer->queued_len[TUSB_DIR_OUT]) { + // More data to send + uint16_t const len = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); + uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_TX); + fsdev_write_packet_memory(pma_addr, &(edpt->buffer[xfer->queued_len[TUSB_DIR_OUT]]), len); + btable_set_count(ch_id, BTABLE_BUF_TX, len); + xfer->queued_len[TUSB_DIR_OUT] += len; + channel_write_status(ch_id, ch_reg, TUSB_DIR_OUT, EP_STAT_VALID, false); + } else { + // Transfer complete channel_dealloc(xfer, TUSB_DIR_OUT); - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // will change TX Status, reserved other toggle bits - ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_DISABLED); - ch_write(ch_id, ch_reg, false); - hcd_event_xfer_complete(daddr, ep_num, xfer->queued_len[TUSB_DIR_OUT], XFER_RESULT_STALLED, true); + edpt->pid = (ch_reg & USB_CHEP_DTOG_TX) ? 1 : 0; + hcd_event_xfer_complete(daddr, ep_num, xfer->queued_len[TUSB_DIR_OUT], XFER_RESULT_SUCCESS, true); } } else { - // Error - TU_LOG(FSDEV_DEBUG, "handle_ctr_tx error epreg=0x%08X ch=%u ep=0x%02X daddr=%u queued=%u/%u\r\n", - ch_reg, ch_id, ep_num, daddr, xfer->queued_len[TUSB_DIR_OUT], edpt->buflen); - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // will change TX Status, reserved other toggle bits - ch_reg &=~USB_CH_ERRTX; - if (xfer->retry[TUSB_DIR_OUT] < HCD_XFER_ERROR_MAX) { - // Retry - xfer->retry[TUSB_DIR_OUT]++; + // IN/RX direction + uint16_t const rx_count = btable_get_count(ch_id, BTABLE_BUF_RX); + uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_RX); + + fsdev_read_packet_memory(edpt->buffer + xfer->queued_len[TUSB_DIR_IN], pma_addr, rx_count); + xfer->queued_len[TUSB_DIR_IN] += rx_count; + + if ((rx_count < edpt->max_packet_size) || (xfer->queued_len[TUSB_DIR_IN] >= edpt->buflen)) { + // Transfer complete (short packet or all bytes received) + channel_dealloc(xfer, TUSB_DIR_IN); + edpt->pid = (ch_reg & USB_CHEP_DTOG_RX) ? 1 : 0; + hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, xfer->queued_len[TUSB_DIR_IN], XFER_RESULT_SUCCESS, true); } else { - // Failed after retries - channel_dealloc(xfer, TUSB_DIR_OUT); - ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_DISABLED); - hcd_event_xfer_complete(daddr, ep_num, xfer->queued_len[TUSB_DIR_OUT], XFER_RESULT_FAILED, true); + // More data expected + uint16_t const cnt = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_IN], edpt->max_packet_size); + btable_set_rx_bufsize(ch_id, BTABLE_BUF_RX, cnt); + channel_write_status(ch_id, ch_reg, TUSB_DIR_IN, EP_STAT_VALID, false); } - ch_write(ch_id, ch_reg, false); } } -// Handle CTR interrupt for the RX/IN direction -static void handle_ctr_rx(uint32_t ch_id) { - uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; +// Handle NAK response +static void ch_handle_nak(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { uint8_t const ep_num = ch_reg & USB_EPADDR_FIELD; - uint8_t const daddr = (ch_reg & USB_CHEP_DEVADDR_Msk) >> USB_CHEP_DEVADDR_Pos; - uint8_t ep_id = endpoint_find(daddr, ep_num | TUSB_DIR_IN_MASK); - TU_VERIFY(ep_id != TUSB_INDEX_INVALID_8, ); + uint8_t ep_id = endpoint_find(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0)); + if (ep_id == TUSB_INDEX_INVALID_8) return; hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; - hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; - TU_VERIFY(xfer->allocated[TUSB_DIR_IN],); + // Retry non-periodic transfer immediately, + // Periodic transfer will be retried by next frame automatically + if (edpt->ep_type == TUSB_XFER_CONTROL || edpt->ep_type == TUSB_XFER_BULK) { + channel_write_status(ch_id, ch_reg, dir, EP_STAT_VALID, false); + } +} + +// Handle STALL response +static void ch_handle_stall(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { + uint8_t const ep_num = ch_reg & USB_EPADDR_FIELD; + uint8_t const daddr = (ch_reg & USB_CHEP_DEVADDR_Msk) >> USB_CHEP_DEVADDR_Pos; + + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + channel_dealloc(xfer, dir); + + channel_write_status(ch_id, ch_reg, dir, EP_STAT_DISABLED, false); + + hcd_event_xfer_complete(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0), + xfer->queued_len[dir], XFER_RESULT_STALLED, true); +} + +// Handle error response +static void ch_handle_error(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { + uint8_t const ep_num = ch_reg & USB_EPADDR_FIELD; + uint8_t const daddr = (ch_reg & USB_CHEP_DEVADDR_Msk) >> USB_CHEP_DEVADDR_Pos; + + uint8_t ep_id = endpoint_find(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0)); + if (ep_id == TUSB_INDEX_INVALID_8) return; + + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(dir); + ch_reg &= ~(dir == TUSB_DIR_OUT ? USB_CH_ERRTX : USB_CH_ERRRX); + + if (xfer->retry[dir] < HCD_XFER_ERROR_MAX) { + // Retry + xfer->retry[dir]++; + ch_change_status(&ch_reg, dir, EP_STAT_VALID); + } else { + // Failed after retries + channel_dealloc(xfer, dir); + ch_change_status(&ch_reg, dir, EP_STAT_DISABLED); + hcd_event_xfer_complete(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0), + xfer->queued_len[dir], XFER_RESULT_FAILED, true); + } + ch_write(ch_id, ch_reg, false); +} + +// Handle CTR interrupt for the TX/OUT direction +static void handle_ctr_tx(uint32_t ch_id) { + uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + TU_VERIFY(xfer->allocated[TUSB_DIR_OUT] == 1,); + + if ((ch_reg & USB_CH_ERRTX) == 0U) { + // No error + if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_ACK_SBUF) { + ch_handle_ack(ch_id, ch_reg, TUSB_DIR_OUT); + } else if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_NAK) { + ch_handle_nak(ch_id, ch_reg, TUSB_DIR_OUT); + } else if ((ch_reg & USB_CH_TX_STTX) == USB_CH_TX_STALL) { + ch_handle_stall(ch_id, ch_reg, TUSB_DIR_OUT); + } + } else { + ch_handle_error(ch_id, ch_reg, TUSB_DIR_OUT); + } +} + +// Handle CTR interrupt for the RX/IN direction +static void handle_ctr_rx(uint32_t ch_id) { + uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; + hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + TU_VERIFY(xfer->allocated[TUSB_DIR_IN] == 1,); - // Manage Correct Transaction if ((ch_reg & USB_CH_ERRRX) == 0U) { - // Acked + // No error if ((ch_reg & USB_CH_RX_STRX) == USB_CH_RX_ACK_SBUF) { - uint16_t const rx_count = btable_get_count(ch_id, BTABLE_BUF_RX); - uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_RX); - - hcd_read_packet_memory(edpt->buffer + xfer->queued_len[TUSB_DIR_IN], pma_addr, rx_count); - xfer->queued_len[TUSB_DIR_IN] += rx_count; - - if ((rx_count < edpt->max_packet_size) || (xfer->queued_len[TUSB_DIR_IN] >= edpt->buflen)) { - // all bytes received or short packet - channel_dealloc(xfer, TUSB_DIR_IN); - hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, xfer->queued_len[TUSB_DIR_IN], XFER_RESULT_SUCCESS, true); - } else { - // Set endpoint active again for receiving more data. Note that isochronous endpoints stay active always - uint16_t const cnt = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_IN], edpt->max_packet_size); - btable_set_rx_bufsize(ch_id, BTABLE_BUF_RX, cnt); - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change RX Status, reserved other toggle bits - ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_VALID); - ch_write(ch_id, ch_reg, false); - } + ch_handle_ack(ch_id, ch_reg, TUSB_DIR_IN); } else if ((ch_reg & USB_CH_RX_STRX) == USB_CH_RX_NAK) { - // NAKed - if (edpt->ep_type != TUSB_XFER_INTERRUPT) { - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change TX Status, reserved other toggle bits - ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_VALID); - ch_write(ch_id, ch_reg, false); - } - } else { - // STALLed - channel_dealloc(xfer, TUSB_DIR_IN); - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change TX Status, reserved other toggle bits - ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_DISABLED); - ch_write(ch_id, ch_reg, false); - hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, xfer->queued_len[TUSB_DIR_IN], XFER_RESULT_STALLED, true); + ch_handle_nak(ch_id, ch_reg, TUSB_DIR_IN); + } else if ((ch_reg & USB_CH_RX_STRX) == USB_CH_RX_STALL){ + ch_handle_stall(ch_id, ch_reg, TUSB_DIR_IN); } } else { - // Error - TU_LOG(FSDEV_DEBUG, "handle_ctr_tx error epreg=0x%08X ch=%u ep=0x%02X daddr=%u queued=%u/%u\r\n", - ch_reg, ch_id, ep_num, daddr, xfer->queued_len[TUSB_DIR_IN], edpt->buflen); - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change RX Status, reserved other toggle bits - ch_reg &=~USB_CH_ERRRX; - if (xfer->retry[TUSB_DIR_IN] < HCD_XFER_ERROR_MAX) { - // Retry - xfer->retry[TUSB_DIR_IN]++; - } else { - // Failed after retries - channel_dealloc(xfer, TUSB_DIR_IN); - ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_DISABLED); - hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, xfer->queued_len[TUSB_DIR_IN], XFER_RESULT_FAILED, true); - } - ch_write(ch_id, ch_reg, false); + ch_handle_error(ch_id, ch_reg, TUSB_DIR_IN); } } @@ -468,7 +492,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { // Close all endpoints for this device for(uint32_t i = 0; i < CFG_TUH_FSDEV_ENDPOINT_MAX; i++) { hcd_endpoint_t* edpt = &_hcd_data.edpt[i]; - if (edpt->allocated && edpt->dev_addr == dev_addr) { + if (edpt->allocated == 1 && edpt->dev_addr == dev_addr) { edpoint_close(i); } } @@ -496,7 +520,8 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const edpt->ep_type = ep_type; edpt->max_packet_size = packet_size; edpt->interval = ep_desc->bInterval; - edpt->low_speed = (hcd_port_speed_get(rhport) == TUSB_SPEED_FULL && tuh_speed_get(dev_addr) == TUSB_SPEED_LOW); + edpt->pid = 0; + edpt->low_speed = (hcd_port_speed_get(rhport) == TUSB_SPEED_FULL && tuh_speed_get(dev_addr) == TUSB_SPEED_LOW) ? 1 : 0; // EP0 is bi-directional, so we need to open both OUT and IN channels if (ep_addr == 0) { @@ -525,7 +550,7 @@ bool hcd_edpt_close(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { edpoint_close(ep_id_in); } - return false; + return true; } // Submit a transfer @@ -556,17 +581,12 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { hcd_xfer_t* xfer = &_hcd_data.xfer[i]; - if (xfer->allocated[dir] && + if (xfer->allocated[dir] == 1 && xfer->dev_addr == dev_addr && xfer->ep_num == tu_edpt_number(ep_addr)) { - channel_dealloc(xfer, dir); - - uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; // reserve CTR bits - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(dir); // will change Status, reserved other toggle bits - ch_change_status(&ch_reg, dir, EP_STAT_DISABLED); - ch_write(i, ch_reg, true); - + uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; + channel_write_status(i, ch_reg, dir, EP_STAT_DISABLED, true); } } @@ -582,6 +602,7 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet hcd_endpoint_t *edpt = &_hcd_data.edpt[ep_id]; edpt->next_setup = true; + edpt->pid = 0; return hcd_edpt_xfer(rhport, dev_addr, 0, (uint8_t*)(uintptr_t) setup_packet, 8); } @@ -592,6 +613,12 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { (void) dev_addr; (void) ep_addr; + uint8_t const ep_id = endpoint_find(dev_addr, 0); + TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + + hcd_endpoint_t *edpt = &_hcd_data.edpt[ep_id]; + edpt->pid = 0; + return true; } @@ -602,8 +629,8 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { static uint8_t endpoint_alloc(void) { for (uint32_t i = 0; i < CFG_TUH_FSDEV_ENDPOINT_MAX; i++) { hcd_endpoint_t* edpt = &_hcd_data.edpt[i]; - if (!edpt->allocated) { - edpt->allocated = true; + if (edpt->allocated == 0) { + edpt->allocated = 1; return i; } } @@ -613,7 +640,7 @@ static uint8_t endpoint_alloc(void) { static uint8_t endpoint_find(uint8_t dev_addr, uint8_t ep_addr) { for (uint32_t i = 0; i < (uint32_t)CFG_TUH_FSDEV_ENDPOINT_MAX; i++) { hcd_endpoint_t* edpt = &_hcd_data.edpt[i]; - if (edpt->allocated && edpt->dev_addr == dev_addr && edpt->ep_addr == ep_addr) { + if (edpt->allocated == 1 && edpt->dev_addr == dev_addr && edpt->ep_addr == ep_addr) { return i; } } @@ -628,24 +655,14 @@ static void edpoint_close(uint8_t ep_id) { // disable active channel belong to this endpoint for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { hcd_xfer_t* xfer = &_hcd_data.xfer[i]; - - if (xfer->allocated[TUSB_DIR_OUT] && xfer->edpt[TUSB_DIR_OUT] == edpt) { + uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; + if (xfer->allocated[TUSB_DIR_OUT] == 1 && xfer->edpt[TUSB_DIR_OUT] == edpt) { channel_dealloc(xfer, TUSB_DIR_OUT); - - uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; // reserve CTR bits - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // will change RX Status, reserved other toggle bits - ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_DISABLED); - ch_write(i, ch_reg, true); - + channel_write_status(i, ch_reg, TUSB_DIR_OUT, EP_STAT_DISABLED, true); } - if (xfer->allocated[TUSB_DIR_IN] && xfer->edpt[TUSB_DIR_IN] == edpt) { + if (xfer->allocated[TUSB_DIR_IN] == 1 && xfer->edpt[TUSB_DIR_IN] == edpt) { channel_dealloc(xfer, TUSB_DIR_IN); - - uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; // reserve CTR bits - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change TX Status, reserved other toggle bits - ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_DISABLED); - ch_write(i, ch_reg, true); - + channel_write_status(i, ch_reg, TUSB_DIR_IN, EP_STAT_DISABLED, true); } } } @@ -654,10 +671,10 @@ static void edpoint_close(uint8_t ep_id) { static uint32_t hcd_pma_alloc(uint8_t channel, tusb_dir_t dir, uint16_t len) { (void) len; // Simple static allocation as we are unlikely to handle ISO endpoints in host mode - // We just give each channel a buffer of max packet size (64 bytes) + // We just give each channel two buffers of max packet size (64 bytes) for IN and OUT uint16_t addr = FSDEV_BTABLE_BASE + 8 * FSDEV_EP_COUNT; - addr += channel * 64 * 2 + (dir == TUSB_DIR_IN ? 64 : 0); + addr += channel * TUSB_EPSIZE_BULK_FS * 2 + (dir == TUSB_DIR_IN ? TUSB_EPSIZE_BULK_FS : 0); TU_ASSERT(addr <= FSDEV_PMA_SIZE, 0xFFFF); @@ -672,12 +689,12 @@ static uint8_t channel_alloc(uint8_t dev_addr, uint8_t ep_addr, uint8_t ep_type) // Find channel allocate for same ep_num but other direction tusb_dir_t const other_dir = (dir == TUSB_DIR_IN) ? TUSB_DIR_OUT : TUSB_DIR_IN; for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { - if (!_hcd_data.xfer[i].allocated[dir] && - _hcd_data.xfer[i].allocated[other_dir] && + if (_hcd_data.xfer[i].allocated[dir] == 0 && + _hcd_data.xfer[i].allocated[other_dir] == 1 && _hcd_data.xfer[i].dev_addr == dev_addr && _hcd_data.xfer[i].ep_num == ep_num && _hcd_data.xfer[i].ep_type == ep_type) { - _hcd_data.xfer[i].allocated[dir] = true; + _hcd_data.xfer[i].allocated[dir] = 1; _hcd_data.xfer[i].queued_len[dir] = 0; _hcd_data.xfer[i].retry[dir] = 0; return i; @@ -686,11 +703,11 @@ static uint8_t channel_alloc(uint8_t dev_addr, uint8_t ep_addr, uint8_t ep_type) // Find free channel for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { - if (!_hcd_data.xfer[i].allocated[0] && !_hcd_data.xfer[i].allocated[1]) { + if (_hcd_data.xfer[i].allocated[0] == 0 && _hcd_data.xfer[i].allocated[1] == 0) { _hcd_data.xfer[i].dev_addr = dev_addr; _hcd_data.xfer[i].ep_num = ep_num; _hcd_data.xfer[i].ep_type = ep_type; - _hcd_data.xfer[i].allocated[dir] = true; + _hcd_data.xfer[i].allocated[dir] = 1; _hcd_data.xfer[i].queued_len[dir] = 0; _hcd_data.xfer[i].retry[dir] = 0; return i; @@ -748,84 +765,35 @@ static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir) { if (dir == TUSB_DIR_OUT) { uint16_t const len = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); - hcd_write_packet_memory(pma_addr, &(edpt->buffer[xfer->queued_len[TUSB_DIR_OUT]]), len); + fsdev_write_packet_memory(pma_addr, &(edpt->buffer[xfer->queued_len[TUSB_DIR_OUT]]), len); btable_set_count(ch_id, BTABLE_BUF_TX, len); xfer->queued_len[TUSB_DIR_OUT] += len; - if (edpt->next_setup) { - // Setup packet uses IN token - edpt->next_setup = false; - ch_reg |= USB_EP_SETUP; - } - - ch_change_status(&ch_reg, TUSB_DIR_OUT, EP_STAT_VALID); - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_OUT); // only change TX Status, reserve other toggle bits - } else { btable_set_rx_bufsize(ch_id, BTABLE_BUF_RX, edpt->max_packet_size); - ch_change_status(&ch_reg, TUSB_DIR_IN, EP_STAT_VALID); - ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(TUSB_DIR_IN); // will change RX Status, reserved other toggle bits } - ch_write(ch_id, ch_reg, true); - - return true; -} - -//--------------------------------------------------------------------+ -// PMA read/write -//--------------------------------------------------------------------+ - -// Write to packet memory area (PMA) from user memory -static bool hcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes) { - if (nbytes == 0) return true; - uint32_t n_write = nbytes / FSDEV_BUS_SIZE; - - fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(dst); - const uint8_t *src8 = src; - - while (n_write--) { - pma_buf->value = fsdevbus_unaligned_read(src8); - src8 += FSDEV_BUS_SIZE; - pma_buf++; + if (edpt->low_speed == 1) { + ch_reg |= USB_CHEP_LSEP; + } else { + ch_reg &= ~USB_CHEP_LSEP; } - // Handle odd bytes - uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); - if (odd) { - fsdev_bus_t temp = 0; - for (uint16_t i = 0; i < odd; i++) { - temp |= *src8++ << (i * 8); - } - pma_buf->value = temp; + if (tu_edpt_number(edpt->ep_addr) == 0) { + edpt->pid = 1; } - return true; -} - -// Read from packet memory area (PMA) to user memory -static bool hcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes) { - if (nbytes == 0) return true; - uint32_t n_read = nbytes / FSDEV_BUS_SIZE; - - fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(src); - uint8_t *dst8 = (uint8_t *)dst; - - while (n_read--) { - fsdevbus_unaligned_write(dst8, (fsdev_bus_t) pma_buf->value); - dst8 += FSDEV_BUS_SIZE; - pma_buf++; + if (edpt->next_setup) { + // Setup packet uses IN token + edpt->next_setup = false; + ch_reg |= USB_EP_SETUP; + edpt->pid = 0; } - // Handle odd bytes - uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); - if (odd) { - fsdev_bus_t temp = pma_buf->value; - while (odd--) { - *dst8++ = (uint8_t)(temp & 0xfful); - temp >>= 8; - } - } + ch_change_status(&ch_reg, dir, EP_STAT_VALID); + ch_change_dtog(&ch_reg, dir, edpt->pid); + ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(dir) | CH_DTOG_MASK(dir); + ch_write(ch_id, ch_reg, true); return true; } diff --git a/tools/iar_template.ipcf b/tools/iar_template.ipcf index 2581a4702..caddda826 100644 --- a/tools/iar_template.ipcf +++ b/tools/iar_template.ipcf @@ -217,7 +217,9 @@ $TUSB_DIR$/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - $TUSB_DIR$/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h + $TUSB_DIR$/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c + $TUSB_DIR$/src/portable/st/stm32_fsdev/fsdev_common.c + $TUSB_DIR$/src/portable/st/stm32_fsdev/fsdev_common.h $TUSB_DIR$/src/portable/st/typec/typec_stm32.c -- cgit v1.3.1 From adcfc4bd269b93a93f4f329541351a89368cf761 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 25 Nov 2025 22:40:55 +0100 Subject: Update README.rst --- README.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.rst b/README.rst index 6a6f07825..7723935dd 100644 --- a/README.rst +++ b/README.rst @@ -229,7 +229,7 @@ Supported CPUs | +----+------------------------+--------+------+-----------+------------------------+-------------------+ | | F2, F4, F7, H7, H7RS | ✔ | ✔ | ✔ | dwc2 | | | +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | C0, G0, H5 | ✔ | | ✖ | stm32_fsdev | | +| | C0, G0, H5 | ✔ | ✔ | ✖ | stm32_fsdev | Tested on C0 | | +-----------------------------+--------+------+-----------+------------------------+-------------------+ | | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | | +----+------------------------+--------+------+-----------+------------------------+-------------------+ -- cgit v1.3.1 From a445e8c3b31629f2d14b3380c15bceb667d546b6 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 25 Nov 2025 23:02:17 +0100 Subject: hcd/fsdev: more refactor Signed-off-by: HiFiPhile --- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 123 +++++++++++++------------- 1 file changed, 61 insertions(+), 62 deletions(-) diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index b3c08ba23..2d05b2633 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -89,8 +89,7 @@ typedef struct { uint8_t ep_type; uint8_t allocated[2]; uint8_t retry[2]; - uint8_t result; -} hcd_xfer_t; +} hcd_channel_t; // Root hub port state static struct { @@ -98,7 +97,7 @@ static struct { } _hcd_port; typedef struct { - hcd_xfer_t xfer[FSDEV_EP_COUNT]; + hcd_channel_t channel[FSDEV_EP_COUNT]; hcd_endpoint_t edpt[CFG_TUH_FSDEV_ENDPOINT_MAX]; } hcd_data_t; @@ -129,8 +128,8 @@ static inline void endpoint_dealloc(hcd_endpoint_t* edpt) { edpt->allocated = 0; } -static inline void channel_dealloc(hcd_xfer_t* xfer, tusb_dir_t dir) { - xfer->allocated[dir] = 0; +static inline void channel_dealloc(hcd_channel_t* ch, tusb_dir_t dir) { + ch->allocated[dir] = 0; } // Write channel state in specified direction @@ -241,40 +240,40 @@ static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { if (ep_id == TUSB_INDEX_INVALID_8) return; hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; - hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + hcd_channel_t* channel = &_hcd_data.channel[ch_id]; if (dir == TUSB_DIR_OUT) { // OUT/TX direction - if (edpt->buflen != xfer->queued_len[TUSB_DIR_OUT]) { + if (edpt->buflen != channel->queued_len[TUSB_DIR_OUT]) { // More data to send - uint16_t const len = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); + uint16_t const len = tu_min16(edpt->buflen - channel->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_TX); - fsdev_write_packet_memory(pma_addr, &(edpt->buffer[xfer->queued_len[TUSB_DIR_OUT]]), len); + fsdev_write_packet_memory(pma_addr, &(edpt->buffer[channel->queued_len[TUSB_DIR_OUT]]), len); btable_set_count(ch_id, BTABLE_BUF_TX, len); - xfer->queued_len[TUSB_DIR_OUT] += len; + channel->queued_len[TUSB_DIR_OUT] += len; channel_write_status(ch_id, ch_reg, TUSB_DIR_OUT, EP_STAT_VALID, false); } else { // Transfer complete - channel_dealloc(xfer, TUSB_DIR_OUT); + channel_dealloc(channel, TUSB_DIR_OUT); edpt->pid = (ch_reg & USB_CHEP_DTOG_TX) ? 1 : 0; - hcd_event_xfer_complete(daddr, ep_num, xfer->queued_len[TUSB_DIR_OUT], XFER_RESULT_SUCCESS, true); + hcd_event_xfer_complete(daddr, ep_num, channel->queued_len[TUSB_DIR_OUT], XFER_RESULT_SUCCESS, true); } } else { // IN/RX direction uint16_t const rx_count = btable_get_count(ch_id, BTABLE_BUF_RX); uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_RX); - fsdev_read_packet_memory(edpt->buffer + xfer->queued_len[TUSB_DIR_IN], pma_addr, rx_count); - xfer->queued_len[TUSB_DIR_IN] += rx_count; + fsdev_read_packet_memory(edpt->buffer + channel->queued_len[TUSB_DIR_IN], pma_addr, rx_count); + channel->queued_len[TUSB_DIR_IN] += rx_count; - if ((rx_count < edpt->max_packet_size) || (xfer->queued_len[TUSB_DIR_IN] >= edpt->buflen)) { + if ((rx_count < edpt->max_packet_size) || (channel->queued_len[TUSB_DIR_IN] >= edpt->buflen)) { // Transfer complete (short packet or all bytes received) - channel_dealloc(xfer, TUSB_DIR_IN); + channel_dealloc(channel, TUSB_DIR_IN); edpt->pid = (ch_reg & USB_CHEP_DTOG_RX) ? 1 : 0; - hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, xfer->queued_len[TUSB_DIR_IN], XFER_RESULT_SUCCESS, true); + hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, channel->queued_len[TUSB_DIR_IN], XFER_RESULT_SUCCESS, true); } else { // More data expected - uint16_t const cnt = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_IN], edpt->max_packet_size); + uint16_t const cnt = tu_min16(edpt->buflen - channel->queued_len[TUSB_DIR_IN], edpt->max_packet_size); btable_set_rx_bufsize(ch_id, BTABLE_BUF_RX, cnt); channel_write_status(ch_id, ch_reg, TUSB_DIR_IN, EP_STAT_VALID, false); } @@ -302,13 +301,13 @@ static void ch_handle_stall(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { uint8_t const ep_num = ch_reg & USB_EPADDR_FIELD; uint8_t const daddr = (ch_reg & USB_CHEP_DEVADDR_Msk) >> USB_CHEP_DEVADDR_Pos; - hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; - channel_dealloc(xfer, dir); + hcd_channel_t* channel = &_hcd_data.channel[ch_id]; + channel_dealloc(channel, dir); channel_write_status(ch_id, ch_reg, dir, EP_STAT_DISABLED, false); hcd_event_xfer_complete(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0), - xfer->queued_len[dir], XFER_RESULT_STALLED, true); + channel->queued_len[dir], XFER_RESULT_STALLED, true); } // Handle error response @@ -319,21 +318,21 @@ static void ch_handle_error(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { uint8_t ep_id = endpoint_find(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0)); if (ep_id == TUSB_INDEX_INVALID_8) return; - hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; + hcd_channel_t* channel = &_hcd_data.channel[ch_id]; ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(dir); ch_reg &= ~(dir == TUSB_DIR_OUT ? USB_CH_ERRTX : USB_CH_ERRRX); - if (xfer->retry[dir] < HCD_XFER_ERROR_MAX) { + if (channel->retry[dir] < HCD_XFER_ERROR_MAX) { // Retry - xfer->retry[dir]++; + channel->retry[dir]++; ch_change_status(&ch_reg, dir, EP_STAT_VALID); } else { // Failed after retries - channel_dealloc(xfer, dir); + channel_dealloc(channel, dir); ch_change_status(&ch_reg, dir, EP_STAT_DISABLED); hcd_event_xfer_complete(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0), - xfer->queued_len[dir], XFER_RESULT_FAILED, true); + channel->queued_len[dir], XFER_RESULT_FAILED, true); } ch_write(ch_id, ch_reg, false); } @@ -341,8 +340,8 @@ static void ch_handle_error(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { // Handle CTR interrupt for the TX/OUT direction static void handle_ctr_tx(uint32_t ch_id) { uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; - hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; - TU_VERIFY(xfer->allocated[TUSB_DIR_OUT] == 1,); + hcd_channel_t* channel = &_hcd_data.channel[ch_id]; + TU_VERIFY(channel->allocated[TUSB_DIR_OUT] == 1,); if ((ch_reg & USB_CH_ERRTX) == 0U) { // No error @@ -361,8 +360,8 @@ static void handle_ctr_tx(uint32_t ch_id) { // Handle CTR interrupt for the RX/IN direction static void handle_ctr_rx(uint32_t ch_id) { uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; - hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; - TU_VERIFY(xfer->allocated[TUSB_DIR_IN] == 1,); + hcd_channel_t* channel = &_hcd_data.channel[ch_id]; + TU_VERIFY(channel->allocated[TUSB_DIR_IN] == 1,); if ((ch_reg & USB_CH_ERRRX) == 0U) { // No error @@ -579,12 +578,12 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { tusb_dir_t const dir = tu_edpt_dir(ep_addr); for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { - hcd_xfer_t* xfer = &_hcd_data.xfer[i]; + hcd_channel_t* channel = &_hcd_data.channel[i]; - if (xfer->allocated[dir] == 1 && - xfer->dev_addr == dev_addr && - xfer->ep_num == tu_edpt_number(ep_addr)) { - channel_dealloc(xfer, dir); + if (channel->allocated[dir] == 1 && + channel->dev_addr == dev_addr && + channel->ep_num == tu_edpt_number(ep_addr)) { + channel_dealloc(channel, dir); uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; channel_write_status(i, ch_reg, dir, EP_STAT_DISABLED, true); } @@ -654,14 +653,14 @@ static void edpoint_close(uint8_t ep_id) { // disable active channel belong to this endpoint for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { - hcd_xfer_t* xfer = &_hcd_data.xfer[i]; + hcd_channel_t* channel = &_hcd_data.channel[i]; uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; - if (xfer->allocated[TUSB_DIR_OUT] == 1 && xfer->edpt[TUSB_DIR_OUT] == edpt) { - channel_dealloc(xfer, TUSB_DIR_OUT); + if (channel->allocated[TUSB_DIR_OUT] == 1 && channel->edpt[TUSB_DIR_OUT] == edpt) { + channel_dealloc(channel, TUSB_DIR_OUT); channel_write_status(i, ch_reg, TUSB_DIR_OUT, EP_STAT_DISABLED, true); } - if (xfer->allocated[TUSB_DIR_IN] == 1 && xfer->edpt[TUSB_DIR_IN] == edpt) { - channel_dealloc(xfer, TUSB_DIR_IN); + if (channel->allocated[TUSB_DIR_IN] == 1 && channel->edpt[TUSB_DIR_IN] == edpt) { + channel_dealloc(channel, TUSB_DIR_IN); channel_write_status(i, ch_reg, TUSB_DIR_IN, EP_STAT_DISABLED, true); } } @@ -689,27 +688,27 @@ static uint8_t channel_alloc(uint8_t dev_addr, uint8_t ep_addr, uint8_t ep_type) // Find channel allocate for same ep_num but other direction tusb_dir_t const other_dir = (dir == TUSB_DIR_IN) ? TUSB_DIR_OUT : TUSB_DIR_IN; for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { - if (_hcd_data.xfer[i].allocated[dir] == 0 && - _hcd_data.xfer[i].allocated[other_dir] == 1 && - _hcd_data.xfer[i].dev_addr == dev_addr && - _hcd_data.xfer[i].ep_num == ep_num && - _hcd_data.xfer[i].ep_type == ep_type) { - _hcd_data.xfer[i].allocated[dir] = 1; - _hcd_data.xfer[i].queued_len[dir] = 0; - _hcd_data.xfer[i].retry[dir] = 0; + if (_hcd_data.channel[i].allocated[dir] == 0 && + _hcd_data.channel[i].allocated[other_dir] == 1 && + _hcd_data.channel[i].dev_addr == dev_addr && + _hcd_data.channel[i].ep_num == ep_num && + _hcd_data.channel[i].ep_type == ep_type) { + _hcd_data.channel[i].allocated[dir] = 1; + _hcd_data.channel[i].queued_len[dir] = 0; + _hcd_data.channel[i].retry[dir] = 0; return i; } } // Find free channel for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { - if (_hcd_data.xfer[i].allocated[0] == 0 && _hcd_data.xfer[i].allocated[1] == 0) { - _hcd_data.xfer[i].dev_addr = dev_addr; - _hcd_data.xfer[i].ep_num = ep_num; - _hcd_data.xfer[i].ep_type = ep_type; - _hcd_data.xfer[i].allocated[dir] = 1; - _hcd_data.xfer[i].queued_len[dir] = 0; - _hcd_data.xfer[i].retry[dir] = 0; + if (_hcd_data.channel[i].allocated[0] == 0 && _hcd_data.channel[i].allocated[1] == 0) { + _hcd_data.channel[i].dev_addr = dev_addr; + _hcd_data.channel[i].ep_num = ep_num; + _hcd_data.channel[i].ep_type = ep_type; + _hcd_data.channel[i].allocated[dir] = 1; + _hcd_data.channel[i].queued_len[dir] = 0; + _hcd_data.channel[i].retry[dir] = 0; return i; } } @@ -726,15 +725,15 @@ static bool edpt_xfer_kickoff(uint8_t ep_id) { tusb_dir_t const dir = tu_edpt_dir(edpt->ep_addr); - hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; - xfer->edpt[dir] = edpt; + hcd_channel_t* channel = &_hcd_data.channel[ch_id]; + channel->edpt[dir] = edpt; return channel_xfer_start(ch_id, dir); } static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir) { - hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; - hcd_endpoint_t* edpt = xfer->edpt[dir]; + hcd_channel_t* channel = &_hcd_data.channel[ch_id]; + hcd_endpoint_t* edpt = channel->edpt[dir]; uint32_t ch_reg = ch_read(ch_id) & ~USB_EPREG_MASK; ch_reg |= tu_edpt_number(edpt->ep_addr) | edpt->dev_addr << USB_CHEP_DEVADDR_Pos | @@ -763,12 +762,12 @@ static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir) { btable_set_addr(ch_id, dir == TUSB_DIR_OUT ? BTABLE_BUF_TX : BTABLE_BUF_RX, pma_addr); if (dir == TUSB_DIR_OUT) { - uint16_t const len = tu_min16(edpt->buflen - xfer->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); + uint16_t const len = tu_min16(edpt->buflen - channel->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); - fsdev_write_packet_memory(pma_addr, &(edpt->buffer[xfer->queued_len[TUSB_DIR_OUT]]), len); + fsdev_write_packet_memory(pma_addr, &(edpt->buffer[channel->queued_len[TUSB_DIR_OUT]]), len); btable_set_count(ch_id, BTABLE_BUF_TX, len); - xfer->queued_len[TUSB_DIR_OUT] += len; + channel->queued_len[TUSB_DIR_OUT] += len; } else { btable_set_rx_bufsize(ch_id, BTABLE_BUF_RX, edpt->max_packet_size); } -- cgit v1.3.1 From a965e1fa4bd92104d68ab20beb1bb56a5019e153 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Wed, 26 Nov 2025 10:36:43 +0100 Subject: Update doc Signed-off-by: Zixun LI --- README.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.rst b/README.rst index 7723935dd..ef19b0ccd 100644 --- a/README.rst +++ b/README.rst @@ -229,7 +229,7 @@ Supported CPUs | +----+------------------------+--------+------+-----------+------------------------+-------------------+ | | F2, F4, F7, H7, H7RS | ✔ | ✔ | ✔ | dwc2 | | | +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | C0, G0, H5 | ✔ | ✔ | ✖ | stm32_fsdev | Tested on C0 | +| | C0, G0, H5 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0 | | +-----------------------------+--------+------+-----------+------------------------+-------------------+ | | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | | +----+------------------------+--------+------+-----------+------------------------+-------------------+ @@ -241,9 +241,9 @@ Supported CPUs | +----+------------------------+--------+------+-----------+------------------------+-------------------+ | | U0 | ✔ | ✖ | ✖ | stm32_fsdev | | | +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | U3 | ✔ | | ✖ | stm32_fsdev | | +| | U3 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0 | | +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | U5 | 535, 545 | ✔ | | ✖ | stm32_fsdev | | +| | U5 | 535, 545 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0 | | | +------------------------+--------+------+-----------+------------------------+-------------------+ | | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | | | +------------------------+--------+------+-----------+------------------------+-------------------+ -- cgit v1.3.1 From 270e1492764959c278f1b154b8e42aef4dcd98d8 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Wed, 26 Nov 2025 14:25:06 +0100 Subject: reorganize ctr_rx workaround Signed-off-by: Zixun LI --- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 81 +++++++++++++++++---------- 1 file changed, 50 insertions(+), 31 deletions(-) diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 2d05b2633..362d7df7b 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -139,6 +139,53 @@ static inline void channel_write_status(uint8_t ch_id, uint32_t ch_reg, tusb_dir ch_write(ch_id, ch_reg, need_exclusive); } +static inline uint16_t channel_get_rx_count(uint8_t ch_id) { + /* https://www.st.com/resource/en/errata_sheet/es0561-stm32h503cbebkbrb-device-errata-stmicroelectronics.pdf + * https://www.st.com/resource/en/errata_sheet/es0587-stm32u535xx-and-stm32u545xx-device-errata-stmicroelectronics.pdf + * From H503/U535 errata: Buffer description table update completes after CTR interrupt triggers + * Description: + * - During OUT transfers, the correct transfer interrupt (CTR) is triggered a little before the last USB SRAM accesses + * have completed. If the software responds quickly to the interrupt, the full buffer contents may not be correct. + * Workaround: + * - Software should ensure that a small delay is included before accessing the SRAM contents. This delay + * should be 800 ns in Full Speed mode and 6.4 μs in Low Speed mode + * + * Note: this errata may also apply to G0, U5, H5 etc. + * + * We choose the delay count based on max CPU frequency (in MHz) to ensure the delay is at least the required time. + */ + +#if CFG_TUSB_MCU == OPT_MCU_STM32H5 + #define FREQUENCY_MHZ 250U +#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + #define FREQUENCY_MHZ 160U +#elif CFG_TUSB_MCU == OPT_MCU_STM32U3 + #define FREQUENCY_MHZ 96U +#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 + #define FREQUENCY_MHZ 64U +#elif CFG_TUSB_MCU == OPT_MCU_STM32C0 + #define FREQUENCY_MHZ 48U +#else + #error "FREQUENCY_MHZ not defined for this STM32 MCU" +#endif + + uint32_t ch_reg = ch_read(ch_id); + if (FSDEV_REG->ISTR & USB_ISTR_LS_DCONN || ch_reg & USB_CHEP_LSEP) { + // Low speed mode: 6.4 us delay -> about 2 cycles per MHz + volatile uint32_t cycle_count = FREQUENCY_MHZ * 2U; + while (cycle_count > 0U) { + cycle_count--; // each count take 3 cycles (1 for sub, jump, and compare) + } + } else { + // Full speed mode: 800 ns delay -> about 0.25 cycles per MHz + volatile uint32_t cycle_count = FREQUENCY_MHZ / 4U; + while (cycle_count > 0U) { + cycle_count--; // each count take 3 cycles (1 for sub, jump, and compare) + } + } + + return btable_get_count(ch_id, BTABLE_BUF_RX); +} //--------------------------------------------------------------------+ // Controller API @@ -175,12 +222,6 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { } FSDEV_REG->CNTR = USB_CNTR_HOST; // Enable USB in Host mode - -#if !defined(FSDEV_BUS_32BIT) - // BTABLE register does not exist on 32-bit bus devices - FSDEV_REG->BTABLE = FSDEV_BTABLE_BASE; -#endif - FSDEV_REG->ISTR = 0; // Clear pending interrupts // Reset channels to disabled @@ -260,7 +301,7 @@ static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { } } else { // IN/RX direction - uint16_t const rx_count = btable_get_count(ch_id, BTABLE_BUF_RX); + uint16_t const rx_count = channel_get_rx_count(ch_id); uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_RX); fsdev_read_packet_memory(edpt->buffer + channel->queued_len[TUSB_DIR_IN], pma_addr, rx_count); @@ -338,7 +379,7 @@ static void ch_handle_error(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { } // Handle CTR interrupt for the TX/OUT direction -static void handle_ctr_tx(uint32_t ch_id) { +static inline void handle_ctr_tx(uint32_t ch_id) { uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; hcd_channel_t* channel = &_hcd_data.channel[ch_id]; TU_VERIFY(channel->allocated[TUSB_DIR_OUT] == 1,); @@ -358,7 +399,7 @@ static void handle_ctr_tx(uint32_t ch_id) { } // Handle CTR interrupt for the RX/IN direction -static void handle_ctr_rx(uint32_t ch_id) { +static inline void handle_ctr_rx(uint32_t ch_id) { uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; hcd_channel_t* channel = &_hcd_data.channel[ch_id]; TU_VERIFY(channel->allocated[TUSB_DIR_IN] == 1,); @@ -393,28 +434,6 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { uint32_t const ch_reg = ch_read(ch_id); if (ch_reg & USB_EP_CTR_RX) { - #ifdef FSDEV_BUS_32BIT - /* https://www.st.com/resource/en/errata_sheet/es0561-stm32h503cbebkbrb-device-errata-stmicroelectronics.pdf - * https://www.st.com/resource/en/errata_sheet/es0587-stm32u535xx-and-stm32u545xx-device-errata-stmicroelectronics.pdf - * From H503/U535 errata: Buffer description table update completes after CTR interrupt triggers - * Description: - * - During OUT transfers, the correct transfer interrupt (CTR) is triggered a little before the last USB SRAM accesses - * have completed. If the software responds quickly to the interrupt, the full buffer contents may not be correct. - * Workaround: - * - Software should ensure that a small delay is included before accessing the SRAM contents. This delay - * should be 800 ns in Full Speed mode and 6.4 μs in Low Speed mode - * - Since H5 can run up to 250Mhz -> 1 cycle = 4ns. Per errata, we need to wait 200 cycles. Though executing code - * also takes time, so we'll wait 60 cycles (count = 20). - * - Since Low Speed mode is not supported/popular, we will ignore it for now. - * - * Note: this errata may also apply to G0, U5, H5 etc. - */ - volatile uint32_t cycle_count = 20; // defined as PCD_RX_PMA_CNT in stm32 hal_driver - while (cycle_count > 0U) { - cycle_count--; // each count take 3 cycles (1 for sub, jump, and compare) - } - #endif - ch_write_clear_ctr(ch_id, TUSB_DIR_IN); handle_ctr_rx(ch_id); } -- cgit v1.3.1 From c05d809e3eb9364e4db9f9997dc51dde169ed2c5 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 26 Nov 2025 23:06:15 +0100 Subject: usbh: Stop enumeration gracefully if EP0 can't be open Signed-off-by: HiFiPhile --- src/host/usbh.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index 734024771..5fea5fa9f 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -1575,7 +1575,11 @@ static void process_enumeration(tuh_xfer_t* xfer) { // TODO probably doesn't need to open/close each enumeration uint8_t const addr0 = 0; - TU_ASSERT(usbh_edpt_control_open(addr0, 8),); + if (!usbh_edpt_control_open(addr0, 8)) { + // Stop enumeration gracefully + enum_full_complete(false); + TU_ASSERT(false,); + } // Get first 8 bytes of device descriptor for control endpoint size TU_LOG_USBH("Get 8 byte of Device Descriptor\r\n"); @@ -1613,7 +1617,12 @@ static void process_enumeration(tuh_xfer_t* xfer) { usbh_device_close(dev0_bus->rhport, 0); // close dev0 - TU_ASSERT(usbh_edpt_control_open(new_addr, new_dev->bMaxPacketSize0),); // open new control endpoint + if (!usbh_edpt_control_open(new_addr, new_dev->bMaxPacketSize0)) { // open new control endpoint + // Stop enumeration gracefully + clear_device(new_dev); + enum_full_complete(false); + TU_ASSERT(false,); + } TU_LOG_USBH("Get Device Descriptor\r\n"); TU_ASSERT(tuh_descriptor_get_device(new_addr, _usbh_epbuf.ctrl, sizeof(tusb_desc_device_t), -- cgit v1.3.1 From 66ab814520476a03d962aaec880e6c8c1b9de225 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 26 Nov 2025 23:09:29 +0100 Subject: usbh: watch hub status before driver config Signed-off-by: HiFiPhile --- src/host/usbh.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index 5fea5fa9f..c655702bd 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -1420,7 +1420,7 @@ enum { static uint8_t enum_get_new_address(bool is_hub); static bool enum_parse_configuration_desc (uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg); -static void enum_full_complete(void); +static void enum_full_complete(bool success); static void process_enumeration(tuh_xfer_t* xfer); // start a new enumeration process @@ -1442,7 +1442,7 @@ static bool enum_new_device(hcd_event_t* event) { if (!hcd_port_connect_status(dev0_bus->rhport)) { TU_LOG_USBH("Device unplugged while debouncing\r\n"); - enum_full_complete(); + enum_full_complete(false); return true; } @@ -1453,7 +1453,7 @@ static bool enum_new_device(hcd_event_t* event) { if (!hcd_port_connect_status(dev0_bus->rhport)) { // device unplugged while delaying - enum_full_complete(); + enum_full_complete(false); return true; } @@ -1499,7 +1499,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { } if (!retry) { - enum_full_complete(); // complete as failed + enum_full_complete(false); // complete as failed } return; } @@ -1522,7 +1522,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { if (0 == port_status.status.connection) { TU_LOG_USBH("Device unplugged from hub while debouncing\r\n"); - enum_full_complete(); + enum_full_complete(false); return; } @@ -1559,7 +1559,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { if (0 == port_status.status.connection) { TU_LOG_USBH("Device unplugged from hub (not addressed yet)\r\n"); - enum_full_complete(); + enum_full_complete(false); return; } @@ -1776,6 +1776,12 @@ static void process_enumeration(tuh_xfer_t* xfer) { TU_LOG_USBH("Device configured\r\n"); dev->configured = 1; + #if CFG_TUH_HUB + if (_usbh_data.dev0_bus.hub_addr != 0) { + hub_edpt_status_xfer(_usbh_data.dev0_bus.hub_addr); // get next hub status + } + #endif + // Parse configuration & set up drivers // driver_open() must not make any usb transfer TU_ASSERT(enum_parse_configuration_desc(daddr, (tusb_desc_configuration_t*) _usbh_epbuf.ctrl),); @@ -1789,7 +1795,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { } default: - enum_full_complete(); // stop enumeration if unknown state + enum_full_complete(false); // stop enumeration if unknown state break; } } @@ -1926,7 +1932,7 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { // all interface are configured if (itf_num == CFG_TUH_INTERFACE_MAX) { - enum_full_complete(); + enum_full_complete(true); if (is_hub_addr(dev_addr)) { TU_LOG_USBH("HUB address = %u is mounted\r\n", dev_addr); @@ -1937,14 +1943,17 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { } } -static void enum_full_complete(void) { +static void enum_full_complete(bool success) { // mark enumeration as complete _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; #if CFG_TUH_HUB - if (_usbh_data.dev0_bus.hub_addr != 0) { + // Hub status is already requested in case of successful enumeration + if (_usbh_data.dev0_bus.hub_addr != 0 && !success) { hub_edpt_status_xfer(_usbh_data.dev0_bus.hub_addr); // get next hub status } +#else + (void) success; #endif } -- cgit v1.3.1 From 5d56828e43ef5f894c4586e7e7a61c3fbbbbfaf9 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Thu, 27 Nov 2025 11:02:49 +0100 Subject: extract core reset Signed-off-by: Zixun LI --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 18 +-------------- src/portable/st/stm32_fsdev/fsdev_common.c | 32 ++++++++++++++++++++++++++- src/portable/st/stm32_fsdev/fsdev_common.h | 6 ++++- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 19 +--------------- 4 files changed, 38 insertions(+), 37 deletions(-) diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index a6c8d2453..3c4e4fc9b 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -173,23 +173,9 @@ TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint8_t epnum, uint //--------------------------------------------------------------------+ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rh_init; - // Follow the RM mentions to use a special ordering of PDWN and FRES - for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us - asm("NOP"); - } - - // Perform USB peripheral reset - FSDEV_REG->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; - for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us - asm("NOP"); - } - FSDEV_REG->CNTR &= ~USB_CNTR_PDWN; + fsdev_core_reset(); - // Wait startup time, for F042 and F070, this is <= 1 us. - for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us - asm("NOP"); - } FSDEV_REG->CNTR = 0; // Enable USB #if !defined(FSDEV_BUS_32BIT) @@ -197,8 +183,6 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { FSDEV_REG->BTABLE = FSDEV_BTABLE_BASE; #endif - FSDEV_REG->ISTR = 0; // Clear pending interrupts - // Reset endpoints to disabled for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { // This doesn't clear all bits since some bits are "toggle", but does set the type to DISABLED. diff --git a/src/portable/st/stm32_fsdev/fsdev_common.c b/src/portable/st/stm32_fsdev/fsdev_common.c index d021a6abf..5c7df6809 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.c +++ b/src/portable/st/stm32_fsdev/fsdev_common.c @@ -31,6 +31,35 @@ #include "fsdev_common.h" +//--------------------------------------------------------------------+ +// Global +//--------------------------------------------------------------------+ + +// Reset the USB Core +void fsdev_core_reset(void) { + // Follow the RM mentions to use a special ordering of PDWN and FRES + for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us + asm("NOP"); + } + + // Perform USB peripheral reset + FSDEV_REG->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; + for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us + asm("NOP"); + } + + FSDEV_REG->CNTR &= ~USB_CNTR_PDWN; + + // Wait startup time, for F042 and F070, this is <= 1 us. + for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us + asm("NOP"); + } + + // Clear pending interrupts + FSDEV_REG->ISTR = 0; +} + + //--------------------------------------------------------------------+ // PMA read/write //--------------------------------------------------------------------+ @@ -199,7 +228,7 @@ bool fsdev_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes) // BTable Helper //--------------------------------------------------------------------+ -/* Aligned buffer size according to hardware */ +// Aligned buffer size according to hardware uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block) { /* The STM32 full speed USB peripheral supports only a limited set of * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ @@ -217,6 +246,7 @@ uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_bloc return (*num_block) * block_in_bytes; } +// Set RX buffer size void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint16_t wCount) { uint8_t blsize, num_block; (void) pma_align_buffer_size(wCount, &blsize, &num_block); diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index e363245ec..9cf61031d 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -311,9 +311,13 @@ TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_ #endif } -/* Aligned buffer size according to hardware */ +// Reset the USB Core +void fsdev_core_reset(void); + +// Aligned buffer size according to hardware uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block); +// Set RX buffer size void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint16_t wCount); //--------------------------------------------------------------------+ diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 362d7df7b..168366058 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -203,26 +203,9 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rh_init; - // Follow the RM mentions to use a special ordering of PDWN and FRES - for (volatile uint32_t i = 0; i < 200; i++) { - asm("NOP"); - } - - // Perform USB peripheral reset - FSDEV_REG->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; - for (volatile uint32_t i = 0; i < 200; i++) { - asm("NOP"); - } - - FSDEV_REG->CNTR &= ~USB_CNTR_PDWN; - - // Wait startup time - for (volatile uint32_t i = 0; i < 200; i++) { - asm("NOP"); - } + fsdev_core_reset(); FSDEV_REG->CNTR = USB_CNTR_HOST; // Enable USB in Host mode - FSDEV_REG->ISTR = 0; // Clear pending interrupts // Reset channels to disabled for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { -- cgit v1.3.1 From 9742ba734f8ef780fb2b4c94848c4bd534afdafe Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Thu, 27 Nov 2025 11:34:37 +0100 Subject: Add fsdev_deinit Signed-off-by: Zixun LI --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 8 ++++++++ src/portable/st/stm32_fsdev/fsdev_common.c | 15 +++++++++++++++ src/portable/st/stm32_fsdev/fsdev_common.h | 3 +++ src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 8 ++++++++ 4 files changed, 34 insertions(+) diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 3c4e4fc9b..351916147 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -199,6 +199,14 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { return true; } +bool dcd_deinit(uint8_t rhport) { + (void)rhport; + + fsdev_deinit(); + + return true; +} + void dcd_sof_enable(uint8_t rhport, bool en) { (void)rhport; diff --git a/src/portable/st/stm32_fsdev/fsdev_common.c b/src/portable/st/stm32_fsdev/fsdev_common.c index 5c7df6809..d0f3460b6 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.c +++ b/src/portable/st/stm32_fsdev/fsdev_common.c @@ -59,6 +59,21 @@ void fsdev_core_reset(void) { FSDEV_REG->ISTR = 0; } +// De-initialize the USB Core +void fsdev_deinit(void) { + // Disable all interrupts and force USB reset + FSDEV_REG->CNTR = USB_CNTR_FRES; + + // Clear pending interrupts + FSDEV_REG->ISTR = 0; + + // Put USB peripheral in power down mode + FSDEV_REG->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; + for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us + asm("NOP"); + } +} + //--------------------------------------------------------------------+ // PMA read/write diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 9cf61031d..0c67ee0c7 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -314,6 +314,9 @@ TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_ // Reset the USB Core void fsdev_core_reset(void); +// De-initialize the USB Core +void fsdev_deinit(void); + // Aligned buffer size according to hardware uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block); diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 168366058..39b9ac2d3 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -226,6 +226,14 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { return true; } +bool hcd_deinit(uint8_t rhport) { + (void)rhport; + + fsdev_deinit(); + + return true; +} + static void port_status_handler(uint8_t rhport, bool in_isr) { uint32_t const fnr_reg = FSDEV_REG->FNR; uint32_t const istr_reg = FSDEV_REG->ISTR; -- cgit v1.3.1 From a25e9e86c83785e8ce91b1c7b485a106195d368a Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Thu, 27 Nov 2025 11:35:25 +0100 Subject: Remove redundant EP reg clear Signed-off-by: Zixun LI --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 10 +++------- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 5 ----- 2 files changed, 3 insertions(+), 12 deletions(-) diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 351916147..087639d4b 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -183,14 +183,10 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { FSDEV_REG->BTABLE = FSDEV_BTABLE_BASE; #endif - // Reset endpoints to disabled - for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { - // This doesn't clear all bits since some bits are "toggle", but does set the type to DISABLED. - ep_write(i, 0u, false); - } - + // Enable interrupts for device mode FSDEV_REG->CNTR |= USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | - USB_CNTR_SUSPM | USB_CNTR_WKUPM | USB_CNTR_PMAOVRM; + USB_CNTR_SUSPM | USB_CNTR_WKUPM | USB_CNTR_PMAOVRM; + handle_bus_reset(rhport); // Enable pull-up if supported diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 39b9ac2d3..00c71ce6c 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -207,11 +207,6 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { FSDEV_REG->CNTR = USB_CNTR_HOST; // Enable USB in Host mode - // Reset channels to disabled - for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { - ch_write(i, 0u, false); - } - tu_memclr(&_hcd_data, sizeof(_hcd_data)); // Enable interrupts for host mode -- cgit v1.3.1 From b997ec725812d2f6a573610ba0dd817f271eddea Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Thu, 27 Nov 2025 11:49:30 +0100 Subject: usbd: clear state and call callback on deinit Signed-off-by: Zixun LI --- src/device/usbd.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/src/device/usbd.c b/src/device/usbd.c index d4dfae4b4..f923dfe08 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -587,6 +587,10 @@ bool tud_deinit(uint8_t rhport) { } } + // Clear device data + tu_varclr(&_usbd_dev); + usbd_control_reset(); + // Deinit device queue & task osal_queue_delete(_usbd_q); _usbd_q = NULL; @@ -598,6 +602,9 @@ bool tud_deinit(uint8_t rhport) { #endif _usbd_rhport = RHPORT_INVALID; + + tud_umount_cb(); + return true; } -- cgit v1.3.1 From 8914f402e5cdf372ade2ed1f4053ce14feffbeda Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Thu, 27 Nov 2025 12:10:27 +0100 Subject: free previously allocated OUT endpoint if IN allocation failed Signed-off-by: Zixun LI --- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 00c71ce6c..7d3deba34 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -516,7 +516,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const uint8_t const ep_type = ep_desc->bmAttributes.xfer; uint8_t const ep_id = endpoint_alloc(); - TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + TU_ASSERT(ep_id != TUSB_INDEX_INVALID_8); hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; edpt->dev_addr = dev_addr; @@ -530,7 +530,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const // EP0 is bi-directional, so we need to open both OUT and IN channels if (ep_addr == 0) { uint8_t const ep_id_in = endpoint_alloc(); - TU_ASSERT(ep_id_in < CFG_TUH_FSDEV_ENDPOINT_MAX); + if (ep_id_in == TUSB_INDEX_INVALID_8) { + // free previously allocated OUT endpoint + endpoint_dealloc(edpt); + TU_ASSERT(false); + } _hcd_data.edpt[ep_id_in] = *edpt; // copy from OUT endpoint _hcd_data.edpt[ep_id_in].ep_addr = 0 | TUSB_DIR_IN_MASK; @@ -543,13 +547,13 @@ bool hcd_edpt_close(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { (void) rhport; uint8_t const ep_id = endpoint_find(dev_addr, ep_addr); - TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + TU_ASSERT(ep_id != TUSB_INDEX_INVALID_8); edpoint_close(ep_id); if (ep_addr == 0) { uint8_t const ep_id_in = endpoint_find(dev_addr, 0 | TUSB_DIR_IN_MASK); - TU_ASSERT(ep_id_in < CFG_TUH_FSDEV_ENDPOINT_MAX); + TU_ASSERT(ep_id_in != TUSB_INDEX_INVALID_8); edpoint_close(ep_id_in); } @@ -564,7 +568,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b TU_LOG(FSDEV_DEBUG, "hcd_edpt_xfer addr=%u ep=0x%02X len=%u\r\n", dev_addr, ep_addr, buflen); uint8_t const ep_id = endpoint_find(dev_addr, ep_addr); - TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + TU_ASSERT(ep_id != TUSB_INDEX_INVALID_8); hcd_endpoint_t *edpt = &_hcd_data.edpt[ep_id]; @@ -579,7 +583,7 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { (void) rhport; uint8_t const ep_id = endpoint_find(dev_addr, ep_addr); - TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + TU_ASSERT(ep_id != TUSB_INDEX_INVALID_8); tusb_dir_t const dir = tu_edpt_dir(ep_addr); for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { @@ -602,7 +606,7 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet (void) rhport; uint8_t const ep_id = endpoint_find(dev_addr, 0); - TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + TU_ASSERT(ep_id != TUSB_INDEX_INVALID_8); hcd_endpoint_t *edpt = &_hcd_data.edpt[ep_id]; edpt->next_setup = true; @@ -618,7 +622,7 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { (void) ep_addr; uint8_t const ep_id = endpoint_find(dev_addr, 0); - TU_ASSERT(ep_id < CFG_TUH_FSDEV_ENDPOINT_MAX); + TU_ASSERT(ep_id != TUSB_INDEX_INVALID_8); hcd_endpoint_t *edpt = &_hcd_data.edpt[ep_id]; edpt->pid = 0; -- cgit v1.3.1 From e5d775def8927c564c8679f020a02e04d6676d3a Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 27 Nov 2025 19:11:21 +0100 Subject: usbh: detach existing device first if an attach event is received Signed-off-by: HiFiPhile --- src/host/usbh.c | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index c655702bd..55042b972 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -312,6 +312,7 @@ TU_ATTR_ALWAYS_INLINE static inline usbh_class_driver_t const *get_driver(uint8_ // Function Inline and Prototypes //--------------------------------------------------------------------+ static bool enum_new_device(hcd_event_t* event); +static void process_detach_event(hcd_event_t* event); static void process_removed_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port); static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); @@ -605,6 +606,11 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { switch (event.event_id) { case HCD_EVENT_DEVICE_ATTACH: + // We have likely missed the hub detach event due to high traffic, detach the device first if exists + // Or due to physical debouncing, some devices can cause multiple attaches (actually reset) without detach event + // Force remove currently mounted with the same bus info (rhport, hub addr, hub port) if exists + process_detach_event(&event); + // due to the shared control buffer, we must fully complete enumerating one device first. // TODO better to have an separated queue for newly attached devices if (_usbh_data.enumerating_daddr == TUSB_INDEX_INVALID_8) { @@ -625,15 +631,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { case HCD_EVENT_DEVICE_REMOVE: TU_LOG_USBH("[%u:%u:%u] USBH DEVICE REMOVED\r\n", event.rhport, event.connection.hub_addr, event.connection.hub_port); - if (_usbh_data.enumerating_daddr == 0 && - event.rhport == _usbh_data.dev0_bus.rhport && - event.connection.hub_addr == _usbh_data.dev0_bus.hub_addr && - event.connection.hub_port == _usbh_data.dev0_bus.hub_port) { - // dev0 is unplugged while enumerating (not yet assigned an address) - usbh_device_close(_usbh_data.dev0_bus.rhport, 0); - } else { - process_removed_device(event.rhport, event.connection.hub_addr, event.connection.hub_port); - } + process_detach_event(&event); break; case HCD_EVENT_XFER_COMPLETE: { @@ -1314,6 +1312,20 @@ bool tuh_interface_set(uint8_t daddr, uint8_t itf_num, uint8_t itf_alt, //--------------------------------------------------------------------+ // Detaching //--------------------------------------------------------------------+ + +// process detach event from rhport:hub_addr:hub_port +static void process_detach_event(hcd_event_t* event) { + if (_usbh_data.enumerating_daddr == 0 && + event->rhport == _usbh_data.dev0_bus.rhport && + event->connection.hub_addr == _usbh_data.dev0_bus.hub_addr && + event->connection.hub_port == _usbh_data.dev0_bus.hub_port) { + // dev0 is unplugged while enumerating (not yet assigned an address) + usbh_device_close(_usbh_data.dev0_bus.rhport, 0); + } else { + process_removed_device(event->rhport, event->connection.hub_addr, event->connection.hub_port); + } +} + // a device unplugged from rhport:hub_addr:hub_port static void process_removed_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port) { // Find the all devices (star-network) under port that is unplugged @@ -1589,10 +1601,6 @@ static void process_enumeration(tuh_xfer_t* xfer) { } case ENUM_SET_ADDR: { - // Due to physical debouncing, some devices can cause multiple attaches (actually reset) without detach event - // Force remove currently mounted with the same bus info (rhport, hub addr, hub port) if exists - process_removed_device(dev0_bus->rhport, dev0_bus->hub_addr, dev0_bus->hub_port); - const tusb_desc_device_t *desc_device = (const tusb_desc_device_t *) _usbh_epbuf.ctrl; const uint8_t new_addr = enum_get_new_address(desc_device->bDeviceClass == TUSB_CLASS_HUB); TU_ASSERT(new_addr != 0,); -- cgit v1.3.1 From 07ff25eb1e9871082b92161296725c5d312d3558 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Thu, 27 Nov 2025 17:17:03 +0100 Subject: Add max nak config Signed-off-by: Zixun LI --- src/host/usbh.h | 9 +- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 203 +++++++++++++++++--------- 2 files changed, 140 insertions(+), 72 deletions(-) diff --git a/src/host/usbh.h b/src/host/usbh.h index 4b6747848..697c911ff 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -95,18 +95,23 @@ enum { TUH_CFGID_INVALID = 0, TUH_CFGID_RPI_PIO_USB_CONFIGURATION = 100, // cfg_param: pio_usb_configuration_t TUH_CFGID_MAX3421 = 200, + TUH_CFGID_FSDEV = 300, }; typedef struct { - uint8_t max_nak; // max NAK per endpoint per frame to save CPU/SPI bus usage + uint8_t max_nak; // max NAK per endpoint per frame to save CPU/SPI bus usage (0=unlimited) uint8_t cpuctl; // R16: CPU Control Register uint8_t pinctl; // R17: Pin Control Register. FDUPSPI bit is ignored } tuh_configure_max3421_t; +typedef struct { + uint8_t max_nak; // max NAK per endpoint per frame to save CPU usage (0=unlimited) +} tuh_configure_fsdev_t; + typedef union { // For TUH_CFGID_RPI_PIO_USB_CONFIGURATION use pio_usb_configuration_t - tuh_configure_max3421_t max3421; + tuh_configure_fsdev_t fsdev; } tuh_configure_param_t; //--------------------------------------------------------------------+ diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 7d3deba34..ff2f2946e 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -60,48 +60,56 @@ TU_VERIFY_STATIC(CFG_TUH_FSDEV_ENDPOINT_MAX <= 255, "currently only use 8-bit for index"); enum { - HCD_XFER_ERROR_MAX = 3 + HCD_XFER_ERROR_MAX = 3, + HCD_XFER_NAK_MAX = 15, + HCD_XFER_NAK_DEFAULT = 3, }; // Host driver struct for each opened endpoint typedef struct { uint8_t *buffer; uint16_t buflen; + uint16_t queued_len; uint16_t max_packet_size; uint8_t dev_addr; uint8_t ep_addr; uint8_t ep_type; uint8_t interval; struct TU_ATTR_PACKED { - uint8_t low_speed : 1; + uint8_t ls_pre : 1; uint8_t allocated : 1; uint8_t next_setup : 1; uint8_t pid : 1; }; } hcd_endpoint_t; +// Channel direction state +typedef struct { + hcd_endpoint_t* edpt; + struct TU_ATTR_PACKED { + uint8_t allocated : 1; + uint8_t retry : 3; + uint8_t nak : 4; // Max NAK count in current frame + }; +} hcd_channel_dir_t; + // Additional info for each channel when it is active typedef struct { - hcd_endpoint_t* edpt[2]; // OUT/IN - uint16_t queued_len[2]; uint8_t dev_addr; uint8_t ep_num; uint8_t ep_type; - uint8_t allocated[2]; - uint8_t retry[2]; + hcd_channel_dir_t out, in; } hcd_channel_t; -// Root hub port state static struct { - bool connected; -} _hcd_port; - -typedef struct { hcd_channel_t channel[FSDEV_EP_COUNT]; hcd_endpoint_t edpt[CFG_TUH_FSDEV_ENDPOINT_MAX]; -} hcd_data_t; + bool connected; +} _hcd_data; -hcd_data_t _hcd_data; +static tuh_configure_fsdev_t _tuh_cfg = { + .max_nak = HCD_XFER_NAK_DEFAULT, +}; //--------------------------------------------------------------------+ // Prototypes @@ -114,7 +122,6 @@ static uint8_t channel_alloc(uint8_t dev_addr, uint8_t ep_addr, uint8_t ep_type) static bool edpt_xfer_kickoff(uint8_t ep_id); static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir); static void edpoint_close(uint8_t ep_id); -static void port_status_handler(uint8_t rhport, bool in_isr); static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); static void ch_handle_nak(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); static void ch_handle_stall(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); @@ -129,7 +136,11 @@ static inline void endpoint_dealloc(hcd_endpoint_t* edpt) { } static inline void channel_dealloc(hcd_channel_t* ch, tusb_dir_t dir) { - ch->allocated[dir] = 0; + if (dir == TUSB_DIR_OUT) { + ch->out.allocated = 0; + } else { + ch->in.allocated = 0; + } } // Write channel state in specified direction @@ -194,9 +205,11 @@ static inline uint16_t channel_get_rx_count(uint8_t ch_id) { // Optional HCD configuration, called by tuh_configure() bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { (void) rhport; - (void) cfg_id; - (void) cfg_param; - return false; + TU_VERIFY(cfg_id == TUH_CFGID_FSDEV && cfg_param != NULL); + + tuh_configure_param_t const* cfg = (tuh_configure_param_t const*) cfg_param; + _tuh_cfg.max_nak = tu_min8(cfg->fsdev.max_nak, HCD_XFER_NAK_MAX); + return true; } // Initialize controller to host mode @@ -210,11 +223,11 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_memclr(&_hcd_data, sizeof(_hcd_data)); // Enable interrupts for host mode - FSDEV_REG->CNTR |= USB_CNTR_RESETM | USB_CNTR_CTRM | USB_CNTR_SUSPM | + FSDEV_REG->CNTR |= USB_CNTR_RESETM | USB_CNTR_CTRM | USB_CNTR_SOFM | USB_CNTR_SUSPM | USB_CNTR_WKUPM | USB_CNTR_ERRM | USB_CNTR_PMAOVRM; // Initialize port state - _hcd_port.connected = false; + _hcd_data.connected = false; fsdev_connect(rhport); @@ -229,35 +242,48 @@ bool hcd_deinit(uint8_t rhport) { return true; } -static void port_status_handler(uint8_t rhport, bool in_isr) { +//--------------------------------------------------------------------+ +// Interrupt Helper Functions +//--------------------------------------------------------------------+ + +static inline void sof_handler(void) { + // Reset NAK counters for all active channels + for (uint8_t ch_id = 0; ch_id < FSDEV_EP_COUNT; ch_id++) { + hcd_channel_t* channel = &_hcd_data.channel[ch_id]; + if (channel->out.allocated) { + channel->out.nak = 0; + } + if (channel->in.allocated) { + channel->in.nak = 0; + } + } +} + +static inline void port_status_handler(uint8_t rhport, bool in_isr) { uint32_t const fnr_reg = FSDEV_REG->FNR; uint32_t const istr_reg = FSDEV_REG->ISTR; // SE0 detected USB Disconnected state if ((fnr_reg & (USB_FNR_RXDP | USB_FNR_RXDM)) == 0U) { - _hcd_port.connected = false; + _hcd_data.connected = false; hcd_event_device_remove(rhport, in_isr); return; } - if (!_hcd_port.connected) { + if (!_hcd_data.connected) { // J-state or K-state detected & LastState=Disconnected if (((fnr_reg & USB_FNR_RXDP) != 0U) || ((istr_reg & USB_ISTR_LS_DCONN) != 0U)) { - _hcd_port.connected = true; + _hcd_data.connected = true; hcd_event_device_attach(rhport, in_isr); } } else { // J-state or K-state detected & lastState=Connected: a Missed disconnection is detected if (((fnr_reg & USB_FNR_RXDP) != 0U) || ((istr_reg & USB_ISTR_LS_DCONN) != 0U)) { - _hcd_port.connected = false; + _hcd_data.connected = false; hcd_event_device_remove(rhport, in_isr); } } } -//--------------------------------------------------------------------+ -// Interrupt Helper Functions -//--------------------------------------------------------------------+ - // Handle ACK response static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { uint8_t const ep_num = ch_reg & USB_EPADDR_FIELD; @@ -271,38 +297,40 @@ static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { if (dir == TUSB_DIR_OUT) { // OUT/TX direction - if (edpt->buflen != channel->queued_len[TUSB_DIR_OUT]) { + if (edpt->buflen != edpt->queued_len) { // More data to send - uint16_t const len = tu_min16(edpt->buflen - channel->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); + uint16_t const len = tu_min16(edpt->buflen - edpt->queued_len, edpt->max_packet_size); uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_TX); - fsdev_write_packet_memory(pma_addr, &(edpt->buffer[channel->queued_len[TUSB_DIR_OUT]]), len); + fsdev_write_packet_memory(pma_addr, &(edpt->buffer[edpt->queued_len]), len); btable_set_count(ch_id, BTABLE_BUF_TX, len); - channel->queued_len[TUSB_DIR_OUT] += len; + edpt->queued_len += len; channel_write_status(ch_id, ch_reg, TUSB_DIR_OUT, EP_STAT_VALID, false); + channel->out.nak = 0; } else { // Transfer complete channel_dealloc(channel, TUSB_DIR_OUT); edpt->pid = (ch_reg & USB_CHEP_DTOG_TX) ? 1 : 0; - hcd_event_xfer_complete(daddr, ep_num, channel->queued_len[TUSB_DIR_OUT], XFER_RESULT_SUCCESS, true); + hcd_event_xfer_complete(daddr, ep_num, edpt->queued_len, XFER_RESULT_SUCCESS, true); } } else { // IN/RX direction uint16_t const rx_count = channel_get_rx_count(ch_id); uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_RX); - fsdev_read_packet_memory(edpt->buffer + channel->queued_len[TUSB_DIR_IN], pma_addr, rx_count); - channel->queued_len[TUSB_DIR_IN] += rx_count; + fsdev_read_packet_memory(edpt->buffer + edpt->queued_len, pma_addr, rx_count); + edpt->queued_len += rx_count; - if ((rx_count < edpt->max_packet_size) || (channel->queued_len[TUSB_DIR_IN] >= edpt->buflen)) { + if ((rx_count < edpt->max_packet_size) || (edpt->queued_len >= edpt->buflen)) { // Transfer complete (short packet or all bytes received) channel_dealloc(channel, TUSB_DIR_IN); edpt->pid = (ch_reg & USB_CHEP_DTOG_RX) ? 1 : 0; - hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, channel->queued_len[TUSB_DIR_IN], XFER_RESULT_SUCCESS, true); + hcd_event_xfer_complete(daddr, ep_num | TUSB_DIR_IN_MASK, edpt->queued_len, XFER_RESULT_SUCCESS, true); } else { // More data expected - uint16_t const cnt = tu_min16(edpt->buflen - channel->queued_len[TUSB_DIR_IN], edpt->max_packet_size); + uint16_t const cnt = tu_min16(edpt->buflen - edpt->queued_len, edpt->max_packet_size); btable_set_rx_bufsize(ch_id, BTABLE_BUF_RX, cnt); channel_write_status(ch_id, ch_reg, TUSB_DIR_IN, EP_STAT_VALID, false); + channel->in.nak = 0; } } } @@ -316,10 +344,17 @@ static void ch_handle_nak(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { if (ep_id == TUSB_INDEX_INVALID_8) return; hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; - // Retry non-periodic transfer immediately, + // Retry non-periodic transfer immediately if NAK count not exceeded // Periodic transfer will be retried by next frame automatically if (edpt->ep_type == TUSB_XFER_CONTROL || edpt->ep_type == TUSB_XFER_BULK) { - channel_write_status(ch_id, ch_reg, dir, EP_STAT_VALID, false); + hcd_channel_dir_t* channel_dir = + (dir == TUSB_DIR_OUT) ? &(_hcd_data.channel[ch_id].out) : &(_hcd_data.channel[ch_id].in); + if (channel_dir->nak < HCD_XFER_NAK_MAX) { + channel_dir->nak++; + } + if (channel_dir->nak < _tuh_cfg.max_nak || _tuh_cfg.max_nak == 0) { + channel_write_status(ch_id, ch_reg, dir, EP_STAT_VALID, false); + } } } @@ -328,13 +363,17 @@ static void ch_handle_stall(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { uint8_t const ep_num = ch_reg & USB_EPADDR_FIELD; uint8_t const daddr = (ch_reg & USB_CHEP_DEVADDR_Msk) >> USB_CHEP_DEVADDR_Pos; + uint8_t ep_id = endpoint_find(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0)); + if (ep_id == TUSB_INDEX_INVALID_8) return; + + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; hcd_channel_t* channel = &_hcd_data.channel[ch_id]; channel_dealloc(channel, dir); channel_write_status(ch_id, ch_reg, dir, EP_STAT_DISABLED, false); hcd_event_xfer_complete(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0), - channel->queued_len[dir], XFER_RESULT_STALLED, true); + edpt->queued_len, XFER_RESULT_STALLED, true); } // Handle error response @@ -345,21 +384,24 @@ static void ch_handle_error(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { uint8_t ep_id = endpoint_find(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0)); if (ep_id == TUSB_INDEX_INVALID_8) return; + hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; hcd_channel_t* channel = &_hcd_data.channel[ch_id]; ch_reg &= USB_EPREG_MASK | CH_STAT_MASK(dir); ch_reg &= ~(dir == TUSB_DIR_OUT ? USB_CH_ERRTX : USB_CH_ERRRX); - if (channel->retry[dir] < HCD_XFER_ERROR_MAX) { + hcd_channel_dir_t* channel_dir = + (dir == TUSB_DIR_OUT) ? &(_hcd_data.channel[ch_id].out) : &(_hcd_data.channel[ch_id].in); + if (channel_dir->retry < HCD_XFER_ERROR_MAX) { // Retry - channel->retry[dir]++; + channel_dir->retry++; ch_change_status(&ch_reg, dir, EP_STAT_VALID); } else { // Failed after retries channel_dealloc(channel, dir); ch_change_status(&ch_reg, dir, EP_STAT_DISABLED); hcd_event_xfer_complete(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0), - channel->queued_len[dir], XFER_RESULT_FAILED, true); + edpt->queued_len, XFER_RESULT_FAILED, true); } ch_write(ch_id, ch_reg, false); } @@ -368,7 +410,7 @@ static void ch_handle_error(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { static inline void handle_ctr_tx(uint32_t ch_id) { uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; hcd_channel_t* channel = &_hcd_data.channel[ch_id]; - TU_VERIFY(channel->allocated[TUSB_DIR_OUT] == 1,); + TU_VERIFY(channel->out.allocated == 1,); if ((ch_reg & USB_CH_ERRTX) == 0U) { // No error @@ -388,7 +430,7 @@ static inline void handle_ctr_tx(uint32_t ch_id) { static inline void handle_ctr_rx(uint32_t ch_id) { uint32_t ch_reg = ch_read(ch_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; hcd_channel_t* channel = &_hcd_data.channel[ch_id]; - TU_VERIFY(channel->allocated[TUSB_DIR_IN] == 1,); + TU_VERIFY(channel->in.allocated == 1,); if ((ch_reg & USB_CH_ERRRX) == 0U) { // No error @@ -408,7 +450,13 @@ static inline void handle_ctr_rx(uint32_t ch_id) { void hcd_int_handler(uint8_t rhport, bool in_isr) { uint32_t int_status = FSDEV_REG->ISTR; - /* Port Change Detected (Connection/Disconnection) */ + // Start of Frame + if (int_status & USB_ISTR_SOF) { + FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_SOF; + sof_handler(); + } + + // Port Change Detected (Connection/Disconnection) if (int_status & USB_ISTR_DCON) { FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_DCON; port_status_handler(rhport, in_isr); @@ -464,7 +512,7 @@ uint32_t hcd_frame_number(uint8_t rhport) { // Get the current connect status of roothub port bool hcd_port_connect_status(uint8_t rhport) { (void) rhport; - return _hcd_port.connected; + return _hcd_data.connected; } // Reset USB bus on the port @@ -525,7 +573,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const edpt->max_packet_size = packet_size; edpt->interval = ep_desc->bInterval; edpt->pid = 0; - edpt->low_speed = (hcd_port_speed_get(rhport) == TUSB_SPEED_FULL && tuh_speed_get(dev_addr) == TUSB_SPEED_LOW) ? 1 : 0; + edpt->ls_pre = (hcd_port_speed_get(rhport) == TUSB_SPEED_FULL && tuh_speed_get(dev_addr) == TUSB_SPEED_LOW) ? 1 : 0; // EP0 is bi-directional, so we need to open both OUT and IN channels if (ep_addr == 0) { @@ -574,6 +622,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b edpt->buffer = buffer; edpt->buflen = buflen; + edpt->queued_len = 0; return edpt_xfer_kickoff(ep_id); } @@ -588,8 +637,9 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { hcd_channel_t* channel = &_hcd_data.channel[i]; + uint8_t const allocated = (dir == TUSB_DIR_OUT) ? channel->out.allocated : channel->in.allocated; - if (channel->allocated[dir] == 1 && + if (allocated == 1 && channel->dev_addr == dev_addr && channel->ep_num == tu_edpt_number(ep_addr)) { channel_dealloc(channel, dir); @@ -664,11 +714,11 @@ static void edpoint_close(uint8_t ep_id) { for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { hcd_channel_t* channel = &_hcd_data.channel[i]; uint32_t ch_reg = ch_read(i) | USB_EP_CTR_TX | USB_EP_CTR_RX; - if (channel->allocated[TUSB_DIR_OUT] == 1 && channel->edpt[TUSB_DIR_OUT] == edpt) { + if (channel->out.allocated == 1 && channel->out.edpt == edpt) { channel_dealloc(channel, TUSB_DIR_OUT); channel_write_status(i, ch_reg, TUSB_DIR_OUT, EP_STAT_DISABLED, true); } - if (channel->allocated[TUSB_DIR_IN] == 1 && channel->edpt[TUSB_DIR_IN] == edpt) { + if (channel->in.allocated == 1 && channel->in.edpt == edpt) { channel_dealloc(channel, TUSB_DIR_IN); channel_write_status(i, ch_reg, TUSB_DIR_IN, EP_STAT_DISABLED, true); } @@ -697,27 +747,37 @@ static uint8_t channel_alloc(uint8_t dev_addr, uint8_t ep_addr, uint8_t ep_type) // Find channel allocate for same ep_num but other direction tusb_dir_t const other_dir = (dir == TUSB_DIR_IN) ? TUSB_DIR_OUT : TUSB_DIR_IN; for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { - if (_hcd_data.channel[i].allocated[dir] == 0 && - _hcd_data.channel[i].allocated[other_dir] == 1 && + uint8_t const allocated_dir = (dir == TUSB_DIR_OUT) ? _hcd_data.channel[i].out.allocated : _hcd_data.channel[i].in.allocated; + uint8_t const allocated_other = (other_dir == TUSB_DIR_OUT) ? _hcd_data.channel[i].out.allocated : _hcd_data.channel[i].in.allocated; + if (allocated_dir == 0 && + allocated_other == 1 && _hcd_data.channel[i].dev_addr == dev_addr && _hcd_data.channel[i].ep_num == ep_num && _hcd_data.channel[i].ep_type == ep_type) { - _hcd_data.channel[i].allocated[dir] = 1; - _hcd_data.channel[i].queued_len[dir] = 0; - _hcd_data.channel[i].retry[dir] = 0; + if (dir == TUSB_DIR_OUT) { + _hcd_data.channel[i].out.allocated = 1; + _hcd_data.channel[i].out.retry = 0; + } else { + _hcd_data.channel[i].in.allocated = 1; + _hcd_data.channel[i].in.retry = 0; + } return i; } } // Find free channel for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { - if (_hcd_data.channel[i].allocated[0] == 0 && _hcd_data.channel[i].allocated[1] == 0) { + if (_hcd_data.channel[i].out.allocated == 0 && _hcd_data.channel[i].in.allocated == 0) { _hcd_data.channel[i].dev_addr = dev_addr; _hcd_data.channel[i].ep_num = ep_num; _hcd_data.channel[i].ep_type = ep_type; - _hcd_data.channel[i].allocated[dir] = 1; - _hcd_data.channel[i].queued_len[dir] = 0; - _hcd_data.channel[i].retry[dir] = 0; + if (dir == TUSB_DIR_OUT) { + _hcd_data.channel[i].out.allocated = 1; + _hcd_data.channel[i].out.retry = 0; + } else { + _hcd_data.channel[i].in.allocated = 1; + _hcd_data.channel[i].in.retry = 0; + } return i; } } @@ -733,16 +793,19 @@ static bool edpt_xfer_kickoff(uint8_t ep_id) { TU_ASSERT(ch_id != TUSB_INDEX_INVALID_8); // all channel are in used tusb_dir_t const dir = tu_edpt_dir(edpt->ep_addr); - hcd_channel_t* channel = &_hcd_data.channel[ch_id]; - channel->edpt[dir] = edpt; + if (dir == TUSB_DIR_OUT) { + channel->out.edpt = edpt; + } else { + channel->in.edpt = edpt; + } return channel_xfer_start(ch_id, dir); } static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir) { hcd_channel_t* channel = &_hcd_data.channel[ch_id]; - hcd_endpoint_t* edpt = channel->edpt[dir]; + hcd_endpoint_t* edpt = (dir == TUSB_DIR_OUT) ? channel->out.edpt : channel->in.edpt; uint32_t ch_reg = ch_read(ch_id) & ~USB_EPREG_MASK; ch_reg |= tu_edpt_number(edpt->ep_addr) | edpt->dev_addr << USB_CHEP_DEVADDR_Pos | @@ -771,28 +834,28 @@ static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir) { btable_set_addr(ch_id, dir == TUSB_DIR_OUT ? BTABLE_BUF_TX : BTABLE_BUF_RX, pma_addr); if (dir == TUSB_DIR_OUT) { - uint16_t const len = tu_min16(edpt->buflen - channel->queued_len[TUSB_DIR_OUT], edpt->max_packet_size); + uint16_t const len = tu_min16(edpt->buflen - edpt->queued_len, edpt->max_packet_size); - fsdev_write_packet_memory(pma_addr, &(edpt->buffer[channel->queued_len[TUSB_DIR_OUT]]), len); + fsdev_write_packet_memory(pma_addr, &(edpt->buffer[edpt->queued_len]), len); btable_set_count(ch_id, BTABLE_BUF_TX, len); - channel->queued_len[TUSB_DIR_OUT] += len; + edpt->queued_len += len; } else { btable_set_rx_bufsize(ch_id, BTABLE_BUF_RX, edpt->max_packet_size); } - if (edpt->low_speed == 1) { + if (edpt->ls_pre == 1) { ch_reg |= USB_CHEP_LSEP; } else { ch_reg &= ~USB_CHEP_LSEP; } + // Setup DATA/STATUS phase start with DATA1 if (tu_edpt_number(edpt->ep_addr) == 0) { edpt->pid = 1; } if (edpt->next_setup) { - // Setup packet uses IN token edpt->next_setup = false; ch_reg |= USB_EP_SETUP; edpt->pid = 0; -- cgit v1.3.1 From 2d3aaaf6e12ba62f73ca31d5d239ac4bbc70fde4 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 27 Nov 2025 22:09:29 +0100 Subject: bsp/stm32h5: support host mode Signed-off-by: HiFiPhile --- examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/cdc_msc_hid_freertos/only.txt | 1 + examples/host/device_info/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + examples/host/midi_rx/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + hw/bsp/stm32g0/family.c | 2 +- hw/bsp/stm32g0/family.cmake | 1 + hw/bsp/stm32h5/boards/stm32h503nucleo/board.h | 49 +++++--- hw/bsp/stm32h5/boards/stm32h563nucleo/board.h | 49 +++++--- hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake | 7 ++ hw/bsp/stm32h5/boards/stm32h573i_dk/board.h | 158 +++++++++++++++++++++--- hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk | 7 ++ hw/bsp/stm32h5/family.c | 85 ++++++------- hw/bsp/stm32h5/family.cmake | 3 + hw/bsp/stm32h5/family.mk | 1 + hw/bsp/stm32h5/stm32h5xx_hal_conf.h | 2 +- hw/bsp/stm32u5/family.c | 15 ++- 19 files changed, 284 insertions(+), 102 deletions(-) diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index a7bebf1d9..4cd457879 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -16,6 +16,7 @@ mcu:MAX3421 mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index a7bebf1d9..4cd457879 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -16,6 +16,7 @@ mcu:MAX3421 mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 8da7a47d6..2322d4ecf 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -12,6 +12,7 @@ mcu:MAX3421 mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index 069f92d83..5b68f0774 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -16,6 +16,7 @@ mcu:RAXXX mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index cba58f8e8..b859b4cc0 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -15,6 +15,7 @@ mcu:RAXXX mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 +mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index 133a7c9a0..022be899d 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -18,6 +18,7 @@ mcu:RX65X mcu:RAXXX mcu:STM32F4 mcu:STM32F7 +mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index a7bebf1d9..4cd457879 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -16,6 +16,7 @@ mcu:MAX3421 mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 diff --git a/hw/bsp/stm32g0/family.c b/hw/bsp/stm32g0/family.c index 7b86aedb4..4b175b0ec 100644 --- a/hw/bsp/stm32g0/family.c +++ b/hw/bsp/stm32g0/family.c @@ -37,7 +37,7 @@ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ void USB_UCPD1_2_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 0ce85168e..4b520a0e1 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -64,6 +64,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} diff --git a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h index c8b5e31f5..b57fab10e 100644 --- a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h @@ -37,24 +37,33 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_5 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for STLink VCOM -#define UART_DEV USART3 -#define UART_CLK_EN __USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF13_USART3 - -#define UART_TX_PIN GPIO_PIN_3 -#define UART_RX_PIN GPIO_PIN_4 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_5, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF13_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF13_USART3 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -120,6 +129,10 @@ static inline void SystemClock_Config(void) { __HAL_RCC_USB_CLK_ENABLE(); } +static inline void board_init2(void) { + // Empty for this board +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h index adc3d751a..0af2f8c4f 100644 --- a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h @@ -37,24 +37,33 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOG -#define LED_PIN GPIO_PIN_4 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for STLink VCOM -#define UART_DEV USART1 -#define UART_CLK_EN __USART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART1 - -#define UART_TX_PIN GPIO_PIN_9 -#define UART_RX_PIN GPIO_PIN_10 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -128,6 +137,10 @@ static inline void SystemClock_Config(void) { } } +static inline void board_init2(void) { + // Empty for this board +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake index 92d6d98f0..76194ee91 100644 --- a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake +++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake @@ -5,4 +5,11 @@ function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32H573xx ) + target_sources(${TARGET} PUBLIC + ${ST_TCPP0203}/tcpp0203.c + ${ST_TCPP0203}/tcpp0203_reg.c + ) + target_include_directories(${TARGET} PUBLIC + ${ST_TCPP0203} + ) endfunction() diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h index d75114397..e95308b67 100644 --- a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h +++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h @@ -37,24 +37,63 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOI -#define LED_PIN GPIO_PIN_9 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -// UART Enable for STLink VCOM -#define UART_DEV USART1 -#define UART_CLK_EN __USART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART1 - -#define UART_TX_PIN GPIO_PIN_9 -#define UART_RX_PIN GPIO_PIN_10 +#include "tcpp0203.h" + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_TCPP0203_EN 4 +#define PINID_I2C_SCL 5 +#define PINID_I2C_SDA 6 +#define PINID_TCPP0203_INT 7 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOI, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, + { // TCPP0203 VCC_EN + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = 0 }, + .active_state = 1 + }, + { // I2C4 SCL + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF6_I2C4 }, + .active_state = 0 + }, + { // I2C4 SDA + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF6_I2C4 }, + .active_state = 0 + }, + { // TCPP0203 INT + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_1, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -113,6 +152,89 @@ static inline void SystemClock_Config(void) { __HAL_RCC_USB_CLK_ENABLE(); } +//--------------------------------------------------------------------+ +// USB PD +//--------------------------------------------------------------------+ +static I2C_HandleTypeDef i2c_handle = { + .Instance = I2C4, + .Init = { + .Timing = 0x20C0EDFF, // 100kHz @ 250MHz + .OwnAddress1 = 0, + .AddressingMode = I2C_ADDRESSINGMODE_7BIT, + .DualAddressMode = I2C_DUALADDRESS_DISABLE, + .OwnAddress2 = 0, + .OwnAddress2Masks = I2C_OA2_NOMASK, + .GeneralCallMode = I2C_GENERALCALL_DISABLE, + .NoStretchMode = I2C_NOSTRETCH_DISABLE, + } +}; +static TCPP0203_Object_t tcpp0203_obj = { 0 }; + +int32_t board_tcpp0203_init(void) { + // Enable TCPP0203 VCC (GPIO already configured in pindef array) + board_pindef_t* pindef = &board_pindef[PINID_TCPP0203_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, GPIO_PIN_SET); + + // Initialize I2C4 for TCPP0203 (GPIO already configured in pindef array) + __HAL_RCC_I2C4_CLK_ENABLE(); + __HAL_RCC_I2C4_FORCE_RESET(); + __HAL_RCC_I2C4_RELEASE_RESET(); + if (HAL_I2C_Init(&i2c_handle) != HAL_OK) { + return HAL_ERROR; + } + + // Enable interrupt for TCPP0203 FLGn (GPIO already configured in pindef array) + NVIC_SetPriority(EXTI1_IRQn, 12); + NVIC_EnableIRQ(EXTI1_IRQn); + + return 0; +} + +int32_t board_tcpp0203_deinit(void) { + return 0; +} + +int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT (HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +static inline void board_init2(void) { + TCPP0203_IO_t io_ctx; + + io_ctx.Address = TCPP0203_I2C_ADDRESS_X68; + io_ctx.Init = board_tcpp0203_init; + io_ctx.DeInit = board_tcpp0203_deinit; + io_ctx.ReadReg = i2c_readreg; + io_ctx.WriteReg = i2c_writereg; + + TU_ASSERT(TCPP0203_RegisterBusIO(&tcpp0203_obj, &io_ctx) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_Init(&tcpp0203_obj) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); +} + +void board_vbus_set(uint8_t rhport, bool state) { + (void) state; + if (rhport == 0) { + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + +void EXTI1_IRQHandler(void) { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_1); + if (tcpp0203_obj.IsInitialized) { + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk index b24acf89f..49743e7cd 100644 --- a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk +++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk @@ -5,3 +5,10 @@ CFLAGS += \ # For flash-jlink target JLINK_DEVICE = stm32h573ii + +SRC_C += \ + $(ST_TCPP0203)/tcpp0203.c \ + $(ST_TCPP0203)/tcpp0203_reg.c \ + +INC += \ + $(TOP)/$(ST_TCPP0203) \ diff --git a/hw/bsp/stm32h5/family.c b/hw/bsp/stm32h5/family.c index 983944b1c..fdb12e44f 100644 --- a/hw/bsp/stm32h5/family.c +++ b/hw/bsp/stm32h5/family.c @@ -46,20 +46,38 @@ TU_ATTR_UNUSED static void Error_Handler(void) { } +typedef struct { + GPIO_TypeDef* port; + GPIO_InitTypeDef pin_init; + uint8_t active_state; +} board_pindef_t; + #include "board.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ void USB_DRD_FS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ #ifdef UART_DEV -UART_HandleTypeDef UartHandle; +static UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + .AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT + } +}; #endif void board_init(void) { @@ -95,51 +113,18 @@ void board_init(void) { NVIC_SetPriority(USB_DRD_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { + HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); + } #ifdef UART_DEV UART_CLK_EN(); - - // UART - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle = (UART_HandleTypeDef) { - .Instance = UART_DEV, - .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, - .Init.WordLength = UART_WORDLENGTH_8B, - .Init.StopBits = UART_STOPBITS_1, - .Init.Parity = UART_PARITY_NONE, - .Init.HwFlowCtl = UART_HWCONTROL_NONE, - .Init.Mode = UART_MODE_TX_RX, - .Init.OverSampling = UART_OVERSAMPLING_16, - .AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT - }; HAL_UART_Init(&UartHandle); #endif // USB Pins TODO double check USB clock and pin setup // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. + GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; @@ -153,6 +138,12 @@ void board_init(void) { #if defined (PWR_USBSCR_USB33DEN) HAL_PWREx_EnableVddUSB(); #endif + + board_init2(); + +#if CFG_TUH_ENABLED + board_vbus_set(BOARD_TUH_RHPORT, 1); +#endif } //--------------------------------------------------------------------+ @@ -160,12 +151,22 @@ void board_init(void) { //--------------------------------------------------------------------+ void board_led_write(bool state) { - GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1 - LED_STATE_ON)); - HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); +#ifdef PINID_LED + board_pindef_t* pindef = &board_pindef[PINID_LED]; + GPIO_PinState pin_state = state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, pin_state); +#else + (void) state; +#endif } uint32_t board_button_read(void) { - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +#ifdef PINID_BUTTON + board_pindef_t* pindef = &board_pindef[PINID_BUTTON]; + return pindef->active_state == HAL_GPIO_ReadPin(pindef->port, pindef->pin_init.Pin); +#else + return 0; +#endif } size_t board_get_unique_id(uint8_t id[], size_t max_len) { diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index d6f356ddf..62839af43 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -5,6 +5,7 @@ set(ST_PREFIX stm32${ST_FAMILY}xx) set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(ST_TCPP0203 ${TOP}/hw/mcu/st/stm32-tcpp0203) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # include board specific @@ -44,6 +45,7 @@ function(family_add_board BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c.c ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -66,6 +68,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} diff --git a/hw/bsp/stm32h5/family.mk b/hw/bsp/stm32h5/family.mk index ec5f82d61..89a2eddd5 100644 --- a/hw/bsp/stm32h5/family.mk +++ b/hw/bsp/stm32h5/family.mk @@ -1,6 +1,7 @@ ST_FAMILY = h5 ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver +ST_TCPP0203 = hw/mcu/st/stm32-tcpp0203 include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m33 diff --git a/hw/bsp/stm32h5/stm32h5xx_hal_conf.h b/hw/bsp/stm32h5/stm32h5xx_hal_conf.h index d017bb06b..b4c64d56e 100644 --- a/hw/bsp/stm32h5/stm32h5xx_hal_conf.h +++ b/hw/bsp/stm32h5/stm32h5xx_hal_conf.h @@ -43,7 +43,6 @@ extern "C" { /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_FDCAN_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ @@ -65,6 +64,7 @@ extern "C" { #define HAL_PWR_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED #define HAL_UART_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED /* ########################## Register Callbacks selection ############################## */ /** diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index 0af497366..26d72d6a0 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -51,14 +51,21 @@ TU_ATTR_UNUSED static void Error_Handler(void) { //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ +#ifdef USB_DRD_FS +void USB_IRQHandler(void) { + tusb_int_handler(0, true); +} +#endif +#ifdef USB_OTG_FS void OTG_FS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } - +#endif +#ifdef USB_OTG_HS void OTG_HS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } - +#endif //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -- cgit v1.3.1 From 7712205ba847973afd2e7fc37ba6a069ea3c4ceb Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 27 Nov 2025 22:20:06 +0100 Subject: bsp/stm32h5: increase stack for msc_file_explorer Signed-off-by: HiFiPhile --- hw/bsp/stm32h5/family.cmake | 2 +- hw/bsp/stm32h5/linker/STM32H503xx_FLASH.ld | 2 +- hw/bsp/stm32h5/linker/STM32H523xx_FLASH.ld | 2 +- hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld | 2 +- hw/bsp/stm32h5/linker/STM32H562xx_FLASH.ld | 2 +- hw/bsp/stm32h5/linker/STM32H563xx_FLASH.ld | 2 +- hw/bsp/stm32h5/linker/STM32H573xx_FLASH.ld | 2 +- hw/bsp/stm32h5/linker/stm32h503xx_flash.icf | 32 +++++++++++++++++++++++++++++ hw/bsp/stm32h5/linker/stm32h523xx_flash.icf | 32 +++++++++++++++++++++++++++++ hw/bsp/stm32h5/linker/stm32h562xx_flash.icf | 32 +++++++++++++++++++++++++++++ hw/bsp/stm32h5/linker/stm32h563xx_flash.icf | 32 +++++++++++++++++++++++++++++ hw/bsp/stm32h5/linker/stm32h573xx_flash.icf | 32 +++++++++++++++++++++++++++++ 12 files changed, 167 insertions(+), 7 deletions(-) create mode 100644 hw/bsp/stm32h5/linker/stm32h503xx_flash.icf create mode 100644 hw/bsp/stm32h5/linker/stm32h523xx_flash.icf create mode 100644 hw/bsp/stm32h5/linker/stm32h562xx_flash.icf create mode 100644 hw/bsp/stm32h5/linker/stm32h563xx_flash.icf create mode 100644 hw/bsp/stm32h5/linker/stm32h573xx_flash.icf diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index 62839af43..a8780d165 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -27,7 +27,7 @@ set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) set(LD_FILE_Clang ${LD_FILE_GNU}) -set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT}_flash.icf) #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/stm32h5/linker/STM32H503xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H503xx_FLASH.ld index abf618233..169ac81b7 100644 --- a/hw/bsp/stm32h5/linker/STM32H503xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H503xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ diff --git a/hw/bsp/stm32h5/linker/STM32H523xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H523xx_FLASH.ld index b799892c6..633fc280e 100644 --- a/hw/bsp/stm32h5/linker/STM32H523xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H523xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld index dece7a003..4d010cf9e 100644 --- a/hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/STM32H562xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H562xx_FLASH.ld index aee2774a4..aeb799d63 100644 --- a/hw/bsp/stm32h5/linker/STM32H562xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H562xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/STM32H563xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H563xx_FLASH.ld index 129ed5170..2e8d38319 100644 --- a/hw/bsp/stm32h5/linker/STM32H563xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H563xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/STM32H573xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H573xx_FLASH.ld index eb98f3163..dd00557c0 100644 --- a/hw/bsp/stm32h5/linker/STM32H573xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H573xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/stm32h503xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h503xx_flash.icf new file mode 100644 index 000000000..c5b783b1a --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h503xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/stm32h5/linker/stm32h523xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h523xx_flash.icf new file mode 100644 index 000000000..dc97788ae --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h523xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20043FFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/stm32h5/linker/stm32h562xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h562xx_flash.icf new file mode 100644 index 000000000..b399851a3 --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h562xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x081FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2009FFFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/stm32h5/linker/stm32h563xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h563xx_flash.icf new file mode 100644 index 000000000..b399851a3 --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h563xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x081FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2009FFFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/stm32h5/linker/stm32h573xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h573xx_flash.icf new file mode 100644 index 000000000..b399851a3 --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h573xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x081FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2009FFFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; -- cgit v1.3.1 From f3ac009adbd3cb6fd7a1e993d92b533d2dfa3c18 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 27 Nov 2025 22:45:31 +0100 Subject: fix build Signed-off-by: HiFiPhile --- examples/host/midi_rx/only.txt | 1 + hw/bsp/stm32h5/boards/stm32h503nucleo/board.cmake | 3 +++ hw/bsp/stm32h5/boards/stm32h503nucleo/board.h | 5 +++++ hw/bsp/stm32h5/boards/stm32h503nucleo/board.mk | 1 + hw/bsp/stm32h5/boards/stm32h563nucleo/board.h | 5 +++++ tools/get_deps.py | 2 +- 6 files changed, 16 insertions(+), 1 deletion(-) diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index 022be899d..09d725860 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -16,6 +16,7 @@ mcu:MSP432E4 mcu:RP2040 mcu:RX65X mcu:RAXXX +mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 mcu:STM32H5 diff --git a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.cmake b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.cmake index 1a44c3f1d..5978758fc 100644 --- a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.cmake +++ b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.cmake @@ -6,4 +6,7 @@ function(update_board TARGET) STM32H503xx HSE_VALUE=24000000 ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_EXAMPLE_VIDEO_READONLY + ) endfunction() diff --git a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h index b57fab10e..9dd2b0466 100644 --- a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h @@ -133,6 +133,11 @@ static inline void board_init2(void) { // Empty for this board } +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; + (void) state; +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.mk b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.mk index 0292353ae..497dd894e 100644 --- a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.mk +++ b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.mk @@ -3,6 +3,7 @@ MCU_VARIANT = stm32h503xx CFLAGS += \ -DSTM32H503xx \ -DHSE_VALUE=24000000 \ + -DCFG_EXAMPLE_VIDEO_READONLY \ # For flash-jlink target JLINK_DEVICE = stm32h503rb diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h index 0af2f8c4f..20c91f606 100644 --- a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h @@ -141,6 +141,11 @@ static inline void board_init2(void) { // Empty for this board } +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; + (void) state; +} + #ifdef __cplusplus } #endif diff --git a/tools/get_deps.py b/tools/get_deps.py index 35f3b3e92..e915bf108 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -141,7 +141,7 @@ deps_optional = { 'stm32h7'], 'hw/mcu/st/stm32-tcpp0203': ['https://github.com/STMicroelectronics/stm32-tcpp0203.git', '9918655bff176ac3046ccf378b5c7bbbc6a38d15', - 'stm32h7rs stm32n6'], + 'stm32h5 stm32h7rs stm32n6'], 'hw/mcu/st/stm32c0xx_hal_driver': ['https://github.com/STMicroelectronics/stm32c0xx_hal_driver.git', 'c283b143bef6bdaacf64240ee6f15eb61dad6125', 'stm32c0'], -- cgit v1.3.1 From c6b94db2990bf9975650c2879f4aabdade6f90d0 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 28 Nov 2025 00:11:08 +0100 Subject: Use one endpoint for EP0 Signed-off-by: HiFiPhile --- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 35 +++++++++++---------------- 1 file changed, 14 insertions(+), 21 deletions(-) diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index ff2f2946e..22a74efbe 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -575,19 +575,6 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const edpt->pid = 0; edpt->ls_pre = (hcd_port_speed_get(rhport) == TUSB_SPEED_FULL && tuh_speed_get(dev_addr) == TUSB_SPEED_LOW) ? 1 : 0; - // EP0 is bi-directional, so we need to open both OUT and IN channels - if (ep_addr == 0) { - uint8_t const ep_id_in = endpoint_alloc(); - if (ep_id_in == TUSB_INDEX_INVALID_8) { - // free previously allocated OUT endpoint - endpoint_dealloc(edpt); - TU_ASSERT(false); - } - - _hcd_data.edpt[ep_id_in] = *edpt; // copy from OUT endpoint - _hcd_data.edpt[ep_id_in].ep_addr = 0 | TUSB_DIR_IN_MASK; - } - return true; } @@ -599,13 +586,6 @@ bool hcd_edpt_close(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { edpoint_close(ep_id); - if (ep_addr == 0) { - uint8_t const ep_id_in = endpoint_find(dev_addr, 0 | TUSB_DIR_IN_MASK); - TU_ASSERT(ep_id_in != TUSB_INDEX_INVALID_8); - - edpoint_close(ep_id_in); - } - return true; } @@ -624,6 +604,12 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b edpt->buflen = buflen; edpt->queued_len = 0; + uint8_t const ep_num = tu_edpt_number(ep_addr); + if (ep_num == 0) { + // update ep_dir since control endpoint can switch direction + edpt->ep_addr = ep_addr; + } + return edpt_xfer_kickoff(ep_id); } @@ -696,9 +682,16 @@ static uint8_t endpoint_alloc(void) { } static uint8_t endpoint_find(uint8_t dev_addr, uint8_t ep_addr) { + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const ep_dir = tu_edpt_dir(ep_addr); + for (uint32_t i = 0; i < (uint32_t)CFG_TUH_FSDEV_ENDPOINT_MAX; i++) { hcd_endpoint_t* edpt = &_hcd_data.edpt[i]; - if (edpt->allocated == 1 && edpt->dev_addr == dev_addr && edpt->ep_addr == ep_addr) { + tusb_dir_t const dir = tu_edpt_dir(edpt->ep_addr); + uint8_t const num = tu_edpt_number(edpt->ep_addr); + // Match both ep_num and ep_dir, or match ep_num 0 (control endpoint) + if (edpt->allocated == 1 && edpt->dev_addr == dev_addr && num == ep_num && + (dir == ep_dir || ep_num == 0)) { return i; } } -- cgit v1.3.1 From 1ffe00b4363fc2d76751270118091fc3a3a1b92b Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 28 Nov 2025 13:18:10 +0100 Subject: Fix deinit glitch Signed-off-by: HiFiPhile --- src/portable/st/stm32_fsdev/fsdev_common.c | 5 --- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 47 +++++++++++++++++---------- 2 files changed, 30 insertions(+), 22 deletions(-) diff --git a/src/portable/st/stm32_fsdev/fsdev_common.c b/src/portable/st/stm32_fsdev/fsdev_common.c index 4f95d9d7f..60ef339a6 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.c +++ b/src/portable/st/stm32_fsdev/fsdev_common.c @@ -37,11 +37,6 @@ // Reset the USB Core void fsdev_core_reset(void) { - // Follow the RM mentions to use a special ordering of PDWN and FRES - for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us - asm("NOP"); - } - // Perform USB peripheral reset FSDEV_REG->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 22a74efbe..212f620ac 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -59,6 +59,20 @@ TU_VERIFY_STATIC(CFG_TUH_FSDEV_ENDPOINT_MAX <= 255, "currently only use 8-bit for index"); +#if CFG_TUSB_MCU == OPT_MCU_STM32H5 + #define CPU_FREQUENCY_MHZ 250U +#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + #define CPU_FREQUENCY_MHZ 160U +#elif CFG_TUSB_MCU == OPT_MCU_STM32U3 + #define CPU_FREQUENCY_MHZ 96U +#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 + #define CPU_FREQUENCY_MHZ 64U +#elif CFG_TUSB_MCU == OPT_MCU_STM32C0 + #define CPU_FREQUENCY_MHZ 48U +#else + #error "CPU_FREQUENCY_MHZ not defined for this STM32 MCU" +#endif + enum { HCD_XFER_ERROR_MAX = 3, HCD_XFER_NAK_MAX = 15, @@ -122,6 +136,7 @@ static uint8_t channel_alloc(uint8_t dev_addr, uint8_t ep_addr, uint8_t ep_type) static bool edpt_xfer_kickoff(uint8_t ep_id); static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir); static void edpoint_close(uint8_t ep_id); +static void port_status_handler(uint8_t rhport, bool in_isr); static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); static void ch_handle_nak(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); static void ch_handle_stall(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir); @@ -166,30 +181,16 @@ static inline uint16_t channel_get_rx_count(uint8_t ch_id) { * We choose the delay count based on max CPU frequency (in MHz) to ensure the delay is at least the required time. */ -#if CFG_TUSB_MCU == OPT_MCU_STM32H5 - #define FREQUENCY_MHZ 250U -#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 - #define FREQUENCY_MHZ 160U -#elif CFG_TUSB_MCU == OPT_MCU_STM32U3 - #define FREQUENCY_MHZ 96U -#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 - #define FREQUENCY_MHZ 64U -#elif CFG_TUSB_MCU == OPT_MCU_STM32C0 - #define FREQUENCY_MHZ 48U -#else - #error "FREQUENCY_MHZ not defined for this STM32 MCU" -#endif - uint32_t ch_reg = ch_read(ch_id); if (FSDEV_REG->ISTR & USB_ISTR_LS_DCONN || ch_reg & USB_CHEP_LSEP) { // Low speed mode: 6.4 us delay -> about 2 cycles per MHz - volatile uint32_t cycle_count = FREQUENCY_MHZ * 2U; + volatile uint32_t cycle_count = CPU_FREQUENCY_MHZ * 2U; while (cycle_count > 0U) { cycle_count--; // each count take 3 cycles (1 for sub, jump, and compare) } } else { // Full speed mode: 800 ns delay -> about 0.25 cycles per MHz - volatile uint32_t cycle_count = FREQUENCY_MHZ / 4U; + volatile uint32_t cycle_count = CPU_FREQUENCY_MHZ / 4U; while (cycle_count > 0U) { cycle_count--; // each count take 3 cycles (1 for sub, jump, and compare) } @@ -231,12 +232,24 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { fsdev_connect(rhport); + // If DCON_STAT is already set, the controller sometimes misses the initial connection interrupt + if (FSDEV_REG->ISTR & USB_ISTR_DCON_STAT) { + // Wait DP/DM stabilize time + volatile uint32_t cycle_count = CPU_FREQUENCY_MHZ / 4U; + while (cycle_count > 0U) { + cycle_count--; + } + port_status_handler(rhport, false); + } + return true; } bool hcd_deinit(uint8_t rhport) { (void)rhport; + fsdev_disconnect(rhport); + fsdev_deinit(); return true; @@ -259,7 +272,7 @@ static inline void sof_handler(void) { } } -static inline void port_status_handler(uint8_t rhport, bool in_isr) { +static void port_status_handler(uint8_t rhport, bool in_isr) { uint32_t const fnr_reg = FSDEV_REG->FNR; uint32_t const istr_reg = FSDEV_REG->ISTR; // SE0 detected USB Disconnected state -- cgit v1.3.1 From ae4e3c032826b4890dde14f01e7f568ae02322f0 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 28 Nov 2025 13:18:38 +0100 Subject: Fix button Signed-off-by: HiFiPhile --- hw/bsp/stm32h5/boards/stm32h573i_dk/board.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h index e95308b67..5788837ab 100644 --- a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h +++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h @@ -60,7 +60,7 @@ static board_pindef_t board_pindef[] = { }, { // Button .port = GPIOC, - .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, .active_state = 1 }, { // UART TX -- cgit v1.3.1 From 97c5151b34158f08fbfb51684cbfbc807abd77e5 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 28 Nov 2025 13:27:09 +0100 Subject: Update note Signed-off-by: HiFiPhile --- README.rst | 264 +++++++++++++++++++++++++++--------------------------- src/device/usbd.h | 2 + src/host/usbh.h | 2 + 3 files changed, 136 insertions(+), 132 deletions(-) diff --git a/README.rst b/README.rst index ef19b0ccd..75f93f656 100644 --- a/README.rst +++ b/README.rst @@ -129,138 +129,138 @@ TinyUSB is completely thread-safe by pushing all Interrupt Service Request (ISR) Supported CPUs -------------- -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | -+==============+=============================+========+======+===========+========================+===================+ -| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | MAX32 650, 666, 690, | ✔ | | ✔ | musb | 1-dir ep | -| | MAX78002 | | | | | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Artery AT32 | F403a_407, F413 | ✔ | | | fsdev | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | F415, F435_437, F423, F425 | ✔ | ✔ | | dwc2 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | F402_F405 | ✔ | ✔ | ✔ | dwc2 | F405 is HS | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Bridgetek | FT90x | ✔ | | ✔ | ft9xx | 1-dir ep | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Espressif | S2, S3 | ✔ | ✔ | ✖ | dwc2 | | -| ESP32 +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | P4 | ✔ | ✔ | ✔ | dwc2 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | H4 | ✔ | ✔ | ✖ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Infineon | XMC4500 | ✔ | ✔ | ✖ | dwc2 | | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | D51, E5x | ✔ | | ✖ | samd | | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | G55 | ✔ | | ✖ | samg | 1-dir ep | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | 1-dir ep | -| +-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| | PIC | 24 | ✔ | | | pic | ci_fs variant | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | dsPIC33 | ✔ | | | pic | ci_fs variant | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | 32mz | ✔ | | | pic32mz | musb variant | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| MindMotion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| NordicSemi | nRF 52833, 52840, 5340 | ✔ | ✖ | ✖ | nrf5x | only ep8 is ISO | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | NUC121/NUC125 | ✔ | ✖ | ✖ | nuc121 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | NUC126 | ✔ | ✖ | ✖ | nuc121 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | NUC505 | ✔ | | ✔ | nuc505 | | -+--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs, ehci | | -| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant | -| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40, ohci | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs, ehci | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | -| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs, ehci | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | A15 | ✔ | | | ci_fs | | -+--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | -| +-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| ST STM32 | F0, F3, L0, L1, L5, WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | | -| | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 105, 107 | ✔ | ✔ | ✖ | dwc2 | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | F2, F4, F7, H7, H7RS | ✔ | ✔ | ✔ | dwc2 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | C0, G0, H5 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0 | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | -| | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 4x5, 4x6, 4+ | ✔ | ✔ | ✖ | dwc2 | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | N6 | ✔ | ✔ | ✔ | dwc2 | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | U0 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | U3 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0 | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | U5 | 535, 545 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0 | -| | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | -| | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 59x,5Ax,5Fx,5Gx | ✔ | ✔ | ✔ | dwc2 | | -+--------------+----+------------------------+--------+------+-----------+------------------------+-------------------+ -| TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | MSP432E4, TM4C123 | ✔ | | ✖ | musb | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| WCH | CH32F20x | ✔ | | ✔ | ch32_usbhs | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | CH32V20x | ✔ | | ✖ | stm32_fsdev/ch32_usbfs | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | CH32V305, CH32V307 | ✔ | | ✔ | ch32_usbfs/hs | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | ++==============+=============================+========+======+===========+========================+========================+ +| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | MAX32 650, 666, 690, | ✔ | | ✔ | musb | 1-dir ep | +| | MAX78002 | | | | | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Artery AT32 | F403a_407, F413 | ✔ | | | fsdev | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | F415, F435_437, F423, F425 | ✔ | ✔ | | dwc2 | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | F402_F405 | ✔ | ✔ | ✔ | dwc2 | F405 is HS | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Bridgetek | FT90x | ✔ | | ✔ | ft9xx | 1-dir ep | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Espressif | S2, S3 | ✔ | ✔ | ✖ | dwc2 | | +| ESP32 +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | P4 | ✔ | ✔ | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | H4 | ✔ | ✔ | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Infineon | XMC4500 | ✔ | ✔ | ✖ | dwc2 | | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ +| MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | +| | +-----------------------+--------+------+-----------+------------------------+------------------------+ +| | | D51, E5x | ✔ | | ✖ | samd | | +| | +-----------------------+--------+------+-----------+------------------------+------------------------+ +| | | G55 | ✔ | | ✖ | samg | 1-dir ep | +| | +-----------------------+--------+------+-----------+------------------------+------------------------+ +| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | 1-dir ep | +| +-----+-----------------------+--------+------+-----------+------------------------+------------------------+ +| | PIC | 24 | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+------------------------+------------------------+ +| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+------------------------+------------------------+ +| | | dsPIC33 | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+------------------------+------------------------+ +| | | 32mz | ✔ | | | pic32mz | musb variant | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ +| MindMotion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ +| NordicSemi | nRF 52833, 52840, 5340 | ✔ | ✖ | ✖ | nrf5x | only ep8 is IO | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | NUC121/NUC125 | ✔ | ✖ | ✖ | nuc121 | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | NUC126 | ✔ | ✖ | ✖ | nuc121 | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | NUC505 | ✔ | | ✔ | nuc505 | | ++--------------+---------+-------------------+--------+------+-----------+------------------------+------------------------+ +| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs, ehci | | +| +---------+-------------------+--------+------+-----------+------------------------+------------------------+ +| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | +| | +-------------------+--------+------+-----------+------------------------+------------------------+ +| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant | +| +---------+-------------------+--------+------+-----------+------------------------+------------------------+ +| | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------------+--------+------+-----------+------------------------+------------------------+ +| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40, ohci | | +| | +-------------------+--------+------+-----------+------------------------+------------------------+ +| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs, ehci | | +| | +-------------------+--------+------+-----------+------------------------+------------------------+ +| | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------------+--------+------+-----------+------------------------+------------------------+ +| | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | +| +---------+-------------------+--------+------+-----------+------------------------+------------------------+ +| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs, ehci | | +| | +-------------------+--------+------+-----------+------------------------+------------------------+ +| | | A15 | ✔ | | | ci_fs | | ++--------------+---------+-------------------+--------+------+-----------+------------------------+------------------------+ +| Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ +| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | +| +-----+-----------------------+--------+------+-----------+------------------------+------------------------+ +| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | +| | +-----------------------+--------+------+-----------+------------------------+------------------------+ +| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ +| Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| ST STM32 | F0, F3, L0, L1, L5, WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+------------------------+------------------------+ +| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | +------------------------+--------+------+-----------+------------------------+------------------------+ +| | | 105, 107 | ✔ | ✔ | ✖ | dwc2 | | +| +----+------------------------+--------+------+-----------+------------------------+------------------------+ +| | F2, F4, F7, H7, H7RS | ✔ | ✔ | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | C0, G0, H5 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0, H5 | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+------------------------+------------------------+ +| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | +------------------------+--------+------+-----------+------------------------+------------------------+ +| | | 4x5, 4x6, 4+ | ✔ | ✔ | ✖ | dwc2 | | +| +----+------------------------+--------+------+-----------+------------------------+------------------------+ +| | N6 | ✔ | ✔ | ✔ | dwc2 | | +| +----+------------------------+--------+------+-----------+------------------------+------------------------+ +| | U0 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+------------------------+------------------------+ +| | U3 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0, H5 | +| +----+------------------------+--------+------+-----------+------------------------+------------------------+ +| | U5 | 535, 545 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0, H5 | +| | +------------------------+--------+------+-----------+------------------------+------------------------+ +| | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | +| | +------------------------+--------+------+-----------+------------------------+------------------------+ +| | | 59x,5Ax,5Fx,5Gx | ✔ | ✔ | ✔ | dwc2 | | ++--------------+----+------------------------+--------+------+-----------+------------------------+------------------------+ +| TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | MSP432E4, TM4C123 | ✔ | | ✖ | musb | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ +| WCH | CH32F20x | ✔ | | ✔ | ch32_usbhs | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | CH32V20x | ✔ | | ✖ | stm32_fsdev/ch32_usbfs | | +| +-----------------------------+--------+------+-----------+------------------------+------------------------+ +| | CH32V305, CH32V307 | ✔ | | ✔ | ch32_usbfs/hs | | ++--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ Table Legend ^^^^^^^^^^^^ diff --git a/src/device/usbd.h b/src/device/usbd.h index c446638c3..3cf195452 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -38,6 +38,7 @@ extern "C" { //--------------------------------------------------------------------+ // New API to replace tud_init() to init device stack on specific roothub port +// Must be called in the same task/context as tud_task() if RTOS is used bool tud_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Init device stack on roothub port @@ -53,6 +54,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool tud_init (uint8_t rhport) { } // Deinit device stack on roothub port +// Must be called in the same task/context as tud_task() if RTOS is used bool tud_deinit(uint8_t rhport); // Check if device stack is already initialized diff --git a/src/host/usbh.h b/src/host/usbh.h index 697c911ff..d86efbcb2 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -150,6 +150,7 @@ void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr); bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // New API to replace tuh_init() to init host stack on specific roothub port +// Must be called in the same task/context as tuh_task() if RTOS is used bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Init host stack @@ -165,6 +166,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool tuh_init(uint8_t rhport) { } // Deinit host stack on rhport +// Must be called in the same task/context as tuh_task() if RTOS is used bool tuh_deinit(uint8_t rhport); // Check if host stack is already initialized with any roothub ports -- cgit v1.3.1 From a412a8e50d07fc789ea598f101a94570b1f33fc4 Mon Sep 17 00:00:00 2001 From: gab-k Date: Wed, 10 Dec 2025 23:04:39 +0100 Subject: hw/mcu: add support for NXP RW612 --- README.rst | 4 ++- src/common/tusb_mcu.h | 8 ++++++ src/portable/chipidea/ci_hs/ci_hs_rw61x.h | 48 +++++++++++++++++++++++++++++++ src/portable/chipidea/ci_hs/dcd_ci_hs.c | 3 ++ src/portable/ehci/ehci.c | 2 +- src/tusb_option.h | 1 + 6 files changed, 64 insertions(+), 2 deletions(-) create mode 100644 src/portable/chipidea/ci_hs/ci_hs_rw61x.h diff --git a/README.rst b/README.rst index 6a6f07825..463cc8b42 100644 --- a/README.rst +++ b/README.rst @@ -208,7 +208,9 @@ Supported CPUs | | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs, ehci | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ | | | A15 | ✔ | | | ci_fs | | -+--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ +| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ +| | RW61x | ✔ | | ✔ | ci_hs, ehci | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ | Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | +--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ | Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 1e773bf96..89316ee77 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -111,6 +111,14 @@ #define TUP_DCD_ENDPOINT_MAX 16 +#elif TU_CHECK_MCU(OPT_MCU_RW61X) + // USB0 is chipidea HS + #define TUP_USBIP_CHIPIDEA_HS + #define TUP_USBIP_EHCI + + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 + #elif TU_CHECK_MCU(OPT_MCU_MIMXRT1XXX) #include "fsl_device_registers.h" diff --git a/src/portable/chipidea/ci_hs/ci_hs_rw61x.h b/src/portable/chipidea/ci_hs/ci_hs_rw61x.h new file mode 100644 index 000000000..114fe26c3 --- /dev/null +++ b/src/portable/chipidea/ci_hs/ci_hs_rw61x.h @@ -0,0 +1,48 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _CI_HS_RW61X_H_ +#define _CI_HS_RW61X_H_ + +#include "fsl_device_registers.h" + +static const ci_hs_controller_t _ci_controller[] = { + {.reg_base = USBOTG_BASE, .irqnum = USB_IRQn} +}; + +TU_ATTR_ALWAYS_INLINE static inline ci_hs_regs_t* CI_HS_REG(uint8_t port) { + (void) port; + return ((ci_hs_regs_t*) _ci_controller[0].reg_base); +} + +#define CI_DCD_INT_ENABLE(_p) do { (void) _p; NVIC_EnableIRQ (_ci_controller[0].irqnum); } while (0) +#define CI_DCD_INT_DISABLE(_p) do { (void) _p; NVIC_DisableIRQ(_ci_controller[0].irqnum); } while (0) + +#define CI_HCD_INT_ENABLE(_p) NVIC_EnableIRQ (_ci_controller[_p].irqnum) +#define CI_HCD_INT_DISABLE(_p) NVIC_DisableIRQ(_ci_controller[_p].irqnum) + + +#endif diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 4a5e5c91f..27298989c 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -55,6 +55,9 @@ bool dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { // MCX N9 only port 1 use this controller #include "ci_hs_mcx.h" +#elif TU_CHECK_MCU(OPT_MCU_RW61X) + #include "ci_hs_rw61x.h" + #else #error "Unsupported MCUs" #endif diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index c33c970e4..e604a0360 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -40,7 +40,7 @@ #include "ehci.h" // NXP specific fixes -#if TU_CHECK_MCU(OPT_MCU_MIMXRT1XXX, OPT_MCU_LPC55, OPT_MCU_MCXN9) +#if TU_CHECK_MCU(OPT_MCU_MIMXRT1XXX, OPT_MCU_LPC55, OPT_MCU_MCXN9, OPT_MCU_RW61X) #include "fsl_device_registers.h" #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index be954e01a..68f2d3598 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -199,6 +199,7 @@ // NXP LPC MCX #define OPT_MCU_MCXN9 2300 ///< NXP MCX N9 Series #define OPT_MCU_MCXA15 2301 ///< NXP MCX A15 Series +#define OPT_MCU_RW61X 2302 ///< NXP RW61x Series // Analog Devices #define OPT_MCU_MAX32690 2400 ///< ADI MAX32690 -- cgit v1.3.1 From 8c5adcefbf64be17daa048414ba21552eab9c3a8 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 13 Dec 2025 13:54:53 +0100 Subject: tusb: fix stream write logic without fifo Signed-off-by: HiFiPhile --- src/tusb.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/src/tusb.c b/src/tusb.c index 8ba9f0fff..8117c3e3e 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -411,27 +411,19 @@ uint32_t tu_edpt_stream_write_xfer(tu_edpt_stream_t *s) { } uint32_t tu_edpt_stream_write(tu_edpt_stream_t *s, const void *buffer, uint32_t bufsize) { - TU_VERIFY(bufsize > 0); - #if CFG_TUSB_EDPT_STREAM_NO_FIFO_ENABLED if (0 == tu_fifo_depth(&s->ff)) { - // non-fifo mode + // non-fifo mode: TX need ep buffer + TU_VERIFY(s->ep_buf != NULL, 0); TU_VERIFY(stream_claim(s), 0); - uint32_t xact_len; - if (s->ep_buf != NULL) { - // using ep buf - xact_len = tu_min32(bufsize, s->ep_bufsize); - memcpy(s->ep_buf, buffer, xact_len); - } else { - // using hwfifo - xact_len = bufsize; - } - TU_ASSERT(stream_xfer(s, (uint16_t)xact_len), 0); - + uint32_t xact_len = tu_min32(bufsize, s->ep_bufsize); + memcpy(s->ep_buf, buffer, xact_len); + TU_ASSERT(stream_xfer(s, (uint16_t) xact_len), 0); return xact_len; } else #endif { + TU_VERIFY(bufsize > 0); const uint16_t ret = tu_fifo_write_n(&s->ff, buffer, (uint16_t) bufsize); // flush if fifo has more than packet size or -- cgit v1.3.1 From b43b99a571e81fb99f6603d9534f7d4bb55e8d02 Mon Sep 17 00:00:00 2001 From: gab-k Date: Sun, 14 Dec 2025 01:30:12 +0100 Subject: bsp: nxp: add support for RW612 (FRDM-RW612) - Added `rw61x` family support. - Added `frdm_rw612` board support. - Update `get_deps.py` to include mcux-sdk for RW61x. - Add ci_hs_rw61x include to ChipIdea HS driver and enable host examples. --- examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/cdc_msc_hid_freertos/only.txt | 1 + examples/host/device_info/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + examples/host/midi_rx/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + hw/bsp/rw61x/FreeRTOSConfig/FreeRTOSConfig.h | 150 +++++++++++++++++ hw/bsp/rw61x/boards/frdm_rw612/board.cmake | 30 ++++ hw/bsp/rw61x/boards/frdm_rw612/board.h | 76 +++++++++ hw/bsp/rw61x/boards/frdm_rw612/board.mk | 20 +++ hw/bsp/rw61x/boards/frdm_rw612/clock_config.c | 170 ++++++++++++++++++++ hw/bsp/rw61x/boards/frdm_rw612/clock_config.h | 116 ++++++++++++++ hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c | 223 ++++++++++++++++++++++++++ hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h | 146 +++++++++++++++++ hw/bsp/rw61x/family.c | 135 ++++++++++++++++ hw/bsp/rw61x/family.cmake | 102 ++++++++++++ hw/bsp/rw61x/family.mk | 52 ++++++ src/portable/chipidea/ci_hs/hcd_ci_hs.c | 3 + tools/get_deps.py | 4 +- 20 files changed, 1232 insertions(+), 2 deletions(-) create mode 100644 hw/bsp/rw61x/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/rw61x/boards/frdm_rw612/board.cmake create mode 100644 hw/bsp/rw61x/boards/frdm_rw612/board.h create mode 100644 hw/bsp/rw61x/boards/frdm_rw612/board.mk create mode 100644 hw/bsp/rw61x/boards/frdm_rw612/clock_config.c create mode 100644 hw/bsp/rw61x/boards/frdm_rw612/clock_config.h create mode 100644 hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c create mode 100644 hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h create mode 100644 hw/bsp/rw61x/family.c create mode 100644 hw/bsp/rw61x/family.cmake create mode 100644 hw/bsp/rw61x/family.mk diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index cba58f8e8..1c9ae72eb 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -8,6 +8,7 @@ mcu:LPC43XX mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:RW61X mcu:RP2040 mcu:MSP432E4 mcu:RX65X diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index cba58f8e8..1c9ae72eb 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -8,6 +8,7 @@ mcu:LPC43XX mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:RW61X mcu:RP2040 mcu:MSP432E4 mcu:RX65X diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index ef0a1ac96..5c5b7c56d 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -6,6 +6,7 @@ mcu:LPC43XX mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:RW61X mcu:MSP432E4 mcu:RX65X mcu:MAX3421 diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index 61a08f68d..892cbf4b8 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -9,6 +9,7 @@ mcu:MAX3421 mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:RW61X mcu:MSP432E4 mcu:RP2040 mcu:RX65X diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index cba58f8e8..1c9ae72eb 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -8,6 +8,7 @@ mcu:LPC43XX mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:RW61X mcu:RP2040 mcu:MSP432E4 mcu:RX65X diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index 133a7c9a0..ff9c0bcb8 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -12,6 +12,7 @@ mcu:MAX3421 mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:RW61X mcu:MSP432E4 mcu:RP2040 mcu:RX65X diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index cba58f8e8..1c9ae72eb 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -8,6 +8,7 @@ mcu:LPC43XX mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:RW61X mcu:RP2040 mcu:MSP432E4 mcu:RX65X diff --git a/hw/bsp/rw61x/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/rw61x/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..281b4d40c --- /dev/null +++ b/hw/bsp/rw61x/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,150 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "fsl_device_registers.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 0 // RW61x has FPU but is disabled due to using cortex-m33-nodsp-nofp.mk +#define configENABLE_TRUSTZONE 0 +#define configRUN_FREERTOS_SECURE_ONLY 1 // Cortex-M33 runs in secure mode after reset by default! +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<CAU_SLP_CTRL & PMU_CAU_SLP_CTRL_SOC_SLP_RDY_MASK) == 0U) + { + /* Enable the CAU sleep clock. */ + CLOCK_EnableClock(kCLOCK_RefClkCauSlp); + } + if ((SYSCTL2->SOURCE_CLK_GATE & SYSCTL2_SOURCE_CLK_GATE_REFCLK_SYS_CG_MASK) != 0U) + { + /* Enable the REFCLK_SYS clock. */ + CLOCK_EnableClock(kCLOCK_RefClkSys); + } + /* Initialize T3 PLL and enable outputs that are not clock gated. */ + CLOCK_InitT3RefClk(kCLOCK_T3MciIrc48m); + /* Enable FFRO - T3 PLL 48/60 MHz IRC clock output */ + CLOCK_EnableClock(kCLOCK_T3PllMciIrcClk); + /* Enable T3 PLL 256 MHz clock output */ + CLOCK_EnableClock(kCLOCK_T3PllMci256mClk); + /* Set core clock to safe system oscillator clock for initialization of other sources. */ + CLOCK_AttachClk(kSYSOSC_to_MAIN_CLK); + CLOCK_SetClkDiv(kCLOCK_DivSysCpuAhbClk, 1); + /* Enable TCPU PLL MCI clock output */ + CLOCK_EnableClock(kCLOCK_TcpuMciClk); + /* Initialize TDDR PLL and enable outputs that are not clock gated. */ + CLOCK_InitTddrRefClk(kCLOCK_TddrFlexspiDiv10); + /* Enable TDDR PLL FlexSPI clock output */ + CLOCK_EnableClock(kCLOCK_TddrMciFlexspiClk); + /* Initialize AVPLL and enable both channels. */ + CLOCK_InitAvPll(&avpllConfig_BOARD_BootClockRUN); + /* Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kRC32K_to_CLK32K); /* Switch CLK32K to RC32K */ + /*!< Please note SYSTICK_CLK source is used only if the SysTick SYST_CSR register CLKSOURCE bit is set to 0. */ + CLOCK_AttachClk(kSYSTICK_DIV_to_SYSTICK_CLK); /* Switch SYSTICK_CLK to SYSTICK_DIV */ + /* Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAudioPllClk, 1U); /* Set .AUDIOPLLCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivPllFrgClk, 13U); /* Set .FRGPLLCLKDIV divider to value 13 */ + CLOCK_SetClkDiv(kCLOCK_DivMainPllClk, 1U); /* Set .MAINPLLCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivAux0PllClk, 1U); /* Set .AUX0PLLCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 1U); /* Set .SYSTICKFCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivPmuFclk, 5U); /* Set .PMUFCLKDIV divider to value 5 */ + /* Select the main clock source for the main system clock (MAINCLKSELA and MAINCLKSELB). */ + CLOCK_AttachClk(kMAIN_PLL_to_MAIN_CLK); + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_HCLK; +} + diff --git a/hw/bsp/rw61x/boards/frdm_rw612/clock_config.h b/hw/bsp/rw61x/boards/frdm_rw612/clock_config.h new file mode 100644 index 000000000..3b467d869 --- /dev/null +++ b/hw/bsp/rw61x/boards/frdm_rw612/clock_config.h @@ -0,0 +1,116 @@ +/* + * Copyright 2024 NXP + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_AUDIO_PLL_CLK 12287999UL /* Clock consumers of audio_pll_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_AUX0_PLL_CLK 260000000UL /* Clock consumers of aux0_pll_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_AUX1_PLL_CLK 0UL /* Clock consumers of aux1_pll_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_AVPLL_CH1_CLKOUT 12287999UL /* Clock consumers of avpll_ch1_clkout output : N/A */ +#define BOARD_BOOTCLOCKRUN_AVPLL_CH2_CLKOUT 63999997UL /* Clock consumers of avpll_ch2_clkout output : N/A */ +#define BOARD_BOOTCLOCKRUN_CAU_SLP_CLK 4000000UL /* Clock consumers of cau_slp_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_CLK_32K 32000UL /* Clock consumers of clk_32k output : RTC */ +#define BOARD_BOOTCLOCKRUN_CLK_OUT 0UL /* Clock consumers of clk_out output : N/A */ +#define BOARD_BOOTCLOCKRUN_CLK_PMU_SYS 52000000UL /* Clock consumers of clk_pmu_sys output : PMU */ +#define BOARD_BOOTCLOCKRUN_CTIMER0_FCLK 0UL /* Clock consumers of ctimer0_fclk output : CTIMER0 */ +#define BOARD_BOOTCLOCKRUN_CTIMER1_FCLK 0UL /* Clock consumers of ctimer1_fclk output : CTIMER1 */ +#define BOARD_BOOTCLOCKRUN_CTIMER2_FCLK 0UL /* Clock consumers of ctimer2_fclk output : CTIMER2 */ +#define BOARD_BOOTCLOCKRUN_CTIMER3_FCLK 0UL /* Clock consumers of ctimer3_fclk output : CTIMER3 */ +#define BOARD_BOOTCLOCKRUN_DMIC_FCLK 0UL /* Clock consumers of dmic_fclk output : DMIC0 */ +#define BOARD_BOOTCLOCKRUN_ELS_128M_CLK 128000000UL /* Clock consumers of els_128m_clk output : ELS */ +#define BOARD_BOOTCLOCKRUN_ELS_256M_CLK 256000000UL /* Clock consumers of els_256m_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_ELS_64M_CLK 64000000UL /* Clock consumers of els_64m_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_ELS_FCLK 0UL /* Clock consumers of els_fclk output : ELS */ +#define BOARD_BOOTCLOCKRUN_FFRO_CLK_DIV4 12075471UL /* Clock consumers of ffro_clk_div4 output : N/A */ +#define BOARD_BOOTCLOCKRUN_FLEXCOMM0_FCLK 0UL /* Clock consumers of flexcomm0_fclk output : FLEXCOMM0 */ +#define BOARD_BOOTCLOCKRUN_FLEXCOMM14_FCLK 0UL /* Clock consumers of flexcomm14_fclk output : FLEXCOMM14 */ +#define BOARD_BOOTCLOCKRUN_FLEXCOMM1_FCLK 0UL /* Clock consumers of flexcomm1_fclk output : FLEXCOMM1 */ +#define BOARD_BOOTCLOCKRUN_FLEXCOMM2_FCLK 0UL /* Clock consumers of flexcomm2_fclk output : FLEXCOMM2 */ +#define BOARD_BOOTCLOCKRUN_FLEXCOMM3_FCLK 0UL /* Clock consumers of flexcomm3_fclk output : FLEXCOMM3 */ +#define BOARD_BOOTCLOCKRUN_FLEXSPI_FCLK 0UL /* Clock consumers of flexspi_fclk output : FLEXSPI */ +#define BOARD_BOOTCLOCKRUN_GAU_FCLK 0UL /* Clock consumers of gau_fclk output : GAU_ACOMP, GAU_BG, GAU_DAC0, GAU_GPADC0, GAU_GPADC1 */ +#define BOARD_BOOTCLOCKRUN_HCLK 260000000UL /* Clock consumers of hclk output : AHB_SECURE_CTRL, APU0, APU1, BLEAPU, BLECTRL, BUCK11, BUCK18, CACHE64_CTRL0, CACHE64_CTRL1, CACHE64_POLSEL0, CACHE64_POLSEL1, CAU, CDOG, CLKCTL0, CLKCTL1, CRC, CTIMER0, CTIMER1, CTIMER2, CTIMER3, DMA0, DMA1, DMIC0, ELS, ENET, FLEXCOMM0, FLEXCOMM1, FLEXCOMM14, FLEXCOMM2, FLEXCOMM3, FLEXSPI, FREQME, GAU_ACOMP, GAU_BG, GAU_DAC0, GAU_GPADC0, GAU_GPADC1, GDMA, GPIO, INPUTMUX, ITRC, LCDIC, MCI_IO_MUX, MRT0, MRT1, OCOTP, OSTIMER, PINT, PKC, PMU, POWERQUAD, PUF, ROMCP, RSTCTL0, RSTCTL1, RTC, SCT0, SDU_FBR_CARD, SDU_FN0_CARD, SDU_FN_CARD, SECGPIO, SENSOR_CTRL, SOCCTRL, SOC_OTP_CTRL, SYSCTL0, SYSCTL1, SYSCTL2, SysTick, TRNG, USBOTG, USIM, UTICK, WLAPU, WLCTRL, WWDT0 */ +#define BOARD_BOOTCLOCKRUN_LCD_FCLK 0UL /* Clock consumers of lcd_fclk output : LCDIC */ +#define BOARD_BOOTCLOCKRUN_LPOSC_CLK_I 1000000UL /* Clock consumers of lposc_clk_i output : N/A */ +#define BOARD_BOOTCLOCKRUN_MAIN_CLK 260000000UL /* Clock consumers of main_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_MAIN_PLL_CLK 260000000UL /* Clock consumers of main_pll_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_MCLK_OUT 0UL /* Clock consumers of mclk_out output : N/A */ +#define BOARD_BOOTCLOCKRUN_OSEVENT_FCLK 0UL /* Clock consumers of osevent_fclk output : OSTIMER */ +#define BOARD_BOOTCLOCKRUN_OTP_FUSE_32M_CLK 32000000UL /* Clock consumers of otp_fuse_32m_clk output : OCOTP */ +#define BOARD_BOOTCLOCKRUN_REFCLK_PHY 40000000UL /* Clock consumers of refclk_phy output : USBOTG */ +#define BOARD_BOOTCLOCKRUN_REFCLK_SYS 0UL /* Clock consumers of refclk_sys output : N/A */ +#define BOARD_BOOTCLOCKRUN_SCT_FCLK 0UL /* Clock consumers of sct_fclk output : SCT0 */ +#define BOARD_BOOTCLOCKRUN_SFRO_CLK_I 16000000UL /* Clock consumers of sfro_clk_i output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYSOSC_CLK_I 0UL /* Clock consumers of sysosc_clk_i output : N/A */ +#define BOARD_BOOTCLOCKRUN_SYSTICK_FCLK 260000000UL /* Clock consumers of systick_fclk output : SysTick */ +#define BOARD_BOOTCLOCKRUN_T3PLL_MCI_213P3M 0UL /* Clock consumers of t3pll_mci_213p3m output : N/A */ +#define BOARD_BOOTCLOCKRUN_T3PLL_MCI_256M 256000000UL /* Clock consumers of t3pll_mci_256m output : N/A */ +#define BOARD_BOOTCLOCKRUN_T3PLL_MCI_48_60M_IRC 48301886UL /* Clock consumers of t3pll_mci_48_60m_irc output : N/A */ +#define BOARD_BOOTCLOCKRUN_T3PLL_MCI_FLEXSPI_CLK 0UL /* Clock consumers of t3pll_mci_flexspi_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_TCPU_MCI_CLK 260000000UL /* Clock consumers of tcpu_mci_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_TCPU_MCI_FLEXSPI_CLK 0UL /* Clock consumers of tcpu_mci_flexspi_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_TDDR_MCI_ENET_CLK 0UL /* Clock consumers of tddr_mci_enet_clk output : ENET */ +#define BOARD_BOOTCLOCKRUN_TDDR_MCI_FLEXSPI_CLK 320000000UL /* Clock consumers of tddr_mci_flexspi_clk output : N/A */ +#define BOARD_BOOTCLOCKRUN_USIM_FCLK 0UL /* Clock consumers of usim_fclk output : USIM */ +#define BOARD_BOOTCLOCKRUN_UTICK_FCLK 0UL /* Clock consumers of utick_fclk output : UTICK */ +#define BOARD_BOOTCLOCKRUN_WDT0_FCLK 0UL /* Clock consumers of wdt0_fclk output : WWDT0 */ + +/*! @brief AVPLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_avpll_config_t avpllConfig_BOARD_BootClockRUN; +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + + +#endif /* _CLOCK_CONFIG_H_ */ + diff --git a/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c b/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c new file mode 100644 index 000000000..49b74b2bb --- /dev/null +++ b/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c @@ -0,0 +1,223 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v17.0 +processor: RW612 +package_id: RW612ETA2I +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: FRDM-RW612 +pin_labels: +- {pin_num: M2, pin_signal: GPIO_11, label: 'J1[6]/WAKEUP_BTN', identifier: WAKEUP;WAKEUP_BTN} +- {pin_num: L7, pin_signal: GPIO_5, label: 'J1[7]/MCLK', identifier: MCLKOUT} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_gpio.h" +#include "fsl_io_mux.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitPins(); + BOARD_InitDEBUG_UARTPins(); + BOARD_InitSWD_DEBUGPins(); + BOARD_InitLEDPins(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: cm33, enableClock: 'true'} +- pin_list: + - {pin_num: M2, peripheral: GPIO, signal: 'PIO0, 11', pin_signal: GPIO_11, identifier: WAKEUP_BTN, direction: INPUT} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 */ +void BOARD_InitPins(void) +{ + /* Enables the clock for the GPIO0 module */ + GPIO_PortInit(GPIO, 0); + + gpio_pin_config_t WAKEUP_BTN_config = { + .pinDirection = kGPIO_DigitalInput, + .outputLogic = 0U + }; + /* Initialize GPIO functionality on pin PIO0_11 (pin M2) */ + GPIO_PinInit(BOARD_INITPINS_WAKEUP_BTN_GPIO, BOARD_INITPINS_WAKEUP_BTN_PORT, BOARD_INITPINS_WAKEUP_BTN_PIN, &WAKEUP_BTN_config); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: cm33, enableClock: 'true'} +- pin_list: + - {pin_num: E5, peripheral: FLEXCOMM3, signal: USART_RXD, pin_signal: GPIO_24} + - {pin_num: F6, peripheral: FLEXCOMM3, signal: USART_TXD, pin_signal: GPIO_26} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 */ +void BOARD_InitDEBUG_UARTPins(void) +{ + /* Initialize FC3_USART_DATA functionality on pin GPIO_24, GPIO_26 (pin E5_F6) */ + IO_MUX_SetPinMux(IO_MUX_FC3_USART_DATA); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSWD_DEBUGPins: +- options: {callFromInitBoot: 'true', coreID: cm33, enableClock: 'true'} +- pin_list: + - {pin_num: G5, peripheral: SWD, signal: CLK, pin_signal: GPIO_13} + - {pin_num: K4, peripheral: SWD, signal: IO, pin_signal: GPIO_14} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSWD_DEBUGPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 */ +void BOARD_InitSWD_DEBUGPins(void) +{ + + MCI_IO_MUX->C_TIMER_IN = ((MCI_IO_MUX->C_TIMER_IN & + /* Mask bits to zero which are setting */ + (~(MCI_IO_MUX_C_TIMER_IN_CT_INP3_SEL_MASK | MCI_IO_MUX_C_TIMER_IN_CT_INP4_SEL_MASK))) + + /* sel GPIO-13 as ct_inp3: 0x00u */ + | MCI_IO_MUX_C_TIMER_IN_CT_INP3_SEL(0x00u) + /* sel GPIO-14 as ct_inp4: 0x00u */ + | MCI_IO_MUX_C_TIMER_IN_CT_INP4_SEL(0x00u)); + + MCI_IO_MUX->C_TIMER_OUT = ((MCI_IO_MUX->C_TIMER_OUT & + /* Mask bits to zero which are setting */ + (~(MCI_IO_MUX_C_TIMER_OUT_CT0MAT3_SEL_MASK | MCI_IO_MUX_C_TIMER_OUT_CT1MAT0_SEL_MASK))) + + /* sel GPIO-13 as ct0mat3: 0x00u */ + | MCI_IO_MUX_C_TIMER_OUT_CT0MAT3_SEL(0x00u) + /* sel GPIO-14 as ct1mat0: 0x00u */ + | MCI_IO_MUX_C_TIMER_OUT_CT1MAT0_SEL(0x00u)); + + MCI_IO_MUX->FC2 = + ((MCI_IO_MUX->FC2 & + /* Mask bits to zero which are setting */ + (~(MCI_IO_MUX_FC2_SEL_FC2_I2C_MASK | MCI_IO_MUX_FC2_SEL_FC2_I2S_MASK | MCI_IO_MUX_FC2_SEL_FC2_SPI_MASK | MCI_IO_MUX_FC2_SEL_FC2_I2S_DATA_ONLY_MASK | MCI_IO_MUX_FC2_SEL_FC2_USART_DATA_MASK))) + + /* flexcomm2:select GPIO-13/14 as i2c function: 0x00u */ + | MCI_IO_MUX_FC2_SEL_FC2_I2C(0x00u) + /* flexcomm2:select GPIO-13/14/15 as i2s function: 0x00u */ + | MCI_IO_MUX_FC2_SEL_FC2_I2S(0x00u) + /* flexcomm2:select GPIO-13/14/15/16 as spi function: 0x00u */ + | MCI_IO_MUX_FC2_SEL_FC2_SPI(0x00u) + /* flexcomm2:select GPIO-13 as i2s data function: 0x00u */ + | MCI_IO_MUX_FC2_SEL_FC2_I2S_DATA_ONLY(0x00u) + /* flexcomm2:select GPIO-13/14 as usart rxd/txd: 0x00u */ + | MCI_IO_MUX_FC2_SEL_FC2_USART_DATA(0x00u)); + + MCI_IO_MUX->GPIO_GRP0 = ((MCI_IO_MUX->GPIO_GRP0 & + /* Mask bits to zero which are setting */ + (~(MCI_IO_MUX_GPIO_GRP0_SEL_13_MASK | MCI_IO_MUX_GPIO_GRP0_SEL_14_MASK))) + + /* pio0[31:0] selection, high valid; sel[i]->pio0[i]->GPIO[i]: 0x00u */ + | MCI_IO_MUX_GPIO_GRP0_SEL(0x00u)); + + SOCCTRL->MCI_IOMUX_EN0 = ((SOCCTRL->MCI_IOMUX_EN0 & + /* Mask bits to zero which are setting */ + (~(SOCCIU_MCI_IOMUX_EN0_EN_21_0_13_MASK | SOCCIU_MCI_IOMUX_EN0_EN_21_0_14_MASK))) + + /* Bitwise enable control for mci_io_mux GPIO[21:0]: 0x00u */ + | SOCCIU_MCI_IOMUX_EN0_EN_21_0(0x00u)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLEDPins: +- options: {callFromInitBoot: 'true', coreID: cm33, enableClock: 'true'} +- pin_list: + - {pin_num: M1, peripheral: GPIO, signal: 'PIO0, 0', pin_signal: GPIO_0, direction: OUTPUT, gpio_init_state: 'true'} + - {pin_num: N2, peripheral: GPIO, signal: 'PIO0, 1', pin_signal: GPIO_1, direction: OUTPUT, gpio_init_state: 'true'} + - {pin_num: N8, peripheral: GPIO, signal: 'PIO0, 12', pin_signal: GPIO_12, direction: OUTPUT, gpio_init_state: 'true'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLEDPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +/* Function assigned for the Cortex-M33 */ +void BOARD_InitLEDPins(void) +{ + /* Enables the clock for the GPIO0 module */ + CLOCK_EnableClock(kCLOCK_HsGpio0); + + gpio_pin_config_t LED_BLUE_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO0_0 (pin M1) */ + GPIO_PinInit(BOARD_INITLEDPINS_LED_BLUE_GPIO, BOARD_INITLEDPINS_LED_BLUE_PORT, BOARD_INITLEDPINS_LED_BLUE_PIN, &LED_BLUE_config); + + gpio_pin_config_t LED_RED_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO0_1 (pin N2) */ + GPIO_PinInit(BOARD_INITLEDPINS_LED_RED_GPIO, BOARD_INITLEDPINS_LED_RED_PORT, BOARD_INITLEDPINS_LED_RED_PIN, &LED_RED_config); + + gpio_pin_config_t LED_GREEN_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO0_12 (pin N8) */ + GPIO_PinInit(BOARD_INITLEDPINS_LED_GREEN_GPIO, BOARD_INITLEDPINS_LED_GREEN_PORT, BOARD_INITLEDPINS_LED_GREEN_PIN, &LED_GREEN_config); + /* Initialize GPIO0 functionality on pin GPIO_0 (pin M1) */ + IO_MUX_SetPinMux(IO_MUX_GPIO0); + /* Initialize GPIO1 functionality on pin GPIO_1 (pin N2) */ + IO_MUX_SetPinMux(IO_MUX_GPIO1); + /* Initialize GPIO12 functionality on pin GPIO_12 (pin N8) */ + IO_MUX_SetPinMux(IO_MUX_GPIO12); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h b/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h new file mode 100644 index 000000000..f4c9a9127 --- /dev/null +++ b/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h @@ -0,0 +1,146 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/*! + * @brief mclk direction control: MCLK is in the output direction. */ +#define MCLKPINDIR_MCLKPINDIR_OUTPUT_DIRECTION 0x01u + +/*! @name GPIO_5 (coord L7), J1[7]/MCLK + @{ */ +/* Routed pin properties */ +#define BOARD_INITPINS_MCLKOUT_PERIPHERAL CLKCTL1 /*!<@brief Peripheral name */ +#define BOARD_INITPINS_MCLKOUT_SIGNAL MCLK /*!<@brief Signal name */ +#define BOARD_INITPINS_MCLKOUT_GPIO_PIN 5U /*!<@brief GPIO pin number */ +#define BOARD_INITPINS_MCLKOUT_PORT 0U /*!<@brief PORT number */ +#define BOARD_INITPINS_MCLKOUT_PIN 5U /*!<@brief PORT pin number */ +#define BOARD_INITPINS_MCLKOUT_PIN_MASK (1U << 5U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name GPIO_11 (coord M2), J1[6]/WAKEUP_BTN + @{ */ +/* Routed pin properties */ +#define BOARD_INITPINS_WAKEUP_BTN_PERIPHERAL GPIO /*!<@brief Peripheral name */ +#define BOARD_INITPINS_WAKEUP_BTN_SIGNAL PIO0 /*!<@brief Signal name */ +#define BOARD_INITPINS_WAKEUP_BTN_CHANNEL 11 /*!<@brief Signal channel */ +#define BOARD_INITPINS_WAKEUP_BTN_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITPINS_WAKEUP_BTN_GPIO_PIN 11U /*!<@brief GPIO pin number */ +#define BOARD_INITPINS_WAKEUP_BTN_PORT 0U /*!<@brief PORT number */ +#define BOARD_INITPINS_WAKEUP_BTN_PIN 11U /*!<@brief PORT pin number */ +#define BOARD_INITPINS_WAKEUP_BTN_PIN_MASK (1U << 11U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief + * + */ +void BOARD_InitPins(void); /* Function assigned for the Cortex-M33 */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); /* Function assigned for the Cortex-M33 */ + +/*! + * @brief pio0[31:0] selection, high valid; sel[i]->pio0[i]->GPIO[i] Mask for item 13. */ +#define MCI_IO_MUX_GPIO_GRP0_SEL_13_MASK 0x2000u +/*! + * @brief pio0[31:0] selection, high valid; sel[i]->pio0[i]->GPIO[i] Mask for item 14. */ +#define MCI_IO_MUX_GPIO_GRP0_SEL_14_MASK 0x4000u +/*! + * @brief Bitwise enable control for mci_io_mux GPIO[21:0] Mask for item 13. */ +#define SOCCIU_MCI_IOMUX_EN0_EN_21_0_13_MASK 0x2000u +/*! + * @brief Bitwise enable control for mci_io_mux GPIO[21:0] Mask for item 14. */ +#define SOCCIU_MCI_IOMUX_EN0_EN_21_0_14_MASK 0x4000u + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSWD_DEBUGPins(void); /* Function assigned for the Cortex-M33 */ + +/*! @name GPIO_0 (coord M1), J1[14]/LED_BLUE + @{ */ +/* Routed pin properties */ +#define BOARD_INITLEDPINS_LED_BLUE_PERIPHERAL GPIO /*!<@brief Peripheral name */ +#define BOARD_INITLEDPINS_LED_BLUE_SIGNAL PIO0 /*!<@brief Signal name */ +#define BOARD_INITLEDPINS_LED_BLUE_CHANNEL 0 /*!<@brief Signal channel */ +#define BOARD_INITLEDPINS_LED_BLUE_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDPINS_LED_BLUE_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDPINS_LED_BLUE_GPIO_PIN 0U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDPINS_LED_BLUE_PORT 0U /*!<@brief PORT number */ +#define BOARD_INITLEDPINS_LED_BLUE_PIN 0U /*!<@brief PORT pin number */ +#define BOARD_INITLEDPINS_LED_BLUE_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name GPIO_1 (coord N2), J5[1]/LED_RED + @{ */ +/* Routed pin properties */ +#define BOARD_INITLEDPINS_LED_RED_PERIPHERAL GPIO /*!<@brief Peripheral name */ +#define BOARD_INITLEDPINS_LED_RED_SIGNAL PIO0 /*!<@brief Signal name */ +#define BOARD_INITLEDPINS_LED_RED_CHANNEL 1 /*!<@brief Signal channel */ +#define BOARD_INITLEDPINS_LED_RED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDPINS_LED_RED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDPINS_LED_RED_GPIO_PIN 1U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDPINS_LED_RED_PORT 0U /*!<@brief PORT number */ +#define BOARD_INITLEDPINS_LED_RED_PIN 1U /*!<@brief PORT pin number */ +#define BOARD_INITLEDPINS_LED_RED_PIN_MASK (1U << 1U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name GPIO_12 (coord N8), LED_GREEN + @{ */ +/* Routed pin properties */ +#define BOARD_INITLEDPINS_LED_GREEN_PERIPHERAL GPIO /*!<@brief Peripheral name */ +#define BOARD_INITLEDPINS_LED_GREEN_SIGNAL PIO0 /*!<@brief Signal name */ +#define BOARD_INITLEDPINS_LED_GREEN_CHANNEL 12 /*!<@brief Signal channel */ +#define BOARD_INITLEDPINS_LED_GREEN_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDPINS_LED_GREEN_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDPINS_LED_GREEN_GPIO_PIN 12U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDPINS_LED_GREEN_PORT 0U /*!<@brief PORT number */ +#define BOARD_INITLEDPINS_LED_GREEN_PIN 12U /*!<@brief PORT pin number */ +#define BOARD_INITLEDPINS_LED_GREEN_PIN_MASK (1U << 12U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLEDPins(void); /* Function assigned for the Cortex-M33 */ + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/rw61x/family.c b/hw/bsp/rw61x/family.c new file mode 100644 index 000000000..226956f15 --- /dev/null +++ b/hw/bsp/rw61x/family.c @@ -0,0 +1,135 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2025, Gabriel Koppenstein + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: NXP +*/ + +#include "bsp/board_api.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "board.h" +#include "fsl_usart.h" +#include "fsl_clock.h" + +#include "pin_mux.h" +#include "clock_config.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +void USB_IRQHandler(void) { + tusb_int_handler(1, true); +} + +void board_init(void) { + + // Init button pin, LED pins, SWD pins & UART pins + BOARD_InitBootPins(); + + // Init Clocks + BOARD_InitBootClocks(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // Explicitly disable systick to prevent its ISR from running before scheduler start + SysTick->CTRL &= ~1U; + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + +#ifdef NEOPIXEL_PIN + // No neo pixel support yet +#endif + +#ifdef UART_DEV + // Enable UART when debug log is on + board_uart_init_clock(); + usart_config_t uart_config; + USART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableRx = true; + uart_config.enableTx = true; + USART_Init(UART_DEV, &uart_config, CLOCK_GetFlexCommClkFreq(LP_FLEXCOMM_INST)); +#endif + + // USB Initialization + // Reset USB + RESET_PeripheralReset(kUSB_RST_SHIFT_RSTn); + + // Enable USB Clock + CLOCK_EnableClock(kCLOCK_Usb); + + // Enable USB PHY + CLOCK_EnableUsbhsPhyClock(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + GPIO_PinWrite(LED_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { +#ifdef BUTTON_GPIO + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BOARD_INITPINS_WAKEUP_BTN_PORT, BUTTON_PIN); +#endif +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { +#ifdef UART_DEV + USART_WriteBlocking(UART_DEV, (uint8_t const*) buf, len); + return len; +#else + (void) buf; (void) len; + return 0; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif diff --git a/hw/bsp/rw61x/family.cmake b/hw/bsp/rw61x/family.cmake new file mode 100644 index 000000000..5428b7e50 --- /dev/null +++ b/hw/bsp/rw61x/family.cmake @@ -0,0 +1,102 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m33-nodsp-nofp CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS RW61X CACHE INTERNAL "") + +#------------------------------------ +# Startup & Linker script +#------------------------------------ + +set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) +set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c + ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c + ${SDK_DIR}/drivers/common/fsl_common_arm.c + ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c + ${SDK_DIR}/drivers/flexcomm/usart/fsl_usart.c + ${SDK_DIR}/drivers/flexspi/fsl_flexspi.c + ) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_5}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${SDK_DIR}/drivers + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/lpc_gpio + ${SDK_DIR}/drivers/flexcomm + ${SDK_DIR}/drivers/flexcomm/usart + ${SDK_DIR}/drivers/flexspi + ) + + update_board(${BOARD_TARGET}) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_RW61X) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + + # ChipIdea HS + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c + ${TOP}/src/portable/ehci/ehci.c + + # Startup File + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + # Add Board specific includes + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Linker Options + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs + --specs=nano.specs + ) + endif() + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + + # Handle Startup File Properties (Linting/Warnings) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w + ) + + # Flashing & Binary Generation + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() \ No newline at end of file diff --git a/hw/bsp/rw61x/family.mk b/hw/bsp/rw61x/family.mk new file mode 100644 index 000000000..e715adfa8 --- /dev/null +++ b/hw/bsp/rw61x/family.mk @@ -0,0 +1,52 @@ +UF2_FAMILY_ID = 0x2abc77ec +SDK_DIR = hw/mcu/nxp/mcux-sdk + +include $(TOP)/$(BOARD_PATH)/board.mk + +# Default to Highspeed PORT1 +PORT ?= 1 + +CFLAGS += \ + -flto \ + -DBOARD_TUD_RHPORT=$(PORT) \ + -DBOARD_TUH_RHPORT=$(PORT) \ + -DSERIAL_PORT_TYPE_UART=1 \ + -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED \ + -DBOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED \ + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration -Wno-error=redundant-decls + +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + +# All source paths should be relative to the top level. +LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld + +SRC_C += \ + src/portable/chipidea/ci_hs/dcd_ci_hs.c \ + src/portable/chipidea/ci_hs/hcd_ci_hs.c \ + src/portable/ehci/ehci.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/system_$(MCU_CORE).c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_clock.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_reset.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_power.c \ + $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/common/fsl_common_arm.c\ + $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ + $(SDK_DIR)/drivers/flexcomm/usart/fsl_usart.c \ + $(SDK_DIR)/drivers/flexspi/fsl_flexspi.c \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT) \ + $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/ \ + $(TOP)/$(SDK_DIR)/drivers/common\ + $(TOP)/$(SDK_DIR)/drivers/lpc_gpio\ + $(TOP)/$(SDK_DIR)/drivers/flexcomm \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm/usart \ + $(TOP)/$(SDK_DIR)/drivers/flexspi \ + + +SRC_S += $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/startup_$(MCU_CORE).S diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index b5324a754..fe2895f6a 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -61,6 +61,9 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { #include "ci_hs_lpc18_43.h" +#elif TU_CHECK_MCU(OPT_MCU_RW61X) +#include "ci_hs_rw61x.h" + #else #error "Unsupported MCUs" #endif diff --git a/tools/get_deps.py b/tools/get_deps.py index 0d9c1a8f1..17c2ab8b8 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -60,7 +60,7 @@ deps_optional = { 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43'], 'hw/mcu/nxp/mcux-sdk': ['https://github.com/nxp-mcuxpresso/mcux-sdk', 'a1bdae309a14ec95a4f64a96d3315a4f89c397c6', - 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], + 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx rw61x imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', '675543bcc9baa8170f868ab7ba316d418dbcf41f', 'rp2040'], @@ -246,7 +246,7 @@ deps_optional = { 'at32f413'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', - 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' + 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx rw61x mm32 msp432e4 nrf saml2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' 'stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32u0 stm32u5 stm32wb stm32wba ' -- cgit v1.3.1 From dd78e2eeb5b4970e05e2ca5e6168befa5e9a2b80 Mon Sep 17 00:00:00 2001 From: gab-k Date: Sun, 14 Dec 2025 01:42:43 +0100 Subject: Update README --- README.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.rst b/README.rst index 463cc8b42..95943de8e 100644 --- a/README.rst +++ b/README.rst @@ -209,7 +209,7 @@ Supported CPUs | | +-------------------+--------+------+-----------+------------------------+-------------------+ | | | A15 | ✔ | | | ci_fs | | | +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | RW61x | ✔ | | ✔ | ci_hs, ehci | | +| | RW61x | ✔ | ✔ | ✔ | ci_hs, ehci | | +--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ | Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | +--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -- cgit v1.3.1 From 1583864e0b1379cc2f03717f1bed2429e5473407 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 15 Dec 2025 13:28:24 +0700 Subject: minor clean up --- README.rst | 260 +++++++++++++------------- examples/host/bare_api/only.txt | 15 +- examples/host/cdc_msc_hid/only.txt | 15 +- examples/host/cdc_msc_hid_freertos/only.txt | 13 +- examples/host/device_info/only.txt | 13 +- examples/host/hid_controller/only.txt | 15 +- examples/host/midi_rx/only.txt | 13 +- examples/host/msc_file_explorer/only.txt | 15 +- hw/bsp/stm32u5/family.mk | 6 +- src/device/usbd.c | 6 +- src/portable/st/stm32_fsdev/fsdev_common.c | 16 +- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 10 +- 12 files changed, 211 insertions(+), 186 deletions(-) diff --git a/README.rst b/README.rst index 75f93f656..da1f49fcd 100644 --- a/README.rst +++ b/README.rst @@ -129,138 +129,134 @@ TinyUSB is completely thread-safe by pushing all Interrupt Service Request (ISR) Supported CPUs -------------- -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | -+==============+=============================+========+======+===========+========================+========================+ -| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | MAX32 650, 666, 690, | ✔ | | ✔ | musb | 1-dir ep | -| | MAX78002 | | | | | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Artery AT32 | F403a_407, F413 | ✔ | | | fsdev | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | F415, F435_437, F423, F425 | ✔ | ✔ | | dwc2 | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | F402_F405 | ✔ | ✔ | ✔ | dwc2 | F405 is HS | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Bridgetek | FT90x | ✔ | | ✔ | ft9xx | 1-dir ep | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Espressif | S2, S3 | ✔ | ✔ | ✖ | dwc2 | | -| ESP32 +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | P4 | ✔ | ✔ | ✔ | dwc2 | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | H4 | ✔ | ✔ | ✖ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Infineon | XMC4500 | ✔ | ✔ | ✖ | dwc2 | | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ -| MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | -| | +-----------------------+--------+------+-----------+------------------------+------------------------+ -| | | D51, E5x | ✔ | | ✖ | samd | | -| | +-----------------------+--------+------+-----------+------------------------+------------------------+ -| | | G55 | ✔ | | ✖ | samg | 1-dir ep | -| | +-----------------------+--------+------+-----------+------------------------+------------------------+ -| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | 1-dir ep | -| +-----+-----------------------+--------+------+-----------+------------------------+------------------------+ -| | PIC | 24 | ✔ | | | pic | ci_fs variant | -| | +-----------------------+--------+------+-----------+------------------------+------------------------+ -| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant | -| | +-----------------------+--------+------+-----------+------------------------+------------------------+ -| | | dsPIC33 | ✔ | | | pic | ci_fs variant | -| | +-----------------------+--------+------+-----------+------------------------+------------------------+ -| | | 32mz | ✔ | | | pic32mz | musb variant | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ -| MindMotion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ -| NordicSemi | nRF 52833, 52840, 5340 | ✔ | ✖ | ✖ | nrf5x | only ep8 is IO | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | NUC121/NUC125 | ✔ | ✖ | ✖ | nuc121 | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | NUC126 | ✔ | ✖ | ✖ | nuc121 | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | NUC505 | ✔ | | ✔ | nuc505 | | -+--------------+---------+-------------------+--------+------+-----------+------------------------+------------------------+ -| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs, ehci | | -| +---------+-------------------+--------+------+-----------+------------------------+------------------------+ -| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | -| | +-------------------+--------+------+-----------+------------------------+------------------------+ -| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant | -| +---------+-------------------+--------+------+-----------+------------------------+------------------------+ -| | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | -| | +-------------------+--------+------+-----------+------------------------+------------------------+ -| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40, ohci | | -| | +-------------------+--------+------+-----------+------------------------+------------------------+ -| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs, ehci | | -| | +-------------------+--------+------+-----------+------------------------+------------------------+ -| | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | -| | +-------------------+--------+------+-----------+------------------------+------------------------+ -| | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | -| +---------+-------------------+--------+------+-----------+------------------------+------------------------+ -| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs, ehci | | -| | +-------------------+--------+------+-----------+------------------------+------------------------+ -| | | A15 | ✔ | | | ci_fs | | -+--------------+---------+-------------------+--------+------+-----------+------------------------+------------------------+ -| Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ -| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | -| +-----+-----------------------+--------+------+-----------+------------------------+------------------------+ -| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | -| | +-----------------------+--------+------+-----------+------------------------+------------------------+ -| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+------------------------+ -| Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| ST STM32 | F0, F3, L0, L1, L5, WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------------+--------+------+-----------+------------------------+------------------------+ -| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | | -| | +------------------------+--------+------+-----------+------------------------+------------------------+ -| | | 105, 107 | ✔ | ✔ | ✖ | dwc2 | | -| +----+------------------------+--------+------+-----------+------------------------+------------------------+ -| | F2, F4, F7, H7, H7RS | ✔ | ✔ | ✔ | dwc2 | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | C0, G0, H5 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0, H5 | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------------+--------+------+-----------+------------------------+------------------------+ -| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | -| | +------------------------+--------+------+-----------+------------------------+------------------------+ -| | | 4x5, 4x6, 4+ | ✔ | ✔ | ✖ | dwc2 | | -| +----+------------------------+--------+------+-----------+------------------------+------------------------+ -| | N6 | ✔ | ✔ | ✔ | dwc2 | | -| +----+------------------------+--------+------+-----------+------------------------+------------------------+ -| | U0 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------------+--------+------+-----------+------------------------+------------------------+ -| | U3 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0, H5 | -| +----+------------------------+--------+------+-----------+------------------------+------------------------+ -| | U5 | 535, 545 | ✔ | ✔ | ✖ | stm32_fsdev | Host tested on C0, H5 | -| | +------------------------+--------+------+-----------+------------------------+------------------------+ -| | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | -| | +------------------------+--------+------+-----------+------------------------+------------------------+ -| | | 59x,5Ax,5Fx,5Gx | ✔ | ✔ | ✔ | dwc2 | | -+--------------+----+------------------------+--------+------+-----------+------------------------+------------------------+ -| TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | MSP432E4, TM4C123 | ✔ | | ✖ | musb | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ -| WCH | CH32F20x | ✔ | | ✔ | ch32_usbhs | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | CH32V20x | ✔ | | ✖ | stm32_fsdev/ch32_usbfs | | -| +-----------------------------+--------+------+-----------+------------------------+------------------------+ -| | CH32V305, CH32V307 | ✔ | | ✔ | ch32_usbfs/hs | | -+--------------+-----------------------------+--------+------+-----------+------------------------+------------------------+ ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | ++==============+=============================+========+======+===========+========================+====================+ +| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | MAX32 650, 666, 690, | ✔ | | ✔ | musb | 1-dir ep | +| | MAX78002 | | | | | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Artery AT32 | F403a_407, F413 | ✔ | | | fsdev | Packet SRAM 512 | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | F415, F435_437, F423, F425 | ✔ | ✔ | | dwc2 | | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | F402_F405 | ✔ | ✔ | ✔ | dwc2 | F405 is HS | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Bridgetek | FT90x | ✔ | | ✔ | ft9xx | 1-dir ep | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Espressif | S2, S3 | ✔ | ✔ | ✖ | dwc2 | | +| ESP32 +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | P4 | ✔ | ✔ | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | H4 | ✔ | ✔ | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Infineon | XMC4500 | ✔ | ✔ | ✖ | dwc2 | | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+--------------------+ +| MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | +| | +-----------------------+--------+------+-----------+------------------------+--------------------+ +| | | D51, E5x | ✔ | | ✖ | samd | | +| | +-----------------------+--------+------+-----------+------------------------+--------------------+ +| | | G55 | ✔ | | ✖ | samg | 1-dir ep | +| | +-----------------------+--------+------+-----------+------------------------+--------------------+ +| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | 1-dir ep | +| +-----+-----------------------+--------+------+-----------+------------------------+--------------------+ +| | PIC | 24 | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+------------------------+--------------------+ +| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+------------------------+--------------------+ +| | | dsPIC33 | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+------------------------+--------------------+ +| | | 32mz | ✔ | | | pic32mz | musb variant | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+--------------------+ +| MindMotion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+--------------------+ +| NordicSemi | nRF 52833, 52840, 5340 | ✔ | ✖ | ✖ | nrf5x | only ep8 is ISO | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | NUC121/NUC125, NUC126 | ✔ | ✖ | ✖ | nuc121 | | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | NUC505 | ✔ | | ✔ | nuc505 | | ++--------------+---------+-------------------+--------+------+-----------+------------------------+--------------------+ +| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs, ehci | | +| +---------+-------------------+--------+------+-----------+------------------------+--------------------+ +| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | +| | +-------------------+--------+------+-----------+------------------------+--------------------+ +| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant | +| +---------+-------------------+--------+------+-----------+------------------------+--------------------+ +| | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------------+--------+------+-----------+------------------------+--------------------+ +| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40, ohci | | +| | +-------------------+--------+------+-----------+------------------------+--------------------+ +| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs, ehci | | +| | +-------------------+--------+------+-----------+------------------------+--------------------+ +| | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------------+--------+------+-----------+------------------------+--------------------+ +| | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | +| +---------+-------------------+--------+------+-----------+------------------------+--------------------+ +| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs, ehci | | +| | +-------------------+--------+------+-----------+------------------------+--------------------+ +| | | A15 | ✔ | | | ci_fs | | ++--------------+---------+-------------------+--------+------+-----------+------------------------+--------------------+ +| Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+--------------------+ +| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | +| +-----+-----------------------+--------+------+-----------+------------------------+--------------------+ +| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | +| | +-----------------------+--------+------+-----------+------------------------+--------------------+ +| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+--------------------+ +| Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| ST STM32 | F0, F3, L0, L1, L5, WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+------------------------+--------------------+ +| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | Packet SRAM 512 | +| | +------------------------+--------+------+-----------+------------------------+--------------------+ +| | | 105, 107 | ✔ | ✔ | ✖ | dwc2 | | +| +----+------------------------+--------+------+-----------+------------------------+--------------------+ +| | F2, F4, F7, H7, H7RS | ✔ | ✔ | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | C0, G0, H5, U3 | ✔ | ✔ | ✖ | stm32_fsdev | Packet SRAM 2KB | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | Packet SRAM 1KB | +| +----+------------------------+--------+------+-----------+------------------------+--------------------+ +| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | Packet SRAM 1KB | +| | +------------------------+--------+------+-----------+------------------------+--------------------+ +| | | 4x5, 4x6, 4+ | ✔ | ✔ | ✖ | dwc2 | | +| +----+------------------------+--------+------+-----------+------------------------+--------------------+ +| | N6 | ✔ | ✔ | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | U0 | ✔ | ✖ | ✖ | stm32_fsdev | Packet SRAM 1KB | +| +----+------------------------+--------+------+-----------+------------------------+--------------------+ +| | U5 | 535, 545 | ✔ | ✔ | ✖ | stm32_fsdev | Packet SRAM 2KB | +| | +------------------------+--------+------+-----------+------------------------+--------------------+ +| | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | +| | +------------------------+--------+------+-----------+------------------------+--------------------+ +| | | 59x,5Ax,5Fx,5Gx | ✔ | ✔ | ✔ | dwc2 | | ++--------------+----+------------------------+--------+------+-----------+------------------------+--------------------+ +| TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | MSP432E4, TM4C123 | ✔ | | ✖ | musb | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| WCH | CH32F20x | ✔ | | ✔ | ch32_usbhs | | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | CH32V20x | ✔ | | ✖ | stm32_fsdev/ch32_usbfs | | +| +-----------------------------+--------+------+-----------+------------------------+--------------------+ +| | CH32V305, CH32V307 | ✔ | | ✔ | ch32_usbfs/hs | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ Table Legend ^^^^^^^^^^^^ diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 4cd457879..52e51242c 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -1,3 +1,5 @@ +family:samd21 +family:samd5x_e5x mcu:CH32V20X mcu:KINETIS_KL mcu:LPC175X_6X @@ -5,20 +7,21 @@ mcu:LPC177X_8X mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX -mcu:MIMXRT1XXX +mcu:MAX3421 mcu:MIMXRT10XX mcu:MIMXRT11XX -mcu:RP2040 +mcu:MIMXRT1XXX mcu:MSP432E4 -mcu:RX65X mcu:RAXXX -mcu:MAX3421 +mcu:RP2040 +mcu:RX65X mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32G0 mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 -family:samd21 -family:samd5x_e5x +mcu:STM32U3 +mcu:STM32U5 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 4cd457879..52e51242c 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -1,3 +1,5 @@ +family:samd21 +family:samd5x_e5x mcu:CH32V20X mcu:KINETIS_KL mcu:LPC175X_6X @@ -5,20 +7,21 @@ mcu:LPC177X_8X mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX -mcu:MIMXRT1XXX +mcu:MAX3421 mcu:MIMXRT10XX mcu:MIMXRT11XX -mcu:RP2040 +mcu:MIMXRT1XXX mcu:MSP432E4 -mcu:RX65X mcu:RAXXX -mcu:MAX3421 +mcu:RP2040 +mcu:RX65X mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32G0 mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 -family:samd21 -family:samd5x_e5x +mcu:STM32U3 +mcu:STM32U5 diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 2322d4ecf..4cff741c3 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -1,21 +1,24 @@ +family:espressif +family:samd21 +family:samd5x_e5x mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX -mcu:MIMXRT1XXX +mcu:MAX3421 mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:MIMXRT1XXX mcu:MSP432E4 mcu:RX65X -mcu:MAX3421 mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32G0 mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 -family:espressif -family:samd21 -family:samd5x_e5x +mcu:STM32U3 +mcu:STM32U5 diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index 5b68f0774..becc8252d 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,3 +1,6 @@ +family:espressif +family:samd21 +family:samd5x_e5x mcu:CH32V20X mcu:KINETIS_KL mcu:LPC175X_6X @@ -6,20 +9,20 @@ mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX mcu:MAX3421 -mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:MIMXRT1XXX mcu:MSP432E4 +mcu:RAXXX mcu:RP2040 mcu:RX65X -mcu:RAXXX mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32G0 mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 -family:espressif -family:samd21 -family:samd5x_e5x +mcu:STM32U3 +mcu:STM32U5 diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index b859b4cc0..35b7c2361 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -1,3 +1,5 @@ +family:samd21 +family:samd5x_e5x mcu:CH32V20X mcu:KINETIS_KL mcu:LPC175X_6X @@ -5,19 +7,20 @@ mcu:LPC177X_8X mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX -mcu:MIMXRT1XXX +mcu:MAX3421 mcu:MIMXRT10XX mcu:MIMXRT11XX -mcu:RP2040 +mcu:MIMXRT1XXX mcu:MSP432E4 -mcu:RX65X mcu:RAXXX -mcu:MAX3421 +mcu:RP2040 +mcu:RX65X mcu:STM32F4 mcu:STM32F7 +mcu:STM32G0 mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 -family:samd21 -family:samd5x_e5x +mcu:STM32U3 +mcu:STM32U5 diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index 09d725860..a3976f08d 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -1,7 +1,9 @@ +family:samd21 +family:samd5x_e5x mcu:CH32V20X +mcu:ESP32P4 mcu:ESP32S2 mcu:ESP32S3 -mcu:ESP32P4 mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X @@ -9,19 +11,20 @@ mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX mcu:MAX3421 -mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX +mcu:MIMXRT1XXX mcu:MSP432E4 +mcu:RAXXX mcu:RP2040 mcu:RX65X -mcu:RAXXX mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32G0 mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 -family:samd21 -family:samd5x_e5x +mcu:STM32U3 +mcu:STM32U5 diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 4cd457879..52e51242c 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -1,3 +1,5 @@ +family:samd21 +family:samd5x_e5x mcu:CH32V20X mcu:KINETIS_KL mcu:LPC175X_6X @@ -5,20 +7,21 @@ mcu:LPC177X_8X mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX -mcu:MIMXRT1XXX +mcu:MAX3421 mcu:MIMXRT10XX mcu:MIMXRT11XX -mcu:RP2040 +mcu:MIMXRT1XXX mcu:MSP432E4 -mcu:RX65X mcu:RAXXX -mcu:MAX3421 +mcu:RP2040 +mcu:RX65X mcu:STM32C0 mcu:STM32F4 mcu:STM32F7 +mcu:STM32G0 mcu:STM32H5 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 -family:samd21 -family:samd5x_e5x +mcu:STM32U3 +mcu:STM32U5 diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 79f181a68..47aed10a9 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -37,11 +37,7 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c -ifeq ($(MCU_VARIANT),stm32u545xx) -SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ - src/portable/st/stm32_fsdev/fsdev_common.c -else ifeq ($(MCU_VARIANT),stm32u535xx) +ifneq ($(filter stm32u545xx stm32u535xx,$(MCU_VARIANT)),) SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ src/portable/st/stm32_fsdev/fsdev_common.c diff --git a/src/device/usbd.c b/src/device/usbd.c index 5365ae2c2..1a9eb630c 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -574,6 +574,8 @@ bool tud_deinit(uint8_t rhport) { TU_LOG_USBD("USBD deinit on controller %u\r\n", rhport); + const uint8_t cfg_num = _usbd_dev.cfg_num; + // Deinit device controller driver dcd_int_disable(rhport); dcd_disconnect(rhport); @@ -604,7 +606,9 @@ bool tud_deinit(uint8_t rhport) { _usbd_rhport = RHPORT_INVALID; - tud_umount_cb(); + if (cfg_num > 0) { + tud_umount_cb(); + } return true; } diff --git a/src/portable/st/stm32_fsdev/fsdev_common.c b/src/portable/st/stm32_fsdev/fsdev_common.c index 60ef339a6..5d60ad9a2 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.c +++ b/src/portable/st/stm32_fsdev/fsdev_common.c @@ -78,7 +78,9 @@ void fsdev_deinit(void) { // - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT // - Uses unaligned for RAM (since M0 cannot access unaligned address) bool fsdev_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes) { - if (nbytes == 0) return true; + if (nbytes == 0) { + return true; + } uint32_t n_write = nbytes / FSDEV_BUS_SIZE; fsdev_pma_buf_t* pma_buf = PMA_BUF_AT(dst); @@ -107,7 +109,9 @@ bool fsdev_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_ // - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT // - Uses unaligned for RAM (since M0 cannot access unaligned address) bool fsdev_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes) { - if (nbytes == 0) return true; + if (nbytes == 0) { + return true; + } uint32_t n_read = nbytes / FSDEV_BUS_SIZE; fsdev_pma_buf_t* pma_buf = PMA_BUF_AT(src); @@ -134,7 +138,9 @@ bool fsdev_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbyte // Write to PMA from FIFO bool fsdev_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes) { - if (wNBytes == 0) return true; + if (wNBytes == 0) { + return true; + } // Since we copy from a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies tu_fifo_buffer_info_t info; @@ -183,7 +189,9 @@ bool fsdev_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes) // Read from PMA to FIFO bool fsdev_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes) { - if (wNBytes == 0) return true; + if (wNBytes == 0) { + return true; + } // Since we copy into a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies // Check for first linear part diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 212f620ac..da9c6961c 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -28,11 +28,11 @@ * This driver provides USB Host controller support for STM32 MCUs with "USB A"/"PCD"/"HCD" peripheral. * This covers these MCU families: * - * C0 2048 byte buffer; 32-bit bus; host mode - * G0 2048 byte buffer; 32-bit bus; host mode - * U3 2048 byte buffer; 32-bit bus; host mode - * H5 2048 byte buffer; 32-bit bus; host mode - * U535, U545 2048 byte buffer; 32-bit bus; host mode + * C0 2048 byte buffer; 32-bit bus; host mode + * G0 2048 byte buffer; 32-bit bus; host mode + * U3 2048 byte buffer; 32-bit bus; host mode + * H5 2048 byte buffer; 32-bit bus; host mode + * U535, U545 2048 byte buffer; 32-bit bus; host mode * */ -- cgit v1.3.1 From ebf7ce76ccd32436d6fc3688226709886ddc81e4 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 15 Dec 2025 17:15:39 +0700 Subject: minor update --- src/host/usbh.