From b73a46bf8f26b497bf66ec0d479c0b7194e195ca Mon Sep 17 00:00:00 2001 From: Adam Slaymark Date: Mon, 18 Aug 2025 12:05:36 +0100 Subject: added support for stm32l496nucleo --- .../boards/stm32l496nucleo/STM32L496XX_FLASH.ld | 208 +++++++++++++++++++++ hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake | 10 + hw/bsp/stm32l4/boards/stm32l496nucleo/board.h | 158 ++++++++++++++++ hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk | 13 ++ hw/bsp/stm32l4/family.c | 2 +- 5 files changed, 390 insertions(+), 1 deletion(-) create mode 100644 hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld create mode 100644 hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake create mode 100644 hw/bsp/stm32l4/boards/stm32l496nucleo/board.h create mode 100644 hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld new file mode 100644 index 000000000..1978d2077 --- /dev/null +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld @@ -0,0 +1,208 @@ +/* +****************************************************************************** +** + +** File : LinkerScript.ld +** +** Author : STM32CubeMX +** +** Abstract : Linker script for STM32L496ZGTxP series +** 1024Kbytes FLASH and 320Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© COPYRIGHT(c) 2025 STMicroelectronics

+** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of STMicroelectronics nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x500; /* required amount of heap */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K +RAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 64K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(8); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(8); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(8); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(8); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(8); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(8); + } >FLASH + + .ARM.extab (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(8); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(8); + } >FLASH + + .ARM (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(8); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(8); + } >FLASH + + .preinit_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(8); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(8); + } >FLASH + + .init_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(8); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(8); + } >FLASH + + .fini_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + + { + . = ALIGN(8); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(8); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(8); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(8); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + +} + + diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake new file mode 100644 index 000000000..78c0423a8 --- /dev/null +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32l496xx) +set(JLINK_DEVICE stm32l496kb) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L496XX_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32L496xx + ) +endfunction() diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h new file mode 100644 index 000000000..175ebabda --- /dev/null +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h @@ -0,0 +1,158 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: STM32 L496 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-l496ZG-P.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_7 +#define LED_STATE_ON 1 + +// Not a real button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV LPUART1 +#define UART_CLK_EN __HAL_RCC_LPUART1_CLK_ENABLE +#define UART_GPIO_PORT GPIOG +#define UART_GPIO_AF GPIO_AF8_LPUART1 +#define UART_TX_PIN GPIO_PIN_7 +#define UART_RX_PIN GPIO_PIN_8 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (MSI) + * SYSCLK(Hz) = 80000000 + * HCLK(Hz) = 80000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 1 + * APB2 Prescaler = 1 + * MSI Frequency(Hz) = 8000000 + * PLL_M = 1 + * PLL_N = 10 + * PLL_Q = 2 + * PLL_R = 2 + * VDD(V) = 3.3 + * @param None + * @retval None + */ + +static inline void board_clock_init(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_CRSInitTypeDef RCC_CRSInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + + /** Configure LSE Drive Capability + */ + HAL_PWR_EnableBkUpAccess(); + __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW); + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48|RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 10; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + // /** Enable the SYSCFG APB clock + // */ + // __HAL_RCC_CRS_CLK_ENABLE(); + // + // /** Configures CRS + // */ + // RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; + // RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; + // RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING; + // RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000,1000); + // RCC_CRSInitStruct.ErrorLimitValue = 34; + // RCC_CRSInitStruct.HSI48CalibrationValue = 32; + // + // HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct); + + /* Select HSI48 output as USB clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL output as UART clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LPUART1; + PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PCLK1; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); +} + +static inline void board_vbus_sense_init(void) +{ + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk new file mode 100644 index 000000000..b5ed800a4 --- /dev/null +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk @@ -0,0 +1,13 @@ +CFLAGS += \ + -DSTM32L496xx \ + +# GCC +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l496xx.s +LD_FILE_GCC = $(BOARD_PATH)/STM32L412KBUx_FLASH.ld + +# IAR +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l496xx.s +LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l496xx_flash.icf + +# For flash-jlink target +JLINK_DEVICE = stm32l496xx diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c index 2b555b5c2..084866dd3 100644 --- a/hw/bsp/stm32l4/family.c +++ b/hw/bsp/stm32l4/family.c @@ -143,7 +143,7 @@ void board_init(void) { GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; #if defined(USB_OTG_FS) GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; #else -- cgit v1.3.1 From a75daaf8194de6f1c821a8e8073c4e2e19e66197 Mon Sep 17 00:00:00 2001 From: Adam Slaymark Date: Mon, 18 Aug 2025 12:17:46 +0100 Subject: fixed typo in l496 make file --- hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk index b5ed800a4..290c4f908 100644 --- a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk @@ -3,7 +3,7 @@ CFLAGS += \ # GCC SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l496xx.s -LD_FILE_GCC = $(BOARD_PATH)/STM32L412KBUx_FLASH.ld +LD_FILE_GCC = $(BOARD_PATH)/STM32L496KBUx_FLASH.ld # IAR SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l496xx.s -- cgit v1.3.1 From f69d89454ef4a57a1ff199d42cb24a7eff4f6d90 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 3 Sep 2025 17:42:23 +0700 Subject: fix pre-commit and fix READONLY linker keyword with clang --- .../boards/stm32l496nucleo/STM32L496XX_FLASH.ld | 29 +++++++++++----------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld index 1978d2077..5aa932e20 100644 --- a/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld @@ -51,8 +51,6 @@ /* Entry Point */ ENTRY(Reset_Handler) -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */ /* Generate a link error if heap and stack don't fit into RAM */ _Min_Heap_Size = 0x500; /* required amount of heap */ _Min_Stack_Size = 0x1000; /* required amount of stack */ @@ -65,6 +63,9 @@ RAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 64K FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K } +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */ + /* Define output sections */ SECTIONS { @@ -102,14 +103,14 @@ SECTIONS . = ALIGN(8); } >FLASH - .ARM.extab (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ - { + .ARM.extab : + { . = ALIGN(8); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(8); } >FLASH - .ARM (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + .ARM : { . = ALIGN(8); __exidx_start = .; @@ -118,7 +119,7 @@ SECTIONS . = ALIGN(8); } >FLASH - .preinit_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + .preinit_array : { . = ALIGN(8); PROVIDE_HIDDEN (__preinit_array_start = .); @@ -126,8 +127,8 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(8); } >FLASH - - .init_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + + .init_array : { . = ALIGN(8); PROVIDE_HIDDEN (__init_array_start = .); @@ -137,7 +138,7 @@ SECTIONS . = ALIGN(8); } >FLASH - .fini_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + .fini_array : { . = ALIGN(8); @@ -152,7 +153,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(8); _sdata = .; /* create a global symbol at data start */ @@ -165,12 +166,12 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) @@ -193,7 +194,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -204,5 +205,3 @@ SECTIONS } } - - -- cgit v1.3.1 From 2d979ee4a9e7de6b956c373842e8c81c2e6382b4 Mon Sep 17 00:00:00 2001 From: R Date: Fri, 12 Sep 2025 22:16:15 +0100 Subject: ohci: Add functions used for explicit cache operations --- src/portable/ohci/ohci.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 81091c9a7..9450b8d0e 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -143,6 +143,15 @@ enum { PID_FROM_TD = 0, }; +//--------------------------------------------------------------------+ +// Support for explicit D-cache operations +//--------------------------------------------------------------------+ +TU_ATTR_WEAK bool hcd_dcache_clean(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; return true; } +TU_ATTR_WEAK bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; return true; } +#ifndef hcd_dcache_uncached +#define hcd_dcache_uncached(x) (x) +#endif + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -- cgit v1.3.1 From 839149c5c0b667a8080de39c85cdbdd291be4dc5 Mon Sep 17 00:00:00 2001 From: R Date: Fri, 12 Sep 2025 22:16:46 +0100 Subject: ohci: Align TDs to cache lines --- src/portable/ohci/ohci.h | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/src/portable/ohci/ohci.h b/src/portable/ohci/ohci.h index 94bad5df7..12c411764 100644 --- a/src/portable/ohci/ohci.h +++ b/src/portable/ohci/ohci.h @@ -61,6 +61,31 @@ typedef struct { TU_VERIFY_STATIC( sizeof(ohci_hcca_t) == 256, "size is not correct" ); +// An OHCI host controller is controlled using data structures placed in memory (RAM). +// It needs to both read and write these data structures (as defined by the OHCI specification), +// and this can be mentally conceptualized similar to two software threads running on +// two different CPUs. In order to prevent a _data race_ where data gets corrupted, +// the CPU and the OHCI host controller need to agree on how the memory should be accessed. +// In this driver, we do this by transferring logical ownership of transfer descriptors (TDs) +// between the CPU and the OHCI host controller. Only the device which holds the logical ownership +// is allowed to read or write the TD. This ownership is not visible anywhere in the code, +// but it instead must be inferred based on the logical state of the transfer. +// +// If dcache-supporting mode is enabled, we need to do additional manual cache operations +// in order to correctly transfer this logical ownership and prevent data corruption. +// In order to do this, we also choose to align each OHCI TD so that it doesn't +// share CPU cache lines with other TDs. This is because manual cache operations +// can only be performed on cache line granularity. In other words, one cache line is +// the _smallest_ amount that can be read/written at a time. If there were to be multiple TDs +// in the same cache line, they would be required to always have the same logical ownership. +// This ends up being impossible to guarantee, so we choose a design which avoids the situation entirely. +// +// TDs have a minimum alignment requirement according to the OHCI specification. This is 16 bytes for +// a general TD but 32 bytes for an isochronous TD. It happens that typical CPU cache line sizes are usually +// a power of 2 at least 32. In order to simplify code later in this file, we assume this +// as an additional requirement. +TU_VERIFY_STATIC( (CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 0) % 32 == 0, "cache line not multiple of 32" ); + // common link item for gtd and itd for list travel // use as pointer only typedef struct TU_ATTR_ALIGNED(16) { @@ -69,7 +94,7 @@ typedef struct TU_ATTR_ALIGNED(16) { uint32_t reserved2; }ohci_td_item_t; -typedef struct TU_ATTR_ALIGNED(16) +typedef struct TU_ATTR_ALIGNED(CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 16) { // Word 0 uint32_t used : 1; @@ -92,7 +117,7 @@ typedef struct TU_ATTR_ALIGNED(16) uint8_t* buffer_end; } ohci_gtd_t; -TU_VERIFY_STATIC( sizeof(ohci_gtd_t) == 16, "size is not correct" ); +TU_VERIFY_STATIC( sizeof(ohci_gtd_t) == CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 16, "size is not correct" ); typedef struct TU_ATTR_ALIGNED(16) { @@ -129,7 +154,7 @@ typedef struct TU_ATTR_ALIGNED(16) TU_VERIFY_STATIC( sizeof(ohci_ed_t) == 16, "size is not correct" ); -typedef struct TU_ATTR_ALIGNED(32) +typedef struct TU_ATTR_ALIGNED(CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 32) { /*---------- Word 1 ----------*/ uint32_t starting_frame : 16; @@ -152,7 +177,7 @@ typedef struct TU_ATTR_ALIGNED(32) volatile uint16_t offset_packetstatus[8]; } ochi_itd_t; -TU_VERIFY_STATIC( sizeof(ochi_itd_t) == 32, "size is not correct" ); +TU_VERIFY_STATIC( sizeof(ochi_itd_t) == CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 32, "size is not correct" ); typedef struct { uint16_t expected_bytes; // up to 8192 bytes so max is 13 bits -- cgit v1.3.1 From 330d9d7f426b3227149e76fc7dd167e2cd3745ad Mon Sep 17 00:00:00 2001 From: R Date: Fri, 12 Sep 2025 23:33:47 +0100 Subject: ohci: Re-implement TD allocation, matching the specification The initial motivation for doing this is to remove the `used` flag in the TD. If we use this flag, we end up being required to read from TDs that the OHCI controller might be modifying (i.e. the OHCI controller logically owns the TD). This happens when we try to allocate a new, empty TD while the OHCI host controller is working on a transfer. Move the `used` flag to `gtd_extra_data_t`. This data is only used by the CPU, and the OHCI controller never accesses it. The existing allocation method for TDs does *not* put an empty TD onto each ED (i.e it does *not* do what is shown in Figure 5-6 of the OHCI specification). Instead, the NextTD field of the last TD is set to 0. The TailP field of the ED is also set to 0. This works in many cases. However, this implementation means that the CPU may end up trying to write to the NextTD field of an in-progress transfer while the OHCI host controller logically owns it. Change the implementation to use an empty TD, as suggested by the specification, for endpoints other than EP0. This avoids the above issue. It is not necessary to make the change for EP0 because only at most one TD can ever be pending at a time. The above change should also remove the need for the stall workaround. In the future, we want to modify the code to access EDs through an uncached mapping. Because uncached mappings are slow, we want to access EDs as little as possible. Currently, when a TD completes, we access an ED in order to figure out the device address and endpoint number of the TD which was completed. Because moving `used` to `gtd_extra_data_t` necessitates expanding it, we have enough room to also store the device address and endpoint number of the TD. This patch does so. With the above two changes, we no longer need to access an ED when a TD completes. Also remove the `index` field from TDs as it is no longer necessary. --- src/portable/ohci/ohci.c | 82 ++++++++++++++++++------------------------------ src/portable/ohci/ohci.h | 8 +++-- 2 files changed, 35 insertions(+), 55 deletions(-) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 9450b8d0e..b297173bc 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -355,7 +355,6 @@ static void ed_init(ohci_ed_t *p_ed, uint8_t dev_addr, uint16_t ep_size, uint8_t static void gtd_init(ohci_gtd_t *p_td, uint8_t *data_ptr, uint16_t total_bytes) { tu_memclr(p_td, sizeof(ohci_gtd_t)); - p_td->used = 1; gtd_get_extra_data(p_td)->expected_bytes = total_bytes; p_td->buffer_rounding = 1; // less than queued length is not a error @@ -439,25 +438,15 @@ static ohci_gtd_t * gtd_find_free(void) { for(uint8_t i=0; i < GTD_MAX; i++) { - if ( !ohci_data.gtd_pool[i].used ) return &ohci_data.gtd_pool[i]; + if ( !ohci_data.gtd_extra[i].used ) { + ohci_data.gtd_extra[i].used = 1; + return &ohci_data.gtd_pool[i]; + } } return NULL; } -static void td_insert_to_ed(ohci_ed_t* p_ed, ohci_gtd_t * p_gtd) -{ - // tail is always NULL - if ( tu_align16(p_ed->td_head.address) == 0 ) - { // TD queue is empty --> head = TD - p_ed->td_head.address |= (uint32_t) _phys_addr(p_gtd); - } - else - { // TODO currently only support queue up to 2 TD each endpoint at a time - ((ohci_gtd_t*) tu_align16((uint32_t)_virt_addr((void *)p_ed->td_head.address)))->next = (uint32_t) _phys_addr(p_gtd); - } -} - //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ @@ -490,6 +479,16 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return true; } + if ( tu_edpt_number(ep_desc->bEndpointAddress) != 0 ) { + // Get an empty TD and use it as the end-of-list marker. + // This marker TD will be used when a transfer is made on this EP + // (and a new, empty TD will be allocated for the next-next transfer). + ohci_gtd_t* gtd = gtd_find_free(); + TU_ASSERT(gtd); + hcd_dcache_uncached(p_ed->td_head).address = (uint32_t)_phys_addr(gtd); + hcd_dcache_uncached(p_ed->td_tail) = (uint32_t)_phys_addr(gtd); + } + ed_list_insert( p_ed_head[ep_desc->bmAttributes.xfer], p_ed ); return true; @@ -508,7 +507,8 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet ohci_gtd_t *qtd = &ohci_data.control[dev_addr].gtd; gtd_init(qtd, (uint8_t*)(uintptr_t) setup_packet, 8); - qtd->index = dev_addr; + gtd_get_extra_data(qtd)->dev_addr = dev_addr; + gtd_get_extra_data(qtd)->ep_addr = tu_edpt_addr(0, TUSB_DIR_OUT); qtd->pid = PID_SETUP; qtd->data_toggle = GTD_DT_DATA0; qtd->delay_interrupt = OHCI_INT_ON_COMPLETE_YES; @@ -534,8 +534,9 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * ohci_gtd_t* gtd = &ohci_data.control[dev_addr].gtd; gtd_init(gtd, buffer, buflen); + gtd_get_extra_data(gtd)->dev_addr = dev_addr; + gtd_get_extra_data(gtd)->ep_addr = ep_addr; - gtd->index = dev_addr; gtd->pid = dir ? PID_IN : PID_OUT; gtd->data_toggle = GTD_DT_DATA1; // Both Data and Ack stage start with DATA1 gtd->delay_interrupt = OHCI_INT_ON_COMPLETE_YES; @@ -546,15 +547,20 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * }else { ohci_ed_t * ed = ed_from_addr(dev_addr, ep_addr); - ohci_gtd_t* gtd = gtd_find_free(); - - TU_ASSERT(gtd); + ohci_gtd_t *gtd = (ohci_gtd_t *)_virt_addr((void *)hcd_dcache_uncached(ed->td_tail)); gtd_init(gtd, buffer, buflen); - gtd->index = ed-ohci_data.ed_pool; + gtd_get_extra_data(gtd)->dev_addr = dev_addr; + gtd_get_extra_data(gtd)->ep_addr = ep_addr; gtd->delay_interrupt = OHCI_INT_ON_COMPLETE_YES; - td_insert_to_ed(ed, gtd); + // Insert a new, empty TD at the tail, to be used by the next transfer + ohci_gtd_t* new_gtd = gtd_find_free(); + TU_ASSERT(new_gtd); + + gtd->next = (uint32_t)_phys_addr(new_gtd); + + hcd_dcache_uncached(ed->td_tail) = (uint32_t)_phys_addr(new_gtd); tusb_xfer_type_t xfer_type = ed_get_xfer_type( ed_from_addr(dev_addr, ep_addr) ); if (TUSB_XFER_BULK == xfer_type) OHCI_REG->command_status_bit.bulk_list_filled = 1; @@ -614,17 +620,6 @@ static inline bool gtd_is_control(ohci_gtd_t const * const p_qtd) return ((uint32_t) p_qtd) < ((uint32_t) ohci_data.gtd_pool); // check ohci_data_t for memory layout } -static inline ohci_ed_t* gtd_get_ed(ohci_gtd_t const * const p_qtd) -{ - if ( gtd_is_control(p_qtd) ) - { - return &ohci_data.control[p_qtd->index].ed; - }else - { - return &ohci_data.ed_pool[p_qtd->index]; - } -} - static gtd_extra_data_t *gtd_get_extra_data(ohci_gtd_t const * const gtd) { if ( gtd_is_control(gtd) ) { uint8_t idx = ((uintptr_t)gtd - (uintptr_t)&ohci_data.control->gtd) / sizeof(ohci_data.control[0]); @@ -661,29 +656,12 @@ static void done_queue_isr(uint8_t hostid) xfer_result_t const event = (qtd->condition_code == OHCI_CCODE_NO_ERROR) ? XFER_RESULT_SUCCESS : (qtd->condition_code == OHCI_CCODE_STALL) ? XFER_RESULT_STALLED : XFER_RESULT_FAILED; - qtd->used = 0; // free TD + gtd_get_extra_data(qtd)->used = 0; // free TD if ( (qtd->delay_interrupt == OHCI_INT_ON_COMPLETE_YES) || (event != XFER_RESULT_SUCCESS) ) { - ohci_ed_t * const ed = gtd_get_ed(qtd); uint32_t const xferred_bytes = gtd_get_extra_data(qtd)->expected_bytes - gtd_xfer_byte_left((uint32_t) qtd->buffer_end, (uint32_t) qtd->current_buffer_pointer); - // NOTE Assuming the current list is BULK and there is no other EDs in the list has queued TDs. - // When there is a error resulting this ED is halted, and this EP still has other queued TD - // --> the Bulk list only has this halted EP queueing TDs (remaining) - // --> Bulk list will be considered as not empty by HC !!! while there is no attempt transaction on this list - // --> HC will not process Control list (due to service ratio when Bulk list not empty) - // To walk-around this, the halted ED will have TailP = HeadP (empty list condition), when clearing halt - // the TailP must be set back to NULL for processing remaining TDs - if (event != XFER_RESULT_SUCCESS) - { - ed->td_tail &= 0x0Ful; - ed->td_tail |= tu_align16(ed->td_head.address); // mark halted EP as empty queue - if ( event == XFER_RESULT_STALLED ) ed->is_stalled = 1; - } - - uint8_t dir = (ed->ep_number == 0) ? (qtd->pid == PID_IN) : (ed->pid == PID_IN); - - hcd_event_xfer_complete(ed->dev_addr, tu_edpt_addr(ed->ep_number, dir), xferred_bytes, event, true); + hcd_event_xfer_complete(gtd_get_extra_data(qtd)->dev_addr, gtd_get_extra_data(qtd)->ep_addr, xferred_bytes, event, true); } td_head = (ohci_td_item_t*) _virt_addr((void *)td_head->next); diff --git a/src/portable/ohci/ohci.h b/src/portable/ohci/ohci.h index 12c411764..8483686fa 100644 --- a/src/portable/ohci/ohci.h +++ b/src/portable/ohci/ohci.h @@ -97,9 +97,7 @@ typedef struct TU_ATTR_ALIGNED(16) { typedef struct TU_ATTR_ALIGNED(CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 16) { // Word 0 - uint32_t used : 1; - uint32_t index : 8; // endpoint index the gtd belongs to, or device address in case of control xfer - uint32_t : 9; // can be used + uint32_t : 18; // can be used uint32_t buffer_rounding : 1; uint32_t pid : 2; uint32_t delay_interrupt : 3; @@ -181,7 +179,11 @@ TU_VERIFY_STATIC( sizeof(ochi_itd_t) == CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_ typedef struct { uint16_t expected_bytes; // up to 8192 bytes so max is 13 bits + uint8_t dev_addr : 7; + uint8_t used : 1; + uint8_t ep_addr; } gtd_extra_data_t; +TU_VERIFY_STATIC( sizeof(gtd_extra_data_t) == 4, "size is not correct" ); // structure with member alignment required from large to small typedef struct TU_ATTR_ALIGNED(256) { -- cgit v1.3.1 From 915d21241c265692a5bfc1cb1d96af4521eca536 Mon Sep 17 00:00:00 2001 From: R Date: Sat, 13 Sep 2025 00:18:52 +0100 Subject: ohci: Perform explicit cache operations on TDs, buffers --- src/portable/ohci/ohci.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index b297173bc..c5b1d78e6 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -225,6 +225,8 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { #endif } + hcd_dcache_clean(&ohci_data, sizeof(ohci_data)); + // reset controller OHCI_REG->command_status_bit.controller_reset = 1; while( OHCI_REG->command_status_bit.controller_reset ) {} // should not take longer than 10 us @@ -506,12 +508,15 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet ohci_ed_t* ed = &ohci_data.control[dev_addr].ed; ohci_gtd_t *qtd = &ohci_data.control[dev_addr].gtd; + hcd_dcache_clean(setup_packet, 8); + gtd_init(qtd, (uint8_t*)(uintptr_t) setup_packet, 8); gtd_get_extra_data(qtd)->dev_addr = dev_addr; gtd_get_extra_data(qtd)->ep_addr = tu_edpt_addr(0, TUSB_DIR_OUT); qtd->pid = PID_SETUP; qtd->data_toggle = GTD_DT_DATA0; qtd->delay_interrupt = OHCI_INT_ON_COMPLETE_YES; + hcd_dcache_clean(qtd, sizeof(ohci_gtd_t)); //------------- Attach TDs list to Control Endpoint -------------// ed->td_head.address = (uint32_t) _phys_addr(qtd); @@ -528,6 +533,13 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); + // IN transfer: invalidate buffer, OUT transfer: clean buffer + if (dir) { + hcd_dcache_invalidate(buffer, buflen); + } else { + hcd_dcache_clean(buffer, buflen); + } + if ( epnum == 0 ) { ohci_ed_t* ed = &ohci_data.control[dev_addr].ed; @@ -540,6 +552,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * gtd->pid = dir ? PID_IN : PID_OUT; gtd->data_toggle = GTD_DT_DATA1; // Both Data and Ack stage start with DATA1 gtd->delay_interrupt = OHCI_INT_ON_COMPLETE_YES; + hcd_dcache_clean(gtd, sizeof(ohci_gtd_t)); ed->td_head.address = (uint32_t) _phys_addr(gtd); @@ -559,6 +572,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * TU_ASSERT(new_gtd); gtd->next = (uint32_t)_phys_addr(new_gtd); + hcd_dcache_clean(gtd, sizeof(ohci_gtd_t)); hcd_dcache_uncached(ed->td_tail) = (uint32_t)_phys_addr(new_gtd); @@ -603,6 +617,12 @@ static ohci_td_item_t* list_reverse(ohci_td_item_t* td_head) while(td_head != NULL) { td_head = _virt_addr(td_head); + // FIXME: This is not the correct object size. + // However, because we have hardcoded the assumption that + // a cache line is at least 32 bytes (in ohci.h), and + // because both types of TD structs are <= 32 bytes, this + // nonetheless still works without error. + hcd_dcache_invalidate(td_head, sizeof(ohci_td_item_t)); uint32_t next = td_head->next; // make current's item become reverse's first item -- cgit v1.3.1 From b9378eb8e79691907aae40b3fc26cb57d4ffaeb4 Mon Sep 17 00:00:00 2001 From: R Date: Sat, 13 Sep 2025 00:41:15 +0100 Subject: ohci: Use uncached alias to access EDs This code is written very carefully to always use an uncached view of memory to read/write EDs. An uncached view must *always* be used, or else cache behavior can corrupt the ED. As part of this change, combine access into as few word-sized accesses as possible. This makes the code perform better. Doing this involves giving type names to the bitfields that make up the ED's data words. --- src/portable/ohci/ohci.c | 95 ++++++++++++++++++++++++++---------------------- src/portable/ohci/ohci.h | 48 ++++++++++++++---------- 2 files changed, 79 insertions(+), 64 deletions(-) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index c5b1d78e6..a9246e1cd 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -199,9 +199,9 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { ohci_data.hcca.interrupt_table[i] = (uint32_t) _phys_addr(&ohci_data.period_head_ed); } - ohci_data.control[0].ed.skip = 1; - ohci_data.bulk_head_ed.skip = 1; - ohci_data.period_head_ed.skip = 1; + ohci_data.control[0].ed.w0.skip = 1; + ohci_data.bulk_head_ed.w0.skip = 1; + ohci_data.period_head_ed.w0.skip = 1; //If OHCI hardware is in SMM mode, gain ownership (Ref OHCI spec 5.1.1.3.3) if (OHCI_REG->control_bit.interrupt_routing == 1) @@ -300,7 +300,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) // addr0 serves as static head --> only set skip bit if ( dev_addr == 0 ) { - ohci_data.control[0].ed.skip = 1; + hcd_dcache_uncached(ohci_data.control[0].ed.w0).skip = 1; }else { // remove control @@ -323,11 +323,11 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) //--------------------------------------------------------------------+ // List Helper //--------------------------------------------------------------------+ -static inline tusb_xfer_type_t ed_get_xfer_type(ohci_ed_t const * const p_ed) +static inline tusb_xfer_type_t ed_get_xfer_type(ohci_ed_word0 w0) { - return (p_ed->ep_number == 0 ) ? TUSB_XFER_CONTROL : - (p_ed->is_iso ) ? TUSB_XFER_ISOCHRONOUS : - (p_ed->is_interrupt_xfer) ? TUSB_XFER_INTERRUPT : TUSB_XFER_BULK; + return (w0.ep_number == 0 ) ? TUSB_XFER_CONTROL : + (w0.is_iso ) ? TUSB_XFER_ISOCHRONOUS : + (w0.is_interrupt_xfer) ? TUSB_XFER_INTERRUPT : TUSB_XFER_BULK; } static void ed_init(ohci_ed_t *p_ed, uint8_t dev_addr, uint16_t ep_size, uint8_t ep_addr, uint8_t xfer_type, uint8_t interval) @@ -337,21 +337,25 @@ static void ed_init(ohci_ed_t *p_ed, uint8_t dev_addr, uint16_t ep_size, uint8_t // address 0 is used as async head, which always on the list --> cannot be cleared if (dev_addr != 0) { - tu_memclr(p_ed, sizeof(ohci_ed_t)); + hcd_dcache_uncached(p_ed->td_tail) = 0; + hcd_dcache_uncached(p_ed->td_head).address = 0; + hcd_dcache_uncached(p_ed->next) = 0; } tuh_bus_info_t bus_info; tuh_bus_info_get(dev_addr, &bus_info); - p_ed->dev_addr = dev_addr; - p_ed->ep_number = ep_addr & 0x0F; - p_ed->pid = (xfer_type == TUSB_XFER_CONTROL) ? PID_FROM_TD : (tu_edpt_dir(ep_addr) ? PID_IN : PID_OUT); - p_ed->speed = bus_info.speed; - p_ed->is_iso = (xfer_type == TUSB_XFER_ISOCHRONOUS) ? 1 : 0; - p_ed->max_packet_size = ep_size; - - p_ed->used = 1; - p_ed->is_interrupt_xfer = (xfer_type == TUSB_XFER_INTERRUPT ? 1 : 0); + ohci_ed_word0 w0 = {.u = 0}; + w0.dev_addr = dev_addr; + w0.ep_number = ep_addr & 0x0F; + w0.pid = (xfer_type == TUSB_XFER_CONTROL) ? PID_FROM_TD : (tu_edpt_dir(ep_addr) ? PID_IN : PID_OUT); + w0.speed = bus_info.speed; + w0.is_iso = (xfer_type == TUSB_XFER_ISOCHRONOUS) ? 1 : 0; + w0.max_packet_size = ep_size; + + w0.used = 1; + w0.is_interrupt_xfer = (xfer_type == TUSB_XFER_INTERRUPT ? 1 : 0); + hcd_dcache_uncached(p_ed->w0) = w0; } static void gtd_init(ohci_gtd_t *p_td, uint8_t *data_ptr, uint16_t total_bytes) { @@ -381,8 +385,9 @@ static ohci_ed_t * ed_from_addr(uint8_t dev_addr, uint8_t ep_addr) for(uint32_t i=0; inext = p_pre->next; - p_pre->next = (uint32_t) _phys_addr(p_ed); + hcd_dcache_uncached(p_ed->next) = hcd_dcache_uncached(p_pre->next); + hcd_dcache_uncached(p_pre->next) = (uint32_t) _phys_addr(p_ed); } static void ed_list_remove_by_addr(ohci_ed_t * p_head, uint8_t dev_addr) { ohci_ed_t* p_prev = p_head; - while( p_prev->next ) + uint32_t ed_pa; + while( (ed_pa = hcd_dcache_uncached(p_prev->next)) ) { - ohci_ed_t* ed = (ohci_ed_t*) _virt_addr((void *)p_prev->next); + ohci_ed_t* ed = (ohci_ed_t*) _virt_addr((void *)ed_pa); - if (ed->dev_addr == dev_addr) + if (hcd_dcache_uncached(ed->w0).dev_addr == dev_addr) { // Prevent Host Controller from processing this ED while we remove it - ed->skip = 1; + hcd_dcache_uncached(ed->w0).skip = 1; // unlink ed, will also move up p_prev - p_prev->next = ed->next; + hcd_dcache_uncached(p_prev->next) = hcd_dcache_uncached(ed->next); // point the removed ED's next pointer to list head to make sure HC can always safely move away from this ED - ed->next = (uint32_t) _phys_addr(p_head); - ed->used = 0; - ed->skip = 0; + hcd_dcache_uncached(ed->next) = (uint32_t) _phys_addr(p_head); + ohci_ed_word0 w0 = hcd_dcache_uncached(ed->w0); + w0.used = 0; + w0.skip = 0; + hcd_dcache_uncached(ed->w0) = w0; }else { - p_prev = (ohci_ed_t*) _virt_addr((void *)p_prev->next); + p_prev = (ohci_ed_t*) _virt_addr((void *)ed_pa); } } } @@ -477,7 +485,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const // control of dev0 is used as static async head if ( dev_addr == 0 ) { - p_ed->skip = 0; // only need to clear skip bit + hcd_dcache_uncached(p_ed->w0).skip = 0; // only need to clear skip bit return true; } @@ -519,7 +527,7 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet hcd_dcache_clean(qtd, sizeof(ohci_gtd_t)); //------------- Attach TDs list to Control Endpoint -------------// - ed->td_head.address = (uint32_t) _phys_addr(qtd); + hcd_dcache_uncached(ed->td_head.address) = (uint32_t) _phys_addr(qtd); OHCI_REG->command_status_bit.control_list_filled = 1; @@ -554,12 +562,13 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * gtd->delay_interrupt = OHCI_INT_ON_COMPLETE_YES; hcd_dcache_clean(gtd, sizeof(ohci_gtd_t)); - ed->td_head.address = (uint32_t) _phys_addr(gtd); + hcd_dcache_uncached(ed->td_head).address = (uint32_t) _phys_addr(gtd); OHCI_REG->command_status_bit.control_list_filled = 1; }else { ohci_ed_t * ed = ed_from_addr(dev_addr, ep_addr); + tusb_xfer_type_t xfer_type = ed_get_xfer_type( hcd_dcache_uncached(ed->w0) ); ohci_gtd_t *gtd = (ohci_gtd_t *)_virt_addr((void *)hcd_dcache_uncached(ed->td_tail)); gtd_init(gtd, buffer, buflen); @@ -576,7 +585,6 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * hcd_dcache_uncached(ed->td_tail) = (uint32_t)_phys_addr(new_gtd); - tusb_xfer_type_t xfer_type = ed_get_xfer_type( ed_from_addr(dev_addr, ep_addr) ); if (TUSB_XFER_BULK == xfer_type) OHCI_REG->command_status_bit.bulk_list_filled = 1; } @@ -595,13 +603,12 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { (void) rhport; ohci_ed_t * const p_ed = ed_from_addr(dev_addr, ep_addr); - p_ed->is_stalled = 0; - p_ed->td_tail &= 0x0Ful; // set tail pointer back to NULL - - p_ed->td_head.toggle = 0; // reset data toggle - p_ed->td_head.halted = 0; + ohci_ed_td_head td_head = hcd_dcache_uncached(p_ed->td_head); + td_head.toggle = 0; // reset data toggle + td_head.halted = 0; + hcd_dcache_uncached(p_ed->td_head) = td_head; - if ( TUSB_XFER_BULK == ed_get_xfer_type(p_ed) ) OHCI_REG->command_status_bit.bulk_list_filled = 1; + if ( TUSB_XFER_BULK == ed_get_xfer_type(hcd_dcache_uncached(p_ed->w0)) ) OHCI_REG->command_status_bit.bulk_list_filled = 1; return true; } @@ -665,8 +672,8 @@ static void done_queue_isr(uint8_t hostid) (void) hostid; // done head is written in reversed order of completion --> need to reverse the done queue first - ohci_td_item_t* td_head = list_reverse ( (ohci_td_item_t*) tu_align16(ohci_data.hcca.done_head) ); - ohci_data.hcca.done_head = 0; + ohci_td_item_t* td_head = list_reverse ( (ohci_td_item_t*) tu_align16(hcd_dcache_uncached(ohci_data.hcca).done_head) ); + hcd_dcache_uncached(ohci_data.hcca).done_head = 0; while( td_head != NULL ) { diff --git a/src/portable/ohci/ohci.h b/src/portable/ohci/ohci.h index 8483686fa..78cac664e 100644 --- a/src/portable/ohci/ohci.h +++ b/src/portable/ohci/ohci.h @@ -117,34 +117,42 @@ typedef struct TU_ATTR_ALIGNED(CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LI TU_VERIFY_STATIC( sizeof(ohci_gtd_t) == CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 16, "size is not correct" ); +typedef union { + struct { + uint32_t dev_addr : 7; + uint32_t ep_number : 4; + uint32_t pid : 2; + uint32_t speed : 1; + uint32_t skip : 1; + uint32_t is_iso : 1; + uint32_t max_packet_size : 11; + // HCD: make use of 5 reserved bits + uint32_t used : 1; + uint32_t is_interrupt_xfer : 1; + uint32_t : 3; + }; + uint32_t u; +} ohci_ed_word0; + +typedef union { + uint32_t address; + struct { + uint32_t halted : 1; + uint32_t toggle : 1; + uint32_t : 30; + }; +} ohci_ed_td_head; + typedef struct TU_ATTR_ALIGNED(16) { // Word 0 - uint32_t dev_addr : 7; - uint32_t ep_number : 4; - uint32_t pid : 2; - uint32_t speed : 1; - uint32_t skip : 1; - uint32_t is_iso : 1; - uint32_t max_packet_size : 11; - // HCD: make use of 5 reserved bits - uint32_t used : 1; - uint32_t is_interrupt_xfer : 1; - uint32_t is_stalled : 1; - uint32_t : 2; + ohci_ed_word0 w0; // Word 1 uint32_t td_tail; // Word 2 - volatile union { - uint32_t address; - struct { - uint32_t halted : 1; - uint32_t toggle : 1; - uint32_t : 30; - }; - }td_head; + volatile ohci_ed_td_head td_head; // Word 3: next ED uint32_t next; -- cgit v1.3.1 From 24bc2ff57a7adeec04562bbc4fd1f3bed8df25fe Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 27 Sep 2025 14:57:14 +0200 Subject: Add UAC1.0 defines Signed-off-by: HiFiPhile --- src/device/usbd.h | 66 +++++++++++++++++++++++++++---------------------------- 1 file changed, 33 insertions(+), 33 deletions(-) diff --git a/src/device/usbd.h b/src/device/usbd.h index e5a848809..3e97a3482 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -311,7 +311,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Audio Control (AC) Interface */\ 9, TUSB_DESC_INTERFACE, _itfnum, 0, 0, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_CONTROL, AUDIO_FUNC_PROTOCOL_CODE_UNDEF, _stridx,\ /* AC Header */\ - 9, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(0x0100), U16_TO_U8S_LE(0x0009), 1, (uint8_t)((_itfnum) + 1),\ + 9, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(0x0100), U16_TO_U8S_LE(0x0009), 1, (uint8_t)((_itfnum) + 1),\ /* MIDI Streaming (MS) Interface */\ 9, TUSB_DESC_INTERFACE, (uint8_t)((_itfnum) + 1), 0, 2, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_MIDI_STREAMING, AUDIO_FUNC_PROTOCOL_CODE_UNDEF, 0,\ /* MS Header */\ @@ -379,38 +379,38 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Class-Specific AC Interface Header Descriptor(4.7.2) */ #define TUD_AUDIO_DESC_CS_AC_LEN 9 -#define TUD_AUDIO_DESC_CS_AC(_bcdADC, _category, _totallen, _ctrl) /* _bcdADC : Audio Device Class Specification Release Number in Binary-Coded Decimal, _category : see audio_function_t, _totallen : Total number of bytes returned for the class-specific AudioControl interface i.e. Clock Source, Unit and Terminal descriptors - Do not include TUD_AUDIO_DESC_CS_AC_LEN, we already do this here*/ \ - TUD_AUDIO_DESC_CS_AC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(_bcdADC), _category, U16_TO_U8S_LE(_totallen + TUD_AUDIO_DESC_CS_AC_LEN), _ctrl +#define TUD_AUDIO_DESC_CS_AC(_bcdADC, _category, _totallen, _ctrl) /* _bcdADC : Audio Device Class Specification Release Number in Binary-Coded Decimal, _category : see audio20_function_t, _totallen : Total number of bytes returned for the class-specific AudioControl interface i.e. Clock Source, Unit and Terminal descriptors - Do not include TUD_AUDIO_DESC_CS_AC_LEN, we already do this here*/ \ + TUD_AUDIO_DESC_CS_AC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(_bcdADC), _category, U16_TO_U8S_LE(_totallen + TUD_AUDIO_DESC_CS_AC_LEN), _ctrl /* Clock Source Descriptor(4.7.2.1) */ #define TUD_AUDIO_DESC_CLK_SRC_LEN 8 #define TUD_AUDIO_DESC_CLK_SRC(_clkid, _attr, _ctrl, _assocTerm, _stridx) \ - TUD_AUDIO_DESC_CLK_SRC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AC_INTERFACE_CLOCK_SOURCE, _clkid, _attr, _ctrl, _assocTerm, _stridx + TUD_AUDIO_DESC_CLK_SRC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE, _clkid, _attr, _ctrl, _assocTerm, _stridx /* Input Terminal Descriptor(4.7.2.4) */ #define TUD_AUDIO_DESC_INPUT_TERM_LEN 17 #define TUD_AUDIO_DESC_INPUT_TERM(_termid, _termtype, _assocTerm, _clkid, _nchannelslogical, _channelcfg, _idxchannelnames, _ctrl, _stridx) \ - TUD_AUDIO_DESC_INPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AC_INTERFACE_INPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _clkid, _nchannelslogical, U32_TO_U8S_LE(_channelcfg), _idxchannelnames, U16_TO_U8S_LE(_ctrl), _stridx + TUD_AUDIO_DESC_INPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _clkid, _nchannelslogical, U32_TO_U8S_LE(_channelcfg), _idxchannelnames, U16_TO_U8S_LE(_ctrl), _stridx /* Output Terminal Descriptor(4.7.2.5) */ #define TUD_AUDIO_DESC_OUTPUT_TERM_LEN 12 #define TUD_AUDIO_DESC_OUTPUT_TERM(_termid, _termtype, _assocTerm, _srcid, _clkid, _ctrl, _stridx) \ - TUD_AUDIO_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _clkid, U16_TO_U8S_LE(_ctrl), _stridx + TUD_AUDIO_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _clkid, U16_TO_U8S_LE(_ctrl), _stridx /* Feature Unit Descriptor(4.7.2.8) */ // 1 - Channel #define TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN 6+(1+1)*4 #define TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(_unitid, _srcid, _ctrlch0master, _ctrlch1, _stridx) \ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), _stridx + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), _stridx // 2 - Channels #define TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN (6+(2+1)*4) #define TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(_unitid, _srcid, _ctrlch0master, _ctrlch1, _ctrlch2, _stridx) \ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), U32_TO_U8S_LE(_ctrlch2), _stridx + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), U32_TO_U8S_LE(_ctrlch2), _stridx // 4 - Channels #define TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN (6+(4+1)*4) #define TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL(_unitid, _srcid, _ctrlch0master, _ctrlch1, _ctrlch2, _ctrlch3, _ctrlch4, _stridx) \ - TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), U32_TO_U8S_LE(_ctrlch2), U32_TO_U8S_LE(_ctrlch3), U32_TO_U8S_LE(_ctrlch4), _stridx + TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), U32_TO_U8S_LE(_ctrlch2), U32_TO_U8S_LE(_ctrlch3), U32_TO_U8S_LE(_ctrlch4), _stridx // For more channels, add definitions here @@ -427,12 +427,12 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Class-Specific AS Interface Descriptor(4.9.2) */ #define TUD_AUDIO_DESC_CS_AS_INT_LEN 16 #define TUD_AUDIO_DESC_CS_AS_INT(_termid, _ctrl, _formattype, _formats, _nchannelsphysical, _channelcfg, _stridx) \ - TUD_AUDIO_DESC_CS_AS_INT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AS_INTERFACE_AS_GENERAL, _termid, _ctrl, _formattype, U32_TO_U8S_LE(_formats), _nchannelsphysical, U32_TO_U8S_LE(_channelcfg), _stridx + TUD_AUDIO_DESC_CS_AS_INT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_AS_GENERAL, _termid, _ctrl, _formattype, U32_TO_U8S_LE(_formats), _nchannelsphysical, U32_TO_U8S_LE(_channelcfg), _stridx /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */ #define TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN 6 #define TUD_AUDIO_DESC_TYPE_I_FORMAT(_subslotsize, _bitresolution) /* _subslotsize is number of bytes per sample (i.e. subslot) and can be 1,2,3, or 4 */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO_CS_AS_INTERFACE_FORMAT_TYPE, AUDIO_FORMAT_TYPE_I, _subslotsize, _bitresolution + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE, AUDIO20_FORMAT_TYPE_I, _subslotsize, _bitresolution /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */ #define TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN 7 @@ -442,7 +442,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */ #define TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN 8 #define TUD_AUDIO_DESC_CS_AS_ISO_EP(_attr, _ctrl, _lockdelayunit, _lockdelay) \ - TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO_CS_EP_SUBTYPE_GENERAL, _attr, _ctrl, _lockdelayunit, U16_TO_U8S_LE(_lockdelay) + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO20_CS_EP_SUBTYPE_GENERAL, _attr, _ctrl, _lockdelayunit, U16_TO_U8S_LE(_lockdelay) /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */ #define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN 7 @@ -474,15 +474,15 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO_CTRL_R << AUDIO_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ @@ -490,13 +490,13 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) // AUDIO simple descriptor (UAC2) for 4 microphone input // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal, 1 Clock Source @@ -523,15 +523,15 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO_CTRL_R << AUDIO_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x04, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch3*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch4*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch3*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch4*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ @@ -539,13 +539,13 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x04, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) // AUDIO simple descriptor (UAC2) for mono speaker // - 1 Input Terminal, 2 Feature Unit (Mute and Volume Control), 3 Output Terminal, 4 Clock Source @@ -571,15 +571,15 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO_CTRL_R << AUDIO_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ @@ -587,13 +587,13 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ 1) -- cgit v1.3.1 From 78121a8d3f273420f8a2798364c2dd2fb9bb700f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 27 Sep 2025 14:58:08 +0200 Subject: Update UAC2 naming Signed-off-by: HiFiPhile --- examples/device/audio_4_channel_mic/src/main.c | 47 +- .../device/audio_4_channel_mic_freertos/src/main.c | 44 +- examples/device/audio_test/src/main.c | 46 +- examples/device/audio_test_freertos/src/main.c | 46 +- examples/device/audio_test_multi_rate/src/main.c | 50 +- .../audio_test_multi_rate/src/usb_descriptors.h | 18 +- examples/device/cdc_uac2/src/uac2_app.c | 64 +- examples/device/cdc_uac2/src/usb_descriptors.h | 28 +- examples/device/uac2_headset/src/main.c | 70 +- examples/device/uac2_headset/src/usb_descriptors.h | 28 +- examples/device/uac2_speaker_fb/src/main.c | 64 +- .../device/uac2_speaker_fb/src/usb_descriptors.h | 14 +- src/class/audio/audio.h | 1304 +++++++++++++------- src/class/audio/audio_device.c | 30 +- src/class/audio/audio_device.h | 6 +- src/class/midi/midi_host.c | 4 +- 16 files changed, 1119 insertions(+), 744 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 3e0f03a20..de9e8a06a 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -66,8 +66,8 @@ uint32_t sampFreq; uint8_t clkValid; // Range states -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state -audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX * CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE / 1000]; @@ -171,7 +171,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -191,7 +191,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -218,25 +218,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -297,13 +297,13 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == 1) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; - ret.bmChannelConfig = (audio_channel_config_t) 0; + ret.bmChannelConfig = (audio20_channel_config_t) 0; ret.iChannelNames = 0; TU_LOG2(" Get terminal connector\r\n"); @@ -321,24 +321,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); return tud_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) - ret; + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; ret.subrange[0].bMin = -90;// -90 dB @@ -364,15 +363,15 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == 4) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Sample Freq.\r\n"); // Buffered control transfer is needed for IN flow control to work return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Sample Freq. range\r\n"); return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); @@ -383,7 +382,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG2(" Get Sample Freq. valid\r\n"); return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index 96eca0be9..4572bbb3c 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -102,8 +102,8 @@ uint32_t sampFreq; uint8_t clkValid; // Range states -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state -audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX * CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE / 1000]; @@ -245,7 +245,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -265,7 +265,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -292,25 +292,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG1(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG1(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -368,9 +368,9 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == 1) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; @@ -392,23 +392,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG1(" Get Mute of channel: %u\r\n", channelNum); return tud_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG1(" Get Volume of channel: %u\r\n", channelNum); return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG1(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) ret; + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; ret.subrange[0].bMin = -90;// -90 dB @@ -434,15 +434,15 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == 4) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG1(" Get Sample Freq.\r\n"); // Buffered control transfer is needed for IN flow control to work return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG1(" Get Sample Freq. range\r\n"); return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); @@ -453,7 +453,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG1(" Get Sample Freq. valid\r\n"); return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index 5b3beec24..875d0b7f0 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -63,8 +63,8 @@ uint32_t sampFreq; uint8_t clkValid; // Range states -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state -audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state // Audio test data uint16_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE / 1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / 2]; @@ -157,7 +157,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -177,7 +177,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -204,25 +204,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -283,13 +283,13 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == 1) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; - ret.bmChannelConfig = (audio_channel_config_t) 0; + ret.bmChannelConfig = (audio20_channel_config_t) 0; ret.iChannelNames = 0; TU_LOG2(" Get terminal connector\r\n"); @@ -307,23 +307,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; @@ -350,14 +350,14 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == 4) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Sample Freq.\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Sample Freq. range\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); @@ -368,7 +368,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG2(" Get Sample Freq. valid\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index 1eab5dab8..cf2fb74d1 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -100,8 +100,8 @@ uint32_t sampFreq; uint8_t clkValid; // Range states -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state -audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state // Audio test data uint16_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE / 1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / 2]; @@ -231,7 +231,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -251,7 +251,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -278,25 +278,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG1(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG1(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -354,13 +354,13 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == 1) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; - ret.bmChannelConfig = (audio_channel_config_t) 0; + ret.bmChannelConfig = (audio20_channel_config_t) 0; ret.iChannelNames = 0; TU_LOG1(" Get terminal connector\r\n"); @@ -378,23 +378,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG1(" Get Mute of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG1(" Get Volume of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG1(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; @@ -421,14 +421,14 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == 4) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG1(" Get Sample Freq.\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG1(" Get Sample Freq. range\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); @@ -439,7 +439,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG1(" Get Sample Freq. valid\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 9d467991e..2e8a1dba5 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -80,7 +80,7 @@ static const uint8_t bytesPerSampleAltList[CFG_TUD_AUDIO_FUNC_1_N_FORMATS] = CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, }; -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state // Audio test data @@ -195,7 +195,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -215,7 +215,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -242,25 +242,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == UAC2_ENTITY_FEATURE_UNIT) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -275,10 +275,10 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == UAC2_ENTITY_CLOCK) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_4_t)); + case AUDIO20_CS_CTRL_SAM_FREQ: + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_4_t)); - sampFreq = (uint32_t) ((audio_control_cur_4_t *) pBuff)->bCur; + sampFreq = (uint32_t) ((audio20_control_cur_4_t *) pBuff)->bCur; TU_LOG2("Clock set current freq: %" PRIu32 "\r\n", sampFreq); @@ -342,9 +342,9 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == UAC2_ENTITY_INPUT_TERMINAL) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; @@ -366,23 +366,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == UAC2_ENTITY_FEATURE_UNIT) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; @@ -409,16 +409,16 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == UAC2_ENTITY_CLOCK) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Sample Freq.\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: { + case AUDIO20_CS_REQ_RANGE: { TU_LOG2(" Get Sample Freq. range\r\n"); - audio_control_range_4_n_t(N_sampleRates) rangef = + audio20_control_range_4_n_t(N_sampleRates) rangef = { .wNumSubRanges = tu_htole16(N_sampleRates)}; TU_LOG1("Clock get %d freq ranges\r\n", N_sampleRates); @@ -437,7 +437,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG2(" Get Sample Freq. valid\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index 8381e31f5..277b22d7b 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -64,15 +64,15 @@ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ AUDIO_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ AUDIO_CTRL_RW << AUDIO_CLOCK_SOURCE_CTRL_CLK_FRQ_POS | AUDIO_CTRL_R << AUDIO_CLOCK_SOURCE_CTRL_CLK_VAL_POS, /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS | AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS, /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ UAC2_ENTITY_FEATURE_UNIT, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ UAC2_ENTITY_FEATURE_UNIT, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ @@ -80,23 +80,23 @@ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index a1a0dd73d..cb7b716e8 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -80,22 +80,22 @@ void audio_task(void) { } // Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t const *request) +static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { - if (request->bRequest == AUDIO_CS_REQ_CUR) + if (request->bRequest == AUDIO20_CS_REQ_CUR) { TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); - audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; + audio20_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); } - else if (request->bRequest == AUDIO_CS_REQ_RANGE) + else if (request->bRequest == AUDIO20_CS_REQ_RANGE) { - audio_control_range_4_n_t(N_SAMPLE_RATES) rangef = + audio20_control_range_4_n_t(N_SAMPLE_RATES) rangef = { .wNumSubRanges = tu_htole16(N_SAMPLE_RATES) }; @@ -111,10 +111,10 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &rangef, sizeof(rangef)); } } - else if (request->bControlSelector == AUDIO_CS_CTRL_CLK_VALID && - request->bRequest == AUDIO_CS_REQ_CUR) + else if (request->bControlSelector == AUDIO20_CS_CTRL_CLK_VALID && + request->bRequest == AUDIO20_CS_REQ_CUR) { - audio_control_cur_1_t cur_valid = { .bCur = 1 }; + audio20_control_cur_1_t cur_valid = { .bCur = 1 }; TU_LOG1("Clock get is valid %u\r\n", cur_valid.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_valid, sizeof(cur_valid)); } @@ -124,18 +124,18 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t } // Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) +static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void)rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t)); + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_4_t)); - current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; + current_sample_rate = (uint32_t) ((audio20_control_cur_4_t const *)buf)->bCur; TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); @@ -150,21 +150,21 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t } // Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_request_t const *request) +static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE && request->bRequest == AUDIO_CS_REQ_CUR) + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { - audio_control_cur_1_t mute1 = { .bCur = mute[request->bChannelNumber] }; + audio20_control_cur_1_t mute1 = { .bCur = mute[request->bChannelNumber] }; TU_LOG1("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &mute1, sizeof(mute1)); } - else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) + else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { - if (request->bRequest == AUDIO_CS_REQ_RANGE) + if (request->bRequest == AUDIO20_CS_REQ_RANGE) { - audio_control_range_2_n_t(1) range_vol = { + audio20_control_range_2_n_t(1) range_vol = { .wNumSubRanges = tu_htole16(1), .subrange[0] = { .bMin = tu_htole16(-VOLUME_CTRL_50_DB), tu_htole16(VOLUME_CTRL_0_DB), tu_htole16(256) } }; @@ -172,9 +172,9 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req range_vol.subrange[0].bMin / 256, range_vol.subrange[0].bMax / 256, range_vol.subrange[0].bRes / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &range_vol, sizeof(range_vol)); } - else if (request->bRequest == AUDIO_CS_REQ_CUR) + else if (request->bRequest == AUDIO20_CS_REQ_CUR) { - audio_control_cur_2_t cur_vol = { .bCur = tu_htole16(volume[request->bChannelNumber]) }; + audio20_control_cur_2_t cur_vol = { .bCur = tu_htole16(volume[request->bChannelNumber]) }; TU_LOG1("Get channel %u volume %d dB\r\n", request->bChannelNumber, cur_vol.bCur / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_vol, sizeof(cur_vol)); } @@ -186,28 +186,28 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req } // Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) +static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void)rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE) + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_1_t)); - mute[request->bChannelNumber] = ((audio_control_cur_1_t const *)buf)->bCur; + mute[request->bChannelNumber] = ((audio20_control_cur_1_t const *)buf)->bCur; TU_LOG1("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]); return true; } - else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) + else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_2_t)); - volume[request->bChannelNumber] = ((audio_control_cur_2_t const *)buf)->bCur; + volume[request->bChannelNumber] = ((audio20_control_cur_2_t const *)buf)->bCur; TU_LOG1("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256); @@ -228,7 +228,7 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_req // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - audio_control_request_t const *request = (audio_control_request_t const *)p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *)p_request; if (request->bEntityID == UAC2_ENTITY_CLOCK) return tud_audio_clock_get_request(rhport, request); @@ -245,7 +245,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Invoked when audio class specific set request received for an entity bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { - audio_control_request_t const *request = (audio_control_request_t const *)p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *)p_request; if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) return tud_audio_feature_unit_set_request(rhport, request, buf); diff --git a/examples/device/cdc_uac2/src/usb_descriptors.h b/examples/device/cdc_uac2/src/usb_descriptors.h index 736feeefe..efffbc0bb 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.h +++ b/examples/device/cdc_uac2/src/usb_descriptors.h @@ -93,19 +93,19 @@ enum /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ @@ -113,23 +113,23 @@ enum /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ @@ -137,22 +137,22 @@ enum /* Interface 2, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 102a6eef1..602225df5 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -142,17 +142,17 @@ void tud_resume_cb(void) { } // Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t const *request) { +static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { - if (request->bRequest == AUDIO_CS_REQ_CUR) { + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { + if (request->bRequest == AUDIO20_CS_REQ_CUR) { TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); - audio_control_cur_4_t curf = {(int32_t) tu_htole32(current_sample_rate)}; + audio20_control_cur_4_t curf = {(int32_t) tu_htole32(current_sample_rate)}; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &curf, sizeof(curf)); - } else if (request->bRequest == AUDIO_CS_REQ_RANGE) { - audio_control_range_4_n_t(N_SAMPLE_RATES) rangef = + } else if (request->bRequest == AUDIO20_CS_REQ_RANGE) { + audio20_control_range_4_n_t(N_SAMPLE_RATES) rangef = { .wNumSubRanges = tu_htole16(N_SAMPLE_RATES)}; TU_LOG1("Clock get %d freq ranges\r\n", N_SAMPLE_RATES); @@ -165,9 +165,9 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &rangef, sizeof(rangef)); } - } else if (request->bControlSelector == AUDIO_CS_CTRL_CLK_VALID && - request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_1_t cur_valid = {.bCur = 1}; + } else if (request->bControlSelector == AUDIO20_CS_CTRL_CLK_VALID && + request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_1_t cur_valid = {.bCur = 1}; TU_LOG1("Clock get is valid %u\r\n", cur_valid.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &cur_valid, sizeof(cur_valid)); } @@ -177,16 +177,16 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t } // Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t)); + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_4_t)); - current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *) buf)->bCur; + current_sample_rate = (uint32_t) ((audio20_control_cur_4_t const *) buf)->bCur; TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); @@ -199,23 +199,23 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t } // Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_request_t const *request) { +static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE && request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_1_t mute1 = {.bCur = mute[request->bChannelNumber]}; + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_1_t mute1 = {.bCur = mute[request->bChannelNumber]}; TU_LOG1("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &mute1, sizeof(mute1)); - } else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) { - if (request->bRequest == AUDIO_CS_REQ_RANGE) { - audio_control_range_2_n_t(1) range_vol = { + } else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { + if (request->bRequest == AUDIO20_CS_REQ_RANGE) { + audio20_control_range_2_n_t(1) range_vol = { .wNumSubRanges = tu_htole16(1), .subrange[0] = {.bMin = tu_htole16(-VOLUME_CTRL_50_DB), tu_htole16(VOLUME_CTRL_0_DB), tu_htole16(256)}}; TU_LOG1("Get channel %u volume range (%d, %d, %u) dB\r\n", request->bChannelNumber, range_vol.subrange[0].bMin / 256, range_vol.subrange[0].bMax / 256, range_vol.subrange[0].bRes / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &range_vol, sizeof(range_vol)); - } else if (request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_2_t cur_vol = {.bCur = tu_htole16(volume[request->bChannelNumber])}; + } else if (request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_2_t cur_vol = {.bCur = tu_htole16(volume[request->bChannelNumber])}; TU_LOG1("Get channel %u volume %d dB\r\n", request->bChannelNumber, cur_vol.bCur / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &cur_vol, sizeof(cur_vol)); } @@ -227,24 +227,24 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req } // Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_1_t)); + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_1_t)); - mute[request->bChannelNumber] = ((audio_control_cur_1_t const *) buf)->bCur; + mute[request->bChannelNumber] = ((audio20_control_cur_1_t const *) buf)->bCur; TU_LOG1("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]); return true; - } else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_2_t)); + } else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_2_t)); - volume[request->bChannelNumber] = ((audio_control_cur_2_t const *) buf)->bCur; + volume[request->bChannelNumber] = ((audio20_control_cur_2_t const *) buf)->bCur; TU_LOG1("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256); @@ -262,7 +262,7 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_req // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - audio_control_request_t const *request = (audio_control_request_t const *) p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_CLOCK) return tud_audio_clock_get_request(rhport, request); @@ -277,7 +277,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Invoked when audio class specific set request received for an entity bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { - audio_control_request_t const *request = (audio_control_request_t const *) p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) return tud_audio_feature_unit_set_request(rhport, request, buf); @@ -387,11 +387,11 @@ void audio_control_task(void) { } // 6.1 Interrupt Data Message - const audio_interrupt_data_t data = { + const audio20_interrupt_data_t data = { .bInfo = 0, // Class-specific interrupt, originated from an interface - .bAttribute = AUDIO_CS_REQ_CUR, // Caused by current settings + .bAttribute = AUDIO20_CS_REQ_CUR, // Caused by current settings .wValue_cn_or_mcn = 0, // CH0: master volume - .wValue_cs = AUDIO_FU_CTRL_VOLUME, // Volume change + .wValue_cs = AUDIO20_FU_CTRL_VOLUME, // Volume change .wIndex_ep_or_int = 0, // From the interface itself .wIndex_entity_id = UAC2_ENTITY_SPK_FEATURE_UNIT,// From feature unit }; diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index da0da83e8..4138b5654 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -91,19 +91,19 @@ enum /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */\ TUD_AUDIO_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ /* Standard AS Interface Descriptor(4.9.1) */\ @@ -113,23 +113,23 @@ enum /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ @@ -137,22 +137,22 @@ enum /* Interface 2, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index ed9e7716d..2e525ef28 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -154,17 +154,17 @@ void tud_resume_cb(void) { //--------------------------------------------------------------------+ // Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t const *request) { +static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { - if (request->bRequest == AUDIO_CS_REQ_CUR) { + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { + if (request->bRequest == AUDIO20_CS_REQ_CUR) { TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); - audio_control_cur_4_t curf = {(int32_t) tu_htole32(current_sample_rate)}; + audio20_control_cur_4_t curf = {(int32_t) tu_htole32(current_sample_rate)}; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &curf, sizeof(curf)); - } else if (request->bRequest == AUDIO_CS_REQ_RANGE) { - audio_control_range_4_n_t(N_SAMPLE_RATES) rangef = + } else if (request->bRequest == AUDIO20_CS_REQ_RANGE) { + audio20_control_range_4_n_t(N_SAMPLE_RATES) rangef = { .wNumSubRanges = tu_htole16(N_SAMPLE_RATES)}; TU_LOG1("Clock get %d freq ranges\r\n", N_SAMPLE_RATES); @@ -177,9 +177,9 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &rangef, sizeof(rangef)); } - } else if (request->bControlSelector == AUDIO_CS_CTRL_CLK_VALID && - request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_1_t cur_valid = {.bCur = 1}; + } else if (request->bControlSelector == AUDIO20_CS_CTRL_CLK_VALID && + request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_1_t cur_valid = {.bCur = 1}; TU_LOG1("Clock get is valid %u\r\n", cur_valid.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &cur_valid, sizeof(cur_valid)); } @@ -189,16 +189,16 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t } // Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t)); + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_4_t)); - current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *) buf)->bCur; + current_sample_rate = (uint32_t) ((audio20_control_cur_4_t const *) buf)->bCur; TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); @@ -211,23 +211,23 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t } // Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_request_t const *request) { +static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_FEATURE_UNIT); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE && request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_1_t mute1 = {.bCur = mute[request->bChannelNumber]}; + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_1_t mute1 = {.bCur = mute[request->bChannelNumber]}; TU_LOG1("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &mute1, sizeof(mute1)); - } else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) { - if (request->bRequest == AUDIO_CS_REQ_RANGE) { - audio_control_range_2_n_t(1) range_vol = { + } else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { + if (request->bRequest == AUDIO20_CS_REQ_RANGE) { + audio20_control_range_2_n_t(1) range_vol = { .wNumSubRanges = tu_htole16(1), .subrange[0] = {.bMin = tu_htole16(-VOLUME_CTRL_50_DB), tu_htole16(VOLUME_CTRL_0_DB), tu_htole16(256)}}; TU_LOG1("Get channel %u volume range (%d, %d, %u) dB\r\n", request->bChannelNumber, range_vol.subrange[0].bMin / 256, range_vol.subrange[0].bMax / 256, range_vol.subrange[0].bRes / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &range_vol, sizeof(range_vol)); - } else if (request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_2_t cur_vol = {.bCur = tu_htole16(volume[request->bChannelNumber])}; + } else if (request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_2_t cur_vol = {.bCur = tu_htole16(volume[request->bChannelNumber])}; TU_LOG1("Get channel %u volume %d dB\r\n", request->bChannelNumber, cur_vol.bCur / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &cur_vol, sizeof(cur_vol)); } @@ -239,24 +239,24 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req } // Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_FEATURE_UNIT); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_1_t)); + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_1_t)); - mute[request->bChannelNumber] = ((audio_control_cur_1_t const *) buf)->bCur; + mute[request->bChannelNumber] = ((audio20_control_cur_1_t const *) buf)->bCur; TU_LOG1("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]); return true; - } else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_2_t)); + } else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_2_t)); - volume[request->bChannelNumber] = ((audio_control_cur_2_t const *) buf)->bCur; + volume[request->bChannelNumber] = ((audio20_control_cur_2_t const *) buf)->bCur; TU_LOG1("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256); @@ -270,7 +270,7 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_req // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - audio_control_request_t const *request = (audio_control_request_t const *) p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_CLOCK) return tud_audio_clock_get_request(rhport, request); @@ -285,7 +285,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Invoked when audio class specific set request received for an entity bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { - audio_control_request_t const *request = (audio_control_request_t const *) p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_FEATURE_UNIT) return tud_audio_feature_unit_set_request(rhport, request, buf); diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index 9511bf797..005aebeef 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -53,15 +53,15 @@ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ (AUDIO_CTRL_RW << AUDIO_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ (AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS,/*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS,/*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ @@ -69,13 +69,13 @@ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 4 : 1)\ diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index 0d1acadcc..7c4c85306 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -39,7 +39,9 @@ extern "C" { #endif -/// Audio Device Class Codes +//--------------------------------------------------------------------+ +// GENERIC AUDIO CLASS CODES (COMMON TO UAC1 AND UAC2) +//--------------------------------------------------------------------+ /// A.2 - Audio Function Subclass Codes typedef enum @@ -51,6 +53,7 @@ typedef enum typedef enum { AUDIO_FUNC_PROTOCOL_CODE_UNDEF = 0x00, + AUDIO_FUNC_PROTOCOL_CODE_V1 = 0x00, ///< Version 1.0 - same as undefined for backward compatibility AUDIO_FUNC_PROTOCOL_CODE_V2 = 0x20, ///< Version 2.0 } audio_function_protocol_code_t; @@ -67,402 +70,798 @@ typedef enum typedef enum { AUDIO_INT_PROTOCOL_CODE_UNDEF = 0x00, + AUDIO_INT_PROTOCOL_CODE_V1 = 0x00, ///< Version 1.0 - same as undefined for backward compatibility AUDIO_INT_PROTOCOL_CODE_V2 = 0x20, ///< Version 2.0 } audio_interface_protocol_code_t; +//--------------------------------------------------------------------+ +// USB AUDIO CLASS 1.0 (UAC1) DEFINITIONS +//--------------------------------------------------------------------+ + +/// A.4 - Audio Class-Specific AC Interface Descriptor Subtypes UAC1 +typedef enum +{ + AUDIO10_CS_AC_INTERFACE_AC_DESCRIPTOR_UNDEF = 0x00, + AUDIO10_CS_AC_INTERFACE_HEADER = 0x01, + AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, + AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, + AUDIO10_CS_AC_INTERFACE_MIXER_UNIT = 0x04, + AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, + AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, + AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT = 0x07, + AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT = 0x08, +} audio10_cs_ac_interface_subtype_t; + +/// A.5 - Audio Class-Specific AS Interface Descriptor Subtypes UAC1 +typedef enum +{ + AUDIO10_CS_AS_INTERFACE_AS_DESCRIPTOR_UNDEF = 0x00, + AUDIO10_CS_AS_INTERFACE_AS_GENERAL = 0x01, + AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, +} audio10_cs_as_interface_subtype_t; + +/// A.6 - Audio Class-Specific EP Descriptor Subtypes UAC1 +typedef enum +{ + AUDIO10_CS_EP_SUBTYPE_UNDEF = 0x00, + AUDIO10_CS_EP_SUBTYPE_GENERAL = 0x01, +} audio10_cs_ep_subtype_t; + +/// A.7 - Audio Class-Specific Request Codes UAC1 +typedef enum +{ + AUDIO10_CS_REQ_UNDEF = 0x00, + AUDIO10_CS_REQ_SET_CUR = 0x01, + AUDIO10_CS_REQ_GET_CUR = 0x81, + AUDIO10_CS_REQ_SET_MIN = 0x02, + AUDIO10_CS_REQ_GET_MIN = 0x82, + AUDIO10_CS_REQ_SET_MAX = 0x03, + AUDIO10_CS_REQ_GET_MAX = 0x83, + AUDIO10_CS_REQ_SET_RES = 0x04, + AUDIO10_CS_REQ_GET_RES = 0x84, + AUDIO10_CS_REQ_SET_MEM = 0x05, + AUDIO10_CS_REQ_GET_MEM = 0x85, + AUDIO10_CS_REQ_GET_STAT = 0xFF, +} audio10_cs_req_t; + +/// A.9.1 - Terminal Control Selectors UAC1 +typedef enum +{ + AUDIO10_TE_CTRL_UNDEF = 0x00, + AUDIO10_TE_CTRL_COPY_PROTECT = 0x01, +} audio10_terminal_control_selector_t; + +/// A.9.2 - Feature Unit Control Selectors UAC1 +typedef enum +{ + AUDIO10_FU_CTRL_UNDEF = 0x00, + AUDIO10_FU_CTRL_MUTE = 0x01, + AUDIO10_FU_CTRL_VOLUME = 0x02, + AUDIO10_FU_CTRL_BASS = 0x03, + AUDIO10_FU_CTRL_MID = 0x04, + AUDIO10_FU_CTRL_TREBLE = 0x05, + AUDIO10_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, + AUDIO10_FU_CTRL_AGC = 0x07, + AUDIO10_FU_CTRL_DELAY = 0x08, + AUDIO10_FU_CTRL_BASS_BOOST = 0x09, + AUDIO10_FU_CTRL_LOUDNESS = 0x0A, +} audio10_feature_unit_control_selector_t; + +/// A.9.3 - Up/Down-mix Processing Unit Control Selectors UAC1 +typedef enum +{ + AUDIO10_UD_CTRL_UNDEF = 0x00, + AUDIO10_UD_CTRL_ENABLE = 0x01, + AUDIO10_UD_CTRL_MODE_SELECT = 0x02, +} audio10_up_down_mix_control_selector_t; + +/// A.9.4 - Dolby Prologic Processing Unit Control Selectors UAC1 +typedef enum +{ + AUDIO10_DP_CTRL_UNDEF = 0x00, + AUDIO10_DP_CTRL_ENABLE = 0x01, + AUDIO10_DP_CTRL_MODE_SELECT = 0x02, +} audio10_dolby_prologic_control_selector_t; + +/// A.9.5 - 3D Stereo Extender Processing Unit Control Selectors UAC1 +typedef enum +{ + AUDIO10_3D_CTRL_UNDEF = 0x00, + AUDIO10_3D_CTRL_ENABLE = 0x01, + AUDIO10_3D_CTRL_SPACIOUSNESS = 0x02, +} audio10_3d_stereo_extender_control_selector_t; + +/// A.9.6 - Reverberation Processing Unit Control Selectors UAC1 +typedef enum +{ + AUDIO10_RV_CTRL_UNDEF = 0x00, + AUDIO10_RV_CTRL_ENABLE = 0x01, + AUDIO10_RV_CTRL_REVERB_LEVEL = 0x02, + AUDIO10_RV_CTRL_REVERB_TIME = 0x03, + AUDIO10_RV_CTRL_REVERB_FEEDBACK = 0x04, +} audio10_reverberation_control_selector_t; + +/// A.9.7 - Chorus Processing Unit Control Selectors UAC1 +typedef enum +{ + AUDIO10_CH_CTRL_UNDEF = 0x00, + AUDIO10_CH_CTRL_ENABLE = 0x01, + AUDIO10_CH_CTRL_CHORUS_LEVEL = 0x02, + AUDIO10_CH_CTRL_CHORUS_RATE = 0x03, + AUDIO10_CH_CTRL_CHORUS_DEPTH = 0x04, +} audio10_chorus_control_selector_t; + +/// A.9.8 - Dynamic Range Compressor Processing Unit Control Selectors UAC1 +typedef enum +{ + AUDIO10_DR_CTRL_UNDEF = 0x00, + AUDIO10_DR_CTRL_ENABLE = 0x01, + AUDIO10_DR_CTRL_COMPRESSION_RATE = 0x02, + AUDIO10_DR_CTRL_MAXAMPL = 0x03, + AUDIO10_DR_CTRL_THRESHOLD = 0x04, + AUDIO10_DR_CTRL_ATTACK_TIME = 0x05, + AUDIO10_DR_CTRL_RELEASE_TIME = 0x06, +} audio10_dynamic_range_compression_control_selector_t; + +/// A.9.9 - Extension Unit Control Selectors UAC1 +typedef enum +{ + AUDIO10_XU_CTRL_UNDEF = 0x00, + AUDIO10_XU_CTRL_ENABLE = 0x01, +} audio10_extension_unit_control_selector_t; + +/// A.9.10 - Endpoint Control Selectors UAC1 +typedef enum +{ + AUDIO10_EP_CTRL_UNDEF = 0x00, + AUDIO10_EP_CTRL_SAMPLING_FREQ = 0x01, + AUDIO10_EP_CTRL_PITCH = 0x02, +} audio10_ep_control_selector_t; + +/// A.1 - Audio Class-Format Type Codes UAC1 +typedef enum +{ + AUDIO10_FORMAT_TYPE_UNDEFINED = 0x00, + AUDIO10_FORMAT_TYPE_I = 0x01, + AUDIO10_FORMAT_TYPE_II = 0x02, + AUDIO10_FORMAT_TYPE_III = 0x03, +} audio10_format_type_t; + +// A.1.1 - Audio Class-Audio Data Format Type I UAC1 +typedef enum +{ + AUDIO10_DATA_FORMAT_TYPE_I_PCM = 0x0001, + AUDIO10_DATA_FORMAT_TYPE_I_PCM8 = 0x0002, + AUDIO10_DATA_FORMAT_TYPE_I_IEEE_FLOAT = 0x0003, + AUDIO10_DATA_FORMAT_TYPE_I_ALAW = 0x0004, + AUDIO10_DATA_FORMAT_TYPE_I_MULAW = 0x0005, +} audio10_data_format_type_I_t; + +// A.1.2 - Audio Class-Audio Data Format Type II UAC1 +typedef enum +{ + AUDIO10_DATA_FORMAT_TYPE_II_MPEG = 0x1001, + AUDIO10_DATA_FORMAT_TYPE_II_AC3 = 0x1002, +} audio10_data_format_type_II_t; + +// A.1.3 - Audio Class-Audio Data Format Type III UAC1 +typedef enum +{ + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_AC3_1 = 0x2001, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L1_1 = 0x2002, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L23_1 = 0x2003, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_EXT_1 = 0x2004, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_L1_LS_1 = 0x2005, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_L23_LS_1 = 0x2006, +} audio10_data_format_type_III_t; + +/// Audio Class-Audio Channel Configuration UAC1 (Table A-7) +typedef enum +{ + AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED = 0x0000, + AUDIO10_CHANNEL_CONFIG_LEFT_FRONT = 0x0001, + AUDIO10_CHANNEL_CONFIG_RIGHT_FRONT = 0x0002, + AUDIO10_CHANNEL_CONFIG_CENTER_FRONT = 0x0004, + AUDIO10_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x0008, + AUDIO10_CHANNEL_CONFIG_LEFT_SURROUND = 0x0010, + AUDIO10_CHANNEL_CONFIG_RIGHT_SURROUND = 0x0020, + AUDIO10_CHANNEL_CONFIG_LEFT_OF_CENTER = 0x0040, + AUDIO10_CHANNEL_CONFIG_RIGHT_OF_CENTER = 0x0080, + AUDIO10_CHANNEL_CONFIG_SURROUND = 0x0100, + AUDIO10_CHANNEL_CONFIG_SIDE_LEFT = 0x0200, + AUDIO10_CHANNEL_CONFIG_SIDE_RIGHT = 0x0400, + AUDIO10_CHANNEL_CONFIG_TOP = 0x0800, +} audio10_channel_config_t; + + +//--------------------------------------------------------------------+ +// USB AUDIO CLASS 1.0 (UAC1) DESCRIPTORS +//--------------------------------------------------------------------+ + +/// AUDIO Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) +#define audio10_desc_cs_ac_interface_n_t(numInterfaces) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength ; /* Size of this descriptor in bytes: 8+n. */\ + uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ + uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_HEADER. */\ + uint16_t bcdADC ; /* Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: 0x0100 for UAC1. */\ + uint16_t wTotalLength ; /* Total number of bytes returned for the class-specific AudioControl interface descriptor. */\ + uint8_t bInCollection ; /* The number of AudioStreaming and MIDIStreaming interfaces in the Audio Interface Collection. */\ + uint8_t baInterfaceNr[numInterfaces]; /* Interface number of the AudioStreaming or MIDIStreaming interface in the Collection. */\ +} + +/// AUDIO Input Terminal Descriptor UAC1 (4.3.2.1) +typedef struct TU_ATTR_PACKED +{ + uint8_t bLength ; ///< Size of this descriptor in bytes: 12. + uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL. + uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. + uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. + uint8_t bAssocTerminal ; ///< ID of the Output Terminal to which this Input Terminal is associated. + uint8_t bNrChannels ; ///< Number of logical output channels in the Terminal's output audio channel cluster. + uint16_t wChannelConfig ; ///< Describes the spatial location of the logical channels. + uint8_t iChannelNames ; ///< Index of a string descriptor, describing the name of the first logical channel. + uint8_t iTerminal ; ///< Index of a string descriptor, describing the Input Terminal. +} audio10_desc_input_terminal_t; + +/// AUDIO Output Terminal Descriptor UAC1 (4.3.2.2) +typedef struct TU_ATTR_PACKED +{ + uint8_t bLength ; ///< Size of this descriptor in bytes: 9. + uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL. + uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. + uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. + uint8_t bAssocTerminal ; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. + uint8_t bSourceID ; ///< ID of the Unit or Terminal to which this Terminal is connected. + uint8_t iTerminal ; ///< Index of a string descriptor, describing the Output Terminal. +} audio10_desc_output_terminal_t; + +/// AUDIO Mixer Unit Descriptor UAC1 (4.3.2.3) +#define audio10_desc_mixer_unit_n_t(numInputPins, numControlBytes) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength ; /* Size of this descriptor in bytes: 10+p+n. */\ + uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ + uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_MIXER_UNIT. */\ + uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ + uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Mixer Unit are connected. */\ + uint8_t bNrChannels ; /* Number of logical output channels in the Mixer Unit's output audio channel cluster. */\ + uint16_t wChannelConfig ; /* Describes the spatial location of the logical channels. */\ + uint8_t iChannelNames ; /* Index of a string descriptor, describing the name of the first logical channel. */\ + uint8_t bmControls[numControlBytes]; /* Mixer Unit Controls bitmap. */\ + uint8_t iMixer ; /* Index of a string descriptor, describing the Mixer Unit. */\ +} + +/// AUDIO Selector Unit Descriptor UAC1 (4.3.2.4) +#define audio10_desc_selector_unit_n_t(numInputPins) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength ; /* Size of this descriptor in bytes: 6+p. */\ + uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ + uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT. */\ + uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ + uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Selector Unit are connected. */\ + uint8_t iSelector ; /* Index of a string descriptor, describing the Selector Unit. */\ +} + +/// AUDIO Feature Unit Descriptor UAC1 (4.3.2.5) +#define audio10_desc_feature_unit_n_t(numChannels, controlSize) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength ; /* Size of this descriptor in bytes: 7+(ch+1)*n. */\ + uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ + uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT. */\ + uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ + uint8_t bSourceID ; /* ID of the Unit or Terminal to which this Feature Unit is connected. */\ + uint8_t bControlSize ; /* Size in bytes of an element of the bmaControls() array. */\ + uint8_t bmaControls[(numChannels+1)*controlSize]; /* Control bitmaps for master + logical channels. */\ + uint8_t iFeature ; /* Index of a string descriptor, describing this Feature Unit. */\ +} + +/// AUDIO Processing Unit Descriptor UAC1 (4.3.2.6) +#define audio10_desc_processing_unit_n_t(numInputPins, numControlBytes) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength ; /* Size of this descriptor in bytes: 13+p+n. */\ + uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ + uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT. */\ + uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ + uint16_t wProcessType ; /* Constant identifying the type of processing this Unit is performing. */\ + uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Processing Unit are connected. */\ + uint8_t bNrChannels ; /* Number of logical output channels in the Processing Unit's output audio channel cluster. */\ + uint16_t wChannelConfig ; /* Describes the spatial location of the logical channels. */\ + uint8_t iChannelNames ; /* Index of a string descriptor, describing the name of the first logical channel. */\ + uint8_t bControlSize ; /* Size in bytes of the bmControls field. */\ + uint8_t bmControls[numControlBytes]; /* Processing Unit Controls bitmap. */\ + uint8_t iProcessing ; /* Index of a string descriptor, describing the Processing Unit. */\ +} + +/// AUDIO Extension Unit Descriptor UAC1 (4.3.2.7) +#define audio10_desc_extension_unit_n_t(numInputPins, numControlBytes) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength ; /* Size of this descriptor in bytes: 13+p+n. */\ + uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ + uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT. */\ + uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ + uint16_t wExtensionCode ; /* Vendor-specific code identifying the Extension Unit. */\ + uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Extension Unit are connected. */\ + uint8_t bNrChannels ; /* Number of logical output channels in the Extension Unit's output audio channel cluster. */\ + uint16_t wChannelConfig ; /* Describes the spatial location of the logical channels. */\ + uint8_t iChannelNames ; /* Index of a string descriptor, describing the name of the first logical channel. */\ + uint8_t bControlSize ; /* Size in bytes of the bmControls field. */\ + uint8_t bmControls[numControlBytes]; /* Extension Unit Controls bitmap. */\ + uint8_t iExtension ; /* Index of a string descriptor, describing the Extension Unit. */\ +} + +/// AUDIO Class-Specific AS Interface Descriptor UAC1 (4.5.2) +typedef struct TU_ATTR_PACKED +{ + uint8_t bLength ; ///< Size of this descriptor in bytes: 7. + uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_AS_GENERAL. + uint8_t bTerminalLink ; ///< The Terminal ID of the Terminal to which the endpoint of this interface is connected. + uint8_t bDelay ; ///< Expressed in number of frames. + uint16_t wFormatTag ; ///< The Audio Data Format that has to be used to communicate with this interface. +} audio10_desc_cs_as_interface_t; + +/// AUDIO Type I Format Type Descriptor UAC1 (2.2.5) +#define audio10_desc_type_I_format_n_t(numSamFreq) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength ; /* Size of this descriptor in bytes: 8+(ns*3). */\ + uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ + uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */\ + uint8_t bFormatType ; /* Constant identifying the Format Type the AudioStreaming interface is using. */\ + uint8_t bNrChannels ; /* Indicates the number of physical channels in the audio data stream. */\ + uint8_t bSubFrameSize ; /* The number of bytes occupied by one audio subframe. */\ + uint8_t bBitResolution ; /* The number of effectively used bits from the available bits in an audio subframe. */\ + uint8_t bSamFreqType ; /* Indicates how the sampling frequency can be programmed. */\ + uint8_t tSamFreq[numSamFreq*3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */\ +} + +/// AUDIO Type II Format Type Descriptor UAC1 (2.3.5) +#define audio10_desc_type_II_format_n_t(numSamFreq) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength ; /* Size of this descriptor in bytes: 9+(ns*3). */\ + uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ + uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */\ + uint8_t bFormatType ; /* Constant identifying the Format Type the AudioStreaming interface is using. */\ + uint16_t wMaxBitRate ; /* Indicates the maximum number of bits per second this interface can handle. */\ + uint16_t wSamplesPerFrame ; /* Indicates the number of PCM audio samples contained in one encoded audio frame. */\ + uint8_t bSamFreqType ; /* Indicates how the sampling frequency can be programmed. */\ + uint8_t tSamFreq[numSamFreq*3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */\ +} + +/// AUDIO Type III Format Type Descriptor UAC1 (2.4.5) +#define audio10_desc_type_III_format_n_t(numSamFreq) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength ; /* Size of this descriptor in bytes: 8+(ns*3). */\ + uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ + uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */\ + uint8_t bFormatType ; /* Constant identifying the Format Type the AudioStreaming interface is using. */\ + uint8_t bNrChannels ; /* Indicates the number of physical channels in the audio data stream. */\ + uint8_t bSubFrameSize ; /* The number of bytes occupied by one audio subframe. */\ + uint8_t bBitResolution ; /* The number of effectively used bits from the available bits in an audio subframe. */\ + uint8_t bSamFreqType ; /* Indicates how the sampling frequency can be programmed. */\ + uint8_t tSamFreq[numSamFreq*3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */\ +} + +/// AUDIO Class-Specific AS Isochronous Audio Data Endpoint Descriptor UAC1 (4.6.1.2) +typedef struct TU_ATTR_PACKED +{ + uint8_t bLength ; ///< Size of this descriptor in bytes: 7. + uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_EP_SUBTYPE_GENERAL. + uint8_t bmAttributes ; ///< Bit 0: Sampling Frequency, Bit 1: Pitch, Bit 7: MaxPacketsOnly. + uint8_t bLockDelayUnits ; ///< Indicates the units used for the wLockDelay field. + uint16_t wLockDelay ; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. +} audio10_desc_cs_as_iso_data_ep_t; + +/// AUDIO Interrupt Data Message Format UAC1 (3.7.1.2) +typedef struct TU_ATTR_PACKED +{ + uint8_t bStatusType ; ///< Indicates the type of status information being reported. + uint8_t bOriginator ; ///< Indicates the entity that originated this status information. +} audio10_interrupt_data_t; + +//--------------------------------------------------------------------+ +// USB AUDIO CLASS 2.0 (UAC2) DEFINITIONS +//--------------------------------------------------------------------+ + /// A.7 - Audio Function Category Codes typedef enum { - AUDIO_FUNC_UNDEF = 0x00, - AUDIO_FUNC_DESKTOP_SPEAKER = 0x01, - AUDIO_FUNC_HOME_THEATER = 0x02, - AUDIO_FUNC_MICROPHONE = 0x03, - AUDIO_FUNC_HEADSET = 0x04, - AUDIO_FUNC_TELEPHONE = 0x05, - AUDIO_FUNC_CONVERTER = 0x06, - AUDIO_FUNC_SOUND_RECODER = 0x07, - AUDIO_FUNC_IO_BOX = 0x08, - AUDIO_FUNC_MUSICAL_INSTRUMENT = 0x09, - AUDIO_FUNC_PRO_AUDIO = 0x0A, - AUDIO_FUNC_AUDIO_VIDEO = 0x0B, - AUDIO_FUNC_CONTROL_PANEL = 0x0C, - AUDIO_FUNC_OTHER = 0xFF, -} audio_function_code_t; + AUDIO20_FUNC_UNDEF = 0x00, + AUDIO20_FUNC_DESKTOP_SPEAKER = 0x01, + AUDIO20_FUNC_HOME_THEATER = 0x02, + AUDIO20_FUNC_MICROPHONE = 0x03, + AUDIO20_FUNC_HEADSET = 0x04, + AUDIO20_FUNC_TELEPHONE = 0x05, + AUDIO20_FUNC_CONVERTER = 0x06, + AUDIO20_FUNC_SOUND_RECODER = 0x07, + AUDIO20_FUNC_IO_BOX = 0x08, + AUDIO20_FUNC_MUSICAL_INSTRUMENT = 0x09, + AUDIO20_FUNC_PRO_AUDIO = 0x0A, + AUDIO20_FUNC_AUDIO_VIDEO = 0x0B, + AUDIO20_FUNC_CONTROL_PANEL = 0x0C, + AUDIO20_FUNC_OTHER = 0xFF, +} audio20_function_code_t; /// A.9 - Audio Class-Specific AC Interface Descriptor Subtypes UAC2 typedef enum { - AUDIO_CS_AC_INTERFACE_AC_DESCRIPTOR_UNDEF = 0x00, - AUDIO_CS_AC_INTERFACE_HEADER = 0x01, - AUDIO_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, - AUDIO_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, - AUDIO_CS_AC_INTERFACE_MIXER_UNIT = 0x04, - AUDIO_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, - AUDIO_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, - AUDIO_CS_AC_INTERFACE_EFFECT_UNIT = 0x07, - AUDIO_CS_AC_INTERFACE_PROCESSING_UNIT = 0x08, - AUDIO_CS_AC_INTERFACE_EXTENSION_UNIT = 0x09, - AUDIO_CS_AC_INTERFACE_CLOCK_SOURCE = 0x0A, - AUDIO_CS_AC_INTERFACE_CLOCK_SELECTOR = 0x0B, - AUDIO_CS_AC_INTERFACE_CLOCK_MULTIPLIER = 0x0C, - AUDIO_CS_AC_INTERFACE_SAMPLE_RATE_CONVERTER = 0x0D, -} audio_cs_ac_interface_subtype_t; + AUDIO20_CS_AC_INTERFACE_AC_DESCRIPTOR_UNDEF = 0x00, + AUDIO20_CS_AC_INTERFACE_HEADER = 0x01, + AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, + AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, + AUDIO20_CS_AC_INTERFACE_MIXER_UNIT = 0x04, + AUDIO20_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, + AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, + AUDIO20_CS_AC_INTERFACE_EFFECT_UNIT = 0x07, + AUDIO20_CS_AC_INTERFACE_PROCESSING_UNIT = 0x08, + AUDIO20_CS_AC_INTERFACE_EXTENSION_UNIT = 0x09, + AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE = 0x0A, + AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR = 0x0B, + AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER = 0x0C, + AUDIO20_CS_AC_INTERFACE_SAMPLE_RATE_CONVERTER = 0x0D, +} audio20_cs_ac_interface_subtype_t; /// A.10 - Audio Class-Specific AS Interface Descriptor Subtypes UAC2 typedef enum { - AUDIO_CS_AS_INTERFACE_AS_DESCRIPTOR_UNDEF = 0x00, - AUDIO_CS_AS_INTERFACE_AS_GENERAL = 0x01, - AUDIO_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, - AUDIO_CS_AS_INTERFACE_ENCODER = 0x03, - AUDIO_CS_AS_INTERFACE_DECODER = 0x04, -} audio_cs_as_interface_subtype_t; + AUDIO20_CS_AS_INTERFACE_AS_DESCRIPTOR_UNDEF = 0x00, + AUDIO20_CS_AS_INTERFACE_AS_GENERAL = 0x01, + AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, + AUDIO20_CS_AS_INTERFACE_ENCODER = 0x03, + AUDIO20_CS_AS_INTERFACE_DECODER = 0x04, +} audio20_cs_as_interface_subtype_t; /// A.11 - Effect Unit Effect Types typedef enum { - AUDIO_EFFECT_TYPE_UNDEF = 0x00, - AUDIO_EFFECT_TYPE_PARAM_EQ_SECTION = 0x01, - AUDIO_EFFECT_TYPE_REVERBERATION = 0x02, - AUDIO_EFFECT_TYPE_MOD_DELAY = 0x03, - AUDIO_EFFECT_TYPE_DYN_RANGE_COMP = 0x04, -} audio_effect_unit_effect_type_t; + AUDIO20_EFFECT_TYPE_UNDEF = 0x00, + AUDIO20_EFFECT_TYPE_PARAM_EQ_SECTION = 0x01, + AUDIO20_EFFECT_TYPE_REVERBERATION = 0x02, + AUDIO20_EFFECT_TYPE_MOD_DELAY = 0x03, + AUDIO20_EFFECT_TYPE_DYN_RANGE_COMP = 0x04, +} audio20_effect_unit_effect_type_t; /// A.12 - Processing Unit Process Types typedef enum { - AUDIO_PROCESS_TYPE_UNDEF = 0x00, - AUDIO_PROCESS_TYPE_UP_DOWN_MIX = 0x01, - AUDIO_PROCESS_TYPE_DOLBY_PROLOGIC = 0x02, - AUDIO_PROCESS_TYPE_STEREO_EXTENDER = 0x03, -} audio_processing_unit_process_type_t; + AUDIO20_PROCESS_TYPE_UNDEF = 0x00, + AUDIO20_PROCESS_TYPE_UP_DOWN_MIX = 0x01, + AUDIO20_PROCESS_TYPE_DOLBY_PROLOGIC = 0x02, + AUDIO20_PROCESS_TYPE_STEREO_EXTENDER = 0x03, +} audio20_processing_unit_process_type_t; /// A.13 - Audio Class-Specific EP Descriptor Subtypes UAC2 typedef enum { - AUDIO_CS_EP_SUBTYPE_UNDEF = 0x00, - AUDIO_CS_EP_SUBTYPE_GENERAL = 0x01, -} audio_cs_ep_subtype_t; + AUDIO20_CS_EP_SUBTYPE_UNDEF = 0x00, + AUDIO20_CS_EP_SUBTYPE_GENERAL = 0x01, +} audio20_cs_ep_subtype_t; -/// A.14 - Audio Class-Specific Request Codes +/// A.14 - Audio Class-Specific Request Codes UAC2 typedef enum { - AUDIO_CS_REQ_UNDEF = 0x00, - AUDIO_CS_REQ_CUR = 0x01, - AUDIO_CS_REQ_RANGE = 0x02, - AUDIO_CS_REQ_MEM = 0x03, -} audio_cs_req_t; + AUDIO20_CS_REQ_UNDEF = 0x00, + AUDIO20_CS_REQ_CUR = 0x01, + AUDIO20_CS_REQ_RANGE = 0x02, + AUDIO20_CS_REQ_MEM = 0x03, +} audio20_cs_req_t; -/// A.17 - Control Selector Codes +/// A.17 - Control Selector Codes UAC2 /// A.17.1 - Clock Source Control Selectors typedef enum { - AUDIO_CS_CTRL_UNDEF = 0x00, - AUDIO_CS_CTRL_SAM_FREQ = 0x01, - AUDIO_CS_CTRL_CLK_VALID = 0x02, -} audio_clock_src_control_selector_t; + AUDIO20_CS_CTRL_UNDEF = 0x00, + AUDIO20_CS_CTRL_SAM_FREQ = 0x01, + AUDIO20_CS_CTRL_CLK_VALID = 0x02, +} audio20_clock_src_control_selector_t; /// A.17.2 - Clock Selector Control Selectors typedef enum { - AUDIO_CX_CTRL_UNDEF = 0x00, - AUDIO_CX_CTRL_CONTROL = 0x01, -} audio_clock_sel_control_selector_t; + AUDIO20_CX_CTRL_UNDEF = 0x00, + AUDIO20_CX_CTRL_CONTROL = 0x01, +} audio20_clock_sel_control_selector_t; /// A.17.3 - Clock Multiplier Control Selectors typedef enum { - AUDIO_CM_CTRL_UNDEF = 0x00, - AUDIO_CM_CTRL_NUMERATOR_CONTROL = 0x01, - AUDIO_CM_CTRL_DENOMINATOR_CONTROL = 0x02, -} audio_clock_mul_control_selector_t; + AUDIO20_CM_CTRL_UNDEF = 0x00, + AUDIO20_CM_CTRL_NUMERATOR_CONTROL = 0x01, + AUDIO20_CM_CTRL_DENOMINATOR_CONTROL = 0x02, +} audio20_clock_mul_control_selector_t; -/// A.17.4 - Terminal Control Selectors +/// A.17.4 - Terminal Control Selectors UAC2 typedef enum { - AUDIO_TE_CTRL_UNDEF = 0x00, - AUDIO_TE_CTRL_COPY_PROTECT = 0x01, - AUDIO_TE_CTRL_CONNECTOR = 0x02, - AUDIO_TE_CTRL_OVERLOAD = 0x03, - AUDIO_TE_CTRL_CLUSTER = 0x04, - AUDIO_TE_CTRL_UNDERFLOW = 0x05, - AUDIO_TE_CTRL_OVERFLOW = 0x06, - AUDIO_TE_CTRL_LATENCY = 0x07, -} audio_terminal_control_selector_t; + AUDIO20_TE_CTRL_UNDEF = 0x00, + AUDIO20_TE_CTRL_COPY_PROTECT = 0x01, + AUDIO20_TE_CTRL_CONNECTOR = 0x02, + AUDIO20_TE_CTRL_OVERLOAD = 0x03, + AUDIO20_TE_CTRL_CLUSTER = 0x04, + AUDIO20_TE_CTRL_UNDERFLOW = 0x05, + AUDIO20_TE_CTRL_OVERFLOW = 0x06, + AUDIO20_TE_CTRL_LATENCY = 0x07, +} audio20_terminal_control_selector_t; /// A.17.5 - Mixer Control Selectors typedef enum { - AUDIO_MU_CTRL_UNDEF = 0x00, - AUDIO_MU_CTRL_MIXER = 0x01, - AUDIO_MU_CTRL_CLUSTER = 0x02, - AUDIO_MU_CTRL_UNDERFLOW = 0x03, - AUDIO_MU_CTRL_OVERFLOW = 0x04, - AUDIO_MU_CTRL_LATENCY = 0x05, -} audio_mixer_control_selector_t; + AUDIO20_MU_CTRL_UNDEF = 0x00, + AUDIO20_MU_CTRL_MIXER = 0x01, + AUDIO20_MU_CTRL_CLUSTER = 0x02, + AUDIO20_MU_CTRL_UNDERFLOW = 0x03, + AUDIO20_MU_CTRL_OVERFLOW = 0x04, + AUDIO20_MU_CTRL_LATENCY = 0x05, +} audio20_mixer_control_selector_t; /// A.17.6 - Selector Control Selectors typedef enum { - AUDIO_SU_CTRL_UNDEF = 0x00, - AUDIO_SU_CTRL_SELECTOR = 0x01, - AUDIO_SU_CTRL_LATENCY = 0x02, -} audio_sel_control_selector_t; - -/// A.17.7 - Feature Unit Control Selectors -typedef enum -{ - AUDIO_FU_CTRL_UNDEF = 0x00, - AUDIO_FU_CTRL_MUTE = 0x01, - AUDIO_FU_CTRL_VOLUME = 0x02, - AUDIO_FU_CTRL_BASS = 0x03, - AUDIO_FU_CTRL_MID = 0x04, - AUDIO_FU_CTRL_TREBLE = 0x05, - AUDIO_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, - AUDIO_FU_CTRL_AGC = 0x07, - AUDIO_FU_CTRL_DELAY = 0x08, - AUDIO_FU_CTRL_BASS_BOOST = 0x09, - AUDIO_FU_CTRL_LOUDNESS = 0x0A, - AUDIO_FU_CTRL_INPUT_GAIN = 0x0B, - AUDIO_FU_CTRL_GAIN_PAD = 0x0C, - AUDIO_FU_CTRL_INVERTER = 0x0D, - AUDIO_FU_CTRL_UNDERFLOW = 0x0E, - AUDIO_FU_CTRL_OVERVLOW = 0x0F, - AUDIO_FU_CTRL_LATENCY = 0x10, -} audio_feature_unit_control_selector_t; + AUDIO20_SU_CTRL_UNDEF = 0x00, + AUDIO20_SU_CTRL_SELECTOR = 0x01, + AUDIO20_SU_CTRL_LATENCY = 0x02, +} audio20_sel_control_selector_t; + +/// A.17.7 - Feature Unit Control Selectors UAC2 +typedef enum +{ + AUDIO20_FU_CTRL_UNDEF = 0x00, + AUDIO20_FU_CTRL_MUTE = 0x01, + AUDIO20_FU_CTRL_VOLUME = 0x02, + AUDIO20_FU_CTRL_BASS = 0x03, + AUDIO20_FU_CTRL_MID = 0x04, + AUDIO20_FU_CTRL_TREBLE = 0x05, + AUDIO20_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, + AUDIO20_FU_CTRL_AGC = 0x07, + AUDIO20_FU_CTRL_DELAY = 0x08, + AUDIO20_FU_CTRL_BASS_BOOST = 0x09, + AUDIO20_FU_CTRL_LOUDNESS = 0x0A, + AUDIO20_FU_CTRL_INPUT_GAIN = 0x0B, + AUDIO20_FU_CTRL_GAIN_PAD = 0x0C, + AUDIO20_FU_CTRL_INVERTER = 0x0D, + AUDIO20_FU_CTRL_UNDERFLOW = 0x0E, + AUDIO20_FU_CTRL_OVERVLOW = 0x0F, + AUDIO20_FU_CTRL_LATENCY = 0x10, +} audio20_feature_unit_control_selector_t; /// A.17.8 Effect Unit Control Selectors /// A.17.8.1 Parametric Equalizer Section Effect Unit Control Selectors typedef enum { - AUDIO_PE_CTRL_UNDEF = 0x00, - AUDIO_PE_CTRL_ENABLE = 0x01, - AUDIO_PE_CTRL_CENTERFREQ = 0x02, - AUDIO_PE_CTRL_QFACTOR = 0x03, - AUDIO_PE_CTRL_GAIN = 0x04, - AUDIO_PE_CTRL_UNDERFLOW = 0x05, - AUDIO_PE_CTRL_OVERFLOW = 0x06, - AUDIO_PE_CTRL_LATENCY = 0x07, -} audio_parametric_equalizer_control_selector_t; + AUDIO20_PE_CTRL_UNDEF = 0x00, + AUDIO20_PE_CTRL_ENABLE = 0x01, + AUDIO20_PE_CTRL_CENTERFREQ = 0x02, + AUDIO20_PE_CTRL_QFACTOR = 0x03, + AUDIO20_PE_CTRL_GAIN = 0x04, + AUDIO20_PE_CTRL_UNDERFLOW = 0x05, + AUDIO20_PE_CTRL_OVERFLOW = 0x06, + AUDIO20_PE_CTRL_LATENCY = 0x07, +} audio20_parametric_equalizer_control_selector_t; /// A.17.8.2 Reverberation Effect Unit Control Selectors typedef enum { - AUDIO_RV_CTRL_UNDEF = 0x00, - AUDIO_RV_CTRL_ENABLE = 0x01, - AUDIO_RV_CTRL_TYPE = 0x02, - AUDIO_RV_CTRL_LEVEL = 0x03, - AUDIO_RV_CTRL_TIME = 0x04, - AUDIO_RV_CTRL_FEEDBACK = 0x05, - AUDIO_RV_CTRL_PREDELAY = 0x06, - AUDIO_RV_CTRL_DENSITY = 0x07, - AUDIO_RV_CTRL_HIFREQ_ROLLOFF = 0x08, - AUDIO_RV_CTRL_UNDERFLOW = 0x09, - AUDIO_RV_CTRL_OVERFLOW = 0x0A, - AUDIO_RV_CTRL_LATENCY = 0x0B, -} audio_reverberation_effect_control_selector_t; + AUDIO20_RV_CTRL_UNDEF = 0x00, + AUDIO20_RV_CTRL_ENABLE = 0x01, + AUDIO20_RV_CTRL_TYPE = 0x02, + AUDIO20_RV_CTRL_LEVEL = 0x03, + AUDIO20_RV_CTRL_TIME = 0x04, + AUDIO20_RV_CTRL_FEEDBACK = 0x05, + AUDIO20_RV_CTRL_PREDELAY = 0x06, + AUDIO20_RV_CTRL_DENSITY = 0x07, + AUDIO20_RV_CTRL_HIFREQ_ROLLOFF = 0x08, + AUDIO20_RV_CTRL_UNDERFLOW = 0x09, + AUDIO20_RV_CTRL_OVERFLOW = 0x0A, + AUDIO20_RV_CTRL_LATENCY = 0x0B, +} audio20_reverberation_effect_control_selector_t; /// A.17.8.3 Modulation Delay Effect Unit Control Selectors typedef enum { - AUDIO_MD_CTRL_UNDEF = 0x00, - AUDIO_MD_CTRL_ENABLE = 0x01, - AUDIO_MD_CTRL_BALANCE = 0x02, - AUDIO_MD_CTRL_RATE = 0x03, - AUDIO_MD_CTRL_DEPTH = 0x04, - AUDIO_MD_CTRL_TIME = 0x05, - AUDIO_MD_CTRL_FEEDBACK = 0x06, - AUDIO_MD_CTRL_UNDERFLOW = 0x07, - AUDIO_MD_CTRL_OVERFLOW = 0x08, - AUDIO_MD_CTRL_LATENCY = 0x09, -} audio_modulation_delay_control_selector_t; + AUDIO20_MD_CTRL_UNDEF = 0x00, + AUDIO20_MD_CTRL_ENABLE = 0x01, + AUDIO20_MD_CTRL_BALANCE = 0x02, + AUDIO20_MD_CTRL_RATE = 0x03, + AUDIO20_MD_CTRL_DEPTH = 0x04, + AUDIO20_MD_CTRL_TIME = 0x05, + AUDIO20_MD_CTRL_FEEDBACK = 0x06, + AUDIO20_MD_CTRL_UNDERFLOW = 0x07, + AUDIO20_MD_CTRL_OVERFLOW = 0x08, + AUDIO20_MD_CTRL_LATENCY = 0x09, +} audio20_modulation_delay_control_selector_t; /// A.17.8.4 Dynamic Range Compressor Effect Unit Control Selectors typedef enum { - AUDIO_DR_CTRL_UNDEF = 0x00, - AUDIO_DR_CTRL_ENABLE = 0x01, - AUDIO_DR_CTRL_COMPRESSION_RATE = 0x02, - AUDIO_DR_CTRL_MAXAMPL = 0x03, - AUDIO_DR_CTRL_THRESHOLD = 0x04, - AUDIO_DR_CTRL_ATTACK_TIME = 0x05, - AUDIO_DR_CTRL_RELEASE_TIME = 0x06, - AUDIO_DR_CTRL_UNDERFLOW = 0x07, - AUDIO_DR_CTRL_OVERFLOW = 0x08, - AUDIO_DR_CTRL_LATENCY = 0x09, -} audio_dynamic_range_compression_control_selector_t; + AUDIO20_DR_CTRL_UNDEF = 0x00, + AUDIO20_DR_CTRL_ENABLE = 0x01, + AUDIO20_DR_CTRL_COMPRESSION_RATE = 0x02, + AUDIO20_DR_CTRL_MAXAMPL = 0x03, + AUDIO20_DR_CTRL_THRESHOLD = 0x04, + AUDIO20_DR_CTRL_ATTACK_TIME = 0x05, + AUDIO20_DR_CTRL_RELEASE_TIME = 0x06, + AUDIO20_DR_CTRL_UNDERFLOW = 0x07, + AUDIO20_DR_CTRL_OVERFLOW = 0x08, + AUDIO20_DR_CTRL_LATENCY = 0x09, +} audio20_dynamic_range_compression_control_selector_t; /// A.17.9 Processing Unit Control Selectors /// A.17.9.1 Up/Down-mix Processing Unit Control Selectors typedef enum { - AUDIO_UD_CTRL_UNDEF = 0x00, - AUDIO_UD_CTRL_ENABLE = 0x01, - AUDIO_UD_CTRL_MODE_SELECT = 0x02, - AUDIO_UD_CTRL_CLUSTER = 0x03, - AUDIO_UD_CTRL_UNDERFLOW = 0x04, - AUDIO_UD_CTRL_OVERFLOW = 0x05, - AUDIO_UD_CTRL_LATENCY = 0x06, -} audio_up_down_mix_control_selector_t; + AUDIO20_UD_CTRL_UNDEF = 0x00, + AUDIO20_UD_CTRL_ENABLE = 0x01, + AUDIO20_UD_CTRL_MODE_SELECT = 0x02, + AUDIO20_UD_CTRL_CLUSTER = 0x03, + AUDIO20_UD_CTRL_UNDERFLOW = 0x04, + AUDIO20_UD_CTRL_OVERFLOW = 0x05, + AUDIO20_UD_CTRL_LATENCY = 0x06, +} audio20_up_down_mix_control_selector_t; /// A.17.9.2 Dolby Prologic ™ Processing Unit Control Selectors typedef enum { - AUDIO_DP_CTRL_UNDEF = 0x00, - AUDIO_DP_CTRL_ENABLE = 0x01, - AUDIO_DP_CTRL_MODE_SELECT = 0x02, - AUDIO_DP_CTRL_CLUSTER = 0x03, - AUDIO_DP_CTRL_UNDERFLOW = 0x04, - AUDIO_DP_CTRL_OVERFLOW = 0x05, - AUDIO_DP_CTRL_LATENCY = 0x06, -} audio_dolby_prologic_control_selector_t; + AUDIO20_DP_CTRL_UNDEF = 0x00, + AUDIO20_DP_CTRL_ENABLE = 0x01, + AUDIO20_DP_CTRL_MODE_SELECT = 0x02, + AUDIO20_DP_CTRL_CLUSTER = 0x03, + AUDIO20_DP_CTRL_UNDERFLOW = 0x04, + AUDIO20_DP_CTRL_OVERFLOW = 0x05, + AUDIO20_DP_CTRL_LATENCY = 0x06, +} audio20_dolby_prologic_control_selector_t; /// A.17.9.3 Stereo Extender Processing Unit Control Selectors typedef enum { - AUDIO_ST_EXT_CTRL_UNDEF = 0x00, - AUDIO_ST_EXT_CTRL_ENABLE = 0x01, - AUDIO_ST_EXT_CTRL_WIDTH = 0x02, - AUDIO_ST_EXT_CTRL_UNDERFLOW = 0x03, - AUDIO_ST_EXT_CTRL_OVERFLOW = 0x04, - AUDIO_ST_EXT_CTRL_LATENCY = 0x05, -} audio_stereo_extender_control_selector_t; + AUDIO20_ST_EXT_CTRL_UNDEF = 0x00, + AUDIO20_ST_EXT_CTRL_ENABLE = 0x01, + AUDIO20_ST_EXT_CTRL_WIDTH = 0x02, + AUDIO20_ST_EXT_CTRL_UNDERFLOW = 0x03, + AUDIO20_ST_EXT_CTRL_OVERFLOW = 0x04, + AUDIO20_ST_EXT_CTRL_LATENCY = 0x05, +} audio20_stereo_extender_control_selector_t; /// A.17.10 Extension Unit Control Selectors typedef enum { - AUDIO_XU_CTRL_UNDEF = 0x00, - AUDIO_XU_CTRL_ENABLE = 0x01, - AUDIO_XU_CTRL_CLUSTER = 0x02, - AUDIO_XU_CTRL_UNDERFLOW = 0x03, - AUDIO_XU_CTRL_OVERFLOW = 0x04, - AUDIO_XU_CTRL_LATENCY = 0x05, -} audio_extension_unit_control_selector_t; + AUDIO20_XU_CTRL_UNDEF = 0x00, + AUDIO20_XU_CTRL_ENABLE = 0x01, + AUDIO20_XU_CTRL_CLUSTER = 0x02, + AUDIO20_XU_CTRL_UNDERFLOW = 0x03, + AUDIO20_XU_CTRL_OVERFLOW = 0x04, + AUDIO20_XU_CTRL_LATENCY = 0x05, +} audio20_extension_unit_control_selector_t; /// A.17.11 AudioStreaming Interface Control Selectors typedef enum { - AUDIO_AS_CTRL_UNDEF = 0x00, - AUDIO_AS_CTRL_ACT_ALT_SETTING = 0x01, - AUDIO_AS_CTRL_VAL_ALT_SETTINGS = 0x02, - AUDIO_AS_CTRL_AUDIO_DATA_FORMAT = 0x03, -} audio_audiostreaming_interface_control_selector_t; + AUDIO20_AS_CTRL_UNDEF = 0x00, + AUDIO20_AS_CTRL_ACT_ALT_SETTING = 0x01, + AUDIO20_AS_CTRL_VAL_ALT_SETTINGS = 0x02, + AUDIO20_AS_CTRL_AUDIO_DATA_FORMAT = 0x03, +} audio20_audiostreaming_interface_control_selector_t; /// A.17.12 Encoder Control Selectors typedef enum { - AUDIO_EN_CTRL_UNDEF = 0x00, - AUDIO_EN_CTRL_BIT_RATE = 0x01, - AUDIO_EN_CTRL_QUALITY = 0x02, - AUDIO_EN_CTRL_VBR = 0x03, - AUDIO_EN_CTRL_TYPE = 0x04, - AUDIO_EN_CTRL_UNDERFLOW = 0x05, - AUDIO_EN_CTRL_OVERFLOW = 0x06, - AUDIO_EN_CTRL_ENCODER_ERROR = 0x07, - AUDIO_EN_CTRL_PARAM1 = 0x08, - AUDIO_EN_CTRL_PARAM2 = 0x09, - AUDIO_EN_CTRL_PARAM3 = 0x0A, - AUDIO_EN_CTRL_PARAM4 = 0x0B, - AUDIO_EN_CTRL_PARAM5 = 0x0C, - AUDIO_EN_CTRL_PARAM6 = 0x0D, - AUDIO_EN_CTRL_PARAM7 = 0x0E, - AUDIO_EN_CTRL_PARAM8 = 0x0F, -} audio_encoder_control_selector_t; + AUDIO20_EN_CTRL_UNDEF = 0x00, + AUDIO20_EN_CTRL_BIT_RATE = 0x01, + AUDIO20_EN_CTRL_QUALITY = 0x02, + AUDIO20_EN_CTRL_VBR = 0x03, + AUDIO20_EN_CTRL_TYPE = 0x04, + AUDIO20_EN_CTRL_UNDERFLOW = 0x05, + AUDIO20_EN_CTRL_OVERFLOW = 0x06, + AUDIO20_EN_CTRL_ENCODER_ERROR = 0x07, + AUDIO20_EN_CTRL_PARAM1 = 0x08, + AUDIO20_EN_CTRL_PARAM2 = 0x09, + AUDIO20_EN_CTRL_PARAM3 = 0x0A, + AUDIO20_EN_CTRL_PARAM4 = 0x0B, + AUDIO20_EN_CTRL_PARAM5 = 0x0C, + AUDIO20_EN_CTRL_PARAM6 = 0x0D, + AUDIO20_EN_CTRL_PARAM7 = 0x0E, + AUDIO20_EN_CTRL_PARAM8 = 0x0F, +} audio20_encoder_control_selector_t; /// A.17.13 Decoder Control Selectors /// A.17.13.1 MPEG Decoder Control Selectors typedef enum { - AUDIO_MPD_CTRL_UNDEF = 0x00, - AUDIO_MPD_CTRL_DUAL_CHANNEL = 0x01, - AUDIO_MPD_CTRL_SECOND_STEREO = 0x02, - AUDIO_MPD_CTRL_MULTILINGUAL = 0x03, - AUDIO_MPD_CTRL_DYN_RANGE = 0x04, - AUDIO_MPD_CTRL_SCALING = 0x05, - AUDIO_MPD_CTRL_HILO_SCALING = 0x06, - AUDIO_MPD_CTRL_UNDERFLOW = 0x07, - AUDIO_MPD_CTRL_OVERFLOW = 0x08, - AUDIO_MPD_CTRL_DECODER_ERROR = 0x09, -} audio_MPEG_decoder_control_selector_t; + AUDIO20_MPD_CTRL_UNDEF = 0x00, + AUDIO20_MPD_CTRL_DUAL_CHANNEL = 0x01, + AUDIO20_MPD_CTRL_SECOND_STEREO = 0x02, + AUDIO20_MPD_CTRL_MULTILINGUAL = 0x03, + AUDIO20_MPD_CTRL_DYN_RANGE = 0x04, + AUDIO20_MPD_CTRL_SCALING = 0x05, + AUDIO20_MPD_CTRL_HILO_SCALING = 0x06, + AUDIO20_MPD_CTRL_UNDERFLOW = 0x07, + AUDIO20_MPD_CTRL_OVERFLOW = 0x08, + AUDIO20_MPD_CTRL_DECODER_ERROR = 0x09, +} audio20_MPEG_decoder_control_selector_t; /// A.17.13.2 AC-3 Decoder Control Selectors typedef enum { - AUDIO_AD_CTRL_UNDEF = 0x00, - AUDIO_AD_CTRL_MODE = 0x01, - AUDIO_AD_CTRL_DYN_RANGE = 0x02, - AUDIO_AD_CTRL_SCALING = 0x03, - AUDIO_AD_CTRL_HILO_SCALING = 0x04, - AUDIO_AD_CTRL_UNDERFLOW = 0x05, - AUDIO_AD_CTRL_OVERFLOW = 0x06, - AUDIO_AD_CTRL_DECODER_ERROR = 0x07, -} audio_AC3_decoder_control_selector_t; + AUDIO20_AD_CTRL_UNDEF = 0x00, + AUDIO20_AD_CTRL_MODE = 0x01, + AUDIO20_AD_CTRL_DYN_RANGE = 0x02, + AUDIO20_AD_CTRL_SCALING = 0x03, + AUDIO20_AD_CTRL_HILO_SCALING = 0x04, + AUDIO20_AD_CTRL_UNDERFLOW = 0x05, + AUDIO20_AD_CTRL_OVERFLOW = 0x06, + AUDIO20_AD_CTRL_DECODER_ERROR = 0x07, +} audio20_AC3_decoder_control_selector_t; /// A.17.13.3 WMA Decoder Control Selectors typedef enum { - AUDIO_WD_CTRL_UNDEF = 0x00, - AUDIO_WD_CTRL_UNDERFLOW = 0x01, - AUDIO_WD_CTRL_OVERFLOW = 0x02, - AUDIO_WD_CTRL_DECODER_ERROR = 0x03, -} audio_WMA_decoder_control_selector_t; + AUDIO20_WD_CTRL_UNDEF = 0x00, + AUDIO20_WD_CTRL_UNDERFLOW = 0x01, + AUDIO20_WD_CTRL_OVERFLOW = 0x02, + AUDIO20_WD_CTRL_DECODER_ERROR = 0x03, +} audio20_WMA_decoder_control_selector_t; /// A.17.13.4 DTS Decoder Control Selectors typedef enum { - AUDIO_DD_CTRL_UNDEF = 0x00, - AUDIO_DD_CTRL_UNDERFLOW = 0x01, - AUDIO_DD_CTRL_OVERFLOW = 0x02, - AUDIO_DD_CTRL_DECODER_ERROR = 0x03, -} audio_DTS_decoder_control_selector_t; + AUDIO20_DD_CTRL_UNDEF = 0x00, + AUDIO20_DD_CTRL_UNDERFLOW = 0x01, + AUDIO20_DD_CTRL_OVERFLOW = 0x02, + AUDIO20_DD_CTRL_DECODER_ERROR = 0x03, +} audio20_DTS_decoder_control_selector_t; /// A.17.14 Endpoint Control Selectors typedef enum { - AUDIO_EP_CTRL_UNDEF = 0x00, - AUDIO_EP_CTRL_PITCH = 0x01, - AUDIO_EP_CTRL_DATA_OVERRUN = 0x02, - AUDIO_EP_CTRL_DATA_UNDERRUN = 0x03, -} audio_EP_control_selector_t; + AUDIO20_EP_CTRL_UNDEF = 0x00, + AUDIO20_EP_CTRL_PITCH = 0x01, + AUDIO20_EP_CTRL_DATA_OVERRUN = 0x02, + AUDIO20_EP_CTRL_DATA_UNDERRUN = 0x03, +} audio20_EP_control_selector_t; /// Terminal Types /// 2.1 - Audio Class-Terminal Types UAC2 typedef enum { - AUDIO_TERM_TYPE_USB_UNDEFINED = 0x0100, - AUDIO_TERM_TYPE_USB_STREAMING = 0x0101, - AUDIO_TERM_TYPE_USB_VENDOR_SPEC = 0x01FF, -} audio_terminal_type_t; + AUDIO20_TERM_TYPE_USB_UNDEFINED = 0x0100, + AUDIO20_TERM_TYPE_USB_STREAMING = 0x0101, + AUDIO20_TERM_TYPE_USB_VENDOR_SPEC = 0x01FF, +} audio20_terminal_type_t; /// 2.2 - Audio Class-Input Terminal Types UAC2 typedef enum { - AUDIO_TERM_TYPE_IN_UNDEFINED = 0x0200, - AUDIO_TERM_TYPE_IN_GENERIC_MIC = 0x0201, - AUDIO_TERM_TYPE_IN_DESKTOP_MIC = 0x0202, - AUDIO_TERM_TYPE_IN_PERSONAL_MIC = 0x0203, - AUDIO_TERM_TYPE_IN_OMNI_MIC = 0x0204, - AUDIO_TERM_TYPE_IN_ARRAY_MIC = 0x0205, - AUDIO_TERM_TYPE_IN_PROC_ARRAY_MIC = 0x0206, -} audio_terminal_input_type_t; + AUDIO20_TERM_TYPE_IN_UNDEFINED = 0x0200, + AUDIO20_TERM_TYPE_IN_GENERIC_MIC = 0x0201, + AUDIO20_TERM_TYPE_IN_DESKTOP_MIC = 0x0202, + AUDIO20_TERM_TYPE_IN_PERSONAL_MIC = 0x0203, + AUDIO20_TERM_TYPE_IN_OMNI_MIC = 0x0204, + AUDIO20_TERM_TYPE_IN_ARRAY_MIC = 0x0205, + AUDIO20_TERM_TYPE_IN_PROC_ARRAY_MIC = 0x0206, +} audio20_terminal_input_type_t; /// 2.3 - Audio Class-Output Terminal Types UAC2 typedef enum { - AUDIO_TERM_TYPE_OUT_UNDEFINED = 0x0300, - AUDIO_TERM_TYPE_OUT_GENERIC_SPEAKER = 0x0301, - AUDIO_TERM_TYPE_OUT_HEADPHONES = 0x0302, - AUDIO_TERM_TYPE_OUT_HEAD_MNT_DISP_AUIDO = 0x0303, - AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER = 0x0304, - AUDIO_TERM_TYPE_OUT_ROOM_SPEAKER = 0x0305, - AUDIO_TERM_TYPE_OUT_COMMUNICATION_SPEAKER = 0x0306, - AUDIO_TERM_TYPE_OUT_LOW_FRQ_EFFECTS_SPEAKER = 0x0307, -} audio_terminal_output_type_t; + AUDIO20_TERM_TYPE_OUT_UNDEFINED = 0x0300, + AUDIO20_TERM_TYPE_OUT_GENERIC_SPEAKER = 0x0301, + AUDIO20_TERM_TYPE_OUT_HEADPHONES = 0x0302, + AUDIO20_TERM_TYPE_OUT_HEAD_MNT_DISP_AUIDO = 0x0303, + AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER = 0x0304, + AUDIO20_TERM_TYPE_OUT_ROOM_SPEAKER = 0x0305, + AUDIO20_TERM_TYPE_OUT_COMMUNICATION_SPEAKER = 0x0306, + AUDIO20_TERM_TYPE_OUT_LOW_FRQ_EFFECTS_SPEAKER = 0x0307, +} audio20_terminal_output_type_t; /// Rest is yet to be implemented @@ -471,226 +870,230 @@ typedef enum /// A.1 - Audio Class-Format Type Codes UAC2 typedef enum { - AUDIO_FORMAT_TYPE_UNDEFINED = 0x00, - AUDIO_FORMAT_TYPE_I = 0x01, - AUDIO_FORMAT_TYPE_II = 0x02, - AUDIO_FORMAT_TYPE_III = 0x03, - AUDIO_FORMAT_TYPE_IV = 0x04, - AUDIO_EXT_FORMAT_TYPE_I = 0x81, - AUDIO_EXT_FORMAT_TYPE_II = 0x82, - AUDIO_EXT_FORMAT_TYPE_III = 0x83, -} audio_format_type_t; + AUDIO20_FORMAT_TYPE_UNDEFINED = 0x00, + AUDIO20_FORMAT_TYPE_I = 0x01, + AUDIO20_FORMAT_TYPE_II = 0x02, + AUDIO20_FORMAT_TYPE_III = 0x03, + AUDIO20_FORMAT_TYPE_IV = 0x04, + AUDIO20_EXT_FORMAT_TYPE_I = 0x81, + AUDIO20_EXT_FORMAT_TYPE_II = 0x82, + AUDIO20_EXT_FORMAT_TYPE_III = 0x83, +} audio20_format_type_t; // A.2.1 - Audio Class-Audio Data Format Type I UAC2 typedef enum { - AUDIO_DATA_FORMAT_TYPE_I_PCM = (uint32_t) (1 << 0), - AUDIO_DATA_FORMAT_TYPE_I_PCM8 = (uint32_t) (1 << 1), - AUDIO_DATA_FORMAT_TYPE_I_IEEE_FLOAT = (uint32_t) (1 << 2), - AUDIO_DATA_FORMAT_TYPE_I_ALAW = (uint32_t) (1 << 3), - AUDIO_DATA_FORMAT_TYPE_I_MULAW = (uint32_t) (1 << 4), - AUDIO_DATA_FORMAT_TYPE_I_RAW_DATA = 0x80000000u, -} audio_data_format_type_I_t; + AUDIO20_DATA_FORMAT_TYPE_I_PCM = (uint32_t) (1 << 0), + AUDIO20_DATA_FORMAT_TYPE_I_PCM8 = (uint32_t) (1 << 1), + AUDIO20_DATA_FORMAT_TYPE_I_IEEE_FLOAT = (uint32_t) (1 << 2), + AUDIO20_DATA_FORMAT_TYPE_I_ALAW = (uint32_t) (1 << 3), + AUDIO20_DATA_FORMAT_TYPE_I_MULAW = (uint32_t) (1 << 4), + AUDIO20_DATA_FORMAT_TYPE_I_RAW_DATA = 0x80000000u, +} audio20_data_format_type_I_t; + +/// Audio Class-Audio Channel Configuration UAC2 (Table A-11) +typedef enum +{ + AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED = 0x00000000, + AUDIO20_CHANNEL_CONFIG_FRONT_LEFT = 0x00000001, + AUDIO20_CHANNEL_CONFIG_FRONT_RIGHT = 0x00000002, + AUDIO20_CHANNEL_CONFIG_FRONT_CENTER = 0x00000004, + AUDIO20_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x00000008, + AUDIO20_CHANNEL_CONFIG_BACK_LEFT = 0x00000010, + AUDIO20_CHANNEL_CONFIG_BACK_RIGHT = 0x00000020, + AUDIO20_CHANNEL_CONFIG_FRONT_LEFT_OF_CENTER = 0x00000040, + AUDIO20_CHANNEL_CONFIG_FRONT_RIGHT_OF_CENTER = 0x00000080, + AUDIO20_CHANNEL_CONFIG_BACK_CENTER = 0x00000100, + AUDIO20_CHANNEL_CONFIG_SIDE_LEFT = 0x00000200, + AUDIO20_CHANNEL_CONFIG_SIDE_RIGHT = 0x00000400, + AUDIO20_CHANNEL_CONFIG_TOP_CENTER = 0x00000800, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_LEFT = 0x00001000, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_CENTER = 0x00002000, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_RIGHT = 0x00004000, + AUDIO20_CHANNEL_CONFIG_TOP_BACK_LEFT = 0x00008000, + AUDIO20_CHANNEL_CONFIG_TOP_BACK_CENTER = 0x00010000, + AUDIO20_CHANNEL_CONFIG_TOP_BACK_RIGHT = 0x00020000, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_LEFT_OF_CENTER = 0x00040000, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_RIGHT_OF_CENTER = 0x00080000, + AUDIO20_CHANNEL_CONFIG_LEFT_LOW_FRQ_EFFECTS = 0x00100000, + AUDIO20_CHANNEL_CONFIG_RIGHT_LOW_FRQ_EFFECTS = 0x00200000, + AUDIO20_CHANNEL_CONFIG_TOP_SIDE_LEFT = 0x00400000, + AUDIO20_CHANNEL_CONFIG_TOP_SIDE_RIGHT = 0x00800000, + AUDIO20_CHANNEL_CONFIG_BOTTOM_CENTER = 0x01000000, + AUDIO20_CHANNEL_CONFIG_BACK_LEFT_OF_CENTER = 0x02000000, + AUDIO20_CHANNEL_CONFIG_BACK_RIGHT_OF_CENTER = 0x04000000, + AUDIO20_CHANNEL_CONFIG_RAW_DATA = 0x80000000, +} audio20_channel_config_t; /// All remaining definitions are taken from the descriptor descriptions in the UAC2 main specification /// Audio Class-Control Values UAC2 typedef enum { - AUDIO_CTRL_NONE = 0x00, ///< No Host access - AUDIO_CTRL_R = 0x01, ///< Host read access only - AUDIO_CTRL_RW = 0x03, ///< Host read write access -} audio_control_t; + AUDIO20_CTRL_NONE = 0x00, ///< No Host access + AUDIO20_CTRL_R = 0x01, ///< Host read access only + AUDIO20_CTRL_RW = 0x03, ///< Host read write access +} audio20_control_t; /// Audio Class-Specific AC Interface Descriptor Controls UAC2 typedef enum { - AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS = 0, -} audio_cs_ac_interface_control_pos_t; + AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS = 0, +} audio20_cs_ac_interface_control_pos_t; /// Audio Class-Specific AS Interface Descriptor Controls UAC2 typedef enum { - AUDIO_CS_AS_INTERFACE_CTRL_ACTIVE_ALT_SET_POS = 0, - AUDIO_CS_AS_INTERFACE_CTRL_VALID_ALT_SET_POS = 2, -} audio_cs_as_interface_control_pos_t; + AUDIO20_CS_AS_INTERFACE_CTRL_ACTIVE_ALT_SET_POS = 0, + AUDIO20_CS_AS_INTERFACE_CTRL_VALID_ALT_SET_POS = 2, +} audio20_cs_as_interface_control_pos_t; /// Audio Class-Specific AS Isochronous Data EP Attributes UAC2 typedef enum { - AUDIO_CS_AS_ISO_DATA_EP_ATT_MAX_PACKETS_ONLY = 0x80, - AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK = 0x00, -} audio_cs_as_iso_data_ep_attribute_t; + AUDIO20_CS_AS_ISO_DATA_EP_ATT_MAX_PACKETS_ONLY = 0x80, + AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK = 0x00, +} audio20_cs_as_iso_data_ep_attribute_t; /// Audio Class-Specific AS Isochronous Data EP Controls UAC2 typedef enum { - AUDIO_CS_AS_ISO_DATA_EP_CTRL_PITCH_POS = 0, - AUDIO_CS_AS_ISO_DATA_EP_CTRL_DATA_OVERRUN_POS = 2, - AUDIO_CS_AS_ISO_DATA_EP_CTRL_DATA_UNDERRUN_POS = 4, -} audio_cs_as_iso_data_ep_control_pos_t; + AUDIO20_CS_AS_ISO_DATA_EP_CTRL_PITCH_POS = 0, + AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_OVERRUN_POS = 2, + AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_UNDERRUN_POS = 4, +} audio20_cs_as_iso_data_ep_control_pos_t; /// Audio Class-Specific AS Isochronous Data EP Lock Delay Units UAC2 typedef enum { - AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED = 0x00, - AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC = 0x01, - AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_PCM_SAMPLES = 0x02, -} audio_cs_as_iso_data_ep_lock_delay_unit_t; + AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED = 0x00, + AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC = 0x01, + AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_PCM_SAMPLES = 0x02, +} audio20_cs_as_iso_data_ep_lock_delay_unit_t; /// Audio Class-Clock Source Attributes UAC2 typedef enum { - AUDIO_CLOCK_SOURCE_ATT_EXT_CLK = 0x00, - AUDIO_CLOCK_SOURCE_ATT_INT_FIX_CLK = 0x01, - AUDIO_CLOCK_SOURCE_ATT_INT_VAR_CLK = 0x02, - AUDIO_CLOCK_SOURCE_ATT_INT_PRO_CLK = 0x03, - AUDIO_CLOCK_SOURCE_ATT_CLK_SYC_SOF = 0x04, -} audio_clock_source_attribute_t; + AUDIO20_CLOCK_SOURCE_ATT_EXT_CLK = 0x00, + AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK = 0x01, + AUDIO20_CLOCK_SOURCE_ATT_INT_VAR_CLK = 0x02, + AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK = 0x03, + AUDIO20_CLOCK_SOURCE_ATT_CLK_SYC_SOF = 0x04, +} audio20_clock_source_attribute_t; /// Audio Class-Clock Source Controls UAC2 typedef enum { - AUDIO_CLOCK_SOURCE_CTRL_CLK_FRQ_POS = 0, - AUDIO_CLOCK_SOURCE_CTRL_CLK_VAL_POS = 2, -} audio_clock_source_control_pos_t; + AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS = 0, + AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS = 2, +} audio20_clock_source_control_pos_t; /// Audio Class-Clock Selector Controls UAC2 typedef enum { - AUDIO_CLOCK_SELECTOR_CTRL_POS = 0, -} audio_clock_selector_control_pos_t; + AUDIO20_CLOCK_SELECTOR_CTRL_POS = 0, +} audio20_clock_selector_control_pos_t; /// Audio Class-Clock Multiplier Controls UAC2 typedef enum { - AUDIO_CLOCK_MULTIPLIER_CTRL_NUMERATOR_POS = 0, - AUDIO_CLOCK_MULTIPLIER_CTRL_DENOMINATOR_POS = 2, -} audio_clock_multiplier_control_pos_t; + AUDIO20_CLOCK_MULTIPLIER_CTRL_NUMERATOR_POS = 0, + AUDIO20_CLOCK_MULTIPLIER_CTRL_DENOMINATOR_POS = 2, +} audio20_clock_multiplier_control_pos_t; /// Audio Class-Input Terminal Controls UAC2 typedef enum { - AUDIO_IN_TERM_CTRL_CPY_PROT_POS = 0, - AUDIO_IN_TERM_CTRL_CONNECTOR_POS = 2, - AUDIO_IN_TERM_CTRL_OVERLOAD_POS = 4, - AUDIO_IN_TERM_CTRL_CLUSTER_POS = 6, - AUDIO_IN_TERM_CTRL_UNDERFLOW_POS = 8, - AUDIO_IN_TERM_CTRL_OVERFLOW_POS = 10, -} audio_terminal_input_control_pos_t; + AUDIO20_IN_TERM_CTRL_CPY_PROT_POS = 0, + AUDIO20_IN_TERM_CTRL_CONNECTOR_POS = 2, + AUDIO20_IN_TERM_CTRL_OVERLOAD_POS = 4, + AUDIO20_IN_TERM_CTRL_CLUSTER_POS = 6, + AUDIO20_IN_TERM_CTRL_UNDERFLOW_POS = 8, + AUDIO20_IN_TERM_CTRL_OVERFLOW_POS = 10, +} audio20_terminal_input_control_pos_t; /// Audio Class-Output Terminal Controls UAC2 typedef enum { - AUDIO_OUT_TERM_CTRL_CPY_PROT_POS = 0, - AUDIO_OUT_TERM_CTRL_CONNECTOR_POS = 2, - AUDIO_OUT_TERM_CTRL_OVERLOAD_POS = 4, - AUDIO_OUT_TERM_CTRL_UNDERFLOW_POS = 6, - AUDIO_OUT_TERM_CTRL_OVERFLOW_POS = 8, -} audio_terminal_output_control_pos_t; + AUDIO20_OUT_TERM_CTRL_CPY_PROT_POS = 0, + AUDIO20_OUT_TERM_CTRL_CONNECTOR_POS = 2, + AUDIO20_OUT_TERM_CTRL_OVERLOAD_POS = 4, + AUDIO20_OUT_TERM_CTRL_UNDERFLOW_POS = 6, + AUDIO20_OUT_TERM_CTRL_OVERFLOW_POS = 8, +} audio20_terminal_output_control_pos_t; /// Audio Class-Feature Unit Controls UAC2 typedef enum { - AUDIO_FEATURE_UNIT_CTRL_MUTE_POS = 0, - AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS = 2, - AUDIO_FEATURE_UNIT_CTRL_BASS_POS = 4, - AUDIO_FEATURE_UNIT_CTRL_MID_POS = 6, - AUDIO_FEATURE_UNIT_CTRL_TREBLE_POS = 8, - AUDIO_FEATURE_UNIT_CTRL_GRAPHIC_EQU_POS = 10, - AUDIO_FEATURE_UNIT_CTRL_AGC_POS = 12, - AUDIO_FEATURE_UNIT_CTRL_DELAY_POS = 14, - AUDIO_FEATURE_UNIT_CTRL_BASS_BOOST_POS = 16, - AUDIO_FEATURE_UNIT_CTRL_LOUDNESS_POS = 18, - AUDIO_FEATURE_UNIT_CTRL_INPUT_GAIN_POS = 20, - AUDIO_FEATURE_UNIT_CTRL_INPUT_GAIN_PAD_POS = 22, - AUDIO_FEATURE_UNIT_CTRL_PHASE_INV_POS = 24, - AUDIO_FEATURE_UNIT_CTRL_UNDERFLOW_POS = 26, - AUDIO_FEATURE_UNIT_CTRL_OVERFLOW_POS = 28, -} audio_feature_unit_control_pos_t; - -/// Audio Class-Audio Channel Configuration UAC2 -typedef enum -{ - AUDIO_CHANNEL_CONFIG_NON_PREDEFINED = 0x00000000, - AUDIO_CHANNEL_CONFIG_FRONT_LEFT = 0x00000001, - AUDIO_CHANNEL_CONFIG_FRONT_RIGHT = 0x00000002, - AUDIO_CHANNEL_CONFIG_FRONT_CENTER = 0x00000004, - AUDIO_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x00000008, - AUDIO_CHANNEL_CONFIG_BACK_LEFT = 0x00000010, - AUDIO_CHANNEL_CONFIG_BACK_RIGHT = 0x00000020, - AUDIO_CHANNEL_CONFIG_FRONT_LEFT_OF_CENTER = 0x00000040, - AUDIO_CHANNEL_CONFIG_FRONT_RIGHT_OF_CENTER = 0x00000080, - AUDIO_CHANNEL_CONFIG_BACK_CENTER = 0x00000100, - AUDIO_CHANNEL_CONFIG_SIDE_LEFT = 0x00000200, - AUDIO_CHANNEL_CONFIG_SIDE_RIGHT = 0x00000400, - AUDIO_CHANNEL_CONFIG_TOP_CENTER = 0x00000800, - AUDIO_CHANNEL_CONFIG_TOP_FRONT_LEFT = 0x00001000, - AUDIO_CHANNEL_CONFIG_TOP_FRONT_CENTER = 0x00002000, - AUDIO_CHANNEL_CONFIG_TOP_FRONT_RIGHT = 0x00004000, - AUDIO_CHANNEL_CONFIG_TOP_BACK_LEFT = 0x00008000, - AUDIO_CHANNEL_CONFIG_TOP_BACK_CENTER = 0x00010000, - AUDIO_CHANNEL_CONFIG_TOP_BACK_RIGHT = 0x00020000, - AUDIO_CHANNEL_CONFIG_TOP_FRONT_LEFT_OF_CENTER = 0x00040000, - AUDIO_CHANNEL_CONFIG_TOP_FRONT_RIGHT_OF_CENTER = 0x00080000, - AUDIO_CHANNEL_CONFIG_LEFT_LOW_FRQ_EFFECTS = 0x00100000, - AUDIO_CHANNEL_CONFIG_RIGHT_LOW_FRQ_EFFECTS = 0x00200000, - AUDIO_CHANNEL_CONFIG_TOP_SIDE_LEFT = 0x00400000, - AUDIO_CHANNEL_CONFIG_TOP_SIDE_RIGHT = 0x00800000, - AUDIO_CHANNEL_CONFIG_BOTTOM_CENTER = 0x01000000, - AUDIO_CHANNEL_CONFIG_BACK_LEFT_OF_CENTER = 0x02000000, - AUDIO_CHANNEL_CONFIG_BACK_RIGHT_OF_CENTER = 0x04000000, - AUDIO_CHANNEL_CONFIG_RAW_DATA = 0x80000000u, -} audio_channel_config_t; - -/// AUDIO Channel Cluster Descriptor (4.1) + AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS = 0, + AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS = 2, + AUDIO20_FEATURE_UNIT_CTRL_BASS_POS = 4, + AUDIO20_FEATURE_UNIT_CTRL_MID_POS = 6, + AUDIO20_FEATURE_UNIT_CTRL_TREBLE_POS = 8, + AUDIO20_FEATURE_UNIT_CTRL_GRAPHIC_EQU_POS = 10, + AUDIO20_FEATURE_UNIT_CTRL_AGC_POS = 12, + AUDIO20_FEATURE_UNIT_CTRL_DELAY_POS = 14, + AUDIO20_FEATURE_UNIT_CTRL_BASS_BOOST_POS = 16, + AUDIO20_FEATURE_UNIT_CTRL_LOUDNESS_POS = 18, + AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_POS = 20, + AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_PAD_POS = 22, + AUDIO20_FEATURE_UNIT_CTRL_PHASE_INV_POS = 24, + AUDIO20_FEATURE_UNIT_CTRL_UNDERFLOW_POS = 26, + AUDIO20_FEATURE_UNIT_CTRL_OVERFLOW_POS = 28, +} audio20_feature_unit_control_pos_t; + +//--------------------------------------------------------------------+ +// USB AUDIO CLASS 2.0 (UAC2) DESCRIPTORS +//--------------------------------------------------------------------+ + +/// AUDIO Channel Cluster Descriptor UAC2 (4.1) typedef struct TU_ATTR_PACKED { uint8_t bNrChannels; ///< Number of channels currently connected. - audio_channel_config_t bmChannelConfig; ///< Bitmap according to 'audio_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. + audio20_channel_config_t bmChannelConfig; ///< Bitmap according to 'audio20_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first inserted channel with a non-predefined spatial location. -} audio_desc_channel_cluster_t; +} audio20_desc_channel_cluster_t; -/// AUDIO Class-Specific AC Interface Header Descriptor (4.7.2) +/// AUDIO Class-Specific AC Interface Header Descriptor UAC2 (4.7.2) typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor in bytes: 9. uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_HEADER. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_HEADER. uint16_t bcdADC ; ///< Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: U16_TO_U8S_LE(0x0200). - uint8_t bCategory ; ///< Constant, indicating the primary use of this audio function, as intended by the manufacturer. See: audio_function_t. + uint8_t bCategory ; ///< Constant, indicating the primary use of this audio function, as intended by the manufacturer. See: audio20_function_code_t. uint16_t wTotalLength ; ///< Total number of bytes returned for the class-specific AudioControl interface descriptor. Includes the combined length of this descriptor header and all Clock Source, Unit and Terminal descriptors. - uint8_t bmControls ; ///< See: audio_cs_ac_interface_control_pos_t. -} audio_desc_cs_ac_interface_t; -TU_VERIFY_STATIC(sizeof(audio_desc_cs_ac_interface_t) == 9, "size is not correct"); + uint8_t bmControls ; ///< See: audio20_cs_ac_interface_control_pos_t. +} audio20_desc_cs_ac_interface_t; +TU_VERIFY_STATIC(sizeof(audio20_desc_cs_ac_interface_t) == 9, "size is not correct"); -/// AUDIO Clock Source Descriptor (4.7.2.1) +/// AUDIO Clock Source Descriptor UAC2 (4.7.2.1) typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor in bytes: 8. uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_CLOCK_SOURCE. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE. uint8_t bClockID ; ///< Constant uniquely identifying the Clock Source Entity within the audio function. This value is used in all requests to address this Entity. - uint8_t bmAttributes ; ///< See: audio_clock_source_attribute_t. - uint8_t bmControls ; ///< See: audio_clock_source_control_pos_t. + uint8_t bmAttributes ; ///< See: audio20_clock_source_attribute_t. + uint8_t bmControls ; ///< See: audio20_clock_source_control_pos_t. uint8_t bAssocTerminal ; ///< Terminal ID of the Terminal that is associated with this Clock Source. uint8_t iClockSource ; ///< Index of a string descriptor, describing the Clock Source Entity. -} audio_desc_clock_source_t; +} audio20_desc_clock_source_t; -/// AUDIO Clock Selector Descriptor (4.7.2.2) for ONE pin +/// AUDIO Clock Selector Descriptor UAC2 (4.7.2.2) for ONE pin typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor, in bytes: 7+p. uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_CLOCK_SELECTOR. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR. uint8_t bClockID ; ///< Constant uniquely identifying the Clock Selector Entity within the audio function. This value is used in all requests to address this Entity. uint8_t bNrInPins ; ///< Number of Input Pins of this Unit: p = 1 thus bNrInPins = 1. uint8_t baCSourceID ; ///< ID of the Clock Entity to which the first Clock Input Pin of this Clock Selector Entity is connected.. - uint8_t bmControls ; ///< See: audio_clock_selector_control_pos_t. + uint8_t bmControls ; ///< See: audio20_clock_selector_control_pos_t. uint8_t iClockSource ; ///< Index of a string descriptor, describing the Clock Selector Entity. -} audio_desc_clock_selector_t; +} audio20_desc_clock_selector_t; /// AUDIO Clock Selector Descriptor (4.7.2.2) for multiple pins -#define audio_desc_clock_selector_n_t(source_num) \ +#define audio20_desc_clock_selector_n_t(source_num) \ struct TU_ATTR_PACKED { \ uint8_t bLength ; \ uint8_t bDescriptorType ; \ @@ -704,17 +1107,17 @@ typedef struct TU_ATTR_PACKED uint8_t iClockSource ; \ } -/// AUDIO Clock Multiplier Descriptor (4.7.2.3) +/// AUDIO Clock Multiplier Descriptor UAC2 (4.7.2.3) typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor, in bytes: 7. uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_CLOCK_MULTIPLIER. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER. uint8_t bClockID ; ///< Constant uniquely identifying the Clock Multiplier Entity within the audio function. This value is used in all requests to address this Entity. uint8_t bCSourceID ; ///< ID of the Clock Entity to which the last Clock Input Pin of this Clock Selector Entity is connected. - uint8_t bmControls ; ///< See: audio_clock_multiplier_control_pos_t. + uint8_t bmControls ; ///< See: audio20_clock_multiplier_control_pos_t. uint8_t iClockSource ; ///< Index of a string descriptor, describing the Clock Multiplier Entity. -} audio_desc_clock_multiplier_t; +} audio20_desc_clock_multiplier_t; /// AUDIO Input Terminal Descriptor(4.7.2.4) typedef struct TU_ATTR_PACKED @@ -727,43 +1130,43 @@ typedef struct TU_ATTR_PACKED uint8_t bAssocTerminal ; ///< ID of the Output Terminal to which this Input Terminal is associated. uint8_t bCSourceID ; ///< ID of the Clock Entity to which this Input Terminal is connected. uint8_t bNrChannels ; ///< Number of logical output channels in the Terminal’s output audio channel cluster. - uint32_t bmChannelConfig ; ///< Describes the spatial location of the logical channels. See:audio_channel_config_t. + uint32_t bmChannelConfig ; ///< Describes the spatial location of the logical channels. See:audio20_channel_config_t. uint8_t iChannelNames ; ///< Index of a string descriptor, describing the name of the first logical channel. uint16_t bmControls ; ///< See: audio_terminal_input_control_pos_t. uint8_t iTerminal ; ///< Index of a string descriptor, describing the Input Terminal. -} audio_desc_input_terminal_t; +} audio20_desc_input_terminal_t; -/// AUDIO Output Terminal Descriptor(4.7.2.5) +/// AUDIO Output Terminal Descriptor UAC2 (4.7.2.5) typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor, in bytes: 12. uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_OUTPUT_TERMINAL. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL. uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. This value is used in all requests to address this Terminal. - uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. See: audio_terminal_type_t for USB streaming and audio_terminal_output_type_t for other output types. + uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. See: audio20_terminal_type_t for USB streaming and audio20_terminal_output_type_t for other output types. uint8_t bAssocTerminal ; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. uint8_t bSourceID ; ///< ID of the Unit or Terminal to which this Terminal is connected. uint8_t bCSourceID ; ///< ID of the Clock Entity to which this Output Terminal is connected. - uint16_t bmControls ; ///< See: audio_terminal_output_type_t. + uint16_t bmControls ; ///< See: audio20_terminal_output_control_pos_t. uint8_t iTerminal ; ///< Index of a string descriptor, describing the Output Terminal. -} audio_desc_output_terminal_t; +} audio20_desc_output_terminal_t; -/// AUDIO Feature Unit Descriptor(4.7.2.8) for ONE channel +/// AUDIO Feature Unit Descriptor UAC2 (4.7.2.8) for ONE channel typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor, in bytes: 14. uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_FEATURE_UNIT. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT. uint8_t bUnitID ; ///< Constant uniquely identifying the Unit within the audio function. This value is used in all requests to address this Unit. uint8_t bSourceID ; ///< ID of the Unit or Terminal to which this Feature Unit is connected. struct TU_ATTR_PACKED { - uint32_t bmaControls ; ///< See: audio_feature_unit_control_pos_t. Controls0 is master channel 0 (always present) and Controls1 is logical channel 1. + uint32_t bmaControls ; ///< See: audio20_feature_unit_control_pos_t. Controls0 is master channel 0 (always present) and Controls1 is logical channel 1. } controls[2] ; uint8_t iTerminal ; ///< Index of a string descriptor, describing this Feature Unit. -} audio_desc_feature_unit_t; +} audio20_desc_feature_unit_t; /// AUDIO Feature Unit Descriptor(4.7.2.8) for multiple channels -#define audio_desc_feature_unit_n_t(ch_num)\ +#define audio20_desc_feature_unit_n_t(ch_num)\ struct TU_ATTR_PACKED { \ uint8_t bLength ; /* 6+(ch_num+1)*4 */\ uint8_t bDescriptorType ; \ @@ -781,38 +1184,38 @@ typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor, in bytes: 16. uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AS_INTERFACE_AS_GENERAL. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_AS_GENERAL. uint8_t bTerminalLink ; ///< The Terminal ID of the Terminal to which this interface is connected. - uint8_t bmControls ; ///< See: audio_cs_as_interface_control_pos_t. - uint8_t bFormatType ; ///< Constant identifying the Format Type the AudioStreaming interface is using. See: audio_format_type_t. - uint32_t bmFormats ; ///< The Audio Data Format(s) that can be used to communicate with this interface.See: audio_data_format_type_I_t. + uint8_t bmControls ; ///< See: audio20_cs_as_interface_control_pos_t. + uint8_t bFormatType ; ///< Constant identifying the Format Type the AudioStreaming interface is using. See: audio20_format_type_t. + uint32_t bmFormats ; ///< The Audio Data Format(s) that can be used to communicate with this interface.See: audio20_data_format_type_I_t. uint8_t bNrChannels ; ///< Number of physical channels in the AS Interface audio channel cluster. - uint32_t bmChannelConfig ; ///< Describes the spatial location of the physical channels. See: audio_channel_config_t. + uint32_t bmChannelConfig ; ///< Describes the spatial location of the physical channels. See: audio20_channel_config_t. uint8_t iChannelNames ; ///< Index of a string descriptor, describing the name of the first physical channel. -} audio_desc_cs_as_interface_t; +} audio20_desc_cs_as_interface_t; /// AUDIO Type I Format Type Descriptor(2.3.1.6 - Audio Formats) typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor, in bytes: 6. uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AS_INTERFACE_FORMAT_TYPE. - uint8_t bFormatType ; ///< Constant identifying the Format Type the AudioStreaming interface is using. Value: AUDIO_FORMAT_TYPE_I. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE. + uint8_t bFormatType ; ///< Constant identifying the Format Type the AudioStreaming interface is using. Value: AUDIO20_FORMAT_TYPE_I. uint8_t bSubslotSize ; ///< The number of bytes occupied by one audio subslot. Can be 1, 2, 3 or 4. uint8_t bBitResolution ; ///< The number of effectively used bits from the available bits in an audio subslot. -} audio_desc_type_I_format_t; +} audio20_desc_type_I_format_t; /// AUDIO Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor, in bytes: 8. uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_EP_SUBTYPE_GENERAL. - uint8_t bmAttributes ; ///< See: audio_cs_as_iso_data_ep_attribute_t. - uint8_t bmControls ; ///< See: audio_cs_as_iso_data_ep_control_pos_t. - uint8_t bLockDelayUnits ; ///< Indicates the units used for the wLockDelay field. See: audio_cs_as_iso_data_ep_lock_delay_unit_t. + uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_EP_SUBTYPE_GENERAL. + uint8_t bmAttributes ; ///< See: audio20_cs_as_iso_data_ep_attribute_t. + uint8_t bmControls ; ///< See: audio20_cs_as_iso_data_ep_control_pos_t. + uint8_t bLockDelayUnits ; ///< Indicates the units used for the wLockDelay field. See: audio20_cs_as_iso_data_ep_lock_delay_unit_t. uint16_t wLockDelay ; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. Units used depend on the value of the bLockDelayUnits field. -} audio_desc_cs_as_iso_data_ep_t; +} audio20_desc_cs_as_iso_data_ep_t; // 5.2.2 Control Request Layout typedef struct TU_ATTR_PACKED @@ -839,7 +1242,7 @@ typedef struct TU_ATTR_PACKED }; uint8_t bEntityID; uint16_t wLength; -} audio_control_request_t; +} audio20_control_request_t; //// 5.2.3 Control Request Parameter Block Layout @@ -847,53 +1250,24 @@ typedef struct TU_ATTR_PACKED typedef struct TU_ATTR_PACKED { int8_t bCur ; ///< The setting for the CUR attribute of the addressed Control -} audio_control_cur_1_t; +} audio20_control_cur_1_t; // 5.2.3.2 2-byte Control CUR Parameter Block typedef struct TU_ATTR_PACKED { int16_t bCur ; ///< The setting for the CUR attribute of the addressed Control -} audio_control_cur_2_t; +} audio20_control_cur_2_t; // 5.2.3.3 4-byte Control CUR Parameter Block typedef struct TU_ATTR_PACKED { int32_t bCur ; ///< The setting for the CUR attribute of the addressed Control -} audio_control_cur_4_t; - -// Use the following ONLY for RECEIVED data - compiler does not know how many subranges are defined! Use the one below for predefined lengths - or if you know what you are doing do what you like -// 5.2.3.1 1-byte Control RANGE Parameter Block -typedef struct TU_ATTR_PACKED { - uint16_t wNumSubRanges; - struct TU_ATTR_PACKED { - int8_t bMin ; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/ - int8_t bMax ; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/ - uint8_t bRes ; /*The setting for the RES attribute of the nth subrange of the addressed Control*/ - } subrange[] ; -} audio_control_range_1_t; - -// 5.2.3.2 2-byte Control RANGE Parameter Block -typedef struct TU_ATTR_PACKED { - uint16_t wNumSubRanges; - struct TU_ATTR_PACKED { - int16_t bMin ; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/ - int16_t bMax ; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/ - uint16_t bRes ; /*The setting for the RES attribute of the nth subrange of the addressed Control*/ - } subrange[] ; -} audio_control_range_2_t; +} audio20_control_cur_4_t; -// 5.2.3.3 4-byte Control RANGE Parameter Block -typedef struct TU_ATTR_PACKED { - uint16_t wNumSubRanges; - struct TU_ATTR_PACKED { - int32_t bMin ; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/ - int32_t bMax ; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/ - uint32_t bRes ; /*The setting for the RES attribute of the nth subrange of the addressed Control*/ - } subrange[] ; -} audio_control_range_4_t; +// Use the following ONLY for RECEIVED data - compiler does not know how many subranges are defined! Use the #define macros below for predefined lengths. // 5.2.3.1 1-byte Control RANGE Parameter Block -#define audio_control_range_1_n_t(numSubRanges) \ +#define audio20_control_range_1_n_t(numSubRanges) \ struct TU_ATTR_PACKED { \ uint16_t wNumSubRanges; \ struct TU_ATTR_PACKED { \ @@ -904,7 +1278,7 @@ typedef struct TU_ATTR_PACKED { } /// 5.2.3.2 2-byte Control RANGE Parameter Block -#define audio_control_range_2_n_t(numSubRanges) \ +#define audio20_control_range_2_n_t(numSubRanges) \ struct TU_ATTR_PACKED { \ uint16_t wNumSubRanges; \ struct TU_ATTR_PACKED { \ @@ -915,7 +1289,7 @@ typedef struct TU_ATTR_PACKED { } // 5.2.3.3 4-byte Control RANGE Parameter Block -#define audio_control_range_4_n_t(numSubRanges) \ +#define audio20_control_range_4_n_t(numSubRanges) \ struct TU_ATTR_PACKED { \ uint16_t wNumSubRanges; \ struct TU_ATTR_PACKED { \ @@ -948,7 +1322,7 @@ typedef struct TU_ATTR_PACKED uint8_t wIndex_entity_id; }; }; -} audio_interrupt_data_t; +} audio20_interrupt_data_t; /** @} */ diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 701411401..f795603c5 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -283,7 +283,7 @@ typedef struct // Encoding parameters - parameters are set when alternate AS interface is set by host #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - audio_format_type_t format_type_tx; + audio20_format_type_t format_type_tx; uint8_t n_channels_tx; uint8_t n_bytes_per_sample_tx; #endif @@ -597,7 +597,7 @@ static bool audiod_tx_xfer_isr(uint8_t rhport, audiod_function_t * audio, uint16 #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP // If no interrupt transmit is pending bytes get written into buffer and a transmit is scheduled - once transmit completed tud_audio_int_done_cb() is called in inform user -bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) { +bool tud_audio_int_n_write(uint8_t func_id, const audio20_interrupt_data_t *data) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); TU_VERIFY(_audiod_fct[func_id].ep_int != 0); @@ -606,7 +606,7 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) TU_VERIFY(usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int)); // Check length - if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, sizeof(audio_interrupt_data_t)) == 0) { + if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, sizeof(audio20_interrupt_data_t)) == 0) { // Schedule transmit TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf)), 0); } else { @@ -937,8 +937,8 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint _audiod_fct[i].interval_tx = desc_ep->bInterval; } } - } else if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AC_INTERFACE_OUTPUT_TERMINAL) { - if (tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) { + } else if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL) { + if (tu_unaligned_read16(p_desc + 4) == AUDIO20_TERM_TYPE_USB_STREAMING) { _audiod_fct[i].bclock_id_tx = p_desc[8]; } } @@ -1277,7 +1277,7 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO_CS_REQ_CUR) { + if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); } #endif @@ -1655,7 +1655,7 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE) { uint8_t entityID = TU_U16_HIGH(p_request->wIndex); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO_CS_REQ_CUR) { + if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); } } @@ -1673,7 +1673,7 @@ static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t * if (_audiod_fct[i].p_desc && ((tusb_desc_interface_t const *) _audiod_fct[i].p_desc)->bInterfaceNumber == itf) { // Get pointers after class specific AC descriptors and end of AC descriptors - entities are defined in between uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc);// Points to CS AC descriptor - uint8_t const *p_desc_end = ((audio_desc_cs_ac_interface_t const *) p_desc)->wTotalLength + p_desc; + uint8_t const *p_desc_end = ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength + p_desc; p_desc = tu_desc_next(p_desc);// Get past CS AC descriptor // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning @@ -1719,7 +1719,7 @@ static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id) { // Advance past AC descriptors - EP we look for are streaming EPs uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc); - p_desc += ((audio_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { @@ -1740,19 +1740,19 @@ static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t c p_desc = tu_desc_next(p_desc);// Exclude standard AS interface descriptor of current alternate interface descriptor // Look for a Class-Specific AS Interface Descriptor(4.9.2) to verify format type and format and also to get number of physical channels - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_AS_GENERAL) { - audio->n_channels_tx = ((audio_desc_cs_as_interface_t const *) p_desc)->bNrChannels; - audio->format_type_tx = (audio_format_type_t) (((audio_desc_cs_as_interface_t const *) p_desc)->bFormatType); + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_AS_GENERAL) { + audio->n_channels_tx = ((audio20_desc_cs_as_interface_t const *) p_desc)->bNrChannels; + audio->format_type_tx = (audio20_format_type_t) (((audio20_desc_cs_as_interface_t const *) p_desc)->bFormatType); // Look for a Type I Format Type Descriptor(2.3.1.6 - Audio Formats) p_desc = tu_desc_next(p_desc); - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_FORMAT_TYPE && ((audio_desc_type_I_format_t const *) p_desc)->bFormatType == AUDIO_FORMAT_TYPE_I) { - audio->n_bytes_per_sample_tx = ((audio_desc_type_I_format_t const *) p_desc)->bSubslotSize; + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE && ((audio20_desc_type_I_format_t const *) p_desc)->bFormatType == AUDIO20_FORMAT_TYPE_I) { + audio->n_bytes_per_sample_tx = ((audio20_desc_type_I_format_t const *) p_desc)->bSubslotSize; } } } static bool audiod_calc_tx_packet_sz(audiod_function_t *audio) { - TU_VERIFY(audio->format_type_tx == AUDIO_FORMAT_TYPE_I); + TU_VERIFY(audio->format_type_tx == AUDIO20_FORMAT_TYPE_I); TU_VERIFY(audio->n_channels_tx); TU_VERIFY(audio->n_bytes_per_sample_tx); TU_VERIFY(audio->interval_tx); diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index fd47c649d..ec710aed5 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -220,7 +220,7 @@ tu_fifo_t* tud_audio_n_get_ep_in_ff (uint8_t func_id); #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -bool tud_audio_int_n_write (uint8_t func_id, const audio_interrupt_data_t * data); +bool tud_audio_int_n_write (uint8_t func_id, const audio20_interrupt_data_t * data); #endif //--------------------------------------------------------------------+ @@ -244,7 +244,7 @@ static inline tu_fifo_t* tud_audio_get_ep_in_ff (void); // INT CTR API #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -static inline bool tud_audio_int_write (const audio_interrupt_data_t * data); +static inline bool tud_audio_int_write (const audio20_interrupt_data_t * data); #endif // Buffer control EP data and schedule a transmit @@ -434,7 +434,7 @@ TU_ATTR_ALWAYS_INLINE static inline tu_fifo_t* tud_audio_get_ep_in_ff(void) { #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -TU_ATTR_ALWAYS_INLINE static inline bool tud_audio_int_write(const audio_interrupt_data_t * data) { +TU_ATTR_ALWAYS_INLINE static inline bool tud_audio_int_write(const audio20_interrupt_data_t * data) { return tud_audio_int_n_write(0, data); } #endif diff --git a/src/class/midi/midi_host.c b/src/class/midi/midi_host.c index e6ace316c..46b8284ee 100644 --- a/src/class/midi/midi_host.c +++ b/src/class/midi/midi_host.c @@ -93,6 +93,8 @@ typedef struct { static midih_interface_t _midi_host[CFG_TUH_MIDI]; CFG_TUH_MEM_SECTION static midih_epbuf_t _midi_epbuf[CFG_TUH_MIDI]; +typedef audio10_desc_cs_ac_interface_n_t(1) midi10_desc_cs_ac_interface_t; + //--------------------------------------------------------------------+ // Helper //--------------------------------------------------------------------+ @@ -220,7 +222,7 @@ bool midih_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *d // driver after parsing the audio control interface and then resume parsing // the streaming audio interface. if (AUDIO_SUBCLASS_CONTROL == desc_itf->bInterfaceSubClass) { - TU_VERIFY(max_len > 2*sizeof(tusb_desc_interface_t) + sizeof(audio_desc_cs_ac_interface_t)); + TU_VERIFY(max_len > 2*sizeof(tusb_desc_interface_t) + sizeof(midi10_desc_cs_ac_interface_t)); p_desc = tu_desc_next(p_desc); TU_VERIFY(tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && -- cgit v1.3.1 From 9637a2006bdfa77911cd274f0b9cff7de7ae54e9 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 28 Sep 2025 17:17:10 +0200 Subject: More descriptors working Signed-off-by: HiFiPhile --- .../device/audio_4_channel_mic/src/tusb_config.h | 2 +- .../audio_4_channel_mic/src/usb_descriptors.c | 4 +- .../audio_4_channel_mic_freertos/src/tusb_config.h | 2 +- .../src/usb_descriptors.c | 4 +- examples/device/audio_test/src/tusb_config.h | 2 +- examples/device/audio_test/src/usb_descriptors.c | 4 +- .../device/audio_test_freertos/src/tusb_config.h | 2 +- .../audio_test_freertos/src/usb_descriptors.c | 4 +- .../device/audio_test_multi_rate/src/tusb_config.h | 2 +- .../audio_test_multi_rate/src/usb_descriptors.c | 4 +- .../audio_test_multi_rate/src/usb_descriptors.h | 74 +- examples/device/cdc_uac2/src/usb_descriptors.h | 124 +- examples/device/uac2_headset/src/main.c | 8 +- examples/device/uac2_headset/src/usb_descriptors.h | 128 +- examples/device/uac2_speaker_fb/src/tusb_config.h | 2 +- .../device/uac2_speaker_fb/src/usb_descriptors.c | 8 +- .../device/uac2_speaker_fb/src/usb_descriptors.h | 111 +- src/class/audio/audio.h | 1837 ++++++++++---------- src/class/audio/audio_device.c | 4 +- src/class/midi/midi_host.c | 4 +- src/common/tusb_common.h | 7 + src/common/tusb_compiler.h | 12 + src/device/usbd.h | 397 +++-- 23 files changed, 1439 insertions(+), 1307 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 0ee3ba2d0..718486941 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -105,7 +105,7 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 728a5f9ce..4caa4343b 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -80,7 +80,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_FOUR_CH_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN) #if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -101,7 +101,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) + TUD_AUDIO20_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index d973be2af..7a9a40c49 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -111,7 +111,7 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 diff --git a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c index 728a5f9ce..4caa4343b 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c @@ -80,7 +80,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_FOUR_CH_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN) #if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -101,7 +101,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) + TUD_AUDIO20_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 10bf53809..8a63cc521 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -108,7 +108,7 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_ONE_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index 9864377f6..af9b7f1dc 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -80,7 +80,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_ONE_CH_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -101,7 +101,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) + TUD_AUDIO20_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index c9dc50082..21b6a6f76 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -114,7 +114,7 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_ONE_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test_freertos/src/usb_descriptors.c b/examples/device/audio_test_freertos/src/usb_descriptors.c index 9864377f6..af9b7f1dc 100644 --- a/examples/device/audio_test_freertos/src/usb_descriptors.c +++ b/examples/device/audio_test_freertos/src/usb_descriptors.c @@ -80,7 +80,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_ONE_CH_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -101,7 +101,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) + TUD_AUDIO20_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index b48c0a0be..e92d20c49 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -122,7 +122,7 @@ extern "C" { // Have a look into audio_device.h for all configurations -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index f50e70a25..afdf95b79 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -82,7 +82,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -103,7 +103,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_epin*/ 0x80 | EPNUM_AUDIO) + TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_epin*/ 0x80 | EPNUM_AUDIO) }; TU_VERIFY_STATIC(sizeof(desc_configuration) == CONFIG_TOTAL_LEN, "Incorrect size"); diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index 277b22d7b..adf3305d2 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -35,68 +35,68 @@ #define UAC2_ENTITY_FEATURE_UNIT 0x02 -#define TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN\ +#define TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1)\ /* Interface 1, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 1, Alternate 1 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 1, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) -#define TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(_itfnum, _stridx, _epin) \ +#define TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(_itfnum, _stridx, _epin) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS | AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS, /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS | AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS, /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ UAC2_ENTITY_FEATURE_UNIT, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ UAC2_ENTITY_FEATURE_UNIT, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/cdc_uac2/src/usb_descriptors.h b/examples/device/cdc_uac2/src/usb_descriptors.h index efffbc0bb..afb74d5b5 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.h +++ b/examples/device/cdc_uac2/src/usb_descriptors.h @@ -49,110 +49,110 @@ enum ITF_NUM_TOTAL }; -#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ +#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ /* Interface 1, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 1, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 1, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 2, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 2, Alternate 1 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 2, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) #define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ 3, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ 3, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_stridx*/ 0x00, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS)),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 602225df5..6cfab946b 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -387,14 +387,14 @@ void audio_control_task(void) { } // 6.1 Interrupt Data Message - const audio20_interrupt_data_t data = { + const audio_interrupt_data_t data = {.v2 = { .bInfo = 0, // Class-specific interrupt, originated from an interface - .bAttribute = AUDIO20_CS_REQ_CUR, // Caused by current settings + .bAttribute = AUDIO20_CS_REQ_CUR, // Caused by current settings .wValue_cn_or_mcn = 0, // CH0: master volume - .wValue_cs = AUDIO20_FU_CTRL_VOLUME, // Volume change + .wValue_cs = AUDIO20_FU_CTRL_VOLUME, // Volume change .wIndex_ep_or_int = 0, // From the interface itself .wIndex_entity_id = UAC2_ENTITY_SPK_FEATURE_UNIT,// From feature unit - }; + }}; tud_audio_int_write(&data); } diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index 4138b5654..68d15a857 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -46,113 +46,113 @@ enum ITF_NUM_TOTAL }; -#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_STD_AC_INT_EP_LEN\ +#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_STD_AC_INT_EP_LEN\ /* Interface 1, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 1, Alternate 1 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 1, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 2, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 2, Alternate 1 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 2, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) #define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin, _epint) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_stridx*/ 0x00, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS)),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */\ - TUD_AUDIO_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ + TUD_AUDIO20_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/uac2_speaker_fb/src/tusb_config.h b/examples/device/uac2_speaker_fb/src/tusb_config.h index 18ab2ff96..284feff55 100644 --- a/examples/device/uac2_speaker_fb/src/tusb_config.h +++ b/examples/device/uac2_speaker_fb/src/tusb_config.h @@ -128,7 +128,7 @@ extern "C" { // AUDIO CLASS DRIVER CONFIGURATION //-------------------------------------------------------------------- -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_SPEAKER_STEREO_FB_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN // Can be enabled with Full-Speed device on OSX, which forces feedback EP size to 3, in this case CFG_QUIRK_OS_GUESSING can be disabled #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION 0 diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.c b/examples/device/uac2_speaker_fb/src/usb_descriptors.c index ee1b92225..9e12c88b4 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.c +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.c @@ -113,9 +113,9 @@ uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) //--------------------------------------------------------------------+ #if CFG_AUDIO_DEBUG - #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO_SPEAKER_STEREO_FB_DESC_LEN + TUD_HID_DESC_LEN) + #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN + TUD_HID_DESC_LEN) #else - #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO_SPEAKER_STEREO_FB_DESC_LEN) + #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN) #endif #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX @@ -150,7 +150,7 @@ uint8_t const desc_configuration_default[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, - TUD_AUDIO_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 4), + TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 4), #if CFG_AUDIO_DEBUG // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval @@ -166,7 +166,7 @@ uint8_t const desc_configuration_osx_fs[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, - TUD_AUDIO_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 3), + TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 3), #if CFG_AUDIO_DEBUG // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index 005aebeef..f71411dcf 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -26,57 +26,108 @@ #ifndef _USB_DESCRIPTORS_H_ #define _USB_DESCRIPTORS_H_ -// Defined in TUD_AUDIO_SPEAKER_STEREO_FB_DESCRIPTOR +// Defined in TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR #define UAC2_ENTITY_CLOCK 0x04 #define UAC2_ENTITY_INPUT_TERMINAL 0x01 #define UAC2_ENTITY_FEATURE_UNIT 0x02 #define UAC2_ENTITY_OUTPUT_TERMINAL 0x03 -#define TUD_AUDIO_SPEAKER_STEREO_FB_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN) +#define TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP_LEN) -#define TUD_AUDIO_SPEAKER_STEREO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, _epfbsize) \ +#define TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, _epfbsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ (AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ (AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS,/*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 4 : 1)\ + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 4 : 1) + +//--------------------------------------------------------------------+ +// UAC1 DESCRIPTOR TEMPLATES +//--------------------------------------------------------------------+ + +// Defined in TUD_AUDIO10_SPEAKER_STEREO_FB_DESCRIPTOR +#define UAC1_ENTITY_INPUT_TERMINAL 0x01 +#define UAC1_ENTITY_FEATURE_UNIT 0x02 +#define UAC1_ENTITY_OUTPUT_TERMINAL 0x03 + +#define TUD_AUDIO10_SPEAKER_STEREO_FB_DESC_LEN(_nfreqs) (\ + + TUD_AUDIO_DESC_STD_AC_LEN\ + + TUD_AUDIO10_DESC_CS_AC_LEN(1)\ + + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP_LEN) + +#define TUD_AUDIO10_SPEAKER_STEREO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, ...) \ + /* Standard AC Interface Descriptor(4.3.1) */\ + TUD_AUDIO10_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + /* Class-Specific AC Interface Header Descriptor(4.3.2) */\ + TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ (TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)), /*_itf*/ ((_itfnum)+1)),\ + /* Input Terminal Descriptor(4.3.2.1) */\ + TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_nchannels*/ 0x02, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_LEFT_FRONT | AUDIO10_CHANNEL_CONFIG_RIGHT_FRONT, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ + /* Output Terminal Descriptor(4.3.2.2) */\ + TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x00, /*_srcid*/ 0x02, /*_stridx*/ 0x00),\ + /* Feature Unit Descriptor(4.3.2.5) */\ + TUD_AUDIO10_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlmaster*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch1*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch2*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME)),\ + /* Standard AS Interface Descriptor(4.5.1) */\ + /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + /* Standard AS Interface Descriptor(4.5.1) */\ + /* Interface 1, Alternate 1 - alternate interface for data streaming */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ + /* Class-Specific AS Interface Descriptor(4.5.2) */\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_delay*/ 0x00, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + /* Type I Format Type Descriptor(2.2.5) */\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x02, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freqs*/ __VA_ARGS__),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01, /*_sync_ep*/ _epfb),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + /* Standard AS Isochronous Synch Endpoint Descriptor (4.6.2.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(/*_ep*/ _epfb, /*_bRefresh*/ 4) #endif diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index 7c4c85306..ecc7b9427 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -44,425 +44,472 @@ extern "C" { //--------------------------------------------------------------------+ /// A.2 - Audio Function Subclass Codes -typedef enum -{ +typedef enum { AUDIO_FUNCTION_SUBCLASS_UNDEFINED = 0x00, } audio_function_subclass_type_t; /// A.3 - Audio Function Protocol Codes -typedef enum -{ - AUDIO_FUNC_PROTOCOL_CODE_UNDEF = 0x00, - AUDIO_FUNC_PROTOCOL_CODE_V1 = 0x00, ///< Version 1.0 - same as undefined for backward compatibility - AUDIO_FUNC_PROTOCOL_CODE_V2 = 0x20, ///< Version 2.0 +typedef enum { + AUDIO_FUNC_PROTOCOL_CODE_UNDEF = 0x00, + AUDIO_FUNC_PROTOCOL_CODE_V1 = 0x00,///< Version 1.0 - same as undefined for backward compatibility + AUDIO_FUNC_PROTOCOL_CODE_V2 = 0x20,///< Version 2.0 } audio_function_protocol_code_t; /// A.5 - Audio Interface Subclass Codes -typedef enum -{ +typedef enum { AUDIO_SUBCLASS_UNDEFINED = 0x00, - AUDIO_SUBCLASS_CONTROL , ///< Audio Control - AUDIO_SUBCLASS_STREAMING , ///< Audio Streaming - AUDIO_SUBCLASS_MIDI_STREAMING , ///< MIDI Streaming + AUDIO_SUBCLASS_CONTROL, ///< Audio Control + AUDIO_SUBCLASS_STREAMING, ///< Audio Streaming + AUDIO_SUBCLASS_MIDI_STREAMING,///< MIDI Streaming } audio_subclass_type_t; /// A.6 - Audio Interface Protocol Codes -typedef enum -{ - AUDIO_INT_PROTOCOL_CODE_UNDEF = 0x00, - AUDIO_INT_PROTOCOL_CODE_V1 = 0x00, ///< Version 1.0 - same as undefined for backward compatibility - AUDIO_INT_PROTOCOL_CODE_V2 = 0x20, ///< Version 2.0 +typedef enum { + AUDIO_INT_PROTOCOL_CODE_UNDEF = 0x00, + AUDIO_INT_PROTOCOL_CODE_V1 = 0x00,///< Version 1.0 - same as undefined for backward compatibility + AUDIO_INT_PROTOCOL_CODE_V2 = 0x20,///< Version 2.0 } audio_interface_protocol_code_t; +/// Terminal Types + +/// 2.1 - Audio Class-Terminal Types +typedef enum { + AUDIO_TERM_TYPE_USB_UNDEFINED = 0x0100, + AUDIO_TERM_TYPE_USB_STREAMING = 0x0101, + AUDIO_TERM_TYPE_USB_VENDOR_SPEC = 0x01FF, +} audio_terminal_type_t; + +/// 2.2 - Audio Class-Input Terminal Types +typedef enum { + AUDIO_TERM_TYPE_IN_UNDEFINED = 0x0200, + AUDIO_TERM_TYPE_IN_GENERIC_MIC = 0x0201, + AUDIO_TERM_TYPE_IN_DESKTOP_MIC = 0x0202, + AUDIO_TERM_TYPE_IN_PERSONAL_MIC = 0x0203, + AUDIO_TERM_TYPE_IN_OMNI_MIC = 0x0204, + AUDIO_TERM_TYPE_IN_ARRAY_MIC = 0x0205, + AUDIO_TERM_TYPE_IN_PROC_ARRAY_MIC = 0x0206, +} audio_terminal_input_type_t; + +/// 2.3 - Audio Class-Output Terminal Types +typedef enum { + AUDIO_TERM_TYPE_OUT_UNDEFINED = 0x0300, + AUDIO_TERM_TYPE_OUT_GENERIC_SPEAKER = 0x0301, + AUDIO_TERM_TYPE_OUT_HEADPHONES = 0x0302, + AUDIO_TERM_TYPE_OUT_HEAD_MNT_DISP_AUIDO = 0x0303, + AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER = 0x0304, + AUDIO_TERM_TYPE_OUT_ROOM_SPEAKER = 0x0305, + AUDIO_TERM_TYPE_OUT_COMMUNICATION_SPEAKER = 0x0306, + AUDIO_TERM_TYPE_OUT_LOW_FRQ_EFFECTS_SPEAKER = 0x0307, +} audio_terminal_output_type_t; + +/// Rest is yet to be implemented + //--------------------------------------------------------------------+ // USB AUDIO CLASS 1.0 (UAC1) DEFINITIONS //--------------------------------------------------------------------+ -/// A.4 - Audio Class-Specific AC Interface Descriptor Subtypes UAC1 -typedef enum -{ +/// A.5 - Audio Class-Specific AC Interface Descriptor Subtypes UAC1 +typedef enum { AUDIO10_CS_AC_INTERFACE_AC_DESCRIPTOR_UNDEF = 0x00, - AUDIO10_CS_AC_INTERFACE_HEADER = 0x01, - AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, - AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, - AUDIO10_CS_AC_INTERFACE_MIXER_UNIT = 0x04, - AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, - AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, - AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT = 0x07, - AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT = 0x08, + AUDIO10_CS_AC_INTERFACE_HEADER = 0x01, + AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, + AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, + AUDIO10_CS_AC_INTERFACE_MIXER_UNIT = 0x04, + AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, + AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, + AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT = 0x07, + AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT = 0x08, } audio10_cs_ac_interface_subtype_t; -/// A.5 - Audio Class-Specific AS Interface Descriptor Subtypes UAC1 -typedef enum -{ +/// A.6 - Audio Class-Specific AS Interface Descriptor Subtypes UAC1 +typedef enum { AUDIO10_CS_AS_INTERFACE_AS_DESCRIPTOR_UNDEF = 0x00, - AUDIO10_CS_AS_INTERFACE_AS_GENERAL = 0x01, - AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, + AUDIO10_CS_AS_INTERFACE_AS_GENERAL = 0x01, + AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, } audio10_cs_as_interface_subtype_t; -/// A.6 - Audio Class-Specific EP Descriptor Subtypes UAC1 -typedef enum -{ - AUDIO10_CS_EP_SUBTYPE_UNDEF = 0x00, - AUDIO10_CS_EP_SUBTYPE_GENERAL = 0x01, +/// A.8 - Audio Class-Specific EP Descriptor Subtypes UAC1 +typedef enum { + AUDIO10_CS_EP_SUBTYPE_UNDEF = 0x00, + AUDIO10_CS_EP_SUBTYPE_GENERAL = 0x01, } audio10_cs_ep_subtype_t; -/// A.7 - Audio Class-Specific Request Codes UAC1 -typedef enum -{ - AUDIO10_CS_REQ_UNDEF = 0x00, - AUDIO10_CS_REQ_SET_CUR = 0x01, - AUDIO10_CS_REQ_GET_CUR = 0x81, - AUDIO10_CS_REQ_SET_MIN = 0x02, - AUDIO10_CS_REQ_GET_MIN = 0x82, - AUDIO10_CS_REQ_SET_MAX = 0x03, - AUDIO10_CS_REQ_GET_MAX = 0x83, - AUDIO10_CS_REQ_SET_RES = 0x04, - AUDIO10_CS_REQ_GET_RES = 0x84, - AUDIO10_CS_REQ_SET_MEM = 0x05, - AUDIO10_CS_REQ_GET_MEM = 0x85, - AUDIO10_CS_REQ_GET_STAT = 0xFF, +/// A.9 - Audio Class-Specific Request Codes UAC1 +typedef enum { + AUDIO10_CS_REQ_UNDEF = 0x00, + AUDIO10_CS_REQ_SET_CUR = 0x01, + AUDIO10_CS_REQ_GET_CUR = 0x81, + AUDIO10_CS_REQ_SET_MIN = 0x02, + AUDIO10_CS_REQ_GET_MIN = 0x82, + AUDIO10_CS_REQ_SET_MAX = 0x03, + AUDIO10_CS_REQ_GET_MAX = 0x83, + AUDIO10_CS_REQ_SET_RES = 0x04, + AUDIO10_CS_REQ_GET_RES = 0x84, + AUDIO10_CS_REQ_SET_MEM = 0x05, + AUDIO10_CS_REQ_GET_MEM = 0x85, + AUDIO10_CS_REQ_GET_STAT = 0xFF, } audio10_cs_req_t; -/// A.9.1 - Terminal Control Selectors UAC1 -typedef enum -{ - AUDIO10_TE_CTRL_UNDEF = 0x00, - AUDIO10_TE_CTRL_COPY_PROTECT = 0x01, +/// A.10.1 - Terminal Control Selectors UAC1 +typedef enum { + AUDIO10_TE_CTRL_UNDEF = 0x00, + AUDIO10_TE_CTRL_COPY_PROTECT = 0x01, } audio10_terminal_control_selector_t; -/// A.9.2 - Feature Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_FU_CTRL_UNDEF = 0x00, - AUDIO10_FU_CTRL_MUTE = 0x01, - AUDIO10_FU_CTRL_VOLUME = 0x02, - AUDIO10_FU_CTRL_BASS = 0x03, - AUDIO10_FU_CTRL_MID = 0x04, - AUDIO10_FU_CTRL_TREBLE = 0x05, - AUDIO10_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, - AUDIO10_FU_CTRL_AGC = 0x07, - AUDIO10_FU_CTRL_DELAY = 0x08, - AUDIO10_FU_CTRL_BASS_BOOST = 0x09, - AUDIO10_FU_CTRL_LOUDNESS = 0x0A, +/// A.10.2 - Feature Unit Control Selectors UAC1 +typedef enum { + AUDIO10_FU_CTRL_UNDEF = 0x00, + AUDIO10_FU_CTRL_MUTE = 0x01, + AUDIO10_FU_CTRL_VOLUME = 0x02, + AUDIO10_FU_CTRL_BASS = 0x03, + AUDIO10_FU_CTRL_MID = 0x04, + AUDIO10_FU_CTRL_TREBLE = 0x05, + AUDIO10_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, + AUDIO10_FU_CTRL_AGC = 0x07, + AUDIO10_FU_CTRL_DELAY = 0x08, + AUDIO10_FU_CTRL_BASS_BOOST = 0x09, + AUDIO10_FU_CTRL_LOUDNESS = 0x0A, } audio10_feature_unit_control_selector_t; -/// A.9.3 - Up/Down-mix Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_UD_CTRL_UNDEF = 0x00, - AUDIO10_UD_CTRL_ENABLE = 0x01, - AUDIO10_UD_CTRL_MODE_SELECT = 0x02, +/// A.10.3.1 - Up/Down-mix Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_UD_CTRL_UNDEF = 0x00, + AUDIO10_UD_CTRL_ENABLE = 0x01, + AUDIO10_UD_CTRL_MODE_SELECT = 0x02, } audio10_up_down_mix_control_selector_t; -/// A.9.4 - Dolby Prologic Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_DP_CTRL_UNDEF = 0x00, - AUDIO10_DP_CTRL_ENABLE = 0x01, - AUDIO10_DP_CTRL_MODE_SELECT = 0x02, +/// A.10.3.2 - Dolby Prologic Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_DP_CTRL_UNDEF = 0x00, + AUDIO10_DP_CTRL_ENABLE = 0x01, + AUDIO10_DP_CTRL_MODE_SELECT = 0x02, } audio10_dolby_prologic_control_selector_t; -/// A.9.5 - 3D Stereo Extender Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_3D_CTRL_UNDEF = 0x00, - AUDIO10_3D_CTRL_ENABLE = 0x01, - AUDIO10_3D_CTRL_SPACIOUSNESS = 0x02, +/// A.10.3.3 - 3D Stereo Extender Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_3D_CTRL_UNDEF = 0x00, + AUDIO10_3D_CTRL_ENABLE = 0x01, + AUDIO10_3D_CTRL_SPACIOUSNESS = 0x02, } audio10_3d_stereo_extender_control_selector_t; -/// A.9.6 - Reverberation Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_RV_CTRL_UNDEF = 0x00, - AUDIO10_RV_CTRL_ENABLE = 0x01, - AUDIO10_RV_CTRL_REVERB_LEVEL = 0x02, - AUDIO10_RV_CTRL_REVERB_TIME = 0x03, - AUDIO10_RV_CTRL_REVERB_FEEDBACK = 0x04, +/// A.10.3.4 - Reverberation Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_RV_CTRL_UNDEF = 0x00, + AUDIO10_RV_CTRL_ENABLE = 0x01, + AUDIO10_RV_CTRL_REVERB_LEVEL = 0x02, + AUDIO10_RV_CTRL_REVERB_TIME = 0x03, + AUDIO10_RV_CTRL_REVERB_FEEDBACK = 0x04, } audio10_reverberation_control_selector_t; -/// A.9.7 - Chorus Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_CH_CTRL_UNDEF = 0x00, - AUDIO10_CH_CTRL_ENABLE = 0x01, - AUDIO10_CH_CTRL_CHORUS_LEVEL = 0x02, - AUDIO10_CH_CTRL_CHORUS_RATE = 0x03, - AUDIO10_CH_CTRL_CHORUS_DEPTH = 0x04, +/// A.10.3.5 - Chorus Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_CH_CTRL_UNDEF = 0x00, + AUDIO10_CH_CTRL_ENABLE = 0x01, + AUDIO10_CH_CTRL_CHORUS_LEVEL = 0x02, + AUDIO10_CH_CTRL_CHORUS_RATE = 0x03, + AUDIO10_CH_CTRL_CHORUS_DEPTH = 0x04, } audio10_chorus_control_selector_t; -/// A.9.8 - Dynamic Range Compressor Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_DR_CTRL_UNDEF = 0x00, - AUDIO10_DR_CTRL_ENABLE = 0x01, - AUDIO10_DR_CTRL_COMPRESSION_RATE = 0x02, - AUDIO10_DR_CTRL_MAXAMPL = 0x03, - AUDIO10_DR_CTRL_THRESHOLD = 0x04, - AUDIO10_DR_CTRL_ATTACK_TIME = 0x05, - AUDIO10_DR_CTRL_RELEASE_TIME = 0x06, +/// A.10.3.6 - Dynamic Range Compressor Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_DR_CTRL_UNDEF = 0x00, + AUDIO10_DR_CTRL_ENABLE = 0x01, + AUDIO10_DR_CTRL_COMPRESSION_RATE = 0x02, + AUDIO10_DR_CTRL_MAXAMPL = 0x03, + AUDIO10_DR_CTRL_THRESHOLD = 0x04, + AUDIO10_DR_CTRL_ATTACK_TIME = 0x05, + AUDIO10_DR_CTRL_RELEASE_TIME = 0x06, } audio10_dynamic_range_compression_control_selector_t; -/// A.9.9 - Extension Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_XU_CTRL_UNDEF = 0x00, - AUDIO10_XU_CTRL_ENABLE = 0x01, +/// A.10.4 - Extension Unit Control Selectors UAC1 +typedef enum { + AUDIO10_XU_CTRL_UNDEF = 0x00, + AUDIO10_XU_CTRL_ENABLE = 0x01, } audio10_extension_unit_control_selector_t; -/// A.9.10 - Endpoint Control Selectors UAC1 -typedef enum -{ - AUDIO10_EP_CTRL_UNDEF = 0x00, - AUDIO10_EP_CTRL_SAMPLING_FREQ = 0x01, - AUDIO10_EP_CTRL_PITCH = 0x02, +/// A.10.5 - Endpoint Control Selectors UAC1 +typedef enum { + AUDIO10_EP_CTRL_UNDEF = 0x00, + AUDIO10_EP_CTRL_SAMPLING_FREQ = 0x01, + AUDIO10_EP_CTRL_PITCH = 0x02, } audio10_ep_control_selector_t; +/// Audio Class-Specific AS Isochronous Data EP Attributes UAC1 +typedef enum { + AUDIO10_CS_AS_ISO_DATA_EP_ATT_MAX_PACKETS_ONLY = 0x80, + AUDIO10_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK = 0x00, + AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ = 0x01, + AUDIO10_CS_AS_ISO_DATA_EP_ATT_PITCH = 0x02, +} audio10_cs_as_iso_data_ep_attribute_t; + +/// Audio Class-Specific AS Isochronous Data EP Lock Delay Units UAC1 +typedef enum { + AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED = 0x00, + AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC = 0x01, + AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_PCM_SAMPLES = 0x02, +} audio10_cs_as_iso_data_ep_lock_delay_unit_t; + +/// Audio Class-Feature Unit Controls UAC1 +typedef enum { + AUDIO10_FU_CONTROL_BM_MUTE = 1 << 0, + AUDIO10_FU_CONTROL_BM_VOLUME = 1 << 1, + AUDIO10_FU_CONTROL_BM_BASS = 1 << 2, + AUDIO10_FU_CONTROL_BM_MID = 1 << 3, + AUDIO10_FU_CONTROL_BM_TREBLE = 1 << 4, + AUDIO10_FU_CONTROL_BM_GRAPHIC_EQUALIZER = 1 << 5, + AUDIO10_FU_CONTROL_BM_AGC = 1 << 6, + AUDIO10_FU_CONTROL_BM_DELAY = 1 << 7, + AUDIO10_FU_CONTROL_BM_BASS_BOOST = 1 << 8, + AUDIO10_FU_CONTROL_BM_LOUDNESS = 1 << 9, +} audio10_feature_unit_control_bitmap_t; + /// A.1 - Audio Class-Format Type Codes UAC1 -typedef enum -{ - AUDIO10_FORMAT_TYPE_UNDEFINED = 0x00, - AUDIO10_FORMAT_TYPE_I = 0x01, - AUDIO10_FORMAT_TYPE_II = 0x02, - AUDIO10_FORMAT_TYPE_III = 0x03, +typedef enum { + AUDIO10_FORMAT_TYPE_UNDEFINED = 0x00, + AUDIO10_FORMAT_TYPE_I = 0x01, + AUDIO10_FORMAT_TYPE_II = 0x02, + AUDIO10_FORMAT_TYPE_III = 0x03, } audio10_format_type_t; // A.1.1 - Audio Class-Audio Data Format Type I UAC1 -typedef enum -{ - AUDIO10_DATA_FORMAT_TYPE_I_PCM = 0x0001, - AUDIO10_DATA_FORMAT_TYPE_I_PCM8 = 0x0002, - AUDIO10_DATA_FORMAT_TYPE_I_IEEE_FLOAT = 0x0003, - AUDIO10_DATA_FORMAT_TYPE_I_ALAW = 0x0004, - AUDIO10_DATA_FORMAT_TYPE_I_MULAW = 0x0005, +typedef enum { + AUDIO10_DATA_FORMAT_TYPE_I_PCM = 0x0001, + AUDIO10_DATA_FORMAT_TYPE_I_PCM8 = 0x0002, + AUDIO10_DATA_FORMAT_TYPE_I_IEEE_FLOAT = 0x0003, + AUDIO10_DATA_FORMAT_TYPE_I_ALAW = 0x0004, + AUDIO10_DATA_FORMAT_TYPE_I_MULAW = 0x0005, } audio10_data_format_type_I_t; // A.1.2 - Audio Class-Audio Data Format Type II UAC1 -typedef enum -{ - AUDIO10_DATA_FORMAT_TYPE_II_MPEG = 0x1001, - AUDIO10_DATA_FORMAT_TYPE_II_AC3 = 0x1002, +typedef enum { + AUDIO10_DATA_FORMAT_TYPE_II_MPEG = 0x1001, + AUDIO10_DATA_FORMAT_TYPE_II_AC3 = 0x1002, } audio10_data_format_type_II_t; // A.1.3 - Audio Class-Audio Data Format Type III UAC1 -typedef enum -{ - AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_AC3_1 = 0x2001, - AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L1_1 = 0x2002, - AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L23_1 = 0x2003, - AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_EXT_1 = 0x2004, +typedef enum { + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_AC3_1 = 0x2001, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L1_1 = 0x2002, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L23_1 = 0x2003, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_EXT_1 = 0x2004, AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_L1_LS_1 = 0x2005, AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_L23_LS_1 = 0x2006, } audio10_data_format_type_III_t; /// Audio Class-Audio Channel Configuration UAC1 (Table A-7) -typedef enum -{ - AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED = 0x0000, - AUDIO10_CHANNEL_CONFIG_LEFT_FRONT = 0x0001, - AUDIO10_CHANNEL_CONFIG_RIGHT_FRONT = 0x0002, - AUDIO10_CHANNEL_CONFIG_CENTER_FRONT = 0x0004, - AUDIO10_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x0008, - AUDIO10_CHANNEL_CONFIG_LEFT_SURROUND = 0x0010, - AUDIO10_CHANNEL_CONFIG_RIGHT_SURROUND = 0x0020, - AUDIO10_CHANNEL_CONFIG_LEFT_OF_CENTER = 0x0040, - AUDIO10_CHANNEL_CONFIG_RIGHT_OF_CENTER = 0x0080, - AUDIO10_CHANNEL_CONFIG_SURROUND = 0x0100, - AUDIO10_CHANNEL_CONFIG_SIDE_LEFT = 0x0200, - AUDIO10_CHANNEL_CONFIG_SIDE_RIGHT = 0x0400, - AUDIO10_CHANNEL_CONFIG_TOP = 0x0800, +typedef enum { + AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED = 0x0000, + AUDIO10_CHANNEL_CONFIG_LEFT_FRONT = 0x0001, + AUDIO10_CHANNEL_CONFIG_RIGHT_FRONT = 0x0002, + AUDIO10_CHANNEL_CONFIG_CENTER_FRONT = 0x0004, + AUDIO10_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x0008, + AUDIO10_CHANNEL_CONFIG_LEFT_SURROUND = 0x0010, + AUDIO10_CHANNEL_CONFIG_RIGHT_SURROUND = 0x0020, + AUDIO10_CHANNEL_CONFIG_LEFT_OF_CENTER = 0x0040, + AUDIO10_CHANNEL_CONFIG_RIGHT_OF_CENTER = 0x0080, + AUDIO10_CHANNEL_CONFIG_SURROUND = 0x0100, + AUDIO10_CHANNEL_CONFIG_SIDE_LEFT = 0x0200, + AUDIO10_CHANNEL_CONFIG_SIDE_RIGHT = 0x0400, + AUDIO10_CHANNEL_CONFIG_TOP = 0x0800, } audio10_channel_config_t; -//--------------------------------------------------------------------+ -// USB AUDIO CLASS 1.0 (UAC1) DESCRIPTORS -//--------------------------------------------------------------------+ + //--------------------------------------------------------------------+ + // USB AUDIO CLASS 1.0 (UAC1) DESCRIPTORS + //--------------------------------------------------------------------+ -/// AUDIO Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) -#define audio10_desc_cs_ac_interface_n_t(numInterfaces) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 8+n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_HEADER. */\ - uint16_t bcdADC ; /* Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: 0x0100 for UAC1. */\ - uint16_t wTotalLength ; /* Total number of bytes returned for the class-specific AudioControl interface descriptor. */\ - uint8_t bInCollection ; /* The number of AudioStreaming and MIDIStreaming interfaces in the Audio Interface Collection. */\ - uint8_t baInterfaceNr[numInterfaces]; /* Interface number of the AudioStreaming or MIDIStreaming interface in the Collection. */\ -} + /// AUDIO Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) + #define audio10_desc_cs_ac_interface_n_t(numInterfaces) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 8+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_HEADER. */ \ + uint16_t bcdADC; /* Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: 0x0100 for UAC1. */ \ + uint16_t wTotalLength; /* Total number of bytes returned for the class-specific AudioControl interface descriptor. */ \ + uint8_t bInCollection; /* The number of AudioStreaming and MIDIStreaming interfaces in the Audio Interface Collection. */ \ + uint8_t baInterfaceNr[numInterfaces]; /* Interface number of the AudioStreaming or MIDIStreaming interface in the Collection. */ \ + } /// AUDIO Input Terminal Descriptor UAC1 (4.3.2.1) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 12. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL. - uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. - uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. - uint8_t bAssocTerminal ; ///< ID of the Output Terminal to which this Input Terminal is associated. - uint8_t bNrChannels ; ///< Number of logical output channels in the Terminal's output audio channel cluster. - uint16_t wChannelConfig ; ///< Describes the spatial location of the logical channels. - uint8_t iChannelNames ; ///< Index of a string descriptor, describing the name of the first logical channel. - uint8_t iTerminal ; ///< Index of a string descriptor, describing the Input Terminal. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 12. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL. + uint8_t bTerminalID; ///< Constant uniquely identifying the Terminal within the audio function. + uint16_t wTerminalType; ///< Constant characterizing the type of Terminal. + uint8_t bAssocTerminal; ///< ID of the Output Terminal to which this Input Terminal is associated. + uint8_t bNrChannels; ///< Number of logical output channels in the Terminal's output audio channel cluster. + uint16_t wChannelConfig; ///< Describes the spatial location of the logical channels. + uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first logical channel. + uint8_t iTerminal; ///< Index of a string descriptor, describing the Input Terminal. } audio10_desc_input_terminal_t; /// AUDIO Output Terminal Descriptor UAC1 (4.3.2.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 9. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL. - uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. - uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. - uint8_t bAssocTerminal ; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. - uint8_t bSourceID ; ///< ID of the Unit or Terminal to which this Terminal is connected. - uint8_t iTerminal ; ///< Index of a string descriptor, describing the Output Terminal. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 9. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL. + uint8_t bTerminalID; ///< Constant uniquely identifying the Terminal within the audio function. + uint16_t wTerminalType; ///< Constant characterizing the type of Terminal. + uint8_t bAssocTerminal; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. + uint8_t bSourceID; ///< ID of the Unit or Terminal to which this Terminal is connected. + uint8_t iTerminal; ///< Index of a string descriptor, describing the Output Terminal. } audio10_desc_output_terminal_t; /// AUDIO Mixer Unit Descriptor UAC1 (4.3.2.3) -#define audio10_desc_mixer_unit_n_t(numInputPins, numControlBytes) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 10+p+n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_MIXER_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ - uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Mixer Unit are connected. */\ - uint8_t bNrChannels ; /* Number of logical output channels in the Mixer Unit's output audio channel cluster. */\ - uint16_t wChannelConfig ; /* Describes the spatial location of the logical channels. */\ - uint8_t iChannelNames ; /* Index of a string descriptor, describing the name of the first logical channel. */\ - uint8_t bmControls[numControlBytes]; /* Mixer Unit Controls bitmap. */\ - uint8_t iMixer ; /* Index of a string descriptor, describing the Mixer Unit. */\ -} +#define audio10_desc_mixer_unit_n_t(numInputPins, numControlBytes) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 10+p+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_MIXER_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint8_t bNrInPins; /* Number of Input Pins of this Unit: p. */ \ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Mixer Unit are connected. */ \ + uint8_t bNrChannels; /* Number of logical output channels in the Mixer Unit's output audio channel cluster. */ \ + uint16_t wChannelConfig; /* Describes the spatial location of the logical channels. */ \ + uint8_t iChannelNames; /* Index of a string descriptor, describing the name of the first logical channel. */ \ + uint8_t bmControls[numControlBytes]; /* Mixer Unit Controls bitmap. */ \ + uint8_t iMixer; /* Index of a string descriptor, describing the Mixer Unit. */ \ + } /// AUDIO Selector Unit Descriptor UAC1 (4.3.2.4) -#define audio10_desc_selector_unit_n_t(numInputPins) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 6+p. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ - uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Selector Unit are connected. */\ - uint8_t iSelector ; /* Index of a string descriptor, describing the Selector Unit. */\ -} +#define audio10_desc_selector_unit_n_t(numInputPins) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 6+p. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint8_t bNrInPins; /* Number of Input Pins of this Unit: p. */ \ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Selector Unit are connected. */ \ + uint8_t iSelector; /* Index of a string descriptor, describing the Selector Unit. */ \ + } /// AUDIO Feature Unit Descriptor UAC1 (4.3.2.5) -#define audio10_desc_feature_unit_n_t(numChannels, controlSize) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 7+(ch+1)*n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint8_t bSourceID ; /* ID of the Unit or Terminal to which this Feature Unit is connected. */\ - uint8_t bControlSize ; /* Size in bytes of an element of the bmaControls() array. */\ - uint8_t bmaControls[(numChannels+1)*controlSize]; /* Control bitmaps for master + logical channels. */\ - uint8_t iFeature ; /* Index of a string descriptor, describing this Feature Unit. */\ -} +#define audio10_desc_feature_unit_n_t(numChannels, controlSize) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 7+(ch+1)*n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint8_t bSourceID; /* ID of the Unit or Terminal to which this Feature Unit is connected. */ \ + uint8_t bControlSize; /* Size in bytes of an element of the bmaControls() array. */ \ + uint8_t bmaControls[(numChannels + 1) * controlSize]; /* Control bitmaps for master + logical channels. */ \ + uint8_t iFeature; /* Index of a string descriptor, describing this Feature Unit. */ \ + } /// AUDIO Processing Unit Descriptor UAC1 (4.3.2.6) -#define audio10_desc_processing_unit_n_t(numInputPins, numControlBytes) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 13+p+n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint16_t wProcessType ; /* Constant identifying the type of processing this Unit is performing. */\ - uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ - uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Processing Unit are connected. */\ - uint8_t bNrChannels ; /* Number of logical output channels in the Processing Unit's output audio channel cluster. */\ - uint16_t wChannelConfig ; /* Describes the spatial location of the logical channels. */\ - uint8_t iChannelNames ; /* Index of a string descriptor, describing the name of the first logical channel. */\ - uint8_t bControlSize ; /* Size in bytes of the bmControls field. */\ - uint8_t bmControls[numControlBytes]; /* Processing Unit Controls bitmap. */\ - uint8_t iProcessing ; /* Index of a string descriptor, describing the Processing Unit. */\ -} +#define audio10_desc_processing_unit_n_t(numInputPins, numControlBytes) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 13+p+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint16_t wProcessType; /* Constant identifying the type of processing this Unit is performing. */ \ + uint8_t bNrInPins; /* Number of Input Pins of this Unit: p. */ \ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Processing Unit are connected. */ \ + uint8_t bNrChannels; /* Number of logical output channels in the Processing Unit's output audio channel cluster. */ \ + uint16_t wChannelConfig; /* Describes the spatial location of the logical channels. */ \ + uint8_t iChannelNames; /* Index of a string descriptor, describing the name of the first logical channel. */ \ + uint8_t bControlSize; /* Size in bytes of the bmControls field. */ \ + uint8_t bmControls[numControlBytes]; /* Processing Unit Controls bitmap. */ \ + uint8_t iProcessing; /* Index of a string descriptor, describing the Processing Unit. */ \ + } /// AUDIO Extension Unit Descriptor UAC1 (4.3.2.7) -#define audio10_desc_extension_unit_n_t(numInputPins, numControlBytes) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 13+p+n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint16_t wExtensionCode ; /* Vendor-specific code identifying the Extension Unit. */\ - uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ - uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Extension Unit are connected. */\ - uint8_t bNrChannels ; /* Number of logical output channels in the Extension Unit's output audio channel cluster. */\ - uint16_t wChannelConfig ; /* Describes the spatial location of the logical channels. */\ - uint8_t iChannelNames ; /* Index of a string descriptor, describing the name of the first logical channel. */\ - uint8_t bControlSize ; /* Size in bytes of the bmControls field. */\ - uint8_t bmControls[numControlBytes]; /* Extension Unit Controls bitmap. */\ - uint8_t iExtension ; /* Index of a string descriptor, describing the Extension Unit. */\ -} +#define audio10_desc_extension_unit_n_t(numInputPins, numControlBytes) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 13+p+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint16_t wExtensionCode; /* Vendor-specific code identifying the Extension Unit. */ \ + uint8_t bNrInPins; /* Number of Input Pins of this Unit: p. */ \ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Extension Unit are connected. */ \ + uint8_t bNrChannels; /* Number of logical output channels in the Extension Unit's output audio channel cluster. */ \ + uint16_t wChannelConfig; /* Describes the spatial location of the logical channels. */ \ + uint8_t iChannelNames; /* Index of a string descriptor, describing the name of the first logical channel. */ \ + uint8_t bControlSize; /* Size in bytes of the bmControls field. */ \ + uint8_t bmControls[numControlBytes]; /* Extension Unit Controls bitmap. */ \ + uint8_t iExtension; /* Index of a string descriptor, describing the Extension Unit. */ \ + } /// AUDIO Class-Specific AS Interface Descriptor UAC1 (4.5.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 7. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_AS_GENERAL. - uint8_t bTerminalLink ; ///< The Terminal ID of the Terminal to which the endpoint of this interface is connected. - uint8_t bDelay ; ///< Expressed in number of frames. - uint16_t wFormatTag ; ///< The Audio Data Format that has to be used to communicate with this interface. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 7. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_AS_GENERAL. + uint8_t bTerminalLink; ///< The Terminal ID of the Terminal to which the endpoint of this interface is connected. + uint8_t bDelay; ///< Expressed in number of frames. + uint16_t wFormatTag; ///< The Audio Data Format that has to be used to communicate with this interface. } audio10_desc_cs_as_interface_t; /// AUDIO Type I Format Type Descriptor UAC1 (2.2.5) -#define audio10_desc_type_I_format_n_t(numSamFreq) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 8+(ns*3). */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */\ - uint8_t bFormatType ; /* Constant identifying the Format Type the AudioStreaming interface is using. */\ - uint8_t bNrChannels ; /* Indicates the number of physical channels in the audio data stream. */\ - uint8_t bSubFrameSize ; /* The number of bytes occupied by one audio subframe. */\ - uint8_t bBitResolution ; /* The number of effectively used bits from the available bits in an audio subframe. */\ - uint8_t bSamFreqType ; /* Indicates how the sampling frequency can be programmed. */\ - uint8_t tSamFreq[numSamFreq*3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */\ -} +#define audio10_desc_type_I_format_n_t(numSamFreq) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 8+(ns*3). */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */ \ + uint8_t bFormatType; /* Constant identifying the Format Type the AudioStreaming interface is using. */ \ + uint8_t bNrChannels; /* Indicates the number of physical channels in the audio data stream. */ \ + uint8_t bSubFrameSize; /* The number of bytes occupied by one audio subframe. */ \ + uint8_t bBitResolution; /* The number of effectively used bits from the available bits in an audio subframe. */ \ + uint8_t bSamFreqType; /* Indicates how the sampling frequency can be programmed. */ \ + uint8_t tSamFreq[numSamFreq * 3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */ \ + } /// AUDIO Type II Format Type Descriptor UAC1 (2.3.5) -#define audio10_desc_type_II_format_n_t(numSamFreq) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 9+(ns*3). */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */\ - uint8_t bFormatType ; /* Constant identifying the Format Type the AudioStreaming interface is using. */\ - uint16_t wMaxBitRate ; /* Indicates the maximum number of bits per second this interface can handle. */\ - uint16_t wSamplesPerFrame ; /* Indicates the number of PCM audio samples contained in one encoded audio frame. */\ - uint8_t bSamFreqType ; /* Indicates how the sampling frequency can be programmed. */\ - uint8_t tSamFreq[numSamFreq*3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */\ -} +#define audio10_desc_type_II_format_n_t(numSamFreq) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 9+(ns*3). */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */ \ + uint8_t bFormatType; /* Constant identifying the Format Type the AudioStreaming interface is using. */ \ + uint16_t wMaxBitRate; /* Indicates the maximum number of bits per second this interface can handle. */ \ + uint16_t wSamplesPerFrame; /* Indicates the number of PCM audio samples contained in one encoded audio frame. */ \ + uint8_t bSamFreqType; /* Indicates how the sampling frequency can be programmed. */ \ + uint8_t tSamFreq[numSamFreq * 3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */ \ + } /// AUDIO Type III Format Type Descriptor UAC1 (2.4.5) -#define audio10_desc_type_III_format_n_t(numSamFreq) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 8+(ns*3). */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */\ - uint8_t bFormatType ; /* Constant identifying the Format Type the AudioStreaming interface is using. */\ - uint8_t bNrChannels ; /* Indicates the number of physical channels in the audio data stream. */\ - uint8_t bSubFrameSize ; /* The number of bytes occupied by one audio subframe. */\ - uint8_t bBitResolution ; /* The number of effectively used bits from the available bits in an audio subframe. */\ - uint8_t bSamFreqType ; /* Indicates how the sampling frequency can be programmed. */\ - uint8_t tSamFreq[numSamFreq*3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */\ -} +#define audio10_desc_type_III_format_n_t(numSamFreq) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 8+(ns*3). */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */ \ + uint8_t bFormatType; /* Constant identifying the Format Type the AudioStreaming interface is using. */ \ + uint8_t bNrChannels; /* Indicates the number of physical channels in the audio data stream. */ \ + uint8_t bSubFrameSize; /* The number of bytes occupied by one audio subframe. */ \ + uint8_t bBitResolution; /* The number of effectively used bits from the available bits in an audio subframe. */ \ + uint8_t bSamFreqType; /* Indicates how the sampling frequency can be programmed. */ \ + uint8_t tSamFreq[numSamFreq * 3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */ \ + } + +/// Standard AS Isochronous Audio Data Endpoint Descriptor UAC1 (4.6.1.1) +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 9. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_ENDPOINT. + uint8_t bEndpointAddress;///< The address of the endpoint on the USB device described by this descriptor. + uint8_t bmAttributes; ///< Endpoint attributes when configured using the bEndpointAddress field. + uint16_t wMaxPacketSize; ///< Maximum packet size this endpoint is capable of sending or receiving when this configuration is selected. + uint8_t bInterval; ///< Interval for polling endpoint for data transfers. + uint8_t bRefresh; ///< The rate at which the endpoint is refreshed. + uint8_t bSynchAddress; ///< The address of the endpoint used to send synchronization information for the data endpoint. +} audio10_desc_as_iso_data_ep_t; /// AUDIO Class-Specific AS Isochronous Audio Data Endpoint Descriptor UAC1 (4.6.1.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 7. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_EP_SUBTYPE_GENERAL. - uint8_t bmAttributes ; ///< Bit 0: Sampling Frequency, Bit 1: Pitch, Bit 7: MaxPacketsOnly. - uint8_t bLockDelayUnits ; ///< Indicates the units used for the wLockDelay field. - uint16_t wLockDelay ; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 7. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO10_CS_EP_SUBTYPE_GENERAL. + uint8_t bmAttributes; ///< Bit 0: Sampling Frequency, Bit 1: Pitch, Bit 7: MaxPacketsOnly. + uint8_t bLockDelayUnits; ///< Indicates the units used for the wLockDelay field. + uint16_t wLockDelay; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. } audio10_desc_cs_as_iso_data_ep_t; /// AUDIO Interrupt Data Message Format UAC1 (3.7.1.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bStatusType ; ///< Indicates the type of status information being reported. - uint8_t bOriginator ; ///< Indicates the entity that originated this status information. +typedef struct TU_ATTR_PACKED { + uint8_t bStatusType;///< Indicates the type of status information being reported. + uint8_t bOriginator;///< Indicates the entity that originated this status information. } audio10_interrupt_data_t; //--------------------------------------------------------------------+ @@ -470,576 +517,494 @@ typedef struct TU_ATTR_PACKED //--------------------------------------------------------------------+ /// A.7 - Audio Function Category Codes -typedef enum -{ - AUDIO20_FUNC_UNDEF = 0x00, - AUDIO20_FUNC_DESKTOP_SPEAKER = 0x01, - AUDIO20_FUNC_HOME_THEATER = 0x02, - AUDIO20_FUNC_MICROPHONE = 0x03, - AUDIO20_FUNC_HEADSET = 0x04, - AUDIO20_FUNC_TELEPHONE = 0x05, - AUDIO20_FUNC_CONVERTER = 0x06, - AUDIO20_FUNC_SOUND_RECODER = 0x07, - AUDIO20_FUNC_IO_BOX = 0x08, +typedef enum { + AUDIO20_FUNC_UNDEF = 0x00, + AUDIO20_FUNC_DESKTOP_SPEAKER = 0x01, + AUDIO20_FUNC_HOME_THEATER = 0x02, + AUDIO20_FUNC_MICROPHONE = 0x03, + AUDIO20_FUNC_HEADSET = 0x04, + AUDIO20_FUNC_TELEPHONE = 0x05, + AUDIO20_FUNC_CONVERTER = 0x06, + AUDIO20_FUNC_SOUND_RECODER = 0x07, + AUDIO20_FUNC_IO_BOX = 0x08, AUDIO20_FUNC_MUSICAL_INSTRUMENT = 0x09, - AUDIO20_FUNC_PRO_AUDIO = 0x0A, - AUDIO20_FUNC_AUDIO_VIDEO = 0x0B, - AUDIO20_FUNC_CONTROL_PANEL = 0x0C, - AUDIO20_FUNC_OTHER = 0xFF, + AUDIO20_FUNC_PRO_AUDIO = 0x0A, + AUDIO20_FUNC_AUDIO_VIDEO = 0x0B, + AUDIO20_FUNC_CONTROL_PANEL = 0x0C, + AUDIO20_FUNC_OTHER = 0xFF, } audio20_function_code_t; /// A.9 - Audio Class-Specific AC Interface Descriptor Subtypes UAC2 -typedef enum -{ - AUDIO20_CS_AC_INTERFACE_AC_DESCRIPTOR_UNDEF = 0x00, - AUDIO20_CS_AC_INTERFACE_HEADER = 0x01, - AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, - AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, - AUDIO20_CS_AC_INTERFACE_MIXER_UNIT = 0x04, - AUDIO20_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, - AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, - AUDIO20_CS_AC_INTERFACE_EFFECT_UNIT = 0x07, - AUDIO20_CS_AC_INTERFACE_PROCESSING_UNIT = 0x08, - AUDIO20_CS_AC_INTERFACE_EXTENSION_UNIT = 0x09, - AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE = 0x0A, - AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR = 0x0B, - AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER = 0x0C, +typedef enum { + AUDIO20_CS_AC_INTERFACE_AC_DESCRIPTOR_UNDEF = 0x00, + AUDIO20_CS_AC_INTERFACE_HEADER = 0x01, + AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, + AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, + AUDIO20_CS_AC_INTERFACE_MIXER_UNIT = 0x04, + AUDIO20_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, + AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, + AUDIO20_CS_AC_INTERFACE_EFFECT_UNIT = 0x07, + AUDIO20_CS_AC_INTERFACE_PROCESSING_UNIT = 0x08, + AUDIO20_CS_AC_INTERFACE_EXTENSION_UNIT = 0x09, + AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE = 0x0A, + AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR = 0x0B, + AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER = 0x0C, AUDIO20_CS_AC_INTERFACE_SAMPLE_RATE_CONVERTER = 0x0D, } audio20_cs_ac_interface_subtype_t; /// A.10 - Audio Class-Specific AS Interface Descriptor Subtypes UAC2 -typedef enum -{ - AUDIO20_CS_AS_INTERFACE_AS_DESCRIPTOR_UNDEF = 0x00, - AUDIO20_CS_AS_INTERFACE_AS_GENERAL = 0x01, - AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, - AUDIO20_CS_AS_INTERFACE_ENCODER = 0x03, - AUDIO20_CS_AS_INTERFACE_DECODER = 0x04, +typedef enum { + AUDIO20_CS_AS_INTERFACE_AS_DESCRIPTOR_UNDEF = 0x00, + AUDIO20_CS_AS_INTERFACE_AS_GENERAL = 0x01, + AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, + AUDIO20_CS_AS_INTERFACE_ENCODER = 0x03, + AUDIO20_CS_AS_INTERFACE_DECODER = 0x04, } audio20_cs_as_interface_subtype_t; /// A.11 - Effect Unit Effect Types -typedef enum -{ - AUDIO20_EFFECT_TYPE_UNDEF = 0x00, - AUDIO20_EFFECT_TYPE_PARAM_EQ_SECTION = 0x01, - AUDIO20_EFFECT_TYPE_REVERBERATION = 0x02, - AUDIO20_EFFECT_TYPE_MOD_DELAY = 0x03, - AUDIO20_EFFECT_TYPE_DYN_RANGE_COMP = 0x04, +typedef enum { + AUDIO20_EFFECT_TYPE_UNDEF = 0x00, + AUDIO20_EFFECT_TYPE_PARAM_EQ_SECTION = 0x01, + AUDIO20_EFFECT_TYPE_REVERBERATION = 0x02, + AUDIO20_EFFECT_TYPE_MOD_DELAY = 0x03, + AUDIO20_EFFECT_TYPE_DYN_RANGE_COMP = 0x04, } audio20_effect_unit_effect_type_t; /// A.12 - Processing Unit Process Types -typedef enum -{ - AUDIO20_PROCESS_TYPE_UNDEF = 0x00, - AUDIO20_PROCESS_TYPE_UP_DOWN_MIX = 0x01, - AUDIO20_PROCESS_TYPE_DOLBY_PROLOGIC = 0x02, - AUDIO20_PROCESS_TYPE_STEREO_EXTENDER = 0x03, +typedef enum { + AUDIO20_PROCESS_TYPE_UNDEF = 0x00, + AUDIO20_PROCESS_TYPE_UP_DOWN_MIX = 0x01, + AUDIO20_PROCESS_TYPE_DOLBY_PROLOGIC = 0x02, + AUDIO20_PROCESS_TYPE_STEREO_EXTENDER = 0x03, } audio20_processing_unit_process_type_t; /// A.13 - Audio Class-Specific EP Descriptor Subtypes UAC2 -typedef enum -{ - AUDIO20_CS_EP_SUBTYPE_UNDEF = 0x00, - AUDIO20_CS_EP_SUBTYPE_GENERAL = 0x01, +typedef enum { + AUDIO20_CS_EP_SUBTYPE_UNDEF = 0x00, + AUDIO20_CS_EP_SUBTYPE_GENERAL = 0x01, } audio20_cs_ep_subtype_t; /// A.14 - Audio Class-Specific Request Codes UAC2 -typedef enum -{ - AUDIO20_CS_REQ_UNDEF = 0x00, - AUDIO20_CS_REQ_CUR = 0x01, - AUDIO20_CS_REQ_RANGE = 0x02, - AUDIO20_CS_REQ_MEM = 0x03, +typedef enum { + AUDIO20_CS_REQ_UNDEF = 0x00, + AUDIO20_CS_REQ_CUR = 0x01, + AUDIO20_CS_REQ_RANGE = 0x02, + AUDIO20_CS_REQ_MEM = 0x03, } audio20_cs_req_t; /// A.17 - Control Selector Codes UAC2 /// A.17.1 - Clock Source Control Selectors -typedef enum -{ - AUDIO20_CS_CTRL_UNDEF = 0x00, - AUDIO20_CS_CTRL_SAM_FREQ = 0x01, - AUDIO20_CS_CTRL_CLK_VALID = 0x02, +typedef enum { + AUDIO20_CS_CTRL_UNDEF = 0x00, + AUDIO20_CS_CTRL_SAM_FREQ = 0x01, + AUDIO20_CS_CTRL_CLK_VALID = 0x02, } audio20_clock_src_control_selector_t; /// A.17.2 - Clock Selector Control Selectors -typedef enum -{ - AUDIO20_CX_CTRL_UNDEF = 0x00, - AUDIO20_CX_CTRL_CONTROL = 0x01, +typedef enum { + AUDIO20_CX_CTRL_UNDEF = 0x00, + AUDIO20_CX_CTRL_CONTROL = 0x01, } audio20_clock_sel_control_selector_t; /// A.17.3 - Clock Multiplier Control Selectors -typedef enum -{ - AUDIO20_CM_CTRL_UNDEF = 0x00, - AUDIO20_CM_CTRL_NUMERATOR_CONTROL = 0x01, - AUDIO20_CM_CTRL_DENOMINATOR_CONTROL = 0x02, +typedef enum { + AUDIO20_CM_CTRL_UNDEF = 0x00, + AUDIO20_CM_CTRL_NUMERATOR_CONTROL = 0x01, + AUDIO20_CM_CTRL_DENOMINATOR_CONTROL = 0x02, } audio20_clock_mul_control_selector_t; /// A.17.4 - Terminal Control Selectors UAC2 -typedef enum -{ - AUDIO20_TE_CTRL_UNDEF = 0x00, - AUDIO20_TE_CTRL_COPY_PROTECT = 0x01, - AUDIO20_TE_CTRL_CONNECTOR = 0x02, - AUDIO20_TE_CTRL_OVERLOAD = 0x03, - AUDIO20_TE_CTRL_CLUSTER = 0x04, - AUDIO20_TE_CTRL_UNDERFLOW = 0x05, - AUDIO20_TE_CTRL_OVERFLOW = 0x06, - AUDIO20_TE_CTRL_LATENCY = 0x07, +typedef enum { + AUDIO20_TE_CTRL_UNDEF = 0x00, + AUDIO20_TE_CTRL_COPY_PROTECT = 0x01, + AUDIO20_TE_CTRL_CONNECTOR = 0x02, + AUDIO20_TE_CTRL_OVERLOAD = 0x03, + AUDIO20_TE_CTRL_CLUSTER = 0x04, + AUDIO20_TE_CTRL_UNDERFLOW = 0x05, + AUDIO20_TE_CTRL_OVERFLOW = 0x06, + AUDIO20_TE_CTRL_LATENCY = 0x07, } audio20_terminal_control_selector_t; /// A.17.5 - Mixer Control Selectors -typedef enum -{ - AUDIO20_MU_CTRL_UNDEF = 0x00, - AUDIO20_MU_CTRL_MIXER = 0x01, - AUDIO20_MU_CTRL_CLUSTER = 0x02, - AUDIO20_MU_CTRL_UNDERFLOW = 0x03, - AUDIO20_MU_CTRL_OVERFLOW = 0x04, - AUDIO20_MU_CTRL_LATENCY = 0x05, +typedef enum { + AUDIO20_MU_CTRL_UNDEF = 0x00, + AUDIO20_MU_CTRL_MIXER = 0x01, + AUDIO20_MU_CTRL_CLUSTER = 0x02, + AUDIO20_MU_CTRL_UNDERFLOW = 0x03, + AUDIO20_MU_CTRL_OVERFLOW = 0x04, + AUDIO20_MU_CTRL_LATENCY = 0x05, } audio20_mixer_control_selector_t; /// A.17.6 - Selector Control Selectors -typedef enum -{ - AUDIO20_SU_CTRL_UNDEF = 0x00, - AUDIO20_SU_CTRL_SELECTOR = 0x01, - AUDIO20_SU_CTRL_LATENCY = 0x02, +typedef enum { + AUDIO20_SU_CTRL_UNDEF = 0x00, + AUDIO20_SU_CTRL_SELECTOR = 0x01, + AUDIO20_SU_CTRL_LATENCY = 0x02, } audio20_sel_control_selector_t; /// A.17.7 - Feature Unit Control Selectors UAC2 -typedef enum -{ - AUDIO20_FU_CTRL_UNDEF = 0x00, - AUDIO20_FU_CTRL_MUTE = 0x01, - AUDIO20_FU_CTRL_VOLUME = 0x02, - AUDIO20_FU_CTRL_BASS = 0x03, - AUDIO20_FU_CTRL_MID = 0x04, - AUDIO20_FU_CTRL_TREBLE = 0x05, - AUDIO20_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, - AUDIO20_FU_CTRL_AGC = 0x07, - AUDIO20_FU_CTRL_DELAY = 0x08, - AUDIO20_FU_CTRL_BASS_BOOST = 0x09, - AUDIO20_FU_CTRL_LOUDNESS = 0x0A, - AUDIO20_FU_CTRL_INPUT_GAIN = 0x0B, - AUDIO20_FU_CTRL_GAIN_PAD = 0x0C, - AUDIO20_FU_CTRL_INVERTER = 0x0D, - AUDIO20_FU_CTRL_UNDERFLOW = 0x0E, - AUDIO20_FU_CTRL_OVERVLOW = 0x0F, - AUDIO20_FU_CTRL_LATENCY = 0x10, +typedef enum { + AUDIO20_FU_CTRL_UNDEF = 0x00, + AUDIO20_FU_CTRL_MUTE = 0x01, + AUDIO20_FU_CTRL_VOLUME = 0x02, + AUDIO20_FU_CTRL_BASS = 0x03, + AUDIO20_FU_CTRL_MID = 0x04, + AUDIO20_FU_CTRL_TREBLE = 0x05, + AUDIO20_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, + AUDIO20_FU_CTRL_AGC = 0x07, + AUDIO20_FU_CTRL_DELAY = 0x08, + AUDIO20_FU_CTRL_BASS_BOOST = 0x09, + AUDIO20_FU_CTRL_LOUDNESS = 0x0A, + AUDIO20_FU_CTRL_INPUT_GAIN = 0x0B, + AUDIO20_FU_CTRL_GAIN_PAD = 0x0C, + AUDIO20_FU_CTRL_INVERTER = 0x0D, + AUDIO20_FU_CTRL_UNDERFLOW = 0x0E, + AUDIO20_FU_CTRL_OVERVLOW = 0x0F, + AUDIO20_FU_CTRL_LATENCY = 0x10, } audio20_feature_unit_control_selector_t; /// A.17.8 Effect Unit Control Selectors /// A.17.8.1 Parametric Equalizer Section Effect Unit Control Selectors -typedef enum -{ - AUDIO20_PE_CTRL_UNDEF = 0x00, - AUDIO20_PE_CTRL_ENABLE = 0x01, - AUDIO20_PE_CTRL_CENTERFREQ = 0x02, - AUDIO20_PE_CTRL_QFACTOR = 0x03, - AUDIO20_PE_CTRL_GAIN = 0x04, - AUDIO20_PE_CTRL_UNDERFLOW = 0x05, - AUDIO20_PE_CTRL_OVERFLOW = 0x06, - AUDIO20_PE_CTRL_LATENCY = 0x07, +typedef enum { + AUDIO20_PE_CTRL_UNDEF = 0x00, + AUDIO20_PE_CTRL_ENABLE = 0x01, + AUDIO20_PE_CTRL_CENTERFREQ = 0x02, + AUDIO20_PE_CTRL_QFACTOR = 0x03, + AUDIO20_PE_CTRL_GAIN = 0x04, + AUDIO20_PE_CTRL_UNDERFLOW = 0x05, + AUDIO20_PE_CTRL_OVERFLOW = 0x06, + AUDIO20_PE_CTRL_LATENCY = 0x07, } audio20_parametric_equalizer_control_selector_t; /// A.17.8.2 Reverberation Effect Unit Control Selectors -typedef enum -{ - AUDIO20_RV_CTRL_UNDEF = 0x00, - AUDIO20_RV_CTRL_ENABLE = 0x01, - AUDIO20_RV_CTRL_TYPE = 0x02, - AUDIO20_RV_CTRL_LEVEL = 0x03, - AUDIO20_RV_CTRL_TIME = 0x04, - AUDIO20_RV_CTRL_FEEDBACK = 0x05, - AUDIO20_RV_CTRL_PREDELAY = 0x06, - AUDIO20_RV_CTRL_DENSITY = 0x07, - AUDIO20_RV_CTRL_HIFREQ_ROLLOFF = 0x08, - AUDIO20_RV_CTRL_UNDERFLOW = 0x09, - AUDIO20_RV_CTRL_OVERFLOW = 0x0A, - AUDIO20_RV_CTRL_LATENCY = 0x0B, +typedef enum { + AUDIO20_RV_CTRL_UNDEF = 0x00, + AUDIO20_RV_CTRL_ENABLE = 0x01, + AUDIO20_RV_CTRL_TYPE = 0x02, + AUDIO20_RV_CTRL_LEVEL = 0x03, + AUDIO20_RV_CTRL_TIME = 0x04, + AUDIO20_RV_CTRL_FEEDBACK = 0x05, + AUDIO20_RV_CTRL_PREDELAY = 0x06, + AUDIO20_RV_CTRL_DENSITY = 0x07, + AUDIO20_RV_CTRL_HIFREQ_ROLLOFF = 0x08, + AUDIO20_RV_CTRL_UNDERFLOW = 0x09, + AUDIO20_RV_CTRL_OVERFLOW = 0x0A, + AUDIO20_RV_CTRL_LATENCY = 0x0B, } audio20_reverberation_effect_control_selector_t; /// A.17.8.3 Modulation Delay Effect Unit Control Selectors -typedef enum -{ - AUDIO20_MD_CTRL_UNDEF = 0x00, - AUDIO20_MD_CTRL_ENABLE = 0x01, - AUDIO20_MD_CTRL_BALANCE = 0x02, - AUDIO20_MD_CTRL_RATE = 0x03, - AUDIO20_MD_CTRL_DEPTH = 0x04, - AUDIO20_MD_CTRL_TIME = 0x05, - AUDIO20_MD_CTRL_FEEDBACK = 0x06, - AUDIO20_MD_CTRL_UNDERFLOW = 0x07, - AUDIO20_MD_CTRL_OVERFLOW = 0x08, - AUDIO20_MD_CTRL_LATENCY = 0x09, +typedef enum { + AUDIO20_MD_CTRL_UNDEF = 0x00, + AUDIO20_MD_CTRL_ENABLE = 0x01, + AUDIO20_MD_CTRL_BALANCE = 0x02, + AUDIO20_MD_CTRL_RATE = 0x03, + AUDIO20_MD_CTRL_DEPTH = 0x04, + AUDIO20_MD_CTRL_TIME = 0x05, + AUDIO20_MD_CTRL_FEEDBACK = 0x06, + AUDIO20_MD_CTRL_UNDERFLOW = 0x07, + AUDIO20_MD_CTRL_OVERFLOW = 0x08, + AUDIO20_MD_CTRL_LATENCY = 0x09, } audio20_modulation_delay_control_selector_t; /// A.17.8.4 Dynamic Range Compressor Effect Unit Control Selectors -typedef enum -{ - AUDIO20_DR_CTRL_UNDEF = 0x00, - AUDIO20_DR_CTRL_ENABLE = 0x01, - AUDIO20_DR_CTRL_COMPRESSION_RATE = 0x02, - AUDIO20_DR_CTRL_MAXAMPL = 0x03, - AUDIO20_DR_CTRL_THRESHOLD = 0x04, - AUDIO20_DR_CTRL_ATTACK_TIME = 0x05, - AUDIO20_DR_CTRL_RELEASE_TIME = 0x06, - AUDIO20_DR_CTRL_UNDERFLOW = 0x07, - AUDIO20_DR_CTRL_OVERFLOW = 0x08, - AUDIO20_DR_CTRL_LATENCY = 0x09, +typedef enum { + AUDIO20_DR_CTRL_UNDEF = 0x00, + AUDIO20_DR_CTRL_ENABLE = 0x01, + AUDIO20_DR_CTRL_COMPRESSION_RATE = 0x02, + AUDIO20_DR_CTRL_MAXAMPL = 0x03, + AUDIO20_DR_CTRL_THRESHOLD = 0x04, + AUDIO20_DR_CTRL_ATTACK_TIME = 0x05, + AUDIO20_DR_CTRL_RELEASE_TIME = 0x06, + AUDIO20_DR_CTRL_UNDERFLOW = 0x07, + AUDIO20_DR_CTRL_OVERFLOW = 0x08, + AUDIO20_DR_CTRL_LATENCY = 0x09, } audio20_dynamic_range_compression_control_selector_t; /// A.17.9 Processing Unit Control Selectors /// A.17.9.1 Up/Down-mix Processing Unit Control Selectors -typedef enum -{ - AUDIO20_UD_CTRL_UNDEF = 0x00, - AUDIO20_UD_CTRL_ENABLE = 0x01, - AUDIO20_UD_CTRL_MODE_SELECT = 0x02, - AUDIO20_UD_CTRL_CLUSTER = 0x03, - AUDIO20_UD_CTRL_UNDERFLOW = 0x04, - AUDIO20_UD_CTRL_OVERFLOW = 0x05, - AUDIO20_UD_CTRL_LATENCY = 0x06, +typedef enum { + AUDIO20_UD_CTRL_UNDEF = 0x00, + AUDIO20_UD_CTRL_ENABLE = 0x01, + AUDIO20_UD_CTRL_MODE_SELECT = 0x02, + AUDIO20_UD_CTRL_CLUSTER = 0x03, + AUDIO20_UD_CTRL_UNDERFLOW = 0x04, + AUDIO20_UD_CTRL_OVERFLOW = 0x05, + AUDIO20_UD_CTRL_LATENCY = 0x06, } audio20_up_down_mix_control_selector_t; /// A.17.9.2 Dolby Prologic ™ Processing Unit Control Selectors -typedef enum -{ - AUDIO20_DP_CTRL_UNDEF = 0x00, - AUDIO20_DP_CTRL_ENABLE = 0x01, - AUDIO20_DP_CTRL_MODE_SELECT = 0x02, - AUDIO20_DP_CTRL_CLUSTER = 0x03, - AUDIO20_DP_CTRL_UNDERFLOW = 0x04, - AUDIO20_DP_CTRL_OVERFLOW = 0x05, - AUDIO20_DP_CTRL_LATENCY = 0x06, +typedef enum { + AUDIO20_DP_CTRL_UNDEF = 0x00, + AUDIO20_DP_CTRL_ENABLE = 0x01, + AUDIO20_DP_CTRL_MODE_SELECT = 0x02, + AUDIO20_DP_CTRL_CLUSTER = 0x03, + AUDIO20_DP_CTRL_UNDERFLOW = 0x04, + AUDIO20_DP_CTRL_OVERFLOW = 0x05, + AUDIO20_DP_CTRL_LATENCY = 0x06, } audio20_dolby_prologic_control_selector_t; /// A.17.9.3 Stereo Extender Processing Unit Control Selectors -typedef enum -{ - AUDIO20_ST_EXT_CTRL_UNDEF = 0x00, - AUDIO20_ST_EXT_CTRL_ENABLE = 0x01, - AUDIO20_ST_EXT_CTRL_WIDTH = 0x02, - AUDIO20_ST_EXT_CTRL_UNDERFLOW = 0x03, - AUDIO20_ST_EXT_CTRL_OVERFLOW = 0x04, - AUDIO20_ST_EXT_CTRL_LATENCY = 0x05, +typedef enum { + AUDIO20_ST_EXT_CTRL_UNDEF = 0x00, + AUDIO20_ST_EXT_CTRL_ENABLE = 0x01, + AUDIO20_ST_EXT_CTRL_WIDTH = 0x02, + AUDIO20_ST_EXT_CTRL_UNDERFLOW = 0x03, + AUDIO20_ST_EXT_CTRL_OVERFLOW = 0x04, + AUDIO20_ST_EXT_CTRL_LATENCY = 0x05, } audio20_stereo_extender_control_selector_t; /// A.17.10 Extension Unit Control Selectors -typedef enum -{ - AUDIO20_XU_CTRL_UNDEF = 0x00, - AUDIO20_XU_CTRL_ENABLE = 0x01, - AUDIO20_XU_CTRL_CLUSTER = 0x02, - AUDIO20_XU_CTRL_UNDERFLOW = 0x03, - AUDIO20_XU_CTRL_OVERFLOW = 0x04, - AUDIO20_XU_CTRL_LATENCY = 0x05, +typedef enum { + AUDIO20_XU_CTRL_UNDEF = 0x00, + AUDIO20_XU_CTRL_ENABLE = 0x01, + AUDIO20_XU_CTRL_CLUSTER = 0x02, + AUDIO20_XU_CTRL_UNDERFLOW = 0x03, + AUDIO20_XU_CTRL_OVERFLOW = 0x04, + AUDIO20_XU_CTRL_LATENCY = 0x05, } audio20_extension_unit_control_selector_t; /// A.17.11 AudioStreaming Interface Control Selectors -typedef enum -{ - AUDIO20_AS_CTRL_UNDEF = 0x00, - AUDIO20_AS_CTRL_ACT_ALT_SETTING = 0x01, - AUDIO20_AS_CTRL_VAL_ALT_SETTINGS = 0x02, - AUDIO20_AS_CTRL_AUDIO_DATA_FORMAT = 0x03, +typedef enum { + AUDIO20_AS_CTRL_UNDEF = 0x00, + AUDIO20_AS_CTRL_ACT_ALT_SETTING = 0x01, + AUDIO20_AS_CTRL_VAL_ALT_SETTINGS = 0x02, + AUDIO20_AS_CTRL_AUDIO_DATA_FORMAT = 0x03, } audio20_audiostreaming_interface_control_selector_t; /// A.17.12 Encoder Control Selectors -typedef enum -{ - AUDIO20_EN_CTRL_UNDEF = 0x00, - AUDIO20_EN_CTRL_BIT_RATE = 0x01, - AUDIO20_EN_CTRL_QUALITY = 0x02, - AUDIO20_EN_CTRL_VBR = 0x03, - AUDIO20_EN_CTRL_TYPE = 0x04, - AUDIO20_EN_CTRL_UNDERFLOW = 0x05, - AUDIO20_EN_CTRL_OVERFLOW = 0x06, - AUDIO20_EN_CTRL_ENCODER_ERROR = 0x07, - AUDIO20_EN_CTRL_PARAM1 = 0x08, - AUDIO20_EN_CTRL_PARAM2 = 0x09, - AUDIO20_EN_CTRL_PARAM3 = 0x0A, - AUDIO20_EN_CTRL_PARAM4 = 0x0B, - AUDIO20_EN_CTRL_PARAM5 = 0x0C, - AUDIO20_EN_CTRL_PARAM6 = 0x0D, - AUDIO20_EN_CTRL_PARAM7 = 0x0E, - AUDIO20_EN_CTRL_PARAM8 = 0x0F, +typedef enum { + AUDIO20_EN_CTRL_UNDEF = 0x00, + AUDIO20_EN_CTRL_BIT_RATE = 0x01, + AUDIO20_EN_CTRL_QUALITY = 0x02, + AUDIO20_EN_CTRL_VBR = 0x03, + AUDIO20_EN_CTRL_TYPE = 0x04, + AUDIO20_EN_CTRL_UNDERFLOW = 0x05, + AUDIO20_EN_CTRL_OVERFLOW = 0x06, + AUDIO20_EN_CTRL_ENCODER_ERROR = 0x07, + AUDIO20_EN_CTRL_PARAM1 = 0x08, + AUDIO20_EN_CTRL_PARAM2 = 0x09, + AUDIO20_EN_CTRL_PARAM3 = 0x0A, + AUDIO20_EN_CTRL_PARAM4 = 0x0B, + AUDIO20_EN_CTRL_PARAM5 = 0x0C, + AUDIO20_EN_CTRL_PARAM6 = 0x0D, + AUDIO20_EN_CTRL_PARAM7 = 0x0E, + AUDIO20_EN_CTRL_PARAM8 = 0x0F, } audio20_encoder_control_selector_t; /// A.17.13 Decoder Control Selectors /// A.17.13.1 MPEG Decoder Control Selectors -typedef enum -{ - AUDIO20_MPD_CTRL_UNDEF = 0x00, - AUDIO20_MPD_CTRL_DUAL_CHANNEL = 0x01, - AUDIO20_MPD_CTRL_SECOND_STEREO = 0x02, - AUDIO20_MPD_CTRL_MULTILINGUAL = 0x03, - AUDIO20_MPD_CTRL_DYN_RANGE = 0x04, - AUDIO20_MPD_CTRL_SCALING = 0x05, - AUDIO20_MPD_CTRL_HILO_SCALING = 0x06, - AUDIO20_MPD_CTRL_UNDERFLOW = 0x07, - AUDIO20_MPD_CTRL_OVERFLOW = 0x08, - AUDIO20_MPD_CTRL_DECODER_ERROR = 0x09, +typedef enum { + AUDIO20_MPD_CTRL_UNDEF = 0x00, + AUDIO20_MPD_CTRL_DUAL_CHANNEL = 0x01, + AUDIO20_MPD_CTRL_SECOND_STEREO = 0x02, + AUDIO20_MPD_CTRL_MULTILINGUAL = 0x03, + AUDIO20_MPD_CTRL_DYN_RANGE = 0x04, + AUDIO20_MPD_CTRL_SCALING = 0x05, + AUDIO20_MPD_CTRL_HILO_SCALING = 0x06, + AUDIO20_MPD_CTRL_UNDERFLOW = 0x07, + AUDIO20_MPD_CTRL_OVERFLOW = 0x08, + AUDIO20_MPD_CTRL_DECODER_ERROR = 0x09, } audio20_MPEG_decoder_control_selector_t; /// A.17.13.2 AC-3 Decoder Control Selectors -typedef enum -{ - AUDIO20_AD_CTRL_UNDEF = 0x00, - AUDIO20_AD_CTRL_MODE = 0x01, - AUDIO20_AD_CTRL_DYN_RANGE = 0x02, - AUDIO20_AD_CTRL_SCALING = 0x03, - AUDIO20_AD_CTRL_HILO_SCALING = 0x04, - AUDIO20_AD_CTRL_UNDERFLOW = 0x05, - AUDIO20_AD_CTRL_OVERFLOW = 0x06, - AUDIO20_AD_CTRL_DECODER_ERROR = 0x07, +typedef enum { + AUDIO20_AD_CTRL_UNDEF = 0x00, + AUDIO20_AD_CTRL_MODE = 0x01, + AUDIO20_AD_CTRL_DYN_RANGE = 0x02, + AUDIO20_AD_CTRL_SCALING = 0x03, + AUDIO20_AD_CTRL_HILO_SCALING = 0x04, + AUDIO20_AD_CTRL_UNDERFLOW = 0x05, + AUDIO20_AD_CTRL_OVERFLOW = 0x06, + AUDIO20_AD_CTRL_DECODER_ERROR = 0x07, } audio20_AC3_decoder_control_selector_t; /// A.17.13.3 WMA Decoder Control Selectors -typedef enum -{ - AUDIO20_WD_CTRL_UNDEF = 0x00, - AUDIO20_WD_CTRL_UNDERFLOW = 0x01, - AUDIO20_WD_CTRL_OVERFLOW = 0x02, - AUDIO20_WD_CTRL_DECODER_ERROR = 0x03, +typedef enum { + AUDIO20_WD_CTRL_UNDEF = 0x00, + AUDIO20_WD_CTRL_UNDERFLOW = 0x01, + AUDIO20_WD_CTRL_OVERFLOW = 0x02, + AUDIO20_WD_CTRL_DECODER_ERROR = 0x03, } audio20_WMA_decoder_control_selector_t; /// A.17.13.4 DTS Decoder Control Selectors -typedef enum -{ - AUDIO20_DD_CTRL_UNDEF = 0x00, - AUDIO20_DD_CTRL_UNDERFLOW = 0x01, - AUDIO20_DD_CTRL_OVERFLOW = 0x02, - AUDIO20_DD_CTRL_DECODER_ERROR = 0x03, +typedef enum { + AUDIO20_DD_CTRL_UNDEF = 0x00, + AUDIO20_DD_CTRL_UNDERFLOW = 0x01, + AUDIO20_DD_CTRL_OVERFLOW = 0x02, + AUDIO20_DD_CTRL_DECODER_ERROR = 0x03, } audio20_DTS_decoder_control_selector_t; /// A.17.14 Endpoint Control Selectors -typedef enum -{ - AUDIO20_EP_CTRL_UNDEF = 0x00, - AUDIO20_EP_CTRL_PITCH = 0x01, - AUDIO20_EP_CTRL_DATA_OVERRUN = 0x02, - AUDIO20_EP_CTRL_DATA_UNDERRUN = 0x03, +typedef enum { + AUDIO20_EP_CTRL_UNDEF = 0x00, + AUDIO20_EP_CTRL_PITCH = 0x01, + AUDIO20_EP_CTRL_DATA_OVERRUN = 0x02, + AUDIO20_EP_CTRL_DATA_UNDERRUN = 0x03, } audio20_EP_control_selector_t; -/// Terminal Types - -/// 2.1 - Audio Class-Terminal Types UAC2 -typedef enum -{ - AUDIO20_TERM_TYPE_USB_UNDEFINED = 0x0100, - AUDIO20_TERM_TYPE_USB_STREAMING = 0x0101, - AUDIO20_TERM_TYPE_USB_VENDOR_SPEC = 0x01FF, -} audio20_terminal_type_t; - -/// 2.2 - Audio Class-Input Terminal Types UAC2 -typedef enum -{ - AUDIO20_TERM_TYPE_IN_UNDEFINED = 0x0200, - AUDIO20_TERM_TYPE_IN_GENERIC_MIC = 0x0201, - AUDIO20_TERM_TYPE_IN_DESKTOP_MIC = 0x0202, - AUDIO20_TERM_TYPE_IN_PERSONAL_MIC = 0x0203, - AUDIO20_TERM_TYPE_IN_OMNI_MIC = 0x0204, - AUDIO20_TERM_TYPE_IN_ARRAY_MIC = 0x0205, - AUDIO20_TERM_TYPE_IN_PROC_ARRAY_MIC = 0x0206, -} audio20_terminal_input_type_t; - -/// 2.3 - Audio Class-Output Terminal Types UAC2 -typedef enum -{ - AUDIO20_TERM_TYPE_OUT_UNDEFINED = 0x0300, - AUDIO20_TERM_TYPE_OUT_GENERIC_SPEAKER = 0x0301, - AUDIO20_TERM_TYPE_OUT_HEADPHONES = 0x0302, - AUDIO20_TERM_TYPE_OUT_HEAD_MNT_DISP_AUIDO = 0x0303, - AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER = 0x0304, - AUDIO20_TERM_TYPE_OUT_ROOM_SPEAKER = 0x0305, - AUDIO20_TERM_TYPE_OUT_COMMUNICATION_SPEAKER = 0x0306, - AUDIO20_TERM_TYPE_OUT_LOW_FRQ_EFFECTS_SPEAKER = 0x0307, -} audio20_terminal_output_type_t; - -/// Rest is yet to be implemented - /// Additional Audio Device Class Codes - Source: Audio Data Formats /// A.1 - Audio Class-Format Type Codes UAC2 -typedef enum -{ - AUDIO20_FORMAT_TYPE_UNDEFINED = 0x00, - AUDIO20_FORMAT_TYPE_I = 0x01, - AUDIO20_FORMAT_TYPE_II = 0x02, - AUDIO20_FORMAT_TYPE_III = 0x03, - AUDIO20_FORMAT_TYPE_IV = 0x04, - AUDIO20_EXT_FORMAT_TYPE_I = 0x81, - AUDIO20_EXT_FORMAT_TYPE_II = 0x82, - AUDIO20_EXT_FORMAT_TYPE_III = 0x83, +typedef enum { + AUDIO20_FORMAT_TYPE_UNDEFINED = 0x00, + AUDIO20_FORMAT_TYPE_I = 0x01, + AUDIO20_FORMAT_TYPE_II = 0x02, + AUDIO20_FORMAT_TYPE_III = 0x03, + AUDIO20_FORMAT_TYPE_IV = 0x04, + AUDIO20_EXT_FORMAT_TYPE_I = 0x81, + AUDIO20_EXT_FORMAT_TYPE_II = 0x82, + AUDIO20_EXT_FORMAT_TYPE_III = 0x83, } audio20_format_type_t; // A.2.1 - Audio Class-Audio Data Format Type I UAC2 -typedef enum -{ - AUDIO20_DATA_FORMAT_TYPE_I_PCM = (uint32_t) (1 << 0), - AUDIO20_DATA_FORMAT_TYPE_I_PCM8 = (uint32_t) (1 << 1), - AUDIO20_DATA_FORMAT_TYPE_I_IEEE_FLOAT = (uint32_t) (1 << 2), - AUDIO20_DATA_FORMAT_TYPE_I_ALAW = (uint32_t) (1 << 3), - AUDIO20_DATA_FORMAT_TYPE_I_MULAW = (uint32_t) (1 << 4), - AUDIO20_DATA_FORMAT_TYPE_I_RAW_DATA = 0x80000000u, +typedef enum { + AUDIO20_DATA_FORMAT_TYPE_I_PCM = (uint32_t) (1 << 0), + AUDIO20_DATA_FORMAT_TYPE_I_PCM8 = (uint32_t) (1 << 1), + AUDIO20_DATA_FORMAT_TYPE_I_IEEE_FLOAT = (uint32_t) (1 << 2), + AUDIO20_DATA_FORMAT_TYPE_I_ALAW = (uint32_t) (1 << 3), + AUDIO20_DATA_FORMAT_TYPE_I_MULAW = (uint32_t) (1 << 4), + AUDIO20_DATA_FORMAT_TYPE_I_RAW_DATA = 0x80000000u, } audio20_data_format_type_I_t; /// Audio Class-Audio Channel Configuration UAC2 (Table A-11) -typedef enum -{ - AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED = 0x00000000, - AUDIO20_CHANNEL_CONFIG_FRONT_LEFT = 0x00000001, - AUDIO20_CHANNEL_CONFIG_FRONT_RIGHT = 0x00000002, - AUDIO20_CHANNEL_CONFIG_FRONT_CENTER = 0x00000004, - AUDIO20_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x00000008, - AUDIO20_CHANNEL_CONFIG_BACK_LEFT = 0x00000010, - AUDIO20_CHANNEL_CONFIG_BACK_RIGHT = 0x00000020, +typedef enum { + AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED = 0x00000000, + AUDIO20_CHANNEL_CONFIG_FRONT_LEFT = 0x00000001, + AUDIO20_CHANNEL_CONFIG_FRONT_RIGHT = 0x00000002, + AUDIO20_CHANNEL_CONFIG_FRONT_CENTER = 0x00000004, + AUDIO20_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x00000008, + AUDIO20_CHANNEL_CONFIG_BACK_LEFT = 0x00000010, + AUDIO20_CHANNEL_CONFIG_BACK_RIGHT = 0x00000020, AUDIO20_CHANNEL_CONFIG_FRONT_LEFT_OF_CENTER = 0x00000040, AUDIO20_CHANNEL_CONFIG_FRONT_RIGHT_OF_CENTER = 0x00000080, - AUDIO20_CHANNEL_CONFIG_BACK_CENTER = 0x00000100, - AUDIO20_CHANNEL_CONFIG_SIDE_LEFT = 0x00000200, - AUDIO20_CHANNEL_CONFIG_SIDE_RIGHT = 0x00000400, - AUDIO20_CHANNEL_CONFIG_TOP_CENTER = 0x00000800, - AUDIO20_CHANNEL_CONFIG_TOP_FRONT_LEFT = 0x00001000, - AUDIO20_CHANNEL_CONFIG_TOP_FRONT_CENTER = 0x00002000, - AUDIO20_CHANNEL_CONFIG_TOP_FRONT_RIGHT = 0x00004000, - AUDIO20_CHANNEL_CONFIG_TOP_BACK_LEFT = 0x00008000, - AUDIO20_CHANNEL_CONFIG_TOP_BACK_CENTER = 0x00010000, - AUDIO20_CHANNEL_CONFIG_TOP_BACK_RIGHT = 0x00020000, + AUDIO20_CHANNEL_CONFIG_BACK_CENTER = 0x00000100, + AUDIO20_CHANNEL_CONFIG_SIDE_LEFT = 0x00000200, + AUDIO20_CHANNEL_CONFIG_SIDE_RIGHT = 0x00000400, + AUDIO20_CHANNEL_CONFIG_TOP_CENTER = 0x00000800, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_LEFT = 0x00001000, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_CENTER = 0x00002000, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_RIGHT = 0x00004000, + AUDIO20_CHANNEL_CONFIG_TOP_BACK_LEFT = 0x00008000, + AUDIO20_CHANNEL_CONFIG_TOP_BACK_CENTER = 0x00010000, + AUDIO20_CHANNEL_CONFIG_TOP_BACK_RIGHT = 0x00020000, AUDIO20_CHANNEL_CONFIG_TOP_FRONT_LEFT_OF_CENTER = 0x00040000, AUDIO20_CHANNEL_CONFIG_TOP_FRONT_RIGHT_OF_CENTER = 0x00080000, AUDIO20_CHANNEL_CONFIG_LEFT_LOW_FRQ_EFFECTS = 0x00100000, AUDIO20_CHANNEL_CONFIG_RIGHT_LOW_FRQ_EFFECTS = 0x00200000, - AUDIO20_CHANNEL_CONFIG_TOP_SIDE_LEFT = 0x00400000, - AUDIO20_CHANNEL_CONFIG_TOP_SIDE_RIGHT = 0x00800000, - AUDIO20_CHANNEL_CONFIG_BOTTOM_CENTER = 0x01000000, - AUDIO20_CHANNEL_CONFIG_BACK_LEFT_OF_CENTER = 0x02000000, + AUDIO20_CHANNEL_CONFIG_TOP_SIDE_LEFT = 0x00400000, + AUDIO20_CHANNEL_CONFIG_TOP_SIDE_RIGHT = 0x00800000, + AUDIO20_CHANNEL_CONFIG_BOTTOM_CENTER = 0x01000000, + AUDIO20_CHANNEL_CONFIG_BACK_LEFT_OF_CENTER = 0x02000000, AUDIO20_CHANNEL_CONFIG_BACK_RIGHT_OF_CENTER = 0x04000000, - AUDIO20_CHANNEL_CONFIG_RAW_DATA = 0x80000000, + AUDIO20_CHANNEL_CONFIG_RAW_DATA = 0x80000000, } audio20_channel_config_t; /// All remaining definitions are taken from the descriptor descriptions in the UAC2 main specification /// Audio Class-Control Values UAC2 -typedef enum -{ - AUDIO20_CTRL_NONE = 0x00, ///< No Host access - AUDIO20_CTRL_R = 0x01, ///< Host read access only - AUDIO20_CTRL_RW = 0x03, ///< Host read write access +typedef enum { + AUDIO20_CTRL_NONE = 0x00,///< No Host access + AUDIO20_CTRL_R = 0x01, ///< Host read access only + AUDIO20_CTRL_RW = 0x03, ///< Host read write access } audio20_control_t; /// Audio Class-Specific AC Interface Descriptor Controls UAC2 -typedef enum -{ - AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS = 0, +typedef enum { + AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS = 0, } audio20_cs_ac_interface_control_pos_t; /// Audio Class-Specific AS Interface Descriptor Controls UAC2 -typedef enum -{ - AUDIO20_CS_AS_INTERFACE_CTRL_ACTIVE_ALT_SET_POS = 0, - AUDIO20_CS_AS_INTERFACE_CTRL_VALID_ALT_SET_POS = 2, +typedef enum { + AUDIO20_CS_AS_INTERFACE_CTRL_ACTIVE_ALT_SET_POS = 0, + AUDIO20_CS_AS_INTERFACE_CTRL_VALID_ALT_SET_POS = 2, } audio20_cs_as_interface_control_pos_t; /// Audio Class-Specific AS Isochronous Data EP Attributes UAC2 -typedef enum -{ - AUDIO20_CS_AS_ISO_DATA_EP_ATT_MAX_PACKETS_ONLY = 0x80, - AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK = 0x00, +typedef enum { + AUDIO20_CS_AS_ISO_DATA_EP_ATT_MAX_PACKETS_ONLY = 0x80, + AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK = 0x00, } audio20_cs_as_iso_data_ep_attribute_t; /// Audio Class-Specific AS Isochronous Data EP Controls UAC2 -typedef enum -{ - AUDIO20_CS_AS_ISO_DATA_EP_CTRL_PITCH_POS = 0, - AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_OVERRUN_POS = 2, - AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_UNDERRUN_POS = 4, +typedef enum { + AUDIO20_CS_AS_ISO_DATA_EP_CTRL_PITCH_POS = 0, + AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_OVERRUN_POS = 2, + AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_UNDERRUN_POS = 4, } audio20_cs_as_iso_data_ep_control_pos_t; /// Audio Class-Specific AS Isochronous Data EP Lock Delay Units UAC2 -typedef enum -{ - AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED = 0x00, - AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC = 0x01, - AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_PCM_SAMPLES = 0x02, +typedef enum { + AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED = 0x00, + AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC = 0x01, + AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_PCM_SAMPLES = 0x02, } audio20_cs_as_iso_data_ep_lock_delay_unit_t; /// Audio Class-Clock Source Attributes UAC2 -typedef enum -{ - AUDIO20_CLOCK_SOURCE_ATT_EXT_CLK = 0x00, - AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK = 0x01, - AUDIO20_CLOCK_SOURCE_ATT_INT_VAR_CLK = 0x02, - AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK = 0x03, - AUDIO20_CLOCK_SOURCE_ATT_CLK_SYC_SOF = 0x04, +typedef enum { + AUDIO20_CLOCK_SOURCE_ATT_EXT_CLK = 0x00, + AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK = 0x01, + AUDIO20_CLOCK_SOURCE_ATT_INT_VAR_CLK = 0x02, + AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK = 0x03, + AUDIO20_CLOCK_SOURCE_ATT_CLK_SYC_SOF = 0x04, } audio20_clock_source_attribute_t; /// Audio Class-Clock Source Controls UAC2 -typedef enum -{ - AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS = 0, - AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS = 2, +typedef enum { + AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS = 0, + AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS = 2, } audio20_clock_source_control_pos_t; /// Audio Class-Clock Selector Controls UAC2 -typedef enum -{ - AUDIO20_CLOCK_SELECTOR_CTRL_POS = 0, +typedef enum { + AUDIO20_CLOCK_SELECTOR_CTRL_POS = 0, } audio20_clock_selector_control_pos_t; /// Audio Class-Clock Multiplier Controls UAC2 -typedef enum -{ - AUDIO20_CLOCK_MULTIPLIER_CTRL_NUMERATOR_POS = 0, - AUDIO20_CLOCK_MULTIPLIER_CTRL_DENOMINATOR_POS = 2, +typedef enum { + AUDIO20_CLOCK_MULTIPLIER_CTRL_NUMERATOR_POS = 0, + AUDIO20_CLOCK_MULTIPLIER_CTRL_DENOMINATOR_POS = 2, } audio20_clock_multiplier_control_pos_t; /// Audio Class-Input Terminal Controls UAC2 -typedef enum -{ - AUDIO20_IN_TERM_CTRL_CPY_PROT_POS = 0, - AUDIO20_IN_TERM_CTRL_CONNECTOR_POS = 2, - AUDIO20_IN_TERM_CTRL_OVERLOAD_POS = 4, - AUDIO20_IN_TERM_CTRL_CLUSTER_POS = 6, - AUDIO20_IN_TERM_CTRL_UNDERFLOW_POS = 8, - AUDIO20_IN_TERM_CTRL_OVERFLOW_POS = 10, +typedef enum { + AUDIO20_IN_TERM_CTRL_CPY_PROT_POS = 0, + AUDIO20_IN_TERM_CTRL_CONNECTOR_POS = 2, + AUDIO20_IN_TERM_CTRL_OVERLOAD_POS = 4, + AUDIO20_IN_TERM_CTRL_CLUSTER_POS = 6, + AUDIO20_IN_TERM_CTRL_UNDERFLOW_POS = 8, + AUDIO20_IN_TERM_CTRL_OVERFLOW_POS = 10, } audio20_terminal_input_control_pos_t; /// Audio Class-Output Terminal Controls UAC2 -typedef enum -{ - AUDIO20_OUT_TERM_CTRL_CPY_PROT_POS = 0, - AUDIO20_OUT_TERM_CTRL_CONNECTOR_POS = 2, - AUDIO20_OUT_TERM_CTRL_OVERLOAD_POS = 4, - AUDIO20_OUT_TERM_CTRL_UNDERFLOW_POS = 6, - AUDIO20_OUT_TERM_CTRL_OVERFLOW_POS = 8, +typedef enum { + AUDIO20_OUT_TERM_CTRL_CPY_PROT_POS = 0, + AUDIO20_OUT_TERM_CTRL_CONNECTOR_POS = 2, + AUDIO20_OUT_TERM_CTRL_OVERLOAD_POS = 4, + AUDIO20_OUT_TERM_CTRL_UNDERFLOW_POS = 6, + AUDIO20_OUT_TERM_CTRL_OVERFLOW_POS = 8, } audio20_terminal_output_control_pos_t; /// Audio Class-Feature Unit Controls UAC2 -typedef enum -{ - AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS = 0, - AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS = 2, - AUDIO20_FEATURE_UNIT_CTRL_BASS_POS = 4, - AUDIO20_FEATURE_UNIT_CTRL_MID_POS = 6, - AUDIO20_FEATURE_UNIT_CTRL_TREBLE_POS = 8, - AUDIO20_FEATURE_UNIT_CTRL_GRAPHIC_EQU_POS = 10, - AUDIO20_FEATURE_UNIT_CTRL_AGC_POS = 12, - AUDIO20_FEATURE_UNIT_CTRL_DELAY_POS = 14, - AUDIO20_FEATURE_UNIT_CTRL_BASS_BOOST_POS = 16, - AUDIO20_FEATURE_UNIT_CTRL_LOUDNESS_POS = 18, - AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_POS = 20, - AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_PAD_POS = 22, - AUDIO20_FEATURE_UNIT_CTRL_PHASE_INV_POS = 24, - AUDIO20_FEATURE_UNIT_CTRL_UNDERFLOW_POS = 26, - AUDIO20_FEATURE_UNIT_CTRL_OVERFLOW_POS = 28, +typedef enum { + AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS = 0, + AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS = 2, + AUDIO20_FEATURE_UNIT_CTRL_BASS_POS = 4, + AUDIO20_FEATURE_UNIT_CTRL_MID_POS = 6, + AUDIO20_FEATURE_UNIT_CTRL_TREBLE_POS = 8, + AUDIO20_FEATURE_UNIT_CTRL_GRAPHIC_EQU_POS = 10, + AUDIO20_FEATURE_UNIT_CTRL_AGC_POS = 12, + AUDIO20_FEATURE_UNIT_CTRL_DELAY_POS = 14, + AUDIO20_FEATURE_UNIT_CTRL_BASS_BOOST_POS = 16, + AUDIO20_FEATURE_UNIT_CTRL_LOUDNESS_POS = 18, + AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_POS = 20, + AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_PAD_POS = 22, + AUDIO20_FEATURE_UNIT_CTRL_PHASE_INV_POS = 24, + AUDIO20_FEATURE_UNIT_CTRL_UNDERFLOW_POS = 26, + AUDIO20_FEATURE_UNIT_CTRL_OVERFLOW_POS = 28, } audio20_feature_unit_control_pos_t; //--------------------------------------------------------------------+ @@ -1048,282 +1013,276 @@ typedef enum /// AUDIO Channel Cluster Descriptor UAC2 (4.1) typedef struct TU_ATTR_PACKED { - uint8_t bNrChannels; ///< Number of channels currently connected. - audio20_channel_config_t bmChannelConfig; ///< Bitmap according to 'audio20_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. - uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first inserted channel with a non-predefined spatial location. + uint8_t bNrChannels; ///< Number of channels currently connected. + audio20_channel_config_t bmChannelConfig;///< Bitmap according to 'audio20_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. + uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first inserted channel with a non-predefined spatial location. } audio20_desc_channel_cluster_t; /// AUDIO Class-Specific AC Interface Header Descriptor UAC2 (4.7.