From 89205438c2cbee815d8f5cdbf9449daa68e9a9f3 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 29 Nov 2020 17:09:53 +0700 Subject: move xiao to samd21 group --- hw/bsp/samd21/boards/seeeduino_xiao/board.h | 50 +++++++ hw/bsp/samd21/boards/seeeduino_xiao/board.mk | 9 ++ .../samd21/boards/seeeduino_xiao/seeeduino_xiao.ld | 146 ++++++++++++++++++++ hw/bsp/samd51/boards/feather_m4_express/board.mk | 1 - hw/bsp/seeeduino_xiao/board.mk | 44 ------ hw/bsp/seeeduino_xiao/samd21g18a_flash.ld | 146 -------------------- hw/bsp/seeeduino_xiao/seeeduino_xiao.c | 150 --------------------- 7 files changed, 205 insertions(+), 341 deletions(-) create mode 100644 hw/bsp/samd21/boards/seeeduino_xiao/board.h create mode 100644 hw/bsp/samd21/boards/seeeduino_xiao/board.mk create mode 100644 hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld delete mode 100644 hw/bsp/seeeduino_xiao/board.mk delete mode 100644 hw/bsp/seeeduino_xiao/samd21g18a_flash.ld delete mode 100644 hw/bsp/seeeduino_xiao/seeeduino_xiao.c diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.h b/hw/bsp/samd21/boards/seeeduino_xiao/board.h new file mode 100644 index 000000000..abededed2 --- /dev/null +++ b/hw/bsp/samd21/boards/seeeduino_xiao/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 26 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 9 // PA4 pin D1 on seed input +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.mk b/hw/bsp/samd21/boards/seeeduino_xiao/board.mk new file mode 100644 index 000000000..54591b3a5 --- /dev/null +++ b/hw/bsp/samd21/boards/seeeduino_xiao/board.mk @@ -0,0 +1,9 @@ +CFLAGS += -D__SAMD21G18A__ + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld b/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld new file mode 100644 index 000000000..cf11c4c35 --- /dev/null +++ b/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K /* 8K offset to preserve bootloader */ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd51/boards/feather_m4_express/board.mk b/hw/bsp/samd51/boards/feather_m4_express/board.mk index 57a680e91..a8a98a987 100644 --- a/hw/bsp/samd51/boards/feather_m4_express/board.mk +++ b/hw/bsp/samd51/boards/feather_m4_express/board.mk @@ -1,6 +1,5 @@ CFLAGS += -D__SAMD51J19A__ -# All source paths should be relative to the top level. LD_FILE = $(BOARD_PATH)/$(BOARD).ld # For flash-jlink target diff --git a/hw/bsp/seeeduino_xiao/board.mk b/hw/bsp/seeeduino_xiao/board.mk deleted file mode 100644 index c954dbc29..000000000 --- a/hw/bsp/seeeduino_xiao/board.mk +++ /dev/null @@ -1,44 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0plus \ - -nostdlib -nostartfiles \ - -D__SAMD21G18A__ \ - -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ - -DCFG_TUSB_MCU=OPT_MCU_SAMD21 - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/samd21g18a_flash.ld - -SRC_C += \ - hw/mcu/microchip/asf4/samd21/gcc/gcc/startup_samd21.c \ - hw/mcu/microchip/asf4/samd21/gcc/system_samd21.c \ - hw/mcu/microchip/asf4/samd21/hpl/gclk/hpl_gclk.c \ - hw/mcu/microchip/asf4/samd21/hpl/pm/hpl_pm.c \ - hw/mcu/microchip/asf4/samd21/hpl/sysctrl/hpl_sysctrl.c \ - hw/mcu/microchip/asf4/samd21/hal/src/hal_atomic.c - -INC += \ - $(TOP)/hw/mcu/microchip/asf4/samd21/ \ - $(TOP)/hw/mcu/microchip/asf4/samd21/config \ - $(TOP)/hw/mcu/microchip/asf4/samd21/include \ - $(TOP)/hw/mcu/microchip/asf4/samd21/hal/include \ - $(TOP)/hw/mcu/microchip/asf4/samd21/hal/utils/include \ - $(TOP)/hw/mcu/microchip/asf4/samd21/hpl/pm/ \ - $(TOP)/hw/mcu/microchip/asf4/samd21/hpl/port \ - $(TOP)/hw/mcu/microchip/asf4/samd21/hri \ - $(TOP)/hw/mcu/microchip/asf4/samd21/CMSIS/Include - -# For TinyUSB port source -VENDOR = microchip -CHIP_FAMILY = samd - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/seeeduino_xiao/samd21g18a_flash.ld b/hw/bsp/seeeduino_xiao/samd21g18a_flash.ld deleted file mode 100644 index cf11c4c35..000000000 --- a/hw/bsp/seeeduino_xiao/samd21g18a_flash.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K /* 8K offset to preserve bootloader */ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/seeeduino_xiao/seeeduino_xiao.c b/hw/bsp/seeeduino_xiao/seeeduino_xiao.c deleted file mode 100644 index 0456228da..000000000 --- a/hw/bsp/seeeduino_xiao/seeeduino_xiao.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "sam.h" -#include "bsp/board.h" - -#include "hal/include/hal_gpio.h" -#include "hal/include/hal_init.h" -#include "hri/hri_nvmctrl_d21.h" - -#include "hpl/gclk/hpl_gclk_base.h" -#include "hpl_pm_config.h" -#include "hpl/pm/hpl_pm_base.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_Handler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define LED_PIN 26 -#define BUTTON_PIN 9 // PA4, pin D1 on seeed pinout - -/* Referenced GCLKs, should be initialized firstly */ -#define _GCLK_INIT_1ST (1 << 0 | 1 << 1) - -/* Not referenced GCLKs, initialized last */ -#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST) - -void board_init(void) -{ - // Clock init ( follow hpl_init.c ) - hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, 2); - - _pm_init(); - _sysctrl_init_sources(); -#if _GCLK_INIT_1ST - _gclk_init_generators_by_fref(_GCLK_INIT_1ST); -#endif - _sysctrl_init_referenced_generators(); - _gclk_init_generators_by_fref(_GCLK_INIT_LAST); - - // Update SystemCoreClock since it is hard coded with asf4 and not correct - // Init 1ms tick timer (samd SystemCoreClock may not correct) - SystemCoreClock = CONF_CPU_FREQUENCY; - SysTick_Config(CONF_CPU_FREQUENCY / 1000); - - // Led init - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_level(LED_PIN, 0); - - // Button init - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - /* USB Clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - _pm_enable_bus_clock(PM_BUS_APBB, USB); - _pm_enable_bus_clock(PM_BUS_AHB, USB); - _gclk_enable_channel(USB_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); - - // USB Pin Init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // button is active low - return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler(void) { - while(1); -} -- cgit v1.3.1