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index 5950aee11..e99d9e977 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -312,8 +312,8 @@ TU_ATTR_ALWAYS_INLINE static inline usbh_class_driver_t const *get_driver(uint8_ // Function Inline and Prototypes //--------------------------------------------------------------------+ static bool enum_new_device(hcd_event_t* event); -static void process_detach_event(hcd_event_t* event); -static void process_removed_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port); +static void process_remove_event(hcd_event_t *event); +static void remove_device_tree(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port); static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); @@ -541,8 +541,8 @@ bool tuh_deinit(uint8_t rhport) { hcd_deinit(rhport); _usbh_data.controller_id = TUSB_INDEX_INVALID_8; - // "unplug" all devices on this rhport (hub_addr = 0, hub_port = 0) - process_removed_device(rhport, 0, 0); + // remove all devices on this rhport (hub_addr = 0, hub_port = 0) + remove_device_tree(rhport, 0, 0); // deinit host stack if no controller is active if (!tuh_inited()) { @@ -606,10 +606,10 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { switch (event.event_id) { case HCD_EVENT_DEVICE_ATTACH: - // We have likely missed the hub detach event due to high traffic, detach the device first if exists - // Or due to physical debouncing, some devices can cause multiple attaches (actually reset) without detach event + // Should we miss the hub detach event due to high traffic, Or due to physical debouncing, some devices can + // cause multiple attaches (actually reset) without detach event. // Force remove currently mounted with the same bus info (rhport, hub addr, hub port) if exists - process_detach_event(&event); + process_remove_event(&event); // due to the shared control buffer, we must fully complete enumerating one device first. // TODO better to have an separated queue for newly attached devices @@ -631,7 +631,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { case HCD_EVENT_DEVICE_REMOVE: TU_LOG_USBH("[%u:%u:%u] USBH DEVICE REMOVED\r\n", event.rhport, event.connection.hub_addr, event.connection.hub_port); - process_detach_event(&event); + process_remove_event(&event); break; case HCD_EVENT_XFER_COMPLETE: { @@ -1321,7 +1321,7 @@ bool tuh_interface_set(uint8_t daddr, uint8_t itf_num, uint8_t itf_alt, //--------------------------------------------------------------------+ // process detach event from rhport:hub_addr:hub_port -static void process_detach_event(hcd_event_t* event) { +static void process_remove_event(hcd_event_t *event) { if (_usbh_data.enumerating_daddr == 0 && event->rhport == _usbh_data.dev0_bus.rhport && event->connection.hub_addr == _usbh_data.dev0_bus.hub_addr && @@ -1329,12 +1329,12 @@ static void process_detach_event(hcd_event_t* event) { // dev0 is unplugged while enumerating (not yet assigned an address) usbh_device_close(_usbh_data.dev0_bus.rhport, 0); } else { - process_removed_device(event->rhport, event->connection.hub_addr, event->connection.hub_port); + remove_device_tree(event->rhport, event->connection.hub_addr, event->connection.hub_port); } } -// a device unplugged from rhport:hub_addr:hub_port -static void process_removed_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port) { +// remove a device at rhport:hub_addr:hub_port and all of its downstream +static void remove_device_tree(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port) { // Find the all devices (star-network) under port that is unplugged #if CFG_TUH_HUB uint8_t removing_hubs[CFG_TUH_HUB] = { 0 }; @@ -1925,6 +1925,7 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { } static void enum_full_complete(bool success) { + (void)success; // mark enumeration as complete _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; @@ -1933,8 +1934,6 @@ static void enum_full_complete(bool success) { if (_usbh_data.dev0_bus.hub_addr != 0 && !success) { hub_edpt_status_xfer(_usbh_data.dev0_bus.hub_addr); // get next hub status } -#else - (void) success; #endif } -- cgit v1.3.1 From 0a9e05f47adca971eb4af8b08adf0debbc6b83db Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 16 Dec 2025 00:19:13 +0700 Subject: make fifo access mode fixed addr work with 16 bit also --- src/common/tusb_fifo.c | 106 ++++++++++++++++++++++++------------------ src/common/tusb_fifo.h | 19 +++++++- src/osal/osal_none.h | 2 +- test/unit-test/CMakeLists.txt | 2 +- test/unit-test/project.yml | 2 +- 5 files changed, 80 insertions(+), 51 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index e97b6ccce..450c31f57 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -114,40 +114,54 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { // Pull & Push // copy data to/from fifo without updating read/write pointers //--------------------------------------------------------------------+ -#ifdef CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_RW32 +#if CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH + #if CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH == 32 + #define fixed_unaligned_write tu_unaligned_write32 + #define fixed_unaligned_read tu_unaligned_read32 +typedef uint32_t fixed_access_item_t; + #elif CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH == 16 + #define fixed_unaligned_write tu_unaligned_write16 + #define fixed_unaligned_read tu_unaligned_read16 +typedef uint16_t fixed_access_item_t; + #endif + +enum { + FIXED_ACCESS_REMAINDER_MASK = sizeof(fixed_access_item_t) - 1u +}; + // Copy to fifo from fixed address buffer (usually a rx register) with TU_FIFO_FIXED_ADDR_RW32 mode -static void ff_push_fixed_addr_rw32(uint8_t *ff_buf, const volatile uint32_t *reg_rx, uint16_t len) { - // Reading full available 32 bit words from const app address - uint16_t full_words = len >> 2; - while (full_words--) { - const uint32_t tmp32 = *reg_rx; - tu_unaligned_write32(ff_buf, tmp32); - ff_buf += 4; +static void ff_push_fixed_addr(uint8_t *ff_buf, const volatile fixed_access_item_t *reg_rx, uint16_t len) { + // Reading full available 16/32-bit data from const app address + uint16_t n_items = len / sizeof(fixed_access_item_t); + while (n_items--) { + const fixed_access_item_t tmp = *reg_rx; + fixed_unaligned_write(ff_buf, tmp); + ff_buf += sizeof(fixed_access_item_t); } - // Read the remaining 1-3 bytes from const app address - const uint8_t bytes_rem = len & 0x03; + // Read the remaining 1 byte (16bit) or 1-3 bytes (32bit) from const app address + const uint8_t bytes_rem = len & FIXED_ACCESS_REMAINDER_MASK; if (bytes_rem) { - const uint32_t tmp32 = *reg_rx; - memcpy(ff_buf, &tmp32, bytes_rem); + const fixed_access_item_t tmp = *reg_rx; + memcpy(ff_buf, &tmp, bytes_rem); } } // Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode -static void ff_pull_fixed_addr_rw32(volatile uint32_t *reg_tx, const uint8_t *ff_buf, uint16_t len) { +static void ff_pull_fixed_addr(volatile fixed_access_item_t *reg_tx, const uint8_t *ff_buf, uint16_t len) { // Write full available 32 bit words to const address - uint16_t full_words = len >> 2u; - while (full_words--) { - *reg_tx = tu_unaligned_read32(ff_buf); - ff_buf += 4u; + uint16_t n_itmes = len / sizeof(fixed_access_item_t); + while (n_itmes--) { + *reg_tx = fixed_unaligned_read(ff_buf); + ff_buf += sizeof(fixed_access_item_t); } - // Write the remaining 1-3 bytes - const uint8_t bytes_rem = len & 0x03; + // Write the remaining 1 byte (16bit) or 1-3 bytes (32bit) + const uint8_t bytes_rem = len & FIXED_ACCESS_REMAINDER_MASK; if (bytes_rem) { - uint32_t tmp32 = 0u; - memcpy(&tmp32, ff_buf, bytes_rem); - *reg_tx = tmp32; + fixed_access_item_t tmp = 0u; + memcpy(&tmp, ff_buf, bytes_rem); + *reg_tx = tmp; } } #endif @@ -176,26 +190,26 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 } break; -#ifdef CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_RW32 +#if CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH case TU_FIFO_FIXED_ADDR_RW32: { - const volatile uint32_t *reg_rx = (volatile const uint32_t *)app_buf; + const volatile fixed_access_item_t *reg_rx = (volatile const fixed_access_item_t *)app_buf; if (n <= lin_count) { // Linear only - ff_push_fixed_addr_rw32(ff_buf, reg_rx, n * f->item_size); + ff_push_fixed_addr(ff_buf, reg_rx, n * f->item_size); } else { // Wrap around // Write full words to linear part of buffer - uint16_t lin_4n_bytes = lin_bytes & 0xFFFC; - ff_push_fixed_addr_rw32(ff_buf, reg_rx, lin_4n_bytes); - ff_buf += lin_4n_bytes; + uint16_t lin_nitems_bytes = lin_bytes & ~FIXED_ACCESS_REMAINDER_MASK; + ff_push_fixed_addr(ff_buf, reg_rx, lin_nitems_bytes); + ff_buf += lin_nitems_bytes; - // There could be odd 1-3 bytes before the wrap-around boundary - const uint8_t rem = lin_bytes & 0x03; + // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary + const uint8_t rem = lin_bytes & FIXED_ACCESS_REMAINDER_MASK; if (rem > 0) { - const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, 4 - rem); - const uint32_t tmp32 = *reg_rx; - tu_scatter_write32(tmp32, ff_buf, rem, f->buffer, remrem); + const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(fixed_access_item_t) - rem); + const fixed_access_item_t tmp = *reg_rx; + tu_scatter_write32(tmp, ff_buf, rem, f->buffer, remrem); wrap_bytes -= remrem; ff_buf = f->buffer + remrem; // wrap around @@ -205,7 +219,7 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 // Write data wrapped part if (wrap_bytes > 0) { - ff_push_fixed_addr_rw32(ff_buf, reg_rx, wrap_bytes); + ff_push_fixed_addr(ff_buf, reg_rx, wrap_bytes); } } break; @@ -240,28 +254,28 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd } break; -#ifdef CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_RW32 +#ifdef CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH case TU_FIFO_FIXED_ADDR_RW32: { - volatile uint32_t *reg_tx = (volatile uint32_t *)app_buf; + volatile fixed_access_item_t *reg_tx = (volatile fixed_access_item_t *)app_buf; if (n <= lin_count) { // Linear only - ff_pull_fixed_addr_rw32(reg_tx, ff_buf, n * f->item_size); + ff_pull_fixed_addr(reg_tx, ff_buf, n * f->item_size); } else { // Wrap around case // Read full words from linear part - uint16_t lin_4n_bytes = lin_bytes & 0xFFFC; - ff_pull_fixed_addr_rw32(reg_tx, ff_buf, lin_4n_bytes); - ff_buf += lin_4n_bytes; + uint16_t lin_nitems_bytes = lin_bytes & ~FIXED_ACCESS_REMAINDER_MASK; + ff_pull_fixed_addr(reg_tx, ff_buf, lin_nitems_bytes); + ff_buf += lin_nitems_bytes; - // There could be odd 1-3 bytes before the wrap-around boundary - const uint8_t rem = lin_bytes & 0x03; + // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary + const uint8_t rem = lin_bytes & FIXED_ACCESS_REMAINDER_MASK; if (rem > 0) { - const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, 4 - rem); - const uint32_t scatter32 = tu_scatter_read32(ff_buf, rem, f->buffer, remrem); + const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(fixed_access_item_t) - rem); + const fixed_access_item_t scatter = (fixed_access_item_t)tu_scatter_read32(ff_buf, rem, f->buffer, remrem); - *reg_tx = scatter32; + *reg_tx = scatter; wrap_bytes -= remrem; ff_buf = f->buffer + remrem; // wrap around @@ -271,7 +285,7 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd // Read data wrapped part if (wrap_bytes > 0) { - ff_pull_fixed_addr_rw32(reg_tx, ff_buf, wrap_bytes); + ff_pull_fixed_addr(reg_tx, ff_buf, wrap_bytes); } } break; diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 2e2a0db6f..f58cc3fcb 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -49,9 +49,16 @@ extern "C" { #define CFG_FIFO_MUTEX OSAL_MUTEX_REQUIRED #if CFG_TUD_EDPT_DEDICATED_HWFIFO || CFG_TUH_EDPT_DEDICATED_HWFIFO - #define CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_RW32 + #ifndef CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH + #define CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH 32 + #endif #endif +#ifndef CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH + #define CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH 0 +#endif + + /* Write/Read "pointer" is in the range of: 0 .. depth - 1, and is used to get the fifo data. * Write/Read "index" is always in the range of: 0 .. 2*depth-1 * @@ -150,7 +157,7 @@ typedef struct { // copy data to and from USB hardware FIFOs as needed for e.g. STM32s and others typedef enum { TU_FIFO_INC_ADDR_RW8, // increased address read/write by bytes - normal (default) mode - TU_FIFO_FIXED_ADDR_RW32, // fixed address read/write by 4 bytes (word). Used for STM32 access into USB hardware FIFO + TU_FIFO_FIXED_ADDR_RW32, // fixed address read/write by 2/4 bytes (items). } tu_fifo_access_mode_t; //--------------------------------------------------------------------+ @@ -205,6 +212,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_n(tu_fifo_t *f, void * return tu_fifo_read_n_access_mode(f, buffer, n, TU_FIFO_INC_ADDR_RW8); } +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_n_fixed_addr(tu_fifo_t *f, void *buffer, uint16_t n) { + return tu_fifo_read_n_access_mode(f, buffer, n, TU_FIFO_FIXED_ADDR_RW32); +} + // discard first n items from fifo i.e advance read pointer by n with mutex // return number of discarded items uint16_t tu_fifo_discard_n(tu_fifo_t *f, uint16_t n); @@ -218,6 +229,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const return tu_fifo_write_n_access_mode(f, data, n, TU_FIFO_INC_ADDR_RW8); } +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n_fixed_addr(tu_fifo_t *f, const void *data, uint16_t n) { + return tu_fifo_write_n_access_mode(f, data, n, TU_FIFO_FIXED_ADDR_RW32); +} + //--------------------------------------------------------------------+ // Internal Helper Local // work on local copies of read/write indices in order to only access them once for re-entrancy diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 174136e38..aa6111a16 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -171,7 +171,7 @@ typedef osal_queue_def_t* osal_queue_t; } TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { - (void) tu_fifo_clear(&qdef->ff); + tu_fifo_clear(&qdef->ff); return (osal_queue_t) qdef; } diff --git a/test/unit-test/CMakeLists.txt b/test/unit-test/CMakeLists.txt index 7172f5575..3339361db 100644 --- a/test/unit-test/CMakeLists.txt +++ b/test/unit-test/CMakeLists.txt @@ -113,7 +113,7 @@ add_ceedling_test( ${CEEDLING_WORKDIR}/../../src/common/tusb_fifo.c "" ) -target_compile_definitions(test_fifo PRIVATE CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_RW32=1) +target_compile_definitions(test_fifo PRIVATE CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH=32) add_ceedling_test( test_usbd diff --git a/test/unit-test/project.yml b/test/unit-test/project.yml index d971d098d..3968faaef 100644 --- a/test/unit-test/project.yml +++ b/test/unit-test/project.yml @@ -128,7 +128,7 @@ :defines: :test: - _UNITY_TEST_ - - CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_RW32 + - CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH=32 :release: [] # Enable to inject name of a test as a unique compilation symbol into its respective executable build. -- cgit v1.3.1 From ba3319d90d546143d169b398166b457082ad21d4 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Mon, 8 Dec 2025 13:59:21 +0800 Subject: support hpmicro chips Signed-off-by: Zhihong Chen --- hw/bsp/hpmicro/boards/hpm6750evk2/board.c | 295 +++++++++ hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake | 22 + hw/bsp/hpmicro/boards/hpm6750evk2/board.h | 105 ++++ hw/bsp/hpmicro/boards/hpm6750evk2/board.mk | 16 + hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c | 862 ++++++++++++++++++++++++++ hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h | 89 +++ hw/bsp/hpmicro/family.c | 115 ++++ hw/bsp/hpmicro/family.cmake | 131 ++++ hw/bsp/hpmicro/family.mk | 76 +++ src/common/tusb_mcu.h | 12 + src/portable/chipidea/ci_hs/ci_hs_hpm.h | 54 ++ src/portable/chipidea/ci_hs/dcd_ci_hs.c | 14 +- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 8 + src/portable/ehci/ehci.c | 12 + src/tusb_option.h | 3 + tools/get_deps.py | 3 + 16 files changed, 1816 insertions(+), 1 deletion(-) create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/board.c create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/board.h create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/board.mk create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h create mode 100644 hw/bsp/hpmicro/family.c create mode 100644 hw/bsp/hpmicro/family.cmake create mode 100644 hw/bsp/hpmicro/family.mk create mode 100644 src/portable/chipidea/ci_hs/ci_hs_hpm.h diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/board.c b/hw/bsp/hpmicro/boards/hpm6750evk2/board.c new file mode 100644 index 000000000..c281356e3 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/board.c @@ -0,0 +1,295 @@ +/* + * Copyright (c) 2025 HPMicro + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#include "board.h" +#include "pinmux.h" +#include "hpm_pmp_drv.h" +#include "hpm_pllctl_drv.h" +#include "hpm_clock_drv.h" +#include "hpm_sysctl_drv.h" +#include "hpm_pcfg_drv.h" +#include "hpm_uart_drv.h" +#include "hpm_gpio_drv.h" + +/** + * @brief FLASH configuration option definitions: + * option[0]: + * [31:16] 0xfcf9 - FLASH configuration option tag + * [15:4] 0 - Reserved + * [3:0] option words (exclude option[0]) + * option[1]: + * [31:28] Flash probe type + * 0 - SFDP SDR / 1 - SFDP DDR + * 2 - 1-4-4 Read (0xEB, 24-bit address) / 3 - 1-2-2 Read(0xBB, 24-bit address) + * 4 - HyperFLASH 1.8V / 5 - HyperFLASH 3V + * 6 - OctaBus DDR (SPI -> OPI DDR) + * 8 - Xccela DDR (SPI -> OPI DDR) + * 10 - EcoXiP DDR (SPI -> OPI DDR) + * [27:24] Command Pads after Power-on Reset + * 0 - SPI / 1 - DPI / 2 - QPI / 3 - OPI + * [23:20] Command Pads after Configuring FLASH + * 0 - SPI / 1 - DPI / 2 - QPI / 3 - OPI + * [19:16] Quad Enable Sequence (for the device support SFDP 1.0 only) + * 0 - Not needed + * 1 - QE bit is at bit 6 in Status Register 1 + * 2 - QE bit is at bit1 in Status Register 2 + * 3 - QE bit is at bit7 in Status Register 2 + * 4 - QE bit is at bit1 in Status Register 2 and should be programmed by 0x31 + * [15:8] Dummy cycles + * 0 - Auto-probed / detected / default value + * Others - User specified value, for DDR read, the dummy cycles should be 2 * cycles on FLASH datasheet + * [7:4] Misc. + * 0 - Not used + * 1 - SPI mode + * 2 - Internal loopback + * 3 - External DQS + * [3:0] Frequency option + * 1 - 30MHz / 2 - 50MHz / 3 - 66MHz / 4 - 80MHz / 5 - 100MHz / 6 - 120MHz / 7 - 133MHz / 8 - 166MHz + * + * option[2] (Effective only if the bit[3:0] in option[0] > 1) + * [31:20] Reserved + * [19:16] IO voltage + * 0 - 3V / 1 - 1.8V + * [15:12] Pin group + * 0 - 1st group / 1 - 2nd group + * [11:8] Connection selection + * 0 - CA_CS0 / 1 - CB_CS0 / 2 - CA_CS0 + CB_CS0 (Two FLASH connected to CA and CB respectively) + * [7:0] Drive Strength + * 0 - Default value + * option[3] (Effective only if the bit[3:0] in option[0] > 2, required only for the QSPI NOR FLASH that not supports + * JESD216) + * [31:16] reserved + * [15:12] Sector Erase Command Option, not required here + * [11:8] Sector Size Option, not required here + * [7:0] Flash Size Option + * 0 - 4MB / 1 - 8MB / 2 - 16MB + */ +#if defined(FLASH_XIP) && FLASH_XIP +__attribute__ ((section(".nor_cfg_option"), used)) const uint32_t option[4] = {0xfcf90002, 0x00000007, 0xE, 0x0}; +#endif + +#if defined(FLASH_UF2) && FLASH_UF2 +ATTR_PLACE_AT(".uf2_signature") __attribute__((used)) const uint32_t uf2_signature = BOARD_UF2_SIGNATURE; +#endif + + +/* static function declarations */ +static void board_turnoff_rgb_led(void); +static void init_uart_pins(UART_Type *ptr); +static uint32_t board_init_uart_clock(UART_Type *ptr); +static void init_gpio_pins(void); +static void init_usb_pins(USB_Type *ptr); + +/* extern function definitions */ +void board_init_clock(void) +{ + uint32_t cpu0_freq = clock_get_frequency(clock_cpu0); + if (cpu0_freq == PLLCTL_SOC_PLL_REFCLK_FREQ) { + /* Configure the External OSC ramp-up time: ~9ms */ + pllctl_xtal_set_rampup_time(HPM_PLLCTL, 32UL * 1000UL * 9U); + + /* Select clock setting preset1 */ + sysctl_clock_set_preset(HPM_SYSCTL, sysctl_preset_1); + } + + /* Add clocks to group 0 */ + clock_add_to_group(clock_cpu0, 0); + clock_add_to_group(clock_mchtmr0, 0); + clock_add_to_group(clock_axi0, 0); + clock_add_to_group(clock_axi1, 0); + clock_add_to_group(clock_axi2, 0); + clock_add_to_group(clock_ahb, 0); + clock_add_to_group(clock_xdma, 0); + clock_add_to_group(clock_hdma, 0); + clock_add_to_group(clock_xpi0, 0); + clock_add_to_group(clock_xpi1, 0); + clock_add_to_group(clock_ram0, 0); + clock_add_to_group(clock_ram1, 0); + clock_add_to_group(clock_lmm0, 0); + clock_add_to_group(clock_lmm1, 0); + clock_add_to_group(clock_gpio, 0); + clock_add_to_group(clock_mot0, 0); + clock_add_to_group(clock_mot1, 0); + clock_add_to_group(clock_mot2, 0); + clock_add_to_group(clock_mot3, 0); + clock_add_to_group(clock_synt, 0); + clock_add_to_group(clock_ptpc, 0); + /* Connect Group0 to CPU0 */ + clock_connect_group_to_cpu(0, 0); + + /* Add clocks to Group1 */ + clock_add_to_group(clock_cpu1, 1); + clock_add_to_group(clock_mchtmr1, 1); + /* Connect Group1 to CPU1 */ + clock_connect_group_to_cpu(1, 1); + + /* Bump up DCDC voltage to 1275mv */ + pcfg_dcdc_set_voltage(HPM_PCFG, 1275); + pcfg_dcdc_switch_to_dcm_mode(HPM_PCFG); + + if (status_success != pllctl_init_int_pll_with_freq(HPM_PLLCTL, 0, BOARD_CPU_FREQ)) { + printf("Failed to set pll0_clk0 to %ldHz\n", BOARD_CPU_FREQ); + while (1) { + } + } + + clock_set_source_divider(clock_cpu0, clk_src_pll0_clk0, 1); + clock_set_source_divider(clock_cpu1, clk_src_pll0_clk0, 1); + clock_update_core_clock(); + + clock_set_source_divider(clock_ahb, clk_src_pll1_clk1, 2); /*200m hz*/ + clock_set_source_divider(clock_mchtmr0, clk_src_osc24m, 1); + clock_set_source_divider(clock_mchtmr1, clk_src_osc24m, 1); +} + +void board_init_pmp(void) +{ + uint32_t start_addr; + uint32_t end_addr; + uint32_t length; + pmp_entry_t pmp_entry[16] = {0}; + uint8_t index = 0; + + /* Init noncachable memory */ + extern uint32_t __noncacheable_start__[]; + extern uint32_t __noncacheable_end__[]; + start_addr = (uint32_t) __noncacheable_start__; + end_addr = (uint32_t) __noncacheable_end__; + length = end_addr - start_addr; + if (length > 0) { + /* Ensure the address and the length are power of 2 aligned */ + assert((length & (length - 1U)) == 0U); + assert((start_addr & (length - 1U)) == 0U); + pmp_entry[index].pmp_addr = PMP_NAPOT_ADDR(start_addr, length); + pmp_entry[index].pmp_cfg.val = PMP_CFG(READ_EN, WRITE_EN, EXECUTE_EN, ADDR_MATCH_NAPOT, REG_UNLOCK); + pmp_entry[index].pma_addr = PMA_NAPOT_ADDR(start_addr, length); + pmp_entry[index].pma_cfg.val = PMA_CFG(ADDR_MATCH_NAPOT, MEM_TYPE_MEM_NON_CACHE_BUF, AMO_EN); + index++; + } + + /* Init share memory */ + extern uint32_t __share_mem_start__[]; + extern uint32_t __share_mem_end__[]; + start_addr = (uint32_t)__share_mem_start__; + end_addr = (uint32_t)__share_mem_end__; + length = end_addr - start_addr; + if (length > 0) { + /* Ensure the address and the length are power of 2 aligned */ + assert((length & (length - 1U)) == 0U); + assert((start_addr & (length - 1U)) == 0U); + pmp_entry[index].pmp_addr = PMP_NAPOT_ADDR(start_addr, length); + pmp_entry[index].pmp_cfg.val = PMP_CFG(READ_EN, WRITE_EN, EXECUTE_EN, ADDR_MATCH_NAPOT, REG_UNLOCK); + pmp_entry[index].pma_addr = PMA_NAPOT_ADDR(start_addr, length); + pmp_entry[index].pma_cfg.val = PMA_CFG(ADDR_MATCH_NAPOT, MEM_TYPE_MEM_NON_CACHE_BUF, AMO_EN); + index++; + } + + pmp_config(&pmp_entry[0], index); +} + +void board_init_console(void) +{ + uart_config_t config = {0}; + uint32_t freq; + + /* uart needs to configure pin function before enabling clock, otherwise the level change of + uart rx pin when configuring pin function will cause a wrong data to be received. + And a uart rx dma request will be generated by default uart fifo dma trigger level. */ + init_uart_pins((UART_Type *) BOARD_CONSOLE_UART_BASE); + + freq = board_init_uart_clock((UART_Type *)BOARD_CONSOLE_UART_BASE); + + uart_default_config((UART_Type *)BOARD_CONSOLE_UART_BASE, &config); + config.src_freq_in_hz = freq; + config.baudrate = BOARD_CONSOLE_UART_BAUDRATE; + uart_init((UART_Type *)BOARD_CONSOLE_UART_BASE, &config); +} + +void board_init_gpio_pins(void) +{ + init_gpio_pins(); +} + +void board_init_led_pins(void) +{ + board_turnoff_rgb_led(); + init_led_pins_as_gpio(); + gpio_set_pin_output_with_initial(BOARD_R_GPIO_CTRL, BOARD_R_GPIO_INDEX, BOARD_R_GPIO_PIN, BOARD_LED_OFF_LEVEL); + gpio_set_pin_output_with_initial(BOARD_G_GPIO_CTRL, BOARD_G_GPIO_INDEX, BOARD_G_GPIO_PIN, BOARD_LED_OFF_LEVEL); + gpio_set_pin_output_with_initial(BOARD_B_GPIO_CTRL, BOARD_B_GPIO_INDEX, BOARD_B_GPIO_PIN, BOARD_LED_OFF_LEVEL); +} + +void board_init_usb(USB_Type *ptr) +{ + clock_name_t usb_clk = (ptr == HPM_USB0) ? clock_usb0 : clock_usb1; + + init_usb_pins(ptr); + clock_add_to_group(usb_clk, 0); +} + +/* static function definitions */ +static void board_turnoff_rgb_led(void) +{ + uint32_t pad_ctl = IOC_PAD_PAD_CTL_PE_SET(1) | IOC_PAD_PAD_CTL_PS_SET(BOARD_LED_OFF_LEVEL); + HPM_IOC->PAD[IOC_PAD_PB11].FUNC_CTL = IOC_PB11_FUNC_CTL_GPIO_B_11; + HPM_IOC->PAD[IOC_PAD_PB12].FUNC_CTL = IOC_PB12_FUNC_CTL_GPIO_B_12; + HPM_IOC->PAD[IOC_PAD_PB13].FUNC_CTL = IOC_PB13_FUNC_CTL_GPIO_B_13; + + HPM_IOC->PAD[IOC_PAD_PB11].PAD_CTL = pad_ctl; + HPM_IOC->PAD[IOC_PAD_PB12].PAD_CTL = pad_ctl; + HPM_IOC->PAD[IOC_PAD_PB13].PAD_CTL = pad_ctl; +} + +static void init_uart_pins(UART_Type *ptr) +{ + if (ptr == HPM_UART0) { + init_uart0_pins(); + } else if (ptr == HPM_UART2) { + init_uart2_pins(); + } else if (ptr == HPM_UART13) { + init_uart13_pins(); + } else if (ptr == HPM_PUART) { + init_puart_pins(); + } +} + +static uint32_t board_init_uart_clock(UART_Type *ptr) +{ + uint32_t freq = 0U; + if (ptr == HPM_UART0) { + clock_add_to_group(clock_uart0, 0); + freq = clock_get_frequency(clock_uart0); + } else if (ptr == HPM_UART6) { + clock_add_to_group(clock_uart6, 0); + freq = clock_get_frequency(clock_uart6); + } else if (ptr == HPM_UART13) { + clock_add_to_group(clock_uart13, 0); + freq = clock_get_frequency(clock_uart13); + } else if (ptr == HPM_UART14) { + clock_add_to_group(clock_uart14, 0); + freq = clock_get_frequency(clock_uart14); + } else { + /* Not supported */ + } + return freq; +} + +static void init_gpio_pins(void) +{ + init_gpio_pins_with_pull_up(); +#ifdef USING_GPIO0_FOR_GPIOZ + init_gpio_pins_using_gpio0(); +#endif +} + +static void init_usb_pins(USB_Type *ptr) +{ + if (ptr == HPM_USB0) { + init_usb0_pins(); + } else if (ptr == HPM_USB1) { + init_usb1_pins(); + } +} diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake b/hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake new file mode 100644 index 000000000..b15911cb5 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake @@ -0,0 +1,22 @@ +set(MCU_VARIANT HPM6750xVMx) +set(JLINK_DEVICE ${MCU_VARIANT}) + +set(JLINK_IF jtag) + +set(HPM_SOC ${SDK_DIR}/soc/HPM6700/HPM6750) +set(HPM_IP_REGS ${SDK_DIR}/soc/HPM6700/ip) + +set(BOARD_FLASH_SIZE 16M) +set(BOARD_STACK_SIZE 16K) +set(BOARD_HEAP_SIZE 16K) + +set(HPM_PLLCTL_DRV_FILE hpm_pllctl_drv.c) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + BOARD_TUD_RHPORT=0 + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + BOARD_TUH_RHPORT=1 + BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) +endfunction() diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/board.h b/hw/bsp/hpmicro/boards/hpm6750evk2/board.h new file mode 100644 index 000000000..0636a4722 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/board.h @@ -0,0 +1,105 @@ +/* + * Copyright (c) 2021-2025 HPMicro + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef _HPM_BOARD_H +#define _HPM_BOARD_H + +#include +#include "hpm_common.h" +#include "hpm_soc.h" +#include "hpm_soc_feature.h" +#include "pinmux.h" + +#define BOARD_NAME "hpm6750evk2" + +#ifndef BOARD_RUNNING_CORE +#define BOARD_RUNNING_CORE HPM_CORE0 +#endif + +#define BOARD_CPU_FREQ (816000000UL) + +/* console section */ +#if BOARD_RUNNING_CORE == HPM_CORE0 + #define BOARD_CONSOLE_UART_BASE HPM_UART0 + #define BOARD_CONSOLE_UART_CLK_NAME clock_uart0 + #define BOARD_CONSOLE_UART_IRQ IRQn_UART0 + #define BOARD_CONSOLE_UART_TX_DMA_REQ HPM_DMA_SRC_UART0_TX + #define BOARD_CONSOLE_UART_RX_DMA_REQ HPM_DMA_SRC_UART0_RX +#else + #define BOARD_CONSOLE_UART_BASE HPM_UART13 + #define BOARD_CONSOLE_UART_CLK_NAME clock_uart13 + #define BOARD_CONSOLE_UART_IRQ IRQn_UART13 + #define BOARD_CONSOLE_UART_TX_DMA_REQ HPM_DMA_SRC_UART13_TX + #define BOARD_CONSOLE_UART_RX_DMA_REQ HPM_DMA_SRC_UART13_RX +#endif + +#define BOARD_CONSOLE_UART_BAUDRATE (115200UL) + +/* sdram section */ +#define BOARD_SDRAM_ADDRESS (0x40000000UL) +#define BOARD_SDRAM_SIZE (32 * SIZE_1MB) +#define BOARD_SDRAM_CS FEMC_SDRAM_CS0 +#define BOARD_SDRAM_PORT_SIZE FEMC_SDRAM_PORT_SIZE_32_BITS +#define BOARD_SDRAM_COLUMN_ADDR_BITS FEMC_SDRAM_COLUMN_ADDR_9_BITS +#define BOARD_SDRAM_REFRESH_COUNT (8192UL) +#define BOARD_SDRAM_REFRESH_IN_MS (64UL) + +#define BOARD_FLASH_BASE_ADDRESS (0x80000000UL) +#define BOARD_FLASH_SIZE (16 << 20) + +/* gpio section */ +#define BOARD_R_GPIO_CTRL HPM_GPIO0 +#define BOARD_R_GPIO_INDEX GPIO_DI_GPIOB +#define BOARD_R_GPIO_PIN 11 +#define BOARD_G_GPIO_CTRL HPM_GPIO0 +#define BOARD_G_GPIO_INDEX GPIO_DI_GPIOB +#define BOARD_G_GPIO_PIN 12 +#define BOARD_B_GPIO_CTRL HPM_GPIO0 +#define BOARD_B_GPIO_INDEX GPIO_DI_GPIOB +#define BOARD_B_GPIO_PIN 13 + +#define BOARD_LED_GPIO_CTRL HPM_GPIO0 + +#define BOARD_LED_GPIO_INDEX GPIO_DI_GPIOB +#define BOARD_LED_GPIO_PIN 12 +#define BOARD_LED_OFF_LEVEL 0 +#define BOARD_LED_ON_LEVEL 1 + +#define BOARD_LED_TOGGLE_RGB 1 + +#define BOARD_APP_GPIO_INDEX GPIO_DI_GPIOZ +#define BOARD_APP_GPIO_PIN 2 +#define BOARD_BUTTON_PRESSED_VALUE 0 + +#define USING_GPIO0_FOR_GPIOZ +#ifndef USING_GPIO0_FOR_GPIOZ +#define BOARD_APP_GPIO_CTRL HPM_BGPIO +#define BOARD_APP_GPIO_IRQ IRQn_BGPIO +#else +#define BOARD_APP_GPIO_CTRL HPM_GPIO0 +#define BOARD_APP_GPIO_IRQ IRQn_GPIO0_Z +#endif + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + + +void board_init_clock(void); +void board_init_pmp(void); +void board_init_console(void); +void board_init_gpio_pins(void); +void board_init_led_pins(void); +void board_init_usb(USB_Type *ptr); +void board_print_banner(void); +void board_print_clock_freq(void); + + +#if defined(__cplusplus) +} +#endif /* __cplusplus */ +#endif /* _HPM_BOARD_H */ diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/board.mk b/hw/bsp/hpmicro/boards/hpm6750evk2/board.mk new file mode 100644 index 000000000..26981ce28 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/board.mk @@ -0,0 +1,16 @@ +MCU_VARIANT = HPM6750xVMx +JLINK_DEVICE = ${MCU_VARIANT} + +JLINK_IF = jtag + +HPM_SOC = $(SDK_DIR)/soc/HPM6700/HPM6750 +HPM_IP_REGS = $(SDK_DIR)/soc/HPM6700/ip + +BOARD_FLASH_SIZE = 16M +BOARD_STACK_SIZE = 16K +BOARD_HEAP_SIZE = 16K + +BOARD_TUD_RHPORT = 0 +BOARD_TUH_RHPORT = 1 + +HPM_PLLCTL_DRV_FILE = hpm_pllctl_drv.c diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c b/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c new file mode 100644 index 000000000..7554e3a76 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c @@ -0,0 +1,862 @@ + +/* + * Copyright (c) 2025 HPMicro + * + * SPDX-License-Identifier: BSD-3-Clause + * + * + * Automatically generated by HPM Pinmux Tool + * + * + * Note: + * PY and PZ IOs: if any SOC pin function needs to be routed to these IOs, + * besides of IOC, PIOC/BIOC needs to be configured SOC_GPIO_X_xx, so that + * expected SoC function can be enabled on these IOs. + */ + +#include "pinmux.h" +#include "board.h" +#include "hpm_trgm_drv.h" + + +/* PY port IO needs to configure PIOC as well */ +void init_uart0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PY07].FUNC_CTL = IOC_PY07_FUNC_CTL_UART0_RXD; + HPM_PIOC->PAD[IOC_PAD_PY07].FUNC_CTL = PIOC_PY07_FUNC_CTL_SOC_PY_07; + + HPM_IOC->PAD[IOC_PAD_PY06].FUNC_CTL = IOC_PY06_FUNC_CTL_UART0_TXD; + HPM_PIOC->PAD[IOC_PAD_PY06].FUNC_CTL = PIOC_PY06_FUNC_CTL_SOC_PY_06; +} + +void init_uart2_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE16].FUNC_CTL = IOC_PE16_FUNC_CTL_UART2_TXD; + + HPM_IOC->PAD[IOC_PAD_PE21].FUNC_CTL = IOC_PE21_FUNC_CTL_UART2_RXD; +} + +/* PZ port IO needs to configure BIOC as well */ +void init_uart13_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ08].FUNC_CTL = IOC_PZ08_FUNC_CTL_UART13_RXD; + HPM_BIOC->PAD[IOC_PAD_PZ08].FUNC_CTL = BIOC_PZ08_FUNC_CTL_SOC_PZ_08; + + HPM_IOC->PAD[IOC_PAD_PZ09].FUNC_CTL = IOC_PZ09_FUNC_CTL_UART13_TXD; + HPM_BIOC->PAD[IOC_PAD_PZ09].FUNC_CTL = BIOC_PZ09_FUNC_CTL_SOC_PZ_09; +} + +void init_puart_pins(void) +{ + HPM_PIOC->PAD[IOC_PAD_PY06].FUNC_CTL = PIOC_PY06_FUNC_CTL_PUART_TXD; + + HPM_PIOC->PAD[IOC_PAD_PY07].FUNC_CTL = PIOC_PY07_FUNC_CTL_PUART_RXD; +} + +/* + * PZ port IO needs to configure BIOC as well. + * PZ08 and PZ09 need pull up. + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_uart13_pins_as_gpio(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ08].FUNC_CTL = IOC_PZ08_FUNC_CTL_GPIO_Z_08; + HPM_BIOC->PAD[IOC_PAD_PZ08].FUNC_CTL = BIOC_PZ08_FUNC_CTL_SOC_PZ_08; + HPM_IOC->PAD[IOC_PAD_PZ08].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); + + HPM_IOC->PAD[IOC_PAD_PZ09].FUNC_CTL = IOC_PZ09_FUNC_CTL_GPIO_Z_09; + HPM_BIOC->PAD[IOC_PAD_PZ09].FUNC_CTL = BIOC_PZ09_FUNC_CTL_SOC_PZ_09; +} + +void init_lcd0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PB03].FUNC_CTL = IOC_PB03_FUNC_CTL_DIS0_R_0; + + HPM_IOC->PAD[IOC_PAD_PB04].FUNC_CTL = IOC_PB04_FUNC_CTL_DIS0_R_1; + + HPM_IOC->PAD[IOC_PAD_PB00].FUNC_CTL = IOC_PB00_FUNC_CTL_DIS0_R_2; + + HPM_IOC->PAD[IOC_PAD_PA31].FUNC_CTL = IOC_PA31_FUNC_CTL_DIS0_R_3; + + HPM_IOC->PAD[IOC_PAD_PA26].FUNC_CTL = IOC_PA26_FUNC_CTL_DIS0_R_4; + + HPM_IOC->PAD[IOC_PAD_PA21].FUNC_CTL = IOC_PA21_FUNC_CTL_DIS0_R_5; + + HPM_IOC->PAD[IOC_PAD_PA27].FUNC_CTL = IOC_PA27_FUNC_CTL_DIS0_R_6; + + HPM_IOC->PAD[IOC_PAD_PA28].FUNC_CTL = IOC_PA28_FUNC_CTL_DIS0_R_7; + + HPM_IOC->PAD[IOC_PAD_PB06].FUNC_CTL = IOC_PB06_FUNC_CTL_DIS0_G_0; + + HPM_IOC->PAD[IOC_PAD_PB01].FUNC_CTL = IOC_PB01_FUNC_CTL_DIS0_G_1; + + HPM_IOC->PAD[IOC_PAD_PA22].FUNC_CTL = IOC_PA22_FUNC_CTL_DIS0_G_2; + + HPM_IOC->PAD[IOC_PAD_PA23].FUNC_CTL = IOC_PA23_FUNC_CTL_DIS0_G_3; + + HPM_IOC->PAD[IOC_PAD_PA29].FUNC_CTL = IOC_PA29_FUNC_CTL_DIS0_G_4; + + HPM_IOC->PAD[IOC_PAD_PA24].FUNC_CTL = IOC_PA24_FUNC_CTL_DIS0_G_5; + + HPM_IOC->PAD[IOC_PAD_PA30].FUNC_CTL = IOC_PA30_FUNC_CTL_DIS0_G_6; + + HPM_IOC->PAD[IOC_PAD_PA25].FUNC_CTL = IOC_PA25_FUNC_CTL_DIS0_G_7; + + HPM_IOC->PAD[IOC_PAD_PB05].FUNC_CTL = IOC_PB05_FUNC_CTL_DIS0_B_0; + + HPM_IOC->PAD[IOC_PAD_PB07].FUNC_CTL = IOC_PB07_FUNC_CTL_DIS0_B_1; + + HPM_IOC->PAD[IOC_PAD_PB02].FUNC_CTL = IOC_PB02_FUNC_CTL_DIS0_B_2; + + HPM_IOC->PAD[IOC_PAD_PA16].FUNC_CTL = IOC_PA16_FUNC_CTL_DIS0_B_3; + + HPM_IOC->PAD[IOC_PAD_PA12].FUNC_CTL = IOC_PA12_FUNC_CTL_DIS0_B_4; + + HPM_IOC->PAD[IOC_PAD_PA17].FUNC_CTL = IOC_PA17_FUNC_CTL_DIS0_B_5; + + HPM_IOC->PAD[IOC_PAD_PA13].FUNC_CTL = IOC_PA13_FUNC_CTL_DIS0_B_6; + + HPM_IOC->PAD[IOC_PAD_PA18].FUNC_CTL = IOC_PA18_FUNC_CTL_DIS0_B_7; + + HPM_IOC->PAD[IOC_PAD_PA20].FUNC_CTL = IOC_PA20_FUNC_CTL_DIS0_CLK; + + HPM_IOC->PAD[IOC_PAD_PA15].FUNC_CTL = IOC_PA15_FUNC_CTL_DIS0_EN; + + HPM_IOC->PAD[IOC_PAD_PA19].FUNC_CTL = IOC_PA19_FUNC_CTL_DIS0_HSYNC; + + HPM_IOC->PAD[IOC_PAD_PA14].FUNC_CTL = IOC_PA14_FUNC_CTL_DIS0_VSYNC; + + /* PWM */ + HPM_IOC->PAD[IOC_PAD_PB10].FUNC_CTL = IOC_PB10_FUNC_CTL_GPIO_B_10; + + /* RST */ + HPM_IOC->PAD[IOC_PAD_PB16].FUNC_CTL = IOC_PB16_FUNC_CTL_GPIO_B_16; + + HPM_IOC->PAD[IOC_PAD_PZ00].FUNC_CTL = IOC_PZ00_FUNC_CTL_GPIO_Z_00; + HPM_BIOC->PAD[IOC_PAD_PZ00].FUNC_CTL = BIOC_PZ00_FUNC_CTL_SOC_PZ_00; + HPM_IOC->PAD[IOC_PAD_PZ00].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +/* + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_cap_pins(void) +{ + /* CAP_INT */ + HPM_IOC->PAD[IOC_PAD_PB08].FUNC_CTL = IOC_PB08_FUNC_CTL_GPIO_B_08; + HPM_IOC->PAD[IOC_PAD_PB08].PAD_CTL = IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(1); + + /* CAP_RST */ + HPM_IOC->PAD[IOC_PAD_PB09].FUNC_CTL = IOC_PB09_FUNC_CTL_GPIO_B_09; + HPM_IOC->PAD[IOC_PAD_PB09].PAD_CTL = IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(1); +} + +/* PZ port IO needs to configure BIOC as well */ +void init_i2c0_pins_as_gpio(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ11].FUNC_CTL = IOC_PZ11_FUNC_CTL_GPIO_Z_11; + HPM_BIOC->PAD[IOC_PAD_PZ11].FUNC_CTL = BIOC_PZ11_FUNC_CTL_SOC_PZ_11; + + HPM_IOC->PAD[IOC_PAD_PZ10].FUNC_CTL = IOC_PZ10_FUNC_CTL_GPIO_Z_10; + HPM_BIOC->PAD[IOC_PAD_PZ10].FUNC_CTL = BIOC_PZ10_FUNC_CTL_SOC_PZ_10; +} + +/* PZ port IO needs to configure BIOC as well */ +void init_i2c0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ11].FUNC_CTL = IOC_PZ11_FUNC_CTL_I2C0_SCL | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_BIOC->PAD[IOC_PAD_PZ11].FUNC_CTL = BIOC_PZ11_FUNC_CTL_SOC_PZ_11; + HPM_IOC->PAD[IOC_PAD_PZ11].PAD_CTL = IOC_PAD_PAD_CTL_OD_SET(1); + + HPM_IOC->PAD[IOC_PAD_PZ10].FUNC_CTL = IOC_PZ10_FUNC_CTL_I2C0_SDA | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_BIOC->PAD[IOC_PAD_PZ10].FUNC_CTL = BIOC_PZ10_FUNC_CTL_SOC_PZ_10; + HPM_IOC->PAD[IOC_PAD_PZ10].PAD_CTL = IOC_PAD_PAD_CTL_OD_SET(1); +} + +void init_femc_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PC01].FUNC_CTL = IOC_PC01_FUNC_CTL_FEMC_DQ_16; + + HPM_IOC->PAD[IOC_PAD_PC00].FUNC_CTL = IOC_PC00_FUNC_CTL_FEMC_DQ_17; + + HPM_IOC->PAD[IOC_PAD_PB31].FUNC_CTL = IOC_PB31_FUNC_CTL_FEMC_DQ_18; + + HPM_IOC->PAD[IOC_PAD_PB30].FUNC_CTL = IOC_PB30_FUNC_CTL_FEMC_DQ_30; + + HPM_IOC->PAD[IOC_PAD_PB29].FUNC_CTL = IOC_PB29_FUNC_CTL_FEMC_DQ_31; + + HPM_IOC->PAD[IOC_PAD_PB28].FUNC_CTL = IOC_PB28_FUNC_CTL_FEMC_DQ_19; + + HPM_IOC->PAD[IOC_PAD_PB27].FUNC_CTL = IOC_PB27_FUNC_CTL_FEMC_DQ_20; + + HPM_IOC->PAD[IOC_PAD_PB26].FUNC_CTL = IOC_PB26_FUNC_CTL_FEMC_DQ_21; + + HPM_IOC->PAD[IOC_PAD_PB25].FUNC_CTL = IOC_PB25_FUNC_CTL_FEMC_DQ_28; + + HPM_IOC->PAD[IOC_PAD_PB24].FUNC_CTL = IOC_PB24_FUNC_CTL_FEMC_DQ_29; + + HPM_IOC->PAD[IOC_PAD_PB23].FUNC_CTL = IOC_PB23_FUNC_CTL_FEMC_DQ_22; + + HPM_IOC->PAD[IOC_PAD_PB22].FUNC_CTL = IOC_PB22_FUNC_CTL_FEMC_DQ_26; + + HPM_IOC->PAD[IOC_PAD_PB21].FUNC_CTL = IOC_PB21_FUNC_CTL_FEMC_DQ_27; + + HPM_IOC->PAD[IOC_PAD_PB20].FUNC_CTL = IOC_PB20_FUNC_CTL_FEMC_DQ_23; + + HPM_IOC->PAD[IOC_PAD_PB19].FUNC_CTL = IOC_PB19_FUNC_CTL_FEMC_DQ_24; + + HPM_IOC->PAD[IOC_PAD_PB18].FUNC_CTL = IOC_PB18_FUNC_CTL_FEMC_DQ_25; + + HPM_IOC->PAD[IOC_PAD_PD13].FUNC_CTL = IOC_PD13_FUNC_CTL_FEMC_DQ_14; + + HPM_IOC->PAD[IOC_PAD_PD12].FUNC_CTL = IOC_PD12_FUNC_CTL_FEMC_DQ_15; + + HPM_IOC->PAD[IOC_PAD_PD10].FUNC_CTL = IOC_PD10_FUNC_CTL_FEMC_DQ_12; + + HPM_IOC->PAD[IOC_PAD_PD09].FUNC_CTL = IOC_PD09_FUNC_CTL_FEMC_DQ_13; + + HPM_IOC->PAD[IOC_PAD_PD08].FUNC_CTL = IOC_PD08_FUNC_CTL_FEMC_DQ_00; + + HPM_IOC->PAD[IOC_PAD_PD07].FUNC_CTL = IOC_PD07_FUNC_CTL_FEMC_DQ_10; + + HPM_IOC->PAD[IOC_PAD_PD06].FUNC_CTL = IOC_PD06_FUNC_CTL_FEMC_DQ_11; + + HPM_IOC->PAD[IOC_PAD_PD05].FUNC_CTL = IOC_PD05_FUNC_CTL_FEMC_DQ_01; + + HPM_IOC->PAD[IOC_PAD_PD04].FUNC_CTL = IOC_PD04_FUNC_CTL_FEMC_DQ_08; + + HPM_IOC->PAD[IOC_PAD_PD03].FUNC_CTL = IOC_PD03_FUNC_CTL_FEMC_DQ_09; + + HPM_IOC->PAD[IOC_PAD_PD02].FUNC_CTL = IOC_PD02_FUNC_CTL_FEMC_DQ_04; + + HPM_IOC->PAD[IOC_PAD_PD01].FUNC_CTL = IOC_PD01_FUNC_CTL_FEMC_DQ_03; + + HPM_IOC->PAD[IOC_PAD_PD00].FUNC_CTL = IOC_PD00_FUNC_CTL_FEMC_DQ_02; + + HPM_IOC->PAD[IOC_PAD_PC29].FUNC_CTL = IOC_PC29_FUNC_CTL_FEMC_DQ_07; + + HPM_IOC->PAD[IOC_PAD_PC28].FUNC_CTL = IOC_PC28_FUNC_CTL_FEMC_DQ_06; + + HPM_IOC->PAD[IOC_PAD_PC27].FUNC_CTL = IOC_PC27_FUNC_CTL_FEMC_DQ_05; + + /* SRAM #WE */ + HPM_IOC->PAD[IOC_PAD_PC21].FUNC_CTL = IOC_PC21_FUNC_CTL_FEMC_A_11; + + HPM_IOC->PAD[IOC_PAD_PC17].FUNC_CTL = IOC_PC17_FUNC_CTL_FEMC_A_09; + + HPM_IOC->PAD[IOC_PAD_PC15].FUNC_CTL = IOC_PC15_FUNC_CTL_FEMC_A_10; + + HPM_IOC->PAD[IOC_PAD_PC12].FUNC_CTL = IOC_PC12_FUNC_CTL_FEMC_A_08; + + HPM_IOC->PAD[IOC_PAD_PC11].FUNC_CTL = IOC_PC11_FUNC_CTL_FEMC_A_07; + + HPM_IOC->PAD[IOC_PAD_PC10].FUNC_CTL = IOC_PC10_FUNC_CTL_FEMC_A_06; + + HPM_IOC->PAD[IOC_PAD_PC09].FUNC_CTL = IOC_PC09_FUNC_CTL_FEMC_A_01; + + HPM_IOC->PAD[IOC_PAD_PC08].FUNC_CTL = IOC_PC08_FUNC_CTL_FEMC_A_00; + + HPM_IOC->PAD[IOC_PAD_PC07].FUNC_CTL = IOC_PC07_FUNC_CTL_FEMC_A_05; + + HPM_IOC->PAD[IOC_PAD_PC06].FUNC_CTL = IOC_PC06_FUNC_CTL_FEMC_A_04; + + HPM_IOC->PAD[IOC_PAD_PC05].FUNC_CTL = IOC_PC05_FUNC_CTL_FEMC_A_03; + + HPM_IOC->PAD[IOC_PAD_PC04].FUNC_CTL = IOC_PC04_FUNC_CTL_FEMC_A_02; + + /* SRAM #ADV */ + HPM_IOC->PAD[IOC_PAD_PC14].FUNC_CTL = IOC_PC14_FUNC_CTL_FEMC_BA1; + + HPM_IOC->PAD[IOC_PAD_PC13].FUNC_CTL = IOC_PC13_FUNC_CTL_FEMC_BA0; + + HPM_IOC->PAD[IOC_PAD_PC16].FUNC_CTL = IOC_PC16_FUNC_CTL_FEMC_DQS | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + + HPM_IOC->PAD[IOC_PAD_PC26].FUNC_CTL = IOC_PC26_FUNC_CTL_FEMC_CLK; + + HPM_IOC->PAD[IOC_PAD_PC25].FUNC_CTL = IOC_PC25_FUNC_CTL_FEMC_CKE; + + HPM_IOC->PAD[IOC_PAD_PC19].FUNC_CTL = IOC_PC19_FUNC_CTL_FEMC_CS_0; + + HPM_IOC->PAD[IOC_PAD_PC18].FUNC_CTL = IOC_PC18_FUNC_CTL_FEMC_RAS; + + HPM_IOC->PAD[IOC_PAD_PC23].FUNC_CTL = IOC_PC23_FUNC_CTL_FEMC_CAS; + + HPM_IOC->PAD[IOC_PAD_PC24].FUNC_CTL = IOC_PC24_FUNC_CTL_FEMC_WE; + + /* SRAM #LB */ + HPM_IOC->PAD[IOC_PAD_PC30].FUNC_CTL = IOC_PC30_FUNC_CTL_FEMC_DM_0; + + /* SRAM #UB */ + HPM_IOC->PAD[IOC_PAD_PC31].FUNC_CTL = IOC_PC31_FUNC_CTL_FEMC_DM_1; + + HPM_IOC->PAD[IOC_PAD_PC02].FUNC_CTL = IOC_PC02_FUNC_CTL_FEMC_DM_2; + + HPM_IOC->PAD[IOC_PAD_PC03].FUNC_CTL = IOC_PC03_FUNC_CTL_FEMC_DM_3; + + /* SRAM #CE */ + HPM_IOC->PAD[IOC_PAD_PC20].FUNC_CTL = IOC_PC20_FUNC_CTL_FEMC_CS_1; + + /* SRAM #OE */ + HPM_IOC->PAD[IOC_PAD_PC22].FUNC_CTL = IOC_PC22_FUNC_CTL_FEMC_A_12; +} + +/* + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_gpio_pins_with_pull_up(void) +{ + HPM_IOC->PAD[IOC_PAD_PB12].FUNC_CTL = IOC_PB12_FUNC_CTL_GPIO_B_12; + HPM_IOC->PAD[IOC_PAD_PB12].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(0); +} + +/* + * PZ port IO needs to configure BIOC as well. + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_gpio_pins_using_gpio0(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ02].FUNC_CTL = IOC_PZ02_FUNC_CTL_GPIO_Z_02; + HPM_BIOC->PAD[IOC_PAD_PZ02].FUNC_CTL = BIOC_PZ02_FUNC_CTL_SOC_PZ_02; + HPM_IOC->PAD[IOC_PAD_PZ02].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +/* + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_spi2_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE31].FUNC_CTL = IOC_PE31_FUNC_CTL_SPI2_CSN; + HPM_IOC->PAD[IOC_PAD_PE31].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); + + HPM_IOC->PAD[IOC_PAD_PE30].FUNC_CTL = IOC_PE30_FUNC_CTL_SPI2_MOSI; + HPM_IOC->PAD[IOC_PAD_PE30].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE27].FUNC_CTL = IOC_PE27_FUNC_CTL_SPI2_SCLK | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PE27].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE28].FUNC_CTL = IOC_PE28_FUNC_CTL_SPI2_MISO; + HPM_IOC->PAD[IOC_PAD_PE28].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; +} + +/* + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_spi2_pins_with_gpio_as_cs(void) +{ + HPM_IOC->PAD[IOC_PAD_PE27].FUNC_CTL = IOC_PE27_FUNC_CTL_SPI2_SCLK | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PE27].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE28].FUNC_CTL = IOC_PE28_FUNC_CTL_SPI2_MISO; + HPM_IOC->PAD[IOC_PAD_PE28].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE30].FUNC_CTL = IOC_PE30_FUNC_CTL_SPI2_MOSI; + HPM_IOC->PAD[IOC_PAD_PE30].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE31].FUNC_CTL = IOC_PE31_FUNC_CTL_GPIO_E_31; + HPM_IOC->PAD[IOC_PAD_PE31].PAD_CTL = IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_gptmr3_pins(void) +{ + /* TMR3 compare 1 */ + HPM_IOC->PAD[IOC_PAD_PE24].FUNC_CTL = IOC_PE24_FUNC_CTL_GPTMR3_COMP_1; +} + +void init_gptmr4_pins(void) +{ + /* TMR4 capture 1 */ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PE25_FUNC_CTL_GPTMR4_CAPT_1; +} + +void init_gptmr5_pins(void) +{ + /* TMR5 compare 2 */ + HPM_IOC->PAD[IOC_PAD_PD24].FUNC_CTL = IOC_PD24_FUNC_CTL_TRGM2_P_10; + + /* TMR5 compare 3 */ + HPM_IOC->PAD[IOC_PAD_PD23].FUNC_CTL = IOC_PD23_FUNC_CTL_TRGM2_P_11; + + trgm_output_t trgm2_io_config0 = {0}; + trgm2_io_config0.invert = 0; + trgm2_io_config0.type = trgm_output_same_as_input; + trgm2_io_config0.input = HPM_TRGM2_INPUT_SRC_GPTMR5_OUT2; + trgm_output_config(HPM_TRGM2, HPM_TRGM2_OUTPUT_SRC_TRGM2_P10, &trgm2_io_config0); + + trgm_enable_io_output(HPM_TRGM2, 1 << 10); + + trgm_output_t trgm2_io_config1 = {0}; + trgm2_io_config1.invert = 0; + trgm2_io_config1.type = trgm_output_same_as_input; + trgm2_io_config1.input = HPM_TRGM2_INPUT_SRC_GPTMR5_OUT3; + trgm_output_config(HPM_TRGM2, HPM_TRGM2_OUTPUT_SRC_TRGM2_P11, &trgm2_io_config1); + + trgm_enable_io_output(HPM_TRGM2, 1 << 11); +} + +void init_hall_trgm_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PD16].FUNC_CTL = IOC_PD16_FUNC_CTL_TRGM2_P_06; + + HPM_IOC->PAD[IOC_PAD_PD20].FUNC_CTL = IOC_PD20_FUNC_CTL_TRGM2_P_07; + + HPM_IOC->PAD[IOC_PAD_PD25].FUNC_CTL = IOC_PD25_FUNC_CTL_TRGM2_P_08; +} + +void init_qei_trgm_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PD19].FUNC_CTL = IOC_PD19_FUNC_CTL_TRGM2_P_09; + + HPM_IOC->PAD[IOC_PAD_PD24].FUNC_CTL = IOC_PD24_FUNC_CTL_TRGM2_P_10; +} + +void init_i2s0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF02].FUNC_CTL = IOC_PF02_FUNC_CTL_I2S0_RXD_2; + + HPM_IOC->PAD[IOC_PAD_PF03].FUNC_CTL = IOC_PF03_FUNC_CTL_I2S0_MCLK; + + HPM_IOC->PAD[IOC_PAD_PF04].FUNC_CTL = IOC_PF04_FUNC_CTL_I2S0_TXD_2; + + HPM_IOC->PAD[IOC_PAD_PF06].FUNC_CTL = IOC_PF06_FUNC_CTL_I2S0_BCLK; + + HPM_IOC->PAD[IOC_PAD_PF09].FUNC_CTL = IOC_PF09_FUNC_CTL_I2S0_FCLK; +} + +/* PY port IO needs to configure PIOC */ +void init_dao_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PY08].FUNC_CTL = IOC_PY08_FUNC_CTL_DAOR_P; + HPM_PIOC->PAD[IOC_PAD_PY08].FUNC_CTL = PIOC_PY08_FUNC_CTL_SOC_PY_08; + + HPM_IOC->PAD[IOC_PAD_PY09].FUNC_CTL = IOC_PY09_FUNC_CTL_DAOR_N; + HPM_PIOC->PAD[IOC_PAD_PY09].FUNC_CTL = PIOC_PY09_FUNC_CTL_SOC_PY_09; +} + +/* PY port IO needs to configure PIOC */ +void init_pdm_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PY10].FUNC_CTL = IOC_PY10_FUNC_CTL_PDM0_CLK; + HPM_PIOC->PAD[IOC_PAD_PY10].FUNC_CTL = PIOC_PY10_FUNC_CTL_SOC_PY_10; + + HPM_IOC->PAD[IOC_PAD_PY11].FUNC_CTL = IOC_PY11_FUNC_CTL_PDM0_D_0; + HPM_PIOC->PAD[IOC_PAD_PY11].FUNC_CTL = PIOC_PY11_FUNC_CTL_SOC_PY_11; +} + +void init_vad_pins(void) +{ + HPM_PIOC->PAD[IOC_PAD_PY10].FUNC_CTL = PIOC_PY10_FUNC_CTL_VAD_CLK; + + HPM_PIOC->PAD[IOC_PAD_PY11].FUNC_CTL = PIOC_PY11_FUNC_CTL_VAD_DAT; +} + +void init_cam_pins(void) +{ + /* configure rst pin function, PY port IO needs to configure PIOC */ + HPM_IOC->PAD[IOC_PAD_PY05].FUNC_CTL = IOC_PY05_FUNC_CTL_GPIO_Y_05; + HPM_PIOC->PAD[IOC_PAD_PY05].FUNC_CTL = PIOC_PY05_FUNC_CTL_SOC_PY_05; + + HPM_IOC->PAD[IOC_PAD_PA07].FUNC_CTL = IOC_PA07_FUNC_CTL_CAM0_D_2; + + HPM_IOC->PAD[IOC_PAD_PA03].FUNC_CTL = IOC_PA03_FUNC_CTL_CAM0_D_3; + + HPM_IOC->PAD[IOC_PAD_PA08].FUNC_CTL = IOC_PA08_FUNC_CTL_CAM0_D_4; + + HPM_IOC->PAD[IOC_PAD_PA09].FUNC_CTL = IOC_PA09_FUNC_CTL_CAM0_D_5; + + HPM_IOC->PAD[IOC_PAD_PA00].FUNC_CTL = IOC_PA00_FUNC_CTL_CAM0_D_6; + + HPM_IOC->PAD[IOC_PAD_PA04].FUNC_CTL = IOC_PA04_FUNC_CTL_CAM0_D_7; + + HPM_IOC->PAD[IOC_PAD_PA01].FUNC_CTL = IOC_PA01_FUNC_CTL_CAM0_D_8; + + HPM_IOC->PAD[IOC_PAD_PA02].FUNC_CTL = IOC_PA02_FUNC_CTL_CAM0_D_9; + + HPM_IOC->PAD[IOC_PAD_PA10].FUNC_CTL = IOC_PA10_FUNC_CTL_CAM0_XCLK; + + HPM_IOC->PAD[IOC_PAD_PA05].FUNC_CTL = IOC_PA05_FUNC_CTL_CAM0_HSYNC; + + HPM_IOC->PAD[IOC_PAD_PA06].FUNC_CTL = IOC_PA06_FUNC_CTL_CAM0_VSYNC; + + HPM_IOC->PAD[IOC_PAD_PA11].FUNC_CTL = IOC_PA11_FUNC_CTL_CAM0_PIXCLK; +} + +void init_butn_pins(void) +{ + HPM_BIOC->PAD[IOC_PAD_PZ02].FUNC_CTL = BIOC_PZ02_FUNC_CTL_PBUTN; + + HPM_BIOC->PAD[IOC_PAD_PZ03].FUNC_CTL = BIOC_PZ03_FUNC_CTL_WBUTN; + + HPM_BIOC->PAD[IOC_PAD_PZ04].FUNC_CTL = BIOC_PZ04_FUNC_CTL_PLED; + + HPM_BIOC->PAD[IOC_PAD_PZ05].FUNC_CTL = BIOC_PZ05_FUNC_CTL_WLED; +} + +void init_acmp_pins(void) +{ + /* configure to ACMP_COMP_1(ALT16) function */ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PE25_FUNC_CTL_ACMP_COMP_1; + + /* configure to CMP1_INP7 function */ + HPM_IOC->PAD[IOC_PAD_PE23].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; + + /* configure to CMP1_INN6 function */ + HPM_IOC->PAD[IOC_PAD_PE21].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; +} + +void init_enet0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF00].FUNC_CTL = IOC_PF00_FUNC_CTL_GPIO_F_00; + + HPM_IOC->PAD[IOC_PAD_PE23].FUNC_CTL = IOC_PE23_FUNC_CTL_ETH0_MDIO; + + HPM_IOC->PAD[IOC_PAD_PE22].FUNC_CTL = IOC_PE22_FUNC_CTL_ETH0_MDC; + + HPM_IOC->PAD[IOC_PAD_PD31].FUNC_CTL = IOC_PD31_FUNC_CTL_ETH0_RXD_0; + + HPM_IOC->PAD[IOC_PAD_PE04].FUNC_CTL = IOC_PE04_FUNC_CTL_ETH0_RXD_1; + + HPM_IOC->PAD[IOC_PAD_PE02].FUNC_CTL = IOC_PE02_FUNC_CTL_ETH0_RXD_2; + + HPM_IOC->PAD[IOC_PAD_PE07].FUNC_CTL = IOC_PE07_FUNC_CTL_ETH0_RXD_3; + + HPM_IOC->PAD[IOC_PAD_PE03].FUNC_CTL = IOC_PE03_FUNC_CTL_ETH0_RXCK; + + HPM_IOC->PAD[IOC_PAD_PD30].FUNC_CTL = IOC_PD30_FUNC_CTL_ETH0_RXDV; + + HPM_IOC->PAD[IOC_PAD_PE06].FUNC_CTL = IOC_PE06_FUNC_CTL_ETH0_TXD_0; + + HPM_IOC->PAD[IOC_PAD_PD29].FUNC_CTL = IOC_PD29_FUNC_CTL_ETH0_TXD_1; + + HPM_IOC->PAD[IOC_PAD_PD28].FUNC_CTL = IOC_PD28_FUNC_CTL_ETH0_TXD_2; + + HPM_IOC->PAD[IOC_PAD_PE05].FUNC_CTL = IOC_PE05_FUNC_CTL_ETH0_TXD_3; + + HPM_IOC->PAD[IOC_PAD_PE01].FUNC_CTL = IOC_PE01_FUNC_CTL_ETH0_TXCK; + + HPM_IOC->PAD[IOC_PAD_PE00].FUNC_CTL = IOC_PE00_FUNC_CTL_ETH0_TXEN; +} + +void init_enet1_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE26].FUNC_CTL = IOC_PE26_FUNC_CTL_GPIO_E_26; + + HPM_IOC->PAD[IOC_PAD_PD11].FUNC_CTL = IOC_PD11_FUNC_CTL_ETH1_MDC; + + HPM_IOC->PAD[IOC_PAD_PD14].FUNC_CTL = IOC_PD14_FUNC_CTL_ETH1_MDIO; + + HPM_IOC->PAD[IOC_PAD_PE20].FUNC_CTL = IOC_PE20_FUNC_CTL_ETH1_RXD_0; + + HPM_IOC->PAD[IOC_PAD_PE18].FUNC_CTL = IOC_PE18_FUNC_CTL_ETH1_RXD_1; + + HPM_IOC->PAD[IOC_PAD_PE15].FUNC_CTL = IOC_PE15_FUNC_CTL_ETH1_RXDV; + + HPM_IOC->PAD[IOC_PAD_PE19].FUNC_CTL = IOC_PE19_FUNC_CTL_ETH1_TXD_0; + + HPM_IOC->PAD[IOC_PAD_PE17].FUNC_CTL = IOC_PE17_FUNC_CTL_ETH1_TXD_1; + + HPM_IOC->PAD[IOC_PAD_PE14].FUNC_CTL = IOC_PE14_FUNC_CTL_ETH1_TXEN; + + HPM_IOC->PAD[IOC_PAD_PE16].FUNC_CTL = IOC_PE16_FUNC_CTL_ETH1_REFCLK | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; +} + +void init_pwm2_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PD28].FUNC_CTL = IOC_PD28_FUNC_CTL_PWM2_P_5; + + HPM_IOC->PAD[IOC_PAD_PD29].FUNC_CTL = IOC_PD29_FUNC_CTL_PWM2_P_4; + + HPM_IOC->PAD[IOC_PAD_PD30].FUNC_CTL = IOC_PD30_FUNC_CTL_PWM2_P_1; + + HPM_IOC->PAD[IOC_PAD_PD31].FUNC_CTL = IOC_PD31_FUNC_CTL_PWM2_P_0; + + HPM_IOC->PAD[IOC_PAD_PE03].FUNC_CTL = IOC_PE03_FUNC_CTL_PWM2_P_3; + + HPM_IOC->PAD[IOC_PAD_PE04].FUNC_CTL = IOC_PE04_FUNC_CTL_PWM2_P_2; +} + +void init_pwm3_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE17].FUNC_CTL = IOC_PE17_FUNC_CTL_PWM3_P_6; + + HPM_IOC->PAD[IOC_PAD_PE18].FUNC_CTL = IOC_PE18_FUNC_CTL_PWM3_P_7; +} + +void init_adc12_pins(void) +{ + /* ADC0.VIN11 */ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; +} + +void init_adc16_pins(void) +{ + /* ADC3.INA2 */ + HPM_IOC->PAD[IOC_PAD_PE29].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; +} + +void init_adc_bldc_pins(void) +{ + /* ADC0.VINP7 */ + HPM_IOC->PAD[IOC_PAD_PE21].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; + + /* ADC1.VINP10 */ + HPM_IOC->PAD[IOC_PAD_PE24].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; + + /* ADC2.VINP11 */ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; +} + +void init_usb0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF10].FUNC_CTL = IOC_PF10_FUNC_CTL_USB0_ID; + + HPM_IOC->PAD[IOC_PAD_PF08].FUNC_CTL = IOC_PF08_FUNC_CTL_USB0_OC; +} + +void init_usb1_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF07].FUNC_CTL = IOC_PF07_FUNC_CTL_USB1_ID; + + HPM_IOC->PAD[IOC_PAD_PF05].FUNC_CTL = IOC_PF05_FUNC_CTL_USB1_OC; +} + +void init_can0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PB15].FUNC_CTL = IOC_PB15_FUNC_CTL_CAN0_TXD; + + HPM_IOC->PAD[IOC_PAD_PB17].FUNC_CTL = IOC_PB17_FUNC_CTL_CAN0_RXD; +} + +void init_mcan0_transceiver_phy_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PB14].FUNC_CTL = IOC_PB14_FUNC_CTL_GPIO_B_14; +} + +void init_sdxc1_cmd_pin_enable_1v8_enable_opendrain(void) +{ + /* SDXC1.CMD */ + HPM_IOC->PAD[IOC_PAD_PD21].FUNC_CTL = IOC_PD21_FUNC_CTL_SDC1_CMD | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PD21].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1) | IOC_PAD_PAD_CTL_OD_SET(1); +} + +void init_sdxc1_cmd_pin_enable_1v8_disable_opendrain(void) +{ + /* SDXC1.CMD */ + HPM_IOC->PAD[IOC_PAD_PD21].FUNC_CTL = IOC_PD21_FUNC_CTL_SDC1_CMD | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PD21].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1) | IOC_PAD_PAD_CTL_OD_SET(0); +} + +void init_sdxc1_cmd_pin_disable_1v8_enable_opendrain(void) +{ + /* SDXC1.CMD */ + HPM_IOC->PAD[IOC_PAD_PD21].FUNC_CTL = IOC_PD21_FUNC_CTL_SDC1_CMD | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PD21].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1) | IOC_PAD_PAD_CTL_OD_SET(1); +} + +void init_sdxc1_cmd_pin_disable_1v8_disable_opendrain(void) +{ + /* SDXC1.CMD */ + HPM_IOC->PAD[IOC_PAD_PD21].FUNC_CTL = IOC_PD21_FUNC_CTL_SDC1_CMD | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PD21].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1) | IOC_PAD_PAD_CTL_OD_SET(0); +} + +void init_sdxc1_cd_pin(void) +{ + /* SDXC1.CDN */ + HPM_IOC->PAD[IOC_PAD_PD15].FUNC_CTL = IOC_PD15_FUNC_CTL_GPIO_D_15; + HPM_IOC->PAD[IOC_PAD_PD15].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_clk_data_pins_enable_1v8(void) +{ + /* SDXC1.CLK */ + HPM_IOC->PAD[IOC_PAD_PD22].FUNC_CTL = IOC_PD22_FUNC_CTL_SDC1_CLK; + HPM_IOC->PAD[IOC_PAD_PD22].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA0 */ + HPM_IOC->PAD[IOC_PAD_PD18].FUNC_CTL = IOC_PD18_FUNC_CTL_SDC1_DATA_0; + HPM_IOC->PAD[IOC_PAD_PD18].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_clk_data_pins_disable_1v8(void) +{ + /* SDXC1.CLK */ + HPM_IOC->PAD[IOC_PAD_PD22].FUNC_CTL = IOC_PD22_FUNC_CTL_SDC1_CLK; + HPM_IOC->PAD[IOC_PAD_PD22].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA0 */ + HPM_IOC->PAD[IOC_PAD_PD18].FUNC_CTL = IOC_PD18_FUNC_CTL_SDC1_DATA_0; + HPM_IOC->PAD[IOC_PAD_PD18].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_clk_data_pins_width4_enable_1v8(void) +{ + /* SDXC1.DATA1 */ + HPM_IOC->PAD[IOC_PAD_PD17].FUNC_CTL = IOC_PD17_FUNC_CTL_SDC1_DATA_1; + HPM_IOC->PAD[IOC_PAD_PD17].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA2 */ + HPM_IOC->PAD[IOC_PAD_PD27].FUNC_CTL = IOC_PD27_FUNC_CTL_SDC1_DATA_2; + HPM_IOC->PAD[IOC_PAD_PD27].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA3 */ + HPM_IOC->PAD[IOC_PAD_PD26].FUNC_CTL = IOC_PD26_FUNC_CTL_SDC1_DATA_3; + HPM_IOC->PAD[IOC_PAD_PD26].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.CLK */ + HPM_IOC->PAD[IOC_PAD_PD22].FUNC_CTL = IOC_PD22_FUNC_CTL_SDC1_CLK; + HPM_IOC->PAD[IOC_PAD_PD22].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA0 */ + HPM_IOC->PAD[IOC_PAD_PD18].FUNC_CTL = IOC_PD18_FUNC_CTL_SDC1_DATA_0; + HPM_IOC->PAD[IOC_PAD_PD18].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_clk_data_pins_width4_disable_1v8(void) +{ + /* SDXC1.DATA1 */ + HPM_IOC->PAD[IOC_PAD_PD17].FUNC_CTL = IOC_PD17_FUNC_CTL_SDC1_DATA_1; + HPM_IOC->PAD[IOC_PAD_PD17].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA2 */ + HPM_IOC->PAD[IOC_PAD_PD27].FUNC_CTL = IOC_PD27_FUNC_CTL_SDC1_DATA_2; + HPM_IOC->PAD[IOC_PAD_PD27].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA3 */ + HPM_IOC->PAD[IOC_PAD_PD26].FUNC_CTL = IOC_PD26_FUNC_CTL_SDC1_DATA_3; + HPM_IOC->PAD[IOC_PAD_PD26].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.CLK */ + HPM_IOC->PAD[IOC_PAD_PD22].FUNC_CTL = IOC_PD22_FUNC_CTL_SDC1_CLK; + HPM_IOC->PAD[IOC_PAD_PD22].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA0 */ + HPM_IOC->PAD[IOC_PAD_PD18].FUNC_CTL = IOC_PD18_FUNC_CTL_SDC1_DATA_0; + HPM_IOC->PAD[IOC_PAD_PD18].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_pwr_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PC20].FUNC_CTL = IOC_PC20_FUNC_CTL_GPIO_C_20; + HPM_IOC->PAD[IOC_PAD_PC20].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_clk_obs_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PB02].FUNC_CTL = IOC_PB02_FUNC_CTL_SYSCTL_CLK_OBS_0; +} + +void init_rgb_pwm_pins(void) +{ + /* Red */ + HPM_IOC->PAD[IOC_PAD_PB11].FUNC_CTL = IOC_PB11_FUNC_CTL_TRGM1_P_01; + + /* Green */ + HPM_IOC->PAD[IOC_PAD_PB12].FUNC_CTL = IOC_PB12_FUNC_CTL_TRGM0_P_06; + + /* BLUE */ + HPM_IOC->PAD[IOC_PAD_PB13].FUNC_CTL = IOC_PB13_FUNC_CTL_TRGM1_P_03; +} + +void init_led_pins_as_gpio(void) +{ + HPM_IOC->PAD[IOC_PAD_PB11].FUNC_CTL = IOC_PB11_FUNC_CTL_GPIO_B_11; + + HPM_IOC->PAD[IOC_PAD_PB12].FUNC_CTL = IOC_PB12_FUNC_CTL_GPIO_B_12; + + HPM_IOC->PAD[IOC_PAD_PB13].FUNC_CTL = IOC_PB13_FUNC_CTL_GPIO_B_13; +} + +void init_enet_pps_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF05].FUNC_CTL = IOC_PF05_FUNC_CTL_ETH0_EVTO_0; +} + +void init_enet_pps_capture_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PE25_FUNC_CTL_ETH0_EVTI_1; +} + +void init_tamper_pins(void) +{ + HPM_BIOC->PAD[IOC_PAD_PZ08].FUNC_CTL = BIOC_PZ08_FUNC_CTL_TAMP_08 | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + + HPM_BIOC->PAD[IOC_PAD_PZ09].FUNC_CTL = BIOC_PZ09_FUNC_CTL_TAMP_09; + + HPM_BIOC->PAD[IOC_PAD_PZ10].FUNC_CTL = BIOC_PZ10_FUNC_CTL_TAMP_10; +} + +/* for uart_rx_line_status case, need to a gpio pin to sent break signal */ +void init_uart_break_signal_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PE31].FUNC_CTL = IOC_PE31_FUNC_CTL_GPIO_E_31; + HPM_IOC->PAD[IOC_PAD_PE31].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_gptmr3_channel_pin_as_output(void) +{ + HPM_IOC->PAD[IOC_PAD_PE24].FUNC_CTL = IOC_PE24_FUNC_CTL_GPTMR3_COMP_1; +} + +void init_gptmr4_channel_pin_as_capture(void) +{ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PE25_FUNC_CTL_GPTMR4_CAPT_1; +} + +void init_gptmr5_channel2_pin_as_output(void) +{ + HPM_IOC->PAD[IOC_PAD_PD24].FUNC_CTL = IOC_PD24_FUNC_CTL_TRGM2_P_10; + + trgm_output_t trgm2_io_config0 = {0}; + trgm2_io_config0.invert = 0; + trgm2_io_config0.type = trgm_output_same_as_input; + trgm2_io_config0.input = HPM_TRGM2_INPUT_SRC_GPTMR5_OUT2; + trgm_output_config(HPM_TRGM2, HPM_TRGM2_OUTPUT_SRC_TRGM2_P10, &trgm2_io_config0); + + trgm_enable_io_output(HPM_TRGM2, 1 << 10); +} + +void init_gptmr5_channel3_pin_as_output(void) +{ + HPM_IOC->PAD[IOC_PAD_PD23].FUNC_CTL = IOC_PD23_FUNC_CTL_TRGM2_P_11; + + trgm_output_t trgm2_io_config0 = {0}; + trgm2_io_config0.invert = 0; + trgm2_io_config0.type = trgm_output_same_as_input; + trgm2_io_config0.input = HPM_TRGM2_INPUT_SRC_GPTMR5_OUT3; + trgm_output_config(HPM_TRGM2, HPM_TRGM2_OUTPUT_SRC_TRGM2_P11, &trgm2_io_config0); + + trgm_enable_io_output(HPM_TRGM2, 1 << 11); +} + +void init_clk_ref_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PE24].FUNC_CTL = IOC_PE24_FUNC_CTL_SOC_REF1; +} + +void init_brownout_indicate_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PE30].FUNC_CTL = IOC_PE30_FUNC_CTL_GPIO_E_30; +} + +void board_init_i2c_eeprom_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ11].FUNC_CTL = IOC_PZ11_FUNC_CTL_I2C0_SCL | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_BIOC->PAD[IOC_PAD_PZ11].FUNC_CTL = BIOC_PZ11_FUNC_CTL_SOC_PZ_11; + HPM_IOC->PAD[IOC_PAD_PZ11].PAD_CTL = IOC_PAD_PAD_CTL_OD_SET(1); + + HPM_IOC->PAD[IOC_PAD_PZ10].FUNC_CTL = IOC_PZ10_FUNC_CTL_I2C0_SDA | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_BIOC->PAD[IOC_PAD_PZ10].FUNC_CTL = BIOC_PZ10_FUNC_CTL_SOC_PZ_10; + HPM_IOC->PAD[IOC_PAD_PZ10].PAD_CTL = IOC_PAD_PAD_CTL_OD_SET(1); +} diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h b/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h new file mode 100644 index 000000000..460feded2 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h @@ -0,0 +1,89 @@ + +/* + * Copyright (c) 2025 HPMicro + * + * SPDX-License-Identifier: BSD-3-Clause + * + * + * Automatically generated by HPM Pinmux Tool + * + * + * Note: + * PY and PZ IOs: if any SOC pin function needs to be routed to these IOs, + * besides of IOC, PIOC/BIOC needs to be configured SOC_GPIO_X_xx, so that + * expected SoC function can be enabled on these IOs. + */ + +#ifndef HPM_PINMUX_H +#define HPM_PINMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +void init_uart0_pins(void); +void init_uart2_pins(void); +void init_uart13_pins(void); +void init_puart_pins(void); +void init_uart13_pins_as_gpio(void); +void init_lcd0_pins(void); +void init_cap_pins(void); +void init_i2c0_pins_as_gpio(void); +void init_i2c0_pins(void); +void init_femc_pins(void); +void init_gpio_pins_with_pull_up(void); +void init_gpio_pins_using_gpio0(void); +void init_spi2_pins(void); +void init_spi2_pins_with_gpio_as_cs(void); +void init_gptmr3_pins(void); +void init_gptmr4_pins(void); +void init_gptmr5_pins(void); +void init_hall_trgm_pins(void); +void init_qei_trgm_pins(void); +void init_i2s0_pins(void); +void init_dao_pins(void); +void init_pdm_pins(void); +void init_vad_pins(void); +void init_cam_pins(void); +void init_butn_pins(void); +void init_acmp_pins(void); +void init_enet0_pins(void); +void init_enet1_pins(void); +void init_pwm2_pins(void); +void init_pwm3_pins(void); +void init_adc12_pins(void); +void init_adc16_pins(void); +void init_adc_bldc_pins(void); +void init_usb0_pins(void); +void init_usb1_pins(void); +void init_can0_pins(void); +void init_mcan0_transceiver_phy_pin(void); +void init_sdxc1_cmd_pin_enable_1v8_enable_opendrain(void); +void init_sdxc1_cmd_pin_enable_1v8_disable_opendrain(void); +void init_sdxc1_cmd_pin_disable_1v8_enable_opendrain(void); +void init_sdxc1_cmd_pin_disable_1v8_disable_opendrain(void); +void init_sdxc1_cd_pin(void); +void init_sdxc1_clk_data_pins_enable_1v8(void); +void init_sdxc1_clk_data_pins_disable_1v8(void); +void init_sdxc1_clk_data_pins_width4_enable_1v8(void); +void init_sdxc1_clk_data_pins_width4_disable_1v8(void); +void init_sdxc1_pwr_pin(void); +void init_clk_obs_pins(void); +void init_rgb_pwm_pins(void); +void init_led_pins_as_gpio(void); +void init_enet_pps_pins(void); +void init_enet_pps_capture_pins(void); +void init_tamper_pins(void); +void init_uart_break_signal_pin(void); +void init_gptmr3_channel_pin_as_output(void); +void init_gptmr4_channel_pin_as_capture(void); +void init_gptmr5_channel2_pin_as_output(void); +void init_gptmr5_channel3_pin_as_output(void); +void init_clk_ref_pin(void); +void init_brownout_indicate_pin(void); +void board_init_i2c_eeprom_pin(void); + +#ifdef __cplusplus +} +#endif +#endif /* HPM_PINMUX_H */ diff --git a/hw/bsp/hpmicro/family.c b/hw/bsp/hpmicro/family.c new file mode 100644 index 000000000..ffec2523a --- /dev/null +++ b/hw/bsp/hpmicro/family.c @@ -0,0 +1,115 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: HPMicro +*/ + +#include "bsp/board_api.h" +#include "board.h" +#include "hpm_clock_drv.h" +#include "hpm_uart_drv.h" +#include "hpm_gpio_drv.h" +#include "hpm_romapi.h" + + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void) { + board_init_clock(); + board_init_pmp(); + + board_init_usb(HPM_USB0); +#ifdef HPM_USB1 + board_init_usb(HPM_USB1); +#endif + + board_init_console(); + board_init_gpio_pins(); + board_init_led_pins(); +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +SDK_DECLARE_EXT_ISR_M(IRQn_USB0, isr_usb0) +void isr_usb0(void) { + tusb_int_handler(0, true); +} + +#ifdef HPM_USB1_BASE +SDK_DECLARE_EXT_ISR_M(IRQn_USB1, isr_usb1) +void isr_usb1(void) { + tusb_int_handler(1, true); +} +#endif + +void board_led_write(bool state) { + if (state) { + gpio_write_pin(BOARD_LED_GPIO_CTRL, BOARD_LED_GPIO_INDEX, BOARD_LED_GPIO_PIN, BOARD_LED_ON_LEVEL); + } else { + gpio_write_pin(BOARD_LED_GPIO_CTRL, BOARD_LED_GPIO_INDEX, BOARD_LED_GPIO_PIN, BOARD_LED_OFF_LEVEL); + } +} + +uint32_t board_button_read(void) { + return (gpio_read_pin(BOARD_APP_GPIO_CTRL, BOARD_APP_GPIO_INDEX, BOARD_APP_GPIO_PIN) == BOARD_BUTTON_PRESSED_VALUE) ? 1 : 0; +} + +// Get characters from UART. Return number of read bytes +int board_uart_read(uint8_t *buf, int len) { + int count = 0; + hpm_stat_t status; + + while (count < len) { + status = uart_try_receive_byte((UART_Type *)BOARD_CONSOLE_UART_BASE, (uint8_t *)&buf[count]); + if (status == status_success) { + count++; + } else { + break; + } + } + + return count; +} + +// Send characters to UART. Return number of sent bytes +int board_uart_write(void const *buf, int len) { + uart_send_data((UART_Type *)BOARD_CONSOLE_UART_BASE, (uint8_t const *)buf, len); + + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +// Get current milliseconds, must be implemented when no RTOS is used +uint32_t board_millis(void) { + return (hpm_csr_get_core_cycle() / clock_get_core_clock_ticks_per_ms()); +} + +#endif diff --git a/hw/bsp/hpmicro/family.cmake b/hw/bsp/hpmicro/family.cmake new file mode 100644 index 000000000..4500f326f --- /dev/null +++ b/hw/bsp/hpmicro/family.cmake @@ -0,0 +1,131 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/hpmicro/hpm_sdk) + +set(CROSS_COMPILE "riscv32-unknown-elf-") + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +if (NOT DEFINED CMAKE_SYSTEM_CPU) + set(CMAKE_SYSTEM_CPU rv32imac-ilp32 CACHE INTERNAL "System Processor") +endif () +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS HPMIRCO CACHE INTERNAL "") + +#------------------------------------ +# Startup & Linker script +#------------------------------------ +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${HPM_SOC}/toolchains/gcc/flash_xip.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) + +set(STARTUP_FILE_GNU ${HPM_SOC}/toolchains/gcc/start.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} STATIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/pinmux.c + ${HPM_SOC}/boot/hpm_bootheader.c + ${HPM_SOC}/toolchains/gcc/initfini.c + ${HPM_SOC}/toolchains/reset.c + ${HPM_SOC}/toolchains/trap.c + ${HPM_SOC}/system.c + ${HPM_SOC}/hpm_sysctl_drv.c + ${HPM_SOC}/hpm_clock_drv.c + ${HPM_SOC}/hpm_otp_drv.c + ${SDK_DIR}/arch/riscv/l1c/hpm_l1c_drv.c + ${SDK_DIR}/drivers/src/hpm_gpio_drv.c + ${SDK_DIR}/drivers/src/hpm_uart_drv.c + ${SDK_DIR}/drivers/src/hpm_usb_drv.c + ${SDK_DIR}/drivers/src/hpm_pcfg_drv.c + ${SDK_DIR}/drivers/src/hpm_pmp_drv.c + ${SDK_DIR}/drivers/src/${HPM_PLLCTL_DRV_FILE} + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + FLASH_XIP + [=[CFG_TUD_MEM_SECTION=__attribute__((section(".noncacheable.non_init")))]=] + [=[CFG_TUH_MEM_SECTION=__attribute__((section(".noncacheable.non_init")))]=] + ) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board + ${HPM_SOC} + ${HPM_IP_REGS} + ${HPM_SOC}/boot + ${HPM_SOC}/toolchains + ${HPM_SOC}/toolchains/gcc + ${SDK_DIR}/arch + ${SDK_DIR}/arch/riscv/intc + ${SDK_DIR}/arch/riscv/l1c + ${SDK_DIR}/drivers/inc + ) + + update_board(${BOARD_TARGET}) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_HPM) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${SDK_DIR}/utils/hpm_sbrk.c + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c + ${TOP}/src/portable/ehci/ehci.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ${TOP}/src/portable/chipidea/ci_hs + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + -Wl,--defsym,_flash_size=${BOARD_FLASH_SIZE} + -Wl,--defsym,_stack_size=${BOARD_STACK_SIZE} + -Wl,--defsym,_heap_size=${BOARD_HEAP_SIZE} + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -Wl,--defsym,_flash_size=${BOARD_FLASH_SIZE} + -Wl,--defsym,_stack_size=${BOARD_STACK_SIZE} + -Wl,--defsym,_heap_size=${BOARD_HEAP_SIZE} + ) + endif () + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties( + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${SDK_DIR}/utils/hpm_sbrk.c + PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes -Wno-cast-align -Wno-discarded-qualifiers" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/hpmicro/family.mk b/hw/bsp/hpmicro/family.mk new file mode 100644 index 000000000..9721e2f7d --- /dev/null +++ b/hw/bsp/hpmicro/family.mk @@ -0,0 +1,76 @@ +SDK_DIR = hw/mcu/hpmicro/hpm_sdk + +CROSS_COMPILE ?= riscv32-unknown-elf- + +include $(TOP)/$(BOARD_PATH)/board.mk + +CPU_CORE ?= rv32imac-ilp32 + +# All source paths should be relative to the top level. +LD_FILE = $(HPM_SOC)/toolchains/gcc/flash_xip.ld + +CFLAGS += \ + -DFLASH_XIP \ + -DCFG_TUSB_MCU=OPT_MCU_HPM \ + -DCFG_TUD_MEM_SECTION='__attribute__((section(".noncacheable.non_init")))' \ + -DCFG_TUH_MEM_SECTION='__attribute__((section(".noncacheable.non_init")))' + +ifdef BOARD_TUD_RHPORT +CFLAGS += -DBOARD_TUD_RHPORT=$(BOARD_TUD_RHPORT) +CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED +endif + +ifdef BOARD_TUH_RHPORT +CFLAGS += -DBOARD_TUH_RHPORT=$(BOARD_TUH_RHPORT) +CFLAGS += -DBOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED +endif + +# mcu driver cause following warnings +CFLAGS += -Wno-error=cast-align -Wno-error=double-promotion -Wno-error=discarded-qualifiers \ + -Wno-error=undef -Wno-error=unused-parameter -Wno-error=redundant-decls + +LDFLAGS_GCC += \ + -nostartfiles \ + --specs=nosys.specs --specs=nano.specs + +LDFLAGS += -Wl,--defsym,_flash_size=$(BOARD_FLASH_SIZE) +LDFLAGS += -Wl,--defsym,_stack_size=$(BOARD_STACK_SIZE) +LDFLAGS += -Wl,--defsym,_heap_size=$(BOARD_HEAP_SIZE) + +SRC_C += \ + src/portable/chipidea/ci_hs/dcd_ci_hs.c \ + src/portable/chipidea/ci_hs/hcd_ci_hs.c \ + src/portable/ehci/ehci.c \ + ${BOARD_PATH}/board.c \ + ${BOARD_PATH}/pinmux.c \ + $(HPM_SOC)/boot/hpm_bootheader.c \ + $(HPM_SOC)/toolchains/gcc/initfini.c \ + $(HPM_SOC)/toolchains/reset.c \ + $(HPM_SOC)/toolchains/trap.c \ + $(HPM_SOC)/system.c \ + $(HPM_SOC)/hpm_sysctl_drv.c \ + $(HPM_SOC)/hpm_clock_drv.c \ + $(HPM_SOC)/hpm_otp_drv.c \ + $(SDK_DIR)/arch/riscv/l1c/hpm_l1c_drv.c \ + $(SDK_DIR)/utils/hpm_sbrk.c \ + $(SDK_DIR)/drivers/src/hpm_gpio_drv.c \ + $(SDK_DIR)/drivers/src/hpm_uart_drv.c \ + $(SDK_DIR)/drivers/src/hpm_usb_drv.c \ + $(SDK_DIR)/drivers/src/hpm_pcfg_drv.c \ + $(SDK_DIR)/drivers/src/hpm_pmp_drv.c \ + $(SDK_DIR)/drivers/src/$(HPM_PLLCTL_DRV_FILE) \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/src/portable/chipidea/ci_hs \ + $(TOP)/$(HPM_SOC) \ + $(TOP)/$(HPM_IP_REGS) \ + $(TOP)/$(HPM_SOC)/boot \ + $(TOP)/$(HPM_SOC)/toolchains \ + $(TOP)/$(HPM_SOC)/toolchains/gcc \ + $(TOP)/$(SDK_DIR)/arch \ + $(TOP)/$(SDK_DIR)/arch/riscv/intc \ + $(TOP)/$(SDK_DIR)/arch/riscv/l1c \ + $(TOP)/$(SDK_DIR)/drivers/inc \ + +SRC_S += $(HPM_SOC)/toolchains/gcc/start.S diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 1e773bf96..95fbc061f 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -653,6 +653,18 @@ #define TUP_USBIP_DWC2_AT32 #define TUP_DCD_ENDPOINT_MAX 8 +//--------------------------------------------------------------------+ +// HPMicro +//--------------------------------------------------------------------+ +#elif TU_CHECK_MCU(OPT_MCU_HPM) + #define TUP_USBIP_CHIPIDEA_HS + #define TUP_USBIP_EHCI + + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_RHPORT_HIGHSPEED 1 + + #define TU_ATTR_FAST_FUNC __attribute__((section(".fast"))) + #endif //--------------------------------------------------------------------+ diff --git a/src/portable/chipidea/ci_hs/ci_hs_hpm.h b/src/portable/chipidea/ci_hs/ci_hs_hpm.h new file mode 100644 index 000000000..68211448c --- /dev/null +++ b/src/portable/chipidea/ci_hs/ci_hs_hpm.h @@ -0,0 +1,54 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _CI_HS_HPM_H_ +#define _CI_HS_HPM_H_ + +#include "ci_hs_type.h" +#include "hpm_soc.h" +#include "hpm_interrupt.h" +#include "hpm_usb_drv.h" + +static const ci_hs_controller_t _ci_controller[] = +{ + { .reg_base = HPM_USB0_BASE, .irqnum = IRQn_USB0}, + #ifdef HPM_USB1_BASE + { .reg_base = HPM_USB1_BASE, .irqnum = IRQn_USB1}, + #endif +}; + +#define CI_HS_REG(_port) ((ci_hs_regs_t*) _ci_controller[_port].reg_base) + +//------------- DCD -------------// +#define CI_DCD_INT_ENABLE(_p) intc_m_enable_irq (_ci_controller[_p].irqnum) +#define CI_DCD_INT_DISABLE(_p) intc_m_disable_irq(_ci_controller[_p].irqnum) + +//------------- HCD -------------// +#define CI_HCD_INT_ENABLE(_p) intc_m_enable_irq (_ci_controller[_p].irqnum) +#define CI_HCD_INT_DISABLE(_p) intc_m_disable_irq(_ci_controller[_p].irqnum) + + +#endif diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 4a5e5c91f..00df434d8 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -55,6 +55,10 @@ bool dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { // MCX N9 only port 1 use this controller #include "ci_hs_mcx.h" +#elif TU_CHECK_MCU(OPT_MCU_HPM) + + #include "ci_hs_hpm.h" + #else #error "Unsupported MCUs" #endif @@ -230,6 +234,10 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { TU_ASSERT(ci_ep_count(dcd_reg) <= TUP_DCD_ENDPOINT_MAX); +#if TU_CHECK_MCU(OPT_MCU_HPM) + usb_phy_init((USB_Type *)dcd_reg, false); +#endif + // Reset controller dcd_reg->USBCMD |= USBCMD_RESET; while( dcd_reg->USBCMD & USBCMD_RESET ) {} @@ -246,7 +254,11 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { #endif #if !TUD_OPT_HIGH_SPEED - dcd_reg->PORTSC1 = PORTSC1_FORCE_FULL_SPEED; + dcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; +#endif + +#if TU_CHECK_MCU(OPT_MCU_HPM) + dcd_reg->PORTSC1 &= ~USB_PORTSC1_STS_MASK; #endif dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index b5324a754..922d32989 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -61,6 +61,10 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { #include "ci_hs_lpc18_43.h" +#elif TU_CHECK_MCU(OPT_MCU_HPM) + +#include "ci_hs_hpm.h" + #else #error "Unsupported MCUs" #endif @@ -77,6 +81,10 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rh_init; ci_hs_regs_t *hcd_reg = CI_HS_REG(rhport); +#if CFG_TUSB_MCU == OPT_MCU_HPM + usb_phy_init((USB_Type *)hcd_reg, true); +#endif + // Reset controller hcd_reg->USBCMD |= USBCMD_RESET; while ( hcd_reg->USBCMD & USBCMD_RESET ) {} diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index c33c970e4..0d6f5ef12 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -44,6 +44,10 @@ #include "fsl_device_registers.h" #endif +#if TU_CHECK_MCU(OPT_MCU_HPM) +#include "ci_hs_hpm.h" +#endif + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -237,6 +241,14 @@ void hcd_port_reset(uint8_t rhport) { // mask out Write-1-to-Clear bits uint32_t portsc = regs->portsc & ~EHCI_PORTSC_MASK_W1C; +#if TU_CHECK_MCU(OPT_MCU_HPM) + if (usb_phy_get_line_state((USB_Type *)CI_HS_REG(rhport)) == usb_line_state2) { + portsc |= USB_PORTSC1_STS_MASK; + } else { + portsc &= ~USB_PORTSC1_STS_MASK; + } +#endif + // EHCI Table 2-16 PortSC // when software writes Port Reset bit to a one, it must also write a zero to the Port Enable bit. portsc &= ~(EHCI_PORTSC_MASK_PORT_EANBLED); diff --git a/src/tusb_option.h b/src/tusb_option.h index 1dc920d84..cd131c119 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -216,6 +216,9 @@ #define OPT_MCU_AT32F425 2505 ///< ArteryTek AT32F425 #define OPT_MCU_AT32F413 2506 ///< ArteryTek AT32F413 +// HPMicro +#define OPT_MCU_HPM 2600 ///< HPMicro + // Check if configured MCU is one of listed // Apply TU_MCU_IS_EQUAL with || as separator to list of input #define TU_MCU_IS_EQUAL(_m) (CFG_TUSB_MCU == (_m)) diff --git a/tools/get_deps.py b/tools/get_deps.py index b1b50d319..42ead17ff 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -244,6 +244,9 @@ deps_optional = { 'hw/mcu/artery/at32f413': ['https://github.com/ArteryTek/AT32F413_Firmware_Library.git', 'f6fe62dfec9fd40c5b63d92fc5ef2c2b5e77a450', 'at32f413'], + 'hw/mcu/hpmicro/hpm_sdk': ['https://github.com/hpmicro/hpm_sdk', + '8d2af741ecc4aaa82d7ee395dc1ce25d7070c3ff', + 'hpm_sdk hpmicro hpm6750 hpm6300 hpm6200 hpm6800 hpm5300 hpm6e00 hpm5e00'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' -- cgit v1.3.1 From 6b73d786b3ddddcb1fbed51909095a46d68d2449 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Mon, 8 Dec 2025 17:14:12 +0800 Subject: update risc-v march for gcc and clang toolchains - add `zifencei` option Signed-off-by: Zhihong Chen --- examples/build_system/cmake/cpu/rv32imac-ilp32.cmake | 4 ++-- examples/build_system/make/cpu/rv32imac-ilp32.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake index 584d90519..8c2538cee 100644 --- a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake +++ b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake @@ -1,13 +1,13 @@ if (TOOLCHAIN STREQUAL "gcc") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32imac_zicsr + -march=rv32imac_zicsr_zifencei -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") elseif (TOOLCHAIN STREQUAL "clang") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32imac_zicsr + -march=rv32imac_zicsr_zifencei -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") diff --git a/examples/build_system/make/cpu/rv32imac-ilp32.mk b/examples/build_system/make/cpu/rv32imac-ilp32.mk index 19c322ebc..a7b2258d7 100644 --- a/examples/build_system/make/cpu/rv32imac-ilp32.mk +++ b/examples/build_system/make/cpu/rv32imac-ilp32.mk @@ -1,11 +1,11 @@ ifeq ($(TOOLCHAIN),gcc) CFLAGS += \ - -march=rv32imac_zicsr \ + -march=rv32imac_zicsr_zifencei \ -mabi=ilp32 \ else ifeq ($(TOOLCHAIN),clang) CFLAGS += \ - -march=rv32imac_zicsr \ + -march=rv32imac_zicsr_zifencei \ -mabi=ilp32 \ else ifeq ($(TOOLCHAIN),iar) -- cgit v1.3.1 From d8da458a0b5a8806c2a7453c1a09bdf40f801fc5 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Tue, 9 Dec 2025 17:58:31 +0800 Subject: example: host: support hpmicro family Signed-off-by: Zhihong Chen --- examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/device_info/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + examples/host/midi_rx/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + 6 files changed, 6 insertions(+) diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 52e51242c..3e5161c3c 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 52e51242c..3e5161c3c 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index becc8252d..b9a47ee3c 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,4 +1,5 @@ family:espressif +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index 35b7c2361..2ec21d19a 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index a3976f08d..555305782 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 52e51242c..3e5161c3c 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X -- cgit v1.3.1 From d851e827211b8a9a0041d28dda3865a7e0dead19 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Tue, 9 Dec 2025 19:00:20 +0800 Subject: example: with FreeRTOS: skip hpmicro Signed-off-by: Zhihong Chen --- examples/device/audio_4_channel_mic_freertos/skip.txt | 1 + examples/device/audio_test_freertos/skip.txt | 1 + examples/device/cdc_msc_freertos/skip.txt | 1 + examples/device/hid_composite_freertos/skip.txt | 1 + examples/device/midi_test_freertos/skip.txt | 1 + 5 files changed, 5 insertions(+) diff --git a/examples/device/audio_4_channel_mic_freertos/skip.txt b/examples/device/audio_4_channel_mic_freertos/skip.txt index 65925b32c..4c2780096 100644 --- a/examples/device/audio_4_channel_mic_freertos/skip.txt +++ b/examples/device/audio_4_channel_mic_freertos/skip.txt @@ -18,3 +18,4 @@ board:lpcxpresso1347 family:broadcom_32bit family:broadcom_64bit family:nuc121_125 +family:hpmicro diff --git a/examples/device/audio_test_freertos/skip.txt b/examples/device/audio_test_freertos/skip.txt index c9cdacad7..2da7808e7 100644 --- a/examples/device/audio_test_freertos/skip.txt +++ b/examples/device/audio_test_freertos/skip.txt @@ -16,3 +16,4 @@ family:broadcom_32bit family:broadcom_64bit board:stm32l0538disco family:nuc121_125 +family:hpmicro diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index 69fc883e6..d90741df7 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -16,3 +16,4 @@ mcu:STM32L0 family:broadcom_32bit family:broadcom_64bit family:nuc121_125 +family:hpmicro diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt index 650bf355b..01990a5b4 100644 --- a/examples/device/hid_composite_freertos/skip.txt +++ b/examples/device/hid_composite_freertos/skip.txt @@ -14,3 +14,4 @@ mcu:VALENTYUSB_EPTRI mcu:RAXXX family:broadcom_32bit family:broadcom_64bit +family:hpmicro diff --git a/examples/device/midi_test_freertos/skip.txt b/examples/device/midi_test_freertos/skip.txt index 650bf355b..01990a5b4 100644 --- a/examples/device/midi_test_freertos/skip.txt +++ b/examples/device/midi_test_freertos/skip.txt @@ -14,3 +14,4 @@ mcu:VALENTYUSB_EPTRI mcu:RAXXX family:broadcom_32bit family:broadcom_64bit +family:hpmicro -- cgit v1.3.1 From 0d1521e42e8f711944db2f1571953c12e5c07dd1 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Thu, 11 Dec 2025 10:38:22 +0800 Subject: update README.rst to add HPMicro MCU Signed-off-by: Zhihong Chen --- README.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/README.rst b/README.rst index da1f49fcd..dc6509bfb 100644 --- a/README.rst +++ b/README.rst @@ -159,6 +159,8 @@ Supported CPUs +--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ | GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| HPMicro | HPM6750 | ✔ | ✔ | ✔ | ci_hs, ehci | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ | Infineon | XMC4500 | ✔ | ✔ | ✖ | dwc2 | | +--------------+-----+-----------------------+--------+------+-----------+------------------------+--------------------+ | MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | -- cgit v1.3.1 From 15e3324579f3506730b6669730d8243a150d67ff Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Thu, 11 Dec 2025 10:56:18 +0100 Subject: cleanup, add preset Signed-off-by: Zixun LI Signed-off-by: HiFiPhile --- hw/bsp/BoardPresets.json | 66 +++++++++++++++------------------------------ hw/bsp/hpmicro/family.cmake | 4 +-- hw/bsp/hpmicro/family.mk | 2 -- tools/get_deps.py | 2 +- 4 files changed, 24 insertions(+), 50 deletions(-) diff --git a/hw/bsp/BoardPresets.json b/hw/bsp/BoardPresets.json index 5df924138..8829e65f8 100644 --- a/hw/bsp/BoardPresets.json +++ b/hw/bsp/BoardPresets.json @@ -234,6 +234,10 @@ "name": "frdm_mcxn947", "inherits": "default" }, + { + "name": "hpm6750evk2", + "inherits": "default" + }, { "name": "itsybitsy_m0", "inherits": "default" @@ -362,10 +366,6 @@ "name": "metro_m7_1011_sd", "inherits": "default" }, - { - "name": "metro_nrf52840", - "inherits": "default" - }, { "name": "mimxrt1010_evk", "inherits": "default" @@ -518,10 +518,6 @@ "name": "raspberry_pi_pico2", "inherits": "default" }, - { - "name": "raspberry_pi_pico2_riscv", - "inherits": "default" - }, { "name": "raspberry_pi_pico_w", "inherits": "default" @@ -1228,6 +1224,11 @@ "description": "Build preset for the frdm_mcxn947 board", "configurePreset": "frdm_mcxn947" }, + { + "name": "hpm6750evk2", + "description": "Build preset for the hpm6750evk2 board", + "configurePreset": "hpm6750evk2" + }, { "name": "itsybitsy_m0", "description": "Build preset for the itsybitsy_m0 board", @@ -1388,11 +1389,6 @@ "description": "Build preset for the metro_m7_1011_sd board", "configurePreset": "metro_m7_1011_sd" }, - { - "name": "metro_nrf52840", - "description": "Build preset for the metro_nrf52840 board", - "configurePreset": "metro_nrf52840" - }, { "name": "mimxrt1010_evk", "description": "Build preset for the mimxrt1010_evk board", @@ -1583,11 +1579,6 @@ "description": "Build preset for the raspberry_pi_pico2 board", "configurePreset": "raspberry_pi_pico2" }, - { - "name": "raspberry_pi_pico2_riscv", - "description": "Build preset for the raspberry_pi_pico2_riscv board", - "configurePreset": "raspberry_pi_pico2_riscv" - }, { "name": "raspberry_pi_pico_w", "description": "Build preset for the raspberry_pi_pico_w board", @@ -2854,6 +2845,19 @@ } ] }, + { + "name": "hpm6750evk2", + "steps": [ + { + "type": "configure", + "name": "hpm6750evk2" + }, + { + "type": "build", + "name": "hpm6750evk2" + } + ] + }, { "name": "itsybitsy_m0", "steps": [ @@ -3270,19 +3274,6 @@ } ] }, - { - "name": "metro_nrf52840", - "steps": [ - { - "type": "configure", - "name": "metro_nrf52840" - }, - { - "type": "build", - "name": "metro_nrf52840" - } - ] - }, { "name": "mimxrt1010_evk", "steps": [ @@ -3777,19 +3768,6 @@ } ] }, - { - "name": "raspberry_pi_pico2_riscv", - "steps": [ - { - "type": "configure", - "name": "raspberry_pi_pico2_riscv" - }, - { - "type": "build", - "name": "raspberry_pi_pico2_riscv" - } - ] - }, { "name": "raspberry_pi_pico_w", "steps": [ diff --git a/hw/bsp/hpmicro/family.cmake b/hw/bsp/hpmicro/family.cmake index 4500f326f..1289859d3 100644 --- a/hw/bsp/hpmicro/family.cmake +++ b/hw/bsp/hpmicro/family.cmake @@ -2,8 +2,6 @@ include_guard() set(SDK_DIR ${TOP}/hw/mcu/hpmicro/hpm_sdk) -set(CROSS_COMPILE "riscv32-unknown-elf-") - # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) @@ -13,7 +11,7 @@ if (NOT DEFINED CMAKE_SYSTEM_CPU) endif () set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) -set(FAMILY_MCUS HPMIRCO CACHE INTERNAL "") +set(FAMILY_MCUS HPMICRO CACHE INTERNAL "") #------------------------------------ # Startup & Linker script diff --git a/hw/bsp/hpmicro/family.mk b/hw/bsp/hpmicro/family.mk index 9721e2f7d..f8cde55eb 100644 --- a/hw/bsp/hpmicro/family.mk +++ b/hw/bsp/hpmicro/family.mk @@ -1,7 +1,5 @@ SDK_DIR = hw/mcu/hpmicro/hpm_sdk -CROSS_COMPILE ?= riscv32-unknown-elf- - include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 diff --git a/tools/get_deps.py b/tools/get_deps.py index 42ead17ff..9d9e8149f 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -246,7 +246,7 @@ deps_optional = { 'at32f413'], 'hw/mcu/hpmicro/hpm_sdk': ['https://github.com/hpmicro/hpm_sdk', '8d2af741ecc4aaa82d7ee395dc1ce25d7070c3ff', - 'hpm_sdk hpmicro hpm6750 hpm6300 hpm6200 hpm6800 hpm5300 hpm6e00 hpm5e00'], + 'hpmicro'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' -- cgit v1.3.1 From e00c3d1726950fda4833c265d4df0ad9b1b97c00 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 16 Dec 2025 16:23:55 +0700 Subject: enable ci build for hpmicro --- .github/workflows/ci_set_matrix.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 933a8375f..994773f69 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -17,7 +17,7 @@ toolchain_list = [ family_list = { "at32f402_405 at32f403a_407 at32f413 at32f415 at32f423 at32f425 at32f435_437 broadcom_32bit da1469x": ["arm-gcc"], "broadcom_64bit": ["aarch64-gcc"], - "ch32v10x ch32v20x ch32v30x fomu gd32vf103": ["riscv-gcc"], + "ch32v10x ch32v20x ch32v30x fomu gd32vf103 hpmicro": ["riscv-gcc"], "imxrt": ["arm-gcc", "arm-clang"], "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], "lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], -- cgit v1.3.1 From 5a7e5db78770d6fd37992b5812f910c3546f2a72 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Tue, 16 Dec 2025 11:09:16 +0100 Subject: fix riscv toolchain Signed-off-by: Zixun LI --- examples/build_system/make/toolchain/riscv_gcc.mk | 2 +- hw/bsp/family_support.mk | 17 +++++++++++++++-- 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/examples/build_system/make/toolchain/riscv_gcc.mk b/examples/build_system/make/toolchain/riscv_gcc.mk index 843aff38c..b5de12a83 100644 --- a/examples/build_system/make/toolchain/riscv_gcc.mk +++ b/examples/build_system/make/toolchain/riscv_gcc.mk @@ -1,7 +1,7 @@ # makefile for arm gcc toolchain # Can be set by family, default to ARM GCC -CROSS_COMPILE ?= riscv-none-embed- +CROSS_COMPILE ?= riscv-none-elf- CC = $(CROSS_COMPILE)gcc CXX = $(CROSS_COMPILE)g++ diff --git a/hw/bsp/family_support.mk b/hw/bsp/family_support.mk index db410a657..7122a7764 100644 --- a/hw/bsp/family_support.mk +++ b/hw/bsp/family_support.mk @@ -131,8 +131,21 @@ ifdef CPU_CORE include ${TOP}/examples/build_system/make/cpu/$(CPU_CORE).mk endif -# toolchain specific -include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk +# toolchain specific - select based on CPU architecture +ifdef CPU_CORE + ifneq (,$(filter cortex% arm%,$(CPU_CORE))) + # ARM/Cortex architecture + include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk + else ifneq (,$(filter rv%,$(CPU_CORE))) + # RISC-V architecture + include ${TOP}/examples/build_system/make/toolchain/riscv_$(TOOLCHAIN).mk + else + $(error Unsupported CPU_CORE architecture: $(CPU_CORE). Must start with cortex, arm, or rv) + endif +else + # Default to ARM if CPU_CORE not specified + include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk +endif #---------------------- FreeRTOS ----------------------- FREERTOS_SRC = lib/FreeRTOS-Kernel -- cgit v1.3.1 From 412f4d306901f6d373213b972191b2decba330a1 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Tue, 16 Dec 2025 12:14:35 +0100 Subject: update preset Signed-off-by: Zixun LI --- hw/bsp/BoardPresets.json | 66 ++++++++++++++++-------------------------------- 1 file changed, 22 insertions(+), 44 deletions(-) diff --git a/hw/bsp/BoardPresets.json b/hw/bsp/BoardPresets.json index 5df924138..5fbc378d2 100644 --- a/hw/bsp/BoardPresets.json +++ b/hw/bsp/BoardPresets.json @@ -234,6 +234,10 @@ "name": "frdm_mcxn947", "inherits": "default" }, + { + "name": "frdm_rw612", + "inherits": "default" + }, { "name": "itsybitsy_m0", "inherits": "default" @@ -362,10 +366,6 @@ "name": "metro_m7_1011_sd", "inherits": "default" }, - { - "name": "metro_nrf52840", - "inherits": "default" - }, { "name": "mimxrt1010_evk", "inherits": "default" @@ -518,10 +518,6 @@ "name": "raspberry_pi_pico2", "inherits": "default" }, - { - "name": "raspberry_pi_pico2_riscv", - "inherits": "default" - }, { "name": "raspberry_pi_pico_w", "inherits": "default" @@ -1228,6 +1224,11 @@ "description": "Build preset for the frdm_mcxn947 board", "configurePreset": "frdm_mcxn947" }, + { + "name": "frdm_rw612", + "description": "Build preset for the frdm_rw612 board", + "configurePreset": "frdm_rw612" + }, { "name": "itsybitsy_m0", "description": "Build preset for the itsybitsy_m0 board", @@ -1388,11 +1389,6 @@ "description": "Build preset for the metro_m7_1011_sd board", "configurePreset": "metro_m7_1011_sd" }, - { - "name": "metro_nrf52840", - "description": "Build preset for the metro_nrf52840 board", - "configurePreset": "metro_nrf52840" - }, { "name": "mimxrt1010_evk", "description": "Build preset for the mimxrt1010_evk board", @@ -1583,11 +1579,6 @@ "description": "Build preset for the raspberry_pi_pico2 board", "configurePreset": "raspberry_pi_pico2" }, - { - "name": "raspberry_pi_pico2_riscv", - "description": "Build preset for the raspberry_pi_pico2_riscv board", - "configurePreset": "raspberry_pi_pico2_riscv" - }, { "name": "raspberry_pi_pico_w", "description": "Build preset for the raspberry_pi_pico_w board", @@ -2854,6 +2845,19 @@ } ] }, + { + "name": "frdm_rw612", + "steps": [ + { + "type": "configure", + "name": "frdm_rw612" + }, + { + "type": "build", + "name": "frdm_rw612" + } + ] + }, { "name": "itsybitsy_m0", "steps": [ @@ -3270,19 +3274,6 @@ } ] }, - { - "name": "metro_nrf52840", - "steps": [ - { - "type": "configure", - "name": "metro_nrf52840" - }, - { - "type": "build", - "name": "metro_nrf52840" - } - ] - }, { "name": "mimxrt1010_evk", "steps": [ @@ -3777,19 +3768,6 @@ } ] }, - { - "name": "raspberry_pi_pico2_riscv", - "steps": [ - { - "type": "configure", - "name": "raspberry_pi_pico2_riscv" - }, - { - "type": "build", - "name": "raspberry_pi_pico2_riscv" - } - ] - }, { "name": "raspberry_pi_pico_w", "steps": [ -- cgit v1.3.1 From d768735e0cacbd370bf1b8cc023caaef600b7ddc Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Tue, 16 Dec 2025 12:16:55 +0100 Subject: update ci Signed-off-by: Zixun LI --- .github/workflows/ci_set_matrix.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 933a8375f..dfe7e7780 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -21,8 +21,8 @@ family_list = { "imxrt": ["arm-gcc", "arm-clang"], "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], "lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], - "lpc51 lpc54 lpc55": ["arm-gcc", "arm-clang"], - "maxim mcx mm32 msp432e4 tm4c": ["arm-gcc"], + "lpc51 lpc54 lpc55 mcx rw61x": ["arm-gcc", "arm-clang"], + "maxim mm32 msp432e4 tm4c": ["arm-gcc"], "msp430": ["msp430-gcc"], "nrf": ["arm-gcc", "arm-clang"], "nuc100_120 nuc121_125 nuc126 nuc505 xmc4000": ["arm-gcc"], -- cgit v1.3.1 From c130fc07c628a0b2d79f35b743857aa53d79130b Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Tue, 16 Dec 2025 12:29:04 +0100 Subject: fix pre-commit Signed-off-by: Zixun LI --- hw/bsp/rw61x/boards/frdm_rw612/board.cmake | 2 +- hw/bsp/rw61x/boards/frdm_rw612/board.h | 6 ++---- hw/bsp/rw61x/boards/frdm_rw612/clock_config.c | 1 - hw/bsp/rw61x/boards/frdm_rw612/clock_config.h | 1 - hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c | 2 +- hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h | 2 +- hw/bsp/rw61x/family.c | 6 +++--- hw/bsp/rw61x/family.cmake | 4 ++-- hw/bsp/rw61x/family.mk | 4 ++-- src/tusb_option.h | 2 +- 10 files changed, 13 insertions(+), 17 deletions(-) diff --git a/hw/bsp/rw61x/boards/frdm_rw612/board.cmake b/hw/bsp/rw61x/boards/frdm_rw612/board.cmake index 09feb0cab..7d77956fa 100644 --- a/hw/bsp/rw61x/boards/frdm_rw612/board.cmake +++ b/hw/bsp/rw61x/boards/frdm_rw612/board.cmake @@ -27,4 +27,4 @@ function(update_board BOARD_TARGET) target_include_directories(${BOARD_TARGET} PUBLIC ${BOARD_DIR}/flash_config ) -endfunction() \ No newline at end of file +endfunction() diff --git a/hw/bsp/rw61x/boards/frdm_rw612/board.h b/hw/bsp/rw61x/boards/frdm_rw612/board.h index ebb357c29..fd9eec8b6 100644 --- a/hw/bsp/rw61x/boards/frdm_rw612/board.h +++ b/hw/bsp/rw61x/boards/frdm_rw612/board.h @@ -41,8 +41,8 @@ // LED - Green channel of RGB LED #define LED_GPIO BOARD_INITLEDPINS_LED_GREEN_PERIPHERAL #define LED_CLK kCLOCK_HsGpio0 -#define LED_PIN BOARD_INITLEDPINS_LED_GREEN_PIN -#define LED_PORT BOARD_INITLEDPINS_LED_GREEN_PORT +#define LED_PIN BOARD_INITLEDPINS_LED_GREEN_PIN +#define LED_PORT BOARD_INITLEDPINS_LED_GREEN_PORT #define LED_STATE_ON 0 // WAKE button (Dummy, use unused pin @@ -72,5 +72,3 @@ static inline void board_uart_init_clock(void) { #endif #endif - - diff --git a/hw/bsp/rw61x/boards/frdm_rw612/clock_config.c b/hw/bsp/rw61x/boards/frdm_rw612/clock_config.c index 513e40f66..9ad78fe43 100644 --- a/hw/bsp/rw61x/boards/frdm_rw612/clock_config.c +++ b/hw/bsp/rw61x/boards/frdm_rw612/clock_config.c @@ -167,4 +167,3 @@ void BOARD_BootClockRUN(void) /*!< Set SystemCoreClock variable. */ SystemCoreClock = BOARD_BOOTCLOCKRUN_HCLK; } - diff --git a/hw/bsp/rw61x/boards/frdm_rw612/clock_config.h b/hw/bsp/rw61x/boards/frdm_rw612/clock_config.h index 3b467d869..57e3bbb4d 100644 --- a/hw/bsp/rw61x/boards/frdm_rw612/clock_config.h +++ b/hw/bsp/rw61x/boards/frdm_rw612/clock_config.h @@ -113,4 +113,3 @@ void BOARD_BootClockRUN(void); #endif /* _CLOCK_CONFIG_H_ */ - diff --git a/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c b/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c index 49b74b2bb..eba6b4123 100644 --- a/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c +++ b/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.c @@ -53,7 +53,7 @@ BOARD_InitPins: /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitPins - * Description : + * Description : * * END ****************************************************************************************************************/ /* Function assigned for the Cortex-M33 */ diff --git a/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h b/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h index f4c9a9127..c43b304d5 100644 --- a/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h +++ b/hw/bsp/rw61x/boards/frdm_rw612/pin_mux.h @@ -54,7 +54,7 @@ void BOARD_InitBootPins(void); /* @} */ /*! - * @brief + * @brief * */ void BOARD_InitPins(void); /* Function assigned for the Cortex-M33 */ diff --git a/hw/bsp/rw61x/family.c b/hw/bsp/rw61x/family.c index 226956f15..265d5fcc0 100644 --- a/hw/bsp/rw61x/family.c +++ b/hw/bsp/rw61x/family.c @@ -51,7 +51,7 @@ void board_init(void) { // Init button pin, LED pins, SWD pins & UART pins BOARD_InitBootPins(); - + // Init Clocks BOARD_InitBootClocks(); @@ -86,8 +86,8 @@ void board_init(void) { // Enable USB Clock CLOCK_EnableClock(kCLOCK_Usb); - - // Enable USB PHY + + // Enable USB PHY CLOCK_EnableUsbhsPhyClock(); } diff --git a/hw/bsp/rw61x/family.cmake b/hw/bsp/rw61x/family.cmake index 5428b7e50..62233a404 100644 --- a/hw/bsp/rw61x/family.cmake +++ b/hw/bsp/rw61x/family.cmake @@ -81,7 +81,7 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs + --specs=nosys.specs --specs=nano.specs ) endif() @@ -99,4 +99,4 @@ function(family_configure_example TARGET RTOS) # Flashing & Binary Generation family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) -endfunction() \ No newline at end of file +endfunction() diff --git a/hw/bsp/rw61x/family.mk b/hw/bsp/rw61x/family.mk index e715adfa8..08eafddbc 100644 --- a/hw/bsp/rw61x/family.mk +++ b/hw/bsp/rw61x/family.mk @@ -13,7 +13,7 @@ CFLAGS += \ -DSERIAL_PORT_TYPE_UART=1 \ -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED \ -DBOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED \ - + # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration -Wno-error=redundant-decls @@ -35,7 +35,7 @@ SRC_C += \ $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ $(SDK_DIR)/drivers/flexcomm/usart/fsl_usart.c \ $(SDK_DIR)/drivers/flexspi/fsl_flexspi.c \ - + INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ diff --git a/src/tusb_option.h b/src/tusb_option.h index 413bf2a82..caf8c4156 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -199,7 +199,7 @@ // NXP LPC MCX #define OPT_MCU_MCXN9 2300 ///< NXP MCX N9 Series #define OPT_MCU_MCXA15 2301 ///< NXP MCX A15 Series -#define OPT_MCU_RW61X 2302 ///< NXP RW61x Series +#define OPT_MCU_RW61X 2302 ///< NXP RW61x Series // Analog Devices #define OPT_MCU_MAX32690 2400 ///< ADI MAX32690 -- cgit v1.3.1 From cb1873881e3cc51f522978e165748ad7ef7a7b0a Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Tue, 16 Dec 2025 12:40:44 +0100 Subject: fix build Signed-off-by: Zixun LI --- hw/bsp/rw61x/family.cmake | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/hw/bsp/rw61x/family.cmake b/hw/bsp/rw61x/family.cmake index 62233a404..8c332f96e 100644 --- a/hw/bsp/rw61x/family.cmake +++ b/hw/bsp/rw61x/family.cmake @@ -81,10 +81,18 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + -nostartfiles ) - endif() + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") -- cgit v1.3.1 From ce7b15d6f94b1f8efe917f40eb61b8c3a703d0f8 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 16 Dec 2025 21:11:13 +0100 Subject: more fixes Signed-off-by: HiFiPhile --- .github/workflows/ci_set_matrix.py | 4 ++-- README.rst | 4 ++-- hw/bsp/rw61x/family.cmake | 1 - hw/bsp/stm32h5/family.mk | 1 + 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index b682da1a2..c276d5253 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -21,8 +21,8 @@ family_list = { "imxrt": ["arm-gcc", "arm-clang"], "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], "lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], - "lpc51 lpc54 lpc55 mcx rw61x": ["arm-gcc", "arm-clang"], - "maxim mm32 msp432e4 tm4c": ["arm-gcc"], + "lpc51 lpc54 lpc55": ["arm-gcc", "arm-clang"], + "maxim mcx mm32 msp432e4 rw61x tm4c": ["arm-gcc"], "msp430": ["msp430-gcc"], "nrf": ["arm-gcc", "arm-clang"], "nuc100_120 nuc121_125 nuc126 nuc505 xmc4000": ["arm-gcc"], diff --git a/README.rst b/README.rst index 58a9e393e..178a084ce 100644 --- a/README.rst +++ b/README.rst @@ -209,8 +209,8 @@ Supported CPUs | | +-------------------+--------+------+-----------+------------------------+--------------------+ | | | A15 | ✔ | | | ci_fs | | | +---------+-------------------+--------+------+-----------+------------------------+--------------------+ -| | RW61x | ✔ | ✔ | ✔ | ci_hs, ehci | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | RW61x | ✔ | ✔ | ✔ | ci_hs, ehci | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ | Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | +--------------+-----+-----------------------+--------+------+-----------+------------------------+--------------------+ | Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | diff --git a/hw/bsp/rw61x/family.cmake b/hw/bsp/rw61x/family.cmake index 8c332f96e..6782e87e3 100644 --- a/hw/bsp/rw61x/family.cmake +++ b/hw/bsp/rw61x/family.cmake @@ -82,7 +82,6 @@ function(family_configure_example TARGET RTOS) target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" --specs=nosys.specs --specs=nano.specs - -nostartfiles ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${TARGET} PUBLIC diff --git a/hw/bsp/stm32h5/family.mk b/hw/bsp/stm32h5/family.mk index 89a2eddd5..e34bb513e 100644 --- a/hw/bsp/stm32h5/family.mk +++ b/hw/bsp/stm32h5/family.mk @@ -49,6 +49,7 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_i2c.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c INC += \ -- cgit v1.3.1 From 7f4a76151357509f74e4afa67c02d6dd91537a88 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 19 Dec 2025 11:08:49 +0700 Subject: remove the usage snprintf --- src/common/tusb_debug.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index e0e09f5ce..470a8a18b 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -117,12 +117,7 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 } } - // not found return the key value in hex - static char not_found[11]; - if (snprintf(not_found, sizeof(not_found), "0x%08lX", (unsigned long) key) <= 0) { - not_found[0] = 0; - } - return not_found; + return "NotFound"; } #endif // CFG_TUSB_DEBUG -- cgit v1.3.1 From 49a8529dcf8f5b2616640e6f96dcb27e930d1f0d Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 19 Dec 2025 12:24:06 +0700 Subject: clean up cmake, remove family_get_project_name() --- examples/CMakeLists.txt | 7 ++++++- examples/device/audio_4_channel_mic/CMakeLists.txt | 17 +++++++---------- .../audio_4_channel_mic_freertos/CMakeLists.txt | 17 +++++++---------- examples/device/audio_test/CMakeLists.txt | 15 ++++++--------- examples/device/audio_test_freertos/CMakeLists.txt | 15 ++++++--------- .../device/audio_test_multi_rate/CMakeLists.txt | 15 ++++++--------- examples/device/board_test/CMakeLists.txt | 9 +++------ examples/device/cdc_dual_ports/CMakeLists.txt | 15 ++++++--------- examples/device/cdc_msc/CMakeLists.txt | 10 +++------- examples/device/cdc_msc_freertos/CMakeLists.txt | 15 ++++++--------- examples/device/cdc_uac2/CMakeLists.txt | 17 +++++++---------- examples/device/dfu/CMakeLists.txt | 15 ++++++--------- examples/device/dfu_runtime/CMakeLists.txt | 15 ++++++--------- .../device/dynamic_configuration/CMakeLists.txt | 15 ++++++--------- examples/device/hid_boot_interface/CMakeLists.txt | 15 ++++++--------- examples/device/hid_composite/CMakeLists.txt | 15 ++++++--------- .../device/hid_composite_freertos/CMakeLists.txt | 15 ++++++--------- examples/device/hid_generic_inout/CMakeLists.txt | 15 ++++++--------- .../device/hid_multiple_interface/CMakeLists.txt | 15 ++++++--------- examples/device/midi_test/CMakeLists.txt | 15 ++++++--------- examples/device/midi_test_freertos/CMakeLists.txt | 15 ++++++--------- examples/device/msc_dual_lun/CMakeLists.txt | 9 +++------ examples/device/mtp/CMakeLists.txt | 9 +++------ examples/device/net_lwip_webserver/CMakeLists.txt | 22 ++++++++++------------ examples/device/uac2_headset/CMakeLists.txt | 15 ++++++--------- examples/device/uac2_speaker_fb/CMakeLists.txt | 15 ++++++--------- examples/device/usbtmc/CMakeLists.txt | 15 ++++++--------- examples/device/video_capture/CMakeLists.txt | 17 +++++++---------- examples/device/video_capture_2ch/CMakeLists.txt | 17 +++++++---------- examples/device/webusb_serial/CMakeLists.txt | 15 ++++++--------- .../dual/host_hid_to_device_cdc/CMakeLists.txt | 17 +++++++---------- .../dual/host_info_to_device_cdc/CMakeLists.txt | 17 +++++++---------- examples/host/bare_api/CMakeLists.txt | 15 ++++++--------- examples/host/cdc_msc_hid/CMakeLists.txt | 15 ++++++--------- examples/host/cdc_msc_hid_freertos/CMakeLists.txt | 15 ++++++--------- examples/host/device_info/CMakeLists.txt | 15 ++++++--------- examples/host/hid_controller/CMakeLists.txt | 15 ++++++--------- examples/host/midi_rx/CMakeLists.txt | 15 ++++++--------- examples/host/msc_file_explorer/CMakeLists.txt | 15 ++++++--------- examples/typec/power_delivery/CMakeLists.txt | 15 ++++++--------- hw/bsp/family_support.cmake | 5 ----- hw/bsp/rp2040/family.cmake | 2 +- src/common/tusb_debug.h | 9 +++++++++ test/fuzz/device/cdc/CMakeLists.txt | 15 ++++++--------- test/fuzz/device/msc/CMakeLists.txt | 15 ++++++--------- test/fuzz/device/net/CMakeLists.txt | 15 ++++++--------- 46 files changed, 267 insertions(+), 384 deletions(-) diff --git a/examples/CMakeLists.txt b/examples/CMakeLists.txt index b34131c2b..b458c9ce3 100644 --- a/examples/CMakeLists.txt +++ b/examples/CMakeLists.txt @@ -1,6 +1,5 @@ cmake_minimum_required(VERSION 3.20) -#set(CMAKE_EXPORT_COMPILE_COMMANDS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../hw/bsp/family_support.cmake) project(tinyusb_examples C CXX ASM) @@ -27,3 +26,9 @@ add_custom_target(tinyusb_metrics COMMENT "Generating average code size metrics" VERBATIM ) + +#add_custom_command(TARGET tinyusb_metrics POST_BUILD +# COMMAND ${Python3_EXECUTABLE} ${CMAKE_CURRENT_SOURCE_DIR}/../tools/metrics.py compare ${TOP}/cmake-build/cmake-build-${BOARD}/metrics.json ${CMAKE_BINARY_DIR}/metrics.json +# COMMENT "Generating average code size metrics" +# VERBATIM +# ) diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index c8086ae46..5d7ffa4fc 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -2,37 +2,34 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(audio_4_channel_mic C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Add libm for GCC if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_libraries(${PROJECT} PUBLIC m) + target_link_libraries(${PROJECT_NAME} PUBLIC m) endif() # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt b/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt index c50d4fef7..d43a72e58 100644 --- a/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt @@ -2,37 +2,34 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(audio_4_channel_mic_freertos C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Add libm for GCC if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_libraries(${PROJECT} PUBLIC m) + target_link_libraries(${PROJECT_NAME} PUBLIC m) endif() # Configure compilation flags and libraries for the example with FreeRTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} freertos) +family_configure_device_example(${PROJECT_NAME} freertos) diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index 6a7e68c3d..3382530c6 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(audio_test C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/audio_test_freertos/CMakeLists.txt b/examples/device/audio_test_freertos/CMakeLists.txt index 6ce9e72fe..71d65eccc 100644 --- a/examples/device/audio_test_freertos/CMakeLists.txt +++ b/examples/device/audio_test_freertos/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(audio_test_freertos C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example with FreeRTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} freertos) +family_configure_device_example(${PROJECT_NAME} freertos) diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt index 6a7e68c3d..c17831cda 100644 --- a/examples/device/audio_test_multi_rate/CMakeLists.txt +++ b/examples/device/audio_test_multi_rate/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(audio_test_multi_rate C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index 9a604a732..bd7b8e0ca 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -2,13 +2,10 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(board_test C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") @@ -18,7 +15,7 @@ endif() if (RTOS STREQUAL zephyr) set(EXE_NAME app) else() - set(EXE_NAME ${PROJECT}) + set(EXE_NAME ${PROJECT_NAME}) add_executable(${EXE_NAME}) endif() diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index 6a7e68c3d..697906b83 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(cdc_dual_ports C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index b07f92342..293b497a7 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,15 +1,11 @@ cmake_minimum_required(VERSION 3.20) -#set_property(GLOBAL PROPERTY USE_FOLDERS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(cdc_msc C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") @@ -19,7 +15,7 @@ endif() if (RTOS STREQUAL zephyr) set(EXE_NAME app) else() - set(EXE_NAME ${PROJECT}) + set(EXE_NAME ${PROJECT_NAME}) add_executable(${EXE_NAME}) endif() diff --git a/examples/device/cdc_msc_freertos/CMakeLists.txt b/examples/device/cdc_msc_freertos/CMakeLists.txt index f7636a07a..429000427 100644 --- a/examples/device/cdc_msc_freertos/CMakeLists.txt +++ b/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -2,33 +2,30 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(cdc_msc_freertos C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example with FreeRTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} freertos) +family_configure_device_example(${PROJECT_NAME} freertos) diff --git a/examples/device/cdc_uac2/CMakeLists.txt b/examples/device/cdc_uac2/CMakeLists.txt index c8c797637..fb14dc184 100644 --- a/examples/device/cdc_uac2/CMakeLists.txt +++ b/examples/device/cdc_uac2/CMakeLists.txt @@ -2,23 +2,20 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(cdc_uac2 C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/uac2_app.c @@ -26,13 +23,13 @@ target_sources(${PROJECT} PUBLIC ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) # Uncomment me to enable UART based debugging -# pico_enable_stdio_uart(${PROJECT} 1) +# pico_enable_stdio_uart(${PROJECT_NAME} 1) diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index 3da8ee3df..61d169460 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(dfu C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index 3da8ee3df..8f6df9f75 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(dfu_runtime C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index 8a62d6ba2..4a1b67a69 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(dynamic_configuration C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt index 3da8ee3df..2fee46517 100644 --- a/examples/device/hid_boot_interface/CMakeLists.txt +++ b/examples/device/hid_boot_interface/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(hid_boot_interface C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index 3da8ee3df..f1ddbd125 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(hid_composite C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/hid_composite_freertos/CMakeLists.txt b/examples/device/hid_composite_freertos/CMakeLists.txt index 6ce9e72fe..b52373011 100644 --- a/examples/device/hid_composite_freertos/CMakeLists.txt +++ b/examples/device/hid_composite_freertos/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(hid_composite_freertos C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example with FreeRTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} freertos) +family_configure_device_example(${PROJECT_NAME} freertos) diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index 3da8ee3df..b363c161b 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(hid_generic_inout C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index 3da8ee3df..f4a9895d5 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(hid_multiple_interface C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index 6a7e68c3d..09fbf20f0 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(midi_test C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/midi_test_freertos/CMakeLists.txt b/examples/device/midi_test_freertos/CMakeLists.txt index 6ce9e72fe..7e5d3e89e 100644 --- a/examples/device/midi_test_freertos/CMakeLists.txt +++ b/examples/device/midi_test_freertos/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(midi_test_freertos C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example with FreeRTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} freertos) +family_configure_device_example(${PROJECT_NAME} freertos) diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index 3955bfb49..72a55eebc 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -2,13 +2,10 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(msc_dual_lun C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") @@ -18,7 +15,7 @@ endif() if (RTOS STREQUAL zephyr) set(EXE_NAME app) else() - set(EXE_NAME ${PROJECT}) + set(EXE_NAME ${PROJECT_NAME}) add_executable(${EXE_NAME}) endif() diff --git a/examples/device/mtp/CMakeLists.txt b/examples/device/mtp/CMakeLists.txt index e91eb8fd9..a9f2f1a90 100644 --- a/examples/device/mtp/CMakeLists.txt +++ b/examples/device/mtp/CMakeLists.txt @@ -2,13 +2,10 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(mtp C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") @@ -18,7 +15,7 @@ endif() if (RTOS STREQUAL zephyr) set(EXE_NAME app) else() - set(EXE_NAME ${PROJECT}) + set(EXE_NAME ${PROJECT_NAME}) add_executable(${EXE_NAME}) endif() diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 87b92f4dc..9c4349d24 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -2,8 +2,6 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_LIST_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) # Prefer the tinyusb lwip set(LWIP ${TOP}/lib/lwip) @@ -14,25 +12,25 @@ if (NOT EXISTS ${LWIP}/src) endif() if (NOT EXISTS ${LWIP}/src) - family_example_missing_dependency(${PROJECT} "lib/lwip") + family_example_missing_dependency(${PROJECT_NAME} "lib/lwip") return() endif() -project(${PROJECT} C CXX ASM) +project(net_lwip_webserver C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_LIST_DIR}/src/main.c ${CMAKE_CURRENT_LIST_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_LIST_DIR}/src ${LWIP}/src/include ${LWIP}/src/include/ipv4 @@ -41,14 +39,14 @@ target_include_directories(${PROJECT} PUBLIC ) # lib/networking sources -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${TOP}/lib/networking/dhserver.c ${TOP}/lib/networking/dnserver.c ${TOP}/lib/networking/rndis_reports.c ) # lwip sources -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${LWIP}/src/core/altcp.c ${LWIP}/src/core/altcp_alloc.c ${LWIP}/src/core/altcp_tcp.c @@ -86,7 +84,7 @@ target_sources(${PROJECT} PUBLIC # due to warnings from other net source, we need to prevent error from some of the warnings options if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_compile_options(${PROJECT} PUBLIC + target_compile_options(${PROJECT_NAME} PUBLIC -Wno-error=null-dereference -Wno-error=conversion -Wno-error=sign-conversion @@ -98,4 +96,4 @@ endif () # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index ced98a909..52b88aac0 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(uac2_headset C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/uac2_speaker_fb/CMakeLists.txt b/examples/device/uac2_speaker_fb/CMakeLists.txt index ced98a909..cddbf6a31 100644 --- a/examples/device/uac2_speaker_fb/CMakeLists.txt +++ b/examples/device/uac2_speaker_fb/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(uac2_speaker_fb C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index d2deb72d5..6181c303b 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -2,33 +2,30 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(usbtmc C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usbtmc_app.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index 90788fa60..1f9b851ff 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -2,38 +2,35 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(video_capture C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) if (FORCE_READONLY) -target_compile_definitions(${PROJECT} PRIVATE +target_compile_definitions(${PROJECT_NAME} PRIVATE CFG_EXAMPLE_VIDEO_READONLY ) endif() # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/video_capture_2ch/CMakeLists.txt b/examples/device/video_capture_2ch/CMakeLists.txt index 90788fa60..cb1785d1f 100644 --- a/examples/device/video_capture_2ch/CMakeLists.txt +++ b/examples/device/video_capture_2ch/CMakeLists.txt @@ -2,38 +2,35 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(video_capture_2ch C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) if (FORCE_READONLY) -target_compile_definitions(${PROJECT} PRIVATE +target_compile_definitions(${PROJECT_NAME} PRIVATE CFG_EXAMPLE_VIDEO_READONLY ) endif() # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index ced98a909..3b214e7c9 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(webusb_serial C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index 6ae5b5766..38c678cf2 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -2,34 +2,31 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(host_hid_to_device_cdc C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_dual_usb_example(${PROJECT} noos) +family_configure_dual_usb_example(${PROJECT_NAME} noos) # due to warnings from Pico-PIO-USB if (FAMILY STREQUAL rp2040) - target_compile_options(${PROJECT} PUBLIC + target_compile_options(${PROJECT_NAME} PUBLIC -Wno-error=shadow -Wno-error=cast-align -Wno-error=cast-qual diff --git a/examples/dual/host_info_to_device_cdc/CMakeLists.txt b/examples/dual/host_info_to_device_cdc/CMakeLists.txt index ad3c5ddf0..87b5336f1 100644 --- a/examples/dual/host_info_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_info_to_device_cdc/CMakeLists.txt @@ -2,39 +2,36 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(host_info_to_device_cdc C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_dual_usb_example(${PROJECT} ${RTOS}) +family_configure_dual_usb_example(${PROJECT_NAME} ${RTOS}) # due to warnings from Pico-PIO-USB if (FAMILY STREQUAL rp2040) - target_compile_options(${PROJECT} PUBLIC + target_compile_options(${PROJECT_NAME} PUBLIC -Wno-error=shadow -Wno-error=cast-align -Wno-error=cast-qual diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 0efe84b60..4993f93b9 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(bare_api C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT} noos) +family_configure_host_example(${PROJECT_NAME} noos) diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index e8928cda5..3098c37fa 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -2,23 +2,20 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(cdc_msc_hid C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c @@ -26,10 +23,10 @@ target_sources(${PROJECT} PUBLIC ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT} noos) +family_configure_host_example(${PROJECT_NAME} noos) diff --git a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt index 78b2784fe..3ceefb3f4 100644 --- a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt +++ b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt @@ -2,23 +2,20 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(cdc_msc_hid_freertos C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c @@ -26,10 +23,10 @@ target_sources(${PROJECT} PUBLIC ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT} freertos) +family_configure_host_example(${PROJECT_NAME} freertos) diff --git a/examples/host/device_info/CMakeLists.txt b/examples/host/device_info/CMakeLists.txt index 33953233d..9b96a8af8 100644 --- a/examples/host/device_info/CMakeLists.txt +++ b/examples/host/device_info/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(device_info C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT} noos) +family_configure_host_example(${PROJECT_NAME} noos) diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index fb5faf210..287e9fb7f 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -2,32 +2,29 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(hid_controller C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT} noos) +family_configure_host_example(${PROJECT_NAME} noos) diff --git a/examples/host/midi_rx/CMakeLists.txt b/examples/host/midi_rx/CMakeLists.txt index 33953233d..62bb89e95 100644 --- a/examples/host/midi_rx/CMakeLists.txt +++ b/examples/host/midi_rx/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(midi_rx C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT} noos) +family_configure_host_example(${PROJECT_NAME} noos) diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index e9c15b7c1..21703030c 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -2,23 +2,20 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(msc_file_explorer C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c ${TOP}/lib/fatfs/source/ff.c @@ -34,7 +31,7 @@ if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") endif () # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ${TOP}/lib/fatfs/source ${TOP}/lib/embedded-cli @@ -42,4 +39,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT} noos) +family_configure_host_example(${PROJECT_NAME} noos) diff --git a/examples/typec/power_delivery/CMakeLists.txt b/examples/typec/power_delivery/CMakeLists.txt index 837b4996a..728221eb4 100644 --- a/examples/typec/power_delivery/CMakeLists.txt +++ b/examples/typec/power_delivery/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(power_delivery C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 5eadcdaa9..baa8422fe 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -207,11 +207,6 @@ function(family_add_subdirectory DIR) endif() endfunction() -function(family_get_project_name OUTPUT_NAME DIR) - get_filename_component(SHORT_NAME ${DIR} NAME) - set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${SHORT_NAME} PARENT_SCOPE) -endfunction() - function(family_initialize_project PROJECT DIR) # set output suffix to .elf (skip espressif and rp2040) if(NOT FAMILY STREQUAL "espressif" AND NOT FAMILY STREQUAL "rp2040") diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 390d6072c..1602e35eb 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -296,7 +296,7 @@ function(family_configure_host_example TARGET RTOS) # Pico-PIO-USB does not compile with all pico-sdk supported compilers, so check before enabling it is_compiler_supported_by_pico_pio_usb(PICO_PIO_USB_COMPILER_SUPPORTED) if (PICO_PIO_USB_COMPILER_SUPPORTED) - family_add_pico_pio_usb(${PROJECT}) + family_add_pico_pio_usb(${TARGET}) endif() endif() diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 470a8a18b..ba5b4afd1 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -117,7 +117,16 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 } } + #ifndef CFG_TUSB_DEBUG_PRINTF + // not found return the key value in hex if no custom printf is defined + static char not_found[11]; + if (snprintf(not_found, sizeof(not_found), "0x%08lX", (unsigned long)key) <= 0) { + not_found[0] = 0; + } + return not_found; + #else return "NotFound"; + #endif } #endif // CFG_TUSB_DEBUG diff --git a/test/fuzz/device/cdc/CMakeLists.txt b/test/fuzz/device/cdc/CMakeLists.txt index c60f292b9..85094cfb1 100644 --- a/test/fuzz/device/cdc/CMakeLists.txt +++ b/test/fuzz/device/cdc/CMakeLists.txt @@ -2,28 +2,25 @@ cmake_minimum_required(VERSION 3.5) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT}) +project(cdc) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/test/fuzz/device/msc/CMakeLists.txt b/test/fuzz/device/msc/CMakeLists.txt index 8bff217cb..6eb6c8c46 100644 --- a/test/fuzz/device/msc/CMakeLists.txt +++ b/test/fuzz/device/msc/CMakeLists.txt @@ -2,28 +2,25 @@ cmake_minimum_required(VERSION 3.5) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT}) +project(msc) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/test/fuzz/device/net/CMakeLists.txt b/test/fuzz/device/net/CMakeLists.txt index 8bff217cb..84e92ad2f 100644 --- a/test/fuzz/device/net/CMakeLists.txt +++ b/test/fuzz/device/net/CMakeLists.txt @@ -2,28 +2,25 @@ cmake_minimum_required(VERSION 3.5) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT}) +project(net) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) -- cgit v1.3.1 From 5c8d5fbcc0e88c3ea40936f88c7912862b652d6c Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 20 Dec 2025 23:08:40 +0700 Subject: SCB_EnableDCache() is required for rt1011 --- hw/bsp/imxrt/family.c | 19 +++++++------------ hw/bsp/imxrt/family.cmake | 28 +++++++++------------------- hw/bsp/imxrt/family.mk | 1 + 3 files changed, 17 insertions(+), 31 deletions(-) diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 18833da80..d54b41bdb 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -107,6 +107,13 @@ static void init_usb_phy(uint8_t usb_id) { } void board_init(void) { +// make sure the dcache is on. +#if defined(__DCACHE_PRESENT) && __DCACHE_PRESENT + if (SCB_CCR_DC_Msk != (SCB_CCR_DC_Msk & SCB->CCR)) { + SCB_EnableDCache(); + } +#endif + BOARD_InitBootPins(); BOARD_BootClockRUN(); SystemCoreClockUpdate(); @@ -237,21 +244,9 @@ uint32_t board_millis(void) { } #endif - -#ifndef __ICCARM__ -// Implement _start() since we use linker flag '-nostartfiles'. -// Requires defined __STARTUP_CLEAR_BSS, -extern int main(void); -TU_ATTR_UNUSED void _start(void) { - // called by startup code - main(); - while (1) {} -} - #ifdef __clang__ void _exit(int __status) { (void) __status; while (1) {} } #endif -#endif diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 11cc00983..d946b591d 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -44,7 +44,6 @@ function(family_add_board BOARD_TARGET) ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c ${SDK_DIR}/drivers/ocotp/fsl_ocotp.c ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT_WITH_CORE}.c - ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c ) @@ -56,11 +55,6 @@ function(family_add_board BOARD_TARGET) endif() endforeach() - target_compile_definitions(${BOARD_TARGET} PUBLIC - __STARTUP_CLEAR_BSS - [=[CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable")))]=] - ) - if (NOT M4 STREQUAL "1") target_compile_definitions(${BOARD_TARGET} PUBLIC XIP_EXTERNAL_FLASH=1 @@ -74,7 +68,6 @@ function(family_add_board BOARD_TARGET) ${CMSIS_DIR}/CMSIS/Core/Include ${SDK_DIR}/devices/${MCU_VARIANT} ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - #${SDK_DIR}/drivers/adc_12b1msps_sar ${SDK_DIR}/drivers/common ${SDK_DIR}/drivers/igpio ${SDK_DIR}/drivers/lpspi @@ -92,12 +85,13 @@ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX) - target_sources(${TARGET} PUBLIC + target_sources(${TARGET} PRIVATE ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c ${TOP}/src/portable/ehci/ehci.c + ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC @@ -105,26 +99,22 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) + target_compile_definitions(${TARGET} PUBLIC + __START=main # required with -nostartfiles + __STARTUP_CLEAR_BSS + [=[CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable")))]=] + ) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" -nostartfiles --specs=nosys.specs --specs=nano.specs - # force linker to look for these symbols - -Wl,-uimage_vector_table - -Wl,-ug_boot_data ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -Wl,-uimage_vector_table - -Wl,-ug_boot_data - ) + target_link_options(${TARGET} PRIVATE "LINKER:--script=${LD_FILE_GNU}") elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) + target_link_options(${TARGET} PRIVATE "LINKER:--config=${LD_FILE_IAR}") endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index 353f64e57..42000671d 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -8,6 +8,7 @@ MCU_VARIANT_WITH_CORE = ${MCU_VARIANT}${MCU_CORE} MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) CFLAGS += \ + -D__START=main \ -D__STARTUP_CLEAR_BSS \ -DCFG_TUSB_MCU=OPT_MCU_MIMXRT1XXX \ -DCFG_TUSB_MEM_SECTION='__attribute__((section("NonCacheable")))' \ -- cgit v1.3.1 From 185757ed413fc7bdc65cf494a6079cfed049f98e Mon Sep 17 00:00:00 2001 From: James Smith <{ID}+{username}@users.noreply.github.com> Date: Sat, 20 Dec 2025 13:27:29 -0700 Subject: Added tud_vendor_write_clear() which forcefully clears TX buffer --- examples/device/webusb_serial/src/main.c | 1 + src/class/vendor/vendor_device.c | 6 ++++++ src/class/vendor/vendor_device.h | 7 +++++++ src/common/tusb_fifo.c | 16 ++++++++++++++++ src/common/tusb_fifo.h | 1 + src/common/tusb_private.h | 4 ++++ 6 files changed, 35 insertions(+) diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 50794bdba..155768b76 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -196,6 +196,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ tud_vendor_write_str("\r\nWebUSB interface connected\r\n"); tud_vendor_write_flush(); } else { + tud_vendor_write_clear(); // anything left in the buffer is now thrown out blink_interval_ms = BLINK_MOUNTED; } diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index 9972911e0..ced3c0d71 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -160,6 +160,12 @@ uint32_t tud_vendor_n_write_available(uint8_t idx) { vendord_interface_t *p_itf = &_vendord_itf[idx]; return tu_edpt_stream_write_available(&p_itf->stream.tx); } + +uint32_t tud_vendor_n_write_clear(uint8_t idx) { + TU_VERIFY(idx < CFG_TUD_VENDOR, 0); + vendord_interface_t *p_itf = &_vendord_itf[idx]; + return tu_edpt_stream_count_and_clear(&p_itf->stream.tx); +} #endif //--------------------------------------------------------------------+ diff --git a/src/class/vendor/vendor_device.h b/src/class/vendor/vendor_device.h index d59c885d2..878d7aee0 100644 --- a/src/class/vendor/vendor_device.h +++ b/src/class/vendor/vendor_device.h @@ -91,6 +91,9 @@ uint32_t tud_vendor_n_write_flush(uint8_t idx); // Return number of bytes available for writing in TX FIFO uint32_t tud_vendor_n_write_available(uint8_t idx); + +// Clear the write buffer and return the number of elements cleared +uint32_t tud_vendor_n_write_clear(uint8_t idx); #endif // Write a null-terminated string to TX FIFO @@ -148,6 +151,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_write_flush(void) { TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_write_available(void) { return tud_vendor_n_write_available(0); } + +TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_write_clear(void) { + return tud_vendor_n_write_clear(0); +} #endif // backward compatible diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index e97b6ccce..28086be0b 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -95,6 +95,22 @@ void tu_fifo_clear(tu_fifo_t *f) { ff_unlock(f->mutex_rd); } +// synchronously count then clear fifo, returning the count +uint16_t tu_fifo_count_and_clear(tu_fifo_t *f) { + ff_lock(f->mutex_wr); + ff_lock(f->mutex_rd); + + uint16_t cnt = tu_fifo_count(f); + + f->rd_idx = 0; + f->wr_idx = 0; + + ff_unlock(f->mutex_wr); + ff_unlock(f->mutex_rd); + + return cnt; +} + // Change the fifo overwritable mode void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { if (f->overwritable == overwritable) { diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 2e2a0db6f..75eeded01 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -159,6 +159,7 @@ typedef enum { bool tu_fifo_config(tu_fifo_t *f, void *buffer, uint16_t depth, uint16_t item_size, bool overwritable); void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable); void tu_fifo_clear(tu_fifo_t *f); +uint16_t tu_fifo_count_and_clear(tu_fifo_t *f); #if OSAL_MUTEX_REQUIRED TU_ATTR_ALWAYS_INLINE static inline diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 10e12c2af..0c1709d49 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -144,6 +144,10 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_clear(tu_edpt_stream_t * tu_fifo_clear(&s->ff); } +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_edpt_stream_count_and_clear(tu_edpt_stream_t *s) { + return tu_fifo_count_and_clear(&s->ff); +} + TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_empty(tu_edpt_stream_t *s) { return tu_fifo_empty(&s->ff); } -- cgit v1.3.1 From b7463bad87456303c0b68bda120a300b343f45fa Mon Sep 17 00:00:00 2001 From: James Smith <{ID}+{username}@users.noreply.github.com> Date: Sun, 21 Dec 2025 06:41:57 -0700 Subject: Removed tu_fifo_count_and_clear --- src/class/vendor/vendor_device.c | 4 +++- src/common/tusb_fifo.c | 16 ---------------- src/common/tusb_fifo.h | 1 - src/common/tusb_private.h | 4 ---- 4 files changed, 3 insertions(+), 22 deletions(-) diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index ced3c0d71..762cbeebc 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -164,7 +164,9 @@ uint32_t tud_vendor_n_write_available(uint8_t idx) { uint32_t tud_vendor_n_write_clear(uint8_t idx) { TU_VERIFY(idx < CFG_TUD_VENDOR, 0); vendord_interface_t *p_itf = &_vendord_itf[idx]; - return tu_edpt_stream_count_and_clear(&p_itf->stream.tx); + uint32_t cnt = tu_edpt_stream_read_available(&p_itf->stream.tx); + tu_edpt_stream_clear(&p_itf->stream.tx); + return cnt; } #endif diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 28086be0b..e97b6ccce 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -95,22 +95,6 @@ void tu_fifo_clear(tu_fifo_t *f) { ff_unlock(f->mutex_rd); } -// synchronously count then clear fifo, returning the count -uint16_t tu_fifo_count_and_clear(tu_fifo_t *f) { - ff_lock(f->mutex_wr); - ff_lock(f->mutex_rd); - - uint16_t cnt = tu_fifo_count(f); - - f->rd_idx = 0; - f->wr_idx = 0; - - ff_unlock(f->mutex_wr); - ff_unlock(f->mutex_rd); - - return cnt; -} - // Change the fifo overwritable mode void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { if (f->overwritable == overwritable) { diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 75eeded01..2e2a0db6f 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -159,7 +159,6 @@ typedef enum { bool tu_fifo_config(tu_fifo_t *f, void *buffer, uint16_t depth, uint16_t item_size, bool overwritable); void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable); void tu_fifo_clear(tu_fifo_t *f); -uint16_t tu_fifo_count_and_clear(tu_fifo_t *f); #if OSAL_MUTEX_REQUIRED TU_ATTR_ALWAYS_INLINE static inline diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 0c1709d49..10e12c2af 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -144,10 +144,6 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_clear(tu_edpt_stream_t * tu_fifo_clear(&s->ff); } -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_edpt_stream_count_and_clear(tu_edpt_stream_t *s) { - return tu_fifo_count_and_clear(&s->ff); -} - TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_empty(tu_edpt_stream_t *s) { return tu_fifo_empty(&s->ff); } -- cgit v1.3.1 From b53739dee47ae21a21eaa74e9ae6d17d0def32c8 Mon Sep 17 00:00:00 2001 From: James Smith <{ID}+{username}@users.noreply.github.com> Date: Sun, 21 Dec 2025 09:06:05 -0700 Subject: Change return of tud_vendor_n_write_clear from uint32_t to bool --- src/class/vendor/vendor_device.c | 5 ++--- src/class/vendor/vendor_device.h | 6 +++--- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index 762cbeebc..b8e6fec6f 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -161,12 +161,11 @@ uint32_t tud_vendor_n_write_available(uint8_t idx) { return tu_edpt_stream_write_available(&p_itf->stream.tx); } -uint32_t tud_vendor_n_write_clear(uint8_t idx) { +bool tud_vendor_n_write_clear(uint8_t idx) { TU_VERIFY(idx < CFG_TUD_VENDOR, 0); vendord_interface_t *p_itf = &_vendord_itf[idx]; - uint32_t cnt = tu_edpt_stream_read_available(&p_itf->stream.tx); tu_edpt_stream_clear(&p_itf->stream.tx); - return cnt; + return true; } #endif diff --git a/src/class/vendor/vendor_device.h b/src/class/vendor/vendor_device.h index 878d7aee0..c3de4c49d 100644 --- a/src/class/vendor/vendor_device.h +++ b/src/class/vendor/vendor_device.h @@ -92,8 +92,8 @@ uint32_t tud_vendor_n_write_flush(uint8_t idx); // Return number of bytes available for writing in TX FIFO uint32_t tud_vendor_n_write_available(uint8_t idx); -// Clear the write buffer and return the number of elements cleared -uint32_t tud_vendor_n_write_clear(uint8_t idx); +// Clear the transmit FIFO +bool tud_vendor_n_write_clear(uint8_t idx); #endif // Write a null-terminated string to TX FIFO @@ -152,7 +152,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_write_available(void) { return tud_vendor_n_write_available(0); } -TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_write_clear(void) { +TU_ATTR_ALWAYS_INLINE static inline bool tud_vendor_write_clear(void) { return tud_vendor_n_write_clear(0); } #endif -- cgit v1.3.1 From 003d6ebac75e3b56814a68a957fc1ec52c98006e Mon Sep 17 00:00:00 2001 From: Aleksei Musin Date: Mon, 22 Dec 2025 15:16:09 +0400 Subject: ThreadX OSAL header is added. Docs are updated. --- docs/faq.rst | 2 +- src/osal/osal.h | 2 + src/osal/osal_threadx.h | 210 ++++++++++++++++++++++++++++++++++++++++++++++++ src/tusb_option.h | 1 + 4 files changed, 214 insertions(+), 1 deletion(-) create mode 100644 src/osal/osal_threadx.h diff --git a/docs/faq.rst b/docs/faq.rst index a5fe09495..97e8e72ff 100644 --- a/docs/faq.rst +++ b/docs/faq.rst @@ -15,7 +15,7 @@ Yes, TinyUSB is released under the MIT license, allowing commercial use with min **Q: Does TinyUSB require an RTOS?** -No, TinyUSB works in bare metal environments. It also supports FreeRTOS, RT-Thread, and Mynewt. +No, TinyUSB works in bare metal environments. It also supports FreeRTOS, RT-Thread, ThreadX, and Mynewt. **Q: How much memory does TinyUSB use?** diff --git a/src/osal/osal.h b/src/osal/osal.h index 44521620f..7311fc962 100644 --- a/src/osal/osal.h +++ b/src/osal/osal.h @@ -65,6 +65,8 @@ typedef void (*osal_task_func_t)(void* param); #include "osal_rtx4.h" #elif CFG_TUSB_OS == OPT_OS_ZEPHYR #include "osal_zephyr.h" +#elif CFG_TUSB_OS == OPT_OS_THREADX + #include "osal_threadx.h" #elif CFG_TUSB_OS == OPT_OS_CUSTOM #include "tusb_os_custom.h" // implemented by application #else diff --git a/src/osal/osal_threadx.h b/src/osal/osal_threadx.h new file mode 100644 index 000000000..32c1c62c2 --- /dev/null +++ b/src/osal/osal_threadx.h @@ -0,0 +1,210 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef TUSB_OSAL_THREADX_H_ +#define TUSB_OSAL_THREADX_H_ + +// ThreadX Headers +#include "tx_api.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* +typedef struct +{ + uint16_t depth; + uint16_t item_sz; + void* buf; + char const* name; + TX_QUEUE *queue; + +} osal_queue_def_t; + +typedef TX_QUEUE * osal_queue_t; +*/ +//--------------------------------------------------------------------+ +// TASK API +//--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE static inline uint32_t _osal_ms2tick(uint32_t msec) { + if ( msec == TX_WAIT_FOREVER ) return TX_WAIT_FOREVER; + if ( msec == 0 ) return 0; + + uint32_t ticks = msec * TX_TIMER_TICKS_PER_SECOND / 1000; + + // TX_TIMER_TICKS_PER_SECOND is less than 1000 and 1 tick > 1 ms + // we still need to delay at least 1 tick + if ( ticks == 0 ) ticks = 1; + + return ticks; +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { + tx_thread_sleep(_osal_ms2tick(msec)); +} + +//--------------------------------------------------------------------+ +// Spinlock API +//--------------------------------------------------------------------+ +//--------------------------------------------------------------------+ +// Spinlock API +//--------------------------------------------------------------------+ +typedef struct { + void (* interrupt_set)(bool); +} osal_spinlock_t; + +// For SMP, spinlock must be locked by hardware, cannot just use interrupt +#define OSAL_SPINLOCK_DEF(_name, _int_set) \ + osal_spinlock_t _name = { .interrupt_set = _int_set } + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { + (void) ctx; +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { +// if (!in_isr) { +// ctx->interrupt_set(false); +// } +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { +// if (!in_isr) { +// ctx->interrupt_set(true); +// } +} + + +//--------------------------------------------------------------------+ +// Binary Semaphore API +//--------------------------------------------------------------------+ +typedef TX_SEMAPHORE osal_semaphore_def_t, * osal_semaphore_t; + +/* +TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t *semdef) { + tx_semaphore_create(semdef->semaphore, semdef->name, 0); + return semdef; +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t semd_hdl) { + (void) semd_hdl; + return true; // nothing to do +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { + (void) in_isr; + tx_semaphore_put(sem_hdl); + return true; +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { + return TX_SUCCESS == tx_semaphore_get(sem_hdl, _osal_ms2tick(msec)); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t sem_hdl) { +} +*/ +//--------------------------------------------------------------------+ +// MUTEX API +//--------------------------------------------------------------------+ +typedef TX_MUTEX osal_mutex_def_t, *osal_mutex_t; + +TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t *mdef) { + if (TX_SUCCESS == tx_mutex_create(mdef, mdef->tx_mutex_name, TX_NO_INHERIT)) { + return mdef; + } else { + return NULL; + } +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_delete(osal_mutex_t mutex_hdl) { + (void) mutex_hdl; + return true; // nothing to do +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_lock(osal_mutex_t mutex_hdl, uint32_t msec) { + return TX_SUCCESS == tx_mutex_get(mutex_hdl, _osal_ms2tick(msec)); +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl) { + return TX_SUCCESS == tx_mutex_put(mutex_hdl); +} + +//--------------------------------------------------------------------+ +// QUEUE API +//--------------------------------------------------------------------+ + +typedef TX_QUEUE osal_queue_def_t, * osal_queue_t; + +// _int_set is not used with an RTOS _usbd_qdef + +#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ +static _type _name##_buf[_depth]; \ +osal_queue_def_t _name = { \ + .tx_queue_name = #_name, \ + .tx_queue_message_size = (sizeof(_type) + 3) / 4, \ + .tx_queue_capacity = _depth, \ + .tx_queue_start = _name##_buf } + + +// Event queue: usbd_int_set() is used as mutex in OS NONE config +/* +OSAL_QUEUE_DEF(usbd_int_set, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t); +static osal_queue_t _usbd_q; +*/ + + +TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { + return TX_SUCCESS == + tx_queue_create(qdef, qdef->tx_queue_name, qdef->tx_queue_message_size, qdef->tx_queue_start, qdef->tx_queue_capacity * qdef->tx_queue_message_size * 4) + ? qdef : 0; +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_delete(osal_queue_t qhdl) { + (void) qhdl; + return true; +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec) { + return 0 == tx_queue_receive(qhdl, data, _osal_ms2tick(msec)); +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void *data, bool in_isr) { + return 0 == tx_queue_send(qhdl, data, in_isr ? TX_NO_WAIT : TX_WAIT_FOREVER); +} + +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_empty(osal_queue_t qhdl) { + ULONG enqueued; + tx_queue_info_get(qhdl, 0, &enqueued, 0, 0, 0, 0); + return enqueued == 0; +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/src/tusb_option.h b/src/tusb_option.h index 64fe899db..08bf0ebc5 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -237,6 +237,7 @@ #define OPT_OS_RTTHREAD 6 ///< RT-Thread #define OPT_OS_RTX4 7 ///< Keil RTX 4 #define OPT_OS_ZEPHYR 8 ///< Zephyr +#define OPT_OS_THREADX 9 ///< ThreadX //--------------------------------------------------------------------+ // Mode and Speed -- cgit v1.3.1 From e574fbf723998bbbe8c9caf9bebfc36dc85e25b2 Mon Sep 17 00:00:00 2001 From: Aleksei Musin Date: Mon, 22 Dec 2025 15:33:12 +0400 Subject: Remove trailing whitespace --- src/osal/osal_threadx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/osal/osal_threadx.h b/src/osal/osal_threadx.h index 32c1c62c2..681aff772 100644 --- a/src/osal/osal_threadx.h +++ b/src/osal/osal_threadx.h @@ -202,7 +202,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_empty(osal_queue_t qhdl) { tx_queue_info_get(qhdl, 0, &enqueued, 0, 0, 0, 0); return enqueued == 0; } - + #ifdef __cplusplus } #endif -- cgit v1.3.1 From aa183a50fc4bd7ca0c50f97477fe15bcd7020528 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 22 Dec 2025 21:11:32 +0100 Subject: limit fifo read size to ep_bufsize regardless ep_buf is used or not Signed-off-by: HiFiPhile --- src/tusb.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/src/tusb.c b/src/tusb.c index 8117c3e3e..9c5237d9f 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -485,9 +485,7 @@ uint32_t tu_edpt_stream_read_xfer(tu_edpt_stream_t *s) { if (available >= s->mps) { // multiple of packet size limit by ep bufsize uint16_t count = (uint16_t) (available & ~(s->mps - 1)); - if (s->ep_buf != NULL) { - count = tu_min16(count, s->ep_bufsize); - } + count = tu_min16(count, s->ep_bufsize); TU_ASSERT(stream_xfer(s, count), 0); return count; } else { -- cgit v1.3.1 From b3dd0a113adefd1493dbd1417ece346528951b1d Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Fri, 26 Dec 2025 17:25:25 +0100 Subject: Do not randomly include stm32h7xx.h Enable D-Cache unless we're compiling for the M4 core of a dual-core H7 mcu by directly testing CORE_CM4 --- src/common/tusb_mcu.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 55f7e0b7c..ebe486e40 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -245,13 +245,12 @@ #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 #elif TU_CHECK_MCU(OPT_MCU_STM32H7) - #include "stm32h7xx.h" #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 #define TUP_DCD_ENDPOINT_MAX 9 - #if __CORTEX_M == 7 + #ifndef CORE_CM4 // Enable dcache if DMA is enabled #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE -- cgit v1.3.1 From d77f1e8eb6f53cdb55987165b36e301daf1f9828 Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Fri, 26 Dec 2025 17:27:05 +0100 Subject: Prevent unused-variable warning in dcd_host.c 'idx' is not used if CFG_TUH_CDC_LINE_CODING_ON_ENUM is not defined. --- src/class/cdc/cdc_host.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 32f6827b0..f19c4a327 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -828,7 +828,9 @@ static bool set_line_state_on_enum(cdch_interface_t *p_cdc, tuh_xfer_t *xfer) { ENUM_SET_LINE_CONTROL, ENUM_SET_LINE_COMPLETE, }; + #ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM const uint8_t idx = get_idx_by_ptr(p_cdc); + #endif const uintptr_t state = xfer->user_data; switch (state) { -- cgit v1.3.1 -- cgit v1.3.1 From 83542ce912f902d78908eac7e0b0bb8830cb7741 Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Sun, 28 Dec 2025 14:18:17 +0000 Subject: Add detailed build instructions for rp2040 and esp32 to getting_started.rst - Added dedicated "Building for RP2040" section with pico-sdk installation steps - Added dedicated "Building for ESP32" section with esp-idf installation steps - Included platform-specific instructions for Linux/macOS and Windows - Added PICO_SDK_PATH export steps before cmake for rp2040 - Added esp-idf source/export steps before cmake for esp32 - Updated note section to reference new detailed sections - Documentation builds successfully without errors Co-authored-by: HiFiPhile <4375114+HiFiPhile@users.noreply.github.com> --- docs/getting_started.rst | 129 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 128 insertions(+), 1 deletion(-) diff --git a/docs/getting_started.rst b/docs/getting_started.rst index 0c3fcec80..9f558bfa4 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -34,7 +34,10 @@ Get the Code $ python tools/get_deps.py -b stm32h743eval # or python tools/get_deps.py stm32h7 .. note:: - For rp2040 `pico-sdk `_ or `esp-idf `_ for Espressif targets are required; install them per vendor instructions. + Some MCU families require additional SDKs: + + * **rp2040**: Requires `pico-sdk `_ - see `Building for RP2040`_ below + * **Espressif (esp32)**: Requires `esp-idf `_ - see `Building for ESP32`_ below Simple Device Example --------------------- @@ -149,6 +152,130 @@ A MCU can support multiple operational speed. By default, the example build syst $ make BOARD=stm32h743eval RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED all +Building for RP2040 +------------------- + +RP2040 boards (like Raspberry Pi Pico) require the Pico SDK to be installed and configured before building. + +Install Pico SDK +^^^^^^^^^^^^^^^^ + +**Linux/macOS:** + +.. code-block:: bash + + $ cd ~ + $ git clone https://github.com/raspberrypi/pico-sdk.git + $ cd pico-sdk + $ git submodule update --init + +**Windows:** + +.. code-block:: bash + + C:\> cd %USERPROFILE% + C:\Users\YourName> git clone https://github.com/raspberrypi/pico-sdk.git + C:\Users\YourName> cd pico-sdk + C:\Users\YourName\pico-sdk> git submodule update --init + +Set PICO_SDK_PATH +^^^^^^^^^^^^^^^^^ + +Before running cmake, export the SDK path: + +**Linux/macOS:** + +.. code-block:: bash + + $ export PICO_SDK_PATH=~/pico-sdk + +**Windows (Command Prompt):** + +.. code-block:: bash + + C:\> set PICO_SDK_PATH=%USERPROFILE%\pico-sdk + +**Windows (PowerShell):** + +.. code-block:: bash + + PS C:\> $env:PICO_SDK_PATH = "$env:USERPROFILE\pico-sdk" + +Build Example for RP2040 +^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: bash + + $ cd examples/device/cdc_msc + $ cmake -DBOARD=raspberry_pi_pico -B build + $ cmake --build build + +.. tip:: + Add the PICO_SDK_PATH export to your shell's profile file (e.g., ``~/.bashrc``, ``~/.zshrc``) to make it permanent. + + +Building for ESP32 +------------------ + +ESP32 boards require the ESP-IDF (Espressif IoT Development Framework) to be installed and sourced before building. + +Install ESP-IDF +^^^^^^^^^^^^^^^ + +**Linux/macOS:** + +.. code-block:: bash + + $ cd ~ + $ git clone --recursive https://github.com/espressif/esp-idf.git + $ cd esp-idf + $ ./install.sh all + +**Windows:** + +.. code-block:: bash + + C:\> cd %USERPROFILE% + C:\Users\YourName> git clone --recursive https://github.com/espressif/esp-idf.git + C:\Users\YourName> cd esp-idf + C:\Users\YourName\esp-idf> install.bat all + +Source ESP-IDF Environment +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Before running cmake, source the ESP-IDF export script: + +**Linux/macOS:** + +.. code-block:: bash + + $ source ~/esp-idf/export.sh + +**Windows (Command Prompt):** + +.. code-block:: bash + + C:\> %USERPROFILE%\esp-idf\export.bat + +**Windows (PowerShell):** + +.. code-block:: bash + + PS C:\> . $env:USERPROFILE\esp-idf\export.ps1 + +Build Example for ESP32 +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: bash + + $ cd examples/device/cdc_msc + $ cmake -DBOARD=espressif_s3_devkitc -B build + $ cmake --build build + +.. tip:: + You need to source the ESP-IDF export script in each new terminal session. Consider creating an alias in your shell's profile file for convenience. + + IAR Embedded Workbench ---------------------- -- cgit v1.3.1 From 1bb1efa8202c0cb5e49fa3fc50c608ac03daaa71 Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Sun, 28 Dec 2025 14:19:52 +0000 Subject: Use appropriate syntax highlighting for Windows commands - Changed Windows Command Prompt blocks from bash to bat for proper highlighting - Changed PowerShell blocks from bash to powershell for proper highlighting - Improves documentation readability and accuracy Co-authored-by: HiFiPhile <4375114+HiFiPhile@users.noreply.github.com> --- docs/getting_started.rst | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/getting_started.rst b/docs/getting_started.rst index 9f558bfa4..7ab3116df 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -171,7 +171,7 @@ Install Pico SDK **Windows:** -.. code-block:: bash +.. code-block:: bat C:\> cd %USERPROFILE% C:\Users\YourName> git clone https://github.com/raspberrypi/pico-sdk.git @@ -191,13 +191,13 @@ Before running cmake, export the SDK path: **Windows (Command Prompt):** -.. code-block:: bash +.. code-block:: bat C:\> set PICO_SDK_PATH=%USERPROFILE%\pico-sdk **Windows (PowerShell):** -.. code-block:: bash +.. code-block:: powershell PS C:\> $env:PICO_SDK_PATH = "$env:USERPROFILE\pico-sdk" @@ -233,7 +233,7 @@ Install ESP-IDF **Windows:** -.. code-block:: bash +.. code-block:: bat C:\> cd %USERPROFILE% C:\Users\YourName> git clone --recursive https://github.com/espressif/esp-idf.git @@ -253,13 +253,13 @@ Before running cmake, source the ESP-IDF export script: **Windows (Command Prompt):** -.. code-block:: bash +.. code-block:: bat C:\> %USERPROFILE%\esp-idf\export.bat **Windows (PowerShell):** -.. code-block:: bash +.. code-block:: powershell PS C:\> . $env:USERPROFILE\esp-idf\export.ps1 -- cgit v1.3.1 From db08f5f3fefb91ef59526558ad79bf9d8ae84e7c Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Sun, 28 Dec 2025 14:26:06 +0000 Subject: Fix trailing whitespace in getting_started.rst - Removed trailing whitespace from line 37 as detected by pre-commit check - Documentation builds successfully Co-authored-by: HiFiPhile <4375114+HiFiPhile@users.noreply.github.com> --- docs/getting_started.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/getting_started.rst b/docs/getting_started.rst index 7ab3116df..d9d81f23f 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -35,7 +35,7 @@ Get the Code .. note:: Some MCU families require additional SDKs: - + * **rp2040**: Requires `pico-sdk `_ - see `Building for RP2040`_ below * **Espressif (esp32)**: Requires `esp-idf `_ - see `Building for ESP32`_ below -- cgit v1.3.1 From 536223cbaa7d05ef58f15a3fab8ff951353d637c Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 27 Dec 2025 23:19:54 +0100 Subject: device/mtp: queue ZLP when needed Signed-off-by: HiFiPhile --- src/class/mtp/mtp_device.c | 54 +++++++++++++++++++++++++++++++--------------- 1 file changed, 37 insertions(+), 17 deletions(-) diff --git a/src/class/mtp/mtp_device.c b/src/class/mtp/mtp_device.c index 4942a105a..7b9e3db51 100644 --- a/src/class/mtp/mtp_device.c +++ b/src/class/mtp/mtp_device.c @@ -93,7 +93,7 @@ typedef struct { uint8_t ep_in; uint8_t ep_out; uint8_t ep_event; - + uint8_t ep_sz_fs; // Bulk Only Transfer (BOT) Protocol uint8_t phase; @@ -207,15 +207,21 @@ static bool mtpd_data_xfer(mtp_container_info_t* p_container, uint8_t ep_addr) { p_container->header->transaction_id = p_mtp->command.header.transaction_id; p_mtp->io_header = *p_container->header; // save header for subsequent data } else { - // OUT transfer: total length is at least max packet size - p_mtp->total_len = tu_max32(p_container->header->len, CFG_TUD_MTP_EP_BUFSIZE); + p_mtp->total_len = p_container->header->len; } } else { // subsequent data block: payload only TU_ASSERT(p_mtp->phase == MTP_PHASE_DATA); } - const uint16_t xact_len = (uint16_t) tu_min32(p_mtp->total_len - p_mtp->xferred_len, CFG_TUD_MTP_EP_BUFSIZE); + uint16_t xact_len = 0; + if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { + xact_len = (uint16_t) tu_min32(p_mtp->total_len - p_mtp->xferred_len, CFG_TUD_MTP_EP_BUFSIZE); + } else { + // Use fixed tranfer length to make ZLP handling easier + xact_len = CFG_TUD_MTP_EP_BUFSIZE; + } + if (xact_len) { // already transferred all bytes in header's length. Application make an unnecessary extra call TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, ep_addr)); @@ -287,15 +293,20 @@ uint16_t mtpd_open(uint8_t rhport, tusb_desc_interface_t const* itf_desc, uint16 p_mtp->itf_num = itf_desc->bInterfaceNumber; // Open interrupt IN endpoint - const tusb_desc_endpoint_t* ep_desc = (const tusb_desc_endpoint_t*) tu_desc_next(itf_desc); - TU_ASSERT(ep_desc->bDescriptorType == TUSB_DESC_ENDPOINT && ep_desc->bmAttributes.xfer == TUSB_XFER_INTERRUPT, 0); - TU_ASSERT(usbd_edpt_open(rhport, ep_desc), 0); - p_mtp->ep_event = ep_desc->bEndpointAddress; + const tusb_desc_endpoint_t* ep_desc_int = (const tusb_desc_endpoint_t*) tu_desc_next(itf_desc); + TU_ASSERT(ep_desc_int->bDescriptorType == TUSB_DESC_ENDPOINT && ep_desc_int->bmAttributes.xfer == TUSB_XFER_INTERRUPT, 0); + TU_ASSERT(usbd_edpt_open(rhport, ep_desc_int), 0); + p_mtp->ep_event = ep_desc_int->bEndpointAddress; // Open endpoint pair - TU_ASSERT(usbd_open_edpt_pair(rhport, tu_desc_next(ep_desc), 2, TUSB_XFER_BULK, &p_mtp->ep_out, &p_mtp->ep_in), 0); + const tusb_desc_endpoint_t* ep_desc_bulk = (const tusb_desc_endpoint_t*) tu_desc_next(ep_desc_int); + TU_ASSERT(usbd_open_edpt_pair(rhport, (const uint8_t*)ep_desc_bulk, 2, TUSB_XFER_BULK, &p_mtp->ep_out, &p_mtp->ep_in), 0); TU_ASSERT(prepare_new_command(p_mtp), 0); + if (tud_speed_get() == TUSB_SPEED_FULL) { + p_mtp->ep_sz_fs = (uint8_t)tu_edpt_packet_size(ep_desc_bulk); + } + return mtpd_itf_size; } @@ -417,19 +428,28 @@ bool mtpd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } case MTP_PHASE_DATA: { - const uint16_t bulk_mps = (tud_speed_get() == TUSB_SPEED_HIGH) ? 512 : 64; p_mtp->xferred_len += xferred_bytes; cb_data.total_xferred_bytes = p_mtp->xferred_len; - bool is_complete = false; - // complete if ZLP or short packet or total length reached - if (xferred_bytes == 0 || // ZLP - (xferred_bytes & (bulk_mps - 1)) || // short packet - p_mtp->xferred_len >= p_mtp->total_len) { // total length reached - is_complete = true; + const bool is_data_in = (ep_addr == p_mtp->ep_in); + const uint16_t bulk_mps = (tud_speed_get() == TUSB_SPEED_HIGH) ? 512 : p_mtp->ep_sz_fs; + // For IN endpoint, threshold is bulk max packet size + // For OUT endpoint, threshold is endpoint buffer size, since we always queue fixed size + const uint16_t threshold = is_data_in ? bulk_mps : CFG_TUD_MTP_EP_BUFSIZE; + + // Check completion: ZLP, short packet, or total length reached + bool is_complete = (xferred_bytes == 0 || + xferred_bytes < threshold || + p_mtp->xferred_len >= p_mtp->total_len); + + // Send/queue ZLP if packet is full-sized but transfer is complete + if (is_complete && xferred_bytes > 0 && !(xferred_bytes & (threshold - 1))) { + TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, ep_addr)); + TU_ASSERT(usbd_edpt_xfer(p_mtp->rhport, ep_addr, NULL, 0, false)); + return true; } - if (ep_addr == p_mtp->ep_in) { + if (is_data_in) { // Data In if (is_complete) { cb_data.io_container.header->len = sizeof(mtp_container_header_t); -- cgit v1.3.1 From d27e55a3dae252025fff429a3951e1b198079ad5 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 29 Dec 2025 00:04:53 +0100 Subject: device/mtp: improve logging Signed-off-by: HiFiPhile --- src/class/mtp/mtp_device.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/src/class/mtp/mtp_device.c b/src/class/mtp/mtp_device.c index 7b9e3db51..13f868d14 100644 --- a/src/class/mtp/mtp_device.c +++ b/src/class/mtp/mtp_device.c @@ -218,12 +218,14 @@ static bool mtpd_data_xfer(mtp_container_info_t* p_container, uint8_t ep_addr) { if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { xact_len = (uint16_t) tu_min32(p_mtp->total_len - p_mtp->xferred_len, CFG_TUD_MTP_EP_BUFSIZE); } else { - // Use fixed tranfer length to make ZLP handling easier + // Use fixed transfer length to make ZLP handling easier xact_len = CFG_TUD_MTP_EP_BUFSIZE; } + TU_LOG_DRV(" MTP Data Xfer %s: xferred_len/total_len=%lu/%lu, xact_len=%u\r\n", + (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) ? "IN" : "OUT", + p_mtp->xferred_len, p_mtp->total_len, xact_len); if (xact_len) { - // already transferred all bytes in header's length. Application make an unnecessary extra call TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, ep_addr)); TU_ASSERT(usbd_edpt_xfer(p_mtp->rhport, ep_addr, _mtpd_epbuf.buf, xact_len, false)); } @@ -388,8 +390,8 @@ bool mtpd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t mtp_generic_container_t* p_container = (mtp_generic_container_t*) _mtpd_epbuf.buf; #if CFG_TUSB_DEBUG >= CFG_TUD_MTP_LOG_LEVEL - tu_lookup_find(&_mtp_op_table, p_mtp->command.header.code); - TU_LOG_DRV(" MTP %s: %s phase\r\n", (const char *) tu_lookup_find(&_mtp_op_table, p_mtp->command.header.code), + const uint16_t code = (p_mtp->phase == MTP_PHASE_COMMAND) ? p_container->header.code : p_mtp->command.header.code; + TU_LOG_DRV(" MTP %s: %s phase\r\n", (const char *) tu_lookup_find(&_mtp_op_table, code), _mtp_phase_str[p_mtp->phase]); #endif @@ -442,8 +444,12 @@ bool mtpd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes < threshold || p_mtp->xferred_len >= p_mtp->total_len); + TU_LOG_DRV(" MTP Data %s CB: xferred_bytes=%lu, xferred_len/total_len=%lu/%lu, is_complete=%d\r\n", + is_data_in ? "IN" : "OUT", xferred_bytes, p_mtp->xferred_len, p_mtp->total_len, is_complete ? 1 : 0); + // Send/queue ZLP if packet is full-sized but transfer is complete if (is_complete && xferred_bytes > 0 && !(xferred_bytes & (threshold - 1))) { + TU_LOG_DRV(" QUEUE ZLP\r\n"); TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, ep_addr)); TU_ASSERT(usbd_edpt_xfer(p_mtp->rhport, ep_addr, NULL, 0, false)); return true; -- cgit v1.3.1 From 237e9f21fd2f5211abd3784954b72fa900fff7ea Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 29 Dec 2025 20:54:04 +0100 Subject: example/mtp: fix root parent id Signed-off-by: HiFiPhile --- examples/device/mtp/src/mtp_fs_example.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/examples/device/mtp/src/mtp_fs_example.c b/examples/device/mtp/src/mtp_fs_example.c index 7fd7db61b..60fc9f79e 100644 --- a/examples/device/mtp/src/mtp_fs_example.c +++ b/examples/device/mtp/src/mtp_fs_example.c @@ -557,7 +557,7 @@ static int32_t fs_send_object_info(tud_mtp_cb_data_t* cb_data) { return MTP_RESP_INVALID_STORAGE_ID; } - if (obj_info->parent_object != 0) { // not root + if (obj_info->parent_object != 0 && obj_info->parent_object != 0xFFFFFFFFu) { // not root fs_file_t* parent = fs_get_file(obj_info->parent_object); if (parent == NULL || 0u == parent->association_type) { return MTP_RESP_INVALID_PARENT_OBJECT; -- cgit v1.3.1 From 239e20ba7399fc026325c4cd8c98c08a160a9773 Mon Sep 17 00:00:00 2001 From: zhiqiang-ch Date: Tue, 30 Dec 2025 10:44:03 +0800 Subject: support for the AT32F45X series --- README.rst | 3 +- docs/reference/boards.rst | 3 + docs/reference/dependencies.rst | 1 + hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h | 177 ++++++++++++++++ hw/bsp/at32f45x/at32f45x_clock.c | 114 ++++++++++ hw/bsp/at32f45x/at32f45x_clock.h | 45 ++++ hw/bsp/at32f45x/at32f45x_conf.h | 174 +++++++++++++++ hw/bsp/at32f45x/at32f45x_int.c | 101 +++++++++ hw/bsp/at32f45x/at32f45x_int.h | 60 ++++++ hw/bsp/at32f45x/boards/at_start_f455/board.cmake | 8 + hw/bsp/at32f45x/boards/at_start_f455/board.h | 96 +++++++++ hw/bsp/at32f45x/boards/at_start_f455/board.mk | 7 + hw/bsp/at32f45x/boards/at_start_f456/board.cmake | 8 + hw/bsp/at32f45x/boards/at_start_f456/board.h | 96 +++++++++ hw/bsp/at32f45x/boards/at_start_f456/board.mk | 7 + hw/bsp/at32f45x/boards/at_start_f457/board.cmake | 8 + hw/bsp/at32f45x/boards/at_start_f457/board.h | 96 +++++++++ hw/bsp/at32f45x/boards/at_start_f457/board.mk | 7 + hw/bsp/at32f45x/family.c | 258 +++++++++++++++++++++++ hw/bsp/at32f45x/family.cmake | 97 +++++++++ hw/bsp/at32f45x/family.mk | 40 ++++ src/common/tusb_mcu.h | 5 + src/portable/synopsys/dwc2/dwc2_at32.h | 5 + src/tusb_option.h | 1 + tools/get_deps.py | 3 + 25 files changed, 1419 insertions(+), 1 deletion(-) create mode 100644 hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/at32f45x/at32f45x_clock.c create mode 100644 hw/bsp/at32f45x/at32f45x_clock.h create mode 100644 hw/bsp/at32f45x/at32f45x_conf.h create mode 100644 hw/bsp/at32f45x/at32f45x_int.c create mode 100644 hw/bsp/at32f45x/at32f45x_int.h create mode 100644 hw/bsp/at32f45x/boards/at_start_f455/board.cmake create mode 100644 hw/bsp/at32f45x/boards/at_start_f455/board.h create mode 100644 hw/bsp/at32f45x/boards/at_start_f455/board.mk create mode 100644 hw/bsp/at32f45x/boards/at_start_f456/board.cmake create mode 100644 hw/bsp/at32f45x/boards/at_start_f456/board.h create mode 100644 hw/bsp/at32f45x/boards/at_start_f456/board.mk create mode 100644 hw/bsp/at32f45x/boards/at_start_f457/board.cmake create mode 100644 hw/bsp/at32f45x/boards/at_start_f457/board.h create mode 100644 hw/bsp/at32f45x/boards/at_start_f457/board.mk create mode 100644 hw/bsp/at32f45x/family.c create mode 100644 hw/bsp/at32f45x/family.cmake create mode 100644 hw/bsp/at32f45x/family.mk diff --git a/README.rst b/README.rst index 178a084ce..29b2f4fca 100644 --- a/README.rst +++ b/README.rst @@ -141,7 +141,8 @@ Supported CPUs +--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ | Artery AT32 | F403a_407, F413 | ✔ | | | fsdev | Packet SRAM 512 | | +-----------------------------+--------+------+-----------+------------------------+--------------------+ -| | F415, F435_437, F423, F425 | ✔ | ✔ | | dwc2 | | +| | F415, F435_437, F423, | ✔ | ✔ | | dwc2 | | +| | F425, F45x | | | | | | | +-----------------------------+--------+------+-----------+------------------------+--------------------+ | | F402_F405 | ✔ | ✔ | ✔ | dwc2 | F405 is HS | +--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index 12da5c90b..cacf52e1a 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -44,6 +44,9 @@ at_start_f423 AT-START-F423 at32f423 https:/ at_start_f425 AT-START-F425 at32f425 https://www.arterychip.com/en/product/AT32F425.jsp at_start_f435 AT-START-F435 at32f435_437 https://www.arterychip.com/en/product/AT32F435.jsp at_start_f437 AT-START-F437 at32f435_437 https://www.arterychip.com/en/product/AT32F437.jsp +at_start_f455 AT-START-F455 at32f45x https://www.arterychip.com/en/product/AT32F455.jsp +at_start_f456 AT-START-F456 at32f45x https://www.arterychip.com/en/product/AT32F456.jsp +at_start_f457 AT-START-F457 at32f45x https://www.arterychip.com/en/product/AT32F457.jsp ========================= ============================= ============= ==================================================== ====== Bridgetek diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index de1603383..ce5f265d5 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -16,6 +16,7 @@ hw/mcu/artery/at32f415 https://github.com/ArteryTek/AT32F415_ hw/mcu/artery/at32f423 https://github.com/ArteryTek/AT32F423_Firmware_Library.git 2afa7f12852e57a9e8aab3a892c641e1a8635a18 at32f423 hw/mcu/artery/at32f425 https://github.com/ArteryTek/AT32F425_Firmware_Library.git 620233e1357d5c1b7e2bde6b9dd5196822b91817 at32f425 hw/mcu/artery/at32f435_437 https://github.com/ArteryTek/AT32F435_437_Firmware_Library.git 25439cc6650a8ae0345934e8707a5f38c7ae41f8 at32f435_437 +hw/mcu/artery/at32f45x https://github.com/ArteryTek/AT32F45x_Firmware_Library.git 3d4a1b38be8ebac292e2350ca53bc4bfa4430233 at32f45x hw/mcu/bridgetek/ft9xx/ft90x-sdk https://github.com/BRTSG-FOSS/ft90x-sdk.git 91060164afe239fcb394122e8bf9eb24d3194eb1 brtmm90x hw/mcu/broadcom https://github.com/adafruit/broadcom-peripherals.git 08370086080759ed54ac1136d62d2ad24c6fa267 broadcom_32bit broadcom_64bit hw/mcu/gd/nuclei-sdk https://github.com/Nuclei-Software/nuclei-sdk.git 7eb7bfa9ea4fbeacfafe1d5f77d5a0e6ed3922e7 gd32vf103 diff --git a/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..8a9906d39 --- /dev/null +++ b/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,177 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ +// Include MCU header + #include "at32f45x.h" + +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +#ifdef __RX__ +/* Renesas RX series */ +#define vSoftwareInterruptISR INT_Excep_ICU_SWINT +#define vTickISR INT_Excep_CMT0_CMI0 +#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) +#define configKERNEL_INTERRUPT_PRIORITY 1 +#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 + +#else + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ +#if defined(__NVIC_PRIO_BITS) + // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h + #define configPRIO_BITS __NVIC_PRIO_BITS + +#elif defined(__ECLIC_INTCTLBITS) + // RISC-V Bumblebee core from nuclei + #define configPRIO_BITS __ECLIC_INTCTLBITS + +#elif defined(__IASMARM__) + // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. + // Therefore we will hard coded it to minimum value of 2 to get pass ci build. + // IAR user must update this to correct value of the target MCU + #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" + #define configPRIO_BITS 2 + +#else + #error "FreeRTOS configPRIO_BITS to be defined" +#endif + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<dt = (*((uint8_t const *) buf) & 0x01FF); + buf++; + } + return len; +#else + (void) buf; + (void) len; + return 0; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +void SVC_Handler(void) { +} + +void PendSV_Handler(void) { +} +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void); +void _init(void) { +} + +#ifdef USE_FULL_ASSERT +void assert_failed(const char *file, uint32_t line) { + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/hw/bsp/at32f45x/family.cmake b/hw/bsp/at32f45x/family.cmake new file mode 100644 index 000000000..fe13347af --- /dev/null +++ b/hw/bsp/at32f45x/family.cmake @@ -0,0 +1,97 @@ +include_guard() + +set(AT32_FAMILY at32f45x) +set(AT32_SDK_LIB ${TOP}/hw/mcu/artery/${AT32_FAMILY}/libraries) + +string(TOUPPER ${AT32_FAMILY} AT32_FAMILY_UPPER) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "") + +#------------------------------------ +# Startup & Linker script +#------------------------------------ +set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} STATIC + ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c + ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${AT32_SDK_LIB}/cmsis/cm4/core_support + ${AT32_SDK_LIB}/cmsis/cm4/device_support + ${AT32_SDK_LIB}/drivers/inc + ) + + update_board(${BOARD_TARGET}) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/at32f45x/family.mk b/hw/bsp/at32f45x/family.mk new file mode 100644 index 000000000..e42f27557 --- /dev/null +++ b/hw/bsp/at32f45x/family.mk @@ -0,0 +1,40 @@ +AT32_FAMILY = at32f45x +AT32_SDK_LIB = hw/mcu/artery/${AT32_FAMILY}/libraries + +include $(TOP)/$(BOARD_PATH)/board.mk + +CPU_CORE ?= cortex-m4 + +CFLAGS_GCC += \ + -flto + +CFLAGS += \ + -DCFG_TUSB_MCU=OPT_MCU_AT32F45X \ + +LDFLAGS_GCC += \ + -flto --specs=nosys.specs -nostdlib -nostartfiles + +SRC_C += \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_crm.c \ + $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_acc.c \ + $(AT32_SDK_LIB)/cmsis/cm4/device_support/system_${AT32_FAMILY}.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(AT32_SDK_LIB)/drivers/inc \ + $(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/core_support \ + $(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/device_support + +SRC_S_GCC += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s +SRC_S_IAR += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s + +LD_FILE_GCC ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld +LD_FILE_IAR ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf + +flash: flash-atlink diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 55f7e0b7c..ce690acb8 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -661,6 +661,11 @@ #define TUP_USBIP_DWC2_AT32 #define TUP_DCD_ENDPOINT_MAX 8 +#elif TU_CHECK_MCU(OPT_MCU_AT32F45X) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_AT32 + #define TUP_DCD_ENDPOINT_MAX 8 + //--------------------------------------------------------------------+ // HPMicro //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dwc2_at32.h b/src/portable/synopsys/dwc2/dwc2_at32.h index 513495eb1..10824ae92 100644 --- a/src/portable/synopsys/dwc2/dwc2_at32.h +++ b/src/portable/synopsys/dwc2/dwc2_at32.h @@ -61,6 +61,11 @@ #define OTG1_FIFO_SIZE 1280 #define OTG1_IRQn OTGFS1_IRQn #define DWC2_OTG1_REG_BASE 0x50000000UL +#elif CFG_TUSB_MCU == OPT_MCU_AT32F45X + #include + #define OTG1_FIFO_SIZE 1280 + #define OTG1_IRQn OTGFS1_IRQn + #define DWC2_OTG1_REG_BASE 0x50000000UL #endif #ifdef __cplusplus diff --git a/src/tusb_option.h b/src/tusb_option.h index 64fe899db..35a0d97db 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -216,6 +216,7 @@ #define OPT_MCU_AT32F402_405 2504 ///< ArteryTek AT32F402_405 #define OPT_MCU_AT32F425 2505 ///< ArteryTek AT32F425 #define OPT_MCU_AT32F413 2506 ///< ArteryTek AT32F413 +#define OPT_MCU_AT32F45X 2507 ///< ArteryTek AT32F45x // HPMicro #define OPT_MCU_HPM 2600 ///< HPMicro diff --git a/tools/get_deps.py b/tools/get_deps.py index deacbb23b..773445adc 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -244,6 +244,9 @@ deps_optional = { 'hw/mcu/artery/at32f413': ['https://github.com/ArteryTek/AT32F413_Firmware_Library.git', 'f6fe62dfec9fd40c5b63d92fc5ef2c2b5e77a450', 'at32f413'], + 'hw/mcu/artery/at32f45x': ['https://github.com/ArteryTek/AT32F45x_Firmware_Library.git', + '3d4a1b38be8ebac292e2350ca53bc4bfa4430233', + 'at32f45x'], 'hw/mcu/hpmicro/hpm_sdk': ['https://github.com/hpmicro/hpm_sdk', '8d2af741ecc4aaa82d7ee395dc1ce25d7070c3ff', 'hpmicro'], -- cgit v1.3.1 From 4e4398898040118969421dc236ec8f453f9b503d Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Dec 2025 18:09:54 +0700 Subject: tusb_fifo remove item_size make it fifo of bytes --- src/class/audio/audio_device.c | 12 +-- src/common/tusb_fifo.c | 139 +++++++++++++++------------------- src/common/tusb_fifo.h | 39 +++++----- src/common/tusb_verify.h | 10 ++- src/osal/osal_none.h | 16 ++-- src/osal/osal_pico.h | 54 +++++++------ src/portable/synopsys/dwc2/dcd_dwc2.c | 17 ++--- src/tusb.c | 2 +- src/tusb_option.h | 1 + test/unit-test/project.yml | 1 + test/unit-test/test/test_fifo.c | 36 +-------- 11 files changed, 140 insertions(+), 187 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 55eba81dd..be0224811 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -674,17 +674,17 @@ void audiod_init(void) { switch (i) { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 case 0: - tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ, true); break; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 case 1: - tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ, true); break; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 case 2: - tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ, true); break; #endif } @@ -716,17 +716,17 @@ void audiod_init(void) { switch (i) { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 case 0: - tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ, true); break; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 case 1: - tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ, true); break; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 case 2: - tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ, true); break; #endif } diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 450c31f57..7822b7aae 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -59,7 +59,7 @@ TU_ATTR_ALWAYS_INLINE static inline void ff_unlock(osal_mutex_t mutex) { //--------------------------------------------------------------------+ // Setup API //--------------------------------------------------------------------+ -bool tu_fifo_config(tu_fifo_t *f, void *buffer, uint16_t depth, uint16_t item_size, bool overwritable) { +bool tu_fifo_config(tu_fifo_t *f, void *buffer, uint16_t depth, bool overwritable) { // Limit index space to 2*depth - this allows for a fast "modulo" calculation // but limits the maximum depth to 2^16/2 = 2^15 and buffer overflows are detectable // only if overflow happens once (important for unsupervised DMA applications) @@ -72,7 +72,6 @@ bool tu_fifo_config(tu_fifo_t *f, void *buffer, uint16_t depth, uint16_t item_si f->buffer = (uint8_t *)buffer; f->depth = depth; - f->item_size = (uint16_t)(item_size & 0x7FFFu); f->overwritable = overwritable; f->rd_idx = 0u; f->wr_idx = 0u; @@ -130,7 +129,10 @@ enum { }; // Copy to fifo from fixed address buffer (usually a rx register) with TU_FIFO_FIXED_ADDR_RW32 mode -static void ff_push_fixed_addr(uint8_t *ff_buf, const volatile fixed_access_item_t *reg_rx, uint16_t len) { +static void ff_push_access_mode(uint8_t *ff_buf, const volatile fixed_access_item_t *reg_rx, uint16_t len, + uint8_t data_stride, uint8_t addr_stride) { + (void)data_stride; + (void)addr_stride; // Reading full available 16/32-bit data from const app address uint16_t n_items = len / sizeof(fixed_access_item_t); while (n_items--) { @@ -167,86 +169,70 @@ static void ff_pull_fixed_addr(volatile fixed_access_item_t *reg_tx, const uint8 #endif // send n items to fifo WITHOUT updating write pointer -static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, - tu_fifo_access_mode_t copy_mode) { - const uint16_t lin_count = f->depth - wr_ptr; - const uint16_t wrap_count = n - lin_count; - - uint16_t lin_bytes = lin_count * f->item_size; - uint16_t wrap_bytes = wrap_count * f->item_size; - - // current buffer of fifo - uint8_t *ff_buf = f->buffer + (wr_ptr * f->item_size); - - switch (copy_mode) { - case TU_FIFO_INC_ADDR_RW8: - if (n <= lin_count) { - // Linear only - memcpy(ff_buf, app_buf, n * f->item_size); +static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, uint8_t data_stride, + uint8_t addr_stride) { + uint16_t lin_bytes = f->depth - wr_ptr; + uint16_t wrap_bytes = n - lin_bytes; + uint8_t *ff_buf = f->buffer + wr_ptr; + +#if CFG_TUSB_FIFO_MULTI_BYTES_ACCESS + if (data_stride > 1) { + const volatile fixed_access_item_t *reg_rx = (volatile const fixed_access_item_t *)app_buf; + if (n <= lin_bytes) { + // Linear only + ff_push_access_mode(ff_buf, reg_rx, n, data_stride, addr_stride); + } else { + // Wrap around + + // Write full words to linear part of buffer + uint16_t lin_nitems_bytes = lin_bytes & ~FIXED_ACCESS_REMAINDER_MASK; + ff_push_access_mode(ff_buf, reg_rx, lin_nitems_bytes, data_stride, addr_stride); + ff_buf += lin_nitems_bytes; + + // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary + const uint8_t rem = lin_bytes & FIXED_ACCESS_REMAINDER_MASK; + if (rem > 0) { + const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(fixed_access_item_t) - rem); + const fixed_access_item_t tmp = *reg_rx; + tu_scatter_write32(tmp, ff_buf, rem, f->buffer, remrem); + + wrap_bytes -= remrem; + ff_buf = f->buffer + remrem; // wrap around } else { - // Wrap around - memcpy(ff_buf, app_buf, lin_bytes); // linear part - memcpy(f->buffer, ((const uint8_t *)app_buf) + lin_bytes, wrap_bytes); // wrapped part + ff_buf = f->buffer; // wrap around to beginning } - break; -#if CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH - case TU_FIFO_FIXED_ADDR_RW32: { - const volatile fixed_access_item_t *reg_rx = (volatile const fixed_access_item_t *)app_buf; - if (n <= lin_count) { - // Linear only - ff_push_fixed_addr(ff_buf, reg_rx, n * f->item_size); - } else { - // Wrap around - - // Write full words to linear part of buffer - uint16_t lin_nitems_bytes = lin_bytes & ~FIXED_ACCESS_REMAINDER_MASK; - ff_push_fixed_addr(ff_buf, reg_rx, lin_nitems_bytes); - ff_buf += lin_nitems_bytes; - - // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary - const uint8_t rem = lin_bytes & FIXED_ACCESS_REMAINDER_MASK; - if (rem > 0) { - const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(fixed_access_item_t) - rem); - const fixed_access_item_t tmp = *reg_rx; - tu_scatter_write32(tmp, ff_buf, rem, f->buffer, remrem); - - wrap_bytes -= remrem; - ff_buf = f->buffer + remrem; // wrap around - } else { - ff_buf = f->buffer; // wrap around to beginning - } - - // Write data wrapped part - if (wrap_bytes > 0) { - ff_push_fixed_addr(ff_buf, reg_rx, wrap_bytes); - } + // Write data wrapped part + if (wrap_bytes > 0) { + ff_push_access_mode(ff_buf, reg_rx, wrap_bytes, data_stride, addr_stride); } - break; } + } else #endif - - default: - break; // unknown mode + { + // single byte access + if (n <= lin_bytes) { + // Linear only + memcpy(ff_buf, app_buf, n); + } else { + // Wrap around + memcpy(ff_buf, app_buf, lin_bytes); // linear part + memcpy(f->buffer, ((const uint8_t *)app_buf) + lin_bytes, wrap_bytes); // wrapped part + } } } // get n items from fifo WITHOUT updating read pointer static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, tu_fifo_access_mode_t copy_mode) { - const uint16_t lin_count = f->depth - rd_ptr; - const uint16_t wrap_count = n - lin_count; // only used if wrapped - - uint16_t lin_bytes = lin_count * f->item_size; - uint16_t wrap_bytes = wrap_count * f->item_size; - - // current buffer of fifo - const uint8_t *ff_buf = f->buffer + (rd_ptr * f->item_size); + uint16_t lin_bytes = f->depth - rd_ptr; + uint16_t wrap_bytes = n - lin_bytes; // only used if wrapped + const uint8_t *ff_buf = f->buffer + rd_ptr; switch (copy_mode) { case TU_FIFO_INC_ADDR_RW8: - if (n <= lin_count) { + if (n <= lin_bytes) { // Linear only - memcpy(app_buf, ff_buf, n * f->item_size); + memcpy(app_buf, ff_buf, n); } else { // Wrap around memcpy(app_buf, ff_buf, lin_bytes); // linear part @@ -258,9 +244,9 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd case TU_FIFO_FIXED_ADDR_RW32: { volatile fixed_access_item_t *reg_tx = (volatile fixed_access_item_t *)app_buf; - if (n <= lin_count) { + if (n <= lin_bytes) { // Linear only - ff_pull_fixed_addr(reg_tx, ff_buf, n * f->item_size); + ff_pull_fixed_addr(reg_tx, ff_buf, n); } else { // Wrap around case @@ -389,7 +375,8 @@ uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, tu_f } // Write n items to fifo with access mode -uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, tu_fifo_access_mode_t access_mode) { +uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, uint8_t data_stride, + uint8_t addr_stride) { if (n == 0) { return 0; } @@ -415,8 +402,8 @@ uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, // function! Since it would end up in a race condition with read functions! if (n >= f->depth) { // Only copy last part - if (access_mode == TU_FIFO_INC_ADDR_RW8) { - buf8 += (n - f->depth) * f->item_size; + if (data_stride == TU_FIFO_INC_ADDR_RW8) { + buf8 += (n - f->depth); } else { // TODO should read from hw fifo to discard data, however reading an odd number could // accidentally discard data. @@ -451,7 +438,7 @@ uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, const uint16_t wr_ptr = idx2ptr(f->depth, wr_idx); TU_LOG(TU_FIFO_DBG, "actual_n = %u, wr_ptr = %u", n, wr_ptr); - ff_push_n(f, buf8, n, wr_ptr, access_mode); + ff_push_n(f, buf8, n, wr_ptr, data_stride, addr_stride); f->wr_idx = advance_index(f->depth, wr_idx, n); TU_LOG(TU_FIFO_DBG, "\tnew_wr = %u\r\n", f->wr_idx); @@ -491,7 +478,7 @@ static bool ff_peek_local(tu_fifo_t *f, void *buf, uint16_t wr_idx, uint16_t rd_ } const uint16_t rd_ptr = idx2ptr(f->depth, rd_idx); - memcpy(buf, f->buffer + (rd_ptr * f->item_size), f->item_size); + memcpy(buf, f->buffer + rd_ptr, 1); return true; } @@ -526,7 +513,7 @@ bool tu_fifo_write(tu_fifo_t *f, const void *data) { ret = false; } else { const uint16_t wr_ptr = idx2ptr(f->depth, wr_idx); - memcpy(f->buffer + (wr_ptr * f->item_size), data, f->item_size); + memcpy(f->buffer + wr_ptr, data, 1); f->wr_idx = advance_index(f->depth, wr_idx, 1); ret = true; } diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index f58cc3fcb..b48cf4cea 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -58,6 +58,9 @@ extern "C" { #define CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH 0 #endif +#ifndef CFG_TUSB_FIFO_MULTI_BYTES_ACCESS + #define CFG_TUSB_FIFO_MULTI_BYTES_ACCESS 0 +#endif /* Write/Read "pointer" is in the range of: 0 .. depth - 1, and is used to get the fifo data. * Write/Read "index" is always in the range of: 0 .. 2*depth-1 @@ -118,13 +121,9 @@ extern "C" { typedef struct { uint8_t *buffer; // buffer pointer uint16_t depth; // max items + bool overwritable; // ovwerwritable when full - struct TU_ATTR_PACKED { - uint16_t item_size : 15; // size of each item - bool overwritable : 1; // ovwerwritable when full - }; - - volatile uint16_t wr_idx; // write index + volatile uint16_t wr_idx; // write index TODO maybe can drop volatile volatile uint16_t rd_idx; // read index #if OSAL_MUTEX_REQUIRED @@ -141,17 +140,16 @@ typedef struct { } linear, wrapped; } tu_fifo_buffer_info_t; -#define TU_FIFO_INIT(_buffer, _depth, _type, _overwritable) \ - { \ - .buffer = _buffer, \ - .depth = _depth, \ - .item_size = sizeof(_type), \ - .overwritable = _overwritable, \ +#define TU_FIFO_INIT(_buffer, _depth, _overwritable) \ + { \ + .buffer = _buffer, \ + .depth = _depth, \ + .overwritable = _overwritable, \ } -#define TU_FIFO_DEF(_name, _depth, _type, _overwritable) \ - uint8_t _name##_buf[_depth*sizeof(_type)]; \ - tu_fifo_t _name = TU_FIFO_INIT(_name##_buf, _depth, _type, _overwritable) +#define TU_FIFO_DEF(_name, _depth, _overwritable) \ + uint8_t _name##_buf[_depth]; \ + tu_fifo_t _name = TU_FIFO_INIT(_name##_buf, _depth, _overwritable) // Write modes intended to allow special read and write functions to be able to // copy data to and from USB hardware FIFOs as needed for e.g. STM32s and others @@ -163,7 +161,7 @@ typedef enum { //--------------------------------------------------------------------+ // Setup API //--------------------------------------------------------------------+ -bool tu_fifo_config(tu_fifo_t *f, void *buffer, uint16_t depth, uint16_t item_size, bool overwritable); +bool tu_fifo_config(tu_fifo_t *f, void *buffer, uint16_t depth, bool overwritable); void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable); void tu_fifo_clear(tu_fifo_t *f); @@ -223,14 +221,11 @@ uint16_t tu_fifo_discard_n(tu_fifo_t *f, uint16_t n); //--------------------------------------------------------------------+ // Write API //--------------------------------------------------------------------+ -uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, tu_fifo_access_mode_t access_mode); +uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, uint8_t data_stride, + uint8_t addr_stride); bool tu_fifo_write(tu_fifo_t *f, const void *data); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n) { - return tu_fifo_write_n_access_mode(f, data, n, TU_FIFO_INC_ADDR_RW8); -} - -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n_fixed_addr(tu_fifo_t *f, const void *data, uint16_t n) { - return tu_fifo_write_n_access_mode(f, data, n, TU_FIFO_FIXED_ADDR_RW32); + return tu_fifo_write_n_access_mode(f, data, n, 1, 1); } //--------------------------------------------------------------------+ diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 587554e7f..c9e06361c 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -96,10 +96,12 @@ * - TU_VERIFY_1ARGS : return false if failed * - TU_VERIFY_2ARGS : return provided value if failed *------------------------------------------------------------------*/ -#define TU_VERIFY_DEFINE(_cond, _ret) \ - do { \ - if (!