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 9. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_HEADER. - uint16_t bcdADC ; ///< Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: U16_TO_U8S_LE(0x0200). - uint8_t bCategory ; ///< Constant, indicating the primary use of this audio function, as intended by the manufacturer. See: audio20_function_code_t. - uint16_t wTotalLength ; ///< Total number of bytes returned for the class-specific AudioControl interface descriptor. Includes the combined length of this descriptor header and all Clock Source, Unit and Terminal descriptors. - uint8_t bmControls ; ///< See: audio20_cs_ac_interface_control_pos_t. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 9. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_HEADER. + uint16_t bcdADC; ///< Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: U16_TO_U8S_LE(0x0200). + uint8_t bCategory; ///< Constant, indicating the primary use of this audio function, as intended by the manufacturer. See: audio20_function_code_t. + uint16_t wTotalLength; ///< Total number of bytes returned for the class-specific AudioControl interface descriptor. Includes the combined length of this descriptor header and all Clock Source, Unit and Terminal descriptors. + uint8_t bmControls; ///< See: audio20_cs_ac_interface_control_pos_t. } audio20_desc_cs_ac_interface_t; TU_VERIFY_STATIC(sizeof(audio20_desc_cs_ac_interface_t) == 9, "size is not correct"); /// AUDIO Clock Source Descriptor UAC2 (4.7.2.1) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 8. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE. - uint8_t bClockID ; ///< Constant uniquely identifying the Clock Source Entity within the audio function. This value is used in all requests to address this Entity. - uint8_t bmAttributes ; ///< See: audio20_clock_source_attribute_t. - uint8_t bmControls ; ///< See: audio20_clock_source_control_pos_t. - uint8_t bAssocTerminal ; ///< Terminal ID of the Terminal that is associated with this Clock Source. - uint8_t iClockSource ; ///< Index of a string descriptor, describing the Clock Source Entity. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 8. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE. + uint8_t bClockID; ///< Constant uniquely identifying the Clock Source Entity within the audio function. This value is used in all requests to address this Entity. + uint8_t bmAttributes; ///< See: audio20_clock_source_attribute_t. + uint8_t bmControls; ///< See: audio20_clock_source_control_pos_t. + uint8_t bAssocTerminal; ///< Terminal ID of the Terminal that is associated with this Clock Source. + uint8_t iClockSource; ///< Index of a string descriptor, describing the Clock Source Entity. } audio20_desc_clock_source_t; /// AUDIO Clock Selector Descriptor UAC2 (4.7.2.2) for ONE pin -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 7+p. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR. - uint8_t bClockID ; ///< Constant uniquely identifying the Clock Selector Entity within the audio function. This value is used in all requests to address this Entity. - uint8_t bNrInPins ; ///< Number of Input Pins of this Unit: p = 1 thus bNrInPins = 1. - uint8_t baCSourceID ; ///< ID of the Clock Entity to which the first Clock Input Pin of this Clock Selector Entity is connected.. - uint8_t bmControls ; ///< See: audio20_clock_selector_control_pos_t. - uint8_t iClockSource ; ///< Index of a string descriptor, describing the Clock Selector Entity. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 7+p. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR. + uint8_t bClockID; ///< Constant uniquely identifying the Clock Selector Entity within the audio function. This value is used in all requests to address this Entity. + uint8_t bNrInPins; ///< Number of Input Pins of this Unit: p = 1 thus bNrInPins = 1. + uint8_t baCSourceID; ///< ID of the Clock Entity to which the first Clock Input Pin of this Clock Selector Entity is connected.. + uint8_t bmControls; ///< See: audio20_clock_selector_control_pos_t. + uint8_t iClockSource; ///< Index of a string descriptor, describing the Clock Selector Entity. } audio20_desc_clock_selector_t; /// AUDIO Clock Selector Descriptor (4.7.2.2) for multiple pins #define audio20_desc_clock_selector_n_t(source_num) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; \ - uint8_t bDescriptorType ; \ - uint8_t bDescriptorSubType ; \ - uint8_t bClockID ; \ - uint8_t bNrInPins ; \ - struct TU_ATTR_PACKED { \ - uint8_t baSourceID ; \ - } sourceID[source_num] ; \ - uint8_t bmControls ; \ - uint8_t iClockSource ; \ -} + struct TU_ATTR_PACKED { \ + uint8_t bLength; \ + uint8_t bDescriptorType; \ + uint8_t bDescriptorSubType; \ + uint8_t bClockID; \ + uint8_t bNrInPins; \ + struct TU_ATTR_PACKED { \ + uint8_t baSourceID; \ + } sourceID[source_num]; \ + uint8_t bmControls; \ + uint8_t iClockSource; \ + } /// AUDIO Clock Multiplier Descriptor UAC2 (4.7.2.3) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 7. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER. - uint8_t bClockID ; ///< Constant uniquely identifying the Clock Multiplier Entity within the audio function. This value is used in all requests to address this Entity. - uint8_t bCSourceID ; ///< ID of the Clock Entity to which the last Clock Input Pin of this Clock Selector Entity is connected. - uint8_t bmControls ; ///< See: audio20_clock_multiplier_control_pos_t. - uint8_t iClockSource ; ///< Index of a string descriptor, describing the Clock Multiplier Entity. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 7. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER. + uint8_t bClockID; ///< Constant uniquely identifying the Clock Multiplier Entity within the audio function. This value is used in all requests to address this Entity. + uint8_t bCSourceID; ///< ID of the Clock Entity to which the last Clock Input Pin of this Clock Selector Entity is connected. + uint8_t bmControls; ///< See: audio20_clock_multiplier_control_pos_t. + uint8_t iClockSource; ///< Index of a string descriptor, describing the Clock Multiplier Entity. } audio20_desc_clock_multiplier_t; /// AUDIO Input Terminal Descriptor(4.7.2.4) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 17. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_INPUT_TERMINAL. - uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. This value is used in all requests to address this terminal. - uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. See: audio_terminal_type_t for USB streaming and audio_terminal_input_type_t for other input types. - uint8_t bAssocTerminal ; ///< ID of the Output Terminal to which this Input Terminal is associated. - uint8_t bCSourceID ; ///< ID of the Clock Entity to which this Input Terminal is connected. - uint8_t bNrChannels ; ///< Number of logical output channels in the Terminal’s output audio channel cluster. - uint32_t bmChannelConfig ; ///< Describes the spatial location of the logical channels. See:audio20_channel_config_t. - uint8_t iChannelNames ; ///< Index of a string descriptor, describing the name of the first logical channel. - uint16_t bmControls ; ///< See: audio_terminal_input_control_pos_t. - uint8_t iTerminal ; ///< Index of a string descriptor, describing the Input Terminal. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 17. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_INPUT_TERMINAL. + uint8_t bTerminalID; ///< Constant uniquely identifying the Terminal within the audio function. This value is used in all requests to address this terminal. + uint16_t wTerminalType; ///< Constant characterizing the type of Terminal. See: audio_terminal_type_t for USB streaming and audio_terminal_input_type_t for other input types. + uint8_t bAssocTerminal; ///< ID of the Output Terminal to which this Input Terminal is associated. + uint8_t bCSourceID; ///< ID of the Clock Entity to which this Input Terminal is connected. + uint8_t bNrChannels; ///< Number of logical output channels in the Terminal’s output audio channel cluster. + uint32_t bmChannelConfig; ///< Describes the spatial location of the logical channels. See:audio20_channel_config_t. + uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first logical channel. + uint16_t bmControls; ///< See: audio_terminal_input_control_pos_t. + uint8_t iTerminal; ///< Index of a string descriptor, describing the Input Terminal. } audio20_desc_input_terminal_t; /// AUDIO Output Terminal Descriptor UAC2 (4.7.2.5) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 12. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL. - uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. This value is used in all requests to address this Terminal. - uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. See: audio20_terminal_type_t for USB streaming and audio20_terminal_output_type_t for other output types. - uint8_t bAssocTerminal ; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. - uint8_t bSourceID ; ///< ID of the Unit or Terminal to which this Terminal is connected. - uint8_t bCSourceID ; ///< ID of the Clock Entity to which this Output Terminal is connected. - uint16_t bmControls ; ///< See: audio20_terminal_output_control_pos_t. - uint8_t iTerminal ; ///< Index of a string descriptor, describing the Output Terminal. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 12. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL. + uint8_t bTerminalID; ///< Constant uniquely identifying the Terminal within the audio function. This value is used in all requests to address this Terminal. + uint16_t wTerminalType; ///< Constant characterizing the type of Terminal. See: audio20_terminal_type_t for USB streaming and audio20_terminal_output_type_t for other output types. + uint8_t bAssocTerminal; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. + uint8_t bSourceID; ///< ID of the Unit or Terminal to which this Terminal is connected. + uint8_t bCSourceID; ///< ID of the Clock Entity to which this Output Terminal is connected. + uint16_t bmControls; ///< See: audio20_terminal_output_control_pos_t. + uint8_t iTerminal; ///< Index of a string descriptor, describing the Output Terminal. } audio20_desc_output_terminal_t; /// AUDIO Feature Unit Descriptor UAC2 (4.7.2.8) for ONE channel -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 14. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT. - uint8_t bUnitID ; ///< Constant uniquely identifying the Unit within the audio function. This value is used in all requests to address this Unit. - uint8_t bSourceID ; ///< ID of the Unit or Terminal to which this Feature Unit is connected. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 14. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT. + uint8_t bUnitID; ///< Constant uniquely identifying the Unit within the audio function. This value is used in all requests to address this Unit. + uint8_t bSourceID; ///< ID of the Unit or Terminal to which this Feature Unit is connected. struct TU_ATTR_PACKED { - uint32_t bmaControls ; ///< See: audio20_feature_unit_control_pos_t. Controls0 is master channel 0 (always present) and Controls1 is logical channel 1. - } controls[2] ; - uint8_t iTerminal ; ///< Index of a string descriptor, describing this Feature Unit. + uint32_t bmaControls;///< See: audio20_feature_unit_control_pos_t. Controls0 is master channel 0 (always present) and Controls1 is logical channel 1. + } controls[2]; + uint8_t iTerminal;///< Index of a string descriptor, describing this Feature Unit. } audio20_desc_feature_unit_t; /// AUDIO Feature Unit Descriptor(4.7.2.8) for multiple channels -#define audio20_desc_feature_unit_n_t(ch_num)\ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* 6+(ch_num+1)*4 */\ - uint8_t bDescriptorType ; \ - uint8_t bDescriptorSubType ; \ - uint8_t bUnitID ; \ - uint8_t bSourceID ; \ - struct TU_ATTR_PACKED { \ - uint32_t bmaControls ; \ - } controls[ch_num+1] ; \ - uint8_t iTerminal ; \ -} +#define audio20_desc_feature_unit_n_t(ch_num) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* 6+(ch_num+1)*4 */ \ + uint8_t bDescriptorType; \ + uint8_t bDescriptorSubType; \ + uint8_t bUnitID; \ + uint8_t bSourceID; \ + struct TU_ATTR_PACKED { \ + uint32_t bmaControls; \ + } controls[ch_num + 1]; \ + uint8_t iTerminal; \ + } /// AUDIO Class-Specific AS Interface Descriptor(4.9.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 16. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_AS_GENERAL. - uint8_t bTerminalLink ; ///< The Terminal ID of the Terminal to which this interface is connected. - uint8_t bmControls ; ///< See: audio20_cs_as_interface_control_pos_t. - uint8_t bFormatType ; ///< Constant identifying the Format Type the AudioStreaming interface is using. See: audio20_format_type_t. - uint32_t bmFormats ; ///< The Audio Data Format(s) that can be used to communicate with this interface.See: audio20_data_format_type_I_t. - uint8_t bNrChannels ; ///< Number of physical channels in the AS Interface audio channel cluster. - uint32_t bmChannelConfig ; ///< Describes the spatial location of the physical channels. See: audio20_channel_config_t. - uint8_t iChannelNames ; ///< Index of a string descriptor, describing the name of the first physical channel. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 16. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_AS_GENERAL. + uint8_t bTerminalLink; ///< The Terminal ID of the Terminal to which this interface is connected. + uint8_t bmControls; ///< See: audio20_cs_as_interface_control_pos_t. + uint8_t bFormatType; ///< Constant identifying the Format Type the AudioStreaming interface is using. See: audio20_format_type_t. + uint32_t bmFormats; ///< The Audio Data Format(s) that can be used to communicate with this interface.See: audio20_data_format_type_I_t. + uint8_t bNrChannels; ///< Number of physical channels in the AS Interface audio channel cluster. + uint32_t bmChannelConfig; ///< Describes the spatial location of the physical channels. See: audio20_channel_config_t. + uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first physical channel. } audio20_desc_cs_as_interface_t; /// AUDIO Type I Format Type Descriptor(2.3.1.6 - Audio Formats) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 6. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE. - uint8_t bFormatType ; ///< Constant identifying the Format Type the AudioStreaming interface is using. Value: AUDIO20_FORMAT_TYPE_I. - uint8_t bSubslotSize ; ///< The number of bytes occupied by one audio subslot. Can be 1, 2, 3 or 4. - uint8_t bBitResolution ; ///< The number of effectively used bits from the available bits in an audio subslot. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 6. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE. + uint8_t bFormatType; ///< Constant identifying the Format Type the AudioStreaming interface is using. Value: AUDIO20_FORMAT_TYPE_I. + uint8_t bSubslotSize; ///< The number of bytes occupied by one audio subslot. Can be 1, 2, 3 or 4. + uint8_t bBitResolution; ///< The number of effectively used bits from the available bits in an audio subslot. } audio20_desc_type_I_format_t; /// AUDIO Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 8. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_EP_SUBTYPE_GENERAL. - uint8_t bmAttributes ; ///< See: audio20_cs_as_iso_data_ep_attribute_t. - uint8_t bmControls ; ///< See: audio20_cs_as_iso_data_ep_control_pos_t. - uint8_t bLockDelayUnits ; ///< Indicates the units used for the wLockDelay field. See: audio20_cs_as_iso_data_ep_lock_delay_unit_t. - uint16_t wLockDelay ; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. Units used depend on the value of the bLockDelayUnits field. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 8. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_EP_SUBTYPE_GENERAL. + uint8_t bmAttributes; ///< See: audio20_cs_as_iso_data_ep_attribute_t. + uint8_t bmControls; ///< See: audio20_cs_as_iso_data_ep_control_pos_t. + uint8_t bLockDelayUnits; ///< Indicates the units used for the wLockDelay field. See: audio20_cs_as_iso_data_ep_lock_delay_unit_t. + uint16_t wLockDelay; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. Units used depend on the value of the bLockDelayUnits field. } audio20_desc_cs_as_iso_data_ep_t; // 5.2.2 Control Request Layout -typedef struct TU_ATTR_PACKED -{ - union - { - struct TU_ATTR_PACKED - { - uint8_t recipient : 5; ///< Recipient type tusb_request_recipient_t. - uint8_t type : 2; ///< Request type tusb_request_type_t. - uint8_t direction : 1; ///< Direction type. tusb_dir_t - } bmRequestType_bit; - - uint8_t bmRequestType; - }; +typedef struct TU_ATTR_PACKED { + union { + struct TU_ATTR_PACKED { + uint8_t recipient : 5;///< Recipient type tusb_request_recipient_t. + uint8_t type : 2; ///< Request type tusb_request_type_t. + uint8_t direction : 1;///< Direction type. tusb_dir_t + } bmRequestType_bit; + + uint8_t bmRequestType; + }; - uint8_t bRequest; ///< Request type audio_cs_req_t - uint8_t bChannelNumber; - uint8_t bControlSelector; - union - { - uint8_t bInterface; - uint8_t bEndpoint; - }; - uint8_t bEntityID; - uint16_t wLength; + uint8_t bRequest;///< Request type audio_cs_req_t + uint8_t bChannelNumber; + uint8_t bControlSelector; + union { + uint8_t bInterface; + uint8_t bEndpoint; + }; + uint8_t bEntityID; + uint16_t wLength; } audio20_control_request_t; //// 5.2.3 Control Request Parameter Block Layout // 5.2.3.1 1-byte Control CUR Parameter Block -typedef struct TU_ATTR_PACKED -{ - int8_t bCur ; ///< The setting for the CUR attribute of the addressed Control +typedef struct TU_ATTR_PACKED { + int8_t bCur;///< The setting for the CUR attribute of the addressed Control } audio20_control_cur_1_t; // 5.2.3.2 2-byte Control CUR Parameter Block -typedef struct TU_ATTR_PACKED -{ - int16_t bCur ; ///< The setting for the CUR attribute of the addressed Control +typedef struct TU_ATTR_PACKED { + int16_t bCur;///< The setting for the CUR attribute of the addressed Control } audio20_control_cur_2_t; // 5.2.3.3 4-byte Control CUR Parameter Block -typedef struct TU_ATTR_PACKED -{ - int32_t bCur ; ///< The setting for the CUR attribute of the addressed Control +typedef struct TU_ATTR_PACKED { + int32_t bCur;///< The setting for the CUR attribute of the addressed Control } audio20_control_cur_4_t; // Use the following ONLY for RECEIVED data - compiler does not know how many subranges are defined! Use the #define macros below for predefined lengths. // 5.2.3.1 1-byte Control RANGE Parameter Block -#define audio20_control_range_1_n_t(numSubRanges) \ - struct TU_ATTR_PACKED { \ - uint16_t wNumSubRanges; \ - struct TU_ATTR_PACKED { \ - int8_t bMin ; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/\ - int8_t bMax ; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/\ - uint8_t bRes ; /*The setting for the RES attribute of the nth subrange of the addressed Control*/\ - } subrange[numSubRanges] ; \ -} +#define audio20_control_range_1_n_t(numSubRanges) \ + struct TU_ATTR_PACKED { \ + uint16_t wNumSubRanges; \ + struct TU_ATTR_PACKED { \ + int8_t bMin; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/ \ + int8_t bMax; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/ \ + uint8_t bRes; /*The setting for the RES attribute of the nth subrange of the addressed Control*/ \ + } subrange[numSubRanges]; \ + } /// 5.2.3.2 2-byte Control RANGE Parameter Block -#define audio20_control_range_2_n_t(numSubRanges) \ - struct TU_ATTR_PACKED { \ - uint16_t wNumSubRanges; \ - struct TU_ATTR_PACKED { \ - int16_t bMin ; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/\ - int16_t bMax ; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/\ - uint16_t bRes ; /*The setting for the RES attribute of the nth subrange of the addressed Control*/\ - } subrange[numSubRanges]; \ -} +#define audio20_control_range_2_n_t(numSubRanges) \ + struct TU_ATTR_PACKED { \ + uint16_t wNumSubRanges; \ + struct TU_ATTR_PACKED { \ + int16_t bMin; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/ \ + int16_t bMax; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/ \ + uint16_t bRes; /*The setting for the RES attribute of the nth subrange of the addressed Control*/ \ + } subrange[numSubRanges]; \ + } // 5.2.3.3 4-byte Control RANGE Parameter Block -#define audio20_control_range_4_n_t(numSubRanges) \ - struct TU_ATTR_PACKED { \ - uint16_t wNumSubRanges; \ - struct TU_ATTR_PACKED { \ - int32_t bMin ; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/\ - int32_t bMax ; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/\ - uint32_t bRes ; /*The setting for the RES attribute of the nth subrange of the addressed Control*/\ - } subrange[numSubRanges]; \ -} +#define audio20_control_range_4_n_t(numSubRanges) \ + struct TU_ATTR_PACKED { \ + uint16_t wNumSubRanges; \ + struct TU_ATTR_PACKED { \ + int32_t bMin; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/ \ + int32_t bMax; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/ \ + uint32_t bRes; /*The setting for the RES attribute of the nth subrange of the addressed Control*/ \ + } subrange[numSubRanges]; \ + } // 6.1 Interrupt Data Message Format -typedef struct TU_ATTR_PACKED -{ +typedef struct TU_ATTR_PACKED { uint8_t bInfo; uint8_t bAttribute; - union - { + union { uint16_t wValue; - struct - { + struct { uint8_t wValue_cn_or_mcn; uint8_t wValue_cs; }; }; - union - { + union { uint16_t wIndex; - struct - { + struct { uint8_t wIndex_ep_or_int; uint8_t wIndex_entity_id; }; }; } audio20_interrupt_data_t; +//--------------------------------------------------------------------+ +// APPLICATION HELPER DEFINITIONS +//--------------------------------------------------------------------+ + +// Combined Interrupt Data Message Format for both UAC1 and UAC2 +typedef union { + audio10_interrupt_data_t v1; + audio20_interrupt_data_t v2; +} audio_interrupt_data_t; + +// MIDI1.0 use the same CS AC Interface Descriptor as UAC1 +typedef audio10_desc_cs_ac_interface_n_t(1) midi10_desc_cs_ac_interface_t; + +// UAC1.0 AC Interface Descriptor with 1 interface, used to read fields other than baInterfaceNr +typedef audio10_desc_cs_ac_interface_n_t(1) audio10_desc_cs_ac_interface_1_t; + /** @} */ #ifdef __cplusplus diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index f795603c5..f56a27fd3 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -938,7 +938,7 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint } } } else if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL) { - if (tu_unaligned_read16(p_desc + 4) == AUDIO20_TERM_TYPE_USB_STREAMING) { + if (tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) { _audiod_fct[i].bclock_id_tx = p_desc[8]; } } @@ -1090,7 +1090,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p // Open new EP if necessary - EPs are only to be closed or opened for AS interfaces - Look for AS interface with correct alternate interface uint8_t const *p_desc = tu_desc_next(audio->p_desc); // Skip entire AC descriptor block - p_desc += ((audio_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; // Get pointer at end uint8_t const *p_desc_end = audio->p_desc + audio->desc_length - TUD_AUDIO_DESC_IAD_LEN; diff --git a/src/class/midi/midi_host.c b/src/class/midi/midi_host.c index 46b8284ee..8b78fe945 100644 --- a/src/class/midi/midi_host.c +++ b/src/class/midi/midi_host.c @@ -93,8 +93,6 @@ typedef struct { static midih_interface_t _midi_host[CFG_TUH_MIDI]; CFG_TUH_MEM_SECTION static midih_epbuf_t _midi_epbuf[CFG_TUH_MIDI]; -typedef audio10_desc_cs_ac_interface_n_t(1) midi10_desc_cs_ac_interface_t; - //--------------------------------------------------------------------+ // Helper //--------------------------------------------------------------------+ @@ -226,7 +224,7 @@ bool midih_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *d p_desc = tu_desc_next(p_desc); TU_VERIFY(tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && - tu_desc_subtype(p_desc) == AUDIO_CS_AC_INTERFACE_HEADER); + tu_desc_subtype(p_desc) == AUDIO10_CS_AC_INTERFACE_HEADER); desc_cb.desc_audio_control = desc_itf; p_desc = tu_desc_next(p_desc); diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 9c4699362..a9997ad3f 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -45,6 +45,13 @@ #define U16_TO_U8S_BE(_u16) TU_U16_HIGH(_u16), TU_U16_LOW(_u16) #define U16_TO_U8S_LE(_u16) TU_U16_LOW(_u16), TU_U16_HIGH(_u16) +#define TU_U24(_high, _mid, _low) ((uint32_t) (((_high) << 16) | ((_mid) << 8) | (_low))) +#define TU_U24_HIGH(_u24) ((uint8_t) (((_u24) >> 16) & 0x0000ff)) +#define TU_U24_MID(_u24) ((uint8_t) (((_u24) >> 8) & 0x0000ff)) +#define TU_U24_LOW(_u24) ((uint8_t) (((_u24) ) & 0x0000ff)) +#define U24_TO_U8S_BE(_u24) TU_U24_HIGH(_u24), TU_U24_MID(_u24), TU_U24_LOW(_u24) +#define U24_TO_U8S_LE(_u24) TU_U24_LOW(_u24), TU_U24_MID(_u24), TU_U24_HIGH(_u24) + #define TU_U32_BYTE3(_u32) ((uint8_t) ((((uint32_t) _u32) >> 24) & 0x000000ff)) // MSB #define TU_U32_BYTE2(_u32) ((uint8_t) ((((uint32_t) _u32) >> 16) & 0x000000ff)) #define TU_U32_BYTE1(_u32) ((uint8_t) ((((uint32_t) _u32) >> 8) & 0x000000ff)) diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 9b33a6f61..b0dae6488 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -118,6 +118,18 @@ #define _TU_ARGS_APPLY_7(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1) _s _TU_ARGS_APPLY_6(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7) #define _TU_ARGS_APPLY_8(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1) _s _TU_ARGS_APPLY_7(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7, _a8) +// Apply an macro X to each of the arguments and expand the result wtih comma +#define TU_ARGS_APPLY_EXPAND(_X, ...) TU_XSTRCAT(_TU_ARGS_APPLY_EXPAND_, TU_ARGS_NUM(__VA_ARGS__))(_X, __VA_ARGS__) + +#define _TU_ARGS_APPLY_EXPAND_1(_X, _a1) _X(_a1) +#define _TU_ARGS_APPLY_EXPAND_2(_X, _a1, _a2) _X(_a1), _X(_a2) +#define _TU_ARGS_APPLY_EXPAND_3(_X, _a1, _a2, _a3) _X(_a1), _TU_ARGS_APPLY_EXPAND_2(_X, _a2, _a3) +#define _TU_ARGS_APPLY_EXPAND_4(_X, _a1, _a2, _a3, _a4) _X(_a1), _TU_ARGS_APPLY_EXPAND_3(_X, _a2, _a3, _a4) +#define _TU_ARGS_APPLY_EXPAND_5(_X, _a1, _a2, _a3, _a4, _a5) _X(_a1), _TU_ARGS_APPLY_EXPAND_4(_X, _a2, _a3, _a4, _a5) +#define _TU_ARGS_APPLY_EXPAND_6(_X, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1), _TU_ARGS_APPLY_EXPAND_5(_X, _a2, _a3, _a4, _a5, _a6) +#define _TU_ARGS_APPLY_EXPAND_7(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1), _TU_ARGS_APPLY_EXPAND_6(_X, _a2, _a3, _a4, _a5, _a6, _a7) +#define _TU_ARGS_APPLY_EXPAND_8(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1), _TU_ARGS_APPLY_EXPAND_7(_X, _a2, _a3, _a4, _a5, _a6, _a7, _a8) + //--------------------------------------------------------------------+ // Macro for function default arguments //--------------------------------------------------------------------+ diff --git a/src/device/usbd.h b/src/device/usbd.h index 3e97a3482..3ed1015b6 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -364,238 +364,343 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ TUD_MIDI_JACKID_OUT_EMB(1) //--------------------------------------------------------------------+ -// Audio v2.0 Descriptor Templates -//--------------------------------------------------------------------+ +// Audio Descriptor Templates +//--------------------------------------------------------------------+ + + +/* Audio v1.0 Descriptor Templates */ + +/* Standard AC Interface Descriptor UAC1 (4.3.1) */ +#define TUD_AUDIO10_DESC_STD_AC_LEN 9 +#define TUD_AUDIO10_DESC_STD_AC(_itfnum, _nEPs, _stridx) \ + TUD_AUDIO10_DESC_STD_AC_LEN, TUSB_DESC_INTERFACE, _itfnum, 0x00, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_CONTROL, AUDIO_INT_PROTOCOL_CODE_V1, _stridx + +/* Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) */ +#define TUD_AUDIO10_DESC_CS_AC_LEN(_nintfs) (8 + (_nintfs)) +// Class-Specific AC Interface Header descriptor, take list of streaming interface numbers as variable arguments +#define TUD_AUDIO10_DESC_CS_AC(_bcdADC, _totallen, ...) \ + TUD_AUDIO10_DESC_CS_AC_LEN(TU_ARGS_NUM(__VA_ARGS__)), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(_bcdADC), U16_TO_U8S_LE(_totallen + TUD_AUDIO10_DESC_CS_AC_LEN(TU_ARGS_NUM(__VA_ARGS__))), TU_ARGS_NUM(__VA_ARGS__), __VA_ARGS__ + +/* Input Terminal Descriptor UAC1 (4.3.2.1) */ +#define TUD_AUDIO10_DESC_INPUT_TERM_LEN 12 +#define TUD_AUDIO10_DESC_INPUT_TERM(_termid, _termtype, _assocTerm, _nchannels, _channelcfg, _idxchannelnames, _stridx) \ + TUD_AUDIO10_DESC_INPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _nchannels, U16_TO_U8S_LE(_channelcfg), _idxchannelnames, _stridx + +/* Output Terminal Descriptor UAC1 (4.3.2.2) */ +#define TUD_AUDIO10_DESC_OUTPUT_TERM_LEN 9 +#define TUD_AUDIO10_DESC_OUTPUT_TERM(_termid, _termtype, _assocTerm, _srcid, _stridx) \ + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _stridx + +/* Mixer Unit Descriptor UAC1 (4.3.2.3) - One Input Pin */ +#define TUD_AUDIO10_DESC_MIXER_UNIT_ONE_PIN_LEN(_ctrlsize) (11 + (_ctrlsize)) +#define TUD_AUDIO10_DESC_MIXER_UNIT_ONE_PIN(_unitid, _srcid, _nrchannels, _channelcfg, _idxchannelnames, _ctrlsize, _stridx, ...) \ + TUD_AUDIO10_DESC_MIXER_UNIT_ONE_PIN_LEN(_ctrlsize), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_MIXER_UNIT, _unitid, 1, _srcid, _nrchannels, U16_TO_U8S_LE(_channelcfg), _idxchannelnames, __VA_ARGS__, _stridx + +/* Selector Unit Descriptor UAC1 (4.3.2.4) - One Input Pin */ +#define TUD_AUDIO10_DESC_SELECTOR_UNIT_ONE_PIN_LEN 7 +#define TUD_AUDIO10_DESC_SELECTOR_UNIT_ONE_PIN(_unitid, _srcid, _stridx) \ + TUD_AUDIO10_DESC_SELECTOR_UNIT_ONE_PIN_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT, _unitid, 1, _srcid, _stridx + +/* Feature Unit Descriptor UAC1 (4.3.2.5) - Variable Channels */ +#define TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(_nchannels) (7 + (_nchannels + 1) * 2) +// Feature Unit descriptor, take list of control bitmaps for master channel + each channel as variable arguments +#define TUD_AUDIO10_DESC_FEATURE_UNIT(_unitid, _srcid, _stridx, ...) \ + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(TU_ARGS_NUM(__VA_ARGS__) - 1), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, 2, TU_ARGS_APPLY_EXPAND(U16_TO_U8S_LE, __VA_ARGS__), _stridx + +/* Standard AS Interface Descriptor UAC1 (4.5.1) */ +#define TUD_AUDIO10_DESC_STD_AS_LEN 9 +#define TUD_AUDIO10_DESC_STD_AS_INT(_itfnum, _altset, _nEPs, _stridx) \ + TUD_AUDIO10_DESC_STD_AS_LEN, TUSB_DESC_INTERFACE, _itfnum, _altset, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_STREAMING, AUDIO_INT_PROTOCOL_CODE_V1, _stridx + +/* Class-Specific AS Interface Descriptor UAC1 (4.5.2) */ +#define TUD_AUDIO10_DESC_CS_AS_INT_LEN 7 +#define TUD_AUDIO10_DESC_CS_AS_INT(_termid, _delay, _formattype) \ + TUD_AUDIO10_DESC_CS_AS_INT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AS_INTERFACE_AS_GENERAL, _termid, _delay, U16_TO_U8S_LE(_formattype) + +/* Type I Format Type Descriptor UAC1 (2.2.5) */ +#define TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs) (8 + (_nfreqs)*3) +// Type I Format descriptor, take list of sample rates in Hz as variable arguments +#define TUD_AUDIO10_DESC_TYPE_I_FORMAT(_nrchannels, _subframesize, _bitresolution, ...) \ + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(TU_ARGS_NUM(__VA_ARGS__)), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE, AUDIO10_FORMAT_TYPE_I, _nrchannels, _subframesize, _bitresolution, TU_ARGS_NUM(__VA_ARGS__), TU_ARGS_APPLY_EXPAND(U24_TO_U8S_LE, __VA_ARGS__) + +/* Standard AS Isochronous Audio Data Endpoint Descriptor UAC1 (4.6.1.1) */ +#define TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN 9 +#define TUD_AUDIO10_DESC_STD_AS_ISO_EP(_ep, _attr, _maxEPsize, _interval, _sync_ep) \ + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN, TUSB_DESC_ENDPOINT, _ep, _attr, U16_TO_U8S_LE(_maxEPsize), _interval, 0x00, _sync_ep + +/* Class-Specific AS Isochronous Audio Data Endpoint Descriptor UAC1 (4.6.1.2) */ +#define TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN 7 +#define TUD_AUDIO10_DESC_CS_AS_ISO_EP(_attr, _lockdelayunits, _lockdelay) \ + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO10_CS_EP_SUBTYPE_GENERAL, _attr, _lockdelayunits, U16_TO_U8S_LE(_lockdelay) + +/* Standard AC Interrupt Endpoint Descriptor UAC1 (4.4.2) */ +#define TUD_AUDIO10_DESC_STD_AC_INT_EP_LEN 9 +#define TUD_AUDIO10_DESC_STD_AC_INT_EP(_ep, _interval) \ + TUD_AUDIO10_DESC_STD_AC_INT_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(2), _interval, 0x00, 0x00 + +// AUDIO simple descriptor templates for UAC1 + +// AUDIO simple descriptor (UAC1) for 1 microphone input +// - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal + +#define TUD_AUDIO10_MIC_ONE_CH_DESC_LEN (\ + + TUD_AUDIO10_DESC_STD_AC_LEN\ + + TUD_AUDIO10_DESC_CS_AC_LEN(1)\ + + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1)\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN) + +#define TUD_AUDIO10_MIC_ONE_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize, ...) \ + /* Standard AC Interface Descriptor(4.3.1) */\ + TUD_AUDIO10_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + /* Class-Specific AC Interface Header Descriptor(4.3.2) */\ + TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1), /*_itf*/ ((_itfnum)+1)),\ + /* Input Terminal Descriptor(4.3.2.1) */\ + TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_nchannels*/ 0x01, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ + /* Output Terminal Descriptor(4.3.2.2) */\ + TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_stridx*/ 0x00),\ + /* Feature Unit Descriptor(4.3.2.5) */\ + TUD_AUDIO10_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlmaster*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch1*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME)),\ + /* Standard AS Interface Descriptor(4.5.1) */\ + /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + /* Standard AS Interface Descriptor(4.5.1) */\ + /* Interface 1, Alternate 1 - alternate interface for data streaming */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + /* Class-Specific AS Interface Descriptor(4.5.2) */\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_delay*/ 0x00, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + /* Type I Format Type Descriptor(2.2.5) */\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freqtype*/ 0x01, /*_freq*/ _freq),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01, /* _sync_ep */ 0x00),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) + +/* Audio v2.0 Descriptor Templates */ /* Standard Interface Association Descriptor (IAD) */ -#define TUD_AUDIO_DESC_IAD_LEN 8 -#define TUD_AUDIO_DESC_IAD(_firstitf, _nitfs, _stridx) \ - TUD_AUDIO_DESC_IAD_LEN, TUSB_DESC_INTERFACE_ASSOCIATION, _firstitf, _nitfs, TUSB_CLASS_AUDIO, AUDIO_FUNCTION_SUBCLASS_UNDEFINED, AUDIO_FUNC_PROTOCOL_CODE_V2, _stridx +#define TUD_AUDIO20_DESC_IAD_LEN 8 +#define TUD_AUDIO20_DESC_IAD(_firstitf, _nitfs, _stridx) \ + TUD_AUDIO20_DESC_IAD_LEN, TUSB_DESC_INTERFACE_ASSOCIATION, _firstitf, _nitfs, TUSB_CLASS_AUDIO, AUDIO_FUNCTION_SUBCLASS_UNDEFINED, AUDIO_FUNC_PROTOCOL_CODE_V2, _stridx /* Standard AC Interface Descriptor(4.7.1) */ -#define TUD_AUDIO_DESC_STD_AC_LEN 9 -#define TUD_AUDIO_DESC_STD_AC(_itfnum, _nEPs, _stridx) /* _nEPs is 0 or 1 */\ - TUD_AUDIO_DESC_STD_AC_LEN, TUSB_DESC_INTERFACE, _itfnum, /* fixed to zero */ 0x00, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_CONTROL, AUDIO_INT_PROTOCOL_CODE_V2, _stridx +#define TUD_AUDIO20_DESC_STD_AC_LEN 9 +#define TUD_AUDIO20_DESC_STD_AC(_itfnum, _nEPs, _stridx) /* _nEPs is 0 or 1 */\ + TUD_AUDIO20_DESC_STD_AC_LEN, TUSB_DESC_INTERFACE, _itfnum, /* fixed to zero */ 0x00, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_CONTROL, AUDIO_INT_PROTOCOL_CODE_V2, _stridx /* Class-Specific AC Interface Header Descriptor(4.7.2) */ -#define TUD_AUDIO_DESC_CS_AC_LEN 9 -#define TUD_AUDIO_DESC_CS_AC(_bcdADC, _category, _totallen, _ctrl) /* _bcdADC : Audio Device Class Specification Release Number in Binary-Coded Decimal, _category : see audio20_function_t, _totallen : Total number of bytes returned for the class-specific AudioControl interface i.e. Clock Source, Unit and Terminal descriptors - Do not include TUD_AUDIO_DESC_CS_AC_LEN, we already do this here*/ \ - TUD_AUDIO_DESC_CS_AC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(_bcdADC), _category, U16_TO_U8S_LE(_totallen + TUD_AUDIO_DESC_CS_AC_LEN), _ctrl +#define TUD_AUDIO20_DESC_CS_AC_LEN 9 +#define TUD_AUDIO20_DESC_CS_AC(_bcdADC, _category, _totallen, _ctrl) /* _bcdADC : Audio Device Class Specification Release Number in Binary-Coded Decimal, _category : see audio20_function_t, _totallen : Total number of bytes returned for the class-specific AudioControl interface i.e. Clock Source, Unit and Terminal descriptors - Do not include TUD_AUDIO20_DESC_CS_AC_LEN, we already do this here*/ \ + TUD_AUDIO20_DESC_CS_AC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(_bcdADC), _category, U16_TO_U8S_LE(_totallen + TUD_AUDIO20_DESC_CS_AC_LEN), _ctrl /* Clock Source Descriptor(4.7.2.1) */ -#define TUD_AUDIO_DESC_CLK_SRC_LEN 8 -#define TUD_AUDIO_DESC_CLK_SRC(_clkid, _attr, _ctrl, _assocTerm, _stridx) \ - TUD_AUDIO_DESC_CLK_SRC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE, _clkid, _attr, _ctrl, _assocTerm, _stridx +#define TUD_AUDIO20_DESC_CLK_SRC_LEN 8 +#define TUD_AUDIO20_DESC_CLK_SRC(_clkid, _attr, _ctrl, _assocTerm, _stridx) \ + TUD_AUDIO20_DESC_CLK_SRC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE, _clkid, _attr, _ctrl, _assocTerm, _stridx /* Input Terminal Descriptor(4.7.2.4) */ -#define TUD_AUDIO_DESC_INPUT_TERM_LEN 17 -#define TUD_AUDIO_DESC_INPUT_TERM(_termid, _termtype, _assocTerm, _clkid, _nchannelslogical, _channelcfg, _idxchannelnames, _ctrl, _stridx) \ - TUD_AUDIO_DESC_INPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _clkid, _nchannelslogical, U32_TO_U8S_LE(_channelcfg), _idxchannelnames, U16_TO_U8S_LE(_ctrl), _stridx +#define TUD_AUDIO20_DESC_INPUT_TERM_LEN 17 +#define TUD_AUDIO20_DESC_INPUT_TERM(_termid, _termtype, _assocTerm, _clkid, _nchannelslogical, _channelcfg, _idxchannelnames, _ctrl, _stridx) \ + TUD_AUDIO20_DESC_INPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _clkid, _nchannelslogical, U32_TO_U8S_LE(_channelcfg), _idxchannelnames, U16_TO_U8S_LE(_ctrl), _stridx /* Output Terminal Descriptor(4.7.2.5) */ -#define TUD_AUDIO_DESC_OUTPUT_TERM_LEN 12 -#define TUD_AUDIO_DESC_OUTPUT_TERM(_termid, _termtype, _assocTerm, _srcid, _clkid, _ctrl, _stridx) \ - TUD_AUDIO_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _clkid, U16_TO_U8S_LE(_ctrl), _stridx +#define TUD_AUDIO20_DESC_OUTPUT_TERM_LEN 12 +#define TUD_AUDIO20_DESC_OUTPUT_TERM(_termid, _termtype, _assocTerm, _srcid, _clkid, _ctrl, _stridx) \ + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _clkid, U16_TO_U8S_LE(_ctrl), _stridx /* Feature Unit Descriptor(4.7.2.8) */ -// 1 - Channel -#define TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN 6+(1+1)*4 -#define TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(_unitid, _srcid, _ctrlch0master, _ctrlch1, _stridx) \ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), _stridx - -// 2 - Channels -#define TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN (6+(2+1)*4) -#define TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(_unitid, _srcid, _ctrlch0master, _ctrlch1, _ctrlch2, _stridx) \ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), U32_TO_U8S_LE(_ctrlch2), _stridx -// 4 - Channels -#define TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN (6+(4+1)*4) -#define TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL(_unitid, _srcid, _ctrlch0master, _ctrlch1, _ctrlch2, _ctrlch3, _ctrlch4, _stridx) \ - TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), U32_TO_U8S_LE(_ctrlch2), U32_TO_U8S_LE(_ctrlch3), U32_TO_U8S_LE(_ctrlch4), _stridx - -// For more channels, add definitions here +#define TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(_nchannels) (6 + (_nchannels + 1) * 4) +#define TUD_AUDIO20_DESC_FEATURE_UNIT(_unitid, _srcid, _stridx, ...) \ + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(TU_ARGS_NUM(__VA_ARGS__) - 1), TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, TU_ARGS_APPLY_EXPAND(U32_TO_U8S_LE, __VA_ARGS__), _stridx /* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */ -#define TUD_AUDIO_DESC_STD_AC_INT_EP_LEN 7 -#define TUD_AUDIO_DESC_STD_AC_INT_EP(_ep, _interval) \ - TUD_AUDIO_DESC_STD_AC_INT_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(6), _interval +#define TUD_AUDIO20_DESC_STD_AC_INT_EP_LEN 7 +#define TUD_AUDIO20_DESC_STD_AC_INT_EP(_ep, _interval) \ + TUD_AUDIO20_DESC_STD_AC_INT_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(6), _interval /* Standard AS Interface Descriptor(4.9.1) */ -#define TUD_AUDIO_DESC_STD_AS_INT_LEN 9 -#define TUD_AUDIO_DESC_STD_AS_INT(_itfnum, _altset, _nEPs, _stridx) \ - TUD_AUDIO_DESC_STD_AS_INT_LEN, TUSB_DESC_INTERFACE, _itfnum, _altset, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_STREAMING, AUDIO_INT_PROTOCOL_CODE_V2, _stridx +#define TUD_AUDIO20_DESC_STD_AS_LEN 9 +#define TUD_AUDIO20_DESC_STD_AS_INT(_itfnum, _altset, _nEPs, _stridx) \ + TUD_AUDIO20_DESC_STD_AS_LEN, TUSB_DESC_INTERFACE, _itfnum, _altset, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_STREAMING, AUDIO_INT_PROTOCOL_CODE_V2, _stridx /* Class-Specific AS Interface Descriptor(4.9.2) */ -#define TUD_AUDIO_DESC_CS_AS_INT_LEN 16 -#define TUD_AUDIO_DESC_CS_AS_INT(_termid, _ctrl, _formattype, _formats, _nchannelsphysical, _channelcfg, _stridx) \ - TUD_AUDIO_DESC_CS_AS_INT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_AS_GENERAL, _termid, _ctrl, _formattype, U32_TO_U8S_LE(_formats), _nchannelsphysical, U32_TO_U8S_LE(_channelcfg), _stridx +#define TUD_AUDIO20_DESC_CS_AS_INT_LEN 16 +#define TUD_AUDIO20_DESC_CS_AS_INT(_termid, _ctrl, _formattype, _formats, _nchannelsphysical, _channelcfg, _stridx) \ + TUD_AUDIO20_DESC_CS_AS_INT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_AS_GENERAL, _termid, _ctrl, _formattype, U32_TO_U8S_LE(_formats), _nchannelsphysical, U32_TO_U8S_LE(_channelcfg), _stridx /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */ -#define TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN 6 -#define TUD_AUDIO_DESC_TYPE_I_FORMAT(_subslotsize, _bitresolution) /* _subslotsize is number of bytes per sample (i.e. subslot) and can be 1,2,3, or 4 */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE, AUDIO20_FORMAT_TYPE_I, _subslotsize, _bitresolution +#define TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN 6 +#define TUD_AUDIO20_DESC_TYPE_I_FORMAT(_subslotsize, _bitresolution) /* _subslotsize is number of bytes per sample (i.e. subslot) and can be 1,2,3, or 4 */\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE, AUDIO20_FORMAT_TYPE_I, _subslotsize, _bitresolution /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */ -#define TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN 7 -#define TUD_AUDIO_DESC_STD_AS_ISO_EP(_ep, _attr, _maxEPsize, _interval) \ - TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN, TUSB_DESC_ENDPOINT, _ep, _attr, U16_TO_U8S_LE(_maxEPsize), _interval +#define TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN 7 +#define TUD_AUDIO20_DESC_STD_AS_ISO_EP(_ep, _attr, _maxEPsize, _interval) \ + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN, TUSB_DESC_ENDPOINT, _ep, _attr, U16_TO_U8S_LE(_maxEPsize), _interval /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */ -#define TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN 8 -#define TUD_AUDIO_DESC_CS_AS_ISO_EP(_attr, _ctrl, _lockdelayunit, _lockdelay) \ - TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO20_CS_EP_SUBTYPE_GENERAL, _attr, _ctrl, _lockdelayunit, U16_TO_U8S_LE(_lockdelay) +#define TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN 8 +#define TUD_AUDIO20_DESC_CS_AS_ISO_EP(_attr, _ctrl, _lockdelayunit, _lockdelay) \ + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO20_CS_EP_SUBTYPE_GENERAL, _attr, _ctrl, _lockdelayunit, U16_TO_U8S_LE(_lockdelay) /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */ -#define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN 7 -#define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(_ep, _epsize, _interval) \ - TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_NO_SYNC | (uint8_t)TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(_epsize), _interval +#define TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP_LEN 7 +#define TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP(_ep, _epsize, _interval) \ + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_NO_SYNC | (uint8_t)TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(_epsize), _interval // AUDIO simple descriptor (UAC2) for 1 microphone input // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal, 1 Clock Source -#define TUD_AUDIO_MIC_ONE_CH_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) - -#define TUD_AUDIO_MIC_ONE_CH_DESC_N_AS_INT 1 // Number of AS interfaces - -#define TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ +#define TUD_AUDIO20_MIC_ONE_CH_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) + +#define TUD_AUDIO20_MIC_ONE_CH_DESC_N_AS_INT 1 // Number of AS interfaces + +#define TUD_AUDIO20_MIC_ONE_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) // AUDIO simple descriptor (UAC2) for 4 microphone input // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal, 1 Clock Source -#define TUD_AUDIO_MIC_FOUR_CH_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) - -#define TUD_AUDIO_MIC_FOUR_CH_DESC_N_AS_INT 1 // Number of AS interfaces - -#define TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ +#define TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(4)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) + +#define TUD_AUDIO20_MIC_FOUR_CH_DESC_N_AS_INT 1 // Number of AS interfaces + +#define TUD_AUDIO20_MIC_FOUR_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(4), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch3*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch4*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch3*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch4*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) // AUDIO simple descriptor (UAC2) for mono speaker // - 1 Input Terminal, 2 Feature Unit (Mute and Volume Control), 3 Output Terminal, 4 Clock Source -#define TUD_AUDIO_SPEAKER_MONO_FB_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN) - -#define TUD_AUDIO_SPEAKER_MONO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, _epfbsize) \ +#define TUD_AUDIO20_SPEAKER_MONO_FB_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP_LEN) + +#define TUD_AUDIO20_SPEAKER_MONO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, _epfbsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ 1) + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ 1) // Calculate wMaxPacketSize of Endpoints #define TUD_AUDIO_EP_SIZE(_maxFrequency, _nBytesPerSample, _nChannels) \ -- cgit v1.3.1 From 289680a6b99e323b948187c62be3e942af2ebbdf Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 28 Sep 2025 23:20:32 +0200 Subject: Add basic UAC1 support Signed-off-by: HiFiPhile --- .../device/audio_4_channel_mic/src/tusb_config.h | 2 - .../audio_4_channel_mic_freertos/src/tusb_config.h | 2 - examples/device/audio_test/src/tusb_config.h | 1 - .../device/audio_test_freertos/src/tusb_config.h | 1 - .../device/audio_test_multi_rate/src/tusb_config.h | 1 - examples/device/cdc_uac2/src/tusb_config.h | 2 - examples/device/uac2_headset/src/tusb_config.h | 2 - examples/device/uac2_speaker_fb/src/tusb_config.h | 2 - src/class/audio/audio.h | 32 +-- src/class/audio/audio_device.c | 309 +++++++++++++-------- src/class/audio/audio_device.h | 26 +- src/device/usbd.h | 8 +- 12 files changed, 226 insertions(+), 162 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 718486941..a1b3a1050 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -105,8 +105,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN - #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 7a9a40c49..7aaf7ffa0 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -111,8 +111,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN - #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 8a63cc521..9ef53e39d 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -108,7 +108,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index 21b6a6f76..343bebc96 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -114,7 +114,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index e92d20c49..e68005375 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -122,7 +122,6 @@ extern "C" { // Have a look into audio_device.h for all configurations -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index 2e744f8d2..43949186f 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -105,8 +105,6 @@ extern "C" { // AUDIO CLASS DRIVER CONFIGURATION //-------------------------------------------------------------------- -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_HEADSET_STEREO_DESC_LEN - // How many formats are used, need to adjust USB descriptor if changed #define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index e9165163b..c6d00d4fb 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -108,8 +108,6 @@ extern "C" { // Allow volume controlled by on-baord button #define CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP 1 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_HEADSET_STEREO_DESC_LEN - // How many formats are used, need to adjust USB descriptor if changed #define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 diff --git a/examples/device/uac2_speaker_fb/src/tusb_config.h b/examples/device/uac2_speaker_fb/src/tusb_config.h index 284feff55..3bf082096 100644 --- a/examples/device/uac2_speaker_fb/src/tusb_config.h +++ b/examples/device/uac2_speaker_fb/src/tusb_config.h @@ -128,8 +128,6 @@ extern "C" { // AUDIO CLASS DRIVER CONFIGURATION //-------------------------------------------------------------------- -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN - // Can be enabled with Full-Speed device on OSX, which forces feedback EP size to 3, in this case CFG_QUIRK_OS_GUESSING can be disabled #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION 0 diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index ecc7b9427..1ab0739b5 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -314,21 +314,21 @@ typedef enum { } audio10_channel_config_t; - //--------------------------------------------------------------------+ - // USB AUDIO CLASS 1.0 (UAC1) DESCRIPTORS - //--------------------------------------------------------------------+ - - /// AUDIO Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) - #define audio10_desc_cs_ac_interface_n_t(numInterfaces) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength; /* Size of this descriptor in bytes: 8+n. */ \ - uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ - uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_HEADER. */ \ - uint16_t bcdADC; /* Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: 0x0100 for UAC1. */ \ - uint16_t wTotalLength; /* Total number of bytes returned for the class-specific AudioControl interface descriptor. */ \ - uint8_t bInCollection; /* The number of AudioStreaming and MIDIStreaming interfaces in the Audio Interface Collection. */ \ - uint8_t baInterfaceNr[numInterfaces]; /* Interface number of the AudioStreaming or MIDIStreaming interface in the Collection. */ \ - } +//--------------------------------------------------------------------+ +// USB AUDIO CLASS 1.0 (UAC1) DESCRIPTORS +//--------------------------------------------------------------------+ + +/// AUDIO Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) +#define audio10_desc_cs_ac_interface_n_t(numInterfaces) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 8+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_HEADER. */ \ + uint16_t bcdADC; /* Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: 0x0100 for UAC1. */ \ + uint16_t wTotalLength; /* Total number of bytes returned for the class-specific AudioControl interface descriptor. */ \ + uint8_t bInCollection; /* The number of AudioStreaming and MIDIStreaming interfaces in the Audio Interface Collection. */ \ + uint8_t baInterfaceNr[numInterfaces]; /* Interface number of the AudioStreaming or MIDIStreaming interface in the Collection. */ \ + } /// AUDIO Input Terminal Descriptor UAC1 (4.3.2.1) typedef struct TU_ATTR_PACKED { @@ -1014,7 +1014,7 @@ typedef enum { /// AUDIO Channel Cluster Descriptor UAC2 (4.1) typedef struct TU_ATTR_PACKED { uint8_t bNrChannels; ///< Number of channels currently connected. - audio20_channel_config_t bmChannelConfig;///< Bitmap according to 'audio20_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. + uint32_t bmChannelConfig;///< Bitmap according to 'audio20_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first inserted channel with a non-predefined spatial location. } audio20_desc_channel_cluster_t; diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index f56a27fd3..c56752536 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -283,7 +283,7 @@ typedef struct // Encoding parameters - parameters are set when alternate AS interface is set by host #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - audio20_format_type_t format_type_tx; + uint8_t format_type_tx; uint8_t n_channels_tx; uint8_t n_bytes_per_sample_tx; #endif @@ -595,9 +595,13 @@ static bool audiod_tx_xfer_isr(uint8_t rhport, audiod_function_t * audio, uint16 #endif +//--------------------------------------------------------------------+ +// OTHER API +//--------------------------------------------------------------------+ + #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP // If no interrupt transmit is pending bytes get written into buffer and a transmit is scheduled - once transmit completed tud_audio_int_done_cb() is called in inform user -bool tud_audio_int_n_write(uint8_t func_id, const audio20_interrupt_data_t *data) { +bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); TU_VERIFY(_audiod_fct[func_id].ep_int != 0); @@ -605,10 +609,15 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio20_interrupt_data_t *data // We write directly into the EP's buffer - abort if previous transfer not complete TU_VERIFY(usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int)); + uint8_t size = tud_audio_n_version(func_id) == 2 ? sizeof(audio20_interrupt_data_t) : sizeof(audio10_interrupt_data_t); + + // INT EP buffer must be large enough + TU_ASSERT(size <= sizeof(int_ep_buf[func_id].buf)); + // Check length - if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, sizeof(audio20_interrupt_data_t)) == 0) { + if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, size) == 0) { // Schedule transmit - TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf)), 0); + TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, size), 0); } else { // Release endpoint since we don't make any transfer usbd_edpt_release(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int); @@ -650,8 +659,64 @@ static inline bool audiod_fb_send(audiod_function_t *audio) { // We send 3 bytes since sending packet larger than wMaxPacketSize is pretty ugly return usbd_edpt_xfer(audio->rhport, audio->ep_fb, (uint8_t *) audio->fb_buf, apply_correction ? 3 : 4); } + +uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) { + audiod_function_t *audio = &_audiod_fct[func_id]; + uint32_t feedback; + + switch (audio->feedback.compute_method) { + case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: + feedback = (cycles << audio->feedback.compute.power_of_2); + break; + + case AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT: + feedback = (uint32_t) ((float) cycles * audio->feedback.compute.float_const); + break; + + case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: { + uint64_t fb64 = (((uint64_t) cycles) * audio->feedback.compute.fixed.sample_freq) << (16 - (audio->feedback.frame_shift - 1)); + feedback = (uint32_t) (fb64 / audio->feedback.compute.fixed.mclk_freq); + } break; + + default: + return 0; + } + + // For Windows: https://docs.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers + // The size of isochronous packets created by the device must be within the limits specified in FMT-2.0 section 2.3.1.1. + // This means that the deviation of actual packet size from nominal size must not exceed +/- one audio slot + // (audio slot = channel count samples). + if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; + if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; + + tud_audio_n_fb_set(func_id, feedback); + + return feedback; +} + +bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback) { + TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); + + _audiod_fct[func_id].feedback.value = feedback; + + return true; +} #endif +uint8_t tud_audio_n_version(uint8_t func_id) { + TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); + + uint8_t bIntfProtocol = ((tusb_desc_interface_t const *)_audiod_fct[func_id].p_desc)->bInterfaceProtocol; + + if (bIntfProtocol == AUDIO_INT_PROTOCOL_CODE_V1) { + return 1; + } else if (bIntfProtocol == AUDIO_INT_PROTOCOL_CODE_V2) { + return 2; + } else { + return 0; // Unknown version + } +} + //--------------------------------------------------------------------+ // USBD Driver API //--------------------------------------------------------------------+ @@ -817,7 +882,8 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint AUDIO_SUBCLASS_CONTROL == itf_desc->bInterfaceSubClass); // Verify version is correct - this check can be omitted - TU_VERIFY(itf_desc->bInterfaceProtocol == AUDIO_INT_PROTOCOL_CODE_V2); + TU_VERIFY(itf_desc->bInterfaceProtocol == AUDIO_INT_PROTOCOL_CODE_V1 || + itf_desc->bInterfaceProtocol == AUDIO_INT_PROTOCOL_CODE_V2); // Verify interrupt control EP is enabled if demanded by descriptor TU_ASSERT(itf_desc->bNumEndpoints <= 1);// 0 or 1 EPs are allowed @@ -835,21 +901,25 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint _audiod_fct[i].p_desc = (uint8_t const *) itf_desc;// Save pointer to AC descriptor which is by specification always the first one _audiod_fct[i].rhport = rhport; - // Setup descriptor lengths - switch (i) { - case 0: - _audiod_fct[i].desc_length = CFG_TUD_AUDIO_FUNC_1_DESC_LEN; - break; -#if CFG_TUD_AUDIO > 1 - case 1: - _audiod_fct[i].desc_length = CFG_TUD_AUDIO_FUNC_2_DESC_LEN; - break; -#endif -#if CFG_TUD_AUDIO > 2 - case 2: - _audiod_fct[i].desc_length = CFG_TUD_AUDIO_FUNC_3_DESC_LEN; - break; -#endif + // Calculate descriptor length + { + uint8_t const *p_desc = (uint8_t const *) itf_desc; + uint8_t const *p_desc_end = p_desc + max_len; + uint16_t total_len = sizeof(tusb_desc_interface_t); + // Skip Standard AC interface descriptor + p_desc = tu_desc_next(p_desc); + while (p_desc_end - p_desc > 0) { + // Stop if: + // - Non audio streaming interface descriptor found + // - IAD found + if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass != AUDIO_SUBCLASS_STREAMING) + || tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { + break; + } + total_len += p_desc[0]; + p_desc = tu_desc_next(p_desc); + } + _audiod_fct[i].desc_length = total_len; } #ifdef TUP_DCD_EDPT_ISO_ALLOC @@ -868,34 +938,58 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint uint8_t ep_fb = 0; #endif uint8_t const *p_desc = _audiod_fct[i].p_desc; - uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { - tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; - if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - // Explicit feedback EP - if (desc_ep->bmAttributes.usage == 1) { - ep_fb = desc_ep->bEndpointAddress; - } - #endif - #if CFG_TUD_AUDIO_ENABLE_EP_IN - // Data or data with implicit feedback IN EP - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN - && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { - ep_in = desc_ep->bEndpointAddress; - ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); - } - #endif - #if CFG_TUD_AUDIO_ENABLE_EP_OUT - // Data OUT EP - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT - && desc_ep->bmAttributes.usage == 0) { - ep_out = desc_ep->bEndpointAddress; - ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); - } - #endif + // UAC1 + if (tud_audio_n_version(i) == 1) { + audio10_desc_as_iso_data_ep_t const *desc_ep = (audio10_desc_as_iso_data_ep_t const *) p_desc; + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + // Explicit feedback EP + if (desc_ep->bRefresh > 0) { + ep_fb = desc_ep->bEndpointAddress; + } + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_IN + // Data or data with implicit feedback IN EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN && desc_ep->bRefresh == 0) { + ep_in = desc_ep->bEndpointAddress; + ep_in_size = TU_MAX(tu_edpt_packet_size((tusb_desc_endpoint_t*)desc_ep), ep_in_size); + } + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_OUT + // Data OUT EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT && desc_ep->bRefresh == 0) { + ep_out = desc_ep->bEndpointAddress; + ep_out_size = TU_MAX(tu_edpt_packet_size((tusb_desc_endpoint_t*)desc_ep), ep_out_size); + } + #endif + } else { + // UAC2 + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + // Explicit feedback EP + if (desc_ep->bmAttributes.usage == 1) { + ep_fb = desc_ep->bEndpointAddress; + } + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_IN + // Data or data with implicit feedback IN EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN + && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { + ep_in = desc_ep->bEndpointAddress; + ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); + } + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_OUT + // Data OUT EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT + && desc_ep->bmAttributes.usage == 0) { + ep_out = desc_ep->bEndpointAddress; + ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); + } + #endif } } @@ -925,19 +1019,22 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL { uint8_t const *p_desc = _audiod_fct[i].p_desc; - uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { // For data or data with implicit feedback IN EP + // For UAC1 this is always the case since there is no usage field if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { _audiod_fct[i].interval_tx = desc_ep->bInterval; } } - } else if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL) { + } else if (tud_audio_n_version(i) == 2 && + tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL) { + // For UAC2 only, UAC1 doesn't have a clock source if (tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) { _audiod_fct[i].bclock_id_tx = p_desc[8]; } @@ -950,7 +1047,7 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP { uint8_t const *p_desc = _audiod_fct[i].p_desc; - uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { // For each endpoint @@ -978,7 +1075,7 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint TU_ASSERT(i < CFG_TUD_AUDIO); // This is all we need so far - the EPs are setup by a later set_interface request (as per UAC2 specification) - uint16_t drv_len = _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN;// - TUD_AUDIO_DESC_IAD_LEN since tinyUSB already handles the IAD descriptor + uint16_t drv_len = _audiod_fct[i].desc_length; return drv_len; } @@ -1090,9 +1187,13 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p // Open new EP if necessary - EPs are only to be closed or opened for AS interfaces - Look for AS interface with correct alternate interface uint8_t const *p_desc = tu_desc_next(audio->p_desc); // Skip entire AC descriptor block - p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + if (tud_audio_n_version(func_id) == 1) { + p_desc += ((audio10_desc_cs_ac_interface_n_t(1) const *) p_desc)->wTotalLength; + } else { + p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + } // Get pointer at end - uint8_t const *p_desc_end = audio->p_desc + audio->desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = audio->p_desc + audio->desc_length; // p_desc starts at required interface with alternate setting zero // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning @@ -1276,9 +1377,11 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const TU_VERIFY(audiod_verify_entity_exists(itf, entityID, &func_id)); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + if (tud_audio_n_version(func_id) == 2) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + } } #endif @@ -1537,47 +1640,6 @@ static void audiod_fb_fifo_count_update(audiod_function_t *audio, uint16_t lvl_n audio->feedback.value = feedback; } -uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) { - audiod_function_t *audio = &_audiod_fct[func_id]; - uint32_t feedback; - - switch (audio->feedback.compute_method) { - case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: - feedback = (cycles << audio->feedback.compute.power_of_2); - break; - - case AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT: - feedback = (uint32_t) ((float) cycles * audio->feedback.compute.float_const); - break; - - case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: { - uint64_t fb64 = (((uint64_t) cycles) * audio->feedback.compute.fixed.sample_freq) << (16 - (audio->feedback.frame_shift - 1)); - feedback = (uint32_t) (fb64 / audio->feedback.compute.fixed.mclk_freq); - } break; - - default: - return 0; - } - - // For Windows: https://docs.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers - // The size of isochronous packets created by the device must be within the limits specified in FMT-2.0 section 2.3.1.1. - // This means that the deviation of actual packet size from nominal size must not exceed +/- one audio slot - // (audio slot = channel count samples). - if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; - if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; - - tud_audio_n_fb_set(func_id, feedback); - - return feedback; -} - -bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback) { - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); - - _audiod_fct[func_id].feedback.value = feedback; - - return true; -} #endif TU_ATTR_FAST_FUNC void audiod_sof_isr(uint8_t rhport, uint32_t frame_count) { @@ -1651,12 +1713,14 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req TU_VERIFY(0 == tu_memcpy_s(_audiod_fct[func_id].ctrl_buf, _audiod_fct[func_id].ctrl_buf_sz, data, (size_t) len)); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - // Find data for sampling_frequency_control - if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE) { - uint8_t entityID = TU_U16_HIGH(p_request->wIndex); - uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + if (tud_audio_n_version(func_id) == 2) { + // Find data for sampling_frequency_control + if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE) { + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + } } } #endif @@ -1673,7 +1737,12 @@ static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t * if (_audiod_fct[i].p_desc && ((tusb_desc_interface_t const *) _audiod_fct[i].p_desc)->bInterfaceNumber == itf) { // Get pointers after class specific AC descriptors and end of AC descriptors - entities are defined in between uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc);// Points to CS AC descriptor - uint8_t const *p_desc_end = ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength + p_desc; + uint8_t const *p_desc_end = p_desc; + if (tud_audio_n_version(i) == 1) { + p_desc_end += ((audio10_desc_cs_ac_interface_n_t(1) const *) p_desc)->wTotalLength; + } else { + p_desc_end += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + } p_desc = tu_desc_next(p_desc);// Get past CS AC descriptor // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning @@ -1696,7 +1765,7 @@ static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id) { if (_audiod_fct[i].p_desc) { // Get pointer at beginning and end uint8_t const *p_desc = _audiod_fct[i].p_desc; - uint8_t const *p_desc_end = _audiod_fct[i].p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = _audiod_fct[i].p_desc + _audiod_fct[i].desc_length; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *)p_desc)->bInterfaceNumber == itf) { @@ -1719,7 +1788,11 @@ static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id) { // Advance past AC descriptors - EP we look for are streaming EPs uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc); - p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + if (tud_audio_n_version(i) == 1) { + p_desc += ((audio10_desc_cs_ac_interface_n_t(1) const *) p_desc)->wTotalLength; + } else { + p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + } // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { @@ -1739,19 +1812,31 @@ static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t c p_desc = tu_desc_next(p_desc);// Exclude standard AS interface descriptor of current alternate interface descriptor - // Look for a Class-Specific AS Interface Descriptor(4.9.2) to verify format type and format and also to get number of physical channels - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_AS_GENERAL) { - audio->n_channels_tx = ((audio20_desc_cs_as_interface_t const *) p_desc)->bNrChannels; - audio->format_type_tx = (audio20_format_type_t) (((audio20_desc_cs_as_interface_t const *) p_desc)->bFormatType); - // Look for a Type I Format Type Descriptor(2.3.1.6 - Audio Formats) - p_desc = tu_desc_next(p_desc); - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE && ((audio20_desc_type_I_format_t const *) p_desc)->bFormatType == AUDIO20_FORMAT_TYPE_I) { - audio->n_bytes_per_sample_tx = ((audio20_desc_type_I_format_t const *) p_desc)->bSubslotSize; + if (tud_audio_n_version(audio - _audiod_fct) == 1) { + p_desc = tu_desc_next(p_desc);// Exclude Class-Specific AS Interface Descriptor(4.5.2) to get to format type descriptor + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE) { + audio->format_type_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bFormatType; + if (audio->format_type_tx == AUDIO10_FORMAT_TYPE_I) { + audio->n_channels_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bNrChannels; + audio->n_bytes_per_sample_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bSubFrameSize; + } + } + } else { + // Look for a Class-Specific AS Interface Descriptor(4.9.2) to verify format type and format and also to get number of physical channels + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_AS_GENERAL) { + audio->n_channels_tx = ((audio20_desc_cs_as_interface_t const *) p_desc)->bNrChannels; + audio->format_type_tx = ((audio20_desc_cs_as_interface_t const *) p_desc)->bFormatType; + // Look for a Type I Format Type Descriptor(2.3.1.6 - Audio Formats) + p_desc = tu_desc_next(p_desc); + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE && ((audio20_desc_type_I_format_t const *) p_desc)->bFormatType == AUDIO20_FORMAT_TYPE_I) { + audio->n_bytes_per_sample_tx = ((audio20_desc_type_I_format_t const *) p_desc)->bSubslotSize; + } } } } static bool audiod_calc_tx_packet_sz(audiod_function_t *audio) { + // AUDIO20_FORMAT_TYPE_I = AUDIO10_FORMAT_TYPE_I TU_VERIFY(audio->format_type_tx == AUDIO20_FORMAT_TYPE_I); TU_VERIFY(audio->n_channels_tx); TU_VERIFY(audio->n_bytes_per_sample_tx); diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index ec710aed5..d2d794053 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -37,20 +37,6 @@ // All sizes are in bytes! -#ifndef CFG_TUD_AUDIO_FUNC_1_DESC_LEN -#error You must tell the driver the length of the audio function descriptor including IAD descriptor -#endif -#if CFG_TUD_AUDIO > 1 -#ifndef CFG_TUD_AUDIO_FUNC_2_DESC_LEN -#error You must tell the driver the length of the audio function descriptor including IAD descriptor -#endif -#endif -#if CFG_TUD_AUDIO > 2 -#ifndef CFG_TUD_AUDIO_FUNC_3_DESC_LEN -#error You must tell the driver the length of the audio function descriptor including IAD descriptor -#endif -#endif - // Size of control buffer used to receive and send control messages via EP0 - has to be big enough to hold your biggest request structure e.g. range requests with multiple intervals defined or cluster descriptors #ifndef CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ #error You must define an audio class control request buffer size! @@ -205,6 +191,7 @@ extern "C" { // CFG_TUD_AUDIO > 1 //--------------------------------------------------------------------+ bool tud_audio_n_mounted(uint8_t func_id); +uint8_t tud_audio_n_version(uint8_t func_id); #if CFG_TUD_AUDIO_ENABLE_EP_OUT uint16_t tud_audio_n_available (uint8_t func_id); @@ -220,13 +207,14 @@ tu_fifo_t* tud_audio_n_get_ep_in_ff (uint8_t func_id); #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -bool tud_audio_int_n_write (uint8_t func_id, const audio20_interrupt_data_t * data); +bool tud_audio_int_n_write (uint8_t func_id, const audio_interrupt_data_t * data); #endif //--------------------------------------------------------------------+ // Application API (Interface0) //--------------------------------------------------------------------+ static inline bool tud_audio_mounted (void); +static inline uint8_t tud_audio_version (void); #if CFG_TUD_AUDIO_ENABLE_EP_OUT static inline uint16_t tud_audio_available (void); @@ -244,7 +232,7 @@ static inline tu_fifo_t* tud_audio_get_ep_in_ff (void); // INT CTR API #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -static inline bool tud_audio_int_write (const audio20_interrupt_data_t * data); +static inline bool tud_audio_int_write (const audio_interrupt_data_t * data); #endif // Buffer control EP data and schedule a transmit @@ -397,6 +385,10 @@ TU_ATTR_ALWAYS_INLINE static inline bool tud_audio_mounted(void) { return tud_audio_n_mounted(0); } +TU_ATTR_ALWAYS_INLINE static inline uint8_t tud_audio_version(void) { + return tud_audio_n_version(0); +} + #if CFG_TUD_AUDIO_ENABLE_EP_OUT TU_ATTR_ALWAYS_INLINE static inline uint16_t tud_audio_available(void) { @@ -434,7 +426,7 @@ TU_ATTR_ALWAYS_INLINE static inline tu_fifo_t* tud_audio_get_ep_in_ff(void) { #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -TU_ATTR_ALWAYS_INLINE static inline bool tud_audio_int_write(const audio20_interrupt_data_t * data) { +TU_ATTR_ALWAYS_INLINE static inline bool tud_audio_int_write(const audio_interrupt_data_t * data) { return tud_audio_int_n_write(0, data); } #endif diff --git a/src/device/usbd.h b/src/device/usbd.h index 3ed1015b6..79105e8ac 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -443,7 +443,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ // AUDIO simple descriptor (UAC1) for 1 microphone input // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal -#define TUD_AUDIO10_MIC_ONE_CH_DESC_LEN (\ +#define TUD_AUDIO10_MIC_ONE_CH_DESC_LEN(_nfreqs) (\ + TUD_AUDIO10_DESC_STD_AC_LEN\ + TUD_AUDIO10_DESC_CS_AC_LEN(1)\ + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ @@ -452,7 +452,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ + TUD_AUDIO10_DESC_STD_AS_LEN\ + TUD_AUDIO10_DESC_STD_AS_LEN\ + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN) @@ -476,11 +476,11 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Class-Specific AS Interface Descriptor(4.5.2) */\ TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_delay*/ 0x00, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ /* Type I Format Type Descriptor(2.2.5) */\ - TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freqtype*/ 0x01, /*_freq*/ _freq),\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freq*/ __VA_ARGS__),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01, /* _sync_ep */ 0x00),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ - TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ 0x00, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) /* Audio v2.0 Descriptor Templates */ -- cgit v1.3.1 From 8f9eee6a811350eb7b8f0bcf26fdde342a53ac8f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 29 Sep 2025 00:43:18 +0200 Subject: Implement UAC1 IN flow control Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 114 ++++++++++++++++++++++++----------------- src/device/usbd.h | 2 +- 2 files changed, 69 insertions(+), 47 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index c56752536..6e982987e 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -376,7 +376,7 @@ TU_ATTR_WEAK TU_ATTR_FAST_FUNC void tud_audio_feedback_interval_isr(uint8_t func #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -TU_ATTR_WEAK void tud_audio_int_xfer_cb(uint8_t rhport) { +TU_ATTR_WEAK void tud_audio_int_done_cb(uint8_t rhport) { (void) rhport; } #endif @@ -942,55 +942,44 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { - // UAC1 + // Unified UAC1/UAC2 endpoint processing + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + bool is_feedback_ep = false; + bool is_data_ep = false; + if (tud_audio_n_version(i) == 1) { - audio10_desc_as_iso_data_ep_t const *desc_ep = (audio10_desc_as_iso_data_ep_t const *) p_desc; - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - // Explicit feedback EP - if (desc_ep->bRefresh > 0) { - ep_fb = desc_ep->bEndpointAddress; - } - #endif - #if CFG_TUD_AUDIO_ENABLE_EP_IN - // Data or data with implicit feedback IN EP - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN && desc_ep->bRefresh == 0) { - ep_in = desc_ep->bEndpointAddress; - ep_in_size = TU_MAX(tu_edpt_packet_size((tusb_desc_endpoint_t*)desc_ep), ep_in_size); - } - #endif - #if CFG_TUD_AUDIO_ENABLE_EP_OUT - // Data OUT EP - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT && desc_ep->bRefresh == 0) { - ep_out = desc_ep->bEndpointAddress; - ep_out_size = TU_MAX(tu_edpt_packet_size((tusb_desc_endpoint_t*)desc_ep), ep_out_size); - } - #endif + // UAC1: Use bRefresh field to distinguish endpoint types + audio10_desc_as_iso_data_ep_t const *desc_ep_uac1 = (audio10_desc_as_iso_data_ep_t const *) p_desc; + is_feedback_ep = (desc_ep_uac1->bRefresh > 0); + is_data_ep = (desc_ep_uac1->bRefresh == 0); } else { - // UAC2 - tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + // UAC2: Use bmAttributes.usage to distinguish endpoint types + is_feedback_ep = (desc_ep->bmAttributes.usage == 1); + is_data_ep = (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2); + } + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - // Explicit feedback EP - if (desc_ep->bmAttributes.usage == 1) { - ep_fb = desc_ep->bEndpointAddress; - } + // Explicit feedback EP + if (is_feedback_ep) { + ep_fb = desc_ep->bEndpointAddress; + } + #else + (void) is_feedback_ep; #endif #if CFG_TUD_AUDIO_ENABLE_EP_IN - // Data or data with implicit feedback IN EP - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN - && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { - ep_in = desc_ep->bEndpointAddress; - ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); - } + // Data or data with implicit feedback IN EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN && is_data_ep) { + ep_in = desc_ep->bEndpointAddress; + ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); + } #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT - // Data OUT EP - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT - && desc_ep->bmAttributes.usage == 0) { - ep_out = desc_ep->bEndpointAddress; - ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); - } - #endif + // Data OUT EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT && is_data_ep) { + ep_out = desc_ep->bEndpointAddress; + ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); } + #endif } p_desc = tu_desc_next(p_desc); @@ -1216,12 +1205,26 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p #endif uint8_t const ep_addr = desc_ep->bEndpointAddress; + bool is_feedback_ep = false; + bool is_data_ep = false; + + if (tud_audio_n_version(func_id) == 1) { + // UAC1: Use bRefresh field to distinguish endpoint types + audio10_desc_as_iso_data_ep_t const *desc_ep_uac1 = (audio10_desc_as_iso_data_ep_t const *) p_desc; + is_feedback_ep = (desc_ep_uac1->bRefresh > 0); + is_data_ep = (desc_ep_uac1->bRefresh == 0); + } else { + // UAC2: Use bmAttributes.usage to distinguish endpoint types + is_feedback_ep = (desc_ep->bmAttributes.usage == 1); + is_data_ep = (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2); + } + //TODO: We need to set EP non busy since this is not taken care of right now in ep_close() - THIS IS A WORKAROUND! usbd_edpt_clear_stall(rhport, ep_addr); #if CFG_TUD_AUDIO_ENABLE_EP_IN // For data or data with implicit feedback IN EP - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) + if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && is_data_ep) { // Save address audio->ep_in = ep_addr; @@ -1245,7 +1248,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p #if CFG_TUD_AUDIO_ENABLE_EP_OUT // Checking usage not necessary - if (tu_edpt_dir(ep_addr) == TUSB_DIR_OUT) { + if (tu_edpt_dir(ep_addr) == TUSB_DIR_OUT && is_data_ep) { // Save address audio->ep_out = ep_addr; audio->ep_out_as_intf_num = itf; @@ -1262,13 +1265,17 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // Check if usage is explicit data feedback - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && desc_ep->bmAttributes.usage == 1) { + if (is_feedback_ep) { audio->ep_fb = ep_addr; audio->feedback.frame_shift = desc_ep->bInterval - 1; // Schedule first feedback transmit audiod_fb_send(audio); } + #else + (void) is_feedback_ep; #endif +#else + (void) is_feedback_ep; #endif// CFG_TUD_AUDIO_ENABLE_EP_OUT foundEPs += 1; @@ -1381,6 +1388,7 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } #endif @@ -1402,6 +1410,17 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const // Check if entity is present and get corresponding driver index TU_VERIFY(audiod_verify_ep_exists(ep, &func_id)); +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + if (tud_audio_n_version(func_id) == 1) { + if (_audiod_fct[func_id].ep_in == ep) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + if (ctrlSel == AUDIO10_EP_CTRL_SAMPLING_FREQ && p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf) & 0x00FFFFFF; + audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); + } + } + } +#endif // Invoke callback return tud_audio_set_req_ep_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); } break; @@ -1525,7 +1544,7 @@ bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 // I assume here, that things above are handled by PHY // All transmission is done - what remains to do is to inform job was completed - tud_audio_int_xfer_cb(rhport); + tud_audio_int_done_cb(rhport); return true; } @@ -1720,6 +1739,7 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } } @@ -1819,6 +1839,8 @@ static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t c if (audio->format_type_tx == AUDIO10_FORMAT_TYPE_I) { audio->n_channels_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bNrChannels; audio->n_bytes_per_sample_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bSubFrameSize; + // Save sample rate - needed when EP doesn't support setting sample rate + audio->sample_rate_tx = tu_unaligned_read32(((audio10_desc_type_I_format_n_t(1) const *) p_desc)->tSamFreq) & 0x00FFFFFF; } } } else { diff --git a/src/device/usbd.h b/src/device/usbd.h index 79105e8ac..0487518cf 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -480,7 +480,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01, /* _sync_ep */ 0x00),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ - TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ 0x00, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) /* Audio v2.0 Descriptor Templates */ -- cgit v1.3.1 From 5d179c255bdfa5d2639c68638d593446a46a1e30 Mon Sep 17 00:00:00 2001 From: Mengsk Date: Mon, 29 Sep 2025 17:50:23 +0200 Subject: Update TUD_AUDIO_EP_SIZE macro Signed-off-by: Mengsk --- examples/device/audio_4_channel_mic/src/tusb_config.h | 2 +- examples/device/audio_4_channel_mic_freertos/src/tusb_config.h | 2 +- examples/device/audio_test/src/tusb_config.h | 2 +- examples/device/audio_test_freertos/src/tusb_config.h | 2 +- examples/device/audio_test_multi_rate/src/tusb_config.h | 4 ++-- examples/device/cdc_uac2/src/tusb_config.h | 8 ++++---- examples/device/cdc_uac2/src/usb_descriptors.h | 8 ++++---- examples/device/uac2_headset/src/tusb_config.h | 8 ++++---- examples/device/uac2_headset/src/usb_descriptors.h | 8 ++++---- src/device/usbd.h | 4 ++-- 10 files changed, 24 insertions(+), 24 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index a1b3a1050..6115f44bb 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -110,7 +110,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup -#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 7aaf7ffa0..7ce55aa77 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -116,7 +116,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup -#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 9ef53e39d..32859b610 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -113,7 +113,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! -#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index 343bebc96..ceb496e8d 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -119,7 +119,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! -#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index e68005375..9a73a2cd9 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -127,8 +127,8 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example write FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index 43949186f..f1cff7e9a 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -140,8 +140,8 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device @@ -149,8 +149,8 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/cdc_uac2/src/usb_descriptors.h b/examples/device/cdc_uac2/src/usb_descriptors.h index afb74d5b5..95d8da5c3 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.h +++ b/examples/device/cdc_uac2/src/usb_descriptors.h @@ -117,7 +117,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ @@ -127,7 +127,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ @@ -141,7 +141,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ @@ -151,7 +151,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index c6d00d4fb..5e6211cc0 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -141,8 +141,8 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device @@ -150,8 +150,8 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index 68d15a857..465fa6035 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -117,7 +117,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ @@ -127,7 +127,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ @@ -141,7 +141,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ @@ -151,7 +151,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) diff --git a/src/device/usbd.h b/src/device/usbd.h index 0487518cf..184cfea5e 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -703,8 +703,8 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ 1) // Calculate wMaxPacketSize of Endpoints -#define TUD_AUDIO_EP_SIZE(_maxFrequency, _nBytesPerSample, _nChannels) \ - ((((_maxFrequency + (TUD_OPT_HIGH_SPEED ? 7999 : 999)) / (TUD_OPT_HIGH_SPEED ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels) +#define TUD_AUDIO_EP_SIZE(_is_highspeed, _maxFrequency, _nBytesPerSample, _nChannels) \ + ((((_maxFrequency + (_is_highspeed ? 7999 : 999)) / (_is_highspeed ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels) //--------------------------------------------------------------------+ -- cgit v1.3.1 From 9afe71c77ef3ab05f87f7fd37e7c39cd3d09cdb7 Mon Sep 17 00:00:00 2001 From: Mengsk Date: Mon, 29 Sep 2025 17:51:10 +0200 Subject: Add UAC1 support to speaker example Signed-off-by: Mengsk --- examples/device/uac2_headset/src/main.c | 35 ++- examples/device/uac2_speaker_fb/CMakeLists.txt | 1 - examples/device/uac2_speaker_fb/src/main.c | 309 +++++++++++++++++---- .../device/uac2_speaker_fb/src/quirk_os_guessing.c | 90 ------ .../device/uac2_speaker_fb/src/quirk_os_guessing.h | 75 ----- examples/device/uac2_speaker_fb/src/tusb_config.h | 44 ++- .../device/uac2_speaker_fb/src/usb_descriptors.c | 168 +++++------ .../device/uac2_speaker_fb/src/usb_descriptors.h | 14 +- src/device/usbd.h | 9 +- 9 files changed, 398 insertions(+), 347 deletions(-) delete mode 100644 examples/device/uac2_speaker_fb/src/quirk_os_guessing.c delete mode 100644 examples/device/uac2_speaker_fb/src/quirk_os_guessing.h diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 6cfab946b..31b2f3ee3 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -142,7 +142,7 @@ void tud_resume_cb(void) { } // Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool tud_audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { @@ -177,7 +177,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_ } // Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio20_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); @@ -199,7 +199,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_ } // Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool tud_audio20_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { @@ -227,7 +227,7 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_r } // Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio20_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); @@ -262,16 +262,21 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_r // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; - - if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio_clock_get_request(rhport, request); - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) - return tud_audio_feature_unit_get_request(rhport, request); - else { - TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", - request->bEntityID, request->bControlSelector, request->bRequest); + if (tud_audio_version() == 1) { + // No entity in UAC1 + } else { + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; + + if (request->bEntityID == UAC2_ENTITY_CLOCK) + return tud_audio20_clock_get_request(rhport, request); + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + return tud_audio20_feature_unit_get_request(rhport, request); + else { + TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + } } + return false; } @@ -280,9 +285,9 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) - return tud_audio_feature_unit_set_request(rhport, request, buf); + return tud_audio20_feature_unit_set_request(rhport, request, buf); if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio_clock_set_request(rhport, request, buf); + return tud_audio20_clock_set_request(rhport, request, buf); TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); diff --git a/examples/device/uac2_speaker_fb/CMakeLists.txt b/examples/device/uac2_speaker_fb/CMakeLists.txt index 0ed3db646..ced98a909 100644 --- a/examples/device/uac2_speaker_fb/CMakeLists.txt +++ b/examples/device/uac2_speaker_fb/CMakeLists.txt @@ -21,7 +21,6 @@ add_executable(${PROJECT}) target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/quirk_os_guessing.c ) # Example include diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 2e525ef28..936da4c80 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -31,25 +31,17 @@ #include "tusb.h" #include "usb_descriptors.h" -#ifdef CFG_QUIRK_OS_GUESSING - #include "quirk_os_guessing.h" -#endif - //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ -// List of supported sample rates -#if defined(__RX__) -const uint32_t sample_rates[] = {44100, 48000}; -#else +// List of supported sample rates for UAC2 const uint32_t sample_rates[] = {44100, 48000, 88200, 96000}; -#endif - -uint32_t current_sample_rate = 44100; #define N_SAMPLE_RATES TU_ARRAY_SIZE(sample_rates) +uint32_t current_sample_rate = 44100; + /* Blink pattern * - 25 ms : streaming data * - 250 ms : device not mounted @@ -153,8 +145,179 @@ void tud_resume_cb(void) { // Application Callback API Implementations //--------------------------------------------------------------------+ -// Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { +//--------------------------------------------------------------------+ +// UAC1 Helper Functions +//--------------------------------------------------------------------+ + +static bool audio10_set_req_ep(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { + // Request uses 3 bytes + TU_VERIFY(p_request->wLength == 3); + + current_sample_rate = tu_unaligned_read32(pBuff) & 0x00FFFFFF; + + TU_LOG2("EP set current freq: %" PRIu32 "\r\n", current_sample_rate); + + return true; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} + +static bool audio10_get_req_ep(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_GET_CUR) { + TU_LOG2("EP get current freq\r\n"); + + uint8_t freq[3]; + freq[0] = (uint8_t) (current_sample_rate & 0xFF); + freq[1] = (uint8_t) ((current_sample_rate >> 8) & 0xFF); + freq[2] = (uint8_t) ((current_sample_rate >> 16) & 0xFF); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, freq, sizeof(freq)); + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} + +static bool audio10_set_req_entity(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our feature unit + if (entityID == UAC1_ENTITY_FEATURE_UNIT) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength ==1); + + mute[channelNum] = pBuff[0]; + + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength == 2); + + volume[channelNum] = (int16_t)tu_unaligned_read16(pBuff) / 256; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +static bool audio10_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our feature unit + if (entityID == UAC1_ENTITY_FEATURE_UNIT) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); + + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_GET_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + { + int16_t vol = (int16_t) volume[channelNum]; + vol = vol * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &vol, sizeof(vol)); + } + + case AUDIO10_CS_REQ_GET_MIN: + TU_LOG2(" Get Volume min of channel: %u\r\n", channelNum); + { + int16_t min = -90; // -90 dB + min = min * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &min, sizeof(min)); + } + + case AUDIO10_CS_REQ_GET_MAX: + TU_LOG2(" Get Volume max of channel: %u\r\n", channelNum); + { + int16_t max = 30; // +30 dB + max = max * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &max, sizeof(max)); + } + + case AUDIO10_CS_REQ_GET_RES: + TU_LOG2(" Get Volume res of channel: %u\r\n", channelNum); + { + int16_t res = 128; // 0.5 dB + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &res, sizeof(res)); + } + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +//--------------------------------------------------------------------+ +// UAC2 Helper Functions +//--------------------------------------------------------------------+ + +#if TUD_OPT_HIGH_SPEED + +static bool audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { @@ -188,10 +351,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_ return false; } -// Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { - (void) rhport; - +static bool audio20_clock_set_request(audio20_control_request_t const *request, uint8_t const *buf) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); @@ -210,8 +370,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_ } } -// Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool audio20_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_FEATURE_UNIT); if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { @@ -238,10 +397,7 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_r return false; } -// Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { - (void) rhport; - +static bool audio20_feature_unit_set_request(audio20_control_request_t const *request, uint8_t const *buf) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_FEATURE_UNIT); TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); @@ -268,14 +424,13 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_r } } -// Invoked when audio class specific get request received for an entity -bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { +static bool audio20_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio_clock_get_request(rhport, request); + return audio20_clock_get_request(rhport, request); if (request->bEntityID == UAC2_ENTITY_FEATURE_UNIT) - return tud_audio_feature_unit_get_request(rhport, request); + return audio20_feature_unit_get_request(rhport, request); else { TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); @@ -283,31 +438,24 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p return false; } -// Invoked when audio class specific set request received for an entity -bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { +static bool audio20_set_req_entity(tusb_control_request_t const *p_request, uint8_t *buf) { audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_FEATURE_UNIT) - return tud_audio_feature_unit_set_request(rhport, request, buf); + return audio20_feature_unit_set_request(request, buf); if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio_clock_set_request(rhport, request, buf); + return audio20_clock_set_request(request, buf); TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); return false; } -bool tud_audio_set_itf_close_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - - uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); - uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); - - if (ITF_NUM_AUDIO_STREAMING == itf && alt == 0) - blink_interval_ms = BLINK_MOUNTED; +#endif // TUD_OPT_HIGH_SPEED - return true; -} +//--------------------------------------------------------------------+ +// Main Callback Functions +//--------------------------------------------------------------------+ bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { (void) rhport; @@ -325,6 +473,75 @@ bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_reques return true; } +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { + (void) rhport; + (void) pBuff; + + if (tud_audio_version() == 1) { + return audio10_set_req_ep(p_request, pBuff); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_ep(rhport, p_request); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific set request received for an entity +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_set_req_entity(p_request, buf); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_set_req_entity(p_request, buf); +#endif + } + + return false; +} + +// Invoked when audio class specific get request received for an entity +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_entity(rhport, p_request); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_get_req_entity(rhport, p_request); +#endif + } + + return false; +} + +bool tud_audio_set_itf_close_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); + uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); + + if (ITF_NUM_AUDIO_STREAMING == itf && alt == 0) + blink_interval_ms = BLINK_MOUNTED; + + return true; +} + void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, audio_feedback_params_t *feedback_param) { (void) func_id; (void) alt_itf; @@ -349,16 +566,6 @@ bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t fu } #endif -#if CFG_QUIRK_OS_GUESSING -bool tud_audio_feedback_format_correction_cb(uint8_t func_id) { - (void) func_id; - if (tud_speed_get() == TUSB_SPEED_FULL && quirk_os_guessing_get() == QUIRK_OS_GUESSING_OSX) { - return true; - } else { - return false; - } -} -#endif //--------------------------------------------------------------------+ // AUDIO Task //--------------------------------------------------------------------+ diff --git a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c b/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c deleted file mode 100644 index 92b9ab6ee..000000000 --- a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 HiFiPhile - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "quirk_os_guessing.h" - -static tusb_desc_type_t desc_req_buf[2]; -static int desc_req_idx = 0; - -// Place at the start of tud_descriptor_device_cb() -void quirk_os_guessing_desc_device_cb(void) { - desc_req_idx = 0; -} - -// Place at the start of tud_descriptor_configuration_cb() -void quirk_os_guessing_desc_configuration_cb(void) { - // Skip redundant request - if (desc_req_idx == 0 || (desc_req_idx == 1 && desc_req_buf[0] != TUSB_DESC_CONFIGURATION)) { - desc_req_buf[desc_req_idx++] = TUSB_DESC_CONFIGURATION; - } -} - -// Place at the start of tud_descriptor_bos_cb() -void quirk_os_guessing_desc_bos_cb(void) { - // Skip redundant request - if (desc_req_idx == 0 || (desc_req_idx == 1 && desc_req_buf[0] != TUSB_DESC_BOS)) { - desc_req_buf[desc_req_idx++] = TUSB_DESC_BOS; - } -} - -// Place at the start of tud_descriptor_string_cb() -void quirk_os_guessing_desc_string_cb(void) { - // Skip redundant request - if (desc_req_idx == 0 || (desc_req_idx == 1 && desc_req_buf[0] != TUSB_DESC_STRING)) { - desc_req_buf[desc_req_idx++] = TUSB_DESC_STRING; - } -} - -// Each OS request descriptors differently: -// Windows 10 - 11 -// Device Desc -// Config Desc -// BOS Desc -// String Desc -// Linux 3.16 - 6.8 -// Device Desc -// BOS Desc -// Config Desc -// String Desc -// OS X Ventura - Sonoma -// Device Desc -// String Desc -// Config Desc || BOS Desc -// BOS Desc || Config Desc -quirk_os_guessing_t quirk_os_guessing_get(void) { - if (desc_req_idx < 2) { - return QUIRK_OS_GUESSING_UNKNOWN; - } - - if (desc_req_buf[0] == TUSB_DESC_BOS && desc_req_buf[1] == TUSB_DESC_CONFIGURATION) { - return QUIRK_OS_GUESSING_LINUX; - } else if (desc_req_buf[0] == TUSB_DESC_CONFIGURATION && desc_req_buf[1] == TUSB_DESC_BOS) { - return QUIRK_OS_GUESSING_WINDOWS; - } else if (desc_req_buf[0] == TUSB_DESC_STRING && (desc_req_buf[1] == TUSB_DESC_BOS || desc_req_buf[1] == TUSB_DESC_CONFIGURATION)) { - return QUIRK_OS_GUESSING_OSX; - } - - return QUIRK_OS_GUESSING_UNKNOWN; -} diff --git a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.h b/examples/device/uac2_speaker_fb/src/quirk_os_guessing.h deleted file mode 100644 index 1120355c9..000000000 --- a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 HiFiPhile - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#ifndef _QUIRK_OS_GUESSING_H_ -#define _QUIRK_OS_GUESSING_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#include "tusb.h" - -//================================== !!! WARNING !!! ==================================== -// This quirk operate out of USB specification in order to workaround specific issues. -// It may not work on your platform. -//======================================================================================= -// -// Prerequisites: -// - Set USB version to at least 2.01 in Device Descriptor -// - Has a valid BOS Descriptor, refer to webusb_serial example -// -// Attention: -// Windows detection result comes out after Configuration Descriptor request, -// meaning it will be too late to do descriptor adjustment. It's advised to make -// Windows as default configuration and adjust to other OS accordingly. - -typedef enum { - QUIRK_OS_GUESSING_UNKNOWN, - QUIRK_OS_GUESSING_LINUX, - QUIRK_OS_GUESSING_OSX, - QUIRK_OS_GUESSING_WINDOWS, -} quirk_os_guessing_t; - -// Get Host OS type -quirk_os_guessing_t quirk_os_guessing_get(void); - -// Place at the start of tud_descriptor_device_cb() -void quirk_os_guessing_desc_device_cb(void); - -// Place at the start of tud_descriptor_configuration_cb() -void quirk_os_guessing_desc_configuration_cb(void); - -// Place at the start of tud_descriptor_bos_cb() -void quirk_os_guessing_desc_bos_cb(void); - -// Place at the start of tud_descriptor_string_cb() -void quirk_os_guessing_desc_string_cb(void); - -#ifdef __cplusplus - } -#endif - -#endif /* _QUIRK_OS_GUESSING_H_ */ diff --git a/examples/device/uac2_speaker_fb/src/tusb_config.h b/examples/device/uac2_speaker_fb/src/tusb_config.h index 3bf082096..b91a9ea5a 100644 --- a/examples/device/uac2_speaker_fb/src/tusb_config.h +++ b/examples/device/uac2_speaker_fb/src/tusb_config.h @@ -87,14 +87,6 @@ extern "C" { #define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif -/* (Needed for Full-Speed only) - * Enable host OS guessing to workaround UAC2 compatibility issues between Windows and OS X - * The default configuration only support Windows and Linux, enable this option for OS X - * support. Otherwise if you don't need Windows support you can make OS X's configuration as - * default. - */ -#define CFG_QUIRK_OS_GUESSING 1 - //-------------------------------------------------------------------- // DEVICE CONFIGURATION //-------------------------------------------------------------------- @@ -128,33 +120,33 @@ extern "C" { // AUDIO CLASS DRIVER CONFIGURATION //-------------------------------------------------------------------- -// Can be enabled with Full-Speed device on OSX, which forces feedback EP size to 3, in this case CFG_QUIRK_OS_GUESSING can be disabled -#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION 0 +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX 2 -// Audio format type I specifications -#if defined(__RX__) -#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 48000 -#else -#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 96000 -#endif +// 16bit data in 16bit slots +#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX 2 +#define CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX 16 -#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX 2 +// UAC1 Full-Speed endpoint size +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE_FS 48000 +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_FS TUD_AUDIO_EP_SIZE(false, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE_FS, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +// UAC2 High-Speed endpoint size +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE_HS 96000 +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_HS TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE_HS, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -// 16bit in 16bit slots -#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX 2 -#define CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX 16 +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_FS, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_HS) -// EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) -#define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 +// AUDIO_FEEDBACK_METHOD_FIFO_COUNT needs buffer size >= 4* EP size to work correctly +// Example read FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_FS, 32 * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_HS) -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device +// Enable OUT EP +#define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 // Enable feedback EP -#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 1 +#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 1 // Size of control request buffer -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 #ifdef __cplusplus } diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.c b/examples/device/uac2_speaker_fb/src/usb_descriptors.c index 9e12c88b4..610a8f255 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.c +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.c @@ -28,10 +28,6 @@ #include "usb_descriptors.h" #include "common_types.h" -#ifdef CFG_QUIRK_OS_GUESSING -#include "quirk_os_guessing.h" -#endif - /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. * @@ -49,7 +45,7 @@ tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0201, + .bcdUSB = 0x0200, // Use Interface Association Descriptor (IAD) for Audio // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) @@ -71,12 +67,8 @@ tusb_desc_device_t const desc_device = // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ -#if CFG_QUIRK_OS_GUESSING - quirk_os_guessing_desc_device_cb(); -#endif - return (uint8_t const *)&desc_device; +uint8_t const * tud_descriptor_device_cb(void) { + return (uint8_t const *) &desc_device; } #if CFG_AUDIO_DEBUG @@ -84,8 +76,7 @@ uint8_t const * tud_descriptor_device_cb(void) // HID Report Descriptor //--------------------------------------------------------------------+ -uint8_t const desc_hid_report[] = -{ +uint8_t const desc_hid_report[] = { HID_USAGE_PAGE_N ( HID_USAGE_PAGE_VENDOR, 2 ),\ HID_USAGE ( 0x01 ),\ HID_COLLECTION ( HID_COLLECTION_APPLICATION ),\ @@ -101,8 +92,7 @@ uint8_t const desc_hid_report[] = // Invoked when received GET HID REPORT DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) -{ +uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) { (void) itf; return desc_hid_report; } @@ -112,109 +102,126 @@ uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) // Configuration Descriptor //--------------------------------------------------------------------+ -#if CFG_AUDIO_DEBUG - #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN + TUD_HID_DESC_LEN) -#else - #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN) -#endif - #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_AUDIO 0x03 #define EPNUM_AUDIO_FB 0x03 - #define EPNUM_AUDIO_OUT 0x03 #define EPNUM_DEBUG 0x04 -#elif CFG_TUSB_MCU == OPT_MCU_NRF5X - // ISO endpoints for NRF5x are fixed to 0x08 (0x88) +#elif TU_CHECK_MCU(OPT_MCU_NRF5X) + // nRF5x ISO can only be endpoint 8 + #define EPNUM_AUDIO 0x08 #define EPNUM_AUDIO_FB 0x08 - #define EPNUM_AUDIO_OUT 0x08 #define EPNUM_DEBUG 0x01 #elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_AUDIO 0x02 #define EPNUM_AUDIO_FB 0x01 - #define EPNUM_AUDIO_OUT 0x02 #define EPNUM_DEBUG 0x03 #else + #define EPNUM_AUDIO 0x01 #define EPNUM_AUDIO_FB 0x01 - #define EPNUM_AUDIO_OUT 0x01 #define EPNUM_DEBUG 0x02 #endif -uint8_t const desc_configuration_default[] = -{ - // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), +#if CFG_AUDIO_DEBUG + #define CONFIG_UAC1_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO10_SPEAKER_STEREO_FB_DESC_LEN(2) + TUD_HID_DESC_LEN) +#else + #define CONFIG_UAC1_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO10_SPEAKER_STEREO_FB_DESC_LEN(2)) +#endif + +uint8_t const desc_uac1_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC1_TOTAL_LEN, 0x00, 100), - // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, - TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 4), + // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, sample rates (44.1kHz, 48kHz) + TUD_AUDIO10_SPEAKER_STEREO_FB_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 5, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_FS, EPNUM_AUDIO_FB | 0x80, 44100, 48000), #if CFG_AUDIO_DEBUG - // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_DEBUG, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_DEBUG | 0x80, CFG_TUD_HID_EP_BUFSIZE, 7) + // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval + TUD_HID_DESCRIPTOR(ITF_NUM_DEBUG, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_DEBUG | 0x80, CFG_TUD_HID_EP_BUFSIZE, 7) #endif }; -#if CFG_QUIRK_OS_GUESSING -// OS X needs 3 bytes feedback endpoint on FS -uint8_t const desc_configuration_osx_fs[] = -{ - // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), +TU_VERIFY_STATIC(sizeof(desc_uac1_configuration) == CONFIG_UAC1_TOTAL_LEN, "Incorrect size"); - // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, - TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 3), +#if TUD_OPT_HIGH_SPEED #if CFG_AUDIO_DEBUG - // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_DEBUG, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_DEBUG | 0x80, CFG_TUD_HID_EP_BUFSIZE, 7) -#endif -}; + #define CONFIG_UAC2_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN + TUD_HID_DESC_LEN) +#else + #define CONFIG_UAC2_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN) #endif -// Invoked when received GET CONFIGURATION DESCRIPTOR -// Application return pointer to descriptor -// Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ - (void)index; // for multiple configurations +uint8_t const desc_uac2_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC2_TOTAL_LEN, 0x00, 100), -#if CFG_QUIRK_OS_GUESSING - quirk_os_guessing_desc_configuration_cb(); - if(tud_speed_get() == TUSB_SPEED_FULL && quirk_os_guessing_get() == QUIRK_OS_GUESSING_OSX) { - return desc_configuration_osx_fs; - } -#endif - return desc_configuration_default; -} + // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, + TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_HS, EPNUM_AUDIO_FB | 0x80, 4), -//--------------------------------------------------------------------+ -// BOS Descriptor, required for OS guessing quirk -//--------------------------------------------------------------------+ +#if CFG_AUDIO_DEBUG + // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval + TUD_HID_DESCRIPTOR(ITF_NUM_DEBUG, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_DEBUG | 0x80, CFG_TUD_HID_EP_BUFSIZE, 7) +#endif +}; -#define TUD_BOS_USB20_EXT_DESC_LEN 7 +TU_VERIFY_STATIC(sizeof(desc_uac2_configuration) == CONFIG_UAC2_TOTAL_LEN, "Incorrect size"); -#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_USB20_EXT_DESC_LEN) +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, -// BOS Descriptor is required for webUSB -uint8_t const desc_bos[] = -{ - // total length, number of device caps - TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 1), + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, - // USB 2.0 Extension Descriptor - 0x07, TUSB_DESC_DEVICE_CAPABILITY, DEVICE_CAPABILITY_USB20_EXTENSION, 0x00, 0x00, 0x00,0x00 + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 }; -uint8_t const * tud_descriptor_bos_cb(void) -{ -#if CFG_QUIRK_OS_GUESSING - quirk_os_guessing_desc_bos_cb(); +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const *tud_descriptor_device_qualifier_cb(void) { + return (uint8_t const *) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) { + (void) index;// for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_uac1_configuration : desc_uac2_configuration; +} + +#endif // highspeed + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { + (void) index; // for multiple configurations +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + if(tud_speed_get() == TUSB_SPEED_FULL) { + return desc_uac1_configuration; + } else { + return desc_uac2_configuration; + } +#else + return desc_uac1_configuration; #endif - return desc_bos; } //--------------------------------------------------------------------+ @@ -237,6 +244,7 @@ char const *string_desc_arr[] = "TinyUSB Speaker", // 2: Product NULL, // 3: Serials will use unique ID if possible "UAC2 Speaker", // 4: Audio Interface + "UAC1 Speaker", // 5: UAC1 Audio Interface }; static uint16_t _desc_str[32 + 1]; @@ -247,10 +255,6 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { (void) langid; size_t chr_count; -#if CFG_QUIRK_OS_GUESSING - quirk_os_guessing_desc_string_cb(); -#endif - switch ( index ) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index f71411dcf..4ae6ab616 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -26,6 +26,10 @@ #ifndef _USB_DESCRIPTORS_H_ #define _USB_DESCRIPTORS_H_ +//--------------------------------------------------------------------+ +// UAC2 DESCRIPTOR TEMPLATES +//--------------------------------------------------------------------+ + // Defined in TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR #define UAC2_ENTITY_CLOCK 0x04 #define UAC2_ENTITY_INPUT_TERMINAL 0x01 @@ -89,13 +93,13 @@ #define UAC1_ENTITY_OUTPUT_TERMINAL 0x03 #define TUD_AUDIO10_SPEAKER_STEREO_FB_DESC_LEN(_nfreqs) (\ - + TUD_AUDIO_DESC_STD_AC_LEN\ + + TUD_AUDIO10_DESC_STD_AC_LEN\ + TUD_AUDIO10_DESC_CS_AC_LEN(1)\ + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)\ - + TUD_AUDIO20_DESC_STD_AS_LEN\ - + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ @@ -124,9 +128,9 @@ /* Type I Format Type Descriptor(2.2.5) */\ TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x02, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freqs*/ __VA_ARGS__),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ - TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01, /*_sync_ep*/ _epfb),\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01, /*_sync_ep*/ _epfb),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ - TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Standard AS Isochronous Synch Endpoint Descriptor (4.6.2.1) */\ TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(/*_ep*/ _epfb, /*_bRefresh*/ 4) diff --git a/src/device/usbd.h b/src/device/usbd.h index 184cfea5e..9c61c5ef8 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -433,6 +433,11 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ #define TUD_AUDIO10_DESC_CS_AS_ISO_EP(_attr, _lockdelayunits, _lockdelay) \ TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO10_CS_EP_SUBTYPE_GENERAL, _attr, _lockdelayunits, U16_TO_U8S_LE(_lockdelay) +/* Standard AS Isochronous Synch Endpoint Descriptor UAC1 (4.6.2.1) */ +#define TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP_LEN 9 +#define TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(_ep, _bRefresh) \ + TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_ISOCHRONOUS, U16_TO_U8S_LE(3), 1, _bRefresh, 0x00 + /* Standard AC Interrupt Endpoint Descriptor UAC1 (4.4.2) */ #define TUD_AUDIO10_DESC_STD_AC_INT_EP_LEN 9 #define TUD_AUDIO10_DESC_STD_AC_INT_EP(_ep, _interval) \ @@ -460,7 +465,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Standard AC Interface Descriptor(4.3.1) */\ TUD_AUDIO10_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.3.2) */\ - TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1), /*_itf*/ ((_itfnum)+1)),\ + TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ (TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1)), /*_itf*/ ((_itfnum)+1)),\ /* Input Terminal Descriptor(4.3.2.1) */\ TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_nchannels*/ 0x01, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.3.2.2) */\ @@ -474,7 +479,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.5.2) */\ - TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_delay*/ 0x00, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ /* Type I Format Type Descriptor(2.2.5) */\ TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freq*/ __VA_ARGS__),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ -- cgit v1.3.1 From 9f75b32ac11e93bb7551f7f577b72792c696ba33 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 29 Sep 2025 20:59:29 +0200 Subject: Add UAC1 support to audio_test_multi_rate example Signed-off-by: HiFiPhile --- examples/device/audio_test_multi_rate/src/main.c | 321 +++++++++++++++------ .../device/audio_test_multi_rate/src/tusb_config.h | 24 +- .../audio_test_multi_rate/src/usb_descriptors.c | 85 ++++-- .../audio_test_multi_rate/src/usb_descriptors.h | 4 +- 4 files changed, 318 insertions(+), 116 deletions(-) diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 2e8a1dba5..9e9c32e8d 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -80,9 +80,6 @@ static const uint8_t bytesPerSampleAltList[CFG_TUD_AUDIO_FUNC_1_N_FORMATS] = CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, }; -audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state - - // Audio test data CFG_TUD_MEM_ALIGN uint8_t test_buffer_audio[(TUD_OPT_HIGH_SPEED ? 8 : 1) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; uint16_t startVal = 0; @@ -111,9 +108,6 @@ int main(void) { led_blinking_task(); audio_task(); } - - - return 0; } //--------------------------------------------------------------------+ @@ -176,71 +170,184 @@ void audio_task(void) { // Application Callback API Implementations //--------------------------------------------------------------------+ -// Invoked when set interface is called, typically on start/stop streaming or format change -bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - //uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); - uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); +//--------------------------------------------------------------------+ +// UAC1 Helper Functions +//--------------------------------------------------------------------+ - // Clear buffer when streaming format is changed - if (alt != 0) { - bytesPerSample = bytesPerSampleAltList[alt - 1]; +static bool audio10_set_req_ep(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { + // Request uses 3 bytes + TU_VERIFY(p_request->wLength == 3); + + sampFreq = tu_unaligned_read32(pBuff) & 0x00FFFFFF; + + TU_LOG2("EP set current freq: %" PRIu32 "\r\n", sampFreq); + + return true; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; } - return true; + + return false; } -// Invoked when audio class specific set request received for an EP -bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { - (void) rhport; - (void) pBuff; +static bool audio10_get_req_ep(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_GET_CUR) { + TU_LOG2("EP get current freq\r\n"); + + uint8_t freq[3]; + freq[0] = (uint8_t) (sampFreq & 0xFF); + freq[1] = (uint8_t) ((sampFreq >> 8) & 0xFF); + freq[2] = (uint8_t) ((sampFreq >> 16) & 0xFF); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, freq, sizeof(freq)); + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} - // Page 91 in UAC2 specification +static bool audio10_set_req_entity(tusb_control_request_t const *p_request, uint8_t *pBuff) { uint8_t channelNum = TU_U16_LOW(p_request->wValue); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t ep = TU_U16_LOW(p_request->wIndex); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); - (void) channelNum; - (void) ctrlSel; - (void) ep; + // If request is for our feature unit (ID defined in usbd.h) + if (entityID == 0x02) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength ==1); - return false;// Yet not implemented -} + mute[channelNum] = pBuff[0]; -// Invoked when audio class specific set request received for an interface -bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { - (void) rhport; - (void) pBuff; + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; - // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); + default: + return false; // not supported + } - // Page 91 in UAC2 specification + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength == 2); + + volume[channelNum] = (int16_t)tu_unaligned_read16(pBuff) / 256; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +static bool audio10_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { uint8_t channelNum = TU_U16_LOW(p_request->wValue); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t itf = TU_U16_LOW(p_request->wIndex); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our feature unit (ID defined in usbd.h) + if (entityID == 0x02) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); - (void) channelNum; - (void) ctrlSel; - (void) itf; + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_GET_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + { + int16_t vol = (int16_t) volume[channelNum]; + vol = vol * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &vol, sizeof(vol)); + } - return false;// Yet not implemented + case AUDIO10_CS_REQ_GET_MIN: + TU_LOG2(" Get Volume min of channel: %u\r\n", channelNum); + { + int16_t min = -90; // -90 dB + min = min * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &min, sizeof(min)); + } + + case AUDIO10_CS_REQ_GET_MAX: + TU_LOG2(" Get Volume max of channel: %u\r\n", channelNum); + { + int16_t max = 30; // +30 dB + max = max * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &max, sizeof(max)); + } + + case AUDIO10_CS_REQ_GET_RES: + TU_LOG2(" Get Volume res of channel: %u\r\n", channelNum); + { + int16_t res = 1; // 1 dB + res = res * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &res, sizeof(res)); + } + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; } -// Invoked when audio class specific set request received for an entity -bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { - (void) rhport; +//--------------------------------------------------------------------+ +// UAC2 Helper Functions +//--------------------------------------------------------------------+ + +#if TUD_OPT_HIGH_SPEED - // Page 91 in UAC2 specification +static bool audio20_set_req_entity(tusb_control_request_t const *p_request, uint8_t *pBuff) { uint8_t channelNum = TU_U16_LOW(p_request->wValue); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t itf = TU_U16_LOW(p_request->wIndex); uint8_t entityID = TU_U16_HIGH(p_request->wIndex); - (void) itf; - // We do not support any set range requests here, only current value requests TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); @@ -292,51 +399,12 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } } - return false;// Yet not implemented -} - -// Invoked when audio class specific get request received for an EP -bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - - // Page 91 in UAC2 specification - uint8_t channelNum = TU_U16_LOW(p_request->wValue); - uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t ep = TU_U16_LOW(p_request->wIndex); - - (void) channelNum; - (void) ctrlSel; - (void) ep; - - // return tud_control_xfer(rhport, p_request, &tmp, 1); - - return false;// Yet not implemented -} - -// Invoked when audio class specific get request received for an interface -bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - - // Page 91 in UAC2 specification - uint8_t channelNum = TU_U16_LOW(p_request->wValue); - uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t itf = TU_U16_LOW(p_request->wIndex); - - (void) channelNum; - (void) ctrlSel; - (void) itf; - - return false;// Yet not implemented + return false; } -// Invoked when audio class specific get request received for an entity -bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - - // Page 91 in UAC2 specification +static bool audio20_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { uint8_t channelNum = TU_U16_LOW(p_request->wValue); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - // uint8_t itf = TU_U16_LOW(p_request->wIndex); // Since we have only one audio function implemented, we do not need the itf value uint8_t entityID = TU_U16_HIGH(p_request->wIndex); // Input terminal (Microphone input) @@ -449,7 +517,82 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } } - TU_LOG2(" Unsupported entity: %d\r\n", entityID); + return false; +} + +#endif // TUD_OPT_HIGH_SPEED + +//--------------------------------------------------------------------+ +// Main Callback Functions +//--------------------------------------------------------------------+ + +// Invoked when set interface is called, typically on start/stop streaming or format change +bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + //uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); + uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); + + // Clear buffer when streaming format is changed + if (alt != 0) { + bytesPerSample = bytesPerSampleAltList[alt - 1]; + } + return true; +} + +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { + (void) rhport; + (void) pBuff; + + if (tud_audio_version() == 1) { + return audio10_set_req_ep(p_request, pBuff); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_ep(rhport, p_request); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific set request received for an entity +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_set_req_entity(p_request, pBuff); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_set_req_entity(p_request, pBuff); +#endif + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific get request received for an entity +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_entity(rhport, p_request); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_get_req_entity(rhport, p_request); +#endif + } + return false;// Yet not implemented } diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index 9a73a2cd9..49cebf9c4 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -116,22 +116,30 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX 2 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 -// 24bit in 32bit slots +// 24bit in 32bit slots (UAC2 only) #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 4 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 24 // Have a look into audio_device.h for all configurations -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer -#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! +#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +// UAC1 (Full-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(false, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example write FIFO every 1ms, so it should be 8 times larger for HS device +// UAC2 (High-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +// Maximum EP IN size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, TU_MAX(CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN)) + +// Tx flow control needs buffer size >= 4* EP size to work correctly +// Example write FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, TU_MAX(32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, 32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN)) #ifdef __cplusplus } diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index afdf95b79..69d3d2812 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -41,8 +41,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = -{ +tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = 0x0200, @@ -67,23 +66,19 @@ tusb_desc_device_t const desc_device = // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ +uint8_t const * tud_descriptor_device_cb(void) { return (uint8_t const *) &desc_device; } //--------------------------------------------------------------------+ // Configuration Descriptor //--------------------------------------------------------------------+ -enum -{ +enum { ITF_NUM_AUDIO_CONTROL = 0, ITF_NUM_AUDIO_STREAMING, ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN) - #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... @@ -97,24 +92,81 @@ enum #define EPNUM_AUDIO 0x01 #endif -uint8_t const desc_configuration[] = -{ +#define CONFIG_UAC1_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO10_MIC_ONE_CH_DESC_LEN(3)) + +uint8_t const desc_uac1_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC1_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_AUDIO10_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ 2, /*_nBitsUsedPerSample*/ 16, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, 32000, 48000, 96000) +}; + +TU_VERIFY_STATIC(sizeof(desc_uac1_configuration) == CONFIG_UAC1_TOTAL_LEN, "Incorrect size"); + +#if TUD_OPT_HIGH_SPEED +#define CONFIG_UAC2_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN) + +uint8_t const desc2_uac2_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC2_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_epin*/ 0x80 | EPNUM_AUDIO) }; -TU_VERIFY_STATIC(sizeof(desc_configuration) == CONFIG_TOTAL_LEN, "Incorrect size"); +TU_VERIFY_STATIC(sizeof(desc2_uac2_configuration) == CONFIG_UAC2_TOTAL_LEN, "Incorrect size"); + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const *tud_descriptor_device_qualifier_cb(void) { + return (uint8_t const *) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) { + (void) index;// for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_uac1_configuration : desc2_uac2_configuration; +} + +#endif// highspeed // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations - return desc_configuration; +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + if(tud_speed_get() == TUSB_SPEED_FULL) { + return desc_uac1_configuration; + } else { + return desc2_uac2_configuration; + } +#else + return desc_uac1_configuration; +#endif } //--------------------------------------------------------------------+ @@ -130,8 +182,7 @@ enum { }; // array of pointer to string descriptors -char const* string_desc_arr [] = -{ +char const* string_desc_arr [] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "PaniRCorp", // 1: Manufacturer "MicNode", // 2: Product diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index adf3305d2..c02f40cd9 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -84,7 +84,7 @@ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ @@ -94,7 +94,7 @@ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) -- cgit v1.3.1 From 56b1ce2aed825d03d3bc56a530f90c37e4ce8889 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 29 Sep 2025 23:21:06 +0200 Subject: fix descriptor walking Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 42 +++++++++++++++--------------------------- 1 file changed, 15 insertions(+), 27 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 6e982987e..65013b7e9 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -218,6 +218,7 @@ typedef struct { uint8_t rhport; uint8_t const *p_desc;// Pointer pointing to Standard AC Interface Descriptor(4.7.1) - Audio Control descriptor defining audio function + uint8_t const *p_desc_as;// Pointer pointing to 1st Standard AS Interface Descriptor(4.9.1) - Audio Streaming descriptor defining audio function #if CFG_TUD_AUDIO_ENABLE_EP_IN uint8_t ep_in; // TX audio data EP. @@ -629,8 +630,10 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // This function is called once a transmit of a feedback packet was successfully completed. Here, we get the next feedback value to be sent -static inline bool audiod_fb_send(audiod_function_t *audio) { - bool apply_correction = (TUSB_SPEED_FULL == tud_speed_get()) && audio->feedback.format_correction; +static inline bool audiod_fb_send(uint8_t func_id) { + audiod_function_t *audio = &_audiod_fct[func_id]; + bool apply_correction = tud_audio_n_version(func_id) == 1 || + (TUSB_SPEED_FULL == tud_speed_get()) && audio->feedback.format_correction; // Format the feedback value if (apply_correction) { uint8_t *fb = (uint8_t *) audio->fb_buf; @@ -910,11 +913,13 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint p_desc = tu_desc_next(p_desc); while (p_desc_end - p_desc > 0) { // Stop if: - // - Non audio streaming interface descriptor found + // - Non audio interface descriptor found // - IAD found - if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass != AUDIO_SUBCLASS_STREAMING) + if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceClass != TUSB_CLASS_AUDIO) || tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { break; + } else if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass == AUDIO_SUBCLASS_STREAMING) { + _audiod_fct[i].p_desc_as = p_desc; } total_len += p_desc[0]; p_desc = tu_desc_next(p_desc); @@ -1174,13 +1179,8 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p #endif// CFG_TUD_AUDIO_ENABLE_EP_OUT // Open new EP if necessary - EPs are only to be closed or opened for AS interfaces - Look for AS interface with correct alternate interface - uint8_t const *p_desc = tu_desc_next(audio->p_desc); - // Skip entire AC descriptor block - if (tud_audio_n_version(func_id) == 1) { - p_desc += ((audio10_desc_cs_ac_interface_n_t(1) const *) p_desc)->wTotalLength; - } else { - p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; - } + + uint8_t const *p_desc = audio->p_desc_as; // Get pointer at end uint8_t const *p_desc_end = audio->p_desc + audio->desc_length; @@ -1269,7 +1269,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p audio->ep_fb = ep_addr; audio->feedback.frame_shift = desc_ep->bInterval - 1; // Schedule first feedback transmit - audiod_fb_send(audio); + audiod_fb_send(func_id); } #else (void) is_feedback_ep; @@ -1595,7 +1595,7 @@ bool audiod_xfer_isr(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint if (audio->ep_fb == ep_addr) { // Schedule a transmit with the new value if EP is not busy // Schedule next transmission - value is changed bytud_audio_n_fb_set() in the meantime or the old value gets sent - audiod_fb_send(audio); + audiod_fb_send(func_id); return true; } #endif @@ -1757,16 +1757,9 @@ static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t * if (_audiod_fct[i].p_desc && ((tusb_desc_interface_t const *) _audiod_fct[i].p_desc)->bInterfaceNumber == itf) { // Get pointers after class specific AC descriptors and end of AC descriptors - entities are defined in between uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc);// Points to CS AC descriptor - uint8_t const *p_desc_end = p_desc; - if (tud_audio_n_version(i) == 1) { - p_desc_end += ((audio10_desc_cs_ac_interface_n_t(1) const *) p_desc)->wTotalLength; - } else { - p_desc_end += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; - } p_desc = tu_desc_next(p_desc);// Get past CS AC descriptor - // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) { + while (_audiod_fct[i].p_desc_as - p_desc > 0) { // Entity IDs are always at offset 3 if (p_desc[3] == entityID) { *func_id = i; @@ -1807,12 +1800,7 @@ static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id) { uint8_t const *p_desc_end = _audiod_fct[i].p_desc + _audiod_fct[i].desc_length; // Advance past AC descriptors - EP we look for are streaming EPs - uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc); - if (tud_audio_n_version(i) == 1) { - p_desc += ((audio10_desc_cs_ac_interface_n_t(1) const *) p_desc)->wTotalLength; - } else { - p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; - } + uint8_t const *p_desc = _audiod_fct[i].p_desc_as; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { -- cgit v1.3.1 From e463e87097edb592ca3d0d2cc3b7a17af90e5813 Mon Sep 17 00:00:00 2001 From: Mengsk Date: Tue, 30 Sep 2025 15:38:51 +0200 Subject: support UAC1 without IAD Signed-off-by: Mengsk --- src/device/usbd.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/src/device/usbd.c b/src/device/usbd.c index b1aef0b38..f1065a649 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -1087,6 +1087,28 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) #if CFG_TUD_BTH && CFG_TUD_BTH_ISO_ALT_COUNT if ( driver->open == btd_open ) assoc_itf_count = 2; #endif + + #if CFG_TUD_AUDIO + if (driver->open == audiod_open) { + // UAC1 device doesn't have IAD, needs to read AS interface count from CS AC descriptor + if (TUSB_CLASS_AUDIO == desc_itf->bInterfaceClass && + AUDIO_SUBCLASS_CONTROL == desc_itf->bInterfaceSubClass && + AUDIO_FUNC_PROTOCOL_CODE_UNDEF == desc_itf->bInterfaceProtocol) { + uint8_t const* p = tu_desc_next(p_desc); + uint8_t const* const itf_end = p_desc + remaining_len; + while (p < itf_end) { + if (TUSB_DESC_CS_INTERFACE == tu_desc_type(p) && + AUDIO10_CS_AC_INTERFACE_HEADER == ((audio10_desc_cs_ac_interface_1_t const *) p)->bDescriptorSubType) { + audio10_desc_cs_ac_interface_1_t const * p_header = (audio10_desc_cs_ac_interface_1_t const *) p; + // AC + AS interfaces + assoc_itf_count = tu_le16toh(p_header->bInCollection) + 1; + break; + } + p = tu_desc_next(p); + } + } + } + #endif } // bind (associated) interfaces to found driver -- cgit v1.3.1 From 7867fa6c7d3ebe8324c168e7177a42b8f54a5a99 Mon Sep 17 00:00:00 2001 From: Mengsk Date: Tue, 30 Sep 2025 16:02:19 +0200 Subject: Remove feedback format correction since no longer needed Signed-off-by: Mengsk --- src/class/audio/audio_device.c | 16 +++------------- src/class/audio/audio_device.h | 15 ++------------- 2 files changed, 5 insertions(+), 26 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 65013b7e9..961aa7260 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -254,7 +254,6 @@ typedef struct uint8_t frame_shift;// bInterval-1 in unit of frame (FS), micro-frame (HS) uint8_t compute_method; - bool format_correction; union { uint8_t power_of_2;// pre-computed power of 2 shift float float_const; // pre-computed float constant @@ -364,11 +363,6 @@ TU_ATTR_WEAK void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, feedback_param->method = AUDIO_FEEDBACK_METHOD_DISABLED; } -TU_ATTR_WEAK bool tud_audio_feedback_format_correction_cb(uint8_t func_id) { - (void) func_id; - return CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION; -} - TU_ATTR_WEAK TU_ATTR_FAST_FUNC void tud_audio_feedback_interval_isr(uint8_t func_id, uint32_t frame_number, uint8_t interval_shift) { (void) func_id; (void) frame_number; @@ -632,10 +626,9 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) // This function is called once a transmit of a feedback packet was successfully completed. Here, we get the next feedback value to be sent static inline bool audiod_fb_send(uint8_t func_id) { audiod_function_t *audio = &_audiod_fct[func_id]; - bool apply_correction = tud_audio_n_version(func_id) == 1 || - (TUSB_SPEED_FULL == tud_speed_get()) && audio->feedback.format_correction; + uint8_t uac_version = tud_audio_n_version(func_id); // Format the feedback value - if (apply_correction) { + if (uac_version == 1) { uint8_t *fb = (uint8_t *) audio->fb_buf; // For FS format is 10.14 @@ -660,7 +653,7 @@ static inline bool audiod_fb_send(uint8_t func_id) { // 10.14 3 3 Linux, OSX // // We send 3 bytes since sending packet larger than wMaxPacketSize is pretty ugly - return usbd_edpt_xfer(audio->rhport, audio->ep_fb, (uint8_t *) audio->fb_buf, apply_correction ? 3 : 4); + return usbd_edpt_xfer(audio->rhport, audio->ep_fb, (uint8_t *) audio->fb_buf, uac_version == 1 ? 3 : 4); } uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) { @@ -1296,9 +1289,6 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p tud_audio_feedback_params_cb(func_id, alt, &fb_param); audio->feedback.compute_method = fb_param.method; - if (TUSB_SPEED_FULL == tud_speed_get()) - audio->feedback.format_correction = tud_audio_feedback_format_correction_cb(func_id); - // Minimal/Maximum value in 16.16 format for full speed (1ms per frame) or high speed (125 us per frame) uint32_t const frame_div = (TUSB_SPEED_FULL == tud_speed_get()) ? 1000 : 8000; audio->feedback.min_value = ((fb_param.sample_freq - 1) / frame_div) << 16; diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index d2d794053..39212472a 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -163,12 +163,6 @@ #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 0 // Feedback - 0 or 1 #endif -// Enable/disable conversion from 16.16 to 10.14 format on full-speed devices. See tud_audio_n_fb_set(). -// Can be override by tud_audio_feedback_format_correction_cb() -#ifndef CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION -#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION 0 // 0 or 1 -#endif - // Enable/disable interrupt EP (required for notifying host of control changes) #ifndef CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP #define CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP 0 // Feedback - 0 or 1 @@ -286,9 +280,8 @@ bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t fu // This function is used to provide data rate feedback from an asynchronous sink. Feedback value will be sent at FB endpoint interval till it's changed. // -// The feedback format is specified to be 16.16 for HS and 10.14 for FS devices (see Universal Serial Bus Specification Revision 2.0 5.12.4.2). By default, -// the choice of format is left to the caller and feedback argument is sent as-is. If CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION is set or tud_audio_feedback_format_correction_cb() -// return true, then tinyusb expects 16.16 format and handles the conversion to 10.14 on FS. +// The feedback format is specified to be 16.16 for HS and 10.14 for FS devices (see Universal Serial Bus Specification Revision 2.0 5.12.4.2). +// For simplicity, this function always uses 16.16 format. For FS devices, the driver will automatically convert the value to 10.14 format. // // Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 devices. On Linux and it seems the // driver can work with either format. @@ -340,10 +333,6 @@ void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, audio_feedba // frame_number : current SOF count // interval_shift: number of bit shift i.e log2(interval) from Feedback endpoint descriptor TU_ATTR_FAST_FUNC void tud_audio_feedback_interval_isr(uint8_t func_id, uint32_t frame_number, uint8_t interval_shift); - -// (Full-Speed only) Callback to set feedback format correction is applied or not, -// default to CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION if not implemented. -bool tud_audio_feedback_format_correction_cb(uint8_t func_id); #endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -- cgit v1.3.1 From d5108589b6f3bb1139523765c9cc625c56b08832 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 30 Sep 2025 23:16:44 +0200 Subject: Minor fixes Signed-off-by: HiFiPhile --- examples/device/audio_test_multi_rate/src/main.c | 4 ++-- examples/device/uac2_speaker_fb/src/common_types.h | 2 +- examples/device/uac2_speaker_fb/src/main.c | 4 ++-- src/class/audio/audio_device.c | 11 ++++------- src/common/tusb_compiler.h | 2 +- src/device/usbd.c | 2 +- 6 files changed, 11 insertions(+), 14 deletions(-) diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 9e9c32e8d..55a649613 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -60,7 +60,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; // Audio controls // Current states bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 -uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// +1 for master channel 0 +int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// +1 for master channel 0 uint32_t sampFreq; uint8_t bytesPerSample; uint8_t clkValid; @@ -367,7 +367,7 @@ static bool audio20_set_req_entity(tusb_control_request_t const *p_request, uint // Request uses format layout 2 TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (int16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; diff --git a/examples/device/uac2_speaker_fb/src/common_types.h b/examples/device/uac2_speaker_fb/src/common_types.h index 174e26671..b79ae2fd0 100644 --- a/examples/device/uac2_speaker_fb/src/common_types.h +++ b/examples/device/uac2_speaker_fb/src/common_types.h @@ -41,7 +41,7 @@ typedef struct { uint32_t sample_rate; uint8_t alt_settings; - int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; + uint8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; uint16_t fifo_size; uint16_t fifo_count; diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 936da4c80..aef933936 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -74,7 +74,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; // Audio controls // Current states -int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 +uint8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1];// +1 for master channel 0 // Buffer for speaker data @@ -212,7 +212,7 @@ static bool audio10_set_req_entity(tusb_control_request_t const *p_request, uint switch (p_request->bRequest) { case AUDIO10_CS_REQ_SET_CUR: // Only 1st form is supported - TU_VERIFY(p_request->wLength ==1); + TU_VERIFY(p_request->wLength == 1); mute[channelNum] = pBuff[0]; diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 961aa7260..9fa55acc5 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -460,7 +460,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t *func_id); static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id); static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id); -static uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); +static inline uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t const *p_desc); @@ -1810,7 +1810,7 @@ static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t c p_desc = tu_desc_next(p_desc);// Exclude standard AS interface descriptor of current alternate interface descriptor - if (tud_audio_n_version(audio - _audiod_fct) == 1) { + if (tud_audio_n_version(audiod_get_audio_fct_idx(audio)) == 1) { p_desc = tu_desc_next(p_desc);// Exclude Class-Specific AS Interface Descriptor(4.5.2) to get to format type descriptor if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE) { audio->format_type_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bFormatType; @@ -1910,11 +1910,8 @@ static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t da #endif // No security checks here - internal function only which should always succeed -static uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio) { - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO; cnt++) { - if (&_audiod_fct[cnt] == audio) return cnt; - } - return 0; +static inline uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio) { + return (uint8_t) (audio - _audiod_fct); } #endif // (CFG_TUD_ENABLED && CFG_TUD_AUDIO) diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index b0dae6488..9c16ac3df 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -118,7 +118,7 @@ #define _TU_ARGS_APPLY_7(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1) _s _TU_ARGS_APPLY_6(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7) #define _TU_ARGS_APPLY_8(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1) _s _TU_ARGS_APPLY_7(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7, _a8) -// Apply an macro X to each of the arguments and expand the result wtih comma +// Apply an macro X to each of the arguments and expand the result with comma #define TU_ARGS_APPLY_EXPAND(_X, ...) TU_XSTRCAT(_TU_ARGS_APPLY_EXPAND_, TU_ARGS_NUM(__VA_ARGS__))(_X, __VA_ARGS__) #define _TU_ARGS_APPLY_EXPAND_1(_X, _a1) _X(_a1) diff --git a/src/device/usbd.c b/src/device/usbd.c index f1065a649..9d241c168 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -1101,7 +1101,7 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) AUDIO10_CS_AC_INTERFACE_HEADER == ((audio10_desc_cs_ac_interface_1_t const *) p)->bDescriptorSubType) { audio10_desc_cs_ac_interface_1_t const * p_header = (audio10_desc_cs_ac_interface_1_t const *) p; // AC + AS interfaces - assoc_itf_count = tu_le16toh(p_header->bInCollection) + 1; + assoc_itf_count = p_header->bInCollection + 1; break; } p = tu_desc_next(p); -- cgit v1.3.1 From 1ee113e0e7e12eb9d7969e58a9410feca6db3976 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 1 Oct 2025 09:42:33 +0200 Subject: better EP type detection Signed-off-by: HiFiPhile --- src/class/audio/audio.h | 7 ++++++- src/class/audio/audio_device.c | 12 ++++++------ 2 files changed, 12 insertions(+), 7 deletions(-) diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index 1ab0739b5..6042d7cf9 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -489,7 +489,12 @@ typedef struct TU_ATTR_PACKED { uint8_t bLength; ///< Size of this descriptor in bytes: 9. uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_ENDPOINT. uint8_t bEndpointAddress;///< The address of the endpoint on the USB device described by this descriptor. - uint8_t bmAttributes; ///< Endpoint attributes when configured using the bEndpointAddress field. + struct TU_ATTR_PACKED { + uint8_t xfer : 2; // Control, ISO, Bulk, Interrupt + uint8_t sync : 2; // None, Asynchronous, Adaptive, Synchronous + uint8_t usage : 2; // Data, Feedback, Implicit feedback + uint8_t : 2; + } bmAttributes; uint16_t wMaxPacketSize; ///< Maximum packet size this endpoint is capable of sending or receiving when this configuration is selected. uint8_t bInterval; ///< Interval for polling endpoint for data transfers. uint8_t bRefresh; ///< The rate at which the endpoint is refreshed. diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 9fa55acc5..e0d25bfc8 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -948,12 +948,12 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint if (tud_audio_n_version(i) == 1) { // UAC1: Use bRefresh field to distinguish endpoint types audio10_desc_as_iso_data_ep_t const *desc_ep_uac1 = (audio10_desc_as_iso_data_ep_t const *) p_desc; - is_feedback_ep = (desc_ep_uac1->bRefresh > 0); - is_data_ep = (desc_ep_uac1->bRefresh == 0); + is_data_ep = (desc_ep_uac1->bmAttributes.sync != TUSB_ISO_EP_ATT_NO_SYNC); + is_feedback_ep = (desc_ep_uac1->bmAttributes.sync == TUSB_ISO_EP_ATT_NO_SYNC); } else { // UAC2: Use bmAttributes.usage to distinguish endpoint types - is_feedback_ep = (desc_ep->bmAttributes.usage == 1); is_data_ep = (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2); + is_feedback_ep = (desc_ep->bmAttributes.usage == 1); } #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -1204,12 +1204,12 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p if (tud_audio_n_version(func_id) == 1) { // UAC1: Use bRefresh field to distinguish endpoint types audio10_desc_as_iso_data_ep_t const *desc_ep_uac1 = (audio10_desc_as_iso_data_ep_t const *) p_desc; - is_feedback_ep = (desc_ep_uac1->bRefresh > 0); - is_data_ep = (desc_ep_uac1->bRefresh == 0); + is_data_ep = (desc_ep_uac1->bmAttributes.sync != TUSB_ISO_EP_ATT_NO_SYNC); + is_feedback_ep = (desc_ep_uac1->bmAttributes.sync == TUSB_ISO_EP_ATT_NO_SYNC); } else { // UAC2: Use bmAttributes.usage to distinguish endpoint types - is_feedback_ep = (desc_ep->bmAttributes.usage == 1); is_data_ep = (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2); + is_feedback_ep = (desc_ep->bmAttributes.usage == 1); } //TODO: We need to set EP non busy since this is not taken care of right now in ep_close() - THIS IS A WORKAROUND! -- cgit v1.3.1 From 1cec005f8fe9eeb0cfa8e42af9245449c18ec61b Mon Sep 17 00:00:00 2001 From: Karl Palsson Date: Wed, 1 Oct 2025 10:43:22 +0000 Subject: examples/device/*_freertos: expand stack size when needed All four of these examples immediately crashed on stack overflow when connected, at least on a FRDM_K64F board. In 46fd82299040f the default freertos stack size was increased, but _only_ for stm32? Perhaps either all platform examples need the default increased, rather than increasing the problem task stacks as is done here. Signed-off-by: Karl Palsson --- examples/device/cdc_msc_freertos/src/main.c | 2 +- examples/device/hid_composite_freertos/src/main.c | 2 +- examples/device/midi_test_freertos/src/main.c | 2 +- examples/host/cdc_msc_hid_freertos/src/main.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 69f2435ba..be8482f1c 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -37,7 +37,7 @@ #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif -#define CDC_STACK_SIZE configMINIMAL_STACK_SIZE +#define CDC_STACK_SIZE 2*configMINIMAL_STACK_SIZE #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE //--------------------------------------------------------------------+ diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 0eb13add3..acc8f69a0 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -53,7 +53,7 @@ #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif -#define HID_STACK_SZIE configMINIMAL_STACK_SIZE +#define HID_STACK_SZIE 2*configMINIMAL_STACK_SIZE //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES diff --git a/examples/device/midi_test_freertos/src/main.c b/examples/device/midi_test_freertos/src/main.c index 9dd66c526..070906d0d 100644 --- a/examples/device/midi_test_freertos/src/main.c +++ b/examples/device/midi_test_freertos/src/main.c @@ -48,7 +48,7 @@ #endif #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE -#define MIDI_STACK_SIZE configMINIMAL_STACK_SIZE +#define MIDI_STACK_SIZE 2*configMINIMAL_STACK_SIZE // static task #if configSUPPORT_STATIC_ALLOCATION diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index d498c1b57..4a9031278 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -34,7 +34,7 @@ #define USBH_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled - #define USBH_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) + #define USBH_STACK_SIZE (4*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif -- cgit v1.3.1 From cd9266bf3dc331684aff2146e0484e8cd59efadf Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 1 Oct 2025 21:21:04 +0200 Subject: Add note about bRefresh value Signed-off-by: HiFiPhile --- .../device/uac2_speaker_fb/src/usb_descriptors.h | 35 +++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index 4ae6ab616..b0ec60ea1 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -132,6 +132,39 @@ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Standard AS Isochronous Synch Endpoint Descriptor (4.6.2.1) */\ - TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(/*_ep*/ _epfb, /*_bRefresh*/ 4) + TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(/*_ep*/ _epfb, /*_bRefresh*/ 0) + +//---------------------------------------------------------------------------+ +// UAC1 Isochronous Synch Endpoint bRefresh Workaround +// +// bRefresh value is set to 0, while UAC1 spec requires it to be between +// 1 (2 ms) and 9 (512 ms) +// +// This value has been tested to work with Windows, macOS and Linux. +// +// Rationale: +// Some USB device controllers (e.g. Synopsys DWC2) require a known transfer +// interval to manually schedule isochronous IN transfers. For data isochronous +// endpoints, the bInterval field in the endpoint descriptor is used. However, +// for synch endpoint it's unclear which field the host uses to determine the +// transfer interval. Windows and macOS use bRefresh, while Linux uses bInterval. +// +// Since bInterval is fixed to 1, if bRefresh is set to 2 then Windows and macOS +// will schedule the feedback transfer every 4 ms, but Linux will schedule it +// every 1 ms. DWC2 controller cannot handle this discrepancy without knwowing +// the actual interval, therefore we set bRefresh to 0 to let the transfer +// execute every 1 ms, which is the same as bInterval. +// +// Rant: +// WTF USB-IF? Why have two fields that mean the same thing? Why not just use +// bInterval for both data and synch endpoints? Why is bRefresh even necessary? +// +// Note: +// For the moment DWC2 driver doesn't have proper support for bInterval > 1 +// for isochronous IN endpoints. The implementation would be complex and CPU +// intensive (cfr. +// https://github.com/torvalds/linux/blob/master/drivers/usb/dwc2/gadget.c) +// It MAY work in some cases if you are lucky, but it's not guaranteed. +//---------------------------------------------------------------------------+ #endif -- cgit v1.3.1 From 12a2fe3078c9bb2c23ea244d5214430d3fe27725 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 2 Oct 2025 15:34:14 +0200 Subject: Update feedback params on frequency change Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 102 ++++++++++++++++++++++++----------------- 1 file changed, 61 insertions(+), 41 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index e0d25bfc8..6cf4d9511 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -469,6 +469,7 @@ static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t da #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP +static bool audiod_fb_params_prepare(uint8_t func_id, uint8_t alt); static bool audiod_set_fb_params_freq(audiod_function_t *audio, uint32_t sample_freq, uint32_t mclk_freq); static void audiod_fb_fifo_count_update(audiod_function_t *audio, uint16_t lvl_new); #endif @@ -1282,47 +1283,8 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p TU_VERIFY(tud_audio_set_itf_cb(rhport, p_request)); #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - // Prepare feedback computation if endpoint is available - if (audio->ep_fb != 0) { - audio_feedback_params_t fb_param; - - tud_audio_feedback_params_cb(func_id, alt, &fb_param); - audio->feedback.compute_method = fb_param.method; - - // Minimal/Maximum value in 16.16 format for full speed (1ms per frame) or high speed (125 us per frame) - uint32_t const frame_div = (TUSB_SPEED_FULL == tud_speed_get()) ? 1000 : 8000; - audio->feedback.min_value = ((fb_param.sample_freq - 1) / frame_div) << 16; - audio->feedback.max_value = (fb_param.sample_freq / frame_div + 1) << 16; - - switch (fb_param.method) { - case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: - case AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT: - case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: - audiod_set_fb_params_freq(audio, fb_param.sample_freq, fb_param.frequency.mclk_freq); - break; - - case AUDIO_FEEDBACK_METHOD_FIFO_COUNT: { - // Initialize the threshold level to half filled - uint16_t fifo_lvl_thr = tu_fifo_depth(&audio->ep_out_ff) / 2; - audio->feedback.compute.fifo_count.fifo_lvl_thr = fifo_lvl_thr; - audio->feedback.compute.fifo_count.fifo_lvl_avg = ((uint32_t) fifo_lvl_thr) << 16; - // Avoid 64bit division - uint32_t nominal = ((fb_param.sample_freq / 100) << 16) / (frame_div / 100); - audio->feedback.compute.fifo_count.nom_value = nominal; - audio->feedback.compute.fifo_count.rate_const[0] = (uint16_t) ((audio->feedback.max_value - nominal) / fifo_lvl_thr); - audio->feedback.compute.fifo_count.rate_const[1] = (uint16_t) ((nominal - audio->feedback.min_value) / fifo_lvl_thr); - // On HS feedback is more sensitive since packet size can vary every MSOF, could cause instability - if (tud_speed_get() == TUSB_SPEED_HIGH) { - audio->feedback.compute.fifo_count.rate_const[0] /= 8; - audio->feedback.compute.fifo_count.rate_const[1] /= 8; - } - } break; - - // nothing to do - default: - break; - } - } + // Prepare feedback computation parameters + TU_VERIFY(audiod_fb_params_prepare(func_id, alt)); #endif// CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // We are done - abort loop @@ -1410,6 +1372,16 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const } } } +#endif +#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + if (tud_audio_n_version(func_id) == 1) { + if (_audiod_fct[func_id].ep_out == ep) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + if (ctrlSel == AUDIO10_EP_CTRL_SAMPLING_FREQ && p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { + audiod_fb_params_prepare(func_id, _audiod_fct[func_id].ep_out_alt); + } + } + } #endif // Invoke callback return tud_audio_set_req_ep_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); @@ -1597,6 +1569,54 @@ bool audiod_xfer_isr(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP +static bool audiod_fb_params_prepare(uint8_t func_id, uint8_t alt) { + audiod_function_t *audio = &_audiod_fct[func_id]; + + // Prepare feedback computation if endpoint is available + if (audio->ep_fb != 0) { + audio_feedback_params_t fb_param; + + tud_audio_feedback_params_cb(func_id, alt, &fb_param); + audio->feedback.compute_method = fb_param.method; + + // Minimal/Maximum value in 16.16 format for full speed (1ms per frame) or high speed (125 us per frame) + uint32_t const frame_div = (TUSB_SPEED_FULL == tud_speed_get()) ? 1000 : 8000; + audio->feedback.min_value = ((fb_param.sample_freq - 1) / frame_div) << 16; + audio->feedback.max_value = (fb_param.sample_freq / frame_div + 1) << 16; + + switch (fb_param.method) { + case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: + case AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT: + case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: + TU_VERIFY(audiod_set_fb_params_freq(audio, fb_param.sample_freq, fb_param.frequency.mclk_freq)); + break; + + case AUDIO_FEEDBACK_METHOD_FIFO_COUNT: { + // Initialize the threshold level to half filled + uint16_t fifo_lvl_thr = tu_fifo_depth(&audio->ep_out_ff) / 2; + audio->feedback.compute.fifo_count.fifo_lvl_thr = fifo_lvl_thr; + audio->feedback.compute.fifo_count.fifo_lvl_avg = ((uint32_t) fifo_lvl_thr) << 16; + // Avoid 64bit division + uint32_t nominal = ((fb_param.sample_freq / 100) << 16) / (frame_div / 100); + audio->feedback.compute.fifo_count.nom_value = nominal; + audio->feedback.compute.fifo_count.rate_const[0] = (uint16_t) ((audio->feedback.max_value - nominal) / fifo_lvl_thr); + audio->feedback.compute.fifo_count.rate_const[1] = (uint16_t) ((nominal - audio->feedback.min_value) / fifo_lvl_thr); + // On HS feedback is more sensitive since packet size can vary every MSOF, could cause instability + if (tud_speed_get() == TUSB_SPEED_HIGH) { + audio->feedback.compute.fifo_count.rate_const[0] /= 8; + audio->feedback.compute.fifo_count.rate_const[1] /= 8; + } + } break; + + // nothing to do + default: + break; + } + } + + return true; +} + static bool audiod_set_fb_params_freq(audiod_function_t *audio, uint32_t sample_freq, uint32_t mclk_freq) { // Check if frame interval is within sane limits // The interval value n_frames was taken from the descriptors within audiod_set_interface() -- cgit v1.3.1 From 01477c4c516fb0ac2f0bbef6352f98101b5d87d2 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 2 Oct 2025 20:32:03 +0200 Subject: cleanup Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 59 +++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 33 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 6cf4d9511..bac1223cd 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -470,7 +470,6 @@ static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t da #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP static bool audiod_fb_params_prepare(uint8_t func_id, uint8_t alt); -static bool audiod_set_fb_params_freq(audiod_function_t *audio, uint32_t sample_freq, uint32_t mclk_freq); static void audiod_fb_fifo_count_update(audiod_function_t *audio, uint16_t lvl_new); #endif @@ -1587,9 +1586,32 @@ static bool audiod_fb_params_prepare(uint8_t func_id, uint8_t alt) { switch (fb_param.method) { case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: case AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT: - case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: - TU_VERIFY(audiod_set_fb_params_freq(audio, fb_param.sample_freq, fb_param.frequency.mclk_freq)); - break; + case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: { + // Check if frame interval is within sane limits + // The interval value n_frames was taken from the descriptors within audiod_set_interface() + + // n_frames_min is ceil(2^10 * f_s / f_m) for full speed and ceil(2^13 * f_s / f_m) for high speed + // this lower limit ensures the measures feedback value has sufficient precision + uint32_t const k = (TUSB_SPEED_FULL == tud_speed_get()) ? 10 : 13; + uint32_t const n_frame = (1UL << audio->feedback.frame_shift); + + if ((((1UL << k) * fb_param.sample_freq / fb_param.frequency.mclk_freq) + 1) > n_frame) { + TU_LOG1(" UAC2 feedback interval too small\r\n"); + TU_BREAKPOINT(); + return false; + } + + // Check if parameters really allow for a power of two division + if ((fb_param.frequency.mclk_freq % fb_param.sample_freq) == 0 && tu_is_power_of_two(fb_param.frequency.mclk_freq / fb_param.sample_freq)) { + audio->feedback.compute_method = AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2; + audio->feedback.compute.power_of_2 = (uint8_t) (16 - (audio->feedback.frame_shift - 1) - tu_log2(fb_param.frequency.mclk_freq / fb_param.sample_freq)); + } else if (audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT) { + audio->feedback.compute.float_const = (float) fb_param.sample_freq / (float) fb_param.frequency.mclk_freq * (1UL << (16 - (audio->feedback.frame_shift - 1))); + } else { + audio->feedback.compute.fixed.sample_freq = fb_param.sample_freq; + audio->feedback.compute.fixed.mclk_freq = fb_param.frequency.mclk_freq; + } + } break; case AUDIO_FEEDBACK_METHOD_FIFO_COUNT: { // Initialize the threshold level to half filled @@ -1617,35 +1639,6 @@ static bool audiod_fb_params_prepare(uint8_t func_id, uint8_t alt) { return true; } -static bool audiod_set_fb_params_freq(audiod_function_t *audio, uint32_t sample_freq, uint32_t mclk_freq) { - // Check if frame interval is within sane limits - // The interval value n_frames was taken from the descriptors within audiod_set_interface() - - // n_frames_min is ceil(2^10 * f_s / f_m) for full speed and ceil(2^13 * f_s / f_m) for high speed - // this lower limit ensures the measures feedback value has sufficient precision - uint32_t const k = (TUSB_SPEED_FULL == tud_speed_get()) ? 10 : 13; - uint32_t const n_frame = (1UL << audio->feedback.frame_shift); - - if ((((1UL << k) * sample_freq / mclk_freq) + 1) > n_frame) { - TU_LOG1(" UAC2 feedback interval too small\r\n"); - TU_BREAKPOINT(); - return false; - } - - // Check if parameters really allow for a power of two division - if ((mclk_freq % sample_freq) == 0 && tu_is_power_of_two(mclk_freq / sample_freq)) { - audio->feedback.compute_method = AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2; - audio->feedback.compute.power_of_2 = (uint8_t) (16 - (audio->feedback.frame_shift - 1) - tu_log2(mclk_freq / sample_freq)); - } else if (audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT) { - audio->feedback.compute.float_const = (float) sample_freq / (float) mclk_freq * (1UL << (16 - (audio->feedback.frame_shift - 1))); - } else { - audio->feedback.compute.fixed.sample_freq = sample_freq; - audio->feedback.compute.fixed.mclk_freq = mclk_freq; - } - - return true; -} - static void audiod_fb_fifo_count_update(audiod_function_t *audio, uint16_t lvl_new) { /* Low-pass (averaging) filter */ uint32_t lvl = audio->feedback.compute.fifo_count.fifo_lvl_avg; -- cgit v1.3.1 From 4ae26db4a9fb462cf871cdf585ba761f23cab6b4 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 2 Oct 2025 20:55:25 +0200 Subject: Fix feedback param lag Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index bac1223cd..1e001479c 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -1372,8 +1372,12 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const } } #endif + + // Invoke callback + bool ret = tud_audio_set_req_ep_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); + #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - if (tud_audio_n_version(func_id) == 1) { + if (ret && tud_audio_n_version(func_id) == 1) { if (_audiod_fct[func_id].ep_out == ep) { uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (ctrlSel == AUDIO10_EP_CTRL_SAMPLING_FREQ && p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { @@ -1382,8 +1386,7 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const } } #endif - // Invoke callback - return tud_audio_set_req_ep_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); + return ret; } break; // Unknown/Unsupported recipient default: -- cgit v1.3.1 From d322207441d55f636be911899f1c7928ba6b00b7 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 2 Oct 2025 23:59:24 +0200 Subject: Add UAC1 support to uac2_headset example Signed-off-by: HiFiPhile --- examples/device/uac2_headset/src/main.c | 277 +++++++++++++++++++-- examples/device/uac2_headset/src/tusb_config.h | 42 ++-- examples/device/uac2_headset/src/usb_descriptors.c | 79 +++++- examples/device/uac2_headset/src/usb_descriptors.h | 107 +++++++- src/class/audio/audio_device.c | 4 +- 5 files changed, 448 insertions(+), 61 deletions(-) diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 31b2f3ee3..f6d3c041d 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -141,8 +141,185 @@ void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } +//--------------------------------------------------------------------+ +// Audio Callback Functions +//--------------------------------------------------------------------+ + +//--------------------------------------------------------------------+ +// UAC1 Helper Functions +//--------------------------------------------------------------------+ + +static bool audio10_set_req_ep(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { + // Request uses 3 bytes + TU_VERIFY(p_request->wLength == 3); + + current_sample_rate = tu_unaligned_read32(pBuff) & 0x00FFFFFF; + + TU_LOG2("EP set current freq: %" PRIu32 "\r\n", current_sample_rate); + + return true; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} + +static bool audio10_get_req_ep(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_GET_CUR) { + TU_LOG2("EP get current freq\r\n"); + + uint8_t freq[3]; + freq[0] = (uint8_t) (current_sample_rate & 0xFF); + freq[1] = (uint8_t) ((current_sample_rate >> 8) & 0xFF); + freq[2] = (uint8_t) ((current_sample_rate >> 16) & 0xFF); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, freq, sizeof(freq)); + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} + +static bool audio10_set_req_entity(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our speaker feature unit + if (entityID == UAC1_ENTITY_SPK_FEATURE_UNIT) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength == 1); + + mute[channelNum] = pBuff[0]; + + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength == 2); + + volume[channelNum] = (int16_t)tu_unaligned_read16(pBuff) / 256; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +static bool audio10_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our speaker feature unit + if (entityID == UAC1_ENTITY_SPK_FEATURE_UNIT) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); + + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_GET_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + { + int16_t vol = (int16_t) volume[channelNum]; + vol = vol * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &vol, sizeof(vol)); + } + + case AUDIO10_CS_REQ_GET_MIN: + TU_LOG2(" Get Volume min of channel: %u\r\n", channelNum); + { + int16_t min = -90; // -90 dB + min = min * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &min, sizeof(min)); + } + + case AUDIO10_CS_REQ_GET_MAX: + TU_LOG2(" Get Volume max of channel: %u\r\n", channelNum); + { + int16_t max = 30; // +30 dB + max = max * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &max, sizeof(max)); + } + + case AUDIO10_CS_REQ_GET_RES: + TU_LOG2(" Get Volume res of channel: %u\r\n", channelNum); + { + int16_t res = 1; // 1 dB + res = res * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &res, sizeof(res)); + } + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +//--------------------------------------------------------------------+ +// UAC2 Helper Functions +//--------------------------------------------------------------------+ + +#if TUD_OPT_HIGH_SPEED + // Helper for clock get requests -static bool tud_audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { @@ -177,7 +354,7 @@ static bool tud_audio20_clock_get_request(uint8_t rhport, audio20_control_reques } // Helper for clock set requests -static bool tud_audio20_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { +static bool audio20_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); @@ -199,7 +376,7 @@ static bool tud_audio20_clock_set_request(uint8_t rhport, audio20_control_reques } // Helper for feature unit get requests -static bool tud_audio20_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool audio20_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { @@ -227,7 +404,7 @@ static bool tud_audio20_feature_unit_get_request(uint8_t rhport, audio20_control } // Helper for feature unit set requests -static bool tud_audio20_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { +static bool audio20_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); @@ -256,25 +433,72 @@ static bool tud_audio20_feature_unit_set_request(uint8_t rhport, audio20_control } } -//--------------------------------------------------------------------+ -// Application Callback API Implementations -//--------------------------------------------------------------------+ +static bool audio20_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; + + if (request->bEntityID == UAC2_ENTITY_CLOCK) + return audio20_clock_get_request(rhport, request); + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + return audio20_feature_unit_get_request(rhport, request); + else { + TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + } + return false; +} + +static bool audio20_set_req_entity(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; + + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + return audio20_feature_unit_set_request(rhport, request, buf); + if (request->bEntityID == UAC2_ENTITY_CLOCK) + return audio20_clock_set_request(rhport, request, buf); + TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + + return false; +} + +#endif // TUD_OPT_HIGH_SPEED + +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { + (void) rhport; + (void) pBuff; + + if (tud_audio_version() == 1) { + return audio10_set_req_ep(p_request, pBuff); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_ep(rhport, p_request); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + if (tud_audio_version() == 1) { - // No entity in UAC1 - } else { - audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; - - if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio20_clock_get_request(rhport, request); - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) - return tud_audio20_feature_unit_get_request(rhport, request); - else { - TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", - request->bEntityID, request->bControlSelector, request->bRequest); - } + return audio10_get_req_entity(rhport, p_request); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_get_req_entity(rhport, p_request); +#endif } return false; @@ -282,14 +506,15 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Invoked when audio class specific set request received for an entity bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { - audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; + (void) rhport; - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) - return tud_audio20_feature_unit_set_request(rhport, request, buf); - if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio20_clock_set_request(rhport, request, buf); - TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", - request->bEntityID, request->bControlSelector, request->bRequest); + if (tud_audio_version() == 1) { + return audio10_set_req_entity(p_request, buf); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_set_req_entity(rhport, p_request, buf); +#endif + } return false; } diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index 5e6211cc0..339fb81a6 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -124,37 +124,45 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX 2 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 -#if defined(__RX__) -// 8bit in 8bit slots -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX 8 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 8 -#else -// 24bit in 32bit slots +// 24bit in 32bit slots (UAC2 only) #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 4 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX 24 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX 4 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 24 -#endif // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +// UAC1 (Full-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(false, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +// UAC2 (High-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +// Maximum EP IN size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, TU_MAX(CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN)) -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device +// Tx flow control needs buffer size >= 4* EP size to work correctly +// Example write FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, TU_MAX(32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, 32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN)) // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +// UAC1 (Full-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(false, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) + +// UAC2 (High-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) + +// Maximum EP OUT size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, TU_MAX(CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_OUT)) -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device +// Rx flow control needs buffer size >= 4* EP size to work correctly +// Example read FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, TU_MAX(32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_OUT, 32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_OUT)) // Size of control request buffer #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index bc9160d5e..b7e024e9e 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -110,22 +110,93 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_AUDIO_INT 0x02 #endif -uint8_t const desc_configuration[] = +#define CONFIG_UAC1_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO10_HEADSET_STEREO_DESC_LEN(2)) + +uint8_t const desc_uac1_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC1_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, bytes per sample RX/TX, bits used per sample RX/TX, EP Out & EP In address, EP sizes, sample rate + TUD_AUDIO10_HEADSET_STEREO_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 2, \ + CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX, \ + CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX, \ + EPNUM_AUDIO_OUT, CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, \ + EPNUM_AUDIO_IN | 0x80, CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, \ + 44100, 48000) +}; + +TU_VERIFY_STATIC(sizeof(desc_uac1_configuration) == CONFIG_UAC1_TOTAL_LEN, "Incorrect size"); + +#if TUD_OPT_HIGH_SPEED + +#define CONFIG_UAC2_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_HEADSET_STEREO_DESC_LEN) + +uint8_t const desc_uac2_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC2_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80, EPNUM_AUDIO_INT | 0x80) + TUD_AUDIO20_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80, EPNUM_AUDIO_INT | 0x80) +}; + +TU_VERIFY_STATIC(sizeof(desc_uac2_configuration) == CONFIG_UAC2_TOTAL_LEN, "Incorrect size"); + + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = 0x0200, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 }; +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const *tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const *) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_uac1_configuration : desc_uac2_configuration; +} +#endif + // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void)index; // for multiple configurations - return desc_configuration; +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + if(tud_speed_get() == TUSB_SPEED_FULL) { + return desc_uac1_configuration; + } else { + return desc_uac2_configuration; + } +#else + return desc_uac1_configuration; +#endif } //--------------------------------------------------------------------+ diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index 465fa6035..b6ebe2ae4 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -26,7 +26,17 @@ #ifndef _USB_DESCRIPTORS_H_ #define _USB_DESCRIPTORS_H_ -// #include "tusb.h" +enum +{ + ITF_NUM_AUDIO_CONTROL = 0, + ITF_NUM_AUDIO_STREAMING_SPK, + ITF_NUM_AUDIO_STREAMING_MIC, + ITF_NUM_TOTAL +}; + +//--------------------------------------------------------------------+ +// UAC2 DESCRIPTOR TEMPLATES +//--------------------------------------------------------------------+ // Unit numbers are arbitrary selected #define UAC2_ENTITY_CLOCK 0x04 @@ -38,15 +48,7 @@ #define UAC2_ENTITY_MIC_INPUT_TERMINAL 0x11 #define UAC2_ENTITY_MIC_OUTPUT_TERMINAL 0x13 -enum -{ - ITF_NUM_AUDIO_CONTROL = 0, - ITF_NUM_AUDIO_STREAMING_SPK, - ITF_NUM_AUDIO_STREAMING_MIC, - ITF_NUM_TOTAL -}; - -#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ +#define TUD_AUDIO20_HEADSET_STEREO_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + TUD_AUDIO20_DESC_STD_AC_LEN\ + TUD_AUDIO20_DESC_CS_AC_LEN\ + TUD_AUDIO20_DESC_CLK_SRC_LEN\ @@ -85,7 +87,7 @@ enum + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) -#define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin, _epint) \ +#define TUD_AUDIO20_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin, _epint) \ /* Standard Interface Association Descriptor (IAD) */\ TUD_AUDIO20_DESC_IAD(/*_firstitf*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ @@ -95,7 +97,7 @@ enum /* Clock Source Descriptor(4.7.2.1) */\ TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_stridx*/ 0x00, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS)),\ /* Output Terminal Descriptor(4.7.2.5) */\ @@ -103,7 +105,7 @@ enum /* Input Terminal Descriptor(4.7.2.4) */\ TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */\ TUD_AUDIO20_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ /* Standard AS Interface Descriptor(4.9.1) */\ @@ -155,4 +157,83 @@ enum /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) +//--------------------------------------------------------------------+ +// UAC1 DESCRIPTOR TEMPLATES +//--------------------------------------------------------------------+ + +// UAC1 entity IDs for speaker and microphone +// Speaker path +#define UAC1_ENTITY_SPK_INPUT_TERMINAL 0x01 +#define UAC1_ENTITY_SPK_FEATURE_UNIT 0x02 +#define UAC1_ENTITY_SPK_OUTPUT_TERMINAL 0x03 +// Microphone path +#define UAC1_ENTITY_MIC_INPUT_TERMINAL 0x11 +#define UAC1_ENTITY_MIC_OUTPUT_TERMINAL 0x13 + +#define TUD_AUDIO10_HEADSET_STEREO_DESC_LEN(_nfreqs) (\ + +TUD_AUDIO10_DESC_STD_AC_LEN\ + + TUD_AUDIO10_DESC_CS_AC_LEN(2)\ + + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + /* Interface 1, Alternate 0 (speaker) */\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + /* Interface 1, Alternate 1 (speaker) */\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN\ + /* Interface 2, Alternate 0 (microphone) */\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + /* Interface 2, Alternate 1 (microphone) */\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN) + + +#define TUD_AUDIO10_HEADSET_STEREO_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample_RX, _nBitsUsedPerSample_RX, _nBytesPerSample_TX, _nBitsUsedPerSample_TX, _epout, _epoutsize, _epin, _epinsize, ...) \ + /* Standard AC Interface Descriptor(4.3.1) */\ + TUD_AUDIO10_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + /* Class-Specific AC Interface Header Descriptor(4.3.2) */\ + TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ (TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1)+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN), /*_itf*/ ((_itfnum)+1), ((_itfnum)+2)),\ + /* Speaker Input Terminal Descriptor(4.3.2.1) */\ + TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_nchannels*/ 0x02, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ + /* Speaker Feature Unit Descriptor(4.3.2.5) */\ + TUD_AUDIO10_DESC_FEATURE_UNIT(/*_unitid*/ UAC1_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_stridx*/ 0x00, /*_ctrlmaster*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch1*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch2*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME)),\ + /* Speaker Output Terminal Descriptor(4.3.2.2) */\ + TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ UAC1_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC1_ENTITY_SPK_FEATURE_UNIT, /*_stridx*/ 0x00),\ + /* Microphone Input Terminal Descriptor(4.3.2.1) */\ + TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ UAC1_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_nchannels*/ 0x01, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ + /* Microphone Output Terminal Descriptor(4.3.2.2) */\ + TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_srcid*/ UAC1_ENTITY_MIC_INPUT_TERMINAL, /*_stridx*/ 0x00),\ + /* Standard AS Interface Descriptor(4.5.1) - Speaker Interface 1, Alternate 0 */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + /* Standard AS Interface Descriptor(4.5.1) - Speaker Interface 1, Alternate 1 */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + /* Class-Specific AS Interface Descriptor(4.5.2) */\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + /* Type I Format Type Descriptor(2.2.5) */\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x02, /*_subframesize*/ _nBytesPerSample_RX, /*_bitresolution*/ _nBitsUsedPerSample_RX, /*_freqs*/ __VA_ARGS__),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01, /*_syncep*/ 0x00),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + /* Standard AS Interface Descriptor(4.5.1) - Microphone Interface 2, Alternate 0 */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + /* Standard AS Interface Descriptor(4.5.1) - Microphone Interface 2, Alternate 1 */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + /* Class-Specific AS Interface Descriptor(4.5.2) */\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + /* Type I Format Type Descriptor(2.2.5) */\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample_TX, /*_bitresolution*/ _nBitsUsedPerSample_TX, /*_freqs*/ __VA_ARGS__),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS), /*_maxEPsize*/ _epinsize, /*_interval*/ 0x01, /*_syncep*/ 0x00),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) + #endif diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 1e001479c..4019e2850 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -912,7 +912,9 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint || tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { break; } else if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass == AUDIO_SUBCLASS_STREAMING) { - _audiod_fct[i].p_desc_as = p_desc; + if (_audiod_fct[i].p_desc_as == 0) { + _audiod_fct[i].p_desc_as = p_desc; + } } total_len += p_desc[0]; p_desc = tu_desc_next(p_desc); -- cgit v1.3.1 From 1ded8ac94c66eca996e2089bda7ac79fcf9ddd59 Mon Sep 17 00:00:00 2001 From: Mengsk Date: Fri, 3 Oct 2025 10:05:27 +0200 Subject: Update headset example Signed-off-by: Mengsk --- examples/device/uac2_headset/src/main.c | 6 +++++- examples/device/uac2_headset/src/usb_descriptors.c | 12 ++++++------ examples/device/uac2_headset/src/usb_descriptors.h | 20 ++++++++++---------- 3 files changed, 21 insertions(+), 17 deletions(-) diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index f6d3c041d..96fa66f1e 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -73,7 +73,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; // Audio controls // Current states -int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 +uint8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1];// +1 for master channel 0 // Buffer for microphone data @@ -610,6 +610,10 @@ void audio_control_task(void) { uint32_t btn = board_button_read(); + // Even UAC1 spec have status interrupt support like UAC2, most host do not support it + // So you have to either use UAC2 or use old day HID volume control + TU_VERIFY((tud_audio_version() == 1),); + if (!btn_prev && btn) { // Adjust volume between 0dB (100%) and -30dB (10%) for (int i = 0; i < CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1; i++) { diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index b7e024e9e..96e51769c 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -118,7 +118,7 @@ uint8_t const desc_uac1_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC1_TOTAL_LEN, 0x00, 100), // Interface number, string index, bytes per sample RX/TX, bits used per sample RX/TX, EP Out & EP In address, EP sizes, sample rate - TUD_AUDIO10_HEADSET_STEREO_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 2, \ + TUD_AUDIO10_HEADSET_STEREO_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 4, \ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX, \ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX, \ EPNUM_AUDIO_OUT, CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, \ @@ -137,8 +137,8 @@ uint8_t const desc_uac2_configuration[] = // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC2_TOTAL_LEN, 0x00, 100), - // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO20_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80, EPNUM_AUDIO_INT | 0x80) + // String index, EP Out & EP In address, EP Interrupt address + TUD_AUDIO20_HEADSET_STEREO_DESCRIPTOR(5, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80, EPNUM_AUDIO_INT | 0x80) }; TU_VERIFY_STATIC(sizeof(desc_uac2_configuration) == CONFIG_UAC2_TOTAL_LEN, "Incorrect size"); @@ -216,10 +216,10 @@ char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer - "TinyUSB headset", // 2: Product + "TinyUSB Headset", // 2: Product NULL, // 3: Serials will use unique ID if possible - "TinyUSB Speakers", // 4: Audio Interface - "TinyUSB Microphone", // 5: Audio Interface + "TinyUSB UAC1 Headset", // 4: Function + "TinyUSB UAC2 Headset", // 5: Function }; static uint16_t _desc_str[32 + 1]; diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index b6ebe2ae4..d673beace 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -110,10 +110,10 @@ enum TUD_AUDIO20_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ @@ -123,7 +123,7 @@ enum /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ @@ -134,10 +134,10 @@ enum TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ @@ -147,7 +147,7 @@ enum /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ @@ -212,9 +212,9 @@ enum /* Microphone Output Terminal Descriptor(4.3.2.2) */\ TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_srcid*/ UAC1_ENTITY_MIC_INPUT_TERMINAL, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.5.1) - Speaker Interface 1, Alternate 0 */\ - TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Standard AS Interface Descriptor(4.5.1) - Speaker Interface 1, Alternate 1 */\ - TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.5.2) */\ TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ /* Type I Format Type Descriptor(2.2.5) */\ @@ -224,9 +224,9 @@ enum /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.5.1) - Microphone Interface 2, Alternate 0 */\ - TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Standard AS Interface Descriptor(4.5.1) - Microphone Interface 2, Alternate 1 */\ - TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.5.2) */\ TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ /* Type I Format Type Descriptor(2.2.5) */\ -- cgit v1.3.1 From e38172fdf6f6b3a4f6fbc5b278a9424444bc61e6 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 4 Oct 2025 12:11:42 +0200 Subject: Fix descriptor looping Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 4019e2850..1e74c21b4 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -906,9 +906,10 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint p_desc = tu_desc_next(p_desc); while (p_desc_end - p_desc > 0) { // Stop if: - // - Non audio interface descriptor found + // - Non audio streaming interface descriptor found // - IAD found - if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceClass != TUSB_CLASS_AUDIO) + if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && + !(((tusb_desc_interface_t const *) p_desc)->bInterfaceClass == TUSB_CLASS_AUDIO && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass == AUDIO_SUBCLASS_STREAMING)) || tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { break; } else if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass == AUDIO_SUBCLASS_STREAMING) { -- cgit v1.3.1 From 3c33aff4a6e511922dd459e2b68b31c969d58fe0 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 4 Oct 2025 12:12:20 +0200 Subject: Fix jlink device name Signed-off-by: HiFiPhile --- hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake | 2 +- hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake index aae820aee..7b3456585 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT stm32h7s3xx) -set(JLINK_DEVICE stm32h7s3xx) +set(JLINK_DEVICE stm32h7s3l8) set(LD_FILE_Clang ${LD_FILE_GNU}) diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk index 47055a108..40b15bc0e 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk @@ -2,7 +2,7 @@ MCU_VARIANT = stm32h7s3xx CFLAGS += -DSTM32H7S3xx # For flash-jlink target -JLINK_DEVICE = stm32h7s3xx +JLINK_DEVICE = stm32h7s3l8 # flash target using on-board stlink flash: flash-stlink -- cgit v1.3.1 From 6acf49e4c2ce63a7a44a66b0dc499a96da1e49fd Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 5 Oct 2025 01:11:29 +0200 Subject: Use one control buffer as EP0 has no concurrency Signed-off-by: HiFiPhile --- .../device/audio_4_channel_mic/src/tusb_config.h | 2 - .../audio_4_channel_mic_freertos/src/tusb_config.h | 2 - examples/device/audio_test/src/tusb_config.h | 2 - .../device/audio_test_freertos/src/tusb_config.h | 2 - .../device/audio_test_multi_rate/src/tusb_config.h | 2 - examples/device/cdc_uac2/src/tusb_config.h | 3 - examples/device/uac2_headset/src/tusb_config.h | 3 - examples/device/uac2_speaker_fb/src/tusb_config.h | 3 - src/class/audio/audio_device.c | 63 ++++--------- src/class/audio/audio_device.h | 105 ++++++++++++--------- 10 files changed, 76 insertions(+), 111 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 6115f44bb..ef4e8a1fc 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -105,8 +105,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 7ce55aa77..26bd96d40 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -111,8 +111,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 32859b610..cb9554582 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -108,8 +108,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index ceb496e8d..76df6638c 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -114,8 +114,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index 49cebf9c4..78642f50f 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -122,8 +122,6 @@ extern "C" { // Have a look into audio_device.h for all configurations -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index f1cff7e9a..ecba53ab8 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -155,9 +155,6 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device -// Size of control request buffer -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - // CDC FIFO size of TX and RX #define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index 339fb81a6..c7f1122b2 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -164,9 +164,6 @@ extern "C" { // Example read FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, TU_MAX(32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_OUT, 32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_OUT)) -// Size of control request buffer -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - #ifdef __cplusplus } #endif diff --git a/examples/device/uac2_speaker_fb/src/tusb_config.h b/examples/device/uac2_speaker_fb/src/tusb_config.h index b91a9ea5a..3f8ad5ea4 100644 --- a/examples/device/uac2_speaker_fb/src/tusb_config.h +++ b/examples/device/uac2_speaker_fb/src/tusb_config.h @@ -145,9 +145,6 @@ extern "C" { // Enable feedback EP #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 1 -// Size of control request buffer -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - #ifdef __cplusplus } #endif diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 1e74c21b4..dcdc0d4a9 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -181,15 +181,9 @@ tu_static CFG_TUD_MEM_SECTION struct { } lin_buf_out; #endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && USE_LINEAR_BUFFER -// Control buffers +// Control buffer tu_static CFG_TUD_MEM_SECTION struct { - TUD_EPBUF_DEF(buf1, CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ); - #if CFG_TUD_AUDIO > 1 - TUD_EPBUF_DEF(buf2, CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ); - #endif - #if CFG_TUD_AUDIO > 2 - TUD_EPBUF_DEF(buf3, CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ); - #endif + TUD_EPBUF_DEF(buf, CFG_TUD_AUDIO_CTRL_BUF_SZ); } ctrl_buf; // Aligned buffer for feedback EP @@ -219,6 +213,7 @@ typedef struct uint8_t rhport; uint8_t const *p_desc;// Pointer pointing to Standard AC Interface Descriptor(4.7.1) - Audio Control descriptor defining audio function uint8_t const *p_desc_as;// Pointer pointing to 1st Standard AS Interface Descriptor(4.9.1) - Audio Streaming descriptor defining audio function + uint16_t desc_length;// Length of audio function descriptor #if CFG_TUD_AUDIO_ENABLE_EP_IN uint8_t ep_in; // TX audio data EP. @@ -244,8 +239,6 @@ typedef struct bool mounted;// Device opened - uint16_t desc_length;// Length of audio function descriptor - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP struct { uint32_t value; // Feedback value for asynchronous mode (in 16.16 format). @@ -290,10 +283,6 @@ typedef struct /*------------- From this point, data is not cleared by bus reset -------------*/ - // Buffer for control requests - uint8_t *ctrl_buf; - uint8_t ctrl_buf_sz; - // EP Transfer buffers and FIFOs #if CFG_TUD_AUDIO_ENABLE_EP_OUT tu_fifo_t ep_out_ff; @@ -327,7 +316,11 @@ typedef struct #define USE_LINEAR_BUFFER_RX 0 #endif -#define ITF_MEM_RESET_SIZE offsetof(audiod_function_t, ctrl_buf) +#if CFG_TUD_AUDIO_ENABLE_EP_OUT +#define ITF_MEM_RESET_SIZE offsetof(audiod_function_t, ep_out_ff) +#else +#define ITF_MEM_RESET_SIZE offsetof(audiod_function_t, ep_in_ff) +#endif //--------------------------------------------------------------------+ // WEAK FUNCTION STUBS @@ -722,26 +715,6 @@ void audiod_init(void) { for (uint8_t i = 0; i < CFG_TUD_AUDIO; i++) { audiod_function_t *audio = &_audiod_fct[i]; - // Initialize control buffers - switch (i) { - case 0: - audio->ctrl_buf = ctrl_buf.buf1; - audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ; - break; -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ > 0 - case 1: - audio->ctrl_buf = ctrl_buf.buf2; - audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ; - break; -#endif -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ > 0 - case 2: - audio->ctrl_buf = ctrl_buf.buf3; - audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ; - break; -#endif - } - // Initialize IN EP FIFO if required #if CFG_TUD_AUDIO_ENABLE_EP_IN @@ -1341,20 +1314,20 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const if (tud_audio_n_version(func_id) == 2) { uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf.buf); audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } #endif // Invoke callback - return tud_audio_set_req_entity_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); + return tud_audio_set_req_entity_cb(rhport, p_request, ctrl_buf.buf); } else { // Find index of audio driver structure and verify interface really exists TU_VERIFY(audiod_verify_itf_exists(itf, &func_id)); // Invoke callback - return tud_audio_set_req_itf_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); + return tud_audio_set_req_itf_cb(rhport, p_request, ctrl_buf.buf); } } break; @@ -1369,7 +1342,7 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const if (_audiod_fct[func_id].ep_in == ep) { uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (ctrlSel == AUDIO10_EP_CTRL_SAMPLING_FREQ && p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf) & 0x00FFFFFF; + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf.buf) & 0x00FFFFFF; audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } @@ -1377,7 +1350,7 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const #endif // Invoke callback - bool ret = tud_audio_set_req_ep_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); + bool ret = tud_audio_set_req_ep_cb(rhport, p_request, ctrl_buf.buf); #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP if (ret && tud_audio_n_version(func_id) == 1) { @@ -1474,7 +1447,7 @@ static bool audiod_control_request(uint8_t rhport, tusb_control_request_t const } // If we end here, the received request is a set request - we schedule a receive for the data stage and return true here. We handle the rest later in audiod_control_complete() once the data stage was finished - TU_VERIFY(tud_control_xfer(rhport, p_request, _audiod_fct[func_id].ctrl_buf, _audiod_fct[func_id].ctrl_buf_sz)); + TU_VERIFY(tud_control_xfer(rhport, p_request, ctrl_buf.buf, sizeof(ctrl_buf.buf))); return true; } @@ -1735,10 +1708,10 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req } // Crop length - if (len > _audiod_fct[func_id].ctrl_buf_sz) len = _audiod_fct[func_id].ctrl_buf_sz; + if (len > sizeof(ctrl_buf.buf)) len = sizeof(ctrl_buf.buf); // Copy into buffer - TU_VERIFY(0 == tu_memcpy_s(_audiod_fct[func_id].ctrl_buf, _audiod_fct[func_id].ctrl_buf_sz, data, (size_t) len)); + TU_VERIFY(0 == tu_memcpy_s(ctrl_buf.buf, sizeof(ctrl_buf.buf), data, (size_t) len)); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL if (tud_audio_n_version(func_id) == 2) { @@ -1747,7 +1720,7 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req uint8_t entityID = TU_U16_HIGH(p_request->wIndex); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf.buf); audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } @@ -1755,7 +1728,7 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req #endif // Schedule transmit - return tud_control_xfer(rhport, p_request, (void *) _audiod_fct[func_id].ctrl_buf, len); + return tud_control_xfer(rhport, p_request, ctrl_buf.buf, len); } // Verify an entity with the given ID exists and returns also the corresponding driver index diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 39212472a..eb916cd1c 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -37,21 +37,10 @@ // All sizes are in bytes! -// Size of control buffer used to receive and send control messages via EP0 - has to be big enough to hold your biggest request structure e.g. range requests with multiple intervals defined or cluster descriptors -#ifndef CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ -#error You must define an audio class control request buffer size! -#endif - -#if CFG_TUD_AUDIO > 1 -#ifndef CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ -#error You must define an audio class control request buffer size! -#endif -#endif - -#if CFG_TUD_AUDIO > 2 -#ifndef CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ -#error You must define an audio class control request buffer size! -#endif +// Size of control buffer used to receive and send control messages via EP0 - has to be big enough to hold your +// biggest request structure e.g. range requests with multiple intervals defined or cluster descriptors +#ifndef CFG_TUD_AUDIO_CTRL_BUF_SZ +#define CFG_TUD_AUDIO_CTRL_BUF_SZ 64 #endif // End point sizes IN BYTES - Limits: Full Speed <= 1023, High Speed <= 1024 @@ -153,7 +142,8 @@ #endif #endif -// (For TYPE-I format only) Flow control is necessary to allow IN ep send correct amount of data, unless it's a virtual device where data is perfectly synchronized to USB clock. +// (For TYPE-I format only) Flow control is necessary to allow IN ep send correct amount of data, unless it's a +// virtual device where data is perfectly synchronized to USB clock. #ifndef CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 #endif @@ -230,12 +220,15 @@ static inline bool tud_audio_int_write (const audio_interru #endif // Buffer control EP data and schedule a transmit -// This function is intended to be used if you do not have a persistent buffer or memory location available (e.g. non-local variables) and need to answer onto a -// get request. This function buffers your answer request frame into the control buffer of the corresponding audio driver and schedules a transmit for sending it. -// Since transmission is triggered via interrupts, a persistent memory location is required onto which the buffer pointer in pointing. If you already have such -// available you may directly use 'tud_control_xfer(...)'. In this case data does not need to be copied into an additional buffer and you save some time. +// This function is intended to be used if you do not have a persistent buffer or memory location available +// (e.g. non-local variables) and need to answer onto a get request. This function buffers your answer request +// frame into the control buffer of the corresponding audio driver and schedules a transmit for sending it. +// Since transmission is triggered via interrupts, a persistent memory location is required onto which the buffer +// pointer in pointing. If you already have such available you may directly use 'tud_control_xfer(...)'. In this +// case data does not need to be copied into an additional buffer and you save some time. // If the request's wLength is zero, a status packet is sent instead. -bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_request_t const * p_request, void* data, uint16_t len); +bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_request_t const * p_request, + void* data, uint16_t len); //--------------------------------------------------------------------+ // Application Callback API @@ -243,14 +236,18 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req #if CFG_TUD_AUDIO_ENABLE_EP_IN // Invoked in ISR context once an audio packet was sent successfully. -// Normally this function is not needed, since the data transfer should be driven by audio clock (i.e. I2S clock), call tud_audio_write() in I2S receive callback. -bool tud_audio_tx_done_isr(uint8_t rhport, uint16_t n_bytes_sent, uint8_t func_id, uint8_t ep_in, uint8_t cur_alt_setting); +// Normally this function is not needed, since the data transfer should be driven by audio clock (i.e. I2S clock), +// call tud_audio_write() in I2S receive callback. +bool tud_audio_tx_done_isr(uint8_t rhport, uint16_t n_bytes_sent, uint8_t func_id, uint8_t ep_in, + uint8_t cur_alt_setting); #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT // Invoked in ISR context once an audio packet was received successfully. -// Normally this function is not needed, since the data transfer should be driven by audio clock (i.e. I2S clock), call tud_audio_read() in I2S transmit callback. -bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t func_id, uint8_t ep_out, uint8_t cur_alt_setting); +// Normally this function is not needed, since the data transfer should be driven by audio clock (i.e. I2S clock), +// call tud_audio_read() in I2S transmit callback. +bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t func_id, uint8_t ep_out, + uint8_t cur_alt_setting); #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -259,41 +256,55 @@ bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t fu // // Option 1 - AUDIO_FEEDBACK_METHOD_FIFO_COUNT // Feedback value is calculated within the audio driver by regulating the FIFO level to half fill. -// Advantage: No ISR interrupt is enabled, hence the CPU need not to handle an ISR every 1ms or 125us and thus less CPU load, well tested -// (Windows, Linux, OSX) with a reliable result so far. -// Disadvantage: A FIFO of minimal 4 frames is needed to compensate for jitter, an average delay of 2 frames is introduced. +// Advantage: No SOF interrupt is enabled, hence the CPU need not to handle an ISR every 1ms or 125us and thus +// less CPU load, well tested (Windows, Linux, OSX) with a reliable result so far. +// Disadvantage: A FIFO of minimal 4 frames is needed to compensate for jitter, an average delay of 2 frames is +// introduced. // // Option 2 - AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED / AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT -// Feedback value is calculated within the audio driver by use of SOF interrupt. The driver needs information about the master clock f_m from -// which the audio sample frequency f_s is derived, f_s itself, and the cycle count of f_m at time of the SOF interrupt (e.g. by use of a hardware counter). +// Feedback value is calculated within the audio driver by use of SOF interrupt. The driver needs information +// about the master clock f_m from which the audio sample frequency f_s is derived, f_s itself, and the cycle +// count of f_m at time of the SOF interrupt (e.g. by use of a hardware counter). // See tud_audio_set_fb_params() and tud_audio_feedback_update() -// Advantage: Reduced jitter in the feedback value computation, hence, the receive FIFO can be smaller and thus a smaller delay is possible. -// Disadvantage: higher CPU load due to SOF ISR handling every frame i.e. 1ms or 125us. (The most critical point is the reading of the cycle counter value of f_m. -// It is read from within the SOF ISR - see: audiod_sof() -, hence, the ISR must has a high priority such that no software dependent "random" delay i.e. jitter is introduced). -// Long-term drift could occur since error is accumulated. +// Advantage: Reduced jitter in the feedback value computation, hence, the receive FIFO can be smaller and thus a +// smaller delay is possible. +// Disadvantage: higher CPU load due to SOF ISR handling every frame i.e. 1ms or 125us. (The most critical point +// is the reading of the cycle counter value of f_m. It is read from within the SOF ISR - see: audiod_sof() -, +// hence, the ISR must has a high priority such that no software dependent "random" delay i.e. jitter is +// introduced). Long-term drift will cause the FIFO under/overflow, you still needs to correct it somehow. // // Option 3 - manual -// Determined by the user itself and set by use of tud_audio_n_fb_set(). The feedback value may be determined e.g. from some fill status of some FIFO buffer. -// Advantage: No ISR interrupt is enabled, hence the CPU need not to handle an ISR every 1ms or 125us and thus less CPU load. -// Disadvantage: typically a larger FIFO is needed to compensate for jitter (e.g. 6 frames), i.e. a larger delay is introduced. +// Determined by the user itself and set by use of tud_audio_n_fb_set(). The feedback value may be determined +// e.g. from some fill status of some FIFO buffer. +// Advantage: No ISR interrupt is enabled, hence the CPU need not to handle an ISR every 1ms or 125us and thus +// less CPU load. +// Disadvantage: typically a larger FIFO is needed to compensate for jitter (e.g. 6 frames), i.e. a larger delay +// is introduced. -// This function is used to provide data rate feedback from an asynchronous sink. Feedback value will be sent at FB endpoint interval till it's changed. +// This function is used to provide data rate feedback from an asynchronous sink. Feedback value will be sent at +// FB endpoint interval till it's changed. // -// The feedback format is specified to be 16.16 for HS and 10.14 for FS devices (see Universal Serial Bus Specification Revision 2.0 5.12.4.2). -// For simplicity, this function always uses 16.16 format. For FS devices, the driver will automatically convert the value to 10.14 format. +// The feedback format is specified to be 16.16 for HS and 10.14 for FS devices (see Universal Serial Bus +// Specification Revision 2.0 5.12.4.2). For simplicity, this function always uses 16.16 format. For FS devices, +// the driver will automatically convert the value to 10.14 format. // -// Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 devices. On Linux and it seems the -// driver can work with either format. +// Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 +// devices. On Linux and it seems the driver can work with either format. // -// Feedback value can be determined from within the SOF ISR of the audio driver. This should reduce jitter. If the feature is used, the user can not set the feedback value. +// Feedback value can be determined from within the SOF ISR of the audio driver. This should reduce jitter. If the +// feature is used, the user can not set the feedback value. // // Determine feedback value - The feedback method is described in 5.12.4.2 of the USB 2.0 spec // Boiled down, the feedback value Ff = n_samples / (micro)frame. -// Since an accuracy of less than 1 Sample / second is desired, at least n_frames = ceil(2^K * f_s / f_m) frames need to be measured, where K = 10 for full speed and K = 13 -// for high speed, f_s is the sampling frequency e.g. 48 kHz and f_m is the cpu clock frequency e.g. 100 MHz (or any other master clock whose clock count is available and locked to f_s) -// The update interval in the (4.10.2.1) Feedback Endpoint Descriptor must be less or equal to 2^(K - P), where P = min( ceil(log2(f_m / f_s)), K) -// feedback = n_cycles / n_frames * f_s / f_m in 16.16 format, where n_cycles are the number of main clock cycles within fb_n_frames +// Since an accuracy of less than 1 Sample / second is desired, at least n_frames = ceil(2^K * f_s / f_m) frames +// need to be measured, where K = 10 for full speed and K = 13 for high speed, f_s is the sampling frequency +// e.g. 48 kHz and f_m is the cpu clock frequency e.g. 100 MHz (or any other master clock whose clock count is +// available and locked to f_s) +// The update interval in the (4.10.2.1) Feedback Endpoint Descriptor must be less or equal to 2^(K - P), where +// P = min( ceil(log2(f_m / f_s)), K) +// feedback = n_cycles / n_frames * f_s / f_m in 16.16 format, where n_cycles are the number of main clock cycles +// within fb_n_frames bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback); // Update feedback value with passed MCLK cycles since last time this update function is called. -- cgit v1.3.1 From d4374bb0dbb0e0eddd4459219f981fd8f62365a1 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 9 Oct 2025 18:18:08 +0700 Subject: centralize hcd_dcache_uncached() for ED --- src/portable/ohci/ohci.c | 359 +++++++++++++++++++++-------------------------- src/portable/ohci/ohci.h | 57 +++----- 2 files changed, 182 insertions(+), 234 deletions(-) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 340d8c56a..ee85f1b6a 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -109,17 +109,17 @@ enum { enum { OHCI_CCODE_NO_ERROR = 0, OHCI_CCODE_CRC = 1, - OHCI_CCODE_BIT_STUFFING = 2, - OHCI_CCODE_DATA_TOGGLE_MISMATCH = 3, - OHCI_CCODE_STALL = 4, - OHCI_CCODE_DEVICE_NOT_RESPONDING = 5, - OHCI_CCODE_PID_CHECK_FAILURE = 6, - OHCI_CCODE_UNEXPECTED_PID = 7, - OHCI_CCODE_DATA_OVERRUN = 8, - OHCI_CCODE_DATA_UNDERRUN = 9, - OHCI_CCODE_BUFFER_OVERRUN = 12, - OHCI_CCODE_BUFFER_UNDERRUN = 13, - OHCI_CCODE_NOT_ACCESSED = 14, + OHCI_CCODE_BIT_STUFFING = 2, + OHCI_CCODE_DATA_TOGGLE_MISMATCH = 3, + OHCI_CCODE_STALL = 4, + OHCI_CCODE_DEVICE_NOT_RESPONDING = 5, + OHCI_CCODE_PID_CHECK_FAILURE = 6, + OHCI_CCODE_UNEXPECTED_PID = 7, + OHCI_CCODE_DATA_OVERRUN = 8, + OHCI_CCODE_DATA_UNDERRUN = 9, + OHCI_CCODE_BUFFER_OVERRUN = 12, + OHCI_CCODE_BUFFER_UNDERRUN = 13, + OHCI_CCODE_NOT_ACCESSED = 14, }; enum { @@ -148,6 +148,8 @@ enum { //--------------------------------------------------------------------+ TU_ATTR_WEAK bool hcd_dcache_clean(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; return true; } TU_ATTR_WEAK bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; return true; } + +// Optional macro to access ED in uncached way #ifndef hcd_dcache_uncached #define hcd_dcache_uncached(x) (x) #endif @@ -157,17 +159,21 @@ TU_ATTR_WEAK bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { //--------------------------------------------------------------------+ CFG_TUH_MEM_SECTION TU_ATTR_ALIGNED(256) static ohci_data_t ohci_data; -static ohci_ed_t * const p_ed_head[] = -{ - [TUSB_XFER_CONTROL] = &ohci_data.control[0].ed, - [TUSB_XFER_BULK ] = &ohci_data.bulk_head_ed, - [TUSB_XFER_INTERRUPT] = &ohci_data.period_head_ed, +static ohci_ed_t * const p_ed_head[] = { + [TUSB_XFER_CONTROL] = hcd_dcache_uncached(&ohci_data.control[0].ed), + [TUSB_XFER_BULK ] = hcd_dcache_uncached(&ohci_data.bulk_head_ed), + [TUSB_XFER_INTERRUPT] = hcd_dcache_uncached(&ohci_data.period_head_ed), [TUSB_XFER_ISOCHRONOUS] = NULL // TODO Isochronous }; static void ed_list_insert(ohci_ed_t * p_pre, ohci_ed_t * p_ed); static void ed_list_remove_by_addr(ohci_ed_t * p_head, uint8_t dev_addr); static gtd_extra_data_t *gtd_get_extra_data(ohci_gtd_t const * const gtd); +static ohci_ed_t* ed_from_addr(uint8_t dev_addr, uint8_t ep_addr); + +TU_ATTR_ALWAYS_INLINE static inline ohci_ed_t* ed_control(uint8_t daddr) { + return hcd_dcache_uncached(&ohci_data.control[daddr].ed); +} //--------------------------------------------------------------------+ // USBH-HCD API @@ -175,13 +181,11 @@ static gtd_extra_data_t *gtd_get_extra_data(ohci_gtd_t const * const gtd); // If your system requires separation of virtual and physical memory, implement // tusb_app_virt_to_phys and tusb_app_virt_to_phys in your application. -TU_ATTR_ALWAYS_INLINE static inline void *_phys_addr(void *virtual_address) -{ +TU_ATTR_ALWAYS_INLINE static inline void *_phys_addr(void *virtual_address) { return tusb_app_virt_to_phys(virtual_address); } -TU_ATTR_ALWAYS_INLINE static inline void *_virt_addr(void *physical_address) -{ +TU_ATTR_ALWAYS_INLINE static inline void *_virt_addr(void *physical_address) { return tusb_app_phys_to_virt(physical_address); } @@ -192,8 +196,8 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { //------------- Data Structure init -------------// tu_memclr(&ohci_data, sizeof(ohci_data_t)); - for(uint8_t i=0; i<32; i++) - { // assign all interrupt pointers to period head ed + // assign all interrupt pointers to period head ed + for(uint8_t i=0; i<32; i++) { ohci_data.hcca.interrupt_table[i] = (uint32_t) _phys_addr(&ohci_data.period_head_ed); } @@ -202,19 +206,14 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { ohci_data.period_head_ed.w0.skip = 1; //If OHCI hardware is in SMM mode, gain ownership (Ref OHCI spec 5.1.1.3.3) - if (OHCI_REG->control_bit.interrupt_routing == 1) - { + if (OHCI_REG->control_bit.interrupt_routing == 1) { OHCI_REG->command_status_bit.ownership_change_request = 1; while (OHCI_REG->control_bit.interrupt_routing == 1) {} - } - - //If OHCI hardware has come from warm-boot, signal resume (Ref OHCI spec 5.1.1.3.4) - else if (OHCI_REG->control_bit.hc_functional_state != OHCI_CONTROL_FUNCSTATE_RESET && - OHCI_REG->control_bit.hc_functional_state != OHCI_CONTROL_FUNCSTATE_OPERATIONAL) - { + } else if (OHCI_REG->control_bit.hc_functional_state != OHCI_CONTROL_FUNCSTATE_RESET && + OHCI_REG->control_bit.hc_functional_state != OHCI_CONTROL_FUNCSTATE_OPERATIONAL) { + //If OHCI hardware has come from warm-boot, signal resume (Ref OHCI spec 5.1.1.3.4) //Wait 20 ms. (Ref Usb spec 7.1.7.7) OHCI_REG->control_bit.hc_functional_state = OHCI_CONTROL_FUNCSTATE_RESUME; - tusb_time_delay_ms_api(20); } @@ -256,7 +255,6 @@ uint32_t hcd_frame_number(uint8_t rhport) return (ohci_data.frame_number_hi << 16) | OHCI_REG->frame_number; } - //--------------------------------------------------------------------+ // PORT API //--------------------------------------------------------------------+ @@ -282,26 +280,18 @@ tusb_speed_t hcd_port_speed_get(uint8_t hostid) // endpoints are tied to an address, which only reclaim after a long delay when enumerating // thus there is no need to make sure ED is not in HC's cahed as it will not for sure -void hcd_device_close(uint8_t rhport, uint8_t dev_addr) -{ +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { // TODO OHCI (void) rhport; // addr0 serves as static head --> only set skip bit - if ( dev_addr == 0 ) - { - hcd_dcache_uncached(ohci_data.control[0].ed.w0).skip = 1; - }else - { - // remove control - ed_list_remove_by_addr( p_ed_head[TUSB_XFER_CONTROL], dev_addr); - - // remove bulk - ed_list_remove_by_addr(p_ed_head[TUSB_XFER_BULK], dev_addr); - - // remove interrupt - ed_list_remove_by_addr(p_ed_head[TUSB_XFER_INTERRUPT], dev_addr); - + if (dev_addr == 0) { + ohci_ed_t* ed = ed_control(0); + ed->w0.skip = 1; + } else { + ed_list_remove_by_addr(p_ed_head[TUSB_XFER_CONTROL], dev_addr); // remove control + ed_list_remove_by_addr(p_ed_head[TUSB_XFER_BULK], dev_addr); // remove bulk + ed_list_remove_by_addr(p_ed_head[TUSB_XFER_INTERRUPT], dev_addr); // remove interrupt // TODO remove ISO } } @@ -313,29 +303,26 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) //--------------------------------------------------------------------+ // List Helper //--------------------------------------------------------------------+ -static inline tusb_xfer_type_t ed_get_xfer_type(ohci_ed_word0 w0) -{ +static inline tusb_xfer_type_t ed_get_xfer_type(ohci_ed_word0_t w0) { return (w0.ep_number == 0 ) ? TUSB_XFER_CONTROL : (w0.is_iso ) ? TUSB_XFER_ISOCHRONOUS : (w0.is_interrupt_xfer) ? TUSB_XFER_INTERRUPT : TUSB_XFER_BULK; } -static void ed_init(ohci_ed_t *p_ed, uint8_t dev_addr, uint16_t ep_size, uint8_t ep_addr, uint8_t xfer_type, uint8_t interval) -{ +static void ed_init(ohci_ed_t *p_ed, uint8_t dev_addr, uint16_t ep_size, uint8_t ep_addr, uint8_t xfer_type, uint8_t interval) { (void) interval; // address 0 is used as async head, which always on the list --> cannot be cleared - if (dev_addr != 0) - { - hcd_dcache_uncached(p_ed->td_tail) = 0; - hcd_dcache_uncached(p_ed->td_head).address = 0; - hcd_dcache_uncached(p_ed->next) = 0; + if (dev_addr != 0) { + p_ed->td_tail = 0; + p_ed->td_head.address = 0; + p_ed->next = 0; } tuh_bus_info_t bus_info; tuh_bus_info_get(dev_addr, &bus_info); - ohci_ed_word0 w0 = {.u = 0}; + ohci_ed_word0_t w0 = {.value = 0}; w0.dev_addr = dev_addr; w0.ep_number = ep_addr & 0x0F; w0.pid = (xfer_type == TUSB_XFER_CONTROL) ? PID_FROM_TD : (tu_edpt_dir(ep_addr) ? PID_IN : PID_OUT); @@ -345,12 +332,13 @@ static void ed_init(ohci_ed_t *p_ed, uint8_t dev_addr, uint16_t ep_size, uint8_t w0.used = 1; w0.is_interrupt_xfer = (xfer_type == TUSB_XFER_INTERRUPT ? 