(_cond)) { return _ret; } \ - } while(0) +#define TU_VERIFY_DEFINE(_cond, _ret) \ + do { \ + if (!(_cond)) { \ + return _ret; \ + } \ + } while (0) #define TU_VERIFY_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, false) #define TU_VERIFY_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, _ret) diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index aa6111a16..6ab18ace8 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -157,18 +157,18 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd typedef struct { void (* interrupt_set)(bool enabled); + uint16_t item_size; tu_fifo_t ff; } osal_queue_def_t; typedef osal_queue_def_t* osal_queue_t; // _int_set is used as mutex in OS NONE (disable/enable USB ISR) -#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ - uint8_t _name##_buf[_depth*sizeof(_type)]; \ - osal_queue_def_t _name = { \ - .interrupt_set = _int_set, \ - .ff = TU_FIFO_INIT(_name##_buf, _depth, _type, false) \ - } +#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ + uint8_t _name##_buf[_depth * sizeof(_type)]; \ + osal_queue_def_t _name = {.interrupt_set = _int_set, \ + .item_size = sizeof(_type), \ + .ff = TU_FIFO_INIT(_name##_buf, _depth * sizeof(_type), false)} TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { tu_fifo_clear(&qdef->ff); @@ -184,7 +184,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, v (void) msec; // not used, always behave as msec = 0 qhdl->interrupt_set(false); - const bool success = tu_fifo_read(&qhdl->ff, data); + const bool success = tu_fifo_read_n(&qhdl->ff, data, qhdl->item_size); qhdl->interrupt_set(true); return success; @@ -195,7 +195,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void qhdl->interrupt_set(false); } - const bool success = tu_fifo_write(&qhdl->ff, data); + const bool success = tu_fifo_write_n(&qhdl->ff, data, qhdl->item_size); if (!in_isr) { qhdl->interrupt_set(true); diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index f5385071a..79b728e9a 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -47,40 +47,39 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { // Spinlock API //--------------------------------------------------------------------+ typedef critical_section_t osal_spinlock_t; // pico implement critical section with spinlock -#define OSAL_SPINLOCK_DEF(_name, _int_set) \ - osal_spinlock_t _name +#define OSAL_SPINLOCK_DEF(_name, _int_set) osal_spinlock_t _name TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { critical_section_init(ctx); } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + (void)in_isr; critical_section_enter_blocking(ctx); } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + (void)in_isr; critical_section_exit(ctx); } //--------------------------------------------------------------------+ // Binary Semaphore API //--------------------------------------------------------------------+ -typedef struct semaphore osal_semaphore_def_t, * osal_semaphore_t; +typedef struct semaphore osal_semaphore_def_t, *osal_semaphore_t; -TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t* semdef) { +TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t *semdef) { sem_init(semdef, 0, 255); return semdef; } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t semd_hdl) { - (void) semd_hdl; + (void)semd_hdl; return true; // nothing to do } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { - (void) in_isr; + (void)in_isr; return sem_release(sem_hdl); } @@ -96,15 +95,15 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t s // MUTEX API // Within tinyusb, mutex is never used in ISR context //--------------------------------------------------------------------+ -typedef struct mutex osal_mutex_def_t, * osal_mutex_t; +typedef struct mutex osal_mutex_def_t, *osal_mutex_t; -TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef) { +TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t *mdef) { mutex_init(mdef); return mdef; } TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_delete(osal_mutex_t mutex_hdl) { - (void) mutex_hdl; + (void)mutex_hdl; return true; // nothing to do } @@ -123,46 +122,45 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd #include "common/tusb_fifo.h" typedef struct { - tu_fifo_t ff; + uint16_t item_size; + tu_fifo_t ff; struct critical_section critsec; // osal_queue may be used in IRQs, so need critical section } osal_queue_def_t; -typedef osal_queue_def_t* osal_queue_t; +typedef osal_queue_def_t *osal_queue_t; // role device/host is used by OS NONE for mutex (disable usb isr) only -#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ - uint8_t _name##_buf[_depth*sizeof(_type)]; \ - osal_queue_def_t _name = { \ - .ff = TU_FIFO_INIT(_name##_buf, _depth, _type, false) \ - } +#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ + uint8_t _name##_buf[_depth * sizeof(_type)]; \ + osal_queue_def_t _name = {.item_size = sizeof(_type), .ff = TU_FIFO_INIT(_name##_buf, _depth * sizeof(_type), false)} -TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { +TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t *qdef) { critical_section_init(&qdef->critsec); - (void) tu_fifo_clear(&qdef->ff); - return (osal_queue_t) qdef; + tu_fifo_clear(&qdef->ff); + return (osal_queue_t)qdef; } TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_delete(osal_queue_t qhdl) { - osal_queue_def_t* qdef = (osal_queue_def_t*) qhdl; + osal_queue_def_t *qdef = (osal_queue_def_t *)qhdl; critical_section_deinit(&qdef->critsec); return true; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec) { - (void) msec; // not used, always behave as msec = 0 +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void *data, uint32_t msec) { + (void)msec; // not used, always behave as msec = 0 critical_section_enter_blocking(&qhdl->critsec); - bool success = tu_fifo_read(&qhdl->ff, data); + bool success = tu_fifo_read_n(&qhdl->ff, data, qhdl->item_size); critical_section_exit(&qhdl->critsec); return success; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void const* data, bool in_isr) { - (void) in_isr; +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, const void *data, bool in_isr) { + (void)in_isr; critical_section_enter_blocking(&qhdl->critsec); - bool success = tu_fifo_write(&qhdl->ff, data); + bool success = tu_fifo_write_n(&qhdl->ff, data, qhdl->item_size); critical_section_exit(&qhdl->critsec); return success; diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index ba40498e6..aacef691f 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -345,10 +345,9 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { } } -static uint16_t epin_write_tx_fifo(uint8_t rhport, uint8_t epnum) { - dwc2_regs_t* dwc2 = DWC2_REG(rhport); - dwc2_dep_t* const epin = &dwc2->ep[0][epnum]; - xfer_ctl_t* const xfer = XFER_CTL_BASE(epnum, TUSB_DIR_IN); +static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum) { + dwc2_dep_t *const epin = &dwc2->ep[0][epnum]; + xfer_ctl_t *const xfer = XFER_CTL_BASE(epnum, TUSB_DIR_IN); dwc2_ep_tsize_t tsiz = {.value = epin->tsiz}; const uint16_t remain_packets = tsiz.packet_count; @@ -438,7 +437,7 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin dep->diepctl = depctl.value; // enable endpoint if (dir == TUSB_DIR_IN && total_bytes != 0) { - const uint16_t xferred_bytes = epin_write_tx_fifo(rhport, epnum); + const uint16_t xferred_bytes = epin_write_tx_fifo(dwc2, epnum); // Enable TXFE interrupt if there are still data to be sent // EP0 only sends one packet at a time, so no need to check for EP0 @@ -689,9 +688,6 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to // into the USB buffer! bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t total_bytes, bool is_isr) { (void) is_isr; - // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1 - TU_ASSERT(ff->item_size == 1); - uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); @@ -893,7 +889,8 @@ static void handle_rxflvl_irq(uint8_t rhport) { if (byte_count != 0) { // Read packet off RxFIFO if (xfer->ff != NULL) { - tu_fifo_write_n_access_mode(xfer->ff, (const void *)(uintptr_t)rx_fifo, byte_count, TU_FIFO_FIXED_ADDR_RW32); + tu_fifo_write_n_access_mode(xfer->ff, (const void *)(uintptr_t)rx_fifo, byte_count, TU_FIFO_FIXED_ADDR_RW32, + 0); } else { dfifo_read_packet(dwc2, xfer->buffer, byte_count); xfer->buffer += byte_count; @@ -967,7 +964,7 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep // - 64 bytes or // - Half/Empty of TX FIFO size (configured by GAHBCFG.TXFELVL) if (diepint_bm.txfifo_empty && tu_bit_test(dwc2->diepempmsk, epnum)) { - epin_write_tx_fifo(rhport, epnum); + epin_write_tx_fifo(dwc2, epnum); // Turn off TXFE if all bytes are written. dwc2_ep_tsize_t tsiz = {.value = epin->tsiz}; diff --git a/src/tusb.c b/src/tusb.c index 8117c3e3e..ed254a10b 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -316,7 +316,7 @@ bool tu_edpt_stream_init(tu_edpt_stream_t *s, bool is_host, bool is_tx, bool ove #endif s->is_host = is_host; - tu_fifo_config(&s->ff, ff_buf, ff_bufsize, 1, overwritable); + tu_fifo_config(&s->ff, ff_buf, ff_bufsize, overwritable); #if OSAL_MUTEX_REQUIRED if (ff_buf != NULL && ff_bufsize > 0) { diff --git a/src/tusb_option.h b/src/tusb_option.h index 1dc920d84..de54d33d8 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -307,6 +307,7 @@ #if defined(TUP_USBIP_DWC2) #if CFG_TUD_DWC2_SLAVE_ENABLE && !CFG_TUD_DWC2_DMA_ENABLE #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 + #define CFG_TUSB_FIFO_MULTI_BYTES_ACCESS 1 #endif #if CFG_TUH_DWC2_SLAVE_ENABLE && !CFG_TUH_DWC2_DMA_ENABLE diff --git a/test/unit-test/project.yml b/test/unit-test/project.yml index 3968faaef..d7646ca7f 100644 --- a/test/unit-test/project.yml +++ b/test/unit-test/project.yml @@ -129,6 +129,7 @@ :test: - _UNITY_TEST_ - CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH=32 + - CFG_TUSB_FIFO_MULTI_BYTES_ACCESS=1 :release: [] # Enable to inject name of a test as a unique compilation symbol into its respective executable build. diff --git a/test/unit-test/test/test_fifo.c b/test/unit-test/test/test_fifo.c index 35bbeaa62..d0e3c2d37 100644 --- a/test/unit-test/test/test_fifo.c +++ b/test/unit-test/test/test_fifo.c @@ -32,7 +32,7 @@ #define FIFO_SIZE 64 uint8_t tu_ff_buf[FIFO_SIZE * sizeof(uint8_t)]; -tu_fifo_t tu_ff = TU_FIFO_INIT(tu_ff_buf, FIFO_SIZE, uint8_t, false); +tu_fifo_t tu_ff = TU_FIFO_INIT(tu_ff_buf, FIFO_SIZE, false); tu_fifo_t *ff = &tu_ff; tu_fifo_buffer_info_t info; @@ -68,34 +68,6 @@ void test_normal(void) { } } -void test_item_size(void) { - uint8_t ff4_buf[FIFO_SIZE * sizeof(uint32_t)]; - tu_fifo_t ff4 = TU_FIFO_INIT(ff4_buf, FIFO_SIZE, uint32_t, false); - - uint32_t data4[2 * FIFO_SIZE]; - for (uint32_t i = 0; i < sizeof(data4) / 4; i++) { - data4[i] = i; - } - - // fill up fifo - tu_fifo_write_n(&ff4, data4, FIFO_SIZE); - - uint32_t rd_buf4[FIFO_SIZE]; - uint16_t rd_count; - - // read 0 -> 4 - rd_count = tu_fifo_read_n(&ff4, rd_buf4, 5); - TEST_ASSERT_EQUAL(5, rd_count); - TEST_ASSERT_EQUAL_UINT32_ARRAY(data4, rd_buf4, rd_count); // 0 -> 4 - - tu_fifo_write_n(&ff4, data4 + FIFO_SIZE, 5); - - // read all 5 -> 68 - rd_count = tu_fifo_read_n(&ff4, rd_buf4, FIFO_SIZE); - TEST_ASSERT_EQUAL(FIFO_SIZE, rd_count); - TEST_ASSERT_EQUAL_UINT32_ARRAY(data4 + 5, rd_buf4, rd_count); // 5 -> 68 -} - void test_read_n(void) { uint16_t rd_count; @@ -362,7 +334,7 @@ void test_rd_idx_wrap(void) { uint8_t buf[10]; uint8_t dst[10]; - tu_fifo_config(&ff10, buf, 10, 1, 1); + tu_fifo_config(&ff10, buf, 10, 1); uint16_t n; @@ -431,7 +403,7 @@ void test_write_n_fixed_addr_rw32_nowrap(void) { for (uint8_t n = 1; n <= 8; n++) { tu_fifo_clear(ff); - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, TU_FIFO_FIXED_ADDR_RW32); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, sizeof(uint32_t), 0); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); @@ -453,7 +425,7 @@ void test_write_n_fixed_addr_rw32_wrapped(void) { ff->wr_idx = FIFO_SIZE - 3; ff->rd_idx = FIFO_SIZE - 3; - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, TU_FIFO_FIXED_ADDR_RW32); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, sizeof(uint32_t), 0); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); -- cgit v1.3.1 From d61ed922206148081afa70803ad717858bc5b756 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Dec 2025 01:07:52 +0700 Subject: re-branding fixed address fifo read/write to stride mode --- src/common/tusb_fifo.c | 205 +++++++++++++++---------------- src/common/tusb_fifo.h | 62 ++++------ src/portable/microchip/samg/dcd_samg.c | 4 +- src/portable/nuvoton/nuc505/dcd_nuc505.c | 4 +- src/portable/synopsys/dwc2/dcd_dwc2.c | 5 +- src/tusb_option.h | 3 +- test/unit-test/project.yml | 4 +- test/unit-test/test/test_fifo.c | 8 +- 8 files changed, 142 insertions(+), 153 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 7822b7aae..a347fbee3 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -113,87 +113,92 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { // Pull & Push // copy data to/from fifo without updating read/write pointers //--------------------------------------------------------------------+ -#if CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH - #if CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH == 32 - #define fixed_unaligned_write tu_unaligned_write32 - #define fixed_unaligned_read tu_unaligned_read32 -typedef uint32_t fixed_access_item_t; - #elif CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH == 16 - #define fixed_unaligned_write tu_unaligned_write16 - #define fixed_unaligned_read tu_unaligned_read16 -typedef uint16_t fixed_access_item_t; +#if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE + #if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE == 4 + #define stride_unaligned_write tu_unaligned_write32 + #define stride_unaligned_read tu_unaligned_read32 +typedef uint32_t stride_item_t; + #elif CFG_TUSB_FIFO_ACCESS_DATA_STRIDE == 2 + #define stride_unaligned_write tu_unaligned_write16 + #define stride_unaligned_read tu_unaligned_read16 +typedef uint16_t stride_item_t; #endif enum { - FIXED_ACCESS_REMAINDER_MASK = sizeof(fixed_access_item_t) - 1u + STRIDE_REMAIN_MASK = sizeof(stride_item_t) - 1u }; // Copy to fifo from fixed address buffer (usually a rx register) with TU_FIFO_FIXED_ADDR_RW32 mode -static void ff_push_access_mode(uint8_t *ff_buf, const volatile fixed_access_item_t *reg_rx, uint16_t len, - uint8_t data_stride, uint8_t addr_stride) { - (void)data_stride; - (void)addr_stride; - // Reading full available 16/32-bit data from const app address - uint16_t n_items = len / sizeof(fixed_access_item_t); +static void ff_push_stride(uint8_t *ff_buf, const volatile stride_item_t *src, uint16_t len) { + // Reading full available 16/32-bit src and write to fifo + uint16_t n_items = len >> (CFG_TUSB_FIFO_ACCESS_DATA_STRIDE >> 1); // len / data_stride; while (n_items--) { - const fixed_access_item_t tmp = *reg_rx; - fixed_unaligned_write(ff_buf, tmp); - ff_buf += sizeof(fixed_access_item_t); + const stride_item_t tmp = *src; + stride_unaligned_write(ff_buf, tmp); + ff_buf += sizeof(stride_item_t); + + #if CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE + src = (const volatile uint8_t *)src + addr_stride; + #endif } - // Read the remaining 1 byte (16bit) or 1-3 bytes (32bit) from const app address - const uint8_t bytes_rem = len & FIXED_ACCESS_REMAINDER_MASK; + // Read the remaining 1 byte (16bit) or 1-3 bytes (32bit) + const uint8_t bytes_rem = len & STRIDE_REMAIN_MASK; if (bytes_rem) { - const fixed_access_item_t tmp = *reg_rx; + const stride_item_t tmp = *src; memcpy(ff_buf, &tmp, bytes_rem); } } // Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode -static void ff_pull_fixed_addr(volatile fixed_access_item_t *reg_tx, const uint8_t *ff_buf, uint16_t len) { - // Write full available 32 bit words to const address - uint16_t n_itmes = len / sizeof(fixed_access_item_t); - while (n_itmes--) { - *reg_tx = fixed_unaligned_read(ff_buf); - ff_buf += sizeof(fixed_access_item_t); +static void ff_pull_stride(volatile stride_item_t *dest, const uint8_t *ff_buf, uint16_t len) { + // Write full available 16/32 bit words to dest + uint16_t n_items = len >> (CFG_TUSB_FIFO_ACCESS_DATA_STRIDE >> 1); // len / data_stride; + while (n_items--) { + *dest = stride_unaligned_read(ff_buf); + ff_buf += sizeof(stride_item_t); + + #if CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE + dest = (const volatile uint8_t *)dest + addr_stride; + #endif } // Write the remaining 1 byte (16bit) or 1-3 bytes (32bit) - const uint8_t bytes_rem = len & FIXED_ACCESS_REMAINDER_MASK; + const uint8_t bytes_rem = len & STRIDE_REMAIN_MASK; if (bytes_rem) { - fixed_access_item_t tmp = 0u; + stride_item_t tmp = 0u; memcpy(&tmp, ff_buf, bytes_rem); - *reg_tx = tmp; + *dest = tmp; } } #endif // send n items to fifo WITHOUT updating write pointer -static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, uint8_t data_stride, - uint8_t addr_stride) { +static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, bool stride_mode) { + (void)stride_mode; uint16_t lin_bytes = f->depth - wr_ptr; uint16_t wrap_bytes = n - lin_bytes; uint8_t *ff_buf = f->buffer + wr_ptr; -#if CFG_TUSB_FIFO_MULTI_BYTES_ACCESS - if (data_stride > 1) { - const volatile fixed_access_item_t *reg_rx = (volatile const fixed_access_item_t *)app_buf; +#if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE + if (stride_mode) { + const volatile stride_item_t *stride_src = (const volatile stride_item_t *)app_buf; if (n <= lin_bytes) { - // Linear only - ff_push_access_mode(ff_buf, reg_rx, n, data_stride, addr_stride); + // Linear only case + ff_push_stride(ff_buf, stride_src, n); } else { - // Wrap around + // Wrap around case // Write full words to linear part of buffer - uint16_t lin_nitems_bytes = lin_bytes & ~FIXED_ACCESS_REMAINDER_MASK; - ff_push_access_mode(ff_buf, reg_rx, lin_nitems_bytes, data_stride, addr_stride); + uint16_t lin_nitems_bytes = lin_bytes & ~STRIDE_REMAIN_MASK; + ff_push_stride(ff_buf, stride_src, lin_nitems_bytes); ff_buf += lin_nitems_bytes; // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary - const uint8_t rem = lin_bytes & FIXED_ACCESS_REMAINDER_MASK; + const uint8_t rem = lin_bytes & STRIDE_REMAIN_MASK; if (rem > 0) { - const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(fixed_access_item_t) - rem); - const fixed_access_item_t tmp = *reg_rx; + const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(stride_item_t) - rem); + const stride_item_t tmp = *stride_src; tu_scatter_write32(tmp, ff_buf, rem, f->buffer, remrem); wrap_bytes -= remrem; @@ -204,7 +209,7 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 // Write data wrapped part if (wrap_bytes > 0) { - ff_push_access_mode(ff_buf, reg_rx, wrap_bytes, data_stride, addr_stride); + ff_push_stride(ff_buf, stride_src, wrap_bytes); } } } else @@ -212,10 +217,10 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 { // single byte access if (n <= lin_bytes) { - // Linear only + // Linear only case memcpy(ff_buf, app_buf, n); } else { - // Wrap around + // Wrap around case memcpy(ff_buf, app_buf, lin_bytes); // linear part memcpy(f->buffer, ((const uint8_t *)app_buf) + lin_bytes, wrap_bytes); // wrapped part } @@ -223,63 +228,58 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 } // get n items from fifo WITHOUT updating read pointer -static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, tu_fifo_access_mode_t copy_mode) { +static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, bool stride_mode) { + (void)stride_mode; uint16_t lin_bytes = f->depth - rd_ptr; uint16_t wrap_bytes = n - lin_bytes; // only used if wrapped const uint8_t *ff_buf = f->buffer + rd_ptr; - switch (copy_mode) { - case TU_FIFO_INC_ADDR_RW8: - if (n <= lin_bytes) { - // Linear only - memcpy(app_buf, ff_buf, n); - } else { - // Wrap around - memcpy(app_buf, ff_buf, lin_bytes); // linear part - memcpy((uint8_t *)app_buf + lin_bytes, f->buffer, wrap_bytes); // wrapped part - } - break; +#if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE + if (stride_mode) { + volatile stride_item_t *stride_dst = (volatile stride_item_t *)app_buf; + + if (n <= lin_bytes) { + // Linear only case + ff_pull_stride(stride_dst, ff_buf, n); + } else { + // Wrap around case + + // Read full words from linear part + uint16_t lin_nitems_bytes = lin_bytes & ~STRIDE_REMAIN_MASK; + ff_pull_stride(stride_dst, ff_buf, lin_nitems_bytes); + ff_buf += lin_nitems_bytes; + + // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary + const uint8_t rem = lin_bytes & STRIDE_REMAIN_MASK; + if (rem > 0) { + const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(stride_item_t) - rem); + const stride_item_t scatter = (stride_item_t)tu_scatter_read32(ff_buf, rem, f->buffer, remrem); -#ifdef CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH - case TU_FIFO_FIXED_ADDR_RW32: { - volatile fixed_access_item_t *reg_tx = (volatile fixed_access_item_t *)app_buf; + *stride_dst = scatter; - if (n <= lin_bytes) { - // Linear only - ff_pull_fixed_addr(reg_tx, ff_buf, n); + wrap_bytes -= remrem; + ff_buf = f->buffer + remrem; // wrap around } else { - // Wrap around case - - // Read full words from linear part - uint16_t lin_nitems_bytes = lin_bytes & ~FIXED_ACCESS_REMAINDER_MASK; - ff_pull_fixed_addr(reg_tx, ff_buf, lin_nitems_bytes); - ff_buf += lin_nitems_bytes; - - // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary - const uint8_t rem = lin_bytes & FIXED_ACCESS_REMAINDER_MASK; - if (rem > 0) { - const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(fixed_access_item_t) - rem); - const fixed_access_item_t scatter = (fixed_access_item_t)tu_scatter_read32(ff_buf, rem, f->buffer, remrem); - - *reg_tx = scatter; - - wrap_bytes -= remrem; - ff_buf = f->buffer + remrem; // wrap around - } else { - ff_buf = f->buffer; // wrap around to beginning - } - - // Read data wrapped part - if (wrap_bytes > 0) { - ff_pull_fixed_addr(reg_tx, ff_buf, wrap_bytes); - } + ff_buf = f->buffer; // wrap around to beginning + } + + // Read data wrapped part + if (wrap_bytes > 0) { + ff_pull_stride(stride_dst, ff_buf, wrap_bytes); } - break; } + } else #endif - - default: - break; // unknown mode + { + // single byte access + if (n <= lin_bytes) { + // Linear only + memcpy(app_buf, ff_buf, n); + } else { + // Wrap around + memcpy(app_buf, ff_buf, lin_bytes); // linear part + memcpy((uint8_t *)app_buf + lin_bytes, f->buffer, wrap_bytes); // wrapped part + } } } @@ -332,7 +332,7 @@ static uint16_t correct_read_index(tu_fifo_t *f, uint16_t wr_idx) { // Works on local copies of w and r // Must be protected by read mutex since in case of an overflow read pointer gets modified uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, - tu_fifo_access_mode_t access_mode) { + bool stride_mode) { uint16_t count = tu_ff_overflow_count(f->depth, wr_idx, rd_idx); if (count == 0) { return 0; // nothing to peek @@ -349,7 +349,7 @@ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, ui } const uint16_t rd_ptr = idx2ptr(f->depth, rd_idx); - ff_pull_n(f, p_buffer, n, rd_ptr, access_mode); + ff_pull_n(f, p_buffer, n, rd_ptr, stride_mode); return n; } @@ -357,17 +357,17 @@ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, ui // Read n items without removing it from the FIFO, correct read pointer if overflowed uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n) { ff_lock(f->mutex_rd); - const uint16_t ret = tu_fifo_peek_n_access_mode(f, p_buffer, n, f->wr_idx, f->rd_idx, TU_FIFO_INC_ADDR_RW8); + const uint16_t ret = tu_fifo_peek_n_access_mode(f, p_buffer, n, f->wr_idx, f->rd_idx, false); ff_unlock(f->mutex_rd); return ret; } // Read n items from fifo with access mode -uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, tu_fifo_access_mode_t access_mode) { +uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, bool stride_mode) { ff_lock(f->mutex_rd); // Peek the data: f->rd_idx might get modified in case of an overflow so we can not use a local variable - n = tu_fifo_peek_n_access_mode(f, buffer, n, f->wr_idx, f->rd_idx, access_mode); + n = tu_fifo_peek_n_access_mode(f, buffer, n, f->wr_idx, f->rd_idx, stride_mode); f->rd_idx = advance_index(f->depth, f->rd_idx, n); ff_unlock(f->mutex_rd); @@ -375,8 +375,7 @@ uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, tu_f } // Write n items to fifo with access mode -uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, uint8_t data_stride, - uint8_t addr_stride) { +uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, bool stride_mode) { if (n == 0) { return 0; } @@ -402,7 +401,7 @@ uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, // function! Since it would end up in a race condition with read functions! if (n >= f->depth) { // Only copy last part - if (data_stride == TU_FIFO_INC_ADDR_RW8) { + if (!stride_mode) { buf8 += (n - f->depth); } else { // TODO should read from hw fifo to discard data, however reading an odd number could @@ -438,7 +437,7 @@ uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, const uint16_t wr_ptr = idx2ptr(f->depth, wr_idx); TU_LOG(TU_FIFO_DBG, "actual_n = %u, wr_ptr = %u", n, wr_ptr); - ff_push_n(f, buf8, n, wr_ptr, data_stride, addr_stride); + ff_push_n(f, buf8, n, wr_ptr, stride_mode); f->wr_idx = advance_index(f->depth, wr_idx, n); TU_LOG(TU_FIFO_DBG, "\tnew_wr = %u\r\n", f->wr_idx); diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index b48cf4cea..7623d4c4f 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -32,35 +32,31 @@ extern "C" { #endif -// Due to the use of unmasked pointers, this FIFO does not suffer from losing -// one item slice. Furthermore, write and read operations are completely -// decoupled as write and read functions do not modify a common state. Henceforth, -// writing or reading from the FIFO within an ISR is safe as long as no other -// process (thread or ISR) interferes. -// Also, this FIFO is ready to be used in combination with a DMA as the write and -// read pointers can be updated from within a DMA ISR. Overflows are detectable -// within a certain number (see tu_fifo_overflow()). - #include "common/tusb_common.h" #include "osal/osal.h" -// mutex is only needed for RTOS -// for OS None, we don't get preempted +//--------------------------------------------------------------------+ +// Configuration +//--------------------------------------------------------------------+ +// mutex is only needed for RTOS. For OS None, we don't get preempted #define CFG_FIFO_MUTEX OSAL_MUTEX_REQUIRED -#if CFG_TUD_EDPT_DEDICATED_HWFIFO || CFG_TUH_EDPT_DEDICATED_HWFIFO - #ifndef CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH - #define CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH 32 - #endif +#ifndef CFG_TUSB_FIFO_ACCESS_DATA_STRIDE + #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 0 #endif -#ifndef CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH - #define CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH 0 +#ifndef CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE + #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 0 #endif -#ifndef CFG_TUSB_FIFO_MULTI_BYTES_ACCESS - #define CFG_TUSB_FIFO_MULTI_BYTES_ACCESS 0 -#endif +// Due to the use of unmasked pointers, this FIFO does not suffer from losing +// one item slice. Furthermore, write and read operations are completely +// decoupled as write and read functions do not modify a common state. Henceforth, +// writing or reading from the FIFO within an ISR is safe as long as no other +// process (thread or ISR) interferes. +// Also, this FIFO is ready to be used in combination with a DMA as the write and +// read pointers can be updated from within a DMA ISR. Overflows are detectable +// within a certain number (see tu_fifo_overflow()). /* Write/Read "pointer" is in the range of: 0 .. depth - 1, and is used to get the fifo data. * Write/Read "index" is always in the range of: 0 .. 2*depth-1 @@ -122,6 +118,7 @@ typedef struct { uint8_t *buffer; // buffer pointer uint16_t depth; // max items bool overwritable; // ovwerwritable when full + // 1 byte padding here volatile uint16_t wr_idx; // write index TODO maybe can drop volatile volatile uint16_t rd_idx; // read index @@ -151,12 +148,10 @@ typedef struct { uint8_t _name##_buf[_depth]; \ tu_fifo_t _name = TU_FIFO_INIT(_name##_buf, _depth, _overwritable) -// Write modes intended to allow special read and write functions to be able to -// copy data to and from USB hardware FIFOs as needed for e.g. STM32s and others -typedef enum { - TU_FIFO_INC_ADDR_RW8, // increased address read/write by bytes - normal (default) mode - TU_FIFO_FIXED_ADDR_RW32, // fixed address read/write by 2/4 bytes (items). -} tu_fifo_access_mode_t; +// Moving data from tusb_fifo <-> USB hardware FIFOs e.g. STM32s need to use a special stride mode which reads/writes +// data in 2/4 byte chunks from/to a fixed address (USB FIFO register) instead of incrementing the address. For this use +// read/write access_mode with stride_mode = true. The STRIPE DATA and ADDR stride must be configured with +// CFG_TUSB_FIFO_ACCESS_DATA_STRIDE and CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE //--------------------------------------------------------------------+ // Setup API @@ -196,7 +191,7 @@ void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info); // peek() will correct/re-index read pointer in case of an overflowed fifo to form a full fifo //--------------------------------------------------------------------+ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, - tu_fifo_access_mode_t access_mode); + bool stride_mode); bool tu_fifo_peek(tu_fifo_t *f, void *p_buffer); uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n); @@ -204,14 +199,10 @@ uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n); // Read API // peek() + advance read index //--------------------------------------------------------------------+ -uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, tu_fifo_access_mode_t access_mode); +uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, bool stride_mode); bool tu_fifo_read(tu_fifo_t *f, void *buffer); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n) { - return tu_fifo_read_n_access_mode(f, buffer, n, TU_FIFO_INC_ADDR_RW8); -} - -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_n_fixed_addr(tu_fifo_t *f, void *buffer, uint16_t n) { - return tu_fifo_read_n_access_mode(f, buffer, n, TU_FIFO_FIXED_ADDR_RW32); + return tu_fifo_read_n_access_mode(f, buffer, n, false); } // discard first n items from fifo i.e advance read pointer by n with mutex @@ -221,11 +212,10 @@ uint16_t tu_fifo_discard_n(tu_fifo_t *f, uint16_t n); //--------------------------------------------------------------------+ // Write API //--------------------------------------------------------------------+ -uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, uint8_t data_stride, - uint8_t addr_stride); +uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, bool stride_mode); bool tu_fifo_write(tu_fifo_t *f, const void *data); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n) { - return tu_fifo_write_n_access_mode(f, data, n, 1, 1); + return tu_fifo_write_n_access_mode(f, data, n, false); } //--------------------------------------------------------------------+ diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c index 1faac2aa8..4115eecc5 100644 --- a/src/portable/microchip/samg/dcd_samg.c +++ b/src/portable/microchip/samg/dcd_samg.c @@ -437,7 +437,7 @@ void dcd_int_handler(uint8_t rhport) // write to EP fifo #if 0 // TODO support dcd_edpt_xfer_fifo if (xfer->ff) { - tu_fifo_read_n_access_mode(xfer->ff, (void *) &UDP->UDP_FDR[epnum], xact_len, TU_FIFO_FIXED_ADDR_RW32); + tu_fifo_read_n_access_mode(xfer->ff, (void *) &UDP->UDP_FDR[epnum], xact_len, true); } else #endif @@ -471,7 +471,7 @@ void dcd_int_handler(uint8_t rhport) // Read from EP fifo #if 0 // TODO support dcd_edpt_xfer_fifo API if (xfer->ff) { - tu_fifo_write_n_access_mode(xfer->ff, (const void *) &UDP->UDP_FDR[epnum], xact_len, TU_FIFO_FIXED_ADDR_RW32); + tu_fifo_write_n_access_mode(xfer->ff, (const void *) &UDP->UDP_FDR[epnum], xact_len, true); } else #endif diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c index 91b876718..ca17d6251 100644 --- a/src/portable/nuvoton/nuc505/dcd_nuc505.c +++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c @@ -194,7 +194,7 @@ static void dcd_userEP_in_xfer(struct xfer_ctl_t *xfer, USBD_EP_T *ep) /* provided buffers are thankfully 32-bit aligned, allowing most data to be transferred as 32-bit */ #if 0 // TODO support dcd_edpt_xfer_fifo API if (xfer->ff) { - tu_fifo_read_n_access_mode(xfer->ff, (void *) (&ep->EPDAT_BYTE), bytes_now, TU_FIFO_FIXED_ADDR_RW32); + tu_fifo_read_n_access_mode(xfer->ff, (void *) (&ep->EPDAT_BYTE), bytes_now, true); } else #endif @@ -696,7 +696,7 @@ void dcd_int_handler(uint8_t rhport) /* copy the data from the PC to the previously provided buffer */ #if 0 // TODO support dcd_edpt_xfer_fifo API if (xfer->ff) { - tu_fifo_write_n_access_mode(xfer->ff, (const void *) &ep->EPDAT_BYTE, tu_min16(available_bytes, xfer->total_bytes - xfer->out_bytes_so_far), TU_FIFO_FIXED_ADDR_RW32); + tu_fifo_write_n_access_mode(xfer->ff, (const void *) &ep->EPDAT_BYTE, tu_min16(available_bytes, xfer->total_bytes - xfer->out_bytes_so_far), true); } else #endif diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index aacef691f..8c97eaa2f 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -367,7 +367,7 @@ static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum) { // Push packet to Tx-FIFO if (xfer->ff) { volatile uint32_t* tx_fifo = dwc2->fifo[epnum]; - tu_fifo_read_n_access_mode(xfer->ff, (void *)(uintptr_t)tx_fifo, xact_bytes, TU_FIFO_FIXED_ADDR_RW32); + tu_fifo_read_n_access_mode(xfer->ff, (void *)(uintptr_t)tx_fifo, xact_bytes, true); total_bytes_written += xact_bytes; } else { dfifo_write_packet(dwc2, epnum, xfer->buffer, xact_bytes); @@ -889,8 +889,7 @@ static void handle_rxflvl_irq(uint8_t rhport) { if (byte_count != 0) { // Read packet off RxFIFO if (xfer->ff != NULL) { - tu_fifo_write_n_access_mode(xfer->ff, (const void *)(uintptr_t)rx_fifo, byte_count, TU_FIFO_FIXED_ADDR_RW32, - 0); + tu_fifo_write_n_access_mode(xfer->ff, (const void *)(uintptr_t)rx_fifo, byte_count, true); } else { dfifo_read_packet(dwc2, xfer->buffer, byte_count); xfer->buffer += byte_count; diff --git a/src/tusb_option.h b/src/tusb_option.h index de54d33d8..a0f4e7057 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -307,7 +307,8 @@ #if defined(TUP_USBIP_DWC2) #if CFG_TUD_DWC2_SLAVE_ENABLE && !CFG_TUD_DWC2_DMA_ENABLE #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #define CFG_TUSB_FIFO_MULTI_BYTES_ACCESS 1 + #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 4 // 32bit access + #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 0 // fixed hwfifo address #endif #if CFG_TUH_DWC2_SLAVE_ENABLE && !CFG_TUH_DWC2_DMA_ENABLE diff --git a/test/unit-test/project.yml b/test/unit-test/project.yml index d7646ca7f..ea20c5f72 100644 --- a/test/unit-test/project.yml +++ b/test/unit-test/project.yml @@ -128,8 +128,8 @@ :defines: :test: - _UNITY_TEST_ - - CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH=32 - - CFG_TUSB_FIFO_MULTI_BYTES_ACCESS=1 + - CFG_TUSB_FIFO_ACCESS_DATA_STRIDE=4 + - CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE=0 :release: [] # Enable to inject name of a test as a unique compilation symbol into its respective executable build. diff --git a/test/unit-test/test/test_fifo.c b/test/unit-test/test/test_fifo.c index d0e3c2d37..453930a2f 100644 --- a/test/unit-test/test/test_fifo.c +++ b/test/unit-test/test/test_fifo.c @@ -403,7 +403,7 @@ void test_write_n_fixed_addr_rw32_nowrap(void) { for (uint8_t n = 1; n <= 8; n++) { tu_fifo_clear(ff); - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, sizeof(uint32_t), 0); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, true); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); @@ -425,7 +425,7 @@ void test_write_n_fixed_addr_rw32_wrapped(void) { ff->wr_idx = FIFO_SIZE - 3; ff->rd_idx = FIFO_SIZE - 3; - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, sizeof(uint32_t), 0); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, true); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); @@ -445,7 +445,7 @@ void test_read_n_fixed_addr_rw32_nowrap(void) { tu_fifo_write_n(ff, pattern, 8); uint32_t reg = 0; - uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, TU_FIFO_FIXED_ADDR_RW32); + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, true); TEST_ASSERT_EQUAL(n, read_cnt); TEST_ASSERT_EQUAL(8 - n, tu_fifo_count(ff)); @@ -469,7 +469,7 @@ void test_read_n_fixed_addr_rw32_wrapped(void) { } uint32_t reg = 0; - uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, TU_FIFO_FIXED_ADDR_RW32); + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, true); TEST_ASSERT_EQUAL(n, read_cnt); TEST_ASSERT_EQUAL(0, tu_fifo_count(ff)); -- cgit v1.3.1 From f20ad05d71919dd5656aa7f92b9e27582744348a Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Dec 2025 16:26:24 +0700 Subject: update tu_fifo to work with fsdev hwfifo with increased address 16/32bit --- README.rst | 14 +- src/common/tusb_fifo.c | 10 +- src/common/tusb_fifo.h | 6 + src/common/tusb_mcu.h | 145 ++++++++++---------- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 12 +- src/portable/st/stm32_fsdev/fsdev_at32.h | 1 - src/portable/st/stm32_fsdev/fsdev_ch32.h | 1 - src/portable/st/stm32_fsdev/fsdev_stm32.h | 186 ++++++++++++-------------- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 +- src/tusb_option.h | 16 ++- test/unit-test/project.yml | 1 + 11 files changed, 205 insertions(+), 191 deletions(-) diff --git a/README.rst b/README.rst index da1f49fcd..4ab991bf5 100644 --- a/README.rst +++ b/README.rst @@ -139,7 +139,7 @@ Supported CPUs | | MAX32 650, 666, 690, | ✔ | | ✔ | musb | 1-dir ep | | | MAX78002 | | | | | | +--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ -| Artery AT32 | F403a_407, F413 | ✔ | | | fsdev | Packet SRAM 512 | +| Artery AT32 | F403a_407, F413 | ✔ | | | fsdev | 512 USB RAM | | +-----------------------------+--------+------+-----------+------------------------+--------------------+ | | F415, F435_437, F423, F425 | ✔ | ✔ | | dwc2 | | | +-----------------------------+--------+------+-----------+------------------------+--------------------+ @@ -221,25 +221,25 @@ Supported CPUs +--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ | ST STM32 | F0, F3, L0, L1, L5, WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | | +----+------------------------+--------+------+-----------+------------------------+--------------------+ -| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | Packet SRAM 512 | +| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | 512 USB RAM | | | +------------------------+--------+------+-----------+------------------------+--------------------+ | | | 105, 107 | ✔ | ✔ | ✖ | dwc2 | | | +----+------------------------+--------+------+-----------+------------------------+--------------------+ | | F2, F4, F7, H7, H7RS | ✔ | ✔ | ✔ | dwc2 | | | +-----------------------------+--------+------+-----------+------------------------+--------------------+ -| | C0, G0, H5, U3 | ✔ | ✔ | ✖ | stm32_fsdev | Packet SRAM 2KB | +| | C0, G0, H5, U3 | ✔ | ✔ | ✖ | stm32_fsdev | 2KB USB RAM | | +-----------------------------+--------+------+-----------+------------------------+--------------------+ -| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | Packet SRAM 1KB | +| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | 1KB USB RAM | | +----+------------------------+--------+------+-----------+------------------------+--------------------+ -| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | Packet SRAM 1KB | +| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | 1KB USB RAM | | | +------------------------+--------+------+-----------+------------------------+--------------------+ | | | 4x5, 4x6, 4+ | ✔ | ✔ | ✖ | dwc2 | | | +----+------------------------+--------+------+-----------+------------------------+--------------------+ | | N6 | ✔ | ✔ | ✔ | dwc2 | | | +-----------------------------+--------+------+-----------+------------------------+--------------------+ -| | U0 | ✔ | ✖ | ✖ | stm32_fsdev | Packet SRAM 1KB | +| | U0 | ✔ | ✖ | ✖ | stm32_fsdev | 1KB USB RAM | | +----+------------------------+--------+------+-----------+------------------------+--------------------+ -| | U5 | 535, 545 | ✔ | ✔ | ✖ | stm32_fsdev | Packet SRAM 2KB | +| | U5 | 535, 545 | ✔ | ✔ | ✖ | stm32_fsdev | 2KB USB RAM | | | +------------------------+--------+------+-----------+------------------------+--------------------+ | | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | | | +------------------------+--------+------+-----------+------------------------+--------------------+ diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index a347fbee3..bc4ee180c 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -113,7 +113,7 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { // Pull & Push // copy data to/from fifo without updating read/write pointers //--------------------------------------------------------------------+ -#if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE +#if CFG_TUD_EDPT_DEDICATED_HWFIFO #if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE == 4 #define stride_unaligned_write tu_unaligned_write32 #define stride_unaligned_read tu_unaligned_read32 @@ -138,7 +138,7 @@ static void ff_push_stride(uint8_t *ff_buf, const volatile stride_item_t *src, u ff_buf += sizeof(stride_item_t); #if CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE - src = (const volatile uint8_t *)src + addr_stride; + src = (const volatile stride_item_t *)((uintptr_t)src + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); #endif } @@ -159,7 +159,7 @@ static void ff_pull_stride(volatile stride_item_t *dest, const uint8_t *ff_buf, ff_buf += sizeof(stride_item_t); #if CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE - dest = (const volatile uint8_t *)dest + addr_stride; + dest = (volatile stride_item_t *)((uintptr_t)dest + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); #endif } @@ -180,7 +180,7 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 uint16_t wrap_bytes = n - lin_bytes; uint8_t *ff_buf = f->buffer + wr_ptr; -#if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE +#if CFG_TUD_EDPT_DEDICATED_HWFIFO if (stride_mode) { const volatile stride_item_t *stride_src = (const volatile stride_item_t *)app_buf; if (n <= lin_bytes) { @@ -234,7 +234,7 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd uint16_t wrap_bytes = n - lin_bytes; // only used if wrapped const uint8_t *ff_buf = f->buffer + rd_ptr; -#if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE +#if CFG_TUD_EDPT_DEDICATED_HWFIFO if (stride_mode) { volatile stride_item_t *stride_dst = (volatile stride_item_t *)app_buf; diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 7623d4c4f..53c5f6e56 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -204,6 +204,9 @@ bool tu_fifo_read(tu_fifo_t *f, void *buffer); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n) { return tu_fifo_read_n_access_mode(f, buffer, n, false); } +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_to_hwfifo(tu_fifo_t *f, void *buffer, uint16_t n) { + return tu_fifo_read_n_access_mode(f, buffer, n, true); +} // discard first n items from fifo i.e advance read pointer by n with mutex // return number of discarded items @@ -217,6 +220,9 @@ bool tu_fifo_write(tu_fifo_t *f, const void *data); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n) { return tu_fifo_write_n_access_mode(f, data, n, false); } +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_from_hwfifo(tu_fifo_t *f, const void *data, uint16_t n) { + return tu_fifo_write_n_access_mode(f, data, n, true); +} //--------------------------------------------------------------------+ // Internal Helper Local diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 1e773bf96..f525a5a3d 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -176,10 +176,15 @@ //--------------------------------------------------------------------+ // ST //--------------------------------------------------------------------+ +#elif TU_CHECK_MCU(OPT_MCU_STM32C0) + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define FSDEV_PMA_SIZE 2048u + #elif TU_CHECK_MCU(OPT_MCU_STM32F0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define FSDEV_PMA_SIZE 1024u #elif TU_CHECK_MCU(OPT_MCU_STM32F1) // - F102, F103 use fsdev @@ -195,7 +200,7 @@ defined(STM32F103xE) || defined(STM32F103xG) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define FSDEV_PMA_SIZE 512u #else #error "Unsupported STM32F1 mcu" #endif @@ -210,7 +215,16 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F3) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + + #if defined(STM32F302xB) || defined(STM32F302xC) || defined(STM32F303xB) || defined(STM32F303xC) || \ + defined(STM32F373xC) + #define FSDEV_PMA_SIZE 512u + #elif defined(STM32F302x6) || defined(STM32F302x8) || defined(STM32F302xD) || defined(STM32F302xE) || \ + defined(STM32F303xD) || defined(STM32F303xE) + #define FSDEV_PMA_SIZE 1024u + #else + #error "Unsupported STM32F3 mcu" + #endif #elif TU_CHECK_MCU(OPT_MCU_STM32F4) #define TUP_USBIP_DWC2 @@ -236,6 +250,26 @@ #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 +#elif TU_CHECK_MCU(OPT_MCU_STM32G0) + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define FSDEV_PMA_SIZE 2048u + +#elif TU_CHECK_MCU(OPT_MCU_STM32G4) + // Device controller + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define FSDEV_PMA_SIZE 1024u + + // TypeC controller + #define TUP_USBIP_TYPEC_STM32 + #define TUP_TYPEC_RHPORTS_NUM 1 + +#elif TU_CHECK_MCU(OPT_MCU_STM32H5) + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define FSDEV_PMA_SIZE 2048u + #elif TU_CHECK_MCU(OPT_MCU_STM32H7) #include "stm32h7xx.h" #define TUP_USBIP_DWC2 @@ -250,35 +284,30 @@ #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 #endif -#elif TU_CHECK_MCU(OPT_MCU_STM32H5) - #define TUP_USBIP_FSDEV - #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 +#elif TU_CHECK_MCU(OPT_MCU_STM32H7RS, OPT_MCU_STM32N6) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 -#elif TU_CHECK_MCU(OPT_MCU_STM32G4) - // Device controller - #define TUP_USBIP_FSDEV - #define TUP_USBIP_FSDEV_STM32 + // FS has 6, HS has 9 + #define TUP_DCD_ENDPOINT_MAX 9 - // TypeC controller - #define TUP_USBIP_TYPEC_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_TYPEC_RHPORTS_NUM 1 + // MCU with on-chip HS Phy + #define TUP_RHPORT_HIGHSPEED 1 -#elif TU_CHECK_MCU(OPT_MCU_STM32G0) - #define TUP_USBIP_FSDEV - #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + // Enable dcache if DMA is enabled + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 -#elif TU_CHECK_MCU(OPT_MCU_STM32C0) +#elif TU_CHECK_MCU(OPT_MCU_STM32L0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define FSDEV_PMA_SIZE 1024u -#elif TU_CHECK_MCU(OPT_MCU_STM32L0, OPT_MCU_STM32L1) +#elif TU_CHECK_MCU(OPT_MCU_STM32L1) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define FSDEV_PMA_SIZE 512u #elif TU_CHECK_MCU(OPT_MCU_STM32L4) // - L4x2, L4x3 use fsdev @@ -295,28 +324,32 @@ defined(STM32L442xx) || defined(STM32L443xx) || defined(STM32L452xx) || defined(STM32L462xx) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define FSDEV_PMA_SIZE 1024u #else #error "Unsupported STM32L4 mcu" #endif -#elif TU_CHECK_MCU(OPT_MCU_STM32WB) +#elif TU_CHECK_MCU(OPT_MCU_STM32L5) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define FSDEV_PMA_SIZE (1024u) -#elif TU_CHECK_MCU(OPT_MCU_STM32WBA) - #define TUP_USBIP_DWC2 - #define TUP_USBIP_DWC2_STM32 - #define TUP_DCD_ENDPOINT_MAX 9 - #define TUP_RHPORT_HIGHSPEED 1 +#elif TU_CHECK_MCU(OPT_MCU_STM32U0) + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define FSDEV_PMA_SIZE 1024u + +#elif TU_CHECK_MCU(OPT_MCU_STM32U3) + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define FSDEV_PMA_SIZE 2048u #elif TU_CHECK_MCU(OPT_MCU_STM32U5) + // U535/545 use fsdev #if defined(STM32U535xx) || defined(STM32U545xx) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 - + #define FSDEV_PMA_SIZE 2048u #else #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 @@ -331,35 +364,16 @@ #endif #endif -#elif TU_CHECK_MCU(OPT_MCU_STM32L5) - #define TUP_USBIP_FSDEV - #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 - -#elif TU_CHECK_MCU(OPT_MCU_STM32U0) +#elif TU_CHECK_MCU(OPT_MCU_STM32WB) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define FSDEV_PMA_SIZE 1024u -#elif TU_CHECK_MCU(OPT_MCU_STM32U3) - #define TUP_USBIP_FSDEV - #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 - -#elif TU_CHECK_MCU(OPT_MCU_STM32H7RS, OPT_MCU_STM32N6) +#elif TU_CHECK_MCU(OPT_MCU_STM32WBA) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - - // FS has 6, HS has 9 - #define TUP_DCD_ENDPOINT_MAX 9 - - // MCU with on-chip HS Phy - #define TUP_RHPORT_HIGHSPEED 1 - - // Enable dcache if DMA is enabled - #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE - #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_RHPORT_HIGHSPEED 1 //--------------------------------------------------------------------+ // Sony @@ -566,6 +580,7 @@ #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_CH32 + #define FSDEV_PMA_SIZE 512u // default to FSDEV for device #if !defined(CFG_TUD_WCH_USBIP_USBFS) @@ -611,15 +626,10 @@ //--------------------------------------------------------------------+ // ArteryTek //--------------------------------------------------------------------+ -#elif TU_CHECK_MCU(OPT_MCU_AT32F403A_407) +#elif TU_CHECK_MCU(OPT_MCU_AT32F403A_407, OPT_MCU_AT32F413) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 - -#elif TU_CHECK_MCU(OPT_MCU_AT32F413) - #define TUP_USBIP_FSDEV - #define TUP_USBIP_FSDEV_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define FSDEV_PMA_SIZE 512u #elif TU_CHECK_MCU(OPT_MCU_AT32F415) #define TUP_USBIP_DWC2 @@ -655,10 +665,7 @@ #endif -//--------------------------------------------------------------------+ // External USB controller -//--------------------------------------------------------------------+ - #if defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 #ifndef CFG_TUH_MAX3421_ENDPOINT_TOTAL #define CFG_TUH_MAX3421_ENDPOINT_TOTAL (8 + 4 * (CFG_TUH_DEVICE_MAX - 1)) @@ -670,6 +677,10 @@ // Default Values //--------------------------------------------------------------------+ +#if defined(TUP_USBIP_FSDEV) + #define TUP_DCD_ENDPOINT_MAX 8 +#endif + #ifndef TUP_MCU_MULTIPLE_CORE #define TUP_MCU_MULTIPLE_CORE 0 #endif diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 087639d4b..0c6f58cfb 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -319,11 +319,13 @@ static void handle_ctr_rx(uint32_t ep_id) { } else { buf_id = BTABLE_BUF_RX; } - uint16_t const rx_count = btable_get_count(ep_id, buf_id); + const uint16_t rx_count = btable_get_count(ep_id, buf_id); uint16_t pma_addr = (uint16_t) btable_get_addr(ep_id, buf_id); if (xfer->ff) { - fsdev_read_packet_memory_ff(xfer->ff, pma_addr, rx_count); + // fsdev_read_packet_memory_ff(xfer->ff, pma_addr, rx_count); + fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(pma_addr); + tu_fifo_write_from_hwfifo(xfer->ff, (void *)pma_buf, rx_count); } else { fsdev_read_packet_memory(xfer->buffer + xfer->queued_len, pma_addr, rx_count); } @@ -720,7 +722,9 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { uint16_t addr_ptr = (uint16_t) btable_get_addr(ep_ix, buf_id); if (xfer->ff) { - fsdev_write_packet_memory_ff(xfer->ff, addr_ptr, len); + // fsdev_write_packet_memory_ff(xfer->ff, addr_ptr, len); + fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(addr_ptr); + tu_fifo_read_to_hwfifo(xfer->ff, (void *)(uintptr_t)pma_buf, len); } else { fsdev_write_packet_memory(addr_ptr, &(xfer->buffer[xfer->queued_len]), len); } @@ -740,7 +744,7 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, tusb_dir_t dir) { (void) rhport; xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); - uint8_t const ep_idx = xfer->ep_idx; + const uint8_t ep_idx = xfer->ep_idx; if (dir == TUSB_DIR_IN) { dcd_transmit_packet(xfer, ep_idx); diff --git a/src/portable/st/stm32_fsdev/fsdev_at32.h b/src/portable/st/stm32_fsdev/fsdev_at32.h index 6877dc131..e75430396 100644 --- a/src/portable/st/stm32_fsdev/fsdev_at32.h +++ b/src/portable/st/stm32_fsdev/fsdev_at32.h @@ -35,7 +35,6 @@ #endif -#define FSDEV_PMA_SIZE (512u) #define FSDEV_USE_SBUF_ISO 0 #define FSDEV_REG_BASE (APB1PERIPH_BASE + 0x00005C00UL) #define FSDEV_PMA_BASE (APB1PERIPH_BASE + 0x00006000UL) diff --git a/src/portable/st/stm32_fsdev/fsdev_ch32.h b/src/portable/st/stm32_fsdev/fsdev_ch32.h index ee0057cb4..37ea7808e 100644 --- a/src/portable/st/stm32_fsdev/fsdev_ch32.h +++ b/src/portable/st/stm32_fsdev/fsdev_ch32.h @@ -53,7 +53,6 @@ #pragma GCC diagnostic pop #endif -#define FSDEV_PMA_SIZE (512u) #define FSDEV_USE_SBUF_ISO 0 #define FSDEV_REG_BASE (APB1PERIPH_BASE + 0x00005C00UL) #define FSDEV_PMA_BASE (APB1PERIPH_BASE + 0x00006000UL) diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index 4b7d3d301..85ca88f1c 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -32,10 +32,23 @@ #ifndef TUSB_FSDEV_STM32_H #define TUSB_FSDEV_STM32_H -#if CFG_TUSB_MCU == OPT_MCU_STM32F0 +#if CFG_TUSB_MCU == OPT_MCU_STM32C0 + #include "stm32c0xx.h" + #define FSDEV_HAS_SBUF_ISO 1 + #define USB USB_DRD_FS + #define USB_EP_CTR_RX USB_CHEP_VTRX + #define USB_EP_CTR_TX USB_CHEP_VTTX + #define USB_EPREG_MASK USB_CHEP_REG_MASK + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F0 #include "stm32f0xx.h" - #define FSDEV_PMA_SIZE (1024u) - #define FSDEV_REG_BASE USB_BASE + #define FSDEV_REG_BASE USB_BASE #define FSDEV_HAS_SBUF_ISO 0 // F0x2 models are crystal-less // All have internal D+ pull-up @@ -44,29 +57,24 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32F1 #include "stm32f1xx.h" - #define FSDEV_PMA_SIZE (512u) #define FSDEV_HAS_SBUF_ISO 0 // NO internal Pull-ups // *B, and *C: 2 x 16 bits/word // F1 names this differently from the rest - #define USB_CNTR_LPMODE USB_CNTR_LP_MODE + #define USB_CNTR_LPMODE USB_CNTR_LP_MODE -#elif defined(STM32F302xB) || defined(STM32F302xC) || \ - defined(STM32F303xB) || defined(STM32F303xC) || \ - defined(STM32F373xC) +#elif defined(STM32F302xB) || defined(STM32F302xC) || defined(STM32F303xB) || defined(STM32F303xC) || \ + defined(STM32F373xC) #include "stm32f3xx.h" - #define FSDEV_PMA_SIZE (512u) #define FSDEV_HAS_SBUF_ISO 0 // NO internal Pull-ups // *B, and *C: 1 x 16 bits/word // PMA dedicated to USB (no sharing with CAN) -#elif defined(STM32F302x6) || defined(STM32F302x8) || \ - defined(STM32F302xD) || defined(STM32F302xE) || \ - defined(STM32F303xD) || defined(STM32F303xE) +#elif defined(STM32F302x6) || defined(STM32F302x8) || defined(STM32F302xD) || defined(STM32F302xE) || \ + defined(STM32F303xD) || defined(STM32F303xE) #include "stm32f3xx.h" - #define FSDEV_PMA_SIZE (1024u) #define FSDEV_HAS_SBUF_ISO 0 // NO internal Pull-ups // *6, *8, *D, and *E: 2 x 16 bits/word LPM Support @@ -74,28 +82,32 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32L0 #include "stm32l0xx.h" - #define FSDEV_PMA_SIZE (1024u) #define FSDEV_HAS_SBUF_ISO 0 #elif CFG_TUSB_MCU == OPT_MCU_STM32L1 #include "stm32l1xx.h" - #define FSDEV_PMA_SIZE (512u) #define FSDEV_HAS_SBUF_ISO 0 -#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 - #include "stm32g4xx.h" - #define FSDEV_PMA_SIZE (1024u) +#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 + #include "stm32l4xx.h" #define FSDEV_HAS_SBUF_ISO 0 +#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 + #include "stm32l5xx.h" + #define FSDEV_HAS_SBUF_ISO 0 + + #ifndef USB_PMAADDR + #define USB_PMAADDR (USB_BASE + (USB_PMAADDR_NS - USB_BASE_NS)) + #endif + #elif CFG_TUSB_MCU == OPT_MCU_STM32G0 #include "stm32g0xx.h" - #define FSDEV_PMA_SIZE (2048u) - #define FSDEV_HAS_SBUF_ISO 1 - #define USB USB_DRD_FS + #define FSDEV_HAS_SBUF_ISO 1 + #define USB USB_DRD_FS - #define USB_EP_CTR_RX USB_EP_VTRX - #define USB_EP_CTR_TX USB_EP_VTTX - #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE #define USB_EPREG_MASK USB_CHEP_REG_MASK #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK @@ -110,78 +122,20 @@ #define USB_ISTR_EP_ID USB_ISTR_IDN #define USB_EPADDR_FIELD USB_CHEP_ADDR #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY - #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN -#elif CFG_TUSB_MCU == OPT_MCU_STM32C0 - #include "stm32c0xx.h" - #define FSDEV_PMA_SIZE (2048u) - #define FSDEV_HAS_SBUF_ISO 1 - #define USB USB_DRD_FS - #define USB_EP_CTR_RX USB_CHEP_VTRX - #define USB_EP_CTR_TX USB_CHEP_VTTX - #define USB_EPREG_MASK USB_CHEP_REG_MASK - #define USB_CNTR_FRES USB_CNTR_USBRST - #define USB_CNTR_RESUME USB_CNTR_L2RES - #define USB_ISTR_EP_ID USB_ISTR_IDN - #define USB_EPADDR_FIELD USB_CHEP_ADDR - #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY - #define USB_CNTR_FSUSP USB_CNTR_SUSPEN +#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 + #include "stm32g4xx.h" + #define FSDEV_HAS_SBUF_ISO 0 #elif CFG_TUSB_MCU == OPT_MCU_STM32H5 #include "stm32h5xx.h" - #define FSDEV_PMA_SIZE (2048u) - #define FSDEV_HAS_SBUF_ISO 1 - #define USB USB_DRD_FS - - #define USB_EP_CTR_RX USB_EP_VTRX - #define USB_EP_CTR_TX USB_EP_VTTX - #define USB_EP_T_FIELD USB_CHEP_UTYPE - #define USB_EPREG_MASK USB_CHEP_REG_MASK - #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK - #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK - #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 - #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 - #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 - #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 - #define USB_EPRX_STAT USB_CH_RX_VALID - #define USB_EPKIND_MASK USB_EP_KIND_MASK - #define USB_CNTR_FRES USB_CNTR_USBRST - #define USB_CNTR_RESUME USB_CNTR_L2RES - #define USB_ISTR_EP_ID USB_ISTR_IDN - #define USB_EPADDR_FIELD USB_CHEP_ADDR - #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY - #define USB_CNTR_FSUSP USB_CNTR_SUSPEN - -#elif CFG_TUSB_MCU == OPT_MCU_STM32WB - #include "stm32wbxx.h" - #define FSDEV_PMA_SIZE (1024u) - #define FSDEV_HAS_SBUF_ISO 0 - /* ST provided header has incorrect value of USB_PMAADDR */ - #define FSDEV_PMA_BASE USB1_PMAADDR - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 - #include "stm32l4xx.h" - #define FSDEV_PMA_SIZE (1024u) - #define FSDEV_HAS_SBUF_ISO 0 - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 - #include "stm32l5xx.h" - #define FSDEV_PMA_SIZE (1024u) - #define FSDEV_HAS_SBUF_ISO 0 - - #ifndef USB_PMAADDR - #define USB_PMAADDR (USB_BASE + (USB_PMAADDR_NS - USB_BASE_NS)) - #endif - -#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 - #include "stm32u5xx.h" - #define FSDEV_PMA_SIZE (2048u) #define FSDEV_HAS_SBUF_ISO 1 - #define USB USB_DRD_FS + #define USB USB_DRD_FS - #define USB_EP_CTR_RX USB_EP_VTRX - #define USB_EP_CTR_TX USB_EP_VTTX - #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE #define USB_EPREG_MASK USB_CHEP_REG_MASK #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK @@ -200,7 +154,6 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32U0 #include "stm32u0xx.h" - #define FSDEV_PMA_SIZE (1024u) #define FSDEV_BUS_32BIT #define FSDEV_HAS_SBUF_ISO 1 #define USB USB_DRD_FS @@ -226,10 +179,9 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32U3 #include "stm32u3xx.h" - #define FSDEV_PMA_SIZE (2048u) #define FSDEV_BUS_32BIT #define FSDEV_HAS_SBUF_ISO 1 // This is assumed to work but has not been tested... - #define USB USB_DRD_FS + #define USB USB_DRD_FS #define USB_EP_CTR_RX USB_EP_VTRX #define USB_EP_CTR_TX USB_EP_VTTX @@ -240,15 +192,45 @@ #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 - #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 - #define USB_EPRX_STAT USB_CH_RX_VALID - #define USB_EPKIND_MASK USB_EP_KIND_MASK - #define USB_CNTR_FRES USB_CNTR_USBRST - #define USB_CNTR_RESUME USB_CNTR_L2RES - #define USB_ISTR_EP_ID USB_ISTR_IDN - #define USB_EPADDR_FIELD USB_CHEP_ADDR - #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY - #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 + #define USB_EPRX_STAT USB_CH_RX_VALID + #define USB_EPKIND_MASK USB_EP_KIND_MASK + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + +#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + #include "stm32u5xx.h" + #define FSDEV_HAS_SBUF_ISO 1 + #define USB USB_DRD_FS + + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EPREG_MASK USB_CHEP_REG_MASK + #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK + #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK + #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 + #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 + #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 + #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 + #define USB_EPRX_STAT USB_CH_RX_VALID + #define USB_EPKIND_MASK USB_EP_KIND_MASK + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + +#elif CFG_TUSB_MCU == OPT_MCU_STM32WB + #include "stm32wbxx.h" + #define FSDEV_HAS_SBUF_ISO 0 + /* ST provided header has incorrect value of USB_PMAADDR */ + #define FSDEV_PMA_BASE USB1_PMAADDR #else #error You are using an untested or unimplemented STM32 variant. Please update the driver. diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 8c97eaa2f..02523d0d2 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -367,7 +367,7 @@ static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum) { // Push packet to Tx-FIFO if (xfer->ff) { volatile uint32_t* tx_fifo = dwc2->fifo[epnum]; - tu_fifo_read_n_access_mode(xfer->ff, (void *)(uintptr_t)tx_fifo, xact_bytes, true); + tu_fifo_read_to_hwfifo(xfer->ff, (void *)(uintptr_t)tx_fifo, xact_bytes); total_bytes_written += xact_bytes; } else { dfifo_write_packet(dwc2, epnum, xfer->buffer, xact_bytes); @@ -889,7 +889,7 @@ static void handle_rxflvl_irq(uint8_t rhport) { if (byte_count != 0) { // Read packet off RxFIFO if (xfer->ff != NULL) { - tu_fifo_write_n_access_mode(xfer->ff, (const void *)(uintptr_t)rx_fifo, byte_count, true); + tu_fifo_write_from_hwfifo(xfer->ff, (const void *)(uintptr_t)rx_fifo, byte_count); } else { dfifo_read_packet(dwc2, xfer->buffer, byte_count); xfer->buffer += byte_count; diff --git a/src/tusb_option.h b/src/tusb_option.h index a0f4e7057..6129a9532 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -307,13 +307,14 @@ #if defined(TUP_USBIP_DWC2) #if CFG_TUD_DWC2_SLAVE_ENABLE && !CFG_TUD_DWC2_DMA_ENABLE #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 4 // 32bit access - #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 0 // fixed hwfifo address #endif #if CFG_TUH_DWC2_SLAVE_ENABLE && !CFG_TUH_DWC2_DMA_ENABLE #define CFG_TUH_EDPT_DEDICATED_HWFIFO 1 #endif + + #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 4 // 32bit access + #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 0 // fixed hwfifo address #endif //------------- ChipIdea -------------// @@ -354,6 +355,17 @@ //------------ FSDEV --------------// #if defined(TUP_USBIP_FSDEV) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 + + #if FSDEV_PMA_SIZE == 512 + #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 2 // 16-bit data + #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 4 // 32-bit address increase + #elif FSDEV_PMA_SIZE == 1024 + #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 2 // 16-bit data + #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 2 // 16-bit address increase + #elif FSDEV_PMA_SIZE == 2048 + #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 4 // 32-bit data + #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 4 // 32-bit address increase + #endif #endif //------------ MUSB --------------// diff --git a/test/unit-test/project.yml b/test/unit-test/project.yml index ea20c5f72..bf7cb5115 100644 --- a/test/unit-test/project.yml +++ b/test/unit-test/project.yml @@ -128,6 +128,7 @@ :defines: :test: - _UNITY_TEST_ + - CFG_TUD_EDPT_DEDICATED_HWFIFO=1 - CFG_TUSB_FIFO_ACCESS_DATA_STRIDE=4 - CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE=0 :release: [] -- cgit v1.3.1 From 9b5c7761cc6ea816cf35f330cb269030256be7ca Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Dec 2025 17:45:20 +0700 Subject: add separate tu_hwifo_*() with data from buffer/software fifo. Remove duplicated packet write/read for fsdev --- src/common/tusb_fifo.c | 43 ++++++----- src/common/tusb_fifo.h | 26 +++++-- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 16 ++-- src/portable/st/stm32_fsdev/fsdev_common.c | 106 -------------------------- src/portable/st/stm32_fsdev/fsdev_common.h | 6 -- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 +- 6 files changed, 53 insertions(+), 148 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index bc4ee180c..a46bee955 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -128,14 +128,15 @@ enum { STRIDE_REMAIN_MASK = sizeof(stride_item_t) - 1u }; -// Copy to fifo from fixed address buffer (usually a rx register) with TU_FIFO_FIXED_ADDR_RW32 mode -static void ff_push_stride(uint8_t *ff_buf, const volatile stride_item_t *src, uint16_t len) { - // Reading full available 16/32-bit src and write to fifo +void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len) { + const volatile stride_item_t *src = (const volatile stride_item_t *)hwfifo; + + // Reading full available 16/32-bit hwfifo and write to fifo uint16_t n_items = len >> (CFG_TUSB_FIFO_ACCESS_DATA_STRIDE >> 1); // len / data_stride; while (n_items--) { const stride_item_t tmp = *src; - stride_unaligned_write(ff_buf, tmp); - ff_buf += sizeof(stride_item_t); + stride_unaligned_write(dest, tmp); + dest += sizeof(stride_item_t); #if CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE src = (const volatile stride_item_t *)((uintptr_t)src + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); @@ -146,17 +147,19 @@ static void ff_push_stride(uint8_t *ff_buf, const volatile stride_item_t *src, u const uint8_t bytes_rem = len & STRIDE_REMAIN_MASK; if (bytes_rem) { const stride_item_t tmp = *src; - memcpy(ff_buf, &tmp, bytes_rem); + memcpy(dest, &tmp, bytes_rem); } } // Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode -static void ff_pull_stride(volatile stride_item_t *dest, const uint8_t *ff_buf, uint16_t len) { +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len) { + volatile stride_item_t *dest = (volatile stride_item_t *)hwfifo; + // Write full available 16/32 bit words to dest uint16_t n_items = len >> (CFG_TUSB_FIFO_ACCESS_DATA_STRIDE >> 1); // len / data_stride; while (n_items--) { - *dest = stride_unaligned_read(ff_buf); - ff_buf += sizeof(stride_item_t); + *dest = stride_unaligned_read(src); + src += sizeof(stride_item_t); #if CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE dest = (volatile stride_item_t *)((uintptr_t)dest + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); @@ -167,7 +170,7 @@ static void ff_pull_stride(volatile stride_item_t *dest, const uint8_t *ff_buf, const uint8_t bytes_rem = len & STRIDE_REMAIN_MASK; if (bytes_rem) { stride_item_t tmp = 0u; - memcpy(&tmp, ff_buf, bytes_rem); + memcpy(&tmp, src, bytes_rem); *dest = tmp; } } @@ -182,23 +185,23 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 #if CFG_TUD_EDPT_DEDICATED_HWFIFO if (stride_mode) { - const volatile stride_item_t *stride_src = (const volatile stride_item_t *)app_buf; + const volatile stride_item_t *hwfifo = (const volatile stride_item_t *)app_buf; if (n <= lin_bytes) { // Linear only case - ff_push_stride(ff_buf, stride_src, n); + tu_hwfifo_read(hwfifo, ff_buf, n); } else { // Wrap around case // Write full words to linear part of buffer uint16_t lin_nitems_bytes = lin_bytes & ~STRIDE_REMAIN_MASK; - ff_push_stride(ff_buf, stride_src, lin_nitems_bytes); + tu_hwfifo_read(hwfifo, ff_buf, lin_nitems_bytes); ff_buf += lin_nitems_bytes; // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary const uint8_t rem = lin_bytes & STRIDE_REMAIN_MASK; if (rem > 0) { const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(stride_item_t) - rem); - const stride_item_t tmp = *stride_src; + const stride_item_t tmp = *hwfifo; tu_scatter_write32(tmp, ff_buf, rem, f->buffer, remrem); wrap_bytes -= remrem; @@ -209,7 +212,7 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 // Write data wrapped part if (wrap_bytes > 0) { - ff_push_stride(ff_buf, stride_src, wrap_bytes); + tu_hwfifo_read(hwfifo, ff_buf, wrap_bytes); } } } else @@ -236,17 +239,17 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd #if CFG_TUD_EDPT_DEDICATED_HWFIFO if (stride_mode) { - volatile stride_item_t *stride_dst = (volatile stride_item_t *)app_buf; + volatile stride_item_t *hwfifo = (volatile stride_item_t *)app_buf; if (n <= lin_bytes) { // Linear only case - ff_pull_stride(stride_dst, ff_buf, n); + tu_hwfifo_write(hwfifo, ff_buf, n); } else { // Wrap around case // Read full words from linear part uint16_t lin_nitems_bytes = lin_bytes & ~STRIDE_REMAIN_MASK; - ff_pull_stride(stride_dst, ff_buf, lin_nitems_bytes); + tu_hwfifo_write(hwfifo, ff_buf, lin_nitems_bytes); ff_buf += lin_nitems_bytes; // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary @@ -255,7 +258,7 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(stride_item_t) - rem); const stride_item_t scatter = (stride_item_t)tu_scatter_read32(ff_buf, rem, f->buffer, remrem); - *stride_dst = scatter; + *hwfifo = scatter; wrap_bytes -= remrem; ff_buf = f->buffer + remrem; // wrap around @@ -265,7 +268,7 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd // Read data wrapped part if (wrap_bytes > 0) { - ff_pull_stride(stride_dst, ff_buf, wrap_bytes); + tu_hwfifo_write(hwfifo, ff_buf, wrap_bytes); } } } else diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 53c5f6e56..f28f54749 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -204,9 +204,6 @@ bool tu_fifo_read(tu_fifo_t *f, void *buffer); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n) { return tu_fifo_read_n_access_mode(f, buffer, n, false); } -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_to_hwfifo(tu_fifo_t *f, void *buffer, uint16_t n) { - return tu_fifo_read_n_access_mode(f, buffer, n, true); -} // discard first n items from fifo i.e advance read pointer by n with mutex // return number of discarded items @@ -220,10 +217,29 @@ bool tu_fifo_write(tu_fifo_t *f, const void *data); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n) { return tu_fifo_write_n_access_mode(f, data, n, false); } -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_from_hwfifo(tu_fifo_t *f, const void *data, uint16_t n) { - return tu_fifo_write_n_access_mode(f, data, n, true); + +//--------------------------------------------------------------------+ +// Hardware FIFO API +// Special hardware FIFO/Buffer to hold USB data, usually requires certain access method these can be configured with +// CFG_TUSB_FIFO_ACCESS_DATA_STRIDE (data width) and CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE (address increment) +// Note: these usually has opposiite direction (read/write) to/from our software FIFO (tu_fifo_t) +//--------------------------------------------------------------------+ +#if CFG_TUD_EDPT_DEDICATED_HWFIFO +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(tu_fifo_t *f, void *hwfifo, uint16_t n) { + return tu_fifo_read_n_access_mode(f, hwfifo, n, true); } +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_read_to_fifo(tu_fifo_t *f, const void *hwfifo, uint16_t n) { + return tu_fifo_write_n_access_mode(f, hwfifo, n, true); +} + +// read from hwfifo to buffer +void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len); + +// write to hwfifo from buffer +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len); +#endif + //--------------------------------------------------------------------+ // Internal Helper Local // work on local copies of read/write indices in order to only access them once for re-entrancy diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 0c6f58cfb..cc2626383 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -321,13 +321,12 @@ static void handle_ctr_rx(uint32_t ep_id) { } const uint16_t rx_count = btable_get_count(ep_id, buf_id); uint16_t pma_addr = (uint16_t) btable_get_addr(ep_id, buf_id); + fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(pma_addr); if (xfer->ff) { - // fsdev_read_packet_memory_ff(xfer->ff, pma_addr, rx_count); - fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(pma_addr); - tu_fifo_write_from_hwfifo(xfer->ff, (void *)pma_buf, rx_count); + tu_hwfifo_read_to_fifo(xfer->ff, (void *)pma_buf, rx_count); } else { - fsdev_read_packet_memory(xfer->buffer + xfer->queued_len, pma_addr, rx_count); + tu_hwfifo_read(pma_buf, xfer->buffer + xfer->queued_len, rx_count); } xfer->queued_len += rx_count; @@ -719,14 +718,13 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { } else { buf_id = BTABLE_BUF_TX; } - uint16_t addr_ptr = (uint16_t) btable_get_addr(ep_ix, buf_id); + uint16_t addr_ptr = (uint16_t)btable_get_addr(ep_ix, buf_id); + fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(addr_ptr); if (xfer->ff) { - // fsdev_write_packet_memory_ff(xfer->ff, addr_ptr, len); - fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(addr_ptr); - tu_fifo_read_to_hwfifo(xfer->ff, (void *)(uintptr_t)pma_buf, len); + tu_hwfifo_write_from_fifo(xfer->ff, (void *)(uintptr_t)pma_buf, len); } else { - fsdev_write_packet_memory(addr_ptr, &(xfer->buffer[xfer->queued_len]), len); + tu_hwfifo_write(pma_buf, &(xfer->buffer[xfer->queued_len]), len); } xfer->queued_len += len; diff --git a/src/portable/st/stm32_fsdev/fsdev_common.c b/src/portable/st/stm32_fsdev/fsdev_common.c index 5d60ad9a2..19f36b492 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.c +++ b/src/portable/st/stm32_fsdev/fsdev_common.c @@ -136,112 +136,6 @@ bool fsdev_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbyte return true; } -// Write to PMA from FIFO -bool fsdev_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes) { - if (wNBytes == 0) { - return true; - } - - // Since we copy from a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies - tu_fifo_buffer_info_t info; - tu_fifo_get_read_info(ff, &info); - - uint16_t cnt_lin = tu_min16(wNBytes, info.linear.len); - uint16_t cnt_wrap = tu_min16(wNBytes - cnt_lin, info.wrapped.len); - uint16_t const cnt_total = cnt_lin + cnt_wrap; - - // We want to read from the FIFO and write it into the PMA, if LIN part is ODD and has WRAPPED part, - // last lin byte will be combined with wrapped part To ensure PMA is always access aligned - uint16_t lin_even = cnt_lin & ~(FSDEV_BUS_SIZE - 1); - uint16_t lin_odd = cnt_lin & (FSDEV_BUS_SIZE - 1); - uint8_t const *src8 = (uint8_t const*) info.linear.ptr; - - // write even linear part - fsdev_write_packet_memory(dst, src8, lin_even); - dst += lin_even; - src8 += lin_even; - - if (lin_odd == 0) { - src8 = (uint8_t const*) info.wrapped.ptr; - } else { - // Combine last linear bytes + first wrapped bytes to form fsdev bus width data - fsdev_bus_t temp = 0; - uint16_t i; - for(i = 0; i < lin_odd; i++) { - temp |= *src8++ << (i * 8); - } - - src8 = (uint8_t const*) info.wrapped.ptr; - for(; i < FSDEV_BUS_SIZE && cnt_wrap > 0; i++, cnt_wrap--) { - temp |= *src8++ << (i * 8); - } - - fsdev_write_packet_memory(dst, &temp, FSDEV_BUS_SIZE); - dst += FSDEV_BUS_SIZE; - } - - // write the rest of the wrapped part - fsdev_write_packet_memory(dst, src8, cnt_wrap); - - tu_fifo_advance_read_pointer(ff, cnt_total); - return true; -} - -// Read from PMA to FIFO -bool fsdev_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes) { - if (wNBytes == 0) { - return true; - } - - // Since we copy into a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies - // Check for first linear part - tu_fifo_buffer_info_t info; - tu_fifo_get_write_info(ff, &info); // We want to read from the FIFO - - uint16_t cnt_lin = tu_min16(wNBytes, info.linear.len); - uint16_t cnt_wrap = tu_min16(wNBytes - cnt_lin, info.wrapped.len); - uint16_t cnt_total = cnt_lin + cnt_wrap; - - // We want to read from the FIFO and write it into the PMA, if LIN part is ODD and has WRAPPED part, - // last lin byte will be combined with wrapped part To ensure PMA is always access aligned - - uint16_t lin_even = cnt_lin & ~(FSDEV_BUS_SIZE - 1); - uint16_t lin_odd = cnt_lin & (FSDEV_BUS_SIZE - 1); - uint8_t *dst8 = (uint8_t *) info.linear.ptr; - - // read even linear part - fsdev_read_packet_memory(dst8, src, lin_even); - dst8 += lin_even; - src += lin_even; - - if (lin_odd == 0) { - dst8 = (uint8_t *) info.wrapped.ptr; - } else { - // Combine last linear bytes + first wrapped bytes to form fsdev bus width data - fsdev_bus_t temp; - fsdev_read_packet_memory(&temp, src, FSDEV_BUS_SIZE); - src += FSDEV_BUS_SIZE; - - uint16_t i; - for (i = 0; i < lin_odd; i++) { - *dst8++ = (uint8_t) (temp & 0xfful); - temp >>= 8; - } - - dst8 = (uint8_t *) info.wrapped.ptr; - for (; i < FSDEV_BUS_SIZE && cnt_wrap > 0; i++, cnt_wrap--) { - *dst8++ = (uint8_t) (temp & 0xfful); - temp >>= 8; - } - } - - // read the rest of the wrapped part - fsdev_read_packet_memory(dst8, src, cnt_wrap); - - tu_fifo_advance_write_pointer(ff, cnt_total); - return true; -} - //--------------------------------------------------------------------+ // BTable Helper //--------------------------------------------------------------------+ diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 0c67ee0c7..4715f438f 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -337,12 +337,6 @@ bool fsdev_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_ // - Uses unaligned for RAM (since M0 cannot access unaligned address) bool fsdev_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes); -// Write to PMA from FIFO -bool fsdev_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes); - -// Read from PMA to FIFO -bool fsdev_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes); - #ifdef __cplusplus } #endif diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 02523d0d2..ea952dbcc 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -367,7 +367,7 @@ static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum) { // Push packet to Tx-FIFO if (xfer->ff) { volatile uint32_t* tx_fifo = dwc2->fifo[epnum]; - tu_fifo_read_to_hwfifo(xfer->ff, (void *)(uintptr_t)tx_fifo, xact_bytes); + tu_hwfifo_write_from_fifo(xfer->ff, (void *)(uintptr_t)tx_fifo, xact_bytes); total_bytes_written += xact_bytes; } else { dfifo_write_packet(dwc2, epnum, xfer->buffer, xact_bytes); @@ -889,7 +889,7 @@ static void handle_rxflvl_irq(uint8_t rhport) { if (byte_count != 0) { // Read packet off RxFIFO if (xfer->ff != NULL) { - tu_fifo_write_from_hwfifo(xfer->ff, (const void *)(uintptr_t)rx_fifo, byte_count); + tu_hwfifo_read_to_fifo(xfer->ff, (const void *)(uintptr_t)rx_fifo, byte_count); } else { dfifo_read_packet(dwc2, xfer->buffer, byte_count); xfer->buffer += byte_count; -- cgit v1.3.1 From 111247337c3911691acd7d218362460a6c0a2572 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Dec 2025 18:01:50 +0700 Subject: replace PMA buffer packet read/write by using tu_hwfifo API --- src/common/tusb_fifo.c | 6 +-- src/common/tusb_fifo.h | 4 +- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 2 +- src/portable/st/stm32_fsdev/fsdev_common.c | 67 --------------------------- src/portable/st/stm32_fsdev/fsdev_common.h | 14 ------ src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 16 +++---- 6 files changed, 15 insertions(+), 94 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index a46bee955..8be137628 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -113,7 +113,7 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { // Pull & Push // copy data to/from fifo without updating read/write pointers //--------------------------------------------------------------------+ -#if CFG_TUD_EDPT_DEDICATED_HWFIFO +#if CFG_TUSB_FIFO_HWFIFO_API #if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE == 4 #define stride_unaligned_write tu_unaligned_write32 #define stride_unaligned_read tu_unaligned_read32 @@ -183,7 +183,7 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 uint16_t wrap_bytes = n - lin_bytes; uint8_t *ff_buf = f->buffer + wr_ptr; -#if CFG_TUD_EDPT_DEDICATED_HWFIFO +#if CFG_TUSB_FIFO_HWFIFO_API if (stride_mode) { const volatile stride_item_t *hwfifo = (const volatile stride_item_t *)app_buf; if (n <= lin_bytes) { @@ -237,7 +237,7 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd uint16_t wrap_bytes = n - lin_bytes; // only used if wrapped const uint8_t *ff_buf = f->buffer + rd_ptr; -#if CFG_TUD_EDPT_DEDICATED_HWFIFO +#if CFG_TUSB_FIFO_HWFIFO_API if (stride_mode) { volatile stride_item_t *hwfifo = (volatile stride_item_t *)app_buf; diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index f28f54749..b17f6a1d6 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -41,6 +41,8 @@ extern "C" { // mutex is only needed for RTOS. For OS None, we don't get preempted #define CFG_FIFO_MUTEX OSAL_MUTEX_REQUIRED +#define CFG_TUSB_FIFO_HWFIFO_API (CFG_TUD_EDPT_DEDICATED_HWFIFO) + #ifndef CFG_TUSB_FIFO_ACCESS_DATA_STRIDE #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 0 #endif @@ -224,7 +226,6 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const // CFG_TUSB_FIFO_ACCESS_DATA_STRIDE (data width) and CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE (address increment) // Note: these usually has opposiite direction (read/write) to/from our software FIFO (tu_fifo_t) //--------------------------------------------------------------------+ -#if CFG_TUD_EDPT_DEDICATED_HWFIFO TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(tu_fifo_t *f, void *hwfifo, uint16_t n) { return tu_fifo_read_n_access_mode(f, hwfifo, n, true); } @@ -233,6 +234,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_read_to_fifo(tu_fifo_t *f return tu_fifo_write_n_access_mode(f, hwfifo, n, true); } +#if CFG_TUSB_FIFO_HWFIFO_API // read from hwfifo to buffer void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len); diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index cc2626383..dae921049 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -285,7 +285,7 @@ static void handle_ctr_setup(uint32_t ep_id) { uint16_t rx_addr = btable_get_addr(ep_id, BTABLE_BUF_RX); uint8_t setup_packet[8] TU_ATTR_ALIGNED(4); - fsdev_read_packet_memory(setup_packet, rx_addr, rx_count); + tu_hwfifo_read(PMA_BUF_AT(rx_addr), setup_packet, rx_count); // Clear CTR RX if another setup packet arrived before this, it will be discarded ep_write_clear_ctr(ep_id, TUSB_DIR_OUT); diff --git a/src/portable/st/stm32_fsdev/fsdev_common.c b/src/portable/st/stm32_fsdev/fsdev_common.c index 19f36b492..4f127ae86 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.c +++ b/src/portable/st/stm32_fsdev/fsdev_common.c @@ -69,73 +69,6 @@ void fsdev_deinit(void) { } } - -//--------------------------------------------------------------------+ -// PMA read/write -//--------------------------------------------------------------------+ - -// Write to packet memory area (PMA) from user memory -// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT -// - Uses unaligned for RAM (since M0 cannot access unaligned address) -bool fsdev_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes) { - if (nbytes == 0) { - return true; - } - uint32_t n_write = nbytes / FSDEV_BUS_SIZE; - - fsdev_pma_buf_t* pma_buf = PMA_BUF_AT(dst); - const uint8_t *src8 = src; - - while (n_write--) { - pma_buf->value = fsdevbus_unaligned_read(src8); - src8 += FSDEV_BUS_SIZE; - pma_buf++; - } - - // odd bytes e.g 1 for 16-bit or 1-3 for 32-bit - uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); - if (odd) { - fsdev_bus_t temp = 0; - for(uint16_t i = 0; i < odd; i++) { - temp |= *src8++ << (i * 8); - } - pma_buf->value = temp; - } - - return true; -} - -// Read from packet memory area (PMA) to user memory. -// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT -// - Uses unaligned for RAM (since M0 cannot access unaligned address) -bool fsdev_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes) { - if (nbytes == 0) { - return true; - } - uint32_t n_read = nbytes / FSDEV_BUS_SIZE; - - fsdev_pma_buf_t* pma_buf = PMA_BUF_AT(src); - uint8_t *dst8 = (uint8_t *)dst; - - while (n_read--) { - fsdevbus_unaligned_write(dst8, (fsdev_bus_t ) pma_buf->value); - dst8 += FSDEV_BUS_SIZE; - pma_buf++; - } - - // odd bytes e.g 1 for 16-bit or 1-3 for 32-bit - uint16_t odd = nbytes & (FSDEV_BUS_SIZE - 1); - if (odd) { - fsdev_bus_t temp = pma_buf->value; - while (odd--) { - *dst8++ = (uint8_t) (temp & 0xfful); - temp >>= 8; - } - } - - return true; -} - //--------------------------------------------------------------------+ // BTable Helper //--------------------------------------------------------------------+ diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 4715f438f..69440aa32 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -323,20 +323,6 @@ uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_bloc // Set RX buffer size void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint16_t wCount); -//--------------------------------------------------------------------+ -// PMA (Packet Memory Area) Access -//--------------------------------------------------------------------+ - -// Write to packet memory area (PMA) from user memory -// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT -// - Uses unaligned for RAM (since M0 cannot access unaligned address) -bool fsdev_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes); - -// Read from packet memory area (PMA) to user memory. -// - Packet memory must be either strictly 16-bit or 32-bit depending on FSDEV_BUS_32BIT -// - Uses unaligned for RAM (since M0 cannot access unaligned address) -bool fsdev_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes); - #ifdef __cplusplus } #endif diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index da9c6961c..480e460cb 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -303,10 +303,12 @@ static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { uint8_t const daddr = (ch_reg & USB_CHEP_DEVADDR_Msk) >> USB_CHEP_DEVADDR_Pos; uint8_t ep_id = endpoint_find(daddr, ep_num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0)); - if (ep_id == TUSB_INDEX_INVALID_8) return; + if (ep_id == TUSB_INDEX_INVALID_8) { + return; + } - hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; - hcd_channel_t* channel = &_hcd_data.channel[ch_id]; + hcd_endpoint_t *edpt = &_hcd_data.edpt[ep_id]; + hcd_channel_t *channel = &_hcd_data.channel[ch_id]; if (dir == TUSB_DIR_OUT) { // OUT/TX direction @@ -314,7 +316,7 @@ static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { // More data to send uint16_t const len = tu_min16(edpt->buflen - edpt->queued_len, edpt->max_packet_size); uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_TX); - fsdev_write_packet_memory(pma_addr, &(edpt->buffer[edpt->queued_len]), len); + tu_hwfifo_write(PMA_BUF_AT(pma_addr), &(edpt->buffer[edpt->queued_len]), len); btable_set_count(ch_id, BTABLE_BUF_TX, len); edpt->queued_len += len; channel_write_status(ch_id, ch_reg, TUSB_DIR_OUT, EP_STAT_VALID, false); @@ -329,8 +331,7 @@ static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { // IN/RX direction uint16_t const rx_count = channel_get_rx_count(ch_id); uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_RX); - - fsdev_read_packet_memory(edpt->buffer + edpt->queued_len, pma_addr, rx_count); + tu_hwfifo_read(PMA_BUF_AT(pma_addr), edpt->buffer + edpt->queued_len, rx_count); edpt->queued_len += rx_count; if ((rx_count < edpt->max_packet_size) || (edpt->queued_len >= edpt->buflen)) { @@ -841,8 +842,7 @@ static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir) { if (dir == TUSB_DIR_OUT) { uint16_t const len = tu_min16(edpt->buflen - edpt->queued_len, edpt->max_packet_size); - - fsdev_write_packet_memory(pma_addr, &(edpt->buffer[edpt->queued_len]), len); + tu_hwfifo_write(PMA_BUF_AT(pma_addr), &(edpt->buffer[edpt->queued_len]), len); btable_set_count(ch_id, BTABLE_BUF_TX, len); edpt->queued_len += len; -- cgit v1.3.1 From 009750c747ff1d5a25d976de9161b974eb5f18e7 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 1 Jan 2026 11:35:09 +0700 Subject: minor refactor --- src/common/tusb_fifo.c | 62 ++++++++++++++++------------------ src/common/tusb_fifo.h | 12 +++---- src/portable/renesas/rusb2/dcd_rusb2.c | 9 +++-- src/tusb_option.h | 19 ++++++----- test/unit-test/project.yml | 4 +-- 5 files changed, 55 insertions(+), 51 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 8be137628..38b00d9d6 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -114,63 +114,61 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { // copy data to/from fifo without updating read/write pointers //--------------------------------------------------------------------+ #if CFG_TUSB_FIFO_HWFIFO_API - #if CFG_TUSB_FIFO_ACCESS_DATA_STRIDE == 4 + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE == 4 #define stride_unaligned_write tu_unaligned_write32 #define stride_unaligned_read tu_unaligned_read32 -typedef uint32_t stride_item_t; - #elif CFG_TUSB_FIFO_ACCESS_DATA_STRIDE == 2 +typedef uint32_t hwfifo_item_t; + #elif CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE == 2 #define stride_unaligned_write tu_unaligned_write16 #define stride_unaligned_read tu_unaligned_read16 -typedef uint16_t stride_item_t; +typedef uint16_t hwfifo_item_t; #endif enum { - STRIDE_REMAIN_MASK = sizeof(stride_item_t) - 1u + STRIDE_REMAIN_MASK = sizeof(hwfifo_item_t) - 1u }; void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len) { - const volatile stride_item_t *src = (const volatile stride_item_t *)hwfifo; + const volatile hwfifo_item_t *src = (const volatile hwfifo_item_t *)hwfifo; // Reading full available 16/32-bit hwfifo and write to fifo - uint16_t n_items = len >> (CFG_TUSB_FIFO_ACCESS_DATA_STRIDE >> 1); // len / data_stride; - while (n_items--) { - const stride_item_t tmp = *src; + while (len >= sizeof(hwfifo_item_t)) { + const hwfifo_item_t tmp = *src; stride_unaligned_write(dest, tmp); - dest += sizeof(stride_item_t); + dest += sizeof(hwfifo_item_t); + len -= sizeof(hwfifo_item_t); - #if CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE - src = (const volatile stride_item_t *)((uintptr_t)src + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); + #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE + src = (const volatile hwfifo_item_t *)((uintptr_t)src + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); #endif } // Read the remaining 1 byte (16bit) or 1-3 bytes (32bit) - const uint8_t bytes_rem = len & STRIDE_REMAIN_MASK; - if (bytes_rem) { - const stride_item_t tmp = *src; - memcpy(dest, &tmp, bytes_rem); + if (len > 0) { + const hwfifo_item_t tmp = *src; + memcpy(dest, &tmp, len); } } // Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len) { - volatile stride_item_t *dest = (volatile stride_item_t *)hwfifo; + volatile hwfifo_item_t *dest = (volatile hwfifo_item_t *)hwfifo; // Write full available 16/32 bit words to dest - uint16_t n_items = len >> (CFG_TUSB_FIFO_ACCESS_DATA_STRIDE >> 1); // len / data_stride; - while (n_items--) { + while (len >= sizeof(hwfifo_item_t)) { *dest = stride_unaligned_read(src); - src += sizeof(stride_item_t); + src += sizeof(hwfifo_item_t); + len -= sizeof(hwfifo_item_t); - #if CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE - dest = (volatile stride_item_t *)((uintptr_t)dest + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); + #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE + dest = (volatile hwfifo_item_t *)((uintptr_t)dest + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); #endif } // Write the remaining 1 byte (16bit) or 1-3 bytes (32bit) - const uint8_t bytes_rem = len & STRIDE_REMAIN_MASK; - if (bytes_rem) { - stride_item_t tmp = 0u; - memcpy(&tmp, src, bytes_rem); + if (len > 0) { + hwfifo_item_t tmp = 0u; + memcpy(&tmp, src, len); *dest = tmp; } } @@ -185,7 +183,7 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 #if CFG_TUSB_FIFO_HWFIFO_API if (stride_mode) { - const volatile stride_item_t *hwfifo = (const volatile stride_item_t *)app_buf; + const volatile hwfifo_item_t *hwfifo = (const volatile hwfifo_item_t *)app_buf; if (n <= lin_bytes) { // Linear only case tu_hwfifo_read(hwfifo, ff_buf, n); @@ -200,8 +198,8 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary const uint8_t rem = lin_bytes & STRIDE_REMAIN_MASK; if (rem > 0) { - const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(stride_item_t) - rem); - const stride_item_t tmp = *hwfifo; + const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(hwfifo_item_t) - rem); + const hwfifo_item_t tmp = *hwfifo; tu_scatter_write32(tmp, ff_buf, rem, f->buffer, remrem); wrap_bytes -= remrem; @@ -239,7 +237,7 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd #if CFG_TUSB_FIFO_HWFIFO_API if (stride_mode) { - volatile stride_item_t *hwfifo = (volatile stride_item_t *)app_buf; + volatile hwfifo_item_t *hwfifo = (volatile hwfifo_item_t *)app_buf; if (n <= lin_bytes) { // Linear only case @@ -255,8 +253,8 @@ static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary const uint8_t rem = lin_bytes & STRIDE_REMAIN_MASK; if (rem > 0) { - const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(stride_item_t) - rem); - const stride_item_t scatter = (stride_item_t)tu_scatter_read32(ff_buf, rem, f->buffer, remrem); + const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(hwfifo_item_t) - rem); + const hwfifo_item_t scatter = (hwfifo_item_t)tu_scatter_read32(ff_buf, rem, f->buffer, remrem); *hwfifo = scatter; diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index b17f6a1d6..2473a5605 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -43,12 +43,12 @@ extern "C" { #define CFG_TUSB_FIFO_HWFIFO_API (CFG_TUD_EDPT_DEDICATED_HWFIFO) -#ifndef CFG_TUSB_FIFO_ACCESS_DATA_STRIDE - #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 0 +#ifndef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 0 #endif -#ifndef CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE - #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 0 +#ifndef CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 #endif // Due to the use of unmasked pointers, this FIFO does not suffer from losing @@ -153,7 +153,7 @@ typedef struct { // Moving data from tusb_fifo <-> USB hardware FIFOs e.g. STM32s need to use a special stride mode which reads/writes // data in 2/4 byte chunks from/to a fixed address (USB FIFO register) instead of incrementing the address. For this use // read/write access_mode with stride_mode = true. The STRIPE DATA and ADDR stride must be configured with -// CFG_TUSB_FIFO_ACCESS_DATA_STRIDE and CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE +// CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE and CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE //--------------------------------------------------------------------+ // Setup API @@ -223,7 +223,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const //--------------------------------------------------------------------+ // Hardware FIFO API // Special hardware FIFO/Buffer to hold USB data, usually requires certain access method these can be configured with -// CFG_TUSB_FIFO_ACCESS_DATA_STRIDE (data width) and CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE (address increment) +// CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (data width) and CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE (address increment) // Note: these usually has opposiite direction (read/write) to/from our software FIFO (tu_fifo_t) //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(tu_fifo_t *f, void *hwfifo, uint16_t n) { diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 779c7bc3d..63a6352ac 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -899,7 +899,6 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_ { (void) is_isr; // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1 - TU_ASSERT(ff->item_size == 1); rusb2_reg_t* rusb = RUSB2_REG(rhport); dcd_int_disable(rhport); @@ -912,7 +911,9 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr); - if (!ctr) return; + if (!ctr) { + return; + } dcd_int_disable(rhport); const uint32_t pid = *ctr & 0x3; *ctr = pid | RUSB2_PIPE_CTR_PID_STALL; @@ -924,7 +925,9 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { rusb2_reg_t * rusb = RUSB2_REG(rhport); volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr); - if (!ctr) return; + if (!ctr) { + return; + } dcd_int_disable(rhport); *ctr = RUSB2_PIPE_CTR_SQCLR_Msk; diff --git a/src/tusb_option.h b/src/tusb_option.h index 6129a9532..e22cb7525 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -313,8 +313,8 @@ #define CFG_TUH_EDPT_DEDICATED_HWFIFO 1 #endif - #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 4 // 32bit access - #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 0 // fixed hwfifo address + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32bit access + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 // fixed hwfifo address #endif //------------- ChipIdea -------------// @@ -357,14 +357,14 @@ #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 #if FSDEV_PMA_SIZE == 512 - #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 2 // 16-bit data - #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 4 // 32-bit address increase + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase #elif FSDEV_PMA_SIZE == 1024 - #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 2 // 16-bit data - #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 2 // 16-bit address increase + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 2 // 16-bit address increase #elif FSDEV_PMA_SIZE == 2048 - #define CFG_TUSB_FIFO_ACCESS_DATA_STRIDE 4 // 32-bit data - #define CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE 4 // 32-bit address increase + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32-bit data + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase #endif #endif @@ -376,6 +376,9 @@ //------------ RUSB2 --------------// #if defined(TUP_USBIP_RUSB2) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE // support odd byte access + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 #endif //-------------------------------------------------------------------- diff --git a/test/unit-test/project.yml b/test/unit-test/project.yml index bf7cb5115..186eacbf0 100644 --- a/test/unit-test/project.yml +++ b/test/unit-test/project.yml @@ -129,8 +129,8 @@ :test: - _UNITY_TEST_ - CFG_TUD_EDPT_DEDICATED_HWFIFO=1 - - CFG_TUSB_FIFO_ACCESS_DATA_STRIDE=4 - - CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE=0 + - CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE=4 + - CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE=0 :release: [] # Enable to inject name of a test as a unique compilation symbol into its respective executable build. -- cgit v1.3.1 From 9ab605ef0b7402e72f9540d4b54af607d60cfd7a Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 1 Jan 2026 12:51:05 +0700 Subject: change signature of tu_hwfifo_* to have hwfifo as first parameter --- src/common/tusb_fifo.c | 8 ++++++++ src/common/tusb_fifo.h | 10 ++++++---- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 4 ++-- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 ++-- 4 files changed, 18 insertions(+), 8 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 38b00d9d6..828240b6c 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -167,9 +167,17 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len) { // Write the remaining 1 byte (16bit) or 1-3 bytes (32bit) if (len > 0) { + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE + // odd byte access, write byte per byte e.g for rusb2. No address stride needed + volatile uint8_t *dest8 = (volatile uint8_t *)dest; + for (uint16_t i = 0; i < len; ++i) { + *dest8 = src[i]; + } + #else hwfifo_item_t tmp = 0u; memcpy(&tmp, src, len); *dest = tmp; + #endif } } #endif diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 2473a5605..e1ea1126c 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -226,12 +226,14 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const // CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (data width) and CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE (address increment) // Note: these usually has opposiite direction (read/write) to/from our software FIFO (tu_fifo_t) //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(tu_fifo_t *f, void *hwfifo, uint16_t n) { - return tu_fifo_read_n_access_mode(f, hwfifo, n, true); +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(volatile void *hwfifo, tu_fifo_t *f, + uint16_t n) { + return tu_fifo_read_n_access_mode(f, (void *)(uintptr_t)hwfifo, n, true); } -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_read_to_fifo(tu_fifo_t *f, const void *hwfifo, uint16_t n) { - return tu_fifo_write_n_access_mode(f, hwfifo, n, true); +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_read_to_fifo(const volatile void *hwfifo, tu_fifo_t *f, + uint16_t n) { + return tu_fifo_write_n_access_mode(f, (const void *)(uintptr_t)hwfifo, n, true); } #if CFG_TUSB_FIFO_HWFIFO_API diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index dae921049..fe4f649da 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -324,7 +324,7 @@ static void handle_ctr_rx(uint32_t ep_id) { fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(pma_addr); if (xfer->ff) { - tu_hwfifo_read_to_fifo(xfer->ff, (void *)pma_buf, rx_count); + tu_hwfifo_read_to_fifo(pma_buf, xfer->ff, rx_count); } else { tu_hwfifo_read(pma_buf, xfer->buffer + xfer->queued_len, rx_count); } @@ -722,7 +722,7 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(addr_ptr); if (xfer->ff) { - tu_hwfifo_write_from_fifo(xfer->ff, (void *)(uintptr_t)pma_buf, len); + tu_hwfifo_write_from_fifo(pma_buf, xfer->ff, len); } else { tu_hwfifo_write(pma_buf, &(xfer->buffer[xfer->queued_len]), len); } diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index ea952dbcc..b44b8b56e 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -367,7 +367,7 @@ static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum) { // Push packet to Tx-FIFO if (xfer->ff) { volatile uint32_t* tx_fifo = dwc2->fifo[epnum]; - tu_hwfifo_write_from_fifo(xfer->ff, (void *)(uintptr_t)tx_fifo, xact_bytes); + tu_hwfifo_write_from_fifo(tx_fifo, xfer->ff, xact_bytes); total_bytes_written += xact_bytes; } else { dfifo_write_packet(dwc2, epnum, xfer->buffer, xact_bytes); @@ -889,7 +889,7 @@ static void handle_rxflvl_irq(uint8_t rhport) { if (byte_count != 0) { // Read packet off RxFIFO if (xfer->ff != NULL) { - tu_hwfifo_read_to_fifo(xfer->ff, (const void *)(uintptr_t)rx_fifo, byte_count); + tu_hwfifo_read_to_fifo(rx_fifo, xfer->ff, byte_count); } else { dfifo_read_packet(dwc2, xfer->buffer, byte_count); xfer->buffer += byte_count; -- cgit v1.3.1 From 0b638c5d74ed112535556e47e42a088267bbc527 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 1 Jan 2026 12:57:24 +0700 Subject: rusb2 use tu_hwfifo API to write usb packet --- src/common/tusb_fifo.c | 18 +++++--- src/portable/renesas/rusb2/dcd_rusb2.c | 82 +++++++++++++++++++--------------- src/tusb_option.h | 8 ++-- 3 files changed, 63 insertions(+), 45 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 828240b6c..fe17f1f2b 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -139,14 +139,22 @@ void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len) { len -= sizeof(hwfifo_item_t); #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE - src = (const volatile hwfifo_item_t *)((uintptr_t)src + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); + src = (const volatile hwfifo_item_t *)((uintptr_t)src + CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE); #endif } - // Read the remaining 1 byte (16bit) or 1-3 bytes (32bit) + // Read odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit if (len > 0) { + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE_SUPPORT + // odd byte access, read byte per byte e.g for rusb2. No address stride needed + const volatile uint8_t *src8 = (const volatile uint8_t *)src; + for (uint16_t i = 0; i < len; ++i) { + dest[i] = *src8; + } + #else const hwfifo_item_t tmp = *src; memcpy(dest, &tmp, len); + #endif } } @@ -161,13 +169,13 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len) { len -= sizeof(hwfifo_item_t); #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE - dest = (volatile hwfifo_item_t *)((uintptr_t)dest + CFG_TUSB_FIFO_ACCESS_ADDR_STRIDE); + dest = (volatile hwfifo_item_t *)((uintptr_t)dest + CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE); #endif } - // Write the remaining 1 byte (16bit) or 1-3 bytes (32bit) + // Write odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit if (len > 0) { - #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE_SUPPORT // odd byte access, write byte per byte e.g for rusb2. No address stride needed volatile uint8_t *dest8 = (volatile uint8_t *)dest; for (uint16_t i = 0; i < len; ++i) { diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 63a6352ac..6c6406dcf 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -163,7 +163,7 @@ static inline void pipe_wait_for_ready(rusb2_reg_t * rusb, unsigned num) { //--------------------------------------------------------------------+ // Pipe FIFO //--------------------------------------------------------------------+ - +#if 0 // Write data buffer --> hw fifo static void pipe_write_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo, unsigned len) { @@ -196,18 +196,6 @@ static void pipe_write_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo } } -// Read data buffer <-- hw fifo -static void pipe_read_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo, unsigned len) -{ - (void) rusb; - - // TODO 16/32-bit access for better performance - - uint8_t *p = (uint8_t*)buf; - volatile uint8_t *reg = (volatile uint8_t*)fifo; /* byte access is always at base register address */ - while (len--) *p++ = *reg; -} - // Write data sw fifo --> hw fifo static void pipe_write_packet_ff(rusb2_reg_t * rusb, tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { tu_fifo_buffer_info_t info; @@ -235,8 +223,21 @@ static void pipe_write_packet_ff(rusb2_reg_t * rusb, tu_fifo_t *f, volatile void tu_fifo_advance_read_pointer(f, cnt_written); } +// Read data buffer <-- hw fifo +static void pipe_read_packet(rusb2_reg_t *rusb, void *buf, volatile void *fifo, unsigned len) { + (void)rusb; + + // TODO 16/32-bit access for better performance + + uint8_t *p = (uint8_t *)buf; + volatile uint8_t *reg = (volatile uint8_t *)fifo; /* byte access is always at base register address */ + while (len--) { + *p++ = *reg; + } +} + // Read data sw fifo <-- hw fifo -static void pipe_read_packet_ff(rusb2_reg_t * rusb, tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { +static void pipe_read_packet_ff(rusb2_reg_t *rusb, tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { tu_fifo_buffer_info_t info; tu_fifo_get_write_info(f, &info); @@ -252,15 +253,15 @@ static void pipe_read_packet_ff(rusb2_reg_t * rusb, tu_fifo_t *f, volatile void tu_fifo_advance_write_pointer(f, count); } + #endif //--------------------------------------------------------------------+ // Pipe Transfer //--------------------------------------------------------------------+ -static bool pipe0_xfer_in(rusb2_reg_t* rusb) -{ - pipe_state_t *pipe = &_dcd.pipe[0]; - const unsigned rem = pipe->remaining; +static bool pipe0_xfer_in(rusb2_reg_t *rusb) { + pipe_state_t *pipe = &_dcd.pipe[0]; + const unsigned rem = pipe->remaining; if (!rem) { pipe->buf = NULL; @@ -273,10 +274,13 @@ static bool pipe0_xfer_in(rusb2_reg_t* rusb) if (len) { if (pipe->ff) { - pipe_write_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); + // pipe_write_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); + tu_hwfifo_write_from_fifo(&rusb->CFIFO, (tu_fifo_t *)buf, len); } else { - pipe_write_packet(rusb, buf, (volatile void*)&rusb->CFIFO, len); - pipe->buf = (uint8_t*)buf + len; + // pipe_write_packet(rusb, buf, (volatile void*)&rusb->CFIFO, len); + // TODO check highspeed for 32-bit access + tu_hwfifo_write(&rusb->CFIFO, buf, len); + pipe->buf = (uint8_t *)buf + len; } } @@ -288,10 +292,9 @@ static bool pipe0_xfer_in(rusb2_reg_t* rusb) return false; } -static bool pipe0_xfer_out(rusb2_reg_t* rusb) -{ - pipe_state_t *pipe = &_dcd.pipe[0]; - const unsigned rem = pipe->remaining; +static bool pipe0_xfer_out(rusb2_reg_t *rusb) { + pipe_state_t *pipe = &_dcd.pipe[0]; + const unsigned rem = pipe->remaining; const uint16_t mps = edpt0_max_packet_size(rusb); const uint16_t vld = rusb->CFIFOCTR_b.DTLN; @@ -300,10 +303,12 @@ static bool pipe0_xfer_out(rusb2_reg_t* rusb) if (len) { if (pipe->ff) { - pipe_read_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); + // pipe_read_packet_ff(rusb, (tu_fifo_t *)buf, (volatile void *)&rusb->CFIFO, len); + tu_hwfifo_read_to_fifo(&rusb->CFIFO, (tu_fifo_t *)buf, len); } else { - pipe_read_packet(rusb, buf, (volatile void*)&rusb->CFIFO, len); - pipe->buf = (uint8_t*)buf + len; + // pipe_read_packet(rusb, buf, (volatile void *)&rusb->CFIFO, len); + tu_hwfifo_read(&rusb->CFIFO, buf, len); + pipe->buf = (uint8_t *)buf + len; } } @@ -338,9 +343,12 @@ static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) if (len) { if (pipe->ff) { - pipe_write_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); + // pipe_write_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); + tu_hwfifo_write_from_fifo(&rusb->D0FIFO, (tu_fifo_t *)buf, len); } else { - pipe_write_packet(rusb, buf, (volatile void*)&rusb->D0FIFO, len); + // pipe_write_packet(rusb, buf, (volatile void*)&rusb->D0FIFO, len); + // TODO check highspeed for 32-bit access + tu_hwfifo_write(&rusb->D0FIFO, buf, len); pipe->buf = (uint8_t*)buf + len; } } @@ -362,7 +370,7 @@ static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) pipe_state_t *pipe = &_dcd.pipe[num]; const uint16_t rem = pipe->remaining; - rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_8BIT; + rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT; // RUSB2_FIFOSEL_MBW_8BIT; const uint16_t mps = edpt_max_packet_size(rusb, num); pipe_wait_for_ready(rusb, num); @@ -372,9 +380,11 @@ static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) if (len) { if (pipe->ff) { - pipe_read_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); + // pipe_read_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); + tu_hwfifo_read_to_fifo(&rusb->D0FIFO, (tu_fifo_t *)buf, len); } else { - pipe_read_packet(rusb, buf, (volatile void*)&rusb->D0FIFO, len); + // pipe_read_packet(rusb, buf, (volatile void*)&rusb->D0FIFO, len); + tu_hwfifo_read(&rusb->D0FIFO, buf, len); pipe->buf = (uint8_t*)buf + len; } } @@ -431,14 +441,14 @@ static void process_status_completion(uint8_t rhport) static bool process_pipe0_xfer(rusb2_reg_t* rusb, int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) { /* configure fifo direction and access unit settings */ - if ( ep_addr ) { + if (ep_addr != 0) { /* IN, 2 bytes */ rusb->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); while ( !(rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) ) {} } else { - /* OUT, a byte */ - rusb->CFIFOSEL = RUSB2_FIFOSEL_MBW_8BIT; + /* OUT, 2 bytes */ + rusb->CFIFOSEL = RUSB2_FIFOSEL_MBW_16BIT; // RUSB2_FIFOSEL_MBW_8BIT; while ( rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE ) {} } diff --git a/src/tusb_option.h b/src/tusb_option.h index e22cb7525..8e147707a 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -375,10 +375,10 @@ //------------ RUSB2 --------------// #if defined(TUP_USBIP_RUSB2) - #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE // support odd byte access - #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 + #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE_SUPPORT // support odd byte access + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 #endif //-------------------------------------------------------------------- -- cgit v1.3.1 From 36e8f9d7a184ea5d8ff67331f9a12dd5c809ab30 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 2 Jan 2026 15:55:00 +0700 Subject: support multiple data stride if configured --- src/common/tusb_common.h | 2 +- src/common/tusb_fifo.c | 181 ++++++++++++++++++++++------------------ src/common/tusb_fifo.h | 32 ++++--- test/unit-test/project.yml | 2 +- test/unit-test/test/test_fifo.c | 88 ++++++++++++++++++- 5 files changed, 207 insertions(+), 98 deletions(-) diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index d74760608..17cd26cd9 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -348,7 +348,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_scatter_read32(const uint8_t *bu return result; } -// scatter write 4 bytes to two buffers. Parameter are not checked +// scatter write 4 bytes (LE) to two buffers. Parameter are not checked TU_ATTR_ALWAYS_INLINE static inline void tu_scatter_write32(uint32_t value, uint8_t *buf1, uint8_t len1, uint8_t *buf2, uint8_t len2) { for (uint8_t i = 0; i < len1; ++i) { diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index fe17f1f2b..5749f3a68 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -114,119 +114,136 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { // copy data to/from fifo without updating read/write pointers //--------------------------------------------------------------------+ #if CFG_TUSB_FIFO_HWFIFO_API - #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE == 4 - #define stride_unaligned_write tu_unaligned_write32 - #define stride_unaligned_read tu_unaligned_read32 -typedef uint32_t hwfifo_item_t; - #elif CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE == 2 - #define stride_unaligned_write tu_unaligned_write16 - #define stride_unaligned_read tu_unaligned_read16 -typedef uint16_t hwfifo_item_t; + + #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE + #define HWFIFO_ADDR_NEXT(_const, _hwfifo) \ + _hwfifo = (_const volatile void *)((uintptr_t)(_hwfifo) + CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE) + #else + #define HWFIFO_ADDR_NEXT(_const, _hwfifo) #endif -enum { - STRIDE_REMAIN_MASK = sizeof(hwfifo_item_t) - 1u -}; +static void stride_write(volatile void *hwfifo, const void *src, uint8_t data_stride) { + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 + if (data_stride == 4) { + *((volatile uint32_t *)hwfifo) = tu_unaligned_read32(src); + } + #endif + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 2 + if (data_stride == 2) { + *((volatile uint16_t *)hwfifo) = tu_unaligned_read16(src); + } + #endif +} -void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len) { - const volatile hwfifo_item_t *src = (const volatile hwfifo_item_t *)hwfifo; +static void stride_read(const volatile void *hwfifo, void *dest, uint8_t data_stride) { + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 + if (data_stride == 4) { + tu_unaligned_write32(dest, *((const volatile uint32_t *)hwfifo)); + } + #endif + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 2 + if (data_stride == 2) { + tu_unaligned_write16(dest, *((const volatile uint16_t *)hwfifo)); + } + #endif +} +void tu_hwfifo_read_access_mode(const volatile void *hwfifo, uint8_t *dest, uint16_t len, uint8_t data_stride) { // Reading full available 16/32-bit hwfifo and write to fifo - while (len >= sizeof(hwfifo_item_t)) { - const hwfifo_item_t tmp = *src; - stride_unaligned_write(dest, tmp); - dest += sizeof(hwfifo_item_t); - len -= sizeof(hwfifo_item_t); + while (len >= data_stride) { + stride_read(hwfifo, dest, data_stride); + dest += data_stride; + len -= data_stride; - #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE - src = (const volatile hwfifo_item_t *)((uintptr_t)src + CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE); - #endif + HWFIFO_ADDR_NEXT(const, hwfifo); } // Read odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit if (len > 0) { #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE_SUPPORT // odd byte access, read byte per byte e.g for rusb2. No address stride needed - const volatile uint8_t *src8 = (const volatile uint8_t *)src; + const volatile uint8_t *src8 = (const volatile uint8_t *)hwfifo; for (uint16_t i = 0; i < len; ++i) { - dest[i] = *src8; + dest[i] = *(src8 + 3); } #else - const hwfifo_item_t tmp = *src; + uint32_t tmp; + stride_read(hwfifo, &tmp, data_stride); memcpy(dest, &tmp, len); #endif } } // Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode -void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len) { - volatile hwfifo_item_t *dest = (volatile hwfifo_item_t *)hwfifo; - +void tu_hwfifo_write_access_mode(volatile void *hwfifo, const uint8_t *src, uint16_t len, uint8_t data_stride) { // Write full available 16/32 bit words to dest - while (len >= sizeof(hwfifo_item_t)) { - *dest = stride_unaligned_read(src); - src += sizeof(hwfifo_item_t); - len -= sizeof(hwfifo_item_t); + while (len >= data_stride) { + stride_write(hwfifo, src, data_stride); + src += data_stride; + len -= data_stride; - #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE - dest = (volatile hwfifo_item_t *)((uintptr_t)dest + CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE); - #endif + HWFIFO_ADDR_NEXT(, hwfifo); } // Write odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit if (len > 0) { #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE_SUPPORT // odd byte access, write byte per byte e.g for rusb2. No address stride needed - volatile uint8_t *dest8 = (volatile uint8_t *)dest; + volatile uint8_t *dest8 = (volatile uint8_t *)hwfifo; for (uint16_t i = 0; i < len; ++i) { - *dest8 = src[i]; + *(dest8 + 3) = src[i]; } #else - hwfifo_item_t tmp = 0u; + uint32_t tmp = 0u; memcpy(&tmp, src, len); - *dest = tmp; + stride_write(hwfifo, &tmp, data_stride); #endif } } #endif // send n items to fifo WITHOUT updating write pointer -static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, bool stride_mode) { - (void)stride_mode; +static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, uint8_t data_stride) { + (void)data_stride; uint16_t lin_bytes = f->depth - wr_ptr; uint16_t wrap_bytes = n - lin_bytes; uint8_t *ff_buf = f->buffer + wr_ptr; #if CFG_TUSB_FIFO_HWFIFO_API - if (stride_mode) { - const volatile hwfifo_item_t *hwfifo = (const volatile hwfifo_item_t *)app_buf; + if (data_stride) { + const volatile void *hwfifo = (const volatile void *)app_buf; if (n <= lin_bytes) { // Linear only case - tu_hwfifo_read(hwfifo, ff_buf, n); + tu_hwfifo_read_access_mode(hwfifo, ff_buf, n, data_stride); } else { // Wrap around case // Write full words to linear part of buffer - uint16_t lin_nitems_bytes = lin_bytes & ~STRIDE_REMAIN_MASK; - tu_hwfifo_read(hwfifo, ff_buf, lin_nitems_bytes); - ff_buf += lin_nitems_bytes; + const uint32_t odd_mask = data_stride - 1; + uint16_t lin_even = lin_bytes & ~odd_mask; + tu_hwfifo_read_access_mode(hwfifo, ff_buf, lin_even, data_stride); + ff_buf += lin_even; // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary - const uint8_t rem = lin_bytes & STRIDE_REMAIN_MASK; - if (rem > 0) { - const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(hwfifo_item_t) - rem); - const hwfifo_item_t tmp = *hwfifo; - tu_scatter_write32(tmp, ff_buf, rem, f->buffer, remrem); - - wrap_bytes -= remrem; - ff_buf = f->buffer + remrem; // wrap around + // combine it with the wrapped part to form a full word for data stride + const uint8_t lin_odd = lin_bytes & odd_mask; + if (lin_odd > 0) { + const uint8_t wrap_odd = (uint8_t)tu_min16(wrap_bytes, data_stride - lin_odd); + uint32_t tmp = 0; + stride_read(hwfifo, &tmp, data_stride); + HWFIFO_ADDR_NEXT(const, hwfifo); + + tu_scatter_write32(tmp, ff_buf, lin_odd, f->buffer, wrap_odd); + + wrap_bytes -= wrap_odd; + ff_buf = f->buffer + wrap_odd; // wrap around } else { - ff_buf = f->buffer; // wrap around to beginning + ff_buf = f->buffer; // wrap around to beginning } // Write data wrapped part if (wrap_bytes > 0) { - tu_hwfifo_read(hwfifo, ff_buf, wrap_bytes); + tu_hwfifo_read_access_mode(hwfifo, ff_buf, wrap_bytes, data_stride); } } } else @@ -245,44 +262,46 @@ static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint1 } // get n items from fifo WITHOUT updating read pointer -static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, bool stride_mode) { - (void)stride_mode; +static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, uint8_t data_stride) { + (void)data_stride; uint16_t lin_bytes = f->depth - rd_ptr; uint16_t wrap_bytes = n - lin_bytes; // only used if wrapped const uint8_t *ff_buf = f->buffer + rd_ptr; #if CFG_TUSB_FIFO_HWFIFO_API - if (stride_mode) { - volatile hwfifo_item_t *hwfifo = (volatile hwfifo_item_t *)app_buf; + if (data_stride) { + volatile void *hwfifo = (volatile void *)app_buf; if (n <= lin_bytes) { // Linear only case - tu_hwfifo_write(hwfifo, ff_buf, n); + tu_hwfifo_write_access_mode(hwfifo, ff_buf, n, data_stride); } else { // Wrap around case // Read full words from linear part - uint16_t lin_nitems_bytes = lin_bytes & ~STRIDE_REMAIN_MASK; - tu_hwfifo_write(hwfifo, ff_buf, lin_nitems_bytes); - ff_buf += lin_nitems_bytes; + const uint32_t odd_mask = data_stride - 1; + uint16_t lin_even = lin_bytes & ~odd_mask; + tu_hwfifo_write_access_mode(hwfifo, ff_buf, lin_even, data_stride); + ff_buf += lin_even; // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary - const uint8_t rem = lin_bytes & STRIDE_REMAIN_MASK; - if (rem > 0) { - const uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, sizeof(hwfifo_item_t) - rem); - const hwfifo_item_t scatter = (hwfifo_item_t)tu_scatter_read32(ff_buf, rem, f->buffer, remrem); + const uint8_t lin_odd = lin_bytes & odd_mask; + if (lin_odd > 0) { + const uint8_t wrap_odd = (uint8_t)tu_min16(wrap_bytes, data_stride - lin_odd); + const uint32_t scatter = tu_scatter_read32(ff_buf, lin_odd, f->buffer, wrap_odd); - *hwfifo = scatter; + stride_write(hwfifo, &scatter, data_stride); + HWFIFO_ADDR_NEXT(, hwfifo); - wrap_bytes -= remrem; - ff_buf = f->buffer + remrem; // wrap around + wrap_bytes -= wrap_odd; + ff_buf = f->buffer + wrap_odd; // wrap around } else { - ff_buf = f->buffer; // wrap around to beginning + ff_buf = f->buffer; // wrap around to beginning } // Read data wrapped part if (wrap_bytes > 0) { - tu_hwfifo_write(hwfifo, ff_buf, wrap_bytes); + tu_hwfifo_write_access_mode(hwfifo, ff_buf, wrap_bytes, data_stride); } } } else @@ -349,7 +368,7 @@ static uint16_t correct_read_index(tu_fifo_t *f, uint16_t wr_idx) { // Works on local copies of w and r // Must be protected by read mutex since in case of an overflow read pointer gets modified uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, - bool stride_mode) { + uint8_t data_stride) { uint16_t count = tu_ff_overflow_count(f->depth, wr_idx, rd_idx); if (count == 0) { return 0; // nothing to peek @@ -366,7 +385,7 @@ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, ui } const uint16_t rd_ptr = idx2ptr(f->depth, rd_idx); - ff_pull_n(f, p_buffer, n, rd_ptr, stride_mode); + ff_pull_n(f, p_buffer, n, rd_ptr, data_stride); return n; } @@ -374,17 +393,17 @@ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, ui // Read n items without removing it from the FIFO, correct read pointer if overflowed uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n) { ff_lock(f->mutex_rd); - const uint16_t ret = tu_fifo_peek_n_access_mode(f, p_buffer, n, f->wr_idx, f->rd_idx, false); + const uint16_t ret = tu_fifo_peek_n_access_mode(f, p_buffer, n, f->wr_idx, f->rd_idx, 0); ff_unlock(f->mutex_rd); return ret; } // Read n items from fifo with access mode -uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, bool stride_mode) { +uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, uint8_t data_stride) { ff_lock(f->mutex_rd); // Peek the data: f->rd_idx might get modified in case of an overflow so we can not use a local variable - n = tu_fifo_peek_n_access_mode(f, buffer, n, f->wr_idx, f->rd_idx, stride_mode); + n = tu_fifo_peek_n_access_mode(f, buffer, n, f->wr_idx, f->rd_idx, data_stride); f->rd_idx = advance_index(f->depth, f->rd_idx, n); ff_unlock(f->mutex_rd); @@ -392,7 +411,7 @@ uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, bool } // Write n items to fifo with access mode -uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, bool stride_mode) { +uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, uint8_t data_stride) { if (n == 0) { return 0; } @@ -418,7 +437,7 @@ uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, // function! Since it would end up in a race condition with read functions! if (n >= f->depth) { // Only copy last part - if (!stride_mode) { + if (!data_stride) { buf8 += (n - f->depth); } else { // TODO should read from hw fifo to discard data, however reading an odd number could @@ -454,7 +473,7 @@ uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, const uint16_t wr_ptr = idx2ptr(f->depth, wr_idx); TU_LOG(TU_FIFO_DBG, "actual_n = %u, wr_ptr = %u", n, wr_ptr); - ff_push_n(f, buf8, n, wr_ptr, stride_mode); + ff_push_n(f, buf8, n, wr_ptr, data_stride); f->wr_idx = advance_index(f->depth, wr_idx, n); TU_LOG(TU_FIFO_DBG, "\tnew_wr = %u\r\n", f->wr_idx); diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index e1ea1126c..f2939aec0 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -193,7 +193,7 @@ void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info); // peek() will correct/re-index read pointer in case of an overflowed fifo to form a full fifo //--------------------------------------------------------------------+ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, - bool stride_mode); + uint8_t data_stride); bool tu_fifo_peek(tu_fifo_t *f, void *p_buffer); uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n); @@ -201,10 +201,10 @@ uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n); // Read API // peek() + advance read index //--------------------------------------------------------------------+ -uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, bool stride_mode); +uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, uint8_t data_stride); bool tu_fifo_read(tu_fifo_t *f, void *buffer); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n) { - return tu_fifo_read_n_access_mode(f, buffer, n, false); + return tu_fifo_read_n_access_mode(f, buffer, n, 0); } // discard first n items from fifo i.e advance read pointer by n with mutex @@ -214,10 +214,10 @@ uint16_t tu_fifo_discard_n(tu_fifo_t *f, uint16_t n); //--------------------------------------------------------------------+ // Write API //--------------------------------------------------------------------+ -uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, bool stride_mode); +uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, uint8_t data_stride); bool tu_fifo_write(tu_fifo_t *f, const void *data); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n) { - return tu_fifo_write_n_access_mode(f, data, n, false); + return tu_fifo_write_n_access_mode(f, data, n, 0); } //--------------------------------------------------------------------+ @@ -228,20 +228,30 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(volatile void *hwfifo, tu_fifo_t *f, uint16_t n) { - return tu_fifo_read_n_access_mode(f, (void *)(uintptr_t)hwfifo, n, true); + return tu_fifo_read_n_access_mode(f, (void *)(uintptr_t)hwfifo, n, CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE); } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_read_to_fifo(const volatile void *hwfifo, tu_fifo_t *f, uint16_t n) { - return tu_fifo_write_n_access_mode(f, (const void *)(uintptr_t)hwfifo, n, true); + return tu_fifo_write_n_access_mode(f, (const void *)(uintptr_t)hwfifo, n, CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE); } #if CFG_TUSB_FIFO_HWFIFO_API -// read from hwfifo to buffer -void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len); +// read from hwfifo to buffer with access mode +void tu_hwfifo_read_access_mode(const volatile void *hwfifo, uint8_t *dest, uint16_t len, uint8_t data_stride); -// write to hwfifo from buffer -void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len); +// read from hwfifo to buffer with default data stride +TU_ATTR_ALWAYS_INLINE static inline void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len) { + tu_hwfifo_read_access_mode(hwfifo, dest, len, CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE); +} + +// write to hwfifo from buffer with access mode +void tu_hwfifo_write_access_mode(volatile void *hwfifo, const uint8_t *src, uint16_t len, uint8_t data_stride); + +// write to hwfifo from buffer with default data stride +TU_ATTR_ALWAYS_INLINE static inline void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len) { + tu_hwfifo_write_access_mode(hwfifo, src, len, CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE); +} #endif //--------------------------------------------------------------------+ diff --git a/test/unit-test/project.yml b/test/unit-test/project.yml index 186eacbf0..be3fc3de0 100644 --- a/test/unit-test/project.yml +++ b/test/unit-test/project.yml @@ -129,7 +129,7 @@ :test: - _UNITY_TEST_ - CFG_TUD_EDPT_DEDICATED_HWFIFO=1 - - CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE=4 + - CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE=6 - CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE=0 :release: [] diff --git a/test/unit-test/test/test_fifo.c b/test/unit-test/test/test_fifo.c index 453930a2f..6e1c13d6d 100644 --- a/test/unit-test/test/test_fifo.c +++ b/test/unit-test/test/test_fifo.c @@ -403,7 +403,7 @@ void test_write_n_fixed_addr_rw32_nowrap(void) { for (uint8_t n = 1; n <= 8; n++) { tu_fifo_clear(ff); - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, true); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, 4); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); @@ -425,7 +425,7 @@ void test_write_n_fixed_addr_rw32_wrapped(void) { ff->wr_idx = FIFO_SIZE - 3; ff->rd_idx = FIFO_SIZE - 3; - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, true); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, 4); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); @@ -445,7 +445,7 @@ void test_read_n_fixed_addr_rw32_nowrap(void) { tu_fifo_write_n(ff, pattern, 8); uint32_t reg = 0; - uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, true); + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, 4); TEST_ASSERT_EQUAL(n, read_cnt); TEST_ASSERT_EQUAL(8 - n, tu_fifo_count(ff)); @@ -469,7 +469,7 @@ void test_read_n_fixed_addr_rw32_wrapped(void) { } uint32_t reg = 0; - uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, true); + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, 4); TEST_ASSERT_EQUAL(n, read_cnt); TEST_ASSERT_EQUAL(0, tu_fifo_count(ff)); @@ -477,6 +477,86 @@ void test_read_n_fixed_addr_rw32_wrapped(void) { } } +void test_write_n_fixed_addr_rw16_nowrap(void) { + tu_fifo_clear(ff); + + volatile uint16_t reg = 0x1122; + uint8_t expected[6] = {0x22, 0x11, 0x22, 0x11, 0x22, 0x11}; + + for (uint8_t n = 1; n <= 6; n++) { + tu_fifo_clear(ff); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, 2); + TEST_ASSERT_EQUAL(n, written); + TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); + + uint8_t out[6] = {0}; + tu_fifo_read_n(ff, out, n); + TEST_ASSERT_EQUAL_UINT8_ARRAY(expected, out, n); + } +} + +void test_write_n_fixed_addr_rw16_wrapped(void) { + tu_fifo_clear(ff); + + volatile uint16_t reg = 0xA1B2; + uint8_t expected[6] = {0xB2, 0xA1, 0xB2, 0xA1, 0xB2, 0xA1}; + + for (uint8_t n = 1; n <= 6; n++) { + tu_fifo_clear(ff); + // Position the fifo near the end so writes wrap + ff->wr_idx = FIFO_SIZE - 3; + ff->rd_idx = FIFO_SIZE - 3; + + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, 2); + TEST_ASSERT_EQUAL(n, written); + TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); + + uint8_t out[6] = {0}; + tu_fifo_read_n(ff, out, n); + TEST_ASSERT_EQUAL_UINT8_ARRAY(expected, out, n); + } +} + +void test_read_n_fixed_addr_rw16_nowrap(void) { + uint8_t pattern[6] = {0x10, 0x21, 0x32, 0x43, 0x54, 0x65}; + uint16_t reg_expected[6] = {0x0010, 0x2110, 0x0032, 0x4332, 0x0054, 0x6554}; + + for (uint8_t n = 1; n <= 6; n++) { + tu_fifo_clear(ff); + tu_fifo_write_n(ff, pattern, 6); + + uint16_t reg = 0; + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, 2); + TEST_ASSERT_EQUAL(n, read_cnt); + TEST_ASSERT_EQUAL(6 - n, tu_fifo_count(ff)); + + TEST_ASSERT_EQUAL_HEX16(reg_expected[n - 1], reg); + } +} + +void test_read_n_fixed_addr_rw16_wrapped(void) { + uint8_t pattern[6] = {0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5}; + uint16_t reg_expected[6] = {0x00F0, 0xE1F0, 0x00D2, 0xC3D2, 0x00B4, 0xA5B4}; + + for (uint8_t n = 1; n <= 6; n++) { + tu_fifo_clear(ff); + ff->rd_idx = FIFO_SIZE - 1; + ff->wr_idx = (uint16_t)(ff->rd_idx + n); + + for (uint8_t i = 0; i < n; i++) { + uint8_t idx = (uint8_t)((ff->rd_idx + i) % FIFO_SIZE); + ff->buffer[idx] = pattern[i]; + } + + uint16_t reg = 0; + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, 2); + TEST_ASSERT_EQUAL(n, read_cnt); + TEST_ASSERT_EQUAL(0, tu_fifo_count(ff)); + + TEST_ASSERT_EQUAL_HEX16(reg_expected[n - 1], reg); + } +} + void test_get_read_info_advanced_cases(void) { tu_fifo_clear(ff); -- cgit v1.3.1 From b87c2fcc9f68f6e0f5e8add653ee0c67d3467e02 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 2 Jan 2026 23:57:48 +0700 Subject: refactor hwfifo pull/push --- src/common/tusb_common.h | 2 +- src/common/tusb_fifo.c | 219 ++++++++++++++++++++++++++--------------------- src/common/tusb_fifo.h | 16 +--- 3 files changed, 125 insertions(+), 112 deletions(-) diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 17cd26cd9..6ac1405f3 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -329,7 +329,7 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write16(void *mem, uint16_ #endif -// scatter read 4 bytes from two buffers. Parameter are not checked +// scatter read 4 bytes from two buffers (LE). Parameter are not checked TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_scatter_read32(const uint8_t *buf1, uint8_t len1, const uint8_t *buf2, uint8_t len2) { uint32_t result = 0; diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 5749f3a68..5988f16d8 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -114,7 +114,6 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { // copy data to/from fifo without updating read/write pointers //--------------------------------------------------------------------+ #if CFG_TUSB_FIFO_HWFIFO_API - #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE #define HWFIFO_ADDR_NEXT(_const, _hwfifo) \ _hwfifo = (_const volatile void *)((uintptr_t)(_hwfifo) + CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE) @@ -148,7 +147,7 @@ static void stride_read(const volatile void *hwfifo, void *dest, uint8_t data_st #endif } -void tu_hwfifo_read_access_mode(const volatile void *hwfifo, uint8_t *dest, uint16_t len, uint8_t data_stride) { +void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, uint8_t data_stride) { // Reading full available 16/32-bit hwfifo and write to fifo while (len >= data_stride) { stride_read(hwfifo, dest, data_stride); @@ -175,7 +174,7 @@ void tu_hwfifo_read_access_mode(const volatile void *hwfifo, uint8_t *dest, uint } // Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode -void tu_hwfifo_write_access_mode(volatile void *hwfifo, const uint8_t *src, uint16_t len, uint8_t data_stride) { +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, uint8_t data_stride) { // Write full available 16/32 bit words to dest while (len >= data_stride) { stride_write(hwfifo, src, data_stride); @@ -200,122 +199,131 @@ void tu_hwfifo_write_access_mode(volatile void *hwfifo, const uint8_t *src, uint #endif } } -#endif -// send n items to fifo WITHOUT updating write pointer -static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, uint8_t data_stride) { - (void)data_stride; +static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, uint8_t data_stride) { uint16_t lin_bytes = f->depth - wr_ptr; uint16_t wrap_bytes = n - lin_bytes; uint8_t *ff_buf = f->buffer + wr_ptr; -#if CFG_TUSB_FIFO_HWFIFO_API - if (data_stride) { - const volatile void *hwfifo = (const volatile void *)app_buf; - if (n <= lin_bytes) { - // Linear only case - tu_hwfifo_read_access_mode(hwfifo, ff_buf, n, data_stride); - } else { - // Wrap around case - - // Write full words to linear part of buffer - const uint32_t odd_mask = data_stride - 1; - uint16_t lin_even = lin_bytes & ~odd_mask; - tu_hwfifo_read_access_mode(hwfifo, ff_buf, lin_even, data_stride); - ff_buf += lin_even; - - // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary - // combine it with the wrapped part to form a full word for data stride - const uint8_t lin_odd = lin_bytes & odd_mask; - if (lin_odd > 0) { - const uint8_t wrap_odd = (uint8_t)tu_min16(wrap_bytes, data_stride - lin_odd); - uint32_t tmp = 0; - stride_read(hwfifo, &tmp, data_stride); - HWFIFO_ADDR_NEXT(const, hwfifo); - - tu_scatter_write32(tmp, ff_buf, lin_odd, f->buffer, wrap_odd); - - wrap_bytes -= wrap_odd; - ff_buf = f->buffer + wrap_odd; // wrap around - } else { - ff_buf = f->buffer; // wrap around to beginning + const volatile void *hwfifo = (const volatile void *)app_buf; + if (n <= lin_bytes) { + // Linear only case + tu_hwfifo_read(hwfifo, ff_buf, n, data_stride); + } else { + // Wrap around case + + // Write full words to linear part of buffer + const uint32_t odd_mask = data_stride - 1; + uint16_t lin_even = lin_bytes & ~odd_mask; + tu_hwfifo_read(hwfifo, ff_buf, lin_even, data_stride); + ff_buf += lin_even; + + // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary + // combine it with the wrapped part to form a full word for data stride + const uint8_t lin_odd = lin_bytes & odd_mask; + if (lin_odd > 0) { + const uint8_t wrap_odd = (uint8_t)tu_min16(wrap_bytes, data_stride - lin_odd); + uint8_t buf_temp[4]; + tu_hwfifo_read(hwfifo, buf_temp, lin_odd + wrap_odd, data_stride); + + for (uint8_t i = 0; i < lin_odd; ++i) { + ff_buf[i] = buf_temp[i]; } - - // Write data wrapped part - if (wrap_bytes > 0) { - tu_hwfifo_read_access_mode(hwfifo, ff_buf, wrap_bytes, data_stride); + for (uint8_t i = 0; i < wrap_odd; ++i) { + f->buffer[i] = buf_temp[lin_odd + i]; } - } - } else -#endif - { - // single byte access - if (n <= lin_bytes) { - // Linear only case - memcpy(ff_buf, app_buf, n); + + wrap_bytes -= wrap_odd; + ff_buf = f->buffer + wrap_odd; // wrap around } else { - // Wrap around case - memcpy(ff_buf, app_buf, lin_bytes); // linear part - memcpy(f->buffer, ((const uint8_t *)app_buf) + lin_bytes, wrap_bytes); // wrapped part + ff_buf = f->buffer; // wrap around to beginning + } + + // Write data wrapped part + if (wrap_bytes > 0) { + tu_hwfifo_read(hwfifo, ff_buf, wrap_bytes, data_stride); } } } -// get n items from fifo WITHOUT updating read pointer -static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, uint8_t data_stride) { - (void)data_stride; +static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, uint8_t data_stride) { uint16_t lin_bytes = f->depth - rd_ptr; uint16_t wrap_bytes = n - lin_bytes; // only used if wrapped const uint8_t *ff_buf = f->buffer + rd_ptr; -#if CFG_TUSB_FIFO_HWFIFO_API - if (data_stride) { - volatile void *hwfifo = (volatile void *)app_buf; + volatile void *hwfifo = (volatile void *)app_buf; + + if (n <= lin_bytes) { + // Linear only case + tu_hwfifo_write(hwfifo, ff_buf, n, data_stride); + } else { + // Wrap around case + + // Read full words from linear part + const uint32_t odd_mask = data_stride - 1; + uint16_t lin_even = lin_bytes & ~odd_mask; + tu_hwfifo_write(hwfifo, ff_buf, lin_even, data_stride); + ff_buf += lin_even; + + // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary + const uint8_t lin_odd = lin_bytes & odd_mask; + if (lin_odd > 0) { + const uint8_t wrap_odd = (uint8_t)tu_min16(wrap_bytes, data_stride - lin_odd); + + uint8_t buf_temp[4]; + for (uint8_t i = 0; i < lin_odd; ++i) { + buf_temp[i] = ff_buf[i]; + } + for (uint8_t i = 0; i < wrap_odd; ++i) { + buf_temp[lin_odd + i] = f->buffer[i]; + } + + tu_hwfifo_write(hwfifo, buf_temp, lin_odd + wrap_odd, data_stride); - if (n <= lin_bytes) { - // Linear only case - tu_hwfifo_write_access_mode(hwfifo, ff_buf, n, data_stride); + wrap_bytes -= wrap_odd; + ff_buf = f->buffer + wrap_odd; // wrap around } else { - // Wrap around case + ff_buf = f->buffer; // wrap around to beginning + } - // Read full words from linear part - const uint32_t odd_mask = data_stride - 1; - uint16_t lin_even = lin_bytes & ~odd_mask; - tu_hwfifo_write_access_mode(hwfifo, ff_buf, lin_even, data_stride); - ff_buf += lin_even; + // Read data wrapped part + if (wrap_bytes > 0) { + tu_hwfifo_write(hwfifo, ff_buf, wrap_bytes, data_stride); + } + } +} +#endif - // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary - const uint8_t lin_odd = lin_bytes & odd_mask; - if (lin_odd > 0) { - const uint8_t wrap_odd = (uint8_t)tu_min16(wrap_bytes, data_stride - lin_odd); - const uint32_t scatter = tu_scatter_read32(ff_buf, lin_odd, f->buffer, wrap_odd); +// send n items to fifo WITHOUT updating write pointer +static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr) { + uint16_t lin_bytes = f->depth - wr_ptr; + uint16_t wrap_bytes = n - lin_bytes; + uint8_t *ff_buf = f->buffer + wr_ptr; - stride_write(hwfifo, &scatter, data_stride); - HWFIFO_ADDR_NEXT(, hwfifo); + if (n <= lin_bytes) { + // Linear only case + memcpy(ff_buf, app_buf, n); + } else { + // Wrap around case + memcpy(ff_buf, app_buf, lin_bytes); // linear part + memcpy(f->buffer, ((const uint8_t *)app_buf) + lin_bytes, wrap_bytes); // wrapped part + } +} - wrap_bytes -= wrap_odd; - ff_buf = f->buffer + wrap_odd; // wrap around - } else { - ff_buf = f->buffer; // wrap around to beginning - } +// get n items from fifo WITHOUT updating read pointer +static void ff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr) { + uint16_t lin_bytes = f->depth - rd_ptr; + uint16_t wrap_bytes = n - lin_bytes; // only used if wrapped + const uint8_t *ff_buf = f->buffer + rd_ptr; - // Read data wrapped part - if (wrap_bytes > 0) { - tu_hwfifo_write_access_mode(hwfifo, ff_buf, wrap_bytes, data_stride); - } - } - } else -#endif - { - // single byte access - if (n <= lin_bytes) { - // Linear only - memcpy(app_buf, ff_buf, n); - } else { - // Wrap around - memcpy(app_buf, ff_buf, lin_bytes); // linear part - memcpy((uint8_t *)app_buf + lin_bytes, f->buffer, wrap_bytes); // wrapped part - } + // single byte access + if (n <= lin_bytes) { + // Linear only + memcpy(app_buf, ff_buf, n); + } else { + // Wrap around + memcpy(app_buf, ff_buf, lin_bytes); // linear part + memcpy((uint8_t *)app_buf + lin_bytes, f->buffer, wrap_bytes); // wrapped part } } @@ -385,7 +393,15 @@ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, ui } const uint16_t rd_ptr = idx2ptr(f->depth, rd_idx); - ff_pull_n(f, p_buffer, n, rd_ptr, data_stride); + +#if CFG_TUSB_FIFO_HWFIFO_API + if (data_stride > 0) { + hwff_pull_n(f, p_buffer, n, rd_ptr, data_stride); + } else +#endif + { + ff_pull_n(f, p_buffer, n, rd_ptr); + } return n; } @@ -473,7 +489,14 @@ uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, const uint16_t wr_ptr = idx2ptr(f->depth, wr_idx); TU_LOG(TU_FIFO_DBG, "actual_n = %u, wr_ptr = %u", n, wr_ptr); - ff_push_n(f, buf8, n, wr_ptr, data_stride); +#if CFG_TUSB_FIFO_HWFIFO_API + if (data_stride > 0) { + hwff_push_n(f, buf8, n, wr_ptr, data_stride); + } else +#endif + { + ff_push_n(f, buf8, n, wr_ptr); + } f->wr_idx = advance_index(f->depth, wr_idx, n); TU_LOG(TU_FIFO_DBG, "\tnew_wr = %u\r\n", f->wr_idx); diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index f2939aec0..d7e5416fd 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -129,7 +129,6 @@ typedef struct { osal_mutex_t mutex_wr; osal_mutex_t mutex_rd; #endif - } tu_fifo_t; typedef struct { @@ -237,21 +236,12 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_read_to_fifo(const volati } #if CFG_TUSB_FIFO_HWFIFO_API -// read from hwfifo to buffer with access mode -void tu_hwfifo_read_access_mode(const volatile void *hwfifo, uint8_t *dest, uint16_t len, uint8_t data_stride); - -// read from hwfifo to buffer with default data stride -TU_ATTR_ALWAYS_INLINE static inline void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len) { - tu_hwfifo_read_access_mode(hwfifo, dest, len, CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE); -} +// read from hwfifo to buffer +void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, uint8_t data_stride); // write to hwfifo from buffer with access mode -void tu_hwfifo_write_access_mode(volatile void *hwfifo, const uint8_t *src, uint16_t len, uint8_t data_stride); +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, uint8_t data_stride); -// write to hwfifo from buffer with default data stride -TU_ATTR_ALWAYS_INLINE static inline void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len) { - tu_hwfifo_write_access_mode(hwfifo, src, len, CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE); -} #endif //--------------------------------------------------------------------+ -- cgit v1.3.1 From c87f0db45978b6b1f11f151bf5c061b926dba245 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 3 Jan 2026 00:34:49 +0700 Subject: add tu_hwfifo_access_t param to hwfifo API --- src/common/tusb_fifo.c | 73 ++++++++++++--------------- src/common/tusb_fifo.h | 30 ++++++----- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 13 +++-- src/portable/synopsys/dwc2/dcd_dwc2.c | 12 +++-- src/portable/synopsys/dwc2/dwc2_common.c | 54 -------------------- src/portable/synopsys/dwc2/hcd_dwc2.c | 6 ++- test/unit-test/CMakeLists.txt | 1 - test/unit-test/test/test_fifo.c | 26 +++++++--- 8 files changed, 87 insertions(+), 128 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 5988f16d8..e34494c84 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -147,8 +147,9 @@ static void stride_read(const volatile void *hwfifo, void *dest, uint8_t data_st #endif } -void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, uint8_t data_stride) { +void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, const tu_hwfifo_access_t *access_mode) { // Reading full available 16/32-bit hwfifo and write to fifo + const uint8_t data_stride = access_mode->data_stride; while (len >= data_stride) { stride_read(hwfifo, dest, data_stride); dest += data_stride; @@ -159,23 +160,16 @@ void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, ui // Read odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit if (len > 0) { - #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE_SUPPORT - // odd byte access, read byte per byte e.g for rusb2. No address stride needed - const volatile uint8_t *src8 = (const volatile uint8_t *)hwfifo; - for (uint16_t i = 0; i < len; ++i) { - dest[i] = *(src8 + 3); - } - #else uint32_t tmp; stride_read(hwfifo, &tmp, data_stride); memcpy(dest, &tmp, len); - #endif } } // Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode -void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, uint8_t data_stride) { +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode) { // Write full available 16/32 bit words to dest + const uint8_t data_stride = access_mode->data_stride; while (len >= data_stride) { stride_write(hwfifo, src, data_stride); src += data_stride; @@ -186,21 +180,14 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, ui // Write odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit if (len > 0) { - #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE_SUPPORT - // odd byte access, write byte per byte e.g for rusb2. No address stride needed - volatile uint8_t *dest8 = (volatile uint8_t *)hwfifo; - for (uint16_t i = 0; i < len; ++i) { - *(dest8 + 3) = src[i]; - } - #else uint32_t tmp = 0u; memcpy(&tmp, src, len); stride_write(hwfifo, &tmp, data_stride); - #endif } } -static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, uint8_t data_stride) { +static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, + const tu_hwfifo_access_t *access_mode) { uint16_t lin_bytes = f->depth - wr_ptr; uint16_t wrap_bytes = n - lin_bytes; uint8_t *ff_buf = f->buffer + wr_ptr; @@ -208,14 +195,15 @@ static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uin const volatile void *hwfifo = (const volatile void *)app_buf; if (n <= lin_bytes) { // Linear only case - tu_hwfifo_read(hwfifo, ff_buf, n, data_stride); + tu_hwfifo_read(hwfifo, ff_buf, n, access_mode); } else { // Wrap around case // Write full words to linear part of buffer - const uint32_t odd_mask = data_stride - 1; - uint16_t lin_even = lin_bytes & ~odd_mask; - tu_hwfifo_read(hwfifo, ff_buf, lin_even, data_stride); + const uint8_t data_stride = access_mode->data_stride; + const uint32_t odd_mask = data_stride - 1; + uint16_t lin_even = lin_bytes & ~odd_mask; + tu_hwfifo_read(hwfifo, ff_buf, lin_even, access_mode); ff_buf += lin_even; // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary @@ -224,7 +212,7 @@ static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uin if (lin_odd > 0) { const uint8_t wrap_odd = (uint8_t)tu_min16(wrap_bytes, data_stride - lin_odd); uint8_t buf_temp[4]; - tu_hwfifo_read(hwfifo, buf_temp, lin_odd + wrap_odd, data_stride); + tu_hwfifo_read(hwfifo, buf_temp, lin_odd + wrap_odd, access_mode); for (uint8_t i = 0; i < lin_odd; ++i) { ff_buf[i] = buf_temp[i]; @@ -241,12 +229,13 @@ static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uin // Write data wrapped part if (wrap_bytes > 0) { - tu_hwfifo_read(hwfifo, ff_buf, wrap_bytes, data_stride); + tu_hwfifo_read(hwfifo, ff_buf, wrap_bytes, access_mode); } } } -static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, uint8_t data_stride) { +static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, + const tu_hwfifo_access_t *access_mode) { uint16_t lin_bytes = f->depth - rd_ptr; uint16_t wrap_bytes = n - lin_bytes; // only used if wrapped const uint8_t *ff_buf = f->buffer + rd_ptr; @@ -255,14 +244,15 @@ static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t if (n <= lin_bytes) { // Linear only case - tu_hwfifo_write(hwfifo, ff_buf, n, data_stride); + tu_hwfifo_write(hwfifo, ff_buf, n, access_mode); } else { // Wrap around case // Read full words from linear part - const uint32_t odd_mask = data_stride - 1; + const uint8_t data_stride = access_mode->data_stride; + const uint32_t odd_mask = data_stride - 1; uint16_t lin_even = lin_bytes & ~odd_mask; - tu_hwfifo_write(hwfifo, ff_buf, lin_even, data_stride); + tu_hwfifo_write(hwfifo, ff_buf, lin_even, access_mode); ff_buf += lin_even; // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary @@ -278,7 +268,7 @@ static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t buf_temp[lin_odd + i] = f->buffer[i]; } - tu_hwfifo_write(hwfifo, buf_temp, lin_odd + wrap_odd, data_stride); + tu_hwfifo_write(hwfifo, buf_temp, lin_odd + wrap_odd, access_mode); wrap_bytes -= wrap_odd; ff_buf = f->buffer + wrap_odd; // wrap around @@ -288,7 +278,7 @@ static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t // Read data wrapped part if (wrap_bytes > 0) { - tu_hwfifo_write(hwfifo, ff_buf, wrap_bytes, data_stride); + tu_hwfifo_write(hwfifo, ff_buf, wrap_bytes, access_mode); } } } @@ -376,7 +366,7 @@ static uint16_t correct_read_index(tu_fifo_t *f, uint16_t wr_idx) { // Works on local copies of w and r // Must be protected by read mutex since in case of an overflow read pointer gets modified uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, - uint8_t data_stride) { + const tu_hwfifo_access_t *access_mode) { uint16_t count = tu_ff_overflow_count(f->depth, wr_idx, rd_idx); if (count == 0) { return 0; // nothing to peek @@ -395,8 +385,8 @@ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, ui const uint16_t rd_ptr = idx2ptr(f->depth, rd_idx); #if CFG_TUSB_FIFO_HWFIFO_API - if (data_stride > 0) { - hwff_pull_n(f, p_buffer, n, rd_ptr, data_stride); + if (access_mode != NULL) { + hwff_pull_n(f, p_buffer, n, rd_ptr, access_mode); } else #endif { @@ -409,17 +399,17 @@ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, ui // Read n items without removing it from the FIFO, correct read pointer if overflowed uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n) { ff_lock(f->mutex_rd); - const uint16_t ret = tu_fifo_peek_n_access_mode(f, p_buffer, n, f->wr_idx, f->rd_idx, 0); + const uint16_t ret = tu_fifo_peek_n_access_mode(f, p_buffer, n, f->wr_idx, f->rd_idx, NULL); ff_unlock(f->mutex_rd); return ret; } // Read n items from fifo with access mode -uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, uint8_t data_stride) { +uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, const tu_hwfifo_access_t *access_mode) { ff_lock(f->mutex_rd); // Peek the data: f->rd_idx might get modified in case of an overflow so we can not use a local variable - n = tu_fifo_peek_n_access_mode(f, buffer, n, f->wr_idx, f->rd_idx, data_stride); + n = tu_fifo_peek_n_access_mode(f, buffer, n, f->wr_idx, f->rd_idx, access_mode); f->rd_idx = advance_index(f->depth, f->rd_idx, n); ff_unlock(f->mutex_rd); @@ -427,7 +417,8 @@ uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, uint } // Write n items to fifo with access mode -uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, uint8_t data_stride) { +uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, + const tu_hwfifo_access_t *access_mode) { if (n == 0) { return 0; } @@ -453,7 +444,7 @@ uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, // function! Since it would end up in a race condition with read functions! if (n >= f->depth) { // Only copy last part - if (!data_stride) { + if (access_mode == NULL) { buf8 += (n - f->depth); } else { // TODO should read from hw fifo to discard data, however reading an odd number could @@ -490,8 +481,8 @@ uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, TU_LOG(TU_FIFO_DBG, "actual_n = %u, wr_ptr = %u", n, wr_ptr); #if CFG_TUSB_FIFO_HWFIFO_API - if (data_stride > 0) { - hwff_push_n(f, buf8, n, wr_ptr, data_stride); + if (access_mode != NULL) { + hwff_push_n(f, buf8, n, wr_ptr, access_mode); } else #endif { diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index d7e5416fd..6fcc7020c 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -138,6 +138,12 @@ typedef struct { } linear, wrapped; } tu_fifo_buffer_info_t; +// Access mode for hardware fifo read/write +typedef struct { + uint8_t data_stride; + uintptr_t param; +} tu_hwfifo_access_t; + #define TU_FIFO_INIT(_buffer, _depth, _overwritable) \ { \ .buffer = _buffer, \ @@ -192,7 +198,7 @@ void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info); // peek() will correct/re-index read pointer in case of an overflowed fifo to form a full fifo //--------------------------------------------------------------------+ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, - uint8_t data_stride); + const tu_hwfifo_access_t *access_mode); bool tu_fifo_peek(tu_fifo_t *f, void *p_buffer); uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n); @@ -200,10 +206,10 @@ uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n); // Read API // peek() + advance read index //--------------------------------------------------------------------+ -uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, uint8_t data_stride); +uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, const tu_hwfifo_access_t *access_mode); bool tu_fifo_read(tu_fifo_t *f, void *buffer); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n) { - return tu_fifo_read_n_access_mode(f, buffer, n, 0); + return tu_fifo_read_n_access_mode(f, buffer, n, NULL); } // discard first n items from fifo i.e advance read pointer by n with mutex @@ -213,10 +219,10 @@ uint16_t tu_fifo_discard_n(tu_fifo_t *f, uint16_t n); //--------------------------------------------------------------------+ // Write API //--------------------------------------------------------------------+ -uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, uint8_t data_stride); +uint16_t tu_fifo_write_n_access_mode(tu_fifo_t *f, const void *data, uint16_t n, const tu_hwfifo_access_t *access_mode); bool tu_fifo_write(tu_fifo_t *f, const void *data); TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n) { - return tu_fifo_write_n_access_mode(f, data, n, 0); + return tu_fifo_write_n_access_mode(f, data, n, NULL); } //--------------------------------------------------------------------+ @@ -225,22 +231,22 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const // CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (data width) and CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE (address increment) // Note: these usually has opposiite direction (read/write) to/from our software FIFO (tu_fifo_t) //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(volatile void *hwfifo, tu_fifo_t *f, - uint16_t n) { - return tu_fifo_read_n_access_mode(f, (void *)(uintptr_t)hwfifo, n, CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE); +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(volatile void *hwfifo, tu_fifo_t *f, uint16_t n, + const tu_hwfifo_access_t *access_mode) { + return tu_fifo_read_n_access_mode(f, (void *)(uintptr_t)hwfifo, n, access_mode); } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_read_to_fifo(const volatile void *hwfifo, tu_fifo_t *f, - uint16_t n) { - return tu_fifo_write_n_access_mode(f, (const void *)(uintptr_t)hwfifo, n, CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE); + uint16_t n, const tu_hwfifo_access_t *access_mode) { + return tu_fifo_write_n_access_mode(f, (const void *)(uintptr_t)hwfifo, n, access_mode); } #if CFG_TUSB_FIFO_HWFIFO_API // read from hwfifo to buffer -void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, uint8_t data_stride); +void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, const tu_hwfifo_access_t *access_mode); // write to hwfifo from buffer with access mode -void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, uint8_t data_stride); +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode); #endif diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index fe4f649da..2832611ff 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -285,7 +285,8 @@ static void handle_ctr_setup(uint32_t ep_id) { uint16_t rx_addr = btable_get_addr(ep_id, BTABLE_BUF_RX); uint8_t setup_packet[8] TU_ATTR_ALIGNED(4); - tu_hwfifo_read(PMA_BUF_AT(rx_addr), setup_packet, rx_count); + const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; + tu_hwfifo_read(PMA_BUF_AT(rx_addr), setup_packet, rx_count, &access_mode); // Clear CTR RX if another setup packet arrived before this, it will be discarded ep_write_clear_ctr(ep_id, TUSB_DIR_OUT); @@ -323,10 +324,11 @@ static void handle_ctr_rx(uint32_t ep_id) { uint16_t pma_addr = (uint16_t) btable_get_addr(ep_id, buf_id); fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(pma_addr); + const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; if (xfer->ff) { - tu_hwfifo_read_to_fifo(pma_buf, xfer->ff, rx_count); + tu_hwfifo_read_to_fifo(pma_buf, xfer->ff, rx_count, &access_mode); } else { - tu_hwfifo_read(pma_buf, xfer->buffer + xfer->queued_len, rx_count); + tu_hwfifo_read(pma_buf, xfer->buffer + xfer->queued_len, rx_count, &access_mode); } xfer->queued_len += rx_count; @@ -721,10 +723,11 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { uint16_t addr_ptr = (uint16_t)btable_get_addr(ep_ix, buf_id); fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(addr_ptr); + const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; if (xfer->ff) { - tu_hwfifo_write_from_fifo(pma_buf, xfer->ff, len); + tu_hwfifo_write_from_fifo(pma_buf, xfer->ff, len, &access_mode); } else { - tu_hwfifo_write(pma_buf, &(xfer->buffer[xfer->queued_len]), len); + tu_hwfifo_write(pma_buf, &(xfer->buffer[xfer->queued_len]), len, &access_mode); } xfer->queued_len += len; diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index b44b8b56e..2309afd53 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -365,12 +365,13 @@ static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum) { } // Push packet to Tx-FIFO + const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; + volatile uint32_t *tx_fifo = dwc2->fifo[epnum]; if (xfer->ff) { - volatile uint32_t* tx_fifo = dwc2->fifo[epnum]; - tu_hwfifo_write_from_fifo(tx_fifo, xfer->ff, xact_bytes); + tu_hwfifo_write_from_fifo(tx_fifo, xfer->ff, xact_bytes, &access_mode); total_bytes_written += xact_bytes; } else { - dfifo_write_packet(dwc2, epnum, xfer->buffer, xact_bytes); + tu_hwfifo_write(tx_fifo, xfer->buffer, xact_bytes, &access_mode); xfer->buffer += xact_bytes; total_bytes_written += xact_bytes; } @@ -888,10 +889,11 @@ static void handle_rxflvl_irq(uint8_t rhport) { if (byte_count != 0) { // Read packet off RxFIFO + const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; if (xfer->ff != NULL) { - tu_hwfifo_read_to_fifo(rx_fifo, xfer->ff, byte_count); + tu_hwfifo_read_to_fifo(rx_fifo, xfer->ff, byte_count, &access_mode); } else { - dfifo_read_packet(dwc2, xfer->buffer, byte_count); + tu_hwfifo_read(rx_fifo, xfer->buffer, byte_count, &access_mode); xfer->buffer += byte_count; } } diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 980574e12..a7e6188df 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -264,58 +264,4 @@ bool dwc2_core_init(uint8_t rhport, bool is_highspeed, bool is_dma) { // // } -//-------------------------------------------------------------------- -// DFIFO -//-------------------------------------------------------------------- -// Read a single data packet from receive DFIFO -void dfifo_read_packet(dwc2_regs_t* dwc2, uint8_t* dst, uint16_t len) { - const volatile uint32_t* rx_fifo = dwc2->fifo[0]; - - // Reading full available 32 bit words from fifo - uint16_t word_count = len >> 2; - while (word_count--) { - tu_unaligned_write32(dst, *rx_fifo); - dst += 4; - } - - // Read the remaining 1-3 bytes from fifo - const uint8_t bytes_rem = len & 0x03; - if (bytes_rem != 0) { - const uint32_t tmp = *rx_fifo; - dst[0] = tu_u32_byte0(tmp); - if (bytes_rem > 1) { - dst[1] = tu_u32_byte1(tmp); - } - if (bytes_rem > 2) { - dst[2] = tu_u32_byte2(tmp); - } - } -} - -// Write a single data packet to DFIFO -void dfifo_write_packet(dwc2_regs_t* dwc2, uint8_t fifo_num, const uint8_t* src, uint16_t len) { - volatile uint32_t* tx_fifo = dwc2->fifo[fifo_num]; - - // Pushing full available 32 bit words to fifo - uint16_t word_count = len >> 2; - while (word_count--) { - *tx_fifo = tu_unaligned_read32(src); - src += 4; - } - - // Write the remaining 1-3 bytes into fifo - const uint8_t bytes_rem = len & 0x03; - if (bytes_rem) { - uint32_t tmp_word = src[0]; - if (bytes_rem > 1) { - tmp_word |= (src[1] << 8); - } - if (bytes_rem > 2) { - tmp_word |= (src[2] << 16); - } - - *tx_fifo = tmp_word; - } -} - #endif diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index fc748c85f..570b1c14c 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -856,7 +856,8 @@ static void handle_rxflvl_irq(uint8_t rhport) { hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; if (byte_count > 0) { - dfifo_read_packet(dwc2, edpt->buffer + xfer->xferred_bytes, byte_count); + const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; + tu_hwfifo_read(dwc2->fifo[0], edpt->buffer + xfer->xferred_bytes, byte_count, &access_mode); xfer->xferred_bytes += byte_count; xfer->fifo_bytes = byte_count; } @@ -907,7 +908,8 @@ static bool handle_txfifo_empty(dwc2_regs_t* dwc2, bool is_periodic) { return true; } - dfifo_write_packet(dwc2, ch_id, edpt->buffer + xfer->fifo_bytes, xact_bytes); + const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; + tu_hwfifo_write(dwc2->fifo[ch_id], edpt->buffer + xfer->fifo_bytes, xact_bytes, &access_mode); xfer->fifo_bytes += xact_bytes; } } diff --git a/test/unit-test/CMakeLists.txt b/test/unit-test/CMakeLists.txt index 3339361db..b44a91d57 100644 --- a/test/unit-test/CMakeLists.txt +++ b/test/unit-test/CMakeLists.txt @@ -113,7 +113,6 @@ add_ceedling_test( ${CEEDLING_WORKDIR}/../../src/common/tusb_fifo.c "" ) -target_compile_definitions(test_fifo PRIVATE CFG_TUSB_FIFO_ACCESS_FIXED_ADDR_WIDTH=32) add_ceedling_test( test_usbd diff --git a/test/unit-test/test/test_fifo.c b/test/unit-test/test/test_fifo.c index 6e1c13d6d..b9279cb25 100644 --- a/test/unit-test/test/test_fifo.c +++ b/test/unit-test/test/test_fifo.c @@ -40,6 +40,16 @@ tu_fifo_buffer_info_t info; uint8_t test_data[4096]; uint8_t rd_buf[FIFO_SIZE]; +static const tu_hwfifo_access_t hwfifo_access_32 = { + .data_stride = 4, + .param = 0, +}; + +static const tu_hwfifo_access_t hwfifo_access_16 = { + .data_stride = 2, + .param = 0, +}; + void setUp(void) { tu_fifo_clear(ff); memset(&info, 0, sizeof(tu_fifo_buffer_info_t)); @@ -403,7 +413,7 @@ void test_write_n_fixed_addr_rw32_nowrap(void) { for (uint8_t n = 1; n <= 8; n++) { tu_fifo_clear(ff); - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, 4); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, &hwfifo_access_32); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); @@ -425,7 +435,7 @@ void test_write_n_fixed_addr_rw32_wrapped(void) { ff->wr_idx = FIFO_SIZE - 3; ff->rd_idx = FIFO_SIZE - 3; - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, 4); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, &hwfifo_access_32); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); @@ -445,7 +455,7 @@ void test_read_n_fixed_addr_rw32_nowrap(void) { tu_fifo_write_n(ff, pattern, 8); uint32_t reg = 0; - uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, 4); + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, &hwfifo_access_32); TEST_ASSERT_EQUAL(n, read_cnt); TEST_ASSERT_EQUAL(8 - n, tu_fifo_count(ff)); @@ -469,7 +479,7 @@ void test_read_n_fixed_addr_rw32_wrapped(void) { } uint32_t reg = 0; - uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, 4); + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, &hwfifo_access_32); TEST_ASSERT_EQUAL(n, read_cnt); TEST_ASSERT_EQUAL(0, tu_fifo_count(ff)); @@ -485,7 +495,7 @@ void test_write_n_fixed_addr_rw16_nowrap(void) { for (uint8_t n = 1; n <= 6; n++) { tu_fifo_clear(ff); - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, 2); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, &hwfifo_access_16); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); @@ -507,7 +517,7 @@ void test_write_n_fixed_addr_rw16_wrapped(void) { ff->wr_idx = FIFO_SIZE - 3; ff->rd_idx = FIFO_SIZE - 3; - uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, 2); + uint16_t written = tu_fifo_write_n_access_mode(ff, (const void *)®, n, &hwfifo_access_16); TEST_ASSERT_EQUAL(n, written); TEST_ASSERT_EQUAL(n, tu_fifo_count(ff)); @@ -526,7 +536,7 @@ void test_read_n_fixed_addr_rw16_nowrap(void) { tu_fifo_write_n(ff, pattern, 6); uint16_t reg = 0; - uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, 2); + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, &hwfifo_access_16); TEST_ASSERT_EQUAL(n, read_cnt); TEST_ASSERT_EQUAL(6 - n, tu_fifo_count(ff)); @@ -549,7 +559,7 @@ void test_read_n_fixed_addr_rw16_wrapped(void) { } uint16_t reg = 0; - uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, 2); + uint16_t read_cnt = tu_fifo_read_n_access_mode(ff, ®, n, &hwfifo_access_16); TEST_ASSERT_EQUAL(n, read_cnt); TEST_ASSERT_EQUAL(0, tu_fifo_count(ff)); -- cgit v1.3.1 From e158a3dd38fccd99169a3e5b8cecf7a1ac45915e Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 3 Jan 2026 12:49:01 +0700 Subject: hwfifo support custom write/read rusb use custom write enable all hil test for ra4m1 --- src/common/tusb_fifo.c | 45 ++++--- src/portable/renesas/rusb2/dcd_rusb2.c | 226 ++++++++++++++++++++++++--------- src/tusb_option.h | 9 +- test/hil/tinyusb.json | 5 +- 4 files changed, 199 insertions(+), 86 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index e34494c84..f6963a98d 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -121,6 +121,7 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { #define HWFIFO_ADDR_NEXT(_const, _hwfifo) #endif +#ifndef CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE static void stride_write(volatile void *hwfifo, const void *src, uint8_t data_stride) { #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 if (data_stride == 4) { @@ -134,6 +135,28 @@ static void stride_write(volatile void *hwfifo, const void *src, uint8_t data_st #endif } +// Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode) { + // Write full available 16/32 bit words to dest + const uint8_t data_stride = access_mode->data_stride; + while (len >= data_stride) { + stride_write(hwfifo, src, data_stride); + src += data_stride; + len -= data_stride; + + HWFIFO_ADDR_NEXT(, hwfifo); + } + + // Write odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit + if (len > 0) { + uint32_t tmp = 0u; + memcpy(&tmp, src, len); + stride_write(hwfifo, &tmp, data_stride); + } +} + #endif + + #ifndef CFG_TUSB_FIFO_HWFIFO_CUSTOM_READ static void stride_read(const volatile void *hwfifo, void *dest, uint8_t data_stride) { #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 if (data_stride == 4) { @@ -165,26 +188,7 @@ void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, co memcpy(dest, &tmp, len); } } - -// Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode -void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode) { - // Write full available 16/32 bit words to dest - const uint8_t data_stride = access_mode->data_stride; - while (len >= data_stride) { - stride_write(hwfifo, src, data_stride); - src += data_stride; - len -= data_stride; - - HWFIFO_ADDR_NEXT(, hwfifo); - } - - // Write odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit - if (len > 0) { - uint32_t tmp = 0u; - memcpy(&tmp, src, len); - stride_write(hwfifo, &tmp, data_stride); - } -} + #endif static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, const tu_hwfifo_access_t *access_mode) { @@ -390,6 +394,7 @@ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, ui } else #endif { + (void)access_mode; ff_pull_n(f, p_buffer, n, rd_ptr); } diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 6c6406dcf..f8fc7a643 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -57,6 +57,10 @@ enum { PIPE_COUNT = 10, }; +enum { + FIFOSEL_BIGEND = (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0) +}; + typedef struct { void *buf; /* the start address of a transfer data buffer */ uint16_t length; /* the number of bytes in the buffer */ @@ -163,7 +167,8 @@ static inline void pipe_wait_for_ready(rusb2_reg_t * rusb, unsigned num) { //--------------------------------------------------------------------+ // Pipe FIFO //--------------------------------------------------------------------+ -#if 0 +#define USE_HWFIFO 1 + #if !USE_HWFIFO // Write data buffer --> hw fifo static void pipe_write_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo, unsigned len) { @@ -172,27 +177,48 @@ static void pipe_write_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo volatile uint16_t *ff16; volatile uint8_t *ff8; + const uint8_t *buf8 = (const uint8_t *)buf; + // Highspeed FIFO is 32-bit if ( rusb2_is_highspeed_reg(rusb) ) { // TODO 32-bit access for better performance + volatile uint32_t *ff32 = (volatile uint32_t *)fifo; ff16 = (volatile uint16_t*) ((uintptr_t) fifo+2); ff8 = (volatile uint8_t *) ((uintptr_t) fifo+3); - }else { - ff16 = (volatile uint16_t*) fifo; - ff8 = ((volatile uint8_t*) fifo); - } - uint8_t const* buf8 = (uint8_t const*) buf; + while (len >= 4) { + *ff32 = tu_unaligned_read32(buf8); + buf8 += 4; + len -= 4; + } - while (len >= 2) { - *ff16 = tu_unaligned_read16(buf8); - buf8 += 2; - len -= 2; - } + if (len >= 2) { + // switch to 16-bit access + rusb->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | + (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); + *ff16 = tu_unaligned_read16(buf8); + buf8 += 2; + len -= 2; + } - if (len > 0) { - *ff8 = *buf8; - ++buf8; + if (len > 0) { + *ff8 = *buf8; + ++buf8; + } + } else { + ff16 = (volatile uint16_t*) fifo; + ff8 = ((volatile uint8_t *)fifo); + + while (len >= 2) { + *ff16 = tu_unaligned_read16(buf8); + buf8 += 2; + len -= 2; + } + + if (len > 0) { + *ff8 = *buf8; + ++buf8; + } } } @@ -255,6 +281,66 @@ static void pipe_read_packet_ff(rusb2_reg_t *rusb, tu_fifo_t *f, volatile void * } #endif +static void hwfifo_set_mbw(rusb2_reg_t *rusb, uintptr_t hwfifo, uint16_t mbw) { + volatile uint16_t *fifo_sel; + if (hwfifo == (uintptr_t)&rusb->CFIFO) { + fifo_sel = &rusb->CFIFOSEL; + } else if (hwfifo == (uintptr_t)&rusb->D0FIFO) { + fifo_sel = &rusb->D0FIFOSEL; + } else if (hwfifo == (uintptr_t)&rusb->D1FIFO) { + fifo_sel = &rusb->D1FIFOSEL; + } else { + return; + } + + *fifo_sel = (*fifo_sel & ~RUSB2_CFIFOSEL_MBW_Msk) | mbw; +} + +// write to hwfifo from buffer with access mode +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode) { + rusb2_reg_t *rusb = (rusb2_reg_t *)access_mode->param; + const uint8_t *buf8 = (const uint8_t *)src; + + volatile uint16_t *ff16; + volatile uint8_t *ff8; + const bool is_highspeed = rusb2_is_highspeed_reg(rusb); + if (is_highspeed) { + ff16 = (volatile uint16_t *)((uintptr_t)hwfifo + 2); + ff8 = (volatile uint8_t *)((uintptr_t)hwfifo + 3); + } else { + ff16 = (volatile uint16_t *)hwfifo; + ff8 = ((volatile uint8_t *)hwfifo); + } + + // 32-bit access for highspeed + if (is_highspeed) { + volatile uint32_t *ff32 = (volatile uint32_t *)hwfifo; + while (len >= 4) { + *ff32 = tu_unaligned_read32(buf8); + buf8 += 4; + len -= 4; + } + + if (len >= 2) { + // switch to 16-bit access + hwfifo_set_mbw(rusb, (uintptr_t)hwfifo, RUSB2_FIFOSEL_MBW_16BIT); + } + } + + // 16-bit access + while (len >= 2) { + *ff16 = tu_unaligned_read16(buf8); + buf8 += 2; + len -= 2; + } + + // 8-bit access does not need to change MBW + if (len > 0) { + *ff8 = *buf8; + ++buf8; + } +} + //--------------------------------------------------------------------+ // Pipe Transfer //--------------------------------------------------------------------+ @@ -273,13 +359,12 @@ static bool pipe0_xfer_in(rusb2_reg_t *rusb) { void *buf = pipe->buf; if (len) { + tu_hwfifo_access_t access_mode = {.data_stride = (rusb2_is_highspeed_reg(rusb) ? 4u : 2u), + .param = (uintptr_t)rusb}; if (pipe->ff) { - // pipe_write_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); - tu_hwfifo_write_from_fifo(&rusb->CFIFO, (tu_fifo_t *)buf, len); + tu_hwfifo_write_from_fifo(&rusb->CFIFO, (tu_fifo_t *)buf, len, &access_mode); } else { - // pipe_write_packet(rusb, buf, (volatile void*)&rusb->CFIFO, len); - // TODO check highspeed for 32-bit access - tu_hwfifo_write(&rusb->CFIFO, buf, len); + tu_hwfifo_write(&rusb->CFIFO, buf, len, &access_mode); pipe->buf = (uint8_t *)buf + len; } } @@ -302,12 +387,13 @@ static bool pipe0_xfer_out(rusb2_reg_t *rusb) { void *buf = pipe->buf; if (len) { + tu_hwfifo_access_t access_mode = {.data_stride = (rusb2_is_highspeed_reg(rusb) ? 4u : 2u), + .param = (uintptr_t)rusb}; + if (pipe->ff) { - // pipe_read_packet_ff(rusb, (tu_fifo_t *)buf, (volatile void *)&rusb->CFIFO, len); - tu_hwfifo_read_to_fifo(&rusb->CFIFO, (tu_fifo_t *)buf, len); + tu_hwfifo_read_to_fifo(&rusb->CFIFO, (tu_fifo_t *)buf, len, &access_mode); } else { - // pipe_read_packet(rusb, buf, (volatile void *)&rusb->CFIFO, len); - tu_hwfifo_read(&rusb->CFIFO, buf, len); + tu_hwfifo_read(&rusb->CFIFO, buf, len, &access_mode); pipe->buf = (uint8_t *)buf + len; } } @@ -335,21 +421,27 @@ static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) return true; } - rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); - const uint16_t mps = edpt_max_packet_size(rusb, num); + const uint16_t fifo_sel = num | FIFOSEL_BIGEND; + const bool is_highspeed = rusb2_is_highspeed_reg(rusb); + if (is_highspeed) { + rusb->D0FIFOSEL = fifo_sel | RUSB2_FIFOSEL_MBW_32BIT; + } else { + rusb->D0FIFOSEL = fifo_sel | RUSB2_FIFOSEL_MBW_16BIT; + } + + const uint16_t mps = edpt_max_packet_size(rusb, num); pipe_wait_for_ready(rusb, num); - const uint16_t len = tu_min16(rem, mps); - void *buf = pipe->buf; + uint16_t len = tu_min16(rem, mps); + void *buf = pipe->buf; if (len) { + tu_hwfifo_access_t access_mode = {.data_stride = (rusb2_is_highspeed_reg(rusb) ? 4u : 2u), + .param = (uintptr_t)rusb}; if (pipe->ff) { - // pipe_write_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); - tu_hwfifo_write_from_fifo(&rusb->D0FIFO, (tu_fifo_t *)buf, len); + tu_hwfifo_write_from_fifo(&rusb->D0FIFO, (tu_fifo_t *)buf, len, &access_mode); } else { - // pipe_write_packet(rusb, buf, (volatile void*)&rusb->D0FIFO, len); - // TODO check highspeed for 32-bit access - tu_hwfifo_write(&rusb->D0FIFO, buf, len); - pipe->buf = (uint8_t*)buf + len; + tu_hwfifo_write(&rusb->D0FIFO, buf, len, &access_mode); + pipe->buf = (uint8_t *)buf + len; } } @@ -370,7 +462,14 @@ static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) pipe_state_t *pipe = &_dcd.pipe[num]; const uint16_t rem = pipe->remaining; - rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT; // RUSB2_FIFOSEL_MBW_8BIT; + uint16_t fifo_sel = num | FIFOSEL_BIGEND; + if (rusb2_is_highspeed_reg(rusb)) { + fifo_sel |= RUSB2_FIFOSEL_MBW_32BIT; + } else { + fifo_sel |= RUSB2_FIFOSEL_MBW_16BIT; + } + rusb->D0FIFOSEL = fifo_sel; + const uint16_t mps = edpt_max_packet_size(rusb, num); pipe_wait_for_ready(rusb, num); @@ -379,13 +478,13 @@ static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) void *buf = pipe->buf; if (len) { + tu_hwfifo_access_t access_mode = {.data_stride = (rusb2_is_highspeed_reg(rusb) ? 4u : 2u), + .param = (uintptr_t)rusb}; if (pipe->ff) { - // pipe_read_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); - tu_hwfifo_read_to_fifo(&rusb->D0FIFO, (tu_fifo_t *)buf, len); + tu_hwfifo_read_to_fifo(&rusb->D0FIFO, (tu_fifo_t *)buf, len, &access_mode); } else { - // pipe_read_packet(rusb, buf, (volatile void*)&rusb->D0FIFO, len); - tu_hwfifo_read(&rusb->D0FIFO, buf, len); - pipe->buf = (uint8_t*)buf + len; + tu_hwfifo_read(&rusb->D0FIFO, buf, len, &access_mode); + pipe->buf = (uint8_t *)buf + len; } } @@ -438,28 +537,33 @@ static void process_status_completion(uint8_t rhport) dcd_event_xfer_complete(rhport, ep_addr, 0, XFER_RESULT_SUCCESS, true); } -static bool process_pipe0_xfer(rusb2_reg_t* rusb, int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) -{ +static bool process_pipe0_xfer(rusb2_reg_t *rusb, int buffer_type, uint8_t ep_addr, void *buffer, + uint16_t total_bytes) { + uint16_t fifo_sel = FIFOSEL_BIGEND; + if (rusb2_is_highspeed_reg(rusb)) { + fifo_sel |= RUSB2_FIFOSEL_MBW_32BIT; + } else { + fifo_sel |= RUSB2_FIFOSEL_MBW_16BIT; + } + /* configure fifo direction and access unit settings */ if (ep_addr != 0) { - /* IN, 2 bytes */ - rusb->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | - (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); - while ( !(rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) ) {} + /* IN, 2 bytes */ rusb->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | fifo_sel; + while (!(rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE)) {} } else { /* OUT, 2 bytes */ - rusb->CFIFOSEL = RUSB2_FIFOSEL_MBW_16BIT; // RUSB2_FIFOSEL_MBW_8BIT; - while ( rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE ) {} + rusb->CFIFOSEL = fifo_sel; + while (rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) {} } pipe_state_t *pipe = &_dcd.pipe[0]; - pipe->ff = buffer_type; - pipe->length = total_bytes; - pipe->remaining = total_bytes; + pipe->ff = buffer_type; + pipe->length = total_bytes; + pipe->remaining = total_bytes; - if ( total_bytes ) { + if (total_bytes) { pipe->buf = buffer; - if ( ep_addr ) { + if (ep_addr) { /* IN */ TU_ASSERT(rusb->DCPCTR_b.BSTS && (rusb->USBREQ & 0x80)); pipe0_xfer_in(rusb); @@ -631,18 +735,20 @@ static void process_set_address(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); const uint16_t addr = rusb->USBADDR_b.USBADDR; - if (!addr) return; + if (!addr) { + return; + } const tusb_control_request_t setup_packet = { #if defined(__CCRX__) .bmRequestType = { 0 }, /* Note: CCRX needs the braces over this struct member */ -#else - .bmRequestType = 0, -#endif - .bRequest = TUSB_REQ_SET_ADDRESS, - .wValue = addr, - .wIndex = 0, - .wLength = 0, + #else + .bmRequestType = 0, + #endif + .bRequest = TUSB_REQ_SET_ADDRESS, + .wValue = addr, + .wIndex = 0, + .wLength = 0, }; dcd_event_setup_received(rhport, (const uint8_t *) &setup_packet, true); diff --git a/src/tusb_option.h b/src/tusb_option.h index 8e147707a..0abae6116 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -375,10 +375,11 @@ //------------ RUSB2 --------------// #if defined(TUP_USBIP_RUSB2) - #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE_ODD_BYTE_SUPPORT // support odd byte access - #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 + #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (2 + (TUD_OPT_HIGH_SPEED ? 4 : 0)) // 16 bit and 32 bit data if highspeed + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 + #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE // custom write since rusb2 can change access width 32 -> 16 and can write + // odd byte with byte access #endif //-------------------------------------------------------------------- diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 6afcb2186..047d0879c 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -103,8 +103,9 @@ "name": "ra4m1_ek", "uid": "152E163038303131393346E46F26574B", "tests": { - "device": true, "host": false, "dual": false, - "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] + "device": true, + "host": false, + "dual": false }, "comment": "MSC is slow to enumerated #2602", "flasher": { -- cgit v1.3.1 From ea23966aa785a630012097943c70d8121c5139c1 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 3 Jan 2026 15:37:22 +0700 Subject: add default access mode for tu_hwfifo API make it easier for non-custom read/write --- src/common/tusb_fifo.c | 4 ++-- src/common/tusb_fifo.h | 8 ++++++-- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 13 +++++-------- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 6 +++--- src/portable/synopsys/dwc2/dcd_dwc2.c | 10 ++++------ 5 files changed, 20 insertions(+), 21 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index f6963a98d..362439fb8 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -138,7 +138,7 @@ static void stride_write(volatile void *hwfifo, const void *src, uint8_t data_st // Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode) { // Write full available 16/32 bit words to dest - const uint8_t data_stride = access_mode->data_stride; + const uint8_t data_stride = (access_mode != NULL) ? access_mode->data_stride : CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE; while (len >= data_stride) { stride_write(hwfifo, src, data_stride); src += data_stride; @@ -172,7 +172,7 @@ static void stride_read(const volatile void *hwfifo, void *dest, uint8_t data_st void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, const tu_hwfifo_access_t *access_mode) { // Reading full available 16/32-bit hwfifo and write to fifo - const uint8_t data_stride = access_mode->data_stride; + const uint8_t data_stride = (access_mode != NULL) ? access_mode->data_stride : CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE; while (len >= data_stride) { stride_read(hwfifo, dest, data_stride); dest += data_stride; diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 6fcc7020c..6c653c729 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -233,12 +233,16 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(volatile void *hwfifo, tu_fifo_t *f, uint16_t n, const tu_hwfifo_access_t *access_mode) { - return tu_fifo_read_n_access_mode(f, (void *)(uintptr_t)hwfifo, n, access_mode); + const tu_hwfifo_access_t default_access = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; + return tu_fifo_read_n_access_mode(f, (void *)(uintptr_t)hwfifo, n, + (access_mode != NULL) ? access_mode : &default_access); } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_read_to_fifo(const volatile void *hwfifo, tu_fifo_t *f, uint16_t n, const tu_hwfifo_access_t *access_mode) { - return tu_fifo_write_n_access_mode(f, (const void *)(uintptr_t)hwfifo, n, access_mode); + const tu_hwfifo_access_t default_access = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; + return tu_fifo_write_n_access_mode(f, (const void *)(uintptr_t)hwfifo, n, + (access_mode != NULL) ? access_mode : &default_access); } #if CFG_TUSB_FIFO_HWFIFO_API diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 2832611ff..72527a9ec 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -285,8 +285,7 @@ static void handle_ctr_setup(uint32_t ep_id) { uint16_t rx_addr = btable_get_addr(ep_id, BTABLE_BUF_RX); uint8_t setup_packet[8] TU_ATTR_ALIGNED(4); - const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; - tu_hwfifo_read(PMA_BUF_AT(rx_addr), setup_packet, rx_count, &access_mode); + tu_hwfifo_read(PMA_BUF_AT(rx_addr), setup_packet, rx_count, NULL); // Clear CTR RX if another setup packet arrived before this, it will be discarded ep_write_clear_ctr(ep_id, TUSB_DIR_OUT); @@ -324,11 +323,10 @@ static void handle_ctr_rx(uint32_t ep_id) { uint16_t pma_addr = (uint16_t) btable_get_addr(ep_id, buf_id); fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(pma_addr); - const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; if (xfer->ff) { - tu_hwfifo_read_to_fifo(pma_buf, xfer->ff, rx_count, &access_mode); + tu_hwfifo_read_to_fifo(pma_buf, xfer->ff, rx_count, NULL); } else { - tu_hwfifo_read(pma_buf, xfer->buffer + xfer->queued_len, rx_count, &access_mode); + tu_hwfifo_read(pma_buf, xfer->buffer + xfer->queued_len, rx_count, NULL); } xfer->queued_len += rx_count; @@ -723,11 +721,10 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { uint16_t addr_ptr = (uint16_t)btable_get_addr(ep_ix, buf_id); fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(addr_ptr); - const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; if (xfer->ff) { - tu_hwfifo_write_from_fifo(pma_buf, xfer->ff, len, &access_mode); + tu_hwfifo_write_from_fifo(pma_buf, xfer->ff, len, NULL); } else { - tu_hwfifo_write(pma_buf, &(xfer->buffer[xfer->queued_len]), len, &access_mode); + tu_hwfifo_write(pma_buf, &(xfer->buffer[xfer->queued_len]), len, NULL); } xfer->queued_len += len; diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index 480e460cb..f232f7d94 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -316,7 +316,7 @@ static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { // More data to send uint16_t const len = tu_min16(edpt->buflen - edpt->queued_len, edpt->max_packet_size); uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_TX); - tu_hwfifo_write(PMA_BUF_AT(pma_addr), &(edpt->buffer[edpt->queued_len]), len); + tu_hwfifo_write(PMA_BUF_AT(pma_addr), &(edpt->buffer[edpt->queued_len]), len, NULL); btable_set_count(ch_id, BTABLE_BUF_TX, len); edpt->queued_len += len; channel_write_status(ch_id, ch_reg, TUSB_DIR_OUT, EP_STAT_VALID, false); @@ -331,7 +331,7 @@ static void ch_handle_ack(uint8_t ch_id, uint32_t ch_reg, tusb_dir_t dir) { // IN/RX direction uint16_t const rx_count = channel_get_rx_count(ch_id); uint16_t pma_addr = (uint16_t) btable_get_addr(ch_id, BTABLE_BUF_RX); - tu_hwfifo_read(PMA_BUF_AT(pma_addr), edpt->buffer + edpt->queued_len, rx_count); + tu_hwfifo_read(PMA_BUF_AT(pma_addr), edpt->buffer + edpt->queued_len, rx_count, NULL); edpt->queued_len += rx_count; if ((rx_count < edpt->max_packet_size) || (edpt->queued_len >= edpt->buflen)) { @@ -842,7 +842,7 @@ static bool channel_xfer_start(uint8_t ch_id, tusb_dir_t dir) { if (dir == TUSB_DIR_OUT) { uint16_t const len = tu_min16(edpt->buflen - edpt->queued_len, edpt->max_packet_size); - tu_hwfifo_write(PMA_BUF_AT(pma_addr), &(edpt->buffer[edpt->queued_len]), len); + tu_hwfifo_write(PMA_BUF_AT(pma_addr), &(edpt->buffer[edpt->queued_len]), len, NULL); btable_set_count(ch_id, BTABLE_BUF_TX, len); edpt->queued_len += len; diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 2309afd53..4110e1530 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -365,13 +365,12 @@ static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum) { } // Push packet to Tx-FIFO - const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; volatile uint32_t *tx_fifo = dwc2->fifo[epnum]; if (xfer->ff) { - tu_hwfifo_write_from_fifo(tx_fifo, xfer->ff, xact_bytes, &access_mode); + tu_hwfifo_write_from_fifo(tx_fifo, xfer->ff, xact_bytes, NULL); total_bytes_written += xact_bytes; } else { - tu_hwfifo_write(tx_fifo, xfer->buffer, xact_bytes, &access_mode); + tu_hwfifo_write(tx_fifo, xfer->buffer, xact_bytes, NULL); xfer->buffer += xact_bytes; total_bytes_written += xact_bytes; } @@ -889,11 +888,10 @@ static void handle_rxflvl_irq(uint8_t rhport) { if (byte_count != 0) { // Read packet off RxFIFO - const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; if (xfer->ff != NULL) { - tu_hwfifo_read_to_fifo(rx_fifo, xfer->ff, byte_count, &access_mode); + tu_hwfifo_read_to_fifo(rx_fifo, xfer->ff, byte_count, NULL); } else { - tu_hwfifo_read(rx_fifo, xfer->buffer, byte_count, &access_mode); + tu_hwfifo_read(rx_fifo, xfer->buffer, byte_count, NULL); xfer->buffer += byte_count; } } -- cgit v1.3.1 From 93a1e8093a8abaac799e2aa45ec7dd1239a92196 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 3 Jan 2026 16:37:17 +0700 Subject: rusb2 move tu_hwfifo_write() to rusb2_common.c --- src/portable/renesas/rusb2/dcd_rusb2.c | 105 ++++++++---------------------- src/portable/renesas/rusb2/rusb2_common.c | 63 +++++++++++++++++- 2 files changed, 89 insertions(+), 79 deletions(-) diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index f8fc7a643..6722e7a75 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -281,71 +281,12 @@ static void pipe_read_packet_ff(rusb2_reg_t *rusb, tu_fifo_t *f, volatile void * } #endif -static void hwfifo_set_mbw(rusb2_reg_t *rusb, uintptr_t hwfifo, uint16_t mbw) { - volatile uint16_t *fifo_sel; - if (hwfifo == (uintptr_t)&rusb->CFIFO) { - fifo_sel = &rusb->CFIFOSEL; - } else if (hwfifo == (uintptr_t)&rusb->D0FIFO) { - fifo_sel = &rusb->D0FIFOSEL; - } else if (hwfifo == (uintptr_t)&rusb->D1FIFO) { - fifo_sel = &rusb->D1FIFOSEL; - } else { - return; - } - - *fifo_sel = (*fifo_sel & ~RUSB2_CFIFOSEL_MBW_Msk) | mbw; -} - -// write to hwfifo from buffer with access mode -void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode) { - rusb2_reg_t *rusb = (rusb2_reg_t *)access_mode->param; - const uint8_t *buf8 = (const uint8_t *)src; - - volatile uint16_t *ff16; - volatile uint8_t *ff8; - const bool is_highspeed = rusb2_is_highspeed_reg(rusb); - if (is_highspeed) { - ff16 = (volatile uint16_t *)((uintptr_t)hwfifo + 2); - ff8 = (volatile uint8_t *)((uintptr_t)hwfifo + 3); - } else { - ff16 = (volatile uint16_t *)hwfifo; - ff8 = ((volatile uint8_t *)hwfifo); - } - - // 32-bit access for highspeed - if (is_highspeed) { - volatile uint32_t *ff32 = (volatile uint32_t *)hwfifo; - while (len >= 4) { - *ff32 = tu_unaligned_read32(buf8); - buf8 += 4; - len -= 4; - } - - if (len >= 2) { - // switch to 16-bit access - hwfifo_set_mbw(rusb, (uintptr_t)hwfifo, RUSB2_FIFOSEL_MBW_16BIT); - } - } - - // 16-bit access - while (len >= 2) { - *ff16 = tu_unaligned_read16(buf8); - buf8 += 2; - len -= 2; - } - // 8-bit access does not need to change MBW - if (len > 0) { - *ff8 = *buf8; - ++buf8; - } -} //--------------------------------------------------------------------+ // Pipe Transfer //--------------------------------------------------------------------+ - -static bool pipe0_xfer_in(rusb2_reg_t *rusb) { +static bool pipe0_xact_in(rusb2_reg_t *rusb) { pipe_state_t *pipe = &_dcd.pipe[0]; const unsigned rem = pipe->remaining; @@ -359,8 +300,20 @@ static bool pipe0_xfer_in(rusb2_reg_t *rusb) { void *buf = pipe->buf; if (len) { - tu_hwfifo_access_t access_mode = {.data_stride = (rusb2_is_highspeed_reg(rusb) ? 4u : 2u), - .param = (uintptr_t)rusb}; + // uint16_t fifo_sel = RUSB2_CFIFOSEL_ISEL_WRITE | FIFOSEL_BIGEND; + tu_hwfifo_access_t access_mode; + access_mode.param = (uintptr_t)rusb; + // + if (rusb2_is_highspeed_reg(rusb)) { + // fifo_sel |= RUSB2_FIFOSEL_MBW_32BIT; + access_mode.data_stride = 4u; + } else { + // fifo_sel |= RUSB2_FIFOSEL_MBW_16BIT; + access_mode.data_stride = 2u; + } + // rusb->CFIFOSEL = fifo_sel; + // while (0 == (rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE)) {} + if (pipe->ff) { tu_hwfifo_write_from_fifo(&rusb->CFIFO, (tu_fifo_t *)buf, len, &access_mode); } else { @@ -377,7 +330,7 @@ static bool pipe0_xfer_in(rusb2_reg_t *rusb) { return false; } -static bool pipe0_xfer_out(rusb2_reg_t *rusb) { +static bool pipe0_xact_out(rusb2_reg_t *rusb) { pipe_state_t *pipe = &_dcd.pipe[0]; const unsigned rem = pipe->remaining; @@ -539,21 +492,17 @@ static void process_status_completion(uint8_t rhport) static bool process_pipe0_xfer(rusb2_reg_t *rusb, int buffer_type, uint8_t ep_addr, void *buffer, uint16_t total_bytes) { - uint16_t fifo_sel = FIFOSEL_BIGEND; - if (rusb2_is_highspeed_reg(rusb)) { - fifo_sel |= RUSB2_FIFOSEL_MBW_32BIT; - } else { - fifo_sel |= RUSB2_FIFOSEL_MBW_16BIT; - } + uint16_t fifo_sel = + (rusb2_is_highspeed_reg(rusb) ? RUSB2_FIFOSEL_MBW_32BIT : RUSB2_FIFOSEL_MBW_16BIT) | FIFOSEL_BIGEND; /* configure fifo direction and access unit settings */ if (ep_addr != 0) { - /* IN, 2 bytes */ rusb->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | fifo_sel; - while (!(rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE)) {} - } else { - /* OUT, 2 bytes */ - rusb->CFIFOSEL = fifo_sel; - while (rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) {} + // Control IN + fifo_sel |= RUSB2_CFIFOSEL_ISEL_WRITE; + } + rusb->CFIFOSEL = fifo_sel; + while ((rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) != (fifo_sel & RUSB2_CFIFOSEL_ISEL_WRITE)) { + // wait until ISEL_WRITE take effect } pipe_state_t *pipe = &_dcd.pipe[0]; @@ -566,7 +515,7 @@ static bool process_pipe0_xfer(rusb2_reg_t *rusb, int buffer_type, uint8_t ep_ad if (ep_addr) { /* IN */ TU_ASSERT(rusb->DCPCTR_b.BSTS && (rusb->USBREQ & 0x80)); - pipe0_xfer_in(rusb); + pipe0_xact_in(rusb); } rusb->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; } else { @@ -639,7 +588,7 @@ static bool process_edpt_xfer(rusb2_reg_t* rusb, int buffer_type, uint8_t ep_add static void process_pipe0_bemp(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - bool completed = pipe0_xfer_in(rusb); + bool completed = pipe0_xact_in(rusb); if (completed) { pipe_state_t *pipe = &_dcd.pipe[0]; dcd_event_xfer_complete(rhport, tu_edpt_addr(0, TUSB_DIR_IN), @@ -662,7 +611,7 @@ static void process_pipe_brdy(uint8_t rhport, unsigned num) if (num) { completed = pipe_xfer_out(rusb, num); } else { - completed = pipe0_xfer_out(rusb); + completed = pipe0_xact_out(rusb); } } if (completed) { diff --git a/src/portable/renesas/rusb2/rusb2_common.c b/src/portable/renesas/rusb2/rusb2_common.c index 856f9714f..3ed6f2be1 100644 --- a/src/portable/renesas/rusb2/rusb2_common.c +++ b/src/portable/renesas/rusb2/rusb2_common.c @@ -25,9 +25,10 @@ */ #include "tusb_option.h" +#include "osal/osal.h" +#include "common/tusb_fifo.h" #if defined(TUP_USBIP_RUSB2) && (CFG_TUH_ENABLED || CFG_TUD_ENABLED) - #include "rusb2_type.h" #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) @@ -55,4 +56,64 @@ void tusb_rusb2_set_irqnum(uint8_t rhport, int32_t irqnum) { #endif +static void hwfifo_set_mbw(rusb2_reg_t *rusb, uintptr_t hwfifo, uint16_t mbw) { + volatile uint16_t *fifo_sel; + if (hwfifo == (uintptr_t)&rusb->CFIFO) { + fifo_sel = &rusb->CFIFOSEL; + } else if (hwfifo == (uintptr_t)&rusb->D0FIFO) { + fifo_sel = &rusb->D0FIFOSEL; + } else if (hwfifo == (uintptr_t)&rusb->D1FIFO) { + fifo_sel = &rusb->D1FIFOSEL; + } else { + return; + } + + *fifo_sel = (*fifo_sel & ~RUSB2_CFIFOSEL_MBW_Msk) | mbw; +} + +// write to hwfifo from buffer with access mode +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode) { + rusb2_reg_t *rusb = (rusb2_reg_t *)access_mode->param; + const uint8_t *buf8 = (const uint8_t *)src; + + volatile uint16_t *ff16; + volatile uint8_t *ff8; + const bool is_highspeed = rusb2_is_highspeed_reg(rusb); + if (is_highspeed) { + ff16 = (volatile uint16_t *)((uintptr_t)hwfifo + 2); + ff8 = (volatile uint8_t *)((uintptr_t)hwfifo + 3); + } else { + ff16 = (volatile uint16_t *)hwfifo; + ff8 = ((volatile uint8_t *)hwfifo); + } + + // 32-bit access for highspeed + if (is_highspeed) { + volatile uint32_t *ff32 = (volatile uint32_t *)hwfifo; + while (len >= 4) { + *ff32 = tu_unaligned_read32(buf8); + buf8 += 4; + len -= 4; + } + + if (len >= 2) { + // switch to 16-bit access + hwfifo_set_mbw(rusb, (uintptr_t)hwfifo, RUSB2_FIFOSEL_MBW_16BIT); + } + } + + // 16-bit access + while (len >= 2) { + *ff16 = tu_unaligned_read16(buf8); + buf8 += 2; + len -= 2; + } + + // 8-bit access does not need to change MBW + if (len > 0) { + *ff8 = *buf8; + ++buf8; + } +} + #endif -- cgit v1.3.1 From d457ea3d3ca6727099211528bc0c415ed12eadff Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 3 Jan 2026 17:52:58 +0700 Subject: fix build with dwc2 --- src/common/tusb_fifo.h | 2 +- src/common/tusb_mcu.h | 8 ---- src/portable/synopsys/dwc2/dcd_dwc2.c | 85 +++++++++++++++++++---------------- src/tusb_option.h | 39 +++++++--------- 4 files changed, 65 insertions(+), 69 deletions(-) diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 6c653c729..967e6702c 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -41,7 +41,7 @@ extern "C" { // mutex is only needed for RTOS. For OS None, we don't get preempted #define CFG_FIFO_MUTEX OSAL_MUTEX_REQUIRED -#define CFG_TUSB_FIFO_HWFIFO_API (CFG_TUD_EDPT_DEDICATED_HWFIFO) +#define CFG_TUSB_FIFO_HWFIFO_API (CFG_TUD_EDPT_DEDICATED_HWFIFO || CFG_TUH_EDPT_DEDICATED_HWFIFO) #ifndef CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 0 diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index f525a5a3d..8dd4078c4 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -429,10 +429,6 @@ #define TUP_MCU_MULTIPLE_CORE 1 #endif - // Disable slave if DMA is enabled - #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE - #elif TU_CHECK_MCU(OPT_MCU_ESP32P4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_ESP32 @@ -445,10 +441,6 @@ #define TUP_MCU_MULTIPLE_CORE 1 - // Disable slave if DMA is enabled - #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE - // Enable dcache if DMA is enabled #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 4110e1530..44f7137f9 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -98,10 +98,14 @@ TU_ATTR_ALWAYS_INLINE static inline bool edpt_is_enabled(dwc2_dep_t* dep) { return (dep->ctl & EPCTL_EPENA) != 0; } -//-------------------------------------------------------------------- -// DMA -//-------------------------------------------------------------------- -#if CFG_TUD_MEM_DCACHE_ENABLE + #if CFG_TUD_DWC2_SLAVE_ENABLE +static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum); + #endif + + //-------------------------------------------------------------------- + // DMA + //-------------------------------------------------------------------- + #if CFG_TUD_MEM_DCACHE_ENABLE bool dcd_dcache_clean(const void* addr, uint32_t data_size) { TU_VERIFY(addr && data_size); return dwc2_dcache_clean(addr, data_size); @@ -345,39 +349,6 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { } } -static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum) { - dwc2_dep_t *const epin = &dwc2->ep[0][epnum]; - xfer_ctl_t *const xfer = XFER_CTL_BASE(epnum, TUSB_DIR_IN); - - dwc2_ep_tsize_t tsiz = {.value = epin->tsiz}; - const uint16_t remain_packets = tsiz.packet_count; - - uint16_t total_bytes_written = 0; - // Process every single packet (only whole packets can be written to fifo) - for (uint16_t i = 0; i < remain_packets; i++) { - tsiz.value = epin->tsiz; - const uint16_t remain_bytes = (uint16_t) tsiz.xfer_size; - const uint16_t xact_bytes = tu_min16(remain_bytes, xfer->max_size); - - // Check if dtxfsts has enough space available - if (xact_bytes > ((epin->dtxfsts & DTXFSTS_INEPTFSAV_Msk) << 2)) { - break; - } - - // Push packet to Tx-FIFO - volatile uint32_t *tx_fifo = dwc2->fifo[epnum]; - if (xfer->ff) { - tu_hwfifo_write_from_fifo(tx_fifo, xfer->ff, xact_bytes, NULL); - total_bytes_written += xact_bytes; - } else { - tu_hwfifo_write(tx_fifo, xfer->buffer, xact_bytes, NULL); - xfer->buffer += xact_bytes; - total_bytes_written += xact_bytes; - } - } - return total_bytes_written; -} - // Since this function returns void, it is not possible to return a boolean success message // We must make sure that this function is not called when the EP is disabled // Must be called from critical section @@ -422,6 +393,7 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin } } + #if CFG_TUD_DWC2_DMA_ENABLE const bool is_dma = dma_device_enabled(dwc2); if(is_dma) { if (dir == TUSB_DIR_IN && total_bytes != 0) { @@ -433,7 +405,10 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin if (epnum == 0) { xfer->buffer += total_bytes; } - } else { + } else + #endif + { + #if CFG_TUD_DWC2_SLAVE_ENABLE dep->diepctl = depctl.value; // enable endpoint if (dir == TUSB_DIR_IN && total_bytes != 0) { @@ -445,6 +420,7 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin dwc2->diepempmsk |= (1u << epnum); } } + #endif } } @@ -850,6 +826,39 @@ TU_ATTR_ALWAYS_INLINE static inline void print_doepint(uint32_t doepint) { #endif #if CFG_TUD_DWC2_SLAVE_ENABLE +static uint16_t epin_write_tx_fifo(dwc2_regs_t *dwc2, uint8_t epnum) { + dwc2_dep_t *const epin = &dwc2->ep[0][epnum]; + xfer_ctl_t *const xfer = XFER_CTL_BASE(epnum, TUSB_DIR_IN); + + dwc2_ep_tsize_t tsiz = {.value = epin->tsiz}; + const uint16_t remain_packets = tsiz.packet_count; + + uint16_t total_bytes_written = 0; + // Process every single packet (only whole packets can be written to fifo) + for (uint16_t i = 0; i < remain_packets; i++) { + tsiz.value = epin->tsiz; + const uint16_t remain_bytes = (uint16_t)tsiz.xfer_size; + const uint16_t xact_bytes = tu_min16(remain_bytes, xfer->max_size); + + // Check if dtxfsts has enough space available + if (xact_bytes > ((epin->dtxfsts & DTXFSTS_INEPTFSAV_Msk) << 2)) { + break; + } + + // Push packet to Tx-FIFO + volatile uint32_t *tx_fifo = dwc2->fifo[epnum]; + if (xfer->ff) { + tu_hwfifo_write_from_fifo(tx_fifo, xfer->ff, xact_bytes, NULL); + total_bytes_written += xact_bytes; + } else { + tu_hwfifo_write(tx_fifo, xfer->buffer, xact_bytes, NULL); + xfer->buffer += xact_bytes; + total_bytes_written += xact_bytes; + } + } + return total_bytes_written; +} + // Process shared receive FIFO, this interrupt is only used in Slave mode static void handle_rxflvl_irq(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); diff --git a/src/tusb_option.h b/src/tusb_option.h index 0abae6116..453dddb7c 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -268,16 +268,7 @@ //--------------------------------------------------------------------+ //------------- DWC2 -------------// -// Slave mode for device -#ifndef CFG_TUD_DWC2_SLAVE_ENABLE - #ifndef CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT - #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT 1 - #endif - - #define CFG_TUD_DWC2_SLAVE_ENABLE CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT -#endif - -// DMA for device +// DMA mode for device #ifndef CFG_TUD_DWC2_DMA_ENABLE #ifndef CFG_TUD_DWC2_DMA_ENABLE_DEFAULT #define CFG_TUD_DWC2_DMA_ENABLE_DEFAULT 0 @@ -286,16 +277,16 @@ #define CFG_TUD_DWC2_DMA_ENABLE CFG_TUD_DWC2_DMA_ENABLE_DEFAULT #endif -// Slave mode for host -#ifndef CFG_TUH_DWC2_SLAVE_ENABLE - #ifndef CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT - #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT 1 +// Slave mode for device +#ifndef CFG_TUD_DWC2_SLAVE_ENABLE + #ifndef CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT + #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE // disabled if DMA is enabled #endif - #define CFG_TUH_DWC2_SLAVE_ENABLE CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT + #define CFG_TUD_DWC2_SLAVE_ENABLE CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT #endif -// DMA for host +// DMA mode for host #ifndef CFG_TUH_DWC2_DMA_ENABLE #ifndef CFG_TUH_DWC2_DMA_ENABLE_DEFAULT #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 @@ -304,14 +295,18 @@ #define CFG_TUH_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE_DEFAULT #endif -#if defined(TUP_USBIP_DWC2) - #if CFG_TUD_DWC2_SLAVE_ENABLE && !CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 +// Slave mode for host +#ifndef CFG_TUH_DWC2_SLAVE_ENABLE + #ifndef CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT + #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE // disabled if DMA is enabled #endif - #if CFG_TUH_DWC2_SLAVE_ENABLE && !CFG_TUH_DWC2_DMA_ENABLE - #define CFG_TUH_EDPT_DEDICATED_HWFIFO 1 - #endif + #define CFG_TUH_DWC2_SLAVE_ENABLE CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT +#endif + +#if defined(TUP_USBIP_DWC2) + #define CFG_TUD_EDPT_DEDICATED_HWFIFO CFG_TUD_DWC2_SLAVE_ENABLE + #define CFG_TUH_EDPT_DEDICATED_HWFIFO CFG_TUH_DWC2_SLAVE_ENABLE #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32bit access #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 // fixed hwfifo address -- cgit v1.3.1 From b93d463afa11a7a24bc43dc7969a287c1d056b27 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 3 Jan 2026 23:54:05 +0700 Subject: fix rusb2 hcd_port_connect_status() using line state, add post root reset delay for stable speed detection --- src/host/usbh.c | 14 ++++++----- src/portable/renesas/rusb2/hcd_rusb2.c | 43 +++++++++------------------------ src/portable/renesas/rusb2/rusb2_type.h | 13 +++++++--- 3 files changed, 28 insertions(+), 42 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index e99d9e977..a725b7c8b 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -1405,12 +1405,13 @@ static void remove_device_tree(uint8_t rhport, uint8_t hub_addr, uint8_t hub_por // NOTE: due to the shared control buffer, we must complete enumerating // one device before enumerating another one. //--------------------------------------------------------------------+ -enum { // USB 2.0 specs 7.1.7 for timing - ENUM_DEBOUNCING_DELAY_MS = 150, // T(ATTDB) minimum 100 ms for stable connection - ENUM_RESET_ROOT_DELAY_MS = 50, // T(DRSTr) minimum 50 ms for reset from root port - ENUM_RESET_HUB_DELAY_MS = 20, // T(DRST) 10-20 ms for hub reset - ENUM_RESET_RECOVERY_DELAY_MS = 10, // T(RSTRCY) minimum 10 ms for reset recovery - ENUM_SET_ADDRESS_RECOVERY_DELAY_MS = 2, // USB 2.0 Spec 9.2.6.3 min is 2 ms +enum { // USB 2.0 specs 7.1.7 for timing + ENUM_DEBOUNCING_DELAY_MS = 150, // T(ATTDB) minimum 100 ms for stable connection + ENUM_RESET_ROOT_DELAY_MS = 50, // T(DRSTr) minimum 50 ms for reset from root port + ENUM_RESET_ROOT_POST_DELAY_MS = 2, // 2 ms delay after root port reset before getting speed/status + ENUM_RESET_HUB_DELAY_MS = 20, // T(DRST) 10-20 ms for hub reset + ENUM_RESET_RECOVERY_DELAY_MS = 10, // T(RSTRCY) minimum 10 ms for reset recovery + ENUM_SET_ADDRESS_RECOVERY_DELAY_MS = 2, // USB 2.0 Spec 9.2.6.3 min is 2 ms }; enum { @@ -1469,6 +1470,7 @@ static bool enum_new_device(hcd_event_t* event) { hcd_port_reset(dev0_bus->rhport); tusb_time_delay_ms_api(ENUM_RESET_ROOT_DELAY_MS); hcd_port_reset_end(dev0_bus->rhport); + tusb_time_delay_ms_api(ENUM_RESET_ROOT_POST_DELAY_MS); if (!hcd_port_connect_status(dev0_bus->rhport)) { // device unplugged while delaying diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 6f6d27d0e..d70599f5b 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -76,12 +76,10 @@ typedef struct TU_ATTR_PACKED { TU_ATTR_PACKED_END // End of definition of packed structs (used by the CCRX toolchain) TU_ATTR_BIT_FIELD_ORDER_END -typedef struct -{ - bool need_reset; /* The device has not been reset after connection. */ +typedef struct { pipe_state_t pipe[PIPE_COUNT]; - uint8_t ep[4][2][15]; /* a lookup table for a pipe index from an endpoint address */ - uint8_t ctl_mps[5]; /* EP0 max packet size for each device */ + uint8_t ep[4][2][15]; /* a lookup table for a pipe index from an endpoint address */ + uint8_t ctl_mps[5]; /* EP0 max packet size for each device */ } hcd_data_t; //--------------------------------------------------------------------+ @@ -535,13 +533,8 @@ void hcd_int_disable(uint8_t rhport) { rusb2_int_disable(rhport); } -uint32_t hcd_frame_number(uint8_t rhport) -{ - rusb2_reg_t* rusb = RUSB2_REG(rhport); - - /* The device must be reset at least once after connection - * in order to start the frame counter. */ - if (_hcd.need_reset) hcd_port_reset(rhport); +uint32_t hcd_frame_number(uint8_t rhport) { + rusb2_reg_t *rusb = RUSB2_REG(rhport); return rusb->FRMNUM_b.FRNM; } @@ -550,32 +543,18 @@ uint32_t hcd_frame_number(uint8_t rhport) *--------------------------------------------------------------------+*/ bool hcd_port_connect_status(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - return rusb->INTSTS1_b.ATTCH ? true : false; + const uint16_t line_state = rusb->SYSSTS0 & RUSB2_SYSSTS0_LNST_Msk; + return line_state == RUSB2_SYSSTS0_LNST_FS_J || line_state == RUSB2_SYSSTS0_LNST_FS_K; } void hcd_port_reset(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - rusb->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; - while (rusb->DCPCTR_b.PBUSY) {} - - hcd_int_disable(rhport); - rusb->DVSTCTR0_b.UACT = 0; - if (rusb->DCPCTR_b.SUREQ) { - rusb->DCPCTR_b.SUREQCLR = 1; - } - hcd_int_enable(rhport); - - /* Reset should be asserted 10-20ms. */ rusb->DVSTCTR0_b.USBRST = 1; - for (volatile int i = 0; i < 2400000; ++i) {} - rusb->DVSTCTR0_b.USBRST = 0; - - rusb->DVSTCTR0_b.UACT = 1; - _hcd.need_reset = false; } void hcd_port_reset_end(uint8_t rhport) { - (void) rhport; + rusb2_reg_t *rusb = RUSB2_REG(rhport); + rusb->DVSTCTR0_b.USBRST = 0; } tusb_speed_t hcd_port_speed_get(uint8_t rhport) { @@ -584,7 +563,8 @@ tusb_speed_t hcd_port_speed_get(uint8_t rhport) { case RUSB2_DVSTCTR0_RHST_HS: return TUSB_SPEED_HIGH; case RUSB2_DVSTCTR0_RHST_FS: return TUSB_SPEED_FULL; case RUSB2_DVSTCTR0_RHST_LS: return TUSB_SPEED_LOW; - default: return TUSB_SPEED_INVALID; + default: + return TUSB_SPEED_INVALID; } } @@ -802,7 +782,6 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { if (is1 & RUSB2_INTSTS1_ATTCH_Msk) { rusb->DVSTCTR0_b.UACT = 1; - _hcd.need_reset = true; rusb->INTENB1 = (rusb->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; hcd_event_device_attach(rhport, true); } diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index 71837d03c..cf685ea3c 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -1669,15 +1669,20 @@ TU_ATTR_BIT_FIELD_ORDER_END /*--------------------------------------------------------------------*/ /* Register Bit Utils */ /*--------------------------------------------------------------------*/ -#define RUSB2_PIPE_CTR_PID_NAK (0U << RUSB2_PIPE_CTR_PID_Pos) /* NAK response */ -#define RUSB2_PIPE_CTR_PID_BUF (1U << RUSB2_PIPE_CTR_PID_Pos) /* BUF response (depends buffer state) */ -#define RUSB2_PIPE_CTR_PID_STALL (2U << RUSB2_PIPE_CTR_PID_Pos) /* STALL response */ -#define RUSB2_PIPE_CTR_PID_STALL2 (3U << RUSB2_PIPE_CTR_PID_Pos) /* Also STALL response */ +#define RUSB2_SYSSTS0_LNST_SE0 (0) +#define RUSB2_SYSSTS0_LNST_FS_J (1u << RUSB2_SYSSTS0_LNST_Pos) /* Full-speed J state */ +#define RUSB2_SYSSTS0_LNST_FS_K (2u << RUSB2_SYSSTS0_LNST_Pos) /* Full-speed K state */ +#define RUSB2_SYSSTS0_LNST_LS_SE1 (3u << RUSB2_SYSSTS0_LNST_Pos) /* Low-speed SE1 state */ #define RUSB2_DVSTCTR0_RHST_LS (1U << RUSB2_DVSTCTR0_RHST_Pos) /* Low-speed connection */ #define RUSB2_DVSTCTR0_RHST_FS (2U << RUSB2_DVSTCTR0_RHST_Pos) /* Full-speed connection */ #define RUSB2_DVSTCTR0_RHST_HS (3U << RUSB2_DVSTCTR0_RHST_Pos) /* Full-speed connection */ +#define RUSB2_PIPE_CTR_PID_NAK (0U << RUSB2_PIPE_CTR_PID_Pos) /* NAK response */ +#define RUSB2_PIPE_CTR_PID_BUF (1U << RUSB2_PIPE_CTR_PID_Pos) /* BUF response (depends buffer state) */ +#define RUSB2_PIPE_CTR_PID_STALL (2U << RUSB2_PIPE_CTR_PID_Pos) /* STALL response */ +#define RUSB2_PIPE_CTR_PID_STALL2 (3U << RUSB2_PIPE_CTR_PID_Pos) /* Also STALL response */ + #define RUSB2_DEVADD_USBSPD_LS (1U << RUSB2_DEVADD_USBSPD_Pos) /* Target Device Low-speed */ #define RUSB2_DEVADD_USBSPD_FS (2U << RUSB2_DEVADD_USBSPD_Pos) /* Target Device Full-speed */ -- cgit v1.3.1 From a9479f5ad96c28747661d9392ac28698f84c7bac Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 4 Jan 2026 01:01:52 +0700 Subject: update hcd rusb2 to use tu_hwfifo read/write --- src/common/tusb_fifo.h | 4 +- src/portable/renesas/rusb2/dcd_rusb2.c | 153 ++---------------------------- src/portable/renesas/rusb2/hcd_rusb2.c | 92 +++++++++--------- src/portable/renesas/rusb2/rusb2_common.c | 25 +++-- src/portable/renesas/rusb2/rusb2_common.h | 58 +++++++++++ src/portable/renesas/rusb2/rusb2_type.h | 7 +- 6 files changed, 125 insertions(+), 214 deletions(-) create mode 100644 src/portable/renesas/rusb2/rusb2_common.h diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 967e6702c..5515ffb91 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -233,14 +233,14 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(volatile void *hwfifo, tu_fifo_t *f, uint16_t n, const tu_hwfifo_access_t *access_mode) { - const tu_hwfifo_access_t default_access = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; + const tu_hwfifo_access_t default_access = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE, .param = 0}; return tu_fifo_read_n_access_mode(f, (void *)(uintptr_t)hwfifo, n, (access_mode != NULL) ? access_mode : &default_access); } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_read_to_fifo(const volatile void *hwfifo, tu_fifo_t *f, uint16_t n, const tu_hwfifo_access_t *access_mode) { - const tu_hwfifo_access_t default_access = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; + const tu_hwfifo_access_t default_access = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE, .param = 0}; return tu_fifo_write_n_access_mode(f, (const void *)(uintptr_t)hwfifo, n, (access_mode != NULL) ? access_mode : &default_access); } diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 6722e7a75..e2a51a5ca 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -30,25 +30,7 @@ #if CFG_TUD_ENABLED && defined(TUP_USBIP_RUSB2) #include "device/dcd.h" -#include "rusb2_type.h" - -#if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) - #include "rusb2_rx.h" -#elif TU_CHECK_MCU(OPT_MCU_RAXXX) - #include "rusb2_ra.h" - #if defined(RENESAS_CORTEX_M23) - #define D0FIFO CFIFO - #define D0FIFOSEL CFIFOSEL - #define D0FIFOSEL_b CFIFOSEL_b - #define D1FIFOSEL CFIFOSEL - #define D1FIFOSEL_b CFIFOSEL_b - #define D0FIFOCTR CFIFOCTR - #define D0FIFOCTR_b CFIFOCTR_b - #endif - -#else - #error "Unsupported MCU" -#endif +#include "rusb2_common.h" //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM @@ -57,10 +39,6 @@ enum { PIPE_COUNT = 10, }; -enum { - FIFOSEL_BIGEND = (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0) -}; - typedef struct { void *buf; /* the start address of a transfer data buffer */ uint16_t length; /* the number of bytes in the buffer */ @@ -164,129 +142,10 @@ static inline void pipe_wait_for_ready(rusb2_reg_t * rusb, unsigned num) { while ( !rusb->D0FIFOCTR_b.FRDY ) {} } -//--------------------------------------------------------------------+ -// Pipe FIFO -//--------------------------------------------------------------------+ -#define USE_HWFIFO 1 - #if !USE_HWFIFO -// Write data buffer --> hw fifo -static void pipe_write_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo, unsigned len) -{ - (void) rusb; - - volatile uint16_t *ff16; - volatile uint8_t *ff8; - - const uint8_t *buf8 = (const uint8_t *)buf; - - // Highspeed FIFO is 32-bit - if ( rusb2_is_highspeed_reg(rusb) ) { - // TODO 32-bit access for better performance - volatile uint32_t *ff32 = (volatile uint32_t *)fifo; - ff16 = (volatile uint16_t*) ((uintptr_t) fifo+2); - ff8 = (volatile uint8_t *) ((uintptr_t) fifo+3); - - while (len >= 4) { - *ff32 = tu_unaligned_read32(buf8); - buf8 += 4; - len -= 4; - } - - if (len >= 2) { - // switch to 16-bit access - rusb->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | - (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); - *ff16 = tu_unaligned_read16(buf8); - buf8 += 2; - len -= 2; - } - - if (len > 0) { - *ff8 = *buf8; - ++buf8; - } - } else { - ff16 = (volatile uint16_t*) fifo; - ff8 = ((volatile uint8_t *)fifo); - - while (len >= 2) { - *ff16 = tu_unaligned_read16(buf8); - buf8 += 2; - len -= 2; - } - - if (len > 0) { - *ff8 = *buf8; - ++buf8; - } - } -} - -// Write data sw fifo --> hw fifo -static void pipe_write_packet_ff(rusb2_reg_t * rusb, tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { - tu_fifo_buffer_info_t info; - tu_fifo_get_read_info(f, &info); - - uint16_t cnt_lin = tu_min16(total_len, info.linear.len); - uint16_t cnt_wrap = tu_min16(total_len - cnt_lin, info.wrapped.len); - uint16_t const cnt_written = cnt_lin + cnt_wrap; - - // Ensure only the last write is odd if total_len is odd - if (cnt_wrap == 0) { - pipe_write_packet(rusb, info.linear.ptr, fifo, cnt_lin); - } else { - pipe_write_packet(rusb, info.linear.ptr, fifo, cnt_lin & ~1); - - if (cnt_lin & 1) { - uint8_t glue[2] = {info.linear.ptr[cnt_lin & ~1], info.wrapped.ptr[0]}; - pipe_write_packet(rusb, glue, fifo, 2); - cnt_wrap--; - info.wrapped.ptr++; - } - - pipe_write_packet(rusb, info.wrapped.ptr, fifo, cnt_wrap); - } - tu_fifo_advance_read_pointer(f, cnt_written); -} - -// Read data buffer <-- hw fifo -static void pipe_read_packet(rusb2_reg_t *rusb, void *buf, volatile void *fifo, unsigned len) { - (void)rusb; - - // TODO 16/32-bit access for better performance - - uint8_t *p = (uint8_t *)buf; - volatile uint8_t *reg = (volatile uint8_t *)fifo; /* byte access is always at base register address */ - while (len--) { - *p++ = *reg; - } -} - -// Read data sw fifo <-- hw fifo -static void pipe_read_packet_ff(rusb2_reg_t *rusb, tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { - tu_fifo_buffer_info_t info; - tu_fifo_get_write_info(f, &info); - - uint16_t count = tu_min16(total_len, info.linear.len); - pipe_read_packet(rusb, info.linear.ptr, fifo, count); - - uint16_t rem = total_len - count; - if (rem) { - rem = tu_min16(rem, info.wrapped.len); - pipe_read_packet(rusb, info.wrapped.ptr, fifo, rem); - count += rem; - } - - tu_fifo_advance_write_pointer(f, count); -} - #endif - - - //--------------------------------------------------------------------+ // Pipe Transfer //--------------------------------------------------------------------+ -static bool pipe0_xact_in(rusb2_reg_t *rusb) { +static bool pipe0_xfer_in(rusb2_reg_t *rusb) { pipe_state_t *pipe = &_dcd.pipe[0]; const unsigned rem = pipe->remaining; @@ -330,7 +189,7 @@ static bool pipe0_xact_in(rusb2_reg_t *rusb) { return false; } -static bool pipe0_xact_out(rusb2_reg_t *rusb) { +static bool pipe0_xfer_out(rusb2_reg_t *rusb) { pipe_state_t *pipe = &_dcd.pipe[0]; const unsigned rem = pipe->remaining; @@ -515,7 +374,7 @@ static bool process_pipe0_xfer(rusb2_reg_t *rusb, int buffer_type, uint8_t ep_ad if (ep_addr) { /* IN */ TU_ASSERT(rusb->DCPCTR_b.BSTS && (rusb->USBREQ & 0x80)); - pipe0_xact_in(rusb); + pipe0_xfer_in(rusb); } rusb->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; } else { @@ -588,7 +447,7 @@ static bool process_edpt_xfer(rusb2_reg_t* rusb, int buffer_type, uint8_t ep_add static void process_pipe0_bemp(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - bool completed = pipe0_xact_in(rusb); + bool completed = pipe0_xfer_in(rusb); if (completed) { pipe_state_t *pipe = &_dcd.pipe[0]; dcd_event_xfer_complete(rhport, tu_edpt_addr(0, TUSB_DIR_IN), @@ -611,7 +470,7 @@ static void process_pipe_brdy(uint8_t rhport, unsigned num) if (num) { completed = pipe_xfer_out(rusb, num); } else { - completed = pipe0_xact_out(rusb); + completed = pipe0_xfer_out(rusb); } } if (completed) { diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index d70599f5b..4c3315044 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -31,17 +31,9 @@ #include "host/hcd.h" #include "host/usbh.h" -#include "rusb2_type.h" +#include "rusb2_common.h" -#if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) - #include "rusb2_rx.h" -#elif TU_CHECK_MCU(OPT_MCU_RAXXX) - #include "rusb2_ra.h" -#else - #error "Unsupported MCU" -#endif - -#define TU_RUSB2_HCD_DBG 2 + #define TU_RUSB2_HCD_DBG 2 //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION @@ -164,29 +156,6 @@ static inline void pipe_wait_for_ready(rusb2_reg_t* rusb, unsigned num) while (!rusb->D0FIFOCTR_b.FRDY) {} } -static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) -{ - // NOTE: unlike DCD, Highspeed 32-bit FIFO does not need to adjust the fifo address - volatile hw_fifo_t *reg = (volatile hw_fifo_t*)fifo; - uintptr_t addr = (uintptr_t)buf; - while (len >= 2) { - reg->u16 = *(const uint16_t *)addr; - addr += 2; - len -= 2; - } - if (len) { - reg->u8 = *(const uint8_t *)addr; - ++addr; - } -} - -static void pipe_read_packet(void *buf, volatile void *fifo, unsigned len) -{ - uint8_t *p = (uint8_t*)buf; - volatile uint8_t *reg = (volatile uint8_t*)fifo; /* byte access is always at base register address */ - while (len--) *p++ = *reg; -} - static bool pipe0_xfer_in(rusb2_reg_t* rusb) { pipe_state_t *pipe = &_hcd.pipe[0]; @@ -197,8 +166,12 @@ static bool pipe0_xfer_in(rusb2_reg_t* rusb) const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); void *buf = pipe->buf; if (len) { + tu_hwfifo_access_t access_mode = {.data_stride = (rusb2_is_highspeed_reg(rusb) ? 4u : 2u), + .param = (uintptr_t)rusb}; + rusb->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; - pipe_read_packet(buf, (volatile void*)&rusb->CFIFO, len); + // pipe_read_packet(buf, (volatile void*)&rusb->CFIFO, len); + tu_hwfifo_read(&rusb->CFIFO, buf, len, &access_mode); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { @@ -225,7 +198,11 @@ static bool pipe0_xfer_out(rusb2_reg_t* rusb) const unsigned len = TU_MIN(mps, rem); void *buf = pipe->buf; if (len) { - pipe_write_packet(buf, (volatile void*)&rusb->CFIFO, len); + tu_hwfifo_access_t access_mode = {.data_stride = (rusb2_is_highspeed_reg(rusb) ? 4u : 2u), + .param = (uintptr_t)rusb}; + + // pipe_write_packet(buf, (volatile void*)&rusb->CFIFO, len); + tu_hwfifo_write(&rusb->CFIFO, buf, len, &access_mode); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { @@ -240,14 +217,24 @@ static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) pipe_state_t *pipe = &_hcd.pipe[num]; const unsigned rem = pipe->remaining; - rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_8BIT; + uint16_t fifo_sel = num | FIFOSEL_BIGEND; + if (rusb2_is_highspeed_reg(rusb)) { + fifo_sel |= RUSB2_FIFOSEL_MBW_32BIT; + } else { + fifo_sel |= RUSB2_FIFOSEL_MBW_16BIT; + } + rusb->D0FIFOSEL = fifo_sel; + const unsigned mps = edpt_max_packet_size(rusb, num); pipe_wait_for_ready(rusb, num); const unsigned vld = rusb->D0FIFOCTR_b.DTLN; const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); void *buf = pipe->buf; if (len) { - pipe_read_packet(buf, (volatile void*)&rusb->D0FIFO, len); + // pipe_read_packet(buf, (volatile void*)&rusb->D0FIFO, len); + tu_hwfifo_access_t access_mode = {.data_stride = (rusb2_is_highspeed_reg(rusb) ? 4u : 2u), + .param = (uintptr_t)rusb}; + tu_hwfifo_read(&rusb->D0FIFO, buf, len, &access_mode); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { @@ -273,13 +260,23 @@ static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) return true; } - rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); + uint16_t fifo_sel = num | FIFOSEL_BIGEND; + if (rusb2_is_highspeed_reg(rusb)) { + fifo_sel |= RUSB2_FIFOSEL_MBW_32BIT; + } else { + fifo_sel |= RUSB2_FIFOSEL_MBW_16BIT; + } + rusb->D0FIFOSEL = fifo_sel; + const unsigned mps = edpt_max_packet_size(rusb, num); pipe_wait_for_ready(rusb, num); const unsigned len = TU_MIN(rem, mps); void *buf = pipe->buf; if (len) { - pipe_write_packet(buf, (volatile void*)&rusb->D0FIFO, len); + // pipe_write_packet(buf, (volatile void*)&rusb->D0FIFO, len); + tu_hwfifo_access_t access_mode = {.data_stride = (rusb2_is_highspeed_reg(rusb) ? 4u : 2u), + .param = (uintptr_t)rusb}; + tu_hwfifo_write(&rusb->D0FIFO, buf, len, &access_mode); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { @@ -294,18 +291,19 @@ static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) static bool process_pipe0_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) { (void)dev_addr; - rusb2_reg_t* rusb = RUSB2_REG(rhport); const unsigned dir_in = tu_edpt_dir(ep_addr); + uint16_t fifo_sel = + (rusb2_is_highspeed_reg(rusb) ? RUSB2_FIFOSEL_MBW_32BIT : RUSB2_FIFOSEL_MBW_16BIT) | FIFOSEL_BIGEND; + /* configure fifo direction and access unit settings */ - if (dir_in) { /* IN, a byte */ - rusb->CFIFOSEL = RUSB2_FIFOSEL_MBW_8BIT; - while (rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) ; - } else { /* OUT, 2 bytes */ - rusb->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | - (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); - while (!(rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE)) ; + if (dir_in == TUSB_DIR_OUT) { + fifo_sel |= RUSB2_CFIFOSEL_ISEL_WRITE; + } + rusb->CFIFOSEL = fifo_sel; + while ((rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) != (fifo_sel & RUSB2_CFIFOSEL_ISEL_WRITE)) { + // wait until ISEL_WRITE take effect } pipe_state_t *pipe = &_hcd.pipe[0]; diff --git a/src/portable/renesas/rusb2/rusb2_common.c b/src/portable/renesas/rusb2/rusb2_common.c index 3ed6f2be1..8addbe4c6 100644 --- a/src/portable/renesas/rusb2/rusb2_common.c +++ b/src/portable/renesas/rusb2/rusb2_common.c @@ -25,23 +25,21 @@ */ #include "tusb_option.h" -#include "osal/osal.h" -#include "common/tusb_fifo.h" #if defined(TUP_USBIP_RUSB2) && (CFG_TUH_ENABLED || CFG_TUD_ENABLED) -#include "rusb2_type.h" + #include "osal/osal.h" + #include "common/tusb_fifo.h" -#if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) -#include "rusb2_rx.h" + #include "rusb2_common.h" -#elif TU_CHECK_MCU(OPT_MCU_RAXXX) -#include "rusb2_ra.h" + #if TU_CHECK_MCU(OPT_MCU_RAXXX) + #include "rusb2_ra.h" // USBFS_INT_IRQn and USBHS_USB_INT_RESUME_IRQn are generated by FSP rusb2_controller_t rusb2_controller[] = { - { .reg_base = R_USB_FS0_BASE, .irqnum = USBFS_INT_IRQn }, + {.reg_base = R_USB_FS0_BASE, .irqnum = USBFS_INT_IRQn}, #ifdef RUSB2_SUPPORT_HIGHSPEED - { .reg_base = R_USB_HS0_BASE, .irqnum = USBHS_USB_INT_RESUME_IRQn }, + {.reg_base = R_USB_HS0_BASE, .irqnum = USBHS_USB_INT_RESUME_IRQn}, #endif }; @@ -50,12 +48,11 @@ void tusb_rusb2_set_irqnum(uint8_t rhport, int32_t irqnum); void tusb_rusb2_set_irqnum(uint8_t rhport, int32_t irqnum) { rusb2_controller[rhport].irqnum = irqnum; } + #endif -#else - #error "Unsupported MCU" -#endif - - +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ static void hwfifo_set_mbw(rusb2_reg_t *rusb, uintptr_t hwfifo, uint16_t mbw) { volatile uint16_t *fifo_sel; if (hwfifo == (uintptr_t)&rusb->CFIFO) { diff --git a/src/portable/renesas/rusb2/rusb2_common.h b/src/portable/renesas/rusb2/rusb2_common.h new file mode 100644 index 000000000..6b8c3d7f2 --- /dev/null +++ b/src/portable/renesas/rusb2/rusb2_common.h @@ -0,0 +1,58 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#pragma once + +#include "common/tusb_common.h" +#include "rusb2_type.h" + +#if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) + #include "rusb2_rx.h" +#elif TU_CHECK_MCU(OPT_MCU_RAXXX) + #include "rusb2_ra.h" + + // Hack for D0FIFO definitions on RA Cortex-M23 + #if defined(RENESAS_CORTEX_M23) + #define D0FIFO CFIFO + #define D0FIFOSEL CFIFOSEL + #define D0FIFOSEL_b CFIFOSEL_b + #define D1FIFOSEL CFIFOSEL + #define D1FIFOSEL_b CFIFOSEL_b + #define D0FIFOCTR CFIFOCTR + #define D0FIFOCTR_b CFIFOCTR_b + #endif + +#else + #error "Unsupported MCU" +#endif + + +//--------------------------------------------------------------------+ +// Common +//--------------------------------------------------------------------+ + +enum { + FIFOSEL_BIGEND = (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0) +}; diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index cf685ea3c..21f116857 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -41,10 +41,9 @@ extern "C" { #define _ccrx_evenaccess #endif -/*--------------------------------------------------------------------*/ -/* Register Definitions */ -/*--------------------------------------------------------------------*/ - +//--------------------------------------------------------------------+ +// Register Definitions +//--------------------------------------------------------------------+ /* Start of definition of packed structs (used by the CCRX toolchain) */ TU_ATTR_PACKED_BEGIN TU_ATTR_BIT_FIELD_ORDER_BEGIN -- cgit v1.3.1 From 74e59e433db41cc6045e29a4723fc4e72ab9dcde Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 5 Jan 2026 22:50:23 +0700 Subject: fix hwfifo pull/push n with address stride > 0 --- src/common/tusb_fifo.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 362439fb8..ee07f66df 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -115,13 +115,14 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { //--------------------------------------------------------------------+ #if CFG_TUSB_FIFO_HWFIFO_API #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE - #define HWFIFO_ADDR_NEXT(_const, _hwfifo) \ - _hwfifo = (_const volatile void *)((uintptr_t)(_hwfifo) + CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE) + #define HWFIFO_ADDR_NEXT_N(_hwfifo, _const, _n) _hwfifo = (_const volatile void *)((uintptr_t)(_hwfifo) + _n) #else - #define HWFIFO_ADDR_NEXT(_const, _hwfifo) + #define HWFIFO_ADDR_NEXT_N(_hwfifo, _const, _n) #endif -#ifndef CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE + #define HWFIFO_ADDR_NEXT(_hwfifo, _const) HWFIFO_ADDR_NEXT_N(_hwfifo, _const, CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE) + + #ifndef CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE static void stride_write(volatile void *hwfifo, const void *src, uint8_t data_stride) { #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 if (data_stride == 4) { @@ -143,8 +144,7 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, co stride_write(hwfifo, src, data_stride); src += data_stride; len -= data_stride; - - HWFIFO_ADDR_NEXT(, hwfifo); + HWFIFO_ADDR_NEXT(hwfifo, ); } // Write odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit @@ -152,6 +152,7 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, co uint32_t tmp = 0u; memcpy(&tmp, src, len); stride_write(hwfifo, &tmp, data_stride); + HWFIFO_ADDR_NEXT(hwfifo, ); } } #endif @@ -177,8 +178,7 @@ void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, co stride_read(hwfifo, dest, data_stride); dest += data_stride; len -= data_stride; - - HWFIFO_ADDR_NEXT(const, hwfifo); + HWFIFO_ADDR_NEXT(hwfifo, const); } // Read odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit @@ -186,10 +186,12 @@ void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, co uint32_t tmp; stride_read(hwfifo, &tmp, data_stride); memcpy(dest, &tmp, len); + HWFIFO_ADDR_NEXT(hwfifo, const); } } #endif +// push to sw fifo from hwfifo static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, const tu_hwfifo_access_t *access_mode) { uint16_t lin_bytes = f->depth - wr_ptr; @@ -208,6 +210,7 @@ static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uin const uint32_t odd_mask = data_stride - 1; uint16_t lin_even = lin_bytes & ~odd_mask; tu_hwfifo_read(hwfifo, ff_buf, lin_even, access_mode); + HWFIFO_ADDR_NEXT_N(hwfifo, const, lin_even); ff_buf += lin_even; // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary @@ -217,6 +220,7 @@ static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uin const uint8_t wrap_odd = (uint8_t)tu_min16(wrap_bytes, data_stride - lin_odd); uint8_t buf_temp[4]; tu_hwfifo_read(hwfifo, buf_temp, lin_odd + wrap_odd, access_mode); + HWFIFO_ADDR_NEXT(hwfifo, const); for (uint8_t i = 0; i < lin_odd; ++i) { ff_buf[i] = buf_temp[i]; @@ -238,6 +242,7 @@ static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uin } } +// pull from sw fifo to hwfifo static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, const tu_hwfifo_access_t *access_mode) { uint16_t lin_bytes = f->depth - rd_ptr; @@ -257,6 +262,7 @@ static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t const uint32_t odd_mask = data_stride - 1; uint16_t lin_even = lin_bytes & ~odd_mask; tu_hwfifo_write(hwfifo, ff_buf, lin_even, access_mode); + HWFIFO_ADDR_NEXT_N(hwfifo, , lin_even); ff_buf += lin_even; // There could be odd 1 byte (16bit) or 1-3 bytes (32bit) before the wrap-around boundary @@ -273,6 +279,7 @@ static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t } tu_hwfifo_write(hwfifo, buf_temp, lin_odd + wrap_odd, access_mode); + HWFIFO_ADDR_NEXT(hwfifo, ); wrap_bytes -= wrap_odd; ff_buf = f->buffer + wrap_odd; // wrap around -- cgit v1.3.1 From 20d009daa1f886432d42a2f56ce8edfe62e3b0de Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 5 Jan 2026 23:42:05 +0700 Subject: enable dedidcated hwfifo for musb with odd access with 16-bit and 8-bit --- src/common/tusb_fifo.c | 65 +++++++++++++++++++++++++++----- src/portable/mentor/musb/dcd_musb.c | 74 +++---------------------------------- src/tusb_option.h | 9 ++++- 3 files changed, 69 insertions(+), 79 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index ee07f66df..a92435912 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -123,8 +123,8 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { #define HWFIFO_ADDR_NEXT(_hwfifo, _const) HWFIFO_ADDR_NEXT_N(_hwfifo, _const, CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE) #ifndef CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE -static void stride_write(volatile void *hwfifo, const void *src, uint8_t data_stride) { - #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 +static inline void stride_write(volatile void *hwfifo, const void *src, uint8_t data_stride) { + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 if (data_stride == 4) { *((volatile uint32_t *)hwfifo) = tu_unaligned_read32(src); } @@ -147,6 +147,25 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, co HWFIFO_ADDR_NEXT(hwfifo, ); } + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS + // 16-bit access is allowed for odd bytes + if (len >= 2) { + *((volatile uint16_t *)hwfifo) = tu_unaligned_read16(src); + src += 2; + len -= 2; + HWFIFO_ADDR_NEXT_N(hwfifo, , 2); + } + #endif + + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_8BIT_ACCESS + // 8-bit access is allowed for odd bytes + while (len > 0) { + *((volatile uint8_t *)hwfifo) = *src++; + len--; + HWFIFO_ADDR_NEXT_N(hwfifo, , 1); + } + #else + // Write odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit if (len > 0) { uint32_t tmp = 0u; @@ -154,21 +173,30 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, co stride_write(hwfifo, &tmp, data_stride); HWFIFO_ADDR_NEXT(hwfifo, ); } + #endif } #endif #ifndef CFG_TUSB_FIFO_HWFIFO_CUSTOM_READ -static void stride_read(const volatile void *hwfifo, void *dest, uint8_t data_stride) { - #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 - if (data_stride == 4) { +static inline void stride_read(const volatile void *hwfifo, void *dest, uint8_t data_stride) { + (void)data_stride; // possible unused + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE != 4 + if (data_stride == 4) + #endif + { tu_unaligned_write32(dest, *((const volatile uint32_t *)hwfifo)); } - #endif - #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 2 - if (data_stride == 2) { + #endif + + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 2 + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE != 2 + if (data_stride == 2) + #endif + { tu_unaligned_write16(dest, *((const volatile uint16_t *)hwfifo)); } - #endif + #endif } void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, const tu_hwfifo_access_t *access_mode) { @@ -181,6 +209,24 @@ void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, co HWFIFO_ADDR_NEXT(hwfifo, const); } + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS + // 16-bit access is allowed for odd bytes + if (len >= 2) { + tu_unaligned_write16(dest, *((const volatile uint16_t *)hwfifo)); + dest += 2; + len -= 2; + HWFIFO_ADDR_NEXT_N(hwfifo, const, 2); + } + #endif + + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_8BIT_ACCESS + // 8-bit access is allowed for odd bytes + while (len > 0) { + *dest++ = *((const volatile uint8_t *)hwfifo); + len--; + HWFIFO_ADDR_NEXT_N(hwfifo, const, 1); + } + #else // Read odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit if (len > 0) { uint32_t tmp; @@ -188,6 +234,7 @@ void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, co memcpy(dest, &tmp, len); HWFIFO_ADDR_NEXT(hwfifo, const); } + #endif } #endif diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index ad20d64bd..3827be318 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -170,68 +170,6 @@ TU_ATTR_ALWAYS_INLINE static inline void hwfifo_flush(musb_regs_t* musb, unsigne } } -static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) -{ - volatile hw_fifo_t *reg = (volatile hw_fifo_t*)fifo; - uintptr_t addr = (uintptr_t)buf; - while (len >= 4) { - reg->u32 = *(uint32_t const *)addr; - addr += 4; - len -= 4; - } - if (len >= 2) { - reg->u16 = *(uint16_t const *)addr; - addr += 2; - len -= 2; - } - if (len) { - reg->u8 = *(uint8_t const *)addr; - } -} - -static void pipe_read_packet(void *buf, volatile void *fifo, unsigned len) -{ - volatile hw_fifo_t *reg = (volatile hw_fifo_t*)fifo; - uintptr_t addr = (uintptr_t)buf; - while (len >= 4) { - *(uint32_t *)addr = reg->u32; - addr += 4; - len -= 4; - } - if (len >= 2) { - *(uint16_t *)addr = reg->u16; - addr += 2; - len -= 2; - } - if (len) { - *(uint8_t *)addr = reg->u8; - } -} - -static void pipe_read_write_packet_ff(tu_fifo_t *f, volatile void *fifo, unsigned len, unsigned dir) -{ - static const struct { - void (*tu_fifo_get_info)(tu_fifo_t *f, tu_fifo_buffer_info_t *info); - void (*tu_fifo_advance)(tu_fifo_t *f, uint16_t n); - void (*pipe_read_write)(void *buf, volatile void *fifo, unsigned len); - } ops[] = { - /* OUT */ {tu_fifo_get_write_info,tu_fifo_advance_write_pointer,pipe_read_packet}, - /* IN */ {tu_fifo_get_read_info, tu_fifo_advance_read_pointer, pipe_write_packet}, - }; - tu_fifo_buffer_info_t info; - ops[dir].tu_fifo_get_info(f, &info); - unsigned total_len = len; - len = TU_MIN(total_len, info.linear.len); - ops[dir].pipe_read_write(info.linear.ptr, fifo, len); - unsigned rem = total_len - len; - if (rem) { - len = TU_MIN(rem, info.wrapped.len); - ops[dir].pipe_read_write(info.wrapped.ptr, fifo, len); - rem -= len; - } - ops[dir].tu_fifo_advance(f, total_len - rem); -} - static void process_setup_packet(uint8_t rhport) { musb_regs_t* musb_regs = MUSB_REGS(rhport); @@ -277,9 +215,9 @@ static bool handle_xfer_in(uint8_t rhport, uint_fast8_t ep_addr) // TU_LOG1(" %p mps %d len %d rem %d\r\n", buf, mps, len, rem); if (len) { if (_dcd.pipe_buf_is_fifo[TUSB_DIR_IN] & TU_BIT(epnum_minus1)) { - pipe_read_write_packet_ff(buf, fifo_ptr, len, TUSB_DIR_IN); + tu_hwfifo_write_from_fifo(fifo_ptr, (tu_fifo_t *)buf, len, NULL); } else { - pipe_write_packet(buf, fifo_ptr, len); + tu_hwfifo_write(fifo_ptr, buf, len, NULL); pipe->buf = buf + len; } pipe->remaining = rem - len; @@ -308,9 +246,9 @@ static bool handle_xfer_out(uint8_t rhport, uint_fast8_t ep_addr) volatile void *fifo_ptr = &musb_regs->fifo[epnum]; if (len) { if (_dcd.pipe_buf_is_fifo[TUSB_DIR_OUT] & TU_BIT(epnum_minus1)) { - pipe_read_write_packet_ff(buf, fifo_ptr, len, TUSB_DIR_OUT); + tu_hwfifo_read_to_fifo(fifo_ptr, (tu_fifo_t *)buf, len, NULL); } else { - pipe_read_packet(buf, fifo_ptr, len); + tu_hwfifo_read(fifo_ptr, buf, len, NULL); pipe->buf = buf + len; } pipe->remaining = rem - len; @@ -378,7 +316,7 @@ static bool edpt0_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_ const unsigned len = TU_MIN(TU_MIN(rem, 64), total_bytes); volatile void *fifo_ptr = &musb_regs->fifo[0]; if (dir_in) { - pipe_write_packet(buffer, fifo_ptr, len); + tu_hwfifo_write(fifo_ptr, buffer, len, NULL); _dcd.pipe0.buf = buffer + len; _dcd.pipe0.length = len; @@ -458,7 +396,7 @@ static void process_ep0(uint8_t rhport) const unsigned rem = _dcd.pipe0.remaining; const unsigned len = TU_MIN(TU_MIN(rem, 64), vld); volatile void *fifo_ptr = &musb_regs->fifo[0]; - pipe_read_packet(_dcd.pipe0.buf, fifo_ptr, len); + tu_hwfifo_read(fifo_ptr, _dcd.pipe0.buf, len, NULL); _dcd.pipe0.remaining = rem - len; _dcd.remaining_ctrl -= len; diff --git a/src/tusb_option.h b/src/tusb_option.h index 453dddb7c..87aba6a6c 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -365,13 +365,18 @@ //------------ MUSB --------------// #if defined(TUP_USBIP_MUSB) - #define CFG_TUD_EDPT_DEDICATED_HWFIFO 0 // need testing to enable + #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32 bit data + #define CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS // allow odd 16bit access + #define CFG_TUSB_FIFO_HWFIFO_DATA_ODD_8BIT_ACCESS // allow odd 8bit access + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 // fixed hwfifo + #endif //------------ RUSB2 --------------// #if defined(TUP_USBIP_RUSB2) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (2 + (TUD_OPT_HIGH_SPEED ? 4 : 0)) // 16 bit and 32 bit data if highspeed + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (2 | (TUD_OPT_HIGH_SPEED ? 4 : 0)) // 16 bit and 32 bit data if highspeed #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE // custom write since rusb2 can change access width 32 -> 16 and can write // odd byte with byte access -- cgit v1.3.1 From 1c19fc540868d699bd7eedba741108dfabb36c00 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 6 Jan 2026 00:56:33 +0700 Subject: rename FSDEV_PMA_SIZE CFG_TUSB_FSDEV_PMA_SIZE --- src/common/tusb_mcu.h | 36 ++-- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 286 +++++++++++++------------- src/portable/st/stm32_fsdev/fsdev_common.h | 108 +++++----- src/portable/st/stm32_fsdev/fsdev_stm32.h | 2 +- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 2 +- src/portable/synopsys/dwc2/hcd_dwc2.c | 6 +- src/tusb_option.h | 6 +- 7 files changed, 217 insertions(+), 229 deletions(-) diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 8dd4078c4..d546703bc 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -179,12 +179,12 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32C0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 2048u + #define CFG_TUSB_FSDEV_PMA_SIZE 2048u #elif TU_CHECK_MCU(OPT_MCU_STM32F0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 1024u + #define CFG_TUSB_FSDEV_PMA_SIZE 1024u #elif TU_CHECK_MCU(OPT_MCU_STM32F1) // - F102, F103 use fsdev @@ -200,7 +200,7 @@ defined(STM32F103xE) || defined(STM32F103xG) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 512u + #define CFG_TUSB_FSDEV_PMA_SIZE 512u #else #error "Unsupported STM32F1 mcu" #endif @@ -218,10 +218,10 @@ #if defined(STM32F302xB) || defined(STM32F302xC) || defined(STM32F303xB) || defined(STM32F303xC) || \ defined(STM32F373xC) - #define FSDEV_PMA_SIZE 512u + #define CFG_TUSB_FSDEV_PMA_SIZE 512u #elif defined(STM32F302x6) || defined(STM32F302x8) || defined(STM32F302xD) || defined(STM32F302xE) || \ defined(STM32F303xD) || defined(STM32F303xE) - #define FSDEV_PMA_SIZE 1024u + #define CFG_TUSB_FSDEV_PMA_SIZE 1024u #else #error "Unsupported STM32F3 mcu" #endif @@ -253,13 +253,13 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32G0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 2048u + #define CFG_TUSB_FSDEV_PMA_SIZE 2048u #elif TU_CHECK_MCU(OPT_MCU_STM32G4) // Device controller #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 1024u + #define CFG_TUSB_FSDEV_PMA_SIZE 1024u // TypeC controller #define TUP_USBIP_TYPEC_STM32 @@ -268,7 +268,7 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32H5) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 2048u + #define CFG_TUSB_FSDEV_PMA_SIZE 2048u #elif TU_CHECK_MCU(OPT_MCU_STM32H7) #include "stm32h7xx.h" @@ -302,12 +302,12 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32L0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 1024u + #define CFG_TUSB_FSDEV_PMA_SIZE 1024u #elif TU_CHECK_MCU(OPT_MCU_STM32L1) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 512u + #define CFG_TUSB_FSDEV_PMA_SIZE 512u #elif TU_CHECK_MCU(OPT_MCU_STM32L4) // - L4x2, L4x3 use fsdev @@ -324,7 +324,7 @@ defined(STM32L442xx) || defined(STM32L443xx) || defined(STM32L452xx) || defined(STM32L462xx) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 1024u + #define CFG_TUSB_FSDEV_PMA_SIZE 1024u #else #error "Unsupported STM32L4 mcu" #endif @@ -332,24 +332,24 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32L5) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE (1024u) + #define CFG_TUSB_FSDEV_PMA_SIZE (1024u) #elif TU_CHECK_MCU(OPT_MCU_STM32U0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 1024u + #define CFG_TUSB_FSDEV_PMA_SIZE 1024u #elif TU_CHECK_MCU(OPT_MCU_STM32U3) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 2048u + #define CFG_TUSB_FSDEV_PMA_SIZE 2048u #elif TU_CHECK_MCU(OPT_MCU_STM32U5) // U535/545 use fsdev #if defined(STM32U535xx) || defined(STM32U545xx) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 2048u + #define CFG_TUSB_FSDEV_PMA_SIZE 2048u #else #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 @@ -367,7 +367,7 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32WB) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define FSDEV_PMA_SIZE 1024u + #define CFG_TUSB_FSDEV_PMA_SIZE 1024u #elif TU_CHECK_MCU(OPT_MCU_STM32WBA) #define TUP_USBIP_DWC2 @@ -572,7 +572,7 @@ #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_CH32 - #define FSDEV_PMA_SIZE 512u + #define CFG_TUSB_FSDEV_PMA_SIZE 512u // default to FSDEV for device #if !defined(CFG_TUD_WCH_USBIP_USBFS) @@ -621,7 +621,7 @@ #elif TU_CHECK_MCU(OPT_MCU_AT32F403A_407, OPT_MCU_AT32F413) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_AT32 - #define FSDEV_PMA_SIZE 512u + #define CFG_TUSB_FSDEV_PMA_SIZE 512u #elif TU_CHECK_MCU(OPT_MCU_AT32F415) #define TUP_USBIP_DWC2 diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 72527a9ec..22a9e4af8 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -108,11 +108,10 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && defined(TUP_USBIP_FSDEV) && \ - !(defined(TUP_USBIP_FSDEV_CH32) && CFG_TUD_WCH_USBIP_FSDEV == 0) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_FSDEV) && !(defined(TUP_USBIP_FSDEV_CH32) && CFG_TUD_WCH_USBIP_FSDEV == 0) -#include "device/dcd.h" -#include "fsdev_common.h" + #include "device/dcd.h" + #include "fsdev_common.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF @@ -120,25 +119,25 @@ // One of these for every EP IN & OUT, uses a bit of RAM.... typedef struct { - uint8_t *buffer; + uint8_t *buffer; tu_fifo_t *ff; - uint16_t total_len; - uint16_t queued_len; - uint16_t max_packet_size; - uint8_t ep_idx; // index for USB_EPnR register - bool iso_in_sending; // Workaround for ISO IN EP doesn't have interrupt mask + uint16_t total_len; + uint16_t queued_len; + uint16_t max_packet_size; + uint8_t ep_idx; // index for USB_EPnR register + bool iso_in_sending; // Workaround for ISO IN EP doesn't have interrupt mask } xfer_ctl_t; // EP allocator typedef struct { uint8_t ep_num; uint8_t ep_type; - bool allocated[2]; + bool allocated[2]; } ep_alloc_t; static xfer_ctl_t xfer_status[CFG_TUD_ENDPPOINT_MAX][2]; static ep_alloc_t ep_alloc_status[FSDEV_EP_COUNT]; -static uint8_t remoteWakeCountdown; // When wake is requested +static uint8_t remoteWakeCountdown; // When wake is requested //--------------------------------------------------------------------+ // Prototypes @@ -152,12 +151,12 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, tusb_dir_t dir); // PMA allocation/access static uint16_t ep_buf_ptr; ///< Points to first free memory location static uint32_t dcd_pma_alloc(uint16_t len, bool dbuf); -static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type); +static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type); static void edpt0_open(uint8_t rhport); TU_ATTR_ALWAYS_INLINE static inline void edpt0_prepare_setup(void) { - btable_set_rx_bufsize(0, BTABLE_BUF_RX, 8); + btable_set_rx_bufsize(0, BTABLE_BUF_RX, 8); } //--------------------------------------------------------------------+ @@ -171,21 +170,21 @@ TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint8_t epnum, uint //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ -bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { - (void) rh_init; +bool dcd_init(uint8_t rhport, const tusb_rhport_init_t *rh_init) { + (void)rh_init; fsdev_core_reset(); FSDEV_REG->CNTR = 0; // Enable USB -#if !defined(FSDEV_BUS_32BIT) + #if !defined(FSDEV_BUS_32BIT) // BTABLE register does not exist any more on 32-bit bus devices FSDEV_REG->BTABLE = FSDEV_BTABLE_BASE; -#endif + #endif // Enable interrupts for device mode - FSDEV_REG->CNTR |= USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | - USB_CNTR_SUSPM | USB_CNTR_WKUPM | USB_CNTR_PMAOVRM; + FSDEV_REG->CNTR |= + USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM | USB_CNTR_PMAOVRM; handle_bus_reset(rhport); @@ -236,8 +235,8 @@ static void handle_bus_reset(uint8_t rhport) { for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { // Clear EP allocation status - ep_alloc_status[i].ep_num = 0xFF; - ep_alloc_status[i].ep_type = 0xFF; + ep_alloc_status[i].ep_num = 0xFF; + ep_alloc_status[i].ep_type = 0xFF; ep_alloc_status[i].allocated[0] = false; ep_alloc_status[i].allocated[1] = false; } @@ -245,7 +244,7 @@ static void handle_bus_reset(uint8_t rhport) { // Reset PMA allocation ep_buf_ptr = FSDEV_BTABLE_BASE + 8 * FSDEV_EP_COUNT; - edpt0_open(rhport); // open control endpoint (both IN & OUT) + edpt0_open(rhport); // open control endpoint (both IN & OUT) FSDEV_REG->DADDR = USB_DADDR_EF; // Enable USB Function } @@ -254,8 +253,8 @@ static void handle_bus_reset(uint8_t rhport) { static void handle_ctr_tx(uint32_t ep_id) { uint32_t ep_reg = ep_read(ep_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; - uint8_t const ep_num = ep_reg & USB_EPADDR_FIELD; - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, TUSB_DIR_IN); + const uint8_t ep_num = ep_reg & USB_EPADDR_FIELD; + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, TUSB_DIR_IN); if (ep_is_iso(ep_reg)) { // Ignore spurious interrupts that we don't schedule @@ -265,11 +264,11 @@ static void handle_ctr_tx(uint32_t ep_id) { return; } xfer->iso_in_sending = false; -#if FSDEV_USE_SBUF_ISO == 0 + #if FSDEV_USE_SBUF_ISO == 0 uint8_t buf_id = (ep_reg & USB_EP_DTOG_TX) ? 0 : 1; -#else + #else uint8_t buf_id = BTABLE_BUF_TX; -#endif + #endif btable_set_count(ep_id, buf_id, 0); } @@ -282,8 +281,8 @@ static void handle_ctr_tx(uint32_t ep_id) { static void handle_ctr_setup(uint32_t ep_id) { uint16_t rx_count = btable_get_count(ep_id, BTABLE_BUF_RX); - uint16_t rx_addr = btable_get_addr(ep_id, BTABLE_BUF_RX); - uint8_t setup_packet[8] TU_ATTR_ALIGNED(4); + uint16_t rx_addr = btable_get_addr(ep_id, BTABLE_BUF_RX); + uint8_t setup_packet[8] TU_ATTR_ALIGNED(4); tu_hwfifo_read(PMA_BUF_AT(rx_addr), setup_packet, rx_count, NULL); @@ -292,7 +291,7 @@ static void handle_ctr_setup(uint32_t ep_id) { // Setup packet should always be 8 bytes. If not, we probably missed the packet if (rx_count == 8) { - dcd_event_setup_received(0, (uint8_t*) setup_packet, true); + dcd_event_setup_received(0, (uint8_t *)setup_packet, true); // Hardware should reset EP0 RX/TX to NAK and both toggle to 1 } else { // Missed setup packet !!! @@ -303,24 +302,24 @@ static void handle_ctr_setup(uint32_t ep_id) { // Handle CTR interrupt for the RX/OUT direction static void handle_ctr_rx(uint32_t ep_id) { - uint32_t ep_reg = ep_read(ep_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; - uint8_t const ep_num = ep_reg & USB_EPADDR_FIELD; - bool const is_iso = ep_is_iso(ep_reg); - xfer_ctl_t* xfer = xfer_ctl_ptr(ep_num, TUSB_DIR_OUT); + uint32_t ep_reg = ep_read(ep_id) | USB_EP_CTR_TX | USB_EP_CTR_RX; + const uint8_t ep_num = ep_reg & USB_EPADDR_FIELD; + const bool is_iso = ep_is_iso(ep_reg); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, TUSB_DIR_OUT); uint8_t buf_id; -#if FSDEV_USE_SBUF_ISO == 0 + #if FSDEV_USE_SBUF_ISO == 0 bool const dbl_buf = is_iso; -#else + #else bool const dbl_buf = false; -#endif + #endif if (dbl_buf) { buf_id = (ep_reg & USB_EP_DTOG_RX) ? 0 : 1; } else { buf_id = BTABLE_BUF_RX; } - const uint16_t rx_count = btable_get_count(ep_id, buf_id); - uint16_t pma_addr = (uint16_t) btable_get_addr(ep_id, buf_id); + const uint16_t rx_count = btable_get_count(ep_id, buf_id); + uint16_t pma_addr = (uint16_t)btable_get_addr(ep_id, buf_id); fsdev_pma_buf_t *pma_buf = PMA_BUF_AT(pma_addr); if (xfer->ff) { @@ -344,7 +343,7 @@ static void handle_ctr_rx(uint32_t ep_id) { } else { // Set endpoint active again for receiving more data. Note that isochronous endpoints stay active always if (!is_iso) { - uint16_t const cnt = tu_min16(xfer->total_len - xfer->queued_len, xfer->max_packet_size); + const uint16_t cnt = tu_min16(xfer->total_len - xfer->queued_len, xfer->max_packet_size); btable_set_rx_bufsize(ep_id, BTABLE_BUF_RX, cnt); } ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(TUSB_DIR_OUT); // will change RX Status, reserved other toggle bits @@ -404,18 +403,18 @@ void dcd_int_handler(uint8_t rhport) { // loop to handle all pending CTR interrupts while (FSDEV_REG->ISTR & USB_ISTR_CTR) { // skip DIR bit, and use CTR TX/RX instead, since there is chance we have both TX/RX completed in one interrupt - uint32_t const ep_id = FSDEV_REG->ISTR & USB_ISTR_EP_ID; - uint32_t const ep_reg = ep_read(ep_id); + const uint32_t ep_id = FSDEV_REG->ISTR & USB_ISTR_EP_ID; + const uint32_t ep_reg = ep_read(ep_id); if (ep_reg & USB_EP_CTR_RX) { - #ifdef FSDEV_BUS_32BIT + #ifdef FSDEV_BUS_32BIT /* https://www.st.com/resource/en/errata_sheet/es0561-stm32h503cbebkbrb-device-errata-stmicroelectronics.pdf * https://www.st.com/resource/en/errata_sheet/es0587-stm32u535xx-and-stm32u545xx-device-errata-stmicroelectronics.pdf * From H503/U535 errata: Buffer description table update completes after CTR interrupt triggers * Description: - * - During OUT transfers, the correct transfer interrupt (CTR) is triggered a little before the last USB SRAM accesses - * have completed. If the software responds quickly to the interrupt, the full buffer contents may not be correct. - * Workaround: + * - During OUT transfers, the correct transfer interrupt (CTR) is triggered a little before the last USB SRAM + * accesses have completed. If the software responds quickly to the interrupt, the full buffer contents may not be + * correct. Workaround: * - Software should ensure that a small delay is included before accessing the SRAM contents. This delay * should be 800 ns in Full Speed mode and 6.4 μs in Low Speed mode * - Since H5 can run up to 250Mhz -> 1 cycle = 4ns. Per errata, we need to wait 200 cycles. Though executing code @@ -426,9 +425,9 @@ void dcd_int_handler(uint8_t rhport) { */ volatile uint32_t cycle_count = 20; // defined as PCD_RX_PMA_CNT in stm32 hal_driver while (cycle_count > 0U) { - cycle_count--; // each count take 3 cycles (1 for sub, jump, and compare) + cycle_count--; // each count take 3 cycles (1 for sub, jump, and compare) } - #endif + #endif if (ep_reg & USB_EP_SETUP) { handle_ctr_setup(ep_id); // CTR will be clear after copied setup packet @@ -456,14 +455,13 @@ void dcd_int_handler(uint8_t rhport) { // Invoked when a control transfer's status stage is complete. // May help DCD to prepare for next control transfer, this API is optional. -void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { +void dcd_edpt0_status_complete(uint8_t rhport, const tusb_control_request_t *request) { (void)rhport; if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && - request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && - request->bRequest == TUSB_REQ_SET_ADDRESS) { - uint8_t const dev_addr = (uint8_t)request->wValue; - FSDEV_REG->DADDR = (USB_DADDR_EF | dev_addr); + request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && request->bRequest == TUSB_REQ_SET_ADDRESS) { + const uint8_t dev_addr = (uint8_t)request->wValue; + FSDEV_REG->DADDR = (USB_DADDR_EF | dev_addr); } edpt0_prepare_setup(); @@ -474,15 +472,14 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *req * In case of double buffering, high 16bit is the address of 2nd buffer * During failure, TU_ASSERT is used. If this happens, rework/reallocate memory manually. */ -static uint32_t dcd_pma_alloc(uint16_t len, bool dbuf) -{ - uint8_t blsize, num_block; +static uint32_t dcd_pma_alloc(uint16_t len, bool dbuf) { + uint8_t blsize, num_block; uint16_t aligned_len = pma_align_buffer_size(len, &blsize, &num_block); - (void) blsize; - (void) num_block; + (void)blsize; + (void)num_block; uint32_t addr = ep_buf_ptr; - ep_buf_ptr = (uint16_t)(ep_buf_ptr + aligned_len); // increment buffer pointer + ep_buf_ptr = (uint16_t)(ep_buf_ptr + aligned_len); // increment buffer pointer if (dbuf) { addr |= ((uint32_t)ep_buf_ptr) << 16; @@ -490,7 +487,7 @@ static uint32_t dcd_pma_alloc(uint16_t len, bool dbuf) } // Verify packet buffer is not overflowed - TU_ASSERT(ep_buf_ptr <= FSDEV_PMA_SIZE, 0xFFFF); + TU_ASSERT(ep_buf_ptr <= CFG_TUSB_FSDEV_PMA_SIZE, 0xFFFF); return addr; } @@ -498,35 +495,32 @@ static uint32_t dcd_pma_alloc(uint16_t len, bool dbuf) /*** * Allocate hardware endpoint */ -static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); +static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) { + const uint8_t epnum = tu_edpt_number(ep_addr); + const uint8_t dir = tu_edpt_dir(ep_addr); for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { // Check if already allocated - if (ep_alloc_status[i].allocated[dir] && - ep_alloc_status[i].ep_type == ep_type && + if (ep_alloc_status[i].allocated[dir] && ep_alloc_status[i].ep_type == ep_type && ep_alloc_status[i].ep_num == epnum) { return i; } -#if FSDEV_USE_SBUF_ISO == 0 + #if FSDEV_USE_SBUF_ISO == 0 bool const dbl_buf = ep_type == TUSB_XFER_ISOCHRONOUS; -#else + #else bool const dbl_buf = false; -#endif + #endif // If EP of current direction is not allocated // For double-buffered mode both directions needs to be free - if (!ep_alloc_status[i].allocated[dir] && - (!dbl_buf || !ep_alloc_status[i].allocated[dir ^ 1])) { + if (!ep_alloc_status[i].allocated[dir] && (!dbl_buf || !ep_alloc_status[i].allocated[dir ^ 1])) { // Check if EP number is the same if (ep_alloc_status[i].ep_num == 0xFF || ep_alloc_status[i].ep_num == epnum) { // One EP pair has to be the same type if (ep_alloc_status[i].ep_type == 0xFF || ep_alloc_status[i].ep_type == ep_type) { - ep_alloc_status[i].ep_num = epnum; - ep_alloc_status[i].ep_type = ep_type; + ep_alloc_status[i].ep_num = epnum; + ep_alloc_status[i].ep_type = ep_type; ep_alloc_status[i].allocated[dir] = true; return i; @@ -540,16 +534,16 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) } void edpt0_open(uint8_t rhport) { - (void) rhport; + (void)rhport; dcd_ep_alloc(0x0, TUSB_XFER_CONTROL); dcd_ep_alloc(0x80, TUSB_XFER_CONTROL); xfer_status[0][0].max_packet_size = CFG_TUD_ENDPOINT0_SIZE; - xfer_status[0][0].ep_idx = 0; + xfer_status[0][0].ep_idx = 0; xfer_status[0][1].max_packet_size = CFG_TUD_ENDPOINT0_SIZE; - xfer_status[0][1].ep_idx = 0; + xfer_status[0][1].ep_idx = 0; uint16_t pma_addr0 = dcd_pma_alloc(CFG_TUD_ENDPOINT0_SIZE, false); uint16_t pma_addr1 = dcd_pma_alloc(CFG_TUD_ENDPOINT0_SIZE, false); @@ -567,13 +561,13 @@ void edpt0_open(uint8_t rhport) { ep_write(0, ep_reg, false); } -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { +bool dcd_edpt_open(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { (void)rhport; - uint8_t const ep_addr = desc_ep->bEndpointAddress; - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); - const uint16_t packet_size = tu_edpt_packet_size(desc_ep); - uint8_t const ep_idx = dcd_ep_alloc(ep_addr, desc_ep->bmAttributes.xfer); + const uint8_t ep_addr = desc_ep->bEndpointAddress; + const uint8_t ep_num = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); + const uint16_t packet_size = tu_edpt_packet_size(desc_ep); + const uint8_t ep_idx = dcd_ep_alloc(ep_addr, desc_ep->bmAttributes.xfer); TU_ASSERT(ep_idx < FSDEV_EP_COUNT); uint32_t ep_reg = ep_read(ep_idx) & ~USB_EPREG_MASK; @@ -597,9 +591,9 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { uint16_t pma_addr = dcd_pma_alloc(packet_size, false); btable_set_addr(ep_idx, dir == TUSB_DIR_IN ? BTABLE_BUF_TX : BTABLE_BUF_RX, pma_addr); - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); xfer->max_packet_size = packet_size; - xfer->ep_idx = ep_idx; + xfer->ep_idx = ep_idx; ep_change_status(&ep_reg, dir, EP_STAT_NAK); ep_change_dtog(&ep_reg, dir, 0); @@ -623,8 +617,8 @@ void dcd_edpt_close_all(uint8_t rhport) { // Reset endpoint ep_write(i, 0, false); // Clear EP allocation status - ep_alloc_status[i].ep_num = 0xFF; - ep_alloc_status[i].ep_type = 0xFF; + ep_alloc_status[i].ep_num = 0xFF; + ep_alloc_status[i].ep_type = 0xFF; ep_alloc_status[i].allocated[0] = false; ep_alloc_status[i].allocated[1] = false; } @@ -638,46 +632,46 @@ void dcd_edpt_close_all(uint8_t rhport) { bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void)rhport; - uint8_t const ep_num = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - uint8_t const ep_idx = dcd_ep_alloc(ep_addr, TUSB_XFER_ISOCHRONOUS); + const uint8_t ep_num = tu_edpt_number(ep_addr); + const uint8_t dir = tu_edpt_dir(ep_addr); + const uint8_t ep_idx = dcd_ep_alloc(ep_addr, TUSB_XFER_ISOCHRONOUS); -#if CFG_TUD_FSDEV_DOUBLE_BUFFERED_ISO_EP != 0 - uint32_t pma_addr = dcd_pma_alloc(largest_packet_size, true); + #if CFG_TUD_FSDEV_DOUBLE_BUFFERED_ISO_EP != 0 + uint32_t pma_addr = dcd_pma_alloc(largest_packet_size, true); uint16_t pma_addr2 = pma_addr >> 16; -#else - uint32_t pma_addr = dcd_pma_alloc(largest_packet_size, false); + #else + uint32_t pma_addr = dcd_pma_alloc(largest_packet_size, false); uint16_t pma_addr2 = pma_addr; -#endif + #endif -#if FSDEV_USE_SBUF_ISO == 0 + #if FSDEV_USE_SBUF_ISO == 0 btable_set_addr(ep_idx, 0, pma_addr); btable_set_addr(ep_idx, 1, pma_addr2); -#else + #else btable_set_addr(ep_idx, dir == TUSB_DIR_IN ? BTABLE_BUF_TX : BTABLE_BUF_RX, pma_addr); - (void) pma_addr2; -#endif + (void)pma_addr2; + #endif - xfer_ctl_t* xfer = xfer_ctl_ptr(ep_num, dir); - xfer->ep_idx = ep_idx; + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + xfer->ep_idx = ep_idx; return true; } -bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { (void)rhport; - uint8_t const ep_addr = desc_ep->bEndpointAddress; - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_t* xfer = xfer_ctl_ptr(ep_num, dir); + const uint8_t ep_addr = desc_ep->bEndpointAddress; + const uint8_t ep_num = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); - uint8_t const ep_idx = xfer->ep_idx; + const uint8_t ep_idx = xfer->ep_idx; xfer->max_packet_size = tu_edpt_packet_size(desc_ep); uint32_t ep_reg = ep_read(ep_idx) & ~USB_EPREG_MASK; ep_reg |= tu_edpt_number(ep_addr) | USB_EP_ISOCHRONOUS | USB_EP_CTR_TX | USB_EP_CTR_RX; -#if FSDEV_USE_SBUF_ISO != 0 + #if FSDEV_USE_SBUF_ISO != 0 ep_reg |= USB_EP_KIND; ep_change_status(&ep_reg, dir, EP_STAT_DISABLED); @@ -688,12 +682,12 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) } else { ep_reg &= ~(USB_EPTX_STAT | USB_EP_DTOG_TX); } -#else + #else ep_change_status(&ep_reg, TUSB_DIR_IN, EP_STAT_DISABLED); ep_change_status(&ep_reg, TUSB_DIR_OUT, EP_STAT_DISABLED); ep_change_dtog(&ep_reg, dir, 0); ep_change_dtog(&ep_reg, (tusb_dir_t)(1 - dir), 1); -#endif + #endif ep_write(ep_idx, ep_reg, true); @@ -702,17 +696,17 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) // Currently, single-buffered, and only 64 bytes at a time (max) static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { - uint16_t len = tu_min16(xfer->total_len - xfer->queued_len, xfer->max_packet_size); + uint16_t len = tu_min16(xfer->total_len - xfer->queued_len, xfer->max_packet_size); uint32_t ep_reg = ep_read(ep_ix) | USB_EP_CTR_TX | USB_EP_CTR_RX; // reserve CTR - bool const is_iso = ep_is_iso(ep_reg); + const bool is_iso = ep_is_iso(ep_reg); uint8_t buf_id; -#if FSDEV_USE_SBUF_ISO == 0 + #if FSDEV_USE_SBUF_ISO == 0 bool const dbl_buf = is_iso; -#else + #else bool const dbl_buf = false; -#endif + #endif if (dbl_buf) { buf_id = (ep_reg & USB_EP_DTOG_TX) ? 1 : 0; } else { @@ -739,9 +733,9 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { } static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, tusb_dir_t dir) { - (void) rhport; + (void)rhport; - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); const uint8_t ep_idx = xfer->ep_idx; if (dir == TUSB_DIR_IN) { @@ -752,11 +746,11 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, tusb_dir_t dir) { uint16_t cnt = tu_min16(xfer->total_len, xfer->max_packet_size); -#if FSDEV_USE_SBUF_ISO == 0 + #if FSDEV_USE_SBUF_ISO == 0 bool const dbl_buf = ep_is_iso(ep_reg); -#else + #else bool const dbl_buf = false; -#endif + #endif if (dbl_buf) { btable_set_rx_bufsize(ep_idx, 0, cnt); btable_set_rx_bufsize(ep_idx, 1, cnt); @@ -771,29 +765,29 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, tusb_dir_t dir) { return true; } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr) { - (void) is_isr; - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes, bool is_isr) { + (void)is_isr; + const uint8_t ep_num = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); - xfer->buffer = buffer; - xfer->ff = NULL; - xfer->total_len = total_bytes; + xfer->buffer = buffer; + xfer->ff = NULL; + xfer->total_len = total_bytes; xfer->queued_len = 0; return edpt_xfer(rhport, ep_num, dir); } -bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr) { - (void) is_isr; - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, uint16_t total_bytes, bool is_isr) { + (void)is_isr; + const uint8_t ep_num = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); - xfer->buffer = NULL; - xfer->ff = ff; - xfer->total_len = total_bytes; + xfer->buffer = NULL; + xfer->ff = ff; + xfer->total_len = total_bytes; xfer->queued_len = 0; return edpt_xfer(rhport, ep_num, dir); @@ -801,10 +795,10 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); - uint8_t const ep_idx = xfer->ep_idx; + const uint8_t ep_num = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + const uint8_t ep_idx = xfer->ep_idx; uint32_t ep_reg = ep_read(ep_idx) | USB_EP_CTR_TX | USB_EP_CTR_RX; // reserve CTR bits ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(dir); @@ -816,10 +810,10 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); - uint8_t const ep_idx = xfer->ep_idx; + const uint8_t ep_num = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + const uint8_t ep_idx = xfer->ep_idx; uint32_t ep_reg = ep_read(ep_idx) | USB_EP_CTR_TX | USB_EP_CTR_RX; // reserve CTR bits ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(dir) | EP_DTOG_MASK(dir); @@ -839,7 +833,7 @@ void dcd_int_disable(uint8_t rhport) { fsdev_int_disable(rhport); } -#if defined(USB_BCDR_DPPU) || defined(SYSCFG_PMC_USB_PU) + #if defined(USB_BCDR_DPPU) || defined(SYSCFG_PMC_USB_PU) void dcd_connect(uint8_t rhport) { fsdev_connect(rhport); } @@ -847,6 +841,6 @@ void dcd_connect(uint8_t rhport) { void dcd_disconnect(uint8_t rhport) { fsdev_disconnect(rhport); } -#endif + #endif #endif diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 69440aa32..c53e345b0 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -32,11 +32,11 @@ #include "common/tusb_common.h" #if CFG_TUD_ENABLED -#include "device/dcd.h" + #include "device/dcd.h" #endif #if CFG_TUH_ENABLED -#include "host/hcd.h" + #include "host/hcd.h" #endif #if defined(TUP_USBIP_FSDEV_STM32) @@ -56,41 +56,37 @@ extern "C" { // If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it // Both of these MUST be a multiple of 2, and are in byte units. #ifndef FSDEV_BTABLE_BASE -#define FSDEV_BTABLE_BASE 0U + #define FSDEV_BTABLE_BASE 0U #endif TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 bytes"); -// FSDEV_PMA_SIZE is PMA buffer size in bytes. +// CFG_TUSB_FSDEV_PMA_SIZE is PMA buffer size in bytes. // - 512-byte devices, access with a stride of two words (use every other 16-bit address) // - 1024-byte devices, access with a stride of one word (use every 16-bit address) // - 2048-byte devices, access with 32-bit address // For purposes of accessing the packet -#if FSDEV_PMA_SIZE == 512 +#if CFG_TUSB_FSDEV_PMA_SIZE == 512 // 1x16 bit / word access scheme #define FSDEV_PMA_STRIDE 2 #define pma_access_scheme TU_ATTR_ALIGNED(4) -#elif FSDEV_PMA_SIZE == 1024 +#elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 // 2x16 bit / word access scheme - #define FSDEV_PMA_STRIDE 1 + #define FSDEV_PMA_STRIDE 1 #define pma_access_scheme -#elif FSDEV_PMA_SIZE == 2048 +#elif CFG_TUSB_FSDEV_PMA_SIZE == 2048 // 32 bit access scheme #define FSDEV_BUS_32BIT - #define FSDEV_PMA_STRIDE 1 + #define FSDEV_PMA_STRIDE 1 #define pma_access_scheme #endif // The fsdev_bus_t type can be used for both register and PMA access necessities #ifdef FSDEV_BUS_32BIT - typedef uint32_t fsdev_bus_t; - #define fsdevbus_unaligned_read(_addr) tu_unaligned_read32(_addr) - #define fsdevbus_unaligned_write(_addr, _value) tu_unaligned_write32(_addr, _value) +typedef uint32_t fsdev_bus_t; #else - typedef uint16_t fsdev_bus_t; - #define fsdevbus_unaligned_read(_addr) tu_unaligned_read16(_addr) - #define fsdevbus_unaligned_write(_addr, _value) tu_unaligned_write16(_addr, _value) +typedef uint16_t fsdev_bus_t; #endif enum { @@ -124,77 +120,77 @@ typedef union { } ep32[FSDEV_EP_COUNT][2]; } fsdev_btable_t; -TU_VERIFY_STATIC(sizeof(fsdev_btable_t) == FSDEV_EP_COUNT*8*FSDEV_PMA_STRIDE, "size is not correct"); -TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE does not fit in PMA RAM"); +TU_VERIFY_STATIC(sizeof(fsdev_btable_t) == FSDEV_EP_COUNT * 8 * FSDEV_PMA_STRIDE, "size is not correct"); +TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT * 8 <= CFG_TUSB_FSDEV_PMA_SIZE, "BTABLE does not fit in PMA RAM"); -#define FSDEV_BTABLE ((volatile fsdev_btable_t*) (FSDEV_PMA_BASE + FSDEV_PMA_STRIDE*(FSDEV_BTABLE_BASE))) +#define FSDEV_BTABLE ((volatile fsdev_btable_t *)(FSDEV_PMA_BASE + FSDEV_PMA_STRIDE * (FSDEV_BTABLE_BASE))) typedef struct { volatile pma_access_scheme fsdev_bus_t value; } fsdev_pma_buf_t; -#define PMA_BUF_AT(_addr) ((fsdev_pma_buf_t*) (FSDEV_PMA_BASE + FSDEV_PMA_STRIDE*(_addr))) +#define PMA_BUF_AT(_addr) ((fsdev_pma_buf_t *)(FSDEV_PMA_BASE + FSDEV_PMA_STRIDE * (_addr))) //--------------------------------------------------------------------+ // Registers Typedef //--------------------------------------------------------------------+ // volatile 32-bit aligned -#define _va32 volatile TU_ATTR_ALIGNED(4) +#define _va32 volatile TU_ATTR_ALIGNED(4) typedef struct { struct { _va32 fsdev_bus_t reg; - }ep[FSDEV_EP_COUNT]; - - _va32 uint32_t RESERVED7[8]; // Reserved - _va32 fsdev_bus_t CNTR; // 40: Control register - _va32 fsdev_bus_t ISTR; // 44: Interrupt status register - _va32 fsdev_bus_t FNR; // 48: Frame number register - _va32 fsdev_bus_t DADDR; // 4C: Device address register - _va32 fsdev_bus_t BTABLE; // 50: Buffer Table address register (16-bit only) - _va32 fsdev_bus_t LPMCSR; // 54: LPM Control and Status Register (32-bit only) - _va32 fsdev_bus_t BCDR; // 58: Battery Charging Detector Register (32-bit only) + } ep[FSDEV_EP_COUNT]; + + _va32 uint32_t RESERVED7[8]; // Reserved + _va32 fsdev_bus_t CNTR; // 40: Control register + _va32 fsdev_bus_t ISTR; // 44: Interrupt status register + _va32 fsdev_bus_t FNR; // 48: Frame number register + _va32 fsdev_bus_t DADDR; // 4C: Device address register + _va32 fsdev_bus_t BTABLE; // 50: Buffer Table address register (16-bit only) + _va32 fsdev_bus_t LPMCSR; // 54: LPM Control and Status Register (32-bit only) + _va32 fsdev_bus_t BCDR; // 58: Battery Charging Detector Register (32-bit only) } fsdev_regs_t; TU_VERIFY_STATIC(offsetof(fsdev_regs_t, CNTR) == 0x40, "Wrong offset"); TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); -#define FSDEV_REG ((fsdev_regs_t*) FSDEV_REG_BASE) +#define FSDEV_REG ((fsdev_regs_t *)FSDEV_REG_BASE) #ifndef USB_EPTX_STAT -#define USB_EPTX_STAT 0x0030U + #define USB_EPTX_STAT 0x0030U #endif #ifndef USB_EPRX_STAT -#define USB_EPRX_STAT 0x3000U + #define USB_EPRX_STAT 0x3000U #endif #ifndef USB_EPTX_STAT_Pos -#define USB_EPTX_STAT_Pos 4u + #define USB_EPTX_STAT_Pos 4u #endif #ifndef USB_EP_DTOG_TX_Pos -#define USB_EP_DTOG_TX_Pos 6u + #define USB_EP_DTOG_TX_Pos 6u #endif #ifndef USB_EP_CTR_TX_Pos -#define USB_EP_CTR_TX_Pos 7u + #define USB_EP_CTR_TX_Pos 7u #endif typedef enum { EP_STAT_DISABLED = 0, - EP_STAT_STALL = 1, - EP_STAT_NAK = 2, - EP_STAT_VALID = 3 -}ep_stat_t; + EP_STAT_STALL = 1, + EP_STAT_NAK = 2, + EP_STAT_VALID = 3 +} ep_stat_t; -#define EP_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) -#define EP_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) +#define EP_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) +#define EP_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) -#define CH_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) -#define CH_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) +#define CH_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) +#define CH_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 8 : 0))) //--------------------------------------------------------------------+ // Endpoint Helper @@ -211,7 +207,7 @@ TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value fsdev_int_disable(0); } - FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; + FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t)value; if (need_exclusive) { fsdev_int_enable(0); @@ -226,11 +222,11 @@ TU_ATTR_ALWAYS_INLINE static inline void ep_write_clear_ctr(uint32_t ep_id, tusb ep_write(ep_id, reg, false); } -TU_ATTR_ALWAYS_INLINE static inline void ep_change_status(uint32_t* reg, tusb_dir_t dir, ep_stat_t state) { +TU_ATTR_ALWAYS_INLINE static inline void ep_change_status(uint32_t *reg, tusb_dir_t dir, ep_stat_t state) { *reg ^= (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); } -TU_ATTR_ALWAYS_INLINE static inline void ep_change_dtog(uint32_t* reg, tusb_dir_t dir, uint8_t state) { +TU_ATTR_ALWAYS_INLINE static inline void ep_change_dtog(uint32_t *reg, tusb_dir_t dir, uint8_t state) { *reg ^= (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); } @@ -259,11 +255,11 @@ TU_ATTR_ALWAYS_INLINE static inline void ch_write_clear_ctr(uint32_t ch_id, tusb ep_write(ch_id, reg, false); } -TU_ATTR_ALWAYS_INLINE static inline void ch_change_status(uint32_t* reg, tusb_dir_t dir, ep_stat_t state) { +TU_ATTR_ALWAYS_INLINE static inline void ch_change_status(uint32_t *reg, tusb_dir_t dir, ep_stat_t state) { *reg ^= (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); } -TU_ATTR_ALWAYS_INLINE static inline void ch_change_dtog(uint32_t* reg, tusb_dir_t dir, uint8_t state) { +TU_ATTR_ALWAYS_INLINE static inline void ch_change_dtog(uint32_t *reg, tusb_dir_t dir, uint8_t state) { *reg ^= (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 8 : 0))); } @@ -281,8 +277,8 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uin TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t buf_id, uint16_t addr) { #ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; #else FSDEV_BTABLE->ep16[ep_id][buf_id].addr = addr; @@ -301,12 +297,12 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t btable_get_count(uint32_t ep_id, ui TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t buf_id, uint16_t byte_count) { #ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; #else - uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][buf_id].count; - cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); + uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][buf_id].count; + cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); FSDEV_BTABLE->ep16[ep_id][buf_id].count = cnt; #endif } @@ -318,7 +314,7 @@ void fsdev_core_reset(void); void fsdev_deinit(void); // Aligned buffer size according to hardware -uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block); +uint16_t pma_align_buffer_size(uint16_t size, uint8_t *blsize, uint8_t *num_block); // Set RX buffer size void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint16_t wCount); diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index 85ca88f1c..02dba05a6 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -281,7 +281,7 @@ // - Enable double buffering on devices with >1KB Packet Memory Area (PMA) // to improve isochronous transfer reliability and performance // - Disable on devices with limited PMA to conserve memory space - #if FSDEV_PMA_SIZE > 1024u + #if CFG_TUSB_FSDEV_PMA_SIZE > 1024u #define CFG_TUD_FSDEV_DOUBLE_BUFFERED_ISO_EP 1 #else #define CFG_TUD_FSDEV_DOUBLE_BUFFERED_ISO_EP 0 diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index f232f7d94..acdeccf6d 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -741,7 +741,7 @@ static uint32_t hcd_pma_alloc(uint8_t channel, tusb_dir_t dir, uint16_t len) { uint16_t addr = FSDEV_BTABLE_BASE + 8 * FSDEV_EP_COUNT; addr += channel * TUSB_EPSIZE_BULK_FS * 2 + (dir == TUSB_DIR_IN ? TUSB_EPSIZE_BULK_FS : 0); - TU_ASSERT(addr <= FSDEV_PMA_SIZE, 0xFFFF); + TU_ASSERT(addr <= CFG_TUSB_FSDEV_PMA_SIZE, 0xFFFF); return addr; } diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 570b1c14c..c40703b09 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -856,8 +856,7 @@ static void handle_rxflvl_irq(uint8_t rhport) { hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; if (byte_count > 0) { - const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; - tu_hwfifo_read(dwc2->fifo[0], edpt->buffer + xfer->xferred_bytes, byte_count, &access_mode); + tu_hwfifo_read(dwc2->fifo[0], edpt->buffer + xfer->xferred_bytes, byte_count, NULL); xfer->xferred_bytes += byte_count; xfer->fifo_bytes = byte_count; } @@ -908,8 +907,7 @@ static bool handle_txfifo_empty(dwc2_regs_t* dwc2, bool is_periodic) { return true; } - const tu_hwfifo_access_t access_mode = {.data_stride = CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE}; - tu_hwfifo_write(dwc2->fifo[ch_id], edpt->buffer + xfer->fifo_bytes, xact_bytes, &access_mode); + tu_hwfifo_write(dwc2->fifo[ch_id], edpt->buffer + xfer->fifo_bytes, xact_bytes, NULL); xfer->fifo_bytes += xact_bytes; } } diff --git a/src/tusb_option.h b/src/tusb_option.h index 87aba6a6c..5135ff05b 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -351,13 +351,13 @@ #if defined(TUP_USBIP_FSDEV) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #if FSDEV_PMA_SIZE == 512 + #if CFG_TUSB_FSDEV_PMA_SIZE == 512 #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase - #elif FSDEV_PMA_SIZE == 1024 + #elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 2 // 16-bit address increase - #elif FSDEV_PMA_SIZE == 2048 + #elif CFG_TUSB_FSDEV_PMA_SIZE == 2048 #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase #endif -- cgit v1.3.1 From 2026391b171017a6f07bd0bdfaaa2bcd49a08e34 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Tue, 6 Jan 2026 01:10:39 +0700 Subject: fix typo Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- src/common/tusb_fifo.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 5515ffb91..11e1a6069 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -119,7 +119,7 @@ extern "C" { typedef struct { uint8_t *buffer; // buffer pointer uint16_t depth; // max items - bool overwritable; // ovwerwritable when full + bool overwritable; // overwritable when full // 1 byte padding here volatile uint16_t wr_idx; // write index TODO maybe can drop volatile @@ -229,7 +229,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_write_n(tu_fifo_t *f, const // Hardware FIFO API // Special hardware FIFO/Buffer to hold USB data, usually requires certain access method these can be configured with // CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (data width) and CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE (address increment) -// Note: these usually has opposiite direction (read/write) to/from our software FIFO (tu_fifo_t) +// Note: these usually has opposite direction (read/write) to/from our software FIFO (tu_fifo_t) //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_hwfifo_write_from_fifo(volatile void *hwfifo, tu_fifo_t *f, uint16_t n, const tu_hwfifo_access_t *access_mode) { -- cgit v1.3.1 From 9de3e108b4d38677c5352786ef038600550598d3 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Tue, 6 Jan 2026 01:11:13 +0700 Subject: fix more typo Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- src/common/tusb_fifo.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 11e1a6069..86ba59059 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -157,7 +157,7 @@ typedef struct { // Moving data from tusb_fifo <-> USB hardware FIFOs e.g. STM32s need to use a special stride mode which reads/writes // data in 2/4 byte chunks from/to a fixed address (USB FIFO register) instead of incrementing the address. For this use -// read/write access_mode with stride_mode = true. The STRIPE DATA and ADDR stride must be configured with +// read/write access_mode with stride_mode = true. The STRIDE DATA and ADDR stride must be configured with // CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE and CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE //--------------------------------------------------------------------+ -- cgit v1.3.1 From e5c53f02c5f1e7a5ffae7d66c702e54e88bf8f71 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 6 Jan 2026 11:09:22 +0700 Subject: minor update --- .idea/cmake.xml | 3 +++ .idea/debugServers/ST_LINK.xml | 4 ++-- test/hil/tinyusb.json | 1 - 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 0754253ad..cc73ca8fc 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -103,6 +103,8 @@ + + @@ -126,6 +128,7 @@ + diff --git a/.idea/debugServers/ST_LINK.xml b/.idea/debugServers/ST_LINK.xml index 7c21d3879..c4dadd5bb 100644 --- a/.idea/debugServers/ST_LINK.xml +++ b/.idea/debugServers/ST_LINK.xml @@ -1,10 +1,10 @@ - + - + diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 047d0879c..7cb561b2d 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -107,7 +107,6 @@ "host": false, "dual": false }, - "comment": "MSC is slow to enumerated #2602", "flasher": { "name": "jlink", "uid": "000831174392", -- cgit v1.3.1 From 3302c07d129e8a6c2631a9b15d5a3549b455a3ea Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 28 Nov 2025 15:37:57 +0100 Subject: dwc2: implement deinit Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/dcd_dwc2.c | 12 ++++++++++++ src/portable/synopsys/dwc2/dwc2_common.c | 13 +++++++++++++ src/portable/synopsys/dwc2/dwc2_common.h | 1 + src/portable/synopsys/dwc2/hcd_dwc2.c | 10 ++++++++++ 4 files changed, 36 insertions(+) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 44f7137f9..57dcb6fba 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -491,6 +491,18 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { return true; } +bool dcd_deinit(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + // Disable global interrupt + dwc2->gahbcfg &= ~GAHBCFG_GINT; + + dcd_disconnect(rhport); + + dwc2_core_deinit(rhport); + return true; +} + void dcd_int_enable(uint8_t rhport) { dwc2_dcd_int_enable(rhport); } diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index a7e6188df..ce38ed6ec 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -251,6 +251,19 @@ bool dwc2_core_init(uint8_t rhport, bool is_highspeed, bool is_dma) { return true; } +void dwc2_core_deinit(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + // Soft disconnect + dwc2->dctl |= DCTL_SDIS; + + // Reset global registers + dwc2->gotgctl = 0; + + // Reset core + reset_core(dwc2); +} + // void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr) { // (void) in_isr; // dwc2_regs_t * const dwc2 = DWC2_REG(rhport); diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index 428304ba9..af532dc5e 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -86,6 +86,7 @@ TU_ATTR_ALWAYS_INLINE static inline dwc2_regs_t* DWC2_REG(uint8_t rhport) { bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role); bool dwc2_core_init(uint8_t rhport, bool is_highspeed, bool is_dma); +void dwc2_core_deinit(uint8_t rhport); void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr); //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index c40703b09..fc27b3f55 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -445,6 +445,16 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { return true; } +bool hcd_deinit(uint8_t rhport) { + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + // Disable global interrupt + dwc2->gahbcfg &= ~GAHBCFG_GINT; + + dwc2_core_deinit(rhport); + return true; +} + // Enable USB interrupt void hcd_int_enable (uint8_t rhport) { dwc2_int_set(rhport, TUSB_ROLE_HOST, true); -- cgit v1.3.1 From 5b49139e779516a66616054398f9738bccaf981b Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 28 Nov 2025 15:39:10 +0100 Subject: catch deinit error Signed-off-by: HiFiPhile --- src/device/usbd.c | 2 +- src/host/usbh.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/device/usbd.c b/src/device/usbd.c index 1e21c667a..9cfc2cc59 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -585,7 +585,7 @@ bool tud_deinit(uint8_t rhport) { // Deinit device controller driver dcd_int_disable(rhport); dcd_disconnect(rhport); - TU_VERIFY(dcd_deinit(rhport)); + TU_ASSERT(dcd_deinit(rhport)); // Deinit class drivers for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { diff --git a/src/host/usbh.c b/src/host/usbh.c index a725b7c8b..da6afdddb 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -538,7 +538,7 @@ bool tuh_deinit(uint8_t rhport) { // deinit host controller hcd_int_disable(rhport); - hcd_deinit(rhport); + TU_ASSERT(hcd_deinit(rhport)); _usbh_data.controller_id = TUSB_INDEX_INVALID_8; // remove all devices on this rhport (hub_addr = 0, hub_port = 0) -- cgit v1.3.1 From 104cf33239eda282b34c1f7971fbfc8e310eabf8 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 29 Nov 2025 16:07:41 +0100 Subject: hcd/dwc2: disable ID change interrupt due to stuck on stm32f7 Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index fc27b3f55..9d58dd4a3 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -435,7 +435,7 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dwc2->hprt = HPRT_POWER; // turn on VBUS // Enable required interrupts - dwc2->gintmsk |= GINTSTS_OTGINT | GINTSTS_CONIDSTSCHNG | GINTSTS_HPRTINT | GINTSTS_HCINT | GINTSTS_DISCINT; + dwc2->gintmsk |= GINTSTS_OTGINT | GINTSTS_HPRTINT | GINTSTS_HCINT | GINTSTS_DISCINT; // NPTX can hold at least 2 packet, change interrupt level to half-empty uint32_t gahbcfg = dwc2->gahbcfg & ~GAHBCFG_TX_FIFO_EPMTY_LVL; @@ -1448,16 +1448,6 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { // TU_LOG1_HEX(gintsts); - if (gintsts & GINTSTS_CONIDSTSCHNG) { - // Connector ID status change - dwc2->gintsts = GINTSTS_CONIDSTSCHNG; - - //if (dwc2->gotgctl) - // dwc2->hprt = HPRT_POWER; // power on port to turn on VBUS - //dwc2->gintmsk |= GINTMSK_PRTIM; - // TODO wait for SRP if OTG - } - if (gintsts & GINTSTS_SOF) { const bool more_sof = handle_sof_irq(rhport, in_isr); if (!more_sof) { -- cgit v1.3.1 From 4914ae83e516f9f81f75f5d0dc461904b6fcd551 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 28 Nov 2025 22:05:02 +0100 Subject: hcd/dwc2: retry transfer on data toggle error Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 9d58dd4a3..fb075582f 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -879,7 +879,7 @@ static void handle_rxflvl_irq(uint8_t rhport) { break; case GRXSTS_PKTSTS_HOST_DATATOGGLE_ERR: - TU_ASSERT(0, ); // maybe try to change DToggle + // handle in channel interrupt break; case GRXSTS_PKTSTS_HOST_CHANNEL_HALTED: @@ -1019,8 +1019,11 @@ static bool handle_channel_in_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t h channel_xfer_in_retry(dwc2, ch_id, hcint); } } else if (hcint & HCINT_DATATOGGLE_ERR) { + channel->hcintmsk &= ~HCINT_DATATOGGLE_ERR; xfer->err_count = 0; - TU_ASSERT(false); + hcsplt.split_compl = 0; // restart with start-split + channel->hcsplt = hcsplt.value; + channel_disable(dwc2, channel); } else { // nothing to do } -- cgit v1.3.1 From bbe1be349a3011da3839906d6b90110e140ddbe1 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 15 Dec 2025 22:19:35 +0100 Subject: hcd/stm32_fsdev: fix init after device mode Signed-off-by: HiFiPhile --- src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c index acdeccf6d..1813ef70b 100644 --- a/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c @@ -223,9 +223,13 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_memclr(&_hcd_data, sizeof(_hcd_data)); + // Clear pending interrupts + // Normally no interrupts should be pending here since we just reset the core, + // but device mode suspend needs to cleared by WKUP flag + FSDEV_REG->ISTR = 0; + // Enable interrupts for host mode - FSDEV_REG->CNTR |= USB_CNTR_RESETM | USB_CNTR_CTRM | USB_CNTR_SOFM | USB_CNTR_SUSPM | - USB_CNTR_WKUPM | USB_CNTR_ERRM | USB_CNTR_PMAOVRM; + FSDEV_REG->CNTR |= USB_CNTR_DCON | USB_CNTR_CTRM | USB_CNTR_SOFM | USB_CNTR_ERRM | USB_CNTR_PMAOVRM; // Initialize port state _hcd_data.connected = false; -- cgit v1.3.1 From a124edf9f6d008074f838c6daaed7c0502569ab7 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 7 Jan 2026 09:58:23 +0700 Subject: refactor remove endpoint_control/buffer_control from hw_endpoint_t --- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 49 ++++++++------- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 33 +++++------ src/portable/raspberrypi/rp2040/rp2040_usb.c | 29 ++++----- src/portable/raspberrypi/rp2040/rp2040_usb.h | 89 +++++++++++++++++++++------- 4 files changed, 123 insertions(+), 77 deletions(-) diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 15852f29f..31683502a 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -55,14 +55,14 @@ static struct hw_endpoint hw_endpoints[USB_MAX_ENDPOINTS][2]; // SOF may be used by remote wakeup as RESUME, this indicate whether SOF is actually used by usbd static bool _sof_enable = false; -TU_ATTR_ALWAYS_INLINE static inline struct hw_endpoint* hw_endpoint_get_by_num(uint8_t num, tusb_dir_t dir) { +TU_ATTR_ALWAYS_INLINE static inline struct hw_endpoint *hw_endpoint_get(uint8_t num, tusb_dir_t dir) { return &hw_endpoints[num][dir]; } TU_ATTR_ALWAYS_INLINE static inline struct hw_endpoint* hw_endpoint_get_by_addr(uint8_t ep_addr) { uint8_t num = tu_edpt_number(ep_addr); tusb_dir_t dir = tu_edpt_dir(ep_addr); - return hw_endpoint_get_by_num(num, dir); + return hw_endpoint_get(num, dir); } // Allocate from the USB buffer space (max 3840 bytes) @@ -86,15 +86,14 @@ static void hw_endpoint_alloc(struct hw_endpoint* ep, size_t size) { // Enable endpoint TU_ATTR_ALWAYS_INLINE static inline void hw_endpoint_enable(struct hw_endpoint* ep) { uint32_t const reg = EP_CTRL_ENABLE_BITS | ((uint) ep->transfer_type << EP_CTRL_BUFFER_TYPE_LSB) | hw_data_offset(ep->hw_data_buf); - *ep->endpoint_control = reg; + *hwep_ctrl_reg(ep) = reg; } // main processing for dcd_edpt_iso_activate static void hw_endpoint_init(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type) { - struct hw_endpoint* ep = hw_endpoint_get_by_addr(ep_addr); - const uint8_t num = tu_edpt_number(ep_addr); const tusb_dir_t dir = tu_edpt_dir(ep_addr); + hw_endpoint_t* ep = hw_endpoint_get(num, dir); ep->ep_addr = ep_addr; @@ -106,28 +105,28 @@ static void hw_endpoint_init(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t t ep->transfer_type = transfer_type; // Every endpoint has a buffer control register in dpram - if (dir == TUSB_DIR_IN) { - ep->buffer_control = &usb_dpram->ep_buf_ctrl[num].in; - } else { - ep->buffer_control = &usb_dpram->ep_buf_ctrl[num].out; - } + // if (dir == TUSB_DIR_IN) { + // ep->buffer_control = &usb_dpram->ep_buf_ctrl[num].in; + // } else { + // ep->buffer_control = &usb_dpram->ep_buf_ctrl[num].out; + // } // Clear existing buffer control state - *ep->buffer_control = 0; + *hwep_buf_ctrl_reg(ep) = 0; if (num == 0) { // EP0 has no endpoint control register because the buffer offsets are fixed - ep->endpoint_control = NULL; + // ep->endpoint_control = NULL; // Buffer offset is fixed (also double buffered) ep->hw_data_buf = (uint8_t*) &usb_dpram->ep0_buf_a[0]; } else { // Set the endpoint control register (starts at EP1, hence num-1) - if (dir == TUSB_DIR_IN) { - ep->endpoint_control = &usb_dpram->ep_ctrl[num - 1].in; - } else { - ep->endpoint_control = &usb_dpram->ep_ctrl[num - 1].out; - } + // if (dir == TUSB_DIR_IN) { + // ep->endpoint_control = &usb_dpram->ep_ctrl[num - 1].in; + // } else { + // ep->endpoint_control = &usb_dpram->ep_ctrl[num - 1].out; + // } } } @@ -165,7 +164,7 @@ static void hw_endpoint_abort_xfer(struct hw_endpoint* ep) { buf_ctrl |= USB_BUF_CTRL_DATA1_PID; } - _hw_endpoint_buffer_control_set_value32(ep, buf_ctrl); + hwep_buf_ctrl_set(ep, buf_ctrl); hw_endpoint_reset_transfer(ep); if (rp2040_chip_version() >= 2) { @@ -184,7 +183,7 @@ static void __tusb_irq_path_func(hw_handle_buff_status)(void) { usb_hw_clear->buf_status = bit; // IN transfer for even i, OUT transfer for odd i - struct hw_endpoint* ep = hw_endpoint_get_by_num(i >> 1u, (i & 1u) ? TUSB_DIR_OUT : TUSB_DIR_IN); + struct hw_endpoint *ep = hw_endpoint_get(i >> 1u, (i & 1u) ? TUSB_DIR_OUT : TUSB_DIR_IN); // Continue xfer bool done = hw_endpoint_xfer_continue(ep); @@ -204,7 +203,7 @@ TU_ATTR_ALWAYS_INLINE static inline void reset_ep0(void) { // If we have finished this transfer on EP0 set pid back to 1 for next // setup transfer. Also clear a stall in case for (uint8_t dir = 0; dir < 2; dir++) { - struct hw_endpoint* ep = hw_endpoint_get_by_num(0, dir); + struct hw_endpoint *ep = hw_endpoint_get(0, dir); ep->next_pid = 1u; if (ep->active) { hw_endpoint_abort_xfer(ep); // Abort any pending transfer per USB specs @@ -240,7 +239,7 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { e15_last_sof = time_us_32(); for (uint8_t i = 0; i < USB_MAX_ENDPOINTS; i++) { - struct hw_endpoint* ep = hw_endpoint_get_by_num(i, TUSB_DIR_IN); + struct hw_endpoint *ep = hw_endpoint_get(i, TUSB_DIR_IN); // Active Bulk IN endpoint requires SOF if ((ep->transfer_type == TUSB_XFER_BULK) && ep->active) { @@ -369,9 +368,9 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { TU_LOG(2, "Chip Version B%u\r\n", rp2040_chip_version()); // Reset hardware to default state - rp2040_usb_init(); + rp2usb_init(); -#if FORCE_VBUS_DETECT + #if FORCE_VBUS_DETECT // Force VBUS detect so the device thinks it is plugged into a host usb_hw->pwr = USB_USB_PWR_VBUS_DETECT_BITS | USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_BITS; #endif @@ -546,7 +545,7 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { // stall and clear current pending buffer // may need to use EP_ABORT - _hw_endpoint_buffer_control_set_value32(ep, USB_BUF_CTRL_STALL); + hwep_buf_ctrl_set(ep, USB_BUF_CTRL_STALL); } void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { @@ -557,7 +556,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { // clear stall also reset toggle to DATA0, ready for next transfer ep->next_pid = 0; - _hw_endpoint_buffer_control_clear_mask32(ep, USB_BUF_CTRL_STALL); + hwep_buf_ctrl_clear_mask(ep, USB_BUF_CTRL_STALL); } } diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index cd8c905d5..12a2f2d25 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -122,7 +122,7 @@ static void __tusb_irq_path_func(hw_handle_buff_status)(void) remaining_buffers &= ~bit; struct hw_endpoint * ep = &epx; - uint32_t ep_ctrl = *ep->endpoint_control; + uint32_t ep_ctrl = *hwep_ctrl_reg(ep); if ( ep_ctrl & EP_CTRL_DOUBLE_BUFFERED_BITS ) { TU_LOG(3, "Double Buffered: "); @@ -240,9 +240,8 @@ static void __tusb_irq_path_func(hcd_rp2040_irq)(void) if ( status & USB_INTS_ERROR_DATA_SEQ_BITS ) { usb_hw_clear->sie_status = USB_SIE_STATUS_DATA_SEQ_ERROR_BITS; - TU_LOG(3, " Seq Error: [0] = 0x%04u [1] = 0x%04x\r\n", - tu_u32_low16(*epx.buffer_control), - tu_u32_high16(*epx.buffer_control)); + TU_LOG(3, " Seq Error: [0] = 0x%04u [1] = 0x%04x\r\n", tu_u32_low16(*hw_endpoint_get_buf_ctrl(&epx)), + tu_u32_high16(*hw_endpoint_get_buf_ctrl(&epx))); panic("Data Seq Error \n"); } @@ -285,8 +284,8 @@ static struct hw_endpoint *_hw_endpoint_allocate(uint8_t transfer_type) ep = _next_free_interrupt_ep(); pico_info("Allocate %s ep %d\n", tu_edpt_type_str(transfer_type), ep->interrupt_num); assert(ep); - ep->buffer_control = &usbh_dpram->int_ep_buffer_ctrl[ep->interrupt_num].ctrl; - ep->endpoint_control = &usbh_dpram->int_ep_ctrl[ep->interrupt_num].ctrl; + // ep->buffer_control = &usbh_dpram->int_ep_buffer_ctrl[ep->interrupt_num].ctrl; + // ep->endpoint_control = &usbh_dpram->int_ep_ctrl[ep->interrupt_num].ctrl; // 0 for epx (double buffered): TODO increase to 1024 for ISO // 2x64 for intep0 // 3x64 for intep1 @@ -296,8 +295,8 @@ static struct hw_endpoint *_hw_endpoint_allocate(uint8_t transfer_type) else { ep = &epx; - ep->buffer_control = &usbh_dpram->epx_buf_ctrl; - ep->endpoint_control = &usbh_dpram->epx_ctrl; + // ep->buffer_control = &usbh_dpram->epx_buf_ctrl; + // ep->endpoint_control = &usbh_dpram->epx_ctrl; ep->hw_data_buf = &usbh_dpram->epx_data[0]; } @@ -307,8 +306,8 @@ static struct hw_endpoint *_hw_endpoint_allocate(uint8_t transfer_type) static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type, uint8_t bmInterval) { // Already has data buffer, endpoint control, and buffer control allocated at this point - assert(ep->endpoint_control); - assert(ep->buffer_control); + // assert(ep->endpoint_control); + // assert(ep->buffer_control); assert(ep->hw_data_buf); uint8_t const num = tu_edpt_number(ep_addr); @@ -340,8 +339,8 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t { ep_reg |= (uint32_t) ((bmInterval - 1) << EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB); } - *ep->endpoint_control = ep_reg; - pico_trace("endpoint control (0x%p) <- 0x%lx\n", ep->endpoint_control, ep_reg); + *hwep_ctrl_reg(ep) = ep_reg; + // pico_trace("endpoint control (0x%p) <- 0x%lx\n", ep->endpoint_control, ep_reg); ep->configured = true; if ( ep != &epx ) @@ -382,7 +381,7 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { assert(rhport == 0); // Reset any previous state - rp2040_usb_init(); + rp2usb_init(); // Force VBUS detect to always present, for now we assume vbus is always provided (without using VBUS En) usb_hw->pwr = USB_USB_PWR_VBUS_DETECT_BITS | USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_BITS; @@ -466,8 +465,8 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { // reset epx if it is currently active with unplugged device if (epx.configured && epx.active && epx.dev_addr == dev_addr) { epx.configured = false; - *epx.endpoint_control = 0; - *epx.buffer_control = 0; + *hwep_ctrl_reg(&epx) = 0; + *hwep_buf_ctrl_reg(&epx) = 0; hw_endpoint_reset_transfer(&epx); } @@ -482,8 +481,8 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { // unconfigure the endpoint ep->configured = false; - *ep->endpoint_control = 0; - *ep->buffer_control = 0; + *hwep_ctrl_reg(ep) = 0; + *hwep_buf_ctrl_reg(ep) = 0; hw_endpoint_reset_transfer(ep); } } diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 9d0bd762d..61f978b0d 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -62,7 +62,7 @@ static void unaligned_memcpy(void *dst, const void *src, size_t n) { } } -void rp2040_usb_init(void) { +void rp2usb_init(void) { // Reset usb controller reset_block(RESETS_RESET_USBCTRL_BITS); unreset_block_wait(RESETS_RESET_USBCTRL_BITS); @@ -93,21 +93,21 @@ void __tusb_irq_path_func(hw_endpoint_reset_transfer)(struct hw_endpoint* ep) { ep->user_buf = 0; } -void __tusb_irq_path_func(_hw_endpoint_buffer_control_update32)(struct hw_endpoint* ep, uint32_t and_mask, - uint32_t or_mask) { +void __tusb_irq_path_func(hwep_buf_ctrl_update)(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask) { uint32_t value = 0; + io_rw_32 *buf_ctrl = hwep_buf_ctrl_reg(ep); if (and_mask) { - value = *ep->buffer_control & and_mask; + value = *buf_ctrl & and_mask; } if (or_mask) { value |= or_mask; if (or_mask & USB_BUF_CTRL_AVAIL) { - if (*ep->buffer_control & USB_BUF_CTRL_AVAIL) { + if (*buf_ctrl & USB_BUF_CTRL_AVAIL) { panic("ep %02X was already available", ep->ep_addr); } - *ep->buffer_control = value & ~USB_BUF_CTRL_AVAIL; + *buf_ctrl = value & ~USB_BUF_CTRL_AVAIL; // 4.1.2.5.1 Con-current access: 12 cycles (should be good for 48*12Mhz = 576Mhz) after write to buffer control // Don't need delay in host mode as host is in charge if (!is_host_mode()) { @@ -116,7 +116,7 @@ void __tusb_irq_path_func(_hw_endpoint_buffer_control_update32)(struct hw_endpoi } } - *ep->buffer_control = value; + *buf_ctrl = value; } // prepare buffer, return buffer control @@ -153,7 +153,8 @@ static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint* ep, // Prepare buffer control register value void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) { - uint32_t ep_ctrl = *ep->endpoint_control; + io_rw_32 *ep_ctrl_reg = hwep_ctrl_reg(ep); + uint32_t ep_ctrl = *ep_ctrl_reg; // always compute and start with buffer 0 uint32_t buf_ctrl = prepare_ep_buffer(ep, 0) | USB_BUF_CTRL_SEL; @@ -182,13 +183,13 @@ void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) ep_ctrl |= EP_CTRL_INTERRUPT_PER_BUFFER; } - *ep->endpoint_control = ep_ctrl; + *ep_ctrl_reg = ep_ctrl; TU_LOG(3, " Prepare BufCtrl: [0] = 0x%04x [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl)); // Finally, write to buffer_control which will trigger the transfer // the next time the controller polls this dpram address - _hw_endpoint_buffer_control_set_value32(ep, buf_ctrl); + hwep_buf_ctrl_set(ep, buf_ctrl); } void hw_endpoint_xfer_start(struct hw_endpoint* ep, uint8_t* buffer, uint16_t total_len) { @@ -221,7 +222,7 @@ void hw_endpoint_xfer_start(struct hw_endpoint* ep, uint8_t* buffer, uint16_t to // sync endpoint buffer and return transferred bytes static uint16_t __tusb_irq_path_func(sync_ep_buffer)(struct hw_endpoint* ep, uint8_t buf_id) { - uint32_t buf_ctrl = _hw_endpoint_buffer_control_get_value32(ep); + uint32_t buf_ctrl = hwep_buf_ctrl_get(ep); if (buf_id) buf_ctrl = buf_ctrl >> 16; uint16_t xferred_bytes = buf_ctrl & USB_BUF_CTRL_LEN_MASK; @@ -256,14 +257,14 @@ static void __tusb_irq_path_func(_hw_endpoint_xfer_sync)(struct hw_endpoint* ep) // Update hw endpoint struct with info from hardware // after a buff status interrupt - uint32_t __unused buf_ctrl = _hw_endpoint_buffer_control_get_value32(ep); + uint32_t __unused buf_ctrl = hwep_buf_ctrl_get(ep); TU_LOG(3, " Sync BufCtrl: [0] = 0x%04x [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl)); // always sync buffer 0 uint16_t buf0_bytes = sync_ep_buffer(ep, 0); // sync buffer 1 if double buffered - if ((*ep->endpoint_control) & EP_CTRL_DOUBLE_BUFFERED_BITS) { + if ((*hwep_ctrl_reg(ep)) & EP_CTRL_DOUBLE_BUFFERED_BITS) { if (buf0_bytes == ep->wMaxPacketSize) { // sync buffer 1 if not short packet sync_ep_buffer(ep, 1); @@ -287,7 +288,7 @@ static void __tusb_irq_path_func(_hw_endpoint_xfer_sync)(struct hw_endpoint* ep) ep_ctrl &= ~(EP_CTRL_DOUBLE_BUFFERED_BITS | EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER); ep_ctrl |= EP_CTRL_INTERRUPT_PER_BUFFER; - _hw_endpoint_buffer_control_set_value32(ep, 0); + hwep_buf_ctrl_set(ep, 0); usb_hw->abort &= ~TU_BIT(ep_id); diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h index d4d29a816..603640c6d 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.h +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h @@ -56,10 +56,10 @@ typedef struct hw_endpoint uint8_t next_pid; // Endpoint control register - io_rw_32 *endpoint_control; + // io_rw_32 *endpoint_control; // Buffer control register - io_rw_32 *buffer_control; + // io_rw_32 *buffer_control; // Buffer pointer in usb dpram uint8_t *hw_data_buf; @@ -97,7 +97,12 @@ typedef struct hw_endpoint extern volatile uint32_t e15_last_sof; #endif -void rp2040_usb_init(void); +void rp2usb_init(void); + +// if usb hardware is in host mode +TU_ATTR_ALWAYS_INLINE static inline bool rp2usb_is_host_mode(void) { + return (usb_hw->main_ctrl & USB_MAIN_CTRL_HOST_NDEVICE_BITS) ? true : false; +} void hw_endpoint_xfer_start(struct hw_endpoint *ep, uint8_t *buffer, uint16_t total_len); bool hw_endpoint_xfer_continue(struct hw_endpoint *ep); @@ -110,34 +115,76 @@ TU_ATTR_ALWAYS_INLINE static inline void hw_endpoint_lock_update(__unused struct // sense to have worker and IRQ on same core, however I think using critsec is about equivalent. } -void _hw_endpoint_buffer_control_update32(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask); +TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_ctrl_reg(struct hw_endpoint *ep) { + (void)ep; +#if CFG_TUH_ENABLED + if (rp2usb_is_host_mode()) { + if (ep->transfer_type == TUSB_XFER_CONTROL) { + return &usbh_dpram->epx_ctrl; + } + return &usbh_dpram->int_ep_ctrl[ep->interrupt_num].ctrl; + } +#endif -TU_ATTR_ALWAYS_INLINE static inline uint32_t _hw_endpoint_buffer_control_get_value32 (struct hw_endpoint *ep) -{ - return *ep->buffer_control; +#if CFG_TUD_ENABLED + if (!rp2usb_is_host_mode()) { + const uint8_t num = tu_edpt_number(ep->ep_addr); + if (num == 0) { + return NULL; + } + return (tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN) ? &usb_dpram->ep_ctrl[num - 1].in + : &usb_dpram->ep_ctrl[num - 1].out; + } +#endif + + return NULL; } -TU_ATTR_ALWAYS_INLINE static inline void _hw_endpoint_buffer_control_set_value32 (struct hw_endpoint *ep, uint32_t value) -{ - _hw_endpoint_buffer_control_update32(ep, 0, value); +TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_buf_ctrl_reg(struct hw_endpoint *ep) { + (void)ep; +#if CFG_TUH_ENABLED + if (rp2usb_is_host_mode()) { + if (ep->transfer_type == TUSB_XFER_CONTROL) { + return &usbh_dpram->epx_buf_ctrl; + } + return &usbh_dpram->int_ep_buffer_ctrl[ep->interrupt_num].ctrl; + } +#endif + +#if CFG_TUD_ENABLED + if (!rp2usb_is_host_mode()) { + const uint8_t num = tu_edpt_number(ep->ep_addr); + return (tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN) ? &usb_dpram->ep_buf_ctrl[num].in + : &usb_dpram->ep_buf_ctrl[num].out; + } +#endif + return NULL; } -TU_ATTR_ALWAYS_INLINE static inline void _hw_endpoint_buffer_control_set_mask32 (struct hw_endpoint *ep, uint32_t value) -{ - _hw_endpoint_buffer_control_update32(ep, ~value, value); +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ +void hwep_buf_ctrl_update(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask); + +TU_ATTR_ALWAYS_INLINE static inline uint32_t hwep_buf_ctrl_get(struct hw_endpoint *ep) { + return *hwep_buf_ctrl_reg(ep); } -TU_ATTR_ALWAYS_INLINE static inline void _hw_endpoint_buffer_control_clear_mask32 (struct hw_endpoint *ep, uint32_t value) -{ - _hw_endpoint_buffer_control_update32(ep, ~value, 0); +TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_set(struct hw_endpoint *ep, uint32_t value) { + hwep_buf_ctrl_update(ep, 0, value); } -static inline uintptr_t hw_data_offset (uint8_t *buf) -{ - // Remove usb base from buffer pointer - return (uintptr_t) buf ^ (uintptr_t) usb_dpram; +TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_set_mask32(struct hw_endpoint *ep, uint32_t value) { + hwep_buf_ctrl_update(ep, ~value, value); +} + +TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_clear_mask(struct hw_endpoint *ep, uint32_t value) { + hwep_buf_ctrl_update(ep, ~value, 0); } -extern const char *ep_dir_string[]; +static inline uintptr_t hw_data_offset(uint8_t *buf) { + // Remove usb base from buffer pointer + return (uintptr_t)buf ^ (uintptr_t)usb_dpram; +} #endif -- cgit v1.3.1 From 475e97cc8b048e2ea0244f310657b8e02a5cfe73 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 7 Jan 2026 22:49:18 +0700 Subject: remove hw_endpoint_t rx, rename/change signature of helper functions --- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 205 ++++++++++++--------------- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 15 +- src/portable/raspberrypi/rp2040/rp2040_usb.c | 182 +++++++++++++++--------- src/portable/raspberrypi/rp2040/rp2040_usb.h | 69 ++++----- 4 files changed, 239 insertions(+), 232 deletions(-) diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 31683502a..6c74029d8 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -41,83 +41,49 @@ // Current implementation force vbus detection as always present, causing device think it is always plugged into host. // Therefore it cannot detect disconnect event, mistaken it as suspend. // Note: won't work if change to 0 (for now) -#define FORCE_VBUS_DETECT 1 +#define FORCE_VBUS_DETECT 1 + + #define USB_INTS_ERROR_BITS \ + (USB_INTS_ERROR_DATA_SEQ_BITS | USB_INTS_ERROR_BIT_STUFF_BITS | USB_INTS_ERROR_CRC_BITS | \ + USB_INTS_ERROR_RX_OVERFLOW_BITS | USB_INTS_ERROR_RX_TIMEOUT_BITS) /*------------------------------------------------------------------*/ /* Low level controller *------------------------------------------------------------------*/ -// Init these in dcd_init -static uint8_t* next_buffer_ptr; +// HW buffer pointer from USB buffer space (max 3840 bytes) +static uint8_t *hw_buffer_ptr; // USB_MAX_ENDPOINTS Endpoints, direction TUSB_DIR_OUT for out and TUSB_DIR_IN for in. static struct hw_endpoint hw_endpoints[USB_MAX_ENDPOINTS][2]; -// SOF may be used by remote wakeup as RESUME, this indicate whether SOF is actually used by usbd +// SOF may be used by remote wakeup as RESUME, this indicates whether SOF is actually used by usbd static bool _sof_enable = false; -TU_ATTR_ALWAYS_INLINE static inline struct hw_endpoint *hw_endpoint_get(uint8_t num, tusb_dir_t dir) { - return &hw_endpoints[num][dir]; +TU_ATTR_ALWAYS_INLINE static inline hw_endpoint_t *hw_endpoint_get(uint8_t epnum, tusb_dir_t dir) { + return &hw_endpoints[epnum][dir]; } -TU_ATTR_ALWAYS_INLINE static inline struct hw_endpoint* hw_endpoint_get_by_addr(uint8_t ep_addr) { - uint8_t num = tu_edpt_number(ep_addr); - tusb_dir_t dir = tu_edpt_dir(ep_addr); +TU_ATTR_ALWAYS_INLINE static inline hw_endpoint_t *hw_endpoint_get_by_addr(uint8_t ep_addr) { + const uint8_t num = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); return hw_endpoint_get(num, dir); } -// Allocate from the USB buffer space (max 3840 bytes) -static void hw_endpoint_alloc(struct hw_endpoint* ep, size_t size) { - // round up size to multiple of 64 - size = tu_round_up(ep->wMaxPacketSize, 64); - - // double buffered Bulk endpoint - if (ep->transfer_type == TUSB_XFER_BULK) { - size *= 2u; - } - - // assign buffer - ep->hw_data_buf = next_buffer_ptr; - next_buffer_ptr += size; - - hard_assert(next_buffer_ptr < usb_dpram->epx_data + sizeof(usb_dpram->epx_data)); - pico_info(" Allocated %d bytes (0x%p)\r\n", size, ep->hw_data_buf); -} - -// Enable endpoint -TU_ATTR_ALWAYS_INLINE static inline void hw_endpoint_enable(struct hw_endpoint* ep) { - uint32_t const reg = EP_CTRL_ENABLE_BITS | ((uint) ep->transfer_type << EP_CTRL_BUFFER_TYPE_LSB) | hw_data_offset(ep->hw_data_buf); - *hwep_ctrl_reg(ep) = reg; -} - // main processing for dcd_edpt_iso_activate -static void hw_endpoint_init(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type) { - const uint8_t num = tu_edpt_number(ep_addr); - const tusb_dir_t dir = tu_edpt_dir(ep_addr); - hw_endpoint_t* ep = hw_endpoint_get(num, dir); - - ep->ep_addr = ep_addr; - - // For device, IN is a tx transfer and OUT is an rx transfer - ep->rx = (dir == TUSB_DIR_OUT); +static void hw_endpoint_init(hw_endpoint_t *ep, uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type) { + const uint8_t epnum = tu_edpt_number(ep_addr); - ep->next_pid = 0u; + ep->ep_addr = ep_addr; + ep->next_pid = 0u; ep->wMaxPacketSize = wMaxPacketSize; - ep->transfer_type = transfer_type; - - // Every endpoint has a buffer control register in dpram - // if (dir == TUSB_DIR_IN) { - // ep->buffer_control = &usb_dpram->ep_buf_ctrl[num].in; - // } else { - // ep->buffer_control = &usb_dpram->ep_buf_ctrl[num].out; - // } + ep->transfer_type = transfer_type; // Clear existing buffer control state - *hwep_buf_ctrl_reg(ep) = 0; - - if (num == 0) { - // EP0 has no endpoint control register because the buffer offsets are fixed - // ep->endpoint_control = NULL; + io_rw_32 *buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); + *buf_ctrl_reg = 0; + // allocated hw buffer + if (epnum == 0) { // Buffer offset is fixed (also double buffered) ep->hw_data_buf = (uint8_t*) &usb_dpram->ep0_buf_a[0]; } else { @@ -127,33 +93,49 @@ static void hw_endpoint_init(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t t // } else { // ep->endpoint_control = &usb_dpram->ep_ctrl[num - 1].out; // } + + // round up size to multiple of 64 + uint16_t size = (uint16_t)tu_round_up(wMaxPacketSize, 64); + + // double buffered Bulk endpoint + if (transfer_type == TUSB_XFER_BULK) { + size *= 2u; + } + + // assign buffer + ep->hw_data_buf = hw_buffer_ptr; + hw_buffer_ptr += size; + + hard_assert(hw_buffer_ptr < usb_dpram->epx_data + sizeof(usb_dpram->epx_data)); + pico_info(" Allocated %d bytes (0x%p)\r\n", size, ep->hw_data_buf); } } // Init, allocate buffer and enable endpoint static void hw_endpoint_open(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type) { - struct hw_endpoint* ep = hw_endpoint_get_by_addr(ep_addr); - hw_endpoint_init(ep_addr, wMaxPacketSize, transfer_type); - const uint8_t num = tu_edpt_number(ep_addr); - if (num != 0) { - // EP0 is already enabled - hw_endpoint_alloc(ep, ep->wMaxPacketSize); - hw_endpoint_enable(ep); + const uint8_t epnum = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); + hw_endpoint_t *ep = hw_endpoint_get(epnum, dir); + + hw_endpoint_init(ep, ep_addr, wMaxPacketSize, transfer_type); + + // Set endpoint control register to enable (EP0 has no endpoint control register) + io_rw_32 *ctrl_reg = hwep_ctrl_reg_device(ep); + if (ctrl_reg != NULL) { + const uint32_t ctrl_value = + EP_CTRL_ENABLE_BITS | ((uint32_t)transfer_type << EP_CTRL_BUFFER_TYPE_LSB) | hw_data_offset(ep->hw_data_buf); + *ctrl_reg = ctrl_value; } } -static void hw_endpoint_xfer(uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { - struct hw_endpoint* ep = hw_endpoint_get_by_addr(ep_addr); - hw_endpoint_xfer_start(ep, buffer, total_bytes); -} - static void hw_endpoint_abort_xfer(struct hw_endpoint* ep) { // Abort any pending transfer // Due to Errata RP2040-E2: ABORT flag is only applicable for B2 and later (unusable for B0, B1). // Which means we are not guaranteed to safely abort pending transfer on B0 and B1. - const uint8_t dir = tu_edpt_dir(ep->ep_addr); + const uint8_t dir = (uint8_t)tu_edpt_dir(ep->ep_addr); const uint8_t epnum = tu_edpt_number(ep->ep_addr); const uint32_t abort_mask = TU_BIT((epnum << 1) | (dir ? 0 : 1)); + if (rp2040_chip_version() >= 2) { usb_hw_set->abort = abort_mask; while ((usb_hw->abort_done & abort_mask) != abort_mask) {} @@ -173,7 +155,7 @@ static void hw_endpoint_abort_xfer(struct hw_endpoint* ep) { } } -static void __tusb_irq_path_func(hw_handle_buff_status)(void) { +static void __tusb_irq_path_func(handle_hw_buff_status)(void) { uint32_t remaining_buffers = usb_hw->buf_status; pico_trace("buf_status = 0x%08lx\r\n", remaining_buffers); uint bit = 1u; @@ -183,12 +165,13 @@ static void __tusb_irq_path_func(hw_handle_buff_status)(void) { usb_hw_clear->buf_status = bit; // IN transfer for even i, OUT transfer for odd i - struct hw_endpoint *ep = hw_endpoint_get(i >> 1u, (i & 1u) ? TUSB_DIR_OUT : TUSB_DIR_IN); + const uint8_t epnum = i >> 1u; + const tusb_dir_t dir = (i & 1u) ? TUSB_DIR_OUT : TUSB_DIR_IN; + hw_endpoint_t *ep = hw_endpoint_get(epnum, dir); - // Continue xfer - bool done = hw_endpoint_xfer_continue(ep); + const bool done = hw_endpoint_xfer_continue(ep); if (done) { - // Notify + // Notify usbd const uint16_t xferred_len = ep->xferred_len; hw_endpoint_reset_transfer(ep); dcd_event_xfer_complete(0, ep->ep_addr, xferred_len, XFER_RESULT_SUCCESS, true); @@ -222,11 +205,11 @@ static void __tusb_irq_path_func(reset_non_control_endpoints)(void) { tu_memclr(hw_endpoints[1], sizeof(hw_endpoints) - 2 * sizeof(hw_endpoint_t)); // reclaim buffer space - next_buffer_ptr = &usb_dpram->epx_data[0]; + hw_buffer_ptr = &usb_dpram->epx_data[0]; } static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { - uint32_t const status = usb_hw->ints; + const uint32_t status = usb_hw->ints; uint32_t handled = 0; if (status & USB_INTF_DEV_SOF_BITS) { @@ -259,7 +242,9 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { #endif // disable SOF interrupt if it is used for RESUME in remote wakeup - if (!keep_sof_alive && !_sof_enable) usb_hw_clear->inte = USB_INTS_DEV_SOF_BITS; + if (!keep_sof_alive && !_sof_enable) { + usb_hw_clear->inte = USB_INTS_DEV_SOF_BITS; + } dcd_event_sof(0, usb_hw->sof_rd & USB_SOF_RD_BITS, true); } @@ -268,7 +253,7 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { // before closing the EP, the events will be delivered in same order. if (status & USB_INTS_BUFF_STATUS_BITS) { handled |= USB_INTS_BUFF_STATUS_BITS; - hw_handle_buff_status(); + handle_hw_buff_status(); } if (status & USB_INTS_SETUP_REQ_BITS) { @@ -345,13 +330,6 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { } } -#define USB_INTS_ERROR_BITS ( \ - USB_INTS_ERROR_DATA_SEQ_BITS | \ - USB_INTS_ERROR_BIT_STUFF_BITS | \ - USB_INTS_ERROR_CRC_BITS | \ - USB_INTS_ERROR_RX_OVERFLOW_BITS | \ - USB_INTS_ERROR_RX_TIMEOUT_BITS) - /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ @@ -424,12 +402,11 @@ void dcd_int_disable(__unused uint8_t rhport) { irq_set_enabled(USBCTRL_IRQ, false); } -void dcd_set_address(__unused uint8_t rhport, __unused uint8_t dev_addr) { - assert(rhport == 0); - +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { + (void)dev_addr; // Can't set device address in hardware until status xfer has complete // Send 0len complete response on EP0 IN - hw_endpoint_xfer(0x80, NULL, 0); + dcd_edpt_xfer(rhport, 0x80, NULL, 0, false); } void dcd_remote_wakeup(__unused uint8_t rhport) { @@ -474,7 +451,6 @@ void dcd_sof_enable(uint8_t rhport, bool en) { /*------------------------------------------------------------------*/ /* DCD Endpoint port *------------------------------------------------------------------*/ - void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const* request) { (void) rhport; @@ -496,25 +472,32 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const* desc_edpt) { // New API: Allocate packet buffer used by ISO endpoints // Some MCU need manual packet buffer allocation, we allocate the largest size to avoid clustering bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { - (void) rhport; - struct hw_endpoint* ep = hw_endpoint_get_by_addr(ep_addr); - hw_endpoint_init(ep_addr, largest_packet_size, TUSB_XFER_ISOCHRONOUS); - hw_endpoint_alloc(ep, largest_packet_size); + (void)rhport; + struct hw_endpoint *ep = hw_endpoint_get_by_addr(ep_addr); + hw_endpoint_init(ep, ep_addr, largest_packet_size, TUSB_XFER_ISOCHRONOUS); return true; } // New API: Configure and enable an ISO endpoint according to descriptor -bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) { - (void) rhport; - struct hw_endpoint* ep = hw_endpoint_get_by_addr(ep_desc->bEndpointAddress); +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + (void)rhport; + const uint8_t epnum = tu_edpt_number(ep_desc->bEndpointAddress); + const tusb_dir_t dir = tu_edpt_dir(ep_desc->bEndpointAddress); + struct hw_endpoint *ep = hw_endpoint_get(epnum, dir); TU_ASSERT(ep->hw_data_buf != NULL); // must be inited and allocated previously if (ep->active) { hw_endpoint_abort_xfer(ep); // abort any pending transfer } - ep->wMaxPacketSize = ep_desc->wMaxPacketSize; - hw_endpoint_enable(ep); + + // Set control register to enable endpoint + io_rw_32 *ctrl_reg = hwep_ctrl_reg_device(ep); + if (ctrl_reg != NULL) { + const uint32_t ctrl_value = EP_CTRL_ENABLE_BITS | ((uint32_t)TUSB_XFER_ISOCHRONOUS << EP_CTRL_BUFFER_TYPE_LSB) | + hw_data_offset(ep->hw_data_buf); + *ctrl_reg = ctrl_value; + } return true; } @@ -525,26 +508,26 @@ void dcd_edpt_close_all(uint8_t rhport) { reset_non_control_endpoints(); } -bool dcd_edpt_xfer(__unused uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes, bool is_isr) { - (void) is_isr; - assert(rhport == 0); - hw_endpoint_xfer(ep_addr, buffer, total_bytes); +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes, bool is_isr) { + (void)rhport; + (void)is_isr; + hw_endpoint_t *ep = hw_endpoint_get_by_addr(ep_addr); + hw_endpoint_xfer_start(ep, buffer, total_bytes); return true; } void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; + (void)rhport; + const uint8_t epnum = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); + hw_endpoint_t *ep = hw_endpoint_get(epnum, dir); - if (tu_edpt_number(ep_addr) == 0) { + if (epnum == 0) { // A stall on EP0 has to be armed so it can be cleared on the next setup packet - usb_hw_set->ep_stall_arm = (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) ? USB_EP_STALL_ARM_EP0_IN_BITS - : USB_EP_STALL_ARM_EP0_OUT_BITS; + usb_hw_set->ep_stall_arm = (dir == TUSB_DIR_IN) ? USB_EP_STALL_ARM_EP0_IN_BITS : USB_EP_STALL_ARM_EP0_OUT_BITS; } - struct hw_endpoint* ep = hw_endpoint_get_by_addr(ep_addr); - - // stall and clear current pending buffer - // may need to use EP_ABORT + // stall and clear current pending buffer, may need to use EP_ABORT hwep_buf_ctrl_set(ep, USB_BUF_CTRL_STALL); } diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 12a2f2d25..5ec84be16 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -122,7 +122,7 @@ static void __tusb_irq_path_func(hw_handle_buff_status)(void) remaining_buffers &= ~bit; struct hw_endpoint * ep = &epx; - uint32_t ep_ctrl = *hwep_ctrl_reg(ep); + uint32_t ep_ctrl = *hwep_ctrl_reg_host(ep); if ( ep_ctrl & EP_CTRL_DOUBLE_BUFFERED_BITS ) { TU_LOG(3, "Double Buffered: "); @@ -316,9 +316,6 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t ep->ep_addr = ep_addr; ep->dev_addr = dev_addr; - // For host, IN to host == RX, anything else rx == false - ep->rx = (dir == TUSB_DIR_IN); - // Response to a setup packet on EP0 starts with pid of 1 ep->next_pid = (num == 0 ? 1u : 0u); ep->wMaxPacketSize = wMaxPacketSize; @@ -339,7 +336,7 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t { ep_reg |= (uint32_t) ((bmInterval - 1) << EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB); } - *hwep_ctrl_reg(ep) = ep_reg; + *hwep_ctrl_reg_host(ep) = ep_reg; // pico_trace("endpoint control (0x%p) <- 0x%lx\n", ep->endpoint_control, ep_reg); ep->configured = true; @@ -465,8 +462,8 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { // reset epx if it is currently active with unplugged device if (epx.configured && epx.active && epx.dev_addr == dev_addr) { epx.configured = false; - *hwep_ctrl_reg(&epx) = 0; - *hwep_buf_ctrl_reg(&epx) = 0; + *hwep_ctrl_reg_host(&epx) = 0; + *hwep_buf_ctrl_reg_host(&epx) = 0; hw_endpoint_reset_transfer(&epx); } @@ -481,8 +478,8 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { // unconfigure the endpoint ep->configured = false; - *hwep_ctrl_reg(ep) = 0; - *hwep_buf_ctrl_reg(ep) = 0; + *hwep_ctrl_reg_host(ep) = 0; + *hwep_buf_ctrl_reg_host(ep) = 0; hw_endpoint_reset_transfer(ep); } } diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 61f978b0d..8e7bf2dae 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -35,20 +35,15 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTOTYPE //--------------------------------------------------------------------+ -static void _hw_endpoint_xfer_sync(struct hw_endpoint* ep); +static void hwep_xfer_sync(hw_endpoint_t *ep); -#if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX - static bool e15_is_bulkin_ep(struct hw_endpoint* ep); - static bool e15_is_critical_frame_period(struct hw_endpoint* ep); -#else - #define e15_is_bulkin_ep(x) (false) - #define e15_is_critical_frame_period(x) (false) -#endif - -// if usb hardware is in host mode -TU_ATTR_ALWAYS_INLINE static inline bool is_host_mode(void) { - return (usb_hw->main_ctrl & USB_MAIN_CTRL_HOST_NDEVICE_BITS) ? true : false; -} + #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX +static bool e15_is_bulkin_ep(struct hw_endpoint *ep); +static bool e15_is_critical_frame_period(struct hw_endpoint *ep); + #else + #define e15_is_bulkin_ep(x) (false) + #define e15_is_critical_frame_period(x) (false) + #endif //--------------------------------------------------------------------+ // Implementation @@ -94,8 +89,18 @@ void __tusb_irq_path_func(hw_endpoint_reset_transfer)(struct hw_endpoint* ep) { } void __tusb_irq_path_func(hwep_buf_ctrl_update)(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask) { + const bool is_host = rp2usb_is_host_mode(); uint32_t value = 0; - io_rw_32 *buf_ctrl = hwep_buf_ctrl_reg(ep); + io_rw_32 *buf_ctrl; + + #if CFG_TUH_ENABLED + if (is_host) { + buf_ctrl = hwep_buf_ctrl_reg_host(ep); + } else + #endif + { + buf_ctrl = hwep_buf_ctrl_reg_device(ep); + } if (and_mask) { value = *buf_ctrl & and_mask; @@ -110,7 +115,7 @@ void __tusb_irq_path_func(hwep_buf_ctrl_update)(struct hw_endpoint *ep, uint32_t *buf_ctrl = value & ~USB_BUF_CTRL_AVAIL; // 4.1.2.5.1 Con-current access: 12 cycles (should be good for 48*12Mhz = 576Mhz) after write to buffer control // Don't need delay in host mode as host is in charge - if (!is_host_mode()) { + if (!is_host) { busy_wait_at_least_cycles(12); } } @@ -119,9 +124,9 @@ void __tusb_irq_path_func(hwep_buf_ctrl_update)(struct hw_endpoint *ep, uint32_t *buf_ctrl = value; } -// prepare buffer, return buffer control -static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint* ep, uint8_t buf_id) { - uint16_t const buflen = tu_min16(ep->remaining_len, ep->wMaxPacketSize); +// prepare buffer, move data if tx, return buffer control +static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint *ep, uint8_t buf_id, bool is_rx) { + const uint16_t buflen = tu_min16(ep->remaining_len, ep->wMaxPacketSize); ep->remaining_len = (uint16_t) (ep->remaining_len - buflen); uint32_t buf_ctrl = buflen | USB_BUF_CTRL_AVAIL; @@ -130,7 +135,7 @@ static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint* ep, buf_ctrl |= ep->next_pid ? USB_BUF_CTRL_DATA1_PID : USB_BUF_CTRL_DATA0_PID; ep->next_pid ^= 1u; - if (!ep->rx) { + if (!is_rx) { // Copy data from user buffer to hw buffer unaligned_memcpy(ep->hw_data_buf + buf_id * 64, ep->user_buf, buflen); ep->user_buf += buflen; @@ -146,44 +151,66 @@ static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint* ep, buf_ctrl |= USB_BUF_CTRL_LAST; } - if (buf_id) buf_ctrl = buf_ctrl << 16; + if (buf_id) { + buf_ctrl = buf_ctrl << 16; + } return buf_ctrl; } // Prepare buffer control register value void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) { - io_rw_32 *ep_ctrl_reg = hwep_ctrl_reg(ep); - uint32_t ep_ctrl = *ep_ctrl_reg; + const tusb_dir_t dir = tu_edpt_dir(ep->ep_addr); + bool is_rx; + + io_rw_32 *ep_ctrl_reg; + // io_rw_32 *buf_ctrl_reg; + + #if CFG_TUH_ENABLED + const bool is_host = rp2usb_is_host_mode(); + if (is_host) { + // buf_ctrl_reg = hwep_buf_ctrl_reg_host(ep); + ep_ctrl_reg = hwep_ctrl_reg_host(ep); + is_rx = (dir == TUSB_DIR_IN); + } else + #endif + { + // buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); + ep_ctrl_reg = hwep_ctrl_reg_device(ep); + is_rx = (dir == TUSB_DIR_OUT); + } // always compute and start with buffer 0 - uint32_t buf_ctrl = prepare_ep_buffer(ep, 0) | USB_BUF_CTRL_SEL; - - // For now: skip double buffered for OUT endpoint in Device mode, since - // host could send < 64 bytes and cause short packet on buffer0 - // NOTE: this could happen to Host mode IN endpoint - // Also, Host mode "interrupt" endpoint hardware is only single buffered, - // NOTE2: Currently Host bulk is implemented using "interrupt" endpoint - bool const is_host = is_host_mode(); - bool const force_single = (!is_host && !tu_edpt_dir(ep->ep_addr)) || - (is_host && tu_edpt_number(ep->ep_addr) != 0); - - if (ep->remaining_len && !force_single) { - // Use buffer 1 (double buffered) if there is still data - // TODO: Isochronous for buffer1 bit-field is different than CBI (control bulk, interrupt) - - buf_ctrl |= prepare_ep_buffer(ep, 1); - - // Set endpoint control double buffered bit if needed - ep_ctrl &= ~EP_CTRL_INTERRUPT_PER_BUFFER; - ep_ctrl |= EP_CTRL_DOUBLE_BUFFERED_BITS | EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER; - } else { - // Single buffered since 1 is enough - ep_ctrl &= ~(EP_CTRL_DOUBLE_BUFFERED_BITS | EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER); - ep_ctrl |= EP_CTRL_INTERRUPT_PER_BUFFER; - } + uint32_t buf_ctrl = prepare_ep_buffer(ep, 0, is_rx) | USB_BUF_CTRL_SEL; + + // EP0 has no endpoint control register, also usbd only schedule 1 packet at a time (single buffer) + if (ep_ctrl_reg != NULL) { + uint32_t ep_ctrl = *ep_ctrl_reg; + + // For now: skip double buffered for RX e.g OUT endpoint in Device mode, since host could send < 64 bytes and cause + // short packet on buffer0 + // NOTE: this could happen to Host mode IN endpoint Also, Host mode "interrupt" endpoint hardware is only single + // buffered, + // NOTE2: Currently Host bulk is implemented using "interrupt" endpoint + const bool force_single = is_rx; - *ep_ctrl_reg = ep_ctrl; + if (ep->remaining_len && !force_single) { + // Use buffer 1 (double buffered) if there is still data + // TODO: Isochronous for buffer1 bit-field is different than CBI (control bulk, interrupt) + + buf_ctrl |= prepare_ep_buffer(ep, 1, is_rx); + + // Set endpoint control double buffered bit if needed + ep_ctrl &= ~EP_CTRL_INTERRUPT_PER_BUFFER; + ep_ctrl |= EP_CTRL_DOUBLE_BUFFERED_BITS | EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER; + } else { + // Single buffered since 1 is enough + ep_ctrl &= ~(EP_CTRL_DOUBLE_BUFFERED_BITS | EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER); + ep_ctrl |= EP_CTRL_INTERRUPT_PER_BUFFER; + } + + *ep_ctrl_reg = ep_ctrl; + } TU_LOG(3, " Prepare BufCtrl: [0] = 0x%04x [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl)); @@ -221,13 +248,16 @@ void hw_endpoint_xfer_start(struct hw_endpoint* ep, uint8_t* buffer, uint16_t to } // sync endpoint buffer and return transferred bytes -static uint16_t __tusb_irq_path_func(sync_ep_buffer)(struct hw_endpoint* ep, uint8_t buf_id) { - uint32_t buf_ctrl = hwep_buf_ctrl_get(ep); - if (buf_id) buf_ctrl = buf_ctrl >> 16; +static uint16_t __tusb_irq_path_func(sync_ep_buffer)(hw_endpoint_t *ep, io_rw_32 *buf_ctrl_reg, uint8_t buf_id, + bool is_rx) { + uint32_t buf_ctrl = *buf_ctrl_reg; + if (buf_id) { + buf_ctrl = buf_ctrl >> 16; + } - uint16_t xferred_bytes = buf_ctrl & USB_BUF_CTRL_LEN_MASK; + const uint16_t xferred_bytes = buf_ctrl & USB_BUF_CTRL_LEN_MASK; - if (!ep->rx) { + if (!is_rx) { // We are continuing a transfer here. If we are TX, we have successfully // sent some data can increase the length we have sent assert(!(buf_ctrl & USB_BUF_CTRL_FULL)); @@ -245,7 +275,6 @@ static uint16_t __tusb_irq_path_func(sync_ep_buffer)(struct hw_endpoint* ep, uin // Short packet if (xferred_bytes < ep->wMaxPacketSize) { - pico_trace(" Short packet on buffer %d with %u bytes\r\n", buf_id, xferred_bytes); // Reduce total length as this is last packet ep->remaining_len = 0; } @@ -253,21 +282,38 @@ static uint16_t __tusb_irq_path_func(sync_ep_buffer)(struct hw_endpoint* ep, uin return xferred_bytes; } -static void __tusb_irq_path_func(_hw_endpoint_xfer_sync)(struct hw_endpoint* ep) { - // Update hw endpoint struct with info from hardware - // after a buff status interrupt - - uint32_t __unused buf_ctrl = hwep_buf_ctrl_get(ep); - TU_LOG(3, " Sync BufCtrl: [0] = 0x%04x [1] = 0x%04x\r\n", tu_u32_low16(buf_ctrl), tu_u32_high16(buf_ctrl)); +// Update hw endpoint struct with info from hardware after a buff status interrupt +static void __tusb_irq_path_func(hwep_xfer_sync)(hw_endpoint_t *ep) { + // const uint8_t ep_num = tu_edpt_number(ep->ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep->ep_addr); + + io_rw_32 *buf_ctrl_reg; + io_rw_32 *ep_ctrl_reg; + bool is_rx; + + #if CFG_TUH_ENABLED + const bool is_host = rp2usb_is_host_mode(); + if (is_host) { + buf_ctrl_reg = hwep_buf_ctrl_reg_host(ep); + ep_ctrl_reg = hwep_ctrl_reg_host(ep); + is_rx = (dir == TUSB_DIR_IN); + } else + #endif + { + buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); + ep_ctrl_reg = hwep_ctrl_reg_device(ep); + is_rx = (dir == TUSB_DIR_OUT); + } - // always sync buffer 0 - uint16_t buf0_bytes = sync_ep_buffer(ep, 0); + TU_LOG(3, " Sync BufCtrl: [0] = 0x%04x [1] = 0x%04x\r\n", tu_u32_low16(*buf_ctrl_reg), + tu_u32_high16(*buf_ctrl_reg)); + uint16_t buf0_bytes = sync_ep_buffer(ep, buf_ctrl_reg, 0, is_rx); // always sync buffer 0 // sync buffer 1 if double buffered - if ((*hwep_ctrl_reg(ep)) & EP_CTRL_DOUBLE_BUFFERED_BITS) { + if (ep_ctrl_reg != NULL && (*ep_ctrl_reg) & EP_CTRL_DOUBLE_BUFFERED_BITS) { if (buf0_bytes == ep->wMaxPacketSize) { // sync buffer 1 if not short packet - sync_ep_buffer(ep, 1); + sync_ep_buffer(ep, buf_ctrl_reg, 1, is_rx); } else { // short packet on buffer 0 // TODO couldn't figure out how to handle this case which happen with net_lwip_webserver example @@ -309,7 +355,7 @@ bool __tusb_irq_path_func(hw_endpoint_xfer_continue)(struct hw_endpoint* ep) { } // Update EP struct from hardware state - _hw_endpoint_xfer_sync(ep); + hwep_xfer_sync(ep); // Now we have synced our state with the hardware. Is there more data to transfer? // If we are done then notify tinyusb @@ -336,6 +382,7 @@ bool __tusb_irq_path_func(hw_endpoint_xfer_continue)(struct hw_endpoint* ep) { //--------------------------------------------------------------------+ #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX +// E15 is fixed with RP2350 /* Don't mark IN buffers as available during the last 200us of a full-speed frame. This avoids a situation seen with the USB2.0 hub on a Raspberry @@ -356,9 +403,8 @@ bool __tusb_irq_path_func(hw_endpoint_xfer_continue)(struct hw_endpoint* ep) { volatile uint32_t e15_last_sof = 0; // check if Errata 15 is needed for this endpoint i.e device bulk-in -static bool __tusb_irq_path_func(e15_is_bulkin_ep)(struct hw_endpoint* ep) { - return (!is_host_mode() && tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN && - ep->transfer_type == TUSB_XFER_BULK); +static bool __tusb_irq_path_func(e15_is_bulkin_ep)(struct hw_endpoint *ep) { + return (!rp2usb_is_host_mode() && tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN && ep->transfer_type == TUSB_XFER_BULK); } // check if we need to apply Errata 15 workaround : i.e diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h index 603640c6d..2ec00694e 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.h +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h @@ -48,10 +48,6 @@ typedef struct hw_endpoint // Is this a valid struct bool configured; - // Transfer direction (i.e. IN is rx for host but tx for device) - // allows us to common up transfer functions - bool rx; - uint8_t ep_addr; uint8_t next_pid; @@ -115,61 +111,46 @@ TU_ATTR_ALWAYS_INLINE static inline void hw_endpoint_lock_update(__unused struct // sense to have worker and IRQ on same core, however I think using critsec is about equivalent. } -TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_ctrl_reg(struct hw_endpoint *ep) { - (void)ep; -#if CFG_TUH_ENABLED - if (rp2usb_is_host_mode()) { - if (ep->transfer_type == TUSB_XFER_CONTROL) { - return &usbh_dpram->epx_ctrl; - } - return &usbh_dpram->int_ep_ctrl[ep->interrupt_num].ctrl; +// #if CFG_TUD_ENABLED +TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_ctrl_reg_device(struct hw_endpoint *ep) { + uint8_t const epnum = tu_edpt_number(ep->ep_addr); + const uint8_t dir = (uint8_t)tu_edpt_dir(ep->ep_addr); + if (epnum == 0) { + // EP0 has no endpoint control register because the buffer offsets are fixed and always enabled + return NULL; } -#endif - -#if CFG_TUD_ENABLED - if (!rp2usb_is_host_mode()) { - const uint8_t num = tu_edpt_number(ep->ep_addr); - if (num == 0) { - return NULL; - } - return (tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN) ? &usb_dpram->ep_ctrl[num - 1].in - : &usb_dpram->ep_ctrl[num - 1].out; - } -#endif + return (dir == TUSB_DIR_IN) ? &usb_dpram->ep_ctrl[epnum - 1].in : &usb_dpram->ep_ctrl[epnum - 1].out; +} - return NULL; +TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_buf_ctrl_reg_device(struct hw_endpoint *ep) { + const uint8_t epnum = tu_edpt_number(ep->ep_addr); + const uint8_t dir = (uint8_t)tu_edpt_dir(ep->ep_addr); + return (dir == TUSB_DIR_IN) ? &usb_dpram->ep_buf_ctrl[epnum].in : &usb_dpram->ep_buf_ctrl[epnum].out; } +// #endif -TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_buf_ctrl_reg(struct hw_endpoint *ep) { - (void)ep; #if CFG_TUH_ENABLED - if (rp2usb_is_host_mode()) { - if (ep->transfer_type == TUSB_XFER_CONTROL) { - return &usbh_dpram->epx_buf_ctrl; - } - return &usbh_dpram->int_ep_buffer_ctrl[ep->interrupt_num].ctrl; +TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_ctrl_reg_host(struct hw_endpoint *ep) { + if (ep->transfer_type == TUSB_XFER_CONTROL) { + return &usbh_dpram->epx_ctrl; } -#endif + return &usbh_dpram->int_ep_ctrl[ep->interrupt_num].ctrl; +} -#if CFG_TUD_ENABLED - if (!rp2usb_is_host_mode()) { - const uint8_t num = tu_edpt_number(ep->ep_addr); - return (tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN) ? &usb_dpram->ep_buf_ctrl[num].in - : &usb_dpram->ep_buf_ctrl[num].out; +TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_buf_ctrl_reg_host(struct hw_endpoint *ep) { + if (ep->transfer_type == TUSB_XFER_CONTROL) { + return &usbh_dpram->epx_buf_ctrl; } -#endif - return NULL; + return &usbh_dpram->int_ep_buffer_ctrl[ep->interrupt_num].ctrl; } +#endif + //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ void hwep_buf_ctrl_update(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask); -TU_ATTR_ALWAYS_INLINE static inline uint32_t hwep_buf_ctrl_get(struct hw_endpoint *ep) { - return *hwep_buf_ctrl_reg(ep); -} - TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_set(struct hw_endpoint *ep, uint32_t value) { hwep_buf_ctrl_update(ep, 0, value); } -- cgit v1.3.1 From f0a3d448347047c9df62518fbd641502b2d55333 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 8 Jan 2026 00:54:21 +0700 Subject: change signature for hwep_buf_ctrl_* to take pointer to buf control instead of hwep --- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 16 ++++----- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 6 ---- src/portable/raspberrypi/rp2040/rp2040_usb.c | 42 ++++++++++------------- src/portable/raspberrypi/rp2040/rp2040_usb.h | 50 ++++++++++------------------ 4 files changed, 42 insertions(+), 72 deletions(-) diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 6c74029d8..5c21590c4 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -87,13 +87,6 @@ static void hw_endpoint_init(hw_endpoint_t *ep, uint8_t ep_addr, uint16_t wMaxPa // Buffer offset is fixed (also double buffered) ep->hw_data_buf = (uint8_t*) &usb_dpram->ep0_buf_a[0]; } else { - // Set the endpoint control register (starts at EP1, hence num-1) - // if (dir == TUSB_DIR_IN) { - // ep->endpoint_control = &usb_dpram->ep_ctrl[num - 1].in; - // } else { - // ep->endpoint_control = &usb_dpram->ep_ctrl[num - 1].out; - // } - // round up size to multiple of 64 uint16_t size = (uint16_t)tu_round_up(wMaxPacketSize, 64); @@ -146,7 +139,8 @@ static void hw_endpoint_abort_xfer(struct hw_endpoint* ep) { buf_ctrl |= USB_BUF_CTRL_DATA1_PID; } - hwep_buf_ctrl_set(ep, buf_ctrl); + io_rw_32 *buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); + hwep_buf_ctrl_set(buf_ctrl_reg, buf_ctrl); hw_endpoint_reset_transfer(ep); if (rp2040_chip_version() >= 2) { @@ -528,7 +522,8 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { } // stall and clear current pending buffer, may need to use EP_ABORT - hwep_buf_ctrl_set(ep, USB_BUF_CTRL_STALL); + io_rw_32 *buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); + hwep_buf_ctrl_set(buf_ctrl_reg, USB_BUF_CTRL_STALL); } void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { @@ -539,7 +534,8 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { // clear stall also reset toggle to DATA0, ready for next transfer ep->next_pid = 0; - hwep_buf_ctrl_clear_mask(ep, USB_BUF_CTRL_STALL); + io_rw_32 *buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); + hwep_buf_ctrl_clear_mask(buf_ctrl_reg, USB_BUF_CTRL_STALL); } } diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 5ec84be16..2e5f0fe1f 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -284,8 +284,6 @@ static struct hw_endpoint *_hw_endpoint_allocate(uint8_t transfer_type) ep = _next_free_interrupt_ep(); pico_info("Allocate %s ep %d\n", tu_edpt_type_str(transfer_type), ep->interrupt_num); assert(ep); - // ep->buffer_control = &usbh_dpram->int_ep_buffer_ctrl[ep->interrupt_num].ctrl; - // ep->endpoint_control = &usbh_dpram->int_ep_ctrl[ep->interrupt_num].ctrl; // 0 for epx (double buffered): TODO increase to 1024 for ISO // 2x64 for intep0 // 3x64 for intep1 @@ -295,8 +293,6 @@ static struct hw_endpoint *_hw_endpoint_allocate(uint8_t transfer_type) else { ep = &epx; - // ep->buffer_control = &usbh_dpram->epx_buf_ctrl; - // ep->endpoint_control = &usbh_dpram->epx_ctrl; ep->hw_data_buf = &usbh_dpram->epx_data[0]; } @@ -306,8 +302,6 @@ static struct hw_endpoint *_hw_endpoint_allocate(uint8_t transfer_type) static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type, uint8_t bmInterval) { // Already has data buffer, endpoint control, and buffer control allocated at this point - // assert(ep->endpoint_control); - // assert(ep->buffer_control); assert(ep->hw_data_buf); uint8_t const num = tu_edpt_number(ep_addr); diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 8e7bf2dae..5258b9705 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -88,32 +88,25 @@ void __tusb_irq_path_func(hw_endpoint_reset_transfer)(struct hw_endpoint* ep) { ep->user_buf = 0; } -void __tusb_irq_path_func(hwep_buf_ctrl_update)(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask) { +void __tusb_irq_path_func(hwep_buf_ctrl_update)(io_rw_32 *buf_ctrl_reg, uint32_t and_mask, uint32_t or_mask) { const bool is_host = rp2usb_is_host_mode(); - uint32_t value = 0; - io_rw_32 *buf_ctrl; - - #if CFG_TUH_ENABLED - if (is_host) { - buf_ctrl = hwep_buf_ctrl_reg_host(ep); - } else - #endif - { - buf_ctrl = hwep_buf_ctrl_reg_device(ep); - } + uint32_t value = 0; + uint32_t buf_ctrl = *buf_ctrl_reg; if (and_mask) { - value = *buf_ctrl & and_mask; + value = buf_ctrl & and_mask; } if (or_mask) { value |= or_mask; if (or_mask & USB_BUF_CTRL_AVAIL) { - if (*buf_ctrl & USB_BUF_CTRL_AVAIL) { - panic("ep %02X was already available", ep->ep_addr); + if (buf_ctrl & USB_BUF_CTRL_AVAIL) { + panic("buf_ctrl @%lX already available", (uintptr_t)buf_ctrl_reg); } - *buf_ctrl = value & ~USB_BUF_CTRL_AVAIL; - // 4.1.2.5.1 Con-current access: 12 cycles (should be good for 48*12Mhz = 576Mhz) after write to buffer control + *buf_ctrl_reg = value & ~USB_BUF_CTRL_AVAIL; + + // Section 4.1.2.7.1 (rp2040) / 12.7.3.7.1 (rp2350) Concurrent access: after write to buffer control, we need to + // wait at least 1/48 mhz (usb clock), 12 cycles should be good for 48*12Mhz = 576Mhz. // Don't need delay in host mode as host is in charge if (!is_host) { busy_wait_at_least_cycles(12); @@ -121,7 +114,7 @@ void __tusb_irq_path_func(hwep_buf_ctrl_update)(struct hw_endpoint *ep, uint32_t } } - *buf_ctrl = value; + *buf_ctrl_reg = value; } // prepare buffer, move data if tx, return buffer control @@ -161,21 +154,21 @@ static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint *ep, // Prepare buffer control register value void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) { const tusb_dir_t dir = tu_edpt_dir(ep->ep_addr); - bool is_rx; + bool is_rx; io_rw_32 *ep_ctrl_reg; - // io_rw_32 *buf_ctrl_reg; + io_rw_32 *buf_ctrl_reg; #if CFG_TUH_ENABLED const bool is_host = rp2usb_is_host_mode(); if (is_host) { - // buf_ctrl_reg = hwep_buf_ctrl_reg_host(ep); + buf_ctrl_reg = hwep_buf_ctrl_reg_host(ep); ep_ctrl_reg = hwep_ctrl_reg_host(ep); is_rx = (dir == TUSB_DIR_IN); } else #endif { - // buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); + buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); ep_ctrl_reg = hwep_ctrl_reg_device(ep); is_rx = (dir == TUSB_DIR_OUT); } @@ -216,7 +209,7 @@ void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) // Finally, write to buffer_control which will trigger the transfer // the next time the controller polls this dpram address - hwep_buf_ctrl_set(ep, buf_ctrl); + hwep_buf_ctrl_set(buf_ctrl_reg, buf_ctrl); } void hw_endpoint_xfer_start(struct hw_endpoint* ep, uint8_t* buffer, uint16_t total_len) { @@ -334,7 +327,8 @@ static void __tusb_irq_path_func(hwep_xfer_sync)(hw_endpoint_t *ep) { ep_ctrl &= ~(EP_CTRL_DOUBLE_BUFFERED_BITS | EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER); ep_ctrl |= EP_CTRL_INTERRUPT_PER_BUFFER; - hwep_buf_ctrl_set(ep, 0); + io_rw_32 *buf_ctrl_reg = is_host ? hwep_buf_ctrl_reg_host(ep) : hwep_buf_ctrl_reg_device(ep); + hwep_buf_ctrl_set(buf_ctrl_reg, 0); usb_hw->abort &= ~TU_BIT(ep_id); diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h index 2ec00694e..e9fed73de 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.h +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h @@ -45,41 +45,27 @@ // Hardware information per endpoint typedef struct hw_endpoint { - // Is this a valid struct - bool configured; - uint8_t ep_addr; uint8_t next_pid; + // Interrupt, bulk, etc + uint8_t transfer_type; - // Endpoint control register - // io_rw_32 *endpoint_control; - - // Buffer control register - // io_rw_32 *buffer_control; + bool active; // Endpoint is in use + uint8_t pending; // Transfer scheduled but not active - // Buffer pointer in usb dpram - uint8_t *hw_data_buf; + uint16_t wMaxPacketSize; - // User buffer in main memory - uint8_t *user_buf; + uint8_t *hw_data_buf; // Buffer pointer in usb dpram + uint8_t *user_buf; // User buffer in main memory // Current transfer information uint16_t remaining_len; uint16_t xferred_len; - // Data needed from EP descriptor - uint16_t wMaxPacketSize; - - // Endpoint is in use - bool active; - - // Interrupt, bulk, etc - uint8_t transfer_type; - - // Transfer scheduled but not active - uint8_t pending; - #if CFG_TUH_ENABLED + // Is this a valid struct + bool configured; + // Only needed for host uint8_t dev_addr; @@ -131,7 +117,7 @@ TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_buf_ctrl_reg_device(struct hw #if CFG_TUH_ENABLED TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_ctrl_reg_host(struct hw_endpoint *ep) { - if (ep->transfer_type == TUSB_XFER_CONTROL) { + if (tu_edpt_number(ep->ep_addr) == 0) { return &usbh_dpram->epx_ctrl; } return &usbh_dpram->int_ep_ctrl[ep->interrupt_num].ctrl; @@ -149,18 +135,18 @@ TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_buf_ctrl_reg_host(struct hw_e //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ -void hwep_buf_ctrl_update(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask); +void hwep_buf_ctrl_update(io_rw_32 *buf_ctrl_reg, uint32_t and_mask, uint32_t or_mask); -TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_set(struct hw_endpoint *ep, uint32_t value) { - hwep_buf_ctrl_update(ep, 0, value); +TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_set(io_rw_32 *buf_ctrl_reg, uint32_t value) { + hwep_buf_ctrl_update(buf_ctrl_reg, 0, value); } -TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_set_mask32(struct hw_endpoint *ep, uint32_t value) { - hwep_buf_ctrl_update(ep, ~value, value); +TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_set_mask(io_rw_32 *buf_ctrl_reg, uint32_t value) { + hwep_buf_ctrl_update(buf_ctrl_reg, ~value, value); } -TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_clear_mask(struct hw_endpoint *ep, uint32_t value) { - hwep_buf_ctrl_update(ep, ~value, 0); +TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_clear_mask(io_rw_32 *buf_ctrl_reg, uint32_t value) { + hwep_buf_ctrl_update(buf_ctrl_reg, ~value, 0); } static inline uintptr_t hw_data_offset(uint8_t *buf) { -- cgit v1.3.1 From 07416f704f1a55b286d5c9b082e6f1e3e51ce9b0 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 8 Jan 2026 11:33:08 +0700 Subject: minor clean up --- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 68 +++++++++++++--------------- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 31 ++++++------- src/portable/raspberrypi/rp2040/rp2040_usb.c | 26 +++++------ src/portable/raspberrypi/rp2040/rp2040_usb.h | 34 +++++++------- 4 files changed, 77 insertions(+), 82 deletions(-) diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 5c21590c4..952245cb1 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -71,18 +71,17 @@ TU_ATTR_ALWAYS_INLINE static inline hw_endpoint_t *hw_endpoint_get_by_addr(uint8 // main processing for dcd_edpt_iso_activate static void hw_endpoint_init(hw_endpoint_t *ep, uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type) { - const uint8_t epnum = tu_edpt_number(ep_addr); - ep->ep_addr = ep_addr; ep->next_pid = 0u; ep->wMaxPacketSize = wMaxPacketSize; ep->transfer_type = transfer_type; // Clear existing buffer control state - io_rw_32 *buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); + io_rw_32 *buf_ctrl_reg = hwbuf_ctrl_reg_device(ep); *buf_ctrl_reg = 0; // allocated hw buffer + const uint8_t epnum = tu_edpt_number(ep_addr); if (epnum == 0) { // Buffer offset is fixed (also double buffered) ep->hw_data_buf = (uint8_t*) &usb_dpram->ep0_buf_a[0]; @@ -104,16 +103,9 @@ static void hw_endpoint_init(hw_endpoint_t *ep, uint8_t ep_addr, uint16_t wMaxPa } } -// Init, allocate buffer and enable endpoint -static void hw_endpoint_open(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type) { - const uint8_t epnum = tu_edpt_number(ep_addr); - const tusb_dir_t dir = tu_edpt_dir(ep_addr); - hw_endpoint_t *ep = hw_endpoint_get(epnum, dir); - - hw_endpoint_init(ep, ep_addr, wMaxPacketSize, transfer_type); - - // Set endpoint control register to enable (EP0 has no endpoint control register) +static void hw_endpoint_enable(hw_endpoint_t *ep, uint8_t transfer_type) { io_rw_32 *ctrl_reg = hwep_ctrl_reg_device(ep); + // Set endpoint control register to enable (EP0 has no endpoint control register) if (ctrl_reg != NULL) { const uint32_t ctrl_value = EP_CTRL_ENABLE_BITS | ((uint32_t)transfer_type << EP_CTRL_BUFFER_TYPE_LSB) | hw_data_offset(ep->hw_data_buf); @@ -121,14 +113,24 @@ static void hw_endpoint_open(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t t } } +// Init and enable endpoint +static void hw_endpoint_open(uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type) { + const uint8_t epnum = tu_edpt_number(ep_addr); + const tusb_dir_t dir = tu_edpt_dir(ep_addr); + hw_endpoint_t *ep = hw_endpoint_get(epnum, dir); + + hw_endpoint_init(ep, ep_addr, wMaxPacketSize, transfer_type); + hw_endpoint_enable(ep, transfer_type); +} + static void hw_endpoint_abort_xfer(struct hw_endpoint* ep) { // Abort any pending transfer - // Due to Errata RP2040-E2: ABORT flag is only applicable for B2 and later (unusable for B0, B1). - // Which means we are not guaranteed to safely abort pending transfer on B0 and B1. const uint8_t dir = (uint8_t)tu_edpt_dir(ep->ep_addr); - const uint8_t epnum = tu_edpt_number(ep->ep_addr); + const uint8_t epnum = tu_edpt_number(ep->ep_addr); const uint32_t abort_mask = TU_BIT((epnum << 1) | (dir ? 0 : 1)); + // Due to Errata RP2040-E2: ABORT flag is only applicable for B2 and later (unusable for B0, B1). + // Which means we are not guaranteed to safely abort pending transfer on B0 and B1. if (rp2040_chip_version() >= 2) { usb_hw_set->abort = abort_mask; while ((usb_hw->abort_done & abort_mask) != abort_mask) {} @@ -139,8 +141,8 @@ static void hw_endpoint_abort_xfer(struct hw_endpoint* ep) { buf_ctrl |= USB_BUF_CTRL_DATA1_PID; } - io_rw_32 *buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); - hwep_buf_ctrl_set(buf_ctrl_reg, buf_ctrl); + io_rw_32 *buf_ctrl_reg = hwbuf_ctrl_reg_device(ep); + hwbuf_ctrl_set(buf_ctrl_reg, buf_ctrl); hw_endpoint_reset_transfer(ep); if (rp2040_chip_version() >= 2) { @@ -265,15 +267,12 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { #if FORCE_VBUS_DETECT == 0 // Since we force VBUS detect On, device will always think it is connected and // couldn't distinguish between disconnect and suspend - if (status & USB_INTS_DEV_CONN_DIS_BITS) - { + if (status & USB_INTS_DEV_CONN_DIS_BITS) { handled |= USB_INTS_DEV_CONN_DIS_BITS; - if ( usb_hw->sie_status & USB_SIE_STATUS_CONNECTED_BITS ) - { + if (usb_hw->sie_status & USB_SIE_STATUS_CONNECTED_BITS) { // Connected: nothing to do - }else - { + } else { // Disconnected dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, true); } @@ -295,8 +294,10 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { #if TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX // Only run enumeration workaround if pull up is enabled - if (usb_hw->sie_ctrl & USB_SIE_CTRL_PULLUP_EN_BITS) rp2040_usb_device_enumeration_fix(); -#endif + if (usb_hw->sie_ctrl & USB_SIE_CTRL_PULLUP_EN_BITS) { + rp2040_usb_device_enumeration_fix(); + } + #endif } /* Note from pico datasheet 4.1.2.6.4 (v1.2) @@ -458,7 +459,6 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const* req bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const* desc_edpt) { (void) rhport; const uint8_t xfer_type = desc_edpt->bmAttributes.xfer; - TU_VERIFY(xfer_type != TUSB_XFER_ISOCHRONOUS); hw_endpoint_open(desc_edpt->bEndpointAddress, tu_edpt_packet_size(desc_edpt), xfer_type); return true; } @@ -485,13 +485,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) } ep->wMaxPacketSize = ep_desc->wMaxPacketSize; - // Set control register to enable endpoint - io_rw_32 *ctrl_reg = hwep_ctrl_reg_device(ep); - if (ctrl_reg != NULL) { - const uint32_t ctrl_value = EP_CTRL_ENABLE_BITS | ((uint32_t)TUSB_XFER_ISOCHRONOUS << EP_CTRL_BUFFER_TYPE_LSB) | - hw_data_offset(ep->hw_data_buf); - *ctrl_reg = ctrl_value; - } + hw_endpoint_enable(ep, TUSB_XFER_ISOCHRONOUS); return true; } @@ -522,8 +516,8 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { } // stall and clear current pending buffer, may need to use EP_ABORT - io_rw_32 *buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); - hwep_buf_ctrl_set(buf_ctrl_reg, USB_BUF_CTRL_STALL); + io_rw_32 *buf_ctrl_reg = hwbuf_ctrl_reg_device(ep); + hwbuf_ctrl_set(buf_ctrl_reg, USB_BUF_CTRL_STALL); } void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { @@ -534,8 +528,8 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { // clear stall also reset toggle to DATA0, ready for next transfer ep->next_pid = 0; - io_rw_32 *buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); - hwep_buf_ctrl_clear_mask(buf_ctrl_reg, USB_BUF_CTRL_STALL); + io_rw_32 *buf_ctrl_reg = hwbuf_ctrl_reg_device(ep); + hwbuf_ctrl_clear_mask(buf_ctrl_reg, USB_BUF_CTRL_STALL); } } diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 2e5f0fe1f..c4eba0d5f 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -62,22 +62,23 @@ enum { USB_SIE_CTRL_PULLDOWN_EN_BITS | USB_SIE_CTRL_EP0_INT_1BUF_BITS }; -static struct hw_endpoint *get_dev_ep(uint8_t dev_addr, uint8_t ep_addr) -{ +static struct hw_endpoint *get_dev_ep(uint8_t dev_addr, uint8_t ep_addr) { uint8_t num = tu_edpt_number(ep_addr); - if ( num == 0 ) return &epx; + if (num == 0) { + return &epx; + } - for ( uint32_t i = 1; i < TU_ARRAY_SIZE(ep_pool); i++ ) - { + for (uint32_t i = 1; i < TU_ARRAY_SIZE(ep_pool); i++) { struct hw_endpoint *ep = &ep_pool[i]; - if ( ep->configured && (ep->dev_addr == dev_addr) && (ep->ep_addr == ep_addr) ) return ep; + if (ep->configured && (ep->dev_addr == dev_addr) && (ep->ep_addr == ep_addr)) { + return ep; + } } return NULL; } -TU_ATTR_ALWAYS_INLINE static inline uint8_t dev_speed(void) -{ +TU_ATTR_ALWAYS_INLINE static inline uint8_t dev_speed(void) { return (usb_hw->sie_status & USB_SIE_STATUS_SPEED_BITS) >> USB_SIE_STATUS_SPEED_LSB; } @@ -98,8 +99,7 @@ static void __tusb_irq_path_func(hw_xfer_complete)(struct hw_endpoint *ep, xfer_ hcd_event_xfer_complete(dev_addr, ep_addr, xferred_len, xfer_result, true); } -static void __tusb_irq_path_func(_handle_buff_status_bit)(uint bit, struct hw_endpoint *ep) -{ +static void __tusb_irq_path_func(_handle_buff_status_bit)(uint bit, struct hw_endpoint *ep) { usb_hw_clear->buf_status = bit; // EP may have been stalled? assert(ep->active); @@ -357,8 +357,7 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t // Finally, enable interrupt that endpoint usb_hw_set->int_ep_ctrl = 1 << (ep->interrupt_num + 1); - // If it's an interrupt endpoint we need to set up the buffer control - // register + // If it's an interrupt endpoint we need to set up the buffer control register } } @@ -456,8 +455,8 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { // reset epx if it is currently active with unplugged device if (epx.configured && epx.active && epx.dev_addr == dev_addr) { epx.configured = false; - *hwep_ctrl_reg_host(&epx) = 0; - *hwep_buf_ctrl_reg_host(&epx) = 0; + *hwep_ctrl_reg_host(&epx) = 0; + *hwbuf_ctrl_reg_host(&epx) = 0; hw_endpoint_reset_transfer(&epx); } @@ -472,8 +471,8 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { // unconfigure the endpoint ep->configured = false; - *hwep_ctrl_reg_host(ep) = 0; - *hwep_buf_ctrl_reg_host(ep) = 0; + *hwep_ctrl_reg_host(ep) = 0; + *hwbuf_ctrl_reg_host(ep) = 0; hw_endpoint_reset_transfer(ep); } } diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 5258b9705..798129e0c 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -88,7 +88,7 @@ void __tusb_irq_path_func(hw_endpoint_reset_transfer)(struct hw_endpoint* ep) { ep->user_buf = 0; } -void __tusb_irq_path_func(hwep_buf_ctrl_update)(io_rw_32 *buf_ctrl_reg, uint32_t and_mask, uint32_t or_mask) { +void __tusb_irq_path_func(hwbuf_ctrl_update)(io_rw_32 *buf_ctrl_reg, uint32_t and_mask, uint32_t or_mask) { const bool is_host = rp2usb_is_host_mode(); uint32_t value = 0; uint32_t buf_ctrl = *buf_ctrl_reg; @@ -101,7 +101,7 @@ void __tusb_irq_path_func(hwep_buf_ctrl_update)(io_rw_32 *buf_ctrl_reg, uint32_t value |= or_mask; if (or_mask & USB_BUF_CTRL_AVAIL) { if (buf_ctrl & USB_BUF_CTRL_AVAIL) { - panic("buf_ctrl @%lX already available", (uintptr_t)buf_ctrl_reg); + panic("buf_ctrl @ 0x%lX already available", (uintptr_t)buf_ctrl_reg); } *buf_ctrl_reg = value & ~USB_BUF_CTRL_AVAIL; @@ -162,15 +162,15 @@ void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) #if CFG_TUH_ENABLED const bool is_host = rp2usb_is_host_mode(); if (is_host) { - buf_ctrl_reg = hwep_buf_ctrl_reg_host(ep); - ep_ctrl_reg = hwep_ctrl_reg_host(ep); - is_rx = (dir == TUSB_DIR_IN); + buf_ctrl_reg = hwbuf_ctrl_reg_host(ep); + ep_ctrl_reg = hwep_ctrl_reg_host(ep); + is_rx = (dir == TUSB_DIR_IN); } else #endif { - buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); - ep_ctrl_reg = hwep_ctrl_reg_device(ep); - is_rx = (dir == TUSB_DIR_OUT); + buf_ctrl_reg = hwbuf_ctrl_reg_device(ep); + ep_ctrl_reg = hwep_ctrl_reg_device(ep); + is_rx = (dir == TUSB_DIR_OUT); } // always compute and start with buffer 0 @@ -209,7 +209,7 @@ void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) // Finally, write to buffer_control which will trigger the transfer // the next time the controller polls this dpram address - hwep_buf_ctrl_set(buf_ctrl_reg, buf_ctrl); + hwbuf_ctrl_set(buf_ctrl_reg, buf_ctrl); } void hw_endpoint_xfer_start(struct hw_endpoint* ep, uint8_t* buffer, uint16_t total_len) { @@ -287,13 +287,13 @@ static void __tusb_irq_path_func(hwep_xfer_sync)(hw_endpoint_t *ep) { #if CFG_TUH_ENABLED const bool is_host = rp2usb_is_host_mode(); if (is_host) { - buf_ctrl_reg = hwep_buf_ctrl_reg_host(ep); + buf_ctrl_reg = hwbuf_ctrl_reg_host(ep); ep_ctrl_reg = hwep_ctrl_reg_host(ep); is_rx = (dir == TUSB_DIR_IN); } else #endif { - buf_ctrl_reg = hwep_buf_ctrl_reg_device(ep); + buf_ctrl_reg = hwbuf_ctrl_reg_device(ep); ep_ctrl_reg = hwep_ctrl_reg_device(ep); is_rx = (dir == TUSB_DIR_OUT); } @@ -327,8 +327,8 @@ static void __tusb_irq_path_func(hwep_xfer_sync)(hw_endpoint_t *ep) { ep_ctrl &= ~(EP_CTRL_DOUBLE_BUFFERED_BITS | EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER); ep_ctrl |= EP_CTRL_INTERRUPT_PER_BUFFER; - io_rw_32 *buf_ctrl_reg = is_host ? hwep_buf_ctrl_reg_host(ep) : hwep_buf_ctrl_reg_device(ep); - hwep_buf_ctrl_set(buf_ctrl_reg, 0); + io_rw_32 *buf_ctrl_reg = is_host ? hwbuf_ctrl_reg_host(ep) : hwbuf_ctrl_reg_device(ep); + hwbuf_ctrl_set(buf_ctrl_reg, 0); usb_hw->abort &= ~TU_BIT(ep_id); diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h index e9fed73de..368bb6509 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.h +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h @@ -1,10 +1,6 @@ #ifndef RP2040_COMMON_H_ #define RP2040_COMMON_H_ -#if defined(RP2040_USB_HOST_MODE) && defined(RP2040_USB_DEVICE_MODE) -#error TinyUSB device and host mode not supported at the same time -#endif - #include "common/tusb_common.h" #include "pico.h" @@ -13,6 +9,10 @@ #include "hardware/resets.h" #include "hardware/timer.h" +#if defined(RP2040_USB_HOST_MODE) && defined(RP2040_USB_DEVICE_MODE) + #error TinyUSB device and host mode not supported at the same time +#endif + #if defined(PICO_RP2040_USB_DEVICE_ENUMERATION_FIX) && !defined(TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX) #define TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX PICO_RP2040_USB_DEVICE_ENUMERATION_FIX #endif @@ -36,6 +36,9 @@ #define __tusb_irq_path_func(x) x #endif +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ #define usb_hw_set ((usb_hw_t *) hw_set_alias_untyped(usb_hw)) #define usb_hw_clear ((usb_hw_t *) hw_clear_alias_untyped(usb_hw)) @@ -56,9 +59,9 @@ typedef struct hw_endpoint uint16_t wMaxPacketSize; uint8_t *hw_data_buf; // Buffer pointer in usb dpram - uint8_t *user_buf; // User buffer in main memory // Current transfer information + uint8_t *user_buf; // User buffer in main memory uint16_t remaining_len; uint16_t xferred_len; @@ -108,7 +111,7 @@ TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_ctrl_reg_device(struct hw_end return (dir == TUSB_DIR_IN) ? &usb_dpram->ep_ctrl[epnum - 1].in : &usb_dpram->ep_ctrl[epnum - 1].out; } -TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_buf_ctrl_reg_device(struct hw_endpoint *ep) { +TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwbuf_ctrl_reg_device(struct hw_endpoint *ep) { const uint8_t epnum = tu_edpt_number(ep->ep_addr); const uint8_t dir = (uint8_t)tu_edpt_dir(ep->ep_addr); return (dir == TUSB_DIR_IN) ? &usb_dpram->ep_buf_ctrl[epnum].in : &usb_dpram->ep_buf_ctrl[epnum].out; @@ -123,30 +126,29 @@ TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_ctrl_reg_host(struct hw_endpo return &usbh_dpram->int_ep_ctrl[ep->interrupt_num].ctrl; } -TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwep_buf_ctrl_reg_host(struct hw_endpoint *ep) { - if (ep->transfer_type == TUSB_XFER_CONTROL) { +TU_ATTR_ALWAYS_INLINE static inline io_rw_32 *hwbuf_ctrl_reg_host(struct hw_endpoint *ep) { + if (tu_edpt_number(ep->ep_addr) == 0) { return &usbh_dpram->epx_buf_ctrl; } return &usbh_dpram->int_ep_buffer_ctrl[ep->interrupt_num].ctrl; } #endif - //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ -void hwep_buf_ctrl_update(io_rw_32 *buf_ctrl_reg, uint32_t and_mask, uint32_t or_mask); +void hwbuf_ctrl_update(io_rw_32 *buf_ctrl_reg, uint32_t and_mask, uint32_t or_mask); -TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_set(io_rw_32 *buf_ctrl_reg, uint32_t value) { - hwep_buf_ctrl_update(buf_ctrl_reg, 0, value); +TU_ATTR_ALWAYS_INLINE static inline void hwbuf_ctrl_set(io_rw_32 *buf_ctrl_reg, uint32_t value) { + hwbuf_ctrl_update(buf_ctrl_reg, 0, value); } -TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_set_mask(io_rw_32 *buf_ctrl_reg, uint32_t value) { - hwep_buf_ctrl_update(buf_ctrl_reg, ~value, value); +TU_ATTR_ALWAYS_INLINE static inline void hwbuf_ctrl_set_mask(io_rw_32 *buf_ctrl_reg, uint32_t value) { + hwbuf_ctrl_update(buf_ctrl_reg, ~value, value); } -TU_ATTR_ALWAYS_INLINE static inline void hwep_buf_ctrl_clear_mask(io_rw_32 *buf_ctrl_reg, uint32_t value) { - hwep_buf_ctrl_update(buf_ctrl_reg, ~value, 0); +TU_ATTR_ALWAYS_INLINE static inline void hwbuf_ctrl_clear_mask(io_rw_32 *buf_ctrl_reg, uint32_t value) { + hwbuf_ctrl_update(buf_ctrl_reg, ~value, 0); } static inline uintptr_t hw_data_offset(uint8_t *buf) { -- cgit v1.3.1 From d7e715d5c238e9b05ef711a1a73d54c40b37729e Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 8 Jan 2026 15:42:08 +0700 Subject: fix hcd force_single mistake by refactor --- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 42 +++++++++------------------- src/portable/raspberrypi/rp2040/rp2040_usb.c | 5 ++-- 2 files changed, 16 insertions(+), 31 deletions(-) diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index c4eba0d5f..db3a81c87 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -110,35 +110,24 @@ static void __tusb_irq_path_func(_handle_buff_status_bit)(uint bit, struct hw_en } } -static void __tusb_irq_path_func(hw_handle_buff_status)(void) -{ +static void __tusb_irq_path_func(handle_hwbuf_status)(void) { uint32_t remaining_buffers = usb_hw->buf_status; pico_trace("buf_status 0x%08lx\n", remaining_buffers); // Check EPX first uint bit = 0b1; - if ( remaining_buffers & bit ) - { + if (remaining_buffers & bit) { remaining_buffers &= ~bit; struct hw_endpoint * ep = &epx; - uint32_t ep_ctrl = *hwep_ctrl_reg_host(ep); - if ( ep_ctrl & EP_CTRL_DOUBLE_BUFFERED_BITS ) - { - TU_LOG(3, "Double Buffered: "); - } - else - { - TU_LOG(3, "Single Buffered: "); - } - TU_LOG_HEX(3, ep_ctrl); + // uint32_t ep_ctrl = *hwep_ctrl_reg_host(ep); + // TU_LOG_HEX(3, ep_ctrl); _handle_buff_status_bit(bit, ep); } // Check "interrupt" (asynchronous) endpoints for both IN and OUT - for ( uint i = 1; i <= USB_HOST_INTERRUPT_ENDPOINTS && remaining_buffers; i++ ) - { + for (uint i = 1; i <= USB_HOST_INTERRUPT_ENDPOINTS && remaining_buffers; i++) { // EPX is bit 0 & 1 // IEP1 IN is bit 2 // IEP1 OUT is bit 3 @@ -147,19 +136,16 @@ static void __tusb_irq_path_func(hw_handle_buff_status)(void) // IEP3 IN is bit 6 // IEP3 OUT is bit 7 // etc - for ( uint j = 0; j < 2; j++ ) - { + for (uint j = 0; j < 2; j++) { bit = 1 << (i * 2 + j); - if ( remaining_buffers & bit ) - { + if (remaining_buffers & bit) { remaining_buffers &= ~bit; _handle_buff_status_bit(bit, &ep_pool[i]); } } } - if ( remaining_buffers ) - { + if (remaining_buffers) { panic("Unhandled buffer %d\n", remaining_buffers); } } @@ -220,7 +206,7 @@ static void __tusb_irq_path_func(hcd_rp2040_irq)(void) { handled |= USB_INTS_BUFF_STATUS_BITS; TU_LOG(2, "Buffer complete\r\n"); - hw_handle_buff_status(); + handle_hwbuf_status(); } if ( status & USB_INTS_TRANS_COMPLETE_BITS ) @@ -240,8 +226,8 @@ static void __tusb_irq_path_func(hcd_rp2040_irq)(void) if ( status & USB_INTS_ERROR_DATA_SEQ_BITS ) { usb_hw_clear->sie_status = USB_SIE_STATUS_DATA_SEQ_ERROR_BITS; - TU_LOG(3, " Seq Error: [0] = 0x%04u [1] = 0x%04x\r\n", tu_u32_low16(*hw_endpoint_get_buf_ctrl(&epx)), - tu_u32_high16(*hw_endpoint_get_buf_ctrl(&epx))); + TU_LOG(3, " Seq Error: [0] = 0x%04u [1] = 0x%04x\r\n", tu_u32_low16(*hwbuf_ctrl_reg_host(&epx)), + tu_u32_high16(*hwbuf_ctrl_reg_host(&epx))); panic("Data Seq Error \n"); } @@ -322,10 +308,8 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t assert(!