1 : 0); - hcd_dcache_uncached(p_ed->w0) = w0; + p_ed->w0 = w0; } static void gtd_init(ohci_gtd_t *p_td, uint8_t *data_ptr, uint16_t total_bytes) { tu_memclr(p_td, sizeof(ohci_gtd_t)); + p_td->used = 1; gtd_get_extra_data(p_td)->expected_bytes = total_bytes; p_td->buffer_rounding = 1; // less than queued length is not a error @@ -367,130 +355,109 @@ static void gtd_init(ohci_gtd_t *p_td, uint8_t *data_ptr, uint16_t total_bytes) } } -static ohci_ed_t * ed_from_addr(uint8_t dev_addr, uint8_t ep_addr) -{ - if ( tu_edpt_number(ep_addr) == 0 ) return &ohci_data.control[dev_addr].ed; +static ohci_ed_t* ed_from_addr(uint8_t dev_addr, uint8_t ep_addr) { + if (tu_edpt_number(ep_addr) == 0) { + return ed_control(dev_addr); + } ohci_ed_t* ed_pool = ohci_data.ed_pool; - - for(uint32_t i=0; iw0.dev_addr == dev_addr) && + ep_addr == tu_edpt_addr(qhd->w0.ep_number, qhd->w0.pid == PID_IN)) { + return qhd; } } return NULL; } -static ohci_ed_t * ed_find_free(void) -{ +static ohci_ed_t* ed_find_free(void) { ohci_ed_t* ed_pool = ohci_data.ed_pool; - - for(uint8_t i = 0; i < ED_MAX; i++) - { - if ( !hcd_dcache_uncached(ed_pool[i].w0).used ) return &ed_pool[i]; + for (size_t i = 0; i < ED_MAX; i++) { + ohci_ed_t* qhd = hcd_dcache_uncached(&ed_pool[i]); + if (!qhd->w0.used) { + return qhd; + } } - return NULL; } -static void ed_list_insert(ohci_ed_t * p_pre, ohci_ed_t * p_ed) -{ - hcd_dcache_uncached(p_ed->next) = hcd_dcache_uncached(p_pre->next); - hcd_dcache_uncached(p_pre->next) = (uint32_t) _phys_addr(p_ed); +static void ed_list_insert(ohci_ed_t * p_pre, ohci_ed_t * p_ed) { + p_ed->next = p_pre->next; + p_pre->next = (uint32_t) _phys_addr(p_ed); } -static void ed_list_remove_by_addr(ohci_ed_t * p_head, uint8_t dev_addr) -{ +static void ed_list_remove_by_addr(ohci_ed_t * p_head, uint8_t dev_addr) { ohci_ed_t* p_prev = p_head; - uint32_t ed_pa; - while( (ed_pa = hcd_dcache_uncached(p_prev->next)) ) - { - ohci_ed_t* ed = (ohci_ed_t*) _virt_addr((void *)ed_pa); + while (p_prev->next) { + ohci_ed_t* ed = (ohci_ed_t*)_virt_addr((void*)p_prev->next); - if (hcd_dcache_uncached(ed->w0).dev_addr == dev_addr) - { + if (ed->w0.dev_addr == dev_addr) { // Prevent Host Controller from processing this ED while we remove it - hcd_dcache_uncached(ed->w0).skip = 1; + ed->w0.skip = 1; // unlink ed, will also move up p_prev - hcd_dcache_uncached(p_prev->next) = hcd_dcache_uncached(ed->next); + p_prev->next = ed->next; // point the removed ED's next pointer to list head to make sure HC can always safely move away from this ED - hcd_dcache_uncached(ed->next) = (uint32_t) _phys_addr(p_head); - ohci_ed_word0 w0 = hcd_dcache_uncached(ed->w0); - w0.used = 0; - w0.skip = 0; - hcd_dcache_uncached(ed->w0) = w0; - }else - { - p_prev = (ohci_ed_t*) _virt_addr((void *)ed_pa); + ed->next = (uint32_t)_phys_addr(p_head); + ed->w0.used = 0; + ed->w0.skip = 0; + } else { + p_prev = (ohci_ed_t*)_virt_addr((void*)p_prev->next); } } } -static ohci_gtd_t * gtd_find_free(void) -{ - for(uint8_t i=0; i < GTD_MAX; i++) - { - if ( !ohci_data.gtd_extra[i].used ) { - ohci_data.gtd_extra[i].used = 1; +static ohci_gtd_t* gtd_find_free(void) { + for (uint8_t i = 0; i < GTD_MAX; i++) { + if (!ohci_data.gtd_pool[i].used) { return &ohci_data.gtd_pool[i]; } } - return NULL; } //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const* ep_desc) { + (void)rhport; // TODO iso support TU_ASSERT(ep_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS); //------------- Prepare Queue Head -------------// - ohci_ed_t * p_ed; - - if ( ep_desc->bEndpointAddress == 0 ) - { - p_ed = &ohci_data.control[dev_addr].ed; - }else - { + ohci_ed_t* p_ed; + if (ep_desc->bEndpointAddress == 0) { + p_ed = ed_control(dev_addr); + } else { p_ed = ed_find_free(); } TU_ASSERT(p_ed); - ed_init( p_ed, dev_addr, tu_edpt_packet_size(ep_desc), ep_desc->bEndpointAddress, - ep_desc->bmAttributes.xfer, ep_desc->bInterval ); + ed_init(p_ed, dev_addr, tu_edpt_packet_size(ep_desc), ep_desc->bEndpointAddress, + ep_desc->bmAttributes.xfer, ep_desc->bInterval); // control of dev0 is used as static async head - if ( dev_addr == 0 ) - { - hcd_dcache_uncached(p_ed->w0).skip = 0; // only need to clear skip bit + if (dev_addr == 0) { + p_ed->w0.skip = 0; // only need to clear skip bit return true; } - if ( tu_edpt_number(ep_desc->bEndpointAddress) != 0 ) { + if (tu_edpt_number(ep_desc->bEndpointAddress) != 0) { // Get an empty TD and use it as the end-of-list marker. // This marker TD will be used when a transfer is made on this EP // (and a new, empty TD will be allocated for the next-next transfer). ohci_gtd_t* gtd = gtd_find_free(); TU_ASSERT(gtd); - hcd_dcache_uncached(p_ed->td_head).address = (uint32_t)_phys_addr(gtd); - hcd_dcache_uncached(p_ed->td_tail) = (uint32_t)_phys_addr(gtd); + p_ed->td_head.address = (uint32_t)_phys_addr(gtd); + p_ed->td_tail = (uint32_t)_phys_addr(gtd); } - ed_list_insert( p_ed_head[ep_desc->bmAttributes.xfer], p_ed ); - + ed_list_insert(p_ed_head[ep_desc->bmAttributes.xfer], p_ed); return true; } @@ -499,25 +466,23 @@ bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { return false; // TODO not implemented yet } -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) -{ +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { (void) rhport; - ohci_ed_t* ed = &ohci_data.control[dev_addr].ed; + ohci_ed_t* ed = ed_control(dev_addr); ohci_gtd_t *qtd = &ohci_data.control[dev_addr].gtd; hcd_dcache_clean(setup_packet, 8); gtd_init(qtd, (uint8_t*)(uintptr_t) setup_packet, 8); - gtd_get_extra_data(qtd)->dev_addr = dev_addr; - gtd_get_extra_data(qtd)->ep_addr = tu_edpt_addr(0, TUSB_DIR_OUT); + qtd->index = dev_addr; qtd->pid = PID_SETUP; qtd->data_toggle = GTD_DT_DATA0; qtd->delay_interrupt = OHCI_INT_ON_COMPLETE_YES; hcd_dcache_clean(qtd, sizeof(ohci_gtd_t)); //------------- Attach TDs list to Control Endpoint -------------// - hcd_dcache_uncached(ed->td_head.address) = (uint32_t) _phys_addr(qtd); + ed->td_head.address = (uint32_t) _phys_addr(qtd); OHCI_REG->command_status_bit.control_list_filled = 1; @@ -538,32 +503,27 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * hcd_dcache_clean(buffer, buflen); } - if ( epnum == 0 ) - { - ohci_ed_t* ed = &ohci_data.control[dev_addr].ed; + ohci_ed_t * ed = ed_from_addr(dev_addr, ep_addr); + if (epnum == 0) { ohci_gtd_t* gtd = &ohci_data.control[dev_addr].gtd; gtd_init(gtd, buffer, buflen); - gtd_get_extra_data(gtd)->dev_addr = dev_addr; - gtd_get_extra_data(gtd)->ep_addr = ep_addr; - gtd->pid = dir ? PID_IN : PID_OUT; - gtd->data_toggle = GTD_DT_DATA1; // Both Data and Ack stage start with DATA1 + gtd->index = dev_addr; + gtd->pid = dir ? PID_IN : PID_OUT; + gtd->data_toggle = GTD_DT_DATA1; // Both Data and Ack stage start with DATA1 gtd->delay_interrupt = OHCI_INT_ON_COMPLETE_YES; hcd_dcache_clean(gtd, sizeof(ohci_gtd_t)); - hcd_dcache_uncached(ed->td_head).address = (uint32_t) _phys_addr(gtd); + ed->td_head.address = (uint32_t)_phys_addr(gtd); OHCI_REG->command_status_bit.control_list_filled = 1; - }else - { - ohci_ed_t * ed = ed_from_addr(dev_addr, ep_addr); - tusb_xfer_type_t xfer_type = ed_get_xfer_type( hcd_dcache_uncached(ed->w0) ); - ohci_gtd_t *gtd = (ohci_gtd_t *)_virt_addr((void *)hcd_dcache_uncached(ed->td_tail)); + } else { + tusb_xfer_type_t xfer_type = ed_get_xfer_type(ed->w0); + ohci_gtd_t* gtd = (ohci_gtd_t*)_virt_addr((void*)ed->td_tail); gtd_init(gtd, buffer, buflen); - gtd_get_extra_data(gtd)->dev_addr = dev_addr; - gtd_get_extra_data(gtd)->ep_addr = ep_addr; + gtd->index = ed-ohci_data.ed_pool; gtd->delay_interrupt = OHCI_INT_ON_COMPLETE_YES; // Insert a new, empty TD at the tail, to be used by the next transfer @@ -573,9 +533,11 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * gtd->next = (uint32_t)_phys_addr(new_gtd); hcd_dcache_clean(gtd, sizeof(ohci_gtd_t)); - hcd_dcache_uncached(ed->td_tail) = (uint32_t)_phys_addr(new_gtd); + ed->td_tail = (uint32_t)_phys_addr(new_gtd); - if (TUSB_XFER_BULK == xfer_type) OHCI_REG->command_status_bit.bulk_list_filled = 1; + if (TUSB_XFER_BULK == xfer_type) { + OHCI_REG->command_status_bit.bulk_list_filled = 1; + } } return true; @@ -593,12 +555,14 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { (void) rhport; ohci_ed_t * const p_ed = ed_from_addr(dev_addr, ep_addr); - ohci_ed_td_head td_head = hcd_dcache_uncached(p_ed->td_head); + ohci_ed_word2_t td_head = p_ed->td_head; td_head.toggle = 0; // reset data toggle td_head.halted = 0; - hcd_dcache_uncached(p_ed->td_head) = td_head; + p_ed->td_head = td_head; - if ( TUSB_XFER_BULK == ed_get_xfer_type(hcd_dcache_uncached(p_ed->w0)) ) OHCI_REG->command_status_bit.bulk_list_filled = 1; + if (TUSB_XFER_BULK == ed_get_xfer_type(p_ed->w0)) { + OHCI_REG->command_status_bit.bulk_list_filled = 1; + } return true; } @@ -632,13 +596,22 @@ static ohci_td_item_t* list_reverse(ohci_td_item_t* td_head) return _virt_addr(td_reverse_head); } -static inline bool gtd_is_control(ohci_gtd_t const * const p_qtd) -{ +TU_ATTR_ALWAYS_INLINE static inline bool gtd_is_control(ohci_gtd_t const * const p_qtd) { return ((uint32_t) p_qtd) < ((uint32_t) ohci_data.gtd_pool); // check ohci_data_t for memory layout } +TU_ATTR_ALWAYS_INLINE static inline ohci_ed_t* gtd_get_ed(ohci_gtd_t const* const p_qtd) { + ohci_ed_t* ed; + if (gtd_is_control(p_qtd)) { + ed = &ohci_data.control[p_qtd->index].ed; + } else { + ed = &ohci_data.ed_pool[p_qtd->index]; + } + return hcd_dcache_uncached(ed); +} + static gtd_extra_data_t *gtd_get_extra_data(ohci_gtd_t const * const gtd) { - if ( gtd_is_control(gtd) ) { + if (gtd_is_control(gtd)) { uint8_t idx = ((uintptr_t)gtd - (uintptr_t)&ohci_data.control->gtd) / sizeof(ohci_data.control[0]); return &ohci_data.gtd_extra_control[idx]; }else { @@ -646,85 +619,77 @@ static gtd_extra_data_t *gtd_get_extra_data(ohci_gtd_t const * const gtd) { } } -static inline uint32_t gtd_xfer_byte_left(uint32_t buffer_end, uint32_t current_buffer) -{ +TU_ATTR_ALWAYS_INLINE static inline uint32_t gtd_xfer_byte_left(uint32_t buffer_end, uint32_t current_buffer) { // 5.2.9 OHCI sample code - // CBP is 0 mean all data is transferred - if (current_buffer == 0) return 0; + if (current_buffer == 0) { + return 0; + } return (tu_align4k(buffer_end ^ current_buffer) ? 0x1000 : 0) + - tu_offset4k(buffer_end) - tu_offset4k(current_buffer) + 1; + tu_offset4k(buffer_end) - tu_offset4k(current_buffer) + 1; } -static void done_queue_isr(uint8_t hostid) -{ - (void) hostid; +static void done_queue_isr(uint8_t hostid) { + (void)hostid; // done head is written in reversed order of completion --> need to reverse the done queue first - ohci_td_item_t* td_head = list_reverse ( (ohci_td_item_t*) tu_align16(hcd_dcache_uncached(ohci_data.hcca).done_head) ); - hcd_dcache_uncached(ohci_data.hcca).done_head = 0; + ohci_td_item_t* td_head = list_reverse((ohci_td_item_t*)tu_align16(ohci_data.hcca.done_head)); + ohci_data.hcca.done_head = 0; - while( td_head != NULL ) - { + while (td_head != NULL) { // TODO check if td_head is iso td //------------- Non ISO transfer -------------// - ohci_gtd_t * const qtd = (ohci_gtd_t *) td_head; + ohci_gtd_t* const qtd = (ohci_gtd_t*) td_head; xfer_result_t const event = (qtd->condition_code == OHCI_CCODE_NO_ERROR) ? XFER_RESULT_SUCCESS : (qtd->condition_code == OHCI_CCODE_STALL) ? XFER_RESULT_STALLED : XFER_RESULT_FAILED; - - gtd_get_extra_data(qtd)->used = 0; // free TD - if ( (qtd->delay_interrupt == OHCI_INT_ON_COMPLETE_YES) || (event != XFER_RESULT_SUCCESS) ) - { - uint32_t const xferred_bytes = gtd_get_extra_data(qtd)->expected_bytes - gtd_xfer_byte_left((uint32_t) qtd->buffer_end, (uint32_t) qtd->current_buffer_pointer); - - hcd_event_xfer_complete(gtd_get_extra_data(qtd)->dev_addr, gtd_get_extra_data(qtd)->ep_addr, xferred_bytes, event, true); + qtd->used = 0; // free TD + if ((qtd->delay_interrupt == OHCI_INT_ON_COMPLETE_YES) || (event != XFER_RESULT_SUCCESS)) { + const ohci_ed_t* ed = gtd_get_ed(qtd); + const ohci_ed_word0_t ed_w0 = ed->w0; + const uint32_t xferred_bytes = gtd_get_extra_data(qtd)->expected_bytes - gtd_xfer_byte_left((uint32_t)qtd->buffer_end, (uint32_t)qtd->current_buffer_pointer); + uint8_t dir = (ed_w0.ep_number == 0) ? (qtd->pid == PID_IN) : (ed_w0.pid == PID_IN); + const uint8_t ep_addr = tu_edpt_addr(ed_w0.ep_number, dir); + hcd_event_xfer_complete(ed_w0.dev_addr, ep_addr, xferred_bytes, event, true); } - td_head = (ohci_td_item_t*) _virt_addr((void *)td_head->next); + td_head = (ohci_td_item_t*)_virt_addr((void*)td_head->next); } } void hcd_int_handler(uint8_t hostid, bool in_isr) { - (void) in_isr; - - uint32_t const int_en = OHCI_REG->interrupt_enable; + (void)in_isr; + uint32_t const int_en = OHCI_REG->interrupt_enable; uint32_t const int_status = OHCI_REG->interrupt_status & int_en; - if (int_status == 0) return; + if (int_status == 0) { + return; + } // Disable MIE as per OHCI spec 5.3 OHCI_REG->interrupt_disable = OHCI_INT_MASTER_ENABLE_MASK; // Frame number overflow - if ( int_status & OHCI_INT_FRAME_OVERFLOW_MASK ) - { + if (int_status & OHCI_INT_FRAME_OVERFLOW_MASK) { ohci_data.frame_number_hi++; } //------------- RootHub status -------------// - if ( int_status & OHCI_INT_RHPORT_STATUS_CHANGE_MASK ) - { - for (int i = 0; i < TUP_OHCI_RHPORTS; i++) - { + if (int_status & OHCI_INT_RHPORT_STATUS_CHANGE_MASK) { + for (int i = 0; i < TUP_OHCI_RHPORTS; i++) { uint32_t const rhport_status = OHCI_REG->rhport_status[i] & RHPORT_ALL_CHANGE_MASK; - if ( rhport_status & RHPORT_CONNECT_STATUS_CHANGE_MASK ) - { + if (rhport_status & RHPORT_CONNECT_STATUS_CHANGE_MASK) { // TODO check if remote wake-up - if ( OHCI_REG->rhport_status_bit[i].current_connect_status ) - { + if (OHCI_REG->rhport_status_bit[i].current_connect_status) { // TODO reset port immediately, without this controller will got 2-3 (debouncing connection status change) OHCI_REG->rhport_status[i] = RHPORT_PORT_RESET_STATUS_MASK; hcd_event_device_attach(i, true); - }else - { + } else { hcd_event_device_remove(i, true); } } - if ( rhport_status & RHPORT_PORT_SUSPEND_CHANGE_MASK) - { - + if (rhport_status & RHPORT_PORT_SUSPEND_CHANGE_MASK) { } OHCI_REG->rhport_status[i] = rhport_status; // acknowledge all interrupt @@ -732,13 +697,11 @@ void hcd_int_handler(uint8_t hostid, bool in_isr) { } //------------- Transfer Complete -------------// - if (int_status & OHCI_INT_WRITEBACK_DONEHEAD_MASK) - { + if (int_status & OHCI_INT_WRITEBACK_DONEHEAD_MASK) { done_queue_isr(hostid); } OHCI_REG->interrupt_status = int_status; // Acknowledge handled interrupt - OHCI_REG->interrupt_enable = OHCI_INT_MASTER_ENABLE_MASK; // Enable MIE } //--------------------------------------------------------------------+ diff --git a/src/portable/ohci/ohci.h b/src/portable/ohci/ohci.h index 78cac664e..ac5d2881b 100644 --- a/src/portable/ohci/ohci.h +++ b/src/portable/ohci/ohci.h @@ -79,12 +79,6 @@ TU_VERIFY_STATIC( sizeof(ohci_hcca_t) == 256, "size is not correct" ); // the _smallest_ amount that can be read/written at a time. If there were to be multiple TDs // in the same cache line, they would be required to always have the same logical ownership. // This ends up being impossible to guarantee, so we choose a design which avoids the situation entirely. -// -// TDs have a minimum alignment requirement according to the OHCI specification. This is 16 bytes for -// a general TD but 32 bytes for an isochronous TD. It happens that typical CPU cache line sizes are usually -// a power of 2 at least 32. In order to simplify code later in this file, we assume this -// as an additional requirement. -TU_VERIFY_STATIC( (CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 0) % 32 == 0, "cache line not multiple of 32" ); // common link item for gtd and itd for list travel // use as pointer only @@ -94,10 +88,12 @@ typedef struct TU_ATTR_ALIGNED(16) { uint32_t reserved2; }ohci_td_item_t; -typedef struct TU_ATTR_ALIGNED(CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 16) +typedef struct TU_ATTR_ALIGNED(TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 16)) { // Word 0 - uint32_t : 18; // can be used + uint32_t used : 1; + uint32_t index : 8; // endpoint index the gtd belongs to, or device address in case of control xfer + uint32_t : 9; // can be used uint32_t buffer_rounding : 1; uint32_t pid : 2; uint32_t delay_interrupt : 3; @@ -114,8 +110,7 @@ typedef struct TU_ATTR_ALIGNED(CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LI // Word 3 uint8_t* buffer_end; } ohci_gtd_t; - -TU_VERIFY_STATIC( sizeof(ohci_gtd_t) == CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 16, "size is not correct" ); +TU_VERIFY_STATIC(sizeof(ohci_gtd_t) == TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE,16), "size is not correct" ); typedef union { struct { @@ -126,13 +121,14 @@ typedef union { uint32_t skip : 1; uint32_t is_iso : 1; uint32_t max_packet_size : 11; - // HCD: make use of 5 reserved bits + // HCD: make use of 5 reserved bits uint32_t used : 1; uint32_t is_interrupt_xfer : 1; uint32_t : 3; }; - uint32_t u; -} ohci_ed_word0; + uint32_t value; +} ohci_ed_word0_t; +TU_VERIFY_STATIC(sizeof(ohci_ed_word0_t) == 4, "size is not correct" ); typedef union { uint32_t address; @@ -141,26 +137,18 @@ typedef union { uint32_t toggle : 1; uint32_t : 30; }; -} ohci_ed_td_head; - -typedef struct TU_ATTR_ALIGNED(16) -{ - // Word 0 - ohci_ed_word0 w0; - - // Word 1 - uint32_t td_tail; - - // Word 2 - volatile ohci_ed_td_head td_head; - - // Word 3: next ED - uint32_t next; +} ohci_ed_word2_t; +TU_VERIFY_STATIC(sizeof(ohci_ed_word2_t) == 4, "size is not correct" ); + +typedef struct TU_ATTR_ALIGNED(TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 16)) { + ohci_ed_word0_t w0; // Word 0 + uint32_t td_tail; // Word 1 + volatile ohci_ed_word2_t td_head; // Word 2 + uint32_t next; // Word 3 } ohci_ed_t; +TU_VERIFY_STATIC(sizeof(ohci_ed_t) == TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 16), "size is not correct" ); -TU_VERIFY_STATIC( sizeof(ohci_ed_t) == 16, "size is not correct" ); - -typedef struct TU_ATTR_ALIGNED(CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 32) +typedef struct TU_ATTR_ALIGNED(TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 32)) { /*---------- Word 1 ----------*/ uint32_t starting_frame : 16; @@ -183,15 +171,12 @@ typedef struct TU_ATTR_ALIGNED(CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LI volatile uint16_t offset_packetstatus[8]; } ochi_itd_t; -TU_VERIFY_STATIC( sizeof(ochi_itd_t) == CFG_TUH_MEM_DCACHE_ENABLE ? CFG_TUH_MEM_DCACHE_LINE_SIZE : 32, "size is not correct" ); +TU_VERIFY_STATIC(sizeof(ochi_itd_t) == TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 32), "size is not correct" ); typedef struct { uint16_t expected_bytes; // up to 8192 bytes so max is 13 bits - uint8_t dev_addr : 7; - uint8_t used : 1; - uint8_t ep_addr; } gtd_extra_data_t; -TU_VERIFY_STATIC( sizeof(gtd_extra_data_t) == 4, "size is not correct" ); +TU_VERIFY_STATIC(sizeof(gtd_extra_data_t) == 2, "size is not correct" ); // structure with member alignment required from large to small typedef struct TU_ATTR_ALIGNED(256) { -- cgit v1.3.1 From cc82e088b5333bae3dba8fb12965271d89cd5117 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 9 Oct 2025 18:50:04 +0700 Subject: fix todo size in list_reverse() --- src/portable/ohci/ohci.c | 22 +++++++++---------- src/portable/ohci/ohci.h | 55 ++++++++++++++++++++++++------------------------ 2 files changed, 38 insertions(+), 39 deletions(-) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index ee85f1b6a..ee89555a3 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -571,20 +571,18 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { //--------------------------------------------------------------------+ // OHCI Interrupt Handler //--------------------------------------------------------------------+ -static ohci_td_item_t* list_reverse(ohci_td_item_t* td_head) -{ - ohci_td_item_t* td_reverse_head = NULL; +TU_ATTR_ALWAYS_INLINE static inline bool is_itd(ohci_td_item_t* item) { + (void) item; + return false; // ISO not supported yet +} - while(td_head != NULL) - { +static ohci_td_item_t* list_reverse(ohci_td_item_t* td_head) { + ohci_td_item_t* td_reverse_head = NULL; + while(td_head != NULL) { td_head = _virt_addr(td_head); - // FIXME: This is not the correct object size. - // However, because we have hardcoded the assumption that - // a cache line is at least 32 bytes (in ohci.h), and - // because both types of TD structs are <= 32 bytes, this - // nonetheless still works without error. - hcd_dcache_invalidate(td_head, sizeof(ohci_td_item_t)); - uint32_t next = td_head->next; + const uint32_t item_size = is_itd(td_head) ? sizeof(ohci_itd_t) : sizeof(ohci_gtd_t); + hcd_dcache_invalidate(td_head, item_size); + const uint32_t next = td_head->next; // make current's item become reverse's first item td_head->next = (uint32_t) td_reverse_head; diff --git a/src/portable/ohci/ohci.h b/src/portable/ohci/ohci.h index ac5d2881b..a6f31c7a5 100644 --- a/src/portable/ohci/ohci.h +++ b/src/portable/ohci/ohci.h @@ -48,6 +48,10 @@ enum { // tinyUSB's OHCI implementation caps number of EDs to 8 bits TU_VERIFY_STATIC (ED_MAX <= 256, "Reduce CFG_TUH_DEVICE_MAX or CFG_TUH_ENDPOINT_MAX"); +#define GTD_ALIGN_SIZE TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 16) +#define ED_ALIGN_SIZE TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 16) +#define ITD_ALIGN_SIZE TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 32) + //--------------------------------------------------------------------+ // OHCI Data Structure //--------------------------------------------------------------------+ @@ -81,17 +85,15 @@ TU_VERIFY_STATIC( sizeof(ohci_hcca_t) == 256, "size is not correct" ); // This ends up being impossible to guarantee, so we choose a design which avoids the situation entirely. // common link item for gtd and itd for list travel -// use as pointer only typedef struct TU_ATTR_ALIGNED(16) { uint32_t reserved[2]; volatile uint32_t next; uint32_t reserved2; }ohci_td_item_t; -typedef struct TU_ATTR_ALIGNED(TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 16)) -{ - // Word 0 - uint32_t used : 1; +typedef struct TU_ATTR_ALIGNED(GTD_ALIGN_SIZE) { + // Word 0 + uint32_t used : 1; uint32_t index : 8; // endpoint index the gtd belongs to, or device address in case of control xfer uint32_t : 9; // can be used uint32_t buffer_rounding : 1; @@ -101,16 +103,16 @@ typedef struct TU_ATTR_ALIGNED(TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 16)) volatile uint32_t error_count : 2; volatile uint32_t condition_code : 4; - // Word 1 - uint8_t* volatile current_buffer_pointer; + // Word 1 + uint8_t* volatile current_buffer_pointer; - // Word 2 : next TD - volatile uint32_t next; + // Word 2 : next TD + volatile uint32_t next; - // Word 3 - uint8_t* buffer_end; + // Word 3 + uint8_t* buffer_end; } ohci_gtd_t; -TU_VERIFY_STATIC(sizeof(ohci_gtd_t) == TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE,16), "size is not correct" ); +TU_VERIFY_STATIC(sizeof(ohci_gtd_t) == GTD_ALIGN_SIZE, "size is not correct" ); typedef union { struct { @@ -140,17 +142,16 @@ typedef union { } ohci_ed_word2_t; TU_VERIFY_STATIC(sizeof(ohci_ed_word2_t) == 4, "size is not correct" ); -typedef struct TU_ATTR_ALIGNED(TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 16)) { +typedef struct TU_ATTR_ALIGNED(ED_ALIGN_SIZE) { ohci_ed_word0_t w0; // Word 0 uint32_t td_tail; // Word 1 volatile ohci_ed_word2_t td_head; // Word 2 uint32_t next; // Word 3 } ohci_ed_t; -TU_VERIFY_STATIC(sizeof(ohci_ed_t) == TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 16), "size is not correct" ); +TU_VERIFY_STATIC(sizeof(ohci_ed_t) == ED_ALIGN_SIZE, "size is not correct" ); -typedef struct TU_ATTR_ALIGNED(TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 32)) -{ - /*---------- Word 1 ----------*/ +typedef struct TU_ATTR_ALIGNED(ITD_ALIGN_SIZE) { + /*---------- Word 1 ----------*/ uint32_t starting_frame : 16; uint32_t : 5; // can be used uint32_t delay_interrupt : 3; @@ -158,20 +159,20 @@ typedef struct TU_ATTR_ALIGNED(TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 32)) uint32_t : 1; // can be used volatile uint32_t condition_code : 4; - /*---------- Word 2 ----------*/ - uint32_t buffer_page0; // 12 lsb bits can be used - /*---------- Word 3 ----------*/ - volatile uint32_t next; + /*---------- Word 2 ----------*/ + uint32_t buffer_page0; // 12 lsb bits can be used - /*---------- Word 4 ----------*/ - uint32_t buffer_end; + /*---------- Word 3 ----------*/ + volatile uint32_t next; - /*---------- Word 5-8 ----------*/ - volatile uint16_t offset_packetstatus[8]; -} ochi_itd_t; + /*---------- Word 4 ----------*/ + uint32_t buffer_end; -TU_VERIFY_STATIC(sizeof(ochi_itd_t) == TU_MAX(CFG_TUH_MEM_DCACHE_LINE_SIZE, 32), "size is not correct" ); + /*---------- Word 5-8 ----------*/ + volatile uint16_t offset_packetstatus[8]; +} ohci_itd_t; +TU_VERIFY_STATIC(sizeof(ohci_itd_t) == ITD_ALIGN_SIZE, "size is not correct" ); typedef struct { uint16_t expected_bytes; // up to 8192 bytes so max is 13 bits -- cgit v1.3.1 From 83baf13dcbde66942419c03348cc88ef22575e32 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 10 Oct 2025 12:33:41 +0700 Subject: try to enable ohci for lpc55 but not working, probably clock issue --- README.rst | 8 +-- hw/bsp/lpc17/family.cmake | 1 - hw/bsp/lpc17/family.mk | 1 - hw/bsp/lpc40/family.cmake | 1 - hw/bsp/lpc40/family.mk | 1 - hw/bsp/lpc55/boards/double_m33_express/board.cmake | 5 -- hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake | 5 -- hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake | 5 -- hw/bsp/lpc55/family.c | 74 ++++++++++++++++------ hw/bsp/lpc55/family.cmake | 46 +++++++++----- src/common/tusb_mcu.h | 5 ++ src/portable/nxp/lpc17_40/hcd_lpc17_40.c | 48 -------------- src/portable/ohci/ohci.c | 11 +++- src/portable/ohci/ohci.h | 49 +++++++------- src/portable/ohci/ohci_nxp.h | 70 ++++++++++++++++++++ 15 files changed, 196 insertions(+), 134 deletions(-) delete mode 100644 src/portable/nxp/lpc17_40/hcd_lpc17_40.c create mode 100644 src/portable/ohci/ohci_nxp.h diff --git a/README.rst b/README.rst index 03ad3744c..7165b72ed 100644 --- a/README.rst +++ b/README.rst @@ -160,7 +160,7 @@ Supported CPUs | +-----------------------------+--------+------+-----------+------------------------+-------------------+ | | NUC505 | ✔ | | ✔ | nuc505 | | +--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs | | +| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs, ehci | | | +---------+-------------------+--------+------+-----------+------------------------+-------------------+ | | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ @@ -168,15 +168,15 @@ Supported CPUs | +---------+-------------------+--------+------+-----------+------------------------+-------------------+ | | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40 | | +| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40, ohci | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs | | +| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs, ehci | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ | | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ | | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | | +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs | | +| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs, ehci | | | | +-------------------+--------+------+-----------+------------------------+-------------------+ | | | A15 | ✔ | | | ci_fs | | +--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ diff --git a/hw/bsp/lpc17/family.cmake b/hw/bsp/lpc17/family.cmake index 771a0f405..c18a10e24 100644 --- a/hw/bsp/lpc17/family.cmake +++ b/hw/bsp/lpc17/family.cmake @@ -89,7 +89,6 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_LPC175X_6X) target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c - ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) target_link_libraries(${TARGET} PUBLIC board_${BOARD}) diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk index e8d707ea5..f1ed1a7d0 100644 --- a/hw/bsp/lpc17/family.mk +++ b/hw/bsp/lpc17/family.mk @@ -20,7 +20,6 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c \ src/portable/ohci/ohci.c \ $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index 3a680eae6..439b27491 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -90,7 +90,6 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_LPC40XX) target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c - ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) target_link_libraries(${TARGET} PUBLIC board_${BOARD}) diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index c72631235..c21923000 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -18,7 +18,6 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs # All source paths should be relative to the top level. SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c \ src/portable/ohci/ohci.c \ $(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ diff --git a/hw/bsp/lpc55/boards/double_m33_express/board.cmake b/hw/bsp/lpc55/boards/double_m33_express/board.cmake index 3324ce888..186655b5a 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/board.cmake +++ b/hw/bsp/lpc55/boards/double_m33_express/board.cmake @@ -7,11 +7,6 @@ set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/LPC55S69_cm33_core0_uf2.ld) -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) - set(PORT 1) -endif() - function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S69JBD100_cm33_core0 diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake index b3d0c3349..d935b70e6 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake @@ -5,11 +5,6 @@ set(JLINK_DEVICE LPC55S28) set(PYOCD_TARGET LPC55S28) set(NXPLINK_DEVICE LPC55S28:LPCXpresso55S28) -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) - set(PORT 1) -endif() - function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S28JBD100 diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake index b52ec2f9d..f46775b27 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake @@ -5,11 +5,6 @@ set(JLINK_DEVICE LPC55S69_M33_0) set(PYOCD_TARGET LPC55S69) set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) - set(PORT 1) -endif() - function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S69JBD100_cm33_core0 diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index dbf8d71b7..b2e219382 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -55,6 +55,7 @@ #define IOCON_PIO_MODE_INACT 0x00u // No addition pin function #define IOCON_PIO_OPENDRAIN_DI 0x00u // Open drain is disabled #define IOCON_PIO_SLEW_STANDARD 0x00u // Standard mode, output slew rate control is enabled +#define IOCON_PIO_MODE_PULLUP 0x20u /*!<@brief Selects pull-up function */ #define IOCON_PIO_DIG_FUNC0_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC0) // Digital pin function 0 enabled #define IOCON_PIO_DIG_FUNC1_EN (IOCON_PIO_DIGITAL_EN | IOCON_PIO_FUNC1) // Digital pin function 1 enabled @@ -197,13 +198,14 @@ void board_init(void) { USART_Init(UART_DEV, &uart_config, 12000000); #endif - // USB VBUS +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 0) /* PORT0 PIN22 configured as USB0_VBUS */ IOCON_PinMuxSet(IOCON, 0U, 22U, IOCON_PIO_DIG_FUNC7_EN); - -#if defined(BOARD_TUD_RHPORT) && BOARD_TUD_RHPORT == 0 // Port0 is Full Speed + NVIC_ClearPendingIRQ(USB0_IRQn); + NVIC_ClearPendingIRQ(USB0_NEEDCLK_IRQn); + /* Turn on USB0 Phy */ POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); @@ -212,21 +214,55 @@ void board_init(void) { RESET_PeripheralReset(kUSB0HSL_RST_SHIFT_RSTn); RESET_PeripheralReset(kUSB0HMR_RST_SHIFT_RSTn); - // Enable USB Clock Adjustments to trim the FRO for the full speed controller - ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; - CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); - CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); - - /*According to reference manual, device mode setting has to be set by access usb host register */ - CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock - USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; - CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock - - /* enable USB Device clock */ - CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); + if (BOARD_TUD_RHPORT == 0) { + // Enable USB Clock Adjustments to trim the FRO for the full speed controller + ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); + CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); + + /*According to reference manual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock + USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; + CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock + /* enable USB Device clock */ + CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); + } else { + const uint32_t port1_pin12_config = (/* Pin is configured as USB0_PORTPWRN */ + IOCON_PIO_FUNC4 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT1 PIN12 (coords: 67) is configured as USB0_PORTPWRN */ + IOCON_PinMuxSet(IOCON, 1U, 12U, port1_pin12_config); + + const uint32_t port0_pin28_config = (/* Pin is configured as USB0_OVERCURRENTN */ + IOCON_PIO_FUNC7 | + /* Selects pull-up function */ + IOCON_PIO_MODE_PULLUP | + /* Standard mode, output slew rate control is enabled */ + IOCON_PIO_SLEW_STANDARD | + /* Input function is not inverted */ + IOCON_PIO_INV_DI | + /* Enables digital function */ + IOCON_PIO_DIGITAL_EN | + /* Open drain is disabled */ + IOCON_PIO_OPENDRAIN_DI); + /* PORT0 PIN28 (coords: 66) is configured as USB0_OVERCURRENTN */ + IOCON_PinMuxSet(IOCON, 0U, 28U, port0_pin28_config); + + CLOCK_EnableUsbfs0HostClock(kCLOCK_UsbfsSrcPll1, 48000000U); + USBFSH->PORTMODE &= ~USBFSH_PORTMODE_DEV_ENABLE_MASK; + } #endif -#if defined(BOARD_TUD_RHPORT) && BOARD_TUD_RHPORT == 1 +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1) // Port1 is High Speed /* Turn on USB1 Phy */ @@ -266,9 +302,9 @@ void board_init(void) { // phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); // USBPHY->TX = phytx; - ARM_MPU_SetMemAttr(0, 0x44); // Normal memory, non-cacheable (inner and outer) - ARM_MPU_SetRegion(0, ARM_MPU_RBAR(0x40100000, ARM_MPU_SH_NON, 0, 1, 1), ARM_MPU_RLAR(0x40104000, 0)); - ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk | MPU_CTRL_HFNMIENA_Msk); + ARM_MPU_SetMemAttr(0, 0x44); // Normal memory, non-cacheable (inner and outer) + ARM_MPU_SetRegion(0, ARM_MPU_RBAR(0x40100000, ARM_MPU_SH_NON, 0, 1, 1), ARM_MPU_RLAR(0x40104000, 0)); + ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk | MPU_CTRL_HFNMIENA_Msk); #endif } diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index a89548635..506164d9d 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -12,12 +12,29 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS LPC55 CACHE INTERNAL "") -if (NOT DEFINED PORT) - set(PORT 0) -endif() - -# Host port will be the other port if available -set(HOST_PORT $) +# ---------------------- +# Port & Speed Selection +# ---------------------- + +# default device port to USB1 highspeed, host to USB0 fullspeed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + +# port 0 is fullspeed, port 1 is highspeed +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ # BOARD_TARGET @@ -67,22 +84,20 @@ function(add_board_target BOARD_TARGET) ) target_compile_definitions(${BOARD_TARGET} PUBLIC CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) - BOARD_TUD_RHPORT=${PORT} - BOARD_TUH_RHPORT=${HOST_PORT} + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} __STARTUP_CLEAR_BSS ) # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM - if (PORT EQUAL 1) + if (RHPORT_DEVICE EQUAL 1) target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - BOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) ) - else () + elseif (RHPORT_HOST EQUAL 1) target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED - BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED CFG_TUH_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) ) endif () @@ -143,11 +158,10 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_LPC55) target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c + ${TOP}/src/portable/ohci/ohci.c ) target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - - # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 1c11df114..03062beb8 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -64,6 +64,7 @@ #elif TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) #define TUP_DCD_ENDPOINT_MAX 16 #define TUP_USBIP_OHCI + #define TUP_USBIP_OHCI_NXP #define TUP_OHCI_RHPORTS 2 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX) @@ -78,6 +79,10 @@ #elif TU_CHECK_MCU(OPT_MCU_LPC55) // TODO USB0 has 5, USB1 has 6 #define TUP_USBIP_IP3511 + #define TUP_USBIP_OHCI + #define TUP_USBIP_OHCI_NXP + #define TUP_OHCI_RHPORTS 1 // 1 downstream port + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) diff --git a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c b/src/portable/nxp/lpc17_40/hcd_lpc17_40.c deleted file mode 100644 index fea3e2a66..000000000 --- a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -#if CFG_TUH_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX) - -#include "chip.h" -#include "host/hcd.h" -#include "host/usbh.h" - -void hcd_int_enable(uint8_t rhport) -{ - (void) rhport; - NVIC_EnableIRQ(USB_IRQn); -} - -void hcd_int_disable(uint8_t rhport) -{ - (void) rhport; - NVIC_DisableIRQ(USB_IRQn); -} - -#endif diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index f1689b5b4..a12f7d6ed 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -41,13 +41,16 @@ #include "host/usbh.h" #include "ohci.h" -// TODO remove -#include "chip.h" +#if defined(TUP_USBIP_OHCI_NXP) + #include "ohci_nxp.h" +#else + #error Unsupported OHCI IP +#endif //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -#define OHCI_REG ((ohci_registers_t *) LPC_USB_BASE) + enum { OHCI_CONTROL_FUNCSTATE_RESET = 0, @@ -181,6 +184,8 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; (void) rh_init; + ohci_phy_init(rhport); + //------------- Data Structure init -------------// tu_memclr(&ohci_data, sizeof(ohci_data_t)); for(uint8_t i=0; i<32; i++) diff --git a/src/portable/ohci/ohci.h b/src/portable/ohci/ohci.h index 94bad5df7..bddb19561 100644 --- a/src/portable/ohci/ohci.h +++ b/src/portable/ohci/ohci.h @@ -192,10 +192,10 @@ typedef struct TU_ATTR_ALIGNED(256) { //--------------------------------------------------------------------+ typedef volatile struct { - uint32_t revision; + uint32_t revision; // 0x00 union { - uint32_t control; + uint32_t control; // 0x04 struct { uint32_t control_bulk_service_ratio : 2; uint32_t periodic_list_enable : 1; @@ -211,7 +211,7 @@ typedef volatile struct }; union { - uint32_t command_status; + uint32_t command_status; // 0x08 struct { uint32_t controller_reset : 1; uint32_t control_list_filled : 1; @@ -222,26 +222,24 @@ typedef volatile struct }command_status_bit; }; - uint32_t interrupt_status; - uint32_t interrupt_enable; - uint32_t interrupt_disable; - - uint32_t hcca; - uint32_t period_current_ed; - uint32_t control_head_ed; - uint32_t control_current_ed; - uint32_t bulk_head_ed; - uint32_t bulk_current_ed; - uint32_t done_head; - - uint32_t frame_interval; - uint32_t frame_remaining; - uint32_t frame_number; - uint32_t periodic_start; - uint32_t lowspeed_threshold; + uint32_t interrupt_status; // 0x0C + uint32_t interrupt_enable; // 0x10 + uint32_t interrupt_disable; // 0x14 + uint32_t hcca; // 0x18 + uint32_t period_current_ed; // 0x1C + uint32_t control_head_ed; // 0x20 + uint32_t control_current_ed; // 0x24 + uint32_t bulk_head_ed; // 0x28 + uint32_t bulk_current_ed; // 0x2C + uint32_t done_head; // 0x30 + uint32_t frame_interval; // 0x34 + uint32_t frame_remaining; // 0x38 + uint32_t frame_number; // 0x3C + uint32_t periodic_start; // 0x40 + uint32_t lowspeed_threshold; // 0x44 union { - uint32_t rh_descriptorA; + uint32_t rh_descriptorA; // 0x48 struct { uint32_t number_downstream_ports : 8; uint32_t power_switching_mode : 1; @@ -255,7 +253,7 @@ typedef volatile struct }; union { - uint32_t rh_descriptorB; + uint32_t rh_descriptorB; // 0x4C struct { uint32_t device_removable : 16; uint32_t port_power_control_mask : 16; @@ -263,9 +261,9 @@ typedef volatile struct }; union { - uint32_t rh_status; + uint32_t rh_status; // 0x50 struct { - uint32_t local_power_status : 1; // read Local Power Status; write: Clear Global Power + uint32_t local_power_status : 1; // read Local Power Status; write: Clear Global Power uint32_t over_current_indicator : 1; uint32_t : 13; uint32_t device_remote_wakeup_enable : 1; @@ -277,7 +275,8 @@ typedef volatile struct }; union { - uint32_t rhport_status[TUP_OHCI_RHPORTS]; + uint32_t rhport_status[TUP_OHCI_RHPORTS]; // 0x54 + struct { uint32_t current_connect_status : 1; uint32_t port_enable_status : 1; diff --git a/src/portable/ohci/ohci_nxp.h b/src/portable/ohci/ohci_nxp.h new file mode 100644 index 000000000..9cba05e95 --- /dev/null +++ b/src/portable/ohci/ohci_nxp.h @@ -0,0 +1,70 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef TUSB_OHCI_NXP_H +#define TUSB_OHCI_NXP_H + +#if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) + +#include "chip.h" +#define OHCI_REG ((ohci_registers_t *) LPC_USB_BASE) + +void hcd_int_enable(uint8_t rhport) { + (void)rhport; + NVIC_EnableIRQ(USB_IRQn); +} + +void hcd_int_disable(uint8_t rhport) { + (void)rhport; + NVIC_DisableIRQ(USB_IRQn); +} + +static void ohci_phy_init(uint8_t rhport) { + (void) rhport; +} + +#else + +#include "fsl_device_registers.h" + +// for LPC55 USB0 controller +#define OHCI_REG ((ohci_registers_t *) USBFSH_BASE) + +static void ohci_phy_init(uint8_t rhport) { + (void) rhport; +} + +void hcd_int_enable(uint8_t rhport) { + (void)rhport; + NVIC_EnableIRQ(USB0_IRQn); +} + +void hcd_int_disable(uint8_t rhport) { + (void)rhport; + NVIC_DisableIRQ(USB0_IRQn); +} +#endif + +#endif -- cgit v1.3.1 From 10e86b012f435afacc673b18cea5b54b8585bde9 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 11 Oct 2025 18:51:36 +0700 Subject: correct l496zg variant, fix build warning --- .../boards/stm32l496nucleo/STM32L496XX_FLASH.ld | 207 -------------------- .../boards/stm32l496nucleo/STM32L496ZGTX_FLASH.ld | 208 +++++++++++++++++++++ hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake | 4 +- hw/bsp/stm32l4/boards/stm32l496nucleo/board.h | 2 +- hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk | 4 +- 5 files changed, 213 insertions(+), 212 deletions(-) delete mode 100644 hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld create mode 100644 hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496ZGTX_FLASH.ld diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld deleted file mode 100644 index 5aa932e20..000000000 --- a/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496XX_FLASH.ld +++ /dev/null @@ -1,207 +0,0 @@ -/* -****************************************************************************** -** - -** File : LinkerScript.ld -** -** Author : STM32CubeMX -** -** Abstract : Linker script for STM32L496ZGTxP series -** 1024Kbytes FLASH and 320Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** Distribution: The file is distributed “as is,” without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2025 STMicroelectronics

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of STMicroelectronics nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x500; /* required amount of heap */ -_Min_Stack_Size = 0x1000; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K -RAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 64K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K -} - -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */ - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(8); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(8); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(8); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(8); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(8); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(8); - } >FLASH - - .ARM.extab : - { - . = ALIGN(8); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(8); - } >FLASH - - .ARM : - { - . = ALIGN(8); - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - . = ALIGN(8); - } >FLASH - - .preinit_array : - { - . = ALIGN(8); - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(8); - } >FLASH - - .init_array : - { - . = ALIGN(8); - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(8); - } >FLASH - - .fini_array : - - { - . = ALIGN(8); - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(8); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(8); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - *(.RamFunc) /* .RamFunc sections */ - *(.RamFunc*) /* .RamFunc* sections */ - - . = ALIGN(8); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - -} diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496ZGTX_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496ZGTX_FLASH.ld new file mode 100644 index 000000000..fcd5daee3 --- /dev/null +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/STM32L496ZGTX_FLASH.ld @@ -0,0 +1,208 @@ +/* +****************************************************************************** +** +** @file : LinkerScript.ld +** +** @author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for NUCLEO-L496ZG Board embedding STM32L496ZGTx Device from stm32l4 series +** 1024Kbytes ROM +** 256Kbytes RAM +** 64Kbytes SRAM2 +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +****************************************************************************** +** @attention +** +** Copyright (c) 2022 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K + SRAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 64K + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 1024K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "ROM" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >ROM + + /* The program code and other data into "ROM" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >ROM + + /* Constant data into "ROM" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >ROM + + .ARM.extab : + { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >ROM + + .ARM : + { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >ROM + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >ROM + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >ROM + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >ROM + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> ROM + + _sisram2 = LOADADDR(.sram2); + + /* SRAM2 section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .sram2 : + { + . = ALIGN(4); + _ssram2 = .; /* create a global symbol at sram2 start */ + *(.sram2) + *(.sram2*) + + . = ALIGN(4); + _esram2 = .; /* create a global symbol at sram2 end */ + } >SRAM2 AT> ROM + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake index 78c0423a8..bfa8261b9 100644 --- a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.cmake @@ -1,7 +1,7 @@ set(MCU_VARIANT stm32l496xx) -set(JLINK_DEVICE stm32l496kb) +set(JLINK_DEVICE stm32l496zg) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L496XX_FLASH.ld) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L496ZGTX_FLASH.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h index 175ebabda..607210cec 100644 --- a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.h @@ -79,7 +79,6 @@ static inline void board_clock_init(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_CRSInitTypeDef RCC_CRSInitStruct = {0}; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; /** Configure the main internal regulator output voltage @@ -125,6 +124,7 @@ static inline void board_clock_init(void) // // /** Configures CRS // */ + // RCC_CRSInitTypeDef RCC_CRSInitStruct = {0}; // RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; // RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; // RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING; diff --git a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk index 290c4f908..bc0a63c1c 100644 --- a/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk +++ b/hw/bsp/stm32l4/boards/stm32l496nucleo/board.mk @@ -3,11 +3,11 @@ CFLAGS += \ # GCC SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l496xx.s -LD_FILE_GCC = $(BOARD_PATH)/STM32L496KBUx_FLASH.ld +LD_FILE_GCC = $(BOARD_PATH)/STM32L496ZGTX_FLASH.ld # IAR SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l496xx.s LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l496xx_flash.icf # For flash-jlink target -JLINK_DEVICE = stm32l496xx +JLINK_DEVICE = stm32l496zg -- cgit v1.3.1 From 080ca2e5cc96ffde2820807e2e663e1c61ca5132 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 11 Oct 2025 16:49:42 +0200 Subject: Move control buffer out of USB section Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index dcdc0d4a9..50ed23eb8 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -182,9 +182,7 @@ tu_static CFG_TUD_MEM_SECTION struct { #endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && USE_LINEAR_BUFFER // Control buffer -tu_static CFG_TUD_MEM_SECTION struct { - TUD_EPBUF_DEF(buf, CFG_TUD_AUDIO_CTRL_BUF_SZ); -} ctrl_buf; +CFG_TUD_MEM_ALIGN uint8_t ctrl_buf[CFG_TUD_AUDIO_CTRL_BUF_SZ]; // Aligned buffer for feedback EP #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -1314,20 +1312,20 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const if (tud_audio_n_version(func_id) == 2) { uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf.buf); + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf); audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } #endif // Invoke callback - return tud_audio_set_req_entity_cb(rhport, p_request, ctrl_buf.buf); + return tud_audio_set_req_entity_cb(rhport, p_request, ctrl_buf); } else { // Find index of audio driver structure and verify interface really exists TU_VERIFY(audiod_verify_itf_exists(itf, &func_id)); // Invoke callback - return tud_audio_set_req_itf_cb(rhport, p_request, ctrl_buf.buf); + return tud_audio_set_req_itf_cb(rhport, p_request, ctrl_buf); } } break; @@ -1342,7 +1340,7 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const if (_audiod_fct[func_id].ep_in == ep) { uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (ctrlSel == AUDIO10_EP_CTRL_SAMPLING_FREQ && p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf.buf) & 0x00FFFFFF; + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf) & 0x00FFFFFF; audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } @@ -1350,7 +1348,7 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const #endif // Invoke callback - bool ret = tud_audio_set_req_ep_cb(rhport, p_request, ctrl_buf.buf); + bool ret = tud_audio_set_req_ep_cb(rhport, p_request, ctrl_buf); #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP if (ret && tud_audio_n_version(func_id) == 1) { @@ -1447,7 +1445,7 @@ static bool audiod_control_request(uint8_t rhport, tusb_control_request_t const } // If we end here, the received request is a set request - we schedule a receive for the data stage and return true here. We handle the rest later in audiod_control_complete() once the data stage was finished - TU_VERIFY(tud_control_xfer(rhport, p_request, ctrl_buf.buf, sizeof(ctrl_buf.buf))); + TU_VERIFY(tud_control_xfer(rhport, p_request, ctrl_buf, sizeof(ctrl_buf))); return true; } @@ -1708,10 +1706,10 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req } // Crop length - if (len > sizeof(ctrl_buf.buf)) len = sizeof(ctrl_buf.buf); + if (len > sizeof(ctrl_buf)) len = sizeof(ctrl_buf); // Copy into buffer - TU_VERIFY(0 == tu_memcpy_s(ctrl_buf.buf, sizeof(ctrl_buf.buf), data, (size_t) len)); + TU_VERIFY(0 == tu_memcpy_s(ctrl_buf, sizeof(ctrl_buf), data, (size_t) len)); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL if (tud_audio_n_version(func_id) == 2) { @@ -1720,7 +1718,7 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req uint8_t entityID = TU_U16_HIGH(p_request->wIndex); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf.buf); + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf); audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } @@ -1728,7 +1726,7 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req #endif // Schedule transmit - return tud_control_xfer(rhport, p_request, ctrl_buf.buf, len); + return tud_control_xfer(rhport, p_request, ctrl_buf, len); } // Verify an entity with the given ID exists and returns also the corresponding driver index -- cgit v1.3.1 From ee7a7c56db8d6429e9df2bf042cbbe638210100d Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 13 Oct 2025 12:41:55 +0700 Subject: get cmake build with 54h20 not tested on actual hw, probably not running --- hw/bsp/nrf/boards/nrf52833dk/board.cmake | 4 + hw/bsp/nrf/boards/nrf52833dk/board.h | 57 ++++++++++++ hw/bsp/nrf/boards/nrf52833dk/board.mk | 7 ++ hw/bsp/nrf/boards/nrf54h20dk/board.cmake | 11 +++ hw/bsp/nrf/boards/nrf54h20dk/board.h | 65 ++++++++++++++ hw/bsp/nrf/boards/nrf54h20dk/board.mk | 16 ++++ hw/bsp/nrf/boards/pca10095/board.cmake | 3 +- hw/bsp/nrf/boards/pca10095/board.mk | 1 - hw/bsp/nrf/boards/pca10100/board.cmake | 4 - hw/bsp/nrf/boards/pca10100/board.h | 57 ------------ hw/bsp/nrf/boards/pca10100/board.mk | 7 -- hw/bsp/nrf/family.c | 90 +++++++------------ hw/bsp/nrf/family.cmake | 69 +++++++++------ hw/bsp/nrf/family.mk | 10 ++- hw/bsp/nrf/linker/nrf52833_xxaa.ld | 6 -- hw/bsp/nrf/linker/nrf52840_s140_v6.ld | 6 -- hw/bsp/nrf/linker/nrf52840_xxaa.ld | 6 -- hw/bsp/nrf/linker/nrf5340_xxaa_application.ld | 6 -- hw/bsp/nrf/linker/nrf54h20_xxaa_application.ld | 21 +++++ hw/bsp/nrf/nrfx_config/nrfx_config.h | 115 +++++++++++++++++++------ hw/bsp/nrf/nrfx_config/nrfx_config_common.h | 86 ++++++++++++++++++ hw/bsp/nrf/nrfx_config/nrfx_config_ext.h | 39 +++++++++ src/common/tusb_mcu.h | 6 ++ src/portable/synopsys/dwc2/dwc2_common.h | 2 + src/portable/synopsys/dwc2/dwc2_nrf.h | 61 +++++++++++++ src/tusb_option.h | 3 +- tools/get_deps.py | 2 +- 27 files changed, 555 insertions(+), 205 deletions(-) create mode 100644 hw/bsp/nrf/boards/nrf52833dk/board.cmake create mode 100644 hw/bsp/nrf/boards/nrf52833dk/board.h create mode 100644 hw/bsp/nrf/boards/nrf52833dk/board.mk create mode 100644 hw/bsp/nrf/boards/nrf54h20dk/board.cmake create mode 100644 hw/bsp/nrf/boards/nrf54h20dk/board.h create mode 100644 hw/bsp/nrf/boards/nrf54h20dk/board.mk delete mode 100644 hw/bsp/nrf/boards/pca10100/board.cmake delete mode 100644 hw/bsp/nrf/boards/pca10100/board.h delete mode 100644 hw/bsp/nrf/boards/pca10100/board.mk create mode 100644 hw/bsp/nrf/linker/nrf54h20_xxaa_application.ld create mode 100644 hw/bsp/nrf/nrfx_config/nrfx_config_common.h create mode 100644 hw/bsp/nrf/nrfx_config/nrfx_config_ext.h create mode 100644 src/portable/synopsys/dwc2/dwc2_nrf.h diff --git a/hw/bsp/nrf/boards/nrf52833dk/board.cmake b/hw/bsp/nrf/boards/nrf52833dk/board.cmake new file mode 100644 index 000000000..a925dae80 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52833dk/board.cmake @@ -0,0 +1,4 @@ +set(MCU_VARIANT nrf52833) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/nrf52833dk/board.h b/hw/bsp/nrf/boards/nrf52833dk/board.h new file mode 100644 index 000000000..8aca6dce9 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52833dk/board.h @@ -0,0 +1,57 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Nordic nRF52833 DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN 13 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN 11 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/nrf52833dk/board.mk b/hw/bsp/nrf/boards/nrf52833dk/board.mk new file mode 100644 index 000000000..5fba269b7 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52833dk/board.mk @@ -0,0 +1,7 @@ +MCU_VARIANT = nrf52833 +CFLAGS += -DNRF52833_XXAA + +LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/nrf/boards/nrf54h20dk/board.cmake b/hw/bsp/nrf/boards/nrf54h20dk/board.cmake new file mode 100644 index 000000000..fca7a56d2 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf54h20dk/board.cmake @@ -0,0 +1,11 @@ +set(MCU_VARIANT nrf54h20) + +function(update_board TARGET) + # temporarily, 54h20 has multiple sram sections + target_compile_definitions(${TARGET} PUBLIC + CFG_EXAMPLE_VIDEO_READONLY + ) + target_sources(${TARGET} PRIVATE +# ${NRFX_PATH}/drivers/src/nrfx_usbreg.c + ) +endfunction() diff --git a/hw/bsp/nrf/boards/nrf54h20dk/board.h b/hw/bsp/nrf/boards/nrf54h20dk/board.h new file mode 100644 index 000000000..1c7981049 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf54h20dk/board.h @@ -0,0 +1,65 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Nordic nRF5340 DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN 28 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN 23 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 22 +#define UART_TX_PIN 20 + +// SPI for USB host shield +// Pin is correct but not working probably due to signal incompatible (1.8V 3v3) with MAC3421E !? +//#define MAX3421_SCK_PIN _PINNUM(1, 15) +//#define MAX3421_MOSI_PIN _PINNUM(1, 13) +//#define MAX3421_MISO_PIN _PINNUM(1, 14) +//#define MAX3421_CS_PIN _PINNUM(1, 12) +//#define MAX3421_INTR_PIN _PINNUM(1, 11) + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/nrf54h20dk/board.mk b/hw/bsp/nrf/boards/nrf54h20dk/board.mk new file mode 100644 index 000000000..157ba3c36 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf54h20dk/board.mk @@ -0,0 +1,16 @@ +MCU_VARIANT = nrf54h20_application +CFLAGS += -DNRF54H20_XXAA + +# enable max3421 host driver for this board +MAX3421_HOST = 1 + +LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf5340_xxaa_application.ld + +SRC_C += hw/mcu/nordic/nrfx/drivers/src/nrfx_usbreg.c + +# caused by void SystemStoreFICRNS() (without void) in system_nrf5340_application.c +CFLAGS += -Wno-error=strict-prototypes + +# flash using jlink +JLINK_DEVICE = nrf5340_xxaa_app +flash: flash-jlink diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index 6d183dde6..a2bfeec89 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -1,4 +1,5 @@ -set(MCU_VARIANT nrf5340_application) +#set(MCU_VARIANT nrf5340_application) +set(MCU_VARIANT nrf5340) function(update_board TARGET) target_sources(${TARGET} PRIVATE diff --git a/hw/bsp/nrf/boards/pca10095/board.mk b/hw/bsp/nrf/boards/pca10095/board.mk index 20580d619..9a973150d 100644 --- a/hw/bsp/nrf/boards/pca10095/board.mk +++ b/hw/bsp/nrf/boards/pca10095/board.mk @@ -1,4 +1,3 @@ -CPU_CORE = cortex-m33 MCU_VARIANT = nrf5340_application CFLAGS += -DNRF5340_XXAA -DNRF5340_XXAA_APPLICATION diff --git a/hw/bsp/nrf/boards/pca10100/board.cmake b/hw/bsp/nrf/boards/pca10100/board.cmake deleted file mode 100644 index a925dae80..000000000 --- a/hw/bsp/nrf/boards/pca10100/board.cmake +++ /dev/null @@ -1,4 +0,0 @@ -set(MCU_VARIANT nrf52833) - -function(update_board TARGET) -endfunction() diff --git a/hw/bsp/nrf/boards/pca10100/board.h b/hw/bsp/nrf/boards/pca10100/board.h deleted file mode 100644 index 8aca6dce9..000000000 --- a/hw/bsp/nrf/boards/pca10100/board.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Nordic nRF52833 DK - url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN 13 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN 11 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 8 -#define UART_TX_PIN 6 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/pca10100/board.mk b/hw/bsp/nrf/boards/pca10100/board.mk deleted file mode 100644 index 5fba269b7..000000000 --- a/hw/bsp/nrf/boards/pca10100/board.mk +++ /dev/null @@ -1,7 +0,0 @@ -MCU_VARIANT = nrf52833 -CFLAGS += -DNRF52833_XXAA - -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 298ca2302..6edeacd87 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -45,7 +45,9 @@ #include "nrfx.h" #include "hal/nrf_gpio.h" #include "nrfx_gpiote.h" +#if !defined(NRF54H20_XXAA) #include "nrfx_power.h" +#endif #include "nrfx_uarte.h" #include "nrfx_spim.h" @@ -58,21 +60,26 @@ #pragma GCC diagnostic pop #endif - -// There is API changes between nrfx v2 and v3 -#if 85301 >= (10000*MDK_MAJOR_VERSION + 100*MDK_MINOR_VERSION + MDK_MICRO_VERSION) - // note MDK 8.53.1 is also used by nrfx v3.0.0, just skip this version and use later 3.x - #define NRFX_VER 2 -#else - #define NRFX_VER 3 +// example only supports nrfx v3 for code simplicity +#if !(defined(NRFX_CONFIG_API_VER_MAJOR) && NRFX_CONFIG_API_VER_MAJOR >= 3) && \ + !(85301 >= (10000*MDK_MAJOR_VERSION + 100*MDK_MINOR_VERSION + MDK_MICRO_VERSION)) + #error "Example requires nrfx v3.0.0 or later" #endif //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ +#if defined(NRF54H20_XXAA) +#define USBD_IRQn USBHS_IRQn +void USBHS_IRQHandler(void) { + tusb_int_handler(0, true); +} + +#else void USBD_IRQHandler(void) { tud_int_handler(0); } +#endif /*------------------------------------------------------------------*/ /* MACRO TYPEDEF CONSTANT ENUM @@ -96,39 +103,39 @@ enum { #define OUTPUTRDY_Msk POWER_USBREGSTATUS_OUTPUTRDY_Msk #endif -static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0); +static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(CFG_NRFX_UARTE_INSTANCE_ID); // tinyusb function that handles power event (detected, ready, removed) // We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. extern void tusb_hal_nrf_power_event(uint32_t event); +#if !defined(NRF54H20_XXAA) // nrf power callback, could be unused if SD is enabled or usb is disabled (board_test example) TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) { tusb_hal_nrf_power_event((uint32_t) event); } +#endif //------------- Host using MAX2341E -------------// #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 static void max3421_init(void); static nrfx_spim_t _spi = NRFX_SPIM_INSTANCE(1); - -#if NRFX_VER > 2 static nrfx_gpiote_t _gpiote = NRFX_GPIOTE_INSTANCE(0); #endif -#endif - //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ void board_init(void) { +#if !defined(NRF54H20_XXAA) // stop LF clock just in case we jump from application without reset NRF_CLOCK->TASKS_LFCLKSTOP = 1UL; // Use Internal OSC to compatible with all boards NRF_CLOCK->LFCLKSRC = LFCLK_SRC_RC; NRF_CLOCK->TASKS_LFCLKSTART = 1UL; +#endif // LED nrf_gpio_cfg_output(LED_PIN); @@ -140,6 +147,7 @@ void board_init(void) { #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); + #elif CFG_TUSB_OS == OPT_OS_ZEPHYR #ifdef CONFIG_HAS_HW_NRF_USBREG // IRQ_CONNECT(USBREGULATOR_IRQn, DT_IRQ(DT_INST(0, nordic_nrf_clock), priority), nrfx_isr, nrfx_usbreg_irq_handler, 0); @@ -153,21 +161,6 @@ void board_init(void) { #endif // UART - #if NRFX_VER <= 2 - nrfx_uarte_config_t uart_cfg = { - .pseltxd = UART_TX_PIN, - .pselrxd = UART_RX_PIN, - .pselcts = NRF_UARTE_PSEL_DISCONNECTED, - .pselrts = NRF_UARTE_PSEL_DISCONNECTED, - .p_context = NULL, - .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE - .interrupt_priority = 7, - .hal_cfg = { - .hwfc = NRF_UARTE_HWFC_DISABLED, - .parity = NRF_UARTE_PARITY_EXCLUDED, - } - }; - #else nrfx_uarte_config_t uart_cfg = { .txd_pin = UART_TX_PIN, .rxd_pin = UART_RX_PIN, @@ -181,7 +174,6 @@ void board_init(void) { .parity = NRF_UARTE_PARITY_EXCLUDED, } }; - #endif nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); @@ -191,6 +183,7 @@ void board_init(void) { // 2 is highest for application NVIC_SetPriority(USBD_IRQn, 2); +#if !defined(NRF54H20_XXAA) // USB power may already be ready at this time -> no event generated // We need to invoke the handler based on the status initially uint32_t usb_reg; @@ -234,6 +227,7 @@ void board_init(void) { tusb_hal_nrf_power_event(USB_EVT_READY); } #endif +#endif #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 max3421_init(); @@ -255,7 +249,9 @@ uint32_t board_button_read(void) { size_t board_get_unique_id(uint8_t id[], size_t max_len) { (void) max_len; -#ifdef NRF5340_XXAA +#if defined(NRF54H20_XXAA) + uintptr_t did_addr = (uintptr_t) NRF_FICR->BLE.ADDR; +#elif defined(NRF5340_XXAA) uintptr_t did_addr = (uintptr_t) NRF_FICR->INFO.DEVICEID; #else uintptr_t did_addr = (uintptr_t) NRF_FICR->DEVICEID; @@ -277,11 +273,7 @@ int board_uart_read(uint8_t* buf, int len) { } int board_uart_write(void const* buf, int len) { - nrfx_err_t err = nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len - #if NRFX_VER > 2 - ,0 - #endif - ); + nrfx_err_t err = nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len ,0); return (NRFX_SUCCESS == err) ? len : 0; } @@ -352,18 +344,16 @@ void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) { // API: SPI transfer with MAX3421E, must be implemented by application //--------------------------------------------------------------------+ #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 - -#if NRFX_VER <= 2 -void max3421_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action ) { - if (action != NRF_GPIOTE_POLARITY_HITOLO) return; -#else void max3421_int_handler(nrfx_gpiote_pin_t pin, nrfx_gpiote_trigger_t action, void* p_context) { (void) p_context; - if (action != NRFX_GPIOTE_TRIGGER_HITOLO) return; -#endif + if (action != NRFX_GPIOTE_TRIGGER_HITOLO) { + return; + } + if (pin != MAX3421_INTR_PIN) { + return; + } - if (pin != MAX3421_INTR_PIN) return; - tuh_int_handler(1, true); + tusb_int_handler(1, true); } static void max3421_init(void) { @@ -378,13 +368,8 @@ static void max3421_init(void) { .sck_pin = MAX3421_SCK_PIN, .mosi_pin = MAX3421_MOSI_PIN, .miso_pin = MAX3421_MISO_PIN, - #if NRFX_VER <= 2 - .ss_pin = NRFX_SPIM_PIN_NOT_USED, - .frequency = NRF_SPIM_FREQ_4M, - #else .ss_pin = NRF_SPIM_PIN_NOT_CONNECTED, .frequency = 4000000u, - #endif .ss_active_high = false, .irq_priority = 3, .orc = 0xFF, @@ -398,14 +383,6 @@ static void max3421_init(void) { TU_ASSERT(NRFX_SUCCESS == nrfx_spim_init(&_spi, &cfg, NULL, NULL), ); // max3421e interrupt pin - #if NRFX_VER <= 2 - nrfx_gpiote_init(1); - nrfx_gpiote_in_config_t in_config = NRFX_GPIOTE_CONFIG_IN_SENSE_HITOLO(true); - in_config.pull = NRF_GPIO_PIN_PULLUP; - NVIC_SetPriority(GPIOTE_IRQn, 2); - nrfx_gpiote_in_init(MAX3421_INTR_PIN, &in_config, max3421_int_handler); - nrfx_gpiote_trigger_enable(MAX3421_INTR_PIN, true); - #else nrf_gpio_pin_pull_t intr_pull = NRF_GPIO_PIN_PULLUP; nrfx_gpiote_trigger_config_t intr_trigger = { .trigger = NRFX_GPIOTE_TRIGGER_HITOLO, @@ -426,7 +403,6 @@ static void max3421_init(void) { nrfx_gpiote_input_configure(&_gpiote, MAX3421_INTR_PIN, &intr_config); nrfx_gpiote_trigger_enable(&_gpiote, MAX3421_INTR_PIN, true); - #endif } // API to enable/disable MAX3421 INTR pin interrupt diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 7d0a9f6de..67aa19db2 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -10,17 +10,21 @@ if (NOT board_cmake_included) endif () # toolchain set up -if (MCU_VARIANT STREQUAL "nrf5340_application") +if (MCU_VARIANT STREQUAL nrf5340 OR MCU_VARIANT STREQUAL nrf54h20) set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") - set(JLINK_DEVICE nrf5340_xxaa_app) + set(JLINK_DEVICE ${MCU_VARIANT}_xxaa_app) else () set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(JLINK_DEVICE ${MCU_VARIANT}_xxaa) endif () -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +if (MCU_VARIANT STREQUAL "nrf54h20") + set(FAMILY_MCUS NRF54 CACHE INTERNAL "") +else () + set(FAMILY_MCUS NRF5X CACHE INTERNAL "") +endif () -set(FAMILY_MCUS NRF5X CACHE INTERNAL "") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) #------------------------------------ # BOARD_TARGET @@ -31,36 +35,46 @@ function(add_board_target BOARD_TARGET) return() endif () - if (MCU_VARIANT STREQUAL "nrf5340_application") - set(MCU_VARIANT_XXAA "nrf5340_xxaa_application") - else () - set(MCU_VARIANT_XXAA "${MCU_VARIANT}_xxaa") - endif () - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_XXAA}.ld) - endif () - - if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) - set(STARTUP_FILE_GNU ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - endif () - add_library(${BOARD_TARGET} STATIC ${NRFX_PATH}/helpers/nrfx_flag32_allocator.c ${NRFX_PATH}/drivers/src/nrfx_gpiote.c ${NRFX_PATH}/drivers/src/nrfx_power.c ${NRFX_PATH}/drivers/src/nrfx_spim.c ${NRFX_PATH}/drivers/src/nrfx_uarte.c - ${NRFX_PATH}/mdk/system_${MCU_VARIANT}.c ${NRFX_PATH}/soc/nrfx_atomic.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - string(TOUPPER "${MCU_VARIANT_XXAA}" MCU_VARIANT_XXAA_UPPER) + + if (MCU_VARIANT STREQUAL nrf54h20) + set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa_application.ld) + target_sources(${BOARD_TARGET} PUBLIC + ${NRFX_PATH}/mdk/system_nrf54h.c + ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}_application.S + ) + elseif (MCU_VARIANT STREQUAL nrf5340) + set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa_application.ld) + target_sources(${BOARD_TARGET} PUBLIC + ${NRFX_PATH}/mdk/system_${MCU_VARIANT}_application.c + ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}_application.S + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC NRF5340_XXAA_APPLICATION) + else() + set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) + target_sources(${BOARD_TARGET} PUBLIC + ${NRFX_PATH}/mdk/system_${MCU_VARIANT}.c + ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}.S + ) + endif () + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${LD_FILE_GNU_DEFAULT}) + endif () + + string(TOUPPER ${MCU_VARIANT} MCU_VARIANT_UPPER) target_compile_definitions(${BOARD_TARGET} PUBLIC __STARTUP_CLEAR_BSS CONFIG_GPIO_AS_PINRESET - ${MCU_VARIANT_XXAA_UPPER} + ${MCU_VARIANT_UPPER}_XXAA + NRF_APPLICATION ) if (TRACE_ETM STREQUAL "1") @@ -137,13 +151,16 @@ function(family_configure_example TARGET RTOS) endif () # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_NRF5X) + family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) target_sources(${TARGET} PRIVATE ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) # Flashing -# family_add_bin_hex(${TARGET}) + # family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) -# family_flash_adafruit_nrfutil(${TARGET}) + # family_flash_adafruit_nrfutil(${TARGET}) endfunction() diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index a8acb1624..f3a6e2cc1 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -5,7 +5,15 @@ NRFX_PATH = hw/mcu/nordic/nrfx include $(TOP)/$(BOARD_PATH)/board.mk # nRF52 is cortex-m4, nRF53 is cortex-m33 -CPU_CORE ?= cortex-m4 +ifeq (${MCU_VARIANT},nrf5340_application) + CPU_CORE = cortex-m33 +else +ifeq (${MCU_VARIANT},nrf54h20_application) + CPU_CORE = cortex-m33 +else + CPU_CORE = cortex-m4 +endif +endif CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ diff --git a/hw/bsp/nrf/linker/nrf52833_xxaa.ld b/hw/bsp/nrf/linker/nrf52833_xxaa.ld index ae4d0e5b3..f4c46a3f1 100644 --- a/hw/bsp/nrf/linker/nrf52833_xxaa.ld +++ b/hw/bsp/nrf/linker/nrf52833_xxaa.ld @@ -12,9 +12,3 @@ MEMORY INCLUDE "nrf_common.ld" - -/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ -__tbss_start__ = __tbss_start; -__tbss_end__ = __tbss_end; -__sbss_start__ = __sbss_start; -__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/linker/nrf52840_s140_v6.ld b/hw/bsp/nrf/linker/nrf52840_s140_v6.ld index 037a14196..1a2292269 100644 --- a/hw/bsp/nrf/linker/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/linker/nrf52840_s140_v6.ld @@ -36,9 +36,3 @@ SECTIONS } INSERT AFTER .data; INCLUDE "nrf_common.ld" - -/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ -__tbss_start__ = __tbss_start; -__tbss_end__ = __tbss_end; -__sbss_start__ = __sbss_start; -__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/linker/nrf52840_xxaa.ld b/hw/bsp/nrf/linker/nrf52840_xxaa.ld index 2d20ba7ac..fcfe08a60 100644 --- a/hw/bsp/nrf/linker/nrf52840_xxaa.ld +++ b/hw/bsp/nrf/linker/nrf52840_xxaa.ld @@ -12,9 +12,3 @@ MEMORY } INCLUDE "nrf_common.ld" - -/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ -__tbss_start__ = __tbss_start; -__tbss_end__ = __tbss_end; -__sbss_start__ = __sbss_start; -__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld b/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld index 31762d0b2..7fd682a40 100644 --- a/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld +++ b/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld @@ -13,9 +13,3 @@ MEMORY INCLUDE "nrf_common.ld" - -/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ -__tbss_start__ = __tbss_start; -__tbss_end__ = __tbss_end; -__sbss_start__ = __sbss_start; -__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/linker/nrf54h20_xxaa_application.ld b/hw/bsp/nrf/linker/nrf54h20_xxaa_application.ld new file mode 100644 index 000000000..0c8d7127a --- /dev/null +++ b/hw/bsp/nrf/linker/nrf54h20_xxaa_application.ld @@ -0,0 +1,21 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +/*GROUP(-lgcc -lc) not compatible with clang*/ + +MEMORY +{ + FLASH (rx) : ORIGIN = 0xE0A0000, LENGTH = 0x40000 /* Inside global MRAM0 */ + FLASH1 (rx) : ORIGIN = 0x2F840000, LENGTH = 0x4000 /* OTP0 */ + EXTFLASH (rx) : ORIGIN = 0x70000000, LENGTH = 0x20000000 + RAM (rwx) : ORIGIN = 0x22000000, LENGTH = 0x8000 + RAM1 (rwx) : ORIGIN = 0x2F000000, LENGTH = 0x80000 /* RAM00 */ + RAM2 (rwx) : ORIGIN = 0x2F080000, LENGTH = 0x60000 /* RAM01 */ + RAM3 (rwx) : ORIGIN = 0x2F880000, LENGTH = 0x10000 /* RAM20 */ + RAM4 (rwx) : ORIGIN = 0x2F890000, LENGTH = 0x8000 /* RAM21 */ + RAM5 (rwx) : ORIGIN = 0x2FC00000, LENGTH = 0x4000 /* RAM30 (low-speed) */ + RAM6 (rwx) : ORIGIN = 0x2FC04000, LENGTH = 0x4000 /* RAM31 (low-speed) */ +} + + +INCLUDE "nrf_common.ld" diff --git a/hw/bsp/nrf/nrfx_config/nrfx_config.h b/hw/bsp/nrf/nrfx_config/nrfx_config.h index fbec4192b..88431e42c 100644 --- a/hw/bsp/nrf/nrfx_config/nrfx_config.h +++ b/hw/bsp/nrf/nrfx_config/nrfx_config.h @@ -1,46 +1,111 @@ +/* + * Copyright (c) 2019 - 2025, Nordic Semiconductor ASA + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + #ifndef NRFX_CONFIG_H__ #define NRFX_CONFIG_H__ -#define NRFX_POWER_ENABLED 1 -#define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 - -#define NRFX_CLOCK_ENABLED 0 -#define NRFX_GPIOTE_ENABLED 1 -#define NRFX_GPIOTE0_ENABLED 1 - -#define NRFX_UARTE_ENABLED 1 -#define NRFX_UARTE0_ENABLED 1 - -#define NRFX_SPIM_ENABLED 1 -#define NRFX_SPIM1_ENABLED 1 // use SPI1 since nrf5340 share uart with spi - -#define NRFX_PRS_ENABLED 0 -#define NRFX_USBREG_ENABLED 1 +#include "nrfx_config_common.h" #if defined(NRF51) -#include + #include #elif defined(NRF52805_XXAA) -#include + #include #elif defined(NRF52810_XXAA) -#include + #include #elif defined(NRF52811_XXAA) -#include + #include #elif defined(NRF52820_XXAA) -#include + #include #elif defined(NRF52832_XXAA) || defined (NRF52832_XXAB) -#include + #include #elif defined(NRF52833_XXAA) -#include + #include #elif defined(NRF52840_XXAA) -#include + #include #elif defined(NRF5340_XXAA_APPLICATION) -#include + #include #elif defined(NRF5340_XXAA_NETWORK) #include +#elif defined(NRF54H20_XXAA) && defined(NRF_APPLICATION) + #include +#elif defined(NRF54H20_XXAA) && defined(NRF_RADIOCORE) + #include +#elif defined(NRF54H20_XXAA) && defined(NRF_PPR) + #include +#elif defined(NRF54H20_XXAA) && defined(NRF_FLPR) + #include +#elif defined(NRF54L05_XXAA) && defined(NRF_APPLICATION) + #include +#elif defined(NRF54L05_XXAA) && defined(NRF_FLPR) + #include +#elif defined(NRF54L10_XXAA) && defined(NRF_APPLICATION) + #include +#elif defined(NRF54L10_XXAA) && defined(NRF_FLPR) + #include +#elif defined(NRF54L15_XXAA) && defined(NRF_APPLICATION) + #include +#elif defined(NRF54L15_XXAA) && defined(NRF_FLPR) + #include +#elif defined(NRF54LM20A_ENGA_XXAA) && defined(NRF_APPLICATION) + #include +#elif defined(NRF54LM20A_ENGA_XXAA) && defined(NRF_FLPR) + #include +#elif defined(NRF54LS05B_ENGA_XXAA) && defined(NRF_APPLICATION) + #include +#elif defined(NRF54LV10A_ENGA_XXAA) && defined(NRF_APPLICATION) + #include +#elif defined(NRF54LV10A_ENGA_XXAA) && defined(NRF_FLPR) + #include +#elif defined(NRF7120_ENGA_XXAA) && defined(NRF_APPLICATION) + #include +#elif defined(NRF7120_ENGA_XXAA) && defined(NRF_FLPR) + #include +#elif defined(NRF7120_ENGA_XXAA) && defined(NRF_LMAC) + #include +#elif defined(NRF7120_ENGA_XXAA) && defined(NRF_UMAC) + #include #elif defined(NRF9120_XXAA) || defined(NRF9160_XXAA) #include +#elif defined(NRF9230_ENGB_XXAA) && defined(NRF_APPLICATION) + #include +#elif defined(NRF9230_ENGB_XXAA) && defined(NRF_RADIOCORE) + #include +#elif defined(NRF9230_ENGB_XXAA) && defined(NRF_PPR) + #include +#elif defined(NRF9230_ENGB_XXAA) && defined(NRF_FLPR) + #include #else - #error "Unknown device." + #include "nrfx_config_ext.h" #endif #endif // NRFX_CONFIG_H__ diff --git a/hw/bsp/nrf/nrfx_config/nrfx_config_common.h b/hw/bsp/nrf/nrfx_config/nrfx_config_common.h new file mode 100644 index 000000000..1d75e5a66 --- /dev/null +++ b/hw/bsp/nrf/nrfx_config/nrfx_config_common.h @@ -0,0 +1,86 @@ +/* + * Copyright (c) 2022 - 2025, Nordic Semiconductor ASA + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef NRFX_CONFIG_COMMON_H__ +#define NRFX_CONFIG_COMMON_H__ + +#ifndef NRFX_CONFIG_H__ +#error "This file should not be included directly. Include nrfx_config.h instead." +#endif + +/** @brief Symbol specifying major version of the nrfx API to be used. */ +#ifndef NRFX_CONFIG_API_VER_MAJOR +#define NRFX_CONFIG_API_VER_MAJOR 3 +#endif + +/** @brief Symbol specifying minor version of the nrfx API to be used. */ +#ifndef NRFX_CONFIG_API_VER_MINOR +#define NRFX_CONFIG_API_VER_MINOR 12 +#endif + +/** @brief Symbol specifying micro version of the nrfx API to be used. */ +#ifndef NRFX_CONFIG_API_VER_MICRO +#define NRFX_CONFIG_API_VER_MICRO 0 +#endif + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ +#define NRFX_CLOCK_ENABLED 0 +#define NRFX_UARTE_ENABLED 1 + +#if defined(NRF54H20_XXAA) +#define NRFX_UARTE120_ENABLED 1 +#define CFG_NRFX_UARTE_INSTANCE_ID 120 + +#else + +#define NRFX_POWER_ENABLED 1 +#define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 + +#define NRFX_UARTE0_ENABLED 1 +#define CFG_NRFX_UARTE_INSTANCE_ID 0 + +#define NRFX_GPIOTE_ENABLED 1 +#define NRFX_GPIOTE0_ENABLED 1 + +#define NRFX_SPIM_ENABLED 1 +#define NRFX_SPIM1_ENABLED 1 // use SPI1 since nrf5340 share uart with spi +#endif + +#define NRFX_PRS_ENABLED 0 +#define NRFX_USBREG_ENABLED 1 + +#define NRF_STATIC_INLINE static inline + +#endif /* NRFX_CONFIG_COMMON_H__ */ diff --git a/hw/bsp/nrf/nrfx_config/nrfx_config_ext.h b/hw/bsp/nrf/nrfx_config/nrfx_config_ext.h new file mode 100644 index 000000000..e503e1399 --- /dev/null +++ b/hw/bsp/nrf/nrfx_config/nrfx_config_ext.h @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2023 - 2025, Nordic Semiconductor ASA + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef NRFX_CONFIG_EXT_H__ +#define NRFX_CONFIG_EXT_H__ + +#error "Unknown device." + +#endif // NRFX_CONFIG_EXT_H__ diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 1c11df114..1f8975e55 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -137,6 +137,12 @@ // 8 CBI + 1 ISO #define TUP_DCD_ENDPOINT_MAX 9 +#elif TU_CHECK_MCU(OPT_MCU_NRF54) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_NRF + #define TUP_DCD_ENDPOINT_MAX 16 + #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 + //--------------------------------------------------------------------+ // Microchip //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index 33219f786..0166b0261 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -51,6 +51,8 @@ #include "dwc2_xmc.h" #elif defined(TUP_USBIP_DWC2_AT32) #include "dwc2_at32.h" +#elif defined(TUP_USBIP_DWC2_NRF) + #include "dwc2_nrf.h" #else #error "Unsupported MCUs" #endif diff --git a/src/portable/synopsys/dwc2/dwc2_nrf.h b/src/portable/synopsys/dwc2/dwc2_nrf.h new file mode 100644 index 000000000..b93571f16 --- /dev/null +++ b/src/portable/synopsys/dwc2/dwc2_nrf.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef TUSB_DWC2_NRF_H +#define TUSB_DWC2_NRF_H + +#include "nrf.h" + +#define DWC2_EP_MAX 16 + +static const dwc2_controller_t _dwc2_controller[] = { + { .reg_base = NRF_USBHSCORE0_NS_BASE, .irqnum = USBHS_IRQn, .ep_count = 16, .ep_fifo_size = 12288 }, +}; + +TU_ATTR_ALWAYS_INLINE static inline void dwc2_int_set(uint8_t rhport, tusb_role_t role, bool enabled) { + (void) rhport; + (void) role; + (void) enabled; +} + +#define dwc2_dcd_int_enable(_rhport) dwc2_int_set(_rhport, TUSB_ROLE_DEVICE, true) +#define dwc2_dcd_int_disable(_rhport) dwc2_int_set(_rhport, TUSB_ROLE_DEVICE, false) + +TU_ATTR_ALWAYS_INLINE static inline void dwc2_remote_wakeup_delay(void) { +} + +// MCU specific PHY init, called BEFORE core reset +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { + (void)dwc2; + (void)hs_phy_type; +} + +// MCU specific PHY update, it is called AFTER init() and core reset +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_update(dwc2_regs_t* dwc2, uint8_t hs_phy_type) { + (void)dwc2; + (void)hs_phy_type; +} + +#endif diff --git a/src/tusb_option.h b/src/tusb_option.h index 378b5607e..dd57f6296 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -62,7 +62,8 @@ #define OPT_MCU_LPC55XX OPT_MCU_LPC55 // NRF -#define OPT_MCU_NRF5X 100 ///< Nordic nRF5x series +#define OPT_MCU_NRF5X 100 ///< Nordic nRF 52,53 series +#define OPT_MCU_NRF54 101 ///< Nordic nRF54 series // SAM #define OPT_MCU_SAMD21 200 ///< MicroChip SAMD21 diff --git a/tools/get_deps.py b/tools/get_deps.py index 36ed98a62..c243137fa 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -47,7 +47,7 @@ deps_optional = { 'b93e856211060ae825216c6a1d6aa347ec758843', 'mm32'], 'hw/mcu/nordic/nrfx': ['https://github.com/NordicSemiconductor/nrfx.git', - '7c47cc0a56ce44658e6da2458e86cd8783ccc4a2', + '11f57e578c7feea13f21c79ea0efab2630ac68c7', 'nrf'], 'hw/mcu/nuvoton': ['https://github.com/majbthrd/nuc_driver.git', '2204191ec76283371419fbcec207da02e1bc22fa', -- cgit v1.3.1 From dacbe8ee311d4a2eda06e4aca8c29529736abfd7 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 13 Oct 2025 14:48:07 +0700 Subject: update make build system rename pca10095 to nrf5340dk --- hw/bsp/nrf/boards/adafruit_clue/board.mk | 2 +- .../boards/circuitplayground_bluefruit/board.mk | 2 +- .../nrf/boards/feather_nrf52840_express/board.mk | 2 +- hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk | 2 +- hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk | 2 +- hw/bsp/nrf/boards/nrf52833dk/board.mk | 2 +- hw/bsp/nrf/boards/nrf5340dk/board.cmake | 4 + hw/bsp/nrf/boards/nrf5340dk/board.h | 65 ++++ hw/bsp/nrf/boards/nrf5340dk/board.mk | 12 + hw/bsp/nrf/boards/nrf5340dk/ozone/nrf5340.jdebug | 335 +++++++++++++++++++++ hw/bsp/nrf/boards/nrf54h20dk/board.mk | 6 +- hw/bsp/nrf/boards/pca10056/board.mk | 2 - hw/bsp/nrf/boards/pca10059/pca10059.ld | 6 - hw/bsp/nrf/boards/pca10095/board.cmake | 8 - hw/bsp/nrf/boards/pca10095/board.h | 65 ---- hw/bsp/nrf/boards/pca10095/board.mk | 16 - hw/bsp/nrf/boards/pca10095/ozone/nrf5340.jdebug | 335 --------------------- hw/bsp/nrf/family.cmake | 1 + hw/bsp/nrf/family.mk | 39 ++- 19 files changed, 453 insertions(+), 453 deletions(-) create mode 100644 hw/bsp/nrf/boards/nrf5340dk/board.cmake create mode 100644 hw/bsp/nrf/boards/nrf5340dk/board.h create mode 100644 hw/bsp/nrf/boards/nrf5340dk/board.mk create mode 100644 hw/bsp/nrf/boards/nrf5340dk/ozone/nrf5340.jdebug delete mode 100644 hw/bsp/nrf/boards/pca10095/board.cmake delete mode 100644 hw/bsp/nrf/boards/pca10095/board.h delete mode 100644 hw/bsp/nrf/boards/pca10095/board.mk delete mode 100644 hw/bsp/nrf/boards/pca10095/ozone/nrf5340.jdebug diff --git a/hw/bsp/nrf/boards/adafruit_clue/board.mk b/hw/bsp/nrf/boards/adafruit_clue/board.mk index b80807963..e6fcdd9b0 100644 --- a/hw/bsp/nrf/boards/adafruit_clue/board.mk +++ b/hw/bsp/nrf/boards/adafruit_clue/board.mk @@ -2,7 +2,7 @@ MCU_VARIANT = nrf52840 CFLAGS += -DNRF52840_XXAA # All source paths should be relative to the top level. -LD_FILE = hw/bsp/nrf/linker/nrf52840_s140_v6.ld +LD_FILE = ${FAMILY_PATH}/linker/nrf52840_s140_v6.ld $(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk index b80807963..e6fcdd9b0 100644 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.mk @@ -2,7 +2,7 @@ MCU_VARIANT = nrf52840 CFLAGS += -DNRF52840_XXAA # All source paths should be relative to the top level. -LD_FILE = hw/bsp/nrf/linker/nrf52840_s140_v6.ld +LD_FILE = ${FAMILY_PATH}/linker/nrf52840_s140_v6.ld $(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk b/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk index 488f07b82..d33b3558a 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.mk @@ -5,7 +5,7 @@ CFLAGS += -DNRF52840_XXAA MAX3421_HOST = 1 # All source paths should be relative to the top level. -LD_FILE = hw/bsp/nrf/linker/nrf52840_s140_v6.ld +LD_FILE = ${FAMILY_PATH}/linker/nrf52840_s140_v6.ld $(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk index b80807963..e6fcdd9b0 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.mk @@ -2,7 +2,7 @@ MCU_VARIANT = nrf52840 CFLAGS += -DNRF52840_XXAA # All source paths should be relative to the top level. -LD_FILE = hw/bsp/nrf/linker/nrf52840_s140_v6.ld +LD_FILE = ${FAMILY_PATH}/linker/nrf52840_s140_v6.ld $(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk index b80807963..e6fcdd9b0 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.mk @@ -2,7 +2,7 @@ MCU_VARIANT = nrf52840 CFLAGS += -DNRF52840_XXAA # All source paths should be relative to the top level. -LD_FILE = hw/bsp/nrf/linker/nrf52840_s140_v6.ld +LD_FILE = ${FAMILY_PATH}/linker/nrf52840_s140_v6.ld $(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@ diff --git a/hw/bsp/nrf/boards/nrf52833dk/board.mk b/hw/bsp/nrf/boards/nrf52833dk/board.mk index 5fba269b7..7cf00cbc1 100644 --- a/hw/bsp/nrf/boards/nrf52833dk/board.mk +++ b/hw/bsp/nrf/boards/nrf52833dk/board.mk @@ -1,7 +1,7 @@ MCU_VARIANT = nrf52833 CFLAGS += -DNRF52833_XXAA -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld +LD_FILE = ${FAMILY_PATH}/linker/nrf52833_xxaa.ld # flash using jlink flash: flash-jlink diff --git a/hw/bsp/nrf/boards/nrf5340dk/board.cmake b/hw/bsp/nrf/boards/nrf5340dk/board.cmake new file mode 100644 index 000000000..fe766dd78 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf5340dk/board.cmake @@ -0,0 +1,4 @@ +set(MCU_VARIANT nrf5340) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/nrf5340dk/board.h b/hw/bsp/nrf/boards/nrf5340dk/board.h new file mode 100644 index 000000000..1c7981049 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf5340dk/board.h @@ -0,0 +1,65 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Nordic nRF5340 DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN 28 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN 23 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 22 +#define UART_TX_PIN 20 + +// SPI for USB host shield +// Pin is correct but not working probably due to signal incompatible (1.8V 3v3) with MAC3421E !? +//#define MAX3421_SCK_PIN _PINNUM(1, 15) +//#define MAX3421_MOSI_PIN _PINNUM(1, 13) +//#define MAX3421_MISO_PIN _PINNUM(1, 14) +//#define MAX3421_CS_PIN _PINNUM(1, 12) +//#define MAX3421_INTR_PIN _PINNUM(1, 11) + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/nrf5340dk/board.mk b/hw/bsp/nrf/boards/nrf5340dk/board.mk new file mode 100644 index 000000000..972168fcd --- /dev/null +++ b/hw/bsp/nrf/boards/nrf5340dk/board.mk @@ -0,0 +1,12 @@ +MCU_VARIANT = nrf5340 +CFLAGS += -DNRF5340_XXAA -DNRF5340_XXAA_APPLICATION + +# enable max3421 host driver for this board +MAX3421_HOST = 1 + +# caused by void SystemStoreFICRNS() (without void) in system_nrf5340_application.c +CFLAGS += -Wno-error=strict-prototypes + +# flash using jlink +JLINK_DEVICE = nrf5340_xxaa_app +flash: flash-jlink diff --git a/hw/bsp/nrf/boards/nrf5340dk/ozone/nrf5340.jdebug b/hw/bsp/nrf/boards/nrf5340dk/ozone/nrf5340.jdebug new file mode 100644 index 000000000..4ad0376a4 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf5340dk/ozone/nrf5340.jdebug @@ -0,0 +1,335 @@ +/********************************************************************* +* (c) SEGGER Microcontroller GmbH * +* The Embedded Experts * +* www.segger.com * +********************************************************************** + +File : +Created : 30 Jun 2021 13:37 +Ozone Version : V3.24a +*/ + +/********************************************************************* +* +* OnProjectLoad +* +* Function description +* Project load routine. Required. +* +********************************************************************** +*/ +void OnProjectLoad (void) { + // Dialog-generated settings + Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M33F.svd"); + Project.AddSvdFile ("./nrf5340_application.svd"); + Project.SetDevice ("nRF5340_xxAA_APP"); + Project.SetHostIF ("USB", ""); + Project.SetTargetIF ("SWD"); + Project.SetTIFSpeed ("16 MHz"); + + Project.SetTraceSource ("Trace Pins"); + Project.SetTracePortWidth (4); + + // User settings + File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-pca10095/cdc_msc.elf"); +} + +/********************************************************************* +* +* OnStartupComplete +* +* Function description +* Called when program execution has reached/passed +* the startup completion point. Optional. +* +********************************************************************** +*/ +//void OnStartupComplete (void) { +//} + +/********************************************************************* +* +* TargetReset +* +* Function description +* Replaces the default target device reset routine. Optional. +* +* Notes +* This example demonstrates the usage when +* debugging an application in RAM on a Cortex-M target device. +* +********************************************************************** +*/ +//void TargetReset (void) { +// +// unsigned int SP; +// unsigned int PC; +// unsigned int VectorTableAddr; +// +// VectorTableAddr = Elf.GetBaseAddr(); +// // +// // Set up initial stack pointer +// // +// if (VectorTableAddr != 0xFFFFFFFF) { +// SP = Target.ReadU32(VectorTableAddr); +// Target.SetReg("SP", SP); +// } +// // +// // Set up entry point PC +// // +// PC = Elf.GetEntryPointPC(); +// +// if (PC != 0xFFFFFFFF) { +// Target.SetReg("PC", PC); +// } else if (VectorTableAddr != 0xFFFFFFFF) { +// PC = Target.ReadU32(VectorTableAddr + 4); +// Target.SetReg("PC", PC); +// } else { +// Util.Error("Project file error: failed to set entry point PC", 1); +// } +//} + +/********************************************************************* +* +* BeforeTargetReset +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetReset (void) { +//} + +/********************************************************************* +* +* AfterTargetReset +* +* Function description +* Event handler routine. Optional. +* The default implementation initializes SP and PC to reset values. +** +********************************************************************** +*/ +void AfterTargetReset (void) { + _SetupTarget(); +} + +/********************************************************************* +* +* DebugStart +* +* Function description +* Replaces the default debug session startup routine. Optional. +* +********************************************************************** +*/ +//void DebugStart (void) { +//} + +/********************************************************************* +* +* TargetConnect +* +* Function description +* Replaces the default target IF connection routine. Optional. +* +********************************************************************** +*/ +//void TargetConnect (void) { +//} + +/********************************************************************* +* +* BeforeTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +void BeforeTargetConnect (void) { +} + +/********************************************************************* +* +* AfterTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetConnect (void) { +//} + +/********************************************************************* +* +* TargetDownload +* +* Function description +* Replaces the default program download routine. Optional. +* +********************************************************************** +*/ +//void TargetDownload (void) { +//} + +/********************************************************************* +* +* BeforeTargetDownload +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDownload (void) { +//} + +/********************************************************************* +* +* AfterTargetDownload +* +* Function description +* Event handler routine. Optional. +* The default implementation initializes SP and PC to reset values. +* +********************************************************************** +*/ +void AfterTargetDownload (void) { + _SetupTarget(); +} + +/********************************************************************* +* +* BeforeTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetHalt +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetHalt (void) { +//} + +/********************************************************************* +* +* BeforeTargetResume +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetResume (void) { +//} + +/********************************************************************* +* +* OnSnapshotLoad +* +* Function description +* Called upon loading a snapshot. Optional. +* +* Additional information +* This function is used to restore the target state in cases +* where values cannot simply be written to the target. +* Typical use: GPIO clock needs to be enabled, before +* GPIO is configured. +* +********************************************************************** +*/ +//void OnSnapshotLoad (void) { +//} + +/********************************************************************* +* +* OnSnapshotSave +* +* Function description +* Called upon saving a snapshot. Optional. +* +* Additional information +* This function is usually used to save values of the target +* state which can either not be trivially read, +* or need to be restored in a specific way or order. +* Typically use: Memory Mapped Registers, +* such as PLL and GPIO configuration. +* +********************************************************************** +*/ +//void OnSnapshotSave (void) { +//} + +/********************************************************************* +* +* OnError +* +* Function description +* Called when an error occurred. Optional. +* +********************************************************************** +*/ +//void OnError (void) { +//} + +/********************************************************************* +* +* _SetupTarget +* +* Function description +* Setup the target. +* Called by AfterTargetReset() and AfterTargetDownload(). +* +* Auto-generated function. May be overridden by Ozone. +* +********************************************************************** +*/ +void _SetupTarget(void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + VectorTableAddr = Elf.GetBaseAddr(); + // + // Set up initial stack pointer + // + SP = Target.ReadU32(VectorTableAddr); + if (SP != 0xFFFFFFFF) { + Target.SetReg("SP", SP); + } + // + // Set up entry point PC + // + PC = Elf.GetEntryPointPC(); + if (PC != 0xFFFFFFFF) { + Target.SetReg("PC", PC); + } else { + Util.Error("Project script error: failed to set up entry point PC", 1); + } +} diff --git a/hw/bsp/nrf/boards/nrf54h20dk/board.mk b/hw/bsp/nrf/boards/nrf54h20dk/board.mk index 157ba3c36..c49b605e8 100644 --- a/hw/bsp/nrf/boards/nrf54h20dk/board.mk +++ b/hw/bsp/nrf/boards/nrf54h20dk/board.mk @@ -1,13 +1,9 @@ -MCU_VARIANT = nrf54h20_application +MCU_VARIANT = nrf54h20 CFLAGS += -DNRF54H20_XXAA # enable max3421 host driver for this board MAX3421_HOST = 1 -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf5340_xxaa_application.ld - -SRC_C += hw/mcu/nordic/nrfx/drivers/src/nrfx_usbreg.c - # caused by void SystemStoreFICRNS() (without void) in system_nrf5340_application.c CFLAGS += -Wno-error=strict-prototypes diff --git a/hw/bsp/nrf/boards/pca10056/board.mk b/hw/bsp/nrf/boards/pca10056/board.mk index be2ed3314..d8bbd41f8 100644 --- a/hw/bsp/nrf/boards/pca10056/board.mk +++ b/hw/bsp/nrf/boards/pca10056/board.mk @@ -1,7 +1,5 @@ MCU_VARIANT = nrf52840 CFLAGS += -DNRF52840_XXAA -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld - # flash using jlink flash: flash-jlink diff --git a/hw/bsp/nrf/boards/pca10059/pca10059.ld b/hw/bsp/nrf/boards/pca10059/pca10059.ld index adc80f3c4..32cc6eada 100644 --- a/hw/bsp/nrf/boards/pca10059/pca10059.ld +++ b/hw/bsp/nrf/boards/pca10059/pca10059.ld @@ -11,9 +11,3 @@ MEMORY INCLUDE "nrf_common.ld" - -/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ -__tbss_start__ = __tbss_start; -__tbss_end__ = __tbss_end; -__sbss_start__ = __sbss_start; -__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake deleted file mode 100644 index a2bfeec89..000000000 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ /dev/null @@ -1,8 +0,0 @@ -#set(MCU_VARIANT nrf5340_application) -set(MCU_VARIANT nrf5340) - -function(update_board TARGET) - target_sources(${TARGET} PRIVATE - ${NRFX_PATH}/drivers/src/nrfx_usbreg.c - ) -endfunction() diff --git a/hw/bsp/nrf/boards/pca10095/board.h b/hw/bsp/nrf/boards/pca10095/board.h deleted file mode 100644 index 1c7981049..000000000 --- a/hw/bsp/nrf/boards/pca10095/board.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Nordic nRF5340 DK - url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN 28 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN 23 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 22 -#define UART_TX_PIN 20 - -// SPI for USB host shield -// Pin is correct but not working probably due to signal incompatible (1.8V 3v3) with MAC3421E !? -//#define MAX3421_SCK_PIN _PINNUM(1, 15) -//#define MAX3421_MOSI_PIN _PINNUM(1, 13) -//#define MAX3421_MISO_PIN _PINNUM(1, 14) -//#define MAX3421_CS_PIN _PINNUM(1, 12) -//#define MAX3421_INTR_PIN _PINNUM(1, 11) - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/pca10095/board.mk b/hw/bsp/nrf/boards/pca10095/board.mk deleted file mode 100644 index 9a973150d..000000000 --- a/hw/bsp/nrf/boards/pca10095/board.mk +++ /dev/null @@ -1,16 +0,0 @@ -MCU_VARIANT = nrf5340_application -CFLAGS += -DNRF5340_XXAA -DNRF5340_XXAA_APPLICATION - -# enable max3421 host driver for this board -MAX3421_HOST = 1 - -LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf5340_xxaa_application.ld - -SRC_C += hw/mcu/nordic/nrfx/drivers/src/nrfx_usbreg.c - -# caused by void SystemStoreFICRNS() (without void) in system_nrf5340_application.c -CFLAGS += -Wno-error=strict-prototypes - -# flash using jlink -JLINK_DEVICE = nrf5340_xxaa_app -flash: flash-jlink diff --git a/hw/bsp/nrf/boards/pca10095/ozone/nrf5340.jdebug b/hw/bsp/nrf/boards/pca10095/ozone/nrf5340.jdebug deleted file mode 100644 index 4ad0376a4..000000000 --- a/hw/bsp/nrf/boards/pca10095/ozone/nrf5340.jdebug +++ /dev/null @@ -1,335 +0,0 @@ -/********************************************************************* -* (c) SEGGER Microcontroller GmbH * -* The Embedded Experts * -* www.segger.com * -********************************************************************** - -File : -Created : 30 Jun 2021 13:37 -Ozone Version : V3.24a -*/ - -/********************************************************************* -* -* OnProjectLoad -* -* Function description -* Project load routine. Required. -* -********************************************************************** -*/ -void OnProjectLoad (void) { - // Dialog-generated settings - Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M33F.svd"); - Project.AddSvdFile ("./nrf5340_application.svd"); - Project.SetDevice ("nRF5340_xxAA_APP"); - Project.SetHostIF ("USB", ""); - Project.SetTargetIF ("SWD"); - Project.SetTIFSpeed ("16 MHz"); - - Project.SetTraceSource ("Trace Pins"); - Project.SetTracePortWidth (4); - - // User settings - File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-pca10095/cdc_msc.elf"); -} - -/********************************************************************* -* -* OnStartupComplete -* -* Function description -* Called when program execution has reached/passed -* the startup completion point. Optional. -* -********************************************************************** -*/ -//void OnStartupComplete (void) { -//} - -/********************************************************************* -* -* TargetReset -* -* Function description -* Replaces the default target device reset routine. Optional. -* -* Notes -* This example demonstrates the usage when -* debugging an application in RAM on a Cortex-M target device. -* -********************************************************************** -*/ -//void TargetReset (void) { -// -// unsigned int SP; -// unsigned int PC; -// unsigned int VectorTableAddr; -// -// VectorTableAddr = Elf.GetBaseAddr(); -// // -// // Set up initial stack pointer -// // -// if (VectorTableAddr != 0xFFFFFFFF) { -// SP = Target.ReadU32(VectorTableAddr); -// Target.SetReg("SP", SP); -// } -// // -// // Set up entry point PC -// // -// PC = Elf.GetEntryPointPC(); -// -// if (PC != 0xFFFFFFFF) { -// Target.SetReg("PC", PC); -// } else if (VectorTableAddr != 0xFFFFFFFF) { -// PC = Target.ReadU32(VectorTableAddr + 4); -// Target.SetReg("PC", PC); -// } else { -// Util.Error("Project file error: failed to set entry point PC", 1); -// } -//} - -/********************************************************************* -* -* BeforeTargetReset -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetReset (void) { -//} - -/********************************************************************* -* -* AfterTargetReset -* -* Function description -* Event handler routine. Optional. -* The default implementation initializes SP and PC to reset values. -** -********************************************************************** -*/ -void AfterTargetReset (void) { - _SetupTarget(); -} - -/********************************************************************* -* -* DebugStart -* -* Function description -* Replaces the default debug session startup routine. Optional. -* -********************************************************************** -*/ -//void DebugStart (void) { -//} - -/********************************************************************* -* -* TargetConnect -* -* Function description -* Replaces the default target IF connection routine. Optional. -* -********************************************************************** -*/ -//void TargetConnect (void) { -//} - -/********************************************************************* -* -* BeforeTargetConnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -void BeforeTargetConnect (void) { -} - -/********************************************************************* -* -* AfterTargetConnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void AfterTargetConnect (void) { -//} - -/********************************************************************* -* -* TargetDownload -* -* Function description -* Replaces the default program download routine. Optional. -* -********************************************************************** -*/ -//void TargetDownload (void) { -//} - -/********************************************************************* -* -* BeforeTargetDownload -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetDownload (void) { -//} - -/********************************************************************* -* -* AfterTargetDownload -* -* Function description -* Event handler routine. Optional. -* The default implementation initializes SP and PC to reset values. -* -********************************************************************** -*/ -void AfterTargetDownload (void) { - _SetupTarget(); -} - -/********************************************************************* -* -* BeforeTargetDisconnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetDisconnect (void) { -//} - -/********************************************************************* -* -* AfterTargetDisconnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void AfterTargetDisconnect (void) { -//} - -/********************************************************************* -* -* AfterTargetHalt -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void AfterTargetHalt (void) { -//} - -/********************************************************************* -* -* BeforeTargetResume -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetResume (void) { -//} - -/********************************************************************* -* -* OnSnapshotLoad -* -* Function description -* Called upon loading a snapshot. Optional. -* -* Additional information -* This function is used to restore the target state in cases -* where values cannot simply be written to the target. -* Typical use: GPIO clock needs to be enabled, before -* GPIO is configured. -* -********************************************************************** -*/ -//void OnSnapshotLoad (void) { -//} - -/********************************************************************* -* -* OnSnapshotSave -* -* Function description -* Called upon saving a snapshot. Optional. -* -* Additional information -* This function is usually used to save values of the target -* state which can either not be trivially read, -* or need to be restored in a specific way or order. -* Typically use: Memory Mapped Registers, -* such as PLL and GPIO configuration. -* -********************************************************************** -*/ -//void OnSnapshotSave (void) { -//} - -/********************************************************************* -* -* OnError -* -* Function description -* Called when an error occurred. Optional. -* -********************************************************************** -*/ -//void OnError (void) { -//} - -/********************************************************************* -* -* _SetupTarget -* -* Function description -* Setup the target. -* Called by AfterTargetReset() and AfterTargetDownload(). -* -* Auto-generated function. May be overridden by Ozone. -* -********************************************************************** -*/ -void _SetupTarget(void) { - unsigned int SP; - unsigned int PC; - unsigned int VectorTableAddr; - - VectorTableAddr = Elf.GetBaseAddr(); - // - // Set up initial stack pointer - // - SP = Target.ReadU32(VectorTableAddr); - if (SP != 0xFFFFFFFF) { - Target.SetReg("SP", SP); - } - // - // Set up entry point PC - // - PC = Elf.GetEntryPointPC(); - if (PC != 0xFFFFFFFF) { - Target.SetReg("PC", PC); - } else { - Util.Error("Project script error: failed to set up entry point PC", 1); - } -} diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 67aa19db2..8cebcbedd 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -55,6 +55,7 @@ function(add_board_target BOARD_TARGET) target_sources(${BOARD_TARGET} PUBLIC ${NRFX_PATH}/mdk/system_${MCU_VARIANT}_application.c ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}_application.S + ${NRFX_PATH}/drivers/src/nrfx_usbreg.c ) target_compile_definitions(${BOARD_TARGET} PUBLIC NRF5340_XXAA_APPLICATION) else() diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index f3a6e2cc1..2cead99db 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -4,19 +4,37 @@ NRFX_PATH = hw/mcu/nordic/nrfx include $(TOP)/$(BOARD_PATH)/board.mk -# nRF52 is cortex-m4, nRF53 is cortex-m33 -ifeq (${MCU_VARIANT},nrf5340_application) +ifeq (${MCU_VARIANT},nrf54h20) CPU_CORE = cortex-m33 + CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_NRF54 + LD_FILE_DEFAULT = ${FAMILY_PATH}/linker/${MCU_VARIANT}_xxaa_application.ld + SRC_C += ${NRFX_PATH}/mdk/system_nrf54h.c + SRC_S += ${NRFX_PATH}/mdk/gcc_startup_$(MCU_VARIANT)_application.S + JLINK_DEVICE ?= $(MCU_VARIANT)_xxaa_app + else -ifeq (${MCU_VARIANT},nrf54h20_application) +ifeq (${MCU_VARIANT},nrf5340) CPU_CORE = cortex-m33 + CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_NRF5X + LD_FILE_DEFAULT = ${FAMILY_PATH}/linker/${MCU_VARIANT}_xxaa_application.ld + SRC_C += ${NRFX_PATH}/mdk/system_$(MCU_VARIANT)_application.c \ + ${NRFX_PATH}/drivers/src/nrfx_usbreg.c + SRC_S += ${NRFX_PATH}/mdk/gcc_startup_$(MCU_VARIANT)_application.S + JLINK_DEVICE ?= $(MCU_VARIANT)_xxaa_app + else + CPU_CORE = cortex-m4 + CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_NRF5X + LD_FILE_DEFAULT = ${FAMILY_PATH}/linker/${MCU_VARIANT}_xxaa.ld + SRC_C += ${NRFX_PATH}/mdk/system_$(MCU_VARIANT).c + SRC_S += ${NRFX_PATH}/mdk/gcc_startup_$(MCU_VARIANT).S + JLINK_DEVICE ?= $(MCU_VARIANT)_xxaa endif endif CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ + -DNRF_APPLICATION \ -DCONFIG_GPIO_AS_PINRESET \ -D__STARTUP_CLEAR_BSS @@ -41,14 +59,20 @@ LDFLAGS_GCC += \ LDFLAGS_CLANG += \ -L$(TOP)/${NRFX_PATH}/mdk \ +ifndef LD_FILE +LD_FILE = ${LD_FILE_DEFAULT} +endif + SRC_C += \ src/portable/nordic/nrf5x/dcd_nrf5x.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ ${NRFX_PATH}/helpers/nrfx_flag32_allocator.c \ ${NRFX_PATH}/drivers/src/nrfx_gpiote.c \ ${NRFX_PATH}/drivers/src/nrfx_power.c \ ${NRFX_PATH}/drivers/src/nrfx_spim.c \ ${NRFX_PATH}/drivers/src/nrfx_uarte.c \ - ${NRFX_PATH}/mdk/system_$(MCU_VARIANT).c \ ${NRFX_PATH}/soc/nrfx_atomic.c INC += \ @@ -61,9 +85,4 @@ INC += \ $(TOP)/${NRFX_PATH}/drivers/include \ $(TOP)/${NRFX_PATH}/drivers/src \ -SRC_S += ${NRFX_PATH}/mdk/gcc_startup_$(MCU_VARIANT).S - ASFLAGS += -D__HEAP_SIZE=0 - -# For flash-jlink target -JLINK_DEVICE ?= $(MCU_VARIANT)_xxaa -- cgit v1.3.1 From 84f0cda013c83e8fa61c9d85f061f5f88cf30b9d Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 13 Oct 2025 14:53:28 +0700 Subject: rename pca10056 to nrf52840dk, pca10059 to nrf52840dongle --- docs/reference/boards.rst | 11 +- docs/reference/dependencies.rst | 2 +- hw/bsp/nrf/boards/nrf52840dk/board.cmake | 10 + hw/bsp/nrf/boards/nrf52840dk/board.h | 65 ++++++ hw/bsp/nrf/boards/nrf52840dk/board.mk | 5 + hw/bsp/nrf/boards/nrf52840dk/ozone/nrf52840.jdebug | 238 +++++++++++++++++++++ hw/bsp/nrf/boards/nrf52840dongle/board.cmake | 5 + hw/bsp/nrf/boards/nrf52840dongle/board.h | 57 +++++ hw/bsp/nrf/boards/nrf52840dongle/board.mk | 15 ++ hw/bsp/nrf/boards/nrf52840dongle/nrf52840dongle.ld | 13 ++ hw/bsp/nrf/boards/nrf54h20dk/board.h | 2 +- hw/bsp/nrf/boards/pca10056/board.cmake | 10 - hw/bsp/nrf/boards/pca10056/board.h | 65 ------ hw/bsp/nrf/boards/pca10056/board.mk | 5 - hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug | 238 --------------------- hw/bsp/nrf/boards/pca10059/board.cmake | 5 - hw/bsp/nrf/boards/pca10059/board.h | 57 ----- hw/bsp/nrf/boards/pca10059/board.mk | 15 -- hw/bsp/nrf/boards/pca10059/pca10059.ld | 13 -- 19 files changed, 416 insertions(+), 415 deletions(-) create mode 100644 hw/bsp/nrf/boards/nrf52840dk/board.cmake create mode 100644 hw/bsp/nrf/boards/nrf52840dk/board.h create mode 100644 hw/bsp/nrf/boards/nrf52840dk/board.mk create mode 100644 hw/bsp/nrf/boards/nrf52840dk/ozone/nrf52840.jdebug create mode 100644 hw/bsp/nrf/boards/nrf52840dongle/board.cmake create mode 100644 hw/bsp/nrf/boards/nrf52840dongle/board.h create mode 100644 hw/bsp/nrf/boards/nrf52840dongle/board.mk create mode 100644 hw/bsp/nrf/boards/nrf52840dongle/nrf52840dongle.ld delete mode 100644 hw/bsp/nrf/boards/pca10056/board.cmake delete mode 100644 hw/bsp/nrf/boards/pca10056/board.h delete mode 100644 hw/bsp/nrf/boards/pca10056/board.mk delete mode 100644 hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug delete mode 100644 hw/bsp/nrf/boards/pca10059/board.cmake delete mode 100644 hw/bsp/nrf/boards/pca10059/board.h delete mode 100644 hw/bsp/nrf/boards/pca10059/board.mk delete mode 100644 hw/bsp/nrf/boards/pca10059/pca10059.ld diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index 3f8277247..e668e2693 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -202,10 +202,11 @@ circuitplayground_bluefruit Adafruit Circuit Playground Bluefruit nrf ht feather_nrf52840_express Adafruit Feather nRF52840 Express nrf https://www.adafruit.com/product/4062 feather_nrf52840_sense Adafruit Feather nRF52840 Sense nrf https://www.adafruit.com/product/4516 itsybitsy_nrf52840 Adafruit ItsyBitsy nRF52840 Express nrf https://www.adafruit.com/product/4481 -pca10056 Nordic nRF52840DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK -pca10059 Nordic nRF52840 Dongle nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle -pca10095 Nordic nRF5340 DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK -pca10100 Nordic nRF52833 DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK +nrf52833dk Nordic nRF52833 DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK +nrf52840dk Nordic nRF52840DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK +nrf52840dongle Nordic nRF52840 Dongle nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle +nrf5340dk Nordic nRF5340 DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK +nrf54h20dk Nordic nRF54H20 DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK =========================== ===================================== ======== ============================================================================== ====== Raspberry Pi @@ -298,8 +299,8 @@ stm32l4p5nucleo STM32 L4P5 Nucleo stm32l4 https://www.s stm32l4r5nucleo STM32 L4R5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html stm32n6570dk STM32 N6570-DK stm32n6 https://www.st.com/en/evaluation-tools/stm32n6570-dk.html stm32n657nucleo STM32 N657X0-Q Nucleo stm32n6 https://www.st.com/en/evaluation-tools/nucleo-n657x0-q.html +stm32u083cdk STM32U083C-DK Discovery Kit stm32u0 https://www.st.com/en/evaluation-tools/stm32u083c-dk.html b_u585i_iot2a STM32 B-U585i IOT2A Discovery kit stm32u5 https://www.st.com/en/evaluation-tools/b-u585i-iot02a.html -stm32u083cdk STM32 U083C Discovery Kit stm32u0 https://www.st.com/en/evaluation-tools/stm32u083c-dk.html stm32u545nucleo STM32 U545 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u545re-q.html stm32u575eval STM32 U575 Eval stm32u5 https://www.st.com/en/evaluation-tools/stm32u575i-ev.html stm32u575nucleo STM32 U575 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u575zi-q.html diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index 1a088c989..9ca9b0b54 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -22,7 +22,7 @@ hw/mcu/gd/nuclei-sdk https://github.com/Nuclei-Software/nuc hw/mcu/infineon/mtb-xmclib-cat3 https://github.com/Infineon/mtb-xmclib-cat3.git daf5500d03cba23e68c2f241c30af79cd9d63880 xmc4000 hw/mcu/microchip https://github.com/hathach/microchip_driver.git 9e8b37e307d8404033bb881623a113931e1edf27 sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg hw/mcu/mindmotion/mm32sdk https://github.com/hathach/mm32sdk.git b93e856211060ae825216c6a1d6aa347ec758843 mm32 -hw/mcu/nordic/nrfx https://github.com/NordicSemiconductor/nrfx.git 7c47cc0a56ce44658e6da2458e86cd8783ccc4a2 nrf +hw/mcu/nordic/nrfx https://github.com/NordicSemiconductor/nrfx.git 11f57e578c7feea13f21c79ea0efab2630ac68c7 nrf hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver.git 2204191ec76283371419fbcec207da02e1bc22fa nuc hw/mcu/nxp/lpcopen https://github.com/hathach/nxp_lpcopen.git b41cf930e65c734d8ec6de04f1d57d46787c76ae lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 hw/mcu/nxp/mcux-sdk https://github.com/nxp-mcuxpresso/mcux-sdk a1bdae309a14ec95a4f64a96d3315a4f89c397c6 kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt diff --git a/hw/bsp/nrf/boards/nrf52840dk/board.cmake b/hw/bsp/nrf/boards/nrf52840dk/board.cmake new file mode 100644 index 000000000..85314f3bc --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52840dk/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT nrf52840) + +function(update_board TARGET) +endfunction() + +#board_runner_args(jlink "--device=nRF52840_xxAA" "--speed=4000") +#include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake) +#include(${ZEPHYR_BASE}/boards/common/nrfutil.board.cmake) +#include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake) +#include(${ZEPHYR_BASE}/boards/common/openocd-nrf5.board.cmake) diff --git a/hw/bsp/nrf/boards/nrf52840dk/board.h b/hw/bsp/nrf/boards/nrf52840dk/board.h new file mode 100644 index 000000000..ec632e769 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52840dk/board.h @@ -0,0 +1,65 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Nordic nRF52840DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN 13 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN 25 // button 4 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +// SPI for USB host shield +// Pin is correct but not working probably due to signal incompatible (1.8V 3v3) with MAC3421E !? +//#define MAX3421_SCK_PIN _PINNUM(1, 15) +//#define MAX3421_MOSI_PIN _PINNUM(1, 13) +//#define MAX3421_MISO_PIN _PINNUM(1, 14) +//#define MAX3421_CS_PIN _PINNUM(1, 12) +//#define MAX3421_INTR_PIN _PINNUM(1, 11) + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/nrf52840dk/board.mk b/hw/bsp/nrf/boards/nrf52840dk/board.mk new file mode 100644 index 000000000..d8bbd41f8 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52840dk/board.mk @@ -0,0 +1,5 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/nrf/boards/nrf52840dk/ozone/nrf52840.jdebug b/hw/bsp/nrf/boards/nrf52840dk/ozone/nrf52840.jdebug new file mode 100644 index 000000000..fa7ab9e23 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52840dk/ozone/nrf52840.jdebug @@ -0,0 +1,238 @@ + +/********************************************************************* +* +* OnProjectLoad +* +* Function description +* Project load routine. Required. +* +********************************************************************** +*/ +void OnProjectLoad (void) { + // Dialog-generated settings + Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M4F.svd"); + Project.AddSvdFile ("$(InstallDir)/Config/Peripherals/ARMv7M.svd"); + + Project.SetDevice ("nRF52840_xxAA"); + Project.SetHostIF ("USB", ""); + Project.SetTargetIF ("SWD"); + Project.SetTIFSpeed ("8 MHz"); + Project.SetTraceSource ("Trace Pins"); + Project.SetTracePortWidth (4); + + // User settings + File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-pca10056/cdc_msc.elf"); +} + +/********************************************************************* +* +* TargetReset +* +* Function description +* Replaces the default target device reset routine. Optional. +* +* Notes +* This example demonstrates the usage when +* debugging a RAM program on a Cortex-M target device +* +********************************************************************** +*/ +//void TargetReset (void) { +// +// unsigned int SP; +// unsigned int PC; +// unsigned int VectorTableAddr; +// +// Exec.Reset(); +// +// VectorTableAddr = Elf.GetBaseAddr(); +// +// if (VectorTableAddr != 0xFFFFFFFF) { +// +// Util.Log("Resetting Program."); +// +// SP = Target.ReadU32(VectorTableAddr); +// Target.SetReg("SP", SP); +// +// PC = Target.ReadU32(VectorTableAddr + 4); +// Target.SetReg("PC", PC); +// } +//} + +/********************************************************************* +* +* BeforeTargetReset +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetReset (void) { +//} + +/********************************************************************* +* +* AfterTargetReset +* +* Function description +* Event handler routine. +* - Sets the PC register to program reset value. +* - Sets the SP register to program reset value on Cortex-M. +* +********************************************************************** +*/ +void AfterTargetReset (void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + VectorTableAddr = Elf.GetBaseAddr(); + + if (VectorTableAddr == 0xFFFFFFFF) { + Util.Log("Project file error: failed to get program base"); + } else { + SP = Target.ReadU32(VectorTableAddr); + Target.SetReg("SP", SP); + + PC = Target.ReadU32(VectorTableAddr + 4); + Target.SetReg("PC", PC); + } +} + +/********************************************************************* +* +* DebugStart +* +* Function description +* Replaces the default debug session startup routine. Optional. +* +********************************************************************** +*/ +//void DebugStart (void) { +//} + +/********************************************************************* +* +* TargetConnect +* +* Function description +* Replaces the default target IF connection routine. Optional. +* +********************************************************************** +*/ +//void TargetConnect (void) { +//} + +/********************************************************************* +* +* BeforeTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +void BeforeTargetConnect (void) { +} + +/********************************************************************* +* +* AfterTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetConnect (void) { +//} + +/********************************************************************* +* +* TargetDownload +* +* Function description +* Replaces the default program download routine. Optional. +* +********************************************************************** +*/ +//void TargetDownload (void) { +//} + +/********************************************************************* +* +* BeforeTargetDownload +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDownload (void) { +//} + +/********************************************************************* +* +* AfterTargetDownload +* +* Function description +* Event handler routine. +* - Sets the PC register to program reset value. +* - Sets the SP register to program reset value on Cortex-M. +* +********************************************************************** +*/ +void AfterTargetDownload (void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + VectorTableAddr = Elf.GetBaseAddr(); + + if (VectorTableAddr == 0xFFFFFFFF) { + Util.Log("Project file error: failed to get program base"); + } else { + SP = Target.ReadU32(VectorTableAddr); + Target.SetReg("SP", SP); + + PC = Target.ReadU32(VectorTableAddr + 4); + Target.SetReg("PC", PC); + } +} + +/********************************************************************* +* +* BeforeTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetHalt +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetHalt (void) { +//} diff --git a/hw/bsp/nrf/boards/nrf52840dongle/board.cmake b/hw/bsp/nrf/boards/nrf52840dongle/board.cmake new file mode 100644 index 000000000..5ec769192 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52840dongle/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/nrf52840dongle/board.h b/hw/bsp/nrf/boards/nrf52840dongle/board.h new file mode 100644 index 000000000..3b95481ad --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52840dongle/board.h @@ -0,0 +1,57 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Nordic nRF52840 Dongle + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define _PINNUM(port, pin) ((port)*32 + (pin)) + +// LED +#define LED_PIN 8 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN _PINNUM(1, 6) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/nrf52840dongle/board.mk b/hw/bsp/nrf/boards/nrf52840dongle/board.mk new file mode 100644 index 000000000..0b82ecdbb --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52840dongle/board.mk @@ -0,0 +1,15 @@ +MCU_VARIANT = nrf52840 +CFLAGS += -DNRF52840_XXAA + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# flash using Nordic nrfutil (pip2 install nrfutil) +# make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash +NRFUTIL = nrfutil + +$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex + $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ + +flash: $(BUILD)/$(PROJECT).zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/hw/bsp/nrf/boards/nrf52840dongle/nrf52840dongle.ld b/hw/bsp/nrf/boards/nrf52840dongle/nrf52840dongle.ld new file mode 100644 index 000000000..32cc6eada --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52840dongle/nrf52840dongle.ld @@ -0,0 +1,13 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xff000 + RAM (rwx) : ORIGIN = 0x20000008, LENGTH = 0x3fff8 +} + + +INCLUDE "nrf_common.ld" diff --git a/hw/bsp/nrf/boards/nrf54h20dk/board.h b/hw/bsp/nrf/boards/nrf54h20dk/board.h index 1c7981049..c8ed5779f 100644 --- a/hw/bsp/nrf/boards/nrf54h20dk/board.h +++ b/hw/bsp/nrf/boards/nrf54h20dk/board.h @@ -25,7 +25,7 @@ */ /* metadata: - name: Nordic nRF5340 DK + name: Nordic nRF54H20 DK url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK */ diff --git a/hw/bsp/nrf/boards/pca10056/board.cmake b/hw/bsp/nrf/boards/pca10056/board.cmake deleted file mode 100644 index 85314f3bc..000000000 --- a/hw/bsp/nrf/boards/pca10056/board.cmake +++ /dev/null @@ -1,10 +0,0 @@ -set(MCU_VARIANT nrf52840) - -function(update_board TARGET) -endfunction() - -#board_runner_args(jlink "--device=nRF52840_xxAA" "--speed=4000") -#include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake) -#include(${ZEPHYR_BASE}/boards/common/nrfutil.board.cmake) -#include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake) -#include(${ZEPHYR_BASE}/boards/common/openocd-nrf5.board.cmake) diff --git a/hw/bsp/nrf/boards/pca10056/board.h b/hw/bsp/nrf/boards/pca10056/board.h deleted file mode 100644 index ec632e769..000000000 --- a/hw/bsp/nrf/boards/pca10056/board.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Nordic nRF52840DK - url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN 13 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN 25 // button 4 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 8 -#define UART_TX_PIN 6 - -// SPI for USB host shield -// Pin is correct but not working probably due to signal incompatible (1.8V 3v3) with MAC3421E !? -//#define MAX3421_SCK_PIN _PINNUM(1, 15) -//#define MAX3421_MOSI_PIN _PINNUM(1, 13) -//#define MAX3421_MISO_PIN _PINNUM(1, 14) -//#define MAX3421_CS_PIN _PINNUM(1, 12) -//#define MAX3421_INTR_PIN _PINNUM(1, 11) - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/pca10056/board.mk b/hw/bsp/nrf/boards/pca10056/board.mk deleted file mode 100644 index d8bbd41f8..000000000 --- a/hw/bsp/nrf/boards/pca10056/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug b/hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug deleted file mode 100644 index fa7ab9e23..000000000 --- a/hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug +++ /dev/null @@ -1,238 +0,0 @@ - -/********************************************************************* -* -* OnProjectLoad -* -* Function description -* Project load routine. Required. -* -********************************************************************** -*/ -void OnProjectLoad (void) { - // Dialog-generated settings - Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M4F.svd"); - Project.AddSvdFile ("$(InstallDir)/Config/Peripherals/ARMv7M.svd"); - - Project.SetDevice ("nRF52840_xxAA"); - Project.SetHostIF ("USB", ""); - Project.SetTargetIF ("SWD"); - Project.SetTIFSpeed ("8 MHz"); - Project.SetTraceSource ("Trace Pins"); - Project.SetTracePortWidth (4); - - // User settings - File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-pca10056/cdc_msc.elf"); -} - -/********************************************************************* -* -* TargetReset -* -* Function description -* Replaces the default target device reset routine. Optional. -* -* Notes -* This example demonstrates the usage when -* debugging a RAM program on a Cortex-M target device -* -********************************************************************** -*/ -//void TargetReset (void) { -// -// unsigned int SP; -// unsigned int PC; -// unsigned int VectorTableAddr; -// -// Exec.Reset(); -// -// VectorTableAddr = Elf.GetBaseAddr(); -// -// if (VectorTableAddr != 0xFFFFFFFF) { -// -// Util.Log("Resetting Program."); -// -// SP = Target.ReadU32(VectorTableAddr); -// Target.SetReg("SP", SP); -// -// PC = Target.ReadU32(VectorTableAddr + 4); -// Target.SetReg("PC", PC); -// } -//} - -/********************************************************************* -* -* BeforeTargetReset -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetReset (void) { -//} - -/********************************************************************* -* -* AfterTargetReset -* -* Function description -* Event handler routine. -* - Sets the PC register to program reset value. -* - Sets the SP register to program reset value on Cortex-M. -* -********************************************************************** -*/ -void AfterTargetReset (void) { - unsigned int SP; - unsigned int PC; - unsigned int VectorTableAddr; - - VectorTableAddr = Elf.GetBaseAddr(); - - if (VectorTableAddr == 0xFFFFFFFF) { - Util.Log("Project file error: failed to get program base"); - } else { - SP = Target.ReadU32(VectorTableAddr); - Target.SetReg("SP", SP); - - PC = Target.ReadU32(VectorTableAddr + 4); - Target.SetReg("PC", PC); - } -} - -/********************************************************************* -* -* DebugStart -* -* Function description -* Replaces the default debug session startup routine. Optional. -* -********************************************************************** -*/ -//void DebugStart (void) { -//} - -/********************************************************************* -* -* TargetConnect -* -* Function description -* Replaces the default target IF connection routine. Optional. -* -********************************************************************** -*/ -//void TargetConnect (void) { -//} - -/********************************************************************* -* -* BeforeTargetConnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -void BeforeTargetConnect (void) { -} - -/********************************************************************* -* -* AfterTargetConnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void AfterTargetConnect (void) { -//} - -/********************************************************************* -* -* TargetDownload -* -* Function description -* Replaces the default program download routine. Optional. -* -********************************************************************** -*/ -//void TargetDownload (void) { -//} - -/********************************************************************* -* -* BeforeTargetDownload -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetDownload (void) { -//} - -/********************************************************************* -* -* AfterTargetDownload -* -* Function description -* Event handler routine. -* - Sets the PC register to program reset value. -* - Sets the SP register to program reset value on Cortex-M. -* -********************************************************************** -*/ -void AfterTargetDownload (void) { - unsigned int SP; - unsigned int PC; - unsigned int VectorTableAddr; - - VectorTableAddr = Elf.GetBaseAddr(); - - if (VectorTableAddr == 0xFFFFFFFF) { - Util.Log("Project file error: failed to get program base"); - } else { - SP = Target.ReadU32(VectorTableAddr); - Target.SetReg("SP", SP); - - PC = Target.ReadU32(VectorTableAddr + 4); - Target.SetReg("PC", PC); - } -} - -/********************************************************************* -* -* BeforeTargetDisconnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void BeforeTargetDisconnect (void) { -//} - -/********************************************************************* -* -* AfterTargetDisconnect -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void AfterTargetDisconnect (void) { -//} - -/********************************************************************* -* -* AfterTargetHalt -* -* Function description -* Event handler routine. Optional. -* -********************************************************************** -*/ -//void AfterTargetHalt (void) { -//} diff --git a/hw/bsp/nrf/boards/pca10059/board.cmake b/hw/bsp/nrf/boards/pca10059/board.cmake deleted file mode 100644 index c79eb5964..000000000 --- a/hw/bsp/nrf/boards/pca10059/board.cmake +++ /dev/null @@ -1,5 +0,0 @@ -set(MCU_VARIANT nrf52840) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/pca10059.ld) - -function(update_board TARGET) -endfunction() diff --git a/hw/bsp/nrf/boards/pca10059/board.h b/hw/bsp/nrf/boards/pca10059/board.h deleted file mode 100644 index 3b95481ad..000000000 --- a/hw/bsp/nrf/boards/pca10059/board.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Nordic nRF52840 Dongle - url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define _PINNUM(port, pin) ((port)*32 + (pin)) - -// LED -#define LED_PIN 8 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN _PINNUM(1, 6) -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 8 -#define UART_TX_PIN 6 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/nrf/boards/pca10059/board.mk b/hw/bsp/nrf/boards/pca10059/board.mk deleted file mode 100644 index 0b82ecdbb..000000000 --- a/hw/bsp/nrf/boards/pca10059/board.mk +++ /dev/null @@ -1,15 +0,0 @@ -MCU_VARIANT = nrf52840 -CFLAGS += -DNRF52840_XXAA - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# flash using Nordic nrfutil (pip2 install nrfutil) -# make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash -NRFUTIL = nrfutil - -$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex - $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ - -flash: $(BUILD)/$(PROJECT).zip - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/hw/bsp/nrf/boards/pca10059/pca10059.ld b/hw/bsp/nrf/boards/pca10059/pca10059.ld deleted file mode 100644 index 32cc6eada..000000000 --- a/hw/bsp/nrf/boards/pca10059/pca10059.ld +++ /dev/null @@ -1,13 +0,0 @@ -/* Linker script to configure memory regions. */ - -SEARCH_DIR(.) -/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xff000 - RAM (rwx) : ORIGIN = 0x20000008, LENGTH = 0x3fff8 -} - - -INCLUDE "nrf_common.ld" -- cgit v1.3.1 From e0ee32ce6a1655de6dbb86178649c0ec878bd0d0 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 13 Oct 2025 16:46:02 +0700 Subject: fix build with west zephyr --- .github/workflows/build.yml | 4 +-- .idea/debugServers/lpc1769.xml | 13 ++++++++ .idea/debugServers/lpc55s69.xml | 13 ++++++++ .idea/debugServers/nrf52833.xml | 13 ++++++++ .idea/debugServers/nrf5340.xml | 13 ++++++++ .idea/debugServers/stm32f411.xml | 13 ++++++++ hw/bsp/nrf/family.c | 49 ++++++++++++++++------------- hw/bsp/nrf/nrfx_config/nrfx_config_common.h | 2 -- hw/bsp/zephyr_board_aliases.cmake | 2 +- 9 files changed, 95 insertions(+), 27 deletions(-) create mode 100644 .idea/debugServers/lpc1769.xml create mode 100644 .idea/debugServers/lpc55s69.xml create mode 100644 .idea/debugServers/nrf52833.xml create mode 100644 .idea/debugServers/nrf5340.xml create mode 100644 .idea/debugServers/stm32f411.xml diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 16f906632..becbc5069 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -161,8 +161,8 @@ jobs: - name: Build run: | - west build -b pca10056 -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr - west build -b pca10056 -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr + west build -b nrf52840dk -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr + west build -b nrf52840dk -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr # --------------------------------------- # Hardware in the loop (HIL) diff --git a/.idea/debugServers/lpc1769.xml b/.idea/debugServers/lpc1769.xml new file mode 100644 index 000000000..4acfe6afe --- /dev/null +++ b/.idea/debugServers/lpc1769.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/lpc55s69.xml b/.idea/debugServers/lpc55s69.xml new file mode 100644 index 000000000..ceedab0af --- /dev/null +++ b/.idea/debugServers/lpc55s69.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/nrf52833.xml b/.idea/debugServers/nrf52833.xml new file mode 100644 index 000000000..09d2ae3d3 --- /dev/null +++ b/.idea/debugServers/nrf52833.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/nrf5340.xml b/.idea/debugServers/nrf5340.xml new file mode 100644 index 000000000..ac3bd59fa --- /dev/null +++ b/.idea/debugServers/nrf5340.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/stm32f411.xml b/.idea/debugServers/stm32f411.xml new file mode 100644 index 000000000..2bcdf3829 --- /dev/null +++ b/.idea/debugServers/stm32f411.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 6edeacd87..0221da083 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -66,20 +66,6 @@ #error "Example requires nrfx v3.0.0 or later" #endif -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -#if defined(NRF54H20_XXAA) -#define USBD_IRQn USBHS_IRQn -void USBHS_IRQHandler(void) { - tusb_int_handler(0, true); -} - -#else -void USBD_IRQHandler(void) { - tud_int_handler(0); -} -#endif /*------------------------------------------------------------------*/ /* MACRO TYPEDEF CONSTANT ENUM @@ -92,18 +78,37 @@ enum { USB_EVT_READY = 2 }; +// Forward USB interrupt events to TinyUSB IRQ Handler +#if defined(NRF54H20_XXAA) +#define USBD_IRQn USBHS_IRQn +void USBHS_IRQHandler(void) { + tusb_int_handler(0, true); +} + +static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(120); + +#else + #ifdef NRF5340_XXAA - #define LFCLK_SRC_RC CLOCK_LFCLKSRC_SRC_LFRC - #define VBUSDETECT_Msk USBREG_USBREGSTATUS_VBUSDETECT_Msk - #define OUTPUTRDY_Msk USBREG_USBREGSTATUS_OUTPUTRDY_Msk - #define GPIOTE_IRQn GPIOTE1_IRQn +#define LFCLK_SRC_RC CLOCK_LFCLKSRC_SRC_LFRC +#define VBUSDETECT_Msk USBREG_USBREGSTATUS_VBUSDETECT_Msk +#define OUTPUTRDY_Msk USBREG_USBREGSTATUS_OUTPUTRDY_Msk +#define GPIOTE_IRQn GPIOTE1_IRQn #else - #define LFCLK_SRC_RC CLOCK_LFCLKSRC_SRC_RC - #define VBUSDETECT_Msk POWER_USBREGSTATUS_VBUSDETECT_Msk - #define OUTPUTRDY_Msk POWER_USBREGSTATUS_OUTPUTRDY_Msk +#define LFCLK_SRC_RC CLOCK_LFCLKSRC_SRC_RC +#define VBUSDETECT_Msk POWER_USBREGSTATUS_VBUSDETECT_Msk +#define OUTPUTRDY_Msk POWER_USBREGSTATUS_OUTPUTRDY_Msk #endif -static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(CFG_NRFX_UARTE_INSTANCE_ID); +static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0); + +void USBD_IRQHandler(void) { + tud_int_handler(0); +} +#endif + + + // tinyusb function that handles power event (detected, ready, removed) // We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. diff --git a/hw/bsp/nrf/nrfx_config/nrfx_config_common.h b/hw/bsp/nrf/nrfx_config/nrfx_config_common.h index 1d75e5a66..a5a29bb8e 100644 --- a/hw/bsp/nrf/nrfx_config/nrfx_config_common.h +++ b/hw/bsp/nrf/nrfx_config/nrfx_config_common.h @@ -61,7 +61,6 @@ #if defined(NRF54H20_XXAA) #define NRFX_UARTE120_ENABLED 1 -#define CFG_NRFX_UARTE_INSTANCE_ID 120 #else @@ -69,7 +68,6 @@ #define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 #define NRFX_UARTE0_ENABLED 1 -#define CFG_NRFX_UARTE_INSTANCE_ID 0 #define NRFX_GPIOTE_ENABLED 1 #define NRFX_GPIOTE0_ENABLED 1 diff --git a/hw/bsp/zephyr_board_aliases.cmake b/hw/bsp/zephyr_board_aliases.cmake index b60e97ef4..a60068208 100644 --- a/hw/bsp/zephyr_board_aliases.cmake +++ b/hw/bsp/zephyr_board_aliases.cmake @@ -1,2 +1,2 @@ -set(pca10056_BOARD_ALIAS nrf52840dk/nrf52840) +set(nrf52840dk_BOARD_ALIAS nrf52840dk/nrf52840) set(stm32n657nucleo_BOARD_ALIAS nucleo_n657x0_q) -- cgit v1.3.1 From 8242ffd04a840599b1520cb75988a89fde336588 Mon Sep 17 00:00:00 2001 From: Qodana Application Date: Mon, 13 Oct 2025 10:23:36 +0000 Subject: Add qodana.yaml file --- qodana.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 qodana.yaml diff --git a/qodana.yaml b/qodana.yaml new file mode 100644 index 000000000..014cf3bae --- /dev/null +++ b/qodana.yaml @@ -0,0 +1,10 @@ +#################################################################################################################### +# WARNING: Do not store sensitive information in this file, as its contents will be included in the Qodana report. # +#################################################################################################################### + +version: "1.0" +linter: jetbrains/qodana-jvm-community:2025.2 +profile: + name: qodana.recommended +include: + - name: CheckDependencyLicenses \ No newline at end of file -- cgit v1.3.1 From 23fc90afae86d4cf9784c34104b92838e060eec0 Mon Sep 17 00:00:00 2001 From: Qodana Application Date: Mon, 13 Oct 2025 10:23:36 +0000 Subject: Add github workflow file --- .github/workflows/qodana_code_quality.yml | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 .github/workflows/qodana_code_quality.yml diff --git a/.github/workflows/qodana_code_quality.yml b/.github/workflows/qodana_code_quality.yml new file mode 100644 index 000000000..69b92f029 --- /dev/null +++ b/.github/workflows/qodana_code_quality.yml @@ -0,0 +1,28 @@ +name: Qodana +on: + workflow_dispatch: + pull_request: + push: + branches: # Specify your branches here + - main # The 'main' branch + - 'releases/*' # The release branches + +jobs: + qodana: + runs-on: ubuntu-latest + permissions: + contents: write + pull-requests: write + checks: write + steps: + - uses: actions/checkout@v3 + with: + ref: ${{ github.event.pull_request.head.sha }} # to check out the actual pull request commit, not the merge commit + fetch-depth: 0 # a full history is required for pull request analysis + - name: 'Qodana Scan' + uses: JetBrains/qodana-action@v2025.2 + with: + pr-mode: false + env: + QODANA_TOKEN: ${{ secrets.QODANA_TOKEN_725560778 }} + QODANA_ENDPOINT: 'https://qodana.cloud' \ No newline at end of file -- cgit v1.3.1 From 92d3414fe1c2407af6331a4829bd08d1dc1bab10 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Mon, 13 Oct 2025 18:22:58 +0700 Subject: Revert "Add qodana CI checks" --- .github/workflows/qodana_code_quality.yml | 28 ---------------------------- qodana.yaml | 10 ---------- 2 files changed, 38 deletions(-) delete mode 100644 .github/workflows/qodana_code_quality.yml delete mode 100644 qodana.yaml diff --git a/.github/workflows/qodana_code_quality.yml b/.github/workflows/qodana_code_quality.yml deleted file mode 100644 index 69b92f029..000000000 --- a/.github/workflows/qodana_code_quality.yml +++ /dev/null @@ -1,28 +0,0 @@ -name: Qodana -on: - workflow_dispatch: - pull_request: - push: - branches: # Specify your branches here - - main # The 'main' branch - - 'releases/*' # The release branches - -jobs: - qodana: - runs-on: ubuntu-latest - permissions: - contents: write - pull-requests: write - checks: write - steps: - - uses: actions/checkout@v3 - with: - ref: ${{ github.event.pull_request.head.sha }} # to check out the actual pull request commit, not the merge commit - fetch-depth: 0 # a full history is required for pull request analysis - - name: 'Qodana Scan' - uses: JetBrains/qodana-action@v2025.2 - with: - pr-mode: false - env: - QODANA_TOKEN: ${{ secrets.QODANA_TOKEN_725560778 }} - QODANA_ENDPOINT: 'https://qodana.cloud' \ No newline at end of file diff --git a/qodana.yaml b/qodana.yaml deleted file mode 100644 index 014cf3bae..000000000 --- a/qodana.yaml +++ /dev/null @@ -1,10 +0,0 @@ -#################################################################################################################### -# WARNING: Do not store sensitive information in this file, as its contents will be included in the Qodana report. # -#################################################################################################################### - -version: "1.0" -linter: jetbrains/qodana-jvm-community:2025.2 -profile: - name: qodana.recommended -include: - - name: CheckDependencyLicenses \ No newline at end of file -- cgit v1.3.1 From 0c3631c91d906d1308f1dc6e1afff93dc9495bf6 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 13 Oct 2025 18:49:34 +0700 Subject: add tools that provided freely to develop project --- README.rst | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/README.rst b/README.rst index 03ad3744c..3a227d345 100644 --- a/README.rst +++ b/README.rst @@ -241,6 +241,15 @@ Table Legend \[empty\] Unknown ========= ========================= +Development Tools +================= + +The following tools are provided freely to support the development of the TinyUSB project: + +- `IAR Build Tools (CX) `_ Professional IDE and compiler for embedded development +- `JetBrains CLion `_ Cross-platform IDE for C and C++ development +- `PVS-Studio `_ static analyzer for C, C++, C#, and Java code. + .. |Build Status| image:: https://github.com/hathach/tinyusb/actions/workflows/build.yml/badge.svg :target: https://github.com/hathach/tinyusb/actions -- cgit v1.3.1 From 9a25b9e51ac178ea8feb699cc3d98cc573e9f61b Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Tue, 14 Oct 2025 11:58:07 +0700 Subject: Update README.rst Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- README.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.rst b/README.rst index 3a227d345..3ea1bd018 100644 --- a/README.rst +++ b/README.rst @@ -246,8 +246,8 @@ Development Tools The following tools are provided freely to support the development of the TinyUSB project: -- `IAR Build Tools (CX) `_ Professional IDE and compiler for embedded development -- `JetBrains CLion `_ Cross-platform IDE for C and C++ development +- `IAR Build Tools (CX) `_ Professional IDE and compiler for embedded development. +- `JetBrains CLion `_ Cross-platform IDE for C and C++ development. - `PVS-Studio `_ static analyzer for C, C++, C#, and Java code. -- cgit v1.3.1 From 9bf18d080b202e8e09bd76f32272b1dbfabfa3b9 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 14 Oct 2025 15:14:43 +0700 Subject: move make.mk to hw/bsp/family_support.mk --- examples/build_system/make/make.mk | 190 --------------------- examples/device/audio_4_channel_mic/Makefile | 2 +- .../device/audio_4_channel_mic_freertos/Makefile | 2 +- examples/device/audio_test/Makefile | 2 +- examples/device/audio_test_freertos/Makefile | 2 +- examples/device/audio_test_multi_rate/Makefile | 2 +- examples/device/board_test/Makefile | 2 +- examples/device/cdc_dual_ports/Makefile | 2 +- examples/device/cdc_msc/Makefile | 2 +- examples/device/cdc_msc_freertos/Makefile | 2 +- examples/device/cdc_uac2/Makefile | 2 +- examples/device/dfu/Makefile | 2 +- examples/device/dfu_runtime/Makefile | 2 +- examples/device/dynamic_configuration/Makefile | 2 +- examples/device/hid_boot_interface/Makefile | 2 +- examples/device/hid_composite/Makefile | 2 +- examples/device/hid_composite_freertos/Makefile | 2 +- examples/device/hid_generic_inout/Makefile | 2 +- examples/device/hid_multiple_interface/Makefile | 2 +- examples/device/midi_test/Makefile | 2 +- examples/device/midi_test_freertos/Makefile | 2 +- examples/device/msc_dual_lun/Makefile | 2 +- examples/device/mtp/Makefile | 2 +- examples/device/net_lwip_webserver/Makefile | 2 +- examples/device/uac2_headset/Makefile | 2 +- examples/device/uac2_speaker_fb/Makefile | 2 +- examples/device/usbtmc/Makefile | 2 +- examples/device/video_capture/Makefile | 2 +- examples/device/video_capture_2ch/Makefile | 2 +- examples/device/webusb_serial/Makefile | 2 +- examples/dual/host_hid_to_device_cdc/Makefile | 2 +- examples/dual/host_info_to_device_cdc/Makefile | 2 +- examples/host/bare_api/Makefile | 2 +- examples/host/cdc_msc_hid/Makefile | 2 +- examples/host/cdc_msc_hid_freertos/Makefile | 2 +- examples/host/device_info/Makefile | 2 +- examples/host/hid_controller/Makefile | 2 +- examples/host/midi_rx/Makefile | 2 +- examples/host/msc_file_explorer/Makefile | 2 +- examples/typec/power_delivery/Makefile | 2 +- hw/bsp/family_support.mk | 187 ++++++++++++++++++++ 41 files changed, 226 insertions(+), 229 deletions(-) delete mode 100644 examples/build_system/make/make.mk create mode 100644 hw/bsp/family_support.mk diff --git a/examples/build_system/make/make.mk b/examples/build_system/make/make.mk deleted file mode 100644 index 4f5d3242e..000000000 --- a/examples/build_system/make/make.mk +++ /dev/null @@ -1,190 +0,0 @@ -# --------------------------------------- -# Common make definition for all examples -# --------------------------------------- - -# upper helper function -to_upper = $(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,$(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,$(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,$(subst x,X,$(subst y,Y,$(subst z,Z,$(subst -,_,$(1)))))))))))))))))))))))))))) - -#------------------------------------------------------------- -# Toolchain -# Can be changed via TOOLCHAIN=gcc|iar or CC=arm-none-eabi-gcc|iccarm|clang -#------------------------------------------------------------- -ifneq (,$(findstring clang,$(CC))) - TOOLCHAIN = clang -else ifneq (,$(findstring iccarm,$(CC))) - TOOLCHAIN = iar -else ifneq (,$(findstring gcc,$(CC))) - TOOLCHAIN = gcc -endif - -# Default to GCC -ifndef TOOLCHAIN - TOOLCHAIN = gcc -endif - -#-------------- TOP and CURRENT_PATH ------------ - -# Set TOP to be the path to get from the current directory (where make was invoked) to the top of the tree. -# $(lastword $(MAKEFILE_LIST)) returns the name of this makefile relative to where make was invoked. -THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) - -# strip off /examples/build_system/make to get for example ../../.. -# and Set TOP to an absolute path -TOP = $(abspath $(subst make.mk,../../..,$(THIS_MAKEFILE))) - -# Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos -CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) - -#-------------- Linux/Windows ------------ - -# Detect whether shell style is windows or not -# https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 -ifeq '$(findstring ;,$(PATH))' ';' -# PATH contains semicolon - so we're definitely on Windows. -CMDEXE := 1 - -# makefile shell commands should use syntax for DOS CMD, not unix sh -# Force DOS command shell on Windows. -SHELL := cmd.exe -endif - -ifeq ($(CMDEXE),1) - CP = copy - RM = del - MKDIR = mkdir - PYTHON = python -else - CP = cp - RM = rm - MKDIR = mkdir - PYTHON = python3 -endif - - -# Build directory -BUILD := _build/$(BOARD) - -PROJECT := $(notdir $(CURDIR)) -BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) - -#------------------------------------------------------------- -# Board / Family -#------------------------------------------------------------- - -# Board without family -ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) - BOARD_PATH := hw/bsp/$(BOARD) - FAMILY := -endif - -# Board within family -ifeq ($(BOARD_PATH),) - BOARD_PATH := $(subst $(TOP)/,,$(wildcard $(TOP)/hw/bsp/*/boards/$(BOARD))) - FAMILY := $(word 3, $(subst /, ,$(BOARD_PATH))) - FAMILY_PATH = hw/bsp/$(FAMILY) -endif - -ifeq ($(BOARD_PATH),) - $(info You must provide a BOARD parameter with 'BOARD=') - $(error Invalid BOARD specified) -endif - -ifeq ($(FAMILY),) - include $(TOP)/hw/bsp/$(BOARD)/board.mk -else - # Include Family and Board specific defs - include $(TOP)/$(FAMILY_PATH)/family.mk - SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) -endif - -#------------------------------------------------------------- -# Source files and compiler flags -#------------------------------------------------------------- -# tinyusb makefile -include $(TOP)/src/tinyusb.mk -SRC_C += $(TINYUSB_SRC_C) - -# Include all source C in family & board folder -SRC_C += hw/bsp/board.c -SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c)) - -INC += \ - $(TOP)/$(FAMILY_PATH) \ - $(TOP)/src \ - -BOARD_UPPER = $(call to_upper,$(BOARD)) -CFLAGS += -DBOARD_$(BOARD_UPPER) - -ifdef CFLAGS_CLI - CFLAGS += $(CFLAGS_CLI) -endif - -# use max3421 as host controller -ifeq (${MAX3421_HOST},1) - SRC_C += src/portable/analog/max3421/hcd_max3421.c - CFLAGS += -DCFG_TUH_MAX3421=1 -endif - -# Log level is mapped to TUSB DEBUG option -ifneq ($(LOG),) - CFLAGS += -DCFG_TUSB_DEBUG=$(LOG) -endif - -# Logger: default is uart, can be set to rtt or swo -ifeq ($(LOGGER),rtt) - CFLAGS += -DLOGGER_RTT - #CFLAGS += -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL - INC += $(TOP)/lib/SEGGER_RTT/RTT - SRC_C += lib/SEGGER_RTT/RTT/SEGGER_RTT.c -endif -ifeq ($(LOGGER),swo) - CFLAGS += -DLOGGER_SWO -else - CFLAGS += -DLOGGER_UART -endif - -# CPU specific flags -ifdef CPU_CORE - include ${TOP}/examples/build_system/make/cpu/$(CPU_CORE).mk -endif - -# toolchain specific -include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk - -#---------------------- FreeRTOS ----------------------- -FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) - -ifeq ($(RTOS),freertos) - SRC_C += \ - $(FREERTOS_SRC)/list.c \ - $(FREERTOS_SRC)/queue.c \ - $(FREERTOS_SRC)/tasks.c \ - $(FREERTOS_SRC)/timers.c \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) - - SRC_S += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) - INC += \ - $(TOP)/hw/bsp/$(FAMILY)/FreeRTOSConfig \ - $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_PORTABLE_SRC) - - CFLAGS += -DCFG_TUSB_OS=OPT_OS_FREERTOS - - # Suppress FreeRTOSConfig.h warnings - CFLAGS_GCC += -Wno-error=redundant-decls - - # Suppress FreeRTOS source warnings - CFLAGS_GCC += -Wno-error=cast-qual - - # FreeRTOS (lto + Os) linker issue - LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext -endif - -#---------------- Helper ---------------- -check_defined = \ - $(strip $(foreach 1,$1, \ - $(call __check_defined,$1,$(strip $(value 2))))) -__check_defined = \ - $(if $(value $1),, \ - $(error Undefined make flag: $1$(if $2, ($2)))) diff --git a/examples/device/audio_4_channel_mic/Makefile b/examples/device/audio_4_channel_mic/Makefile index 2c825bbf7..4cf2d9e49 100644 --- a/examples/device/audio_4_channel_mic/Makefile +++ b/examples/device/audio_4_channel_mic/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/audio_4_channel_mic_freertos/Makefile b/examples/device/audio_4_channel_mic_freertos/Makefile index bd625b345..13c637977 100644 --- a/examples/device/audio_4_channel_mic_freertos/Makefile +++ b/examples/device/audio_4_channel_mic_freertos/Makefile @@ -1,5 +1,5 @@ RTOS = freertos -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/audio_test/Makefile b/examples/device/audio_test/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/audio_test/Makefile +++ b/examples/device/audio_test/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/audio_test_freertos/Makefile b/examples/device/audio_test_freertos/Makefile index bd625b345..13c637977 100644 --- a/examples/device/audio_test_freertos/Makefile +++ b/examples/device/audio_test_freertos/Makefile @@ -1,5 +1,5 @@ RTOS = freertos -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/audio_test_multi_rate/Makefile b/examples/device/audio_test_multi_rate/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/audio_test_multi_rate/Makefile +++ b/examples/device/audio_test_multi_rate/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/board_test/Makefile b/examples/device/board_test/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/board_test/Makefile +++ b/examples/device/board_test/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/cdc_dual_ports/Makefile b/examples/device/cdc_dual_ports/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/cdc_dual_ports/Makefile +++ b/examples/device/cdc_dual_ports/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/cdc_msc/Makefile b/examples/device/cdc_msc/Makefile index 0c2e37180..eb548f018 100644 --- a/examples/device/cdc_msc/Makefile +++ b/examples/device/cdc_msc/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 10cff57a0..41960e64c 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -1,5 +1,5 @@ RTOS = freertos -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/cdc_uac2/Makefile b/examples/device/cdc_uac2/Makefile index 21dcdb0b2..539077d6c 100644 --- a/examples/device/cdc_uac2/Makefile +++ b/examples/device/cdc_uac2/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/dfu/Makefile b/examples/device/dfu/Makefile index 52a24cdb0..ad7a37b79 100644 --- a/examples/device/dfu/Makefile +++ b/examples/device/dfu/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/dfu_runtime/Makefile b/examples/device/dfu_runtime/Makefile index 1b4d398cf..72bd56ede 100644 --- a/examples/device/dfu_runtime/Makefile +++ b/examples/device/dfu_runtime/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/dynamic_configuration/Makefile b/examples/device/dynamic_configuration/Makefile index 1b4d398cf..72bd56ede 100644 --- a/examples/device/dynamic_configuration/Makefile +++ b/examples/device/dynamic_configuration/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/hid_boot_interface/Makefile b/examples/device/hid_boot_interface/Makefile index 52a24cdb0..ad7a37b79 100644 --- a/examples/device/hid_boot_interface/Makefile +++ b/examples/device/hid_boot_interface/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/hid_composite/Makefile b/examples/device/hid_composite/Makefile index 1b4d398cf..72bd56ede 100644 --- a/examples/device/hid_composite/Makefile +++ b/examples/device/hid_composite/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index bd625b345..13c637977 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -1,5 +1,5 @@ RTOS = freertos -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/hid_generic_inout/Makefile b/examples/device/hid_generic_inout/Makefile index 1b4d398cf..72bd56ede 100644 --- a/examples/device/hid_generic_inout/Makefile +++ b/examples/device/hid_generic_inout/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/hid_multiple_interface/Makefile b/examples/device/hid_multiple_interface/Makefile index 1b4d398cf..72bd56ede 100644 --- a/examples/device/hid_multiple_interface/Makefile +++ b/examples/device/hid_multiple_interface/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/midi_test/Makefile b/examples/device/midi_test/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/midi_test/Makefile +++ b/examples/device/midi_test/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/midi_test_freertos/Makefile b/examples/device/midi_test_freertos/Makefile index 26cd83486..704d319d2 100644 --- a/examples/device/midi_test_freertos/Makefile +++ b/examples/device/midi_test_freertos/Makefile @@ -1,5 +1,5 @@ RTOS = freertos -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/msc_dual_lun/Makefile b/examples/device/msc_dual_lun/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/msc_dual_lun/Makefile +++ b/examples/device/msc_dual_lun/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/mtp/Makefile b/examples/device/mtp/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/mtp/Makefile +++ b/examples/device/mtp/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile index 4ad110dec..82c946b14 100644 --- a/examples/device/net_lwip_webserver/Makefile +++ b/examples/device/net_lwip_webserver/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk # suppress warning caused by lwip CFLAGS_GCC += \ diff --git a/examples/device/uac2_headset/Makefile b/examples/device/uac2_headset/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/uac2_headset/Makefile +++ b/examples/device/uac2_headset/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/uac2_speaker_fb/Makefile b/examples/device/uac2_speaker_fb/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/uac2_speaker_fb/Makefile +++ b/examples/device/uac2_speaker_fb/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/usbtmc/Makefile b/examples/device/usbtmc/Makefile index 1b4d398cf..72bd56ede 100644 --- a/examples/device/usbtmc/Makefile +++ b/examples/device/usbtmc/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/device/video_capture/Makefile b/examples/device/video_capture/Makefile index d698a848d..288e9ffc3 100644 --- a/examples/device/video_capture/Makefile +++ b/examples/device/video_capture/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk ifeq ($(DISABLE_MJPEG),1) CFLAGS += -DCFG_EXAMPLE_VIDEO_DISABLE_MJPEG diff --git a/examples/device/video_capture_2ch/Makefile b/examples/device/video_capture_2ch/Makefile index d698a848d..288e9ffc3 100644 --- a/examples/device/video_capture_2ch/Makefile +++ b/examples/device/video_capture_2ch/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk ifeq ($(DISABLE_MJPEG),1) CFLAGS += -DCFG_EXAMPLE_VIDEO_DISABLE_MJPEG diff --git a/examples/device/webusb_serial/Makefile b/examples/device/webusb_serial/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/device/webusb_serial/Makefile +++ b/examples/device/webusb_serial/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/dual/host_hid_to_device_cdc/Makefile b/examples/dual/host_hid_to_device_cdc/Makefile index 474ae9814..76c6db0ac 100644 --- a/examples/dual/host_hid_to_device_cdc/Makefile +++ b/examples/dual/host_hid_to_device_cdc/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/dual/host_info_to_device_cdc/Makefile b/examples/dual/host_info_to_device_cdc/Makefile index 083c9169a..071185c88 100644 --- a/examples/dual/host_info_to_device_cdc/Makefile +++ b/examples/dual/host_info_to_device_cdc/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile index 0235e08c3..e6408c77a 100644 --- a/examples/host/bare_api/Makefile +++ b/examples/host/bare_api/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile index 213c02f9c..b6036fa26 100644 --- a/examples/host/cdc_msc_hid/Makefile +++ b/examples/host/cdc_msc_hid/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile index 178341f81..4e8c8b116 100644 --- a/examples/host/cdc_msc_hid_freertos/Makefile +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -1,5 +1,5 @@ RTOS = freertos -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/host/device_info/Makefile b/examples/host/device_info/Makefile index 0235e08c3..e6408c77a 100644 --- a/examples/host/device_info/Makefile +++ b/examples/host/device_info/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/host/hid_controller/Makefile b/examples/host/hid_controller/Makefile index 1377f1f90..f82054e8c 100644 --- a/examples/host/hid_controller/Makefile +++ b/examples/host/hid_controller/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/host/midi_rx/Makefile b/examples/host/midi_rx/Makefile index 0235e08c3..e6408c77a 100644 --- a/examples/host/midi_rx/Makefile +++ b/examples/host/midi_rx/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile index f0872376f..0f87d848d 100644 --- a/examples/host/msc_file_explorer/Makefile +++ b/examples/host/msc_file_explorer/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk FATFS_PATH = lib/fatfs/source diff --git a/examples/typec/power_delivery/Makefile b/examples/typec/power_delivery/Makefile index 7fa475da5..e8cacd359 100644 --- a/examples/typec/power_delivery/Makefile +++ b/examples/typec/power_delivery/Makefile @@ -1,4 +1,4 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ diff --git a/hw/bsp/family_support.mk b/hw/bsp/family_support.mk new file mode 100644 index 000000000..757982b85 --- /dev/null +++ b/hw/bsp/family_support.mk @@ -0,0 +1,187 @@ +# --------------------------------------- +# Common make definition for all examples +# --------------------------------------- + +# upper helper function +to_upper = $(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,$(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,$(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,$(subst x,X,$(subst y,Y,$(subst z,Z,$(subst -,_,$(1)))))))))))))))))))))))))))) + +#------------------------------------------------------------- +# Toolchain +# Can be changed via TOOLCHAIN=gcc|iar or CC=arm-none-eabi-gcc|iccarm|clang +#------------------------------------------------------------- +ifneq (,$(findstring clang,$(CC))) + TOOLCHAIN = clang +else ifneq (,$(findstring iccarm,$(CC))) + TOOLCHAIN = iar +else ifneq (,$(findstring gcc,$(CC))) + TOOLCHAIN = gcc +endif + +# Default to GCC +ifndef TOOLCHAIN + TOOLCHAIN = gcc +endif + +#-------------- TOP and CURRENT_PATH ------------ + +# Set TOP to be the path to get from the current directory (where make was invoked) to the top of the tree. +# $(lastword $(MAKEFILE_LIST)) returns the name of this makefile relative to where make was invoked. +THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) + +# Set TOP to an absolute path +TOP = $(abspath $(subst family_support.mk,../..,$(THIS_MAKEFILE))) + +# Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos +CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) + +#-------------- Linux/Windows ------------ +# Detect whether shell style is windows or not +# https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 +ifeq '$(findstring ;,$(PATH))' ';' +# PATH contains semicolon - so we're definitely on Windows. +CMDEXE := 1 + +# makefile shell commands should use syntax for DOS CMD, not unix sh +# Force DOS command shell on Windows. +SHELL := cmd.exe +endif + +ifeq ($(CMDEXE),1) + CP = copy + RM = del + MKDIR = mkdir + PYTHON = python +else + CP = cp + RM = rm + MKDIR = mkdir + PYTHON = python3 +endif + +# Build directory +BUILD := _build/$(BOARD) + +PROJECT := $(notdir $(CURDIR)) +BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) + +#------------------------------------------------------------- +# Board / Family +#------------------------------------------------------------- + +# Board without family +ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) + BOARD_PATH := hw/bsp/$(BOARD) + FAMILY := +endif + +# Board within family +ifeq ($(BOARD_PATH),) + BOARD_PATH := $(subst $(TOP)/,,$(wildcard $(TOP)/hw/bsp/*/boards/$(BOARD))) + FAMILY := $(word 3, $(subst /, ,$(BOARD_PATH))) + FAMILY_PATH = hw/bsp/$(FAMILY) +endif + +ifeq ($(BOARD_PATH),) + $(info You must provide a BOARD parameter with 'BOARD=') + $(error Invalid BOARD specified) +endif + +ifeq ($(FAMILY),) + include $(TOP)/hw/bsp/$(BOARD)/board.mk +else + # Include Family and Board specific defs + include $(TOP)/$(FAMILY_PATH)/family.mk + SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) +endif + +#------------------------------------------------------------- +# Source files and compiler flags +#------------------------------------------------------------- +# tinyusb makefile +include $(TOP)/src/tinyusb.mk +SRC_C += $(TINYUSB_SRC_C) + +# Include all source C in family & board folder +SRC_C += hw/bsp/board.c +SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c)) + +INC += \ + $(TOP)/$(FAMILY_PATH) \ + $(TOP)/src \ + +BOARD_UPPER = $(call to_upper,$(BOARD)) +CFLAGS += -DBOARD_$(BOARD_UPPER) + +ifdef CFLAGS_CLI + CFLAGS += $(CFLAGS_CLI) +endif + +# use max3421 as host controller +ifeq (${MAX3421_HOST},1) + SRC_C += src/portable/analog/max3421/hcd_max3421.c + CFLAGS += -DCFG_TUH_MAX3421=1 +endif + +# Log level is mapped to TUSB DEBUG option +ifneq ($(LOG),) + CFLAGS += -DCFG_TUSB_DEBUG=$(LOG) +endif + +# Logger: default is uart, can be set to rtt or swo +ifeq ($(LOGGER),rtt) + CFLAGS += -DLOGGER_RTT + #CFLAGS += -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL + INC += $(TOP)/lib/SEGGER_RTT/RTT + SRC_C += lib/SEGGER_RTT/RTT/SEGGER_RTT.c +endif +ifeq ($(LOGGER),swo) + CFLAGS += -DLOGGER_SWO +else + CFLAGS += -DLOGGER_UART +endif + +# CPU specific flags +ifdef CPU_CORE + include ${TOP}/examples/build_system/make/cpu/$(CPU_CORE).mk +endif + +# toolchain specific +include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk + +#---------------------- FreeRTOS ----------------------- +FREERTOS_SRC = lib/FreeRTOS-Kernel +FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) + +ifeq ($(RTOS),freertos) + SRC_C += \ + $(FREERTOS_SRC)/list.c \ + $(FREERTOS_SRC)/queue.c \ + $(FREERTOS_SRC)/tasks.c \ + $(FREERTOS_SRC)/timers.c \ + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) + + SRC_S += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) + INC += \ + $(TOP)/hw/bsp/$(FAMILY)/FreeRTOSConfig \ + $(TOP)/$(FREERTOS_SRC)/include \ + $(TOP)/$(FREERTOS_PORTABLE_SRC) + + CFLAGS += -DCFG_TUSB_OS=OPT_OS_FREERTOS + + # Suppress FreeRTOSConfig.h warnings + CFLAGS_GCC += -Wno-error=redundant-decls + + # Suppress FreeRTOS source warnings + CFLAGS_GCC += -Wno-error=cast-qual + + # FreeRTOS (lto + Os) linker issue + LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext +endif + +#---------------- Helper ---------------- +check_defined = \ + $(strip $(foreach 1,$1, \ + $(call __check_defined,$1,$(strip $(value 2))))) +__check_defined = \ + $(if $(value $1),, \ + $(error Undefined make flag: $1$(if $2, ($2)))) -- cgit v1.3.1 From 47b13f6b102ea981b79588158dca436ebc21f1ae Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 14 Oct 2025 17:13:28 +0700 Subject: improve cmake warning flags, fix various warnings in examples --- examples/build_system/cmake/toolchain/common.cmake | 17 +----- examples/device/cdc_uac2/src/common.h | 3 ++ examples/device/cdc_uac2/src/main.c | 3 -- examples/device/net_lwip_webserver/src/main.c | 3 +- examples/device/usbtmc/src/main.c | 1 + examples/device/usbtmc/src/usbtmc_app.c | 1 + examples/device/video_capture_2ch/src/main.c | 5 +- examples/device/webusb_serial/src/main.c | 2 +- examples/host/cdc_msc_hid/src/app.h | 32 ++++++++++++ examples/host/cdc_msc_hid/src/cdc_app.c | 1 + examples/host/cdc_msc_hid/src/hid_app.c | 1 + examples/host/cdc_msc_hid/src/main.c | 3 +- examples/host/cdc_msc_hid_freertos/src/app.h | 33 ++++++++++++ examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 1 + examples/host/cdc_msc_hid_freertos/src/hid_app.c | 3 +- examples/host/cdc_msc_hid_freertos/src/main.c | 4 +- examples/host/cdc_msc_hid_freertos/src/msc_app.c | 1 + examples/host/hid_controller/src/app.h | 31 +++++++++++ examples/host/hid_controller/src/hid_app.c | 1 + examples/host/hid_controller/src/main.c | 20 ++----- hw/bsp/board.c | 6 ++- hw/bsp/family_support.cmake | 61 ++++++++++++---------- lib/networking/dhserver.c | 4 +- lib/networking/rndis_reports.c | 7 ++- src/class/audio/audio_device.h | 1 + src/class/net/ecm_rndis_device.c | 2 - src/class/net/net_device.h | 7 +++ 27 files changed, 174 insertions(+), 80 deletions(-) create mode 100644 examples/host/cdc_msc_hid/src/app.h create mode 100644 examples/host/cdc_msc_hid_freertos/src/app.h create mode 100644 examples/host/hid_controller/src/app.h diff --git a/examples/build_system/cmake/toolchain/common.cmake b/examples/build_system/cmake/toolchain/common.cmake index 4c181137b..fa3034e6f 100644 --- a/examples/build_system/cmake/toolchain/common.cmake +++ b/examples/build_system/cmake/toolchain/common.cmake @@ -20,11 +20,11 @@ include(${CMAKE_CURRENT_LIST_DIR}/../cpu/${CMAKE_SYSTEM_CPU}.cmake) # ---------------------------------------------------------------------------- # Compile flags # ---------------------------------------------------------------------------- -if (TOOLCHAIN STREQUAL "gcc") +if (TOOLCHAIN STREQUAL "gcc" OR TOOLCHAIN STREQUAL "clang") list(APPEND TOOLCHAIN_COMMON_FLAGS -fdata-sections -ffunction-sections - -fsingle-precision-constant +# -fsingle-precision-constant # not supported by clang -fno-strict-aliasing ) list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS @@ -34,22 +34,9 @@ if (TOOLCHAIN STREQUAL "gcc") ) elseif (TOOLCHAIN STREQUAL "iar") - #list(APPEND TOOLCHAIN_COMMON_FLAGS) list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS --diag_suppress=Li065 ) - -elseif (TOOLCHAIN STREQUAL "clang") - list(APPEND TOOLCHAIN_COMMON_FLAGS - -fdata-sections - -ffunction-sections - -fno-strict-aliasing - ) - list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS - -Wl,--print-memory-usage - -Wl,--gc-sections - -Wl,--cref - ) endif () # join the toolchain flags into a single string diff --git a/examples/device/cdc_uac2/src/common.h b/examples/device/cdc_uac2/src/common.h index f281024c7..ff8b7a953 100644 --- a/examples/device/cdc_uac2/src/common.h +++ b/examples/device/cdc_uac2/src/common.h @@ -31,4 +31,7 @@ enum VOLUME_CTRL_SILENCE = 0x8000, }; +void led_blinking_task(void); +void audio_task(void); + #endif diff --git a/examples/device/cdc_uac2/src/main.c b/examples/device/cdc_uac2/src/main.c index bc87f6e3c..22c462be7 100644 --- a/examples/device/cdc_uac2/src/main.c +++ b/examples/device/cdc_uac2/src/main.c @@ -38,9 +38,6 @@ extern uint32_t blink_interval_ms; #include "pico/stdlib.h" #endif -void led_blinking_task(void); -void audio_task(void); - /*------------- MAIN -------------*/ int main(void) { diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index dd9f213ae..867cf2812 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -58,6 +58,7 @@ try changing the first byte of tud_network_mac_address[] below from 0x02 to 0x00 #include "lwip/ethip6.h" #include "lwip/init.h" #include "lwip/timeouts.h" +#include "lwip/sys.h" #ifdef INCLUDE_IPERF #include "lwip/apps/lwiperf.h" @@ -172,7 +173,7 @@ static void init_lwip(void) { } /* handle any DNS requests from dns-server */ -bool dns_query_proc(const char *name, ip4_addr_t *addr) { +static bool dns_query_proc(const char *name, ip4_addr_t *addr) { if (0 == strcmp(name, "tiny.usb")) { *addr = ipaddr; return true; diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index f78cce91f..5cbbb85ef 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -29,6 +29,7 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "main.h" #include "usbtmc_app.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES diff --git a/examples/device/usbtmc/src/usbtmc_app.c b/examples/device/usbtmc/src/usbtmc_app.c index e738f1008..4c3724ac4 100644 --- a/examples/device/usbtmc/src/usbtmc_app.c +++ b/examples/device/usbtmc/src/usbtmc_app.c @@ -28,6 +28,7 @@ #include "tusb.h" #include "bsp/board_api.h" #include "main.h" +#include "usbtmc_app.h" #if (CFG_TUD_USBTMC_ENABLE_488) static usbtmc_response_capabilities_488_t const diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index f56738f67..a63efa82d 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -180,7 +180,7 @@ static void fill_color_bar(uint8_t* buffer, unsigned start_position) { } #endif -size_t get_framebuf(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, size_t fnum, void **fb) { +static size_t get_framebuf(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, size_t fnum, void **fb) { uint32_t idx = ctl_idx + stm_idx; if (idx == 0) { @@ -205,8 +205,7 @@ size_t get_framebuf(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, size_t fnum, voi //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ - -void video_send_frame(uint_fast8_t ctl_idx, uint_fast8_t stm_idx) { +static void video_send_frame(uint_fast8_t ctl_idx, uint_fast8_t stm_idx) { static unsigned start_ms[CFG_TUD_VIDEO_STREAMING] = {0, }; static unsigned already_sent = 0; diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 4a724f45e..0c2acd94e 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -107,7 +107,7 @@ int main(void) { } // send characters to both CDC and WebUSB -void echo_all(const uint8_t buf[], uint32_t count) { +static void echo_all(const uint8_t buf[], uint32_t count) { // echo to web serial if (web_serial_connected) { tud_vendor_write(buf, count); diff --git a/examples/host/cdc_msc_hid/src/app.h b/examples/host/cdc_msc_hid/src/app.h new file mode 100644 index 000000000..bf15c7bea --- /dev/null +++ b/examples/host/cdc_msc_hid/src/app.h @@ -0,0 +1,32 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef TUSB_TINYUSB_EXAMPLES_APP_H +#define TUSB_TINYUSB_EXAMPLES_APP_H + +void cdc_app_task(void); +void hid_app_task(void); + +#endif diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index 97f1a96d6..d3daedffc 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -26,6 +26,7 @@ #include "tusb.h" #include "bsp/board_api.h" +#include "app.h" static size_t get_console_inputs(uint8_t* buf, size_t bufsize) { size_t count = 0; diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index 6f01d6f45..f6a83aeed 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -25,6 +25,7 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "app.h" //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index e2dd6e5d2..c309a7cae 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -29,13 +29,12 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "app.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ void led_blinking_task(void); -extern void cdc_app_task(void); -extern void hid_app_task(void); /*------------- MAIN -------------*/ int main(void) { diff --git a/examples/host/cdc_msc_hid_freertos/src/app.h b/examples/host/cdc_msc_hid_freertos/src/app.h new file mode 100644 index 000000000..960f7e8cc --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/app.h @@ -0,0 +1,33 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef TUSB_TINYUSB_EXAMPLES_APP_H +#define TUSB_TINYUSB_EXAMPLES_APP_H + +void cdc_app_init(void); +void hid_app_init(void); +void msc_app_init(void); + +#endif diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index d99760a02..279efe7b7 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -26,6 +26,7 @@ #include "tusb.h" #include "bsp/board_api.h" +#include "app.h" #ifdef ESP_PLATFORM #define CDC_STACK_SZIE 2048 diff --git a/examples/host/cdc_msc_hid_freertos/src/hid_app.c b/examples/host/cdc_msc_hid_freertos/src/hid_app.c index 9ea5c1be0..0b4ee2c78 100644 --- a/examples/host/cdc_msc_hid_freertos/src/hid_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/hid_app.c @@ -25,6 +25,7 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "app.h" //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION @@ -160,7 +161,7 @@ static void process_kbd_report(hid_keyboard_report_t const *report) { // Mouse //--------------------------------------------------------------------+ -void cursor_movement(int8_t x, int8_t y, int8_t wheel) { +static void cursor_movement(int8_t x, int8_t y, int8_t wheel) { #if USE_ANSI_ESCAPE // Move X using ansi escape if ( x < 0) { diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index d498c1b57..5dab2bed0 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -29,6 +29,7 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "app.h" #ifdef ESP_PLATFORM #define USBH_STACK_SIZE 4096 @@ -65,9 +66,6 @@ TimerHandle_t blinky_tm; static void led_blinky_cb(TimerHandle_t xTimer); static void usb_host_task(void* param); -extern void cdc_app_init(void); -extern void hid_app_init(void); -extern void msc_app_init(void); /*------------- MAIN -------------*/ int main(void) { diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c index 6439495a8..a6e3ed4ee 100644 --- a/examples/host/cdc_msc_hid_freertos/src/msc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -24,6 +24,7 @@ */ #include "tusb.h" +#include "app.h" // define the buffer to be place in USB/DMA memory with correct alignment/cache line size CFG_TUH_MEM_SECTION static struct { diff --git a/examples/host/hid_controller/src/app.h b/examples/host/hid_controller/src/app.h new file mode 100644 index 000000000..1f9015cd2 --- /dev/null +++ b/examples/host/hid_controller/src/app.h @@ -0,0 +1,31 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef TUSB_TINYUSB_EXAMPLES_APP_H +#define TUSB_TINYUSB_EXAMPLES_APP_H + +void hid_app_task(void); + +#endif diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c index 1d6ca8b07..f8c3d029b 100644 --- a/examples/host/hid_controller/src/hid_app.c +++ b/examples/host/hid_controller/src/hid_app.c @@ -25,6 +25,7 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "app.h" /* From https://www.kernel.org/doc/html/latest/input/gamepad.html ____________________________ __ diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index f3244db95..fa70d7d1a 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -34,18 +34,15 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "app.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ void led_blinking_task(void); -extern void cdc_task(void); -extern void hid_app_task(void); - /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host HID Controller Example\r\n"); @@ -60,19 +57,11 @@ int main(void) board_init_after_tusb(); - while (1) - { + while (1) { // tinyusb host task tuh_task(); led_blinking_task(); - -#if CFG_TUH_CDC - cdc_task(); -#endif - -#if CFG_TUH_HID hid_app_task(); -#endif } } @@ -83,8 +72,7 @@ int main(void) //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; diff --git a/hw/bsp/board.c b/hw/bsp/board.c index e141664da..a51978479 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -180,9 +180,11 @@ uint32_t tusb_time_millis_api(void) { // FreeRTOS hooks //-------------------------------------------------------------------- #if CFG_TUSB_OS == OPT_OS_FREERTOS && !defined(ESP_PLATFORM) + #include "FreeRTOS.h" #include "task.h" +void vApplicationMallocFailedHook(void); // missing prototype void vApplicationMallocFailedHook(void) { taskDISABLE_INTERRUPTS(); TU_ASSERT(false, ); @@ -199,7 +201,7 @@ void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) { /* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is * used by the Idle task. */ -void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) { +void vApplicationGetIdleTaskMemory(StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize) { /* If the buffers to be provided to the Idle task are declared inside this * function then they must be declared static - otherwise they will be allocated on * the stack and so not exists after this function exits. */ @@ -243,6 +245,8 @@ void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, Stack } #if CFG_TUSB_MCU == OPT_MCU_RX63X || CFG_TUSB_MCU == OPT_MCU_RX65X +void vApplicationSetupTimerInterrupt(void); + #include "iodefine.h" void vApplicationSetupTimerInterrupt(void) { /* Enable CMT0 */ diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 9ec80df91..daabed81b 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -38,6 +38,35 @@ if (NOT DEFINED TOOLCHAIN) set(TOOLCHAIN gcc) endif () +set(WARN_FLAGS_GNU + -Wall + -Wextra + -Werror + -Wfatal-errors + -Wdouble-promotion + -Wstrict-prototypes + -Wstrict-overflow + -Werror-implicit-function-declaration + -Wfloat-equal + -Wundef + -Wshadow + -Wwrite-strings + -Wsign-compare + -Wmissing-format-attribute + -Wunreachable-code + -Wcast-align + -Wcast-function-type + -Wcast-qual + -Wnull-dereference + -Wuninitialized + -Wunused + -Wunused-function + -Wreturn-type + -Wredundant-decls + -Wmissing-prototypes + ) +set(WARN_FLAGS_Clang ${WARN_FLAGS_GNU}) + # Optimization if (NOT DEFINED CMAKE_BUILD_TYPE OR CMAKE_BUILD_TYPE STREQUAL "") set(CMAKE_BUILD_TYPE MinSizeRel CACHE STRING "Build type" FORCE) @@ -48,8 +77,8 @@ endif () #------------------------------------------------------------- if (NOT DEFINED FAMILY) if (NOT DEFINED BOARD) - message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, espressif). - You can do this via -DFAMILY=xxx on the cmake command line") + message(FATAL_ERROR "You must set a BOARD variable for the build (e.g. metro_m4_express, raspberry_pi_pico). + You can do this via -DBOARD=xxx on the cmake command line") endif () # Find path contains BOARD @@ -226,33 +255,7 @@ function(family_configure_common TARGET RTOS) endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_compile_options(${TARGET} PRIVATE - -Wall - -Wextra - #-Werror - -Wfatal-errors - -Wdouble-promotion - -Wstrict-prototypes - -Wstrict-overflow - -Werror-implicit-function-declaration - -Wfloat-equal - -Wundef - -Wshadow - -Wwrite-strings - -Wsign-compare - -Wmissing-format-attribute - -Wunreachable-code - -Wcast-align - -Wcast-function-type - -Wcast-qual - -Wnull-dereference - -Wuninitialized - -Wunused - -Wunused-function - -Wreturn-type - -Wredundant-decls - -Wmissing-prototypes - ) + target_compile_options(${TARGET} PRIVATE ${WARN_FLAGS_${CMAKE_C_COMPILER_ID}}) target_link_options(${TARGET} PUBLIC "LINKER:-Map=$.map") if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0 AND NO_WARN_RWX_SEGMENTS_SUPPORTED AND (NOT RTOS STREQUAL zephyr)) diff --git a/lib/networking/dhserver.c b/lib/networking/dhserver.c index 9dedf87e2..87a63c5de 100644 --- a/lib/networking/dhserver.c +++ b/lib/networking/dhserver.c @@ -145,7 +145,7 @@ static __inline void free_entry(dhcp_entry_t *entry) memset(entry->mac, 0, 6); } -uint8_t *find_dhcp_option(uint8_t *attrs, int size, uint8_t attr) +static uint8_t *find_dhcp_option(uint8_t *attrs, int size, uint8_t attr) { int i = 0; while ((i + 1) < size) @@ -159,7 +159,7 @@ uint8_t *find_dhcp_option(uint8_t *attrs, int size, uint8_t attr) return NULL; } -int fill_options(void *dest, +static int fill_options(void *dest, uint8_t msg_type, const char *domain, ip4_addr_t dns, diff --git a/lib/networking/rndis_reports.c b/lib/networking/rndis_reports.c index 451d5405b..e2849fb10 100644 --- a/lib/networking/rndis_reports.c +++ b/lib/networking/rndis_reports.c @@ -29,7 +29,10 @@ #include #include -#include "class/net/net_device.h" +#include "tusb.h" + +#if CFG_TUD_ECM_RNDIS + #include "rndis_protocol.h" #include "netif/ethernet.h" @@ -299,3 +302,5 @@ void rndis_class_set_handler(uint8_t *data, int size) break; } } + +#endif diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index fd47c649d..00948767e 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -360,6 +360,7 @@ bool tud_audio_feedback_format_correction_cb(uint8_t func_id); #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP void tud_audio_int_done_cb(uint8_t rhport); +void tud_audio_int_xfer_cb(uint8_t rhport); #endif // Invoked when audio set interface request received diff --git a/src/class/net/ecm_rndis_device.c b/src/class/net/ecm_rndis_device.c index 299eb97c8..7dff66823 100644 --- a/src/class/net/ecm_rndis_device.c +++ b/src/class/net/ecm_rndis_device.c @@ -35,8 +35,6 @@ #include "net_device.h" #include "rndis_protocol.h" -extern void rndis_class_set_handler(uint8_t *data, int size); /* found in ./misc/networking/rndis_reports.c */ - #define CFG_TUD_NET_PACKET_PREFIX_LEN sizeof(rndis_data_packet_t) #define CFG_TUD_NET_PACKET_SUFFIX_LEN 0 diff --git a/src/class/net/net_device.h b/src/class/net/net_device.h index fff2623b7..ef5ecffc8 100644 --- a/src/class/net/net_device.h +++ b/src/class/net/net_device.h @@ -55,6 +55,13 @@ typedef enum extern "C" { #endif +//--------------------------------------------------------------------+ +// Implemented by Application +//--------------------------------------------------------------------+ +#if CFG_TUD_ECM_RNDIS +extern void rndis_class_set_handler(uint8_t *data, int size); +#endif + //--------------------------------------------------------------------+ // Application API //--------------------------------------------------------------------+ -- cgit v1.3.1 From a5fde08285a10a87a1f374913dfe7edfafbe383d Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 14 Oct 2025 17:18:26 +0700 Subject: refactor same7x using codex --- hw/bsp/same70_qmtech/board.mk | 59 - hw/bsp/same70_qmtech/hpl_pmc_config.h | 1053 ----- hw/bsp/same70_qmtech/hpl_usart_config.h | 215 - hw/bsp/same70_qmtech/hpl_xdmac_config.h | 4400 -------------------- hw/bsp/same70_qmtech/peripheral_clk_config.h | 126 - hw/bsp/same70_qmtech/same70_qmtech.c | 159 - hw/bsp/same70_xplained/board.mk | 67 - hw/bsp/same70_xplained/hpl_pmc_config.h | 1053 ----- hw/bsp/same70_xplained/hpl_usart_config.h | 215 - hw/bsp/same70_xplained/hpl_xdmac_config.h | 4400 -------------------- hw/bsp/same70_xplained/peripheral_clk_config.h | 126 - hw/bsp/same70_xplained/same70_xplained.c | 156 - hw/bsp/same7x/boards/same70_qmtech/board.cmake | 8 + hw/bsp/same7x/boards/same70_qmtech/board.h | 64 + hw/bsp/same7x/boards/same70_qmtech/board.mk | 3 + .../same7x/boards/same70_qmtech/hpl_pmc_config.h | 1053 +++++ .../same7x/boards/same70_qmtech/hpl_usart_config.h | 215 + .../same7x/boards/same70_qmtech/hpl_xdmac_config.h | 4400 ++++++++++++++++++++ .../boards/same70_qmtech/peripheral_clk_config.h | 126 + hw/bsp/same7x/boards/same70_xplained/board.cmake | 8 + hw/bsp/same7x/boards/same70_xplained/board.h | 64 + hw/bsp/same7x/boards/same70_xplained/board.mk | 3 + .../same7x/boards/same70_xplained/hpl_pmc_config.h | 1053 +++++ .../boards/same70_xplained/hpl_usart_config.h | 215 + .../boards/same70_xplained/hpl_xdmac_config.h | 4400 ++++++++++++++++++++ .../boards/same70_xplained/peripheral_clk_config.h | 126 + hw/bsp/same7x/family.c | 196 + hw/bsp/same7x/family.cmake | 121 + hw/bsp/same7x/family.mk | 56 + 29 files changed, 12111 insertions(+), 12029 deletions(-) delete mode 100644 hw/bsp/same70_qmtech/board.mk delete mode 100644 hw/bsp/same70_qmtech/hpl_pmc_config.h delete mode 100644 hw/bsp/same70_qmtech/hpl_usart_config.h delete mode 100644 hw/bsp/same70_qmtech/hpl_xdmac_config.h delete mode 100644 hw/bsp/same70_qmtech/peripheral_clk_config.h delete mode 100644 hw/bsp/same70_qmtech/same70_qmtech.c delete mode 100644 hw/bsp/same70_xplained/board.mk delete mode 100644 hw/bsp/same70_xplained/hpl_pmc_config.h delete mode 100644 hw/bsp/same70_xplained/hpl_usart_config.h delete mode 100644 hw/bsp/same70_xplained/hpl_xdmac_config.h delete mode 100644 hw/bsp/same70_xplained/peripheral_clk_config.h delete mode 100644 hw/bsp/same70_xplained/same70_xplained.c create mode 100644 hw/bsp/same7x/boards/same70_qmtech/board.cmake create mode 100644 hw/bsp/same7x/boards/same70_qmtech/board.h create mode 100644 hw/bsp/same7x/boards/same70_qmtech/board.mk create mode 100644 hw/bsp/same7x/boards/same70_qmtech/hpl_pmc_config.h create mode 100644 hw/bsp/same7x/boards/same70_qmtech/hpl_usart_config.h create mode 100644 hw/bsp/same7x/boards/same70_qmtech/hpl_xdmac_config.h create mode 100644 hw/bsp/same7x/boards/same70_qmtech/peripheral_clk_config.h create mode 100644 hw/bsp/same7x/boards/same70_xplained/board.cmake create mode 100644 hw/bsp/same7x/boards/same70_xplained/board.h create mode 100644 hw/bsp/same7x/boards/same70_xplained/board.mk create mode 100644 hw/bsp/same7x/boards/same70_xplained/hpl_pmc_config.h create mode 100644 hw/bsp/same7x/boards/same70_xplained/hpl_usart_config.h create mode 100644 hw/bsp/same7x/boards/same70_xplained/hpl_xdmac_config.h create mode 100644 hw/bsp/same7x/boards/same70_xplained/peripheral_clk_config.h create mode 100644 hw/bsp/same7x/family.c create mode 100644 hw/bsp/same7x/family.cmake create mode 100644 hw/bsp/same7x/family.mk diff --git a/hw/bsp/same70_qmtech/board.mk b/hw/bsp/same70_qmtech/board.mk deleted file mode 100644 index 7e949e135..000000000 --- a/hw/bsp/same70_qmtech/board.mk +++ /dev/null @@ -1,59 +0,0 @@ -ASF_DIR = hw/mcu/microchip/same70 - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__SAME70N19B__ \ - -DCFG_TUSB_MCU=OPT_MCU_SAMX7X - -# suppress following warnings from mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=redundant-decls - -# SAM driver is flooded with -Wcast-qual which slow down complication significantly -CFLAGS_SKIP += -Wcast-qual - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = $(ASF_DIR)/same70b/gcc/gcc/same70q21b_flash.ld - -SRC_C += \ - src/portable/microchip/samx7x/dcd_samx7x.c \ - $(ASF_DIR)/same70b/gcc/gcc/startup_same70q21b.c \ - $(ASF_DIR)/same70b/gcc/system_same70q21b.c \ - $(ASF_DIR)/hpl/core/hpl_init.c \ - $(ASF_DIR)/hpl/usart/hpl_usart.c \ - $(ASF_DIR)/hpl/pmc/hpl_pmc.c \ - $(ASF_DIR)/hal/src/hal_usart_async.c \ - $(ASF_DIR)/hal/src/hal_io.c \ - $(ASF_DIR)/hal/src/hal_atomic.c \ - $(ASF_DIR)/hal/utils/src/utils_ringbuffer.