(dpram_offset & 0b111111)); // Fill in endpoint control register with buffer offset - uint32_t ep_reg = EP_CTRL_ENABLE_BITS - | EP_CTRL_INTERRUPT_PER_BUFFER - | (ep->transfer_type << EP_CTRL_BUFFER_TYPE_LSB) - | dpram_offset; + uint32_t ep_reg = EP_CTRL_ENABLE_BITS | EP_CTRL_INTERRUPT_PER_BUFFER | + ((uint)transfer_type << EP_CTRL_BUFFER_TYPE_LSB) | dpram_offset; if ( bmInterval ) { ep_reg |= (uint32_t) ((bmInterval - 1) << EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB); diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 798129e0c..9c9255518 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -156,11 +156,12 @@ void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) const tusb_dir_t dir = tu_edpt_dir(ep->ep_addr); bool is_rx; + bool is_host = false; io_rw_32 *ep_ctrl_reg; io_rw_32 *buf_ctrl_reg; #if CFG_TUH_ENABLED - const bool is_host = rp2usb_is_host_mode(); + is_host = rp2usb_is_host_mode(); if (is_host) { buf_ctrl_reg = hwbuf_ctrl_reg_host(ep); ep_ctrl_reg = hwep_ctrl_reg_host(ep); @@ -185,7 +186,7 @@ void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) // NOTE: this could happen to Host mode IN endpoint Also, Host mode "interrupt" endpoint hardware is only single // buffered, // NOTE2: Currently Host bulk is implemented using "interrupt" endpoint - const bool force_single = is_rx; + const bool force_single = (!is_host && is_rx) || (is_host && tu_edpt_number(ep->ep_addr) != 0); if (ep->remaining_len && !force_single) { // Use buffer 1 (double buffered) if there is still data -- cgit v1.3.1 From 64ca0b9d58e1ca268a8bae341499311388af7566 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 8 Jan 2026 16:06:58 +0700 Subject: host device info print no serial as 0 instead of n/a --- examples/dual/host_info_to_device_cdc/src/main.c | 7 +++---- examples/host/device_info/src/main.c | 9 ++++----- 2 files changed, 7 insertions(+), 9 deletions(-) diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 00d059b66..fffb54d58 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -246,10 +246,9 @@ static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_devi cdc_printf("Device %u: ID %04x:%04x SN ", daddr, desc_device->idVendor, desc_device->idProduct); uint8_t xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); if (XFER_RESULT_SUCCESS != xfer_result) { - serial[0] = 'n'; - serial[1] = '/'; - serial[2] = 'a'; - serial[3] = 0; + serial[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * 1 + 2)); + serial[1] = '0'; + serial[2] = 0; } print_utf16(serial, TU_ARRAY_SIZE(serial)); cdc_printf("\r\n"); diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 5b914a2ee..ab617e989 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -130,11 +130,10 @@ void tuh_mount_cb(uint8_t daddr) { } if (XFER_RESULT_SUCCESS != xfer_result) { uint16_t* serial = (uint16_t*)(uintptr_t) desc.serial; - serial[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * 3 + 2)); - serial[1] = 'n'; - serial[2] = '/'; - serial[3] = 'a'; - serial[4] = 0; + + serial[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * 1 + 2)); + serial[1] = '0'; // simply 0 + serial[2] = 0; } print_utf16((uint16_t*)(uintptr_t) desc.serial, sizeof(desc.serial)/2); printf("\r\n"); -- cgit v1.3.1 From 0b970e6a6633f703acb0f40b52b741cf492ff166 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 9 Jan 2026 00:08:43 +0700 Subject: only apply errata E5 and E15 for rp2040. rp2350 already fixes these --- hw/bsp/rp2040/family.cmake | 6 +- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 14 ++-- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 119 ++++++++++----------------- src/portable/raspberrypi/rp2040/rp2040_usb.c | 25 +++--- src/portable/raspberrypi/rp2040/rp2040_usb.h | 67 +++++++++------ 5 files changed, 109 insertions(+), 122 deletions(-) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 1602e35eb..9dc28fc70 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -126,7 +126,7 @@ target_compile_definitions(tinyusb_host_base INTERFACE #------------------------------------ # Host MAX3421 -#------------------------------------ +#------------------------------------1 add_library(tinyusb_host_max3421 INTERFACE) target_sources(tinyusb_host_max3421 INTERFACE ${TOP}/src/portable/analog/max3421/hcd_max3421.c @@ -157,10 +157,12 @@ target_link_libraries(tinyusb_bsp INTERFACE # tinyusb_additions will hold our extra settings for examples add_library(tinyusb_additions INTERFACE) +if (PICO_PLATFORM STREQUAL rp2040) target_compile_definitions(tinyusb_additions INTERFACE PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1 PICO_RP2040_USB_DEVICE_UFRAME_FIX=1 -) + ) +endif () if(LOGGER STREQUAL "RTT" OR LOGGER STREQUAL "rtt") target_compile_definitions(tinyusb_additions INTERFACE diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 952245cb1..bdd0d1728 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -92,6 +92,12 @@ static void hw_endpoint_init(hw_endpoint_t *ep, uint8_t ep_addr, uint16_t wMaxPa // double buffered Bulk endpoint if (transfer_type == TUSB_XFER_BULK) { size *= 2u; + + #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX + if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { + ep->e15_bulk_in = true; + } + #endif } // assign buffer @@ -221,17 +227,14 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { struct hw_endpoint *ep = hw_endpoint_get(i, TUSB_DIR_IN); // Active Bulk IN endpoint requires SOF - if ((ep->transfer_type == TUSB_XFER_BULK) && ep->active) { + if (ep->e15_bulk_in && ep->active) { keep_sof_alive = true; hw_endpoint_lock_update(ep, 1); - - // Deferred enable? if (ep->pending) { ep->pending = 0; hw_endpoint_start_next_buffer(ep); } - hw_endpoint_lock_update(ep, -1); } } @@ -292,7 +295,7 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { dcd_event_bus_reset(0, TUSB_SPEED_FULL, true); usb_hw_clear->sie_status = USB_SIE_STATUS_BUS_RESET_BITS; -#if TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX + #if TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX // Only run enumeration workaround if pull up is enabled if (usb_hw->sie_ctrl & USB_SIE_CTRL_PULLUP_EN_BITS) { rp2040_usb_device_enumeration_fix(); @@ -491,7 +494,6 @@ bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) void dcd_edpt_close_all(uint8_t rhport) { (void) rhport; - // may need to use EP Abort reset_non_control_endpoints(); } diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index db3a81c87..1193009ef 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -82,15 +82,13 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t dev_speed(void) { return (usb_hw->sie_status & USB_SIE_STATUS_SPEED_BITS) >> USB_SIE_STATUS_SPEED_LSB; } -TU_ATTR_ALWAYS_INLINE static inline bool need_pre(uint8_t dev_addr) -{ +TU_ATTR_ALWAYS_INLINE static inline bool need_pre(uint8_t dev_addr) { // If this device is different to the speed of the root device // (i.e. is a low speed device on a full speed hub) then need pre return hcd_port_speed_get(0) != tuh_speed_get(dev_addr); } -static void __tusb_irq_path_func(hw_xfer_complete)(struct hw_endpoint *ep, xfer_result_t xfer_result) -{ +static void __tusb_irq_path_func(hw_xfer_complete)(struct hw_endpoint *ep, xfer_result_t xfer_result) { // Mark transfer as done before we tell the tinyusb stack uint8_t dev_addr = ep->dev_addr; uint8_t ep_addr = ep->ep_addr; @@ -99,35 +97,28 @@ static void __tusb_irq_path_func(hw_xfer_complete)(struct hw_endpoint *ep, xfer_ hcd_event_xfer_complete(dev_addr, ep_addr, xferred_len, xfer_result, true); } -static void __tusb_irq_path_func(_handle_buff_status_bit)(uint bit, struct hw_endpoint *ep) { +static void __tusb_irq_path_func(handle_hhwbuf_status_bit)(uint bit, struct hw_endpoint *ep) { usb_hw_clear->buf_status = bit; - // EP may have been stalled? - assert(ep->active); - bool done = hw_endpoint_xfer_continue(ep); - if ( done ) - { + const bool done = hw_endpoint_xfer_continue(ep); + if (done) { hw_xfer_complete(ep, XFER_RESULT_SUCCESS); } } static void __tusb_irq_path_func(handle_hwbuf_status)(void) { - uint32_t remaining_buffers = usb_hw->buf_status; - pico_trace("buf_status 0x%08lx\n", remaining_buffers); + uint32_t buf_status = usb_hw->buf_status; + pico_trace("buf_status 0x%08lx\n", buf_status); // Check EPX first uint bit = 0b1; - if (remaining_buffers & bit) { - remaining_buffers &= ~bit; + if (buf_status & bit) { + buf_status &= ~bit; struct hw_endpoint * ep = &epx; - - // uint32_t ep_ctrl = *hwep_ctrl_reg_host(ep); - // TU_LOG_HEX(3, ep_ctrl); - - _handle_buff_status_bit(bit, ep); + handle_hhwbuf_status_bit(bit, ep); } // Check "interrupt" (asynchronous) endpoints for both IN and OUT - for (uint i = 1; i <= USB_HOST_INTERRUPT_ENDPOINTS && remaining_buffers; i++) { + for (uint i = 1; i <= USB_HOST_INTERRUPT_ENDPOINTS && buf_status; i++) { // EPX is bit 0 & 1 // IEP1 IN is bit 2 // IEP1 OUT is bit 3 @@ -138,15 +129,15 @@ static void __tusb_irq_path_func(handle_hwbuf_status)(void) { // etc for (uint j = 0; j < 2; j++) { bit = 1 << (i * 2 + j); - if (remaining_buffers & bit) { - remaining_buffers &= ~bit; - _handle_buff_status_bit(bit, &ep_pool[i]); + if (buf_status & bit) { + buf_status &= ~bit; + handle_hhwbuf_status_bit(bit, &ep_pool[i]); } } } - if (remaining_buffers) { - panic("Unhandled buffer %d\n", remaining_buffers); + if (buf_status) { + panic("Unhandled buffer %d\n", buf_status); } } @@ -251,7 +242,7 @@ static struct hw_endpoint *_next_free_interrupt_ep(void) ep = &ep_pool[i]; if ( !ep->configured ) { - // Will be configured by _hw_endpoint_init / _hw_endpoint_allocate + // Will be configured by hw_endpoint_init / hw_endpoint_allocate ep->interrupt_num = (uint8_t) (i - 1); return ep; } @@ -259,12 +250,13 @@ static struct hw_endpoint *_next_free_interrupt_ep(void) return ep; } -static struct hw_endpoint *_hw_endpoint_allocate(uint8_t transfer_type) -{ - struct hw_endpoint * ep = NULL; +static hw_endpoint_t *hw_endpoint_allocate(uint8_t transfer_type) { + hw_endpoint_t *ep = NULL; - if ( transfer_type != TUSB_XFER_CONTROL ) - { + if (transfer_type == TUSB_XFER_CONTROL) { + ep = &epx; + ep->hw_data_buf = &usbh_dpram->epx_data[0]; + } else { // Note: even though datasheet name these "Interrupt" endpoints. These are actually // "Asynchronous" endpoints and can be used for other type such as: Bulk (ISO need confirmation) ep = _next_free_interrupt_ep(); @@ -276,17 +268,12 @@ static struct hw_endpoint *_hw_endpoint_allocate(uint8_t transfer_type) // etc ep->hw_data_buf = &usbh_dpram->epx_data[64 * (ep->interrupt_num + 2)]; } - else - { - ep = &epx; - ep->hw_data_buf = &usbh_dpram->epx_data[0]; - } return ep; } -static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t ep_addr, uint16_t wMaxPacketSize, uint8_t transfer_type, uint8_t bmInterval) -{ +static void hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t ep_addr, uint16_t wMaxPacketSize, + uint8_t transfer_type, uint8_t bmInterval) { // Already has data buffer, endpoint control, and buffer control allocated at this point assert(ep->hw_data_buf); @@ -299,7 +286,6 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t // Response to a setup packet on EP0 starts with pid of 1 ep->next_pid = (num == 0 ? 1u : 0u); ep->wMaxPacketSize = wMaxPacketSize; - ep->transfer_type = transfer_type; pico_trace("hw_endpoint_init dev %d ep %02X xfer %d\n", ep->dev_addr, ep->ep_addr, ep->transfer_type); pico_trace("dev %d ep %02X setup buffer @ 0x%p\n", ep->dev_addr, ep->ep_addr, ep->hw_data_buf); @@ -463,46 +449,33 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { } } -uint32_t hcd_frame_number(uint8_t rhport) -{ - (void) rhport; +uint32_t hcd_frame_number(uint8_t rhport) { + (void)rhport; return usb_hw->sof_rd; } -void hcd_int_enable(uint8_t rhport) -{ - (void) rhport; - assert(rhport == 0); +void hcd_int_enable(uint8_t rhport) { + (void)rhport; irq_set_enabled(USBCTRL_IRQ, true); } -void hcd_int_disable(uint8_t rhport) -{ - (void) rhport; +void hcd_int_disable(uint8_t rhport) { + (void)rhport; // todo we should check this is disabling from the correct core; note currently this is never called - assert(rhport == 0); irq_set_enabled(USBCTRL_IRQ, false); } //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; - +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t *ep_desc) { + (void)rhport; pico_trace("hcd_edpt_open dev_addr %d, ep_addr %d\n", dev_addr, ep_desc->bEndpointAddress); - - // Allocated differently based on if it's an interrupt endpoint or not - struct hw_endpoint *ep = _hw_endpoint_allocate(ep_desc->bmAttributes.xfer); + hw_endpoint_t *ep = hw_endpoint_allocate(ep_desc->bmAttributes.xfer); TU_ASSERT(ep); - _hw_endpoint_init(ep, - dev_addr, - ep_desc->bEndpointAddress, - tu_edpt_packet_size(ep_desc), - ep_desc->bmAttributes.xfer, - ep_desc->bInterval); + hw_endpoint_init(ep, dev_addr, ep_desc->bEndpointAddress, tu_edpt_packet_size(ep_desc), ep_desc->bmAttributes.xfer, + ep_desc->bInterval); return true; } @@ -512,13 +485,12 @@ bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { return false; // TODO not implemented yet } -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) -{ +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) { (void) rhport; pico_trace("hcd_edpt_xfer dev_addr %d, ep_addr 0x%x, len %d\n", dev_addr, ep_addr, buflen); - uint8_t const ep_num = tu_edpt_number(ep_addr); + const uint8_t ep_num = tu_edpt_number(ep_addr); tusb_dir_t const ep_dir = tu_edpt_dir(ep_addr); // Get appropriate ep. Either EPX or interrupt endpoint @@ -530,19 +502,17 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * assert(!ep->active); // Control endpoint can change direction 0x00 <-> 0x80 - if ( ep_addr != ep->ep_addr ) - { + if (ep_addr != ep->ep_addr) { assert(ep_num == 0); // Direction has flipped on endpoint control so re init it but with same properties - _hw_endpoint_init(ep, dev_addr, ep_addr, ep->wMaxPacketSize, ep->transfer_type, 0); + hw_endpoint_init(ep, dev_addr, ep_addr, ep->wMaxPacketSize, TUSB_XFER_CONTROL, 0); } // If a normal transfer (non-interrupt) then initiate using // sie ctrl registers. Otherwise, interrupt ep registers should // already be configured - if ( ep == &epx ) - { + if (ep == &epx) { hw_endpoint_xfer_start(ep, buffer, buflen); // That has set up buffer control, endpoint control etc @@ -558,8 +528,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * usb_hw->sie_ctrl = flags & ~USB_SIE_CTRL_START_TRANS_BITS; busy_wait_at_least_cycles(12); usb_hw->sie_ctrl = flags; - }else - { + } else { hw_endpoint_xfer_start(ep, buffer, buflen); } @@ -584,14 +553,14 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet } // Configure EP0 struct with setup info for the trans complete - struct hw_endpoint * ep = _hw_endpoint_allocate( (uint8_t) TUSB_XFER_CONTROL); + hw_endpoint_t *ep = hw_endpoint_allocate((uint8_t)TUSB_XFER_CONTROL); TU_ASSERT(ep); // EPX should be inactive assert(!ep->active); // EP0 out - _hw_endpoint_init(ep, dev_addr, 0x00, ep->wMaxPacketSize, 0, 0); + hw_endpoint_init(ep, dev_addr, 0x00, ep->wMaxPacketSize, 0, 0); assert(ep->configured); ep->remaining_len = 8; diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 9c9255518..8f91ecf22 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -38,10 +38,8 @@ static void hwep_xfer_sync(hw_endpoint_t *ep); #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX -static bool e15_is_bulkin_ep(struct hw_endpoint *ep); static bool e15_is_critical_frame_period(struct hw_endpoint *ep); #else - #define e15_is_bulkin_ep(x) (false) #define e15_is_critical_frame_period(x) (false) #endif @@ -228,13 +226,16 @@ void hw_endpoint_xfer_start(struct hw_endpoint* ep, uint8_t* buffer, uint16_t to ep->active = true; ep->user_buf = buffer; - if (e15_is_bulkin_ep(ep)) { + #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX + if (ep->e15_bulk_in) { usb_hw_set->inte = USB_INTS_DEV_SOF_BITS; } if (e15_is_critical_frame_period(ep)) { - ep->pending = 1; - } else { + ep->pending = 1; // skip transfer if we are in critical frame period + } else + #endif + { hw_endpoint_start_next_buffer(ep); } @@ -360,9 +361,12 @@ bool __tusb_irq_path_func(hw_endpoint_xfer_continue)(struct hw_endpoint* ep) { hw_endpoint_lock_update(ep, -1); return true; } else { + #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX if (e15_is_critical_frame_period(ep)) { ep->pending = 1; - } else { + } else + #endif + { hw_endpoint_start_next_buffer(ep); } } @@ -397,15 +401,12 @@ bool __tusb_irq_path_func(hw_endpoint_xfer_continue)(struct hw_endpoint* ep) { volatile uint32_t e15_last_sof = 0; -// check if Errata 15 is needed for this endpoint i.e device bulk-in -static bool __tusb_irq_path_func(e15_is_bulkin_ep)(struct hw_endpoint *ep) { - return (!rp2usb_is_host_mode() && tu_edpt_dir(ep->ep_addr) == TUSB_DIR_IN && ep->transfer_type == TUSB_XFER_BULK); -} - // check if we need to apply Errata 15 workaround : i.e // Endpoint is BULK IN and is currently in critical frame period i.e 20% of last usb frame static bool __tusb_irq_path_func(e15_is_critical_frame_period)(struct hw_endpoint* ep) { - TU_VERIFY(e15_is_bulkin_ep(ep)); + if (!ep->e15_bulk_in) { + return false; + } /* Avoid the last 200us (uframe 6.5-7) of a frame, up to the EOF2 point. * The device state machine cannot recover from receiving an incorrect PID diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h index 368bb6509..944d604bc 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.h +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h @@ -13,17 +13,30 @@ #error TinyUSB device and host mode not supported at the same time #endif -#if defined(PICO_RP2040_USB_DEVICE_ENUMERATION_FIX) && !defined(TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX) -#define TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX PICO_RP2040_USB_DEVICE_ENUMERATION_FIX +// E5 and E15 only apply to RP2040 +#if defined(PICO_RP2040) && PICO_RP2040 == 1 + // RP2040 E5: USB device fails to exit RESET state on busy USB bus. + #if defined(PICO_RP2040_USB_DEVICE_ENUMERATION_FIX) && !defined(TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX) + #define TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX PICO_RP2040_USB_DEVICE_ENUMERATION_FIX + #endif + + // RP2040 E15: USB Device controller will hang if certain bus errors occur during an IN transfer. + #if defined(PICO_RP2040_USB_DEVICE_UFRAME_FIX) && !defined(TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX) + #define TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX PICO_RP2040_USB_DEVICE_UFRAME_FIX + #endif #endif -#if defined(PICO_RP2040_USB_DEVICE_UFRAME_FIX) && !defined(TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX) -#define TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX PICO_RP2040_USB_DEVICE_UFRAME_FIX +#ifndef TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX + #define TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX 0 +#endif + +#ifndef TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX + #define TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX 0 #endif #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX -#undef PICO_RP2040_USB_FAST_IRQ -#define PICO_RP2040_USB_FAST_IRQ 1 + #undef PICO_RP2040_USB_FAST_IRQ + #define PICO_RP2040_USB_FAST_IRQ 1 #endif #ifndef PICO_RP2040_USB_FAST_IRQ @@ -46,36 +59,36 @@ #define pico_trace(...) TU_LOG(3, __VA_ARGS__) // Hardware information per endpoint -typedef struct hw_endpoint -{ - uint8_t ep_addr; - uint8_t next_pid; - // Interrupt, bulk, etc - uint8_t transfer_type; +typedef struct hw_endpoint { + uint8_t ep_addr; + uint8_t next_pid; + uint8_t transfer_type; - bool active; // Endpoint is in use - uint8_t pending; // Transfer scheduled but not active + bool active; // transferring data - uint16_t wMaxPacketSize; +#if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX + bool e15_bulk_in; // Errata15 device bulk in + uint8_t pending; // Transfer scheduled but not active +#endif - uint8_t *hw_data_buf; // Buffer pointer in usb dpram + uint16_t wMaxPacketSize; + uint8_t *hw_data_buf; // Buffer pointer in usb dpram - // Current transfer information - uint8_t *user_buf; // User buffer in main memory - uint16_t remaining_len; - uint16_t xferred_len; + // Current transfer information + uint8_t *user_buf; // User buffer in main memory + uint16_t remaining_len; + uint16_t xferred_len; #if CFG_TUH_ENABLED - // Is this a valid struct - bool configured; + // Is this a valid struct + bool configured; - // Only needed for host - uint8_t dev_addr; + // Only needed for host + uint8_t dev_addr; - // If interrupt endpoint - uint8_t interrupt_num; + // If interrupt endpoint + uint8_t interrupt_num; #endif - } hw_endpoint_t; #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX -- cgit v1.3.1 From 39901ac89c92ba9c2cb5890cd898659bc0f13f53 Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Thu, 8 Jan 2026 18:36:31 +0100 Subject: Fix tipo in tusb_option.h --- src/tusb_option.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/tusb_option.h b/src/tusb_option.h index 08a0ba2ef..a64ea27be 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -742,7 +742,7 @@ #define CFG_TUH_CDC_PL2303 0 #endif -#ifndef CFG_TUH_CDC_PL2303_VID_PID_QUIRKS_LIST +#ifndef CFG_TUH_CDC_PL2303_VID_PID_LIST // List of product IDs that can use the PL2303 CDC driver #define CFG_TUH_CDC_PL2303_VID_PID_LIST \ { 0x067b, 0x2303 }, /* initial 2303 */ \ -- cgit v1.3.1 From e69494d94a680c7b5aa5310338c206921d57640b Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 9 Jan 2026 10:47:50 +0700 Subject: fix pre-commit, clean up tusb_mcu.h, add at32f45x to ci build --- .github/workflows/ci_set_matrix.py | 3 ++- hw/bsp/at32f45x/at32f45x_clock.c | 2 +- hw/bsp/at32f45x/at32f45x_clock.h | 1 - hw/bsp/at32f45x/at32f45x_int.c | 1 - hw/bsp/at32f45x/at32f45x_int.h | 1 - src/common/tusb_mcu.h | 22 +--------------------- 6 files changed, 4 insertions(+), 26 deletions(-) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index c276d5253..237a34b9f 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -15,7 +15,8 @@ toolchain_list = [ # family: [supported toolchain] family_list = { - "at32f402_405 at32f403a_407 at32f413 at32f415 at32f423 at32f425 at32f435_437 broadcom_32bit da1469x": ["arm-gcc"], + "at32f45x at32f402_405 at32f403a_407 at32f413 at32f415 at32f423 at32f425 at32f435_437 broadcom_32bit da1469x": [ + "arm-gcc"], "broadcom_64bit": ["aarch64-gcc"], "ch32v10x ch32v20x ch32v30x fomu gd32vf103 hpmicro": ["riscv-gcc"], "imxrt": ["arm-gcc", "arm-clang"], diff --git a/hw/bsp/at32f45x/at32f45x_clock.c b/hw/bsp/at32f45x/at32f45x_clock.c index 12003cf5a..a6724e23f 100644 --- a/hw/bsp/at32f45x/at32f45x_clock.c +++ b/hw/bsp/at32f45x/at32f45x_clock.c @@ -55,7 +55,7 @@ void system_clock_config(void) /* enable pwc periph clock */ crm_periph_clock_enable(CRM_PWC_PERIPH_CLOCK, TRUE); - + /* config ldo voltage */ pwc_ldo_output_voltage_set(PWC_LDO_OUTPUT_1V3); diff --git a/hw/bsp/at32f45x/at32f45x_clock.h b/hw/bsp/at32f45x/at32f45x_clock.h index 1fd2035aa..a372a605b 100644 --- a/hw/bsp/at32f45x/at32f45x_clock.h +++ b/hw/bsp/at32f45x/at32f45x_clock.h @@ -42,4 +42,3 @@ void system_clock_config(void); #endif #endif - diff --git a/hw/bsp/at32f45x/at32f45x_int.c b/hw/bsp/at32f45x/at32f45x_int.c index 15798e381..15ff90c64 100644 --- a/hw/bsp/at32f45x/at32f45x_int.c +++ b/hw/bsp/at32f45x/at32f45x_int.c @@ -98,4 +98,3 @@ void DebugMon_Handler(void) /** * @} */ - diff --git a/hw/bsp/at32f45x/at32f45x_int.h b/hw/bsp/at32f45x/at32f45x_int.h index 64930f29e..3a2667e9d 100644 --- a/hw/bsp/at32f45x/at32f45x_int.h +++ b/hw/bsp/at32f45x/at32f45x_int.h @@ -57,4 +57,3 @@ void OTGFS1_WKUP_IRQHandler(void); #endif #endif - diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index cbdcd2dfc..5b9497b9a 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -635,17 +635,7 @@ #define TUP_USBIP_DWC2_AT32 #define TUP_DCD_ENDPOINT_MAX 4 -#elif TU_CHECK_MCU(OPT_MCU_AT32F435_437) - #define TUP_USBIP_DWC2 - #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 - -#elif TU_CHECK_MCU(OPT_MCU_AT32F423) - #define TUP_USBIP_DWC2 - #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 - -#elif TU_CHECK_MCU(OPT_MCU_AT32F402_405) +#elif TU_CHECK_MCU(OPT_MCU_AT32F402_405, OPT_MCU_AT32F423, OPT_MCU_AT32F425, OPT_MCU_AT32F435_437, OPT_MCU_AT32F45X) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 #define TUP_DCD_ENDPOINT_MAX 8 @@ -657,16 +647,6 @@ #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS #endif -#elif TU_CHECK_MCU(OPT_MCU_AT32F425) - #define TUP_USBIP_DWC2 - #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 - -#elif TU_CHECK_MCU(OPT_MCU_AT32F45X) - #define TUP_USBIP_DWC2 - #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 - //--------------------------------------------------------------------+ // HPMicro //--------------------------------------------------------------------+ -- cgit v1.3.1 From 9465ce985bcf5732795d2aea5df4fd6315896cf9 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 9 Jan 2026 11:01:58 +0700 Subject: apply copilot suggestion --- hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/at32f45x/at32f45x_clock.c | 2 +- hw/bsp/at32f45x/at32f45x_int.c | 4 ++-- hw/bsp/at32f45x/family.c | 4 ++-- tools/build.py | 4 +++- 5 files changed, 9 insertions(+), 7 deletions(-) diff --git a/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h index 8a9906d39..7a4393ad7 100644 --- a/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h @@ -49,7 +49,7 @@ #endif -/* Cortex M23/M33 port configuration. */ +/* Cortex-M4 port configuration. */ #define configENABLE_MPU 0 #define configENABLE_FPU 1 #define configENABLE_TRUSTZONE 0 diff --git a/hw/bsp/at32f45x/at32f45x_clock.c b/hw/bsp/at32f45x/at32f45x_clock.c index a6724e23f..a66a8b1aa 100644 --- a/hw/bsp/at32f45x/at32f45x_clock.c +++ b/hw/bsp/at32f45x/at32f45x_clock.c @@ -53,7 +53,7 @@ void system_clock_config(void) /* set the flash clock divider */ flash_psr_set(FLASH_WAIT_CYCLE_5); - /* enable pwc periph clock */ + /* enable pwc periph clock */ crm_periph_clock_enable(CRM_PWC_PERIPH_CLOCK, TRUE); /* config ldo voltage */ diff --git a/hw/bsp/at32f45x/at32f45x_int.c b/hw/bsp/at32f45x/at32f45x_int.c index 15ff90c64..b3ba6ad9c 100644 --- a/hw/bsp/at32f45x/at32f45x_int.c +++ b/hw/bsp/at32f45x/at32f45x_int.c @@ -26,11 +26,11 @@ /* includes ------------------------------------------------------------------*/ #include "at32f45x_int.h" -/** @addtogroup AT32F455_periph_examples +/** @addtogroup AT32F45X_BSP * @{ */ -/** @addtogroup 455_USB_device_keyboard +/** @addtogroup AT32F45X_USB_Device_Keyboard * @{ */ diff --git a/hw/bsp/at32f45x/family.c b/hw/bsp/at32f45x/family.c index 32bae96af..79da6aec2 100644 --- a/hw/bsp/at32f45x/family.c +++ b/hw/bsp/at32f45x/family.c @@ -202,7 +202,7 @@ int board_uart_read(uint8_t *buf, int len) { int board_uart_write(void const *buf, int len) { #if CFG_TUSB_OS == OPT_OS_NONE int txsize = len; - u16 timeout = 0xffff; + uint16_t timeout = 0xffff; while (txsize--) { while (usart_flag_get(PRINT_UART, USART_TDBE_FLAG) == RESET) { timeout--; @@ -252,7 +252,7 @@ void _init(void) { void assert_failed(const char *file, uint32_t line) { /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, - tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + e.g.: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */ diff --git a/tools/build.py b/tools/build.py index 87064b7a0..d22d06a0b 100755 --- a/tools/build.py +++ b/tools/build.py @@ -40,7 +40,9 @@ ci_skip_boards = { } ci_preferred_boards = { - 'stm32h7': ['stm32h743eval'], + 'samd2x_l2x': ['metro_m0_express'], + 'samd5x_e5x': ['metro_m4_express'], + 'stm32h7': ['stm32h743eval'] } -- cgit v1.3.1 From 6ab368f655f8aff3bf684066af85ccd4287aadad Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 9 Jan 2026 11:22:55 +0700 Subject: fix missing SystemCoreClock --- hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h | 3 +-- hw/bsp/at32f45x/family.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h index 7a4393ad7..c5b89452e 100644 --- a/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/at32f45x/FreeRTOSConfig/FreeRTOSConfig.h @@ -46,7 +46,6 @@ #ifndef __IASMARM__ // Include MCU header #include "at32f45x.h" - #endif /* Cortex-M4 port configuration. */ @@ -57,7 +56,7 @@ #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock +#define configCPU_CLOCK_HZ system_core_clock #define configTICK_RATE_HZ ( 1000 ) #define configMAX_PRIORITIES ( 5 ) #define configMINIMAL_STACK_SIZE ( 128 ) diff --git a/hw/bsp/at32f45x/family.c b/hw/bsp/at32f45x/family.c index 79da6aec2..0593e5115 100644 --- a/hw/bsp/at32f45x/family.c +++ b/hw/bsp/at32f45x/family.c @@ -64,7 +64,7 @@ void board_init(void) { /* configure systick */ systick_clock_source_config(SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV); - SysTick_Config(SystemCoreClock / 1000); + SysTick_Config(system_core_clock / 1000); #if CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) NVIC_SetPriority(OTG_IRQ, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -- cgit v1.3.1 From 8452dfe3055c876a1c8cb1f52c7bceeae6678452 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 9 Jan 2026 10:28:27 +0700 Subject: clean up --- .idea/debugServers/mcxa153.xml | 13 ++++++++++ .idea/debugServers/ra6m1.xml | 13 ++++++++++ .idea/debugServers/ra6m5.xml | 13 ++++++++++ .idea/debugServers/rt1011.xml | 13 ++++++++++ .idea/debugServers/rt1170.xml | 13 ++++++++++ .idea/debugServers/stm32f072.xml | 13 ++++++++++ .idea/debugServers/stm32f303.xml | 13 ++++++++++ .idea/debugServers/stm32l053.xml | 13 ++++++++++ hw/bsp/rp2040/family.cmake | 2 +- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 4 ++-- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 36 +++++++++++++--------------- src/tusb_option.h | 2 +- 12 files changed, 125 insertions(+), 23 deletions(-) create mode 100644 .idea/debugServers/mcxa153.xml create mode 100644 .idea/debugServers/ra6m1.xml create mode 100644 .idea/debugServers/ra6m5.xml create mode 100644 .idea/debugServers/rt1011.xml create mode 100644 .idea/debugServers/rt1170.xml create mode 100644 .idea/debugServers/stm32f072.xml create mode 100644 .idea/debugServers/stm32f303.xml create mode 100644 .idea/debugServers/stm32l053.xml diff --git a/.idea/debugServers/mcxa153.xml b/.idea/debugServers/mcxa153.xml new file mode 100644 index 000000000..0e493cbd5 --- /dev/null +++ b/.idea/debugServers/mcxa153.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/ra6m1.xml b/.idea/debugServers/ra6m1.xml new file mode 100644 index 000000000..17c902ec4 --- /dev/null +++ b/.idea/debugServers/ra6m1.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/ra6m5.xml b/.idea/debugServers/ra6m5.xml new file mode 100644 index 000000000..d8dfbdeeb --- /dev/null +++ b/.idea/debugServers/ra6m5.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/rt1011.xml b/.idea/debugServers/rt1011.xml new file mode 100644 index 000000000..b4be501bd --- /dev/null +++ b/.idea/debugServers/rt1011.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/rt1170.xml b/.idea/debugServers/rt1170.xml new file mode 100644 index 000000000..9a564ed57 --- /dev/null +++ b/.idea/debugServers/rt1170.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/stm32f072.xml b/.idea/debugServers/stm32f072.xml new file mode 100644 index 000000000..c56f5a8fb --- /dev/null +++ b/.idea/debugServers/stm32f072.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/stm32f303.xml b/.idea/debugServers/stm32f303.xml new file mode 100644 index 000000000..84aafc1e3 --- /dev/null +++ b/.idea/debugServers/stm32f303.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/stm32l053.xml b/.idea/debugServers/stm32l053.xml new file mode 100644 index 000000000..5365189cc --- /dev/null +++ b/.idea/debugServers/stm32l053.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 9dc28fc70..40eee082d 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -126,7 +126,7 @@ target_compile_definitions(tinyusb_host_base INTERFACE #------------------------------------ # Host MAX3421 -#------------------------------------1 +#------------------------------------ add_library(tinyusb_host_max3421 INTERFACE) target_sources(tinyusb_host_max3421 INTERFACE ${TOP}/src/portable/analog/max3421/hcd_max3421.c diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index bdd0d1728..71d5cf19c 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -39,9 +39,9 @@ #include "device/dcd.h" // Current implementation force vbus detection as always present, causing device think it is always plugged into host. -// Therefore it cannot detect disconnect event, mistaken it as suspend. +// Therefore, it cannot detect disconnect event, mistaken it as suspend. // Note: won't work if change to 0 (for now) -#define FORCE_VBUS_DETECT 1 + #define FORCE_VBUS_DETECT 1 #define USB_INTS_ERROR_BITS \ (USB_INTS_ERROR_DATA_SEQ_BITS | USB_INTS_ERROR_BIT_STUFF_BITS | USB_INTS_ERROR_CRC_BITS | \ diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 1193009ef..7bf247ced 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -97,7 +97,7 @@ static void __tusb_irq_path_func(hw_xfer_complete)(struct hw_endpoint *ep, xfer_ hcd_event_xfer_complete(dev_addr, ep_addr, xferred_len, xfer_result, true); } -static void __tusb_irq_path_func(handle_hhwbuf_status_bit)(uint bit, struct hw_endpoint *ep) { +static void __tusb_irq_path_func(handle_hwbuf_status_bit)(uint bit, struct hw_endpoint *ep) { usb_hw_clear->buf_status = bit; const bool done = hw_endpoint_xfer_continue(ep); if (done) { @@ -110,11 +110,11 @@ static void __tusb_irq_path_func(handle_hwbuf_status)(void) { pico_trace("buf_status 0x%08lx\n", buf_status); // Check EPX first - uint bit = 0b1; + uint32_t bit = 1u; if (buf_status & bit) { buf_status &= ~bit; struct hw_endpoint * ep = &epx; - handle_hhwbuf_status_bit(bit, ep); + handle_hwbuf_status_bit(bit, ep); } // Check "interrupt" (asynchronous) endpoints for both IN and OUT @@ -131,7 +131,7 @@ static void __tusb_irq_path_func(handle_hwbuf_status)(void) { bit = 1 << (i * 2 + j); if (buf_status & bit) { buf_status &= ~bit; - handle_hhwbuf_status_bit(bit, &ep_pool[i]); + handle_hwbuf_status_bit(bit, &ep_pool[i]); } } } @@ -287,39 +287,37 @@ static void hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t e ep->next_pid = (num == 0 ? 1u : 0u); ep->wMaxPacketSize = wMaxPacketSize; - pico_trace("hw_endpoint_init dev %d ep %02X xfer %d\n", ep->dev_addr, ep->ep_addr, ep->transfer_type); + pico_trace("hw_endpoint_init dev %d ep %02X xfer %d\n", ep->dev_addr, ep->ep_addr, transfer_type); pico_trace("dev %d ep %02X setup buffer @ 0x%p\n", ep->dev_addr, ep->ep_addr, ep->hw_data_buf); uint dpram_offset = hw_data_offset(ep->hw_data_buf); // Bits 0-5 should be 0 assert(!(dpram_offset & 0b111111)); // Fill in endpoint control register with buffer offset - uint32_t ep_reg = EP_CTRL_ENABLE_BITS | EP_CTRL_INTERRUPT_PER_BUFFER | - ((uint)transfer_type << EP_CTRL_BUFFER_TYPE_LSB) | dpram_offset; - if ( bmInterval ) - { - ep_reg |= (uint32_t) ((bmInterval - 1) << EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB); + uint32_t ctrl_value = EP_CTRL_ENABLE_BITS | EP_CTRL_INTERRUPT_PER_BUFFER | + ((uint32_t)transfer_type << EP_CTRL_BUFFER_TYPE_LSB) | dpram_offset; + if (bmInterval) { + ctrl_value |= (uint32_t)((bmInterval - 1) << EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB); } - *hwep_ctrl_reg_host(ep) = ep_reg; - // pico_trace("endpoint control (0x%p) <- 0x%lx\n", ep->endpoint_control, ep_reg); + + io_rw_32 *ctrl_reg = hwep_ctrl_reg_host(ep); + *ctrl_reg = ctrl_value; + pico_trace("endpoint control (0x%p) <- 0x%lx\n", ctrl_reg, ctrl_value); ep->configured = true; - if ( ep != &epx ) - { + if (ep != &epx) { // Endpoint has its own addr_endp and interrupt bits to be setup! // This is an interrupt/async endpoint. so need to set up ADDR_ENDP register with: // - device address // - endpoint number / direction // - preamble - uint32_t reg = (uint32_t) (dev_addr | (num << USB_ADDR_ENDP1_ENDPOINT_LSB)); + uint32_t reg = (uint32_t)(dev_addr | (num << USB_ADDR_ENDP1_ENDPOINT_LSB)); - if ( dir == TUSB_DIR_OUT ) - { + if (dir == TUSB_DIR_OUT) { reg |= USB_ADDR_ENDP1_INTEP_DIR_BITS; } - if ( need_pre(dev_addr) ) - { + if (need_pre(dev_addr)) { reg |= USB_ADDR_ENDP1_INTEP_PREAMBLE_BITS; } usb_hw->int_ep_addr_ctrl[ep->interrupt_num] = reg; diff --git a/src/tusb_option.h b/src/tusb_option.h index 08a0ba2ef..9b0da3ac7 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -335,7 +335,7 @@ #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 #endif -//------------- pio-usb -------------// +//------------- Raspberry Pi -------------// // Enable PIO-USB software host controller #ifndef CFG_TUH_RPI_PIO_USB #define CFG_TUH_RPI_PIO_USB 0 -- cgit v1.3.1 From 4c86cbdc822ccf0f71a67c5f2d627e18ecbad46f Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 9 Jan 2026 18:40:55 +0700 Subject: enable dedicated hwfifo for rp2 --- src/common/tusb_fifo.c | 76 +++++++++++++++++++------- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 10 +++- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 4 +- src/portable/raspberrypi/rp2040/rp2040_usb.c | 55 +++++++++++++------ src/portable/raspberrypi/rp2040/rp2040_usb.h | 35 ++++++------ src/tusb_option.h | 79 +++++++++++++++------------- 6 files changed, 169 insertions(+), 90 deletions(-) diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index a92435912..9f188f296 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -33,7 +33,7 @@ // Suppress IAR warning // Warning[Pa082]: undefined behavior: the order of volatile accesses is undefined in this statement #if defined(__ICCARM__) -#pragma diag_suppress = Pa082 + #pragma diag_suppress = Pa082 #endif #if OSAL_MUTEX_REQUIRED @@ -110,8 +110,9 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { } //--------------------------------------------------------------------+ -// Pull & Push -// copy data to/from fifo without updating read/write pointers +// Hardware FIFO API +// Support different data access width and address increment scheme +// Can support multiple i.e both 16 and 32-bit data access if needed //--------------------------------------------------------------------+ #if CFG_TUSB_FIFO_HWFIFO_API #if CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE @@ -122,18 +123,31 @@ void tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { #define HWFIFO_ADDR_NEXT(_hwfifo, _const) HWFIFO_ADDR_NEXT_N(_hwfifo, _const, CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE) +//------------- Write -------------// #ifndef CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE -static inline void stride_write(volatile void *hwfifo, const void *src, uint8_t data_stride) { +TU_ATTR_ALWAYS_INLINE static inline void stride_write(volatile void *hwfifo, const void *src, uint8_t data_stride) { + (void)data_stride; // possible unused #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 - if (data_stride == 4) { + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE != 4 + if (data_stride == 4) + #endif + { *((volatile uint32_t *)hwfifo) = tu_unaligned_read32(src); } - #endif - #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 2 - if (data_stride == 2) { + #endif + + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 2 + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE != 2 + if (data_stride == 2) + #endif + { *((volatile uint16_t *)hwfifo) = tu_unaligned_read16(src); } - #endif + #endif + + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE == 1 + *((volatile uint8_t *)hwfifo) = *(const uint8_t *)src; + #endif } // Copy from fifo to fixed address buffer (usually a tx register) with TU_FIFO_FIXED_ADDR_RW32 mode @@ -147,7 +161,8 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, co HWFIFO_ADDR_NEXT(hwfifo, ); } - #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE > 1 + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS // 16-bit access is allowed for odd bytes if (len >= 2) { *((volatile uint16_t *)hwfifo) = tu_unaligned_read16(src); @@ -155,16 +170,16 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, co len -= 2; HWFIFO_ADDR_NEXT_N(hwfifo, , 2); } - #endif + #endif - #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_8BIT_ACCESS + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_8BIT_ACCESS // 8-bit access is allowed for odd bytes while (len > 0) { *((volatile uint8_t *)hwfifo) = *src++; len--; HWFIFO_ADDR_NEXT_N(hwfifo, , 1); } - #else + #else // Write odd bytes i.e 1 byte for 16 bit or 1-3 bytes for 32 bit if (len > 0) { @@ -173,13 +188,16 @@ void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, co stride_write(hwfifo, &tmp, data_stride); HWFIFO_ADDR_NEXT(hwfifo, ); } + #endif #endif } #endif +//------------- Read -------------// #ifndef CFG_TUSB_FIFO_HWFIFO_CUSTOM_READ -static inline void stride_read(const volatile void *hwfifo, void *dest, uint8_t data_stride) { +TU_ATTR_ALWAYS_INLINE static inline void stride_read(const volatile void *hwfifo, void *dest, uint8_t data_stride) { (void)data_stride; // possible unused + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE & 4 #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE != 4 if (data_stride == 4) @@ -197,6 +215,10 @@ static inline void stride_read(const volatile void *hwfifo, void *dest, uint8_t tu_unaligned_write16(dest, *((const volatile uint16_t *)hwfifo)); } #endif + + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE == 1 + *(uint8_t *)dest = *((const volatile uint8_t *)hwfifo); + #endif } void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, const tu_hwfifo_access_t *access_mode) { @@ -209,7 +231,8 @@ void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, co HWFIFO_ADDR_NEXT(hwfifo, const); } - #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE > 1 + #ifdef CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS // 16-bit access is allowed for odd bytes if (len >= 2) { tu_unaligned_write16(dest, *((const volatile uint16_t *)hwfifo)); @@ -235,6 +258,7 @@ void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, co HWFIFO_ADDR_NEXT(hwfifo, const); } #endif + #endif } #endif @@ -251,7 +275,11 @@ static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uin tu_hwfifo_read(hwfifo, ff_buf, n, access_mode); } else { // Wrap around case - + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE == 1 + tu_hwfifo_read(hwfifo, ff_buf, lin_bytes, access_mode); // linear part + HWFIFO_ADDR_NEXT_N(hwfifo, const, lin_bytes); + tu_hwfifo_read(hwfifo, f->buffer, wrap_bytes, access_mode); // wrapped part + #else // Write full words to linear part of buffer const uint8_t data_stride = access_mode->data_stride; const uint32_t odd_mask = data_stride - 1; @@ -286,6 +314,7 @@ static void hwff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uin if (wrap_bytes > 0) { tu_hwfifo_read(hwfifo, ff_buf, wrap_bytes, access_mode); } + #endif } } @@ -303,11 +332,15 @@ static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t tu_hwfifo_write(hwfifo, ff_buf, n, access_mode); } else { // Wrap around case - + #if CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE == 1 + tu_hwfifo_write(hwfifo, ff_buf, lin_bytes, access_mode); // linear part + HWFIFO_ADDR_NEXT_N(hwfifo, , lin_bytes); + tu_hwfifo_write(hwfifo, f->buffer, wrap_bytes, access_mode); // wrapped part + #else // Read full words from linear part const uint8_t data_stride = access_mode->data_stride; const uint32_t odd_mask = data_stride - 1; - uint16_t lin_even = lin_bytes & ~odd_mask; + uint16_t lin_even = lin_bytes & ~odd_mask; tu_hwfifo_write(hwfifo, ff_buf, lin_even, access_mode); HWFIFO_ADDR_NEXT_N(hwfifo, , lin_even); ff_buf += lin_even; @@ -338,10 +371,15 @@ static void hwff_pull_n(const tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t if (wrap_bytes > 0) { tu_hwfifo_write(hwfifo, ff_buf, wrap_bytes, access_mode); } + #endif } } #endif +//--------------------------------------------------------------------+ +// Pull & Push +// copy data to/from fifo without updating read/write pointers +//--------------------------------------------------------------------+ // send n items to fifo WITHOUT updating write pointer static void ff_push_n(const tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr) { uint16_t lin_bytes = f->depth - wr_ptr; @@ -787,6 +825,6 @@ void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) { } else { info->linear.len = f->depth - wr_ptr; info->wrapped.len = remain - info->linear.len; // Remaining length - n already was limited to remain or FIFO depth - info->wrapped.ptr = f->buffer; // Always start of buffer + info->wrapped.ptr = f->buffer; // Always start of buffer } } diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 71d5cf19c..f25d808d4 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -502,7 +502,15 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to (void)rhport; (void)is_isr; hw_endpoint_t *ep = hw_endpoint_get_by_addr(ep_addr); - hw_endpoint_xfer_start(ep, buffer, total_bytes); + hw_endpoint_xfer_start(ep, buffer, NULL, total_bytes); + return true; +} + +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, uint16_t total_bytes, bool is_isr) { + (void)rhport; + (void)is_isr; + hw_endpoint_t *ep = hw_endpoint_get_by_addr(ep_addr); + hw_endpoint_xfer_start(ep, NULL, ff, total_bytes); return true; } diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 7bf247ced..06c0ce340 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -511,7 +511,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b // sie ctrl registers. Otherwise, interrupt ep registers should // already be configured if (ep == &epx) { - hw_endpoint_xfer_start(ep, buffer, buflen); + hw_endpoint_xfer_start(ep, buffer, NULL, buflen); // That has set up buffer control, endpoint control etc // for host we have to initiate the transfer @@ -527,7 +527,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b busy_wait_at_least_cycles(12); usb_hw->sie_ctrl = flags; } else { - hw_endpoint_xfer_start(ep, buffer, buflen); + hw_endpoint_xfer_start(ep, buffer, NULL, buflen); } return true; diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 8f91ecf22..bde45db1b 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -35,7 +35,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTOTYPE //--------------------------------------------------------------------+ -static void hwep_xfer_sync(hw_endpoint_t *ep); +static void sync_xfer(hw_endpoint_t *ep); #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX static bool e15_is_critical_frame_period(struct hw_endpoint *ep); @@ -55,6 +55,16 @@ static void unaligned_memcpy(void *dst, const void *src, size_t n) { } } +void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode) { + (void)access_mode; + unaligned_memcpy((void *)(uintptr_t)hwfifo, src, len); +} + +void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, const tu_hwfifo_access_t *access_mode) { + (void)access_mode; + unaligned_memcpy(dest, (const void *)(uintptr_t)hwfifo, len); +} + void rp2usb_init(void) { // Reset usb controller reset_block(RESETS_RESET_USBCTRL_BITS); @@ -127,9 +137,16 @@ static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint *ep, ep->next_pid ^= 1u; if (!is_rx) { - // Copy data from user buffer to hw buffer - unaligned_memcpy(ep->hw_data_buf + buf_id * 64, ep->user_buf, buflen); - ep->user_buf += buflen; + if (buflen) { + // Copy data from user buffer/fifo to hw buffer + uint8_t *hw_buf = ep->hw_data_buf + buf_id * 64; + if (ep->is_xfer_fifo) { + tu_hwfifo_write_from_fifo(hw_buf, ep->user_fifo, buflen, NULL); + } else { + unaligned_memcpy(hw_buf, ep->user_buf, buflen); + ep->user_buf += buflen; + } + } // Mark as full buf_ctrl |= USB_BUF_CTRL_FULL; @@ -152,7 +169,6 @@ static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint *ep, // Prepare buffer control register value void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) { const tusb_dir_t dir = tu_edpt_dir(ep->ep_addr); - bool is_rx; bool is_host = false; io_rw_32 *ep_ctrl_reg; @@ -211,7 +227,7 @@ void __tusb_irq_path_func(hw_endpoint_start_next_buffer)(struct hw_endpoint* ep) hwbuf_ctrl_set(buf_ctrl_reg, buf_ctrl); } -void hw_endpoint_xfer_start(struct hw_endpoint* ep, uint8_t* buffer, uint16_t total_len) { +void hw_endpoint_xfer_start(struct hw_endpoint *ep, uint8_t *buffer, tu_fifo_t *ff, uint16_t total_len) { hw_endpoint_lock_update(ep, 1); if (ep->active) { @@ -224,7 +240,14 @@ void hw_endpoint_xfer_start(struct hw_endpoint* ep, uint8_t* buffer, uint16_t to ep->remaining_len = total_len; ep->xferred_len = 0; ep->active = true; - ep->user_buf = buffer; + + if (ff != NULL) { + ep->user_fifo = ff; + ep->is_xfer_fifo = true; + } else { + ep->user_buf = buffer; + ep->is_xfer_fifo = false; + } #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX if (ep->e15_bulk_in) { @@ -256,17 +279,20 @@ static uint16_t __tusb_irq_path_func(sync_ep_buffer)(hw_endpoint_t *ep, io_rw_32 // We are continuing a transfer here. If we are TX, we have successfully // sent some data can increase the length we have sent assert(!(buf_ctrl & USB_BUF_CTRL_FULL)); - - ep->xferred_len = (uint16_t) (ep->xferred_len + xferred_bytes); } else { // If we have received some data, so can increase the length // we have received AFTER we have copied it to the user buffer at the appropriate offset assert(buf_ctrl & USB_BUF_CTRL_FULL); - unaligned_memcpy(ep->user_buf, ep->hw_data_buf + buf_id * 64, xferred_bytes); - ep->xferred_len = (uint16_t) (ep->xferred_len + xferred_bytes); - ep->user_buf += xferred_bytes; + uint8_t *hw_buf = ep->hw_data_buf + buf_id * 64; + if (ep->is_xfer_fifo) { + tu_hwfifo_read_to_fifo(hw_buf, ep->user_fifo, xferred_bytes, NULL); + } else { + unaligned_memcpy(ep->user_buf, hw_buf, xferred_bytes); + ep->user_buf += xferred_bytes; + } } + ep->xferred_len += xferred_bytes; // Short packet if (xferred_bytes < ep->wMaxPacketSize) { @@ -278,7 +304,7 @@ static uint16_t __tusb_irq_path_func(sync_ep_buffer)(hw_endpoint_t *ep, io_rw_32 } // Update hw endpoint struct with info from hardware after a buff status interrupt -static void __tusb_irq_path_func(hwep_xfer_sync)(hw_endpoint_t *ep) { +static void __tusb_irq_path_func(sync_xfer)(hw_endpoint_t *ep) { // const uint8_t ep_num = tu_edpt_number(ep->ep_addr); const tusb_dir_t dir = tu_edpt_dir(ep->ep_addr); @@ -350,8 +376,7 @@ bool __tusb_irq_path_func(hw_endpoint_xfer_continue)(struct hw_endpoint* ep) { panic("Can't continue xfer on inactive ep %02X", ep->ep_addr); } - // Update EP struct from hardware state - hwep_xfer_sync(ep); + sync_xfer(ep); // Update EP struct from hardware state // Now we have synced our state with the hardware. Is there more data to transfer? // If we are done then notify tinyusb diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h index 944d604bc..cce868540 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.h +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h @@ -1,14 +1,16 @@ #ifndef RP2040_COMMON_H_ #define RP2040_COMMON_H_ -#include "common/tusb_common.h" - #include "pico.h" #include "hardware/structs/usb.h" #include "hardware/irq.h" #include "hardware/resets.h" #include "hardware/timer.h" +#include "common/tusb_common.h" +#include "osal/osal.h" +#include "common/tusb_fifo.h" + #if defined(RP2040_USB_HOST_MODE) && defined(RP2040_USB_DEVICE_MODE) #error TinyUSB device and host mode not supported at the same time #endif @@ -63,32 +65,31 @@ typedef struct hw_endpoint { uint8_t ep_addr; uint8_t next_pid; uint8_t transfer_type; - - bool active; // transferring data + bool active; // transferring data + bool is_xfer_fifo; // transfer using fifo #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX bool e15_bulk_in; // Errata15 device bulk in uint8_t pending; // Transfer scheduled but not active #endif +#if CFG_TUH_ENABLED + bool configured; // Is this a valid struct + uint8_t dev_addr; + uint8_t interrupt_num; // for host interrupt endpoints +#endif + uint16_t wMaxPacketSize; uint8_t *hw_data_buf; // Buffer pointer in usb dpram - // Current transfer information - uint8_t *user_buf; // User buffer in main memory + // transfer info + union { + uint8_t *user_buf; // User buffer in main memory + tu_fifo_t *user_fifo; + }; uint16_t remaining_len; uint16_t xferred_len; -#if CFG_TUH_ENABLED - // Is this a valid struct - bool configured; - - // Only needed for host - uint8_t dev_addr; - - // If interrupt endpoint - uint8_t interrupt_num; -#endif } hw_endpoint_t; #if TUD_OPT_RP2040_USB_DEVICE_UFRAME_FIX @@ -102,7 +103,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool rp2usb_is_host_mode(void) { return (usb_hw->main_ctrl & USB_MAIN_CTRL_HOST_NDEVICE_BITS) ? true : false; } -void hw_endpoint_xfer_start(struct hw_endpoint *ep, uint8_t *buffer, uint16_t total_len); +void hw_endpoint_xfer_start(struct hw_endpoint *ep, uint8_t *buffer, tu_fifo_t *ff, uint16_t total_len); bool hw_endpoint_xfer_continue(struct hw_endpoint *ep); void hw_endpoint_reset_transfer(struct hw_endpoint *ep); void hw_endpoint_start_next_buffer(struct hw_endpoint *ep); diff --git a/src/tusb_option.h b/src/tusb_option.h index e0a52593f..abf5e0608 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -272,6 +272,25 @@ // USBIP //--------------------------------------------------------------------+ +//------------- ChipIdea -------------// +// Enable CI_HS VBUS Charge. Set this to 1 if the USB_VBUS pin is not connected to 5V VBUS (note: 3.3V is +// insufficient). +#ifndef CFG_TUD_CI_HS_VBUS_CHARGE + #ifndef CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT + #define CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT 0 + #endif + #define CFG_TUD_CI_HS_VBUS_CHARGE CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT +#endif + +// CI_HS support FIFO transfer if endpoint buffer is 4k aligned and size is multiple of 4k, also DCACHE is disabled +#ifndef CFG_TUD_CI_HS_EPBUF_4K_ALIGNED + #define CFG_TUD_CI_HS_EPBUF_4K_ALIGNED 0 +#endif + +#if CFG_TUD_CI_HS_EPBUF_4K_ALIGNED && !CFG_TUD_MEM_DCACHE_ENABLE + #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 +#endif + //------------- DWC2 -------------// // DMA mode for device #ifndef CFG_TUD_DWC2_DMA_ENABLE @@ -317,41 +336,6 @@ #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 // fixed hwfifo address #endif -//------------- ChipIdea -------------// -// Enable CI_HS VBUS Charge. Set this to 1 if the USB_VBUS pin is not connected to 5V VBUS (note: 3.3V is -// insufficient). -#ifndef CFG_TUD_CI_HS_VBUS_CHARGE - #ifndef CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT - #define CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT 0 - #endif - #define CFG_TUD_CI_HS_VBUS_CHARGE CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT -#endif - -// CI_HS support FIFO transfer if endpoint buffer is 4k aligned and size is multiple of 4k, also DCACHE is disabled -#ifndef CFG_TUD_CI_HS_EPBUF_4K_ALIGNED - #define CFG_TUD_CI_HS_EPBUF_4K_ALIGNED 0 -#endif - -#if CFG_TUD_CI_HS_EPBUF_4K_ALIGNED && !CFG_TUD_MEM_DCACHE_ENABLE - #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 -#endif - -//------------- Raspberry Pi -------------// -// Enable PIO-USB software host controller -#ifndef CFG_TUH_RPI_PIO_USB - #define CFG_TUH_RPI_PIO_USB 0 -#endif - -#ifndef CFG_TUD_RPI_PIO_USB - #define CFG_TUD_RPI_PIO_USB 0 -#endif - -//------------ MAX3421 -------------// -// Enable MAX3421 USB host controller -#ifndef CFG_TUH_MAX3421 - #define CFG_TUH_MAX3421 0 -#endif - //------------ FSDEV --------------// #if defined(TUP_USBIP_FSDEV) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 @@ -368,6 +352,12 @@ #endif #endif +//------------ MAX3421 -------------// +// Enable MAX3421 USB host controller +#ifndef CFG_TUH_MAX3421 + #define CFG_TUH_MAX3421 0 +#endif + //------------ MUSB --------------// #if defined(TUP_USBIP_MUSB) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 @@ -375,13 +365,30 @@ #define CFG_TUSB_FIFO_HWFIFO_DATA_ODD_16BIT_ACCESS // allow odd 16bit access #define CFG_TUSB_FIFO_HWFIFO_DATA_ODD_8BIT_ACCESS // allow odd 8bit access #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 // fixed hwfifo +#endif + +//------------- Raspberry Pi -------------// +// Enable PIO-USB software host controller +#ifndef CFG_TUH_RPI_PIO_USB + #define CFG_TUH_RPI_PIO_USB 0 +#endif + +#ifndef CFG_TUD_RPI_PIO_USB + #define CFG_TUD_RPI_PIO_USB 0 +#endif +#if (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUD_RPI_PIO_USB + #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 1 + #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 1 + #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE + #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_READ #endif //------------ RUSB2 --------------// #if defined(TUP_USBIP_RUSB2) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (2 | (TUD_OPT_HIGH_SPEED ? 4 : 0)) // 16 bit and 32 bit data if highspeed + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE (2 | (TUD_OPT_HIGH_SPEED ? 4 : 0)) // 16 bit and 32 bit if highspeed #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 0 #define CFG_TUSB_FIFO_HWFIFO_CUSTOM_WRITE // custom write since rusb2 can change access width 32 -> 16 and can write // odd byte with byte access -- cgit v1.3.1 From 09b8f4008450e55caea2f8ee559a3d0abcd87a36 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 9 Jan 2026 23:34:00 +0700 Subject: remove transfer_type from hw_endpoint --- hw/bsp/rp2040/family.cmake | 1 + src/portable/raspberrypi/rp2040/dcd_rp2040.c | 1 - src/portable/raspberrypi/rp2040/rp2040_usb.c | 12 ++++++------ src/portable/raspberrypi/rp2040/rp2040_usb.h | 1 - 4 files changed, 7 insertions(+), 8 deletions(-) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 40eee082d..e617ab3ca 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -251,6 +251,7 @@ function(family_configure_target TARGET RTOS) family_flash_jlink(${TARGET}) # Generate linkermap target and post build. LINKERMAP_OPTION can be set with -D to change default options + family_add_bloaty(${TARGET}) family_add_linkermap(${TARGET}) endfunction() diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index f25d808d4..240e6c727 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -74,7 +74,6 @@ static void hw_endpoint_init(hw_endpoint_t *ep, uint8_t ep_addr, uint16_t wMaxPa ep->ep_addr = ep_addr; ep->next_pid = 0u; ep->wMaxPacketSize = wMaxPacketSize; - ep->transfer_type = transfer_type; // Clear existing buffer control state io_rw_32 *buf_ctrl_reg = hwbuf_ctrl_reg_device(ep); diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index bde45db1b..3b65f57a4 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -47,22 +47,20 @@ static bool e15_is_critical_frame_period(struct hw_endpoint *ep); // Implementation //--------------------------------------------------------------------+ // Provide own byte by byte memcpy as not all copies are aligned -static void unaligned_memcpy(void *dst, const void *src, size_t n) { - uint8_t *dst_byte = (uint8_t*)dst; - const uint8_t *src_byte = (const uint8_t*)src; +static void unaligned_memcpy(uint8_t *dst, const uint8_t *src, size_t n) { while (n--) { - *dst_byte++ = *src_byte++; + *dst++ = *src++; } } void tu_hwfifo_write(volatile void *hwfifo, const uint8_t *src, uint16_t len, const tu_hwfifo_access_t *access_mode) { (void)access_mode; - unaligned_memcpy((void *)(uintptr_t)hwfifo, src, len); + unaligned_memcpy((uint8_t *)(uintptr_t)hwfifo, src, len); } void tu_hwfifo_read(const volatile void *hwfifo, uint8_t *dest, uint16_t len, const tu_hwfifo_access_t *access_mode) { (void)access_mode; - unaligned_memcpy(dest, (const void *)(uintptr_t)hwfifo, len); + unaligned_memcpy(dest, (const uint8_t *)(uintptr_t)hwfifo, len); } void rp2usb_init(void) { @@ -141,6 +139,7 @@ static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint *ep, // Copy data from user buffer/fifo to hw buffer uint8_t *hw_buf = ep->hw_data_buf + buf_id * 64; if (ep->is_xfer_fifo) { + // not in sram, may mess up timing with E15 workaround tu_hwfifo_write_from_fifo(hw_buf, ep->user_fifo, buflen, NULL); } else { unaligned_memcpy(hw_buf, ep->user_buf, buflen); @@ -286,6 +285,7 @@ static uint16_t __tusb_irq_path_func(sync_ep_buffer)(hw_endpoint_t *ep, io_rw_32 uint8_t *hw_buf = ep->hw_data_buf + buf_id * 64; if (ep->is_xfer_fifo) { + // not in sram, may mess up timing with E15 workaround tu_hwfifo_read_to_fifo(hw_buf, ep->user_fifo, xferred_bytes, NULL); } else { unaligned_memcpy(ep->user_buf, hw_buf, xferred_bytes); diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h index cce868540..c03dc34b2 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.h +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h @@ -64,7 +64,6 @@ typedef struct hw_endpoint { uint8_t ep_addr; uint8_t next_pid; - uint8_t transfer_type; bool active; // transferring data bool is_xfer_fifo; // transfer using fifo -- cgit v1.3.1 From d5362220f3bf1d9e05cc66d76708a3cbb41dffdf Mon Sep 17 00:00:00 2001 From: Gabriel Chouinard Date: Mon, 12 Jan 2026 15:15:08 -0500 Subject: Fix compiler warning --- src/common/tusb_types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index d473e53e6..7d26ac74e 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -554,7 +554,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_number(uint8_t addr) { } TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_addr(uint8_t num, uint8_t dir) { - return (uint8_t) (num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0u)); + return (uint8_t) (num | (dir == (uint8_t)TUSB_DIR_IN ? (uint8_t)TUSB_DIR_IN_MASK : 0u)); } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_edpt_packet_size(tusb_desc_endpoint_t const* desc_ep) { -- cgit v1.3.1 From 8cde9b69c3ea2eb94758641c0a7bd057a33ccabc Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 13 Jan 2026 15:17:23 +0700 Subject: minor clean up separate tud_mtp_data_send() and tud_mtp_data_receive() --- src/class/mtp/mtp_device.c | 73 +++++++++++++++++++++++----------------------- test/hil/hil_test.py | 16 +++++----- 2 files changed, 45 insertions(+), 44 deletions(-) diff --git a/src/class/mtp/mtp_device.c b/src/class/mtp/mtp_device.c index 13f868d14..59096e476 100644 --- a/src/class/mtp/mtp_device.c +++ b/src/class/mtp/mtp_device.c @@ -92,6 +92,7 @@ typedef struct { uint8_t itf_num; uint8_t ep_in; uint8_t ep_out; + uint8_t ep_event; uint8_t ep_sz_fs; // Bulk Only Transfer (BOT) Protocol @@ -194,50 +195,47 @@ static bool prepare_new_command(mtpd_interface_t* p_mtp) { return usbd_edpt_xfer(p_mtp->rhport, p_mtp->ep_out, _mtpd_epbuf.buf, CFG_TUD_MTP_EP_BUFSIZE, false); } -static bool mtpd_data_xfer(mtp_container_info_t* p_container, uint8_t ep_addr) { - mtpd_interface_t* p_mtp = &_mtpd_itf; +bool tud_mtp_data_send(mtp_container_info_t *p_container) { + mtpd_interface_t *p_mtp = &_mtpd_itf; if (p_mtp->phase == MTP_PHASE_COMMAND) { // 1st data block: header + payload p_mtp->phase = MTP_PHASE_DATA; p_mtp->xferred_len = 0; + p_mtp->total_len = p_container->header->len; - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { - p_mtp->total_len = p_container->header->len; - p_container->header->type = MTP_CONTAINER_TYPE_DATA_BLOCK; - p_container->header->transaction_id = p_mtp->command.header.transaction_id; - p_mtp->io_header = *p_container->header; // save header for subsequent data - } else { - p_mtp->total_len = p_container->header->len; - } - } else { - // subsequent data block: payload only - TU_ASSERT(p_mtp->phase == MTP_PHASE_DATA); + p_container->header->type = MTP_CONTAINER_TYPE_DATA_BLOCK; + p_container->header->transaction_id = p_mtp->command.header.transaction_id; + p_mtp->io_header = *p_container->header; // save header for subsequent data } - uint16_t xact_len = 0; - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { - xact_len = (uint16_t) tu_min32(p_mtp->total_len - p_mtp->xferred_len, CFG_TUD_MTP_EP_BUFSIZE); - } else { - // Use fixed transfer length to make ZLP handling easier - xact_len = CFG_TUD_MTP_EP_BUFSIZE; - } + const uint16_t xact_len = (uint16_t)tu_min32(p_mtp->total_len - p_mtp->xferred_len, CFG_TUD_MTP_EP_BUFSIZE); - TU_LOG_DRV(" MTP Data Xfer %s: xferred_len/total_len=%lu/%lu, xact_len=%u\r\n", - (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) ? "IN" : "OUT", - p_mtp->xferred_len, p_mtp->total_len, xact_len); + TU_LOG_DRV(" MTP Data IN: xferred_len/total_len=%lu/%lu, xact_len=%u\r\n", p_mtp->xferred_len, p_mtp->total_len, + xact_len); if (xact_len) { - TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, ep_addr)); - TU_ASSERT(usbd_edpt_xfer(p_mtp->rhport, ep_addr, _mtpd_epbuf.buf, xact_len, false)); + TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, p_mtp->ep_in)); + TU_ASSERT(usbd_edpt_xfer(p_mtp->rhport, p_mtp->ep_in, _mtpd_epbuf.buf, xact_len, false)); } return true; } -bool tud_mtp_data_send(mtp_container_info_t* p_container) { - return mtpd_data_xfer(p_container, _mtpd_itf.ep_in); -} +bool tud_mtp_data_receive(mtp_container_info_t *p_container) { + mtpd_interface_t *p_mtp = &_mtpd_itf; + if (p_mtp->phase == MTP_PHASE_COMMAND) { + // 1st data block: header + payload + p_mtp->phase = MTP_PHASE_DATA; + p_mtp->xferred_len = 0; + p_mtp->total_len = p_container->header->len; + } -bool tud_mtp_data_receive(mtp_container_info_t* p_container) { - return mtpd_data_xfer(p_container, _mtpd_itf.ep_out); + // up to buffer size since 1st packet (with header) may also contain payload + const uint16_t xact_len = CFG_TUD_MTP_EP_BUFSIZE; + + TU_LOG_DRV(" MTP Data OUT: xferred_len/total_len=%lu/%lu, xact_len=%u\r\n", p_mtp->xferred_len, p_mtp->total_len, + xact_len); + TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, p_mtp->ep_out)); + TU_ASSERT(usbd_edpt_xfer(p_mtp->rhport, p_mtp->ep_out, _mtpd_epbuf.buf, xact_len, false)); + return true; } bool tud_mtp_response_send(mtp_container_info_t* p_container) { @@ -434,22 +432,25 @@ bool mtpd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t cb_data.total_xferred_bytes = p_mtp->xferred_len; const bool is_data_in = (ep_addr == p_mtp->ep_in); - const uint16_t bulk_mps = (tud_speed_get() == TUSB_SPEED_HIGH) ? 512 : p_mtp->ep_sz_fs; // For IN endpoint, threshold is bulk max packet size // For OUT endpoint, threshold is endpoint buffer size, since we always queue fixed size - const uint16_t threshold = is_data_in ? bulk_mps : CFG_TUD_MTP_EP_BUFSIZE; + uint16_t threshold; + if (is_data_in) { + threshold = (p_mtp->ep_sz_fs > 0) ? p_mtp->ep_sz_fs : 512; // full speed bulk if set + } else { + threshold = CFG_TUD_MTP_EP_BUFSIZE; + } // Check completion: ZLP, short packet, or total length reached - bool is_complete = (xferred_bytes == 0 || - xferred_bytes < threshold || - p_mtp->xferred_len >= p_mtp->total_len); + const bool is_complete = + (xferred_bytes == 0 || xferred_bytes < threshold || p_mtp->xferred_len >= p_mtp->total_len); TU_LOG_DRV(" MTP Data %s CB: xferred_bytes=%lu, xferred_len/total_len=%lu/%lu, is_complete=%d\r\n", is_data_in ? "IN" : "OUT", xferred_bytes, p_mtp->xferred_len, p_mtp->total_len, is_complete ? 1 : 0); // Send/queue ZLP if packet is full-sized but transfer is complete if (is_complete && xferred_bytes > 0 && !(xferred_bytes & (threshold - 1))) { - TU_LOG_DRV(" QUEUE ZLP\r\n"); + TU_LOG_DRV(" queue ZLP\r\n"); TU_VERIFY(usbd_edpt_claim(p_mtp->rhport, ep_addr)); TU_ASSERT(usbd_edpt_xfer(p_mtp->rhport, ep_addr, NULL, 0, false)); return true; diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index b2e883119..dfea9612f 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -151,7 +151,7 @@ def read_disk_file(uid, lun, fname): def open_mtp_dev(uid): mtp = MTP() # MTP seems to take a while to enumerate - timeout = 2*ENUM_TIMEOUT + timeout = 2 * ENUM_TIMEOUT while timeout > 0: # run_cmd(f"gio mount -u mtp://TinyUsb_TinyUsb_Device_{uid}/") for raw in mtp.detect_devices(): @@ -617,13 +617,13 @@ def test_device_mtp(board): # device tests # note don't test 2 examples with cdc or 2 msc next to each other device_tests = [ - 'device/cdc_dual_ports', - 'device/dfu', - 'device/cdc_msc', - 'device/dfu_runtime', - 'device/cdc_msc_freertos', - 'device/hid_boot_interface', - # 'device/mtp' + # 'device/cdc_dual_ports', + # 'device/dfu', + # 'device/cdc_msc', + # 'device/dfu_runtime', + # 'device/cdc_msc_freertos', + # 'device/hid_boot_interface', + 'device/mtp' ] dual_tests = [ -- cgit v1.3.1 From 0d28bdc27f90ab5e77576e5e28f55349b36abd24 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 13 Jan 2026 16:33:14 +0700 Subject: minor clean up separate tud_mtp_data_send() and tud_mtp_data_receive() --- .github/workflows/ci_set_matrix.py | 3 ++- test/hil/hil_test.py | 14 +++++++------- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 237a34b9f..9ab08601d 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -38,7 +38,8 @@ family_list = { "stm32h7": ["arm-gcc", "arm-clang", "arm-iar"], "stm32h7rs stm32l0 stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32n6": ["arm-gcc"], - "stm32u0 stm32u5 stm32wb stm32wba": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32u0 stm32wb stm32wba": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32u5": ["arm-gcc", "arm-clang", "arm-iar"], "-bespressif_s2_devkitc": ["esp-idf"], # S3, P4 will be built by hil test # "-bespressif_s3_devkitm": ["esp-idf"], diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index dfea9612f..f742bbca2 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -617,13 +617,13 @@ def test_device_mtp(board): # device tests # note don't test 2 examples with cdc or 2 msc next to each other device_tests = [ - # 'device/cdc_dual_ports', - # 'device/dfu', - # 'device/cdc_msc', - # 'device/dfu_runtime', - # 'device/cdc_msc_freertos', - # 'device/hid_boot_interface', - 'device/mtp' + 'device/cdc_dual_ports', + 'device/dfu', + 'device/cdc_msc', + 'device/dfu_runtime', + 'device/cdc_msc_freertos', + 'device/hid_boot_interface', + # 'device/mtp' ] dual_tests = [ -- cgit v1.3.1 From 104d3f2545e460ead95dc8482fcadcf98c3749e1 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 14 Jan 2026 00:18:26 +0100 Subject: bsp: add TI EK-TM4C1294XL Signed-off-by: HiFiPhile --- docs/reference/boards.rst | 1 + examples/device/dfu/skip.txt | 2 +- hw/bsp/BoardPresets.json | 44 ++++++++++++++ hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h | 8 ++- hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h | 6 ++ hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld | 2 +- hw/bsp/tm4c/boards/ek_tm4c1294xl/TM4C1294NC.icf | 28 +++++++++ hw/bsp/tm4c/boards/ek_tm4c1294xl/board.cmake | 13 +++++ hw/bsp/tm4c/boards/ek_tm4c1294xl/board.h | 75 ++++++++++++++++++++++++ hw/bsp/tm4c/boards/ek_tm4c1294xl/board.mk | 16 ++++++ hw/bsp/tm4c/boards/ek_tm4c1294xl/tm4c1294nc.ld | 66 +++++++++++++++++++++ hw/bsp/tm4c/family.c | 76 ++++++++++++++++++++----- hw/bsp/tm4c/family.cmake | 14 ++--- hw/bsp/tm4c/family.mk | 6 +- src/portable/mentor/musb/musb_ti.h | 5 +- src/portable/mentor/musb/musb_type.h | 2 +- 16 files changed, 333 insertions(+), 31 deletions(-) create mode 100644 hw/bsp/tm4c/boards/ek_tm4c1294xl/TM4C1294NC.icf create mode 100644 hw/bsp/tm4c/boards/ek_tm4c1294xl/board.cmake create mode 100644 hw/bsp/tm4c/boards/ek_tm4c1294xl/board.h create mode 100644 hw/bsp/tm4c/boards/ek_tm4c1294xl/board.mk create mode 100644 hw/bsp/tm4c/boards/ek_tm4c1294xl/tm4c1294nc.ld diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index cacf52e1a..09c90e08f 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -333,6 +333,7 @@ Board Name Family URL msp_exp430f5529lp MSP430F5529 LaunchPad msp430 https://www.ti.com/tool/MSP-EXP430F5529LP msp_exp432e401y MSP432E401Y LaunchPad msp432e4 https://www.ti.com/tool/MSP-EXP432E401Y ek_tm4c123gxl TM4C123G LaunchPad tm4c https://www.ti.com/tool/EK-TM4C123GXL +ek_tm4c1294xl TM4C1294 LaunchPad tm4c https://www.ti.com/tool/EK-TM4C1294XL ================= ===================== ======== ========================================= ====== Tomu diff --git a/examples/device/dfu/skip.txt b/examples/device/dfu/skip.txt index 9dde06c30..79d3da9d2 100644 --- a/examples/device/dfu/skip.txt +++ b/examples/device/dfu/skip.txt @@ -1,3 +1,3 @@ -mcu:TM4C123 +mcu:TM4C mcu:BCM2835 family:espressif diff --git a/hw/bsp/BoardPresets.json b/hw/bsp/BoardPresets.json index 440ef8733..fabbeed93 100644 --- a/hw/bsp/BoardPresets.json +++ b/hw/bsp/BoardPresets.json @@ -174,6 +174,10 @@ "name": "ek_tm4c123gxl", "inherits": "default" }, + { + "name": "ek_tm4c1294xl", + "inherits": "default" + }, { "name": "f1c100s", "inherits": "default" @@ -718,6 +722,10 @@ "name": "stm32h745disco", "inherits": "default" }, + { + "name": "stm32h747disco", + "inherits": "default" + }, { "name": "stm32h750_weact", "inherits": "default" @@ -1108,6 +1116,11 @@ "description": "Build preset for the ek_tm4c123gxl board", "configurePreset": "ek_tm4c123gxl" }, + { + "name": "ek_tm4c1294xl", + "description": "Build preset for the ek_tm4c1294xl board", + "configurePreset": "ek_tm4c1294xl" + }, { "name": "espressif_addax_1", "description": "Build preset for the espressif_addax_1 board", @@ -1833,6 +1846,11 @@ "description": "Build preset for the stm32h745disco board", "configurePreset": "stm32h745disco" }, + { + "name": "stm32h747disco", + "description": "Build preset for the stm32h747disco board", + "configurePreset": "stm32h747disco" + }, { "name": "stm32h750_weact", "description": "Build preset for the stm32h750_weact board", @@ -2542,6 +2560,19 @@ } ] }, + { + "name": "ek_tm4c1294xl", + "steps": [ + { + "type": "configure", + "name": "ek_tm4c1294xl" + }, + { + "type": "build", + "name": "ek_tm4c1294xl" + } + ] + }, { "name": "espressif_addax_1", "steps": [ @@ -4427,6 +4458,19 @@ } ] }, + { + "name": "stm32h747disco", + "steps": [ + { + "type": "configure", + "name": "stm32h747disco" + }, + { + "type": "build", + "name": "stm32h747disco" + } + ] + }, { "name": "stm32h750_weact", "steps": [ diff --git a/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h index 454b085e9..b4423e269 100644 --- a/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h @@ -44,7 +44,13 @@ // skip if included from IAR assembler #ifndef __IASMARM__ - #include "TM4C123.h" + #ifdef TM4C123GH6PM + #include "TM4C123.h" + #elif TM4C1294NCPDT + #include "TM4C129.h" + #else + #error "Unknown TM4C device" + #endif #endif /* Cortex M23/M33 port configuration. */ diff --git a/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h b/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h index c0ceb4cd8..fc0ab4c60 100644 --- a/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h +++ b/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h @@ -36,20 +36,26 @@ extern "C" { #endif +#include "TM4C123.h" + #define BOARD_UART UART0 #define BOARD_UART_PORT GPIOA +#define BTN_PORT_CLK 5 #define BOARD_BTN_PORT GPIOF #define BOARD_BTN 4 #define BOARD_BTN_Msk (1u<<4) #define BUTTON_STATE_ACTIVE 0 +#define LED_PORT_CLK 5 #define LED_PORT GPIOF #define LED_PIN_RED 1 #define LED_PIN_BLUE 2 #define LED_PIN_GREEN 3 #define LED_STATE_ON 1 +#define BOARD_LED_PIN LED_PIN_BLUE + #ifdef __cplusplus } #endif diff --git a/hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld b/hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld index 11e9608cc..3f06d8f03 100644 --- a/hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld +++ b/hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld @@ -17,7 +17,7 @@ SECTIONS .text : { . = ALIGN(4) ; - *(.vectors) + KEEP(*(.vectors)) *(.text) *(.text.*) *(.init) diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/TM4C1294NC.icf b/hw/bsp/tm4c/boards/ek_tm4c1294xl/TM4C1294NC.icf new file mode 100644 index 000000000..2dba41866 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/TM4C1294NC.icf @@ -0,0 +1,28 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x00000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x00000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x000FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003FFFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x8000; +define symbol __ICFEDIT_size_heap__ = 0x10000; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.cmake b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.cmake new file mode 100644 index 000000000..3e03b3f72 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.cmake @@ -0,0 +1,13 @@ +set(MCU_SUB_VARIANT 129) + +set(JLINK_DEVICE TM4C1294NCPDT) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/tm4c1294nc.ld) +set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/TM4C1294NC.icf) + +set(OPENOCD_OPTION "-f board/ti_ek-tm4c1294xl.cfg") + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + TM4C1294NCPDT + ) +endfunction() diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.h b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.h new file mode 100644 index 000000000..4530e9430 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.h @@ -0,0 +1,75 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: TM4C1294 LaunchPad + url: https://www.ti.com/tool/EK-TM4C1294XL +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#include "TM4C129.h" + +#define BOARD_UART UART0 +#define BOARD_UART_PORT GPIOA + +#define BTN_PORT_CLK 8 +#define BOARD_BTN_PORT GPIOJ +#define BOARD_BTN 0 +#define BOARD_BTN_Msk (1u<<0) +#define BUTTON_STATE_ACTIVE 0 + +#define LED_PORT_CLK 12 +#define LED_PORT GPION +#define LED_PIN_1 1 +#define LED_PIN_2 0 +#define LED_STATE_ON 1 + +#define BOARD_LED_PIN LED_PIN_2 + +#define GPIOA GPIOA_AHB +#define GPIOB GPIOB_AHB +#define GPIOC GPIOC_AHB +#define GPIOD GPIOD_AHB +#define GPIOE GPIOE_AHB +#define GPIOF GPIOF_AHB +#define GPIOG GPIOG_AHB +#define GPIOH GPIOH_AHB +#define GPIOI GPIOI_AHB +#define GPIOJ GPIOJ_AHB + +#define GPIOA_Type GPIOA_AHB_Type + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.mk b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.mk new file mode 100644 index 000000000..b01977674 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/board.mk @@ -0,0 +1,16 @@ +MCU_SUB_VARIANT = 129 + +CFLAGS += -DTM4C1294NCPDT + +LD_FILE_GCC = $(BOARD_PATH)/tm4c1294nc.ld +LD_FILE_IAR = $(BOARD_PATH)/TM4C1294NC.icf + +# For flash-jlink target +JLINK_DEVICE = TM4C1294NCPDT + +# flash using openocd +OPENOCD_OPTION = -f board/ti_ek-tm4c1294xl.cfg + +UNIFLASH_OPTION = -c ${TOP}/${BOARD_PATH}/${BOARD}.ccxml -r 1 + +flash: flash-openocd diff --git a/hw/bsp/tm4c/boards/ek_tm4c1294xl/tm4c1294nc.ld b/hw/bsp/tm4c/boards/ek_tm4c1294xl/tm4c1294nc.ld new file mode 100644 index 000000000..fa4ea4dc5 --- /dev/null +++ b/hw/bsp/tm4c/boards/ek_tm4c1294xl/tm4c1294nc.ld @@ -0,0 +1,66 @@ +ENTRY(Reset_Handler) + +_estack = 0x20008000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ + + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 +} + +SECTIONS +{ + .text : + { + . = ALIGN(4) ; + _text = . ; + KEEP(*(.isr_vector)) + *(.text) + *(.text.*) + *(.init) + *(.fini) + *(.rodata) + *(.rodata.*) + *(.ARM.exidx*) + _etext = . ; + . = ALIGN(4) ; + } >FLASH + + .data : AT(ADDR(.text) + SIZEOF(.text)) + { + _data = .; + . = ALIGN(4); + _ldata = LOADADDR (.data); + *(.data) + *(.data.*) + _edata = .; + . = ALIGN(4); + + } >SRAM + + .bss : + { + . = ALIGN(4) ; + _bss = .; + *(.bss) + *(.bss.*) + *(.COMMON) + _ebss = .; + . = ALIGN(4); + }>SRAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >SRAM +} diff --git a/hw/bsp/tm4c/family.c b/hw/bsp/tm4c/family.c index ee1fa2a3c..ae7f22f00 100644 --- a/hw/bsp/tm4c/family.c +++ b/hw/bsp/tm4c/family.c @@ -2,7 +2,6 @@ manufacturer: Texas Instruments */ -#include "TM4C123.h" #include "bsp/board_api.h" #include "board.h" @@ -27,6 +26,9 @@ static void board_uart_init(void) { SYSCTL->RCGCUART |= (1 << 0); // Enable the clock to UART0 SYSCTL->RCGCGPIO |= (1 << 0); // Enable the clock to GPIOA + while (!(SYSCTL->PRGPIO & (1 << 0))) {} // Wait for the GPIOA clock to stabilize + while (!(SYSCTL->PRUART & (1 << 0))) {} // Wait for the UART0 clock to stabilize + GPIOA->AFSEL |= (1 << 1) | (1 << 0); // Enable the alternate function on pin PA0 & PA1 GPIOA->PCTL |= (1 << 0) | (1 << 4); // Configure the GPIOPCTL register to select UART0 in PA0 and PA1 GPIOA->DEN |= (1 << 0) | (1 << 1); // Enable the digital functionality in PA0 and PA1 @@ -44,12 +46,26 @@ static void board_uart_init(void) { UART0->CTL = (1 << 0) | (1 << 8) | (1 << 9); // UART0 Enable, Transmit Enable, Receive Enable } -static void initialize_board_led(GPIOA_Type* port, uint8_t PinMsk, uint8_t dirmsk) { - /* Enable PortF Clock */ - SYSCTL->RCGCGPIO |= (1 << 5); +static void board_button_init(GPIOA_Type* port, uint8_t PinMsk) { + /* Enable Port Clock */ + SYSCTL->RCGCGPIO |= (1 << BTN_PORT_CLK); + + /* Let the clock stabilize */ + while (!((SYSCTL->PRGPIO) & (1 << BTN_PORT_CLK))) {} + + /* Port Digital Enable */ + port->DEN |= PinMsk; + + /* Set direction */ + port->DIR &= ~PinMsk; +} + +static void board_led_init(GPIOA_Type* port, uint8_t PinMsk, uint8_t dirmsk) { + /* Enable Port Clock */ + SYSCTL->RCGCGPIO |= (1 << LED_PORT_CLK); /* Let the clock stabilize */ - while (!((SYSCTL->PRGPIO) & (1 << 5))) {} + while (!((SYSCTL->PRGPIO) & (1 << LED_PORT_CLK))) {} /* Port Digital Enable */ port->DEN |= PinMsk; @@ -71,7 +87,9 @@ static uint32_t ReadGPIOPin(GPIOA_Type* port, uint8_t pinMsk) { } void board_init(void) { +#ifdef TM4C123_H SystemCoreClockUpdate(); +#endif #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer @@ -83,6 +101,7 @@ void board_init(void) { NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif +#ifdef TM4C123_H /* Reset USB */ SYSCTL->SRCR2 |= (1u << 16); @@ -99,7 +118,7 @@ void board_init(void) { /* USB IO Initialization */ SYSCTL->RCGCGPIO |= (1u << 3); - /* Let the clock stabilize */ + /* Let the clock stabilize */ while (!(SYSCTL->PRGPIO & (1u << 3))) {} /* USB IOs to Analog Mode */ @@ -107,16 +126,43 @@ void board_init(void) { GPIOD->DEN &= ~((1u << 4) | (1u << 5)); GPIOD->AMSEL |= ((1u << 4) | (1u << 5)); - uint8_t leds = (1 << LED_PIN_RED) | (1 << LED_PIN_BLUE) | (1 << LED_PIN_GREEN); - uint8_t dirmsk = (1 << LED_PIN_RED) | (1 << LED_PIN_BLUE) | (1 << LED_PIN_GREEN); +#else // TM4C129 + /* Reset USB */ + SYSCTL->SRUSB = 1; - /* Configure GPIO for board LED */ - initialize_board_led(LED_PORT, leds, dirmsk); + for (volatile uint8_t i = 0; i < 20; i++) {} + + SYSCTL->SRUSB = 0; - /* Configure GPIO for board switch */ - GPIOF->DIR &= ~(1 << BOARD_BTN); - GPIOF->PUR |= (1 << BOARD_BTN); - GPIOF->DEN |= (1 << BOARD_BTN); + /* Open the USB clock gate */ + SYSCTL->RCGCUSB = 1; + + /* Let the clock stabilize */ + while(!(SYSCTL->PRUSB & 1)) {} + + /* USB IO Initialization */ + SYSCTL->RCGCGPIO |= (1u << 10); + + /* Let the clock stabilize */ + while (!(SYSCTL->PRGPIO & (1u << 10))) {} + + /* USB IOs to Analog Mode */ + GPIOL->AFSEL &= ~((1u << 6) | (1u << 7)); + GPIOL->DEN &= ~((1u << 6) | (1u << 7)); + GPIOL->AMSEL |= ((1u << 6) | (1u << 7)); + + /* USB Clock Configuration */ + USB0->CC = 0x207; +#endif + + uint8_t leds = 1 << BOARD_LED_PIN; + uint8_t dirmsk = 1 << BOARD_LED_PIN; + + /* Configure GPIO for board button */ + board_button_init(BOARD_BTN_PORT, BOARD_BTN_Msk); + + /* Configure GPIO for board LED */ + board_led_init(LED_PORT, leds, dirmsk); /* Initialize board UART */ board_uart_init(); @@ -125,7 +171,7 @@ void board_init(void) { } void board_led_write(bool state) { - WriteGPIOPin(LED_PORT, (1 << LED_PIN_BLUE), state); + WriteGPIOPin(LED_PORT, (1 << BOARD_LED_PIN), state); } uint32_t board_button_read(void) { diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index 12f0448a3..9cef96b9d 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -5,14 +5,14 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) set(MCU_VARIANT tm4c${MCU_SUB_VARIANT}) set(MCU_VARIANT_UPPER TM4C${MCU_SUB_VARIANT}) -set(SDK_DIR ${TOP}/hw/mcu/ti/${MCU_VARIANT}xx) +set(SDK_DIR ${TOP}/hw/mcu/ti/tm4c) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) # toolchain set up set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(FAMILY_MCUS TM4C123 CACHE INTERNAL "") +set(FAMILY_MCUS TM4C CACHE INTERNAL "") #------------------------------------ # Startup & Linker script @@ -20,7 +20,7 @@ set(FAMILY_MCUS TM4C123 CACHE INTERNAL "") set(LD_FILE_Clang ${LD_FILE_GNU}) set(STARTUP_FILE_GNU ${SDK_DIR}/Source/GCC/${MCU_VARIANT}_startup.c) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - +set(STARTUP_FILE_IAR ${SDK_DIR}/Source/IAR/${MCU_VARIANT}_startup.c) #------------------------------------ # Board Target #------------------------------------ @@ -29,7 +29,7 @@ function(family_add_board BOARD_TARGET) ${SDK_DIR}/Source/system_${MCU_VARIANT_UPPER}.c ) target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/Include/${MCU_VARIANT_UPPER} + ${SDK_DIR}/Include ${CMSIS_DIR}/CMSIS/Core/Include ) @@ -41,7 +41,7 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - family_add_tinyusb(${TARGET} OPT_MCU_TM4C123) + family_add_tinyusb(${TARGET} OPT_MCU_TM4C${MCU_SUB_VARIANT}) target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c @@ -72,12 +72,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES - SKIP_LINTING ON - COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) family_flash_openocd(${TARGET}) family_flash_uniflash(${TARGET}) endfunction() diff --git a/hw/bsp/tm4c/family.mk b/hw/bsp/tm4c/family.mk index 76ae785b2..bc966d98e 100644 --- a/hw/bsp/tm4c/family.mk +++ b/hw/bsp/tm4c/family.mk @@ -4,11 +4,11 @@ CPU_CORE ?= cortex-m4 MCU_VARIANT = tm4c${MCU_SUB_VARIANT} MCU_VARIANT_UPPER = TM4C${MCU_SUB_VARIANT} -SDK_DIR = hw/mcu/ti/${MCU_VARIANT}xx +SDK_DIR = hw/mcu/ti/tm4c CFLAGS += \ -flto \ - -DCFG_TUSB_MCU=OPT_MCU_TM4C123 \ + -DCFG_TUSB_MCU=OPT_MCU_TM4C${MCU_SUB_VARIANT} \ -uvectors \ # mcu driver cause following warnings @@ -18,7 +18,7 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs INC += \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(SDK_DIR)/Include/${MCU_VARIANT_UPPER} \ + $(TOP)/$(SDK_DIR)/Include \ $(TOP)/$(BOARD_PATH) SRC_C += \ diff --git a/src/portable/mentor/musb/musb_ti.h b/src/portable/mentor/musb/musb_ti.h index d17e836ee..68e89d77d 100644 --- a/src/portable/mentor/musb/musb_ti.h +++ b/src/portable/mentor/musb/musb_ti.h @@ -35,7 +35,10 @@ #include "TM4C123.h" #define FIFO0_WORD FIFO0 #define FIFO1_WORD FIFO1 -//#elif CFG_TUSB_MCU == OPT_MCU_TM4C129 +#elif CFG_TUSB_MCU == OPT_MCU_TM4C129 + #include "TM4C129.h" + #define FIFO0_WORD FIFOA + #define FIFO1_WORD FIFOB #elif CFG_TUSB_MCU == OPT_MCU_MSP432E4 #include "msp.h" #else diff --git a/src/portable/mentor/musb/musb_type.h b/src/portable/mentor/musb/musb_type.h index 4e448c0ed..b2f6492fa 100644 --- a/src/portable/mentor/musb/musb_type.h +++ b/src/portable/mentor/musb/musb_type.h @@ -147,7 +147,7 @@ typedef struct TU_ATTR_PACKED { TU_VERIFY_STATIC(sizeof(musb_ep_csr_t) == 16, "size is not correct"); -typedef struct TU_ATTR_PACKED { +typedef struct { //------------- Common -------------// __IO uint8_t faddr; // 0x00: FADDR union { -- cgit v1.3.1 From c1a506793b0617f91ec2317af6ea6ed53192bccc Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 14 Jan 2026 00:19:18 +0100 Subject: dcd/musb: fix IAR build Signed-off-by: HiFiPhile --- src/portable/mentor/musb/dcd_musb.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index 3827be318..f0c5aa722 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -175,9 +175,8 @@ static void process_setup_packet(uint8_t rhport) { // Read setup packet uint32_t *p = (void*)&_dcd.setup_packet; - volatile uint32_t *fifo_ptr = &musb_regs->fifo[0]; - p[0] = *fifo_ptr; - p[1] = *fifo_ptr; + p[0] = musb_regs->fifo[0]; + p[1] = musb_regs->fifo[0]; _dcd.pipe0.buf = NULL; _dcd.pipe0.length = 0; @@ -218,7 +217,7 @@ static bool handle_xfer_in(uint8_t rhport, uint_fast8_t ep_addr) tu_hwfifo_write_from_fifo(fifo_ptr, (tu_fifo_t *)buf, len, NULL); } else { tu_hwfifo_write(fifo_ptr, buf, len, NULL); - pipe->buf = buf + len; + pipe->buf = (uint8_t*)buf + len; } pipe->remaining = rem - len; } @@ -249,7 +248,7 @@ static bool handle_xfer_out(uint8_t rhport, uint_fast8_t ep_addr) tu_hwfifo_read_to_fifo(fifo_ptr, (tu_fifo_t *)buf, len, NULL); } else { tu_hwfifo_read(fifo_ptr, buf, len, NULL); - pipe->buf = buf + len; + pipe->buf = (uint8_t*)buf + len; } pipe->remaining = rem - len; } -- cgit v1.3.1 From 86ca8fe717f379879298f6a723cafa897bae04de Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 14 Jan 2026 10:46:59 +0700 Subject: remove no-fifo mode in edpt stream API update vendor_device.c for direct usbd xfer when either RX/TX BUFSIZE is 0 i.e CFG_TUD_VENDOR_TXRX_BUFFERED = 0 --- src/class/vendor/vendor_device.c | 262 +++++++++++++++++++++++---------------- src/class/vendor/vendor_device.h | 44 ++++--- src/common/tusb_private.h | 8 -- src/tusb.c | 103 +++++---------- 4 files changed, 206 insertions(+), 211 deletions(-) diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index b8e6fec6f..b917c8dc7 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -40,36 +40,33 @@ typedef struct { uint8_t rhport; uint8_t itf_num; + #if CFG_TUD_VENDOR_TXRX_BUFFERED /*------------- From this point, data is not cleared by bus reset -------------*/ - struct { - tu_edpt_stream_t tx; - tu_edpt_stream_t rx; - - #if CFG_TUD_VENDOR_TX_BUFSIZE > 0 - uint8_t tx_ff_buf[CFG_TUD_VENDOR_TX_BUFSIZE]; - #endif - - #if CFG_TUD_VENDOR_RX_BUFSIZE > 0 - uint8_t rx_ff_buf[CFG_TUD_VENDOR_RX_BUFSIZE]; + tu_edpt_stream_t tx_stream; + tu_edpt_stream_t rx_stream; + uint8_t tx_ff_buf[CFG_TUD_VENDOR_TX_BUFSIZE]; + uint8_t rx_ff_buf[CFG_TUD_VENDOR_RX_BUFSIZE]; + #else + uint8_t ep_in; + uint8_t ep_out; + uint16_t ep_in_mps; + uint16_t ep_out_mps; #endif - } stream; } vendord_interface_t; -#define ITF_MEM_RESET_SIZE (offsetof(vendord_interface_t, itf_num) + sizeof(((vendord_interface_t *)0)->itf_num)) + #if CFG_TUD_VENDOR_TXRX_BUFFERED + #define ITF_MEM_RESET_SIZE (offsetof(vendord_interface_t, itf_num) + TU_FIELD_SIZE(vendord_interface_t, itf_num)) + #else + #define ITF_MEM_RESET_SIZE sizeof(vendord_interface_t) + #endif static vendord_interface_t _vendord_itf[CFG_TUD_VENDOR]; -#if CFG_TUD_EDPT_DEDICATED_HWFIFO == 0 || CFG_TUD_VENDOR_RX_BUFSIZE == 0 + // Skip local EP buffer if dedicated hw FIFO is supported or no fifo mode + #if CFG_TUD_EDPT_DEDICATED_HWFIFO == 0 || !CFG_TUD_VENDOR_TXRX_BUFFERED typedef struct { - // Skip local EP buffer if dedicated hw FIFO is supported - #if CFG_TUD_EDPT_DEDICATED_HWFIFO == 0 || CFG_TUD_VENDOR_RX_BUFSIZE == 0 TUD_EPBUF_DEF(epout, CFG_TUD_VENDOR_EPSIZE); - #endif - - // Skip local EP buffer if dedicated hw FIFO is supported - #if CFG_TUD_EDPT_DEDICATED_HWFIFO == 0 TUD_EPBUF_DEF(epin, CFG_TUD_VENDOR_EPSIZE); - #endif } vendord_epbuf_t; CFG_TUD_MEM_SECTION static vendord_epbuf_t _vendord_epbuf[CFG_TUD_VENDOR]; @@ -78,7 +75,6 @@ CFG_TUD_MEM_SECTION static vendord_epbuf_t _vendord_epbuf[CFG_TUD_VENDOR]; //--------------------------------------------------------------------+ // Weak stubs: invoked if no strong implementation is available //--------------------------------------------------------------------+ - TU_ATTR_WEAK void tud_vendor_rx_cb(uint8_t idx, const uint8_t *buffer, uint32_t bufsize) { (void)idx; (void)buffer; @@ -93,40 +89,44 @@ TU_ATTR_WEAK void tud_vendor_tx_cb(uint8_t idx, uint32_t sent_bytes) { //-------------------------------------------------------------------- // Application API //-------------------------------------------------------------------- - bool tud_vendor_n_mounted(uint8_t idx) { TU_VERIFY(idx < CFG_TUD_VENDOR); vendord_interface_t *p_itf = &_vendord_itf[idx]; - return p_itf->stream.rx.ep_addr || p_itf->stream.tx.ep_addr; + + #if CFG_TUD_VENDOR_TXRX_BUFFERED + return (p_itf->rx_stream.ep_addr != 0) || (p_itf->tx_stream.ep_addr != 0); + #else + return (p_itf->ep_out != 0) || (p_itf->ep_in != 0); + #endif } //--------------------------------------------------------------------+ // Read API //--------------------------------------------------------------------+ -#if CFG_TUD_VENDOR_RX_BUFSIZE > 0 + #if CFG_TUD_VENDOR_TXRX_BUFFERED uint32_t tud_vendor_n_available(uint8_t idx) { TU_VERIFY(idx < CFG_TUD_VENDOR, 0); vendord_interface_t *p_itf = &_vendord_itf[idx]; - return tu_edpt_stream_read_available(&p_itf->stream.rx); + return tu_edpt_stream_read_available(&p_itf->rx_stream); } bool tud_vendor_n_peek(uint8_t idx, uint8_t *u8) { TU_VERIFY(idx < CFG_TUD_VENDOR); vendord_interface_t *p_itf = &_vendord_itf[idx]; - return tu_edpt_stream_peek(&p_itf->stream.rx, u8); + return tu_edpt_stream_peek(&p_itf->rx_stream, u8); } uint32_t tud_vendor_n_read(uint8_t idx, void *buffer, uint32_t bufsize) { TU_VERIFY(idx < CFG_TUD_VENDOR, 0); vendord_interface_t *p_itf = &_vendord_itf[idx]; - return tu_edpt_stream_read(&p_itf->stream.rx, buffer, bufsize); + return tu_edpt_stream_read(&p_itf->rx_stream, buffer, bufsize); } void tud_vendor_n_read_flush(uint8_t idx) { TU_VERIFY(idx < CFG_TUD_VENDOR, ); vendord_interface_t *p_itf = &_vendord_itf[idx]; - tu_edpt_stream_clear(&p_itf->stream.rx); - tu_edpt_stream_read_xfer(&p_itf->stream.rx); + tu_edpt_stream_clear(&p_itf->rx_stream); + tu_edpt_stream_read_xfer(&p_itf->rx_stream); } #endif @@ -134,9 +134,17 @@ void tud_vendor_n_read_flush(uint8_t idx) { bool tud_vendor_n_read_xfer(uint8_t idx) { TU_VERIFY(idx < CFG_TUD_VENDOR); vendord_interface_t *p_itf = &_vendord_itf[idx]; - return tu_edpt_stream_read_xfer(&p_itf->stream.rx); + + #if CFG_TUD_VENDOR_TXRX_BUFFERED + return tu_edpt_stream_read_xfer(&p_itf->rx_stream); + + #else + // Non-FIFO mode + TU_VERIFY(usbd_edpt_claim(p_itf->rhport, p_itf->ep_out)); + return usbd_edpt_xfer(p_itf->rhport, p_itf->ep_out, _vendord_epbuf[idx].epout, CFG_TUD_VENDOR_EPSIZE, false); + #endif } -#endif + #endif //--------------------------------------------------------------------+ @@ -145,26 +153,45 @@ bool tud_vendor_n_read_xfer(uint8_t idx) { uint32_t tud_vendor_n_write(uint8_t idx, const void *buffer, uint32_t bufsize) { TU_VERIFY(idx < CFG_TUD_VENDOR, 0); vendord_interface_t *p_itf = &_vendord_itf[idx]; - return tu_edpt_stream_write(&p_itf->stream.tx, buffer, (uint16_t)bufsize); + + #if CFG_TUD_VENDOR_TXRX_BUFFERED + return tu_edpt_stream_write(&p_itf->tx_stream, buffer, (uint16_t)bufsize); + + #else + // non-fifo mode: direct transfer + TU_VERIFY(usbd_edpt_claim(p_itf->rhport, p_itf->ep_in), 0); + const uint32_t xact_len = tu_min32(bufsize, CFG_TUD_VENDOR_EPSIZE); + memcpy(_vendord_epbuf[idx].epin, buffer, xact_len); + TU_ASSERT(usbd_edpt_xfer(p_itf->rhport, p_itf->ep_in, _vendord_epbuf[idx].epin, (uint16_t)xact_len, false), 0); + return xact_len; + #endif } -#if CFG_TUD_VENDOR_TX_BUFSIZE > 0 -uint32_t tud_vendor_n_write_flush(uint8_t idx) { +uint32_t tud_vendor_n_write_available(uint8_t idx) { TU_VERIFY(idx < CFG_TUD_VENDOR, 0); vendord_interface_t *p_itf = &_vendord_itf[idx]; - return tu_edpt_stream_write_xfer(&p_itf->stream.tx); + + #if CFG_TUD_VENDOR_TXRX_BUFFERED + return tu_edpt_stream_write_available(&p_itf->tx_stream); + + #else + // Non-FIFO mode + TU_VERIFY(p_itf->ep_in > 0, 0); // must be opened + return usbd_edpt_busy(p_itf->rhport, p_itf->ep_in) ? 0 : CFG_TUD_VENDOR_EPSIZE; + #endif } -uint32_t tud_vendor_n_write_available(uint8_t idx) { + #if CFG_TUD_VENDOR_TXRX_BUFFERED +uint32_t tud_vendor_n_write_flush(uint8_t idx) { TU_VERIFY(idx < CFG_TUD_VENDOR, 0); vendord_interface_t *p_itf = &_vendord_itf[idx]; - return tu_edpt_stream_write_available(&p_itf->stream.tx); + return tu_edpt_stream_write_xfer(&p_itf->tx_stream); } bool tud_vendor_n_write_clear(uint8_t idx) { TU_VERIFY(idx < CFG_TUD_VENDOR, 0); vendord_interface_t *p_itf = &_vendord_itf[idx]; - tu_edpt_stream_clear(&p_itf->stream.tx); + tu_edpt_stream_clear(&p_itf->tx_stream); return true; } #endif @@ -175,48 +202,37 @@ bool tud_vendor_n_write_clear(uint8_t idx) { void vendord_init(void) { tu_memclr(_vendord_itf, sizeof(_vendord_itf)); - for(uint8_t i=0; i 0 - uint8_t *rx_ff_buf = p_itf->stream.rx_ff_buf; - #else - uint8_t *rx_ff_buf = NULL; - #endif + #endif - tu_edpt_stream_init(&p_itf->stream.rx, false, false, false, rx_ff_buf, CFG_TUD_VENDOR_RX_BUFSIZE, epout_buf, + uint8_t *rx_ff_buf = p_itf->rx_ff_buf; + tu_edpt_stream_init(&p_itf->rx_stream, false, false, false, rx_ff_buf, CFG_TUD_VENDOR_RX_BUFSIZE, epout_buf, CFG_TUD_VENDOR_EPSIZE); - #if CFG_TUD_VENDOR_TX_BUFSIZE > 0 - uint8_t *tx_ff_buf = p_itf->stream.tx_ff_buf; - #else - uint8_t *tx_ff_buf = NULL; - #endif - - tu_edpt_stream_init(&p_itf->stream.tx, false, true, false, tx_ff_buf, CFG_TUD_VENDOR_TX_BUFSIZE, epin_buf, + uint8_t *tx_ff_buf = p_itf->tx_ff_buf; + tu_edpt_stream_init(&p_itf->tx_stream, false, true, false, tx_ff_buf, CFG_TUD_VENDOR_TX_BUFSIZE, epin_buf, CFG_TUD_VENDOR_EPSIZE); } + #endif } bool vendord_deinit(void) { - for(uint8_t i=0; istream.rx); - tu_edpt_stream_deinit(&p_itf->stream.tx); + #if CFG_TUD_VENDOR_TXRX_BUFFERED + for (uint8_t i = 0; i < CFG_TUD_VENDOR; i++) { + vendord_interface_t *p_itf = &_vendord_itf[i]; + tu_edpt_stream_deinit(&p_itf->rx_stream); + tu_edpt_stream_deinit(&p_itf->tx_stream); } + #endif return true; } @@ -227,11 +243,12 @@ void vendord_reset(uint8_t rhport) { vendord_interface_t* p_itf = &_vendord_itf[i]; tu_memclr(p_itf, ITF_MEM_RESET_SIZE); - tu_edpt_stream_clear(&p_itf->stream.rx); - tu_edpt_stream_close(&p_itf->stream.rx); - - tu_edpt_stream_clear(&p_itf->stream.tx); - tu_edpt_stream_close(&p_itf->stream.tx); + #if CFG_TUD_VENDOR_TXRX_BUFFERED + tu_edpt_stream_clear(&p_itf->rx_stream); + tu_edpt_stream_close(&p_itf->rx_stream); + tu_edpt_stream_clear(&p_itf->tx_stream); + tu_edpt_stream_close(&p_itf->tx_stream); + #endif } } @@ -241,13 +258,25 @@ static uint8_t find_vendor_itf(uint8_t ep_addr) { const vendord_interface_t *p_vendor = &_vendord_itf[idx]; if (ep_addr == 0) { // find unused: require both ep == 0 - if (p_vendor->stream.rx.ep_addr == 0 && p_vendor->stream.tx.ep_addr == 0) { + #if CFG_TUD_VENDOR_TXRX_BUFFERED + if (p_vendor->rx_stream.ep_addr == 0 && p_vendor->tx_stream.ep_addr == 0) { return idx; } - } else if (ep_addr == p_vendor->stream.rx.ep_addr || ep_addr == p_vendor->stream.tx.ep_addr) { - return idx; + #else + if (p_vendor->ep_out == 0 && p_vendor->ep_in == 0) { + return idx; + } + #endif } else { - // nothing to do + #if CFG_TUD_VENDOR_TXRX_BUFFERED + if (ep_addr == p_vendor->rx_stream.ep_addr || ep_addr == p_vendor->tx_stream.ep_addr) { + return idx; + } + #else + if (ep_addr == p_vendor->ep_out || ep_addr == p_vendor->ep_in) { + return idx; + } + #endif } } return 0xff; @@ -273,28 +302,39 @@ uint16_t vendord_open(uint8_t rhport, const tusb_desc_interface_t *desc_itf, uin const tusb_desc_endpoint_t* desc_ep = (const tusb_desc_endpoint_t*) p_desc; TU_ASSERT(usbd_edpt_open(rhport, desc_ep)); - // open endpoint stream, skip if already opened (multiple IN/OUT endpoints) + #if CFG_TUD_VENDOR_TXRX_BUFFERED + // open endpoint stream if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { - tu_edpt_stream_t *stream_tx = &p_vendor->stream.tx; - if (stream_tx->ep_addr == 0) { - tu_edpt_stream_open(stream_tx, rhport, desc_ep); - tu_edpt_stream_write_xfer(stream_tx); // flush pending data - } + tu_edpt_stream_t *tx_stream = &p_vendor->tx_stream; + tu_edpt_stream_open(tx_stream, rhport, desc_ep); + tu_edpt_stream_write_xfer(tx_stream); // flush pending data } else { - tu_edpt_stream_t *stream_rx = &p_vendor->stream.rx; - if (stream_rx->ep_addr == 0) { - tu_edpt_stream_open(stream_rx, rhport, desc_ep); - #if CFG_TUD_VENDOR_RX_MANUAL_XFER == 0 - TU_ASSERT(tu_edpt_stream_read_xfer(stream_rx) > 0, 0); // prepare for incoming data - #endif - } + tu_edpt_stream_t *rx_stream = &p_vendor->rx_stream; + tu_edpt_stream_open(rx_stream, rhport, desc_ep); + #if CFG_TUD_VENDOR_RX_MANUAL_XFER == 0 + TU_ASSERT(tu_edpt_stream_read_xfer(rx_stream) > 0, 0); // prepare for incoming data + #endif + } + #else + // Non-FIFO mode: store endpoint info + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { + p_vendor->ep_in = desc_ep->bEndpointAddress; + p_vendor->ep_in_mps = tu_edpt_packet_size(desc_ep); + } else { + p_vendor->ep_out = desc_ep->bEndpointAddress; + p_vendor->ep_out_mps = tu_edpt_packet_size(desc_ep); + #if CFG_TUD_VENDOR_RX_MANUAL_XFER == 0 + // Prepare for incoming data + TU_ASSERT(usbd_edpt_xfer(rhport, p_vendor->ep_out, _vendord_epbuf[idx].epout, CFG_TUD_VENDOR_EPSIZE, false), 0); + #endif } + #endif } p_desc = tu_desc_next(p_desc); } - return (uint16_t) ((uintptr_t) p_desc - (uintptr_t) desc_itf); + return (uint16_t)((uintptr_t)p_desc - (uintptr_t)desc_itf); } bool vendord_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { @@ -304,34 +344,36 @@ bool vendord_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint TU_VERIFY(idx < CFG_TUD_VENDOR); vendord_interface_t *p_vendor = &_vendord_itf[idx]; - if (ep_addr == p_vendor->stream.rx.ep_addr) { - #if CFG_TUD_VENDOR_RX_BUFSIZE - // Received new data: put into stream's fifo - tu_edpt_stream_read_xfer_complete(&p_vendor->stream.rx, xferred_bytes); - #endif - - // invoke callback - #if CFG_TUD_VENDOR_RX_BUFSIZE == 0 - tud_vendor_rx_cb(idx, p_vendor->stream.rx.ep_buf, xferred_bytes); - #else +#if CFG_TUD_VENDOR_TXRX_BUFFERED + if (ep_addr == p_vendor->rx_stream.ep_addr) { + // Put received data to FIFO + tu_edpt_stream_read_xfer_complete(&p_vendor->rx_stream, xferred_bytes); tud_vendor_rx_cb(idx, NULL, 0); - #endif - - #if CFG_TUD_VENDOR_RX_MANUAL_XFER == 0 - tu_edpt_stream_read_xfer(&p_vendor->stream.rx); // prepare next data - #endif - } else if (ep_addr == p_vendor->stream.tx.ep_addr) { + #if CFG_TUD_VENDOR_RX_MANUAL_XFER == 0 + tu_edpt_stream_read_xfer(&p_vendor->rx_stream); // prepare next data + #endif + } else if (ep_addr == p_vendor->tx_stream.ep_addr) { // Send complete tud_vendor_tx_cb(idx, (uint16_t)xferred_bytes); - #if CFG_TUD_VENDOR_TX_BUFSIZE > 0 // try to send more if possible - if (0 == tu_edpt_stream_write_xfer(&p_vendor->stream.tx)) { + if (0 == tu_edpt_stream_write_xfer(&p_vendor->tx_stream)) { // If there is no data left, a ZLP should be sent if xferred_bytes is multiple of EP Packet size and not zero - tu_edpt_stream_write_zlp_if_needed(&p_vendor->stream.tx, xferred_bytes); + tu_edpt_stream_write_zlp_if_needed(&p_vendor->tx_stream, xferred_bytes); } - #endif } + #else + if (ep_addr == p_vendor->ep_out) { + // Non-FIFO mode: invoke callback with buffer + tud_vendor_rx_cb(idx, _vendord_epbuf[idx].epout, xferred_bytes); + #if CFG_TUD_VENDOR_RX_MANUAL_XFER == 0 + usbd_edpt_xfer(rhport, p_vendor->ep_out, _vendord_epbuf[idx].epout, CFG_TUD_VENDOR_EPSIZE, false); + #endif + } else if (ep_addr == p_vendor->ep_in) { + // Send complete + tud_vendor_tx_cb(idx, (uint16_t)xferred_bytes); + } + #endif return true; } diff --git a/src/class/vendor/vendor_device.h b/src/class/vendor/vendor_device.h index c3de4c49d..101765bb1 100644 --- a/src/class/vendor/vendor_device.h +++ b/src/class/vendor/vendor_device.h @@ -50,8 +50,14 @@ extern "C" { #define CFG_TUD_VENDOR_TX_BUFSIZE 64 #endif +// Vendor is buffered (FIFO mode) if both TX and RX buffers are configured +// If either is 0, vendor operates in non-buffered (direct transfer) mode +#ifndef CFG_TUD_VENDOR_TXRX_BUFFERED + #define CFG_TUD_VENDOR_TXRX_BUFFERED ((CFG_TUD_VENDOR_RX_BUFSIZE > 0) && (CFG_TUD_VENDOR_TX_BUFSIZE > 0)) +#endif + // Application will manually schedule RX transfer. This can be useful when using with non-fifo (buffered) mode -// i.e. CFG_TUD_VENDOR_RX_BUFSIZE = 0 +// i.e. CFG_TUD_VENDOR_TXRX_BUFFERED = 0 #ifndef CFG_TUD_VENDOR_RX_MANUAL_XFER #define CFG_TUD_VENDOR_RX_MANUAL_XFER 0 #endif @@ -63,7 +69,8 @@ extern "C" { // Return whether the vendor interface is mounted bool tud_vendor_n_mounted(uint8_t idx); -#if CFG_TUD_VENDOR_RX_BUFSIZE > 0 +//------------- RX -------------// +#if CFG_TUD_VENDOR_TXRX_BUFFERED // Return number of available bytes for reading uint32_t tud_vendor_n_available(uint8_t idx); @@ -82,16 +89,17 @@ void tud_vendor_n_read_flush(uint8_t idx); bool tud_vendor_n_read_xfer(uint8_t idx); #endif +//------------- TX -------------// // Write to TX FIFO. This can be buffered and not sent immediately unless buffered bytes >= USB endpoint size uint32_t tud_vendor_n_write(uint8_t idx, const void *buffer, uint32_t bufsize); -#if CFG_TUD_VENDOR_TX_BUFSIZE > 0 +// Return number of bytes available for writing in TX FIFO (or endpoint if non-buffered) +uint32_t tud_vendor_n_write_available(uint8_t idx); + +#if CFG_TUD_VENDOR_TXRX_BUFFERED // Force sending buffered data, return number of bytes sent uint32_t tud_vendor_n_write_flush(uint8_t idx); -// Return number of bytes available for writing in TX FIFO -uint32_t tud_vendor_n_write_available(uint8_t idx); - // Clear the transmit FIFO bool tud_vendor_n_write_clear(uint8_t idx); #endif @@ -111,7 +119,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool tud_vendor_mounted(void) { return tud_vendor_n_mounted(0); } -#if CFG_TUD_VENDOR_RX_BUFSIZE > 0 +#if CFG_TUD_VENDOR_TXRX_BUFFERED TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_available(void) { return tud_vendor_n_available(0); } @@ -127,6 +135,14 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_read(void *buffer, uint3 TU_ATTR_ALWAYS_INLINE static inline void tud_vendor_read_flush(void) { tud_vendor_n_read_flush(0); } + +TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_write_flush(void) { + return tud_vendor_n_write_flush(0); +} + +TU_ATTR_ALWAYS_INLINE static inline bool tud_vendor_write_clear(void) { + return tud_vendor_n_write_clear(0); +} #endif #if CFG_TUD_VENDOR_RX_MANUAL_XFER @@ -143,20 +159,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_write_str(const char *st return tud_vendor_n_write_str(0, str); } -#if CFG_TUD_VENDOR_TX_BUFSIZE > 0 -TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_write_flush(void) { - return tud_vendor_n_write_flush(0); -} - TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_vendor_write_available(void) { return tud_vendor_n_write_available(0); } -TU_ATTR_ALWAYS_INLINE static inline bool tud_vendor_write_clear(void) { - return tud_vendor_n_write_clear(0); -} -#endif - // backward compatible #define tud_vendor_flush() tud_vendor_write_flush() @@ -165,8 +171,8 @@ TU_ATTR_ALWAYS_INLINE static inline bool tud_vendor_write_clear(void) { //--------------------------------------------------------------------+ // Invoked when received new data. -// - CFG_TUD_VENDOR_RX_BUFSIZE > 0; buffer and bufsize must not be used (both NULL,0) since data is in RX FIFO -// - CFG_TUD_VENDOR_RX_BUFSIZE = 0: Buffer and bufsize are valid +// - CFG_TUD_VENDOR_TXRX_BUFFERED = 1: buffer and bufsize must not be used (both NULL,0) since data is in RX FIFO +// - CFG_TUD_VENDOR_TXRX_BUFFERED = 0: Buffer and bufsize are valid void tud_vendor_rx_cb(uint8_t idx, const uint8_t *buffer, uint32_t bufsize); // Invoked when tx transfer is finished diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 10e12c2af..43ce7a1df 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -37,14 +37,6 @@ // Configuration //--------------------------------------------------------------------+ -#if CFG_TUD_ENABLED && CFG_TUD_VENDOR && (CFG_TUD_VENDOR_TX_BUFSIZE == 0 || CFG_TUD_VENDOR_RX_BUFSIZE == 0) - #define CFG_TUSB_EDPT_STREAM_NO_FIFO_ENABLED 1 -#endif - -#ifndef CFG_TUSB_EDPT_STREAM_NO_FIFO_ENABLED - #define CFG_TUSB_EDPT_STREAM_NO_FIFO_ENABLED 0 -#endif - #define TUP_USBIP_CONTROLLER_NUM 2 extern tusb_role_t _tusb_rhport_role[TUP_USBIP_CONTROLLER_NUM]; diff --git a/src/tusb.c b/src/tusb.c index 256aa832f..bf82cdbe9 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -309,11 +309,9 @@ bool tu_edpt_stream_init(tu_edpt_stream_t *s, bool is_host, bool is_tx, bool ove uint16_t ff_bufsize, uint8_t *ep_buf, uint16_t ep_bufsize) { (void) is_tx; - #if CFG_TUSB_EDPT_STREAM_NO_FIFO_ENABLED == 0 // FIFO is required if (ff_buf == NULL || ff_bufsize == 0) { return false; } - #endif s->is_host = is_host; tu_fifo_config(&s->ff, ff_buf, ff_bufsize, overwritable); @@ -411,88 +409,45 @@ uint32_t tu_edpt_stream_write_xfer(tu_edpt_stream_t *s) { } uint32_t tu_edpt_stream_write(tu_edpt_stream_t *s, const void *buffer, uint32_t bufsize) { - #if CFG_TUSB_EDPT_STREAM_NO_FIFO_ENABLED - if (0 == tu_fifo_depth(&s->ff)) { - // non-fifo mode: TX need ep buffer - TU_VERIFY(s->ep_buf != NULL, 0); - TU_VERIFY(stream_claim(s), 0); - uint32_t xact_len = tu_min32(bufsize, s->ep_bufsize); - memcpy(s->ep_buf, buffer, xact_len); - TU_ASSERT(stream_xfer(s, (uint16_t) xact_len), 0); - return xact_len; - } else - #endif - { - TU_VERIFY(bufsize > 0); - const uint16_t ret = tu_fifo_write_n(&s->ff, buffer, (uint16_t) bufsize); - - // flush if fifo has more than packet size or - // in rare case: fifo depth is configured too small (which never reach packet size) - if ((tu_fifo_count(&s->ff) >= s->mps) || (tu_fifo_depth(&s->ff) < s->mps)) { - tu_edpt_stream_write_xfer(s); - } - return ret; + TU_VERIFY(bufsize > 0); + const uint16_t ret = tu_fifo_write_n(&s->ff, buffer, (uint16_t) bufsize); + + // flush if fifo has more than packet size or + // in rare case: fifo depth is configured too small (which never reach packet size) + if ((tu_fifo_count(&s->ff) >= s->mps) || (tu_fifo_depth(&s->ff) < s->mps)) { + tu_edpt_stream_write_xfer(s); } + return ret; } uint32_t tu_edpt_stream_write_available(tu_edpt_stream_t *s) { - #if CFG_TUSB_EDPT_STREAM_NO_FIFO_ENABLED - if (0 == tu_fifo_depth(&s->ff)) { - // non-fifo mode - TU_VERIFY(s->ep_addr > 0); // must be opened - bool is_busy = true; - if (s->is_host) { - #if CFG_TUH_ENABLED - is_busy = usbh_edpt_busy(s->hwid, s->ep_addr); - #endif - } else { - #if CFG_TUD_ENABLED - is_busy = usbd_edpt_busy(s->hwid, s->ep_addr); - #endif - } - return is_busy ? 0 : s->ep_bufsize; - } else - #endif - { - return (uint32_t)tu_fifo_remaining(&s->ff); - } + return (uint32_t)tu_fifo_remaining(&s->ff); } //--------------------------------------------------------------------+ // Stream Read //--------------------------------------------------------------------+ uint32_t tu_edpt_stream_read_xfer(tu_edpt_stream_t *s) { - #if CFG_TUSB_EDPT_STREAM_NO_FIFO_ENABLED - if (0 == tu_fifo_depth(&s->ff)) { - // non-fifo mode: RX need ep buffer - TU_VERIFY(s->ep_buf != NULL, 0); - TU_VERIFY(stream_claim(s), 0); - TU_ASSERT(stream_xfer(s, s->ep_bufsize), 0); - return s->ep_bufsize; - } else - #endif - { - uint16_t available = tu_fifo_remaining(&s->ff); - - // Prepare for incoming data but only allow what we can store in the ring buffer. - // TODO Actually we can still carry out the transfer, keeping count of received bytes - // and slowly move it to the FIFO when read(). - // This pre-check reduces endpoint claiming - TU_VERIFY(available >= s->mps); - TU_VERIFY(stream_claim(s), 0); - available = tu_fifo_remaining(&s->ff); // re-get available since fifo can be changed - - if (available >= s->mps) { - // multiple of packet size limit by ep bufsize - uint16_t count = (uint16_t) (available & ~(s->mps - 1)); - count = tu_min16(count, s->ep_bufsize); - TU_ASSERT(stream_xfer(s, count), 0); - return count; - } else { - // Release endpoint since we don't make any transfer - stream_release(s); - return 0; - } + uint16_t available = tu_fifo_remaining(&s->ff); + + // Prepare for incoming data but only allow what we can store in the ring buffer. + // TODO Actually we can still carry out the transfer, keeping count of received bytes + // and slowly move it to the FIFO when read(). + // This pre-check reduces endpoint claiming + TU_VERIFY(available >= s->mps); + TU_VERIFY(stream_claim(s), 0); + available = tu_fifo_remaining(&s->ff); // re-get available since fifo can be changed + + if (available >= s->mps) { + // multiple of packet size limit by ep bufsize + uint16_t count = (uint16_t) (available & ~(s->mps - 1)); + count = tu_min16(count, s->ep_bufsize); + TU_ASSERT(stream_xfer(s, count), 0); + return count; + } else { + // Release endpoint since we don't make any transfer + stream_release(s); + return 0; } } -- cgit v1.3.1 From 9a731e03e89e5e9ba530354fdfe4829b4cc0a8cf Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 14 Jan 2026 13:06:49 +0700 Subject: correct dual port hil assert --- .github/workflows/build.yml | 2 +- test/hil/hil_test.py | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 781d3b002..bb8c6d65d 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -315,7 +315,7 @@ jobs: run: python3 tools/get_deps.py $BUILD_ARGS - name: Build - run: python3 tools/build.py -j 4 --toolchain iar $BUILD_ARGS + run: python3 tools/build.py --toolchain iar $BUILD_ARGS - name: Test on actual hardware (hardware in the loop) run: python3 test/hil/hil_test.py hfp.json diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index f742bbca2..b84740867 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -410,22 +410,22 @@ def test_device_cdc_dual_ports(board): sizes = [32, 64, 128, 256, 512, random.randint(2000, 5000)] def write_and_check(writer, payload): - size = len(payload) + payload_len = len(payload) for s in ser: s.reset_input_buffer() rd0 = b'' rd1 = b'' offset = 0 # Write in chunks of random 1-64 bytes (device has 64-byte buffer) - while offset < size: - chunk_size = min(random.randint(1, 64), size - offset) + while offset < payload_len: + chunk_size = min(random.randint(1, 64), payload_len - offset) ser[writer].write(payload[offset:offset + chunk_size]) ser[writer].flush() rd0 += ser[0].read(chunk_size) rd1 += ser[1].read(chunk_size) offset += chunk_size - assert rd0 == payload.lower(), f'Port0 wrong data ({size}): expected {payload.lower()[:16]}... was {rd0[:16]}' - assert rd1 == payload.upper(), f'Port1 wrong data ({size}): expected {payload.upper()[:16]}... was {rd1[:16]}' + assert rd0 == payload.lower(), f'Port0 wrong data ({payload_len}): expected {payload.lower()}... was {rd0}' + assert rd1 == payload.upper(), f'Port1 wrong data ({payload_len}): expected {payload.upper()}... was {rd1}' for size in sizes: payload0 = rand_ascii(size) -- cgit v1.3.1 From 7a4e3d0821fb7913fbcca55018b41e66a6339df6 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 14 Jan 2026 00:19:49 +0100 Subject: bsp: add STM32H747-DISCO Signed-off-by: HiFiPhile Signed-off-by: Zixun LI --- docs/reference/boards.rst | 1 + hw/bsp/stm32h7/boards/stm32h747disco/board.cmake | 23 +++ hw/bsp/stm32h7/boards/stm32h747disco/board.h | 169 +++++++++++++++++++++ hw/bsp/stm32h7/boards/stm32h747disco/board.mk | 15 ++ hw/bsp/stm32h7/linker/stm32h747xx_flash_CM7.ld | 184 +++++++++++++++++++++++ 5 files changed, 392 insertions(+) create mode 100644 hw/bsp/stm32h7/boards/stm32h747disco/board.cmake create mode 100644 hw/bsp/stm32h7/boards/stm32h747disco/board.h create mode 100644 hw/bsp/stm32h7/boards/stm32h747disco/board.mk create mode 100644 hw/bsp/stm32h7/linker/stm32h747xx_flash_CM7.ld diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index 09c90e08f..f6dd3cd91 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -292,6 +292,7 @@ stm32h723nucleo STM32 H723 Nucleo stm32h7 https://www.s stm32h743eval STM32 H743 Eval stm32h7 https://www.st.com/en/evaluation-tools/stm32h743i-eval.html stm32h743nucleo STM32 H743 Nucleo stm32h7 https://www.st.com/en/evaluation-tools/nucleo-h743zi.html stm32h745disco STM32 H745 Discovery stm32h7 https://www.st.com/en/evaluation-tools/stm32h745i-disco.html +stm32h747disco STM32 H747 Discovery stm32h7 https://www.st.com/en/evaluation-tools/stm32h747i-disco.html stm32h750_weact STM32 H750 WeAct stm32h7 https://www.adafruit.com/product/5032 stm32h750bdk STM32 H750b Discovery Kit stm32h7 https://www.st.com/en/evaluation-tools/stm32h750b-dk.html waveshare_openh743i Waveshare Open H743i stm32h7 https://www.waveshare.com/openh743i-c-standard.htm diff --git a/hw/bsp/stm32h7/boards/stm32h747disco/board.cmake b/hw/bsp/stm32h7/boards/stm32h747disco/board.cmake new file mode 100644 index 000000000..8bce542a5 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h747disco/board.cmake @@ -0,0 +1,23 @@ +set(MCU_VARIANT stm32h747xx) +set(JLINK_DEVICE stm32h747xi_m7) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash_CM7.ld) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_CM7.icf) + +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 1) +endif() + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32H747xx + HSE_VALUE=25000000 + CORE_CM7 + ) +endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h747disco/board.h b/hw/bsp/stm32h7/boards/stm32h747disco/board.h new file mode 100644 index 000000000..71e8b1427 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h747disco/board.h @@ -0,0 +1,169 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: STM32 H745 Discovery + url: https://www.st.com/en/evaluation-tools/stm32h745i-disco.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// UART +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +// USB HS External PHY Pin: CLK, STP, DIR, NXT, D0-D7 +#define ULPI_PINS \ + {GPIOA, GPIO_PIN_3 }, {GPIOA, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_0 }, {GPIOB, GPIO_PIN_1 }, \ + {GPIOB, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_10}, {GPIOB, GPIO_PIN_11}, {GPIOB, GPIO_PIN_12}, \ + {GPIOB, GPIO_PIN_13}, {GPIOC, GPIO_PIN_0 }, {GPIOH, GPIO_PIN_4 }, {GPIOI, GPIO_PIN_11} + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOI, + .pin_init = { .Pin = GPIO_PIN_12, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + } +}; + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; + RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 }; + + /*!< Supply configuration update enable */ + /* For STM32H750XB, use "HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);" */ + HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY); + + /* The voltage scaling allows optimizing the power consumption when the + device is clocked below the maximum system frequency, to update the + voltage scaling value regarding system frequency refer to product + datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.CSIState = RCC_CSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + + /* PLL1 for System Clock */ + RCC_OscInitStruct.PLL.PLLM = 5; + RCC_OscInitStruct.PLL.PLLN = 160; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLQ = 4; + + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* PLL3 for USB Clock */ + PeriphClkInitStruct.PLL3.PLL3M = 25; + PeriphClkInitStruct.PLL3.PLL3N = 336; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.PLL3.PLL3P = 2; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3Q = 7; + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure bus clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ + RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + /*activate CSI clock mondatory for I/O Compensation Cell*/ + __HAL_RCC_CSI_ENABLE() ; + + /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ + __HAL_RCC_SYSCFG_CLK_ENABLE() ; + + /* Enables the I/O Compensation Cell */ + HAL_EnableCompensationCell(); +} + +static inline void board_init2(void) { + // For this board does nothing +} + +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; + (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/stm32h7/boards/stm32h747disco/board.mk b/hw/bsp/stm32h7/boards/stm32h747disco/board.mk new file mode 100644 index 000000000..4b17246e2 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h747disco/board.mk @@ -0,0 +1,15 @@ +# STM32H747I-DISCO uses OTG_FS +# FIXME: Reset enumerates, un/replug USB plug does not enumerate +MCU_VARIANT = stm32h747xx +CFLAGS += -DSTM32H747xx -DCORE_CM7 -DHSE_VALUE=25000000 + +# Default is FulSpeed port +PORT ?= 0 + +LD_FILE_GCC = $(FAMILY_PATH)/linker/${MCU_VARIANT}_flash_CM7.ld +LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h747xx_flash_CM7.icf + +# For flash-jlink target +JLINK_DEVICE = stm32h747xi_m7 +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32h7/linker/stm32h747xx_flash_CM7.ld b/hw/bsp/stm32h7/linker/stm32h747xx_flash_CM7.ld new file mode 100644 index 000000000..5b7fe4528 --- /dev/null +++ b/hw/bsp/stm32h7/linker/stm32h747xx_flash_CM7.ld @@ -0,0 +1,184 @@ +/* +****************************************************************************** +** + +** File : LinkerScript.ld +** +** +** Abstract : Linker script for STM32H7 series +** 1024Kbytes FLASH and 192Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2019 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : + { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + .ARM : + { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} -- cgit v1.3.1 From 4ae33547e3f6b12a53941b17851716fcdf9c1f2d Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Wed, 14 Jan 2026 09:59:49 +0100 Subject: update deps Signed-off-by: Zixun LI --- tools/get_deps.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/get_deps.py b/tools/get_deps.py index 773445adc..a75f0c169 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -209,7 +209,7 @@ deps_optional = { '9442fbb71f855ff2e64fbf662b7726beba511a24', 'stm32wba'], 'hw/mcu/ti': ['https://github.com/hathach/ti_driver.git', - '143ed6cc20a7615d042b03b21e070197d473e6e5', + '083944907e7d08fcb1f614b47598ce45935b8da1', 'msp430 msp432e4 tm4c'], 'hw/mcu/wch/ch32v103': ['https://github.com/openwch/ch32v103.git', '7578cae0b21f86dd053a1f781b2fc6ab99d0ec17', -- cgit v1.3.1 From 46af312b610f6d85196f41ca3f1b80bc7e8ccfac Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Wed, 14 Jan 2026 10:12:54 +0100 Subject: ci fix Signed-off-by: Zixun LI --- hw/bsp/tm4c/family.cmake | 3 +++ 1 file changed, 3 insertions(+) diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index 9cef96b9d..41b8a597a 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -71,6 +71,9 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) endif () # Flashing -- cgit v1.3.1 From b03a87731cb38d7f1fbf82f07886e071f0a48bbf Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 15 Jan 2026 19:13:02 +0100 Subject: dcd/musb: fix unaligned cast Signed-off-by: HiFiPhile --- src/portable/mentor/musb/dcd_musb.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index f0c5aa722..06f62b0d3 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -32,12 +32,6 @@ #define MUSB_DEBUG 2 #define MUSB_REGS(rhport) ((musb_regs_t*) MUSB_BASES[rhport]) -#if __GNUC__ > 8 && defined(__ARM_FEATURE_UNALIGNED) -/* GCC warns that an address may be unaligned, even though - * the target CPU has the capability for unaligned memory access. */ -_Pragma("GCC diagnostic ignored \"-Waddress-of-packed-member\""); -#endif - #include "musb_type.h" #include "device/dcd.h" @@ -73,7 +67,10 @@ typedef struct TU_ATTR_PACKED typedef struct { - tusb_control_request_t setup_packet; + union { + tusb_control_request_t setup_packet; + uint32_t setup_buffer[2]; + }; uint16_t remaining_ctrl; /* The number of bytes remaining in data stage of control transfer. */ int8_t status_out; pipe_state_t pipe0; @@ -174,9 +171,8 @@ static void process_setup_packet(uint8_t rhport) { musb_regs_t* musb_regs = MUSB_REGS(rhport); // Read setup packet - uint32_t *p = (void*)&_dcd.setup_packet; - p[0] = musb_regs->fifo[0]; - p[1] = musb_regs->fifo[0]; + _dcd.setup_buffer[0] = musb_regs->fifo[0]; + _dcd.setup_buffer[1] = musb_regs->fifo[0]; _dcd.pipe0.buf = NULL; _dcd.pipe0.length = 0; -- cgit v1.3.1 From 8ef8ee1946f3c0f600500eb49b2b0c1352f8dcb8 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 15 Jan 2026 19:13:18 +0100 Subject: dcd/musb: fix zlp IN Signed-off-by: HiFiPhile --- src/portable/mentor/musb/dcd_musb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index 06f62b0d3..9e6ee6f5d 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -189,14 +189,14 @@ static void process_setup_packet(uint8_t rhport) { } } -static bool handle_xfer_in(uint8_t rhport, uint_fast8_t ep_addr) +static bool handle_xfer_in(uint8_t rhport, uint_fast8_t ep_addr, bool is_zlp) { unsigned epnum = tu_edpt_number(ep_addr); unsigned epnum_minus1 = epnum - 1; pipe_state_t *pipe = &_dcd.pipe[tu_edpt_dir(ep_addr)][epnum_minus1]; const unsigned rem = pipe->remaining; - if (!rem) { + if (!rem && !is_zlp) { pipe->buf = NULL; return true; } @@ -268,7 +268,7 @@ static bool edpt_n_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16 pipe->remaining = total_bytes; if (dir_in) { - handle_xfer_in(rhport, ep_addr); + handle_xfer_in(rhport, ep_addr, total_bytes == 0); } else { musb_regs_t* musb_regs = MUSB_REGS(rhport); musb_ep_csr_t* ep_csr = get_ep_csr(musb_regs, epnum); @@ -445,7 +445,7 @@ static void process_edpt_n(uint8_t rhport, uint_fast8_t ep_addr) ep_csr->tx_csrl &= ~(MUSB_TXCSRL1_STALLED | MUSB_TXCSRL1_UNDRN); return; } - completed = handle_xfer_in(rhport, ep_addr); + completed = handle_xfer_in(rhport, ep_addr, false); } else { // TU_LOG1(" RX CSRL%d = %x\r\n", epn, ep_csr->rx_csrl); if (ep_csr->rx_csrl & MUSB_RXCSRL1_STALLED) { -- cgit v1.3.1 From 042ebc04b325f95d593d337317709adc74e7b435 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 16 Jan 2026 16:17:05 +0100 Subject: fix stream write racing Signed-off-by: HiFiPhile --- src/tusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/tusb.c b/src/tusb.c index bf82cdbe9..6075e9db4 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -392,7 +392,7 @@ uint32_t tu_edpt_stream_write_xfer(tu_edpt_stream_t *s) { // Pull data from FIFO -> EP buf uint16_t count; if (s->ep_buf == NULL) { - count = ff_count; + count = tu_fifo_count(&s->ff); // re-get count since fifo can be changed } else { count = tu_fifo_read_n(&s->ff, s->ep_buf, s->ep_bufsize); } -- cgit v1.3.1 From 5ad42064ea544080d47c893dafb1b41447ab9f32 Mon Sep 17 00:00:00 2001 From: Michael Rogov Papernov Date: Sat, 10 Jan 2026 17:58:41 +0000 Subject: Integrate MemBrowse --- .github/membrowse-targets.json | 662 ++++++++++++++++++++++++++++++++ .github/workflows/build.yml | 137 +++++-- .github/workflows/build_util.yml | 14 + .github/workflows/membrowse-comment.yml | 44 +++ .github/workflows/membrowse-onboard.yml | 58 +++ .github/workflows/membrowse-report.yml | 101 +++++ README.rst | 4 +- 7 files changed, 989 insertions(+), 31 deletions(-) create mode 100644 .github/membrowse-targets.json create mode 100644 .github/workflows/membrowse-comment.yml create mode 100644 .github/workflows/membrowse-onboard.yml create mode 100644 .github/workflows/membrowse-report.yml diff --git a/.github/membrowse-targets.json b/.github/membrowse-targets.json new file mode 100644 index 000000000..80dd158a8 --- /dev/null +++ b/.github/membrowse-targets.json @@ -0,0 +1,662 @@ +[ + { + "target_name": "at32f402_405-at_start_f402", + "port": "at32f402_405", + "board": "at_start_f402", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f402_405", + "build_cmd": "python3 tools/build.py -s cmake -b at_start_f402", + "elf": "cmake-build/cmake-build-at_start_f402/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/artery/at32f402_405/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F402xC_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "at32f403a_407-at32f403a_weact_blackpill", + "port": "at32f403a_407", + "board": "at32f403a_weact_blackpill", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f403a_407", + "build_cmd": "python3 tools/build.py -s cmake -b at32f403a_weact_blackpill", + "elf": "cmake-build/cmake-build-at32f403a_weact_blackpill/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/artery/at32f403a_407/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F403AxC_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "at32f413-at_start_f413", + "port": "at32f413", + "board": "at_start_f413", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f413", + "build_cmd": "python3 tools/build.py -s cmake -b at_start_f413", + "elf": "cmake-build/cmake-build-at_start_f413/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/artery/at32f413/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413xC_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "at32f415-at_start_f415", + "port": "at32f415", + "board": "at_start_f415", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f415", + "build_cmd": "python3 tools/build.py -s cmake -b at_start_f415", + "elf": "cmake-build/cmake-build-at_start_f415/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/artery/at32f415/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F415xC_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "at32f423-at_start_f423", + "port": "at32f423", + "board": "at_start_f423", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f423", + "build_cmd": "python3 tools/build.py -s cmake -b at_start_f423", + "elf": "cmake-build/cmake-build-at_start_f423/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/artery/at32f423/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F423xC_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "at32f425-at_start_f425", + "port": "at32f425", + "board": "at_start_f425", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f425", + "build_cmd": "python3 tools/build.py -s cmake -b at_start_f425", + "elf": "cmake-build/cmake-build-at_start_f425/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/artery/at32f425/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F425x8_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "at32f435_437-at_start_f435", + "port": "at32f435_437", + "board": "at_start_f435", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f435_437", + "build_cmd": "python3 tools/build.py -s cmake -b at_start_f435", + "elf": "cmake-build/cmake-build-at_start_f435/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/artery/at32f435_437/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F435xM_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "broadcom_32bit-raspberrypi_zero", + "port": "broadcom_32bit", + "board": "raspberrypi_zero", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py broadcom_32bit", + "build_cmd": "python3 tools/build.py -s cmake -b raspberrypi_zero", + "elf": "cmake-build/cmake-build-raspberrypi_zero/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/broadcom/broadcom/link.ld", + "linker_vars": "" + }, + { + "target_name": "broadcom_64bit-raspberrypi_cm4", + "port": "broadcom_64bit", + "board": "raspberrypi_cm4", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.xz && tar -C $HOME/toolchain -xf toolchain.tar.xz && echo \"$HOME/toolchain/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py broadcom_64bit", + "build_cmd": "python3 tools/build.py -s cmake -b raspberrypi_cm4", + "elf": "cmake-build/cmake-build-raspberrypi_cm4/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/broadcom/broadcom/link8.ld", + "linker_vars": "" + }, + { + "target_name": "ch32v10x-ch32v103r_r1_1v0", + "port": "ch32v10x", + "board": "ch32v103r_r1_1v0", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py ch32v10x", + "build_cmd": "python3 tools/build.py -s cmake -b ch32v103r_r1_1v0", + "elf": "cmake-build/cmake-build-ch32v103r_r1_1v0/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/ch32v10x/linker/ch32v10x.ld", + "linker_vars": "__FLASH_SIZE=64K __RAM_SIZE=20K" + }, + { + "target_name": "ch32v20x-ch32v203c_r0_1v0", + "port": "ch32v20x", + "board": "ch32v203c_r0_1v0", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py ch32v20x", + "build_cmd": "python3 tools/build.py -s cmake -b ch32v203c_r0_1v0", + "elf": "cmake-build/cmake-build-ch32v203c_r0_1v0/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/ch32v20x/linker/ch32v20x.ld", + "linker_vars": "__flash_size=64K __ram_size=20K" + }, + { + "target_name": "ch32v30x-ch32v307v_r1_1v0", + "port": "ch32v30x", + "board": "ch32v307v_r1_1v0", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py ch32v30x", + "build_cmd": "python3 tools/build.py -s cmake -b ch32v307v_r1_1v0", + "elf": "cmake-build/cmake-build-ch32v307v_r1_1v0/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/ch32v30x/linker/ch32v30x.ld", + "linker_vars": "__flash_size=128K __ram_size=32K" + }, + { + "target_name": "da1469x-da14695_dk_usb", + "port": "da1469x", + "board": "da14695_dk_usb", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py da1469x", + "build_cmd": "python3 tools/build.py -s cmake -b da14695_dk_usb", + "elf": "cmake-build/cmake-build-da14695_dk_usb/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/da1469x/linker/da1469x.ld", + "linker_vars": "" + }, + { + "target_name": "fomu-fomu", + "port": "fomu", + "board": "fomu", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py fomu", + "build_cmd": "python3 tools/build.py -s cmake -b fomu", + "elf": "cmake-build/cmake-build-fomu/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/fomu/fomu.ld", + "linker_vars": "" + }, + { + "target_name": "gd32vf103-sipeed_longan_nano", + "port": "gd32vf103", + "board": "sipeed_longan_nano", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py gd32vf103", + "build_cmd": "python3 tools/build.py -s cmake -b sipeed_longan_nano", + "elf": "cmake-build/cmake-build-sipeed_longan_nano/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/gd/nuclei-sdk/SoC/gd32vf103/Board/gd32vf103c_longan_nano/Source/GCC/gcc_gd32vf103xb_flashxip.ld", + "linker_vars": "__ROM_BASE=0x08000000 __ROM_SIZE=0x00020000 __RAM_BASE=0x20000000 __RAM_SIZE=0x00008000" + }, + { + "target_name": "hpmicro-hpm6750evk2", + "port": "hpmicro", + "board": "hpm6750evk2", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py hpmicro", + "build_cmd": "python3 tools/build.py -s cmake -b hpm6750evk2", + "elf": "cmake-build/cmake-build-hpm6750evk2/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/hpmicro/hpm_sdk/soc/HPM6700/HPM6750/toolchains/gcc/flash_xip.ld", + "linker_vars": "_flash_size=16M _stack_size=16K _heap_size=16K" + }, + { + "target_name": "imxrt-metro_m7_1011", + "port": "imxrt", + "board": "metro_m7_1011", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py imxrt", + "build_cmd": "python3 tools/build.py -s cmake -b metro_m7_1011", + "elf": "cmake-build/cmake-build-metro_m7_1011/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/nxp/mcux-sdk/devices/MIMXRT1011/gcc/MIMXRT1011xxxxx_flexspi_nor.ld", + "linker_vars": "" + }, + { + "target_name": "kinetis_k-frdm_k64f", + "port": "kinetis_k", + "board": "frdm_k64f", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py kinetis_k kinetis_kl", + "build_cmd": "python3 tools/build.py -s cmake -b frdm_k64f", + "elf": "cmake-build/cmake-build-frdm_k64f/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/nxp/mcux-sdk/devices/MK64F12/gcc/MK64FN1M0xxx12_flash.ld", + "linker_vars": "" + }, + { + "target_name": "kinetis_k32l2-frdm_k32l2a4s", + "port": "kinetis_k32l2", + "board": "frdm_k32l2a4s", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py kinetis_k32l2", + "build_cmd": "python3 tools/build.py -s cmake -b frdm_k32l2a4s", + "elf": "cmake-build/cmake-build-frdm_k32l2a4s/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/nxp/mcux-sdk/devices/K32L2A41A/gcc/K32L2A41xxxxA_flash.ld", + "linker_vars": "" + }, + { + "target_name": "kinetis_kl-frdm_kl25z", + "port": "kinetis_kl", + "board": "frdm_kl25z", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py kinetis_kl", + "build_cmd": "python3 tools/build.py -s cmake -b frdm_kl25z", + "elf": "cmake-build/cmake-build-frdm_kl25z/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/kinetis_kl/gcc/MKL25Z128xxx4_flash.ld", + "linker_vars": "" + }, + { + "target_name": "lpc11-lpcxpresso11u37", + "port": "lpc11", + "board": "lpcxpresso11u37", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc11", + "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso11u37", + "elf": "cmake-build/cmake-build-lpcxpresso11u37/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/lpc11/boards/lpcxpresso11u37/lpc11u37.ld", + "linker_vars": "" + }, + { + "target_name": "lpc13-lpcxpresso1347", + "port": "lpc13", + "board": "lpcxpresso1347", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc13", + "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso1347", + "elf": "cmake-build/cmake-build-lpcxpresso1347/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/lpc13/boards/lpcxpresso1347/lpc1347.ld", + "linker_vars": "" + }, + { + "target_name": "lpc15-lpcxpresso1549", + "port": "lpc15", + "board": "lpcxpresso1549", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc15", + "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso1549", + "elf": "cmake-build/cmake-build-lpcxpresso1549/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld", + "linker_vars": "" + }, + { + "target_name": "lpc17-lpcxpresso1769", + "port": "lpc17", + "board": "lpcxpresso1769", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc17", + "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso1769", + "elf": "cmake-build/cmake-build-lpcxpresso1769/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld", + "linker_vars": "" + }, + { + "target_name": "lpc18-lpcxpresso18s37", + "port": "lpc18", + "board": "lpcxpresso18s37", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc18", + "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso18s37", + "elf": "cmake-build/cmake-build-lpcxpresso18s37/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld", + "linker_vars": "" + }, + { + "target_name": "lpc40-ea4088_quickstart", + "port": "lpc40", + "board": "ea4088_quickstart", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc40", + "build_cmd": "python3 tools/build.py -s cmake -b ea4088_quickstart", + "elf": "cmake-build/cmake-build-ea4088_quickstart/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/lpc40/boards/ea4088_quickstart/lpc4088.ld", + "linker_vars": "" + }, + { + "target_name": "lpc43-ea4357", + "port": "lpc43", + "board": "ea4357", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc43", + "build_cmd": "python3 tools/build.py -s cmake -b ea4357", + "elf": "cmake-build/cmake-build-ea4357/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/lpc43/boards/ea4357/lpc4357.ld", + "linker_vars": "" + }, + { + "target_name": "lpc51-lpcxpresso51u68", + "port": "lpc51", + "board": "lpcxpresso51u68", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc51", + "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso51u68", + "elf": "cmake-build/cmake-build-lpcxpresso51u68/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/nxp/mcux-sdk/devices/LPC51U68/gcc/LPC51U68_flash.ld", + "linker_vars": "" + }, + { + "target_name": "lpc54-lpcxpresso54114", + "port": "lpc54", + "board": "lpcxpresso54114", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc54", + "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso54114", + "elf": "cmake-build/cmake-build-lpcxpresso54114/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/nxp/mcux-sdk/devices/LPC54114/gcc/LPC54114J256_cm4_flash.ld", + "linker_vars": "" + }, + { + "target_name": "lpc55-double_m33_express", + "port": "lpc55", + "board": "double_m33_express", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc55", + "build_cmd": "python3 tools/build.py -s cmake -b double_m33_express", + "elf": "cmake-build/cmake-build-double_m33_express/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld", + "linker_vars": "" + }, + { + "target_name": "maxim-apard32690", + "port": "maxim", + "board": "apard32690", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py maxim", + "build_cmd": "python3 tools/build.py -s cmake -b apard32690", + "elf": "cmake-build/cmake-build-apard32690/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/maxim/linker/max32690.ld", + "linker_vars": "" + }, + { + "target_name": "mcx-frdm_mcxa153", + "port": "mcx", + "board": "frdm_mcxa153", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py mcx", + "build_cmd": "python3 tools/build.py -s cmake -b frdm_mcxa153", + "elf": "cmake-build/cmake-build-frdm_mcxa153/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/nxp/mcux-sdk/devices/MCXA153/gcc/MCXA153_flash.ld", + "linker_vars": "" + }, + { + "target_name": "mm32-mm32f327x_mb39", + "port": "mm32", + "board": "mm32f327x_mb39", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py mm32", + "build_cmd": "python3 tools/build.py -s cmake -b mm32f327x_mb39", + "elf": "cmake-build/cmake-build-mm32f327x_mb39/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld", + "linker_vars": "" + }, + { + "target_name": "msp430-msp_exp430f5529lp", + "port": "msp430", + "board": "msp_exp430f5529lp", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.bz2 && tar -C $HOME/toolchain -xf toolchain.tar.bz2 && echo \"$HOME/toolchain/msp430-gcc-9.2.0.50_linux64/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py msp430", + "build_cmd": "python3 tools/build.py -s cmake -b msp_exp430f5529lp", + "elf": "cmake-build/cmake-build-msp_exp430f5529lp/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/ti/msp430/msp430-gcc-support-files/include/msp430f5529.ld", + "linker_vars": "" + }, + { + "target_name": "msp432e4-msp_exp432e401y", + "port": "msp432e4", + "board": "msp_exp432e401y", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py msp432e4", + "build_cmd": "python3 tools/build.py -s cmake -b msp_exp432e401y", + "elf": "cmake-build/cmake-build-msp_exp432e401y/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/ti/msp432e4/Source/msp432e411y.ld", + "linker_vars": "" + }, + { + "target_name": "nrf-adafruit_clue", + "port": "nrf", + "board": "adafruit_clue", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nrf", + "build_cmd": "python3 tools/build.py -s cmake -b adafruit_clue", + "elf": "cmake-build/cmake-build-adafruit_clue/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/nrf/linker/nrf52840_xxaa.ld", + "linker_vars": "" + }, + { + "target_name": "nuc100_120-nutiny_sdk_nuc120", + "port": "nuc100_120", + "board": "nutiny_sdk_nuc120", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nuc100_120", + "build_cmd": "python3 tools/build.py -s cmake -b nutiny_sdk_nuc120", + "elf": "cmake-build/cmake-build-nutiny_sdk_nuc120/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/nuc120_flash.ld", + "linker_vars": "" + }, + { + "target_name": "nuc121_125-nutiny_sdk_nuc121", + "port": "nuc121_125", + "board": "nutiny_sdk_nuc121", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nuc121_125", + "build_cmd": "python3 tools/build.py -s cmake -b nutiny_sdk_nuc121", + "elf": "cmake-build/cmake-build-nutiny_sdk_nuc121/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/nuc121_flash.ld", + "linker_vars": "" + }, + { + "target_name": "nuc126-nutiny_nuc126v", + "port": "nuc126", + "board": "nutiny_nuc126v", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nuc126", + "build_cmd": "python3 tools/build.py -s cmake -b nutiny_nuc126v", + "elf": "cmake-build/cmake-build-nutiny_nuc126v/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/nuc126/boards/nutiny_nuc126v/nuc126_flash.ld", + "linker_vars": "" + }, + { + "target_name": "nuc505-nutiny_sdk_nuc505", + "port": "nuc505", + "board": "nutiny_sdk_nuc505", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nuc505", + "build_cmd": "python3 tools/build.py -s cmake -b nutiny_sdk_nuc505", + "elf": "cmake-build/cmake-build-nutiny_sdk_nuc505/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/nuc505/boards/nutiny_sdk_nuc505/nuc505_flashtoram.ld", + "linker_vars": "" + }, + { + "target_name": "ra-portenta_c33", + "port": "ra", + "board": "portenta_c33", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py ra", + "build_cmd": "python3 tools/build.py -s cmake -b portenta_c33", + "elf": "cmake-build/cmake-build-portenta_c33/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld hw/bsp/ra/boards/portenta_c33/script/fsp.ld", + "linker_vars": "" + }, + { + "target_name": "rw61x-frdm_rw612", + "port": "rw61x", + "board": "frdm_rw612", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py rw61x", + "build_cmd": "python3 tools/build.py -s cmake -b frdm_rw612", + "elf": "cmake-build/cmake-build-frdm_rw612/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/nxp/mcux-sdk/devices/RW612/gcc/RW612_flash.ld", + "linker_vars": "" + }, + { + "target_name": "samd11-cynthion_d11", + "port": "samd11", + "board": "cynthion_d11", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py samd11", + "build_cmd": "python3 tools/build.py -s cmake -b cynthion_d11", + "elf": "cmake-build/cmake-build-cynthion_d11/device/hid_composite/hid_composite.elf", + "ld": "hw/bsp/samd11/boards/cynthion_d11/cynthion_d11.ld", + "linker_vars": "BOOTLOADER_SIZE=0x800" + }, + { + "target_name": "samd5x_e5x-d5035_01", + "port": "samd5x_e5x", + "board": "d5035_01", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py samd5x_e5x", + "build_cmd": "python3 tools/build.py -s cmake -b d5035_01", + "elf": "cmake-build/cmake-build-d5035_01/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/samd5x_e5x/boards/d5035_01/same51j19a_flash.ld", + "linker_vars": "" + }, + { + "target_name": "samg-samg55_xplained", + "port": "samg", + "board": "samg55_xplained", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py samg", + "build_cmd": "python3 tools/build.py -s cmake -b samg55_xplained", + "elf": "cmake-build/cmake-build-samg55_xplained/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/samg/boards/samg55_xplained/samg55j19_flash.ld", + "linker_vars": "" + }, + { + "target_name": "stm32c0-stm32c071nucleo", + "port": "stm32c0", + "board": "stm32c071nucleo", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32c0", + "build_cmd": "python3 tools/build.py -s cmake -b stm32c071nucleo", + "elf": "cmake-build/cmake-build-stm32c071nucleo/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32f0-stm32f070rbnucleo", + "port": "stm32f0", + "board": "stm32f070rbnucleo", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f0", + "build_cmd": "python3 tools/build.py -s cmake -b stm32f070rbnucleo", + "elf": "cmake-build/cmake-build-stm32f070rbnucleo/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld", + "linker_vars": "" + }, + { + "target_name": "stm32f1-stm32f103_bluepill", + "port": "stm32f1", + "board": "stm32f103_bluepill", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f1", + "build_cmd": "python3 tools/build.py -s cmake -b stm32f103_bluepill", + "elf": "cmake-build/cmake-build-stm32f103_bluepill/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32f2-stm32f207nucleo", + "port": "stm32f2", + "board": "stm32f207nucleo", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f2", + "build_cmd": "python3 tools/build.py -s cmake -b stm32f207nucleo", + "elf": "cmake-build/cmake-build-stm32f207nucleo/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32f2/boards/stm32f207nucleo/STM32F207ZGTx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32f3-stm32f303disco", + "port": "stm32f3", + "board": "stm32f303disco", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f3", + "build_cmd": "python3 tools/build.py -s cmake -b stm32f303disco", + "elf": "cmake-build/cmake-build-stm32f303disco/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32f3/boards/stm32f303disco/STM32F303VCTx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32f4-feather_stm32f405", + "port": "stm32f4", + "board": "feather_stm32f405", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f4", + "build_cmd": "python3 tools/build.py -s cmake -b feather_stm32f405", + "elf": "cmake-build/cmake-build-feather_stm32f405/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32f7-stlinkv3mini", + "port": "stm32f7", + "board": "stlinkv3mini", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f7", + "build_cmd": "python3 tools/build.py -s cmake -b stlinkv3mini", + "elf": "cmake-build/cmake-build-stlinkv3mini/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32g0-stm32g0b1nucleo", + "port": "stm32g0", + "board": "stm32g0b1nucleo", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32g0", + "build_cmd": "python3 tools/build.py -s cmake -b stm32g0b1nucleo", + "elf": "cmake-build/cmake-build-stm32g0b1nucleo/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32g0/boards/stm32g0b1nucleo/STM32G0B1RETx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32g4-b_g474e_dpow1", + "port": "stm32g4", + "board": "b_g474e_dpow1", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32g4", + "build_cmd": "python3 tools/build.py -s cmake -b b_g474e_dpow1", + "elf": "cmake-build/cmake-build-b_g474e_dpow1/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32g4/boards/b_g474e_dpow1/STM32G474RETx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32h5-stm32h503nucleo", + "port": "stm32h5", + "board": "stm32h503nucleo", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32h5", + "build_cmd": "python3 tools/build.py -s cmake -b stm32h503nucleo", + "elf": "cmake-build/cmake-build-stm32h503nucleo/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32h7-daisyseed", + "port": "stm32h7", + "board": "daisyseed", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32h7", + "build_cmd": "python3 tools/build.py -s cmake -b daisyseed", + "elf": "cmake-build/cmake-build-daisyseed/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_ram.ld", + "linker_vars": "" + }, + { + "target_name": "stm32h7rs-stm32h7s3nucleo", + "port": "stm32h7rs", + "board": "stm32h7s3nucleo", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32h7rs", + "build_cmd": "python3 tools/build.py -s cmake -b stm32h7s3nucleo", + "elf": "cmake-build/cmake-build-stm32h7s3nucleo/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32h7rs/linker/stm32h7s3xx_flash.ld", + "linker_vars": "__FLASH_BEGIN=0x08000000 __FLASH_SIZE=0x00010000 __RAM_BEGIN=0x24000000 __RAM_SIZE=0x4FC00 __RAM_NONCACHEABLEBUFFER_SIZE=0x400" + }, + { + "target_name": "stm32l0-stm32l052dap52", + "port": "stm32l0", + "board": "stm32l052dap52", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32l0", + "build_cmd": "python3 tools/build.py -s cmake -b stm32l052dap52", + "elf": "cmake-build/cmake-build-stm32l052dap52/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32l4-stm32l412nucleo", + "port": "stm32l4", + "board": "stm32l412nucleo", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32l4", + "build_cmd": "python3 tools/build.py -s cmake -b stm32l412nucleo", + "elf": "cmake-build/cmake-build-stm32l412nucleo/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32n6-stm32n6570dk", + "port": "stm32n6", + "board": "stm32n6570dk", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32n6", + "build_cmd": "python3 tools/build.py -s cmake -b stm32n6570dk", + "elf": "cmake-build/cmake-build-stm32n6570dk/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32n6/boards/stm32n6570dk/STM32N657XX_AXISRAM2_fsbl.ld", + "linker_vars": "" + }, + { + "target_name": "stm32u0-stm32u083cdk", + "port": "stm32u0", + "board": "stm32u083cdk", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32u0", + "build_cmd": "python3 tools/build.py -s cmake -b stm32u083cdk", + "elf": "cmake-build/cmake-build-stm32u083cdk/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32u0/boards/stm32u083cdk/STM32U083MCTx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32u5-b_u585i_iot2a", + "port": "stm32u5", + "board": "b_u585i_iot2a", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32u5", + "build_cmd": "python3 tools/build.py -s cmake -b b_u585i_iot2a", + "elf": "cmake-build/cmake-build-b_u585i_iot2a/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32u5/linker/STM32U5A9xx_FLASH.ld", + "linker_vars": "" + }, + { + "target_name": "stm32wb-stm32wb55nucleo", + "port": "stm32wb", + "board": "stm32wb55nucleo", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32wb", + "build_cmd": "python3 tools/build.py -s cmake -b stm32wb55nucleo", + "elf": "cmake-build/cmake-build-stm32wb55nucleo/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld", + "linker_vars": "" + }, + { + "target_name": "stm32wba-stm32wba_nucleo", + "port": "stm32wba", + "board": "stm32wba_nucleo", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32wba", + "build_cmd": "python3 tools/build.py -s cmake -b stm32wba_nucleo", + "elf": "cmake-build/cmake-build-stm32wba_nucleo/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/stm32wba/linker/STM32WBA65xx_FLASH_ns.ld", + "linker_vars": "" + }, + { + "target_name": "tm4c-ek_tm4c123gxl", + "port": "tm4c", + "board": "ek_tm4c123gxl", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py tm4c", + "build_cmd": "python3 tools/build.py -s cmake -b ek_tm4c123gxl", + "elf": "cmake-build/cmake-build-ek_tm4c123gxl/device/cdc_msc/cdc_msc.elf", + "ld": "hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld", + "linker_vars": "" + }, + { + "target_name": "xmc4000-xmc4500_relax", + "port": "xmc4000", + "board": "xmc4500_relax", + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py xmc4000", + "build_cmd": "python3 tools/build.py -s cmake -b xmc4500_relax", + "elf": "cmake-build/cmake-build-xmc4500_relax/device/cdc_msc/cdc_msc.elf", + "ld": "hw/mcu/infineon/mtb-xmclib-cat3/CMSIS/Infineon/COMPONENT_XMC4500/Source/TOOLCHAIN_GCC_ARM/XMC4500x1024.ld", + "linker_vars": "" + } +] diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index bb8c6d65d..dc5b1975e 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -3,30 +3,8 @@ name: Build on: workflow_dispatch: push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/build.py' - - 'tools/get_deps.py' - - '.github/actions/**' - - '.github/workflows/build.yml' - - '.github/workflows/build_util.yml' - - '.github/workflows/ci_set_matrix.py' + branches: [master] pull_request: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - 'tools/build.py' - - 'tools/get_deps.py' - - '.github/actions/**' - - '.github/workflows/build.yml' - - '.github/workflows/build_util.yml' - - '.github/workflows/ci_set_matrix.py' release: types: [ published ] concurrency: @@ -37,7 +15,44 @@ env: HIL_JSON: test/hil/tinyusb.json jobs: + # Check if code paths changed (skip builds if doc-only) + check-paths: + if: github.event_name == 'pull_request' || github.event_name == 'push' + runs-on: ubuntu-latest + permissions: + contents: read + pull-requests: read + outputs: + code_changed: ${{ steps.filter.outputs.code }} + steps: + - uses: actions/checkout@v6 + with: + fetch-depth: 2 # Needed for push commit comparison + - uses: dorny/paths-filter@v3 + id: filter + with: + filters: | + code: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'test/hil/**' + - 'tools/build.py' + - 'tools/get_deps.py' + - '.github/actions/**' + - '.github/workflows/build.yml' + - '.github/workflows/build_util.yml' + - '.github/workflows/ci_set_matrix.py' + set-matrix: + needs: [check-paths] + if: | + always() && ( + github.event_name == 'release' || + github.event_name == 'workflow_dispatch' || + needs.check-paths.outputs.code_changed == 'true' + ) runs-on: ubuntu-latest outputs: json: ${{ steps.set-matrix-json.outputs.matrix }} @@ -82,6 +97,7 @@ jobs: build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain]) }} build-options: '--one-first' upload-metrics: true + upload-artifacts: true code-metrics: needs: cmake @@ -181,7 +197,8 @@ jobs: # Build Make/CMake on Windows/MacOS # --------------------------------------- build-os: - if: github.event_name == 'pull_request' + needs: [check-paths] + if: needs.check-paths.outputs.code_changed == 'true' uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -198,7 +215,8 @@ jobs: # Zephyr # --------------------------------------- zephyr: - if: github.event_name == 'push' + needs: [check-paths] + if: needs.check-paths.outputs.code_changed == 'true' runs-on: ubuntu-latest steps: - name: Checkout TinyUSB @@ -220,10 +238,10 @@ jobs: # Run on PR only (hil-tinyusb), hil-hfp only run on non-forked PR # --------------------------------------- hil-build: + needs: [check-paths, set-matrix] if: | github.repository_owner == 'hathach' && - (github.event_name == 'pull_request' || github.event_name == 'workflow_dispatch') - needs: set-matrix + (github.event_name == 'workflow_dispatch' || needs.check-paths.outputs.code_changed == 'true') uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -242,8 +260,10 @@ jobs: # self-hosted on local VM, for attached hardware checkout HIL_JSON # --------------------------------------- hil-tinyusb: - if: github.repository_owner == 'hathach' && github.event_name != 'push' - needs: hil-build + needs: [check-paths, hil-build] + if: | + github.repository_owner == 'hathach' && + (github.event_name == 'release' || github.event_name == 'workflow_dispatch' || needs.check-paths.outputs.code_changed == 'true') runs-on: [ self-hosted, X64, hathach, hardware-in-the-loop ] steps: - name: Get Skip Boards from previous run @@ -283,10 +303,11 @@ jobs: # Since IAR Token secret is not passed to forked PR, only build non-forked PR # --------------------------------------- hil-hfp: + needs: [check-paths] if: | github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false && - github.event_name != 'push' + (github.event_name == 'release' || github.event_name == 'workflow_dispatch' || needs.check-paths.outputs.code_changed == 'true') runs-on: [ self-hosted, Linux, X64, hifiphile ] env: IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} @@ -319,3 +340,59 @@ jobs: - name: Test on actual hardware (hardware in the loop) run: python3 test/hil/hil_test.py hfp.json + + # --------------------------------------- + # Membrowse Memory Analysis + # Push: always runs (uses identical for doc-only to maintain commit chain) + # PR: only runs if code changed (doc-only PRs skip entirely) + # --------------------------------------- + membrowse: + needs: [check-paths, cmake] + if: | + always() && !cancelled() && ( + github.event_name == 'push' || + github.event_name == 'release' || + github.event_name == 'workflow_dispatch' || + (github.event_name == 'pull_request' && needs.check-paths.outputs.code_changed == 'true') + ) + permissions: + contents: read + actions: read + uses: ./.github/workflows/membrowse-report.yml + with: + code_changed: ${{ needs.check-paths.outputs.code_changed == 'true' || github.event_name == 'release' || github.event_name == 'workflow_dispatch' }} + secrets: inherit + + membrowse-comment: + needs: [check-paths, membrowse] + if: > + always() && + github.event_name == 'pull_request' && + needs.check-paths.outputs.code_changed == 'true' + runs-on: ubuntu-latest + permissions: + contents: read + actions: read + steps: + - name: Checkout repository + uses: actions/checkout@v6 + + - name: Download report artifacts + id: download + uses: actions/download-artifact@v5 + with: + pattern: membrowse-report-* + path: reports + merge-multiple: true + continue-on-error: true + + - name: Save PR number + if: steps.download.outcome == 'success' + run: echo ${{ github.event.number }} > reports/pr_number.txt + + - name: Upload Membrowse Comment Artifact + if: steps.download.outcome == 'success' + uses: actions/upload-artifact@v5 + with: + name: membrowse-comment + path: reports/ diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 540ee8b47..e0fef7ce4 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -73,6 +73,19 @@ jobs: name: metrics-${{ matrix.arg }} path: cmake-build/cmake-build-*/metrics.json + - name: Copy linker scripts for artifacts + if: ${{ inputs.upload-artifacts }} + run: | + for dir in cmake-build/cmake-build-*; do + board=$(basename "$dir" | sed 's/cmake-build-//') + ld_path=$(jq -r --arg b "$board" '.[] | select(.board == $b) | .ld // empty' .github/membrowse-targets.json) + if [ -n "$ld_path" ] && [ -f "$ld_path" ]; then + mkdir -p "cmake-build/$(dirname "$ld_path")" + cp "$ld_path" "cmake-build/$ld_path" + fi + done + shell: bash + - name: Upload Artifacts for Hardware Testing if: ${{ inputs.upload-artifacts }} uses: actions/upload-artifact@v5 @@ -86,3 +99,4 @@ jobs: cmake-build/cmake-build-*/*/*/partition_table/partition-table.bin cmake-build/cmake-build-*/*/*/config.env cmake-build/cmake-build-*/*/*/flash_args + cmake-build/hw/mcu/**/*.ld diff --git a/.github/workflows/membrowse-comment.yml b/.github/workflows/membrowse-comment.yml new file mode 100644 index 000000000..a3db37360 --- /dev/null +++ b/.github/workflows/membrowse-comment.yml @@ -0,0 +1,44 @@ +name: Membrowse Comment + +on: + workflow_run: + workflows: ["Build"] + types: + - completed + +jobs: + post-comment: + runs-on: ubuntu-latest + if: > + github.event.workflow_run.event == 'pull_request' && + github.event.workflow_run.conclusion == 'success' + permissions: + actions: read + pull-requests: write + steps: + - name: Download Artifacts + id: download + uses: actions/download-artifact@v5 + with: + run-id: ${{ github.event.workflow_run.id }} + github-token: ${{ secrets.GITHUB_TOKEN }} + name: membrowse-comment + path: reports + continue-on-error: true + + - name: Read PR Number + if: steps.download.outcome == 'success' + id: pr_number + run: | + if [ -f reports/pr_number.txt ]; then + echo "number=$(cat reports/pr_number.txt)" >> $GITHUB_OUTPUT + fi + + - name: Post Membrowse PR comment + if: steps.download.outcome == 'success' && steps.pr_number.outputs.number != '' + uses: membrowse/membrowse-action/comment-action@v1 + with: + json_files: 'reports/*.json' + pr_number: ${{ steps.pr_number.outputs.number }} + env: + GH_TOKEN: ${{ secrets.GITHUB_TOKEN }} diff --git a/.github/workflows/membrowse-onboard.yml b/.github/workflows/membrowse-onboard.yml new file mode 100644 index 000000000..a183297b2 --- /dev/null +++ b/.github/workflows/membrowse-onboard.yml @@ -0,0 +1,58 @@ +name: Onboard to Membrowse + +on: + workflow_dispatch: + inputs: + num_commits: + description: 'Number of commits to process' + required: true + default: '10' + type: string + +jobs: + load-targets: + runs-on: ubuntu-22.04 + outputs: + matrix: ${{ steps.set-matrix.outputs.matrix }} + steps: + - name: Checkout repository + uses: actions/checkout@v5 + + - name: Load target matrix + id: set-matrix + run: echo "matrix=$(jq -c '.' .github/membrowse-targets.json)" >> $GITHUB_OUTPUT + + onboard: + needs: load-targets + runs-on: ubuntu-22.04 + strategy: + fail-fast: false + matrix: + include: ${{ fromJson(needs.load-targets.outputs.matrix) }} + + steps: + - name: Checkout repository + uses: actions/checkout@v5 + with: + fetch-depth: 0 + submodules: recursive + + - name: Install packages + run: ${{ matrix.setup_cmd }} + + - name: Setup ccache + uses: hendrikmuhs/ccache-action@v1.2 + with: + key: ${{ matrix.port }}-${{ matrix.board }} + + - name: Run Membrowse Onboard Action + uses: membrowse/membrowse-action/onboard-action@v1 + with: + target_name: ${{ matrix.target_name }} + num_commits: ${{ github.event.inputs.num_commits }} + build_script: ${{ matrix.build_cmd }} + elf: ${{ matrix.elf }} + ld: ${{ matrix.ld }} + linker_vars: ${{ matrix.linker_vars }} + api_key: ${{ secrets.MEMBROWSE_API_KEY }} + api_url: ${{ vars.MEMBROWSE_API_URL }} diff --git a/.github/workflows/membrowse-report.yml b/.github/workflows/membrowse-report.yml new file mode 100644 index 000000000..aff9fe138 --- /dev/null +++ b/.github/workflows/membrowse-report.yml @@ -0,0 +1,101 @@ +name: Membrowse Memory Report + +on: + workflow_call: + inputs: + code_changed: + description: 'Whether code paths changed (true) or doc-only (false)' + type: boolean + required: true + +permissions: + contents: read + actions: read + +jobs: + load-targets: + runs-on: ubuntu-latest + outputs: + matrix: ${{ steps.set-matrix.outputs.matrix }} + steps: + - name: Checkout repository + uses: actions/checkout@v6 + + - name: Load target matrix + id: set-matrix + run: echo "matrix=$(jq -c '.' .github/membrowse-targets.json)" >> $GITHUB_OUTPUT + + analyze: + needs: [load-targets] + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + include: ${{ fromJson(needs.load-targets.outputs.matrix) }} + + steps: + - name: Checkout repository + uses: actions/checkout@v6 + with: + fetch-depth: 0 + submodules: recursive + + # Download artifacts when code changed (build artifacts available) + - name: Download build artifacts + if: inputs.code_changed + id: download + uses: actions/download-artifact@v5 + with: + pattern: binaries-* + path: cmake-build + merge-multiple: true + continue-on-error: true + + - name: Restore linker scripts + if: inputs.code_changed + run: cp -r cmake-build/hw . 2>/dev/null || true + + - name: Check if ELF exists + id: check-elf + run: | + if [ -f "${{ matrix.elf }}" ]; then + echo "exists=true" >> $GITHUB_OUTPUT + else + echo "exists=false" >> $GITHUB_OUTPUT + fi + + # Run with actual ELF analysis when build artifacts available + - name: Run Membrowse Analysis + if: steps.check-elf.outputs.exists == 'true' + id: membrowse + continue-on-error: true + uses: membrowse/membrowse-action@v1 + with: + target_name: ${{ matrix.target_name }} + elf: ${{ matrix.elf }} + ld: ${{ matrix.ld }} + linker_vars: ${{ matrix.linker_vars }} + api_key: ${{ secrets.MEMBROWSE_API_KEY }} + api_url: ${{ vars.MEMBROWSE_API_URL }} + verbose: INFO + + # Run with identical=true when no ELF (doc-only push) + # Preserves the chain of commits in membrowse tracking + - name: Run Membrowse Identical Report + if: steps.check-elf.outputs.exists == 'false' + id: membrowse-identical + continue-on-error: true + uses: membrowse/membrowse-action@v1 + with: + target_name: ${{ matrix.target_name }} + identical: true + api_key: ${{ secrets.MEMBROWSE_API_KEY }} + api_url: ${{ vars.MEMBROWSE_API_URL }} + verbose: INFO + + - name: Upload report artifact + if: steps.membrowse.outcome == 'success' || steps.membrowse-identical.outcome == 'success' + uses: actions/upload-artifact@v5 + with: + name: membrowse-report-${{ matrix.target_name }} + path: ${{ steps.membrowse.outputs.report_path || steps.membrowse-identical.outputs.report_path }} diff --git a/README.rst b/README.rst index e439a3137..0eb1e84b9 100644 --- a/README.rst +++ b/README.rst @@ -1,7 +1,7 @@ TinyUSB ======= -|Build Status| |CircleCI Status| |Documentation Status| |Static Analysis| |Fuzzing Status| |License| +|Build Status| |CircleCI Status| |Documentation Status| |Static Analysis| |Fuzzing Status| |Membrowse| |License| Sponsors -------- @@ -293,6 +293,8 @@ The following tools are provided freely to support the development of the TinyUS :target: https://github.com/hathach/tinyusb/actions/workflows/static_analysis.yml .. |Fuzzing Status| image:: https://oss-fuzz-build-logs.storage.googleapis.com/badges/tinyusb.svg :target: https://oss-fuzz-build-logs.storage.googleapis.com/index.html#tinyusb +.. |Membrowse| image:: https://membrowse.com/badge.svg + :target: https://membrowse.com/public/hathach/tinyusb .. |License| image:: https://img.shields.io/badge/license-MIT-brightgreen.svg :target: https://opensource.org/licenses/MIT -- cgit v1.3.1 From 7921aae6e2f824e217a5cb3da1337876bfd9d3a9 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Mon, 19 Jan 2026 10:53:48 +0100 Subject: example: update comment on CDC EP size Signed-off-by: Zixun LI --- examples/device/cdc_dual_ports/src/tusb_config.h | 2 ++ examples/device/cdc_msc/src/tusb_config.h | 2 ++ examples/device/cdc_msc_freertos/src/tusb_config.h | 2 ++ examples/device/cdc_uac2/src/tusb_config.h | 2 ++ 4 files changed, 8 insertions(+) diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index 0da4032a7..710c01ee2 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -104,6 +104,8 @@ #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // CDC Endpoint transfer buffer size, more is faster +// Leave it as default size (512 for HS, 64 for FS) unless your host application +// is able to send ZLP (Zero Length Packet) to terminate transfer ! #define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #ifdef __cplusplus diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index fdb2ddf18..3f2f05f20 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -104,6 +104,8 @@ #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // CDC Endpoint transfer buffer size, more is faster +// Leave it as default size (512 for HS, 64 for FS) unless your host application +// is able to send ZLP (Zero Length Packet) to terminate transfer ! #define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // MSC Buffer size of Device Mass storage diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 6b1937a8d..8277b1604 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -111,6 +111,8 @@ #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // CDC Endpoint transfer buffer size, more is faster +// Leave it as default size (512 for HS, 64 for FS) unless your host application +// is able to send ZLP (Zero Length Packet) to terminate transfer ! #define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // MSC Buffer size of Device Mass storage diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index b7ece8b7c..5eb2e8f74 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -160,6 +160,8 @@ extern "C" { #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // CDC Endpoint transfer buffer size, more is faster +// Leave it as default size (512 for HS, 64 for FS) unless your host application +// is able to send ZLP (Zero Length Packet) to terminate transfer ! #define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #ifdef __cplusplus -- cgit v1.3.1 From d89a5812c3b3d1d88911f9c6307f343c9d3756bd Mon Sep 17 00:00:00 2001 From: Mitsumine Suzu <60875431+verylowfreq@users.noreply.github.com> Date: Sat, 24 Jan 2026 17:08:55 +0900 Subject: Fix macro directive for FSDEV of CH32V20x --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 22a9e4af8..a6abc6244 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -833,7 +833,7 @@ void dcd_int_disable(uint8_t rhport) { fsdev_int_disable(rhport); } - #if defined(USB_BCDR_DPPU) || defined(SYSCFG_PMC_USB_PU) + #if defined(USB_BCDR_DPPU) || defined(SYSCFG_PMC_USB_PU) || defined(EXTEN_USBD_PU_EN) void dcd_connect(uint8_t rhport) { fsdev_connect(rhport); } -- cgit v1.3.1 From 697fdca69d7a1df0cc63b0af47ff66459af9367a Mon Sep 17 00:00:00 2001 From: Michael Rogov Papernov Date: Sat, 24 Jan 2026 13:06:56 +0000 Subject: restructure targets file --- .github/membrowse-targets.json | 1156 +++++++++++++------------------ .github/workflows/build.yml | 4 - .github/workflows/build_util.yml | 2 +- .github/workflows/membrowse-comment.yml | 16 +- .github/workflows/membrowse-onboard.yml | 22 +- .github/workflows/membrowse-report.yml | 20 +- 6 files changed, 523 insertions(+), 697 deletions(-) diff --git a/.github/membrowse-targets.json b/.github/membrowse-targets.json index 80dd158a8..5b76f9b55 100644 --- a/.github/membrowse-targets.json +++ b/.github/membrowse-targets.json @@ -1,662 +1,494 @@ -[ - { - "target_name": "at32f402_405-at_start_f402", - "port": "at32f402_405", - "board": "at_start_f402", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f402_405", - "build_cmd": "python3 tools/build.py -s cmake -b at_start_f402", - "elf": "cmake-build/cmake-build-at_start_f402/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/artery/at32f402_405/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F402xC_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "at32f403a_407-at32f403a_weact_blackpill", - "port": "at32f403a_407", - "board": "at32f403a_weact_blackpill", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f403a_407", - "build_cmd": "python3 tools/build.py -s cmake -b at32f403a_weact_blackpill", - "elf": "cmake-build/cmake-build-at32f403a_weact_blackpill/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/artery/at32f403a_407/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F403AxC_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "at32f413-at_start_f413", - "port": "at32f413", - "board": "at_start_f413", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f413", - "build_cmd": "python3 tools/build.py -s cmake -b at_start_f413", - "elf": "cmake-build/cmake-build-at_start_f413/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/artery/at32f413/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413xC_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "at32f415-at_start_f415", - "port": "at32f415", - "board": "at_start_f415", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f415", - "build_cmd": "python3 tools/build.py -s cmake -b at_start_f415", - "elf": "cmake-build/cmake-build-at_start_f415/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/artery/at32f415/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F415xC_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "at32f423-at_start_f423", - "port": "at32f423", - "board": "at_start_f423", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f423", - "build_cmd": "python3 tools/build.py -s cmake -b at_start_f423", - "elf": "cmake-build/cmake-build-at_start_f423/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/artery/at32f423/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F423xC_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "at32f425-at_start_f425", - "port": "at32f425", - "board": "at_start_f425", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f425", - "build_cmd": "python3 tools/build.py -s cmake -b at_start_f425", - "elf": "cmake-build/cmake-build-at_start_f425/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/artery/at32f425/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F425x8_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "at32f435_437-at_start_f435", - "port": "at32f435_437", - "board": "at_start_f435", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py at32f435_437", - "build_cmd": "python3 tools/build.py -s cmake -b at_start_f435", - "elf": "cmake-build/cmake-build-at_start_f435/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/artery/at32f435_437/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F435xM_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "broadcom_32bit-raspberrypi_zero", - "port": "broadcom_32bit", - "board": "raspberrypi_zero", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py broadcom_32bit", - "build_cmd": "python3 tools/build.py -s cmake -b raspberrypi_zero", - "elf": "cmake-build/cmake-build-raspberrypi_zero/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/broadcom/broadcom/link.ld", - "linker_vars": "" - }, - { - "target_name": "broadcom_64bit-raspberrypi_cm4", - "port": "broadcom_64bit", - "board": "raspberrypi_cm4", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.xz && tar -C $HOME/toolchain -xf toolchain.tar.xz && echo \"$HOME/toolchain/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py broadcom_64bit", - "build_cmd": "python3 tools/build.py -s cmake -b raspberrypi_cm4", - "elf": "cmake-build/cmake-build-raspberrypi_cm4/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/broadcom/broadcom/link8.ld", - "linker_vars": "" - }, - { - "target_name": "ch32v10x-ch32v103r_r1_1v0", - "port": "ch32v10x", - "board": "ch32v103r_r1_1v0", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py ch32v10x", - "build_cmd": "python3 tools/build.py -s cmake -b ch32v103r_r1_1v0", - "elf": "cmake-build/cmake-build-ch32v103r_r1_1v0/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/ch32v10x/linker/ch32v10x.ld", - "linker_vars": "__FLASH_SIZE=64K __RAM_SIZE=20K" - }, - { - "target_name": "ch32v20x-ch32v203c_r0_1v0", - "port": "ch32v20x", - "board": "ch32v203c_r0_1v0", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py ch32v20x", - "build_cmd": "python3 tools/build.py -s cmake -b ch32v203c_r0_1v0", - "elf": "cmake-build/cmake-build-ch32v203c_r0_1v0/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/ch32v20x/linker/ch32v20x.ld", - "linker_vars": "__flash_size=64K __ram_size=20K" - }, - { - "target_name": "ch32v30x-ch32v307v_r1_1v0", - "port": "ch32v30x", - "board": "ch32v307v_r1_1v0", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py ch32v30x", - "build_cmd": "python3 tools/build.py -s cmake -b ch32v307v_r1_1v0", - "elf": "cmake-build/cmake-build-ch32v307v_r1_1v0/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/ch32v30x/linker/ch32v30x.ld", - "linker_vars": "__flash_size=128K __ram_size=32K" - }, - { - "target_name": "da1469x-da14695_dk_usb", - "port": "da1469x", - "board": "da14695_dk_usb", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py da1469x", - "build_cmd": "python3 tools/build.py -s cmake -b da14695_dk_usb", - "elf": "cmake-build/cmake-build-da14695_dk_usb/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/da1469x/linker/da1469x.ld", - "linker_vars": "" - }, - { - "target_name": "fomu-fomu", - "port": "fomu", - "board": "fomu", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py fomu", - "build_cmd": "python3 tools/build.py -s cmake -b fomu", - "elf": "cmake-build/cmake-build-fomu/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/fomu/fomu.ld", - "linker_vars": "" - }, - { - "target_name": "gd32vf103-sipeed_longan_nano", - "port": "gd32vf103", - "board": "sipeed_longan_nano", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py gd32vf103", - "build_cmd": "python3 tools/build.py -s cmake -b sipeed_longan_nano", - "elf": "cmake-build/cmake-build-sipeed_longan_nano/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/gd/nuclei-sdk/SoC/gd32vf103/Board/gd32vf103c_longan_nano/Source/GCC/gcc_gd32vf103xb_flashxip.ld", - "linker_vars": "__ROM_BASE=0x08000000 __ROM_SIZE=0x00020000 __RAM_BASE=0x20000000 __RAM_SIZE=0x00008000" - }, - { - "target_name": "hpmicro-hpm6750evk2", - "port": "hpmicro", - "board": "hpm6750evk2", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py hpmicro", - "build_cmd": "python3 tools/build.py -s cmake -b hpm6750evk2", - "elf": "cmake-build/cmake-build-hpm6750evk2/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/hpmicro/hpm_sdk/soc/HPM6700/HPM6750/toolchains/gcc/flash_xip.ld", - "linker_vars": "_flash_size=16M _stack_size=16K _heap_size=16K" - }, - { - "target_name": "imxrt-metro_m7_1011", - "port": "imxrt", - "board": "metro_m7_1011", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py imxrt", - "build_cmd": "python3 tools/build.py -s cmake -b metro_m7_1011", - "elf": "cmake-build/cmake-build-metro_m7_1011/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/nxp/mcux-sdk/devices/MIMXRT1011/gcc/MIMXRT1011xxxxx_flexspi_nor.ld", - "linker_vars": "" - }, - { - "target_name": "kinetis_k-frdm_k64f", - "port": "kinetis_k", - "board": "frdm_k64f", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py kinetis_k kinetis_kl", - "build_cmd": "python3 tools/build.py -s cmake -b frdm_k64f", - "elf": "cmake-build/cmake-build-frdm_k64f/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/nxp/mcux-sdk/devices/MK64F12/gcc/MK64FN1M0xxx12_flash.ld", - "linker_vars": "" - }, - { - "target_name": "kinetis_k32l2-frdm_k32l2a4s", - "port": "kinetis_k32l2", - "board": "frdm_k32l2a4s", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py kinetis_k32l2", - "build_cmd": "python3 tools/build.py -s cmake -b frdm_k32l2a4s", - "elf": "cmake-build/cmake-build-frdm_k32l2a4s/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/nxp/mcux-sdk/devices/K32L2A41A/gcc/K32L2A41xxxxA_flash.ld", - "linker_vars": "" - }, - { - "target_name": "kinetis_kl-frdm_kl25z", - "port": "kinetis_kl", - "board": "frdm_kl25z", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py kinetis_kl", - "build_cmd": "python3 tools/build.py -s cmake -b frdm_kl25z", - "elf": "cmake-build/cmake-build-frdm_kl25z/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/kinetis_kl/gcc/MKL25Z128xxx4_flash.ld", - "linker_vars": "" - }, - { - "target_name": "lpc11-lpcxpresso11u37", - "port": "lpc11", - "board": "lpcxpresso11u37", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc11", - "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso11u37", - "elf": "cmake-build/cmake-build-lpcxpresso11u37/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/lpc11/boards/lpcxpresso11u37/lpc11u37.ld", - "linker_vars": "" - }, - { - "target_name": "lpc13-lpcxpresso1347", - "port": "lpc13", - "board": "lpcxpresso1347", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc13", - "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso1347", - "elf": "cmake-build/cmake-build-lpcxpresso1347/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/lpc13/boards/lpcxpresso1347/lpc1347.ld", - "linker_vars": "" - }, - { - "target_name": "lpc15-lpcxpresso1549", - "port": "lpc15", - "board": "lpcxpresso1549", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc15", - "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso1549", - "elf": "cmake-build/cmake-build-lpcxpresso1549/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld", - "linker_vars": "" - }, - { - "target_name": "lpc17-lpcxpresso1769", - "port": "lpc17", - "board": "lpcxpresso1769", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc17", - "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso1769", - "elf": "cmake-build/cmake-build-lpcxpresso1769/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld", - "linker_vars": "" - }, - { - "target_name": "lpc18-lpcxpresso18s37", - "port": "lpc18", - "board": "lpcxpresso18s37", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc18", - "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso18s37", - "elf": "cmake-build/cmake-build-lpcxpresso18s37/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld", - "linker_vars": "" - }, - { - "target_name": "lpc40-ea4088_quickstart", - "port": "lpc40", - "board": "ea4088_quickstart", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc40", - "build_cmd": "python3 tools/build.py -s cmake -b ea4088_quickstart", - "elf": "cmake-build/cmake-build-ea4088_quickstart/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/lpc40/boards/ea4088_quickstart/lpc4088.ld", - "linker_vars": "" - }, - { - "target_name": "lpc43-ea4357", - "port": "lpc43", - "board": "ea4357", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc43", - "build_cmd": "python3 tools/build.py -s cmake -b ea4357", - "elf": "cmake-build/cmake-build-ea4357/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/lpc43/boards/ea4357/lpc4357.ld", - "linker_vars": "" - }, - { - "target_name": "lpc51-lpcxpresso51u68", - "port": "lpc51", - "board": "lpcxpresso51u68", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc51", - "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso51u68", - "elf": "cmake-build/cmake-build-lpcxpresso51u68/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/nxp/mcux-sdk/devices/LPC51U68/gcc/LPC51U68_flash.ld", - "linker_vars": "" - }, - { - "target_name": "lpc54-lpcxpresso54114", - "port": "lpc54", - "board": "lpcxpresso54114", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc54", - "build_cmd": "python3 tools/build.py -s cmake -b lpcxpresso54114", - "elf": "cmake-build/cmake-build-lpcxpresso54114/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/nxp/mcux-sdk/devices/LPC54114/gcc/LPC54114J256_cm4_flash.ld", - "linker_vars": "" - }, - { - "target_name": "lpc55-double_m33_express", - "port": "lpc55", - "board": "double_m33_express", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py lpc55", - "build_cmd": "python3 tools/build.py -s cmake -b double_m33_express", - "elf": "cmake-build/cmake-build-double_m33_express/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld", - "linker_vars": "" - }, - { - "target_name": "maxim-apard32690", - "port": "maxim", - "board": "apard32690", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py maxim", - "build_cmd": "python3 tools/build.py -s cmake -b apard32690", - "elf": "cmake-build/cmake-build-apard32690/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/maxim/linker/max32690.ld", - "linker_vars": "" - }, - { - "target_name": "mcx-frdm_mcxa153", - "port": "mcx", - "board": "frdm_mcxa153", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py mcx", - "build_cmd": "python3 tools/build.py -s cmake -b frdm_mcxa153", - "elf": "cmake-build/cmake-build-frdm_mcxa153/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/nxp/mcux-sdk/devices/MCXA153/gcc/MCXA153_flash.ld", - "linker_vars": "" - }, - { - "target_name": "mm32-mm32f327x_mb39", - "port": "mm32", - "board": "mm32f327x_mb39", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py mm32", - "build_cmd": "python3 tools/build.py -s cmake -b mm32f327x_mb39", - "elf": "cmake-build/cmake-build-mm32f327x_mb39/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld", - "linker_vars": "" - }, - { - "target_name": "msp430-msp_exp430f5529lp", - "port": "msp430", - "board": "msp_exp430f5529lp", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.bz2 && tar -C $HOME/toolchain -xf toolchain.tar.bz2 && echo \"$HOME/toolchain/msp430-gcc-9.2.0.50_linux64/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py msp430", - "build_cmd": "python3 tools/build.py -s cmake -b msp_exp430f5529lp", - "elf": "cmake-build/cmake-build-msp_exp430f5529lp/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/ti/msp430/msp430-gcc-support-files/include/msp430f5529.ld", - "linker_vars": "" - }, - { - "target_name": "msp432e4-msp_exp432e401y", - "port": "msp432e4", - "board": "msp_exp432e401y", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py msp432e4", - "build_cmd": "python3 tools/build.py -s cmake -b msp_exp432e401y", - "elf": "cmake-build/cmake-build-msp_exp432e401y/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/ti/msp432e4/Source/msp432e411y.ld", - "linker_vars": "" - }, - { - "target_name": "nrf-adafruit_clue", - "port": "nrf", - "board": "adafruit_clue", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nrf", - "build_cmd": "python3 tools/build.py -s cmake -b adafruit_clue", - "elf": "cmake-build/cmake-build-adafruit_clue/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/nrf/linker/nrf52840_xxaa.ld", - "linker_vars": "" - }, - { - "target_name": "nuc100_120-nutiny_sdk_nuc120", - "port": "nuc100_120", - "board": "nutiny_sdk_nuc120", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nuc100_120", - "build_cmd": "python3 tools/build.py -s cmake -b nutiny_sdk_nuc120", - "elf": "cmake-build/cmake-build-nutiny_sdk_nuc120/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/nuc120_flash.ld", - "linker_vars": "" - }, - { - "target_name": "nuc121_125-nutiny_sdk_nuc121", - "port": "nuc121_125", - "board": "nutiny_sdk_nuc121", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nuc121_125", - "build_cmd": "python3 tools/build.py -s cmake -b nutiny_sdk_nuc121", - "elf": "cmake-build/cmake-build-nutiny_sdk_nuc121/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/nuc121_flash.ld", - "linker_vars": "" - }, - { - "target_name": "nuc126-nutiny_nuc126v", - "port": "nuc126", - "board": "nutiny_nuc126v", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nuc126", - "build_cmd": "python3 tools/build.py -s cmake -b nutiny_nuc126v", - "elf": "cmake-build/cmake-build-nutiny_nuc126v/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/nuc126/boards/nutiny_nuc126v/nuc126_flash.ld", - "linker_vars": "" - }, - { - "target_name": "nuc505-nutiny_sdk_nuc505", - "port": "nuc505", - "board": "nutiny_sdk_nuc505", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py nuc505", - "build_cmd": "python3 tools/build.py -s cmake -b nutiny_sdk_nuc505", - "elf": "cmake-build/cmake-build-nutiny_sdk_nuc505/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/nuc505/boards/nutiny_sdk_nuc505/nuc505_flashtoram.ld", - "linker_vars": "" - }, - { - "target_name": "ra-portenta_c33", - "port": "ra", - "board": "portenta_c33", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py ra", - "build_cmd": "python3 tools/build.py -s cmake -b portenta_c33", - "elf": "cmake-build/cmake-build-portenta_c33/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld hw/bsp/ra/boards/portenta_c33/script/fsp.ld", - "linker_vars": "" - }, - { - "target_name": "rw61x-frdm_rw612", - "port": "rw61x", - "board": "frdm_rw612", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py rw61x", - "build_cmd": "python3 tools/build.py -s cmake -b frdm_rw612", - "elf": "cmake-build/cmake-build-frdm_rw612/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/nxp/mcux-sdk/devices/RW612/gcc/RW612_flash.ld", - "linker_vars": "" - }, - { - "target_name": "samd11-cynthion_d11", - "port": "samd11", - "board": "cynthion_d11", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py samd11", - "build_cmd": "python3 tools/build.py -s cmake -b cynthion_d11", - "elf": "cmake-build/cmake-build-cynthion_d11/device/hid_composite/hid_composite.elf", - "ld": "hw/bsp/samd11/boards/cynthion_d11/cynthion_d11.ld", - "linker_vars": "BOOTLOADER_SIZE=0x800" - }, - { - "target_name": "samd5x_e5x-d5035_01", - "port": "samd5x_e5x", - "board": "d5035_01", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py samd5x_e5x", - "build_cmd": "python3 tools/build.py -s cmake -b d5035_01", - "elf": "cmake-build/cmake-build-d5035_01/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/samd5x_e5x/boards/d5035_01/same51j19a_flash.ld", - "linker_vars": "" - }, - { - "target_name": "samg-samg55_xplained", - "port": "samg", - "board": "samg55_xplained", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py samg", - "build_cmd": "python3 tools/build.py -s cmake -b samg55_xplained", - "elf": "cmake-build/cmake-build-samg55_xplained/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/samg/boards/samg55_xplained/samg55j19_flash.ld", - "linker_vars": "" - }, - { - "target_name": "stm32c0-stm32c071nucleo", - "port": "stm32c0", - "board": "stm32c071nucleo", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32c0", - "build_cmd": "python3 tools/build.py -s cmake -b stm32c071nucleo", - "elf": "cmake-build/cmake-build-stm32c071nucleo/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32f0-stm32f070rbnucleo", - "port": "stm32f0", - "board": "stm32f070rbnucleo", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f0", - "build_cmd": "python3 tools/build.py -s cmake -b stm32f070rbnucleo", - "elf": "cmake-build/cmake-build-stm32f070rbnucleo/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld", - "linker_vars": "" - }, - { - "target_name": "stm32f1-stm32f103_bluepill", - "port": "stm32f1", - "board": "stm32f103_bluepill", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f1", - "build_cmd": "python3 tools/build.py -s cmake -b stm32f103_bluepill", - "elf": "cmake-build/cmake-build-stm32f103_bluepill/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32f2-stm32f207nucleo", - "port": "stm32f2", - "board": "stm32f207nucleo", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f2", - "build_cmd": "python3 tools/build.py -s cmake -b stm32f207nucleo", - "elf": "cmake-build/cmake-build-stm32f207nucleo/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32f2/boards/stm32f207nucleo/STM32F207ZGTx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32f3-stm32f303disco", - "port": "stm32f3", - "board": "stm32f303disco", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f3", - "build_cmd": "python3 tools/build.py -s cmake -b stm32f303disco", - "elf": "cmake-build/cmake-build-stm32f303disco/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32f3/boards/stm32f303disco/STM32F303VCTx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32f4-feather_stm32f405", - "port": "stm32f4", - "board": "feather_stm32f405", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f4", - "build_cmd": "python3 tools/build.py -s cmake -b feather_stm32f405", - "elf": "cmake-build/cmake-build-feather_stm32f405/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32f7-stlinkv3mini", - "port": "stm32f7", - "board": "stlinkv3mini", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32f7", - "build_cmd": "python3 tools/build.py -s cmake -b stlinkv3mini", - "elf": "cmake-build/cmake-build-stlinkv3mini/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32g0-stm32g0b1nucleo", - "port": "stm32g0", - "board": "stm32g0b1nucleo", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32g0", - "build_cmd": "python3 tools/build.py -s cmake -b stm32g0b1nucleo", - "elf": "cmake-build/cmake-build-stm32g0b1nucleo/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32g0/boards/stm32g0b1nucleo/STM32G0B1RETx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32g4-b_g474e_dpow1", - "port": "stm32g4", - "board": "b_g474e_dpow1", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32g4", - "build_cmd": "python3 tools/build.py -s cmake -b b_g474e_dpow1", - "elf": "cmake-build/cmake-build-b_g474e_dpow1/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32g4/boards/b_g474e_dpow1/STM32G474RETx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32h5-stm32h503nucleo", - "port": "stm32h5", - "board": "stm32h503nucleo", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32h5", - "build_cmd": "python3 tools/build.py -s cmake -b stm32h503nucleo", - "elf": "cmake-build/cmake-build-stm32h503nucleo/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32h7-daisyseed", - "port": "stm32h7", - "board": "daisyseed", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32h7", - "build_cmd": "python3 tools/build.py -s cmake -b daisyseed", - "elf": "cmake-build/cmake-build-daisyseed/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_ram.ld", - "linker_vars": "" - }, - { - "target_name": "stm32h7rs-stm32h7s3nucleo", - "port": "stm32h7rs", - "board": "stm32h7s3nucleo", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32h7rs", - "build_cmd": "python3 tools/build.py -s cmake -b stm32h7s3nucleo", - "elf": "cmake-build/cmake-build-stm32h7s3nucleo/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32h7rs/linker/stm32h7s3xx_flash.ld", - "linker_vars": "__FLASH_BEGIN=0x08000000 __FLASH_SIZE=0x00010000 __RAM_BEGIN=0x24000000 __RAM_SIZE=0x4FC00 __RAM_NONCACHEABLEBUFFER_SIZE=0x400" - }, - { - "target_name": "stm32l0-stm32l052dap52", - "port": "stm32l0", - "board": "stm32l052dap52", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32l0", - "build_cmd": "python3 tools/build.py -s cmake -b stm32l052dap52", - "elf": "cmake-build/cmake-build-stm32l052dap52/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32l4-stm32l412nucleo", - "port": "stm32l4", - "board": "stm32l412nucleo", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32l4", - "build_cmd": "python3 tools/build.py -s cmake -b stm32l412nucleo", - "elf": "cmake-build/cmake-build-stm32l412nucleo/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32n6-stm32n6570dk", - "port": "stm32n6", - "board": "stm32n6570dk", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32n6", - "build_cmd": "python3 tools/build.py -s cmake -b stm32n6570dk", - "elf": "cmake-build/cmake-build-stm32n6570dk/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32n6/boards/stm32n6570dk/STM32N657XX_AXISRAM2_fsbl.ld", - "linker_vars": "" - }, - { - "target_name": "stm32u0-stm32u083cdk", - "port": "stm32u0", - "board": "stm32u083cdk", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32u0", - "build_cmd": "python3 tools/build.py -s cmake -b stm32u083cdk", - "elf": "cmake-build/cmake-build-stm32u083cdk/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32u0/boards/stm32u083cdk/STM32U083MCTx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32u5-b_u585i_iot2a", - "port": "stm32u5", - "board": "b_u585i_iot2a", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32u5", - "build_cmd": "python3 tools/build.py -s cmake -b b_u585i_iot2a", - "elf": "cmake-build/cmake-build-b_u585i_iot2a/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32u5/linker/STM32U5A9xx_FLASH.ld", - "linker_vars": "" - }, - { - "target_name": "stm32wb-stm32wb55nucleo", - "port": "stm32wb", - "board": "stm32wb55nucleo", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32wb", - "build_cmd": "python3 tools/build.py -s cmake -b stm32wb55nucleo", - "elf": "cmake-build/cmake-build-stm32wb55nucleo/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld", - "linker_vars": "" - }, - { - "target_name": "stm32wba-stm32wba_nucleo", - "port": "stm32wba", - "board": "stm32wba_nucleo", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py stm32wba", - "build_cmd": "python3 tools/build.py -s cmake -b stm32wba_nucleo", - "elf": "cmake-build/cmake-build-stm32wba_nucleo/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/stm32wba/linker/STM32WBA65xx_FLASH_ns.ld", - "linker_vars": "" - }, - { - "target_name": "tm4c-ek_tm4c123gxl", - "port": "tm4c", - "board": "ek_tm4c123gxl", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py tm4c", - "build_cmd": "python3 tools/build.py -s cmake -b ek_tm4c123gxl", - "elf": "cmake-build/cmake-build-ek_tm4c123gxl/device/cdc_msc/cdc_msc.elf", - "ld": "hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld", - "linker_vars": "" - }, - { - "target_name": "xmc4000-xmc4500_relax", - "port": "xmc4000", - "board": "xmc4500_relax", - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH && python3 tools/get_deps.py xmc4000", - "build_cmd": "python3 tools/build.py -s cmake -b xmc4500_relax", - "elf": "cmake-build/cmake-build-xmc4500_relax/device/cdc_msc/cdc_msc.elf", - "ld": "hw/mcu/infineon/mtb-xmclib-cat3/CMSIS/Infineon/COMPONENT_XMC4500/Source/TOOLCHAIN_GCC_ARM/XMC4500x1024.ld", - "linker_vars": "" - } -] +{ + "templates": { + "build_cmd": "python3 tools/build.py -s cmake -b ${board}", + "elf": "cmake-build/cmake-build-${board}/device/${example}/${example}.elf", + "setup_cmd": "${toolchain.setup_cmd} && python3 tools/get_deps.py ${get_deps}", + "get_deps": "${port}" + }, + "toolchains": { + "arm-none-eabi-gcc-14": { + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH" + }, + "aarch64-none-elf-gcc-10": { + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.xz && tar -C $HOME/toolchain -xf toolchain.tar.xz && echo \"$HOME/toolchain/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf/bin\" >> $GITHUB_PATH" + }, + "riscv-none-elf-gcc-13": { + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH" + }, + "msp430-gcc-9": { + "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.bz2 && tar -C $HOME/toolchain -xf toolchain.tar.bz2 && echo \"$HOME/toolchain/msp430-gcc-9.2.0.50_linux64/bin\" >> $GITHUB_PATH" + } + }, + "targets": [ + { + "port": "at32f402_405", + "board": "at_start_f402", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/artery/at32f402_405/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F402xC_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "at32f403a_407", + "board": "at32f403a_weact_blackpill", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/artery/at32f403a_407/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F403AxC_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "at32f413", + "board": "at_start_f413", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/artery/at32f413/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413xC_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "at32f415", + "board": "at_start_f415", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/artery/at32f415/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F415xC_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "at32f423", + "board": "at_start_f423", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/artery/at32f423/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F423xC_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "at32f425", + "board": "at_start_f425", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/artery/at32f425/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F425x8_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "at32f435_437", + "board": "at_start_f435", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/artery/at32f435_437/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F435xM_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "broadcom_32bit", + "board": "raspberrypi_zero", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/broadcom/broadcom/link.ld", + "example": "cdc_msc" + }, + { + "port": "broadcom_64bit", + "board": "raspberrypi_cm4", + "toolchain": "aarch64-none-elf-gcc-10", + "ld": "hw/mcu/broadcom/broadcom/link8.ld", + "example": "cdc_msc" + }, + { + "port": "ch32v10x", + "board": "ch32v103r_r1_1v0", + "toolchain": "riscv-none-elf-gcc-13", + "ld": "hw/bsp/ch32v10x/linker/ch32v10x.ld", + "linker_vars": "__FLASH_SIZE=64K __RAM_SIZE=20K", + "example": "cdc_msc" + }, + { + "port": "ch32v20x", + "board": "ch32v203c_r0_1v0", + "toolchain": "riscv-none-elf-gcc-13", + "ld": "hw/bsp/ch32v20x/linker/ch32v20x.ld", + "linker_vars": "__flash_size=64K __ram_size=20K", + "example": "cdc_msc" + }, + { + "port": "ch32v30x", + "board": "ch32v307v_r1_1v0", + "toolchain": "riscv-none-elf-gcc-13", + "ld": "hw/bsp/ch32v30x/linker/ch32v30x.ld", + "linker_vars": "__flash_size=128K __ram_size=32K", + "example": "cdc_msc" + }, + { + "port": "da1469x", + "board": "da14695_dk_usb", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/da1469x/linker/da1469x.ld", + "example": "cdc_msc" + }, + { + "port": "fomu", + "board": "fomu", + "toolchain": "riscv-none-elf-gcc-13", + "ld": "hw/bsp/fomu/fomu.ld", + "example": "cdc_msc" + }, + { + "port": "gd32vf103", + "board": "sipeed_longan_nano", + "toolchain": "riscv-none-elf-gcc-13", + "ld": "hw/mcu/gd/nuclei-sdk/SoC/gd32vf103/Board/gd32vf103c_longan_nano/Source/GCC/gcc_gd32vf103xb_flashxip.ld", + "linker_vars": "__ROM_BASE=0x08000000 __ROM_SIZE=0x00020000 __RAM_BASE=0x20000000 __RAM_SIZE=0x00008000", + "example": "cdc_msc" + }, + { + "port": "hpmicro", + "board": "hpm6750evk2", + "toolchain": "riscv-none-elf-gcc-13", + "ld": "hw/mcu/hpmicro/hpm_sdk/soc/HPM6700/HPM6750/toolchains/gcc/flash_xip.ld", + "linker_vars": "_flash_size=16M _stack_size=16K _heap_size=16K", + "example": "cdc_msc" + }, + { + "port": "imxrt", + "board": "metro_m7_1011", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/nxp/mcux-sdk/devices/MIMXRT1011/gcc/MIMXRT1011xxxxx_flexspi_nor.ld", + "example": "cdc_msc" + }, + { + "port": "kinetis_k", + "board": "frdm_k64f", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/nxp/mcux-sdk/devices/MK64F12/gcc/MK64FN1M0xxx12_flash.ld", + "get_deps": "kinetis_k kinetis_kl", + "example": "cdc_msc" + }, + { + "port": "kinetis_k32l2", + "board": "frdm_k32l2a4s", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/nxp/mcux-sdk/devices/K32L2A41A/gcc/K32L2A41xxxxA_flash.ld", + "example": "cdc_msc" + }, + { + "port": "kinetis_kl", + "board": "frdm_kl25z", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/kinetis_kl/gcc/MKL25Z128xxx4_flash.ld", + "example": "cdc_msc" + }, + { + "port": "lpc11", + "board": "lpcxpresso11u37", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/lpc11/boards/lpcxpresso11u37/lpc11u37.ld", + "example": "cdc_msc" + }, + { + "port": "lpc13", + "board": "lpcxpresso1347", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/lpc13/boards/lpcxpresso1347/lpc1347.ld", + "example": "cdc_msc" + }, + { + "port": "lpc15", + "board": "lpcxpresso1549", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld", + "example": "cdc_msc" + }, + { + "port": "lpc17", + "board": "lpcxpresso1769", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld", + "example": "cdc_msc" + }, + { + "port": "lpc18", + "board": "lpcxpresso18s37", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld", + "example": "cdc_msc" + }, + { + "port": "lpc40", + "board": "ea4088_quickstart", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/lpc40/boards/ea4088_quickstart/lpc4088.ld", + "example": "cdc_msc" + }, + { + "port": "lpc43", + "board": "ea4357", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/lpc43/boards/ea4357/lpc4357.ld", + "example": "cdc_msc" + }, + { + "port": "lpc51", + "board": "lpcxpresso51u68", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/nxp/mcux-sdk/devices/LPC51U68/gcc/LPC51U68_flash.ld", + "example": "cdc_msc" + }, + { + "port": "lpc54", + "board": "lpcxpresso54114", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/nxp/mcux-sdk/devices/LPC54114/gcc/LPC54114J256_cm4_flash.ld", + "example": "cdc_msc" + }, + { + "port": "lpc55", + "board": "double_m33_express", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld", + "example": "cdc_msc" + }, + { + "port": "maxim", + "board": "apard32690", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/maxim/linker/max32690.ld", + "example": "cdc_msc" + }, + { + "port": "mcx", + "board": "frdm_mcxa153", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/nxp/mcux-sdk/devices/MCXA153/gcc/MCXA153_flash.ld", + "example": "cdc_msc" + }, + { + "port": "mm32", + "board": "mm32f327x_mb39", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld", + "example": "cdc_msc" + }, + { + "port": "msp430", + "board": "msp_exp430f5529lp", + "toolchain": "msp430-gcc-9", + "ld": "hw/mcu/ti/msp430/msp430-gcc-support-files/include/msp430f5529.ld", + "example": "cdc_msc" + }, + { + "port": "msp432e4", + "board": "msp_exp432e401y", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/ti/msp432e4/Source/msp432e411y.ld", + "example": "cdc_msc" + }, + { + "port": "nrf", + "board": "adafruit_clue", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/nrf/linker/nrf52840_xxaa.ld", + "example": "cdc_msc" + }, + { + "port": "nuc100_120", + "board": "nutiny_sdk_nuc120", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/nuc120_flash.ld", + "example": "cdc_msc" + }, + { + "port": "nuc121_125", + "board": "nutiny_sdk_nuc121", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/nuc121_flash.ld", + "example": "cdc_msc" + }, + { + "port": "nuc126", + "board": "nutiny_nuc126v", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/nuc126/boards/nutiny_nuc126v/nuc126_flash.ld", + "example": "cdc_msc" + }, + { + "port": "nuc505", + "board": "nutiny_sdk_nuc505", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/nuc505/boards/nutiny_sdk_nuc505/nuc505_flashtoram.ld", + "example": "cdc_msc" + }, + { + "port": "ra", + "board": "portenta_c33", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld hw/bsp/ra/boards/portenta_c33/script/fsp.ld", + "example": "cdc_msc" + }, + { + "port": "rw61x", + "board": "frdm_rw612", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/nxp/mcux-sdk/devices/RW612/gcc/RW612_flash.ld", + "example": "cdc_msc" + }, + { + "port": "samd11", + "board": "cynthion_d11", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/samd11/boards/cynthion_d11/cynthion_d11.ld", + "linker_vars": "BOOTLOADER_SIZE=0x800", + "example": "cdc_dual_ports" + }, + { + "port": "samd5x_e5x", + "board": "d5035_01", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/samd5x_e5x/boards/d5035_01/same51j19a_flash.ld", + "example": "cdc_msc" + }, + { + "port": "samg", + "board": "samg55_xplained", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/samg/boards/samg55_xplained/samg55j19_flash.ld", + "example": "cdc_msc" + }, + { + "port": "stm32c0", + "board": "stm32c071nucleo", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32f0", + "board": "stm32f070rbnucleo", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld", + "example": "cdc_msc" + }, + { + "port": "stm32f1", + "board": "stm32f103_bluepill", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32f2", + "board": "stm32f207nucleo", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32f2/boards/stm32f207nucleo/STM32F207ZGTx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32f3", + "board": "stm32f303disco", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32f3/boards/stm32f303disco/STM32F303VCTx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32f4", + "board": "feather_stm32f405", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32f7", + "board": "stlinkv3mini", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32g0", + "board": "stm32g0b1nucleo", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32g0/boards/stm32g0b1nucleo/STM32G0B1RETx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32g4", + "board": "b_g474e_dpow1", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32g4/boards/b_g474e_dpow1/STM32G474RETx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32h5", + "board": "stm32h503nucleo", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32h7", + "board": "daisyseed", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_ram.ld", + "example": "cdc_msc" + }, + { + "port": "stm32h7rs", + "board": "stm32h7s3nucleo", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32h7rs/linker/stm32h7s3xx_flash.ld", + "linker_vars": "__FLASH_BEGIN=0x08000000 __FLASH_SIZE=0x00010000 __RAM_BEGIN=0x24000000 __RAM_SIZE=0x4FC00 __RAM_NONCACHEABLEBUFFER_SIZE=0x400", + "example": "cdc_msc" + }, + { + "port": "stm32l0", + "board": "stm32l052dap52", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32l4", + "board": "stm32l412nucleo", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32n6", + "board": "stm32n6570dk", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32n6/boards/stm32n6570dk/STM32N657XX_AXISRAM2_fsbl.ld", + "example": "cdc_msc" + }, + { + "port": "stm32u0", + "board": "stm32u083cdk", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32u0/boards/stm32u083cdk/STM32U083MCTx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32u5", + "board": "b_u585i_iot2a", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32u5/linker/STM32U5A9xx_FLASH.ld", + "example": "cdc_msc" + }, + { + "port": "stm32wb", + "board": "stm32wb55nucleo", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld", + "example": "cdc_msc" + }, + { + "port": "stm32wba", + "board": "stm32wba_nucleo", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/stm32wba/linker/STM32WBA65xx_FLASH_ns.ld", + "example": "cdc_msc" + }, + { + "port": "tm4c", + "board": "ek_tm4c123gxl", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld", + "example": "cdc_msc" + }, + { + "port": "xmc4000", + "board": "xmc4500_relax", + "toolchain": "arm-none-eabi-gcc-14", + "ld": "hw/mcu/infineon/mtb-xmclib-cat3/CMSIS/Infineon/COMPONENT_XMC4500/Source/TOOLCHAIN_GCC_ARM/XMC4500x1024.ld", + "example": "cdc_msc" + } + ] +} diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index dc5b1975e..e0c1d0a14 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -386,10 +386,6 @@ jobs: merge-multiple: true continue-on-error: true - - name: Save PR number - if: steps.download.outcome == 'success' - run: echo ${{ github.event.number }} > reports/pr_number.txt - - name: Upload Membrowse Comment Artifact if: steps.download.outcome == 'success' uses: actions/upload-artifact@v5 diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index e0fef7ce4..e62c10ca1 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -78,7 +78,7 @@ jobs: run: | for dir in cmake-build/cmake-build-*; do board=$(basename "$dir" | sed 's/cmake-build-//') - ld_path=$(jq -r --arg b "$board" '.[] | select(.board == $b) | .ld // empty' .github/membrowse-targets.json) + ld_path=$(jq -r --arg b "$board" '.targets[] | select(.board == $b) | .ld // empty' .github/membrowse-targets.json) if [ -n "$ld_path" ] && [ -f "$ld_path" ]; then mkdir -p "cmake-build/$(dirname "$ld_path")" cp "$ld_path" "cmake-build/$ld_path" diff --git a/.github/workflows/membrowse-comment.yml b/.github/workflows/membrowse-comment.yml index a3db37360..a99c9db51 100644 --- a/.github/workflows/membrowse-comment.yml +++ b/.github/workflows/membrowse-comment.yml @@ -11,11 +11,14 @@ jobs: runs-on: ubuntu-latest if: > github.event.workflow_run.event == 'pull_request' && - github.event.workflow_run.conclusion == 'success' + github.event.workflow_run.conclusion != 'cancelled' permissions: actions: read pull-requests: write steps: + - name: Checkout repository + uses: actions/checkout@v6 + - name: Download Artifacts id: download uses: actions/download-artifact@v5 @@ -26,19 +29,10 @@ jobs: path: reports continue-on-error: true - - name: Read PR Number - if: steps.download.outcome == 'success' - id: pr_number - run: | - if [ -f reports/pr_number.txt ]; then - echo "number=$(cat reports/pr_number.txt)" >> $GITHUB_OUTPUT - fi - - name: Post Membrowse PR comment - if: steps.download.outcome == 'success' && steps.pr_number.outputs.number != '' + if: steps.download.outcome == 'success' uses: membrowse/membrowse-action/comment-action@v1 with: json_files: 'reports/*.json' - pr_number: ${{ steps.pr_number.outputs.number }} env: GH_TOKEN: ${{ secrets.GITHUB_TOKEN }} diff --git a/.github/workflows/membrowse-onboard.yml b/.github/workflows/membrowse-onboard.yml index a183297b2..aa7204ffa 100644 --- a/.github/workflows/membrowse-onboard.yml +++ b/.github/workflows/membrowse-onboard.yml @@ -13,14 +13,17 @@ jobs: load-targets: runs-on: ubuntu-22.04 outputs: - matrix: ${{ steps.set-matrix.outputs.matrix }} + targets: ${{ steps.load.outputs.targets }} + toolchains: ${{ steps.load.outputs.toolchains }} steps: - name: Checkout repository uses: actions/checkout@v5 - name: Load target matrix - id: set-matrix - run: echo "matrix=$(jq -c '.' .github/membrowse-targets.json)" >> $GITHUB_OUTPUT + id: load + run: | + echo "targets=$(jq -c '.targets' .github/membrowse-targets.json)" >> $GITHUB_OUTPUT + echo "toolchains=$(jq -c '.toolchains' .github/membrowse-targets.json)" >> $GITHUB_OUTPUT onboard: needs: load-targets @@ -28,7 +31,7 @@ jobs: strategy: fail-fast: false matrix: - include: ${{ fromJson(needs.load-targets.outputs.matrix) }} + include: ${{ fromJson(needs.load-targets.outputs.targets) }} steps: - name: Checkout repository @@ -38,7 +41,8 @@ jobs: submodules: recursive - name: Install packages - run: ${{ matrix.setup_cmd }} + run: | + ${{ fromJson(needs.load-targets.outputs.toolchains)[matrix.toolchain].setup_cmd }} && python3 tools/get_deps.py ${{ matrix.get_deps || matrix.port }} - name: Setup ccache uses: hendrikmuhs/ccache-action@v1.2 @@ -48,11 +52,11 @@ jobs: - name: Run Membrowse Onboard Action uses: membrowse/membrowse-action/onboard-action@v1 with: - target_name: ${{ matrix.target_name }} + target_name: ${{ matrix.port }}-${{ matrix.board }}-${{ matrix.example }} num_commits: ${{ github.event.inputs.num_commits }} - build_script: ${{ matrix.build_cmd }} - elf: ${{ matrix.elf }} + build_script: python3 tools/build.py -s cmake -b ${{ matrix.board }} + elf: cmake-build/cmake-build-${{ matrix.board }}/device/${{ matrix.example }}/${{ matrix.example }}.elf ld: ${{ matrix.ld }} - linker_vars: ${{ matrix.linker_vars }} + linker_vars: ${{ matrix.linker_vars || '' }} api_key: ${{ secrets.MEMBROWSE_API_KEY }} api_url: ${{ vars.MEMBROWSE_API_URL }} diff --git a/.github/workflows/membrowse-report.yml b/.github/workflows/membrowse-report.yml index aff9fe138..0667418e6 100644 --- a/.github/workflows/membrowse-report.yml +++ b/.github/workflows/membrowse-report.yml @@ -16,14 +16,14 @@ jobs: load-targets: runs-on: ubuntu-latest outputs: - matrix: ${{ steps.set-matrix.outputs.matrix }} + targets: ${{ steps.load.outputs.targets }} steps: - name: Checkout repository uses: actions/checkout@v6 - name: Load target matrix - id: set-matrix - run: echo "matrix=$(jq -c '.' .github/membrowse-targets.json)" >> $GITHUB_OUTPUT + id: load + run: echo "targets=$(jq -c '.targets' .github/membrowse-targets.json)" >> $GITHUB_OUTPUT analyze: needs: [load-targets] @@ -31,7 +31,7 @@ jobs: strategy: fail-fast: false matrix: - include: ${{ fromJson(needs.load-targets.outputs.matrix) }} + include: ${{ fromJson(needs.load-targets.outputs.targets) }} steps: - name: Checkout repository @@ -58,7 +58,7 @@ jobs: - name: Check if ELF exists id: check-elf run: | - if [ -f "${{ matrix.elf }}" ]; then + if [ -f "cmake-build/cmake-build-${{ matrix.board }}/device/${{ matrix.example }}/${{ matrix.example }}.elf" ]; then echo "exists=true" >> $GITHUB_OUTPUT else echo "exists=false" >> $GITHUB_OUTPUT @@ -71,10 +71,10 @@ jobs: continue-on-error: true uses: membrowse/membrowse-action@v1 with: - target_name: ${{ matrix.target_name }} - elf: ${{ matrix.elf }} + target_name: ${{ matrix.port }}-${{ matrix.board }}-${{ matrix.example }} + elf: cmake-build/cmake-build-${{ matrix.board }}/device/${{ matrix.example }}/${{ matrix.example }}.elf ld: ${{ matrix.ld }} - linker_vars: ${{ matrix.linker_vars }} + linker_vars: ${{ matrix.linker_vars || '' }} api_key: ${{ secrets.MEMBROWSE_API_KEY }} api_url: ${{ vars.MEMBROWSE_API_URL }} verbose: INFO @@ -87,7 +87,7 @@ jobs: continue-on-error: true uses: membrowse/membrowse-action@v1 with: - target_name: ${{ matrix.target_name }} + target_name: ${{ matrix.port }}-${{ matrix.board }}-${{ matrix.example }} identical: true api_key: ${{ secrets.MEMBROWSE_API_KEY }} api_url: ${{ vars.MEMBROWSE_API_URL }} @@ -97,5 +97,5 @@ jobs: if: steps.membrowse.outcome == 'success' || steps.membrowse-identical.outcome == 'success' uses: actions/upload-artifact@v5 with: - name: membrowse-report-${{ matrix.target_name }} + name: membrowse-report-${{ matrix.port }}-${{ matrix.board }}-${{ matrix.example }} path: ${{ steps.membrowse.outputs.report_path || steps.membrowse-identical.outputs.report_path }} -- cgit v1.3.1 From d1647044ff95f0edeb4d26011834a9fdfb7585a9 Mon Sep 17 00:00:00 2001 From: Michael Rogov Papernov Date: Sun, 25 Jan 2026 09:37:02 +0000 Subject: fix membrowse targets to match CI-built boards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The stm32h7 and samd5x_e5x targets were configured with boards that aren't built by CI (which uses --one-first flag). This caused the membrowse workflow to run in identical mode and fail on upload. - stm32h7: daisyseed → stm32h743eval - samd5x_e5x: d5035_01 → metro_m4_express --- .github/membrowse-targets.json | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/.github/membrowse-targets.json b/.github/membrowse-targets.json index 5b76f9b55..05c90c74e 100644 --- a/.github/membrowse-targets.json +++ b/.github/membrowse-targets.json @@ -330,9 +330,9 @@ }, { "port": "samd5x_e5x", - "board": "d5035_01", + "board": "metro_m4_express", "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/samd5x_e5x/boards/d5035_01/same51j19a_flash.ld", + "ld": "hw/bsp/samd5x_e5x/boards/metro_m4_express/metro_m4_express.ld", "example": "cdc_msc" }, { @@ -414,9 +414,9 @@ }, { "port": "stm32h7", - "board": "daisyseed", + "board": "stm32h743eval", "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_ram.ld", + "ld": "hw/bsp/stm32h7/linker/stm32h743xx_flash.ld", "example": "cdc_msc" }, { -- cgit v1.3.1 From 697f6b313e82cb59d034664d2c8f258f087a1269 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Mon, 26 Jan 2026 16:11:24 +0100 Subject: device/msc: skip command stage if EP out is stalled Signed-off-by: Zixun LI --- src/class/msc/msc_device.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 15bfafc35..be40c37e7 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -121,7 +121,12 @@ TU_ATTR_ALWAYS_INLINE static inline bool send_csw(mscd_interface_t* p_msc) { TU_ATTR_ALWAYS_INLINE static inline bool prepare_cbw(mscd_interface_t* p_msc) { uint8_t rhport = p_msc->rhport; p_msc->stage = MSC_STAGE_CMD; - return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t), false); + // Skip command stage until Clear Stall request if endpoint is stalled + if (!usbd_edpt_stalled(rhport, p_msc->ep_out)) { + return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t), false); + } else { + return true; + } } static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { -- cgit v1.3.1 From 31dfd673ec7549006474a03786bfd3a01508b68c Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Mon, 26 Jan 2026 17:15:23 +0100 Subject: fix stm32u0 data stride Signed-off-by: Zixun LI --- src/portable/st/stm32_fsdev/fsdev_common.h | 4 ++-- src/tusb_option.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index c53e345b0..442e738ae 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -71,11 +71,11 @@ TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 b // 1x16 bit / word access scheme #define FSDEV_PMA_STRIDE 2 #define pma_access_scheme TU_ATTR_ALIGNED(4) -#elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 +#elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 && CFG_TUSB_MCU != OPT_MCU_STM32U0 // 2x16 bit / word access scheme #define FSDEV_PMA_STRIDE 1 #define pma_access_scheme -#elif CFG_TUSB_FSDEV_PMA_SIZE == 2048 +#elif CFG_TUSB_FSDEV_PMA_SIZE == 2048 || CFG_TUSB_MCU == OPT_MCU_STM32U0 // 32 bit access scheme #define FSDEV_BUS_32BIT #define FSDEV_PMA_STRIDE 1 diff --git a/src/tusb_option.h b/src/tusb_option.h index abf5e0608..1b65cc5aa 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -343,10 +343,10 @@ #if CFG_TUSB_FSDEV_PMA_SIZE == 512 #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase - #elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 + #elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 && CFG_TUSB_MCU != OPT_MCU_STM32U0 #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 2 // 16-bit address increase - #elif CFG_TUSB_FSDEV_PMA_SIZE == 2048 + #elif CFG_TUSB_FSDEV_PMA_SIZE == 2048 || CFG_TUSB_MCU == OPT_MCU_STM32U0 #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase #endif -- cgit v1.3.1 From 78411bbefa2187bee3b9b99561a34aa75c2d562b Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 14:09:26 +0100 Subject: dcd/dwc2: Fix SEDET unable to be cleared on stm32u5 Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/dcd_dwc2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 44f7137f9..f73c36d2f 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -780,7 +780,7 @@ static void handle_bus_reset(uint8_t rhport) { dwc2->epout[0].doeptsiz |= (3 << DOEPTSIZ_STUPCNT_Pos); } - dwc2->gintmsk |= GINTMSK_OEPINT | GINTMSK_IEPINT | GINTMSK_IISOIXFRM; + dwc2->gintmsk |= GINTMSK_OTGINT | GINTMSK_OEPINT | GINTMSK_IEPINT | GINTMSK_IISOIXFRM; } static void handle_enum_done(uint8_t rhport) { @@ -1180,6 +1180,7 @@ void dcd_int_handler(uint8_t rhport) { const uint32_t otg_int = dwc2->gotgint; if (otg_int & GOTGINT_SEDET) { + dwc2->gintmsk &= ~GINTMSK_OTGINT; dcd_event_bus_signal(rhport, DCD_EVENT_UNPLUGGED, true); } -- cgit v1.3.1 From fd369937279594eb8c48a81eabebb7f66bd8306a Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:24:12 +0100 Subject: dwc2: add vbus sense config Signed-off-by: HiFiPhile --- src/device/usbd.h | 1 + src/portable/synopsys/dwc2/dcd_dwc2.c | 12 +-- src/portable/synopsys/dwc2/dwc2_stm32.h | 130 ++++++++++++++++++++++++++++++++ src/portable/synopsys/dwc2/dwc2_type.h | 45 ++++++----- src/portable/synopsys/dwc2/hcd_dwc2.c | 4 + 5 files changed, 169 insertions(+), 23 deletions(-) diff --git a/src/device/usbd.h b/src/device/usbd.h index bd5a3c395..f923b1c56 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -41,6 +41,7 @@ enum { typedef struct { uint16_t bm_double_buffered; // bitmap of IN endpoints to be double buffered, only effective for bulk endpoints + bool vbus_sensing; // Vbus pin is used for device connection detection, mandatory for tud_umount_cb() } tud_configure_dwc2_t; typedef union { diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index f73c36d2f..36cb763aa 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -78,7 +78,8 @@ CFG_TUD_MEM_SECTION static struct { } _dcd_usbbuf; static tud_configure_dwc2_t _tud_cfg = { - .bm_double_buffered = 0 + .bm_double_buffered = 0, + .vbus_sensing = false }; TU_ATTR_ALWAYS_INLINE static inline uint8_t dwc2_ep_count(const dwc2_regs_t* dwc2) { @@ -472,12 +473,11 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // Force device mode dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_FHMOD) | GUSBCFG_FDMOD; - // Clear A override, force B Valid - dwc2->gotgctl = (dwc2->gotgctl & ~GOTGCTL_AVALOEN) | GOTGCTL_BVALOEN | GOTGCTL_BVALOVAL; + // Clear A override, force B Valid if Vbus sensing is not used + dwc2->gotgctl = (dwc2->gotgctl & ~GOTGCTL_AVALOEN) | (_tud_cfg.vbus_sensing ? 0 : GOTGCTL_BVALOEN | GOTGCTL_BVALOVAL); -#if CFG_TUSB_MCU == OPT_MCU_STM32N6 - // No hardware detection of Vbus B-session is available on the STM32N6 - dwc2->stm32_gccfg |= STM32_GCCFG_VBVALOVAL; +#ifdef TUP_USBIP_DWC2_STM32 + dwc2_stm32_gccfg_cfg(dwc2, _tud_cfg.vbus_sensing, false); #endif // Enable required interrupts diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 516eb021b..a87eef068 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -300,6 +300,136 @@ static inline void dwc2_phy_update(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { } } +//------------- GCCFG configuration -------------// +static inline void dwc2_stm32_gccfg_cfg(dwc2_regs_t* dwc2, bool vbus_sensing, bool is_host) { + if (is_host) { + vbus_sensing = false; + } +#if CFG_TUSB_MCU == OPT_MCU_STM32F1 + // F1: Basic FS-only core, no VBUS sensing support + // Only PWRDWN bit is used (set in dwc2_phy_init) + (void) vbus_sensing; + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F2 || CFG_TUSB_MCU == OPT_MCU_STM32F4 + // F2/F4: Dual FS/HS with VBUSBSEN/VBUSASEN/NOVBUSSENS bits + if (is_host) { + dwc2->stm32_gccfg &= ~(STM32_GCCFG_NOVBUSSENS | STM32_GCCFG_VBUSBSEN | STM32_GCCFG_VBUSASEN); + } else { + if (vbus_sensing) { + dwc2->stm32_gccfg &= ~STM32_GCCFG_NOVBUSSENS; + dwc2->stm32_gccfg |= STM32_GCCFG_VBUSBSEN; + } else { + dwc2->stm32_gccfg |= STM32_GCCFG_NOVBUSSENS; + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBUSBSEN; + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBUSASEN; + } + } +#elif CFG_TUSB_MCU == OPT_MCU_STM32F7 + // F7: Enhanced FS/HS with battery charging detection + if (vbus_sensing) { + dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; + } + +#elif CFG_TUSB_MCU == OPT_MCU_STM32H7 + if (vbus_sensing) { + dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; + } + +#elif CFG_TUSB_MCU == OPT_MCU_STM32H7RS + // H7FS: Port0: Basic FS-only core; Port1: femtoPHY + if ((uintptr_t)dwc2 == _dwc2_controller[0].reg_base) { + if (vbus_sensing) { + dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; + } + return; + } else { + // Uses VBVALEXTOEN and VBVALOVAL for external VBUS sensing override + if (is_host) { + dwc2->stm32_gccfg |= STM32_GCCFG_PULLDOWNEN; + dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBDEN | STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_PULLDOWNEN; + if (vbus_sensing) { + dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; + dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; + dwc2->stm32_gccfg |= STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL; + } + } + } + +#elif CFG_TUSB_MCU == OPT_MCU_STM32N6 + // N6: femtoPHY + // In this device, the software override is always active + (void) vbus_sensing; + if (is_host) { + dwc2->stm32_gccfg |= STM32_GCCFG_PULLDOWNEN; + dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALOVAL); + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_PULLDOWNEN; + dwc2->stm32_gccfg |= STM32_GCCFG_VBVALOVAL; + } + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 + // L4: Low-power FS-only with VBUS detection + if (vbus_sensing) { + dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; + } + +#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + #ifdef USB_OTG_FS + // U5: FS PHY (U575/585 have FS only) + if (vbus_sensing) { + dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; + } + #else + // U5: femtoPHY (U59x/5Ax/5Fx/5Gx have HS) + // Uses VBVALEXTOEN and VBVALOVAL for external VBUS sensing override + if (is_host) { + dwc2->stm32_gccfg |= STM32_GCCFG_PULLDOWNEN; + dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBDEN | STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_PULLDOWNEN; + if (vbus_sensing) { + dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; + dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; + dwc2->stm32_gccfg |= STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL; + } + } + #endif +#elif CFG_TUSB_MCU == OPT_MCU_STM32WBA + // WBA: femtoPHY + // In this device, the software override is always active + if (is_host) { + dwc2->stm32_gccfg |= STM32_GCCFG_PULLDOWNEN; + dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALOVAL); + } else { + dwc2->stm32_gccfg &= ~STM32_GCCFG_PULLDOWNEN; + if (vbus_sensing) { + dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALOVAL); + } else { + dwc2->stm32_gccfg |= STM32_GCCFG_VBVALOVAL; + } + } + +#else + #error "Unsupported MCU family" +#endif +} + //------------- DCache -------------// #if CFG_TUD_MEM_DCACHE_ENABLE || CFG_TUH_MEM_DCACHE_ENABLE diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index 7693ce02a..2dd73c184 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -1650,23 +1650,34 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define STM32_GCCFG_PHYHSEN_Msk (0x1UL << STM32_GCCFG_PHYHSEN_Pos) // 0x00800000 #define STM32_GCCFG_PHYHSEN STM32_GCCFG_PHYHSEN_Msk // HS PHY enable -// TODO stm32u5a5 SDEN is 22nd bit, conflict with 20th bit above -//#define STM32_GCCFG_SDEN_Pos (22U) -//#define STM32_GCCFG_SDEN_Msk (0x1U << STM32_GCCFG_SDEN_Pos) // 0x00400000 -//#define STM32_GCCFG_SDEN STM32_GCCFG_SDEN_Msk // Secondary detection (PD) mode enable - -// TODO stm32u5a5 VBVALOVA is 23rd bit, conflict with PHYHSEN bit above -#define STM32_GCCFG_VBVALOVAL_Pos (23U) -#define STM32_GCCFG_VBVALOVAL_Msk (0x1U << STM32_GCCFG_VBVALOVAL_Pos) // 0x00800000 -#define STM32_GCCFG_VBVALOVAL STM32_GCCFG_VBVALOVAL_Msk // Value of VBUSVLDEXT0 femtoPHY input - -#define STM32_GCCFG_VBVALEXTOEN_Pos (24U) -#define STM32_GCCFG_VBVALEXTOEN_Msk (0x1U << STM32_GCCFG_VBVALEXTOEN_Pos) // 0x01000000 -#define STM32_GCCFG_VBVALEXTOEN STM32_GCCFG_VBVALEXTOEN_Msk // Enables of VBUSVLDEXT0 femtoPHY input override - -#define STM32_GCCFG_PULLDOWNEN_Pos (25U) -#define STM32_GCCFG_PULLDOWNEN_Msk (0x1U << STM32_GCCFG_PULLDOWNEN_Pos) // 0x02000000 -#define STM32_GCCFG_PULLDOWNEN STM32_GCCFG_PULLDOWNEN_Msk // Enables of femtoPHY pulldown resistors, used when ID PAD is disabled +// stm32f2/stm32f4 +#define STM32_GCCFG_VBUSASEN_Pos (18U) +#define STM32_GCCFG_VBUSASEN_Msk (0x1UL << STM32_GCCFG_VBUSASEN_Pos) // 0x00040000 +#define STM32_GCCFG_VBUSASEN STM32_GCCFG_VBUSASEN_Msk // Enable A-device (host) VBUS sensing +#define STM32_GCCFG_VBUSBSEN_Pos (19U) +#define STM32_GCCFG_VBUSBSEN_Msk (0x1UL << STM32_GCCFG_VBUSBSEN_Pos) // 0x00080000 +#define STM32_GCCFG_VBUSBSEN STM32_GCCFG_VBUSBSEN_Msk // Enable B-device (peripheral) VBUS sensing +#define STM32_GCCFG_NOVBUSSENS_Pos (21U) +#define STM32_GCCFG_NOVBUSSENS_Msk (0x1UL << STM32_GCCFG_NOVBUSSENS_Pos) // 0x00200000 +#define STM32_GCCFG_NOVBUSSENS STM32_GCCFG_NOVBUSSENS_Msk // VBUS sensing disable option + +// TODO: stm32u5a5 SDEN is 22nd bit, conflict with 20th bit above +// #define STM32_GCCFG_SDEN_Pos (22U) +// #define STM32_GCCFG_SDEN_Msk (0x1U << STM32_GCCFG_SDEN_Pos) // 0x00400000 +// #define STM32_GCCFG_SDEN STM32_GCCFG_SDEN_Msk // Secondary detection (PD) mode enable + +// stm32u5a5 VBVALOVA is 23rd bit, conflict with PHYHSEN bit above +#define STM32_GCCFG_VBVALOVAL_Pos (23U) +#define STM32_GCCFG_VBVALOVAL_Msk (0x1U << STM32_GCCFG_VBVALOVAL_Pos) // 0x00800000 +#define STM32_GCCFG_VBVALOVAL STM32_GCCFG_VBVALOVAL_Msk // Value of VBUSVLDEXT0 femtoPHY input + +#define STM32_GCCFG_VBVALEXTOEN_Pos (24U) +#define STM32_GCCFG_VBVALEXTOEN_Msk (0x1U << STM32_GCCFG_VBVALEXTOEN_Pos) // 0x01000000 +#define STM32_GCCFG_VBVALEXTOEN STM32_GCCFG_VBVALEXTOEN_Msk // Enables of VBUSVLDEXT0 femtoPHY input override + +#define STM32_GCCFG_PULLDOWNEN_Pos (25U) +#define STM32_GCCFG_PULLDOWNEN_Msk (0x1U << STM32_GCCFG_PULLDOWNEN_Pos) // 0x02000000 +#define STM32_GCCFG_PULLDOWNEN STM32_GCCFG_PULLDOWNEN_Msk // Enables of femtoPHY pulldown resistors, used when ID PAD is disabled /******************** Bit definition for DEACHINTMSK register ********************/ diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index c40703b09..8182fd6cc 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -428,6 +428,10 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { #endif while ((dwc2->gintsts & GINTSTS_CMOD) != GINTSTS_CMODE_HOST) {} +#ifdef TUP_USBIP_DWC2_STM32 + dwc2_stm32_gccfg_cfg(dwc2, false, true); +#endif + // configure fixed-allocated fifo scheme dfifo_host_init(rhport); -- cgit v1.3.1 From 1a299a0a0c694ffda39333e67a33dfebf1ca074f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:24:58 +0100 Subject: bsp/stm32f2: update vbus sense Signed-off-by: HiFiPhile --- hw/bsp/stm32f2/family.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c index 8ea8ec5a5..f863a59f0 100644 --- a/hw/bsp/stm32f2/family.c +++ b/hw/bsp/stm32f2/family.c @@ -31,7 +31,6 @@ #include "stm32f2xx_hal.h" #include "bsp/board_api.h" #include "board.h" - //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ @@ -105,9 +104,14 @@ void board_init(void) { /* Enable USB FS Clocks */ __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); +#if CFG_TUD_ENABLED // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = true + }; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif } //--------------------------------------------------------------------+ -- cgit v1.3.1 From d0594fbd86addc7c923af67f4eab22218a95f9ae Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:25:52 +0100 Subject: bsp/stm32f4: update vbus sense Signed-off-by: HiFiPhile --- hw/bsp/stm32f4/boards/feather_stm32f405/board.h | 10 ++-------- hw/bsp/stm32f4/boards/pyboardv11/board.h | 10 ++-------- hw/bsp/stm32f4/boards/stm32f401blackpill/board.h | 11 ++--------- hw/bsp/stm32f4/boards/stm32f407blackvet/board.h | 11 ++--------- hw/bsp/stm32f4/boards/stm32f407disco/board.h | 10 ++-------- hw/bsp/stm32f4/boards/stm32f411blackpill/board.h | 11 ++--------- hw/bsp/stm32f4/boards/stm32f411disco/board.h | 10 ++-------- hw/bsp/stm32f4/boards/stm32f412disco/board.h | 9 ++------- hw/bsp/stm32f4/boards/stm32f412nucleo/board.h | 9 ++------- hw/bsp/stm32f4/boards/stm32f439nucleo/board.h | 10 ++-------- hw/bsp/stm32f4/family.c | 9 +++++++-- 11 files changed, 27 insertions(+), 83 deletions(-) diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h index 11e976a42..2db42b98a 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h @@ -43,6 +43,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOC, @@ -106,14 +108,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART3_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.h b/hw/bsp/stm32f4/boards/pyboardv11/board.h index 9583a924b..319d2336a 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.h +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.h @@ -43,6 +43,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOB, @@ -106,14 +108,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h index 8a3fe8409..b69ebbeaf 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -44,6 +44,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 0 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOC, @@ -107,15 +109,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - // Blackpill doesn't use VBUS sense (B device) explicitly disable it - if (rhport == 0) { - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h index effbf2be8..ebefeb988 100644 --- a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h @@ -44,6 +44,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 0 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOA, @@ -106,15 +108,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Black F407VET6 doesn't use VBUS sense (B device) explicitly disable it - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/hw/bsp/stm32f4/boards/stm32f407disco/board.h index 19a029768..bcfa6059a 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.h @@ -46,6 +46,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOD, @@ -114,14 +116,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h index 61e5de70d..0faf6fe11 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -43,6 +43,8 @@ #define PINID_UART_TX 2 #define PINID_UART_RX 3 +#define VBUS_SENSE_EN 0 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOC, @@ -106,15 +108,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - // Blackpill doesn't use VBUS sense (B device) explicitly disable it - if (rhport == 0) { - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { (void) rhport; (void) state; } diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/hw/bsp/stm32f4/boards/stm32f411disco/board.h index d7b02e79d..1a289dfb5 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.h @@ -44,6 +44,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOD, @@ -111,14 +113,6 @@ static inline void board_clock_init(void) { __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - // Enable VBUS sense (B device) via pin PA9 - if (rhport == 0) { - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/hw/bsp/stm32f4/boards/stm32f412disco/board.h index d5146ae3c..0689dfe87 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.h @@ -45,6 +45,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOE, @@ -127,13 +129,6 @@ static inline void board_clock_init(void) { __HAL_RCC_USART2_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h index f7026ce61..be58f8ae7 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h @@ -45,6 +45,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOB, @@ -128,13 +130,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART3_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h index 9a348f33f..b1633b395 100644 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h @@ -46,6 +46,8 @@ #define PINID_UART_RX 3 #define PINID_VBUS0_EN 4 +#define VBUS_SENSE_EN 1 + static board_pindef_t board_pindef[] = { { // LED .port = GPIOB, @@ -117,14 +119,6 @@ static inline void board_clock_init(void) __HAL_RCC_USART3_CLK_ENABLE(); } -static inline void board_vbus_sense_init(uint8_t rhport) { - if (rhport == 0) { - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - } -} - static inline void board_vbus_set(uint8_t rhport, bool state) { if (rhport == 0) { board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 025f6a08c..2170faca7 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -180,11 +180,16 @@ void board_init(void) { #endif #if CFG_TUD_ENABLED - board_vbus_sense_init(BOARD_TUD_RHPORT); + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = VBUS_SENSE_EN + }; + tud_configure(BOARD_TUD_RHPORT, TUD_CFGID_DWC2, &cfg); + board_vbus_set(BOARD_TUD_RHPORT, false); #endif #if CFG_TUH_ENABLED - board_vbus_set(BOARD_TUD_RHPORT, true); + board_vbus_set(BOARD_TUH_RHPORT, true); #endif } -- cgit v1.3.1 From 6c4be07c74883290f5fbb13787be63f3be533898 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:26:35 +0100 Subject: bsp/stm32f7: update vbus sense Signed-off-by: HiFiPhile --- hw/bsp/stm32f7/boards/stm32f723disco/board.h | 2 +- hw/bsp/stm32f7/boards/stm32f746disco/board.h | 4 +-- hw/bsp/stm32f7/family.c | 40 +++++++++++++--------------- 3 files changed, 21 insertions(+), 25 deletions(-) diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/hw/bsp/stm32f7/boards/stm32f723disco/board.h index 35102c1f2..ca9641c68 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.h @@ -41,7 +41,7 @@ // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 1 #define PINID_LED 0 #define PINID_BUTTON 1 diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/hw/bsp/stm32f7/boards/stm32f746disco/board.h index 2964ebada..f57ffb317 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.h @@ -40,8 +40,8 @@ #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE // VBUS Sense detection -#define OTG_FS_VBUS_SENSE 0 -#define OTG_HS_VBUS_SENSE 0 +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 1 #define PINID_LED 0 #define PINID_BUTTON 1 diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index ac22c606f..fc1c0bd13 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -154,18 +154,16 @@ void board_init(void) { GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense +#if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0 + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = OTG_FS_VBUS_SENSE + }; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif + //------------- rhport1: OTG_HS -------------// #ifdef USB_HS_PHYC // MCU with built-in HS PHY such as F723, F733, F730 @@ -178,9 +176,6 @@ void board_init(void) { GPIO_InitStruct.Alternate = GPIO_AF12_OTG_HS_FS; HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - // Enable HS VBUS sense (B device) via pin PB13 - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBDEN; - /* Configure OTG-HS ID pin */ GPIO_InitStruct.Pin = GPIO_PIN_13; GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; @@ -243,17 +238,18 @@ void board_init(void) { __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); -#if OTG_HS_VBUS_SENSE - #error OTG HS VBUS Sense enabled is not implemented -#else - // No VBUS sense - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = OTG_HS_VBUS_SENSE + }; + tud_configure(1, TUD_CFGID_DWC2, &cfg); #endif + // Turn off device vbus +#if CFG_TUD_ENABLED + board_vbus_set(BOARD_TUD_RHPORT, false); +#endif // Turn on host vbus #if CFG_TUH_ENABLED board_vbus_set(BOARD_TUH_RHPORT, true); -- cgit v1.3.1 From f89ef31a3ac2b3b388a6d4b371ddedd7901e45d9 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:27:05 +0100 Subject: bsp/stm32h7: update vbus sense Signed-off-by: HiFiPhile --- hw/bsp/stm32h7/boards/stm32h743eval/board.h | 2 +- hw/bsp/stm32h7/boards/stm32h747disco/board.h | 2 +- hw/bsp/stm32h7/family.c | 46 +++++++++++++--------------- 3 files changed, 23 insertions(+), 27 deletions(-) diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 96bfc24e1..44ca58dc5 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -44,7 +44,7 @@ // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 1 // USB HS External PHY Pin: CLK, STP, DIR, NXT, D0-D7 #define ULPI_PINS \ diff --git a/hw/bsp/stm32h7/boards/stm32h747disco/board.h b/hw/bsp/stm32h7/boards/stm32h747disco/board.h index 71e8b1427..458aa48b6 100644 --- a/hw/bsp/stm32h7/boards/stm32h747disco/board.h +++ b/hw/bsp/stm32h7/boards/stm32h747disco/board.h @@ -42,7 +42,7 @@ // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 1 // USB HS External PHY Pin: CLK, STP, DIR, NXT, D0-D7 #define ULPI_PINS \ diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 054d7855f..920f222d7 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -180,18 +180,16 @@ void board_init(void) { GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense +#if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0 + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = OTG_FS_VBUS_SENSE + }; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif + //------------- USB HS -------------// #if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1) // Despite being call USB2_OTG @@ -216,28 +214,26 @@ void board_init(void) { __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE(); __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); -#if OTG_HS_VBUS_SENSE - #error OTG HS VBUS Sense enabled is not implemented -#else - // No VBUS sense - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif - - // Force device mode - USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; - USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = OTG_HS_VBUS_SENSE + }; + tud_configure(1, TUD_CFGID_DWC2, &cfg); + #endif #endif HAL_PWREx_EnableUSBVoltageDetector(); board_init2(); // optional init + // Turn off device vbus +#if CFG_TUD_ENABLED + board_vbus_set(BOARD_TUD_RHPORT, false); +#endif + // Turn on host vbus #if CFG_TUH_ENABLED - board_vbus_set(BOARD_TUH_RHPORT, 1); + board_vbus_set(BOARD_TUH_RHPORT, true); #endif } -- cgit v1.3.1 From e19dace3fb83754891d7c05f6e00237b02323fdc Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:29:07 +0100 Subject: bsp/stm32h7rs: update vbus sense Signed-off-by: HiFiPhile --- hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h | 2 +- hw/bsp/stm32h7rs/family.c | 53 ++++++++++++------------- 2 files changed, 27 insertions(+), 28 deletions(-) diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h index 4fb72cce8..16c2fd335 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h @@ -44,7 +44,7 @@ #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE // VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 +#define OTG_FS_VBUS_SENSE 0 #define OTG_HS_VBUS_SENSE 0 #define PINID_LED 0 diff --git a/hw/bsp/stm32h7rs/family.c b/hw/bsp/stm32h7rs/family.c index 784c92465..b1980f2ed 100644 --- a/hw/bsp/stm32h7rs/family.c +++ b/hw/bsp/stm32h7rs/family.c @@ -356,17 +356,16 @@ void board_init(void) { GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; HAL_GPIO_Init(GPIOM, &GPIO_InitStruct); +#endif // vbus sense - // Enable VBUS sense (B device) via pin PM14 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; +#if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0 + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = OTG_FS_VBUS_SENSE + }; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif // vbus sense #endif //------------- USB HS -------------// @@ -382,33 +381,33 @@ void board_init(void) { #if OTG_HS_VBUS_SENSE // Configure VBUS Pin - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; - HAL_GPIO_Init(GPIOM, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PM9 - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#else - // Disable VBUS sense (B device) - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + GPIO_InitTypeDef GPIO_InitStruct2; + GPIO_InitStruct2.Pin = GPIO_PIN_8; + GPIO_InitStruct2.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct2.Pull = GPIO_NOPULL; + GPIO_InitStruct2.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOM, &GPIO_InitStruct2); +#endif #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 - // B-peripheral session valid override enable - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; -#else - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_PULLDOWNEN; + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = OTG_HS_VBUS_SENSE + }; + tud_configure(1, TUD_CFGID_DWC2, &cfg); #endif -#endif #endif board_init2(); + // Turn off device vbus +#if CFG_TUD_ENABLED + board_vbus_set(BOARD_TUD_RHPORT, false); +#endif + // Turn on host vbus #if CFG_TUH_ENABLED - board_vbus_set(BOARD_TUH_RHPORT, 1); + board_vbus_set(BOARD_TUH_RHPORT, true); #endif } -- cgit v1.3.1 From 0e88879f676fd44c1c48f2b1427c441f70d82d97 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:29:32 +0100 Subject: bsp/stm32l4: update vbus sense Signed-off-by: HiFiPhile --- hw/bsp/stm32l4/boards/stm32l476disco/board.h | 11 ++--------- hw/bsp/stm32l4/boards/stm32l496nucleo/board.h | 8 ++------ hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h | 8 ++------ hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h | 8 ++------ hw/bsp/stm32l4/family.c | 12 ++++++++++-- 5 files changed, 18 insertions(+), 29 deletions(-) diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.h b/hw/bsp/stm32l4/boards/stm32l476disco/board.h index 8c766d8ea..cf84d3e66 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/board.h +++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.h @@ -51,6 +51,8 @@ #define UART_TX_PIN GPIO_PIN_5 #define UART_RX_PIN GPIO_PIN_6 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -128,15 +130,6 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); } -static inline void board_vbus_sense_init(void) -{ - // L476Disco use general GPIO PC11 for VBUS sensing instead of dedicated PA9 as others - // Disable VBUS Sense and force device mode - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN | USB_OTG_GOTGCTL_BVALOVAL; -} - #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h index 607210cec..3b031e00f 100644 --- a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h @@ -52,6 +52,8 @@ #define UART_TX_PIN GPIO_PIN_7 #define UART_RX_PIN GPIO_PIN_8 +#define VBUS_SENSE_EN 1 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -145,12 +147,6 @@ static inline void board_clock_init(void) HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h index f522e7522..94978638e 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h @@ -51,6 +51,8 @@ #define UART_TX_PIN GPIO_PIN_7 #define UART_RX_PIN GPIO_PIN_8 +#define VBUS_SENSE_EN 1 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -129,12 +131,6 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h index c181f5d4a..f603ae855 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h @@ -51,6 +51,8 @@ #define UART_TX_PIN GPIO_PIN_7 #define UART_RX_PIN GPIO_PIN_8 +#define VBUS_SENSE_EN 1 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -129,12 +131,6 @@ static inline void board_clock_init(void) HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); } -static inline void board_vbus_sense_init(void) -{ - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c index e69ae8e3b..b51a9fc8f 100644 --- a/hw/bsp/stm32l4/family.c +++ b/hw/bsp/stm32l4/family.c @@ -170,10 +170,18 @@ void board_init(void) { HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); #endif - /* Enable USB FS Clocks */ #if defined(USB_OTG_FS) + /* Enable USB FS Clocks */ __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - board_vbus_sense_init(); + + #if CFG_TUD_ENABLED + /* Set Vbus sense */ + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = VBUS_SENSE_EN + }; + tud_configure(0, TUD_CFGID_DWC2, &cfg); + #endif #else __HAL_RCC_USB_CLK_ENABLE(); #endif -- cgit v1.3.1 From 08e50a01d77c33458faf35ef475426f8c996b1f2 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:30:27 +0100 Subject: bsp/stm32n6: update jlink device Signed-off-by: HiFiPhile --- hw/bsp/stm32n6/boards/stm32n6570dk/board.cmake | 2 +- hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake | 2 +- hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/bsp/stm32n6/boards/stm32n6570dk/board.cmake b/hw/bsp/stm32n6/boards/stm32n6570dk/board.cmake index e88efefb9..00efc974c 100644 --- a/hw/bsp/stm32n6/boards/stm32n6570dk/board.cmake +++ b/hw/bsp/stm32n6/boards/stm32n6570dk/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT stm32n657xx) -set(JLINK_DEVICE stm32n6xx) +set(JLINK_DEVICE stm32n657x0) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32N657XX_AXISRAM2_fsbl.ld) diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake index e88efefb9..00efc974c 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT stm32n657xx) -set(JLINK_DEVICE stm32n6xx) +set(JLINK_DEVICE stm32n657x0) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32N657XX_AXISRAM2_fsbl.ld) diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk index 05717699c..ef27c0793 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk @@ -1,6 +1,6 @@ MCU_VARIANT = stm32n657xx CFLAGS += -DSTM32N657xx -JLINK_DEVICE = stm32n6xx +JLINK_DEVICE = stm32n657x0 LD_FILE_GCC = $(BOARD_PATH)/STM32N657XX_AXISRAM2_fsbl.ld -- cgit v1.3.1 From 7a854cf50fe6048c1a76c3bbbe07dfb1e6b0d73c Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:34:47 +0100 Subject: bsp/stm32u5: update vbus sense Signed-off-by: HiFiPhile --- hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h | 5 ++ hw/bsp/stm32u5/boards/stm32u545nucleo/board.h | 3 + hw/bsp/stm32u5/boards/stm32u575eval/board.h | 5 ++ hw/bsp/stm32u5/boards/stm32u575nucleo/board.h | 102 +++++++++++++++++++++++++ hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h | 106 +++++++++++++++++++++++++- hw/bsp/stm32u5/family.c | 34 +++++---- hw/bsp/stm32u5/family.cmake | 5 +- hw/bsp/stm32u5/family.mk | 7 +- hw/bsp/stm32u5/stm32u5xx_hal_conf.h | 4 +- 9 files changed, 249 insertions(+), 22 deletions(-) diff --git a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h index cf3f63ea5..c99743738 100644 --- a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h +++ b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h @@ -55,6 +55,8 @@ extern "C" #define UART_TX_PIN GPIO_PIN_9 #define UART_RX_PIN GPIO_PIN_10 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -110,6 +112,9 @@ static void SystemClock_Config(void) { static void SystemPower_Config(void) { } +static inline void board_vbus_sense_init(void) { +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h index 0c3439b2c..eb2b63721 100644 --- a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h @@ -110,6 +110,9 @@ static void SystemClock_Config(void) { static void SystemPower_Config(void) { } +static inline void board_vbus_sense_init(void) { +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.h b/hw/bsp/stm32u5/boards/stm32u575eval/board.h index b11f6a747..cce3e38b3 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.h @@ -56,6 +56,8 @@ extern "C" #define UART_TX_PIN GPIO_PIN_9 #define UART_RX_PIN GPIO_PIN_10 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -111,6 +113,9 @@ static void SystemClock_Config(void) { static void SystemPower_Config(void) { } +static inline void board_vbus_sense_init(void) { +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h index be037b68a..b6b60f021 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h @@ -37,6 +37,8 @@ extern "C" { #endif +#include "stm32u5xx_ll_tim.h" + // LED GREEN #define LED_PORT GPIOC #define LED_PIN GPIO_PIN_7 @@ -55,6 +57,8 @@ extern "C" #define UART_TX_PIN GPIO_PIN_7 #define UART_RX_PIN GPIO_PIN_8 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -110,6 +114,104 @@ static void SystemClock_Config(void) { static void SystemPower_Config(void) { } +static inline void board_vbus_sense_init(void) { + /* ADC config */ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADCDAC; + PeriphClkInit.AdcDacClockSelection = RCC_ADCDACCLKSOURCE_HSE; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } + __HAL_RCC_ADC12_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + GPIO_InitStruct.Pin = GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + ADC_HandleTypeDef hadc1; + hadc1.Instance = ADC1; + hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1; + hadc1.Init.Resolution = ADC_RESOLUTION_14B; + hadc1.Init.GainCompensation = 0; + hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE; + hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + hadc1.Init.LowPowerAutoWait = DISABLE; + hadc1.Init.ContinuousConvMode = DISABLE; + hadc1.Init.NbrOfConversion = 1; + hadc1.Init.DiscontinuousConvMode = DISABLE; + hadc1.Init.ExternalTrigConv = ADC_EXTERNALTRIG_T1_TRGO; + hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING; + hadc1.Init.DMAContinuousRequests = DISABLE; + hadc1.Init.TriggerFrequencyMode = ADC_TRIGGER_FREQ_HIGH; + hadc1.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; + hadc1.Init.LeftBitShift = ADC_LEFTBITSHIFT_NONE; + hadc1.Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR; + hadc1.Init.OversamplingMode = DISABLE; + if (HAL_ADC_Init(&hadc1) != HAL_OK) { + Error_Handler(); + } + + ADC_ChannelConfTypeDef sConfig = {0}; + sConfig.Channel = ADC_CHANNEL_3; + sConfig.Rank = ADC_REGULAR_RANK_1; + sConfig.SamplingTime = ADC_SAMPLETIME_68CYCLES; + sConfig.SingleDiff = ADC_SINGLE_ENDED; + sConfig.OffsetNumber = ADC_OFFSET_NONE; + sConfig.Offset = 0; + if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) { + Error_Handler(); + } + HAL_NVIC_EnableIRQ(ADC1_IRQn); + + /* TIM1 init for TRGO */ + __HAL_RCC_TIM1_CLK_ENABLE(); + TIM_HandleTypeDef htim1; + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + htim1.Instance = TIM1; + htim1.Init.Prescaler = 159; + htim1.Init.CounterMode = TIM_COUNTERMODE_UP; + htim1.Init.Period = 999; + htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + htim1.Init.RepetitionCounter = 0; + htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&htim1) != HAL_OK) { + Error_Handler(); + } + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK) { + Error_Handler(); + } + LL_TIM_SetTriggerOutput(htim1.Instance, LL_TIM_TRGO_UPDATE); + + HAL_ADCEx_Calibration_Start(&hadc1, ADC_CALIB_OFFSET, ADC_SINGLE_ENDED); + HAL_ADC_Start_IT(&hadc1); + HAL_TIM_Base_Start(&htim1); +} + +void ADC1_IRQHandler(void) { + if(LL_ADC_IsActiveFlag_EOC(ADC1) != 0) { + /* Clear flag ADC group regular end of unitary conversion */ + LL_ADC_ClearFlag_EOC(ADC1); + /* ADC code = 4.5V * R2 / (R1 + R2) * (2^14) / 3.3V + * with R1 = 330kOhm and R2 = 50kOhm + */ + const uint32_t threshold = 4500 * 50 / (50 + 330) * 16384 / 3300; + if((ADC1->DR > threshold) && (USB_OTG_FS->GOTGCTL & USB_OTG_GOTGCTL_BVALOEN)) { + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + } else { + USB_OTG_FS->GOTGCTL &= ~USB_OTG_GOTGCTL_BVALOVAL; + } + } + if(LL_ADC_IsActiveFlag_OVR(ADC1) != 0) { + /* Clear flag ADC group regular overrun */ + LL_ADC_ClearFlag_OVR(ADC1); + } +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h index 0785fb36b..15106aee6 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h @@ -37,6 +37,8 @@ extern "C" { #endif +#include "stm32u5xx_ll_tim.h" + // LED GREEN #define LED_PORT GPIOC #define LED_PIN GPIO_PIN_7 @@ -55,11 +57,13 @@ extern "C" #define UART_TX_PIN GPIO_PIN_9 #define UART_RX_PIN GPIO_PIN_10 +#define VBUS_SENSE_EN 0 + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static void SystemClock_Config(void) { +static inline void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; @@ -128,7 +132,7 @@ static void SystemClock_Config(void) { } } -static void SystemPower_Config(void) { +static inline void SystemPower_Config(void) { HAL_PWREx_EnableVddIO2(); /* @@ -141,7 +145,105 @@ static void SystemPower_Config(void) { /* USER CODE END PWR */ } +static inline void board_vbus_sense_init(void) { + /* ADC config */ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADCDAC; + PeriphClkInit.AdcDacClockSelection = RCC_ADCDACCLKSOURCE_HSE; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } + __HAL_RCC_ADC12_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + GPIO_InitStruct.Pin = GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + ADC_HandleTypeDef hadc1; + hadc1.Instance = ADC1; + hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1; + hadc1.Init.Resolution = ADC_RESOLUTION_14B; + hadc1.Init.GainCompensation = 0; + hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE; + hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + hadc1.Init.LowPowerAutoWait = DISABLE; + hadc1.Init.ContinuousConvMode = DISABLE; + hadc1.Init.NbrOfConversion = 1; + hadc1.Init.DiscontinuousConvMode = DISABLE; + hadc1.Init.ExternalTrigConv = ADC_EXTERNALTRIG_T1_TRGO; + hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING; + hadc1.Init.DMAContinuousRequests = DISABLE; + hadc1.Init.TriggerFrequencyMode = ADC_TRIGGER_FREQ_HIGH; + hadc1.Init.Overrun = ADC_OVR_DATA_OVERWRITTEN; + hadc1.Init.LeftBitShift = ADC_LEFTBITSHIFT_NONE; + hadc1.Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR; + hadc1.Init.OversamplingMode = DISABLE; + if (HAL_ADC_Init(&hadc1) != HAL_OK) { + Error_Handler(); + } + + ADC_ChannelConfTypeDef sConfig = {0}; + sConfig.Channel = ADC_CHANNEL_3; + sConfig.Rank = ADC_REGULAR_RANK_1; + sConfig.SamplingTime = ADC_SAMPLETIME_68CYCLES; + sConfig.SingleDiff = ADC_SINGLE_ENDED; + sConfig.OffsetNumber = ADC_OFFSET_NONE; + sConfig.Offset = 0; + if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) { + Error_Handler(); + } + HAL_NVIC_EnableIRQ(ADC1_2_IRQn); + + /* TIM1 init for TRGO */ + __HAL_RCC_TIM1_CLK_ENABLE(); + TIM_HandleTypeDef htim1; + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + htim1.Instance = TIM1; + htim1.Init.Prescaler = 159; + htim1.Init.CounterMode = TIM_COUNTERMODE_UP; + htim1.Init.Period = 999; + htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + htim1.Init.RepetitionCounter = 0; + htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&htim1) != HAL_OK) { + Error_Handler(); + } + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK) { + Error_Handler(); + } + LL_TIM_SetTriggerOutput(htim1.Instance, LL_TIM_TRGO_UPDATE); + + HAL_ADCEx_Calibration_Start(&hadc1, ADC_CALIB_OFFSET, ADC_SINGLE_ENDED); + HAL_ADC_Start_IT(&hadc1); + HAL_TIM_Base_Start(&htim1); +} +void ADC1_2_IRQHandler(void) { + if(LL_ADC_IsActiveFlag_EOC(ADC1) != 0) { + /* Clear flag ADC group regular end of unitary conversion */ + LL_ADC_ClearFlag_EOC(ADC1); + /* ADC code = 4.5V * R2 / (R1 + R2) * (2^14) / 3.3V + * with R1 = 330kOhm and R2 = 50kOhm + */ + const uint32_t threshold = 4500 * 50 / (50 + 330) * 16384 / 3300; + if((ADC1->DR > threshold) && (USB_OTG_HS->GOTGCTL & USB_OTG_GOTGCTL_BVALOEN)) { + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; + } else { + USB_OTG_HS->GOTGCTL &= ~USB_OTG_GOTGCTL_BVALOVAL; + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBVALOVAL; + } + } + if(LL_ADC_IsActiveFlag_OVR(ADC1) != 0) { + /* Clear flag ADC group regular overrun */ + LL_ADC_ClearFlag_OVR(ADC1); + } +} #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index 26d72d6a0..c2ea270df 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -179,18 +179,16 @@ void board_init(void) { GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; - #else - // Disable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense +#if CFG_TUD_ENABLED + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = VBUS_SENSE_EN + }; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif + /* Enable USB power on Pwrctrl CR2 register */ HAL_PWREx_EnableVddUSB(); @@ -218,13 +216,17 @@ void board_init(void) { /*Configuring the SYSCFG registers OTG_HS PHY*/ HAL_SYSCFG_EnableOTGPHY(SYSCFG_OTG_HS_PHY_ENABLE); - // Disable VBUS sense (B device) - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; +#if CFG_TUD_ENABLED + tud_configure_dwc2_t cfg = { + .bm_double_buffered = 0, + .vbus_sensing = VBUS_SENSE_EN + }; + tud_configure(0, TUD_CFGID_DWC2, &cfg); +#endif #endif // USB_OTG_FS + + /* Non-standard VBus sense settings */ + board_vbus_sense_init(); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 58dc63ae3..3d23c554d 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -45,6 +45,9 @@ function(family_add_board BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_adc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_adc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_tim.c ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -96,7 +99,7 @@ function(family_configure_example TARGET RTOS) endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes -Wno-self-assign") endif () set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 47aed10a9..3dab8c610 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -16,6 +16,7 @@ CFLAGS_GCC += \ -Wno-error=undef \ -Wno-error=unused-parameter \ -Wno-error=type-limits \ + -Wno-self-assign \ ifeq ($(TOOLCHAIN),gcc) CFLAGS_GCC += -Wno-error=maybe-uninitialized @@ -35,11 +36,15 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_adc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_adc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim.c ifneq ($(filter stm32u545xx stm32u535xx,$(MCU_VARIANT)),) SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ src/portable/st/stm32_fsdev/fsdev_common.c else SRC_C += \ diff --git a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h index 87c3683de..5d95862f6 100644 --- a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h +++ b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h @@ -36,7 +36,7 @@ #define HAL_MODULE_ENABLED -/*#define HAL_ADC_MODULE_ENABLED */ +#define HAL_ADC_MODULE_ENABLED /*#define HAL_MDF_MODULE_ENABLED */ /*#define HAL_COMP_MODULE_ENABLED */ /*#define HAL_CORDIC_MODULE_ENABLED */ @@ -76,7 +76,7 @@ /*#define HAL_SMBUS_MODULE_ENABLED */ /*#define HAL_SPI_MODULE_ENABLED */ /*#define HAL_SRAM_MODULE_ENABLED */ -/*#define HAL_TIM_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED /*#define HAL_TSC_MODULE_ENABLED */ /*#define HAL_RAMCFG_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -- cgit v1.3.1 From 42f623a2a7dbd2246368ac2df0ed8c90480d7156 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 30 Jan 2026 19:34:54 +0100 Subject: bsp/stm32wba: update vbus sense Signed-off-by: HiFiPhile --- hw/bsp/stm32wba/family.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/hw/bsp/stm32wba/family.c b/hw/bsp/stm32wba/family.c index 8dc6547ae..d05415755 100644 --- a/hw/bsp/stm32wba/family.c +++ b/hw/bsp/stm32wba/family.c @@ -172,14 +172,7 @@ void board_init(void) { // Configuring the SYSCFG registers OTG_HS PHY SYSCFG->OTGHSPHYCR |= SYSCFG_OTGHSPHYCR_EN; - - // Disable VBUS sense (B device) - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; - #endif // USB_OTG_FS + #endif // USB_OTG_HS } void board_led_write(bool state) { HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); } -- cgit v1.3.1 From c57d355af63080ab425143d1ce7a4579100b626f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 31 Jan 2026 16:32:58 +0100 Subject: dwc2: add stm32n6 DMA regions Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/dwc2_stm32.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index a87eef068..3da78b893 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -85,8 +85,11 @@ extern "C" { #define EP_MAX_HS 9 #define EP_FIFO_SIZE_HS 4096 - #define USB_OTG_HS_PERIPH_BASE USB1_OTG_HS_BASE - #define OTG_HS_IRQn USB1_OTG_HS_IRQn + #define USB_OTG_FS_PERIPH_BASE USB1_OTG_HS_BASE + #define OTG_FS_IRQn USB1_OTG_HS_IRQn + + #define USB_OTG_HS_PERIPH_BASE USB2_OTG_HS_BASE + #define OTG_HS_IRQn USB2_OTG_HS_IRQn #elif CFG_TUSB_MCU == OPT_MCU_STM32F7 #include "stm32f7xx.h" @@ -451,8 +454,13 @@ static mem_region_t uncached_regions[] = { // DTCM (although USB DMA can't transfer to/from DTCM) {.start = 0x20000000, .end = 0x2002FFFF}, #elif CFG_TUSB_MCU == OPT_MCU_STM32F7 - // DTCM + // DTCM {.start = 0x20000000, .end = 0x2000FFFF}, +#elif CFG_TUSB_MCU == OPT_MCU_STM32N6 + // DTCM NS + {.start = 0x20000000, .end = 0x2003FFFF}, + // DTCM S + {.start = 0x30000000, .end = 0x3003FFFF}, #else #error "Cache maintenance is not supported yet" #endif -- cgit v1.3.1 From be24a38a65d8e22fed461b4058e3deb97d5a2907 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 31 Jan 2026 17:11:31 +0100 Subject: bsp/stm32n6: make both ports work Signed-off-by: HiFiPhile --- hw/bsp/stm32n6/boards/stm32n6570dk/board.h | 41 +-- hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake | 7 + hw/bsp/stm32n6/boards/stm32n657nucleo/board.h | 33 +- hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk | 3 + hw/bsp/stm32n6/family.c | 120 ++++++- hw/bsp/stm32n6/family.cmake | 7 +- hw/bsp/stm32n6/family.mk | 6 +- hw/bsp/stm32n6/setup_iar.mac | 12 + hw/bsp/stm32n6/stm32n6.jdebug | 362 ++++++++++++++++++++++ hw/bsp/stm32n6/stm32n6xx_hal_conf.h | 2 +- 10 files changed, 539 insertions(+), 54 deletions(-) create mode 100644 hw/bsp/stm32n6/setup_iar.mac create mode 100644 hw/bsp/stm32n6/stm32n6.jdebug diff --git a/hw/bsp/stm32n6/boards/stm32n6570dk/board.h b/hw/bsp/stm32n6/boards/stm32n6570dk/board.h index bbcad6340..8c2ec66dc 100644 --- a/hw/bsp/stm32n6/boards/stm32n6570dk/board.h +++ b/hw/bsp/stm32n6/boards/stm32n6570dk/board.h @@ -44,17 +44,16 @@ extern "C" { #define UART_DEV USART1 #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define BOARD_TUD_RHPORT 1 - // VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 1 +#define OTG_FS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 0 #define PINID_LED 0 #define PINID_BUTTON 1 #define PINID_UART_TX 2 #define PINID_UART_RX 3 #define PINID_TCPP0203_EN 4 +#define PINID_PWR_USB2 8 static board_pindef_t board_pindef[] = { {// LED @@ -77,21 +76,22 @@ static board_pindef_t board_pindef[] = { .port = GPIOA, .pin_init = {.Pin = GPIO_PIN_4, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, .active_state = 0}, - { - // I2C SCL for TCPP0203 - .port = GPIOD, - .pin_init = {.Pin = GPIO_PIN_14, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + { // I2C SCL for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_14, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, }, - { - // I2C SDA for TCPP0203 - .port = GPIOD, - .pin_init = {.Pin = GPIO_PIN_4, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + {// I2C SDA for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_4, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, }, - { - // INT for TCPP0203 - .port = GPIOD, - .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + {// INT for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, }, + {// PWR for USB2 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_9, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + } }; //--------------------------------------------------------------------+ @@ -262,9 +262,12 @@ static inline void board_init2(void) { } void board_vbus_set(uint8_t rhport, bool state) { - (void) state; - if (rhport == 1) { - TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + if (rhport == 0) { + uint8_t switch_state = state ? TCPP0203_GD_PROVIDER_SWITCH_CLOSED : TCPP0203_GD_PROVIDER_SWITCH_OPEN; + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, switch_state) == TCPP0203_OK, ); + } else if (rhport == 1) { + board_pindef_t *pindef = &board_pindef[PINID_PWR_USB2]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state ? GPIO_PIN_SET : GPIO_PIN_RESET); } } diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake index 00efc974c..e682cabcb 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake @@ -3,6 +3,13 @@ set(JLINK_DEVICE stm32n657x0) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32N657XX_AXISRAM2_fsbl.ld) +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32N657xx diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h index 33c68f7cf..5bdbaff3c 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h @@ -44,11 +44,9 @@ extern "C" { #define UART_DEV USART1 #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define BOARD_TUD_RHPORT 1 - // VBUS Sense detection -#define OTG_FS_VBUS_SENSE 1 -#define OTG_HS_VBUS_SENSE 1 +#define OTG_FS_VBUS_SENSE 0 +#define OTG_HS_VBUS_SENSE 0 #define PINID_LED 0 #define PINID_BUTTON 1 @@ -77,20 +75,17 @@ static board_pindef_t board_pindef[] = { .port = GPIOA, .pin_init = {.Pin = GPIO_PIN_7, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, .active_state = 0}, - { - // I2C SCL for TCPP0203 - .port = GPIOB, - .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + {// I2C SCL for TCPP0203 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, }, - { - // I2C SDA for TCPP0203 - .port = GPIOB, - .pin_init = {.Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + {// I2C SDA for TCPP0203 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, }, - { - // INT for TCPP0203 - .port = GPIOD, - .pin_init = {.Pin = GPIO_PIN_2, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + {// INT for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_2, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, }, }; @@ -262,9 +257,9 @@ static inline void board_init2(void) { } void board_vbus_set(uint8_t rhport, bool state) { - (void) state; - if (rhport == 1) { - TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + if (rhport == 0) { + uint8_t switch_state = state ? TCPP0203_GD_PROVIDER_SWITCH_CLOSED : TCPP0203_GD_PROVIDER_SWITCH_OPEN; + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, switch_state) == TCPP0203_OK, ); } } diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk index ef27c0793..efbb82611 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk @@ -4,6 +4,9 @@ JLINK_DEVICE = stm32n657x0 LD_FILE_GCC = $(BOARD_PATH)/STM32N657XX_AXISRAM2_fsbl.ld +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 + # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32n6/family.c b/hw/bsp/stm32n6/family.c index 567bb7294..c839e6b3e 100644 --- a/hw/bsp/stm32n6/family.c +++ b/hw/bsp/stm32n6/family.c @@ -48,7 +48,8 @@ TU_ATTR_UNUSED static void Error_Handler(void) { } void HardFault_Handler(void); - +static void MPU_Config(void); +static void SystemIsolation_Config(void); typedef struct { GPIO_TypeDef* port; GPIO_InitTypeDef pin_init; @@ -87,20 +88,25 @@ static UART_HandleTypeDef UartHandle = { // Despite being call USB2_OTG_FS on some MCUs // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port void USB2_OTG_HS_IRQHandler(void) { - tusb_int_handler(0, true); + tusb_int_handler(1, true); } // Despite being call USB1_OTG_HS on some MCUs // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port void USB1_OTG_HS_IRQHandler(void) { - tusb_int_handler(1, true); + tusb_int_handler(0, true); } void board_init(void) { - /* Enable BusFault and SecureFault handlers (HardFault is default) */ SCB->SHCSR |= (SCB_SHCSR_BUSFAULTENA_Msk | SCB_SHCSR_SECUREFAULTENA_Msk); + MPU_Config(); + SystemIsolation_Config(); + + SCB_EnableICache(); + SCB_EnableDCache(); + HAL_PWREx_EnableVddA(); HAL_PWREx_EnableVddIO2(); HAL_PWREx_EnableVddIO3(); @@ -126,8 +132,6 @@ void board_init(void) { __HAL_RCC_GPIOP_CLK_ENABLE(); __HAL_RCC_GPIOQ_CLK_ENABLE(); - // HAL_ICACHE_Enable(); - for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); } @@ -155,7 +159,7 @@ void board_init(void) { HAL_UART_Init(&UartHandle); #endif - +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 0) __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); __HAL_RCC_PWR_CLK_ENABLE(); HAL_PWREx_EnableVddUSBVMEN(); @@ -196,11 +200,109 @@ void board_init(void) { /* Peripheral PHY clock enable */ __HAL_RCC_USB1_OTG_HS_PHY_CLK_ENABLE(); - board_init2(); +#if CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 0 + board_vbus_set(BOARD_TUH_RHPORT, 1); +#endif +#endif + +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1) + __HAL_RCC_USB2_OTG_HS_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + HAL_PWREx_EnableVddUSBVMEN(); + while(__HAL_PWR_GET_FLAG(PWR_FLAG_USB33RDY)); + HAL_PWREx_EnableVddUSB(); + + LL_AHB5_GRP1_ForceReset(0x00800000); + __HAL_RCC_USB2_OTG_HS_FORCE_RESET(); + __HAL_RCC_USB2_OTG_HS_PHY_FORCE_RESET(); + + LL_RCC_HSE_SelectHSEDiv2AsDiv2Clock(); + LL_AHB5_GRP1_ReleaseReset(0x00800000); + + /* Peripheral clock enable */ + __HAL_RCC_USB2_OTG_HS_CLK_ENABLE(); + + /* Required few clock cycles before accessing USB PHY Controller Registers */ + for (volatile uint32_t i = 0; i < 10; i++) { + __NOP(); // No Operation instruction to create a delay + } + + USB2_HS_PHYC->USBPHYC_CR &= ~(0x7 << 0x4); + + USB2_HS_PHYC->USBPHYC_CR |= (0x1 << 16) | + (0x2 << 4) | + (0x1 << 2) | + 0x1U; -#if CFG_TUH_ENABLED + __HAL_RCC_USB2_OTG_HS_PHY_RELEASE_RESET(); + + /* Required few clock cycles before Releasing Reset */ + for (volatile uint32_t i = 0; i < 10; i++) { + __NOP(); // No Operation instruction to create a delay + } + + __HAL_RCC_USB2_OTG_HS_RELEASE_RESET(); + + /* Peripheral PHY clock enable */ + __HAL_RCC_USB2_OTG_HS_PHY_CLK_ENABLE(); + +#if CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1 board_vbus_set(BOARD_TUH_RHPORT, 1); #endif +#endif + + board_init2(); +} + +static void MPU_Config(void) +{ + MPU_Region_InitTypeDef default_config = {0}; + MPU_Attributes_InitTypeDef attr_config = {0}; + uint32_t primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* disable the MPU */ + HAL_MPU_Disable(); + + /* create an attribute configuration for the MPU */ + attr_config.Attributes = INNER_OUTER(MPU_NOT_CACHEABLE); + attr_config.Number = MPU_ATTRIBUTES_NUMBER0; + + HAL_MPU_ConfigMemoryAttributes(&attr_config); + + /* Create a non cacheable region */ + /*Normal memory type, code execution allowed */ + default_config.Enable = MPU_REGION_ENABLE; + default_config.Number = MPU_REGION_NUMBER0; + default_config.BaseAddress = __NON_CACHEABLE_SECTION_BEGIN; + default_config.LimitAddress = __NON_CACHEABLE_SECTION_END; + default_config.DisableExec = MPU_INSTRUCTION_ACCESS_ENABLE; + default_config.AccessPermission = MPU_REGION_ALL_RW; + default_config.IsShareable = MPU_ACCESS_NOT_SHAREABLE; + default_config.AttributesIndex = MPU_ATTRIBUTES_NUMBER0; + HAL_MPU_ConfigRegion(&default_config); + + /* enable the MPU */ + HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT); + + /* Exit critical section to lock the system and avoid any issue around MPU mechanisme */ + __set_PRIMASK(primask_bit); +} + +static void SystemIsolation_Config(void) { + /* set all required IPs as secure privileged */ + __HAL_RCC_RIFSC_CLK_ENABLE(); + RIMC_MasterConfig_t RIMC_master = {0}; + RIMC_master.MasterCID = RIF_CID_1; + RIMC_master.SecPriv = RIF_ATTRIBUTE_SEC | RIF_ATTRIBUTE_PRIV; + + /*RIMC configuration*/ + HAL_RIF_RIMC_ConfigMasterAttributes(RIF_MASTER_INDEX_OTG1, &RIMC_master); + HAL_RIF_RIMC_ConfigMasterAttributes(RIF_MASTER_INDEX_OTG2, &RIMC_master); + + /*RISUP configuration*/ + HAL_RIF_RISC_SetSlaveSecureAttributes(RIF_RISC_PERIPH_INDEX_OTG1HS , RIF_ATTRIBUTE_SEC | RIF_ATTRIBUTE_PRIV); + HAL_RIF_RISC_SetSlaveSecureAttributes(RIF_RISC_PERIPH_INDEX_OTG2HS , RIF_ATTRIBUTE_SEC | RIF_ATTRIBUTE_PRIV); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake index 6c7aaea61..972138018 100644 --- a/hw/bsp/stm32n6/family.cmake +++ b/hw/bsp/stm32n6/family.cmake @@ -21,7 +21,7 @@ set(FAMILY_MCUS STM32N6 CACHE INTERNAL "") # Port & Speed Selection # ---------------------- if (NOT DEFINED RHPORT_DEVICE) - set(RHPORT_DEVICE 1) + set(RHPORT_DEVICE 0) endif () if (NOT DEFINED RHPORT_HOST) set(RHPORT_HOST 1) @@ -68,6 +68,7 @@ function(family_add_board BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rif.c ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -80,8 +81,8 @@ function(family_add_board BOARD_TARGET) BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} BOARD_TUH_RHPORT=${RHPORT_HOST} BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} - SEGGER_RTT_SECTION="noncacheable_buffer" - BUFFER_SIZE_UP=0x3000 + SEGGER_RTT_SECTION=".noncacheable" + BUFFER_SIZE_UP=0x4000 ) update_board(${BOARD_TARGET}) diff --git a/hw/bsp/stm32n6/family.mk b/hw/bsp/stm32n6/family.mk index 45554e251..9fef533b1 100644 --- a/hw/bsp/stm32n6/family.mk +++ b/hw/bsp/stm32n6/family.mk @@ -12,7 +12,7 @@ CPU_CORE ?= cortex-m55 # ---------------------- # Port & Speed Selection # ---------------------- -RHPORT_DEVICE ?= 1 +RHPORT_DEVICE ?= 0 RHPORT_HOST ?= 1 ifndef RHPORT_DEVICE_SPEED @@ -32,8 +32,8 @@ CFLAGS += \ -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ - -DSEGGER_RTT_SECTION=\"noncacheable_buffer\" \ - -DBUFFER_SIZE_UP=0x3000 \ + -DSEGGER_RTT_SECTION="\".noncacheable\"" \ + -DBUFFER_SIZE_UP=0x4000 \ # GCC Flags CFLAGS_GCC += \ diff --git a/hw/bsp/stm32n6/setup_iar.mac b/hw/bsp/stm32n6/setup_iar.mac new file mode 100644 index 000000000..b6f2bc97a --- /dev/null +++ b/hw/bsp/stm32n6/setup_iar.mac @@ -0,0 +1,12 @@ +/* Called once after the target reset. */ +execUserReset() +{ + /* Re-load image as AIXRAM2 is erased after CPU reset */ + __loadImage("$EXE_DIR$\\$TARGET_BNAME$.hex", 0, 0); + + __restoreSoftwareBreakpoints(); + + #PC = __readMemory32(0x34180404, "Memory"); + + #SP = 0x341FFD00; +} diff --git a/hw/bsp/stm32n6/stm32n6.jdebug b/hw/bsp/stm32n6/stm32n6.jdebug new file mode 100644 index 000000000..81490db5d --- /dev/null +++ b/hw/bsp/stm32n6/stm32n6.jdebug @@ -0,0 +1,362 @@ +/********************************************************************* +* (c) SEGGER Microcontroller GmbH * +* The Embedded Experts * +* www.segger.com * +********************************************************************** + +File : +Created : 31. Jan 2026 16:34 +Ozone Version : V3.40e +*/ + +/********************************************************************* +* +* OnProjectLoad +* +* Function description +* Project load routine. Required. +* +********************************************************************** +*/ +void OnProjectLoad (void) { + // + // Dialog-generated settings + // + Project.SetDevice ("STM32N657X0"); + Project.SetHostIF ("USB", ""); + Project.SetTargetIF ("SWD"); + Project.SetTIFSpeed ("4 MHz"); + Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M55F.svd"); + // + // User settings + // + File.Open ("$(ProjectDir)/../../../examples/device/cdc_msc/build/stm32n6570dk/RelWithDebInfo/cdc_msc.elf"); +} + +/********************************************************************* +* +* OnStartupComplete +* +* Function description +* Called when program execution has reached/passed +* the startup completion point. Optional. +* +********************************************************************** +*/ +//void OnStartupComplete (void) { +//} + +/********************************************************************* +* +* TargetReset +* +* Function description +* Replaces the default target device reset routine. Optional. +* +* Notes +* This example demonstrates the usage when +* debugging an application in RAM on a Cortex-M target device. +* +********************************************************************** +*/ +//void TargetReset (void) { +// +// unsigned int SP; +// unsigned int PC; +// unsigned int VectorTableAddr; +// +// VectorTableAddr = Elf.GetBaseAddr(); +// // +// // Set up initial stack pointer +// // +// if (VectorTableAddr != 0xFFFFFFFF) { +// SP = Target.ReadU32(VectorTableAddr); +// Target.SetReg("SP", SP); +// } +// // +// // Set up entry point PC +// // +// PC = Elf.GetEntryPointPC(); +// +// if (PC != 0xFFFFFFFF) { +// Target.SetReg("PC", PC); +// } else if (VectorTableAddr != 0xFFFFFFFF) { +// PC = Target.ReadU32(VectorTableAddr + 4); +// Target.SetReg("PC", PC); +// } else { +// Util.Error("Project file error: failed to set entry point PC", 1); +// } +//} + +/********************************************************************* +* +* BeforeTargetReset +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetReset (void) { +//} + +/********************************************************************* +* +* AfterTargetReset +* +* Function description +* Event handler routine. Optional. +* The default implementation initializes SP and PC to reset values. +** +********************************************************************** +*/ +void AfterTargetReset (void) { + _SetupTarget(); +} + +/********************************************************************* +* +* DebugStart +* +* Function description +* Replaces the default debug session startup routine. Optional. +* +********************************************************************** +*/ +//void DebugStart (void) { +//} + +/********************************************************************* +* +* TargetConnect +* +* Function description +* Replaces the default target IF connection routine. Optional. +* +********************************************************************** +*/ +//void TargetConnect (void) { +//} + +/********************************************************************* +* +* BeforeTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetConnect (void) { +//} + +/********************************************************************* +* +* AfterTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetConnect (void) { +//} + +/********************************************************************* +* +* TargetDownload +* +* Function description +* Replaces the default program download routine. Optional. +* +********************************************************************** +*/ +//void TargetDownload (void) { +//} + +/********************************************************************* +* +* BeforeTargetDownload +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDownload (void) { +//} + +/********************************************************************* +* +* AfterTargetDownload +* +* Function description +* Event handler routine. Optional. +* The default implementation initializes SP and PC to reset values. +* +********************************************************************** +*/ +void AfterTargetDownload (void) { + //_SetupTarget(); +} + +/********************************************************************* +* +* BeforeTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetHalt +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetHalt (void) { +//} + +/********************************************************************* +* +* BeforeTargetResume +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetResume (void) { +//} + +/********************************************************************* +* +* OnSnapshotLoad +* +* Function description +* Called upon loading a snapshot. Optional. +* +* Additional information +* This function is used to restore the target state in cases +* where values cannot simply be written to the target. +* Typical use: GPIO clock needs to be enabled, before +* GPIO is configured. +* +********************************************************************** +*/ +//void OnSnapshotLoad (void) { +//} + +/********************************************************************* +* +* OnSnapshotSave +* +* Function description +* Called upon saving a snapshot. Optional. +* +* Additional information +* This function is usually used to save values of the target +* state which can either not be trivially read, +* or need to be restored in a specific way or order. +* Typically use: Memory Mapped Registers, +* such as PLL and GPIO configuration. +* +********************************************************************** +*/ +//void OnSnapshotSave (void) { +//} + +/********************************************************************* +* +* OnError +* +* Function description +* Called when an error occurred. Optional. +* +********************************************************************** +*/ +//void OnError (void) { +//} + +/********************************************************************* +* +* AfterProjectLoad +* +* Function description +* After Project load routine. Optional. +* +********************************************************************** +*/ +//void AfterProjectLoad (void) { +//} + +/********************************************************************* +* +* OnDebugStartBreakSymbolReached +* +* Function description +* Called when program execution has reached/passed +* the symbol to be breaked at during debug start. Optional. +* +********************************************************************** +*/ +//void OnDebugStartBreakSymReached (void) { +//} + +/********************************************************************* +* +* _SetupTarget +* +* Function description +* Setup the target. +* Called by AfterTargetReset() and AfterTargetDownload(). +* +* Auto-generated function. May be overridden by Ozone. +* +********************************************************************** +*/ +void _SetupTarget(void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + Debug.Download(); + Debug.Halt(); + + VectorTableAddr = Elf.GetBaseAddr(); + // + // Set up initial stack pointer + // + SP = Target.ReadU32(VectorTableAddr); + if (SP != 0xFFFFFFFF) { + Target.SetReg("SP", SP); + } + // + // Set up entry point PC + // + PC = Elf.GetEntryPointPC(); + if (PC != 0xFFFFFFFF) { + Target.SetReg("PC", PC); + } else { + Util.Error("Project script error: failed to set up entry point PC", 1); + } +} diff --git a/hw/bsp/stm32n6/stm32n6xx_hal_conf.h b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h index 00cb31159..49ca767fe 100644 --- a/hw/bsp/stm32n6/stm32n6xx_hal_conf.h +++ b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h @@ -67,7 +67,7 @@ /*#define HAL_PKA_MODULE_ENABLED */ /*#define HAL_PSSI_MODULE_ENABLED */ /*#define HAL_RAMCFG_MODULE_ENABLED */ -/*#define HAL_RIF_MODULE_ENABLED */ +#define HAL_RIF_MODULE_ENABLED /*#define HAL_RNG_MODULE_ENABLED */ /*#define HAL_RTC_MODULE_ENABLED */ /*#define HAL_SAI_MODULE_ENABLED */ -- cgit v1.3.1 From b73df6c22e4743f9232f7922fe2cf0fbd05a3a2e Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Sun, 1 Feb 2026 21:08:03 +0100 Subject: Limit events processed by tud_task_ext() / tuh_task_ext() --- src/device/usbd.c | 9 +++++++-- src/host/usbh.c | 9 +++++++-- src/tusb_option.h | 10 ++++++++++ 3 files changed, 24 insertions(+), 4 deletions(-) diff --git a/src/device/usbd.c b/src/device/usbd.c index 1e21c667a..8f3a7a226 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -666,8 +666,13 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { return; } - // Loop until there is no more events in the queue - while (1) { + // Loop until there are no more events in the queue or CFG_TUD_TASK_EVENTS_PER_RUN is reached + for (unsigned epr = 0;; epr++) { +#if CFG_TUD_TASK_EVENTS_PER_RUN > 0 + if (epr >= CFG_TUD_TASK_EVENTS_PER_RUN) { + TU_LOG_USBD("USBD event limit (" TU_XSTRING(CFG_TUD_TASK_EVENTS_PER_RUN) ") reached\r\n"); + } +#endif dcd_event_t event; if (!osal_queue_receive(_usbd_q, &event, timeout_ms)) { return; diff --git a/src/host/usbh.c b/src/host/usbh.c index a725b7c8b..cc99c0a53 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -599,8 +599,13 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { return; } - // Loop until there is no more events in the queue - while (1) { + // Loop until there are no more events in the queue or CFG_TUH_TASK_EVENTS_PER_RUN is reached + for (unsigned epr = 0;; epr++) { +#if CFG_TUH_TASK_EVENTS_PER_RUN > 0 + if (epr >= CFG_TUH_TASK_EVENTS_PER_RUN) { + TU_LOG_USBH("USBH event limit (" TU_XSTRING(CFG_TUH_TASK_EVENTS_PER_RUN) ") reached\r\n"); + } +#endif hcd_event_t event; if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) { return; } diff --git a/src/tusb_option.h b/src/tusb_option.h index abf5e0608..d34f2b710 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -560,6 +560,11 @@ #define CFG_TUD_INTERFACE_MAX 16 #endif +// max events processed in one tud_task_ext() call, 0 for unlimited +#ifndef CFG_TUD_TASK_EVENTS_PER_RUN + #define CFG_TUD_TASK_EVENTS_PER_RUN 16 +#endif + // default to max hardware endpoint, but can be smaller to save RAM #ifndef CFG_TUD_ENDPPOINT_MAX #define CFG_TUD_ENDPPOINT_MAX TUP_DCD_ENDPOINT_MAX @@ -679,6 +684,11 @@ #define CFG_TUH_MEM_DCACHE_LINE_SIZE CFG_TUSB_MEM_DCACHE_LINE_SIZE #endif +// max events processed in one tuh_task_ext() call, 0 for unlimited +#ifndef CFG_TUH_TASK_EVENTS_PER_RUN + #define CFG_TUH_TASK_EVENTS_PER_RUN 16 +#endif + //------------- CLASS -------------// #ifndef CFG_TUH_HUB -- cgit v1.3.1 From d2f1b1899d4dbdab2a5bfd822c3bbe5fc0ee8deb Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Sun, 1 Feb 2026 22:29:52 +0100 Subject: Actually exit the loop in addition to logging. ENOTENOUGHCOFFEE --- src/device/usbd.c | 1 + src/host/usbh.c | 1 + 2 files changed, 2 insertions(+) diff --git a/src/device/usbd.c b/src/device/usbd.c index 8f3a7a226..cca4169d7 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -671,6 +671,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { #if CFG_TUD_TASK_EVENTS_PER_RUN > 0 if (epr >= CFG_TUD_TASK_EVENTS_PER_RUN) { TU_LOG_USBD("USBD event limit (" TU_XSTRING(CFG_TUD_TASK_EVENTS_PER_RUN) ") reached\r\n"); + break; } #endif dcd_event_t event; diff --git a/src/host/usbh.c b/src/host/usbh.c index cc99c0a53..41f41dcfb 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -604,6 +604,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { #if CFG_TUH_TASK_EVENTS_PER_RUN > 0 if (epr >= CFG_TUH_TASK_EVENTS_PER_RUN) { TU_LOG_USBH("USBH event limit (" TU_XSTRING(CFG_TUH_TASK_EVENTS_PER_RUN) ") reached\r\n"); + break; } #endif hcd_event_t event; -- cgit v1.3.1 -- cgit v1.3.1 From fa2e076d723c50bb8f361b491126393cf33f2508 Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Tue, 3 Feb 2026 08:20:18 +0000 Subject: Fix DFU descriptor version from 1.0.1 (0x0101) to 1.1.0 (0x0110) Co-authored-by: hathach <249515+hathach@users.noreply.github.com> --- hw/mcu/raspberry_pi/Pico-PIO-USB | 1 + hw/mcu/st/cmsis_device_f4 | 1 + hw/mcu/st/stm32f4xx_hal_driver | 1 + lib/CMSIS_5 | 1 + lib/FreeRTOS-Kernel | 1 + lib/lwip | 1 + src/device/usbd.h | 4 ++-- tools/linkermap | 1 + tools/uf2 | 1 + 9 files changed, 10 insertions(+), 2 deletions(-) create mode 160000 hw/mcu/raspberry_pi/Pico-PIO-USB create mode 160000 hw/mcu/st/cmsis_device_f4 create mode 160000 hw/mcu/st/stm32f4xx_hal_driver create mode 160000 lib/CMSIS_5 create mode 160000 lib/FreeRTOS-Kernel create mode 160000 lib/lwip create mode 160000 tools/linkermap create mode 160000 tools/uf2 diff --git a/hw/mcu/raspberry_pi/Pico-PIO-USB b/hw/mcu/raspberry_pi/Pico-PIO-USB new file mode 160000 index 000000000..675543bcc --- /dev/null +++ b/hw/mcu/raspberry_pi/Pico-PIO-USB @@ -0,0 +1 @@ +Subproject commit 675543bcc9baa8170f868ab7ba316d418dbcf41f diff --git a/hw/mcu/st/cmsis_device_f4 b/hw/mcu/st/cmsis_device_f4 new file mode 160000 index 000000000..3c77349ce --- /dev/null +++ b/hw/mcu/st/cmsis_device_f4 @@ -0,0 +1 @@ +Subproject commit 3c77349ce04c8af401454cc51f85ea9a50e34fc1 diff --git a/hw/mcu/st/stm32f4xx_hal_driver b/hw/mcu/st/stm32f4xx_hal_driver new file mode 160000 index 000000000..b6f0ed382 --- /dev/null +++ b/hw/mcu/st/stm32f4xx_hal_driver @@ -0,0 +1 @@ +Subproject commit b6f0ed3829f3829eb358a2e7417d80bba1a42db7 diff --git a/lib/CMSIS_5 b/lib/CMSIS_5 new file mode 160000 index 000000000..2b7495b85 --- /dev/null +++ b/lib/CMSIS_5 @@ -0,0 +1 @@ +Subproject commit 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c diff --git a/lib/FreeRTOS-Kernel b/lib/FreeRTOS-Kernel new file mode 160000 index 000000000..cc0e0707c --- /dev/null +++ b/lib/FreeRTOS-Kernel @@ -0,0 +1 @@ +Subproject commit cc0e0707c0c748713485b870bb980852b210877f diff --git a/lib/lwip b/lib/lwip new file mode 160000 index 000000000..159e31b68 --- /dev/null +++ b/lib/lwip @@ -0,0 +1 @@ +Subproject commit 159e31b689577dbf69cf0683bbaffbd71fa5ee10 diff --git a/src/device/usbd.h b/src/device/usbd.h index bd5a3c395..4016a45a4 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -819,7 +819,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Interface */ \ 9, TUSB_DESC_INTERFACE, _itfnum, 0, 0, TUD_DFU_APP_CLASS, TUD_DFU_APP_SUBCLASS, DFU_PROTOCOL_RT, _stridx, \ /* Function */ \ - 9, DFU_DESC_FUNCTIONAL, _attr, U16_TO_U8S_LE(_timeout), U16_TO_U8S_LE(_xfer_size), U16_TO_U8S_LE(0x0101) + 9, DFU_DESC_FUNCTIONAL, _attr, U16_TO_U8S_LE(_timeout), U16_TO_U8S_LE(_xfer_size), U16_TO_U8S_LE(0x0110) //--------------------------------------------------------------------+ // DFU Descriptor Templates @@ -833,7 +833,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ #define TUD_DFU_DESCRIPTOR(_itfnum, _alt_count, _stridx, _attr, _timeout, _xfer_size) \ TU_XSTRCAT(TUD_DFU_ALT_,_alt_count)(_itfnum, 0, _stridx), \ /* Function */ \ - 9, DFU_DESC_FUNCTIONAL, _attr, U16_TO_U8S_LE(_timeout), U16_TO_U8S_LE(_xfer_size), U16_TO_U8S_LE(0x0101) + 9, DFU_DESC_FUNCTIONAL, _attr, U16_TO_U8S_LE(_timeout), U16_TO_U8S_LE(_xfer_size), U16_TO_U8S_LE(0x0110) #define TUD_DFU_ALT(_itfnum, _alt, _stridx) \ /* Interface */ \ diff --git a/tools/linkermap b/tools/linkermap new file mode 160000 index 000000000..8e1f440fa --- /dev/null +++ b/tools/linkermap @@ -0,0 +1 @@ +Subproject commit 8e1f440fa15c567aceb5aa0d14f6d18c329cc67f diff --git a/tools/uf2 b/tools/uf2 new file mode 160000 index 000000000..c594542b2 --- /dev/null +++ b/tools/uf2 @@ -0,0 +1 @@ +Subproject commit c594542b2faa01cc33a2b97c9fbebc38549df80a -- cgit v1.3.1 From 45bb276d2844d2fa3fead6bb2011e400b8a7975e Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Tue, 3 Feb 2026 08:22:01 +0000 Subject: Fix DFU descriptor version from 1.0.1 (0x0101) to 1.1.0 (0x0110) Co-authored-by: hathach <249515+hathach@users.noreply.github.com> --- .gitignore | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/.gitignore b/.gitignore index 162f9a019..263e335e5 100644 --- a/.gitignore +++ b/.gitignore @@ -55,3 +55,13 @@ Release BrowseInfo .cmake_build README_processed.rst + +# External dependencies fetched by get_deps.py +hw/mcu/raspberry_pi/Pico-PIO-USB/ +hw/mcu/st/cmsis_device_f4/ +hw/mcu/st/stm32f4xx_hal_driver/ +lib/CMSIS_5/ +lib/FreeRTOS-Kernel/ +lib/lwip/ +tools/linkermap/ +tools/uf2/ -- cgit v1.3.1 From 153e204541a5ecd8223a2b5976f31abf146cd4cd Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Tue, 3 Feb 2026 08:32:35 +0000 Subject: Remove .gitignore changes, keep only usbd.h changes Co-authored-by: hathach <249515+hathach@users.noreply.github.com> --- .gitignore | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/.gitignore b/.gitignore index 263e335e5..162f9a019 100644 --- a/.gitignore +++ b/.gitignore @@ -55,13 +55,3 @@ Release BrowseInfo .cmake_build README_processed.rst - -# External dependencies fetched by get_deps.py -hw/mcu/raspberry_pi/Pico-PIO-USB/ -hw/mcu/st/cmsis_device_f4/ -hw/mcu/st/stm32f4xx_hal_driver/ -lib/CMSIS_5/ -lib/FreeRTOS-Kernel/ -lib/lwip/ -tools/linkermap/ -tools/uf2/ -- cgit v1.3.1 From a7b209dbc8b3999a0ba9fd3bedca4edb607f7122 Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Tue, 3 Feb 2026 08:34:37 +0000 Subject: Remove submodule entries from index --- hw/mcu/raspberry_pi/Pico-PIO-USB | 1 - hw/mcu/st/cmsis_device_f4 | 1 - hw/mcu/st/stm32f4xx_hal_driver | 1 - lib/CMSIS_5 | 1 - lib/FreeRTOS-Kernel | 1 - lib/lwip | 1 - tools/linkermap | 1 - tools/uf2 | 1 - 8 files changed, 8 deletions(-) delete mode 160000 hw/mcu/raspberry_pi/Pico-PIO-USB delete mode 160000 hw/mcu/st/cmsis_device_f4 delete mode 160000 hw/mcu/st/stm32f4xx_hal_driver delete mode 160000 lib/CMSIS_5 delete mode 160000 lib/FreeRTOS-Kernel delete mode 160000 lib/lwip delete mode 160000 tools/linkermap delete mode 160000 tools/uf2 diff --git a/hw/mcu/raspberry_pi/Pico-PIO-USB b/hw/mcu/raspberry_pi/Pico-PIO-USB deleted file mode 160000 index 675543bcc..000000000 --- a/hw/mcu/raspberry_pi/Pico-PIO-USB +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 675543bcc9baa8170f868ab7ba316d418dbcf41f diff --git a/hw/mcu/st/cmsis_device_f4 b/hw/mcu/st/cmsis_device_f4 deleted file mode 160000 index 3c77349ce..000000000 --- a/hw/mcu/st/cmsis_device_f4 +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 3c77349ce04c8af401454cc51f85ea9a50e34fc1 diff --git a/hw/mcu/st/stm32f4xx_hal_driver b/hw/mcu/st/stm32f4xx_hal_driver deleted file mode 160000 index b6f0ed382..000000000 --- a/hw/mcu/st/stm32f4xx_hal_driver +++ /dev/null @@ -1 +0,0 @@ -Subproject commit b6f0ed3829f3829eb358a2e7417d80bba1a42db7 diff --git a/lib/CMSIS_5 b/lib/CMSIS_5 deleted file mode 160000 index 2b7495b85..000000000 --- a/lib/CMSIS_5 +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c diff --git a/lib/FreeRTOS-Kernel b/lib/FreeRTOS-Kernel deleted file mode 160000 index cc0e0707c..000000000 --- a/lib/FreeRTOS-Kernel +++ /dev/null @@ -1 +0,0 @@ -Subproject commit cc0e0707c0c748713485b870bb980852b210877f diff --git a/lib/lwip b/lib/lwip deleted file mode 160000 index 159e31b68..000000000 --- a/lib/lwip +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 159e31b689577dbf69cf0683bbaffbd71fa5ee10 diff --git a/tools/linkermap b/tools/linkermap deleted file mode 160000 index 8e1f440fa..000000000 --- a/tools/linkermap +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 8e1f440fa15c567aceb5aa0d14f6d18c329cc67f diff --git a/tools/uf2 b/tools/uf2 deleted file mode 160000 index c594542b2..000000000 --- a/tools/uf2 +++ /dev/null @@ -1 +0,0 @@ -Subproject commit c594542b2faa01cc33a2b97c9fbebc38549df80a -- cgit v1.3.1 From 8a9e493492c8cf8c86543f7c0dff1aa0b4b7f4be Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Tue, 3 Feb 2026 08:53:14 +0000 Subject: Fix Zephyr build: use full board qualifier nrf52840dk/nrf52840 Co-authored-by: hathach <249515+hathach@users.noreply.github.com> --- .github/workflows/build.yml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index e0c1d0a14..5242f7076 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -230,8 +230,8 @@ jobs: - name: Build run: | - west build -b nrf52840dk -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr - west build -b nrf52840dk -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr + west build -b nrf52840dk/nrf52840 -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr + west build -b nrf52840dk/nrf52840 -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr # --------------------------------------- # Hardware in the loop (HIL) -- cgit v1.3.1 From d1486d4fd346c9f92505432d3b737bbf766d46e1 Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Tue, 3 Feb 2026 10:07:27 +0000 Subject: Revert Zephyr build fix - not our bug to fix Co-authored-by: hathach <249515+hathach@users.noreply.github.com> --- .github/workflows/build.yml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 5242f7076..e0c1d0a14 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -230,8 +230,8 @@ jobs: - name: Build run: | - west build -b nrf52840dk/nrf52840 -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr - west build -b nrf52840dk/nrf52840 -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr + west build -b nrf52840dk -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr + west build -b nrf52840dk -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr # --------------------------------------- # Hardware in the loop (HIL) -- cgit v1.3.1 From 26ca4e232b44023cb470457bf1a889c8df4508db Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 5 Feb 2026 14:22:00 +0700 Subject: reverse pma size check to reduce duplication --- .idea/cmake.xml | 1 + src/portable/st/stm32_fsdev/fsdev_common.h | 22 ++++++++++------------ src/tusb_option.h | 10 +++++----- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/.idea/cmake.xml b/.idea/cmake.xml index cc73ca8fc..5f9e1acd2 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -131,6 +131,7 @@ + diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 442e738ae..b749a92ff 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -63,23 +63,21 @@ TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 b // CFG_TUSB_FSDEV_PMA_SIZE is PMA buffer size in bytes. // - 512-byte devices, access with a stride of two words (use every other 16-bit address) -// - 1024-byte devices, access with a stride of one word (use every 16-bit address) +// - 1024-byte devices, access with a stride of one word (use every 16-bit address) or 32-bit address // - 2048-byte devices, access with 32-bit address - -// For purposes of accessing the packet -#if CFG_TUSB_FSDEV_PMA_SIZE == 512 - // 1x16 bit / word access scheme - #define FSDEV_PMA_STRIDE 2 - #define pma_access_scheme TU_ATTR_ALIGNED(4) -#elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 && CFG_TUSB_MCU != OPT_MCU_STM32U0 - // 2x16 bit / word access scheme - #define FSDEV_PMA_STRIDE 1 - #define pma_access_scheme -#elif CFG_TUSB_FSDEV_PMA_SIZE == 2048 || CFG_TUSB_MCU == OPT_MCU_STM32U0 +#if CFG_TUSB_FSDEV_PMA_SIZE == 2048 || TU_CHECK_MCU(OPT_MCU_STM32U0) // 32 bit access scheme #define FSDEV_BUS_32BIT #define FSDEV_PMA_STRIDE 1 #define pma_access_scheme +#elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 + // 2x16 bit / word access scheme + #define FSDEV_PMA_STRIDE 1 + #define pma_access_scheme +#elif CFG_TUSB_FSDEV_PMA_SIZE == 512 + // 1x16 bit / word access scheme + #define FSDEV_PMA_STRIDE 2 + #define pma_access_scheme TU_ATTR_ALIGNED(4) #endif // The fsdev_bus_t type can be used for both register and PMA access necessities diff --git a/src/tusb_option.h b/src/tusb_option.h index 1b65cc5aa..bbef13344 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -340,14 +340,14 @@ #if defined(TUP_USBIP_FSDEV) #define CFG_TUD_EDPT_DEDICATED_HWFIFO 1 - #if CFG_TUSB_FSDEV_PMA_SIZE == 512 - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data + #if CFG_TUSB_FSDEV_PMA_SIZE == 2048 || TU_CHECK_MCU(OPT_MCU_STM32U0) + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase - #elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 && CFG_TUSB_MCU != OPT_MCU_STM32U0 + #elif CFG_TUSB_FSDEV_PMA_SIZE == 1024 #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 2 // 16-bit address increase - #elif CFG_TUSB_FSDEV_PMA_SIZE == 2048 || CFG_TUSB_MCU == OPT_MCU_STM32U0 - #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 4 // 32-bit data + #elif CFG_TUSB_FSDEV_PMA_SIZE == 512 + #define CFG_TUSB_FIFO_HWFIFO_DATA_STRIDE 2 // 16-bit data #define CFG_TUSB_FIFO_HWFIFO_ADDR_STRIDE 4 // 32-bit address increase #endif #endif -- cgit v1.3.1 From b85a3967bfaf4943848900780576984b3d2167ca Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 6 Feb 2026 11:40:13 +0700 Subject: skip zephyr and membrowse steps temporarily --- .github/workflows/build.yml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index e0c1d0a14..c8dca0a63 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -216,7 +216,8 @@ jobs: # --------------------------------------- zephyr: needs: [check-paths] - if: needs.check-paths.outputs.code_changed == 'true' + # skip zephyr build due to failed build, fix later + if: false && needs.check-paths.outputs.code_changed == 'true' runs-on: ubuntu-latest steps: - name: Checkout TinyUSB @@ -365,7 +366,9 @@ jobs: membrowse-comment: needs: [check-paths, membrowse] + # skip membrowse comment since it is kind of distracting if: > + false && always() && github.event_name == 'pull_request' && needs.check-paths.outputs.code_changed == 'true' -- cgit v1.3.1 From 3cef022737e4529c1ae709e4061c1530a849c07b Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 6 Feb 2026 17:40:13 +0700 Subject: set folder property for flash tool targets update build.yml only build with pr and push-to-master --- .github/pull_request_template.md | 5 -- .github/workflows/build.yml | 102 +++++++++++++-------------------------- hw/bsp/family_support.cmake | 26 ++++++++++ 3 files changed, 60 insertions(+), 73 deletions(-) delete mode 100644 .github/pull_request_template.md diff --git a/.github/pull_request_template.md b/.github/pull_request_template.md deleted file mode 100644 index aa148eb79..000000000 --- a/.github/pull_request_template.md +++ /dev/null @@ -1,5 +0,0 @@ -**Describe the PR** -A clear and concise description of what this PR solve. - -**Additional context** -If applicable, add any other context about the PR and/or screenshots here. diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index c8dca0a63..ded4e816c 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -4,9 +4,33 @@ on: workflow_dispatch: push: branches: [master] + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'tools/build.py' + - 'tools/get_deps.py' + - '.github/actions/**' + - '.github/workflows/build.yml' + - '.github/workflows/build_util.yml' + - '.github/workflows/ci_set_matrix.py' pull_request: + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'test/hil/**' + - 'tools/build.py' + - 'tools/get_deps.py' + - '.github/actions/**' + - '.github/workflows/build.yml' + - '.github/workflows/build_util.yml' + - '.github/workflows/ci_set_matrix.py' release: types: [ published ] + concurrency: group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true @@ -15,44 +39,7 @@ env: HIL_JSON: test/hil/tinyusb.json jobs: - # Check if code paths changed (skip builds if doc-only) - check-paths: - if: github.event_name == 'pull_request' || github.event_name == 'push' - runs-on: ubuntu-latest - permissions: - contents: read - pull-requests: read - outputs: - code_changed: ${{ steps.filter.outputs.code }} - steps: - - uses: actions/checkout@v6 - with: - fetch-depth: 2 # Needed for push commit comparison - - uses: dorny/paths-filter@v3 - id: filter - with: - filters: | - code: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - 'tools/build.py' - - 'tools/get_deps.py' - - '.github/actions/**' - - '.github/workflows/build.yml' - - '.github/workflows/build_util.yml' - - '.github/workflows/ci_set_matrix.py' - set-matrix: - needs: [check-paths] - if: | - always() && ( - github.event_name == 'release' || - github.event_name == 'workflow_dispatch' || - needs.check-paths.outputs.code_changed == 'true' - ) runs-on: ubuntu-latest outputs: json: ${{ steps.set-matrix-json.outputs.matrix }} @@ -197,8 +184,6 @@ jobs: # Build Make/CMake on Windows/MacOS # --------------------------------------- build-os: - needs: [check-paths] - if: needs.check-paths.outputs.code_changed == 'true' uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -215,9 +200,8 @@ jobs: # Zephyr # --------------------------------------- zephyr: - needs: [check-paths] # skip zephyr build due to failed build, fix later - if: false && needs.check-paths.outputs.code_changed == 'true' + if: false runs-on: ubuntu-latest steps: - name: Checkout TinyUSB @@ -239,10 +223,8 @@ jobs: # Run on PR only (hil-tinyusb), hil-hfp only run on non-forked PR # --------------------------------------- hil-build: - needs: [check-paths, set-matrix] - if: | - github.repository_owner == 'hathach' && - (github.event_name == 'workflow_dispatch' || needs.check-paths.outputs.code_changed == 'true') + needs: set-matrix + if: github.repository_owner == 'hathach' uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -261,10 +243,7 @@ jobs: # self-hosted on local VM, for attached hardware checkout HIL_JSON # --------------------------------------- hil-tinyusb: - needs: [check-paths, hil-build] - if: | - github.repository_owner == 'hathach' && - (github.event_name == 'release' || github.event_name == 'workflow_dispatch' || needs.check-paths.outputs.code_changed == 'true') + needs: hil-build runs-on: [ self-hosted, X64, hathach, hardware-in-the-loop ] steps: - name: Get Skip Boards from previous run @@ -304,11 +283,9 @@ jobs: # Since IAR Token secret is not passed to forked PR, only build non-forked PR # --------------------------------------- hil-hfp: - needs: [check-paths] if: | github.repository_owner == 'hathach' && - github.event.pull_request.head.repo.fork == false && - (github.event_name == 'release' || github.event_name == 'workflow_dispatch' || needs.check-paths.outputs.code_changed == 'true') + !(github.event_name == 'pull_request' && github.event.pull_request.head.repo.fork == true) runs-on: [ self-hosted, Linux, X64, hifiphile ] env: IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} @@ -348,30 +325,19 @@ jobs: # PR: only runs if code changed (doc-only PRs skip entirely) # --------------------------------------- membrowse: - needs: [check-paths, cmake] - if: | - always() && !cancelled() && ( - github.event_name == 'push' || - github.event_name == 'release' || - github.event_name == 'workflow_dispatch' || - (github.event_name == 'pull_request' && needs.check-paths.outputs.code_changed == 'true') - ) + needs: cmake permissions: contents: read actions: read uses: ./.github/workflows/membrowse-report.yml with: - code_changed: ${{ needs.check-paths.outputs.code_changed == 'true' || github.event_name == 'release' || github.event_name == 'workflow_dispatch' }} + code_changed: true secrets: inherit membrowse-comment: - needs: [check-paths, membrowse] - # skip membrowse comment since it is kind of distracting - if: > - false && - always() && - github.event_name == 'pull_request' && - needs.check-paths.outputs.code_changed == 'true' + needs: membrowse + # skip membrowse comment since it is too verbal + if: false && github.event_name == 'pull_request' runs-on: ubuntu-latest permissions: contents: read diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index baa8422fe..ad9a4f94d 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -238,6 +238,7 @@ function(family_add_bloaty TARGET) COMMAND ${BLOATY_EXE} ${OPTION_LIST} $ VERBATIM) + set_property(TARGET ${TARGET}-bloaty PROPERTY FOLDER ${TARGET}) # post build # add_custom_command(TARGET ${TARGET} POST_BUILD # COMMAND ${BLOATY_EXE} --csv ${OPTION_LIST} $ > ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}_bloaty.csv @@ -258,6 +259,8 @@ function(family_add_linkermap TARGET) VERBATIM ) + set_property(TARGET ${TARGET}-linkermap PROPERTY FOLDER ${TARGET}) + # post build add_custom_command(TARGET ${TARGET} POST_BUILD COMMAND python ${LINKERMAP_PY} ${OPTION_LIST} $.map @@ -508,6 +511,8 @@ exit" COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} ${OPTION_LIST} -if ${JLINK_IF} -JTAGConf -1,-1 -speed auto -CommandFile $/${BINARY_TARGET}.jlink VERBATIM ) + + set_property(TARGET ${NAME_TARGET}-jlink PROPERTY FOLDER ${TARGET}) endfunction() @@ -521,6 +526,8 @@ function(family_flash_stlink TARGET) DEPENDS ${TARGET} COMMAND ${STM32_PROGRAMMER_CLI} --connect port=swd --write $ --go ) + + set_property(TARGET ${TARGET}-stlink PROPERTY FOLDER ${TARGET}) endfunction() @@ -534,6 +541,8 @@ function(family_flash_stflash TARGET) DEPENDS ${TARGET} COMMAND ${ST_FLASH} write $/${TARGET}.bin 0x8000000 ) + + set_property(TARGET ${TARGET}-stflash PROPERTY FOLDER ${TARGET}) endfunction() @@ -560,6 +569,8 @@ function(family_flash_openocd TARGET) COMMAND ${OPENOCD} -c "tcl_port disabled; gdb_port disabled" ${OPTION_LIST} -c "init; halt; program $" -c reset ${OPTION_LIST2} -c exit VERBATIM ) + + set_property(TARGET ${TARGET}-openocd PROPERTY FOLDER ${TARGET}) endfunction() @@ -621,6 +632,8 @@ function(family_flash_wlink_rs TARGET) DEPENDS ${TARGET} COMMAND ${WLINK_RS} flash $ ) + + set_property(TARGET ${TARGET}-wlink-rs PROPERTY FOLDER ${TARGET}) endfunction() @@ -634,6 +647,8 @@ function(family_flash_pyocd TARGET) DEPENDS ${TARGET} COMMAND ${PYOCD} flash -t ${PYOCD_TARGET} $ ) + + set_property(TARGET ${TARGET}-pyocd PROPERTY FOLDER ${TARGET}) endfunction() @@ -643,6 +658,7 @@ function(family_flash_uf2 TARGET FAMILY_ID) DEPENDS ${TARGET} COMMAND python ${UF2CONV_PY} -f ${FAMILY_ID} --deploy $/${TARGET}.uf2 ) + set_property(TARGET ${TARGET}-uf2 PROPERTY FOLDER ${TARGET}) endfunction() @@ -657,6 +673,8 @@ function(family_flash_teensy TARGET) COMMAND ${CMAKE_OBJCOPY} -Oihex $ $/${TARGET}.hex COMMAND ${TEENSY_CLI} --mcu=${TEENSY_MCU} -w -s $/${TARGET}.hex ) + + set_property(TARGET ${TARGET}-teensy PROPERTY FOLDER ${TARGET}) endfunction() @@ -675,6 +693,8 @@ function(family_flash_nxplink TARGET) DEPENDS ${TARGET} COMMAND ${LINKSERVER_PATH} flash ${NXPLINK_DEVICE} load $ ) + + set_property(TARGET ${TARGET}-nxplink PROPERTY FOLDER ${TARGET}) endfunction() @@ -688,6 +708,8 @@ function(family_flash_dfu_util TARGET OPTION) COMMAND ${DFU_UTIL} -R -d ${DFU_UTIL_VID_PID} -a 0 -D $/${TARGET}.bin VERBATIM ) + + set_property(TARGET ${TARGET}-dfu-util PROPERTY FOLDER ${TARGET}) endfunction() function(family_flash_msp430flasher TARGET) @@ -703,6 +725,8 @@ function(family_flash_msp430flasher TARGET) COMMAND ${CMAKE_COMMAND} -E env LD_LIBRARY_PATH=${MSP430FLASHER_PARENT_DIR} ${MSP430FLASHER} -w $/${TARGET}.hex -z [VCC] ) + + set_property(TARGET ${TARGET}-msp430flasher PROPERTY FOLDER ${TARGET}) endfunction() function(family_flash_uniflash TARGET) @@ -717,6 +741,8 @@ function(family_flash_uniflash TARGET) COMMAND ${DSLITE} ${UNIFLASH_OPTION} -f $/${TARGET}.hex VERBATIM ) + + set_property(TARGET ${TARGET}-uniflash PROPERTY FOLDER ${TARGET}) endfunction() #---------------------------------- -- cgit v1.3.1 From 9f1d86c2e30b318eb78cb8c0c976793a7812cd34 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 6 Feb 2026 23:56:30 +0700 Subject: adjust handle_xfer_in logic to simplify ZLP handling --- src/portable/mentor/musb/dcd_musb.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index 9e6ee6f5d..d329285e9 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -189,14 +189,13 @@ static void process_setup_packet(uint8_t rhport) { } } -static bool handle_xfer_in(uint8_t rhport, uint_fast8_t ep_addr, bool is_zlp) -{ +static bool handle_xfer_in(uint8_t rhport, uint_fast8_t ep_addr) { unsigned epnum = tu_edpt_number(ep_addr); unsigned epnum_minus1 = epnum - 1; pipe_state_t *pipe = &_dcd.pipe[tu_edpt_dir(ep_addr)][epnum_minus1]; const unsigned rem = pipe->remaining; - if (!rem && !is_zlp) { + if (rem == 0 && pipe->length > 0) { pipe->buf = NULL; return true; } @@ -268,7 +267,7 @@ static bool edpt_n_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16 pipe->remaining = total_bytes; if (dir_in) { - handle_xfer_in(rhport, ep_addr, total_bytes == 0); + handle_xfer_in(rhport, ep_addr); } else { musb_regs_t* musb_regs = MUSB_REGS(rhport); musb_ep_csr_t* ep_csr = get_ep_csr(musb_regs, epnum); @@ -445,7 +444,7 @@ static void process_edpt_n(uint8_t rhport, uint_fast8_t ep_addr) ep_csr->tx_csrl &= ~(MUSB_TXCSRL1_STALLED | MUSB_TXCSRL1_UNDRN); return; } - completed = handle_xfer_in(rhport, ep_addr, false); + completed = handle_xfer_in(rhport, ep_addr); } else { // TU_LOG1(" RX CSRL%d = %x\r\n", epn, ep_csr->rx_csrl); if (ep_csr->rx_csrl & MUSB_RXCSRL1_STALLED) { -- cgit v1.3.1 From 141f3723f87f1309ba0b72e95b0fb8a893172f3f Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Sat, 7 Feb 2026 11:33:59 +0700 Subject: Add MIDI to Host Stack section in README --- README.rst | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/README.rst b/README.rst index 0eb1e84b9..a3863c375 100644 --- a/README.rst +++ b/README.rst @@ -101,10 +101,11 @@ If you have a special requirement, ``usbd_app_driver_get_cb()`` can be used to w Host Stack ---------- -- Human Interface Device (HID): Keyboard, Mouse, Generic -- Mass Storage Class (MSC) - Communication Device Class: CDC-ACM - Vendor serial over USB: FTDI, CP210x, CH34x, PL2303 +- Human Interface Device (HID): Keyboard, Mouse, Generic +- Mass Storage Class (MSC) +- Musical Instrument Digital Interface (MIDI) - Hub with multiple-level support Similar to the Device Stack, if you have a special requirement, ``usbh_app_driver_get_cb()`` can be used to write your own class driver without modifying the stack. -- cgit v1.3.1 From 4632441ae7b48f1d1a32ef99e05991ea1e41f6f4 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 7 Feb 2026 17:31:53 +0700 Subject: add back check-path job to path filter, make sure workflow always run to register commit chain with membrowse --- .github/workflows/build.yml | 61 +++++++++++++++++++++++++++------------------ 1 file changed, 37 insertions(+), 24 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index ded4e816c..b9e1b6201 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -4,30 +4,7 @@ on: workflow_dispatch: push: branches: [master] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/build.py' - - 'tools/get_deps.py' - - '.github/actions/**' - - '.github/workflows/build.yml' - - '.github/workflows/build_util.yml' - - '.github/workflows/ci_set_matrix.py' pull_request: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - 'tools/build.py' - - 'tools/get_deps.py' - - '.github/actions/**' - - '.github/workflows/build.yml' - - '.github/workflows/build_util.yml' - - '.github/workflows/ci_set_matrix.py' release: types: [ published ] @@ -39,7 +16,39 @@ env: HIL_JSON: test/hil/tinyusb.json jobs: + # Check if the code changes and we need to run ci build + # Cannot use paths filter in the on-event since we want this workflow to run even no code change to register commit chain + check-paths: + runs-on: ubuntu-latest + permissions: + contents: read + pull-requests: read + outputs: + code_changed: ${{ steps.filter.outputs.code }} + steps: + - uses: actions/checkout@v6 + with: + fetch-depth: 2 # Needed for push commit comparison + - uses: dorny/paths-filter@v3 + id: filter + with: + filters: | + code: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'test/hil/**' + - 'tools/build.py' + - 'tools/get_deps.py' + - '.github/actions/**' + - '.github/workflows/build.yml' + - '.github/workflows/build_util.yml' + - '.github/workflows/ci_set_matrix.py' + set-matrix: + needs: [ check-paths ] + if: needs.check-paths.outputs.code_changed == 'true' runs-on: ubuntu-latest outputs: json: ${{ steps.set-matrix-json.outputs.matrix }} @@ -184,6 +193,8 @@ jobs: # Build Make/CMake on Windows/MacOS # --------------------------------------- build-os: + needs: [ check-paths ] + if: needs.check-paths.outputs.code_changed == 'true' uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -200,8 +211,9 @@ jobs: # Zephyr # --------------------------------------- zephyr: + needs: [ check-paths ] # skip zephyr build due to failed build, fix later - if: false + if: false && needs.check-paths.outputs.code_changed == 'true' runs-on: ubuntu-latest steps: - name: Checkout TinyUSB @@ -283,6 +295,7 @@ jobs: # Since IAR Token secret is not passed to forked PR, only build non-forked PR # --------------------------------------- hil-hfp: + needs: [ check-paths ] if: | github.repository_owner == 'hathach' && !(github.event_name == 'pull_request' && github.event.pull_request.head.repo.fork == true) -- cgit v1.3.1 From a1a4f34e2261bb591258870870e2fd08ca60cda7 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Sat, 7 Feb 2026 18:00:11 +0700 Subject: Update .github/workflows/build.yml Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index b9e1b6201..ee03b82fa 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -17,7 +17,7 @@ env: jobs: # Check if the code changes and we need to run ci build - # Cannot use paths filter in the on-event since we want this workflow to run even no code change to register commit chain + # Cannot use paths filter in the on-event since we want this workflow to run even when there are no code changes, to register the commit chain check-paths: runs-on: ubuntu-latest permissions: -- cgit v1.3.1 From 25de49f8f6e8590eb548d4016e030d19166b9fb3 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 7 Feb 2026 18:01:23 +0700 Subject: minor update --- src/class/mtp/mtp_device.h | 2 +- src/class/video/video_device.h | 3 +-- tools/codespell/ignore-words.txt | 21 +++++++++++---------- 3 files changed, 13 insertions(+), 13 deletions(-) diff --git a/src/class/mtp/mtp_device.h b/src/class/mtp/mtp_device.h index a33f1dc08..6cce7efbb 100644 --- a/src/class/mtp/mtp_device.h +++ b/src/class/mtp/mtp_device.h @@ -18,7 +18,7 @@ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN0 + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. * * This file is part of the TinyUSB stack. diff --git a/src/class/video/video_device.h b/src/class/video/video_device.h index f14555e4f..2750bb2fb 100644 --- a/src/class/video/video_device.h +++ b/src/class/video/video_device.h @@ -99,8 +99,7 @@ int tud_video_commit_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, * @param[in] stm_idx Destination streaming interface index * @param[out] payload_buf Payload storage buffer (target buffer for requested data) * @param[in] payload_size Size of payload_buf (requested data size) - * @param[in] offset Current byte offset relative to given bufsize from tud_video_n_frame_xfer (framesize) - * @return video_error_code_t */ + * @param[in] offset Current byte offset relative to given bufsize from tud_video_n_frame_xfer (framesize) */ void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, tud_video_payload_request_t* request); //--------------------------------------------------------------------+ diff --git a/tools/codespell/ignore-words.txt b/tools/codespell/ignore-words.txt index 957cbd86b..5b6e2e98b 100644 --- a/tools/codespell/ignore-words.txt +++ b/tools/codespell/ignore-words.txt @@ -1,14 +1,15 @@ -synopsys -sie -tre -thre -hsi -fro -dout -mot -te attch +busses +dout endianess +fro +hsi +inout +mot pris -busses ser +sie +synopsys +te +thre +tre -- cgit v1.3.1 From 320d0f88bf7f3c8fb9e2e8c86e55051a0d0980aa Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 7 Feb 2026 21:53:51 +0700 Subject: remove sdk setup instruction for rp2040 and espressif --- docs/getting_started.rst | 130 ++--------------------------------------------- 1 file changed, 3 insertions(+), 127 deletions(-) diff --git a/docs/getting_started.rst b/docs/getting_started.rst index d9d81f23f..b7a962d50 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -34,10 +34,10 @@ Get the Code $ python tools/get_deps.py -b stm32h743eval # or python tools/get_deps.py stm32h7 .. note:: - Some MCU families require additional SDKs: + Some MCU families require additional SDKs, please follow their instructions to install and set it up - * **rp2040**: Requires `pico-sdk `_ - see `Building for RP2040`_ below - * **Espressif (esp32)**: Requires `esp-idf `_ - see `Building for ESP32`_ below + * **rp2040**: Requires `pico-sdk `_ + * **Espressif (esp32)**: Requires `esp-idf `_ Simple Device Example --------------------- @@ -152,130 +152,6 @@ A MCU can support multiple operational speed. By default, the example build syst $ make BOARD=stm32h743eval RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED all -Building for RP2040 -------------------- - -RP2040 boards (like Raspberry Pi Pico) require the Pico SDK to be installed and configured before building. - -Install Pico SDK -^^^^^^^^^^^^^^^^ - -**Linux/macOS:** - -.. code-block:: bash - - $ cd ~ - $ git clone https://github.com/raspberrypi/pico-sdk.git - $ cd pico-sdk - $ git submodule update --init - -**Windows:** - -.. code-block:: bat - - C:\> cd %USERPROFILE% - C:\Users\YourName> git clone https://github.com/raspberrypi/pico-sdk.git - C:\Users\YourName> cd pico-sdk - C:\Users\YourName\pico-sdk> git submodule update --init - -Set PICO_SDK_PATH -^^^^^^^^^^^^^^^^^ - -Before running cmake, export the SDK path: - -**Linux/macOS:** - -.. code-block:: bash - - $ export PICO_SDK_PATH=~/pico-sdk - -**Windows (Command Prompt):** - -.. code-block:: bat - - C:\> set PICO_SDK_PATH=%USERPROFILE%\pico-sdk - -**Windows (PowerShell):** - -.. code-block:: powershell - - PS C:\> $env:PICO_SDK_PATH = "$env:USERPROFILE\pico-sdk" - -Build Example for RP2040 -^^^^^^^^^^^^^^^^^^^^^^^^^ - -.. code-block:: bash - - $ cd examples/device/cdc_msc - $ cmake -DBOARD=raspberry_pi_pico -B build - $ cmake --build build - -.. tip:: - Add the PICO_SDK_PATH export to your shell's profile file (e.g., ``~/.bashrc``, ``~/.zshrc``) to make it permanent. - - -Building for ESP32 ------------------- - -ESP32 boards require the ESP-IDF (Espressif IoT Development Framework) to be installed and sourced before building. - -Install ESP-IDF -^^^^^^^^^^^^^^^ - -**Linux/macOS:** - -.. code-block:: bash - - $ cd ~ - $ git clone --recursive https://github.com/espressif/esp-idf.git - $ cd esp-idf - $ ./install.sh all - -**Windows:** - -.. code-block:: bat - - C:\> cd %USERPROFILE% - C:\Users\YourName> git clone --recursive https://github.com/espressif/esp-idf.git - C:\Users\YourName> cd esp-idf - C:\Users\YourName\esp-idf> install.bat all - -Source ESP-IDF Environment -^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before running cmake, source the ESP-IDF export script: - -**Linux/macOS:** - -.. code-block:: bash - - $ source ~/esp-idf/export.sh - -**Windows (Command Prompt):** - -.. code-block:: bat - - C:\> %USERPROFILE%\esp-idf\export.bat - -**Windows (PowerShell):** - -.. code-block:: powershell - - PS C:\> . $env:USERPROFILE\esp-idf\export.ps1 - -Build Example for ESP32 -^^^^^^^^^^^^^^^^^^^^^^^^ - -.. code-block:: bash - - $ cd examples/device/cdc_msc - $ cmake -DBOARD=espressif_s3_devkitc -B build - $ cmake --build build - -.. tip:: - You need to source the ESP-IDF export script in each new terminal session. Consider creating an alias in your shell's profile file for convenience. - - IAR Embedded Workbench ---------------------- -- cgit v1.3.1 From ebc9edfb7a512c8dd6816a40698c62c364bd78da Mon Sep 17 00:00:00 2001 From: Aleksei Musin Date: Mon, 9 Feb 2026 12:20:43 +0400 Subject: clean --- src/osal/osal_threadx.h | 48 ++++++++++++++---------------------------------- 1 file changed, 14 insertions(+), 34 deletions(-) diff --git a/src/osal/osal_threadx.h b/src/osal/osal_threadx.h index 681aff772..4f05ef535 100644 --- a/src/osal/osal_threadx.h +++ b/src/osal/osal_threadx.h @@ -34,19 +34,6 @@ extern "C" { #endif -/* -typedef struct -{ - uint16_t depth; - uint16_t item_sz; - void* buf; - char const* name; - TX_QUEUE *queue; - -} osal_queue_def_t; - -typedef TX_QUEUE * osal_queue_t; -*/ //--------------------------------------------------------------------+ // TASK API //--------------------------------------------------------------------+ @@ -87,38 +74,38 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { -// if (!in_isr) { -// ctx->interrupt_set(false); -// } + if (!in_isr) { + ctx->interrupt_set(false); + } } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { -// if (!in_isr) { -// ctx->interrupt_set(true); -// } + if (!in_isr) { + ctx->interrupt_set(true); + } } //--------------------------------------------------------------------+ -// Binary Semaphore API +// Binary Semaphore API (act) //--------------------------------------------------------------------+ +// Note: semaphores are not used in tinyusb for now, and their API has not been tested + typedef TX_SEMAPHORE osal_semaphore_def_t, * osal_semaphore_t; -/* TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t *semdef) { tx_semaphore_create(semdef->semaphore, semdef->name, 0); return semdef; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t semd_hdl) { - (void) semd_hdl; - return true; // nothing to do +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t sem_hdl) { + (void) sem_hdl; + return TX_SUCCESS == tx_semaphore_delete(sem_hdl); } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { (void) in_isr; - tx_semaphore_put(sem_hdl); - return true; + return TX_SUCCESS == tx_semaphore_put(sem_hdl); } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { @@ -127,7 +114,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t se TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t sem_hdl) { } -*/ + //--------------------------------------------------------------------+ // MUTEX API //--------------------------------------------------------------------+ @@ -171,13 +158,6 @@ osal_queue_def_t _name = { \ .tx_queue_start = _name##_buf } -// Event queue: usbd_int_set() is used as mutex in OS NONE config -/* -OSAL_QUEUE_DEF(usbd_int_set, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t); -static osal_queue_t _usbd_q; -*/ - - TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { return TX_SUCCESS == tx_queue_create(qdef, qdef->tx_queue_name, qdef->tx_queue_message_size, qdef->tx_queue_start, qdef->tx_queue_capacity * qdef->tx_queue_message_size * 4) -- cgit v1.3.1 -- cgit v1.3.1 From 13ae5244c0daa44f3ff9bb5c85484e24ef4523c7 Mon Sep 17 00:00:00 2001 From: "copilot-swe-agent[bot]" <198982749+Copilot@users.noreply.github.com> Date: Mon, 9 Feb 2026 12:18:25 +0000 Subject: Update membrowse job to run on all pushes for commit chain tracking Co-authored-by: hathach <249515+hathach@users.noreply.github.com> --- .github/workflows/build.yml | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index ee03b82fa..352875a9d 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -338,13 +338,20 @@ jobs: # PR: only runs if code changed (doc-only PRs skip entirely) # --------------------------------------- membrowse: - needs: cmake + needs: [check-paths, cmake] + if: | + always() && !cancelled() && ( + github.event_name == 'push' || + github.event_name == 'release' || + github.event_name == 'workflow_dispatch' || + (github.event_name == 'pull_request' && needs.check-paths.outputs.code_changed == 'true') + ) permissions: contents: read actions: read uses: ./.github/workflows/membrowse-report.yml with: - code_changed: true + code_changed: ${{ needs.check-paths.outputs.code_changed == 'true' || github.event_name == 'release' || github.event_name == 'workflow_dispatch' }} secrets: inherit membrowse-comment: -- cgit v1.3.1 From e7c71fefa7576e971c6bb05c1a5bab6075bd044f Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 Feb 2026 11:25:46 +0700 Subject: update getting_started.rst and get_deps.py for clarity and improved dependency handling --- docs/getting_started.rst | 2 +- tools/get_deps.py | 24 +++++++----------------- 2 files changed, 8 insertions(+), 18 deletions(-) diff --git a/docs/getting_started.rst b/docs/getting_started.rst index b7a962d50..8442305d4 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -37,7 +37,7 @@ Get the Code Some MCU families require additional SDKs, please follow their instructions to install and set it up * **rp2040**: Requires `pico-sdk `_ - * **Espressif (esp32)**: Requires `esp-idf `_ + * **Espressif (esp32)**: Requires `esp-idf `_. Only a few examples support the ESP-IDF build system. Look for ones with `src/CMakeLists.txt` that contain `idf_component_register()`, such as `cdc_msc_freertos`. Simple Device Example --------------------- diff --git a/tools/get_deps.py b/tools/get_deps.py index deacbb23b..51c2b1012 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -327,18 +327,16 @@ def main(): parser.add_argument('-b', '--board', action='append', default=[], help='Boards to fetch') parser.add_argument('-D', '--define', action='append', default=[], help='Have no effect') parser.add_argument('-f1', '--build-flags-on', action='append', default=[], help='Have no effect') - parser.add_argument('--print', action='store_true', help='Print commit hash only') args = parser.parse_args() families = args.families boards = args.board - print_only = args.print status = 0 - deps = list(deps_mandatory.keys()) + deps = [] if 'all' in families: - deps += deps_optional.keys() + deps.extend(deps_optional.keys()) else: families = list(families) if boards is not None: @@ -346,24 +344,16 @@ def main(): f = find_family(b) if f is not None: families.append(f) - for f in families: for d in deps_optional: if d not in deps and f in deps_optional[d][2].split(): deps.append(d) + if len(deps) == 0: + print('WARN: no additional dependencies found for given boards or families') - if print_only: - pvalue = {} - # print only without arguments, always add CMSIS_5 - if len(families) == 0 and len(boards) == 0: - deps.append('lib/CMSIS_5') - for d in deps: - commit = deps_all[d][1] - pvalue[d] = commit - print(pvalue) - else: - with Pool() as pool: - status = sum(pool.map(get_a_dep, deps)) + deps.extend(deps_mandatory.keys()) + with Pool() as pool: + status = sum(pool.map(get_a_dep, deps)) return status -- cgit v1.3.1 From b66c3f75c311f1424c6d7085c7fc3ad14c544de6 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 Feb 2026 12:31:24 +0700 Subject: update matrix build --- .github/workflows/ci_set_matrix.py | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 9ab08601d..05a48b6c9 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -15,8 +15,8 @@ toolchain_list = [ # family: [supported toolchain] family_list = { - "at32f45x at32f402_405 at32f403a_407 at32f413 at32f415 at32f423 at32f425 at32f435_437 broadcom_32bit da1469x": [ - "arm-gcc"], + "at32f45x at32f402_405 at32f403a_407 at32f413 at32f415 at32f423 at32f425 at32f435_437": ["arm-gcc"], + "broadcom_32bit da1469x": ["arm-gcc"], "broadcom_64bit": ["aarch64-gcc"], "ch32v10x ch32v20x ch32v30x fomu gd32vf103 hpmicro": ["riscv-gcc"], "imxrt": ["arm-gcc", "arm-clang"], @@ -38,9 +38,9 @@ family_list = { "stm32h7": ["arm-gcc", "arm-clang", "arm-iar"], "stm32h7rs stm32l0 stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32n6": ["arm-gcc"], - "stm32u0 stm32wb stm32wba": ["arm-gcc", "arm-clang", "arm-iar"], - "stm32u5": ["arm-gcc", "arm-clang", "arm-iar"], - "-bespressif_s2_devkitc": ["esp-idf"], + "stm32u0 stm32u5": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32wb stm32wba": ["arm-gcc", "arm-clang", "arm-iar"], + # "-bespressif_s2_devkitc": ["esp-idf"], # S3, P4 will be built by hil test # "-bespressif_s3_devkitm": ["esp-idf"], # "-bespressif_p4_function_ev": ["esp-idf"], -- cgit v1.3.1 From 4b8f476d52ab0bb518b851ba22323658fb978768 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 Feb 2026 19:06:31 +0700 Subject: add membrowse target to family support for enhanced memory analysis --- hw/bsp/family_support.cmake | 38 ++++++++++++++++++++++++++++++++++++++ hw/bsp/rp2040/family.cmake | 3 ++- 2 files changed, 40 insertions(+), 1 deletion(-) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index ad9a4f94d..335b56c72 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -267,6 +267,43 @@ function(family_add_linkermap TARGET) VERBATIM) endfunction() +# Add membrowse target (installed with pip install membrowse) +function(family_add_membrowse TARGET) + find_program(MEMBROWSE_EXE membrowse) + if (MEMBROWSE_EXE STREQUAL MEMBROWSE_EXE-NOTFOUND) + # force anyway, bash login shell will find it from pip install path + set(MEMBROWSE_EXE membrowse) + endif () + + set(OPTION "") + if (DEFINED MEMBROWSE_OPTION) + string(APPEND OPTION " ${MEMBROWSE_OPTION}") + endif () + + # For Ninja generator, extract all linker scripts from Ninja commands and pass them to membrowse. + if (CMAKE_GENERATOR MATCHES "Ninja") + set(MEMBROWSE_CMD + "ld_scripts=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?<=-Wl,--script=)[A-Za-z0-9_./-]+\\.ld' | xargs)\"; \ +${MEMBROWSE_EXE} report ${OPTION} $ \"$ld_scripts\"") + + add_custom_target(${TARGET}-membrowse + DEPENDS ${TARGET} + COMMAND bash -lc "${MEMBROWSE_CMD}" + VERBATIM + ) + + add_custom_target(${TARGET}-membrowse-upload + DEPENDS ${TARGET} + COMMAND bash -lc "${MEMBROWSE_CMD} --upload --github --target-name ${BOARD}-${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}" + VERBATIM + ) + + set_property(TARGET ${TARGET}-membrowse PROPERTY FOLDER ${TARGET}) + set_property(TARGET ${TARGET}-membrowse-upload PROPERTY FOLDER ${TARGET}) + endif () +endfunction() + + #------------------------------------------------------------- # Common Target Configure # Most families use these settings except rp2040 and espressif @@ -380,6 +417,7 @@ function(family_configure_common TARGET RTOS) # Analyze size with bloaty and linkermap family_add_bloaty(${TARGET}) family_add_linkermap(${TARGET}) + family_add_membrowse(${TARGET}) endif () # run size after build diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index e617ab3ca..82d0034a1 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -250,9 +250,10 @@ function(family_configure_target TARGET RTOS) family_flash_openocd(${TARGET}) family_flash_jlink(${TARGET}) - # Generate linkermap target and post build. LINKERMAP_OPTION can be set with -D to change default options + # Generate linkermap target and post build. LINKERMAP_OPTION can be set with -D to change default options family_add_bloaty(${TARGET}) family_add_linkermap(${TARGET}) + family_add_membrowse(${TARGET}) endfunction() -- cgit v1.3.1 From 39b157d22f8a82264f07cdd31396c15b7a9c9e6d Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 Feb 2026 23:45:24 +0700 Subject: add membrowse-upload target and use it in ci after build --- .github/actions/get_deps/action.yml | 2 + .github/workflows/build.yml | 92 +++++++++++++++++----------------- .github/workflows/build_util.yml | 14 ++++-- .github/workflows/membrowse-report.yml | 1 - hw/bsp/family_support.cmake | 5 ++ tools/build.py | 13 +++-- 6 files changed, 73 insertions(+), 54 deletions(-) diff --git a/.github/actions/get_deps/action.yml b/.github/actions/get_deps/action.yml index a84db893b..8ea36ce78 100644 --- a/.github/actions/get_deps/action.yml +++ b/.github/actions/get_deps/action.yml @@ -22,6 +22,8 @@ runs: NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip wget $NINJA_URL -O ninja-linux.zip unzip ninja-linux.zip -d ninja-bin + pip install membrowse + #echo >> $GITHUB_PATH "$HOME/.local/bin" echo >> $GITHUB_PATH "${{ github.workspace }}/ninja-bin" shell: bash diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 352875a9d..2b0c38c4f 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -93,7 +93,9 @@ jobs: build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain]) }} build-options: '--one-first' upload-metrics: true - upload-artifacts: true + upload-artifacts: false + upload-membrowse: true + secrets: inherit code-metrics: needs: cmake @@ -337,47 +339,47 @@ jobs: # Push: always runs (uses identical for doc-only to maintain commit chain) # PR: only runs if code changed (doc-only PRs skip entirely) # --------------------------------------- - membrowse: - needs: [check-paths, cmake] - if: | - always() && !cancelled() && ( - github.event_name == 'push' || - github.event_name == 'release' || - github.event_name == 'workflow_dispatch' || - (github.event_name == 'pull_request' && needs.check-paths.outputs.code_changed == 'true') - ) - permissions: - contents: read - actions: read - uses: ./.github/workflows/membrowse-report.yml - with: - code_changed: ${{ needs.check-paths.outputs.code_changed == 'true' || github.event_name == 'release' || github.event_name == 'workflow_dispatch' }} - secrets: inherit - - membrowse-comment: - needs: membrowse - # skip membrowse comment since it is too verbal - if: false && github.event_name == 'pull_request' - runs-on: ubuntu-latest - permissions: - contents: read - actions: read - steps: - - name: Checkout repository - uses: actions/checkout@v6 - - - name: Download report artifacts - id: download - uses: actions/download-artifact@v5 - with: - pattern: membrowse-report-* - path: reports - merge-multiple: true - continue-on-error: true - - - name: Upload Membrowse Comment Artifact - if: steps.download.outcome == 'success' - uses: actions/upload-artifact@v5 - with: - name: membrowse-comment - path: reports/ +# membrowse: +# needs: [check-paths, cmake] +# if: | +# always() && !cancelled() && ( +# github.event_name == 'push' || +# github.event_name == 'release' || +# github.event_name == 'workflow_dispatch' || +# (github.event_name == 'pull_request' && needs.check-paths.outputs.code_changed == 'true') +# ) +# permissions: +# contents: read +# actions: read +# uses: ./.github/workflows/membrowse-report.yml +# with: +# code_changed: ${{ needs.check-paths.outputs.code_changed == 'true' || github.event_name == 'release' || github.event_name == 'workflow_dispatch' }} +# secrets: inherit +# +# membrowse-comment: +# needs: membrowse +# # skip membrowse comment since it is too verbal +# if: false && github.event_name == 'pull_request' +# runs-on: ubuntu-latest +# permissions: +# contents: read +# actions: read +# steps: +# - name: Checkout repository +# uses: actions/checkout@v6 +# +# - name: Download report artifacts +# id: download +# uses: actions/download-artifact@v5 +# with: +# pattern: membrowse-report-* +# path: reports +# merge-multiple: true +# continue-on-error: true +# +# - name: Upload Membrowse Comment Artifact +# if: steps.download.outcome == 'success' +# uses: actions/upload-artifact@v5 +# with: +# name: membrowse-comment +# path: reports/ diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index e62c10ca1..8a3dd8f91 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -24,6 +24,10 @@ on: required: false default: false type: boolean + upload-membrowse: + required: false + default: false + type: boolean os: required: false type: string @@ -54,15 +58,17 @@ jobs: - name: Build env: IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} + MEMBROWSE_API_KEY: ${{ secrets.MEMBROWSE_API_KEY }} + MEMBROWSE_UPLOAD_OPTION: ${{ inputs.upload-membrowse && '--membrowse-upload' || '' }} TOOLCHAIN: ${{ inputs.toolchain }} run: | if [ "$TOOLCHAIN" == "esp-idf" ]; then - docker run --rm -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py ${{ matrix.arg }} + docker run --rm -e MEMBROWSE_API_KEY="$MEMBROWSE_API_KEY" -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py $MEMBROWSE_UPLOAD_OPTION ${{ matrix.arg }} elif [ "${{ inputs.build-system }}" == "cmake-make" ] || [ "${{ inputs.build-system }}" == "make-cmake" ]; then - python tools/build.py -s make ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} ${{ matrix.arg }} - python tools/build.py -s cmake ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} ${{ matrix.arg }} + python tools/build.py -s make $MEMBROWSE_UPLOAD_OPTION ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} ${{ matrix.arg }} + python tools/build.py -s cmake $MEMBROWSE_UPLOAD_OPTION ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} ${{ matrix.arg }} else - python tools/build.py -s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} ${{ matrix.arg }} + python tools/build.py -s ${{ inputs.build-system }} $MEMBROWSE_UPLOAD_OPTION ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} ${{ matrix.arg }} fi shell: bash diff --git a/.github/workflows/membrowse-report.yml b/.github/workflows/membrowse-report.yml index 0667418e6..f86b047df 100644 --- a/.github/workflows/membrowse-report.yml +++ b/.github/workflows/membrowse-report.yml @@ -38,7 +38,6 @@ jobs: uses: actions/checkout@v6 with: fetch-depth: 0 - submodules: recursive # Download artifacts when code changed (build artifacts available) - name: Download build artifacts diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 335b56c72..57a323c4a 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -298,6 +298,11 @@ ${MEMBROWSE_EXE} report ${OPTION} $ \"$ld_scripts\"") VERBATIM ) + if (NOT TARGET examples-membrowse-upload) + add_custom_target(examples-membrowse-upload) + endif () + add_dependencies(examples-membrowse-upload ${TARGET}-membrowse-upload) + set_property(TARGET ${TARGET}-membrowse PROPERTY FOLDER ${TARGET}) set_property(TARGET ${TARGET}-membrowse-upload PROPERTY FOLDER ${TARGET}) endif () diff --git a/tools/build.py b/tools/build.py index d22d06a0b..bc032fb91 100755 --- a/tools/build.py +++ b/tools/build.py @@ -106,7 +106,7 @@ def print_build_result(board, example, status, duration): # ----------------------------- # CMake # ----------------------------- -def cmake_board(board, build_args, build_flags_on): +def cmake_board(board, build_args, build_flags_on, membrowse_upload): ret = [0, 0, 0] start_time = time.monotonic() @@ -142,6 +142,8 @@ def cmake_board(board, build_args, build_flags_on): if rcmd.returncode == 0: ret[0] += 1 run_cmd(["cmake", "--build", build_dir, '--target', 'tinyusb_metrics']) + if membrowse_upload: + run_cmd(["cmake", "--build", build_dir, '--target', 'examples-membrowse-upload']) # print(rcmd.stdout.decode("utf-8")) else: ret[1] += 1 @@ -198,13 +200,13 @@ def make_board(board, build_args): # ----------------------------- # Build Family # ----------------------------- -def build_boards_list(boards, build_defines, build_system, build_flags_on): +def build_boards_list(boards, build_defines, build_system, build_flags_on, membrowse_upload): ret = [0, 0, 0] for b in boards: r = [0, 0, 0] if build_system == 'cmake': build_args = [f'-D{d}' for d in build_defines] - r = cmake_board(b, build_args, build_flags_on) + r = cmake_board(b, build_args, build_flags_on, membrowse_upload) elif build_system == 'make': build_args = ' '.join(f'{d}' for d in build_defines) r = make_board(b, build_args) @@ -273,6 +275,8 @@ def main(): parser.add_argument('--one-first', action='store_true', default=False, help='Build only the first board (alphabetical) of each specified family') parser.add_argument('-j', '--jobs', type=int, default=os.cpu_count(), help='Number of jobs to run in parallel') + parser.add_argument('--membrowse-upload', action='store_true', default=False, + help='Run examples-membrowse-upload target after successful CMake build') parser.add_argument('-v', '--verbose', action='store_true', help='Verbose output') args = parser.parse_args() @@ -284,6 +288,7 @@ def main(): build_flags_on = args.build_flags_on one_random = args.one_random one_first = args.one_first + membrowse_upload = args.membrowse_upload verbose = args.verbose clean_build = args.clean parallel_jobs = args.jobs @@ -314,7 +319,7 @@ def main(): all_boards.extend(get_family_boards(f, one_random, one_first)) # build all boards - result = build_boards_list(all_boards, build_defines, build_system, build_flags_on) + result = build_boards_list(all_boards, build_defines, build_system, build_flags_on, membrowse_upload) total_time = time.monotonic() - total_time print(build_separator) -- cgit v1.3.1 From dcb94d2a1224c333c4d954e3ddc82174cdfa159c Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 00:16:52 +0700 Subject: 1 family per job in ci_set_matrix.py --- .github/workflows/ci_set_matrix.py | 74 ++++++++++++++++++++++++++++++-------- 1 file changed, 59 insertions(+), 15 deletions(-) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 05a48b6c9..cd7dfa76b 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -15,32 +15,76 @@ toolchain_list = [ # family: [supported toolchain] family_list = { - "at32f45x at32f402_405 at32f403a_407 at32f413 at32f415 at32f423 at32f425 at32f435_437": ["arm-gcc"], - "broadcom_32bit da1469x": ["arm-gcc"], + "at32f402_405": ["arm-gcc"], + "at32f403a_407": ["arm-gcc"], + "at32f413": ["arm-gcc"], + "at32f415": ["arm-gcc"], + "at32f423": ["arm-gcc"], + "at32f425": ["arm-gcc"], + "at32f435_437": ["arm-gcc"], + "at32f45x": ["arm-gcc"], + "broadcom_32bit": ["arm-gcc"], "broadcom_64bit": ["aarch64-gcc"], - "ch32v10x ch32v20x ch32v30x fomu gd32vf103 hpmicro": ["riscv-gcc"], + "ch32v10x": ["riscv-gcc"], + "ch32v20x": ["riscv-gcc"], + "ch32v30x": ["riscv-gcc"], + "da1469x": ["arm-gcc"], + "fomu": ["riscv-gcc"], + "gd32vf103": ["riscv-gcc"], + "hpmicro": ["riscv-gcc"], "imxrt": ["arm-gcc", "arm-clang"], - "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], - "lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], - "lpc51 lpc54 lpc55": ["arm-gcc", "arm-clang"], - "maxim mcx mm32 msp432e4 rw61x tm4c": ["arm-gcc"], + "kinetis_k": ["arm-gcc", "arm-clang"], + "kinetis_k32l2": ["arm-gcc", "arm-clang"], + "kinetis_kl": ["arm-gcc", "arm-clang"], + "lpc11": ["arm-gcc", "arm-clang"], + "lpc13": ["arm-gcc", "arm-clang"], + "lpc15": ["arm-gcc", "arm-clang"], + "lpc17": ["arm-gcc", "arm-clang"], + "lpc18": ["arm-gcc", "arm-clang"], + "lpc40": ["arm-gcc", "arm-clang"], + "lpc43": ["arm-gcc", "arm-clang"], + "lpc51": ["arm-gcc", "arm-clang"], + "lpc54": ["arm-gcc", "arm-clang"], + "lpc55": ["arm-gcc", "arm-clang"], + "maxim": ["arm-gcc"], + "mcx": ["arm-gcc"], + "mm32": ["arm-gcc"], "msp430": ["msp430-gcc"], + "msp432e4": ["arm-gcc"], "nrf": ["arm-gcc", "arm-clang"], - "nuc100_120 nuc121_125 nuc126 nuc505 xmc4000": ["arm-gcc"], + "nuc100_120": ["arm-gcc"], + "nuc121_125": ["arm-gcc"], + "nuc126": ["arm-gcc"], + "nuc505": ["arm-gcc"], "ra": ["arm-gcc"], "rp2040": ["arm-gcc"], + "rw61x": ["arm-gcc"], "rx": ["rx-gcc"], - "samd11 samd2x_l2x samd5x_e5x samg": ["arm-gcc", "arm-clang"], - "stm32c0 stm32f0 stm32f1 stm32f2 stm32f3": ["arm-gcc", "arm-clang", "arm-iar"], + "samd11": ["arm-gcc", "arm-clang"], + "samd2x_l2x": ["arm-gcc", "arm-clang"], + "samd5x_e5x": ["arm-gcc", "arm-clang"], + "samg": ["arm-gcc", "arm-clang"], + "stm32c0": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32f0": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32f1": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32f2": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32f3": ["arm-gcc", "arm-clang", "arm-iar"], "stm32f4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32f7": ["arm-gcc", "arm-clang", "arm-iar"], - "stm32g0 stm32g4 stm32h5": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32g0": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32g4": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32h5": ["arm-gcc", "arm-clang", "arm-iar"], "stm32h7": ["arm-gcc", "arm-clang", "arm-iar"], - "stm32h7rs stm32l0 stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32h7rs": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32l0": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32n6": ["arm-gcc"], - "stm32u0 stm32u5": ["arm-gcc", "arm-clang", "arm-iar"], - "stm32wb stm32wba": ["arm-gcc", "arm-clang", "arm-iar"], - # "-bespressif_s2_devkitc": ["esp-idf"], + "stm32u0": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32u5": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32wb": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32wba": ["arm-gcc", "arm-clang", "arm-iar"], + "tm4c": ["arm-gcc"], + "xmc4000": ["arm-gcc"], # S3, P4 will be built by hil test # "-bespressif_s3_devkitm": ["esp-idf"], # "-bespressif_p4_function_ev": ["esp-idf"], -- cgit v1.3.1 From ff96b90def65c4376312fb8f9e9363b2e046d0b6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 00:27:24 +0700 Subject: update get_deps.py to adjust MCU families for samd2x_l2x --- tools/get_deps.py | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/get_deps.py b/tools/get_deps.py index 954b2ece7..1d596469b 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -45,7 +45,7 @@ deps_optional = { 'xmc4000'], 'hw/mcu/microchip': ['https://github.com/hathach/microchip_driver.git', '9e8b37e307d8404033bb881623a113931e1edf27', - 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg'], + 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x samd2x_l2x samg'], 'hw/mcu/mindmotion/mm32sdk': ['https://github.com/hathach/mm32sdk.git', 'b93e856211060ae825216c6a1d6aa347ec758843', 'mm32'], @@ -252,11 +252,11 @@ deps_optional = { 'hpmicro'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', - 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx rw61x mm32 msp432e4 nrf saml2x ' + 'imxrt kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx rw61x mm32 msp432e4 nrf samd2x_l2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' 'stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32u0 stm32u5 stm32wb stm32wba ' - 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg ' + 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x samd2x_l2x samg ' 'tm4c '], 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', '6f0a58d01aa9bd2feba212097f9afe7acd991d52', -- cgit v1.3.1 From dfe7a97d342c0cca832c121cd4bd66043043bd27 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 00:41:46 +0700 Subject: remove `membrowse-targets.json` as it is no longer required --- .github/membrowse-targets.json | 494 --------------------------------------- .github/workflows/build_util.yml | 13 -- 2 files changed, 507 deletions(-) delete mode 100644 .github/membrowse-targets.json diff --git a/.github/membrowse-targets.json b/.github/membrowse-targets.json deleted file mode 100644 index 05c90c74e..000000000 --- a/.github/membrowse-targets.json +++ /dev/null @@ -1,494 +0,0 @@ -{ - "templates": { - "build_cmd": "python3 tools/build.py -s cmake -b ${board}", - "elf": "cmake-build/cmake-build-${board}/device/${example}/${example}.elf", - "setup_cmd": "${toolchain.setup_cmd} && python3 tools/get_deps.py ${get_deps}", - "get_deps": "${port}" - }, - "toolchains": { - "arm-none-eabi-gcc-14": { - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-arm-none-eabi-gcc-14.2.1-1.1/bin\" >> $GITHUB_PATH" - }, - "aarch64-none-elf-gcc-10": { - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.xz && tar -C $HOME/toolchain -xf toolchain.tar.xz && echo \"$HOME/toolchain/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf/bin\" >> $GITHUB_PATH" - }, - "riscv-none-elf-gcc-13": { - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.gz && tar -C $HOME/toolchain -xf toolchain.tar.gz && echo \"$HOME/toolchain/xpack-riscv-none-elf-gcc-13.2.0-2/bin\" >> $GITHUB_PATH" - }, - "msp430-gcc-9": { - "setup_cmd": "NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip && wget -q $NINJA_URL -O ninja-linux.zip && unzip -q ninja-linux.zip -d $HOME/bin && echo \"$HOME/bin\" >> $GITHUB_PATH && TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 && mkdir -p $HOME/toolchain && wget -q $TOOLCHAIN_URL -O toolchain.tar.bz2 && tar -C $HOME/toolchain -xf toolchain.tar.bz2 && echo \"$HOME/toolchain/msp430-gcc-9.2.0.50_linux64/bin\" >> $GITHUB_PATH" - } - }, - "targets": [ - { - "port": "at32f402_405", - "board": "at_start_f402", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/artery/at32f402_405/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F402xC_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "at32f403a_407", - "board": "at32f403a_weact_blackpill", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/artery/at32f403a_407/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F403AxC_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "at32f413", - "board": "at_start_f413", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/artery/at32f413/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F413xC_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "at32f415", - "board": "at_start_f415", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/artery/at32f415/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F415xC_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "at32f423", - "board": "at_start_f423", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/artery/at32f423/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F423xC_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "at32f425", - "board": "at_start_f425", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/artery/at32f425/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F425x8_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "at32f435_437", - "board": "at_start_f435", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/artery/at32f435_437/libraries/cmsis/cm4/device_support/startup/gcc/linker/AT32F435xM_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "broadcom_32bit", - "board": "raspberrypi_zero", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/broadcom/broadcom/link.ld", - "example": "cdc_msc" - }, - { - "port": "broadcom_64bit", - "board": "raspberrypi_cm4", - "toolchain": "aarch64-none-elf-gcc-10", - "ld": "hw/mcu/broadcom/broadcom/link8.ld", - "example": "cdc_msc" - }, - { - "port": "ch32v10x", - "board": "ch32v103r_r1_1v0", - "toolchain": "riscv-none-elf-gcc-13", - "ld": "hw/bsp/ch32v10x/linker/ch32v10x.ld", - "linker_vars": "__FLASH_SIZE=64K __RAM_SIZE=20K", - "example": "cdc_msc" - }, - { - "port": "ch32v20x", - "board": "ch32v203c_r0_1v0", - "toolchain": "riscv-none-elf-gcc-13", - "ld": "hw/bsp/ch32v20x/linker/ch32v20x.ld", - "linker_vars": "__flash_size=64K __ram_size=20K", - "example": "cdc_msc" - }, - { - "port": "ch32v30x", - "board": "ch32v307v_r1_1v0", - "toolchain": "riscv-none-elf-gcc-13", - "ld": "hw/bsp/ch32v30x/linker/ch32v30x.ld", - "linker_vars": "__flash_size=128K __ram_size=32K", - "example": "cdc_msc" - }, - { - "port": "da1469x", - "board": "da14695_dk_usb", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/da1469x/linker/da1469x.ld", - "example": "cdc_msc" - }, - { - "port": "fomu", - "board": "fomu", - "toolchain": "riscv-none-elf-gcc-13", - "ld": "hw/bsp/fomu/fomu.ld", - "example": "cdc_msc" - }, - { - "port": "gd32vf103", - "board": "sipeed_longan_nano", - "toolchain": "riscv-none-elf-gcc-13", - "ld": "hw/mcu/gd/nuclei-sdk/SoC/gd32vf103/Board/gd32vf103c_longan_nano/Source/GCC/gcc_gd32vf103xb_flashxip.ld", - "linker_vars": "__ROM_BASE=0x08000000 __ROM_SIZE=0x00020000 __RAM_BASE=0x20000000 __RAM_SIZE=0x00008000", - "example": "cdc_msc" - }, - { - "port": "hpmicro", - "board": "hpm6750evk2", - "toolchain": "riscv-none-elf-gcc-13", - "ld": "hw/mcu/hpmicro/hpm_sdk/soc/HPM6700/HPM6750/toolchains/gcc/flash_xip.ld", - "linker_vars": "_flash_size=16M _stack_size=16K _heap_size=16K", - "example": "cdc_msc" - }, - { - "port": "imxrt", - "board": "metro_m7_1011", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/nxp/mcux-sdk/devices/MIMXRT1011/gcc/MIMXRT1011xxxxx_flexspi_nor.ld", - "example": "cdc_msc" - }, - { - "port": "kinetis_k", - "board": "frdm_k64f", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/nxp/mcux-sdk/devices/MK64F12/gcc/MK64FN1M0xxx12_flash.ld", - "get_deps": "kinetis_k kinetis_kl", - "example": "cdc_msc" - }, - { - "port": "kinetis_k32l2", - "board": "frdm_k32l2a4s", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/nxp/mcux-sdk/devices/K32L2A41A/gcc/K32L2A41xxxxA_flash.ld", - "example": "cdc_msc" - }, - { - "port": "kinetis_kl", - "board": "frdm_kl25z", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/kinetis_kl/gcc/MKL25Z128xxx4_flash.ld", - "example": "cdc_msc" - }, - { - "port": "lpc11", - "board": "lpcxpresso11u37", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/lpc11/boards/lpcxpresso11u37/lpc11u37.ld", - "example": "cdc_msc" - }, - { - "port": "lpc13", - "board": "lpcxpresso1347", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/lpc13/boards/lpcxpresso1347/lpc1347.ld", - "example": "cdc_msc" - }, - { - "port": "lpc15", - "board": "lpcxpresso1549", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld", - "example": "cdc_msc" - }, - { - "port": "lpc17", - "board": "lpcxpresso1769", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld", - "example": "cdc_msc" - }, - { - "port": "lpc18", - "board": "lpcxpresso18s37", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld", - "example": "cdc_msc" - }, - { - "port": "lpc40", - "board": "ea4088_quickstart", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/lpc40/boards/ea4088_quickstart/lpc4088.ld", - "example": "cdc_msc" - }, - { - "port": "lpc43", - "board": "ea4357", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/lpc43/boards/ea4357/lpc4357.ld", - "example": "cdc_msc" - }, - { - "port": "lpc51", - "board": "lpcxpresso51u68", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/nxp/mcux-sdk/devices/LPC51U68/gcc/LPC51U68_flash.ld", - "example": "cdc_msc" - }, - { - "port": "lpc54", - "board": "lpcxpresso54114", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/nxp/mcux-sdk/devices/LPC54114/gcc/LPC54114J256_cm4_flash.ld", - "example": "cdc_msc" - }, - { - "port": "lpc55", - "board": "double_m33_express", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld", - "example": "cdc_msc" - }, - { - "port": "maxim", - "board": "apard32690", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/maxim/linker/max32690.ld", - "example": "cdc_msc" - }, - { - "port": "mcx", - "board": "frdm_mcxa153", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/nxp/mcux-sdk/devices/MCXA153/gcc/MCXA153_flash.ld", - "example": "cdc_msc" - }, - { - "port": "mm32", - "board": "mm32f327x_mb39", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld", - "example": "cdc_msc" - }, - { - "port": "msp430", - "board": "msp_exp430f5529lp", - "toolchain": "msp430-gcc-9", - "ld": "hw/mcu/ti/msp430/msp430-gcc-support-files/include/msp430f5529.ld", - "example": "cdc_msc" - }, - { - "port": "msp432e4", - "board": "msp_exp432e401y", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/ti/msp432e4/Source/msp432e411y.ld", - "example": "cdc_msc" - }, - { - "port": "nrf", - "board": "adafruit_clue", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/nrf/linker/nrf52840_xxaa.ld", - "example": "cdc_msc" - }, - { - "port": "nuc100_120", - "board": "nutiny_sdk_nuc120", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/nuc120_flash.ld", - "example": "cdc_msc" - }, - { - "port": "nuc121_125", - "board": "nutiny_sdk_nuc121", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/nuc121_flash.ld", - "example": "cdc_msc" - }, - { - "port": "nuc126", - "board": "nutiny_nuc126v", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/nuc126/boards/nutiny_nuc126v/nuc126_flash.ld", - "example": "cdc_msc" - }, - { - "port": "nuc505", - "board": "nutiny_sdk_nuc505", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/nuc505/boards/nutiny_sdk_nuc505/nuc505_flashtoram.ld", - "example": "cdc_msc" - }, - { - "port": "ra", - "board": "portenta_c33", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld hw/bsp/ra/boards/portenta_c33/script/fsp.ld", - "example": "cdc_msc" - }, - { - "port": "rw61x", - "board": "frdm_rw612", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/nxp/mcux-sdk/devices/RW612/gcc/RW612_flash.ld", - "example": "cdc_msc" - }, - { - "port": "samd11", - "board": "cynthion_d11", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/samd11/boards/cynthion_d11/cynthion_d11.ld", - "linker_vars": "BOOTLOADER_SIZE=0x800", - "example": "cdc_dual_ports" - }, - { - "port": "samd5x_e5x", - "board": "metro_m4_express", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/samd5x_e5x/boards/metro_m4_express/metro_m4_express.ld", - "example": "cdc_msc" - }, - { - "port": "samg", - "board": "samg55_xplained", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/samg/boards/samg55_xplained/samg55j19_flash.ld", - "example": "cdc_msc" - }, - { - "port": "stm32c0", - "board": "stm32c071nucleo", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32f0", - "board": "stm32f070rbnucleo", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld", - "example": "cdc_msc" - }, - { - "port": "stm32f1", - "board": "stm32f103_bluepill", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32f2", - "board": "stm32f207nucleo", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32f2/boards/stm32f207nucleo/STM32F207ZGTx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32f3", - "board": "stm32f303disco", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32f3/boards/stm32f303disco/STM32F303VCTx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32f4", - "board": "feather_stm32f405", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32f7", - "board": "stlinkv3mini", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32g0", - "board": "stm32g0b1nucleo", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32g0/boards/stm32g0b1nucleo/STM32G0B1RETx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32g4", - "board": "b_g474e_dpow1", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32g4/boards/b_g474e_dpow1/STM32G474RETx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32h5", - "board": "stm32h503nucleo", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32h7", - "board": "stm32h743eval", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32h7/linker/stm32h743xx_flash.ld", - "example": "cdc_msc" - }, - { - "port": "stm32h7rs", - "board": "stm32h7s3nucleo", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32h7rs/linker/stm32h7s3xx_flash.ld", - "linker_vars": "__FLASH_BEGIN=0x08000000 __FLASH_SIZE=0x00010000 __RAM_BEGIN=0x24000000 __RAM_SIZE=0x4FC00 __RAM_NONCACHEABLEBUFFER_SIZE=0x400", - "example": "cdc_msc" - }, - { - "port": "stm32l0", - "board": "stm32l052dap52", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32l4", - "board": "stm32l412nucleo", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32n6", - "board": "stm32n6570dk", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32n6/boards/stm32n6570dk/STM32N657XX_AXISRAM2_fsbl.ld", - "example": "cdc_msc" - }, - { - "port": "stm32u0", - "board": "stm32u083cdk", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32u0/boards/stm32u083cdk/STM32U083MCTx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32u5", - "board": "b_u585i_iot2a", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32u5/linker/STM32U5A9xx_FLASH.ld", - "example": "cdc_msc" - }, - { - "port": "stm32wb", - "board": "stm32wb55nucleo", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld", - "example": "cdc_msc" - }, - { - "port": "stm32wba", - "board": "stm32wba_nucleo", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/stm32wba/linker/STM32WBA65xx_FLASH_ns.ld", - "example": "cdc_msc" - }, - { - "port": "tm4c", - "board": "ek_tm4c123gxl", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld", - "example": "cdc_msc" - }, - { - "port": "xmc4000", - "board": "xmc4500_relax", - "toolchain": "arm-none-eabi-gcc-14", - "ld": "hw/mcu/infineon/mtb-xmclib-cat3/CMSIS/Infineon/COMPONENT_XMC4500/Source/TOOLCHAIN_GCC_ARM/XMC4500x1024.ld", - "example": "cdc_msc" - } - ] -} diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 8a3dd8f91..d34c41406 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -79,19 +79,6 @@ jobs: name: metrics-${{ matrix.arg }} path: cmake-build/cmake-build-*/metrics.json - - name: Copy linker scripts for artifacts - if: ${{ inputs.upload-artifacts }} - run: | - for dir in cmake-build/cmake-build-*; do - board=$(basename "$dir" | sed 's/cmake-build-//') - ld_path=$(jq -r --arg b "$board" '.targets[] | select(.board == $b) | .ld // empty' .github/membrowse-targets.json) - if [ -n "$ld_path" ] && [ -f "$ld_path" ]; then - mkdir -p "cmake-build/$(dirname "$ld_path")" - cp "$ld_path" "cmake-build/$ld_path" - fi - done - shell: bash - - name: Upload Artifacts for Hardware Testing if: ${{ inputs.upload-artifacts }} uses: actions/upload-artifact@v5 -- cgit v1.3.1 From 07a3b3b34f67b12cbbe7865923341d9746a1e8fc Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 10:39:43 +0700 Subject: fetch depth 0 if membrowse-upload --- .github/workflows/build_util.yml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index d34c41406..eb3c4df89 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -43,6 +43,8 @@ jobs: steps: - name: Checkout TinyUSB uses: actions/checkout@v6 + with: + fetch-depth: ${{ !inputs.upload-membrowse && 1 || 0 }} - name: Setup Toolchain id: setup-toolchain -- cgit v1.3.1 From 2e8e33f28494307276d7a5417569461fe6584b80 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 16:34:28 +0700 Subject: add build target argument to improve flexibility of build scripts and workflows membrowse-upload upload with --identical if elf file does not exist --- .github/workflows/build.yml | 23 +++++++++-------- .github/workflows/build_util.yml | 38 +++++++++++++++++++--------- hw/bsp/family_support.cmake | 54 ++++++++++++++++++++++++++++++++++------ tools/build.py | 43 +++++++++++++------------------- 4 files changed, 103 insertions(+), 55 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 2b0c38c4f..412d52bb8 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -47,8 +47,6 @@ jobs: - '.github/workflows/ci_set_matrix.py' set-matrix: - needs: [ check-paths ] - if: needs.check-paths.outputs.code_changed == 'true' runs-on: ubuntu-latest outputs: json: ${{ steps.set-matrix-json.outputs.matrix }} @@ -75,7 +73,7 @@ jobs: # For Make and IAR build: will be done on CircleCI only (one random per family as well) # ------------------------------------------------------------------------------ cmake: - needs: set-matrix + needs: [ check-paths, set-matrix ] uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -95,10 +93,12 @@ jobs: upload-metrics: true upload-artifacts: false upload-membrowse: true + code-changed: ${{ needs.check-paths.outputs.code_changed == 'true' }} secrets: inherit code-metrics: - needs: cmake + needs: [ check-paths, cmake ] + if: needs.check-paths.outputs.code_changed == true runs-on: ubuntu-latest permissions: pull-requests: write @@ -196,17 +196,18 @@ jobs: # --------------------------------------- build-os: needs: [ check-paths ] - if: needs.check-paths.outputs.code_changed == 'true' + if: needs.check-paths.outputs.code_changed == true uses: ./.github/workflows/build_util.yml strategy: fail-fast: false matrix: os: [ windows-latest, macos-latest ] + build-system: [ 'make', 'cmake' ] with: os: ${{ matrix.os }} - build-system: 'cmake-make' + build-system: ${{ matrix.build-system }} toolchain: 'arm-gcc-${{ matrix.os }}' - build-args: '["stm32h7"]' + build-args: '["stm32h7rs"]' build-options: '--one-random' # --------------------------------------- @@ -215,7 +216,8 @@ jobs: zephyr: needs: [ check-paths ] # skip zephyr build due to failed build, fix later - if: false && needs.check-paths.outputs.code_changed == 'true' + if: false + #if: needs.check-paths.outputs.code_changed == 'true' runs-on: ubuntu-latest steps: - name: Checkout TinyUSB @@ -237,8 +239,8 @@ jobs: # Run on PR only (hil-tinyusb), hil-hfp only run on non-forked PR # --------------------------------------- hil-build: - needs: set-matrix - if: github.repository_owner == 'hathach' + needs: [ check-paths, set-matrix ] + if: needs.check-paths.outputs.code_changed == true && github.repository_owner == 'hathach' uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -299,6 +301,7 @@ jobs: hil-hfp: needs: [ check-paths ] if: | + needs.check-paths.outputs.code_changed == true && github.repository_owner == 'hathach' && !(github.event_name == 'pull_request' && github.event.pull_request.head.repo.fork == true) runs-on: [ self-hosted, Linux, X64, hifiphile ] diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index eb3c4df89..4200c11bd 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -3,6 +3,10 @@ name: Reusable build util on: workflow_call: inputs: + os: + required: false + type: string + default: 'ubuntu-latest' build-system: required: true type: string @@ -28,10 +32,10 @@ on: required: false default: false type: boolean - os: + code-changed: required: false - type: string - default: 'ubuntu-latest' + default: false + type: boolean jobs: family: @@ -58,19 +62,29 @@ jobs: arg: ${{ matrix.arg }} - name: Build + if: ${{ inputs.code-changed }} env: IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} - MEMBROWSE_API_KEY: ${{ secrets.MEMBROWSE_API_KEY }} - MEMBROWSE_UPLOAD_OPTION: ${{ inputs.upload-membrowse && '--membrowse-upload' || '' }} - TOOLCHAIN: ${{ inputs.toolchain }} run: | - if [ "$TOOLCHAIN" == "esp-idf" ]; then - docker run --rm -e MEMBROWSE_API_KEY="$MEMBROWSE_API_KEY" -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py $MEMBROWSE_UPLOAD_OPTION ${{ matrix.arg }} - elif [ "${{ inputs.build-system }}" == "cmake-make" ] || [ "${{ inputs.build-system }}" == "make-cmake" ]; then - python tools/build.py -s make $MEMBROWSE_UPLOAD_OPTION ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} ${{ matrix.arg }} - python tools/build.py -s cmake $MEMBROWSE_UPLOAD_OPTION ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} ${{ matrix.arg }} + if [ "${{ inputs.toolchain }}" == "esp-idf" ]; then + docker run --rm -e MEMBROWSE_API_KEY="$MEMBROWSE_API_KEY" -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py -T all ${{ matrix.arg }} else - python tools/build.py -s ${{ inputs.build-system }} $MEMBROWSE_UPLOAD_OPTION ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} ${{ matrix.arg }} + BUILD_PY_ARGS="-s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }}" + python tools/build.py $BUILD_PY_ARGS --target all ${{ matrix.arg }} + + if [ "${{ inputs.upload-metrics }}" = "true" ]; then + python tools/build.py $BUILD_PY_ARGS --target tinyusb_metrics ${{ matrix.arg }} + fi + fi + shell: bash + + - name: Membrowse Upload + if: inputs.toolchain != 'esp-idf' + env: + MEMBROWSE_API_KEY: ${{ secrets.MEMBROWSE_API_KEY }} + run: | + if [ "${{ inputs.upload-membrowse }}" = "true" ]; then + python tools/build.py $BUILD_PY_ARGS --target examples-membrowse-upload ${{ matrix.arg }} fi shell: bash diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 57a323c4a..fdf7b78ed 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -280,21 +280,62 @@ function(family_add_membrowse TARGET) string(APPEND OPTION " ${MEMBROWSE_OPTION}") endif () - # For Ninja generator, extract all linker scripts from Ninja commands and pass them to membrowse. + # For Ninja generator, extract all linker scripts from Ninja commands (with INCLUDE) and pass them to membrowse. if (CMAKE_GENERATOR MATCHES "Ninja") + set(TARGET_ELF_PATH "$/$") + set(MEMBROWSE_LD_SCRIPTS_CMD + "ld_scripts=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?:-Wl,--script=|-T\\s*)\\K[A-Za-z0-9_./-]+\\.ld' | xargs)\"; \ +all_ld_scripts=\"\"; \ +pending_ld_scripts=\"$ld_scripts\"; \ +while [ -n \"$pending_ld_scripts\" ]; do \ + next_pending=\"\"; \ + for script in $pending_ld_scripts; do \ + case \" $all_ld_scripts \" in *\" $script \"*) continue ;; esac; \ + all_ld_scripts=\"$all_ld_scripts $script\"; \ + script_dir=$(dirname \"$script\"); \ + include_scripts=$(grep -hoP '^\\s*INCLUDE\\s+[<\"]?\\K[^\">[:space:]]+\\.ld' \"$script\" 2>/dev/null | xargs); \ + for include_script in $include_scripts; do \ + resolved_script=\"\"; \ + if [ -f \"$include_script\" ]; then \ + resolved_script=\"$include_script\"; \ + elif [ -f \"$script_dir/$include_script\" ]; then \ + resolved_script=\"$script_dir/$include_script\"; \ + fi; \ + if [ -n \"$resolved_script\" ]; then \ + case \" $all_ld_scripts $next_pending \" in *\" $resolved_script \"*) ;; *) next_pending=\"$next_pending $resolved_script\" ;; esac; \ + fi; \ + done; \ + done; \ + pending_ld_scripts=\"$(echo \"$next_pending\" | xargs)\"; \ +done; \ +ld_scripts=\"$(echo \"$all_ld_scripts\" | xargs)\"") + set(MEMBROWSE_CMD - "ld_scripts=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?