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(ASF_DIR) \ - $(TOP)/$(ASF_DIR)/config \ - $(TOP)/$(ASF_DIR)/same70b/include \ - $(TOP)/$(ASF_DIR)/hal/include \ - $(TOP)/$(ASF_DIR)/hal/utils/include \ - $(TOP)/$(ASF_DIR)/hpl/core \ - $(TOP)/$(ASF_DIR)/hpl/pio \ - $(TOP)/$(ASF_DIR)/hpl/pmc \ - $(TOP)/$(ASF_DIR)/hri \ - $(TOP)/$(ASF_DIR)/CMSIS/Core/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7 - -# For flash-jlink target -JLINK_DEVICE = SAME70N19B - -# flash using edbg from https://github.com/ataradov/edbg -# Note: SAME70's GPNVM1 must be set to 1 to boot from flash with -# edbg -t same70 -F w0,1,1 -flash: $(BUILD)/$(PROJECT).bin - edbg --verbose -t same70 -pv -f $< diff --git a/hw/bsp/same70_qmtech/hpl_pmc_config.h b/hw/bsp/same70_qmtech/hpl_pmc_config.h deleted file mode 100644 index 387aaa5df..000000000 --- a/hw/bsp/same70_qmtech/hpl_pmc_config.h +++ /dev/null @@ -1,1053 +0,0 @@ -/* Auto-generated config file hpl_pmc_config.h */ -#ifndef HPL_PMC_CONFIG_H -#define HPL_PMC_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include - -#define CLK_SRC_OPTION_OSC32K 0 -#define CLK_SRC_OPTION_XOSC32K 1 -#define CLK_SRC_OPTION_OSC12M 2 -#define CLK_SRC_OPTION_XOSC20M 3 - -#define CLK_SRC_OPTION_SLCK 0 -#define CLK_SRC_OPTION_MAINCK 1 -#define CLK_SRC_OPTION_PLLACK 2 -#define CLK_SRC_OPTION_UPLLCKDIV 3 -#define CLK_SRC_OPTION_MCK 4 - -#define CLK_SRC_OPTION_UPLLCK 3 - -#define CONF_RC_4M 0 -#define CONF_RC_8M 1 -#define CONF_RC_12M 2 - -#define CONF_XOSC32K_NO_BYPASS 0 -#define CONF_XOSC32K_BYPASS 1 - -#define CONF_XOSC20M_NO_BYPASS 0 -#define CONF_XOSC20M_BYPASS 1 - -// Clock_SLCK configuration -// Indicates whether SLCK configuration is enabled or not -// enable_clk_gen_slck -#ifndef CONF_CLK_SLCK_CONFIG -#define CONF_CLK_SLCK_CONFIG 1 -#endif - -// Clock Generator -// clock generator SLCK source - -// 32kHz High Accuracy Internal Oscillator (OSC32K) - -// 32kHz External Crystal Oscillator (XOSC32K) - -// This defines the clock source for SLCK -// clk_gen_slck_oscillator -#ifndef CONF_CLK_GEN_SLCK_SRC -#define CONF_CLK_GEN_SLCK_SRC CLK_SRC_OPTION_OSC32K -#endif - -// Enable Clock_SLCK -// Indicates whether SLCK is enabled or disable -// clk_gen_slck_arch_enable -#ifndef CONF_CLK_SLCK_ENABLE -#define CONF_CLK_SLCK_ENABLE 1 -#endif - -// - -// - -// -// // Clock_MAINCK configuration -// Indicates whether MAINCK configuration is enabled or not -// enable_clk_gen_mainck -#ifndef CONF_CLK_MAINCK_CONFIG -#define CONF_CLK_MAINCK_CONFIG 1 -#endif - -// Clock Generator -// clock generator MAINCK source - -// Embedded 4/8/12MHz RC Oscillator (OSC12M) - -// External 3-20MHz Oscillator (XOSC20M) - -// This defines the clock source for MAINCK -// clk_gen_mainck_oscillator -#ifndef CONF_CLK_GEN_MAINCK_SRC -#define CONF_CLK_GEN_MAINCK_SRC CLK_SRC_OPTION_XOSC20M -#endif - -// Enable Clock_MAINCK -// Indicates whether MAINCK is enabled or disable -// clk_gen_mainck_arch_enable -#ifndef CONF_CLK_MAINCK_ENABLE -#define CONF_CLK_MAINCK_ENABLE 1 -#endif - -// Enable Main Clock Failure Detection -// Indicates whether Main Clock Failure Detection is enabled or disable. -// The 4/8/12 MHz RC oscillator must be selected as the source of MAINCK. -// clk_gen_cfden_enable -#ifndef CONF_CLK_CFDEN_ENABLE -#define CONF_CLK_CFDEN_ENABLE 0 -#endif - -// - -// - -// -// // Clock_MCKR configuration -// Indicates whether MCKR configuration is enabled or not -// enable_clk_gen_mckr -#ifndef CONF_CLK_MCKR_CONFIG -#define CONF_CLK_MCKR_CONFIG 1 -#endif - -// Clock Generator -// clock generator MCKR source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// PLLA Clock (PLLACK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// This defines the clock source for MCKR -// clk_gen_mckr_oscillator -#ifndef CONF_CLK_GEN_MCKR_SRC -#define CONF_CLK_GEN_MCKR_SRC CLK_SRC_OPTION_PLLACK -#endif - -// Enable Clock_MCKR -// Indicates whether MCKR is enabled or disable -// clk_gen_mckr_arch_enable -#ifndef CONF_CLK_MCKR_ENABLE -#define CONF_CLK_MCKR_ENABLE 1 -#endif - -// - -// - -// Master Clock Prescaler -// <0=> 1 -// <1=> 2 -// <2=> 4 -// <3=> 8 -// <4=> 16 -// <5=> 32 -// <6=> 64 -// <7=> 3 -// Select the clock prescaler. -// mckr_presc -#ifndef CONF_MCKR_PRESC -#define CONF_MCKR_PRESC 0 -#endif - -// -// // Clock_MCK configuration -// Indicates whether MCK configuration is enabled or not -// enable_clk_gen_mck -#ifndef CONF_CLK_MCK_CONFIG -#define CONF_CLK_MCK_CONFIG 1 -#endif - -// Clock Generator -// clock generator MCK source - -// Master Clock Controller (PMC_MCKR) - -// This defines the clock source for MCK -// clk_gen_mck_oscillator -#ifndef CONF_CLK_GEN_MCK_SRC -#define CONF_CLK_GEN_MCK_SRC CLK_SRC_OPTION_MCKR -#endif - -// - -// - -// Master Clock Controller Divider MCK divider -// <0=> 1 -// <1=> 2 -// <3=> 3 -// <2=> 4 -// Select the master clock divider. -// mck_div -#ifndef CONF_MCK_DIV -#define CONF_MCK_DIV 1 -#endif - -// -// // Clock_SYSTICK configuration -// Indicates whether SYSTICK configuration is enabled or not -// enable_clk_gen_systick -#ifndef CONF_CLK_SYSTICK_CONFIG -#define CONF_CLK_SYSTICK_CONFIG 1 -#endif - -// Clock Generator -// clock generator SYSTICK source - -// Master Clock Controller (PMC_MCKR) - -// This defines the clock source for SYSTICK -// clk_gen_systick_oscillator -#ifndef CONF_CLK_GEN_SYSTICK_SRC -#define CONF_CLK_GEN_SYSTICK_SRC CLK_SRC_OPTION_MCKR -#endif - -// - -// - -// Systick clock divider -// <8=> 8 -// Select systick clock divider -// systick_clock_div -#ifndef CONF_SYSTICK_DIV -#define CONF_SYSTICK_DIV 8 -#endif - -// -// // Clock_FCLK configuration -// Indicates whether FCLK configuration is enabled or not -// enable_clk_gen_fclk -#ifndef CONF_CLK_FCLK_CONFIG -#define CONF_CLK_FCLK_CONFIG 1 -#endif - -// Clock Generator -// clock generator FCLK source - -// Master Clock Controller (PMC_MCKR) - -// This defines the clock source for FCLK -// clk_gen_fclk_oscillator -#ifndef CONF_CLK_GEN_FCLK_SRC -#define CONF_CLK_GEN_FCLK_SRC CLK_SRC_OPTION_MCKR -#endif - -// - -// - -// -// // Clock_GCLK0 configuration -// Indicates whether GCLK0 configuration is enabled or not -// enable_clk_gen_gclk0 -#ifndef CONF_CLK_GCLK0_CONFIG -#define CONF_CLK_GCLK0_CONFIG 1 -#endif - -// Clock Generator -// clock generator GCLK0 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// USB 480M Clock (UPLLCK) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for GCLK0 -// clk_gen_gclk0_oscillator -#ifndef CONF_CLK_GEN_GCLK0_SRC -#define CONF_CLK_GEN_GCLK0_SRC CLK_SRC_OPTION_MCK -#endif - -// Enable Clock_GCLK0 -// Indicates whether GCLK0 is enabled or disable -// clk_gen_gclk0_arch_enable -#ifndef CONF_CLK_GCLK0_ENABLE -#define CONF_CLK_GCLK0_ENABLE 1 -#endif - -// - -// -// Enable GCLK0 GCLKEN -// Indicates whether GCLK0 GCLKEN is enabled or disable -// gclk0_gclken_enable -#ifndef CONF_GCLK0_GCLKEN_ENABLE -#define CONF_GCLK0_GCLKEN_ENABLE 0 -#endif - -// Generic Clock GCLK0 divider <1-256> -// Select the clock divider (divider = GCLKDIV + 1). -// gclk0_div -#ifndef CONF_GCLK0_DIV -#define CONF_GCLK0_DIV 2 -#endif - -// -// // Clock_GCLK1 configuration -// Indicates whether GCLK1 configuration is enabled or not -// enable_clk_gen_gclk1 -#ifndef CONF_CLK_GCLK1_CONFIG -#define CONF_CLK_GCLK1_CONFIG 1 -#endif - -// Clock Generator -// clock generator GCLK1 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// USB 480M Clock (UPLLCK) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for GCLK1 -// clk_gen_gclk1_oscillator -#ifndef CONF_CLK_GEN_GCLK1_SRC -#define CONF_CLK_GEN_GCLK1_SRC CLK_SRC_OPTION_PLLACK -#endif - -// Enable Clock_GCLK1 -// Indicates whether GCLK1 is enabled or disable -// clk_gen_gclk1_arch_enable -#ifndef CONF_CLK_GCLK1_ENABLE -#define CONF_CLK_GCLK1_ENABLE 1 -#endif - -// - -// -// Enable GCLK1 GCLKEN -// Indicates whether GCLK1 GCLKEN is enabled or disable -// gclk1_gclken_enable -#ifndef CONF_GCLK1_GCLKEN_ENABLE -#define CONF_GCLK1_GCLKEN_ENABLE 0 -#endif - -// Generic Clock GCLK1 divider <1-256> -// Select the clock divider (divider = GCLKDIV + 1). -// gclk1_div -#ifndef CONF_GCLK1_DIV -#define CONF_GCLK1_DIV 3 -#endif - -// -// // Clock_PCK0 configuration -// Indicates whether PCK0 configuration is enabled or not -// enable_clk_gen_pck0 -#ifndef CONF_CLK_PCK0_CONFIG -#define CONF_CLK_PCK0_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK0 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK0 -// clk_gen_pck0_oscillator -#ifndef CONF_CLK_GEN_PCK0_SRC -#define CONF_CLK_GEN_PCK0_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK0 -// Indicates whether PCK0 is enabled or disable -// clk_gen_pck0_arch_enable -#ifndef CONF_CLK_PCK0_ENABLE -#define CONF_CLK_PCK0_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck0_presc -#ifndef CONF_PCK0_PRESC -#define CONF_PCK0_PRESC 1 -#endif - -// -// // Clock_PCK1 configuration -// Indicates whether PCK1 configuration is enabled or not -// enable_clk_gen_pck1 -#ifndef CONF_CLK_PCK1_CONFIG -#define CONF_CLK_PCK1_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK1 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK1 -// clk_gen_pck1_oscillator -#ifndef CONF_CLK_GEN_PCK1_SRC -#define CONF_CLK_GEN_PCK1_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK1 -// Indicates whether PCK1 is enabled or disable -// clk_gen_pck1_arch_enable -#ifndef CONF_CLK_PCK1_ENABLE -#define CONF_CLK_PCK1_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck1_presc -#ifndef CONF_PCK1_PRESC -#define CONF_PCK1_PRESC 2 -#endif - -// -// // Clock_PCK2 configuration -// Indicates whether PCK2 configuration is enabled or not -// enable_clk_gen_pck2 -#ifndef CONF_CLK_PCK2_CONFIG -#define CONF_CLK_PCK2_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK2 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK2 -// clk_gen_pck2_oscillator -#ifndef CONF_CLK_GEN_PCK2_SRC -#define CONF_CLK_GEN_PCK2_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK2 -// Indicates whether PCK2 is enabled or disable -// clk_gen_pck2_arch_enable -#ifndef CONF_CLK_PCK2_ENABLE -#define CONF_CLK_PCK2_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck2_presc -#ifndef CONF_PCK2_PRESC -#define CONF_PCK2_PRESC 3 -#endif - -// -// // Clock_PCK3 configuration -// Indicates whether PCK3 configuration is enabled or not -// enable_clk_gen_pck3 -#ifndef CONF_CLK_PCK3_CONFIG -#define CONF_CLK_PCK3_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK3 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK3 -// clk_gen_pck3_oscillator -#ifndef CONF_CLK_GEN_PCK3_SRC -#define CONF_CLK_GEN_PCK3_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK3 -// Indicates whether PCK3 is enabled or disable -// clk_gen_pck3_arch_enable -#ifndef CONF_CLK_PCK3_ENABLE -#define CONF_CLK_PCK3_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck3_presc -#ifndef CONF_PCK3_PRESC -#define CONF_PCK3_PRESC 4 -#endif - -// -// // Clock_PCK4 configuration -// Indicates whether PCK4 configuration is enabled or not -// enable_clk_gen_pck4 -#ifndef CONF_CLK_PCK4_CONFIG -#define CONF_CLK_PCK4_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK4 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK4 -// clk_gen_pck4_oscillator -#ifndef CONF_CLK_GEN_PCK4_SRC -#define CONF_CLK_GEN_PCK4_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK4 -// Indicates whether PCK4 is enabled or disable -// clk_gen_pck4_arch_enable -#ifndef CONF_CLK_PCK4_ENABLE -#define CONF_CLK_PCK4_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck4_presc -#ifndef CONF_PCK4_PRESC -#define CONF_PCK4_PRESC 5 -#endif - -// -// // Clock_PCK5 configuration -// Indicates whether PCK5 configuration is enabled or not -// enable_clk_gen_pck5 -#ifndef CONF_CLK_PCK5_CONFIG -#define CONF_CLK_PCK5_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK5 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK5 -// clk_gen_pck5_oscillator -#ifndef CONF_CLK_GEN_PCK5_SRC -#define CONF_CLK_GEN_PCK5_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK5 -// Indicates whether PCK5 is enabled or disable -// clk_gen_pck5_arch_enable -#ifndef CONF_CLK_PCK5_ENABLE -#define CONF_CLK_PCK5_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck5_presc -#ifndef CONF_PCK5_PRESC -#define CONF_PCK5_PRESC 6 -#endif - -// -// // Clock_PCK6 configuration -// Indicates whether PCK6 configuration is enabled or not -// enable_clk_gen_pck6 -#ifndef CONF_CLK_PCK6_CONFIG -#define CONF_CLK_PCK6_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK6 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK6 -// clk_gen_pck6_oscillator -#ifndef CONF_CLK_GEN_PCK6_SRC -#define CONF_CLK_GEN_PCK6_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK6 -// Indicates whether PCK6 is enabled or disable -// clk_gen_pck6_arch_enable -#ifndef CONF_CLK_PCK6_ENABLE -#define CONF_CLK_PCK6_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck6_presc -#ifndef CONF_PCK6_PRESC -#define CONF_PCK6_PRESC 7 -#endif - -// -// // Clock_USB_480M configuration -// Indicates whether USB_480M configuration is enabled or not -// enable_clk_gen_usb_480m -#ifndef CONF_CLK_USB_480M_CONFIG -#define CONF_CLK_USB_480M_CONFIG 1 -#endif - -// Clock Generator -// clock generator USB_480M source - -// USB 480M Clock (UPLLCK) - -// This defines the clock source for USB_480M -// clk_gen_usb_480m_oscillator -#ifndef CONF_CLK_GEN_USB_480M_SRC -#define CONF_CLK_GEN_USB_480M_SRC CLK_SRC_OPTION_UPLLCK -#endif - -// - -// - -// -// // Clock_USB_48M configuration -// Indicates whether USB_48M configuration is enabled or not -// enable_clk_gen_usb_48m -#ifndef CONF_CLK_USB_48M_CONFIG -#define CONF_CLK_USB_48M_CONFIG 1 -#endif - -// Clock Generator -// clock generator USB_48M source - -// PLLA Clock (PLLACK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// This defines the clock source for USB_48M -// clk_gen_usb_48m_oscillator -#ifndef CONF_CLK_GEN_USB_48M_SRC -#define CONF_CLK_GEN_USB_48M_SRC CLK_SRC_OPTION_UPLLCKDIV -#endif - -// Enable Clock_USB_48M -// Indicates whether USB_48M is enabled or disable -// clk_gen_usb_48m_arch_enable -#ifndef CONF_CLK_USB_48M_ENABLE -#define CONF_CLK_USB_48M_ENABLE 1 -#endif - -// - -// - -// USB Clock Controller Divider <1-16> -// Select the USB clock divider (divider = USBDIV + 1). -// usb_48m_div -#ifndef CONF_USB_48M_DIV -#define CONF_USB_48M_DIV 5 -#endif - -// -// // Clock_SLCK2 configuration -// Indicates whether SLCK2 configuration is enabled or not -// enable_clk_gen_slck2 -#ifndef CONF_CLK_SLCK2_CONFIG -#define CONF_CLK_SLCK2_CONFIG 1 -#endif - -// Clock Generator -// clock generator SLCK2 source - -// Slow Clock (SLCK) - -// This defines the clock source for SLCK2 -// clk_gen_slck2_oscillator -#ifndef CONF_CLK_GEN_SLCK2_SRC -#define CONF_CLK_GEN_SLCK2_SRC CLK_SRC_OPTION_SLCK -#endif - -// - -// - -// -// - -// System Configuration -// Indicates whether configuration for system is enabled or not -// enable_hclk_clock -#ifndef CONF_SYSTEM_CONFIG -#define CONF_SYSTEM_CONFIG 1 -#endif - -// Processor Clock Settings -// Processor Clock source -// Master Clock Controller (PMC_MCKR) -// This defines the clock source for the HCLK (Processor clock) -// hclk_clock_source -#ifndef CONF_HCLK_SRC -#define CONF_HCLK_SRC MCKR -#endif - -// Flash Wait State -// <0=> 1 cycle -// <1=> 2 cycles -// <2=> 3 cycles -// <3=> 4 cycles -// <4=> 5 cycles -// <5=> 6 cycles -// <6=> 7 cycles -// This field defines the number of wait states for read and write operations. -// efc_fws -#ifndef CONF_EFC_WAIT_STATE -#define CONF_EFC_WAIT_STATE 5 -#endif - -// -// - -// SysTick Clock -// enable_systick_clk_clock -#ifndef CONF_SYSTICK_CLK_CONFIG -#define CONF_SYSTICK_CLK_CONFIG 1 -#endif - -// SysTick Clock source -// Master Clock Controller (PMC_MCKR) -// This defines the clock source for the SysTick Clock -// systick_clk_clock_source -#ifndef CONF_SYSTICK_CLK_SRC -#define CONF_SYSTICK_CLK_SRC MCKR -#endif - -// SysTick Clock Divider -// <8=> 8 -// Fixed to 8 if Systick is not using Processor clock -// systick_clk_clock_div -#ifndef CONF_SYSTICK_CLK_DIV -#define CONF_SYSTICK_CLK_DIV 8 -#endif - -// - -// OSC32K Oscillator Configuration -// Indicates whether configuration for OSC32K is enabled or not -// enable_osc32k -#ifndef CONF_OSC32K_CONFIG -#define CONF_OSC32K_CONFIG 1 -#endif - -// OSC32K Oscillator Control -// OSC32K Oscillator Enable -// Indicates whether OSC32K Oscillator is enabled or not -// osc32k_arch_enable -#ifndef CONF_OSC32K_ENABLE -#define CONF_OSC32K_ENABLE 0 -#endif -// -// - -// XOSC32K Oscillator Configuration -// Indicates whether configuration for XOSC32K is enabled or not -// enable_xosc32k -#ifndef CONF_XOSC32K_CONFIG -#define CONF_XOSC32K_CONFIG 0 -#endif - -// XOSC32K Oscillator Control -// Oscillator Bypass Select -// The 32kHz crystal oscillator is not bypassed. -// The 32kHz crystal oscillator is bypassed. -// Indicates whether XOSC32K is bypassed. -// xosc32k_bypass -#ifndef CONF_XOSC32K -#define CONF_XOSC32K CONF_XOSC32K_NO_BYPASS -#endif - -// XOSC32K Oscillator Enable -// Indicates whether XOSC32K Oscillator is enabled or not -// xosc32k_arch_enable -#ifndef CONF_XOSC32K_ENABLE -#define CONF_XOSC32K_ENABLE 0 -#endif -// -// - -// OSC12M Oscillator Configuration -// Indicates whether configuration for OSC12M is enabled or not -// enable_osc12m -#ifndef CONF_OSC12M_CONFIG -#define CONF_OSC12M_CONFIG 0 -#endif - -// OSC12M Oscillator Control -// OSC12M Oscillator Enable -// Indicates whether OSC12M Oscillator is enabled or not. -// osc12m_arch_enable -#ifndef CONF_OSC12M_ENABLE -#define CONF_OSC12M_ENABLE 0 -#endif - -// OSC12M selector -// <0=> 4000000 -// <1=> 8000000 -// <2=> 12000000 -// Select the frequency of embedded fast RC oscillator. -// osc12m_selector -#ifndef CONF_OSC12M_SELECTOR -#define CONF_OSC12M_SELECTOR 2 -#endif -// -// - -// XOSC20M Oscillator Configuration -// Indicates whether configuration for XOSC20M is enabled or not. -// enable_xosc20m -#ifndef CONF_XOSC20M_CONFIG -#define CONF_XOSC20M_CONFIG 1 -#endif - -// XOSC20M Oscillator Control -// XOSC20M selector <3000000-20000000> -// Select the frequency of crystal or ceramic resonator oscillator. -// xosc20m_selector -#ifndef CONF_XOSC20M_SELECTOR -#define CONF_XOSC20M_SELECTOR 12000000 -#endif - -// Start up time for the external oscillator (ms): <0-256> -// Select start-up time. -// xosc20m_startup_time -#ifndef CONF_XOSC20M_STARTUP_TIME -#define CONF_XOSC20M_STARTUP_TIME 62 -#endif - -// Oscillator Bypass Select -// The external crystal oscillator is not bypassed. -// The external crystal oscillator is bypassed. -// Indicates whether XOSC20M is bypassed. -// xosc20m_bypass -#ifndef CONF_XOSC20M -#define CONF_XOSC20M CONF_XOSC20M_NO_BYPASS -#endif - -// XOSC20M Oscillator Enable -// Indicates whether XOSC20M Oscillator is enabled or not -// xosc20m_arch_enable -#ifndef CONF_XOSC20M_ENABLE -#define CONF_XOSC20M_ENABLE 1 -#endif -// -// - -// PLLACK Oscillator Configuration -// Indicates whether configuration for PLLACK is enabled or not -// enable_pllack -#ifndef CONF_PLLACK_CONFIG -#define CONF_PLLACK_CONFIG 1 -#endif - -// PLLACK Reference Clock Source -// Main Clock (MAINCK) -// Select the clock source. -// pllack_ref_clock -#ifndef CONF_PLLACK_CLK -#define CONF_PLLACK_CLK MAINCK -#endif - -// PLLACK Oscillator Control -// PLLACK Oscillator Enable -// Indicates whether PLLACK Oscillator is enabled or not -// pllack_arch_enable -#ifndef CONF_PLLACK_ENABLE -#define CONF_PLLACK_ENABLE 1 -#endif - -// PLLA Frontend Divider (DIVA) <1-255> -// Select the clock divider -// pllack_div -#ifndef CONF_PLLACK_DIV -#define CONF_PLLACK_DIV 1 -#endif - -// PLLACK Muliplier <1-62> -// Indicates PLLA multiplier (multiplier = MULA + 1). -// pllack_mul -#ifndef CONF_PLLACK_MUL -#define CONF_PLLACK_MUL 25 -#endif -// -// - -// UPLLCK Oscillator Configuration -// Indicates whether configuration for UPLLCK is enabled or not -// enable_upllck -#ifndef CONF_UPLLCK_CONFIG -#define CONF_UPLLCK_CONFIG 1 -#endif - -// UPLLCK Reference Clock Source -// External 3-20MHz Oscillator (XOSC20M) -// Select the clock source,only when the input frequency is 12M or 16M, the upllck output is 480M. -// upllck_ref_clock -#ifndef CONF_UPLLCK_CLK -#define CONF_UPLLCK_CLK XOSC20M -#endif - -// UPLLCK Oscillator Control -// UPLLCK Oscillator Enable -// Indicates whether UPLLCK Oscillator is enabled or not -// upllck_arch_enable -#ifndef CONF_UPLLCK_ENABLE -#define CONF_UPLLCK_ENABLE 1 -#endif -// -// - -// UPLLCKDIV Oscillator Configuration -// Indicates whether configuration for UPLLCKDIV is enabled or not -// enable_upllckdiv -#ifndef CONF_UPLLCKDIV_CONFIG -#define CONF_UPLLCKDIV_CONFIG 1 -#endif - -// UPLLCKDIV Reference Clock Source -// USB 480M Clock (UPLLCK) -// Select the clock source. -// upllckdiv_ref_clock -#ifndef CONF_UPLLCKDIV_CLK -#define CONF_UPLLCKDIV_CLK UPLLCK -#endif - -// UPLLCKDIV Oscillator Control -// UPLLCKDIV Clock Divider -// <0=> 1 -// <1=> 2 -// Select the clock divider. -// upllckdiv_div -#ifndef CONF_UPLLCKDIV_DIV -#define CONF_UPLLCKDIV_DIV 1 -#endif -// -// - -// MCK/8 -// enable_mck_div_8 -#ifndef CONF_MCK_DIV_8_CONFIG -#define CONF_MCK_DIV_8_CONFIG 0 -#endif - -// MCK/8 Source -// <0=> Master Clock (MCK) -// mck_div_8_src -#ifndef CONF_MCK_DIV_8_SRC -#define CONF_MCK_DIV_8_SRC 0 -#endif -// - -// External Clock Input Configuration -// enable_dummy_ext -#ifndef CONF_DUMMY_EXT_CONFIG -#define CONF_DUMMY_EXT_CONFIG 1 -#endif - -// External Clock Input Source -// All here are dummy values -// Refer to the peripherals settings for actual input information -// <0=> Specific clock input from specific pin -// dummy_ext_src -#ifndef CONF_DUMMY_EXT_SRC -#define CONF_DUMMY_EXT_SRC 0 -#endif -// - -// External Clock Configuration -// enable_dummy_ext_clk -#ifndef CONF_DUMMY_EXT_CLK_CONFIG -#define CONF_DUMMY_EXT_CLK_CONFIG 1 -#endif - -// External Clock Source -// All here are dummy values -// Refer to the peripherals settings for actual input information -// <0=> External Clock Input -// dummy_ext_clk_src -#ifndef CONF_DUMMY_EXT_CLK_SRC -#define CONF_DUMMY_EXT_CLK_SRC 0 -#endif -// - -// <<< end of configuration section >>> - -#endif // HPL_PMC_CONFIG_H diff --git a/hw/bsp/same70_qmtech/hpl_usart_config.h b/hw/bsp/same70_qmtech/hpl_usart_config.h deleted file mode 100644 index 50ca3f15c..000000000 --- a/hw/bsp/same70_qmtech/hpl_usart_config.h +++ /dev/null @@ -1,215 +0,0 @@ -/* Auto-generated config file hpl_usart_config.h */ -#ifndef HPL_USART_CONFIG_H -#define HPL_USART_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include - -#ifndef CONF_USART_1_ENABLE -#define CONF_USART_1_ENABLE 1 -#endif - -// Basic Configuration - -// Frame parity -// <0x0=>Even parity -// <0x1=>Odd parity -// <0x2=>Parity forced to 0 -// <0x3=>Parity forced to 1 -// <0x4=>No parity -// Parity bit mode for USART frame -// usart_parity -#ifndef CONF_USART_1_PARITY -#define CONF_USART_1_PARITY 0x4 -#endif - -// Character Size -// <0x0=>5 bits -// <0x1=>6 bits -// <0x2=>7 bits -// <0x3=>8 bits -// Data character size in USART frame -// usart_character_size -#ifndef CONF_USART_1_CHSIZE -#define CONF_USART_1_CHSIZE 0x3 -#endif - -// Stop Bit -// <0=>1 stop bit -// <1=>1.5 stop bits -// <2=>2 stop bits -// Number of stop bits in USART frame -// usart_stop_bit -#ifndef CONF_USART_1_SBMODE -#define CONF_USART_1_SBMODE 0 -#endif - -// Clock Output Select -// <0=>The USART does not drive the SCK pin -// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK -// Clock Output Select in USART sck, if in usrt master mode, please drive SCK. -// usart_clock_output_select -#ifndef CONF_USART_1_CLKO -#define CONF_USART_1_CLKO 0 -#endif - -// Baud rate <1-3000000> -// USART baud rate setting -// usart_baud_rate -#ifndef CONF_USART_1_BAUD -#define CONF_USART_1_BAUD 9600 -#endif - -// - -// Advanced configuration -// usart_advanced -#ifndef CONF_USART_1_ADVANCED_CONFIG -#define CONF_USART_1_ADVANCED_CONFIG 0 -#endif - -// Channel Mode -// <0=>Normal Mode -// <1=>Automatic Echo -// <2=>Local Loopback -// <3=>Remote Loopback -// Channel mode in USART frame -// usart_channel_mode -#ifndef CONF_USART_1_CHMODE -#define CONF_USART_1_CHMODE 0 -#endif - -// 9 bits character enable -// Enable 9 bits character, this has high priority than 5/6/7/8 bits. -// usart_9bits_enable -#ifndef CONF_USART_1_MODE9 -#define CONF_USART_1_MODE9 0 -#endif - -// Variable Sync -// <0=>User defined configuration -// <1=>sync field is updated when a character is written into US_THR -// Variable Synchronization of Command/Data Sync Start Frarm Delimiter -// variable_sync -#ifndef CONF_USART_1_VAR_SYNC -#define CONF_USART_1_VAR_SYNC 0 -#endif - -// Oversampling Mode -// <0=>16 Oversampling -// <1=>8 Oversampling -// Oversampling Mode in UART mode -// usart__oversampling_mode -#ifndef CONF_USART_1_OVER -#define CONF_USART_1_OVER 0 -#endif - -// Inhibit Non Ack -// <0=>The NACK is generated -// <1=>The NACK is not generated -// Inhibit Non Acknowledge -// usart__inack -#ifndef CONF_USART_1_INACK -#define CONF_USART_1_INACK 1 -#endif - -// Disable Successive NACK -// <0=>NACK is sent on the ISO line as soon as a parity error occurs -// <1=>Many parity errors generate a NACK on the ISO line -// Disable Successive NACK -// usart_dsnack -#ifndef CONF_USART_1_DSNACK -#define CONF_USART_1_DSNACK 0 -#endif - -// Inverted Data -// <0=>Data isn't inverted, nomal mode -// <1=>Data is inverted -// Inverted Data -// usart_invdata -#ifndef CONF_USART_1_INVDATA -#define CONF_USART_1_INVDATA 0 -#endif - -// Maximum Number of Automatic Iteration <0-7> -// Defines the maximum number of iterations in mode ISO7816, protocol T = 0. -// usart_max_iteration -#ifndef CONF_USART_1_MAX_ITERATION -#define CONF_USART_1_MAX_ITERATION 0 -#endif - -// Receive Line Filter enable -// whether the USART filters the receive line using a three-sample filter -// usart_receive_filter_enable -#ifndef CONF_USART_1_FILTER -#define CONF_USART_1_FILTER 0 -#endif - -// Manchester Encoder/Decoder Enable -// whether the USART Manchester Encoder/Decoder -// usart_manchester_filter_enable -#ifndef CONF_USART_1_MAN -#define CONF_USART_1_MAN 0 -#endif - -// Manchester Synchronization Mode -// <0=>The Manchester start bit is a 0 to 1 transition -// <1=>The Manchester start bit is a 1 to 0 transition -// Manchester Synchronization Mode -// usart_manchester_synchronization_mode -#ifndef CONF_USART_1_MODSYNC -#define CONF_USART_1_MODSYNC 0 -#endif - -// Start Frame Delimiter Selector -// <0=>Start frame delimiter is COMMAND or DATA SYNC -// <1=>Start frame delimiter is one bit -// Start Frame Delimiter Selector -// usart_start_frame_delimiter -#ifndef CONF_USART_1_ONEBIT -#define CONF_USART_1_ONEBIT 0 -#endif - -// Fractional Part <0-7> -// Fractional part of the baud rate if baud rate generator is in fractional mode -// usart_arch_fractional -#ifndef CONF_USART_1_FRACTIONAL -#define CONF_USART_1_FRACTIONAL 0x0 -#endif - -// Data Order -// <0=>LSB is transmitted first -// <1=>MSB is transmitted first -// Data order of the data bits in the frame -// usart_arch_msbf -#ifndef CONF_USART_1_MSBF -#define CONF_USART_1_MSBF 0 -#endif - -// - -#define CONF_USART_1_MODE 0x0 - -// Calculate BAUD register value in UART mode -#if CONF_USART1_CK_SRC < 3 -#ifndef CONF_USART_1_BAUD_CD -#define CONF_USART_1_BAUD_CD ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / 8 / (2 - CONF_USART_1_OVER)) -#endif -#ifndef CONF_USART_1_BAUD_FP -#define CONF_USART_1_BAUD_FP \ - ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / (2 - CONF_USART_1_OVER) - 8 * CONF_USART_1_BAUD_CD) -#endif -#elif CONF_USART1_CK_SRC == 3 -// No division is active. The value written in US_BRGR has no effect. -#ifndef CONF_USART_1_BAUD_CD -#define CONF_USART_1_BAUD_CD 1 -#endif -#ifndef CONF_USART_1_BAUD_FP -#define CONF_USART_1_BAUD_FP 1 -#endif -#endif - -// <<< end of configuration section >>> - -#endif // HPL_USART_CONFIG_H diff --git a/hw/bsp/same70_qmtech/hpl_xdmac_config.h b/hw/bsp/same70_qmtech/hpl_xdmac_config.h deleted file mode 100644 index a3d62c6fc..000000000 --- a/hw/bsp/same70_qmtech/hpl_xdmac_config.h +++ /dev/null @@ -1,4400 +0,0 @@ -/* Auto-generated config file hpl_xdmac_config.h */ -#ifndef HPL_XDMAC_CONFIG_H -#define HPL_XDMAC_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -// XDMAC enable -// Indicates whether xdmac is enabled or not -// xdmac_enable -#ifndef CONF_DMA_ENABLE -#define CONF_DMA_ENABLE 0 -#endif - -// Channel 0 settings -// dmac_channel_0_settings -#ifndef CONF_DMAC_CHANNEL_0_SETTINGS -#define CONF_DMAC_CHANNEL_0_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_0 -#ifndef CONF_DMAC_BURSTSIZE_0 -#define CONF_DMAC_BURSTSIZE_0 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_0 -#ifndef CONF_DMAC_CHUNKSIZE_0 -#define CONF_DMAC_CHUNKSIZE_0 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_0 -#ifndef CONF_DMAC_BEATSIZE_0 -#define CONF_DMAC_BEATSIZE_0 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_0 -#ifndef CONF_DMAC_SRC_INTERFACE_0 -#define CONF_DMAC_SRC_INTERFACE_0 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_0 -#ifndef CONF_DMAC_DES_INTERFACE_0 -#define CONF_DMAC_DES_INTERFACE_0 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_0 -#ifndef CONF_DMAC_SRCINC_0 -#define CONF_DMAC_SRCINC_0 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_0 -#ifndef CONF_DMAC_DSTINC_0 -#define CONF_DMAC_DSTINC_0 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_0 -#ifndef CONF_DMAC_TRANS_TYPE_0 -#define CONF_DMAC_TRANS_TYPE_0 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_0 -#ifndef CONF_DMAC_TRIGSRC_0 -#define CONF_DMAC_TRIGSRC_0 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_0 == 0 -#define CONF_DMAC_TYPE_0 0 -#define CONF_DMAC_DSYNC_0 0 -#elif CONF_DMAC_TRANS_TYPE_0 == 1 -#define CONF_DMAC_TYPE_0 1 -#define CONF_DMAC_DSYNC_0 0 -#elif CONF_DMAC_TRANS_TYPE_0 == 2 -#define CONF_DMAC_TYPE_0 1 -#define CONF_DMAC_DSYNC_0 1 -#endif - -#if CONF_DMAC_TRIGSRC_0 == 0xFF -#define CONF_DMAC_SWREQ_0 1 -#else -#define CONF_DMAC_SWREQ_0 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_0_SETTINGS == 1 && CONF_DMAC_BEATSIZE_0 != 2 && ((!CONF_DMAC_SRCINC_0) || (!CONF_DMAC_DSTINC_0))) -#if (!CONF_DMAC_SRCINC_0) -#define CONF_DMAC_SRC_STRIDE_0 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_0) -#define CONF_DMAC_DES_STRIDE_0 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_0 -#define CONF_DMAC_SRC_STRIDE_0 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_0 -#define CONF_DMAC_DES_STRIDE_0 0 -#endif - -// Channel 1 settings -// dmac_channel_1_settings -#ifndef CONF_DMAC_CHANNEL_1_SETTINGS -#define CONF_DMAC_CHANNEL_1_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_1 -#ifndef CONF_DMAC_BURSTSIZE_1 -#define CONF_DMAC_BURSTSIZE_1 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_1 -#ifndef CONF_DMAC_CHUNKSIZE_1 -#define CONF_DMAC_CHUNKSIZE_1 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_1 -#ifndef CONF_DMAC_BEATSIZE_1 -#define CONF_DMAC_BEATSIZE_1 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_1 -#ifndef CONF_DMAC_SRC_INTERFACE_1 -#define CONF_DMAC_SRC_INTERFACE_1 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_1 -#ifndef CONF_DMAC_DES_INTERFACE_1 -#define CONF_DMAC_DES_INTERFACE_1 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_1 -#ifndef CONF_DMAC_SRCINC_1 -#define CONF_DMAC_SRCINC_1 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_1 -#ifndef CONF_DMAC_DSTINC_1 -#define CONF_DMAC_DSTINC_1 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_1 -#ifndef CONF_DMAC_TRANS_TYPE_1 -#define CONF_DMAC_TRANS_TYPE_1 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_1 -#ifndef CONF_DMAC_TRIGSRC_1 -#define CONF_DMAC_TRIGSRC_1 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_1 == 0 -#define CONF_DMAC_TYPE_1 0 -#define CONF_DMAC_DSYNC_1 0 -#elif CONF_DMAC_TRANS_TYPE_1 == 1 -#define CONF_DMAC_TYPE_1 1 -#define CONF_DMAC_DSYNC_1 0 -#elif CONF_DMAC_TRANS_TYPE_1 == 2 -#define CONF_DMAC_TYPE_1 1 -#define CONF_DMAC_DSYNC_1 1 -#endif - -#if CONF_DMAC_TRIGSRC_1 == 0xFF -#define CONF_DMAC_SWREQ_1 1 -#else -#define CONF_DMAC_SWREQ_1 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_1_SETTINGS == 1 && CONF_DMAC_BEATSIZE_1 != 2 && ((!CONF_DMAC_SRCINC_1) || (!CONF_DMAC_DSTINC_1))) -#if (!CONF_DMAC_SRCINC_1) -#define CONF_DMAC_SRC_STRIDE_1 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_1) -#define CONF_DMAC_DES_STRIDE_1 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_1 -#define CONF_DMAC_SRC_STRIDE_1 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_1 -#define CONF_DMAC_DES_STRIDE_1 0 -#endif - -// Channel 2 settings -// dmac_channel_2_settings -#ifndef CONF_DMAC_CHANNEL_2_SETTINGS -#define CONF_DMAC_CHANNEL_2_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_2 -#ifndef CONF_DMAC_BURSTSIZE_2 -#define CONF_DMAC_BURSTSIZE_2 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_2 -#ifndef CONF_DMAC_CHUNKSIZE_2 -#define CONF_DMAC_CHUNKSIZE_2 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_2 -#ifndef CONF_DMAC_BEATSIZE_2 -#define CONF_DMAC_BEATSIZE_2 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_2 -#ifndef CONF_DMAC_SRC_INTERFACE_2 -#define CONF_DMAC_SRC_INTERFACE_2 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_2 -#ifndef CONF_DMAC_DES_INTERFACE_2 -#define CONF_DMAC_DES_INTERFACE_2 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_2 -#ifndef CONF_DMAC_SRCINC_2 -#define CONF_DMAC_SRCINC_2 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_2 -#ifndef CONF_DMAC_DSTINC_2 -#define CONF_DMAC_DSTINC_2 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_2 -#ifndef CONF_DMAC_TRANS_TYPE_2 -#define CONF_DMAC_TRANS_TYPE_2 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_2 -#ifndef CONF_DMAC_TRIGSRC_2 -#define CONF_DMAC_TRIGSRC_2 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_2 == 0 -#define CONF_DMAC_TYPE_2 0 -#define CONF_DMAC_DSYNC_2 0 -#elif CONF_DMAC_TRANS_TYPE_2 == 1 -#define CONF_DMAC_TYPE_2 1 -#define CONF_DMAC_DSYNC_2 0 -#elif CONF_DMAC_TRANS_TYPE_2 == 2 -#define CONF_DMAC_TYPE_2 1 -#define CONF_DMAC_DSYNC_2 1 -#endif - -#if CONF_DMAC_TRIGSRC_2 == 0xFF -#define CONF_DMAC_SWREQ_2 1 -#else -#define CONF_DMAC_SWREQ_2 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_2_SETTINGS == 1 && CONF_DMAC_BEATSIZE_2 != 2 && ((!CONF_DMAC_SRCINC_2) || (!CONF_DMAC_DSTINC_2))) -#if (!CONF_DMAC_SRCINC_2) -#define CONF_DMAC_SRC_STRIDE_2 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_2) -#define CONF_DMAC_DES_STRIDE_2 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_2 -#define CONF_DMAC_SRC_STRIDE_2 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_2 -#define CONF_DMAC_DES_STRIDE_2 0 -#endif - -// Channel 3 settings -// dmac_channel_3_settings -#ifndef CONF_DMAC_CHANNEL_3_SETTINGS -#define CONF_DMAC_CHANNEL_3_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_3 -#ifndef CONF_DMAC_BURSTSIZE_3 -#define CONF_DMAC_BURSTSIZE_3 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_3 -#ifndef CONF_DMAC_CHUNKSIZE_3 -#define CONF_DMAC_CHUNKSIZE_3 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_3 -#ifndef CONF_DMAC_BEATSIZE_3 -#define CONF_DMAC_BEATSIZE_3 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_3 -#ifndef CONF_DMAC_SRC_INTERFACE_3 -#define CONF_DMAC_SRC_INTERFACE_3 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_3 -#ifndef CONF_DMAC_DES_INTERFACE_3 -#define CONF_DMAC_DES_INTERFACE_3 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_3 -#ifndef CONF_DMAC_SRCINC_3 -#define CONF_DMAC_SRCINC_3 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_3 -#ifndef CONF_DMAC_DSTINC_3 -#define CONF_DMAC_DSTINC_3 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_3 -#ifndef CONF_DMAC_TRANS_TYPE_3 -#define CONF_DMAC_TRANS_TYPE_3 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_3 -#ifndef CONF_DMAC_TRIGSRC_3 -#define CONF_DMAC_TRIGSRC_3 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_3 == 0 -#define CONF_DMAC_TYPE_3 0 -#define CONF_DMAC_DSYNC_3 0 -#elif CONF_DMAC_TRANS_TYPE_3 == 1 -#define CONF_DMAC_TYPE_3 1 -#define CONF_DMAC_DSYNC_3 0 -#elif CONF_DMAC_TRANS_TYPE_3 == 2 -#define CONF_DMAC_TYPE_3 1 -#define CONF_DMAC_DSYNC_3 1 -#endif - -#if CONF_DMAC_TRIGSRC_3 == 0xFF -#define CONF_DMAC_SWREQ_3 1 -#else -#define CONF_DMAC_SWREQ_3 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_3_SETTINGS == 1 && CONF_DMAC_BEATSIZE_3 != 2 && ((!CONF_DMAC_SRCINC_3) || (!CONF_DMAC_DSTINC_3))) -#if (!CONF_DMAC_SRCINC_3) -#define CONF_DMAC_SRC_STRIDE_3 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_3) -#define CONF_DMAC_DES_STRIDE_3 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_3 -#define CONF_DMAC_SRC_STRIDE_3 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_3 -#define CONF_DMAC_DES_STRIDE_3 0 -#endif - -// Channel 4 settings -// dmac_channel_4_settings -#ifndef CONF_DMAC_CHANNEL_4_SETTINGS -#define CONF_DMAC_CHANNEL_4_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_4 -#ifndef CONF_DMAC_BURSTSIZE_4 -#define CONF_DMAC_BURSTSIZE_4 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_4 -#ifndef CONF_DMAC_CHUNKSIZE_4 -#define CONF_DMAC_CHUNKSIZE_4 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_4 -#ifndef CONF_DMAC_BEATSIZE_4 -#define CONF_DMAC_BEATSIZE_4 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_4 -#ifndef CONF_DMAC_SRC_INTERFACE_4 -#define CONF_DMAC_SRC_INTERFACE_4 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_4 -#ifndef CONF_DMAC_DES_INTERFACE_4 -#define CONF_DMAC_DES_INTERFACE_4 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_4 -#ifndef CONF_DMAC_SRCINC_4 -#define CONF_DMAC_SRCINC_4 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_4 -#ifndef CONF_DMAC_DSTINC_4 -#define CONF_DMAC_DSTINC_4 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_4 -#ifndef CONF_DMAC_TRANS_TYPE_4 -#define CONF_DMAC_TRANS_TYPE_4 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_4 -#ifndef CONF_DMAC_TRIGSRC_4 -#define CONF_DMAC_TRIGSRC_4 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_4 == 0 -#define CONF_DMAC_TYPE_4 0 -#define CONF_DMAC_DSYNC_4 0 -#elif CONF_DMAC_TRANS_TYPE_4 == 1 -#define CONF_DMAC_TYPE_4 1 -#define CONF_DMAC_DSYNC_4 0 -#elif CONF_DMAC_TRANS_TYPE_4 == 2 -#define CONF_DMAC_TYPE_4 1 -#define CONF_DMAC_DSYNC_4 1 -#endif - -#if CONF_DMAC_TRIGSRC_4 == 0xFF -#define CONF_DMAC_SWREQ_4 1 -#else -#define CONF_DMAC_SWREQ_4 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_4_SETTINGS == 1 && CONF_DMAC_BEATSIZE_4 != 2 && ((!CONF_DMAC_SRCINC_4) || (!CONF_DMAC_DSTINC_4))) -#if (!CONF_DMAC_SRCINC_4) -#define CONF_DMAC_SRC_STRIDE_4 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_4) -#define CONF_DMAC_DES_STRIDE_4 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_4 -#define CONF_DMAC_SRC_STRIDE_4 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_4 -#define CONF_DMAC_DES_STRIDE_4 0 -#endif - -// Channel 5 settings -// dmac_channel_5_settings -#ifndef CONF_DMAC_CHANNEL_5_SETTINGS -#define CONF_DMAC_CHANNEL_5_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_5 -#ifndef CONF_DMAC_BURSTSIZE_5 -#define CONF_DMAC_BURSTSIZE_5 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_5 -#ifndef CONF_DMAC_CHUNKSIZE_5 -#define CONF_DMAC_CHUNKSIZE_5 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_5 -#ifndef CONF_DMAC_BEATSIZE_5 -#define CONF_DMAC_BEATSIZE_5 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_5 -#ifndef CONF_DMAC_SRC_INTERFACE_5 -#define CONF_DMAC_SRC_INTERFACE_5 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_5 -#ifndef CONF_DMAC_DES_INTERFACE_5 -#define CONF_DMAC_DES_INTERFACE_5 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_5 -#ifndef CONF_DMAC_SRCINC_5 -#define CONF_DMAC_SRCINC_5 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_5 -#ifndef CONF_DMAC_DSTINC_5 -#define CONF_DMAC_DSTINC_5 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_5 -#ifndef CONF_DMAC_TRANS_TYPE_5 -#define CONF_DMAC_TRANS_TYPE_5 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_5 -#ifndef CONF_DMAC_TRIGSRC_5 -#define CONF_DMAC_TRIGSRC_5 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_5 == 0 -#define CONF_DMAC_TYPE_5 0 -#define CONF_DMAC_DSYNC_5 0 -#elif CONF_DMAC_TRANS_TYPE_5 == 1 -#define CONF_DMAC_TYPE_5 1 -#define CONF_DMAC_DSYNC_5 0 -#elif CONF_DMAC_TRANS_TYPE_5 == 2 -#define CONF_DMAC_TYPE_5 1 -#define CONF_DMAC_DSYNC_5 1 -#endif - -#if CONF_DMAC_TRIGSRC_5 == 0xFF -#define CONF_DMAC_SWREQ_5 1 -#else -#define CONF_DMAC_SWREQ_5 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_5_SETTINGS == 1 && CONF_DMAC_BEATSIZE_5 != 2 && ((!CONF_DMAC_SRCINC_5) || (!CONF_DMAC_DSTINC_5))) -#if (!CONF_DMAC_SRCINC_5) -#define CONF_DMAC_SRC_STRIDE_5 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_5) -#define CONF_DMAC_DES_STRIDE_5 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_5 -#define CONF_DMAC_SRC_STRIDE_5 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_5 -#define CONF_DMAC_DES_STRIDE_5 0 -#endif - -// Channel 6 settings -// dmac_channel_6_settings -#ifndef CONF_DMAC_CHANNEL_6_SETTINGS -#define CONF_DMAC_CHANNEL_6_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_6 -#ifndef CONF_DMAC_BURSTSIZE_6 -#define CONF_DMAC_BURSTSIZE_6 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_6 -#ifndef CONF_DMAC_CHUNKSIZE_6 -#define CONF_DMAC_CHUNKSIZE_6 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_6 -#ifndef CONF_DMAC_BEATSIZE_6 -#define CONF_DMAC_BEATSIZE_6 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_6 -#ifndef CONF_DMAC_SRC_INTERFACE_6 -#define CONF_DMAC_SRC_INTERFACE_6 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_6 -#ifndef CONF_DMAC_DES_INTERFACE_6 -#define CONF_DMAC_DES_INTERFACE_6 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_6 -#ifndef CONF_DMAC_SRCINC_6 -#define CONF_DMAC_SRCINC_6 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_6 -#ifndef CONF_DMAC_DSTINC_6 -#define CONF_DMAC_DSTINC_6 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_6 -#ifndef CONF_DMAC_TRANS_TYPE_6 -#define CONF_DMAC_TRANS_TYPE_6 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_6 -#ifndef CONF_DMAC_TRIGSRC_6 -#define CONF_DMAC_TRIGSRC_6 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_6 == 0 -#define CONF_DMAC_TYPE_6 0 -#define CONF_DMAC_DSYNC_6 0 -#elif CONF_DMAC_TRANS_TYPE_6 == 1 -#define CONF_DMAC_TYPE_6 1 -#define CONF_DMAC_DSYNC_6 0 -#elif CONF_DMAC_TRANS_TYPE_6 == 2 -#define CONF_DMAC_TYPE_6 1 -#define CONF_DMAC_DSYNC_6 1 -#endif - -#if CONF_DMAC_TRIGSRC_6 == 0xFF -#define CONF_DMAC_SWREQ_6 1 -#else -#define CONF_DMAC_SWREQ_6 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_6_SETTINGS == 1 && CONF_DMAC_BEATSIZE_6 != 2 && ((!CONF_DMAC_SRCINC_6) || (!CONF_DMAC_DSTINC_6))) -#if (!CONF_DMAC_SRCINC_6) -#define CONF_DMAC_SRC_STRIDE_6 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_6) -#define CONF_DMAC_DES_STRIDE_6 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_6 -#define CONF_DMAC_SRC_STRIDE_6 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_6 -#define CONF_DMAC_DES_STRIDE_6 0 -#endif - -// Channel 7 settings -// dmac_channel_7_settings -#ifndef CONF_DMAC_CHANNEL_7_SETTINGS -#define CONF_DMAC_CHANNEL_7_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_7 -#ifndef CONF_DMAC_BURSTSIZE_7 -#define CONF_DMAC_BURSTSIZE_7 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_7 -#ifndef CONF_DMAC_CHUNKSIZE_7 -#define CONF_DMAC_CHUNKSIZE_7 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_7 -#ifndef CONF_DMAC_BEATSIZE_7 -#define CONF_DMAC_BEATSIZE_7 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_7 -#ifndef CONF_DMAC_SRC_INTERFACE_7 -#define CONF_DMAC_SRC_INTERFACE_7 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_7 -#ifndef CONF_DMAC_DES_INTERFACE_7 -#define CONF_DMAC_DES_INTERFACE_7 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_7 -#ifndef CONF_DMAC_SRCINC_7 -#define CONF_DMAC_SRCINC_7 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_7 -#ifndef CONF_DMAC_DSTINC_7 -#define CONF_DMAC_DSTINC_7 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_7 -#ifndef CONF_DMAC_TRANS_TYPE_7 -#define CONF_DMAC_TRANS_TYPE_7 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_7 -#ifndef CONF_DMAC_TRIGSRC_7 -#define CONF_DMAC_TRIGSRC_7 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_7 == 0 -#define CONF_DMAC_TYPE_7 0 -#define CONF_DMAC_DSYNC_7 0 -#elif CONF_DMAC_TRANS_TYPE_7 == 1 -#define CONF_DMAC_TYPE_7 1 -#define CONF_DMAC_DSYNC_7 0 -#elif CONF_DMAC_TRANS_TYPE_7 == 2 -#define CONF_DMAC_TYPE_7 1 -#define CONF_DMAC_DSYNC_7 1 -#endif - -#if CONF_DMAC_TRIGSRC_7 == 0xFF -#define CONF_DMAC_SWREQ_7 1 -#else -#define CONF_DMAC_SWREQ_7 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_7_SETTINGS == 1 && CONF_DMAC_BEATSIZE_7 != 2 && ((!CONF_DMAC_SRCINC_7) || (!CONF_DMAC_DSTINC_7))) -#if (!CONF_DMAC_SRCINC_7) -#define CONF_DMAC_SRC_STRIDE_7 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_7) -#define CONF_DMAC_DES_STRIDE_7 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_7 -#define CONF_DMAC_SRC_STRIDE_7 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_7 -#define CONF_DMAC_DES_STRIDE_7 0 -#endif - -// Channel 8 settings -// dmac_channel_8_settings -#ifndef CONF_DMAC_CHANNEL_8_SETTINGS -#define CONF_DMAC_CHANNEL_8_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_8 -#ifndef CONF_DMAC_BURSTSIZE_8 -#define CONF_DMAC_BURSTSIZE_8 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_8 -#ifndef CONF_DMAC_CHUNKSIZE_8 -#define CONF_DMAC_CHUNKSIZE_8 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_8 -#ifndef CONF_DMAC_BEATSIZE_8 -#define CONF_DMAC_BEATSIZE_8 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_8 -#ifndef CONF_DMAC_SRC_INTERFACE_8 -#define CONF_DMAC_SRC_INTERFACE_8 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_8 -#ifndef CONF_DMAC_DES_INTERFACE_8 -#define CONF_DMAC_DES_INTERFACE_8 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_8 -#ifndef CONF_DMAC_SRCINC_8 -#define CONF_DMAC_SRCINC_8 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_8 -#ifndef CONF_DMAC_DSTINC_8 -#define CONF_DMAC_DSTINC_8 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_8 -#ifndef CONF_DMAC_TRANS_TYPE_8 -#define CONF_DMAC_TRANS_TYPE_8 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_8 -#ifndef CONF_DMAC_TRIGSRC_8 -#define CONF_DMAC_TRIGSRC_8 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_8 == 0 -#define CONF_DMAC_TYPE_8 0 -#define CONF_DMAC_DSYNC_8 0 -#elif CONF_DMAC_TRANS_TYPE_8 == 1 -#define CONF_DMAC_TYPE_8 1 -#define CONF_DMAC_DSYNC_8 0 -#elif CONF_DMAC_TRANS_TYPE_8 == 2 -#define CONF_DMAC_TYPE_8 1 -#define CONF_DMAC_DSYNC_8 1 -#endif - -#if CONF_DMAC_TRIGSRC_8 == 0xFF -#define CONF_DMAC_SWREQ_8 1 -#else -#define CONF_DMAC_SWREQ_8 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_8_SETTINGS == 1 && CONF_DMAC_BEATSIZE_8 != 2 && ((!CONF_DMAC_SRCINC_8) || (!CONF_DMAC_DSTINC_8))) -#if (!CONF_DMAC_SRCINC_8) -#define CONF_DMAC_SRC_STRIDE_8 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_8) -#define CONF_DMAC_DES_STRIDE_8 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_8 -#define CONF_DMAC_SRC_STRIDE_8 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_8 -#define CONF_DMAC_DES_STRIDE_8 0 -#endif - -// Channel 9 settings -// dmac_channel_9_settings -#ifndef CONF_DMAC_CHANNEL_9_SETTINGS -#define CONF_DMAC_CHANNEL_9_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_9 -#ifndef CONF_DMAC_BURSTSIZE_9 -#define CONF_DMAC_BURSTSIZE_9 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_9 -#ifndef CONF_DMAC_CHUNKSIZE_9 -#define CONF_DMAC_CHUNKSIZE_9 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_9 -#ifndef CONF_DMAC_BEATSIZE_9 -#define CONF_DMAC_BEATSIZE_9 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_9 -#ifndef CONF_DMAC_SRC_INTERFACE_9 -#define CONF_DMAC_SRC_INTERFACE_9 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_9 -#ifndef CONF_DMAC_DES_INTERFACE_9 -#define CONF_DMAC_DES_INTERFACE_9 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_9 -#ifndef CONF_DMAC_SRCINC_9 -#define CONF_DMAC_SRCINC_9 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_9 -#ifndef CONF_DMAC_DSTINC_9 -#define CONF_DMAC_DSTINC_9 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_9 -#ifndef CONF_DMAC_TRANS_TYPE_9 -#define CONF_DMAC_TRANS_TYPE_9 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_9 -#ifndef CONF_DMAC_TRIGSRC_9 -#define CONF_DMAC_TRIGSRC_9 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_9 == 0 -#define CONF_DMAC_TYPE_9 0 -#define CONF_DMAC_DSYNC_9 0 -#elif CONF_DMAC_TRANS_TYPE_9 == 1 -#define CONF_DMAC_TYPE_9 1 -#define CONF_DMAC_DSYNC_9 0 -#elif CONF_DMAC_TRANS_TYPE_9 == 2 -#define CONF_DMAC_TYPE_9 1 -#define CONF_DMAC_DSYNC_9 1 -#endif - -#if CONF_DMAC_TRIGSRC_9 == 0xFF -#define CONF_DMAC_SWREQ_9 1 -#else -#define CONF_DMAC_SWREQ_9 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_9_SETTINGS == 1 && CONF_DMAC_BEATSIZE_9 != 2 && ((!CONF_DMAC_SRCINC_9) || (!CONF_DMAC_DSTINC_9))) -#if (!CONF_DMAC_SRCINC_9) -#define CONF_DMAC_SRC_STRIDE_9 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_9) -#define CONF_DMAC_DES_STRIDE_9 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_9 -#define CONF_DMAC_SRC_STRIDE_9 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_9 -#define CONF_DMAC_DES_STRIDE_9 0 -#endif - -// Channel 10 settings -// dmac_channel_10_settings -#ifndef CONF_DMAC_CHANNEL_10_SETTINGS -#define CONF_DMAC_CHANNEL_10_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_10 -#ifndef CONF_DMAC_BURSTSIZE_10 -#define CONF_DMAC_BURSTSIZE_10 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_10 -#ifndef CONF_DMAC_CHUNKSIZE_10 -#define CONF_DMAC_CHUNKSIZE_10 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_10 -#ifndef CONF_DMAC_BEATSIZE_10 -#define CONF_DMAC_BEATSIZE_10 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_10 -#ifndef CONF_DMAC_SRC_INTERFACE_10 -#define CONF_DMAC_SRC_INTERFACE_10 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_10 -#ifndef CONF_DMAC_DES_INTERFACE_10 -#define CONF_DMAC_DES_INTERFACE_10 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_10 -#ifndef CONF_DMAC_SRCINC_10 -#define CONF_DMAC_SRCINC_10 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_10 -#ifndef CONF_DMAC_DSTINC_10 -#define CONF_DMAC_DSTINC_10 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_10 -#ifndef CONF_DMAC_TRANS_TYPE_10 -#define CONF_DMAC_TRANS_TYPE_10 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_10 -#ifndef CONF_DMAC_TRIGSRC_10 -#define CONF_DMAC_TRIGSRC_10 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_10 == 0 -#define CONF_DMAC_TYPE_10 0 -#define CONF_DMAC_DSYNC_10 0 -#elif CONF_DMAC_TRANS_TYPE_10 == 1 -#define CONF_DMAC_TYPE_10 1 -#define CONF_DMAC_DSYNC_10 0 -#elif CONF_DMAC_TRANS_TYPE_10 == 2 -#define CONF_DMAC_TYPE_10 1 -#define CONF_DMAC_DSYNC_10 1 -#endif - -#if CONF_DMAC_TRIGSRC_10 == 0xFF -#define CONF_DMAC_SWREQ_10 1 -#else -#define CONF_DMAC_SWREQ_10 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_10_SETTINGS == 1 && CONF_DMAC_BEATSIZE_10 != 2 \ - && ((!CONF_DMAC_SRCINC_10) || (!CONF_DMAC_DSTINC_10))) -#if (!CONF_DMAC_SRCINC_10) -#define CONF_DMAC_SRC_STRIDE_10 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_10) -#define CONF_DMAC_DES_STRIDE_10 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_10 -#define CONF_DMAC_SRC_STRIDE_10 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_10 -#define CONF_DMAC_DES_STRIDE_10 0 -#endif - -// Channel 11 settings -// dmac_channel_11_settings -#ifndef CONF_DMAC_CHANNEL_11_SETTINGS -#define CONF_DMAC_CHANNEL_11_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_11 -#ifndef CONF_DMAC_BURSTSIZE_11 -#define CONF_DMAC_BURSTSIZE_11 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_11 -#ifndef CONF_DMAC_CHUNKSIZE_11 -#define CONF_DMAC_CHUNKSIZE_11 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_11 -#ifndef CONF_DMAC_BEATSIZE_11 -#define CONF_DMAC_BEATSIZE_11 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_11 -#ifndef CONF_DMAC_SRC_INTERFACE_11 -#define CONF_DMAC_SRC_INTERFACE_11 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_11 -#ifndef CONF_DMAC_DES_INTERFACE_11 -#define CONF_DMAC_DES_INTERFACE_11 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_11 -#ifndef CONF_DMAC_SRCINC_11 -#define CONF_DMAC_SRCINC_11 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_11 -#ifndef CONF_DMAC_DSTINC_11 -#define CONF_DMAC_DSTINC_11 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_11 -#ifndef CONF_DMAC_TRANS_TYPE_11 -#define CONF_DMAC_TRANS_TYPE_11 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_11 -#ifndef CONF_DMAC_TRIGSRC_11 -#define CONF_DMAC_TRIGSRC_11 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_11 == 0 -#define CONF_DMAC_TYPE_11 0 -#define CONF_DMAC_DSYNC_11 0 -#elif CONF_DMAC_TRANS_TYPE_11 == 1 -#define CONF_DMAC_TYPE_11 1 -#define CONF_DMAC_DSYNC_11 0 -#elif CONF_DMAC_TRANS_TYPE_11 == 2 -#define CONF_DMAC_TYPE_11 1 -#define CONF_DMAC_DSYNC_11 1 -#endif - -#if CONF_DMAC_TRIGSRC_11 == 0xFF -#define CONF_DMAC_SWREQ_11 1 -#else -#define CONF_DMAC_SWREQ_11 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_11_SETTINGS == 1 && CONF_DMAC_BEATSIZE_11 != 2 \ - && ((!CONF_DMAC_SRCINC_11) || (!CONF_DMAC_DSTINC_11))) -#if (!CONF_DMAC_SRCINC_11) -#define CONF_DMAC_SRC_STRIDE_11 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_11) -#define CONF_DMAC_DES_STRIDE_11 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_11 -#define CONF_DMAC_SRC_STRIDE_11 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_11 -#define CONF_DMAC_DES_STRIDE_11 0 -#endif - -// Channel 12 settings -// dmac_channel_12_settings -#ifndef CONF_DMAC_CHANNEL_12_SETTINGS -#define CONF_DMAC_CHANNEL_12_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_12 -#ifndef CONF_DMAC_BURSTSIZE_12 -#define CONF_DMAC_BURSTSIZE_12 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_12 -#ifndef CONF_DMAC_CHUNKSIZE_12 -#define CONF_DMAC_CHUNKSIZE_12 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_12 -#ifndef CONF_DMAC_BEATSIZE_12 -#define CONF_DMAC_BEATSIZE_12 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_12 -#ifndef CONF_DMAC_SRC_INTERFACE_12 -#define CONF_DMAC_SRC_INTERFACE_12 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_12 -#ifndef CONF_DMAC_DES_INTERFACE_12 -#define CONF_DMAC_DES_INTERFACE_12 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_12 -#ifndef CONF_DMAC_SRCINC_12 -#define CONF_DMAC_SRCINC_12 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_12 -#ifndef CONF_DMAC_DSTINC_12 -#define CONF_DMAC_DSTINC_12 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_12 -#ifndef CONF_DMAC_TRANS_TYPE_12 -#define CONF_DMAC_TRANS_TYPE_12 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_12 -#ifndef CONF_DMAC_TRIGSRC_12 -#define CONF_DMAC_TRIGSRC_12 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_12 == 0 -#define CONF_DMAC_TYPE_12 0 -#define CONF_DMAC_DSYNC_12 0 -#elif CONF_DMAC_TRANS_TYPE_12 == 1 -#define CONF_DMAC_TYPE_12 1 -#define CONF_DMAC_DSYNC_12 0 -#elif CONF_DMAC_TRANS_TYPE_12 == 2 -#define CONF_DMAC_TYPE_12 1 -#define CONF_DMAC_DSYNC_12 1 -#endif - -#if CONF_DMAC_TRIGSRC_12 == 0xFF -#define CONF_DMAC_SWREQ_12 1 -#else -#define CONF_DMAC_SWREQ_12 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_12_SETTINGS == 1 && CONF_DMAC_BEATSIZE_12 != 2 \ - && ((!CONF_DMAC_SRCINC_12) || (!CONF_DMAC_DSTINC_12))) -#if (!CONF_DMAC_SRCINC_12) -#define CONF_DMAC_SRC_STRIDE_12 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_12) -#define CONF_DMAC_DES_STRIDE_12 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_12 -#define CONF_DMAC_SRC_STRIDE_12 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_12 -#define CONF_DMAC_DES_STRIDE_12 0 -#endif - -// Channel 13 settings -// dmac_channel_13_settings -#ifndef CONF_DMAC_CHANNEL_13_SETTINGS -#define CONF_DMAC_CHANNEL_13_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_13 -#ifndef CONF_DMAC_BURSTSIZE_13 -#define CONF_DMAC_BURSTSIZE_13 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_13 -#ifndef CONF_DMAC_CHUNKSIZE_13 -#define CONF_DMAC_CHUNKSIZE_13 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_13 -#ifndef CONF_DMAC_BEATSIZE_13 -#define CONF_DMAC_BEATSIZE_13 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_13 -#ifndef CONF_DMAC_SRC_INTERFACE_13 -#define CONF_DMAC_SRC_INTERFACE_13 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_13 -#ifndef CONF_DMAC_DES_INTERFACE_13 -#define CONF_DMAC_DES_INTERFACE_13 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_13 -#ifndef CONF_DMAC_SRCINC_13 -#define CONF_DMAC_SRCINC_13 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_13 -#ifndef CONF_DMAC_DSTINC_13 -#define CONF_DMAC_DSTINC_13 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_13 -#ifndef CONF_DMAC_TRANS_TYPE_13 -#define CONF_DMAC_TRANS_TYPE_13 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_13 -#ifndef CONF_DMAC_TRIGSRC_13 -#define CONF_DMAC_TRIGSRC_13 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_13 == 0 -#define CONF_DMAC_TYPE_13 0 -#define CONF_DMAC_DSYNC_13 0 -#elif CONF_DMAC_TRANS_TYPE_13 == 1 -#define CONF_DMAC_TYPE_13 1 -#define CONF_DMAC_DSYNC_13 0 -#elif CONF_DMAC_TRANS_TYPE_13 == 2 -#define CONF_DMAC_TYPE_13 1 -#define CONF_DMAC_DSYNC_13 1 -#endif - -#if CONF_DMAC_TRIGSRC_13 == 0xFF -#define CONF_DMAC_SWREQ_13 1 -#else -#define CONF_DMAC_SWREQ_13 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_13_SETTINGS == 1 && CONF_DMAC_BEATSIZE_13 != 2 \ - && ((!CONF_DMAC_SRCINC_13) || (!CONF_DMAC_DSTINC_13))) -#if (!CONF_DMAC_SRCINC_13) -#define CONF_DMAC_SRC_STRIDE_13 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_13) -#define CONF_DMAC_DES_STRIDE_13 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_13 -#define CONF_DMAC_SRC_STRIDE_13 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_13 -#define CONF_DMAC_DES_STRIDE_13 0 -#endif - -// Channel 14 settings -// dmac_channel_14_settings -#ifndef CONF_DMAC_CHANNEL_14_SETTINGS -#define CONF_DMAC_CHANNEL_14_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_14 -#ifndef CONF_DMAC_BURSTSIZE_14 -#define CONF_DMAC_BURSTSIZE_14 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_14 -#ifndef CONF_DMAC_CHUNKSIZE_14 -#define CONF_DMAC_CHUNKSIZE_14 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_14 -#ifndef CONF_DMAC_BEATSIZE_14 -#define CONF_DMAC_BEATSIZE_14 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_14 -#ifndef CONF_DMAC_SRC_INTERFACE_14 -#define CONF_DMAC_SRC_INTERFACE_14 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_14 -#ifndef CONF_DMAC_DES_INTERFACE_14 -#define CONF_DMAC_DES_INTERFACE_14 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_14 -#ifndef CONF_DMAC_SRCINC_14 -#define CONF_DMAC_SRCINC_14 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_14 -#ifndef CONF_DMAC_DSTINC_14 -#define CONF_DMAC_DSTINC_14 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_14 -#ifndef CONF_DMAC_TRANS_TYPE_14 -#define CONF_DMAC_TRANS_TYPE_14 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_14 -#ifndef CONF_DMAC_TRIGSRC_14 -#define CONF_DMAC_TRIGSRC_14 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_14 == 0 -#define CONF_DMAC_TYPE_14 0 -#define CONF_DMAC_DSYNC_14 0 -#elif CONF_DMAC_TRANS_TYPE_14 == 1 -#define CONF_DMAC_TYPE_14 1 -#define CONF_DMAC_DSYNC_14 0 -#elif CONF_DMAC_TRANS_TYPE_14 == 2 -#define CONF_DMAC_TYPE_14 1 -#define CONF_DMAC_DSYNC_14 1 -#endif - -#if CONF_DMAC_TRIGSRC_14 == 0xFF -#define CONF_DMAC_SWREQ_14 1 -#else -#define CONF_DMAC_SWREQ_14 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_14_SETTINGS == 1 && CONF_DMAC_BEATSIZE_14 != 2 \ - && ((!CONF_DMAC_SRCINC_14) || (!CONF_DMAC_DSTINC_14))) -#if (!CONF_DMAC_SRCINC_14) -#define CONF_DMAC_SRC_STRIDE_14 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_14) -#define CONF_DMAC_DES_STRIDE_14 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_14 -#define CONF_DMAC_SRC_STRIDE_14 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_14 -#define CONF_DMAC_DES_STRIDE_14 0 -#endif - -// Channel 15 settings -// dmac_channel_15_settings -#ifndef CONF_DMAC_CHANNEL_15_SETTINGS -#define CONF_DMAC_CHANNEL_15_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_15 -#ifndef CONF_DMAC_BURSTSIZE_15 -#define CONF_DMAC_BURSTSIZE_15 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_15 -#ifndef CONF_DMAC_CHUNKSIZE_15 -#define CONF_DMAC_CHUNKSIZE_15 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_15 -#ifndef CONF_DMAC_BEATSIZE_15 -#define CONF_DMAC_BEATSIZE_15 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_15 -#ifndef CONF_DMAC_SRC_INTERFACE_15 -#define CONF_DMAC_SRC_INTERFACE_15 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_15 -#ifndef CONF_DMAC_DES_INTERFACE_15 -#define CONF_DMAC_DES_INTERFACE_15 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_15 -#ifndef CONF_DMAC_SRCINC_15 -#define CONF_DMAC_SRCINC_15 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_15 -#ifndef CONF_DMAC_DSTINC_15 -#define CONF_DMAC_DSTINC_15 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_15 -#ifndef CONF_DMAC_TRANS_TYPE_15 -#define CONF_DMAC_TRANS_TYPE_15 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_15 -#ifndef CONF_DMAC_TRIGSRC_15 -#define CONF_DMAC_TRIGSRC_15 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_15 == 0 -#define CONF_DMAC_TYPE_15 0 -#define CONF_DMAC_DSYNC_15 0 -#elif CONF_DMAC_TRANS_TYPE_15 == 1 -#define CONF_DMAC_TYPE_15 1 -#define CONF_DMAC_DSYNC_15 0 -#elif CONF_DMAC_TRANS_TYPE_15 == 2 -#define CONF_DMAC_TYPE_15 1 -#define CONF_DMAC_DSYNC_15 1 -#endif - -#if CONF_DMAC_TRIGSRC_15 == 0xFF -#define CONF_DMAC_SWREQ_15 1 -#else -#define CONF_DMAC_SWREQ_15 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_15_SETTINGS == 1 && CONF_DMAC_BEATSIZE_15 != 2 \ - && ((!CONF_DMAC_SRCINC_15) || (!CONF_DMAC_DSTINC_15))) -#if (!CONF_DMAC_SRCINC_15) -#define CONF_DMAC_SRC_STRIDE_15 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_15) -#define CONF_DMAC_DES_STRIDE_15 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_15 -#define CONF_DMAC_SRC_STRIDE_15 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_15 -#define CONF_DMAC_DES_STRIDE_15 0 -#endif - -// Channel 16 settings -// dmac_channel_16_settings -#ifndef CONF_DMAC_CHANNEL_16_SETTINGS -#define CONF_DMAC_CHANNEL_16_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_16 -#ifndef CONF_DMAC_BURSTSIZE_16 -#define CONF_DMAC_BURSTSIZE_16 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_16 -#ifndef CONF_DMAC_CHUNKSIZE_16 -#define CONF_DMAC_CHUNKSIZE_16 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_16 -#ifndef CONF_DMAC_BEATSIZE_16 -#define CONF_DMAC_BEATSIZE_16 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_16 -#ifndef CONF_DMAC_SRC_INTERFACE_16 -#define CONF_DMAC_SRC_INTERFACE_16 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_16 -#ifndef CONF_DMAC_DES_INTERFACE_16 -#define CONF_DMAC_DES_INTERFACE_16 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_16 -#ifndef CONF_DMAC_SRCINC_16 -#define CONF_DMAC_SRCINC_16 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_16 -#ifndef CONF_DMAC_DSTINC_16 -#define CONF_DMAC_DSTINC_16 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_16 -#ifndef CONF_DMAC_TRANS_TYPE_16 -#define CONF_DMAC_TRANS_TYPE_16 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_16 -#ifndef CONF_DMAC_TRIGSRC_16 -#define CONF_DMAC_TRIGSRC_16 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_16 == 0 -#define CONF_DMAC_TYPE_16 0 -#define CONF_DMAC_DSYNC_16 0 -#elif CONF_DMAC_TRANS_TYPE_16 == 1 -#define CONF_DMAC_TYPE_16 1 -#define CONF_DMAC_DSYNC_16 0 -#elif CONF_DMAC_TRANS_TYPE_16 == 2 -#define CONF_DMAC_TYPE_16 1 -#define CONF_DMAC_DSYNC_16 1 -#endif - -#if CONF_DMAC_TRIGSRC_16 == 0xFF -#define CONF_DMAC_SWREQ_16 1 -#else -#define CONF_DMAC_SWREQ_16 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_16_SETTINGS == 1 && CONF_DMAC_BEATSIZE_16 != 2 \ - && ((!CONF_DMAC_SRCINC_16) || (!CONF_DMAC_DSTINC_16))) -#if (!CONF_DMAC_SRCINC_16) -#define CONF_DMAC_SRC_STRIDE_16 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_16) -#define CONF_DMAC_DES_STRIDE_16 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_16 -#define CONF_DMAC_SRC_STRIDE_16 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_16 -#define CONF_DMAC_DES_STRIDE_16 0 -#endif - -// Channel 17 settings -// dmac_channel_17_settings -#ifndef CONF_DMAC_CHANNEL_17_SETTINGS -#define CONF_DMAC_CHANNEL_17_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_17 -#ifndef CONF_DMAC_BURSTSIZE_17 -#define CONF_DMAC_BURSTSIZE_17 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_17 -#ifndef CONF_DMAC_CHUNKSIZE_17 -#define CONF_DMAC_CHUNKSIZE_17 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_17 -#ifndef CONF_DMAC_BEATSIZE_17 -#define CONF_DMAC_BEATSIZE_17 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_17 -#ifndef CONF_DMAC_SRC_INTERFACE_17 -#define CONF_DMAC_SRC_INTERFACE_17 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_17 -#ifndef CONF_DMAC_DES_INTERFACE_17 -#define CONF_DMAC_DES_INTERFACE_17 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_17 -#ifndef CONF_DMAC_SRCINC_17 -#define CONF_DMAC_SRCINC_17 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_17 -#ifndef CONF_DMAC_DSTINC_17 -#define CONF_DMAC_DSTINC_17 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_17 -#ifndef CONF_DMAC_TRANS_TYPE_17 -#define CONF_DMAC_TRANS_TYPE_17 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_17 -#ifndef CONF_DMAC_TRIGSRC_17 -#define CONF_DMAC_TRIGSRC_17 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_17 == 0 -#define CONF_DMAC_TYPE_17 0 -#define CONF_DMAC_DSYNC_17 0 -#elif CONF_DMAC_TRANS_TYPE_17 == 1 -#define CONF_DMAC_TYPE_17 1 -#define CONF_DMAC_DSYNC_17 0 -#elif CONF_DMAC_TRANS_TYPE_17 == 2 -#define CONF_DMAC_TYPE_17 1 -#define CONF_DMAC_DSYNC_17 1 -#endif - -#if CONF_DMAC_TRIGSRC_17 == 0xFF -#define CONF_DMAC_SWREQ_17 1 -#else -#define CONF_DMAC_SWREQ_17 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_17_SETTINGS == 1 && CONF_DMAC_BEATSIZE_17 != 2 \ - && ((!CONF_DMAC_SRCINC_17) || (!CONF_DMAC_DSTINC_17))) -#if (!CONF_DMAC_SRCINC_17) -#define CONF_DMAC_SRC_STRIDE_17 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_17) -#define CONF_DMAC_DES_STRIDE_17 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_17 -#define CONF_DMAC_SRC_STRIDE_17 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_17 -#define CONF_DMAC_DES_STRIDE_17 0 -#endif - -// Channel 18 settings -// dmac_channel_18_settings -#ifndef CONF_DMAC_CHANNEL_18_SETTINGS -#define CONF_DMAC_CHANNEL_18_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_18 -#ifndef CONF_DMAC_BURSTSIZE_18 -#define CONF_DMAC_BURSTSIZE_18 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_18 -#ifndef CONF_DMAC_CHUNKSIZE_18 -#define CONF_DMAC_CHUNKSIZE_18 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_18 -#ifndef CONF_DMAC_BEATSIZE_18 -#define CONF_DMAC_BEATSIZE_18 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_18 -#ifndef CONF_DMAC_SRC_INTERFACE_18 -#define CONF_DMAC_SRC_INTERFACE_18 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_18 -#ifndef CONF_DMAC_DES_INTERFACE_18 -#define CONF_DMAC_DES_INTERFACE_18 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_18 -#ifndef CONF_DMAC_SRCINC_18 -#define CONF_DMAC_SRCINC_18 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_18 -#ifndef CONF_DMAC_DSTINC_18 -#define CONF_DMAC_DSTINC_18 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_18 -#ifndef CONF_DMAC_TRANS_TYPE_18 -#define CONF_DMAC_TRANS_TYPE_18 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_18 -#ifndef CONF_DMAC_TRIGSRC_18 -#define CONF_DMAC_TRIGSRC_18 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_18 == 0 -#define CONF_DMAC_TYPE_18 0 -#define CONF_DMAC_DSYNC_18 0 -#elif CONF_DMAC_TRANS_TYPE_18 == 1 -#define CONF_DMAC_TYPE_18 1 -#define CONF_DMAC_DSYNC_18 0 -#elif CONF_DMAC_TRANS_TYPE_18 == 2 -#define CONF_DMAC_TYPE_18 1 -#define CONF_DMAC_DSYNC_18 1 -#endif - -#if CONF_DMAC_TRIGSRC_18 == 0xFF -#define CONF_DMAC_SWREQ_18 1 -#else -#define CONF_DMAC_SWREQ_18 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_18_SETTINGS == 1 && CONF_DMAC_BEATSIZE_18 != 2 \ - && ((!CONF_DMAC_SRCINC_18) || (!CONF_DMAC_DSTINC_18))) -#if (!CONF_DMAC_SRCINC_18) -#define CONF_DMAC_SRC_STRIDE_18 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_18) -#define CONF_DMAC_DES_STRIDE_18 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_18 -#define CONF_DMAC_SRC_STRIDE_18 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_18 -#define CONF_DMAC_DES_STRIDE_18 0 -#endif - -// Channel 19 settings -// dmac_channel_19_settings -#ifndef CONF_DMAC_CHANNEL_19_SETTINGS -#define CONF_DMAC_CHANNEL_19_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_19 -#ifndef CONF_DMAC_BURSTSIZE_19 -#define CONF_DMAC_BURSTSIZE_19 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_19 -#ifndef CONF_DMAC_CHUNKSIZE_19 -#define CONF_DMAC_CHUNKSIZE_19 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_19 -#ifndef CONF_DMAC_BEATSIZE_19 -#define CONF_DMAC_BEATSIZE_19 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_19 -#ifndef CONF_DMAC_SRC_INTERFACE_19 -#define CONF_DMAC_SRC_INTERFACE_19 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_19 -#ifndef CONF_DMAC_DES_INTERFACE_19 -#define CONF_DMAC_DES_INTERFACE_19 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_19 -#ifndef CONF_DMAC_SRCINC_19 -#define CONF_DMAC_SRCINC_19 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_19 -#ifndef CONF_DMAC_DSTINC_19 -#define CONF_DMAC_DSTINC_19 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_19 -#ifndef CONF_DMAC_TRANS_TYPE_19 -#define CONF_DMAC_TRANS_TYPE_19 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_19 -#ifndef CONF_DMAC_TRIGSRC_19 -#define CONF_DMAC_TRIGSRC_19 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_19 == 0 -#define CONF_DMAC_TYPE_19 0 -#define CONF_DMAC_DSYNC_19 0 -#elif CONF_DMAC_TRANS_TYPE_19 == 1 -#define CONF_DMAC_TYPE_19 1 -#define CONF_DMAC_DSYNC_19 0 -#elif CONF_DMAC_TRANS_TYPE_19 == 2 -#define CONF_DMAC_TYPE_19 1 -#define CONF_DMAC_DSYNC_19 1 -#endif - -#if CONF_DMAC_TRIGSRC_19 == 0xFF -#define CONF_DMAC_SWREQ_19 1 -#else -#define CONF_DMAC_SWREQ_19 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_19_SETTINGS == 1 && CONF_DMAC_BEATSIZE_19 != 2 \ - && ((!CONF_DMAC_SRCINC_19) || (!CONF_DMAC_DSTINC_19))) -#if (!CONF_DMAC_SRCINC_19) -#define CONF_DMAC_SRC_STRIDE_19 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_19) -#define CONF_DMAC_DES_STRIDE_19 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_19 -#define CONF_DMAC_SRC_STRIDE_19 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_19 -#define CONF_DMAC_DES_STRIDE_19 0 -#endif - -// Channel 20 settings -// dmac_channel_20_settings -#ifndef CONF_DMAC_CHANNEL_20_SETTINGS -#define CONF_DMAC_CHANNEL_20_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_20 -#ifndef CONF_DMAC_BURSTSIZE_20 -#define CONF_DMAC_BURSTSIZE_20 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_20 -#ifndef CONF_DMAC_CHUNKSIZE_20 -#define CONF_DMAC_CHUNKSIZE_20 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_20 -#ifndef CONF_DMAC_BEATSIZE_20 -#define CONF_DMAC_BEATSIZE_20 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_20 -#ifndef CONF_DMAC_SRC_INTERFACE_20 -#define CONF_DMAC_SRC_INTERFACE_20 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_20 -#ifndef CONF_DMAC_DES_INTERFACE_20 -#define CONF_DMAC_DES_INTERFACE_20 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_20 -#ifndef CONF_DMAC_SRCINC_20 -#define CONF_DMAC_SRCINC_20 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_20 -#ifndef CONF_DMAC_DSTINC_20 -#define CONF_DMAC_DSTINC_20 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_20 -#ifndef CONF_DMAC_TRANS_TYPE_20 -#define CONF_DMAC_TRANS_TYPE_20 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_20 -#ifndef CONF_DMAC_TRIGSRC_20 -#define CONF_DMAC_TRIGSRC_20 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_20 == 0 -#define CONF_DMAC_TYPE_20 0 -#define CONF_DMAC_DSYNC_20 0 -#elif CONF_DMAC_TRANS_TYPE_20 == 1 -#define CONF_DMAC_TYPE_20 1 -#define CONF_DMAC_DSYNC_20 0 -#elif CONF_DMAC_TRANS_TYPE_20 == 2 -#define CONF_DMAC_TYPE_20 1 -#define CONF_DMAC_DSYNC_20 1 -#endif - -#if CONF_DMAC_TRIGSRC_20 == 0xFF -#define CONF_DMAC_SWREQ_20 1 -#else -#define CONF_DMAC_SWREQ_20 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_20_SETTINGS == 1 && CONF_DMAC_BEATSIZE_20 != 2 \ - && ((!CONF_DMAC_SRCINC_20) || (!CONF_DMAC_DSTINC_20))) -#if (!CONF_DMAC_SRCINC_20) -#define CONF_DMAC_SRC_STRIDE_20 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_20) -#define CONF_DMAC_DES_STRIDE_20 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_20 -#define CONF_DMAC_SRC_STRIDE_20 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_20 -#define CONF_DMAC_DES_STRIDE_20 0 -#endif - -// Channel 21 settings -// dmac_channel_21_settings -#ifndef CONF_DMAC_CHANNEL_21_SETTINGS -#define CONF_DMAC_CHANNEL_21_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_21 -#ifndef CONF_DMAC_BURSTSIZE_21 -#define CONF_DMAC_BURSTSIZE_21 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_21 -#ifndef CONF_DMAC_CHUNKSIZE_21 -#define CONF_DMAC_CHUNKSIZE_21 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_21 -#ifndef CONF_DMAC_BEATSIZE_21 -#define CONF_DMAC_BEATSIZE_21 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_21 -#ifndef CONF_DMAC_SRC_INTERFACE_21 -#define CONF_DMAC_SRC_INTERFACE_21 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_21 -#ifndef CONF_DMAC_DES_INTERFACE_21 -#define CONF_DMAC_DES_INTERFACE_21 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_21 -#ifndef CONF_DMAC_SRCINC_21 -#define CONF_DMAC_SRCINC_21 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_21 -#ifndef CONF_DMAC_DSTINC_21 -#define CONF_DMAC_DSTINC_21 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_21 -#ifndef CONF_DMAC_TRANS_TYPE_21 -#define CONF_DMAC_TRANS_TYPE_21 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_21 -#ifndef CONF_DMAC_TRIGSRC_21 -#define CONF_DMAC_TRIGSRC_21 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_21 == 0 -#define CONF_DMAC_TYPE_21 0 -#define CONF_DMAC_DSYNC_21 0 -#elif CONF_DMAC_TRANS_TYPE_21 == 1 -#define CONF_DMAC_TYPE_21 1 -#define CONF_DMAC_DSYNC_21 0 -#elif CONF_DMAC_TRANS_TYPE_21 == 2 -#define CONF_DMAC_TYPE_21 1 -#define CONF_DMAC_DSYNC_21 1 -#endif - -#if CONF_DMAC_TRIGSRC_21 == 0xFF -#define CONF_DMAC_SWREQ_21 1 -#else -#define CONF_DMAC_SWREQ_21 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_21_SETTINGS == 1 && CONF_DMAC_BEATSIZE_21 != 2 \ - && ((!CONF_DMAC_SRCINC_21) || (!CONF_DMAC_DSTINC_21))) -#if (!CONF_DMAC_SRCINC_21) -#define CONF_DMAC_SRC_STRIDE_21 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_21) -#define CONF_DMAC_DES_STRIDE_21 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_21 -#define CONF_DMAC_SRC_STRIDE_21 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_21 -#define CONF_DMAC_DES_STRIDE_21 0 -#endif - -// Channel 22 settings -// dmac_channel_22_settings -#ifndef CONF_DMAC_CHANNEL_22_SETTINGS -#define CONF_DMAC_CHANNEL_22_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_22 -#ifndef CONF_DMAC_BURSTSIZE_22 -#define CONF_DMAC_BURSTSIZE_22 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_22 -#ifndef CONF_DMAC_CHUNKSIZE_22 -#define CONF_DMAC_CHUNKSIZE_22 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_22 -#ifndef CONF_DMAC_BEATSIZE_22 -#define CONF_DMAC_BEATSIZE_22 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_22 -#ifndef CONF_DMAC_SRC_INTERFACE_22 -#define CONF_DMAC_SRC_INTERFACE_22 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_22 -#ifndef CONF_DMAC_DES_INTERFACE_22 -#define CONF_DMAC_DES_INTERFACE_22 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_22 -#ifndef CONF_DMAC_SRCINC_22 -#define CONF_DMAC_SRCINC_22 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_22 -#ifndef CONF_DMAC_DSTINC_22 -#define CONF_DMAC_DSTINC_22 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_22 -#ifndef CONF_DMAC_TRANS_TYPE_22 -#define CONF_DMAC_TRANS_TYPE_22 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_22 -#ifndef CONF_DMAC_TRIGSRC_22 -#define CONF_DMAC_TRIGSRC_22 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_22 == 0 -#define CONF_DMAC_TYPE_22 0 -#define CONF_DMAC_DSYNC_22 0 -#elif CONF_DMAC_TRANS_TYPE_22 == 1 -#define CONF_DMAC_TYPE_22 1 -#define CONF_DMAC_DSYNC_22 0 -#elif CONF_DMAC_TRANS_TYPE_22 == 2 -#define CONF_DMAC_TYPE_22 1 -#define CONF_DMAC_DSYNC_22 1 -#endif - -#if CONF_DMAC_TRIGSRC_22 == 0xFF -#define CONF_DMAC_SWREQ_22 1 -#else -#define CONF_DMAC_SWREQ_22 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_22_SETTINGS == 1 && CONF_DMAC_BEATSIZE_22 != 2 \ - && ((!CONF_DMAC_SRCINC_22) || (!CONF_DMAC_DSTINC_22))) -#if (!CONF_DMAC_SRCINC_22) -#define CONF_DMAC_SRC_STRIDE_22 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_22) -#define CONF_DMAC_DES_STRIDE_22 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_22 -#define CONF_DMAC_SRC_STRIDE_22 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_22 -#define CONF_DMAC_DES_STRIDE_22 0 -#endif - -// Channel 23 settings -// dmac_channel_23_settings -#ifndef CONF_DMAC_CHANNEL_23_SETTINGS -#define CONF_DMAC_CHANNEL_23_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_23 -#ifndef CONF_DMAC_BURSTSIZE_23 -#define CONF_DMAC_BURSTSIZE_23 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_23 -#ifndef CONF_DMAC_CHUNKSIZE_23 -#define CONF_DMAC_CHUNKSIZE_23 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_23 -#ifndef CONF_DMAC_BEATSIZE_23 -#define CONF_DMAC_BEATSIZE_23 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_23 -#ifndef CONF_DMAC_SRC_INTERFACE_23 -#define CONF_DMAC_SRC_INTERFACE_23 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_23 -#ifndef CONF_DMAC_DES_INTERFACE_23 -#define CONF_DMAC_DES_INTERFACE_23 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_23 -#ifndef CONF_DMAC_SRCINC_23 -#define CONF_DMAC_SRCINC_23 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_23 -#ifndef CONF_DMAC_DSTINC_23 -#define CONF_DMAC_DSTINC_23 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_23 -#ifndef CONF_DMAC_TRANS_TYPE_23 -#define CONF_DMAC_TRANS_TYPE_23 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_23 -#ifndef CONF_DMAC_TRIGSRC_23 -#define CONF_DMAC_TRIGSRC_23 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_23 == 0 -#define CONF_DMAC_TYPE_23 0 -#define CONF_DMAC_DSYNC_23 0 -#elif CONF_DMAC_TRANS_TYPE_23 == 1 -#define CONF_DMAC_TYPE_23 1 -#define CONF_DMAC_DSYNC_23 0 -#elif CONF_DMAC_TRANS_TYPE_23 == 2 -#define CONF_DMAC_TYPE_23 1 -#define CONF_DMAC_DSYNC_23 1 -#endif - -#if CONF_DMAC_TRIGSRC_23 == 0xFF -#define CONF_DMAC_SWREQ_23 1 -#else -#define CONF_DMAC_SWREQ_23 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_23_SETTINGS == 1 && CONF_DMAC_BEATSIZE_23 != 2 \ - && ((!CONF_DMAC_SRCINC_23) || (!CONF_DMAC_DSTINC_23))) -#if (!CONF_DMAC_SRCINC_23) -#define CONF_DMAC_SRC_STRIDE_23 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_23) -#define CONF_DMAC_DES_STRIDE_23 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_23 -#define CONF_DMAC_SRC_STRIDE_23 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_23 -#define CONF_DMAC_DES_STRIDE_23 0 -#endif - -// - -// <<< end of configuration section >>> - -#endif // HPL_XDMAC_CONFIG_H diff --git a/hw/bsp/same70_qmtech/peripheral_clk_config.h b/hw/bsp/same70_qmtech/peripheral_clk_config.h deleted file mode 100644 index 84756f5ac..000000000 --- a/hw/bsp/same70_qmtech/peripheral_clk_config.h +++ /dev/null @@ -1,126 +0,0 @@ -/* Auto-generated config file peripheral_clk_config.h */ -#ifndef PERIPHERAL_CLK_CONFIG_H -#define PERIPHERAL_CLK_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -/** - * \def CONF_HCLK_FREQUENCY - * \brief HCLK's Clock frequency - */ -#ifndef CONF_HCLK_FREQUENCY -#define CONF_HCLK_FREQUENCY 300000000 -#endif - -/** - * \def CONF_FCLK_FREQUENCY - * \brief FCLK's Clock frequency - */ -#ifndef CONF_FCLK_FREQUENCY -#define CONF_FCLK_FREQUENCY 300000000 -#endif - -/** - * \def CONF_CPU_FREQUENCY - * \brief CPU's Clock frequency - */ -#ifndef CONF_CPU_FREQUENCY -#define CONF_CPU_FREQUENCY 300000000 -#endif - -/** - * \def CONF_SLCK_FREQUENCY - * \brief Slow Clock frequency - */ -#define CONF_SLCK_FREQUENCY 0 - -/** - * \def CONF_MCK_FREQUENCY - * \brief Master Clock frequency - */ -#define CONF_MCK_FREQUENCY 150000000 - -/** - * \def CONF_PCK6_FREQUENCY - * \brief Programmable Clock Controller 6 frequency - */ -#define CONF_PCK6_FREQUENCY 1714285 - -// USART Clock Settings -// USART Clock source - -// <0=> Master Clock (MCK) -// <1=> MCK / 8 for USART -// <2=> Programmable Clock Controller 4 (PMC_PCK4) -// <3=> External Clock -// This defines the clock source for the USART -// usart_clock_source -#ifndef CONF_USART1_CK_SRC -#define CONF_USART1_CK_SRC 0 -#endif - -// USART External Clock Input on SCK <1-4294967295> -// Inputs the external clock frequency on SCK -// usart_clock_freq -#ifndef CONF_USART1_SCK_FREQ -#define CONF_USART1_SCK_FREQ 10000000 -#endif - -// - -/** - * \def USART FREQUENCY - * \brief USART's Clock frequency - */ -#ifndef CONF_USART1_FREQUENCY -#define CONF_USART1_FREQUENCY 150000000 -#endif - -#ifndef CONF_SRC_USB_480M -#define CONF_SRC_USB_480M 0 -#endif - -#ifndef CONF_SRC_USB_48M -#define CONF_SRC_USB_48M 1 -#endif - -// USB Full/Low Speed Clock -// USB Clock Controller (USB_48M) -// usb_fsls_clock_source -// 48MHz clock source for low speed and full speed. -// It must be available when low speed is supported by host driver. -// It must be available when low power mode is selected. -#ifndef CONF_USBHS_FSLS_SRC -#define CONF_USBHS_FSLS_SRC CONF_SRC_USB_48M -#endif - -// USB Clock Source(Normal/Low-power Mode Selection) -// USB High Speed Clock (USB_480M) -// USB Clock Controller (USB_48M) -// usb_clock_source -// Select the clock source for USB. -// In normal mode, use "USB High Speed Clock (USB_480M)". -// In low-power mode, use "USB Clock Controller (USB_48M)". -#ifndef CONF_USBHS_SRC -#define CONF_USBHS_SRC CONF_SRC_USB_480M -#endif - -/** - * \def CONF_USBHS_FSLS_FREQUENCY - * \brief USBHS's Full/Low Speed Clock Source frequency - */ -#ifndef CONF_USBHS_FSLS_FREQUENCY -#define CONF_USBHS_FSLS_FREQUENCY 48000000 -#endif - -/** - * \def CONF_USBHS_FREQUENCY - * \brief USBHS's Selected Clock Source frequency - */ -#ifndef CONF_USBHS_FREQUENCY -#define CONF_USBHS_FREQUENCY 480000000 -#endif - -// <<< end of configuration section >>> - -#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/hw/bsp/same70_qmtech/same70_qmtech.c b/hw/bsp/same70_qmtech/same70_qmtech.c deleted file mode 100644 index e5f0da198..000000000 --- a/hw/bsp/same70_qmtech/same70_qmtech.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "sam.h" -#include "bsp/board_api.h" - -#include "peripheral_clk_config.h" -#include "hpl/usart/hpl_usart_base.h" -#include "hpl/pmc/hpl_pmc.h" -#include "hal/include/hal_init.h" -#include "hal/include/hal_usart_async.h" -#include "hal/include/hal_gpio.h" - - -// You can get the board here: -// https://www.aliexpress.com/item/1005003173783268.html - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -#define LED_PIN GPIO(GPIO_PORTA, 15) - -#define BUTTON_PIN GPIO(GPIO_PORTA, 21) -#define BUTTON_STATE_ACTIVE 0 - -#define UART_TX_PIN GPIO(GPIO_PORTB, 1) -#define UART_RX_PIN GPIO(GPIO_PORTB, 0) - -static struct usart_async_descriptor edbg_com; -static uint8_t edbg_com_buffer[64]; -static volatile bool uart_busy = false; - -static void tx_cb_EDBG_COM(const struct usart_async_descriptor *const io_descr) -{ - (void) io_descr; - uart_busy = false; -} - -//------------- IMPLEMENTATION -------------// -void board_init(void) -{ - init_mcu(); - - /* Disable Watchdog */ - hri_wdt_set_MR_WDDIS_bit(WDT); - - // LED - _pmc_enable_periph_clock(ID_PIOB); - gpio_set_pin_level(LED_PIN, false); - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); - - // Button - _pmc_enable_periph_clock(ID_PIOA); - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); - - // Uart via EDBG Com - _pmc_enable_periph_clock(ID_USART1); - gpio_set_pin_function(UART_RX_PIN, MUX_PA21A_USART1_RXD1); - gpio_set_pin_function(UART_TX_PIN, MUX_PB4D_USART1_TXD1); - - usart_async_init(&edbg_com, USART1, edbg_com_buffer, sizeof(edbg_com_buffer), _usart_get_usart_async()); - usart_async_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE); - usart_async_register_callback(&edbg_com, USART_ASYNC_TXC_CB, tx_cb_EDBG_COM); - usart_async_enable(&edbg_com); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer (samd SystemCoreClock may not correct) - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - // Enable USB clock - _pmc_enable_periph_clock(ID_USBHS); - -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USBHS_Handler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - // while until previous transfer is complete - while(uart_busy) {} - uart_busy = true; - - io_write(&edbg_com.io, buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/same70_xplained/board.mk b/hw/bsp/same70_xplained/board.mk deleted file mode 100644 index 2d97ecdc1..000000000 --- a/hw/bsp/same70_xplained/board.mk +++ /dev/null @@ -1,67 +0,0 @@ -ASF_DIR = hw/mcu/microchip/same70 - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__SAME70Q21B__ \ - -DCFG_TUSB_MCU=OPT_MCU_SAMX7X - -# suppress following warnings from mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=redundant-decls - -SPEED ?= high - -ifeq ($(SPEED), high) - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED -else - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED -endif - -# SAM driver is flooded with -Wcast-qual which slow down complication significantly -CFLAGS_SKIP += -Wcast-qual - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = $(ASF_DIR)/same70b/gcc/gcc/same70q21b_flash.ld - -SRC_C += \ - src/portable/microchip/samx7x/dcd_samx7x.c \ - $(ASF_DIR)/same70b/gcc/gcc/startup_same70q21b.c \ - $(ASF_DIR)/same70b/gcc/system_same70q21b.c \ - $(ASF_DIR)/hpl/core/hpl_init.c \ - $(ASF_DIR)/hpl/usart/hpl_usart.c \ - $(ASF_DIR)/hpl/pmc/hpl_pmc.c \ - $(ASF_DIR)/hal/src/hal_usart_async.c \ - $(ASF_DIR)/hal/src/hal_io.c \ - $(ASF_DIR)/hal/src/hal_atomic.c \ - $(ASF_DIR)/hal/utils/src/utils_ringbuffer.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(ASF_DIR) \ - $(TOP)/$(ASF_DIR)/config \ - $(TOP)/$(ASF_DIR)/same70b/include \ - $(TOP)/$(ASF_DIR)/hal/include \ - $(TOP)/$(ASF_DIR)/hal/utils/include \ - $(TOP)/$(ASF_DIR)/hpl/core \ - $(TOP)/$(ASF_DIR)/hpl/pio \ - $(TOP)/$(ASF_DIR)/hpl/pmc \ - $(TOP)/$(ASF_DIR)/hri \ - $(TOP)/$(ASF_DIR)/CMSIS/Core/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7 - -# For flash-jlink target -JLINK_DEVICE = SAME70Q21B - -# flash using edbg from https://github.com/ataradov/edbg -# Note: SAME70's GPNVM1 must be set to 1 to boot from flash with -# edbg -t same70 -F w0,1,1 -flash: $(BUILD)/$(PROJECT).bin - edbg --verbose -t same70 -pv -f $< diff --git a/hw/bsp/same70_xplained/hpl_pmc_config.h b/hw/bsp/same70_xplained/hpl_pmc_config.h deleted file mode 100644 index 387aaa5df..000000000 --- a/hw/bsp/same70_xplained/hpl_pmc_config.h +++ /dev/null @@ -1,1053 +0,0 @@ -/* Auto-generated config file hpl_pmc_config.h */ -#ifndef HPL_PMC_CONFIG_H -#define HPL_PMC_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include - -#define CLK_SRC_OPTION_OSC32K 0 -#define CLK_SRC_OPTION_XOSC32K 1 -#define CLK_SRC_OPTION_OSC12M 2 -#define CLK_SRC_OPTION_XOSC20M 3 - -#define CLK_SRC_OPTION_SLCK 0 -#define CLK_SRC_OPTION_MAINCK 1 -#define CLK_SRC_OPTION_PLLACK 2 -#define CLK_SRC_OPTION_UPLLCKDIV 3 -#define CLK_SRC_OPTION_MCK 4 - -#define CLK_SRC_OPTION_UPLLCK 3 - -#define CONF_RC_4M 0 -#define CONF_RC_8M 1 -#define CONF_RC_12M 2 - -#define CONF_XOSC32K_NO_BYPASS 0 -#define CONF_XOSC32K_BYPASS 1 - -#define CONF_XOSC20M_NO_BYPASS 0 -#define CONF_XOSC20M_BYPASS 1 - -// Clock_SLCK configuration -// Indicates whether SLCK configuration is enabled or not -// enable_clk_gen_slck -#ifndef CONF_CLK_SLCK_CONFIG -#define CONF_CLK_SLCK_CONFIG 1 -#endif - -// Clock Generator -// clock generator SLCK source - -// 32kHz High Accuracy Internal Oscillator (OSC32K) - -// 32kHz External Crystal Oscillator (XOSC32K) - -// This defines the clock source for SLCK -// clk_gen_slck_oscillator -#ifndef CONF_CLK_GEN_SLCK_SRC -#define CONF_CLK_GEN_SLCK_SRC CLK_SRC_OPTION_OSC32K -#endif - -// Enable Clock_SLCK -// Indicates whether SLCK is enabled or disable -// clk_gen_slck_arch_enable -#ifndef CONF_CLK_SLCK_ENABLE -#define CONF_CLK_SLCK_ENABLE 1 -#endif - -// - -// - -// -// // Clock_MAINCK configuration -// Indicates whether MAINCK configuration is enabled or not -// enable_clk_gen_mainck -#ifndef CONF_CLK_MAINCK_CONFIG -#define CONF_CLK_MAINCK_CONFIG 1 -#endif - -// Clock Generator -// clock generator MAINCK source - -// Embedded 4/8/12MHz RC Oscillator (OSC12M) - -// External 3-20MHz Oscillator (XOSC20M) - -// This defines the clock source for MAINCK -// clk_gen_mainck_oscillator -#ifndef CONF_CLK_GEN_MAINCK_SRC -#define CONF_CLK_GEN_MAINCK_SRC CLK_SRC_OPTION_XOSC20M -#endif - -// Enable Clock_MAINCK -// Indicates whether MAINCK is enabled or disable -// clk_gen_mainck_arch_enable -#ifndef CONF_CLK_MAINCK_ENABLE -#define CONF_CLK_MAINCK_ENABLE 1 -#endif - -// Enable Main Clock Failure Detection -// Indicates whether Main Clock Failure Detection is enabled or disable. -// The 4/8/12 MHz RC oscillator must be selected as the source of MAINCK. -// clk_gen_cfden_enable -#ifndef CONF_CLK_CFDEN_ENABLE -#define CONF_CLK_CFDEN_ENABLE 0 -#endif - -// - -// - -// -// // Clock_MCKR configuration -// Indicates whether MCKR configuration is enabled or not -// enable_clk_gen_mckr -#ifndef CONF_CLK_MCKR_CONFIG -#define CONF_CLK_MCKR_CONFIG 1 -#endif - -// Clock Generator -// clock generator MCKR source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// PLLA Clock (PLLACK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// This defines the clock source for MCKR -// clk_gen_mckr_oscillator -#ifndef CONF_CLK_GEN_MCKR_SRC -#define CONF_CLK_GEN_MCKR_SRC CLK_SRC_OPTION_PLLACK -#endif - -// Enable Clock_MCKR -// Indicates whether MCKR is enabled or disable -// clk_gen_mckr_arch_enable -#ifndef CONF_CLK_MCKR_ENABLE -#define CONF_CLK_MCKR_ENABLE 1 -#endif - -// - -// - -// Master Clock Prescaler -// <0=> 1 -// <1=> 2 -// <2=> 4 -// <3=> 8 -// <4=> 16 -// <5=> 32 -// <6=> 64 -// <7=> 3 -// Select the clock prescaler. -// mckr_presc -#ifndef CONF_MCKR_PRESC -#define CONF_MCKR_PRESC 0 -#endif - -// -// // Clock_MCK configuration -// Indicates whether MCK configuration is enabled or not -// enable_clk_gen_mck -#ifndef CONF_CLK_MCK_CONFIG -#define CONF_CLK_MCK_CONFIG 1 -#endif - -// Clock Generator -// clock generator MCK source - -// Master Clock Controller (PMC_MCKR) - -// This defines the clock source for MCK -// clk_gen_mck_oscillator -#ifndef CONF_CLK_GEN_MCK_SRC -#define CONF_CLK_GEN_MCK_SRC CLK_SRC_OPTION_MCKR -#endif - -// - -// - -// Master Clock Controller Divider MCK divider -// <0=> 1 -// <1=> 2 -// <3=> 3 -// <2=> 4 -// Select the master clock divider. -// mck_div -#ifndef CONF_MCK_DIV -#define CONF_MCK_DIV 1 -#endif - -// -// // Clock_SYSTICK configuration -// Indicates whether SYSTICK configuration is enabled or not -// enable_clk_gen_systick -#ifndef CONF_CLK_SYSTICK_CONFIG -#define CONF_CLK_SYSTICK_CONFIG 1 -#endif - -// Clock Generator -// clock generator SYSTICK source - -// Master Clock Controller (PMC_MCKR) - -// This defines the clock source for SYSTICK -// clk_gen_systick_oscillator -#ifndef CONF_CLK_GEN_SYSTICK_SRC -#define CONF_CLK_GEN_SYSTICK_SRC CLK_SRC_OPTION_MCKR -#endif - -// - -// - -// Systick clock divider -// <8=> 8 -// Select systick clock divider -// systick_clock_div -#ifndef CONF_SYSTICK_DIV -#define CONF_SYSTICK_DIV 8 -#endif - -// -// // Clock_FCLK configuration -// Indicates whether FCLK configuration is enabled or not -// enable_clk_gen_fclk -#ifndef CONF_CLK_FCLK_CONFIG -#define CONF_CLK_FCLK_CONFIG 1 -#endif - -// Clock Generator -// clock generator FCLK source - -// Master Clock Controller (PMC_MCKR) - -// This defines the clock source for FCLK -// clk_gen_fclk_oscillator -#ifndef CONF_CLK_GEN_FCLK_SRC -#define CONF_CLK_GEN_FCLK_SRC CLK_SRC_OPTION_MCKR -#endif - -// - -// - -// -// // Clock_GCLK0 configuration -// Indicates whether GCLK0 configuration is enabled or not -// enable_clk_gen_gclk0 -#ifndef CONF_CLK_GCLK0_CONFIG -#define CONF_CLK_GCLK0_CONFIG 1 -#endif - -// Clock Generator -// clock generator GCLK0 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// USB 480M Clock (UPLLCK) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for GCLK0 -// clk_gen_gclk0_oscillator -#ifndef CONF_CLK_GEN_GCLK0_SRC -#define CONF_CLK_GEN_GCLK0_SRC CLK_SRC_OPTION_MCK -#endif - -// Enable Clock_GCLK0 -// Indicates whether GCLK0 is enabled or disable -// clk_gen_gclk0_arch_enable -#ifndef CONF_CLK_GCLK0_ENABLE -#define CONF_CLK_GCLK0_ENABLE 1 -#endif - -// - -// -// Enable GCLK0 GCLKEN -// Indicates whether GCLK0 GCLKEN is enabled or disable -// gclk0_gclken_enable -#ifndef CONF_GCLK0_GCLKEN_ENABLE -#define CONF_GCLK0_GCLKEN_ENABLE 0 -#endif - -// Generic Clock GCLK0 divider <1-256> -// Select the clock divider (divider = GCLKDIV + 1). -// gclk0_div -#ifndef CONF_GCLK0_DIV -#define CONF_GCLK0_DIV 2 -#endif - -// -// // Clock_GCLK1 configuration -// Indicates whether GCLK1 configuration is enabled or not -// enable_clk_gen_gclk1 -#ifndef CONF_CLK_GCLK1_CONFIG -#define CONF_CLK_GCLK1_CONFIG 1 -#endif - -// Clock Generator -// clock generator GCLK1 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// USB 480M Clock (UPLLCK) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for GCLK1 -// clk_gen_gclk1_oscillator -#ifndef CONF_CLK_GEN_GCLK1_SRC -#define CONF_CLK_GEN_GCLK1_SRC CLK_SRC_OPTION_PLLACK -#endif - -// Enable Clock_GCLK1 -// Indicates whether GCLK1 is enabled or disable -// clk_gen_gclk1_arch_enable -#ifndef CONF_CLK_GCLK1_ENABLE -#define CONF_CLK_GCLK1_ENABLE 1 -#endif - -// - -// -// Enable GCLK1 GCLKEN -// Indicates whether GCLK1 GCLKEN is enabled or disable -// gclk1_gclken_enable -#ifndef CONF_GCLK1_GCLKEN_ENABLE -#define CONF_GCLK1_GCLKEN_ENABLE 0 -#endif - -// Generic Clock GCLK1 divider <1-256> -// Select the clock divider (divider = GCLKDIV + 1). -// gclk1_div -#ifndef CONF_GCLK1_DIV -#define CONF_GCLK1_DIV 3 -#endif - -// -// // Clock_PCK0 configuration -// Indicates whether PCK0 configuration is enabled or not -// enable_clk_gen_pck0 -#ifndef CONF_CLK_PCK0_CONFIG -#define CONF_CLK_PCK0_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK0 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK0 -// clk_gen_pck0_oscillator -#ifndef CONF_CLK_GEN_PCK0_SRC -#define CONF_CLK_GEN_PCK0_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK0 -// Indicates whether PCK0 is enabled or disable -// clk_gen_pck0_arch_enable -#ifndef CONF_CLK_PCK0_ENABLE -#define CONF_CLK_PCK0_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck0_presc -#ifndef CONF_PCK0_PRESC -#define CONF_PCK0_PRESC 1 -#endif - -// -// // Clock_PCK1 configuration -// Indicates whether PCK1 configuration is enabled or not -// enable_clk_gen_pck1 -#ifndef CONF_CLK_PCK1_CONFIG -#define CONF_CLK_PCK1_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK1 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK1 -// clk_gen_pck1_oscillator -#ifndef CONF_CLK_GEN_PCK1_SRC -#define CONF_CLK_GEN_PCK1_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK1 -// Indicates whether PCK1 is enabled or disable -// clk_gen_pck1_arch_enable -#ifndef CONF_CLK_PCK1_ENABLE -#define CONF_CLK_PCK1_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck1_presc -#ifndef CONF_PCK1_PRESC -#define CONF_PCK1_PRESC 2 -#endif - -// -// // Clock_PCK2 configuration -// Indicates whether PCK2 configuration is enabled or not -// enable_clk_gen_pck2 -#ifndef CONF_CLK_PCK2_CONFIG -#define CONF_CLK_PCK2_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK2 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK2 -// clk_gen_pck2_oscillator -#ifndef CONF_CLK_GEN_PCK2_SRC -#define CONF_CLK_GEN_PCK2_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK2 -// Indicates whether PCK2 is enabled or disable -// clk_gen_pck2_arch_enable -#ifndef CONF_CLK_PCK2_ENABLE -#define CONF_CLK_PCK2_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck2_presc -#ifndef CONF_PCK2_PRESC -#define CONF_PCK2_PRESC 3 -#endif - -// -// // Clock_PCK3 configuration -// Indicates whether PCK3 configuration is enabled or not -// enable_clk_gen_pck3 -#ifndef CONF_CLK_PCK3_CONFIG -#define CONF_CLK_PCK3_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK3 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK3 -// clk_gen_pck3_oscillator -#ifndef CONF_CLK_GEN_PCK3_SRC -#define CONF_CLK_GEN_PCK3_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK3 -// Indicates whether PCK3 is enabled or disable -// clk_gen_pck3_arch_enable -#ifndef CONF_CLK_PCK3_ENABLE -#define CONF_CLK_PCK3_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck3_presc -#ifndef CONF_PCK3_PRESC -#define CONF_PCK3_PRESC 4 -#endif - -// -// // Clock_PCK4 configuration -// Indicates whether PCK4 configuration is enabled or not -// enable_clk_gen_pck4 -#ifndef CONF_CLK_PCK4_CONFIG -#define CONF_CLK_PCK4_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK4 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK4 -// clk_gen_pck4_oscillator -#ifndef CONF_CLK_GEN_PCK4_SRC -#define CONF_CLK_GEN_PCK4_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK4 -// Indicates whether PCK4 is enabled or disable -// clk_gen_pck4_arch_enable -#ifndef CONF_CLK_PCK4_ENABLE -#define CONF_CLK_PCK4_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck4_presc -#ifndef CONF_PCK4_PRESC -#define CONF_PCK4_PRESC 5 -#endif - -// -// // Clock_PCK5 configuration -// Indicates whether PCK5 configuration is enabled or not -// enable_clk_gen_pck5 -#ifndef CONF_CLK_PCK5_CONFIG -#define CONF_CLK_PCK5_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK5 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK5 -// clk_gen_pck5_oscillator -#ifndef CONF_CLK_GEN_PCK5_SRC -#define CONF_CLK_GEN_PCK5_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK5 -// Indicates whether PCK5 is enabled or disable -// clk_gen_pck5_arch_enable -#ifndef CONF_CLK_PCK5_ENABLE -#define CONF_CLK_PCK5_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck5_presc -#ifndef CONF_PCK5_PRESC -#define CONF_PCK5_PRESC 6 -#endif - -// -// // Clock_PCK6 configuration -// Indicates whether PCK6 configuration is enabled or not -// enable_clk_gen_pck6 -#ifndef CONF_CLK_PCK6_CONFIG -#define CONF_CLK_PCK6_CONFIG 1 -#endif - -// Clock Generator -// clock generator PCK6 source - -// Slow Clock (SLCK) - -// Main Clock (MAINCK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// PLLA Clock (PLLACK) - -// Master Clock (MCK) - -// This defines the clock source for PCK6 -// clk_gen_pck6_oscillator -#ifndef CONF_CLK_GEN_PCK6_SRC -#define CONF_CLK_GEN_PCK6_SRC CLK_SRC_OPTION_MAINCK -#endif - -// Enable Clock_PCK6 -// Indicates whether PCK6 is enabled or disable -// clk_gen_pck6_arch_enable -#ifndef CONF_CLK_PCK6_ENABLE -#define CONF_CLK_PCK6_ENABLE 0 -#endif - -// - -// - -// Programmable Clock Controller Prescaler <1-256> -// Select the clock prescaler (prescaler = PRESC + 1). -// pck6_presc -#ifndef CONF_PCK6_PRESC -#define CONF_PCK6_PRESC 7 -#endif - -// -// // Clock_USB_480M configuration -// Indicates whether USB_480M configuration is enabled or not -// enable_clk_gen_usb_480m -#ifndef CONF_CLK_USB_480M_CONFIG -#define CONF_CLK_USB_480M_CONFIG 1 -#endif - -// Clock Generator -// clock generator USB_480M source - -// USB 480M Clock (UPLLCK) - -// This defines the clock source for USB_480M -// clk_gen_usb_480m_oscillator -#ifndef CONF_CLK_GEN_USB_480M_SRC -#define CONF_CLK_GEN_USB_480M_SRC CLK_SRC_OPTION_UPLLCK -#endif - -// - -// - -// -// // Clock_USB_48M configuration -// Indicates whether USB_48M configuration is enabled or not -// enable_clk_gen_usb_48m -#ifndef CONF_CLK_USB_48M_CONFIG -#define CONF_CLK_USB_48M_CONFIG 1 -#endif - -// Clock Generator -// clock generator USB_48M source - -// PLLA Clock (PLLACK) - -// UDPLL with Divider (MCKR UPLLDIV2) - -// This defines the clock source for USB_48M -// clk_gen_usb_48m_oscillator -#ifndef CONF_CLK_GEN_USB_48M_SRC -#define CONF_CLK_GEN_USB_48M_SRC CLK_SRC_OPTION_UPLLCKDIV -#endif - -// Enable Clock_USB_48M -// Indicates whether USB_48M is enabled or disable -// clk_gen_usb_48m_arch_enable -#ifndef CONF_CLK_USB_48M_ENABLE -#define CONF_CLK_USB_48M_ENABLE 1 -#endif - -// - -// - -// USB Clock Controller Divider <1-16> -// Select the USB clock divider (divider = USBDIV + 1). -// usb_48m_div -#ifndef CONF_USB_48M_DIV -#define CONF_USB_48M_DIV 5 -#endif - -// -// // Clock_SLCK2 configuration -// Indicates whether SLCK2 configuration is enabled or not -// enable_clk_gen_slck2 -#ifndef CONF_CLK_SLCK2_CONFIG -#define CONF_CLK_SLCK2_CONFIG 1 -#endif - -// Clock Generator -// clock generator SLCK2 source - -// Slow Clock (SLCK) - -// This defines the clock source for SLCK2 -// clk_gen_slck2_oscillator -#ifndef CONF_CLK_GEN_SLCK2_SRC -#define CONF_CLK_GEN_SLCK2_SRC CLK_SRC_OPTION_SLCK -#endif - -// - -// - -// -// - -// System Configuration -// Indicates whether configuration for system is enabled or not -// enable_hclk_clock -#ifndef CONF_SYSTEM_CONFIG -#define CONF_SYSTEM_CONFIG 1 -#endif - -// Processor Clock Settings -// Processor Clock source -// Master Clock Controller (PMC_MCKR) -// This defines the clock source for the HCLK (Processor clock) -// hclk_clock_source -#ifndef CONF_HCLK_SRC -#define CONF_HCLK_SRC MCKR -#endif - -// Flash Wait State -// <0=> 1 cycle -// <1=> 2 cycles -// <2=> 3 cycles -// <3=> 4 cycles -// <4=> 5 cycles -// <5=> 6 cycles -// <6=> 7 cycles -// This field defines the number of wait states for read and write operations. -// efc_fws -#ifndef CONF_EFC_WAIT_STATE -#define CONF_EFC_WAIT_STATE 5 -#endif - -// -// - -// SysTick Clock -// enable_systick_clk_clock -#ifndef CONF_SYSTICK_CLK_CONFIG -#define CONF_SYSTICK_CLK_CONFIG 1 -#endif - -// SysTick Clock source -// Master Clock Controller (PMC_MCKR) -// This defines the clock source for the SysTick Clock -// systick_clk_clock_source -#ifndef CONF_SYSTICK_CLK_SRC -#define CONF_SYSTICK_CLK_SRC MCKR -#endif - -// SysTick Clock Divider -// <8=> 8 -// Fixed to 8 if Systick is not using Processor clock -// systick_clk_clock_div -#ifndef CONF_SYSTICK_CLK_DIV -#define CONF_SYSTICK_CLK_DIV 8 -#endif - -// - -// OSC32K Oscillator Configuration -// Indicates whether configuration for OSC32K is enabled or not -// enable_osc32k -#ifndef CONF_OSC32K_CONFIG -#define CONF_OSC32K_CONFIG 1 -#endif - -// OSC32K Oscillator Control -// OSC32K Oscillator Enable -// Indicates whether OSC32K Oscillator is enabled or not -// osc32k_arch_enable -#ifndef CONF_OSC32K_ENABLE -#define CONF_OSC32K_ENABLE 0 -#endif -// -// - -// XOSC32K Oscillator Configuration -// Indicates whether configuration for XOSC32K is enabled or not -// enable_xosc32k -#ifndef CONF_XOSC32K_CONFIG -#define CONF_XOSC32K_CONFIG 0 -#endif - -// XOSC32K Oscillator Control -// Oscillator Bypass Select -// The 32kHz crystal oscillator is not bypassed. -// The 32kHz crystal oscillator is bypassed. -// Indicates whether XOSC32K is bypassed. -// xosc32k_bypass -#ifndef CONF_XOSC32K -#define CONF_XOSC32K CONF_XOSC32K_NO_BYPASS -#endif - -// XOSC32K Oscillator Enable -// Indicates whether XOSC32K Oscillator is enabled or not -// xosc32k_arch_enable -#ifndef CONF_XOSC32K_ENABLE -#define CONF_XOSC32K_ENABLE 0 -#endif -// -// - -// OSC12M Oscillator Configuration -// Indicates whether configuration for OSC12M is enabled or not -// enable_osc12m -#ifndef CONF_OSC12M_CONFIG -#define CONF_OSC12M_CONFIG 0 -#endif - -// OSC12M Oscillator Control -// OSC12M Oscillator Enable -// Indicates whether OSC12M Oscillator is enabled or not. -// osc12m_arch_enable -#ifndef CONF_OSC12M_ENABLE -#define CONF_OSC12M_ENABLE 0 -#endif - -// OSC12M selector -// <0=> 4000000 -// <1=> 8000000 -// <2=> 12000000 -// Select the frequency of embedded fast RC oscillator. -// osc12m_selector -#ifndef CONF_OSC12M_SELECTOR -#define CONF_OSC12M_SELECTOR 2 -#endif -// -// - -// XOSC20M Oscillator Configuration -// Indicates whether configuration for XOSC20M is enabled or not. -// enable_xosc20m -#ifndef CONF_XOSC20M_CONFIG -#define CONF_XOSC20M_CONFIG 1 -#endif - -// XOSC20M Oscillator Control -// XOSC20M selector <3000000-20000000> -// Select the frequency of crystal or ceramic resonator oscillator. -// xosc20m_selector -#ifndef CONF_XOSC20M_SELECTOR -#define CONF_XOSC20M_SELECTOR 12000000 -#endif - -// Start up time for the external oscillator (ms): <0-256> -// Select start-up time. -// xosc20m_startup_time -#ifndef CONF_XOSC20M_STARTUP_TIME -#define CONF_XOSC20M_STARTUP_TIME 62 -#endif - -// Oscillator Bypass Select -// The external crystal oscillator is not bypassed. -// The external crystal oscillator is bypassed. -// Indicates whether XOSC20M is bypassed. -// xosc20m_bypass -#ifndef CONF_XOSC20M -#define CONF_XOSC20M CONF_XOSC20M_NO_BYPASS -#endif - -// XOSC20M Oscillator Enable -// Indicates whether XOSC20M Oscillator is enabled or not -// xosc20m_arch_enable -#ifndef CONF_XOSC20M_ENABLE -#define CONF_XOSC20M_ENABLE 1 -#endif -// -// - -// PLLACK Oscillator Configuration -// Indicates whether configuration for PLLACK is enabled or not -// enable_pllack -#ifndef CONF_PLLACK_CONFIG -#define CONF_PLLACK_CONFIG 1 -#endif - -// PLLACK Reference Clock Source -// Main Clock (MAINCK) -// Select the clock source. -// pllack_ref_clock -#ifndef CONF_PLLACK_CLK -#define CONF_PLLACK_CLK MAINCK -#endif - -// PLLACK Oscillator Control -// PLLACK Oscillator Enable -// Indicates whether PLLACK Oscillator is enabled or not -// pllack_arch_enable -#ifndef CONF_PLLACK_ENABLE -#define CONF_PLLACK_ENABLE 1 -#endif - -// PLLA Frontend Divider (DIVA) <1-255> -// Select the clock divider -// pllack_div -#ifndef CONF_PLLACK_DIV -#define CONF_PLLACK_DIV 1 -#endif - -// PLLACK Muliplier <1-62> -// Indicates PLLA multiplier (multiplier = MULA + 1). -// pllack_mul -#ifndef CONF_PLLACK_MUL -#define CONF_PLLACK_MUL 25 -#endif -// -// - -// UPLLCK Oscillator Configuration -// Indicates whether configuration for UPLLCK is enabled or not -// enable_upllck -#ifndef CONF_UPLLCK_CONFIG -#define CONF_UPLLCK_CONFIG 1 -#endif - -// UPLLCK Reference Clock Source -// External 3-20MHz Oscillator (XOSC20M) -// Select the clock source,only when the input frequency is 12M or 16M, the upllck output is 480M. -// upllck_ref_clock -#ifndef CONF_UPLLCK_CLK -#define CONF_UPLLCK_CLK XOSC20M -#endif - -// UPLLCK Oscillator Control -// UPLLCK Oscillator Enable -// Indicates whether UPLLCK Oscillator is enabled or not -// upllck_arch_enable -#ifndef CONF_UPLLCK_ENABLE -#define CONF_UPLLCK_ENABLE 1 -#endif -// -// - -// UPLLCKDIV Oscillator Configuration -// Indicates whether configuration for UPLLCKDIV is enabled or not -// enable_upllckdiv -#ifndef CONF_UPLLCKDIV_CONFIG -#define CONF_UPLLCKDIV_CONFIG 1 -#endif - -// UPLLCKDIV Reference Clock Source -// USB 480M Clock (UPLLCK) -// Select the clock source. -// upllckdiv_ref_clock -#ifndef CONF_UPLLCKDIV_CLK -#define CONF_UPLLCKDIV_CLK UPLLCK -#endif - -// UPLLCKDIV Oscillator Control -// UPLLCKDIV Clock Divider -// <0=> 1 -// <1=> 2 -// Select the clock divider. -// upllckdiv_div -#ifndef CONF_UPLLCKDIV_DIV -#define CONF_UPLLCKDIV_DIV 1 -#endif -// -// - -// MCK/8 -// enable_mck_div_8 -#ifndef CONF_MCK_DIV_8_CONFIG -#define CONF_MCK_DIV_8_CONFIG 0 -#endif - -// MCK/8 Source -// <0=> Master Clock (MCK) -// mck_div_8_src -#ifndef CONF_MCK_DIV_8_SRC -#define CONF_MCK_DIV_8_SRC 0 -#endif -// - -// External Clock Input Configuration -// enable_dummy_ext -#ifndef CONF_DUMMY_EXT_CONFIG -#define CONF_DUMMY_EXT_CONFIG 1 -#endif - -// External Clock Input Source -// All here are dummy values -// Refer to the peripherals settings for actual input information -// <0=> Specific clock input from specific pin -// dummy_ext_src -#ifndef CONF_DUMMY_EXT_SRC -#define CONF_DUMMY_EXT_SRC 0 -#endif -// - -// External Clock Configuration -// enable_dummy_ext_clk -#ifndef CONF_DUMMY_EXT_CLK_CONFIG -#define CONF_DUMMY_EXT_CLK_CONFIG 1 -#endif - -// External Clock Source -// All here are dummy values -// Refer to the peripherals settings for actual input information -// <0=> External Clock Input -// dummy_ext_clk_src -#ifndef CONF_DUMMY_EXT_CLK_SRC -#define CONF_DUMMY_EXT_CLK_SRC 0 -#endif -// - -// <<< end of configuration section >>> - -#endif // HPL_PMC_CONFIG_H diff --git a/hw/bsp/same70_xplained/hpl_usart_config.h b/hw/bsp/same70_xplained/hpl_usart_config.h deleted file mode 100644 index 50ca3f15c..000000000 --- a/hw/bsp/same70_xplained/hpl_usart_config.h +++ /dev/null @@ -1,215 +0,0 @@ -/* Auto-generated config file hpl_usart_config.h */ -#ifndef HPL_USART_CONFIG_H -#define HPL_USART_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include - -#ifndef CONF_USART_1_ENABLE -#define CONF_USART_1_ENABLE 1 -#endif - -// Basic Configuration - -// Frame parity -// <0x0=>Even parity -// <0x1=>Odd parity -// <0x2=>Parity forced to 0 -// <0x3=>Parity forced to 1 -// <0x4=>No parity -// Parity bit mode for USART frame -// usart_parity -#ifndef CONF_USART_1_PARITY -#define CONF_USART_1_PARITY 0x4 -#endif - -// Character Size -// <0x0=>5 bits -// <0x1=>6 bits -// <0x2=>7 bits -// <0x3=>8 bits -// Data character size in USART frame -// usart_character_size -#ifndef CONF_USART_1_CHSIZE -#define CONF_USART_1_CHSIZE 0x3 -#endif - -// Stop Bit -// <0=>1 stop bit -// <1=>1.5 stop bits -// <2=>2 stop bits -// Number of stop bits in USART frame -// usart_stop_bit -#ifndef CONF_USART_1_SBMODE -#define CONF_USART_1_SBMODE 0 -#endif - -// Clock Output Select -// <0=>The USART does not drive the SCK pin -// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK -// Clock Output Select in USART sck, if in usrt master mode, please drive SCK. -// usart_clock_output_select -#ifndef CONF_USART_1_CLKO -#define CONF_USART_1_CLKO 0 -#endif - -// Baud rate <1-3000000> -// USART baud rate setting -// usart_baud_rate -#ifndef CONF_USART_1_BAUD -#define CONF_USART_1_BAUD 9600 -#endif - -// - -// Advanced configuration -// usart_advanced -#ifndef CONF_USART_1_ADVANCED_CONFIG -#define CONF_USART_1_ADVANCED_CONFIG 0 -#endif - -// Channel Mode -// <0=>Normal Mode -// <1=>Automatic Echo -// <2=>Local Loopback -// <3=>Remote Loopback -// Channel mode in USART frame -// usart_channel_mode -#ifndef CONF_USART_1_CHMODE -#define CONF_USART_1_CHMODE 0 -#endif - -// 9 bits character enable -// Enable 9 bits character, this has high priority than 5/6/7/8 bits. -// usart_9bits_enable -#ifndef CONF_USART_1_MODE9 -#define CONF_USART_1_MODE9 0 -#endif - -// Variable Sync -// <0=>User defined configuration -// <1=>sync field is updated when a character is written into US_THR -// Variable Synchronization of Command/Data Sync Start Frarm Delimiter -// variable_sync -#ifndef CONF_USART_1_VAR_SYNC -#define CONF_USART_1_VAR_SYNC 0 -#endif - -// Oversampling Mode -// <0=>16 Oversampling -// <1=>8 Oversampling -// Oversampling Mode in UART mode -// usart__oversampling_mode -#ifndef CONF_USART_1_OVER -#define CONF_USART_1_OVER 0 -#endif - -// Inhibit Non Ack -// <0=>The NACK is generated -// <1=>The NACK is not generated -// Inhibit Non Acknowledge -// usart__inack -#ifndef CONF_USART_1_INACK -#define CONF_USART_1_INACK 1 -#endif - -// Disable Successive NACK -// <0=>NACK is sent on the ISO line as soon as a parity error occurs -// <1=>Many parity errors generate a NACK on the ISO line -// Disable Successive NACK -// usart_dsnack -#ifndef CONF_USART_1_DSNACK -#define CONF_USART_1_DSNACK 0 -#endif - -// Inverted Data -// <0=>Data isn't inverted, nomal mode -// <1=>Data is inverted -// Inverted Data -// usart_invdata -#ifndef CONF_USART_1_INVDATA -#define CONF_USART_1_INVDATA 0 -#endif - -// Maximum Number of Automatic Iteration <0-7> -// Defines the maximum number of iterations in mode ISO7816, protocol T = 0. -// usart_max_iteration -#ifndef CONF_USART_1_MAX_ITERATION -#define CONF_USART_1_MAX_ITERATION 0 -#endif - -// Receive Line Filter enable -// whether the USART filters the receive line using a three-sample filter -// usart_receive_filter_enable -#ifndef CONF_USART_1_FILTER -#define CONF_USART_1_FILTER 0 -#endif - -// Manchester Encoder/Decoder Enable -// whether the USART Manchester Encoder/Decoder -// usart_manchester_filter_enable -#ifndef CONF_USART_1_MAN -#define CONF_USART_1_MAN 0 -#endif - -// Manchester Synchronization Mode -// <0=>The Manchester start bit is a 0 to 1 transition -// <1=>The Manchester start bit is a 1 to 0 transition -// Manchester Synchronization Mode -// usart_manchester_synchronization_mode -#ifndef CONF_USART_1_MODSYNC -#define CONF_USART_1_MODSYNC 0 -#endif - -// Start Frame Delimiter Selector -// <0=>Start frame delimiter is COMMAND or DATA SYNC -// <1=>Start frame delimiter is one bit -// Start Frame Delimiter Selector -// usart_start_frame_delimiter -#ifndef CONF_USART_1_ONEBIT -#define CONF_USART_1_ONEBIT 0 -#endif - -// Fractional Part <0-7> -// Fractional part of the baud rate if baud rate generator is in fractional mode -// usart_arch_fractional -#ifndef CONF_USART_1_FRACTIONAL -#define CONF_USART_1_FRACTIONAL 0x0 -#endif - -// Data Order -// <0=>LSB is transmitted first -// <1=>MSB is transmitted first -// Data order of the data bits in the frame -// usart_arch_msbf -#ifndef CONF_USART_1_MSBF -#define CONF_USART_1_MSBF 0 -#endif - -// - -#define CONF_USART_1_MODE 0x0 - -// Calculate BAUD register value in UART mode -#if CONF_USART1_CK_SRC < 3 -#ifndef CONF_USART_1_BAUD_CD -#define CONF_USART_1_BAUD_CD ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / 8 / (2 - CONF_USART_1_OVER)) -#endif -#ifndef CONF_USART_1_BAUD_FP -#define CONF_USART_1_BAUD_FP \ - ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / (2 - CONF_USART_1_OVER) - 8 * CONF_USART_1_BAUD_CD) -#endif -#elif CONF_USART1_CK_SRC == 3 -// No division is active. The value written in US_BRGR has no effect. -#ifndef CONF_USART_1_BAUD_CD -#define CONF_USART_1_BAUD_CD 1 -#endif -#ifndef CONF_USART_1_BAUD_FP -#define CONF_USART_1_BAUD_FP 1 -#endif -#endif - -// <<< end of configuration section >>> - -#endif // HPL_USART_CONFIG_H diff --git a/hw/bsp/same70_xplained/hpl_xdmac_config.h b/hw/bsp/same70_xplained/hpl_xdmac_config.h deleted file mode 100644 index a3d62c6fc..000000000 --- a/hw/bsp/same70_xplained/hpl_xdmac_config.h +++ /dev/null @@ -1,4400 +0,0 @@ -/* Auto-generated config file hpl_xdmac_config.h */ -#ifndef HPL_XDMAC_CONFIG_H -#define HPL_XDMAC_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -// XDMAC enable -// Indicates whether xdmac is enabled or not -// xdmac_enable -#ifndef CONF_DMA_ENABLE -#define CONF_DMA_ENABLE 0 -#endif - -// Channel 0 settings -// dmac_channel_0_settings -#ifndef CONF_DMAC_CHANNEL_0_SETTINGS -#define CONF_DMAC_CHANNEL_0_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_0 -#ifndef CONF_DMAC_BURSTSIZE_0 -#define CONF_DMAC_BURSTSIZE_0 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_0 -#ifndef CONF_DMAC_CHUNKSIZE_0 -#define CONF_DMAC_CHUNKSIZE_0 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_0 -#ifndef CONF_DMAC_BEATSIZE_0 -#define CONF_DMAC_BEATSIZE_0 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_0 -#ifndef CONF_DMAC_SRC_INTERFACE_0 -#define CONF_DMAC_SRC_INTERFACE_0 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_0 -#ifndef CONF_DMAC_DES_INTERFACE_0 -#define CONF_DMAC_DES_INTERFACE_0 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_0 -#ifndef CONF_DMAC_SRCINC_0 -#define CONF_DMAC_SRCINC_0 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_0 -#ifndef CONF_DMAC_DSTINC_0 -#define CONF_DMAC_DSTINC_0 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_0 -#ifndef CONF_DMAC_TRANS_TYPE_0 -#define CONF_DMAC_TRANS_TYPE_0 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_0 -#ifndef CONF_DMAC_TRIGSRC_0 -#define CONF_DMAC_TRIGSRC_0 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_0 == 0 -#define CONF_DMAC_TYPE_0 0 -#define CONF_DMAC_DSYNC_0 0 -#elif CONF_DMAC_TRANS_TYPE_0 == 1 -#define CONF_DMAC_TYPE_0 1 -#define CONF_DMAC_DSYNC_0 0 -#elif CONF_DMAC_TRANS_TYPE_0 == 2 -#define CONF_DMAC_TYPE_0 1 -#define CONF_DMAC_DSYNC_0 1 -#endif - -#if CONF_DMAC_TRIGSRC_0 == 0xFF -#define CONF_DMAC_SWREQ_0 1 -#else -#define CONF_DMAC_SWREQ_0 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_0_SETTINGS == 1 && CONF_DMAC_BEATSIZE_0 != 2 && ((!CONF_DMAC_SRCINC_0) || (!CONF_DMAC_DSTINC_0))) -#if (!CONF_DMAC_SRCINC_0) -#define CONF_DMAC_SRC_STRIDE_0 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_0) -#define CONF_DMAC_DES_STRIDE_0 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_0 -#define CONF_DMAC_SRC_STRIDE_0 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_0 -#define CONF_DMAC_DES_STRIDE_0 0 -#endif - -// Channel 1 settings -// dmac_channel_1_settings -#ifndef CONF_DMAC_CHANNEL_1_SETTINGS -#define CONF_DMAC_CHANNEL_1_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_1 -#ifndef CONF_DMAC_BURSTSIZE_1 -#define CONF_DMAC_BURSTSIZE_1 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_1 -#ifndef CONF_DMAC_CHUNKSIZE_1 -#define CONF_DMAC_CHUNKSIZE_1 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_1 -#ifndef CONF_DMAC_BEATSIZE_1 -#define CONF_DMAC_BEATSIZE_1 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_1 -#ifndef CONF_DMAC_SRC_INTERFACE_1 -#define CONF_DMAC_SRC_INTERFACE_1 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_1 -#ifndef CONF_DMAC_DES_INTERFACE_1 -#define CONF_DMAC_DES_INTERFACE_1 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_1 -#ifndef CONF_DMAC_SRCINC_1 -#define CONF_DMAC_SRCINC_1 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_1 -#ifndef CONF_DMAC_DSTINC_1 -#define CONF_DMAC_DSTINC_1 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_1 -#ifndef CONF_DMAC_TRANS_TYPE_1 -#define CONF_DMAC_TRANS_TYPE_1 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_1 -#ifndef CONF_DMAC_TRIGSRC_1 -#define CONF_DMAC_TRIGSRC_1 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_1 == 0 -#define CONF_DMAC_TYPE_1 0 -#define CONF_DMAC_DSYNC_1 0 -#elif CONF_DMAC_TRANS_TYPE_1 == 1 -#define CONF_DMAC_TYPE_1 1 -#define CONF_DMAC_DSYNC_1 0 -#elif CONF_DMAC_TRANS_TYPE_1 == 2 -#define CONF_DMAC_TYPE_1 1 -#define CONF_DMAC_DSYNC_1 1 -#endif - -#if CONF_DMAC_TRIGSRC_1 == 0xFF -#define CONF_DMAC_SWREQ_1 1 -#else -#define CONF_DMAC_SWREQ_1 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_1_SETTINGS == 1 && CONF_DMAC_BEATSIZE_1 != 2 && ((!CONF_DMAC_SRCINC_1) || (!CONF_DMAC_DSTINC_1))) -#if (!CONF_DMAC_SRCINC_1) -#define CONF_DMAC_SRC_STRIDE_1 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_1) -#define CONF_DMAC_DES_STRIDE_1 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_1 -#define CONF_DMAC_SRC_STRIDE_1 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_1 -#define CONF_DMAC_DES_STRIDE_1 0 -#endif - -// Channel 2 settings -// dmac_channel_2_settings -#ifndef CONF_DMAC_CHANNEL_2_SETTINGS -#define CONF_DMAC_CHANNEL_2_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_2 -#ifndef CONF_DMAC_BURSTSIZE_2 -#define CONF_DMAC_BURSTSIZE_2 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_2 -#ifndef CONF_DMAC_CHUNKSIZE_2 -#define CONF_DMAC_CHUNKSIZE_2 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_2 -#ifndef CONF_DMAC_BEATSIZE_2 -#define CONF_DMAC_BEATSIZE_2 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_2 -#ifndef CONF_DMAC_SRC_INTERFACE_2 -#define CONF_DMAC_SRC_INTERFACE_2 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_2 -#ifndef CONF_DMAC_DES_INTERFACE_2 -#define CONF_DMAC_DES_INTERFACE_2 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_2 -#ifndef CONF_DMAC_SRCINC_2 -#define CONF_DMAC_SRCINC_2 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_2 -#ifndef CONF_DMAC_DSTINC_2 -#define CONF_DMAC_DSTINC_2 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_2 -#ifndef CONF_DMAC_TRANS_TYPE_2 -#define CONF_DMAC_TRANS_TYPE_2 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_2 -#ifndef CONF_DMAC_TRIGSRC_2 -#define CONF_DMAC_TRIGSRC_2 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_2 == 0 -#define CONF_DMAC_TYPE_2 0 -#define CONF_DMAC_DSYNC_2 0 -#elif CONF_DMAC_TRANS_TYPE_2 == 1 -#define CONF_DMAC_TYPE_2 1 -#define CONF_DMAC_DSYNC_2 0 -#elif CONF_DMAC_TRANS_TYPE_2 == 2 -#define CONF_DMAC_TYPE_2 1 -#define CONF_DMAC_DSYNC_2 1 -#endif - -#if CONF_DMAC_TRIGSRC_2 == 0xFF -#define CONF_DMAC_SWREQ_2 1 -#else -#define CONF_DMAC_SWREQ_2 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_2_SETTINGS == 1 && CONF_DMAC_BEATSIZE_2 != 2 && ((!CONF_DMAC_SRCINC_2) || (!CONF_DMAC_DSTINC_2))) -#if (!CONF_DMAC_SRCINC_2) -#define CONF_DMAC_SRC_STRIDE_2 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_2) -#define CONF_DMAC_DES_STRIDE_2 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_2 -#define CONF_DMAC_SRC_STRIDE_2 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_2 -#define CONF_DMAC_DES_STRIDE_2 0 -#endif - -// Channel 3 settings -// dmac_channel_3_settings -#ifndef CONF_DMAC_CHANNEL_3_SETTINGS -#define CONF_DMAC_CHANNEL_3_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_3 -#ifndef CONF_DMAC_BURSTSIZE_3 -#define CONF_DMAC_BURSTSIZE_3 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_3 -#ifndef CONF_DMAC_CHUNKSIZE_3 -#define CONF_DMAC_CHUNKSIZE_3 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_3 -#ifndef CONF_DMAC_BEATSIZE_3 -#define CONF_DMAC_BEATSIZE_3 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_3 -#ifndef CONF_DMAC_SRC_INTERFACE_3 -#define CONF_DMAC_SRC_INTERFACE_3 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_3 -#ifndef CONF_DMAC_DES_INTERFACE_3 -#define CONF_DMAC_DES_INTERFACE_3 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_3 -#ifndef CONF_DMAC_SRCINC_3 -#define CONF_DMAC_SRCINC_3 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_3 -#ifndef CONF_DMAC_DSTINC_3 -#define CONF_DMAC_DSTINC_3 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_3 -#ifndef CONF_DMAC_TRANS_TYPE_3 -#define CONF_DMAC_TRANS_TYPE_3 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_3 -#ifndef CONF_DMAC_TRIGSRC_3 -#define CONF_DMAC_TRIGSRC_3 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_3 == 0 -#define CONF_DMAC_TYPE_3 0 -#define CONF_DMAC_DSYNC_3 0 -#elif CONF_DMAC_TRANS_TYPE_3 == 1 -#define CONF_DMAC_TYPE_3 1 -#define CONF_DMAC_DSYNC_3 0 -#elif CONF_DMAC_TRANS_TYPE_3 == 2 -#define CONF_DMAC_TYPE_3 1 -#define CONF_DMAC_DSYNC_3 1 -#endif - -#if CONF_DMAC_TRIGSRC_3 == 0xFF -#define CONF_DMAC_SWREQ_3 1 -#else -#define CONF_DMAC_SWREQ_3 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_3_SETTINGS == 1 && CONF_DMAC_BEATSIZE_3 != 2 && ((!CONF_DMAC_SRCINC_3) || (!CONF_DMAC_DSTINC_3))) -#if (!CONF_DMAC_SRCINC_3) -#define CONF_DMAC_SRC_STRIDE_3 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_3) -#define CONF_DMAC_DES_STRIDE_3 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_3 -#define CONF_DMAC_SRC_STRIDE_3 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_3 -#define CONF_DMAC_DES_STRIDE_3 0 -#endif - -// Channel 4 settings -// dmac_channel_4_settings -#ifndef CONF_DMAC_CHANNEL_4_SETTINGS -#define CONF_DMAC_CHANNEL_4_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_4 -#ifndef CONF_DMAC_BURSTSIZE_4 -#define CONF_DMAC_BURSTSIZE_4 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_4 -#ifndef CONF_DMAC_CHUNKSIZE_4 -#define CONF_DMAC_CHUNKSIZE_4 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_4 -#ifndef CONF_DMAC_BEATSIZE_4 -#define CONF_DMAC_BEATSIZE_4 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_4 -#ifndef CONF_DMAC_SRC_INTERFACE_4 -#define CONF_DMAC_SRC_INTERFACE_4 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_4 -#ifndef CONF_DMAC_DES_INTERFACE_4 -#define CONF_DMAC_DES_INTERFACE_4 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_4 -#ifndef CONF_DMAC_SRCINC_4 -#define CONF_DMAC_SRCINC_4 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_4 -#ifndef CONF_DMAC_DSTINC_4 -#define CONF_DMAC_DSTINC_4 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_4 -#ifndef CONF_DMAC_TRANS_TYPE_4 -#define CONF_DMAC_TRANS_TYPE_4 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_4 -#ifndef CONF_DMAC_TRIGSRC_4 -#define CONF_DMAC_TRIGSRC_4 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_4 == 0 -#define CONF_DMAC_TYPE_4 0 -#define CONF_DMAC_DSYNC_4 0 -#elif CONF_DMAC_TRANS_TYPE_4 == 1 -#define CONF_DMAC_TYPE_4 1 -#define CONF_DMAC_DSYNC_4 0 -#elif CONF_DMAC_TRANS_TYPE_4 == 2 -#define CONF_DMAC_TYPE_4 1 -#define CONF_DMAC_DSYNC_4 1 -#endif - -#if CONF_DMAC_TRIGSRC_4 == 0xFF -#define CONF_DMAC_SWREQ_4 1 -#else -#define CONF_DMAC_SWREQ_4 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_4_SETTINGS == 1 && CONF_DMAC_BEATSIZE_4 != 2 && ((!CONF_DMAC_SRCINC_4) || (!CONF_DMAC_DSTINC_4))) -#if (!CONF_DMAC_SRCINC_4) -#define CONF_DMAC_SRC_STRIDE_4 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_4) -#define CONF_DMAC_DES_STRIDE_4 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_4 -#define CONF_DMAC_SRC_STRIDE_4 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_4 -#define CONF_DMAC_DES_STRIDE_4 0 -#endif - -// Channel 5 settings -// dmac_channel_5_settings -#ifndef CONF_DMAC_CHANNEL_5_SETTINGS -#define CONF_DMAC_CHANNEL_5_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_5 -#ifndef CONF_DMAC_BURSTSIZE_5 -#define CONF_DMAC_BURSTSIZE_5 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_5 -#ifndef CONF_DMAC_CHUNKSIZE_5 -#define CONF_DMAC_CHUNKSIZE_5 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_5 -#ifndef CONF_DMAC_BEATSIZE_5 -#define CONF_DMAC_BEATSIZE_5 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_5 -#ifndef CONF_DMAC_SRC_INTERFACE_5 -#define CONF_DMAC_SRC_INTERFACE_5 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_5 -#ifndef CONF_DMAC_DES_INTERFACE_5 -#define CONF_DMAC_DES_INTERFACE_5 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_5 -#ifndef CONF_DMAC_SRCINC_5 -#define CONF_DMAC_SRCINC_5 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_5 -#ifndef CONF_DMAC_DSTINC_5 -#define CONF_DMAC_DSTINC_5 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_5 -#ifndef CONF_DMAC_TRANS_TYPE_5 -#define CONF_DMAC_TRANS_TYPE_5 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_5 -#ifndef CONF_DMAC_TRIGSRC_5 -#define CONF_DMAC_TRIGSRC_5 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_5 == 0 -#define CONF_DMAC_TYPE_5 0 -#define CONF_DMAC_DSYNC_5 0 -#elif CONF_DMAC_TRANS_TYPE_5 == 1 -#define CONF_DMAC_TYPE_5 1 -#define CONF_DMAC_DSYNC_5 0 -#elif CONF_DMAC_TRANS_TYPE_5 == 2 -#define CONF_DMAC_TYPE_5 1 -#define CONF_DMAC_DSYNC_5 1 -#endif - -#if CONF_DMAC_TRIGSRC_5 == 0xFF -#define CONF_DMAC_SWREQ_5 1 -#else -#define CONF_DMAC_SWREQ_5 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_5_SETTINGS == 1 && CONF_DMAC_BEATSIZE_5 != 2 && ((!CONF_DMAC_SRCINC_5) || (!CONF_DMAC_DSTINC_5))) -#if (!CONF_DMAC_SRCINC_5) -#define CONF_DMAC_SRC_STRIDE_5 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_5) -#define CONF_DMAC_DES_STRIDE_5 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_5 -#define CONF_DMAC_SRC_STRIDE_5 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_5 -#define CONF_DMAC_DES_STRIDE_5 0 -#endif - -// Channel 6 settings -// dmac_channel_6_settings -#ifndef CONF_DMAC_CHANNEL_6_SETTINGS -#define CONF_DMAC_CHANNEL_6_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_6 -#ifndef CONF_DMAC_BURSTSIZE_6 -#define CONF_DMAC_BURSTSIZE_6 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_6 -#ifndef CONF_DMAC_CHUNKSIZE_6 -#define CONF_DMAC_CHUNKSIZE_6 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_6 -#ifndef CONF_DMAC_BEATSIZE_6 -#define CONF_DMAC_BEATSIZE_6 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_6 -#ifndef CONF_DMAC_SRC_INTERFACE_6 -#define CONF_DMAC_SRC_INTERFACE_6 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_6 -#ifndef CONF_DMAC_DES_INTERFACE_6 -#define CONF_DMAC_DES_INTERFACE_6 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_6 -#ifndef CONF_DMAC_SRCINC_6 -#define CONF_DMAC_SRCINC_6 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_6 -#ifndef CONF_DMAC_DSTINC_6 -#define CONF_DMAC_DSTINC_6 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_6 -#ifndef CONF_DMAC_TRANS_TYPE_6 -#define CONF_DMAC_TRANS_TYPE_6 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_6 -#ifndef CONF_DMAC_TRIGSRC_6 -#define CONF_DMAC_TRIGSRC_6 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_6 == 0 -#define CONF_DMAC_TYPE_6 0 -#define CONF_DMAC_DSYNC_6 0 -#elif CONF_DMAC_TRANS_TYPE_6 == 1 -#define CONF_DMAC_TYPE_6 1 -#define CONF_DMAC_DSYNC_6 0 -#elif CONF_DMAC_TRANS_TYPE_6 == 2 -#define CONF_DMAC_TYPE_6 1 -#define CONF_DMAC_DSYNC_6 1 -#endif - -#if CONF_DMAC_TRIGSRC_6 == 0xFF -#define CONF_DMAC_SWREQ_6 1 -#else -#define CONF_DMAC_SWREQ_6 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_6_SETTINGS == 1 && CONF_DMAC_BEATSIZE_6 != 2 && ((!CONF_DMAC_SRCINC_6) || (!CONF_DMAC_DSTINC_6))) -#if (!CONF_DMAC_SRCINC_6) -#define CONF_DMAC_SRC_STRIDE_6 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_6) -#define CONF_DMAC_DES_STRIDE_6 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_6 -#define CONF_DMAC_SRC_STRIDE_6 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_6 -#define CONF_DMAC_DES_STRIDE_6 0 -#endif - -// Channel 7 settings -// dmac_channel_7_settings -#ifndef CONF_DMAC_CHANNEL_7_SETTINGS -#define CONF_DMAC_CHANNEL_7_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_7 -#ifndef CONF_DMAC_BURSTSIZE_7 -#define CONF_DMAC_BURSTSIZE_7 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_7 -#ifndef CONF_DMAC_CHUNKSIZE_7 -#define CONF_DMAC_CHUNKSIZE_7 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_7 -#ifndef CONF_DMAC_BEATSIZE_7 -#define CONF_DMAC_BEATSIZE_7 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_7 -#ifndef CONF_DMAC_SRC_INTERFACE_7 -#define CONF_DMAC_SRC_INTERFACE_7 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_7 -#ifndef CONF_DMAC_DES_INTERFACE_7 -#define CONF_DMAC_DES_INTERFACE_7 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_7 -#ifndef CONF_DMAC_SRCINC_7 -#define CONF_DMAC_SRCINC_7 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_7 -#ifndef CONF_DMAC_DSTINC_7 -#define CONF_DMAC_DSTINC_7 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_7 -#ifndef CONF_DMAC_TRANS_TYPE_7 -#define CONF_DMAC_TRANS_TYPE_7 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_7 -#ifndef CONF_DMAC_TRIGSRC_7 -#define CONF_DMAC_TRIGSRC_7 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_7 == 0 -#define CONF_DMAC_TYPE_7 0 -#define CONF_DMAC_DSYNC_7 0 -#elif CONF_DMAC_TRANS_TYPE_7 == 1 -#define CONF_DMAC_TYPE_7 1 -#define CONF_DMAC_DSYNC_7 0 -#elif CONF_DMAC_TRANS_TYPE_7 == 2 -#define CONF_DMAC_TYPE_7 1 -#define CONF_DMAC_DSYNC_7 1 -#endif - -#if CONF_DMAC_TRIGSRC_7 == 0xFF -#define CONF_DMAC_SWREQ_7 1 -#else -#define CONF_DMAC_SWREQ_7 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_7_SETTINGS == 1 && CONF_DMAC_BEATSIZE_7 != 2 && ((!CONF_DMAC_SRCINC_7) || (!CONF_DMAC_DSTINC_7))) -#if (!CONF_DMAC_SRCINC_7) -#define CONF_DMAC_SRC_STRIDE_7 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_7) -#define CONF_DMAC_DES_STRIDE_7 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_7 -#define CONF_DMAC_SRC_STRIDE_7 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_7 -#define CONF_DMAC_DES_STRIDE_7 0 -#endif - -// Channel 8 settings -// dmac_channel_8_settings -#ifndef CONF_DMAC_CHANNEL_8_SETTINGS -#define CONF_DMAC_CHANNEL_8_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_8 -#ifndef CONF_DMAC_BURSTSIZE_8 -#define CONF_DMAC_BURSTSIZE_8 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_8 -#ifndef CONF_DMAC_CHUNKSIZE_8 -#define CONF_DMAC_CHUNKSIZE_8 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_8 -#ifndef CONF_DMAC_BEATSIZE_8 -#define CONF_DMAC_BEATSIZE_8 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_8 -#ifndef CONF_DMAC_SRC_INTERFACE_8 -#define CONF_DMAC_SRC_INTERFACE_8 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_8 -#ifndef CONF_DMAC_DES_INTERFACE_8 -#define CONF_DMAC_DES_INTERFACE_8 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_8 -#ifndef CONF_DMAC_SRCINC_8 -#define CONF_DMAC_SRCINC_8 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_8 -#ifndef CONF_DMAC_DSTINC_8 -#define CONF_DMAC_DSTINC_8 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_8 -#ifndef CONF_DMAC_TRANS_TYPE_8 -#define CONF_DMAC_TRANS_TYPE_8 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_8 -#ifndef CONF_DMAC_TRIGSRC_8 -#define CONF_DMAC_TRIGSRC_8 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_8 == 0 -#define CONF_DMAC_TYPE_8 0 -#define CONF_DMAC_DSYNC_8 0 -#elif CONF_DMAC_TRANS_TYPE_8 == 1 -#define CONF_DMAC_TYPE_8 1 -#define CONF_DMAC_DSYNC_8 0 -#elif CONF_DMAC_TRANS_TYPE_8 == 2 -#define CONF_DMAC_TYPE_8 1 -#define CONF_DMAC_DSYNC_8 1 -#endif - -#if CONF_DMAC_TRIGSRC_8 == 0xFF -#define CONF_DMAC_SWREQ_8 1 -#else -#define CONF_DMAC_SWREQ_8 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_8_SETTINGS == 1 && CONF_DMAC_BEATSIZE_8 != 2 && ((!CONF_DMAC_SRCINC_8) || (!CONF_DMAC_DSTINC_8))) -#if (!CONF_DMAC_SRCINC_8) -#define CONF_DMAC_SRC_STRIDE_8 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_8) -#define CONF_DMAC_DES_STRIDE_8 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_8 -#define CONF_DMAC_SRC_STRIDE_8 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_8 -#define CONF_DMAC_DES_STRIDE_8 0 -#endif - -// Channel 9 settings -// dmac_channel_9_settings -#ifndef CONF_DMAC_CHANNEL_9_SETTINGS -#define CONF_DMAC_CHANNEL_9_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_9 -#ifndef CONF_DMAC_BURSTSIZE_9 -#define CONF_DMAC_BURSTSIZE_9 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_9 -#ifndef CONF_DMAC_CHUNKSIZE_9 -#define CONF_DMAC_CHUNKSIZE_9 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_9 -#ifndef CONF_DMAC_BEATSIZE_9 -#define CONF_DMAC_BEATSIZE_9 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_9 -#ifndef CONF_DMAC_SRC_INTERFACE_9 -#define CONF_DMAC_SRC_INTERFACE_9 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_9 -#ifndef CONF_DMAC_DES_INTERFACE_9 -#define CONF_DMAC_DES_INTERFACE_9 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_9 -#ifndef CONF_DMAC_SRCINC_9 -#define CONF_DMAC_SRCINC_9 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_9 -#ifndef CONF_DMAC_DSTINC_9 -#define CONF_DMAC_DSTINC_9 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_9 -#ifndef CONF_DMAC_TRANS_TYPE_9 -#define CONF_DMAC_TRANS_TYPE_9 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_9 -#ifndef CONF_DMAC_TRIGSRC_9 -#define CONF_DMAC_TRIGSRC_9 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_9 == 0 -#define CONF_DMAC_TYPE_9 0 -#define CONF_DMAC_DSYNC_9 0 -#elif CONF_DMAC_TRANS_TYPE_9 == 1 -#define CONF_DMAC_TYPE_9 1 -#define CONF_DMAC_DSYNC_9 0 -#elif CONF_DMAC_TRANS_TYPE_9 == 2 -#define CONF_DMAC_TYPE_9 1 -#define CONF_DMAC_DSYNC_9 1 -#endif - -#if CONF_DMAC_TRIGSRC_9 == 0xFF -#define CONF_DMAC_SWREQ_9 1 -#else -#define CONF_DMAC_SWREQ_9 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_9_SETTINGS == 1 && CONF_DMAC_BEATSIZE_9 != 2 && ((!CONF_DMAC_SRCINC_9) || (!CONF_DMAC_DSTINC_9))) -#if (!CONF_DMAC_SRCINC_9) -#define CONF_DMAC_SRC_STRIDE_9 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_9) -#define CONF_DMAC_DES_STRIDE_9 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_9 -#define CONF_DMAC_SRC_STRIDE_9 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_9 -#define CONF_DMAC_DES_STRIDE_9 0 -#endif - -// Channel 10 settings -// dmac_channel_10_settings -#ifndef CONF_DMAC_CHANNEL_10_SETTINGS -#define CONF_DMAC_CHANNEL_10_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_10 -#ifndef CONF_DMAC_BURSTSIZE_10 -#define CONF_DMAC_BURSTSIZE_10 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_10 -#ifndef CONF_DMAC_CHUNKSIZE_10 -#define CONF_DMAC_CHUNKSIZE_10 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_10 -#ifndef CONF_DMAC_BEATSIZE_10 -#define CONF_DMAC_BEATSIZE_10 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_10 -#ifndef CONF_DMAC_SRC_INTERFACE_10 -#define CONF_DMAC_SRC_INTERFACE_10 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_10 -#ifndef CONF_DMAC_DES_INTERFACE_10 -#define CONF_DMAC_DES_INTERFACE_10 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_10 -#ifndef CONF_DMAC_SRCINC_10 -#define CONF_DMAC_SRCINC_10 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_10 -#ifndef CONF_DMAC_DSTINC_10 -#define CONF_DMAC_DSTINC_10 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_10 -#ifndef CONF_DMAC_TRANS_TYPE_10 -#define CONF_DMAC_TRANS_TYPE_10 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_10 -#ifndef CONF_DMAC_TRIGSRC_10 -#define CONF_DMAC_TRIGSRC_10 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_10 == 0 -#define CONF_DMAC_TYPE_10 0 -#define CONF_DMAC_DSYNC_10 0 -#elif CONF_DMAC_TRANS_TYPE_10 == 1 -#define CONF_DMAC_TYPE_10 1 -#define CONF_DMAC_DSYNC_10 0 -#elif CONF_DMAC_TRANS_TYPE_10 == 2 -#define CONF_DMAC_TYPE_10 1 -#define CONF_DMAC_DSYNC_10 1 -#endif - -#if CONF_DMAC_TRIGSRC_10 == 0xFF -#define CONF_DMAC_SWREQ_10 1 -#else -#define CONF_DMAC_SWREQ_10 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_10_SETTINGS == 1 && CONF_DMAC_BEATSIZE_10 != 2 \ - && ((!CONF_DMAC_SRCINC_10) || (!CONF_DMAC_DSTINC_10))) -#if (!CONF_DMAC_SRCINC_10) -#define CONF_DMAC_SRC_STRIDE_10 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_10) -#define CONF_DMAC_DES_STRIDE_10 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_10 -#define CONF_DMAC_SRC_STRIDE_10 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_10 -#define CONF_DMAC_DES_STRIDE_10 0 -#endif - -// Channel 11 settings -// dmac_channel_11_settings -#ifndef CONF_DMAC_CHANNEL_11_SETTINGS -#define CONF_DMAC_CHANNEL_11_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_11 -#ifndef CONF_DMAC_BURSTSIZE_11 -#define CONF_DMAC_BURSTSIZE_11 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_11 -#ifndef CONF_DMAC_CHUNKSIZE_11 -#define CONF_DMAC_CHUNKSIZE_11 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_11 -#ifndef CONF_DMAC_BEATSIZE_11 -#define CONF_DMAC_BEATSIZE_11 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_11 -#ifndef CONF_DMAC_SRC_INTERFACE_11 -#define CONF_DMAC_SRC_INTERFACE_11 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_11 -#ifndef CONF_DMAC_DES_INTERFACE_11 -#define CONF_DMAC_DES_INTERFACE_11 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_11 -#ifndef CONF_DMAC_SRCINC_11 -#define CONF_DMAC_SRCINC_11 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_11 -#ifndef CONF_DMAC_DSTINC_11 -#define CONF_DMAC_DSTINC_11 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_11 -#ifndef CONF_DMAC_TRANS_TYPE_11 -#define CONF_DMAC_TRANS_TYPE_11 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_11 -#ifndef CONF_DMAC_TRIGSRC_11 -#define CONF_DMAC_TRIGSRC_11 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_11 == 0 -#define CONF_DMAC_TYPE_11 0 -#define CONF_DMAC_DSYNC_11 0 -#elif CONF_DMAC_TRANS_TYPE_11 == 1 -#define CONF_DMAC_TYPE_11 1 -#define CONF_DMAC_DSYNC_11 0 -#elif CONF_DMAC_TRANS_TYPE_11 == 2 -#define CONF_DMAC_TYPE_11 1 -#define CONF_DMAC_DSYNC_11 1 -#endif - -#if CONF_DMAC_TRIGSRC_11 == 0xFF -#define CONF_DMAC_SWREQ_11 1 -#else -#define CONF_DMAC_SWREQ_11 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_11_SETTINGS == 1 && CONF_DMAC_BEATSIZE_11 != 2 \ - && ((!CONF_DMAC_SRCINC_11) || (!CONF_DMAC_DSTINC_11))) -#if (!CONF_DMAC_SRCINC_11) -#define CONF_DMAC_SRC_STRIDE_11 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_11) -#define CONF_DMAC_DES_STRIDE_11 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_11 -#define CONF_DMAC_SRC_STRIDE_11 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_11 -#define CONF_DMAC_DES_STRIDE_11 0 -#endif - -// Channel 12 settings -// dmac_channel_12_settings -#ifndef CONF_DMAC_CHANNEL_12_SETTINGS -#define CONF_DMAC_CHANNEL_12_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_12 -#ifndef CONF_DMAC_BURSTSIZE_12 -#define CONF_DMAC_BURSTSIZE_12 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_12 -#ifndef CONF_DMAC_CHUNKSIZE_12 -#define CONF_DMAC_CHUNKSIZE_12 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_12 -#ifndef CONF_DMAC_BEATSIZE_12 -#define CONF_DMAC_BEATSIZE_12 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_12 -#ifndef CONF_DMAC_SRC_INTERFACE_12 -#define CONF_DMAC_SRC_INTERFACE_12 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_12 -#ifndef CONF_DMAC_DES_INTERFACE_12 -#define CONF_DMAC_DES_INTERFACE_12 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_12 -#ifndef CONF_DMAC_SRCINC_12 -#define CONF_DMAC_SRCINC_12 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_12 -#ifndef CONF_DMAC_DSTINC_12 -#define CONF_DMAC_DSTINC_12 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_12 -#ifndef CONF_DMAC_TRANS_TYPE_12 -#define CONF_DMAC_TRANS_TYPE_12 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_12 -#ifndef CONF_DMAC_TRIGSRC_12 -#define CONF_DMAC_TRIGSRC_12 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_12 == 0 -#define CONF_DMAC_TYPE_12 0 -#define CONF_DMAC_DSYNC_12 0 -#elif CONF_DMAC_TRANS_TYPE_12 == 1 -#define CONF_DMAC_TYPE_12 1 -#define CONF_DMAC_DSYNC_12 0 -#elif CONF_DMAC_TRANS_TYPE_12 == 2 -#define CONF_DMAC_TYPE_12 1 -#define CONF_DMAC_DSYNC_12 1 -#endif - -#if CONF_DMAC_TRIGSRC_12 == 0xFF -#define CONF_DMAC_SWREQ_12 1 -#else -#define CONF_DMAC_SWREQ_12 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_12_SETTINGS == 1 && CONF_DMAC_BEATSIZE_12 != 2 \ - && ((!CONF_DMAC_SRCINC_12) || (!CONF_DMAC_DSTINC_12))) -#if (!CONF_DMAC_SRCINC_12) -#define CONF_DMAC_SRC_STRIDE_12 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_12) -#define CONF_DMAC_DES_STRIDE_12 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_12 -#define CONF_DMAC_SRC_STRIDE_12 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_12 -#define CONF_DMAC_DES_STRIDE_12 0 -#endif - -// Channel 13 settings -// dmac_channel_13_settings -#ifndef CONF_DMAC_CHANNEL_13_SETTINGS -#define CONF_DMAC_CHANNEL_13_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_13 -#ifndef CONF_DMAC_BURSTSIZE_13 -#define CONF_DMAC_BURSTSIZE_13 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_13 -#ifndef CONF_DMAC_CHUNKSIZE_13 -#define CONF_DMAC_CHUNKSIZE_13 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_13 -#ifndef CONF_DMAC_BEATSIZE_13 -#define CONF_DMAC_BEATSIZE_13 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_13 -#ifndef CONF_DMAC_SRC_INTERFACE_13 -#define CONF_DMAC_SRC_INTERFACE_13 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_13 -#ifndef CONF_DMAC_DES_INTERFACE_13 -#define CONF_DMAC_DES_INTERFACE_13 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_13 -#ifndef CONF_DMAC_SRCINC_13 -#define CONF_DMAC_SRCINC_13 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_13 -#ifndef CONF_DMAC_DSTINC_13 -#define CONF_DMAC_DSTINC_13 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_13 -#ifndef CONF_DMAC_TRANS_TYPE_13 -#define CONF_DMAC_TRANS_TYPE_13 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_13 -#ifndef CONF_DMAC_TRIGSRC_13 -#define CONF_DMAC_TRIGSRC_13 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_13 == 0 -#define CONF_DMAC_TYPE_13 0 -#define CONF_DMAC_DSYNC_13 0 -#elif CONF_DMAC_TRANS_TYPE_13 == 1 -#define CONF_DMAC_TYPE_13 1 -#define CONF_DMAC_DSYNC_13 0 -#elif CONF_DMAC_TRANS_TYPE_13 == 2 -#define CONF_DMAC_TYPE_13 1 -#define CONF_DMAC_DSYNC_13 1 -#endif - -#if CONF_DMAC_TRIGSRC_13 == 0xFF -#define CONF_DMAC_SWREQ_13 1 -#else -#define CONF_DMAC_SWREQ_13 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_13_SETTINGS == 1 && CONF_DMAC_BEATSIZE_13 != 2 \ - && ((!CONF_DMAC_SRCINC_13) || (!CONF_DMAC_DSTINC_13))) -#if (!CONF_DMAC_SRCINC_13) -#define CONF_DMAC_SRC_STRIDE_13 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_13) -#define CONF_DMAC_DES_STRIDE_13 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_13 -#define CONF_DMAC_SRC_STRIDE_13 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_13 -#define CONF_DMAC_DES_STRIDE_13 0 -#endif - -// Channel 14 settings -// dmac_channel_14_settings -#ifndef CONF_DMAC_CHANNEL_14_SETTINGS -#define CONF_DMAC_CHANNEL_14_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_14 -#ifndef CONF_DMAC_BURSTSIZE_14 -#define CONF_DMAC_BURSTSIZE_14 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_14 -#ifndef CONF_DMAC_CHUNKSIZE_14 -#define CONF_DMAC_CHUNKSIZE_14 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_14 -#ifndef CONF_DMAC_BEATSIZE_14 -#define CONF_DMAC_BEATSIZE_14 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_14 -#ifndef CONF_DMAC_SRC_INTERFACE_14 -#define CONF_DMAC_SRC_INTERFACE_14 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_14 -#ifndef CONF_DMAC_DES_INTERFACE_14 -#define CONF_DMAC_DES_INTERFACE_14 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_14 -#ifndef CONF_DMAC_SRCINC_14 -#define CONF_DMAC_SRCINC_14 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_14 -#ifndef CONF_DMAC_DSTINC_14 -#define CONF_DMAC_DSTINC_14 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_14 -#ifndef CONF_DMAC_TRANS_TYPE_14 -#define CONF_DMAC_TRANS_TYPE_14 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_14 -#ifndef CONF_DMAC_TRIGSRC_14 -#define CONF_DMAC_TRIGSRC_14 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_14 == 0 -#define CONF_DMAC_TYPE_14 0 -#define CONF_DMAC_DSYNC_14 0 -#elif CONF_DMAC_TRANS_TYPE_14 == 1 -#define CONF_DMAC_TYPE_14 1 -#define CONF_DMAC_DSYNC_14 0 -#elif CONF_DMAC_TRANS_TYPE_14 == 2 -#define CONF_DMAC_TYPE_14 1 -#define CONF_DMAC_DSYNC_14 1 -#endif - -#if CONF_DMAC_TRIGSRC_14 == 0xFF -#define CONF_DMAC_SWREQ_14 1 -#else -#define CONF_DMAC_SWREQ_14 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_14_SETTINGS == 1 && CONF_DMAC_BEATSIZE_14 != 2 \ - && ((!CONF_DMAC_SRCINC_14) || (!CONF_DMAC_DSTINC_14))) -#if (!CONF_DMAC_SRCINC_14) -#define CONF_DMAC_SRC_STRIDE_14 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_14) -#define CONF_DMAC_DES_STRIDE_14 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_14 -#define CONF_DMAC_SRC_STRIDE_14 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_14 -#define CONF_DMAC_DES_STRIDE_14 0 -#endif - -// Channel 15 settings -// dmac_channel_15_settings -#ifndef CONF_DMAC_CHANNEL_15_SETTINGS -#define CONF_DMAC_CHANNEL_15_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_15 -#ifndef CONF_DMAC_BURSTSIZE_15 -#define CONF_DMAC_BURSTSIZE_15 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_15 -#ifndef CONF_DMAC_CHUNKSIZE_15 -#define CONF_DMAC_CHUNKSIZE_15 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_15 -#ifndef CONF_DMAC_BEATSIZE_15 -#define CONF_DMAC_BEATSIZE_15 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_15 -#ifndef CONF_DMAC_SRC_INTERFACE_15 -#define CONF_DMAC_SRC_INTERFACE_15 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_15 -#ifndef CONF_DMAC_DES_INTERFACE_15 -#define CONF_DMAC_DES_INTERFACE_15 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_15 -#ifndef CONF_DMAC_SRCINC_15 -#define CONF_DMAC_SRCINC_15 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_15 -#ifndef CONF_DMAC_DSTINC_15 -#define CONF_DMAC_DSTINC_15 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_15 -#ifndef CONF_DMAC_TRANS_TYPE_15 -#define CONF_DMAC_TRANS_TYPE_15 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_15 -#ifndef CONF_DMAC_TRIGSRC_15 -#define CONF_DMAC_TRIGSRC_15 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_15 == 0 -#define CONF_DMAC_TYPE_15 0 -#define CONF_DMAC_DSYNC_15 0 -#elif CONF_DMAC_TRANS_TYPE_15 == 1 -#define CONF_DMAC_TYPE_15 1 -#define CONF_DMAC_DSYNC_15 0 -#elif CONF_DMAC_TRANS_TYPE_15 == 2 -#define CONF_DMAC_TYPE_15 1 -#define CONF_DMAC_DSYNC_15 1 -#endif - -#if CONF_DMAC_TRIGSRC_15 == 0xFF -#define CONF_DMAC_SWREQ_15 1 -#else -#define CONF_DMAC_SWREQ_15 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_15_SETTINGS == 1 && CONF_DMAC_BEATSIZE_15 != 2 \ - && ((!CONF_DMAC_SRCINC_15) || (!CONF_DMAC_DSTINC_15))) -#if (!CONF_DMAC_SRCINC_15) -#define CONF_DMAC_SRC_STRIDE_15 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_15) -#define CONF_DMAC_DES_STRIDE_15 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_15 -#define CONF_DMAC_SRC_STRIDE_15 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_15 -#define CONF_DMAC_DES_STRIDE_15 0 -#endif - -// Channel 16 settings -// dmac_channel_16_settings -#ifndef CONF_DMAC_CHANNEL_16_SETTINGS -#define CONF_DMAC_CHANNEL_16_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_16 -#ifndef CONF_DMAC_BURSTSIZE_16 -#define CONF_DMAC_BURSTSIZE_16 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_16 -#ifndef CONF_DMAC_CHUNKSIZE_16 -#define CONF_DMAC_CHUNKSIZE_16 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_16 -#ifndef CONF_DMAC_BEATSIZE_16 -#define CONF_DMAC_BEATSIZE_16 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_16 -#ifndef CONF_DMAC_SRC_INTERFACE_16 -#define CONF_DMAC_SRC_INTERFACE_16 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_16 -#ifndef CONF_DMAC_DES_INTERFACE_16 -#define CONF_DMAC_DES_INTERFACE_16 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_16 -#ifndef CONF_DMAC_SRCINC_16 -#define CONF_DMAC_SRCINC_16 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_16 -#ifndef CONF_DMAC_DSTINC_16 -#define CONF_DMAC_DSTINC_16 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_16 -#ifndef CONF_DMAC_TRANS_TYPE_16 -#define CONF_DMAC_TRANS_TYPE_16 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_16 -#ifndef CONF_DMAC_TRIGSRC_16 -#define CONF_DMAC_TRIGSRC_16 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_16 == 0 -#define CONF_DMAC_TYPE_16 0 -#define CONF_DMAC_DSYNC_16 0 -#elif CONF_DMAC_TRANS_TYPE_16 == 1 -#define CONF_DMAC_TYPE_16 1 -#define CONF_DMAC_DSYNC_16 0 -#elif CONF_DMAC_TRANS_TYPE_16 == 2 -#define CONF_DMAC_TYPE_16 1 -#define CONF_DMAC_DSYNC_16 1 -#endif - -#if CONF_DMAC_TRIGSRC_16 == 0xFF -#define CONF_DMAC_SWREQ_16 1 -#else -#define CONF_DMAC_SWREQ_16 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_16_SETTINGS == 1 && CONF_DMAC_BEATSIZE_16 != 2 \ - && ((!CONF_DMAC_SRCINC_16) || (!CONF_DMAC_DSTINC_16))) -#if (!CONF_DMAC_SRCINC_16) -#define CONF_DMAC_SRC_STRIDE_16 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_16) -#define CONF_DMAC_DES_STRIDE_16 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_16 -#define CONF_DMAC_SRC_STRIDE_16 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_16 -#define CONF_DMAC_DES_STRIDE_16 0 -#endif - -// Channel 17 settings -// dmac_channel_17_settings -#ifndef CONF_DMAC_CHANNEL_17_SETTINGS -#define CONF_DMAC_CHANNEL_17_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_17 -#ifndef CONF_DMAC_BURSTSIZE_17 -#define CONF_DMAC_BURSTSIZE_17 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_17 -#ifndef CONF_DMAC_CHUNKSIZE_17 -#define CONF_DMAC_CHUNKSIZE_17 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_17 -#ifndef CONF_DMAC_BEATSIZE_17 -#define CONF_DMAC_BEATSIZE_17 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_17 -#ifndef CONF_DMAC_SRC_INTERFACE_17 -#define CONF_DMAC_SRC_INTERFACE_17 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_17 -#ifndef CONF_DMAC_DES_INTERFACE_17 -#define CONF_DMAC_DES_INTERFACE_17 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_17 -#ifndef CONF_DMAC_SRCINC_17 -#define CONF_DMAC_SRCINC_17 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_17 -#ifndef CONF_DMAC_DSTINC_17 -#define CONF_DMAC_DSTINC_17 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_17 -#ifndef CONF_DMAC_TRANS_TYPE_17 -#define CONF_DMAC_TRANS_TYPE_17 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_17 -#ifndef CONF_DMAC_TRIGSRC_17 -#define CONF_DMAC_TRIGSRC_17 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_17 == 0 -#define CONF_DMAC_TYPE_17 0 -#define CONF_DMAC_DSYNC_17 0 -#elif CONF_DMAC_TRANS_TYPE_17 == 1 -#define CONF_DMAC_TYPE_17 1 -#define CONF_DMAC_DSYNC_17 0 -#elif CONF_DMAC_TRANS_TYPE_17 == 2 -#define CONF_DMAC_TYPE_17 1 -#define CONF_DMAC_DSYNC_17 1 -#endif - -#if CONF_DMAC_TRIGSRC_17 == 0xFF -#define CONF_DMAC_SWREQ_17 1 -#else -#define CONF_DMAC_SWREQ_17 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_17_SETTINGS == 1 && CONF_DMAC_BEATSIZE_17 != 2 \ - && ((!CONF_DMAC_SRCINC_17) || (!CONF_DMAC_DSTINC_17))) -#if (!CONF_DMAC_SRCINC_17) -#define CONF_DMAC_SRC_STRIDE_17 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_17) -#define CONF_DMAC_DES_STRIDE_17 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_17 -#define CONF_DMAC_SRC_STRIDE_17 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_17 -#define CONF_DMAC_DES_STRIDE_17 0 -#endif - -// Channel 18 settings -// dmac_channel_18_settings -#ifndef CONF_DMAC_CHANNEL_18_SETTINGS -#define CONF_DMAC_CHANNEL_18_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_18 -#ifndef CONF_DMAC_BURSTSIZE_18 -#define CONF_DMAC_BURSTSIZE_18 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_18 -#ifndef CONF_DMAC_CHUNKSIZE_18 -#define CONF_DMAC_CHUNKSIZE_18 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_18 -#ifndef CONF_DMAC_BEATSIZE_18 -#define CONF_DMAC_BEATSIZE_18 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_18 -#ifndef CONF_DMAC_SRC_INTERFACE_18 -#define CONF_DMAC_SRC_INTERFACE_18 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_18 -#ifndef CONF_DMAC_DES_INTERFACE_18 -#define CONF_DMAC_DES_INTERFACE_18 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_18 -#ifndef CONF_DMAC_SRCINC_18 -#define CONF_DMAC_SRCINC_18 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_18 -#ifndef CONF_DMAC_DSTINC_18 -#define CONF_DMAC_DSTINC_18 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_18 -#ifndef CONF_DMAC_TRANS_TYPE_18 -#define CONF_DMAC_TRANS_TYPE_18 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_18 -#ifndef CONF_DMAC_TRIGSRC_18 -#define CONF_DMAC_TRIGSRC_18 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_18 == 0 -#define CONF_DMAC_TYPE_18 0 -#define CONF_DMAC_DSYNC_18 0 -#elif CONF_DMAC_TRANS_TYPE_18 == 1 -#define CONF_DMAC_TYPE_18 1 -#define CONF_DMAC_DSYNC_18 0 -#elif CONF_DMAC_TRANS_TYPE_18 == 2 -#define CONF_DMAC_TYPE_18 1 -#define CONF_DMAC_DSYNC_18 1 -#endif - -#if CONF_DMAC_TRIGSRC_18 == 0xFF -#define CONF_DMAC_SWREQ_18 1 -#else -#define CONF_DMAC_SWREQ_18 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_18_SETTINGS == 1 && CONF_DMAC_BEATSIZE_18 != 2 \ - && ((!CONF_DMAC_SRCINC_18) || (!CONF_DMAC_DSTINC_18))) -#if (!CONF_DMAC_SRCINC_18) -#define CONF_DMAC_SRC_STRIDE_18 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_18) -#define CONF_DMAC_DES_STRIDE_18 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_18 -#define CONF_DMAC_SRC_STRIDE_18 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_18 -#define CONF_DMAC_DES_STRIDE_18 0 -#endif - -// Channel 19 settings -// dmac_channel_19_settings -#ifndef CONF_DMAC_CHANNEL_19_SETTINGS -#define CONF_DMAC_CHANNEL_19_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_19 -#ifndef CONF_DMAC_BURSTSIZE_19 -#define CONF_DMAC_BURSTSIZE_19 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_19 -#ifndef CONF_DMAC_CHUNKSIZE_19 -#define CONF_DMAC_CHUNKSIZE_19 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_19 -#ifndef CONF_DMAC_BEATSIZE_19 -#define CONF_DMAC_BEATSIZE_19 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_19 -#ifndef CONF_DMAC_SRC_INTERFACE_19 -#define CONF_DMAC_SRC_INTERFACE_19 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_19 -#ifndef CONF_DMAC_DES_INTERFACE_19 -#define CONF_DMAC_DES_INTERFACE_19 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_19 -#ifndef CONF_DMAC_SRCINC_19 -#define CONF_DMAC_SRCINC_19 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_19 -#ifndef CONF_DMAC_DSTINC_19 -#define CONF_DMAC_DSTINC_19 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_19 -#ifndef CONF_DMAC_TRANS_TYPE_19 -#define CONF_DMAC_TRANS_TYPE_19 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_19 -#ifndef CONF_DMAC_TRIGSRC_19 -#define CONF_DMAC_TRIGSRC_19 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_19 == 0 -#define CONF_DMAC_TYPE_19 0 -#define CONF_DMAC_DSYNC_19 0 -#elif CONF_DMAC_TRANS_TYPE_19 == 1 -#define CONF_DMAC_TYPE_19 1 -#define CONF_DMAC_DSYNC_19 0 -#elif CONF_DMAC_TRANS_TYPE_19 == 2 -#define CONF_DMAC_TYPE_19 1 -#define CONF_DMAC_DSYNC_19 1 -#endif - -#if CONF_DMAC_TRIGSRC_19 == 0xFF -#define CONF_DMAC_SWREQ_19 1 -#else -#define CONF_DMAC_SWREQ_19 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_19_SETTINGS == 1 && CONF_DMAC_BEATSIZE_19 != 2 \ - && ((!CONF_DMAC_SRCINC_19) || (!CONF_DMAC_DSTINC_19))) -#if (!CONF_DMAC_SRCINC_19) -#define CONF_DMAC_SRC_STRIDE_19 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_19) -#define CONF_DMAC_DES_STRIDE_19 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_19 -#define CONF_DMAC_SRC_STRIDE_19 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_19 -#define CONF_DMAC_DES_STRIDE_19 0 -#endif - -// Channel 20 settings -// dmac_channel_20_settings -#ifndef CONF_DMAC_CHANNEL_20_SETTINGS -#define CONF_DMAC_CHANNEL_20_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_20 -#ifndef CONF_DMAC_BURSTSIZE_20 -#define CONF_DMAC_BURSTSIZE_20 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_20 -#ifndef CONF_DMAC_CHUNKSIZE_20 -#define CONF_DMAC_CHUNKSIZE_20 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_20 -#ifndef CONF_DMAC_BEATSIZE_20 -#define CONF_DMAC_BEATSIZE_20 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_20 -#ifndef CONF_DMAC_SRC_INTERFACE_20 -#define CONF_DMAC_SRC_INTERFACE_20 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_20 -#ifndef CONF_DMAC_DES_INTERFACE_20 -#define CONF_DMAC_DES_INTERFACE_20 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_20 -#ifndef CONF_DMAC_SRCINC_20 -#define CONF_DMAC_SRCINC_20 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_20 -#ifndef CONF_DMAC_DSTINC_20 -#define CONF_DMAC_DSTINC_20 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_20 -#ifndef CONF_DMAC_TRANS_TYPE_20 -#define CONF_DMAC_TRANS_TYPE_20 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_20 -#ifndef CONF_DMAC_TRIGSRC_20 -#define CONF_DMAC_TRIGSRC_20 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_20 == 0 -#define CONF_DMAC_TYPE_20 0 -#define CONF_DMAC_DSYNC_20 0 -#elif CONF_DMAC_TRANS_TYPE_20 == 1 -#define CONF_DMAC_TYPE_20 1 -#define CONF_DMAC_DSYNC_20 0 -#elif CONF_DMAC_TRANS_TYPE_20 == 2 -#define CONF_DMAC_TYPE_20 1 -#define CONF_DMAC_DSYNC_20 1 -#endif - -#if CONF_DMAC_TRIGSRC_20 == 0xFF -#define CONF_DMAC_SWREQ_20 1 -#else -#define CONF_DMAC_SWREQ_20 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_20_SETTINGS == 1 && CONF_DMAC_BEATSIZE_20 != 2 \ - && ((!CONF_DMAC_SRCINC_20) || (!CONF_DMAC_DSTINC_20))) -#if (!CONF_DMAC_SRCINC_20) -#define CONF_DMAC_SRC_STRIDE_20 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_20) -#define CONF_DMAC_DES_STRIDE_20 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_20 -#define CONF_DMAC_SRC_STRIDE_20 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_20 -#define CONF_DMAC_DES_STRIDE_20 0 -#endif - -// Channel 21 settings -// dmac_channel_21_settings -#ifndef CONF_DMAC_CHANNEL_21_SETTINGS -#define CONF_DMAC_CHANNEL_21_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_21 -#ifndef CONF_DMAC_BURSTSIZE_21 -#define CONF_DMAC_BURSTSIZE_21 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_21 -#ifndef CONF_DMAC_CHUNKSIZE_21 -#define CONF_DMAC_CHUNKSIZE_21 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_21 -#ifndef CONF_DMAC_BEATSIZE_21 -#define CONF_DMAC_BEATSIZE_21 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_21 -#ifndef CONF_DMAC_SRC_INTERFACE_21 -#define CONF_DMAC_SRC_INTERFACE_21 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_21 -#ifndef CONF_DMAC_DES_INTERFACE_21 -#define CONF_DMAC_DES_INTERFACE_21 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_21 -#ifndef CONF_DMAC_SRCINC_21 -#define CONF_DMAC_SRCINC_21 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_21 -#ifndef CONF_DMAC_DSTINC_21 -#define CONF_DMAC_DSTINC_21 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_21 -#ifndef CONF_DMAC_TRANS_TYPE_21 -#define CONF_DMAC_TRANS_TYPE_21 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_21 -#ifndef CONF_DMAC_TRIGSRC_21 -#define CONF_DMAC_TRIGSRC_21 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_21 == 0 -#define CONF_DMAC_TYPE_21 0 -#define CONF_DMAC_DSYNC_21 0 -#elif CONF_DMAC_TRANS_TYPE_21 == 1 -#define CONF_DMAC_TYPE_21 1 -#define CONF_DMAC_DSYNC_21 0 -#elif CONF_DMAC_TRANS_TYPE_21 == 2 -#define CONF_DMAC_TYPE_21 1 -#define CONF_DMAC_DSYNC_21 1 -#endif - -#if CONF_DMAC_TRIGSRC_21 == 0xFF -#define CONF_DMAC_SWREQ_21 1 -#else -#define CONF_DMAC_SWREQ_21 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_21_SETTINGS == 1 && CONF_DMAC_BEATSIZE_21 != 2 \ - && ((!CONF_DMAC_SRCINC_21) || (!CONF_DMAC_DSTINC_21))) -#if (!CONF_DMAC_SRCINC_21) -#define CONF_DMAC_SRC_STRIDE_21 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_21) -#define CONF_DMAC_DES_STRIDE_21 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_21 -#define CONF_DMAC_SRC_STRIDE_21 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_21 -#define CONF_DMAC_DES_STRIDE_21 0 -#endif - -// Channel 22 settings -// dmac_channel_22_settings -#ifndef CONF_DMAC_CHANNEL_22_SETTINGS -#define CONF_DMAC_CHANNEL_22_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_22 -#ifndef CONF_DMAC_BURSTSIZE_22 -#define CONF_DMAC_BURSTSIZE_22 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_22 -#ifndef CONF_DMAC_CHUNKSIZE_22 -#define CONF_DMAC_CHUNKSIZE_22 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_22 -#ifndef CONF_DMAC_BEATSIZE_22 -#define CONF_DMAC_BEATSIZE_22 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_22 -#ifndef CONF_DMAC_SRC_INTERFACE_22 -#define CONF_DMAC_SRC_INTERFACE_22 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_22 -#ifndef CONF_DMAC_DES_INTERFACE_22 -#define CONF_DMAC_DES_INTERFACE_22 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_22 -#ifndef CONF_DMAC_SRCINC_22 -#define CONF_DMAC_SRCINC_22 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_22 -#ifndef CONF_DMAC_DSTINC_22 -#define CONF_DMAC_DSTINC_22 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_22 -#ifndef CONF_DMAC_TRANS_TYPE_22 -#define CONF_DMAC_TRANS_TYPE_22 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_22 -#ifndef CONF_DMAC_TRIGSRC_22 -#define CONF_DMAC_TRIGSRC_22 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_22 == 0 -#define CONF_DMAC_TYPE_22 0 -#define CONF_DMAC_DSYNC_22 0 -#elif CONF_DMAC_TRANS_TYPE_22 == 1 -#define CONF_DMAC_TYPE_22 1 -#define CONF_DMAC_DSYNC_22 0 -#elif CONF_DMAC_TRANS_TYPE_22 == 2 -#define CONF_DMAC_TYPE_22 1 -#define CONF_DMAC_DSYNC_22 1 -#endif - -#if CONF_DMAC_TRIGSRC_22 == 0xFF -#define CONF_DMAC_SWREQ_22 1 -#else -#define CONF_DMAC_SWREQ_22 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_22_SETTINGS == 1 && CONF_DMAC_BEATSIZE_22 != 2 \ - && ((!CONF_DMAC_SRCINC_22) || (!CONF_DMAC_DSTINC_22))) -#if (!CONF_DMAC_SRCINC_22) -#define CONF_DMAC_SRC_STRIDE_22 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_22) -#define CONF_DMAC_DES_STRIDE_22 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_22 -#define CONF_DMAC_SRC_STRIDE_22 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_22 -#define CONF_DMAC_DES_STRIDE_22 0 -#endif - -// Channel 23 settings -// dmac_channel_23_settings -#ifndef CONF_DMAC_CHANNEL_23_SETTINGS -#define CONF_DMAC_CHANNEL_23_SETTINGS 0 -#endif - -// Burst Size -// <0x0=> 1 burst size -// <0x1=> 4 burst size -// <0x2=> 8 burst size -// <0x3=> 16 burst size -// Define the memory burst size -// dmac_burstsize_23 -#ifndef CONF_DMAC_BURSTSIZE_23 -#define CONF_DMAC_BURSTSIZE_23 0x0 -#endif - -// Chunk Size -// <0x0=> 1 data transferred -// <0x1=> 2 data transferred -// <0x2=> 4 data transferred -// <0x3=> 8 data transferred -// <0x4=> 16 data transferred -// Define the peripheral chunk size -// dmac_chunksize_23 -#ifndef CONF_DMAC_CHUNKSIZE_23 -#define CONF_DMAC_CHUNKSIZE_23 0x0 -#endif - -// Beat Size -// <0=> 8-bit bus transfer -// <1=> 16-bit bus transfer -// <2=> 32-bit bus transfer -// Defines the size of one beat -// dmac_beatsize_23 -#ifndef CONF_DMAC_BEATSIZE_23 -#define CONF_DMAC_BEATSIZE_23 0x0 -#endif - -// Source Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is read through the system bus interface 0 or 1 -// dma_src_interface_23 -#ifndef CONF_DMAC_SRC_INTERFACE_23 -#define CONF_DMAC_SRC_INTERFACE_23 0x0 -#endif - -// Destination Interface Identifier -// <0x0=> AHB_IF0 -// <0x1=> AHB_IF1 -// Define the data is written through the system bus interface 0 or 1 -// dma_des_interface_23 -#ifndef CONF_DMAC_DES_INTERFACE_23 -#define CONF_DMAC_DES_INTERFACE_23 0x0 -#endif - -// Source Address Increment -// Indicates whether the source address incremented as beat size or not -// dmac_srcinc_23 -#ifndef CONF_DMAC_SRCINC_23 -#define CONF_DMAC_SRCINC_23 0 -#endif - -// Destination Address Increment -// Indicates whether the destination address incremented as beat size or not -// dmac_dstinc_23 -#ifndef CONF_DMAC_DSTINC_23 -#define CONF_DMAC_DSTINC_23 0 -#endif - -// Transfer Type -// <0x0=> Memory to Memory Transfer -// <0x1=> Peripheral to Memory Transfer -// <0x2=> Memory to Peripheral Transfer -// Define the data transfer type -// dma_trans_type_23 -#ifndef CONF_DMAC_TRANS_TYPE_23 -#define CONF_DMAC_TRANS_TYPE_23 0x0 -#endif - -// Trigger source -// <0xFF=> Software Trigger -// <0x00=> HSMCI TX/RX Trigger -// <0x01=> SPI0 TX Trigger -// <0x02=> SPI0 RX Trigger -// <0x03=> SPI1 TX Trigger -// <0x04=> SPI1 RX Trigger -// <0x05=> QSPI TX Trigger -// <0x06=> QSPI RX Trigger -// <0x07=> USART0 TX Trigger -// <0x08=> USART0 RX Trigger -// <0x09=> USART1 TX Trigger -// <0x0A=> USART1 RX Trigger -// <0x0B=> USART2 TX Trigger -// <0x0C=> USART2 RX Trigger -// <0x0D=> PWM0 TX Trigger -// <0x0E=> TWIHS0 TX Trigger -// <0x0F=> TWIHS0 RX Trigger -// <0x10=> TWIHS1 TX Trigger -// <0x11=> TWIHS1 RX Trigger -// <0x12=> TWIHS2 TX Trigger -// <0x13=> TWIHS2 RX Trigger -// <0x14=> UART0 TX Trigger -// <0x15=> UART0 RX Trigger -// <0x16=> UART1 TX Trigger -// <0x17=> UART1 RX Trigger -// <0x18=> UART2 TX Trigger -// <0x19=> UART2 RX Trigger -// <0x1A=> UART3 TX Trigger -// <0x1B=> UART3 RX Trigger -// <0x1C=> UART4 TX Trigger -// <0x1D=> UART4 RX Trigger -// <0x1E=> DACC TX Trigger -// <0x20=> SSC TX Trigger -// <0x21=> SSC RX Trigger -// <0x22=> PIOA RX Trigger -// <0x23=> AFEC0 RX Trigger -// <0x24=> AFEC1 RX Trigger -// <0x25=> AES TX Trigger -// <0x26=> AES RX Trigger -// <0x27=> PWM1 TX Trigger -// <0x28=> TC0 RX Trigger -// <0x29=> TC3 RX Trigger -// <0x2A=> TC6 RX Trigger -// <0x2B=> TC9 RX Trigger -// <0x2C=> I2SC0 TX Left Trigger -// <0x2D=> I2SC0 RX Left Trigger -// <0x2E=> I2SC1 TX Left Trigger -// <0x2F=> I2SC1 RX Left Trigger -// <0x30=> I2SC0 TX Right Trigger -// <0x31=> I2SC0 RX Right Trigger -// <0x32=> I2SC1 TX Right Trigger -// <0x33=> I2SC1 RX Right Trigger -// Define the DMA trigger source -// dmac_trifsrc_23 -#ifndef CONF_DMAC_TRIGSRC_23 -#define CONF_DMAC_TRIGSRC_23 0xff -#endif - -// - -#if CONF_DMAC_TRANS_TYPE_23 == 0 -#define CONF_DMAC_TYPE_23 0 -#define CONF_DMAC_DSYNC_23 0 -#elif CONF_DMAC_TRANS_TYPE_23 == 1 -#define CONF_DMAC_TYPE_23 1 -#define CONF_DMAC_DSYNC_23 0 -#elif CONF_DMAC_TRANS_TYPE_23 == 2 -#define CONF_DMAC_TYPE_23 1 -#define CONF_DMAC_DSYNC_23 1 -#endif - -#if CONF_DMAC_TRIGSRC_23 == 0xFF -#define CONF_DMAC_SWREQ_23 1 -#else -#define CONF_DMAC_SWREQ_23 0 -#endif - -/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address - * or fixed destination address mode, source and destination addresses are incremented - * by 8-bit or 16-bit. - * Workaround: The user can fix the problem by setting the source addressing mode to - * use microblock and data striding with microblock stride set to 0 and data stride set to -1. - */ -#if (CONF_DMAC_CHANNEL_23_SETTINGS == 1 && CONF_DMAC_BEATSIZE_23 != 2 \ - && ((!CONF_DMAC_SRCINC_23) || (!CONF_DMAC_DSTINC_23))) -#if (!CONF_DMAC_SRCINC_23) -#define CONF_DMAC_SRC_STRIDE_23 ((int16_t)(-1)) -#endif -#if (!CONF_DMAC_DSTINC_23) -#define CONF_DMAC_DES_STRIDE_23 ((int16_t)(-1)) -#endif -#endif - -#ifndef CONF_DMAC_SRC_STRIDE_23 -#define CONF_DMAC_SRC_STRIDE_23 0 -#endif - -#ifndef CONF_DMAC_DES_STRIDE_23 -#define CONF_DMAC_DES_STRIDE_23 0 -#endif - -// - -// <<< end of configuration section >>> - -#endif // HPL_XDMAC_CONFIG_H diff --git a/hw/bsp/same70_xplained/peripheral_clk_config.h b/hw/bsp/same70_xplained/peripheral_clk_config.h deleted file mode 100644 index 84756f5ac..000000000 --- a/hw/bsp/same70_xplained/peripheral_clk_config.h +++ /dev/null @@ -1,126 +0,0 @@ -/* Auto-generated config file peripheral_clk_config.h */ -#ifndef PERIPHERAL_CLK_CONFIG_H -#define PERIPHERAL_CLK_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -/** - * \def CONF_HCLK_FREQUENCY - * \brief HCLK's Clock frequency - */ -#ifndef CONF_HCLK_FREQUENCY -#define CONF_HCLK_FREQUENCY 300000000 -#endif - -/** - * \def CONF_FCLK_FREQUENCY - * \brief FCLK's Clock frequency - */ -#ifndef CONF_FCLK_FREQUENCY -#define CONF_FCLK_FREQUENCY 300000000 -#endif - -/** - * \def CONF_CPU_FREQUENCY - * \brief CPU's Clock frequency - */ -#ifndef CONF_CPU_FREQUENCY -#define CONF_CPU_FREQUENCY 300000000 -#endif - -/** - * \def CONF_SLCK_FREQUENCY - * \brief Slow Clock frequency - */ -#define CONF_SLCK_FREQUENCY 0 - -/** - * \def CONF_MCK_FREQUENCY - * \brief Master Clock frequency - */ -#define CONF_MCK_FREQUENCY 150000000 - -/** - * \def CONF_PCK6_FREQUENCY - * \brief Programmable Clock Controller 6 frequency - */ -#define CONF_PCK6_FREQUENCY 1714285 - -// USART Clock Settings -// USART Clock source - -// <0=> Master Clock (MCK) -// <1=> MCK / 8 for USART -// <2=> Programmable Clock Controller 4 (PMC_PCK4) -// <3=> External Clock -// This defines the clock source for the USART -// usart_clock_source -#ifndef CONF_USART1_CK_SRC -#define CONF_USART1_CK_SRC 0 -#endif - -// USART External Clock Input on SCK <1-4294967295> -// Inputs the external clock frequency on SCK -// usart_clock_freq -#ifndef CONF_USART1_SCK_FREQ -#define CONF_USART1_SCK_FREQ 10000000 -#endif - -// - -/** - * \def USART FREQUENCY - * \brief USART's Clock frequency - */ -#ifndef CONF_USART1_FREQUENCY -#define CONF_USART1_FREQUENCY 150000000 -#endif - -#ifndef CONF_SRC_USB_480M -#define CONF_SRC_USB_480M 0 -#endif - -#ifndef CONF_SRC_USB_48M -#define CONF_SRC_USB_48M 1 -#endif - -// USB Full/Low Speed Clock -// USB Clock Controller (USB_48M) -// usb_fsls_clock_source -// 48MHz clock source for low speed and full speed. -// It must be available when low speed is supported by host driver. -// It must be available when low power mode is selected. -#ifndef CONF_USBHS_FSLS_SRC -#define CONF_USBHS_FSLS_SRC CONF_SRC_USB_48M -#endif - -// USB Clock Source(Normal/Low-power Mode Selection) -// USB High Speed Clock (USB_480M) -// USB Clock Controller (USB_48M) -// usb_clock_source -// Select the clock source for USB. -// In normal mode, use "USB High Speed Clock (USB_480M)". -// In low-power mode, use "USB Clock Controller (USB_48M)". -#ifndef CONF_USBHS_SRC -#define CONF_USBHS_SRC CONF_SRC_USB_480M -#endif - -/** - * \def CONF_USBHS_FSLS_FREQUENCY - * \brief USBHS's Full/Low Speed Clock Source frequency - */ -#ifndef CONF_USBHS_FSLS_FREQUENCY -#define CONF_USBHS_FSLS_FREQUENCY 48000000 -#endif - -/** - * \def CONF_USBHS_FREQUENCY - * \brief USBHS's Selected Clock Source frequency - */ -#ifndef CONF_USBHS_FREQUENCY -#define CONF_USBHS_FREQUENCY 480000000 -#endif - -// <<< end of configuration section >>> - -#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/hw/bsp/same70_xplained/same70_xplained.c b/hw/bsp/same70_xplained/same70_xplained.c deleted file mode 100644 index f532c6927..000000000 --- a/hw/bsp/same70_xplained/same70_xplained.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "sam.h" -#include "bsp/board_api.h" - -#include "peripheral_clk_config.h" -#include "hpl/usart/hpl_usart_base.h" -#include "hpl/pmc/hpl_pmc.h" -#include "hal/include/hal_init.h" -#include "hal/include/hal_usart_async.h" -#include "hal/include/hal_gpio.h" - - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -#define LED_PIN GPIO(GPIO_PORTC, 8) - -#define BUTTON_PIN GPIO(GPIO_PORTA, 11) -#define BUTTON_STATE_ACTIVE 0 - -#define UART_TX_PIN GPIO(GPIO_PORTB, 4) -#define UART_RX_PIN GPIO(GPIO_PORTA, 21) - -static struct usart_async_descriptor edbg_com; -static uint8_t edbg_com_buffer[64]; -static volatile bool uart_busy = false; - -static void tx_cb_EDBG_COM(const struct usart_async_descriptor *const io_descr) -{ - (void) io_descr; - uart_busy = false; -} - -//------------- IMPLEMENTATION -------------// -void board_init(void) -{ - init_mcu(); - - /* Disable Watchdog */ - hri_wdt_set_MR_WDDIS_bit(WDT); - - // LED - _pmc_enable_periph_clock(ID_PIOC); - gpio_set_pin_level(LED_PIN, false); - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); - - // Button - _pmc_enable_periph_clock(ID_PIOA); - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); - - // Uart via EDBG Com - _pmc_enable_periph_clock(ID_USART1); - gpio_set_pin_function(UART_RX_PIN, MUX_PA21A_USART1_RXD1); - gpio_set_pin_function(UART_TX_PIN, MUX_PB4D_USART1_TXD1); - - usart_async_init(&edbg_com, USART1, edbg_com_buffer, sizeof(edbg_com_buffer), _usart_get_usart_async()); - usart_async_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE); - usart_async_register_callback(&edbg_com, USART_ASYNC_TXC_CB, tx_cb_EDBG_COM); - usart_async_enable(&edbg_com); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer (samd SystemCoreClock may not correct) - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - // Enable USB clock - _pmc_enable_periph_clock(ID_USBHS); - -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USBHS_Handler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - // while until previous transfer is complete - while(uart_busy) {} - uart_busy = true; - - io_write(&edbg_com.io, buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/same7x/boards/same70_qmtech/board.cmake b/hw/bsp/same7x/boards/same70_qmtech/board.cmake new file mode 100644 index 000000000..cde4c3da6 --- /dev/null +++ b/hw/bsp/same7x/boards/same70_qmtech/board.cmake @@ -0,0 +1,8 @@ +set(JLINK_DEVICE SAME70N19B) +set(LD_FILE_GNU ${TOP}/hw/mcu/microchip/same70/same70b/gcc/gcc/same70q21b_flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAME70N19B__ + ) +endfunction() diff --git a/hw/bsp/same7x/boards/same70_qmtech/board.h b/hw/bsp/same7x/boards/same70_qmtech/board.h new file mode 100644 index 000000000..09c2c93a9 --- /dev/null +++ b/hw/bsp/same7x/boards/same70_qmtech/board.h @@ -0,0 +1,64 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: SAME70 QMTech + manufacturer: Microchip + url: https://www.aliexpress.com/item/1005003173783268.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED_PIN GPIO(GPIO_PORTA, 15) +#define LED_STATE_ON 1 +#define LED_PORT_CLOCK ID_PIOB + +#define BUTTON_PIN GPIO(GPIO_PORTA, 21) +#define BUTTON_STATE_ACTIVE 0 +#define BUTTON_PORT_CLOCK ID_PIOA + +#define UART_TX_PIN GPIO(GPIO_PORTB, 1) +#define UART_TX_FUNCTION MUX_PB4D_USART1_TXD1 +#define UART_RX_PIN GPIO(GPIO_PORTB, 0) +#define UART_RX_FUNCTION MUX_PA21A_USART1_RXD1 +#define UART_PORT_CLOCK ID_USART1 +#define BOARD_USART USART1 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; + (void) state; +} + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/same7x/boards/same70_qmtech/board.mk b/hw/bsp/same7x/boards/same70_qmtech/board.mk new file mode 100644 index 000000000..09ae98860 --- /dev/null +++ b/hw/bsp/same7x/boards/same70_qmtech/board.mk @@ -0,0 +1,3 @@ +CFLAGS += -D__SAME70N19B__ + +JLINK_DEVICE = SAME70N19B diff --git a/hw/bsp/same7x/boards/same70_qmtech/hpl_pmc_config.h b/hw/bsp/same7x/boards/same70_qmtech/hpl_pmc_config.h new file mode 100644 index 000000000..387aaa5df --- /dev/null +++ b/hw/bsp/same7x/boards/same70_qmtech/hpl_pmc_config.h @@ -0,0 +1,1053 @@ +/* Auto-generated config file hpl_pmc_config.h */ +#ifndef HPL_PMC_CONFIG_H +#define HPL_PMC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include + +#define CLK_SRC_OPTION_OSC32K 0 +#define CLK_SRC_OPTION_XOSC32K 1 +#define CLK_SRC_OPTION_OSC12M 2 +#define CLK_SRC_OPTION_XOSC20M 3 + +#define CLK_SRC_OPTION_SLCK 0 +#define CLK_SRC_OPTION_MAINCK 1 +#define CLK_SRC_OPTION_PLLACK 2 +#define CLK_SRC_OPTION_UPLLCKDIV 3 +#define CLK_SRC_OPTION_MCK 4 + +#define CLK_SRC_OPTION_UPLLCK 3 + +#define CONF_RC_4M 0 +#define CONF_RC_8M 1 +#define CONF_RC_12M 2 + +#define CONF_XOSC32K_NO_BYPASS 0 +#define CONF_XOSC32K_BYPASS 1 + +#define CONF_XOSC20M_NO_BYPASS 0 +#define CONF_XOSC20M_BYPASS 1 + +// Clock_SLCK configuration +// Indicates whether SLCK configuration is enabled or not +// enable_clk_gen_slck +#ifndef CONF_CLK_SLCK_CONFIG +#define CONF_CLK_SLCK_CONFIG 1 +#endif + +// Clock Generator +// clock generator SLCK source + +// 32kHz High Accuracy Internal Oscillator (OSC32K) + +// 32kHz External Crystal Oscillator (XOSC32K) + +// This defines the clock source for SLCK +// clk_gen_slck_oscillator +#ifndef CONF_CLK_GEN_SLCK_SRC +#define CONF_CLK_GEN_SLCK_SRC CLK_SRC_OPTION_OSC32K +#endif + +// Enable Clock_SLCK +// Indicates whether SLCK is enabled or disable +// clk_gen_slck_arch_enable +#ifndef CONF_CLK_SLCK_ENABLE +#define CONF_CLK_SLCK_ENABLE 1 +#endif + +// + +// + +// +// // Clock_MAINCK configuration +// Indicates whether MAINCK configuration is enabled or not +// enable_clk_gen_mainck +#ifndef CONF_CLK_MAINCK_CONFIG +#define CONF_CLK_MAINCK_CONFIG 1 +#endif + +// Clock Generator +// clock generator MAINCK source + +// Embedded 4/8/12MHz RC Oscillator (OSC12M) + +// External 3-20MHz Oscillator (XOSC20M) + +// This defines the clock source for MAINCK +// clk_gen_mainck_oscillator +#ifndef CONF_CLK_GEN_MAINCK_SRC +#define CONF_CLK_GEN_MAINCK_SRC CLK_SRC_OPTION_XOSC20M +#endif + +// Enable Clock_MAINCK +// Indicates whether MAINCK is enabled or disable +// clk_gen_mainck_arch_enable +#ifndef CONF_CLK_MAINCK_ENABLE +#define CONF_CLK_MAINCK_ENABLE 1 +#endif + +// Enable Main Clock Failure Detection +// Indicates whether Main Clock Failure Detection is enabled or disable. +// The 4/8/12 MHz RC oscillator must be selected as the source of MAINCK. +// clk_gen_cfden_enable +#ifndef CONF_CLK_CFDEN_ENABLE +#define CONF_CLK_CFDEN_ENABLE 0 +#endif + +// + +// + +// +// // Clock_MCKR configuration +// Indicates whether MCKR configuration is enabled or not +// enable_clk_gen_mckr +#ifndef CONF_CLK_MCKR_CONFIG +#define CONF_CLK_MCKR_CONFIG 1 +#endif + +// Clock Generator +// clock generator MCKR source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// PLLA Clock (PLLACK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// This defines the clock source for MCKR +// clk_gen_mckr_oscillator +#ifndef CONF_CLK_GEN_MCKR_SRC +#define CONF_CLK_GEN_MCKR_SRC CLK_SRC_OPTION_PLLACK +#endif + +// Enable Clock_MCKR +// Indicates whether MCKR is enabled or disable +// clk_gen_mckr_arch_enable +#ifndef CONF_CLK_MCKR_ENABLE +#define CONF_CLK_MCKR_ENABLE 1 +#endif + +// + +// + +// Master Clock Prescaler +// <0=> 1 +// <1=> 2 +// <2=> 4 +// <3=> 8 +// <4=> 16 +// <5=> 32 +// <6=> 64 +// <7=> 3 +// Select the clock prescaler. +// mckr_presc +#ifndef CONF_MCKR_PRESC +#define CONF_MCKR_PRESC 0 +#endif + +// +// // Clock_MCK configuration +// Indicates whether MCK configuration is enabled or not +// enable_clk_gen_mck +#ifndef CONF_CLK_MCK_CONFIG +#define CONF_CLK_MCK_CONFIG 1 +#endif + +// Clock Generator +// clock generator MCK source + +// Master Clock Controller (PMC_MCKR) + +// This defines the clock source for MCK +// clk_gen_mck_oscillator +#ifndef CONF_CLK_GEN_MCK_SRC +#define CONF_CLK_GEN_MCK_SRC CLK_SRC_OPTION_MCKR +#endif + +// + +// + +// Master Clock Controller Divider MCK divider +// <0=> 1 +// <1=> 2 +// <3=> 3 +// <2=> 4 +// Select the master clock divider. +// mck_div +#ifndef CONF_MCK_DIV +#define CONF_MCK_DIV 1 +#endif + +// +// // Clock_SYSTICK configuration +// Indicates whether SYSTICK configuration is enabled or not +// enable_clk_gen_systick +#ifndef CONF_CLK_SYSTICK_CONFIG +#define CONF_CLK_SYSTICK_CONFIG 1 +#endif + +// Clock Generator +// clock generator SYSTICK source + +// Master Clock Controller (PMC_MCKR) + +// This defines the clock source for SYSTICK +// clk_gen_systick_oscillator +#ifndef CONF_CLK_GEN_SYSTICK_SRC +#define CONF_CLK_GEN_SYSTICK_SRC CLK_SRC_OPTION_MCKR +#endif + +// + +// + +// Systick clock divider +// <8=> 8 +// Select systick clock divider +// systick_clock_div +#ifndef CONF_SYSTICK_DIV +#define CONF_SYSTICK_DIV 8 +#endif + +// +// // Clock_FCLK configuration +// Indicates whether FCLK configuration is enabled or not +// enable_clk_gen_fclk +#ifndef CONF_CLK_FCLK_CONFIG +#define CONF_CLK_FCLK_CONFIG 1 +#endif + +// Clock Generator +// clock generator FCLK source + +// Master Clock Controller (PMC_MCKR) + +// This defines the clock source for FCLK +// clk_gen_fclk_oscillator +#ifndef CONF_CLK_GEN_FCLK_SRC +#define CONF_CLK_GEN_FCLK_SRC CLK_SRC_OPTION_MCKR +#endif + +// + +// + +// +// // Clock_GCLK0 configuration +// Indicates whether GCLK0 configuration is enabled or not +// enable_clk_gen_gclk0 +#ifndef CONF_CLK_GCLK0_CONFIG +#define CONF_CLK_GCLK0_CONFIG 1 +#endif + +// Clock Generator +// clock generator GCLK0 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// USB 480M Clock (UPLLCK) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for GCLK0 +// clk_gen_gclk0_oscillator +#ifndef CONF_CLK_GEN_GCLK0_SRC +#define CONF_CLK_GEN_GCLK0_SRC CLK_SRC_OPTION_MCK +#endif + +// Enable Clock_GCLK0 +// Indicates whether GCLK0 is enabled or disable +// clk_gen_gclk0_arch_enable +#ifndef CONF_CLK_GCLK0_ENABLE +#define CONF_CLK_GCLK0_ENABLE 1 +#endif + +// + +// +// Enable GCLK0 GCLKEN +// Indicates whether GCLK0 GCLKEN is enabled or disable +// gclk0_gclken_enable +#ifndef CONF_GCLK0_GCLKEN_ENABLE +#define CONF_GCLK0_GCLKEN_ENABLE 0 +#endif + +// Generic Clock GCLK0 divider <1-256> +// Select the clock divider (divider = GCLKDIV + 1). +// gclk0_div +#ifndef CONF_GCLK0_DIV +#define CONF_GCLK0_DIV 2 +#endif + +// +// // Clock_GCLK1 configuration +// Indicates whether GCLK1 configuration is enabled or not +// enable_clk_gen_gclk1 +#ifndef CONF_CLK_GCLK1_CONFIG +#define CONF_CLK_GCLK1_CONFIG 1 +#endif + +// Clock Generator +// clock generator GCLK1 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// USB 480M Clock (UPLLCK) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for GCLK1 +// clk_gen_gclk1_oscillator +#ifndef CONF_CLK_GEN_GCLK1_SRC +#define CONF_CLK_GEN_GCLK1_SRC CLK_SRC_OPTION_PLLACK +#endif + +// Enable Clock_GCLK1 +// Indicates whether GCLK1 is enabled or disable +// clk_gen_gclk1_arch_enable +#ifndef CONF_CLK_GCLK1_ENABLE +#define CONF_CLK_GCLK1_ENABLE 1 +#endif + +// + +// +// Enable GCLK1 GCLKEN +// Indicates whether GCLK1 GCLKEN is enabled or disable +// gclk1_gclken_enable +#ifndef CONF_GCLK1_GCLKEN_ENABLE +#define CONF_GCLK1_GCLKEN_ENABLE 0 +#endif + +// Generic Clock GCLK1 divider <1-256> +// Select the clock divider (divider = GCLKDIV + 1). +// gclk1_div +#ifndef CONF_GCLK1_DIV +#define CONF_GCLK1_DIV 3 +#endif + +// +// // Clock_PCK0 configuration +// Indicates whether PCK0 configuration is enabled or not +// enable_clk_gen_pck0 +#ifndef CONF_CLK_PCK0_CONFIG +#define CONF_CLK_PCK0_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK0 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK0 +// clk_gen_pck0_oscillator +#ifndef CONF_CLK_GEN_PCK0_SRC +#define CONF_CLK_GEN_PCK0_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK0 +// Indicates whether PCK0 is enabled or disable +// clk_gen_pck0_arch_enable +#ifndef CONF_CLK_PCK0_ENABLE +#define CONF_CLK_PCK0_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck0_presc +#ifndef CONF_PCK0_PRESC +#define CONF_PCK0_PRESC 1 +#endif + +// +// // Clock_PCK1 configuration +// Indicates whether PCK1 configuration is enabled or not +// enable_clk_gen_pck1 +#ifndef CONF_CLK_PCK1_CONFIG +#define CONF_CLK_PCK1_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK1 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK1 +// clk_gen_pck1_oscillator +#ifndef CONF_CLK_GEN_PCK1_SRC +#define CONF_CLK_GEN_PCK1_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK1 +// Indicates whether PCK1 is enabled or disable +// clk_gen_pck1_arch_enable +#ifndef CONF_CLK_PCK1_ENABLE +#define CONF_CLK_PCK1_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck1_presc +#ifndef CONF_PCK1_PRESC +#define CONF_PCK1_PRESC 2 +#endif + +// +// // Clock_PCK2 configuration +// Indicates whether PCK2 configuration is enabled or not +// enable_clk_gen_pck2 +#ifndef CONF_CLK_PCK2_CONFIG +#define CONF_CLK_PCK2_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK2 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK2 +// clk_gen_pck2_oscillator +#ifndef CONF_CLK_GEN_PCK2_SRC +#define CONF_CLK_GEN_PCK2_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK2 +// Indicates whether PCK2 is enabled or disable +// clk_gen_pck2_arch_enable +#ifndef CONF_CLK_PCK2_ENABLE +#define CONF_CLK_PCK2_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck2_presc +#ifndef CONF_PCK2_PRESC +#define CONF_PCK2_PRESC 3 +#endif + +// +// // Clock_PCK3 configuration +// Indicates whether PCK3 configuration is enabled or not +// enable_clk_gen_pck3 +#ifndef CONF_CLK_PCK3_CONFIG +#define CONF_CLK_PCK3_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK3 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK3 +// clk_gen_pck3_oscillator +#ifndef CONF_CLK_GEN_PCK3_SRC +#define CONF_CLK_GEN_PCK3_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK3 +// Indicates whether PCK3 is enabled or disable +// clk_gen_pck3_arch_enable +#ifndef CONF_CLK_PCK3_ENABLE +#define CONF_CLK_PCK3_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck3_presc +#ifndef CONF_PCK3_PRESC +#define CONF_PCK3_PRESC 4 +#endif + +// +// // Clock_PCK4 configuration +// Indicates whether PCK4 configuration is enabled or not +// enable_clk_gen_pck4 +#ifndef CONF_CLK_PCK4_CONFIG +#define CONF_CLK_PCK4_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK4 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK4 +// clk_gen_pck4_oscillator +#ifndef CONF_CLK_GEN_PCK4_SRC +#define CONF_CLK_GEN_PCK4_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK4 +// Indicates whether PCK4 is enabled or disable +// clk_gen_pck4_arch_enable +#ifndef CONF_CLK_PCK4_ENABLE +#define CONF_CLK_PCK4_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck4_presc +#ifndef CONF_PCK4_PRESC +#define CONF_PCK4_PRESC 5 +#endif + +// +// // Clock_PCK5 configuration +// Indicates whether PCK5 configuration is enabled or not +// enable_clk_gen_pck5 +#ifndef CONF_CLK_PCK5_CONFIG +#define CONF_CLK_PCK5_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK5 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK5 +// clk_gen_pck5_oscillator +#ifndef CONF_CLK_GEN_PCK5_SRC +#define CONF_CLK_GEN_PCK5_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK5 +// Indicates whether PCK5 is enabled or disable +// clk_gen_pck5_arch_enable +#ifndef CONF_CLK_PCK5_ENABLE +#define CONF_CLK_PCK5_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck5_presc +#ifndef CONF_PCK5_PRESC +#define CONF_PCK5_PRESC 6 +#endif + +// +// // Clock_PCK6 configuration +// Indicates whether PCK6 configuration is enabled or not +// enable_clk_gen_pck6 +#ifndef CONF_CLK_PCK6_CONFIG +#define CONF_CLK_PCK6_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK6 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK6 +// clk_gen_pck6_oscillator +#ifndef CONF_CLK_GEN_PCK6_SRC +#define CONF_CLK_GEN_PCK6_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK6 +// Indicates whether PCK6 is enabled or disable +// clk_gen_pck6_arch_enable +#ifndef CONF_CLK_PCK6_ENABLE +#define CONF_CLK_PCK6_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck6_presc +#ifndef CONF_PCK6_PRESC +#define CONF_PCK6_PRESC 7 +#endif + +// +// // Clock_USB_480M configuration +// Indicates whether USB_480M configuration is enabled or not +// enable_clk_gen_usb_480m +#ifndef CONF_CLK_USB_480M_CONFIG +#define CONF_CLK_USB_480M_CONFIG 1 +#endif + +// Clock Generator +// clock generator USB_480M source + +// USB 480M Clock (UPLLCK) + +// This defines the clock source for USB_480M +// clk_gen_usb_480m_oscillator +#ifndef CONF_CLK_GEN_USB_480M_SRC +#define CONF_CLK_GEN_USB_480M_SRC CLK_SRC_OPTION_UPLLCK +#endif + +// + +// + +// +// // Clock_USB_48M configuration +// Indicates whether USB_48M configuration is enabled or not +// enable_clk_gen_usb_48m +#ifndef CONF_CLK_USB_48M_CONFIG +#define CONF_CLK_USB_48M_CONFIG 1 +#endif + +// Clock Generator +// clock generator USB_48M source + +// PLLA Clock (PLLACK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// This defines the clock source for USB_48M +// clk_gen_usb_48m_oscillator +#ifndef CONF_CLK_GEN_USB_48M_SRC +#define CONF_CLK_GEN_USB_48M_SRC CLK_SRC_OPTION_UPLLCKDIV +#endif + +// Enable Clock_USB_48M +// Indicates whether USB_48M is enabled or disable +// clk_gen_usb_48m_arch_enable +#ifndef CONF_CLK_USB_48M_ENABLE +#define CONF_CLK_USB_48M_ENABLE 1 +#endif + +// + +// + +// USB Clock Controller Divider <1-16> +// Select the USB clock divider (divider = USBDIV + 1). +// usb_48m_div +#ifndef CONF_USB_48M_DIV +#define CONF_USB_48M_DIV 5 +#endif + +// +// // Clock_SLCK2 configuration +// Indicates whether SLCK2 configuration is enabled or not +// enable_clk_gen_slck2 +#ifndef CONF_CLK_SLCK2_CONFIG +#define CONF_CLK_SLCK2_CONFIG 1 +#endif + +// Clock Generator +// clock generator SLCK2 source + +// Slow Clock (SLCK) + +// This defines the clock source for SLCK2 +// clk_gen_slck2_oscillator +#ifndef CONF_CLK_GEN_SLCK2_SRC +#define CONF_CLK_GEN_SLCK2_SRC CLK_SRC_OPTION_SLCK +#endif + +// + +// + +// +// + +// System Configuration +// Indicates whether configuration for system is enabled or not +// enable_hclk_clock +#ifndef CONF_SYSTEM_CONFIG +#define CONF_SYSTEM_CONFIG 1 +#endif + +// Processor Clock Settings +// Processor Clock source +// Master Clock Controller (PMC_MCKR) +// This defines the clock source for the HCLK (Processor clock) +// hclk_clock_source +#ifndef CONF_HCLK_SRC +#define CONF_HCLK_SRC MCKR +#endif + +// Flash Wait State +// <0=> 1 cycle +// <1=> 2 cycles +// <2=> 3 cycles +// <3=> 4 cycles +// <4=> 5 cycles +// <5=> 6 cycles +// <6=> 7 cycles +// This field defines the number of wait states for read and write operations. +// efc_fws +#ifndef CONF_EFC_WAIT_STATE +#define CONF_EFC_WAIT_STATE 5 +#endif + +// +// + +// SysTick Clock +// enable_systick_clk_clock +#ifndef CONF_SYSTICK_CLK_CONFIG +#define CONF_SYSTICK_CLK_CONFIG 1 +#endif + +// SysTick Clock source +// Master Clock Controller (PMC_MCKR) +// This defines the clock source for the SysTick Clock +// systick_clk_clock_source +#ifndef CONF_SYSTICK_CLK_SRC +#define CONF_SYSTICK_CLK_SRC MCKR +#endif + +// SysTick Clock Divider +// <8=> 8 +// Fixed to 8 if Systick is not using Processor clock +// systick_clk_clock_div +#ifndef CONF_SYSTICK_CLK_DIV +#define CONF_SYSTICK_CLK_DIV 8 +#endif + +// + +// OSC32K Oscillator Configuration +// Indicates whether configuration for OSC32K is enabled or not +// enable_osc32k +#ifndef CONF_OSC32K_CONFIG +#define CONF_OSC32K_CONFIG 1 +#endif + +// OSC32K Oscillator Control +// OSC32K Oscillator Enable +// Indicates whether OSC32K Oscillator is enabled or not +// osc32k_arch_enable +#ifndef CONF_OSC32K_ENABLE +#define CONF_OSC32K_ENABLE 0 +#endif +// +// + +// XOSC32K Oscillator Configuration +// Indicates whether configuration for XOSC32K is enabled or not +// enable_xosc32k +#ifndef CONF_XOSC32K_CONFIG +#define CONF_XOSC32K_CONFIG 0 +#endif + +// XOSC32K Oscillator Control +// Oscillator Bypass Select +// The 32kHz crystal oscillator is not bypassed. +// The 32kHz crystal oscillator is bypassed. +// Indicates whether XOSC32K is bypassed. +// xosc32k_bypass +#ifndef CONF_XOSC32K +#define CONF_XOSC32K CONF_XOSC32K_NO_BYPASS +#endif + +// XOSC32K Oscillator Enable +// Indicates whether XOSC32K Oscillator is enabled or not +// xosc32k_arch_enable +#ifndef CONF_XOSC32K_ENABLE +#define CONF_XOSC32K_ENABLE 0 +#endif +// +// + +// OSC12M Oscillator Configuration +// Indicates whether configuration for OSC12M is enabled or not +// enable_osc12m +#ifndef CONF_OSC12M_CONFIG +#define CONF_OSC12M_CONFIG 0 +#endif + +// OSC12M Oscillator Control +// OSC12M Oscillator Enable +// Indicates whether OSC12M Oscillator is enabled or not. +// osc12m_arch_enable +#ifndef CONF_OSC12M_ENABLE +#define CONF_OSC12M_ENABLE 0 +#endif + +// OSC12M selector +// <0=> 4000000 +// <1=> 8000000 +// <2=> 12000000 +// Select the frequency of embedded fast RC oscillator. +// osc12m_selector +#ifndef CONF_OSC12M_SELECTOR +#define CONF_OSC12M_SELECTOR 2 +#endif +// +// + +// XOSC20M Oscillator Configuration +// Indicates whether configuration for XOSC20M is enabled or not. +// enable_xosc20m +#ifndef CONF_XOSC20M_CONFIG +#define CONF_XOSC20M_CONFIG 1 +#endif + +// XOSC20M Oscillator Control +// XOSC20M selector <3000000-20000000> +// Select the frequency of crystal or ceramic resonator oscillator. +// xosc20m_selector +#ifndef CONF_XOSC20M_SELECTOR +#define CONF_XOSC20M_SELECTOR 12000000 +#endif + +// Start up time for the external oscillator (ms): <0-256> +// Select start-up time. +// xosc20m_startup_time +#ifndef CONF_XOSC20M_STARTUP_TIME +#define CONF_XOSC20M_STARTUP_TIME 62 +#endif + +// Oscillator Bypass Select +// The external crystal oscillator is not bypassed. +// The external crystal oscillator is bypassed. +// Indicates whether XOSC20M is bypassed. +// xosc20m_bypass +#ifndef CONF_XOSC20M +#define CONF_XOSC20M CONF_XOSC20M_NO_BYPASS +#endif + +// XOSC20M Oscillator Enable +// Indicates whether XOSC20M Oscillator is enabled or not +// xosc20m_arch_enable +#ifndef CONF_XOSC20M_ENABLE +#define CONF_XOSC20M_ENABLE 1 +#endif +// +// + +// PLLACK Oscillator Configuration +// Indicates whether configuration for PLLACK is enabled or not +// enable_pllack +#ifndef CONF_PLLACK_CONFIG +#define CONF_PLLACK_CONFIG 1 +#endif + +// PLLACK Reference Clock Source +// Main Clock (MAINCK) +// Select the clock source. +// pllack_ref_clock +#ifndef CONF_PLLACK_CLK +#define CONF_PLLACK_CLK MAINCK +#endif + +// PLLACK Oscillator Control +// PLLACK Oscillator Enable +// Indicates whether PLLACK Oscillator is enabled or not +// pllack_arch_enable +#ifndef CONF_PLLACK_ENABLE +#define CONF_PLLACK_ENABLE 1 +#endif + +// PLLA Frontend Divider (DIVA) <1-255> +// Select the clock divider +// pllack_div +#ifndef CONF_PLLACK_DIV +#define CONF_PLLACK_DIV 1 +#endif + +// PLLACK Muliplier <1-62> +// Indicates PLLA multiplier (multiplier = MULA + 1). +// pllack_mul +#ifndef CONF_PLLACK_MUL +#define CONF_PLLACK_MUL 25 +#endif +// +// + +// UPLLCK Oscillator Configuration +// Indicates whether configuration for UPLLCK is enabled or not +// enable_upllck +#ifndef CONF_UPLLCK_CONFIG +#define CONF_UPLLCK_CONFIG 1 +#endif + +// UPLLCK Reference Clock Source +// External 3-20MHz Oscillator (XOSC20M) +// Select the clock source,only when the input frequency is 12M or 16M, the upllck output is 480M. +// upllck_ref_clock +#ifndef CONF_UPLLCK_CLK +#define CONF_UPLLCK_CLK XOSC20M +#endif + +// UPLLCK Oscillator Control +// UPLLCK Oscillator Enable +// Indicates whether UPLLCK Oscillator is enabled or not +// upllck_arch_enable +#ifndef CONF_UPLLCK_ENABLE +#define CONF_UPLLCK_ENABLE 1 +#endif +// +// + +// UPLLCKDIV Oscillator Configuration +// Indicates whether configuration for UPLLCKDIV is enabled or not +// enable_upllckdiv +#ifndef CONF_UPLLCKDIV_CONFIG +#define CONF_UPLLCKDIV_CONFIG 1 +#endif + +// UPLLCKDIV Reference Clock Source +// USB 480M Clock (UPLLCK) +// Select the clock source. +// upllckdiv_ref_clock +#ifndef CONF_UPLLCKDIV_CLK +#define CONF_UPLLCKDIV_CLK UPLLCK +#endif + +// UPLLCKDIV Oscillator Control +// UPLLCKDIV Clock Divider +// <0=> 1 +// <1=> 2 +// Select the clock divider. +// upllckdiv_div +#ifndef CONF_UPLLCKDIV_DIV +#define CONF_UPLLCKDIV_DIV 1 +#endif +// +// + +// MCK/8 +// enable_mck_div_8 +#ifndef CONF_MCK_DIV_8_CONFIG +#define CONF_MCK_DIV_8_CONFIG 0 +#endif + +// MCK/8 Source +// <0=> Master Clock (MCK) +// mck_div_8_src +#ifndef CONF_MCK_DIV_8_SRC +#define CONF_MCK_DIV_8_SRC 0 +#endif +// + +// External Clock Input Configuration +// enable_dummy_ext +#ifndef CONF_DUMMY_EXT_CONFIG +#define CONF_DUMMY_EXT_CONFIG 1 +#endif + +// External Clock Input Source +// All here are dummy values +// Refer to the peripherals settings for actual input information +// <0=> Specific clock input from specific pin +// dummy_ext_src +#ifndef CONF_DUMMY_EXT_SRC +#define CONF_DUMMY_EXT_SRC 0 +#endif +// + +// External Clock Configuration +// enable_dummy_ext_clk +#ifndef CONF_DUMMY_EXT_CLK_CONFIG +#define CONF_DUMMY_EXT_CLK_CONFIG 1 +#endif + +// External Clock Source +// All here are dummy values +// Refer to the peripherals settings for actual input information +// <0=> External Clock Input +// dummy_ext_clk_src +#ifndef CONF_DUMMY_EXT_CLK_SRC +#define CONF_DUMMY_EXT_CLK_SRC 0 +#endif +// + +// <<< end of configuration section >>> + +#endif // HPL_PMC_CONFIG_H diff --git a/hw/bsp/same7x/boards/same70_qmtech/hpl_usart_config.h b/hw/bsp/same7x/boards/same70_qmtech/hpl_usart_config.h new file mode 100644 index 000000000..50ca3f15c --- /dev/null +++ b/hw/bsp/same7x/boards/same70_qmtech/hpl_usart_config.h @@ -0,0 +1,215 @@ +/* Auto-generated config file hpl_usart_config.h */ +#ifndef HPL_USART_CONFIG_H +#define HPL_USART_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include + +#ifndef CONF_USART_1_ENABLE +#define CONF_USART_1_ENABLE 1 +#endif + +// Basic Configuration + +// Frame parity +// <0x0=>Even parity +// <0x1=>Odd parity +// <0x2=>Parity forced to 0 +// <0x3=>Parity forced to 1 +// <0x4=>No parity +// Parity bit mode for USART frame +// usart_parity +#ifndef CONF_USART_1_PARITY +#define CONF_USART_1_PARITY 0x4 +#endif + +// Character Size +// <0x0=>5 bits +// <0x1=>6 bits +// <0x2=>7 bits +// <0x3=>8 bits +// Data character size in USART frame +// usart_character_size +#ifndef CONF_USART_1_CHSIZE +#define CONF_USART_1_CHSIZE 0x3 +#endif + +// Stop Bit +// <0=>1 stop bit +// <1=>1.5 stop bits +// <2=>2 stop bits +// Number of stop bits in USART frame +// usart_stop_bit +#ifndef CONF_USART_1_SBMODE +#define CONF_USART_1_SBMODE 0 +#endif + +// Clock Output Select +// <0=>The USART does not drive the SCK pin +// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK +// Clock Output Select in USART sck, if in usrt master mode, please drive SCK. +// usart_clock_output_select +#ifndef CONF_USART_1_CLKO +#define CONF_USART_1_CLKO 0 +#endif + +// Baud rate <1-3000000> +// USART baud rate setting +// usart_baud_rate +#ifndef CONF_USART_1_BAUD +#define CONF_USART_1_BAUD 9600 +#endif + +// + +// Advanced configuration +// usart_advanced +#ifndef CONF_USART_1_ADVANCED_CONFIG +#define CONF_USART_1_ADVANCED_CONFIG 0 +#endif + +// Channel Mode +// <0=>Normal Mode +// <1=>Automatic Echo +// <2=>Local Loopback +// <3=>Remote Loopback +// Channel mode in USART frame +// usart_channel_mode +#ifndef CONF_USART_1_CHMODE +#define CONF_USART_1_CHMODE 0 +#endif + +// 9 bits character enable +// Enable 9 bits character, this has high priority than 5/6/7/8 bits. +// usart_9bits_enable +#ifndef CONF_USART_1_MODE9 +#define CONF_USART_1_MODE9 0 +#endif + +// Variable Sync +// <0=>User defined configuration +// <1=>sync field is updated when a character is written into US_THR +// Variable Synchronization of Command/Data Sync Start Frarm Delimiter +// variable_sync +#ifndef CONF_USART_1_VAR_SYNC +#define CONF_USART_1_VAR_SYNC 0 +#endif + +// Oversampling Mode +// <0=>16 Oversampling +// <1=>8 Oversampling +// Oversampling Mode in UART mode +// usart__oversampling_mode +#ifndef CONF_USART_1_OVER +#define CONF_USART_1_OVER 0 +#endif + +// Inhibit Non Ack +// <0=>The NACK is generated +// <1=>The NACK is not generated +// Inhibit Non Acknowledge +// usart__inack +#ifndef CONF_USART_1_INACK +#define CONF_USART_1_INACK 1 +#endif + +// Disable Successive NACK +// <0=>NACK is sent on the ISO line as soon as a parity error occurs +// <1=>Many parity errors generate a NACK on the ISO line +// Disable Successive NACK +// usart_dsnack +#ifndef CONF_USART_1_DSNACK +#define CONF_USART_1_DSNACK 0 +#endif + +// Inverted Data +// <0=>Data isn't inverted, nomal mode +// <1=>Data is inverted +// Inverted Data +// usart_invdata +#ifndef CONF_USART_1_INVDATA +#define CONF_USART_1_INVDATA 0 +#endif + +// Maximum Number of Automatic Iteration <0-7> +// Defines the maximum number of iterations in mode ISO7816, protocol T = 0. +// usart_max_iteration +#ifndef CONF_USART_1_MAX_ITERATION +#define CONF_USART_1_MAX_ITERATION 0 +#endif + +// Receive Line Filter enable +// whether the USART filters the receive line using a three-sample filter +// usart_receive_filter_enable +#ifndef CONF_USART_1_FILTER +#define CONF_USART_1_FILTER 0 +#endif + +// Manchester Encoder/Decoder Enable +// whether the USART Manchester Encoder/Decoder +// usart_manchester_filter_enable +#ifndef CONF_USART_1_MAN +#define CONF_USART_1_MAN 0 +#endif + +// Manchester Synchronization Mode +// <0=>The Manchester start bit is a 0 to 1 transition +// <1=>The Manchester start bit is a 1 to 0 transition +// Manchester Synchronization Mode +// usart_manchester_synchronization_mode +#ifndef CONF_USART_1_MODSYNC +#define CONF_USART_1_MODSYNC 0 +#endif + +// Start Frame Delimiter Selector +// <0=>Start frame delimiter is COMMAND or DATA SYNC +// <1=>Start frame delimiter is one bit +// Start Frame Delimiter Selector +// usart_start_frame_delimiter +#ifndef CONF_USART_1_ONEBIT +#define CONF_USART_1_ONEBIT 0 +#endif + +// Fractional Part <0-7> +// Fractional part of the baud rate if baud rate generator is in fractional mode +// usart_arch_fractional +#ifndef CONF_USART_1_FRACTIONAL +#define CONF_USART_1_FRACTIONAL 0x0 +#endif + +// Data Order +// <0=>LSB is transmitted first +// <1=>MSB is transmitted first +// Data order of the data bits in the frame +// usart_arch_msbf +#ifndef CONF_USART_1_MSBF +#define CONF_USART_1_MSBF 0 +#endif + +// + +#define CONF_USART_1_MODE 0x0 + +// Calculate BAUD register value in UART mode +#if CONF_USART1_CK_SRC < 3 +#ifndef CONF_USART_1_BAUD_CD +#define CONF_USART_1_BAUD_CD ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / 8 / (2 - CONF_USART_1_OVER)) +#endif +#ifndef CONF_USART_1_BAUD_FP +#define CONF_USART_1_BAUD_FP \ + ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / (2 - CONF_USART_1_OVER) - 8 * CONF_USART_1_BAUD_CD) +#endif +#elif CONF_USART1_CK_SRC == 3 +// No division is active. The value written in US_BRGR has no effect. +#ifndef CONF_USART_1_BAUD_CD +#define CONF_USART_1_BAUD_CD 1 +#endif +#ifndef CONF_USART_1_BAUD_FP +#define CONF_USART_1_BAUD_FP 1 +#endif +#endif + +// <<< end of configuration section >>> + +#endif // HPL_USART_CONFIG_H diff --git a/hw/bsp/same7x/boards/same70_qmtech/hpl_xdmac_config.h b/hw/bsp/same7x/boards/same70_qmtech/hpl_xdmac_config.h new file mode 100644 index 000000000..a3d62c6fc --- /dev/null +++ b/hw/bsp/same7x/boards/same70_qmtech/hpl_xdmac_config.h @@ -0,0 +1,4400 @@ +/* Auto-generated config file hpl_xdmac_config.h */ +#ifndef HPL_XDMAC_CONFIG_H +#define HPL_XDMAC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// XDMAC enable +// Indicates whether xdmac is enabled or not +// xdmac_enable +#ifndef CONF_DMA_ENABLE +#define CONF_DMA_ENABLE 0 +#endif + +// Channel 0 settings +// dmac_channel_0_settings +#ifndef CONF_DMAC_CHANNEL_0_SETTINGS +#define CONF_DMAC_CHANNEL_0_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_0 +#ifndef CONF_DMAC_BURSTSIZE_0 +#define CONF_DMAC_BURSTSIZE_0 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_0 +#ifndef CONF_DMAC_CHUNKSIZE_0 +#define CONF_DMAC_CHUNKSIZE_0 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_0 +#ifndef CONF_DMAC_BEATSIZE_0 +#define CONF_DMAC_BEATSIZE_0 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_0 +#ifndef CONF_DMAC_SRC_INTERFACE_0 +#define CONF_DMAC_SRC_INTERFACE_0 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_0 +#ifndef CONF_DMAC_DES_INTERFACE_0 +#define CONF_DMAC_DES_INTERFACE_0 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_0 +#ifndef CONF_DMAC_SRCINC_0 +#define CONF_DMAC_SRCINC_0 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_0 +#ifndef CONF_DMAC_DSTINC_0 +#define CONF_DMAC_DSTINC_0 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_0 +#ifndef CONF_DMAC_TRANS_TYPE_0 +#define CONF_DMAC_TRANS_TYPE_0 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_0 +#ifndef CONF_DMAC_TRIGSRC_0 +#define CONF_DMAC_TRIGSRC_0 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_0 == 0 +#define CONF_DMAC_TYPE_0 0 +#define CONF_DMAC_DSYNC_0 0 +#elif CONF_DMAC_TRANS_TYPE_0 == 1 +#define CONF_DMAC_TYPE_0 1 +#define CONF_DMAC_DSYNC_0 0 +#elif CONF_DMAC_TRANS_TYPE_0 == 2 +#define CONF_DMAC_TYPE_0 1 +#define CONF_DMAC_DSYNC_0 1 +#endif + +#if CONF_DMAC_TRIGSRC_0 == 0xFF +#define CONF_DMAC_SWREQ_0 1 +#else +#define CONF_DMAC_SWREQ_0 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_0_SETTINGS == 1 && CONF_DMAC_BEATSIZE_0 != 2 && ((!CONF_DMAC_SRCINC_0) || (!CONF_DMAC_DSTINC_0))) +#if (!CONF_DMAC_SRCINC_0) +#define CONF_DMAC_SRC_STRIDE_0 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_0) +#define CONF_DMAC_DES_STRIDE_0 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_0 +#define CONF_DMAC_SRC_STRIDE_0 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_0 +#define CONF_DMAC_DES_STRIDE_0 0 +#endif + +// Channel 1 settings +// dmac_channel_1_settings +#ifndef CONF_DMAC_CHANNEL_1_SETTINGS +#define CONF_DMAC_CHANNEL_1_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_1 +#ifndef CONF_DMAC_BURSTSIZE_1 +#define CONF_DMAC_BURSTSIZE_1 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_1 +#ifndef CONF_DMAC_CHUNKSIZE_1 +#define CONF_DMAC_CHUNKSIZE_1 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_1 +#ifndef CONF_DMAC_BEATSIZE_1 +#define CONF_DMAC_BEATSIZE_1 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_1 +#ifndef CONF_DMAC_SRC_INTERFACE_1 +#define CONF_DMAC_SRC_INTERFACE_1 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_1 +#ifndef CONF_DMAC_DES_INTERFACE_1 +#define CONF_DMAC_DES_INTERFACE_1 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_1 +#ifndef CONF_DMAC_SRCINC_1 +#define CONF_DMAC_SRCINC_1 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_1 +#ifndef CONF_DMAC_DSTINC_1 +#define CONF_DMAC_DSTINC_1 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_1 +#ifndef CONF_DMAC_TRANS_TYPE_1 +#define CONF_DMAC_TRANS_TYPE_1 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_1 +#ifndef CONF_DMAC_TRIGSRC_1 +#define CONF_DMAC_TRIGSRC_1 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_1 == 0 +#define CONF_DMAC_TYPE_1 0 +#define CONF_DMAC_DSYNC_1 0 +#elif CONF_DMAC_TRANS_TYPE_1 == 1 +#define CONF_DMAC_TYPE_1 1 +#define CONF_DMAC_DSYNC_1 0 +#elif CONF_DMAC_TRANS_TYPE_1 == 2 +#define CONF_DMAC_TYPE_1 1 +#define CONF_DMAC_DSYNC_1 1 +#endif + +#if CONF_DMAC_TRIGSRC_1 == 0xFF +#define CONF_DMAC_SWREQ_1 1 +#else +#define CONF_DMAC_SWREQ_1 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_1_SETTINGS == 1 && CONF_DMAC_BEATSIZE_1 != 2 && ((!CONF_DMAC_SRCINC_1) || (!CONF_DMAC_DSTINC_1))) +#if (!CONF_DMAC_SRCINC_1) +#define CONF_DMAC_SRC_STRIDE_1 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_1) +#define CONF_DMAC_DES_STRIDE_1 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_1 +#define CONF_DMAC_SRC_STRIDE_1 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_1 +#define CONF_DMAC_DES_STRIDE_1 0 +#endif + +// Channel 2 settings +// dmac_channel_2_settings +#ifndef CONF_DMAC_CHANNEL_2_SETTINGS +#define CONF_DMAC_CHANNEL_2_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_2 +#ifndef CONF_DMAC_BURSTSIZE_2 +#define CONF_DMAC_BURSTSIZE_2 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_2 +#ifndef CONF_DMAC_CHUNKSIZE_2 +#define CONF_DMAC_CHUNKSIZE_2 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_2 +#ifndef CONF_DMAC_BEATSIZE_2 +#define CONF_DMAC_BEATSIZE_2 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_2 +#ifndef CONF_DMAC_SRC_INTERFACE_2 +#define CONF_DMAC_SRC_INTERFACE_2 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_2 +#ifndef CONF_DMAC_DES_INTERFACE_2 +#define CONF_DMAC_DES_INTERFACE_2 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_2 +#ifndef CONF_DMAC_SRCINC_2 +#define CONF_DMAC_SRCINC_2 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_2 +#ifndef CONF_DMAC_DSTINC_2 +#define CONF_DMAC_DSTINC_2 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_2 +#ifndef CONF_DMAC_TRANS_TYPE_2 +#define CONF_DMAC_TRANS_TYPE_2 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_2 +#ifndef CONF_DMAC_TRIGSRC_2 +#define CONF_DMAC_TRIGSRC_2 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_2 == 0 +#define CONF_DMAC_TYPE_2 0 +#define CONF_DMAC_DSYNC_2 0 +#elif CONF_DMAC_TRANS_TYPE_2 == 1 +#define CONF_DMAC_TYPE_2 1 +#define CONF_DMAC_DSYNC_2 0 +#elif CONF_DMAC_TRANS_TYPE_2 == 2 +#define CONF_DMAC_TYPE_2 1 +#define CONF_DMAC_DSYNC_2 1 +#endif + +#if CONF_DMAC_TRIGSRC_2 == 0xFF +#define CONF_DMAC_SWREQ_2 1 +#else +#define CONF_DMAC_SWREQ_2 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_2_SETTINGS == 1 && CONF_DMAC_BEATSIZE_2 != 2 && ((!CONF_DMAC_SRCINC_2) || (!CONF_DMAC_DSTINC_2))) +#if (!CONF_DMAC_SRCINC_2) +#define CONF_DMAC_SRC_STRIDE_2 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_2) +#define CONF_DMAC_DES_STRIDE_2 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_2 +#define CONF_DMAC_SRC_STRIDE_2 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_2 +#define CONF_DMAC_DES_STRIDE_2 0 +#endif + +// Channel 3 settings +// dmac_channel_3_settings +#ifndef CONF_DMAC_CHANNEL_3_SETTINGS +#define CONF_DMAC_CHANNEL_3_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_3 +#ifndef CONF_DMAC_BURSTSIZE_3 +#define CONF_DMAC_BURSTSIZE_3 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_3 +#ifndef CONF_DMAC_CHUNKSIZE_3 +#define CONF_DMAC_CHUNKSIZE_3 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_3 +#ifndef CONF_DMAC_BEATSIZE_3 +#define CONF_DMAC_BEATSIZE_3 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_3 +#ifndef CONF_DMAC_SRC_INTERFACE_3 +#define CONF_DMAC_SRC_INTERFACE_3 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_3 +#ifndef CONF_DMAC_DES_INTERFACE_3 +#define CONF_DMAC_DES_INTERFACE_3 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_3 +#ifndef CONF_DMAC_SRCINC_3 +#define CONF_DMAC_SRCINC_3 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_3 +#ifndef CONF_DMAC_DSTINC_3 +#define CONF_DMAC_DSTINC_3 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_3 +#ifndef CONF_DMAC_TRANS_TYPE_3 +#define CONF_DMAC_TRANS_TYPE_3 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_3 +#ifndef CONF_DMAC_TRIGSRC_3 +#define CONF_DMAC_TRIGSRC_3 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_3 == 0 +#define CONF_DMAC_TYPE_3 0 +#define CONF_DMAC_DSYNC_3 0 +#elif CONF_DMAC_TRANS_TYPE_3 == 1 +#define CONF_DMAC_TYPE_3 1 +#define CONF_DMAC_DSYNC_3 0 +#elif CONF_DMAC_TRANS_TYPE_3 == 2 +#define CONF_DMAC_TYPE_3 1 +#define CONF_DMAC_DSYNC_3 1 +#endif + +#if CONF_DMAC_TRIGSRC_3 == 0xFF +#define CONF_DMAC_SWREQ_3 1 +#else +#define CONF_DMAC_SWREQ_3 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_3_SETTINGS == 1 && CONF_DMAC_BEATSIZE_3 != 2 && ((!CONF_DMAC_SRCINC_3) || (!CONF_DMAC_DSTINC_3))) +#if (!CONF_DMAC_SRCINC_3) +#define CONF_DMAC_SRC_STRIDE_3 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_3) +#define CONF_DMAC_DES_STRIDE_3 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_3 +#define CONF_DMAC_SRC_STRIDE_3 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_3 +#define CONF_DMAC_DES_STRIDE_3 0 +#endif + +// Channel 4 settings +// dmac_channel_4_settings +#ifndef CONF_DMAC_CHANNEL_4_SETTINGS +#define CONF_DMAC_CHANNEL_4_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_4 +#ifndef CONF_DMAC_BURSTSIZE_4 +#define CONF_DMAC_BURSTSIZE_4 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_4 +#ifndef CONF_DMAC_CHUNKSIZE_4 +#define CONF_DMAC_CHUNKSIZE_4 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_4 +#ifndef CONF_DMAC_BEATSIZE_4 +#define CONF_DMAC_BEATSIZE_4 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_4 +#ifndef CONF_DMAC_SRC_INTERFACE_4 +#define CONF_DMAC_SRC_INTERFACE_4 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_4 +#ifndef CONF_DMAC_DES_INTERFACE_4 +#define CONF_DMAC_DES_INTERFACE_4 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_4 +#ifndef CONF_DMAC_SRCINC_4 +#define CONF_DMAC_SRCINC_4 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_4 +#ifndef CONF_DMAC_DSTINC_4 +#define CONF_DMAC_DSTINC_4 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_4 +#ifndef CONF_DMAC_TRANS_TYPE_4 +#define CONF_DMAC_TRANS_TYPE_4 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_4 +#ifndef CONF_DMAC_TRIGSRC_4 +#define CONF_DMAC_TRIGSRC_4 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_4 == 0 +#define CONF_DMAC_TYPE_4 0 +#define CONF_DMAC_DSYNC_4 0 +#elif CONF_DMAC_TRANS_TYPE_4 == 1 +#define CONF_DMAC_TYPE_4 1 +#define CONF_DMAC_DSYNC_4 0 +#elif CONF_DMAC_TRANS_TYPE_4 == 2 +#define CONF_DMAC_TYPE_4 1 +#define CONF_DMAC_DSYNC_4 1 +#endif + +#if CONF_DMAC_TRIGSRC_4 == 0xFF +#define CONF_DMAC_SWREQ_4 1 +#else +#define CONF_DMAC_SWREQ_4 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_4_SETTINGS == 1 && CONF_DMAC_BEATSIZE_4 != 2 && ((!CONF_DMAC_SRCINC_4) || (!CONF_DMAC_DSTINC_4))) +#if (!CONF_DMAC_SRCINC_4) +#define CONF_DMAC_SRC_STRIDE_4 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_4) +#define CONF_DMAC_DES_STRIDE_4 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_4 +#define CONF_DMAC_SRC_STRIDE_4 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_4 +#define CONF_DMAC_DES_STRIDE_4 0 +#endif + +// Channel 5 settings +// dmac_channel_5_settings +#ifndef CONF_DMAC_CHANNEL_5_SETTINGS +#define CONF_DMAC_CHANNEL_5_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_5 +#ifndef CONF_DMAC_BURSTSIZE_5 +#define CONF_DMAC_BURSTSIZE_5 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_5 +#ifndef CONF_DMAC_CHUNKSIZE_5 +#define CONF_DMAC_CHUNKSIZE_5 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_5 +#ifndef CONF_DMAC_BEATSIZE_5 +#define CONF_DMAC_BEATSIZE_5 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_5 +#ifndef CONF_DMAC_SRC_INTERFACE_5 +#define CONF_DMAC_SRC_INTERFACE_5 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_5 +#ifndef CONF_DMAC_DES_INTERFACE_5 +#define CONF_DMAC_DES_INTERFACE_5 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_5 +#ifndef CONF_DMAC_SRCINC_5 +#define CONF_DMAC_SRCINC_5 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_5 +#ifndef CONF_DMAC_DSTINC_5 +#define CONF_DMAC_DSTINC_5 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_5 +#ifndef CONF_DMAC_TRANS_TYPE_5 +#define CONF_DMAC_TRANS_TYPE_5 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_5 +#ifndef CONF_DMAC_TRIGSRC_5 +#define CONF_DMAC_TRIGSRC_5 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_5 == 0 +#define CONF_DMAC_TYPE_5 0 +#define CONF_DMAC_DSYNC_5 0 +#elif CONF_DMAC_TRANS_TYPE_5 == 1 +#define CONF_DMAC_TYPE_5 1 +#define CONF_DMAC_DSYNC_5 0 +#elif CONF_DMAC_TRANS_TYPE_5 == 2 +#define CONF_DMAC_TYPE_5 1 +#define CONF_DMAC_DSYNC_5 1 +#endif + +#if CONF_DMAC_TRIGSRC_5 == 0xFF +#define CONF_DMAC_SWREQ_5 1 +#else +#define CONF_DMAC_SWREQ_5 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_5_SETTINGS == 1 && CONF_DMAC_BEATSIZE_5 != 2 && ((!CONF_DMAC_SRCINC_5) || (!CONF_DMAC_DSTINC_5))) +#if (!CONF_DMAC_SRCINC_5) +#define CONF_DMAC_SRC_STRIDE_5 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_5) +#define CONF_DMAC_DES_STRIDE_5 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_5 +#define CONF_DMAC_SRC_STRIDE_5 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_5 +#define CONF_DMAC_DES_STRIDE_5 0 +#endif + +// Channel 6 settings +// dmac_channel_6_settings +#ifndef CONF_DMAC_CHANNEL_6_SETTINGS +#define CONF_DMAC_CHANNEL_6_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_6 +#ifndef CONF_DMAC_BURSTSIZE_6 +#define CONF_DMAC_BURSTSIZE_6 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_6 +#ifndef CONF_DMAC_CHUNKSIZE_6 +#define CONF_DMAC_CHUNKSIZE_6 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_6 +#ifndef CONF_DMAC_BEATSIZE_6 +#define CONF_DMAC_BEATSIZE_6 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_6 +#ifndef CONF_DMAC_SRC_INTERFACE_6 +#define CONF_DMAC_SRC_INTERFACE_6 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_6 +#ifndef CONF_DMAC_DES_INTERFACE_6 +#define CONF_DMAC_DES_INTERFACE_6 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_6 +#ifndef CONF_DMAC_SRCINC_6 +#define CONF_DMAC_SRCINC_6 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_6 +#ifndef CONF_DMAC_DSTINC_6 +#define CONF_DMAC_DSTINC_6 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_6 +#ifndef CONF_DMAC_TRANS_TYPE_6 +#define CONF_DMAC_TRANS_TYPE_6 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_6 +#ifndef CONF_DMAC_TRIGSRC_6 +#define CONF_DMAC_TRIGSRC_6 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_6 == 0 +#define CONF_DMAC_TYPE_6 0 +#define CONF_DMAC_DSYNC_6 0 +#elif CONF_DMAC_TRANS_TYPE_6 == 1 +#define CONF_DMAC_TYPE_6 1 +#define CONF_DMAC_DSYNC_6 0 +#elif CONF_DMAC_TRANS_TYPE_6 == 2 +#define CONF_DMAC_TYPE_6 1 +#define CONF_DMAC_DSYNC_6 1 +#endif + +#if CONF_DMAC_TRIGSRC_6 == 0xFF +#define CONF_DMAC_SWREQ_6 1 +#else +#define CONF_DMAC_SWREQ_6 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_6_SETTINGS == 1 && CONF_DMAC_BEATSIZE_6 != 2 && ((!CONF_DMAC_SRCINC_6) || (!CONF_DMAC_DSTINC_6))) +#if (!CONF_DMAC_SRCINC_6) +#define CONF_DMAC_SRC_STRIDE_6 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_6) +#define CONF_DMAC_DES_STRIDE_6 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_6 +#define CONF_DMAC_SRC_STRIDE_6 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_6 +#define CONF_DMAC_DES_STRIDE_6 0 +#endif + +// Channel 7 settings +// dmac_channel_7_settings +#ifndef CONF_DMAC_CHANNEL_7_SETTINGS +#define CONF_DMAC_CHANNEL_7_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_7 +#ifndef CONF_DMAC_BURSTSIZE_7 +#define CONF_DMAC_BURSTSIZE_7 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_7 +#ifndef CONF_DMAC_CHUNKSIZE_7 +#define CONF_DMAC_CHUNKSIZE_7 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_7 +#ifndef CONF_DMAC_BEATSIZE_7 +#define CONF_DMAC_BEATSIZE_7 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_7 +#ifndef CONF_DMAC_SRC_INTERFACE_7 +#define CONF_DMAC_SRC_INTERFACE_7 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_7 +#ifndef CONF_DMAC_DES_INTERFACE_7 +#define CONF_DMAC_DES_INTERFACE_7 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_7 +#ifndef CONF_DMAC_SRCINC_7 +#define CONF_DMAC_SRCINC_7 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_7 +#ifndef CONF_DMAC_DSTINC_7 +#define CONF_DMAC_DSTINC_7 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_7 +#ifndef CONF_DMAC_TRANS_TYPE_7 +#define CONF_DMAC_TRANS_TYPE_7 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_7 +#ifndef CONF_DMAC_TRIGSRC_7 +#define CONF_DMAC_TRIGSRC_7 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_7 == 0 +#define CONF_DMAC_TYPE_7 0 +#define CONF_DMAC_DSYNC_7 0 +#elif CONF_DMAC_TRANS_TYPE_7 == 1 +#define CONF_DMAC_TYPE_7 1 +#define CONF_DMAC_DSYNC_7 0 +#elif CONF_DMAC_TRANS_TYPE_7 == 2 +#define CONF_DMAC_TYPE_7 1 +#define CONF_DMAC_DSYNC_7 1 +#endif + +#if CONF_DMAC_TRIGSRC_7 == 0xFF +#define CONF_DMAC_SWREQ_7 1 +#else +#define CONF_DMAC_SWREQ_7 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_7_SETTINGS == 1 && CONF_DMAC_BEATSIZE_7 != 2 && ((!CONF_DMAC_SRCINC_7) || (!CONF_DMAC_DSTINC_7))) +#if (!CONF_DMAC_SRCINC_7) +#define CONF_DMAC_SRC_STRIDE_7 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_7) +#define CONF_DMAC_DES_STRIDE_7 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_7 +#define CONF_DMAC_SRC_STRIDE_7 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_7 +#define CONF_DMAC_DES_STRIDE_7 0 +#endif + +// Channel 8 settings +// dmac_channel_8_settings +#ifndef CONF_DMAC_CHANNEL_8_SETTINGS +#define CONF_DMAC_CHANNEL_8_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_8 +#ifndef CONF_DMAC_BURSTSIZE_8 +#define CONF_DMAC_BURSTSIZE_8 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_8 +#ifndef CONF_DMAC_CHUNKSIZE_8 +#define CONF_DMAC_CHUNKSIZE_8 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_8 +#ifndef CONF_DMAC_BEATSIZE_8 +#define CONF_DMAC_BEATSIZE_8 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_8 +#ifndef CONF_DMAC_SRC_INTERFACE_8 +#define CONF_DMAC_SRC_INTERFACE_8 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_8 +#ifndef CONF_DMAC_DES_INTERFACE_8 +#define CONF_DMAC_DES_INTERFACE_8 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_8 +#ifndef CONF_DMAC_SRCINC_8 +#define CONF_DMAC_SRCINC_8 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_8 +#ifndef CONF_DMAC_DSTINC_8 +#define CONF_DMAC_DSTINC_8 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_8 +#ifndef CONF_DMAC_TRANS_TYPE_8 +#define CONF_DMAC_TRANS_TYPE_8 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_8 +#ifndef CONF_DMAC_TRIGSRC_8 +#define CONF_DMAC_TRIGSRC_8 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_8 == 0 +#define CONF_DMAC_TYPE_8 0 +#define CONF_DMAC_DSYNC_8 0 +#elif CONF_DMAC_TRANS_TYPE_8 == 1 +#define CONF_DMAC_TYPE_8 1 +#define CONF_DMAC_DSYNC_8 0 +#elif CONF_DMAC_TRANS_TYPE_8 == 2 +#define CONF_DMAC_TYPE_8 1 +#define CONF_DMAC_DSYNC_8 1 +#endif + +#if CONF_DMAC_TRIGSRC_8 == 0xFF +#define CONF_DMAC_SWREQ_8 1 +#else +#define CONF_DMAC_SWREQ_8 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_8_SETTINGS == 1 && CONF_DMAC_BEATSIZE_8 != 2 && ((!CONF_DMAC_SRCINC_8) || (!CONF_DMAC_DSTINC_8))) +#if (!CONF_DMAC_SRCINC_8) +#define CONF_DMAC_SRC_STRIDE_8 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_8) +#define CONF_DMAC_DES_STRIDE_8 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_8 +#define CONF_DMAC_SRC_STRIDE_8 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_8 +#define CONF_DMAC_DES_STRIDE_8 0 +#endif + +// Channel 9 settings +// dmac_channel_9_settings +#ifndef CONF_DMAC_CHANNEL_9_SETTINGS +#define CONF_DMAC_CHANNEL_9_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_9 +#ifndef CONF_DMAC_BURSTSIZE_9 +#define CONF_DMAC_BURSTSIZE_9 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_9 +#ifndef CONF_DMAC_CHUNKSIZE_9 +#define CONF_DMAC_CHUNKSIZE_9 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_9 +#ifndef CONF_DMAC_BEATSIZE_9 +#define CONF_DMAC_BEATSIZE_9 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_9 +#ifndef CONF_DMAC_SRC_INTERFACE_9 +#define CONF_DMAC_SRC_INTERFACE_9 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_9 +#ifndef CONF_DMAC_DES_INTERFACE_9 +#define CONF_DMAC_DES_INTERFACE_9 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_9 +#ifndef CONF_DMAC_SRCINC_9 +#define CONF_DMAC_SRCINC_9 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_9 +#ifndef CONF_DMAC_DSTINC_9 +#define CONF_DMAC_DSTINC_9 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_9 +#ifndef CONF_DMAC_TRANS_TYPE_9 +#define CONF_DMAC_TRANS_TYPE_9 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_9 +#ifndef CONF_DMAC_TRIGSRC_9 +#define CONF_DMAC_TRIGSRC_9 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_9 == 0 +#define CONF_DMAC_TYPE_9 0 +#define CONF_DMAC_DSYNC_9 0 +#elif CONF_DMAC_TRANS_TYPE_9 == 1 +#define CONF_DMAC_TYPE_9 1 +#define CONF_DMAC_DSYNC_9 0 +#elif CONF_DMAC_TRANS_TYPE_9 == 2 +#define CONF_DMAC_TYPE_9 1 +#define CONF_DMAC_DSYNC_9 1 +#endif + +#if CONF_DMAC_TRIGSRC_9 == 0xFF +#define CONF_DMAC_SWREQ_9 1 +#else +#define CONF_DMAC_SWREQ_9 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_9_SETTINGS == 1 && CONF_DMAC_BEATSIZE_9 != 2 && ((!CONF_DMAC_SRCINC_9) || (!CONF_DMAC_DSTINC_9))) +#if (!CONF_DMAC_SRCINC_9) +#define CONF_DMAC_SRC_STRIDE_9 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_9) +#define CONF_DMAC_DES_STRIDE_9 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_9 +#define CONF_DMAC_SRC_STRIDE_9 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_9 +#define CONF_DMAC_DES_STRIDE_9 0 +#endif + +// Channel 10 settings +// dmac_channel_10_settings +#ifndef CONF_DMAC_CHANNEL_10_SETTINGS +#define CONF_DMAC_CHANNEL_10_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_10 +#ifndef CONF_DMAC_BURSTSIZE_10 +#define CONF_DMAC_BURSTSIZE_10 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_10 +#ifndef CONF_DMAC_CHUNKSIZE_10 +#define CONF_DMAC_CHUNKSIZE_10 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_10 +#ifndef CONF_DMAC_BEATSIZE_10 +#define CONF_DMAC_BEATSIZE_10 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_10 +#ifndef CONF_DMAC_SRC_INTERFACE_10 +#define CONF_DMAC_SRC_INTERFACE_10 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_10 +#ifndef CONF_DMAC_DES_INTERFACE_10 +#define CONF_DMAC_DES_INTERFACE_10 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_10 +#ifndef CONF_DMAC_SRCINC_10 +#define CONF_DMAC_SRCINC_10 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_10 +#ifndef CONF_DMAC_DSTINC_10 +#define CONF_DMAC_DSTINC_10 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_10 +#ifndef CONF_DMAC_TRANS_TYPE_10 +#define CONF_DMAC_TRANS_TYPE_10 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_10 +#ifndef CONF_DMAC_TRIGSRC_10 +#define CONF_DMAC_TRIGSRC_10 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_10 == 0 +#define CONF_DMAC_TYPE_10 0 +#define CONF_DMAC_DSYNC_10 0 +#elif CONF_DMAC_TRANS_TYPE_10 == 1 +#define CONF_DMAC_TYPE_10 1 +#define CONF_DMAC_DSYNC_10 0 +#elif CONF_DMAC_TRANS_TYPE_10 == 2 +#define CONF_DMAC_TYPE_10 1 +#define CONF_DMAC_DSYNC_10 1 +#endif + +#if CONF_DMAC_TRIGSRC_10 == 0xFF +#define CONF_DMAC_SWREQ_10 1 +#else +#define CONF_DMAC_SWREQ_10 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_10_SETTINGS == 1 && CONF_DMAC_BEATSIZE_10 != 2 \ + && ((!CONF_DMAC_SRCINC_10) || (!CONF_DMAC_DSTINC_10))) +#if (!CONF_DMAC_SRCINC_10) +#define CONF_DMAC_SRC_STRIDE_10 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_10) +#define CONF_DMAC_DES_STRIDE_10 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_10 +#define CONF_DMAC_SRC_STRIDE_10 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_10 +#define CONF_DMAC_DES_STRIDE_10 0 +#endif + +// Channel 11 settings +// dmac_channel_11_settings +#ifndef CONF_DMAC_CHANNEL_11_SETTINGS +#define CONF_DMAC_CHANNEL_11_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_11 +#ifndef CONF_DMAC_BURSTSIZE_11 +#define CONF_DMAC_BURSTSIZE_11 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_11 +#ifndef CONF_DMAC_CHUNKSIZE_11 +#define CONF_DMAC_CHUNKSIZE_11 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_11 +#ifndef CONF_DMAC_BEATSIZE_11 +#define CONF_DMAC_BEATSIZE_11 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_11 +#ifndef CONF_DMAC_SRC_INTERFACE_11 +#define CONF_DMAC_SRC_INTERFACE_11 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_11 +#ifndef CONF_DMAC_DES_INTERFACE_11 +#define CONF_DMAC_DES_INTERFACE_11 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_11 +#ifndef CONF_DMAC_SRCINC_11 +#define CONF_DMAC_SRCINC_11 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_11 +#ifndef CONF_DMAC_DSTINC_11 +#define CONF_DMAC_DSTINC_11 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_11 +#ifndef CONF_DMAC_TRANS_TYPE_11 +#define CONF_DMAC_TRANS_TYPE_11 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_11 +#ifndef CONF_DMAC_TRIGSRC_11 +#define CONF_DMAC_TRIGSRC_11 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_11 == 0 +#define CONF_DMAC_TYPE_11 0 +#define CONF_DMAC_DSYNC_11 0 +#elif CONF_DMAC_TRANS_TYPE_11 == 1 +#define CONF_DMAC_TYPE_11 1 +#define CONF_DMAC_DSYNC_11 0 +#elif CONF_DMAC_TRANS_TYPE_11 == 2 +#define CONF_DMAC_TYPE_11 1 +#define CONF_DMAC_DSYNC_11 1 +#endif + +#if CONF_DMAC_TRIGSRC_11 == 0xFF +#define CONF_DMAC_SWREQ_11 1 +#else +#define CONF_DMAC_SWREQ_11 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_11_SETTINGS == 1 && CONF_DMAC_BEATSIZE_11 != 2 \ + && ((!CONF_DMAC_SRCINC_11) || (!CONF_DMAC_DSTINC_11))) +#if (!CONF_DMAC_SRCINC_11) +#define CONF_DMAC_SRC_STRIDE_11 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_11) +#define CONF_DMAC_DES_STRIDE_11 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_11 +#define CONF_DMAC_SRC_STRIDE_11 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_11 +#define CONF_DMAC_DES_STRIDE_11 0 +#endif + +// Channel 12 settings +// dmac_channel_12_settings +#ifndef CONF_DMAC_CHANNEL_12_SETTINGS +#define CONF_DMAC_CHANNEL_12_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_12 +#ifndef CONF_DMAC_BURSTSIZE_12 +#define CONF_DMAC_BURSTSIZE_12 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_12 +#ifndef CONF_DMAC_CHUNKSIZE_12 +#define CONF_DMAC_CHUNKSIZE_12 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_12 +#ifndef CONF_DMAC_BEATSIZE_12 +#define CONF_DMAC_BEATSIZE_12 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_12 +#ifndef CONF_DMAC_SRC_INTERFACE_12 +#define CONF_DMAC_SRC_INTERFACE_12 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_12 +#ifndef CONF_DMAC_DES_INTERFACE_12 +#define CONF_DMAC_DES_INTERFACE_12 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_12 +#ifndef CONF_DMAC_SRCINC_12 +#define CONF_DMAC_SRCINC_12 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_12 +#ifndef CONF_DMAC_DSTINC_12 +#define CONF_DMAC_DSTINC_12 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_12 +#ifndef CONF_DMAC_TRANS_TYPE_12 +#define CONF_DMAC_TRANS_TYPE_12 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_12 +#ifndef CONF_DMAC_TRIGSRC_12 +#define CONF_DMAC_TRIGSRC_12 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_12 == 0 +#define CONF_DMAC_TYPE_12 0 +#define CONF_DMAC_DSYNC_12 0 +#elif CONF_DMAC_TRANS_TYPE_12 == 1 +#define CONF_DMAC_TYPE_12 1 +#define CONF_DMAC_DSYNC_12 0 +#elif CONF_DMAC_TRANS_TYPE_12 == 2 +#define CONF_DMAC_TYPE_12 1 +#define CONF_DMAC_DSYNC_12 1 +#endif + +#if CONF_DMAC_TRIGSRC_12 == 0xFF +#define CONF_DMAC_SWREQ_12 1 +#else +#define CONF_DMAC_SWREQ_12 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_12_SETTINGS == 1 && CONF_DMAC_BEATSIZE_12 != 2 \ + && ((!CONF_DMAC_SRCINC_12) || (!CONF_DMAC_DSTINC_12))) +#if (!CONF_DMAC_SRCINC_12) +#define CONF_DMAC_SRC_STRIDE_12 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_12) +#define CONF_DMAC_DES_STRIDE_12 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_12 +#define CONF_DMAC_SRC_STRIDE_12 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_12 +#define CONF_DMAC_DES_STRIDE_12 0 +#endif + +// Channel 13 settings +// dmac_channel_13_settings +#ifndef CONF_DMAC_CHANNEL_13_SETTINGS +#define CONF_DMAC_CHANNEL_13_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_13 +#ifndef CONF_DMAC_BURSTSIZE_13 +#define CONF_DMAC_BURSTSIZE_13 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_13 +#ifndef CONF_DMAC_CHUNKSIZE_13 +#define CONF_DMAC_CHUNKSIZE_13 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_13 +#ifndef CONF_DMAC_BEATSIZE_13 +#define CONF_DMAC_BEATSIZE_13 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_13 +#ifndef CONF_DMAC_SRC_INTERFACE_13 +#define CONF_DMAC_SRC_INTERFACE_13 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_13 +#ifndef CONF_DMAC_DES_INTERFACE_13 +#define CONF_DMAC_DES_INTERFACE_13 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_13 +#ifndef CONF_DMAC_SRCINC_13 +#define CONF_DMAC_SRCINC_13 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_13 +#ifndef CONF_DMAC_DSTINC_13 +#define CONF_DMAC_DSTINC_13 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_13 +#ifndef CONF_DMAC_TRANS_TYPE_13 +#define CONF_DMAC_TRANS_TYPE_13 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_13 +#ifndef CONF_DMAC_TRIGSRC_13 +#define CONF_DMAC_TRIGSRC_13 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_13 == 0 +#define CONF_DMAC_TYPE_13 0 +#define CONF_DMAC_DSYNC_13 0 +#elif CONF_DMAC_TRANS_TYPE_13 == 1 +#define CONF_DMAC_TYPE_13 1 +#define CONF_DMAC_DSYNC_13 0 +#elif CONF_DMAC_TRANS_TYPE_13 == 2 +#define CONF_DMAC_TYPE_13 1 +#define CONF_DMAC_DSYNC_13 1 +#endif + +#if CONF_DMAC_TRIGSRC_13 == 0xFF +#define CONF_DMAC_SWREQ_13 1 +#else +#define CONF_DMAC_SWREQ_13 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_13_SETTINGS == 1 && CONF_DMAC_BEATSIZE_13 != 2 \ + && ((!CONF_DMAC_SRCINC_13) || (!CONF_DMAC_DSTINC_13))) +#if (!CONF_DMAC_SRCINC_13) +#define CONF_DMAC_SRC_STRIDE_13 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_13) +#define CONF_DMAC_DES_STRIDE_13 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_13 +#define CONF_DMAC_SRC_STRIDE_13 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_13 +#define CONF_DMAC_DES_STRIDE_13 0 +#endif + +// Channel 14 settings +// dmac_channel_14_settings +#ifndef CONF_DMAC_CHANNEL_14_SETTINGS +#define CONF_DMAC_CHANNEL_14_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_14 +#ifndef CONF_DMAC_BURSTSIZE_14 +#define CONF_DMAC_BURSTSIZE_14 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_14 +#ifndef CONF_DMAC_CHUNKSIZE_14 +#define CONF_DMAC_CHUNKSIZE_14 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_14 +#ifndef CONF_DMAC_BEATSIZE_14 +#define CONF_DMAC_BEATSIZE_14 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_14 +#ifndef CONF_DMAC_SRC_INTERFACE_14 +#define CONF_DMAC_SRC_INTERFACE_14 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_14 +#ifndef CONF_DMAC_DES_INTERFACE_14 +#define CONF_DMAC_DES_INTERFACE_14 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_14 +#ifndef CONF_DMAC_SRCINC_14 +#define CONF_DMAC_SRCINC_14 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_14 +#ifndef CONF_DMAC_DSTINC_14 +#define CONF_DMAC_DSTINC_14 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_14 +#ifndef CONF_DMAC_TRANS_TYPE_14 +#define CONF_DMAC_TRANS_TYPE_14 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_14 +#ifndef CONF_DMAC_TRIGSRC_14 +#define CONF_DMAC_TRIGSRC_14 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_14 == 0 +#define CONF_DMAC_TYPE_14 0 +#define CONF_DMAC_DSYNC_14 0 +#elif CONF_DMAC_TRANS_TYPE_14 == 1 +#define CONF_DMAC_TYPE_14 1 +#define CONF_DMAC_DSYNC_14 0 +#elif CONF_DMAC_TRANS_TYPE_14 == 2 +#define CONF_DMAC_TYPE_14 1 +#define CONF_DMAC_DSYNC_14 1 +#endif + +#if CONF_DMAC_TRIGSRC_14 == 0xFF +#define CONF_DMAC_SWREQ_14 1 +#else +#define CONF_DMAC_SWREQ_14 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_14_SETTINGS == 1 && CONF_DMAC_BEATSIZE_14 != 2 \ + && ((!CONF_DMAC_SRCINC_14) || (!CONF_DMAC_DSTINC_14))) +#if (!CONF_DMAC_SRCINC_14) +#define CONF_DMAC_SRC_STRIDE_14 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_14) +#define CONF_DMAC_DES_STRIDE_14 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_14 +#define CONF_DMAC_SRC_STRIDE_14 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_14 +#define CONF_DMAC_DES_STRIDE_14 0 +#endif + +// Channel 15 settings +// dmac_channel_15_settings +#ifndef CONF_DMAC_CHANNEL_15_SETTINGS +#define CONF_DMAC_CHANNEL_15_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_15 +#ifndef CONF_DMAC_BURSTSIZE_15 +#define CONF_DMAC_BURSTSIZE_15 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_15 +#ifndef CONF_DMAC_CHUNKSIZE_15 +#define CONF_DMAC_CHUNKSIZE_15 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_15 +#ifndef CONF_DMAC_BEATSIZE_15 +#define CONF_DMAC_BEATSIZE_15 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_15 +#ifndef CONF_DMAC_SRC_INTERFACE_15 +#define CONF_DMAC_SRC_INTERFACE_15 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_15 +#ifndef CONF_DMAC_DES_INTERFACE_15 +#define CONF_DMAC_DES_INTERFACE_15 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_15 +#ifndef CONF_DMAC_SRCINC_15 +#define CONF_DMAC_SRCINC_15 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_15 +#ifndef CONF_DMAC_DSTINC_15 +#define CONF_DMAC_DSTINC_15 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_15 +#ifndef CONF_DMAC_TRANS_TYPE_15 +#define CONF_DMAC_TRANS_TYPE_15 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_15 +#ifndef CONF_DMAC_TRIGSRC_15 +#define CONF_DMAC_TRIGSRC_15 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_15 == 0 +#define CONF_DMAC_TYPE_15 0 +#define CONF_DMAC_DSYNC_15 0 +#elif CONF_DMAC_TRANS_TYPE_15 == 1 +#define CONF_DMAC_TYPE_15 1 +#define CONF_DMAC_DSYNC_15 0 +#elif CONF_DMAC_TRANS_TYPE_15 == 2 +#define CONF_DMAC_TYPE_15 1 +#define CONF_DMAC_DSYNC_15 1 +#endif + +#if CONF_DMAC_TRIGSRC_15 == 0xFF +#define CONF_DMAC_SWREQ_15 1 +#else +#define CONF_DMAC_SWREQ_15 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_15_SETTINGS == 1 && CONF_DMAC_BEATSIZE_15 != 2 \ + && ((!CONF_DMAC_SRCINC_15) || (!CONF_DMAC_DSTINC_15))) +#if (!CONF_DMAC_SRCINC_15) +#define CONF_DMAC_SRC_STRIDE_15 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_15) +#define CONF_DMAC_DES_STRIDE_15 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_15 +#define CONF_DMAC_SRC_STRIDE_15 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_15 +#define CONF_DMAC_DES_STRIDE_15 0 +#endif + +// Channel 16 settings +// dmac_channel_16_settings +#ifndef CONF_DMAC_CHANNEL_16_SETTINGS +#define CONF_DMAC_CHANNEL_16_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_16 +#ifndef CONF_DMAC_BURSTSIZE_16 +#define CONF_DMAC_BURSTSIZE_16 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_16 +#ifndef CONF_DMAC_CHUNKSIZE_16 +#define CONF_DMAC_CHUNKSIZE_16 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_16 +#ifndef CONF_DMAC_BEATSIZE_16 +#define CONF_DMAC_BEATSIZE_16 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_16 +#ifndef CONF_DMAC_SRC_INTERFACE_16 +#define CONF_DMAC_SRC_INTERFACE_16 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_16 +#ifndef CONF_DMAC_DES_INTERFACE_16 +#define CONF_DMAC_DES_INTERFACE_16 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_16 +#ifndef CONF_DMAC_SRCINC_16 +#define CONF_DMAC_SRCINC_16 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_16 +#ifndef CONF_DMAC_DSTINC_16 +#define CONF_DMAC_DSTINC_16 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_16 +#ifndef CONF_DMAC_TRANS_TYPE_16 +#define CONF_DMAC_TRANS_TYPE_16 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_16 +#ifndef CONF_DMAC_TRIGSRC_16 +#define CONF_DMAC_TRIGSRC_16 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_16 == 0 +#define CONF_DMAC_TYPE_16 0 +#define CONF_DMAC_DSYNC_16 0 +#elif CONF_DMAC_TRANS_TYPE_16 == 1 +#define CONF_DMAC_TYPE_16 1 +#define CONF_DMAC_DSYNC_16 0 +#elif CONF_DMAC_TRANS_TYPE_16 == 2 +#define CONF_DMAC_TYPE_16 1 +#define CONF_DMAC_DSYNC_16 1 +#endif + +#if CONF_DMAC_TRIGSRC_16 == 0xFF +#define CONF_DMAC_SWREQ_16 1 +#else +#define CONF_DMAC_SWREQ_16 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_16_SETTINGS == 1 && CONF_DMAC_BEATSIZE_16 != 2 \ + && ((!CONF_DMAC_SRCINC_16) || (!CONF_DMAC_DSTINC_16))) +#if (!CONF_DMAC_SRCINC_16) +#define CONF_DMAC_SRC_STRIDE_16 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_16) +#define CONF_DMAC_DES_STRIDE_16 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_16 +#define CONF_DMAC_SRC_STRIDE_16 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_16 +#define CONF_DMAC_DES_STRIDE_16 0 +#endif + +// Channel 17 settings +// dmac_channel_17_settings +#ifndef CONF_DMAC_CHANNEL_17_SETTINGS +#define CONF_DMAC_CHANNEL_17_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_17 +#ifndef CONF_DMAC_BURSTSIZE_17 +#define CONF_DMAC_BURSTSIZE_17 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_17 +#ifndef CONF_DMAC_CHUNKSIZE_17 +#define CONF_DMAC_CHUNKSIZE_17 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_17 +#ifndef CONF_DMAC_BEATSIZE_17 +#define CONF_DMAC_BEATSIZE_17 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_17 +#ifndef CONF_DMAC_SRC_INTERFACE_17 +#define CONF_DMAC_SRC_INTERFACE_17 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_17 +#ifndef CONF_DMAC_DES_INTERFACE_17 +#define CONF_DMAC_DES_INTERFACE_17 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_17 +#ifndef CONF_DMAC_SRCINC_17 +#define CONF_DMAC_SRCINC_17 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_17 +#ifndef CONF_DMAC_DSTINC_17 +#define CONF_DMAC_DSTINC_17 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_17 +#ifndef CONF_DMAC_TRANS_TYPE_17 +#define CONF_DMAC_TRANS_TYPE_17 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_17 +#ifndef CONF_DMAC_TRIGSRC_17 +#define CONF_DMAC_TRIGSRC_17 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_17 == 0 +#define CONF_DMAC_TYPE_17 0 +#define CONF_DMAC_DSYNC_17 0 +#elif CONF_DMAC_TRANS_TYPE_17 == 1 +#define CONF_DMAC_TYPE_17 1 +#define CONF_DMAC_DSYNC_17 0 +#elif CONF_DMAC_TRANS_TYPE_17 == 2 +#define CONF_DMAC_TYPE_17 1 +#define CONF_DMAC_DSYNC_17 1 +#endif + +#if CONF_DMAC_TRIGSRC_17 == 0xFF +#define CONF_DMAC_SWREQ_17 1 +#else +#define CONF_DMAC_SWREQ_17 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_17_SETTINGS == 1 && CONF_DMAC_BEATSIZE_17 != 2 \ + && ((!CONF_DMAC_SRCINC_17) || (!CONF_DMAC_DSTINC_17))) +#if (!CONF_DMAC_SRCINC_17) +#define CONF_DMAC_SRC_STRIDE_17 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_17) +#define CONF_DMAC_DES_STRIDE_17 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_17 +#define CONF_DMAC_SRC_STRIDE_17 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_17 +#define CONF_DMAC_DES_STRIDE_17 0 +#endif + +// Channel 18 settings +// dmac_channel_18_settings +#ifndef CONF_DMAC_CHANNEL_18_SETTINGS +#define CONF_DMAC_CHANNEL_18_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_18 +#ifndef CONF_DMAC_BURSTSIZE_18 +#define CONF_DMAC_BURSTSIZE_18 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_18 +#ifndef CONF_DMAC_CHUNKSIZE_18 +#define CONF_DMAC_CHUNKSIZE_18 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_18 +#ifndef CONF_DMAC_BEATSIZE_18 +#define CONF_DMAC_BEATSIZE_18 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_18 +#ifndef CONF_DMAC_SRC_INTERFACE_18 +#define CONF_DMAC_SRC_INTERFACE_18 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_18 +#ifndef CONF_DMAC_DES_INTERFACE_18 +#define CONF_DMAC_DES_INTERFACE_18 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_18 +#ifndef CONF_DMAC_SRCINC_18 +#define CONF_DMAC_SRCINC_18 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_18 +#ifndef CONF_DMAC_DSTINC_18 +#define CONF_DMAC_DSTINC_18 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_18 +#ifndef CONF_DMAC_TRANS_TYPE_18 +#define CONF_DMAC_TRANS_TYPE_18 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_18 +#ifndef CONF_DMAC_TRIGSRC_18 +#define CONF_DMAC_TRIGSRC_18 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_18 == 0 +#define CONF_DMAC_TYPE_18 0 +#define CONF_DMAC_DSYNC_18 0 +#elif CONF_DMAC_TRANS_TYPE_18 == 1 +#define CONF_DMAC_TYPE_18 1 +#define CONF_DMAC_DSYNC_18 0 +#elif CONF_DMAC_TRANS_TYPE_18 == 2 +#define CONF_DMAC_TYPE_18 1 +#define CONF_DMAC_DSYNC_18 1 +#endif + +#if CONF_DMAC_TRIGSRC_18 == 0xFF +#define CONF_DMAC_SWREQ_18 1 +#else +#define CONF_DMAC_SWREQ_18 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_18_SETTINGS == 1 && CONF_DMAC_BEATSIZE_18 != 2 \ + && ((!CONF_DMAC_SRCINC_18) || (!CONF_DMAC_DSTINC_18))) +#if (!CONF_DMAC_SRCINC_18) +#define CONF_DMAC_SRC_STRIDE_18 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_18) +#define CONF_DMAC_DES_STRIDE_18 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_18 +#define CONF_DMAC_SRC_STRIDE_18 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_18 +#define CONF_DMAC_DES_STRIDE_18 0 +#endif + +// Channel 19 settings +// dmac_channel_19_settings +#ifndef CONF_DMAC_CHANNEL_19_SETTINGS +#define CONF_DMAC_CHANNEL_19_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_19 +#ifndef CONF_DMAC_BURSTSIZE_19 +#define CONF_DMAC_BURSTSIZE_19 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_19 +#ifndef CONF_DMAC_CHUNKSIZE_19 +#define CONF_DMAC_CHUNKSIZE_19 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_19 +#ifndef CONF_DMAC_BEATSIZE_19 +#define CONF_DMAC_BEATSIZE_19 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_19 +#ifndef CONF_DMAC_SRC_INTERFACE_19 +#define CONF_DMAC_SRC_INTERFACE_19 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_19 +#ifndef CONF_DMAC_DES_INTERFACE_19 +#define CONF_DMAC_DES_INTERFACE_19 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_19 +#ifndef CONF_DMAC_SRCINC_19 +#define CONF_DMAC_SRCINC_19 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_19 +#ifndef CONF_DMAC_DSTINC_19 +#define CONF_DMAC_DSTINC_19 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_19 +#ifndef CONF_DMAC_TRANS_TYPE_19 +#define CONF_DMAC_TRANS_TYPE_19 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_19 +#ifndef CONF_DMAC_TRIGSRC_19 +#define CONF_DMAC_TRIGSRC_19 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_19 == 0 +#define CONF_DMAC_TYPE_19 0 +#define CONF_DMAC_DSYNC_19 0 +#elif CONF_DMAC_TRANS_TYPE_19 == 1 +#define CONF_DMAC_TYPE_19 1 +#define CONF_DMAC_DSYNC_19 0 +#elif CONF_DMAC_TRANS_TYPE_19 == 2 +#define CONF_DMAC_TYPE_19 1 +#define CONF_DMAC_DSYNC_19 1 +#endif + +#if CONF_DMAC_TRIGSRC_19 == 0xFF +#define CONF_DMAC_SWREQ_19 1 +#else +#define CONF_DMAC_SWREQ_19 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_19_SETTINGS == 1 && CONF_DMAC_BEATSIZE_19 != 2 \ + && ((!CONF_DMAC_SRCINC_19) || (!CONF_DMAC_DSTINC_19))) +#if (!CONF_DMAC_SRCINC_19) +#define CONF_DMAC_SRC_STRIDE_19 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_19) +#define CONF_DMAC_DES_STRIDE_19 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_19 +#define CONF_DMAC_SRC_STRIDE_19 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_19 +#define CONF_DMAC_DES_STRIDE_19 0 +#endif + +// Channel 20 settings +// dmac_channel_20_settings +#ifndef CONF_DMAC_CHANNEL_20_SETTINGS +#define CONF_DMAC_CHANNEL_20_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_20 +#ifndef CONF_DMAC_BURSTSIZE_20 +#define CONF_DMAC_BURSTSIZE_20 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_20 +#ifndef CONF_DMAC_CHUNKSIZE_20 +#define CONF_DMAC_CHUNKSIZE_20 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_20 +#ifndef CONF_DMAC_BEATSIZE_20 +#define CONF_DMAC_BEATSIZE_20 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_20 +#ifndef CONF_DMAC_SRC_INTERFACE_20 +#define CONF_DMAC_SRC_INTERFACE_20 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_20 +#ifndef CONF_DMAC_DES_INTERFACE_20 +#define CONF_DMAC_DES_INTERFACE_20 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_20 +#ifndef CONF_DMAC_SRCINC_20 +#define CONF_DMAC_SRCINC_20 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_20 +#ifndef CONF_DMAC_DSTINC_20 +#define CONF_DMAC_DSTINC_20 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_20 +#ifndef CONF_DMAC_TRANS_TYPE_20 +#define CONF_DMAC_TRANS_TYPE_20 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_20 +#ifndef CONF_DMAC_TRIGSRC_20 +#define CONF_DMAC_TRIGSRC_20 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_20 == 0 +#define CONF_DMAC_TYPE_20 0 +#define CONF_DMAC_DSYNC_20 0 +#elif CONF_DMAC_TRANS_TYPE_20 == 1 +#define CONF_DMAC_TYPE_20 1 +#define CONF_DMAC_DSYNC_20 0 +#elif CONF_DMAC_TRANS_TYPE_20 == 2 +#define CONF_DMAC_TYPE_20 1 +#define CONF_DMAC_DSYNC_20 1 +#endif + +#if CONF_DMAC_TRIGSRC_20 == 0xFF +#define CONF_DMAC_SWREQ_20 1 +#else +#define CONF_DMAC_SWREQ_20 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_20_SETTINGS == 1 && CONF_DMAC_BEATSIZE_20 != 2 \ + && ((!CONF_DMAC_SRCINC_20) || (!CONF_DMAC_DSTINC_20))) +#if (!CONF_DMAC_SRCINC_20) +#define CONF_DMAC_SRC_STRIDE_20 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_20) +#define CONF_DMAC_DES_STRIDE_20 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_20 +#define CONF_DMAC_SRC_STRIDE_20 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_20 +#define CONF_DMAC_DES_STRIDE_20 0 +#endif + +// Channel 21 settings +// dmac_channel_21_settings +#ifndef CONF_DMAC_CHANNEL_21_SETTINGS +#define CONF_DMAC_CHANNEL_21_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_21 +#ifndef CONF_DMAC_BURSTSIZE_21 +#define CONF_DMAC_BURSTSIZE_21 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_21 +#ifndef CONF_DMAC_CHUNKSIZE_21 +#define CONF_DMAC_CHUNKSIZE_21 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_21 +#ifndef CONF_DMAC_BEATSIZE_21 +#define CONF_DMAC_BEATSIZE_21 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_21 +#ifndef CONF_DMAC_SRC_INTERFACE_21 +#define CONF_DMAC_SRC_INTERFACE_21 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_21 +#ifndef CONF_DMAC_DES_INTERFACE_21 +#define CONF_DMAC_DES_INTERFACE_21 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_21 +#ifndef CONF_DMAC_SRCINC_21 +#define CONF_DMAC_SRCINC_21 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_21 +#ifndef CONF_DMAC_DSTINC_21 +#define CONF_DMAC_DSTINC_21 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_21 +#ifndef CONF_DMAC_TRANS_TYPE_21 +#define CONF_DMAC_TRANS_TYPE_21 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_21 +#ifndef CONF_DMAC_TRIGSRC_21 +#define CONF_DMAC_TRIGSRC_21 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_21 == 0 +#define CONF_DMAC_TYPE_21 0 +#define CONF_DMAC_DSYNC_21 0 +#elif CONF_DMAC_TRANS_TYPE_21 == 1 +#define CONF_DMAC_TYPE_21 1 +#define CONF_DMAC_DSYNC_21 0 +#elif CONF_DMAC_TRANS_TYPE_21 == 2 +#define CONF_DMAC_TYPE_21 1 +#define CONF_DMAC_DSYNC_21 1 +#endif + +#if CONF_DMAC_TRIGSRC_21 == 0xFF +#define CONF_DMAC_SWREQ_21 1 +#else +#define CONF_DMAC_SWREQ_21 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_21_SETTINGS == 1 && CONF_DMAC_BEATSIZE_21 != 2 \ + && ((!CONF_DMAC_SRCINC_21) || (!CONF_DMAC_DSTINC_21))) +#if (!CONF_DMAC_SRCINC_21) +#define CONF_DMAC_SRC_STRIDE_21 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_21) +#define CONF_DMAC_DES_STRIDE_21 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_21 +#define CONF_DMAC_SRC_STRIDE_21 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_21 +#define CONF_DMAC_DES_STRIDE_21 0 +#endif + +// Channel 22 settings +// dmac_channel_22_settings +#ifndef CONF_DMAC_CHANNEL_22_SETTINGS +#define CONF_DMAC_CHANNEL_22_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_22 +#ifndef CONF_DMAC_BURSTSIZE_22 +#define CONF_DMAC_BURSTSIZE_22 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_22 +#ifndef CONF_DMAC_CHUNKSIZE_22 +#define CONF_DMAC_CHUNKSIZE_22 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_22 +#ifndef CONF_DMAC_BEATSIZE_22 +#define CONF_DMAC_BEATSIZE_22 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_22 +#ifndef CONF_DMAC_SRC_INTERFACE_22 +#define CONF_DMAC_SRC_INTERFACE_22 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_22 +#ifndef CONF_DMAC_DES_INTERFACE_22 +#define CONF_DMAC_DES_INTERFACE_22 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_22 +#ifndef CONF_DMAC_SRCINC_22 +#define CONF_DMAC_SRCINC_22 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_22 +#ifndef CONF_DMAC_DSTINC_22 +#define CONF_DMAC_DSTINC_22 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_22 +#ifndef CONF_DMAC_TRANS_TYPE_22 +#define CONF_DMAC_TRANS_TYPE_22 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_22 +#ifndef CONF_DMAC_TRIGSRC_22 +#define CONF_DMAC_TRIGSRC_22 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_22 == 0 +#define CONF_DMAC_TYPE_22 0 +#define CONF_DMAC_DSYNC_22 0 +#elif CONF_DMAC_TRANS_TYPE_22 == 1 +#define CONF_DMAC_TYPE_22 1 +#define CONF_DMAC_DSYNC_22 0 +#elif CONF_DMAC_TRANS_TYPE_22 == 2 +#define CONF_DMAC_TYPE_22 1 +#define CONF_DMAC_DSYNC_22 1 +#endif + +#if CONF_DMAC_TRIGSRC_22 == 0xFF +#define CONF_DMAC_SWREQ_22 1 +#else +#define CONF_DMAC_SWREQ_22 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_22_SETTINGS == 1 && CONF_DMAC_BEATSIZE_22 != 2 \ + && ((!CONF_DMAC_SRCINC_22) || (!CONF_DMAC_DSTINC_22))) +#if (!CONF_DMAC_SRCINC_22) +#define CONF_DMAC_SRC_STRIDE_22 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_22) +#define CONF_DMAC_DES_STRIDE_22 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_22 +#define CONF_DMAC_SRC_STRIDE_22 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_22 +#define CONF_DMAC_DES_STRIDE_22 0 +#endif + +// Channel 23 settings +// dmac_channel_23_settings +#ifndef CONF_DMAC_CHANNEL_23_SETTINGS +#define CONF_DMAC_CHANNEL_23_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_23 +#ifndef CONF_DMAC_BURSTSIZE_23 +#define CONF_DMAC_BURSTSIZE_23 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_23 +#ifndef CONF_DMAC_CHUNKSIZE_23 +#define CONF_DMAC_CHUNKSIZE_23 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_23 +#ifndef CONF_DMAC_BEATSIZE_23 +#define CONF_DMAC_BEATSIZE_23 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_23 +#ifndef CONF_DMAC_SRC_INTERFACE_23 +#define CONF_DMAC_SRC_INTERFACE_23 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_23 +#ifndef CONF_DMAC_DES_INTERFACE_23 +#define CONF_DMAC_DES_INTERFACE_23 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_23 +#ifndef CONF_DMAC_SRCINC_23 +#define CONF_DMAC_SRCINC_23 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_23 +#ifndef CONF_DMAC_DSTINC_23 +#define CONF_DMAC_DSTINC_23 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_23 +#ifndef CONF_DMAC_TRANS_TYPE_23 +#define CONF_DMAC_TRANS_TYPE_23 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_23 +#ifndef CONF_DMAC_TRIGSRC_23 +#define CONF_DMAC_TRIGSRC_23 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_23 == 0 +#define CONF_DMAC_TYPE_23 0 +#define CONF_DMAC_DSYNC_23 0 +#elif CONF_DMAC_TRANS_TYPE_23 == 1 +#define CONF_DMAC_TYPE_23 1 +#define CONF_DMAC_DSYNC_23 0 +#elif CONF_DMAC_TRANS_TYPE_23 == 2 +#define CONF_DMAC_TYPE_23 1 +#define CONF_DMAC_DSYNC_23 1 +#endif + +#if CONF_DMAC_TRIGSRC_23 == 0xFF +#define CONF_DMAC_SWREQ_23 1 +#else +#define CONF_DMAC_SWREQ_23 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_23_SETTINGS == 1 && CONF_DMAC_BEATSIZE_23 != 2 \ + && ((!CONF_DMAC_SRCINC_23) || (!CONF_DMAC_DSTINC_23))) +#if (!CONF_DMAC_SRCINC_23) +#define CONF_DMAC_SRC_STRIDE_23 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_23) +#define CONF_DMAC_DES_STRIDE_23 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_23 +#define CONF_DMAC_SRC_STRIDE_23 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_23 +#define CONF_DMAC_DES_STRIDE_23 0 +#endif + +// + +// <<< end of configuration section >>> + +#endif // HPL_XDMAC_CONFIG_H diff --git a/hw/bsp/same7x/boards/same70_qmtech/peripheral_clk_config.h b/hw/bsp/same7x/boards/same70_qmtech/peripheral_clk_config.h new file mode 100644 index 000000000..84756f5ac --- /dev/null +++ b/hw/bsp/same7x/boards/same70_qmtech/peripheral_clk_config.h @@ -0,0 +1,126 @@ +/* Auto-generated config file peripheral_clk_config.h */ +#ifndef PERIPHERAL_CLK_CONFIG_H +#define PERIPHERAL_CLK_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +/** + * \def CONF_HCLK_FREQUENCY + * \brief HCLK's Clock frequency + */ +#ifndef CONF_HCLK_FREQUENCY +#define CONF_HCLK_FREQUENCY 300000000 +#endif + +/** + * \def CONF_FCLK_FREQUENCY + * \brief FCLK's Clock frequency + */ +#ifndef CONF_FCLK_FREQUENCY +#define CONF_FCLK_FREQUENCY 300000000 +#endif + +/** + * \def CONF_CPU_FREQUENCY + * \brief CPU's Clock frequency + */ +#ifndef CONF_CPU_FREQUENCY +#define CONF_CPU_FREQUENCY 300000000 +#endif + +/** + * \def CONF_SLCK_FREQUENCY + * \brief Slow Clock frequency + */ +#define CONF_SLCK_FREQUENCY 0 + +/** + * \def CONF_MCK_FREQUENCY + * \brief Master Clock frequency + */ +#define CONF_MCK_FREQUENCY 150000000 + +/** + * \def CONF_PCK6_FREQUENCY + * \brief Programmable Clock Controller 6 frequency + */ +#define CONF_PCK6_FREQUENCY 1714285 + +// USART Clock Settings +// USART Clock source + +// <0=> Master Clock (MCK) +// <1=> MCK / 8 for USART +// <2=> Programmable Clock Controller 4 (PMC_PCK4) +// <3=> External Clock +// This defines the clock source for the USART +// usart_clock_source +#ifndef CONF_USART1_CK_SRC +#define CONF_USART1_CK_SRC 0 +#endif + +// USART External Clock Input on SCK <1-4294967295> +// Inputs the external clock frequency on SCK +// usart_clock_freq +#ifndef CONF_USART1_SCK_FREQ +#define CONF_USART1_SCK_FREQ 10000000 +#endif + +// + +/** + * \def USART FREQUENCY + * \brief USART's Clock frequency + */ +#ifndef CONF_USART1_FREQUENCY +#define CONF_USART1_FREQUENCY 150000000 +#endif + +#ifndef CONF_SRC_USB_480M +#define CONF_SRC_USB_480M 0 +#endif + +#ifndef CONF_SRC_USB_48M +#define CONF_SRC_USB_48M 1 +#endif + +// USB Full/Low Speed Clock +// USB Clock Controller (USB_48M) +// usb_fsls_clock_source +// 48MHz clock source for low speed and full speed. +// It must be available when low speed is supported by host driver. +// It must be available when low power mode is selected. +#ifndef CONF_USBHS_FSLS_SRC +#define CONF_USBHS_FSLS_SRC CONF_SRC_USB_48M +#endif + +// USB Clock Source(Normal/Low-power Mode Selection) +// USB High Speed Clock (USB_480M) +// USB Clock Controller (USB_48M) +// usb_clock_source +// Select the clock source for USB. +// In normal mode, use "USB High Speed Clock (USB_480M)". +// In low-power mode, use "USB Clock Controller (USB_48M)". +#ifndef CONF_USBHS_SRC +#define CONF_USBHS_SRC CONF_SRC_USB_480M +#endif + +/** + * \def CONF_USBHS_FSLS_FREQUENCY + * \brief USBHS's Full/Low Speed Clock Source frequency + */ +#ifndef CONF_USBHS_FSLS_FREQUENCY +#define CONF_USBHS_FSLS_FREQUENCY 48000000 +#endif + +/** + * \def CONF_USBHS_FREQUENCY + * \brief USBHS's Selected Clock Source frequency + */ +#ifndef CONF_USBHS_FREQUENCY +#define CONF_USBHS_FREQUENCY 480000000 +#endif + +// <<< end of configuration section >>> + +#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/hw/bsp/same7x/boards/same70_xplained/board.cmake b/hw/bsp/same7x/boards/same70_xplained/board.cmake new file mode 100644 index 000000000..b226b6c4f --- /dev/null +++ b/hw/bsp/same7x/boards/same70_xplained/board.cmake @@ -0,0 +1,8 @@ +set(JLINK_DEVICE SAME70Q21B) +set(LD_FILE_GNU ${TOP}/hw/mcu/microchip/same70/same70b/gcc/gcc/same70q21b_flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAME70Q21B__ + ) +endfunction() diff --git a/hw/bsp/same7x/boards/same70_xplained/board.h b/hw/bsp/same7x/boards/same70_xplained/board.h new file mode 100644 index 000000000..85e23deb8 --- /dev/null +++ b/hw/bsp/same7x/boards/same70_xplained/board.h @@ -0,0 +1,64 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to do so, subject to the + * following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: SAME70 Xplained + manufacturer: Microchip + url: https://www.microchip.com/en-us/development-tool/atsame70-xpld +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED_PIN GPIO(GPIO_PORTC, 8) +#define LED_STATE_ON 1 +#define LED_PORT_CLOCK ID_PIOC + +#define BUTTON_PIN GPIO(GPIO_PORTA, 11) +#define BUTTON_STATE_ACTIVE 0 +#define BUTTON_PORT_CLOCK ID_PIOA + +#define UART_TX_PIN GPIO(GPIO_PORTB, 4) +#define UART_TX_FUNCTION MUX_PB4D_USART1_TXD1 +#define UART_RX_PIN GPIO(GPIO_PORTA, 21) +#define