<=-Wl,--script=)[A-Za-z0-9_./-]+\\.ld' | xargs)\"; \ -${MEMBROWSE_EXE} report ${OPTION} $ \"$ld_scripts\"") + "if [ -f \"${TARGET_ELF_PATH}\" ]; then \ + ${MEMBROWSE_LD_SCRIPTS_CMD}; \ + echo ld_scripts=\"$ld_scripts\"; \ + if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ + ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\" --upload --github --target-name ${BOARD}-${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ + else \ + ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\"; \ + fi; \ +else \ + if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ + ${MEMBROWSE_EXE} report ${OPTION} --identical --upload --github --target-name ${BOARD}-${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ + else \ + ${MEMBROWSE_EXE} report ${OPTION} --identical; \ + fi; \ +fi") add_custom_target(${TARGET}-membrowse DEPENDS ${TARGET} - COMMAND bash -lc "${MEMBROWSE_CMD}" + COMMAND ${CMAKE_COMMAND} -E env MEMBROWSE_UPLOAD=0 bash -lc "${MEMBROWSE_CMD}" VERBATIM ) + set_property(TARGET ${TARGET}-membrowse PROPERTY FOLDER ${TARGET}) add_custom_target(${TARGET}-membrowse-upload - DEPENDS ${TARGET} - COMMAND bash -lc "${MEMBROWSE_CMD} --upload --github --target-name ${BOARD}-${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}" + COMMAND ${CMAKE_COMMAND} -E env MEMBROWSE_UPLOAD=1 bash -lc "${MEMBROWSE_CMD}" VERBATIM ) @@ -303,7 +344,6 @@ ${MEMBROWSE_EXE} report ${OPTION} $ \"$ld_scripts\"") endif () add_dependencies(examples-membrowse-upload ${TARGET}-membrowse-upload) - set_property(TARGET ${TARGET}-membrowse PROPERTY FOLDER ${TARGET}) set_property(TARGET ${TARGET}-membrowse-upload PROPERTY FOLDER ${TARGET}) endif () endfunction() diff --git a/tools/build.py b/tools/build.py index bc032fb91..d26028c51 100755 --- a/tools/build.py +++ b/tools/build.py @@ -98,15 +98,15 @@ def get_examples(family): return all_examples -def print_build_result(board, example, status, duration): +def print_build_result(board, build_target, status, duration): if isinstance(duration, (int, float)): duration = "{:.2f}s".format(duration) - print(build_format.format(board, example, build_status[status], duration)) + print(build_format.format(board, build_target, build_status[status], duration)) # ----------------------------- # CMake # ----------------------------- -def cmake_board(board, build_args, build_flags_on, membrowse_upload): +def cmake_board(board, build_args, build_flags_on, build_target): ret = [0, 0, 0] start_time = time.monotonic() @@ -137,26 +137,18 @@ def cmake_board(board, build_args, build_flags_on, membrowse_upload): if rcmd.returncode == 0: if clean_build: run_cmd(["cmake", "--build", build_dir, '--target', 'clean']) - cmd = ["cmake", "--build", build_dir, '--parallel', str(parallel_jobs)] + cmd = ["cmake", "--build", build_dir, '--target', build_target, '--parallel', str(parallel_jobs)] rcmd = run_cmd(cmd) - if rcmd.returncode == 0: - ret[0] += 1 - run_cmd(["cmake", "--build", build_dir, '--target', 'tinyusb_metrics']) - if membrowse_upload: - run_cmd(["cmake", "--build", build_dir, '--target', 'examples-membrowse-upload']) - # print(rcmd.stdout.decode("utf-8")) - else: - ret[1] += 1 + ret[0 if rcmd.returncode == 0 else 1] += 1 - example = 'all' - print_build_result(board, example, 0 if ret[1] == 0 else 1, time.monotonic() - start_time) + print_build_result(board, build_target, 0 if ret[1] == 0 else 1, time.monotonic() - start_time) return ret # ----------------------------- # Make # ----------------------------- -def make_one_example(example, board, make_option): +def make_one_example(example, board, make_option, build_target): # Check if board is skipped if build_utils.skip_example(example, board): print_build_result(board, example, 2, '-') @@ -168,7 +160,7 @@ def make_one_example(example, board, make_option): make_args += shlex.split(make_option) if clean_build: run_cmd(make_args + ["clean"]) - build_result = run_cmd(make_args + ['all']) + build_result = run_cmd(make_args + [build_target]) r = 0 if build_result.returncode == 0 else 1 print_build_result(board, example, r, time.monotonic() - start_time) @@ -177,7 +169,7 @@ def make_one_example(example, board, make_option): return ret -def make_board(board, build_args): +def make_board(board, build_args, build_target): print(build_separator) family = find_family(board); all_examples = get_examples(family) @@ -188,7 +180,7 @@ def make_board(board, build_args): final_status = 2 else: with Pool(processes=os.cpu_count()) as pool: - pool_args = list((map(lambda e, b=board, o=f"{build_args}": [e, b, o], all_examples))) + pool_args = list((map(lambda e, b=board, o=f"{build_args}", t=build_target: [e, b, o, t], all_examples))) r = pool.starmap(make_one_example, pool_args) # sum all element of same index (column sum) ret = list(map(sum, list(zip(*r)))) @@ -200,16 +192,16 @@ def make_board(board, build_args): # ----------------------------- # Build Family # ----------------------------- -def build_boards_list(boards, build_defines, build_system, build_flags_on, membrowse_upload): +def build_boards_list(boards, build_defines, build_system, build_flags_on, build_target): ret = [0, 0, 0] for b in boards: r = [0, 0, 0] if build_system == 'cmake': build_args = [f'-D{d}' for d in build_defines] - r = cmake_board(b, build_args, build_flags_on, membrowse_upload) + r = cmake_board(b, build_args, build_flags_on, build_target) elif build_system == 'make': build_args = ' '.join(f'{d}' for d in build_defines) - r = make_board(b, build_args) + r = make_board(b, build_args, build_target) ret[0] += r[0] ret[1] += r[1] ret[2] += r[2] @@ -275,8 +267,7 @@ def main(): parser.add_argument('--one-first', action='store_true', default=False, help='Build only the first board (alphabetical) of each specified family') parser.add_argument('-j', '--jobs', type=int, default=os.cpu_count(), help='Number of jobs to run in parallel') - parser.add_argument('--membrowse-upload', action='store_true', default=False, - help='Run examples-membrowse-upload target after successful CMake build') + parser.add_argument('-T', '--target', default='all', help='Build target to use, default is all') parser.add_argument('-v', '--verbose', action='store_true', help='Verbose output') args = parser.parse_args() @@ -288,7 +279,7 @@ def main(): build_flags_on = args.build_flags_on one_random = args.one_random one_first = args.one_first - membrowse_upload = args.membrowse_upload + build_target = args.target verbose = args.verbose clean_build = args.clean parallel_jobs = args.jobs @@ -300,7 +291,7 @@ def main(): return 1 print(build_separator) - print(build_format.format('Board', 'Example', '\033[39mResult\033[0m', 'Time')) + print(build_format.format('Board', 'Target', '\033[39mResult\033[0m', 'Time')) total_time = time.monotonic() # get all families @@ -319,7 +310,7 @@ def main(): all_boards.extend(get_family_boards(f, one_random, one_first)) # build all boards - result = build_boards_list(all_boards, build_defines, build_system, build_flags_on, membrowse_upload) + result = build_boards_list(all_boards, build_defines, build_system, build_flags_on, build_target) total_time = time.monotonic() - total_time print(build_separator) -- cgit v1.3.1 From c69e2e0a2a6a0786e70c417e2e61c834a524aabb Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 16:51:48 +0700 Subject: update membrowse target to family/board/target --- hw/bsp/family_support.cmake | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index fdf7b78ed..9c3db4002 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -315,13 +315,13 @@ ld_scripts=\"$(echo \"$all_ld_scripts\" | xargs)\"") ${MEMBROWSE_LD_SCRIPTS_CMD}; \ echo ld_scripts=\"$ld_scripts\"; \ if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ - ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\" --upload --github --target-name ${BOARD}-${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ + ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\" --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ else \ ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\"; \ fi; \ else \ if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ - ${MEMBROWSE_EXE} report ${OPTION} --identical --upload --github --target-name ${BOARD}-${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ + ${MEMBROWSE_EXE} report ${OPTION} --identical --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ else \ ${MEMBROWSE_EXE} report ${OPTION} --identical; \ fi; \ -- cgit v1.3.1 From 9bba4373bf74181f75a8fdf93c8574ca3d4b4f43 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 17:18:26 +0700 Subject: parse and pass linker symbol to membrowse report --- hw/bsp/family_support.cmake | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 9c3db4002..80ebb7bef 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -309,15 +309,24 @@ while [ -n \"$pending_ld_scripts\" ]; do \ pending_ld_scripts=\"$(echo \"$next_pending\" | xargs)\"; \ done; \ ld_scripts=\"$(echo \"$all_ld_scripts\" | xargs)\"") + set(MEMBROWSE_LD_DEFS_CMD + "ld_symbols=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?<=-Wl,--defsym=)[^[:space:]]+' | xargs)\"; \ +ld_defs=\"\"; \ +for symbol in $ld_symbols; do \ + ld_defs=\"$ld_defs --def $symbol\"; \ +done; \ +ld_defs=\"$(echo \"$ld_defs\" | xargs)\"") set(MEMBROWSE_CMD "if [ -f \"${TARGET_ELF_PATH}\" ]; then \ ${MEMBROWSE_LD_SCRIPTS_CMD}; \ + ${MEMBROWSE_LD_DEFS_CMD}; \ echo ld_scripts=\"$ld_scripts\"; \ + echo ld_defs=\"$ld_defs\"; \ if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ - ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\" --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ + ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\" $ld_defs --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ else \ - ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\"; \ + ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\" $ld_defs; \ fi; \ else \ if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ -- cgit v1.3.1 From 8c9901c31892e9213acc52538cc56c7cb24883b0 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 18:17:16 +0700 Subject: correct membrowse upload step --- .github/workflows/build_util.yml | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 4200c11bd..1a119b132 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -79,13 +79,12 @@ jobs: shell: bash - name: Membrowse Upload - if: inputs.toolchain != 'esp-idf' + if: inputs.toolchain != 'esp-idf' && inputs.upload-membrowse == true env: MEMBROWSE_API_KEY: ${{ secrets.MEMBROWSE_API_KEY }} run: | - if [ "${{ inputs.upload-membrowse }}" = "true" ]; then - python tools/build.py $BUILD_PY_ARGS --target examples-membrowse-upload ${{ matrix.arg }} - fi + BUILD_PY_ARGS="-s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }}" + python tools/build.py $BUILD_PY_ARGS --target examples-membrowse-upload -j 1 ${{ matrix.arg }} shell: bash - name: Upload Artifacts for Metrics -- cgit v1.3.1 From 2f1b6296c6ea5506d8a8ff837a1cf8fbf8b1f9e0 Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Wed, 11 Feb 2026 15:04:04 +0100 Subject: Split functions calling tusb_time_delay_ms_api() --- src/host/usbh.c | 188 +++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 117 insertions(+), 71 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index 41f41dcfb..c61001dff 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -169,6 +169,9 @@ static OSAL_SPINLOCK_DEF(_usbh_spin, usbh_int_set); OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); static osal_queue_t _usbh_q; +// Callback after waiting +typedef void (*usbh_wait_delay_cb)(void); + // Control transfers: since most controllers do not support multiple control transfers // on multiple devices concurrently and control transfers are not used much except for // enumeration, we will only execute control transfers one at a time. @@ -187,8 +190,10 @@ typedef struct { uint8_t controller_id; // controller ID uint8_t enumerating_daddr; // device address of the device being enumerated uint8_t attach_debouncing_bm; // bitmask for roothub port attach debouncing + uint8_t enum_failed_count; // see process_enumeration() tuh_bus_info_t dev0_bus; // bus info for dev0 in enumeration usbh_ctrl_xfer_info_t ctrl_xfer_info; // control transfer + tuh_xfer_t enum_xfer_retry; // enumeration transfer to retry } usbh_data_t; static usbh_data_t _usbh_data = { @@ -311,7 +316,7 @@ TU_ATTR_ALWAYS_INLINE static inline usbh_class_driver_t const *get_driver(uint8_ //--------------------------------------------------------------------+ // Function Inline and Prototypes //--------------------------------------------------------------------+ -static bool enum_new_device(hcd_event_t* event); +static void enum_new_device(hcd_event_t* event); static void process_remove_event(hcd_event_t *event); static void remove_device_tree(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port); static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); @@ -349,6 +354,12 @@ TU_ATTR_ALWAYS_INLINE static inline bool usbh_setup_send(uint8_t daddr, const ui return ret; } +TU_ATTR_ALWAYS_INLINE static inline void usbh_wait_delay_ms(uint32_t delay_ms, usbh_wait_delay_cb complete_cb) +{ + tusb_time_delay_ms_api(delay_ms); + complete_cb(); +} + TU_ATTR_ALWAYS_INLINE static inline void usbh_device_close(uint8_t rhport, uint8_t daddr) { hcd_device_close(rhport, daddr); @@ -1449,16 +1460,29 @@ static bool enum_parse_configuration_desc (uint8_t dev_addr, tusb_desc_configura static void enum_full_complete(bool success); static void process_enumeration(tuh_xfer_t* xfer); +// continuation functions after waiting +static void enum_after_attempt_delay(void); +static void enum_after_debouncing_delay(void); +static void enum_after_reset_root_delay(void); +static void enum_after_reset_root_post_delay(void); +static void enum_after_reset_recovery_delay(void); +static void enum_after_set_address_recovery_delay(void); +#if CFG_TUH_HUB +static void enum_after_reset_hub_delay(void); +#endif + // start a new enumeration process -static bool enum_new_device(hcd_event_t* event) { +static void enum_new_device(hcd_event_t* event) { tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; dev0_bus->rhport = event->rhport; dev0_bus->hub_addr = event->connection.hub_addr; dev0_bus->hub_port = event->connection.hub_port; - // wait until device connection is stable TODO non blocking - tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS); + usbh_wait_delay_ms(ENUM_DEBOUNCING_DELAY_MS, enum_after_debouncing_delay); +} +static void enum_after_debouncing_delay(void) { + tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; if (dev0_bus->hub_addr == 0) { // connected directly to roothub // USB bus not active and frame number is not available yet. @@ -1469,68 +1493,72 @@ static bool enum_new_device(hcd_event_t* event) { if (!hcd_port_connect_status(dev0_bus->rhport)) { TU_LOG_USBH("Device unplugged while debouncing\r\n"); enum_full_complete(false); - return true; + return; } // reset device hcd_port_reset(dev0_bus->rhport); - tusb_time_delay_ms_api(ENUM_RESET_ROOT_DELAY_MS); - hcd_port_reset_end(dev0_bus->rhport); - tusb_time_delay_ms_api(ENUM_RESET_ROOT_POST_DELAY_MS); - - if (!hcd_port_connect_status(dev0_bus->rhport)) { - // device unplugged while delaying - enum_full_complete(false); - return true; - } - - dev0_bus->speed = hcd_port_speed_get(dev0_bus->rhport); - TU_LOG_USBH("%s Speed\r\n", tu_str_speed[dev0_bus->speed]); - - // fake transfer to kick-off the enumeration process - tuh_xfer_t xfer; - xfer.daddr = 0; - xfer.result = XFER_RESULT_SUCCESS; - xfer.user_data = ENUM_ADDR0_DEVICE_DESC; - process_enumeration(&xfer); + usbh_wait_delay_ms(ENUM_RESET_ROOT_DELAY_MS, enum_after_reset_root_delay); } #if CFG_TUH_HUB else { // connected via hub - TU_VERIFY(dev0_bus->hub_port != 0); + TU_VERIFY(dev0_bus->hub_port != 0,); TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, - process_enumeration, ENUM_HUB_RERSET)); + process_enumeration, ENUM_HUB_RERSET),); } #endif // hub +} - return true; +static void enum_after_reset_root_delay(void) { + tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; + hcd_port_reset_end(dev0_bus->rhport); + return usbh_wait_delay_ms(ENUM_RESET_ROOT_POST_DELAY_MS, enum_after_reset_root_post_delay); } +static void enum_after_reset_root_post_delay(void) { + tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; + if (!hcd_port_connect_status(dev0_bus->rhport)) { + // device unplugged while delaying + enum_full_complete(false); + return; + } + + dev0_bus->speed = hcd_port_speed_get(dev0_bus->rhport); + TU_LOG_USBH("%s Speed\r\n", tu_str_speed[dev0_bus->speed]); + + // fake transfer to kick-off the enumeration process + tuh_xfer_t xfer; + xfer.daddr = 0; + xfer.result = XFER_RESULT_SUCCESS; + xfer.user_data = ENUM_ADDR0_DEVICE_DESC; + process_enumeration(&xfer); +} + +enum { + ATTEMPT_COUNT_MAX = 3, + ATTEMPT_DELAY_MS = 100 +}; + // process device enumeration static void process_enumeration(tuh_xfer_t* xfer) { // Retry a few times while enumerating since device can be unstable when starting up - static uint8_t failed_count = 0; + _usbh_data.enum_failed_count = 0; if (XFER_RESULT_FAILED == xfer->result) { - enum { - ATTEMPT_COUNT_MAX = 3, - ATTEMPT_DELAY_MS = 100 - }; // retry if not reaching max attempt - failed_count++; - bool retry = (_usbh_data.enumerating_daddr != TUSB_INDEX_INVALID_8) && (failed_count < ATTEMPT_COUNT_MAX); + _usbh_data.enum_failed_count++; + bool retry = (_usbh_data.enumerating_daddr != TUSB_INDEX_INVALID_8) && (_usbh_data.enum_failed_count < ATTEMPT_COUNT_MAX); if (retry) { - tusb_time_delay_ms_api(ATTEMPT_DELAY_MS); // delay a bit - TU_LOG_USBH("Enumeration attempt %u/%u\r\n", failed_count+1, ATTEMPT_COUNT_MAX); - retry = tuh_control_xfer(xfer); - } - - if (!retry) { + // save transfer for later + _usbh_data.enum_xfer_retry = *xfer; + usbh_wait_delay_ms(ATTEMPT_DELAY_MS, enum_after_attempt_delay); // wait for reset to take effect + } else { enum_full_complete(false); // complete as failed } return; } - failed_count = 0; + _usbh_data.enum_failed_count = 0; uint8_t const daddr = xfer->daddr; uintptr_t const state = xfer->user_data; @@ -1558,10 +1586,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { } case ENUM_HUB_GET_STATUS_AFTER_RESET: { - tusb_time_delay_ms_api(ENUM_RESET_HUB_DELAY_MS); // wait for reset to take effect - - // get status to check for reset change - TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, ENUM_HUB_CLEAR_RESET),); + usbh_wait_delay_ms(ENUM_RESET_HUB_DELAY_MS, enum_after_reset_hub_delay); // wait for reset to take effect break; } @@ -1598,20 +1623,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { #endif case ENUM_ADDR0_DEVICE_DESC: { - tusb_time_delay_ms_api(ENUM_RESET_RECOVERY_DELAY_MS); // reset recovery - - // TODO probably doesn't need to open/close each enumeration - uint8_t const addr0 = 0; - if (!usbh_edpt_control_open(addr0, 8)) { - // Stop enumeration gracefully - enum_full_complete(false); - TU_ASSERT(false,); - } - - // Get first 8 bytes of device descriptor for control endpoint size - TU_LOG_USBH("Get 8 byte of Device Descriptor\r\n"); - TU_ASSERT(tuh_descriptor_get_device(addr0, _usbh_epbuf.ctrl, 8, - process_enumeration, ENUM_SET_ADDR),); + usbh_wait_delay_ms(ENUM_RESET_RECOVERY_DELAY_MS, enum_after_reset_recovery_delay); break; } @@ -1630,8 +1642,6 @@ static void process_enumeration(tuh_xfer_t* xfer) { } case ENUM_GET_DEVICE_DESC: { - tusb_time_delay_ms_api(ENUM_SET_ADDRESS_RECOVERY_DELAY_MS); // set address recovery - const uint8_t new_addr = (uint8_t) tu_le16toh(xfer->setup->wValue); usbh_device_t* new_dev = get_device(new_addr); TU_ASSERT(new_dev,); @@ -1640,16 +1650,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { usbh_device_close(dev0_bus->rhport, 0); // close dev0 - if (!usbh_edpt_control_open(new_addr, new_dev->bMaxPacketSize0)) { // open new control endpoint - // Stop enumeration gracefully - clear_device(new_dev); - enum_full_complete(false); - TU_ASSERT(false,); - } - - TU_LOG_USBH("Get Device Descriptor\r\n"); - TU_ASSERT(tuh_descriptor_get_device(new_addr, _usbh_epbuf.ctrl, sizeof(tusb_desc_device_t), - process_enumeration, ENUM_GET_STRING_LANGUAGE_ID_LEN),); + usbh_wait_delay_ms(ENUM_SET_ADDRESS_RECOVERY_DELAY_MS, enum_after_set_address_recovery_delay); break; } @@ -1823,6 +1824,51 @@ static void process_enumeration(tuh_xfer_t* xfer) { } } +static void enum_after_attempt_delay(void) { + TU_LOG_USBH("Enumeration attempt %u/%u\r\n", _usbh_data.enum_failed_count+1, ATTEMPT_COUNT_MAX); + if (!tuh_control_xfer(&_usbh_data.enum_xfer_retry)) + enum_full_complete(false); // complete as failed +} + +static void enum_after_set_address_recovery_delay(void) { + const uint8_t new_addr =_usbh_data.enumerating_daddr; + usbh_device_t* new_dev = get_device(new_addr); + TU_ASSERT(new_dev,); + if (!usbh_edpt_control_open(new_addr, new_dev->bMaxPacketSize0)) { // open new control endpoint + // Stop enumeration gracefully + clear_device(new_dev); + enum_full_complete(false); + TU_ASSERT(false,); + } + + TU_LOG_USBH("Get Device Descriptor\r\n"); + TU_ASSERT(tuh_descriptor_get_device(new_addr, _usbh_epbuf.ctrl, sizeof(tusb_desc_device_t), + process_enumeration, ENUM_GET_STRING_LANGUAGE_ID_LEN),); +} + +static void enum_after_reset_recovery_delay(void) { + // TODO probably doesn't need to open/close each enumeration + uint8_t const addr0 = 0; + if (!usbh_edpt_control_open(addr0, 8)) { + // Stop enumeration gracefully + enum_full_complete(false); + TU_ASSERT(false,); + } + + // Get first 8 bytes of device descriptor for control endpoint size + TU_LOG_USBH("Get 8 byte of Device Descriptor\r\n"); + TU_ASSERT(tuh_descriptor_get_device(addr0, _usbh_epbuf.ctrl, 8, + process_enumeration, ENUM_SET_ADDR),); +} + +#if CFG_TUH_HUB +static void enum_after_reset_hub_delay(void) { + tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; + // get status to check for reset change + TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, ENUM_HUB_CLEAR_RESET),); +} +#endif + static uint8_t enum_get_new_address(bool is_hub) { uint8_t start; uint8_t end; -- cgit v1.3.1 From 2808b65a0eedf934b7c759b7de6f21636d377d14 Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Wed, 11 Feb 2026 15:05:25 +0100 Subject: Call continuation functions asynchronously --- src/host/usbh.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++------ src/tusb_option.h | 11 ++++++++++ 2 files changed, 67 insertions(+), 6 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index c61001dff..1b4963d3e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -193,7 +193,11 @@ typedef struct { uint8_t enum_failed_count; // see process_enumeration() tuh_bus_info_t dev0_bus; // bus info for dev0 in enumeration usbh_ctrl_xfer_info_t ctrl_xfer_info; // control transfer +#if CFG_TUH_TASK_USE_TIME_MILLIS_API tuh_xfer_t enum_xfer_retry; // enumeration transfer to retry + usbh_wait_delay_cb enum_wait_delay_cb; // continuation function after waiting + uint32_t enum_wait_deadline; // ticks when the timer expires +#endif } usbh_data_t; static usbh_data_t _usbh_data = { @@ -321,6 +325,7 @@ static void process_remove_event(hcd_event_t *event); static void remove_device_tree(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port); static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); +static void usbh_task_mq(uint32_t timeout_ms, bool in_isr); TU_ATTR_ALWAYS_INLINE static inline usbh_device_t* get_device(uint8_t dev_addr) { TU_VERIFY(dev_addr > 0 && dev_addr <= TOTAL_DEVICES, NULL); @@ -356,8 +361,15 @@ TU_ATTR_ALWAYS_INLINE static inline bool usbh_setup_send(uint8_t daddr, const ui TU_ATTR_ALWAYS_INLINE static inline void usbh_wait_delay_ms(uint32_t delay_ms, usbh_wait_delay_cb complete_cb) { +#if CFG_TUH_TASK_USE_TIME_MILLIS_API + TU_LOG_USBH("USBH start timer for %u ms\r\n", (unsigned int)delay_ms); + _usbh_data.enum_wait_deadline = tusb_time_millis_api() + delay_ms; + _usbh_data.enum_wait_delay_cb = complete_cb; +#else + TU_LOG_USBH("USBH sleep for %u ms\r\n", (unsigned int)delay_ms); tusb_time_delay_ms_api(delay_ms); complete_cb(); +#endif } TU_ATTR_ALWAYS_INLINE static inline void usbh_device_close(uint8_t rhport, uint8_t daddr) { @@ -371,6 +383,9 @@ TU_ATTR_ALWAYS_INLINE static inline void usbh_device_close(uint8_t rhport, uint8 // invalidate if enumerating if (daddr == _usbh_data.enumerating_daddr) { _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; +#if CFG_TUH_TASK_USE_TIME_MILLIS_API + _usbh_data.enum_wait_delay_cb = NULL; +#endif } } @@ -519,6 +534,9 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { _usbh_data.controller_id = TUSB_INDEX_INVALID_8; _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; +#if CFG_TUH_TASK_USE_TIME_MILLIS_API + _usbh_data.enum_wait_delay_cb = NULL; +#endif for (uint8_t i = 0; i < TOTAL_DEVICES; i++) { clear_device(&_usbh_devices[i]); @@ -603,13 +621,35 @@ bool tuh_task_event_ready(void) { @endcode */ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { - (void) in_isr; // not implemented yet - // Skip if stack is not initialized if (!tuh_inited()) { return; } +#if CFG_TUH_TASK_USE_TIME_MILLIS_API + // Process continuation function if timer is expired + usbh_wait_delay_cb delay_cb = _usbh_data.enum_wait_delay_cb; + if (delay_cb) { + int32_t ms = (int32_t)(_usbh_data.enum_wait_deadline - tusb_time_millis_api()); + if (ms <= 0) { + // delay expired, run callback now + TU_LOG_USBH("USBH run timer callback\r\n"); + _usbh_data.enum_wait_delay_cb = NULL; + delay_cb(); + } else if (timeout_ms > (uint32_t)ms) { + // reduce timeout accordingly + timeout_ms = (uint32_t)ms; + } + } +#endif + + // Process the message queue + usbh_task_mq(timeout_ms, in_isr); +} + +static void usbh_task_mq(uint32_t timeout_ms, bool in_isr) { + (void) in_isr; // not implemented yet + // Loop until there are no more events in the queue or CFG_TUH_TASK_EVENTS_PER_RUN is reached for (unsigned epr = 0;; epr++) { #if CFG_TUH_TASK_EVENTS_PER_RUN > 0 @@ -781,10 +821,8 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { while (result == XFER_RESULT_INVALID) { // Note: this can be called within an callback ie. part of tuh_task() - // therefore event with RTOS tuh_task() still need to be invoked - if (tuh_task_event_ready()) { - tuh_task(); - } + // therefore even with RTOS usbh_task_mq() still need to be invoked + usbh_task_mq(0, false); // TODO probably some timeout to prevent hanged } @@ -1461,7 +1499,9 @@ static void enum_full_complete(bool success); static void process_enumeration(tuh_xfer_t* xfer); // continuation functions after waiting +#if CFG_TUH_TASK_USE_TIME_MILLIS_API static void enum_after_attempt_delay(void); +#endif static void enum_after_debouncing_delay(void); static void enum_after_reset_root_delay(void); static void enum_after_reset_root_post_delay(void); @@ -1550,9 +1590,14 @@ static void process_enumeration(tuh_xfer_t* xfer) { _usbh_data.enum_failed_count++; bool retry = (_usbh_data.enumerating_daddr != TUSB_INDEX_INVALID_8) && (_usbh_data.enum_failed_count < ATTEMPT_COUNT_MAX); if (retry) { +#if CFG_TUH_TASK_USE_TIME_MILLIS_API // save transfer for later _usbh_data.enum_xfer_retry = *xfer; usbh_wait_delay_ms(ATTEMPT_DELAY_MS, enum_after_attempt_delay); // wait for reset to take effect +#else + if (!tuh_control_xfer(xfer)) + enum_full_complete(false); // complete as failed +#endif } else { enum_full_complete(false); // complete as failed } @@ -1824,11 +1869,13 @@ static void process_enumeration(tuh_xfer_t* xfer) { } } +#if CFG_TUH_TASK_USE_TIME_MILLIS_API static void enum_after_attempt_delay(void) { TU_LOG_USBH("Enumeration attempt %u/%u\r\n", _usbh_data.enum_failed_count+1, ATTEMPT_COUNT_MAX); if (!tuh_control_xfer(&_usbh_data.enum_xfer_retry)) enum_full_complete(false); // complete as failed } +#endif static void enum_after_set_address_recovery_delay(void) { const uint8_t new_addr =_usbh_data.enumerating_daddr; @@ -1982,6 +2029,9 @@ static void enum_full_complete(bool success) { (void)success; // mark enumeration as complete _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; +#if CFG_TUH_TASK_USE_TIME_MILLIS_API + _usbh_data.enum_wait_delay_cb = NULL; +#endif #if CFG_TUH_HUB // Hub status is already requested in case of successful enumeration diff --git a/src/tusb_option.h b/src/tusb_option.h index 8e270e5f2..4717846c6 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -689,6 +689,17 @@ #define CFG_TUH_TASK_EVENTS_PER_RUN 16 #endif +// use tusb_time_millis_api() instead of tusb_time_delay_ms_api() in tuh_task() +// tuh_task_ext() will be asynchronous and never sleep in tusb_time_delay_ms_api() +#ifndef CFG_TUH_TASK_USE_TIME_MILLIS_API + #if CFG_TUSB_OS == OPT_OS_RTX4 || CFG_TUSB_OS == OPT_OS_PICO || defined(ESP_PLATFORM) + // these boards/os do not implements the required tusb_time_millis_api() + #define CFG_TUH_TASK_USE_TIME_MILLIS_API 0 + #else + #define CFG_TUH_TASK_USE_TIME_MILLIS_API 1 + #endif +#endif + //------------- CLASS -------------// #ifndef CFG_TUH_HUB -- cgit v1.3.1 From 90d0514630d9b0f6d50881aabd82dcd613141f6b Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Wed, 11 Feb 2026 15:06:27 +0100 Subject: Put deferred attachments in a separate queue --- src/host/usbh.c | 43 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 35 insertions(+), 8 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index 1b4963d3e..ae337d867 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -169,6 +169,12 @@ static OSAL_SPINLOCK_DEF(_usbh_spin, usbh_int_set); OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); static osal_queue_t _usbh_q; +#if CFG_TUH_HUB +// Deferred attachment queue +OSAL_QUEUE_DEF(usbh_int_set, _usbh_daqdef, TOTAL_DEVICES, hcd_event_t); +static osal_queue_t _usbh_daq; +#endif + // Callback after waiting typedef void (*usbh_wait_delay_cb)(void); @@ -519,6 +525,12 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { _usbh_q = osal_queue_create(&_usbh_qdef); TU_ASSERT(_usbh_q != NULL); +#if CFG_TUH_HUB + // Deferred attachment queue + _usbh_daq = osal_queue_create(&_usbh_daqdef); + TU_ASSERT(_usbh_daq != NULL); +#endif + #if OSAL_MUTEX_REQUIRED // Init mutex _usbh_mutex = osal_mutex_create(&_usbh_mutexdef); @@ -587,11 +599,16 @@ bool tuh_deinit(uint8_t rhport) { osal_queue_delete(_usbh_q); _usbh_q = NULL; - #if OSAL_MUTEX_REQUIRED +#if CFG_TUH_HUB + osal_queue_delete(_usbh_daq); + _usbh_daq = NULL; +#endif + +#if OSAL_MUTEX_REQUIRED // TODO make sure there is no task waiting on this mutex osal_mutex_delete(_usbh_mutex); _usbh_mutex = NULL; - #endif +#endif } return true; @@ -643,6 +660,19 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { } #endif +#if CFG_TUH_HUB + // Process deferred device attachments + if (_usbh_data.enumerating_daddr == TUSB_INDEX_INVALID_8) { + hcd_event_t event; + if (osal_queue_receive(_usbh_daq, &event, 0)) { + // We are ready to process a new attachment + TU_LOG_USBH("[%u:] USBH Deferred Device Attach\r\n", event.rhport); + _usbh_data.enumerating_daddr = 0; // enumerate new device with address 0 + enum_new_device(&event); + } + } +#endif + // Process the message queue usbh_task_mq(timeout_ms, in_isr); } @@ -669,20 +699,17 @@ static void usbh_task_mq(uint32_t timeout_ms, bool in_isr) { process_remove_event(&event); // due to the shared control buffer, we must fully complete enumerating one device first. - // TODO better to have an separated queue for newly attached devices if (_usbh_data.enumerating_daddr == TUSB_INDEX_INVALID_8) { // New device attached and we are ready TU_LOG_USBH("[%u:] USBH Device Attach\r\n", event.rhport); _usbh_data.enumerating_daddr = 0; // enumerate new device with address 0 enum_new_device(&event); +#if CFG_TUH_HUB } else { // currently enumerating another device TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); - const bool is_empty = osal_queue_empty(_usbh_q); - queue_event(&event, in_isr); - if (is_empty) { - return; // Exit if this is the only event in the queue, otherwise we loop forever - } + TU_ASSERT(osal_queue_send(_usbh_daq, &event, in_isr),); +#endif } break; -- cgit v1.3.1 From 1586e80ffe7e3610f999208ddf25a6803b58e22e Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Wed, 11 Feb 2026 15:25:48 +0100 Subject: Introduce CFG_TUSB_DEBUG_BREAKPOINT hook --- src/common/tusb_verify.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index c9e06361c..931a53be7 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -73,8 +73,12 @@ #define TU_MESS_FAILED() do {} while (0) #endif + // Custom defined application function +#ifdef CFG_TUSB_DEBUG_BREAKPOINT +#define TU_BREAKPOINT() do { void CFG_TUSB_DEBUG_BREAKPOINT(void); CFG_TUSB_DEBUG_BREAKPOINT(); } while (0) + // Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7, M33. M55 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) || \ +#elif defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) || \ defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) #define TU_BREAKPOINT() do { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ -- cgit v1.3.1 From 75adb35f35acb6084fc053b468725070f5c662ec Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Wed, 11 Feb 2026 16:23:11 +0100 Subject: Update tusb_verify.h --- src/common/tusb_verify.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 931a53be7..bd00b9d11 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -73,9 +73,10 @@ #define TU_MESS_FAILED() do {} while (0) #endif - // Custom defined application function +// Custom defined application function #ifdef CFG_TUSB_DEBUG_BREAKPOINT -#define TU_BREAKPOINT() do { void CFG_TUSB_DEBUG_BREAKPOINT(void); CFG_TUSB_DEBUG_BREAKPOINT(); } while (0) + extern void CFG_TUSB_DEBUG_BREAKPOINT(void); + #define TU_BREAKPOINT() CFG_TUSB_DEBUG_BREAKPOINT() // Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7, M33. M55 #elif defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) || \ -- cgit v1.3.1 From cec0ee53f60ed28d7c324f40cbebd0b677d94eb1 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 23:06:38 +0700 Subject: make membrowse command more visible --- .github/workflows/build_util.yml | 1 + hw/bsp/family_support.cmake | 20 +++++++++----------- 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 1a119b132..595129443 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -83,6 +83,7 @@ jobs: env: MEMBROWSE_API_KEY: ${{ secrets.MEMBROWSE_API_KEY }} run: | + # if code-changed is false --> there is no elf -> membrowse target upload with --indetical flag BUILD_PY_ARGS="-s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }}" python tools/build.py $BUILD_PY_ARGS --target examples-membrowse-upload -j 1 ${{ matrix.arg }} shell: bash diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 80ebb7bef..0130fb656 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -316,35 +316,33 @@ for symbol in $ld_symbols; do \ ld_defs=\"$ld_defs --def $symbol\"; \ done; \ ld_defs=\"$(echo \"$ld_defs\" | xargs)\"") - - set(MEMBROWSE_CMD + set(MEMBROWSE_PREPARE_CMD "if [ -f \"${TARGET_ELF_PATH}\" ]; then \ ${MEMBROWSE_LD_SCRIPTS_CMD}; \ ${MEMBROWSE_LD_DEFS_CMD}; \ - echo ld_scripts=\"$ld_scripts\"; \ - echo ld_defs=\"$ld_defs\"; \ if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ - ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\" $ld_defs --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} \\\"${TARGET_ELF_PATH}\\\" \\\"$ld_scripts\\\" $ld_defs --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}\"; \ else \ - ${MEMBROWSE_EXE} report ${OPTION} \"${TARGET_ELF_PATH}\" \"$ld_scripts\" $ld_defs; \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} \\\"${TARGET_ELF_PATH}\\\" \\\"$ld_scripts\\\" $ld_defs\"; \ fi; \ else \ if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ - ${MEMBROWSE_EXE} report ${OPTION} --identical --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}; \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} --identical --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}\"; \ else \ - ${MEMBROWSE_EXE} report ${OPTION} --identical; \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} --identical\"; \ fi; \ -fi") +fi; \ +echo \"$MEMBROWSE_CMD\"") add_custom_target(${TARGET}-membrowse DEPENDS ${TARGET} - COMMAND ${CMAKE_COMMAND} -E env MEMBROWSE_UPLOAD=0 bash -lc "${MEMBROWSE_CMD}" + COMMAND ${CMAKE_COMMAND} -E env MEMBROWSE_UPLOAD=0 bash -lc "${MEMBROWSE_PREPARE_CMD}; eval \"$MEMBROWSE_CMD\"" VERBATIM ) set_property(TARGET ${TARGET}-membrowse PROPERTY FOLDER ${TARGET}) add_custom_target(${TARGET}-membrowse-upload - COMMAND ${CMAKE_COMMAND} -E env MEMBROWSE_UPLOAD=1 bash -lc "${MEMBROWSE_CMD}" + COMMAND ${CMAKE_COMMAND} -E env MEMBROWSE_UPLOAD=1 bash -lc "${MEMBROWSE_PREPARE_CMD}; eval \"$MEMBROWSE_CMD\"" VERBATIM ) -- cgit v1.3.1 From b5c84aa140773009926fce97e207075fb11682ed Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Feb 2026 23:44:39 +0700 Subject: device/msc: only defer prepare_cbw() from STATUS_SENT when EP OUT stalled --- src/class/msc/msc_device.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index be40c37e7..3766e3a25 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -121,12 +121,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool send_csw(mscd_interface_t* p_msc) { TU_ATTR_ALWAYS_INLINE static inline bool prepare_cbw(mscd_interface_t* p_msc) { uint8_t rhport = p_msc->rhport; p_msc->stage = MSC_STAGE_CMD; - // Skip command stage until Clear Stall request if endpoint is stalled - if (!usbd_edpt_stalled(rhport, p_msc->ep_out)) { - return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t), false); - } else { - return true; - } + return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t), false); } static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { @@ -651,7 +646,11 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t break; } - TU_ASSERT(prepare_cbw(p_msc)); + if (!usbd_edpt_stalled(rhport, p_msc->ep_out)) { + TU_ASSERT(prepare_cbw(p_msc)); + } else { + p_msc->stage = MSC_STAGE_CMD; + } } else { // Any xfer ended here is considered unknown error, ignore it TU_LOG1(" Warning expect SCSI Status but received unknown data\r\n"); -- cgit v1.3.1 From 4a5077a1aa78d2359f26b0c44ced025db45d77c2 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Feb 2026 00:10:18 +0700 Subject: membrowse upload continue on error --- .github/workflows/build_util.yml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 595129443..138673bcc 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -80,10 +80,11 @@ jobs: - name: Membrowse Upload if: inputs.toolchain != 'esp-idf' && inputs.upload-membrowse == true + continue-on-error: true # have server busy issue with membrowse env: MEMBROWSE_API_KEY: ${{ secrets.MEMBROWSE_API_KEY }} run: | - # if code-changed is false --> there is no elf -> membrowse target upload with --indetical flag + # if code-changed is false --> there is no elf -> membrowse target upload with --identical flag BUILD_PY_ARGS="-s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }}" python tools/build.py $BUILD_PY_ARGS --target examples-membrowse-upload -j 1 ${{ matrix.arg }} shell: bash -- cgit v1.3.1 From 39bc5cd933091c9c28b0f0bd468526d3d5d946a3 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Feb 2026 00:22:21 +0700 Subject: fix ci --- .github/workflows/build.yml | 8 ++++---- .github/workflows/build_util.yml | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 412d52bb8..e0997c256 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -98,7 +98,7 @@ jobs: code-metrics: needs: [ check-paths, cmake ] - if: needs.check-paths.outputs.code_changed == true + if: needs.check-paths.outputs.code_changed == 'true' runs-on: ubuntu-latest permissions: pull-requests: write @@ -196,7 +196,7 @@ jobs: # --------------------------------------- build-os: needs: [ check-paths ] - if: needs.check-paths.outputs.code_changed == true + if: needs.check-paths.outputs.code_changed == 'true' uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -240,7 +240,7 @@ jobs: # --------------------------------------- hil-build: needs: [ check-paths, set-matrix ] - if: needs.check-paths.outputs.code_changed == true && github.repository_owner == 'hathach' + if: needs.check-paths.outputs.code_changed == 'true' && github.repository_owner == 'hathach' uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -301,7 +301,7 @@ jobs: hil-hfp: needs: [ check-paths ] if: | - needs.check-paths.outputs.code_changed == true && + needs.check-paths.outputs.code_changed == 'true' && github.repository_owner == 'hathach' && !(github.event_name == 'pull_request' && github.event.pull_request.head.repo.fork == true) runs-on: [ self-hosted, Linux, X64, hifiphile ] diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 138673bcc..7b1972fc9 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -34,7 +34,7 @@ on: type: boolean code-changed: required: false - default: false + default: true type: boolean jobs: -- cgit v1.3.1 From c59447faa8935124bdeebeafbcb8ba65f7fc93f0 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Feb 2026 11:30:40 +0700 Subject: clean up --- .circleci/config2.yml | 9 ++- .github/actions/get_deps/action.yml | 1 - .github/workflows/build.yml | 50 ----------------- .github/workflows/build_util.yml | 6 +- .github/workflows/membrowse-report.yml | 100 --------------------------------- .idea/cmake.xml | 1 + 6 files changed, 11 insertions(+), 156 deletions(-) delete mode 100644 .github/workflows/membrowse-report.yml diff --git a/.circleci/config2.yml b/.circleci/config2.yml index 352d0f4fa..900994a73 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -110,7 +110,7 @@ commands: no_output_timeout: 20m command: | if [ << parameters.toolchain >> == esp-idf ]; then - docker run --rm -v $PWD:/project -w /project espressif/idf:v5.3.2 python tools/build.py << parameters.build-args >> << parameters.family >> + docker run --rm -v $PWD:/project -w /project espressif/idf:v5.3.2 python tools/build.py << parameters.build-args >> --target all << parameters.family >> else # Toolchain option default is gcc if [ << parameters.toolchain >> == arm-clang ]; then @@ -124,7 +124,12 @@ commands: # circleci docker return $nproc as 36 core, limit parallel to 4 (resource-class = large) # Required for IAR, also prevent crashed/killed by docker - python tools/build.py -s << parameters.build-system >> $TOOLCHAIN_OPTION -j 4 << parameters.build-args >> << parameters.family >> + BUILD_PY_ARGS="-s << parameters.build-system >> $TOOLCHAIN_OPTION -j 4 << parameters.build-args >>" + python tools/build.py $BUILD_PY_ARGS --target all << parameters.family >> + + if [ << parameters.build-system >> == "cmake" ]; then + python tools/build.py $BUILD_PY_ARGS --target tinyusb_metrics << parameters.family >> + fi fi # Only collect and persist metrics for cmake builds (excluding esp-idf and --one-random) diff --git a/.github/actions/get_deps/action.yml b/.github/actions/get_deps/action.yml index 8ea36ce78..bbe94f0fa 100644 --- a/.github/actions/get_deps/action.yml +++ b/.github/actions/get_deps/action.yml @@ -23,7 +23,6 @@ runs: wget $NINJA_URL -O ninja-linux.zip unzip ninja-linux.zip -d ninja-bin pip install membrowse - #echo >> $GITHUB_PATH "$HOME/.local/bin" echo >> $GITHUB_PATH "${{ github.workspace }}/ninja-bin" shell: bash diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index e0997c256..9d8b90f5a 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -336,53 +336,3 @@ jobs: - name: Test on actual hardware (hardware in the loop) run: python3 test/hil/hil_test.py hfp.json - - # --------------------------------------- - # Membrowse Memory Analysis - # Push: always runs (uses identical for doc-only to maintain commit chain) - # PR: only runs if code changed (doc-only PRs skip entirely) - # --------------------------------------- -# membrowse: -# needs: [check-paths, cmake] -# if: | -# always() && !cancelled() && ( -# github.event_name == 'push' || -# github.event_name == 'release' || -# github.event_name == 'workflow_dispatch' || -# (github.event_name == 'pull_request' && needs.check-paths.outputs.code_changed == 'true') -# ) -# permissions: -# contents: read -# actions: read -# uses: ./.github/workflows/membrowse-report.yml -# with: -# code_changed: ${{ needs.check-paths.outputs.code_changed == 'true' || github.event_name == 'release' || github.event_name == 'workflow_dispatch' }} -# secrets: inherit -# -# membrowse-comment: -# needs: membrowse -# # skip membrowse comment since it is too verbal -# if: false && github.event_name == 'pull_request' -# runs-on: ubuntu-latest -# permissions: -# contents: read -# actions: read -# steps: -# - name: Checkout repository -# uses: actions/checkout@v6 -# -# - name: Download report artifacts -# id: download -# uses: actions/download-artifact@v5 -# with: -# pattern: membrowse-report-* -# path: reports -# merge-multiple: true -# continue-on-error: true -# -# - name: Upload Membrowse Comment Artifact -# if: steps.download.outcome == 'success' -# uses: actions/upload-artifact@v5 -# with: -# name: membrowse-comment -# path: reports/ diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 7b1972fc9..b0adec979 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -67,7 +67,7 @@ jobs: IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} run: | if [ "${{ inputs.toolchain }}" == "esp-idf" ]; then - docker run --rm -e MEMBROWSE_API_KEY="$MEMBROWSE_API_KEY" -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py -T all ${{ matrix.arg }} + docker run --rm -e MEMBROWSE_API_KEY="$MEMBROWSE_API_KEY" -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py --target all ${{ matrix.arg }} else BUILD_PY_ARGS="-s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }}" python tools/build.py $BUILD_PY_ARGS --target all ${{ matrix.arg }} @@ -90,14 +90,14 @@ jobs: shell: bash - name: Upload Artifacts for Metrics - if: ${{ inputs.upload-metrics }} + if: inputs.upload-metrics == true && inputs.code-changed == true uses: actions/upload-artifact@v5 with: name: metrics-${{ matrix.arg }} path: cmake-build/cmake-build-*/metrics.json - name: Upload Artifacts for Hardware Testing - if: ${{ inputs.upload-artifacts }} + if: inputs.upload-artifacts == true && inputs.code-changed == true uses: actions/upload-artifact@v5 with: name: binaries-${{ matrix.arg }} diff --git a/.github/workflows/membrowse-report.yml b/.github/workflows/membrowse-report.yml deleted file mode 100644 index f86b047df..000000000 --- a/.github/workflows/membrowse-report.yml +++ /dev/null @@ -1,100 +0,0 @@ -name: Membrowse Memory Report - -on: - workflow_call: - inputs: - code_changed: - description: 'Whether code paths changed (true) or doc-only (false)' - type: boolean - required: true - -permissions: - contents: read - actions: read - -jobs: - load-targets: - runs-on: ubuntu-latest - outputs: - targets: ${{ steps.load.outputs.targets }} - steps: - - name: Checkout repository - uses: actions/checkout@v6 - - - name: Load target matrix - id: load - run: echo "targets=$(jq -c '.targets' .github/membrowse-targets.json)" >> $GITHUB_OUTPUT - - analyze: - needs: [load-targets] - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - include: ${{ fromJson(needs.load-targets.outputs.targets) }} - - steps: - - name: Checkout repository - uses: actions/checkout@v6 - with: - fetch-depth: 0 - - # Download artifacts when code changed (build artifacts available) - - name: Download build artifacts - if: inputs.code_changed - id: download - uses: actions/download-artifact@v5 - with: - pattern: binaries-* - path: cmake-build - merge-multiple: true - continue-on-error: true - - - name: Restore linker scripts - if: inputs.code_changed - run: cp -r cmake-build/hw . 2>/dev/null || true - - - name: Check if ELF exists - id: check-elf - run: | - if [ -f "cmake-build/cmake-build-${{ matrix.board }}/device/${{ matrix.example }}/${{ matrix.example }}.elf" ]; then - echo "exists=true" >> $GITHUB_OUTPUT - else - echo "exists=false" >> $GITHUB_OUTPUT - fi - - # Run with actual ELF analysis when build artifacts available - - name: Run Membrowse Analysis - if: steps.check-elf.outputs.exists == 'true' - id: membrowse - continue-on-error: true - uses: membrowse/membrowse-action@v1 - with: - target_name: ${{ matrix.port }}-${{ matrix.board }}-${{ matrix.example }} - elf: cmake-build/cmake-build-${{ matrix.board }}/device/${{ matrix.example }}/${{ matrix.example }}.elf - ld: ${{ matrix.ld }} - linker_vars: ${{ matrix.linker_vars || '' }} - api_key: ${{ secrets.MEMBROWSE_API_KEY }} - api_url: ${{ vars.MEMBROWSE_API_URL }} - verbose: INFO - - # Run with identical=true when no ELF (doc-only push) - # Preserves the chain of commits in membrowse tracking - - name: Run Membrowse Identical Report - if: steps.check-elf.outputs.exists == 'false' - id: membrowse-identical - continue-on-error: true - uses: membrowse/membrowse-action@v1 - with: - target_name: ${{ matrix.port }}-${{ matrix.board }}-${{ matrix.example }} - identical: true - api_key: ${{ secrets.MEMBROWSE_API_KEY }} - api_url: ${{ vars.MEMBROWSE_API_URL }} - verbose: INFO - - - name: Upload report artifact - if: steps.membrowse.outcome == 'success' || steps.membrowse-identical.outcome == 'success' - uses: actions/upload-artifact@v5 - with: - name: membrowse-report-${{ matrix.port }}-${{ matrix.board }}-${{ matrix.example }} - path: ${{ steps.membrowse.outputs.report_path || steps.membrowse-identical.outputs.report_path }} diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 5f9e1acd2..822a70236 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -171,6 +171,7 @@ + -- cgit v1.3.1 From 8a6012b0096cb71bb4cfaaa36813de4ac5003c18 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Feb 2026 13:32:00 +0700 Subject: refactor build scripts to support multiple build targets and improve argument handling --- .circleci/config2.yml | 7 +++--- .github/workflows/build_util.yml | 7 +++--- tools/build.py | 50 ++++++++++++++++++++-------------------- 3 files changed, 31 insertions(+), 33 deletions(-) diff --git a/.circleci/config2.yml b/.circleci/config2.yml index 900994a73..a31b0a818 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -124,12 +124,11 @@ commands: # circleci docker return $nproc as 36 core, limit parallel to 4 (resource-class = large) # Required for IAR, also prevent crashed/killed by docker - BUILD_PY_ARGS="-s << parameters.build-system >> $TOOLCHAIN_OPTION -j 4 << parameters.build-args >>" - python tools/build.py $BUILD_PY_ARGS --target all << parameters.family >> - + BUILD_PY_ARGS="-s << parameters.build-system >> $TOOLCHAIN_OPTION -j 4 << parameters.build-args >> --target all" if [ << parameters.build-system >> == "cmake" ]; then - python tools/build.py $BUILD_PY_ARGS --target tinyusb_metrics << parameters.family >> + BUILD_PY_ARGS="$BUILD_PY_ARGS --target tinyusb_metrics" fi + python tools/build.py $BUILD_PY_ARGS << parameters.family >> fi # Only collect and persist metrics for cmake builds (excluding esp-idf and --one-random) diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index b0adec979..6863ebdf2 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -69,12 +69,11 @@ jobs: if [ "${{ inputs.toolchain }}" == "esp-idf" ]; then docker run --rm -e MEMBROWSE_API_KEY="$MEMBROWSE_API_KEY" -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py --target all ${{ matrix.arg }} else - BUILD_PY_ARGS="-s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }}" - python tools/build.py $BUILD_PY_ARGS --target all ${{ matrix.arg }} - + BUILD_PY_ARGS="-s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ inputs.build-options }} --target all" if [ "${{ inputs.upload-metrics }}" = "true" ]; then - python tools/build.py $BUILD_PY_ARGS --target tinyusb_metrics ${{ matrix.arg }} + BUILD_PY_ARGS="$BUILD_PY_ARGS --target tinyusb_metrics" fi + python tools/build.py $BUILD_PY_ARGS ${{ matrix.arg }} fi shell: bash diff --git a/tools/build.py b/tools/build.py index d26028c51..3c5c3c077 100755 --- a/tools/build.py +++ b/tools/build.py @@ -24,7 +24,6 @@ build_separator = '-' * 95 build_status = [STATUS_OK, STATUS_FAILED, STATUS_SKIPPED] verbose = False -clean_build = False parallel_jobs = os.cpu_count() # CI board control lists (used when running under CI) @@ -106,7 +105,7 @@ def print_build_result(board, build_target, status, duration): # ----------------------------- # CMake # ----------------------------- -def cmake_board(board, build_args, build_flags_on, build_target): +def cmake_board(board, build_args, build_flags_on, build_targets): ret = [0, 0, 0] start_time = time.monotonic() @@ -135,33 +134,36 @@ def cmake_board(board, build_args, build_flags_on, build_target): f'-DBOARD={board}', '-DCMAKE_BUILD_TYPE=MinSizeRel', '-DLINKERMAP_OPTION=-q -f tinyusb/src', *build_args, *build_flags]) if rcmd.returncode == 0: - if clean_build: - run_cmd(["cmake", "--build", build_dir, '--target', 'clean']) - cmd = ["cmake", "--build", build_dir, '--target', build_target, '--parallel', str(parallel_jobs)] - rcmd = run_cmd(cmd) + cmd = ["cmake", "--build", build_dir, '--parallel', str(parallel_jobs)] + for target in build_targets: + rcmd = run_cmd(cmd + ['--target', target]) + if rcmd.returncode != 0: + break ret[0 if rcmd.returncode == 0 else 1] += 1 - print_build_result(board, build_target, 0 if ret[1] == 0 else 1, time.monotonic() - start_time) + print_build_result(board, ','.join(build_targets), 0 if ret[1] == 0 else 1, time.monotonic() - start_time) return ret # ----------------------------- # Make # ----------------------------- -def make_one_example(example, board, make_option, build_target): +def make_one_example(example, board, make_option, build_targets): # Check if board is skipped if build_utils.skip_example(example, board): print_build_result(board, example, 2, '-') r = 2 else: start_time = time.monotonic() - make_args = ["make", "-C", f"examples/{example}", f"BOARD={board}", '-j', str(parallel_jobs)] + make_cmd = ["make", "-C", f"examples/{example}", f"BOARD={board}", '-j', str(parallel_jobs)] if make_option: - make_args += shlex.split(make_option) - if clean_build: - run_cmd(make_args + ["clean"]) - build_result = run_cmd(make_args + [build_target]) - r = 0 if build_result.returncode == 0 else 1 + make_cmd += shlex.split(make_option) + r = 0 + for target in build_targets: + build_result = run_cmd(make_cmd + [target]) + if build_result.returncode != 0: + r = 1 + break print_build_result(board, example, r, time.monotonic() - start_time) ret = [0, 0, 0] @@ -169,7 +171,7 @@ def make_one_example(example, board, make_option, build_target): return ret -def make_board(board, build_args, build_target): +def make_board(board, build_args, build_targets): print(build_separator) family = find_family(board); all_examples = get_examples(family) @@ -180,7 +182,7 @@ def make_board(board, build_args, build_target): final_status = 2 else: with Pool(processes=os.cpu_count()) as pool: - pool_args = list((map(lambda e, b=board, o=f"{build_args}", t=build_target: [e, b, o, t], all_examples))) + pool_args = list((map(lambda e, b=board, o=f"{build_args}", t=build_targets: [e, b, o, t], all_examples))) r = pool.starmap(make_one_example, pool_args) # sum all element of same index (column sum) ret = list(map(sum, list(zip(*r)))) @@ -192,16 +194,16 @@ def make_board(board, build_args, build_target): # ----------------------------- # Build Family # ----------------------------- -def build_boards_list(boards, build_defines, build_system, build_flags_on, build_target): +def build_boards_list(boards, build_defines, build_system, build_flags_on, build_targets): ret = [0, 0, 0] for b in boards: r = [0, 0, 0] if build_system == 'cmake': build_args = [f'-D{d}' for d in build_defines] - r = cmake_board(b, build_args, build_flags_on, build_target) + r = cmake_board(b, build_args, build_flags_on, build_targets) elif build_system == 'make': build_args = ' '.join(f'{d}' for d in build_defines) - r = make_board(b, build_args, build_target) + r = make_board(b, build_args, build_targets) ret[0] += r[0] ret[1] += r[1] ret[2] += r[2] @@ -251,13 +253,11 @@ def get_family_boards(family, one_random, one_first): # ----------------------------- def main(): global verbose - global clean_build global parallel_jobs parser = argparse.ArgumentParser() parser.add_argument('families', nargs='*', default=[], help='Families to build') parser.add_argument('-b', '--board', action='append', default=[], help='Boards to build') - parser.add_argument('-c', '--clean', action='store_true', default=False, help='Clean before build') parser.add_argument('-t', '--toolchain', default='gcc', help='Toolchain to use, default is gcc') parser.add_argument('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') parser.add_argument('-D', '--define-symbol', action='append', default=[], help='Define to pass to build system') @@ -267,7 +267,8 @@ def main(): parser.add_argument('--one-first', action='store_true', default=False, help='Build only the first board (alphabetical) of each specified family') parser.add_argument('-j', '--jobs', type=int, default=os.cpu_count(), help='Number of jobs to run in parallel') - parser.add_argument('-T', '--target', default='all', help='Build target to use, default is all') + parser.add_argument('-T', '--target', action='append', default=[], + help='Build target to use, may be specified multiple times (default: all)') parser.add_argument('-v', '--verbose', action='store_true', help='Verbose output') args = parser.parse_args() @@ -279,9 +280,8 @@ def main(): build_flags_on = args.build_flags_on one_random = args.one_random one_first = args.one_first - build_target = args.target + build_targets = args.target if args.target else ['all'] verbose = args.verbose - clean_build = args.clean parallel_jobs = args.jobs build_defines.append(f'TOOLCHAIN={toolchain}') @@ -310,7 +310,7 @@ def main(): all_boards.extend(get_family_boards(f, one_random, one_first)) # build all boards - result = build_boards_list(all_boards, build_defines, build_system, build_flags_on, build_target) + result = build_boards_list(all_boards, build_defines, build_system, build_flags_on, build_targets) total_time = time.monotonic() - total_time print(build_separator) -- cgit v1.3.1 From 05cdaf0ad09cc6ed2ecc54767f9873eef3bfcdfd Mon Sep 17 00:00:00 2001 From: Michael Rogov Papernov Date: Thu, 12 Feb 2026 14:54:45 +0000 Subject: fix ld symbols extraction --- hw/bsp/family_support.cmake | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 0130fb656..f97518faf 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -310,7 +310,7 @@ while [ -n \"$pending_ld_scripts\" ]; do \ done; \ ld_scripts=\"$(echo \"$all_ld_scripts\" | xargs)\"") set(MEMBROWSE_LD_DEFS_CMD - "ld_symbols=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?<=-Wl,--defsym=)[^[:space:]]+' | xargs)\"; \ + "ld_symbols=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?<=--defsym=)[^[:space:]]+' | xargs)\"; \ ld_defs=\"\"; \ for symbol in $ld_symbols; do \ ld_defs=\"$ld_defs --def $symbol\"; \ -- cgit v1.3.1 From a6d4c6d022a3dc597c24f2e312993046345683ad Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Feb 2026 23:42:34 +0700 Subject: change membrowse target to board/target and remove redundant continue-on-error directive fix defsym can be followed by = or , --- .github/workflows/build_util.yml | 1 - hw/bsp/family_support.cmake | 6 +++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 6863ebdf2..d03c9af81 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -79,7 +79,6 @@ jobs: - name: Membrowse Upload if: inputs.toolchain != 'esp-idf' && inputs.upload-membrowse == true - continue-on-error: true # have server busy issue with membrowse env: MEMBROWSE_API_KEY: ${{ secrets.MEMBROWSE_API_KEY }} run: | diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index f97518faf..699afda92 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -310,7 +310,7 @@ while [ -n \"$pending_ld_scripts\" ]; do \ done; \ ld_scripts=\"$(echo \"$all_ld_scripts\" | xargs)\"") set(MEMBROWSE_LD_DEFS_CMD - "ld_symbols=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?<=--defsym=)[^[:space:]]+' | xargs)\"; \ + "ld_symbols=\"$(${CMAKE_MAKE_PROGRAM} -C ${CMAKE_BINARY_DIR} -t commands ${TARGET} | grep -oP '(?<=--defsym[=,])[^[:space:]]+' | xargs)\"; \ ld_defs=\"\"; \ for symbol in $ld_symbols; do \ ld_defs=\"$ld_defs --def $symbol\"; \ @@ -321,13 +321,13 @@ ld_defs=\"$(echo \"$ld_defs\" | xargs)\"") ${MEMBROWSE_LD_SCRIPTS_CMD}; \ ${MEMBROWSE_LD_DEFS_CMD}; \ if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ - MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} \\\"${TARGET_ELF_PATH}\\\" \\\"$ld_scripts\\\" $ld_defs --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}\"; \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} \\\"${TARGET_ELF_PATH}\\\" \\\"$ld_scripts\\\" $ld_defs --upload --github --target-name ${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}\"; \ else \ MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} \\\"${TARGET_ELF_PATH}\\\" \\\"$ld_scripts\\\" $ld_defs\"; \ fi; \ else \ if [ \"$MEMBROWSE_UPLOAD\" = \"1\" ]; then \ - MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} --identical --upload --github --target-name ${FAMILY}/${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}\"; \ + MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} --identical --upload --github --target-name ${BOARD}/${TARGET} --api-key $ENV{MEMBROWSE_API_KEY}\"; \ else \ MEMBROWSE_CMD=\"${MEMBROWSE_EXE} report ${OPTION} --identical\"; \ fi; \ -- cgit v1.3.1 From ace6d295a9f672dcf21cac75ca92c7cc1f182151 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 13 Feb 2026 00:27:05 +0700 Subject: fix stm32u545 makefile missing hcd --- hw/bsp/stm32u5/family.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 47aed10a9..0acffa67b 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -40,6 +40,7 @@ SRC_C += \ ifneq ($(filter stm32u545xx stm32u535xx,$(MCU_VARIANT)),) SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ src/portable/st/stm32_fsdev/fsdev_common.c else SRC_C += \ -- cgit v1.3.1 From 8f14cf4bfa061690084c7c32b3f8b70301f5e0ff Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 13 Feb 2026 19:45:09 +0700 Subject: add CFG_TUD_VBUS_SENSE, that could allow to skip tud_configure() for fixed vbus sensing simplify dwc2_stm32_gccfg_cfg() using guid value --- .../stm32h7rs/boards/stm32h7s3nucleo/board.cmake | 2 + hw/bsp/stm32h7rs/family.cmake | 2 +- src/device/usbd.h | 2 + src/portable/synopsys/dwc2/dcd_dwc2.c | 15 ++- src/portable/synopsys/dwc2/dwc2_info.md | 116 ++++++++-------- src/portable/synopsys/dwc2/dwc2_info.py | 10 +- src/portable/synopsys/dwc2/dwc2_stm32.h | 146 ++++++--------------- src/portable/synopsys/dwc2/dwc2_type.h | 9 +- src/tusb_option.h | 11 +- 9 files changed, 131 insertions(+), 182 deletions(-) diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake index 7b3456585..189c175dd 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake @@ -2,6 +2,8 @@ set(MCU_VARIANT stm32h7s3xx) set(JLINK_DEVICE stm32h7s3l8) set(LD_FILE_Clang ${LD_FILE_GNU}) +set(RHPORT_DEVICE 1) +set(RHPORT_HOST 1) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/stm32h7rs/family.cmake b/hw/bsp/stm32h7rs/family.cmake index 1fd1cb057..3b9dbf5cf 100644 --- a/hw/bsp/stm32h7rs/family.cmake +++ b/hw/bsp/stm32h7rs/family.cmake @@ -24,7 +24,7 @@ if (NOT DEFINED RHPORT_DEVICE) set(RHPORT_DEVICE 1) endif () if (NOT DEFINED RHPORT_HOST) - set(RHPORT_HOST 1) + set(RHPORT_HOST 0) endif () if (NOT DEFINED RHPORT_SPEED) diff --git a/src/device/usbd.h b/src/device/usbd.h index 7d7604c81..eaf07b81e 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -44,6 +44,8 @@ typedef struct { bool vbus_sensing; // Vbus pin is used for device connection detection, mandatory for tud_umount_cb() } tud_configure_dwc2_t; +#define TUD_CONFIGURE_DWC2_DEFAULT { .bm_double_buffered = 0, .vbus_sensing = CFG_TUD_VBUS_SENSE } + typedef union { tud_configure_dwc2_t dwc2; } tud_configure_param_t; diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 36cb763aa..a6a598dbf 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -77,10 +77,7 @@ CFG_TUD_MEM_SECTION static struct { TUD_EPBUF_DEF(setup_packet, 8); } _dcd_usbbuf; -static tud_configure_dwc2_t _tud_cfg = { - .bm_double_buffered = 0, - .vbus_sensing = false -}; +static tud_configure_dwc2_t _tud_cfg = TUD_CONFIGURE_DWC2_DEFAULT; TU_ATTR_ALWAYS_INLINE static inline uint8_t dwc2_ep_count(const dwc2_regs_t* dwc2) { #if TU_CHECK_MCU(OPT_MCU_GD32VF103) @@ -473,10 +470,14 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // Force device mode dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_FHMOD) | GUSBCFG_FDMOD; - // Clear A override, force B Valid if Vbus sensing is not used - dwc2->gotgctl = (dwc2->gotgctl & ~GOTGCTL_AVALOEN) | (_tud_cfg.vbus_sensing ? 0 : GOTGCTL_BVALOEN | GOTGCTL_BVALOVAL); + // OTG Ctrl + uint32_t gotgctl = dwc2->gotgctl & ~GOTGCTL_AVALOEN; // Clear A-override + if (!_tud_cfg.vbus_sensing) { + gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_BVALOVAL; // force B Valid if not sensing VBus + } + dwc2->gotgctl = gotgctl; -#ifdef TUP_USBIP_DWC2_STM32 + #ifdef TUP_USBIP_DWC2_STM32 dwc2_stm32_gccfg_cfg(dwc2, _tud_cfg.vbus_sensing, false); #endif diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index f655e4dba..f83007b8c 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | AT32 F405 FS | AT32 F405 HS | AT32 F415 | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | nRF54 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5/H7RS/N6 HS | XMC4500 | GD32VF103 | -|:---------------------------|:---------------|:---------------|:------------|:----------------|:-------------|:--------------|:-------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:---------------------|:-------------|:------------| -| GUID | 0x00002000 | 0x00000000 | 0x00001000 | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00AEC000 | 0x00001000 | -| GSNPSID | 0x4F54400A | 0x4F54400A | 0x4F54400A | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54430A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54292A | 0x00000000 | -| - specs version | 4.00a | 4.00a | 4.00a | 2.80a | 3.30a | 4.00a | 4.00a | 4.30a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 2.92a | 0.00W | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0xAA555000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228FDD00 | 0x229FDDD0 | 0x228DCD00 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x228BFC72 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228F5930 | 0x00000000 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | Slave only | DMA internal | Slave only | DMA internal | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | Slave only | -| - single_point | hub | hub | hub | hub | hub | n/a | hub | n/a | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | n/a | hub | -| - hs_phy_type | n/a | UTMI+/ULPI | n/a | UTMI+ | n/a | n/a | UTMI+/ULPI | UTMI+ | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Shared ULPI | n/a | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | Dedicated | n/a | -| - num_dev_ep | 7 | 7 | 3 | 7 | 6 | 6 | 15 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | -| - num_host_ch | 15 | 15 | 7 | 7 | 13 | 7 | 15 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 13 | 0 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - mul_proc_intrpt | 0 | 1 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 8 | 8 | 8 | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - ptx_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x020004E8 | 0x03F006E8 | 0x020004E8 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x0BEAC0E8 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | -| - xfer_size_width | 8 | 8 | 8 | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | -| - packet_size_width | 6 | 6 | 6 | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - i2c_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | -| - vendor_ctrl_itf | 0 | 1 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 512 | 1008 | 512 | 4080 | 498 | 200 | 896 | 3050 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 634 | 0 | -| GHWCFG4 | 0x1FF0A020 | 0x1FF0A020 | 0x0000000F | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x1E10AA60 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | -| - num_dev_period_in_ep | 0 | 0 | 15 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - ahb_freq_min | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - enhanced_lpm_support | 1 | 1 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - phy_data_width | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - vbus_valid_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - a_valid_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - b_valid_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - session_end_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - dedicated_fifos | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - num_dev_in_eps | 7 | 7 | 0 | 7 | 6 | 4 | 7 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | -| - dma_desc_enable | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | -| - dma_desc_dynamic | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | +| | AT32 F405 FS | AT32 F405 HS | AT32 F415 | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | nRF54 | ST F407/429 HS | ST F207/F407/411/429 FS | ST L476 FS | ST F412/76x FS | ST F76x HS | ST H743/H750 | ST F723/L4P5 FS | ST F723 HS | ST H7RS FS | ST U5A5/H7RS/N6 HS | XMC4500 | GD32VF103 | +|:---------------------------|:---------------|:---------------|:------------|:----------------|:-------------|:--------------|:-------------|:-------------|:-----------------|:--------------------------|:-------------|:-----------------|:-------------|:---------------|:------------------|:-------------|:-------------|:---------------------|:-------------|:------------| +| GUID | 0x00002000 | 0x00000000 | 0x00001000 | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001100 | 0x00001200 | 0x00002000 | 0x00002000 | 0x00002100 | 0x00002300 | 0x00003000 | 0x00003100 | 0x00004000 | 0x00005000 | 0x00AEC000 | 0x00001000 | +| GSNPSID | 0x4F54400A | 0x4F54400A | 0x4F54400A | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54430A | 0x4F54281A | 0x4F54281A | 0x4F54310A | 0x4F54320A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54330A | 0x4F54411A | 0x4F54411A | 0x4F54292A | 0x00000000 | +| - specs version | 4.00a | 4.00a | 4.00a | 2.80a | 3.30a | 4.00a | 4.00a | 4.30a | 2.81a | 2.81a | 3.10a | 3.20a | 3.20a | 3.30a | 3.30a | 3.30a | 4.11a | 4.11a | 2.92a | 0.00W | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0xAA555000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228FDD00 | 0x229FDDD0 | 0x228DCD00 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x228BFC72 | 0x229ED590 | 0x229DCD20 | 0x229ED520 | 0x229ED520 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x229FE1D0 | 0x229ED522 | 0x228FE052 | 0x228F5930 | 0x00000000 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | Slave only | DMA internal | Slave only | DMA internal | DMA internal | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | Slave only | Slave only | DMA internal | DMA internal | Slave only | DMA internal | Slave only | DMA internal | DMA internal | Slave only | +| - single_point | hub | hub | hub | hub | hub | n/a | hub | n/a | hub | n/a | n/a | n/a | hub | hub | n/a | hub | n/a | hub | n/a | hub | +| - hs_phy_type | n/a | UTMI+/ULPI | n/a | UTMI+ | n/a | n/a | UTMI+/ULPI | UTMI+ | ULPI | n/a | n/a | n/a | ULPI | ULPI | n/a | UTMI+/ULPI | n/a | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Shared ULPI | n/a | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | Dedicated | n/a | +| - num_dev_ep | 7 | 7 | 3 | 7 | 6 | 6 | 15 | 15 | 5 | 3 | 5 | 5 | 8 | 8 | 5 | 8 | 5 | 8 | 6 | 0 | +| - num_host_ch | 15 | 15 | 7 | 7 | 13 | 7 | 15 | 15 | 11 | 7 | 11 | 11 | 15 | 15 | 11 | 15 | 11 | 15 | 13 | 0 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - mul_proc_intrpt | 0 | 1 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 8 | 8 | 8 | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - ptx_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x020004E8 | 0x03F006E8 | 0x020004E8 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x0BEAC0E8 | 0x03F403E8 | 0x020001E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03EED2E8 | 0x020081E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | +| - xfer_size_width | 8 | 8 | 8 | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | +| - packet_size_width | 6 | 6 | 6 | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - i2c_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | +| - vendor_ctrl_itf | 0 | 1 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 0 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 512 | 1008 | 512 | 4080 | 498 | 200 | 896 | 3050 | 1012 | 512 | 512 | 512 | 1006 | 952 | 512 | 1006 | 512 | 952 | 634 | 0 | +| GHWCFG4 | 0x1FF0A020 | 0x1FF0A020 | 0x0000000F | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x1E10AA60 | 0x17F00030 | 0x0FF08030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0x23F00030 | 0x1610B230 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | +| - num_dev_period_in_ep | 0 | 0 | 15 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - ahb_freq_min | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - enhanced_lpm_support | 1 | 1 | 0 | 0 | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - phy_data_width | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - vbus_valid_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - a_valid_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - b_valid_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - session_end_filter | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - dedicated_fifos | 1 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - num_dev_in_eps | 7 | 7 | 0 | 7 | 6 | 4 | 7 | 7 | 5 | 3 | 5 | 5 | 8 | 8 | 5 | 8 | 5 | 8 | 6 | 0 | +| - dma_desc_enable | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 1 | 0 | +| - dma_desc_dynamic | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 1 | 0 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 8fbbc00a0..e6601f482 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -16,14 +16,16 @@ dwc2_reg_value = { 'ESP32-S2/S3': [0, 0x4F54400A, 0, 0x224DD930, 0x0C804B5, 0xD3F0A030], 'ESP32-P4': [0, 0x4F54400A, 0, 0x215FFFD0, 0x03805EB5, 0xDFF1A030], 'nRF54': [0, 0x4F54430A, 0xAA555000, 0x228BFC72, 0x0BEAC0E8, 0x1E10AA60], - 'ST F207/F407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x020001E8, 0x0FF08030], + # ST sort by GUID 'ST F407/429 HS': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x03F403E8, 0x17F00030], + 'ST F207/F407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x020001E8, 0x0FF08030], + 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST F412/76x FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], - 'ST F723/L4P5 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], - 'ST F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x03EED2E8, 0x23F00030], 'ST F76x HS': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], - 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], + 'ST F723/L4P5 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], + 'ST F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x03EED2E8, 0x23F00030], + 'ST H7RS FS': [0x4000, 0x4F54411A, 0, 0x229ED522, 0x20081E8, 0x1610B230], 'ST U5A5/H7RS/N6 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030], 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 3da78b893..753917a20 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -308,129 +308,59 @@ static inline void dwc2_stm32_gccfg_cfg(dwc2_regs_t* dwc2, bool vbus_sensing, bo if (is_host) { vbus_sensing = false; } -#if CFG_TUSB_MCU == OPT_MCU_STM32F1 - // F1: Basic FS-only core, no VBUS sensing support - // Only PWRDWN bit is used (set in dwc2_phy_init) - (void) vbus_sensing; - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F2 || CFG_TUSB_MCU == OPT_MCU_STM32F4 - // F2/F4: Dual FS/HS with VBUSBSEN/VBUSASEN/NOVBUSSENS bits - if (is_host) { - dwc2->stm32_gccfg &= ~(STM32_GCCFG_NOVBUSSENS | STM32_GCCFG_VBUSBSEN | STM32_GCCFG_VBUSASEN); - } else { - if (vbus_sensing) { - dwc2->stm32_gccfg &= ~STM32_GCCFG_NOVBUSSENS; - dwc2->stm32_gccfg |= STM32_GCCFG_VBUSBSEN; - } else { - dwc2->stm32_gccfg |= STM32_GCCFG_NOVBUSSENS; - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBUSBSEN; - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBUSASEN; - } - } -#elif CFG_TUSB_MCU == OPT_MCU_STM32F7 - // F7: Enhanced FS/HS with battery charging detection - if (vbus_sensing) { - dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; - } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; - } -#elif CFG_TUSB_MCU == OPT_MCU_STM32H7 - if (vbus_sensing) { - dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; - } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; - } - -#elif CFG_TUSB_MCU == OPT_MCU_STM32H7RS - // H7FS: Port0: Basic FS-only core; Port1: femtoPHY - if ((uintptr_t)dwc2 == _dwc2_controller[0].reg_base) { - if (vbus_sensing) { - dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; - } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; - } - return; - } else { - // Uses VBVALEXTOEN and VBVALOVAL for external VBUS sensing override + uint32_t gccfg = dwc2->stm32_gccfg; + if (dwc2->guid < 0x2000) { + // use VBUSASEN/VBUSBSEN/NOVBUSSENS bits if (is_host) { - dwc2->stm32_gccfg |= STM32_GCCFG_PULLDOWNEN; - dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBDEN | STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); + gccfg &= ~(STM32_GCCFG_NOVBUSSENS | STM32_GCCFG_VBUSBSEN | STM32_GCCFG_VBUSASEN); } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_PULLDOWNEN; if (vbus_sensing) { - dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; - dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); + gccfg &= ~STM32_GCCFG_NOVBUSSENS; + gccfg |= STM32_GCCFG_VBUSBSEN; } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; - dwc2->stm32_gccfg |= STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL; + gccfg |= STM32_GCCFG_NOVBUSSENS; + gccfg &= ~(STM32_GCCFG_VBUSBSEN | STM32_GCCFG_VBUSASEN); } } - } - -#elif CFG_TUSB_MCU == OPT_MCU_STM32N6 - // N6: femtoPHY - // In this device, the software override is always active - (void) vbus_sensing; - if (is_host) { - dwc2->stm32_gccfg |= STM32_GCCFG_PULLDOWNEN; - dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALOVAL); - } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_PULLDOWNEN; - dwc2->stm32_gccfg |= STM32_GCCFG_VBVALOVAL; - } - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 - // L4: Low-power FS-only with VBUS detection - if (vbus_sensing) { - dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; - } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; - } - -#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 - #ifdef USB_OTG_FS - // U5: FS PHY (U575/585 have FS only) - if (vbus_sensing) { - dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; - } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; - } - #else - // U5: femtoPHY (U59x/5Ax/5Fx/5Gx have HS) - // Uses VBVALEXTOEN and VBVALOVAL for external VBUS sensing override - if (is_host) { - dwc2->stm32_gccfg |= STM32_GCCFG_PULLDOWNEN; - dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBDEN | STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); - } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_PULLDOWNEN; + } else if (dwc2->guid < 0x5000) { + // the later version uses VBDEN with battery charging detection if (vbus_sensing) { - dwc2->stm32_gccfg |= STM32_GCCFG_VBDEN; - dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); + gccfg |= STM32_GCCFG_VBDEN; } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBDEN; - dwc2->stm32_gccfg |= STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL; + gccfg &= ~STM32_GCCFG_VBDEN; } - } - #endif -#elif CFG_TUSB_MCU == OPT_MCU_STM32WBA - // WBA: femtoPHY - // In this device, the software override is always active - if (is_host) { - dwc2->stm32_gccfg |= STM32_GCCFG_PULLDOWNEN; - dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALOVAL); } else { - dwc2->stm32_gccfg &= ~STM32_GCCFG_PULLDOWNEN; - if (vbus_sensing) { - dwc2->stm32_gccfg &= ~(STM32_GCCFG_VBVALOVAL); + // from 0x5000 ST seems to use femtoPHY for UTMI+ HS PHY. Which use VBVALEXTOEN and VBVALOVAL for software override + // external VBUS sensing + // Note: N6 does not support hardware VBUS sensing, so the software override is always active. Therefore, VBDEN and + // VBVALEXTOEN are not available +#if CFG_TUSB_MCU == OPT_MCU_STM32N6 + if (is_host) { + gccfg |= STM32_GCCFG_PULLDOWNEN; + gccfg &= ~(STM32_GCCFG_VBVALOVAL); } else { - dwc2->stm32_gccfg |= STM32_GCCFG_VBVALOVAL; + gccfg &= ~STM32_GCCFG_PULLDOWNEN; + gccfg |= STM32_GCCFG_VBVALOVAL; } - } - #else - #error "Unsupported MCU family" + if (is_host) { + gccfg |= STM32_GCCFG_PULLDOWNEN; + gccfg &= ~(STM32_GCCFG_VBDEN | STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); + } else { + gccfg &= ~STM32_GCCFG_PULLDOWNEN; + if (vbus_sensing) { + gccfg |= STM32_GCCFG_VBDEN; + gccfg &= ~(STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL); + } else { + gccfg &= ~STM32_GCCFG_VBDEN; + gccfg |= STM32_GCCFG_VBVALEXTOEN | STM32_GCCFG_VBVALOVAL; + } + } #endif + } + + dwc2->stm32_gccfg = gccfg; } //------------- DCache -------------// diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index 2dd73c184..596bd0b34 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -1650,23 +1650,26 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define STM32_GCCFG_PHYHSEN_Msk (0x1UL << STM32_GCCFG_PHYHSEN_Pos) // 0x00800000 #define STM32_GCCFG_PHYHSEN STM32_GCCFG_PHYHSEN_Msk // HS PHY enable -// stm32f2/stm32f4 +// GUID < 0x2000: VBUSASEN, VBUSBSEN, NOVBUSSENS bits #define STM32_GCCFG_VBUSASEN_Pos (18U) #define STM32_GCCFG_VBUSASEN_Msk (0x1UL << STM32_GCCFG_VBUSASEN_Pos) // 0x00040000 #define STM32_GCCFG_VBUSASEN STM32_GCCFG_VBUSASEN_Msk // Enable A-device (host) VBUS sensing + #define STM32_GCCFG_VBUSBSEN_Pos (19U) #define STM32_GCCFG_VBUSBSEN_Msk (0x1UL << STM32_GCCFG_VBUSBSEN_Pos) // 0x00080000 #define STM32_GCCFG_VBUSBSEN STM32_GCCFG_VBUSBSEN_Msk // Enable B-device (peripheral) VBUS sensing + #define STM32_GCCFG_NOVBUSSENS_Pos (21U) #define STM32_GCCFG_NOVBUSSENS_Msk (0x1UL << STM32_GCCFG_NOVBUSSENS_Pos) // 0x00200000 #define STM32_GCCFG_NOVBUSSENS STM32_GCCFG_NOVBUSSENS_Msk // VBUS sensing disable option +// GUID < 0x2000: end // TODO: stm32u5a5 SDEN is 22nd bit, conflict with 20th bit above // #define STM32_GCCFG_SDEN_Pos (22U) // #define STM32_GCCFG_SDEN_Msk (0x1U << STM32_GCCFG_SDEN_Pos) // 0x00400000 // #define STM32_GCCFG_SDEN STM32_GCCFG_SDEN_Msk // Secondary detection (PD) mode enable -// stm32u5a5 VBVALOVA is 23rd bit, conflict with PHYHSEN bit above +// GUID >= 0x5000 use femtoPHY: VBVALOVA, VBVALEXTOEN, PULLDOWNEN #define STM32_GCCFG_VBVALOVAL_Pos (23U) #define STM32_GCCFG_VBVALOVAL_Msk (0x1U << STM32_GCCFG_VBVALOVAL_Pos) // 0x00800000 #define STM32_GCCFG_VBVALOVAL STM32_GCCFG_VBVALOVAL_Msk // Value of VBUSVLDEXT0 femtoPHY input @@ -1678,7 +1681,7 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define STM32_GCCFG_PULLDOWNEN_Pos (25U) #define STM32_GCCFG_PULLDOWNEN_Msk (0x1U << STM32_GCCFG_PULLDOWNEN_Pos) // 0x02000000 #define STM32_GCCFG_PULLDOWNEN STM32_GCCFG_PULLDOWNEN_Msk // Enables of femtoPHY pulldown resistors, used when ID PAD is disabled - +// GUID >= 0x5000: end /******************** Bit definition for DEACHINTMSK register ********************/ #define DEACHINTMSK_IEP1INTM_Pos (1U) diff --git a/src/tusb_option.h b/src/tusb_option.h index 8e270e5f2..ebf366e17 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -579,9 +579,18 @@ #define CFG_TUD_TEST_MODE 0 #endif +#ifndef CFG_TUD_VBUS_SENSE_DEFAULT + #define CFG_TUD_VBUS_SENSE_DEFAULT 0 +#endif + +// Enable VBUS Sensing +#ifndef CFG_TUD_VBUS_SENSE + #define CFG_TUD_VBUS_SENSE CFG_TUD_VBUS_SENSE_DEFAULT +#endif + //------------- Device Class Driver -------------// #ifndef CFG_TUD_BTH - #define CFG_TUD_BTH 0 + #define CFG_TUD_BTH 0 #endif #if CFG_TUD_BTH && !defined(CFG_TUD_BTH_ISO_ALT_COUNT) -- cgit v1.3.1 From f0b44ec6154237a4bd65a5a9d8f8bf944669af64 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 13 Feb 2026 22:29:14 +0700 Subject: use CFG_TUD_CONFIGURE_DWC2_DEFAULT to make it easier to add more value --- hw/bsp/stm32f2/family.c | 6 ++---- hw/bsp/stm32f4/family.c | 6 ++---- hw/bsp/stm32f7/family.c | 12 ++++-------- hw/bsp/stm32h7/family.c | 12 ++++-------- hw/bsp/stm32h7rs/family.c | 12 ++++-------- hw/bsp/stm32l4/family.c | 6 ++---- hw/bsp/stm32u5/family.c | 12 ++++-------- src/device/usbd.h | 4 +++- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 +- src/tusb_option.h | 10 +++++----- 10 files changed, 31 insertions(+), 51 deletions(-) diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c index f863a59f0..f95128040 100644 --- a/hw/bsp/stm32f2/family.c +++ b/hw/bsp/stm32f2/family.c @@ -106,10 +106,8 @@ void board_init(void) { #if CFG_TUD_ENABLED // Enable VBUS sense (B device) via pin PA9 - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = true - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = true; tud_configure(0, TUD_CFGID_DWC2, &cfg); #endif } diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 2170faca7..f0e9620f2 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -180,10 +180,8 @@ void board_init(void) { #endif #if CFG_TUD_ENABLED - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = VBUS_SENSE_EN - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = VBUS_SENSE_EN; tud_configure(BOARD_TUD_RHPORT, TUD_CFGID_DWC2, &cfg); board_vbus_set(BOARD_TUD_RHPORT, false); #endif diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index fc1c0bd13..d8f0da201 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -157,10 +157,8 @@ void board_init(void) { #endif // vbus sense #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0 - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = OTG_FS_VBUS_SENSE - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_FS_VBUS_SENSE; tud_configure(0, TUD_CFGID_DWC2, &cfg); #endif @@ -239,10 +237,8 @@ void board_init(void) { __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = OTG_HS_VBUS_SENSE - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_HS_VBUS_SENSE; tud_configure(1, TUD_CFGID_DWC2, &cfg); #endif diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 920f222d7..a320a7e72 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -183,10 +183,8 @@ void board_init(void) { #endif // vbus sense #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0 - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = OTG_FS_VBUS_SENSE - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_FS_VBUS_SENSE; tud_configure(0, TUD_CFGID_DWC2, &cfg); #endif @@ -215,10 +213,8 @@ void board_init(void) { __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = OTG_HS_VBUS_SENSE - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_HS_VBUS_SENSE; tud_configure(1, TUD_CFGID_DWC2, &cfg); #endif #endif diff --git a/hw/bsp/stm32h7rs/family.c b/hw/bsp/stm32h7rs/family.c index b1980f2ed..2cc39b7ac 100644 --- a/hw/bsp/stm32h7rs/family.c +++ b/hw/bsp/stm32h7rs/family.c @@ -359,10 +359,8 @@ void board_init(void) { #endif // vbus sense #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0 - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = OTG_FS_VBUS_SENSE - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_FS_VBUS_SENSE; tud_configure(0, TUD_CFGID_DWC2, &cfg); #endif @@ -390,10 +388,8 @@ void board_init(void) { #endif #if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = OTG_HS_VBUS_SENSE - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = OTG_HS_VBUS_SENSE; tud_configure(1, TUD_CFGID_DWC2, &cfg); #endif diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c index b51a9fc8f..65f6b9ab3 100644 --- a/hw/bsp/stm32l4/family.c +++ b/hw/bsp/stm32l4/family.c @@ -176,10 +176,8 @@ void board_init(void) { #if CFG_TUD_ENABLED /* Set Vbus sense */ - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = VBUS_SENSE_EN - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = VBUS_SENSE_EN; tud_configure(0, TUD_CFGID_DWC2, &cfg); #endif #else diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index c2ea270df..dfcf5c537 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -182,10 +182,8 @@ void board_init(void) { #endif // vbus sense #if CFG_TUD_ENABLED - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = VBUS_SENSE_EN - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = VBUS_SENSE_EN; tud_configure(0, TUD_CFGID_DWC2, &cfg); #endif @@ -217,10 +215,8 @@ void board_init(void) { HAL_SYSCFG_EnableOTGPHY(SYSCFG_OTG_HS_PHY_ENABLE); #if CFG_TUD_ENABLED - tud_configure_dwc2_t cfg = { - .bm_double_buffered = 0, - .vbus_sensing = VBUS_SENSE_EN - }; + tud_configure_dwc2_t cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; + cfg.vbus_sensing = VBUS_SENSE_EN; tud_configure(0, TUD_CFGID_DWC2, &cfg); #endif #endif // USB_OTG_FS diff --git a/src/device/usbd.h b/src/device/usbd.h index eaf07b81e..825fdba90 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -44,7 +44,9 @@ typedef struct { bool vbus_sensing; // Vbus pin is used for device connection detection, mandatory for tud_umount_cb() } tud_configure_dwc2_t; -#define TUD_CONFIGURE_DWC2_DEFAULT { .bm_double_buffered = 0, .vbus_sensing = CFG_TUD_VBUS_SENSE } + #ifndef CFG_TUD_CONFIGURE_DWC2_DEFAULT + #define CFG_TUD_CONFIGURE_DWC2_DEFAULT {.bm_double_buffered = 0, .vbus_sensing = CFG_TUD_VBUS_DETECT_HW} + #endif typedef union { tud_configure_dwc2_t dwc2; diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index a6a598dbf..97e83f4e1 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -77,7 +77,7 @@ CFG_TUD_MEM_SECTION static struct { TUD_EPBUF_DEF(setup_packet, 8); } _dcd_usbbuf; -static tud_configure_dwc2_t _tud_cfg = TUD_CONFIGURE_DWC2_DEFAULT; +static tud_configure_dwc2_t _tud_cfg = CFG_TUD_CONFIGURE_DWC2_DEFAULT; TU_ATTR_ALWAYS_INLINE static inline uint8_t dwc2_ep_count(const dwc2_regs_t* dwc2) { #if TU_CHECK_MCU(OPT_MCU_GD32VF103) diff --git a/src/tusb_option.h b/src/tusb_option.h index ebf366e17..d87c2dc8b 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -579,13 +579,13 @@ #define CFG_TUD_TEST_MODE 0 #endif -#ifndef CFG_TUD_VBUS_SENSE_DEFAULT - #define CFG_TUD_VBUS_SENSE_DEFAULT 0 +#ifndef CFG_TUD_VBUS_DETECT_HW_DEFAULT + #define CFG_TUD_VBUS_DETECT_HW_DEFAULT 0 #endif -// Enable VBUS Sensing -#ifndef CFG_TUD_VBUS_SENSE - #define CFG_TUD_VBUS_SENSE CFG_TUD_VBUS_SENSE_DEFAULT +// Enable VBUS Detect hardware, usually via functional GPIO +#ifndef CFG_TUD_VBUS_DETECT_HW + #define CFG_TUD_VBUS_DETECT_HW CFG_TUD_VBUS_DETECT_HW_DEFAULT #endif //------------- Device Class Driver -------------// -- cgit v1.3.1 From 59feef3208b84da0414c5159a9edba7653a82324 Mon Sep 17 00:00:00 2001 From: Roman Leonov Date: Sat, 14 Feb 2026 11:52:52 +0100 Subject: add(usbh.c): LOG1 debug message when no address available for hub --- src/host/usbh.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/src/host/usbh.c b/src/host/usbh.c index 41f41dcfb..d702e9186 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -1841,6 +1841,12 @@ static uint8_t enum_get_new_address(bool is_hub) { } } +#if CFG_TUH_HUB + if ( is_hub ) { + TU_LOG1("All addresses are occupied, try to increase CFG_TUH_HUB value.\r\n"); + } +#endif // CFG_TUH_HUB + return 0; // invalid address } -- cgit v1.3.1 From db1ff5d1692a4407496284b6684438256e1988db Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Thu, 19 Feb 2026 23:00:27 +0100 Subject: Better variable/function names --- src/portable/synopsys/dwc2/dcd_dwc2.c | 6 +++--- src/portable/synopsys/dwc2/dwc2_common.c | 6 +++--- src/portable/synopsys/dwc2/dwc2_common.h | 4 ++-- src/portable/synopsys/dwc2/hcd_dwc2.c | 10 +++++----- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 97e83f4e1..558065134 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -442,14 +442,14 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_memclr(&_dcd_data, sizeof(_dcd_data)); // Core Initialization - const bool is_highspeed = dwc2_core_is_highspeed(dwc2, TUSB_ROLE_DEVICE); + const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUSB_ROLE_DEVICE); const bool is_dma = dma_device_enabled(dwc2); - TU_ASSERT(dwc2_core_init(rhport, is_highspeed, is_dma)); + TU_ASSERT(dwc2_core_init(rhport, highspeed_phy, is_dma)); //------------- 7.1 Device Initialization -------------// // Set device max speed uint32_t dcfg = dwc2->dcfg & ~DCFG_DSPD_Msk; - if (is_highspeed) { + if (highspeed_phy) { // dcfg Highspeed's mask is 0 // XCVRDLY: transceiver delay between xcvr_sel and txvalid during device chirp is required diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index a7e6188df..5429af440 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -179,7 +179,7 @@ static bool check_dwc2(dwc2_regs_t* dwc2) { //-------------------------------------------------------------------- // //-------------------------------------------------------------------- -bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role) { +bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, tusb_role_t role) { (void)dwc2; #if CFG_TUD_ENABLED if (role == TUSB_ROLE_DEVICE && !TUD_OPT_HIGH_SPEED) { @@ -204,7 +204,7 @@ bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role) { * In addition, UTMI+/ULPI can be shared to run at fullspeed mode with 48Mhz * */ -bool dwc2_core_init(uint8_t rhport, bool is_highspeed, bool is_dma) { +bool dwc2_core_init(uint8_t rhport, bool highspeed_phy, bool is_dma) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); // Check Synopsys ID register, failed if controller clock/power is not enabled @@ -213,7 +213,7 @@ bool dwc2_core_init(uint8_t rhport, bool is_highspeed, bool is_dma) { // disable global interrupt dwc2->gahbcfg &= ~GAHBCFG_GINT; - if (is_highspeed) { + if (highspeed_phy) { phy_hs_init(dwc2); } else { phy_fs_init(dwc2); diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index 428304ba9..b03fecad9 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -84,8 +84,8 @@ TU_ATTR_ALWAYS_INLINE static inline dwc2_regs_t* DWC2_REG(uint8_t rhport) { return (dwc2_regs_t*)_dwc2_controller[rhport].reg_base; } -bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role); -bool dwc2_core_init(uint8_t rhport, bool is_highspeed, bool is_dma); +bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, tusb_role_t role); +bool dwc2_core_init(uint8_t rhport, bool highspeed_phy, bool is_dma); void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr); //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 8182fd6cc..2d667eb43 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -364,9 +364,9 @@ static void dfifo_host_init(uint8_t rhport) { // fixed allocation for now, improve later: // - ptx_largest is limited to 256 for FS since most FS core only has 1024 bytes total - bool is_highspeed = dwc2_core_is_highspeed(dwc2, TUSB_ROLE_HOST); - uint32_t nptx_largest = is_highspeed ? TUSB_EPSIZE_BULK_HS/4 : TUSB_EPSIZE_BULK_FS/4; - uint32_t ptx_largest = is_highspeed ? TUSB_EPSIZE_ISO_HS_MAX/4 : 256/4; + bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUSB_ROLE_HOST); + uint32_t nptx_largest = highspeed_phy ? TUSB_EPSIZE_BULK_HS/4 : TUSB_EPSIZE_BULK_FS/4; + uint32_t ptx_largest = highspeed_phy ? TUSB_EPSIZE_ISO_HS_MAX/4 : 256/4; uint16_t nptxfsiz = 2 * nptx_largest; uint16_t rxfsiz = 2 * (ptx_largest + 2) + ghwcfg2.num_host_ch; @@ -406,9 +406,9 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_memclr(&_hcd_data, sizeof(_hcd_data)); // Core Initialization - const bool is_highspeed = dwc2_core_is_highspeed(dwc2, TUSB_ROLE_HOST); + const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUSB_ROLE_HOST); const bool is_dma = dma_host_enabled(dwc2); - TU_ASSERT(dwc2_core_init(rhport, is_highspeed, is_dma)); + TU_ASSERT(dwc2_core_init(rhport, highspeed_phy, is_dma)); //------------- 3.1 Host Initialization -------------// -- cgit v1.3.1 From c8265a3709ebe6b5f77aa3b5bb148740c5818f00 Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Thu, 19 Feb 2026 23:03:32 +0100 Subject: Introduce TUH_CFGID_PHY_SPEED configure option --- src/host/usbh.h | 1 + src/portable/synopsys/dwc2/dwc2_common.c | 9 +++++++-- src/portable/synopsys/dwc2/dwc2_common.h | 3 +++ src/portable/synopsys/dwc2/hcd_dwc2.c | 18 +++++++++++------- 4 files changed, 22 insertions(+), 9 deletions(-) diff --git a/src/host/usbh.h b/src/host/usbh.h index d86efbcb2..03577ba3f 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -93,6 +93,7 @@ typedef struct { // ConfigID for tuh_configure() enum { TUH_CFGID_INVALID = 0, + TUH_CFGID_PHY_SPEED = 10, // cfg_param: tusb_speed_t TUH_CFGID_RPI_PIO_USB_CONFIGURATION = 100, // cfg_param: pio_usb_configuration_t TUH_CFGID_MAX3421 = 200, TUH_CFGID_FSDEV = 300, diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 5429af440..429c56123 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -187,8 +187,13 @@ bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, tusb_role_t role) { } #endif #if CFG_TUH_ENABLED - if (role == TUSB_ROLE_HOST && !TUH_OPT_HIGH_SPEED) { - return false; + if (role == TUSB_ROLE_HOST) { + if (_hcd_cfg_phy_speed == TUSB_SPEED_HIGH) + return true; + if (_hcd_cfg_phy_speed < TUSB_SPEED_HIGH) + return false; + if (!TUH_OPT_HIGH_SPEED) + return false; } #endif diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index b03fecad9..16a18c673 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -76,6 +76,9 @@ enum { //--------------------------------------------------------------------+ // Core/Controller //--------------------------------------------------------------------+ + +extern tusb_speed_t _hcd_cfg_phy_speed; + TU_ATTR_ALWAYS_INLINE static inline dwc2_regs_t* DWC2_REG(uint8_t rhport) { if (rhport >= DWC2_CONTROLLER_COUNT) { // user mis-configured, ignore and use first controller diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 2d667eb43..99be779ef 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -112,6 +112,7 @@ typedef struct { } hcd_data_t; hcd_data_t _hcd_data; +tusb_speed_t _hcd_cfg_phy_speed = TUSB_SPEED_AUTO; //-------------------------------------------------------------------- // @@ -392,15 +393,13 @@ static void dfifo_host_init(uint8_t rhport) { // optional hcd configuration, called by tuh_configure() bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { (void) rhport; - (void) cfg_id; - (void) cfg_param; - + TU_VERIFY(cfg_id == TUH_CFGID_PHY_SPEED && cfg_param != NULL); + _hcd_cfg_phy_speed = *(const tusb_speed_t *)cfg_param; return true; } // Initialize controller to host mode bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { - (void) rh_init; dwc2_regs_t* dwc2 = DWC2_REG(rhport); tu_memclr(&_hcd_data, sizeof(_hcd_data)); @@ -412,9 +411,6 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { //------------- 3.1 Host Initialization -------------// - // work at max supported speed - dwc2->hcfg &= ~HCFG_FSLS_ONLY; - // Enable HFIR reload if (dwc2->gsnpsid >= DWC2_CORE_REV_2_92a) { dwc2->hfir |= HFIR_RELOAD_CTRL; @@ -432,6 +428,14 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dwc2_stm32_gccfg_cfg(dwc2, false, true); #endif + if (highspeed_phy && rh_init->speed < TUSB_SPEED_HIGH) { + // disable high speed mode + dwc2->hcfg |= HCFG_FSLS_ONLY; + } else { + // work at max supported speed + dwc2->hcfg &= ~HCFG_FSLS_ONLY; + } + // configure fixed-allocated fifo scheme dfifo_host_init(rhport); -- cgit v1.3.1 From 7e6177097166073579418ce1ff98aa2185f48396 Mon Sep 17 00:00:00 2001 From: Cédric Berger Date: Thu, 19 Feb 2026 23:30:25 +0100 Subject: Fix a couple indentations --- src/portable/synopsys/dwc2/dwc2_common.c | 12 ++++++------ src/portable/synopsys/dwc2/hcd_dwc2.c | 8 ++++---- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 429c56123..8c2324283 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -188,12 +188,12 @@ bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, tusb_role_t role) { #endif #if CFG_TUH_ENABLED if (role == TUSB_ROLE_HOST) { - if (_hcd_cfg_phy_speed == TUSB_SPEED_HIGH) - return true; - if (_hcd_cfg_phy_speed < TUSB_SPEED_HIGH) - return false; - if (!TUH_OPT_HIGH_SPEED) - return false; + if (_hcd_cfg_phy_speed == TUSB_SPEED_HIGH) + return true; + if (_hcd_cfg_phy_speed < TUSB_SPEED_HIGH) + return false; + if (!TUH_OPT_HIGH_SPEED) + return false; } #endif diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 99be779ef..9f8133196 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -429,11 +429,11 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { #endif if (highspeed_phy && rh_init->speed < TUSB_SPEED_HIGH) { - // disable high speed mode - dwc2->hcfg |= HCFG_FSLS_ONLY; + // disable high speed mode + dwc2->hcfg |= HCFG_FSLS_ONLY; } else { - // work at max supported speed - dwc2->hcfg &= ~HCFG_FSLS_ONLY; + // work at max supported speed + dwc2->hcfg &= ~HCFG_FSLS_ONLY; } // configure fixed-allocated fifo scheme -- cgit v1.3.1 From c5ec572396d3f5bae05d4f0baa2c026598604f48 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 20 Feb 2026 13:57:34 +0100 Subject: refactor config option Signed-off-by: HiFiPhile --- src/host/usbh.h | 7 ++++++- src/portable/synopsys/dwc2/dwc2_common.c | 9 ++------- src/portable/synopsys/dwc2/dwc2_common.h | 3 --- src/portable/synopsys/dwc2/hcd_dwc2.c | 13 +++++++------ 4 files changed, 15 insertions(+), 17 deletions(-) diff --git a/src/host/usbh.h b/src/host/usbh.h index 03577ba3f..2f332b442 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -93,10 +93,10 @@ typedef struct { // ConfigID for tuh_configure() enum { TUH_CFGID_INVALID = 0, - TUH_CFGID_PHY_SPEED = 10, // cfg_param: tusb_speed_t TUH_CFGID_RPI_PIO_USB_CONFIGURATION = 100, // cfg_param: pio_usb_configuration_t TUH_CFGID_MAX3421 = 200, TUH_CFGID_FSDEV = 300, + TUH_CFGID_DWC2 = 400 }; typedef struct { @@ -109,10 +109,15 @@ typedef struct { uint8_t max_nak; // max NAK per endpoint per frame to save CPU usage (0=unlimited) } tuh_configure_fsdev_t; +typedef struct { + bool use_hs_phy; // Always use high-speed ULPI/UTMI phy even working at full-speed +} tuh_configure_dwc2_t; + typedef union { // For TUH_CFGID_RPI_PIO_USB_CONFIGURATION use pio_usb_configuration_t tuh_configure_max3421_t max3421; tuh_configure_fsdev_t fsdev; + tuh_configure_dwc2_t dwc2; } tuh_configure_param_t; //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 8c2324283..5429af440 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -187,13 +187,8 @@ bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, tusb_role_t role) { } #endif #if CFG_TUH_ENABLED - if (role == TUSB_ROLE_HOST) { - if (_hcd_cfg_phy_speed == TUSB_SPEED_HIGH) - return true; - if (_hcd_cfg_phy_speed < TUSB_SPEED_HIGH) - return false; - if (!TUH_OPT_HIGH_SPEED) - return false; + if (role == TUSB_ROLE_HOST && !TUH_OPT_HIGH_SPEED) { + return false; } #endif diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index 16a18c673..b03fecad9 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -76,9 +76,6 @@ enum { //--------------------------------------------------------------------+ // Core/Controller //--------------------------------------------------------------------+ - -extern tusb_speed_t _hcd_cfg_phy_speed; - TU_ATTR_ALWAYS_INLINE static inline dwc2_regs_t* DWC2_REG(uint8_t rhport) { if (rhport >= DWC2_CONTROLLER_COUNT) { // user mis-configured, ignore and use first controller diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 9f8133196..0fbb55191 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -111,8 +111,9 @@ typedef struct { hcd_endpoint_t edpt[CFG_TUH_DWC2_ENDPOINT_MAX]; } hcd_data_t; -hcd_data_t _hcd_data; -tusb_speed_t _hcd_cfg_phy_speed = TUSB_SPEED_AUTO; +static hcd_data_t _hcd_data; + +static tuh_configure_dwc2_t _tuh_cfg = {.use_hs_phy = TUH_OPT_HIGH_SPEED}; //-------------------------------------------------------------------- // @@ -393,8 +394,8 @@ static void dfifo_host_init(uint8_t rhport) { // optional hcd configuration, called by tuh_configure() bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { (void) rhport; - TU_VERIFY(cfg_id == TUH_CFGID_PHY_SPEED && cfg_param != NULL); - _hcd_cfg_phy_speed = *(const tusb_speed_t *)cfg_param; + TU_VERIFY(cfg_id == TUH_CFGID_DWC2 && cfg_param != NULL); + _tuh_cfg = *(const tuh_configure_dwc2_t *)cfg_param; return true; } @@ -405,7 +406,7 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_memclr(&_hcd_data, sizeof(_hcd_data)); // Core Initialization - const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUSB_ROLE_HOST); + const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUSB_ROLE_HOST) || _tuh_cfg.use_hs_phy; const bool is_dma = dma_host_enabled(dwc2); TU_ASSERT(dwc2_core_init(rhport, highspeed_phy, is_dma)); @@ -428,7 +429,7 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dwc2_stm32_gccfg_cfg(dwc2, false, true); #endif - if (highspeed_phy && rh_init->speed < TUSB_SPEED_HIGH) { + if (rh_init->speed < TUSB_SPEED_HIGH || !TUH_OPT_HIGH_SPEED) { // disable high speed mode dwc2->hcfg |= HCFG_FSLS_ONLY; } else { -- cgit v1.3.1 From 167a50714636261b72ed6fc3f7c6682c209c0d7f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 21 Feb 2026 17:03:06 +0100 Subject: fix ci Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 0fbb55191..f7dc93ae1 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -432,10 +432,13 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { if (rh_init->speed < TUSB_SPEED_HIGH || !TUH_OPT_HIGH_SPEED) { // disable high speed mode dwc2->hcfg |= HCFG_FSLS_ONLY; - } else { + } +#if TUH_OPT_HIGH_SPEED + else { // work at max supported speed dwc2->hcfg &= ~HCFG_FSLS_ONLY; } +#endif // configure fixed-allocated fifo scheme dfifo_host_init(rhport); -- cgit v1.3.1 From dafb0d2bf4b99531fe632acb621861cb64c80e66 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 21 Feb 2026 17:34:11 +0100 Subject: check femtoPHY speed Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/dwc2_common.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 5429af440..70e38b9f7 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -180,7 +180,13 @@ static bool check_dwc2(dwc2_regs_t* dwc2) { // //-------------------------------------------------------------------- bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, tusb_role_t role) { - (void)dwc2; +#ifdef TUP_USBIP_DWC2_STM32 + if (dwc2->guid >= 0x5000) { + // femtoPHY UTMI+ PHY + return true; + } +#endif + #if CFG_TUD_ENABLED if (role == TUSB_ROLE_DEVICE && !TUD_OPT_HIGH_SPEED) { return false; -- cgit v1.3.1 From b585df168a3489845cda3cb732560d4fe260e609 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 21 Feb 2026 17:44:17 +0100 Subject: refactor speed check Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 +- src/portable/synopsys/dwc2/dwc2_common.c | 11 ++--------- src/portable/synopsys/dwc2/dwc2_common.h | 2 +- src/portable/synopsys/dwc2/hcd_dwc2.c | 4 ++-- 4 files changed, 6 insertions(+), 13 deletions(-) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 558065134..dec2db5f2 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -442,7 +442,7 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_memclr(&_dcd_data, sizeof(_dcd_data)); // Core Initialization - const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUSB_ROLE_DEVICE); + const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUD_OPT_HIGH_SPEED); const bool is_dma = dma_device_enabled(dwc2); TU_ASSERT(dwc2_core_init(rhport, highspeed_phy, is_dma)); diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 70e38b9f7..d26e2daca 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -179,7 +179,7 @@ static bool check_dwc2(dwc2_regs_t* dwc2) { //-------------------------------------------------------------------- // //-------------------------------------------------------------------- -bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, tusb_role_t role) { +bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, bool prefer_hs_phy) { #ifdef TUP_USBIP_DWC2_STM32 if (dwc2->guid >= 0x5000) { // femtoPHY UTMI+ PHY @@ -187,16 +187,9 @@ bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, tusb_role_t role) { } #endif -#if CFG_TUD_ENABLED - if (role == TUSB_ROLE_DEVICE && !TUD_OPT_HIGH_SPEED) { + if (!prefer_hs_phy) { return false; } -#endif -#if CFG_TUH_ENABLED - if (role == TUSB_ROLE_HOST && !TUH_OPT_HIGH_SPEED) { - return false; - } -#endif const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; return ghwcfg2.hs_phy_type != GHWCFG2_HSPHY_NOT_SUPPORTED; diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index b03fecad9..aacb62536 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -84,7 +84,7 @@ TU_ATTR_ALWAYS_INLINE static inline dwc2_regs_t* DWC2_REG(uint8_t rhport) { return (dwc2_regs_t*)_dwc2_controller[rhport].reg_base; } -bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, tusb_role_t role); +bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, bool prefer_hs_phy); bool dwc2_core_init(uint8_t rhport, bool highspeed_phy, bool is_dma); void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr); diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index f7dc93ae1..c9ea144c8 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -366,7 +366,7 @@ static void dfifo_host_init(uint8_t rhport) { // fixed allocation for now, improve later: // - ptx_largest is limited to 256 for FS since most FS core only has 1024 bytes total - bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUSB_ROLE_HOST); + bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, _tuh_cfg.use_hs_phy); uint32_t nptx_largest = highspeed_phy ? TUSB_EPSIZE_BULK_HS/4 : TUSB_EPSIZE_BULK_FS/4; uint32_t ptx_largest = highspeed_phy ? TUSB_EPSIZE_ISO_HS_MAX/4 : 256/4; @@ -406,7 +406,7 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_memclr(&_hcd_data, sizeof(_hcd_data)); // Core Initialization - const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUSB_ROLE_HOST) || _tuh_cfg.use_hs_phy; + const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, _tuh_cfg.use_hs_phy); const bool is_dma = dma_host_enabled(dwc2); TU_ASSERT(dwc2_core_init(rhport, highspeed_phy, is_dma)); -- cgit v1.3.1 From e947af26c62fe8717f754e072a18e9e24f33ca96 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Sun, 22 Feb 2026 13:33:29 +0100 Subject: Apply suggestions from code review Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- src/host/usbh.h | 2 +- src/portable/synopsys/dwc2/hcd_dwc2.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/src/host/usbh.h b/src/host/usbh.h index 2f332b442..143d36f8c 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -110,7 +110,7 @@ typedef struct { } tuh_configure_fsdev_t; typedef struct { - bool use_hs_phy; // Always use high-speed ULPI/UTMI phy even working at full-speed + bool use_hs_phy; // Always use high-speed ULPI/UTMI phy even when working at full-speed } tuh_configure_dwc2_t; typedef union { diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index c9ea144c8..ac6fcceb1 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -395,7 +395,8 @@ static void dfifo_host_init(uint8_t rhport) { bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { (void) rhport; TU_VERIFY(cfg_id == TUH_CFGID_DWC2 && cfg_param != NULL); - _tuh_cfg = *(const tuh_configure_dwc2_t *)cfg_param; + tuh_configure_param_t const* cfg = (tuh_configure_param_t const*) cfg_param; + _tuh_cfg = cfg->dwc2; return true; } -- cgit v1.3.1 From 1eef6f4f4f7a26a5be3c4b774992aadcc8660820 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 23 Feb 2026 15:34:59 +0700 Subject: refactor: improve high-speed PHY handling and FIFO configuration in DWC2 driver --- src/portable/synopsys/dwc2/dcd_dwc2.c | 6 ++--- src/portable/synopsys/dwc2/dwc2_common.c | 4 ++-- src/portable/synopsys/dwc2/dwc2_common.h | 2 +- src/portable/synopsys/dwc2/hcd_dwc2.c | 39 +++++++++++++++----------------- 4 files changed, 24 insertions(+), 27 deletions(-) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index dec2db5f2..d1d4b080e 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -442,14 +442,14 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_memclr(&_dcd_data, sizeof(_dcd_data)); // Core Initialization - const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, TUD_OPT_HIGH_SPEED); + const bool is_hs_phy = dwc2_core_is_highspeed_phy(dwc2, TUD_OPT_HIGH_SPEED); const bool is_dma = dma_device_enabled(dwc2); - TU_ASSERT(dwc2_core_init(rhport, highspeed_phy, is_dma)); + TU_ASSERT(dwc2_core_init(rhport, is_hs_phy, is_dma)); //------------- 7.1 Device Initialization -------------// // Set device max speed uint32_t dcfg = dwc2->dcfg & ~DCFG_DSPD_Msk; - if (highspeed_phy) { + if (is_hs_phy) { // dcfg Highspeed's mask is 0 // XCVRDLY: transceiver delay between xcvr_sel and txvalid during device chirp is required diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index d26e2daca..98ef22d03 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -203,7 +203,7 @@ bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, bool prefer_hs_phy) { * In addition, UTMI+/ULPI can be shared to run at fullspeed mode with 48Mhz * */ -bool dwc2_core_init(uint8_t rhport, bool highspeed_phy, bool is_dma) { +bool dwc2_core_init(uint8_t rhport, bool is_hs_phy, bool is_dma) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); // Check Synopsys ID register, failed if controller clock/power is not enabled @@ -212,7 +212,7 @@ bool dwc2_core_init(uint8_t rhport, bool highspeed_phy, bool is_dma) { // disable global interrupt dwc2->gahbcfg &= ~GAHBCFG_GINT; - if (highspeed_phy) { + if (is_hs_phy) { phy_hs_init(dwc2); } else { phy_fs_init(dwc2); diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index aacb62536..6ee351ab5 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -85,7 +85,7 @@ TU_ATTR_ALWAYS_INLINE static inline dwc2_regs_t* DWC2_REG(uint8_t rhport) { } bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, bool prefer_hs_phy); -bool dwc2_core_init(uint8_t rhport, bool highspeed_phy, bool is_dma); +bool dwc2_core_init(uint8_t rhport, bool is_hs_phy, bool is_dma); void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr); //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index ac6fcceb1..cc11c82d7 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -112,7 +112,6 @@ typedef struct { } hcd_data_t; static hcd_data_t _hcd_data; - static tuh_configure_dwc2_t _tuh_cfg = {.use_hs_phy = TUH_OPT_HIGH_SPEED}; //-------------------------------------------------------------------- @@ -352,7 +351,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t cal_next_pid(uint8_t pid, uint8_t pa * TX periodic (PTX) * - At least largest-EPsize*MulCount/4 (MulCount up to 3 for high-bandwidth ISO/interrupt) */ -static void dfifo_host_init(uint8_t rhport) { +static void dfifo_host_init(uint8_t rhport, bool is_highspeed) { const dwc2_controller_t* dwc2_controller = &_dwc2_controller[rhport]; dwc2_regs_t* dwc2 = DWC2_REG(rhport); const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; @@ -365,10 +364,9 @@ static void dfifo_host_init(uint8_t rhport) { } // fixed allocation for now, improve later: - // - ptx_largest is limited to 256 for FS since most FS core only has 1024 bytes total - bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, _tuh_cfg.use_hs_phy); - uint32_t nptx_largest = highspeed_phy ? TUSB_EPSIZE_BULK_HS/4 : TUSB_EPSIZE_BULK_FS/4; - uint32_t ptx_largest = highspeed_phy ? TUSB_EPSIZE_ISO_HS_MAX/4 : 256/4; + // - ptx_largest is limited to 256 for FS since most FS core only has 1024 bytes total + uint32_t nptx_largest = is_highspeed ? TUSB_EPSIZE_BULK_HS / 4 : TUSB_EPSIZE_BULK_FS / 4; + uint32_t ptx_largest = is_highspeed ? TUSB_EPSIZE_ISO_HS_MAX / 4 : 256 / 4; uint16_t nptxfsiz = 2 * nptx_largest; uint16_t rxfsiz = 2 * (ptx_largest + 2) + ghwcfg2.num_host_ch; @@ -403,16 +401,14 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { // Initialize controller to host mode bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); - tu_memclr(&_hcd_data, sizeof(_hcd_data)); // Core Initialization - const bool highspeed_phy = dwc2_core_is_highspeed_phy(dwc2, _tuh_cfg.use_hs_phy); + const bool is_hs_phy = dwc2_core_is_highspeed_phy(dwc2, _tuh_cfg.use_hs_phy); const bool is_dma = dma_host_enabled(dwc2); - TU_ASSERT(dwc2_core_init(rhport, highspeed_phy, is_dma)); + TU_ASSERT(dwc2_core_init(rhport, is_hs_phy, is_dma)); //------------- 3.1 Host Initialization -------------// - // Enable HFIR reload if (dwc2->gsnpsid >= DWC2_CORE_REV_2_92a) { dwc2->hfir |= HFIR_RELOAD_CTRL; @@ -426,23 +422,24 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { #endif while ((dwc2->gintsts & GINTSTS_CMOD) != GINTSTS_CMODE_HOST) {} -#ifdef TUP_USBIP_DWC2_STM32 + #ifdef TUP_USBIP_DWC2_STM32 dwc2_stm32_gccfg_cfg(dwc2, false, true); -#endif + #endif - if (rh_init->speed < TUSB_SPEED_HIGH || !TUH_OPT_HIGH_SPEED) { - // disable high speed mode - dwc2->hcfg |= HCFG_FSLS_ONLY; + bool is_highspeed; + if (!TUH_OPT_HIGH_SPEED || rh_init->speed < TUSB_SPEED_HIGH) { + dwc2->hcfg |= HCFG_FSLS_ONLY; // disable high speed mode + is_highspeed = false; } -#if TUH_OPT_HIGH_SPEED + #if TUH_OPT_HIGH_SPEED else { - // work at max supported speed - dwc2->hcfg &= ~HCFG_FSLS_ONLY; + dwc2->hcfg &= ~HCFG_FSLS_ONLY; // work at max supported speed + is_highspeed = true; } -#endif + #endif - // configure fixed-allocated fifo scheme - dfifo_host_init(rhport); + // configure a fixed-allocated fifo scheme + dfifo_host_init(rhport, is_highspeed); dwc2->hprt = HPRT_W1_MASK; // clear all write-1-clear bits dwc2->hprt = HPRT_POWER; // turn on VBUS -- cgit v1.3.1 From f179b2957dbe00ad937eb50ada42dc32233a7a93 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 23 Feb 2026 19:33:29 +0700 Subject: refactor: streamline high-speed PHY detection and configuration in DWC2 driver --- AGENTS.md | 10 +++++++-- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 +- src/portable/synopsys/dwc2/dwc2_common.c | 35 +++++++++++++++----------------- src/portable/synopsys/dwc2/dwc2_common.h | 1 + src/portable/synopsys/dwc2/hcd_dwc2.c | 27 ++++++++++-------------- 5 files changed, 37 insertions(+), 38 deletions(-) diff --git a/AGENTS.md b/AGENTS.md index 73bf1f599..ef8baec5a 100644 --- a/AGENTS.md +++ b/AGENTS.md @@ -101,9 +101,15 @@ make BOARD=raspberry_pi_pico all ## Hardware-in-the-Loop (HIL) Testing +- `-B examples` means `examples` is the parent folder that contains multi-board build outputs such as `examples/cmake-build-BOARD_NAME/...` +- Select config file before running HIL tests: + - if GitHub Actions self-hosted runner service is running, use `tinyusb.json` + - otherwise use `local.json` + - example: + `HIL_CONFIG=$( (systemctl list-units --type=service --state=running 2>/dev/null; systemctl --user list-units --type=service --state=running 2>/dev/null) | grep -q 'actions\.runner' && echo tinyusb.json || echo local.json )` - Run tests on actual hardware, one of following ways: - - test a specific board `python test/hil/hil_test.py -b BOARD_NAME -B examples local.json` - - test all boards in config `python test/hil/hil_test.py -B examples local.json` + - test a specific board `python test/hil/hil_test.py -b BOARD_NAME -B examples $HIL_CONFIG` + - test all boards in config `python test/hil/hil_test.py -B examples $HIL_CONFIG` - In case of error, enabled verbose mode with `-v` flag for detailed logs. Also try to observe script output, and try to modify hil_test.py (temporarily) to add more debug prints to pinpoint the issue. - Requires pre-built (all) examples for target boards (see Build Examples section 2) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index d1d4b080e..2e2b050bc 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -479,7 +479,7 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { #ifdef TUP_USBIP_DWC2_STM32 dwc2_stm32_gccfg_cfg(dwc2, _tud_cfg.vbus_sensing, false); -#endif + #endif // Enable required interrupts dwc2->gintmsk |= GINTMSK_OTGINT | GINTMSK_USBRST | GINTMSK_ENUMDNEM | GINTMSK_WUIM; diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 98ef22d03..27dda44ee 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -60,6 +60,7 @@ static void reset_core(dwc2_regs_t* dwc2) { while (!(dwc2->grstctl & GRSTCTL_AHBIDL)) {} // wait for AHB master IDLE } +// Dedicated FS PHY is internal with a clock 48Mhz. static void phy_fs_init(dwc2_regs_t* dwc2) { TU_LOG(DWC2_COMMON_DEBUG, "Fullspeed PHY init\r\n"); @@ -86,6 +87,13 @@ static void phy_fs_init(dwc2_regs_t* dwc2) { dwc2_phy_update(dwc2, GHWCFG2_HSPHY_NOT_SUPPORTED); } +/* dwc2 has 2 highspeed PHYs options + * - UTMI+ is internal highspeed PHY, can be clocked at 30/60 Mhz for fullspeed or 60 Mhz for highspeed. Can be either + * 8 or 16-bit interface. + * - ULPI is external highspeed PHY, clocked at 60Mhz with 8-bit interface. + * + * In addition, UTMI+/ULPI can be shared to run at fullspeed mode with 48Mhz + */ static void phy_hs_init(dwc2_regs_t* dwc2) { uint32_t gusbcfg = dwc2->gusbcfg; const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; @@ -180,29 +188,18 @@ static bool check_dwc2(dwc2_regs_t* dwc2) { // //-------------------------------------------------------------------- bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, bool prefer_hs_phy) { -#ifdef TUP_USBIP_DWC2_STM32 - if (dwc2->guid >= 0x5000) { - // femtoPHY UTMI+ PHY - return true; - } -#endif + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; + const bool has_hs_phy = (ghwcfg2.hs_phy_type != GHWCFG2_HSPHY_NOT_SUPPORTED); - if (!prefer_hs_phy) { - return false; + if (prefer_hs_phy) { + return has_hs_phy; + } else { + const bool has_fs_phy = (ghwcfg2.fs_phy_type != GHWCFG2_FSPHY_NOT_SUPPORTED); + // false if has fs phy, otherwise true since hs phy is the only available phy + return !has_fs_phy && has_hs_phy; } - - const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; - return ghwcfg2.hs_phy_type != GHWCFG2_HSPHY_NOT_SUPPORTED; } -/* dwc2 has several PHYs option - * - UTMI+ is internal highspeed PHY, clock can be 30 Mhz (8-bit) or 60 Mhz (16-bit) - * - ULPI is external highspeed PHY, clock is 60Mhz with only 8-bit interface - * - Dedicated FS PHY is internal with clock 48Mhz. - * - * In addition, UTMI+/ULPI can be shared to run at fullspeed mode with 48Mhz - * -*/ bool dwc2_core_init(uint8_t rhport, bool is_hs_phy, bool is_dma) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index 6ee351ab5..1947173b2 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -84,6 +84,7 @@ TU_ATTR_ALWAYS_INLINE static inline dwc2_regs_t* DWC2_REG(uint8_t rhport) { return (dwc2_regs_t*)_dwc2_controller[rhport].reg_base; } +// check if highspeed phy should be used bool dwc2_core_is_highspeed_phy(dwc2_regs_t* dwc2, bool prefer_hs_phy); bool dwc2_core_init(uint8_t rhport, bool is_hs_phy, bool is_dma); void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr); diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index cc11c82d7..0fd60b35d 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -351,7 +351,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t cal_next_pid(uint8_t pid, uint8_t pa * TX periodic (PTX) * - At least largest-EPsize*MulCount/4 (MulCount up to 3 for high-bandwidth ISO/interrupt) */ -static void dfifo_host_init(uint8_t rhport, bool is_highspeed) { +static void dfifo_host_init(uint8_t rhport, bool is_hs_phy) { const dwc2_controller_t* dwc2_controller = &_dwc2_controller[rhport]; dwc2_regs_t* dwc2 = DWC2_REG(rhport); const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; @@ -365,8 +365,8 @@ static void dfifo_host_init(uint8_t rhport, bool is_highspeed) { // fixed allocation for now, improve later: // - ptx_largest is limited to 256 for FS since most FS core only has 1024 bytes total - uint32_t nptx_largest = is_highspeed ? TUSB_EPSIZE_BULK_HS / 4 : TUSB_EPSIZE_BULK_FS / 4; - uint32_t ptx_largest = is_highspeed ? TUSB_EPSIZE_ISO_HS_MAX / 4 : 256 / 4; + uint32_t nptx_largest = is_hs_phy ? TUSB_EPSIZE_BULK_HS / 4 : TUSB_EPSIZE_BULK_FS / 4; + uint32_t ptx_largest = is_hs_phy ? TUSB_EPSIZE_ISO_HS_MAX / 4 : 256 / 4; uint16_t nptxfsiz = 2 * nptx_largest; uint16_t rxfsiz = 2 * (ptx_largest + 2) + ghwcfg2.num_host_ch; @@ -416,30 +416,25 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // force host mode and wait for mode switch dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_FDMOD) | GUSBCFG_FHMOD; -#if CFG_TUSB_MCU == OPT_MCU_STM32N6 + #if CFG_TUSB_MCU == OPT_MCU_STM32N6 // No hardware detection of Vbus B-session is available on the STM32N6 dwc2->stm32_gccfg &= ~STM32_GCCFG_VBVALOVAL; -#endif + #endif + while ((dwc2->gintsts & GINTSTS_CMOD) != GINTSTS_CMODE_HOST) {} #ifdef TUP_USBIP_DWC2_STM32 dwc2_stm32_gccfg_cfg(dwc2, false, true); #endif - bool is_highspeed; - if (!TUH_OPT_HIGH_SPEED || rh_init->speed < TUSB_SPEED_HIGH) { - dwc2->hcfg |= HCFG_FSLS_ONLY; // disable high speed mode - is_highspeed = false; - } - #if TUH_OPT_HIGH_SPEED - else { - dwc2->hcfg &= ~HCFG_FSLS_ONLY; // work at max supported speed - is_highspeed = true; + if (is_hs_phy && (rh_init->speed == TUSB_SPEED_HIGH || rh_init->speed == TUSB_SPEED_AUTO)) { + dwc2->hcfg &= ~HCFG_FSLS_ONLY; // max speed + } else { + dwc2->hcfg |= HCFG_FSLS_ONLY; // disable high speed mode } - #endif // configure a fixed-allocated fifo scheme - dfifo_host_init(rhport, is_highspeed); + dfifo_host_init(rhport, is_hs_phy); dwc2->hprt = HPRT_W1_MASK; // clear all write-1-clear bits dwc2->hprt = HPRT_POWER; // turn on VBUS -- cgit v1.3.1 From da21dab358a06106188e2bb06fa71ccd5390fa1a Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 24 Feb 2026 23:37:07 +0700 Subject: fix CDC host FTDI multiple channel loop fix typos for ftdi_process_set_config() add J-Link GDB + RTT logging instructions --- AGENTS.md | 16 +++++ src/class/cdc/cdc_host.c | 171 ++++++++++++++++++++++++----------------------- 2 files changed, 103 insertions(+), 84 deletions(-) diff --git a/AGENTS.md b/AGENTS.md index ef8baec5a..a5159aa4a 100644 --- a/AGENTS.md +++ b/AGENTS.md @@ -91,6 +91,22 @@ make BOARD=raspberry_pi_pico all - Make: `make BOARD=raspberry_pi_pico all uf2` - **List all targets** (CMake/Ninja): `ninja -t targets` +## J-Link GDB Server + RTT Logging + +- Build with RTT logging enabled (example): + `cd examples/device/cdc_msc && make BOARD=stm32h743eval LOG=2 LOGGER=rtt all` +- Flash with J-Link: + `cd examples/device/cdc_msc && make BOARD=stm32h743eval LOG=2 LOGGER=rtt flash-jlink` +- Launch GDB server (keep this running in terminal 1): + `JLinkGDBServer -device stm32h743xi -if SWD -speed 4000 -port 2331 -swoport 2332 -telnetport 2333 -RTTTelnetPort 19021 -nogui` +- Read RTT output (terminal 2): + `JLinkRTTClient` +- Capture RTT to file (optional): + `JLinkRTTClient | tee rtt.log` +- For non-interactive capture: + `timeout 20s JLinkRTTClient > rtt.log` +- Use the board-specific `JLINK_DEVICE` from `hw/bsp/*/boards/*/board.mk` if you are not using `stm32h743eval`. + ## Unit Testing - Install Ceedling: `sudo gem install ceedling` diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index f19c4a327..8f6dd7200 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -127,7 +127,7 @@ static bool acm_set_control_line_state(cdch_interface_t *p_cdc, tuh_xfer_cb_ static uint16_t const ftdi_vid_pid_list[][2] = {CFG_TUH_CDC_FTDI_VID_PID_LIST}; static uint16_t ftdi_open(uint8_t daddr, const tusb_desc_interface_t *itf_desc, uint16_t max_len); -static bool ftdi_proccess_set_config(cdch_interface_t *p_cdc, tuh_xfer_t *xfer); +static bool ftdi_process_set_config(cdch_interface_t *p_cdc, tuh_xfer_t *xfer); static void ftdi_internal_control_complete(cdch_interface_t *p_cdc, tuh_xfer_t *xfer); static bool ftdi_set_baudrate(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data); static bool ftdi_set_data_format(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data); @@ -216,82 +216,84 @@ typedef struct { #define DRIVER_NAME_DECLARE(_str) #endif +// clang-format off // Note driver list must be in the same order as SERIAL_DRIVER enum static const cdch_serial_driver_t serial_drivers[] = { { - .vid_pid_list = NULL, - .vid_pid_count = 0, - .open = acm_open, - .process_set_config = acm_process_set_config, - .request_complete = acm_internal_control_complete, - .set_control_line_state = acm_set_control_line_state, - .set_baudrate = acm_set_line_coding, - .set_data_format = acm_set_line_coding, - .set_line_coding = acm_set_line_coding, - DRIVER_NAME_DECLARE("ACM") + .vid_pid_list = NULL, + .vid_pid_count = 0, + .open = acm_open, + .process_set_config = acm_process_set_config, + .request_complete = acm_internal_control_complete, + .set_control_line_state = acm_set_control_line_state, + .set_baudrate = acm_set_line_coding, + .set_data_format = acm_set_line_coding, + .set_line_coding = acm_set_line_coding, + DRIVER_NAME_DECLARE("ACM") }, #if CFG_TUH_CDC_FTDI { - .vid_pid_list = ftdi_vid_pid_list, - .vid_pid_count = TU_ARRAY_SIZE(ftdi_vid_pid_list), - .open = ftdi_open, - .process_set_config = ftdi_proccess_set_config, - .request_complete = ftdi_internal_control_complete, - .set_control_line_state = ftdi_set_modem_ctrl, - .set_baudrate = ftdi_set_baudrate, - .set_data_format = ftdi_set_data_format, - .set_line_coding = NULL, // 2 stage set line coding - DRIVER_NAME_DECLARE("FTDI") + .vid_pid_list = ftdi_vid_pid_list, + .vid_pid_count = TU_ARRAY_SIZE(ftdi_vid_pid_list), + .open = ftdi_open, + .process_set_config = ftdi_process_set_config, + .request_complete = ftdi_internal_control_complete, + .set_control_line_state = ftdi_set_modem_ctrl, + .set_baudrate = ftdi_set_baudrate, + .set_data_format = ftdi_set_data_format, + .set_line_coding = NULL, // 2 stage set line coding + DRIVER_NAME_DECLARE("FTDI") }, #endif #if CFG_TUH_CDC_CP210X { - .vid_pid_list = cp210x_vid_pid_list, - .vid_pid_count = TU_ARRAY_SIZE(cp210x_vid_pid_list), - .open = cp210x_open, - .process_set_config = cp210x_process_set_config, - .request_complete = cp210x_internal_control_complete, - .set_control_line_state = cp210x_set_modem_ctrl, - .set_baudrate = cp210x_set_baudrate, - .set_data_format = cp210x_set_data_format, - .set_line_coding = NULL, // 2 stage set line coding - DRIVER_NAME_DECLARE("CP210x") + .vid_pid_list = cp210x_vid_pid_list, + .vid_pid_count = TU_ARRAY_SIZE(cp210x_vid_pid_list), + .open = cp210x_open, + .process_set_config = cp210x_process_set_config, + .request_complete = cp210x_internal_control_complete, + .set_control_line_state = cp210x_set_modem_ctrl, + .set_baudrate = cp210x_set_baudrate, + .set_data_format = cp210x_set_data_format, + .set_line_coding = NULL, // 2 stage set line coding + DRIVER_NAME_DECLARE("CP210x") }, #endif #if CFG_TUH_CDC_CH34X { - .vid_pid_list = ch34x_vid_pid_list, - .vid_pid_count = TU_ARRAY_SIZE(ch34x_vid_pid_list), - .open = ch34x_open, - .process_set_config = ch34x_process_set_config, - .request_complete = ch34x_internal_control_complete, - - .set_control_line_state = ch34x_set_modem_ctrl, - .set_baudrate = ch34x_set_baudrate, - .set_data_format = ch34x_set_data_format, - .set_line_coding = NULL, // 2 stage set line coding - DRIVER_NAME_DECLARE("CH34x") + .vid_pid_list = ch34x_vid_pid_list, + .vid_pid_count = TU_ARRAY_SIZE(ch34x_vid_pid_list), + .open = ch34x_open, + .process_set_config = ch34x_process_set_config, + .request_complete = ch34x_internal_control_complete, + + .set_control_line_state = ch34x_set_modem_ctrl, + .set_baudrate = ch34x_set_baudrate, + .set_data_format = ch34x_set_data_format, + .set_line_coding = NULL, // 2 stage set line coding + DRIVER_NAME_DECLARE("CH34x") }, #endif #if CFG_TUH_CDC_PL2303 { - .vid_pid_list = pl2303_vid_pid_list, - .vid_pid_count = TU_ARRAY_SIZE(pl2303_vid_pid_list), - .open = pl2303_open, - .process_set_config = pl2303_process_set_config, - .request_complete = pl2303_internal_control_complete, - .set_control_line_state = pl2303_set_modem_ctrl, - .set_baudrate = pl2303_set_line_coding, - .set_data_format = pl2303_set_line_coding, - .set_line_coding = pl2303_set_line_coding, - DRIVER_NAME_DECLARE("PL2303") + .vid_pid_list = pl2303_vid_pid_list, + .vid_pid_count = TU_ARRAY_SIZE(pl2303_vid_pid_list), + .open = pl2303_open, + .process_set_config = pl2303_process_set_config, + .request_complete = pl2303_internal_control_complete, + .set_control_line_state = pl2303_set_modem_ctrl, + .set_baudrate = pl2303_set_line_coding, + .set_data_format = pl2303_set_line_coding, + .set_line_coding = pl2303_set_line_coding, + DRIVER_NAME_DECLARE("PL2303") } #endif }; +// clang-format on TU_VERIFY_STATIC(TU_ARRAY_SIZE(serial_drivers) == SERIAL_DRIVER_COUNT, "Serial driver count mismatch"); @@ -761,7 +763,8 @@ uint16_t cdch_open(uint8_t rhport, uint8_t daddr, const tusb_desc_interface_t *i for (size_t i = 0; i < driver->vid_pid_count; i++) { if (driver->vid_pid_list[i][0] == vid && driver->vid_pid_list[i][1] == pid) { const uint16_t drv_len = driver->open(daddr, itf_desc, max_len); - TU_LOG_DRV("[:%u:%u] CDCh %s open %s\r\n", daddr, itf_desc->bInterfaceNumber, driver->name, drv_len > 0 ? "OK" : "FAILED"); + TU_LOG_DRV("[:%u:%u] CDCh %s open %s\r\n", daddr, itf_desc->bInterfaceNumber, driver->name, + drv_len > 0 ? "OK" : "FAILED"); return drv_len; } } @@ -773,35 +776,16 @@ uint16_t cdch_open(uint8_t rhport, uint8_t daddr, const tusb_desc_interface_t *i return 0; } -bool cdch_set_config(uint8_t daddr, uint8_t itf_num) { - tusb_control_request_t request; - request.wIndex = tu_htole16((uint16_t) itf_num); - uint8_t const idx = tuh_cdc_itf_get_index(daddr, itf_num); - cdch_interface_t *p_cdc = get_itf(idx); - TU_ASSERT(p_cdc && p_cdc->serial_drid < SERIAL_DRIVER_COUNT); - TU_LOG_CDC(p_cdc, "set config"); - - // fake transfer to kick-off process_set_config() - tuh_xfer_t xfer; - xfer.daddr = daddr; - xfer.result = XFER_RESULT_SUCCESS; - xfer.setup = &request; - xfer.user_data = 0; // initial state 0 - cdch_process_set_config(&xfer); - - return true; -} - static void set_config_complete(cdch_interface_t *p_cdc, bool success) { if (success) { const uint8_t idx = get_idx_by_ptr(p_cdc); - p_cdc->mounted = true; + p_cdc->mounted = true; tuh_cdc_mount_cb(idx); // Prepare for incoming data tu_edpt_stream_read_xfer(&p_cdc->stream.rx); } else { // clear the interface entry - p_cdc->daddr = 0; + p_cdc->daddr = 0; p_cdc->bInterfaceNumber = 0; } @@ -810,6 +794,33 @@ static void set_config_complete(cdch_interface_t *p_cdc, bool success) { usbh_driver_set_config_complete(p_cdc->daddr, p_cdc->bInterfaceNumber + itf_offset); } +bool cdch_set_config(uint8_t daddr, uint8_t itf_num) { + const uint8_t idx = tuh_cdc_itf_get_index(daddr, itf_num); + cdch_interface_t *p_cdc = get_itf(idx); + TU_ASSERT(p_cdc && p_cdc->serial_drid < SERIAL_DRIVER_COUNT); + TU_LOG_CDC(p_cdc, "set config"); + + // fake transfer to kick-off process_set_config() + tusb_control_request_t request; + request.wIndex = tu_htole16((uint16_t)itf_num); + + tuh_xfer_t xfer; + xfer.daddr = daddr; + xfer.ep_addr = 0; + xfer.result = XFER_RESULT_SUCCESS; + xfer.setup = &request; + xfer.complete_cb = NULL; + xfer.buffer = NULL; + xfer.user_data = 0; // initial state 0 + + const cdch_serial_driver_t *driver = &serial_drivers[p_cdc->serial_drid]; + if (!driver->process_set_config(p_cdc, &xfer)) { + set_config_complete(p_cdc, false); + } + + return true; +} + static void cdch_process_set_config(tuh_xfer_t *xfer) { cdch_interface_t *p_cdc = get_itf_by_xfer(xfer); TU_ASSERT(p_cdc && p_cdc->serial_drid < SERIAL_DRIVER_COUNT,); @@ -1215,22 +1226,14 @@ static uint16_t ftdi_open(uint8_t daddr, const tusb_desc_interface_t *itf_desc, return drv_len; } -static bool ftdi_proccess_set_config(cdch_interface_t *p_cdc, tuh_xfer_t *xfer) { +static bool ftdi_process_set_config(cdch_interface_t *p_cdc, tuh_xfer_t *xfer) { TU_ASSERT(xfer->result == XFER_RESULT_SUCCESS); const uintptr_t state = xfer->user_data; switch (state) { // from here sequence overtaken from Linux Kernel function ftdi_port_probe() case CONFIG_FTDI_DETERMINE_TYPE: // determine type - if (p_cdc->bInterfaceNumber == 0) { - TU_ASSERT(ftdi_determine_type(p_cdc)); - } else { - // other interfaces have same type as interface 0 - uint8_t const idx_itf0 = tuh_cdc_itf_get_index(xfer->daddr, 0); - cdch_interface_t const *p_cdc_itf0 = get_itf(idx_itf0); - TU_ASSERT(p_cdc_itf0); - p_cdc->ftdi.chip_type = p_cdc_itf0->ftdi.chip_type; - } + TU_ASSERT(ftdi_determine_type(p_cdc)); TU_ATTR_FALLTHROUGH; case CONFIG_FTDI_WRITE_LATENCY: -- cgit v1.3.1 From 4d402194dc506a98ed574233cd542ca7f27ff991 Mon Sep 17 00:00:00 2001 From: Saulo Veríssimo Date: Wed, 25 Feb 2026 12:38:44 -0300 Subject: midi device: add cable-aware stream read (tud_midi_n_demux_stream_read) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The existing tud_midi_n_stream_read() accepts a cable_num parameter but ignores it — all cables share a single FIFO and stream parser state, so data from different virtual cables is silently mixed together. Add tud_midi_n_demux_stream_read() which returns the cable number of the data that was actually read. It peeks at each USB-MIDI event packet header before consuming it and stops when the next packet belongs to a different cable, allowing callers to dispatch per-cable without losing data. Implementation details: - Mirrors the host-side tuh_midi_stream_read() approach: tu_edpt_stream_peek for cable inspection, CIN-based byte count (USB MIDI 1.0 Table 4-1), leftover handling via existing midi_driver_stream_t - *p_cable_num initialized to 0xff sentinel so callers can detect "no data" even when return value is 0 - Cable-change check (total_read > 0 guard) covers both leftover-originated reads and freshly consumed packets - TU_VERIFY uses explicit != NULL comparisons, consistent with codebase style - Note: shares stream->buffer with tud_midi_n_stream_read(); do not mix calls on the same interface - Adds single-interface convenience wrapper tud_midi_demux_stream_read() Closes #1838 --- src/class/midi/midi_device.c | 102 +++++++++++++++++++++++++++++++++++++++++++ src/class/midi/midi_device.h | 12 +++++ 2 files changed, 114 insertions(+) diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index 023a81595..a49cd725b 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -168,6 +168,108 @@ uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void *buffer, ui return total_read; } +// Note: this function shares stream->buffer with tud_midi_n_stream_read(). +// Do not mix calls to both functions on the same interface. +uint32_t tud_midi_n_demux_stream_read(uint8_t itf, uint8_t *p_cable_num, void *buffer, uint32_t bufsize) { + TU_VERIFY(p_cable_num != NULL && buffer != NULL && bufsize > 0, 0); + + midid_interface_t *p_midi = &_midid_itf[itf]; + midi_driver_stream_t *stream = &p_midi->stream_read; + tu_edpt_stream_t *ep_str = &p_midi->ep_stream.rx; + + uint8_t *buf8 = (uint8_t *)buffer; + uint32_t total_read = 0; + + // Initialize to invalid cable so callers can detect "no data" even when + // the return value is 0. + *p_cable_num = 0xff; + + // If there are leftover bytes from a previous partial read, return them first + if (stream->total > 0) { + *p_cable_num = (stream->buffer[0] >> 4) & 0x0f; + const uint8_t count = (uint8_t)tu_min32((uint32_t)(stream->total - stream->index), bufsize); + TU_VERIFY(0 == tu_memcpy_s(buf8, bufsize, stream->buffer + 1 + stream->index, count)); + + total_read += count; + stream->index += count; + buf8 += count; + bufsize -= count; + + if (stream->total == stream->index) { + stream->index = 0; + stream->total = 0; + } + + if (bufsize == 0) { + return total_read; + } + } + + while (bufsize > 0) { + // Peek at next packet header to get cable number without consuming + uint8_t one_byte; + if (!tu_edpt_stream_peek(ep_str, &one_byte)) { + break; + } + + const uint8_t next_cable = (one_byte >> 4) & 0x0f; + + // Stop if cable changed (covers both leftover-originated reads and + // freshly consumed packets — total_read > 0 in either case) + if (total_read > 0 && next_cable != *p_cable_num) { + break; + } + *p_cable_num = next_cable; + + // Consume the packet + if (!tud_midi_n_packet_read(itf, stream->buffer)) { + break; + } + + const uint8_t code_index = stream->buffer[0] & 0x0f; + uint8_t msg_bytes; + + // MIDI 1.0 Table 4-1: Code Index Number Classifications + switch (code_index) { + case MIDI_CIN_MISC: + case MIDI_CIN_CABLE_EVENT: + // Reserved and unused, skip this packet + continue; + + case MIDI_CIN_SYSEX_END_1BYTE: + case MIDI_CIN_1BYTE_DATA: + msg_bytes = 1; + break; + + case MIDI_CIN_SYSCOM_2BYTE: + case MIDI_CIN_SYSEX_END_2BYTE: + case MIDI_CIN_PROGRAM_CHANGE: + case MIDI_CIN_CHANNEL_PRESSURE: + msg_bytes = 2; + break; + + default: + msg_bytes = 3; + break; + } + + const uint8_t count = (uint8_t)tu_min32((uint32_t)msg_bytes, bufsize); + TU_VERIFY(0 == tu_memcpy_s(buf8, bufsize, stream->buffer + 1, count)); + + total_read += count; + buf8 += count; + bufsize -= count; + + if (count < msg_bytes) { + // Output buffer full, save remaining for next call + stream->total = msg_bytes; + stream->index = count; + } + } + + return total_read; +} + bool tud_midi_n_packet_read(uint8_t itf, uint8_t packet[4]) { midid_interface_t *p_midi = &_midid_itf[itf]; tu_edpt_stream_t *ep_str = &p_midi->ep_stream.rx; diff --git a/src/class/midi/midi_device.h b/src/class/midi/midi_device.h index ddbc2f9f0..b80ad544a 100644 --- a/src/class/midi/midi_device.h +++ b/src/class/midi/midi_device.h @@ -66,6 +66,13 @@ uint32_t tud_midi_n_available(uint8_t itf, uint8_t cable_num); // Read byte stream (legacy) uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void *buffer, uint32_t bufsize); +// Read byte stream with cable demultiplexing: returns the cable number of the +// data that was read. Reads from a single cable per call; stops when the next +// packet belongs to a different cable so the caller can dispatch per-cable. +// Note: shares internal state with tud_midi_n_stream_read(); do not mix both +// on the same interface. +uint32_t tud_midi_n_demux_stream_read(uint8_t itf, uint8_t *p_cable_num, void *buffer, uint32_t bufsize); + // Write byte Stream (legacy) uint32_t tud_midi_n_stream_write(uint8_t itf, uint8_t cable_num, const uint8_t *buffer, uint32_t bufsize); @@ -96,6 +103,11 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_midi_stream_read(void *buffer, return tud_midi_n_stream_read(0, 0, buffer, bufsize); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t +tud_midi_demux_stream_read(uint8_t *p_cable_num, void *buffer, uint32_t bufsize) { + return tud_midi_n_demux_stream_read(0, p_cable_num, buffer, bufsize); +} + TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_midi_stream_write(uint8_t cable_num, const uint8_t *buffer, uint32_t bufsize) { return tud_midi_n_stream_write(0, cable_num, buffer, bufsize); -- cgit v1.3.1 From 56fca0076a3ee51ae56dd2fed52b5ac778a2b58e Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 26 Feb 2026 14:33:04 +0700 Subject: refactor, rename to schedule function with usbh_call_after_ms() to use with enumeration delay --- src/common/tusb_private.h | 12 +- src/host/usbh.c | 368 +++++++++++++++++++++------------------------- src/host/usbh_pvt.h | 1 + src/tusb_option.h | 16 +- 4 files changed, 179 insertions(+), 218 deletions(-) diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 43ce7a1df..5a51dfc37 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef TUSB_PRIVATE_H_ -#define TUSB_PRIVATE_H_ +#ifndef TUSB_PRIVATE_H +#define TUSB_PRIVATE_H // Internal Helper used by Host and Device Stack @@ -33,9 +33,11 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Configuration -//--------------------------------------------------------------------+ +typedef void (*tusb_defer_func_t)(uintptr_t param); + + //--------------------------------------------------------------------+ + // Configuration + //--------------------------------------------------------------------+ #define TUP_USBIP_CONTROLLER_NUM 2 extern tusb_role_t _tusb_rhport_role[TUP_USBIP_CONTROLLER_NUM]; diff --git a/src/host/usbh.c b/src/host/usbh.c index f32d1336d..09f6adb15 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -175,9 +175,6 @@ OSAL_QUEUE_DEF(usbh_int_set, _usbh_daqdef, TOTAL_DEVICES, hcd_event_t); static osal_queue_t _usbh_daq; #endif -// Callback after waiting -typedef void (*usbh_wait_delay_cb)(void); - // Control transfers: since most controllers do not support multiple control transfers // on multiple devices concurrently and control transfers are not used much except for // enumeration, we will only execute control transfers one at a time. @@ -196,14 +193,16 @@ typedef struct { uint8_t controller_id; // controller ID uint8_t enumerating_daddr; // device address of the device being enumerated uint8_t attach_debouncing_bm; // bitmask for roothub port attach debouncing - uint8_t enum_failed_count; // see process_enumeration() tuh_bus_info_t dev0_bus; // bus info for dev0 in enumeration usbh_ctrl_xfer_info_t ctrl_xfer_info; // control transfer -#if CFG_TUH_TASK_USE_TIME_MILLIS_API - tuh_xfer_t enum_xfer_retry; // enumeration transfer to retry - usbh_wait_delay_cb enum_wait_delay_cb; // continuation function after waiting - uint32_t enum_wait_deadline; // ticks when the timer expires -#endif + + #if CFG_TUSB_OS_HAS_SCHEDULER == 0 // call after only needed for non-scheduler OS + struct { + tusb_defer_func_t func; + uintptr_t arg; + uint32_t at_ms; + } call_after; + #endif } usbh_data_t; static usbh_data_t _usbh_data = { @@ -365,17 +364,18 @@ TU_ATTR_ALWAYS_INLINE static inline bool usbh_setup_send(uint8_t daddr, const ui return ret; } -TU_ATTR_ALWAYS_INLINE static inline void usbh_wait_delay_ms(uint32_t delay_ms, usbh_wait_delay_cb complete_cb) -{ -#if CFG_TUH_TASK_USE_TIME_MILLIS_API - TU_LOG_USBH("USBH start timer for %u ms\r\n", (unsigned int)delay_ms); - _usbh_data.enum_wait_deadline = tusb_time_millis_api() + delay_ms; - _usbh_data.enum_wait_delay_cb = complete_cb; -#else - TU_LOG_USBH("USBH sleep for %u ms\r\n", (unsigned int)delay_ms); - tusb_time_delay_ms_api(delay_ms); - complete_cb(); -#endif +// For non-scheduler deferred callback. For scheduler OS: blocking delay then callback +static void usbh_call_after_ms(uint32_t ms, tusb_defer_func_t func, uintptr_t param) { + #if CFG_TUSB_OS_HAS_SCHEDULER + TU_LOG_USBH("USBH sleep for %u ms\r\n", (unsigned int)ms); + osal_task_delay(ms); + func(param); + #else + TU_LOG_USBH("USBH start timer for %u ms\r\n", (unsigned int)ms); + _usbh_data.call_after.func = func; + _usbh_data.call_after.arg = param; + _usbh_data.call_after.at_ms = tusb_time_millis_api() + ms; + #endif } TU_ATTR_ALWAYS_INLINE static inline void usbh_device_close(uint8_t rhport, uint8_t daddr) { @@ -389,9 +389,9 @@ TU_ATTR_ALWAYS_INLINE static inline void usbh_device_close(uint8_t rhport, uint8 // invalidate if enumerating if (daddr == _usbh_data.enumerating_daddr) { _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; -#if CFG_TUH_TASK_USE_TIME_MILLIS_API - _usbh_data.enum_wait_delay_cb = NULL; -#endif + #if CFG_TUSB_OS_HAS_SCHEDULER == 0 + _usbh_data.call_after.func = NULL; + #endif } } @@ -546,9 +546,6 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { _usbh_data.controller_id = TUSB_INDEX_INVALID_8; _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; -#if CFG_TUH_TASK_USE_TIME_MILLIS_API - _usbh_data.enum_wait_delay_cb = NULL; -#endif for (uint8_t i = 0; i < TOTAL_DEVICES; i++) { clear_device(&_usbh_devices[i]); @@ -643,16 +640,16 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { return; } -#if CFG_TUH_TASK_USE_TIME_MILLIS_API +#if CFG_TUSB_OS_HAS_SCHEDULER == 0 // Process continuation function if timer is expired - usbh_wait_delay_cb delay_cb = _usbh_data.enum_wait_delay_cb; - if (delay_cb) { - int32_t ms = (int32_t)(_usbh_data.enum_wait_deadline - tusb_time_millis_api()); + tusb_defer_func_t after_cb = _usbh_data.call_after.func; + if (after_cb) { + int32_t ms = (int32_t)(_usbh_data.call_after.at_ms - tusb_time_millis_api()); if (ms <= 0) { // delay expired, run callback now TU_LOG_USBH("USBH run timer callback\r\n"); - _usbh_data.enum_wait_delay_cb = NULL; - delay_cb(); + _usbh_data.call_after.func = NULL; + after_cb(_usbh_data.call_after.arg); } else if (timeout_ms > (uint32_t)ms) { // reduce timeout accordingly timeout_ms = (uint32_t)ms; @@ -1499,10 +1496,9 @@ enum { // USB 2.0 specs 7.1.7 for timing enum { ENUM_IDLE, ENUM_HUB_RERSET, - ENUM_HUB_GET_STATUS_AFTER_RESET, + ENUM_HUB_RESET_COMPLETE, ENUM_HUB_CLEAR_RESET, ENUM_HUB_CLEAR_RESET_COMPLETE, - ENUM_ADDR0_DEVICE_DESC, ENUM_SET_ADDR, ENUM_GET_DEVICE_DESC, @@ -1521,128 +1517,146 @@ enum { }; static uint8_t enum_get_new_address(bool is_hub); -static bool enum_parse_configuration_desc (uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg); -static void enum_full_complete(bool success); -static void process_enumeration(tuh_xfer_t* xfer); +static bool enum_parse_configuration_desc(uint8_t dev_addr, const tusb_desc_configuration_t *desc_cfg); +static void enum_full_complete(bool success); +static void process_enumeration(tuh_xfer_t *xfer); -// continuation functions after waiting -#if CFG_TUH_TASK_USE_TIME_MILLIS_API -static void enum_after_attempt_delay(void); -#endif -static void enum_after_debouncing_delay(void); -static void enum_after_reset_root_delay(void); -static void enum_after_reset_root_post_delay(void); -static void enum_after_reset_recovery_delay(void); -static void enum_after_set_address_recovery_delay(void); -#if CFG_TUH_HUB -static void enum_after_reset_hub_delay(void); -#endif +enum { + ENUM_AFTER_DEBOUNCING_DELAY, + ENUM_AFTER_RESET_ROOT_DELAY, + ENUM_AFTER_RESET_ROOT_POST_DELAY, + ENUM_AFTER_RESET_HUB_DELAY, + ENUM_AFTER_RESET_RECOVERY_DELAY, + ENUM_AFTER_SET_ADDRESS_RECOVERY_DELAY, +}; -// start a new enumeration process -static void enum_new_device(hcd_event_t* event) { - tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; - dev0_bus->rhport = event->rhport; - dev0_bus->hub_addr = event->connection.hub_addr; - dev0_bus->hub_port = event->connection.hub_port; + // fallthrough to avoid recursive call of enum_async_delay() + #if CFG_TUSB_OS_HAS_SCHEDULER + #define ENUM_ASYNC_DELAY_OR_FALLTHROUGH(_ms, _state) \ + osal_task_delay(_ms); \ + TU_ATTR_FALLTHROUGH + #else + #define ENUM_ASYNC_DELAY_OR_FALLTHROUGH(_ms, _state) \ + usbh_call_after_ms(_ms, enum_async_delay, _state); \ + break + #endif - usbh_wait_delay_ms(ENUM_DEBOUNCING_DELAY_MS, enum_after_debouncing_delay); -} +// process async delay in enumeration +static void enum_async_delay(uintptr_t state) { + tuh_bus_info_t *dev0_bus = &_usbh_data.dev0_bus; + switch (state) { + case ENUM_AFTER_DEBOUNCING_DELAY: + if (dev0_bus->hub_addr == 0) { + // connected directly to roothub + _usbh_data.attach_debouncing_bm &= (uint8_t)~TU_BIT(dev0_bus->rhport); // clear roothub debouncing delay + if (!hcd_port_connect_status(dev0_bus->rhport)) { + TU_LOG_USBH("Device unplugged while debouncing\r\n"); + enum_full_complete(false); + return; + } + hcd_port_reset(dev0_bus->rhport); // reset port + ENUM_ASYNC_DELAY_OR_FALLTHROUGH(ENUM_RESET_ROOT_DELAY_MS, ENUM_AFTER_RESET_ROOT_DELAY); + } + #if CFG_TUH_HUB + else { + // connected via hub + TU_VERIFY(dev0_bus->hub_port != 0, ); + TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, + ENUM_HUB_RERSET), ); + break; + } + #endif // hub -static void enum_after_debouncing_delay(void) { - tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; - if (dev0_bus->hub_addr == 0) { - // connected directly to roothub - // USB bus not active and frame number is not available yet. - // need to depend on tusb_time_millis_api() TODO non blocking + case ENUM_AFTER_RESET_ROOT_DELAY: + hcd_port_reset_end(dev0_bus->rhport); + ENUM_ASYNC_DELAY_OR_FALLTHROUGH(ENUM_RESET_ROOT_POST_DELAY_MS, ENUM_AFTER_RESET_ROOT_POST_DELAY); - _usbh_data.attach_debouncing_bm &= (uint8_t) ~TU_BIT(dev0_bus->rhport); // clear roothub debouncing delay + case ENUM_AFTER_RESET_ROOT_POST_DELAY: + if (!hcd_port_connect_status(dev0_bus->rhport)) { + // device unplugged while delaying + enum_full_complete(false); + return; + } - if (!hcd_port_connect_status(dev0_bus->rhport)) { - TU_LOG_USBH("Device unplugged while debouncing\r\n"); - enum_full_complete(false); - return; - } + dev0_bus->speed = hcd_port_speed_get(dev0_bus->rhport); + TU_LOG_USBH("%s Speed\r\n", tu_str_speed[dev0_bus->speed]); - // reset device - hcd_port_reset(dev0_bus->rhport); - usbh_wait_delay_ms(ENUM_RESET_ROOT_DELAY_MS, enum_after_reset_root_delay); - } - #if CFG_TUH_HUB - else { - // connected via hub - TU_VERIFY(dev0_bus->hub_port != 0,); - TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, - process_enumeration, ENUM_HUB_RERSET),); - } - #endif // hub -} + // fake transfer to kick-off the enumeration process + tuh_xfer_t xfer; + xfer.daddr = 0; + xfer.result = XFER_RESULT_SUCCESS; + xfer.user_data = ENUM_ADDR0_DEVICE_DESC; + process_enumeration(&xfer); + break; -static void enum_after_reset_root_delay(void) { - tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; - hcd_port_reset_end(dev0_bus->rhport); - return usbh_wait_delay_ms(ENUM_RESET_ROOT_POST_DELAY_MS, enum_after_reset_root_post_delay); -} + #if CFG_TUH_HUB + case ENUM_AFTER_RESET_HUB_DELAY: + // get status after reset complete to check for reset change + TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, + ENUM_HUB_CLEAR_RESET), ); + break; + #endif -static void enum_after_reset_root_post_delay(void) { - tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; - if (!hcd_port_connect_status(dev0_bus->rhport)) { - // device unplugged while delaying - enum_full_complete(false); - return; - } + case ENUM_AFTER_RESET_RECOVERY_DELAY: + // TODO probably doesn't need to open/close each enumeration + if (!usbh_edpt_control_open(0, 8)) { + TU_LOG_USBH("Failed to open dev0's control endpoint\r\n"); + enum_full_complete(false); // Stop enumeration gracefully + return; + } + // Get first 8 bytes of device descriptor for control endpoint size + TU_LOG_USBH("Get 8 byte of Device Descriptor\r\n"); + TU_ASSERT(tuh_descriptor_get_device(0, _usbh_epbuf.ctrl, 8, process_enumeration, ENUM_SET_ADDR), ); + break; - dev0_bus->speed = hcd_port_speed_get(dev0_bus->rhport); - TU_LOG_USBH("%s Speed\r\n", tu_str_speed[dev0_bus->speed]); + case ENUM_AFTER_SET_ADDRESS_RECOVERY_DELAY: { + const uint8_t new_addr = _usbh_data.enumerating_daddr; + usbh_device_t *new_dev = get_device(new_addr); + TU_ASSERT(new_dev, ); + if (!usbh_edpt_control_open(new_addr, new_dev->bMaxPacketSize0)) { + TU_LOG_USBH("Failed to open new device's control endpoint\r\n"); + clear_device(new_dev); + enum_full_complete(false); + return; + } + TU_LOG_USBH("Get Device Descriptor\r\n"); + TU_ASSERT(tuh_descriptor_get_device(new_addr, _usbh_epbuf.ctrl, sizeof(tusb_desc_device_t), process_enumeration, + ENUM_GET_STRING_LANGUAGE_ID_LEN), ); + break; + } - // fake transfer to kick-off the enumeration process - tuh_xfer_t xfer; - xfer.daddr = 0; - xfer.result = XFER_RESULT_SUCCESS; - xfer.user_data = ENUM_ADDR0_DEVICE_DESC; - process_enumeration(&xfer); + default: + break; + } } -enum { - ATTEMPT_COUNT_MAX = 3, - ATTEMPT_DELAY_MS = 100 -}; +// start a new enumeration process +static void enum_new_device(hcd_event_t *event) { + tuh_bus_info_t *dev0_bus = &_usbh_data.dev0_bus; + dev0_bus->rhport = event->rhport; + dev0_bus->hub_addr = event->connection.hub_addr; + dev0_bus->hub_port = event->connection.hub_port; + usbh_call_after_ms(ENUM_DEBOUNCING_DELAY_MS, enum_async_delay, ENUM_AFTER_DEBOUNCING_DELAY); +} // process device enumeration -static void process_enumeration(tuh_xfer_t* xfer) { - // Retry a few times while enumerating since device can be unstable when starting up - _usbh_data.enum_failed_count = 0; +static void process_enumeration(tuh_xfer_t *xfer) { if (XFER_RESULT_FAILED == xfer->result) { - - // retry if not reaching max attempt - _usbh_data.enum_failed_count++; - bool retry = (_usbh_data.enumerating_daddr != TUSB_INDEX_INVALID_8) && (_usbh_data.enum_failed_count < ATTEMPT_COUNT_MAX); - if (retry) { -#if CFG_TUH_TASK_USE_TIME_MILLIS_API - // save transfer for later - _usbh_data.enum_xfer_retry = *xfer; - usbh_wait_delay_ms(ATTEMPT_DELAY_MS, enum_after_attempt_delay); // wait for reset to take effect -#else - if (!tuh_control_xfer(xfer)) - enum_full_complete(false); // complete as failed -#endif - } else { - enum_full_complete(false); // complete as failed - } + enum_full_complete(false); // failed to enum return; } - _usbh_data.enum_failed_count = 0; - uint8_t const daddr = xfer->daddr; - uintptr_t const state = xfer->user_data; - usbh_device_t* dev = get_device(daddr); - tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; + const uint8_t daddr = xfer->daddr; + const uintptr_t state = xfer->user_data; + usbh_device_t *dev = get_device(daddr); + tuh_bus_info_t *dev0_bus = &_usbh_data.dev0_bus; if (daddr > 0) { TU_ASSERT(dev != NULL,); } uint16_t langid = 0x0409; // default is English switch (state) { - #if CFG_TUH_HUB + #if CFG_TUH_HUB case ENUM_HUB_RERSET: { hub_port_status_response_t port_status; hub_port_get_status_local(dev0_bus->hub_addr, dev0_bus->hub_port, &port_status); @@ -1653,14 +1667,14 @@ static void process_enumeration(tuh_xfer_t* xfer) { return; } - TU_ASSERT(hub_port_reset(dev0_bus->hub_addr, dev0_bus->hub_port, process_enumeration, ENUM_HUB_GET_STATUS_AFTER_RESET),); + TU_ASSERT(hub_port_reset(dev0_bus->hub_addr, dev0_bus->hub_port, process_enumeration, ENUM_HUB_RESET_COMPLETE), ); break; } - case ENUM_HUB_GET_STATUS_AFTER_RESET: { - usbh_wait_delay_ms(ENUM_RESET_HUB_DELAY_MS, enum_after_reset_hub_delay); // wait for reset to take effect + case ENUM_HUB_RESET_COMPLETE: + // wait for reset to take effect + usbh_call_after_ms(ENUM_RESET_HUB_DELAY_MS, enum_async_delay, ENUM_AFTER_RESET_HUB_DELAY); break; - } case ENUM_HUB_CLEAR_RESET: { hub_port_status_response_t port_status; @@ -1687,17 +1701,17 @@ static void process_enumeration(tuh_xfer_t* xfer) { return; } - dev0_bus->speed = (port_status.status.high_speed) ? TUSB_SPEED_HIGH : - (port_status.status.low_speed) ? TUSB_SPEED_LOW : TUSB_SPEED_FULL; + dev0_bus->speed = (port_status.status.high_speed) ? TUSB_SPEED_HIGH + : (port_status.status.low_speed) ? TUSB_SPEED_LOW + : TUSB_SPEED_FULL; TU_ATTR_FALLTHROUGH; } - #endif + #endif - case ENUM_ADDR0_DEVICE_DESC: { - usbh_wait_delay_ms(ENUM_RESET_RECOVERY_DELAY_MS, enum_after_reset_recovery_delay); + case ENUM_ADDR0_DEVICE_DESC: + usbh_call_after_ms(ENUM_RESET_RECOVERY_DELAY_MS, enum_async_delay, ENUM_AFTER_RESET_RECOVERY_DELAY); break; - } case ENUM_SET_ADDR: { const tusb_desc_device_t *desc_device = (const tusb_desc_device_t *) _usbh_epbuf.ctrl; @@ -1709,20 +1723,19 @@ static void process_enumeration(tuh_xfer_t* xfer) { new_dev->connected = 1; new_dev->bMaxPacketSize0 = desc_device->bMaxPacketSize0; - TU_ASSERT(tuh_address_set(0, new_addr, process_enumeration, ENUM_GET_DEVICE_DESC),); + TU_ASSERT(tuh_address_set(0, new_addr, process_enumeration, ENUM_GET_DEVICE_DESC), ); break; } case ENUM_GET_DEVICE_DESC: { - const uint8_t new_addr = (uint8_t) tu_le16toh(xfer->setup->wValue); - usbh_device_t* new_dev = get_device(new_addr); - TU_ASSERT(new_dev,); - new_dev->addressed = 1; + const uint8_t new_addr = (uint8_t)tu_le16toh(xfer->setup->wValue); + usbh_device_t *new_dev = get_device(new_addr); + TU_ASSERT(new_dev, ); + new_dev->addressed = 1; _usbh_data.enumerating_daddr = new_addr; usbh_device_close(dev0_bus->rhport, 0); // close dev0 - - usbh_wait_delay_ms(ENUM_SET_ADDRESS_RECOVERY_DELAY_MS, enum_after_set_address_recovery_delay); + usbh_call_after_ms(ENUM_SET_ADDRESS_RECOVERY_DELAY_MS, enum_async_delay, ENUM_AFTER_SET_ADDRESS_RECOVERY_DELAY); break; } @@ -1896,53 +1909,6 @@ static void process_enumeration(tuh_xfer_t* xfer) { } } -#if CFG_TUH_TASK_USE_TIME_MILLIS_API -static void enum_after_attempt_delay(void) { - TU_LOG_USBH("Enumeration attempt %u/%u\r\n", _usbh_data.enum_failed_count+1, ATTEMPT_COUNT_MAX); - if (!tuh_control_xfer(&_usbh_data.enum_xfer_retry)) - enum_full_complete(false); // complete as failed -} -#endif - -static void enum_after_set_address_recovery_delay(void) { - const uint8_t new_addr =_usbh_data.enumerating_daddr; - usbh_device_t* new_dev = get_device(new_addr); - TU_ASSERT(new_dev,); - if (!usbh_edpt_control_open(new_addr, new_dev->bMaxPacketSize0)) { // open new control endpoint - // Stop enumeration gracefully - clear_device(new_dev); - enum_full_complete(false); - TU_ASSERT(false,); - } - - TU_LOG_USBH("Get Device Descriptor\r\n"); - TU_ASSERT(tuh_descriptor_get_device(new_addr, _usbh_epbuf.ctrl, sizeof(tusb_desc_device_t), - process_enumeration, ENUM_GET_STRING_LANGUAGE_ID_LEN),); -} - -static void enum_after_reset_recovery_delay(void) { - // TODO probably doesn't need to open/close each enumeration - uint8_t const addr0 = 0; - if (!usbh_edpt_control_open(addr0, 8)) { - // Stop enumeration gracefully - enum_full_complete(false); - TU_ASSERT(false,); - } - - // Get first 8 bytes of device descriptor for control endpoint size - TU_LOG_USBH("Get 8 byte of Device Descriptor\r\n"); - TU_ASSERT(tuh_descriptor_get_device(addr0, _usbh_epbuf.ctrl, 8, - process_enumeration, ENUM_SET_ADDR),); -} - -#if CFG_TUH_HUB -static void enum_after_reset_hub_delay(void) { - tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; - // get status to check for reset change - TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, ENUM_HUB_CLEAR_RESET),); -} -#endif - static uint8_t enum_get_new_address(bool is_hub) { uint8_t start; uint8_t end; @@ -2060,13 +2026,13 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { static void enum_full_complete(bool success) { (void)success; - // mark enumeration as complete - _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; -#if CFG_TUH_TASK_USE_TIME_MILLIS_API - _usbh_data.enum_wait_delay_cb = NULL; -#endif -#if CFG_TUH_HUB + _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; // mark enumeration as complete + #if CFG_TUSB_OS_HAS_SCHEDULER == 0 + _usbh_data.call_after.func = NULL; + #endif + + #if CFG_TUH_HUB // Hub status is already requested in case of successful enumeration if (_usbh_data.dev0_bus.hub_addr != 0 && !success) { hub_edpt_status_xfer(_usbh_data.dev0_bus.hub_addr); // get next hub status diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index 57428e3c5..ecb692e9d 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -68,6 +68,7 @@ uint8_t* usbh_get_enum_buf(void); void usbh_int_set(bool enabled); +// Invoke this function later in tuh_task() by putting it into task queue void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr); void usbh_spin_lock(bool in_isr); diff --git a/src/tusb_option.h b/src/tusb_option.h index 2cac501f7..44ba8879a 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -469,7 +469,6 @@ #define TUP_MCU_STRICT_ALIGN 0 #endif - //--------------------------------------------------------------------+ // Common Options (Default) //--------------------------------------------------------------------+ @@ -514,6 +513,10 @@ #define CFG_TUSB_OS OPT_OS_NONE #endif +#ifndef CFG_TUSB_OS_HAS_SCHEDULER + #define CFG_TUSB_OS_HAS_SCHEDULER (CFG_TUSB_OS != OPT_OS_NONE && CFG_TUSB_OS != OPT_OS_PICO) +#endif + #ifndef CFG_TUSB_OS_INC_PATH #ifndef CFG_TUSB_OS_INC_PATH_DEFAULT #define CFG_TUSB_OS_INC_PATH_DEFAULT @@ -698,17 +701,6 @@ #define CFG_TUH_TASK_EVENTS_PER_RUN 16 #endif -// use tusb_time_millis_api() instead of tusb_time_delay_ms_api() in tuh_task() -// tuh_task_ext() will be asynchronous and never sleep in tusb_time_delay_ms_api() -#ifndef CFG_TUH_TASK_USE_TIME_MILLIS_API - #if CFG_TUSB_OS == OPT_OS_RTX4 || CFG_TUSB_OS == OPT_OS_PICO || defined(ESP_PLATFORM) - // these boards/os do not implements the required tusb_time_millis_api() - #define CFG_TUH_TASK_USE_TIME_MILLIS_API 0 - #else - #define CFG_TUH_TASK_USE_TIME_MILLIS_API 1 - #endif -#endif - //------------- CLASS -------------// #ifndef CFG_TUH_HUB -- cgit v1.3.1 From abdf3452ac5657d880d944201ef21ff18263311a Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 26 Feb 2026 16:36:40 +0700 Subject: revert usbh dedicated queue for attached event --- src/host/usbh.c | 116 +++++++++++++++++++++----------------------------------- 1 file changed, 43 insertions(+), 73 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index 09f6adb15..ef2e22a16 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -169,12 +169,6 @@ static OSAL_SPINLOCK_DEF(_usbh_spin, usbh_int_set); OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); static osal_queue_t _usbh_q; -#if CFG_TUH_HUB -// Deferred attachment queue -OSAL_QUEUE_DEF(usbh_int_set, _usbh_daqdef, TOTAL_DEVICES, hcd_event_t); -static osal_queue_t _usbh_daq; -#endif - // Control transfers: since most controllers do not support multiple control transfers // on multiple devices concurrently and control transfers are not used much except for // enumeration, we will only execute control transfers one at a time. @@ -189,6 +183,12 @@ typedef struct { uint8_t failed_count; } usbh_ctrl_xfer_info_t; +typedef struct { + tusb_defer_func_t func; + uintptr_t arg; + uint32_t at_ms; +} usbh_call_after_t; + typedef struct { uint8_t controller_id; // controller ID uint8_t enumerating_daddr; // device address of the device being enumerated @@ -197,11 +197,7 @@ typedef struct { usbh_ctrl_xfer_info_t ctrl_xfer_info; // control transfer #if CFG_TUSB_OS_HAS_SCHEDULER == 0 // call after only needed for non-scheduler OS - struct { - tusb_defer_func_t func; - uintptr_t arg; - uint32_t at_ms; - } call_after; + usbh_call_after_t call_after; #endif } usbh_data_t; @@ -330,7 +326,6 @@ static void process_remove_event(hcd_event_t *event); static void remove_device_tree(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port); static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); -static void usbh_task_mq(uint32_t timeout_ms, bool in_isr); TU_ATTR_ALWAYS_INLINE static inline usbh_device_t* get_device(uint8_t dev_addr) { TU_VERIFY(dev_addr > 0 && dev_addr <= TOTAL_DEVICES, NULL); @@ -365,17 +360,20 @@ TU_ATTR_ALWAYS_INLINE static inline bool usbh_setup_send(uint8_t daddr, const ui } // For non-scheduler deferred callback. For scheduler OS: blocking delay then callback -static void usbh_call_after_ms(uint32_t ms, tusb_defer_func_t func, uintptr_t param) { +static bool usbh_call_after_ms(uint32_t ms, tusb_defer_func_t func, uintptr_t param) { #if CFG_TUSB_OS_HAS_SCHEDULER TU_LOG_USBH("USBH sleep for %u ms\r\n", (unsigned int)ms); osal_task_delay(ms); func(param); #else + TU_ASSERT(_usbh_data.call_after.func == NULL); TU_LOG_USBH("USBH start timer for %u ms\r\n", (unsigned int)ms); _usbh_data.call_after.func = func; _usbh_data.call_after.arg = param; _usbh_data.call_after.at_ms = tusb_time_millis_api() + ms; #endif + + return true; } TU_ATTR_ALWAYS_INLINE static inline void usbh_device_close(uint8_t rhport, uint8_t daddr) { @@ -525,12 +523,6 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { _usbh_q = osal_queue_create(&_usbh_qdef); TU_ASSERT(_usbh_q != NULL); -#if CFG_TUH_HUB - // Deferred attachment queue - _usbh_daq = osal_queue_create(&_usbh_daqdef); - TU_ASSERT(_usbh_daq != NULL); -#endif - #if OSAL_MUTEX_REQUIRED // Init mutex _usbh_mutex = osal_mutex_create(&_usbh_mutexdef); @@ -596,11 +588,6 @@ bool tuh_deinit(uint8_t rhport) { osal_queue_delete(_usbh_q); _usbh_q = NULL; -#if CFG_TUH_HUB - osal_queue_delete(_usbh_daq); - _usbh_daq = NULL; -#endif - #if OSAL_MUTEX_REQUIRED // TODO make sure there is no task waiting on this mutex osal_mutex_delete(_usbh_mutex); @@ -640,51 +627,30 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { return; } -#if CFG_TUSB_OS_HAS_SCHEDULER == 0 - // Process continuation function if timer is expired - tusb_defer_func_t after_cb = _usbh_data.call_after.func; - if (after_cb) { - int32_t ms = (int32_t)(_usbh_data.call_after.at_ms - tusb_time_millis_api()); - if (ms <= 0) { - // delay expired, run callback now - TU_LOG_USBH("USBH run timer callback\r\n"); - _usbh_data.call_after.func = NULL; - after_cb(_usbh_data.call_after.arg); - } else if (timeout_ms > (uint32_t)ms) { - // reduce timeout accordingly - timeout_ms = (uint32_t)ms; - } - } -#endif - -#if CFG_TUH_HUB - // Process deferred device attachments - if (_usbh_data.enumerating_daddr == TUSB_INDEX_INVALID_8) { - hcd_event_t event; - if (osal_queue_receive(_usbh_daq, &event, 0)) { - // We are ready to process a new attachment - TU_LOG_USBH("[%u:] USBH Deferred Device Attach\r\n", event.rhport); - _usbh_data.enumerating_daddr = 0; // enumerate new device with address 0 - enum_new_device(&event); - } - } -#endif - - // Process the message queue - usbh_task_mq(timeout_ms, in_isr); -} - -static void usbh_task_mq(uint32_t timeout_ms, bool in_isr) { (void) in_isr; // not implemented yet // Loop until there are no more events in the queue or CFG_TUH_TASK_EVENTS_PER_RUN is reached for (unsigned epr = 0;; epr++) { -#if CFG_TUH_TASK_EVENTS_PER_RUN > 0 + #if CFG_TUH_TASK_EVENTS_PER_RUN > 0 if (epr >= CFG_TUH_TASK_EVENTS_PER_RUN) { TU_LOG_USBH("USBH event limit (" TU_XSTRING(CFG_TUH_TASK_EVENTS_PER_RUN) ") reached\r\n"); break; } -#endif + #endif + + #if CFG_TUSB_OS_HAS_SCHEDULER == 0 + // Process call_after_ms function if ms is reached + tusb_defer_func_t after_cb = _usbh_data.call_after.func; + if (after_cb) { + uint32_t ms = tusb_time_millis_api(); + if (ms >= _usbh_data.call_after.at_ms) { + TU_LOG_USBH("USBH run timer callback\r\n"); + _usbh_data.call_after.func = NULL; + after_cb(_usbh_data.call_after.arg); + } + } + #endif + hcd_event_t event; if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) { return; } @@ -701,12 +667,14 @@ static void usbh_task_mq(uint32_t timeout_ms, bool in_isr) { TU_LOG_USBH("[%u:] USBH Device Attach\r\n", event.rhport); _usbh_data.enumerating_daddr = 0; // enumerate new device with address 0 enum_new_device(&event); -#if CFG_TUH_HUB } else { // currently enumerating another device TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); - TU_ASSERT(osal_queue_send(_usbh_daq, &event, in_isr),); -#endif + const bool is_empty = osal_queue_empty(_usbh_q); + queue_event(&event, in_isr); + if (is_empty) { + return; // Exit if this is the only event in the queue, otherwise we loop forever + } } break; @@ -784,10 +752,12 @@ static void usbh_task_mq(uint32_t timeout_ms, bool in_isr) { break; } -#if CFG_TUSB_OS != OPT_OS_NONE && CFG_TUSB_OS != OPT_OS_PICO - // return if there is no more events, for application to run other background - if (osal_queue_empty(_usbh_q)) return; -#endif + #if CFG_TUSB_OS_HAS_SCHEDULER + // return if there are no more events, for application to run other backgrounds + if (osal_queue_empty(_usbh_q)) { + return; + } + #endif } } @@ -845,8 +815,8 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { while (result == XFER_RESULT_INVALID) { // Note: this can be called within an callback ie. part of tuh_task() - // therefore even with RTOS usbh_task_mq() still need to be invoked - usbh_task_mq(0, false); + // therefore even with RTOS tuh_task_ext() still need to be invoked + tuh_task_ext(0, false); // TODO probably some timeout to prevent hanged } @@ -1944,10 +1914,10 @@ static bool enum_parse_configuration_desc(uint8_t dev_addr, tusb_desc_configurat TU_LOG_USBH("Parsing Configuration descriptor (wTotalLength = %u)\r\n", total_len); - // parse each interfaces + // parse all interfaces while (tu_desc_in_bounds(p_desc, desc_end)) { if (0 == tu_desc_len(p_desc)) { - // A zero length descriptor indicates that the device is off spec (e.g. wrong wTotalLength). + // A zero-length descriptor indicates that the device is off spec (e.g. wrong wTotalLength). // Parsed interfaces should still be usable TU_LOG_USBH("Encountered a zero-length descriptor after %" PRIu32 " bytes\r\n", (uint32_t)p_desc - (uint32_t)desc_cfg); break; @@ -1963,7 +1933,7 @@ static bool enum_parse_configuration_desc(uint8_t dev_addr, tusb_desc_configurat // uint16_t const drv_len = tu_desc_get_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) // (desc_end-p_desc)); TU_ASSERT(drv_len >= sizeof(tusb_desc_interface_t)); - // Find driver for this interface + // Find a driver for this interface const uint16_t remaining_len = (uint16_t)(desc_end - p_desc); uint8_t drv_id; for (drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { -- cgit v1.3.1 From fd933642df6a687d4452275d277e9479870f806c Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 26 Feb 2026 18:02:09 +0700 Subject: fix fallthrough --- src/host/usbh.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index ef2e22a16..76269eb2f 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -1516,7 +1516,16 @@ static void enum_async_delay(uintptr_t state) { tuh_bus_info_t *dev0_bus = &_usbh_data.dev0_bus; switch (state) { case ENUM_AFTER_DEBOUNCING_DELAY: - if (dev0_bus->hub_addr == 0) { + #if CFG_TUH_HUB + if (dev0_bus->hub_addr != 0) { + // connected via hub + TU_VERIFY(dev0_bus->hub_port != 0, ); + TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, + ENUM_HUB_RERSET), ); + break; + } else + #endif + { // connected directly to roothub _usbh_data.attach_debouncing_bm &= (uint8_t)~TU_BIT(dev0_bus->rhport); // clear roothub debouncing delay if (!hcd_port_connect_status(dev0_bus->rhport)) { @@ -1527,15 +1536,6 @@ static void enum_async_delay(uintptr_t state) { hcd_port_reset(dev0_bus->rhport); // reset port ENUM_ASYNC_DELAY_OR_FALLTHROUGH(ENUM_RESET_ROOT_DELAY_MS, ENUM_AFTER_RESET_ROOT_DELAY); } - #if CFG_TUH_HUB - else { - // connected via hub - TU_VERIFY(dev0_bus->hub_port != 0, ); - TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, - ENUM_HUB_RERSET), ); - break; - } - #endif // hub case ENUM_AFTER_RESET_ROOT_DELAY: hcd_port_reset_end(dev0_bus->rhport); -- cgit v1.3.1 From 5095ec97d872d51bd338e49987d8e336b9939628 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 28 Nov 2025 19:46:11 +0100 Subject: Add a dynamic switch example Signed-off-by: HiFiPhile --- examples/dual/CMakeLists.txt | 1 + examples/dual/dynamic_switch/CMakeLists.txt | 30 ++ examples/dual/dynamic_switch/CMakePresets.json | 6 + examples/dual/dynamic_switch/Makefile | 16 + examples/dual/dynamic_switch/README.md | 60 +++ examples/dual/dynamic_switch/only.txt | 10 + examples/dual/dynamic_switch/src/CMakeLists.txt | 4 + examples/dual/dynamic_switch/src/main.c | 494 +++++++++++++++++++++ examples/dual/dynamic_switch/src/tusb_config.h | 158 +++++++ examples/dual/dynamic_switch/src/usb_descriptors.c | 199 +++++++++ hw/bsp/stm32f2/family.c | 2 +- hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h | 2 +- 12 files changed, 980 insertions(+), 2 deletions(-) create mode 100644 examples/dual/dynamic_switch/CMakeLists.txt create mode 100644 examples/dual/dynamic_switch/CMakePresets.json create mode 100644 examples/dual/dynamic_switch/Makefile create mode 100644 examples/dual/dynamic_switch/README.md create mode 100644 examples/dual/dynamic_switch/only.txt create mode 100644 examples/dual/dynamic_switch/src/CMakeLists.txt create mode 100644 examples/dual/dynamic_switch/src/main.c create mode 100644 examples/dual/dynamic_switch/src/tusb_config.h create mode 100644 examples/dual/dynamic_switch/src/usb_descriptors.c diff --git a/examples/dual/CMakeLists.txt b/examples/dual/CMakeLists.txt index 4978f1fab..8727ea938 100644 --- a/examples/dual/CMakeLists.txt +++ b/examples/dual/CMakeLists.txt @@ -12,6 +12,7 @@ else () set(EXAMPLE_LIST host_hid_to_device_cdc host_info_to_device_cdc + dynamic_switch ) foreach (example ${EXAMPLE_LIST}) diff --git a/examples/dual/dynamic_switch/CMakeLists.txt b/examples/dual/dynamic_switch/CMakeLists.txt new file mode 100644 index 000000000..7cad30727 --- /dev/null +++ b/examples/dual/dynamic_switch/CMakeLists.txt @@ -0,0 +1,30 @@ +cmake_minimum_required(VERSION 3.20) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +project(dynamic_switch C CXX ASM) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) + +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + +add_executable(${PROJECT_NAME}) + +# Example source +target_sources(${PROJECT_NAME} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT_NAME} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_dual_usb_example(${PROJECT_NAME} noos) diff --git a/examples/dual/dynamic_switch/CMakePresets.json b/examples/dual/dynamic_switch/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/dual/dynamic_switch/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/dynamic_switch/Makefile b/examples/dual/dynamic_switch/Makefile new file mode 100644 index 000000000..44ab54ad7 --- /dev/null +++ b/examples/dual/dynamic_switch/Makefile @@ -0,0 +1,16 @@ +include ../../../hw/bsp/family_support.mk + +INC += \ + src \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) + +# Include device and host stack +SRC_C += \ + src/class/cdc/cdc_device.c \ + src/host/hub.c \ + src/host/usbh.c + +include ../../../hw/bsp/family_rules.mk diff --git a/examples/dual/dynamic_switch/README.md b/examples/dual/dynamic_switch/README.md new file mode 100644 index 000000000..034787f18 --- /dev/null +++ b/examples/dual/dynamic_switch/README.md @@ -0,0 +1,60 @@ +# Dynamic Switch Example + +This example demonstrates TinyUSB's dual-role capability by allowing runtime switching between USB device and host modes. + +## Features + +- **Button-triggered mode switching**: Press the board button to switch between device and host modes +- **Device Mode**: Acts as a USB CDC (Virtual Serial Port) that echoes all received data +- **Host Mode**: Enumerates connected USB devices and prints device information +- **Dynamic switching**: Deinitializes the current stack and reinitializes in the new mode + +## Usage + +1. **Build and flash** the example to your board +2. **Default behavior**: The board starts in **Device mode** +3. **Device mode**: + - Connect the board to a PC + - Open a serial terminal (e.g., `screen /dev/ttyACM0` or PuTTY) + - Type characters - they will be echoed back to you +4. **Switch to Host mode**: + - Press the board button + - Connect a USB device to the board + - The board will enumerate the device and print its descriptors to the debug console +5. **Switch back to Device mode**: Press the button again + +## LED Patterns + +The onboard LED indicates the USB connection status: + +- **Fast blink (250ms)**: Not mounted/connected +- **Slow blink (1000ms)**: Successfully mounted/connected +- **Very slow blink (2500ms)**: Suspended (device mode only) + +## Serial Output + +The example prints status messages to the debug UART: + +``` +====================================== +TinyUSB Dynamic Switch Example +Press button to switch between device and host modes +Starting in DEVICE mode... +====================================== + +[DEVICE] Mounted + +--- Switching USB mode --- +Stopping DEVICE mode... +Starting HOST mode... +Mode switch complete! + +[HOST] Device attached, address = 1 +Device 1: ID 1234:5678 SN ABC123 +Device Descriptor: + bLength 18 + bDescriptorType 1 + bcdUSB 0200 + bDeviceClass 239 + ... +``` diff --git a/examples/dual/dynamic_switch/only.txt b/examples/dual/dynamic_switch/only.txt new file mode 100644 index 000000000..8508780e6 --- /dev/null +++ b/examples/dual/dynamic_switch/only.txt @@ -0,0 +1,10 @@ +family:espressif +mcu:STM32C0 +mcu:STM32G0 +mcu:STM32H5 +mcu:STM32F2 +mcu:STM32F4 +mcu:STM32U5 +mcu:STM32F7 +mcu:STM32H7 +mcu:STM32H7RS diff --git a/examples/dual/dynamic_switch/src/CMakeLists.txt b/examples/dual/dynamic_switch/src/CMakeLists.txt new file mode 100644 index 000000000..cef2b46ee --- /dev/null +++ b/examples/dual/dynamic_switch/src/CMakeLists.txt @@ -0,0 +1,4 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS "main.c" "usb_descriptors.c" + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) diff --git a/examples/dual/dynamic_switch/src/main.c b/examples/dual/dynamic_switch/src/main.c new file mode 100644 index 000000000..bc9dabc66 --- /dev/null +++ b/examples/dual/dynamic_switch/src/main.c @@ -0,0 +1,494 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* This example demonstrates dynamic switching between device and host modes: + * - Press button to switch between device and host modes + * - Device mode: CDC echo (echoes input back to output) + * - Host mode: Prints connected device information + */ + +#include +#include +#include + +#include "bsp/board_api.h" +#include "tusb.h" + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + #ifdef ESP_PLATFORM + #define USBD_STACK_SIZE 4096 + #define USBH_STACK_SIZE 4096 + #else + // Increase stack size when debug log is enabled + #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) + #define USBH_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) + #endif + + #define CDC_STACK_SIZE (configMINIMAL_STACK_SIZE * (CFG_TUSB_DEBUG ? 2 : 1)) + #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE +#endif + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTOTYPES +//--------------------------------------------------------------------+ + +// English +#define LANGUAGE_ID 0x0409 + +/* Blink pattern + * - 250 ms : not mounted + * - 1000 ms : mounted + * - 2500 ms : suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +// static task for FreeRTOS +#if configSUPPORT_STATIC_ALLOCATION +StackType_t blinky_stack[BLINKY_STACK_SIZE]; +StaticTask_t blinky_taskdef; + +StackType_t usb_stack[USBD_STACK_SIZE > USBH_STACK_SIZE ? USBD_STACK_SIZE : USBH_STACK_SIZE]; +StaticTask_t usb_taskdef; + +StackType_t cdc_stack[CDC_STACK_SIZE]; +StaticTask_t cdc_taskdef; +#endif +#endif + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; +static tusb_role_t current_role = TUSB_ROLE_DEVICE; + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +static void usb_task(void *param); +void led_blinking_task(void *param); +void cdc_task(void *params); +#else +void led_blinking_task(void); +void cdc_task(void); +#endif +void usb_mode_switch(void); +static void print_device_info(uint8_t daddr); +static void print_utf16(uint16_t* temp_buf, size_t buf_len); + +// Declare buffer for USB transfer +CFG_TUH_MEM_SECTION struct { + TUH_EPBUF_TYPE_DEF(tusb_desc_device_t, device); + TUH_EPBUF_DEF(serial, 64*sizeof(uint16_t)); + TUH_EPBUF_DEF(buf, 128*sizeof(uint16_t)); +} desc; + +//--------------------------------------------------------------------+ +// Main +//--------------------------------------------------------------------+ + +int main(void) { + board_init(); + + printf("\r\n======================================\r\n"); + printf("TinyUSB Dynamic Switch Example\r\n"); + printf("Press button to switch between device and host modes\r\n"); + printf("Starting in DEVICE mode...\r\n"); + printf("======================================\r\n\r\n"); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // Create FreeRTOS tasks +#if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); + xTaskCreateStatic(usb_task, "usb", USBD_STACK_SIZE > USBH_STACK_SIZE ? USBD_STACK_SIZE : USBH_STACK_SIZE, + NULL, configMAX_PRIORITIES-1, usb_stack, &usb_taskdef); + xTaskCreateStatic(cdc_task, "cdc", CDC_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, cdc_stack, &cdc_taskdef); +#else + xTaskCreate(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, NULL); + xTaskCreate(usb_task, "usb", USBD_STACK_SIZE > USBH_STACK_SIZE ? USBD_STACK_SIZE : USBH_STACK_SIZE, + NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(cdc_task, "cdc", CDC_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, NULL); +#endif + +#ifndef ESP_PLATFORM + // only start scheduler for non-espressif mcu + vTaskStartScheduler(); +#endif + +#else + // Initialize in device mode by default + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_RHPORT, &dev_init); + current_role = TUSB_ROLE_DEVICE; + + board_init_after_tusb(); + + while (1) { + // Check for button press to switch modes + static bool pending_switch = false; + if (board_button_read()) { + if (!pending_switch) { + pending_switch = true; + usb_mode_switch(); + } + } else { + pending_switch = false; + } + + // Process USB tasks based on current mode + if (current_role == TUSB_ROLE_DEVICE) { + tud_task(); + cdc_task(); + } else { + tuh_task(); + } + + led_blinking_task(); + } +#endif +} + +#ifdef ESP_PLATFORM +void app_main(void) { + main(); +} +#endif + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +// USB Task for FreeRTOS +// This top level thread processes all usb events and mode switching +static void usb_task(void *param) { + (void) param; + + // init device stack on configured roothub port + // This should be called after scheduler/kernel is started. + // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_RHPORT, &dev_init); + current_role = TUSB_ROLE_DEVICE; + + board_init_after_tusb(); + + // RTOS forever loop + while (1) { + // Check for button press to switch modes + static bool pending_switch = false; + if (board_button_read()) { + if (!pending_switch) { + pending_switch = true; + usb_mode_switch(); + } + } else { + pending_switch = false; + } + + // Process USB tasks based on current mode + // Use _ext version to allow return and read button state + if (current_role == TUSB_ROLE_DEVICE) { + tud_task_ext(10, false); + } else { + tuh_task_ext(10, false); + } + } +} +#endif + +//--------------------------------------------------------------------+ +// Mode Switching +//--------------------------------------------------------------------+ + +void usb_mode_switch(void) { + printf("\r\n--- Switching USB mode ---\r\n"); + + // Deinitialize current mode + if (current_role == TUSB_ROLE_DEVICE) { + printf("Stopping DEVICE mode...\r\n"); + tusb_deinit(BOARD_RHPORT); + } else { + printf("Stopping HOST mode...\r\n"); + tusb_deinit(BOARD_RHPORT); + } + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + vTaskDelay(pdMS_TO_TICKS(100)); // Small delay for clean transition +#else + tusb_time_delay_ms_api(100); // Small delay for clean transition +#endif // Switch to the other mode + if (current_role == TUSB_ROLE_DEVICE) { + printf("Starting HOST mode...\r\n"); + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_RHPORT, &host_init); + current_role = TUSB_ROLE_HOST; + } else { + printf("Starting DEVICE mode...\r\n"); + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(BOARD_RHPORT, &dev_init); + current_role = TUSB_ROLE_DEVICE; + } + + blink_interval_ms = BLINK_NOT_MOUNTED; + printf("Mode switch complete!