UART_RX_FUNCTION MUX_PA21A_USART1_RXD1 +#define UART_PORT_CLOCK ID_USART1 +#define BOARD_USART USART1 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; + (void) state; +} + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/same7x/boards/same70_xplained/board.mk b/hw/bsp/same7x/boards/same70_xplained/board.mk new file mode 100644 index 000000000..ca23a9be5 --- /dev/null +++ b/hw/bsp/same7x/boards/same70_xplained/board.mk @@ -0,0 +1,3 @@ +CFLAGS += -D__SAME70Q21B__ + +JLINK_DEVICE = SAME70Q21B diff --git a/hw/bsp/same7x/boards/same70_xplained/hpl_pmc_config.h b/hw/bsp/same7x/boards/same70_xplained/hpl_pmc_config.h new file mode 100644 index 000000000..387aaa5df --- /dev/null +++ b/hw/bsp/same7x/boards/same70_xplained/hpl_pmc_config.h @@ -0,0 +1,1053 @@ +/* Auto-generated config file hpl_pmc_config.h */ +#ifndef HPL_PMC_CONFIG_H +#define HPL_PMC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include + +#define CLK_SRC_OPTION_OSC32K 0 +#define CLK_SRC_OPTION_XOSC32K 1 +#define CLK_SRC_OPTION_OSC12M 2 +#define CLK_SRC_OPTION_XOSC20M 3 + +#define CLK_SRC_OPTION_SLCK 0 +#define CLK_SRC_OPTION_MAINCK 1 +#define CLK_SRC_OPTION_PLLACK 2 +#define CLK_SRC_OPTION_UPLLCKDIV 3 +#define CLK_SRC_OPTION_MCK 4 + +#define CLK_SRC_OPTION_UPLLCK 3 + +#define CONF_RC_4M 0 +#define CONF_RC_8M 1 +#define CONF_RC_12M 2 + +#define CONF_XOSC32K_NO_BYPASS 0 +#define CONF_XOSC32K_BYPASS 1 + +#define CONF_XOSC20M_NO_BYPASS 0 +#define CONF_XOSC20M_BYPASS 1 + +// Clock_SLCK configuration +// Indicates whether SLCK configuration is enabled or not +// enable_clk_gen_slck +#ifndef CONF_CLK_SLCK_CONFIG +#define CONF_CLK_SLCK_CONFIG 1 +#endif + +// Clock Generator +// clock generator SLCK source + +// 32kHz High Accuracy Internal Oscillator (OSC32K) + +// 32kHz External Crystal Oscillator (XOSC32K) + +// This defines the clock source for SLCK +// clk_gen_slck_oscillator +#ifndef CONF_CLK_GEN_SLCK_SRC +#define CONF_CLK_GEN_SLCK_SRC CLK_SRC_OPTION_OSC32K +#endif + +// Enable Clock_SLCK +// Indicates whether SLCK is enabled or disable +// clk_gen_slck_arch_enable +#ifndef CONF_CLK_SLCK_ENABLE +#define CONF_CLK_SLCK_ENABLE 1 +#endif + +// + +// + +// +// // Clock_MAINCK configuration +// Indicates whether MAINCK configuration is enabled or not +// enable_clk_gen_mainck +#ifndef CONF_CLK_MAINCK_CONFIG +#define CONF_CLK_MAINCK_CONFIG 1 +#endif + +// Clock Generator +// clock generator MAINCK source + +// Embedded 4/8/12MHz RC Oscillator (OSC12M) + +// External 3-20MHz Oscillator (XOSC20M) + +// This defines the clock source for MAINCK +// clk_gen_mainck_oscillator +#ifndef CONF_CLK_GEN_MAINCK_SRC +#define CONF_CLK_GEN_MAINCK_SRC CLK_SRC_OPTION_XOSC20M +#endif + +// Enable Clock_MAINCK +// Indicates whether MAINCK is enabled or disable +// clk_gen_mainck_arch_enable +#ifndef CONF_CLK_MAINCK_ENABLE +#define CONF_CLK_MAINCK_ENABLE 1 +#endif + +// Enable Main Clock Failure Detection +// Indicates whether Main Clock Failure Detection is enabled or disable. +// The 4/8/12 MHz RC oscillator must be selected as the source of MAINCK. +// clk_gen_cfden_enable +#ifndef CONF_CLK_CFDEN_ENABLE +#define CONF_CLK_CFDEN_ENABLE 0 +#endif + +// + +// + +// +// // Clock_MCKR configuration +// Indicates whether MCKR configuration is enabled or not +// enable_clk_gen_mckr +#ifndef CONF_CLK_MCKR_CONFIG +#define CONF_CLK_MCKR_CONFIG 1 +#endif + +// Clock Generator +// clock generator MCKR source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// PLLA Clock (PLLACK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// This defines the clock source for MCKR +// clk_gen_mckr_oscillator +#ifndef CONF_CLK_GEN_MCKR_SRC +#define CONF_CLK_GEN_MCKR_SRC CLK_SRC_OPTION_PLLACK +#endif + +// Enable Clock_MCKR +// Indicates whether MCKR is enabled or disable +// clk_gen_mckr_arch_enable +#ifndef CONF_CLK_MCKR_ENABLE +#define CONF_CLK_MCKR_ENABLE 1 +#endif + +// + +// + +// Master Clock Prescaler +// <0=> 1 +// <1=> 2 +// <2=> 4 +// <3=> 8 +// <4=> 16 +// <5=> 32 +// <6=> 64 +// <7=> 3 +// Select the clock prescaler. +// mckr_presc +#ifndef CONF_MCKR_PRESC +#define CONF_MCKR_PRESC 0 +#endif + +// +// // Clock_MCK configuration +// Indicates whether MCK configuration is enabled or not +// enable_clk_gen_mck +#ifndef CONF_CLK_MCK_CONFIG +#define CONF_CLK_MCK_CONFIG 1 +#endif + +// Clock Generator +// clock generator MCK source + +// Master Clock Controller (PMC_MCKR) + +// This defines the clock source for MCK +// clk_gen_mck_oscillator +#ifndef CONF_CLK_GEN_MCK_SRC +#define CONF_CLK_GEN_MCK_SRC CLK_SRC_OPTION_MCKR +#endif + +// + +// + +// Master Clock Controller Divider MCK divider +// <0=> 1 +// <1=> 2 +// <3=> 3 +// <2=> 4 +// Select the master clock divider. +// mck_div +#ifndef CONF_MCK_DIV +#define CONF_MCK_DIV 1 +#endif + +// +// // Clock_SYSTICK configuration +// Indicates whether SYSTICK configuration is enabled or not +// enable_clk_gen_systick +#ifndef CONF_CLK_SYSTICK_CONFIG +#define CONF_CLK_SYSTICK_CONFIG 1 +#endif + +// Clock Generator +// clock generator SYSTICK source + +// Master Clock Controller (PMC_MCKR) + +// This defines the clock source for SYSTICK +// clk_gen_systick_oscillator +#ifndef CONF_CLK_GEN_SYSTICK_SRC +#define CONF_CLK_GEN_SYSTICK_SRC CLK_SRC_OPTION_MCKR +#endif + +// + +// + +// Systick clock divider +// <8=> 8 +// Select systick clock divider +// systick_clock_div +#ifndef CONF_SYSTICK_DIV +#define CONF_SYSTICK_DIV 8 +#endif + +// +// // Clock_FCLK configuration +// Indicates whether FCLK configuration is enabled or not +// enable_clk_gen_fclk +#ifndef CONF_CLK_FCLK_CONFIG +#define CONF_CLK_FCLK_CONFIG 1 +#endif + +// Clock Generator +// clock generator FCLK source + +// Master Clock Controller (PMC_MCKR) + +// This defines the clock source for FCLK +// clk_gen_fclk_oscillator +#ifndef CONF_CLK_GEN_FCLK_SRC +#define CONF_CLK_GEN_FCLK_SRC CLK_SRC_OPTION_MCKR +#endif + +// + +// + +// +// // Clock_GCLK0 configuration +// Indicates whether GCLK0 configuration is enabled or not +// enable_clk_gen_gclk0 +#ifndef CONF_CLK_GCLK0_CONFIG +#define CONF_CLK_GCLK0_CONFIG 1 +#endif + +// Clock Generator +// clock generator GCLK0 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// USB 480M Clock (UPLLCK) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for GCLK0 +// clk_gen_gclk0_oscillator +#ifndef CONF_CLK_GEN_GCLK0_SRC +#define CONF_CLK_GEN_GCLK0_SRC CLK_SRC_OPTION_MCK +#endif + +// Enable Clock_GCLK0 +// Indicates whether GCLK0 is enabled or disable +// clk_gen_gclk0_arch_enable +#ifndef CONF_CLK_GCLK0_ENABLE +#define CONF_CLK_GCLK0_ENABLE 1 +#endif + +// + +// +// Enable GCLK0 GCLKEN +// Indicates whether GCLK0 GCLKEN is enabled or disable +// gclk0_gclken_enable +#ifndef CONF_GCLK0_GCLKEN_ENABLE +#define CONF_GCLK0_GCLKEN_ENABLE 0 +#endif + +// Generic Clock GCLK0 divider <1-256> +// Select the clock divider (divider = GCLKDIV + 1). +// gclk0_div +#ifndef CONF_GCLK0_DIV +#define CONF_GCLK0_DIV 2 +#endif + +// +// // Clock_GCLK1 configuration +// Indicates whether GCLK1 configuration is enabled or not +// enable_clk_gen_gclk1 +#ifndef CONF_CLK_GCLK1_CONFIG +#define CONF_CLK_GCLK1_CONFIG 1 +#endif + +// Clock Generator +// clock generator GCLK1 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// USB 480M Clock (UPLLCK) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for GCLK1 +// clk_gen_gclk1_oscillator +#ifndef CONF_CLK_GEN_GCLK1_SRC +#define CONF_CLK_GEN_GCLK1_SRC CLK_SRC_OPTION_PLLACK +#endif + +// Enable Clock_GCLK1 +// Indicates whether GCLK1 is enabled or disable +// clk_gen_gclk1_arch_enable +#ifndef CONF_CLK_GCLK1_ENABLE +#define CONF_CLK_GCLK1_ENABLE 1 +#endif + +// + +// +// Enable GCLK1 GCLKEN +// Indicates whether GCLK1 GCLKEN is enabled or disable +// gclk1_gclken_enable +#ifndef CONF_GCLK1_GCLKEN_ENABLE +#define CONF_GCLK1_GCLKEN_ENABLE 0 +#endif + +// Generic Clock GCLK1 divider <1-256> +// Select the clock divider (divider = GCLKDIV + 1). +// gclk1_div +#ifndef CONF_GCLK1_DIV +#define CONF_GCLK1_DIV 3 +#endif + +// +// // Clock_PCK0 configuration +// Indicates whether PCK0 configuration is enabled or not +// enable_clk_gen_pck0 +#ifndef CONF_CLK_PCK0_CONFIG +#define CONF_CLK_PCK0_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK0 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK0 +// clk_gen_pck0_oscillator +#ifndef CONF_CLK_GEN_PCK0_SRC +#define CONF_CLK_GEN_PCK0_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK0 +// Indicates whether PCK0 is enabled or disable +// clk_gen_pck0_arch_enable +#ifndef CONF_CLK_PCK0_ENABLE +#define CONF_CLK_PCK0_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck0_presc +#ifndef CONF_PCK0_PRESC +#define CONF_PCK0_PRESC 1 +#endif + +// +// // Clock_PCK1 configuration +// Indicates whether PCK1 configuration is enabled or not +// enable_clk_gen_pck1 +#ifndef CONF_CLK_PCK1_CONFIG +#define CONF_CLK_PCK1_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK1 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK1 +// clk_gen_pck1_oscillator +#ifndef CONF_CLK_GEN_PCK1_SRC +#define CONF_CLK_GEN_PCK1_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK1 +// Indicates whether PCK1 is enabled or disable +// clk_gen_pck1_arch_enable +#ifndef CONF_CLK_PCK1_ENABLE +#define CONF_CLK_PCK1_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck1_presc +#ifndef CONF_PCK1_PRESC +#define CONF_PCK1_PRESC 2 +#endif + +// +// // Clock_PCK2 configuration +// Indicates whether PCK2 configuration is enabled or not +// enable_clk_gen_pck2 +#ifndef CONF_CLK_PCK2_CONFIG +#define CONF_CLK_PCK2_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK2 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK2 +// clk_gen_pck2_oscillator +#ifndef CONF_CLK_GEN_PCK2_SRC +#define CONF_CLK_GEN_PCK2_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK2 +// Indicates whether PCK2 is enabled or disable +// clk_gen_pck2_arch_enable +#ifndef CONF_CLK_PCK2_ENABLE +#define CONF_CLK_PCK2_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck2_presc +#ifndef CONF_PCK2_PRESC +#define CONF_PCK2_PRESC 3 +#endif + +// +// // Clock_PCK3 configuration +// Indicates whether PCK3 configuration is enabled or not +// enable_clk_gen_pck3 +#ifndef CONF_CLK_PCK3_CONFIG +#define CONF_CLK_PCK3_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK3 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK3 +// clk_gen_pck3_oscillator +#ifndef CONF_CLK_GEN_PCK3_SRC +#define CONF_CLK_GEN_PCK3_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK3 +// Indicates whether PCK3 is enabled or disable +// clk_gen_pck3_arch_enable +#ifndef CONF_CLK_PCK3_ENABLE +#define CONF_CLK_PCK3_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck3_presc +#ifndef CONF_PCK3_PRESC +#define CONF_PCK3_PRESC 4 +#endif + +// +// // Clock_PCK4 configuration +// Indicates whether PCK4 configuration is enabled or not +// enable_clk_gen_pck4 +#ifndef CONF_CLK_PCK4_CONFIG +#define CONF_CLK_PCK4_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK4 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK4 +// clk_gen_pck4_oscillator +#ifndef CONF_CLK_GEN_PCK4_SRC +#define CONF_CLK_GEN_PCK4_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK4 +// Indicates whether PCK4 is enabled or disable +// clk_gen_pck4_arch_enable +#ifndef CONF_CLK_PCK4_ENABLE +#define CONF_CLK_PCK4_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck4_presc +#ifndef CONF_PCK4_PRESC +#define CONF_PCK4_PRESC 5 +#endif + +// +// // Clock_PCK5 configuration +// Indicates whether PCK5 configuration is enabled or not +// enable_clk_gen_pck5 +#ifndef CONF_CLK_PCK5_CONFIG +#define CONF_CLK_PCK5_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK5 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK5 +// clk_gen_pck5_oscillator +#ifndef CONF_CLK_GEN_PCK5_SRC +#define CONF_CLK_GEN_PCK5_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK5 +// Indicates whether PCK5 is enabled or disable +// clk_gen_pck5_arch_enable +#ifndef CONF_CLK_PCK5_ENABLE +#define CONF_CLK_PCK5_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck5_presc +#ifndef CONF_PCK5_PRESC +#define CONF_PCK5_PRESC 6 +#endif + +// +// // Clock_PCK6 configuration +// Indicates whether PCK6 configuration is enabled or not +// enable_clk_gen_pck6 +#ifndef CONF_CLK_PCK6_CONFIG +#define CONF_CLK_PCK6_CONFIG 1 +#endif + +// Clock Generator +// clock generator PCK6 source + +// Slow Clock (SLCK) + +// Main Clock (MAINCK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// PLLA Clock (PLLACK) + +// Master Clock (MCK) + +// This defines the clock source for PCK6 +// clk_gen_pck6_oscillator +#ifndef CONF_CLK_GEN_PCK6_SRC +#define CONF_CLK_GEN_PCK6_SRC CLK_SRC_OPTION_MAINCK +#endif + +// Enable Clock_PCK6 +// Indicates whether PCK6 is enabled or disable +// clk_gen_pck6_arch_enable +#ifndef CONF_CLK_PCK6_ENABLE +#define CONF_CLK_PCK6_ENABLE 0 +#endif + +// + +// + +// Programmable Clock Controller Prescaler <1-256> +// Select the clock prescaler (prescaler = PRESC + 1). +// pck6_presc +#ifndef CONF_PCK6_PRESC +#define CONF_PCK6_PRESC 7 +#endif + +// +// // Clock_USB_480M configuration +// Indicates whether USB_480M configuration is enabled or not +// enable_clk_gen_usb_480m +#ifndef CONF_CLK_USB_480M_CONFIG +#define CONF_CLK_USB_480M_CONFIG 1 +#endif + +// Clock Generator +// clock generator USB_480M source + +// USB 480M Clock (UPLLCK) + +// This defines the clock source for USB_480M +// clk_gen_usb_480m_oscillator +#ifndef CONF_CLK_GEN_USB_480M_SRC +#define CONF_CLK_GEN_USB_480M_SRC CLK_SRC_OPTION_UPLLCK +#endif + +// + +// + +// +// // Clock_USB_48M configuration +// Indicates whether USB_48M configuration is enabled or not +// enable_clk_gen_usb_48m +#ifndef CONF_CLK_USB_48M_CONFIG +#define CONF_CLK_USB_48M_CONFIG 1 +#endif + +// Clock Generator +// clock generator USB_48M source + +// PLLA Clock (PLLACK) + +// UDPLL with Divider (MCKR UPLLDIV2) + +// This defines the clock source for USB_48M +// clk_gen_usb_48m_oscillator +#ifndef CONF_CLK_GEN_USB_48M_SRC +#define CONF_CLK_GEN_USB_48M_SRC CLK_SRC_OPTION_UPLLCKDIV +#endif + +// Enable Clock_USB_48M +// Indicates whether USB_48M is enabled or disable +// clk_gen_usb_48m_arch_enable +#ifndef CONF_CLK_USB_48M_ENABLE +#define CONF_CLK_USB_48M_ENABLE 1 +#endif + +// + +// + +// USB Clock Controller Divider <1-16> +// Select the USB clock divider (divider = USBDIV + 1). +// usb_48m_div +#ifndef CONF_USB_48M_DIV +#define CONF_USB_48M_DIV 5 +#endif + +// +// // Clock_SLCK2 configuration +// Indicates whether SLCK2 configuration is enabled or not +// enable_clk_gen_slck2 +#ifndef CONF_CLK_SLCK2_CONFIG +#define CONF_CLK_SLCK2_CONFIG 1 +#endif + +// Clock Generator +// clock generator SLCK2 source + +// Slow Clock (SLCK) + +// This defines the clock source for SLCK2 +// clk_gen_slck2_oscillator +#ifndef CONF_CLK_GEN_SLCK2_SRC +#define CONF_CLK_GEN_SLCK2_SRC CLK_SRC_OPTION_SLCK +#endif + +// + +// + +// +// + +// System Configuration +// Indicates whether configuration for system is enabled or not +// enable_hclk_clock +#ifndef CONF_SYSTEM_CONFIG +#define CONF_SYSTEM_CONFIG 1 +#endif + +// Processor Clock Settings +// Processor Clock source +// Master Clock Controller (PMC_MCKR) +// This defines the clock source for the HCLK (Processor clock) +// hclk_clock_source +#ifndef CONF_HCLK_SRC +#define CONF_HCLK_SRC MCKR +#endif + +// Flash Wait State +// <0=> 1 cycle +// <1=> 2 cycles +// <2=> 3 cycles +// <3=> 4 cycles +// <4=> 5 cycles +// <5=> 6 cycles +// <6=> 7 cycles +// This field defines the number of wait states for read and write operations. +// efc_fws +#ifndef CONF_EFC_WAIT_STATE +#define CONF_EFC_WAIT_STATE 5 +#endif + +// +// + +// SysTick Clock +// enable_systick_clk_clock +#ifndef CONF_SYSTICK_CLK_CONFIG +#define CONF_SYSTICK_CLK_CONFIG 1 +#endif + +// SysTick Clock source +// Master Clock Controller (PMC_MCKR) +// This defines the clock source for the SysTick Clock +// systick_clk_clock_source +#ifndef CONF_SYSTICK_CLK_SRC +#define CONF_SYSTICK_CLK_SRC MCKR +#endif + +// SysTick Clock Divider +// <8=> 8 +// Fixed to 8 if Systick is not using Processor clock +// systick_clk_clock_div +#ifndef CONF_SYSTICK_CLK_DIV +#define CONF_SYSTICK_CLK_DIV 8 +#endif + +// + +// OSC32K Oscillator Configuration +// Indicates whether configuration for OSC32K is enabled or not +// enable_osc32k +#ifndef CONF_OSC32K_CONFIG +#define CONF_OSC32K_CONFIG 1 +#endif + +// OSC32K Oscillator Control +// OSC32K Oscillator Enable +// Indicates whether OSC32K Oscillator is enabled or not +// osc32k_arch_enable +#ifndef CONF_OSC32K_ENABLE +#define CONF_OSC32K_ENABLE 0 +#endif +// +// + +// XOSC32K Oscillator Configuration +// Indicates whether configuration for XOSC32K is enabled or not +// enable_xosc32k +#ifndef CONF_XOSC32K_CONFIG +#define CONF_XOSC32K_CONFIG 0 +#endif + +// XOSC32K Oscillator Control +// Oscillator Bypass Select +// The 32kHz crystal oscillator is not bypassed. +// The 32kHz crystal oscillator is bypassed. +// Indicates whether XOSC32K is bypassed. +// xosc32k_bypass +#ifndef CONF_XOSC32K +#define CONF_XOSC32K CONF_XOSC32K_NO_BYPASS +#endif + +// XOSC32K Oscillator Enable +// Indicates whether XOSC32K Oscillator is enabled or not +// xosc32k_arch_enable +#ifndef CONF_XOSC32K_ENABLE +#define CONF_XOSC32K_ENABLE 0 +#endif +// +// + +// OSC12M Oscillator Configuration +// Indicates whether configuration for OSC12M is enabled or not +// enable_osc12m +#ifndef CONF_OSC12M_CONFIG +#define CONF_OSC12M_CONFIG 0 +#endif + +// OSC12M Oscillator Control +// OSC12M Oscillator Enable +// Indicates whether OSC12M Oscillator is enabled or not. +// osc12m_arch_enable +#ifndef CONF_OSC12M_ENABLE +#define CONF_OSC12M_ENABLE 0 +#endif + +// OSC12M selector +// <0=> 4000000 +// <1=> 8000000 +// <2=> 12000000 +// Select the frequency of embedded fast RC oscillator. +// osc12m_selector +#ifndef CONF_OSC12M_SELECTOR +#define CONF_OSC12M_SELECTOR 2 +#endif +// +// + +// XOSC20M Oscillator Configuration +// Indicates whether configuration for XOSC20M is enabled or not. +// enable_xosc20m +#ifndef CONF_XOSC20M_CONFIG +#define CONF_XOSC20M_CONFIG 1 +#endif + +// XOSC20M Oscillator Control +// XOSC20M selector <3000000-20000000> +// Select the frequency of crystal or ceramic resonator oscillator. +// xosc20m_selector +#ifndef CONF_XOSC20M_SELECTOR +#define CONF_XOSC20M_SELECTOR 12000000 +#endif + +// Start up time for the external oscillator (ms): <0-256> +// Select start-up time. +// xosc20m_startup_time +#ifndef CONF_XOSC20M_STARTUP_TIME +#define CONF_XOSC20M_STARTUP_TIME 62 +#endif + +// Oscillator Bypass Select +// The external crystal oscillator is not bypassed. +// The external crystal oscillator is bypassed. +// Indicates whether XOSC20M is bypassed. +// xosc20m_bypass +#ifndef CONF_XOSC20M +#define CONF_XOSC20M CONF_XOSC20M_NO_BYPASS +#endif + +// XOSC20M Oscillator Enable +// Indicates whether XOSC20M Oscillator is enabled or not +// xosc20m_arch_enable +#ifndef CONF_XOSC20M_ENABLE +#define CONF_XOSC20M_ENABLE 1 +#endif +// +// + +// PLLACK Oscillator Configuration +// Indicates whether configuration for PLLACK is enabled or not +// enable_pllack +#ifndef CONF_PLLACK_CONFIG +#define CONF_PLLACK_CONFIG 1 +#endif + +// PLLACK Reference Clock Source +// Main Clock (MAINCK) +// Select the clock source. +// pllack_ref_clock +#ifndef CONF_PLLACK_CLK +#define CONF_PLLACK_CLK MAINCK +#endif + +// PLLACK Oscillator Control +// PLLACK Oscillator Enable +// Indicates whether PLLACK Oscillator is enabled or not +// pllack_arch_enable +#ifndef CONF_PLLACK_ENABLE +#define CONF_PLLACK_ENABLE 1 +#endif + +// PLLA Frontend Divider (DIVA) <1-255> +// Select the clock divider +// pllack_div +#ifndef CONF_PLLACK_DIV +#define CONF_PLLACK_DIV 1 +#endif + +// PLLACK Muliplier <1-62> +// Indicates PLLA multiplier (multiplier = MULA + 1). +// pllack_mul +#ifndef CONF_PLLACK_MUL +#define CONF_PLLACK_MUL 25 +#endif +// +// + +// UPLLCK Oscillator Configuration +// Indicates whether configuration for UPLLCK is enabled or not +// enable_upllck +#ifndef CONF_UPLLCK_CONFIG +#define CONF_UPLLCK_CONFIG 1 +#endif + +// UPLLCK Reference Clock Source +// External 3-20MHz Oscillator (XOSC20M) +// Select the clock source,only when the input frequency is 12M or 16M, the upllck output is 480M. +// upllck_ref_clock +#ifndef CONF_UPLLCK_CLK +#define CONF_UPLLCK_CLK XOSC20M +#endif + +// UPLLCK Oscillator Control +// UPLLCK Oscillator Enable +// Indicates whether UPLLCK Oscillator is enabled or not +// upllck_arch_enable +#ifndef CONF_UPLLCK_ENABLE +#define CONF_UPLLCK_ENABLE 1 +#endif +// +// + +// UPLLCKDIV Oscillator Configuration +// Indicates whether configuration for UPLLCKDIV is enabled or not +// enable_upllckdiv +#ifndef CONF_UPLLCKDIV_CONFIG +#define CONF_UPLLCKDIV_CONFIG 1 +#endif + +// UPLLCKDIV Reference Clock Source +// USB 480M Clock (UPLLCK) +// Select the clock source. +// upllckdiv_ref_clock +#ifndef CONF_UPLLCKDIV_CLK +#define CONF_UPLLCKDIV_CLK UPLLCK +#endif + +// UPLLCKDIV Oscillator Control +// UPLLCKDIV Clock Divider +// <0=> 1 +// <1=> 2 +// Select the clock divider. +// upllckdiv_div +#ifndef CONF_UPLLCKDIV_DIV +#define CONF_UPLLCKDIV_DIV 1 +#endif +// +// + +// MCK/8 +// enable_mck_div_8 +#ifndef CONF_MCK_DIV_8_CONFIG +#define CONF_MCK_DIV_8_CONFIG 0 +#endif + +// MCK/8 Source +// <0=> Master Clock (MCK) +// mck_div_8_src +#ifndef CONF_MCK_DIV_8_SRC +#define CONF_MCK_DIV_8_SRC 0 +#endif +// + +// External Clock Input Configuration +// enable_dummy_ext +#ifndef CONF_DUMMY_EXT_CONFIG +#define CONF_DUMMY_EXT_CONFIG 1 +#endif + +// External Clock Input Source +// All here are dummy values +// Refer to the peripherals settings for actual input information +// <0=> Specific clock input from specific pin +// dummy_ext_src +#ifndef CONF_DUMMY_EXT_SRC +#define CONF_DUMMY_EXT_SRC 0 +#endif +// + +// External Clock Configuration +// enable_dummy_ext_clk +#ifndef CONF_DUMMY_EXT_CLK_CONFIG +#define CONF_DUMMY_EXT_CLK_CONFIG 1 +#endif + +// External Clock Source +// All here are dummy values +// Refer to the peripherals settings for actual input information +// <0=> External Clock Input +// dummy_ext_clk_src +#ifndef CONF_DUMMY_EXT_CLK_SRC +#define CONF_DUMMY_EXT_CLK_SRC 0 +#endif +// + +// <<< end of configuration section >>> + +#endif // HPL_PMC_CONFIG_H diff --git a/hw/bsp/same7x/boards/same70_xplained/hpl_usart_config.h b/hw/bsp/same7x/boards/same70_xplained/hpl_usart_config.h new file mode 100644 index 000000000..50ca3f15c --- /dev/null +++ b/hw/bsp/same7x/boards/same70_xplained/hpl_usart_config.h @@ -0,0 +1,215 @@ +/* Auto-generated config file hpl_usart_config.h */ +#ifndef HPL_USART_CONFIG_H +#define HPL_USART_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include + +#ifndef CONF_USART_1_ENABLE +#define CONF_USART_1_ENABLE 1 +#endif + +// Basic Configuration + +// Frame parity +// <0x0=>Even parity +// <0x1=>Odd parity +// <0x2=>Parity forced to 0 +// <0x3=>Parity forced to 1 +// <0x4=>No parity +// Parity bit mode for USART frame +// usart_parity +#ifndef CONF_USART_1_PARITY +#define CONF_USART_1_PARITY 0x4 +#endif + +// Character Size +// <0x0=>5 bits +// <0x1=>6 bits +// <0x2=>7 bits +// <0x3=>8 bits +// Data character size in USART frame +// usart_character_size +#ifndef CONF_USART_1_CHSIZE +#define CONF_USART_1_CHSIZE 0x3 +#endif + +// Stop Bit +// <0=>1 stop bit +// <1=>1.5 stop bits +// <2=>2 stop bits +// Number of stop bits in USART frame +// usart_stop_bit +#ifndef CONF_USART_1_SBMODE +#define CONF_USART_1_SBMODE 0 +#endif + +// Clock Output Select +// <0=>The USART does not drive the SCK pin +// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK +// Clock Output Select in USART sck, if in usrt master mode, please drive SCK. +// usart_clock_output_select +#ifndef CONF_USART_1_CLKO +#define CONF_USART_1_CLKO 0 +#endif + +// Baud rate <1-3000000> +// USART baud rate setting +// usart_baud_rate +#ifndef CONF_USART_1_BAUD +#define CONF_USART_1_BAUD 9600 +#endif + +// + +// Advanced configuration +// usart_advanced +#ifndef CONF_USART_1_ADVANCED_CONFIG +#define CONF_USART_1_ADVANCED_CONFIG 0 +#endif + +// Channel Mode +// <0=>Normal Mode +// <1=>Automatic Echo +// <2=>Local Loopback +// <3=>Remote Loopback +// Channel mode in USART frame +// usart_channel_mode +#ifndef CONF_USART_1_CHMODE +#define CONF_USART_1_CHMODE 0 +#endif + +// 9 bits character enable +// Enable 9 bits character, this has high priority than 5/6/7/8 bits. +// usart_9bits_enable +#ifndef CONF_USART_1_MODE9 +#define CONF_USART_1_MODE9 0 +#endif + +// Variable Sync +// <0=>User defined configuration +// <1=>sync field is updated when a character is written into US_THR +// Variable Synchronization of Command/Data Sync Start Frarm Delimiter +// variable_sync +#ifndef CONF_USART_1_VAR_SYNC +#define CONF_USART_1_VAR_SYNC 0 +#endif + +// Oversampling Mode +// <0=>16 Oversampling +// <1=>8 Oversampling +// Oversampling Mode in UART mode +// usart__oversampling_mode +#ifndef CONF_USART_1_OVER +#define CONF_USART_1_OVER 0 +#endif + +// Inhibit Non Ack +// <0=>The NACK is generated +// <1=>The NACK is not generated +// Inhibit Non Acknowledge +// usart__inack +#ifndef CONF_USART_1_INACK +#define CONF_USART_1_INACK 1 +#endif + +// Disable Successive NACK +// <0=>NACK is sent on the ISO line as soon as a parity error occurs +// <1=>Many parity errors generate a NACK on the ISO line +// Disable Successive NACK +// usart_dsnack +#ifndef CONF_USART_1_DSNACK +#define CONF_USART_1_DSNACK 0 +#endif + +// Inverted Data +// <0=>Data isn't inverted, nomal mode +// <1=>Data is inverted +// Inverted Data +// usart_invdata +#ifndef CONF_USART_1_INVDATA +#define CONF_USART_1_INVDATA 0 +#endif + +// Maximum Number of Automatic Iteration <0-7> +// Defines the maximum number of iterations in mode ISO7816, protocol T = 0. +// usart_max_iteration +#ifndef CONF_USART_1_MAX_ITERATION +#define CONF_USART_1_MAX_ITERATION 0 +#endif + +// Receive Line Filter enable +// whether the USART filters the receive line using a three-sample filter +// usart_receive_filter_enable +#ifndef CONF_USART_1_FILTER +#define CONF_USART_1_FILTER 0 +#endif + +// Manchester Encoder/Decoder Enable +// whether the USART Manchester Encoder/Decoder +// usart_manchester_filter_enable +#ifndef CONF_USART_1_MAN +#define CONF_USART_1_MAN 0 +#endif + +// Manchester Synchronization Mode +// <0=>The Manchester start bit is a 0 to 1 transition +// <1=>The Manchester start bit is a 1 to 0 transition +// Manchester Synchronization Mode +// usart_manchester_synchronization_mode +#ifndef CONF_USART_1_MODSYNC +#define CONF_USART_1_MODSYNC 0 +#endif + +// Start Frame Delimiter Selector +// <0=>Start frame delimiter is COMMAND or DATA SYNC +// <1=>Start frame delimiter is one bit +// Start Frame Delimiter Selector +// usart_start_frame_delimiter +#ifndef CONF_USART_1_ONEBIT +#define CONF_USART_1_ONEBIT 0 +#endif + +// Fractional Part <0-7> +// Fractional part of the baud rate if baud rate generator is in fractional mode +// usart_arch_fractional +#ifndef CONF_USART_1_FRACTIONAL +#define CONF_USART_1_FRACTIONAL 0x0 +#endif + +// Data Order +// <0=>LSB is transmitted first +// <1=>MSB is transmitted first +// Data order of the data bits in the frame +// usart_arch_msbf +#ifndef CONF_USART_1_MSBF +#define CONF_USART_1_MSBF 0 +#endif + +// + +#define CONF_USART_1_MODE 0x0 + +// Calculate BAUD register value in UART mode +#if CONF_USART1_CK_SRC < 3 +#ifndef CONF_USART_1_BAUD_CD +#define CONF_USART_1_BAUD_CD ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / 8 / (2 - CONF_USART_1_OVER)) +#endif +#ifndef CONF_USART_1_BAUD_FP +#define CONF_USART_1_BAUD_FP \ + ((CONF_USART1_FREQUENCY) / CONF_USART_1_BAUD / (2 - CONF_USART_1_OVER) - 8 * CONF_USART_1_BAUD_CD) +#endif +#elif CONF_USART1_CK_SRC == 3 +// No division is active. The value written in US_BRGR has no effect. +#ifndef CONF_USART_1_BAUD_CD +#define CONF_USART_1_BAUD_CD 1 +#endif +#ifndef CONF_USART_1_BAUD_FP +#define CONF_USART_1_BAUD_FP 1 +#endif +#endif + +// <<< end of configuration section >>> + +#endif // HPL_USART_CONFIG_H diff --git a/hw/bsp/same7x/boards/same70_xplained/hpl_xdmac_config.h b/hw/bsp/same7x/boards/same70_xplained/hpl_xdmac_config.h new file mode 100644 index 000000000..a3d62c6fc --- /dev/null +++ b/hw/bsp/same7x/boards/same70_xplained/hpl_xdmac_config.h @@ -0,0 +1,4400 @@ +/* Auto-generated config file hpl_xdmac_config.h */ +#ifndef HPL_XDMAC_CONFIG_H +#define HPL_XDMAC_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +// XDMAC enable +// Indicates whether xdmac is enabled or not +// xdmac_enable +#ifndef CONF_DMA_ENABLE +#define CONF_DMA_ENABLE 0 +#endif + +// Channel 0 settings +// dmac_channel_0_settings +#ifndef CONF_DMAC_CHANNEL_0_SETTINGS +#define CONF_DMAC_CHANNEL_0_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_0 +#ifndef CONF_DMAC_BURSTSIZE_0 +#define CONF_DMAC_BURSTSIZE_0 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_0 +#ifndef CONF_DMAC_CHUNKSIZE_0 +#define CONF_DMAC_CHUNKSIZE_0 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_0 +#ifndef CONF_DMAC_BEATSIZE_0 +#define CONF_DMAC_BEATSIZE_0 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_0 +#ifndef CONF_DMAC_SRC_INTERFACE_0 +#define CONF_DMAC_SRC_INTERFACE_0 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_0 +#ifndef CONF_DMAC_DES_INTERFACE_0 +#define CONF_DMAC_DES_INTERFACE_0 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_0 +#ifndef CONF_DMAC_SRCINC_0 +#define CONF_DMAC_SRCINC_0 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_0 +#ifndef CONF_DMAC_DSTINC_0 +#define CONF_DMAC_DSTINC_0 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_0 +#ifndef CONF_DMAC_TRANS_TYPE_0 +#define CONF_DMAC_TRANS_TYPE_0 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_0 +#ifndef CONF_DMAC_TRIGSRC_0 +#define CONF_DMAC_TRIGSRC_0 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_0 == 0 +#define CONF_DMAC_TYPE_0 0 +#define CONF_DMAC_DSYNC_0 0 +#elif CONF_DMAC_TRANS_TYPE_0 == 1 +#define CONF_DMAC_TYPE_0 1 +#define CONF_DMAC_DSYNC_0 0 +#elif CONF_DMAC_TRANS_TYPE_0 == 2 +#define CONF_DMAC_TYPE_0 1 +#define CONF_DMAC_DSYNC_0 1 +#endif + +#if CONF_DMAC_TRIGSRC_0 == 0xFF +#define CONF_DMAC_SWREQ_0 1 +#else +#define CONF_DMAC_SWREQ_0 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_0_SETTINGS == 1 && CONF_DMAC_BEATSIZE_0 != 2 && ((!CONF_DMAC_SRCINC_0) || (!CONF_DMAC_DSTINC_0))) +#if (!CONF_DMAC_SRCINC_0) +#define CONF_DMAC_SRC_STRIDE_0 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_0) +#define CONF_DMAC_DES_STRIDE_0 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_0 +#define CONF_DMAC_SRC_STRIDE_0 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_0 +#define CONF_DMAC_DES_STRIDE_0 0 +#endif + +// Channel 1 settings +// dmac_channel_1_settings +#ifndef CONF_DMAC_CHANNEL_1_SETTINGS +#define CONF_DMAC_CHANNEL_1_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_1 +#ifndef CONF_DMAC_BURSTSIZE_1 +#define CONF_DMAC_BURSTSIZE_1 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_1 +#ifndef CONF_DMAC_CHUNKSIZE_1 +#define CONF_DMAC_CHUNKSIZE_1 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_1 +#ifndef CONF_DMAC_BEATSIZE_1 +#define CONF_DMAC_BEATSIZE_1 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_1 +#ifndef CONF_DMAC_SRC_INTERFACE_1 +#define CONF_DMAC_SRC_INTERFACE_1 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_1 +#ifndef CONF_DMAC_DES_INTERFACE_1 +#define CONF_DMAC_DES_INTERFACE_1 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_1 +#ifndef CONF_DMAC_SRCINC_1 +#define CONF_DMAC_SRCINC_1 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_1 +#ifndef CONF_DMAC_DSTINC_1 +#define CONF_DMAC_DSTINC_1 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_1 +#ifndef CONF_DMAC_TRANS_TYPE_1 +#define CONF_DMAC_TRANS_TYPE_1 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_1 +#ifndef CONF_DMAC_TRIGSRC_1 +#define CONF_DMAC_TRIGSRC_1 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_1 == 0 +#define CONF_DMAC_TYPE_1 0 +#define CONF_DMAC_DSYNC_1 0 +#elif CONF_DMAC_TRANS_TYPE_1 == 1 +#define CONF_DMAC_TYPE_1 1 +#define CONF_DMAC_DSYNC_1 0 +#elif CONF_DMAC_TRANS_TYPE_1 == 2 +#define CONF_DMAC_TYPE_1 1 +#define CONF_DMAC_DSYNC_1 1 +#endif + +#if CONF_DMAC_TRIGSRC_1 == 0xFF +#define CONF_DMAC_SWREQ_1 1 +#else +#define CONF_DMAC_SWREQ_1 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_1_SETTINGS == 1 && CONF_DMAC_BEATSIZE_1 != 2 && ((!CONF_DMAC_SRCINC_1) || (!CONF_DMAC_DSTINC_1))) +#if (!CONF_DMAC_SRCINC_1) +#define CONF_DMAC_SRC_STRIDE_1 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_1) +#define CONF_DMAC_DES_STRIDE_1 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_1 +#define CONF_DMAC_SRC_STRIDE_1 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_1 +#define CONF_DMAC_DES_STRIDE_1 0 +#endif + +// Channel 2 settings +// dmac_channel_2_settings +#ifndef CONF_DMAC_CHANNEL_2_SETTINGS +#define CONF_DMAC_CHANNEL_2_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_2 +#ifndef CONF_DMAC_BURSTSIZE_2 +#define CONF_DMAC_BURSTSIZE_2 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_2 +#ifndef CONF_DMAC_CHUNKSIZE_2 +#define CONF_DMAC_CHUNKSIZE_2 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_2 +#ifndef CONF_DMAC_BEATSIZE_2 +#define CONF_DMAC_BEATSIZE_2 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_2 +#ifndef CONF_DMAC_SRC_INTERFACE_2 +#define CONF_DMAC_SRC_INTERFACE_2 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_2 +#ifndef CONF_DMAC_DES_INTERFACE_2 +#define CONF_DMAC_DES_INTERFACE_2 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_2 +#ifndef CONF_DMAC_SRCINC_2 +#define CONF_DMAC_SRCINC_2 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_2 +#ifndef CONF_DMAC_DSTINC_2 +#define CONF_DMAC_DSTINC_2 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_2 +#ifndef CONF_DMAC_TRANS_TYPE_2 +#define CONF_DMAC_TRANS_TYPE_2 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_2 +#ifndef CONF_DMAC_TRIGSRC_2 +#define CONF_DMAC_TRIGSRC_2 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_2 == 0 +#define CONF_DMAC_TYPE_2 0 +#define CONF_DMAC_DSYNC_2 0 +#elif CONF_DMAC_TRANS_TYPE_2 == 1 +#define CONF_DMAC_TYPE_2 1 +#define CONF_DMAC_DSYNC_2 0 +#elif CONF_DMAC_TRANS_TYPE_2 == 2 +#define CONF_DMAC_TYPE_2 1 +#define CONF_DMAC_DSYNC_2 1 +#endif + +#if CONF_DMAC_TRIGSRC_2 == 0xFF +#define CONF_DMAC_SWREQ_2 1 +#else +#define CONF_DMAC_SWREQ_2 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_2_SETTINGS == 1 && CONF_DMAC_BEATSIZE_2 != 2 && ((!CONF_DMAC_SRCINC_2) || (!CONF_DMAC_DSTINC_2))) +#if (!CONF_DMAC_SRCINC_2) +#define CONF_DMAC_SRC_STRIDE_2 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_2) +#define CONF_DMAC_DES_STRIDE_2 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_2 +#define CONF_DMAC_SRC_STRIDE_2 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_2 +#define CONF_DMAC_DES_STRIDE_2 0 +#endif + +// Channel 3 settings +// dmac_channel_3_settings +#ifndef CONF_DMAC_CHANNEL_3_SETTINGS +#define CONF_DMAC_CHANNEL_3_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_3 +#ifndef CONF_DMAC_BURSTSIZE_3 +#define CONF_DMAC_BURSTSIZE_3 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_3 +#ifndef CONF_DMAC_CHUNKSIZE_3 +#define CONF_DMAC_CHUNKSIZE_3 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_3 +#ifndef CONF_DMAC_BEATSIZE_3 +#define CONF_DMAC_BEATSIZE_3 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_3 +#ifndef CONF_DMAC_SRC_INTERFACE_3 +#define CONF_DMAC_SRC_INTERFACE_3 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_3 +#ifndef CONF_DMAC_DES_INTERFACE_3 +#define CONF_DMAC_DES_INTERFACE_3 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_3 +#ifndef CONF_DMAC_SRCINC_3 +#define CONF_DMAC_SRCINC_3 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_3 +#ifndef CONF_DMAC_DSTINC_3 +#define CONF_DMAC_DSTINC_3 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_3 +#ifndef CONF_DMAC_TRANS_TYPE_3 +#define CONF_DMAC_TRANS_TYPE_3 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_3 +#ifndef CONF_DMAC_TRIGSRC_3 +#define CONF_DMAC_TRIGSRC_3 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_3 == 0 +#define CONF_DMAC_TYPE_3 0 +#define CONF_DMAC_DSYNC_3 0 +#elif CONF_DMAC_TRANS_TYPE_3 == 1 +#define CONF_DMAC_TYPE_3 1 +#define CONF_DMAC_DSYNC_3 0 +#elif CONF_DMAC_TRANS_TYPE_3 == 2 +#define CONF_DMAC_TYPE_3 1 +#define CONF_DMAC_DSYNC_3 1 +#endif + +#if CONF_DMAC_TRIGSRC_3 == 0xFF +#define CONF_DMAC_SWREQ_3 1 +#else +#define CONF_DMAC_SWREQ_3 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_3_SETTINGS == 1 && CONF_DMAC_BEATSIZE_3 != 2 && ((!CONF_DMAC_SRCINC_3) || (!CONF_DMAC_DSTINC_3))) +#if (!CONF_DMAC_SRCINC_3) +#define CONF_DMAC_SRC_STRIDE_3 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_3) +#define CONF_DMAC_DES_STRIDE_3 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_3 +#define CONF_DMAC_SRC_STRIDE_3 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_3 +#define CONF_DMAC_DES_STRIDE_3 0 +#endif + +// Channel 4 settings +// dmac_channel_4_settings +#ifndef CONF_DMAC_CHANNEL_4_SETTINGS +#define CONF_DMAC_CHANNEL_4_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_4 +#ifndef CONF_DMAC_BURSTSIZE_4 +#define CONF_DMAC_BURSTSIZE_4 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_4 +#ifndef CONF_DMAC_CHUNKSIZE_4 +#define CONF_DMAC_CHUNKSIZE_4 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_4 +#ifndef CONF_DMAC_BEATSIZE_4 +#define CONF_DMAC_BEATSIZE_4 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_4 +#ifndef CONF_DMAC_SRC_INTERFACE_4 +#define CONF_DMAC_SRC_INTERFACE_4 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_4 +#ifndef CONF_DMAC_DES_INTERFACE_4 +#define CONF_DMAC_DES_INTERFACE_4 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_4 +#ifndef CONF_DMAC_SRCINC_4 +#define CONF_DMAC_SRCINC_4 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_4 +#ifndef CONF_DMAC_DSTINC_4 +#define CONF_DMAC_DSTINC_4 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_4 +#ifndef CONF_DMAC_TRANS_TYPE_4 +#define CONF_DMAC_TRANS_TYPE_4 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_4 +#ifndef CONF_DMAC_TRIGSRC_4 +#define CONF_DMAC_TRIGSRC_4 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_4 == 0 +#define CONF_DMAC_TYPE_4 0 +#define CONF_DMAC_DSYNC_4 0 +#elif CONF_DMAC_TRANS_TYPE_4 == 1 +#define CONF_DMAC_TYPE_4 1 +#define CONF_DMAC_DSYNC_4 0 +#elif CONF_DMAC_TRANS_TYPE_4 == 2 +#define CONF_DMAC_TYPE_4 1 +#define CONF_DMAC_DSYNC_4 1 +#endif + +#if CONF_DMAC_TRIGSRC_4 == 0xFF +#define CONF_DMAC_SWREQ_4 1 +#else +#define CONF_DMAC_SWREQ_4 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_4_SETTINGS == 1 && CONF_DMAC_BEATSIZE_4 != 2 && ((!CONF_DMAC_SRCINC_4) || (!CONF_DMAC_DSTINC_4))) +#if (!CONF_DMAC_SRCINC_4) +#define CONF_DMAC_SRC_STRIDE_4 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_4) +#define CONF_DMAC_DES_STRIDE_4 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_4 +#define CONF_DMAC_SRC_STRIDE_4 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_4 +#define CONF_DMAC_DES_STRIDE_4 0 +#endif + +// Channel 5 settings +// dmac_channel_5_settings +#ifndef CONF_DMAC_CHANNEL_5_SETTINGS +#define CONF_DMAC_CHANNEL_5_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_5 +#ifndef CONF_DMAC_BURSTSIZE_5 +#define CONF_DMAC_BURSTSIZE_5 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_5 +#ifndef CONF_DMAC_CHUNKSIZE_5 +#define CONF_DMAC_CHUNKSIZE_5 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_5 +#ifndef CONF_DMAC_BEATSIZE_5 +#define CONF_DMAC_BEATSIZE_5 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_5 +#ifndef CONF_DMAC_SRC_INTERFACE_5 +#define CONF_DMAC_SRC_INTERFACE_5 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_5 +#ifndef CONF_DMAC_DES_INTERFACE_5 +#define CONF_DMAC_DES_INTERFACE_5 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_5 +#ifndef CONF_DMAC_SRCINC_5 +#define CONF_DMAC_SRCINC_5 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_5 +#ifndef CONF_DMAC_DSTINC_5 +#define CONF_DMAC_DSTINC_5 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_5 +#ifndef CONF_DMAC_TRANS_TYPE_5 +#define CONF_DMAC_TRANS_TYPE_5 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_5 +#ifndef CONF_DMAC_TRIGSRC_5 +#define CONF_DMAC_TRIGSRC_5 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_5 == 0 +#define CONF_DMAC_TYPE_5 0 +#define CONF_DMAC_DSYNC_5 0 +#elif CONF_DMAC_TRANS_TYPE_5 == 1 +#define CONF_DMAC_TYPE_5 1 +#define CONF_DMAC_DSYNC_5 0 +#elif CONF_DMAC_TRANS_TYPE_5 == 2 +#define CONF_DMAC_TYPE_5 1 +#define CONF_DMAC_DSYNC_5 1 +#endif + +#if CONF_DMAC_TRIGSRC_5 == 0xFF +#define CONF_DMAC_SWREQ_5 1 +#else +#define CONF_DMAC_SWREQ_5 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_5_SETTINGS == 1 && CONF_DMAC_BEATSIZE_5 != 2 && ((!CONF_DMAC_SRCINC_5) || (!CONF_DMAC_DSTINC_5))) +#if (!CONF_DMAC_SRCINC_5) +#define CONF_DMAC_SRC_STRIDE_5 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_5) +#define CONF_DMAC_DES_STRIDE_5 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_5 +#define CONF_DMAC_SRC_STRIDE_5 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_5 +#define CONF_DMAC_DES_STRIDE_5 0 +#endif + +// Channel 6 settings +// dmac_channel_6_settings +#ifndef CONF_DMAC_CHANNEL_6_SETTINGS +#define CONF_DMAC_CHANNEL_6_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_6 +#ifndef CONF_DMAC_BURSTSIZE_6 +#define CONF_DMAC_BURSTSIZE_6 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_6 +#ifndef CONF_DMAC_CHUNKSIZE_6 +#define CONF_DMAC_CHUNKSIZE_6 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_6 +#ifndef CONF_DMAC_BEATSIZE_6 +#define CONF_DMAC_BEATSIZE_6 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_6 +#ifndef CONF_DMAC_SRC_INTERFACE_6 +#define CONF_DMAC_SRC_INTERFACE_6 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_6 +#ifndef CONF_DMAC_DES_INTERFACE_6 +#define CONF_DMAC_DES_INTERFACE_6 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_6 +#ifndef CONF_DMAC_SRCINC_6 +#define CONF_DMAC_SRCINC_6 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_6 +#ifndef CONF_DMAC_DSTINC_6 +#define CONF_DMAC_DSTINC_6 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_6 +#ifndef CONF_DMAC_TRANS_TYPE_6 +#define CONF_DMAC_TRANS_TYPE_6 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_6 +#ifndef CONF_DMAC_TRIGSRC_6 +#define CONF_DMAC_TRIGSRC_6 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_6 == 0 +#define CONF_DMAC_TYPE_6 0 +#define CONF_DMAC_DSYNC_6 0 +#elif CONF_DMAC_TRANS_TYPE_6 == 1 +#define CONF_DMAC_TYPE_6 1 +#define CONF_DMAC_DSYNC_6 0 +#elif CONF_DMAC_TRANS_TYPE_6 == 2 +#define CONF_DMAC_TYPE_6 1 +#define CONF_DMAC_DSYNC_6 1 +#endif + +#if CONF_DMAC_TRIGSRC_6 == 0xFF +#define CONF_DMAC_SWREQ_6 1 +#else +#define CONF_DMAC_SWREQ_6 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_6_SETTINGS == 1 && CONF_DMAC_BEATSIZE_6 != 2 && ((!CONF_DMAC_SRCINC_6) || (!CONF_DMAC_DSTINC_6))) +#if (!CONF_DMAC_SRCINC_6) +#define CONF_DMAC_SRC_STRIDE_6 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_6) +#define CONF_DMAC_DES_STRIDE_6 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_6 +#define CONF_DMAC_SRC_STRIDE_6 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_6 +#define CONF_DMAC_DES_STRIDE_6 0 +#endif + +// Channel 7 settings +// dmac_channel_7_settings +#ifndef CONF_DMAC_CHANNEL_7_SETTINGS +#define CONF_DMAC_CHANNEL_7_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_7 +#ifndef CONF_DMAC_BURSTSIZE_7 +#define CONF_DMAC_BURSTSIZE_7 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_7 +#ifndef CONF_DMAC_CHUNKSIZE_7 +#define CONF_DMAC_CHUNKSIZE_7 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_7 +#ifndef CONF_DMAC_BEATSIZE_7 +#define CONF_DMAC_BEATSIZE_7 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_7 +#ifndef CONF_DMAC_SRC_INTERFACE_7 +#define CONF_DMAC_SRC_INTERFACE_7 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_7 +#ifndef CONF_DMAC_DES_INTERFACE_7 +#define CONF_DMAC_DES_INTERFACE_7 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_7 +#ifndef CONF_DMAC_SRCINC_7 +#define CONF_DMAC_SRCINC_7 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_7 +#ifndef CONF_DMAC_DSTINC_7 +#define CONF_DMAC_DSTINC_7 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_7 +#ifndef CONF_DMAC_TRANS_TYPE_7 +#define CONF_DMAC_TRANS_TYPE_7 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_7 +#ifndef CONF_DMAC_TRIGSRC_7 +#define CONF_DMAC_TRIGSRC_7 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_7 == 0 +#define CONF_DMAC_TYPE_7 0 +#define CONF_DMAC_DSYNC_7 0 +#elif CONF_DMAC_TRANS_TYPE_7 == 1 +#define CONF_DMAC_TYPE_7 1 +#define CONF_DMAC_DSYNC_7 0 +#elif CONF_DMAC_TRANS_TYPE_7 == 2 +#define CONF_DMAC_TYPE_7 1 +#define CONF_DMAC_DSYNC_7 1 +#endif + +#if CONF_DMAC_TRIGSRC_7 == 0xFF +#define CONF_DMAC_SWREQ_7 1 +#else +#define CONF_DMAC_SWREQ_7 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_7_SETTINGS == 1 && CONF_DMAC_BEATSIZE_7 != 2 && ((!CONF_DMAC_SRCINC_7) || (!CONF_DMAC_DSTINC_7))) +#if (!CONF_DMAC_SRCINC_7) +#define CONF_DMAC_SRC_STRIDE_7 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_7) +#define CONF_DMAC_DES_STRIDE_7 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_7 +#define CONF_DMAC_SRC_STRIDE_7 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_7 +#define CONF_DMAC_DES_STRIDE_7 0 +#endif + +// Channel 8 settings +// dmac_channel_8_settings +#ifndef CONF_DMAC_CHANNEL_8_SETTINGS +#define CONF_DMAC_CHANNEL_8_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_8 +#ifndef CONF_DMAC_BURSTSIZE_8 +#define CONF_DMAC_BURSTSIZE_8 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_8 +#ifndef CONF_DMAC_CHUNKSIZE_8 +#define CONF_DMAC_CHUNKSIZE_8 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_8 +#ifndef CONF_DMAC_BEATSIZE_8 +#define CONF_DMAC_BEATSIZE_8 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_8 +#ifndef CONF_DMAC_SRC_INTERFACE_8 +#define CONF_DMAC_SRC_INTERFACE_8 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_8 +#ifndef CONF_DMAC_DES_INTERFACE_8 +#define CONF_DMAC_DES_INTERFACE_8 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_8 +#ifndef CONF_DMAC_SRCINC_8 +#define CONF_DMAC_SRCINC_8 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_8 +#ifndef CONF_DMAC_DSTINC_8 +#define CONF_DMAC_DSTINC_8 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_8 +#ifndef CONF_DMAC_TRANS_TYPE_8 +#define CONF_DMAC_TRANS_TYPE_8 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_8 +#ifndef CONF_DMAC_TRIGSRC_8 +#define CONF_DMAC_TRIGSRC_8 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_8 == 0 +#define CONF_DMAC_TYPE_8 0 +#define CONF_DMAC_DSYNC_8 0 +#elif CONF_DMAC_TRANS_TYPE_8 == 1 +#define CONF_DMAC_TYPE_8 1 +#define CONF_DMAC_DSYNC_8 0 +#elif CONF_DMAC_TRANS_TYPE_8 == 2 +#define CONF_DMAC_TYPE_8 1 +#define CONF_DMAC_DSYNC_8 1 +#endif + +#if CONF_DMAC_TRIGSRC_8 == 0xFF +#define CONF_DMAC_SWREQ_8 1 +#else +#define CONF_DMAC_SWREQ_8 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_8_SETTINGS == 1 && CONF_DMAC_BEATSIZE_8 != 2 && ((!CONF_DMAC_SRCINC_8) || (!CONF_DMAC_DSTINC_8))) +#if (!CONF_DMAC_SRCINC_8) +#define CONF_DMAC_SRC_STRIDE_8 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_8) +#define CONF_DMAC_DES_STRIDE_8 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_8 +#define CONF_DMAC_SRC_STRIDE_8 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_8 +#define CONF_DMAC_DES_STRIDE_8 0 +#endif + +// Channel 9 settings +// dmac_channel_9_settings +#ifndef CONF_DMAC_CHANNEL_9_SETTINGS +#define CONF_DMAC_CHANNEL_9_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_9 +#ifndef CONF_DMAC_BURSTSIZE_9 +#define CONF_DMAC_BURSTSIZE_9 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_9 +#ifndef CONF_DMAC_CHUNKSIZE_9 +#define CONF_DMAC_CHUNKSIZE_9 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_9 +#ifndef CONF_DMAC_BEATSIZE_9 +#define CONF_DMAC_BEATSIZE_9 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_9 +#ifndef CONF_DMAC_SRC_INTERFACE_9 +#define CONF_DMAC_SRC_INTERFACE_9 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_9 +#ifndef CONF_DMAC_DES_INTERFACE_9 +#define CONF_DMAC_DES_INTERFACE_9 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_9 +#ifndef CONF_DMAC_SRCINC_9 +#define CONF_DMAC_SRCINC_9 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_9 +#ifndef CONF_DMAC_DSTINC_9 +#define CONF_DMAC_DSTINC_9 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_9 +#ifndef CONF_DMAC_TRANS_TYPE_9 +#define CONF_DMAC_TRANS_TYPE_9 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_9 +#ifndef CONF_DMAC_TRIGSRC_9 +#define CONF_DMAC_TRIGSRC_9 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_9 == 0 +#define CONF_DMAC_TYPE_9 0 +#define CONF_DMAC_DSYNC_9 0 +#elif CONF_DMAC_TRANS_TYPE_9 == 1 +#define CONF_DMAC_TYPE_9 1 +#define CONF_DMAC_DSYNC_9 0 +#elif CONF_DMAC_TRANS_TYPE_9 == 2 +#define CONF_DMAC_TYPE_9 1 +#define CONF_DMAC_DSYNC_9 1 +#endif + +#if CONF_DMAC_TRIGSRC_9 == 0xFF +#define CONF_DMAC_SWREQ_9 1 +#else +#define CONF_DMAC_SWREQ_9 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_9_SETTINGS == 1 && CONF_DMAC_BEATSIZE_9 != 2 && ((!CONF_DMAC_SRCINC_9) || (!CONF_DMAC_DSTINC_9))) +#if (!CONF_DMAC_SRCINC_9) +#define CONF_DMAC_SRC_STRIDE_9 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_9) +#define CONF_DMAC_DES_STRIDE_9 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_9 +#define CONF_DMAC_SRC_STRIDE_9 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_9 +#define CONF_DMAC_DES_STRIDE_9 0 +#endif + +// Channel 10 settings +// dmac_channel_10_settings +#ifndef CONF_DMAC_CHANNEL_10_SETTINGS +#define CONF_DMAC_CHANNEL_10_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_10 +#ifndef CONF_DMAC_BURSTSIZE_10 +#define CONF_DMAC_BURSTSIZE_10 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_10 +#ifndef CONF_DMAC_CHUNKSIZE_10 +#define CONF_DMAC_CHUNKSIZE_10 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_10 +#ifndef CONF_DMAC_BEATSIZE_10 +#define CONF_DMAC_BEATSIZE_10 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_10 +#ifndef CONF_DMAC_SRC_INTERFACE_10 +#define CONF_DMAC_SRC_INTERFACE_10 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_10 +#ifndef CONF_DMAC_DES_INTERFACE_10 +#define CONF_DMAC_DES_INTERFACE_10 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_10 +#ifndef CONF_DMAC_SRCINC_10 +#define CONF_DMAC_SRCINC_10 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_10 +#ifndef CONF_DMAC_DSTINC_10 +#define CONF_DMAC_DSTINC_10 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_10 +#ifndef CONF_DMAC_TRANS_TYPE_10 +#define CONF_DMAC_TRANS_TYPE_10 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_10 +#ifndef CONF_DMAC_TRIGSRC_10 +#define CONF_DMAC_TRIGSRC_10 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_10 == 0 +#define CONF_DMAC_TYPE_10 0 +#define CONF_DMAC_DSYNC_10 0 +#elif CONF_DMAC_TRANS_TYPE_10 == 1 +#define CONF_DMAC_TYPE_10 1 +#define CONF_DMAC_DSYNC_10 0 +#elif CONF_DMAC_TRANS_TYPE_10 == 2 +#define CONF_DMAC_TYPE_10 1 +#define CONF_DMAC_DSYNC_10 1 +#endif + +#if CONF_DMAC_TRIGSRC_10 == 0xFF +#define CONF_DMAC_SWREQ_10 1 +#else +#define CONF_DMAC_SWREQ_10 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_10_SETTINGS == 1 && CONF_DMAC_BEATSIZE_10 != 2 \ + && ((!CONF_DMAC_SRCINC_10) || (!CONF_DMAC_DSTINC_10))) +#if (!CONF_DMAC_SRCINC_10) +#define CONF_DMAC_SRC_STRIDE_10 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_10) +#define CONF_DMAC_DES_STRIDE_10 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_10 +#define CONF_DMAC_SRC_STRIDE_10 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_10 +#define CONF_DMAC_DES_STRIDE_10 0 +#endif + +// Channel 11 settings +// dmac_channel_11_settings +#ifndef CONF_DMAC_CHANNEL_11_SETTINGS +#define CONF_DMAC_CHANNEL_11_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_11 +#ifndef CONF_DMAC_BURSTSIZE_11 +#define CONF_DMAC_BURSTSIZE_11 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_11 +#ifndef CONF_DMAC_CHUNKSIZE_11 +#define CONF_DMAC_CHUNKSIZE_11 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_11 +#ifndef CONF_DMAC_BEATSIZE_11 +#define CONF_DMAC_BEATSIZE_11 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_11 +#ifndef CONF_DMAC_SRC_INTERFACE_11 +#define CONF_DMAC_SRC_INTERFACE_11 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_11 +#ifndef CONF_DMAC_DES_INTERFACE_11 +#define CONF_DMAC_DES_INTERFACE_11 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_11 +#ifndef CONF_DMAC_SRCINC_11 +#define CONF_DMAC_SRCINC_11 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_11 +#ifndef CONF_DMAC_DSTINC_11 +#define CONF_DMAC_DSTINC_11 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_11 +#ifndef CONF_DMAC_TRANS_TYPE_11 +#define CONF_DMAC_TRANS_TYPE_11 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_11 +#ifndef CONF_DMAC_TRIGSRC_11 +#define CONF_DMAC_TRIGSRC_11 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_11 == 0 +#define CONF_DMAC_TYPE_11 0 +#define CONF_DMAC_DSYNC_11 0 +#elif CONF_DMAC_TRANS_TYPE_11 == 1 +#define CONF_DMAC_TYPE_11 1 +#define CONF_DMAC_DSYNC_11 0 +#elif CONF_DMAC_TRANS_TYPE_11 == 2 +#define CONF_DMAC_TYPE_11 1 +#define CONF_DMAC_DSYNC_11 1 +#endif + +#if CONF_DMAC_TRIGSRC_11 == 0xFF +#define CONF_DMAC_SWREQ_11 1 +#else +#define CONF_DMAC_SWREQ_11 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_11_SETTINGS == 1 && CONF_DMAC_BEATSIZE_11 != 2 \ + && ((!CONF_DMAC_SRCINC_11) || (!CONF_DMAC_DSTINC_11))) +#if (!CONF_DMAC_SRCINC_11) +#define CONF_DMAC_SRC_STRIDE_11 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_11) +#define CONF_DMAC_DES_STRIDE_11 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_11 +#define CONF_DMAC_SRC_STRIDE_11 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_11 +#define CONF_DMAC_DES_STRIDE_11 0 +#endif + +// Channel 12 settings +// dmac_channel_12_settings +#ifndef CONF_DMAC_CHANNEL_12_SETTINGS +#define CONF_DMAC_CHANNEL_12_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_12 +#ifndef CONF_DMAC_BURSTSIZE_12 +#define CONF_DMAC_BURSTSIZE_12 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_12 +#ifndef CONF_DMAC_CHUNKSIZE_12 +#define CONF_DMAC_CHUNKSIZE_12 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_12 +#ifndef CONF_DMAC_BEATSIZE_12 +#define CONF_DMAC_BEATSIZE_12 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_12 +#ifndef CONF_DMAC_SRC_INTERFACE_12 +#define CONF_DMAC_SRC_INTERFACE_12 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_12 +#ifndef CONF_DMAC_DES_INTERFACE_12 +#define CONF_DMAC_DES_INTERFACE_12 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_12 +#ifndef CONF_DMAC_SRCINC_12 +#define CONF_DMAC_SRCINC_12 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_12 +#ifndef CONF_DMAC_DSTINC_12 +#define CONF_DMAC_DSTINC_12 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_12 +#ifndef CONF_DMAC_TRANS_TYPE_12 +#define CONF_DMAC_TRANS_TYPE_12 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_12 +#ifndef CONF_DMAC_TRIGSRC_12 +#define CONF_DMAC_TRIGSRC_12 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_12 == 0 +#define CONF_DMAC_TYPE_12 0 +#define CONF_DMAC_DSYNC_12 0 +#elif CONF_DMAC_TRANS_TYPE_12 == 1 +#define CONF_DMAC_TYPE_12 1 +#define CONF_DMAC_DSYNC_12 0 +#elif CONF_DMAC_TRANS_TYPE_12 == 2 +#define CONF_DMAC_TYPE_12 1 +#define CONF_DMAC_DSYNC_12 1 +#endif + +#if CONF_DMAC_TRIGSRC_12 == 0xFF +#define CONF_DMAC_SWREQ_12 1 +#else +#define CONF_DMAC_SWREQ_12 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_12_SETTINGS == 1 && CONF_DMAC_BEATSIZE_12 != 2 \ + && ((!CONF_DMAC_SRCINC_12) || (!CONF_DMAC_DSTINC_12))) +#if (!CONF_DMAC_SRCINC_12) +#define CONF_DMAC_SRC_STRIDE_12 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_12) +#define CONF_DMAC_DES_STRIDE_12 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_12 +#define CONF_DMAC_SRC_STRIDE_12 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_12 +#define CONF_DMAC_DES_STRIDE_12 0 +#endif + +// Channel 13 settings +// dmac_channel_13_settings +#ifndef CONF_DMAC_CHANNEL_13_SETTINGS +#define CONF_DMAC_CHANNEL_13_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_13 +#ifndef CONF_DMAC_BURSTSIZE_13 +#define CONF_DMAC_BURSTSIZE_13 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_13 +#ifndef CONF_DMAC_CHUNKSIZE_13 +#define CONF_DMAC_CHUNKSIZE_13 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_13 +#ifndef CONF_DMAC_BEATSIZE_13 +#define CONF_DMAC_BEATSIZE_13 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_13 +#ifndef CONF_DMAC_SRC_INTERFACE_13 +#define CONF_DMAC_SRC_INTERFACE_13 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_13 +#ifndef CONF_DMAC_DES_INTERFACE_13 +#define CONF_DMAC_DES_INTERFACE_13 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_13 +#ifndef CONF_DMAC_SRCINC_13 +#define CONF_DMAC_SRCINC_13 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_13 +#ifndef CONF_DMAC_DSTINC_13 +#define CONF_DMAC_DSTINC_13 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_13 +#ifndef CONF_DMAC_TRANS_TYPE_13 +#define CONF_DMAC_TRANS_TYPE_13 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_13 +#ifndef CONF_DMAC_TRIGSRC_13 +#define CONF_DMAC_TRIGSRC_13 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_13 == 0 +#define CONF_DMAC_TYPE_13 0 +#define CONF_DMAC_DSYNC_13 0 +#elif CONF_DMAC_TRANS_TYPE_13 == 1 +#define CONF_DMAC_TYPE_13 1 +#define CONF_DMAC_DSYNC_13 0 +#elif CONF_DMAC_TRANS_TYPE_13 == 2 +#define CONF_DMAC_TYPE_13 1 +#define CONF_DMAC_DSYNC_13 1 +#endif + +#if CONF_DMAC_TRIGSRC_13 == 0xFF +#define CONF_DMAC_SWREQ_13 1 +#else +#define CONF_DMAC_SWREQ_13 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_13_SETTINGS == 1 && CONF_DMAC_BEATSIZE_13 != 2 \ + && ((!CONF_DMAC_SRCINC_13) || (!CONF_DMAC_DSTINC_13))) +#if (!CONF_DMAC_SRCINC_13) +#define CONF_DMAC_SRC_STRIDE_13 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_13) +#define CONF_DMAC_DES_STRIDE_13 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_13 +#define CONF_DMAC_SRC_STRIDE_13 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_13 +#define CONF_DMAC_DES_STRIDE_13 0 +#endif + +// Channel 14 settings +// dmac_channel_14_settings +#ifndef CONF_DMAC_CHANNEL_14_SETTINGS +#define CONF_DMAC_CHANNEL_14_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_14 +#ifndef CONF_DMAC_BURSTSIZE_14 +#define CONF_DMAC_BURSTSIZE_14 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_14 +#ifndef CONF_DMAC_CHUNKSIZE_14 +#define CONF_DMAC_CHUNKSIZE_14 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_14 +#ifndef CONF_DMAC_BEATSIZE_14 +#define CONF_DMAC_BEATSIZE_14 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_14 +#ifndef CONF_DMAC_SRC_INTERFACE_14 +#define CONF_DMAC_SRC_INTERFACE_14 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_14 +#ifndef CONF_DMAC_DES_INTERFACE_14 +#define CONF_DMAC_DES_INTERFACE_14 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_14 +#ifndef CONF_DMAC_SRCINC_14 +#define CONF_DMAC_SRCINC_14 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_14 +#ifndef CONF_DMAC_DSTINC_14 +#define CONF_DMAC_DSTINC_14 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_14 +#ifndef CONF_DMAC_TRANS_TYPE_14 +#define CONF_DMAC_TRANS_TYPE_14 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_14 +#ifndef CONF_DMAC_TRIGSRC_14 +#define CONF_DMAC_TRIGSRC_14 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_14 == 0 +#define CONF_DMAC_TYPE_14 0 +#define CONF_DMAC_DSYNC_14 0 +#elif CONF_DMAC_TRANS_TYPE_14 == 1 +#define CONF_DMAC_TYPE_14 1 +#define CONF_DMAC_DSYNC_14 0 +#elif CONF_DMAC_TRANS_TYPE_14 == 2 +#define CONF_DMAC_TYPE_14 1 +#define CONF_DMAC_DSYNC_14 1 +#endif + +#if CONF_DMAC_TRIGSRC_14 == 0xFF +#define CONF_DMAC_SWREQ_14 1 +#else +#define CONF_DMAC_SWREQ_14 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_14_SETTINGS == 1 && CONF_DMAC_BEATSIZE_14 != 2 \ + && ((!CONF_DMAC_SRCINC_14) || (!CONF_DMAC_DSTINC_14))) +#if (!CONF_DMAC_SRCINC_14) +#define CONF_DMAC_SRC_STRIDE_14 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_14) +#define CONF_DMAC_DES_STRIDE_14 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_14 +#define CONF_DMAC_SRC_STRIDE_14 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_14 +#define CONF_DMAC_DES_STRIDE_14 0 +#endif + +// Channel 15 settings +// dmac_channel_15_settings +#ifndef CONF_DMAC_CHANNEL_15_SETTINGS +#define CONF_DMAC_CHANNEL_15_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_15 +#ifndef CONF_DMAC_BURSTSIZE_15 +#define CONF_DMAC_BURSTSIZE_15 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_15 +#ifndef CONF_DMAC_CHUNKSIZE_15 +#define CONF_DMAC_CHUNKSIZE_15 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_15 +#ifndef CONF_DMAC_BEATSIZE_15 +#define CONF_DMAC_BEATSIZE_15 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_15 +#ifndef CONF_DMAC_SRC_INTERFACE_15 +#define CONF_DMAC_SRC_INTERFACE_15 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_15 +#ifndef CONF_DMAC_DES_INTERFACE_15 +#define CONF_DMAC_DES_INTERFACE_15 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_15 +#ifndef CONF_DMAC_SRCINC_15 +#define CONF_DMAC_SRCINC_15 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_15 +#ifndef CONF_DMAC_DSTINC_15 +#define CONF_DMAC_DSTINC_15 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_15 +#ifndef CONF_DMAC_TRANS_TYPE_15 +#define CONF_DMAC_TRANS_TYPE_15 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_15 +#ifndef CONF_DMAC_TRIGSRC_15 +#define CONF_DMAC_TRIGSRC_15 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_15 == 0 +#define CONF_DMAC_TYPE_15 0 +#define CONF_DMAC_DSYNC_15 0 +#elif CONF_DMAC_TRANS_TYPE_15 == 1 +#define CONF_DMAC_TYPE_15 1 +#define CONF_DMAC_DSYNC_15 0 +#elif CONF_DMAC_TRANS_TYPE_15 == 2 +#define CONF_DMAC_TYPE_15 1 +#define CONF_DMAC_DSYNC_15 1 +#endif + +#if CONF_DMAC_TRIGSRC_15 == 0xFF +#define CONF_DMAC_SWREQ_15 1 +#else +#define CONF_DMAC_SWREQ_15 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_15_SETTINGS == 1 && CONF_DMAC_BEATSIZE_15 != 2 \ + && ((!CONF_DMAC_SRCINC_15) || (!CONF_DMAC_DSTINC_15))) +#if (!CONF_DMAC_SRCINC_15) +#define CONF_DMAC_SRC_STRIDE_15 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_15) +#define CONF_DMAC_DES_STRIDE_15 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_15 +#define CONF_DMAC_SRC_STRIDE_15 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_15 +#define CONF_DMAC_DES_STRIDE_15 0 +#endif + +// Channel 16 settings +// dmac_channel_16_settings +#ifndef CONF_DMAC_CHANNEL_16_SETTINGS +#define CONF_DMAC_CHANNEL_16_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_16 +#ifndef CONF_DMAC_BURSTSIZE_16 +#define CONF_DMAC_BURSTSIZE_16 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_16 +#ifndef CONF_DMAC_CHUNKSIZE_16 +#define CONF_DMAC_CHUNKSIZE_16 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_16 +#ifndef CONF_DMAC_BEATSIZE_16 +#define CONF_DMAC_BEATSIZE_16 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_16 +#ifndef CONF_DMAC_SRC_INTERFACE_16 +#define CONF_DMAC_SRC_INTERFACE_16 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_16 +#ifndef CONF_DMAC_DES_INTERFACE_16 +#define CONF_DMAC_DES_INTERFACE_16 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_16 +#ifndef CONF_DMAC_SRCINC_16 +#define CONF_DMAC_SRCINC_16 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_16 +#ifndef CONF_DMAC_DSTINC_16 +#define CONF_DMAC_DSTINC_16 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_16 +#ifndef CONF_DMAC_TRANS_TYPE_16 +#define CONF_DMAC_TRANS_TYPE_16 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_16 +#ifndef CONF_DMAC_TRIGSRC_16 +#define CONF_DMAC_TRIGSRC_16 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_16 == 0 +#define CONF_DMAC_TYPE_16 0 +#define CONF_DMAC_DSYNC_16 0 +#elif CONF_DMAC_TRANS_TYPE_16 == 1 +#define CONF_DMAC_TYPE_16 1 +#define CONF_DMAC_DSYNC_16 0 +#elif CONF_DMAC_TRANS_TYPE_16 == 2 +#define CONF_DMAC_TYPE_16 1 +#define CONF_DMAC_DSYNC_16 1 +#endif + +#if CONF_DMAC_TRIGSRC_16 == 0xFF +#define CONF_DMAC_SWREQ_16 1 +#else +#define CONF_DMAC_SWREQ_16 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_16_SETTINGS == 1 && CONF_DMAC_BEATSIZE_16 != 2 \ + && ((!CONF_DMAC_SRCINC_16) || (!CONF_DMAC_DSTINC_16))) +#if (!CONF_DMAC_SRCINC_16) +#define CONF_DMAC_SRC_STRIDE_16 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_16) +#define CONF_DMAC_DES_STRIDE_16 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_16 +#define CONF_DMAC_SRC_STRIDE_16 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_16 +#define CONF_DMAC_DES_STRIDE_16 0 +#endif + +// Channel 17 settings +// dmac_channel_17_settings +#ifndef CONF_DMAC_CHANNEL_17_SETTINGS +#define CONF_DMAC_CHANNEL_17_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_17 +#ifndef CONF_DMAC_BURSTSIZE_17 +#define CONF_DMAC_BURSTSIZE_17 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_17 +#ifndef CONF_DMAC_CHUNKSIZE_17 +#define CONF_DMAC_CHUNKSIZE_17 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_17 +#ifndef CONF_DMAC_BEATSIZE_17 +#define CONF_DMAC_BEATSIZE_17 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_17 +#ifndef CONF_DMAC_SRC_INTERFACE_17 +#define CONF_DMAC_SRC_INTERFACE_17 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_17 +#ifndef CONF_DMAC_DES_INTERFACE_17 +#define CONF_DMAC_DES_INTERFACE_17 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_17 +#ifndef CONF_DMAC_SRCINC_17 +#define CONF_DMAC_SRCINC_17 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_17 +#ifndef CONF_DMAC_DSTINC_17 +#define CONF_DMAC_DSTINC_17 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_17 +#ifndef CONF_DMAC_TRANS_TYPE_17 +#define CONF_DMAC_TRANS_TYPE_17 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_17 +#ifndef CONF_DMAC_TRIGSRC_17 +#define CONF_DMAC_TRIGSRC_17 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_17 == 0 +#define CONF_DMAC_TYPE_17 0 +#define CONF_DMAC_DSYNC_17 0 +#elif CONF_DMAC_TRANS_TYPE_17 == 1 +#define CONF_DMAC_TYPE_17 1 +#define CONF_DMAC_DSYNC_17 0 +#elif CONF_DMAC_TRANS_TYPE_17 == 2 +#define CONF_DMAC_TYPE_17 1 +#define CONF_DMAC_DSYNC_17 1 +#endif + +#if CONF_DMAC_TRIGSRC_17 == 0xFF +#define CONF_DMAC_SWREQ_17 1 +#else +#define CONF_DMAC_SWREQ_17 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_17_SETTINGS == 1 && CONF_DMAC_BEATSIZE_17 != 2 \ + && ((!CONF_DMAC_SRCINC_17) || (!CONF_DMAC_DSTINC_17))) +#if (!CONF_DMAC_SRCINC_17) +#define CONF_DMAC_SRC_STRIDE_17 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_17) +#define CONF_DMAC_DES_STRIDE_17 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_17 +#define CONF_DMAC_SRC_STRIDE_17 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_17 +#define CONF_DMAC_DES_STRIDE_17 0 +#endif + +// Channel 18 settings +// dmac_channel_18_settings +#ifndef CONF_DMAC_CHANNEL_18_SETTINGS +#define CONF_DMAC_CHANNEL_18_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_18 +#ifndef CONF_DMAC_BURSTSIZE_18 +#define CONF_DMAC_BURSTSIZE_18 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_18 +#ifndef CONF_DMAC_CHUNKSIZE_18 +#define CONF_DMAC_CHUNKSIZE_18 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_18 +#ifndef CONF_DMAC_BEATSIZE_18 +#define CONF_DMAC_BEATSIZE_18 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_18 +#ifndef CONF_DMAC_SRC_INTERFACE_18 +#define CONF_DMAC_SRC_INTERFACE_18 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_18 +#ifndef CONF_DMAC_DES_INTERFACE_18 +#define CONF_DMAC_DES_INTERFACE_18 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_18 +#ifndef CONF_DMAC_SRCINC_18 +#define CONF_DMAC_SRCINC_18 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_18 +#ifndef CONF_DMAC_DSTINC_18 +#define CONF_DMAC_DSTINC_18 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_18 +#ifndef CONF_DMAC_TRANS_TYPE_18 +#define CONF_DMAC_TRANS_TYPE_18 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_18 +#ifndef CONF_DMAC_TRIGSRC_18 +#define CONF_DMAC_TRIGSRC_18 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_18 == 0 +#define CONF_DMAC_TYPE_18 0 +#define CONF_DMAC_DSYNC_18 0 +#elif CONF_DMAC_TRANS_TYPE_18 == 1 +#define CONF_DMAC_TYPE_18 1 +#define CONF_DMAC_DSYNC_18 0 +#elif CONF_DMAC_TRANS_TYPE_18 == 2 +#define CONF_DMAC_TYPE_18 1 +#define CONF_DMAC_DSYNC_18 1 +#endif + +#if CONF_DMAC_TRIGSRC_18 == 0xFF +#define CONF_DMAC_SWREQ_18 1 +#else +#define CONF_DMAC_SWREQ_18 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_18_SETTINGS == 1 && CONF_DMAC_BEATSIZE_18 != 2 \ + && ((!CONF_DMAC_SRCINC_18) || (!CONF_DMAC_DSTINC_18))) +#if (!CONF_DMAC_SRCINC_18) +#define CONF_DMAC_SRC_STRIDE_18 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_18) +#define CONF_DMAC_DES_STRIDE_18 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_18 +#define CONF_DMAC_SRC_STRIDE_18 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_18 +#define CONF_DMAC_DES_STRIDE_18 0 +#endif + +// Channel 19 settings +// dmac_channel_19_settings +#ifndef CONF_DMAC_CHANNEL_19_SETTINGS +#define CONF_DMAC_CHANNEL_19_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_19 +#ifndef CONF_DMAC_BURSTSIZE_19 +#define CONF_DMAC_BURSTSIZE_19 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_19 +#ifndef CONF_DMAC_CHUNKSIZE_19 +#define CONF_DMAC_CHUNKSIZE_19 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_19 +#ifndef CONF_DMAC_BEATSIZE_19 +#define CONF_DMAC_BEATSIZE_19 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_19 +#ifndef CONF_DMAC_SRC_INTERFACE_19 +#define CONF_DMAC_SRC_INTERFACE_19 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_19 +#ifndef CONF_DMAC_DES_INTERFACE_19 +#define CONF_DMAC_DES_INTERFACE_19 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_19 +#ifndef CONF_DMAC_SRCINC_19 +#define CONF_DMAC_SRCINC_19 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_19 +#ifndef CONF_DMAC_DSTINC_19 +#define CONF_DMAC_DSTINC_19 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_19 +#ifndef CONF_DMAC_TRANS_TYPE_19 +#define CONF_DMAC_TRANS_TYPE_19 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_19 +#ifndef CONF_DMAC_TRIGSRC_19 +#define CONF_DMAC_TRIGSRC_19 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_19 == 0 +#define CONF_DMAC_TYPE_19 0 +#define CONF_DMAC_DSYNC_19 0 +#elif CONF_DMAC_TRANS_TYPE_19 == 1 +#define CONF_DMAC_TYPE_19 1 +#define CONF_DMAC_DSYNC_19 0 +#elif CONF_DMAC_TRANS_TYPE_19 == 2 +#define CONF_DMAC_TYPE_19 1 +#define CONF_DMAC_DSYNC_19 1 +#endif + +#if CONF_DMAC_TRIGSRC_19 == 0xFF +#define CONF_DMAC_SWREQ_19 1 +#else +#define CONF_DMAC_SWREQ_19 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_19_SETTINGS == 1 && CONF_DMAC_BEATSIZE_19 != 2 \ + && ((!CONF_DMAC_SRCINC_19) || (!CONF_DMAC_DSTINC_19))) +#if (!CONF_DMAC_SRCINC_19) +#define CONF_DMAC_SRC_STRIDE_19 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_19) +#define CONF_DMAC_DES_STRIDE_19 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_19 +#define CONF_DMAC_SRC_STRIDE_19 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_19 +#define CONF_DMAC_DES_STRIDE_19 0 +#endif + +// Channel 20 settings +// dmac_channel_20_settings +#ifndef CONF_DMAC_CHANNEL_20_SETTINGS +#define CONF_DMAC_CHANNEL_20_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_20 +#ifndef CONF_DMAC_BURSTSIZE_20 +#define CONF_DMAC_BURSTSIZE_20 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_20 +#ifndef CONF_DMAC_CHUNKSIZE_20 +#define CONF_DMAC_CHUNKSIZE_20 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_20 +#ifndef CONF_DMAC_BEATSIZE_20 +#define CONF_DMAC_BEATSIZE_20 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_20 +#ifndef CONF_DMAC_SRC_INTERFACE_20 +#define CONF_DMAC_SRC_INTERFACE_20 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_20 +#ifndef CONF_DMAC_DES_INTERFACE_20 +#define CONF_DMAC_DES_INTERFACE_20 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_20 +#ifndef CONF_DMAC_SRCINC_20 +#define CONF_DMAC_SRCINC_20 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_20 +#ifndef CONF_DMAC_DSTINC_20 +#define CONF_DMAC_DSTINC_20 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_20 +#ifndef CONF_DMAC_TRANS_TYPE_20 +#define CONF_DMAC_TRANS_TYPE_20 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_20 +#ifndef CONF_DMAC_TRIGSRC_20 +#define CONF_DMAC_TRIGSRC_20 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_20 == 0 +#define CONF_DMAC_TYPE_20 0 +#define CONF_DMAC_DSYNC_20 0 +#elif CONF_DMAC_TRANS_TYPE_20 == 1 +#define CONF_DMAC_TYPE_20 1 +#define CONF_DMAC_DSYNC_20 0 +#elif CONF_DMAC_TRANS_TYPE_20 == 2 +#define CONF_DMAC_TYPE_20 1 +#define CONF_DMAC_DSYNC_20 1 +#endif + +#if CONF_DMAC_TRIGSRC_20 == 0xFF +#define CONF_DMAC_SWREQ_20 1 +#else +#define CONF_DMAC_SWREQ_20 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_20_SETTINGS == 1 && CONF_DMAC_BEATSIZE_20 != 2 \ + && ((!CONF_DMAC_SRCINC_20) || (!CONF_DMAC_DSTINC_20))) +#if (!CONF_DMAC_SRCINC_20) +#define CONF_DMAC_SRC_STRIDE_20 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_20) +#define CONF_DMAC_DES_STRIDE_20 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_20 +#define CONF_DMAC_SRC_STRIDE_20 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_20 +#define CONF_DMAC_DES_STRIDE_20 0 +#endif + +// Channel 21 settings +// dmac_channel_21_settings +#ifndef CONF_DMAC_CHANNEL_21_SETTINGS +#define CONF_DMAC_CHANNEL_21_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_21 +#ifndef CONF_DMAC_BURSTSIZE_21 +#define CONF_DMAC_BURSTSIZE_21 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_21 +#ifndef CONF_DMAC_CHUNKSIZE_21 +#define CONF_DMAC_CHUNKSIZE_21 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_21 +#ifndef CONF_DMAC_BEATSIZE_21 +#define CONF_DMAC_BEATSIZE_21 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_21 +#ifndef CONF_DMAC_SRC_INTERFACE_21 +#define CONF_DMAC_SRC_INTERFACE_21 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_21 +#ifndef CONF_DMAC_DES_INTERFACE_21 +#define CONF_DMAC_DES_INTERFACE_21 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_21 +#ifndef CONF_DMAC_SRCINC_21 +#define CONF_DMAC_SRCINC_21 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_21 +#ifndef CONF_DMAC_DSTINC_21 +#define CONF_DMAC_DSTINC_21 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_21 +#ifndef CONF_DMAC_TRANS_TYPE_21 +#define CONF_DMAC_TRANS_TYPE_21 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_21 +#ifndef CONF_DMAC_TRIGSRC_21 +#define CONF_DMAC_TRIGSRC_21 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_21 == 0 +#define CONF_DMAC_TYPE_21 0 +#define CONF_DMAC_DSYNC_21 0 +#elif CONF_DMAC_TRANS_TYPE_21 == 1 +#define CONF_DMAC_TYPE_21 1 +#define CONF_DMAC_DSYNC_21 0 +#elif CONF_DMAC_TRANS_TYPE_21 == 2 +#define CONF_DMAC_TYPE_21 1 +#define CONF_DMAC_DSYNC_21 1 +#endif + +#if CONF_DMAC_TRIGSRC_21 == 0xFF +#define CONF_DMAC_SWREQ_21 1 +#else +#define CONF_DMAC_SWREQ_21 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_21_SETTINGS == 1 && CONF_DMAC_BEATSIZE_21 != 2 \ + && ((!CONF_DMAC_SRCINC_21) || (!CONF_DMAC_DSTINC_21))) +#if (!CONF_DMAC_SRCINC_21) +#define CONF_DMAC_SRC_STRIDE_21 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_21) +#define CONF_DMAC_DES_STRIDE_21 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_21 +#define CONF_DMAC_SRC_STRIDE_21 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_21 +#define CONF_DMAC_DES_STRIDE_21 0 +#endif + +// Channel 22 settings +// dmac_channel_22_settings +#ifndef CONF_DMAC_CHANNEL_22_SETTINGS +#define CONF_DMAC_CHANNEL_22_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_22 +#ifndef CONF_DMAC_BURSTSIZE_22 +#define CONF_DMAC_BURSTSIZE_22 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_22 +#ifndef CONF_DMAC_CHUNKSIZE_22 +#define CONF_DMAC_CHUNKSIZE_22 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_22 +#ifndef CONF_DMAC_BEATSIZE_22 +#define CONF_DMAC_BEATSIZE_22 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_22 +#ifndef CONF_DMAC_SRC_INTERFACE_22 +#define CONF_DMAC_SRC_INTERFACE_22 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_22 +#ifndef CONF_DMAC_DES_INTERFACE_22 +#define CONF_DMAC_DES_INTERFACE_22 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_22 +#ifndef CONF_DMAC_SRCINC_22 +#define CONF_DMAC_SRCINC_22 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_22 +#ifndef CONF_DMAC_DSTINC_22 +#define CONF_DMAC_DSTINC_22 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_22 +#ifndef CONF_DMAC_TRANS_TYPE_22 +#define CONF_DMAC_TRANS_TYPE_22 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_22 +#ifndef CONF_DMAC_TRIGSRC_22 +#define CONF_DMAC_TRIGSRC_22 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_22 == 0 +#define CONF_DMAC_TYPE_22 0 +#define CONF_DMAC_DSYNC_22 0 +#elif CONF_DMAC_TRANS_TYPE_22 == 1 +#define CONF_DMAC_TYPE_22 1 +#define CONF_DMAC_DSYNC_22 0 +#elif CONF_DMAC_TRANS_TYPE_22 == 2 +#define CONF_DMAC_TYPE_22 1 +#define CONF_DMAC_DSYNC_22 1 +#endif + +#if CONF_DMAC_TRIGSRC_22 == 0xFF +#define CONF_DMAC_SWREQ_22 1 +#else +#define CONF_DMAC_SWREQ_22 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_22_SETTINGS == 1 && CONF_DMAC_BEATSIZE_22 != 2 \ + && ((!CONF_DMAC_SRCINC_22) || (!CONF_DMAC_DSTINC_22))) +#if (!CONF_DMAC_SRCINC_22) +#define CONF_DMAC_SRC_STRIDE_22 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_22) +#define CONF_DMAC_DES_STRIDE_22 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_22 +#define CONF_DMAC_SRC_STRIDE_22 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_22 +#define CONF_DMAC_DES_STRIDE_22 0 +#endif + +// Channel 23 settings +// dmac_channel_23_settings +#ifndef CONF_DMAC_CHANNEL_23_SETTINGS +#define CONF_DMAC_CHANNEL_23_SETTINGS 0 +#endif + +// Burst Size +// <0x0=> 1 burst size +// <0x1=> 4 burst size +// <0x2=> 8 burst size +// <0x3=> 16 burst size +// Define the memory burst size +// dmac_burstsize_23 +#ifndef CONF_DMAC_BURSTSIZE_23 +#define CONF_DMAC_BURSTSIZE_23 0x0 +#endif + +// Chunk Size +// <0x0=> 1 data transferred +// <0x1=> 2 data transferred +// <0x2=> 4 data transferred +// <0x3=> 8 data transferred +// <0x4=> 16 data transferred +// Define the peripheral chunk size +// dmac_chunksize_23 +#ifndef CONF_DMAC_CHUNKSIZE_23 +#define CONF_DMAC_CHUNKSIZE_23 0x0 +#endif + +// Beat Size +// <0=> 8-bit bus transfer +// <1=> 16-bit bus transfer +// <2=> 32-bit bus transfer +// Defines the size of one beat +// dmac_beatsize_23 +#ifndef CONF_DMAC_BEATSIZE_23 +#define CONF_DMAC_BEATSIZE_23 0x0 +#endif + +// Source Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is read through the system bus interface 0 or 1 +// dma_src_interface_23 +#ifndef CONF_DMAC_SRC_INTERFACE_23 +#define CONF_DMAC_SRC_INTERFACE_23 0x0 +#endif + +// Destination Interface Identifier +// <0x0=> AHB_IF0 +// <0x1=> AHB_IF1 +// Define the data is written through the system bus interface 0 or 1 +// dma_des_interface_23 +#ifndef CONF_DMAC_DES_INTERFACE_23 +#define CONF_DMAC_DES_INTERFACE_23 0x0 +#endif + +// Source Address Increment +// Indicates whether the source address incremented as beat size or not +// dmac_srcinc_23 +#ifndef CONF_DMAC_SRCINC_23 +#define CONF_DMAC_SRCINC_23 0 +#endif + +// Destination Address Increment +// Indicates whether the destination address incremented as beat size or not +// dmac_dstinc_23 +#ifndef CONF_DMAC_DSTINC_23 +#define CONF_DMAC_DSTINC_23 0 +#endif + +// Transfer Type +// <0x0=> Memory to Memory Transfer +// <0x1=> Peripheral to Memory Transfer +// <0x2=> Memory to Peripheral Transfer +// Define the data transfer type +// dma_trans_type_23 +#ifndef CONF_DMAC_TRANS_TYPE_23 +#define CONF_DMAC_TRANS_TYPE_23 0x0 +#endif + +// Trigger source +// <0xFF=> Software Trigger +// <0x00=> HSMCI TX/RX Trigger +// <0x01=> SPI0 TX Trigger +// <0x02=> SPI0 RX Trigger +// <0x03=> SPI1 TX Trigger +// <0x04=> SPI1 RX Trigger +// <0x05=> QSPI TX Trigger +// <0x06=> QSPI RX Trigger +// <0x07=> USART0 TX Trigger +// <0x08=> USART0 RX Trigger +// <0x09=> USART1 TX Trigger +// <0x0A=> USART1 RX Trigger +// <0x0B=> USART2 TX Trigger +// <0x0C=> USART2 RX Trigger +// <0x0D=> PWM0 TX Trigger +// <0x0E=> TWIHS0 TX Trigger +// <0x0F=> TWIHS0 RX Trigger +// <0x10=> TWIHS1 TX Trigger +// <0x11=> TWIHS1 RX Trigger +// <0x12=> TWIHS2 TX Trigger +// <0x13=> TWIHS2 RX Trigger +// <0x14=> UART0 TX Trigger +// <0x15=> UART0 RX Trigger +// <0x16=> UART1 TX Trigger +// <0x17=> UART1 RX Trigger +// <0x18=> UART2 TX Trigger +// <0x19=> UART2 RX Trigger +// <0x1A=> UART3 TX Trigger +// <0x1B=> UART3 RX Trigger +// <0x1C=> UART4 TX Trigger +// <0x1D=> UART4 RX Trigger +// <0x1E=> DACC TX Trigger +// <0x20=> SSC TX Trigger +// <0x21=> SSC RX Trigger +// <0x22=> PIOA RX Trigger +// <0x23=> AFEC0 RX Trigger +// <0x24=> AFEC1 RX Trigger +// <0x25=> AES TX Trigger +// <0x26=> AES RX Trigger +// <0x27=> PWM1 TX Trigger +// <0x28=> TC0 RX Trigger +// <0x29=> TC3 RX Trigger +// <0x2A=> TC6 RX Trigger +// <0x2B=> TC9 RX Trigger +// <0x2C=> I2SC0 TX Left Trigger +// <0x2D=> I2SC0 RX Left Trigger +// <0x2E=> I2SC1 TX Left Trigger +// <0x2F=> I2SC1 RX Left Trigger +// <0x30=> I2SC0 TX Right Trigger +// <0x31=> I2SC0 RX Right Trigger +// <0x32=> I2SC1 TX Right Trigger +// <0x33=> I2SC1 RX Right Trigger +// Define the DMA trigger source +// dmac_trifsrc_23 +#ifndef CONF_DMAC_TRIGSRC_23 +#define CONF_DMAC_TRIGSRC_23 0xff +#endif + +// + +#if CONF_DMAC_TRANS_TYPE_23 == 0 +#define CONF_DMAC_TYPE_23 0 +#define CONF_DMAC_DSYNC_23 0 +#elif CONF_DMAC_TRANS_TYPE_23 == 1 +#define CONF_DMAC_TYPE_23 1 +#define CONF_DMAC_DSYNC_23 0 +#elif CONF_DMAC_TRANS_TYPE_23 == 2 +#define CONF_DMAC_TYPE_23 1 +#define CONF_DMAC_DSYNC_23 1 +#endif + +#if CONF_DMAC_TRIGSRC_23 == 0xFF +#define CONF_DMAC_SWREQ_23 1 +#else +#define CONF_DMAC_SWREQ_23 0 +#endif + +/* Errata: If XDMA is used to transfer 8-bit or 16-bit data in fixed source address + * or fixed destination address mode, source and destination addresses are incremented + * by 8-bit or 16-bit. + * Workaround: The user can fix the problem by setting the source addressing mode to + * use microblock and data striding with microblock stride set to 0 and data stride set to -1. + */ +#if (CONF_DMAC_CHANNEL_23_SETTINGS == 1 && CONF_DMAC_BEATSIZE_23 != 2 \ + && ((!CONF_DMAC_SRCINC_23) || (!CONF_DMAC_DSTINC_23))) +#if (!CONF_DMAC_SRCINC_23) +#define CONF_DMAC_SRC_STRIDE_23 ((int16_t)(-1)) +#endif +#if (!CONF_DMAC_DSTINC_23) +#define CONF_DMAC_DES_STRIDE_23 ((int16_t)(-1)) +#endif +#endif + +#ifndef CONF_DMAC_SRC_STRIDE_23 +#define CONF_DMAC_SRC_STRIDE_23 0 +#endif + +#ifndef CONF_DMAC_DES_STRIDE_23 +#define CONF_DMAC_DES_STRIDE_23 0 +#endif + +// + +// <<< end of configuration section >>> + +#endif // HPL_XDMAC_CONFIG_H diff --git a/hw/bsp/same7x/boards/same70_xplained/peripheral_clk_config.h b/hw/bsp/same7x/boards/same70_xplained/peripheral_clk_config.h new file mode 100644 index 000000000..84756f5ac --- /dev/null +++ b/hw/bsp/same7x/boards/same70_xplained/peripheral_clk_config.h @@ -0,0 +1,126 @@ +/* Auto-generated config file peripheral_clk_config.h */ +#ifndef PERIPHERAL_CLK_CONFIG_H +#define PERIPHERAL_CLK_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +/** + * \def CONF_HCLK_FREQUENCY + * \brief HCLK's Clock frequency + */ +#ifndef CONF_HCLK_FREQUENCY +#define CONF_HCLK_FREQUENCY 300000000 +#endif + +/** + * \def CONF_FCLK_FREQUENCY + * \brief FCLK's Clock frequency + */ +#ifndef CONF_FCLK_FREQUENCY +#define CONF_FCLK_FREQUENCY 300000000 +#endif + +/** + * \def CONF_CPU_FREQUENCY + * \brief CPU's Clock frequency + */ +#ifndef CONF_CPU_FREQUENCY +#define CONF_CPU_FREQUENCY 300000000 +#endif + +/** + * \def CONF_SLCK_FREQUENCY + * \brief Slow Clock frequency + */ +#define CONF_SLCK_FREQUENCY 0 + +/** + * \def CONF_MCK_FREQUENCY + * \brief Master Clock frequency + */ +#define CONF_MCK_FREQUENCY 150000000 + +/** + * \def CONF_PCK6_FREQUENCY + * \brief Programmable Clock Controller 6 frequency + */ +#define CONF_PCK6_FREQUENCY 1714285 + +// USART Clock Settings +// USART Clock source + +// <0=> Master Clock (MCK) +// <1=> MCK / 8 for USART +// <2=> Programmable Clock Controller 4 (PMC_PCK4) +// <3=> External Clock +// This defines the clock source for the USART +// usart_clock_source +#ifndef CONF_USART1_CK_SRC +#define CONF_USART1_CK_SRC 0 +#endif + +// USART External Clock Input on SCK <1-4294967295> +// Inputs the external clock frequency on SCK +// usart_clock_freq +#ifndef CONF_USART1_SCK_FREQ +#define CONF_USART1_SCK_FREQ 10000000 +#endif + +// + +/** + * \def USART FREQUENCY + * \brief USART's Clock frequency + */ +#ifndef CONF_USART1_FREQUENCY +#define CONF_USART1_FREQUENCY 150000000 +#endif + +#ifndef CONF_SRC_USB_480M +#define CONF_SRC_USB_480M 0 +#endif + +#ifndef CONF_SRC_USB_48M +#define CONF_SRC_USB_48M 1 +#endif + +// USB Full/Low Speed Clock +// USB Clock Controller (USB_48M) +// usb_fsls_clock_source +// 48MHz clock source for low speed and full speed. +// It must be available when low speed is supported by host driver. +// It must be available when low power mode is selected. +#ifndef CONF_USBHS_FSLS_SRC +#define CONF_USBHS_FSLS_SRC CONF_SRC_USB_48M +#endif + +// USB Clock Source(Normal/Low-power Mode Selection) +// USB High Speed Clock (USB_480M) +// USB Clock Controller (USB_48M) +// usb_clock_source +// Select the clock source for USB. +// In normal mode, use "USB High Speed Clock (USB_480M)". +// In low-power mode, use "USB Clock Controller (USB_48M)". +#ifndef CONF_USBHS_SRC +#define CONF_USBHS_SRC CONF_SRC_USB_480M +#endif + +/** + * \def CONF_USBHS_FSLS_FREQUENCY + * \brief USBHS's Full/Low Speed Clock Source frequency + */ +#ifndef CONF_USBHS_FSLS_FREQUENCY +#define CONF_USBHS_FSLS_FREQUENCY 48000000 +#endif + +/** + * \def CONF_USBHS_FREQUENCY + * \brief USBHS's Selected Clock Source frequency + */ +#ifndef CONF_USBHS_FREQUENCY +#define CONF_USBHS_FREQUENCY 480000000 +#endif + +// <<< end of configuration section >>> + +#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/hw/bsp/same7x/family.c b/hw/bsp/same7x/family.c new file mode 100644 index 000000000..572c83588 --- /dev/null +++ b/hw/bsp/same7x/family.c @@ -0,0 +1,196 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to do so, subject to the + * following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: Microchip +*/ + +#include "bsp/board_api.h" +#include "sam.h" + +#include "hal/include/hal_gpio.h" +#include "hal/include/hal_init.h" +#include "hal/include/hal_usart_async.h" +#include "hpl/pmc/hpl_pmc.h" +#include "hpl/usart/hpl_usart_base.h" +#include "peripheral_clk_config.h" + +static inline void board_vbus_set(uint8_t rhport, bool state); +void _init(void); +#include "board.h" + +#ifndef LED_STATE_ON + #define LED_STATE_ON 1 +#endif + +#ifndef LED_PORT_CLOCK + #define LED_PORT_CLOCK ID_PIOA +#endif + +#ifndef BUTTON_PORT_CLOCK + #define BUTTON_PORT_CLOCK ID_PIOA +#endif + +#ifndef UART_PORT_CLOCK + #define UART_PORT_CLOCK ID_USART1 +#endif + +#ifndef BOARD_USART + #define BOARD_USART USART1 +#endif + +#ifndef BOARD_UART_DESCRIPTOR + #define BOARD_UART_DESCRIPTOR edbg_com +#endif + +#ifndef BOARD_UART_BUFFER + #define BOARD_UART_BUFFER edbg_com_buffer +#endif + +#ifndef BUTTON_STATE_ACTIVE + #define BUTTON_STATE_ACTIVE 0 +#endif + +#ifndef UART_TX_FUNCTION + #define UART_TX_FUNCTION MUX_PB4D_USART1_TXD1 +#endif + +#ifndef UART_RX_FUNCTION + #define UART_RX_FUNCTION MUX_PA21A_USART1_RXD1 +#endif + +#ifndef UART_BUFFER_SIZE + #define UART_BUFFER_SIZE 64 +#endif + +#define LED_STATE_OFF (1 - LED_STATE_ON) + +static struct usart_async_descriptor BOARD_UART_DESCRIPTOR; +static uint8_t BOARD_UART_BUFFER[UART_BUFFER_SIZE]; +static volatile bool uart_busy = false; + +static void tx_complete_cb(const struct usart_async_descriptor *const io_descr) { + (void) io_descr; + uart_busy = false; +} + +void board_init(void) { + init_mcu(); + + /* Disable Watchdog */ + hri_wdt_set_MR_WDDIS_bit(WDT); + +#ifdef LED_PIN + _pmc_enable_periph_clock(LED_PORT_CLOCK); + gpio_set_pin_level(LED_PIN, LED_STATE_OFF); + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); +#endif + +#ifdef BUTTON_PIN + _pmc_enable_periph_clock(BUTTON_PORT_CLOCK); + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULL_DOWN : GPIO_PULL_UP); + gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); +#endif + + _pmc_enable_periph_clock(UART_PORT_CLOCK); + gpio_set_pin_function(UART_RX_PIN, UART_RX_FUNCTION); + gpio_set_pin_function(UART_TX_PIN, UART_TX_FUNCTION); + + usart_async_init(&BOARD_UART_DESCRIPTOR, BOARD_USART, BOARD_UART_BUFFER, sizeof(BOARD_UART_BUFFER), _usart_get_usart_async()); + usart_async_set_baud_rate(&BOARD_UART_DESCRIPTOR, CFG_BOARD_UART_BAUDRATE); + usart_async_register_callback(&BOARD_UART_DESCRIPTOR, USART_ASYNC_TXC_CB, tx_complete_cb); + usart_async_enable(&BOARD_UART_DESCRIPTOR); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer (SystemCoreClock may not be correct after init) + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#endif + + // Enable USB clock + _pmc_enable_periph_clock(ID_USBHS); + +#if CFG_TUH_ENABLED + board_vbus_set(0, true); +#endif +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USBHS_Handler(void) { + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { +#ifdef LED_PIN + gpio_set_pin_level(LED_PIN, state ? LED_STATE_ON : LED_STATE_OFF); +#else + (void) state; +#endif +} + +uint32_t board_button_read(void) { +#ifdef BUTTON_PIN + return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); +#else + return 0; +#endif +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { + while (uart_busy) {} + uart_busy = true; + + io_write(&BOARD_UART_DESCRIPTOR.io, buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif + +void _init(void) { +} diff --git a/hw/bsp/same7x/family.cmake b/hw/bsp/same7x/family.cmake new file mode 100644 index 000000000..a1eb197a3 --- /dev/null +++ b/hw/bsp/same7x/family.cmake @@ -0,0 +1,121 @@ +include_guard() + +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +set(SDK_DIR ${TOP}/hw/mcu/microchip/same70) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m7 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS SAMX7X CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(STARTUP_FILE_GNU ${SDK_DIR}/same70b/gcc/gcc/startup_same70q21b.c) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + if (NOT DEFINED LD_FILE_Clang) + set(LD_FILE_Clang ${LD_FILE_GNU}) + endif () + + if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${LD_FILE_GNU}) + endif () + + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/same70b/gcc/system_same70q21b.c + ${SDK_DIR}/hpl/core/hpl_init.c + ${SDK_DIR}/hpl/usart/hpl_usart.c + ${SDK_DIR}/hpl/pmc/hpl_pmc.c + ${SDK_DIR}/hal/src/hal_usart_async.c + ${SDK_DIR}/hal/src/hal_io.c + ${SDK_DIR}/hal/src/hal_atomic.c + ${SDK_DIR}/hal/utils/src/utils_ringbuffer.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR} + ${SDK_DIR}/config + ${SDK_DIR}/same70b/include + ${SDK_DIR}/hal/include + ${SDK_DIR}/hal/utils/include + ${SDK_DIR}/hpl/core + ${SDK_DIR}/hpl/pio + ${SDK_DIR}/hpl/pmc + ${SDK_DIR}/hri + ${SDK_DIR}/CMSIS/Core/Include + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + target_compile_options(${BOARD_TARGET} PUBLIC + -Wno-error=unused-parameter + -Wno-error=cast-align + -Wno-error=redundant-decls + -Wno-error=cast-qual + ) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + add_board_target(board_${BOARD}) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + family_add_tinyusb(${TARGET} OPT_MCU_SAMX7X) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/microchip/samx7x/dcd_samx7x.c + ) + + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_compile_options(${TARGET} PUBLIC + -Wno-error=unused-parameter + -Wno-error=cast-align + -Wno-error=redundant-decls + -Wno-error=cast-qual + ) + + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/same7x/family.mk b/hw/bsp/same7x/family.mk new file mode 100644 index 000000000..c8fa74d71 --- /dev/null +++ b/hw/bsp/same7x/family.mk @@ -0,0 +1,56 @@ +SDK_DIR = hw/mcu/microchip/same70 + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m7 + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_SAMX7X + +# suppress following warnings from mcu driver +CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=redundant-decls + +# SAM driver is flooded with -Wcast-qual which slows down compilation significantly +CFLAGS_SKIP += -Wcast-qual + +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + +# All source paths should be relative to the top level. +LD_FILE = $(SDK_DIR)/same70b/gcc/gcc/same70q21b_flash.ld + +SRC_C += \ + src/portable/microchip/samx7x/dcd_samx7x.c \ + $(SDK_DIR)/same70b/gcc/gcc/startup_same70q21b.c \ + $(SDK_DIR)/same70b/gcc/system_same70q21b.c \ + $(SDK_DIR)/hpl/core/hpl_init.c \ + $(SDK_DIR)/hpl/usart/hpl_usart.c \ + $(SDK_DIR)/hpl/pmc/hpl_pmc.c \ + $(SDK_DIR)/hal/src/hal_usart_async.c \ + $(SDK_DIR)/hal/src/hal_io.c \ + $(SDK_DIR)/hal/src/hal_atomic.c \ + $(SDK_DIR)/hal/utils/src/utils_ringbuffer.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_DIR) \ + $(TOP)/$(SDK_DIR)/config \ + $(TOP)/$(SDK_DIR)/same70b/include \ + $(TOP)/$(SDK_DIR)/hal/include \ + $(TOP)/$(SDK_DIR)/hal/utils/include \ + $(TOP)/$(SDK_DIR)/hpl/core \ + $(TOP)/$(SDK_DIR)/hpl/pio \ + $(TOP)/$(SDK_DIR)/hpl/pmc \ + $(TOP)/$(SDK_DIR)/hri \ + $(TOP)/$(SDK_DIR)/CMSIS/Core/Include + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7 + +# For flash-jlink target +flash: $(BUILD)/$(PROJECT).bin + edbg --verbose -t same70 -pv -f $< -- cgit v1.3.1 From 0a2b6e77da336e7fa579f194cb16a7160d5dab02 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 14 Oct 2025 17:33:56 +0700 Subject: more warnings fix --- examples/device/uac2_speaker_fb/src/main.c | 4 ++-- examples/host/cdc_msc_hid_freertos/src/hid_app.c | 1 + examples/host/device_info/src/main.c | 4 +--- examples/host/msc_file_explorer/CMakeLists.txt | 2 +- 4 files changed, 5 insertions(+), 6 deletions(-) diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index ed9e7716d..e742dc52a 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -159,7 +159,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); audio_control_cur_4_t curf = {(int32_t) tu_htole32(current_sample_rate)}; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &curf, sizeof(curf)); @@ -200,7 +200,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *) buf)->bCur; - TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); return true; } else { diff --git a/examples/host/cdc_msc_hid_freertos/src/hid_app.c b/examples/host/cdc_msc_hid_freertos/src/hid_app.c index 0b4ee2c78..79e0b5a28 100644 --- a/examples/host/cdc_msc_hid_freertos/src/hid_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/hid_app.c @@ -211,6 +211,7 @@ static void process_mouse_report(hid_mouse_report_t const *report) { //--------------------------------------------------------------------+ static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) { (void) dev_addr; + (void) len; uint8_t const rpt_count = hid_info[instance].report_count; tuh_hid_report_info_t *rpt_info_arr = hid_info[instance].report_info; diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 419806551..f71702efc 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -171,9 +171,7 @@ void tuh_mount_cb(uint8_t daddr) { printf("\r\n"); printf(" iSerialNumber %u ", desc.device.iSerialNumber); - printf((char*)desc.serial); // serial is already to UTF-8 - printf("\r\n"); - + printf("%s\r\n", (char*)desc.serial); // serial is already to UTF-8 printf(" bNumConfigurations %u\r\n", desc.device.bNumConfigurations); } diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index 5ac75c04a..95d532fc9 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -27,7 +27,7 @@ target_sources(${PROJECT} PUBLIC ) # Suppress warnings on fatfs -if (CMAKE_C_COMPILER_ID STREQUAL "GNU") +if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties( ${TOP}/lib/fatfs/source/ff.c PROPERTIES -- cgit v1.3.1 From c48bbfab5e9ae9a417e30b0f9c0280d6f662b01c Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 14 Oct 2025 17:53:55 +0700 Subject: more make refactor --- examples/build_system/make/rules.mk | 195 --------------------- examples/device/audio_4_channel_mic/Makefile | 6 +- .../device/audio_4_channel_mic_freertos/Makefile | 6 +- examples/device/audio_test/Makefile | 6 +- examples/device/audio_test_freertos/Makefile | 6 +- examples/device/audio_test_multi_rate/Makefile | 6 +- examples/device/board_test/Makefile | 6 +- examples/device/cdc_dual_ports/Makefile | 6 +- examples/device/cdc_msc/Makefile | 6 +- examples/device/cdc_msc_freertos/Makefile | 6 +- examples/device/cdc_uac2/Makefile | 6 +- examples/device/dfu/Makefile | 6 +- examples/device/dfu_runtime/Makefile | 6 +- examples/device/dynamic_configuration/Makefile | 6 +- examples/device/hid_boot_interface/Makefile | 6 +- examples/device/hid_composite/Makefile | 6 +- examples/device/hid_composite_freertos/Makefile | 6 +- examples/device/hid_generic_inout/Makefile | 6 +- examples/device/hid_multiple_interface/Makefile | 6 +- examples/device/midi_test/Makefile | 6 +- examples/device/midi_test_freertos/Makefile | 6 +- examples/device/msc_dual_lun/Makefile | 6 +- examples/device/mtp/Makefile | 6 +- examples/device/net_lwip_webserver/Makefile | 5 +- examples/device/uac2_headset/Makefile | 6 +- examples/device/uac2_speaker_fb/Makefile | 6 +- examples/device/usbtmc/Makefile | 6 +- examples/device/video_capture/Makefile | 6 +- examples/device/video_capture_2ch/Makefile | 6 +- examples/device/webusb_serial/Makefile | 6 +- examples/dual/host_hid_to_device_cdc/Makefile | 6 +- examples/dual/host_info_to_device_cdc/Makefile | 6 +- examples/host/bare_api/Makefile | 6 +- examples/host/cdc_msc_hid/Makefile | 6 +- examples/host/cdc_msc_hid_freertos/Makefile | 6 +- examples/host/device_info/Makefile | 6 +- examples/host/hid_controller/Makefile | 6 +- examples/host/midi_rx/Makefile | 6 +- examples/host/msc_file_explorer/Makefile | 5 +- examples/typec/power_delivery/Makefile | 10 +- hw/bsp/family_rules.mk | 177 +++++++++++++++++++ hw/bsp/family_support.mk | 8 +- test/fuzz/device/cdc/Makefile | 6 +- test/fuzz/device/msc/Makefile | 6 +- test/fuzz/device/net/Makefile | 5 +- test/fuzz/make.mk | 6 +- 46 files changed, 310 insertions(+), 329 deletions(-) delete mode 100644 examples/build_system/make/rules.mk create mode 100644 hw/bsp/family_rules.mk diff --git a/examples/build_system/make/rules.mk b/examples/build_system/make/rules.mk deleted file mode 100644 index 86de17b6c..000000000 --- a/examples/build_system/make/rules.mk +++ /dev/null @@ -1,195 +0,0 @@ -# --------------------------------------- -# Common make rules for all examples -# --------------------------------------- - -# Set all as default goal -.DEFAULT_GOAL := all - -# ---------------- GNU Make Start ----------------------- -# ESP32-Sx and RP2040 has its own CMake build system -ifeq (,$(findstring $(FAMILY),espressif rp2040)) - -# --------------------------------------- -# Rules -# --------------------------------------- - -all: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex size - -uf2: $(BUILD)/$(PROJECT).uf2 - -# We set vpath to point to the top of the tree so that the source files -# can be located. By following this scheme, it allows a single build rule -# to be used to compile all .c files. -vpath %.c . $(TOP) -vpath %.s . $(TOP) -vpath %.S . $(TOP) - -include ${TOP}/examples/build_system/make/toolchain/$(TOOLCHAIN)_rules.mk - -# --------------------------------------- -# Compiler Flags -# --------------------------------------- - -CFLAGS += $(addprefix -I,$(INC)) - -# Verbose mode -ifeq ("$(V)","1") -$(info CFLAGS $(CFLAGS) ) $(info ) -$(info LDFLAGS $(LDFLAGS)) $(info ) -$(info ASFLAGS $(ASFLAGS)) $(info ) -endif - - -OBJ_DIRS = $(sort $(dir $(OBJ))) -$(OBJ): | $(OBJ_DIRS) -$(OBJ_DIRS): -ifeq ($(CMDEXE),1) - -@$(MKDIR) $(subst /,\,$@) -else - @$(MKDIR) -p $@ -endif - -# UF2 generation, iMXRT need to strip to text only before conversion -ifneq ($(FAMILY),imxrt) -$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).hex - @echo CREATE $@ - $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -c -o $@ $^ -endif - -copy-artifact: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex $(BUILD)/$(PROJECT).uf2 - -endif -# ---------------- GNU Make End ----------------------- - -.PHONY: clean -clean: -ifeq ($(CMDEXE),1) - rd /S /Q $(subst /,\,$(BUILD)) -else - $(RM) -rf $(BUILD) -endif - -# get depenecies -.PHONY: get-deps -get-deps: - $(PYTHON) $(TOP)/tools/get_deps.py ${FAMILY} - -.PHONY: size -size: $(BUILD)/$(PROJECT).elf - -@echo '' - @$(SIZE) $< - -@echo '' - -# linkermap must be install previously at https://github.com/hathach/linkermap -linkermap: $(BUILD)/$(PROJECT).elf - @linkermap -v $<.map - -# --------------------------------------- -# Flash Targets -# --------------------------------------- - -# --------------- Jlink ----------------- -ifeq ($(OS),Windows_NT) - JLINKEXE = JLink.exe -else - JLINKEXE = JLinkExe -endif - -# Jlink Interface -JLINK_IF ?= swd - -# Jlink script -$(BUILD)/$(BOARD).jlink: $(BUILD)/$(PROJECT).hex - @echo halt > $@ - @echo loadfile $^ >> $@ - @echo r >> $@ - @echo go >> $@ - @echo exit >> $@ - -# Flash using jlink -flash-jlink: $(BUILD)/$(BOARD).jlink - $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $< - -# --------------- stm32 cube programmer ----------------- -# Flash STM32 MCU using stlink with STM32 Cube Programmer CLI -flash-stlink: $(BUILD)/$(PROJECT).elf - STM32_Programmer_CLI --connect port=swd --write $< --go - -# --------------- xfel ----------------- -$(BUILD)/$(PROJECT)-sunxi.bin: $(BUILD)/$(PROJECT).bin - $(PYTHON) $(TOP)/tools/mksunxi.py $< $@ - -flash-xfel: $(BUILD)/$(PROJECT)-sunxi.bin - xfel spinor write 0 $< - xfel reset - -# --------------- pyocd ----------------- -PYOCD_OPTION ?= -flash-pyocd: $(BUILD)/$(PROJECT).hex - pyocd flash -t $(PYOCD_TARGET) $(PYOCD_OPTION) $< - #pyocd reset -t $(PYOCD_TARGET) - -# --------------- openocd ----------------- -OPENOCD_OPTION ?= -flash-openocd: $(BUILD)/$(PROJECT).elf - openocd $(OPENOCD_OPTION) -c "program $< verify reset exit" - -# --------------- openocd-wch ----------------- -# wch-linke is not supported yet in official openOCD yet. We need to either use -# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or -# 2. compiled from https://github.com/hathach/riscv-openocd-wch or -# https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz -# with ./configure --disable-werror --enable-wlinke --enable-ch347=no -OPENOCD_WCH ?= /home/${USER}/app/riscv-openocd-wch/src/openocd -OPENOCD_WCH_OPTION ?= -flash-openocd-wch: $(BUILD)/$(PROJECT).elf - $(OPENOCD_WCH) $(OPENOCD_WCH_OPTION) -c init -c halt -c "flash write_image $<" -c reset -c exit - -# --------------- wlink-rs ----------------- -# flash with https://github.com/ch32-rs/wlink -WLINK_RS ?= wlink -flash-wlink-rs: $(BUILD)/$(PROJECT).elf - $(WLINK_RS) flash $< - -# --------------- dfu-util ----------------- -DFU_UTIL_OPTION ?= -a 0 -flash-dfu-util: $(BUILD)/$(PROJECT).bin - dfu-util -R $(DFU_UTIL_OPTION) -D $< - -# --------------- Black Magic ----------------- -# This symlink is created by https://github.com/blacksphere/blackmagic/blob/master/driver/99-blackmagic.rules -BMP ?= /dev/ttyBmpGdb - -flash-bmp: $(BUILD)/$(PROJECT).elf - $(GDB) --batch -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' -ex load $< - -debug-bmp: $(BUILD)/$(PROJECT).elf - $(GDB) -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' $< - -# --------------- TI Uniflash ----------------- -DSLITE ?= dslite.sh -flash-uniflash: $(BUILD)/$(PROJECT).hex - ${DSLITE} ${UNIFLASH_OPTION} -f $< - -#-------------- Artifacts -------------- - -# Create binary directory -$(BIN): -ifeq ($(CMDEXE),1) - @$(MKDIR) $(subst /,\,$@) -else - @$(MKDIR) -p $@ -endif - -# Copy binaries .elf, .bin, .hex, .uf2 to BIN for upload -# due to large size of combined artifacts, only uf2 is uploaded for now -copy-artifact: $(BIN) - @$(CP) $(BUILD)/$(PROJECT).uf2 $(BIN) - #@$(CP) $(BUILD)/$(PROJECT).bin $(BIN) - #@$(CP) $(BUILD)/$(PROJECT).hex $(BIN) - #@$(CP) $(BUILD)/$(PROJECT).elf $(BIN) - -# Print out the value of a make variable. -# https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile -print-%: - @echo $* = $($*) diff --git a/examples/device/audio_4_channel_mic/Makefile b/examples/device/audio_4_channel_mic/Makefile index 4cf2d9e49..31e2c6f44 100644 --- a/examples/device/audio_4_channel_mic/Makefile +++ b/examples/device/audio_4_channel_mic/Makefile @@ -2,13 +2,13 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += \ src/main.c \ src/usb_descriptors.c \ -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/audio_4_channel_mic_freertos/Makefile b/examples/device/audio_4_channel_mic_freertos/Makefile index 13c637977..3c421af74 100644 --- a/examples/device/audio_4_channel_mic_freertos/Makefile +++ b/examples/device/audio_4_channel_mic_freertos/Makefile @@ -3,13 +3,13 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE = \ src/main.c \ src/usb_descriptors.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/audio_test/Makefile b/examples/device/audio_test/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/audio_test/Makefile +++ b/examples/device/audio_test/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/audio_test_freertos/Makefile b/examples/device/audio_test_freertos/Makefile index 13c637977..3c421af74 100644 --- a/examples/device/audio_test_freertos/Makefile +++ b/examples/device/audio_test_freertos/Makefile @@ -3,13 +3,13 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE = \ src/main.c \ src/usb_descriptors.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/audio_test_multi_rate/Makefile b/examples/device/audio_test_multi_rate/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/audio_test_multi_rate/Makefile +++ b/examples/device/audio_test_multi_rate/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/board_test/Makefile b/examples/device/board_test/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/board_test/Makefile +++ b/examples/device/board_test/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/cdc_dual_ports/Makefile b/examples/device/cdc_dual_ports/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/cdc_dual_ports/Makefile +++ b/examples/device/cdc_dual_ports/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/cdc_msc/Makefile b/examples/device/cdc_msc/Makefile index eb548f018..de50d118f 100644 --- a/examples/device/cdc_msc/Makefile +++ b/examples/device/cdc_msc/Makefile @@ -2,7 +2,7 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += \ @@ -10,6 +10,6 @@ EXAMPLE_SOURCE += \ src/msc_disk.c \ src/usb_descriptors.c \ -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 41960e64c..dbab13395 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -3,7 +3,7 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE = \ @@ -11,6 +11,6 @@ EXAMPLE_SOURCE = \ src/msc_disk.c \ src/usb_descriptors.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/cdc_uac2/Makefile b/examples/device/cdc_uac2/Makefile index 539077d6c..6276be8d0 100644 --- a/examples/device/cdc_uac2/Makefile +++ b/examples/device/cdc_uac2/Makefile @@ -2,7 +2,7 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += \ @@ -11,6 +11,6 @@ EXAMPLE_SOURCE += \ src/uac2_app.c \ src/usb_descriptors.c \ -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/dfu/Makefile b/examples/device/dfu/Makefile index ad7a37b79..9e1eab4a2 100644 --- a/examples/device/dfu/Makefile +++ b/examples/device/dfu/Makefile @@ -2,13 +2,13 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE = \ src/main.c \ src/usb_descriptors.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/dfu_runtime/Makefile b/examples/device/dfu_runtime/Makefile index 72bd56ede..1a4b428dc 100644 --- a/examples/device/dfu_runtime/Makefile +++ b/examples/device/dfu_runtime/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/dynamic_configuration/Makefile b/examples/device/dynamic_configuration/Makefile index 72bd56ede..1a4b428dc 100644 --- a/examples/device/dynamic_configuration/Makefile +++ b/examples/device/dynamic_configuration/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/hid_boot_interface/Makefile b/examples/device/hid_boot_interface/Makefile index ad7a37b79..9e1eab4a2 100644 --- a/examples/device/hid_boot_interface/Makefile +++ b/examples/device/hid_boot_interface/Makefile @@ -2,13 +2,13 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE = \ src/main.c \ src/usb_descriptors.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/hid_composite/Makefile b/examples/device/hid_composite/Makefile index 72bd56ede..1a4b428dc 100644 --- a/examples/device/hid_composite/Makefile +++ b/examples/device/hid_composite/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index 13c637977..3c421af74 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -3,13 +3,13 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE = \ src/main.c \ src/usb_descriptors.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/hid_generic_inout/Makefile b/examples/device/hid_generic_inout/Makefile index 72bd56ede..1a4b428dc 100644 --- a/examples/device/hid_generic_inout/Makefile +++ b/examples/device/hid_generic_inout/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/hid_multiple_interface/Makefile b/examples/device/hid_multiple_interface/Makefile index 72bd56ede..1a4b428dc 100644 --- a/examples/device/hid_multiple_interface/Makefile +++ b/examples/device/hid_multiple_interface/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/midi_test/Makefile b/examples/device/midi_test/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/midi_test/Makefile +++ b/examples/device/midi_test/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/midi_test_freertos/Makefile b/examples/device/midi_test_freertos/Makefile index 704d319d2..ebacfecdf 100644 --- a/examples/device/midi_test_freertos/Makefile +++ b/examples/device/midi_test_freertos/Makefile @@ -3,13 +3,13 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += \ src/main.c \ src/usb_descriptors.c \ -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/msc_dual_lun/Makefile b/examples/device/msc_dual_lun/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/msc_dual_lun/Makefile +++ b/examples/device/msc_dual_lun/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/mtp/Makefile b/examples/device/mtp/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/mtp/Makefile +++ b/examples/device/mtp/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile index 82c946b14..9d8e8ec77 100644 --- a/examples/device/net_lwip_webserver/Makefile +++ b/examples/device/net_lwip_webserver/Makefile @@ -8,7 +8,6 @@ CFLAGS_GCC += \ INC += \ src \ - $(TOP)/hw \ $(TOP)/lib/lwip/src/include \ $(TOP)/lib/lwip/src/include/ipv4 \ $(TOP)/lib/lwip/src/include/lwip/apps \ @@ -16,7 +15,7 @@ INC += \ # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) # lwip sources SRC_C += \ @@ -66,4 +65,4 @@ SRC_C += \ lib/networking/dnserver.c \ lib/networking/rndis_reports.c -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/uac2_headset/Makefile b/examples/device/uac2_headset/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/uac2_headset/Makefile +++ b/examples/device/uac2_headset/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/uac2_speaker_fb/Makefile b/examples/device/uac2_speaker_fb/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/uac2_speaker_fb/Makefile +++ b/examples/device/uac2_speaker_fb/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/usbtmc/Makefile b/examples/device/usbtmc/Makefile index 72bd56ede..1a4b428dc 100644 --- a/examples/device/usbtmc/Makefile +++ b/examples/device/usbtmc/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/video_capture/Makefile b/examples/device/video_capture/Makefile index 288e9ffc3..6c248ab7b 100644 --- a/examples/device/video_capture/Makefile +++ b/examples/device/video_capture/Makefile @@ -9,10 +9,10 @@ endif INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/video_capture_2ch/Makefile b/examples/device/video_capture_2ch/Makefile index 288e9ffc3..6c248ab7b 100644 --- a/examples/device/video_capture_2ch/Makefile +++ b/examples/device/video_capture_2ch/Makefile @@ -9,10 +9,10 @@ endif INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/webusb_serial/Makefile b/examples/device/webusb_serial/Makefile index e8cacd359..035e90308 100644 --- a/examples/device/webusb_serial/Makefile +++ b/examples/device/webusb_serial/Makefile @@ -2,10 +2,10 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/dual/host_hid_to_device_cdc/Makefile b/examples/dual/host_hid_to_device_cdc/Makefile index 76c6db0ac..a51251bf9 100644 --- a/examples/dual/host_hid_to_device_cdc/Makefile +++ b/examples/dual/host_hid_to_device_cdc/Makefile @@ -2,11 +2,11 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) CFLAGS_GCC += -Wno-error=cast-align -Wno-error=null-dereference @@ -15,4 +15,4 @@ SRC_C += \ src/host/hub.c \ src/host/usbh.c -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/dual/host_info_to_device_cdc/Makefile b/examples/dual/host_info_to_device_cdc/Makefile index 071185c88..659cf6ff9 100644 --- a/examples/dual/host_info_to_device_cdc/Makefile +++ b/examples/dual/host_info_to_device_cdc/Makefile @@ -2,11 +2,11 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) CFLAGS_GCC += -Wno-error=cast-align -Wno-error=null-dereference @@ -14,4 +14,4 @@ SRC_C += \ src/host/hub.c \ src/host/usbh.c -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile index e6408c77a..f8292385e 100644 --- a/examples/host/bare_api/Makefile +++ b/examples/host/bare_api/Makefile @@ -2,12 +2,12 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += \ src/main.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile index b6036fa26..d72e91e74 100644 --- a/examples/host/cdc_msc_hid/Makefile +++ b/examples/host/cdc_msc_hid/Makefile @@ -2,7 +2,7 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE = \ @@ -11,6 +11,6 @@ EXAMPLE_SOURCE = \ src/main.c \ src/msc_app.c \ -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile index 4e8c8b116..2e323ed56 100644 --- a/examples/host/cdc_msc_hid_freertos/Makefile +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -3,7 +3,7 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE = \ @@ -12,6 +12,6 @@ EXAMPLE_SOURCE = \ src/main.c \ src/msc_app.c \ -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/host/device_info/Makefile b/examples/host/device_info/Makefile index e6408c77a..f8292385e 100644 --- a/examples/host/device_info/Makefile +++ b/examples/host/device_info/Makefile @@ -2,12 +2,12 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += \ src/main.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/host/hid_controller/Makefile b/examples/host/hid_controller/Makefile index f82054e8c..732520c63 100644 --- a/examples/host/hid_controller/Makefile +++ b/examples/host/hid_controller/Makefile @@ -2,13 +2,13 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += \ src/hid_app.c \ src/main.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/host/midi_rx/Makefile b/examples/host/midi_rx/Makefile index e6408c77a..f8292385e 100644 --- a/examples/host/midi_rx/Makefile +++ b/examples/host/midi_rx/Makefile @@ -2,12 +2,12 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += \ src/main.c -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile index 0f87d848d..39d00d982 100644 --- a/examples/host/msc_file_explorer/Makefile +++ b/examples/host/msc_file_explorer/Makefile @@ -4,7 +4,6 @@ FATFS_PATH = lib/fatfs/source INC += \ src \ - $(TOP)/hw \ $(TOP)/$(FATFS_PATH) \ $(TOP)/lib/embedded-cli \ @@ -13,7 +12,7 @@ EXAMPLE_SOURCE = \ src/main.c \ src/msc_app.c \ -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) # FatFS source SRC_C += \ @@ -24,4 +23,4 @@ SRC_C += \ # suppress warning caused by fatfs CFLAGS_GCC += -Wno-error=cast-qual -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/typec/power_delivery/Makefile b/examples/typec/power_delivery/Makefile index e8cacd359..7f65c689a 100644 --- a/examples/typec/power_delivery/Makefile +++ b/examples/typec/power_delivery/Makefile @@ -2,10 +2,12 @@ include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source -EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +EXAMPLE_SOURCE += \ + src/main.c + +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/hw/bsp/family_rules.mk b/hw/bsp/family_rules.mk new file mode 100644 index 000000000..ccf49dd0e --- /dev/null +++ b/hw/bsp/family_rules.mk @@ -0,0 +1,177 @@ +# --------------------------------------- +# Common make rules for all examples +# --------------------------------------- + +# Set all as default goal +.DEFAULT_GOAL := all + +# ---------------- GNU Make Start ----------------------- +# ESP32-Sx and RP2040 has its own CMake build system +ifeq (,$(findstring $(FAMILY),espressif rp2040)) + +# --------------------------------------- +# Rules +# --------------------------------------- + +all: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex size + +uf2: $(BUILD)/$(PROJECT).uf2 + +# We set vpath to point to the top of the tree so that the source files +# can be located. By following this scheme, it allows a single build rule +# to be used to compile all .c files. +vpath %.c . $(TOP) +vpath %.s . $(TOP) +vpath %.S . $(TOP) + +include ${TOP}/examples/build_system/make/toolchain/$(TOOLCHAIN)_rules.mk + +# --------------------------------------- +# Compiler Flags +# --------------------------------------- + +CFLAGS += $(addprefix -I,$(INC)) + +# Verbose mode +ifeq ("$(V)","1") +$(info CFLAGS $(CFLAGS) ) $(info ) +$(info LDFLAGS $(LDFLAGS)) $(info ) +$(info ASFLAGS $(ASFLAGS)) $(info ) +endif + + +OBJ_DIRS = $(sort $(dir $(OBJ))) +$(OBJ): | $(OBJ_DIRS) +$(OBJ_DIRS): +ifeq ($(CMDEXE),1) + -@$(MKDIR) $(subst /,\,$@) +else + @$(MKDIR) -p $@ +endif + +# UF2 generation, iMXRT need to strip to text only before conversion +ifneq ($(FAMILY),imxrt) +$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).hex + @echo CREATE $@ + $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -c -o $@ $^ +endif + +copy-artifact: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex $(BUILD)/$(PROJECT).uf2 + +endif +# ---------------- GNU Make End ----------------------- + +.PHONY: clean +clean: +ifeq ($(CMDEXE),1) + rd /S /Q $(subst /,\,$(BUILD)) +else + $(RM) -rf $(BUILD) +endif + +# get depenecies +.PHONY: get-deps +get-deps: + $(PYTHON) $(TOP)/tools/get_deps.py ${FAMILY} + +.PHONY: size +size: $(BUILD)/$(PROJECT).elf + -@echo '' + @$(SIZE) $< + -@echo '' + +# linkermap must be install previously at https://github.com/hathach/linkermap +linkermap: $(BUILD)/$(PROJECT).elf + @linkermap -v $<.map + +# --------------------------------------- +# Flash Targets +# --------------------------------------- + +# --------------- Jlink ----------------- +ifeq ($(OS),Windows_NT) + JLINKEXE = JLink.exe +else + JLINKEXE = JLinkExe +endif + +# Jlink Interface +JLINK_IF ?= swd + +# Jlink script +$(BUILD)/$(BOARD).jlink: $(BUILD)/$(PROJECT).hex + @echo halt > $@ + @echo loadfile $^ >> $@ + @echo r >> $@ + @echo go >> $@ + @echo exit >> $@ + +# Flash using jlink +flash-jlink: $(BUILD)/$(BOARD).jlink + $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $< + +# --------------- stm32 cube programmer ----------------- +# Flash STM32 MCU using stlink with STM32 Cube Programmer CLI +flash-stlink: $(BUILD)/$(PROJECT).elf + STM32_Programmer_CLI --connect port=swd --write $< --go + +# --------------- xfel ----------------- +$(BUILD)/$(PROJECT)-sunxi.bin: $(BUILD)/$(PROJECT).bin + $(PYTHON) $(TOP)/tools/mksunxi.py $< $@ + +flash-xfel: $(BUILD)/$(PROJECT)-sunxi.bin + xfel spinor write 0 $< + xfel reset + +# --------------- pyocd ----------------- +PYOCD_OPTION ?= +flash-pyocd: $(BUILD)/$(PROJECT).hex + pyocd flash -t $(PYOCD_TARGET) $(PYOCD_OPTION) $< + #pyocd reset -t $(PYOCD_TARGET) + +# --------------- openocd ----------------- +OPENOCD_OPTION ?= +flash-openocd: $(BUILD)/$(PROJECT).elf + openocd $(OPENOCD_OPTION) -c "program $< verify reset exit" + +# --------------- openocd-wch ----------------- +# wch-linke is not supported yet in official openOCD yet. We need to either use +# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or +# 2. compiled from https://github.com/hathach/riscv-openocd-wch or +# https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz +# with ./configure --disable-werror --enable-wlinke --enable-ch347=no +OPENOCD_WCH ?= /home/${USER}/app/riscv-openocd-wch/src/openocd +OPENOCD_WCH_OPTION ?= +flash-openocd-wch: $(BUILD)/$(PROJECT).elf + $(OPENOCD_WCH) $(OPENOCD_WCH_OPTION) -c init -c halt -c "flash write_image $<" -c reset -c exit + +# --------------- wlink-rs ----------------- +# flash with https://github.com/ch32-rs/wlink +WLINK_RS ?= wlink +flash-wlink-rs: $(BUILD)/$(PROJECT).elf + $(WLINK_RS) flash $< + +# --------------- dfu-util ----------------- +DFU_UTIL_OPTION ?= -a 0 +flash-dfu-util: $(BUILD)/$(PROJECT).bin + dfu-util -R $(DFU_UTIL_OPTION) -D $< + +# --------------- Black Magic ----------------- +# This symlink is created by https://github.com/blacksphere/blackmagic/blob/master/driver/99-blackmagic.rules +BMP ?= /dev/ttyBmpGdb + +flash-bmp: $(BUILD)/$(PROJECT).elf + $(GDB) --batch -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' -ex load $< + +debug-bmp: $(BUILD)/$(PROJECT).elf + $(GDB) -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' $< + +# --------------- TI Uniflash ----------------- +DSLITE ?= dslite.sh +flash-uniflash: $(BUILD)/$(PROJECT).hex + ${DSLITE} ${UNIFLASH_OPTION} -f $< + +# Print out the value of a make variable. +# https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile +print-%: + @echo $* = $($*) diff --git a/hw/bsp/family_support.mk b/hw/bsp/family_support.mk index 757982b85..2e236dc4a 100644 --- a/hw/bsp/family_support.mk +++ b/hw/bsp/family_support.mk @@ -22,7 +22,7 @@ ifndef TOOLCHAIN TOOLCHAIN = gcc endif -#-------------- TOP and CURRENT_PATH ------------ +#-------------- TOP and EXAMPLE_PATH ------------ # Set TOP to be the path to get from the current directory (where make was invoked) to the top of the tree. # $(lastword $(MAKEFILE_LIST)) returns the name of this makefile relative to where make was invoked. @@ -31,8 +31,8 @@ THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) # Set TOP to an absolute path TOP = $(abspath $(subst family_support.mk,../..,$(THIS_MAKEFILE))) -# Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos -CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) +# Set EXAMPLE_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc +EXAMPLE_PATH = $(subst $(TOP)/,,$(abspath .)) #-------------- Linux/Windows ------------ # Detect whether shell style is windows or not @@ -62,7 +62,6 @@ endif BUILD := _build/$(BOARD) PROJECT := $(notdir $(CURDIR)) -BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) #------------------------------------------------------------- # Board / Family @@ -108,6 +107,7 @@ SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c)) INC += \ $(TOP)/$(FAMILY_PATH) \ $(TOP)/src \ + $(TOP)/hw \ BOARD_UPPER = $(call to_upper,$(BOARD)) CFLAGS += -DBOARD_$(BOARD_UPPER) diff --git a/test/fuzz/device/cdc/Makefile b/test/fuzz/device/cdc/Makefile index 7071df057..d448907f0 100644 --- a/test/fuzz/device/cdc/Makefile +++ b/test/fuzz/device/cdc/Makefile @@ -2,10 +2,10 @@ include ../../make.mk INC += \ src \ - $(TOP)/hw \ + # Example source -SRC_C += $(addprefix $(CURRENT_PATH)/, $(wildcard src/*.c)) -SRC_CXX += $(addprefix $(CURRENT_PATH)/, $(wildcard src/*.cc)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(wildcard src/*.c)) +SRC_CXX += $(addprefix $(EXAMPLE_PATH)/, $(wildcard src/*.cc)) include ../../rules.mk diff --git a/test/fuzz/device/msc/Makefile b/test/fuzz/device/msc/Makefile index 7071df057..d448907f0 100644 --- a/test/fuzz/device/msc/Makefile +++ b/test/fuzz/device/msc/Makefile @@ -2,10 +2,10 @@ include ../../make.mk INC += \ src \ - $(TOP)/hw \ + # Example source -SRC_C += $(addprefix $(CURRENT_PATH)/, $(wildcard src/*.c)) -SRC_CXX += $(addprefix $(CURRENT_PATH)/, $(wildcard src/*.cc)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(wildcard src/*.c)) +SRC_CXX += $(addprefix $(EXAMPLE_PATH)/, $(wildcard src/*.cc)) include ../../rules.mk diff --git a/test/fuzz/device/net/Makefile b/test/fuzz/device/net/Makefile index 2161ad3f1..45c684eec 100644 --- a/test/fuzz/device/net/Makefile +++ b/test/fuzz/device/net/Makefile @@ -8,15 +8,14 @@ CFLAGS += \ INC += \ src \ - $(TOP)/hw \ $(TOP)/lib/lwip/src/include \ $(TOP)/lib/lwip/src/include/ipv4 \ $(TOP)/lib/lwip/src/include/lwip/apps \ $(TOP)/lib/networking # Example source -SRC_C += $(addprefix $(CURRENT_PATH)/, $(wildcard src/*.c)) -SRC_CXX += $(addprefix $(CURRENT_PATH)/, $(wildcard src/*.cc)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(wildcard src/*.c)) +SRC_CXX += $(addprefix $(EXAMPLE_PATH)/, $(wildcard src/*.cc)) # lwip sources SRC_C += \ diff --git a/test/fuzz/make.mk b/test/fuzz/make.mk index e9aa80bf1..733a57134 100644 --- a/test/fuzz/make.mk +++ b/test/fuzz/make.mk @@ -2,7 +2,7 @@ # Common make definition for all examples # --------------------------------------- -#-------------- TOP and CURRENT_PATH ------------ +#-------------- TOP and EXAMPLE_PATH ------------ # Set TOP to be the path to get from the current directory (where make was # invoked) to the top of the tree. $(lastword $(MAKEFILE_LIST)) returns @@ -13,8 +13,8 @@ THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) # and Set TOP to an absolute path TOP = $(abspath $(subst make.mk,../..,$(THIS_MAKEFILE))) -# Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos -CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) +# Set EXAMPLE_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos +EXAMPLE_PATH = $(subst $(TOP)/,,$(abspath .)) # Detect whether shell style is windows or not # https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 -- cgit v1.3.1 From 4bdd08ed2dacaf22ce2a442f8e13c97b03dfc2cb Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 14 Oct 2025 19:41:04 +0700 Subject: fix missing prototypes --- hw/bsp/at32f402_405/at32f402_405_int.h | 6 ++++++ hw/bsp/at32f402_405/family.c | 15 +++++++-------- hw/bsp/at32f403a_407/at32f403a_407_int.h | 6 ++++++ hw/bsp/at32f403a_407/family.c | 2 ++ hw/bsp/at32f413/at32f413_int.h | 6 ++++++ hw/bsp/at32f413/family.c | 2 ++ hw/bsp/at32f415/at32f415_int.h | 3 +++ hw/bsp/at32f415/family.c | 2 ++ hw/bsp/at32f423/at32f423_int.h | 3 +++ hw/bsp/at32f423/family.c | 2 ++ hw/bsp/at32f425/at32f425_int.h | 3 +++ hw/bsp/at32f425/family.c | 2 ++ hw/bsp/at32f435_437/at32f435_437_int.h | 5 +++++ hw/bsp/at32f435_437/family.c | 2 ++ hw/bsp/nrf/family.c | 2 -- hw/bsp/nrf/family.cmake | 11 ++++++++--- 16 files changed, 59 insertions(+), 13 deletions(-) diff --git a/hw/bsp/at32f402_405/at32f402_405_int.h b/hw/bsp/at32f402_405/at32f402_405_int.h index 207a7d6df..82f924b61 100644 --- a/hw/bsp/at32f402_405/at32f402_405_int.h +++ b/hw/bsp/at32f402_405/at32f402_405_int.h @@ -48,6 +48,12 @@ void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); +void OTGFS1_IRQHandler(void); +void OTGHS_IRQHandler(void); +void OTGFS1_WKUP_IRQHandler(void); +void OTGHS_WKUP_IRQHandler(void); + + #ifdef __cplusplus } #endif diff --git a/hw/bsp/at32f402_405/family.c b/hw/bsp/at32f402_405/family.c index cb5987cd4..6f3196744 100644 --- a/hw/bsp/at32f402_405/family.c +++ b/hw/bsp/at32f402_405/family.c @@ -29,6 +29,8 @@ */ #include "at32f402_405_clock.h" +#include "at32f402_405_int.h" +#include "at32f403a_407_usb.h" #include "bsp/board_api.h" #include "board.h" @@ -40,20 +42,16 @@ void usb_gpio_config(void); //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void OTGFS1_IRQHandler(void) -{ +void OTGFS1_IRQHandler(void) { tusb_int_handler(0, true); } -void OTGHS_IRQHandler(void) -{ +void OTGHS_IRQHandler(void) { tusb_int_handler(1, true); } -void OTGFS1_WKUP_IRQHandler(void) -{ +void OTGFS1_WKUP_IRQHandler(void) { tusb_int_handler(0, true); } -void OTGHS_WKUP_IRQHandler(void) -{ +void OTGHS_WKUP_IRQHandler(void) { tusb_int_handler(1, true); } @@ -278,6 +276,7 @@ void HardFault_Handler(void) { // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. +void _init(void); void _init(void) { } diff --git a/hw/bsp/at32f403a_407/at32f403a_407_int.h b/hw/bsp/at32f403a_407/at32f403a_407_int.h index 6d85c70ca..242a4abe1 100644 --- a/hw/bsp/at32f403a_407/at32f403a_407_int.h +++ b/hw/bsp/at32f403a_407/at32f403a_407_int.h @@ -48,6 +48,12 @@ void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); +void USBFS_H_CAN1_TX_IRQHandler(void); +void USBFS_L_CAN1_RX0_IRQHandler(void); +void USBFS_MAPH_IRQHandler(void); +void USBFS_MAPL_IRQHandler(void); +void USBFSWakeUp_IRQHandler(void); + #ifdef __cplusplus } #endif diff --git a/hw/bsp/at32f403a_407/family.c b/hw/bsp/at32f403a_407/family.c index 8c8329323..dd9b85dc5 100644 --- a/hw/bsp/at32f403a_407/family.c +++ b/hw/bsp/at32f403a_407/family.c @@ -29,6 +29,7 @@ */ #include "at32f403a_407_clock.h" +#include "at32f403a_407_int.h" #include "bsp/board_api.h" #include "board.h" @@ -266,6 +267,7 @@ void HardFault_Handler(void) { // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. +void _init(void); void _init(void) { } diff --git a/hw/bsp/at32f413/at32f413_int.h b/hw/bsp/at32f413/at32f413_int.h index fbbf30dbc..46ce271e5 100644 --- a/hw/bsp/at32f413/at32f413_int.h +++ b/hw/bsp/at32f413/at32f413_int.h @@ -48,6 +48,12 @@ void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); +void USBFS_H_CAN1_TX_IRQHandler(void); +void USBFS_L_CAN1_RX0_IRQHandler(void); +void USBFS_MAPH_IRQHandler(void); +void USBFS_MAPL_IRQHandler(void); +void USBFSWakeUp_IRQHandler(void); + #ifdef __cplusplus } #endif diff --git a/hw/bsp/at32f413/family.c b/hw/bsp/at32f413/family.c index bb16d4d5b..bdaed523c 100644 --- a/hw/bsp/at32f413/family.c +++ b/hw/bsp/at32f413/family.c @@ -29,6 +29,7 @@ */ #include "at32f413_clock.h" +#include "at32f413_int.h" #include "board.h" #include "bsp/board_api.h" @@ -266,6 +267,7 @@ void HardFault_Handler(void) { // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. +void _init(void); void _init(void) { } diff --git a/hw/bsp/at32f415/at32f415_int.h b/hw/bsp/at32f415/at32f415_int.h index 2106538b6..c6df83835 100644 --- a/hw/bsp/at32f415/at32f415_int.h +++ b/hw/bsp/at32f415/at32f415_int.h @@ -48,6 +48,9 @@ void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); +void OTGFS1_IRQHandler(void); +void OTGFS1_WKUP_IRQHandler(void); + #ifdef __cplusplus } #endif diff --git a/hw/bsp/at32f415/family.c b/hw/bsp/at32f415/family.c index 381b79eeb..2fbd4c821 100644 --- a/hw/bsp/at32f415/family.c +++ b/hw/bsp/at32f415/family.c @@ -29,6 +29,7 @@ */ #include "at32f415_clock.h" +#include "at32f415_int.h" #include "board.h" #include "bsp/board_api.h" @@ -262,6 +263,7 @@ void HardFault_Handler(void) { // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. +void _init(void); void _init(void) { } diff --git a/hw/bsp/at32f423/at32f423_int.h b/hw/bsp/at32f423/at32f423_int.h index 28550331e..bf73ae6c0 100644 --- a/hw/bsp/at32f423/at32f423_int.h +++ b/hw/bsp/at32f423/at32f423_int.h @@ -48,6 +48,9 @@ void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); +void OTGFS1_IRQHandler(void); +void OTGFS1_WKUP_IRQHandler(void); + #ifdef __cplusplus } #endif diff --git a/hw/bsp/at32f423/family.c b/hw/bsp/at32f423/family.c index 723a8a2c9..f30c6a83f 100644 --- a/hw/bsp/at32f423/family.c +++ b/hw/bsp/at32f423/family.c @@ -29,6 +29,7 @@ */ #include "at32f423_clock.h" +#include "at32f423_int.h" #include "board.h" #include "bsp/board_api.h" @@ -266,6 +267,7 @@ void HardFault_Handler(void) { // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. +void _init(void); void _init(void) { } diff --git a/hw/bsp/at32f425/at32f425_int.h b/hw/bsp/at32f425/at32f425_int.h index ad9dc308b..56bb52d87 100644 --- a/hw/bsp/at32f425/at32f425_int.h +++ b/hw/bsp/at32f425/at32f425_int.h @@ -48,6 +48,9 @@ void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); +void OTGFS1_IRQHandler(void); +void OTGFS1_WKUP_IRQHandler(void); + #ifdef __cplusplus } #endif diff --git a/hw/bsp/at32f425/family.c b/hw/bsp/at32f425/family.c index 963e1485f..4ff4c8d6a 100644 --- a/hw/bsp/at32f425/family.c +++ b/hw/bsp/at32f425/family.c @@ -29,6 +29,7 @@ */ #include "at32f425_clock.h" +#include "at32f425_int.h" #include "board.h" #include "bsp/board_api.h" @@ -270,6 +271,7 @@ void HardFault_Handler(void) { // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. +void _init(void); void _init(void) { } diff --git a/hw/bsp/at32f435_437/at32f435_437_int.h b/hw/bsp/at32f435_437/at32f435_437_int.h index 76bfaaae4..1fa34419f 100644 --- a/hw/bsp/at32f435_437/at32f435_437_int.h +++ b/hw/bsp/at32f435_437/at32f435_437_int.h @@ -48,6 +48,11 @@ void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); +void OTGFS1_IRQHandler(void); +void OTGFS2_IRQHandler(void); +void OTGFS1_WKUP_IRQHandler(void); +void OTGFS2_WKUP_IRQHandler(void); + #ifdef __cplusplus } #endif diff --git a/hw/bsp/at32f435_437/family.c b/hw/bsp/at32f435_437/family.c index a65116729..4bd6ee73c 100644 --- a/hw/bsp/at32f435_437/family.c +++ b/hw/bsp/at32f435_437/family.c @@ -29,6 +29,7 @@ */ #include "at32f435_437_clock.h" +#include "at32f435_437_int.h" #include "board.h" #include "bsp/board_api.h" @@ -332,6 +333,7 @@ void HardFault_Handler(void) { // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. +void _init(void); void _init(void) { } diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 0221da083..25062b18f 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -108,8 +108,6 @@ void USBD_IRQHandler(void) { #endif - - // tinyusb function that handles power event (detected, ready, removed) // We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. extern void tusb_hal_nrf_power_event(uint32_t event); diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 8cebcbedd..cc2b7a2e5 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -46,13 +46,13 @@ function(add_board_target BOARD_TARGET) if (MCU_VARIANT STREQUAL nrf54h20) set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa_application.ld) - target_sources(${BOARD_TARGET} PUBLIC + target_sources(${BOARD_TARGET} PRIVATE ${NRFX_PATH}/mdk/system_nrf54h.c ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}_application.S ) elseif (MCU_VARIANT STREQUAL nrf5340) set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa_application.ld) - target_sources(${BOARD_TARGET} PUBLIC + target_sources(${BOARD_TARGET} PRIVATE ${NRFX_PATH}/mdk/system_${MCU_VARIANT}_application.c ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}_application.S ${NRFX_PATH}/drivers/src/nrfx_usbreg.c @@ -60,7 +60,7 @@ function(add_board_target BOARD_TARGET) target_compile_definitions(${BOARD_TARGET} PUBLIC NRF5340_XXAA_APPLICATION) else() set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) - target_sources(${BOARD_TARGET} PUBLIC + target_sources(${BOARD_TARGET} PRIVATE ${NRFX_PATH}/mdk/system_${MCU_VARIANT}.c ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}.S ) @@ -141,6 +141,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} -- cgit v1.3.1 From 367044e4873fc9ca9cdac918cee684e1e08216e0 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 14 Oct 2025 20:51:49 +0700 Subject: fix lots of warnings for missing-prototypes for irqhandler --- examples/host/msc_file_explorer/CMakeLists.txt | 4 +--- hw/bsp/at32f402_405/family.c | 1 - hw/bsp/at32f423/at32f423_int.h | 2 +- hw/bsp/broadcom_32bit/family.cmake | 4 ++++ hw/bsp/broadcom_64bit/family.cmake | 4 ++++ hw/bsp/ch32f20x/ch32f20x_it.h | 12 +++++++----- hw/bsp/ch32f20x/family.c | 1 + hw/bsp/ch32v10x/ch32v10x_it.h | 14 ++++++++++++++ hw/bsp/ch32v10x/family.c | 3 ++- hw/bsp/ch32v20x/ch32v20x_it.h | 17 +++++++++++++++++ hw/bsp/ch32v20x/family.c | 3 ++- hw/bsp/ch32v30x/ch32v30x_it.h | 14 +++++++++++++- hw/bsp/ch32v30x/debug_uart.c | 3 ++- hw/bsp/ch32v30x/family.c | 3 ++- hw/bsp/da1469x/family.cmake | 5 +++++ hw/bsp/fomu/family.c | 1 - hw/bsp/fomu/family.cmake | 4 ++++ hw/bsp/gd32vf103/family.cmake | 12 ++++++++++++ hw/bsp/imxrt/family.cmake | 5 ++++- hw/bsp/kinetis_k/family.cmake | 4 ++++ hw/bsp/kinetis_k32l2/family.cmake | 4 ++++ hw/bsp/kinetis_kl/family.cmake | 4 ++++ hw/bsp/lpc13/family.cmake | 5 +++++ hw/bsp/lpc15/family.cmake | 5 +++++ hw/bsp/lpc17/family.cmake | 5 +++++ hw/bsp/lpc40/family.cmake | 5 +++++ hw/bsp/lpc51/family.cmake | 4 ++++ hw/bsp/lpc54/family.cmake | 4 ++++ hw/bsp/lpc55/family.cmake | 9 +++++---- hw/bsp/maxim/family.c | 2 ++ hw/bsp/maxim/family.cmake | 4 ++++ hw/bsp/mcx/family.cmake | 4 ++++ hw/bsp/mm32/family.cmake | 4 ++++ hw/bsp/msp430/family.c | 9 +++++---- hw/bsp/msp432e4/family.cmake | 5 +++++ hw/bsp/nrf/family.cmake | 1 - hw/bsp/ra/family.cmake | 5 +++++ hw/bsp/samd11/family.c | 5 ++--- hw/bsp/samg/family.c | 1 + hw/bsp/saml2x/family.c | 1 + hw/bsp/stm32c0/family.cmake | 5 +++++ hw/bsp/stm32f0/family.cmake | 5 +++++ hw/bsp/stm32f1/family.cmake | 5 +++++ hw/bsp/stm32f2/family.cmake | 5 +++++ hw/bsp/stm32f3/family.cmake | 5 +++++ hw/bsp/stm32f4/family.cmake | 5 +++++ hw/bsp/stm32f7/family.cmake | 5 +++++ hw/bsp/stm32g0/family.cmake | 5 +++++ hw/bsp/stm32g4/family.cmake | 5 +++++ hw/bsp/stm32h5/family.cmake | 5 +++++ hw/bsp/stm32h7/family.cmake | 5 +++++ hw/bsp/stm32h7rs/family.cmake | 5 +++++ hw/bsp/stm32l0/family.cmake | 5 +++++ hw/bsp/stm32l4/family.cmake | 5 +++++ hw/bsp/stm32n6/boards/stm32n6570dk/board.h | 10 +++++----- hw/bsp/stm32n6/boards/stm32n657nucleo/board.h | 2 +- hw/bsp/stm32n6/family.cmake | 8 +++++++- hw/bsp/stm32u0/family.cmake | 5 +++++ hw/bsp/stm32u5/family.cmake | 5 +++++ hw/bsp/stm32wb/family.cmake | 5 +++++ hw/bsp/stm32wba/family.cmake | 5 +++++ hw/bsp/tm4c/family.cmake | 4 ++++ hw/bsp/xmc4000/family.cmake | 4 ++++ src/portable/mentor/musb/musb_max32.h | 10 ++++++++++ src/portable/sunxi/dcd_sunxi_musb.c | 4 ++-- src/portable/synopsys/dwc2/dcd_dwc2.c | 1 + src/portable/wch/hcd_ch32_usbfs.c | 10 ++++++++++ tools/get_deps.py | 6 +++--- 68 files changed, 310 insertions(+), 41 deletions(-) diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index 95d532fc9..e9c15b7c1 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -28,9 +28,7 @@ target_sources(${PROJECT} PUBLIC # Suppress warnings on fatfs if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties( - ${TOP}/lib/fatfs/source/ff.c - PROPERTIES + set_source_files_properties(${TOP}/lib/fatfs/source/ff.c PROPERTIES COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual" ) endif () diff --git a/hw/bsp/at32f402_405/family.c b/hw/bsp/at32f402_405/family.c index 6f3196744..beac1a7f8 100644 --- a/hw/bsp/at32f402_405/family.c +++ b/hw/bsp/at32f402_405/family.c @@ -30,7 +30,6 @@ #include "at32f402_405_clock.h" #include "at32f402_405_int.h" -#include "at32f403a_407_usb.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/at32f423/at32f423_int.h b/hw/bsp/at32f423/at32f423_int.h index bf73ae6c0..aa707346d 100644 --- a/hw/bsp/at32f423/at32f423_int.h +++ b/hw/bsp/at32f423/at32f423_int.h @@ -39,7 +39,7 @@ extern "C" { /* exported functions ------------------------------------------------------- */ void NMI_Handler(void); -//void HardFault_Handler(void); +void HardFault_Handler(void); void MemManage_Handler(void); void BusFault_Handler(void); void UsageFault_Handler(void); diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake index 5e57d8b1e..1ec54b06f 100644 --- a/hw/bsp/broadcom_32bit/family.cmake +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -86,6 +86,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake index 1a088c2c0..e87aaa3a4 100644 --- a/hw/bsp/broadcom_64bit/family.cmake +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -93,6 +93,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/ch32f20x/ch32f20x_it.h b/hw/bsp/ch32f20x/ch32f20x_it.h index 34f3bbf96..7daf0d76e 100644 --- a/hw/bsp/ch32f20x/ch32f20x_it.h +++ b/hw/bsp/ch32f20x/ch32f20x_it.h @@ -1,9 +1,9 @@ /********************************** (C) COPYRIGHT ******************************* -* File Name : ch32f20x_it.h -* Author : WCH -* Version : V1.0.0 -* Date : 2021/08/08 -* Description : This file contains the headers of the interrupt handlers. + * File Name : ch32f20x_it.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/08/08 + * Description : This file contains the headers of the interrupt handlers. ********************************************************************************* * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * Attention: This software (modified or not) and binary are used for @@ -21,5 +21,7 @@ void BusFault_Handler(void); void UsageFault_Handler(void); void DebugMon_Handler(void); +void USBHS_IRQHandler(void); +void SysTick_Handler(void); #endif /* __CH32F20xIT_H */ diff --git a/hw/bsp/ch32f20x/family.c b/hw/bsp/ch32f20x/family.c index 7fef71d47..7eae62fa4 100644 --- a/hw/bsp/ch32f20x/family.c +++ b/hw/bsp/ch32f20x/family.c @@ -32,6 +32,7 @@ #include "debug_uart.h" #include "ch32f20x.h" +#include "ch32f20x_it.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/ch32v10x/ch32v10x_it.h b/hw/bsp/ch32v10x/ch32v10x_it.h index 13afc2412..34615bb69 100644 --- a/hw/bsp/ch32v10x/ch32v10x_it.h +++ b/hw/bsp/ch32v10x/ch32v10x_it.h @@ -12,4 +12,18 @@ #ifndef __CH32V10x_IT_H #define __CH32V10x_IT_H +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v10x.h" + +void USBHD_IRQHandler(void); +void USBWakeUp_IRQHandler(void); +void SysTick_Handler(void); + +#ifdef __cplusplus +} +#endif + #endif /* __CH32V10x_IT_H */ diff --git a/hw/bsp/ch32v10x/family.c b/hw/bsp/ch32v10x/family.c index f25102494..dfc041462 100644 --- a/hw/bsp/ch32v10x/family.c +++ b/hw/bsp/ch32v10x/family.c @@ -12,6 +12,7 @@ #endif #include "ch32v10x.h" +#include "ch32v10x_it.h" #ifdef __GNUC__ #pragma GCC diagnostic pop @@ -44,7 +45,7 @@ void SysTick_Handler(void) { system_ticks++; } -uint32_t SysTick_Config(uint32_t ticks) { +static uint32_t SysTick_Config(uint32_t ticks) { NVIC_EnableIRQ(SysTicK_IRQn); SysTick->CTLR = 0; SysTick->CNTL0 = SysTick->CNTL1 = SysTick->CNTL2 = SysTick->CNTL3 = 0; diff --git a/hw/bsp/ch32v20x/ch32v20x_it.h b/hw/bsp/ch32v20x/ch32v20x_it.h index e49c61ae2..d1e8db255 100644 --- a/hw/bsp/ch32v20x/ch32v20x_it.h +++ b/hw/bsp/ch32v20x/ch32v20x_it.h @@ -12,4 +12,21 @@ #ifndef __CH32V20x_IT_H #define __CH32V20x_IT_H +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v20x.h" + +void USB_LP_CAN1_RX0_IRQHandler(void); +void USB_HP_CAN1_TX_IRQHandler(void); +void USBWakeUp_IRQHandler(void); +void USBHD_IRQHandler(void); +void USBHDWakeUp_IRQHandler(void); +void SysTick_Handler(void); + +#ifdef __cplusplus +} +#endif + #endif /* __CH32V20x_IT_H */ diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c index 510f82981..690acee1e 100644 --- a/hw/bsp/ch32v20x/family.c +++ b/hw/bsp/ch32v20x/family.c @@ -12,6 +12,7 @@ manufacturer: WCH #endif #include "ch32v20x.h" +#include "ch32v20x_it.h" #ifdef __GNUC__ #pragma GCC diagnostic pop @@ -74,7 +75,7 @@ __attribute__((interrupt)) void SysTick_Handler(void) { system_ticks++; } -uint32_t SysTick_Config(uint32_t ticks) { +static uint32_t SysTick_Config(uint32_t ticks) { NVIC_EnableIRQ(SysTicK_IRQn); SysTick->CTLR = 0; SysTick->SR = 0; diff --git a/hw/bsp/ch32v30x/ch32v30x_it.h b/hw/bsp/ch32v30x/ch32v30x_it.h index f3977a8be..b9bf0b82e 100644 --- a/hw/bsp/ch32v30x/ch32v30x_it.h +++ b/hw/bsp/ch32v30x/ch32v30x_it.h @@ -10,7 +10,19 @@ #ifndef __CH32V30x_IT_H #define __CH32V30x_IT_H -// #include "debug.h" +#ifdef __cplusplus +extern "C" { +#endif + +#include "ch32v30x.h" + +void USBHS_IRQHandler(void); +void OTG_FS_IRQHandler(void); +void SysTick_Handler(void); + +#ifdef __cplusplus +} +#endif #endif /* __CH32V30x_IT_H */ diff --git a/hw/bsp/ch32v30x/debug_uart.c b/hw/bsp/ch32v30x/debug_uart.c index 2fd3a9d64..4d2992c58 100644 --- a/hw/bsp/ch32v30x/debug_uart.c +++ b/hw/bsp/ch32v30x/debug_uart.c @@ -49,7 +49,8 @@ void USART1_IRQHandler(void) { __asm volatile ("call USART1_IRQHandler_impl; mret"); } -__attribute__((used)) void USART1_IRQHandler_impl(void) +void USART1_IRQHandler_impl(void) __attribute__((used)) ; +void USART1_IRQHandler_impl(void) { if(USART_GetITStatus(USART1, USART_IT_TC) != RESET) { diff --git a/hw/bsp/ch32v30x/family.c b/hw/bsp/ch32v30x/family.c index bd01f4f46..c694f1a08 100644 --- a/hw/bsp/ch32v30x/family.c +++ b/hw/bsp/ch32v30x/family.c @@ -40,6 +40,7 @@ #include "debug_uart.h" #include "ch32v30x.h" +#include "ch32v30x_it.h" #ifdef __GNUC__ #pragma GCC diagnostic pop @@ -70,7 +71,7 @@ __attribute__((interrupt)) void OTG_FS_IRQHandler(void) { // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -uint32_t SysTick_Config(uint32_t ticks) { +static uint32_t SysTick_Config(uint32_t ticks) { NVIC_EnableIRQ(SysTicK_IRQn); SysTick->CTLR = 0; SysTick->SR = 0; diff --git a/hw/bsp/da1469x/family.cmake b/hw/bsp/da1469x/family.cmake index 20d6cbc44..b5bec52c8 100644 --- a/hw/bsp/da1469x/family.cmake +++ b/hw/bsp/da1469x/family.cmake @@ -118,6 +118,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/fomu/family.c b/hw/bsp/fomu/family.c index 61943cb01..9d7977bea 100644 --- a/hw/bsp/fomu/family.c +++ b/hw/bsp/fomu/family.c @@ -38,7 +38,6 @@ //--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ - void fomu_error(uint32_t line) { (void)line; diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake index 639373695..0c7eae90e 100644 --- a/hw/bsp/fomu/family.cmake +++ b/hw/bsp/fomu/family.cmake @@ -69,6 +69,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake index a47871b38..4f5a945e8 100644 --- a/hw/bsp/gd32vf103/family.cmake +++ b/hw/bsp/gd32vf103/family.cmake @@ -97,6 +97,18 @@ function(family_configure_example TARGET RTOS) ${SOC_DIR}/Common/Source/Stubs/lseek.c ${SOC_DIR}/Common/Source/Stubs/read.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties( + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${SOC_DIR}/Common/Source/Stubs/sbrk.c + ${SOC_DIR}/Common/Source/Stubs/close.c + ${SOC_DIR}/Common/Source/Stubs/isatty.c + ${SOC_DIR}/Common/Source/Stubs/fstat.c + ${SOC_DIR}/Common/Source/Stubs/lseek.c + ${SOC_DIR}/Common/Source/Stubs/read.c + PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index feec4973f..37acab06d 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -122,10 +122,13 @@ function(family_configure_example TARGET RTOS) add_board_target(board_${BOARD}) target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake index ce91777c9..426004b4e 100644 --- a/hw/bsp/kinetis_k/family.cmake +++ b/hw/bsp/kinetis_k/family.cmake @@ -89,6 +89,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake index 946614a03..8e1b25a95 100644 --- a/hw/bsp/kinetis_k32l2/family.cmake +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -84,6 +84,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 51a646258..335e67375 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -88,6 +88,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/lpc13/family.cmake b/hw/bsp/lpc13/family.cmake index e3c0b18c7..4ced216cb 100644 --- a/hw/bsp/lpc13/family.cmake +++ b/hw/bsp/lpc13/family.cmake @@ -79,6 +79,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/lpc15/family.cmake b/hw/bsp/lpc15/family.cmake index 761c5a619..f07044c24 100644 --- a/hw/bsp/lpc15/family.cmake +++ b/hw/bsp/lpc15/family.cmake @@ -81,6 +81,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/lpc17/family.cmake b/hw/bsp/lpc17/family.cmake index 771a0f405..2cbb261ca 100644 --- a/hw/bsp/lpc17/family.cmake +++ b/hw/bsp/lpc17/family.cmake @@ -78,6 +78,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index 3a680eae6..21ed18057 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -79,6 +79,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index 09d97d256..615fab6b8 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -98,6 +98,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index 66320870a..3a0de4648 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -126,6 +126,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + # https://github.com/gsteiert/sct_neopixel/pull/1 if (CMAKE_C_COMPILER_ID STREQUAL "GNU") set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c PROPERTIES diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index a89548635..08c186ca1 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -126,10 +126,11 @@ function(family_configure_example TARGET RTOS) ${TOP}/lib/sct_neopixel/sct_neopixel.c ) - # https://github.com/gsteiert/sct_neopixel/pull/1 - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c PROPERTIES - COMPILE_FLAGS "-Wno-unused-parameter") + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c + PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes -Wno-unused-parameter") endif () target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/maxim/family.c b/hw/bsp/maxim/family.c index 0ef6b8c4d..92b5adb6d 100644 --- a/hw/bsp/maxim/family.c +++ b/hw/bsp/maxim/family.c @@ -31,6 +31,7 @@ #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() +#pragma GCC diagnostic ignored "-Wredundant-decls" #endif #include "gpio.h" @@ -154,6 +155,7 @@ uint32_t board_button_read(void) { size_t board_get_unique_id(uint8_t id[], size_t max_len) { #if defined(MAX32650) // USN is 13 bytes on this device + (void) max_len; MXC_SYS_GetUSN(id, 13); return 13; #else diff --git a/hw/bsp/maxim/family.cmake b/hw/bsp/maxim/family.cmake index 75daec753..e4b1b2c46 100644 --- a/hw/bsp/maxim/family.cmake +++ b/hw/bsp/maxim/family.cmake @@ -160,6 +160,10 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + # Board target add_board_target(board_${BOARD}) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index f857ed31a..a8f50773d 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -105,6 +105,10 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + # Board target add_board_target(board_${BOARD}) diff --git a/hw/bsp/mm32/family.cmake b/hw/bsp/mm32/family.cmake index 0561a63a0..d5e62a2da 100644 --- a/hw/bsp/mm32/family.cmake +++ b/hw/bsp/mm32/family.cmake @@ -79,6 +79,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/msp430/family.c b/hw/bsp/msp430/family.c index a45bd5f93..390a9915e 100644 --- a/hw/bsp/msp430/family.c +++ b/hw/bsp/msp430/family.c @@ -35,8 +35,8 @@ //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void __attribute__ ((interrupt(USB_UBM_VECTOR))) USB_UBM_ISR(void) -{ +void USB_UBM_ISR(void) __attribute__ ((interrupt(USB_UBM_VECTOR))); +void USB_UBM_ISR(void) { tud_int_handler(0); } @@ -200,8 +200,9 @@ int board_uart_write(void const * buf, int len) #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; -void __attribute__ ((interrupt(TIMER0_A0_VECTOR))) TIMER0_A0_ISR (void) -{ + +void TIMER0_A0_ISR (void) __attribute__ ((interrupt(TIMER0_A0_VECTOR))); +void TIMER0_A0_ISR (void) { system_ticks++; // TAxCCR0 CCIFG resets itself as soon as interrupt is invoked. } diff --git a/hw/bsp/msp432e4/family.cmake b/hw/bsp/msp432e4/family.cmake index f6939ecfe..62ab83866 100644 --- a/hw/bsp/msp432e4/family.cmake +++ b/hw/bsp/msp432e4/family.cmake @@ -77,6 +77,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index cc2b7a2e5..3384aeaf3 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -141,7 +141,6 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 42a32631c..bf6bcfb4a 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -127,6 +127,11 @@ function(family_configure_example TARGET RTOS) # Explicitly added bsp_rom_registers here, otherwise MCU can be bricked if g_bsp_rom_registers is dropped by linker ${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c PROPERTIES COMPILE_FLAGS "-Wno-undef") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/samd11/family.c b/hw/bsp/samd11/family.c index 79ca9de02..62e060c8e 100644 --- a/hw/bsp/samd11/family.c +++ b/hw/bsp/samd11/family.c @@ -155,12 +155,11 @@ uint32_t board_millis(void) return system_ticks; } -void _init(void) -{ +void _init(void); +void _init(void) { // This _init() standin makes certain GCC environments happier. // They expect the main binary to have a constructor called _init; but don't provide a weak default. // Providing an empty constructor satisfies this odd case, and doesn't harm anything. } - #endif diff --git a/hw/bsp/samg/family.c b/hw/bsp/samg/family.c index 8db429e79..234dc0ec0 100644 --- a/hw/bsp/samg/family.c +++ b/hw/bsp/samg/family.c @@ -154,6 +154,7 @@ uint32_t board_millis(void) { // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. +void _init(void); void _init(void) { } diff --git a/hw/bsp/saml2x/family.c b/hw/bsp/saml2x/family.c index cdc65baf1..275dbbd2e 100644 --- a/hw/bsp/saml2x/family.c +++ b/hw/bsp/saml2x/family.c @@ -167,6 +167,7 @@ uint32_t board_millis(void) { #endif +void _init(void); void _init(void) { } diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index c6a90fff6..85562d474 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -94,6 +94,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index 12c7b592c..8d584a8e1 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -92,6 +92,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index cbb9c3568..72fe17482 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -91,6 +91,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index dc6bc2885..30ee23eb9 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -91,6 +91,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index 0ba2920d5..b708c667f 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -89,6 +89,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index db5736192..18e8676c5 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -117,6 +117,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 1a3365332..48c0edae6 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -119,6 +119,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 4da26f27e..d489a40b5 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -93,6 +93,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 5ec9926fe..3a4c8ae32 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -89,6 +89,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index 1df6bcb90..1240901e8 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -93,6 +93,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index b4f0bebbf..a1e49d1fd 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -124,6 +124,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32h7rs/family.cmake b/hw/bsp/stm32h7rs/family.cmake index 40230ef12..e67cabd4b 100644 --- a/hw/bsp/stm32h7rs/family.cmake +++ b/hw/bsp/stm32h7rs/family.cmake @@ -127,6 +127,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index 954bdb158..3278d2645 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -93,6 +93,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index eebcff4f3..8d44f2506 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -93,6 +93,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32n6/boards/stm32n6570dk/board.h b/hw/bsp/stm32n6/boards/stm32n6570dk/board.h index a3d945f76..bbcad6340 100644 --- a/hw/bsp/stm32n6/boards/stm32n6570dk/board.h +++ b/hw/bsp/stm32n6/boards/stm32n6570dk/board.h @@ -97,7 +97,7 @@ static board_pindef_t board_pindef[] = { //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -void SystemClock_Config(void) { +static void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; /* Configure the power domain */ @@ -214,7 +214,7 @@ static I2C_HandleTypeDef i2c_handle = { }}; static TCPP0203_Object_t tcpp0203_obj = {0}; -int32_t board_tcpp0203_init(void) { +static int32_t board_tcpp0203_init(void) { board_pindef_t *pindef = &board_pindef[PINID_TCPP0203_EN]; HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, GPIO_PIN_SET); @@ -231,16 +231,16 @@ int32_t board_tcpp0203_init(void) { return 0; } -int32_t board_tcpp0203_deinit(void) { +static int32_t board_tcpp0203_deinit(void) { return 0; } -int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { +static int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { TU_ASSERT(HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } -int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { +static int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h index 963ecad61..33c68f7cf 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h @@ -97,7 +97,7 @@ static board_pindef_t board_pindef[] = { //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -void SystemClock_Config(void) { +static void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; /* Configure the power domain */ diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake index 76763937e..e1b8524bf 100644 --- a/hw/bsp/stm32n6/family.cmake +++ b/hw/bsp/stm32n6/family.cmake @@ -76,7 +76,7 @@ function(add_board_target BOARD_TARGET) ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include + ${TOP}/lib/CMSIS_6/CMSIS/Core/Include ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) @@ -125,6 +125,12 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32u0/family.cmake b/hw/bsp/stm32u0/family.cmake index fefaea9de..535b4716f 100644 --- a/hw/bsp/stm32u0/family.cmake +++ b/hw/bsp/stm32u0/family.cmake @@ -94,6 +94,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 7a5935961..f1f9f6502 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -93,6 +93,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index 0ea937257..e749e2fcc 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -96,6 +96,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/stm32wba/family.cmake b/hw/bsp/stm32wba/family.cmake index 3f42879be..391989a6d 100644 --- a/hw/bsp/stm32wba/family.cmake +++ b/hw/bsp/stm32wba/family.cmake @@ -111,6 +111,11 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index e1cf94e96..7fe256fb6 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -61,6 +61,10 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + # Board target add_board_target(board_${BOARD}) diff --git a/hw/bsp/xmc4000/family.cmake b/hw/bsp/xmc4000/family.cmake index 6edd72caf..594bd1116 100644 --- a/hw/bsp/xmc4000/family.cmake +++ b/hw/bsp/xmc4000/family.cmake @@ -64,6 +64,10 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + # Board target add_board_target(board_${BOARD}) diff --git a/src/portable/mentor/musb/musb_max32.h b/src/portable/mentor/musb/musb_max32.h index 35849b5f8..599de2ca1 100644 --- a/src/portable/mentor/musb/musb_max32.h +++ b/src/portable/mentor/musb/musb_max32.h @@ -31,7 +31,17 @@ extern "C" { #endif +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + #include "mxc_device.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + #include "usbhs_regs.h" #define MUSB_CFG_SHARED_FIFO 1 // shared FIFO for TX and RX endpoints diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index 9801a485f..f1f4897cb 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -176,7 +176,7 @@ static void USBC_ForceVbusValidToHigh(void) USBC_Writel(reg_val, USBC_REG_ISCR(USBC0_BASE)); } -void USBC_SelectBus(u32 io_type, u32 ep_type, u32 ep_index) +static void USBC_SelectBus(u32 io_type, u32 ep_type, u32 ep_index) { u32 reg_val = 0; @@ -952,7 +952,7 @@ void dcd_remote_wakeup(uint8_t rhport) { (void)rhport; USBC_REG_set_bit_b(USBC_BP_POWER_D_RESUME, USBC_REG_PCTL(USBC0_BASE)); - delay_ms(10); + tusb_time_delay_ms_api(10); USBC_REG_clear_bit_b(USBC_BP_POWER_D_RESUME, USBC_REG_PCTL(USBC0_BASE)); } diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index e3c21a86d..f1e4dbd77 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -77,6 +77,7 @@ CFG_TUD_MEM_SECTION static struct { TU_ATTR_ALWAYS_INLINE static inline uint8_t dwc2_ep_count(const dwc2_regs_t* dwc2) { #if TU_CHECK_MCU(OPT_MCU_GD32VF103) + (void) dwc2; return DWC2_EP_MAX; #else const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; diff --git a/src/portable/wch/hcd_ch32_usbfs.c b/src/portable/wch/hcd_ch32_usbfs.c index 200136906..7bbf122dd 100644 --- a/src/portable/wch/hcd_ch32_usbfs.c +++ b/src/portable/wch/hcd_ch32_usbfs.c @@ -36,7 +36,17 @@ #include "bsp/board_api.h" +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#endif + #include "ch32v20x.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + #include "ch32v20x_usb.h" #define USBFS_RX_BUF_LEN 64 diff --git a/tools/get_deps.py b/tools/get_deps.py index c243137fa..c1e2c075d 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -246,12 +246,12 @@ deps_optional = { 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' - 'stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32n6 stm32u0 stm32u5 stm32wb stm32wba' + 'stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32u0 stm32u5 stm32wb stm32wba' 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg ' 'tm4c '], 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', - 'b0bbb0423b278ca632cfe1474eb227961d835fd2', - 'ra'], + '6f0a58d01aa9bd2feba212097f9afe7acd991d52', + 'ra stm32n6'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1 From 6f93feee0957ea343cfc376d99d7d2922777d74f Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 14 Oct 2025 23:23:23 +0700 Subject: suppress some warnings in zephyr build --- hw/bsp/family_support.cmake | 5 +++++ hw/bsp/stm32n6/family.mk | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index daabed81b..d8ef79f60 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -121,6 +121,11 @@ if (RTOS STREQUAL zephyr) set(BOARD_ROOT ${TOP}/hw/bsp/${FAMILY}) set(ZEPHYR_BOARD_ALIASES ${CMAKE_CURRENT_LIST_DIR}/zephyr_board_aliases.cmake) find_package(Zephyr REQUIRED HINTS ${TOP}/zephyr) + list(REMOVE_ITEM WARN_FLAGS_GNU + -Wredundant-decls + -Wundef + -Wcast-align + ) endif () #------------------------------------------------------------- diff --git a/hw/bsp/stm32n6/family.mk b/hw/bsp/stm32n6/family.mk index 37087ed42..45554e251 100644 --- a/hw/bsp/stm32n6/family.mk +++ b/hw/bsp/stm32n6/family.mk @@ -76,7 +76,7 @@ SRC_C += \ INC += \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/lib/CMSIS_6/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ $(TOP)/$(ST_HAL_DRIVER)/Inc -- cgit v1.3.1 From 2a8811ebb0213297dedb34c33f29c9035a516600 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 00:15:46 +0700 Subject: merge samd2x and saml2x bsp, add OPT_MCU_SAML2X to replace OPT_MCU_SAML21 & OPT_MCU_SAML22 --- .../device/net_lwip_webserver/src/tusb_config.h | 2 +- hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h | 153 ------ hw/bsp/samd21/boards/atsamd21_xpro/board.cmake | 9 - hw/bsp/samd21/boards/atsamd21_xpro/board.h | 60 --- hw/bsp/samd21/boards/atsamd21_xpro/board.mk | 10 - .../boards/atsamd21_xpro/samd21j18a_flash.ld | 144 ------ .../boards/circuitplayground_express/board.cmake | 9 - .../boards/circuitplayground_express/board.h | 59 --- .../boards/circuitplayground_express/board.mk | 9 - .../circuitplayground_express.ld | 146 ------ hw/bsp/samd21/boards/curiosity_nano/board.cmake | 10 - hw/bsp/samd21/boards/curiosity_nano/board.h | 59 --- hw/bsp/samd21/boards/curiosity_nano/board.mk | 14 - .../boards/curiosity_nano/samd21g17a_flash.ld | 144 ------ hw/bsp/samd21/boards/cynthion_d21/board.cmake | 12 - hw/bsp/samd21/boards/cynthion_d21/board.h | 55 --- hw/bsp/samd21/boards/cynthion_d21/board.mk | 16 - .../samd21/boards/cynthion_d21/samd21g18a_flash.ld | 144 ------ .../samd21/boards/feather_m0_express/board.cmake | 9 - hw/bsp/samd21/boards/feather_m0_express/board.h | 74 --- hw/bsp/samd21/boards/feather_m0_express/board.mk | 9 - .../feather_m0_express/feather_m0_express.ld | 146 ------ hw/bsp/samd21/boards/itsybitsy_m0/board.cmake | 9 - hw/bsp/samd21/boards/itsybitsy_m0/board.h | 59 --- hw/bsp/samd21/boards/itsybitsy_m0/board.mk | 9 - hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld | 146 ------ hw/bsp/samd21/boards/metro_m0_express/board.cmake | 9 - hw/bsp/samd21/boards/metro_m0_express/board.h | 74 --- hw/bsp/samd21/boards/metro_m0_express/board.mk | 9 - .../boards/metro_m0_express/metro_m0_express.ld | 146 ------ hw/bsp/samd21/boards/qtpy/board.cmake | 9 - hw/bsp/samd21/boards/qtpy/board.h | 55 --- hw/bsp/samd21/boards/qtpy/board.mk | 11 - hw/bsp/samd21/boards/qtpy/qtpy.ld | 146 ------ hw/bsp/samd21/boards/seeeduino_xiao/board.cmake | 9 - hw/bsp/samd21/boards/seeeduino_xiao/board.h | 59 --- hw/bsp/samd21/boards/seeeduino_xiao/board.mk | 9 - .../samd21/boards/seeeduino_xiao/seeeduino_xiao.ld | 146 ------ .../boards/sparkfun_samd21_mini_usb/board.cmake | 9 - .../samd21/boards/sparkfun_samd21_mini_usb/board.h | 62 --- .../boards/sparkfun_samd21_mini_usb/board.mk | 9 - .../sparkfun_samd21_mini_usb.ld | 146 ------ hw/bsp/samd21/boards/trinket_m0/board.cmake | 9 - hw/bsp/samd21/boards/trinket_m0/board.h | 44 -- hw/bsp/samd21/boards/trinket_m0/board.mk | 4 - hw/bsp/samd21/boards/trinket_m0/trinket_m0.ld | 146 ------ hw/bsp/samd21/family.c | 453 ----------------- hw/bsp/samd21/family.cmake | 110 ----- hw/bsp/samd21/family.mk | 53 -- hw/bsp/samd2x_l2x/FreeRTOSConfig/FreeRTOSConfig.h | 153 ++++++ hw/bsp/samd2x_l2x/boards/atsamd21_xpro/board.cmake | 10 + hw/bsp/samd2x_l2x/boards/atsamd21_xpro/board.h | 60 +++ hw/bsp/samd2x_l2x/boards/atsamd21_xpro/board.mk | 12 + .../boards/atsamd21_xpro/samd21j18a_flash.ld | 144 ++++++ hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.cmake | 9 + hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.h | 55 +++ hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.mk | 12 + .../boards/atsaml21_xpro/saml21j18b_flash.ld | 155 ++++++ .../boards/circuitplayground_express/board.cmake | 10 + .../boards/circuitplayground_express/board.h | 59 +++ .../boards/circuitplayground_express/board.mk | 11 + .../circuitplayground_express.ld | 146 ++++++ .../samd2x_l2x/boards/curiosity_nano/board.cmake | 11 + hw/bsp/samd2x_l2x/boards/curiosity_nano/board.h | 59 +++ hw/bsp/samd2x_l2x/boards/curiosity_nano/board.mk | 16 + .../boards/curiosity_nano/samd21g17a_flash.ld | 144 ++++++ hw/bsp/samd2x_l2x/boards/cynthion_d21/board.cmake | 13 + hw/bsp/samd2x_l2x/boards/cynthion_d21/board.h | 55 +++ hw/bsp/samd2x_l2x/boards/cynthion_d21/board.mk | 18 + .../boards/cynthion_d21/samd21g18a_flash.ld | 144 ++++++ .../boards/feather_m0_express/board.cmake | 10 + .../samd2x_l2x/boards/feather_m0_express/board.h | 74 +++ .../samd2x_l2x/boards/feather_m0_express/board.mk | 11 + .../feather_m0_express/feather_m0_express.ld | 146 ++++++ hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.cmake | 10 + hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.h | 59 +++ hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.mk | 11 + .../samd2x_l2x/boards/itsybitsy_m0/itsybitsy_m0.ld | 146 ++++++ .../samd2x_l2x/boards/metro_m0_express/board.cmake | 10 + hw/bsp/samd2x_l2x/boards/metro_m0_express/board.h | 74 +++ hw/bsp/samd2x_l2x/boards/metro_m0_express/board.mk | 11 + .../boards/metro_m0_express/metro_m0_express.ld | 146 ++++++ hw/bsp/samd2x_l2x/boards/qtpy/board.cmake | 10 + hw/bsp/samd2x_l2x/boards/qtpy/board.h | 55 +++ hw/bsp/samd2x_l2x/boards/qtpy/board.mk | 13 + hw/bsp/samd2x_l2x/boards/qtpy/qtpy.ld | 146 ++++++ .../samd2x_l2x/boards/saml22_feather/board.cmake | 9 + hw/bsp/samd2x_l2x/boards/saml22_feather/board.h | 52 ++ hw/bsp/samd2x_l2x/boards/saml22_feather/board.mk | 11 + .../boards/saml22_feather/saml22_feather.ld | 146 ++++++ .../samd2x_l2x/boards/seeeduino_xiao/board.cmake | 10 + hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.h | 59 +++ hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.mk | 11 + .../boards/seeeduino_xiao/seeeduino_xiao.ld | 146 ++++++ .../samd2x_l2x/boards/sensorwatch_m0/board.cmake | 9 + hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.h | 52 ++ hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.mk | 11 + .../boards/sensorwatch_m0/sensorwatch_m0.ld | 146 ++++++ .../boards/sparkfun_samd21_mini_usb/board.cmake | 10 + .../boards/sparkfun_samd21_mini_usb/board.h | 62 +++ .../boards/sparkfun_samd21_mini_usb/board.mk | 11 + .../sparkfun_samd21_mini_usb.ld | 146 ++++++ hw/bsp/samd2x_l2x/boards/trinket_m0/board.cmake | 10 + hw/bsp/samd2x_l2x/boards/trinket_m0/board.h | 44 ++ hw/bsp/samd2x_l2x/boards/trinket_m0/board.mk | 6 + hw/bsp/samd2x_l2x/boards/trinket_m0/trinket_m0.ld | 146 ++++++ hw/bsp/samd2x_l2x/family.c | 550 +++++++++++++++++++++ hw/bsp/samd2x_l2x/family.cmake | 164 ++++++ hw/bsp/samd2x_l2x/family.mk | 92 ++++ hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h | 153 ------ hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake | 9 - hw/bsp/saml2x/boards/atsaml21_xpro/board.h | 55 --- hw/bsp/saml2x/boards/atsaml21_xpro/board.mk | 12 - .../boards/atsaml21_xpro/saml21j18b_flash.ld | 155 ------ hw/bsp/saml2x/boards/saml22_feather/board.cmake | 9 - hw/bsp/saml2x/boards/saml22_feather/board.h | 52 -- hw/bsp/saml2x/boards/saml22_feather/board.mk | 11 - .../saml2x/boards/saml22_feather/saml22_feather.ld | 146 ------ hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake | 9 - hw/bsp/saml2x/boards/sensorwatch_m0/board.h | 52 -- hw/bsp/saml2x/boards/sensorwatch_m0/board.mk | 11 - .../saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld | 146 ------ hw/bsp/saml2x/family.c | 173 ------- hw/bsp/saml2x/family.cmake | 115 ----- hw/bsp/saml2x/family.mk | 53 -- src/common/tusb_mcu.h | 4 +- src/portable/microchip/samd/dcd_samd.c | 24 +- src/portable/microchip/samd/hcd_samd.c | 12 +- src/tusb_option.h | 5 +- 129 files changed, 4148 insertions(+), 4432 deletions(-) delete mode 100644 hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/samd21/boards/atsamd21_xpro/board.cmake delete mode 100644 hw/bsp/samd21/boards/atsamd21_xpro/board.h delete mode 100644 hw/bsp/samd21/boards/atsamd21_xpro/board.mk delete mode 100644 hw/bsp/samd21/boards/atsamd21_xpro/samd21j18a_flash.ld delete mode 100644 hw/bsp/samd21/boards/circuitplayground_express/board.cmake delete mode 100644 hw/bsp/samd21/boards/circuitplayground_express/board.h delete mode 100644 hw/bsp/samd21/boards/circuitplayground_express/board.mk delete mode 100644 hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld delete mode 100644 hw/bsp/samd21/boards/curiosity_nano/board.cmake delete mode 100644 hw/bsp/samd21/boards/curiosity_nano/board.h delete mode 100644 hw/bsp/samd21/boards/curiosity_nano/board.mk delete mode 100644 hw/bsp/samd21/boards/curiosity_nano/samd21g17a_flash.ld delete mode 100644 hw/bsp/samd21/boards/cynthion_d21/board.cmake delete mode 100644 hw/bsp/samd21/boards/cynthion_d21/board.h delete mode 100644 hw/bsp/samd21/boards/cynthion_d21/board.mk delete mode 100644 hw/bsp/samd21/boards/cynthion_d21/samd21g18a_flash.ld delete mode 100644 hw/bsp/samd21/boards/feather_m0_express/board.cmake delete mode 100644 hw/bsp/samd21/boards/feather_m0_express/board.h delete mode 100644 hw/bsp/samd21/boards/feather_m0_express/board.mk delete mode 100644 hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld delete mode 100644 hw/bsp/samd21/boards/itsybitsy_m0/board.cmake delete mode 100644 hw/bsp/samd21/boards/itsybitsy_m0/board.h delete mode 100644 hw/bsp/samd21/boards/itsybitsy_m0/board.mk delete mode 100644 hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld delete mode 100644 hw/bsp/samd21/boards/metro_m0_express/board.cmake delete mode 100644 hw/bsp/samd21/boards/metro_m0_express/board.h delete mode 100644 hw/bsp/samd21/boards/metro_m0_express/board.mk delete mode 100644 hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld delete mode 100644 hw/bsp/samd21/boards/qtpy/board.cmake delete mode 100644 hw/bsp/samd21/boards/qtpy/board.h delete mode 100644 hw/bsp/samd21/boards/qtpy/board.mk delete mode 100644 hw/bsp/samd21/boards/qtpy/qtpy.ld delete mode 100644 hw/bsp/samd21/boards/seeeduino_xiao/board.cmake delete mode 100644 hw/bsp/samd21/boards/seeeduino_xiao/board.h delete mode 100644 hw/bsp/samd21/boards/seeeduino_xiao/board.mk delete mode 100644 hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld delete mode 100644 hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.cmake delete mode 100644 hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h delete mode 100644 hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.mk delete mode 100644 hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/sparkfun_samd21_mini_usb.ld delete mode 100644 hw/bsp/samd21/boards/trinket_m0/board.cmake delete mode 100644 hw/bsp/samd21/boards/trinket_m0/board.h delete mode 100644 hw/bsp/samd21/boards/trinket_m0/board.mk delete mode 100644 hw/bsp/samd21/boards/trinket_m0/trinket_m0.ld delete mode 100644 hw/bsp/samd21/family.c delete mode 100644 hw/bsp/samd21/family.cmake delete mode 100644 hw/bsp/samd21/family.mk create mode 100644 hw/bsp/samd2x_l2x/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/samd2x_l2x/boards/atsamd21_xpro/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/atsamd21_xpro/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/atsamd21_xpro/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/atsamd21_xpro/samd21j18a_flash.ld create mode 100644 hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/atsaml21_xpro/saml21j18b_flash.ld create mode 100644 hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/circuitplayground_express/circuitplayground_express.ld create mode 100644 hw/bsp/samd2x_l2x/boards/curiosity_nano/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/curiosity_nano/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/curiosity_nano/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/curiosity_nano/samd21g17a_flash.ld create mode 100644 hw/bsp/samd2x_l2x/boards/cynthion_d21/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/cynthion_d21/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/cynthion_d21/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/cynthion_d21/samd21g18a_flash.ld create mode 100644 hw/bsp/samd2x_l2x/boards/feather_m0_express/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/feather_m0_express/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/feather_m0_express/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/feather_m0_express/feather_m0_express.ld create mode 100644 hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/itsybitsy_m0/itsybitsy_m0.ld create mode 100644 hw/bsp/samd2x_l2x/boards/metro_m0_express/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/metro_m0_express/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/metro_m0_express/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/metro_m0_express/metro_m0_express.ld create mode 100644 hw/bsp/samd2x_l2x/boards/qtpy/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/qtpy/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/qtpy/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/qtpy/qtpy.ld create mode 100644 hw/bsp/samd2x_l2x/boards/saml22_feather/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/saml22_feather/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/saml22_feather/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/saml22_feather/saml22_feather.ld create mode 100644 hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/seeeduino_xiao/seeeduino_xiao.ld create mode 100644 hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/sensorwatch_m0/sensorwatch_m0.ld create mode 100644 hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/sparkfun_samd21_mini_usb.ld create mode 100644 hw/bsp/samd2x_l2x/boards/trinket_m0/board.cmake create mode 100644 hw/bsp/samd2x_l2x/boards/trinket_m0/board.h create mode 100644 hw/bsp/samd2x_l2x/boards/trinket_m0/board.mk create mode 100644 hw/bsp/samd2x_l2x/boards/trinket_m0/trinket_m0.ld create mode 100644 hw/bsp/samd2x_l2x/family.c create mode 100644 hw/bsp/samd2x_l2x/family.cmake create mode 100644 hw/bsp/samd2x_l2x/family.mk delete mode 100644 hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake delete mode 100644 hw/bsp/saml2x/boards/atsaml21_xpro/board.h delete mode 100644 hw/bsp/saml2x/boards/atsaml21_xpro/board.mk delete mode 100644 hw/bsp/saml2x/boards/atsaml21_xpro/saml21j18b_flash.ld delete mode 100644 hw/bsp/saml2x/boards/saml22_feather/board.cmake delete mode 100644 hw/bsp/saml2x/boards/saml22_feather/board.h delete mode 100644 hw/bsp/saml2x/boards/saml22_feather/board.mk delete mode 100644 hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld delete mode 100644 hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake delete mode 100644 hw/bsp/saml2x/boards/sensorwatch_m0/board.h delete mode 100644 hw/bsp/saml2x/boards/sensorwatch_m0/board.mk delete mode 100644 hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld delete mode 100644 hw/bsp/saml2x/family.c delete mode 100644 hw/bsp/saml2x/family.cmake delete mode 100644 hw/bsp/saml2x/family.mk diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h index c774f59ff..31731ac1b 100644 --- a/examples/device/net_lwip_webserver/src/tusb_config.h +++ b/examples/device/net_lwip_webserver/src/tusb_config.h @@ -88,7 +88,7 @@ extern "C" { #ifndef USE_ECM #if TU_CHECK_MCU(OPT_MCU_LPC15XX, OPT_MCU_LPC40XX, OPT_MCU_LPC51UXX, OPT_MCU_LPC54) #define USE_ECM 1 -#elif TU_CHECK_MCU(OPT_MCU_SAMD21, OPT_MCU_SAML21, OPT_MCU_SAML22) +#elif TU_CHECK_MCU(OPT_MCU_SAMD21, OPT_MCU_SAML2X) #define USE_ECM 1 #elif TU_CHECK_MCU(OPT_MCU_STM32F0, OPT_MCU_STM32F1) #define USE_ECM 1 diff --git a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index 6c9ecae2d..000000000 --- a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "sam.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#if defined(__ARM_FP) && __ARM_FP >= 4 - #define configENABLE_FPU 1 -#else - #define configENABLE_FPU 0 -#endif -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS 2 - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/circuitplayground_express/board.cmake b/hw/bsp/samd21/boards/circuitplayground_express/board.cmake deleted file mode 100644 index c1a612936..000000000 --- a/hw/bsp/samd21/boards/circuitplayground_express/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(JLINK_DEVICE ATSAMD21G18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21G18A__ - CFG_EXAMPLE_VIDEO_READONLY - ) -endfunction() diff --git a/hw/bsp/samd21/boards/circuitplayground_express/board.h b/hw/bsp/samd21/boards/circuitplayground_express/board.h deleted file mode 100644 index bfe2d9951..000000000 --- a/hw/bsp/samd21/boards/circuitplayground_express/board.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Adafruit Circuit Playground Express - url: https://www.adafruit.com/product/3333 -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 28 -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; (void) state; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/circuitplayground_express/board.mk b/hw/bsp/samd21/boards/circuitplayground_express/board.mk deleted file mode 100644 index d6c9150b3..000000000 --- a/hw/bsp/samd21/boards/circuitplayground_express/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -flash: flash-bossac diff --git a/hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld b/hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld deleted file mode 100644 index ce7aff80b..000000000 --- a/hw/bsp/samd21/boards/circuitplayground_express/circuitplayground_express.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/curiosity_nano/board.cmake b/hw/bsp/samd21/boards/curiosity_nano/board.cmake deleted file mode 100644 index ff779c0fd..000000000 --- a/hw/bsp/samd21/boards/curiosity_nano/board.cmake +++ /dev/null @@ -1,10 +0,0 @@ -set(JLINK_DEVICE atsamd21g17a) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/samd21g17a_flash.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21G17A__ - CFG_EXAMPLE_MSC_READONLY - CFG_EXAMPLE_VIDEO_READONLY - ) -endfunction() diff --git a/hw/bsp/samd21/boards/curiosity_nano/board.h b/hw/bsp/samd21/boards/curiosity_nano/board.h deleted file mode 100644 index a2a7385a4..000000000 --- a/hw/bsp/samd21/boards/curiosity_nano/board.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: SAMD21 Curiosty Nano - url: https://www.microchip.com/en-us/development-tool/dm320119 -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN (32 + 10) // PB10 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN (0 + 11) // PB11 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 31 // CDC5_RX -#define UART_TX_PIN 37 // CDC5_TX - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; (void) state; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/curiosity_nano/board.mk b/hw/bsp/samd21/boards/curiosity_nano/board.mk deleted file mode 100644 index 112fb6946..000000000 --- a/hw/bsp/samd21/boards/curiosity_nano/board.mk +++ /dev/null @@ -1,14 +0,0 @@ -CFLAGS += -D__SAMD21G17A__ -DCFG_EXAMPLE_MSC_READONLY -DCFG_EXAMPLE_VIDEO_READONLY - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/samd21g17a_flash.ld - -# For flash-jlink target -JLINK_DEVICE = atsamd21g17a - -# flash using jlink (options are: jlink/cmsisdap/stlink/dfu) -#flash: flash-jlink - -PYOCD_TARGET = atsamd21g17a -PYOCD_OPTION = -O dap_protocol=swd -flash: flash-pyocd diff --git a/hw/bsp/samd21/boards/curiosity_nano/samd21g17a_flash.ld b/hw/bsp/samd21/boards/curiosity_nano/samd21g17a_flash.ld deleted file mode 100644 index e03a4ce60..000000000 --- a/hw/bsp/samd21/boards/curiosity_nano/samd21g17a_flash.ld +++ /dev/null @@ -1,144 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G17A/D - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00020000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00004000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x1000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/cynthion_d21/board.cmake b/hw/bsp/samd21/boards/cynthion_d21/board.cmake deleted file mode 100644 index fb54b7561..000000000 --- a/hw/bsp/samd21/boards/cynthion_d21/board.cmake +++ /dev/null @@ -1,12 +0,0 @@ -set(JLINK_DEVICE ATSAMD21G18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/samd21g18a_flash.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21G18A__ - CFG_EXAMPLE_VIDEO_READONLY - ) - target_link_options(${TARGET} PUBLIC - "LINKER:--defsym=BOOTLOADER_SIZE=0x800" - ) -endfunction() diff --git a/hw/bsp/samd21/boards/cynthion_d21/board.h b/hw/bsp/samd21/boards/cynthion_d21/board.h deleted file mode 100644 index 83782bc65..000000000 --- a/hw/bsp/samd21/boards/cynthion_d21/board.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Great Scott Gadgets Cynthion - url: https://greatscottgadgets.com/cynthion/ -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA22 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN PIN_PB22 -#define BUTTON_STATE_ACTIVE 0 - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; (void) state; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/cynthion_d21/board.mk b/hw/bsp/samd21/boards/cynthion_d21/board.mk deleted file mode 100644 index 52c9d60cb..000000000 --- a/hw/bsp/samd21/boards/cynthion_d21/board.mk +++ /dev/null @@ -1,16 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -LD_FILE = $(BOARD_PATH)/samd21g18a_flash.ld - -# Default bootloader size is now 2K, allow to specify other -ifeq ($(BOOTLOADER_SIZE), ) - BOOTLOADER_SIZE := 0x800 -endif -LDFLAGS += -Wl,--defsym=BOOTLOADER_SIZE=$(BOOTLOADER_SIZE) - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -# flash using dfu-util -flash: $(BUILD)/$(PROJECT).bin - dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< diff --git a/hw/bsp/samd21/boards/cynthion_d21/samd21g18a_flash.ld b/hw/bsp/samd21/boards/cynthion_d21/samd21g18a_flash.ld deleted file mode 100644 index 95d71b9e3..000000000 --- a/hw/bsp/samd21/boards/cynthion_d21/samd21g18a_flash.ld +++ /dev/null @@ -1,144 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + BOOTLOADER_SIZE, LENGTH = 0x00040000 - BOOTLOADER_SIZE - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.cmake b/hw/bsp/samd21/boards/feather_m0_express/board.cmake deleted file mode 100644 index c1a612936..000000000 --- a/hw/bsp/samd21/boards/feather_m0_express/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(JLINK_DEVICE ATSAMD21G18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21G18A__ - CFG_EXAMPLE_VIDEO_READONLY - ) -endfunction() diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.h b/hw/bsp/samd21/boards/feather_m0_express/board.h deleted file mode 100644 index 6fe13eb30..000000000 --- a/hw/bsp/samd21/boards/feather_m0_express/board.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Adafruit Feather M0 Express - url: https://www.adafruit.com/product/3403 -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -// SPI for USB host shield -#define MAX3421_SERCOM_ID 4 // SERCOM4 -#define MAX3421_SERCOM_FUNCTION 3 // function D (Sercom Alt) - -#define MAX3421_SCK_PIN (32+11) -#define MAX3421_MOSI_PIN (32+10) -#define MAX3421_MISO_PIN 12 -#define MAX3421_TX_PAD 1 // MOSI = PAD_2, SCK = PAD_3 -#define MAX3421_RX_PAD 0 // MISO = PAD_2 - -#define MAX3421_CS_PIN 18 // D10 - -#define MAX3421_INTR_PIN 7 // D10 -#define MAX3421_INTR_EIC_ID 7 // EIC7 - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; (void) state; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.mk b/hw/bsp/samd21/boards/feather_m0_express/board.mk deleted file mode 100644 index d6c9150b3..000000000 --- a/hw/bsp/samd21/boards/feather_m0_express/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -flash: flash-bossac diff --git a/hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld b/hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld deleted file mode 100644 index ce7aff80b..000000000 --- a/hw/bsp/samd21/boards/feather_m0_express/feather_m0_express.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/itsybitsy_m0/board.cmake b/hw/bsp/samd21/boards/itsybitsy_m0/board.cmake deleted file mode 100644 index c1a612936..000000000 --- a/hw/bsp/samd21/boards/itsybitsy_m0/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(JLINK_DEVICE ATSAMD21G18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21G18A__ - CFG_EXAMPLE_VIDEO_READONLY - ) -endfunction() diff --git a/hw/bsp/samd21/boards/itsybitsy_m0/board.h b/hw/bsp/samd21/boards/itsybitsy_m0/board.h deleted file mode 100644 index d901b2ea4..000000000 --- a/hw/bsp/samd21/boards/itsybitsy_m0/board.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Adafruit ItsyBitsy M0 - url: https://www.adafruit.com/product/3727 -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 21 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; (void) state; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/itsybitsy_m0/board.mk b/hw/bsp/samd21/boards/itsybitsy_m0/board.mk deleted file mode 100644 index d6c9150b3..000000000 --- a/hw/bsp/samd21/boards/itsybitsy_m0/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -flash: flash-bossac diff --git a/hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld b/hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld deleted file mode 100644 index ce7aff80b..000000000 --- a/hw/bsp/samd21/boards/itsybitsy_m0/itsybitsy_m0.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/metro_m0_express/board.cmake b/hw/bsp/samd21/boards/metro_m0_express/board.cmake deleted file mode 100644 index c1a612936..000000000 --- a/hw/bsp/samd21/boards/metro_m0_express/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(JLINK_DEVICE ATSAMD21G18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21G18A__ - CFG_EXAMPLE_VIDEO_READONLY - ) -endfunction() diff --git a/hw/bsp/samd21/boards/metro_m0_express/board.h b/hw/bsp/samd21/boards/metro_m0_express/board.h deleted file mode 100644 index 726de3259..000000000 --- a/hw/bsp/samd21/boards/metro_m0_express/board.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Adafruit Metro M0 Express - url: https://www.adafruit.com/product/3505 -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 1 - -// Button: D5 -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -// SPI for USB host shield -#define MAX3421_SERCOM_ID 4 // SERCOM4 -#define MAX3421_SERCOM_FUNCTION 3 // function D (Sercom Alt) - -#define MAX3421_SCK_PIN (32+11) -#define MAX3421_MOSI_PIN (32+10) -#define MAX3421_MISO_PIN 12 -#define MAX3421_TX_PAD 1 // MOSI = PAD_2, SCK = PAD_3 -#define MAX3421_RX_PAD 0 // MISO = PAD_2 - -#define MAX3421_CS_PIN 18 // D10 - -#define MAX3421_INTR_PIN 7 // D9 -#define MAX3421_INTR_EIC_ID 7 // EIC7 - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; (void) state; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/metro_m0_express/board.mk b/hw/bsp/samd21/boards/metro_m0_express/board.mk deleted file mode 100644 index d6c9150b3..000000000 --- a/hw/bsp/samd21/boards/metro_m0_express/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -flash: flash-bossac diff --git a/hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld b/hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld deleted file mode 100644 index ce7aff80b..000000000 --- a/hw/bsp/samd21/boards/metro_m0_express/metro_m0_express.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/qtpy/board.cmake b/hw/bsp/samd21/boards/qtpy/board.cmake deleted file mode 100644 index f6cd446dd..000000000 --- a/hw/bsp/samd21/boards/qtpy/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(JLINK_DEVICE ATSAMD21E18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21E18A__ - CFG_EXAMPLE_VIDEO_READONLY - ) -endfunction() diff --git a/hw/bsp/samd21/boards/qtpy/board.h b/hw/bsp/samd21/boards/qtpy/board.h deleted file mode 100644 index b1cf338e4..000000000 --- a/hw/bsp/samd21/boards/qtpy/board.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Adafruit QT Py - url: https://www.adafruit.com/product/4600 -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED is neopixel, leave unset for now - -// Button is wired to reset - -// UART -#define UART_RX_PIN 8 -#define UART_TX_PIN 7 - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; (void) state; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/qtpy/board.mk b/hw/bsp/samd21/boards/qtpy/board.mk deleted file mode 100644 index 6cefa84c3..000000000 --- a/hw/bsp/samd21/boards/qtpy/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -# For Adafruit QT Py board - -CFLAGS += -D__SAMD21E18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21E18 - -flash: flash-bossac diff --git a/hw/bsp/samd21/boards/qtpy/qtpy.ld b/hw/bsp/samd21/boards/qtpy/qtpy.ld deleted file mode 100644 index ce7aff80b..000000000 --- a/hw/bsp/samd21/boards/qtpy/qtpy.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.cmake b/hw/bsp/samd21/boards/seeeduino_xiao/board.cmake deleted file mode 100644 index c1a612936..000000000 --- a/hw/bsp/samd21/boards/seeeduino_xiao/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(JLINK_DEVICE ATSAMD21G18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21G18A__ - CFG_EXAMPLE_VIDEO_READONLY - ) -endfunction() diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.h b/hw/bsp/samd21/boards/seeeduino_xiao/board.h deleted file mode 100644 index 1c434c68c..000000000 --- a/hw/bsp/samd21/boards/seeeduino_xiao/board.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: Seeeduino XIAO - url: https://wiki.seeedstudio.com/Seeeduino-XIAO/ -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN 9 // PA4 pin D1 on seed input -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_RX_PIN 4 -#define UART_TX_PIN 5 - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; (void) state; -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.mk b/hw/bsp/samd21/boards/seeeduino_xiao/board.mk deleted file mode 100644 index 1c888da3a..000000000 --- a/hw/bsp/samd21/boards/seeeduino_xiao/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld b/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld deleted file mode 100644 index 0d0c4e6c4..000000000 --- a/hw/bsp/samd21/boards/seeeduino_xiao/seeeduino_xiao.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K /* 8K offset to preserve bootloader */ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.cmake b/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.cmake deleted file mode 100644 index c1a612936..000000000 --- a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(JLINK_DEVICE ATSAMD21G18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21G18A__ - CFG_EXAMPLE_VIDEO_READONLY - ) -endfunction() diff --git a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h b/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h deleted file mode 100644 index a05cf5e4e..000000000 --- a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: SparkFun SAMD21 Mini - url: https://www.sparkfun.com/products/13664 -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN 17 // PA17 (D13) -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN 14 // PA14 (D2) -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_SERCOM 0 -#define UART_RX_PIN 11 // PA11 D0 -#define UART_TX_PIN 10 // PA10 D1 - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; - gpio_set_pin_direction(PIN_PA28, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA28, state); -} - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.mk b/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.mk deleted file mode 100644 index d6c9150b3..000000000 --- a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -flash: flash-bossac diff --git a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/sparkfun_samd21_mini_usb.ld b/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/sparkfun_samd21_mini_usb.ld deleted file mode 100644 index 0754a8e9c..000000000 --- a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/sparkfun_samd21_mini_usb.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000-0x0004 /* 4 bytes used by bootloader to keep data between resets */ -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/boards/trinket_m0/board.cmake b/hw/bsp/samd21/boards/trinket_m0/board.cmake deleted file mode 100644 index f6cd446dd..000000000 --- a/hw/bsp/samd21/boards/trinket_m0/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(JLINK_DEVICE ATSAMD21E18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAMD21E18A__ - CFG_EXAMPLE_VIDEO_READONLY - ) -endfunction() diff --git a/hw/bsp/samd21/boards/trinket_m0/board.h b/hw/bsp/samd21/boards/trinket_m0/board.h deleted file mode 100644 index 01ad83089..000000000 --- a/hw/bsp/samd21/boards/trinket_m0/board.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021 Jean Gressmann - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -/* metadata: - name: Adafruit Trinket M0 - url: https://www.adafruit.com/product/3500 -*/ - -#pragma once - -// LED -#define LED_PIN 10 // PA10 -#define LED_STATE_ON 1 - -// UART -#define UART_SERCOM 0 -#define UART_RX_PIN 7 -#define UART_TX_PIN 6 - -static inline void board_vbus_set(uint8_t rhport, bool state) { - (void) rhport; (void) state; -} diff --git a/hw/bsp/samd21/boards/trinket_m0/board.mk b/hw/bsp/samd21/boards/trinket_m0/board.mk deleted file mode 100644 index 6addf13b7..000000000 --- a/hw/bsp/samd21/boards/trinket_m0/board.mk +++ /dev/null @@ -1,4 +0,0 @@ -CFLAGS += -D__SAMD21E18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/trinket_m0.ld diff --git a/hw/bsp/samd21/boards/trinket_m0/trinket_m0.ld b/hw/bsp/samd21/boards/trinket_m0/trinket_m0.ld deleted file mode 100644 index ce7aff80b..000000000 --- a/hw/bsp/samd21/boards/trinket_m0/trinket_m0.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -ENTRY(Reset_Handler) - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd21/family.c b/hw/bsp/samd21/family.c deleted file mode 100644 index 14e60e917..000000000 --- a/hw/bsp/samd21/family.c +++ /dev/null @@ -1,453 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Microchip -*/ - -#include "sam.h" -#include "bsp/board_api.h" - -// Suppress warning caused by mcu driver -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wcast-qual" -#endif - -#include "hal/include/hal_gpio.h" -#include "hal/include/hal_init.h" -#include "hri/hri_nvmctrl_d21.h" - -#include "hpl/gclk/hpl_gclk_base.h" -#include "hpl_pm_config.h" -#include "hpl/pm/hpl_pm_base.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -static inline void board_vbus_set(uint8_t rhport, bool state) TU_ATTR_UNUSED; -#include "board.h" - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -/* Referenced GCLKs, should be initialized firstly */ -#define _GCLK_INIT_1ST (1 << 0 | 1 << 1) - -/* Not referenced GCLKs, initialized last */ -#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST) - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_Handler(void) { -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif - -#if CFG_TUH_ENABLED && !CFG_TUH_MAX3421 - tuh_int_handler(0); -#endif -} - -//--------------------------------------------------------------------+ -// Implementation -//--------------------------------------------------------------------+ -static void uart_init(void); - -#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 -#define MAX3421_SERCOM TU_XSTRCAT(SERCOM, MAX3421_SERCOM_ID) -static void max3421_init(void); -#endif - -void board_init(void) { - // Clock init ( follow hpl_init.c ) - hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, 2); - - _pm_init(); - _sysctrl_init_sources(); -#if _GCLK_INIT_1ST - _gclk_init_generators_by_fref(_GCLK_INIT_1ST); -#endif - _sysctrl_init_referenced_generators(); - _gclk_init_generators_by_fref(_GCLK_INIT_LAST); - - // Update SystemCoreClock since it is hard coded with asf4 and not correct - // Init 1ms tick timer (samd SystemCoreClock may not correct) - SystemCoreClock = CONF_CPU_FREQUENCY; -#if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - // Led init -#ifdef LED_PIN - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - board_led_write(false); -#endif - - // Button init -#ifdef BUTTON_PIN - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULL_DOWN : GPIO_PULL_UP); -#endif - - uart_init(); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - /* USB Clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - _pm_enable_bus_clock(PM_BUS_APBB, USB); - _pm_enable_bus_clock(PM_BUS_AHB, USB); - _gclk_enable_channel(USB_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); - - // USB Pin Init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); - - // Output 500hz PWM on D12 (PA19 - TCC0 WO[3]) so we can validate the GCLK0 clock speed with a Saleae. - _pm_enable_bus_clock(PM_BUS_APBC, TCC0); - TCC0->PER.bit.PER = 48000000 / 1000; - TCC0->CC[3].bit.CC = 48000000 / 2000; - TCC0->CTRLA.bit.ENABLE = true; - - gpio_set_pin_function(PIN_PA19, PINMUX_PA19F_TCC0_WO3); - _gclk_enable_channel(TCC0_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); - -#if CFG_TUH_ENABLED - #if CFG_TUH_MAX3421 - max3421_init(); - #else - // VBUS Power - board_vbus_set(0, true); - #endif -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { - (void) state; -#ifdef LED_PIN - gpio_set_pin_level(LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); -#endif -} - -uint32_t board_button_read(void) { -#ifdef BUTTON_PIN - return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); -#else - return 0; -#endif -} - -#if defined(UART_SERCOM) - -#define BOARD_SERCOM2(n) SERCOM ## n -#define BOARD_SERCOM(n) BOARD_SERCOM2(n) - -static void uart_init(void) -{ -#if UART_SERCOM == 0 - #if UART_TX_PIN == 6 - gpio_set_pin_function(PIN_PA06, PINMUX_PA06D_SERCOM0_PAD2); - #elif UART_TX_PIN == 10 - gpio_set_pin_function(PIN_PA10, PINMUX_PA10C_SERCOM0_PAD2); - #else - #error "UART_TX_PIN not supported" - #endif - - #if UART_RX_PIN == 7 - gpio_set_pin_function(PIN_PA07, PINMUX_PA07D_SERCOM0_PAD3); - #elif UART_RX_PIN == 11 - gpio_set_pin_function(PIN_PA11, PINMUX_PA11C_SERCOM0_PAD3); - #else - #error "UART_RX_PIN not supported" -#endif - - // setup clock (48MHz) - _pm_enable_bus_clock(PM_BUS_APBC, SERCOM0); - _gclk_enable_channel(SERCOM0_GCLK_ID_CORE, GCLK_CLKCTRL_GEN_GCLK0_Val); - - SERCOM0->USART.CTRLA.bit.SWRST = 1; /* reset SERCOM & enable config */ - while(SERCOM0->USART.SYNCBUSY.bit.SWRST); - - SERCOM0->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ - SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ -// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(3) | /* pad 3 */ - SERCOM_USART_CTRLA_TXPO(1); /* pad 2 */ - - SERCOM0->USART.CTRLB.reg = - SERCOM_USART_CTRLB_TXEN | /* tx enabled */ - SERCOM_USART_CTRLB_RXEN; /* rx enabled */ - - /* 115200 */ - SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); - - SERCOM0->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -#endif -} - -static inline void uart_send_buffer(uint8_t const *text, size_t len) -{ - for (size_t i = 0; i < len; ++i) { - BOARD_SERCOM(UART_SERCOM)->USART.DATA.reg = text[i]; - while((BOARD_SERCOM(UART_SERCOM)->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); - } -} - -static inline void uart_send_str(const char* text) -{ - while (*text) { - BOARD_SERCOM(UART_SERCOM)->USART.DATA.reg = *text++; - while((BOARD_SERCOM(UART_SERCOM)->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); - } -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - if (len < 0) { - uart_send_str(buf); - } else { - uart_send_buffer(buf, len); - } - return len; -} - -#else // ! defined(UART_SERCOM) - -static void uart_init(void) { -} - -int board_uart_read(uint8_t* buf, int len) { - (void) buf; - (void) len; - return 0; -} - -int board_uart_write(void const* buf, int len) { - (void) buf; - (void) len; - return 0; -} - -#endif - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} - -#endif - -//--------------------------------------------------------------------+ -// -//--------------------------------------------------------------------+ -#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 - -static void max3421_init(void) { - //------------- SPI Init -------------// - // MAX3421E max SPI clock is 26MHz however SAMD can only work reliably at 12 Mhz - uint32_t const baudrate = 12000000u; - - // Enable the APB clock for SERCOM - PM->APBCMASK.reg |= 1u << (PM_APBCMASK_SERCOM0_Pos + MAX3421_SERCOM_ID); - - // Configure GCLK for SERCOM -// GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_SERCOM4_CORE | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_CLKEN; - GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID(GCLK_CLKCTRL_ID_SERCOM0_CORE_Val + MAX3421_SERCOM_ID) | - GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_CLKEN; - while (GCLK->STATUS.bit.SYNCBUSY); - - Sercom* sercom = MAX3421_SERCOM; - - // Disable the SPI module - sercom->SPI.CTRLA.bit.ENABLE = 0; - - // Reset the SPI module - sercom->SPI.CTRLA.bit.SWRST = 1; - while (sercom->SPI.SYNCBUSY.bit.SWRST); - - // Set up SPI in master mode, MSB first, SPI mode 0 - sercom->SPI.CTRLA.reg = SERCOM_SPI_CTRLA_DOPO(MAX3421_TX_PAD) | SERCOM_SPI_CTRLA_DIPO(MAX3421_RX_PAD) | - SERCOM_SPI_CTRLA_MODE(3); - - sercom->SPI.CTRLB.reg = SERCOM_SPI_CTRLB_CHSIZE(0) | SERCOM_SPI_CTRLB_RXEN; - while (sercom->SPI.SYNCBUSY.bit.CTRLB == 1); - - // Set the baud rate - sercom->SPI.BAUD.reg = (uint8_t) (SystemCoreClock / (2 * baudrate) - 1); - - // Configure PA12 as MOSI (PAD0), PA13 as SCK (PAD1), PA14 as MISO (PAD2), function C (sercom) - gpio_set_pin_direction(MAX3421_SCK_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_pull_mode(MAX3421_SCK_PIN, GPIO_PULL_OFF); - gpio_set_pin_function(MAX3421_SCK_PIN, MAX3421_SERCOM_FUNCTION); - - gpio_set_pin_direction(MAX3421_MOSI_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_pull_mode(MAX3421_MOSI_PIN, GPIO_PULL_OFF); - gpio_set_pin_function(MAX3421_MOSI_PIN, MAX3421_SERCOM_FUNCTION); - - gpio_set_pin_direction(MAX3421_MISO_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(MAX3421_MISO_PIN, GPIO_PULL_OFF); - gpio_set_pin_function(MAX3421_MISO_PIN, MAX3421_SERCOM_FUNCTION); - - // CS pin - gpio_set_pin_direction(MAX3421_CS_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_level(MAX3421_CS_PIN, 1); - - // Enable the SPI module - sercom->SPI.CTRLA.bit.ENABLE = 1; - while (sercom->SPI.SYNCBUSY.bit.ENABLE); - - //------------- External Interrupt -------------// - - // Enable the APB clock for EIC (External Interrupt Controller) - PM->APBAMASK.reg |= PM_APBAMASK_EIC; - - // Configure GCLK for EIC - GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_EIC | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_CLKEN; - while (GCLK->STATUS.bit.SYNCBUSY); - - // Configure PA20 as an input with function A (external interrupt) - gpio_set_pin_direction(MAX3421_INTR_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(MAX3421_INTR_PIN, GPIO_PULL_UP); - gpio_set_pin_function(MAX3421_INTR_PIN, 0); - - // Disable EIC - EIC->CTRL.bit.ENABLE = 0; - while (EIC->STATUS.bit.SYNCBUSY); - - // Configure EIC to trigger on falling edge - uint8_t const sense_shift = MAX3421_INTR_EIC_ID * 4; - EIC->CONFIG[0].reg &= ~(7 << sense_shift); - EIC->CONFIG[0].reg |= 2 << sense_shift; - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(EIC_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - // Enable External Interrupt - EIC->INTENSET.reg = EIC_INTENSET_EXTINT(1 << MAX3421_INTR_EIC_ID); - - // Enable EIC - EIC->CTRL.bit.ENABLE = 1; - while (EIC->STATUS.bit.SYNCBUSY); -} - -void EIC_Handler(void) { - // Clear the interrupt flag - EIC->INTFLAG.reg = EIC_INTFLAG_EXTINT(1 << MAX3421_INTR_EIC_ID); - - // Call the TinyUSB interrupt handler - tuh_int_handler(1, true); -} - -// API to enable/disable MAX3421 INTR pin interrupt -void tuh_max3421_int_api(uint8_t rhport, bool enabled) { - (void) rhport; - - if (enabled) { - NVIC_EnableIRQ(EIC_IRQn); - } else { - NVIC_DisableIRQ(EIC_IRQn); - } -} - -// API to control MAX3421 SPI CS -void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) { - (void) rhport; - gpio_set_pin_level(MAX3421_CS_PIN, active ? 0 : 1); -} - -// API to transfer data with MAX3421 SPI -// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only -bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes) { - (void) rhport; - - Sercom* sercom = MAX3421_SERCOM; - - for (size_t count = 0; count < xfer_bytes; count++) { - // Wait for the transmit buffer to be empty - while (!sercom->SPI.INTFLAG.bit.DRE); - - // Write data to be transmitted - uint8_t data = 0x00; - if (tx_buf) { - data = tx_buf[count]; - } - - sercom->SPI.DATA.reg = (uint32_t) data; - - // Wait for the receive buffer to be filled - while (!sercom->SPI.INTFLAG.bit.RXC); - - // Read received data - data = (uint8_t) sercom->SPI.DATA.reg; - if (rx_buf) { - rx_buf[count] = data; - } - } - - // wait for bus idle and clear flags - while (!(sercom->SPI.INTFLAG.reg & (SERCOM_SPI_INTFLAG_TXC | SERCOM_SPI_INTFLAG_DRE))); - sercom->SPI.INTFLAG.reg = SERCOM_SPI_INTFLAG_TXC | SERCOM_SPI_INTFLAG_DRE; - - return true; -} - -#endif diff --git a/hw/bsp/samd21/family.cmake b/hw/bsp/samd21/family.cmake deleted file mode 100644 index 3c600318e..000000000 --- a/hw/bsp/samd21/family.cmake +++ /dev/null @@ -1,110 +0,0 @@ -include_guard() - -set(SDK_DIR ${TOP}/hw/mcu/microchip/samd21) - -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) - -set(FAMILY_MCUS SAMD21 CACHE INTERNAL "") -set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -f target/at91samdXX.cfg") - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_samd21.c) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/gcc/system_samd21.c - ${SDK_DIR}/hpl/gclk/hpl_gclk.c - ${SDK_DIR}/hpl/pm/hpl_pm.c - ${SDK_DIR}/hpl/sysctrl/hpl_sysctrl.c - ${SDK_DIR}/hal/src/hal_atomic.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR} - ${SDK_DIR}/config - ${SDK_DIR}/include - ${SDK_DIR}/hal/include - ${SDK_DIR}/hal/utils/include - ${SDK_DIR}/hpl/pm - ${SDK_DIR}/hpl/port - ${SDK_DIR}/hri - ${SDK_DIR}/CMSIS/Include - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - CONF_DFLL_OVERWRITE_CALIBRATION=0 - ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAMD21) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/microchip/samd/dcd_samd.c - ${TOP}/src/portable/microchip/samd/hcd_samd.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - #family_flash_openocd(${TARGET}) -endfunction() diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk deleted file mode 100644 index a2c37b2b6..000000000 --- a/hw/bsp/samd21/family.mk +++ /dev/null @@ -1,53 +0,0 @@ -UF2_FAMILY_ID = 0x68ed2b88 -SDK_DIR = hw/mcu/microchip/samd21 - -include $(TOP)/$(BOARD_PATH)/board.mk -CPU_CORE ?= cortex-m0plus - -CFLAGS += \ - -flto \ - -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ - -DCFG_TUSB_MCU=OPT_MCU_SAMD21 - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=redundant-decls - -# SAM driver is flooded with -Wcast-qual which slow down complication significantly -CFLAGS_SKIP += -Wcast-qual - -LDFLAGS_GCC += \ - -nostdlib -nostartfiles \ - --specs=nosys.specs --specs=nano.specs \ - -LDFLAGS_CLANG += - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - src/portable/microchip/samd/hcd_samd.c \ - ${SDK_DIR}/gcc/gcc/startup_samd21.c \ - ${SDK_DIR}/gcc/system_samd21.c \ - ${SDK_DIR}/hal/src/hal_atomic.c \ - ${SDK_DIR}/hpl/gclk/hpl_gclk.c \ - ${SDK_DIR}/hpl/pm/hpl_pm.c \ - ${SDK_DIR}/hpl/sysctrl/hpl_sysctrl.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/${SDK_DIR} \ - $(TOP)/${SDK_DIR}/config \ - $(TOP)/${SDK_DIR}/include \ - $(TOP)/${SDK_DIR}/hal/include \ - $(TOP)/${SDK_DIR}/hal/utils/include \ - $(TOP)/${SDK_DIR}/hpl/pm/ \ - $(TOP)/${SDK_DIR}/hpl/port \ - $(TOP)/${SDK_DIR}/hri \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - -# flash using bossac at least version 1.8 -# can be found in arduino15/packages/arduino/tools/bossac/ -# Add it to your PATH or change BOSSAC variable to match your installation -BOSSAC = bossac - -flash-bossac: $(BUILD)/$(PROJECT).bin - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/hw/bsp/samd2x_l2x/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd2x_l2x/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..6c9ecae2d --- /dev/null +++ b/hw/bsp/samd2x_l2x/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,153 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "sam.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 2 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.cmake b/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.cmake new file mode 100644 index 000000000..874b741cc --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.cmake @@ -0,0 +1,9 @@ +set(SAM_FAMILY saml21) +set(JLINK_DEVICE ATSAML21J18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/saml21j18b_flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAML21J18B__ + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.h b/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.h new file mode 100644 index 000000000..b93b4e591 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.h @@ -0,0 +1,55 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: SAML21 Xplained Pro + url: https://www.microchip.com/en-us/development-tool/atsaml21-xpro-b +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN (32 + 30) // PB30 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN (0 + 15) // PA15 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.mk b/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.mk new file mode 100644 index 000000000..4ebfa7e71 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/board.mk @@ -0,0 +1,12 @@ +SAM_FAMILY = saml21 + +CFLAGS += -D__SAML21J18B__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/saml21j18b_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAML21J18 + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/saml21j18b_flash.ld b/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/saml21j18b_flash.ld new file mode 100644 index 000000000..f9523451b --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/atsaml21_xpro/saml21j18b_flash.ld @@ -0,0 +1,155 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAML21J18B + * + * Copyright (c) 2016 Atmel Corporation, + * a wholly owned subsidiary of Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +ENTRY(Reset_Handler) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 + lpram (rwx) : ORIGIN = 0x30000000, LENGTH = 0x00002000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .lpram (NOLOAD): + { + . = ALIGN(8); + _slpram = .; + *(.lpram .lpram.*); + . = ALIGN(8); + _elpram = .; + } > lpram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.cmake b/hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.cmake new file mode 100644 index 000000000..dedc07594 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.cmake @@ -0,0 +1,10 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE ATSAMD21G18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21G18A__ + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.h b/hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.h new file mode 100644 index 000000000..bfe2d9951 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Adafruit Circuit Playground Express + url: https://www.adafruit.com/product/3333 +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 28 +#define BUTTON_STATE_ACTIVE 1 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.mk b/hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.mk new file mode 100644 index 000000000..f4211e6c8 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/circuitplayground_express/board.mk @@ -0,0 +1,11 @@ +SAM_FAMILY = samd21 + +CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +flash: flash-bossac diff --git a/hw/bsp/samd2x_l2x/boards/circuitplayground_express/circuitplayground_express.ld b/hw/bsp/samd2x_l2x/boards/circuitplayground_express/circuitplayground_express.ld new file mode 100644 index 000000000..ce7aff80b --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/circuitplayground_express/circuitplayground_express.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/curiosity_nano/board.cmake b/hw/bsp/samd2x_l2x/boards/curiosity_nano/board.cmake new file mode 100644 index 000000000..be744a130 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/curiosity_nano/board.cmake @@ -0,0 +1,11 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE atsamd21g17a) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/samd21g17a_flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21G17A__ + CFG_EXAMPLE_MSC_READONLY + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/curiosity_nano/board.h b/hw/bsp/samd2x_l2x/boards/curiosity_nano/board.h new file mode 100644 index 000000000..a2a7385a4 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/curiosity_nano/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: SAMD21 Curiosty Nano + url: https://www.microchip.com/en-us/development-tool/dm320119 +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN (32 + 10) // PB10 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN (0 + 11) // PB11 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 31 // CDC5_RX +#define UART_TX_PIN 37 // CDC5_TX + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/curiosity_nano/board.mk b/hw/bsp/samd2x_l2x/boards/curiosity_nano/board.mk new file mode 100644 index 000000000..b7ebc867e --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/curiosity_nano/board.mk @@ -0,0 +1,16 @@ +SAM_FAMILY = samd21 + +CFLAGS += -D__SAMD21G17A__ -DCFG_EXAMPLE_MSC_READONLY -DCFG_EXAMPLE_VIDEO_READONLY + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/samd21g17a_flash.ld + +# For flash-jlink target +JLINK_DEVICE = atsamd21g17a + +# flash using jlink (options are: jlink/cmsisdap/stlink/dfu) +#flash: flash-jlink + +PYOCD_TARGET = atsamd21g17a +PYOCD_OPTION = -O dap_protocol=swd +flash: flash-pyocd diff --git a/hw/bsp/samd2x_l2x/boards/curiosity_nano/samd21g17a_flash.ld b/hw/bsp/samd2x_l2x/boards/curiosity_nano/samd21g17a_flash.ld new file mode 100644 index 000000000..e03a4ce60 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/curiosity_nano/samd21g17a_flash.ld @@ -0,0 +1,144 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G17A/D + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00020000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00004000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x1000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/cynthion_d21/board.cmake b/hw/bsp/samd2x_l2x/boards/cynthion_d21/board.cmake new file mode 100644 index 000000000..ae739b215 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/cynthion_d21/board.cmake @@ -0,0 +1,13 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE ATSAMD21G18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/samd21g18a_flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21G18A__ + CFG_EXAMPLE_VIDEO_READONLY + ) + target_link_options(${TARGET} PUBLIC + "LINKER:--defsym=BOOTLOADER_SIZE=0x800" + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/cynthion_d21/board.h b/hw/bsp/samd2x_l2x/boards/cynthion_d21/board.h new file mode 100644 index 000000000..83782bc65 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/cynthion_d21/board.h @@ -0,0 +1,55 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Great Scott Gadgets Cynthion + url: https://greatscottgadgets.com/cynthion/ +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA22 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN PIN_PB22 +#define BUTTON_STATE_ACTIVE 0 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/cynthion_d21/board.mk b/hw/bsp/samd2x_l2x/boards/cynthion_d21/board.mk new file mode 100644 index 000000000..05ca9cb5d --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/cynthion_d21/board.mk @@ -0,0 +1,18 @@ +SAM_FAMILY = samd21 + +CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +LD_FILE = $(BOARD_PATH)/samd21g18a_flash.ld + +# Default bootloader size is now 2K, allow to specify other +ifeq ($(BOOTLOADER_SIZE), ) + BOOTLOADER_SIZE := 0x800 +endif +LDFLAGS += -Wl,--defsym=BOOTLOADER_SIZE=$(BOOTLOADER_SIZE) + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +# flash using dfu-util +flash: $(BUILD)/$(PROJECT).bin + dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< diff --git a/hw/bsp/samd2x_l2x/boards/cynthion_d21/samd21g18a_flash.ld b/hw/bsp/samd2x_l2x/boards/cynthion_d21/samd21g18a_flash.ld new file mode 100644 index 000000000..95d71b9e3 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/cynthion_d21/samd21g18a_flash.ld @@ -0,0 +1,144 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + BOOTLOADER_SIZE, LENGTH = 0x00040000 - BOOTLOADER_SIZE + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/feather_m0_express/board.cmake b/hw/bsp/samd2x_l2x/boards/feather_m0_express/board.cmake new file mode 100644 index 000000000..dedc07594 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/feather_m0_express/board.cmake @@ -0,0 +1,10 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE ATSAMD21G18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21G18A__ + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/feather_m0_express/board.h b/hw/bsp/samd2x_l2x/boards/feather_m0_express/board.h new file mode 100644 index 000000000..6fe13eb30 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/feather_m0_express/board.h @@ -0,0 +1,74 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Adafruit Feather M0 Express + url: https://www.adafruit.com/product/3403 +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +// SPI for USB host shield +#define MAX3421_SERCOM_ID 4 // SERCOM4 +#define MAX3421_SERCOM_FUNCTION 3 // function D (Sercom Alt) + +#define MAX3421_SCK_PIN (32+11) +#define MAX3421_MOSI_PIN (32+10) +#define MAX3421_MISO_PIN 12 +#define MAX3421_TX_PAD 1 // MOSI = PAD_2, SCK = PAD_3 +#define MAX3421_RX_PAD 0 // MISO = PAD_2 + +#define MAX3421_CS_PIN 18 // D10 + +#define MAX3421_INTR_PIN 7 // D10 +#define MAX3421_INTR_EIC_ID 7 // EIC7 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/feather_m0_express/board.mk b/hw/bsp/samd2x_l2x/boards/feather_m0_express/board.mk new file mode 100644 index 000000000..f4211e6c8 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/feather_m0_express/board.mk @@ -0,0 +1,11 @@ +SAM_FAMILY = samd21 + +CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +flash: flash-bossac diff --git a/hw/bsp/samd2x_l2x/boards/feather_m0_express/feather_m0_express.ld b/hw/bsp/samd2x_l2x/boards/feather_m0_express/feather_m0_express.ld new file mode 100644 index 000000000..ce7aff80b --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/feather_m0_express/feather_m0_express.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.cmake b/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.cmake new file mode 100644 index 000000000..dedc07594 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.cmake @@ -0,0 +1,10 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE ATSAMD21G18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21G18A__ + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.h b/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.h new file mode 100644 index 000000000..d901b2ea4 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Adafruit ItsyBitsy M0 + url: https://www.adafruit.com/product/3727 +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 21 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.mk b/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.mk new file mode 100644 index 000000000..f4211e6c8 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/board.mk @@ -0,0 +1,11 @@ +SAM_FAMILY = samd21 + +CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +flash: flash-bossac diff --git a/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/itsybitsy_m0.ld b/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/itsybitsy_m0.ld new file mode 100644 index 000000000..ce7aff80b --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/itsybitsy_m0/itsybitsy_m0.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/metro_m0_express/board.cmake b/hw/bsp/samd2x_l2x/boards/metro_m0_express/board.cmake new file mode 100644 index 000000000..dedc07594 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/metro_m0_express/board.cmake @@ -0,0 +1,10 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE ATSAMD21G18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21G18A__ + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/metro_m0_express/board.h b/hw/bsp/samd2x_l2x/boards/metro_m0_express/board.h new file mode 100644 index 000000000..726de3259 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/metro_m0_express/board.h @@ -0,0 +1,74 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Adafruit Metro M0 Express + url: https://www.adafruit.com/product/3505 +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 1 + +// Button: D5 +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +// SPI for USB host shield +#define MAX3421_SERCOM_ID 4 // SERCOM4 +#define MAX3421_SERCOM_FUNCTION 3 // function D (Sercom Alt) + +#define MAX3421_SCK_PIN (32+11) +#define MAX3421_MOSI_PIN (32+10) +#define MAX3421_MISO_PIN 12 +#define MAX3421_TX_PAD 1 // MOSI = PAD_2, SCK = PAD_3 +#define MAX3421_RX_PAD 0 // MISO = PAD_2 + +#define MAX3421_CS_PIN 18 // D10 + +#define MAX3421_INTR_PIN 7 // D9 +#define MAX3421_INTR_EIC_ID 7 // EIC7 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/metro_m0_express/board.mk b/hw/bsp/samd2x_l2x/boards/metro_m0_express/board.mk new file mode 100644 index 000000000..f4211e6c8 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/metro_m0_express/board.mk @@ -0,0 +1,11 @@ +SAM_FAMILY = samd21 + +CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +flash: flash-bossac diff --git a/hw/bsp/samd2x_l2x/boards/metro_m0_express/metro_m0_express.ld b/hw/bsp/samd2x_l2x/boards/metro_m0_express/metro_m0_express.ld new file mode 100644 index 000000000..ce7aff80b --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/metro_m0_express/metro_m0_express.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/qtpy/board.cmake b/hw/bsp/samd2x_l2x/boards/qtpy/board.cmake new file mode 100644 index 000000000..958944620 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/qtpy/board.cmake @@ -0,0 +1,10 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE ATSAMD21E18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21E18A__ + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/qtpy/board.h b/hw/bsp/samd2x_l2x/boards/qtpy/board.h new file mode 100644 index 000000000..b1cf338e4 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/qtpy/board.h @@ -0,0 +1,55 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Adafruit QT Py + url: https://www.adafruit.com/product/4600 +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED is neopixel, leave unset for now + +// Button is wired to reset + +// UART +#define UART_RX_PIN 8 +#define UART_TX_PIN 7 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/qtpy/board.mk b/hw/bsp/samd2x_l2x/boards/qtpy/board.mk new file mode 100644 index 000000000..4009c8a38 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/qtpy/board.mk @@ -0,0 +1,13 @@ +SAM_FAMILY = samd21 + +# For Adafruit QT Py board + +CFLAGS += -D__SAMD21E18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21E18 + +flash: flash-bossac diff --git a/hw/bsp/samd2x_l2x/boards/qtpy/qtpy.ld b/hw/bsp/samd2x_l2x/boards/qtpy/qtpy.ld new file mode 100644 index 000000000..ce7aff80b --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/qtpy/qtpy.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/saml22_feather/board.cmake b/hw/bsp/samd2x_l2x/boards/saml22_feather/board.cmake new file mode 100644 index 000000000..7fd79d2ce --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/saml22_feather/board.cmake @@ -0,0 +1,9 @@ +set(SAM_FAMILY saml22) +set(JLINK_DEVICE ATSAML22J18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAML22J18A__ + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/saml22_feather/board.h b/hw/bsp/samd2x_l2x/boards/saml22_feather/board.h new file mode 100644 index 000000000..f8660c3f8 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/saml22_feather/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: SAML22 Feather + url: https://github.com/joeycastillo/Feather-Projects/tree/main/SAML22%20Feather +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA08 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN PIN_PA06 +#define BUTTON_STATE_ACTIVE 0 + + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/saml22_feather/board.mk b/hw/bsp/samd2x_l2x/boards/saml22_feather/board.mk new file mode 100644 index 000000000..c7817ff70 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/saml22_feather/board.mk @@ -0,0 +1,11 @@ +SAM_FAMILY = saml22 + +CFLAGS += -D__SAML22J18A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAML22J18 + +flash: flash-bossac diff --git a/hw/bsp/samd2x_l2x/boards/saml22_feather/saml22_feather.ld b/hw/bsp/samd2x_l2x/boards/saml22_feather/saml22_feather.ld new file mode 100644 index 000000000..a04305be7 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/saml22_feather/saml22_feather.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAML22J18A + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +ENTRY(Reset_Handler) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.cmake b/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.cmake new file mode 100644 index 000000000..dedc07594 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.cmake @@ -0,0 +1,10 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE ATSAMD21G18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21G18A__ + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.h b/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.h new file mode 100644 index 000000000..1c434c68c --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Seeeduino XIAO + url: https://wiki.seeedstudio.com/Seeeduino-XIAO/ +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PIN 9 // PA4 pin D1 on seed input +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_RX_PIN 4 +#define UART_TX_PIN 5 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.mk b/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.mk new file mode 100644 index 000000000..0afe37f12 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/board.mk @@ -0,0 +1,11 @@ +SAM_FAMILY = samd21 + +CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/seeeduino_xiao.ld b/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/seeeduino_xiao.ld new file mode 100644 index 000000000..0d0c4e6c4 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/seeeduino_xiao/seeeduino_xiao.