\r\n\r\n"); +} + +//--------------------------------------------------------------------+ +// Device Mode: CDC Task +//--------------------------------------------------------------------+ + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +void cdc_task(void *params) { + (void) params; + + // RTOS forever loop + while (1) { + // Only process CDC when in device mode + if (current_role == TUSB_ROLE_DEVICE) { + // Connected and there are data available + while (tud_cdc_available()) { + uint8_t buf[64]; + + // Read data + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + + // Echo back + tud_cdc_write(buf, count); + + // Add newline for carriage return + for (uint32_t i = 0; i < count; i++) { + if (buf[i] == '\r') { + tud_cdc_write_char('\n'); + break; + } + } + } + + tud_cdc_write_flush(); + } + + vTaskDelay(pdMS_TO_TICKS(10)); + } +} +#else +void cdc_task(void) { + // Connected and there are data available + if (tud_cdc_available()) { + uint8_t buf[64]; + + // Read data + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + + // Echo back + for (uint32_t i = 0; i < count; i++) { + tud_cdc_write_char(buf[i]); + + if (buf[i] == '\r') { + tud_cdc_write_char('\n'); + } + } + + tud_cdc_write_flush(); + } +} +#endif + +//--------------------------------------------------------------------+ +// Device Callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) { + printf("[DEVICE] Mounted\r\n"); + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) { + printf("[DEVICE] Unmounted\r\n"); + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +void tud_suspend_cb(bool remote_wakeup_en) { + (void) remote_wakeup_en; + printf("[DEVICE] Suspended\r\n"); + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) { + printf("[DEVICE] Resumed\r\n"); + blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; +} + +//--------------------------------------------------------------------+ +// Host Callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted (configured) +void tuh_mount_cb(uint8_t daddr) { + printf("[HOST] Device attached, address = %d\r\n", daddr); + blink_interval_ms = BLINK_MOUNTED; + print_device_info(daddr); +} + +// Invoked when device is unmounted (unplugged) +void tuh_umount_cb(uint8_t daddr) { + printf("[HOST] Device removed, address = %d\r\n", daddr); + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +//--------------------------------------------------------------------+ +// Host Device Info +//--------------------------------------------------------------------+ + +static void print_device_info(uint8_t daddr) { + // Get Device Descriptor + uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc.device, 18); + if (XFER_RESULT_SUCCESS != xfer_result) { + printf("Failed to get device descriptor\r\n"); + return; + } + + printf("Device %u: ID %04x:%04x SN ", daddr, desc.device.idVendor, desc.device.idProduct); + + xfer_result = XFER_RESULT_FAILED; + if (desc.device.iSerialNumber != 0) { + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, desc.serial, sizeof(desc.serial)); + } + if (XFER_RESULT_SUCCESS != xfer_result) { + uint16_t* serial = (uint16_t*)(uintptr_t) desc.serial; + serial[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * 3 + 2)); + serial[1] = 'n'; + serial[2] = '/'; + serial[3] = 'a'; + serial[4] = 0; + } + print_utf16((uint16_t*)(uintptr_t) desc.serial, sizeof(desc.serial)/2); + printf("\r\n"); + + printf("Device Descriptor:\r\n"); + printf(" bLength %u\r\n", desc.device.bLength); + printf(" bDescriptorType %u\r\n", desc.device.bDescriptorType); + printf(" bcdUSB %04x\r\n", desc.device.bcdUSB); + printf(" bDeviceClass %u\r\n", desc.device.bDeviceClass); + printf(" bDeviceSubClass %u\r\n", desc.device.bDeviceSubClass); + printf(" bDeviceProtocol %u\r\n", desc.device.bDeviceProtocol); + printf(" bMaxPacketSize0 %u\r\n", desc.device.bMaxPacketSize0); + printf(" idVendor 0x%04x\r\n", desc.device.idVendor); + printf(" idProduct 0x%04x\r\n", desc.device.idProduct); + printf(" bcdDevice %04x\r\n", desc.device.bcdDevice); + + // Get Manufacturer string + if (desc.device.iManufacturer) { + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf))) { + printf(" iManufacturer %u ", desc.device.iManufacturer); + print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + printf("\r\n"); + } + } + + // Get Product string + if (desc.device.iProduct) { + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf))) { + printf(" iProduct %u ", desc.device.iProduct); + print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + printf("\r\n"); + } + } + + // Get Serial string + if (desc.device.iSerialNumber) { + printf(" iSerialNumber %u ", desc.device.iSerialNumber); + print_utf16((uint16_t*)(uintptr_t) desc.serial, sizeof(desc.serial)/2); + printf("\r\n"); + } else { + printf(" iSerialNumber 0\r\n"); + } + + printf(" bNumConfigurations %u\r\n", desc.device.bNumConfigurations); + printf("\r\n"); +} + +static void print_utf16(uint16_t* temp_buf, size_t buf_len) { + if (temp_buf[0] == 0 || (temp_buf[0] >> 8) != TUSB_DESC_STRING) { + printf("(invalid)"); + return; + } + + size_t chr_count = (temp_buf[0] & 0xff) / 2 - 1; + if (chr_count > buf_len - 1) { + chr_count = buf_len - 1; + } + + for (size_t i = 0; i < chr_count; i++) { + uint16_t ch = temp_buf[1 + i]; + if (ch <= 0x7F) { + putchar((char) ch); + } else { + // TODO support UTF16 to UTF8 conversion + putchar('?'); + } + } +} + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +void led_blinking_task(void *param) { + (void) param; + static bool led_state = false; + + // RTOS forever loop + while (1) { + board_led_write(led_state); + led_state = 1 - led_state; // toggle + vTaskDelay(pdMS_TO_TICKS(blink_interval_ms)); + } +} +#else +void led_blinking_task(void) { + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} +#endif diff --git a/examples/dual/dynamic_switch/src/tusb_config.h b/examples/dual/dynamic_switch/src/tusb_config.h new file mode 100644 index 000000000..af0d55f14 --- /dev/null +++ b/examples/dual/dynamic_switch/src/tusb_config.h @@ -0,0 +1,158 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used can be defined by board.mk, default to port 0 +#ifndef BOARD_RHPORT + #if defined(BOARD_TUD_RHPORT) + #define BOARD_RHPORT BOARD_TUD_RHPORT + #else + #define BOARD_RHPORT 0 + #define BOARD_TUD_RHPORT 0 + #endif +#endif + +#if defined(BOARD_TUH_RHPORT) + #if BOARD_TUH_RHPORT != BOARD_RHPORT + #undef BOARD_TUH_RHPORT + #define BOARD_TUH_RHPORT BOARD_RHPORT + #endif +#else + #define BOARD_TUH_RHPORT BOARD_RHPORT +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_MAX_SPEED + #if defined(BOARD_TUD_MAX_SPEED) + #define BOARD_MAX_SPEED BOARD_TUD_MAX_SPEED + #else + #define BOARD_MAX_SPEED OPT_MODE_DEFAULT_SPEED + #endif +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device and Host stacks (dual role) +#define CFG_TUD_ENABLED 1 +#define CFG_TUH_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_MAX_SPEED +#define CFG_TUH_MAX_SPEED BOARD_MAX_SPEED + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUD_MEM_SECTION +#define CFG_TUD_MEM_SECTION +#endif + +#ifndef CFG_TUD_MEM_ALIGN +#define CFG_TUD_MEM_ALIGN __attribute__((aligned(4))) +#endif + +#ifndef CFG_TUH_MEM_SECTION +#define CFG_TUH_MEM_SECTION CFG_TUD_MEM_SECTION +#endif + +#ifndef CFG_TUH_MEM_ALIGN +#define CFG_TUH_MEM_ALIGN CFG_TUD_MEM_ALIGN +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 1 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// CDC Endpoint transfer buffer size, more is faster +#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +//-------------------------------------------------------------------- +// HOST CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 1 +// max device support (excluding hub device) +#define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) // hub typically has 4 ports + +#define CFG_TUH_CDC 0 +#define CFG_TUH_HID 0 +#define CFG_TUH_MSC 0 +#define CFG_TUH_VENDOR 0 + +// max endpoint pair supported by each device +#define CFG_TUH_ENDPOINT_MAX 16 + +#ifdef __cplusplus +} +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/examples/dual/dynamic_switch/src/usb_descriptors.c b/examples/dual/dynamic_switch/src/usb_descriptors.c new file mode 100644 index 000000000..54ffc2c18 --- /dev/null +++ b/examples/dual/dynamic_switch/src/usb_descriptors.c @@ -0,0 +1,199 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board_api.h" +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] + */ +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4)) + +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +static tusb_desc_device_t const desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = USB_BCD, + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = USB_VID, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const *tud_descriptor_device_cb(void) { + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum { + ITF_NUM_CDC = 0, + ITF_NUM_CDC_DATA, + ITF_NUM_TOTAL +}; + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + +#elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) + // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + +#else + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + +#endif + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN) + +static uint8_t const desc_fs_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +static uint8_t const desc_hs_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), +}; +#endif + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const *tud_descriptor_configuration_cb(uint8_t index) { + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// String Descriptor Index +enum { + STRID_LANGID = 0, + STRID_MANUFACTURER, + STRID_PRODUCT, + STRID_SERIAL, +}; + +// array of pointer to string descriptors +static char const *string_desc_arr[] = { + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + NULL, // 3: Serials, will use unique ID if possible + "TinyUSB CDC", // 4: CDC Interface +}; + +static uint16_t _desc_str[32 + 1]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + (void) langid; + size_t chr_count; + + switch (index) { + case STRID_LANGID: + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + break; + + case STRID_SERIAL: + chr_count = board_usb_get_serial(_desc_str + 1, 32); + break; + + default: + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { return NULL; } + + const char *str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if (chr_count > max_count) { chr_count = max_count; } + + // Convert ASCII string into UTF-16 + for (size_t i = 0; i < chr_count; i++) { + _desc_str[1 + i] = str[i]; + } + break; + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); + return _desc_str; +} diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c index 8ea8ec5a5..9c78cf7dd 100644 --- a/hw/bsp/stm32f2/family.c +++ b/hw/bsp/stm32f2/family.c @@ -36,7 +36,7 @@ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ void OTG_FS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h index 4fb72cce8..58adf2664 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h @@ -62,7 +62,7 @@ static board_pindef_t board_pindef[] = { { // Button .port = GPIOC, .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, - .active_state = 1 + .active_state = 0 }, { // UART TX .port = GPIOD, -- cgit v1.3.1 From a3fd3071c17bdc7392db1361f3a97019351af337 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 15 Dec 2025 23:01:36 +0100 Subject: Fix IAR warnings Signed-off-by: HiFiPhile --- src/common/tusb_fifo.h | 10 ++++++++++ src/tusb.c | 6 ++++++ 2 files changed, 16 insertions(+) diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 86ba59059..a3829e38e 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -289,6 +289,12 @@ TU_ATTR_ALWAYS_INLINE static inline bool tu_fifo_empty(const tu_fifo_t *f) { return wr_idx == rd_idx; } +// Suppress IAR warning +// Warning[Pa082]: undefined behavior: the order of volatile accesses is undefined in this statement +#if defined(__ICCARM__) +#pragma diag_suppress = Pa082 +#endif + // return number of items in fifo, capped to fifo's depth TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_count(const tu_fifo_t *f) { return tu_min16(tu_ff_overflow_count(f->depth, f->wr_idx, f->rd_idx), f->depth); @@ -303,6 +309,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_remaining(const tu_fifo_t * return tu_ff_remaining_local(f->depth, f->wr_idx, f->rd_idx); } +#if defined(__ICCARM__) + #pragma diag_default=Pa082 +#endif + #ifdef __cplusplus } #endif diff --git a/src/tusb.c b/src/tusb.c index ed254a10b..803803ca2 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -39,6 +39,12 @@ #include "host/usbh_pvt.h" #endif +// Suppress IAR warning +// Warning[Pe111]: statement is unreachable +#if defined(__ICCARM__) +#pragma diag_suppress = Pe111 +#endif + tusb_role_t _tusb_rhport_role[TUP_USBIP_CONTROLLER_NUM] = { TUSB_ROLE_INVALID }; //-------------------------------------------------------------------- -- cgit v1.3.1 From 22acfb62672b4eae27f8d6db49ac205a38c18f9e Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 27 Feb 2026 11:53:02 +0100 Subject: cleanup Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 1bdab6a45..420b3fe4b 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -416,11 +416,6 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // force host mode and wait for mode switch dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_FDMOD) | GUSBCFG_FHMOD; - #if CFG_TUSB_MCU == OPT_MCU_STM32N6 - // No hardware detection of Vbus B-session is available on the STM32N6 - dwc2->stm32_gccfg &= ~STM32_GCCFG_VBVALOVAL; - #endif - while ((dwc2->gintsts & GINTSTS_CMOD) != GINTSTS_CMODE_HOST) {} #ifdef TUP_USBIP_DWC2_STM32 -- cgit v1.3.1 From 66c4d470eb70b781f0ebdd995aadf44633ce95a4 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 27 Feb 2026 22:39:42 +0700 Subject: add back deferred attachment queue, retry get hub port status if reset change not set after 20ms --- src/host/hcd.h | 3 +- src/host/usbh.c | 117 ++++++++++++++++++++++++++++++++++++--------------- src/osal/osal_none.h | 4 +- 3 files changed, 86 insertions(+), 38 deletions(-) diff --git a/src/host/hcd.h b/src/host/hcd.h index 36a7f5da5..47d672f9e 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -59,7 +59,7 @@ typedef enum { HCD_EVENT_XFER_COMPLETE, USBH_EVENT_FUNC_CALL, // Not an HCD event - HCD_EVENT_COUNT + HCD_EVENT_INVALID } hcd_eventid_t; typedef struct { @@ -72,7 +72,6 @@ typedef struct { struct { uint8_t hub_addr; uint8_t hub_port; - uint8_t speed; } connection; // XFER_COMPLETE diff --git a/src/host/usbh.c b/src/host/usbh.c index 76269eb2f..60d78605f 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -169,6 +169,12 @@ static OSAL_SPINLOCK_DEF(_usbh_spin, usbh_int_set); OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); static osal_queue_t _usbh_q; + #if CFG_TUH_HUB +// Deferred attachment queue, only needed when using hub +OSAL_QUEUE_DEF(usbh_int_set, _usbh_daqdef, CFG_TUH_HUB, hcd_event_t); +static osal_queue_t _usbh_daq; + #endif + // Control transfers: since most controllers do not support multiple control transfers // on multiple devices concurrently and control transfers are not used much except for // enumeration, we will only execute control transfers one at a time. @@ -387,9 +393,6 @@ TU_ATTR_ALWAYS_INLINE static inline void usbh_device_close(uint8_t rhport, uint8 // invalidate if enumerating if (daddr == _usbh_data.enumerating_daddr) { _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; - #if CFG_TUSB_OS_HAS_SCHEDULER == 0 - _usbh_data.call_after.func = NULL; - #endif } } @@ -523,11 +526,17 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { _usbh_q = osal_queue_create(&_usbh_qdef); TU_ASSERT(_usbh_q != NULL); -#if OSAL_MUTEX_REQUIRED + #if CFG_TUH_HUB + // Deferred attachment queue + _usbh_daq = osal_queue_create(&_usbh_daqdef); + TU_ASSERT(_usbh_daq != NULL); + #endif + + #if OSAL_MUTEX_REQUIRED // Init mutex _usbh_mutex = osal_mutex_create(&_usbh_mutexdef); TU_ASSERT(_usbh_mutex); -#endif + #endif // Get application driver if available _app_driver = usbh_app_driver_get_cb(&_app_driver_count); @@ -588,11 +597,16 @@ bool tuh_deinit(uint8_t rhport) { osal_queue_delete(_usbh_q); _usbh_q = NULL; -#if OSAL_MUTEX_REQUIRED + #if CFG_TUH_HUB + osal_queue_delete(_usbh_daq); + _usbh_daq = NULL; + #endif + + #if OSAL_MUTEX_REQUIRED // TODO make sure there is no task waiting on this mutex osal_mutex_delete(_usbh_mutex); _usbh_mutex = NULL; -#endif + #endif } return true; @@ -600,9 +614,19 @@ bool tuh_deinit(uint8_t rhport) { bool tuh_task_event_ready(void) { if (!tuh_inited()) { - return false; // Skip if stack is not initialized + return false; // Skip if tusb stack is not initialized + } + if (!osal_queue_empty(_usbh_q)) { + return true; } - return !osal_queue_empty(_usbh_q); + + #if CFG_TUH_HUB + if (!osal_queue_empty(_usbh_daq)) { + return true; + } + #endif + + return false; } /* USB Host Driver task @@ -652,12 +676,27 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { #endif hcd_event_t event; - if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) { return; } + + #if CFG_TUH_HUB + // Get deferred device attachments if none is enumerating + bool has_deferred_attach = false; + if (_usbh_data.enumerating_daddr == TUSB_INDEX_INVALID_8) { + // zero wait to avoid blocking the main event queue + has_deferred_attach = osal_queue_receive(_usbh_daq, &event, 0); + } + + if (!has_deferred_attach) // skip event queue to process deferred at + #endif + { + if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) { + return; + } + } switch (event.event_id) { case HCD_EVENT_DEVICE_ATTACH: // Should we miss the hub detach event due to high traffic, Or due to physical debouncing, some devices can - // cause multiple attaches (actually reset) without detach event. + // cause multiple attaches (actually reset) without a detached event. // Force remove currently mounted with the same bus info (rhport, hub addr, hub port) if exists process_remove_event(&event); @@ -667,15 +706,13 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { TU_LOG_USBH("[%u:] USBH Device Attach\r\n", event.rhport); _usbh_data.enumerating_daddr = 0; // enumerate new device with address 0 enum_new_device(&event); - } else { - // currently enumerating another device + } + #if CFG_TUH_HUB + else { TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); - const bool is_empty = osal_queue_empty(_usbh_q); - queue_event(&event, in_isr); - if (is_empty) { - return; // Exit if this is the only event in the queue, otherwise we loop forever - } + TU_ASSERT(osal_queue_send(_usbh_daq, &event, in_isr), ); } + #endif break; case HCD_EVENT_DEVICE_REMOVE: @@ -753,8 +790,12 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { } #if CFG_TUSB_OS_HAS_SCHEDULER - // return if there are no more events, for application to run other backgrounds - if (osal_queue_empty(_usbh_q)) { + // return if there are no more events, to allow application to run other backgrounds + if (osal_queue_empty(_usbh_q) + #if CFG_TUH_HUB + && osal_queue_empty(_usbh_daq) + #endif + ) { return; } #endif @@ -1468,6 +1509,7 @@ enum { ENUM_HUB_RERSET, ENUM_HUB_RESET_COMPLETE, ENUM_HUB_CLEAR_RESET, + ENUM_HUB_CLEAR_RESET_RETRY, // 2nd attempt waiting for hub reset ENUM_HUB_CLEAR_RESET_COMPLETE, ENUM_ADDR0_DEVICE_DESC, ENUM_SET_ADDR, @@ -1496,6 +1538,7 @@ enum { ENUM_AFTER_RESET_ROOT_DELAY, ENUM_AFTER_RESET_ROOT_POST_DELAY, ENUM_AFTER_RESET_HUB_DELAY, + ENUM_AFTER_RESET_HUB_DELAY_RETRY, ENUM_AFTER_RESET_RECOVERY_DELAY, ENUM_AFTER_SET_ADDRESS_RECOVERY_DELAY, }; @@ -1561,9 +1604,11 @@ static void enum_async_delay(uintptr_t state) { #if CFG_TUH_HUB case ENUM_AFTER_RESET_HUB_DELAY: + case ENUM_AFTER_RESET_HUB_DELAY_RETRY: // get status after reset complete to check for reset change TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, - ENUM_HUB_CLEAR_RESET), ); + state == ENUM_AFTER_RESET_HUB_DELAY ? ENUM_HUB_CLEAR_RESET + : ENUM_HUB_CLEAR_RESET_RETRY), ); break; #endif @@ -1646,18 +1691,22 @@ static void process_enumeration(tuh_xfer_t *xfer) { usbh_call_after_ms(ENUM_RESET_HUB_DELAY_MS, enum_async_delay, ENUM_AFTER_RESET_HUB_DELAY); break; - case ENUM_HUB_CLEAR_RESET: { + case ENUM_HUB_CLEAR_RESET: + case ENUM_HUB_CLEAR_RESET_RETRY: { hub_port_status_response_t port_status; hub_port_get_status_local(dev0_bus->hub_addr, dev0_bus->hub_port, &port_status); if (1 == port_status.change.reset) { // Acknowledge Port Reset Change - TU_ASSERT(hub_port_clear_reset_change(dev0_bus->hub_addr, dev0_bus->hub_port, process_enumeration, ENUM_HUB_CLEAR_RESET_COMPLETE),); + TU_ASSERT(hub_port_clear_reset_change(dev0_bus->hub_addr, dev0_bus->hub_port, process_enumeration, + ENUM_HUB_CLEAR_RESET_COMPLETE), ); + } else if (state == ENUM_HUB_CLEAR_RESET) { + // retry one more time if reset change not set yet + usbh_call_after_ms(ENUM_RESET_HUB_DELAY_MS, enum_async_delay, ENUM_AFTER_RESET_HUB_DELAY_RETRY); } else { - // maybe retry if reset change not set but we need timeout to prevent infinite loop - // TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, ENUM_HUB_CLEAR_RESET_COMPLETE),); + // retry but still not set --> failed + enum_full_complete(false); } - break; } @@ -1855,11 +1904,12 @@ static void process_enumeration(tuh_xfer_t *xfer) { TU_LOG_USBH("Device configured\r\n"); dev->configured = 1; - #if CFG_TUH_HUB + #if CFG_TUH_HUB + // get next hub status now since device can be unplugged before set_configure() is complete if (_usbh_data.dev0_bus.hub_addr != 0) { - hub_edpt_status_xfer(_usbh_data.dev0_bus.hub_addr); // get next hub status + hub_edpt_status_xfer(_usbh_data.dev0_bus.hub_addr); } - #endif + #endif // Parse configuration & set up drivers // driver_open() must not make any usb transfer @@ -1981,7 +2031,7 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { } } - // all interface are configured + // all interfaces are configured if (itf_num == CFG_TUH_INTERFACE_MAX) { enum_full_complete(true); @@ -2004,11 +2054,10 @@ static void enum_full_complete(bool success) { #if CFG_TUH_HUB // Hub status is already requested in case of successful enumeration - if (_usbh_data.dev0_bus.hub_addr != 0 && !success) { - hub_edpt_status_xfer(_usbh_data.dev0_bus.hub_addr); // get next hub status + if (!success && _usbh_data.dev0_bus.hub_addr != 0) { + hub_edpt_status_xfer(_usbh_data.dev0_bus.hub_addr); } -#endif - + #endif } #endif diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 6ab18ace8..bba42716d 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -184,7 +184,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, v (void) msec; // not used, always behave as msec = 0 qhdl->interrupt_set(false); - const bool success = tu_fifo_read_n(&qhdl->ff, data, qhdl->item_size); + const bool success = (tu_fifo_read_n(&qhdl->ff, data, qhdl->item_size) > 0); qhdl->interrupt_set(true); return success; @@ -195,7 +195,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void qhdl->interrupt_set(false); } - const bool success = tu_fifo_write_n(&qhdl->ff, data, qhdl->item_size); + const bool success = (tu_fifo_write_n(&qhdl->ff, data, qhdl->item_size) > 0); if (!in_isr) { qhdl->interrupt_set(true); -- cgit v1.3.1 From 8302adfab8727896c4a10935a15c32fbdcba3b8e Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 27 Feb 2026 22:40:16 +0700 Subject: update h743eval board settings for tracing --- hw/bsp/stm32h7/boards/stm32h743eval/board.h | 10 +++++----- .../stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc | 14 +++++++------- hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug | 10 +++++----- 3 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 44ca58dc5..0f0eb4ed3 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -120,13 +120,13 @@ static inline void SystemClock_Config(void) { // From H743 eval manual ETM can only work at 50 MHz clock by default because ETM signals // are shared with other peripherals. Trace CLK = PLL1R. RCC_OscInitStruct.PLL.PLLM = 5; - RCC_OscInitStruct.PLL.PLLN = 160; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLQ = 4; - RCC_OscInitStruct.PLL.PLLR = 6; // Trace clock is 400/6 = 66.67 MHz (larger than 50 MHz but work well) + RCC_OscInitStruct.PLL.PLLN = 160; // May reduce to 200 Mhz when tracing to avoid overflowing trace buffer + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 4; + RCC_OscInitStruct.PLL.PLLR = 16; // Trace clock is limit to 50 Mhz to meet board requirement + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; RCC_OscInitStruct.PLL.PLLFRACN = 0; - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; HAL_RCC_OscConfig(&RCC_OscInitStruct); diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc b/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc index 0e5a4cc00..a2e11012f 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc +++ b/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc @@ -193,8 +193,8 @@ Mcu.PinsNb=169 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32H743XIHx -MxCube.Version=6.10.0 -MxDb.Version=DB.6.0.100 +MxCube.Version=6.12.1 +MxDb.Version=DB.6.0.121 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false NVIC.ForceEnableDMAVector=true @@ -880,12 +880,12 @@ ProjectManager.CustomerFirmwarePackage= ProjectManager.DefaultFWLocation=true ProjectManager.DeletePrevious=true ProjectManager.DeviceId=STM32H743XIHx -ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.0 +ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.2 ProjectManager.FreePins=false ProjectManager.HalAssertFull=false ProjectManager.HeapSize=0x200 ProjectManager.KeepUserCode=true -ProjectManager.LastFirmware=false +ProjectManager.LastFirmware=true ProjectManager.LibraryCopy=2 ProjectManager.MainLocation=Src ProjectManager.NoMain=false @@ -933,8 +933,8 @@ RCC.DIVQ1Freq_Value=200000000 RCC.DIVQ2Freq_Value=50390625 RCC.DIVQ3=7 RCC.DIVQ3Freq_Value=48000000 -RCC.DIVR1=6 -RCC.DIVR1Freq_Value=133333333.33333333 +RCC.DIVR1=8 +RCC.DIVR1Freq_Value=100000000 RCC.DIVR2Freq_Value=50390625 RCC.DIVR3Freq_Value=168000000 RCC.EnbaleCSS=true @@ -979,7 +979,7 @@ RCC.SYSCLKFreq_VALUE=400000000 RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK RCC.Tim1OutputFreq_Value=200000000 RCC.Tim2OutputFreq_Value=200000000 -RCC.TraceFreq_Value=133333333.33333333 +RCC.TraceFreq_Value=100000000 RCC.USART16Freq_Value=100000000 RCC.USART234578Freq_Value=100000000 RCC.USBCLockSelection=RCC_USBCLKSOURCE_PLL3 diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug b/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug index 0ab078319..32a8155c1 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug +++ b/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug @@ -9,6 +9,10 @@ ********************************************************************** */ void OnProjectLoad (void) { + Project.SetTraceSource ("Trace Pins"); + Project.SetTraceTiming (100, 100, 100, 100); + Project.SetSWO (0); + Edit.SysVar (VAR_TRACE_CORE_CLOCK, 200000000); Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M7F.svd"); Project.AddSvdFile ("$(InstallDir)/Config/Peripherals/ARMv7M.svd"); Project.AddSvdFile ("./STM32H743.svd"); @@ -18,12 +22,8 @@ void OnProjectLoad (void) { Project.SetTargetIF ("SWD"); Project.SetTIFSpeed ("50 MHz"); - Project.SetTraceSource ("Trace Pins"); - Project.SetTracePortWidth (4); - // timing delay for trace pins in pico seconds, default is 2 nano seconds - Project.SetTraceTiming (100, 100, 100, 100); - File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-stm32h743eval/cdc_msc.elf"); + // File.Open ("../../../../../../examples/cmake-build-stm32h743eval_host1/host/cdc_msc_hid/cdc_msc_hid.elf"); } /********************************************************************* -- cgit v1.3.1 From 7ea02fd6c9e376679bc1fe025bb73e43664e17c6 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 27 Feb 2026 23:34:48 +0700 Subject: add osal_time_millis() to osal requirement implement tusb_time_millis_api() with osal_time_millis() when OS is not NONE --- src/common/tusb_common.h | 6 ------ src/osal/osal.h | 2 ++ src/osal/osal_freertos.h | 4 ++++ src/osal/osal_mynewt.h | 4 ++++ src/osal/osal_none.h | 2 ++ src/osal/osal_pico.h | 4 ++++ src/osal/osal_rtthread.h | 4 ++++ src/osal/osal_rtx4.h | 4 ++++ src/osal/osal_zephyr.h | 4 ++++ src/tusb.c | 10 ++++++++-- src/tusb.h | 12 +++++++++++- 11 files changed, 47 insertions(+), 9 deletions(-) diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 6ac1405f3..9eb0a9337 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -90,12 +90,6 @@ // TODO move to a more obvious place/file //--------------------------------------------------------------------+ -// Get current milliseconds, required by some port/configuration without RTOS -extern uint32_t tusb_time_millis_api(void); - -// Delay in milliseconds, use tusb_time_millis_api() by default. required by some port/configuration with no RTOS -extern void tusb_time_delay_ms_api(uint32_t ms); - // flush data cache extern void tusb_app_dcache_flush(uintptr_t addr, uint32_t data_size); diff --git a/src/osal/osal.h b/src/osal/osal.h index 44521620f..c0292a008 100644 --- a/src/osal/osal.h +++ b/src/osal/osal.h @@ -74,6 +74,8 @@ typedef void (*osal_task_func_t)(void* param); /*-------------------------------------------------------------------- OSAL Porting API Should be implemented as static inline function in osal_port.h header + uint32_t osal_time_millis(void); + void osal_spin_init(osal_spinlock_t *ctx); void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr); diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 9aeda4d01..32ee2d55c 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -99,6 +99,10 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { vTaskDelay(pdMS_TO_TICKS(msec)); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t osal_time_millis(void) { + return pdTICKS_TO_MS(xTaskGetTickCount()); +} + //--------------------------------------------------------------------+ // Spinlock API //--------------------------------------------------------------------+ diff --git a/src/osal/osal_mynewt.h b/src/osal/osal_mynewt.h index 6d51f8ec3..94124ca81 100644 --- a/src/osal/osal_mynewt.h +++ b/src/osal/osal_mynewt.h @@ -40,6 +40,10 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { os_time_delay( os_time_ms_to_ticks32(msec) ); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t osal_time_millis(void) { + return os_time_ticks_to_ms32(os_time_get()); +} + //--------------------------------------------------------------------+ // Spinlock API //--------------------------------------------------------------------+ diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index bba42716d..7bf6029d6 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -31,6 +31,8 @@ extern "C" { #endif +// osal_time_millis() is not provided, tusb_time_millis_api() must be implemented by user application + //--------------------------------------------------------------------+ // Spinlock API //--------------------------------------------------------------------+ diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index 79b728e9a..6a0a21bb3 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -43,6 +43,10 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { sleep_ms(msec); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t osal_time_millis(void) { + return to_ms_since_boot(get_absolute_time()); +} + //--------------------------------------------------------------------+ // Spinlock API //--------------------------------------------------------------------+ diff --git a/src/osal/osal_rtthread.h b/src/osal/osal_rtthread.h index a778f5425..f560281c5 100644 --- a/src/osal/osal_rtthread.h +++ b/src/osal/osal_rtthread.h @@ -42,6 +42,10 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { rt_thread_mdelay(msec); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t osal_time_millis(void) { + return (uint32_t)((((uint64_t)rt_tick_get()) * 1000) / RT_TICK_PER_SECOND); +} + //--------------------------------------------------------------------+ // Spinlock API //--------------------------------------------------------------------+ diff --git a/src/osal/osal_rtx4.h b/src/osal/osal_rtx4.h index 35860ddd5..e1930c96c 100644 --- a/src/osal/osal_rtx4.h +++ b/src/osal/osal_rtx4.h @@ -46,6 +46,10 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { os_dly_wait(lo); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t osal_time_millis(void) { + return os_time_get(); +} + TU_ATTR_ALWAYS_INLINE static inline uint16_t msec2wait(uint32_t msec) { if (msec == OSAL_TIMEOUT_WAIT_FOREVER) { return 0xFFFF; diff --git a/src/osal/osal_zephyr.h b/src/osal/osal_zephyr.h index 91f225f79..900ac786c 100644 --- a/src/osal/osal_zephyr.h +++ b/src/osal/osal_zephyr.h @@ -35,6 +35,10 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { k_msleep(msec); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t osal_time_millis(void) { + return k_uptime_get_32(); +} + //--------------------------------------------------------------------+ // Spinlock API //--------------------------------------------------------------------+ diff --git a/src/tusb.c b/src/tusb.c index 6075e9db4..40d0e8adf 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -45,17 +45,23 @@ tusb_role_t _tusb_rhport_role[TUP_USBIP_CONTROLLER_NUM] = { TUSB_ROLE_INVALID }; // Weak/Default API, can be overwritten by Application //-------------------------------------------------------------------- + #if CFG_TUSB_OS != OPT_OS_NONE +uint32_t tusb_time_millis_api(void) { + return osal_time_millis(); +} + #endif + TU_ATTR_WEAK void tusb_time_delay_ms_api(uint32_t ms) { #if CFG_TUSB_OS != OPT_OS_NONE osal_task_delay(ms); #else - // delay using millis() (if implemented) and/or frame number if possible + // delay using millis() const uint32_t time_ms = tusb_time_millis_api(); while ((tusb_time_millis_api() - time_ms) < ms) {} #endif } -TU_ATTR_WEAK void* tusb_app_virt_to_phys(void *virt_addr) { +TU_ATTR_WEAK void *tusb_app_virt_to_phys(void *virt_addr) { return virt_addr; } diff --git a/src/tusb.h b/src/tusb.h index 62b3b9783..742009a2e 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -135,7 +135,7 @@ //--------------------------------------------------------------------+ -// User API +// Application API //--------------------------------------------------------------------+ #if CFG_TUH_ENABLED || CFG_TUD_ENABLED @@ -174,6 +174,16 @@ bool tusb_deinit(uint8_t rhport); #endif +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +// Get current milliseconds, required by some port/configuration without RTOS +extern uint32_t tusb_time_millis_api(void); + +// Delay in milliseconds, use tusb_time_millis_api() by default. required by some port/configuration with no RTOS +extern void tusb_time_delay_ms_api(uint32_t ms); + #ifdef __cplusplus } #endif -- cgit v1.3.1 From 8444c25ab6bc841bad81fd04afc1e66a9d57a115 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 27 Feb 2026 23:51:36 +0700 Subject: replace board_millis() with tusb_time_millis_api() --- examples/device/audio_4_channel_mic/src/main.c | 4 +-- examples/device/audio_test/src/main.c | 4 +-- examples/device/audio_test_multi_rate/src/main.c | 4 +-- examples/device/board_test/src/main.c | 4 +-- examples/device/cdc_dual_ports/src/main.c | 2 +- examples/device/cdc_msc/src/main.c | 2 +- examples/device/cdc_uac2/src/uac2_app.c | 4 +-- examples/device/dfu/src/main.c | 2 +- examples/device/dfu_runtime/src/main.c | 2 +- examples/device/dynamic_configuration/src/main.c | 4 +-- examples/device/hid_boot_interface/src/main.c | 4 +-- examples/device/hid_composite/src/main.c | 4 +-- examples/device/hid_generic_inout/src/main.c | 2 +- examples/device/hid_multiple_interface/src/main.c | 4 +-- examples/device/midi_test/src/main.c | 4 +-- examples/device/msc_dual_lun/src/main.c | 2 +- examples/device/mtp/src/main.c | 2 +- examples/device/net_lwip_webserver/src/main.c | 2 +- examples/device/uac2_headset/src/main.c | 6 ++-- examples/device/uac2_speaker_fb/src/main.c | 6 ++-- examples/device/usbtmc/src/main.c | 6 ++-- examples/device/usbtmc/src/usbtmc_app.c | 8 ++--- examples/device/video_capture/src/main.c | 6 ++-- examples/device/video_capture_2ch/src/main.c | 6 ++-- examples/device/webusb_serial/src/main.c | 2 +- examples/dual/host_hid_to_device_cdc/src/main.c | 2 +- examples/dual/host_info_to_device_cdc/src/main.c | 6 ++-- examples/host/bare_api/src/main.c | 2 +- examples/host/cdc_msc_hid/src/main.c | 2 +- examples/host/device_info/src/main.c | 2 +- examples/host/hid_controller/src/hid_app.c | 2 +- examples/host/hid_controller/src/main.c | 2 +- examples/host/midi_rx/src/main.c | 2 +- examples/host/msc_file_explorer/src/main.c | 2 +- examples/typec/power_delivery/src/main.c | 2 +- hw/bsp/at32f402_405/family.c | 2 +- hw/bsp/at32f403a_407/family.c | 2 +- hw/bsp/at32f413/family.c | 2 +- hw/bsp/at32f415/family.c | 2 +- hw/bsp/at32f423/family.c | 2 +- hw/bsp/at32f425/family.c | 2 +- hw/bsp/at32f435_437/family.c | 2 +- hw/bsp/at32f45x/family.c | 2 +- hw/bsp/board.c | 4 --- hw/bsp/board_api.h | 41 ++--------------------- hw/bsp/broadcom_32bit/family.c | 2 +- hw/bsp/broadcom_64bit/family.c | 2 +- hw/bsp/brtmm90x/family.c | 2 +- hw/bsp/ch32f20x/family.c | 2 +- hw/bsp/ch32v10x/family.c | 2 +- hw/bsp/ch32v20x/family.c | 2 +- hw/bsp/ch32v30x/family.c | 2 +- hw/bsp/cxd56/family.c | 2 +- hw/bsp/da1469x/family.c | 2 +- hw/bsp/efm32/family.c | 2 +- hw/bsp/f1c100s/family.c | 2 +- hw/bsp/fomu/family.c | 2 +- hw/bsp/gd32vf103/family.c | 2 +- hw/bsp/hpmicro/family.c | 2 +- hw/bsp/imxrt/family.c | 2 +- hw/bsp/kinetis_k/family.c | 2 +- hw/bsp/kinetis_k32l2/family.c | 2 +- hw/bsp/kinetis_kl/family.c | 2 +- hw/bsp/lpc11/family.c | 2 +- hw/bsp/lpc13/family.c | 2 +- hw/bsp/lpc15/family.c | 2 +- hw/bsp/lpc17/family.c | 2 +- hw/bsp/lpc18/family.c | 2 +- hw/bsp/lpc40/family.c | 2 +- hw/bsp/lpc43/family.c | 2 +- hw/bsp/lpc51/family.c | 2 +- hw/bsp/lpc54/family.c | 2 +- hw/bsp/lpc55/family.c | 2 +- hw/bsp/maxim/family.c | 2 +- hw/bsp/mcx/family.c | 2 +- hw/bsp/mm32/family.c | 2 +- hw/bsp/msp430/family.c | 10 +++--- hw/bsp/msp432e4/family.c | 2 +- hw/bsp/nrf/family.c | 2 +- hw/bsp/nuc100_120/family.c | 2 +- hw/bsp/nuc121_125/family.c | 2 +- hw/bsp/nuc126/family.c | 2 +- hw/bsp/nuc505/family.c | 2 +- hw/bsp/pic32mz/family.c | 2 +- hw/bsp/ra/family.c | 2 +- hw/bsp/rw61x/family.c | 2 +- hw/bsp/rx/boards/gr_citrus/gr_citrus.c | 2 +- hw/bsp/rx/boards/rx65n_target/rx65n_target.c | 2 +- hw/bsp/samd11/family.c | 2 +- hw/bsp/samd2x_l2x/family.c | 2 +- hw/bsp/samd5x_e5x/family.c | 2 +- hw/bsp/same7x/family.c | 2 +- hw/bsp/samg/family.c | 2 +- hw/bsp/stm32c0/family.c | 2 +- hw/bsp/stm32f0/family.c | 2 +- hw/bsp/stm32f1/family.c | 2 +- hw/bsp/stm32f2/family.c | 2 +- hw/bsp/stm32f3/family.c | 2 +- hw/bsp/stm32f4/family.c | 2 +- hw/bsp/stm32f7/family.c | 2 +- hw/bsp/stm32g0/family.c | 2 +- hw/bsp/stm32g4/family.c | 2 +- hw/bsp/stm32h5/family.c | 2 +- hw/bsp/stm32h7/family.c | 2 +- hw/bsp/stm32h7rs/family.c | 2 +- hw/bsp/stm32l0/family.c | 2 +- hw/bsp/stm32l4/family.c | 2 +- hw/bsp/stm32n6/family.c | 2 +- hw/bsp/stm32u0/family.c | 2 +- hw/bsp/stm32u5/family.c | 2 +- hw/bsp/stm32wb/family.c | 2 +- hw/bsp/stm32wba/family.c | 2 +- hw/bsp/tm4c/family.c | 2 +- hw/bsp/xmc4000/family.c | 2 +- src/common/tusb_common.h | 6 ++++ src/host/usbh.c | 2 +- src/portable/sunxi/dcd_sunxi_musb.c | 3 -- src/tusb.c | 13 ++++--- src/tusb.h | 10 ------ 119 files changed, 158 insertions(+), 203 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 5767c7453..c9c6dd46c 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -155,7 +155,7 @@ void tud_resume_cb(void) { // In a real application, this would be replaced with actual I2S receive callback. void audio_task(void) { static uint32_t start_ms = 0; - uint32_t curr_ms = board_millis(); + uint32_t curr_ms = tusb_time_millis_api(); if (start_ms == curr_ms) { return; // not enough time } @@ -408,7 +408,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index 2441eefbc..876a41d06 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -138,7 +138,7 @@ void tud_resume_cb(void) { // In a real application, this would be replaced with actual I2S receive callback. void audio_task(void) { static uint32_t start_ms = 0; - uint32_t curr_ms = board_millis(); + uint32_t curr_ms = tusb_time_millis_api(); if (start_ms == curr_ms) { return; // not enough time } @@ -402,7 +402,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index baeec870f..952176997 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -146,7 +146,7 @@ void tud_resume_cb(void) { // In a real application, this would be replaced with actual I2S receive callback. void audio_task(void) { static uint32_t start_ms = 0; - uint32_t curr_ms = board_millis(); + uint32_t curr_ms = tusb_time_millis_api(); if (start_ms == curr_ms) { return; // not enough time } @@ -614,7 +614,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index ee0829e5b..757876ac8 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -58,8 +58,8 @@ int main(void) { } // Blink and print every interval ms - if (!(board_millis() - start_ms < interval_ms)) { - start_ms = board_millis(); + if (!(tusb_time_millis_api() - start_ms < interval_ms)) { + start_ms = tusb_time_millis_api(); if (ch < 0) { // skip if echoing diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 5ccb06a8a..6f918218d 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -157,7 +157,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 06a4f732f..b00a0e3a9 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -160,7 +160,7 @@ void led_blinking_task(void) { if (blink_enable) { // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index 73a262d0c..7760c402b 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -66,7 +66,7 @@ uint8_t current_resolution; // In a real application, this would be replaced with actual I2S send/receive callback. void audio_task(void) { static uint32_t start_ms = 0; - uint32_t curr_ms = board_millis(); + uint32_t curr_ms = tusb_time_millis_api(); if (start_ms == curr_ms) { return; // not enough time } @@ -303,7 +303,7 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; } start_ms += blink_interval_ms; diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index 77632bf1a..fb3c22630 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -199,7 +199,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 5de651bcd..6f412e8de 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -132,7 +132,7 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index dac74bb7a..8ebb42f9a 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -170,7 +170,7 @@ void midi_task(void) { while( tud_midi_available() ) tud_midi_packet_read(packet); // send note every 1000 ms - if (board_millis() - start_ms < 286) { + if (tusb_time_millis_api() - start_ms < 286) { return; // not enough time } start_ms += 286; @@ -209,7 +209,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return;// not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 44a91db67..4de319f52 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -109,7 +109,7 @@ void hid_task(void) { const uint32_t interval_ms = 10; static uint32_t start_ms = 0; - if (board_millis() - start_ms < interval_ms) { + if (tusb_time_millis_api() - start_ms < interval_ms) { return; // not enough time } start_ms += interval_ms; @@ -238,7 +238,7 @@ void led_blinking_task(void) { } // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 9693d564d..7c9d5af8d 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -209,7 +209,7 @@ void hid_task(void) { const uint32_t interval_ms = 10; static uint32_t start_ms = 0; - if (board_millis() - start_ms < interval_ms) { + if (tusb_time_millis_api() - start_ms < interval_ms) { return; // not enough time } start_ms += interval_ms; @@ -298,7 +298,7 @@ void led_blinking_task(void) { } // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 9837a47d9..2a6b91a8a 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -168,7 +168,7 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if ( tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index 0bccd13c1..c71a9cbad 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -120,7 +120,7 @@ void hid_task(void) const uint32_t interval_ms = 10; static uint32_t start_ms = 0; - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if ( tusb_time_millis_api() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; uint32_t const btn = board_button_read(); @@ -205,7 +205,7 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if ( tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index fd58e3021..1154c1d60 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -134,7 +134,7 @@ void midi_task(void) } // send note periodically - if (board_millis() - start_ms < 286) { + if (tusb_time_millis_api() - start_ms < 286) { return; // not enough time } start_ms += 286; @@ -174,7 +174,7 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if ( tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index 62b1c872a..b459871f7 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -103,7 +103,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/mtp/src/main.c b/examples/device/mtp/src/main.c index 57d1535b2..6ffa435d1 100644 --- a/examples/device/mtp/src/main.c +++ b/examples/device/mtp/src/main.c @@ -102,7 +102,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 867cf2812..9f26da2ba 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -291,5 +291,5 @@ void sys_arch_unprotect(sys_prot_t pval) { /* lwip needs a millisecond time source, and the TinyUSB board support code has one available */ uint32_t sys_now(void) { - return board_millis(); + return tusb_time_millis_api(); } diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 96fa66f1e..0ea63d8f7 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -559,7 +559,7 @@ bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_reques // In a real application, this would be replaced with actual I2S send/receive callback. void audio_task(void) { static uint32_t start_ms = 0; - uint32_t curr_ms = board_millis(); + uint32_t curr_ms = tusb_time_millis_api(); if (start_ms == curr_ms) return;// not enough time start_ms = curr_ms; // When new data arrived, copy data from speaker buffer, to microphone buffer @@ -605,7 +605,7 @@ void audio_control_task(void) { static uint32_t start_ms = 0; static uint32_t btn_prev = 0; - if (board_millis() - start_ms < interval_ms) return;// not enough time + if (tusb_time_millis_api() - start_ms < interval_ms) return;// not enough time start_ms += interval_ms; uint32_t btn = board_button_read(); @@ -644,7 +644,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; + if (tusb_time_millis_api() - start_ms < blink_interval_ms) return; start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 7b4e2d64c..8323d82e8 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -583,7 +583,7 @@ bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t fu // In a real application, this would be replaced with actual I2S transmit callback. void audio_task(void) { static uint32_t start_ms = 0; - uint32_t curr_ms = board_millis(); + uint32_t curr_ms = tusb_time_millis_api(); if (start_ms == curr_ms) return;// not enough time start_ms = curr_ms; @@ -610,7 +610,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; + if (tusb_time_millis_api() - start_ms < blink_interval_ms) return; start_ms += blink_interval_ms; board_led_write(led_state); @@ -624,7 +624,7 @@ void led_blinking_task(void) { // Every 1ms, we will sent 1 debug information report void audio_debug_task(void) { static uint32_t start_ms = 0; - uint32_t curr_ms = board_millis(); + uint32_t curr_ms = tusb_time_millis_api(); if (start_ms == curr_ms) return;// not enough time start_ms = curr_ms; diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 5cbbb85ef..b1269b117 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -124,12 +124,12 @@ void led_blinking_task(void) { led_state = true; board_led_write(true); - start_ms = board_millis(); + start_ms = tusb_time_millis_api(); doPulse = false; } else if (led_state == true) { - if ( board_millis() - start_ms < 750) //Spec says blink must be between 500 and 1000 ms. + if ( tusb_time_millis_api() - start_ms < 750) //Spec says blink must be between 500 and 1000 ms. { return; // not enough time } @@ -140,7 +140,7 @@ void led_blinking_task(void) else { // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if ( tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/usbtmc/src/usbtmc_app.c b/examples/device/usbtmc/src/usbtmc_app.c index 4c3724ac4..35e8618f5 100644 --- a/examples/device/usbtmc/src/usbtmc_app.c +++ b/examples/device/usbtmc/src/usbtmc_app.c @@ -209,19 +209,19 @@ void usbtmc_app_task_iter(void) { case 0: break; case 1: - queryDelayStart = board_millis(); + queryDelayStart = tusb_time_millis_api(); queryState = 2; break; case 2: - if( (board_millis() - queryDelayStart) > resp_delay) { - queryDelayStart = board_millis(); + if( (tusb_time_millis_api() - queryDelayStart) > resp_delay) { + queryDelayStart = tusb_time_millis_api(); queryState=3; status |= 0x10u; // MAV status |= 0x40u; // SRQ } break; case 3: - if( (board_millis() - queryDelayStart) > resp_delay) { + if( (tusb_time_millis_api() - queryDelayStart) > resp_delay) { queryState = 4; } break; diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index ffa2a7afa..df9f77a1c 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -231,7 +231,7 @@ static void video_send_frame(void) { if (!already_sent) { already_sent = 1; tx_busy = 1; - start_ms = board_millis(); + start_ms = tusb_time_millis_api(); #if defined(CFG_EXAMPLE_VIDEO_BUFFERLESS) tud_video_n_frame_xfer(0, 0, NULL, FRAME_WIDTH * FRAME_HEIGHT * 16 / 8); #elif defined (CFG_EXAMPLE_VIDEO_READONLY) @@ -247,7 +247,7 @@ static void video_send_frame(void) { #endif } - unsigned cur = board_millis(); + unsigned cur = tusb_time_millis_api(); if (cur - start_ms < interval_ms) { return; // not enough time } @@ -316,7 +316,7 @@ void led_blinking_task(void* param) { #if CFG_TUSB_OS == OPT_OS_FREERTOS vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); #else - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } #endif diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index 79b149f2b..debd336fd 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -221,13 +221,13 @@ static void video_send_frame(uint_fast8_t ctl_idx, uint_fast8_t stm_idx) { if (!(already_sent & (1u << idx))) { already_sent |= 1u << idx; tx_busy |= 1u << idx; - start_ms[idx] = board_millis(); + start_ms[idx] = tusb_time_millis_api(); fb_size = get_framebuf(ctl_idx, stm_idx, frame_num[idx], &fp); tud_video_n_frame_xfer(ctl_idx, stm_idx, fp, fb_size); } - unsigned cur = board_millis(); + unsigned cur = tusb_time_millis_api(); if (cur - start_ms[idx] < interval_ms[idx]) return; // not enough time if (tx_busy & (1u << idx)) return; start_ms[idx] += interval_ms[idx]; @@ -280,7 +280,7 @@ void led_blinking_task(void* param) { #if CFG_TUSB_OS == OPT_OS_FREERTOS vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); #else - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time #endif start_ms += blink_interval_ms; diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 155768b76..4be5e4db4 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -257,7 +257,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } start_ms += blink_interval_ms; diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index 8c53588c3..ba8ba019a 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -284,7 +284,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index fffb54d58..7cf43aef3 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -213,13 +213,13 @@ void cdc_task(void) { static uint32_t connected_ms = 0; if (!tud_cdc_connected()) { - connected_ms = board_millis(); + connected_ms = tusb_time_millis_api(); return; } // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop - if (board_millis() - connected_ms < 100) { + if (tusb_time_millis_api() - connected_ms < 100) { return; // wait for stable connection } @@ -309,7 +309,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return;// not enough time } start_ms += blink_interval_ms; diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index c693d6b00..ced2eaa32 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -335,7 +335,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < interval_ms) { + if (tusb_time_millis_api() - start_ms < interval_ms) { return; // not enough time } start_ms += interval_ms; diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index c309a7cae..c27ad93fe 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -92,7 +92,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < interval_ms) { + if (tusb_time_millis_api() - start_ms < interval_ms) { return;// not enough time } start_ms += interval_ms; diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index ab617e989..fd4e9c3ed 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -246,7 +246,7 @@ void led_blinking_task(void* param) { #if CFG_TUSB_OS == OPT_OS_FREERTOS vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); #else - if (board_millis() - start_ms < blink_interval_ms) { + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { return; // not enough time } #endif diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c index f8c3d029b..5417811f0 100644 --- a/examples/host/hid_controller/src/hid_app.c +++ b/examples/host/hid_controller/src/hid_app.c @@ -168,7 +168,7 @@ void hid_app_task(void) const uint32_t interval_ms = 200; static uint32_t start_ms = 0; - uint32_t current_time_ms = board_millis(); + uint32_t current_time_ms = tusb_time_millis_api(); if ( current_time_ms - start_ms >= interval_ms) { start_ms = current_time_ms; diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index fa70d7d1a..a9eebc90b 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -79,7 +79,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if ( tusb_time_millis_api() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/midi_rx/src/main.c b/examples/host/midi_rx/src/main.c index 78b1a11b9..f189e0864 100644 --- a/examples/host/midi_rx/src/main.c +++ b/examples/host/midi_rx/src/main.c @@ -72,7 +72,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < interval_ms) return;// not enough time + if (tusb_time_millis_api() - start_ms < interval_ms) return;// not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index f9ec0ff5f..0a8967380 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -118,7 +118,7 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < interval_ms) return; // not enough time + if (tusb_time_millis_api() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/typec/power_delivery/src/main.c b/examples/typec/power_delivery/src/main.c index de0db4721..f6191bfe8 100644 --- a/examples/typec/power_delivery/src/main.c +++ b/examples/typec/power_delivery/src/main.c @@ -184,7 +184,7 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if ( tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/hw/bsp/at32f402_405/family.c b/hw/bsp/at32f402_405/family.c index a6c2217fe..b7dbcbd98 100644 --- a/hw/bsp/at32f402_405/family.c +++ b/hw/bsp/at32f402_405/family.c @@ -258,7 +258,7 @@ size_t board_get_unique_id(uint8_t id[], size_t max_len) { system_ticks++; } - uint32_t board_millis(void) + uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/at32f403a_407/family.c b/hw/bsp/at32f403a_407/family.c index dd9b85dc5..d4a7e446d 100644 --- a/hw/bsp/at32f403a_407/family.c +++ b/hw/bsp/at32f403a_407/family.c @@ -250,7 +250,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/at32f413/family.c b/hw/bsp/at32f413/family.c index bdaed523c..adf29e097 100644 --- a/hw/bsp/at32f413/family.c +++ b/hw/bsp/at32f413/family.c @@ -250,7 +250,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/at32f415/family.c b/hw/bsp/at32f415/family.c index 2fbd4c821..b592bf6c5 100644 --- a/hw/bsp/at32f415/family.c +++ b/hw/bsp/at32f415/family.c @@ -246,7 +246,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/at32f423/family.c b/hw/bsp/at32f423/family.c index f30c6a83f..71cb559dc 100644 --- a/hw/bsp/at32f423/family.c +++ b/hw/bsp/at32f423/family.c @@ -250,7 +250,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/at32f425/family.c b/hw/bsp/at32f425/family.c index 4ff4c8d6a..7f443509e 100644 --- a/hw/bsp/at32f425/family.c +++ b/hw/bsp/at32f425/family.c @@ -254,7 +254,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/at32f435_437/family.c b/hw/bsp/at32f435_437/family.c index 01dd429f8..6c6bc4d72 100644 --- a/hw/bsp/at32f435_437/family.c +++ b/hw/bsp/at32f435_437/family.c @@ -320,7 +320,7 @@ volatile uint32_t system_ticks = 0; void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } void SVC_Handler(void) { diff --git a/hw/bsp/at32f45x/family.c b/hw/bsp/at32f45x/family.c index 0593e5115..fa0c1139f 100644 --- a/hw/bsp/at32f45x/family.c +++ b/hw/bsp/at32f45x/family.c @@ -227,7 +227,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 483d9dc28..91e7de9fe 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -161,10 +161,6 @@ void board_putchar(int c) { (void) sys_write(0, (const char*)&c, 1); } -uint32_t tusb_time_millis_api(void) { - return board_millis(); -} - //-------------------------------------------------------------------- // FreeRTOS hooks //-------------------------------------------------------------------- diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 606ac484f..4487871eb 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -98,43 +98,6 @@ int board_uart_read(uint8_t *buf, int len); // Send characters to UART. Return number of sent bytes int board_uart_write(void const *buf, int len); -#if CFG_TUSB_OS == OPT_OS_NONE -// Get current milliseconds, must be implemented when no RTOS is used -uint32_t board_millis(void); - -#elif CFG_TUSB_OS == OPT_OS_FREERTOS -static inline uint32_t board_millis(void) { - return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ ); -} - -#elif CFG_TUSB_OS == OPT_OS_MYNEWT -static inline uint32_t board_millis(void) { - return os_time_ticks_to_ms32( os_time_get() ); -} - -#elif CFG_TUSB_OS == OPT_OS_PICO -#include "pico/time.h" -static inline uint32_t board_millis(void) { - return to_ms_since_boot(get_absolute_time()); -} - -#elif CFG_TUSB_OS == OPT_OS_RTTHREAD -static inline uint32_t board_millis(void) { - return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); -} - -#elif CFG_TUSB_OS == OPT_OS_CUSTOM -// Implement your own board_millis() in any of .c file -uint32_t board_millis(void); - -#elif CFG_TUSB_OS == OPT_OS_ZEPHYR -static inline uint32_t board_millis(void) { - return k_uptime_get_32(); -} -#else - #error "board_millis() is not implemented for this OS" -#endif - //--------------------------------------------------------------------+ // Helper functions //--------------------------------------------------------------------+ @@ -175,8 +138,8 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars // TODO remove static inline void board_delay(uint32_t ms) { - uint32_t start_ms = board_millis(); - while ( board_millis() - start_ms < ms ) { + uint32_t start_ms = tusb_time_millis_api(); + while ( tusb_time_millis_api() - start_ms < ms ) { // take chance to run usb background #if CFG_TUD_ENABLED tud_task(); diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c index f8f3b0b70..399397bb4 100644 --- a/hw/bsp/broadcom_32bit/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -146,7 +146,7 @@ void TIMER_1_IRQHandler(void) { SYSTMR->CS_b.M1 = 1; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c index f8f3b0b70..399397bb4 100644 --- a/hw/bsp/broadcom_64bit/family.c +++ b/hw/bsp/broadcom_64bit/family.c @@ -146,7 +146,7 @@ void TIMER_1_IRQHandler(void) { SYSTMR->CS_b.M1 = 1; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index 15ff4b8ee..ff24cfe89 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -234,7 +234,7 @@ int board_uart_write(void const *buf, int len) } // Get current milliseconds -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { uint32_t safe_ms; diff --git a/hw/bsp/ch32f20x/family.c b/hw/bsp/ch32f20x/family.c index 7eae62fa4..dd84b7c77 100644 --- a/hw/bsp/ch32f20x/family.c +++ b/hw/bsp/ch32f20x/family.c @@ -101,7 +101,7 @@ void SysTick_Handler(void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/ch32v10x/family.c b/hw/bsp/ch32v10x/family.c index dfc041462..344dcaf0b 100644 --- a/hw/bsp/ch32v10x/family.c +++ b/hw/bsp/ch32v10x/family.c @@ -61,7 +61,7 @@ static uint32_t SysTick_Config(uint32_t ticks) { return 0; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c index 690acee1e..4c22450f9 100644 --- a/hw/bsp/ch32v20x/family.c +++ b/hw/bsp/ch32v20x/family.c @@ -85,7 +85,7 @@ static uint32_t SysTick_Config(uint32_t ticks) { return 0; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/ch32v30x/family.c b/hw/bsp/ch32v30x/family.c index c694f1a08..6295f7723 100644 --- a/hw/bsp/ch32v30x/family.c +++ b/hw/bsp/ch32v30x/family.c @@ -144,7 +144,7 @@ __attribute__((interrupt)) void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/cxd56/family.c b/hw/bsp/cxd56/family.c index a8e2fd52b..fd92bb9d9 100644 --- a/hw/bsp/cxd56/family.c +++ b/hw/bsp/cxd56/family.c @@ -96,7 +96,7 @@ int board_uart_write(void const *buf, int len) } // Get current milliseconds -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { struct timespec tp; diff --git a/hw/bsp/da1469x/family.c b/hw/bsp/da1469x/family.c index a64ffce67..a4f7f2e8d 100644 --- a/hw/bsp/da1469x/family.c +++ b/hw/bsp/da1469x/family.c @@ -140,7 +140,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/efm32/family.c b/hw/bsp/efm32/family.c index 39166bc4d..d318e20d6 100644 --- a/hw/bsp/efm32/family.c +++ b/hw/bsp/efm32/family.c @@ -689,7 +689,7 @@ void SysTick_Handler(void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/f1c100s/family.c b/hw/bsp/f1c100s/family.c index 9e864363f..1e71333d4 100644 --- a/hw/bsp/f1c100s/family.c +++ b/hw/bsp/f1c100s/family.c @@ -79,7 +79,7 @@ int board_uart_write(void const* buf, int len) { #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/fomu/family.c b/hw/bsp/fomu/family.c index 9d7977bea..cf04a1f6f 100644 --- a/hw/bsp/fomu/family.c +++ b/hw/bsp/fomu/family.c @@ -117,7 +117,7 @@ int board_uart_write(void const * buf, int len) } #if CFG_TUSB_OS == OPT_OS_NONE -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index 9d15755fc..4c1099317 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -179,7 +179,7 @@ void eclic_mtip_handler(void) { system_ticks++; SysTick_Reload(TIMER_TICKS); } -uint32_t board_millis(void) { return system_ticks; } +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif #ifdef USE_FULL_ASSERT diff --git a/hw/bsp/hpmicro/family.c b/hw/bsp/hpmicro/family.c index ffec2523a..a80a8d913 100644 --- a/hw/bsp/hpmicro/family.c +++ b/hw/bsp/hpmicro/family.c @@ -108,7 +108,7 @@ int board_uart_write(void const *buf, int len) { #if CFG_TUSB_OS == OPT_OS_NONE // Get current milliseconds, must be implemented when no RTOS is used -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return (hpm_csr_get_core_cycle() / clock_get_core_clock_ticks_per_ms()); } diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index d54b41bdb..c1ee34b1a 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -239,7 +239,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/kinetis_k/family.c b/hw/bsp/kinetis_k/family.c index 98ef52739..1505defe0 100644 --- a/hw/bsp/kinetis_k/family.c +++ b/hw/bsp/kinetis_k/family.c @@ -143,7 +143,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/kinetis_k32l2/family.c b/hw/bsp/kinetis_k32l2/family.c index 2062b8b18..ec8dc6ecf 100644 --- a/hw/bsp/kinetis_k32l2/family.c +++ b/hw/bsp/kinetis_k32l2/family.c @@ -148,7 +148,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/kinetis_kl/family.c b/hw/bsp/kinetis_kl/family.c index c257f4b2b..f89434d06 100644 --- a/hw/bsp/kinetis_kl/family.c +++ b/hw/bsp/kinetis_kl/family.c @@ -142,7 +142,7 @@ void SysTick_Handler(void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/lpc11/family.c b/hw/bsp/lpc11/family.c index c9f18bd2f..76c2bd17c 100644 --- a/hw/bsp/lpc11/family.c +++ b/hw/bsp/lpc11/family.c @@ -130,7 +130,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/lpc13/family.c b/hw/bsp/lpc13/family.c index e212c6a63..8513f4df4 100644 --- a/hw/bsp/lpc13/family.c +++ b/hw/bsp/lpc13/family.c @@ -83,7 +83,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/lpc15/family.c b/hw/bsp/lpc15/family.c index 5f22df175..0d092d3a9 100644 --- a/hw/bsp/lpc15/family.c +++ b/hw/bsp/lpc15/family.c @@ -140,7 +140,7 @@ void SysTick_Handler (void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/lpc17/family.c b/hw/bsp/lpc17/family.c index ba59fccca..f398f7e3c 100644 --- a/hw/bsp/lpc17/family.c +++ b/hw/bsp/lpc17/family.c @@ -145,7 +145,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index 6c02c711f..2043cef99 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -143,7 +143,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/lpc40/family.c b/hw/bsp/lpc40/family.c index 5ea95e9b8..237cd996b 100644 --- a/hw/bsp/lpc40/family.c +++ b/hw/bsp/lpc40/family.c @@ -156,7 +156,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/lpc43/family.c b/hw/bsp/lpc43/family.c index f440fb119..bade53b07 100644 --- a/hw/bsp/lpc43/family.c +++ b/hw/bsp/lpc43/family.c @@ -257,7 +257,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/lpc51/family.c b/hw/bsp/lpc51/family.c index bec86f87f..847972350 100644 --- a/hw/bsp/lpc51/family.c +++ b/hw/bsp/lpc51/family.c @@ -122,7 +122,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index 7bb73afbc..945e27154 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -217,7 +217,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index ad0e502b5..7485ed4d5 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -350,7 +350,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/maxim/family.c b/hw/bsp/maxim/family.c index 7ad7d6ff9..6ef4c12c1 100644 --- a/hw/bsp/maxim/family.c +++ b/hw/bsp/maxim/family.c @@ -202,7 +202,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c index 3b91678b1..a3969c217 100644 --- a/hw/bsp/mcx/family.c +++ b/hw/bsp/mcx/family.c @@ -219,7 +219,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/mm32/family.c b/hw/bsp/mm32/family.c index 663c30818..330b01f6d 100644 --- a/hw/bsp/mm32/family.c +++ b/hw/bsp/mm32/family.c @@ -175,7 +175,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/msp430/family.c b/hw/bsp/msp430/family.c index 390a9915e..413ad7db6 100644 --- a/hw/bsp/msp430/family.c +++ b/hw/bsp/msp430/family.c @@ -102,10 +102,10 @@ static void SystemClock_Config(void) // VUSB enabled automatically. // Wait two milliseconds to stabilize, per manual recommendation. - uint32_t ms_elapsed = board_millis(); + uint32_t ms_elapsed = tusb_time_millis_api(); do { - while((board_millis() - ms_elapsed) < 2); + while((tusb_time_millis_api() - ms_elapsed) < 2); }while(!(USBPWRCTL & USBBGVBV)); // USB uses XT2 (4 MHz) directly. Enable the PLL. @@ -113,11 +113,11 @@ static void SystemClock_Config(void) USBPLLCTL |= (UPFDEN | UPLLEN); // Wait until PLL locks. Check every 2ms, per manual. - ms_elapsed = board_millis(); + ms_elapsed = tusb_time_millis_api(); do { USBPLLIR &= ~USBOOLIFG; - while((board_millis() - ms_elapsed) < 2); + while((tusb_time_millis_api() - ms_elapsed) < 2); }while(USBPLLIR & USBOOLIFG); USBKEYPID = 0; @@ -207,7 +207,7 @@ void TIMER0_A0_ISR (void) { // TAxCCR0 CCIFG resets itself as soon as interrupt is invoked. } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { uint32_t systick_mirror; diff --git a/hw/bsp/msp432e4/family.c b/hw/bsp/msp432e4/family.c index 0e1b0528a..90eb945f4 100644 --- a/hw/bsp/msp432e4/family.c +++ b/hw/bsp/msp432e4/family.c @@ -202,7 +202,7 @@ void SysTick_Handler(void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index ee3ac61e2..04bfbf320 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -296,7 +296,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/nuc100_120/family.c b/hw/bsp/nuc100_120/family.c index 752af2a56..cfe60121c 100644 --- a/hw/bsp/nuc100_120/family.c +++ b/hw/bsp/nuc100_120/family.c @@ -87,7 +87,7 @@ void SysTick_Handler (void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/nuc121_125/family.c b/hw/bsp/nuc121_125/family.c index 089855207..dce5b4d62 100644 --- a/hw/bsp/nuc121_125/family.c +++ b/hw/bsp/nuc121_125/family.c @@ -86,7 +86,7 @@ void SysTick_Handler (void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/nuc126/family.c b/hw/bsp/nuc126/family.c index f992fcab4..3343064e5 100644 --- a/hw/bsp/nuc126/family.c +++ b/hw/bsp/nuc126/family.c @@ -111,7 +111,7 @@ void SysTick_Handler (void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/nuc505/family.c b/hw/bsp/nuc505/family.c index 00ed92310..f1a77e4a5 100644 --- a/hw/bsp/nuc505/family.c +++ b/hw/bsp/nuc505/family.c @@ -88,7 +88,7 @@ void SysTick_Handler (void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/pic32mz/family.c b/hw/bsp/pic32mz/family.c index da97f67a9..2bfc876e1 100644 --- a/hw/bsp/pic32mz/family.c +++ b/hw/bsp/pic32mz/family.c @@ -106,7 +106,7 @@ TU_ATTR_WEAK int board_uart_write(void const * buf, int len) } #if CFG_TUSB_OS == OPT_OS_NONE -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { // COUNTER is system clock (200MHz / 2 = 100MHz) convert to ms) return _CP0_GET_COUNT() / (100000000 / 1000); diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 1f75b47c1..f371e694b 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -169,7 +169,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/rw61x/family.c b/hw/bsp/rw61x/family.c index 265d5fcc0..fcc7fb262 100644 --- a/hw/bsp/rw61x/family.c +++ b/hw/bsp/rw61x/family.c @@ -128,7 +128,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c index 26ad4a6aa..e5b24bf69 100644 --- a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c +++ b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c @@ -248,7 +248,7 @@ void INT_Excep_CMT0_CMI0(void) ++system_ticks; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c index 66a319541..d5c2de05a 100644 --- a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c +++ b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c @@ -299,7 +299,7 @@ void INT_Excep_CMT0_CMI0(void) ++system_ticks; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/samd11/family.c b/hw/bsp/samd11/family.c index 6cbf02412..bccbac8ea 100644 --- a/hw/bsp/samd11/family.c +++ b/hw/bsp/samd11/family.c @@ -155,7 +155,7 @@ void SysTick_Handler (void) system_ticks++; } -uint32_t board_millis(void) +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/samd2x_l2x/family.c b/hw/bsp/samd2x_l2x/family.c index a2dc8a8d4..737219b6c 100644 --- a/hw/bsp/samd2x_l2x/family.c +++ b/hw/bsp/samd2x_l2x/family.c @@ -361,7 +361,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/samd5x_e5x/family.c b/hw/bsp/samd5x_e5x/family.c index 5a7105894..c008b9719 100644 --- a/hw/bsp/samd5x_e5x/family.c +++ b/hw/bsp/samd5x_e5x/family.c @@ -210,7 +210,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/same7x/family.c b/hw/bsp/same7x/family.c index 6feefa3b5..ff6ecf277 100644 --- a/hw/bsp/same7x/family.c +++ b/hw/bsp/same7x/family.c @@ -192,7 +192,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/samg/family.c b/hw/bsp/samg/family.c index 5c5fc3c14..b27134305 100644 --- a/hw/bsp/samg/family.c +++ b/hw/bsp/samg/family.c @@ -148,7 +148,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32c0/family.c b/hw/bsp/stm32c0/family.c index e2ba47f45..e20c0ee15 100644 --- a/hw/bsp/stm32c0/family.c +++ b/hw/bsp/stm32c0/family.c @@ -173,7 +173,7 @@ void SysTick_Handler(void) { HAL_IncTick(); } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c index b99b0a8cc..5a35a3e50 100644 --- a/hw/bsp/stm32f0/family.c +++ b/hw/bsp/stm32f0/family.c @@ -160,7 +160,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c index 3147061cf..fae61ca9e 100644 --- a/hw/bsp/stm32f1/family.c +++ b/hw/bsp/stm32f1/family.c @@ -202,7 +202,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c index f95128040..b901bf4cc 100644 --- a/hw/bsp/stm32f2/family.c +++ b/hw/bsp/stm32f2/family.c @@ -145,7 +145,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/stm32f3/family.c b/hw/bsp/stm32f3/family.c index 95bcc7882..fde1e9f6d 100644 --- a/hw/bsp/stm32f3/family.c +++ b/hw/bsp/stm32f3/family.c @@ -156,7 +156,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index f0e9620f2..665ea114a 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -251,7 +251,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index d8f0da201..ce9049abe 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -312,7 +312,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32g0/family.c b/hw/bsp/stm32g0/family.c index 4b175b0ec..b25897264 100644 --- a/hw/bsp/stm32g0/family.c +++ b/hw/bsp/stm32g0/family.c @@ -181,7 +181,7 @@ void SysTick_Handler(void) { HAL_IncTick(); } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c index d8afa0f95..2e13a1d4b 100644 --- a/hw/bsp/stm32g4/family.c +++ b/hw/bsp/stm32g4/family.c @@ -211,7 +211,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/stm32h5/family.c b/hw/bsp/stm32h5/family.c index fdb12e44f..1e8acd502 100644 --- a/hw/bsp/stm32h5/family.c +++ b/hw/bsp/stm32h5/family.c @@ -207,7 +207,7 @@ void SysTick_Handler(void) { HAL_IncTick(); } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index a320a7e72..2759dac63 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -295,7 +295,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32h7rs/family.c b/hw/bsp/stm32h7rs/family.c index 2cc39b7ac..3bf75ba97 100644 --- a/hw/bsp/stm32h7rs/family.c +++ b/hw/bsp/stm32h7rs/family.c @@ -468,7 +468,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c index 6aeab1259..192f014f4 100644 --- a/hw/bsp/stm32l0/family.c +++ b/hw/bsp/stm32l0/family.c @@ -168,7 +168,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c index 65f6b9ab3..c87b643b8 100644 --- a/hw/bsp/stm32l4/family.c +++ b/hw/bsp/stm32l4/family.c @@ -231,7 +231,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32n6/family.c b/hw/bsp/stm32n6/family.c index c839e6b3e..4354616c3 100644 --- a/hw/bsp/stm32n6/family.c +++ b/hw/bsp/stm32n6/family.c @@ -366,7 +366,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32u0/family.c b/hw/bsp/stm32u0/family.c index 50b513d8f..0f91d1f30 100644 --- a/hw/bsp/stm32u0/family.c +++ b/hw/bsp/stm32u0/family.c @@ -174,7 +174,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index dfcf5c537..55ca25d58 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -270,7 +270,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c index 153d10a09..de503c072 100644 --- a/hw/bsp/stm32wb/family.c +++ b/hw/bsp/stm32wb/family.c @@ -174,7 +174,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/stm32wba/family.c b/hw/bsp/stm32wba/family.c index d05415755..e058a80a1 100644 --- a/hw/bsp/stm32wba/family.c +++ b/hw/bsp/stm32wba/family.c @@ -198,7 +198,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { return system_ticks; } +uint32_t tusb_time_millis_api(void) { return system_ticks; } #endif void HardFault_Handler(void) { asm( "bkpt 1" ); } diff --git a/hw/bsp/tm4c/family.c b/hw/bsp/tm4c/family.c index ae7f22f00..503d0a8c9 100644 --- a/hw/bsp/tm4c/family.c +++ b/hw/bsp/tm4c/family.c @@ -211,7 +211,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/hw/bsp/xmc4000/family.c b/hw/bsp/xmc4000/family.c index 6fef53025..d0acd04cb 100644 --- a/hw/bsp/xmc4000/family.c +++ b/hw/bsp/xmc4000/family.c @@ -147,7 +147,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) { +uint32_t tusb_time_millis_api(void) { return system_ticks; } diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 9eb0a9337..6ac1405f3 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -90,6 +90,12 @@ // TODO move to a more obvious place/file //--------------------------------------------------------------------+ +// Get current milliseconds, required by some port/configuration without RTOS +extern uint32_t tusb_time_millis_api(void); + +// Delay in milliseconds, use tusb_time_millis_api() by default. required by some port/configuration with no RTOS +extern void tusb_time_delay_ms_api(uint32_t ms); + // flush data cache extern void tusb_app_dcache_flush(uintptr_t addr, uint32_t data_size); diff --git a/src/host/usbh.c b/src/host/usbh.c index 60d78605f..0da5166c2 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -685,7 +685,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { has_deferred_attach = osal_queue_receive(_usbh_daq, &event, 0); } - if (!has_deferred_attach) // skip event queue to process deferred at + if (!has_deferred_attach) // skip event queue to process deferred attach #endif { if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) { diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index b413121a5..9fac0bc1c 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -36,9 +36,6 @@ #include #include "musb_def.h" -//#include "bsp/board_api.h" -extern uint32_t board_millis(void); // TODO remove - typedef uint32_t u32; typedef uint16_t u16; typedef uint8_t u8; diff --git a/src/tusb.c b/src/tusb.c index 40d0e8adf..37aecf693 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -45,21 +45,24 @@ tusb_role_t _tusb_rhport_role[TUP_USBIP_CONTROLLER_NUM] = { TUSB_ROLE_INVALID }; // Weak/Default API, can be overwritten by Application //-------------------------------------------------------------------- - #if CFG_TUSB_OS != OPT_OS_NONE -uint32_t tusb_time_millis_api(void) { +#if CFG_TUSB_OS != OPT_OS_NONE +TU_ATTR_WEAK uint32_t tusb_time_millis_api(void) { return osal_time_millis(); } - #endif TU_ATTR_WEAK void tusb_time_delay_ms_api(uint32_t ms) { -#if CFG_TUSB_OS != OPT_OS_NONE osal_task_delay(ms); +} + #else +// tusb_time_millis_api() must be implemented by user application. + +TU_ATTR_WEAK void tusb_time_delay_ms_api(uint32_t ms) { // delay using millis() const uint32_t time_ms = tusb_time_millis_api(); while ((tusb_time_millis_api() - time_ms) < ms) {} -#endif } +#endif TU_ATTR_WEAK void *tusb_app_virt_to_phys(void *virt_addr) { return virt_addr; diff --git a/src/tusb.h b/src/tusb.h index 742009a2e..3876bf863 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -174,16 +174,6 @@ bool tusb_deinit(uint8_t rhport); #endif -//--------------------------------------------------------------------+ -// -//--------------------------------------------------------------------+ - -// Get current milliseconds, required by some port/configuration without RTOS -extern uint32_t tusb_time_millis_api(void); - -// Delay in milliseconds, use tusb_time_millis_api() by default. required by some port/configuration with no RTOS -extern void tusb_time_delay_ms_api(uint32_t ms); - #ifdef __cplusplus } #endif -- cgit v1.3.1 From ac172f7799852bb0fc67246ca26d50e6cc379bd8 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 2 Mar 2026 11:36:47 +0700 Subject: fix board test without tusb_time_millis_api() --- hw/bsp/espressif/boards/family.c | 10 ++++++++++ hw/bsp/rp2040/family.c | 12 ++++++++++++ 2 files changed, 22 insertions(+) diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index a837417f4..623cdb8b9 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -351,5 +351,15 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx ESP_ERROR_CHECK(spi_device_transmit(max3421_spi, &xact)); return true; } +#endif + +// board test example does not use both device and host stack +#if !CFG_TUD_ENABLED && !CFG_TUH_ENABLED +TU_ATTR_WEAK uint32_t tusb_time_millis_api(void) { + return osal_time_millis(); +} +TU_ATTR_WEAK void tusb_time_delay_ms_api(uint32_t ms) { + osal_task_delay(ms); +} #endif diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index a51b3f758..d68b13dd1 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -377,3 +377,15 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx } #endif + + +// board test example does not use both device and host stack +#if !CFG_TUD_ENABLED && !CFG_TUH_ENABLED +TU_ATTR_WEAK uint32_t tusb_time_millis_api(void) { + return osal_time_millis(); +} + +TU_ATTR_WEAK void tusb_time_delay_ms_api(uint32_t ms) { + osal_task_delay(ms); +} +#endif -- cgit v1.3.1 From 0daa444a9b337262c25fe2a2b4598bd3401464e5 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 2 Mar 2026 15:05:28 +0700 Subject: - rename to usbh_defer_func_ms_async() - call after (enum non-blocking delay) also support rtos now --- src/host/usbh.c | 65 +++++++++++++++++++++-------------------------------- src/host/usbh_pvt.h | 3 +++ 2 files changed, 28 insertions(+), 40 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index 0da5166c2..a674b040e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -201,10 +201,7 @@ typedef struct { uint8_t attach_debouncing_bm; // bitmask for roothub port attach debouncing tuh_bus_info_t dev0_bus; // bus info for dev0 in enumeration usbh_ctrl_xfer_info_t ctrl_xfer_info; // control transfer - - #if CFG_TUSB_OS_HAS_SCHEDULER == 0 // call after only needed for non-scheduler OS usbh_call_after_t call_after; - #endif } usbh_data_t; static usbh_data_t _usbh_data = { @@ -328,6 +325,7 @@ TU_ATTR_ALWAYS_INLINE static inline usbh_class_driver_t const *get_driver(uint8_ // Function Inline and Prototypes //--------------------------------------------------------------------+ static void enum_new_device(hcd_event_t* event); +static void enum_delay_async(uintptr_t state); static void process_remove_event(hcd_event_t *event); static void remove_device_tree(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port); static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); @@ -366,19 +364,12 @@ TU_ATTR_ALWAYS_INLINE static inline bool usbh_setup_send(uint8_t daddr, const ui } // For non-scheduler deferred callback. For scheduler OS: blocking delay then callback -static bool usbh_call_after_ms(uint32_t ms, tusb_defer_func_t func, uintptr_t param) { - #if CFG_TUSB_OS_HAS_SCHEDULER - TU_LOG_USBH("USBH sleep for %u ms\r\n", (unsigned int)ms); - osal_task_delay(ms); - func(param); - #else +bool usbh_defer_func_ms_async(uint32_t ms, tusb_defer_func_t func, uintptr_t param) { TU_ASSERT(_usbh_data.call_after.func == NULL); - TU_LOG_USBH("USBH start timer for %u ms\r\n", (unsigned int)ms); + TU_LOG_USBH("USBH schedule function after %u ms\r\n", (unsigned int)ms); _usbh_data.call_after.func = func; _usbh_data.call_after.arg = param; _usbh_data.call_after.at_ms = tusb_time_millis_api() + ms; - #endif - return true; } @@ -393,6 +384,10 @@ TU_ATTR_ALWAYS_INLINE static inline void usbh_device_close(uint8_t rhport, uint8 // invalidate if enumerating if (daddr == _usbh_data.enumerating_daddr) { _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; + // clear enum delay function of the device being removed + if (_usbh_data.call_after.func == enum_delay_async) { + _usbh_data.call_after.func = NULL; + } } } @@ -662,18 +657,20 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { } #endif - #if CFG_TUSB_OS_HAS_SCHEDULER == 0 // Process call_after_ms function if ms is reached tusb_defer_func_t after_cb = _usbh_data.call_after.func; if (after_cb) { - uint32_t ms = tusb_time_millis_api(); - if (ms >= _usbh_data.call_after.at_ms) { - TU_LOG_USBH("USBH run timer callback\r\n"); + int32_t ms = (int32_t)(_usbh_data.call_after.at_ms - tusb_time_millis_api()); + if (ms <= 0) { + // delay expired, run callback now + TU_LOG_USBH("USBH invoke scheduled function\r\n"); _usbh_data.call_after.func = NULL; after_cb(_usbh_data.call_after.arg); + } else if (timeout_ms > (uint32_t)ms) { + // reduce main event timeout to make sure we don't blocking more than call_after timeout + timeout_ms = (uint32_t)ms; } } - #endif hcd_event_t event; @@ -716,7 +713,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { break; case HCD_EVENT_DEVICE_REMOVE: - TU_LOG_USBH("[%u:%u:%u] USBH DEVICE REMOVED\r\n", event.rhport, event.connection.hub_addr, event.connection.hub_port); + TU_LOG_USBH("[%u:%u:%u] USBH Device Removed\r\n", event.rhport, event.connection.hub_addr, event.connection.hub_port); process_remove_event(&event); break; @@ -1543,19 +1540,8 @@ enum { ENUM_AFTER_SET_ADDRESS_RECOVERY_DELAY, }; - // fallthrough to avoid recursive call of enum_async_delay() - #if CFG_TUSB_OS_HAS_SCHEDULER - #define ENUM_ASYNC_DELAY_OR_FALLTHROUGH(_ms, _state) \ - osal_task_delay(_ms); \ - TU_ATTR_FALLTHROUGH - #else - #define ENUM_ASYNC_DELAY_OR_FALLTHROUGH(_ms, _state) \ - usbh_call_after_ms(_ms, enum_async_delay, _state); \ - break - #endif - // process async delay in enumeration -static void enum_async_delay(uintptr_t state) { +static void enum_delay_async(uintptr_t state) { tuh_bus_info_t *dev0_bus = &_usbh_data.dev0_bus; switch (state) { case ENUM_AFTER_DEBOUNCING_DELAY: @@ -1565,7 +1551,6 @@ static void enum_async_delay(uintptr_t state) { TU_VERIFY(dev0_bus->hub_port != 0, ); TU_ASSERT(hub_port_get_status(dev0_bus->hub_addr, dev0_bus->hub_port, NULL, process_enumeration, ENUM_HUB_RERSET), ); - break; } else #endif { @@ -1577,12 +1562,14 @@ static void enum_async_delay(uintptr_t state) { return; } hcd_port_reset(dev0_bus->rhport); // reset port - ENUM_ASYNC_DELAY_OR_FALLTHROUGH(ENUM_RESET_ROOT_DELAY_MS, ENUM_AFTER_RESET_ROOT_DELAY); + usbh_defer_func_ms_async(ENUM_RESET_ROOT_DELAY_MS, enum_delay_async, ENUM_AFTER_RESET_ROOT_DELAY); } + break; case ENUM_AFTER_RESET_ROOT_DELAY: hcd_port_reset_end(dev0_bus->rhport); - ENUM_ASYNC_DELAY_OR_FALLTHROUGH(ENUM_RESET_ROOT_POST_DELAY_MS, ENUM_AFTER_RESET_ROOT_POST_DELAY); + usbh_defer_func_ms_async(ENUM_RESET_ROOT_POST_DELAY_MS, enum_delay_async, ENUM_AFTER_RESET_ROOT_POST_DELAY); + break; case ENUM_AFTER_RESET_ROOT_POST_DELAY: if (!hcd_port_connect_status(dev0_bus->rhport)) { @@ -1651,7 +1638,7 @@ static void enum_new_device(hcd_event_t *event) { dev0_bus->rhport = event->rhport; dev0_bus->hub_addr = event->connection.hub_addr; dev0_bus->hub_port = event->connection.hub_port; - usbh_call_after_ms(ENUM_DEBOUNCING_DELAY_MS, enum_async_delay, ENUM_AFTER_DEBOUNCING_DELAY); + usbh_defer_func_ms_async(ENUM_DEBOUNCING_DELAY_MS, enum_delay_async, ENUM_AFTER_DEBOUNCING_DELAY); } // process device enumeration @@ -1688,7 +1675,7 @@ static void process_enumeration(tuh_xfer_t *xfer) { case ENUM_HUB_RESET_COMPLETE: // wait for reset to take effect - usbh_call_after_ms(ENUM_RESET_HUB_DELAY_MS, enum_async_delay, ENUM_AFTER_RESET_HUB_DELAY); + usbh_defer_func_ms_async(ENUM_RESET_HUB_DELAY_MS, enum_delay_async, ENUM_AFTER_RESET_HUB_DELAY); break; case ENUM_HUB_CLEAR_RESET: @@ -1702,7 +1689,7 @@ static void process_enumeration(tuh_xfer_t *xfer) { ENUM_HUB_CLEAR_RESET_COMPLETE), ); } else if (state == ENUM_HUB_CLEAR_RESET) { // retry one more time if reset change not set yet - usbh_call_after_ms(ENUM_RESET_HUB_DELAY_MS, enum_async_delay, ENUM_AFTER_RESET_HUB_DELAY_RETRY); + usbh_defer_func_ms_async(ENUM_RESET_HUB_DELAY_MS, enum_delay_async, ENUM_AFTER_RESET_HUB_DELAY_RETRY); } else { // retry but still not set --> failed enum_full_complete(false); @@ -1729,7 +1716,7 @@ static void process_enumeration(tuh_xfer_t *xfer) { #endif case ENUM_ADDR0_DEVICE_DESC: - usbh_call_after_ms(ENUM_RESET_RECOVERY_DELAY_MS, enum_async_delay, ENUM_AFTER_RESET_RECOVERY_DELAY); + usbh_defer_func_ms_async(ENUM_RESET_RECOVERY_DELAY_MS, enum_delay_async, ENUM_AFTER_RESET_RECOVERY_DELAY); break; case ENUM_SET_ADDR: { @@ -1754,7 +1741,7 @@ static void process_enumeration(tuh_xfer_t *xfer) { _usbh_data.enumerating_daddr = new_addr; usbh_device_close(dev0_bus->rhport, 0); // close dev0 - usbh_call_after_ms(ENUM_SET_ADDRESS_RECOVERY_DELAY_MS, enum_async_delay, ENUM_AFTER_SET_ADDRESS_RECOVERY_DELAY); + usbh_defer_func_ms_async(ENUM_SET_ADDRESS_RECOVERY_DELAY_MS, enum_delay_async, ENUM_AFTER_SET_ADDRESS_RECOVERY_DELAY); break; } @@ -2048,9 +2035,7 @@ static void enum_full_complete(bool success) { (void)success; _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; // mark enumeration as complete - #if CFG_TUSB_OS_HAS_SCHEDULER == 0 _usbh_data.call_after.func = NULL; - #endif #if CFG_TUH_HUB // Hub status is already requested in case of successful enumeration diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index ecb692e9d..bc8658b9a 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -71,6 +71,9 @@ void usbh_int_set(bool enabled); // Invoke this function later in tuh_task() by putting it into task queue void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr); +// Schedules a function to be called after certain time in async manner +bool usbh_defer_func_ms_async(uint32_t ms, tusb_defer_func_t func, uintptr_t param); + void usbh_spin_lock(bool in_isr); void usbh_spin_unlock(bool in_isr); -- cgit v1.3.1 From 4df7ef54396e1695aa9504aef9dfe4263569c3f6 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 2 Mar 2026 17:51:48 +0700 Subject: fix call_after timeout adjustment with rtos --- hw/bsp/stm32h7/boards/stm32h743eval/board.h | 4 ++-- src/host/usbh.c | 10 +++++++--- src/host/usbh_pvt.h | 2 +- 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 0f0eb4ed3..d2f61a5ce 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -120,10 +120,10 @@ static inline void SystemClock_Config(void) { // From H743 eval manual ETM can only work at 50 MHz clock by default because ETM signals // are shared with other peripherals. Trace CLK = PLL1R. RCC_OscInitStruct.PLL.PLLM = 5; - RCC_OscInitStruct.PLL.PLLN = 160; // May reduce to 200 Mhz when tracing to avoid overflowing trace buffer + RCC_OscInitStruct.PLL.PLLN = 160; // May reduce to 100/200 Mhz when tracing to avoid overflowing trace buffer RCC_OscInitStruct.PLL.PLLP = 2; RCC_OscInitStruct.PLL.PLLQ = 4; - RCC_OscInitStruct.PLL.PLLR = 16; // Trace clock is limit to 50 Mhz to meet board requirement + RCC_OscInitStruct.PLL.PLLR = RCC_OscInitStruct.PLL.PLLN/10; // Trace clock is limit to 50 Mhz to meet board requirement RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; RCC_OscInitStruct.PLL.PLLFRACN = 0; diff --git a/src/host/usbh.c b/src/host/usbh.c index a674b040e..5cf0096f2 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -363,7 +363,6 @@ TU_ATTR_ALWAYS_INLINE static inline bool usbh_setup_send(uint8_t daddr, const ui return ret; } -// For non-scheduler deferred callback. For scheduler OS: blocking delay then callback bool usbh_defer_func_ms_async(uint32_t ms, tusb_defer_func_t func, uintptr_t param) { TU_ASSERT(_usbh_data.call_after.func == NULL); TU_LOG_USBH("USBH schedule function after %u ms\r\n", (unsigned int)ms); @@ -666,8 +665,12 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { TU_LOG_USBH("USBH invoke scheduled function\r\n"); _usbh_data.call_after.func = NULL; after_cb(_usbh_data.call_after.arg); - } else if (timeout_ms > (uint32_t)ms) { - // reduce main event timeout to make sure we don't blocking more than call_after timeout + } + + // above after_cb() can re-schedule another function, we need to re-check and reduce timeout of + // the main event timeout to make sure we aren't blocking more than call_after timeout. + if (_usbh_data.call_after.func != NULL && + timeout_ms > (uint32_t)(_usbh_data.call_after.at_ms - tusb_time_millis_api())) { timeout_ms = (uint32_t)ms; } } @@ -2033,6 +2036,7 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { static void enum_full_complete(bool success) { (void)success; + TU_LOG_USBH("Enumeration complete: success = %u\r\n", success); _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; // mark enumeration as complete _usbh_data.call_after.func = NULL; diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index bc8658b9a..adb6a8c44 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -71,7 +71,7 @@ void usbh_int_set(bool enabled); // Invoke this function later in tuh_task() by putting it into task queue void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr); -// Schedules a function to be called after certain time in async manner +// Schedules a function to be called after certain time asynchronously bool usbh_defer_func_ms_async(uint32_t ms, tusb_defer_func_t func, uintptr_t param); void usbh_spin_lock(bool in_isr); -- cgit v1.3.1 From 4fa4d39883a6328d4628525cfc163516fd919aba Mon Sep 17 00:00:00 2001 From: Tomas Rezucha Date: Mon, 2 Mar 2026 12:29:09 +0100 Subject: fix(dcd/dwc2): Do not modify FS PHY registers on HS PHY ESP32-P4 --- src/portable/synopsys/dwc2/dcd_dwc2.c | 36 +++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 2e2b050bc..b52646a5d 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -527,34 +527,38 @@ void dcd_remote_wakeup(uint8_t rhport) { } void dcd_connect(uint8_t rhport) { - (void) rhport; dwc2_regs_t* dwc2 = DWC2_REG(rhport); #ifdef TUP_USBIP_DWC2_ESP32 - usb_wrap_otg_conf_reg_t conf = USB_WRAP.otg_conf; - conf.pad_pull_override = 0; - conf.dp_pullup = 0; - conf.dp_pulldown = 0; - conf.dm_pullup = 0; - conf.dm_pulldown = 0; - USB_WRAP.otg_conf = conf; + // On ESP32-P4 HS PHY, do not write to USB_WRAP register which belongs to FS PHY + if (rhport == 0) { + usb_wrap_otg_conf_reg_t conf = USB_WRAP.otg_conf; + conf.pad_pull_override = 0; + conf.dp_pullup = 0; + conf.dp_pulldown = 0; + conf.dm_pullup = 0; + conf.dm_pulldown = 0; + USB_WRAP.otg_conf = conf; + } #endif dwc2->dctl &= ~DCTL_SDIS; } void dcd_disconnect(uint8_t rhport) { - (void) rhport; dwc2_regs_t* dwc2 = DWC2_REG(rhport); #ifdef TUP_USBIP_DWC2_ESP32 - usb_wrap_otg_conf_reg_t conf = USB_WRAP.otg_conf; - conf.pad_pull_override = 1; - conf.dp_pullup = 0; - conf.dp_pulldown = 1; - conf.dm_pullup = 0; - conf.dm_pulldown = 1; - USB_WRAP.otg_conf = conf; + // On ESP32-P4 HS PHY, do not write to USB_WRAP register which belongs to FS PHY + if (rhport == 0) { + usb_wrap_otg_conf_reg_t conf = USB_WRAP.otg_conf; + conf.pad_pull_override = 1; + conf.dp_pullup = 0; + conf.dp_pulldown = 1; + conf.dm_pullup = 0; + conf.dm_pulldown = 1; + USB_WRAP.otg_conf = conf; + } #endif dwc2->dctl |= DCTL_SDIS; -- cgit v1.3.1 From d9a7d1023c1fd38981ecbfc9fbb37bc14c4f85a1 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 2 Mar 2026 20:07:16 +0700 Subject: improve timeout adjustment, exit tuh_task() by timeout_ms = 0 --- src/host/usbh.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index 5cf0096f2..e161d212e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -659,8 +659,8 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // Process call_after_ms function if ms is reached tusb_defer_func_t after_cb = _usbh_data.call_after.func; if (after_cb) { - int32_t ms = (int32_t)(_usbh_data.call_after.at_ms - tusb_time_millis_api()); - if (ms <= 0) { + int32_t remain_ms = (int32_t)(_usbh_data.call_after.at_ms - tusb_time_millis_api()); + if (remain_ms <= 0) { // delay expired, run callback now TU_LOG_USBH("USBH invoke scheduled function\r\n"); _usbh_data.call_after.func = NULL; @@ -669,9 +669,11 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // above after_cb() can re-schedule another function, we need to re-check and reduce timeout of // the main event timeout to make sure we aren't blocking more than call_after timeout. - if (_usbh_data.call_after.func != NULL && - timeout_ms > (uint32_t)(_usbh_data.call_after.at_ms - tusb_time_millis_api())) { - timeout_ms = (uint32_t)ms; + if (_usbh_data.call_after.func != NULL) { + remain_ms = (int32_t) (_usbh_data.call_after.at_ms - tusb_time_millis_api()); + if (remain_ms > 0 && timeout_ms > (uint32_t)remain_ms) { + timeout_ms = (uint32_t)remain_ms; + } } } @@ -789,16 +791,8 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { break; } - #if CFG_TUSB_OS_HAS_SCHEDULER - // return if there are no more events, to allow application to run other backgrounds - if (osal_queue_empty(_usbh_q) - #if CFG_TUH_HUB - && osal_queue_empty(_usbh_daq) - #endif - ) { - return; - } - #endif + // allow to exit tuh_task() if there is no event in the next run + timeout_ms = 0; } } -- cgit v1.3.1 From c0adaca3a5cecb07da686d0c5f0ad9802295c58b Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 2 Mar 2026 20:13:52 +0700 Subject: fix esp32p4 utmi phy init in the new esp-idf, also update esp-idf to v5.5.3 --- .circleci/config2.yml | 2 +- .../actions/setup_toolchain/espressif/action.yml | 2 +- AGENTS.md | 23 ++++++++++++++++ hw/bsp/espressif/boards/family.c | 32 +++++++++++++++------- 4 files changed, 47 insertions(+), 12 deletions(-) diff --git a/.circleci/config2.yml b/.circleci/config2.yml index a31b0a818..bb0ac350f 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -110,7 +110,7 @@ commands: no_output_timeout: 20m command: | if [ << parameters.toolchain >> == esp-idf ]; then - docker run --rm -v $PWD:/project -w /project espressif/idf:v5.3.2 python tools/build.py << parameters.build-args >> --target all << parameters.family >> + docker run --rm -v $PWD:/project -w /project espressif/idf:v5.5.3 python tools/build.py << parameters.build-args >> --target all << parameters.family >> else # Toolchain option default is gcc if [ << parameters.toolchain >> == arm-clang ]; then diff --git a/.github/actions/setup_toolchain/espressif/action.yml b/.github/actions/setup_toolchain/espressif/action.yml index e9d645ac8..90ef753c4 100644 --- a/.github/actions/setup_toolchain/espressif/action.yml +++ b/.github/actions/setup_toolchain/espressif/action.yml @@ -7,7 +7,7 @@ inputs: toolchain_version: description: 'Toolchain version' required: false - default: 'v5.3.2' + default: 'v5.5.3' runs: using: "composite" diff --git a/AGENTS.md b/AGENTS.md index 73bf1f599..53af39545 100644 --- a/AGENTS.md +++ b/AGENTS.md @@ -21,6 +21,8 @@ information that does not match the info here. - For specific board families: `python3 tools/get_deps.py FAMILY_NAME` (e.g., rp2040, stm32f4), or `python3 tools/get_deps.py -b BOARD_NAME` - Dependencies are cached in `lib/` and `hw/mcu/` directories +- For **Espressif** boards, initialize the ESP-IDF environment before any build/flash/monitor command: + `. $HOME/code/esp-idf/export.sh` ## Build Examples @@ -59,6 +61,19 @@ make BOARD=raspberry_pi_pico all -- takes 2-3 seconds. NEVER CANCEL. Set timeout to 5+ minutes. +**Option 4: Espressif Example with ESP-IDF** + +Only ESP-IDF-enabled examples are supported for Espressif boards. Use FreeRTOS examples such as `examples/device/cdc_msc_freertos` +that contain `idf_component_register()` support. + +```bash +. $HOME/code/esp-idf/export.sh +cd examples/device/cdc_msc_freertos +idf.py -DBOARD=espressif_s3_devkitc build +``` + +Use `-DBOARD=...` with any supported board under `hw/bsp/espressif/boards/`. NEVER CANCEL. Set timeout to 10+ minutes. + ## Build Options @@ -90,6 +105,14 @@ make BOARD=raspberry_pi_pico all - CMake: `ninja cdc_msc-uf2` - Make: `make BOARD=raspberry_pi_pico all uf2` - **List all targets** (CMake/Ninja): `ninja -t targets` +- **Espressif flash**: + - Run `. $HOME/code/esp-idf/export.sh` + - `cd examples/device/cdc_msc_freertos` + - `idf.py -DBOARD=espressif_s3_devkitc flash` +- **Espressif serial monitor / chip log output**: + - Run `. $HOME/code/esp-idf/export.sh` + - `cd examples/device/cdc_msc_freertos` + - `idf.py -DBOARD=espressif_s3_devkitc monitor` ## Unit Testing diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 623cdb8b9..2fad7feec 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -50,7 +50,7 @@ static void max3421_init(void); #endif #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4, OPT_MCU_ESP32P4) -static bool usb_init(void); +static bool usb_init(uint8_t rhport, bool is_host); #endif //--------------------------------------------------------------------+ @@ -90,8 +90,14 @@ void board_init(void) { gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32P4) - usb_init(); +#if CONFIG_USB_OTG_SUPPORTED + #if CFG_TUD_ENABLED + usb_init(BOARD_TUD_RHPORT, false); + #endif + + #if CFG_TUH_ENABLED + usb_init(BOARD_TUH_RHPORT, true); + #endif #endif #ifdef HIL_TS3USB30_MODE_PIN @@ -179,24 +185,30 @@ void board_reset_to_bootloader(void) { static usb_phy_handle_t phy_hdl; -bool usb_init(void) { +bool usb_init(uint8_t rhport, bool is_host) { + (void) rhport; // Configure USB PHY usb_phy_config_t phy_conf = { .controller = USB_PHY_CTRL_OTG, +#if defined(CONFIG_SOC_USB_UTMI_PHY_NUM) && CONFIG_SOC_USB_UTMI_PHY_NUM > 0 + .target = USB_PHY_TARGET_UTMI, +#else .target = USB_PHY_TARGET_INT, +#endif // maybe we can use USB_OTG_MODE_DEFAULT and switch using dwc2 driver -#if CFG_TUD_ENABLED - .otg_mode = USB_OTG_MODE_DEVICE, -#elif CFG_TUH_ENABLED - .otg_mode = USB_OTG_MODE_HOST, -#endif + .otg_mode = is_host ? USB_OTG_MODE_HOST : USB_OTG_MODE_DEVICE, // https://github.com/hathach/tinyusb/issues/2943#issuecomment-2601888322 // Set speed to undefined (auto-detect) to avoid timinng/racing issue with S3 with host such as macOS .otg_speed = USB_PHY_SPEED_UNDEFINED, }; - usb_new_phy(&phy_conf, &phy_hdl); + esp_err_t const err = usb_new_phy(&phy_conf, &phy_hdl); + if (err != ESP_OK) { + printf("usb_new_phy failed: %s\r\n", esp_err_to_name(err)); + phy_hdl = NULL; + return false; + } return true; } -- cgit v1.3.1 From 2a27bd9db0f97f2d5034336626accbe2bb6bd330 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 2 Mar 2026 22:32:15 +0700 Subject: more call_after timeout adjustment with rtos --- src/host/usbh.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/src/host/usbh.c b/src/host/usbh.c index e161d212e..20791340e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -668,10 +668,12 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { } // above after_cb() can re-schedule another function, we need to re-check and reduce timeout of - // the main event timeout to make sure we aren't blocking more than call_after timeout. + // the main event timeout to make sure we aren't blocking more than call_after remaining ms. if (_usbh_data.call_after.func != NULL) { remain_ms = (int32_t) (_usbh_data.call_after.at_ms - tusb_time_millis_api()); - if (remain_ms > 0 && timeout_ms > (uint32_t)remain_ms) { + if (remain_ms <= 0) { + timeout_ms = 0; // expired already + } else if (timeout_ms > (uint32_t)remain_ms) { timeout_ms = (uint32_t)remain_ms; } } -- cgit v1.3.1 From e4950e9b693171f7bb47d8c1f800ece8827242ec Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 3 Mar 2026 18:25:18 +0700 Subject: add esptool --force for esp32p4 v0.1 --- test/hil/hil_test.py | 2 +- test/hil/tinyusb.json | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index b84740867..757456806 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -302,7 +302,7 @@ def flash_esptool(board, firmware): idf_target = json.load(f)['IDF_TARGET'] with open(f'{fw_dir}/flash_args') as f: flash_args = f.read().strip().replace('\n', ' ') - command = (f'esptool.py --chip {idf_target} -p {port} {flasher["args"]} ' + command = (f'esptool --chip {idf_target} -p {port} {flasher["args"]} ' f'--before=default_reset --after=hard_reset write_flash {flash_args}') ret = run_cmd(command, cwd=fw_dir) return ret diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 7cb561b2d..4d7276c8f 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -13,7 +13,8 @@ "flasher": { "name": "esptool", "uid": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", - "args": "-b 1500000" + "args": "-b 1500000 --force", + "comment": "use --force for ESP32-P4 v0.1" }, "comment": "Use TS3USB30 mux to test both device and host" }, -- cgit v1.3.1 From 70eb68982309df4bd769958d8bad6a3ed9a526d9 Mon Sep 17 00:00:00 2001 From: Robert Dale Smith Date: Tue, 3 Mar 2026 23:01:14 -0600 Subject: fix(bsp/rp2040): use MAX3421_SPI in spi_write_read_blocking The write+read path in tuh_max3421_spi_xfer_api() hardcodes spi0 instead of using the MAX3421_SPI define. This causes a hang on boards wired to spi1 (e.g. Feather RP2040 USB Host + MAX3421E FeatherWing) since spi_write_read_blocking() blocks forever on an uninitialized SPI peripheral. The read-only and write-only paths already use MAX3421_SPI correctly. --- hw/bsp/rp2040/family.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 989140e02..59e07e7f2 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -368,7 +368,7 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx }else if (rx_buf == NULL) { ret = spi_write_blocking(MAX3421_SPI, tx_buf, xfer_bytes); }else { - ret = spi_write_read_blocking(spi0, tx_buf, rx_buf, xfer_bytes); + ret = spi_write_read_blocking(MAX3421_SPI, tx_buf, rx_buf, xfer_bytes); } return ret == (int) xfer_bytes; -- cgit v1.3.1 From 30af158af9ada161d31e02d08548f78390183920 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 4 Mar 2026 17:30:40 +0700 Subject: add PHY deinitialization support for DWC2 driver across all MCUs --- src/portable/synopsys/dwc2/dcd_dwc2.c | 6 ------ src/portable/synopsys/dwc2/dwc2_at32.h | 5 +++++ src/portable/synopsys/dwc2/dwc2_bcm.h | 6 ++++++ src/portable/synopsys/dwc2/dwc2_common.c | 27 +++++++++++++-------------- src/portable/synopsys/dwc2/dwc2_common.h | 1 + src/portable/synopsys/dwc2/dwc2_efm32.h | 8 ++++++++ src/portable/synopsys/dwc2/dwc2_esp32.h | 6 ++++++ src/portable/synopsys/dwc2/dwc2_gd32.h | 6 ++++++ src/portable/synopsys/dwc2/dwc2_nrf.h | 5 +++++ src/portable/synopsys/dwc2/dwc2_stm32.h | 14 ++++++++++++++ src/portable/synopsys/dwc2/dwc2_xmc.h | 7 +++++++ src/portable/synopsys/dwc2/hcd_dwc2.c | 16 ++++++++++++++-- 12 files changed, 85 insertions(+), 22 deletions(-) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 2c76098a4..8685ec6dc 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -493,13 +493,7 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { } bool dcd_deinit(uint8_t rhport) { - dwc2_regs_t* dwc2 = DWC2_REG(rhport); - - // Disable global interrupt - dwc2->gahbcfg &= ~GAHBCFG_GINT; - dcd_disconnect(rhport); - dwc2_core_deinit(rhport); return true; } diff --git a/src/portable/synopsys/dwc2/dwc2_at32.h b/src/portable/synopsys/dwc2/dwc2_at32.h index 10824ae92..95ee8a8e1 100644 --- a/src/portable/synopsys/dwc2/dwc2_at32.h +++ b/src/portable/synopsys/dwc2/dwc2_at32.h @@ -112,6 +112,11 @@ TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t *dwc2, uint8_ } } +// MCU specific PHY deinit, disable PHY power +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_deinit(dwc2_regs_t *dwc2) { + dwc2->stm32_gccfg &= ~(STM32_GCCFG_PWRDWN | STM32_GCCFG_DCDEN | STM32_GCCFG_PDEN); +} + // MCU specific PHY update, it is called AFTER init() and core reset TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_update(dwc2_regs_t *dwc2, uint8_t hs_phy_type) { (void) dwc2; diff --git a/src/portable/synopsys/dwc2/dwc2_bcm.h b/src/portable/synopsys/dwc2/dwc2_bcm.h index df6d4a852..852db15e5 100644 --- a/src/portable/synopsys/dwc2/dwc2_bcm.h +++ b/src/portable/synopsys/dwc2/dwc2_bcm.h @@ -73,6 +73,12 @@ static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) // nothing to do } +// MCU specific PHY deinit, disable PHY power +static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2) { + (void) dwc2; + // nothing to do +} + // MCU specific PHY update, it is called AFTER init() and core reset static inline void dwc2_phy_update(dwc2_regs_t * dwc2, uint8_t hs_phy_type) { diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index a6afc3154..4e8e1ff04 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -39,14 +39,11 @@ static void reset_core(dwc2_regs_t* dwc2) { while (!(dwc2->grstctl & GRSTCTL_AHBIDL)) { } - // load gsnpsid (it is not readable after reset is asserted) - const uint32_t gsnpsid = dwc2->gsnpsid; - - // reset core - dwc2->grstctl |= GRSTCTL_CSRST; + const uint32_t gsnpsid = dwc2->gsnpsid; // preload gsnpsid which is not readable while resetting + dwc2->grstctl |= GRSTCTL_CSRST; // reset core if ((gsnpsid & DWC2_CORE_REV_MASK) < (DWC2_CORE_REV_4_20a & DWC2_CORE_REV_MASK)) { - // prior v4.20a: CSRST is self-clearing and the core clears this bit after all the necessary logic is reset in + // prior v4.20a: CSRST is self-clearing, and the core clears this bit after all the necessary logic is reset in // the core, which can take several clocks, depending on the current state of the core. Once this bit has been // cleared, the software must wait at least 3 PHY clocks before accessing the PHY domain (synchronization delay). while (dwc2->grstctl & GRSTCTL_CSRST) {} @@ -88,8 +85,7 @@ static void phy_fs_init(dwc2_regs_t* dwc2) { } /* dwc2 has 2 highspeed PHYs options - * - UTMI+ is internal highspeed PHY, can be clocked at 30/60 Mhz for fullspeed or 60 Mhz for highspeed. Can be either - * 8 or 16-bit interface. + * - UTMI+ is internal highspeed PHY, can be clocked at 30 Mhz (8-bit) or 60 Mhz (16-bit). * - ULPI is external highspeed PHY, clocked at 60Mhz with 8-bit interface. * * In addition, UTMI+/ULPI can be shared to run at fullspeed mode with 48Mhz @@ -250,14 +246,17 @@ bool dwc2_core_init(uint8_t rhport, bool is_hs_phy, bool is_dma) { void dwc2_core_deinit(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); - // Soft disconnect - dwc2->dctl |= DCTL_SDIS; - - // Reset global registers - dwc2->gotgctl = 0; + // Disable global interrupt + dwc2->gahbcfg &= ~GAHBCFG_GINT; - // Reset core + // Reset core: this also flushes FIFOs and clears all interrupt registers reset_core(dwc2); + + // Stop PHY clock and gate HCLK for power saving (per databook chapter 14) + dwc2->pcgcctl |= PCGCCTL_STOPPCLK | PCGCCTL_GATEHCLK; + + // MCU-specific PHY deinit (disable PHY power) + dwc2_phy_deinit(dwc2); } // void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr) { diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index c74ad2233..ac97ab3d5 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -42,6 +42,7 @@ // - _dwc2_controller[]: array of controllers // - DWC2_EP_MAX: largest EP counts of all controllers // - dwc2_phy_init/dwc2_phy_update: phy init called before and after core reset +// - dwc2_phy_deinit: phy deinit to disable PHY power // - dwc2_dcd_int_enable/dwc2_dcd_int_disable // - dwc2_remote_wakeup_delay diff --git a/src/portable/synopsys/dwc2/dwc2_efm32.h b/src/portable/synopsys/dwc2/dwc2_efm32.h index 0e3570cbb..f808b567c 100644 --- a/src/portable/synopsys/dwc2/dwc2_efm32.h +++ b/src/portable/synopsys/dwc2/dwc2_efm32.h @@ -72,6 +72,14 @@ static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) USB->ROUTE = USB_ROUTE_PHYPEN; } +// MCU specific PHY deinit, disable PHY power +static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2) { + (void) dwc2; + + // Disable PHY pin + USB->ROUTE = 0; +} + // MCU specific PHY update, it is called AFTER init() and core reset static inline void dwc2_phy_update(dwc2_regs_t * dwc2, uint8_t hs_phy_type) { diff --git a/src/portable/synopsys/dwc2/dwc2_esp32.h b/src/portable/synopsys/dwc2/dwc2_esp32.h index a4e0d1770..f4fa0bf8b 100644 --- a/src/portable/synopsys/dwc2/dwc2_esp32.h +++ b/src/portable/synopsys/dwc2/dwc2_esp32.h @@ -121,6 +121,12 @@ TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_ } +// MCU specific PHY deinit, disable PHY power +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_deinit(dwc2_regs_t* dwc2) { + (void)dwc2; + // PHY managed by ESP-IDF +} + // MCU specific PHY update, it is called AFTER init() and core reset TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_update(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { (void)dwc2; diff --git a/src/portable/synopsys/dwc2/dwc2_gd32.h b/src/portable/synopsys/dwc2/dwc2_gd32.h index 0375fffe4..26b924161 100644 --- a/src/portable/synopsys/dwc2/dwc2_gd32.h +++ b/src/portable/synopsys/dwc2/dwc2_gd32.h @@ -85,6 +85,12 @@ static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) // nothing to do } +// MCU specific PHY deinit, disable PHY power +static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2) { + (void) dwc2; + // nothing to do +} + // MCU specific PHY update, it is called AFTER init() and core reset static inline void dwc2_phy_update(dwc2_regs_t * dwc2, uint8_t hs_phy_type) { diff --git a/src/portable/synopsys/dwc2/dwc2_nrf.h b/src/portable/synopsys/dwc2/dwc2_nrf.h index b93571f16..17d21518b 100644 --- a/src/portable/synopsys/dwc2/dwc2_nrf.h +++ b/src/portable/synopsys/dwc2/dwc2_nrf.h @@ -52,6 +52,11 @@ TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_ (void)hs_phy_type; } +// MCU specific PHY deinit, disable PHY power +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_deinit(dwc2_regs_t* dwc2) { + (void)dwc2; +} + // MCU specific PHY update, it is called AFTER init() and core reset TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_update(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { (void)dwc2; diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 753917a20..cc972e957 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -264,6 +264,20 @@ static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { } } +// MCU specific PHY deinit, disable PHY power +static inline void dwc2_phy_deinit(dwc2_regs_t* dwc2) { + // Disable on-chip FS PHY + dwc2->stm32_gccfg &= ~STM32_GCCFG_PWRDWN; + + // Disable HS PHY if present + #ifdef USB_HS_PHYC + dwc2->stm32_gccfg &= ~STM32_GCCFG_PHYHSEN; + // Disable PLL and LDO + USB_HS_PHYC->USB_HS_PHYC_PLL &= ~USB_HS_PHYC_PLL_PLLEN; + USB_HS_PHYC->USB_HS_PHYC_LDO &= ~USB_HS_PHYC_LDO_ENABLE; + #endif +} + // MCU specific PHY update, it is called AFTER init() and core reset static inline void dwc2_phy_update(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { // used to set turnaround time for fullspeed, nothing to do in highspeed mode diff --git a/src/portable/synopsys/dwc2/dwc2_xmc.h b/src/portable/synopsys/dwc2/dwc2_xmc.h index 63419abf7..e38935e9c 100644 --- a/src/portable/synopsys/dwc2/dwc2_xmc.h +++ b/src/portable/synopsys/dwc2/dwc2_xmc.h @@ -71,6 +71,13 @@ static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) //USB->ROUTE = USB_ROUTE_PHYPEN; } +// MCU specific PHY deinit, disable PHY power +static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2) { + (void) dwc2; + + // nothing to do +} + // MCU specific PHY update, it is called AFTER init() and core reset static inline void dwc2_phy_update(dwc2_regs_t * dwc2, uint8_t hs_phy_type) { diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 420b3fe4b..e12e44a41 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -448,8 +448,9 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { bool hcd_deinit(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); - // Disable global interrupt - dwc2->gahbcfg &= ~GAHBCFG_GINT; + // Turn off VBUS + dwc2->hprt = HPRT_W1_MASK; // clear w1c bits without side effects + // HPRT_POWER is not set -> VBUS off dwc2_core_deinit(rhport); return true; @@ -1359,6 +1360,17 @@ static bool handle_sof_irq(uint8_t rhport, bool in_isr) { } // Config HCFG FS/LS clock and HFIR for SOF interval according to link speed (value is in PHY clock unit) +// Databook Table 2-2: System Clock Speeds +// +-----------+------------------+----------+-----------+-------------------+ +// | PHY | PHY Clock (MHz) | Width | HCFG.Sel | HFIR (clk cycles) | +// +-----------+------------------+----------+-----------+-------------------+ +// | HS UTMI+ | 30 | 16-bit | 30_60 | HS:3749 FS:29999 | +// | HS UTMI+ | 60 | 8-bit | 30_60 | HS:7499 FS:59999 | +// | HS ULPI | 60 | 8-bit | 30_60 | HS:7499 FS:59999 | +// | FS (dead.) | 48 | internal | 48 | FS:47999 | +// | LS via FS | 48 (6 effective) | internal | 6 | LS:47999 | +// +-----------+------------------+----------+-----------+-------------------+ +// HFIR = (interval_us * phy_clock) - 1, where interval is 125us (HS) or 1000us (FS/LS) static void port0_enable(dwc2_regs_t* dwc2, tusb_speed_t speed) { uint32_t hcfg = dwc2->hcfg & ~HCFG_FSLS_PHYCLK_SEL; -- cgit v1.3.1 From 3fb668c2ac7ed612102221d086179d4a61f03c8d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 4 Mar 2026 17:44:14 +0700 Subject: replace board_millis() with tusb_time_millis_api() in dynamic_switch example --- examples/dual/dynamic_switch/src/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/examples/dual/dynamic_switch/src/main.c b/examples/dual/dynamic_switch/src/main.c index bc9dabc66..c9ad2a835 100644 --- a/examples/dual/dynamic_switch/src/main.c +++ b/examples/dual/dynamic_switch/src/main.c @@ -485,7 +485,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); -- cgit v1.3.1 From 80a05cfcafbaa279c3b0e71d9c26bccaffe11bc4 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Wed, 4 Mar 2026 18:08:07 +0700 Subject: "Claude PR Assistant workflow" --- .github/workflows/claude.yml | 50 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 .github/workflows/claude.yml diff --git a/.github/workflows/claude.yml b/.github/workflows/claude.yml new file mode 100644 index 000000000..d300267f1 --- /dev/null +++ b/.github/workflows/claude.yml @@ -0,0 +1,50 @@ +name: Claude Code + +on: + issue_comment: + types: [created] + pull_request_review_comment: + types: [created] + issues: + types: [opened, assigned] + pull_request_review: + types: [submitted] + +jobs: + claude: + if: | + (github.event_name == 'issue_comment' && contains(github.event.comment.body, '@claude')) || + (github.event_name == 'pull_request_review_comment' && contains(github.event.comment.body, '@claude')) || + (github.event_name == 'pull_request_review' && contains(github.event.review.body, '@claude')) || + (github.event_name == 'issues' && (contains(github.event.issue.body, '@claude') || contains(github.event.issue.title, '@claude'))) + runs-on: ubuntu-latest + permissions: + contents: read + pull-requests: read + issues: read + id-token: write + actions: read # Required for Claude to read CI results on PRs + steps: + - name: Checkout repository + uses: actions/checkout@v4 + with: + fetch-depth: 1 + + - name: Run Claude Code + id: claude + uses: anthropics/claude-code-action@v1 + with: + claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }} + + # This is an optional setting that allows Claude to read CI results on PRs + additional_permissions: | + actions: read + + # Optional: Give a custom prompt to Claude. If this is not specified, Claude will perform the instructions specified in the comment that tagged it. + # prompt: 'Update the pull request description to include a summary of changes.' + + # Optional: Add claude_args to customize behavior and configuration + # See https://github.com/anthropics/claude-code-action/blob/main/docs/usage.md + # or https://code.claude.com/docs/en/cli-reference for available options + # claude_args: '--allowed-tools Bash(gh pr:*)' + -- cgit v1.3.1 From 8479c086796e53205c34142038c65f885c2e3e76 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Wed, 4 Mar 2026 18:08:08 +0700 Subject: "Claude Code Review workflow" --- .github/workflows/claude-code-review.yml | 44 ++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 .github/workflows/claude-code-review.yml diff --git a/.github/workflows/claude-code-review.yml b/.github/workflows/claude-code-review.yml new file mode 100644 index 000000000..b5e8cfd4d --- /dev/null +++ b/.github/workflows/claude-code-review.yml @@ -0,0 +1,44 @@ +name: Claude Code Review + +on: + pull_request: + types: [opened, synchronize, ready_for_review, reopened] + # Optional: Only run on specific file changes + # paths: + # - "src/**/*.ts" + # - "src/**/*.tsx" + # - "src/**/*.js" + # - "src/**/*.jsx" + +jobs: + claude-review: + # Optional: Filter by PR author + # if: | + # github.event.pull_request.user.login == 'external-contributor' || + # github.event.pull_request.user.login == 'new-developer' || + # github.event.pull_request.author_association == 'FIRST_TIME_CONTRIBUTOR' + + runs-on: ubuntu-latest + permissions: + contents: read + pull-requests: read + issues: read + id-token: write + + steps: + - name: Checkout repository + uses: actions/checkout@v4 + with: + fetch-depth: 1 + + - name: Run Claude Code Review + id: claude-review + uses: anthropics/claude-code-action@v1 + with: + claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }} + plugin_marketplaces: 'https://github.com/anthropics/claude-code.git' + plugins: 'code-review@claude-code-plugins' + prompt: '/code-review:code-review ${{ github.repository }}/pull/${{ github.event.pull_request.number }}' + # See https://github.com/anthropics/claude-code-action/blob/main/docs/usage.md + # or https://code.claude.com/docs/en/cli-reference for available options + -- cgit v1.3.1 From f021d5c1e1de5c1b47fcbdd6d8fb1eea70eafe61 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 4 Mar 2026 18:13:51 +0700 Subject: fix trailing newline in workflow files to pass pre-commit Co-Authored-By: Claude Sonnet 4.6 --- .github/workflows/claude-code-review.yml | 1 - .github/workflows/claude.yml | 1 - CLAUDE.md | 1 + 3 files changed, 1 insertion(+), 2 deletions(-) create mode 120000 CLAUDE.md diff --git a/.github/workflows/claude-code-review.yml b/.github/workflows/claude-code-review.yml index b5e8cfd4d..25f4ad18c 100644 --- a/.github/workflows/claude-code-review.yml +++ b/.github/workflows/claude-code-review.yml @@ -41,4 +41,3 @@ jobs: prompt: '/code-review:code-review ${{ github.repository }}/pull/${{ github.event.pull_request.number }}' # See https://github.com/anthropics/claude-code-action/blob/main/docs/usage.md # or https://code.claude.com/docs/en/cli-reference for available options - diff --git a/.github/workflows/claude.yml b/.github/workflows/claude.yml index d300267f1..9471a0591 100644 --- a/.github/workflows/claude.yml +++ b/.github/workflows/claude.yml @@ -47,4 +47,3 @@ jobs: # See https://github.com/anthropics/claude-code-action/blob/main/docs/usage.md # or https://code.claude.com/docs/en/cli-reference for available options # claude_args: '--allowed-tools Bash(gh pr:*)' - diff --git a/CLAUDE.md b/CLAUDE.md new file mode 120000 index 000000000..47dc3e3d8 --- /dev/null +++ b/CLAUDE.md @@ -0,0 +1 @@ +AGENTS.md \ No newline at end of file -- cgit v1.3.1 From 1efe4cd0e84e965db7c5056f4339c83102e997ab Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 5 Mar 2026 10:01:40 +0700 Subject: add hs_phy_type parameter to dwc2_phy_deinit for selective PHY deinitialization across all MCUs --- src/portable/synopsys/dwc2/dwc2_at32.h | 3 ++- src/portable/synopsys/dwc2/dwc2_bcm.h | 3 ++- src/portable/synopsys/dwc2/dwc2_common.c | 4 +++- src/portable/synopsys/dwc2/dwc2_common.h | 2 +- src/portable/synopsys/dwc2/dwc2_efm32.h | 4 ++-- src/portable/synopsys/dwc2/dwc2_esp32.h | 3 ++- src/portable/synopsys/dwc2/dwc2_gd32.h | 3 ++- src/portable/synopsys/dwc2/dwc2_nrf.h | 3 ++- src/portable/synopsys/dwc2/dwc2_stm32.h | 24 +++++++++++++----------- src/portable/synopsys/dwc2/dwc2_xmc.h | 4 ++-- 10 files changed, 31 insertions(+), 22 deletions(-) diff --git a/src/portable/synopsys/dwc2/dwc2_at32.h b/src/portable/synopsys/dwc2/dwc2_at32.h index 95ee8a8e1..fa6d10c12 100644 --- a/src/portable/synopsys/dwc2/dwc2_at32.h +++ b/src/portable/synopsys/dwc2/dwc2_at32.h @@ -113,7 +113,8 @@ TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t *dwc2, uint8_ } // MCU specific PHY deinit, disable PHY power -TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_deinit(dwc2_regs_t *dwc2) { +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_deinit(dwc2_regs_t *dwc2, uint8_t hs_phy_type) { + (void) hs_phy_type; dwc2->stm32_gccfg &= ~(STM32_GCCFG_PWRDWN | STM32_GCCFG_DCDEN | STM32_GCCFG_PDEN); } diff --git a/src/portable/synopsys/dwc2/dwc2_bcm.h b/src/portable/synopsys/dwc2/dwc2_bcm.h index 852db15e5..00842bba2 100644 --- a/src/portable/synopsys/dwc2/dwc2_bcm.h +++ b/src/portable/synopsys/dwc2/dwc2_bcm.h @@ -74,8 +74,9 @@ static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) } // MCU specific PHY deinit, disable PHY power -static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2) { +static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2, uint8_t hs_phy_type) { (void) dwc2; + (void) hs_phy_type; // nothing to do } diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 4e8e1ff04..33eabaeab 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -256,7 +256,9 @@ void dwc2_core_deinit(uint8_t rhport) { dwc2->pcgcctl |= PCGCCTL_STOPPCLK | PCGCCTL_GATEHCLK; // MCU-specific PHY deinit (disable PHY power) - dwc2_phy_deinit(dwc2); + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; + const uint8_t hs_phy_type = (dwc2->gusbcfg & GUSBCFG_PHYSEL) ? GHWCFG2_HSPHY_NOT_SUPPORTED : ghwcfg2.hs_phy_type; + dwc2_phy_deinit(dwc2, hs_phy_type); } // void dwc2_core_handle_common_irq(uint8_t rhport, bool in_isr) { diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index ac97ab3d5..9f28ab2e0 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -42,7 +42,7 @@ // - _dwc2_controller[]: array of controllers // - DWC2_EP_MAX: largest EP counts of all controllers // - dwc2_phy_init/dwc2_phy_update: phy init called before and after core reset -// - dwc2_phy_deinit: phy deinit to disable PHY power +// - dwc2_phy_deinit(dwc2, hs_phy_type): phy deinit to disable PHY power, only deinit the phy used by core // - dwc2_dcd_int_enable/dwc2_dcd_int_disable // - dwc2_remote_wakeup_delay diff --git a/src/portable/synopsys/dwc2/dwc2_efm32.h b/src/portable/synopsys/dwc2/dwc2_efm32.h index f808b567c..e1cb7c769 100644 --- a/src/portable/synopsys/dwc2/dwc2_efm32.h +++ b/src/portable/synopsys/dwc2/dwc2_efm32.h @@ -73,9 +73,9 @@ static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) } // MCU specific PHY deinit, disable PHY power -static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2) { +static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2, uint8_t hs_phy_type) { (void) dwc2; - + (void) hs_phy_type; // Disable PHY pin USB->ROUTE = 0; } diff --git a/src/portable/synopsys/dwc2/dwc2_esp32.h b/src/portable/synopsys/dwc2/dwc2_esp32.h index f4fa0bf8b..ff9f216bd 100644 --- a/src/portable/synopsys/dwc2/dwc2_esp32.h +++ b/src/portable/synopsys/dwc2/dwc2_esp32.h @@ -122,8 +122,9 @@ TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_ } // MCU specific PHY deinit, disable PHY power -TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_deinit(dwc2_regs_t* dwc2) { +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_deinit(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { (void)dwc2; + (void)hs_phy_type; // PHY managed by ESP-IDF } diff --git a/src/portable/synopsys/dwc2/dwc2_gd32.h b/src/portable/synopsys/dwc2/dwc2_gd32.h index 26b924161..ccbf93a76 100644 --- a/src/portable/synopsys/dwc2/dwc2_gd32.h +++ b/src/portable/synopsys/dwc2/dwc2_gd32.h @@ -86,8 +86,9 @@ static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) } // MCU specific PHY deinit, disable PHY power -static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2) { +static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2, uint8_t hs_phy_type) { (void) dwc2; + (void) hs_phy_type; // nothing to do } diff --git a/src/portable/synopsys/dwc2/dwc2_nrf.h b/src/portable/synopsys/dwc2/dwc2_nrf.h index 17d21518b..51f2d684f 100644 --- a/src/portable/synopsys/dwc2/dwc2_nrf.h +++ b/src/portable/synopsys/dwc2/dwc2_nrf.h @@ -53,8 +53,9 @@ TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_ } // MCU specific PHY deinit, disable PHY power -TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_deinit(dwc2_regs_t* dwc2) { +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_deinit(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { (void)dwc2; + (void)hs_phy_type; } // MCU specific PHY update, it is called AFTER init() and core reset diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index cc972e957..259ad21b9 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -265,17 +265,19 @@ static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { } // MCU specific PHY deinit, disable PHY power -static inline void dwc2_phy_deinit(dwc2_regs_t* dwc2) { - // Disable on-chip FS PHY - dwc2->stm32_gccfg &= ~STM32_GCCFG_PWRDWN; - - // Disable HS PHY if present - #ifdef USB_HS_PHYC - dwc2->stm32_gccfg &= ~STM32_GCCFG_PHYHSEN; - // Disable PLL and LDO - USB_HS_PHYC->USB_HS_PHYC_PLL &= ~USB_HS_PHYC_PLL_PLLEN; - USB_HS_PHYC->USB_HS_PHYC_LDO &= ~USB_HS_PHYC_LDO_ENABLE; - #endif +static inline void dwc2_phy_deinit(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { + if (hs_phy_type == GHWCFG2_HSPHY_NOT_SUPPORTED) { + // Disable on-chip FS PHY + dwc2->stm32_gccfg &= ~STM32_GCCFG_PWRDWN; + } else { + // Disable HS PHY + #ifdef USB_HS_PHYC + dwc2->stm32_gccfg &= ~STM32_GCCFG_PHYHSEN; + // Disable PLL and LDO + USB_HS_PHYC->USB_HS_PHYC_PLL &= ~USB_HS_PHYC_PLL_PLLEN; + USB_HS_PHYC->USB_HS_PHYC_LDO &= ~USB_HS_PHYC_LDO_ENABLE; + #endif + } } // MCU specific PHY update, it is called AFTER init() and core reset diff --git a/src/portable/synopsys/dwc2/dwc2_xmc.h b/src/portable/synopsys/dwc2/dwc2_xmc.h index e38935e9c..aca3873df 100644 --- a/src/portable/synopsys/dwc2/dwc2_xmc.h +++ b/src/portable/synopsys/dwc2/dwc2_xmc.h @@ -72,9 +72,9 @@ static inline void dwc2_phy_init(dwc2_regs_t * dwc2, uint8_t hs_phy_type) } // MCU specific PHY deinit, disable PHY power -static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2) { +static inline void dwc2_phy_deinit(dwc2_regs_t * dwc2, uint8_t hs_phy_type) { (void) dwc2; - + (void) hs_phy_type; // nothing to do } -- cgit v1.3.1 From 07620c125ba2090b7f1983ba39a9655cde194c6d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 4 Mar 2026 17:59:19 +0700 Subject: esp32p4 min rev 0.1 --- hw/bsp/espressif/boards/espressif_p4_function_ev/board.cmake | 1 + hw/bsp/espressif/boards/espressif_p4_function_ev/sdkconfig.defaults | 2 ++ test/hil/tinyusb.json | 2 +- 3 files changed, 4 insertions(+), 1 deletion(-) create mode 100644 hw/bsp/espressif/boards/espressif_p4_function_ev/sdkconfig.defaults diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.cmake b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.cmake index fe4db4fc1..455ca90a1 100644 --- a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.cmake +++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.cmake @@ -1,2 +1,3 @@ # Apply board specific content here set(IDF_TARGET "esp32p4") +list(APPEND SDKCONFIG_DEFAULTS "${CMAKE_CURRENT_LIST_DIR}/sdkconfig.defaults") diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/sdkconfig.defaults b/hw/bsp/espressif/boards/espressif_p4_function_ev/sdkconfig.defaults new file mode 100644 index 000000000..6b0a548f6 --- /dev/null +++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/sdkconfig.defaults @@ -0,0 +1,2 @@ +CONFIG_ESP32P4_SELECTS_REV_LESS_V3=y +CONFIG_ESP32P4_REV_MIN_1=y diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 4d7276c8f..029e5ffcd 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -13,7 +13,7 @@ "flasher": { "name": "esptool", "uid": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", - "args": "-b 1500000 --force", + "args": "-b 1500000", "comment": "use --force for ESP32-P4 v0.1" }, "comment": "Use TS3USB30 mux to test both device and host" -- cgit v1.3.1 From faa89ef3b648a4d71ff92371ca506ff1254bebd6 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 5 Mar 2026 12:13:01 +0700 Subject: fix hse value for stm32f411blackpill --- .../boards/feather_stm32f405/stm32f4xx_hal_conf.h | 491 -------------------- .../stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h | 491 -------------------- .../boards/stm32f401blackpill/stm32f4xx_hal_conf.h | 493 --------------------- .../boards/stm32f407blackvet/stm32f4xx_hal_conf.h | 493 --------------------- .../boards/stm32f407disco/stm32f4xx_hal_conf.h | 493 --------------------- .../stm32f4/boards/stm32f411blackpill/board.cmake | 1 + hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk | 2 +- .../boards/stm32f411blackpill/stm32f4xx_hal_conf.h | 493 --------------------- .../boards/stm32f411disco/stm32f4xx_hal_conf.h | 493 --------------------- .../boards/stm32f412disco/stm32f4xx_hal_conf.h | 493 --------------------- .../boards/stm32f412nucleo/stm32f4xx_hal_conf.h | 493 --------------------- .../boards/stm32f439nucleo/stm32f4xx_hal_conf.h | 486 -------------------- hw/bsp/stm32f4/family.mk | 1 + 13 files changed, 3 insertions(+), 4920 deletions(-) delete mode 100644 hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h delete mode 100644 hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h delete mode 100644 hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h delete mode 100644 hw/bsp/stm32f4/boards/stm32f407blackvet/stm32f4xx_hal_conf.h delete mode 100644 hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h delete mode 100644 hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h delete mode 100644 hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h delete mode 100644 hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h delete mode 100644 hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h delete mode 100644 hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h deleted file mode 100644 index b892df3b6..000000000 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,491 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf.h - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2019 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED - -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -/* Copied over manually- STM32Cube didn't generate these for some reason. */ -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) - -#define PHY_READ_TO ((uint32_t)0x0000FFFFU) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h deleted file mode 100644 index b892df3b6..000000000 --- a/hw/bsp/stm32f4/boards/pyboardv11/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,491 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf.h - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2019 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED - -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_PCD_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -/* Copied over manually- STM32Cube didn't generate these for some reason. */ -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) - -#define PHY_READ_TO ((uint32_t)0x0000FFFFU) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h deleted file mode 100644 index 16f081cfb..000000000 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f407blackvet/stm32f4xx_hal_conf.h deleted file mode 100644 index e24e782ea..000000000 --- a/hw/bsp/stm32f4/boards/stm32f407blackvet/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h deleted file mode 100644 index e24e782ea..000000000 --- a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake index d16db508f..f54807c2a 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake @@ -6,5 +6,6 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F411CEUx_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F411xE + HSE_VALUE=25000000 ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk index 7af7ca47c..c45aba79b 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk @@ -1,4 +1,4 @@ -CFLAGS += -DSTM32F411xE +CFLAGS += -DSTM32F411xE -DHSE_VALUE=25000000 # GCC SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h deleted file mode 100644 index 16f081cfb..000000000 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h deleted file mode 100644 index e24e782ea..000000000 --- a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h deleted file mode 100644 index e24e782ea..000000000 --- a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h deleted file mode 100644 index e24e782ea..000000000 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,493 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h deleted file mode 100644 index 7bbd6b54f..000000000 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h +++ /dev/null @@ -1,486 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @brief HAL configuration file - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -// #define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* LAN8742A_PHY_ADDRESS Address*/ -#define LAN8742A_PHY_ADDRESS 0U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -#define PHY_ISFR ((uint16_t)0x001DU) /*!< PHY Interrupt Source Flag register Offset */ -#define PHY_ISFR_INT4 ((uint16_t)0x000BU) /*!< PHY Link down inturrupt */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 0U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f4xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f4xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f4xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32f4xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32f4xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED - #include "stm32f4xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f4xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index c3c41dc3f..f3e74ecea 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -71,6 +71,7 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c INC += \ + $(TOP)/hw/bsp/stm32$(ST_FAMILY) \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ -- cgit v1.3.1 From 70c93adc2f6264015cae597a9abe58ad2e1aaee6 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 5 Mar 2026 17:51:57 +0700 Subject: improve threadx support, add multi ROTS support for board_test and msc_dual_lun --- AGENTS.md | 57 +++++++++++- examples/device/board_test/src/main.c | 80 +++++++++++++++- examples/device/msc_dual_lun/src/main.c | 160 ++++++++++++++++++++++++++------ hw/bsp/board.c | 55 +++++++++++ hw/bsp/family_support.cmake | 20 ++++ hw/bsp/stm32h7/family.c | 9 ++ src/osal/osal_threadx.h | 27 ++++-- tools/get_deps.py | 3 + 8 files changed, 370 insertions(+), 41 deletions(-) diff --git a/AGENTS.md b/AGENTS.md index b4f87e98c..34fc57cb8 100644 --- a/AGENTS.md +++ b/AGENTS.md @@ -114,13 +114,65 @@ Use `-DBOARD=...` with any supported board under `hw/bsp/espressif/boards/`. NEV - `cd examples/device/cdc_msc_freertos` - `idf.py -DBOARD=espressif_s3_devkitc monitor` -## J-Link GDB Server + RTT Logging +## GDB Debugging + +Look up the board's `JLINK_DEVICE` and `OPENOCD_OPTION` from `hw/bsp/*/boards/*/board.cmake` (or `board.mk`). + +### JLinkGDBServer + +**Terminal 1 – start the GDB server:** +```bash +JLinkGDBServer -device stm32h743xi -if SWD -speed 4000 \ + -port 2331 -swoport 2332 -telnetport 2333 -nogui +``` + +**Terminal 2 – connect GDB:** +```bash +arm-none-eabi-gdb /tmp/build/firmware.elf +(gdb) target remote :2331 +(gdb) monitor reset halt +(gdb) load +(gdb) continue +``` + +To break on entry instead of running immediately: +```bash +(gdb) monitor reset halt +(gdb) load +(gdb) break main +(gdb) continue +``` + +### OpenOCD + +**Terminal 1 – start the GDB server:** +```bash +openocd -f interface/stlink.cfg -f target/stm32h7x.cfg +# or with J-Link probe: +openocd -f interface/jlink.cfg -f target/stm32h7x.cfg +``` + +For boards that define `OPENOCD_OPTION` in `board.cmake`, use those options directly: +```bash +openocd $(cat hw/bsp/FAMILY/boards/BOARD/board.cmake | grep OPENOCD_OPTION | ...) +``` + +**Terminal 2 – connect GDB (OpenOCD default port is 3333):** +```bash +arm-none-eabi-gdb /tmp/build/firmware.elf +(gdb) target remote :3333 +(gdb) monitor reset halt +(gdb) load +(gdb) continue +``` + +### RTT Logging with JLinkGDBServer - Build with RTT logging enabled (example): `cd examples/device/cdc_msc && make BOARD=stm32h743eval LOG=2 LOGGER=rtt all` - Flash with J-Link: `cd examples/device/cdc_msc && make BOARD=stm32h743eval LOG=2 LOGGER=rtt flash-jlink` -- Launch GDB server (keep this running in terminal 1): +- Launch GDB server with RTT port (keep this running in terminal 1): `JLinkGDBServer -device stm32h743xi -if SWD -speed 4000 -port 2331 -swoport 2332 -telnetport 2333 -RTTTelnetPort 19021 -nogui` - Read RTT output (terminal 2): `JLinkRTTClient` @@ -128,7 +180,6 @@ Use `-DBOARD=...` with any supported board under `hw/bsp/espressif/boards/`. NEV `JLinkRTTClient | tee rtt.log` - For non-interactive capture: `timeout 20s JLinkRTTClient > rtt.log` -- Use the board-specific `JLINK_DEVICE` from `hw/bsp/*/boards/*/board.mk` if you are not using `stm32h743eval`. ## Unit Testing diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 757876ac8..ddc9bba6b 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -39,10 +39,7 @@ enum { #define HELLO_STR "Hello from TinyUSB\r\n" -int main(void) { - board_init(); - board_led_write(true); - +static void board_test_loop(void) { uint32_t start_ms = 0; bool led_state = false; @@ -76,8 +73,83 @@ int main(void) { } } +#if CFG_TUSB_OS == OPT_OS_FREERTOS +static void freertos_init(void); +#endif + +int main(void) { + board_init(); + board_led_write(true); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + freertos_init(); +#elif CFG_TUSB_OS == OPT_OS_THREADX + tx_kernel_enter(); +#else + board_test_loop(); +#endif + + return 0; +} + #ifdef ESP_PLATFORM void app_main(void) { main(); } #endif + +//--------------------------------------------------------------------+ +// FreeRTOS +//--------------------------------------------------------------------+ +#if CFG_TUSB_OS == OPT_OS_FREERTOS + +#ifdef ESP_PLATFORM +#define MAIN_STACK_SIZE 4096 +#else +#define MAIN_STACK_SIZE configMINIMAL_STACK_SIZE +#endif + +#if configSUPPORT_STATIC_ALLOCATION +static StackType_t _main_stack[MAIN_STACK_SIZE]; +static StaticTask_t _main_taskdef; +#endif + +static void board_test_task(void* param) { + (void) param; + board_test_loop(); +} + +static void freertos_init(void) { + #if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(board_test_task, "main", MAIN_STACK_SIZE, NULL, 1, _main_stack, &_main_taskdef); + #else + xTaskCreate(board_test_task, "main", MAIN_STACK_SIZE, NULL, 1, NULL); + #endif + #ifndef ESP_PLATFORM + vTaskStartScheduler(); + #endif +} + +//--------------------------------------------------------------------+ +// ThreadX +//--------------------------------------------------------------------+ +#elif CFG_TUSB_OS == OPT_OS_THREADX + +#define MAIN_TASK_STACK_SIZE 1024 +static TX_THREAD _main_thread; +static ULONG _main_thread_stack[MAIN_TASK_STACK_SIZE / sizeof(ULONG)]; +static void main_thread_entry(ULONG arg); + +static void main_thread_entry(ULONG arg) { + (void) arg; + board_test_loop(); +} + +void tx_application_define(void *first_unused_memory) { + (void) first_unused_memory; + static CHAR main_thread_name[] = "main"; + tx_thread_create(&_main_thread, main_thread_name, main_thread_entry, 0, + _main_thread_stack, MAIN_TASK_STACK_SIZE, + 1, 1, TX_NO_TIME_SLICE, TX_AUTO_START); +} +#endif diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index b459871f7..9ca3a1f34 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" //--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF PROTYPES +// MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ /* Blink pattern @@ -41,71 +41,179 @@ */ enum { BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; -void led_blinking_task(void); +// Task parameter type: ULONG for ThreadX, void* for FreeRTOS and noos +#if CFG_TUSB_OS == OPT_OS_THREADX + #define RTOS_PARAM ULONG +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + #define RTOS_PARAM void* + static void freertos_init(void); +#else + #define RTOS_PARAM void* +#endif -/*------------- MAIN -------------*/ -int main(void) { - board_init(); +void led_blinking_task(RTOS_PARAM param); - // init device stack on configured roothub port +//--------------------------------------------------------------------+ +// USB Device Task +//--------------------------------------------------------------------+ +static void usb_device_init(void) { tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, + .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUD_RHPORT, &dev_init); - board_init_after_tusb(); +} + +#if CFG_TUSB_OS != OPT_OS_NONE && CFG_TUSB_OS != OPT_OS_PICO +static void usb_device_task(RTOS_PARAM param) { + (void) param; + usb_device_init(); while (1) { - tud_task(); // tinyusb device task - led_blinking_task(); + tud_task(); } } +#endif //--------------------------------------------------------------------+ -// Device callbacks +// Main //--------------------------------------------------------------------+ +int main(void) { + board_init(); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + freertos_init(); + +#elif CFG_TUSB_OS == OPT_OS_THREADX + tx_kernel_enter(); + +#else + // noos + pico-sdk: init USB then run polling loop + usb_device_init(); -// Invoked when device is mounted + while (1) { + tud_task(); + led_blinking_task(NULL); + } +#endif + + return 0; +} + +#ifdef ESP_PLATFORM +void app_main(void) { + main(); +} +#endif + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } -// Invoked when device is unmounted void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } -// Invoked when usb bus is suspended -// remote_wakeup_en : if host allow us to perform remote wakeup -// Within 7ms, device must draw an average of current less than 2.5 mA from bus void tud_suspend_cb(bool remote_wakeup_en) { (void) remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } -// Invoked when usb bus is resumed void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } //--------------------------------------------------------------------+ -// BLINKING TASK +// Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) { +void led_blinking_task(RTOS_PARAM param) { + (void) param; static uint32_t start_ms = 0; static bool led_state = false; - // Blink every interval ms - if (tusb_time_millis_api() - start_ms < blink_interval_ms) return; // not enough time - start_ms += blink_interval_ms; + while (1) { +#if CFG_TUSB_OS == OPT_OS_FREERTOS + vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); +#elif CFG_TUSB_OS == OPT_OS_THREADX + tx_thread_sleep(_osal_ms2tick(blink_interval_ms)); +#else + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { + return; // not enough time + } +#endif + + start_ms += blink_interval_ms; + board_led_write(led_state); + led_state = 1 - led_state; // toggle + } +} + +//--------------------------------------------------------------------+ +// FreeRTOS +//--------------------------------------------------------------------+ +#if CFG_TUSB_OS == OPT_OS_FREERTOS + +#ifdef ESP_PLATFORM +#define USBD_STACK_SIZE 4096 +#else +#define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2 * (CFG_TUSB_DEBUG ? 2 : 1)) +#endif +#define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE + +#if configSUPPORT_STATIC_ALLOCATION +static StackType_t _usb_device_stack[USBD_STACK_SIZE]; +static StaticTask_t _usb_device_taskdef; +static StackType_t _blinky_stack[BLINKY_STACK_SIZE]; +static StaticTask_t _blinky_taskdef; +#endif + + +static void freertos_init(void) { + #if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, _usb_device_stack, &_usb_device_taskdef); + xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, _blinky_stack, &_blinky_taskdef); + #else + xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, NULL); + #endif + #ifndef ESP_PLATFORM + vTaskStartScheduler(); + #endif +} - board_led_write(led_state); - led_state = 1 - led_state; // toggle +//--------------------------------------------------------------------+ +// ThreadX +//--------------------------------------------------------------------+ +#elif CFG_TUSB_OS == OPT_OS_THREADX + +#define USBD_STACK_SIZE 4096 +#define BLINKY_STACK_SIZE 1024 + +static TX_THREAD _usb_device_thread; +static ULONG _usb_device_stack[USBD_STACK_SIZE / sizeof(ULONG)]; +static TX_THREAD _blinky_thread; +static ULONG _blinky_stack[BLINKY_STACK_SIZE / sizeof(ULONG)]; + +void tx_application_define(void *first_unused_memory) { + (void) first_unused_memory; + static CHAR usbd_name[] = "usbd"; + static CHAR blinky_name[] = "blinky"; + tx_thread_create(&_usb_device_thread, usbd_name, usb_device_task, 0, + _usb_device_stack, USBD_STACK_SIZE, + 0, 0, TX_NO_TIME_SLICE, TX_AUTO_START); + tx_thread_create(&_blinky_thread, blinky_name, led_blinking_task, 0, + _blinky_stack, BLINKY_STACK_SIZE, + 1, 1, TX_NO_TIME_SLICE, TX_AUTO_START); } + +#endif diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 91e7de9fe..0553a7eb7 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -251,3 +251,58 @@ void vApplicationSetupTimerInterrupt(void) { #endif #endif + +//-------------------------------------------------------------------- +// ThreadX hooks for ARM Cortex-M +//-------------------------------------------------------------------- +#if CFG_TUSB_OS == OPT_OS_THREADX && defined(__ARM_ARCH) + +#include "tx_api.h" +#include "tx_initialize.h" + +// Newlib linker symbol: end of statically allocated RAM (start of heap) +extern ULONG _end; + +// CMSIS standard variable for system clock frequency +extern uint32_t SystemCoreClock; + +// Cortex-M SysTick registers (fixed addresses on all Cortex-M) +#define _TX_SYST_CSR (*((volatile uint32_t *)0xE000E010U)) +#define _TX_SYST_RVR (*((volatile uint32_t *)0xE000E014U)) +#define _TX_SYST_CVR (*((volatile uint32_t *)0xE000E018U)) +// SCB->SHP[10] = PendSV priority, [11] = SysTick priority (byte access at SCB base + 0xD22) +#define _TX_SCB_SHPR3 (*((volatile uint32_t *)0xE000ED20U)) + +VOID _tx_initialize_low_level(VOID) { + // Set the first available memory address for tx_application_define + _tx_initialize_unused_memory = (VOID *)(&_end); + + // Configure SysTick for ThreadX tick rate: enable with processor clock + interrupt + _TX_SYST_RVR = (SystemCoreClock / TX_TIMER_TICKS_PER_SECOND) - 1u; + _TX_SYST_CVR = 0u; + _TX_SYST_CSR = 0x07u; // CLKSOURCE=1, TICKINT=1, ENABLE=1 + + // SHPR3 bits[31:24] = SysTick priority, bits[23:16] = PendSV priority + // PendSV must be lowest priority (0xFF). SysTick must be higher than PendSV (0x40) + // so SysTick can preempt the PendSV scheduler idle loop (__tx_ts_wait) to tick the timer. + _TX_SCB_SHPR3 = (_TX_SCB_SHPR3 & 0x0000FFFFU) | 0x40FF0000U; +} + +// Weak callback for board-specific SysTick work (e.g. HAL_IncTick on STM32) +void osal_threadx_tick_cb(void); +TU_ATTR_WEAK void osal_threadx_tick_cb(void) { } + +// SysTick drives the ThreadX timer tick +extern void _tx_timer_interrupt(void); +void SysTick_Handler(void); +void SysTick_Handler(void) { + osal_threadx_tick_cb(); + _tx_timer_interrupt(); +} + +// tusb_time_millis_api() based on ThreadX tick counter +uint32_t tusb_time_millis_api(void) { + return (uint32_t)((uint64_t) tx_time_get() * 1000u / TX_TIMER_TICKS_PER_SECOND); +} + +#endif diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 699afda92..4299ad44e 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -380,6 +380,26 @@ function(family_add_rtos TARGET RTOS) target_link_libraries(${TARGET} PUBLIC freertos_kernel) target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_FREERTOS) + elseif (RTOS STREQUAL "threadx") + if (NOT TARGET threadx) + # Derive THREADX_ARCH from CMAKE_SYSTEM_CPU if not explicitly set + if (NOT DEFINED THREADX_ARCH) + string(REPLACE "-" "_" THREADX_ARCH ${CMAKE_SYSTEM_CPU}) + endif () + # Derive THREADX_TOOLCHAIN from TOOLCHAIN if not explicitly set + if (NOT DEFINED THREADX_TOOLCHAIN) + if (TOOLCHAIN STREQUAL "iar") + set(THREADX_TOOLCHAIN "iar") + elseif (TOOLCHAIN STREQUAL "clang") + set(THREADX_TOOLCHAIN "ac6") + else () + set(THREADX_TOOLCHAIN "gnu") + endif () + endif () + add_subdirectory(${TOP}/lib/threadx ${CMAKE_BINARY_DIR}/lib/threadx) + endif () + target_link_libraries(${TARGET} PUBLIC threadx) + target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_THREADX) elseif (RTOS STREQUAL "zephyr") target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_ZEPHYR) target_include_directories(${TARGET} PUBLIC ${ZEPHYR_BASE}/include) diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 2759dac63..c94c2e755 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -139,6 +139,10 @@ void board_init(void) { #endif NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + +#elif CFG_TUSB_OS == OPT_OS_THREADX + // Disable SysTick before kernel entry; _tx_initialize_low_level() will re-configure it + SysTick->CTRL &= ~1UL; #endif GPIO_InitTypeDef GPIO_InitStruct; @@ -299,6 +303,11 @@ uint32_t tusb_time_millis_api(void) { return system_ticks; } +#elif CFG_TUSB_OS == OPT_OS_THREADX +// Keep HAL_GetTick() working for HAL functions called from board_init() +void osal_threadx_tick_cb(void) { + HAL_IncTick(); +} #endif void HardFault_Handler(void) { diff --git a/src/osal/osal_threadx.h b/src/osal/osal_threadx.h index 4f05ef535..6bcf9c5ab 100644 --- a/src/osal/osal_threadx.h +++ b/src/osal/osal_threadx.h @@ -39,18 +39,28 @@ extern "C" { //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline uint32_t _osal_ms2tick(uint32_t msec) { - if ( msec == TX_WAIT_FOREVER ) return TX_WAIT_FOREVER; - if ( msec == 0 ) return 0; + if ( msec == TX_WAIT_FOREVER ) { + return TX_WAIT_FOREVER; + } + if ( msec == 0 ) { + return 0; + } uint32_t ticks = msec * TX_TIMER_TICKS_PER_SECOND / 1000; // TX_TIMER_TICKS_PER_SECOND is less than 1000 and 1 tick > 1 ms // we still need to delay at least 1 tick - if ( ticks == 0 ) ticks = 1; + if ( ticks == 0 ) { + ticks = 1; + } return ticks; } +TU_ATTR_ALWAYS_INLINE static inline uint32_t osal_time_millis(void) { + return (uint32_t)((uint64_t) tx_time_get() * 1000u / TX_TIMER_TICKS_PER_SECOND); +} + TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { tx_thread_sleep(_osal_ms2tick(msec)); } @@ -94,7 +104,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, typedef TX_SEMAPHORE osal_semaphore_def_t, * osal_semaphore_t; TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t *semdef) { - tx_semaphore_create(semdef->semaphore, semdef->name, 0); + tx_semaphore_create(semdef, TX_NULL, 0); return semdef; } @@ -113,6 +123,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t se } TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t sem_hdl) { + (void) sem_hdl; } //--------------------------------------------------------------------+ @@ -152,10 +163,10 @@ typedef TX_QUEUE osal_queue_def_t, * osal_queue_t; #define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ static _type _name##_buf[_depth]; \ osal_queue_def_t _name = { \ - .tx_queue_name = #_name, \ + .tx_queue_name = (CHAR*)(uintptr_t)#_name, \ .tx_queue_message_size = (sizeof(_type) + 3) / 4, \ .tx_queue_capacity = _depth, \ - .tx_queue_start = _name##_buf } + .tx_queue_start = (ULONG *) _name##_buf } TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { @@ -173,8 +184,8 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, v return 0 == tx_queue_receive(qhdl, data, _osal_ms2tick(msec)); } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void *data, bool in_isr) { - return 0 == tx_queue_send(qhdl, data, in_isr ? TX_NO_WAIT : TX_WAIT_FOREVER); +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void const *data, bool in_isr) { + return 0 == tx_queue_send(qhdl, (VOID *)(uintptr_t) data, in_isr ? TX_NO_WAIT : TX_WAIT_FOREVER); } TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_empty(osal_queue_t qhdl) { diff --git a/tools/get_deps.py b/tools/get_deps.py index 1d596469b..696914251 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -14,6 +14,9 @@ deps_mandatory = { 'lib/lwip': ['https://github.com/lwip-tcpip/lwip.git', '159e31b689577dbf69cf0683bbaffbd71fa5ee10', 'all'], + 'lib/threadx': ['https://github.com/eclipse-threadx/threadx.git', + '4b6e8100d932a3a67b34c6eb17f84f3bffb9e2ae', + 'all'], 'tools/linkermap': ['https://github.com/hathach/linkermap.git', '8e1f440fa15c567aceb5aa0d14f6d18c329cc67f', 'all'], -- cgit v1.3.1 From 0c7a385cf873b9cbf93344187c033c176c37f7e2 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 5 Mar 2026 19:07:00 +0700 Subject: improve threadx support, add multi ROTS support for board_test and msc_dual_lun --- examples/device/board_test/src/main.c | 86 ++++++++++++++++++++------------- examples/device/msc_dual_lun/src/main.c | 2 +- hw/bsp/board.c | 5 -- hw/bsp/espressif/boards/family.c | 11 ----- hw/bsp/rp2040/family.c | 12 ----- 5 files changed, 54 insertions(+), 62 deletions(-) diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index ddc9bba6b..71e7e1da7 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -39,8 +39,35 @@ enum { #define HELLO_STR "Hello from TinyUSB\r\n" -static void board_test_loop(void) { +// board test example does not use both device and host stack +#if CFG_TUSB_OS != OPT_OS_NONE +uint32_t tusb_time_millis_api(void) { + return osal_time_millis(); +} + +void tusb_time_delay_ms_api(uint32_t ms) { + osal_task_delay(ms); +} +#endif + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +// Task parameter type: ULONG for ThreadX, void* for FreeRTOS and noos +#if CFG_TUSB_OS == OPT_OS_THREADX + #define RTOS_PARAM ULONG +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + #define RTOS_PARAM void* + static void freertos_init(void); +#else + #define RTOS_PARAM void* +#endif + +static void board_test_loop(RTOS_PARAM param) { + (void) param; uint32_t start_ms = 0; + (void) start_ms; bool led_state = false; while (1) { @@ -55,28 +82,31 @@ static void board_test_loop(void) { } // Blink and print every interval ms - if (!(tusb_time_millis_api() - start_ms < interval_ms)) { - start_ms = tusb_time_millis_api(); - - if (ch < 0) { - // skip if echoing - printf(HELLO_STR); + #if CFG_TUSB_OS == OPT_OS_FREERTOS + vTaskDelay(interval_ms / portTICK_PERIOD_MS); + #elif CFG_TUSB_OS == OPT_OS_THREADX + tx_thread_sleep(_osal_ms2tick(interval_ms)); + #else + if (tusb_time_millis_api() - start_ms < interval_ms) { + continue; // not enough time + } + #endif + start_ms = tusb_time_millis_api(); - #ifndef LOGGER_UART - board_uart_write(HELLO_STR, sizeof(HELLO_STR)-1); - #endif - } + if (ch < 0) { + // skip if echoing + printf(HELLO_STR); - board_led_write(led_state); - led_state = !led_state; // toggle + #ifndef LOGGER_UART + board_uart_write(HELLO_STR, sizeof(HELLO_STR)-1); + #endif } + + board_led_write(led_state); + led_state = !led_state; // toggle } } -#if CFG_TUSB_OS == OPT_OS_FREERTOS -static void freertos_init(void); -#endif - int main(void) { board_init(); board_led_write(true); @@ -86,7 +116,7 @@ int main(void) { #elif CFG_TUSB_OS == OPT_OS_THREADX tx_kernel_enter(); #else - board_test_loop(); + board_test_loop(NULL); #endif return 0; @@ -106,7 +136,7 @@ void app_main(void) { #ifdef ESP_PLATFORM #define MAIN_STACK_SIZE 4096 #else -#define MAIN_STACK_SIZE configMINIMAL_STACK_SIZE +#define MAIN_STACK_SIZE 512 #endif #if configSUPPORT_STATIC_ALLOCATION @@ -114,17 +144,13 @@ static StackType_t _main_stack[MAIN_STACK_SIZE]; static StaticTask_t _main_taskdef; #endif -static void board_test_task(void* param) { - (void) param; - board_test_loop(); -} - static void freertos_init(void) { #if configSUPPORT_STATIC_ALLOCATION - xTaskCreateStatic(board_test_task, "main", MAIN_STACK_SIZE, NULL, 1, _main_stack, &_main_taskdef); + xTaskCreateStatic(board_test_loop, "main", MAIN_STACK_SIZE, NULL, 1, _main_stack, &_main_taskdef); #else - xTaskCreate(board_test_task, "main", MAIN_STACK_SIZE, NULL, 1, NULL); + xTaskCreate(board_test_loop, "main", MAIN_STACK_SIZE, NULL, 1, NULL); #endif + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif @@ -138,17 +164,11 @@ static void freertos_init(void) { #define MAIN_TASK_STACK_SIZE 1024 static TX_THREAD _main_thread; static ULONG _main_thread_stack[MAIN_TASK_STACK_SIZE / sizeof(ULONG)]; -static void main_thread_entry(ULONG arg); - -static void main_thread_entry(ULONG arg) { - (void) arg; - board_test_loop(); -} void tx_application_define(void *first_unused_memory) { (void) first_unused_memory; static CHAR main_thread_name[] = "main"; - tx_thread_create(&_main_thread, main_thread_name, main_thread_entry, 0, + tx_thread_create(&_main_thread, main_thread_name, board_test_loop, 0, _main_thread_stack, MAIN_TASK_STACK_SIZE, 1, 1, TX_NO_TIME_SLICE, TX_AUTO_START); } diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index 9ca3a1f34..74a60aa6b 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -197,7 +197,7 @@ static void freertos_init(void) { #elif CFG_TUSB_OS == OPT_OS_THREADX #define USBD_STACK_SIZE 4096 -#define BLINKY_STACK_SIZE 1024 +#define BLINKY_STACK_SIZE 512 static TX_THREAD _usb_device_thread; static ULONG _usb_device_stack[USBD_STACK_SIZE / sizeof(ULONG)]; diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 0553a7eb7..71c209950 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -300,9 +300,4 @@ void SysTick_Handler(void) { _tx_timer_interrupt(); } -// tusb_time_millis_api() based on ThreadX tick counter -uint32_t tusb_time_millis_api(void) { - return (uint32_t)((uint64_t) tx_time_get() * 1000u / TX_TIMER_TICKS_PER_SECOND); -} - #endif diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 2fad7feec..04d8a4001 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -364,14 +364,3 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx return true; } #endif - -// board test example does not use both device and host stack -#if !CFG_TUD_ENABLED && !CFG_TUH_ENABLED -TU_ATTR_WEAK uint32_t tusb_time_millis_api(void) { - return osal_time_millis(); -} - -TU_ATTR_WEAK void tusb_time_delay_ms_api(uint32_t ms) { - osal_task_delay(ms); -} -#endif diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index d68b13dd1..a51b3f758 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -377,15 +377,3 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx } #endif - - -// board test example does not use both device and host stack -#if !CFG_TUD_ENABLED && !CFG_TUH_ENABLED -TU_ATTR_WEAK uint32_t tusb_time_millis_api(void) { - return osal_time_millis(); -} - -TU_ATTR_WEAK void tusb_time_delay_ms_api(uint32_t ms) { - osal_task_delay(ms); -} -#endif -- cgit v1.3.1 From ce8a77083dc00423b2c1a4c7657aa7290684dea6 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 5 Mar 2026 20:59:26 +0700 Subject: ci: fix claude-code-review for fork PRs Switch pull_request to pull_request_target so secrets and OIDC tokens are available when reviewing PRs from forks. Also add pull-requests: write permission so the action can post review comments. Co-Authored-By: Claude Sonnet 4.6 --- .github/workflows/claude-code-review.yml | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/.github/workflows/claude-code-review.yml b/.github/workflows/claude-code-review.yml index 25f4ad18c..5ba2fe900 100644 --- a/.github/workflows/claude-code-review.yml +++ b/.github/workflows/claude-code-review.yml @@ -1,27 +1,15 @@ name: Claude Code Review on: - pull_request: + pull_request_target: types: [opened, synchronize, ready_for_review, reopened] - # Optional: Only run on specific file changes - # paths: - # - "src/**/*.ts" - # - "src/**/*.tsx" - # - "src/**/*.js" - # - "src/**/*.jsx" jobs: claude-review: - # Optional: Filter by PR author - # if: | - # github.event.pull_request.user.login == 'external-contributor' || - # github.event.pull_request.user.login == 'new-developer' || - # github.event.pull_request.author_association == 'FIRST_TIME_CONTRIBUTOR' - runs-on: ubuntu-latest permissions: contents: read - pull-requests: read + pull-requests: write issues: read id-token: write -- cgit v1.3.1 From 7088dc528bd5a89a77e06798d8b5384962748828 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Wed, 3 Dec 2025 16:26:56 +0100 Subject: ci_hs: add deinit support Signed-off-by: Zixun LI --- examples/dual/dynamic_switch/only.txt | 2 ++ hw/bsp/lpc43/family.c | 2 ++ src/portable/chipidea/ci_hs/dcd_ci_hs.c | 17 +++++++++++++++++ src/portable/chipidea/ci_hs/hcd_ci_hs.c | 12 ++++++++---- src/portable/ehci/ehci.c | 11 ++++++++--- src/portable/ehci/ehci_api.h | 3 +++ 6 files changed, 40 insertions(+), 7 deletions(-) diff --git a/examples/dual/dynamic_switch/only.txt b/examples/dual/dynamic_switch/only.txt index 8508780e6..70be49b28 100644 --- a/examples/dual/dynamic_switch/only.txt +++ b/examples/dual/dynamic_switch/only.txt @@ -1,4 +1,6 @@ family:espressif +mcu:LPC43XX +mcu:MIMXRT1XXX mcu:STM32C0 mcu:STM32G0 mcu:STM32H5 diff --git a/hw/bsp/lpc43/family.c b/hw/bsp/lpc43/family.c index bade53b07..56834a1b0 100644 --- a/hw/bsp/lpc43/family.c +++ b/hw/bsp/lpc43/family.c @@ -185,8 +185,10 @@ void board_init(void) */ Chip_USB1_Init(); +#ifdef _BOARD_EA4357_H // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7); +#endif #if defined(BOARD_TUD_RHPORT) && BOARD_TUD_RHPORT == 0 // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 2bba32ada..b9f6a8a7b 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -285,6 +285,23 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t *rh_init) { return true; } +bool dcd_deinit(uint8_t rhport) { + ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); + + // disable all interrupt + dcd_reg->USBINTR = 0; + + // unattach from bus + dcd_reg->USBCMD &= ~USBCMD_RUN_STOP; + + // flush all endpoints + while (dcd_reg->ENDPTPRIME) {} + dcd_reg->ENDPTFLUSH = 0xFFFFFFFF; + while (dcd_reg->ENDPTFLUSH) {} + + return true; +} + void dcd_int_enable(uint8_t rhport) { CI_DCD_INT_ENABLE(rhport); } diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 29ce0cd7f..91adc06b1 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -93,14 +93,14 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t *rh_init) { hcd_reg->USBCMD |= USBCMD_RESET; while (hcd_reg->USBCMD & USBCMD_RESET) {} - // Set mode to device, must be set immediately after reset + // Set mode to host, must be set immediately after reset #if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX // LPC18XX/43XX need to set VBUS Power Select to HIGH // RHPORT1 is fullspeed only (need external PHY for Highspeed) hcd_reg->USBMODE = USBMODE_CM_HOST | USBMODE_VBUS_POWER_SELECT; - if (rhport == 1) { - hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; - } + #if !TUH_OPT_HIGH_SPEED + hcd_reg->PORTSC1 = PORTSC1_FORCE_FULL_SPEED; + #endif #else hcd_reg->USBMODE = USBMODE_CM_HOST; #endif @@ -108,6 +108,10 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t *rh_init) { return ehci_init(rhport, (uint32_t)&hcd_reg->CAPLENGTH, (uint32_t)&hcd_reg->USBCMD); } +bool hcd_deinit(uint8_t rhport) { + return ehci_deinit(rhport); +} + void hcd_int_enable(uint8_t rhport) { CI_HCD_INT_ENABLE(rhport); } diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 9b2cf98be..03c3b91fd 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -411,17 +411,22 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) return true; } -#if 0 -static void ehci_stop(uint8_t rhport) { +bool ehci_deinit(uint8_t rhport) { (void) rhport; ehci_registers_t* regs = ehci_data.regs; + + // Disable all the interrupt + regs->inten = 0; + + // Disable schedules regs->command_bm.run_stop = 0; // USB Spec: controller has to stop within 16 uframe = 2 frames while( regs->status_bm.hc_halted == 0 ) {} + + return true; } -#endif //--------------------------------------------------------------------+ // Endpoint API diff --git a/src/portable/ehci/ehci_api.h b/src/portable/ehci/ehci_api.h index 79fbe702a..e9018639f 100644 --- a/src/portable/ehci/ehci_api.h +++ b/src/portable/ehci/ehci_api.h @@ -38,6 +38,9 @@ // Initialize EHCI driver bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg); +// De-initialize EHCI driver +bool ehci_deinit(uint8_t rhport); + #ifdef __cplusplus } #endif -- cgit v1.3.1 From 4ed45cf9bc866750492210b0a14bf751d43421ab Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Thu, 5 Mar 2026 16:23:24 +0100 Subject: update PORTSC1 Signed-off-by: Zixun LI --- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 91adc06b1..c0d14fe57 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -96,15 +96,15 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t *rh_init) { // Set mode to host, must be set immediately after reset #if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX // LPC18XX/43XX need to set VBUS Power Select to HIGH - // RHPORT1 is fullspeed only (need external PHY for Highspeed) hcd_reg->USBMODE = USBMODE_CM_HOST | USBMODE_VBUS_POWER_SELECT; - #if !TUH_OPT_HIGH_SPEED - hcd_reg->PORTSC1 = PORTSC1_FORCE_FULL_SPEED; - #endif #else hcd_reg->USBMODE = USBMODE_CM_HOST; #endif + #if !TUH_OPT_HIGH_SPEED + hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; + #endif + return ehci_init(rhport, (uint32_t)&hcd_reg->CAPLENGTH, (uint32_t)&hcd_reg->USBCMD); } -- cgit v1.3.1 From 61e4b9ce3fba2fea731396c56eee1c7b5a2f5338 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 5 Mar 2026 23:24:14 +0700 Subject: add IAR warning flags to cmake build and fix them --- examples/device/cdc_msc/src/msc_disk.c | 2 +- examples/device/cdc_msc_freertos/src/msc_disk.c | 15 +++++-------- examples/device/cdc_uac2/src/main.c | 2 -- .../device/dynamic_configuration/src/msc_disk.c | 15 +++++-------- examples/device/hid_boot_interface/src/main.c | 2 -- examples/device/msc_dual_lun/src/main.c | 2 -- examples/device/net_lwip_webserver/src/main.c | 2 -- examples/device/uac2_speaker_fb/src/main.c | 6 +++-- examples/dual/host_hid_to_device_cdc/src/main.c | 2 -- examples/host/bare_api/src/main.c | 2 -- examples/host/device_info/src/main.c | 1 - examples/host/midi_rx/src/main.c | 2 -- examples/host/msc_file_explorer/src/main.c | 2 -- examples/host/msc_file_explorer/src/msc_app.c | 2 -- hw/bsp/family_support.cmake | 7 ++++++ src/class/dfu/dfu_device.c | 6 ++--- src/common/tusb_fifo.c | 19 ++++++++-------- src/common/tusb_fifo.h | 26 +++++++++------------- src/osal/osal_freertos.h | 18 ++++++++------- 19 files changed, 58 insertions(+), 75 deletions(-) diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index e091c2985..017acd039 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -238,7 +238,7 @@ int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, u (void) buffer; (void) bufsize; - // currently no other commands is supported + // currently no other commands are supported // Set Sense = Invalid Command Operation (void) tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 29ff86281..ff918205e 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -324,20 +324,17 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) { - // read10 & write10 has their own callback and MUST not be handled here + (void) lun; + (void) scsi_cmd; (void) buffer; (void) bufsize; - switch (scsi_cmd[0]) { - default: - // Set Sense = Invalid Command Operation - tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + // currently no other commands are supported - // negative means error -> tinyusb could stall and/or response with failed status - return -1; - } + // Set Sense = Invalid Command Operation + (void) tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); - return -1; + return -1; // stall/failed command request; } #endif diff --git a/examples/device/cdc_uac2/src/main.c b/examples/device/cdc_uac2/src/main.c index 22c462be7..cb7b3a142 100644 --- a/examples/device/cdc_uac2/src/main.c +++ b/examples/device/cdc_uac2/src/main.c @@ -65,8 +65,6 @@ int main(void) // printf("Hello, world!\r\n"); #endif } - - return 0; } //--------------------------------------------------------------------+ diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index e95b2e197..b545e4652 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -215,20 +215,17 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) { - // read10 & write10 has their own callback and MUST not be handled here + (void) lun; + (void) scsi_cmd; (void) buffer; (void) bufsize; - switch (scsi_cmd[0]) { - default: - // Set Sense = Invalid Command Operation - tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + // currently no other commands are supported - // negative means error -> tinyusb could stall and/or response with failed status - return -1; - } + // Set Sense = Invalid Command Operation + (void) tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); - return -1; + return -1; // stall/failed command request; } #endif diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 4de319f52..7f2153ae9 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -67,8 +67,6 @@ int main(void) { hid_task(); } - - return 0; } //--------------------------------------------------------------------+ diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index 74a60aa6b..a4ade6f9b 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -103,8 +103,6 @@ int main(void) { led_blinking_task(NULL); } #endif - - return 0; } #ifdef ESP_PLATFORM diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 9f26da2ba..8bd8a8c21 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -276,8 +276,6 @@ int main(void) { sys_check_timeouts(); // service lwip handle_link_state_switch(); } - - return 0; } /* lwip has provision for using a mutex, when applicable */ diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 8323d82e8..c3e97bb28 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -534,8 +534,9 @@ bool tud_audio_set_itf_close_ep_cb(uint8_t rhport, tusb_control_request_t const uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); - if (ITF_NUM_AUDIO_STREAMING == itf && alt == 0) + if (ITF_NUM_AUDIO_STREAMING == itf && alt == 0) { blink_interval_ms = BLINK_MOUNTED; + } return true; } @@ -569,7 +570,8 @@ bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t fu fifo_count = tud_audio_available(); // Same averaging method used in UAC2 class - fifo_count_avg = (uint32_t) (((uint64_t) fifo_count_avg * 63 + ((uint32_t) fifo_count << 16)) >> 6); + const uint32_t ff_count32 = (uint32_t) fifo_count << 16; + fifo_count_avg = (uint32_t) (((uint64_t) fifo_count_avg * 63 + ff_count32) >> 6); return true; } diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index ba8ba019a..c8fca48f8 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -98,8 +98,6 @@ int main(void) { tuh_task(); // tinyusb host task led_blinking_task(); } - - return 0; } //--------------------------------------------------------------------+ diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index ced2eaa32..81d4d8731 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -74,8 +74,6 @@ int main(void) { tuh_task(); led_blinking_task(); } - - return 0; } /*------------- TinyUSB Callbacks -------------*/ diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index fd4e9c3ed..b0e38dd6b 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -105,7 +105,6 @@ int main(void) { tuh_task(); // tinyusb host task led_blinking_task(NULL); } - return 0; #endif } diff --git a/examples/host/midi_rx/src/main.c b/examples/host/midi_rx/src/main.c index f189e0864..fb36906c6 100644 --- a/examples/host/midi_rx/src/main.c +++ b/examples/host/midi_rx/src/main.c @@ -58,8 +58,6 @@ int main(void) { led_blinking_task(); midi_host_rx_task(); } - - return 0; } //--------------------------------------------------------------------+ diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 0a8967380..f6bf9a60a 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -92,8 +92,6 @@ int main(void) { msc_app_task(); led_blinking_task(); } - - return 0; } //--------------------------------------------------------------------+ diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index 40a9ef57e..7e019818a 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -282,8 +282,6 @@ DRESULT disk_ioctl ( default: return RES_PARERR; } - - return RES_OK; } //--------------------------------------------------------------------+ diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 4299ad44e..c166a0618 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -105,6 +105,12 @@ set(WARN_FLAGS_GNU ) set(WARN_FLAGS_Clang ${WARN_FLAGS_GNU}) +set(WARN_FLAGS_IAR + --warnings_are_errors + --diag_suppress=Pa089 + --diag_suppress=Pe236 + ) + # Optimization if (NOT DEFINED CMAKE_BUILD_TYPE OR CMAKE_BUILD_TYPE STREQUAL "") set(CMAKE_BUILD_TYPE MinSizeRel CACHE STRING "Build type" FORCE) @@ -467,6 +473,7 @@ function(family_configure_common TARGET RTOS) target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") endif () elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_compile_options(${TARGET} PRIVATE $<$,$>:${WARN_FLAGS_IAR}>) target_link_options(${TARGET} PUBLIC "LINKER:--map=$.map") if (IAR_CSTAT) diff --git a/src/class/dfu/dfu_device.c b/src/class/dfu/dfu_device.c index d3cc53918..a09c53b7e 100644 --- a/src/class/dfu/dfu_device.c +++ b/src/class/dfu/dfu_device.c @@ -327,7 +327,7 @@ bool dfu_moded_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control default: if (stage == CONTROL_STAGE_SETUP) { - return reply_getstatus(rhport, request, _dfu_ctx.state, _dfu_ctx.status, 0); + return reply_getstatus(rhport, request, (dfu_state_t) _dfu_ctx.state, (dfu_status_t) _dfu_ctx.status, 0); } break; } @@ -376,7 +376,7 @@ static bool process_download_get_status(uint8_t rhport, uint8_t stage, const tus timeout = 0; } - return reply_getstatus(rhport, request, next_state, _dfu_ctx.status, timeout); + return reply_getstatus(rhport, request, next_state, (dfu_status_t) _dfu_ctx.status, timeout); } else if (stage == CONTROL_STAGE_ACK) { if (_dfu_ctx.flashing_in_progress) { _dfu_ctx.state = DFU_DNBUSY; @@ -405,7 +405,7 @@ static bool process_manifest_get_status(uint8_t rhport, uint8_t stage, const tus timeout = 0; } - return reply_getstatus(rhport, request, next_state, _dfu_ctx.status, timeout); + return reply_getstatus(rhport, request, next_state, (dfu_status_t) _dfu_ctx.status, timeout); } else if (stage == CONTROL_STAGE_ACK) { if (_dfu_ctx.flashing_in_progress) { _dfu_ctx.state = DFU_MANIFEST; diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 9f188f296..8bd79e56d 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -30,11 +30,6 @@ #define TU_FIFO_DBG 0 -// Suppress IAR warning -// Warning[Pa082]: undefined behavior: the order of volatile accesses is undefined in this statement -#if defined(__ICCARM__) - #pragma diag_suppress = Pa082 -#endif #if OSAL_MUTEX_REQUIRED @@ -496,7 +491,9 @@ uint16_t tu_fifo_peek_n_access_mode(tu_fifo_t *f, void *p_buffer, uint16_t n, ui // Read n items without removing it from the FIFO, correct read pointer if overflowed uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n) { ff_lock(f->mutex_rd); - const uint16_t ret = tu_fifo_peek_n_access_mode(f, p_buffer, n, f->wr_idx, f->rd_idx, NULL); + const uint16_t wr_idx = f->wr_idx; + const uint16_t rd_idx = f->rd_idx; + const uint16_t ret = tu_fifo_peek_n_access_mode(f, p_buffer, n, wr_idx, rd_idx, NULL); ff_unlock(f->mutex_rd); return ret; } @@ -506,7 +503,8 @@ uint16_t tu_fifo_read_n_access_mode(tu_fifo_t *f, void *buffer, uint16_t n, cons ff_lock(f->mutex_rd); // Peek the data: f->rd_idx might get modified in case of an overflow so we can not use a local variable - n = tu_fifo_peek_n_access_mode(f, buffer, n, f->wr_idx, f->rd_idx, access_mode); + const uint16_t wr_idx = f->wr_idx; + n = tu_fifo_peek_n_access_mode(f, buffer, n, wr_idx, f->rd_idx, access_mode); f->rd_idx = advance_index(f->depth, f->rd_idx, n); ff_unlock(f->mutex_rd); @@ -633,7 +631,8 @@ static bool ff_peek_local(tu_fifo_t *f, void *buf, uint16_t wr_idx, uint16_t rd_ bool tu_fifo_read(tu_fifo_t *f, void *buffer) { // Peek the data // f->rd_idx might get modified in case of an overflow so we can not use a local variable - const bool ret = ff_peek_local(f, buffer, f->wr_idx, f->rd_idx); + const uint16_t wr_idx = f->wr_idx; + const bool ret = ff_peek_local(f, buffer, wr_idx, f->rd_idx); if (ret) { ff_lock(f->mutex_rd); f->rd_idx = advance_index(f->depth, f->rd_idx, 1); @@ -645,7 +644,9 @@ bool tu_fifo_read(tu_fifo_t *f, void *buffer) { // Read one item without removing it from the FIFO, correct read index if overflowed bool tu_fifo_peek(tu_fifo_t *f, void *p_buffer) { - return ff_peek_local(f, p_buffer, f->wr_idx, f->rd_idx); + const uint16_t wr_idx = f->wr_idx; + const uint16_t rd_idx = f->rd_idx; + return ff_peek_local(f, p_buffer, wr_idx, rd_idx); } // Write one element into the buffer diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index a3829e38e..b31a0802e 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -120,9 +120,9 @@ typedef struct { uint8_t *buffer; // buffer pointer uint16_t depth; // max items bool overwritable; // overwritable when full - // 1 byte padding here + // 1 byte padding here - volatile uint16_t wr_idx; // write index TODO maybe can drop volatile + volatile uint16_t wr_idx; // write index volatile uint16_t rd_idx; // read index #if OSAL_MUTEX_REQUIRED @@ -289,30 +289,26 @@ TU_ATTR_ALWAYS_INLINE static inline bool tu_fifo_empty(const tu_fifo_t *f) { return wr_idx == rd_idx; } -// Suppress IAR warning -// Warning[Pa082]: undefined behavior: the order of volatile accesses is undefined in this statement -#if defined(__ICCARM__) -#pragma diag_suppress = Pa082 -#endif - // return number of items in fifo, capped to fifo's depth TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_count(const tu_fifo_t *f) { - return tu_min16(tu_ff_overflow_count(f->depth, f->wr_idx, f->rd_idx), f->depth); + const uint16_t wr_idx = f->wr_idx; + const uint16_t rd_idx = f->rd_idx; + return tu_min16(tu_ff_overflow_count(f->depth, wr_idx, rd_idx), f->depth); } // check if fifo is full TU_ATTR_ALWAYS_INLINE static inline bool tu_fifo_full(const tu_fifo_t *f) { - return tu_ff_overflow_count(f->depth, f->wr_idx, f->rd_idx) >= f->depth; + const uint16_t wr_idx = f->wr_idx; + const uint16_t rd_idx = f->rd_idx; + return tu_ff_overflow_count(f->depth, wr_idx, rd_idx) >= f->depth; } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_remaining(const tu_fifo_t *f) { - return tu_ff_remaining_local(f->depth, f->wr_idx, f->rd_idx); + const uint16_t wr_idx = f->wr_idx; + const uint16_t rd_idx = f->rd_idx; + return tu_ff_remaining_local(f->depth, wr_idx, rd_idx); } -#if defined(__ICCARM__) - #pragma diag_default=Pa082 -#endif - #ifdef __cplusplus } #endif diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 32ee2d55c..db724179d 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -141,11 +141,12 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { if (in_isr) { - if (TUP_MCU_MULTIPLE_CORE == 0) { - (void) ctx; - return; // single core MCU does not need to lock in ISR - } + #if TUP_MCU_MULTIPLE_CORE *ctx = taskENTER_CRITICAL_FROM_ISR(); + #else + (void) ctx; + return; // single core MCU does not need to lock in ISR + #endif } else { taskENTER_CRITICAL(); } @@ -153,11 +154,12 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bo TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { if (in_isr) { - if (TUP_MCU_MULTIPLE_CORE == 0) { - (void) ctx; - return; // single core MCU does not need to lock in ISR - } + #if TUP_MCU_MULTIPLE_CORE taskEXIT_CRITICAL_FROM_ISR(*ctx); + #else + (void) ctx; + return; // single core MCU does not need to lock in ISR + #endif } else { taskEXIT_CRITICAL(); } -- cgit v1.3.1 From 94baf394686f92d9edaf109dcae30fa7b531fefc Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 6 Mar 2026 10:59:32 +0700 Subject: fix warnings --- hw/bsp/stm32f1/family.c | 4 ++-- hw/bsp/stm32l0/family.c | 3 ++- hw/bsp/stm32wba/family.c | 5 ++++- lib/networking/rndis_reports.c | 2 +- src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h | 8 ++++---- 5 files changed, 13 insertions(+), 9 deletions(-) diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c index fae61ca9e..78a425453 100644 --- a/hw/bsp/stm32f1/family.c +++ b/hw/bsp/stm32f1/family.c @@ -148,12 +148,12 @@ void board_init(void) { #ifdef USB_CONNECT_PIN void dcd_disconnect(uint8_t rhport) { (void)rhport; - HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, 1-USB_CONNECT_STATE); + HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, (GPIO_PinState)(1 - USB_CONNECT_STATE)); } void dcd_connect(uint8_t rhport) { (void)rhport; - HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, USB_CONNECT_STATE); + HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, (GPIO_PinState)USB_CONNECT_STATE); } #endif diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c index 192f014f4..7fd076dbd 100644 --- a/hw/bsp/stm32l0/family.c +++ b/hw/bsp/stm32l0/family.c @@ -123,7 +123,8 @@ void board_init(void) { //--------------------------------------------------------------------+ void board_led_write(bool state) { - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); + GPIO_PinState pin_state = (GPIO_PinState)(state ? LED_STATE_ON : (1 - LED_STATE_ON)); + HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); } uint32_t board_button_read(void) { diff --git a/hw/bsp/stm32wba/family.c b/hw/bsp/stm32wba/family.c index e058a80a1..878355b48 100644 --- a/hw/bsp/stm32wba/family.c +++ b/hw/bsp/stm32wba/family.c @@ -175,7 +175,10 @@ void board_init(void) { #endif // USB_OTG_HS } -void board_led_write(bool state) { HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); } +void board_led_write(bool state) { + GPIO_PinState pin_state = (GPIO_PinState)(state ? LED_STATE_ON : (1 - LED_STATE_ON)); + HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); +} uint32_t board_button_read(void) { return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN) == BUTTON_STATE_ACTIVE; } diff --git a/lib/networking/rndis_reports.c b/lib/networking/rndis_reports.c index e2849fb10..5e824d5a5 100644 --- a/lib/networking/rndis_reports.c +++ b/lib/networking/rndis_reports.c @@ -44,7 +44,7 @@ static const uint8_t *const permanent_hwaddr = tud_network_mac_address; static usb_eth_stat_t usb_eth_stat = { 0, 0, 0, 0 }; static uint32_t oid_packet_filter = 0x0000000; -static rndis_state_t rndis_state; +TU_ATTR_UNUSED static rndis_state_t rndis_state; static const uint32_t OIDSupportedList[] = { diff --git a/src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h b/src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h index 178eec419..c22aea887 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h +++ b/src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h @@ -47,10 +47,10 @@ static const ci_hs_controller_t _ci_controller[] = #define CI_HS_REG(_port) ((ci_hs_regs_t*) _ci_controller[_port].reg_base) -#define CI_DCD_INT_ENABLE(_p) NVIC_EnableIRQ (_ci_controller[_p].irqnum) -#define CI_DCD_INT_DISABLE(_p) NVIC_DisableIRQ(_ci_controller[_p].irqnum) +#define CI_DCD_INT_ENABLE(_p) NVIC_EnableIRQ ((IRQn_Type)_ci_controller[_p].irqnum) +#define CI_DCD_INT_DISABLE(_p) NVIC_DisableIRQ((IRQn_Type)_ci_controller[_p].irqnum) -#define CI_HCD_INT_ENABLE(_p) NVIC_EnableIRQ (_ci_controller[_p].irqnum) -#define CI_HCD_INT_DISABLE(_p) NVIC_DisableIRQ(_ci_controller[_p].irqnum) +#define CI_HCD_INT_ENABLE(_p) NVIC_EnableIRQ ((IRQn_Type)_ci_controller[_p].irqnum) +#define CI_HCD_INT_DISABLE(_p) NVIC_DisableIRQ((IRQn_Type)_ci_controller[_p].irqnum) #endif -- cgit v1.3.1