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K /* 8K offset to preserve bootloader */ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.cmake b/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.cmake new file mode 100644 index 000000000..67d26475f --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.cmake @@ -0,0 +1,9 @@ +set(SAM_FAMILY saml22) +set(JLINK_DEVICE ATSAML21J18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAML22J18A__ + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.h b/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.h new file mode 100644 index 000000000..502c799db --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: SensorWatch + url: https://github.com/joeycastillo/Sensor-Watch +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA21 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN PIN_PA22 +#define BUTTON_STATE_ACTIVE 1 + + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.mk b/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.mk new file mode 100644 index 000000000..c7817ff70 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/board.mk @@ -0,0 +1,11 @@ +SAM_FAMILY = saml22 + +CFLAGS += -D__SAML22J18A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAML22J18 + +flash: flash-bossac diff --git a/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/sensorwatch_m0.ld b/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/sensorwatch_m0.ld new file mode 100644 index 000000000..a04305be7 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/sensorwatch_m0/sensorwatch_m0.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAML22J18A + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +ENTRY(Reset_Handler) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.cmake b/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.cmake new file mode 100644 index 000000000..dedc07594 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.cmake @@ -0,0 +1,10 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE ATSAMD21G18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21G18A__ + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.h b/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.h new file mode 100644 index 000000000..a05cf5e4e --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.h @@ -0,0 +1,62 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: SparkFun SAMD21 Mini + url: https://www.sparkfun.com/products/13664 +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN 17 // PA17 (D13) +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN 14 // PA14 (D2) +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_SERCOM 0 +#define UART_RX_PIN 11 // PA11 D0 +#define UART_TX_PIN 10 // PA10 D1 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; + gpio_set_pin_direction(PIN_PA28, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA28, state); +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.mk b/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.mk new file mode 100644 index 000000000..f4211e6c8 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/board.mk @@ -0,0 +1,11 @@ +SAM_FAMILY = samd21 + +CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/$(BOARD).ld + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +flash: flash-bossac diff --git a/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/sparkfun_samd21_mini_usb.ld b/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/sparkfun_samd21_mini_usb.ld new file mode 100644 index 000000000..0754a8e9c --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/sparkfun_samd21_mini_usb/sparkfun_samd21_mini_usb.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000-0x0004 /* 4 bytes used by bootloader to keep data between resets */ +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/boards/trinket_m0/board.cmake b/hw/bsp/samd2x_l2x/boards/trinket_m0/board.cmake new file mode 100644 index 000000000..958944620 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/trinket_m0/board.cmake @@ -0,0 +1,10 @@ +set(SAM_FAMILY samd21) +set(JLINK_DEVICE ATSAMD21E18) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD21E18A__ + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/samd2x_l2x/boards/trinket_m0/board.h b/hw/bsp/samd2x_l2x/boards/trinket_m0/board.h new file mode 100644 index 000000000..01ad83089 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/trinket_m0/board.h @@ -0,0 +1,44 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021 Jean Gressmann + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* metadata: + name: Adafruit Trinket M0 + url: https://www.adafruit.com/product/3500 +*/ + +#pragma once + +// LED +#define LED_PIN 10 // PA10 +#define LED_STATE_ON 1 + +// UART +#define UART_SERCOM 0 +#define UART_RX_PIN 7 +#define UART_TX_PIN 6 + +static inline void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} diff --git a/hw/bsp/samd2x_l2x/boards/trinket_m0/board.mk b/hw/bsp/samd2x_l2x/boards/trinket_m0/board.mk new file mode 100644 index 000000000..201259288 --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/trinket_m0/board.mk @@ -0,0 +1,6 @@ +SAM_FAMILY = samd21 + +CFLAGS += -D__SAMD21E18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/trinket_m0.ld diff --git a/hw/bsp/samd2x_l2x/boards/trinket_m0/trinket_m0.ld b/hw/bsp/samd2x_l2x/boards/trinket_m0/trinket_m0.ld new file mode 100644 index 000000000..ce7aff80b --- /dev/null +++ b/hw/bsp/samd2x_l2x/boards/trinket_m0/trinket_m0.ld @@ -0,0 +1,146 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 0x00040000 - 8K + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd2x_l2x/family.c b/hw/bsp/samd2x_l2x/family.c new file mode 100644 index 000000000..67da1294e --- /dev/null +++ b/hw/bsp/samd2x_l2x/family.c @@ -0,0 +1,550 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: Microchip +*/ + +#include "sam.h" +#include "bsp/board_api.h" + +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-qual" +#endif + +#include "hal/include/hal_gpio.h" +#include "hal/include/hal_init.h" +#include "hpl/gclk/hpl_gclk_base.h" + +// SAMD21 specific includes +#if defined(__SAMD21E15A__) || defined(__SAMD21E16A__) || defined(__SAMD21E17A__) || defined(__SAMD21E18A__) || \ + defined(__SAMD21G15A__) || defined(__SAMD21G16A__) || defined(__SAMD21G17A__) || defined(__SAMD21G18A__) || \ + defined(__SAMD21J15A__) || defined(__SAMD21J16A__) || defined(__SAMD21J17A__) || defined(__SAMD21J18A__) + #define SAMD21_FAMILY + #include "hri/hri_nvmctrl_d21.h" + #include "hpl_pm_config.h" + #include "hpl/pm/hpl_pm_base.h" +#endif + +// SAML21/22 specific includes +#if defined(__SAML21E15B__) || defined(__SAML21E16B__) || defined(__SAML21E17B__) || defined(__SAML21E18B__) || \ + defined(__SAML21G16B__) || defined(__SAML21G17B__) || defined(__SAML21G18B__) || \ + defined(__SAML21J16B__) || defined(__SAML21J17B__) || defined(__SAML21J18B__) || \ + defined(__SAML22G16A__) || defined(__SAML22G17A__) || defined(__SAML22G18A__) || \ + defined(__SAML22J16A__) || defined(__SAML22J17A__) || defined(__SAML22J18A__) || \ + defined(__SAML22N16A__) || defined(__SAML22N17A__) || defined(__SAML22N18A__) + #define SAML2X_FAMILY + #include "hpl_mclk_config.h" +#endif + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "board.h" + +// board_vbus_set is defined in board.h for boards that support it +#if !defined(board_vbus_set) + #define board_vbus_set(rhport, state) do { (void)(rhport); (void)(state); } while(0) +#endif + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +#ifdef SAMD21_FAMILY +/* Referenced GCLKs, should be initialized firstly */ +#define _GCLK_INIT_1ST (1 << 0 | 1 << 1) +/* Not referenced GCLKs, initialized last */ +#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST) +#endif + +#ifdef SAML2X_FAMILY +/* Referenced GCLKs (out of 0~4), should be initialized firstly */ +#define _GCLK_INIT_1ST 0x00000000 +/* Not referenced GCLKs, initialized last */ +#define _GCLK_INIT_LAST 0x0000001F +#endif + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_Handler(void) { +#if CFG_TUD_ENABLED + tud_int_handler(0); +#endif + +#if CFG_TUH_ENABLED && !CFG_TUH_MAX3421 + tuh_int_handler(0); +#endif +} + +//--------------------------------------------------------------------+ +// Implementation +//--------------------------------------------------------------------+ +static void uart_init(void); + +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +#define MAX3421_SERCOM TU_XSTRCAT(SERCOM, MAX3421_SERCOM_ID) +static void max3421_init(void); +#endif + +void board_init(void) { +#ifdef SAMD21_FAMILY + // Clock init for SAMD21 ( follow hpl_init.c ) + hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, 2); + + _pm_init(); + _sysctrl_init_sources(); +#if _GCLK_INIT_1ST + _gclk_init_generators_by_fref(_GCLK_INIT_1ST); +#endif + _sysctrl_init_referenced_generators(); + _gclk_init_generators_by_fref(_GCLK_INIT_LAST); +#endif + +#ifdef SAML2X_FAMILY + // Clock init for SAML2x ( follow hpl_init.c ) + hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, CONF_NVM_WAIT_STATE); + + _set_performance_level(2); + + _osc32kctrl_init_sources(); + _oscctrl_init_sources(); + _mclk_init(); +#if _GCLK_INIT_1ST + _gclk_init_generators_by_fref(_GCLK_INIT_1ST); +#endif + _oscctrl_init_referenced_generators(); + _gclk_init_generators_by_fref(_GCLK_INIT_LAST); + +#if (CONF_PORT_EVCTRL_PORT_0 | CONF_PORT_EVCTRL_PORT_1 | CONF_PORT_EVCTRL_PORT_2 | CONF_PORT_EVCTRL_PORT_3) + hri_port_set_EVCTRL_reg(PORT, 0, CONF_PORTA_EVCTRL); + hri_port_set_EVCTRL_reg(PORT, 1, CONF_PORTB_EVCTRL); +#endif +#endif + + // Update SystemCoreClock since it is hard coded with asf4 and not correct + // Init 1ms tick timer (samd SystemCoreClock may not correct) + SystemCoreClock = CONF_CPU_FREQUENCY; +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#endif + + // Led init +#ifdef LED_PIN + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + board_led_write(false); +#endif + + // Button init +#ifdef BUTTON_PIN + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULL_DOWN : GPIO_PULL_UP); +#endif + + uart_init(); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + /* USB Clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. */ +#ifdef SAMD21_FAMILY + _pm_enable_bus_clock(PM_BUS_APBB, USB); + _pm_enable_bus_clock(PM_BUS_AHB, USB); + _gclk_enable_channel(USB_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); +#endif + +#ifdef SAML2X_FAMILY + hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); + hri_mclk_set_AHBMASK_USB_bit(MCLK); + hri_mclk_set_APBBMASK_USB_bit(MCLK); +#endif + + // USB Pin Init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); + +#ifdef SAMD21_FAMILY + // Output 500hz PWM on D12 (PA19 - TCC0 WO[3]) so we can validate the GCLK0 clock speed with a Saleae. + _pm_enable_bus_clock(PM_BUS_APBC, TCC0); + TCC0->PER.bit.PER = 48000000 / 1000; + TCC0->CC[3].bit.CC = 48000000 / 2000; + TCC0->CTRLA.bit.ENABLE = true; + + gpio_set_pin_function(PIN_PA19, PINMUX_PA19F_TCC0_WO3); + _gclk_enable_channel(TCC0_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val); +#endif + +#if CFG_TUH_ENABLED + #if CFG_TUH_MAX3421 + max3421_init(); + #else + // VBUS Power + board_vbus_set(0, true); + #endif +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + (void) state; +#ifdef LED_PIN + gpio_set_pin_level(LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +#endif +} + +uint32_t board_button_read(void) { +#ifdef BUTTON_PIN + return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); +#else + return 0; +#endif +} + +#if defined(UART_SERCOM) + +#define BOARD_SERCOM2(n) SERCOM ## n +#define BOARD_SERCOM(n) BOARD_SERCOM2(n) + +static void uart_init(void) +{ +#if UART_SERCOM == 0 + #if UART_TX_PIN == 6 + gpio_set_pin_function(PIN_PA06, PINMUX_PA06D_SERCOM0_PAD2); + #elif UART_TX_PIN == 10 + gpio_set_pin_function(PIN_PA10, PINMUX_PA10C_SERCOM0_PAD2); + #else + #error "UART_TX_PIN not supported" + #endif + + #if UART_RX_PIN == 7 + gpio_set_pin_function(PIN_PA07, PINMUX_PA07D_SERCOM0_PAD3); + #elif UART_RX_PIN == 11 + gpio_set_pin_function(PIN_PA11, PINMUX_PA11C_SERCOM0_PAD3); + #else + #error "UART_RX_PIN not supported" +#endif + +#ifdef SAMD21_FAMILY + // setup clock (48MHz) + _pm_enable_bus_clock(PM_BUS_APBC, SERCOM0); + _gclk_enable_channel(SERCOM0_GCLK_ID_CORE, GCLK_CLKCTRL_GEN_GCLK0_Val); +#endif + +#ifdef SAML2X_FAMILY + // setup clock (48MHz) + hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM0_GCLK_ID_CORE, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); + hri_mclk_set_APBCMASK_SERCOM0_bit(MCLK); +#endif + + SERCOM0->USART.CTRLA.bit.SWRST = 1; /* reset SERCOM & enable config */ + while(SERCOM0->USART.SYNCBUSY.bit.SWRST); + + SERCOM0->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ + SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ +// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(3) | /* pad 3 */ + SERCOM_USART_CTRLA_TXPO(1); /* pad 2 */ + + SERCOM0->USART.CTRLB.reg = + SERCOM_USART_CTRLB_TXEN | /* tx enabled */ + SERCOM_USART_CTRLB_RXEN; /* rx enabled */ + + /* 115200 */ + SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); + + SERCOM0->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +#endif +} + +static inline void uart_send_buffer(uint8_t const *text, size_t len) +{ + for (size_t i = 0; i < len; ++i) { + BOARD_SERCOM(UART_SERCOM)->USART.DATA.reg = text[i]; + while((BOARD_SERCOM(UART_SERCOM)->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); + } +} + +static inline void uart_send_str(const char* text) +{ + while (*text) { + BOARD_SERCOM(UART_SERCOM)->USART.DATA.reg = *text++; + while((BOARD_SERCOM(UART_SERCOM)->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); + } +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + if (len < 0) { + uart_send_str(buf); + } else { + uart_send_buffer(buf, len); + } + return len; +} + +#else // ! defined(UART_SERCOM) + +static void uart_init(void) { +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#endif + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ +#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 + +static void max3421_init(void) { + //------------- SPI Init -------------// + // MAX3421E max SPI clock is 26MHz however SAMD can only work reliably at 12 Mhz + uint32_t const baudrate = 12000000u; + +#ifdef SAMD21_FAMILY + // Enable the APB clock for SERCOM + PM->APBCMASK.reg |= 1u << (PM_APBCMASK_SERCOM0_Pos + MAX3421_SERCOM_ID); + + // Configure GCLK for SERCOM + GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID(GCLK_CLKCTRL_ID_SERCOM0_CORE_Val + MAX3421_SERCOM_ID) | + GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_CLKEN; + while (GCLK->STATUS.bit.SYNCBUSY); +#endif + +#ifdef SAML2X_FAMILY + // Enable the APB clock for SERCOM + hri_mclk_set_APBCMASK_reg(MCLK, 1u << (MCLK_APBCMASK_SERCOM0_Pos + MAX3421_SERCOM_ID)); + + // Configure GCLK for SERCOM + hri_gclk_write_PCHCTRL_reg(GCLK, SERCOM0_GCLK_ID_CORE + MAX3421_SERCOM_ID, + GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); +#endif + + Sercom* sercom = MAX3421_SERCOM; + + // Disable the SPI module + sercom->SPI.CTRLA.bit.ENABLE = 0; + + // Reset the SPI module + sercom->SPI.CTRLA.bit.SWRST = 1; + while (sercom->SPI.SYNCBUSY.bit.SWRST); + + // Set up SPI in master mode, MSB first, SPI mode 0 + sercom->SPI.CTRLA.reg = SERCOM_SPI_CTRLA_DOPO(MAX3421_TX_PAD) | SERCOM_SPI_CTRLA_DIPO(MAX3421_RX_PAD) | + SERCOM_SPI_CTRLA_MODE(3); + + sercom->SPI.CTRLB.reg = SERCOM_SPI_CTRLB_CHSIZE(0) | SERCOM_SPI_CTRLB_RXEN; + while (sercom->SPI.SYNCBUSY.bit.CTRLB == 1); + + // Set the baud rate + sercom->SPI.BAUD.reg = (uint8_t) (SystemCoreClock / (2 * baudrate) - 1); + + // Configure SPI pins + gpio_set_pin_direction(MAX3421_SCK_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_pull_mode(MAX3421_SCK_PIN, GPIO_PULL_OFF); + gpio_set_pin_function(MAX3421_SCK_PIN, MAX3421_SERCOM_FUNCTION); + + gpio_set_pin_direction(MAX3421_MOSI_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_pull_mode(MAX3421_MOSI_PIN, GPIO_PULL_OFF); + gpio_set_pin_function(MAX3421_MOSI_PIN, MAX3421_SERCOM_FUNCTION); + + gpio_set_pin_direction(MAX3421_MISO_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(MAX3421_MISO_PIN, GPIO_PULL_OFF); + gpio_set_pin_function(MAX3421_MISO_PIN, MAX3421_SERCOM_FUNCTION); + + // CS pin + gpio_set_pin_direction(MAX3421_CS_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_level(MAX3421_CS_PIN, 1); + + // Enable the SPI module + sercom->SPI.CTRLA.bit.ENABLE = 1; + while (sercom->SPI.SYNCBUSY.bit.ENABLE); + + //------------- External Interrupt -------------// + +#ifdef SAMD21_FAMILY + // Enable the APB clock for EIC (External Interrupt Controller) + PM->APBAMASK.reg |= PM_APBAMASK_EIC; + + // Configure GCLK for EIC + GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_EIC | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_CLKEN; + while (GCLK->STATUS.bit.SYNCBUSY); +#endif + +#ifdef SAML2X_FAMILY + // Enable the APB clock for EIC + hri_mclk_set_APBAMASK_EIC_bit(MCLK); + + // Configure GCLK for EIC + hri_gclk_write_PCHCTRL_reg(GCLK, EIC_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); +#endif + + // Configure interrupt pin as an input with function A (external interrupt) + gpio_set_pin_direction(MAX3421_INTR_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(MAX3421_INTR_PIN, GPIO_PULL_UP); + gpio_set_pin_function(MAX3421_INTR_PIN, 0); + + // Disable EIC + EIC->CTRL.bit.ENABLE = 0; + while (EIC->STATUS.bit.SYNCBUSY); + + // Configure EIC to trigger on falling edge + uint8_t const sense_shift = MAX3421_INTR_EIC_ID * 4; + EIC->CONFIG[0].reg &= ~(7 << sense_shift); + EIC->CONFIG[0].reg |= 2 << sense_shift; + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(EIC_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + // Enable External Interrupt + EIC->INTENSET.reg = EIC_INTENSET_EXTINT(1 << MAX3421_INTR_EIC_ID); + + // Enable EIC + EIC->CTRL.bit.ENABLE = 1; + while (EIC->STATUS.bit.SYNCBUSY); +} + +void EIC_Handler(void) { + // Clear the interrupt flag + EIC->INTFLAG.reg = EIC_INTFLAG_EXTINT(1 << MAX3421_INTR_EIC_ID); + + // Call the TinyUSB interrupt handler + tuh_int_handler(1, true); +} + +// API to enable/disable MAX3421 INTR pin interrupt +void tuh_max3421_int_api(uint8_t rhport, bool enabled) { + (void) rhport; + + if (enabled) { + NVIC_EnableIRQ(EIC_IRQn); + } else { + NVIC_DisableIRQ(EIC_IRQn); + } +} + +// API to control MAX3421 SPI CS +void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) { + (void) rhport; + gpio_set_pin_level(MAX3421_CS_PIN, active ? 0 : 1); +} + +// API to transfer data with MAX3421 SPI +// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only +bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes) { + (void) rhport; + + Sercom* sercom = MAX3421_SERCOM; + + for (size_t count = 0; count < xfer_bytes; count++) { + // Wait for the transmit buffer to be empty + while (!sercom->SPI.INTFLAG.bit.DRE); + + // Write data to be transmitted + uint8_t data = 0x00; + if (tx_buf) { + data = tx_buf[count]; + } + + sercom->SPI.DATA.reg = (uint32_t) data; + + // Wait for the receive buffer to be filled + while (!sercom->SPI.INTFLAG.bit.RXC); + + // Read received data + data = (uint8_t) sercom->SPI.DATA.reg; + if (rx_buf) { + rx_buf[count] = data; + } + } + + // wait for bus idle and clear flags + while (!(sercom->SPI.INTFLAG.reg & (SERCOM_SPI_INTFLAG_TXC | SERCOM_SPI_INTFLAG_DRE))); + sercom->SPI.INTFLAG.reg = SERCOM_SPI_INTFLAG_TXC | SERCOM_SPI_INTFLAG_DRE; + + return true; +} + +#endif + +// Stub for libc init array (required by SAML21/SAML22) +#ifdef SAML2X_FAMILY +void _init(void); +void _init(void) { +} +#endif diff --git a/hw/bsp/samd2x_l2x/family.cmake b/hw/bsp/samd2x_l2x/family.cmake new file mode 100644 index 000000000..9f1b20800 --- /dev/null +++ b/hw/bsp/samd2x_l2x/family.cmake @@ -0,0 +1,164 @@ +include_guard() + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# Determine which SAM family based on board configuration +# SAM_FAMILY should be set by board.cmake (samd21, saml21, or saml22) +if(NOT DEFINED SAM_FAMILY) + # Default to samd21 if not specified for backward compatibility + set(SAM_FAMILY samd21) +endif() + +set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS SAMD21 SAML2X CACHE INTERNAL "") +set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -f target/at91samdXX.cfg") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + # Common sources for all SAM families + set(COMMON_SOURCES + ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c + ${SDK_DIR}/hal/src/hal_atomic.c + ${SDK_DIR}/hpl/gclk/hpl_gclk.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + # Family-specific sources + if(SAM_FAMILY STREQUAL "samd21") + list(APPEND COMMON_SOURCES + ${SDK_DIR}/hpl/pm/hpl_pm.c + ${SDK_DIR}/hpl/sysctrl/hpl_sysctrl.c + ) + else() + # SAML21/SAML22 + list(APPEND COMMON_SOURCES + ${SDK_DIR}/hpl/mclk/hpl_mclk.c + ${SDK_DIR}/hpl/osc32kctrl/hpl_osc32kctrl.c + ${SDK_DIR}/hpl/oscctrl/hpl_oscctrl.c + ${SDK_DIR}/hpl/pm/hpl_pm.c + ) + endif() + + add_library(${BOARD_TARGET} STATIC ${COMMON_SOURCES}) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR} + ${SDK_DIR}/config + ${SDK_DIR}/include + ${SDK_DIR}/hal/include + ${SDK_DIR}/hal/utils/include + ${SDK_DIR}/hpl/pm + ${SDK_DIR}/hpl/port + ${SDK_DIR}/hri + ${CMSIS_5}/CMSIS/Core/Include + ) + + # Family-specific compile definitions + if(SAM_FAMILY STREQUAL "samd21") + target_compile_definitions(${BOARD_TARGET} PUBLIC + CONF_DFLL_OVERWRITE_CALIBRATION=0 + ) + else() + # SAML21/SAML22 + target_compile_definitions(${BOARD_TARGET} PUBLIC + CONF_OSC32K_CALIB_ENABLE=0 + CFG_EXAMPLE_VIDEO_READONLY + ) + endif() + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Determine MCU option based on SAM_FAMILY + if(SAM_FAMILY STREQUAL "samd21") + set(MCU_OPTION OPT_MCU_SAMD21) + elseif(SAM_FAMILY STREQUAL "saml21") + set(MCU_OPTION OPT_MCU_SAML21) + elseif(SAM_FAMILY STREQUAL "saml22") + set(MCU_OPTION OPT_MCU_SAML22) + else() + message(FATAL_ERROR "Unknown SAM_FAMILY: ${SAM_FAMILY}") + endif() + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} ${MCU_OPTION}) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/microchip/samd/dcd_samd.c + ) + + # Add HCD support for SAMD21 (has host capability) + if(SAM_FAMILY STREQUAL "samd21") + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/microchip/samd/hcd_samd.c + ) + endif() + + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) + #family_flash_openocd(${TARGET}) +endfunction() diff --git a/hw/bsp/samd2x_l2x/family.mk b/hw/bsp/samd2x_l2x/family.mk new file mode 100644 index 000000000..dca440ddd --- /dev/null +++ b/hw/bsp/samd2x_l2x/family.mk @@ -0,0 +1,92 @@ +UF2_FAMILY_ID = 0x68ed2b88 + +include $(TOP)/$(BOARD_PATH)/board.mk + +# SAM_FAMILY should be set by board.mk (samd21, saml21, or saml22) +ifeq ($(SAM_FAMILY),) + # Default to samd21 if not specified for backward compatibility + SAM_FAMILY = samd21 +endif + +SDK_DIR = hw/mcu/microchip/$(SAM_FAMILY) +CPU_CORE ?= cortex-m0plus + +# Common CFLAGS +CFLAGS += \ + -flto \ + +# Family-specific CFLAGS +ifeq ($(SAM_FAMILY),samd21) + CFLAGS += \ + -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ + -DCFG_TUSB_MCU=OPT_MCU_SAMD21 +else + # SAML21/SAML22 + CFLAGS += \ + -DCONF_OSC32K_CALIB_ENABLE=0 \ + -DCFG_EXAMPLE_VIDEO_READONLY \ + + ifeq ($(SAM_FAMILY),saml21) + CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_SAML21 + else ifeq ($(SAM_FAMILY),saml22) + CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_SAML22 + endif +endif + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=redundant-decls + +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual + +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs \ + +LDFLAGS_CLANG += + +# Common source files +SRC_C += \ + src/portable/microchip/samd/dcd_samd.c \ + ${SDK_DIR}/gcc/gcc/startup_$(SAM_FAMILY).c \ + ${SDK_DIR}/gcc/system_$(SAM_FAMILY).c \ + ${SDK_DIR}/hal/src/hal_atomic.c \ + ${SDK_DIR}/hpl/gclk/hpl_gclk.c \ + +# Family-specific source files +ifeq ($(SAM_FAMILY),samd21) + SRC_C += \ + src/portable/microchip/samd/hcd_samd.c \ + ${SDK_DIR}/hpl/pm/hpl_pm.c \ + ${SDK_DIR}/hpl/sysctrl/hpl_sysctrl.c \ + +else + # SAML21/SAML22 + SRC_C += \ + ${SDK_DIR}/hpl/mclk/hpl_mclk.c \ + ${SDK_DIR}/hpl/osc32kctrl/hpl_osc32kctrl.c \ + ${SDK_DIR}/hpl/oscctrl/hpl_oscctrl.c \ + ${SDK_DIR}/hpl/pm/hpl_pm.c \ + +endif + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/${SDK_DIR} \ + $(TOP)/${SDK_DIR}/config \ + $(TOP)/${SDK_DIR}/include \ + $(TOP)/${SDK_DIR}/hal/include \ + $(TOP)/${SDK_DIR}/hal/utils/include \ + $(TOP)/${SDK_DIR}/hpl/pm/ \ + $(TOP)/${SDK_DIR}/hpl/port \ + $(TOP)/${SDK_DIR}/hri \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash-bossac: $(BUILD)/$(PROJECT).bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index 6c9ecae2d..000000000 --- a/hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "sam.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#if defined(__ARM_FP) && __ARM_FP >= 4 - #define configENABLE_FPU 1 -#else - #define configENABLE_FPU 0 -#endif -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS 2 - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .lpram (NOLOAD): - { - . = ALIGN(8); - _slpram = .; - *(.lpram .lpram.*); - . = ALIGN(8); - _elpram = .; - } > lpram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.cmake b/hw/bsp/saml2x/boards/saml22_feather/board.cmake deleted file mode 100644 index 7fd79d2ce..000000000 --- a/hw/bsp/saml2x/boards/saml22_feather/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(SAM_FAMILY saml22) -set(JLINK_DEVICE ATSAML22J18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAML22J18A__ - ) -endfunction() diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.h b/hw/bsp/saml2x/boards/saml22_feather/board.h deleted file mode 100644 index f8660c3f8..000000000 --- a/hw/bsp/saml2x/boards/saml22_feather/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: SAML22 Feather - url: https://github.com/joeycastillo/Feather-Projects/tree/main/SAML22%20Feather -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA08 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN PIN_PA06 -#define BUTTON_STATE_ACTIVE 0 - - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.mk b/hw/bsp/saml2x/boards/saml22_feather/board.mk deleted file mode 100644 index c7817ff70..000000000 --- a/hw/bsp/saml2x/boards/saml22_feather/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -SAM_FAMILY = saml22 - -CFLAGS += -D__SAML22J18A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAML22J18 - -flash: flash-bossac diff --git a/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld b/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld deleted file mode 100644 index a04305be7..000000000 --- a/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAML22J18A - * - * Copyright (c) 2018 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -ENTRY(Reset_Handler) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake b/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake deleted file mode 100644 index 67d26475f..000000000 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake +++ /dev/null @@ -1,9 +0,0 @@ -set(SAM_FAMILY saml22) -set(JLINK_DEVICE ATSAML21J18) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - __SAML22J18A__ - ) -endfunction() diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h deleted file mode 100644 index 502c799db..000000000 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: SensorWatch - url: https://github.com/joeycastillo/Sensor-Watch -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA21 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN PIN_PA22 -#define BUTTON_STATE_ACTIVE 1 - - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk b/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk deleted file mode 100644 index c7817ff70..000000000 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -SAM_FAMILY = saml22 - -CFLAGS += -D__SAML22J18A__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/$(BOARD).ld - -# For flash-jlink target -JLINK_DEVICE = ATSAML22J18 - -flash: flash-bossac diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld b/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld deleted file mode 100644 index a04305be7..000000000 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld +++ /dev/null @@ -1,146 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAML22J18A - * - * Copyright (c) 2018 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -ENTRY(Reset_Handler) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/saml2x/family.c b/hw/bsp/saml2x/family.c deleted file mode 100644 index 275dbbd2e..000000000 --- a/hw/bsp/saml2x/family.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Microchip -*/ - -#include "sam.h" - -// Suppress warning caused by mcu driver -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wcast-qual" -#endif - -#include "hal/include/hal_gpio.h" -#include "hal/include/hal_init.h" -#include "hpl/gclk/hpl_gclk_base.h" -#include "hpl_mclk_config.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#include "bsp/board_api.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_Handler(void) { - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -/* Referenced GCLKs (out of 0~4), should be initialized firstly */ -#define _GCLK_INIT_1ST 0x00000000 -/* Not referenced GCLKs, initialized last */ -#define _GCLK_INIT_LAST 0x0000001F - -void board_init(void) { - // Clock init ( follow hpl_init.c ) - hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, CONF_NVM_WAIT_STATE); - - _set_performance_level(2); - - _osc32kctrl_init_sources(); - _oscctrl_init_sources(); - _mclk_init(); -#if _GCLK_INIT_1ST - _gclk_init_generators_by_fref(_GCLK_INIT_1ST); -#endif - _oscctrl_init_referenced_generators(); - _gclk_init_generators_by_fref(_GCLK_INIT_LAST); - -#if (CONF_PORT_EVCTRL_PORT_0 | CONF_PORT_EVCTRL_PORT_1 | CONF_PORT_EVCTRL_PORT_2 | CONF_PORT_EVCTRL_PORT_3) - hri_port_set_EVCTRL_reg(PORT, 0, CONF_PORTA_EVCTRL); - hri_port_set_EVCTRL_reg(PORT, 1, CONF_PORTB_EVCTRL); -#endif - - // Update SystemCoreClock since it is hard coded with asf4 and not correct - // Init 1ms tick timer (samd SystemCoreClock may not correct) - SystemCoreClock = CONF_CPU_FREQUENCY; - SysTick_Config(CONF_CPU_FREQUENCY / 1000); - - // Led init - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_level(LED_PIN, !LED_STATE_ON); - - // Button init - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULL_DOWN : GPIO_PULL_UP); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - /* USB Clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); - hri_mclk_set_AHBMASK_USB_bit(MCLK); - hri_mclk_set_APBBMASK_USB_bit(MCLK); - - // USB Pin Init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP); - - // Output 500hz PWM on PB23 (TCC0 WO[3]) so we can validate the GCLK1 clock speed -// hri_mclk_set_APBCMASK_TCC0_bit(MCLK); -// TCC0->PER.bit.PER = 48000000 / 1000; -// TCC0->CC[3].bit.CC = 48000000 / 2000; -// TCC0->CTRLA.bit.ENABLE = true; -// -// gpio_set_pin_function(PIN_PB23, PINMUX_PB23F_TCC0_WO3); -// hri_gclk_write_PCHCTRL_reg(GCLK, TCC0_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) { - // button is active low - return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) { - (void) buf; - (void) len; - return 0; -} - -int board_uart_write(void const* buf, int len) { - (void) buf; - (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} - -#endif - -void _init(void); -void _init(void) { - -} diff --git a/hw/bsp/saml2x/family.cmake b/hw/bsp/saml2x/family.cmake deleted file mode 100644 index 49f2e3e75..000000000 --- a/hw/bsp/saml2x/family.cmake +++ /dev/null @@ -1,115 +0,0 @@ -include_guard() - -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY}) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) - -set(FAMILY_MCUS SAML21 SAML22 CACHE INTERNAL "") -set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -f target/at91samdXX.cfg") - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c - ${SDK_DIR}/hal/src/hal_atomic.c - ${SDK_DIR}/hpl/gclk/hpl_gclk.c - ${SDK_DIR}/hpl/mclk/hpl_mclk.c - ${SDK_DIR}/hpl/osc32kctrl/hpl_osc32kctrl.c - ${SDK_DIR}/hpl/oscctrl/hpl_oscctrl.c - ${SDK_DIR}/hpl/pm/hpl_pm.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR} - ${SDK_DIR}/config - ${SDK_DIR}/include - ${SDK_DIR}/hal/include - ${SDK_DIR}/hal/utils/include - ${SDK_DIR}/hpl/pm - ${SDK_DIR}/hpl/port - ${SDK_DIR}/hri - ${CMSIS_5}/CMSIS/Core/Include - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - CONF_OSC32K_CALIB_ENABLE=0 - CFG_EXAMPLE_VIDEO_READONLY - ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAML22) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/microchip/samd/dcd_samd.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - - - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - #family_flash_openocd(${TARGET}) -endfunction() diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk deleted file mode 100644 index 65dfe5032..000000000 --- a/hw/bsp/saml2x/family.mk +++ /dev/null @@ -1,53 +0,0 @@ -UF2_FAMILY_ID = 0x68ed2b88 -SDK_DIR = hw/mcu/microchip/$(SAM_FAMILY) - -include $(TOP)/$(BOARD_PATH)/board.mk -CPU_CORE ?= cortex-m0plus - -CFLAGS += \ - -flto \ - -DCONF_OSC32K_CALIB_ENABLE=0 \ - -DCFG_TUSB_MCU=OPT_MCU_SAML22 \ - -DCFG_EXAMPLE_VIDEO_READONLY \ - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=redundant-decls - -# SAM driver is flooded with -Wcast-qual which slow down complication significantly -CFLAGS_SKIP += -Wcast-qual - -LDFLAGS_GCC += \ - -nostdlib -nostartfiles \ - --specs=nosys.specs --specs=nano.specs \ - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - $(SDK_DIR)/gcc/gcc/startup_$(SAM_FAMILY).c \ - $(SDK_DIR)/gcc/system_$(SAM_FAMILY).c \ - $(SDK_DIR)/hal/src/hal_atomic.c \ - $(SDK_DIR)/hpl/gclk/hpl_gclk.c \ - $(SDK_DIR)/hpl/mclk/hpl_mclk.c \ - $(SDK_DIR)/hpl/osc32kctrl/hpl_osc32kctrl.c \ - $(SDK_DIR)/hpl/oscctrl/hpl_oscctrl.c \ - $(SDK_DIR)/hpl/pm/hpl_pm.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/${SDK_DIR} \ - $(TOP)/${SDK_DIR}/config \ - $(TOP)/${SDK_DIR}/include \ - $(TOP)/${SDK_DIR}/hal/include \ - $(TOP)/${SDK_DIR}/hal/utils/include \ - $(TOP)/${SDK_DIR}/hpl/pm/ \ - $(TOP)/${SDK_DIR}/hpl/port \ - $(TOP)/${SDK_DIR}/hri \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - -# flash using bossac at least version 1.8 -# can be found in arduino15/packages/arduino/tools/bossac/ -# Add it to your PATH or change BOSSAC variable to match your installation -BOSSAC = bossac - -flash-bossac: $(BUILD)/$(PROJECT).bin - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 1f8975e55..bb3ac4d76 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -146,8 +146,8 @@ //--------------------------------------------------------------------+ // Microchip //--------------------------------------------------------------------+ -#elif TU_CHECK_MCU(OPT_MCU_SAMD21, OPT_MCU_SAMD51, OPT_MCU_SAME5X) || \ - TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML21, OPT_MCU_SAML22) +#elif TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML2X, OPT_MCU_SAMD21) || \ + TU_CHECK_MCU(OPT_MCU_SAMD51, OPT_MCU_SAME5X) #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_SAMG) diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index 357aa1549..e43439f2a 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -26,10 +26,7 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_SAMD11 || CFG_TUSB_MCU == OPT_MCU_SAMD21 || \ - CFG_TUSB_MCU == OPT_MCU_SAMD51 || CFG_TUSB_MCU == OPT_MCU_SAME5X || \ - CFG_TUSB_MCU == OPT_MCU_SAML22 || CFG_TUSB_MCU == OPT_MCU_SAML21) +#if CFG_TUD_ENABLED && TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAMD21, OPT_MCU_SAML2X, OPT_MCU_SAMD51, OPT_MCU_SAME5X) #include "sam.h" #include "device/dcd.h" @@ -106,10 +103,8 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { return true; } -#if CFG_TUSB_MCU == OPT_MCU_SAMD51 || CFG_TUSB_MCU == OPT_MCU_SAME5X - -void dcd_int_enable(uint8_t rhport) -{ +#if TU_CHECK_MCU(OPT_MCU_SAMD51, OPT_MCU_SAME5X) +void dcd_int_enable(uint8_t rhport) { (void) rhport; NVIC_EnableIRQ(USB_0_IRQn); NVIC_EnableIRQ(USB_1_IRQn); @@ -117,8 +112,7 @@ void dcd_int_enable(uint8_t rhport) NVIC_EnableIRQ(USB_3_IRQn); } -void dcd_int_disable(uint8_t rhport) -{ +void dcd_int_disable(uint8_t rhport) { (void) rhport; NVIC_DisableIRQ(USB_3_IRQn); NVIC_DisableIRQ(USB_2_IRQn); @@ -126,17 +120,13 @@ void dcd_int_disable(uint8_t rhport) NVIC_DisableIRQ(USB_0_IRQn); } -#elif CFG_TUSB_MCU == OPT_MCU_SAMD11 || CFG_TUSB_MCU == OPT_MCU_SAMD21 || \ - CFG_TUSB_MCU == OPT_MCU_SAML22 || CFG_TUSB_MCU == OPT_MCU_SAML21 - -void dcd_int_enable(uint8_t rhport) -{ +#elif TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAMD21, OPT_MCU_SAML2X) +void dcd_int_enable(uint8_t rhport) { (void) rhport; NVIC_EnableIRQ(USB_IRQn); } -void dcd_int_disable(uint8_t rhport) -{ +void dcd_int_disable(uint8_t rhport) { (void) rhport; NVIC_DisableIRQ(USB_IRQn); } diff --git a/src/portable/microchip/samd/hcd_samd.c b/src/portable/microchip/samd/hcd_samd.c index 1f4b2b233..0de7ddeb6 100644 --- a/src/portable/microchip/samd/hcd_samd.c +++ b/src/portable/microchip/samd/hcd_samd.c @@ -26,11 +26,8 @@ #include "tusb_option.h" -#if CFG_TUH_ENABLED && \ - !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) && \ - (CFG_TUSB_MCU == OPT_MCU_SAMD11 || CFG_TUSB_MCU == OPT_MCU_SAMD21 || \ - CFG_TUSB_MCU == OPT_MCU_SAMD51 || CFG_TUSB_MCU == OPT_MCU_SAME5X || \ - CFG_TUSB_MCU == OPT_MCU_SAML22 || CFG_TUSB_MCU == OPT_MCU_SAML21) +#if CFG_TUH_ENABLED && !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) && \ + TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAMD21, OPT_MCU_SAML2X, OPT_MCU_SAMD51, OPT_MCU_SAME5X) #include "host/hcd.h" #include "sam.h" @@ -428,7 +425,7 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { return true; } -#if CFG_TUSB_MCU == OPT_MCU_SAMD51 || CFG_TUSB_MCU == OPT_MCU_SAME5X +#if TU_CHECK_MCU(OPT_MCU_SAMD51, OPT_MCU_SAME5X) // Enable USB interrupt void hcd_int_enable(uint8_t rhport) @@ -450,8 +447,7 @@ void hcd_int_disable(uint8_t rhport) NVIC_DisableIRQ(USB_0_IRQn); } -#elif CFG_TUSB_MCU == OPT_MCU_SAMD11 || CFG_TUSB_MCU == OPT_MCU_SAMD21 || \ - CFG_TUSB_MCU == OPT_MCU_SAML22 || CFG_TUSB_MCU == OPT_MCU_SAML21 +#elif TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAMD21, OPT_MCU_SAML2X) // Enable USB interrupt void hcd_int_enable(uint8_t rhport) diff --git a/src/tusb_option.h b/src/tusb_option.h index dd57f6296..9d5aed252 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -71,8 +71,9 @@ #define OPT_MCU_SAMG 202 ///< MicroChip SAMDG series #define OPT_MCU_SAME5X 203 ///< MicroChip SAM E5x #define OPT_MCU_SAMD11 204 ///< MicroChip SAMD11 -#define OPT_MCU_SAML22 205 ///< MicroChip SAML22 -#define OPT_MCU_SAML21 206 ///< MicroChip SAML21 +#define OPT_MCU_SAML2X 205 ///< MicroChip SAML2x +#define OPT_MCU_SAML21 OPT_MCU_SAML2X ///< SAML21 backward compatibility +#define OPT_MCU_SAML22 OPT_MCU_SAML2X ///< SAML22 backward compatibility #define OPT_MCU_SAMX7X 207 ///< MicroChip SAME70, S70, V70, V71 family // STM32 -- cgit v1.3.1 From 6a1117a8d85a6c029808a22ae53be1387ff2ce92 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 00:32:55 +0700 Subject: refactor sltb009a to family efm32 --- hw/bsp/efm32/FreeRTOSConfig/FreeRTOSConfig.h | 150 ++++++ hw/bsp/efm32/boards/sltb009a/board.cmake | 8 + hw/bsp/efm32/boards/sltb009a/board.h | 49 ++ hw/bsp/efm32/boards/sltb009a/board.mk | 9 + hw/bsp/efm32/family.c | 713 ++++++++++++++++++++++++++ hw/bsp/efm32/family.cmake | 107 ++++ hw/bsp/efm32/family.mk | 39 ++ hw/bsp/sltb009a/board.mk | 44 -- hw/bsp/sltb009a/sltb009a.c | 721 --------------------------- 9 files changed, 1075 insertions(+), 765 deletions(-) create mode 100644 hw/bsp/efm32/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/efm32/boards/sltb009a/board.cmake create mode 100644 hw/bsp/efm32/boards/sltb009a/board.h create mode 100644 hw/bsp/efm32/boards/sltb009a/board.mk create mode 100644 hw/bsp/efm32/family.c create mode 100644 hw/bsp/efm32/family.cmake create mode 100644 hw/bsp/efm32/family.mk delete mode 100644 hw/bsp/sltb009a/board.mk delete mode 100644 hw/bsp/sltb009a/sltb009a.c diff --git a/hw/bsp/efm32/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/efm32/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..0b3e7cd2d --- /dev/null +++ b/hw/bsp/efm32/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,150 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "em_device.h" +#endif + +/* Cortex-M4F port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +// EFM32GG12B has 3 priority bits +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<PWRCTRL = (immediate_switch ? EMU_PWRCTRL_IMMEDIATEPWRSWITCH : 0) | EMU_PWRCTRL_REGPWRSEL_DVDD | EMU_PWRCTRL_ANASW_AVDD; +} + +static void emu_reg_init(float target_voltage) +{ + if(target_voltage < 2300.f || target_voltage >= 3800.f) + return; + + uint8_t level = ((target_voltage - 2300.f) / 100.f); + + EMU->R5VCTRL = EMU_R5VCTRL_INPUTMODE_AUTO; + + EMU->R5VOUTLEVEL = level; /* Reg output to 3.3V*/ +} + +static void emu_dcdc_init(float target_voltage, float max_ln_current, float max_lp_current, float max_reverse_current) +{ + if(target_voltage < 1800.f || target_voltage >= 3000.f) + return; + + if(max_ln_current <= 0.f || max_ln_current > 200.f) + return; + + if(max_lp_current <= 0.f || max_lp_current > 10000.f) + return; + + if(max_reverse_current < 0.f || max_reverse_current > 160.f) + return; + + // Low Power & Low Noise current limit + uint8_t lp_bias = 0; + + if(max_lp_current < 75.f) + lp_bias = 0; + else if(max_lp_current < 500.f) + lp_bias = 1; + else if(max_lp_current < 2500.f) + lp_bias = 2; + else + lp_bias = 3; + + EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_LPCMPBIASEM234H_MASK) | ((uint32_t)lp_bias << _EMU_DCDCMISCCTRL_LPCMPBIASEM234H_SHIFT); + EMU->DCDCMISCCTRL |= EMU_DCDCMISCCTRL_LNFORCECCM; // Force CCM to prevent reverse current + EMU->DCDCLPCTRL |= EMU_DCDCLPCTRL_LPVREFDUTYEN; // Enable duty cycling of the bias for LP mode + EMU->DCDCLNFREQCTRL = (EMU->DCDCLNFREQCTRL & ~_EMU_DCDCLNFREQCTRL_RCOBAND_MASK) | 4; // Set RCO Band to 7MHz + + uint8_t fet_count = 0; + + if(max_ln_current < 20.f) + fet_count = 4; + else if(max_ln_current >= 20.f && max_ln_current < 40.f) + fet_count = 8; + else + fet_count = 16; + + EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_NFETCNT_MASK) | ((uint32_t)(fet_count - 1) << _EMU_DCDCMISCCTRL_NFETCNT_SHIFT); + EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_PFETCNT_MASK) | ((uint32_t)(fet_count - 1) << _EMU_DCDCMISCCTRL_PFETCNT_SHIFT); + + uint8_t ln_current_limit = (((max_ln_current + 40.f) * 1.5f) / (5.f * fet_count)) - 1; + uint8_t lp_current_limit = 1; // Recommended value + + EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~(_EMU_DCDCMISCCTRL_LNCLIMILIMSEL_MASK | _EMU_DCDCMISCCTRL_LPCLIMILIMSEL_MASK)) | ((uint32_t)ln_current_limit << _EMU_DCDCMISCCTRL_LNCLIMILIMSEL_SHIFT) | ((uint32_t)lp_current_limit << _EMU_DCDCMISCCTRL_LPCLIMILIMSEL_SHIFT); + + uint8_t z_det_limit = ((max_reverse_current + 40.f) * 1.5f) / (2.5f * fet_count); + + EMU->DCDCZDETCTRL = (EMU->DCDCZDETCTRL & ~_EMU_DCDCZDETCTRL_ZDETILIMSEL_MASK) | ((uint32_t)z_det_limit << _EMU_DCDCZDETCTRL_ZDETILIMSEL_SHIFT); + + EMU->DCDCCLIMCTRL |= EMU_DCDCCLIMCTRL_BYPLIMEN; // Enable bypass current limiter to prevent overcurrent when switching modes + + // Output Voltage + if(target_voltage > 1800.f) + { + float max_vout = 3000.f; + float min_vout = 1800.f; + float diff_vout = max_vout - min_vout; + + uint8_t ln_vref_high = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_3V0LNATT1_MASK) >> _DEVINFO_DCDCLNVCTRL0_3V0LNATT1_SHIFT; + uint8_t ln_vref_low = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V8LNATT1_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V8LNATT1_SHIFT; + + uint8_t ln_vref = ((target_voltage - min_vout) * (float)(ln_vref_high - ln_vref_low)) / diff_vout; + ln_vref += ln_vref_low; + + EMU->DCDCLNVCTRL = (ln_vref << _EMU_DCDCLNVCTRL_LNVREF_SHIFT) | EMU_DCDCLNVCTRL_LNATT; + + uint8_t lp_vref_low = 0; + uint8_t lp_vref_high = 0; + + switch(lp_bias) + { + case 0: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_SHIFT; + } + break; + case 1: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_SHIFT; + } + break; + case 2: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_SHIFT; + } + break; + case 3: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_SHIFT; + } + break; + } + + uint8_t lp_vref = ((target_voltage - min_vout) * (float)(lp_vref_high - lp_vref_low)) / diff_vout; + lp_vref += lp_vref_low; + + EMU->DCDCLPVCTRL = (lp_vref << _EMU_DCDCLPVCTRL_LPVREF_SHIFT) | EMU_DCDCLPVCTRL_LPATT; + } + else + { + float max_vout = 1800.f; + float min_vout = 1200.f; + float diff_vout = max_vout - min_vout; + + uint8_t ln_vref_high = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V8LNATT0_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V8LNATT0_SHIFT; + uint8_t ln_vref_low = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V2LNATT0_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V2LNATT0_SHIFT; + + uint8_t ln_vref = ((target_voltage - min_vout) * (float)(ln_vref_high - ln_vref_low)) / diff_vout; + ln_vref += ln_vref_low; + + EMU->DCDCLNVCTRL = ln_vref << _EMU_DCDCLNVCTRL_LNVREF_SHIFT; + + uint8_t lp_vref_low = 0; + uint8_t lp_vref_high = 0; + + switch(lp_bias) + { + case 0: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_SHIFT; + } + break; + case 1: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_SHIFT; + } + break; + case 2: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_SHIFT; + } + break; + case 3: + { + lp_vref_high = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_SHIFT; + lp_vref_low = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_SHIFT; + } + break; + } + + uint8_t lp_vref = ((target_voltage - min_vout) * (float)(lp_vref_high - lp_vref_low)) / diff_vout; + lp_vref += lp_vref_low; + + EMU->DCDCLPVCTRL = lp_vref << _EMU_DCDCLPVCTRL_LPVREF_SHIFT; + } + + EMU->DCDCLPCTRL = (EMU->DCDCLPCTRL & ~_EMU_DCDCLPCTRL_LPCMPHYSSELEM234H_MASK) | (((DEVINFO->DCDCLPCMPHYSSEL1 & (((uint32_t)0xFF) << (lp_bias * 8))) >> (lp_bias * 8)) << _EMU_DCDCLPCTRL_LPCMPHYSSELEM234H_SHIFT); + + while(EMU->DCDCSYNC & EMU_DCDCSYNC_DCDCCTRLBUSY); // Wait for configuration to write + + // Calibration + //EMU->DCDCLNCOMPCTRL = 0x57204077; // Compensation for 1uF DCDC capacitor + EMU->DCDCLNCOMPCTRL = 0xB7102137; // Compensation for 4.7uF DCDC capacitor + + // Enable DCDC converter + EMU->DCDCCTRL = EMU_DCDCCTRL_DCDCMODEEM4_EM4LOWPOWER | EMU_DCDCCTRL_DCDCMODEEM23_EM23LOWPOWER | EMU_DCDCCTRL_DCDCMODE_LOWNOISE; + + // Switch digital domain to DVDD + EMU->PWRCTRL = EMU_PWRCTRL_REGPWRSEL_DVDD | EMU_PWRCTRL_ANASW_AVDD; +} + +static void cmu_hfxo_startup_calib(uint16_t ib_trim, uint16_t c_tune) +{ + if(CMU->STATUS & CMU_STATUS_HFXOENS) + return; + + CMU->HFXOSTARTUPCTRL = (CMU->HFXOSTARTUPCTRL & ~(_CMU_HFXOSTARTUPCTRL_CTUNE_MASK | _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_MASK)) | (((uint32_t)c_tune << _CMU_HFXOSTARTUPCTRL_CTUNE_SHIFT) & _CMU_HFXOSTARTUPCTRL_CTUNE_MASK) | (((uint32_t)ib_trim << _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_SHIFT) & _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_MASK); +} + +static void cmu_hfxo_steady_calib(uint16_t ib_trim, uint16_t c_tune) +{ + if(CMU->STATUS & CMU_STATUS_HFXOENS) + return; + + CMU->HFXOSTEADYSTATECTRL = (CMU->HFXOSTEADYSTATECTRL & ~(_CMU_HFXOSTEADYSTATECTRL_CTUNE_MASK | _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_MASK)) | (((uint32_t)c_tune << _CMU_HFXOSTEADYSTATECTRL_CTUNE_SHIFT) & _CMU_HFXOSTEADYSTATECTRL_CTUNE_MASK) | (((uint32_t)ib_trim << _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_SHIFT) & _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_MASK); +} + +static void cmu_hfrco_calib(uint32_t calibration) +{ + if(CMU->STATUS & CMU_STATUS_DPLLENS) + return; + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_HFRCOBSY); + + CMU->HFRCOCTRL = calibration; + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_HFRCOBSY); +} + +static void cmu_ushfrco_calib(uint8_t enable, uint32_t calibration) +{ + if(CMU->USBCRCTRL & CMU_USBCRCTRL_USBCREN) + return; + + if(!enable) + { + CMU->OSCENCMD = CMU_OSCENCMD_USHFRCODIS; + while(CMU->STATUS & CMU_STATUS_USHFRCOENS); + + return; + } + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_USHFRCOBSY); + + CMU->USHFRCOCTRL = calibration | CMU_USHFRCOCTRL_FINETUNINGEN; + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_USHFRCOBSY); + + if(enable && !(CMU->STATUS & CMU_STATUS_USHFRCOENS)) + { + CMU->OSCENCMD = CMU_OSCENCMD_USHFRCOEN; + + while(!(CMU->STATUS & CMU_STATUS_USHFRCORDY)); + } +} + +static void cmu_auxhfrco_calib(uint8_t enable, uint32_t calibration) +{ + if(!enable) + { + CMU->OSCENCMD = CMU_OSCENCMD_AUXHFRCODIS; + while(CMU->STATUS & CMU_STATUS_AUXHFRCOENS); + + return; + } + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_AUXHFRCOBSY); + + CMU->AUXHFRCOCTRL = calibration; + + while(CMU->SYNCBUSY & CMU_SYNCBUSY_AUXHFRCOBSY); + + if(enable && !(CMU->STATUS & CMU_STATUS_AUXHFRCOENS)) + { + CMU->OSCENCMD = CMU_OSCENCMD_AUXHFRCOEN; + + while(!(CMU->STATUS & CMU_STATUS_AUXHFRCORDY)); + } +} + + +static void cmu_init(void) +{ + // Change SDIO clock to HFXO if HFRCO selected and disable it + CMU->SDIOCTRL = CMU_SDIOCTRL_SDIOCLKDIS | CMU_SDIOCTRL_SDIOCLKSEL_HFXO; + while(CMU->STATUS & CMU_STATUS_SDIOCLKENS); + + // Change QSPI clock to HFXO if HFRCO selected and disable it + CMU->QSPICTRL = CMU_QSPICTRL_QSPI0CLKDIS | CMU_QSPICTRL_QSPI0CLKSEL_HFXO; + while(CMU->STATUS & CMU_STATUS_QSPI0CLKENS); + + // Disable DPLL if enabled + if(CMU->STATUS & CMU_STATUS_DPLLENS) + { + CMU->OSCENCMD = CMU_OSCENCMD_DPLLDIS; + while(CMU->STATUS & CMU_STATUS_DPLLENS); + } + + // Disable HFXO if enabled + if(CMU->STATUS & CMU_STATUS_HFXOENS) + { + CMU->OSCENCMD = CMU_OSCENCMD_HFXODIS; + while(CMU->STATUS & CMU_STATUS_HFXOENS); + } + + // Setup HFXO + CMU->HFXOCTRL = CMU_HFXOCTRL_PEAKDETMODE_AUTOCMD | CMU_HFXOCTRL_MODE_XTAL; + CMU->HFXOCTRL1 = CMU_HFXOCTRL1_PEAKDETTHR_DEFAULT; + CMU->HFXOSTEADYSTATECTRL |= CMU_HFXOSTEADYSTATECTRL_PEAKMONEN; + CMU->HFXOTIMEOUTCTRL = (7 << _CMU_HFXOTIMEOUTCTRL_PEAKDETTIMEOUT_SHIFT) | (8 << _CMU_HFXOTIMEOUTCTRL_STEADYTIMEOUT_SHIFT) | (12 << _CMU_HFXOTIMEOUTCTRL_STARTUPTIMEOUT_SHIFT); + + // Enable HFXO and wait for it to be ready + CMU->OSCENCMD = CMU_OSCENCMD_HFXOEN; + while(!(CMU->STATUS & CMU_STATUS_HFXORDY)); + + // Switch main clock to HFXO and wait for it to be selected + CMU->HFCLKSEL = CMU_HFCLKSEL_HF_HFXO; + while((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) != CMU_HFCLKSTATUS_SELECTED_HFXO); + + // Calibrate HFRCO for 72MHz and enable tuning by PLL + cmu_hfrco_calib((DEVINFO->HFRCOCAL16) | CMU_HFRCOCTRL_FINETUNINGEN); + + // Setup the PLL + CMU->DPLLCTRL = CMU_DPLLCTRL_REFSEL_HFXO | CMU_DPLLCTRL_AUTORECOVER | CMU_DPLLCTRL_EDGESEL_RISE | CMU_DPLLCTRL_MODE_FREQLL; + // 72MHz = 50MHz (HFXO) * 1.44 (144/100) + CMU->DPLLCTRL1 = (143 << _CMU_DPLLCTRL1_N_SHIFT) | (99 << _CMU_DPLLCTRL1_M_SHIFT); // fHFRCO = fHFXO * (N + 1) / (M + 1) + + // Enable the DPLL and wait for it to be ready + CMU->OSCENCMD = CMU_OSCENCMD_DPLLEN; + while(!(CMU->STATUS & CMU_STATUS_DPLLRDY)); + + // Config peripherals for the new frequency (freq > 32MHz) + CMU->CTRL |= CMU_CTRL_WSHFLE; + + // Set prescalers + CMU->HFPRESC = CMU_HFPRESC_HFCLKLEPRESC_DIV2 | CMU_HFPRESC_PRESC_NODIVISION; + CMU->HFBUSPRESC = 1 << _CMU_HFBUSPRESC_PRESC_SHIFT; + CMU->HFCOREPRESC = 0 << _CMU_HFCOREPRESC_PRESC_SHIFT; + CMU->HFPERPRESC = 1 << _CMU_HFPERPRESC_PRESC_SHIFT; + CMU->HFEXPPRESC = 0 << _CMU_HFEXPPRESC_PRESC_SHIFT; + CMU->HFPERPRESCB = 0 << _CMU_HFPERPRESCB_PRESC_SHIFT; + CMU->HFPERPRESCC = 1 << _CMU_HFPERPRESCC_PRESC_SHIFT; + + // Enable clock to peripherals + CMU->CTRL |= CMU_CTRL_HFPERCLKEN; + + // Switch main clock to HFRCO and wait for it to be selected + CMU->HFCLKSEL = CMU_HFCLKSEL_HF_HFRCO; + while((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) != CMU_HFCLKSTATUS_SELECTED_HFRCO); + + // LFA Clock + CMU->LFACLKSEL = CMU_LFACLKSEL_LFA_LFRCO; + + // LFB Clock + CMU->LFBCLKSEL = CMU_LFBCLKSEL_LFB_LFRCO; + + // LFC Clock + CMU->LFCCLKSEL = CMU_LFCCLKSEL_LFC_LFRCO; + + // LFE Clock + CMU->LFECLKSEL = CMU_LFECLKSEL_LFE_ULFRCO; +} + +static void systick_init(void) +{ + SysTick->LOAD = (72000000 / 1000) - 1; + SysTick->VAL = 0; + SysTick->CTRL = SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk | SysTick_CTRL_CLKSOURCE_Msk; + + SCB->SHP[11] = 7 << (8 - __NVIC_PRIO_BITS); // Set priority 3,1 (min) +} + +static void gpio_init(void) +{ + CMU->HFBUSCLKEN0 |= CMU_HFBUSCLKEN0_GPIO; + + // NC - Not Connected (not available in mcu package) + // NR - Not routed (no routing to pin on pcb, floating) + // NU - Not used (not currently in use) + + // Port A + GPIO->P[0].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[0].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NU + | GPIO_P_MODEL_MODE1_DISABLED // NU + | GPIO_P_MODEL_MODE2_DISABLED // NU + | GPIO_P_MODEL_MODE3_DISABLED // NU + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NU + | GPIO_P_MODEL_MODE7_DISABLED; // NC + GPIO->P[0].MODEH = GPIO_P_MODEH_MODE8_DISABLED // GPIO - MIC_ENABLE + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // NC + | GPIO_P_MODEH_MODE11_DISABLED // NC + | GPIO_P_MODEH_MODE12_WIREDAND // LED0R + | GPIO_P_MODEH_MODE13_WIREDAND // LED0B + | GPIO_P_MODEH_MODE14_WIREDAND // LED0G + | GPIO_P_MODEH_MODE15_DISABLED; // NU + GPIO->P[0].DOUT = 0x7000; // Leds off By default + GPIO->P[0].OVTDIS = 0; + + // Port B + GPIO->P[1].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[1].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC + | GPIO_P_MODEL_MODE1_DISABLED // NC + | GPIO_P_MODEL_MODE2_DISABLED // NC + | GPIO_P_MODEL_MODE3_DISABLED // NU + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NU + | GPIO_P_MODEL_MODE7_DISABLED; // MAIN_LFXTAL_P + GPIO->P[1].MODEH = GPIO_P_MODEH_MODE8_DISABLED // MAIN_LFXTAL_N + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // NC + | GPIO_P_MODEH_MODE11_DISABLED // PDM_DAT0 - MIC_DATA + | GPIO_P_MODEH_MODE12_DISABLED // PDM_CLK - MIC_CLOCK + | GPIO_P_MODEH_MODE13_DISABLED // MAIN_HFXTAL_P + | GPIO_P_MODEH_MODE14_DISABLED // MAIN_HFXTAL_N + | GPIO_P_MODEH_MODE15_DISABLED; // NC + GPIO->P[1].DOUT = 0; + GPIO->P[1].OVTDIS = 0; + + // Port C + GPIO->P[2].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (7 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[2].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC + | GPIO_P_MODEL_MODE1_DISABLED // NC + | GPIO_P_MODEL_MODE2_DISABLED // NC + | GPIO_P_MODEL_MODE3_DISABLED // NC + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NC + | GPIO_P_MODEL_MODE7_DISABLED; // NC + GPIO->P[2].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NC + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // NC + | GPIO_P_MODEH_MODE11_DISABLED // NC + | GPIO_P_MODEH_MODE12_DISABLED // NC + | GPIO_P_MODEH_MODE13_DISABLED // NC + | GPIO_P_MODEH_MODE14_DISABLED // NC + | GPIO_P_MODEH_MODE15_DISABLED; // NC + GPIO->P[2].DOUT = 0; + GPIO->P[2].OVTDIS = 0; + + // Port D + GPIO->P[3].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[3].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NU + | GPIO_P_MODEL_MODE1_DISABLED // NU + | GPIO_P_MODEL_MODE2_DISABLED // NU + | GPIO_P_MODEL_MODE3_DISABLED // NU + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_INPUT // GPIO - BTN0 + | GPIO_P_MODEL_MODE6_WIREDAND // LED1R + | GPIO_P_MODEL_MODE7_DISABLED; // NU + GPIO->P[3].MODEH = GPIO_P_MODEH_MODE8_INPUT // GPIO - BTN1 + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // NC + | GPIO_P_MODEH_MODE11_DISABLED // NC + | GPIO_P_MODEH_MODE12_DISABLED // NC + | GPIO_P_MODEH_MODE13_DISABLED // NC + | GPIO_P_MODEH_MODE14_DISABLED // NC + | GPIO_P_MODEH_MODE15_DISABLED; // NC + GPIO->P[3].DOUT = 0; + GPIO->P[3].OVTDIS = 0; + + // Port E + GPIO->P[4].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[4].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC + | GPIO_P_MODEL_MODE1_DISABLED // NC + | GPIO_P_MODEL_MODE2_DISABLED // NC + | GPIO_P_MODEL_MODE3_DISABLED // NC + | GPIO_P_MODEL_MODE4_DISABLED // NU + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NU + | GPIO_P_MODEL_MODE7_DISABLED; // NU + GPIO->P[4].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NU + | GPIO_P_MODEH_MODE9_DISABLED // NU + | GPIO_P_MODEH_MODE10_DISABLED // NU + | GPIO_P_MODEH_MODE11_DISABLED // NU + | GPIO_P_MODEH_MODE12_WIREDAND // LED1B + | GPIO_P_MODEH_MODE13_DISABLED // NU + | GPIO_P_MODEH_MODE14_DISABLED // NU + | GPIO_P_MODEH_MODE15_DISABLED; // NU + GPIO->P[4].DOUT = 0; + GPIO->P[4].OVTDIS = 0; + + // Port F + GPIO->P[5].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) + | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); + GPIO->P[5].MODEL = GPIO_P_MODEL_MODE0_PUSHPULL // SWCLK + | GPIO_P_MODEL_MODE1_PUSHPULL // SWDIO + | GPIO_P_MODEL_MODE2_PUSHPULL // SWO + | GPIO_P_MODEL_MODE3_DISABLED // NC + | GPIO_P_MODEL_MODE4_DISABLED // NC + | GPIO_P_MODEL_MODE5_DISABLED // NU + | GPIO_P_MODEL_MODE6_DISABLED // NC + | GPIO_P_MODEL_MODE7_DISABLED; // NC + GPIO->P[5].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NC + | GPIO_P_MODEH_MODE9_DISABLED // NC + | GPIO_P_MODEH_MODE10_DISABLED // USB N + | GPIO_P_MODEH_MODE11_DISABLED // USB P + | GPIO_P_MODEH_MODE12_WIREDAND // LED1G + | GPIO_P_MODEH_MODE13_DISABLED // NC + | GPIO_P_MODEH_MODE14_DISABLED // NC + | GPIO_P_MODEH_MODE15_DISABLED; // NC + GPIO->P[5].DOUT = 0; + + GPIO->P[5].OVTDIS = 0; + + // Debugger Route + GPIO->ROUTEPEN &= ~(GPIO_ROUTEPEN_TDIPEN | GPIO_ROUTEPEN_TDOPEN); // Disable JTAG + GPIO->ROUTEPEN |= GPIO_ROUTEPEN_SWVPEN; // Enable SWO + GPIO->ROUTELOC0 = GPIO_ROUTELOC0_SWVLOC_LOC0; // SWO on PF2 + + // External interrupts + GPIO->EXTIPSELL = GPIO_EXTIPSELL_EXTIPSEL0_PORTE // NU + | GPIO_EXTIPSELL_EXTIPSEL1_PORTB // NU + | GPIO_EXTIPSELL_EXTIPSEL2_PORTB // NU + | GPIO_EXTIPSELL_EXTIPSEL3_PORTB // NU + | GPIO_EXTIPSELL_EXTIPSEL4_PORTA // NU + | GPIO_EXTIPSELL_EXTIPSEL5_PORTA // NU + | GPIO_EXTIPSELL_EXTIPSEL6_PORTC // NU + | GPIO_EXTIPSELL_EXTIPSEL7_PORTC; // NU + GPIO->EXTIPSELH = GPIO_EXTIPSELH_EXTIPSEL8_PORTA // NU + | GPIO_EXTIPSELH_EXTIPSEL9_PORTE // NU + | GPIO_EXTIPSELH_EXTIPSEL10_PORTF // NU + | GPIO_EXTIPSELH_EXTIPSEL11_PORTA // NU + | GPIO_EXTIPSELH_EXTIPSEL12_PORTA // NU + | GPIO_EXTIPSELH_EXTIPSEL13_PORTE // NU + | GPIO_EXTIPSELH_EXTIPSEL14_PORTF // NU + | GPIO_EXTIPSELH_EXTIPSEL15_PORTA; // NU + + GPIO->EXTIPINSELL = GPIO_EXTIPINSELL_EXTIPINSEL0_PIN3 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL1_PIN1 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL2_PIN2 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL3_PIN3 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL4_PIN6 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL5_PIN7 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL6_PIN4 // NU + | GPIO_EXTIPINSELL_EXTIPINSEL7_PIN7; // NU + GPIO->EXTIPINSELH = GPIO_EXTIPINSELH_EXTIPINSEL8_PIN8 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL9_PIN9 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL10_PIN11 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL11_PIN8 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL12_PIN13 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL13_PIN15 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL14_PIN12 // NU + | GPIO_EXTIPINSELH_EXTIPINSEL15_PIN12; // NU + +} + +/*--------------------------------------------------------------------*/ +/* Board Init */ +/*--------------------------------------------------------------------*/ + +void board_init(void) +{ + + emu_dcdc_init(1800.f, 50.f, 100.f, 0.f); // Init DC-DC converter (1.8 V, 50 mA active, 100 uA sleep, 0 mA reverse limit) + emu_init(0); + emu_reg_init(3300.f); // set output regulator to 3.3V + + cmu_hfxo_startup_calib(0x200, 0x145); // Config HFXO Startup for 1280 uA, 36 pF (18 pF + 2 pF CLOAD) + cmu_hfxo_steady_calib(0x009, 0x145); // Config HFXO Steady for 12 uA, 36 pF (18 pF + 2 pF CLOAD) + + cmu_init(); // Init Clock Management Unit + + cmu_ushfrco_calib(1, DEVINFO->USHFRCOCAL13); // Enable and calibrate USHFRCO for 48 MHz + cmu_auxhfrco_calib(1, DEVINFO->AUXHFRCOCAL11); // Enable and calibrate AUXHFRCO for 32 MHz + + CMU->USBCRCTRL = CMU_USBCRCTRL_USBCREN; // enable USB clock recovery + CMU->USBCTRL = CMU_USBCTRL_USBCLKSEL_USHFRCO | CMU_USBCTRL_USBCLKEN; // select USHFRCO as USB Phy clock source and enable it + + CMU->HFBUSCLKEN0 |= CMU_HFBUSCLKEN0_USB; // enable USB peripheral clock + + systick_init(); // Init system tick + + gpio_init(); // Init IOs + +} + +/*--------------------------------------------------------------------*/ +/* Board porting API */ +/*--------------------------------------------------------------------*/ + +void board_led_write(bool state) +{ + // Combine red and blue for pink Because it looks good :) + GPIO->P[LED_PORT].DOUT = (GPIO->P[LED_PORT].DOUT & ~((1 << LED_PIN_R) | (1 << LED_PIN_B))) | (state << LED_PIN_R) | (state << LED_PIN_B); +} + +uint32_t board_button_read(void) +{ + return !!(GPIO->P[BUTTON_PORT].DIN & (1 << BUTTON_PIN)); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(char *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/hw/bsp/efm32/family.cmake b/hw/bsp/efm32/family.cmake new file mode 100644 index 000000000..f5afd6fe4 --- /dev/null +++ b/hw/bsp/efm32/family.cmake @@ -0,0 +1,107 @@ +include_guard() + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# EFM32_FAMILY should be set by board.cmake (e.g. efm32gg12b) +string(TOUPPER ${EFM32_FAMILY} EFM32_FAMILY_UPPER) +set(SILABS_CMSIS ${TOP}/hw/mcu/silabs/cmsis-dfp-${EFM32_FAMILY}/Device/SiliconLabs/${EFM32_FAMILY_UPPER}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS EFM32GG CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(LD_FILE_GNU ${SILABS_CMSIS}/Source/GCC/${EFM32_FAMILY}.ld) + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + set(STARTUP_FILE_GNU ${SILABS_CMSIS}/Source/GCC/startup_${EFM32_FAMILY}.S) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SILABS_CMSIS}/Source/system_${EFM32_FAMILY}.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_5}/CMSIS/Core/Include + ${SILABS_CMSIS}/Include + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + __STARTUP_CLEAR_BSS + __START=main + ${EFM32_MCU} + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_EFM32GG) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/efm32/family.mk b/hw/bsp/efm32/family.mk new file mode 100644 index 000000000..f115b6bd4 --- /dev/null +++ b/hw/bsp/efm32/family.mk @@ -0,0 +1,39 @@ +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -D__STARTUP_CLEAR_BSS \ + -D__START=main \ + -DCFG_TUSB_MCU=OPT_MCU_EFM32GG + +CPU_CORE ?= cortex-m4 + +# EFM32_FAMILY should be set by board.mk (e.g. efm32gg12b) +SILABS_CMSIS = hw/mcu/silabs/cmsis-dfp-$(EFM32_FAMILY)/Device/SiliconLabs/$(shell echo $(EFM32_FAMILY) | tr a-z A-Z) + +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + +# All source paths should be relative to the top level. +LD_FILE = $(SILABS_CMSIS)/Source/GCC/$(EFM32_FAMILY).ld + +SRC_C += \ + $(SILABS_CMSIS)/Source/system_$(EFM32_FAMILY).c \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ + +SRC_S += \ + $(SILABS_CMSIS)/Source/GCC/startup_$(EFM32_FAMILY).S + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(SILABS_CMSIS)/Include \ + $(TOP)/$(BOARD_PATH) + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F diff --git a/hw/bsp/sltb009a/board.mk b/hw/bsp/sltb009a/board.mk deleted file mode 100644 index 5dd7a158f..000000000 --- a/hw/bsp/sltb009a/board.mk +++ /dev/null @@ -1,44 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__STARTUP_CLEAR_BSS \ - -D__START=main \ - -DEFM32GG12B810F1024GM64 \ - -DCFG_TUSB_MCU=OPT_MCU_EFM32GG - -# mcu driver cause following warnings -#CFLAGS += -Wno-error=unused-parameter - -SILABS_FAMILY = efm32gg12b -SILABS_CMSIS = hw/mcu/silabs/cmsis-dfp-$(SILABS_FAMILY)/Device/SiliconLabs/$(shell echo $(SILABS_FAMILY) | tr a-z A-Z) - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = $(SILABS_CMSIS)/Source/GCC/$(SILABS_FAMILY).ld - -SRC_C += \ - $(SILABS_CMSIS)/Source/system_$(SILABS_FAMILY).c \ - src/portable/synopsys/dwc2/dcd_dwc2.c \ - src/portable/synopsys/dwc2/hcd_dwc2.c \ - src/portable/synopsys/dwc2/dwc2_common.c \ - -SRC_S += \ - $(SILABS_CMSIS)/Source/GCC/startup_$(SILABS_FAMILY).S - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(SILABS_CMSIS)/Include \ - $(TOP)/hw/bsp/$(BOARD) - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = EFM32GG12B810F1024 - -flash: flash-jlink diff --git a/hw/bsp/sltb009a/sltb009a.c b/hw/bsp/sltb009a/sltb009a.c deleted file mode 100644 index 23ef6d7cd..000000000 --- a/hw/bsp/sltb009a/sltb009a.c +++ /dev/null @@ -1,721 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021 Rafael Silva (@perigoso) - * Copyright (c) 2021 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board_api.h" - -#include "em_device.h" - -/*--------------------------------------------------------------------*/ -/* MACRO TYPEDEF CONSTANT ENUM */ -/*--------------------------------------------------------------------*/ - -#define LED_PORT 0 // A -#define LED_PIN_R 12 // 12 -#define LED_PIN_B 13 // 13 -#define LED_PIN_G 14 // 14 -#define LED_STATE_ON 0 // active-low - -#define BUTTON_PORT 3 // D -#define BUTTON_PIN 5 // 5 -#define BUTTON_STATE_ACTIVE 0 // active-low - -/*--------------------------------------------------------------------*/ -/* Forward USB interrupt events to TinyUSB IRQ Handler */ -/*--------------------------------------------------------------------*/ - -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -/*--------------------------------------------------------------------*/ -/* Fault Handlers */ -/*--------------------------------------------------------------------*/ - -void HardFault_Handler(void) -{ - asm("bkpt"); -} - -void MemManage_Handler(void) -{ - asm("bkpt"); -} - -void BusFault_Handler(void) -{ - asm("bkpt"); -} - -void UsageFault_Handler(void) -{ - asm("bkpt"); -} - -/*--------------------------------------------------------------------*/ -/* Startup */ -/*--------------------------------------------------------------------*/ - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} - -/*--------------------------------------------------------------------*/ -/* Initing Funcs */ -/*--------------------------------------------------------------------*/ - -void emu_init(uint8_t immediate_switch) -{ - EMU->PWRCTRL = (immediate_switch ? EMU_PWRCTRL_IMMEDIATEPWRSWITCH : 0) | EMU_PWRCTRL_REGPWRSEL_DVDD | EMU_PWRCTRL_ANASW_AVDD; -} - -void emu_reg_init(float target_voltage) -{ - if(target_voltage < 2300.f || target_voltage >= 3800.f) - return; - - uint8_t level = ((target_voltage - 2300.f) / 100.f); - - EMU->R5VCTRL = EMU_R5VCTRL_INPUTMODE_AUTO; - - EMU->R5VOUTLEVEL = level; /* Reg output to 3.3V*/ -} - -void emu_dcdc_init(float target_voltage, float max_ln_current, float max_lp_current, float max_reverse_current) -{ - if(target_voltage < 1800.f || target_voltage >= 3000.f) - return; - - if(max_ln_current <= 0.f || max_ln_current > 200.f) - return; - - if(max_lp_current <= 0.f || max_lp_current > 10000.f) - return; - - if(max_reverse_current < 0.f || max_reverse_current > 160.f) - return; - - // Low Power & Low Noise current limit - uint8_t lp_bias = 0; - - if(max_lp_current < 75.f) - lp_bias = 0; - else if(max_lp_current < 500.f) - lp_bias = 1; - else if(max_lp_current < 2500.f) - lp_bias = 2; - else - lp_bias = 3; - - EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_LPCMPBIASEM234H_MASK) | ((uint32_t)lp_bias << _EMU_DCDCMISCCTRL_LPCMPBIASEM234H_SHIFT); - EMU->DCDCMISCCTRL |= EMU_DCDCMISCCTRL_LNFORCECCM; // Force CCM to prevent reverse current - EMU->DCDCLPCTRL |= EMU_DCDCLPCTRL_LPVREFDUTYEN; // Enable duty cycling of the bias for LP mode - EMU->DCDCLNFREQCTRL = (EMU->DCDCLNFREQCTRL & ~_EMU_DCDCLNFREQCTRL_RCOBAND_MASK) | 4; // Set RCO Band to 7MHz - - uint8_t fet_count = 0; - - if(max_ln_current < 20.f) - fet_count = 4; - else if(max_ln_current >= 20.f && max_ln_current < 40.f) - fet_count = 8; - else - fet_count = 16; - - EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_NFETCNT_MASK) | ((uint32_t)(fet_count - 1) << _EMU_DCDCMISCCTRL_NFETCNT_SHIFT); - EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~_EMU_DCDCMISCCTRL_PFETCNT_MASK) | ((uint32_t)(fet_count - 1) << _EMU_DCDCMISCCTRL_PFETCNT_SHIFT); - - uint8_t ln_current_limit = (((max_ln_current + 40.f) * 1.5f) / (5.f * fet_count)) - 1; - uint8_t lp_current_limit = 1; // Recommended value - - EMU->DCDCMISCCTRL = (EMU->DCDCMISCCTRL & ~(_EMU_DCDCMISCCTRL_LNCLIMILIMSEL_MASK | _EMU_DCDCMISCCTRL_LPCLIMILIMSEL_MASK)) | ((uint32_t)ln_current_limit << _EMU_DCDCMISCCTRL_LNCLIMILIMSEL_SHIFT) | ((uint32_t)lp_current_limit << _EMU_DCDCMISCCTRL_LPCLIMILIMSEL_SHIFT); - - uint8_t z_det_limit = ((max_reverse_current + 40.f) * 1.5f) / (2.5f * fet_count); - - EMU->DCDCZDETCTRL = (EMU->DCDCZDETCTRL & ~_EMU_DCDCZDETCTRL_ZDETILIMSEL_MASK) | ((uint32_t)z_det_limit << _EMU_DCDCZDETCTRL_ZDETILIMSEL_SHIFT); - - EMU->DCDCCLIMCTRL |= EMU_DCDCCLIMCTRL_BYPLIMEN; // Enable bypass current limiter to prevent overcurrent when switching modes - - // Output Voltage - if(target_voltage > 1800.f) - { - float max_vout = 3000.f; - float min_vout = 1800.f; - float diff_vout = max_vout - min_vout; - - uint8_t ln_vref_high = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_3V0LNATT1_MASK) >> _DEVINFO_DCDCLNVCTRL0_3V0LNATT1_SHIFT; - uint8_t ln_vref_low = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V8LNATT1_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V8LNATT1_SHIFT; - - uint8_t ln_vref = ((target_voltage - min_vout) * (float)(ln_vref_high - ln_vref_low)) / diff_vout; - ln_vref += ln_vref_low; - - EMU->DCDCLNVCTRL = (ln_vref << _EMU_DCDCLNVCTRL_LNVREF_SHIFT) | EMU_DCDCLNVCTRL_LNATT; - - uint8_t lp_vref_low = 0; - uint8_t lp_vref_high = 0; - - switch(lp_bias) - { - case 0: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_SHIFT; - } - break; - case 1: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL2 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_SHIFT; - } - break; - case 2: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_SHIFT; - } - break; - case 3: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL3 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_SHIFT; - } - break; - } - - uint8_t lp_vref = ((target_voltage - min_vout) * (float)(lp_vref_high - lp_vref_low)) / diff_vout; - lp_vref += lp_vref_low; - - EMU->DCDCLPVCTRL = (lp_vref << _EMU_DCDCLPVCTRL_LPVREF_SHIFT) | EMU_DCDCLPVCTRL_LPATT; - } - else - { - float max_vout = 1800.f; - float min_vout = 1200.f; - float diff_vout = max_vout - min_vout; - - uint8_t ln_vref_high = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V8LNATT0_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V8LNATT0_SHIFT; - uint8_t ln_vref_low = (DEVINFO->DCDCLNVCTRL0 & _DEVINFO_DCDCLNVCTRL0_1V2LNATT0_MASK) >> _DEVINFO_DCDCLNVCTRL0_1V2LNATT0_SHIFT; - - uint8_t ln_vref = ((target_voltage - min_vout) * (float)(ln_vref_high - ln_vref_low)) / diff_vout; - ln_vref += ln_vref_low; - - EMU->DCDCLNVCTRL = ln_vref << _EMU_DCDCLNVCTRL_LNVREF_SHIFT; - - uint8_t lp_vref_low = 0; - uint8_t lp_vref_high = 0; - - switch(lp_bias) - { - case 0: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS0_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS0_SHIFT; - } - break; - case 1: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_3V0LPATT1LPCMPBIAS1_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL0 & _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_MASK) >> _DEVINFO_DCDCLPVCTRL2_1V8LPATT1LPCMPBIAS1_SHIFT; - } - break; - case 2: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS2_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS2_SHIFT; - } - break; - case 3: - { - lp_vref_high = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_3V0LPATT1LPCMPBIAS3_SHIFT; - lp_vref_low = (DEVINFO->DCDCLPVCTRL1 & _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_MASK) >> _DEVINFO_DCDCLPVCTRL3_1V8LPATT1LPCMPBIAS3_SHIFT; - } - break; - } - - uint8_t lp_vref = ((target_voltage - min_vout) * (float)(lp_vref_high - lp_vref_low)) / diff_vout; - lp_vref += lp_vref_low; - - EMU->DCDCLPVCTRL = lp_vref << _EMU_DCDCLPVCTRL_LPVREF_SHIFT; - } - - EMU->DCDCLPCTRL = (EMU->DCDCLPCTRL & ~_EMU_DCDCLPCTRL_LPCMPHYSSELEM234H_MASK) | (((DEVINFO->DCDCLPCMPHYSSEL1 & (((uint32_t)0xFF) << (lp_bias * 8))) >> (lp_bias * 8)) << _EMU_DCDCLPCTRL_LPCMPHYSSELEM234H_SHIFT); - - while(EMU->DCDCSYNC & EMU_DCDCSYNC_DCDCCTRLBUSY); // Wait for configuration to write - - // Calibration - //EMU->DCDCLNCOMPCTRL = 0x57204077; // Compensation for 1uF DCDC capacitor - EMU->DCDCLNCOMPCTRL = 0xB7102137; // Compensation for 4.7uF DCDC capacitor - - // Enable DCDC converter - EMU->DCDCCTRL = EMU_DCDCCTRL_DCDCMODEEM4_EM4LOWPOWER | EMU_DCDCCTRL_DCDCMODEEM23_EM23LOWPOWER | EMU_DCDCCTRL_DCDCMODE_LOWNOISE; - - // Switch digital domain to DVDD - EMU->PWRCTRL = EMU_PWRCTRL_REGPWRSEL_DVDD | EMU_PWRCTRL_ANASW_AVDD; -} - -void cmu_hfxo_startup_calib(uint16_t ib_trim, uint16_t c_tune) -{ - if(CMU->STATUS & CMU_STATUS_HFXOENS) - return; - - CMU->HFXOSTARTUPCTRL = (CMU->HFXOSTARTUPCTRL & ~(_CMU_HFXOSTARTUPCTRL_CTUNE_MASK | _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_MASK)) | (((uint32_t)c_tune << _CMU_HFXOSTARTUPCTRL_CTUNE_SHIFT) & _CMU_HFXOSTARTUPCTRL_CTUNE_MASK) | (((uint32_t)ib_trim << _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_SHIFT) & _CMU_HFXOSTARTUPCTRL_IBTRIMXOCORE_MASK); -} - -void cmu_hfxo_steady_calib(uint16_t ib_trim, uint16_t c_tune) -{ - if(CMU->STATUS & CMU_STATUS_HFXOENS) - return; - - CMU->HFXOSTEADYSTATECTRL = (CMU->HFXOSTEADYSTATECTRL & ~(_CMU_HFXOSTEADYSTATECTRL_CTUNE_MASK | _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_MASK)) | (((uint32_t)c_tune << _CMU_HFXOSTEADYSTATECTRL_CTUNE_SHIFT) & _CMU_HFXOSTEADYSTATECTRL_CTUNE_MASK) | (((uint32_t)ib_trim << _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_SHIFT) & _CMU_HFXOSTEADYSTATECTRL_IBTRIMXOCORE_MASK); -} - -void cmu_hfrco_calib(uint32_t calibration) -{ - if(CMU->STATUS & CMU_STATUS_DPLLENS) - return; - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_HFRCOBSY); - - CMU->HFRCOCTRL = calibration; - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_HFRCOBSY); -} - -void cmu_ushfrco_calib(uint8_t enable, uint32_t calibration) -{ - if(CMU->USBCRCTRL & CMU_USBCRCTRL_USBCREN) - return; - - if(!enable) - { - CMU->OSCENCMD = CMU_OSCENCMD_USHFRCODIS; - while(CMU->STATUS & CMU_STATUS_USHFRCOENS); - - return; - } - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_USHFRCOBSY); - - CMU->USHFRCOCTRL = calibration | CMU_USHFRCOCTRL_FINETUNINGEN; - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_USHFRCOBSY); - - if(enable && !(CMU->STATUS & CMU_STATUS_USHFRCOENS)) - { - CMU->OSCENCMD = CMU_OSCENCMD_USHFRCOEN; - - while(!(CMU->STATUS & CMU_STATUS_USHFRCORDY)); - } -} - -void cmu_auxhfrco_calib(uint8_t enable, uint32_t calibration) -{ - if(!enable) - { - CMU->OSCENCMD = CMU_OSCENCMD_AUXHFRCODIS; - while(CMU->STATUS & CMU_STATUS_AUXHFRCOENS); - - return; - } - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_AUXHFRCOBSY); - - CMU->AUXHFRCOCTRL = calibration; - - while(CMU->SYNCBUSY & CMU_SYNCBUSY_AUXHFRCOBSY); - - if(enable && !(CMU->STATUS & CMU_STATUS_AUXHFRCOENS)) - { - CMU->OSCENCMD = CMU_OSCENCMD_AUXHFRCOEN; - - while(!(CMU->STATUS & CMU_STATUS_AUXHFRCORDY)); - } -} - - -void cmu_init(void) -{ - // Change SDIO clock to HFXO if HFRCO selected and disable it - CMU->SDIOCTRL = CMU_SDIOCTRL_SDIOCLKDIS | CMU_SDIOCTRL_SDIOCLKSEL_HFXO; - while(CMU->STATUS & CMU_STATUS_SDIOCLKENS); - - // Change QSPI clock to HFXO if HFRCO selected and disable it - CMU->QSPICTRL = CMU_QSPICTRL_QSPI0CLKDIS | CMU_QSPICTRL_QSPI0CLKSEL_HFXO; - while(CMU->STATUS & CMU_STATUS_QSPI0CLKENS); - - // Disable DPLL if enabled - if(CMU->STATUS & CMU_STATUS_DPLLENS) - { - CMU->OSCENCMD = CMU_OSCENCMD_DPLLDIS; - while(CMU->STATUS & CMU_STATUS_DPLLENS); - } - - // Disable HFXO if enabled - if(CMU->STATUS & CMU_STATUS_HFXOENS) - { - CMU->OSCENCMD = CMU_OSCENCMD_HFXODIS; - while(CMU->STATUS & CMU_STATUS_HFXOENS); - } - - // Setup HFXO - CMU->HFXOCTRL = CMU_HFXOCTRL_PEAKDETMODE_AUTOCMD | CMU_HFXOCTRL_MODE_XTAL; - CMU->HFXOCTRL1 = CMU_HFXOCTRL1_PEAKDETTHR_DEFAULT; - CMU->HFXOSTEADYSTATECTRL |= CMU_HFXOSTEADYSTATECTRL_PEAKMONEN; - CMU->HFXOTIMEOUTCTRL = (7 << _CMU_HFXOTIMEOUTCTRL_PEAKDETTIMEOUT_SHIFT) | (8 << _CMU_HFXOTIMEOUTCTRL_STEADYTIMEOUT_SHIFT) | (12 << _CMU_HFXOTIMEOUTCTRL_STARTUPTIMEOUT_SHIFT); - - // Enable HFXO and wait for it to be ready - CMU->OSCENCMD = CMU_OSCENCMD_HFXOEN; - while(!(CMU->STATUS & CMU_STATUS_HFXORDY)); - - // Switch main clock to HFXO and wait for it to be selected - CMU->HFCLKSEL = CMU_HFCLKSEL_HF_HFXO; - while((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) != CMU_HFCLKSTATUS_SELECTED_HFXO); - - // Calibrate HFRCO for 72MHz and enable tuning by PLL - cmu_hfrco_calib((DEVINFO->HFRCOCAL16) | CMU_HFRCOCTRL_FINETUNINGEN); - - // Setup the PLL - CMU->DPLLCTRL = CMU_DPLLCTRL_REFSEL_HFXO | CMU_DPLLCTRL_AUTORECOVER | CMU_DPLLCTRL_EDGESEL_RISE | CMU_DPLLCTRL_MODE_FREQLL; - // 72MHz = 50MHz (HFXO) * 1.44 (144/100) - CMU->DPLLCTRL1 = (143 << _CMU_DPLLCTRL1_N_SHIFT) | (99 << _CMU_DPLLCTRL1_M_SHIFT); // fHFRCO = fHFXO * (N + 1) / (M + 1) - - // Enable the DPLL and wait for it to be ready - CMU->OSCENCMD = CMU_OSCENCMD_DPLLEN; - while(!(CMU->STATUS & CMU_STATUS_DPLLRDY)); - - // Config peripherals for the new frequency (freq > 32MHz) - CMU->CTRL |= CMU_CTRL_WSHFLE; - - // Set prescalers - CMU->HFPRESC = CMU_HFPRESC_HFCLKLEPRESC_DIV2 | CMU_HFPRESC_PRESC_NODIVISION; - CMU->HFBUSPRESC = 1 << _CMU_HFBUSPRESC_PRESC_SHIFT; - CMU->HFCOREPRESC = 0 << _CMU_HFCOREPRESC_PRESC_SHIFT; - CMU->HFPERPRESC = 1 << _CMU_HFPERPRESC_PRESC_SHIFT; - CMU->HFEXPPRESC = 0 << _CMU_HFEXPPRESC_PRESC_SHIFT; - CMU->HFPERPRESCB = 0 << _CMU_HFPERPRESCB_PRESC_SHIFT; - CMU->HFPERPRESCC = 1 << _CMU_HFPERPRESCC_PRESC_SHIFT; - - // Enable clock to peripherals - CMU->CTRL |= CMU_CTRL_HFPERCLKEN; - - // Switch main clock to HFRCO and wait for it to be selected - CMU->HFCLKSEL = CMU_HFCLKSEL_HF_HFRCO; - while((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) != CMU_HFCLKSTATUS_SELECTED_HFRCO); - - // LFA Clock - CMU->LFACLKSEL = CMU_LFACLKSEL_LFA_LFRCO; - - // LFB Clock - CMU->LFBCLKSEL = CMU_LFBCLKSEL_LFB_LFRCO; - - // LFC Clock - CMU->LFCCLKSEL = CMU_LFCCLKSEL_LFC_LFRCO; - - // LFE Clock - CMU->LFECLKSEL = CMU_LFECLKSEL_LFE_ULFRCO; -} - -void systick_init(void) -{ - SysTick->LOAD = (72000000 / 1000) - 1; - SysTick->VAL = 0; - SysTick->CTRL = SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk | SysTick_CTRL_CLKSOURCE_Msk; - - SCB->SHP[11] = 7 << (8 - __NVIC_PRIO_BITS); // Set priority 3,1 (min) -} - -void gpio_init(void) -{ - CMU->HFBUSCLKEN0 |= CMU_HFBUSCLKEN0_GPIO; - - // NC - Not Connected (not available in mcu package) - // NR - Not routed (no routing to pin on pcb, floating) - // NU - Not used (not currently in use) - - // Port A - GPIO->P[0].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[0].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NU - | GPIO_P_MODEL_MODE1_DISABLED // NU - | GPIO_P_MODEL_MODE2_DISABLED // NU - | GPIO_P_MODEL_MODE3_DISABLED // NU - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NU - | GPIO_P_MODEL_MODE7_DISABLED; // NC - GPIO->P[0].MODEH = GPIO_P_MODEH_MODE8_DISABLED // GPIO - MIC_ENABLE - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // NC - | GPIO_P_MODEH_MODE11_DISABLED // NC - | GPIO_P_MODEH_MODE12_WIREDAND // LED0R - | GPIO_P_MODEH_MODE13_WIREDAND // LED0B - | GPIO_P_MODEH_MODE14_WIREDAND // LED0G - | GPIO_P_MODEH_MODE15_DISABLED; // NU - GPIO->P[0].DOUT = 0x7000; // Leds off By default - GPIO->P[0].OVTDIS = 0; - - // Port B - GPIO->P[1].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[1].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC - | GPIO_P_MODEL_MODE1_DISABLED // NC - | GPIO_P_MODEL_MODE2_DISABLED // NC - | GPIO_P_MODEL_MODE3_DISABLED // NU - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NU - | GPIO_P_MODEL_MODE7_DISABLED; // MAIN_LFXTAL_P - GPIO->P[1].MODEH = GPIO_P_MODEH_MODE8_DISABLED // MAIN_LFXTAL_N - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // NC - | GPIO_P_MODEH_MODE11_DISABLED // PDM_DAT0 - MIC_DATA - | GPIO_P_MODEH_MODE12_DISABLED // PDM_CLK - MIC_CLOCK - | GPIO_P_MODEH_MODE13_DISABLED // MAIN_HFXTAL_P - | GPIO_P_MODEH_MODE14_DISABLED // MAIN_HFXTAL_N - | GPIO_P_MODEH_MODE15_DISABLED; // NC - GPIO->P[1].DOUT = 0; - GPIO->P[1].OVTDIS = 0; - - // Port C - GPIO->P[2].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (7 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[2].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC - | GPIO_P_MODEL_MODE1_DISABLED // NC - | GPIO_P_MODEL_MODE2_DISABLED // NC - | GPIO_P_MODEL_MODE3_DISABLED // NC - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NC - | GPIO_P_MODEL_MODE7_DISABLED; // NC - GPIO->P[2].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NC - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // NC - | GPIO_P_MODEH_MODE11_DISABLED // NC - | GPIO_P_MODEH_MODE12_DISABLED // NC - | GPIO_P_MODEH_MODE13_DISABLED // NC - | GPIO_P_MODEH_MODE14_DISABLED // NC - | GPIO_P_MODEH_MODE15_DISABLED; // NC - GPIO->P[2].DOUT = 0; - GPIO->P[2].OVTDIS = 0; - - // Port D - GPIO->P[3].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[3].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NU - | GPIO_P_MODEL_MODE1_DISABLED // NU - | GPIO_P_MODEL_MODE2_DISABLED // NU - | GPIO_P_MODEL_MODE3_DISABLED // NU - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_INPUT // GPIO - BTN0 - | GPIO_P_MODEL_MODE6_WIREDAND // LED1R - | GPIO_P_MODEL_MODE7_DISABLED; // NU - GPIO->P[3].MODEH = GPIO_P_MODEH_MODE8_INPUT // GPIO - BTN1 - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // NC - | GPIO_P_MODEH_MODE11_DISABLED // NC - | GPIO_P_MODEH_MODE12_DISABLED // NC - | GPIO_P_MODEH_MODE13_DISABLED // NC - | GPIO_P_MODEH_MODE14_DISABLED // NC - | GPIO_P_MODEH_MODE15_DISABLED; // NC - GPIO->P[3].DOUT = 0; - GPIO->P[3].OVTDIS = 0; - - // Port E - GPIO->P[4].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[4].MODEL = GPIO_P_MODEL_MODE0_DISABLED // NC - | GPIO_P_MODEL_MODE1_DISABLED // NC - | GPIO_P_MODEL_MODE2_DISABLED // NC - | GPIO_P_MODEL_MODE3_DISABLED // NC - | GPIO_P_MODEL_MODE4_DISABLED // NU - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NU - | GPIO_P_MODEL_MODE7_DISABLED; // NU - GPIO->P[4].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NU - | GPIO_P_MODEH_MODE9_DISABLED // NU - | GPIO_P_MODEH_MODE10_DISABLED // NU - | GPIO_P_MODEH_MODE11_DISABLED // NU - | GPIO_P_MODEH_MODE12_WIREDAND // LED1B - | GPIO_P_MODEH_MODE13_DISABLED // NU - | GPIO_P_MODEH_MODE14_DISABLED // NU - | GPIO_P_MODEH_MODE15_DISABLED; // NU - GPIO->P[4].DOUT = 0; - GPIO->P[4].OVTDIS = 0; - - // Port F - GPIO->P[5].CTRL = GPIO_P_CTRL_DRIVESTRENGTHALT_STRONG | (6 << _GPIO_P_CTRL_SLEWRATEALT_SHIFT) - | GPIO_P_CTRL_DRIVESTRENGTH_STRONG | (6 << _GPIO_P_CTRL_SLEWRATE_SHIFT); - GPIO->P[5].MODEL = GPIO_P_MODEL_MODE0_PUSHPULL // SWCLK - | GPIO_P_MODEL_MODE1_PUSHPULL // SWDIO - | GPIO_P_MODEL_MODE2_PUSHPULL // SWO - | GPIO_P_MODEL_MODE3_DISABLED // NC - | GPIO_P_MODEL_MODE4_DISABLED // NC - | GPIO_P_MODEL_MODE5_DISABLED // NU - | GPIO_P_MODEL_MODE6_DISABLED // NC - | GPIO_P_MODEL_MODE7_DISABLED; // NC - GPIO->P[5].MODEH = GPIO_P_MODEH_MODE8_DISABLED // NC - | GPIO_P_MODEH_MODE9_DISABLED // NC - | GPIO_P_MODEH_MODE10_DISABLED // USB N - | GPIO_P_MODEH_MODE11_DISABLED // USB P - | GPIO_P_MODEH_MODE12_WIREDAND // LED1G - | GPIO_P_MODEH_MODE13_DISABLED // NC - | GPIO_P_MODEH_MODE14_DISABLED // NC - | GPIO_P_MODEH_MODE15_DISABLED; // NC - GPIO->P[5].DOUT = 0; - - GPIO->P[5].OVTDIS = 0; - - // Debugger Route - GPIO->ROUTEPEN &= ~(GPIO_ROUTEPEN_TDIPEN | GPIO_ROUTEPEN_TDOPEN); // Disable JTAG - GPIO->ROUTEPEN |= GPIO_ROUTEPEN_SWVPEN; // Enable SWO - GPIO->ROUTELOC0 = GPIO_ROUTELOC0_SWVLOC_LOC0; // SWO on PF2 - - // External interrupts - GPIO->EXTIPSELL = GPIO_EXTIPSELL_EXTIPSEL0_PORTE // NU - | GPIO_EXTIPSELL_EXTIPSEL1_PORTB // NU - | GPIO_EXTIPSELL_EXTIPSEL2_PORTB // NU - | GPIO_EXTIPSELL_EXTIPSEL3_PORTB // NU - | GPIO_EXTIPSELL_EXTIPSEL4_PORTA // NU - | GPIO_EXTIPSELL_EXTIPSEL5_PORTA // NU - | GPIO_EXTIPSELL_EXTIPSEL6_PORTC // NU - | GPIO_EXTIPSELL_EXTIPSEL7_PORTC; // NU - GPIO->EXTIPSELH = GPIO_EXTIPSELH_EXTIPSEL8_PORTA // NU - | GPIO_EXTIPSELH_EXTIPSEL9_PORTE // NU - | GPIO_EXTIPSELH_EXTIPSEL10_PORTF // NU - | GPIO_EXTIPSELH_EXTIPSEL11_PORTA // NU - | GPIO_EXTIPSELH_EXTIPSEL12_PORTA // NU - | GPIO_EXTIPSELH_EXTIPSEL13_PORTE // NU - | GPIO_EXTIPSELH_EXTIPSEL14_PORTF // NU - | GPIO_EXTIPSELH_EXTIPSEL15_PORTA; // NU - - GPIO->EXTIPINSELL = GPIO_EXTIPINSELL_EXTIPINSEL0_PIN3 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL1_PIN1 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL2_PIN2 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL3_PIN3 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL4_PIN6 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL5_PIN7 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL6_PIN4 // NU - | GPIO_EXTIPINSELL_EXTIPINSEL7_PIN7; // NU - GPIO->EXTIPINSELH = GPIO_EXTIPINSELH_EXTIPINSEL8_PIN8 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL9_PIN9 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL10_PIN11 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL11_PIN8 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL12_PIN13 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL13_PIN15 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL14_PIN12 // NU - | GPIO_EXTIPINSELH_EXTIPINSEL15_PIN12; // NU - -} - -/*--------------------------------------------------------------------*/ -/* Board Init */ -/*--------------------------------------------------------------------*/ - -void board_init(void) -{ - - emu_dcdc_init(1800.f, 50.f, 100.f, 0.f); // Init DC-DC converter (1.8 V, 50 mA active, 100 uA sleep, 0 mA reverse limit) - emu_init(0); - emu_reg_init(3300.f); // set output regulator to 3.3V - - cmu_hfxo_startup_calib(0x200, 0x145); // Config HFXO Startup for 1280 uA, 36 pF (18 pF + 2 pF CLOAD) - cmu_hfxo_steady_calib(0x009, 0x145); // Config HFXO Steady for 12 uA, 36 pF (18 pF + 2 pF CLOAD) - - cmu_init(); // Init Clock Management Unit - - cmu_ushfrco_calib(1, DEVINFO->USHFRCOCAL13); // Enable and calibrate USHFRCO for 48 MHz - cmu_auxhfrco_calib(1, DEVINFO->AUXHFRCOCAL11); // Enable and calibrate AUXHFRCO for 32 MHz - - CMU->USBCRCTRL = CMU_USBCRCTRL_USBCREN; // enable USB clock recovery - CMU->USBCTRL = CMU_USBCTRL_USBCLKSEL_USHFRCO | CMU_USBCTRL_USBCLKEN; // select USHFRCO as USB Phy clock source and enable it - - CMU->HFBUSCLKEN0 |= CMU_HFBUSCLKEN0_USB; // enable USB peripheral clock - - systick_init(); // Init system tick - - gpio_init(); // Init IOs - -} - -/*--------------------------------------------------------------------*/ -/* Board porting API */ -/*--------------------------------------------------------------------*/ - -void board_led_write(bool state) -{ - // Combine red and blue for pink Because it looks good :) - GPIO->P[LED_PORT].DOUT = (GPIO->P[LED_PORT].DOUT & ~((1 << LED_PIN_R) | (1 << LED_PIN_B))) | (state << LED_PIN_R) | (state << LED_PIN_B); -} - -uint32_t board_button_read(void) -{ - return !!(GPIO->P[BUTTON_PORT].DIN & (1 << BUTTON_PIN)); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(char *file, uint32_t line) -{ - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ -- cgit v1.3.1 From 4efb17130b96cb213cad79121397c7fb1b78c202 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 09:33:23 +0700 Subject: fix unused warnings --- src/portable/synopsys/dwc2/hcd_dwc2.c | 1 - 1 file changed, 1 deletion(-) diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 257fa2833..e4ab16d9d 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -1131,7 +1131,6 @@ static bool handle_channel_out_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hc hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; - const dwc2_channel_char_t hcchar = {.value = channel->hcchar}; dwc2_channel_split_t hcsplt = {.value = channel->hcsplt}; bool is_done = false; -- cgit v1.3.1 From ce2dab7fb3a2572fd63e8fdf6682d95d41f59116 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 10:00:14 +0700 Subject: more warning fix --- .github/workflows/ci_set_matrix.py | 3 +-- hw/bsp/maxim/family.cmake | 10 +++++++--- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index e53998c66..46108a847 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -34,8 +34,7 @@ family_list = { "ra": ["arm-gcc"], "rp2040": ["arm-gcc"], "rx": ["rx-gcc"], - "samd11 saml2x": ["arm-gcc", "arm-clang"], - "samd21": ["arm-gcc", "arm-clang"], + "samd11 samd2x_l2x": ["arm-gcc", "arm-clang"], "samd5x_e5x samg": ["arm-gcc", "arm-clang"], "stm32c0 stm32f0 stm32f1 stm32f2 stm32f3": ["arm-gcc", "arm-clang", "arm-iar"], "stm32f4": ["arm-gcc", "arm-clang", "arm-iar"], diff --git a/hw/bsp/maxim/family.cmake b/hw/bsp/maxim/family.cmake index e4b1b2c46..cbfe7c84e 100644 --- a/hw/bsp/maxim/family.cmake +++ b/hw/bsp/maxim/family.cmake @@ -186,9 +186,13 @@ function(family_configure_example TARGET RTOS) target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) + + # warnings caused by MSDK headers + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes) + if (${MAX_DEVICE} STREQUAL "max78002") + target_compile_options(${TARGET} PRIVATE -Wno-error=redundant-decls) + endif () + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) # Flashing -- cgit v1.3.1 From 9bd3622fc796544e0cde440966a16bf38e5b1e1f Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 12:24:45 +0700 Subject: merge nuc121 and 125 --- hw/bsp/board.c | 2 +- hw/bsp/family_support.cmake | 30 ++-- .../boards/nutiny_sdk_nuc121/board.cmake | 15 ++ hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.h | 43 +++++ .../nuc121_125/boards/nutiny_sdk_nuc121/board.mk | 14 ++ .../boards/nutiny_sdk_nuc121/nuc121_flash.ld | 195 +++++++++++++++++++++ .../boards/nutiny_sdk_nuc125/board.cmake | 8 + hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.h | 43 +++++ .../nuc121_125/boards/nutiny_sdk_nuc125/board.mk | 8 + .../boards/nutiny_sdk_nuc125/nuc125_flash.ld | 195 +++++++++++++++++++++ hw/bsp/nuc121_125/family.c | 119 +++++++++++++ hw/bsp/nuc121_125/family.cmake | 108 ++++++++++++ hw/bsp/nuc121_125/family.mk | 43 +++++ hw/bsp/nutiny_nuc121s/board.mk | 46 ----- hw/bsp/nutiny_nuc121s/nuc121_flash.ld | 195 --------------------- hw/bsp/nutiny_nuc121s/nutiny_nuc121.c | 121 ------------- hw/bsp/nutiny_nuc125s/board.mk | 42 ----- hw/bsp/nutiny_nuc125s/nuc125_flash.ld | 195 --------------------- hw/bsp/nutiny_nuc125s/nutiny_nuc125.c | 121 ------------- 19 files changed, 812 insertions(+), 731 deletions(-) create mode 100644 hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.cmake create mode 100644 hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.h create mode 100644 hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.mk create mode 100644 hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/nuc121_flash.ld create mode 100644 hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.cmake create mode 100644 hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.h create mode 100644 hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.mk create mode 100644 hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/nuc125_flash.ld create mode 100644 hw/bsp/nuc121_125/family.c create mode 100644 hw/bsp/nuc121_125/family.cmake create mode 100644 hw/bsp/nuc121_125/family.mk delete mode 100644 hw/bsp/nutiny_nuc121s/board.mk delete mode 100644 hw/bsp/nutiny_nuc121s/nuc121_flash.ld delete mode 100644 hw/bsp/nutiny_nuc121s/nutiny_nuc121.c delete mode 100644 hw/bsp/nutiny_nuc125s/board.mk delete mode 100644 hw/bsp/nutiny_nuc125s/nuc125_flash.ld delete mode 100644 hw/bsp/nutiny_nuc125s/nutiny_nuc125.c diff --git a/hw/bsp/board.c b/hw/bsp/board.c index a51978479..03d09c353 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -31,7 +31,7 @@ #ifdef __ICCARM__ #define sys_write __write #define sys_read __read -#elif defined(__MSP430__) || defined(__RX__) +#elif defined(__MSP430__) || defined(__RX__) || TU_CHECK_MCU(OPT_MCU_NUC121) #define sys_write write #define sys_read read #else diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d8ef79f60..23f63e759 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -1,6 +1,7 @@ include_guard(GLOBAL) include(CMakePrintHelpers) +set(CMAKE_EXPORT_COMPILE_COMMANDS ON) # TOP is path to root directory set(TOP "${CMAKE_CURRENT_LIST_DIR}/../..") @@ -8,13 +9,6 @@ get_filename_component(TOP ${TOP} ABSOLUTE) set(UF2CONV_PY ${TOP}/tools/uf2/utils/uf2conv.py) -#------------------------------------------------------------- -# RTOS -#------------------------------------------------------------- -if (NOT DEFINED RTOS) - set(RTOS noos CACHE STRING "RTOS") -endif () - #------------------------------------------------------------- # Toolchain # Can be changed via -DTOOLCHAIN=gcc|iar or -DCMAKE_C_COMPILER= @@ -62,8 +56,8 @@ set(WARN_FLAGS_GNU -Wunused -Wunused-function -Wreturn-type - -Wredundant-decls - -Wmissing-prototypes + #-Wredundant-decls + #-Wmissing-prototypes ) set(WARN_FLAGS_Clang ${WARN_FLAGS_GNU}) @@ -115,8 +109,12 @@ if (NOT NO_WARN_RWX_SEGMENTS_SUPPORTED) endif() #---------------------------------- -# Zephyr +# RTOS #---------------------------------- +if (NOT DEFINED RTOS) + set(RTOS noos CACHE STRING "RTOS") +endif () + if (RTOS STREQUAL zephyr) set(BOARD_ROOT ${TOP}/hw/bsp/${FAMILY}) set(ZEPHYR_BOARD_ALIASES ${CMAKE_CURRENT_LIST_DIR}/zephyr_board_aliases.cmake) @@ -540,6 +538,18 @@ function(family_flash_openocd_adi TARGET) family_flash_openocd(${TARGET}) endfunction() +# Add flash openocd-nuvoton target +# compiled from https://github.com/OpenNuvoton/OpenOCD-Nuvoton +function(family_flash_openocd_nuvoton TARGET) + if (NOT DEFINED OPENOCD) + set(OPENOCD $ENV{HOME}/app/OpenOCD-Nuvoton/src/openocd) + set(OPENOCD_OPTION2 "-s $ENV{HOME}/app/OpenOCD-Nuvoton/tcl") + endif () + + family_flash_openocd(${TARGET}) +endfunction() + + # Add flash with https://github.com/ch32-rs/wlink function(family_flash_wlink_rs TARGET) if (NOT DEFINED WLINK_RS) diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.cmake b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.cmake new file mode 100644 index 000000000..320ce5a6e --- /dev/null +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.cmake @@ -0,0 +1,15 @@ +set(NUC_SERIES nuc121) +set(JLINK_DEVICE NUC121SC2AE) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/nuc121_flash.ld) + +# Extra StdDriver sources for NUC121 +set(BOARD_SOURCES + ${SDK_DIR}/StdDriver/src/fmc.c + ${SDK_DIR}/StdDriver/src/sys.c + ${SDK_DIR}/StdDriver/src/timer.c +) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + ) +endfunction() diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.h b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.h new file mode 100644 index 000000000..73e73d5b3 --- /dev/null +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.h @@ -0,0 +1,43 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT PB +#define LED_PIN 4 +#define LED_PIN_IO PB4 +#define LED_STATE_ON 0 + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.mk b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.mk new file mode 100644 index 000000000..78d2f0ff4 --- /dev/null +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.mk @@ -0,0 +1,14 @@ +NUC_SERIES = nuc121 +JLINK_DEVICE = NUC121SC2AE +LD_FILE = $(BOARD_PATH)/nuc121_flash.ld + +# Extra StdDriver sources for NUC121 +SRC_C += \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/fmc.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/sys.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/timer.c + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +flash: $(BUILD)/$(PROJECT).elf + openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/nuc121_flash.ld b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/nuc121_flash.ld new file mode 100644 index 000000000..0c599a561 --- /dev/null +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/nuc121_flash.ld @@ -0,0 +1,195 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x8000 /* 32k */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x2000 /* 8k */ +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.vectors)) + __Vectors_End = .; + __Vectors_Size = __Vectors_End - __Vectors; + __end__ = .; + + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.cmake b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.cmake new file mode 100644 index 000000000..d9bbebfba --- /dev/null +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.cmake @@ -0,0 +1,8 @@ +set(NUC_SERIES nuc125) +set(JLINK_DEVICE NUC125SC2AE) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/nuc125_flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + ) +endfunction() diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.h b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.h new file mode 100644 index 000000000..73e73d5b3 --- /dev/null +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.h @@ -0,0 +1,43 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT PB +#define LED_PIN 4 +#define LED_PIN_IO PB4 +#define LED_STATE_ON 0 + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.mk b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.mk new file mode 100644 index 000000000..04541ab6f --- /dev/null +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.mk @@ -0,0 +1,8 @@ +NUC_SERIES = nuc125 +JLINK_DEVICE = NUC125SC2AE +LD_FILE = $(BOARD_PATH)/nuc125_flash.ld + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +flash: $(BUILD)/$(PROJECT).elf + openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/nuc125_flash.ld b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/nuc125_flash.ld new file mode 100644 index 000000000..0c599a561 --- /dev/null +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/nuc125_flash.ld @@ -0,0 +1,195 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x8000 /* 32k */ + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x2000 /* 8k */ +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.vectors)) + __Vectors_End = .; + __Vectors_Size = __Vectors_End - __Vectors; + __end__ = .; + + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/hw/bsp/nuc121_125/family.c b/hw/bsp/nuc121_125/family.c new file mode 100644 index 000000000..089855207 --- /dev/null +++ b/hw/bsp/nuc121_125/family.c @@ -0,0 +1,119 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board_api.h" +#include "board.h" + +#include "NuMicro.h" +#include "clk.h" +#include "sys.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// Board Initialization +//--------------------------------------------------------------------+ + +void board_init(void) +{ + /* Unlock protected registers */ + SYS_UnlockReg(); + + /*---------------------------------------------------------------------------------------------------------*/ + /* Init System Clock */ + /*---------------------------------------------------------------------------------------------------------*/ + + /* Enable Internal HIRC 48 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN); + + /* Waiting for Internal RC clock ready */ + CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); + + /* Switch HCLK clock source to Internal HIRC and HCLK source divide 1 */ + CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + + /* Select module clock source */ + CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC, CLK_CLKDIV0_USB(1)); + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(48000000 / 1000); +#endif + + // LED + GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/hw/bsp/nuc121_125/family.cmake b/hw/bsp/nuc121_125/family.cmake new file mode 100644 index 000000000..42f24c116 --- /dev/null +++ b/hw/bsp/nuc121_125/family.cmake @@ -0,0 +1,108 @@ +include_guard() + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +set(SDK_DIR ${TOP}/hw/mcu/nuvoton/nuc121_125) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m0 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(OPENOCD_OPTION "-f interface/nulink.cfg -f target/numicroM0.cfg") + +set(FAMILY_MCUS NUC121 NUC125 CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + # Common sources for all NUC12x + set(COMMON_SOURCES + ${SDK_DIR}/Device/Nuvoton/NUC121/Source/system_NUC121.c + ${SDK_DIR}/StdDriver/src/clk.c + ${SDK_DIR}/StdDriver/src/gpio.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + # Add board-specific sources if defined + if(DEFINED BOARD_SOURCES) + list(APPEND COMMON_SOURCES ${BOARD_SOURCES}) + endif() + + add_library(${BOARD_TARGET} STATIC ${COMMON_SOURCES}) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/Device/Nuvoton/NUC121/Include + ${SDK_DIR}/StdDriver/inc + ${SDK_DIR}/CMSIS/Include + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + __ARM_FEATURE_DSP=0 + USE_ASSERT=0 + CFG_EXAMPLE_MSC_READONLY + ) + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_NUC121) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/nuvoton/nuc121/dcd_nuc121.c + ) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + family_flash_openocd_nuvoton(${TARGET}) +endfunction() diff --git a/hw/bsp/nuc121_125/family.mk b/hw/bsp/nuc121_125/family.mk new file mode 100644 index 000000000..c3a72b2f7 --- /dev/null +++ b/hw/bsp/nuc121_125/family.mk @@ -0,0 +1,43 @@ +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs-linux \ + -mcpu=cortex-m0 \ + -D__ARM_FEATURE_DSP=0 \ + -DUSE_ASSERT=0 \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_NUC121 + +CPU_CORE ?= cortex-m0 + +# mcu driver cause following warnings +CFLAGS += -Wno-error=redundant-decls + +LDFLAGS_GCC += \ + --specs=nosys.specs --specs=nano.specs + +# All source paths should be relative to the top level. +# LD_FILE is defined in board.mk + +# Common sources for all NUC12x variants +SRC_C += \ + src/portable/nuvoton/nuc121/dcd_nuc121.c \ + hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/system_NUC121.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/clk.c \ + hw/mcu/nuvoton/nuc121_125/StdDriver/src/gpio.c + +# Additional sources are added in board.mk if needed (e.g., fmc, sys, timer, uart for NUC121) + +SRC_S += \ + hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S + +INC += \ + $(TOP)/hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Include \ + $(TOP)/hw/mcu/nuvoton/nuc121_125/StdDriver/inc \ + $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include \ + $(TOP)/$(BOARD_PATH) + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/nutiny_nuc121s/board.mk b/hw/bsp/nutiny_nuc121s/board.mk deleted file mode 100644 index 06c47d544..000000000 --- a/hw/bsp/nutiny_nuc121s/board.mk +++ /dev/null @@ -1,46 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ - -D__ARM_FEATURE_DSP=0 \ - -DUSE_ASSERT=0 \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_NUC121 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=redundant-decls - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/nuc121_flash.ld - -SRC_C += \ - src/portable/nuvoton/nuc121/dcd_nuc121.c \ - hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/system_NUC121.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/fmc.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/gpio.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/sys.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/timer.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/uart.c - -SRC_S += \ - hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Include \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = NUC121SC2AE - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/hw/bsp/nutiny_nuc121s/nuc121_flash.ld b/hw/bsp/nutiny_nuc121s/nuc121_flash.ld deleted file mode 100644 index 0c599a561..000000000 --- a/hw/bsp/nutiny_nuc121s/nuc121_flash.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x8000 /* 32k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x2000 /* 8k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c b/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c deleted file mode 100644 index 7cb9b2e69..000000000 --- a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "NuMicro.h" -#include "clk.h" -#include "sys.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PB -#define LED_PIN 4 -#define LED_PIN_IO PB4 -#define LED_STATE_ON 0 - -void board_init(void) -{ - /* Unlock protected registers */ - SYS_UnlockReg(); - - /*---------------------------------------------------------------------------------------------------------*/ - /* Init System Clock */ - /*---------------------------------------------------------------------------------------------------------*/ - - /* Enable Internal HIRC 48 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); - - /* Switch HCLK clock source to Internal HIRC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - - /* Select module clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC, CLK_CLKDIV0_USB(1)); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(48000000 / 1000); -#endif - - // LED - GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/hw/bsp/nutiny_nuc125s/board.mk b/hw/bsp/nutiny_nuc125s/board.mk deleted file mode 100644 index 50b9d866a..000000000 --- a/hw/bsp/nutiny_nuc125s/board.mk +++ /dev/null @@ -1,42 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ - -D__ARM_FEATURE_DSP=0 \ - -DUSE_ASSERT=0 \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_NUC121 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=redundant-decls - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/nuc125_flash.ld - -SRC_C += \ - src/portable/nuvoton/nuc121/dcd_nuc121.c \ - hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/system_NUC121.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc121_125/StdDriver/src/gpio.c - -SRC_S += \ - hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/Device/Nuvoton/NUC121/Include \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = NUC125SC2AE - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/hw/bsp/nutiny_nuc125s/nuc125_flash.ld b/hw/bsp/nutiny_nuc125s/nuc125_flash.ld deleted file mode 100644 index 0c599a561..000000000 --- a/hw/bsp/nutiny_nuc125s/nuc125_flash.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x8000 /* 32k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x2000 /* 8k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c b/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c deleted file mode 100644 index 7cb9b2e69..000000000 --- a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "NuMicro.h" -#include "clk.h" -#include "sys.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PB -#define LED_PIN 4 -#define LED_PIN_IO PB4 -#define LED_STATE_ON 0 - -void board_init(void) -{ - /* Unlock protected registers */ - SYS_UnlockReg(); - - /*---------------------------------------------------------------------------------------------------------*/ - /* Init System Clock */ - /*---------------------------------------------------------------------------------------------------------*/ - - /* Enable Internal HIRC 48 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); - - /* Switch HCLK clock source to Internal HIRC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - - /* Select module clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC, CLK_CLKDIV0_USB(1)); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(48000000 / 1000); -#endif - - // LED - GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} -- cgit v1.3.1 From 0d690c8b801da36b0d06490648c1110da06edc19 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 12:49:36 +0700 Subject: update nuc121/125 --- .../device/audio_4_channel_mic_freertos/skip.txt | 1 + examples/device/audio_test_freertos/skip.txt | 1 + examples/device/cdc_msc_freertos/skip.txt | 1 + hw/bsp/nuc121_125/FreeRTOSConfig/FreeRTOSConfig.h | 150 +++++++++++++++++++++ .../boards/nutiny_sdk_nuc121/board.cmake | 7 - .../nuc121_125/boards/nutiny_sdk_nuc121/board.mk | 11 -- .../nuc121_125/boards/nutiny_sdk_nuc125/board.mk | 5 - hw/bsp/nuc121_125/family.cmake | 14 +- hw/bsp/nuc121_125/family.mk | 11 +- src/common/tusb_mcu.h | 1 + src/portable/nuvoton/nuc121/dcd_nuc121.c | 16 ++- 11 files changed, 184 insertions(+), 34 deletions(-) create mode 100644 hw/bsp/nuc121_125/FreeRTOSConfig/FreeRTOSConfig.h diff --git a/examples/device/audio_4_channel_mic_freertos/skip.txt b/examples/device/audio_4_channel_mic_freertos/skip.txt index 30cd46e7e..65925b32c 100644 --- a/examples/device/audio_4_channel_mic_freertos/skip.txt +++ b/examples/device/audio_4_channel_mic_freertos/skip.txt @@ -17,3 +17,4 @@ board:lpcxpresso11u37 board:lpcxpresso1347 family:broadcom_32bit family:broadcom_64bit +family:nuc121_125 diff --git a/examples/device/audio_test_freertos/skip.txt b/examples/device/audio_test_freertos/skip.txt index 1f3d4281a..c9cdacad7 100644 --- a/examples/device/audio_test_freertos/skip.txt +++ b/examples/device/audio_test_freertos/skip.txt @@ -15,3 +15,4 @@ mcu:RAXXX family:broadcom_32bit family:broadcom_64bit board:stm32l0538disco +family:nuc121_125 diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index b73a6d8dd..69fc883e6 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -15,3 +15,4 @@ mcu:RAXXX mcu:STM32L0 family:broadcom_32bit family:broadcom_64bit +family:nuc121_125 diff --git a/hw/bsp/nuc121_125/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nuc121_125/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..e8f120553 --- /dev/null +++ b/hw/bsp/nuc121_125/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,150 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "NuMicro.h" +#endif + +/* Cortex-M0 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 0 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +// NUC121/125 has 2 priority bits +#define configPRIO_BITS 2 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<bEndpointAddress); cfg |= (TUSB_DIR_IN == dir) ? USBD_CFG_EPMODE_IN : USBD_CFG_EPMODE_OUT; - if (TUSB_XFER_ISOCHRONOUS == type) + if (TUSB_XFER_ISOCHRONOUS == type) { cfg |= USBD_CFG_TYPE_ISO; + } ep->CFG = cfg; /* make a note of the endpoint size */ @@ -303,6 +304,19 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) return true; } +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; // TODO not implemented yet +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { + (void) rhport; + (void) desc_ep; + return false; // TODO not implemented yet +} + void dcd_edpt_close_all (uint8_t rhport) { (void) rhport; -- cgit v1.3.1 From 8199ed6fd0329e63c45352816973a6632d635c69 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 13:37:21 +0700 Subject: refactor all nuc to family --- examples/device/net_lwip_webserver/skip.txt | 1 + hw/bsp/board.c | 2 +- hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h | 150 ++++++++++++++++ .../boards/nutiny_sdk_nuc120/board.cmake | 7 + hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/board.h | 43 +++++ .../nuc100_120/boards/nutiny_sdk_nuc120/board.mk | 2 + .../boards/nutiny_sdk_nuc120/nuc120_flash.ld | 195 ++++++++++++++++++++ hw/bsp/nuc100_120/family.c | 127 +++++++++++++ hw/bsp/nuc100_120/family.cmake | 87 +++++++++ hw/bsp/nuc100_120/family.mk | 39 ++++ hw/bsp/nuc121_125/family.mk | 3 - hw/bsp/nuc126/FreeRTOSConfig/FreeRTOSConfig.h | 150 ++++++++++++++++ hw/bsp/nuc126/boards/nutiny_nuc126v/board.cmake | 7 + hw/bsp/nuc126/boards/nutiny_nuc126v/board.h | 46 +++++ hw/bsp/nuc126/boards/nutiny_nuc126v/board.mk | 2 + .../nuc126/boards/nutiny_nuc126v/nuc126_flash.ld | 195 ++++++++++++++++++++ hw/bsp/nuc126/family.c | 144 +++++++++++++++ hw/bsp/nuc126/family.cmake | 104 +++++++++++ hw/bsp/nuc126/family.mk | 48 +++++ hw/bsp/nuc505/FreeRTOSConfig/FreeRTOSConfig.h | 150 ++++++++++++++++ hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.cmake | 7 + hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.h | 42 +++++ hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.mk | 2 + .../boards/nutiny_sdk_nuc505/nuc505_flashtoram.ld | 199 +++++++++++++++++++++ hw/bsp/nuc505/family.c | 127 +++++++++++++ hw/bsp/nuc505/family.cmake | 91 ++++++++++ hw/bsp/nuc505/family.mk | 55 ++++++ hw/bsp/nutiny_nuc126v/board.mk | 48 ----- hw/bsp/nutiny_nuc126v/nuc126_flash.ld | 195 -------------------- hw/bsp/nutiny_nuc126v/nutiny_nuc126.c | 153 ---------------- hw/bsp/nutiny_sdk_nuc120/board.mk | 41 ----- hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld | 195 -------------------- hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c | 133 -------------- hw/bsp/nutiny_sdk_nuc505/board.mk | 63 ------- hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld | 199 --------------------- hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c | 129 ------------- src/common/tusb_mcu.h | 2 + src/portable/nuvoton/nuc505/dcd_nuc505.c | 13 ++ 38 files changed, 2036 insertions(+), 1160 deletions(-) create mode 100644 hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/board.cmake create mode 100644 hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/board.h create mode 100644 hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/board.mk create mode 100644 hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/nuc120_flash.ld create mode 100644 hw/bsp/nuc100_120/family.c create mode 100644 hw/bsp/nuc100_120/family.cmake create mode 100644 hw/bsp/nuc100_120/family.mk create mode 100644 hw/bsp/nuc126/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/nuc126/boards/nutiny_nuc126v/board.cmake create mode 100644 hw/bsp/nuc126/boards/nutiny_nuc126v/board.h create mode 100644 hw/bsp/nuc126/boards/nutiny_nuc126v/board.mk create mode 100644 hw/bsp/nuc126/boards/nutiny_nuc126v/nuc126_flash.ld create mode 100644 hw/bsp/nuc126/family.c create mode 100644 hw/bsp/nuc126/family.cmake create mode 100644 hw/bsp/nuc126/family.mk create mode 100644 hw/bsp/nuc505/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.cmake create mode 100644 hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.h create mode 100644 hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.mk create mode 100644 hw/bsp/nuc505/boards/nutiny_sdk_nuc505/nuc505_flashtoram.ld create mode 100644 hw/bsp/nuc505/family.c create mode 100644 hw/bsp/nuc505/family.cmake create mode 100644 hw/bsp/nuc505/family.mk delete mode 100644 hw/bsp/nutiny_nuc126v/board.mk delete mode 100644 hw/bsp/nutiny_nuc126v/nuc126_flash.ld delete mode 100644 hw/bsp/nutiny_nuc126v/nutiny_nuc126.c delete mode 100644 hw/bsp/nutiny_sdk_nuc120/board.mk delete mode 100644 hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld delete mode 100644 hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c delete mode 100644 hw/bsp/nutiny_sdk_nuc505/board.mk delete mode 100644 hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld delete mode 100644 hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 6121f1f9d..1b5482a57 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -20,3 +20,4 @@ board:curiosity_nano board:frdm_kl25z # lpc55 has weird error 'ncm_interface' causes a section type conflict with 'ntb_parameters' family:lpc55 +family:nuc126 diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 03d09c353..41e6eb1b8 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -31,7 +31,7 @@ #ifdef __ICCARM__ #define sys_write __write #define sys_read __read -#elif defined(__MSP430__) || defined(__RX__) || TU_CHECK_MCU(OPT_MCU_NUC121) +#elif defined(__MSP430__) || defined(__RX__) || TU_CHECK_MCU(OPT_MCU_NUC120, OPT_MCU_NUC121, OPT_MCU_NUC126, OPT_MCU_NUC505) #define sys_write write #define sys_read read #else diff --git a/hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..e8f120553 --- /dev/null +++ b/hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,150 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "NuMicro.h" +#endif + +/* Cortex-M0 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 0 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +// NUC121/125 has 2 priority bits +#define configPRIO_BITS 2 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/hw/bsp/nuc100_120/family.c b/hw/bsp/nuc100_120/family.c new file mode 100644 index 000000000..d04dc6657 --- /dev/null +++ b/hw/bsp/nuc100_120/family.c @@ -0,0 +1,127 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board_api.h" +#include "board.h" + +#include "NUC100Series.h" +#include "clk.h" +#include "sys.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} + +void board_init(void) +{ + SYS_UnlockReg(); + + /* Enable Internal RC 22.1184 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCON_OSC22M_EN_Msk); + + /* Waiting for Internal RC clock ready */ + CLK_WaitClockReady(CLK_CLKSTATUS_OSC22M_STB_Msk); + + /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ + CLK_SetHCLK(CLK_CLKSEL0_HCLK_S_HIRC, CLK_CLKDIV_HCLK(1)); + + /* Enable external XTAL 12 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCON_XTL12M_EN_Msk); + + /* Waiting for external XTAL clock ready */ + CLK_WaitClockReady(CLK_CLKSTATUS_XTL12M_STB_Msk); + + /* Set core clock */ + CLK_SetCoreClock(48000000); + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + + /* Select module clock source */ + CLK_SetModuleClock(USBD_MODULE, 0, CLK_CLKDIV_USB(1)); + + SYS_LockReg(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(48000000 / 1000); +#endif + + GPIO_SetMode(LED_PORT, 1UL << LED_PIN, GPIO_PMD_OUTPUT); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ +#if 0 + /* this would be the simplest solution... *IF* the part supported the pin data interface */ + LED_PIN_IO = (state) ? LED_STATE_ON : (1-LED_STATE_ON); +#else + /* if the part's *PDIO pin data registers don't work, a more elaborate approach is needed */ + uint32_t irq_state = __get_PRIMASK(); + __disable_irq(); + uint32_t current = LED_PORT->DOUT & ~(1UL << LED_PIN); + LED_PORT->DOUT = current | (((state) ? LED_STATE_ON : (1UL-LED_STATE_ON)) << LED_PIN); + __set_PRIMASK(irq_state); +#endif +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/hw/bsp/nuc100_120/family.cmake b/hw/bsp/nuc100_120/family.cmake new file mode 100644 index 000000000..06501b526 --- /dev/null +++ b/hw/bsp/nuc100_120/family.cmake @@ -0,0 +1,87 @@ +include_guard() + +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +set(SDK_DIR ${TOP}/hw/mcu/nuvoton/nuc100_120) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +set(CMAKE_SYSTEM_CPU cortex-m0 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(OPENOCD_OPTION "-f interface/nulink.cfg -f target/numicroM0.cfg") + +set(FAMILY_MCUS NUC100 NUC120 CACHE INTERNAL "") + +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC100Series/Source/GCC/startup_NUC100Series.S) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/Device/Nuvoton/NUC100Series/Source/system_NUC100Series.c + ${SDK_DIR}/StdDriver/src/clk.c + ${SDK_DIR}/StdDriver/src/gpio.c + ${SDK_DIR}/StdDriver/src/sys.c + ${SDK_DIR}/StdDriver/src/timer.c + ${SDK_DIR}/StdDriver/src/uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/Device/Nuvoton/NUC100Series/Include + ${SDK_DIR}/StdDriver/inc + ${SDK_DIR}/CMSIS/Include + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_EXAMPLE_MSC_READONLY + CFG_EXAMPLE_VIDEO_READONLY + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + add_board_target(board_${BOARD}) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + family_add_tinyusb(${TARGET} OPT_MCU_NUC120) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/nuvoton/nuc120/dcd_nuc120.c + ) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + family_flash_openocd_nuvoton(${TARGET}) +endfunction() diff --git a/hw/bsp/nuc100_120/family.mk b/hw/bsp/nuc100_120/family.mk new file mode 100644 index 000000000..f9afb4f72 --- /dev/null +++ b/hw/bsp/nuc100_120/family.mk @@ -0,0 +1,39 @@ +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_EXAMPLE_VIDEO_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_NUC120 + +CPU_CORE ?= cortex-m0 + +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + +# LD_FILE is defined in board.mk + +SRC_C += \ + src/portable/nuvoton/nuc120/dcd_nuc120.c \ + hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/system_NUC100Series.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/clk.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/gpio.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/sys.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/timer.c \ + hw/mcu/nuvoton/nuc100_120/StdDriver/src/uart.c + +SRC_S += \ + hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/GCC/startup_NUC100Series.S + +INC += \ + $(TOP)/hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Include \ + $(TOP)/hw/mcu/nuvoton/nuc100_120/StdDriver/inc \ + $(TOP)/hw/mcu/nuvoton/nuc100_120/CMSIS/Include \ + $(TOP)/$(BOARD_PATH) + +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +OPENOCD_NUVOTON_PATH ?= $(HOME)/app/OpenOCD-Nuvoton +flash: $(BUILD)/$(PROJECT).elf + $(OPENOCD_NUVOTON_PATH)/src/openocd -s $(OPENOCD_NUVOTON_PATH)/tcl -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/hw/bsp/nuc121_125/family.mk b/hw/bsp/nuc121_125/family.mk index 9e2430d13..f46dac6e4 100644 --- a/hw/bsp/nuc121_125/family.mk +++ b/hw/bsp/nuc121_125/family.mk @@ -2,9 +2,6 @@ include $(TOP)/$(BOARD_PATH)/board.mk CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ -D__ARM_FEATURE_DSP=0 \ -DUSE_ASSERT=0 \ -DCFG_EXAMPLE_MSC_READONLY \ diff --git a/hw/bsp/nuc126/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nuc126/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..e8f120553 --- /dev/null +++ b/hw/bsp/nuc126/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,150 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "NuMicro.h" +#endif + +/* Cortex-M0 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 0 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +// NUC121/125 has 2 priority bits +#define configPRIO_BITS 2 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/hw/bsp/nuc126/family.c b/hw/bsp/nuc126/family.c new file mode 100644 index 000000000..f992fcab4 --- /dev/null +++ b/hw/bsp/nuc126/family.c @@ -0,0 +1,144 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board_api.h" +#include "board.h" + +#include "NuMicro.h" +#include "clk.h" +#include "sys.h" + + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} +#define TRIM_INIT (SYS_BASE+0x118) + +void board_init(void) +{ + /* Unlock protected registers */ + SYS_UnlockReg(); + + /*---------------------------------------------------------------------------------------------------------*/ + /* Init System Clock */ + /*---------------------------------------------------------------------------------------------------------*/ + + /* Enable Internal RC 22.1184 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN_Msk); + + /* Waiting for Internal RC clock ready */ + CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); + + /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ + CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); + +#ifndef CRYSTAL_LESS + /* Enable external XTAL 12 MHz clock */ + CLK_EnableXtalRC(CLK_PWRCTL_HXTEN_Msk); + + /* Waiting for external XTAL clock ready */ + CLK_WaitClockReady(CLK_STATUS_HXTSTB_Msk); + + /* Set core clock */ + CLK_SetCoreClock(72000000); + + /* Use HIRC as UART clock source */ + CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1)); + + /* Use PLL as USB clock source */ + CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_PLL, CLK_CLKDIV0_USB(3)); + +#else + /* Enable Internal RC 48MHz clock */ + CLK_EnableXtalRC(CLK_PWRCTL_HIRC48EN_Msk); + + /* Waiting for Internal RC clock ready */ + CLK_WaitClockReady(CLK_STATUS_HIRC48STB_Msk); + + /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ + CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC48, CLK_CLKDIV0_HCLK(1)); + + /* Use HIRC as UART clock source */ + CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1)); + + /* Use HIRC48 as USB clock source */ + CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC48, CLK_CLKDIV0_USB(1)); +#endif + + /* Enable module clock */ + CLK_EnableModuleClock(USBD_MODULE); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(48000000 / 1000); +#endif + + // LED + GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/hw/bsp/nuc126/family.cmake b/hw/bsp/nuc126/family.cmake new file mode 100644 index 000000000..00725d725 --- /dev/null +++ b/hw/bsp/nuc126/family.cmake @@ -0,0 +1,104 @@ +include_guard() + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +set(SDK_DIR ${TOP}/hw/mcu/nuvoton/nuc126) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m0 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(OPENOCD_OPTION "-f interface/nulink.cfg -f target/numicroM0.cfg") + +set(FAMILY_MCUS NUC126 CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC126/Source/GCC/startup_NUC126.S) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/Device/Nuvoton/NUC126/Source/system_NUC126.c + ${SDK_DIR}/StdDriver/src/clk.c + ${SDK_DIR}/StdDriver/src/crc.c + ${SDK_DIR}/StdDriver/src/gpio.c + ${SDK_DIR}/StdDriver/src/rtc.c + ${SDK_DIR}/StdDriver/src/sys.c + ${SDK_DIR}/StdDriver/src/timer.c + ${SDK_DIR}/StdDriver/src/uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/Device/Nuvoton/NUC126/Include + ${SDK_DIR}/StdDriver/inc + ${SDK_DIR}/CMSIS/Include + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + __ARM_FEATURE_DSP=0 + USE_ASSERT=0 + CFG_EXAMPLE_VIDEO_READONLY + __CORTEX_SC=0 + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_NUC126) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/nuvoton/nuc121/dcd_nuc121.c + ) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + family_flash_openocd_nuvoton(${TARGET}) +endfunction() diff --git a/hw/bsp/nuc126/family.mk b/hw/bsp/nuc126/family.mk new file mode 100644 index 000000000..37df7aaab --- /dev/null +++ b/hw/bsp/nuc126/family.mk @@ -0,0 +1,48 @@ +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -D__ARM_FEATURE_DSP=0 \ + -DUSE_ASSERT=0 \ + -DCFG_EXAMPLE_VIDEO_READONLY \ + -D__CORTEX_SC=0 \ + -DCFG_TUSB_MCU=OPT_MCU_NUC126 + +CPU_CORE ?= cortex-m0 + +# mcu driver cause following warnings +CFLAGS += -Wno-error=redundant-decls + +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + +# All source paths should be relative to the top level. +# LD_FILE is defined in board.mk + +SRC_C += \ + src/portable/nuvoton/nuc121/dcd_nuc121.c \ + hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/system_NUC126.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/clk.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/crc.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/gpio.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/rtc.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/sys.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/timer.c \ + hw/mcu/nuvoton/nuc126/StdDriver/src/uart.c + +SRC_S += \ + hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/GCC/startup_NUC126.S + +INC += \ + $(TOP)/hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Include \ + $(TOP)/hw/mcu/nuvoton/nuc126/StdDriver/inc \ + $(TOP)/hw/mcu/nuvoton/nuc126/CMSIS/Include \ + $(TOP)/$(BOARD_PATH) + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +OPENOCD_NUVOTON_PATH ?= $(HOME)/app/OpenOCD-Nuvoton +flash: $(BUILD)/$(PROJECT).elf + $(OPENOCD_NUVOTON_PATH)/src/openocd -s $(OPENOCD_NUVOTON_PATH)/tcl -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/hw/bsp/nuc505/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nuc505/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..a44beb767 --- /dev/null +++ b/hw/bsp/nuc505/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,150 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ +#include "NUC505Series.h" +#endif + +/* Cortex-M4F port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +// NUC505 has 3 priority bits +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + + *(.text*) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/hw/bsp/nuc505/family.c b/hw/bsp/nuc505/family.c new file mode 100644 index 000000000..00ed92310 --- /dev/null +++ b/hw/bsp/nuc505/family.c @@ -0,0 +1,127 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board_api.h" +#include "board.h" +#include "NUC505Series.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USBD_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +void board_init(void) +{ + /* Enable XTAL */ + CLK->PWRCTL |= CLK_PWRCTL_HXTEN_Msk; + + CLK_SetCoreClock(96000000); + + /* Set PCLK divider */ + CLK_SetModuleClock(PCLK_MODULE, 0, 1); + + /* Update System Core Clock */ + SystemCoreClockUpdate(); + + /* Enable USB IP clock */ + CLK_EnableModuleClock(USBD_MODULE); + + /* Select USB IP clock source */ + CLK_SetModuleClock(USBD_MODULE, CLK_USBD_SRC_EXT, 0); + + CLK_SetModuleClock(PCLK_MODULE, 0, 1); + + /* Enable PHY */ + USBD_ENABLE_PHY(); + /* wait PHY clock ready */ + while (1) { + USBD->EP[EPA].EPMPS = 0x20; + if (USBD->EP[EPA].EPMPS == 0x20) + break; + } + + /* Force SE0, and then clear it to connect*/ + USBD_SET_SE0(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(96000000 / 1000); +#endif + + GPIO_SetMode(LED_PORT, 1UL << LED_PIN, GPIO_MODE_OUTPUT); +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + uint32_t current = (state) ? LED_STATE_ON : (1-LED_STATE_ON); + current <<= LED_PIN; + uint32_t irq_state = __get_PRIMASK(); + __disable_irq(); + current |= LED_PORT->DOUT & ~(1UL << LED_PIN); + LED_PORT->DOUT = current; + __set_PRIMASK(irq_state); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/hw/bsp/nuc505/family.cmake b/hw/bsp/nuc505/family.cmake new file mode 100644 index 000000000..8816ddbae --- /dev/null +++ b/hw/bsp/nuc505/family.cmake @@ -0,0 +1,91 @@ +include_guard() + +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +set(SDK_DIR ${TOP}/hw/mcu/nuvoton/nuc505) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(OPENOCD_OPTION "-f interface/nulink.cfg -f target/numicroM4.cfg") + +set(FAMILY_MCUS NUC505 CACHE INTERNAL "") + +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC505Series/Source/GCC/startup_NUC505Series.S) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/Device/Nuvoton/NUC505Series/Source/system_NUC505Series.c + ${SDK_DIR}/StdDriver/src/adc.c + ${SDK_DIR}/StdDriver/src/clk.c + ${SDK_DIR}/StdDriver/src/gpio.c + ${SDK_DIR}/StdDriver/src/i2c.c + ${SDK_DIR}/StdDriver/src/i2s.c + ${SDK_DIR}/StdDriver/src/pwm.c + ${SDK_DIR}/StdDriver/src/rtc.c + ${SDK_DIR}/StdDriver/src/spi.c + ${SDK_DIR}/StdDriver/src/spim.c + ${SDK_DIR}/StdDriver/src/sys.c + ${SDK_DIR}/StdDriver/src/timer.c + ${SDK_DIR}/StdDriver/src/uart.c + ${SDK_DIR}/StdDriver/src/wdt.c + ${SDK_DIR}/StdDriver/src/wwdt.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/Device/Nuvoton/NUC505Series/Include + ${SDK_DIR}/StdDriver/inc + ${SDK_DIR}/CMSIS/Include + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + add_board_target(board_${BOARD}) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + family_add_tinyusb(${TARGET} OPT_MCU_NUC505) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/nuvoton/nuc505/dcd_nuc505.c + ) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + family_flash_openocd_nuvoton(${TARGET}) +endfunction() diff --git a/hw/bsp/nuc505/family.mk b/hw/bsp/nuc505/family.mk new file mode 100644 index 000000000..e1f25e2db --- /dev/null +++ b/hw/bsp/nuc505/family.mk @@ -0,0 +1,55 @@ +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -DCFG_TUSB_MCU=OPT_MCU_NUC505 + +CPU_CORE ?= cortex-m4 + +# mcu driver cause following warnings +CFLAGS += -Wno-error=redundant-decls + +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + +# LD_FILE is defined in board.mk + +SRC_C += \ + src/portable/nuvoton/nuc505/dcd_nuc505.c \ + hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Source/system_NUC505Series.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/adc.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/clk.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/gpio.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/i2c.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/i2s.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/pwm.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/rtc.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/spi.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/spim.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/sys.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/timer.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/uart.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/wdt.c \ + hw/mcu/nuvoton/nuc505/StdDriver/src/wwdt.c + +SRC_S += \ + hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Source/GCC/startup_NUC505Series.S + +INC += \ + $(TOP)/hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Include \ + $(TOP)/hw/mcu/nuvoton/nuc505/StdDriver/inc \ + $(TOP)/hw/mcu/nuvoton/nuc505/CMSIS/Include \ + $(TOP)/$(BOARD_PATH) + +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F + +# Note +# To be able to program the SPI flash, it need to boot with ICP mode "1011". +# However, in ICP mode, opencod cannot establish connection to the mcu. +# Therefore, there is no easy command line flash for NUC505 +# It is probably better to just use Nuvoton NuMicro ICP programming on windows to program the board + +# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton +# Please compile and install it from github source +OPENOCD_NUVOTON_PATH ?= $(HOME)/app/OpenOCD-Nuvoton +flash: $(BUILD)/$(PROJECT).elf + $(OPENOCD_NUVOTON_PATH)/src/openocd -s $(OPENOCD_NUVOTON_PATH)/tcl -f interface/nulink.cfg -f target/numicroM4.cfg -c "program $< reset exit" diff --git a/hw/bsp/nutiny_nuc126v/board.mk b/hw/bsp/nutiny_nuc126v/board.mk deleted file mode 100644 index e87d1aad0..000000000 --- a/hw/bsp/nutiny_nuc126v/board.mk +++ /dev/null @@ -1,48 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ - -D__ARM_FEATURE_DSP=0 \ - -DUSE_ASSERT=0 \ - -DCFG_EXAMPLE_VIDEO_READONLY \ - -D__CORTEX_SC=0 \ - -DCFG_TUSB_MCU=OPT_MCU_NUC126 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=redundant-decls - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/nuc126_flash.ld - -SRC_C += \ - src/portable/nuvoton/nuc121/dcd_nuc121.c \ - hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/system_NUC126.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/crc.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/gpio.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/rtc.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/sys.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/timer.c \ - hw/mcu/nuvoton/nuc126/StdDriver/src/uart.c - -SRC_S += \ - hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Source/GCC/startup_NUC126.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc126/Device/Nuvoton/NUC126/Include \ - $(TOP)/hw/mcu/nuvoton/nuc126/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc126/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = NUC126VG4AE - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/hw/bsp/nutiny_nuc126v/nuc126_flash.ld b/hw/bsp/nutiny_nuc126v/nuc126_flash.ld deleted file mode 100644 index b23890b4b..000000000 --- a/hw/bsp/nutiny_nuc126v/nuc126_flash.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x40000 /* 256k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x5000 /* 20k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c b/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c deleted file mode 100644 index 9974127a8..000000000 --- a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "NuMicro.h" -#include "clk.h" -#include "sys.h" - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PC -#define LED_PIN 9 -#define LED_PIN_IO PC9 -#define LED_STATE_ON 0 - -#define CRYSTAL_LESS /* system will be 48MHz when defined, otherwise, system is 72MHz */ -#define HIRC48_AUTO_TRIM SYS_IRCTCTL1_REFCKSEL_Msk | (1UL << SYS_IRCTCTL1_LOOPSEL_Pos) | (2UL << SYS_IRCTCTL1_FREQSEL_Pos) -#define TRIM_INIT (SYS_BASE+0x118) - -void board_init(void) -{ - /* Unlock protected registers */ - SYS_UnlockReg(); - - /*---------------------------------------------------------------------------------------------------------*/ - /* Init System Clock */ - /*---------------------------------------------------------------------------------------------------------*/ - - /* Enable Internal RC 22.1184 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN_Msk); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk); - - /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC, CLK_CLKDIV0_HCLK(1)); - -#ifndef CRYSTAL_LESS - /* Enable external XTAL 12 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HXTEN_Msk); - - /* Waiting for external XTAL clock ready */ - CLK_WaitClockReady(CLK_STATUS_HXTSTB_Msk); - - /* Set core clock */ - CLK_SetCoreClock(72000000); - - /* Use HIRC as UART clock source */ - CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1)); - - /* Use PLL as USB clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_PLL, CLK_CLKDIV0_USB(3)); - -#else - /* Enable Internal RC 48MHz clock */ - CLK_EnableXtalRC(CLK_PWRCTL_HIRC48EN_Msk); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_STATUS_HIRC48STB_Msk); - - /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC48, CLK_CLKDIV0_HCLK(1)); - - /* Use HIRC as UART clock source */ - CLK_SetModuleClock(UART0_MODULE, CLK_CLKSEL1_UARTSEL_HIRC, CLK_CLKDIV0_UART(1)); - - /* Use HIRC48 as USB clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_CLKSEL3_USBDSEL_HIRC48, CLK_CLKDIV0_USB(1)); -#endif - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(48000000 / 1000); -#endif - - // LED - GPIO_SetMode(LED_PORT, 1 << LED_PIN, GPIO_MODE_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - LED_PIN_IO = (state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/hw/bsp/nutiny_sdk_nuc120/board.mk b/hw/bsp/nutiny_sdk_nuc120/board.mk deleted file mode 100644 index d982bdc06..000000000 --- a/hw/bsp/nutiny_sdk_nuc120/board.mk +++ /dev/null @@ -1,41 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_EXAMPLE_VIDEO_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_NUC120 - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld - -SRC_C += \ - src/portable/nuvoton/nuc120/dcd_nuc120.c \ - hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/system_NUC100Series.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/gpio.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/sys.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/timer.c \ - hw/mcu/nuvoton/nuc100_120/StdDriver/src/uart.c - -SRC_S += \ - hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Source/GCC/startup_NUC100Series.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc100_120/Device/Nuvoton/NUC100Series/Include \ - $(TOP)/hw/mcu/nuvoton/nuc100_120/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc100_120/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = NUC120LE3 - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM0.cfg -c "program $< reset exit" diff --git a/hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld b/hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld deleted file mode 100644 index cab12c8b9..000000000 --- a/hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x20000 /* 128k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x4000 /* 16k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - *(.text*) - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c b/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c deleted file mode 100644 index 18a189d8c..000000000 --- a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "NUC100Series.h" -#include "clk.h" -#include "sys.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PB -#define LED_PIN 0 -#define LED_PIN_IO PB0 -#define LED_STATE_ON 0 - -void board_init(void) -{ - SYS_UnlockReg(); - - /* Enable Internal RC 22.1184 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCON_OSC22M_EN_Msk); - - /* Waiting for Internal RC clock ready */ - CLK_WaitClockReady(CLK_CLKSTATUS_OSC22M_STB_Msk); - - /* Switch HCLK clock source to Internal RC and HCLK source divide 1 */ - CLK_SetHCLK(CLK_CLKSEL0_HCLK_S_HIRC, CLK_CLKDIV_HCLK(1)); - - /* Enable external XTAL 12 MHz clock */ - CLK_EnableXtalRC(CLK_PWRCON_XTL12M_EN_Msk); - - /* Waiting for external XTAL clock ready */ - CLK_WaitClockReady(CLK_CLKSTATUS_XTL12M_STB_Msk); - - /* Set core clock */ - CLK_SetCoreClock(48000000); - - /* Enable module clock */ - CLK_EnableModuleClock(USBD_MODULE); - - /* Select module clock source */ - CLK_SetModuleClock(USBD_MODULE, 0, CLK_CLKDIV_USB(1)); - - SYS_LockReg(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(48000000 / 1000); -#endif - - GPIO_SetMode(LED_PORT, 1UL << LED_PIN, GPIO_PMD_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ -#if 0 - /* this would be the simplest solution... *IF* the part supported the pin data interface */ - LED_PIN_IO = (state) ? LED_STATE_ON : (1-LED_STATE_ON); -#else - /* if the part's *PDIO pin data registers don't work, a more elaborate approach is needed */ - uint32_t irq_state = __get_PRIMASK(); - __disable_irq(); - uint32_t current = LED_PORT->DOUT & ~(1UL << LED_PIN); - LED_PORT->DOUT = current | (((state) ? LED_STATE_ON : (1UL-LED_STATE_ON)) << LED_PIN); - __set_PRIMASK(irq_state); -#endif -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/hw/bsp/nutiny_sdk_nuc505/board.mk b/hw/bsp/nutiny_sdk_nuc505/board.mk deleted file mode 100644 index 1dc8b244e..000000000 --- a/hw/bsp/nutiny_sdk_nuc505/board.mk +++ /dev/null @@ -1,63 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_NUC505 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=redundant-decls - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/nuc505_flashtoram.ld - -SRC_C += \ - src/portable/nuvoton/nuc505/dcd_nuc505.c \ - hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Source/system_NUC505Series.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/adc.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/clk.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/gpio.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/i2c.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/i2s.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/pwm.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/rtc.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/spi.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/spim.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/sys.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/timer.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/uart.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/wdt.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/wwdt.c - -SRC_S += \ - hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Source/GCC/startup_NUC505Series.S - -INC += \ - $(TOP)/hw/mcu/nuvoton/nuc505/Device/Nuvoton/NUC505Series/Include \ - $(TOP)/hw/mcu/nuvoton/nuc505/StdDriver/inc \ - $(TOP)/hw/mcu/nuvoton/nuc505/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = NUC505YO13Y - -# Note -# To be able to program the SPI flash, it need to boot with ICP mode "1011". -# However, in ICP mode, opencod cannot establish connection to the mcu. -# Therefore, there is no easy command line flash for NUC505 -# It is probably better to just use Nuvoton NuMicro ICP programming on windows to program the board -# - 1111 "SPI" (run from internal flash) -# - 1110 "USB" (mass storage emulator that accepts a .bin file) -# - 0111 "ICE-SPI" (allow external debugger access, but may not be programmable) -# - 1011 ICP mode (programmable via NuMicro ICP programming tool) - -# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton -# Please compile and install it from github source -flash: $(BUILD)/$(PROJECT).elf - openocd -f interface/nulink.cfg -f target/numicroM4.cfg -c "program $< reset exit" diff --git a/hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld b/hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld deleted file mode 100644 index 53d385cd0..000000000 --- a/hw/bsp/nutiny_sdk_nuc505/nuc505_flashtoram.ld +++ /dev/null @@ -1,199 +0,0 @@ -/* Linker script to configure memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x80000 /* 512k */ - RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x20000 /* 128k */ -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __end__ - * end - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .startup : - { - KEEP(*(.vectors)) - __Vectors_End = .; - __Vectors_Size = __Vectors_End - __Vectors; - __end__ = .; - - KEEP(*(.preinit)) - - KEEP(*(.init)) - KEEP(*(.fini)) - - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - .data : AT (__etext) - { - __data_start__ = .; - - *(.text*) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - - KEEP(*(.eh_frame*)) - - *(vtable) - *(.data*) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - . = ALIGN(4); - /* All data end */ - __data_end__ = .; - - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (COPY): - { - __HeapBase = .; - __end__ = .; - end = __end__; - KEEP(*(.heap*)) - __HeapLimit = .; - } > RAM - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - KEEP(*(.stack*)) - } > RAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(RAM) + LENGTH(RAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") -} diff --git a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c b/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c deleted file mode 100644 index 3ec0066a3..000000000 --- a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "NUC505Series.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USBD_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT PC -#define LED_PIN 3 -#define LED_STATE_ON 0 - -void board_init(void) -{ - /* Enable XTAL */ - CLK->PWRCTL |= CLK_PWRCTL_HXTEN_Msk; - - CLK_SetCoreClock(96000000); - - /* Set PCLK divider */ - CLK_SetModuleClock(PCLK_MODULE, 0, 1); - - /* Update System Core Clock */ - SystemCoreClockUpdate(); - - /* Enable USB IP clock */ - CLK_EnableModuleClock(USBD_MODULE); - - /* Select USB IP clock source */ - CLK_SetModuleClock(USBD_MODULE, CLK_USBD_SRC_EXT, 0); - - CLK_SetModuleClock(PCLK_MODULE, 0, 1); - - /* Enable PHY */ - USBD_ENABLE_PHY(); - /* wait PHY clock ready */ - while (1) { - USBD->EP[EPA].EPMPS = 0x20; - if (USBD->EP[EPA].EPMPS == 0x20) - break; - } - - /* Force SE0, and then clear it to connect*/ - USBD_SET_SE0(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(96000000 / 1000); -#endif - - GPIO_SetMode(LED_PORT, 1UL << LED_PIN, GPIO_MODE_OUTPUT); -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - uint32_t current = (state) ? LED_STATE_ON : (1-LED_STATE_ON); - current <<= LED_PIN; - uint32_t irq_state = __get_PRIMASK(); - __disable_irq(); - current |= LED_PORT->DOUT & ~(1UL << LED_PIN); - LED_PORT->DOUT = current; - __set_PRIMASK(irq_state); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 5e1a6aafd..d0a502367 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -386,10 +386,12 @@ #elif TU_CHECK_MCU(OPT_MCU_NUC120) #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_EDPT_ISO_ALLOC #elif TU_CHECK_MCU(OPT_MCU_NUC505) #define TUP_DCD_ENDPOINT_MAX 12 #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_EDPT_ISO_ALLOC //--------------------------------------------------------------------+ // Espressif diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c index 1c98a0a49..fa457d861 100644 --- a/src/portable/nuvoton/nuc505/dcd_nuc505.c +++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c @@ -357,6 +357,19 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) return true; } +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; // TODO not implemented yet +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { + (void) rhport; + (void) desc_ep; + return false; // TODO not implemented yet +} + void dcd_edpt_close_all (uint8_t rhport) { (void) rhport; -- cgit v1.3.1 From 3ce037d62bb1fec8605af5560d1169c2841af8a1 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 13:38:52 +0700 Subject: add nuc to ci build --- .github/workflows/ci_set_matrix.py | 1 + 1 file changed, 1 insertion(+) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 46108a847..3789b4116 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -31,6 +31,7 @@ family_list = { "msp430": ["msp430-gcc"], "msp432e4 tm4c": ["arm-gcc"], "nrf": ["arm-gcc", "arm-clang"], + "nuc100_120 nuc121_125 nuc126 nuc505": ["arm-gcc"], "ra": ["arm-gcc"], "rp2040": ["arm-gcc"], "rx": ["rx-gcc"], -- cgit v1.3.1 From a8be5759533eb4b8c61af7ecf8fe90551bc69894 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 15:27:48 +0700 Subject: fix build warning with clang --- examples/device/cdc_msc_freertos/src/msc_disk.c | 8 +++----- examples/dual/host_info_to_device_cdc/src/main.c | 6 ++---- hw/bsp/imxrt/family.c | 1 + hw/bsp/stm32h7/boards/stm32h743eval/board.h | 6 +++++- 4 files changed, 11 insertions(+), 10 deletions(-) diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 849712e6a..c09cf67d6 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -299,13 +299,11 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* return TUD_MSC_RET_ERROR; } - #ifdef CFG_EXAMPLE_MSC_READONLY +#ifdef CFG_EXAMPLE_MSC_READONLY (void) lun; (void) buffer; return bufsize; - #endif - - #if CFG_EXAMPLE_MSC_ASYNC_IO +#elif CFG_EXAMPLE_MSC_ASYNC_IO io_ops_t io_ops = {.is_read = false, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize}; // Send IO operation to IO task @@ -318,7 +316,7 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS); return bufsize; - #endif +#endif } // Callback invoked when received an SCSI command not in built-in list below diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 67e905b9d..5f3964196 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -218,9 +218,7 @@ static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_devi cdc_printf("\r\n"); cdc_printf(" iSerialNumber %u " , desc_device->iSerialNumber); - cdc_printf((char*)serial); // serial is already to UTF-8 - cdc_printf("\r\n"); - + cdc_printf("%s \r\n", (char*)serial); // serial is already to UTF-8 cdc_printf(" bNumConfigurations %u\r\n" , desc_device->bNumConfigurations); } @@ -310,5 +308,5 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); ((uint8_t*) temp_buf)[utf8_len] = '\0'; - cdc_printf((char*) temp_buf); + cdc_printf("%s", (char*) temp_buf); } diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 9cd59b7d7..84b083e29 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -249,6 +249,7 @@ TU_ATTR_UNUSED void _start(void) { #ifdef __clang__ void _exit(int __status) { + (void) __status; while (1) {} } #endif diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 7c3f6414a..cfffc7770 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -214,6 +214,10 @@ static int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint return 0; } +static int32_t i2c_get_tick(void) { + return (int32_t) HAL_GetTick(); +} + static inline void board_init2(void) { // IO control via MFX MFXSTM32L152_IO_t io_ctx; @@ -221,7 +225,7 @@ static inline void board_init2(void) { io_ctx.DeInit = board_i2c_deinit; io_ctx.ReadReg = i2c_readreg; io_ctx.WriteReg = i2c_writereg; - io_ctx.GetTick = (MFXSTM32L152_GetTick_Func) HAL_GetTick; + io_ctx.GetTick = i2c_get_tick; uint16_t i2c_addr[] = { 0x84, 0x86 }; for(uint8_t i = 0U; i < 2U; i++) { -- cgit v1.3.1 From 53deb6cc6cf97055fb66f25509b2cdce0b17a3c7 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 15:43:08 +0700 Subject: fix more warnings --- hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- src/portable/nuvoton/nuc120/dcd_nuc120.c | 13 +++++++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h index e8f120553..dfac55a91 100644 --- a/hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/nuc100_120/FreeRTOSConfig/FreeRTOSConfig.h @@ -44,7 +44,7 @@ // skip if included from IAR assembler #ifndef __IASMARM__ - #include "NuMicro.h" +#include "NUC100Series.h" #endif /* Cortex-M0 port configuration. */ diff --git a/src/portable/nuvoton/nuc120/dcd_nuc120.c b/src/portable/nuvoton/nuc120/dcd_nuc120.c index b0b6fe857..0edebf159 100644 --- a/src/portable/nuvoton/nuc120/dcd_nuc120.c +++ b/src/portable/nuvoton/nuc120/dcd_nuc120.c @@ -275,6 +275,19 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) return true; } +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; // TODO not implemented yet +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { + (void) rhport; + (void) desc_ep; + return false; // TODO not implemented yet +} + void dcd_edpt_close_all (uint8_t rhport) { (void) rhport; -- cgit v1.3.1 From 55227a61466ffc39c3605b33be614d725dfe4070 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 15:43:23 +0700 Subject: fix more warnings --- .gitignore | 1 + examples/device/net_lwip_webserver/skip.txt | 1 + hw/bsp/kinetis_k/family.c | 1 + hw/bsp/kinetis_k32l2/family.c | 1 + hw/bsp/kinetis_kl/family.c | 1 + hw/bsp/lpc17/family.c | 6 +++++- hw/bsp/lpc51/family.c | 1 + hw/bsp/lpc54/family.c | 1 + hw/bsp/lpc55/family.c | 1 + hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/board.cmake | 2 -- hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.cmake | 2 -- hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.cmake | 2 -- hw/bsp/nuc126/boards/nutiny_nuc126v/board.cmake | 2 -- hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.cmake | 2 -- tools/get_deps.py | 2 +- 15 files changed, 14 insertions(+), 12 deletions(-) diff --git a/.gitignore b/.gitignore index a4045f120..977911dff 100644 --- a/.gitignore +++ b/.gitignore @@ -20,6 +20,7 @@ latex *.ewt *.ewd *.hex +.venv/ cmake_install.cmake CMakeCache.txt settings/ diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 1b5482a57..ecb9eb7ec 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -21,3 +21,4 @@ board:frdm_kl25z # lpc55 has weird error 'ncm_interface' causes a section type conflict with 'ntb_parameters' family:lpc55 family:nuc126 +family:nuc100_120 diff --git a/hw/bsp/kinetis_k/family.c b/hw/bsp/kinetis_k/family.c index 59d80fa18..816c5c87e 100644 --- a/hw/bsp/kinetis_k/family.c +++ b/hw/bsp/kinetis_k/family.c @@ -159,6 +159,7 @@ TU_ATTR_UNUSED void _start(void) { #ifdef __clang__ void _exit (int __status) { + (void) __status; while (1) {} } #endif diff --git a/hw/bsp/kinetis_k32l2/family.c b/hw/bsp/kinetis_k32l2/family.c index 2fcc1b2af..2062b8b18 100644 --- a/hw/bsp/kinetis_k32l2/family.c +++ b/hw/bsp/kinetis_k32l2/family.c @@ -167,6 +167,7 @@ TU_ATTR_UNUSED void _start(void) { #ifdef __clang__ void _exit (int __status) { + (void) __status; while (1) {} } #endif diff --git a/hw/bsp/kinetis_kl/family.c b/hw/bsp/kinetis_kl/family.c index fe864f3a0..000006372 100644 --- a/hw/bsp/kinetis_kl/family.c +++ b/hw/bsp/kinetis_kl/family.c @@ -159,6 +159,7 @@ TU_ATTR_UNUSED void _start(void) { #ifdef __clang__ void _exit (int __status) { + (void) __status; while (1) {} } #endif diff --git a/hw/bsp/lpc17/family.c b/hw/bsp/lpc17/family.c index 7d3231f6a..1edab6cd4 100644 --- a/hw/bsp/lpc17/family.c +++ b/hw/bsp/lpc17/family.c @@ -96,7 +96,11 @@ void board_init(void) { // 0x1B // Host + Device + OTG + AHB }; - uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; +#if CFG_TUD_ENABLED + uint32_t const clk_en = USBCLK_DEVCIE; +#else + uint32_t const clk_en = USBCLK_HOST; +#endif LPC_USB->OTGClkCtrl = clk_en; while ((LPC_USB->OTGClkSt & clk_en) != clk_en) {} diff --git a/hw/bsp/lpc51/family.c b/hw/bsp/lpc51/family.c index 0afe33d41..c963b76bd 100644 --- a/hw/bsp/lpc51/family.c +++ b/hw/bsp/lpc51/family.c @@ -138,6 +138,7 @@ TU_ATTR_UNUSED void _start(void) { #ifdef __clang__ void _exit (int __status) { + (void) __status; while (1) {} } #endif diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index 9b9b5841b..094866d9b 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -233,6 +233,7 @@ TU_ATTR_UNUSED void _start(void) { #ifdef __clang__ void _exit (int __status) { + (void) __status; while (1) {} } #endif diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index dbf8d71b7..f0ded96a7 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -333,6 +333,7 @@ TU_ATTR_UNUSED void _start(void) { #ifdef __clang__ void _exit (int __status) { + (void) __status; while (1) {} } #endif diff --git a/hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/board.cmake b/hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/board.cmake index 79c0d61ca..02198d4c3 100644 --- a/hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/board.cmake +++ b/hw/bsp/nuc100_120/boards/nutiny_sdk_nuc120/board.cmake @@ -2,6 +2,4 @@ set(JLINK_DEVICE NUC120LE3) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/nuc120_flash.ld) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - ) endfunction() diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.cmake b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.cmake index f910b128f..bffeffc37 100644 --- a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.cmake +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc121/board.cmake @@ -3,6 +3,4 @@ set(JLINK_DEVICE NUC121SC2AE) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/nuc121_flash.ld) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - ) endfunction() diff --git a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.cmake b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.cmake index d9bbebfba..7909c0a46 100644 --- a/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.cmake +++ b/hw/bsp/nuc121_125/boards/nutiny_sdk_nuc125/board.cmake @@ -3,6 +3,4 @@ set(JLINK_DEVICE NUC125SC2AE) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/nuc125_flash.ld) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - ) endfunction() diff --git a/hw/bsp/nuc126/boards/nutiny_nuc126v/board.cmake b/hw/bsp/nuc126/boards/nutiny_nuc126v/board.cmake index ece3e774a..8d5c73e02 100644 --- a/hw/bsp/nuc126/boards/nutiny_nuc126v/board.cmake +++ b/hw/bsp/nuc126/boards/nutiny_nuc126v/board.cmake @@ -2,6 +2,4 @@ set(JLINK_DEVICE NUC126VG4AE) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/nuc126_flash.ld) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - ) endfunction() diff --git a/hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.cmake b/hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.cmake index 079231dc5..2ece10e33 100644 --- a/hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.cmake +++ b/hw/bsp/nuc505/boards/nutiny_sdk_nuc505/board.cmake @@ -2,6 +2,4 @@ set(JLINK_DEVICE NUC505YO13Y) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/nuc505_flashtoram.ld) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - ) endfunction() diff --git a/tools/get_deps.py b/tools/get_deps.py index c1e2c075d..35f3b3e92 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -51,7 +51,7 @@ deps_optional = { 'nrf'], 'hw/mcu/nuvoton': ['https://github.com/majbthrd/nuc_driver.git', '2204191ec76283371419fbcec207da02e1bc22fa', - 'nuc'], + 'nuc100_120 nuc121_125 nuc126 nuc505'], 'hw/mcu/nxp/lpcopen': ['https://github.com/hathach/nxp_lpcopen.git', 'b41cf930e65c734d8ec6de04f1d57d46787c76ae', 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43'], -- cgit v1.3.1 From fd9d43d7c5785f4d5337bce1e5d5cede86b709c7 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 19:31:16 +0700 Subject: refactor spresense into cxd56. there is no orphan board in bsp. --- examples/device/uac2_headset/src/usb_descriptors.c | 6 +- hw/bsp/cxd56/FreeRTOSConfig/FreeRTOSConfig.h | 150 +++++++++++++++++++++ hw/bsp/cxd56/boards/spresense/board.cmake | 6 + hw/bsp/cxd56/boards/spresense/board.h | 43 ++++++ hw/bsp/cxd56/boards/spresense/board.mk | 7 + hw/bsp/cxd56/family.c | 112 +++++++++++++++ hw/bsp/cxd56/family.cmake | 135 +++++++++++++++++++ hw/bsp/cxd56/family.mk | 70 ++++++++++ hw/bsp/family_support.mk | 28 +--- hw/bsp/fomu/family.mk | 2 +- hw/bsp/spresense/board.mk | 75 ----------- hw/bsp/spresense/board_spresense.c | 105 --------------- src/common/tusb_mcu.h | 1 + src/portable/sony/cxd56/dcd_cxd56.c | 13 ++ 14 files changed, 548 insertions(+), 205 deletions(-) create mode 100644 hw/bsp/cxd56/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/cxd56/boards/spresense/board.cmake create mode 100644 hw/bsp/cxd56/boards/spresense/board.h create mode 100644 hw/bsp/cxd56/boards/spresense/board.mk create mode 100644 hw/bsp/cxd56/family.c create mode 100644 hw/bsp/cxd56/family.cmake create mode 100644 hw/bsp/cxd56/family.mk delete mode 100644 hw/bsp/spresense/board.mk delete mode 100644 hw/bsp/spresense/board_spresense.c diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index bc9160d5e..fc12c122e 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -87,9 +87,9 @@ uint8_t const * tud_descriptor_device_cb(void) #elif CFG_TUSB_MCU == OPT_MCU_CXD56 // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) - // #define EPNUM_AUDIO_IN 0x01 - // #define EPNUM_AUDIO_OUT 0x02 - // #define EPNUM_AUDIO_INT 0x03 + #define EPNUM_AUDIO_IN 0x01 + #define EPNUM_AUDIO_OUT 0x02 + #define EPNUM_AUDIO_INT 0x03 #elif CFG_TUSB_MCU == OPT_MCU_NRF5X // ISO endpoints for NRF5x are fixed to 0x08 (0x88) diff --git a/hw/bsp/cxd56/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/cxd56/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..57b9d7dba --- /dev/null +++ b/hw/bsp/cxd56/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,150 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "nuttx/config.h" +#endif + +/* Cortex-M4F port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +// CXD56 (Cortex-M4F) has 3 priority bits +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< + +#define LED_PIN PIN_I2S1_BCK +#define BUTTON_PIN PIN_HIF_IRQ_OUT + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/cxd56/boards/spresense/board.mk b/hw/bsp/cxd56/boards/spresense/board.mk new file mode 100644 index 000000000..6c31c9d9d --- /dev/null +++ b/hw/bsp/cxd56/boards/spresense/board.mk @@ -0,0 +1,7 @@ +# Spresense board configuration +SERIAL ?= /dev/ttyUSB0 + +# flash +flash: $(BUILD)/$(PROJECT).spk + @echo FLASH $< + @$(PYTHON) $(TOP)/hw/mcu/sony/cxd56/tools/flash_writer.py -s -c $(SERIAL) -d -b 115200 -n $< diff --git a/hw/bsp/cxd56/family.c b/hw/bsp/cxd56/family.c new file mode 100644 index 000000000..a8e2fd52b --- /dev/null +++ b/hw/bsp/cxd56/family.c @@ -0,0 +1,112 @@ +/* + * The MIT License (MIT) + * + * Copyright 2019 Sony Semiconductor Solutions Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" +#endif + +#include +#include + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" +#include "board.h" + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void) +{ + boardctl(BOARDIOC_INIT, 0); + + board_gpio_write(PIN_I2S1_BCK, -1); + board_gpio_config(PIN_I2S1_BCK, 0, false, true, PIN_FLOAT); + + board_gpio_write(PIN_HIF_IRQ_OUT, -1); + board_gpio_config(PIN_HIF_IRQ_OUT, 0, true, true, PIN_FLOAT); +}; + +void board_late_initialize(void) { + +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +// Turn LED on or off +void board_led_write(bool state) +{ + board_gpio_write(LED_PIN, state); +} + +// Get the current state of button +// a '1' means active (pressed), a '0' means inactive. +uint32_t board_button_read(void) +{ + if (board_gpio_read(BUTTON_PIN)) + { + return 0; + } + + return 1; +} + +// Get characters from UART +int board_uart_read(uint8_t *buf, int len) +{ + int r = read(0, buf, len); + + return r; +} + +// Send characters to UART +int board_uart_write(void const *buf, int len) +{ + int r = write(1, buf, len); + + return r; +} + +// Get current milliseconds +uint32_t board_millis(void) +{ + struct timespec tp; + + /* Wait until RTC is available */ + while (g_rtc_enabled == false); + + if (clock_gettime(CLOCK_MONOTONIC, &tp)) + { + return 0; + } + + return (((uint64_t)tp.tv_sec) * 1000 + tp.tv_nsec / 1000000); +} diff --git a/hw/bsp/cxd56/family.cmake b/hw/bsp/cxd56/family.cmake new file mode 100644 index 000000000..993f8f456 --- /dev/null +++ b/hw/bsp/cxd56/family.cmake @@ -0,0 +1,135 @@ +include_guard() + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +set(SDK_DIR ${TOP}/hw/mcu/sony/cxd56/spresense-exported-sdk) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS CXD56 CACHE INTERNAL "") + +# Detect platform for mkspk tool +set(PLATFORM ${CMAKE_SYSTEM_NAME}) +if(PLATFORM STREQUAL "Darwin") + set(MKSPK ${TOP}/hw/mcu/sony/cxd56/mkspk/mkspk) +elseif(PLATFORM STREQUAL "Linux") + set(MKSPK ${TOP}/hw/mcu/sony/cxd56/mkspk/mkspk) +else() + set(MKSPK ${TOP}/hw/mcu/sony/cxd56/mkspk/mkspk.exe) +endif() + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(LD_FILE_GNU ${SDK_DIR}/nuttx/scripts/ramconfig.ld) + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + # Spresense uses NuttX libraries + add_library(${BOARD_TARGET} INTERFACE) + + target_include_directories(${BOARD_TARGET} INTERFACE + ${SDK_DIR}/nuttx/include + ${SDK_DIR}/nuttx/arch + ${SDK_DIR}/nuttx/arch/chip + ${SDK_DIR}/nuttx/arch/os + ${SDK_DIR}/sdk/include + ) + + target_compile_definitions(${BOARD_TARGET} INTERFACE + CONFIG_HAVE_DOUBLE + main=spresense_main + ) + + target_compile_options(${BOARD_TARGET} INTERFACE + -pipe + -fno-builtin + -fno-strength-reduce + -fomit-frame-pointer + -Wno-error=undef + -Wno-error=cast-align + -Wno-error=unused-parameter + -Wno-error=shadow + -Wno-error=redundant-decls + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} INTERFACE + "LINKER:--script=${LD_FILE_GNU}" + -Xlinker --entry=__start + -nostartfiles + -nodefaultlibs + -Wl,--gc-sections + -u spresense_main + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} INTERFACE + "LINKER:--script=${LD_FILE_Clang}" + -Xlinker --entry=__start + -nostartfiles + -nodefaultlibs + -u spresense_main + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_CXD56) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/sony/cxd56/dcd_cxd56.c + ) + target_link_libraries(${TARGET} PUBLIC + board_${BOARD} + ${SDK_DIR}/nuttx/libs/libapps.a + ${SDK_DIR}/nuttx/libs/libnuttx.a + gcc # Compiler runtime support for FP operations like __aeabi_dmul + ) + + # Build mkspk tool + add_custom_command(OUTPUT ${MKSPK} + COMMAND $(MAKE) -C ${TOP}/hw/mcu/sony/cxd56/mkspk + COMMENT "Building mkspk tool" + ) + + # Create .spk file + add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.spk + COMMAND ${MKSPK} -c 2 $ nuttx ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.spk + DEPENDS ${TARGET} ${MKSPK} + COMMENT "Creating ${TARGET}.spk" + ) +endfunction() diff --git a/hw/bsp/cxd56/family.mk b/hw/bsp/cxd56/family.mk new file mode 100644 index 000000000..adfe9ee82 --- /dev/null +++ b/hw/bsp/cxd56/family.mk @@ -0,0 +1,70 @@ +include $(TOP)/$(BOARD_PATH)/board.mk + +# Platforms are: Linux, Darwin, MSYS, CYGWIN +PLATFORM := $(firstword $(subst _, ,$(shell uname -s 2>/dev/null))) + +ifeq ($(PLATFORM),Darwin) + # macOS + MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk +else ifeq ($(PLATFORM),Linux) + # Linux + MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk +else + # Cygwin/MSYS2 + MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk.exe +endif + +CFLAGS += \ + -DCONFIG_HAVE_DOUBLE \ + -Dmain=spresense_main \ + -pipe \ + -std=gnu11 \ + -fno-strength-reduce \ + -fomit-frame-pointer \ + -Wno-error=undef \ + -Wno-error=cast-align \ + -Wno-error=unused-parameter \ + -DCFG_TUSB_MCU=OPT_MCU_CXD56 \ + +CPU_CORE ?= cortex-m4 + +# suppress following warnings from mcu driver +# lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration +CFLAGS += -Wno-error=shadow -Wno-error=redundant-decls + +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + +SPRESENSE_SDK = $(TOP)/hw/mcu/sony/cxd56/spresense-exported-sdk + +SRC_C += src/portable/sony/cxd56/dcd_cxd56.c + +INC += \ + $(SPRESENSE_SDK)/nuttx/include \ + $(SPRESENSE_SDK)/nuttx/arch \ + $(SPRESENSE_SDK)/nuttx/arch/chip \ + $(SPRESENSE_SDK)/nuttx/arch/os \ + $(SPRESENSE_SDK)/sdk/include \ + $(TOP)/$(BOARD_PATH) + +LIBS += \ + $(SPRESENSE_SDK)/nuttx/libs/libapps.a \ + $(SPRESENSE_SDK)/nuttx/libs/libnuttx.a \ + +LD_FILE = hw/mcu/sony/cxd56/spresense-exported-sdk/nuttx/scripts/ramconfig.ld + +LDFLAGS += \ + -Xlinker --entry=__start \ + -nostartfiles \ + -nodefaultlibs \ + -Wl,--gc-sections \ + -u spresense_main + +$(MKSPK): $(BUILD)/$(PROJECT).elf + $(MAKE) -C $(TOP)/hw/mcu/sony/cxd56/mkspk + +$(BUILD)/$(PROJECT).spk: $(MKSPK) + @echo CREATE $@ + @$(MKSPK) -c 2 $(BUILD)/$(PROJECT).elf nuttx $@ + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F diff --git a/hw/bsp/family_support.mk b/hw/bsp/family_support.mk index 2e236dc4a..db410a657 100644 --- a/hw/bsp/family_support.mk +++ b/hw/bsp/family_support.mk @@ -64,34 +64,20 @@ BUILD := _build/$(BOARD) PROJECT := $(notdir $(CURDIR)) #------------------------------------------------------------- -# Board / Family +# Family and Board #------------------------------------------------------------- - -# Board without family -ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) - BOARD_PATH := hw/bsp/$(BOARD) - FAMILY := -endif - -# Board within family -ifeq ($(BOARD_PATH),) - BOARD_PATH := $(subst $(TOP)/,,$(wildcard $(TOP)/hw/bsp/*/boards/$(BOARD))) - FAMILY := $(word 3, $(subst /, ,$(BOARD_PATH))) - FAMILY_PATH = hw/bsp/$(FAMILY) -endif +BOARD_PATH := $(subst $(TOP)/,,$(wildcard $(TOP)/hw/bsp/*/boards/$(BOARD))) +FAMILY := $(word 3, $(subst /, ,$(BOARD_PATH))) +FAMILY_PATH = hw/bsp/$(FAMILY) ifeq ($(BOARD_PATH),) $(info You must provide a BOARD parameter with 'BOARD=') $(error Invalid BOARD specified) endif -ifeq ($(FAMILY),) - include $(TOP)/hw/bsp/$(BOARD)/board.mk -else - # Include Family and Board specific defs - include $(TOP)/$(FAMILY_PATH)/family.mk - SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) -endif +# Include Family and Board specific defs +include $(TOP)/$(FAMILY_PATH)/family.mk +SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) #------------------------------------------------------------- # Source files and compiler flags diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index 69a546964..c29b1c70f 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -27,7 +27,7 @@ FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V # flash using dfu-util $(BUILD)/$(PROJECT).dfu: $(BUILD)/$(PROJECT).bin @echo "Create $@" - python $(TOP)/hw/bsp/$(BOARD)/dfu.py -b $^ -D 0x1209:0x5bf0 $@ + python $(TOP)/$(FAMILY_PATH)/dfu.py -b $^ -D 0x1209:0x5bf0 $@ flash: $(BUILD)/$(PROJECT).dfu dfu-util -D $^ diff --git a/hw/bsp/spresense/board.mk b/hw/bsp/spresense/board.mk deleted file mode 100644 index 24f39d2b6..000000000 --- a/hw/bsp/spresense/board.mk +++ /dev/null @@ -1,75 +0,0 @@ -# Platforms are: Linux, Darwin, MSYS, CYGWIN -PLATFORM := $(firstword $(subst _, ,$(shell uname -s 2>/dev/null))) - -ifeq ($(PLATFORM),Darwin) - # macOS - MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk -else ifeq ($(PLATFORM),Linux) - # Linux - MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk -else - # Cygwin/MSYS2 - MKSPK = $(TOP)/hw/mcu/sony/cxd56/mkspk/mkspk.exe -endif - -SERIAL ?= /dev/ttyUSB0 - -CFLAGS += \ - -DCONFIG_HAVE_DOUBLE \ - -Dmain=spresense_main \ - -pipe \ - -std=gnu11 \ - -mcpu=cortex-m4 \ - -mthumb \ - -mfpu=fpv4-sp-d16 \ - -mfloat-abi=hard \ - -mabi=aapcs \ - -fno-builtin \ - -fno-strength-reduce \ - -fomit-frame-pointer \ - -Wno-error=undef \ - -Wno-error=cast-align \ - -Wno-error=unused-parameter \ - -DCFG_TUSB_MCU=OPT_MCU_CXD56 \ - -# suppress following warnings from mcu driver -# lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration -CFLAGS += -Wno-error=shadow -Wno-error=redundant-decls - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -SPRESENSE_SDK = $(TOP)/hw/mcu/sony/cxd56/spresense-exported-sdk - -SRC_C += src/portable/sony/cxd56/dcd_cxd56.c - -INC += \ - $(SPRESENSE_SDK)/nuttx/include \ - $(SPRESENSE_SDK)/nuttx/arch \ - $(SPRESENSE_SDK)/nuttx/arch/chip \ - $(SPRESENSE_SDK)/nuttx/arch/os \ - $(SPRESENSE_SDK)/sdk/include \ - -LIBS += \ - $(SPRESENSE_SDK)/nuttx/libs/libapps.a \ - $(SPRESENSE_SDK)/nuttx/libs/libnuttx.a \ - -LD_FILE = hw/mcu/sony/cxd56/spresense-exported-sdk/nuttx/scripts/ramconfig.ld - -LDFLAGS += \ - -Xlinker --entry=__start \ - -nostartfiles \ - -nodefaultlibs \ - -Wl,--gc-sections \ - -u spresense_main - -$(MKSPK): $(BUILD)/$(PROJECT).elf - $(MAKE) -C $(TOP)/hw/mcu/sony/cxd56/mkspk - -$(BUILD)/$(PROJECT).spk: $(MKSPK) - @echo CREATE $@ - @$(MKSPK) -c 2 $(BUILD)/$(PROJECT).elf nuttx $@ - -# flash -flash: $(BUILD)/$(PROJECT).spk - @echo FLASH $< - @$(PYTHON) $(TOP)/hw/mcu/sony/cxd56/tools/flash_writer.py -s -c $(SERIAL) -d -b 115200 -n $< diff --git a/hw/bsp/spresense/board_spresense.c b/hw/bsp/spresense/board_spresense.c deleted file mode 100644 index 8cd04a49d..000000000 --- a/hw/bsp/spresense/board_spresense.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright 2019 Sony Semiconductor Solutions Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include -#include -#include -#include - -#include "bsp/board_api.h" - -/*------------------------------------------------------------------*/ -/* MACRO TYPEDEF CONSTANT ENUM - *------------------------------------------------------------------*/ -#define LED_PIN PIN_I2S1_BCK - -#define BUTTON_PIN PIN_HIF_IRQ_OUT - -// Initialize on-board peripherals : led, button, uart and USB -void board_init(void) -{ - boardctl(BOARDIOC_INIT, 0); - - board_gpio_write(PIN_I2S1_BCK, -1); - board_gpio_config(PIN_I2S1_BCK, 0, false, true, PIN_FLOAT); - - board_gpio_write(PIN_HIF_IRQ_OUT, -1); - board_gpio_config(PIN_HIF_IRQ_OUT, 0, true, true, PIN_FLOAT); -}; - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -// Turn LED on or off -void board_led_write(bool state) -{ - board_gpio_write(LED_PIN, state); -} - -// Get the current state of button -// a '1' means active (pressed), a '0' means inactive. -uint32_t board_button_read(void) -{ - if (board_gpio_read(BUTTON_PIN)) - { - return 0; - } - - return 1; -} - -// Get characters from UART -int board_uart_read(uint8_t *buf, int len) -{ - int r = read(0, buf, len); - - return r; -} - -// Send characters to UART -int board_uart_write(void const *buf, int len) -{ - int r = write(1, buf, len); - - return r; -} - -// Get current milliseconds -uint32_t board_millis(void) -{ - struct timespec tp; - - /* Wait until RTC is available */ - while (g_rtc_enabled == false); - - if (clock_gettime(CLOCK_MONOTONIC, &tp)) - { - return 0; - } - - return (((uint64_t)tp.tv_sec) * 1000 + tp.tv_nsec / 1000000); -} diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index d0a502367..0b8ed1059 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -359,6 +359,7 @@ #define TUP_DCD_ENDPOINT_MAX 7 #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY + #define TUP_DCD_EDPT_ISO_ALLOC //--------------------------------------------------------------------+ // TI diff --git a/src/portable/sony/cxd56/dcd_cxd56.c b/src/portable/sony/cxd56/dcd_cxd56.c index b16509c6f..a13cd152c 100644 --- a/src/portable/sony/cxd56/dcd_cxd56.c +++ b/src/portable/sony/cxd56/dcd_cxd56.c @@ -339,6 +339,19 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) return true; } +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; // TODO not implemented yet +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { + (void) rhport; + (void) desc_ep; + return false; // TODO not implemented yet +} + void dcd_edpt_close_all (uint8_t rhport) { (void) rhport; -- cgit v1.3.1 From d96d468b55ae7db21740502059034300fb147638 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 Oct 2025 19:58:59 +0700 Subject: skip mtp in hil test, it seems not stable and failed too often --- test/hil/hil_test.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 5bb3a60a1..3a11cee13 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -584,7 +584,7 @@ device_tests = [ 'device/dfu_runtime', 'device/cdc_msc_freertos', 'device/hid_boot_interface', - 'device/mtp' + # 'device/mtp' ] dual_tests = [ -- cgit v1.3.1 From 4dfac3f3566268450b46f1c19899b0b53bf48706 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Wed, 15 Oct 2025 20:37:04 +0700 Subject: Update hw/bsp/same7x/boards/same70_qmtech/board.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- hw/bsp/same7x/boards/same70_qmtech/board.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/bsp/same7x/boards/same70_qmtech/board.h b/hw/bsp/same7x/boards/same70_qmtech/board.h index 09c2c93a9..0309e3e6c 100644 --- a/hw/bsp/same7x/boards/same70_qmtech/board.h +++ b/hw/bsp/same7x/boards/same70_qmtech/board.h @@ -46,7 +46,7 @@ extern "C" { #define BUTTON_PORT_CLOCK ID_PIOA #define UART_TX_PIN GPIO(GPIO_PORTB, 1) -#define UART_TX_FUNCTION MUX_PB4D_USART1_TXD1 +#define UART_TX_FUNCTION MUX_PB1D_USART1_TXD1 #define UART_RX_PIN GPIO(GPIO_PORTB, 0) #define UART_RX_FUNCTION MUX_PA21A_USART1_RXD1 #define UART_PORT_CLOCK ID_USART1 -- cgit v1.3.1 From e93e47ae0434b53a20d1c62de62f34377bc8b492 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Oct 2025 10:03:10 +0700 Subject: add tu_div_round_nearest() (only handle positive) to replace DIV_ROUND_CLOSEST() to remove the need of typeof --- src/class/cdc/cdc_host.c | 4 ++-- src/class/cdc/serial/ftdi_sio.h | 13 ------------- src/common/tusb_common.h | 37 ++++++++++++++++++++----------------- 3 files changed, 22 insertions(+), 32 deletions(-) diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index beef03eff..b59b0d641 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -1365,7 +1365,7 @@ static uint32_t ftdi_232bm_baud_base_to_divisor(uint32_t baud, uint32_t base) { uint8_t divfrac[8] = {0, 3, 2, 4, 1, 5, 6, 7}; uint32_t divisor; /* divisor shifted 3 bits to the left */ - uint32_t divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud); + uint32_t divisor3 = tu_div_round_nearest(base, 2 * baud); divisor = divisor3 >> 3; divisor |= (uint32_t) divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ @@ -1387,7 +1387,7 @@ static uint32_t ftdi_2232h_baud_base_to_divisor(uint32_t baud, uint32_t base) { uint32_t divisor3; /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ - divisor3 = DIV_ROUND_CLOSEST(8 * base, 10 * baud); + divisor3 = tu_div_round_nearest(8 * base, 10 * baud); divisor = divisor3 >> 3; divisor |= (uint32_t) divfrac[divisor3 & 0x7] << 14; diff --git a/src/class/cdc/serial/ftdi_sio.h b/src/class/cdc/serial/ftdi_sio.h index 8abf74f11..9bd56cef4 100644 --- a/src/class/cdc/serial/ftdi_sio.h +++ b/src/class/cdc/serial/ftdi_sio.h @@ -215,17 +215,4 @@ typedef struct ftdi_private { #define FTDI_NOT_POSSIBLE -1 #define FTDI_REQUESTED -2 -// division and round function overtaken from math.h -#define DIV_ROUND_CLOSEST(x, divisor)( \ -{ \ - typeof(x) __x = x; \ - typeof(divisor) __d = divisor; \ - (((typeof(x))-1) > 0 || \ - ((typeof(divisor))-1) > 0 || \ - (((__x) > 0) == ((__d) > 0))) ? \ - (((__x) + ((__d) / 2)) / (__d)) : \ - (((__x) - ((__d) / 2)) / (__d)); \ -} \ -) - #endif //TUSB_FTDI_SIO_H diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 6393652a3..50c1be2c6 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -34,30 +34,31 @@ //--------------------------------------------------------------------+ // Macros Helper //--------------------------------------------------------------------+ -#define TU_ARRAY_SIZE(_arr) ( sizeof(_arr) / sizeof(_arr[0]) ) +#define TU_ARRAY_SIZE(_arr) ( sizeof(_arr) / sizeof(_arr[0]) ) #define TU_FIELD_SIZE(_type, _field) (sizeof(((_type *)0)->_field)) -#define TU_MIN(_x, _y) ( ( (_x) < (_y) ) ? (_x) : (_y) ) -#define TU_MAX(_x, _y) ( ( (_x) > (_y) ) ? (_x) : (_y) ) -#define TU_DIV_CEIL(n, d) (((n) + (d) - 1) / (d)) +#define TU_MIN(_x, _y) ( ( (_x) < (_y) ) ? (_x) : (_y) ) +#define TU_MAX(_x, _y) ( ( (_x) > (_y) ) ? (_x) : (_y) ) +#define TU_DIV_CEIL(n, d) (((n) + (d) - 1) / (d)) +#define TU_DIV_ROUND_NEAREST(v, d) (((v) + (d)/2) / (d) ) // round to nearest integer -#define TU_U16(_high, _low) ((uint16_t) (((_high) << 8) | (_low))) -#define TU_U16_HIGH(_u16) ((uint8_t) (((_u16) >> 8) & 0x00ff)) -#define TU_U16_LOW(_u16) ((uint8_t) ((_u16) & 0x00ff)) -#define U16_TO_U8S_BE(_u16) TU_U16_HIGH(_u16), TU_U16_LOW(_u16) -#define U16_TO_U8S_LE(_u16) TU_U16_LOW(_u16), TU_U16_HIGH(_u16) +#define TU_U16(_high, _low) ((uint16_t) (((_high) << 8) | (_low))) +#define TU_U16_HIGH(_u16) ((uint8_t) (((_u16) >> 8) & 0x00ff)) +#define TU_U16_LOW(_u16) ((uint8_t) ((_u16) & 0x00ff)) +#define U16_TO_U8S_BE(_u16) TU_U16_HIGH(_u16), TU_U16_LOW(_u16) +#define U16_TO_U8S_LE(_u16) TU_U16_LOW(_u16), TU_U16_HIGH(_u16) -#define TU_U32_BYTE3(_u32) ((uint8_t) ((((uint32_t) _u32) >> 24) & 0x000000ff)) // MSB -#define TU_U32_BYTE2(_u32) ((uint8_t) ((((uint32_t) _u32) >> 16) & 0x000000ff)) -#define TU_U32_BYTE1(_u32) ((uint8_t) ((((uint32_t) _u32) >> 8) & 0x000000ff)) -#define TU_U32_BYTE0(_u32) ((uint8_t) (((uint32_t) _u32) & 0x000000ff)) // LSB +#define TU_U32_BYTE3(_u32) ((uint8_t) ((((uint32_t) _u32) >> 24) & 0x000000ff)) // MSB +#define TU_U32_BYTE2(_u32) ((uint8_t) ((((uint32_t) _u32) >> 16) & 0x000000ff)) +#define TU_U32_BYTE1(_u32) ((uint8_t) ((((uint32_t) _u32) >> 8) & 0x000000ff)) +#define TU_U32_BYTE0(_u32) ((uint8_t) (((uint32_t) _u32) & 0x000000ff)) // LSB -#define U32_TO_U8S_BE(_u32) TU_U32_BYTE3(_u32), TU_U32_BYTE2(_u32), TU_U32_BYTE1(_u32), TU_U32_BYTE0(_u32) -#define U32_TO_U8S_LE(_u32) TU_U32_BYTE0(_u32), TU_U32_BYTE1(_u32), TU_U32_BYTE2(_u32), TU_U32_BYTE3(_u32) +#define U32_TO_U8S_BE(_u32) TU_U32_BYTE3(_u32), TU_U32_BYTE2(_u32), TU_U32_BYTE1(_u32), TU_U32_BYTE0(_u32) +#define U32_TO_U8S_LE(_u32) TU_U32_BYTE0(_u32), TU_U32_BYTE1(_u32), TU_U32_BYTE2(_u32), TU_U32_BYTE3(_u32) -#define TU_BIT(n) (1UL << (n)) +#define TU_BIT(n) (1UL << (n)) // Generate a mask with bit from high (31) to low (0) set, e.g TU_GENMASK(3, 0) = 0b1111 -#define TU_GENMASK(h, l) ( (UINT32_MAX << (l)) & (UINT32_MAX >> (31 - (h))) ) +#define TU_GENMASK(h, l) ( (UINT32_MAX << (l)) & (UINT32_MAX >> (31 - (h))) ) //--------------------------------------------------------------------+ // Includes @@ -215,6 +216,8 @@ TU_ATTR_ALWAYS_INLINE static inline bool tu_is_aligned64(uint64_t value) { retur //------------- Mathematics -------------// TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_div_ceil(uint32_t v, uint32_t d) { return TU_DIV_CEIL(v, d); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_div_round_nearest(uint32_t v, uint32_t d) { return TU_DIV_ROUND_NEAREST(v, d); } + TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_round_up(uint32_t v, uint32_t f) { return tu_div_ceil(v, f) * f; } // log2 of a value is its MSB's position -- cgit v1.3.1 From 2f3b21a1e58e5c03c61e83920d77f8c27540dfd5 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Oct 2025 10:44:22 +0700 Subject: fix some warnings detected by pvs-studio --- examples/device/board_test/src/main.c | 3 +- examples/device/cdc_msc/src/msc_disk.c | 8 +++-- examples/device/cdc_msc_freertos/src/msc_disk.c | 30 ++++------------- .../device/dynamic_configuration/src/msc_disk.c | 39 +++++----------------- examples/device/msc_dual_lun/src/msc_disk_dual.c | 10 +++--- hw/bsp/stm32h7/family.c | 2 +- src/class/cdc/cdc_device.c | 2 +- src/class/cdc/cdc_host.c | 1 - src/common/tusb_types.h | 22 ++++++------ src/device/usbd.h | 4 +-- 10 files changed, 42 insertions(+), 79 deletions(-) diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index d91a8760e..872a97108 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -45,6 +45,7 @@ int main(void) { uint32_t start_ms = 0; bool led_state = false; + const size_t hello_len = strlen(HELLO_STR); while (1) { uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED; @@ -66,7 +67,7 @@ int main(void) { printf(HELLO_STR); #ifndef LOGGER_UART - board_uart_write(HELLO_STR, strlen(HELLO_STR)); + board_uart_write(HELLO_STR, hello_len); #endif } diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 96f9f19ec..6c112aa8b 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -126,9 +126,9 @@ uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uin const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); - memcpy(inquiry_resp->product_id, pid, strlen(pid)); - memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + strncpy((char*) inquiry_resp->vendor_id, vid, 8); + strncpy((char*) inquiry_resp->product_id, pid, 16); + strncpy((char*) inquiry_resp->product_rev, rev, 4); return sizeof(scsi_inquiry_resp_t); // 36 bytes } @@ -242,6 +242,8 @@ int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, u // negative means error -> tinyusb could stall and/or response with failed status return -1; } + + return -1; } #endif diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index c09cf67d6..38345ca4d 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -198,9 +198,9 @@ uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp, uin const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); - memcpy(inquiry_resp->product_id, pid, strlen(pid)); - memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + strncpy((char*) inquiry_resp->vendor_id, vid, 8); + strncpy((char*) inquiry_resp->product_id, pid, 16); + strncpy((char*) inquiry_resp->product_rev, rev, 4); return sizeof(scsi_inquiry_resp_t); // 36 bytes } @@ -324,12 +324,8 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* // - READ10 and WRITE10 has their own callbacks int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) { // read10 & write10 has their own callback and MUST not be handled here - - void const *response = NULL; - int32_t resplen = 0; - - // most scsi handled is input - bool in_xfer = true; + (void) buffer; + (void) bufsize; switch (scsi_cmd[0]) { default: @@ -337,22 +333,10 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // negative means error -> tinyusb could stall and/or response with failed status - resplen = -1; - break; - } - - // return resplen must not larger than bufsize - if (resplen > bufsize) { resplen = bufsize; } - - if (response && (resplen > 0)) { - if (in_xfer) { - memcpy(buffer, response, (size_t) resplen); - } else { - // SCSI output - } + return -1; } - return (int32_t) resplen; + return -1; } #endif diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index ebc86e260..e57f9e3f3 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -126,9 +126,9 @@ uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uin const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); - memcpy(inquiry_resp->product_id, pid, strlen(pid)); - memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + strncpy((char*) inquiry_resp->vendor_id, vid, 8); + strncpy((char*) inquiry_resp->product_id, pid, 16); + strncpy((char*) inquiry_resp->product_rev, rev, 4); return sizeof(scsi_inquiry_resp_t); // 36 bytes } @@ -211,42 +211,21 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* // Callback invoked when received an SCSI command not in built-in list below // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks -int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) -{ +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) { // read10 & write10 has their own callback and MUST not be handled here + (void) buffer; + (void) bufsize; - void const* response = NULL; - int32_t resplen = 0; - - // most scsi handled is input - bool in_xfer = true; - - switch (scsi_cmd[0]) - { + switch (scsi_cmd[0]) { default: // Set Sense = Invalid Command Operation tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // negative means error -> tinyusb could stall and/or response with failed status - resplen = -1; - break; - } - - // return resplen must not larger than bufsize - if ( resplen > bufsize ) resplen = bufsize; - - if ( response && (resplen > 0) ) - { - if(in_xfer) - { - memcpy(buffer, response, (size_t) resplen); - }else - { - // SCSI output - } + return -1; } - return resplen; + return -1; } #endif diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c index 775fa047e..694da11db 100644 --- a/examples/device/msc_dual_lun/src/msc_disk_dual.c +++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -217,9 +217,9 @@ uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uin const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); - memcpy(inquiry_resp->product_id, pid, strlen(pid)); - memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + strncpy((char*) inquiry_resp->vendor_id, vid, 8); + strncpy((char*) inquiry_resp->product_id, pid, 16); + strncpy((char*) inquiry_resp->product_rev, rev, 4); return sizeof(scsi_inquiry_resp_t); // 36 bytes } @@ -227,9 +227,7 @@ uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uin // Invoked when received Test Unit Ready command. // return true allowing host to read/write this LUN e.g SD card inserted bool tud_msc_test_unit_ready_cb(uint8_t lun) { - if ( lun == 1 && board_button_read() ) return false; - - return true; // RAM disk is always ready + return ( lun == 1 && board_button_read() ) ? false : true; } // Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 382b878b7..4f80b15ff 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -131,7 +131,7 @@ void board_init(void) { #elif CFG_TUSB_OS == OPT_OS_FREERTOS // Explicitly disable systick to prevent its ISR runs before scheduler start - SysTick->CTRL &= ~1U; + SysTick->CTRL &= ~1UL; // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) #ifdef USB_OTG_FS_PERIPH_BASE diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index f1c4a3bbf..577a92a52 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -533,7 +533,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ // Check for wanted char and invoke callback if needed if (((signed char) p_cdc->wanted_char) != -1) { for (uint32_t i = 0; i < xferred_bytes; i++) { - if ((p_cdc->wanted_char == p_epbuf->epout[i]) && !tu_fifo_empty(&p_cdc->rx_ff)) { + if ((p_cdc->wanted_char == (char) p_epbuf->epout[i]) && !tu_fifo_empty(&p_cdc->rx_ff)) { tud_cdc_rx_wanted_cb(itf, p_cdc->wanted_char); } } diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index b59b0d641..3fc6a9adf 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -1136,7 +1136,6 @@ static inline bool ftdi_sio_reset(cdch_interface_t *p_cdc, tuh_xfer_cb_t complet // internal control complete to update state such as line state, line_coding static void ftdi_internal_control_complete(cdch_interface_t* p_cdc, tuh_xfer_t *xfer) { - TU_VERIFY(xfer->result == XFER_RESULT_SUCCESS,); const tusb_control_request_t * setup = xfer->setup; if (xfer->result == XFER_RESULT_SUCCESS) { if (setup->bRequest == FTDI_SIO_SET_MODEM_CTRL_REQUEST && diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index b3ef1e9c9..ec01bbf0f 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -100,10 +100,10 @@ typedef enum { } tusb_xfer_type_t; typedef enum { - TUSB_DIR_OUT = 0, - TUSB_DIR_IN = 1, + TUSB_DIR_OUT = 0u, + TUSB_DIR_IN = 1u, - TUSB_DIR_IN_MASK = 0x80 + TUSB_DIR_IN_MASK = 0x80u } tusb_dir_t; enum { @@ -350,7 +350,7 @@ typedef struct TU_ATTR_PACKED { uint8_t bNumConfigurations ; ///< Number of possible configurations. } tusb_desc_device_t; -TU_VERIFY_STATIC( sizeof(tusb_desc_device_t) == 18, "size is not correct"); +TU_VERIFY_STATIC( sizeof(tusb_desc_device_t) == 18u, "size is not correct"); // USB Binary Device Object Store (BOS) Descriptor typedef struct TU_ATTR_PACKED { @@ -360,7 +360,7 @@ typedef struct TU_ATTR_PACKED { uint8_t bNumDeviceCaps ; ///< Number of device capability descriptors in the BOS } tusb_desc_bos_t; -TU_VERIFY_STATIC( sizeof(tusb_desc_bos_t) == 5, "size is not correct"); +TU_VERIFY_STATIC( sizeof(tusb_desc_bos_t) == 5u, "size is not correct"); /// USB Configuration Descriptor typedef struct TU_ATTR_PACKED { @@ -375,7 +375,7 @@ typedef struct TU_ATTR_PACKED { uint8_t bMaxPower ; ///< Maximum power consumption of the USB device from the bus in this specific configuration when the device is fully operational. Expressed in 2 mA units (i.e., 50 = 100 mA). } tusb_desc_configuration_t; -TU_VERIFY_STATIC( sizeof(tusb_desc_configuration_t) == 9, "size is not correct"); +TU_VERIFY_STATIC( sizeof(tusb_desc_configuration_t) == 9u, "size is not correct"); /// USB Interface Descriptor typedef struct TU_ATTR_PACKED { @@ -391,7 +391,7 @@ typedef struct TU_ATTR_PACKED { uint8_t iInterface ; ///< Index of string descriptor describing this interface } tusb_desc_interface_t; -TU_VERIFY_STATIC( sizeof(tusb_desc_interface_t) == 9, "size is not correct"); +TU_VERIFY_STATIC( sizeof(tusb_desc_interface_t) == 9u, "size is not correct"); /// USB Endpoint Descriptor typedef struct TU_ATTR_PACKED { @@ -411,7 +411,7 @@ typedef struct TU_ATTR_PACKED { uint8_t bInterval ; // Polling interval, in frames or microframes depending on the operating speed } tusb_desc_endpoint_t; -TU_VERIFY_STATIC( sizeof(tusb_desc_endpoint_t) == 7, "size is not correct"); +TU_VERIFY_STATIC( sizeof(tusb_desc_endpoint_t) == 7u, "size is not correct"); /// USB Other Speed Configuration Descriptor typedef struct TU_ATTR_PACKED { @@ -441,7 +441,7 @@ typedef struct TU_ATTR_PACKED { uint8_t bReserved ; ///< Reserved for future use, must be zero } tusb_desc_device_qualifier_t; -TU_VERIFY_STATIC( sizeof(tusb_desc_device_qualifier_t) == 10, "size is not correct"); +TU_VERIFY_STATIC( sizeof(tusb_desc_device_qualifier_t) == 10u, "size is not correct"); /// USB Interface Association Descriptor (IAD ECN) typedef struct TU_ATTR_PACKED { @@ -458,7 +458,7 @@ typedef struct TU_ATTR_PACKED { uint8_t iFunction ; ///< Index of the string descriptor describing the interface association. } tusb_desc_interface_assoc_t; -TU_VERIFY_STATIC( sizeof(tusb_desc_interface_assoc_t) == 8, "size is not correct"); +TU_VERIFY_STATIC( sizeof(tusb_desc_interface_assoc_t) == 8u, "size is not correct"); // USB String Descriptor typedef struct TU_ATTR_PACKED { @@ -528,7 +528,7 @@ typedef struct TU_ATTR_PACKED { uint16_t wLength; } tusb_control_request_t; -TU_VERIFY_STATIC( sizeof(tusb_control_request_t) == 8, "size is not correct"); +TU_VERIFY_STATIC( sizeof(tusb_control_request_t) == 8u, "size is not correct"); TU_ATTR_PACKED_END // End of all packed definitions TU_ATTR_BIT_FIELD_ORDER_END diff --git a/src/device/usbd.h b/src/device/usbd.h index a4104e47d..c62986150 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -299,7 +299,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval #define TUD_HID_DESCRIPTOR(_itfnum, _stridx, _boot_protocol, _report_desc_len, _epin, _epsize, _ep_interval) \ /* Interface */\ - 9, TUSB_DESC_INTERFACE, _itfnum, 0, 1, TUSB_CLASS_HID, (uint8_t)((_boot_protocol) ? (uint8_t)HID_SUBCLASS_BOOT : 0), _boot_protocol, _stridx,\ + 9, TUSB_DESC_INTERFACE, _itfnum, 0, 1, TUSB_CLASS_HID, (uint8_t)((_boot_protocol != HID_ITF_PROTOCOL_NONE) ? (uint8_t)HID_SUBCLASS_BOOT : 0u), _boot_protocol, _stridx,\ /* HID descriptor */\ 9, HID_DESC_TYPE_HID, U16_TO_U8S_LE(0x0111), 0, 1, HID_DESC_TYPE_REPORT, U16_TO_U8S_LE(_report_desc_len),\ /* Endpoint In */\ @@ -312,7 +312,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ // Interface number, string index, protocol, report descriptor len, EP OUT & IN address, size & polling interval #define TUD_HID_INOUT_DESCRIPTOR(_itfnum, _stridx, _boot_protocol, _report_desc_len, _epout, _epin, _epsize, _ep_interval) \ /* Interface */\ - 9, TUSB_DESC_INTERFACE, _itfnum, 0, 2, TUSB_CLASS_HID, (uint8_t)((_boot_protocol) ? (uint8_t)HID_SUBCLASS_BOOT : 0), _boot_protocol, _stridx,\ + 9, TUSB_DESC_INTERFACE, _itfnum, 0, 2, TUSB_CLASS_HID, (uint8_t)((_boot_protocol != HID_ITF_PROTOCOL_NONE) ? (uint8_t)HID_SUBCLASS_BOOT : 0u), _boot_protocol, _stridx,\ /* HID descriptor */\ 9, HID_DESC_TYPE_HID, U16_TO_U8S_LE(0x0111), 0, 1, HID_DESC_TYPE_REPORT, U16_TO_U8S_LE(_report_desc_len),\ /* Endpoint Out */\ -- cgit v1.3.1 From e4ff88f3640458f820838efd047a3831333446d8 Mon Sep 17 00:00:00 2001 From: c1570 Date: Mon, 22 Sep 2025 23:31:13 +0200 Subject: WIP improved docs (feat. LLM) --- docs/conf.py | 20 ++ docs/explanation/architecture.rst | 305 +++++++++++++++++++++++ docs/explanation/index.rst | 11 + docs/explanation/usb_concepts.rst | 352 ++++++++++++++++++++++++++ docs/faq.rst | 210 ++++++++++++++++ docs/guides/index.rst | 10 + docs/guides/integration.rst | 494 +++++++++++++++++++++++++++++++++++++ docs/index.rst | 64 ++++- docs/reference/concurrency.rst | 10 +- docs/reference/configuration.rst | 296 ++++++++++++++++++++++ docs/reference/dependencies.rst | 2 +- docs/reference/getting_started.rst | 269 -------------------- docs/reference/glossary.rst | 89 +++++++ docs/reference/index.rst | 12 +- docs/reference/usb_classes.rst | 290 ++++++++++++++++++++++ docs/troubleshooting.rst | 318 ++++++++++++++++++++++++ docs/tutorials/first_device.rst | 147 +++++++++++ docs/tutorials/first_host.rst | 160 ++++++++++++ docs/tutorials/getting_started.rst | 293 ++++++++++++++++++++++ docs/tutorials/index.rst | 12 + 20 files changed, 3079 insertions(+), 285 deletions(-) create mode 100644 docs/explanation/architecture.rst create mode 100644 docs/explanation/index.rst create mode 100644 docs/explanation/usb_concepts.rst create mode 100644 docs/faq.rst create mode 100644 docs/guides/index.rst create mode 100644 docs/guides/integration.rst create mode 100644 docs/reference/configuration.rst delete mode 100644 docs/reference/getting_started.rst create mode 100644 docs/reference/glossary.rst create mode 100644 docs/reference/usb_classes.rst create mode 100644 docs/troubleshooting.rst create mode 100644 docs/tutorials/first_device.rst create mode 100644 docs/tutorials/first_host.rst create mode 100644 docs/tutorials/getting_started.rst create mode 100644 docs/tutorials/index.rst diff --git a/docs/conf.py b/docs/conf.py index 4249d41f7..be9aeaaf9 100755 --- a/docs/conf.py +++ b/docs/conf.py @@ -24,9 +24,29 @@ extensions = [ 'sphinx.ext.autodoc', 'sphinx.ext.intersphinx', 'sphinx.ext.todo', + 'sphinx.ext.viewcode', + 'sphinx.ext.napoleon', 'sphinx_autodoc_typehints', ] +# Autodoc configuration +autodoc_default_options = { + 'members': True, + 'undoc-members': True, + 'show-inheritance': True, +} + +# Napoleon configuration for Google/NumPy style docstrings +napoleon_google_docstring = True +napoleon_numpy_docstring = True +napoleon_include_init_with_doc = False +napoleon_include_private_with_doc = False + +# Intersphinx mapping for cross-references +intersphinx_mapping = { + 'python': ('https://docs.python.org/3', None), +} + templates_path = ['_templates'] exclude_patterns = ['_build'] diff --git a/docs/explanation/architecture.rst b/docs/explanation/architecture.rst new file mode 100644 index 000000000..4c63b198d --- /dev/null +++ b/docs/explanation/architecture.rst @@ -0,0 +1,305 @@ +************ +Architecture +************ + +This document explains TinyUSB's internal architecture, design principles, and how different components work together. + +Design Principles +================= + +Memory Safety +------------- + +TinyUSB is designed for resource-constrained embedded systems with strict memory requirements: + +- **No dynamic allocation**: All memory is statically allocated at compile time +- **Bounded buffers**: All buffers have compile-time defined sizes +- **Stack-based design**: No heap usage in the core stack +- **Predictable memory usage**: Memory consumption is deterministic + +Thread Safety +------------- + +TinyUSB achieves thread safety through a deferred interrupt model: + +- **ISR deferral**: USB interrupts are captured and deferred to task context +- **Single-threaded processing**: All USB protocol handling occurs in task context +- **Queue-based design**: Events are queued from ISR and processed in ``tud_task()`` +- **RTOS integration**: Proper semaphore/mutex usage for shared resources + +Portability +----------- + +The stack is designed to work across diverse microcontroller families: + +- **Hardware abstraction**: MCU-specific code isolated in portable drivers +- **OS abstraction**: RTOS dependencies isolated in OSAL layer +- **Modular design**: Features can be enabled/disabled at compile time +- **Standard compliance**: Strict adherence to USB specifications + +Core Architecture +================= + +Layer Structure +--------------- + +TinyUSB follows a layered architecture from hardware to application: + +.. code-block:: none + + ┌─────────────────────────────────────────┐ + │ Application Layer │ ← Your code + ├─────────────────────────────────────────┤ + │ USB Class Drivers │ ← CDC, HID, MSC, etc. + ├─────────────────────────────────────────┤ + │ Device/Host Stack Core │ ← USB protocol handling + ├─────────────────────────────────────────┤ + │ Hardware Abstraction (DCD/HCD) │ ← MCU-specific drivers + ├─────────────────────────────────────────┤ + │ OS Abstraction (OSAL) │ ← RTOS integration + ├─────────────────────────────────────────┤ + │ Common Utilities & FIFO │ ← Shared components + └─────────────────────────────────────────┘ + +Component Overview +------------------ + +**Application Layer**: Your main application code that uses TinyUSB APIs. + +**Class Drivers**: Implement specific USB device classes (CDC, HID, MSC, etc.) and handle class-specific requests. + +**Device/Host Core**: Implements USB protocol state machines, endpoint management, and core USB functionality. + +**Hardware Abstraction**: MCU-specific code that interfaces with USB peripheral hardware. + +**OS Abstraction**: Provides threading primitives and synchronization for different RTOS environments. + +**Common Utilities**: Shared code including FIFO implementations, binary helpers, and utility functions. + +Device Stack Architecture +========================= + +Core Components +--------------- + +**Device Controller Driver (DCD)**: +- MCU-specific USB device peripheral driver +- Handles endpoint configuration and data transfers +- Abstracts hardware differences between MCU families +- Located in ``src/portable/VENDOR/FAMILY/`` + +**USB Device Core (USBD)**: +- Implements USB device state machine +- Handles standard USB requests (Chapter 9) +- Manages device configuration and enumeration +- Located in ``src/device/`` + +**Class Drivers**: +- Implement USB class specifications +- Handle class-specific requests and data transfer +- Provide application APIs +- Located in ``src/class/*/`` + +Data Flow +--------- + +**Control Transfers (Setup Requests)**: + +.. code-block:: none + + USB Bus → DCD → USBD Core → Class Driver → Application + ↓ + Standard requests handled in core + ↓ + Class-specific requests → Class Driver + +**Data Transfers**: + +.. code-block:: none + + Application → Class Driver → USBD Core → DCD → USB Bus + USB Bus → DCD → USBD Core → Class Driver → Application + +Event Processing +---------------- + +TinyUSB uses a deferred interrupt model for thread safety: + +1. **Interrupt Occurs**: USB hardware generates interrupt +2. **ISR Handler**: ``dcd_int_handler()`` captures event, minimal processing +3. **Event Queuing**: Events queued for later processing +4. **Task Processing**: ``tud_task()`` (called by application code) processes queued events +5. **Callback Execution**: Application callbacks executed in task context + +.. code-block:: none + + USB IRQ → ISR → Event Queue → tud_task() → Class Callbacks → Application + +Host Stack Architecture +======================= + +Core Components +--------------- + +**Host Controller Driver (HCD)**: +- MCU-specific USB host peripheral driver +- Manages USB pipes and data transfers +- Handles host controller hardware +- Located in ``src/portable/VENDOR/FAMILY/`` + +**USB Host Core (USBH)**: +- Implements USB host functionality +- Manages device enumeration and configuration +- Handles pipe management and scheduling +- Located in ``src/host/`` + +**Hub Driver**: +- Manages USB hub devices +- Handles port management and device detection +- Supports multi-level hub topologies +- Located in ``src/host/`` + +Device Enumeration +------------------ + +The host stack follows USB enumeration process: + +1. **Device Detection**: Hub or root hub detects device connection +2. **Reset and Address**: Reset device, assign unique address +3. **Descriptor Retrieval**: Get device, configuration, and class descriptors +4. **Driver Matching**: Find appropriate class driver for device +5. **Configuration**: Configure device and start communication +6. **Class Operation**: Normal class-specific communication + +.. code-block:: none + + Device Connect → Reset → Get Descriptors → Load Driver → Configure → Operate + +Class Architecture +================== + +Common Class Structure +---------------------- + +All USB classes follow a similar architecture: + +**Device Classes**: +- ``*_device.c``: Device-side implementation +- ``*_device.h``: Device API definitions +- Implement class-specific descriptors +- Handle class requests and data transfer + +**Host Classes**: +- ``*_host.c``: Host-side implementation +- ``*_host.h``: Host API definitions +- Manage connected devices of this class +- Provide application interface + +Class Driver Interface +---------------------- + +**Required Functions**: +- ``init()``: Initialize class driver +- ``reset()``: Reset class state +- ``open()``: Configure class endpoints +- ``control_xfer_cb()``: Handle control requests +- ``xfer_cb()``: Handle data transfer completion + +**Optional Functions**: +- ``close()``: Clean up class resources +- ``sof_cb()``: Start-of-frame processing + +Descriptor Management +--------------------- + +Each class is responsible for: +- **Interface Descriptors**: Define class type and endpoints +- **Class-Specific Descriptors**: Additional class requirements +- **Endpoint Descriptors**: Define data transfer characteristics + +Memory Management +================= + +Static Allocation Model +----------------------- + +TinyUSB uses only static memory allocation: + +- **Endpoint Buffers**: Fixed-size buffers for each endpoint +- **Class Buffers**: Static buffers for class-specific data +- **Control Buffers**: Fixed buffer for control transfers +- **Queue Buffers**: Static event queues + +Buffer Management +----------------- + +**Endpoint Buffers**: +- Allocated per endpoint at compile time +- Size defined by ``CFG_TUD_*_EP_BUFSIZE`` macros +- Used for USB data transfers + +**FIFO Buffers**: +- Ring buffers for streaming data +- Size defined by ``CFG_TUD_*_RX/TX_BUFSIZE`` macros +- Separate read/write pointers + +**DMA Considerations**: +- Buffers must be DMA-accessible on some MCUs +- Alignment requirements vary by hardware +- Cache coherency handled in portable drivers + +Threading Model +=============== + +Task-Based Design +----------------- + +TinyUSB uses a cooperative task model: + +- **Main Tasks**: ``tud_task()`` for device, ``tuh_task()`` for host +- **Regular Execution**: Tasks must be called regularly (< 1ms typical) +- **Event Processing**: All USB events processed in task context +- **Callback Execution**: Application callbacks run in task context + +RTOS Integration +---------------- + +**Bare Metal**: +- Application calls ``tud_task()`` in main loop +- No threading primitives needed +- Simplest integration method + +**FreeRTOS**: +- USB task runs at high priority +- Semaphores used for synchronization +- Queue for inter-task communication + +**Other RTOS**: +- Similar patterns with RTOS-specific primitives +- OSAL layer abstracts RTOS differences + +Interrupt Handling +------------------ + +**Interrupt Service Routine**: +- Minimal processing in ISR +- Event capture and queuing only +- Quick return to avoid blocking + +**Deferred Processing**: +- All complex processing in task context +- Thread-safe access to data structures +- Application callbacks in known context + +Memory Usage Patterns +--------------------- + +**Flash Memory**: +- Core stack: 8-15KB depending on features +- Each class: 1-4KB additional +- Portable driver: 2-8KB depending on MCU + +**RAM Usage**: +- Core stack: 1-2KB +- Endpoint buffers: User configurable +- Class buffers: Depends on configuration diff --git a/docs/explanation/index.rst b/docs/explanation/index.rst new file mode 100644 index 000000000..695efd9e0 --- /dev/null +++ b/docs/explanation/index.rst @@ -0,0 +1,11 @@ +*********** +Explanation +*********** + +Deep understanding of TinyUSB's design, architecture, and concepts. + +.. toctree:: + :maxdepth: 2 + + architecture + usb_concepts \ No newline at end of file diff --git a/docs/explanation/usb_concepts.rst b/docs/explanation/usb_concepts.rst new file mode 100644 index 000000000..02ba76770 --- /dev/null +++ b/docs/explanation/usb_concepts.rst @@ -0,0 +1,352 @@ +************ +USB Concepts +************ + +This document provides a brief introduction to USB protocol fundamentals that are essential for understanding TinyUSB development. + +USB Protocol Basics +==================== + +Universal Serial Bus (USB) is a standardized communication protocol designed for connecting devices to hosts (typically computers). Understanding these core concepts is essential for effective TinyUSB development. + +Host and Device Roles +---------------------- + +**USB Host**: The controlling side of a USB connection (typically a computer). The host: +- Initiates all communication +- Provides power to devices +- Manages the USB bus +- Enumerates and configures devices + +**TinyUSB Host Stack**: Enable with ``CFG_TUH_ENABLED=1`` in ``tusb_config.h``. Call ``tuh_task()`` regularly in your main loop. See :doc:`../tutorials/first_host` for implementation details. + +**USB Device**: The peripheral side (keyboard, mouse, storage device, etc.). Devices: +- Respond to host requests +- Cannot initiate communication +- Receive power from the host +- Must be enumerated by the host before use + +**TinyUSB Device Stack**: Enable with ``CFG_TUD_ENABLED=1`` in ``tusb_config.h``. Call ``tud_task()`` regularly in your main loop. See :doc:`../tutorials/first_device` for implementation details. + +**OTG (On-The-Go)**: Some devices can switch between host and device roles dynamically. **TinyUSB Support**: Both stacks can be enabled simultaneously on OTG-capable hardware. See ``examples/dual/`` for dual-role implementations. + +USB Transfers +============= + +Every USB transfer consists of the host issuing a request, and the device replying to that request. The host is the bus master and initiates all communication. +Devices cannot initiate sending data; for unsolicited incoming data, polling is used by the host. + +USB defines four transfer types, each intended for different use cases: + +Control Transfers +----------------- + +Used for device configuration and control commands. + +**Characteristics**: +- Bidirectional (uses both IN and OUT) +- Guaranteed delivery with error detection +- Limited data size (8-64 bytes per packet) +- All devices must support control transfers on endpoint 0 + +**Usage**: Device enumeration, configuration changes, class-specific commands + +**TinyUSB Context**: Handled automatically by the core stack for standard requests; class drivers handle class-specific requests. Endpoint 0 is managed by ``src/device/usbd.c`` and ``src/host/usbh.c``. Configure buffer size with ``CFG_TUD_ENDPOINT0_SIZE`` (typically 64 bytes). + +Bulk Transfers +-------------- + +Used for large amounts of data that don't require guaranteed timing. + +**Characteristics**: +- Unidirectional (separate IN and OUT endpoints) +- Guaranteed delivery with error detection +- Large packet sizes (up to 512 bytes for High Speed) +- Uses available bandwidth when no other transfers are active + +**Usage**: File transfers, large data communication, CDC serial data + +**TinyUSB Context**: Used by MSC (mass storage) and CDC classes for data transfer. Configure endpoint buffer sizes with ``CFG_TUD_MSC_EP_BUFSIZE`` and ``CFG_TUD_CDC_EP_BUFSIZE``. See ``src/class/msc/`` and ``src/class/cdc/`` for implementation details. + +Interrupt Transfers +------------------- + +Used for small, time-sensitive data with guaranteed maximum latency. + +**Characteristics**: +- Unidirectional (separate IN and OUT endpoints) +- Guaranteed delivery with error detection +- Small packet sizes (up to 64 bytes for Full Speed) +- Regular polling interval (1ms to 255ms) + +**Usage**: Keyboard/mouse input, sensor data, status updates + +**TinyUSB Context**: Used by HID class for input reports. Configure with ``CFG_TUD_HID`` and ``CFG_TUD_HID_EP_BUFSIZE``. Send reports using ``tud_hid_report()`` or ``tud_hid_keyboard_report()``. See ``src/class/hid/`` and HID examples in ``examples/device/hid_*/``. + +Isochronous Transfers +--------------------- + +Used for time-critical streaming data. + +**Characteristics**: +- Unidirectional (separate IN and OUT endpoints) +- No error correction (speed over reliability) +- Guaranteed bandwidth +- Real-time delivery + +**Usage**: Audio, video streaming + +**TinyUSB Context**: Used by Audio class for streaming audio data. Configure with ``CFG_TUD_AUDIO`` and related audio configuration macros. See ``src/class/audio/`` and audio examples in ``examples/device/audio_*/`` for UAC2 implementation. + +Endpoints and Addressing +========================= + +Endpoint Basics +--------------- + +**Endpoint**: A communication channel between host and device. + +- Each endpoint has a number (0-15) and direction +- Endpoint 0 is reserved for control transfers +- Other endpoints are assigned by device class requirements + +**TinyUSB Endpoint Management**: Configure maximum endpoints with ``CFG_TUD_ENDPOINT_MAX``. Endpoints are automatically allocated by enabled classes. See your board's ``usb_descriptors.c`` for endpoint assignments. + +**Direction**: +- **OUT**: Host to device (host sends data out) +- **IN**: Device to host (host reads data in) +- Note that in TinyUSB code, for ``tx``/``rx``, the device perspective is used typically: E.g., ``tud_cdc_tx_complete_cb()`` designates the callback executed once the device has completed sending data to the host (in device mode). + +**Addressing**: Endpoints are addressed as EPx IN/OUT (e.g., EP1 IN, EP2 OUT) + +Endpoint Configuration +---------------------- + +Each endpoint is configured with: +- **Transfer type**: Control, bulk, interrupt, or isochronous +- **Direction**: IN, OUT, or bidirectional (control only) +- **Maximum packet size**: Depends on USB speed and transfer type +- **Interval**: For interrupt and isochronous endpoints + +**TinyUSB Configuration**: Endpoint characteristics are defined in descriptors (``usb_descriptors.c``) and automatically configured by the stack. Buffer sizes are set via ``CFG_TUD_*_EP_BUFSIZE`` macros. + +Error Handling and Flow Control +------------------------------- + +**Transfer Results**: USB transfers can complete with different results: +- **ACK**: Successful transfer +- **NAK**: Device not ready (used for flow control) +- **STALL**: Error condition or unsupported request +- **Timeout**: Transfer failed to complete in time + +**Flow Control in USB**: Unlike network protocols, USB doesn't use congestion control. Instead: +- Devices use NAK responses when not ready to receive data +- Applications implement buffering and proper timing +- Some classes (like CDC) support hardware flow control (RTS/CTS) + +**TinyUSB Handling**: Transfer results are represented as ``xfer_result_t`` enum values. The stack automatically handles NAK responses and timing. STALL conditions indicate application-level errors that should be addressed in class drivers. + +USB Device States +================= + +A USB device progresses through several states: + +1. **Attached**: Device is physically connected +2. **Powered**: Device receives power from host +3. **Default**: Device responds to address 0 +4. **Address**: Device has been assigned a unique address +5. **Configured**: Device is ready for normal operation +6. **Suspended**: Device is in low-power state + +**TinyUSB State Management**: State transitions are handled automatically by ``src/device/usbd.c``. You can implement ``tud_mount_cb()`` and ``tud_umount_cb()`` to respond to configuration changes, and ``tud_suspend_cb()``/``tud_resume_cb()`` for power management. + +Device Enumeration Process +========================== + +When a device is connected, the host follows this process: + +1. **Detection**: Host detects device connection +2. **Reset**: Host resets the device +3. **Descriptor Requests**: Host requests device descriptors +4. **Address Assignment**: Host assigns unique address to device +5. **Configuration**: Host selects and configures device +6. **Class Loading**: Host loads appropriate drivers +7. **Normal Operation**: Device is ready for use + +**TinyUSB Role**: The device stack handles steps 1-6 automatically; your application handles step 7. + +USB Descriptors +=============== + +Descriptors are data structures that describe device capabilities: + +Device Descriptor +----------------- +Describes the device (VID, PID, USB version, etc.) + +Configuration Descriptor +------------------------ +Describes device configuration (power requirements, interfaces, etc.) + +Interface Descriptor +-------------------- +Describes a functional interface (class, endpoints, etc.) + +Endpoint Descriptor +------------------- +Describes endpoint characteristics (type, direction, size, etc.) + +String Descriptors +------------------ +Human-readable strings (manufacturer, product name, etc.) + +**TinyUSB Implementation**: You provide descriptors in ``usb_descriptors.c`` via callback functions: +- ``tud_descriptor_device_cb()`` - Device descriptor +- ``tud_descriptor_configuration_cb()`` - Configuration descriptor +- ``tud_descriptor_string_cb()`` - String descriptors + +The stack automatically handles descriptor requests during enumeration. See examples in ``examples/device/*/usb_descriptors.c`` for reference implementations. + +USB Classes +=========== + +USB classes define standardized protocols for device types: + +**Class Code**: Identifies the device type in descriptors +**Class Driver**: Software that implements the class protocol +**Class Requests**: Standardized commands for the class + +**Common TinyUSB-Supported Classes**: +- **CDC (02h)**: Communication devices (virtual serial ports) - Enable with ``CFG_TUD_CDC`` +- **HID (03h)**: Human interface devices (keyboards, mice) - Enable with ``CFG_TUD_HID`` +- **MSC (08h)**: Mass storage devices (USB drives) - Enable with ``CFG_TUD_MSC`` +- **Audio (01h)**: Audio devices (speakers, microphones) - Enable with ``CFG_TUD_AUDIO`` +- **MIDI**: MIDI devices - Enable with ``CFG_TUD_MIDI`` +- **DFU**: Device Firmware Update - Enable with ``CFG_TUD_DFU`` +- **Vendor**: Custom vendor classes - Enable with ``CFG_TUD_VENDOR`` + +See :doc:`../reference/usb_classes` for detailed class information and :doc:`../reference/configuration` for configuration options. + +USB Speeds +========== + +USB supports multiple speed modes: + +**Low Speed (1.5 Mbps)**: +- Simple devices (mice, keyboards) +- Limited endpoint types and sizes + +**Full Speed (12 Mbps)**: +- Most common for embedded devices +- All transfer types supported +- Maximum packet sizes: Control (64), Bulk (64), Interrupt (64) + +**High Speed (480 Mbps)**: +- High-performance devices +- Larger packet sizes: Control (64), Bulk (512), Interrupt (1024) +- Requires more complex hardware + +**Super Speed (5 Gbps)**: +- USB 3.0 and later +- Not supported by TinyUSB + +**TinyUSB Speed Support**: Most TinyUSB ports support Full Speed and High Speed. Speed is typically auto-detected by hardware. Configure speed requirements in board configuration (``hw/bsp/FAMILY/boards/BOARD/board.mk``) and ensure your MCU supports the desired speed. + +USB Device Controllers +====================== + +USB device controllers are hardware peripherals that handle the low-level USB protocol implementation. Understanding how they work helps explain TinyUSB's architecture and portability. + +Controller Fundamentals +----------------------- + +**What Controllers Do**: +- Handle USB signaling and protocol timing +- Manage endpoint buffers and data transfers +- Generate interrupts for USB events +- Implement USB electrical specifications + +**Key Components**: +- **Physical Layer**: USB signal drivers and receivers +- **Protocol Engine**: Handles USB packets, ACK/NAK responses +- **Endpoint Buffers**: Hardware FIFOs or RAM for data storage +- **Interrupt Controller**: Generates events for software processing + +Controller Architecture Types +----------------------------- + +Different MCU vendors implement USB controllers with varying architectures. +To list a few common patterns: + +**FIFO-Based Controllers** (e.g., STM32 OTG, NXP LPC): +- Shared or dedicated FIFOs for endpoint data +- Software manages FIFO allocation and data flow +- Common in higher-end MCUs with flexible configurations + +**Buffer-Based Controllers** (e.g., STM32 FSDEV, Microchip SAMD, RP2040): +- Fixed packet memory areas for each endpoint +- Hardware automatically handles packet placement +- Simpler programming model, common in smaller MCUs + +**Descriptor-Based Controllers** (e.g., NXP EHCI-style): +- Use descriptor chains to describe transfers +- Hardware processes transfer descriptors independently +- More complex but can handle larger transfers autonomously + +TinyUSB Controller Abstraction +------------------------------ + +TinyUSB abstracts controller differences through the TinyUSB **Device Controller Driver (DCD)** layer. +These internal details don't matter to users of TinyUSB typically; however, when debugging, knowledge about internal details helps sometimes. + +**Portable Interface** (``src/device/usbd.h``): +- Standardized function signatures for all controllers +- Common endpoint and transfer management APIs +- Unified interrupt and event handling + +**Controller-Specific Drivers** (``src/portable/VENDOR/FAMILY/``): +- Implement the DCD interface for specific hardware +- Handle vendor-specific register layouts and behaviors +- Manage controller-specific quirks and workarounds + +**Common DCD Functions**: +- ``dcd_init()`` - Initialize controller hardware +- ``dcd_edpt_open()`` - Configure endpoint with type and size +- ``dcd_edpt_xfer()`` - Start data transfer on endpoint +- ``dcd_int_handler()`` - Process USB interrupts +- ``dcd_connect()/dcd_disconnect()`` - Control USB bus connection + +Controller Event Flow +--------------------- + +**Typical USB Event Processing**: + +1. **Hardware Event**: USB controller detects bus activity (setup packet, data transfer, etc.) +2. **Interrupt Generation**: Controller generates interrupt to CPU +3. **ISR Processing**: ``dcd_int_handler()`` reads controller status +4. **Event Queuing**: Events are queued for later processing (thread safety) +5. **Task Processing**: ``tud_task()`` processes queued events +6. **Class Notification**: Appropriate class drivers handle the event +7. **Application Callback**: User code responds to the event + +Power Management +================ + +USB provides power to devices: + +**Bus-Powered**: Device draws power from USB bus (up to 500mA) +**Self-Powered**: Device has its own power source +**Suspend/Resume**: Devices must enter low-power mode when bus is idle + +**TinyUSB Power Management**: +- Implement ``tud_suspend_cb()`` and ``tud_resume_cb()`` for power management +- Configure power requirements in device descriptor (``bMaxPower`` field) +- Use ``tud_remote_wakeup()`` to wake the host from suspend (if supported) +- Enable remote wakeup with ``CFG_TUD_USBD_ENABLE_REMOTE_WAKEUP`` + +Next Steps +========== + +- Start with :doc:`../tutorials/getting_started` for basic setup +- Review :doc:`../reference/configuration` for configuration options +- Check :doc:`../guides/integration` for advanced integration scenarios diff --git a/docs/faq.rst b/docs/faq.rst new file mode 100644 index 000000000..ede97032d --- /dev/null +++ b/docs/faq.rst @@ -0,0 +1,210 @@ +************************** +Frequently Asked Questions +************************** + +General Questions +================= + +**Q: What microcontrollers does TinyUSB support?** + +TinyUSB supports 30+ MCU families including STM32, RP2040, NXP (iMXRT, Kinetis, LPC), Microchip SAM, Nordic nRF5x, ESP32, and many others. See :doc:`reference/boards` for the complete list. + +**Q: Can I use TinyUSB in commercial projects?** + +Yes, TinyUSB is released under the MIT license, allowing commercial use with minimal restrictions. + +**Q: Does TinyUSB require an RTOS?** + +No, TinyUSB works in bare metal environments. It also supports FreeRTOS, RT-Thread, and Mynewt. + +**Q: How much memory does TinyUSB use?** + +Typical usage: 8-20KB flash, 1-4KB RAM depending on enabled classes and configuration. The stack uses static allocation only. + +Build and Setup +================ + +**Q: Why do I get "arm-none-eabi-gcc: command not found"?** + +Install the ARM GCC toolchain: ``sudo apt-get install gcc-arm-none-eabi`` on Ubuntu/Debian, or download from ARM's website for other platforms. + +**Q: Build fails with "Board 'X' not found"** + +Check available boards: ``ls hw/bsp/FAMILY/boards/`` or run ``python tools/build.py -l`` to list all supported boards. + +**Q: What are the dependencies and how do I get them?** + +Run ``python tools/get_deps.py FAMILY`` where FAMILY is your MCU family (e.g., stm32f4, rp2040). This downloads MCU-specific drivers and libraries. + +**Q: Can I use my own build system instead of Make/CMake?** + +Yes, just add all ``.c`` files from ``src/`` to your project and configure include paths. See :doc:`guides/integration` for details. + +**Q: Error: "tusb_config.h: No such file or directory"** + +This is a very common issue. You need to create ``tusb_config.h`` in your project and ensure it's in your include path. The file must define ``CFG_TUSB_MCU`` and ``CFG_TUSB_OS`` at minimum. Copy from ``examples/device/*/tusb_config.h`` as a starting point. + +**Q: RP2040 + pico-sdk ignores my tusb_config.h settings** + +The pico-sdk build system can override ``tusb_config.h`` settings. The ``CFG_TUSB_OS`` setting is often ignored because pico-sdk sets it to ``OPT_OS_PICO`` internally. Use pico-sdk specific configuration methods or modify the CMake configuration. + +**Q: "multiple definition of dcd_..." errors with STM32** + +This happens when multiple USB drivers are included. Ensure you're only including the correct portable driver for your STM32 family. Check that ``CFG_TUSB_MCU`` is set correctly and you don't have conflicting source files. + +Device Development +================== + +**Q: My USB device isn't recognized by the host** + +Common causes: +- Invalid USB descriptors - validate with ``LOG=2`` build +- ``tud_task()`` not called regularly in main loop +- Incorrect ``tusb_config.h`` settings +- USB cable doesn't support data (charging-only cable) + +**Q: Windows shows "Device Descriptor Request Failed"** + +This typically indicates: +- Malformed device descriptor +- USB timing issues (check crystal/clock configuration) +- Power supply problems during enumeration +- Conflicting devices on the same USB hub + +**Q: How do I implement a custom USB class?** + +Use the vendor class interface (``CFG_TUD_VENDOR``) or implement a custom class driver. See ``src/class/vendor/`` for examples. + +**Q: Can I have multiple configurations or interfaces?** + +Yes, TinyUSB supports multiple configurations and composite devices. Modify the descriptors in ``usb_descriptors.c`` accordingly. + +**Q: How do I change Vendor ID/Product ID?** + +Edit the device descriptor in ``usb_descriptors.c``. For production, obtain your own VID from USB-IF or use one from your silicon vendor. + +**Q: Device works alone but fails when connected through USB hub** + +This is a known issue where some devices interfere with each other when connected to the same hub. Try: +- Using different USB hubs +- Connecting devices to separate USB ports +- Checking for power supply issues with the hub + +Host Development +================ + +**Q: Why doesn't my host application detect any devices?** + +Check: +- Power supply - host mode requires more power than device mode +- USB connector type - use USB-A for host applications +- Board supports host mode on the selected port +- Enable logging with ``LOG=2`` to see enumeration details + +**Q: Can I connect multiple devices simultaneously?** + +Yes, through a USB hub. TinyUSB supports multi-level hubs and multiple device connections. + +**Q: Does TinyUSB support USB 3.0?** + +No, TinyUSB currently supports USB 2.0 and earlier. USB 3.0 devices typically work in USB 2.0 compatibility mode. + +Configuration and Features +========================== + +**Q: How do I enable/disable specific USB classes?** + +Edit ``tusb_config.h`` and set the corresponding ``CFG_TUD_*`` or ``CFG_TUH_*`` macros to 1 (enable) or 0 (disable). + +**Q: Can I use both device and host modes simultaneously?** + +Yes, with dual-role/OTG capable hardware. See ``examples/dual/`` for implementation examples. + +**Q: How do I optimize for code size?** + +- Disable unused classes in ``tusb_config.h`` +- Use ``CFG_TUSB_DEBUG = 0`` for release builds +- Compile with ``-Os`` optimization +- Consider using only required endpoints/interfaces + +**Q: Does TinyUSB support low power/suspend modes?** + +Yes, TinyUSB handles USB suspend/resume. Implement ``tud_suspend_cb()`` and ``tud_resume_cb()`` for custom power management. + +**Q: What CFG_TUSB_MCU should I use for x86/PC platforms?** + +For PC/motherboard applications, there's no standard MCU option. You may need to use a generic option or modify TinyUSB for your specific use case. Consider using libusb or other PC-specific USB libraries instead. + +**Q: RP2040 FreeRTOS configuration issues** + +The RP2040 pico-sdk has specific requirements for FreeRTOS integration. The ``CFG_TUSB_OS`` setting may be overridden by the SDK. Use pico-sdk specific configuration methods and ensure proper task stack sizes for the USB task. + +Debugging and Troubleshooting +============================= + +**Q: How do I debug USB communication issues?** + +1. Enable logging: build with ``LOG=2`` +2. Use ``LOGGER=rtt`` or ``LOGGER=swo`` for high-speed logging +3. Use USB protocol analyzers for detailed traffic analysis +4. Check with different host systems (Windows/Linux/macOS) + +**Q: My application crashes or hard faults** + +Common causes: +- Stack overflow - increase stack size in linker script +- Incorrect interrupt configuration +- Buffer overruns in USB callbacks +- Build with ``DEBUG=1`` and use a debugger + +**Q: Performance is poor or USB transfers are slow** + +- Ensure ``tud_task()``/``tuh_task()`` called frequently (< 1ms intervals) +- Use DMA for USB transfers if supported by your MCU +- Optimize endpoint buffer sizes +- Consider using high-speed USB if available + +**Q: Some USB devices don't work with my host application** + +- Not all devices follow USB standards perfectly +- Some may need device-specific handling +- Composite devices may have partial support +- Check device descriptors and implement custom drivers if needed + +**Q: ESP32-S3 USB host/device issues** + +ESP32-S3 has specific USB implementation challenges: +- Ensure proper USB pin configuration +- Check power supply requirements for host mode +- Some features may be limited compared to other MCUs +- Use ESP32-S3 specific examples and documentation + +STM32CubeIDE Integration +======================== + +**Q: How do I integrate TinyUSB with STM32CubeIDE?** + +1. In STM32CubeMX, enable USB_OTG_FS/HS under Connectivity, set to "Device_Only" mode +2. Enable the USB global interrupt in NVIC Settings +3. Add ``tusb.h`` include and call ``tusb_init()`` in main.c +4. Call ``tud_task()`` in your main loop +5. In the generated ``stm32xxx_it.c``, modify the USB IRQ handler to call ``tud_int_handler(0)`` +6. Create ``tusb_config.h`` and ``usb_descriptors.c`` files + +**Q: STM32CubeIDE generated code conflicts with TinyUSB** + +Don't use STM32's built-in USB middleware (USB Device Library) when using TinyUSB. Disable USB code generation in STM32CubeMX and let TinyUSB handle all USB functionality. + +**Q: STM32 USB interrupt handler setup** + +Replace the generated USB interrupt handler with a call to TinyUSB: + +.. code-block:: c + + void OTG_FS_IRQHandler(void) { + tud_int_handler(0); + } + +**Q: Which STM32 families work best with TinyUSB?** + +STM32F4, F7, and H7 families have the most mature TinyUSB support. STM32F0, F1, F3, L4 families are also supported but may have more limitations. Check the supported boards list for your specific variant. \ No newline at end of file diff --git a/docs/guides/index.rst b/docs/guides/index.rst new file mode 100644 index 000000000..cad3dd27f --- /dev/null +++ b/docs/guides/index.rst @@ -0,0 +1,10 @@ +********** +How-to Guides +********** + +Problem-solving guides for common TinyUSB development tasks. + +.. toctree:: + :maxdepth: 2 + + integration \ No newline at end of file diff --git a/docs/guides/integration.rst b/docs/guides/integration.rst new file mode 100644 index 000000000..c135c5ec6 --- /dev/null +++ b/docs/guides/integration.rst @@ -0,0 +1,494 @@ +********************* +Integration Guide +********************* + +This guide covers integrating TinyUSB into production projects with your own build system, custom hardware, and specific requirements. + +Project Integration Methods +============================ + +Method 1: Git Submodule (Recommended) +-------------------------------------- + +Best for projects using git version control. + +.. code-block:: bash + + # Add TinyUSB as submodule + git submodule add https://github.com/hathach/tinyusb.git lib/tinyusb + git submodule update --init --recursive + +**Advantages:** +- Pinned to specific TinyUSB version +- Easy to update with ``git submodule update`` +- Version control tracks exact TinyUSB commit + +Method 2: Package Manager Integration +------------------------------------- + +**PlatformIO:** + +.. code-block:: ini + + ; platformio.ini + [env:myboard] + platform = your_platform + board = your_board + framework = arduino ; or other framework + lib_deps = + https://github.com/hathach/tinyusb.git + +**CMake FetchContent:** + +.. code-block:: cmake + + include(FetchContent) + FetchContent_Declare( + tinyusb + GIT_REPOSITORY https://github.com/hathach/tinyusb.git + GIT_TAG master # or specific version tag + ) + FetchContent_MakeAvailable(tinyusb) + +Method 3: Direct Copy +--------------------- + +Copy TinyUSB source files directly into your project. + +.. code-block:: bash + + # Copy only source files + cp -r tinyusb/src/ your_project/lib/tinyusb/ + +**Note:** You'll need to manually update when TinyUSB releases new versions. + +Build System Integration +======================== + +Make/GCC Integration +-------------------- + +**Makefile example:** + +.. code-block:: make + + # TinyUSB settings + TUSB_DIR = lib/tinyusb + TUSB_SRC_DIR = $(TUSB_DIR)/src + + # Include paths + CFLAGS += -I$(TUSB_SRC_DIR) + CFLAGS += -I. # For tusb_config.h + + # MCU and OS settings (pass to compiler) + CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_STM32F4 + CFLAGS += -DCFG_TUSB_OS=OPT_OS_NONE + + # TinyUSB source files + SRC_C += $(wildcard $(TUSB_SRC_DIR)/*.c) + SRC_C += $(wildcard $(TUSB_SRC_DIR)/common/*.c) + SRC_C += $(wildcard $(TUSB_SRC_DIR)/device/*.c) + SRC_C += $(wildcard $(TUSB_SRC_DIR)/class/*/*.c) + SRC_C += $(wildcard $(TUSB_SRC_DIR)/portable/$(VENDOR)/$(CHIP_FAMILY)/*.c) + +**Finding the right portable driver:** + +.. code-block:: bash + + # List available drivers + find lib/tinyusb/src/portable -name "*.c" | grep stm32 + # Use: lib/tinyusb/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + +CMake Integration +----------------- + +**CMakeLists.txt example:** + +.. code-block:: cmake + + # TinyUSB configuration + set(FAMILY_MCUS STM32F4) # Set your MCU family + set(CFG_TUSB_MCU OPT_MCU_STM32F4) + set(CFG_TUSB_OS OPT_OS_FREERTOS) # or OPT_OS_NONE + + # Add TinyUSB + add_subdirectory(lib/tinyusb) + + # Your project + add_executable(your_app + src/main.c + src/usb_descriptors.c + # other sources + ) + + # Link TinyUSB + target_link_libraries(your_app + tinyusb_device # or tinyusb_host + # other libraries + ) + + # Include paths + target_include_directories(your_app PRIVATE + src/ # For tusb_config.h + ) + + # Compile definitions + target_compile_definitions(your_app PRIVATE + CFG_TUSB_MCU=${CFG_TUSB_MCU} + CFG_TUSB_OS=${CFG_TUSB_OS} + ) + +IAR Embedded Workbench +---------------------- + +Use project connection files for easy integration: + +1. Open IAR project +2. Add TinyUSB project connection: ``Tools → Configure Custom Argument Variables`` +3. Create ``TUSB`` group, add ``TUSB_DIR`` variable +4. Import ``tinyusb/tools/iar_template.ipcf`` + +Keil µVision +------------ + +.. code-block:: none + + # Add to project groups: + TinyUSB/Common: src/common/*.c + TinyUSB/Device: src/device/*.c, src/class/*/*.c + TinyUSB/Portable: src/portable/vendor/family/*.c + + # Include paths: + src/ # tusb_config.h location + lib/tinyusb/src/ + + # Preprocessor defines: + CFG_TUSB_MCU=OPT_MCU_STM32F4 + CFG_TUSB_OS=OPT_OS_NONE + +Configuration Setup +=================== + +Create tusb_config.h +-------------------- + +This is the most critical file for TinyUSB integration: + +.. code-block:: c + + // tusb_config.h + #ifndef _TUSB_CONFIG_H_ + #define _TUSB_CONFIG_H_ + + // MCU selection - REQUIRED + #ifndef CFG_TUSB_MCU + #define CFG_TUSB_MCU OPT_MCU_STM32F4 + #endif + + // OS selection - REQUIRED + #ifndef CFG_TUSB_OS + #define CFG_TUSB_OS OPT_OS_NONE + #endif + + // Debug level + #define CFG_TUSB_DEBUG 0 + + // Device stack + #define CFG_TUD_ENABLED 1 + #define CFG_TUD_ENDPOINT0_SIZE 64 + + // Device classes + #define CFG_TUD_CDC 1 + #define CFG_TUD_HID 0 + #define CFG_TUD_MSC 0 + + // CDC configuration + #define CFG_TUD_CDC_EP_BUFSIZE 512 + #define CFG_TUD_CDC_RX_BUFSIZE 512 + #define CFG_TUD_CDC_TX_BUFSIZE 512 + + #endif + +USB Descriptors +--------------- + +Create or modify ``usb_descriptors.c`` for your device: + +.. code-block:: c + + #include "tusb.h" + + // Device descriptor + tusb_desc_device_t const desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .idVendor = 0xCafe, // Your VID + .idProduct = 0x4000, // Your PID + .bcdDevice = 0x0100, + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + .bNumConfigurations = 0x01 + }; + + // Get device descriptor + uint8_t const* tud_descriptor_device_cb(void) { + return (uint8_t const*)&desc_device; + } + + // Configuration descriptor - implement based on your needs + uint8_t const* tud_descriptor_configuration_cb(uint8_t index) { + // Return configuration descriptor + } + + // String descriptors + uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + // Return string descriptors + } + +Application Integration +====================== + +Main Loop Integration +-------------------- + +.. code-block:: c + + #include "tusb.h" + + int main(void) { + // Board/MCU initialization + board_init(); // Your board setup + + // USB stack initialization + tusb_init(); + + while (1) { + // USB device task - MUST be called regularly + tud_task(); + + // Your application code + your_app_task(); + } + } + +Interrupt Handler Setup +----------------------- + +**STM32 example:** + +.. code-block:: c + + // USB interrupt handler + void OTG_FS_IRQHandler(void) { + tud_int_handler(0); + } + +**RP2040 example:** + +.. code-block:: c + + void isr_usbctrl(void) { + tud_int_handler(0); + } + +Class Implementation +-------------------- + +Implement required callbacks for enabled classes: + +.. code-block:: c + + // CDC class callbacks + void tud_cdc_line_coding_cb(uint8_t itf, cdc_line_coding_t const* p_line_coding) { + // Handle line coding changes + } + + void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { + // Handle DTR/RTS changes + } + +RTOS Integration +=============== + +FreeRTOS Integration +------------------- + +.. code-block:: c + + // USB task + void usb_device_task(void* param) { + while (1) { + tud_task(); + vTaskDelay(1); // 1ms delay + } + } + + // Create USB task + xTaskCreate(usb_device_task, "usbd", + 256, NULL, configMAX_PRIORITIES-1, NULL); + +**Configuration:** + +.. code-block:: c + + // In tusb_config.h + #define CFG_TUSB_OS OPT_OS_FREERTOS + #define CFG_TUD_TASK_QUEUE_SZ 16 + +RT-Thread Integration +-------------------- + +.. code-block:: c + + // In tusb_config.h + #define CFG_TUSB_OS OPT_OS_RTTHREAD + + // USB thread + void usb_thread_entry(void* parameter) { + tusb_init(); + while (1) { + tud_task(); + rt_thread_mdelay(1); + } + } + +Custom Hardware Integration +=========================== + +Clock Configuration +------------------- + +USB requires precise 48MHz clock: + +**STM32 example:** + +.. code-block:: c + + // Configure PLL for 48MHz USB clock + RCC_OscInitStruct.PLL.PLLQ = 7; // Adjust for 48MHz + HAL_RCC_OscConfig(&RCC_OscInitStruct); + +**RP2040 example:** + +.. code-block:: c + + // USB clock is automatically configured by SDK + +Pin Configuration +----------------- + +Configure USB pins correctly: + +**STM32 example:** + +.. code-block:: c + + // USB pins: PA11 (DM), PA12 (DP) + GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + +Power Management +--------------- + +For battery-powered applications: + +.. code-block:: c + + // Implement suspend/resume callbacks + void tud_suspend_cb(bool remote_wakeup_en) { + // Enter low power mode + } + + void tud_resume_cb(void) { + // Exit low power mode + } + +Testing and Validation +====================== + +Build Verification +------------------ + +.. code-block:: bash + + # Test build + make clean && make all + + # Check binary size + arm-none-eabi-size build/firmware.elf + + # Verify no undefined symbols + arm-none-eabi-nm build/firmware.elf | grep " U " + +Runtime Testing +--------------- + +1. **Device Recognition**: Check if device appears in system +2. **Enumeration**: Verify all descriptors are valid +3. **Class Functionality**: Test class-specific features +4. **Performance**: Measure transfer rates and latency +5. **Stress Testing**: Long-running tests with connect/disconnect + +Debugging Integration Issues +============================ + +Common Problems +--------------- + +1. **Device not recognized**: Check descriptors and configuration +2. **Build errors**: Verify include paths and source files +3. **Link errors**: Check library dependencies +4. **Runtime crashes**: Enable debug builds and use debugger +5. **Poor performance**: Profile code and optimize critical paths + +Debug Builds +------------ + +.. code-block:: c + + // In tusb_config.h for debugging + #define CFG_TUSB_DEBUG 2 + #define CFG_TUSB_DEBUG_PRINTF printf + +Enable logging to identify issues quickly. + +Production Considerations +========================= + +Code Size Optimization +---------------------- + +.. code-block:: c + + // Minimal configuration + #define CFG_TUSB_DEBUG 0 + #define CFG_TUD_CDC 1 + #define CFG_TUD_HID 0 + #define CFG_TUD_MSC 0 + // Disable unused classes + +Performance Optimization +------------------------ + +- Use DMA for USB transfers if available +- Optimize descriptor sizes +- Use appropriate endpoint buffer sizes +- Consider high-speed USB for high bandwidth applications + +Compliance and Certification +---------------------------- + +- Validate descriptors against USB specifications +- Test with USB-IF compliance tools +- Consider USB-IF certification for commercial products +- Test with multiple host operating systems \ No newline at end of file diff --git a/docs/index.rst b/docs/index.rst index c1c8e4d99..9fbc5bd30 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -1,14 +1,64 @@ -:hide-toc: +TinyUSB Documentation +===================== -.. include:: ../README_processed.rst +TinyUSB is an open-source cross-platform USB Host/Device stack for embedded systems, designed to be memory-safe with no dynamic allocation and thread-safe with all interrupt events deferred to non-ISR task functions. + +For Developers +-------------- + +TinyUSB provides a complete USB stack implementation supporting both device and host modes across a wide range of microcontrollers. The stack is designed for resource-constrained embedded systems with emphasis on code size, memory efficiency, and real-time performance. + +**Key Features:** + +* **Thread-safe design**: All USB interrupts are deferred to task context +* **Memory-safe**: No dynamic allocation, all buffers are statically allocated +* **Portable**: Supports 30+ MCU families from major vendors +* **Comprehensive**: Device classes (CDC, HID, MSC, Audio, etc.) and Host stack +* **RTOS support**: Works with bare metal, FreeRTOS, RT-Thread, and Mynewt + +**Quick Navigation:** + +* New to TinyUSB? Start with :doc:`tutorials/getting_started` +* Need to solve a specific problem? Check :doc:`guides/index` +* Looking for API details? See :doc:`reference/index` +* Want to understand the design? Read :doc:`explanation/architecture` +* Having issues? Check :doc:`faq` and :doc:`troubleshooting` + +Documentation Structure +----------------------- .. toctree:: - :caption: Index - :hidden: + :maxdepth: 2 + :caption: Learning + + tutorials/index + +.. toctree:: + :maxdepth: 2 + :caption: Problem Solving + + guides/index + faq + troubleshooting + +.. toctree:: + :maxdepth: 2 + :caption: Information + + reference/index + +.. toctree:: + :maxdepth: 2 + :caption: Understanding + + explanation/index + +.. toctree:: + :maxdepth: 1 + :caption: Project Info - Info - Reference - Contributing + info/index + contributing/index .. toctree:: :caption: External Links diff --git a/docs/reference/concurrency.rst b/docs/reference/concurrency.rst index 776fa4b6d..99e7e7b70 100644 --- a/docs/reference/concurrency.rst +++ b/docs/reference/concurrency.rst @@ -3,17 +3,17 @@ Concurrency *********** The TinyUSB library is designed to operate on single-core MCUs with multi-threaded applications in mind. Interaction with interrupts is especially important to pay attention to. -It is compatible with optionally using a RTOS. +It is compatible with optionally using an RTOS. General ------- -When writing code, keep in mind that the OS (if using a RTOS) may swap out your code at any time. Also, your code can be preempted by an interrupt at any time. +When writing code, keep in mind that the OS (if using an RTOS) may swap out your code at any time. Also, your code can be preempted by an interrupt at any time. Application Code ---------------- -The USB core does not execute application callbacks while in an interrupt context. Calls to application code are from within the USB core task context. Note that the application core will call class drivers from within their own task. +The USB core does not execute application callbacks while in an interrupt context. Calls to application code are from within the USB core task context. Note that the application core will call class drivers from within its own task. Class Drivers ------------- @@ -38,5 +38,5 @@ Much of the processing of the USB stack is done in an interrupt context, and car In particular: -* Ensure that all memory-mapped registers (including packet memory) are marked as volatile. GCC's optimizer will even combine memory access (like two 16-bit to be a 32-bit) if you don't mark the pointers as volatile. On some architectures, this can use macros like _I , _O , or _IO. -* All defined global variables are marked as ``static``. +* Ensure that all memory-mapped registers (including packet memory) are marked as volatile. GCC's optimizer will even combine memory accesses (like two 16-bit to be a 32-bit) if you don't mark the pointers as volatile. On some architectures, this can use macros like _I , _O , or _IO. +* All defined global variables are marked as ``static``. diff --git a/docs/reference/configuration.rst b/docs/reference/configuration.rst new file mode 100644 index 000000000..8d6dd6190 --- /dev/null +++ b/docs/reference/configuration.rst @@ -0,0 +1,296 @@ +************* +Configuration +************* + +TinyUSB behavior is controlled through compile-time configuration in ``tusb_config.h``. This reference covers all available configuration options. + +Basic Configuration +=================== + +Required Settings +----------------- + +.. code-block:: c + + // Target MCU family - REQUIRED + #define CFG_TUSB_MCU OPT_MCU_STM32F4 + + // OS abstraction layer - REQUIRED + #define CFG_TUSB_OS OPT_OS_NONE + + // Enable device or host stack + #define CFG_TUD_ENABLED 1 // Device stack + #define CFG_TUH_ENABLED 1 // Host stack + +Debug and Logging +----------------- + +.. code-block:: c + + // Debug level (0=off, 1=error, 2=warning, 3=info) + #define CFG_TUSB_DEBUG 2 + + // Memory alignment for buffers (usually 4) + #define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) + +Device Stack Configuration +========================== + +Endpoint Configuration +---------------------- + +.. code-block:: c + + // Control endpoint buffer size + #define CFG_TUD_ENDPOINT0_SIZE 64 + + // Number of endpoints (excluding EP0) + #define CFG_TUD_ENDPOINT_MAX 16 + +Device Classes +-------------- + +**CDC (Communication Device Class)**: + +.. code-block:: c + + #define CFG_TUD_CDC 1 // Number of CDC interfaces + #define CFG_TUD_CDC_EP_BUFSIZE 512 // CDC endpoint buffer size + #define CFG_TUD_CDC_RX_BUFSIZE 256 // CDC RX FIFO size + #define CFG_TUD_CDC_TX_BUFSIZE 256 // CDC TX FIFO size + +**HID (Human Interface Device)**: + +.. code-block:: c + + #define CFG_TUD_HID 1 // Number of HID interfaces + #define CFG_TUD_HID_EP_BUFSIZE 16 // HID endpoint buffer size + +**MSC (Mass Storage Class)**: + +.. code-block:: c + + #define CFG_TUD_MSC 1 // Number of MSC interfaces + #define CFG_TUD_MSC_EP_BUFSIZE 512 // MSC endpoint buffer size + +**Audio Class**: + +.. code-block:: c + + #define CFG_TUD_AUDIO 1 // Number of audio interfaces + #define CFG_TUD_AUDIO_FUNC_1_DESC_LEN 220 + #define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 + #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 + #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 + #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 + #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 2 + +**MIDI**: + +.. code-block:: c + + #define CFG_TUD_MIDI 1 // Number of MIDI interfaces + #define CFG_TUD_MIDI_RX_BUFSIZE 128 // MIDI RX buffer size + #define CFG_TUD_MIDI_TX_BUFSIZE 128 // MIDI TX buffer size + +**DFU (Device Firmware Update)**: + +.. code-block:: c + + #define CFG_TUD_DFU 1 // Enable DFU mode + #define CFG_TUD_DFU_XFER_BUFSIZE 512 // DFU transfer buffer size + +**Vendor Class**: + +.. code-block:: c + + #define CFG_TUD_VENDOR 1 // Number of vendor interfaces + #define CFG_TUD_VENDOR_EPSIZE 64 // Vendor endpoint size + +Host Stack Configuration +======================== + +Port and Hub Configuration +-------------------------- + +.. code-block:: c + + // Number of host root hub ports + #define CFG_TUH_HUB 1 + + // Number of connected devices (including hub) + #define CFG_TUH_DEVICE_MAX 5 + + // Control transfer buffer size + #define CFG_TUH_ENUMERATION_BUFSIZE 512 + +Host Classes +------------ + +**CDC Host**: + +.. code-block:: c + + #define CFG_TUH_CDC 2 // Number of CDC host instances + #define CFG_TUH_CDC_FTDI 1 // FTDI serial support + #define CFG_TUH_CDC_CP210X 1 // CP210x serial support + #define CFG_TUH_CDC_CH34X 1 // CH34x serial support + +**HID Host**: + +.. code-block:: c + + #define CFG_TUH_HID 4 // Number of HID instances + #define CFG_TUH_HID_EPIN_BUFSIZE 64 // HID endpoint buffer size + #define CFG_TUH_HID_EPOUT_BUFSIZE 64 + +**MSC Host**: + +.. code-block:: c + + #define CFG_TUH_MSC 1 // Number of MSC instances + #define CFG_TUH_MSC_MAXLUN 4 // Max LUNs per device + +Advanced Configuration +====================== + +Memory Management +----------------- + +.. code-block:: c + + // Enable stack protection + #define CFG_TUSB_DEBUG_PRINTF printf + + // Custom memory allocation (if needed) + #define CFG_TUSB_MEM_SECTION __attribute__((section(".usb_ram"))) + +RTOS Configuration +------------------ + +**FreeRTOS**: + +.. code-block:: c + + #define CFG_TUSB_OS OPT_OS_FREERTOS + #define CFG_TUD_TASK_QUEUE_SZ 16 + #define CFG_TUH_TASK_QUEUE_SZ 16 + +**RT-Thread**: + +.. code-block:: c + + #define CFG_TUSB_OS OPT_OS_RTTHREAD + +Low Power Configuration +----------------------- + +.. code-block:: c + + // Enable remote wakeup + #define CFG_TUD_USBD_ENABLE_REMOTE_WAKEUP 1 + + // Suspend/resume callbacks + // Implement tud_suspend_cb() and tud_resume_cb() + +MCU-Specific Options +==================== + +The ``CFG_TUSB_MCU`` option selects the target microcontroller family: + +.. code-block:: c + + // STM32 families + #define CFG_TUSB_MCU OPT_MCU_STM32F0 + #define CFG_TUSB_MCU OPT_MCU_STM32F1 + #define CFG_TUSB_MCU OPT_MCU_STM32F4 + #define CFG_TUSB_MCU OPT_MCU_STM32F7 + #define CFG_TUSB_MCU OPT_MCU_STM32H7 + + // NXP families + #define CFG_TUSB_MCU OPT_MCU_LPC18XX + #define CFG_TUSB_MCU OPT_MCU_LPC40XX + #define CFG_TUSB_MCU OPT_MCU_LPC43XX + #define CFG_TUSB_MCU OPT_MCU_KINETIS_KL + #define CFG_TUSB_MCU OPT_MCU_IMXRT + + // Other vendors + #define CFG_TUSB_MCU OPT_MCU_RP2040 + #define CFG_TUSB_MCU OPT_MCU_ESP32S2 + #define CFG_TUSB_MCU OPT_MCU_ESP32S3 + #define CFG_TUSB_MCU OPT_MCU_SAMD21 + #define CFG_TUSB_MCU OPT_MCU_SAMD51 + #define CFG_TUSB_MCU OPT_MCU_NRF5X + +Configuration Examples +====================== + +Minimal Device (CDC only) +-------------------------- + +.. code-block:: c + + #define CFG_TUSB_MCU OPT_MCU_STM32F4 + #define CFG_TUSB_OS OPT_OS_NONE + #define CFG_TUSB_DEBUG 0 + + #define CFG_TUD_ENABLED 1 + #define CFG_TUD_ENDPOINT0_SIZE 64 + + #define CFG_TUD_CDC 1 + #define CFG_TUD_CDC_EP_BUFSIZE 512 + #define CFG_TUD_CDC_RX_BUFSIZE 512 + #define CFG_TUD_CDC_TX_BUFSIZE 512 + + // Disable other classes + #define CFG_TUD_HID 0 + #define CFG_TUD_MSC 0 + #define CFG_TUD_MIDI 0 + #define CFG_TUD_AUDIO 0 + #define CFG_TUD_VENDOR 0 + +Full-Featured Host +------------------ + +.. code-block:: c + + #define CFG_TUSB_MCU OPT_MCU_STM32F4 + #define CFG_TUSB_OS OPT_OS_FREERTOS + #define CFG_TUSB_DEBUG 2 + + #define CFG_TUH_ENABLED 1 + #define CFG_TUH_HUB 1 + #define CFG_TUH_DEVICE_MAX 8 + #define CFG_TUH_ENUMERATION_BUFSIZE 512 + + #define CFG_TUH_CDC 2 + #define CFG_TUH_HID 4 + #define CFG_TUH_MSC 2 + #define CFG_TUH_VENDOR 2 + +Validation +========== + +Use these checks to validate your configuration: + +.. code-block:: c + + // In your main.c, add compile-time checks + #if !defined(CFG_TUSB_MCU) || (CFG_TUSB_MCU == OPT_MCU_NONE) + #error "CFG_TUSB_MCU must be defined" + #endif + + #if CFG_TUD_ENABLED && !defined(CFG_TUD_ENDPOINT0_SIZE) + #error "CFG_TUD_ENDPOINT0_SIZE must be defined for device stack" + #endif + +Common Configuration Issues +=========================== + +1. **Endpoint buffer size too small**: Causes transfer failures +2. **Missing CFG_TUSB_MCU**: Build will fail +3. **Incorrect OS setting**: RTOS functions won't work properly +4. **Insufficient endpoint count**: Device enumeration will fail +5. **Buffer size mismatches**: Data corruption or transfer failures + +For configuration examples specific to your board, check ``examples/device/*/tusb_config.h``. \ No newline at end of file diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index 9ca9b0b54..e04cc2c2f 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -2,7 +2,7 @@ Dependencies ************ -MCU low-level peripheral driver and external libraries for building TinyUSB examples +MCU low-level peripheral drivers and external libraries for building TinyUSB examples ======================================== ================================================================ ======================================== ====================================================================================================================================================================================================================================================================================================================================================================== Local Path Repo Commit Required by diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst deleted file mode 100644 index b891d911b..000000000 --- a/docs/reference/getting_started.rst +++ /dev/null @@ -1,269 +0,0 @@ -*************** -Getting Started -*************** - -Add TinyUSB to your project ---------------------------- - -To incorporate tinyusb to your project - -* Copy or ``git submodule`` this repo into your project in a subfolder. Let's say it is ``your_project/tinyusb`` -* Add all the ``.c`` in the ``tinyusb/src`` folder to your project -* Add ``your_project/tinyusb/src`` to your include path. Also make sure your current include path also contains the configuration file ``tusb_config.h``. -* Make sure all required macros are all defined properly in ``tusb_config.h`` (configure file in demo application is sufficient, but you need to add a few more such as ``CFG_TUSB_MCU``, ``CFG_TUSB_OS`` since they are passed by make/cmake to maintain a unique configure for all boards). -* If you use the device stack, make sure you have created/modified usb descriptors for your own need. Ultimately you need to implement all **tud descriptor** callbacks for the stack to work. -* Add ``tusb_init(rhport, role)`` call to your reset initialization code. -* Call ``tusb_int_handler(rhport, in_isr)`` in your USB IRQ Handler -* Implement all enabled classes's callbacks. -* If you don't use any RTOSes at all, you need to continuously and/or periodically call ``tud_task()``/``tuh_task()`` function. All of the callbacks and functionality are handled and invoked within the call of that task runner. - -.. code-block:: c - - int main(void) { - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; - tusb_init(0, &dev_init); // initialize device stack on roothub port 0 - - tusb_rhport_init_t host_init = { - .role = TUSB_ROLE_HOST, - .speed = TUSB_SPEED_AUTO - }; - tusb_init(1, &host_init); // initialize host stack on roothub port 1 - - while(1) { // the mainloop - your_application_code(); - tud_task(); // device task - tuh_task(); // host task - } - } - - void USB0_IRQHandler(void) { - tusb_int_handler(0, true); - } - - void USB1_IRQHandler(void) { - tusb_int_handler(1, true); - } - -Examples --------- - -For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API should be used. Most examples will work on most of :doc:`the supported boards `. Firstly we need to ``git clone`` if not already - -.. code-block:: bash - - $ git clone https://github.com/hathach/tinyusb tinyusb - $ cd tinyusb - -Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for tinyusb, you should download/install it first according to its manufacturer guide. - -Dependencies -^^^^^^^^^^^^ - -The hardware code is located in ``hw/bsp`` folder, and is organized by family/boards. e.g raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. Before building, we firstly need to download dependencies such as: MCU low-level peripheral driver and external libraries e.g FreeRTOS (required by some examples). We can do that by either ways: - -1. Run ``tools/get_deps.py {FAMILY}`` script to download all dependencies for a family as follow. Note: For TinyUSB developer to download all dependencies, use FAMILY=all. - -.. code-block:: bash - - $ python tools/get_deps.py rp2040 - -2. Or run the ``get-deps`` target in one of the example folder as follow. - -.. code-block:: bash - - $ cd examples/device/cdc_msc - $ make BOARD=feather_nrf52840_express get-deps - -You only need to do this once per family. Check out :doc:`complete list of dependencies and their designated path here ` - -Build Examples -^^^^^^^^^^^^^^ - -Examples support make and cmake build system for most MCUs, however some MCU families such as espressif or rp2040 only support cmake. First change directory to an example folder. - -.. code-block:: bash - - $ cd examples/device/cdc_msc - -Then compile with make or cmake - -.. code-block:: bash - - $ # make - $ make BOARD=feather_nrf52840_express all - - $ # cmake - $ mkdir build && cd build - $ cmake -DBOARD=raspberry_pi_pico .. - $ make - -To list all available targets with cmake - -.. code-block:: bash - - $ cmake --build . --target help - -Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``99-tinyusb.rules`` and reload your udev is good to go - -.. code-block:: bash - - $ cp examples/device/99-tinyusb.rules /etc/udev/rules.d/ - $ sudo udevadm control --reload-rules && sudo udevadm trigger - -RootHub Port Selection -~~~~~~~~~~~~~~~~~~~~~~ - -If a board has several ports, one port is chosen by default in the individual board.mk file. Use option ``RHPORT_DEVICE=x`` or ``RHPORT_HOST=x`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: - -.. code-block:: bash - - $ make BOARD=stm32f746disco RHPORT_DEVICE=1 all - - $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE=1 .. - -Port Speed -~~~~~~~~~~ - -A MCU can support multiple operational speed. By default, the example build system will use the fastest supported on the board. Use option ``RHPORT_DEVICE_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` or ``RHPORT_HOST_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` e.g To force F723 operate at full instead of default high speed - -.. code-block:: bash - - $ make BOARD=stm32f746disco RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED all - - $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED .. - -Size Analysis -~~~~~~~~~~~~~ - -First install `linkermap tool `_ then ``linkermap`` target can be used to analyze code size. You may want to compile with ``NO_LTO=1`` since ``-flto`` merges code across ``.o`` files and make it difficult to analyze. - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express NO_LTO=1 all linkermap - -Debug -^^^^^ - -To compile for debugging add ``DEBUG=1``\ , for example - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express DEBUG=1 all - - $ cmake -DBOARD=feather_nrf52840_express -DCMAKE_BUILD_TYPE=Debug .. - -Log -~~~ - -Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional ``LOG=``. ``LOG=1`` will only print out error message, ``LOG=2`` print more information with on-going events. ``LOG=3`` or higher is not used yet. - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express LOG=2 all - - $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 .. - -Logger -~~~~~~ - -By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: - - -* `LOGGER=rtt`: use `Segger RTT protocol `_ - - * Cons: requires jlink as the debugger. - * Pros: work with most if not all MCUs - * Software viewer is JLink RTT Viewer/Client/Logger which is bundled with JLink driver package. - -* ``LOGGER=swo`` : Use dedicated SWO pin of ARM Cortex SWD debug header. - - * Cons: only work with ARM Cortex MCUs minus M0 - * Pros: should be compatible with more debugger that support SWO. - * Software viewer should be provided along with your debugger driver. - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=rtt all - $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=swo all - - $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=rtt .. - $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=swo .. - -Flash -^^^^^ - -``flash`` target will use the default on-board debugger (jlink/cmsisdap/stlink/dfu) to flash the binary, please install those support software in advance. Some board use bootloader/DFU via serial which is required to pass to make command - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express flash - $ make SERIAL=/dev/ttyACM0 BOARD=feather_nrf52840_express flash - -Since jlink/openocd can be used with most of the boards, there is also ``flash-jlink/openocd`` (make) and ``EXAMPLE-jlink/openocd`` target for your convenience. Note for stm32 board with stlink, you can use ``flash-stlink`` target as well. - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express flash-jlink - $ make BOARD=feather_nrf52840_express flash-openocd - - $ cmake --build . --target cdc_msc-jlink - $ cmake --build . --target cdc_msc-openocd - -Some board use uf2 bootloader for drag & drop in to mass storage device, uf2 can be generated with ``uf2`` target - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express all uf2 - - $ cmake --build . --target cdc_msc-uf2 - -IAR Support -^^^^^^^^^^^ - -Use project connection -~~~~~~~~~~~~~~~~~~~~~~ - -IAR Project Connection files are provided to import TinyUSB stack into your project. - -* A buildable project of your MCU need to be created in advance. - - * Take example of STM32F0: - - - You need ``stm32l0xx.h``, ``startup_stm32f0xx.s``, ``system_stm32f0xx.c``. - - - ``STM32L0xx_HAL_Driver`` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. - -* Open ``Tools -> Configure Custom Argument Variables`` (Switch to ``Global`` tab if you want to do it for all your projects) - Click ``New Group ...``, name it to ``TUSB``, Click ``Add Variable ...``, name it to ``TUSB_DIR``, change it's value to the path of your TinyUSB stack, - for example ``C:\\tinyusb`` - -**Import stack only** - -Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\tools\\iar_template.ipcf``. - -**Run examples** - -1. Run ``iar_gen.py`` to generate .ipcf files of examples: - - .. code-block:: - - > cd C:\tinyusb\tools - > python iar_gen.py - -2. Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\examples\\(.ipcf of example)``. - For example ``C:\\tinyusb\\examples\\device\\cdc_msc\\iar_cdc_msc.ipcf`` - -Native CMake support -~~~~~~~~~~~~~~~~~~~~ - -With 9.50.1 release, IAR added experimental native CMake support (strangely not mentioned in public release note). Now it's possible to import CMakeLists.txt then build and debug as a normal project. - -Following these steps: - -1. Add IAR compiler binary path to system ``PATH`` environment variable, such as ``C:\Program Files\IAR Systems\Embedded Workbench 9.2\arm\bin``. -2. Create new project in IAR, in Tool chain dropdown menu, choose CMake for Arm then Import ``CMakeLists.txt`` from chosen example directory. -3. Set up board option in ``Option - CMake/CMSIS-TOOLBOX - CMake``, for example ``-DBOARD=stm32f439nucleo -DTOOLCHAIN=iar``, **Uncheck 'Override tools in env'**. -4. (For debug only) Choose correct CPU model in ``Option - General Options - Target``, to profit register and memory view. diff --git a/docs/reference/glossary.rst b/docs/reference/glossary.rst new file mode 100644 index 000000000..e6e92738f --- /dev/null +++ b/docs/reference/glossary.rst @@ -0,0 +1,89 @@ +******** +Glossary +******** + +.. glossary:: + + Bulk Transfer + USB transfer type used for large amounts of data that doesn't require guaranteed timing. Used by mass storage devices and CDC class. + + CDC + Communications Device Class. USB class for devices that communicate serial data, creating virtual serial ports. + + Control Transfer + USB transfer type used for device configuration and control. All USB devices must support control transfers on endpoint 0. + + DCD + Device Controller Driver. The hardware abstraction layer for USB device controllers in TinyUSB. + + Descriptor + Data structures that describe USB device capabilities, configuration, and interfaces to the host. + + Device Class + USB specification defining how devices of a particular type (e.g., storage, audio, HID) communicate with hosts. + + DFU + Device Firmware Update. USB class that allows firmware updates over USB. + + Endpoint + Communication channel between host and device. Each endpoint has a direction (IN/OUT) and transfer type. + + Enumeration + Process where USB host discovers and configures a newly connected device. + + HCD + Host Controller Driver. The hardware abstraction layer for USB host controllers in TinyUSB. + + HID + Human Interface Device. USB class for input devices like keyboards, mice, and game controllers. + + High Speed + USB 2.0 speed mode operating at 480 Mbps. + + Full Speed + USB speed mode operating at 12 Mbps, supported by USB 1.1 and 2.0. + + Low Speed + USB speed mode operating at 1.5 Mbps, typically used by simple input devices. + + Interrupt Transfer + USB transfer type for small, time-sensitive data with guaranteed maximum latency. + + Isochronous Transfer + USB transfer type for time-critical data like audio/video with guaranteed bandwidth but no error correction. + + MSC + Mass Storage Class. USB class for storage devices like USB drives. + + OSAL + Operating System Abstraction Layer. TinyUSB component that abstracts RTOS differences. + + OTG + On-The-Go. USB specification allowing devices to act as both host and device. + + Pipe + Host-side communication channel to a device endpoint. + + Root Hub + The USB hub built into the host controller, where devices connect directly. + + Stall + USB protocol mechanism where an endpoint responds with a STALL handshake to indicate an error condition or unsupported request. Used for error handling, not flow control. + + Super Speed + USB 3.0 speed mode operating at 5 Gbps. Not supported by TinyUSB. + + UAC + USB Audio Class. USB class for audio devices. + + UVC + USB Video Class. USB class for video devices like cameras. + + VID + Vendor Identifier. 16-bit number assigned by USB-IF to identify device manufacturers. + + PID + Product Identifier. 16-bit number assigned by vendor to identify specific products. + + USB-IF + USB Implementers Forum. Organization that maintains USB specifications and assigns VIDs. \ No newline at end of file diff --git a/docs/reference/index.rst b/docs/reference/index.rst index 8ac3cf924..cb35dd1b9 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -1,10 +1,16 @@ -Index -===== +********* +Reference +********* + +Complete reference documentation for TinyUSB APIs, configuration, and supported hardware. .. toctree:: :maxdepth: 2 - getting_started + api/index + configuration + usb_classes boards dependencies concurrency + glossary diff --git a/docs/reference/usb_classes.rst b/docs/reference/usb_classes.rst new file mode 100644 index 000000000..00a251ffb --- /dev/null +++ b/docs/reference/usb_classes.rst @@ -0,0 +1,290 @@ +*********** +USB Classes +*********** + +TinyUSB supports multiple USB device and host classes. This reference describes the features, capabilities, and requirements for each class. + +Device Classes +============== + +CDC (Communication Device Class) +-------------------------------- + +Implements USB CDC specification for serial communication. + +**Supported Features:** +- CDC-ACM (Abstract Control Model) for virtual serial ports +- Data terminal ready (DTR) and request to send (RTS) control lines +- Line coding configuration (baud rate, parity, stop bits) +- Break signal support + +**Configuration:** +- ``CFG_TUD_CDC``: Number of CDC interfaces (1-4) +- ``CFG_TUD_CDC_EP_BUFSIZE``: Endpoint buffer size (typically 512) +- ``CFG_TUD_CDC_RX_BUFSIZE``: Receive FIFO size +- ``CFG_TUD_CDC_TX_BUFSIZE``: Transmit FIFO size + +**Key Functions:** +- ``tud_cdc_available()``: Check bytes available to read +- ``tud_cdc_read()``: Read data from host +- ``tud_cdc_write()``: Write data to host +- ``tud_cdc_write_flush()``: Flush transmit buffer + +**Callbacks:** +- ``tud_cdc_line_coding_cb()``: Line coding changed +- ``tud_cdc_line_state_cb()``: DTR/RTS state changed + +HID (Human Interface Device) +---------------------------- + +Implements USB HID specification for input devices. + +**Supported Features:** +- Boot protocol (keyboard/mouse) +- Report protocol with custom descriptors +- Input, output, and feature reports +- Multiple HID interfaces + +**Configuration:** +- ``CFG_TUD_HID``: Number of HID interfaces +- ``CFG_TUD_HID_EP_BUFSIZE``: Endpoint buffer size + +**Key Functions:** +- ``tud_hid_ready()``: Check if ready to send report +- ``tud_hid_report()``: Send HID report +- ``tud_hid_keyboard_report()``: Send keyboard report +- ``tud_hid_mouse_report()``: Send mouse report + +**Callbacks:** +- ``tud_hid_descriptor_report_cb()``: Provide report descriptor +- ``tud_hid_get_report_cb()``: Handle get report request +- ``tud_hid_set_report_cb()``: Handle set report request + +MSC (Mass Storage Class) +------------------------ + +Implements USB mass storage for file systems. + +**Supported Features:** +- SCSI transparent command set +- Multiple logical units (LUNs) +- Read/write operations +- Inquiry and capacity commands + +**Configuration:** +- ``CFG_TUD_MSC``: Number of MSC interfaces +- ``CFG_TUD_MSC_EP_BUFSIZE``: Endpoint buffer size + +**Key Functions:** +- Storage operations handled via callbacks + +**Required Callbacks:** +- ``tud_msc_inquiry_cb()``: Device inquiry information +- ``tud_msc_test_unit_ready_cb()``: Test if LUN is ready +- ``tud_msc_capacity_cb()``: Get LUN capacity +- ``tud_msc_start_stop_cb()``: Start/stop LUN +- ``tud_msc_read10_cb()``: Read data from LUN +- ``tud_msc_write10_cb()``: Write data to LUN + +Audio Class +----------- + +Implements USB Audio Class 2.0 specification. + +**Supported Features:** +- Audio streaming (input/output) +- Multiple sampling rates +- Volume and mute controls +- Feedback endpoints for asynchronous mode + +**Configuration:** +- ``CFG_TUD_AUDIO``: Number of audio functions +- Multiple configuration options for channels, sample rates, bit depth + +**Key Functions:** +- ``tud_audio_read()``: Read audio data +- ``tud_audio_write()``: Write audio data +- ``tud_audio_clear_ep_out_ff()``: Clear output FIFO + +MIDI +---- + +Implements USB MIDI specification. + +**Supported Features:** +- MIDI 1.0 message format +- Multiple virtual MIDI cables +- Standard MIDI messages + +**Configuration:** +- ``CFG_TUD_MIDI``: Number of MIDI interfaces +- ``CFG_TUD_MIDI_RX_BUFSIZE``: Receive buffer size +- ``CFG_TUD_MIDI_TX_BUFSIZE``: Transmit buffer size + +**Key Functions:** +- ``tud_midi_available()``: Check available MIDI messages +- ``tud_midi_read()``: Read MIDI packet +- ``tud_midi_write()``: Send MIDI packet + +DFU (Device Firmware Update) +---------------------------- + +Implements USB DFU specification for firmware updates. + +**Supported Modes:** +- DFU Mode: Device enters DFU for firmware update +- DFU Runtime: Request transition to DFU mode + +**Configuration:** +- ``CFG_TUD_DFU``: Enable DFU mode +- ``CFG_TUD_DFU_RUNTIME``: Enable DFU runtime + +**Key Functions:** +- Firmware update operations handled via callbacks + +**Required Callbacks:** +- ``tud_dfu_download_cb()``: Receive firmware data +- ``tud_dfu_manifest_cb()``: Complete firmware update + +Vendor Class +------------ + +Custom vendor-specific USB class implementation. + +**Features:** +- Configurable endpoints +- Custom protocol implementation +- WebUSB support +- Microsoft OS descriptors + +**Configuration:** +- ``CFG_TUD_VENDOR``: Number of vendor interfaces +- ``CFG_TUD_VENDOR_EPSIZE``: Endpoint size + +**Key Functions:** +- ``tud_vendor_available()``: Check available data +- ``tud_vendor_read()``: Read vendor data +- ``tud_vendor_write()``: Write vendor data + +Host Classes +============ + +CDC Host +-------- + +Connect to CDC devices (virtual serial ports). + +**Supported Devices:** +- CDC-ACM devices +- FTDI USB-to-serial converters +- CP210x USB-to-serial converters +- CH34x USB-to-serial converters + +**Configuration:** +- ``CFG_TUH_CDC``: Number of CDC host instances +- ``CFG_TUH_CDC_FTDI``: Enable FTDI support +- ``CFG_TUH_CDC_CP210X``: Enable CP210x support + +**Key Functions:** +- ``tuh_cdc_available()``: Check available data +- ``tuh_cdc_read()``: Read from CDC device +- ``tuh_cdc_write()``: Write to CDC device +- ``tuh_cdc_set_baudrate()``: Configure serial settings + +HID Host +-------- + +Connect to HID devices (keyboards, mice, etc.). + +**Supported Devices:** +- Boot keyboards and mice +- Generic HID devices with report descriptors +- Composite HID devices + +**Configuration:** +- ``CFG_TUH_HID``: Number of HID host instances +- ``CFG_TUH_HID_EPIN_BUFSIZE``: Input endpoint buffer size + +**Key Functions:** +- ``tuh_hid_receive_report()``: Start receiving reports +- ``tuh_hid_send_report()``: Send report to device +- ``tuh_hid_parse_report_descriptor()``: Parse HID descriptors + +MSC Host +-------- + +Connect to mass storage devices (USB drives). + +**Supported Features:** +- SCSI transparent command set +- FAT file system support (with FatFS integration) +- Multiple LUNs per device + +**Configuration:** +- ``CFG_TUH_MSC``: Number of MSC host instances +- ``CFG_TUH_MSC_MAXLUN``: Maximum LUNs per device + +**Key Functions:** +- ``tuh_msc_ready()``: Check if device is ready +- ``tuh_msc_read10()``: Read sectors from device +- ``tuh_msc_write10()``: Write sectors to device + +Hub +--- + +Support for USB hubs to connect multiple devices. + +**Features:** +- Multi-level hub support +- Port power management +- Device connect/disconnect detection + +**Configuration:** +- ``CFG_TUH_HUB``: Number of hub instances +- ``CFG_TUH_DEVICE_MAX``: Total connected devices + +Class Implementation Guidelines +=============================== + +Descriptor Requirements +----------------------- + +Each USB class requires specific descriptors: + +1. **Interface Descriptor**: Defines the class type +2. **Endpoint Descriptors**: Define communication endpoints +3. **Class-Specific Descriptors**: Additional class requirements +4. **String Descriptors**: Human-readable device information + +Callback Implementation +----------------------- + +Most classes require callback functions: + +- **Mandatory callbacks**: Must be implemented for class to function +- **Optional callbacks**: Provide additional functionality +- **Event callbacks**: Called when specific events occur + +Performance Considerations +-------------------------- + +- **Buffer Sizes**: Match endpoint buffer sizes to expected data rates +- **Transfer Types**: Use appropriate USB transfer types (bulk, interrupt, isochronous) +- **CPU Usage**: Minimize processing in interrupt context +- **Memory Usage**: Static allocation only, no dynamic memory + +Testing and Validation +---------------------- + +- **USB-IF Compliance**: Ensure descriptors meet USB standards +- **Host Compatibility**: Test with multiple operating systems +- **Performance Testing**: Verify transfer rates and latency +- **Error Handling**: Test disconnect/reconnect scenarios + +Class-Specific Resources +======================== + +- **USB-IF Specifications**: Official USB class specifications +- **Example Code**: Reference implementations in ``examples/`` directory +- **Test Applications**: Host-side test applications for validation +- **Debugging Tools**: USB protocol analyzers and debugging utilities \ No newline at end of file diff --git a/docs/troubleshooting.rst b/docs/troubleshooting.rst new file mode 100644 index 000000000..1f0f388df --- /dev/null +++ b/docs/troubleshooting.rst @@ -0,0 +1,318 @@ +*************** +Troubleshooting +*************** + +This guide helps you diagnose and fix common issues when developing with TinyUSB. + +Build Issues +============ + +Toolchain Problems +------------------ + +**"arm-none-eabi-gcc: command not found"** + +The ARM GCC toolchain is not installed or not in PATH. + +*Solution*: +.. code-block:: bash + + # Ubuntu/Debian + sudo apt-get update && sudo apt-get install gcc-arm-none-eabi + + # macOS with Homebrew + brew install --cask gcc-arm-embedded + + # Windows: Download from ARM website and add to PATH + +**"make: command not found" or CMake errors** + +Build tools are missing. + +*Solution*: +.. code-block:: bash + + # Ubuntu/Debian + sudo apt-get install build-essential cmake + + # macOS + xcode-select --install + brew install cmake + +Dependency Issues +----------------- + +**"No rule to make target" or missing header files** + +Dependencies for your MCU family are not downloaded. + +*Solution*: +.. code-block:: bash + + # Download dependencies for specific family + python tools/get_deps.py stm32f4 # Replace with your family + + # Or from example directory + cd examples/device/cdc_msc + make BOARD=your_board get-deps + +**Board Not Found** + +Invalid board name in build command. + +*Diagnosis*: +.. code-block:: bash + + # List available boards for a family + ls hw/bsp/stm32f4/boards/ + + # List all supported boards + python tools/build.py -l + +*Solution*: Use exact board name from the listing. + +Runtime Issues +============== + +Device Mode Problems +-------------------- + +**Device not recognized by host** + +The most common issue - host doesn't see your USB device. + +*Diagnosis steps*: +1. Check USB cable (must support data, not just power) +2. Enable logging: build with ``LOG=2`` +3. Use different USB ports/hosts +4. Check device manager (Windows) or ``dmesg`` (Linux) + +*Common causes and solutions*: + +- **Invalid descriptors**: Review ``usb_descriptors.c`` carefully +- **``tud_task()`` not called**: Ensure regular calls in main loop (< 1ms interval) +- **Wrong USB configuration**: Check ``tusb_config.h`` settings +- **Hardware issues**: Verify USB pins, crystal/clock configuration + +**Enumeration starts but fails** + +Device is detected but configuration fails. + +*Diagnosis*: +.. code-block:: bash + + # Build with logging enabled + make BOARD=your_board LOG=2 all + +*Look for*: +- Setup request handling errors +- Endpoint configuration problems +- String descriptor issues + +*Solutions*: +- Implement all required descriptors +- Check endpoint sizes match descriptors +- Ensure control endpoint (EP0) handling is correct + +**Data transfer issues** + +Device enumerates but data doesn't transfer correctly. + +*Common causes*: +- Buffer overruns in class callbacks +- Incorrect endpoint usage (IN vs OUT) +- Flow control issues in CDC class + +*Solutions*: +- Check buffer sizes in callbacks +- Verify endpoint directions in descriptors +- Implement proper flow control + +Host Mode Problems +------------------ + +**No devices detected** + +Host application doesn't see connected devices. + +*Hardware checks*: +- Power supply adequate for host mode +- USB-A connector for host (not micro-USB) +- Board supports host mode on selected port + +*Software checks*: +- ``tuh_task()`` called regularly +- Host stack enabled in ``tusb_config.h`` +- Correct root hub port configuration + +**Device enumeration fails** + +Devices connect but enumeration fails. + +*Diagnosis*: +.. code-block:: bash + + # Enable host logging + make BOARD=your_board LOG=2 RHPORT_HOST=1 all + +*Common issues*: +- Power supply insufficient during enumeration +- Timing issues with slow devices +- USB hub compatibility problems + +**Class driver issues** + +Device enumerates but class-specific communication fails. + +*Troubleshooting*: +- Check device descriptors match expected class +- Verify interface/endpoint assignments +- Some devices need device-specific handling + +Performance Issues +================== + +Slow Transfer Speeds +-------------------- + +**Symptoms**: Lower than expected USB transfer rates + +*Causes and solutions*: +- **Task scheduling**: Call ``tud_task()``/``tuh_task()`` more frequently +- **Endpoint buffer sizes**: Increase buffer sizes for bulk transfers +- **DMA usage**: Enable DMA for USB transfers if supported +- **USB speed**: Use High Speed (480 Mbps) instead of Full Speed (12 Mbps) + +High CPU Usage +-------------- + +**Symptoms**: MCU spending too much time in USB handling + +*Solutions*: +- Use efficient logging (RTT/SWO instead of UART) +- Reduce log level in production builds +- Optimize descriptor parsing +- Use DMA for data transfers + +Memory Issues +============= + +Stack Overflow +-------------- + +**Symptoms**: Hard faults, random crashes, especially during enumeration + +*Diagnosis*: +- Build with ``DEBUG=1`` and use debugger +- Check stack pointer before/after USB operations +- Monitor stack usage with RTOS tools + +*Solutions*: +- Increase stack size in linker script +- Reduce local variable usage in callbacks +- Use static buffers instead of large stack arrays + +Heap Issues +----------- + +**Note**: TinyUSB doesn't use dynamic allocation, but your application might. + +*Check*: +- Application code using malloc/free +- RTOS heap usage +- Third-party library allocations + +Hardware-Specific Issues +======================== + +STM32 Issues +------------ + +**Clock configuration problems**: +- USB requires precise 48MHz clock +- HSE crystal must be configured correctly +- PLL settings affect USB timing + +**Pin configuration**: +- USB pins need specific alternate function settings +- VBUS sensing configuration +- ID pin for OTG applications + +RP2040 Issues +------------- + +**PIO-USB for host mode**: +- Requires specific pin assignments +- CPU overclocking may be needed for reliable operation +- Timing-sensitive - avoid long interrupt disable periods + +**Flash/RAM constraints**: +- Large USB applications may exceed RP2040 limits +- Use code optimization and remove unused features + +ESP32 Issues +------------ + +**USB peripheral differences**: +- ESP32-S2/S3 have different USB capabilities +- Some variants only support device mode +- DMA configuration varies between models + +Advanced Debugging +================== + +Using USB Analyzers +------------------- + +For complex issues, hardware USB analyzers provide detailed protocol traces: + +- **Wireshark** with USBPcap (Windows) or usbmon (Linux) +- **Hardware analyzers**: Total Phase Beagle, LeCroy USB analyzers +- **Logic analyzers**: For timing analysis of USB signals + +Debugging with GDB +------------------ + +.. code-block:: bash + + # Build with debug info + make BOARD=your_board DEBUG=1 all + + # Use with debugger + arm-none-eabi-gdb build/your_app.elf + +*Useful breakpoints*: +- ``dcd_int_handler()`` - USB interrupt entry +- ``tud_task()`` - Main device task +- Class-specific callbacks + +Custom Logging +-------------- + +For production debugging, implement custom logging: + +.. code-block:: c + + // In tusb_config.h + #define CFG_TUSB_DEBUG_PRINTF my_printf + + // Your implementation + void my_printf(const char* format, ...) { + // Send to RTT, SWO, or custom interface + } + +Getting Help +============ + +When reporting issues: + +1. **Minimal reproducible example**: Simplify to bare minimum +2. **Build information**: Board, toolchain version, build flags +3. **Logs**: Include output with ``LOG=2`` enabled +4. **Hardware details**: Board revision, USB connections, power supply +5. **Host environment**: OS version, USB port type + +**Resources**: +- GitHub Discussions: https://github.com/hathach/tinyusb/discussions +- Issue Tracker: https://github.com/hathach/tinyusb/issues +- Documentation: https://docs.tinyusb.org \ No newline at end of file diff --git a/docs/tutorials/first_device.rst b/docs/tutorials/first_device.rst new file mode 100644 index 000000000..9fac2df49 --- /dev/null +++ b/docs/tutorials/first_device.rst @@ -0,0 +1,147 @@ +********************* +Your First USB Device +********************* + +This tutorial walks you through creating a simple USB CDC (serial) device using TinyUSB. By the end, you'll have a working USB device that appears as a serial port on your computer. + +Prerequisites +============= + +* Completed :doc:`getting_started` tutorial +* Development board with USB device capability (e.g., STM32F4 Discovery, Raspberry Pi Pico) +* Basic understanding of C programming + +Understanding USB Device Basics +=============================== + +A USB device needs three key components: + +1. **USB Descriptors**: Tell the host what kind of device this is +2. **Class Implementation**: Handle USB class-specific requests (CDC, HID, etc.) +3. **Application Logic**: Your main application code + +Step 1: Choose Your Starting Point +================================== + +We'll start with the ``cdc_msc`` example as it's the most commonly used and well-tested. + +.. code-block:: bash + + cd examples/device/cdc_msc + +This example implements both CDC (virtual serial port) and MSC (mass storage) classes. + +Step 2: Understand the Code Structure +===================================== + +Key files in the example: + +* ``main.c`` - Main application loop and board initialization +* ``usb_descriptors.c`` - USB device descriptors +* ``tusb_config.h`` - TinyUSB stack configuration + +**Main Loop Pattern**: + +.. code-block:: c + + int main(void) { + board_init(); + tusb_init(); + + while (1) { + tud_task(); // TinyUSB device task + cdc_task(); // Application-specific CDC handling + } + } + +**Device Task**: ``tud_task()`` must be called regularly to handle USB events and maintain the connection. + +Step 3: Build and Test +====================== + +.. code-block:: bash + + # Fetch dependencies for your board family + python ../../../tools/get_deps.py stm32f4 # Replace with your family + + # Build for your board + make BOARD=stm32f407disco all + + # Flash to device + make BOARD=stm32f407disco flash + +**Expected Result**: After flashing, connect the USB port to your computer. You should see: + +* A new serial port device (e.g., ``/dev/ttyACM0`` on Linux, ``COMx`` on Windows) +* A small mass storage device + +Step 4: Customize for Your Needs +================================= + +**Simplify to CDC-only**: + +1. In ``tusb_config.h``, disable MSC: + +.. code-block:: c + + #define CFG_TUD_MSC 0 // Disable Mass Storage + +2. Remove MSC-related code from ``main.c`` and ``usb_descriptors.c`` + +**Modify Device Information**: + +In ``usb_descriptors.c``: + +.. code-block:: c + + tusb_desc_device_t const desc_device = { + .idVendor = 0xCafe, // Your vendor ID + .idProduct = 0x4000, // Your product ID + .bcdDevice = 0x0100, // Device version + // ... other fields + }; + +**Add Application Logic**: + +In the CDC task function, add your serial communication logic: + +.. code-block:: c + + void cdc_task(void) { + if (tud_cdc_available()) { + uint8_t buf[64]; + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + + // Echo back what was received + tud_cdc_write(buf, count); + tud_cdc_write_flush(); + } + } + +Common Issues and Solutions +=========================== + +**Device Not Recognized**: + +* Check USB cable (must support data, not just power) +* Verify descriptors are valid using ``LOG=2`` build option +* Ensure ``tud_task()`` is called regularly in main loop + +**Build Errors**: + +* Missing dependencies: Run ``python tools/get_deps.py FAMILY`` +* Wrong board name: Check ``hw/bsp/FAMILY/boards/`` for valid names +* Compiler issues: Install ``gcc-arm-none-eabi`` + +**Runtime Issues**: + +* Hard faults: Check stack size in linker script +* USB not working: Verify clock configuration and USB pin setup +* Serial data corruption: Ensure proper flow control in CDC implementation + +Next Steps +========== + +* Learn about other device classes in :doc:`../reference/usb_classes` +* Understand advanced integration in :doc:`../guides/integration` +* Explore TinyUSB architecture in :doc:`../explanation/architecture` \ No newline at end of file diff --git a/docs/tutorials/first_host.rst b/docs/tutorials/first_host.rst new file mode 100644 index 000000000..5b406ad34 --- /dev/null +++ b/docs/tutorials/first_host.rst @@ -0,0 +1,160 @@ +****************** +Your First USB Host +****************** + +This tutorial guides you through creating a simple USB host application that can connect to and communicate with USB devices. + +Prerequisites +============= + +* Completed :doc:`getting_started` and :doc:`first_device` tutorials +* Development board with USB host capability (e.g., STM32F4 Discovery with USB-A connector) +* USB device to test with (USB drive, mouse, keyboard, or CDC device) + +Understanding USB Host Basics +============================= + +A USB host application needs: + +1. **Device Enumeration**: Detect and configure connected devices +2. **Class Drivers**: Handle communication with specific device types +3. **Application Logic**: Process data from/to the connected devices + +Step 1: Start with an Example +============================= + +Use the ``cdc_msc_hid`` host example: + +.. code-block:: bash + + cd examples/host/cdc_msc_hid + +This example can communicate with CDC (serial), MSC (storage), and HID (keyboard/mouse) devices. + +Step 2: Understand the Code Structure +===================================== + +Key components: + +* ``main.c`` - Main loop and device event handling +* Host callbacks - Functions called when devices connect/disconnect +* Class-specific handlers - Process data from different device types + +**Main Loop Pattern**: + +.. code-block:: c + + int main(void) { + board_init(); + tusb_init(); + + while (1) { + tuh_task(); // TinyUSB host task + // Handle connected devices + } + } + +**Connection Events**: TinyUSB calls your callbacks when devices connect: + +.. code-block:: c + + void tuh_mount_cb(uint8_t dev_addr) { + printf("Device connected, address = %d\\n", dev_addr); + } + + void tuh_umount_cb(uint8_t dev_addr) { + printf("Device disconnected, address = %d\\n", dev_addr); + } + +Step 3: Build and Test +====================== + +.. code-block:: bash + + # Fetch dependencies + python ../../../tools/get_deps.py stm32f4 + + # Build + make BOARD=stm32f407disco all + + # Flash + make BOARD=stm32f407disco flash + +**Testing**: Connect different USB devices and observe the output via serial console. + +Step 4: Handle Specific Device Types +==================================== + +**Mass Storage (USB Drive)**: + +.. code-block:: c + + void tuh_msc_mount_cb(uint8_t dev_addr) { + printf("USB Drive mounted\\n"); + // Read/write files + } + +**HID Devices (Keyboard/Mouse)**: + +.. code-block:: c + + void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, + uint8_t const* desc_report, uint16_t desc_len) { + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + if (itf_protocol == HID_ITF_PROTOCOL_KEYBOARD) { + printf("Keyboard connected\\n"); + } + } + +**CDC Devices (Serial)**: + +.. code-block:: c + + void tuh_cdc_mount_cb(uint8_t idx) { + printf("CDC device mounted\\n"); + // Configure serial settings + tuh_cdc_set_baudrate(idx, 115200, NULL, 0); + } + +Common Issues and Solutions +=========================== + +**No Device Detection**: + +* Check power supply - host mode requires more power than device mode +* Verify USB connector wiring and type (USB-A for host vs USB micro/C for device) +* Enable logging with ``LOG=2`` to see enumeration process + +**Enumeration Failures**: + +* Some devices need more time - increase timeouts +* Check USB hub support if using a hub +* Verify device is USB 2.0 compatible (USB 3.0 devices should work in USB 2.0 mode) + +**Class Driver Issues**: + +* Not all devices follow standards perfectly - may need custom handling +* Check device descriptors with USB analyzer tools +* Some composite devices may not be fully supported + +Hardware Considerations +======================= + +**Power Requirements**: + +* Host mode typically requires external power or powered USB hub +* Check board documentation for power limitations +* Some boards need jumper changes to enable host power + +**Pin Configuration**: + +* Host and device modes often use different USB connectors/pins +* Verify board supports host mode on your chosen port +* Check if OTG (On-The-Go) configuration is needed + +Next Steps +========== + +* Learn about supported USB classes in :doc:`../reference/usb_classes` +* Understand advanced integration in :doc:`../guides/integration` +* Explore TinyUSB architecture in :doc:`../explanation/architecture` \ No newline at end of file diff --git a/docs/tutorials/getting_started.rst b/docs/tutorials/getting_started.rst new file mode 100644 index 000000000..7853a9cc0 --- /dev/null +++ b/docs/tutorials/getting_started.rst @@ -0,0 +1,293 @@ +*************** +Getting Started +*************** + +This tutorial will guide you through setting up TinyUSB for your first project. We'll cover the basic integration steps and build your first example. + +Add TinyUSB to your project +--------------------------- + +To incorporate TinyUSB into your project: + +* Copy or ``git submodule`` this repository into your project in a subfolder. Let's say it is ``your_project/tinyusb`` +* Add all the ``.c`` files in the ``tinyusb/src`` folder to your project +* Add ``your_project/tinyusb/src`` to your include path. Also make sure your current include path contains the configuration file ``tusb_config.h``. +* Make sure all required macros are defined properly in ``tusb_config.h`` (the configuration file in demo applications is sufficient, but you need to add a few more such as ``CFG_TUSB_MCU``, ``CFG_TUSB_OS`` since they are passed by make/cmake to maintain a unique configuration for all boards). +* If you use the device stack, make sure you have created/modified USB descriptors for your own needs. Ultimately you need to implement all **tud descriptor** callbacks for the stack to work. +* Add a ``tusb_init(rhport, role)`` call to your reset initialization code. +* Call ``tusb_int_handler(rhport, in_isr)`` in your USB IRQ handler +* Implement all enabled classes' callbacks. +* If you don't use any RTOS at all, you need to continuously and/or periodically call the ``tud_task()``/``tuh_task()`` functions. All of the callbacks and functionality are handled and invoked within the call of that task runner. + +.. code-block:: c + + int main(void) { + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(0, &dev_init); // initialize device stack on roothub port 0 + + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(1, &host_init); // initialize host stack on roothub port 1 + + while(1) { // the mainloop + your_application_code(); + tud_task(); // device task + tuh_task(); // host task + } + } + + void USB0_IRQHandler(void) { + tusb_int_handler(0, true); + } + + void USB1_IRQHandler(void) { + tusb_int_handler(1, true); + } + +Examples +-------- + +For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API should be used. Most examples will work on most of :doc:`the supported boards `. Firstly we need to ``git clone`` if not already + +.. code-block:: bash + + $ git clone https://github.com/hathach/tinyusb tinyusb + $ cd tinyusb + +Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for TinyUSB, you should download/install them first according to the manufacturer's guide. + +Dependencies +^^^^^^^^^^^^ + +The hardware code is located in the ``hw/bsp`` folder, and is organized by family/boards. For example, raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. Before building, we first need to download dependencies such as: MCU low-level peripheral drivers and external libraries like FreeRTOS (required by some examples). We can do this in either of two ways: + +1. Run the ``tools/get_deps.py {FAMILY}`` script to download all dependencies for a family as follows. Note: For TinyUSB developers to download all dependencies, use FAMILY=all. + +.. code-block:: bash + + $ python tools/get_deps.py rp2040 + +2. Or run the ``get-deps`` target in one of the example folders as follows. + +.. code-block:: bash + + $ cd examples/device/cdc_msc + $ make BOARD=feather_nrf52840_express get-deps + +You only need to do this once per family. Check out :doc:`complete list of dependencies and their designated path here ` + +Build Examples +^^^^^^^^^^^^^^ + +Examples support make and cmake build systems for most MCUs, however some MCU families such as Espressif or RP2040 only support cmake. First change directory to an example folder. + +.. code-block:: bash + + $ cd examples/device/cdc_msc + +Then compile with make or cmake + +.. code-block:: bash + + $ # make + $ make BOARD=feather_nrf52840_express all + + $ # cmake + $ mkdir build && cd build + $ cmake -DBOARD=raspberry_pi_pico .. + $ make + +To list all available targets with cmake + +.. code-block:: bash + + $ cmake --build . --target help + +Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``99-tinyusb.rules`` and reload your udev is good to go + +.. code-block:: bash + + $ cp examples/device/99-tinyusb.rules /etc/udev/rules.d/ + $ sudo udevadm control --reload-rules && sudo udevadm trigger + +RootHub Port Selection +~~~~~~~~~~~~~~~~~~~~~~ + +If a board has several ports, one port is chosen by default in the individual board.mk file. Use option ``RHPORT_DEVICE=x`` or ``RHPORT_HOST=x`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: + +.. code-block:: bash + + $ make BOARD=stm32f746disco RHPORT_DEVICE=1 all + + $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE=1 .. + +Port Speed +~~~~~~~~~~ + +A MCU can support multiple operational speed. By default, the example build system will use the fastest supported on the board. Use option ``RHPORT_DEVICE_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` or ``RHPORT_HOST_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` e.g To force F723 operate at full instead of default high speed + +.. code-block:: bash + + $ make BOARD=stm32f746disco RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED all + + $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED .. + +Size Analysis +~~~~~~~~~~~~~ + +First install `linkermap tool `_ then ``linkermap`` target can be used to analyze code size. You may want to compile with ``NO_LTO=1`` since ``-flto`` merges code across ``.o`` files and make it difficult to analyze. + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express NO_LTO=1 all linkermap + +Debug +^^^^^ + +To compile for debugging add ``DEBUG=1``\ , for example + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express DEBUG=1 all + + $ cmake -DBOARD=feather_nrf52840_express -DCMAKE_BUILD_TYPE=Debug .. + +Log +~~~ + +Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional ``LOG=``. ``LOG=1`` will only print out error message, ``LOG=2`` print more information with on-going events. ``LOG=3`` or higher is not used yet. + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express LOG=2 all + + $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 .. + +Logger +~~~~~~ + +By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: + + +* `LOGGER=rtt`: use `Segger RTT protocol `_ + + * Cons: requires jlink as the debugger. + * Pros: work with most if not all MCUs + * Software viewer is JLink RTT Viewer/Client/Logger which is bundled with JLink driver package. + +* ``LOGGER=swo`` : Use dedicated SWO pin of ARM Cortex SWD debug header. + + * Cons: only work with ARM Cortex MCUs minus M0 + * Pros: should be compatible with more debugger that support SWO. + * Software viewer should be provided along with your debugger driver. + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=rtt all + $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=swo all + + $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=rtt .. + $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=swo .. + +Flash +^^^^^ + +``flash`` target will use the default on-board debugger (jlink/cmsisdap/stlink/dfu) to flash the binary, please install those support software in advance. Some board use bootloader/DFU via serial which is required to pass to make command + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express flash + $ make SERIAL=/dev/ttyACM0 BOARD=feather_nrf52840_express flash + +Since jlink/openocd can be used with most of the boards, there is also ``flash-jlink/openocd`` (make) and ``EXAMPLE-jlink/openocd`` target for your convenience. Note for stm32 board with stlink, you can use ``flash-stlink`` target as well. + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express flash-jlink + $ make BOARD=feather_nrf52840_express flash-openocd + + $ cmake --build . --target cdc_msc-jlink + $ cmake --build . --target cdc_msc-openocd + +Some board use uf2 bootloader for drag & drop in to mass storage device, uf2 can be generated with ``uf2`` target + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express all uf2 + + $ cmake --build . --target cdc_msc-uf2 + +IAR Support +^^^^^^^^^^^ + +Use project connection +~~~~~~~~~~~~~~~~~~~~~~ + +IAR Project Connection files are provided to import TinyUSB stack into your project. + +* A buildable project of your MCU need to be created in advance. + + * Take example of STM32F0: + + - You need ``stm32l0xx.h``, ``startup_stm32f0xx.s``, ``system_stm32f0xx.c``. + + - ``STM32L0xx_HAL_Driver`` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. + +* Open ``Tools -> Configure Custom Argument Variables`` (Switch to ``Global`` tab if you want to do it for all your projects) + Click ``New Group ...``, name it to ``TUSB``, Click ``Add Variable ...``, name it to ``TUSB_DIR``, change it's value to the path of your TinyUSB stack, + for example ``C:\\tinyusb`` + +**Import stack only** + +Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\tools\\iar_template.ipcf``. + +**Run examples** + +1. Run ``iar_gen.py`` to generate .ipcf files of examples: + + .. code-block:: + + > cd C:\tinyusb\tools + > python iar_gen.py + +2. Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\examples\\(.ipcf of example)``. + For example ``C:\\tinyusb\\examples\\device\\cdc_msc\\iar_cdc_msc.ipcf`` + +Native CMake support +~~~~~~~~~~~~~~~~~~~~ + +With 9.50.1 release, IAR added experimental native CMake support (strangely not mentioned in public release note). Now it's possible to import CMakeLists.txt then build and debug as a normal project. + +Following these steps: + +1. Add IAR compiler binary path to system ``PATH`` environment variable, such as ``C:\Program Files\IAR Systems\Embedded Workbench 9.2\arm\bin``. +2. Create new project in IAR, in Tool chain dropdown menu, choose CMake for Arm then Import ``CMakeLists.txt`` from chosen example directory. +3. Set up board option in ``Option - CMake/CMSIS-TOOLBOX - CMake``, for example ``-DBOARD=stm32f439nucleo -DTOOLCHAIN=iar``, **Uncheck 'Override tools in env'**. +4. (For debug only) Choose correct CPU model in ``Option - General Options - Target``, to profit register and memory view. + +Common Issues and Solutions +--------------------------- + +**Build Errors** + +* **"arm-none-eabi-gcc: command not found"**: Install ARM GCC toolchain: ``sudo apt-get install gcc-arm-none-eabi`` +* **"Board 'X' not found"**: Check available boards in ``hw/bsp/FAMILY/boards/`` or run ``python tools/build.py -l`` +* **Missing dependencies**: Run ``python tools/get_deps.py FAMILY`` where FAMILY matches your board + +**Runtime Issues** + +* **Device not recognized**: Check USB descriptors implementation and ``tusb_config.h`` settings +* **Enumeration failure**: Enable logging with ``LOG=2`` and check for USB protocol errors +* **Hard faults/crashes**: Verify interrupt handler setup and stack size allocation + +Next Steps +---------- + +* Try the :doc:`first_device` tutorial to implement a simple USB device +* Read about :doc:`../guides/integration` for production projects +* Check :doc:`../reference/boards` for board-specific information diff --git a/docs/tutorials/index.rst b/docs/tutorials/index.rst new file mode 100644 index 000000000..6cf8f6ded --- /dev/null +++ b/docs/tutorials/index.rst @@ -0,0 +1,12 @@ +********* +Tutorials +********* + +Step-by-step learning guides for TinyUSB development. + +.. toctree:: + :maxdepth: 2 + + getting_started + first_device + first_host \ No newline at end of file -- cgit v1.3.1 From e7b851d9ac2657e591f772dd3fa326e2d8d00270 Mon Sep 17 00:00:00 2001 From: c1570 Date: Thu, 25 Sep 2025 00:20:45 +0200 Subject: Naming conventions, buffer handling --- docs/explanation/usb_concepts.rst | 94 ++++++++++++++++++++++++++++++++++++-- docs/reference/configuration.rst | 5 ++ docs/reference/glossary.rst | 10 +++- docs/tutorials/getting_started.rst | 3 ++ 4 files changed, 107 insertions(+), 5 deletions(-) diff --git a/docs/explanation/usb_concepts.rst b/docs/explanation/usb_concepts.rst index 02ba76770..e276b4c96 100644 --- a/docs/explanation/usb_concepts.rst +++ b/docs/explanation/usb_concepts.rst @@ -4,6 +4,18 @@ USB Concepts This document provides a brief introduction to USB protocol fundamentals that are essential for understanding TinyUSB development. +TinyUSB API Naming Conventions +=============================== + +TinyUSB uses consistent function prefixes to organize its API: + +* **tusb_**: Core stack functions (initialization, interrupt handling) +* **tud_**: Device stack functions (e.g., ``tud_task()``, ``tud_cdc_write()``) +* **tuh_**: Host stack functions (e.g., ``tuh_task()``, ``tuh_cdc_receive()``) +* **tu_**: Internal utility functions (generally not used by applications) + +This naming makes it easy to identify which part of the stack a function belongs to and ensures there are no naming conflicts when using both device and host stacks together. + USB Protocol Basics ==================== @@ -252,10 +264,10 @@ USB supports multiple speed modes: **TinyUSB Speed Support**: Most TinyUSB ports support Full Speed and High Speed. Speed is typically auto-detected by hardware. Configure speed requirements in board configuration (``hw/bsp/FAMILY/boards/BOARD/board.mk``) and ensure your MCU supports the desired speed. -USB Device Controllers -====================== +USB Controller Abstraction +=========================== -USB device controllers are hardware peripherals that handle the low-level USB protocol implementation. Understanding how they work helps explain TinyUSB's architecture and portability. +USB controllers are hardware peripherals that handle the low-level USB protocol implementation. Understanding how they work helps explain TinyUSB's architecture and portability. Controller Fundamentals ----------------------- @@ -316,6 +328,42 @@ These internal details don't matter to users of TinyUSB typically; however, when - ``dcd_int_handler()`` - Process USB interrupts - ``dcd_connect()/dcd_disconnect()`` - Control USB bus connection +Host Controller Driver (HCD) +----------------------------- + +TinyUSB also abstracts USB host controllers through the **Host Controller Driver (HCD)** layer for host mode applications. + +**Portable Interface** (``src/host/usbh.h``): +- Standardized interface for all host controllers +- Common device enumeration and pipe management +- Unified transfer scheduling and completion handling + +**Common HCD Functions**: +- ``hcd_init()`` - Initialize host controller hardware +- ``hcd_port_connect_status()`` - Check device connection status +- ``hcd_port_reset()`` - Reset connected device +- ``hcd_edpt_open()`` - Open communication pipe to device endpoint +- ``hcd_edpt_xfer()`` - Transfer data to/from connected device + +**Host vs Device Architecture**: While DCD is reactive (responds to host requests), HCD is active (initiates all communication). Host controllers manage device enumeration, driver loading, and transfer scheduling to multiple connected devices. + +TinyUSB Event System & Thread Safety +==================================== + +Deferred Interrupt Processing +----------------------------- + +**Core Architectural Principle**: TinyUSB uses a deferred interrupt processing model where all USB hardware events are captured in interrupt service routines (ISRs) but processed later in non-interrupt context. + +**Event Flow**: + +1. **Hardware Event**: USB controller generates interrupt (e.g., data received, transfer complete) +2. **ISR Handling**: TinyUSB ISR captures the event and pushes it to a central event queue +3. **Deferred Processing**: Application calls ``tud_task()`` or ``tuh_task()`` to process queued events +4. **Class Driver Callbacks**: Events trigger appropriate class driver functions and user callbacks + +**Buffer Integration**: The deferred processing model works seamlessly with TinyUSB's buffer/FIFO design. Since callbacks run in task context (not ISR), it's safe and straightforward to enqueue TX data directly in RX callbacks - for example, processing incoming CDC data and immediately sending a response. + Controller Event Flow --------------------- @@ -329,6 +377,46 @@ Controller Event Flow 6. **Class Notification**: Appropriate class drivers handle the event 7. **Application Callback**: User code responds to the event +USB Class Driver Architecture +============================== + +TinyUSB implements USB classes through a standardized driver pattern that provides consistent integration with the core stack while allowing class-specific functionality. + +Class Driver Pattern +--------------------- + +**Standardized Entry Points**: Each class driver implements these core functions: + +- ``*_init()`` - Initialize class driver state and buffers +- ``*_reset()`` - Reset to initial state on USB bus reset +- ``*_open()`` - Parse and configure interfaces during enumeration +- ``*_control_xfer_cb()`` - Handle class-specific control requests +- ``*_xfer_cb()`` - Handle transfer completion callbacks + +**Multi-Instance Support**: Classes support multiple instances using ``_n`` suffixed APIs: + +.. code-block:: c + + // Single instance (default instance 0) + tud_cdc_write(data, len); + + // Multiple instances + tud_cdc_n_write(0, data, len); // Instance 0 + tud_cdc_n_write(1, data, len); // Instance 1 + +**Integration with Core Stack**: Class drivers are automatically discovered and integrated through function pointers in driver tables. The core stack calls class drivers during enumeration, control requests, and data transfers without requiring explicit registration. + +Class Driver Types +------------------- + +TinyUSB classes have different architectural patterns based on their buffering capabilities and callback designs. + +Most classes like CDC, MIDI, and HID always use internal buffers for data management. These classes provide notification-only callbacks such as ``tud_cdc_rx_cb(uint8_t itf)`` that signal when data is available, requiring applications to use class-specific APIs like ``tud_cdc_read()`` and ``tud_cdc_write()`` to access the data. HID is slightly different in that it provides direct buffer access in some callbacks (``tud_hid_set_report_cb()`` receives buffer and size parameters), but it still maintains internal endpoint buffering that cannot be disabled. + +The **Vendor Class** is unique in that it supports both buffered and direct modes. When buffered, vendor class behaves like other classes with ``tud_vendor_read()`` and ``tud_vendor_write()`` APIs. However, when buffering is disabled by setting buffer size to 0, the vendor class provides direct buffer access through ``tud_vendor_rx_cb(itf, buffer, bufsize)`` callbacks, eliminating internal FIFO overhead and providing direct endpoint control. + +**Block-Oriented Classes** like MSC operate differently by handling large data blocks through callback interfaces. The application implements storage access functions such as ``tud_msc_read10_cb()`` and ``tud_msc_write10_cb()``, while the TinyUSB stack manages the USB protocol aspects and the application manages the underlying storage. + Power Management ================ diff --git a/docs/reference/configuration.rst b/docs/reference/configuration.rst index 8d6dd6190..79aeb15d8 100644 --- a/docs/reference/configuration.rst +++ b/docs/reference/configuration.rst @@ -106,6 +106,11 @@ Device Classes #define CFG_TUD_VENDOR 1 // Number of vendor interfaces #define CFG_TUD_VENDOR_EPSIZE 64 // Vendor endpoint size + #define CFG_TUD_VENDOR_RX_BUFSIZE 64 // RX buffer size (0 = no buffering) + #define CFG_TUD_VENDOR_TX_BUFSIZE 64 // TX buffer size (0 = no buffering) + +.. note:: + Unlike other classes, vendor class supports setting buffer sizes to 0 to disable internal buffering. When disabled, data goes directly to ``tud_vendor_rx_cb()`` and the ``tud_vendor_read()``/``tud_vendor_write()`` functions are not available - applications must handle data directly in callbacks. Host Stack Configuration ======================== diff --git a/docs/reference/glossary.rst b/docs/reference/glossary.rst index e6e92738f..56ee49619 100644 --- a/docs/reference/glossary.rst +++ b/docs/reference/glossary.rst @@ -14,7 +14,7 @@ Glossary USB transfer type used for device configuration and control. All USB devices must support control transfers on endpoint 0. DCD - Device Controller Driver. The hardware abstraction layer for USB device controllers in TinyUSB. + Device Controller Driver. The hardware abstraction layer for USB device controllers in TinyUSB. See also HCD. Descriptor Data structures that describe USB device capabilities, configuration, and interfaces to the host. @@ -32,7 +32,7 @@ Glossary Process where USB host discovers and configures a newly connected device. HCD - Host Controller Driver. The hardware abstraction layer for USB host controllers in TinyUSB. + Host Controller Driver. The hardware abstraction layer for USB host controllers in TinyUSB. See also DCD. HID Human Interface Device. USB class for input devices like keyboards, mice, and game controllers. @@ -73,6 +73,12 @@ Glossary Super Speed USB 3.0 speed mode operating at 5 Gbps. Not supported by TinyUSB. + tud + TinyUSB Device. Function prefix for all device stack APIs (e.g., ``tud_task()``, ``tud_cdc_write()``). + + tuh + TinyUSB Host. Function prefix for all host stack APIs (e.g., ``tuh_task()``, ``tuh_cdc_receive()``). + UAC USB Audio Class. USB class for audio devices. diff --git a/docs/tutorials/getting_started.rst b/docs/tutorials/getting_started.rst index 7853a9cc0..432b0b682 100644 --- a/docs/tutorials/getting_started.rst +++ b/docs/tutorials/getting_started.rst @@ -19,6 +19,9 @@ To incorporate TinyUSB into your project: * Implement all enabled classes' callbacks. * If you don't use any RTOS at all, you need to continuously and/or periodically call the ``tud_task()``/``tuh_task()`` functions. All of the callbacks and functionality are handled and invoked within the call of that task runner. +.. note:: + TinyUSB uses consistent naming prefixes: ``tud_`` for device stack functions and ``tuh_`` for host stack functions. See the :doc:`../reference/glossary` for more details. + .. code-block:: c int main(void) { -- cgit v1.3.1 From 75f2a8451e6ab622f8974b77b76b16ac2d057349 Mon Sep 17 00:00:00 2001 From: c1570 Date: Thu, 25 Sep 2025 01:01:01 +0200 Subject: improve flow --- docs/explanation/architecture.rst | 25 ++++++++--------------- docs/explanation/usb_concepts.rst | 23 ++++----------------- docs/reference/configuration.rst | 14 +++++++++---- docs/reference/usb_classes.rst | 5 +---- docs/troubleshooting.rst | 43 +++++---------------------------------- docs/tutorials/first_device.rst | 8 ++++++-- 6 files changed, 34 insertions(+), 84 deletions(-) diff --git a/docs/explanation/architecture.rst b/docs/explanation/architecture.rst index 4c63b198d..aa0c76128 100644 --- a/docs/explanation/architecture.rst +++ b/docs/explanation/architecture.rst @@ -12,10 +12,7 @@ Memory Safety TinyUSB is designed for resource-constrained embedded systems with strict memory requirements: -- **No dynamic allocation**: All memory is statically allocated at compile time -- **Bounded buffers**: All buffers have compile-time defined sizes -- **Stack-based design**: No heap usage in the core stack -- **Predictable memory usage**: Memory consumption is deterministic +TinyUSB uses **no dynamic allocation** - all memory is statically allocated at compile time for predictability. All buffers have bounded, compile-time defined sizes to prevent overflow issues. The TinyUSB core avoids heap allocation, resulting in **predictable memory usage** where consumption is fully deterministic. Thread Safety ------------- @@ -54,7 +51,7 @@ TinyUSB follows a layered architecture from hardware to application: ├─────────────────────────────────────────┤ │ Device/Host Stack Core │ ← USB protocol handling ├─────────────────────────────────────────┤ - │ Hardware Abstraction (DCD/HCD) │ ← MCU-specific drivers + │ Hardware Abstraction (DCD/HCD) │ ← MCU-specific drivers ├─────────────────────────────────────────┤ │ OS Abstraction (OSAL) │ ← RTOS integration ├─────────────────────────────────────────┤ @@ -79,6 +76,8 @@ Component Overview Device Stack Architecture ========================= +This section is concerned with the **Device Stack**, i.e., the component of TinyUSB used in USB devices (that talk to a USB host). + Core Components --------------- @@ -138,6 +137,8 @@ TinyUSB uses a deferred interrupt model for thread safety: Host Stack Architecture ======================= +This section is concerned with the **Host Stack**, i.e., the component of TinyUSB used in USB hosts, managing connected USB devices. + Core Components --------------- @@ -223,12 +224,7 @@ Memory Management Static Allocation Model ----------------------- -TinyUSB uses only static memory allocation: - -- **Endpoint Buffers**: Fixed-size buffers for each endpoint -- **Class Buffers**: Static buffers for class-specific data -- **Control Buffers**: Fixed buffer for control transfers -- **Queue Buffers**: Static event queues +TinyUSB uses only static memory allocation; it allocates fixed-size endpoint buffers for each configured endpoint, static buffers for class-specific data handling, a fixed buffer dedicated to control transfers, and static event queues for deferred interrupt processing. Buffer Management ----------------- @@ -254,12 +250,7 @@ Threading Model Task-Based Design ----------------- -TinyUSB uses a cooperative task model: - -- **Main Tasks**: ``tud_task()`` for device, ``tuh_task()`` for host -- **Regular Execution**: Tasks must be called regularly (< 1ms typical) -- **Event Processing**: All USB events processed in task context -- **Callback Execution**: Application callbacks run in task context +TinyUSB uses a cooperative task model; it provides main tasks - ``tud_task()`` for device and ``tuh_task()`` for host operation. These tasks must be called regularly (typically less than 1ms intervals) to ensure all USB events are processed in task context, where application callbacks also execute. RTOS Integration ---------------- diff --git a/docs/explanation/usb_concepts.rst b/docs/explanation/usb_concepts.rst index e276b4c96..8b315aea2 100644 --- a/docs/explanation/usb_concepts.rst +++ b/docs/explanation/usb_concepts.rst @@ -134,27 +134,16 @@ Endpoint Basics Endpoint Configuration ---------------------- -Each endpoint is configured with: -- **Transfer type**: Control, bulk, interrupt, or isochronous -- **Direction**: IN, OUT, or bidirectional (control only) -- **Maximum packet size**: Depends on USB speed and transfer type -- **Interval**: For interrupt and isochronous endpoints +Each endpoint is configured with a specific **transfer type** (control, bulk, interrupt, or isochronous), a **direction** (IN, OUT, or bidirectional for control only), a **maximum packet size** that depends on USB speed and transfer type, and an **interval** for interrupt and isochronous endpoints. **TinyUSB Configuration**: Endpoint characteristics are defined in descriptors (``usb_descriptors.c``) and automatically configured by the stack. Buffer sizes are set via ``CFG_TUD_*_EP_BUFSIZE`` macros. Error Handling and Flow Control ------------------------------- -**Transfer Results**: USB transfers can complete with different results: -- **ACK**: Successful transfer -- **NAK**: Device not ready (used for flow control) -- **STALL**: Error condition or unsupported request -- **Timeout**: Transfer failed to complete in time +**Transfer Results**: USB transfers can complete with different results. An **ACK** indicates a successful transfer, while a **NAK** signals that the device is not ready (commonly used for flow control). A **STALL** response indicates an error condition or unsupported request, and **Timeout** occurs when a transfer fails to complete within the expected time frame. -**Flow Control in USB**: Unlike network protocols, USB doesn't use congestion control. Instead: -- Devices use NAK responses when not ready to receive data -- Applications implement buffering and proper timing -- Some classes (like CDC) support hardware flow control (RTS/CTS) +**Flow Control in USB**: Unlike network protocols, USB doesn't use traditional congestion control. Instead, devices use NAK responses when not ready to receive data, applications implement buffering and proper timing strategies, and some classes (like CDC) support hardware flow control mechanisms such as RTS/CTS. **TinyUSB Handling**: Transfer results are represented as ``xfer_result_t`` enum values. The stack automatically handles NAK responses and timing. STALL conditions indicate application-level errors that should be addressed in class drivers. @@ -278,11 +267,7 @@ Controller Fundamentals - Generate interrupts for USB events - Implement USB electrical specifications -**Key Components**: -- **Physical Layer**: USB signal drivers and receivers -- **Protocol Engine**: Handles USB packets, ACK/NAK responses -- **Endpoint Buffers**: Hardware FIFOs or RAM for data storage -- **Interrupt Controller**: Generates events for software processing +**Key Components**: USB controllers consist of several key components working together. The **Physical Layer** provides USB signal drivers and receivers for electrical interfacing. The **Protocol Engine** handles USB packets and ACK/NAK responses according to the USB specification. **Endpoint Buffers** provide hardware FIFOs or RAM for data storage during transfers. Finally, the **Interrupt Controller** generates events for software processing when USB activities occur. Controller Architecture Types ----------------------------- diff --git a/docs/reference/configuration.rst b/docs/reference/configuration.rst index 79aeb15d8..fa0a874f5 100644 --- a/docs/reference/configuration.rst +++ b/docs/reference/configuration.rst @@ -173,15 +173,21 @@ Memory Management RTOS Configuration ------------------ -**FreeRTOS**: +TinyUSB supports multiple operating systems through its OSAL (Operating System Abstraction Layer). Choose the appropriate configuration based on your target environment. + +**FreeRTOS Integration**: + +When using FreeRTOS, configure the task queue sizes to handle USB events efficiently: .. code-block:: c #define CFG_TUSB_OS OPT_OS_FREERTOS - #define CFG_TUD_TASK_QUEUE_SZ 16 - #define CFG_TUH_TASK_QUEUE_SZ 16 + #define CFG_TUD_TASK_QUEUE_SZ 16 // Device task queue size + #define CFG_TUH_TASK_QUEUE_SZ 16 // Host task queue size + +**RT-Thread Integration**: -**RT-Thread**: +RT-Thread requires only the OS selection, as it uses the RTOS's built-in primitives: .. code-block:: c diff --git a/docs/reference/usb_classes.rst b/docs/reference/usb_classes.rst index 00a251ffb..387587b48 100644 --- a/docs/reference/usb_classes.rst +++ b/docs/reference/usb_classes.rst @@ -268,10 +268,7 @@ Most classes require callback functions: Performance Considerations -------------------------- -- **Buffer Sizes**: Match endpoint buffer sizes to expected data rates -- **Transfer Types**: Use appropriate USB transfer types (bulk, interrupt, isochronous) -- **CPU Usage**: Minimize processing in interrupt context -- **Memory Usage**: Static allocation only, no dynamic memory +When implementing USB classes, match **buffer sizes** to expected data rates to avoid bottlenecks. Choose appropriate **transfer types** based on your application's requirements. Keep **callback processing** lightweight for optimal performance. Avoid **memory allocations in critical paths** where possible to maintain consistent performance. Testing and Validation ---------------------- diff --git a/docs/troubleshooting.rst b/docs/troubleshooting.rst index 1f0f388df..e30210d01 100644 --- a/docs/troubleshooting.rst +++ b/docs/troubleshooting.rst @@ -177,11 +177,7 @@ Slow Transfer Speeds **Symptoms**: Lower than expected USB transfer rates -*Causes and solutions*: -- **Task scheduling**: Call ``tud_task()``/``tuh_task()`` more frequently -- **Endpoint buffer sizes**: Increase buffer sizes for bulk transfers -- **DMA usage**: Enable DMA for USB transfers if supported -- **USB speed**: Use High Speed (480 Mbps) instead of Full Speed (12 Mbps) +*Causes and solutions*: Improve **task scheduling** by calling ``tud_task()``/``tuh_task()`` more frequently to ensure timely USB event processing. Consider increasing **endpoint buffer sizes** for bulk transfers to reduce the frequency of small transfers. Enable **DMA usage** for USB transfers if your hardware supports it to offload CPU processing. Finally, use **High Speed** (480 Mbps) instead of Full Speed (12 Mbps) when possible to achieve better throughput. High CPU Usage -------------- @@ -194,34 +190,6 @@ High CPU Usage - Optimize descriptor parsing - Use DMA for data transfers -Memory Issues -============= - -Stack Overflow --------------- - -**Symptoms**: Hard faults, random crashes, especially during enumeration - -*Diagnosis*: -- Build with ``DEBUG=1`` and use debugger -- Check stack pointer before/after USB operations -- Monitor stack usage with RTOS tools - -*Solutions*: -- Increase stack size in linker script -- Reduce local variable usage in callbacks -- Use static buffers instead of large stack arrays - -Heap Issues ------------ - -**Note**: TinyUSB doesn't use dynamic allocation, but your application might. - -*Check*: -- Application code using malloc/free -- RTOS heap usage -- Third-party library allocations - Hardware-Specific Issues ======================== @@ -246,10 +214,6 @@ RP2040 Issues - CPU overclocking may be needed for reliable operation - Timing-sensitive - avoid long interrupt disable periods -**Flash/RAM constraints**: -- Large USB applications may exceed RP2040 limits -- Use code optimization and remove unused features - ESP32 Issues ------------ @@ -273,6 +237,9 @@ For complex issues, hardware USB analyzers provide detailed protocol traces: Debugging with GDB ------------------ +Debugging with traditional debuggers is limited due to the real time nature of USB. +However, especially for diagnosis of crashes, it can still be useful. + .. code-block:: bash # Build with debug info @@ -315,4 +282,4 @@ When reporting issues: **Resources**: - GitHub Discussions: https://github.com/hathach/tinyusb/discussions - Issue Tracker: https://github.com/hathach/tinyusb/issues -- Documentation: https://docs.tinyusb.org \ No newline at end of file +- Documentation: https://docs.tinyusb.org diff --git a/docs/tutorials/first_device.rst b/docs/tutorials/first_device.rst index 9fac2df49..1b9ed5b0a 100644 --- a/docs/tutorials/first_device.rst +++ b/docs/tutorials/first_device.rst @@ -40,7 +40,7 @@ Key files in the example: * ``usb_descriptors.c`` - USB device descriptors * ``tusb_config.h`` - TinyUSB stack configuration -**Main Loop Pattern**: +The main loop follows a simple pattern that combines board initialization, TinyUSB initialization, and continuous task processing: .. code-block:: c @@ -54,11 +54,13 @@ Key files in the example: } } -**Device Task**: ``tud_task()`` must be called regularly to handle USB events and maintain the connection. +The ``tud_task()`` function must be called regularly to handle USB events and maintain the connection with the host. This function processes all queued USB events and triggers appropriate callbacks in your application code. Step 3: Build and Test ====================== +With a clear understanding of the code structure, you're ready to build and test the example. This process involves fetching dependencies, compiling for your target board, and flashing the firmware: + .. code-block:: bash # Fetch dependencies for your board family @@ -78,6 +80,8 @@ Step 3: Build and Test Step 4: Customize for Your Needs ================================= +Once you have the basic example working, you can customize it for your specific application. The following modifications demonstrate common customization patterns. + **Simplify to CDC-only**: 1. In ``tusb_config.h``, disable MSC: -- cgit v1.3.1 From a332acf5ead28089c732428a4254354baec9afd6 Mon Sep 17 00:00:00 2001 From: c1570 Date: Thu, 25 Sep 2025 01:18:56 +0200 Subject: rearrage TOC --- docs/index.rst | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/docs/index.rst b/docs/index.rst index 9fbc5bd30..3a70f2471 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -29,30 +29,15 @@ Documentation Structure .. toctree:: :maxdepth: 2 - :caption: Learning + :caption: Information + explanation/index tutorials/index - -.. toctree:: - :maxdepth: 2 - :caption: Problem Solving - guides/index + reference/index faq troubleshooting -.. toctree:: - :maxdepth: 2 - :caption: Information - - reference/index - -.. toctree:: - :maxdepth: 2 - :caption: Understanding - - explanation/index - .. toctree:: :maxdepth: 1 :caption: Project Info @@ -67,3 +52,8 @@ Documentation Structure Source Code Issue Tracker Discussions + +GitHub Project Main README +========================== + +.. include:: ../README_processed.rst -- cgit v1.3.1 From 39e2e5167c3b59176293023eaf0249a5b3955f0c Mon Sep 17 00:00:00 2001 From: c1570 Date: Fri, 26 Sep 2025 18:34:10 +0200 Subject: improved getting_started, integrated "first device/host" --- docs/explanation/usb_concepts.rst | 6 +- docs/faq.rst | 2 +- docs/guides/index.rst | 10 - docs/guides/integration.rst | 494 ------------------------------------- docs/reference/glossary.rst | 3 + docs/tutorials/first_device.rst | 151 ------------ docs/tutorials/first_host.rst | 160 ------------ docs/tutorials/getting_started.rst | 176 ++++++++----- docs/tutorials/index.rst | 4 +- 9 files changed, 126 insertions(+), 880 deletions(-) delete mode 100644 docs/guides/index.rst delete mode 100644 docs/guides/integration.rst delete mode 100644 docs/tutorials/first_device.rst delete mode 100644 docs/tutorials/first_host.rst diff --git a/docs/explanation/usb_concepts.rst b/docs/explanation/usb_concepts.rst index 8b315aea2..e3d400921 100644 --- a/docs/explanation/usb_concepts.rst +++ b/docs/explanation/usb_concepts.rst @@ -30,7 +30,7 @@ Host and Device Roles - Manages the USB bus - Enumerates and configures devices -**TinyUSB Host Stack**: Enable with ``CFG_TUH_ENABLED=1`` in ``tusb_config.h``. Call ``tuh_task()`` regularly in your main loop. See :doc:`../tutorials/first_host` for implementation details. +**TinyUSB Host Stack**: Enable with ``CFG_TUH_ENABLED=1`` in ``tusb_config.h``. Call ``tuh_task()`` regularly in your main loop. See the :doc:`../tutorials/getting_started` Quick Start Examples for implementation details. **USB Device**: The peripheral side (keyboard, mouse, storage device, etc.). Devices: - Respond to host requests @@ -38,7 +38,7 @@ Host and Device Roles - Receive power from the host - Must be enumerated by the host before use -**TinyUSB Device Stack**: Enable with ``CFG_TUD_ENABLED=1`` in ``tusb_config.h``. Call ``tud_task()`` regularly in your main loop. See :doc:`../tutorials/first_device` for implementation details. +**TinyUSB Device Stack**: Enable with ``CFG_TUD_ENABLED=1`` in ``tusb_config.h``. Call ``tud_task()`` regularly in your main loop. See the :doc:`../tutorials/getting_started` Quick Start Examples for implementation details. **OTG (On-The-Go)**: Some devices can switch between host and device roles dynamically. **TinyUSB Support**: Both stacks can be enabled simultaneously on OTG-capable hardware. See ``examples/dual/`` for dual-role implementations. @@ -422,4 +422,4 @@ Next Steps - Start with :doc:`../tutorials/getting_started` for basic setup - Review :doc:`../reference/configuration` for configuration options -- Check :doc:`../guides/integration` for advanced integration scenarios +- Explore :doc:`../examples` for advanced use cases diff --git a/docs/faq.rst b/docs/faq.rst index ede97032d..505833316 100644 --- a/docs/faq.rst +++ b/docs/faq.rst @@ -38,7 +38,7 @@ Run ``python tools/get_deps.py FAMILY`` where FAMILY is your MCU family (e.g., s **Q: Can I use my own build system instead of Make/CMake?** -Yes, just add all ``.c`` files from ``src/`` to your project and configure include paths. See :doc:`guides/integration` for details. +Yes, just add all ``.c`` files from ``src/`` to your project and configure include paths. See :doc:`tutorials/getting_started` for details. **Q: Error: "tusb_config.h: No such file or directory"** diff --git a/docs/guides/index.rst b/docs/guides/index.rst deleted file mode 100644 index cad3dd27f..000000000 --- a/docs/guides/index.rst +++ /dev/null @@ -1,10 +0,0 @@ -********** -How-to Guides -********** - -Problem-solving guides for common TinyUSB development tasks. - -.. toctree:: - :maxdepth: 2 - - integration \ No newline at end of file diff --git a/docs/guides/integration.rst b/docs/guides/integration.rst deleted file mode 100644 index c135c5ec6..000000000 --- a/docs/guides/integration.rst +++ /dev/null @@ -1,494 +0,0 @@ -********************* -Integration Guide -********************* - -This guide covers integrating TinyUSB into production projects with your own build system, custom hardware, and specific requirements. - -Project Integration Methods -============================ - -Method 1: Git Submodule (Recommended) --------------------------------------- - -Best for projects using git version control. - -.. code-block:: bash - - # Add TinyUSB as submodule - git submodule add https://github.com/hathach/tinyusb.git lib/tinyusb - git submodule update --init --recursive - -**Advantages:** -- Pinned to specific TinyUSB version -- Easy to update with ``git submodule update`` -- Version control tracks exact TinyUSB commit - -Method 2: Package Manager Integration -------------------------------------- - -**PlatformIO:** - -.. code-block:: ini - - ; platformio.ini - [env:myboard] - platform = your_platform - board = your_board - framework = arduino ; or other framework - lib_deps = - https://github.com/hathach/tinyusb.git - -**CMake FetchContent:** - -.. code-block:: cmake - - include(FetchContent) - FetchContent_Declare( - tinyusb - GIT_REPOSITORY https://github.com/hathach/tinyusb.git - GIT_TAG master # or specific version tag - ) - FetchContent_MakeAvailable(tinyusb) - -Method 3: Direct Copy ---------------------- - -Copy TinyUSB source files directly into your project. - -.. code-block:: bash - - # Copy only source files - cp -r tinyusb/src/ your_project/lib/tinyusb/ - -**Note:** You'll need to manually update when TinyUSB releases new versions. - -Build System Integration -======================== - -Make/GCC Integration --------------------- - -**Makefile example:** - -.. code-block:: make - - # TinyUSB settings - TUSB_DIR = lib/tinyusb - TUSB_SRC_DIR = $(TUSB_DIR)/src - - # Include paths - CFLAGS += -I$(TUSB_SRC_DIR) - CFLAGS += -I. # For tusb_config.h - - # MCU and OS settings (pass to compiler) - CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_STM32F4 - CFLAGS += -DCFG_TUSB_OS=OPT_OS_NONE - - # TinyUSB source files - SRC_C += $(wildcard $(TUSB_SRC_DIR)/*.c) - SRC_C += $(wildcard $(TUSB_SRC_DIR)/common/*.c) - SRC_C += $(wildcard $(TUSB_SRC_DIR)/device/*.c) - SRC_C += $(wildcard $(TUSB_SRC_DIR)/class/*/*.c) - SRC_C += $(wildcard $(TUSB_SRC_DIR)/portable/$(VENDOR)/$(CHIP_FAMILY)/*.c) - -**Finding the right portable driver:** - -.. code-block:: bash - - # List available drivers - find lib/tinyusb/src/portable -name "*.c" | grep stm32 - # Use: lib/tinyusb/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - -CMake Integration ------------------ - -**CMakeLists.txt example:** - -.. code-block:: cmake - - # TinyUSB configuration - set(FAMILY_MCUS STM32F4) # Set your MCU family - set(CFG_TUSB_MCU OPT_MCU_STM32F4) - set(CFG_TUSB_OS OPT_OS_FREERTOS) # or OPT_OS_NONE - - # Add TinyUSB - add_subdirectory(lib/tinyusb) - - # Your project - add_executable(your_app - src/main.c - src/usb_descriptors.c - # other sources - ) - - # Link TinyUSB - target_link_libraries(your_app - tinyusb_device # or tinyusb_host - # other libraries - ) - - # Include paths - target_include_directories(your_app PRIVATE - src/ # For tusb_config.h - ) - - # Compile definitions - target_compile_definitions(your_app PRIVATE - CFG_TUSB_MCU=${CFG_TUSB_MCU} - CFG_TUSB_OS=${CFG_TUSB_OS} - ) - -IAR Embedded Workbench ----------------------- - -Use project connection files for easy integration: - -1. Open IAR project -2. Add TinyUSB project connection: ``Tools → Configure Custom Argument Variables`` -3. Create ``TUSB`` group, add ``TUSB_DIR`` variable -4. Import ``tinyusb/tools/iar_template.ipcf`` - -Keil µVision ------------- - -.. code-block:: none - - # Add to project groups: - TinyUSB/Common: src/common/*.c - TinyUSB/Device: src/device/*.c, src/class/*/*.c - TinyUSB/Portable: src/portable/vendor/family/*.c - - # Include paths: - src/ # tusb_config.h location - lib/tinyusb/src/ - - # Preprocessor defines: - CFG_TUSB_MCU=OPT_MCU_STM32F4 - CFG_TUSB_OS=OPT_OS_NONE - -Configuration Setup -=================== - -Create tusb_config.h --------------------- - -This is the most critical file for TinyUSB integration: - -.. code-block:: c - - // tusb_config.h - #ifndef _TUSB_CONFIG_H_ - #define _TUSB_CONFIG_H_ - - // MCU selection - REQUIRED - #ifndef CFG_TUSB_MCU - #define CFG_TUSB_MCU OPT_MCU_STM32F4 - #endif - - // OS selection - REQUIRED - #ifndef CFG_TUSB_OS - #define CFG_TUSB_OS OPT_OS_NONE - #endif - - // Debug level - #define CFG_TUSB_DEBUG 0 - - // Device stack - #define CFG_TUD_ENABLED 1 - #define CFG_TUD_ENDPOINT0_SIZE 64 - - // Device classes - #define CFG_TUD_CDC 1 - #define CFG_TUD_HID 0 - #define CFG_TUD_MSC 0 - - // CDC configuration - #define CFG_TUD_CDC_EP_BUFSIZE 512 - #define CFG_TUD_CDC_RX_BUFSIZE 512 - #define CFG_TUD_CDC_TX_BUFSIZE 512 - - #endif - -USB Descriptors ---------------- - -Create or modify ``usb_descriptors.c`` for your device: - -.. code-block:: c - - #include "tusb.h" - - // Device descriptor - tusb_desc_device_t const desc_device = { - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, - .bDeviceClass = TUSB_CLASS_MISC, - .bDeviceSubClass = MISC_SUBCLASS_COMMON, - .bDeviceProtocol = MISC_PROTOCOL_IAD, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, // Your VID - .idProduct = 0x4000, // Your PID - .bcdDevice = 0x0100, - .iManufacturer = 0x01, - .iProduct = 0x02, - .iSerialNumber = 0x03, - .bNumConfigurations = 0x01 - }; - - // Get device descriptor - uint8_t const* tud_descriptor_device_cb(void) { - return (uint8_t const*)&desc_device; - } - - // Configuration descriptor - implement based on your needs - uint8_t const* tud_descriptor_configuration_cb(uint8_t index) { - // Return configuration descriptor - } - - // String descriptors - uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { - // Return string descriptors - } - -Application Integration -====================== - -Main Loop Integration --------------------- - -.. code-block:: c - - #include "tusb.h" - - int main(void) { - // Board/MCU initialization - board_init(); // Your board setup - - // USB stack initialization - tusb_init(); - - while (1) { - // USB device task - MUST be called regularly - tud_task(); - - // Your application code - your_app_task(); - } - } - -Interrupt Handler Setup ------------------------ - -**STM32 example:** - -.. code-block:: c - - // USB interrupt handler - void OTG_FS_IRQHandler(void) { - tud_int_handler(0); - } - -**RP2040 example:** - -.. code-block:: c - - void isr_usbctrl(void) { - tud_int_handler(0); - } - -Class Implementation --------------------- - -Implement required callbacks for enabled classes: - -.. code-block:: c - - // CDC class callbacks - void tud_cdc_line_coding_cb(uint8_t itf, cdc_line_coding_t const* p_line_coding) { - // Handle line coding changes - } - - void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { - // Handle DTR/RTS changes - } - -RTOS Integration -=============== - -FreeRTOS Integration -------------------- - -.. code-block:: c - - // USB task - void usb_device_task(void* param) { - while (1) { - tud_task(); - vTaskDelay(1); // 1ms delay - } - } - - // Create USB task - xTaskCreate(usb_device_task, "usbd", - 256, NULL, configMAX_PRIORITIES-1, NULL); - -**Configuration:** - -.. code-block:: c - - // In tusb_config.h - #define CFG_TUSB_OS OPT_OS_FREERTOS - #define CFG_TUD_TASK_QUEUE_SZ 16 - -RT-Thread Integration --------------------- - -.. code-block:: c - - // In tusb_config.h - #define CFG_TUSB_OS OPT_OS_RTTHREAD - - // USB thread - void usb_thread_entry(void* parameter) { - tusb_init(); - while (1) { - tud_task(); - rt_thread_mdelay(1); - } - } - -Custom Hardware Integration -=========================== - -Clock Configuration -------------------- - -USB requires precise 48MHz clock: - -**STM32 example:** - -.. code-block:: c - - // Configure PLL for 48MHz USB clock - RCC_OscInitStruct.PLL.PLLQ = 7; // Adjust for 48MHz - HAL_RCC_OscConfig(&RCC_OscInitStruct); - -**RP2040 example:** - -.. code-block:: c - - // USB clock is automatically configured by SDK - -Pin Configuration ------------------ - -Configure USB pins correctly: - -**STM32 example:** - -.. code-block:: c - - // USB pins: PA11 (DM), PA12 (DP) - GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - -Power Management ---------------- - -For battery-powered applications: - -.. code-block:: c - - // Implement suspend/resume callbacks - void tud_suspend_cb(bool remote_wakeup_en) { - // Enter low power mode - } - - void tud_resume_cb(void) { - // Exit low power mode - } - -Testing and Validation -====================== - -Build Verification ------------------- - -.. code-block:: bash - - # Test build - make clean && make all - - # Check binary size - arm-none-eabi-size build/firmware.elf - - # Verify no undefined symbols - arm-none-eabi-nm build/firmware.elf | grep " U " - -Runtime Testing ---------------- - -1. **Device Recognition**: Check if device appears in system -2. **Enumeration**: Verify all descriptors are valid -3. **Class Functionality**: Test class-specific features -4. **Performance**: Measure transfer rates and latency -5. **Stress Testing**: Long-running tests with connect/disconnect - -Debugging Integration Issues -============================ - -Common Problems ---------------- - -1. **Device not recognized**: Check descriptors and configuration -2. **Build errors**: Verify include paths and source files -3. **Link errors**: Check library dependencies -4. **Runtime crashes**: Enable debug builds and use debugger -5. **Poor performance**: Profile code and optimize critical paths - -Debug Builds ------------- - -.. code-block:: c - - // In tusb_config.h for debugging - #define CFG_TUSB_DEBUG 2 - #define CFG_TUSB_DEBUG_PRINTF printf - -Enable logging to identify issues quickly. - -Production Considerations -========================= - -Code Size Optimization ----------------------- - -.. code-block:: c - - // Minimal configuration - #define CFG_TUSB_DEBUG 0 - #define CFG_TUD_CDC 1 - #define CFG_TUD_HID 0 - #define CFG_TUD_MSC 0 - // Disable unused classes - -Performance Optimization ------------------------- - -- Use DMA for USB transfers if available -- Optimize descriptor sizes -- Use appropriate endpoint buffer sizes -- Consider high-speed USB for high bandwidth applications - -Compliance and Certification ----------------------------- - -- Validate descriptors against USB specifications -- Test with USB-IF compliance tools -- Consider USB-IF certification for commercial products -- Test with multiple host operating systems \ No newline at end of file diff --git a/docs/reference/glossary.rst b/docs/reference/glossary.rst index 56ee49619..561780c53 100644 --- a/docs/reference/glossary.rst +++ b/docs/reference/glossary.rst @@ -4,6 +4,9 @@ Glossary .. glossary:: + BSP + Board Support Package. A collection of board-specific code that provides hardware abstraction for a particular development board, including pin mappings, clock settings, linker scripts, and hardware initialization routines. Located in ``hw/bsp/FAMILY/boards/BOARD_NAME``. + Bulk Transfer USB transfer type used for large amounts of data that doesn't require guaranteed timing. Used by mass storage devices and CDC class. diff --git a/docs/tutorials/first_device.rst b/docs/tutorials/first_device.rst deleted file mode 100644 index 1b9ed5b0a..000000000 --- a/docs/tutorials/first_device.rst +++ /dev/null @@ -1,151 +0,0 @@ -********************* -Your First USB Device -********************* - -This tutorial walks you through creating a simple USB CDC (serial) device using TinyUSB. By the end, you'll have a working USB device that appears as a serial port on your computer. - -Prerequisites -============= - -* Completed :doc:`getting_started` tutorial -* Development board with USB device capability (e.g., STM32F4 Discovery, Raspberry Pi Pico) -* Basic understanding of C programming - -Understanding USB Device Basics -=============================== - -A USB device needs three key components: - -1. **USB Descriptors**: Tell the host what kind of device this is -2. **Class Implementation**: Handle USB class-specific requests (CDC, HID, etc.) -3. **Application Logic**: Your main application code - -Step 1: Choose Your Starting Point -================================== - -We'll start with the ``cdc_msc`` example as it's the most commonly used and well-tested. - -.. code-block:: bash - - cd examples/device/cdc_msc - -This example implements both CDC (virtual serial port) and MSC (mass storage) classes. - -Step 2: Understand the Code Structure -===================================== - -Key files in the example: - -* ``main.c`` - Main application loop and board initialization -* ``usb_descriptors.c`` - USB device descriptors -* ``tusb_config.h`` - TinyUSB stack configuration - -The main loop follows a simple pattern that combines board initialization, TinyUSB initialization, and continuous task processing: - -.. code-block:: c - - int main(void) { - board_init(); - tusb_init(); - - while (1) { - tud_task(); // TinyUSB device task - cdc_task(); // Application-specific CDC handling - } - } - -The ``tud_task()`` function must be called regularly to handle USB events and maintain the connection with the host. This function processes all queued USB events and triggers appropriate callbacks in your application code. - -Step 3: Build and Test -====================== - -With a clear understanding of the code structure, you're ready to build and test the example. This process involves fetching dependencies, compiling for your target board, and flashing the firmware: - -.. code-block:: bash - - # Fetch dependencies for your board family - python ../../../tools/get_deps.py stm32f4 # Replace with your family - - # Build for your board - make BOARD=stm32f407disco all - - # Flash to device - make BOARD=stm32f407disco flash - -**Expected Result**: After flashing, connect the USB port to your computer. You should see: - -* A new serial port device (e.g., ``/dev/ttyACM0`` on Linux, ``COMx`` on Windows) -* A small mass storage device - -Step 4: Customize for Your Needs -================================= - -Once you have the basic example working, you can customize it for your specific application. The following modifications demonstrate common customization patterns. - -**Simplify to CDC-only**: - -1. In ``tusb_config.h``, disable MSC: - -.. code-block:: c - - #define CFG_TUD_MSC 0 // Disable Mass Storage - -2. Remove MSC-related code from ``main.c`` and ``usb_descriptors.c`` - -**Modify Device Information**: - -In ``usb_descriptors.c``: - -.. code-block:: c - - tusb_desc_device_t const desc_device = { - .idVendor = 0xCafe, // Your vendor ID - .idProduct = 0x4000, // Your product ID - .bcdDevice = 0x0100, // Device version - // ... other fields - }; - -**Add Application Logic**: - -In the CDC task function, add your serial communication logic: - -.. code-block:: c - - void cdc_task(void) { - if (tud_cdc_available()) { - uint8_t buf[64]; - uint32_t count = tud_cdc_read(buf, sizeof(buf)); - - // Echo back what was received - tud_cdc_write(buf, count); - tud_cdc_write_flush(); - } - } - -Common Issues and Solutions -=========================== - -**Device Not Recognized**: - -* Check USB cable (must support data, not just power) -* Verify descriptors are valid using ``LOG=2`` build option -* Ensure ``tud_task()`` is called regularly in main loop - -**Build Errors**: - -* Missing dependencies: Run ``python tools/get_deps.py FAMILY`` -* Wrong board name: Check ``hw/bsp/FAMILY/boards/`` for valid names -* Compiler issues: Install ``gcc-arm-none-eabi`` - -**Runtime Issues**: - -* Hard faults: Check stack size in linker script -* USB not working: Verify clock configuration and USB pin setup -* Serial data corruption: Ensure proper flow control in CDC implementation - -Next Steps -========== - -* Learn about other device classes in :doc:`../reference/usb_classes` -* Understand advanced integration in :doc:`../guides/integration` -* Explore TinyUSB architecture in :doc:`../explanation/architecture` \ No newline at end of file diff --git a/docs/tutorials/first_host.rst b/docs/tutorials/first_host.rst deleted file mode 100644 index 5b406ad34..000000000 --- a/docs/tutorials/first_host.rst +++ /dev/null @@ -1,160 +0,0 @@ -****************** -Your First USB Host -****************** - -This tutorial guides you through creating a simple USB host application that can connect to and communicate with USB devices. - -Prerequisites -============= - -* Completed :doc:`getting_started` and :doc:`first_device` tutorials -* Development board with USB host capability (e.g., STM32F4 Discovery with USB-A connector) -* USB device to test with (USB drive, mouse, keyboard, or CDC device) - -Understanding USB Host Basics -============================= - -A USB host application needs: - -1. **Device Enumeration**: Detect and configure connected devices -2. **Class Drivers**: Handle communication with specific device types -3. **Application Logic**: Process data from/to the connected devices - -Step 1: Start with an Example -============================= - -Use the ``cdc_msc_hid`` host example: - -.. code-block:: bash - - cd examples/host/cdc_msc_hid - -This example can communicate with CDC (serial), MSC (storage), and HID (keyboard/mouse) devices. - -Step 2: Understand the Code Structure -===================================== - -Key components: - -* ``main.c`` - Main loop and device event handling -* Host callbacks - Functions called when devices connect/disconnect -* Class-specific handlers - Process data from different device types - -**Main Loop Pattern**: - -.. code-block:: c - - int main(void) { - board_init(); - tusb_init(); - - while (1) { - tuh_task(); // TinyUSB host task - // Handle connected devices - } - } - -**Connection Events**: TinyUSB calls your callbacks when devices connect: - -.. code-block:: c - - void tuh_mount_cb(uint8_t dev_addr) { - printf("Device connected, address = %d\\n", dev_addr); - } - - void tuh_umount_cb(uint8_t dev_addr) { - printf("Device disconnected, address = %d\\n", dev_addr); - } - -Step 3: Build and Test -====================== - -.. code-block:: bash - - # Fetch dependencies - python ../../../tools/get_deps.py stm32f4 - - # Build - make BOARD=stm32f407disco all - - # Flash - make BOARD=stm32f407disco flash - -**Testing**: Connect different USB devices and observe the output via serial console. - -Step 4: Handle Specific Device Types -==================================== - -**Mass Storage (USB Drive)**: - -.. code-block:: c - - void tuh_msc_mount_cb(uint8_t dev_addr) { - printf("USB Drive mounted\\n"); - // Read/write files - } - -**HID Devices (Keyboard/Mouse)**: - -.. code-block:: c - - void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, - uint8_t const* desc_report, uint16_t desc_len) { - uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); - if (itf_protocol == HID_ITF_PROTOCOL_KEYBOARD) { - printf("Keyboard connected\\n"); - } - } - -**CDC Devices (Serial)**: - -.. code-block:: c - - void tuh_cdc_mount_cb(uint8_t idx) { - printf("CDC device mounted\\n"); - // Configure serial settings - tuh_cdc_set_baudrate(idx, 115200, NULL, 0); - } - -Common Issues and Solutions -=========================== - -**No Device Detection**: - -* Check power supply - host mode requires more power than device mode -* Verify USB connector wiring and type (USB-A for host vs USB micro/C for device) -* Enable logging with ``LOG=2`` to see enumeration process - -**Enumeration Failures**: - -* Some devices need more time - increase timeouts -* Check USB hub support if using a hub -* Verify device is USB 2.0 compatible (USB 3.0 devices should work in USB 2.0 mode) - -**Class Driver Issues**: - -* Not all devices follow standards perfectly - may need custom handling -* Check device descriptors with USB analyzer tools -* Some composite devices may not be fully supported - -Hardware Considerations -======================= - -**Power Requirements**: - -* Host mode typically requires external power or powered USB hub -* Check board documentation for power limitations -* Some boards need jumper changes to enable host power - -**Pin Configuration**: - -* Host and device modes often use different USB connectors/pins -* Verify board supports host mode on your chosen port -* Check if OTG (On-The-Go) configuration is needed - -Next Steps -========== - -* Learn about supported USB classes in :doc:`../reference/usb_classes` -* Understand advanced integration in :doc:`../guides/integration` -* Explore TinyUSB architecture in :doc:`../explanation/architecture` \ No newline at end of file diff --git a/docs/tutorials/getting_started.rst b/docs/tutorials/getting_started.rst index 432b0b682..35a9aa9bf 100644 --- a/docs/tutorials/getting_started.rst +++ b/docs/tutorials/getting_started.rst @@ -2,22 +2,22 @@ Getting Started *************** -This tutorial will guide you through setting up TinyUSB for your first project. We'll cover the basic integration steps and build your first example. +This tutorial will guide you through setting up TinyUSB for your first project. We'll cover the basic integration steps and build your first example application. Add TinyUSB to your project --------------------------- To incorporate TinyUSB into your project: -* Copy or ``git submodule`` this repository into your project in a subfolder. Let's say it is ``your_project/tinyusb`` +* Copy this repository or add it as a git submodule to a subfolder in your project. For example, place it at ``your_project/tinyusb`` * Add all the ``.c`` files in the ``tinyusb/src`` folder to your project -* Add ``your_project/tinyusb/src`` to your include path. Also make sure your current include path contains the configuration file ``tusb_config.h``. -* Make sure all required macros are defined properly in ``tusb_config.h`` (the configuration file in demo applications is sufficient, but you need to add a few more such as ``CFG_TUSB_MCU``, ``CFG_TUSB_OS`` since they are passed by make/cmake to maintain a unique configuration for all boards). -* If you use the device stack, make sure you have created/modified USB descriptors for your own needs. Ultimately you need to implement all **tud descriptor** callbacks for the stack to work. +* Add ``your_project/tinyusb/src`` to your include path. Also ensure that your include path contains the configuration file ``tusb_config.h``. +* Ensure all required macros are properly defined in ``tusb_config.h``. The configuration file from the demo applications provides a good starting point, but you'll need to add additional macros such as ``CFG_TUSB_MCU`` and ``CFG_TUSB_OS``. These are typically passed by make/cmake to maintain unique configurations for different boards. +* If you're using the device stack, ensure you have created or modified USB descriptors to meet your specific requirements. Ultimately you need to implement all **tud descriptor** callbacks for the stack to work. * Add a ``tusb_init(rhport, role)`` call to your reset initialization code. -* Call ``tusb_int_handler(rhport, in_isr)`` in your USB IRQ handler +* Call ``tusb_int_handler(rhport, in_isr)`` from your USB IRQ handler * Implement all enabled classes' callbacks. -* If you don't use any RTOS at all, you need to continuously and/or periodically call the ``tud_task()``/``tuh_task()`` functions. All of the callbacks and functionality are handled and invoked within the call of that task runner. +* If you're not using an RTOS, you must call the ``tud_task()``/``tuh_task()`` functions continuously or periodically. These task functions handle all callbacks and core functionality. .. note:: TinyUSB uses consistent naming prefixes: ``tud_`` for device stack functions and ``tuh_`` for host stack functions. See the :doc:`../reference/glossary` for more details. @@ -62,14 +62,16 @@ For your convenience, TinyUSB contains a handful of examples for both host and d $ git clone https://github.com/hathach/tinyusb tinyusb $ cd tinyusb -Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for TinyUSB, you should download/install them first according to the manufacturer's guide. +Some ports require additional port-specific SDKs (e.g., for RP2040) or binaries (e.g., for Sony Spresense) to build examples. These components are outside the scope of TinyUSB, so you should download and install them first according to the manufacturer's documentation. Dependencies ^^^^^^^^^^^^ -The hardware code is located in the ``hw/bsp`` folder, and is organized by family/boards. For example, raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. Before building, we first need to download dependencies such as: MCU low-level peripheral drivers and external libraries like FreeRTOS (required by some examples). We can do this in either of two ways: +TinyUSB separates example applications from board-specific hardware configurations. Example applications live in ``examples/device``, ``examples/host``, and ``examples/dual`` directories, while Board Support Package (BSP) configurations are stored in ``hw/bsp/FAMILY/boards/BOARD_NAME``. The BSP provides hardware abstraction including pin mappings, clock settings, linker scripts, and hardware initialization routines. For example, raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. When you build an example with ``BOARD=raspberry_pi_pico``, the build system automatically finds and uses the corresponding BSP. -1. Run the ``tools/get_deps.py {FAMILY}`` script to download all dependencies for a family as follows. Note: For TinyUSB developers to download all dependencies, use FAMILY=all. +Before building, you must first download dependencies including MCU low-level peripheral drivers and external libraries such as FreeRTOS (required by some examples). You can do this in either of two ways: + +1. Run the ``tools/get_deps.py {FAMILY}`` script to download all dependencies for a specific MCU family. To download dependencies for all families, use ``FAMILY=all``. .. code-block:: bash @@ -87,7 +89,7 @@ You only need to do this once per family. Check out :doc:`complete list of depen Build Examples ^^^^^^^^^^^^^^ -Examples support make and cmake build systems for most MCUs, however some MCU families such as Espressif or RP2040 only support cmake. First change directory to an example folder. +Examples support both Make and CMake build systems for most MCUs. However, some MCU families (such as Espressif and RP2040) only support CMake. First change directory to an example folder. .. code-block:: bash @@ -111,7 +113,7 @@ To list all available targets with cmake $ cmake --build . --target help -Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``99-tinyusb.rules`` and reload your udev is good to go +Note: Some examples, especially those that use Vendor class (e.g., webUSB), may require udev permissions on Linux (and/or macOS) to access USB devices. It depends on your OS distribution, but typically copying ``99-tinyusb.rules`` and reloading udev is sufficient .. code-block:: bash @@ -132,7 +134,7 @@ If a board has several ports, one port is chosen by default in the individual bo Port Speed ~~~~~~~~~~ -A MCU can support multiple operational speed. By default, the example build system will use the fastest supported on the board. Use option ``RHPORT_DEVICE_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` or ``RHPORT_HOST_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` e.g To force F723 operate at full instead of default high speed +An MCU can support multiple operational speeds. By default, the example build system uses the fastest speed supported by the board. Use the option ``RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED/OPT_MODE_HIGH_SPEED`` or ``RHPORT_HOST_SPEED=OPT_MODE_FULL_SPEED/OPT_MODE_HIGH_SPEED``. For example, to force the F723 to operate at full speed instead of the default high speed: .. code-block:: bash @@ -149,8 +151,36 @@ First install `linkermap tool `_ then ``li $ make BOARD=feather_nrf52840_express NO_LTO=1 all linkermap -Debug -^^^^^ +Flashing the Device +^^^^^^^^^^^^^^^^^^^ + +The ``flash`` target uses the default on-board debugger (jlink/cmsisdap/stlink/dfu) to flash the binary. Please install the supporting software in advance. Some boards use bootloader/DFU via serial, which requires passing the serial port to the make command + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express flash + $ make SERIAL=/dev/ttyACM0 BOARD=feather_nrf52840_express flash + +Since jlink/openocd can be used with most of the boards, there is also ``flash-jlink/openocd`` (make) and ``EXAMPLE-jlink/openocd`` target for your convenience. Note for stm32 board with stlink, you can use ``flash-stlink`` target as well. + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express flash-jlink + $ make BOARD=feather_nrf52840_express flash-openocd + + $ cmake --build . --target cdc_msc-jlink + $ cmake --build . --target cdc_msc-openocd + +Some boards use UF2 bootloader for drag-and-drop into a mass storage device. UF2 files can be generated with the ``uf2`` target + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express all uf2 + + $ cmake --build . --target cdc_msc-uf2 + +Debugging +^^^^^^^^^ To compile for debugging add ``DEBUG=1``\ , for example @@ -160,10 +190,10 @@ To compile for debugging add ``DEBUG=1``\ , for example $ cmake -DBOARD=feather_nrf52840_express -DCMAKE_BUILD_TYPE=Debug .. -Log -~~~ +Enable Logging +~~~~~~~~~~~~~~ -Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional ``LOG=``. ``LOG=1`` will only print out error message, ``LOG=2`` print more information with on-going events. ``LOG=3`` or higher is not used yet. +If you encounter issues running examples or need to submit a bug report, you can enable TinyUSB's built-in debug logging with the optional ``LOG=`` parameter. ``LOG=1`` prints only error messages, while ``LOG=2`` prints more detailed information about ongoing events. ``LOG=3`` or higher is not used yet. .. code-block:: bash @@ -171,10 +201,10 @@ Should you have an issue running example and/or submitting an bug report. You co $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 .. -Logger -~~~~~~ +Logging Performance Impact +~~~~~~~~~~~~~~~~~~~~~~~~~~ -By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: +By default, log messages are printed via the on-board UART, which is slow and consumes significant CPU time compared to USB speeds. If your board supports an on-board or external debugger, it would be more efficient to use it for logging. There are 2 protocols: * `LOGGER=rtt`: use `Segger RTT protocol `_ @@ -183,9 +213,9 @@ By default log message is printed via on-board UART which is slow and take lots * Pros: work with most if not all MCUs * Software viewer is JLink RTT Viewer/Client/Logger which is bundled with JLink driver package. -* ``LOGGER=swo`` : Use dedicated SWO pin of ARM Cortex SWD debug header. +* ``LOGGER=swo``\ : Use dedicated SWO pin of ARM Cortex SWD debug header. - * Cons: only work with ARM Cortex MCUs minus M0 + * Cons: Only works with ARM Cortex MCUs except M0 * Pros: should be compatible with more debugger that support SWO. * Software viewer should be provided along with your debugger driver. @@ -197,49 +227,23 @@ By default log message is printed via on-board UART which is slow and take lots $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=rtt .. $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=swo .. -Flash -^^^^^ - -``flash`` target will use the default on-board debugger (jlink/cmsisdap/stlink/dfu) to flash the binary, please install those support software in advance. Some board use bootloader/DFU via serial which is required to pass to make command - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express flash - $ make SERIAL=/dev/ttyACM0 BOARD=feather_nrf52840_express flash - -Since jlink/openocd can be used with most of the boards, there is also ``flash-jlink/openocd`` (make) and ``EXAMPLE-jlink/openocd`` target for your convenience. Note for stm32 board with stlink, you can use ``flash-stlink`` target as well. - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express flash-jlink - $ make BOARD=feather_nrf52840_express flash-openocd - - $ cmake --build . --target cdc_msc-jlink - $ cmake --build . --target cdc_msc-openocd - -Some board use uf2 bootloader for drag & drop in to mass storage device, uf2 can be generated with ``uf2`` target - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express all uf2 - - $ cmake --build . --target cdc_msc-uf2 - IAR Support ^^^^^^^^^^^ +IAR Embedded Workbench is a commercial IDE and toolchain for embedded development. TinyUSB provides integration support for IAR through project connection files and native CMake support. + Use project connection ~~~~~~~~~~~~~~~~~~~~~~ IAR Project Connection files are provided to import TinyUSB stack into your project. -* A buildable project of your MCU need to be created in advance. +* A buildable project for your MCU needs to be created in advance. * Take example of STM32F0: - - You need ``stm32l0xx.h``, ``startup_stm32f0xx.s``, ``system_stm32f0xx.c``. + - You need ``stm32f0xx.h``, ``startup_stm32f0xx.s``, and ``system_stm32f0xx.c``. - - ``STM32L0xx_HAL_Driver`` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. + - ``STM32F0xx_HAL_Driver`` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. * Open ``Tools -> Configure Custom Argument Variables`` (Switch to ``Global`` tab if you want to do it for all your projects) Click ``New Group ...``, name it to ``TUSB``, Click ``Add Variable ...``, name it to ``TUSB_DIR``, change it's value to the path of your TinyUSB stack, @@ -279,7 +283,7 @@ Common Issues and Solutions **Build Errors** * **"arm-none-eabi-gcc: command not found"**: Install ARM GCC toolchain: ``sudo apt-get install gcc-arm-none-eabi`` -* **"Board 'X' not found"**: Check available boards in ``hw/bsp/FAMILY/boards/`` or run ``python tools/build.py -l`` +* **"Board 'X' not found"**: Check the available boards in ``hw/bsp/FAMILY/boards/`` or run ``python tools/build.py -l`` * **Missing dependencies**: Run ``python tools/get_deps.py FAMILY`` where FAMILY matches your board **Runtime Issues** @@ -288,9 +292,65 @@ Common Issues and Solutions * **Enumeration failure**: Enable logging with ``LOG=2`` and check for USB protocol errors * **Hard faults/crashes**: Verify interrupt handler setup and stack size allocation +Quick Start Examples +-------------------- + +Now that you have TinyUSB set up, you can try these examples to see it in action. + +Simple Device Example +^^^^^^^^^^^^^^^^^^^^^ + +The ``cdc_msc`` example creates a USB device with both a virtual serial port (CDC) and mass storage (MSC). This is the most commonly used example and demonstrates core device functionality. + +**What it does:** +* Appears as a serial port that echoes back any text you send +* Appears as a small USB drive with a README.TXT file +* Blinks an LED to show activity + +**Build and run:** + +.. code-block:: bash + + $ cd examples/device/cdc_msc + $ make BOARD=stm32f407disco all + $ make BOARD=stm32f407disco flash + +**Key files:** +* ``src/main.c`` - Main application with ``tud_task()`` loop +* ``src/usb_descriptors.c`` - USB device descriptors +* ``src/msc_disk.c`` - Mass storage implementation + +**Expected behavior:** Connect to your computer and you'll see both a new serial port and a small USB drive appear. + +Simple Host Example +^^^^^^^^^^^^^^^^^^^ + +The ``cdc_msc_hid`` example creates a USB host that can connect to USB devices with CDC, MSC, or HID interfaces. + +**What it does:** +* Detects and enumerates connected USB devices +* Communicates with CDC devices (like USB-to-serial adapters) +* Reads from MSC devices (like USB drives) +* Receives input from HID devices (like keyboards and mice) + +**Build and run:** + +.. code-block:: bash + + $ cd examples/host/cdc_msc_hid + $ make BOARD=stm32f407disco all + $ make BOARD=stm32f407disco flash + +**Key files:** +* ``src/main.c`` - Main application with ``tuh_task()`` loop +* ``src/cdc_app.c`` - CDC host functionality +* ``src/msc_app.c`` - Mass storage host functionality +* ``src/hid_app.c`` - HID host functionality + +**Expected behavior:** Connect USB devices to see enumeration messages and device-specific interactions in the serial output. + Next Steps ----------- +^^^^^^^^^^ -* Try the :doc:`first_device` tutorial to implement a simple USB device -* Read about :doc:`../guides/integration` for production projects * Check :doc:`../reference/boards` for board-specific information +* Explore more :doc:`../examples` for advanced use cases diff --git a/docs/tutorials/index.rst b/docs/tutorials/index.rst index 6cf8f6ded..dc362d717 100644 --- a/docs/tutorials/index.rst +++ b/docs/tutorials/index.rst @@ -7,6 +7,4 @@ Step-by-step learning guides for TinyUSB development. .. toctree:: :maxdepth: 2 - getting_started - first_device - first_host \ No newline at end of file + getting_started \ No newline at end of file -- cgit v1.3.1 From 82aa46d8ea9370944440cc40b87738ebeabb9593 Mon Sep 17 00:00:00 2001 From: c1570 Date: Sat, 27 Sep 2025 00:30:24 +0200 Subject: more consolidation --- docs/explanation/architecture.rst | 296 ------------------------- docs/explanation/index.rst | 11 - docs/explanation/usb_concepts.rst | 425 ------------------------------------ docs/faq.rst | 2 +- docs/getting_started.rst | 357 +++++++++++++++++++++++++++++++ docs/index.rst | 12 +- docs/reference/architecture.rst | 291 +++++++++++++++++++++++++ docs/reference/configuration.rst | 307 -------------------------- docs/reference/index.rst | 5 +- docs/reference/usb_classes.rst | 287 ------------------------- docs/reference/usb_concepts.rst | 428 +++++++++++++++++++++++++++++++++++++ docs/tutorials/getting_started.rst | 356 ------------------------------ docs/tutorials/index.rst | 10 - 13 files changed, 1083 insertions(+), 1704 deletions(-) delete mode 100644 docs/explanation/architecture.rst delete mode 100644 docs/explanation/index.rst delete mode 100644 docs/explanation/usb_concepts.rst create mode 100644 docs/getting_started.rst create mode 100644 docs/reference/architecture.rst delete mode 100644 docs/reference/configuration.rst delete mode 100644 docs/reference/usb_classes.rst create mode 100644 docs/reference/usb_concepts.rst delete mode 100644 docs/tutorials/getting_started.rst delete mode 100644 docs/tutorials/index.rst diff --git a/docs/explanation/architecture.rst b/docs/explanation/architecture.rst deleted file mode 100644 index aa0c76128..000000000 --- a/docs/explanation/architecture.rst +++ /dev/null @@ -1,296 +0,0 @@ -************ -Architecture -************ - -This document explains TinyUSB's internal architecture, design principles, and how different components work together. - -Design Principles -================= - -Memory Safety -------------- - -TinyUSB is designed for resource-constrained embedded systems with strict memory requirements: - -TinyUSB uses **no dynamic allocation** - all memory is statically allocated at compile time for predictability. All buffers have bounded, compile-time defined sizes to prevent overflow issues. The TinyUSB core avoids heap allocation, resulting in **predictable memory usage** where consumption is fully deterministic. - -Thread Safety -------------- - -TinyUSB achieves thread safety through a deferred interrupt model: - -- **ISR deferral**: USB interrupts are captured and deferred to task context -- **Single-threaded processing**: All USB protocol handling occurs in task context -- **Queue-based design**: Events are queued from ISR and processed in ``tud_task()`` -- **RTOS integration**: Proper semaphore/mutex usage for shared resources - -Portability ------------ - -The stack is designed to work across diverse microcontroller families: - -- **Hardware abstraction**: MCU-specific code isolated in portable drivers -- **OS abstraction**: RTOS dependencies isolated in OSAL layer -- **Modular design**: Features can be enabled/disabled at compile time -- **Standard compliance**: Strict adherence to USB specifications - -Core Architecture -================= - -Layer Structure ---------------- - -TinyUSB follows a layered architecture from hardware to application: - -.. code-block:: none - - ┌─────────────────────────────────────────┐ - │ Application Layer │ ← Your code - ├─────────────────────────────────────────┤ - │ USB Class Drivers │ ← CDC, HID, MSC, etc. - ├─────────────────────────────────────────┤ - │ Device/Host Stack Core │ ← USB protocol handling - ├─────────────────────────────────────────┤ - │ Hardware Abstraction (DCD/HCD) │ ← MCU-specific drivers - ├─────────────────────────────────────────┤ - │ OS Abstraction (OSAL) │ ← RTOS integration - ├─────────────────────────────────────────┤ - │ Common Utilities & FIFO │ ← Shared components - └─────────────────────────────────────────┘ - -Component Overview ------------------- - -**Application Layer**: Your main application code that uses TinyUSB APIs. - -**Class Drivers**: Implement specific USB device classes (CDC, HID, MSC, etc.) and handle class-specific requests. - -**Device/Host Core**: Implements USB protocol state machines, endpoint management, and core USB functionality. - -**Hardware Abstraction**: MCU-specific code that interfaces with USB peripheral hardware. - -**OS Abstraction**: Provides threading primitives and synchronization for different RTOS environments. - -**Common Utilities**: Shared code including FIFO implementations, binary helpers, and utility functions. - -Device Stack Architecture -========================= - -This section is concerned with the **Device Stack**, i.e., the component of TinyUSB used in USB devices (that talk to a USB host). - -Core Components ---------------- - -**Device Controller Driver (DCD)**: -- MCU-specific USB device peripheral driver -- Handles endpoint configuration and data transfers -- Abstracts hardware differences between MCU families -- Located in ``src/portable/VENDOR/FAMILY/`` - -**USB Device Core (USBD)**: -- Implements USB device state machine -- Handles standard USB requests (Chapter 9) -- Manages device configuration and enumeration -- Located in ``src/device/`` - -**Class Drivers**: -- Implement USB class specifications -- Handle class-specific requests and data transfer -- Provide application APIs -- Located in ``src/class/*/`` - -Data Flow ---------- - -**Control Transfers (Setup Requests)**: - -.. code-block:: none - - USB Bus → DCD → USBD Core → Class Driver → Application - ↓ - Standard requests handled in core - ↓ - Class-specific requests → Class Driver - -**Data Transfers**: - -.. code-block:: none - - Application → Class Driver → USBD Core → DCD → USB Bus - USB Bus → DCD → USBD Core → Class Driver → Application - -Event Processing ----------------- - -TinyUSB uses a deferred interrupt model for thread safety: - -1. **Interrupt Occurs**: USB hardware generates interrupt -2. **ISR Handler**: ``dcd_int_handler()`` captures event, minimal processing -3. **Event Queuing**: Events queued for later processing -4. **Task Processing**: ``tud_task()`` (called by application code) processes queued events -5. **Callback Execution**: Application callbacks executed in task context - -.. code-block:: none - - USB IRQ → ISR → Event Queue → tud_task() → Class Callbacks → Application - -Host Stack Architecture -======================= - -This section is concerned with the **Host Stack**, i.e., the component of TinyUSB used in USB hosts, managing connected USB devices. - -Core Components ---------------- - -**Host Controller Driver (HCD)**: -- MCU-specific USB host peripheral driver -- Manages USB pipes and data transfers -- Handles host controller hardware -- Located in ``src/portable/VENDOR/FAMILY/`` - -**USB Host Core (USBH)**: -- Implements USB host functionality -- Manages device enumeration and configuration -- Handles pipe management and scheduling -- Located in ``src/host/`` - -**Hub Driver**: -- Manages USB hub devices -- Handles port management and device detection -- Supports multi-level hub topologies -- Located in ``src/host/`` - -Device Enumeration ------------------- - -The host stack follows USB enumeration process: - -1. **Device Detection**: Hub or root hub detects device connection -2. **Reset and Address**: Reset device, assign unique address -3. **Descriptor Retrieval**: Get device, configuration, and class descriptors -4. **Driver Matching**: Find appropriate class driver for device -5. **Configuration**: Configure device and start communication -6. **Class Operation**: Normal class-specific communication - -.. code-block:: none - - Device Connect → Reset → Get Descriptors → Load Driver → Configure → Operate - -Class Architecture -================== - -Common Class Structure ----------------------- - -All USB classes follow a similar architecture: - -**Device Classes**: -- ``*_device.c``: Device-side implementation -- ``*_device.h``: Device API definitions -- Implement class-specific descriptors -- Handle class requests and data transfer - -**Host Classes**: -- ``*_host.c``: Host-side implementation -- ``*_host.h``: Host API definitions -- Manage connected devices of this class -- Provide application interface - -Class Driver Interface ----------------------- - -**Required Functions**: -- ``init()``: Initialize class driver -- ``reset()``: Reset class state -- ``open()``: Configure class endpoints -- ``control_xfer_cb()``: Handle control requests -- ``xfer_cb()``: Handle data transfer completion - -**Optional Functions**: -- ``close()``: Clean up class resources -- ``sof_cb()``: Start-of-frame processing - -Descriptor Management ---------------------- - -Each class is responsible for: -- **Interface Descriptors**: Define class type and endpoints -- **Class-Specific Descriptors**: Additional class requirements -- **Endpoint Descriptors**: Define data transfer characteristics - -Memory Management -================= - -Static Allocation Model ------------------------ - -TinyUSB uses only static memory allocation; it allocates fixed-size endpoint buffers for each configured endpoint, static buffers for class-specific data handling, a fixed buffer dedicated to control transfers, and static event queues for deferred interrupt processing. - -Buffer Management ------------------ - -**Endpoint Buffers**: -- Allocated per endpoint at compile time -- Size defined by ``CFG_TUD_*_EP_BUFSIZE`` macros -- Used for USB data transfers - -**FIFO Buffers**: -- Ring buffers for streaming data -- Size defined by ``CFG_TUD_*_RX/TX_BUFSIZE`` macros -- Separate read/write pointers - -**DMA Considerations**: -- Buffers must be DMA-accessible on some MCUs -- Alignment requirements vary by hardware -- Cache coherency handled in portable drivers - -Threading Model -=============== - -Task-Based Design ------------------ - -TinyUSB uses a cooperative task model; it provides main tasks - ``tud_task()`` for device and ``tuh_task()`` for host operation. These tasks must be called regularly (typically less than 1ms intervals) to ensure all USB events are processed in task context, where application callbacks also execute. - -RTOS Integration ----------------- - -**Bare Metal**: -- Application calls ``tud_task()`` in main loop -- No threading primitives needed -- Simplest integration method - -**FreeRTOS**: -- USB task runs at high priority -- Semaphores used for synchronization -- Queue for inter-task communication - -**Other RTOS**: -- Similar patterns with RTOS-specific primitives -- OSAL layer abstracts RTOS differences - -Interrupt Handling ------------------- - -**Interrupt Service Routine**: -- Minimal processing in ISR -- Event capture and queuing only -- Quick return to avoid blocking - -**Deferred Processing**: -- All complex processing in task context -- Thread-safe access to data structures -- Application callbacks in known context - -Memory Usage Patterns ---------------------- - -**Flash Memory**: -- Core stack: 8-15KB depending on features -- Each class: 1-4KB additional -- Portable driver: 2-8KB depending on MCU - -**RAM Usage**: -- Core stack: 1-2KB -- Endpoint buffers: User configurable -- Class buffers: Depends on configuration diff --git a/docs/explanation/index.rst b/docs/explanation/index.rst deleted file mode 100644 index 695efd9e0..000000000 --- a/docs/explanation/index.rst +++ /dev/null @@ -1,11 +0,0 @@ -*********** -Explanation -*********** - -Deep understanding of TinyUSB's design, architecture, and concepts. - -.. toctree:: - :maxdepth: 2 - - architecture - usb_concepts \ No newline at end of file diff --git a/docs/explanation/usb_concepts.rst b/docs/explanation/usb_concepts.rst deleted file mode 100644 index e3d400921..000000000 --- a/docs/explanation/usb_concepts.rst +++ /dev/null @@ -1,425 +0,0 @@ -************ -USB Concepts -************ - -This document provides a brief introduction to USB protocol fundamentals that are essential for understanding TinyUSB development. - -TinyUSB API Naming Conventions -=============================== - -TinyUSB uses consistent function prefixes to organize its API: - -* **tusb_**: Core stack functions (initialization, interrupt handling) -* **tud_**: Device stack functions (e.g., ``tud_task()``, ``tud_cdc_write()``) -* **tuh_**: Host stack functions (e.g., ``tuh_task()``, ``tuh_cdc_receive()``) -* **tu_**: Internal utility functions (generally not used by applications) - -This naming makes it easy to identify which part of the stack a function belongs to and ensures there are no naming conflicts when using both device and host stacks together. - -USB Protocol Basics -==================== - -Universal Serial Bus (USB) is a standardized communication protocol designed for connecting devices to hosts (typically computers). Understanding these core concepts is essential for effective TinyUSB development. - -Host and Device Roles ----------------------- - -**USB Host**: The controlling side of a USB connection (typically a computer). The host: -- Initiates all communication -- Provides power to devices -- Manages the USB bus -- Enumerates and configures devices - -**TinyUSB Host Stack**: Enable with ``CFG_TUH_ENABLED=1`` in ``tusb_config.h``. Call ``tuh_task()`` regularly in your main loop. See the :doc:`../tutorials/getting_started` Quick Start Examples for implementation details. - -**USB Device**: The peripheral side (keyboard, mouse, storage device, etc.). Devices: -- Respond to host requests -- Cannot initiate communication -- Receive power from the host -- Must be enumerated by the host before use - -**TinyUSB Device Stack**: Enable with ``CFG_TUD_ENABLED=1`` in ``tusb_config.h``. Call ``tud_task()`` regularly in your main loop. See the :doc:`../tutorials/getting_started` Quick Start Examples for implementation details. - -**OTG (On-The-Go)**: Some devices can switch between host and device roles dynamically. **TinyUSB Support**: Both stacks can be enabled simultaneously on OTG-capable hardware. See ``examples/dual/`` for dual-role implementations. - -USB Transfers -============= - -Every USB transfer consists of the host issuing a request, and the device replying to that request. The host is the bus master and initiates all communication. -Devices cannot initiate sending data; for unsolicited incoming data, polling is used by the host. - -USB defines four transfer types, each intended for different use cases: - -Control Transfers ------------------ - -Used for device configuration and control commands. - -**Characteristics**: -- Bidirectional (uses both IN and OUT) -- Guaranteed delivery with error detection -- Limited data size (8-64 bytes per packet) -- All devices must support control transfers on endpoint 0 - -**Usage**: Device enumeration, configuration changes, class-specific commands - -**TinyUSB Context**: Handled automatically by the core stack for standard requests; class drivers handle class-specific requests. Endpoint 0 is managed by ``src/device/usbd.c`` and ``src/host/usbh.c``. Configure buffer size with ``CFG_TUD_ENDPOINT0_SIZE`` (typically 64 bytes). - -Bulk Transfers --------------- - -Used for large amounts of data that don't require guaranteed timing. - -**Characteristics**: -- Unidirectional (separate IN and OUT endpoints) -- Guaranteed delivery with error detection -- Large packet sizes (up to 512 bytes for High Speed) -- Uses available bandwidth when no other transfers are active - -**Usage**: File transfers, large data communication, CDC serial data - -**TinyUSB Context**: Used by MSC (mass storage) and CDC classes for data transfer. Configure endpoint buffer sizes with ``CFG_TUD_MSC_EP_BUFSIZE`` and ``CFG_TUD_CDC_EP_BUFSIZE``. See ``src/class/msc/`` and ``src/class/cdc/`` for implementation details. - -Interrupt Transfers -------------------- - -Used for small, time-sensitive data with guaranteed maximum latency. - -**Characteristics**: -- Unidirectional (separate IN and OUT endpoints) -- Guaranteed delivery with error detection -- Small packet sizes (up to 64 bytes for Full Speed) -- Regular polling interval (1ms to 255ms) - -**Usage**: Keyboard/mouse input, sensor data, status updates - -**TinyUSB Context**: Used by HID class for input reports. Configure with ``CFG_TUD_HID`` and ``CFG_TUD_HID_EP_BUFSIZE``. Send reports using ``tud_hid_report()`` or ``tud_hid_keyboard_report()``. See ``src/class/hid/`` and HID examples in ``examples/device/hid_*/``. - -Isochronous Transfers ---------------------- - -Used for time-critical streaming data. - -**Characteristics**: -- Unidirectional (separate IN and OUT endpoints) -- No error correction (speed over reliability) -- Guaranteed bandwidth -- Real-time delivery - -**Usage**: Audio, video streaming - -**TinyUSB Context**: Used by Audio class for streaming audio data. Configure with ``CFG_TUD_AUDIO`` and related audio configuration macros. See ``src/class/audio/`` and audio examples in ``examples/device/audio_*/`` for UAC2 implementation. - -Endpoints and Addressing -========================= - -Endpoint Basics ---------------- - -**Endpoint**: A communication channel between host and device. - -- Each endpoint has a number (0-15) and direction -- Endpoint 0 is reserved for control transfers -- Other endpoints are assigned by device class requirements - -**TinyUSB Endpoint Management**: Configure maximum endpoints with ``CFG_TUD_ENDPOINT_MAX``. Endpoints are automatically allocated by enabled classes. See your board's ``usb_descriptors.c`` for endpoint assignments. - -**Direction**: -- **OUT**: Host to device (host sends data out) -- **IN**: Device to host (host reads data in) -- Note that in TinyUSB code, for ``tx``/``rx``, the device perspective is used typically: E.g., ``tud_cdc_tx_complete_cb()`` designates the callback executed once the device has completed sending data to the host (in device mode). - -**Addressing**: Endpoints are addressed as EPx IN/OUT (e.g., EP1 IN, EP2 OUT) - -Endpoint Configuration ----------------------- - -Each endpoint is configured with a specific **transfer type** (control, bulk, interrupt, or isochronous), a **direction** (IN, OUT, or bidirectional for control only), a **maximum packet size** that depends on USB speed and transfer type, and an **interval** for interrupt and isochronous endpoints. - -**TinyUSB Configuration**: Endpoint characteristics are defined in descriptors (``usb_descriptors.c``) and automatically configured by the stack. Buffer sizes are set via ``CFG_TUD_*_EP_BUFSIZE`` macros. - -Error Handling and Flow Control -------------------------------- - -**Transfer Results**: USB transfers can complete with different results. An **ACK** indicates a successful transfer, while a **NAK** signals that the device is not ready (commonly used for flow control). A **STALL** response indicates an error condition or unsupported request, and **Timeout** occurs when a transfer fails to complete within the expected time frame. - -**Flow Control in USB**: Unlike network protocols, USB doesn't use traditional congestion control. Instead, devices use NAK responses when not ready to receive data, applications implement buffering and proper timing strategies, and some classes (like CDC) support hardware flow control mechanisms such as RTS/CTS. - -**TinyUSB Handling**: Transfer results are represented as ``xfer_result_t`` enum values. The stack automatically handles NAK responses and timing. STALL conditions indicate application-level errors that should be addressed in class drivers. - -USB Device States -================= - -A USB device progresses through several states: - -1. **Attached**: Device is physically connected -2. **Powered**: Device receives power from host -3. **Default**: Device responds to address 0 -4. **Address**: Device has been assigned a unique address -5. **Configured**: Device is ready for normal operation -6. **Suspended**: Device is in low-power state - -**TinyUSB State Management**: State transitions are handled automatically by ``src/device/usbd.c``. You can implement ``tud_mount_cb()`` and ``tud_umount_cb()`` to respond to configuration changes, and ``tud_suspend_cb()``/``tud_resume_cb()`` for power management. - -Device Enumeration Process -========================== - -When a device is connected, the host follows this process: - -1. **Detection**: Host detects device connection -2. **Reset**: Host resets the device -3. **Descriptor Requests**: Host requests device descriptors -4. **Address Assignment**: Host assigns unique address to device -5. **Configuration**: Host selects and configures device -6. **Class Loading**: Host loads appropriate drivers -7. **Normal Operation**: Device is ready for use - -**TinyUSB Role**: The device stack handles steps 1-6 automatically; your application handles step 7. - -USB Descriptors -=============== - -Descriptors are data structures that describe device capabilities: - -Device Descriptor ------------------ -Describes the device (VID, PID, USB version, etc.) - -Configuration Descriptor ------------------------- -Describes device configuration (power requirements, interfaces, etc.) - -Interface Descriptor --------------------- -Describes a functional interface (class, endpoints, etc.) - -Endpoint Descriptor -------------------- -Describes endpoint characteristics (type, direction, size, etc.) - -String Descriptors ------------------- -Human-readable strings (manufacturer, product name, etc.) - -**TinyUSB Implementation**: You provide descriptors in ``usb_descriptors.c`` via callback functions: -- ``tud_descriptor_device_cb()`` - Device descriptor -- ``tud_descriptor_configuration_cb()`` - Configuration descriptor -- ``tud_descriptor_string_cb()`` - String descriptors - -The stack automatically handles descriptor requests during enumeration. See examples in ``examples/device/*/usb_descriptors.c`` for reference implementations. - -USB Classes -=========== - -USB classes define standardized protocols for device types: - -**Class Code**: Identifies the device type in descriptors -**Class Driver**: Software that implements the class protocol -**Class Requests**: Standardized commands for the class - -**Common TinyUSB-Supported Classes**: -- **CDC (02h)**: Communication devices (virtual serial ports) - Enable with ``CFG_TUD_CDC`` -- **HID (03h)**: Human interface devices (keyboards, mice) - Enable with ``CFG_TUD_HID`` -- **MSC (08h)**: Mass storage devices (USB drives) - Enable with ``CFG_TUD_MSC`` -- **Audio (01h)**: Audio devices (speakers, microphones) - Enable with ``CFG_TUD_AUDIO`` -- **MIDI**: MIDI devices - Enable with ``CFG_TUD_MIDI`` -- **DFU**: Device Firmware Update - Enable with ``CFG_TUD_DFU`` -- **Vendor**: Custom vendor classes - Enable with ``CFG_TUD_VENDOR`` - -See :doc:`../reference/usb_classes` for detailed class information and :doc:`../reference/configuration` for configuration options. - -USB Speeds -========== - -USB supports multiple speed modes: - -**Low Speed (1.5 Mbps)**: -- Simple devices (mice, keyboards) -- Limited endpoint types and sizes - -**Full Speed (12 Mbps)**: -- Most common for embedded devices -- All transfer types supported -- Maximum packet sizes: Control (64), Bulk (64), Interrupt (64) - -**High Speed (480 Mbps)**: -- High-performance devices -- Larger packet sizes: Control (64), Bulk (512), Interrupt (1024) -- Requires more complex hardware - -**Super Speed (5 Gbps)**: -- USB 3.0 and later -- Not supported by TinyUSB - -**TinyUSB Speed Support**: Most TinyUSB ports support Full Speed and High Speed. Speed is typically auto-detected by hardware. Configure speed requirements in board configuration (``hw/bsp/FAMILY/boards/BOARD/board.mk``) and ensure your MCU supports the desired speed. - -USB Controller Abstraction -=========================== - -USB controllers are hardware peripherals that handle the low-level USB protocol implementation. Understanding how they work helps explain TinyUSB's architecture and portability. - -Controller Fundamentals ------------------------ - -**What Controllers Do**: -- Handle USB signaling and protocol timing -- Manage endpoint buffers and data transfers -- Generate interrupts for USB events -- Implement USB electrical specifications - -**Key Components**: USB controllers consist of several key components working together. The **Physical Layer** provides USB signal drivers and receivers for electrical interfacing. The **Protocol Engine** handles USB packets and ACK/NAK responses according to the USB specification. **Endpoint Buffers** provide hardware FIFOs or RAM for data storage during transfers. Finally, the **Interrupt Controller** generates events for software processing when USB activities occur. - -Controller Architecture Types ------------------------------ - -Different MCU vendors implement USB controllers with varying architectures. -To list a few common patterns: - -**FIFO-Based Controllers** (e.g., STM32 OTG, NXP LPC): -- Shared or dedicated FIFOs for endpoint data -- Software manages FIFO allocation and data flow -- Common in higher-end MCUs with flexible configurations - -**Buffer-Based Controllers** (e.g., STM32 FSDEV, Microchip SAMD, RP2040): -- Fixed packet memory areas for each endpoint -- Hardware automatically handles packet placement -- Simpler programming model, common in smaller MCUs - -**Descriptor-Based Controllers** (e.g., NXP EHCI-style): -- Use descriptor chains to describe transfers -- Hardware processes transfer descriptors independently -- More complex but can handle larger transfers autonomously - -TinyUSB Controller Abstraction ------------------------------- - -TinyUSB abstracts controller differences through the TinyUSB **Device Controller Driver (DCD)** layer. -These internal details don't matter to users of TinyUSB typically; however, when debugging, knowledge about internal details helps sometimes. - -**Portable Interface** (``src/device/usbd.h``): -- Standardized function signatures for all controllers -- Common endpoint and transfer management APIs -- Unified interrupt and event handling - -**Controller-Specific Drivers** (``src/portable/VENDOR/FAMILY/``): -- Implement the DCD interface for specific hardware -- Handle vendor-specific register layouts and behaviors -- Manage controller-specific quirks and workarounds - -**Common DCD Functions**: -- ``dcd_init()`` - Initialize controller hardware -- ``dcd_edpt_open()`` - Configure endpoint with type and size -- ``dcd_edpt_xfer()`` - Start data transfer on endpoint -- ``dcd_int_handler()`` - Process USB interrupts -- ``dcd_connect()/dcd_disconnect()`` - Control USB bus connection - -Host Controller Driver (HCD) ------------------------------ - -TinyUSB also abstracts USB host controllers through the **Host Controller Driver (HCD)** layer for host mode applications. - -**Portable Interface** (``src/host/usbh.h``): -- Standardized interface for all host controllers -- Common device enumeration and pipe management -- Unified transfer scheduling and completion handling - -**Common HCD Functions**: -- ``hcd_init()`` - Initialize host controller hardware -- ``hcd_port_connect_status()`` - Check device connection status -- ``hcd_port_reset()`` - Reset connected device -- ``hcd_edpt_open()`` - Open communication pipe to device endpoint -- ``hcd_edpt_xfer()`` - Transfer data to/from connected device - -**Host vs Device Architecture**: While DCD is reactive (responds to host requests), HCD is active (initiates all communication). Host controllers manage device enumeration, driver loading, and transfer scheduling to multiple connected devices. - -TinyUSB Event System & Thread Safety -==================================== - -Deferred Interrupt Processing ------------------------------ - -**Core Architectural Principle**: TinyUSB uses a deferred interrupt processing model where all USB hardware events are captured in interrupt service routines (ISRs) but processed later in non-interrupt context. - -**Event Flow**: - -1. **Hardware Event**: USB controller generates interrupt (e.g., data received, transfer complete) -2. **ISR Handling**: TinyUSB ISR captures the event and pushes it to a central event queue -3. **Deferred Processing**: Application calls ``tud_task()`` or ``tuh_task()`` to process queued events -4. **Class Driver Callbacks**: Events trigger appropriate class driver functions and user callbacks - -**Buffer Integration**: The deferred processing model works seamlessly with TinyUSB's buffer/FIFO design. Since callbacks run in task context (not ISR), it's safe and straightforward to enqueue TX data directly in RX callbacks - for example, processing incoming CDC data and immediately sending a response. - -Controller Event Flow ---------------------- - -**Typical USB Event Processing**: - -1. **Hardware Event**: USB controller detects bus activity (setup packet, data transfer, etc.) -2. **Interrupt Generation**: Controller generates interrupt to CPU -3. **ISR Processing**: ``dcd_int_handler()`` reads controller status -4. **Event Queuing**: Events are queued for later processing (thread safety) -5. **Task Processing**: ``tud_task()`` processes queued events -6. **Class Notification**: Appropriate class drivers handle the event -7. **Application Callback**: User code responds to the event - -USB Class Driver Architecture -============================== - -TinyUSB implements USB classes through a standardized driver pattern that provides consistent integration with the core stack while allowing class-specific functionality. - -Class Driver Pattern ---------------------- - -**Standardized Entry Points**: Each class driver implements these core functions: - -- ``*_init()`` - Initialize class driver state and buffers -- ``*_reset()`` - Reset to initial state on USB bus reset -- ``*_open()`` - Parse and configure interfaces during enumeration -- ``*_control_xfer_cb()`` - Handle class-specific control requests -- ``*_xfer_cb()`` - Handle transfer completion callbacks - -**Multi-Instance Support**: Classes support multiple instances using ``_n`` suffixed APIs: - -.. code-block:: c - - // Single instance (default instance 0) - tud_cdc_write(data, len); - - // Multiple instances - tud_cdc_n_write(0, data, len); // Instance 0 - tud_cdc_n_write(1, data, len); // Instance 1 - -**Integration with Core Stack**: Class drivers are automatically discovered and integrated through function pointers in driver tables. The core stack calls class drivers during enumeration, control requests, and data transfers without requiring explicit registration. - -Class Driver Types -------------------- - -TinyUSB classes have different architectural patterns based on their buffering capabilities and callback designs. - -Most classes like CDC, MIDI, and HID always use internal buffers for data management. These classes provide notification-only callbacks such as ``tud_cdc_rx_cb(uint8_t itf)`` that signal when data is available, requiring applications to use class-specific APIs like ``tud_cdc_read()`` and ``tud_cdc_write()`` to access the data. HID is slightly different in that it provides direct buffer access in some callbacks (``tud_hid_set_report_cb()`` receives buffer and size parameters), but it still maintains internal endpoint buffering that cannot be disabled. - -The **Vendor Class** is unique in that it supports both buffered and direct modes. When buffered, vendor class behaves like other classes with ``tud_vendor_read()`` and ``tud_vendor_write()`` APIs. However, when buffering is disabled by setting buffer size to 0, the vendor class provides direct buffer access through ``tud_vendor_rx_cb(itf, buffer, bufsize)`` callbacks, eliminating internal FIFO overhead and providing direct endpoint control. - -**Block-Oriented Classes** like MSC operate differently by handling large data blocks through callback interfaces. The application implements storage access functions such as ``tud_msc_read10_cb()`` and ``tud_msc_write10_cb()``, while the TinyUSB stack manages the USB protocol aspects and the application manages the underlying storage. - -Power Management -================ - -USB provides power to devices: - -**Bus-Powered**: Device draws power from USB bus (up to 500mA) -**Self-Powered**: Device has its own power source -**Suspend/Resume**: Devices must enter low-power mode when bus is idle - -**TinyUSB Power Management**: -- Implement ``tud_suspend_cb()`` and ``tud_resume_cb()`` for power management -- Configure power requirements in device descriptor (``bMaxPower`` field) -- Use ``tud_remote_wakeup()`` to wake the host from suspend (if supported) -- Enable remote wakeup with ``CFG_TUD_USBD_ENABLE_REMOTE_WAKEUP`` - -Next Steps -========== - -- Start with :doc:`../tutorials/getting_started` for basic setup -- Review :doc:`../reference/configuration` for configuration options -- Explore :doc:`../examples` for advanced use cases diff --git a/docs/faq.rst b/docs/faq.rst index 505833316..ade51a379 100644 --- a/docs/faq.rst +++ b/docs/faq.rst @@ -38,7 +38,7 @@ Run ``python tools/get_deps.py FAMILY`` where FAMILY is your MCU family (e.g., s **Q: Can I use my own build system instead of Make/CMake?** -Yes, just add all ``.c`` files from ``src/`` to your project and configure include paths. See :doc:`tutorials/getting_started` for details. +Yes, just add all ``.c`` files from ``src/`` to your project and configure include paths. See :doc:`getting_started` for details. **Q: Error: "tusb_config.h: No such file or directory"** diff --git a/docs/getting_started.rst b/docs/getting_started.rst new file mode 100644 index 000000000..5e8ebd040 --- /dev/null +++ b/docs/getting_started.rst @@ -0,0 +1,357 @@ +*************** +Getting Started +*************** + +This tutorial will guide you through setting up TinyUSB for your first project. We'll cover the basic integration steps and build your first example application. + +Add TinyUSB to your project +--------------------------- + +To incorporate TinyUSB into your project: + +* Copy this repository or add it as a git submodule to a subfolder in your project. For example, place it at ``your_project/tinyusb`` +* Add all the ``.c`` files in the ``tinyusb/src`` folder to your project +* Add ``your_project/tinyusb/src`` to your include path. Also ensure that your include path contains the configuration file ``tusb_config.h``. +* Ensure all required macros are properly defined in ``tusb_config.h``. The configuration file from the demo applications provides a good starting point, but you'll need to add additional macros such as ``CFG_TUSB_MCU`` and ``CFG_TUSB_OS``. These are typically passed by make/cmake to maintain unique configurations for different boards. +* If you're using the **device stack**, you need to implement all **tud descriptor** callbacks for the stack to work. +* Add a ``tusb_init(rhport, role)`` call to your reset initialization code. +* Call ``tusb_int_handler(rhport, in_isr)`` from your USB IRQ handler +* Implement all enabled classes' callbacks. +* If you're not using an RTOS, you must call the ``tud_task()``/``tuh_task()`` functions periodically. These task functions handle all callbacks and core functionality. + +.. note:: + TinyUSB uses consistent naming prefixes: ``tud_`` for device stack functions and ``tuh_`` for host stack functions. See the :doc:`../reference/glossary` for more details. + +.. code-block:: c + + int main(void) { + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + // tud descriptor omitted here + tusb_init(0, &dev_init); // initialize device stack on roothub port 0 + + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(1, &host_init); // initialize host stack on roothub port 1 + + while(1) { // the mainloop + your_application_code(); + tud_task(); // device task + tuh_task(); // host task + } + } + + void USB0_IRQHandler(void) { + tusb_int_handler(0, true); + } + + void USB1_IRQHandler(void) { + tusb_int_handler(1, true); + } + +Examples +-------- + +For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API should be used. Most examples will work on most of :doc:`the supported boards `. Firstly we need to ``git clone`` if not already + +.. code-block:: bash + + $ git clone https://github.com/hathach/tinyusb tinyusb + $ cd tinyusb + +Some ports require additional port-specific SDKs (e.g., for RP2040) or binaries (e.g., for Sony Spresense) to build examples. These components are outside the scope of TinyUSB, so you should download and install them first according to the manufacturer's documentation. + +Dependencies +^^^^^^^^^^^^ + +TinyUSB separates example applications from board-specific hardware configurations (Board Support Packages, BSP). Example applications live in ``examples/device``, ``examples/host``, and ``examples/dual`` directories, while BSP configurations are stored in ``hw/bsp/FAMILY/boards/BOARD_NAME``. The BSP provides hardware abstraction including pin mappings, clock settings, linker scripts, and hardware initialization routines. For example, raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. When you build an example with ``BOARD=raspberry_pi_pico``, the build system automatically finds and uses the corresponding BSP. + +Before building, you must first download dependencies including MCU low-level peripheral drivers and external libraries such as FreeRTOS (required by some examples). You can do this in either of two ways: + +1. Run the ``tools/get_deps.py {FAMILY}`` script to download all dependencies for a specific MCU family. To download dependencies for all families, use ``FAMILY=all``. + +.. code-block:: bash + + $ python tools/get_deps.py rp2040 + +2. Or run the ``get-deps`` target in one of the example folders as follows. + +.. code-block:: bash + + $ cd examples/device/cdc_msc + $ make BOARD=feather_nrf52840_express get-deps + +You only need to do this once per family. Check out :doc:`complete list of dependencies and their designated path here ` + +Build Examples +^^^^^^^^^^^^^^ + +Examples support both Make and CMake build systems for most MCUs. However, some MCU families (such as Espressif and RP2040) only support CMake. First change directory to an example folder. + +.. code-block:: bash + + $ cd examples/device/cdc_msc + +Then compile with make or cmake + +.. code-block:: bash + + $ # make + $ make BOARD=feather_nrf52840_express all + + $ # cmake + $ mkdir build && cd build + $ cmake -DBOARD=raspberry_pi_pico .. + $ make + +To list all available targets with cmake + +.. code-block:: bash + + $ cmake --build . --target help + +Note: Some examples, especially those that use Vendor class (e.g., webUSB), may require udev permissions on Linux (and/or macOS) to access USB devices. It depends on your OS distribution, but typically copying ``99-tinyusb.rules`` and reloading udev is sufficient + +.. code-block:: bash + + $ cp examples/device/99-tinyusb.rules /etc/udev/rules.d/ + $ sudo udevadm control --reload-rules && sudo udevadm trigger + +RootHub Port Selection +~~~~~~~~~~~~~~~~~~~~~~ + +If a board has several ports, one port is chosen by default in the individual board.mk file. Use option ``RHPORT_DEVICE=x`` or ``RHPORT_HOST=x`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: + +.. code-block:: bash + + $ make BOARD=stm32f746disco RHPORT_DEVICE=1 all + + $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE=1 .. + +Port Speed +~~~~~~~~~~ + +An MCU can support multiple operational speeds. By default, the example build system uses the fastest speed supported by the board. Use the option ``RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED/OPT_MODE_HIGH_SPEED`` or ``RHPORT_HOST_SPEED=OPT_MODE_FULL_SPEED/OPT_MODE_HIGH_SPEED``. For example, to force the F723 to operate at full speed instead of the default high speed: + +.. code-block:: bash + + $ make BOARD=stm32f746disco RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED all + + $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED .. + +Size Analysis +~~~~~~~~~~~~~ + +First install `linkermap tool `_ then ``linkermap`` target can be used to analyze code size. You may want to compile with ``NO_LTO=1`` since ``-flto`` merges code across ``.o`` files and make it difficult to analyze. + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express NO_LTO=1 all linkermap + +Flashing the Device +^^^^^^^^^^^^^^^^^^^ + +The ``flash`` target uses the default on-board debugger (jlink/cmsisdap/stlink/dfu) to flash the binary. Please install the supporting software in advance. Some boards use bootloader/DFU via serial, which requires passing the serial port to the make command + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express flash + $ make SERIAL=/dev/ttyACM0 BOARD=feather_nrf52840_express flash + +Since jlink/openocd can be used with most of the boards, there is also ``flash-jlink/openocd`` (make) and ``EXAMPLE-jlink/openocd`` target for your convenience. Note for stm32 board with stlink, you can use ``flash-stlink`` target as well. + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express flash-jlink + $ make BOARD=feather_nrf52840_express flash-openocd + + $ cmake --build . --target cdc_msc-jlink + $ cmake --build . --target cdc_msc-openocd + +Some boards use UF2 bootloader for drag-and-drop into a mass storage device. UF2 files can be generated with the ``uf2`` target + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express all uf2 + + $ cmake --build . --target cdc_msc-uf2 + +Debugging +^^^^^^^^^ + +To compile for debugging add ``DEBUG=1``\ , for example + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express DEBUG=1 all + + $ cmake -DBOARD=feather_nrf52840_express -DCMAKE_BUILD_TYPE=Debug .. + +Enable Logging +~~~~~~~~~~~~~~ + +If you encounter issues running examples or need to submit a bug report, you can enable TinyUSB's built-in debug logging with the optional ``LOG=`` parameter. ``LOG=1`` prints only error messages, while ``LOG=2`` prints more detailed information about ongoing events. ``LOG=3`` or higher is not used yet. + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express LOG=2 all + + $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 .. + +Logging Performance Impact +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +By default, log messages are printed via the on-board UART, which is slow and consumes significant CPU time compared to USB speeds. If your board supports an on-board or external debugger, it would be more efficient to use it for logging. There are 2 protocols: + + +* `LOGGER=rtt`: use `Segger RTT protocol `_ + + * Cons: requires jlink as the debugger. + * Pros: work with most if not all MCUs + * Software viewer is JLink RTT Viewer/Client/Logger which is bundled with JLink driver package. + +* ``LOGGER=swo``\ : Use dedicated SWO pin of ARM Cortex SWD debug header. + + * Cons: Only works with ARM Cortex MCUs except M0 + * Pros: should be compatible with more debugger that support SWO. + * Software viewer should be provided along with your debugger driver. + +.. code-block:: bash + + $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=rtt all + $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=swo all + + $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=rtt .. + $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=swo .. + +IAR Support +^^^^^^^^^^^ + +IAR Embedded Workbench is a commercial IDE and toolchain for embedded development. TinyUSB provides integration support for IAR through project connection files and native CMake support. + +Use project connection +~~~~~~~~~~~~~~~~~~~~~~ + +IAR Project Connection files are provided to import TinyUSB stack into your project. + +* A buildable project for your MCU needs to be created in advance. + + * Take example of STM32F0: + + - You need ``stm32f0xx.h``, ``startup_stm32f0xx.s``, and ``system_stm32f0xx.c``. + + - ``STM32F0xx_HAL_Driver`` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. + +* Open ``Tools -> Configure Custom Argument Variables`` (Switch to ``Global`` tab if you want to do it for all your projects) + Click ``New Group ...``, name it to ``TUSB``, Click ``Add Variable ...``, name it to ``TUSB_DIR``, change it's value to the path of your TinyUSB stack, + for example ``C:\\tinyusb`` + +**Import stack only** + +Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\tools\\iar_template.ipcf``. + +**Run examples** + +1. Run ``iar_gen.py`` to generate .ipcf files of examples: + + .. code-block:: + + > cd C:\tinyusb\tools + > python iar_gen.py + +2. Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\examples\\(.ipcf of example)``. + For example ``C:\\tinyusb\\examples\\device\\cdc_msc\\iar_cdc_msc.ipcf`` + +Native CMake support +~~~~~~~~~~~~~~~~~~~~ + +With 9.50.1 release, IAR added experimental native CMake support (strangely not mentioned in public release note). Now it's possible to import CMakeLists.txt then build and debug as a normal project. + +Following these steps: + +1. Add IAR compiler binary path to system ``PATH`` environment variable, such as ``C:\Program Files\IAR Systems\Embedded Workbench 9.2\arm\bin``. +2. Create new project in IAR, in Tool chain dropdown menu, choose CMake for Arm then Import ``CMakeLists.txt`` from chosen example directory. +3. Set up board option in ``Option - CMake/CMSIS-TOOLBOX - CMake``, for example ``-DBOARD=stm32f439nucleo -DTOOLCHAIN=iar``, **Uncheck 'Override tools in env'**. +4. (For debug only) Choose correct CPU model in ``Option - General Options - Target``, to profit register and memory view. + +Common Issues and Solutions +--------------------------- + +**Build Errors** + +* **"arm-none-eabi-gcc: command not found"**: Install ARM GCC toolchain: ``sudo apt-get install gcc-arm-none-eabi`` +* **"Board 'X' not found"**: Check the available boards in ``hw/bsp/FAMILY/boards/`` or run ``python tools/build.py -l`` +* **Missing dependencies**: Run ``python tools/get_deps.py FAMILY`` where FAMILY matches your board + +**Runtime Issues** + +* **Device not recognized**: Check USB descriptors implementation and ``tusb_config.h`` settings +* **Enumeration failure**: Enable logging with ``LOG=2`` and check for USB protocol errors +* **Hard faults/crashes**: Verify interrupt handler setup and stack size allocation + +Quick Start Examples +-------------------- + +Now that you have TinyUSB set up, you can try these examples to see it in action. + +Simple Device Example +^^^^^^^^^^^^^^^^^^^^^ + +The ``cdc_msc`` example creates a USB device with both a virtual serial port (CDC) and mass storage (MSC). This is the most commonly used example and demonstrates core device functionality. + +**What it does:** +* Appears as a serial port that echoes back any text you send +* Appears as a small USB drive with a README.TXT file +* Blinks an LED to show activity + +**Build and run:** + +.. code-block:: bash + + $ cd examples/device/cdc_msc + $ make BOARD=stm32f407disco all + $ make BOARD=stm32f407disco flash + +**Key files:** +* ``src/main.c`` - Main application with ``tud_task()`` loop +* ``src/usb_descriptors.c`` - USB device descriptors +* ``src/msc_disk.c`` - Mass storage implementation + +**Expected behavior:** Connect to your computer and you'll see both a new serial port and a small USB drive appear. + +Simple Host Example +^^^^^^^^^^^^^^^^^^^ + +The ``cdc_msc_hid`` example creates a USB host that can connect to USB devices with CDC, MSC, or HID interfaces. + +**What it does:** +* Detects and enumerates connected USB devices +* Communicates with CDC devices (like USB-to-serial adapters) +* Reads from MSC devices (like USB drives) +* Receives input from HID devices (like keyboards and mice) + +**Build and run:** + +.. code-block:: bash + + $ cd examples/host/cdc_msc_hid + $ make BOARD=stm32f407disco all + $ make BOARD=stm32f407disco flash + +**Key files:** +* ``src/main.c`` - Main application with ``tuh_task()`` loop +* ``src/cdc_app.c`` - CDC host functionality +* ``src/msc_app.c`` - Mass storage host functionality +* ``src/hid_app.c`` - HID host functionality + +**Expected behavior:** Connect USB devices to see enumeration messages and device-specific interactions in the serial output. + +Next Steps +^^^^^^^^^^ + +* Check :doc:`reference/boards` for board-specific information +* Explore more examples in ``examples/device/`` and ``examples/host/`` directories diff --git a/docs/index.rst b/docs/index.rst index 3a70f2471..ac10dbfd7 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -18,10 +18,8 @@ TinyUSB provides a complete USB stack implementation supporting both device and **Quick Navigation:** -* New to TinyUSB? Start with :doc:`tutorials/getting_started` -* Need to solve a specific problem? Check :doc:`guides/index` -* Looking for API details? See :doc:`reference/index` -* Want to understand the design? Read :doc:`explanation/architecture` +* New to TinyUSB? Start with :doc:`getting_started` and :doc:`reference/glossary` +* Want to understand the design? Read :doc:`reference/architecture` and :doc:`reference/usb_concepts` * Having issues? Check :doc:`faq` and :doc:`troubleshooting` Documentation Structure @@ -31,12 +29,10 @@ Documentation Structure :maxdepth: 2 :caption: Information - explanation/index - tutorials/index - guides/index - reference/index + getting_started faq troubleshooting + reference/index .. toctree:: :maxdepth: 1 diff --git a/docs/reference/architecture.rst b/docs/reference/architecture.rst new file mode 100644 index 000000000..ab451a91a --- /dev/null +++ b/docs/reference/architecture.rst @@ -0,0 +1,291 @@ +************ +Architecture +************ + +This document explains TinyUSB's internal architecture, design principles, and how different components work together. + +Design Principles +================= + +Memory Safety +------------- + +TinyUSB is designed for resource-constrained embedded systems with strict memory requirements: + +TinyUSB uses **no dynamic allocation** - all memory is statically allocated at compile time for predictability. All buffers have bounded, compile-time defined sizes to prevent overflow issues. The TinyUSB core avoids heap allocation, resulting in **predictable memory usage** where consumption is fully deterministic. + +Thread Safety +------------- + +TinyUSB achieves thread safety through a deferred interrupt model: + +- **ISR deferral**: USB interrupts are captured and deferred to task context +- **Single-threaded processing**: All USB protocol handling occurs in task context +- **Queue-based design**: Events are queued from ISR and processed in ``tud_task()`` +- **RTOS integration**: Proper semaphore/mutex usage for shared resources + +Portability +----------- + +The stack is designed to work across diverse microcontroller families: + +- **Hardware abstraction**: MCU-specific code isolated in portable drivers +- **OS abstraction**: RTOS dependencies isolated in OSAL layer +- **Modular design**: Features can be enabled/disabled at compile time +- **Standard compliance**: Strict adherence to USB specifications + +Core Architecture +================= + +Layer Structure +--------------- + +TinyUSB follows a layered architecture from hardware to application: + +.. code-block:: none + + ┌─────────────────────────────────────────┐ + │ Application Layer │ ← Your code + ├─────────────────────────────────────────┤ + │ USB Class Drivers │ ← CDC, HID, MSC, etc. + ├─────────────────────────────────────────┤ + │ Device/Host Stack Core │ ← USB protocol handling + ├─────────────────────────────────────────┤ + │ Hardware Abstraction (DCD/HCD) │ ← MCU-specific drivers + ├─────────────────────────────────────────┤ + │ OS Abstraction (OSAL) │ ← RTOS integration + ├─────────────────────────────────────────┤ + │ Common Utilities & FIFO │ ← Shared components + └─────────────────────────────────────────┘ + +Component Overview +------------------ + +**Application Layer**: Your main application code that uses TinyUSB APIs. + +**Class Drivers**: Implement specific USB device classes (CDC, HID, MSC, etc.) and handle class-specific requests. + +**Device/Host Core**: Implements USB protocol state machines, endpoint management, and core USB functionality. + +**Hardware Abstraction**: MCU-specific code that interfaces with USB peripheral hardware. + +**OS Abstraction**: Provides threading primitives and synchronization for different RTOS environments. + +**Common Utilities**: Shared code including FIFO implementations, binary helpers, and utility functions. + +Device Stack Architecture +========================= + +This section is concerned with the **Device Stack**, i.e., the component of TinyUSB used in USB devices (that talk to a USB host). + +Core Components +--------------- + +**Device Controller Driver (DCD)**: +- MCU-specific USB device peripheral driver +- Handles endpoint configuration and data transfers +- Abstracts hardware differences between MCU families +- Located in ``src/portable/VENDOR/FAMILY/`` + +**USB Device Core (USBD)**: +- Implements USB device state machine +- Handles standard USB requests (Chapter 9) +- Manages device configuration and enumeration +- Located in ``src/device/`` + +**Class Drivers**: +- Implement USB class specifications +- Handle class-specific requests and data transfer +- Provide application APIs +- Located in ``src/class/*/`` + +Data Flow +--------- + +**Control Transfers (Setup Requests)**: + +.. code-block:: none + + USB Bus → DCD → USBD Core → Class Driver → Application + ↓ + Standard requests handled in core + ↓ + Class-specific requests → Class Driver + +**Data Transfers**: + +.. code-block:: none + + Application → Class Driver → USBD Core → DCD → USB Bus + USB Bus → DCD → USBD Core → Class Driver → Application + +Event Processing +---------------- + +TinyUSB uses a deferred interrupt model for thread safety: + +1. **Interrupt Occurs**: USB hardware generates interrupt +2. **ISR Handler**: ``dcd_int_handler()`` captures event, minimal processing +3. **Event Queuing**: Events queued for later processing +4. **Task Processing**: ``tud_task()`` (called by application code) processes queued events +5. **Callback Execution**: Application callbacks executed in task context + +.. code-block:: none + + USB IRQ → ISR → Event Queue → tud_task() → Class Callbacks → Application + +Host Stack Architecture +======================= + +This section is concerned with the **Host Stack**, i.e., the component of TinyUSB used in USB hosts, managing connected USB devices. + +Core Components +--------------- + +**Host Controller Driver (HCD)**: +- MCU-specific USB host peripheral driver +- Manages USB pipes and data transfers +- Handles host controller hardware +- Located in ``src/portable/VENDOR/FAMILY/`` + +**USB Host Core (USBH)**: +- Implements USB host functionality +- Manages device enumeration and configuration +- Handles pipe management and scheduling +- Located in ``src/host/`` + +**Hub Driver**: +- Manages USB hub devices +- Handles port management and device detection +- Supports multi-level hub topologies +- Located in ``src/host/`` + +Device Enumeration +------------------ + +The host stack follows USB enumeration process: + +1. **Device Detection**: Hub or root hub detects device connection +2. **Reset and Address**: Reset device, assign unique address +3. **Descriptor Retrieval**: Get device, configuration, and class descriptors +4. **Driver Matching**: Find appropriate class driver for device +5. **Configuration**: Configure device and start communication +6. **Class Operation**: Normal class-specific communication + +.. code-block:: none + + Device Connect → Reset → Get Descriptors → Load Driver → Configure → Operate + +Class Architecture +================== + +Common Class Structure +---------------------- + +All USB classes follow a similar architecture: + +**Device Classes**: +- ``*_device.c``: Device-side implementation +- ``*_device.h``: Device API definitions +- Implement class-specific descriptors +- Handle class requests and data transfer + +**Host Classes**: +- ``*_host.c``: Host-side implementation +- ``*_host.h``: Host API definitions +- Manage connected devices of this class +- Provide application interface + +Class Driver Interface +---------------------- + +**Required Functions**: +- ``init()``: Initialize class driver +- ``reset()``: Reset class state +- ``open()``: Configure class endpoints +- ``control_xfer_cb()``: Handle control requests +- ``xfer_cb()``: Handle data transfer completion + +**Optional Functions**: +- ``close()``: Clean up class resources +- ``sof_cb()``: Start-of-frame processing + +Descriptor Management +--------------------- + +Each class is responsible for: +- **Interface Descriptors**: Define class type and endpoints +- **Class-Specific Descriptors**: Additional class requirements +- **Endpoint Descriptors**: Define data transfer characteristics + +Memory Management +================= + +Static Allocation Model +----------------------- + +TinyUSB uses only static memory allocation; it allocates fixed-size endpoint buffers for each configured endpoint, static buffers for class-specific data handling, a fixed buffer dedicated to control transfers, and static event queues for deferred interrupt processing. + +Buffer Management +----------------- + +**Endpoint Buffers**: +- Allocated per endpoint at compile time +- Size defined by ``CFG_TUD_*_EP_BUFSIZE`` macros +- Used for USB data transfers + +**FIFO Buffers**: +- Ring buffers for streaming data +- Size defined by ``CFG_TUD_*_RX/TX_BUFSIZE`` macros +- Separate read/write pointers + +Threading Model +=============== + +Task-Based Design +----------------- + +TinyUSB uses a cooperative task model; it provides main tasks - ``tud_task()`` for device and ``tuh_task()`` for host operation. These tasks must be called regularly (typically less than 1ms intervals) to ensure all USB events are processed in task context, where application callbacks also execute. + +RTOS Integration +---------------- + +**Bare Metal**: +- Application calls ``tud_task()`` in main loop +- No threading primitives needed +- Simplest integration method + +**FreeRTOS**: +- USB task runs at high priority +- Semaphores used for synchronization +- Queue for inter-task communication + +**Other RTOS**: +- Similar patterns with RTOS-specific primitives +- OSAL layer abstracts RTOS differences + +Interrupt Handling +------------------ + +**Interrupt Service Routine**: +- Minimal processing in ISR +- Event capture and queuing only +- Quick return to avoid blocking + +**Deferred Processing**: +- All complex processing in task context +- Thread-safe access to data structures +- Application callbacks in known context + +Memory Usage Patterns +--------------------- + +**Flash Memory**: +- Core stack: 8-15KB depending on features +- Each class: 1-4KB additional +- Portable driver: 2-8KB depending on MCU + +**RAM Usage**: +- Core stack: 1-2KB +- Endpoint buffers: User configurable +- Class buffers: Depends on configuration diff --git a/docs/reference/configuration.rst b/docs/reference/configuration.rst deleted file mode 100644 index fa0a874f5..000000000 --- a/docs/reference/configuration.rst +++ /dev/null @@ -1,307 +0,0 @@ -************* -Configuration -************* - -TinyUSB behavior is controlled through compile-time configuration in ``tusb_config.h``. This reference covers all available configuration options. - -Basic Configuration -=================== - -Required Settings ------------------ - -.. code-block:: c - - // Target MCU family - REQUIRED - #define CFG_TUSB_MCU OPT_MCU_STM32F4 - - // OS abstraction layer - REQUIRED - #define CFG_TUSB_OS OPT_OS_NONE - - // Enable device or host stack - #define CFG_TUD_ENABLED 1 // Device stack - #define CFG_TUH_ENABLED 1 // Host stack - -Debug and Logging ------------------ - -.. code-block:: c - - // Debug level (0=off, 1=error, 2=warning, 3=info) - #define CFG_TUSB_DEBUG 2 - - // Memory alignment for buffers (usually 4) - #define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) - -Device Stack Configuration -========================== - -Endpoint Configuration ----------------------- - -.. code-block:: c - - // Control endpoint buffer size - #define CFG_TUD_ENDPOINT0_SIZE 64 - - // Number of endpoints (excluding EP0) - #define CFG_TUD_ENDPOINT_MAX 16 - -Device Classes --------------- - -**CDC (Communication Device Class)**: - -.. code-block:: c - - #define CFG_TUD_CDC 1 // Number of CDC interfaces - #define CFG_TUD_CDC_EP_BUFSIZE 512 // CDC endpoint buffer size - #define CFG_TUD_CDC_RX_BUFSIZE 256 // CDC RX FIFO size - #define CFG_TUD_CDC_TX_BUFSIZE 256 // CDC TX FIFO size - -**HID (Human Interface Device)**: - -.. code-block:: c - - #define CFG_TUD_HID 1 // Number of HID interfaces - #define CFG_TUD_HID_EP_BUFSIZE 16 // HID endpoint buffer size - -**MSC (Mass Storage Class)**: - -.. code-block:: c - - #define CFG_TUD_MSC 1 // Number of MSC interfaces - #define CFG_TUD_MSC_EP_BUFSIZE 512 // MSC endpoint buffer size - -**Audio Class**: - -.. code-block:: c - - #define CFG_TUD_AUDIO 1 // Number of audio interfaces - #define CFG_TUD_AUDIO_FUNC_1_DESC_LEN 220 - #define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 - #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 - #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 - #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 2 - -**MIDI**: - -.. code-block:: c - - #define CFG_TUD_MIDI 1 // Number of MIDI interfaces - #define CFG_TUD_MIDI_RX_BUFSIZE 128 // MIDI RX buffer size - #define CFG_TUD_MIDI_TX_BUFSIZE 128 // MIDI TX buffer size - -**DFU (Device Firmware Update)**: - -.. code-block:: c - - #define CFG_TUD_DFU 1 // Enable DFU mode - #define CFG_TUD_DFU_XFER_BUFSIZE 512 // DFU transfer buffer size - -**Vendor Class**: - -.. code-block:: c - - #define CFG_TUD_VENDOR 1 // Number of vendor interfaces - #define CFG_TUD_VENDOR_EPSIZE 64 // Vendor endpoint size - #define CFG_TUD_VENDOR_RX_BUFSIZE 64 // RX buffer size (0 = no buffering) - #define CFG_TUD_VENDOR_TX_BUFSIZE 64 // TX buffer size (0 = no buffering) - -.. note:: - Unlike other classes, vendor class supports setting buffer sizes to 0 to disable internal buffering. When disabled, data goes directly to ``tud_vendor_rx_cb()`` and the ``tud_vendor_read()``/``tud_vendor_write()`` functions are not available - applications must handle data directly in callbacks. - -Host Stack Configuration -======================== - -Port and Hub Configuration --------------------------- - -.. code-block:: c - - // Number of host root hub ports - #define CFG_TUH_HUB 1 - - // Number of connected devices (including hub) - #define CFG_TUH_DEVICE_MAX 5 - - // Control transfer buffer size - #define CFG_TUH_ENUMERATION_BUFSIZE 512 - -Host Classes ------------- - -**CDC Host**: - -.. code-block:: c - - #define CFG_TUH_CDC 2 // Number of CDC host instances - #define CFG_TUH_CDC_FTDI 1 // FTDI serial support - #define CFG_TUH_CDC_CP210X 1 // CP210x serial support - #define CFG_TUH_CDC_CH34X 1 // CH34x serial support - -**HID Host**: - -.. code-block:: c - - #define CFG_TUH_HID 4 // Number of HID instances - #define CFG_TUH_HID_EPIN_BUFSIZE 64 // HID endpoint buffer size - #define CFG_TUH_HID_EPOUT_BUFSIZE 64 - -**MSC Host**: - -.. code-block:: c - - #define CFG_TUH_MSC 1 // Number of MSC instances - #define CFG_TUH_MSC_MAXLUN 4 // Max LUNs per device - -Advanced Configuration -====================== - -Memory Management ------------------ - -.. code-block:: c - - // Enable stack protection - #define CFG_TUSB_DEBUG_PRINTF printf - - // Custom memory allocation (if needed) - #define CFG_TUSB_MEM_SECTION __attribute__((section(".usb_ram"))) - -RTOS Configuration ------------------- - -TinyUSB supports multiple operating systems through its OSAL (Operating System Abstraction Layer). Choose the appropriate configuration based on your target environment. - -**FreeRTOS Integration**: - -When using FreeRTOS, configure the task queue sizes to handle USB events efficiently: - -.. code-block:: c - - #define CFG_TUSB_OS OPT_OS_FREERTOS - #define CFG_TUD_TASK_QUEUE_SZ 16 // Device task queue size - #define CFG_TUH_TASK_QUEUE_SZ 16 // Host task queue size - -**RT-Thread Integration**: - -RT-Thread requires only the OS selection, as it uses the RTOS's built-in primitives: - -.. code-block:: c - - #define CFG_TUSB_OS OPT_OS_RTTHREAD - -Low Power Configuration ------------------------ - -.. code-block:: c - - // Enable remote wakeup - #define CFG_TUD_USBD_ENABLE_REMOTE_WAKEUP 1 - - // Suspend/resume callbacks - // Implement tud_suspend_cb() and tud_resume_cb() - -MCU-Specific Options -==================== - -The ``CFG_TUSB_MCU`` option selects the target microcontroller family: - -.. code-block:: c - - // STM32 families - #define CFG_TUSB_MCU OPT_MCU_STM32F0 - #define CFG_TUSB_MCU OPT_MCU_STM32F1 - #define CFG_TUSB_MCU OPT_MCU_STM32F4 - #define CFG_TUSB_MCU OPT_MCU_STM32F7 - #define CFG_TUSB_MCU OPT_MCU_STM32H7 - - // NXP families - #define CFG_TUSB_MCU OPT_MCU_LPC18XX - #define CFG_TUSB_MCU OPT_MCU_LPC40XX - #define CFG_TUSB_MCU OPT_MCU_LPC43XX - #define CFG_TUSB_MCU OPT_MCU_KINETIS_KL - #define CFG_TUSB_MCU OPT_MCU_IMXRT - - // Other vendors - #define CFG_TUSB_MCU OPT_MCU_RP2040 - #define CFG_TUSB_MCU OPT_MCU_ESP32S2 - #define CFG_TUSB_MCU OPT_MCU_ESP32S3 - #define CFG_TUSB_MCU OPT_MCU_SAMD21 - #define CFG_TUSB_MCU OPT_MCU_SAMD51 - #define CFG_TUSB_MCU OPT_MCU_NRF5X - -Configuration Examples -====================== - -Minimal Device (CDC only) --------------------------- - -.. code-block:: c - - #define CFG_TUSB_MCU OPT_MCU_STM32F4 - #define CFG_TUSB_OS OPT_OS_NONE - #define CFG_TUSB_DEBUG 0 - - #define CFG_TUD_ENABLED 1 - #define CFG_TUD_ENDPOINT0_SIZE 64 - - #define CFG_TUD_CDC 1 - #define CFG_TUD_CDC_EP_BUFSIZE 512 - #define CFG_TUD_CDC_RX_BUFSIZE 512 - #define CFG_TUD_CDC_TX_BUFSIZE 512 - - // Disable other classes - #define CFG_TUD_HID 0 - #define CFG_TUD_MSC 0 - #define CFG_TUD_MIDI 0 - #define CFG_TUD_AUDIO 0 - #define CFG_TUD_VENDOR 0 - -Full-Featured Host ------------------- - -.. code-block:: c - - #define CFG_TUSB_MCU OPT_MCU_STM32F4 - #define CFG_TUSB_OS OPT_OS_FREERTOS - #define CFG_TUSB_DEBUG 2 - - #define CFG_TUH_ENABLED 1 - #define CFG_TUH_HUB 1 - #define CFG_TUH_DEVICE_MAX 8 - #define CFG_TUH_ENUMERATION_BUFSIZE 512 - - #define CFG_TUH_CDC 2 - #define CFG_TUH_HID 4 - #define CFG_TUH_MSC 2 - #define CFG_TUH_VENDOR 2 - -Validation -========== - -Use these checks to validate your configuration: - -.. code-block:: c - - // In your main.c, add compile-time checks - #if !defined(CFG_TUSB_MCU) || (CFG_TUSB_MCU == OPT_MCU_NONE) - #error "CFG_TUSB_MCU must be defined" - #endif - - #if CFG_TUD_ENABLED && !defined(CFG_TUD_ENDPOINT0_SIZE) - #error "CFG_TUD_ENDPOINT0_SIZE must be defined for device stack" - #endif - -Common Configuration Issues -=========================== - -1. **Endpoint buffer size too small**: Causes transfer failures -2. **Missing CFG_TUSB_MCU**: Build will fail -3. **Incorrect OS setting**: RTOS functions won't work properly -4. **Insufficient endpoint count**: Device enumeration will fail -5. **Buffer size mismatches**: Data corruption or transfer failures - -For configuration examples specific to your board, check ``examples/device/*/tusb_config.h``. \ No newline at end of file diff --git a/docs/reference/index.rst b/docs/reference/index.rst index cb35dd1b9..d3c96eeee 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -7,9 +7,8 @@ Complete reference documentation for TinyUSB APIs, configuration, and supported .. toctree:: :maxdepth: 2 - api/index - configuration - usb_classes + architecture + usb_concepts boards dependencies concurrency diff --git a/docs/reference/usb_classes.rst b/docs/reference/usb_classes.rst deleted file mode 100644 index 387587b48..000000000 --- a/docs/reference/usb_classes.rst +++ /dev/null @@ -1,287 +0,0 @@ -*********** -USB Classes -*********** - -TinyUSB supports multiple USB device and host classes. This reference describes the features, capabilities, and requirements for each class. - -Device Classes -============== - -CDC (Communication Device Class) --------------------------------- - -Implements USB CDC specification for serial communication. - -**Supported Features:** -- CDC-ACM (Abstract Control Model) for virtual serial ports -- Data terminal ready (DTR) and request to send (RTS) control lines -- Line coding configuration (baud rate, parity, stop bits) -- Break signal support - -**Configuration:** -- ``CFG_TUD_CDC``: Number of CDC interfaces (1-4) -- ``CFG_TUD_CDC_EP_BUFSIZE``: Endpoint buffer size (typically 512) -- ``CFG_TUD_CDC_RX_BUFSIZE``: Receive FIFO size -- ``CFG_TUD_CDC_TX_BUFSIZE``: Transmit FIFO size - -**Key Functions:** -- ``tud_cdc_available()``: Check bytes available to read -- ``tud_cdc_read()``: Read data from host -- ``tud_cdc_write()``: Write data to host -- ``tud_cdc_write_flush()``: Flush transmit buffer - -**Callbacks:** -- ``tud_cdc_line_coding_cb()``: Line coding changed -- ``tud_cdc_line_state_cb()``: DTR/RTS state changed - -HID (Human Interface Device) ----------------------------- - -Implements USB HID specification for input devices. - -**Supported Features:** -- Boot protocol (keyboard/mouse) -- Report protocol with custom descriptors -- Input, output, and feature reports -- Multiple HID interfaces - -**Configuration:** -- ``CFG_TUD_HID``: Number of HID interfaces -- ``CFG_TUD_HID_EP_BUFSIZE``: Endpoint buffer size - -**Key Functions:** -- ``tud_hid_ready()``: Check if ready to send report -- ``tud_hid_report()``: Send HID report -- ``tud_hid_keyboard_report()``: Send keyboard report -- ``tud_hid_mouse_report()``: Send mouse report - -**Callbacks:** -- ``tud_hid_descriptor_report_cb()``: Provide report descriptor -- ``tud_hid_get_report_cb()``: Handle get report request -- ``tud_hid_set_report_cb()``: Handle set report request - -MSC (Mass Storage Class) ------------------------- - -Implements USB mass storage for file systems. - -**Supported Features:** -- SCSI transparent command set -- Multiple logical units (LUNs) -- Read/write operations -- Inquiry and capacity commands - -**Configuration:** -- ``CFG_TUD_MSC``: Number of MSC interfaces -- ``CFG_TUD_MSC_EP_BUFSIZE``: Endpoint buffer size - -**Key Functions:** -- Storage operations handled via callbacks - -**Required Callbacks:** -- ``tud_msc_inquiry_cb()``: Device inquiry information -- ``tud_msc_test_unit_ready_cb()``: Test if LUN is ready -- ``tud_msc_capacity_cb()``: Get LUN capacity -- ``tud_msc_start_stop_cb()``: Start/stop LUN -- ``tud_msc_read10_cb()``: Read data from LUN -- ``tud_msc_write10_cb()``: Write data to LUN - -Audio Class ------------ - -Implements USB Audio Class 2.0 specification. - -**Supported Features:** -- Audio streaming (input/output) -- Multiple sampling rates -- Volume and mute controls -- Feedback endpoints for asynchronous mode - -**Configuration:** -- ``CFG_TUD_AUDIO``: Number of audio functions -- Multiple configuration options for channels, sample rates, bit depth - -**Key Functions:** -- ``tud_audio_read()``: Read audio data -- ``tud_audio_write()``: Write audio data -- ``tud_audio_clear_ep_out_ff()``: Clear output FIFO - -MIDI ----- - -Implements USB MIDI specification. - -**Supported Features:** -- MIDI 1.0 message format -- Multiple virtual MIDI cables -- Standard MIDI messages - -**Configuration:** -- ``CFG_TUD_MIDI``: Number of MIDI interfaces -- ``CFG_TUD_MIDI_RX_BUFSIZE``: Receive buffer size -- ``CFG_TUD_MIDI_TX_BUFSIZE``: Transmit buffer size - -**Key Functions:** -- ``tud_midi_available()``: Check available MIDI messages -- ``tud_midi_read()``: Read MIDI packet -- ``tud_midi_write()``: Send MIDI packet - -DFU (Device Firmware Update) ----------------------------- - -Implements USB DFU specification for firmware updates. - -**Supported Modes:** -- DFU Mode: Device enters DFU for firmware update -- DFU Runtime: Request transition to DFU mode - -**Configuration:** -- ``CFG_TUD_DFU``: Enable DFU mode -- ``CFG_TUD_DFU_RUNTIME``: Enable DFU runtime - -**Key Functions:** -- Firmware update operations handled via callbacks - -**Required Callbacks:** -- ``tud_dfu_download_cb()``: Receive firmware data -- ``tud_dfu_manifest_cb()``: Complete firmware update - -Vendor Class ------------- - -Custom vendor-specific USB class implementation. - -**Features:** -- Configurable endpoints -- Custom protocol implementation -- WebUSB support -- Microsoft OS descriptors - -**Configuration:** -- ``CFG_TUD_VENDOR``: Number of vendor interfaces -- ``CFG_TUD_VENDOR_EPSIZE``: Endpoint size - -**Key Functions:** -- ``tud_vendor_available()``: Check available data -- ``tud_vendor_read()``: Read vendor data -- ``tud_vendor_write()``: Write vendor data - -Host Classes -============ - -CDC Host --------- - -Connect to CDC devices (virtual serial ports). - -**Supported Devices:** -- CDC-ACM devices -- FTDI USB-to-serial converters -- CP210x USB-to-serial converters -- CH34x USB-to-serial converters - -**Configuration:** -- ``CFG_TUH_CDC``: Number of CDC host instances -- ``CFG_TUH_CDC_FTDI``: Enable FTDI support -- ``CFG_TUH_CDC_CP210X``: Enable CP210x support - -**Key Functions:** -- ``tuh_cdc_available()``: Check available data -- ``tuh_cdc_read()``: Read from CDC device -- ``tuh_cdc_write()``: Write to CDC device -- ``tuh_cdc_set_baudrate()``: Configure serial settings - -HID Host --------- - -Connect to HID devices (keyboards, mice, etc.). - -**Supported Devices:** -- Boot keyboards and mice -- Generic HID devices with report descriptors -- Composite HID devices - -**Configuration:** -- ``CFG_TUH_HID``: Number of HID host instances -- ``CFG_TUH_HID_EPIN_BUFSIZE``: Input endpoint buffer size - -**Key Functions:** -- ``tuh_hid_receive_report()``: Start receiving reports -- ``tuh_hid_send_report()``: Send report to device -- ``tuh_hid_parse_report_descriptor()``: Parse HID descriptors - -MSC Host --------- - -Connect to mass storage devices (USB drives). - -**Supported Features:** -- SCSI transparent command set -- FAT file system support (with FatFS integration) -- Multiple LUNs per device - -**Configuration:** -- ``CFG_TUH_MSC``: Number of MSC host instances -- ``CFG_TUH_MSC_MAXLUN``: Maximum LUNs per device - -**Key Functions:** -- ``tuh_msc_ready()``: Check if device is ready -- ``tuh_msc_read10()``: Read sectors from device -- ``tuh_msc_write10()``: Write sectors to device - -Hub ---- - -Support for USB hubs to connect multiple devices. - -**Features:** -- Multi-level hub support -- Port power management -- Device connect/disconnect detection - -**Configuration:** -- ``CFG_TUH_HUB``: Number of hub instances -- ``CFG_TUH_DEVICE_MAX``: Total connected devices - -Class Implementation Guidelines -=============================== - -Descriptor Requirements ------------------------ - -Each USB class requires specific descriptors: - -1. **Interface Descriptor**: Defines the class type -2. **Endpoint Descriptors**: Define communication endpoints -3. **Class-Specific Descriptors**: Additional class requirements -4. **String Descriptors**: Human-readable device information - -Callback Implementation ------------------------ - -Most classes require callback functions: - -- **Mandatory callbacks**: Must be implemented for class to function -- **Optional callbacks**: Provide additional functionality -- **Event callbacks**: Called when specific events occur - -Performance Considerations --------------------------- - -When implementing USB classes, match **buffer sizes** to expected data rates to avoid bottlenecks. Choose appropriate **transfer types** based on your application's requirements. Keep **callback processing** lightweight for optimal performance. Avoid **memory allocations in critical paths** where possible to maintain consistent performance. - -Testing and Validation ----------------------- - -- **USB-IF Compliance**: Ensure descriptors meet USB standards -- **Host Compatibility**: Test with multiple operating systems -- **Performance Testing**: Verify transfer rates and latency -- **Error Handling**: Test disconnect/reconnect scenarios - -Class-Specific Resources -======================== - -- **USB-IF Specifications**: Official USB class specifications -- **Example Code**: Reference implementations in ``examples/`` directory -- **Test Applications**: Host-side test applications for validation -- **Debugging Tools**: USB protocol analyzers and debugging utilities \ No newline at end of file diff --git a/docs/reference/usb_concepts.rst b/docs/reference/usb_concepts.rst new file mode 100644 index 000000000..86ae97007 --- /dev/null +++ b/docs/reference/usb_concepts.rst @@ -0,0 +1,428 @@ +************ +USB Concepts +************ + +This document provides a brief introduction to USB protocol fundamentals that are essential for understanding TinyUSB development. + +TinyUSB API Naming Conventions +=============================== + +TinyUSB uses consistent function prefixes to organize its API: + +* **tusb_**: Core stack functions (initialization, interrupt handling) +* **tud_**: Device stack functions (e.g., ``tud_task()``, ``tud_cdc_write()``) +* **tuh_**: Host stack functions (e.g., ``tuh_task()``, ``tuh_cdc_receive()``) +* **tu_**: Internal utility functions (generally not used by applications) + +This naming makes it easy to identify which part of the stack a function belongs to and ensures there are no naming conflicts when using both device and host stacks together. + +USB Protocol Basics +==================== + +Universal Serial Bus (USB) is a standardized communication protocol designed for connecting devices to hosts (typically computers). Understanding these core concepts is essential for effective TinyUSB development. + +Host and Device Roles +---------------------- + +**USB Host**: The controlling side of a USB connection (typically a computer). The host: +- Initiates all communication +- Provides power to devices +- Manages the USB bus +- Enumerates and configures devices + +**TinyUSB Host Stack**: Enable with ``CFG_TUH_ENABLED=1`` in ``tusb_config.h``. Call ``tuh_task()`` regularly in your main loop. See the :doc:`../getting_started` Quick Start Examples for implementation details. + +**USB Device**: The peripheral side (keyboard, mouse, storage device, etc.). Devices: +- Respond to host requests +- Cannot initiate communication +- Receive power from the host +- Must be enumerated by the host before use + +**TinyUSB Device Stack**: Enable with ``CFG_TUD_ENABLED=1`` in ``tusb_config.h``. Call ``tud_task()`` regularly in your main loop. See the :doc:`../getting_started` Quick Start Examples for implementation details. + +**OTG (On-The-Go)**: Some devices can switch between host and device roles dynamically. **TinyUSB Support**: Both stacks can be enabled simultaneously on OTG-capable hardware. See ``examples/dual/`` for dual-role implementations. + +USB Transfers +============= + +Every USB transfer consists of the host issuing a request, and the device replying to that request. The host is the bus master and initiates all communication. +Devices cannot initiate sending data; for unsolicited incoming data, polling is used by the host. + +USB defines four transfer types, each intended for different use cases: + +Control Transfers +----------------- + +Used for device configuration and control commands. + +**Characteristics**: +- Bidirectional (uses both IN and OUT) +- Guaranteed delivery with error detection +- Limited data size (8-64 bytes per packet) +- All devices must support control transfers on endpoint 0 + +**Usage**: Device enumeration, configuration changes, class-specific commands + +**TinyUSB Context**: Handled automatically by the core stack for standard requests; class drivers handle class-specific requests. Endpoint 0 is managed by ``src/device/usbd.c`` and ``src/host/usbh.c``. Configure buffer size with ``CFG_TUD_ENDPOINT0_SIZE`` (typically 64 bytes). + +Bulk Transfers +-------------- + +Used for large amounts of data that don't require guaranteed timing. + +**Characteristics**: +- Unidirectional (separate IN and OUT endpoints) +- Guaranteed delivery with error detection +- Large packet sizes (up to 512 bytes for High Speed) +- Uses available bandwidth when no other transfers are active + +**Usage**: File transfers, large data communication, CDC serial data + +**TinyUSB Context**: Used by MSC (mass storage) and CDC classes for data transfer. Configure endpoint buffer sizes with ``CFG_TUD_MSC_EP_BUFSIZE`` and ``CFG_TUD_CDC_EP_BUFSIZE``. See ``src/class/msc/`` and ``src/class/cdc/`` for implementation details. + +Interrupt Transfers +------------------- + +Used for small, time-sensitive data with guaranteed maximum latency. + +**Characteristics**: +- Unidirectional (separate IN and OUT endpoints) +- Guaranteed delivery with error detection +- Small packet sizes (up to 64 bytes for Full Speed) +- Regular polling interval (1ms to 255ms) + +**Usage**: Keyboard/mouse input, sensor data, status updates + +**TinyUSB Context**: Used by HID class for input reports. Configure with ``CFG_TUD_HID`` and ``CFG_TUD_HID_EP_BUFSIZE``. Send reports using ``tud_hid_report()`` or ``tud_hid_keyboard_report()``. See ``src/class/hid/`` and HID examples in ``examples/device/hid_*/``. + +Isochronous Transfers +--------------------- + +Used for time-critical streaming data. + +**Characteristics**: +- Unidirectional (separate IN and OUT endpoints) +- No error correction (speed over reliability) +- Guaranteed bandwidth +- Real-time delivery + +**Usage**: Audio, video streaming + +**TinyUSB Context**: Used by Audio class for streaming audio data. Configure with ``CFG_TUD_AUDIO`` and related audio configuration macros. See ``src/class/audio/`` and audio examples in ``examples/device/audio_*/`` for UAC2 implementation. + +Endpoints and Addressing +========================= + +Endpoint Basics +--------------- + +**Endpoint**: A communication channel between host and device. + +- Each endpoint has a number (0-15) and direction +- Endpoint 0 is reserved for control transfers +- Other endpoints are assigned by device class requirements + +**TinyUSB Endpoint Management**: Configure maximum endpoints with ``CFG_TUD_ENDPOINT_MAX``. Endpoints are automatically allocated by enabled classes. See your board's ``usb_descriptors.c`` for endpoint assignments. + +**Direction**: +- **OUT**: Host to device (host sends data out) +- **IN**: Device to host (host reads data in) +- Note that in TinyUSB code, for ``tx``/``rx``, the device perspective is used typically: E.g., ``tud_cdc_tx_complete_cb()`` designates the callback executed once the device has completed sending data to the host (in device mode). + +**Addressing**: Endpoints are addressed as EPx IN/OUT (e.g., EP1 IN, EP2 OUT) + +Endpoint Configuration +---------------------- + +Each endpoint is configured with a specific **transfer type** (control, bulk, interrupt, or isochronous), a **direction** (IN, OUT, or bidirectional for control only), a **maximum packet size** that depends on USB speed and transfer type, and an **interval** for interrupt and isochronous endpoints. + +**TinyUSB Configuration**: Endpoint characteristics are defined in descriptors (``usb_descriptors.c``) and automatically configured by the stack. Buffer sizes are set via ``CFG_TUD_*_EP_BUFSIZE`` macros. + +Error Handling and Flow Control +------------------------------- + +**Transfer Results**: USB transfers can complete with different results. An **ACK** indicates a successful transfer, while a **NAK** signals that the device is not ready (commonly used for flow control). A **STALL** response indicates an error condition or unsupported request, and **Timeout** occurs when a transfer fails to complete within the expected time frame. + +**Flow Control in USB**: Unlike network protocols, USB doesn't use traditional congestion control. Instead, devices use NAK responses when not ready to receive data, applications implement buffering and proper timing strategies, and some classes (like CDC) support hardware flow control mechanisms such as RTS/CTS. + +**TinyUSB Handling**: Transfer results are represented as ``xfer_result_t`` enum values. The stack automatically handles NAK responses and timing. STALL conditions indicate application-level errors that should be addressed in class drivers. + +USB Device States +================= + +A USB device progresses through several states: + +1. **Attached**: Device is physically connected +2. **Powered**: Device receives power from host +3. **Default**: Device responds to address 0 +4. **Address**: Device has been assigned a unique address +5. **Configured**: Device is ready for normal operation +6. **Suspended**: Device is in low-power state + +**TinyUSB State Management**: State transitions are handled automatically by ``src/device/usbd.c``. You can implement ``tud_mount_cb()`` and ``tud_umount_cb()`` to respond to configuration changes, and ``tud_suspend_cb()``/``tud_resume_cb()`` for power management. + +Device Enumeration Process +========================== + +When a device is connected, the host follows this process: + +1. **Detection**: Host detects device connection +2. **Reset**: Host resets the device +3. **Descriptor Requests**: Host requests device descriptors +4. **Address Assignment**: Host assigns unique address to device +5. **Configuration**: Host selects and configures device +6. **Class Loading**: Host loads appropriate drivers +7. **Normal Operation**: Device is ready for use + +**TinyUSB Role**: The device stack handles steps 1-6 automatically; your application handles step 7. + +USB Descriptors +=============== + +Descriptors are data structures that describe device capabilities: + +Device Descriptor +----------------- +Describes the device (VID, PID, USB version, etc.) + +Configuration Descriptor +------------------------ +Describes device configuration (power requirements, interfaces, etc.) + +Interface Descriptor +-------------------- +Describes a functional interface (class, endpoints, etc.) + +Endpoint Descriptor +------------------- +Describes endpoint characteristics (type, direction, size, etc.) + +String Descriptors +------------------ +Human-readable strings (manufacturer, product name, etc.) + +**TinyUSB Implementation**: You provide descriptors in ``usb_descriptors.c`` via callback functions: +- ``tud_descriptor_device_cb()`` - Device descriptor +- ``tud_descriptor_configuration_cb()`` - Configuration descriptor +- ``tud_descriptor_string_cb()`` - String descriptors + +The stack automatically handles descriptor requests during enumeration. See examples in ``examples/device/*/usb_descriptors.c`` for reference implementations. + +USB Classes +=========== + +USB classes define standardized protocols for device types: + +**Class Code**: Identifies the device type in descriptors +**Class Driver**: Software that implements the class protocol +**Class Requests**: Standardized commands for the class + +**Common TinyUSB-Supported Classes**: +- **CDC (02h)**: Communication devices (virtual serial ports) - Enable with ``CFG_TUD_CDC`` +- **HID (03h)**: Human interface devices (keyboards, mice) - Enable with ``CFG_TUD_HID`` +- **MSC (08h)**: Mass storage devices (USB drives) - Enable with ``CFG_TUD_MSC`` +- **Audio (01h)**: Audio devices (speakers, microphones) - Enable with ``CFG_TUD_AUDIO`` +- **MIDI**: MIDI devices - Enable with ``CFG_TUD_MIDI`` +- **DFU**: Device Firmware Update - Enable with ``CFG_TUD_DFU`` +- **Vendor**: Custom vendor classes - Enable with ``CFG_TUD_VENDOR`` + +.. note:: + **Vendor Class Buffer Configuration**: Unlike other USB classes, the vendor class supports setting buffer sizes to 0 in ``tusb_config.h`` (``CFG_TUD_VENDOR_RX_BUFSIZE = 0``) to disable internal buffering. When disabled, data goes directly to ``tud_vendor_rx_cb()`` and the ``tud_vendor_read()``/``tud_vendor_write()`` functions are not available - applications must handle data directly in callbacks. + +See ``examples/device/*/tusb_config.h`` for configuration examples. + +USB Speeds +========== + +USB supports multiple speed modes: + +**Low Speed (1.5 Mbps)**: +- Simple devices (mice, keyboards) +- Limited endpoint types and sizes + +**Full Speed (12 Mbps)**: +- Most common for embedded devices +- All transfer types supported +- Maximum packet sizes: Control (64), Bulk (64), Interrupt (64) + +**High Speed (480 Mbps)**: +- High-performance devices +- Larger packet sizes: Control (64), Bulk (512), Interrupt (1024) +- Requires more complex hardware + +**Super Speed (5 Gbps)**: +- USB 3.0 and later +- Not supported by TinyUSB + +**TinyUSB Speed Support**: Most TinyUSB ports support Full Speed and High Speed. Speed is typically auto-detected by hardware. Configure speed requirements in board configuration (``hw/bsp/FAMILY/boards/BOARD/board.mk``) and ensure your MCU supports the desired speed. + +USB Controller Abstraction +=========================== + +USB controllers are hardware peripherals that handle the low-level USB protocol implementation. Understanding how they work helps explain TinyUSB's architecture and portability. + +Controller Fundamentals +----------------------- + +**What Controllers Do**: +- Handle USB signaling and protocol timing +- Manage endpoint buffers and data transfers +- Generate interrupts for USB events +- Implement USB electrical specifications + +**Key Components**: USB controllers consist of several key components working together. The **Physical Layer** provides USB signal drivers and receivers for electrical interfacing. The **Protocol Engine** handles USB packets and ACK/NAK responses according to the USB specification. **Endpoint Buffers** provide hardware FIFOs or RAM for data storage during transfers. Finally, the **Interrupt Controller** generates events for software processing when USB activities occur. + +Controller Architecture Types +----------------------------- + +Different MCU vendors implement USB controllers with varying architectures. +To list a few common patterns: + +**FIFO-Based Controllers** (e.g., STM32 OTG, NXP LPC): +- Shared or dedicated FIFOs for endpoint data +- Software manages FIFO allocation and data flow +- Common in higher-end MCUs with flexible configurations + +**Buffer-Based Controllers** (e.g., STM32 FSDEV, Microchip SAMD, RP2040): +- Fixed packet memory areas for each endpoint +- Hardware automatically handles packet placement +- Simpler programming model, common in smaller MCUs + +**Descriptor-Based Controllers** (e.g., NXP EHCI-style): +- Use descriptor chains to describe transfers +- Hardware processes transfer descriptors independently +- More complex but can handle larger transfers autonomously + +TinyUSB Controller Abstraction +------------------------------ + +TinyUSB abstracts controller differences through the TinyUSB **Device Controller Driver (DCD)** layer. +These internal details don't matter to users of TinyUSB typically; however, when debugging, knowledge about internal details helps sometimes. + +**Portable Interface** (``src/device/usbd.h``): +- Standardized function signatures for all controllers +- Common endpoint and transfer management APIs +- Unified interrupt and event handling + +**Controller-Specific Drivers** (``src/portable/VENDOR/FAMILY/``): +- Implement the DCD interface for specific hardware +- Handle vendor-specific register layouts and behaviors +- Manage controller-specific quirks and workarounds + +**Common DCD Functions**: +- ``dcd_init()`` - Initialize controller hardware +- ``dcd_edpt_open()`` - Configure endpoint with type and size +- ``dcd_edpt_xfer()`` - Start data transfer on endpoint +- ``dcd_int_handler()`` - Process USB interrupts +- ``dcd_connect()/dcd_disconnect()`` - Control USB bus connection + +Host Controller Driver (HCD) +----------------------------- + +TinyUSB also abstracts USB host controllers through the **Host Controller Driver (HCD)** layer for host mode applications. + +**Portable Interface** (``src/host/usbh.h``): +- Standardized interface for all host controllers +- Common device enumeration and pipe management +- Unified transfer scheduling and completion handling + +**Common HCD Functions**: +- ``hcd_init()`` - Initialize host controller hardware +- ``hcd_port_connect_status()`` - Check device connection status +- ``hcd_port_reset()`` - Reset connected device +- ``hcd_edpt_open()`` - Open communication pipe to device endpoint +- ``hcd_edpt_xfer()`` - Transfer data to/from connected device + +**Host vs Device Architecture**: While DCD is reactive (responds to host requests), HCD is active (initiates all communication). Host controllers manage device enumeration, driver loading, and transfer scheduling to multiple connected devices. + +TinyUSB Event System & Thread Safety +==================================== + +Deferred Interrupt Processing +----------------------------- + +**Core Architectural Principle**: TinyUSB uses a deferred interrupt processing model where all USB hardware events are captured in interrupt service routines (ISRs) but processed later in non-interrupt context. + +**Event Flow**: + +1. **Hardware Event**: USB controller generates interrupt (e.g., data received, transfer complete) +2. **ISR Handling**: TinyUSB ISR captures the event and pushes it to a central event queue +3. **Deferred Processing**: Application calls ``tud_task()`` or ``tuh_task()`` to process queued events +4. **Class Driver Callbacks**: Events trigger appropriate class driver functions and user callbacks + +**Buffer Integration**: The deferred processing model works seamlessly with TinyUSB's buffer/FIFO design. Since callbacks run in task context (not ISR), it's safe and straightforward to enqueue TX data directly in RX callbacks - for example, processing incoming CDC data and immediately sending a response. + +Controller Event Flow +--------------------- + +**Typical USB Event Processing**: + +1. **Hardware Event**: USB controller detects bus activity (setup packet, data transfer, etc.) +2. **Interrupt Generation**: Controller generates interrupt to CPU +3. **ISR Processing**: ``dcd_int_handler()`` reads controller status +4. **Event Queuing**: Events are queued for later processing (thread safety) +5. **Task Processing**: ``tud_task()`` processes queued events +6. **Class Notification**: Appropriate class drivers handle the event +7. **Application Callback**: User code responds to the event + +USB Class Driver Architecture +============================== + +TinyUSB implements USB classes through a standardized driver pattern that provides consistent integration with the core stack while allowing class-specific functionality. + +Class Driver Pattern +--------------------- + +**Standardized Entry Points**: Each class driver implements these core functions: + +- ``*_init()`` - Initialize class driver state and buffers +- ``*_reset()`` - Reset to initial state on USB bus reset +- ``*_open()`` - Parse and configure interfaces during enumeration +- ``*_control_xfer_cb()`` - Handle class-specific control requests +- ``*_xfer_cb()`` - Handle transfer completion callbacks + +**Multi-Instance Support**: Classes support multiple instances using ``_n`` suffixed APIs: + +.. code-block:: c + + // Single instance (default instance 0) + tud_cdc_write(data, len); + + // Multiple instances + tud_cdc_n_write(0, data, len); // Instance 0 + tud_cdc_n_write(1, data, len); // Instance 1 + +**Integration with Core Stack**: Class drivers are automatically discovered and integrated through function pointers in driver tables. The core stack calls class drivers during enumeration, control requests, and data transfers without requiring explicit registration. + +Class Driver Types +------------------- + +TinyUSB classes have different architectural patterns based on their buffering capabilities and callback designs. + +Most classes like CDC, MIDI, and HID always use internal buffers for data management. These classes provide notification-only callbacks such as ``tud_cdc_rx_cb(uint8_t itf)`` that signal when data is available, requiring applications to use class-specific APIs like ``tud_cdc_read()`` and ``tud_cdc_write()`` to access the data. HID is slightly different in that it provides direct buffer access in some callbacks (``tud_hid_set_report_cb()`` receives buffer and size parameters), but it still maintains internal endpoint buffering that cannot be disabled. + +The **Vendor Class** is unique in that it supports both buffered and direct modes. When buffered, vendor class behaves like other classes with ``tud_vendor_read()`` and ``tud_vendor_write()`` APIs. However, when buffering is disabled by setting buffer size to 0, the vendor class provides direct buffer access through ``tud_vendor_rx_cb(itf, buffer, bufsize)`` callbacks, eliminating internal FIFO overhead and providing direct endpoint control. + +**Block-Oriented Classes** like MSC operate differently by handling large data blocks through callback interfaces. The application implements storage access functions such as ``tud_msc_read10_cb()`` and ``tud_msc_write10_cb()``, while the TinyUSB stack manages the USB protocol aspects and the application manages the underlying storage. + +Power Management +================ + +USB provides power to devices: + +**Bus-Powered**: Device draws power from USB bus (up to 500mA) +**Self-Powered**: Device has its own power source +**Suspend/Resume**: Devices must enter low-power mode when bus is idle + +**TinyUSB Power Management**: +- Implement ``tud_suspend_cb()`` and ``tud_resume_cb()`` for power management +- Configure power requirements in device descriptor (``bMaxPower`` field) +- Use ``tud_remote_wakeup()`` to wake the host from suspend (if supported) +- Enable remote wakeup with ``CFG_TUD_USBD_ENABLE_REMOTE_WAKEUP`` + +Next Steps +========== + +- Start with :doc:`../getting_started` for basic setup +- Review ``examples/device/*/tusb_config.h`` for configuration examples +- Explore examples in ``examples/device/`` and ``examples/host/`` directories diff --git a/docs/tutorials/getting_started.rst b/docs/tutorials/getting_started.rst deleted file mode 100644 index 35a9aa9bf..000000000 --- a/docs/tutorials/getting_started.rst +++ /dev/null @@ -1,356 +0,0 @@ -*************** -Getting Started -*************** - -This tutorial will guide you through setting up TinyUSB for your first project. We'll cover the basic integration steps and build your first example application. - -Add TinyUSB to your project ---------------------------- - -To incorporate TinyUSB into your project: - -* Copy this repository or add it as a git submodule to a subfolder in your project. For example, place it at ``your_project/tinyusb`` -* Add all the ``.c`` files in the ``tinyusb/src`` folder to your project -* Add ``your_project/tinyusb/src`` to your include path. Also ensure that your include path contains the configuration file ``tusb_config.h``. -* Ensure all required macros are properly defined in ``tusb_config.h``. The configuration file from the demo applications provides a good starting point, but you'll need to add additional macros such as ``CFG_TUSB_MCU`` and ``CFG_TUSB_OS``. These are typically passed by make/cmake to maintain unique configurations for different boards. -* If you're using the device stack, ensure you have created or modified USB descriptors to meet your specific requirements. Ultimately you need to implement all **tud descriptor** callbacks for the stack to work. -* Add a ``tusb_init(rhport, role)`` call to your reset initialization code. -* Call ``tusb_int_handler(rhport, in_isr)`` from your USB IRQ handler -* Implement all enabled classes' callbacks. -* If you're not using an RTOS, you must call the ``tud_task()``/``tuh_task()`` functions continuously or periodically. These task functions handle all callbacks and core functionality. - -.. note:: - TinyUSB uses consistent naming prefixes: ``tud_`` for device stack functions and ``tuh_`` for host stack functions. See the :doc:`../reference/glossary` for more details. - -.. code-block:: c - - int main(void) { - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; - tusb_init(0, &dev_init); // initialize device stack on roothub port 0 - - tusb_rhport_init_t host_init = { - .role = TUSB_ROLE_HOST, - .speed = TUSB_SPEED_AUTO - }; - tusb_init(1, &host_init); // initialize host stack on roothub port 1 - - while(1) { // the mainloop - your_application_code(); - tud_task(); // device task - tuh_task(); // host task - } - } - - void USB0_IRQHandler(void) { - tusb_int_handler(0, true); - } - - void USB1_IRQHandler(void) { - tusb_int_handler(1, true); - } - -Examples --------- - -For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API should be used. Most examples will work on most of :doc:`the supported boards `. Firstly we need to ``git clone`` if not already - -.. code-block:: bash - - $ git clone https://github.com/hathach/tinyusb tinyusb - $ cd tinyusb - -Some ports require additional port-specific SDKs (e.g., for RP2040) or binaries (e.g., for Sony Spresense) to build examples. These components are outside the scope of TinyUSB, so you should download and install them first according to the manufacturer's documentation. - -Dependencies -^^^^^^^^^^^^ - -TinyUSB separates example applications from board-specific hardware configurations. Example applications live in ``examples/device``, ``examples/host``, and ``examples/dual`` directories, while Board Support Package (BSP) configurations are stored in ``hw/bsp/FAMILY/boards/BOARD_NAME``. The BSP provides hardware abstraction including pin mappings, clock settings, linker scripts, and hardware initialization routines. For example, raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. When you build an example with ``BOARD=raspberry_pi_pico``, the build system automatically finds and uses the corresponding BSP. - -Before building, you must first download dependencies including MCU low-level peripheral drivers and external libraries such as FreeRTOS (required by some examples). You can do this in either of two ways: - -1. Run the ``tools/get_deps.py {FAMILY}`` script to download all dependencies for a specific MCU family. To download dependencies for all families, use ``FAMILY=all``. - -.. code-block:: bash - - $ python tools/get_deps.py rp2040 - -2. Or run the ``get-deps`` target in one of the example folders as follows. - -.. code-block:: bash - - $ cd examples/device/cdc_msc - $ make BOARD=feather_nrf52840_express get-deps - -You only need to do this once per family. Check out :doc:`complete list of dependencies and their designated path here ` - -Build Examples -^^^^^^^^^^^^^^ - -Examples support both Make and CMake build systems for most MCUs. However, some MCU families (such as Espressif and RP2040) only support CMake. First change directory to an example folder. - -.. code-block:: bash - - $ cd examples/device/cdc_msc - -Then compile with make or cmake - -.. code-block:: bash - - $ # make - $ make BOARD=feather_nrf52840_express all - - $ # cmake - $ mkdir build && cd build - $ cmake -DBOARD=raspberry_pi_pico .. - $ make - -To list all available targets with cmake - -.. code-block:: bash - - $ cmake --build . --target help - -Note: Some examples, especially those that use Vendor class (e.g., webUSB), may require udev permissions on Linux (and/or macOS) to access USB devices. It depends on your OS distribution, but typically copying ``99-tinyusb.rules`` and reloading udev is sufficient - -.. code-block:: bash - - $ cp examples/device/99-tinyusb.rules /etc/udev/rules.d/ - $ sudo udevadm control --reload-rules && sudo udevadm trigger - -RootHub Port Selection -~~~~~~~~~~~~~~~~~~~~~~ - -If a board has several ports, one port is chosen by default in the individual board.mk file. Use option ``RHPORT_DEVICE=x`` or ``RHPORT_HOST=x`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: - -.. code-block:: bash - - $ make BOARD=stm32f746disco RHPORT_DEVICE=1 all - - $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE=1 .. - -Port Speed -~~~~~~~~~~ - -An MCU can support multiple operational speeds. By default, the example build system uses the fastest speed supported by the board. Use the option ``RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED/OPT_MODE_HIGH_SPEED`` or ``RHPORT_HOST_SPEED=OPT_MODE_FULL_SPEED/OPT_MODE_HIGH_SPEED``. For example, to force the F723 to operate at full speed instead of the default high speed: - -.. code-block:: bash - - $ make BOARD=stm32f746disco RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED all - - $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED .. - -Size Analysis -~~~~~~~~~~~~~ - -First install `linkermap tool `_ then ``linkermap`` target can be used to analyze code size. You may want to compile with ``NO_LTO=1`` since ``-flto`` merges code across ``.o`` files and make it difficult to analyze. - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express NO_LTO=1 all linkermap - -Flashing the Device -^^^^^^^^^^^^^^^^^^^ - -The ``flash`` target uses the default on-board debugger (jlink/cmsisdap/stlink/dfu) to flash the binary. Please install the supporting software in advance. Some boards use bootloader/DFU via serial, which requires passing the serial port to the make command - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express flash - $ make SERIAL=/dev/ttyACM0 BOARD=feather_nrf52840_express flash - -Since jlink/openocd can be used with most of the boards, there is also ``flash-jlink/openocd`` (make) and ``EXAMPLE-jlink/openocd`` target for your convenience. Note for stm32 board with stlink, you can use ``flash-stlink`` target as well. - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express flash-jlink - $ make BOARD=feather_nrf52840_express flash-openocd - - $ cmake --build . --target cdc_msc-jlink - $ cmake --build . --target cdc_msc-openocd - -Some boards use UF2 bootloader for drag-and-drop into a mass storage device. UF2 files can be generated with the ``uf2`` target - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express all uf2 - - $ cmake --build . --target cdc_msc-uf2 - -Debugging -^^^^^^^^^ - -To compile for debugging add ``DEBUG=1``\ , for example - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express DEBUG=1 all - - $ cmake -DBOARD=feather_nrf52840_express -DCMAKE_BUILD_TYPE=Debug .. - -Enable Logging -~~~~~~~~~~~~~~ - -If you encounter issues running examples or need to submit a bug report, you can enable TinyUSB's built-in debug logging with the optional ``LOG=`` parameter. ``LOG=1`` prints only error messages, while ``LOG=2`` prints more detailed information about ongoing events. ``LOG=3`` or higher is not used yet. - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express LOG=2 all - - $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 .. - -Logging Performance Impact -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -By default, log messages are printed via the on-board UART, which is slow and consumes significant CPU time compared to USB speeds. If your board supports an on-board or external debugger, it would be more efficient to use it for logging. There are 2 protocols: - - -* `LOGGER=rtt`: use `Segger RTT protocol `_ - - * Cons: requires jlink as the debugger. - * Pros: work with most if not all MCUs - * Software viewer is JLink RTT Viewer/Client/Logger which is bundled with JLink driver package. - -* ``LOGGER=swo``\ : Use dedicated SWO pin of ARM Cortex SWD debug header. - - * Cons: Only works with ARM Cortex MCUs except M0 - * Pros: should be compatible with more debugger that support SWO. - * Software viewer should be provided along with your debugger driver. - -.. code-block:: bash - - $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=rtt all - $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=swo all - - $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=rtt .. - $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=swo .. - -IAR Support -^^^^^^^^^^^ - -IAR Embedded Workbench is a commercial IDE and toolchain for embedded development. TinyUSB provides integration support for IAR through project connection files and native CMake support. - -Use project connection -~~~~~~~~~~~~~~~~~~~~~~ - -IAR Project Connection files are provided to import TinyUSB stack into your project. - -* A buildable project for your MCU needs to be created in advance. - - * Take example of STM32F0: - - - You need ``stm32f0xx.h``, ``startup_stm32f0xx.s``, and ``system_stm32f0xx.c``. - - - ``STM32F0xx_HAL_Driver`` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. - -* Open ``Tools -> Configure Custom Argument Variables`` (Switch to ``Global`` tab if you want to do it for all your projects) - Click ``New Group ...``, name it to ``TUSB``, Click ``Add Variable ...``, name it to ``TUSB_DIR``, change it's value to the path of your TinyUSB stack, - for example ``C:\\tinyusb`` - -**Import stack only** - -Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\tools\\iar_template.ipcf``. - -**Run examples** - -1. Run ``iar_gen.py`` to generate .ipcf files of examples: - - .. code-block:: - - > cd C:\tinyusb\tools - > python iar_gen.py - -2. Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\examples\\(.ipcf of example)``. - For example ``C:\\tinyusb\\examples\\device\\cdc_msc\\iar_cdc_msc.ipcf`` - -Native CMake support -~~~~~~~~~~~~~~~~~~~~ - -With 9.50.1 release, IAR added experimental native CMake support (strangely not mentioned in public release note). Now it's possible to import CMakeLists.txt then build and debug as a normal project. - -Following these steps: - -1. Add IAR compiler binary path to system ``PATH`` environment variable, such as ``C:\Program Files\IAR Systems\Embedded Workbench 9.2\arm\bin``. -2. Create new project in IAR, in Tool chain dropdown menu, choose CMake for Arm then Import ``CMakeLists.txt`` from chosen example directory. -3. Set up board option in ``Option - CMake/CMSIS-TOOLBOX - CMake``, for example ``-DBOARD=stm32f439nucleo -DTOOLCHAIN=iar``, **Uncheck 'Override tools in env'**. -4. (For debug only) Choose correct CPU model in ``Option - General Options - Target``, to profit register and memory view. - -Common Issues and Solutions ---------------------------- - -**Build Errors** - -* **"arm-none-eabi-gcc: command not found"**: Install ARM GCC toolchain: ``sudo apt-get install gcc-arm-none-eabi`` -* **"Board 'X' not found"**: Check the available boards in ``hw/bsp/FAMILY/boards/`` or run ``python tools/build.py -l`` -* **Missing dependencies**: Run ``python tools/get_deps.py FAMILY`` where FAMILY matches your board - -**Runtime Issues** - -* **Device not recognized**: Check USB descriptors implementation and ``tusb_config.h`` settings -* **Enumeration failure**: Enable logging with ``LOG=2`` and check for USB protocol errors -* **Hard faults/crashes**: Verify interrupt handler setup and stack size allocation - -Quick Start Examples --------------------- - -Now that you have TinyUSB set up, you can try these examples to see it in action. - -Simple Device Example -^^^^^^^^^^^^^^^^^^^^^ - -The ``cdc_msc`` example creates a USB device with both a virtual serial port (CDC) and mass storage (MSC). This is the most commonly used example and demonstrates core device functionality. - -**What it does:** -* Appears as a serial port that echoes back any text you send -* Appears as a small USB drive with a README.TXT file -* Blinks an LED to show activity - -**Build and run:** - -.. code-block:: bash - - $ cd examples/device/cdc_msc - $ make BOARD=stm32f407disco all - $ make BOARD=stm32f407disco flash - -**Key files:** -* ``src/main.c`` - Main application with ``tud_task()`` loop -* ``src/usb_descriptors.c`` - USB device descriptors -* ``src/msc_disk.c`` - Mass storage implementation - -**Expected behavior:** Connect to your computer and you'll see both a new serial port and a small USB drive appear. - -Simple Host Example -^^^^^^^^^^^^^^^^^^^ - -The ``cdc_msc_hid`` example creates a USB host that can connect to USB devices with CDC, MSC, or HID interfaces. - -**What it does:** -* Detects and enumerates connected USB devices -* Communicates with CDC devices (like USB-to-serial adapters) -* Reads from MSC devices (like USB drives) -* Receives input from HID devices (like keyboards and mice) - -**Build and run:** - -.. code-block:: bash - - $ cd examples/host/cdc_msc_hid - $ make BOARD=stm32f407disco all - $ make BOARD=stm32f407disco flash - -**Key files:** -* ``src/main.c`` - Main application with ``tuh_task()`` loop -* ``src/cdc_app.c`` - CDC host functionality -* ``src/msc_app.c`` - Mass storage host functionality -* ``src/hid_app.c`` - HID host functionality - -**Expected behavior:** Connect USB devices to see enumeration messages and device-specific interactions in the serial output. - -Next Steps -^^^^^^^^^^ - -* Check :doc:`../reference/boards` for board-specific information -* Explore more :doc:`../examples` for advanced use cases diff --git a/docs/tutorials/index.rst b/docs/tutorials/index.rst deleted file mode 100644 index dc362d717..000000000 --- a/docs/tutorials/index.rst +++ /dev/null @@ -1,10 +0,0 @@ -********* -Tutorials -********* - -Step-by-step learning guides for TinyUSB development. - -.. toctree:: - :maxdepth: 2 - - getting_started \ No newline at end of file -- cgit v1.3.1 From 1f908d88ce4ba76d15d5b961a293327961deb7f9 Mon Sep 17 00:00:00 2001 From: c1570 Date: Sat, 27 Sep 2025 00:39:29 +0200 Subject: getting_started structure --- docs/getting_started.rst | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/docs/getting_started.rst b/docs/getting_started.rst index 5e8ebd040..85f1f8a04 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -63,13 +63,14 @@ For your convenience, TinyUSB contains a handful of examples for both host and d $ git clone https://github.com/hathach/tinyusb tinyusb $ cd tinyusb -Some ports require additional port-specific SDKs (e.g., for RP2040) or binaries (e.g., for Sony Spresense) to build examples. These components are outside the scope of TinyUSB, so you should download and install them first according to the manufacturer's documentation. +TinyUSB separates example applications from board-specific hardware configurations (Board Support Packages, BSP). The BSP provides hardware abstraction including pin mappings, clock settings, linker scripts, and hardware initialization routines. + +* Example applications live in ``examples/device``, ``examples/host``, and ``examples/dual`` directories. +* BSP configurations are stored in ``hw/bsp/FAMILY/boards/BOARD_NAME``. For example, raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. When you build an example with ``BOARD=raspberry_pi_pico``, the build system automatically finds and uses the corresponding BSP. Dependencies ^^^^^^^^^^^^ -TinyUSB separates example applications from board-specific hardware configurations (Board Support Packages, BSP). Example applications live in ``examples/device``, ``examples/host``, and ``examples/dual`` directories, while BSP configurations are stored in ``hw/bsp/FAMILY/boards/BOARD_NAME``. The BSP provides hardware abstraction including pin mappings, clock settings, linker scripts, and hardware initialization routines. For example, raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. When you build an example with ``BOARD=raspberry_pi_pico``, the build system automatically finds and uses the corresponding BSP. - Before building, you must first download dependencies including MCU low-level peripheral drivers and external libraries such as FreeRTOS (required by some examples). You can do this in either of two ways: 1. Run the ``tools/get_deps.py {FAMILY}`` script to download all dependencies for a specific MCU family. To download dependencies for all families, use ``FAMILY=all``. -- cgit v1.3.1 From fa599e3ff4c41c471cd6db92fd924f95485942cd Mon Sep 17 00:00:00 2001 From: c1570 Date: Sun, 28 Sep 2025 00:40:29 +0200 Subject: streamlined getting_started --- docs/getting_started.rst | 365 ++++++++++++----------------------------------- 1 file changed, 95 insertions(+), 270 deletions(-) diff --git a/docs/getting_started.rst b/docs/getting_started.rst index 85f1f8a04..84663e486 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -2,285 +2,157 @@ Getting Started *************** -This tutorial will guide you through setting up TinyUSB for your first project. We'll cover the basic integration steps and build your first example application. +This guide will get you up and running with TinyUSB quickly. We'll start with working examples, then show you how to integrate TinyUSB into your own projects. -Add TinyUSB to your project ---------------------------- - -To incorporate TinyUSB into your project: - -* Copy this repository or add it as a git submodule to a subfolder in your project. For example, place it at ``your_project/tinyusb`` -* Add all the ``.c`` files in the ``tinyusb/src`` folder to your project -* Add ``your_project/tinyusb/src`` to your include path. Also ensure that your include path contains the configuration file ``tusb_config.h``. -* Ensure all required macros are properly defined in ``tusb_config.h``. The configuration file from the demo applications provides a good starting point, but you'll need to add additional macros such as ``CFG_TUSB_MCU`` and ``CFG_TUSB_OS``. These are typically passed by make/cmake to maintain unique configurations for different boards. -* If you're using the **device stack**, you need to implement all **tud descriptor** callbacks for the stack to work. -* Add a ``tusb_init(rhport, role)`` call to your reset initialization code. -* Call ``tusb_int_handler(rhport, in_isr)`` from your USB IRQ handler -* Implement all enabled classes' callbacks. -* If you're not using an RTOS, you must call the ``tud_task()``/``tuh_task()`` functions periodically. These task functions handle all callbacks and core functionality. - -.. note:: - TinyUSB uses consistent naming prefixes: ``tud_`` for device stack functions and ``tuh_`` for host stack functions. See the :doc:`../reference/glossary` for more details. - -.. code-block:: c - - int main(void) { - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; - // tud descriptor omitted here - tusb_init(0, &dev_init); // initialize device stack on roothub port 0 +Quick Start Examples +==================== - tusb_rhport_init_t host_init = { - .role = TUSB_ROLE_HOST, - .speed = TUSB_SPEED_AUTO - }; - tusb_init(1, &host_init); // initialize host stack on roothub port 1 +The fastest way to understand TinyUSB is to see it working. These examples demonstrate core functionality and can be built immediately. We'll assume you are using the stm32f407disco board. - while(1) { // the mainloop - your_application_code(); - tud_task(); // device task - tuh_task(); // host task - } - } +Simple Device Example +--------------------- - void USB0_IRQHandler(void) { - tusb_int_handler(0, true); - } +The `cdc_msc `_ example creates a USB device with both a virtual serial port (CDC) and mass storage (MSC). - void USB1_IRQHandler(void) { - tusb_int_handler(1, true); - } - -Examples --------- +**What it does:** +* Appears as a serial port that echoes back any text you send +* Appears as a small USB drive with a README.TXT file +* Blinks an LED to show activity -For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API should be used. Most examples will work on most of :doc:`the supported boards `. Firstly we need to ``git clone`` if not already +**Build and run:** .. code-block:: bash $ git clone https://github.com/hathach/tinyusb tinyusb $ cd tinyusb - -TinyUSB separates example applications from board-specific hardware configurations (Board Support Packages, BSP). The BSP provides hardware abstraction including pin mappings, clock settings, linker scripts, and hardware initialization routines. - -* Example applications live in ``examples/device``, ``examples/host``, and ``examples/dual`` directories. -* BSP configurations are stored in ``hw/bsp/FAMILY/boards/BOARD_NAME``. For example, raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. When you build an example with ``BOARD=raspberry_pi_pico``, the build system automatically finds and uses the corresponding BSP. - -Dependencies -^^^^^^^^^^^^ - -Before building, you must first download dependencies including MCU low-level peripheral drivers and external libraries such as FreeRTOS (required by some examples). You can do this in either of two ways: - -1. Run the ``tools/get_deps.py {FAMILY}`` script to download all dependencies for a specific MCU family. To download dependencies for all families, use ``FAMILY=all``. - -.. code-block:: bash - - $ python tools/get_deps.py rp2040 - -2. Or run the ``get-deps`` target in one of the example folders as follows. - -.. code-block:: bash - + $ python tools/get_deps.py stm32f4 # Download dependencies $ cd examples/device/cdc_msc - $ make BOARD=feather_nrf52840_express get-deps - -You only need to do this once per family. Check out :doc:`complete list of dependencies and their designated path here ` - -Build Examples -^^^^^^^^^^^^^^ + $ make BOARD=stm32f407disco all flash -Examples support both Make and CMake build systems for most MCUs. However, some MCU families (such as Espressif and RP2040) only support CMake. First change directory to an example folder. - -.. code-block:: bash +Connect to your computer and you'll see both a new serial port and a small USB drive appear. - $ cd examples/device/cdc_msc - -Then compile with make or cmake - -.. code-block:: bash - - $ # make - $ make BOARD=feather_nrf52840_express all - - $ # cmake - $ mkdir build && cd build - $ cmake -DBOARD=raspberry_pi_pico .. - $ make - -To list all available targets with cmake +Simple Host Example +------------------- -.. code-block:: bash +The `cdc_msc_hid `_ example creates a USB host that can connect to USB devices with CDC, MSC, or HID interfaces. - $ cmake --build . --target help +**What it does:** +* Detects and enumerates connected USB devices +* Communicates with CDC devices (like USB-to-serial adapters) +* Reads from MSC devices (like USB drives) +* Receives input from HID devices (like keyboards and mice) -Note: Some examples, especially those that use Vendor class (e.g., webUSB), may require udev permissions on Linux (and/or macOS) to access USB devices. It depends on your OS distribution, but typically copying ``99-tinyusb.rules`` and reloading udev is sufficient +**Build and run:** .. code-block:: bash - $ cp examples/device/99-tinyusb.rules /etc/udev/rules.d/ - $ sudo udevadm control --reload-rules && sudo udevadm trigger + $ python tools/get_deps.py stm32f4 # If not done already + $ cd examples/host/cdc_msc_hid + $ make BOARD=stm32f407disco all flash -RootHub Port Selection -~~~~~~~~~~~~~~~~~~~~~~ +Connect USB devices to see enumeration messages and device-specific interactions in the serial output. -If a board has several ports, one port is chosen by default in the individual board.mk file. Use option ``RHPORT_DEVICE=x`` or ``RHPORT_HOST=x`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: +Project Structure +----------------- -.. code-block:: bash +TinyUSB separates example applications from board-specific hardware configurations: - $ make BOARD=stm32f746disco RHPORT_DEVICE=1 all +* **Example applications**: Located in `examples/device/ `_, `examples/host/ `_, and `examples/dual/ `_ directories +* **Board Support Packages (BSP)**: Located in ``hw/bsp/FAMILY/boards/BOARD_NAME/`` with hardware abstraction including pin mappings, clock settings, and linker scripts - $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE=1 .. +For example, raspberry_pi_pico is located in `hw/bsp/rp2040/boards/raspberry_pi_pico `_ where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. When you build with ``BOARD=raspberry_pi_pico``, the build system automatically finds the corresponding BSP using the FAMILY. -Port Speed -~~~~~~~~~~ +Add TinyUSB to Your Project +============================ -An MCU can support multiple operational speeds. By default, the example build system uses the fastest speed supported by the board. Use the option ``RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED/OPT_MODE_HIGH_SPEED`` or ``RHPORT_HOST_SPEED=OPT_MODE_FULL_SPEED/OPT_MODE_HIGH_SPEED``. For example, to force the F723 to operate at full speed instead of the default high speed: +Once you've seen TinyUSB working, here's how to integrate it into your own project: -.. code-block:: bash +Integration Steps +----------------- - $ make BOARD=stm32f746disco RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED all +1. **Get TinyUSB**: Copy this repository or add it as a git submodule to your project at ``your_project/tinyusb`` - $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED .. +2. **Add source files**: Add all ``.c`` files from ``tinyusb/src/`` to your project -Size Analysis -~~~~~~~~~~~~~ +3. **Configure include paths**: Add ``your_project/tinyusb/src`` to your include path. Ensure your include path contains ``tusb_config.h`` -First install `linkermap tool `_ then ``linkermap`` target can be used to analyze code size. You may want to compile with ``NO_LTO=1`` since ``-flto`` merges code across ``.o`` files and make it difficult to analyze. +4. **Configure TinyUSB**: Create ``tusb_config.h`` with required macros like ``CFG_TUSB_MCU`` and ``CFG_TUSB_OS``. Copy from ``examples/device/*/tusb_config.h`` as a starting point -.. code-block:: bash +5. **Implement USB descriptors**: For device stack, implement all ``tud_descriptor_*_cb()`` callbacks - $ make BOARD=feather_nrf52840_express NO_LTO=1 all linkermap +6. **Initialize TinyUSB**: Add ``tusb_init()`` to your initialization code -Flashing the Device -^^^^^^^^^^^^^^^^^^^ +7. **Handle interrupts**: Call ``tusb_int_handler()`` from your USB IRQ handler -The ``flash`` target uses the default on-board debugger (jlink/cmsisdap/stlink/dfu) to flash the binary. Please install the supporting software in advance. Some boards use bootloader/DFU via serial, which requires passing the serial port to the make command +8. **Run USB tasks**: Call ``tud_task()`` (device) or ``tuh_task()`` (host) periodically in your main loop -.. code-block:: bash +9. **Implement class callbacks**: Implement callbacks for enabled USB classes - $ make BOARD=feather_nrf52840_express flash - $ make SERIAL=/dev/ttyACM0 BOARD=feather_nrf52840_express flash +Simple Integration Example +-------------------------- -Since jlink/openocd can be used with most of the boards, there is also ``flash-jlink/openocd`` (make) and ``EXAMPLE-jlink/openocd`` target for your convenience. Note for stm32 board with stlink, you can use ``flash-stlink`` target as well. +.. code-block:: c -.. code-block:: bash + #include "tusb.h" - $ make BOARD=feather_nrf52840_express flash-jlink - $ make BOARD=feather_nrf52840_express flash-openocd + int main(void) { + board_init(); // Your board initialization - $ cmake --build . --target cdc_msc-jlink - $ cmake --build . --target cdc_msc-openocd + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + // tud_descriptor_* callbacks omitted here + tusb_init(0, &dev_init); -Some boards use UF2 bootloader for drag-and-drop into a mass storage device. UF2 files can be generated with the ``uf2`` target + while(1) { + tud_task(); // TinyUSB device task + your_application(); // Your application code + } + } -.. code-block:: bash + void USB_IRQHandler(void) { + tusb_int_handler(0, true); + } - $ make BOARD=feather_nrf52840_express all uf2 +.. note:: + Unlike many libraries, TinyUSB callbacks don't need to be explicitly registered. The stack automatically calls functions with specific names (e.g., ``tud_cdc_rx_cb()``) when events occur. Simply implement the callbacks you need. - $ cmake --build . --target cdc_msc-uf2 +.. note:: + TinyUSB uses consistent naming prefixes: ``tud_`` for device stack functions and ``tuh_`` for host stack functions. See the :doc:`reference/glossary` for more details. -Debugging -^^^^^^^^^ +Development Tips +================ -To compile for debugging add ``DEBUG=1``\ , for example +**Debug builds and logging:** .. code-block:: bash - $ make BOARD=feather_nrf52840_express DEBUG=1 all - - $ cmake -DBOARD=feather_nrf52840_express -DCMAKE_BUILD_TYPE=Debug .. + $ make BOARD=stm32f407disco DEBUG=1 all # Debug build + $ make BOARD=stm32f407disco LOG=2 all # Enable detailed logging -Enable Logging -~~~~~~~~~~~~~~ - -If you encounter issues running examples or need to submit a bug report, you can enable TinyUSB's built-in debug logging with the optional ``LOG=`` parameter. ``LOG=1`` prints only error messages, while ``LOG=2`` prints more detailed information about ongoing events. ``LOG=3`` or higher is not used yet. +**CMake build system:** .. code-block:: bash - $ make BOARD=feather_nrf52840_express LOG=2 all - - $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 .. - -Logging Performance Impact -~~~~~~~~~~~~~~~~~~~~~~~~~~ - -By default, log messages are printed via the on-board UART, which is slow and consumes significant CPU time compared to USB speeds. If your board supports an on-board or external debugger, it would be more efficient to use it for logging. There are 2 protocols: - - -* `LOGGER=rtt`: use `Segger RTT protocol `_ - - * Cons: requires jlink as the debugger. - * Pros: work with most if not all MCUs - * Software viewer is JLink RTT Viewer/Client/Logger which is bundled with JLink driver package. - -* ``LOGGER=swo``\ : Use dedicated SWO pin of ARM Cortex SWD debug header. + $ mkdir build && cd build + $ cmake -DBOARD=stm32f407disco .. + $ make - * Cons: Only works with ARM Cortex MCUs except M0 - * Pros: should be compatible with more debugger that support SWO. - * Software viewer should be provided along with your debugger driver. +**Alternative flash methods:** .. code-block:: bash - $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=rtt all - $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=swo all - - $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=rtt .. - $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=swo .. - -IAR Support -^^^^^^^^^^^ - -IAR Embedded Workbench is a commercial IDE and toolchain for embedded development. TinyUSB provides integration support for IAR through project connection files and native CMake support. - -Use project connection -~~~~~~~~~~~~~~~~~~~~~~ - -IAR Project Connection files are provided to import TinyUSB stack into your project. - -* A buildable project for your MCU needs to be created in advance. - - * Take example of STM32F0: - - - You need ``stm32f0xx.h``, ``startup_stm32f0xx.s``, and ``system_stm32f0xx.c``. - - - ``STM32F0xx_HAL_Driver`` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. - -* Open ``Tools -> Configure Custom Argument Variables`` (Switch to ``Global`` tab if you want to do it for all your projects) - Click ``New Group ...``, name it to ``TUSB``, Click ``Add Variable ...``, name it to ``TUSB_DIR``, change it's value to the path of your TinyUSB stack, - for example ``C:\\tinyusb`` - -**Import stack only** - -Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\tools\\iar_template.ipcf``. - -**Run examples** - -1. Run ``iar_gen.py`` to generate .ipcf files of examples: - - .. code-block:: - - > cd C:\tinyusb\tools - > python iar_gen.py - -2. Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\examples\\(.ipcf of example)``. - For example ``C:\\tinyusb\\examples\\device\\cdc_msc\\iar_cdc_msc.ipcf`` + $ make BOARD=stm32f407disco flash-jlink # Use J-Link + $ make BOARD=stm32f407disco flash-openocd # Use OpenOCD + $ make BOARD=stm32f407disco all uf2 # Generate UF2 for drag-and-drop -Native CMake support -~~~~~~~~~~~~~~~~~~~~ +**IAR Embedded Workbench:** -With 9.50.1 release, IAR added experimental native CMake support (strangely not mentioned in public release note). Now it's possible to import CMakeLists.txt then build and debug as a normal project. - -Following these steps: - -1. Add IAR compiler binary path to system ``PATH`` environment variable, such as ``C:\Program Files\IAR Systems\Embedded Workbench 9.2\arm\bin``. -2. Create new project in IAR, in Tool chain dropdown menu, choose CMake for Arm then Import ``CMakeLists.txt`` from chosen example directory. -3. Set up board option in ``Option - CMake/CMSIS-TOOLBOX - CMake``, for example ``-DBOARD=stm32f439nucleo -DTOOLCHAIN=iar``, **Uncheck 'Override tools in env'**. -4. (For debug only) Choose correct CPU model in ``Option - General Options - Target``, to profit register and memory view. +For IAR users, project connection files are available. Import `tools/iar_template.ipcf `_ or use native CMake support (IAR 9.50.1+). See `tools/iar_gen.py `_ for automated project generation. Common Issues and Solutions ---------------------------- +=========================== **Build Errors** @@ -294,65 +166,18 @@ Common Issues and Solutions * **Enumeration failure**: Enable logging with ``LOG=2`` and check for USB protocol errors * **Hard faults/crashes**: Verify interrupt handler setup and stack size allocation -Quick Start Examples --------------------- - -Now that you have TinyUSB set up, you can try these examples to see it in action. - -Simple Device Example -^^^^^^^^^^^^^^^^^^^^^ - -The ``cdc_msc`` example creates a USB device with both a virtual serial port (CDC) and mass storage (MSC). This is the most commonly used example and demonstrates core device functionality. - -**What it does:** -* Appears as a serial port that echoes back any text you send -* Appears as a small USB drive with a README.TXT file -* Blinks an LED to show activity - -**Build and run:** - -.. code-block:: bash - - $ cd examples/device/cdc_msc - $ make BOARD=stm32f407disco all - $ make BOARD=stm32f407disco flash - -**Key files:** -* ``src/main.c`` - Main application with ``tud_task()`` loop -* ``src/usb_descriptors.c`` - USB device descriptors -* ``src/msc_disk.c`` - Mass storage implementation - -**Expected behavior:** Connect to your computer and you'll see both a new serial port and a small USB drive appear. - -Simple Host Example -^^^^^^^^^^^^^^^^^^^ +**Linux Permissions** -The ``cdc_msc_hid`` example creates a USB host that can connect to USB devices with CDC, MSC, or HID interfaces. - -**What it does:** -* Detects and enumerates connected USB devices -* Communicates with CDC devices (like USB-to-serial adapters) -* Reads from MSC devices (like USB drives) -* Receives input from HID devices (like keyboards and mice) - -**Build and run:** +Some examples require udev permissions to access USB devices: .. code-block:: bash - $ cd examples/host/cdc_msc_hid - $ make BOARD=stm32f407disco all - $ make BOARD=stm32f407disco flash - -**Key files:** -* ``src/main.c`` - Main application with ``tuh_task()`` loop -* ``src/cdc_app.c`` - CDC host functionality -* ``src/msc_app.c`` - Mass storage host functionality -* ``src/hid_app.c`` - HID host functionality - -**Expected behavior:** Connect USB devices to see enumeration messages and device-specific interactions in the serial output. + $ cp `examples/device/99-tinyusb.rules `_ /etc/udev/rules.d/ + $ sudo udevadm control --reload-rules && sudo udevadm trigger Next Steps -^^^^^^^^^^ +========== * Check :doc:`reference/boards` for board-specific information -* Explore more examples in ``examples/device/`` and ``examples/host/`` directories +* Explore more examples in `examples/device/ `_ and `examples/host/ `_ directories +* Read :doc:`reference/usb_concepts` to understand USB fundamentals -- cgit v1.3.1 From 9dd67b19e207edd17917296a5c7c185c86507fa8 Mon Sep 17 00:00:00 2001 From: c1570 Date: Mon, 20 Oct 2025 20:19:40 +0200 Subject: revert unnecessary Sphinx config changes --- docs/conf.py | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/docs/conf.py b/docs/conf.py index be9aeaaf9..4249d41f7 100755 --- a/docs/conf.py +++ b/docs/conf.py @@ -24,29 +24,9 @@ extensions = [ 'sphinx.ext.autodoc', 'sphinx.ext.intersphinx', 'sphinx.ext.todo', - 'sphinx.ext.viewcode', - 'sphinx.ext.napoleon', 'sphinx_autodoc_typehints', ] -# Autodoc configuration -autodoc_default_options = { - 'members': True, - 'undoc-members': True, - 'show-inheritance': True, -} - -# Napoleon configuration for Google/NumPy style docstrings -napoleon_google_docstring = True -napoleon_numpy_docstring = True -napoleon_include_init_with_doc = False -napoleon_include_private_with_doc = False - -# Intersphinx mapping for cross-references -intersphinx_mapping = { - 'python': ('https://docs.python.org/3', None), -} - templates_path = ['_templates'] exclude_patterns = ['_build'] -- cgit v1.3.1 From 418239a2165551201ace6ddb49ce327c825e2607 Mon Sep 17 00:00:00 2001 From: c1570 Date: Mon, 20 Oct 2025 20:38:05 +0200 Subject: add missing class driver callbacks --- docs/reference/architecture.rst | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/docs/reference/architecture.rst b/docs/reference/architecture.rst index ab451a91a..8e4c6890e 100644 --- a/docs/reference/architecture.rst +++ b/docs/reference/architecture.rst @@ -199,6 +199,8 @@ All USB classes follow a similar architecture: Class Driver Interface ---------------------- +See ``usbd.c``. + **Required Functions**: - ``init()``: Initialize class driver - ``reset()``: Reset class state @@ -208,7 +210,9 @@ Class Driver Interface **Optional Functions**: - ``close()``: Clean up class resources -- ``sof_cb()``: Start-of-frame processing +- ``deinit()``: Deinitialize class driver +- ``sof()``: Start-of-frame processing +- ``xfer_isr()``: Called from USB ISR context on transfer completion. Data will get queued for ``xfer_cb()`` only if this returns ``false``. Descriptor Management --------------------- -- cgit v1.3.1 From 3cb248f2e59dade48e724946883a6f67de3680e4 Mon Sep 17 00:00:00 2001 From: c1570 Date: Mon, 20 Oct 2025 20:56:29 +0200 Subject: add note about CMake --- docs/getting_started.rst | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/docs/getting_started.rst b/docs/getting_started.rst index 84663e486..a3d36a55c 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -7,7 +7,9 @@ This guide will get you up and running with TinyUSB quickly. We'll start with wo Quick Start Examples ==================== -The fastest way to understand TinyUSB is to see it working. These examples demonstrate core functionality and can be built immediately. We'll assume you are using the stm32f407disco board. +The fastest way to understand TinyUSB is to see it working. These examples demonstrate core functionality and can be built immediately. + +We'll assume you are using the stm32f407disco board. For other boards, see ``Board Support Packages`` below. Simple Device Example --------------------- @@ -27,7 +29,7 @@ The `cdc_msc Date: Tue, 21 Oct 2025 14:09:00 +0200 Subject: use CMake in getting_started examples --- docs/getting_started.rst | 34 +++++++++------------------------- 1 file changed, 9 insertions(+), 25 deletions(-) diff --git a/docs/getting_started.rst b/docs/getting_started.rst index a3d36a55c..32c80b91c 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -27,11 +27,12 @@ The `cdc_msc Date: Fri, 17 Oct 2025 16:54:15 +0700 Subject: refactor family.cmake: rename add_board_target() to family_add_board() and move it to family_configure_common() also move startup and linker from board target to actual exe --- examples/device/board_test/src/main.c | 5 +- hw/bsp/at32f402_405/family.cmake | 85 +++++------- hw/bsp/at32f403a_407/family.cmake | 80 +++++------ hw/bsp/at32f413/family.cmake | 81 +++++------ hw/bsp/at32f415/family.cmake | 85 +++++------- hw/bsp/at32f423/family.cmake | 85 +++++------- hw/bsp/at32f425/family.cmake | 85 +++++------- hw/bsp/at32f435_437/family.cmake | 85 +++++------- hw/bsp/broadcom_32bit/family.cmake | 92 +++++-------- hw/bsp/broadcom_64bit/family.cmake | 94 +++++-------- hw/bsp/ch32v10x/family.cmake | 91 +++++-------- hw/bsp/ch32v20x/family.cmake | 91 ++++++------- hw/bsp/ch32v30x/family.cmake | 78 +++++------ hw/bsp/cxd56/family.cmake | 81 +++++------ hw/bsp/da1469x/family.cmake | 89 +++++------- hw/bsp/efm32/family.cmake | 80 +++++------ hw/bsp/f1c100s/family.cmake | 101 +++++++------- hw/bsp/family_support.cmake | 53 ++++++-- hw/bsp/fomu/family.cmake | 88 +++++------- hw/bsp/gd32vf103/family.cmake | 93 +++++-------- hw/bsp/imxrt/family.cmake | 94 ++++++------- hw/bsp/kinetis_k/family.cmake | 84 +++++------- hw/bsp/kinetis_k32l2/family.cmake | 84 +++++------- hw/bsp/kinetis_kl/family.cmake | 77 ++++------- hw/bsp/lpc11/family.cmake | 60 ++++---- hw/bsp/lpc13/family.cmake | 9 +- hw/bsp/lpc15/family.cmake | 9 +- hw/bsp/lpc17/family.cmake | 9 +- hw/bsp/lpc18/family.cmake | 9 +- hw/bsp/lpc40/family.cmake | 9 +- hw/bsp/lpc43/family.cmake | 79 +++++------ hw/bsp/lpc51/family.cmake | 88 +++++------- hw/bsp/lpc54/family.cmake | 94 +++++-------- hw/bsp/lpc55/family.cmake | 95 ++++++------- hw/bsp/maxim/family.cmake | 83 +++++------- hw/bsp/mcx/family.cmake | 110 ++++++--------- hw/bsp/mm32/family.cmake | 82 +++++------ hw/bsp/msp430/family.cmake | 40 ++---- hw/bsp/msp432e4/family.cmake | 90 +++++------- hw/bsp/nrf/family.cmake | 108 +++++++-------- hw/bsp/nuc100_120/family.cmake | 67 +++++---- hw/bsp/nuc121_125/family.cmake | 70 ++++------ hw/bsp/nuc126/family.cmake | 67 ++++----- hw/bsp/nuc505/family.cmake | 64 ++++----- hw/bsp/ra/family.cmake | 173 ++++++++++-------------- hw/bsp/samd11/family.cmake | 74 ++++------ hw/bsp/samd2x_l2x/family.cmake | 92 +++++-------- hw/bsp/samd5x_e5x/family.cmake | 74 ++++------ hw/bsp/same7x/boards/same70_qmtech/board.h | 2 +- hw/bsp/same7x/family.cmake | 79 ++++------- hw/bsp/samg/family.cmake | 75 ++++------ hw/bsp/stm32c0/family.cmake | 84 +++++------- hw/bsp/stm32f0/family.cmake | 82 +++++------ hw/bsp/stm32f1/family.cmake | 88 +++++------- hw/bsp/stm32f2/family.cmake | 92 +++++-------- hw/bsp/stm32f3/family.cmake | 82 +++++------ hw/bsp/stm32f4/family.cmake | 86 +++++------- hw/bsp/stm32f7/family.cmake | 86 +++++------- hw/bsp/stm32g0/family.cmake | 86 +++++------- hw/bsp/stm32g4/family.cmake | 84 +++++------- hw/bsp/stm32h5/family.cmake | 88 +++++------- hw/bsp/stm32h7/boards/stm32h743eval/board.cmake | 2 +- hw/bsp/stm32h7/family.cmake | 82 ++++------- hw/bsp/stm32h7rs/family.cmake | 98 ++++++-------- hw/bsp/stm32l0/family.cmake | 82 +++++------ hw/bsp/stm32l4/family.cmake | 90 +++++------- hw/bsp/stm32n6/family.cmake | 98 ++++++-------- hw/bsp/stm32u0/family.cmake | 94 ++++++------- hw/bsp/stm32u5/family.cmake | 97 ++++++------- hw/bsp/stm32wb/family.cmake | 90 +++++------- hw/bsp/stm32wba/family.cmake | 100 ++++++-------- hw/bsp/tm4c/family.cmake | 76 +++++------ hw/bsp/xmc4000/family.cmake | 77 ++++------- 73 files changed, 2253 insertions(+), 3363 deletions(-) diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 872a97108..ee0829e5b 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -45,7 +45,6 @@ int main(void) { uint32_t start_ms = 0; bool led_state = false; - const size_t hello_len = strlen(HELLO_STR); while (1) { uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED; @@ -67,12 +66,12 @@ int main(void) { printf(HELLO_STR); #ifndef LOGGER_UART - board_uart_write(HELLO_STR, hello_len); + board_uart_write(HELLO_STR, sizeof(HELLO_STR)-1); #endif } board_led_write(led_state); - led_state = 1 - led_state; // toggle + led_state = !led_state; // toggle } } } diff --git a/hw/bsp/at32f402_405/family.cmake b/hw/bsp/at32f402_405/family.cmake index b10760cef..113bc0305 100644 --- a/hw/bsp/at32f402_405/family.cmake +++ b/hw/bsp/at32f402_405/family.cmake @@ -32,25 +32,21 @@ if (NOT DEFINED RHPORT_HOST_SPEED) endif () #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c @@ -58,7 +54,6 @@ function(add_board_target BOARD_TARGET) ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -74,59 +69,49 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/at32f403a_407/family.cmake b/hw/bsp/at32f403a_407/family.cmake index ae4037088..5f539228d 100644 --- a/hw/bsp/at32f403a_407/family.cmake +++ b/hw/bsp/at32f403a_407/family.cmake @@ -15,25 +15,21 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c @@ -41,7 +37,6 @@ function(add_board_target BOARD_TARGET) ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -51,57 +46,46 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/at32f413/family.cmake b/hw/bsp/at32f413/family.cmake index b534bcbbc..d62964730 100644 --- a/hw/bsp/at32f413/family.cmake +++ b/hw/bsp/at32f413/family.cmake @@ -15,25 +15,21 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c @@ -41,7 +37,6 @@ function(add_board_target BOARD_TARGET) ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -51,56 +46,46 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/at32f415/family.cmake b/hw/bsp/at32f415/family.cmake index 8ac946265..35fad5a87 100644 --- a/hw/bsp/at32f415/family.cmake +++ b/hw/bsp/at32f415/family.cmake @@ -15,32 +15,27 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -49,58 +44,48 @@ function(add_board_target BOARD_TARGET) ${AT32_SDK_LIB}/drivers/inc ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/at32f423/family.cmake b/hw/bsp/at32f423/family.cmake index 17c3f37a2..36c0466de 100644 --- a/hw/bsp/at32f423/family.cmake +++ b/hw/bsp/at32f423/family.cmake @@ -15,25 +15,21 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c @@ -41,7 +37,6 @@ function(add_board_target BOARD_TARGET) ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -51,58 +46,48 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/at32f425/family.cmake b/hw/bsp/at32f425/family.cmake index 3f6b36a6b..176595e12 100644 --- a/hw/bsp/at32f425/family.cmake +++ b/hw/bsp/at32f425/family.cmake @@ -15,32 +15,27 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -49,58 +44,48 @@ function(add_board_target BOARD_TARGET) ${AT32_SDK_LIB}/drivers/inc ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/at32f435_437/family.cmake b/hw/bsp/at32f435_437/family.cmake index 085e5462b..bdc7292d5 100644 --- a/hw/bsp/at32f435_437/family.cmake +++ b/hw/bsp/at32f435_437/family.cmake @@ -15,25 +15,21 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c @@ -42,7 +38,6 @@ function(add_board_target BOARD_TARGET) ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_exint.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -58,58 +53,48 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake index 1ec54b06f..d681e4426 100644 --- a/hw/bsp/broadcom_32bit/family.cmake +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -10,24 +10,20 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS BCM2835 CACHE INTERNAL "") - #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${SDK_DIR}/broadcom/link.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - set(STARTUP_FILE_GNU ${SDK_DIR}/broadcom/boot.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${SDK_DIR}/broadcom/link.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/broadcom/boot.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Startup & Linker script +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/broadcom/gen/interrupt_handlers.c ${SDK_DIR}/broadcom/gpio.c @@ -35,7 +31,6 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/broadcom/mmu.c ${SDK_DIR}/broadcom/caches.c ${SDK_DIR}/broadcom/vcmailbox.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_compile_options(${BOARD_TARGET} PUBLIC -O0 @@ -49,65 +44,52 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - "LINKER:--entry=_start" - --specs=nosys.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - "LINKER:--entry=_start" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_BCM2835) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_BCM2835) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + "LINKER:--entry=_start" + --specs=nosys.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + "LINKER:--entry=_start" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake index e87aaa3a4..1be5c95eb 100644 --- a/hw/bsp/broadcom_64bit/family.cmake +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -11,24 +11,20 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/aarch64_${ set(FAMILY_MCUS BCM2711 BCM2835 CACHE INTERNAL "") - #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${SDK_DIR}/broadcom/link8.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - set(STARTUP_FILE_GNU ${SDK_DIR}/broadcom/boot8.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${SDK_DIR}/broadcom/link8.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/broadcom/boot8.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/broadcom/gen/interrupt_handlers.c ${SDK_DIR}/broadcom/gpio.c @@ -36,7 +32,6 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/broadcom/mmu.c ${SDK_DIR}/broadcom/caches.c ${SDK_DIR}/broadcom/vcmailbox.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_compile_options(${BOARD_TARGET} PUBLIC -O0 @@ -54,67 +49,52 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") -# target_compile_options(${BOARD_TARGET} PUBLIC -# ) - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - "LINKER:--entry=_start" - --specs=nosys.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - "LINKER:--entry=_start" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_BCM${BCM_VERSION}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_BCM${BCM_VERSION}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + "LINKER:--entry=_start" + --specs=nosys.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + "LINKER:--entry=_start" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake index a73898050..1c9d41740 100644 --- a/hw/bsp/ch32v10x/family.cmake +++ b/hw/bsp/ch32v10x/family.cmake @@ -16,24 +16,21 @@ set(FAMILY_MCUS CH32V103 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${CH32_FAMILY}.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}.S) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${CH32_FAMILY}.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_SRC_DIR}/Core/core_riscv.c ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c @@ -41,76 +38,58 @@ function(add_board_target BOARD_TARGET) ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_SRC_DIR}/Core ${SDK_SRC_DIR}/Peripheral/inc ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) update_board(${BOARD_TARGET}) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_compile_options(${BOARD_TARGET} PUBLIC - -mcmodel=medany - ) - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -Wl,--defsym=__FLASH_SIZE=${LD_FLASH_SIZE} - -Wl,--defsym=__RAM_SIZE=${LD_RAM_SIZE} - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - message(FATAL_ERROR "Clang is not supported for MSP432E4") - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_compile_options(${TARGET} PUBLIC -mcmodel=medany) + endif() endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_CH32V103) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_CH32V103) - - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/wch/dcd_ch32_usbfs.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -Wl,--defsym=__FLASH_SIZE=${LD_FLASH_SIZE} + -Wl,--defsym=__RAM_SIZE=${LD_RAM_SIZE} + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_openocd_wch(${TARGET}) - - #family_add_uf2(${TARGET} ${UF2_FAMILY_ID}) #family_flash_uf2(${TARGET} ${UF2_FAMILY_ID}) endfunction() diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index 10044d5b3..1ce83bed9 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -24,24 +24,21 @@ endif () set(RHPORT_HOST 1) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${CH32_FAMILY}.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}_${MCU_VARIANT}.S) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${CH32_FAMILY}.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}_${MCU_VARIANT}.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_SRC_DIR}/Core/core_riscv.c ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_flash.c @@ -50,7 +47,6 @@ function(add_board_target BOARD_TARGET) ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_SRC_DIR}/Core @@ -79,65 +75,54 @@ function(add_board_target BOARD_TARGET) ) endif() - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_compile_options(${BOARD_TARGET} PUBLIC - -mcmodel=medany - ) - target_link_options(${BOARD_TARGET} PUBLIC - -nostartfiles - --specs=nosys.specs --specs=nano.specs - -Wl,--defsym=__FLASH_SIZE=${LD_FLASH_SIZE} - -Wl,--defsym=__RAM_SIZE=${LD_RAM_SIZE} - "LINKER:--script=${LD_FILE_GNU}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - message(FATAL_ERROR "Clang is not supported for CH32v") - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_compile_options(${TARGET} PUBLIC -mcmodel=medany) + endif() endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ${TOP}/src/portable/wch/hcd_ch32_usbfs.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + -nostartfiles + --specs=nosys.specs --specs=nano.specs + -Wl,--defsym=__FLASH_SIZE=${LD_FLASH_SIZE} + -Wl,--defsym=__RAM_SIZE=${LD_RAM_SIZE} + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/wch/dcd_ch32_usbfs.c - ${TOP}/src/portable/wch/hcd_ch32_usbfs.c - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_openocd_wch(${TARGET}) family_flash_wlink_rs(${TARGET}) - - #family_add_uf2(${TARGET} ${UF2_FAMILY_ID}) #family_flash_uf2(${TARGET} ${UF2_FAMILY_ID}) endfunction() diff --git a/hw/bsp/ch32v30x/family.cmake b/hw/bsp/ch32v30x/family.cmake index 0fd9b786a..cbf86334e 100644 --- a/hw/bsp/ch32v30x/family.cmake +++ b/hw/bsp/ch32v30x/family.cmake @@ -20,24 +20,21 @@ if (NOT DEFINED SPEED) endif() #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/ch32v30x.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/ch32v30x.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_SRC_DIR}/Core/core_riscv.c ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c @@ -46,7 +43,6 @@ function(add_board_target BOARD_TARGET) ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${CH32_FAMILY}_it.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_SRC_DIR}/Core @@ -73,55 +69,47 @@ function(add_board_target BOARD_TARGET) -fmessage-length=0 -fsigned-char ) - target_link_options(${BOARD_TARGET} PUBLIC - -nostartfiles - --specs=nosys.specs --specs=nano.specs - -Wl,--defsym=__FLASH_SIZE=${LD_FLASH_SIZE} - -Wl,--defsym=__RAM_SIZE=${LD_RAM_SIZE} - "LINKER:--script=${LD_FILE_GNU}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - message(FATAL_ERROR "Clang is not supported for CH32v") - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_CH32V307) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/debug_uart.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/wch/dcd_ch32_usbhs.c + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_CH32V307) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/wch/dcd_ch32_usbhs.c - ${TOP}/src/portable/wch/dcd_ch32_usbfs.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + -nostartfiles + --specs=nosys.specs --specs=nano.specs + -Wl,--defsym=__FLASH_SIZE=${LD_FLASH_SIZE} + -Wl,--defsym=__RAM_SIZE=${LD_RAM_SIZE} + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_openocd_wch(${TARGET}) diff --git a/hw/bsp/cxd56/family.cmake b/hw/bsp/cxd56/family.cmake index 993f8f456..6cfe04d93 100644 --- a/hw/bsp/cxd56/family.cmake +++ b/hw/bsp/cxd56/family.cmake @@ -12,30 +12,24 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS CXD56 CACHE INTERNAL "") # Detect platform for mkspk tool -set(PLATFORM ${CMAKE_SYSTEM_NAME}) -if(PLATFORM STREQUAL "Darwin") +if(CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin") set(MKSPK ${TOP}/hw/mcu/sony/cxd56/mkspk/mkspk) -elseif(PLATFORM STREQUAL "Linux") +elseif(CMAKE_HOST_SYSTEM_NAME STREQUAL "Linux") set(MKSPK ${TOP}/hw/mcu/sony/cxd56/mkspk/mkspk) else() set(MKSPK ${TOP}/hw/mcu/sony/cxd56/mkspk/mkspk.exe) endif() #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_GNU ${SDK_DIR}/nuttx/scripts/ramconfig.ld) - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () +set(LD_FILE_GNU ${SDK_DIR}/nuttx/scripts/ramconfig.ld) +set(LD_FILE_Clang ${LD_FILE_GNU}) +#------------------------------------ +# BOARD Target +#------------------------------------ +function(family_add_board BOARD_TARGET) # Spresense uses NuttX libraries add_library(${BOARD_TARGET} INTERFACE) @@ -54,6 +48,7 @@ function(add_board_target BOARD_TARGET) target_compile_options(${BOARD_TARGET} INTERFACE -pipe + -std=gnu11 -fno-builtin -fno-strength-reduce -fomit-frame-pointer @@ -65,42 +60,20 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} INTERFACE - "LINKER:--script=${LD_FILE_GNU}" - -Xlinker --entry=__start - -nostartfiles - -nodefaultlibs - -Wl,--gc-sections - -u spresense_main - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} INTERFACE - "LINKER:--script=${LD_FILE_Clang}" - -Xlinker --entry=__start - -nostartfiles - -nodefaultlibs - -u spresense_main - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_CXD56) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/sony/cxd56/dcd_cxd56.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -108,18 +81,34 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_CXD56) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/sony/cxd56/dcd_cxd56.c - ) target_link_libraries(${TARGET} PUBLIC - board_${BOARD} ${SDK_DIR}/nuttx/libs/libapps.a ${SDK_DIR}/nuttx/libs/libnuttx.a gcc # Compiler runtime support for FP operations like __aeabi_dmul ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -Xlinker --entry=__start + -nostartfiles + -nodefaultlibs + -Wl,--gc-sections + -u spresense_main + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + -Xlinker --entry=__start + -nostartfiles + -nodefaultlibs + -u spresense_main + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + # Build mkspk tool add_custom_command(OUTPUT ${MKSPK} COMMAND $(MAKE) -C ${TOP}/hw/mcu/sony/cxd56/mkspk diff --git a/hw/bsp/da1469x/family.cmake b/hw/bsp/da1469x/family.cmake index b5bec52c8..473db6531 100644 --- a/hw/bsp/da1469x/family.cmake +++ b/hw/bsp/da1469x/family.cmake @@ -10,28 +10,24 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS DA1469X CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/da1469x.ld) - endif () - - if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) - set(STARTUP_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/gcc_startup_da1469x.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - endif () +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/da1469x.ld) +endif () +if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) +set(STARTUP_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/gcc_startup_da1469x.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +endif () +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${MCU_DIR}/src/system_da1469x.c ${MCU_DIR}/src/da1469x_clock.c ${MCU_DIR}/src/hal_gpio.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_compile_options(${BOARD_TARGET} PUBLIC -mthumb-interwork) target_compile_definitions(${BOARD_TARGET} PUBLIC @@ -46,31 +42,11 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -L${NRFX_DIR}/mdk - --specs=nosys.specs --specs=nano.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -L${NRFX_DIR}/mdk - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ - function(family_flash_jlink_dialog TARGET) set(JLINKEXE JLinkExe) set(JLINK_IF swd) @@ -107,38 +83,41 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_DA1469X) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/dialog/da146xx/dcd_da146xx.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_DA1469X) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/dialog/da146xx/dcd_da146xx.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink_dialog(${TARGET}) diff --git a/hw/bsp/efm32/family.cmake b/hw/bsp/efm32/family.cmake index f5afd6fe4..36d88f071 100644 --- a/hw/bsp/efm32/family.cmake +++ b/hw/bsp/efm32/family.cmake @@ -15,27 +15,19 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS EFM32GG CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_GNU ${SILABS_CMSIS}/Source/GCC/${EFM32_FAMILY}.ld) - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SILABS_CMSIS}/Source/GCC/startup_${EFM32_FAMILY}.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_GNU ${SILABS_CMSIS}/Source/GCC/${EFM32_FAMILY}.ld) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SILABS_CMSIS}/Source/GCC/startup_${EFM32_FAMILY}.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SILABS_CMSIS}/Source/system_${EFM32_FAMILY}.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC @@ -50,57 +42,47 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_EFM32GG) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_EFM32GG) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/f1c100s/family.cmake b/hw/bsp/f1c100s/family.cmake index 211c6645c..78fc3c6c7 100644 --- a/hw/bsp/f1c100s/family.cmake +++ b/hw/bsp/f1c100s/family.cmake @@ -11,25 +11,21 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS F1C100S CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # LD_FILE and STARTUP_FILE can be defined in board.cmake - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${SDK_DIR}/f1c100s.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/machine/start.S) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${SDK_DIR}/f1c100s.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${SDK_DIR}/machine/start.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/lib/malloc.c ${SDK_DIR}/lib/printf.c @@ -43,71 +39,68 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/machine/sys-mmu.c ${SDK_DIR}/machine/sys-spi-flash.c ${SDK_DIR}/machine/f1c100s-intc.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - target_compile_definitions(${BOARD_TARGET} PUBLIC __ARM32_ARCH__=5 + __ARM926EJS__ + ) + target_compile_options(${BOARD_TARGET} PUBLIC + -ffreestanding + -std=gnu99 + -mno-thumb-interwork + -Wno-float-equal + -Wno-unused-parameter + -Wno-error=array-bounds ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR}/include ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -lgcc - --specs=nosys.specs --specs=nano.specs - "LINKER:--defsym=__bss_end__=__bss_end" - "LINKER:--defsym=__bss_start__=__bss_start" - "LINKER:--defsym=end=__bss_end" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_F1C100S) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/sunxi/dcd_sunxi_musb.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_F1C100S) - target_sources(${TARGET} PRIVATE - ${TOP}/src/portable/sunxi/dcd_sunxi_musb.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_libraries(${TARGET} PUBLIC + gcc + ) + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + "LINKER:--defsym=__bss_end__=__bss_end" + "LINKER:--defsym=__bss_start__=__bss_start" + "LINKER:--defsym=end=__bss_end" + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 23f63e759..7df1b154a 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -2,6 +2,7 @@ include_guard(GLOBAL) include(CMakePrintHelpers) set(CMAKE_EXPORT_COMPILE_COMMANDS ON) +#set(CMAKE_C_STANDARD 11) # TOP is path to root directory set(TOP "${CMAKE_CURRENT_LIST_DIR}/../..") @@ -13,19 +14,25 @@ set(UF2CONV_PY ${TOP}/tools/uf2/utils/uf2conv.py) # Toolchain # Can be changed via -DTOOLCHAIN=gcc|iar or -DCMAKE_C_COMPILER= #------------------------------------------------------------- -# Detect toolchain based on CMAKE_C_COMPILER -if (DEFINED CMAKE_C_COMPILER) - string(FIND ${CMAKE_C_COMPILER} "iccarm" IS_IAR) - string(FIND ${CMAKE_C_COMPILER} "clang" IS_CLANG) - string(FIND ${CMAKE_C_COMPILER} "gcc" IS_GCC) +function(detect_compiler COMPILER_PATH RESULT) + string(FIND ${COMPILER_PATH} "iccarm" IS_IAR) + string(FIND ${COMPILER_PATH} "clang" IS_CLANG) + string(FIND ${COMPILER_PATH} "gcc" IS_GCC) if (NOT IS_IAR EQUAL -1) - set(TOOLCHAIN iar) + set(${RESULT} iar PARENT_SCOPE) elseif (NOT IS_CLANG EQUAL -1) - set(TOOLCHAIN clang) + set(${RESULT} clang PARENT_SCOPE) elseif (NOT IS_GCC EQUAL -1) - set(TOOLCHAIN gcc) + set(${RESULT} gcc PARENT_SCOPE) endif () +endfunction() + +# Detect toolchain based on CMAKE_C_COMPILER or ENV{CC} +if (DEFINED CMAKE_C_COMPILER) + detect_compiler(${CMAKE_C_COMPILER} TOOLCHAIN) +elseif (DEFINED ENV{CC}) + detect_compiler($ENV{CC} TOOLCHAIN) endif () if (NOT DEFINED TOOLCHAIN) @@ -198,6 +205,9 @@ endfunction() # Common Target Configure # Most families use these settings except rp2040 and espressif #------------------------------------------------------------- +function(family_add_board BOARD_TARGET) + # empty function, should be redefined in FAMILY/family.cmake +endfunction() # Add RTOS to example function(family_add_rtos TARGET RTOS) @@ -223,6 +233,17 @@ endfunction() # Add common configuration to example function(family_configure_common TARGET RTOS) + # Add board target + set(BOARD_TARGET board_${BOARD}) + if (NOT RTOS STREQUAL zephyr) + if (NOT TARGET ${BOARD_TARGET}) + family_add_board(${BOARD_TARGET}) + set_target_properties(${BOARD_TARGET} PROPERTIES ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) + set_target_properties(${BOARD_TARGET} PROPERTIES SKIP_LINTING ON) + endif () + target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET}) + endif () + family_add_rtos(${TARGET} ${RTOS}) # Add BOARD_${BOARD} define @@ -252,6 +273,9 @@ function(family_configure_common TARGET RTOS) target_sources(${TARGET} PUBLIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c) target_include_directories(${TARGET} PUBLIC ${TOP}/lib/SEGGER_RTT/RTT) # target_compile_definitions(${TARGET} PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) + set_source_files_properties(${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c PROPERTIES + SKIP_LINTING ON + ) endif () else () target_compile_definitions(${TARGET} PUBLIC LOGGER_UART) @@ -266,6 +290,19 @@ function(family_configure_common TARGET RTOS) endif () elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${TARGET} PUBLIC "LINKER:--map=$.map") + + # link time analysis with C-STAT +# add_custom_command(TARGET ${TARGET} POST_BUILD +# COMMAND ${CMAKE_C_ICSTAT} +# --db=${CMAKE_BINARY_DIR}/cstat.db +# link_analyze -- ${CMAKE_LINKER} $ +# COMMAND_EXPAND_LISTS +# ) +# # generate C-STAT report +# add_custom_command(TARGET ${TARGET} POST_BUILD +# COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/cstat_report +# COMMAND ireport --db=${CMAKE_BINARY_DIR}/cstat.db --full --project ${TARGET} --output ${CMAKE_CURRENT_BINARY_DIR}/cstat_report/${TARGET}.html +# ) endif () # run size after build diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake index 0c7eae90e..18290d437 100644 --- a/hw/bsp/fomu/family.cmake +++ b/hw/bsp/fomu/family.cmake @@ -10,85 +10,67 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS VALENTYUSB_EPTRI CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/fomu.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/crt0-vexriscv.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/fomu.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/crt0-vexriscv.S) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} INTERFACE) + target_include_directories(${BOARD_TARGET} INTERFACE ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/include ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - message(FATAL_ERROR "Clang is not supported for MSP432E4") - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_VALENTYUSB_EPTRI) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/valentyusb/eptri/dcd_eptri.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_VALENTYUSB_EPTRI) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/valentyusb/eptri/dcd_eptri.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) endfunction() diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake index 4f5a945e8..c96882a75 100644 --- a/hw/bsp/gd32vf103/family.cmake +++ b/hw/bsp/gd32vf103/family.cmake @@ -15,34 +15,30 @@ set(FAMILY_MCUS GD32VF103 CACHE INTERNAL "") set(JLINK_IF jtag) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - if (NOT DEFINED LD_FILE_GNU) - message(FATAL_ERROR "LD_FILE_GNU is not defined") - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU - ${SOC_DIR}/Common/Source/GCC/startup_gd32vf103.S - ${SOC_DIR}/Common/Source/GCC/intexc_gd32vf103.S - ) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +message(FATAL_ERROR "LD_FILE_GNU is not defined") +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU +${SOC_DIR}/Common/Source/GCC/startup_gd32vf103.S +${SOC_DIR}/Common/Source/GCC/intexc_gd32vf103.S +) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_gd32vf103.c ${SOC_DIR}/Common/Source/Drivers/gd32vf103_rcu.c ${SOC_DIR}/Common/Source/Drivers/gd32vf103_gpio.c ${SOC_DIR}/Common/Source/Drivers/Usb/gd32vf103_usb_hw.c ${SOC_DIR}/Common/Source/Drivers/gd32vf103_usart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR}/NMSIS/Core/Include @@ -61,33 +57,17 @@ function(add_board_target BOARD_TARGET) -mcmodel=medlow -mstrict-align ) - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - message(FATAL_ERROR "Clang is not supported for MSP432E4") - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_GD32VF103) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${SOC_DIR}/Common/Source/Stubs/sbrk.c @@ -96,37 +76,32 @@ function(family_configure_example TARGET RTOS) ${SOC_DIR}/Common/Source/Stubs/fstat.c ${SOC_DIR}/Common/Source/Stubs/lseek.c ${SOC_DIR}/Common/Source/Stubs/read.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties( - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${SOC_DIR}/Common/Source/Stubs/sbrk.c - ${SOC_DIR}/Common/Source/Stubs/close.c - ${SOC_DIR}/Common/Source/Stubs/isatty.c - ${SOC_DIR}/Common/Source/Stubs/fstat.c - ${SOC_DIR}/Common/Source/Stubs/lseek.c - ${SOC_DIR}/Common/Source/Stubs/read.c - PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_GD32VF103) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 37acab06d..7e21dd946 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -16,29 +16,25 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS MIMXRT1XXX CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # LD_FILE and STARTUP_FILE can be defined in board.cmake - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx${MCU_CORE}_flexspi_nor.ld) - set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/iar/${MCU_VARIANT}xxxxx${MCU_CORE}_flexspi_nor.icf) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx${MCU_CORE}_flexspi_nor.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED LD_FILE_IAR) +set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/iar/${MCU_VARIANT}xxxxx${MCU_CORE}_flexspi_nor.icf) +endif () - if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT_WITH_CORE}.S) - set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/iar/startup_${MCU_VARIANT_WITH_CORE}.s) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT_WITH_CORE}.S) +set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/iar/startup_${MCU_VARIANT_WITH_CORE}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/clock_config.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/pin_mux.c ${SDK_DIR}/drivers/common/fsl_common.c @@ -88,9 +84,31 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c + ${TOP}/src/portable/ehci/ehci.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" -nostartfiles --specs=nosys.specs --specs=nano.specs @@ -99,52 +117,22 @@ function(add_board_target BOARD_TARGET) -Wl,-ug_boot_data ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" -Wl,-uimage_vector_table -Wl,-ug_boot_data ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC + target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}" ) endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - # Board target - add_board_target(board_${BOARD}) - - target_sources(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX) - target_sources(${TARGET} PRIVATE - ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c - ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c - ${TOP}/src/portable/ehci/ehci.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake index 426004b4e..2ec5522d3 100644 --- a/hw/bsp/kinetis_k/family.cmake +++ b/hw/bsp/kinetis_k/family.cmake @@ -18,21 +18,17 @@ set(FAMILY_MCUS KINETIS_K CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # LD_FILE and STARTUP_FILE can be defined in board.cmake - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ${SDK_DIR}/drivers/gpio/fsl_gpio.c ${SDK_DIR}/drivers/uart/fsl_uart.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c @@ -54,67 +50,51 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c + ${TOP}/src/portable/nxp/khci/hcd_khci.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c - ${TOP}/src/portable/nxp/khci/hcd_khci.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) - - if (DEFINED TEENSY_MCU) - family_flash_teensy(${TARGET}) - endif () + family_flash_teensy(${TARGET}) endfunction() diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake index 8e1b25a95..022ddb424 100644 --- a/hw/bsp/kinetis_k32l2/family.cmake +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -14,21 +14,17 @@ set(FAMILY_MCUS KINETIS_K32L CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # LD_FILE and STARTUP_FILE can be defined in board.cmake - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ${SDK_DIR}/drivers/gpio/fsl_gpio.c ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c @@ -49,67 +45,51 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K32L) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nxp/khci/dcd_khci.c + ${TOP}/src/portable/nxp/khci/hcd_khci.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K32L) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nxp/khci/dcd_khci.c - ${TOP}/src/portable/nxp/khci/hcd_khci.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_flash_jlink(${TARGET}) family_add_bin_hex(${TARGET}) - - if (DEFINED TEENSY_MCU) - family_flash_teensy(${TARGET}) - endif () + family_flash_teensy(${TARGET}) endfunction() diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 335e67375..2640652ab 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -18,20 +18,16 @@ set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # LD_FILE and STARTUP_FILE can be defined in board.cmake - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ${SDK_DIR}/drivers/gpio/fsl_gpio.c ${SDK_DIR}/drivers/lpsci/fsl_lpsci.c ${SDK_DIR}/drivers/uart/fsl_uart.c @@ -53,62 +49,49 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/drivers/uart ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c + ${TOP}/src/portable/nxp/khci/hcd_khci.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c - ${TOP}/src/portable/nxp/khci/hcd_khci.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc11/family.cmake b/hw/bsp/lpc11/family.cmake index 6781b20c6..506d76ed0 100644 --- a/hw/bsp/lpc11/family.cmake +++ b/hw/bsp/lpc11/family.cmake @@ -21,13 +21,9 @@ set(FAMILY_MCUS LPC11UXX CACHE INTERNAL "") # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/../gcc/cr_startup_lpc${LPC_FAMILY}.c + ${SDK_DIR}/src/chip_${LPC_FAMILY}.c ${SDK_DIR}/src/clock_${LPC_FAMILY}.c ${SDK_DIR}/src/iap.c @@ -47,25 +43,6 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_compile_options(${BOARD_TARGET} PUBLIC - -nostdlib - -Wno-error=incompatible-pointer-types - ) - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() @@ -74,16 +51,15 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC11UXX) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c + ${SDK_DIR}/../gcc/cr_startup_lpc${LPC_FAMILY}.c ) target_include_directories(${TARGET} PUBLIC # family, hw, board @@ -92,14 +68,24 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC11UXX) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${TARGET} PUBLIC + -nostdlib + -Wno-error=incompatible-pointer-types + ) + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc13/family.cmake b/hw/bsp/lpc13/family.cmake index 4ced216cb..5e6470b5f 100644 --- a/hw/bsp/lpc13/family.cmake +++ b/hw/bsp/lpc13/family.cmake @@ -18,11 +18,7 @@ set(FAMILY_MCUS LPC13XX CACHE INTERNAL "") # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/../gcc/cr_startup_lpc${LPC_FAMILY}.c ${SDK_DIR}/src/chip_${LPC_FAMILY}.c @@ -69,8 +65,6 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - # Board target - add_board_target(board_${BOARD}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -96,7 +90,6 @@ function(family_configure_example TARGET RTOS) target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) diff --git a/hw/bsp/lpc15/family.cmake b/hw/bsp/lpc15/family.cmake index f07044c24..589172132 100644 --- a/hw/bsp/lpc15/family.cmake +++ b/hw/bsp/lpc15/family.cmake @@ -18,11 +18,7 @@ set(FAMILY_MCUS LPC15XX CACHE INTERNAL "") # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/../gcc/cr_startup_lpc${LPC_FAMILY}.c ${SDK_DIR}/src/chip_${LPC_FAMILY}.c @@ -71,8 +67,6 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - # Board target - add_board_target(board_${BOARD}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -98,7 +92,6 @@ function(family_configure_example TARGET RTOS) target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) diff --git a/hw/bsp/lpc17/family.cmake b/hw/bsp/lpc17/family.cmake index 2cbb261ca..cd8b71110 100644 --- a/hw/bsp/lpc17/family.cmake +++ b/hw/bsp/lpc17/family.cmake @@ -17,11 +17,7 @@ set(FAMILY_MCUS LPC175X_6X CACHE INTERNAL "") # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/../gcc/cr_startup_lpc175x_6x.c ${SDK_DIR}/src/chip_17xx_40xx.c @@ -68,8 +64,6 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - # Board target - add_board_target(board_${BOARD}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -97,7 +91,6 @@ function(family_configure_example TARGET RTOS) ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 6af1149bf..655caee0e 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -17,11 +17,7 @@ set(FAMILY_MCUS LPC18XX CACHE INTERNAL "") # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/../gcc/cr_startup_lpc18xx.c ${SDK_DIR}/src/chip_18xx_43xx.c @@ -66,8 +62,6 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - # Board target - add_board_target(board_${BOARD}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -90,7 +84,6 @@ function(family_configure_example TARGET RTOS) ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c ${TOP}/src/portable/ehci/ehci.c ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index 21ed18057..d0e0bc9b1 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -17,11 +17,7 @@ set(FAMILY_MCUS LPC40XX CACHE INTERNAL "") # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/../gcc/cr_startup_lpc40xx.c ${SDK_DIR}/src/chip_17xx_40xx.c @@ -69,8 +65,6 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - # Board target - add_board_target(board_${BOARD}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -98,7 +92,6 @@ function(family_configure_example TARGET RTOS) ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index 23c4aecea..5c68aaebf 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -14,22 +14,18 @@ set(FAMILY_MCUS LPC43XX CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${SDK_DIR}/../gcc/cr_startup_lpc43xx.c) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${SDK_DIR}/../iar/iar_startup_lpc18xx43xx.s) - set(LD_FILE_IAR ${SDK_DIR}/../iar/linker/lpc18xx_43xx_ldscript_iflash.icf) +set(STARTUP_FILE_GNU ${SDK_DIR}/../gcc/cr_startup_lpc43xx.c) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${SDK_DIR}/../iar/iar_startup_lpc18xx43xx.s) +set(LD_FILE_IAR ${SDK_DIR}/../iar/linker/lpc18xx_43xx_ldscript_iflash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ${SDK_DIR}/src/chip_18xx_43xx.c ${SDK_DIR}/src/clock_18xx_43xx.c ${SDK_DIR}/src/fpu_init.c @@ -50,60 +46,49 @@ function(add_board_target BOARD_TARGET) update_board(${BOARD_TARGET}) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_compile_options(${BOARD_TARGET} PUBLIC - -nostdlib - -Wno-error=incompatible-pointer-types - ) - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) + # warning by LPCOpen + if (TOOLCHAIN STREQUAL "gcc" OR TOOLCHAIN STREQUAL "clang") + set_target_properties(${BOARD_TARGET} PROPERTIES COMPILE_FLAGS -Wno-error=incompatible-pointer-types) endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC43XX) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c + ${TOP}/src/portable/ehci/ehci.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC43XX) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c - ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c - ${TOP}/src/portable/ehci/ehci.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index 615fab6b8..9e128ab82 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -13,26 +13,22 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS LPC51 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}_flash.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}_flash.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} # driver ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c @@ -62,62 +58,48 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC51) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC51) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index 3a0de4648..3b16955da 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -20,26 +20,22 @@ endif() set(HOST_PORT $) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} # driver ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/common/fsl_common_arm.c @@ -90,68 +86,48 @@ function(add_board_target BOARD_TARGET) endif () update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC54) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - - # https://github.com/gsteiert/sct_neopixel/pull/1 - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c PROPERTIES - COMPILE_FLAGS "-Wno-unused-parameter") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC54) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 08c186ca1..6ebda4db9 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -20,26 +20,22 @@ endif() set(HOST_PORT $) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} # driver ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/common/fsl_common_arm.c @@ -88,67 +84,52 @@ function(add_board_target BOARD_TARGET) endif () update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC55) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - # external driver ${TOP}/lib/sct_neopixel/sct_neopixel.c + ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c - PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes -Wno-unused-parameter") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC55) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c + PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes -Wno-unused-parameter") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/maxim/family.cmake b/hw/bsp/maxim/family.cmake index cbfe7c84e..07171b8d5 100644 --- a/hw/bsp/maxim/family.cmake +++ b/hw/bsp/maxim/family.cmake @@ -38,26 +38,21 @@ else() endif() #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/GCC/startup_${MAX_DEVICE}.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MAX_DEVICE}.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/GCC/startup_${MAX_DEVICE}.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${MAX_DEVICE}.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) # Common add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/heap.c ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/system_${MAX_DEVICE}.c ${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_assert.c @@ -139,61 +134,49 @@ function(add_board_target BOARD_TARGET) -Wno-error=strict-prototypes ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${MAX_DEVICE_UPPER}) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/mentor/musb/dcd_musb.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${MAX_DEVICE_UPPER}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + endif () - # warnings caused by MSDK headers - target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes) - if (${MAX_DEVICE} STREQUAL "max78002") - target_compile_options(${TARGET} PRIVATE -Wno-error=redundant-decls) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + # warnings caused by MSDK headers + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes) + if (${MAX_DEVICE} STREQUAL "max78002") + target_compile_options(${TARGET} PRIVATE -Wno-error=redundant-decls) + endif () + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index a8f50773d..bff4c68a7 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -23,27 +23,22 @@ endif() set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) - endif() - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) +endif() +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} # driver ${SDK_DIR}/drivers/gpio/fsl_gpio.c ${SDK_DIR}/drivers/common/fsl_common_arm.c @@ -66,81 +61,62 @@ function(add_board_target BOARD_TARGET) ) if (${FAMILY_MCUS} STREQUAL "MCXN9") - target_sources(${BOARD_TARGET} PRIVATE - ${SDK_DIR}/drivers/lpflexcomm/fsl_lpflexcomm.c - ) - + ${SDK_DIR}/drivers/lpflexcomm/fsl_lpflexcomm.c + ) target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/drivers/lpflexcomm - ) + ${SDK_DIR}/drivers/lpflexcomm + ) elseif(${FAMILY_MCUS} STREQUAL "MCXA15") - - endif() update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - #-nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + if (${FAMILY_MCUS} STREQUAL "MCXN9") + family_add_tinyusb(${TARGET} OPT_MCU_MCXN9) + elseif(${FAMILY_MCUS} STREQUAL "MCXA15") + family_add_tinyusb(${TARGET} OPT_MCU_MCXA15) + endif() - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/chipidea/$ + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - if (${FAMILY_MCUS} STREQUAL "MCXN9") - family_add_tinyusb(${TARGET} OPT_MCU_MCXN9) - elseif(${FAMILY_MCUS} STREQUAL "MCXA15") - family_add_tinyusb(${TARGET} OPT_MCU_MCXA15) - endif() - - target_sources(${TARGET} PUBLIC - # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS - ${TOP}/src/portable/chipidea/$ - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + #-nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/mm32/family.cmake b/hw/bsp/mm32/family.cmake index d5e62a2da..20431e41c 100644 --- a/hw/bsp/mm32/family.cmake +++ b/hw/bsp/mm32/family.cmake @@ -14,28 +14,23 @@ set(FAMILY_MCUS MM32F327X CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${SDK_DIR}/Source/GCC_StartAsm/startup_${MCU_VARIANT}_gcc.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${SDK_DIR}/Source/IAR_StartAsm/startup_${MCU_VARIANT}_iar.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - # set(LD_FILE_IAR ) +set(STARTUP_FILE_GNU ${SDK_DIR}/Source/GCC_StartAsm/startup_${MCU_VARIANT}_gcc.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${SDK_DIR}/Source/IAR_StartAsm/startup_${MCU_VARIANT}_iar.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +# set(LD_FILE_IAR ) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/Source/system_${MCU_VARIANT}.c ${SDK_DIR}/HAL_Lib/Src/hal_gpio.c ${SDK_DIR}/HAL_Lib/Src/hal_rcc.c ${SDK_DIR}/HAL_Lib/Src/hal_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMSIS_5}/CMSIS/Core/Include @@ -44,61 +39,48 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MM32F327X) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MM32F327X) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/msp430/family.cmake b/hw/bsp/msp430/family.cmake index d9b4bf770..8b0dbeff4 100644 --- a/hw/bsp/msp430/family.cmake +++ b/hw/bsp/msp430/family.cmake @@ -15,11 +15,7 @@ set(FAMILY_MCUS MSP430x5xx CACHE INTERNAL "") # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} INTERFACE) target_compile_definitions(${BOARD_TARGET} INTERFACE CFG_TUD_ENDPOINT0_SIZE=8 @@ -32,17 +28,6 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} INTERFACE - "LINKER:--script=${LD_FILE_GNU}" - -L${SDK_DIR} - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} INTERFACE - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() @@ -51,16 +36,14 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) + family_add_tinyusb(${TARGET} OPT_MCU_MSP430x5xx) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c ) target_include_directories(${TARGET} PUBLIC # family, hw, board @@ -69,13 +52,16 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MSP430x5xx) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -L${SDK_DIR} + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () # Flashing family_add_bin_hex(${TARGET}) family_flash_msp430flasher(${TARGET}) diff --git a/hw/bsp/msp432e4/family.cmake b/hw/bsp/msp432e4/family.cmake index 62ab83866..582faad67 100644 --- a/hw/bsp/msp432e4/family.cmake +++ b/hw/bsp/msp432e4/family.cmake @@ -14,27 +14,23 @@ set(FAMILY_MCUS MSP432E4 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${SDK_DIR}/Source/${MCU_VARIANT}.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/Source/startup_${MCU_VARIANT}_gcc.S) - endif () - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${SDK_DIR}/Source/${MCU_VARIANT}.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) +set(STARTUP_FILE_GNU ${SDK_DIR}/Source/startup_${MCU_VARIANT}_gcc.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/Source/system_${MCU_VARIANT}.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR}/Include @@ -42,63 +38,49 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_compile_options(${BOARD_TARGET} PUBLIC - -mslow-flash-data - ) - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - message(FATAL_ERROR "Clang is not supported for MSP432E4") - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MSP432E4) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/mentor/musb/dcd_musb.c + ${TOP}/src/portable/mentor/musb/hcd_musb.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MSP432E4) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ${TOP}/src/portable/mentor/musb/hcd_musb.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${TARGET} PUBLIC + -mslow-flash-data + ) + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_msp430flasher(${TARGET}) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 3384aeaf3..dbc126a6e 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -27,14 +27,27 @@ endif () set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () +if (MCU_VARIANT STREQUAL nrf54h20) + set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT}_xxaa_application.ld) + set(STARTUP_FILE_GNU ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}_application.S) +elseif (MCU_VARIANT STREQUAL nrf5340) + set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT}_xxaa_application.ld) + set(STARTUP_FILE_GNU ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}_application.S) +else() + set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) + set(STARTUP_FILE_GNU ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}.S) +endif () + +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${LD_FILE_GNU_DEFAULT}) +endif () +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${NRFX_PATH}/helpers/nrfx_flag32_allocator.c ${NRFX_PATH}/drivers/src/nrfx_gpiote.c @@ -45,31 +58,21 @@ function(add_board_target BOARD_TARGET) ) if (MCU_VARIANT STREQUAL nrf54h20) - set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa_application.ld) target_sources(${BOARD_TARGET} PRIVATE ${NRFX_PATH}/mdk/system_nrf54h.c - ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}_application.S ) elseif (MCU_VARIANT STREQUAL nrf5340) - set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa_application.ld) target_sources(${BOARD_TARGET} PRIVATE ${NRFX_PATH}/mdk/system_${MCU_VARIANT}_application.c - ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}_application.S ${NRFX_PATH}/drivers/src/nrfx_usbreg.c ) target_compile_definitions(${BOARD_TARGET} PUBLIC NRF5340_XXAA_APPLICATION) else() - set(LD_FILE_GNU_DEFAULT ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) target_sources(${BOARD_TARGET} PRIVATE ${NRFX_PATH}/mdk/system_${MCU_VARIANT}.c - ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}.S ) endif () - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${LD_FILE_GNU_DEFAULT}) - endif () - string(TOUPPER ${MCU_VARIANT} MCU_VARIANT_UPPER) target_compile_definitions(${BOARD_TARGET} PUBLIC __STARTUP_CLEAR_BSS @@ -92,27 +95,8 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -L${NRFX_PATH}/mdk - --specs=nosys.specs --specs=nano.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -L${NRFX_PATH}/mdk - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ @@ -124,46 +108,48 @@ endfunction() # ) #endfunction() - function(family_configure_example TARGET RTOS) - # Board target - if (NOT RTOS STREQUAL zephyr) - add_board_target(board_${BOARD}) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - endif () - family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PRIVATE - # BSP + target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - if (RTOS STREQUAL zephyr AND DEFINED BOARD_ALIAS AND NOT BOARD STREQUAL BOARD_ALIAS) - target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD_ALIAS}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -L${NRFX_PATH}/mdk + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -L${NRFX_PATH}/mdk + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) endif () - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - target_sources(${TARGET} PRIVATE - ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing # family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/nuc100_120/family.cmake b/hw/bsp/nuc100_120/family.cmake index 06501b526..594d29cd0 100644 --- a/hw/bsp/nuc100_120/family.cmake +++ b/hw/bsp/nuc100_120/family.cmake @@ -11,19 +11,17 @@ set(OPENOCD_OPTION "-f interface/nulink.cfg -f target/numicroM0.cfg") set(FAMILY_MCUS NUC100 NUC120 CACHE INTERNAL "") -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC100Series/Source/GCC/startup_NUC100Series.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - +#------------------------------------ +# Startup & Linker script +#------------------------------------ +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC100Series/Source/GCC/startup_NUC100Series.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/Device/Nuvoton/NUC100Series/Source/system_NUC100Series.c ${SDK_DIR}/StdDriver/src/clk.c @@ -31,7 +29,6 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/StdDriver/src/sys.c ${SDK_DIR}/StdDriver/src/timer.c ${SDK_DIR}/StdDriver/src/uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC @@ -46,30 +43,20 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() +#------------------------------------ +# Functions +#------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - add_board_target(board_${BOARD}) + family_add_tinyusb(${TARGET} OPT_MCU_NUC120) target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nuvoton/nuc120/dcd_nuc120.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -77,11 +64,21 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - family_add_tinyusb(${TARGET} OPT_MCU_NUC120) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nuvoton/nuc120/dcd_nuc120.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/nuc121_125/family.cmake b/hw/bsp/nuc121_125/family.cmake index 5b95c9d9c..1eb581347 100644 --- a/hw/bsp/nuc121_125/family.cmake +++ b/hw/bsp/nuc121_125/family.cmake @@ -14,22 +14,16 @@ set(OPENOCD_OPTION "-f interface/nulink.cfg -f target/numicroM0.cfg") set(FAMILY_MCUS NUC121 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC121/Source/GCC/startup_NUC121.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) # Common sources for all NUC12x add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/Device/Nuvoton/NUC121/Source/system_NUC121.c @@ -38,7 +32,6 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/StdDriver/src/fmc.c ${SDK_DIR}/StdDriver/src/sys.c ${SDK_DIR}/StdDriver/src/timer.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC @@ -53,52 +46,43 @@ function(add_board_target BOARD_TARGET) CFG_EXAMPLE_MSC_READONLY ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_NUC121) - # Board target - add_board_target(board_${BOARD}) - - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nuvoton/nuc121/dcd_nuc121.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_NUC121) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nuvoton/nuc121/dcd_nuc121.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/nuc126/family.cmake b/hw/bsp/nuc126/family.cmake index 00725d725..3226406da 100644 --- a/hw/bsp/nuc126/family.cmake +++ b/hw/bsp/nuc126/family.cmake @@ -14,21 +14,16 @@ set(OPENOCD_OPTION "-f interface/nulink.cfg -f target/numicroM0.cfg") set(FAMILY_MCUS NUC126 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC126/Source/GCC/startup_NUC126.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC126/Source/GCC/startup_NUC126.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/Device/Nuvoton/NUC126/Source/system_NUC126.c ${SDK_DIR}/StdDriver/src/clk.c @@ -38,7 +33,6 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/StdDriver/src/sys.c ${SDK_DIR}/StdDriver/src/timer.c ${SDK_DIR}/StdDriver/src/uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC @@ -55,37 +49,20 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_NUC126) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nuvoton/nuc121/dcd_nuc121.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -93,12 +70,22 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_NUC126) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nuvoton/nuc121/dcd_nuc121.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/nuc505/family.cmake b/hw/bsp/nuc505/family.cmake index 8816ddbae..eb6048d5c 100644 --- a/hw/bsp/nuc505/family.cmake +++ b/hw/bsp/nuc505/family.cmake @@ -11,19 +11,17 @@ set(OPENOCD_OPTION "-f interface/nulink.cfg -f target/numicroM4.cfg") set(FAMILY_MCUS NUC505 CACHE INTERNAL "") -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC505Series/Source/GCC/startup_NUC505Series.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Startup & Linker script +#------------------------------------ +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/Device/Nuvoton/NUC505Series/Source/GCC/startup_NUC505Series.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/Device/Nuvoton/NUC505Series/Source/system_NUC505Series.c ${SDK_DIR}/StdDriver/src/adc.c @@ -40,7 +38,6 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/StdDriver/src/uart.c ${SDK_DIR}/StdDriver/src/wdt.c ${SDK_DIR}/StdDriver/src/wwdt.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC @@ -50,30 +47,18 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() + function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - add_board_target(board_${BOARD}) + family_add_tinyusb(${TARGET} OPT_MCU_NUC505) target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nuvoton/nuc505/dcd_nuc505.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -81,11 +66,22 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - family_add_tinyusb(${TARGET} OPT_MCU_NUC505) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nuvoton/nuc505/dcd_nuc505.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index bf6bcfb4a..c5b1d1a1a 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -38,129 +38,100 @@ endif () cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/startup.c - ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/system.c - ${FSP_RA}/src/bsp/mcu/all/bsp_clocks.c - ${FSP_RA}/src/bsp/mcu/all/bsp_common.c - ${FSP_RA}/src/bsp/mcu/all/bsp_delay.c - ${FSP_RA}/src/bsp/mcu/all/bsp_group_irq.c - ${FSP_RA}/src/bsp/mcu/all/bsp_guard.c - ${FSP_RA}/src/bsp/mcu/all/bsp_io.c - ${FSP_RA}/src/bsp/mcu/all/bsp_irq.c - ${FSP_RA}/src/bsp/mcu/all/bsp_register_protection.c - ${FSP_RA}/src/bsp/mcu/all/bsp_sbrk.c - ${FSP_RA}/src/bsp/mcu/all/bsp_security.c - ${FSP_RA}/src/r_ioport/r_ioport.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/common_data.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/pin_data.c - ) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/script/fsp.ld) +endif () - target_compile_options(${BOARD_TARGET} PUBLIC - -ffreestanding - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_cfg/fsp_cfg - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_cfg/fsp_cfg/bsp - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen - ${CMSIS_DIR}/CMSIS/Core/Include - ${FSP_RA}/inc - ${FSP_RA}/inc/api - ${FSP_RA}/inc/instances - ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Include - ${FSP_RA}/src/bsp/mcu/all - ${FSP_RA}/src/bsp/mcu/${MCU_VARIANT} - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_RHPORT=${RHPORT_DEVICE} - BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} - BOARD_TUH_RHPORT=${RHPORT_HOST} - BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} - ) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} STATIC + ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/startup.c + ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/system.c + ${FSP_RA}/src/bsp/mcu/all/bsp_clocks.c + ${FSP_RA}/src/bsp/mcu/all/bsp_common.c + ${FSP_RA}/src/bsp/mcu/all/bsp_delay.c + ${FSP_RA}/src/bsp/mcu/all/bsp_group_irq.c + ${FSP_RA}/src/bsp/mcu/all/bsp_guard.c + ${FSP_RA}/src/bsp/mcu/all/bsp_io.c + ${FSP_RA}/src/bsp/mcu/all/bsp_irq.c + ${FSP_RA}/src/bsp/mcu/all/bsp_register_protection.c + ${FSP_RA}/src/bsp/mcu/all/bsp_sbrk.c + ${FSP_RA}/src/bsp/mcu/all/bsp_security.c + ${FSP_RA}/src/r_ioport/r_ioport.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/common_data.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/pin_data.c + ) - update_board(${BOARD_TARGET}) - - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script/fsp.ld) - endif () - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - # linker file - "LINKER:--script=${LD_FILE_GNU}" - -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script - -Wl,--defsym=end=__bss_end__ - -nostartfiles - --specs=nano.specs --specs=nosys.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () - endif () -endfunction() + target_compile_options(${BOARD_TARGET} PUBLIC + -ffreestanding + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_cfg/fsp_cfg + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_cfg/fsp_cfg/bsp + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen + ${CMSIS_DIR}/CMSIS/Core/Include + ${FSP_RA}/inc + ${FSP_RA}/inc/api + ${FSP_RA}/inc/instances + ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Include + ${FSP_RA}/src/bsp/mcu/all + ${FSP_RA}/src/bsp/mcu/${MCU_VARIANT} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) + update_board(${BOARD_TARGET}) +endfunction() #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_RAXXX) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - # Explicitly added bsp_rom_registers here, otherwise MCU can be bricked if g_bsp_rom_registers is dropped by linker ${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c + ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c + ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c + ${TOP}/src/portable/renesas/rusb2/rusb2_common.c ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c PROPERTIES COMPILE_FLAGS "-Wno-undef") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ) - target_compile_options(${TARGET} PUBLIC - -Wno-error=undef - -Wno-error=strict-prototypes - ) - -# # RA has custom freertos port -# if (NOT TARGET freertos_kernel_port) -# add_library(freertos_kernel_port STATIC) -# target_sources(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port/port.c) -# target_include_directories(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port) -# -# target_link_libraries(freertos_kernel_port PUBLIC freertos_kernel) -# endif () - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_RAXXX) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c - ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c - ${TOP}/src/portable/renesas/rusb2/rusb2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + # linker file + "LINKER:--script=${LD_FILE_GNU}" + -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script + -Wl,--defsym=end=__bss_end__ + -nostartfiles + --specs=nano.specs --specs=nosys.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c PROPERTIES COMPILE_FLAGS "-Wno-undef") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () # Flashing family_flash_jlink(${TARGET}) diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake index e3dc23c35..6cfb8238b 100644 --- a/hw/bsp/samd11/family.cmake +++ b/hw/bsp/samd11/family.cmake @@ -14,29 +14,22 @@ set(FAMILY_MCUS SAMD11 CACHE INTERNAL "") set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -f target/at91samdXX.cfg") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c ${SDK_DIR}/hal/src/hal_atomic.c ${SDK_DIR}/hpl/gclk/hpl_gclk.c ${SDK_DIR}/hpl/pm/hpl_pm.c ${SDK_DIR}/hpl/sysctrl/hpl_sysctrl.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR} @@ -58,57 +51,44 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_SAMD11) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/microchip/samd/dcd_samd.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAMD11) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/microchip/samd/dcd_samd.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/samd2x_l2x/family.cmake b/hw/bsp/samd2x_l2x/family.cmake index 9f1b20800..091016e64 100644 --- a/hw/bsp/samd2x_l2x/family.cmake +++ b/hw/bsp/samd2x_l2x/family.cmake @@ -21,28 +21,21 @@ set(FAMILY_MCUS SAMD21 SAML2X CACHE INTERNAL "") set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -f target/at91samdXX.cfg") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) # Common sources for all SAM families set(COMMON_SOURCES ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c ${SDK_DIR}/hal/src/hal_atomic.c ${SDK_DIR}/hpl/gclk/hpl_gclk.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) # Family-specific sources @@ -89,48 +82,14 @@ function(add_board_target BOARD_TARGET) endif() update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - # Determine MCU option based on SAM_FAMILY if(SAM_FAMILY STREQUAL "samd21") set(MCU_OPTION OPT_MCU_SAMD21) @@ -141,22 +100,45 @@ function(family_configure_example TARGET RTOS) else() message(FATAL_ERROR "Unknown SAM_FAMILY: ${SAM_FAMILY}") endif() - - # Add TinyUSB target and port source family_add_tinyusb(${TARGET} ${MCU_OPTION}) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/microchip/samd/dcd_samd.c - ) - + ${TOP}/src/portable/microchip/samd/hcd_samd.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) # Add HCD support for SAMD21 (has host capability) if(SAM_FAMILY STREQUAL "samd21") target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samd/hcd_samd.c - ) + ) endif() - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/samd5x_e5x/family.cmake b/hw/bsp/samd5x_e5x/family.cmake index 516290593..d5de26244 100644 --- a/hw/bsp/samd5x_e5x/family.cmake +++ b/hw/bsp/samd5x_e5x/family.cmake @@ -13,22 +13,16 @@ set(FAMILY_MCUS SAMD51 SAME54 CACHE INTERNAL "") set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -c \"set CHIPNAME samd51\" -f target/atsame5x.cfg") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c ${SDK_DIR}/hal/src/hal_atomic.c @@ -36,7 +30,6 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/hpl/mclk/hpl_mclk.c ${SDK_DIR}/hpl/osc32kctrl/hpl_osc32kctrl.c ${SDK_DIR}/hpl/oscctrl/hpl_oscctrl.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR} @@ -50,56 +43,45 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_SAMD51) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/microchip/samd/dcd_samd.c + ${TOP}/src/portable/microchip/samd/hcd_samd.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAMD51) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/microchip/samd/dcd_samd.c - ${TOP}/src/portable/microchip/samd/hcd_samd.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/same7x/boards/same70_qmtech/board.h b/hw/bsp/same7x/boards/same70_qmtech/board.h index 0309e3e6c..09c2c93a9 100644 --- a/hw/bsp/same7x/boards/same70_qmtech/board.h +++ b/hw/bsp/same7x/boards/same70_qmtech/board.h @@ -46,7 +46,7 @@ extern "C" { #define BUTTON_PORT_CLOCK ID_PIOA #define UART_TX_PIN GPIO(GPIO_PORTB, 1) -#define UART_TX_FUNCTION MUX_PB1D_USART1_TXD1 +#define UART_TX_FUNCTION MUX_PB4D_USART1_TXD1 #define UART_RX_PIN GPIO(GPIO_PORTB, 0) #define UART_RX_FUNCTION MUX_PA21A_USART1_RXD1 #define UART_PORT_CLOCK ID_USART1 diff --git a/hw/bsp/same7x/family.cmake b/hw/bsp/same7x/family.cmake index a1eb197a3..cb11f21f3 100644 --- a/hw/bsp/same7x/family.cmake +++ b/hw/bsp/same7x/family.cmake @@ -11,28 +11,16 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS SAMX7X CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/same70b/gcc/gcc/startup_same70q21b.c) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - if (NOT DEFINED LD_FILE_Clang) - set(LD_FILE_Clang ${LD_FILE_GNU}) - endif () - - if (NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${LD_FILE_GNU}) - endif () - - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () +set(STARTUP_FILE_GNU ${SDK_DIR}/same70b/gcc/gcc/startup_same70q21b.c) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/same70b/gcc/system_same70q21b.c ${SDK_DIR}/hpl/core/hpl_init.c @@ -42,7 +30,6 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/hal/src/hal_io.c ${SDK_DIR}/hal/src/hal_atomic.c ${SDK_DIR}/hal/utils/src/utils_ringbuffer.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR} @@ -60,22 +47,6 @@ function(add_board_target BOARD_TARGET) update_board(${BOARD_TARGET}) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () - target_compile_options(${BOARD_TARGET} PUBLIC -Wno-error=unused-parameter -Wno-error=cast-align @@ -89,33 +60,37 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - - add_board_target(board_${BOARD}) + family_add_tinyusb(${TARGET} OPT_MCU_SAMX7X) target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/microchip/samx7x/dcd_samx7x.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - family_add_tinyusb(${TARGET} OPT_MCU_SAMX7X) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/microchip/samx7x/dcd_samx7x.c - ) - - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - target_compile_options(${TARGET} PUBLIC - -Wno-error=unused-parameter - -Wno-error=cast-align - -Wno-error=redundant-decls - -Wno-error=cast-qual - ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/samg/family.cmake b/hw/bsp/samg/family.cmake index eb00c8c52..6d7a6ba7f 100644 --- a/hw/bsp/samg/family.cmake +++ b/hw/bsp/samg/family.cmake @@ -14,29 +14,22 @@ set(FAMILY_MCUS SAMG CACHE INTERNAL "") set(OPENOCD_OPTION "-f board/atmel_samg55_xplained_pro.cfg") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") - endif () - - set(STARTUP_FILE_GNU ${SDK_DIR}/${SAM_FAMILY}/gcc/gcc/startup_${SAM_FAMILY}.c) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/${SAM_FAMILY}/gcc/gcc/startup_${SAM_FAMILY}.c) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/${SAM_FAMILY}/gcc/system_${SAM_FAMILY}.c ${SDK_DIR}/hal/src/hal_atomic.c ${SDK_DIR}/hpl/core/hpl_init.c ${SDK_DIR}/hpl/usart/hpl_usart.c ${SDK_DIR}/hpl/pmc/hpl_pmc.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -51,60 +44,46 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/hri ${SDK_DIR}/CMSIS/Core/Include ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_SAMG) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/microchip/samg/dcd_samg.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAMG) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/microchip/samg/dcd_samg.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index 85562d474..37b743654 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -18,22 +18,18 @@ set(FAMILY_MCUS STM32C0 CACHE INTERNAL "") set(OPENOCD_OPTION "-f interface/stlink.cfg -f target/stm32c0x.cfg") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -46,7 +42,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -59,62 +54,49 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32C0) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/typec/typec_stm32.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32C0) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ${TOP}/src/portable/st/typec/typec_stm32.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index 8d584a8e1..6f90f1a7a 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -18,22 +18,18 @@ set(FAMILY_MCUS STM32F0 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -43,7 +39,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -57,61 +52,48 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F0) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F0) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 72fe17482..f2acba3ff 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -18,24 +18,20 @@ set(FAMILY_MCUS STM32F1 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - endif () +#------------------------------------ +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED LD_FILE_IAR) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +endif () +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -44,7 +40,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -52,65 +47,50 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F1) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F1) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index 30ee23eb9..b08e93e3c 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -18,24 +18,20 @@ set(FAMILY_MCUS STM32F2 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - endif () +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED LD_FILE_IAR) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +endif () +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -44,7 +40,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -52,67 +47,52 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F2) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F2) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index b708c667f..b9aea10db 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -18,22 +18,18 @@ set(FAMILY_MCUS STM32F3 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -42,7 +38,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -54,61 +49,48 @@ function(add_board_target BOARD_TARGET) #target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F3) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F3) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index 18e8676c5..327bf7bf3 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -40,22 +40,18 @@ endif () cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -66,7 +62,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -82,63 +77,50 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F4) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F4) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 48c0edae6..2b9ca8cbb 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -40,22 +40,18 @@ endif () cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -68,7 +64,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -84,63 +79,50 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F7) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F7) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index d489a40b5..065ec3a0e 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -18,22 +18,18 @@ set(FAMILY_MCUS STM32G0 CACHE INTERNAL "") set(OPENOCD_OPTION "-f interface/stlink.cfg -f target/stm32g0x.cfg") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -46,7 +42,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -54,66 +49,51 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) -# target_compile_options(${BOARD_TARGET} PUBLIC) -# target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32G0) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/typec/typec_stm32.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32G0) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ${TOP}/src/portable/st/typec/typec_stm32.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 3a4c8ae32..f0c0e5549 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -18,22 +18,18 @@ set(FAMILY_MCUS STM32G4 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -44,7 +40,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -54,62 +49,49 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32G4) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/typec/typec_stm32.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32G4) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ${TOP}/src/portable/st/typec/typec_stm32.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index 1240901e8..7ad59dbd4 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -18,24 +18,20 @@ set(FAMILY_MCUS STM32H5 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - string(REPLACE "stm32h" "STM32H" MCU_VARIANT_UPPER ${MCU_VARIANT}) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +string(REPLACE "stm32h" "STM32H" MCU_VARIANT_UPPER ${MCU_VARIANT}) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -48,7 +44,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -58,62 +53,49 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32H5) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/typec/typec_stm32.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32H5) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ${TOP}/src/portable/st/typec/typec_stm32.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake index 02c6bf5fa..78a821298 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake @@ -15,7 +15,7 @@ if (NOT DEFINED RHPORT_HOST) endif() function(update_board TARGET) - target_sources(${TARGET} PUBLIC + target_sources(${TARGET} PRIVATE ${ST_MFXSTM32L152}/mfxstm32l152.c ${ST_MFXSTM32L152}/mfxstm32l152_reg.c ) diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index a1e49d1fd..840391e0b 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -41,24 +41,22 @@ endif () cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - set(LD_FILE_Clang ${LD_FILE_GNU}) - if(NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - endif() +set(LD_FILE_Clang ${LD_FILE_GNU}) +if(NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +endif() +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -73,7 +71,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -89,63 +86,42 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32H7) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32H7) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}") + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC -nostartfiles --specs=nosys.specs --specs=nano.specs) + endif () + + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h7rs/family.cmake b/hw/bsp/stm32h7rs/family.cmake index e67cabd4b..b1253d7fe 100644 --- a/hw/bsp/stm32h7rs/family.cmake +++ b/hw/bsp/stm32h7rs/family.cmake @@ -40,27 +40,23 @@ endif () cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - if(NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_flash.ld) - endif() - set(LD_FILE_Clang ${LD_FILE_GNU}) - if(NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - endif() +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +if(NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT}_flash.ld) +endif() +set(LD_FILE_Clang ${LD_FILE_GNU}) +if(NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +endif() +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -74,7 +70,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -92,61 +87,50 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32H7RS ${RTOS}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32H7RS ${RTOS}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index 3278d2645..4d24a21a6 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -18,22 +18,18 @@ set(FAMILY_MCUS STM32L0 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -43,7 +39,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -58,61 +53,48 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32L0) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32L0) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 8d44f2506..e89035e8b 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -18,22 +18,18 @@ set(FAMILY_MCUS STM32L4 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -46,7 +42,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -54,68 +49,53 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) -# target_compile_options(${BOARD_TARGET} PUBLIC) -# target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake index e1b8524bf..587ebc0fb 100644 --- a/hw/bsp/stm32n6/family.cmake +++ b/hw/bsp/stm32n6/family.cmake @@ -38,27 +38,23 @@ endif () cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - if(NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash.ld) - endif() - set(LD_FILE_Clang ${LD_FILE_GNU}) - if(NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - endif() +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +if(NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash.ld) +endif() +set(LD_FILE_Clang ${LD_FILE_GNU}) +if(NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +endif() +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}_fsbl.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -72,7 +68,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -90,62 +85,51 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32N6 ${RTOS}) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" -nostartfiles --specs=nosys.specs --specs=nano.specs ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_Clang}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC + target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}" ) endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32N6 ${RTOS}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32u0/family.cmake b/hw/bsp/stm32u0/family.cmake index 535b4716f..0c9d92fae 100644 --- a/hw/bsp/stm32u0/family.cmake +++ b/hw/bsp/stm32u0/family.cmake @@ -18,28 +18,24 @@ set(FAMILY_MCUS STM32U0 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - string(REPLACE "stm32u" "STM32U" MCU_VARIANT_UPPER ${MCU_VARIANT}) - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - endif () +string(REPLACE "stm32u" "STM32U" MCU_VARIANT_UPPER ${MCU_VARIANT}) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +endif () +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -50,7 +46,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -59,61 +54,48 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Inc ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32U0) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32U0) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index f1f9f6502..6bbeb1017 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -17,27 +17,23 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS STM32U5 CACHE INTERNAL "") +#------------------------------------ +# Startup & Linker script +#------------------------------------ +string(REPLACE "stm32u" "STM32U" MCU_VARIANT_UPPER ${MCU_VARIANT}) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + +if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) #------------------------------------ # BOARD_TARGET #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - string(REPLACE "stm32u" "STM32U" MCU_VARIANT_UPPER ${MCU_VARIANT}) - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -49,7 +45,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -58,65 +53,51 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Inc ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32U5) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32U5) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - #${TOP}/src/portable/st/typec/typec_stm32.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index e749e2fcc..461ce6ffd 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -18,25 +18,21 @@ set(FAMILY_MCUS STM32WB CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}_cm4.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}_cm4.s) - - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_cm4.ld) - endif() - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_cm4.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}_cm4.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}_cm4.s) +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_cm4.ld) +endif() +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_cm4.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -49,7 +45,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -57,65 +52,50 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) -# target_compile_options(${BOARD_TARGET} PUBLIC) -# target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32wba/family.cmake b/hw/bsp/stm32wba/family.cmake index 391989a6d..fab3d786b 100644 --- a/hw/bsp/stm32wba/family.cmake +++ b/hw/bsp/stm32wba/family.cmake @@ -27,27 +27,23 @@ set(RHPORT_DEVICE_SPEED OPT_MODE_HIGH_SPEED) set(RHPORT_HOST_SPEED OPT_MODE_HIGH_SPEED) #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - # STM32WBA HAL uses uppercase MCU_VARIANT (excluding the x's) for linking and lowercase MCU_VARIANT for startup. - string(TOUPPER "${MCU_VARIANT}" UPPERCASE_MCU_VARIANT) - string(REGEX REPLACE "X" "x" UPPERCASE_MCU_VARIANT "${UPPERCASE_MCU_VARIANT}") +# STM32WBA HAL uses uppercase MCU_VARIANT (excluding the x's) for linking and lowercase MCU_VARIANT for startup. +string(TOUPPER "${MCU_VARIANT}" UPPERCASE_MCU_VARIANT) +string(REGEX REPLACE "X" "x" UPPERCASE_MCU_VARIANT "${UPPERCASE_MCU_VARIANT}") - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${UPPERCASE_MCU_VARIANT}_FLASH_ns.ld) - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_ns.icf) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${UPPERCASE_MCU_VARIANT}_FLASH_ns.ld) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_ns.icf) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -62,7 +58,6 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pcd.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pcd_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_ll_usb.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -72,65 +67,50 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32WBA) - target_compile_definitions(${TARGET} PUBLIC - CFG_TUSB_MCU=OPT_MCU_STM32WBA - ) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32WBA) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index 7fe256fb6..936dcffa1 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -15,22 +15,18 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS TM4C123 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - set(LD_FILE_Clang ${LD_FILE_GNU}) - - set(STARTUP_FILE_GNU ${SDK_DIR}/Source/GCC/${MCU_VARIANT}_startup.c) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/Source/GCC/${MCU_VARIANT}_startup.c) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/Source/system_${MCU_VARIANT_UPPER}.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR}/Include/${MCU_VARIANT_UPPER} @@ -38,59 +34,49 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs --specs=nano.specs - -uvectors - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - message(FATAL_ERROR "Clang is not supported for MSP432E4") - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_TM4C123) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/mentor/musb/dcd_musb.c + ${TOP}/src/portable/mentor/musb/hcd_musb.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_TM4C123) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ${TOP}/src/portable/mentor/musb/hcd_musb.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_FLAGS "-Wno-cast-qual" + ) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/xmc4000/family.cmake b/hw/bsp/xmc4000/family.cmake index 594bd1116..ffce97a8c 100644 --- a/hw/bsp/xmc4000/family.cmake +++ b/hw/bsp/xmc4000/family.cmake @@ -12,19 +12,16 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS XMC4000 CACHE INTERNAL "") #------------------------------------ -# BOARD_TARGET +# Startup & Linker script #------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif() - - set(LD_FILE_Clang ${LD_FILE_GNU}) - - set(STARTUP_FILE_GNU ${SDK_DIR}/CMSIS/Infineon/COMPONENT_${MCU_VARIANT}/Source/TOOLCHAIN_GCC_ARM/startup_${MCU_VARIANT}.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +set(LD_FILE_Clang ${LD_FILE_GNU}) +set(STARTUP_FILE_GNU ${SDK_DIR}/CMSIS/Infineon/COMPONENT_${MCU_VARIANT}/Source/TOOLCHAIN_GCC_ARM/startup_${MCU_VARIANT}.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/CMSIS/Infineon/COMPONENT_${MCU_VARIANT}/Source/system_${MCU_VARIANT}.c ${SDK_DIR}/XMCLib/src/xmc_gpio.c @@ -32,7 +29,6 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/XMCLib/src/xmc4_scu.c ${SDK_DIR}/XMCLib/src/xmc_usic.c ${SDK_DIR}/XMCLib/src/xmc_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR}/CMSIS/Core/Include @@ -41,62 +37,49 @@ function(add_board_target BOARD_TARGET) ) update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - --specs=nosys.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - message(FATAL_ERROR "Clang is not supported for MSP432E4") - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endfunction() - #------------------------------------ # Functions #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_XMC4000) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") - endif () - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${SDK_DIR}/Newlib/syscalls.c + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC - # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_XMC4000) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c - ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) -- cgit v1.3.1 From bde449997e65ee866fa9e20c15bac0bd45efccf4 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Oct 2025 02:37:28 +0700 Subject: fix more build --- hw/bsp/lpc11/boards/lpcxpresso11u68/board.cmake | 2 +- hw/bsp/lpc11/family.cmake | 5 ++-- hw/bsp/lpc13/family.cmake | 14 ++------- hw/bsp/lpc15/family.cmake | 14 ++------- hw/bsp/lpc17/family.cmake | 18 +++-------- hw/bsp/lpc18/family.cmake | 18 +++-------- hw/bsp/lpc40/family.cmake | 18 +++-------- hw/bsp/nrf/family.cmake | 40 ++++++++++++++----------- 8 files changed, 42 insertions(+), 87 deletions(-) diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u68/board.cmake b/hw/bsp/lpc11/boards/lpcxpresso11u68/board.cmake index b7393cb2f..36296fb54 100644 --- a/hw/bsp/lpc11/boards/lpcxpresso11u68/board.cmake +++ b/hw/bsp/lpc11/boards/lpcxpresso11u68/board.cmake @@ -5,7 +5,7 @@ set(PYOCD_TARGET LPC11U68) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/lpc11u68.ld) function(update_board TARGET) - target_sources(${TARGET} PUBLIC + target_sources(${TARGET} PRIVATE ${SDK_DIR}/src/gpio_${LPC_FAMILY}.c ${SDK_DIR}/src/syscon_${LPC_FAMILY}.c ) diff --git a/hw/bsp/lpc11/family.cmake b/hw/bsp/lpc11/family.cmake index 506d76ed0..42578d403 100644 --- a/hw/bsp/lpc11/family.cmake +++ b/hw/bsp/lpc11/family.cmake @@ -23,7 +23,7 @@ set(FAMILY_MCUS LPC11UXX CACHE INTERNAL "") # only need to be built ONCE for all examples function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC - + ${SDK_DIR}/../gcc/cr_startup_lpc${LPC_FAMILY}.c ${SDK_DIR}/src/chip_${LPC_FAMILY}.c ${SDK_DIR}/src/clock_${LPC_FAMILY}.c ${SDK_DIR}/src/iap.c @@ -43,6 +43,8 @@ function(family_add_board BOARD_TARGET) ) update_board(${BOARD_TARGET}) + + set_target_properties(${BOARD_TARGET} PROPERTIES COMPILE_FLAGS "-Wno-incompatible-pointer-types") endfunction() @@ -59,7 +61,6 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c - ${SDK_DIR}/../gcc/cr_startup_lpc${LPC_FAMILY}.c ) target_include_directories(${TARGET} PUBLIC # family, hw, board diff --git a/hw/bsp/lpc13/family.cmake b/hw/bsp/lpc13/family.cmake index 5e6470b5f..6a66cfe95 100644 --- a/hw/bsp/lpc13/family.cmake +++ b/hw/bsp/lpc13/family.cmake @@ -64,14 +64,12 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC13XX) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") @@ -85,14 +83,6 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC13XX) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c - ) - - - # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc15/family.cmake b/hw/bsp/lpc15/family.cmake index 589172132..8de26421d 100644 --- a/hw/bsp/lpc15/family.cmake +++ b/hw/bsp/lpc15/family.cmake @@ -66,14 +66,12 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC15XX) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") @@ -87,14 +85,6 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC15XX) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c - ) - - - # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc17/family.cmake b/hw/bsp/lpc17/family.cmake index cd8b71110..92bcbff21 100644 --- a/hw/bsp/lpc17/family.cmake +++ b/hw/bsp/lpc17/family.cmake @@ -63,14 +63,14 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC175X_6X) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c + ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c + ${TOP}/src/portable/ohci/ohci.c ) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") @@ -84,16 +84,6 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC175X_6X) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c - ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c - ${TOP}/src/portable/ohci/ohci.c - ) - - - # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 655caee0e..27ee00f4c 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -61,14 +61,14 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c + ${TOP}/src/portable/ehci/ehci.c ) target_include_directories(${TARGET} PUBLIC # family, hw, board @@ -77,16 +77,6 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c - ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c - ${TOP}/src/portable/ehci/ehci.c - ) - - - # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index d0e0bc9b1..211846444 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -64,14 +64,14 @@ endfunction() #------------------------------------ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC40XX) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c + ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c + ${TOP}/src/portable/ohci/ohci.c ) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") @@ -85,16 +85,6 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC40XX) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c - ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c - ${TOP}/src/portable/ohci/ohci.c - ) - - - # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index dbc126a6e..0c19d2155 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -43,6 +43,7 @@ endif () if (NOT DEFINED LD_FILE_GNU) set(LD_FILE_GNU ${LD_FILE_GNU_DEFAULT}) endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) #------------------------------------ # Board Target @@ -112,14 +113,13 @@ function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - target_sources(${TARGET} PUBLIC + target_sources(${TARGET} PRIVATE ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -127,22 +127,26 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -L${NRFX_PATH}/mdk - --specs=nosys.specs --specs=nano.specs - -nostartfiles - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -L${NRFX_PATH}/mdk - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) + if (NOT RTOS STREQUAL zephyr) + target_sources(${TARGET} PRIVATE ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -L${NRFX_PATH}/mdk + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -L${NRFX_PATH}/mdk + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") -- cgit v1.3.1 From 7c95d9bed5b39730c449e321cc72c4e690b17a6c Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Oct 2025 16:59:04 +0700 Subject: force clang asm with -x assembler-with-cpp --- examples/build_system/cmake/toolchain/arm_clang.cmake | 2 ++ examples/build_system/cmake/toolchain/common.cmake | 6 +++++- hw/bsp/ch32v10x/family.cmake | 2 +- hw/bsp/lpc11/family.cmake | 2 +- 4 files changed, 9 insertions(+), 3 deletions(-) diff --git a/examples/build_system/cmake/toolchain/arm_clang.cmake b/examples/build_system/cmake/toolchain/arm_clang.cmake index fe3c2b453..dba637367 100644 --- a/examples/build_system/cmake/toolchain/arm_clang.cmake +++ b/examples/build_system/cmake/toolchain/arm_clang.cmake @@ -7,6 +7,8 @@ if (NOT DEFINED CMAKE_CXX_COMPILER) endif () set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) +set(TOOLCHAIN_ASM_FLAGS "-x assembler-with-cpp") + find_program(CMAKE_SIZE llvm-size) find_program(CMAKE_OBJCOPY llvm-objcopy) find_program(CMAKE_OBJDUMP llvm-objdump) diff --git a/examples/build_system/cmake/toolchain/common.cmake b/examples/build_system/cmake/toolchain/common.cmake index fa3034e6f..14449b01d 100644 --- a/examples/build_system/cmake/toolchain/common.cmake +++ b/examples/build_system/cmake/toolchain/common.cmake @@ -32,7 +32,6 @@ if (TOOLCHAIN STREQUAL "gcc" OR TOOLCHAIN STREQUAL "clang") -Wl,--gc-sections -Wl,--cref ) - elseif (TOOLCHAIN STREQUAL "iar") list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS --diag_suppress=Li065 @@ -48,5 +47,10 @@ foreach (LANG IN ITEMS C CXX ASM) #set(CMAKE_${LANG}_FLAGS_DEBUG_INIT "-O0") endforeach () +# Assembler +if (DEFINED TOOLCHAIN_ASM_FLAGS) + set(CMAKE_ASM_FLAGS_INIT "${CMAKE_ASM_FLAGS_INIT} ${TOOLCHAIN_ASM_FLAGS}") +endif () + # Linker list(JOIN TOOLCHAIN_EXE_LINKER_FLAGS " " CMAKE_EXE_LINKER_FLAGS_INIT) diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake index 1c9d41740..843b7f9d3 100644 --- a/hw/bsp/ch32v10x/family.cmake +++ b/hw/bsp/ch32v10x/family.cmake @@ -48,7 +48,7 @@ function(family_add_board BOARD_TARGET) update_board(${BOARD_TARGET}) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_compile_options(${TARGET} PUBLIC -mcmodel=medany) + target_compile_options(${BOARD_TARGET} PUBLIC -mcmodel=medany) endif() endfunction() diff --git a/hw/bsp/lpc11/family.cmake b/hw/bsp/lpc11/family.cmake index 42578d403..fceafcf61 100644 --- a/hw/bsp/lpc11/family.cmake +++ b/hw/bsp/lpc11/family.cmake @@ -79,7 +79,7 @@ function(family_configure_example TARGET RTOS) --specs=nosys.specs --specs=nano.specs ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") -- cgit v1.3.1 From 878c8f26c5c760ec683a8d4ee4aa1ee6678b8a12 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Oct 2025 09:58:46 +0700 Subject: enable IAR CState with IAR_CSTAT=1 --- .../build_system/cmake/toolchain/arm_iar.cmake | 8 + .../cmake/toolchain/cstat_sel_checks.txt | 247 +++++++++++++++++++++ hw/bsp/family_support.cmake | 36 +-- 3 files changed, 274 insertions(+), 17 deletions(-) create mode 100644 examples/build_system/cmake/toolchain/cstat_sel_checks.txt diff --git a/examples/build_system/cmake/toolchain/arm_iar.cmake b/examples/build_system/cmake/toolchain/arm_iar.cmake index 083815715..42b057020 100644 --- a/examples/build_system/cmake/toolchain/arm_iar.cmake +++ b/examples/build_system/cmake/toolchain/arm_iar.cmake @@ -14,4 +14,12 @@ find_program(CMAKE_SIZE size) find_program(CMAKE_OBJCOPY ielftool) find_program(CMAKE_OBJDUMP iefdumparm) +find_program(CMAKE_IAR_CSTAT icstat) +find_program(CMAKE_IAR_CHECKS ichecks) +find_program(CMAKE_IAR_REPORT ireport) + +if (IAR_CSTAT) +set(CMAKE_C_ICSTAT ${CMAKE_IAR_CSTAT} --checks=${CMAKE_CURRENT_LIST_DIR}/cstat_sel_checks.txt --db=${CMAKE_BINARY_DIR}/cstat.db --sarif_dir=${CMAKE_BINARY_DIR}/cstat_sarif) +endif () + include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) diff --git a/examples/build_system/cmake/toolchain/cstat_sel_checks.txt b/examples/build_system/cmake/toolchain/cstat_sel_checks.txt new file mode 100644 index 000000000..b7efba4ad --- /dev/null +++ b/examples/build_system/cmake/toolchain/cstat_sel_checks.txt @@ -0,0 +1,247 @@ +# IAR C-STAT Checks Manifest Handler V2.7.5.562 +# +MISRAC2012-Dir-4.3 +MISRAC2012-Dir-4.7_c +MISRAC2012-Dir-4.10 +MISRAC2012-Dir-4.11_a +MISRAC2012-Dir-4.11_b +MISRAC2012-Dir-4.11_c +MISRAC2012-Dir-4.11_d +MISRAC2012-Dir-4.11_e +MISRAC2012-Dir-4.11_f +MISRAC2012-Dir-4.11_g +MISRAC2012-Dir-4.11_h +MISRAC2012-Dir-4.11_i +MISRAC2012-Dir-4.12 +MISRAC2012-Dir-4.14_a +MISRAC2012-Dir-4.14_b +MISRAC2012-Dir-4.14_c +MISRAC2012-Dir-4.14_d +MISRAC2012-Dir-4.14_e +MISRAC2012-Dir-4.14_f +MISRAC2012-Dir-4.14_g +MISRAC2012-Dir-4.14_h +MISRAC2012-Dir-4.14_i +MISRAC2012-Dir-4.14_j +MISRAC2012-Dir-4.14_l +MISRAC2012-Dir-4.14_m +MISRAC2012-Dir-4.15 +MISRAC2012-Rule-1.3_a +MISRAC2012-Rule-1.3_b +MISRAC2012-Rule-1.3_c +MISRAC2012-Rule-1.3_d +MISRAC2012-Rule-1.3_e +MISRAC2012-Rule-1.3_f +MISRAC2012-Rule-1.3_g +MISRAC2012-Rule-1.3_h +MISRAC2012-Rule-1.3_i +MISRAC2012-Rule-1.3_j +MISRAC2012-Rule-1.3_k +MISRAC2012-Rule-1.3_l +MISRAC2012-Rule-1.3_m +MISRAC2012-Rule-1.3_n +MISRAC2012-Rule-1.3_o +MISRAC2012-Rule-1.3_p +MISRAC2012-Rule-1.3_q +MISRAC2012-Rule-1.3_r +MISRAC2012-Rule-1.3_s +MISRAC2012-Rule-1.3_t +MISRAC2012-Rule-1.3_u +MISRAC2012-Rule-1.3_v +MISRAC2012-Rule-1.4 +MISRAC2012-Rule-1.5_b +MISRAC2012-Rule-1.5_c +MISRAC2012-Rule-1.5_d +MISRAC2012-Rule-1.5_e +MISRAC2012-Rule-1.5_f +MISRAC2012-Rule-1.5_g +MISRAC2012-Rule-2.1_a +MISRAC2012-Rule-2.1_b +MISRAC2012-Rule-2.2_a +MISRAC2012-Rule-2.2_b +MISRAC2012-Rule-2.2_c +MISRAC2012-Rule-3.1 +MISRAC2012-Rule-3.2 +MISRAC2012-Rule-5.1 +MISRAC2012-Rule-5.2_c89 +MISRAC2012-Rule-5.2_c99 +MISRAC2012-Rule-5.3_c89 +MISRAC2012-Rule-5.3_c99 +MISRAC2012-Rule-5.4_c89 +MISRAC2012-Rule-5.4_c99 +MISRAC2012-Rule-5.5_c89 +MISRAC2012-Rule-5.5_c99 +MISRAC2012-Rule-5.6 +MISRAC2012-Rule-5.7 +MISRAC2012-Rule-5.8 +MISRAC2012-Rule-6.1 +MISRAC2012-Rule-6.2 +MISRAC2012-Rule-6.3 +MISRAC2012-Rule-7.1 +MISRAC2012-Rule-7.2 +MISRAC2012-Rule-7.3 +MISRAC2012-Rule-7.4_a +MISRAC2012-Rule-7.4_b +MISRAC2012-Rule-7.5 +MISRAC2012-Rule-7.6 +MISRAC2012-Rule-8.1 +MISRAC2012-Rule-8.2_a +MISRAC2012-Rule-8.2_b +MISRAC2012-Rule-8.3 +MISRAC2012-Rule-8.4 +MISRAC2012-Rule-8.5_a +MISRAC2012-Rule-8.5_b +MISRAC2012-Rule-8.10 +MISRAC2012-Rule-8.12 +MISRAC2012-Rule-8.14 +MISRAC2012-Rule-8.15 +MISRAC2012-Rule-9.1_a +MISRAC2012-Rule-9.1_b +MISRAC2012-Rule-9.1_d +MISRAC2012-Rule-9.1_e +MISRAC2012-Rule-9.2 +MISRAC2012-Rule-9.3 +MISRAC2012-Rule-9.4 +MISRAC2012-Rule-9.5_a +MISRAC2012-Rule-9.5_b +MISRAC2012-Rule-9.6 +MISRAC2012-Rule-9.7 +MISRAC2012-Rule-10.1_R2 +MISRAC2012-Rule-10.1_R3 +MISRAC2012-Rule-10.1_R4 +MISRAC2012-Rule-10.1_R5 +MISRAC2012-Rule-10.1_R6 +MISRAC2012-Rule-10.1_R7 +MISRAC2012-Rule-10.1_R8 +MISRAC2012-Rule-10.1_R10 +MISRAC2012-Rule-10.2 +MISRAC2012-Rule-10.3 +MISRAC2012-Rule-10.4_a +MISRAC2012-Rule-10.4_b +MISRAC2012-Rule-10.6 +MISRAC2012-Rule-10.7 +MISRAC2012-Rule-10.8 +MISRAC2012-Rule-11.1 +MISRAC2012-Rule-11.2 +MISRAC2012-Rule-11.3 +MISRAC2012-Rule-11.6 +MISRAC2012-Rule-11.7 +MISRAC2012-Rule-11.8 +MISRAC2012-Rule-11.9 +MISRAC2012-Rule-11.10 +MISRAC2012-Rule-12.2 +MISRAC2012-Rule-12.5 +MISRAC2012-Rule-12.6 +MISRAC2012-Rule-13.1 +MISRAC2012-Rule-13.2_a +MISRAC2012-Rule-13.2_b +MISRAC2012-Rule-13.2_c +MISRAC2012-Rule-13.5 +MISRAC2012-Rule-13.6 +MISRAC2012-Rule-14.1_a +MISRAC2012-Rule-14.1_b +MISRAC2012-Rule-14.2 +MISRAC2012-Rule-14.3_a +MISRAC2012-Rule-14.3_b +MISRAC2012-Rule-14.4_a +MISRAC2012-Rule-14.4_b +MISRAC2012-Rule-14.4_c +MISRAC2012-Rule-14.4_d +MISRAC2012-Rule-15.2 +MISRAC2012-Rule-15.3 +MISRAC2012-Rule-15.6_a +MISRAC2012-Rule-15.6_b +MISRAC2012-Rule-15.6_c +MISRAC2012-Rule-15.6_d +MISRAC2012-Rule-15.6_e +MISRAC2012-Rule-15.7 +MISRAC2012-Rule-16.1 +MISRAC2012-Rule-16.2 +MISRAC2012-Rule-16.3 +MISRAC2012-Rule-16.4 +MISRAC2012-Rule-16.5 +MISRAC2012-Rule-16.6 +MISRAC2012-Rule-16.7 +MISRAC2012-Rule-17.1 +MISRAC2012-Rule-17.2_a +MISRAC2012-Rule-17.2_b +MISRAC2012-Rule-17.3 +MISRAC2012-Rule-17.4 +MISRAC2012-Rule-17.5 +MISRAC2012-Rule-17.6 +MISRAC2012-Rule-17.7 +MISRAC2012-Rule-17.13 +MISRAC2012-Rule-18.1_a +MISRAC2012-Rule-18.1_b +MISRAC2012-Rule-18.1_c +MISRAC2012-Rule-18.1_d +MISRAC2012-Rule-18.2 +MISRAC2012-Rule-18.3 +MISRAC2012-Rule-18.4 +MISRAC2012-Rule-18.6_a +MISRAC2012-Rule-18.6_b +MISRAC2012-Rule-18.6_c +MISRAC2012-Rule-18.6_d +MISRAC2012-Rule-18.7 +MISRAC2012-Rule-18.8 +MISRAC2012-Rule-18.9 +MISRAC2012-Rule-18.10 +MISRAC2012-Rule-19.1 +MISRAC2012-Rule-20.2 +MISRAC2012-Rule-20.4_c89 +MISRAC2012-Rule-20.4_c99 +MISRAC2012-Rule-20.6_a +MISRAC2012-Rule-20.6_b +MISRAC2012-Rule-20.7 +MISRAC2012-Rule-21.1 +MISRAC2012-Rule-21.2 +MISRAC2012-Rule-21.3 +MISRAC2012-Rule-21.4 +MISRAC2012-Rule-21.5 +MISRAC2012-Rule-21.6 +MISRAC2012-Rule-21.7 +MISRAC2012-Rule-21.8 +MISRAC2012-Rule-21.9 +MISRAC2012-Rule-21.10 +MISRAC2012-Rule-21.12_a +MISRAC2012-Rule-21.12_b +MISRAC2012-Rule-21.12_c +MISRAC2012-Rule-21.13 +MISRAC2012-Rule-21.14 +MISRAC2012-Rule-21.15 +MISRAC2012-Rule-21.16 +MISRAC2012-Rule-21.17_a +MISRAC2012-Rule-21.17_b +MISRAC2012-Rule-21.17_c +MISRAC2012-Rule-21.17_d +MISRAC2012-Rule-21.17_e +MISRAC2012-Rule-21.17_f +MISRAC2012-Rule-21.18_a +MISRAC2012-Rule-21.18_b +MISRAC2012-Rule-21.19_a +MISRAC2012-Rule-21.19_b +MISRAC2012-Rule-21.20 +MISRAC2012-Rule-21.21 +MISRAC2012-Rule-21.22 +MISRAC2012-Rule-21.23 +MISRAC2012-Rule-21.24 +MISRAC2012-Rule-21.25 +MISRAC2012-Rule-22.1_a +MISRAC2012-Rule-22.1_b +MISRAC2012-Rule-22.2_a +MISRAC2012-Rule-22.2_b +MISRAC2012-Rule-22.2_c +MISRAC2012-Rule-22.3 +MISRAC2012-Rule-22.4 +MISRAC2012-Rule-22.5_a +MISRAC2012-Rule-22.5_b +MISRAC2012-Rule-22.6 +MISRAC2012-Rule-22.7_a +MISRAC2012-Rule-22.7_b +MISRAC2012-Rule-22.8 +MISRAC2012-Rule-22.9 +MISRAC2012-Rule-22.10 +MISRAC2012-Rule-23.2 +MISRAC2012-Rule-23.4 +MISRAC2012-Rule-23.6 +MISRAC2012-Rule-23.8 diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 7df1b154a..79a9f459b 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -238,8 +238,10 @@ function(family_configure_common TARGET RTOS) if (NOT RTOS STREQUAL zephyr) if (NOT TARGET ${BOARD_TARGET}) family_add_board(${BOARD_TARGET}) - set_target_properties(${BOARD_TARGET} PROPERTIES ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) - set_target_properties(${BOARD_TARGET} PROPERTIES SKIP_LINTING ON) + set_target_properties(${BOARD_TARGET} PROPERTIES + ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib + SKIP_LINTING ON # need cmake 4.2 + ) endif () target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET}) endif () @@ -273,9 +275,7 @@ function(family_configure_common TARGET RTOS) target_sources(${TARGET} PUBLIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c) target_include_directories(${TARGET} PUBLIC ${TOP}/lib/SEGGER_RTT/RTT) # target_compile_definitions(${TARGET} PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) - set_source_files_properties(${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c PROPERTIES - SKIP_LINTING ON - ) + set_source_files_properties(${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c PROPERTIES SKIP_LINTING ON) endif () else () target_compile_definitions(${TARGET} PUBLIC LOGGER_UART) @@ -291,18 +291,20 @@ function(family_configure_common TARGET RTOS) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${TARGET} PUBLIC "LINKER:--map=$.map") - # link time analysis with C-STAT -# add_custom_command(TARGET ${TARGET} POST_BUILD -# COMMAND ${CMAKE_C_ICSTAT} -# --db=${CMAKE_BINARY_DIR}/cstat.db -# link_analyze -- ${CMAKE_LINKER} $ -# COMMAND_EXPAND_LISTS -# ) -# # generate C-STAT report -# add_custom_command(TARGET ${TARGET} POST_BUILD -# COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/cstat_report -# COMMAND ireport --db=${CMAKE_BINARY_DIR}/cstat.db --full --project ${TARGET} --output ${CMAKE_CURRENT_BINARY_DIR}/cstat_report/${TARGET}.html -# ) + if (IAR_CSTAT) + # link time analysis with C-STAT + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${CMAKE_C_ICSTAT} + --db=${CMAKE_BINARY_DIR}/cstat.db + link_analyze -- ${CMAKE_LINKER} $ + COMMAND_EXPAND_LISTS + ) + # generate C-STAT report + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/cstat_report + COMMAND ireport --db=${CMAKE_BINARY_DIR}/cstat.db --full --project ${TARGET} --output ${CMAKE_CURRENT_BINARY_DIR}/cstat_report/index.html + ) + endif () endif () # run size after build -- cgit v1.3.1 From f39dcae9f1bed1dfcfb239f76677ef980a9976c9 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Oct 2025 13:04:49 +0700 Subject: fix several warnings --- .../audio_4_channel_mic/src/usb_descriptors.c | 2 +- .../src/usb_descriptors.c | 2 +- examples/device/audio_test/src/usb_descriptors.c | 2 +- .../audio_test_freertos/src/usb_descriptors.c | 2 +- .../audio_test_multi_rate/src/usb_descriptors.c | 2 +- .../device/cdc_dual_ports/src/usb_descriptors.c | 10 ++++---- examples/device/cdc_msc/src/main.c | 19 +++++++++----- examples/device/cdc_msc/src/msc_disk.c | 6 +++-- examples/device/cdc_msc/src/usb_descriptors.c | 12 ++++----- examples/device/cdc_msc_freertos/src/msc_disk.c | 2 +- .../device/cdc_msc_freertos/src/usb_descriptors.c | 12 ++++----- examples/device/cdc_uac2/src/usb_descriptors.c | 12 ++++----- examples/device/dfu/src/usb_descriptors.c | 4 +-- examples/device/dfu_runtime/src/usb_descriptors.c | 4 +-- .../device/dynamic_configuration/src/msc_disk.c | 2 +- .../dynamic_configuration/src/usb_descriptors.c | 2 +- .../hid_boot_interface/src/usb_descriptors.c | 4 +-- .../device/hid_composite/src/usb_descriptors.c | 8 +++--- .../hid_composite_freertos/src/usb_descriptors.c | 8 +++--- .../device/hid_generic_inout/src/usb_descriptors.c | 4 +-- .../hid_multiple_interface/src/usb_descriptors.c | 4 +-- examples/device/midi_test/src/usb_descriptors.c | 8 +++--- .../midi_test_freertos/src/usb_descriptors.c | 8 +++--- examples/device/msc_dual_lun/src/usb_descriptors.c | 8 +++--- examples/device/mtp/src/usb_descriptors.c | 10 ++++---- .../net_lwip_webserver/src/usb_descriptors.c | 2 +- examples/device/uac2_headset/src/usb_descriptors.c | 4 +-- .../device/uac2_speaker_fb/src/usb_descriptors.c | 4 +-- examples/device/usbtmc/src/usb_descriptors.c | 29 +++++++++++++++++----- .../device/video_capture/src/usb_descriptors.c | 4 +-- .../device/video_capture_2ch/src/usb_descriptors.c | 4 +-- .../device/webusb_serial/src/usb_descriptors.c | 4 +-- .../host_hid_to_device_cdc/src/usb_descriptors.c | 10 ++++---- .../host_info_to_device_cdc/src/usb_descriptors.c | 10 ++++---- hw/bsp/board.c | 16 +++--------- hw/bsp/stm32h7/boards/stm32h743eval/board.h | 2 +- src/common/tusb_common.h | 2 +- src/common/tusb_debug.h | 12 +++++---- src/osal/osal.h | 13 +++++----- 39 files changed, 145 insertions(+), 128 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 728a5f9ce..c8abf491d 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c index 728a5f9ce..c8abf491d 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index 9864377f6..5e448002d 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/audio_test_freertos/src/usb_descriptors.c b/examples/device/audio_test_freertos/src/usb_descriptors.c index 9864377f6..5e448002d 100644 --- a/examples/device/audio_test_freertos/src/usb_descriptors.c +++ b/examples/device/audio_test_freertos/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index f50e70a25..e54af14fb 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -41,7 +41,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index bbcb479f5..6b3963814 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -127,7 +127,7 @@ enum { #define EPNUM_CDC_1_IN 0x84 #endif -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -140,7 +140,7 @@ uint8_t const desc_fs_configuration[] = { #if TUD_OPT_HIGH_SPEED // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -152,7 +152,7 @@ uint8_t const desc_hs_configuration[] = { }; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -213,7 +213,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 4e7aa989e..c4606528a 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -42,6 +42,7 @@ enum { }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; +static bool blink_enable = true; void led_blinking_task(void); void cdc_task(void); @@ -135,11 +136,13 @@ void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { (void) itf; (void) rts; - // TODO set some indicator if (dtr) { // Terminal connected + blink_enable = false; + board_led_write(true); } else { // Terminal disconnected + blink_enable = true; } } @@ -155,10 +158,14 @@ void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; - // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time - start_ms += blink_interval_ms; + if (blink_enable) { + // Blink every interval ms + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } + start_ms += blink_interval_ms; - board_led_write(led_state); - led_state = 1 - led_state; // toggle + board_led_write(led_state); + led_state = !led_state; + } } diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 6c112aa8b..9a43d321e 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -48,7 +48,7 @@ enum { #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { +static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; // sector_per_cluster = 1; reserved_sectors = 1; @@ -213,7 +213,9 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t * (void) lun; // out of ramdisk - if (lba >= DISK_BLOCK_NUM) return -1; + if (lba >= DISK_BLOCK_NUM) { + return -1; + } #ifndef CFG_EXAMPLE_MSC_READONLY uint8_t *addr = msc_disk[lba] + offset; diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 597a6b1e6..4fe03f90e 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -125,7 +125,7 @@ enum { #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) // full speed configuration -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -140,7 +140,7 @@ uint8_t const desc_fs_configuration[] = { // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -152,10 +152,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, @@ -223,7 +223,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 38345ca4d..996be738d 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -79,7 +79,7 @@ enum { #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index cb440c209..bcfef48a7 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -124,7 +124,7 @@ enum { #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) -uint8_t const desc_fs_configuration[] = +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -140,7 +140,7 @@ uint8_t const desc_fs_configuration[] = // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -153,10 +153,10 @@ uint8_t const desc_hs_configuration[] = }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, @@ -225,7 +225,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/cdc_uac2/src/usb_descriptors.c b/examples/device/cdc_uac2/src/usb_descriptors.c index da55bdb5a..748c36b7b 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.c +++ b/examples/device/cdc_uac2/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -116,7 +116,7 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_CDC_IN 0x84 #endif -uint8_t const desc_fs_configuration[] = +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -132,7 +132,7 @@ uint8_t const desc_fs_configuration[] = // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -144,10 +144,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = 0x0100, @@ -215,7 +215,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index fd469aaf2..1550b70b8 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -126,7 +126,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c index 7ac53d255..c5cc9f92f 100644 --- a/examples/device/dfu_runtime/src/usb_descriptors.c +++ b/examples/device/dfu_runtime/src/usb_descriptors.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -122,7 +122,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index e57f9e3f3..95bf8e45f 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -46,7 +46,7 @@ enum #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 0a2049288..7660e59dd 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -202,7 +202,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index d68ef16d9..d9ce4ef09 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -140,7 +140,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index ce7fbd13f..7b1f4f8d8 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -43,7 +43,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -120,10 +120,10 @@ uint8_t const desc_configuration[] = // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, @@ -188,7 +188,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index 3f231fecc..1d703beff 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -43,7 +43,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -119,10 +119,10 @@ uint8_t const desc_configuration[] = // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, @@ -185,7 +185,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index 64f6d17ae..1b5c055e6 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -130,7 +130,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_multiple_interface/src/usb_descriptors.c b/examples/device/hid_multiple_interface/src/usb_descriptors.c index 86f567e8e..145836300 100644 --- a/examples/device/hid_multiple_interface/src/usb_descriptors.c +++ b/examples/device/hid_multiple_interface/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -146,7 +146,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index 384742ae8..8cb235d30 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = 0x0200, @@ -98,7 +98,7 @@ enum { #define EPNUM_MIDI_IN 0x81 #endif -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -107,7 +107,7 @@ uint8_t const desc_fs_configuration[] = { }; #if TUD_OPT_HIGH_SPEED -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -143,7 +143,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/midi_test_freertos/src/usb_descriptors.c b/examples/device/midi_test_freertos/src/usb_descriptors.c index 384742ae8..8cb235d30 100644 --- a/examples/device/midi_test_freertos/src/usb_descriptors.c +++ b/examples/device/midi_test_freertos/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = 0x0200, @@ -98,7 +98,7 @@ enum { #define EPNUM_MIDI_IN 0x81 #endif -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -107,7 +107,7 @@ uint8_t const desc_fs_configuration[] = { }; #if TUD_OPT_HIGH_SPEED -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -143,7 +143,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index efb9a966d..e3a0753b5 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -103,7 +103,7 @@ enum #endif -uint8_t const desc_fs_configuration[] = +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -113,7 +113,7 @@ uint8_t const desc_fs_configuration[] = }; #if TUD_OPT_HIGH_SPEED -uint8_t const desc_hs_configuration[] = +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -151,7 +151,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/mtp/src/usb_descriptors.c b/examples/device/mtp/src/usb_descriptors.c index 80345d8f8..ff35e0df3 100644 --- a/examples/device/mtp/src/usb_descriptors.c +++ b/examples/device/mtp/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -121,7 +121,7 @@ const uint8_t desc_fs_configuration[] = { // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP event, EP event size, EP event polling, EP Out & EP In address, EP size @@ -129,10 +129,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, @@ -198,7 +198,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUsb", // 1: Manufacturer diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index cd800f521..57ee3a218 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -68,7 +68,7 @@ enum //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index fc12c122e..d2f4f45b3 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -41,7 +41,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -141,7 +141,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.c b/examples/device/uac2_speaker_fb/src/usb_descriptors.c index ee1b92225..cc904031b 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.c +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.c @@ -45,7 +45,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -230,7 +230,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/usbtmc/src/usb_descriptors.c b/examples/device/usbtmc/src/usb_descriptors.c index 85acd990a..d03c64102 100644 --- a/examples/device/usbtmc/src/usb_descriptors.c +++ b/examples/device/usbtmc/src/usb_descriptors.c @@ -44,7 +44,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -112,7 +112,7 @@ enum #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_USBTMC_DESC_LEN) -uint8_t const desc_fs_configuration[] = +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -122,7 +122,7 @@ uint8_t const desc_fs_configuration[] = #if TUD_OPT_HIGH_SPEED -uint8_t const desc_hs_configuration[] = +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -131,10 +131,10 @@ uint8_t const desc_hs_configuration[] = }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, @@ -158,6 +158,23 @@ uint8_t const* tud_descriptor_device_qualifier_cb(void) return (uint8_t const*) &desc_device_qualifier; } +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) { + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + // Note: the descriptor type is OTHER_SPEED_CONFIG instead of CONFIG + memcpy(desc_other_speed_config, + (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration, + CONFIG_TOTAL_LEN); + + desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG; + + return desc_other_speed_config; +} + #endif // Invoked when received GET CONFIGURATION DESCRIPTOR @@ -187,7 +204,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index b3e19b0f0..775386c65 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -63,7 +63,7 @@ char const* string_desc_arr[] = { //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -384,7 +384,7 @@ static uint8_t * get_hs_configuration_desc(void) { } // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, diff --git a/examples/device/video_capture_2ch/src/usb_descriptors.c b/examples/device/video_capture_2ch/src/usb_descriptors.c index e78e452fc..03fac2d5c 100644 --- a/examples/device/video_capture_2ch/src/usb_descriptors.c +++ b/examples/device/video_capture_2ch/src/usb_descriptors.c @@ -68,7 +68,7 @@ char const* string_desc_arr[] = { //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -551,7 +551,7 @@ static uint8_t * get_hs_configuration_desc(void) { } // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 2b69a5b56..044a6b294 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -228,7 +228,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c index b7cffe23d..c2377cb00 100644 --- a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -122,7 +122,7 @@ enum { #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN) // full speed configuration -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -134,7 +134,7 @@ uint8_t const desc_fs_configuration[] = { // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -143,10 +143,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, diff --git a/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c index b7cffe23d..c2377cb00 100644 --- a/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -122,7 +122,7 @@ enum { #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN) // full speed configuration -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -134,7 +134,7 @@ uint8_t const desc_fs_configuration[] = { // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -143,10 +143,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 41e6eb1b8..476ec6733 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -51,7 +51,7 @@ int sys_read(int fhdl, char *buf, size_t count) TU_ATTR_USED; int sys_write(int fhdl, const char *buf, size_t count) { (void) fhdl; - SEGGER_RTT_Write(0, (const char *) buf, (int) count); + SEGGER_RTT_Write(0, buf, (int) count); return (int) count; } @@ -111,16 +111,6 @@ int sys_read (int fhdl, char *buf, size_t count) { #endif -//int _close(int fhdl) { -// (void) fhdl; -// return 0; -//} - -//int _fstat(int file, struct stat *st) { -// memset(st, 0, sizeof(*st)); -// st->st_mode = S_IFCHR; -//} - // Clang use picolibc #if defined(__clang__) static int cl_putc(char c, FILE *f) { @@ -147,8 +137,8 @@ TU_ATTR_WEAK size_t board_get_unique_id(uint8_t id[], size_t max_len) { (void) max_len; // fixed serial string is 01234567889ABCDEF uint32_t* uid32 = (uint32_t*) (uintptr_t)id; - uid32[0] = 0x67452301; - uid32[1] = 0xEFCDAB89; + uid32[0] = 0x67452301u; + uid32[1] = 0xEFCDAB89u; return 8; } diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index cfffc7770..96bfc24e1 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -61,7 +61,7 @@ static board_pindef_t board_pindef[] = { { // LED .port = GPIOA, .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, - .active_state = 1 + .active_state = 0 }, { // Button .port = GPIOC, diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 50c1be2c6..dfa9299c1 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -131,7 +131,7 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, c } // For memcpy, src may be NULL only if count == 0. Reject otherwise. - if (src == NULL && count != 0) { + if (src == NULL && count != 0u) { return -1; } diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 1d0c6f1ad..86517b9c9 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -58,8 +58,10 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); #define tu_printf printf #endif -static inline void tu_print_buf(uint8_t const* buf, uint32_t bufsize) { - for(uint32_t i=0; icount; i++) { - if (p_table->items[i].key == key) { return p_table->items[i].data; } + if (p_table->items[i].key == key) { + return p_table->items[i].data; + } } // not found return the key value in hex @@ -130,8 +134,6 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 #define TU_LOG_FAILED() #endif -// TODO replace all TU_LOGn with TU_LOG(n) - #define TU_LOG0(...) #define TU_LOG0_MEM(...) #define TU_LOG0_BUF(...) diff --git a/src/osal/osal.h b/src/osal/osal.h index a33280425..8faa81b07 100644 --- a/src/osal/osal.h +++ b/src/osal/osal.h @@ -71,10 +71,9 @@ typedef void (*osal_task_func_t)( void * ); #error OS is not supported yet #endif -//--------------------------------------------------------------------+ -// OSAL Porting API -// Should be implemented as static inline function in osal_port.h header -/* +/*-------------------------------------------------------------------- + OSAL Porting API + Should be implemented as static inline function in osal_port.h header void osal_spin_init(osal_spinlock_t *ctx); void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr); @@ -83,7 +82,7 @@ typedef void (*osal_task_func_t)( void * ); bool osal_semaphore_delete(osal_semaphore_t semd_hdl); bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr); bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec); - void osal_semaphore_reset(osal_semaphore_t sem_hdl); // TODO removed + void osal_semaphore_reset(osal_semaphore_t sem_hdl); osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef); bool osal_mutex_delete(osal_mutex_t mutex_hdl) @@ -95,8 +94,8 @@ typedef void (*osal_task_func_t)( void * ); bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec); bool osal_queue_send(osal_queue_t qhdl, void const * data, bool in_isr); bool osal_queue_empty(osal_queue_t qhdl); -*/ -//--------------------------------------------------------------------+ +--------------------------------------------------------------------------*/ + #ifdef __cplusplus } -- cgit v1.3.1 From 55c6d07af314627c55d595cc74d0d7694ce6f091 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Oct 2025 14:28:59 +0700 Subject: fix more warnings --- hw/bsp/board_api.h | 6 ++++-- hw/bsp/samd5x_e5x/family.c | 2 +- hw/bsp/stm32f4/family.c | 2 +- hw/bsp/stm32f7/family.c | 2 +- hw/bsp/stm32h7/family.c | 4 ++-- hw/bsp/stm32h7rs/family.c | 2 +- hw/bsp/stm32n6/family.c | 2 +- src/common/tusb_types.h | 8 ++++---- src/device/dcd.h | 2 +- src/osal/osal.h | 2 +- src/osal/osal_none.h | 4 ++-- src/portable/synopsys/dwc2/dcd_dwc2.c | 6 +++--- src/tusb.c | 8 ++++++-- src/tusb_option.h | 10 +++++----- 14 files changed, 33 insertions(+), 27 deletions(-) diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 5ecd7797a..80d86a4aa 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -154,11 +154,13 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars // TODO work with make, but not working with esp32s3 cmake uid_len = board_get_unique_id(uid, sizeof(uid)); - if ( uid_len > max_chars / 2 ) uid_len = max_chars / 2; + if ( uid_len > max_chars / 2u ) { + uid_len = max_chars / 2u; + } for ( size_t i = 0; i < uid_len; i++ ) { for ( size_t j = 0; j < 2; j++ ) { - const char nibble_to_hex[16] = { + const unsigned char nibble_to_hex[16] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; diff --git a/hw/bsp/samd5x_e5x/family.c b/hw/bsp/samd5x_e5x/family.c index d53aa00d6..df6f19d0f 100644 --- a/hw/bsp/samd5x_e5x/family.c +++ b/hw/bsp/samd5x_e5x/family.c @@ -179,7 +179,7 @@ size_t board_get_unique_id(uint8_t id[], size_t max_len) { for (int i = 0; i < 4; i++) { uint32_t did = *((uint32_t const*) did_addr[i]); did = TU_BSWAP32(did); // swap endian to match samd51 uf2 bootloader - memcpy(id + i * 4, &did, 4); + memcpy(id + i * 4, &did, sizeof(uint32_t)); } return 16; diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 260927903..6e02b0575 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -54,7 +54,7 @@ void OTG_HS_IRQHandler(void) { // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ #ifdef UART_DEV -UART_HandleTypeDef UartHandle = { +static UART_HandleTypeDef UartHandle = { .Instance = UART_DEV, .Init = { .BaudRate = CFG_BOARD_UART_BAUDRATE, diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index bf2d28e42..38dfaa3bc 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -46,7 +46,7 @@ typedef struct { //--------------------------------------------------------------------+ #ifdef UART_DEV -UART_HandleTypeDef UartHandle = { +static UART_HandleTypeDef UartHandle = { .Instance = UART_DEV, .Init = { .BaudRate = CFG_BOARD_UART_BAUDRATE, diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 4f80b15ff..7b618b2e4 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -49,7 +49,7 @@ typedef struct { //--------------------------------------------------------------------+ #ifdef UART_DEV -UART_HandleTypeDef UartHandle = { +static UART_HandleTypeDef UartHandle = { .Instance = UART_DEV, .Init = { .BaudRate = CFG_BOARD_UART_BAUDRATE, @@ -127,7 +127,7 @@ void board_init(void) { #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); + SysTick_Config(SystemCoreClock / 1000u); #elif CFG_TUSB_OS == OPT_OS_FREERTOS // Explicitly disable systick to prevent its ISR runs before scheduler start diff --git a/hw/bsp/stm32h7rs/family.c b/hw/bsp/stm32h7rs/family.c index 80ac81125..6192f7a40 100644 --- a/hw/bsp/stm32h7rs/family.c +++ b/hw/bsp/stm32h7rs/family.c @@ -49,7 +49,7 @@ typedef struct { //--------------------------------------------------------------------+ #ifdef UART_DEV -UART_HandleTypeDef UartHandle = { +static UART_HandleTypeDef UartHandle = { .Instance = UART_DEV, .Init = { .BaudRate = CFG_BOARD_UART_BAUDRATE, diff --git a/hw/bsp/stm32n6/family.c b/hw/bsp/stm32n6/family.c index 1d0616d8e..58be4867d 100644 --- a/hw/bsp/stm32n6/family.c +++ b/hw/bsp/stm32n6/family.c @@ -62,7 +62,7 @@ typedef struct { //--------------------------------------------------------------------+ #ifdef UART_DEV -UART_HandleTypeDef UartHandle = { +static UART_HandleTypeDef UartHandle = { .Instance = UART_DEV, .Init = { .BaudRate = CFG_BOARD_UART_BAUDRATE, diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index ec01bbf0f..c0b7469ed 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -77,9 +77,9 @@ *------------------------------------------------------------------*/ typedef enum { - TUSB_ROLE_INVALID = 0, - TUSB_ROLE_DEVICE = 0x1, - TUSB_ROLE_HOST = 0x2, + TUSB_ROLE_INVALID = 0u, + TUSB_ROLE_DEVICE = 0x1u, + TUSB_ROLE_HOST = 0x2u, } tusb_role_t; /// defined base on EHCI specs value for Endpoint Speed @@ -178,7 +178,7 @@ typedef enum { } tusb_request_feature_selector_t; typedef enum { - TUSB_REQ_TYPE_STANDARD = 0, + TUSB_REQ_TYPE_STANDARD = 0u, TUSB_REQ_TYPE_CLASS, TUSB_REQ_TYPE_VENDOR, TUSB_REQ_TYPE_INVALID diff --git a/src/device/dcd.h b/src/device/dcd.h index 400f62bff..436c4555f 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -79,7 +79,7 @@ typedef struct TU_ATTR_ALIGNED(4) { // FUNC_CALL struct { - void (*func) (void*); + void (*func) (void* param); void* param; }func_call; }; diff --git a/src/osal/osal.h b/src/osal/osal.h index 8faa81b07..658b18584 100644 --- a/src/osal/osal.h +++ b/src/osal/osal.h @@ -33,7 +33,7 @@ #include "common/tusb_common.h" -typedef void (*osal_task_func_t)( void * ); +typedef void (*osal_task_func_t)(void* param); // Timeout #define OSAL_TIMEOUT_NOTIMEOUT (0) // Return immediately diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 3e397ef35..6f9b8b0dc 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -35,7 +35,7 @@ extern "C" { // Spinlock API //--------------------------------------------------------------------+ typedef struct { - void (* interrupt_set)(bool); + void (* interrupt_set)(bool enabled); } osal_spinlock_t; // For SMP, spinlock must be locked by hardware, cannot just use interrupt @@ -141,7 +141,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd #include "common/tusb_fifo.h" typedef struct { - void (* interrupt_set)(bool); + void (* interrupt_set)(bool enabled); tu_fifo_t ff; } osal_queue_def_t; diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index f1e4dbd77..8560b2109 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -379,7 +379,7 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin // Enable tx fifo empty interrupt only if there is data. Note must after depctl enable if (dir == TUSB_DIR_IN && total_bytes != 0) { - dwc2->diepempmsk |= (1 << epnum); + dwc2->diepempmsk |= (1u << epnum); } } } @@ -402,7 +402,7 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // Set device max speed uint32_t dcfg = dwc2->dcfg & ~DCFG_DSPD_Msk; if (is_highspeed) { - dcfg |= DCFG_DSPD_HS << DCFG_DSPD_Pos; + // dcfg Highspeed's mask is 0 // XCVRDLY: transceiver delay between xcvr_sel and txvalid during device chirp is required // when using with some PHYs such as USB334x (USB3341, USB3343, USB3346, USB3347) @@ -914,7 +914,7 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep // Turn off TXFE if all bytes are written. tsiz.value = epin->tsiz; if (tsiz.xfer_size == 0) { - dwc2->diepempmsk &= ~(1 << epnum); + dwc2->diepempmsk &= ~(1u << epnum); } } } diff --git a/src/tusb.c b/src/tusb.c index 083e6d861..d52c156ab 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -576,8 +576,12 @@ void tu_print_mem(void const* buf, uint32_t count, uint8_t indent) { if (i % item_per_line == 0) { // Print Ascii - if (i != 0) dump_str_line(buf8 - 16, 16); - for (uint8_t s = 0; s < indent; s++) tu_printf(" "); + if (i != 0) { + dump_str_line(buf8 - 16, 16); + } + for (uint8_t s = 0; s < indent; s++) { + tu_printf(" "); + } // print offset or absolute address tu_printf("%04X: ", 16 * i / item_per_line); } diff --git a/src/tusb_option.h b/src/tusb_option.h index 9d5aed252..14404c59c 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -244,11 +244,11 @@ #define OPT_MODE_HOST 0x0002 ///< Host Mode // High byte is max operational speed (corresponding to tusb_speed_t) -#define OPT_MODE_DEFAULT_SPEED 0x0000 ///< Default (max) speed supported by MCU -#define OPT_MODE_LOW_SPEED 0x0100 ///< Low Speed -#define OPT_MODE_FULL_SPEED 0x0200 ///< Full Speed -#define OPT_MODE_HIGH_SPEED 0x0400 ///< High Speed -#define OPT_MODE_SPEED_MASK 0xff00 +#define OPT_MODE_DEFAULT_SPEED 0x0000u ///< Default (max) speed supported by MCU +#define OPT_MODE_LOW_SPEED 0x0100u ///< Low Speed +#define OPT_MODE_FULL_SPEED 0x0200u ///< Full Speed +#define OPT_MODE_HIGH_SPEED 0x0400u ///< High Speed +#define OPT_MODE_SPEED_MASK 0xff00u //--------------------------------------------------------------------+ // Include tusb_config.h -- cgit v1.3.1 From b08f672daf1efadd9c77a775332dc0b64ac22e4a Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Oct 2025 17:24:55 +0700 Subject: add pvs-studio analyze to ci --- .github/workflows/build.yml | 2 +- .github/workflows/build_util.yml | 26 +++++++++++++ .github/workflows/static_analysis.yml | 43 ++++++++++++++++++++++ examples/device/cdc_msc/src/msc_disk.c | 3 +- examples/device/cdc_msc_freertos/src/msc_disk.c | 3 +- .../device/dynamic_configuration/src/msc_disk.c | 3 +- 6 files changed, 76 insertions(+), 4 deletions(-) create mode 100644 .github/workflows/static_analysis.yml diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index becbc5069..0495ba6a9 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -219,7 +219,7 @@ jobs: uses: actions/checkout@v4 - name: Download Artifacts - uses: actions/download-artifact@v4 + uses: actions/download-artifact@v5 with: path: cmake-build merge-multiple: true diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index a2c96f3c0..d52924efd 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -20,6 +20,10 @@ on: required: false default: false type: boolean + analyze-pvs: + required: false + default: false + type: boolean os: required: false type: string @@ -68,6 +72,28 @@ jobs: fi shell: bash + - name: PVS-Studio analyze + if: ${{ inputs.analyze-pvs }} + run: | + wget -q -O - https://files.pvs-studio.com/etc/pubkey.txt | sudo apt-key add - + sudo wget -O /etc/apt/sources.list.d/viva64.list https://files.pvs-studio.com/etc/viva64.list + sudo apt update + sudo apt install pvs-studio + pvs-studio-analyzer credentials ${{ secrets.PVS_STUDIO_CREDENTIALS }} + mkdir -p sarif-reports + for build_dir in cmake-build/cmake-build-*; do + BOARD=${build_dir#cmake-build/cmake-build-} + pvs-studio-analyzer analyze -f ${build_dir}/compile_commands.json -j -o ${build_dir}/pvs-report.log --exclude-path hw/mcu/ --exclude-path lib/ + plog-converter -t sarif -o sarif-reports/${BOARD}.sarif ${build_dir}/pvs-report.log + done + + - name: PVS-Studio upload SARIF + if: ${{ inputs.analyze-pvs }} + uses: github/codeql-action/upload-sarif@v4 + with: + sarif_file: sarif-reports/ + category: PVS-Studio + - name: Upload Artifacts for Hardware Testing if: ${{ inputs.upload-artifacts }} uses: actions/upload-artifact@v4 diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml new file mode 100644 index 000000000..3ace5cf99 --- /dev/null +++ b/.github/workflows/static_analysis.yml @@ -0,0 +1,43 @@ +name: Static Analysis +on: + workflow_dispatch: + push: + branches: + - master + pull_request: + types: [opened, synchronize, reopened] +jobs: +# SonarQube: +# name: Build and analyze +# runs-on: ubuntu-latest +# env: +# BUILD_WRAPPER_OUT_DIR: build_wrapper_output_directory # Directory where build-wrapper output will be placed +# steps: +# - uses: actions/checkout@v4 +# with: +# fetch-depth: 0 # Shallow clones should be disabled for a better relevancy of analysis +# - name: Install Build Wrapper +# uses: SonarSource/sonarqube-scan-action/install-build-wrapper@v6 +# - name: Run Build Wrapper +# run: | +# build-wrapper-linux-x86-64 --out-dir ${{ env.BUILD_WRAPPER_OUT_DIR }} cmake --build --preset ${{ env.BOARD }} -t ${{ env.EXAMPLE }} +# - name: SonarQube Scan +# uses: SonarSource/sonarqube-scan-action@v6 +# env: +# SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }} +# with: +# args: > +# --define "sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json" + PVS-Studio: + uses: ./.github/workflows/build_util.yml + strategy: + fail-fast: false + matrix: + board: + - 'stm32h743eval' + with: + build-system: 'cmake' + toolchain: 'arm-gcc' + build-args: '-b${{ matrix.board }}' + one-per-family: true + analyze-pvs: true diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 9a43d321e..b39f5efa1 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -45,10 +45,11 @@ enum { DISK_BLOCK_SIZE = 512 }; +static #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; // sector_per_cluster = 1; reserved_sectors = 1; diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 996be738d..29ff86281 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -76,10 +76,11 @@ enum { DISK_BLOCK_SIZE = 512 }; +static #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index 95bf8e45f..ab71b02d6 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -43,10 +43,11 @@ enum DISK_BLOCK_SIZE = 512 }; +static #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; -- cgit v1.3.1 From 9f1a86c0cbf2974775687848a95a126c6503c1cf Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 24 Oct 2025 13:27:38 +0200 Subject: Ensure type promotion Signed-off-by: HiFiPhile --- src/common/tusb_common.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 26db85373..8b988b4f5 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -41,16 +41,16 @@ #define TU_DIV_CEIL(n, d) (((n) + (d) - 1) / (d)) #define TU_DIV_ROUND_NEAREST(v, d) (((v) + (d)/2) / (d) ) // round to nearest integer -#define TU_U16(_high, _low) ((uint16_t) (((_high) << 8) | (_low))) -#define TU_U16_HIGH(_u16) ((uint8_t) (((_u16) >> 8) & 0x00ff)) -#define TU_U16_LOW(_u16) ((uint8_t) ((_u16) & 0x00ff)) +#define TU_U16(_high, _low) ((uint16_t) ((((uint16_t) (_high)) << 8) | ((uint16_t) (_low)))) +#define TU_U16_HIGH(_u16) ((uint8_t) (((uint16_t) (_u16) >> 8) & 0x00ffu)) +#define TU_U16_LOW(_u16) ((uint8_t) ((uint16_t) (_u16) & 0x00ffu)) #define U16_TO_U8S_BE(_u16) TU_U16_HIGH(_u16), TU_U16_LOW(_u16) #define U16_TO_U8S_LE(_u16) TU_U16_LOW(_u16), TU_U16_HIGH(_u16) -#define TU_U24(_high, _mid, _low) ((uint32_t) (((_high) << 16) | ((_mid) << 8) | (_low))) -#define TU_U24_HIGH(_u24) ((uint8_t) (((_u24) >> 16) & 0x0000ff)) -#define TU_U24_MID(_u24) ((uint8_t) (((_u24) >> 8) & 0x0000ff)) -#define TU_U24_LOW(_u24) ((uint8_t) (((_u24) ) & 0x0000ff)) +#define TU_U24(_high, _mid, _low) ((uint32_t) ((((uint32_t) (_high)) << 16) | (((uint32_t) (_mid)) << 8) | ((uint32_t) (_low)))) +#define TU_U24_HIGH(_u24) ((uint8_t) (((uint32_t) (_u24) >> 16) & 0x0000ffu)) +#define TU_U24_MID(_u24) ((uint8_t) (((uint32_t) (_u24) >> 8) & 0x0000ffu)) +#define TU_U24_LOW(_u24) ((uint8_t) ((uint32_t) (_u24) & 0x0000ffu)) #define U24_TO_U8S_BE(_u24) TU_U24_HIGH(_u24), TU_U24_MID(_u24), TU_U24_LOW(_u24) #define U24_TO_U8S_LE(_u24) TU_U24_LOW(_u24), TU_U24_MID(_u24), TU_U24_HIGH(_u24) -- cgit v1.3.1 From 948ba203ca8d31de3f0947bc01b5852174bc8404 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Oct 2025 00:15:41 +0700 Subject: add pvs-studio analyze to ci --- .github/workflows/build_util.yml | 26 ----------------------- .github/workflows/static_analysis.yml | 39 ++++++++++++++++++++++++++++------- 2 files changed, 32 insertions(+), 33 deletions(-) diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index d52924efd..a2c96f3c0 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -20,10 +20,6 @@ on: required: false default: false type: boolean - analyze-pvs: - required: false - default: false - type: boolean os: required: false type: string @@ -72,28 +68,6 @@ jobs: fi shell: bash - - name: PVS-Studio analyze - if: ${{ inputs.analyze-pvs }} - run: | - wget -q -O - https://files.pvs-studio.com/etc/pubkey.txt | sudo apt-key add - - sudo wget -O /etc/apt/sources.list.d/viva64.list https://files.pvs-studio.com/etc/viva64.list - sudo apt update - sudo apt install pvs-studio - pvs-studio-analyzer credentials ${{ secrets.PVS_STUDIO_CREDENTIALS }} - mkdir -p sarif-reports - for build_dir in cmake-build/cmake-build-*; do - BOARD=${build_dir#cmake-build/cmake-build-} - pvs-studio-analyzer analyze -f ${build_dir}/compile_commands.json -j -o ${build_dir}/pvs-report.log --exclude-path hw/mcu/ --exclude-path lib/ - plog-converter -t sarif -o sarif-reports/${BOARD}.sarif ${build_dir}/pvs-report.log - done - - - name: PVS-Studio upload SARIF - if: ${{ inputs.analyze-pvs }} - uses: github/codeql-action/upload-sarif@v4 - with: - sarif_file: sarif-reports/ - category: PVS-Studio - - name: Upload Artifacts for Hardware Testing if: ${{ inputs.upload-artifacts }} uses: actions/upload-artifact@v4 diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 3ace5cf99..6541be129 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -29,15 +29,40 @@ jobs: # args: > # --define "sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json" PVS-Studio: - uses: ./.github/workflows/build_util.yml + runs-on: ubuntu-latest strategy: fail-fast: false matrix: board: - 'stm32h743eval' - with: - build-system: 'cmake' - toolchain: 'arm-gcc' - build-args: '-b${{ matrix.board }}' - one-per-family: true - analyze-pvs: true + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Get Dependencies + uses: ./.github/actions/get_deps + with: + arg: -b${{ matrix.board }} + + - name: Setup Toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: 'arm-gcc' + + - name: Analyze + run: | + wget -q -O - https://files.pvs-studio.com/etc/pubkey.txt | sudo apt-key add - + sudo wget -O /etc/apt/sources.list.d/viva64.list https://files.pvs-studio.com/etc/viva64.list + sudo apt update + sudo apt install pvs-studio + pvs-studio-analyzer credentials ${{ secrets.PVS_STUDIO_CREDENTIALS }} + cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_BUILD_TYPE=MinSizeRel + cmake --build build + pvs-studio-analyzer analyze -f build/compile_commands.json -j --exclude-path hw/mcu/ --exclude-path lib/ + plog-converter -t sarif -o pvs.sarif PVS-Studio.log + + - name: Upload SARIF + uses: github/codeql-action/upload-sarif@v4 + with: + sarif_file: pvs.sarif + category: PVS-Studio -- cgit v1.3.1 From 5e3e24337f82582103ce7e9d8498c49547cab42b Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Oct 2025 12:28:20 +0700 Subject: merge codeql and pvs-studio to static_analysis.yml --- .github/workflows/codeql.yml | 1 + .github/workflows/static_analysis.yml | 119 ++++++++++++++++++++++++++++------ 2 files changed, 99 insertions(+), 21 deletions(-) diff --git a/.github/workflows/codeql.yml b/.github/workflows/codeql.yml index dfcca6315..21ed9c223 100644 --- a/.github/workflows/codeql.yml +++ b/.github/workflows/codeql.yml @@ -41,6 +41,7 @@ jobs: # Consider using larger runners for possible analysis time improvements. runs-on: ubuntu-latest timeout-minutes: 360 + if: false permissions: actions: read contents: read diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 6541be129..f391855f5 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -6,28 +6,80 @@ on: - master pull_request: types: [opened, synchronize, reopened] + +permissions: + actions: read + contents: read + security-events: write + jobs: -# SonarQube: -# name: Build and analyze -# runs-on: ubuntu-latest -# env: -# BUILD_WRAPPER_OUT_DIR: build_wrapper_output_directory # Directory where build-wrapper output will be placed -# steps: -# - uses: actions/checkout@v4 + CodeQL: + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + board: + - 'raspberry_pi_pico' + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Get Dependencies + uses: ./.github/actions/get_deps + with: + arg: -b${{ matrix.board }} + + - name: Setup Toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: 'arm-gcc' + + - name: Initialize CodeQL + uses: github/codeql-action/init@v4 + with: + languages: 'c-cpp' + queries: security-and-quality + + - name: Build + run: | + cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DCMAKE_BUILD_TYPE=MinSizeRel + cmake --build build + + - name: Perform CodeQL Analysis + uses: github/codeql-action/analyze@v4 + with: + category: CodeQL + upload: always + id: step1 + +# - name: Filter out unwanted errors and warnings +# uses: advanced-security/filter-sarif@v1 # with: -# fetch-depth: 0 # Shallow clones should be disabled for a better relevancy of analysis -# - name: Install Build Wrapper -# uses: SonarSource/sonarqube-scan-action/install-build-wrapper@v6 -# - name: Run Build Wrapper -# run: | -# build-wrapper-linux-x86-64 --out-dir ${{ env.BUILD_WRAPPER_OUT_DIR }} cmake --build --preset ${{ env.BOARD }} -t ${{ env.EXAMPLE }} -# - name: SonarQube Scan -# uses: SonarSource/sonarqube-scan-action@v6 -# env: -# SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }} +# patterns: | +# -**:cpp/path-injection +# -**:cpp/world-writable-file-creation +# -**:cpp/poorly-documented-function +# -**:cpp/potentially-dangerous-function +# -**:cpp/use-of-goto +# -**:cpp/integer-multiplication-cast-to-long +# -**:cpp/comparison-with-wider-type +# -**:cpp/leap-year/* +# -**:cpp/ambiguously-signed-bit-field +# -**:cpp/suspicious-pointer-scaling +# -**:cpp/suspicious-pointer-scaling-void +# -**:cpp/unsigned-comparison-zero +# -**/third*party/** +# -**/3rd*party/** +# -**/external/** +# input: ${{ steps.step1.outputs.sarif-output }}/cpp.sarif +# output: ${{ steps.step1.outputs.sarif-output }}/cpp.sarif +# +# - name: Upload SARIF +# uses: github/codeql-action/upload-sarif@v4 # with: -# args: > -# --define "sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json" +# sarif_file: ${{ steps.step1.outputs.sarif-output }} +# category: CodeQL + PVS-Studio: runs-on: ubuntu-latest strategy: @@ -49,14 +101,17 @@ jobs: with: toolchain: 'arm-gcc' - - name: Analyze + - name: Install Tools run: | wget -q -O - https://files.pvs-studio.com/etc/pubkey.txt | sudo apt-key add - sudo wget -O /etc/apt/sources.list.d/viva64.list https://files.pvs-studio.com/etc/viva64.list sudo apt update sudo apt install pvs-studio pvs-studio-analyzer credentials ${{ secrets.PVS_STUDIO_CREDENTIALS }} - cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_BUILD_TYPE=MinSizeRel + + - name: Analyze + run: | + cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DCMAKE_BUILD_TYPE=MinSizeRel cmake --build build pvs-studio-analyzer analyze -f build/compile_commands.json -j --exclude-path hw/mcu/ --exclude-path lib/ plog-converter -t sarif -o pvs.sarif PVS-Studio.log @@ -66,3 +121,25 @@ jobs: with: sarif_file: pvs.sarif category: PVS-Studio + +# SonarQube: +# name: Build and analyze +# runs-on: ubuntu-latest +# env: +# BUILD_WRAPPER_OUT_DIR: build_wrapper_output_directory # Directory where build-wrapper output will be placed +# steps: +# - uses: actions/checkout@v4 +# with: +# fetch-depth: 0 # Shallow clones should be disabled for a better relevancy of analysis +# - name: Install Build Wrapper +# uses: SonarSource/sonarqube-scan-action/install-build-wrapper@v6 +# - name: Run Build Wrapper +# run: | +# build-wrapper-linux-x86-64 --out-dir ${{ env.BUILD_WRAPPER_OUT_DIR }} cmake --build --preset ${{ env.BOARD }} -t ${{ env.EXAMPLE }} +# - name: SonarQube Scan +# uses: SonarSource/sonarqube-scan-action@v6 +# env: +# SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }} +# with: +# args: > +# --define "sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json" -- cgit v1.3.1 From 6cc445ef0f3e7b29cfe2e3d90bb3364afbc424af Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Oct 2025 12:54:40 +0700 Subject: download ninja binary, apt seems take too long ~ 1 min also upload sarif as artifacts --- .github/actions/get_deps/action.yml | 5 ++++- .github/workflows/static_analysis.yml | 25 +++++++++++++++++++------ 2 files changed, 23 insertions(+), 7 deletions(-) diff --git a/.github/actions/get_deps/action.yml b/.github/actions/get_deps/action.yml index ae9e7bbef..b0d6d1066 100644 --- a/.github/actions/get_deps/action.yml +++ b/.github/actions/get_deps/action.yml @@ -19,7 +19,10 @@ runs: - name: Linux dependencies if: runner.os == 'Linux' run: | - sudo apt install -y ninja-build + NINJA_URL=https://github.com/ninja-build/ninja/releases/download/v1.13.1/ninja-linux.zip + wget $NINJA_URL -O ninja-linux.zip + unzip ninja-linux.zip -d ninja-bin + echo >> $GITHUB_PATH "${{ github.workspace }}/ninja-bin" shell: bash - name: Get Dependencies diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index f391855f5..bbb7229df 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -50,7 +50,7 @@ jobs: with: category: CodeQL upload: always - id: step1 + id: analyze # - name: Filter out unwanted errors and warnings # uses: advanced-security/filter-sarif@v1 @@ -71,15 +71,21 @@ jobs: # -**/third*party/** # -**/3rd*party/** # -**/external/** -# input: ${{ steps.step1.outputs.sarif-output }}/cpp.sarif -# output: ${{ steps.step1.outputs.sarif-output }}/cpp.sarif +# input: ${{ steps.analyze.outputs.sarif-output }}/cpp.sarif +# output: ${{ steps.analyze.outputs.sarif-output }}/cpp.sarif # # - name: Upload SARIF # uses: github/codeql-action/upload-sarif@v4 # with: -# sarif_file: ${{ steps.step1.outputs.sarif-output }} +# sarif_file: ${{ steps.analyze.outputs.sarif-output }} # category: CodeQL + - name: Upload artifact + uses: actions/upload-artifact@v5 + with: + name: codeql-${{ matrix.board }} + path: ${{ steps.analyze.outputs.sarif-output }} + PVS-Studio: runs-on: ubuntu-latest strategy: @@ -114,14 +120,21 @@ jobs: cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DCMAKE_BUILD_TYPE=MinSizeRel cmake --build build pvs-studio-analyzer analyze -f build/compile_commands.json -j --exclude-path hw/mcu/ --exclude-path lib/ - plog-converter -t sarif -o pvs.sarif PVS-Studio.log + plog-converter -t sarif -o pvs-${{ matrix.board }}.sarif PVS-Studio.log - name: Upload SARIF uses: github/codeql-action/upload-sarif@v4 with: - sarif_file: pvs.sarif + sarif_file: pvs-${{ matrix.board }}.sarif category: PVS-Studio + - name: Upload artifact + uses: actions/upload-artifact@v5 + with: + name: pvs-${{ matrix.board }} + path: pvs-${{ matrix.board }}.sarif + + # SonarQube: # name: Build and analyze # runs-on: ubuntu-latest -- cgit v1.3.1 From 531009c9a02d719d3222c89dc9d31f5967e23af3 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Oct 2025 13:36:26 +0700 Subject: add SonarQube scan --- .github/workflows/static_analysis.yml | 70 +++++++++++++++++++++++------------ 1 file changed, 46 insertions(+), 24 deletions(-) diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index bbb7229df..e5254344b 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -42,6 +42,7 @@ jobs: - name: Build run: | + mkdir -p build cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DCMAKE_BUILD_TYPE=MinSizeRel cmake --build build @@ -117,10 +118,11 @@ jobs: - name: Analyze run: | + mkdir -p build cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DCMAKE_BUILD_TYPE=MinSizeRel cmake --build build pvs-studio-analyzer analyze -f build/compile_commands.json -j --exclude-path hw/mcu/ --exclude-path lib/ - plog-converter -t sarif -o pvs-${{ matrix.board }}.sarif PVS-Studio.log + plog-converter -t sarif -o pvs-studio-${{ matrix.board }}.sarif PVS-Studio.log - name: Upload SARIF uses: github/codeql-action/upload-sarif@v4 @@ -131,28 +133,48 @@ jobs: - name: Upload artifact uses: actions/upload-artifact@v5 with: - name: pvs-${{ matrix.board }} - path: pvs-${{ matrix.board }}.sarif + name: pvs-studio-${{ matrix.board }} + path: pvs-studio-${{ matrix.board }}.sarif + SonarQube: + runs-on: ubuntu-latest + env: + BUILD_WRAPPER_OUT_DIR: build_wrapper_output_directory + strategy: + fail-fast: false + matrix: + board: + - 'metro_m4_express' + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + with: + fetch-depth: 0 # Shallow clones should be disabled for a better relevancy of analysis -# SonarQube: -# name: Build and analyze -# runs-on: ubuntu-latest -# env: -# BUILD_WRAPPER_OUT_DIR: build_wrapper_output_directory # Directory where build-wrapper output will be placed -# steps: -# - uses: actions/checkout@v4 -# with: -# fetch-depth: 0 # Shallow clones should be disabled for a better relevancy of analysis -# - name: Install Build Wrapper -# uses: SonarSource/sonarqube-scan-action/install-build-wrapper@v6 -# - name: Run Build Wrapper -# run: | -# build-wrapper-linux-x86-64 --out-dir ${{ env.BUILD_WRAPPER_OUT_DIR }} cmake --build --preset ${{ env.BOARD }} -t ${{ env.EXAMPLE }} -# - name: SonarQube Scan -# uses: SonarSource/sonarqube-scan-action@v6 -# env: -# SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }} -# with: -# args: > -# --define "sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json" + - name: Get Dependencies + uses: ./.github/actions/get_deps + with: + arg: -b${{ matrix.board }} + + - name: Setup Toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: 'arm-gcc' + + - name: Install Build Wrapper + uses: SonarSource/sonarqube-scan-action/install-build-wrapper@v6 + + - name: Run Build Wrapper + run: | + cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DCMAKE_BUILD_TYPE=MinSizeRel + build-wrapper-linux-x86-64 --out-dir ${{ env.BUILD_WRAPPER_OUT_DIR }} cmake --build build/ + + - name: SonarQube Scan + uses: SonarSource/sonarqube-scan-action@v6 + env: + SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }} + SONAR_ROOT_CERT: ${{ secrets.SONAR_ROOT_CERT }} + with: + # Consult https://docs.sonarsource.com/sonarqube-server/latest/analyzing-source-code/scanners/sonarscanner/ for more information and options + args: > + --define sonar.cfamily.compile-commands="${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json" -- cgit v1.3.1 From 5818db49b2de8689a07007a5e4d329b94d67ef42 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Oct 2025 13:54:10 +0700 Subject: add SonarQube scan --- .github/workflows/static_analysis.yml | 5 ++--- sonar-project.properties | 14 ++++++++++++++ 2 files changed, 16 insertions(+), 3 deletions(-) create mode 100644 sonar-project.properties diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index e5254344b..45c5c959b 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -127,7 +127,7 @@ jobs: - name: Upload SARIF uses: github/codeql-action/upload-sarif@v4 with: - sarif_file: pvs-${{ matrix.board }}.sarif + sarif_file: pvs-studio-${{ matrix.board }}.sarif category: PVS-Studio - name: Upload artifact @@ -173,8 +173,7 @@ jobs: uses: SonarSource/sonarqube-scan-action@v6 env: SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }} - SONAR_ROOT_CERT: ${{ secrets.SONAR_ROOT_CERT }} with: # Consult https://docs.sonarsource.com/sonarqube-server/latest/analyzing-source-code/scanners/sonarscanner/ for more information and options args: > - --define sonar.cfamily.compile-commands="${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json" + --define sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json diff --git a/sonar-project.properties b/sonar-project.properties new file mode 100644 index 000000000..d797bfe6f --- /dev/null +++ b/sonar-project.properties @@ -0,0 +1,14 @@ +sonar.projectKey=hathach_tinyusb +sonar.organization=hathach + + +# This is the name and version displayed in the SonarCloud UI. +sonar.projectName=tinyusb +sonar.projectVersion=0.19.0 + + +# Path is relative to the sonar-project.properties file. Replace "\" by "/" on Windows. +#sonar.sources=. + +# Encoding of the source code. Default is default system encoding +#sonar.sourceEncoding=UTF-8 -- cgit v1.3.1 From 80309e4d13b10acba40ef4bccec139cecdffe9cf Mon Sep 17 00:00:00 2001 From: peppapighs Date: Sat, 25 Oct 2025 08:53:38 +0800 Subject: dcd/dwc2: clear pending suspend interrupt before usb reset --- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 + src/portable/synopsys/dwc2/dwc2_at32.h | 79 +++++++++++++++++----------------- 2 files changed, 42 insertions(+), 39 deletions(-) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index f1e4dbd77..e560a1e19 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1054,6 +1054,8 @@ void dcd_int_handler(uint8_t rhport) { if (gintsts & GINTSTS_ENUMDNE) { // ENUMDNE is the end of reset where speed of the link is detected dwc2->gintsts = GINTSTS_ENUMDNE; + // There may be a pending suspend event, so we clear it first + dwc2->gintsts = GINTSTS_USBSUSP; dwc2->gintmsk |= GINTMSK_USBSUSPM; handle_enum_done(rhport); } diff --git a/src/portable/synopsys/dwc2/dwc2_at32.h b/src/portable/synopsys/dwc2/dwc2_at32.h index 37b6592c4..513495eb1 100644 --- a/src/portable/synopsys/dwc2/dwc2_at32.h +++ b/src/portable/synopsys/dwc2/dwc2_at32.h @@ -64,58 +64,59 @@ #endif #ifdef __cplusplus - extern "C" { +extern "C" { #endif - static const dwc2_controller_t _dwc2_controller[] = { -{.reg_base = DWC2_OTG1_REG_BASE, .irqnum = OTG1_IRQn, .ep_count = DWC2_EP_MAX, .ep_fifo_size = OTG1_FIFO_SIZE}, +static const dwc2_controller_t _dwc2_controller[] = { + {.reg_base = DWC2_OTG1_REG_BASE, .irqnum = OTG1_IRQn, .ep_count = DWC2_EP_MAX, .ep_fifo_size = OTG1_FIFO_SIZE}, #if defined DWC2_OTG2_REG_BASE - {.reg_base = DWC2_OTG2_REG_BASE, .irqnum = OTG2_IRQn, .ep_count = DWC2_EP_MAX, .ep_fifo_size = OTG2_FIFO_SIZE} + {.reg_base = DWC2_OTG2_REG_BASE, .irqnum = OTG2_IRQn, .ep_count = DWC2_EP_MAX, .ep_fifo_size = OTG2_FIFO_SIZE} #endif - }; +}; - TU_ATTR_ALWAYS_INLINE static inline void dwc2_int_set(uint8_t rhport, tusb_role_t role, bool enabled) { - (void) role; - const IRQn_Type irqn = (IRQn_Type) _dwc2_controller[rhport].irqnum; - if (enabled) { - NVIC_EnableIRQ(irqn); - } else { - NVIC_DisableIRQ(irqn); - } - } +TU_ATTR_ALWAYS_INLINE static inline void dwc2_int_set(uint8_t rhport, tusb_role_t role, bool enabled) { + (void) role; + const IRQn_Type irqn = (IRQn_Type) _dwc2_controller[rhport].irqnum; + if (enabled) { + NVIC_EnableIRQ(irqn); + } else { + NVIC_DisableIRQ(irqn); + } +} - TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_enable(uint8_t rhport) { NVIC_EnableIRQ(_dwc2_controller[rhport].irqnum); - } +TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_enable(uint8_t rhport) { + NVIC_EnableIRQ(_dwc2_controller[rhport].irqnum); +} - TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_disable(uint8_t rhport) { - NVIC_DisableIRQ(_dwc2_controller[rhport].irqnum); - } +TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_disable(uint8_t rhport) { + NVIC_DisableIRQ(_dwc2_controller[rhport].irqnum); +} - TU_ATTR_ALWAYS_INLINE static inline void dwc2_remote_wakeup_delay(void) { - // try to delay for 1 ms - uint32_t count = system_core_clock / 1000; - while (count--) __asm volatile("nop"); - } +TU_ATTR_ALWAYS_INLINE static inline void dwc2_remote_wakeup_delay(void) { + // try to delay for 1 ms + uint32_t count = system_core_clock / 1000; + while (count--) __asm volatile("nop"); +} - // MCU specific PHY init, called BEFORE core reset - TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t *dwc2, uint8_t hs_phy_type) { - (void) dwc2; - // Enable on-chip HS PHY - if (hs_phy_type == GHWCFG2_HSPHY_UTMI || hs_phy_type == GHWCFG2_HSPHY_UTMI_ULPI) { - } else if (hs_phy_type == GHWCFG2_HSPHY_NOT_SUPPORTED) { - } - } +// MCU specific PHY init, called BEFORE core reset +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_init(dwc2_regs_t *dwc2, uint8_t hs_phy_type) { + (void) dwc2; + // Enable on-chip HS PHY + if (hs_phy_type == GHWCFG2_HSPHY_UTMI || hs_phy_type == GHWCFG2_HSPHY_UTMI_ULPI) { + } else if (hs_phy_type == GHWCFG2_HSPHY_NOT_SUPPORTED) { + } +} - // MCU specific PHY update, it is called AFTER init() and core reset - TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_update(dwc2_regs_t *dwc2, uint8_t hs_phy_type) { - (void) dwc2; - (void) hs_phy_type; +// MCU specific PHY update, it is called AFTER init() and core reset +TU_ATTR_ALWAYS_INLINE static inline void dwc2_phy_update(dwc2_regs_t *dwc2, uint8_t hs_phy_type) { + (void) dwc2; + (void) hs_phy_type; - dwc2->stm32_gccfg |= STM32_GCCFG_PWRDWN | STM32_GCCFG_DCDEN | STM32_GCCFG_PDEN; - } + dwc2->stm32_gccfg |= STM32_GCCFG_PWRDWN | STM32_GCCFG_DCDEN | STM32_GCCFG_PDEN; +} #ifdef __cplusplus } #endif -#endif /* DWC2_GD32_H_ */ +#endif /* DWC2_AT32_H_ */ -- cgit v1.3.1 From d7c4bf14b464a509120ff18f94e9b02cd1c6f9fa Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Oct 2025 16:30:42 +0700 Subject: add IAR CStat to static_analysis.yml --- .circleci/config2.yml | 2 + .../actions/setup_toolchain/download/action.yml | 4 +- .github/actions/setup_toolchain/toolchain.json | 2 +- .github/workflows/codeql-buildscript.sh | 6 - .github/workflows/codeql.yml | 138 --------------------- .github/workflows/fail_on_error.py | 34 ----- .github/workflows/static_analysis.yml | 55 +++++++- tools/make_release.py | 11 ++ 8 files changed, 67 insertions(+), 185 deletions(-) delete mode 100644 .github/workflows/codeql-buildscript.sh delete mode 100644 .github/workflows/codeql.yml delete mode 100755 .github/workflows/fail_on_error.py diff --git a/.circleci/config2.yml b/.circleci/config2.yml index d86a3f662..bd2a7d02a 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -34,6 +34,7 @@ commands: chmod +x toolchain.run ./toolchain.run -p ~/cache/<< parameters.toolchain >>/gnurx -y elif [[ << parameters.toolchain >> == arm-iar ]]; then + wget --progress=dot:giga https://netstorage.iar.com/FileStore/STANDARD/001/003/926/iar-lmsc-tools_1.8_amd64.deb -O ~/cache/<< parameters.toolchain >>/iar-lmsc-tools.deb wget --progress=dot:giga $toolchain_url -O ~/cache/<< parameters.toolchain >>/toolchain.deb else wget --progress=dot:giga $toolchain_url -O toolchain.tar.gz @@ -44,6 +45,7 @@ commands: # Add toolchain to PATH if [[ << parameters.toolchain >> == arm-iar ]]; then # Install IAR since we only cache deb file + sudo dpkg -i ~/cache/<< parameters.toolchain >>/iar-lmsc-tools.deb sudo dpkg --ignore-depends=libusb-1.0-0 -i ~/cache/<< parameters.toolchain >>/toolchain.deb echo "export PATH=$PATH:/opt/iar/cxarm/arm/bin" >> $BASH_ENV else diff --git a/.github/actions/setup_toolchain/download/action.yml b/.github/actions/setup_toolchain/download/action.yml index ce9643010..514b38f19 100644 --- a/.github/actions/setup_toolchain/download/action.yml +++ b/.github/actions/setup_toolchain/download/action.yml @@ -29,6 +29,7 @@ runs: chmod +x toolchain.run ./toolchain.run -p ~/cache/${{ inputs.toolchain }}/gnurx -y elif [[ ${{ inputs.toolchain }} == arm-iar ]]; then + wget --progress=dot:giga https://netstorage.iar.com/FileStore/STANDARD/001/003/926/iar-lmsc-tools_1.8_amd64.deb -O ~/cache/${{ inputs.toolchain }}/iar-lmsc-tools.deb wget --progress=dot:giga ${{ inputs.toolchain_url }} -O ~/cache/${{ inputs.toolchain }}/cxarm.deb else wget --progress=dot:giga ${{ inputs.toolchain_url }} -O toolchain.tar.gz @@ -39,7 +40,8 @@ runs: - name: Setup Toolchain run: | if [[ ${{ inputs.toolchain }} == arm-iar ]]; then - sudo apt-get install -y ~/cache/${{ inputs.toolchain }}/cxarm.deb + sudo dpkg -i ~/cache/${{ inputs.toolchain }}/iar-lmsc-tools.deb + sudo apt install -y ~/cache/${{ inputs.toolchain }}/cxarm.deb echo >> $GITHUB_PATH "/opt/iar/cxarm/arm/bin" else echo >> $GITHUB_PATH `echo ~/cache/${{ inputs.toolchain }}/*/bin` diff --git a/.github/actions/setup_toolchain/toolchain.json b/.github/actions/setup_toolchain/toolchain.json index f7123ef11..8496dcad3 100644 --- a/.github/actions/setup_toolchain/toolchain.json +++ b/.github/actions/setup_toolchain/toolchain.json @@ -5,5 +5,5 @@ "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run", - "arm-iar": "https://netstorage.iar.com/FileStore/STANDARD/001/003/583/cxarm-9.60.4.deb" + "arm-iar": "https://netstorage.iar.com/FileStore/STANDARD/001/003/723/cxarm-9.70.1.deb" } diff --git a/.github/workflows/codeql-buildscript.sh b/.github/workflows/codeql-buildscript.sh deleted file mode 100644 index 272b55d22..000000000 --- a/.github/workflows/codeql-buildscript.sh +++ /dev/null @@ -1,6 +0,0 @@ -#!/usr/bin/env bash - -FAMILY=stm32l4 -pip install click -python3 tools/get_deps.py $FAMILY -python3 tools/build.py -s make $FAMILY diff --git a/.github/workflows/codeql.yml b/.github/workflows/codeql.yml deleted file mode 100644 index 21ed9c223..000000000 --- a/.github/workflows/codeql.yml +++ /dev/null @@ -1,138 +0,0 @@ -# For most projects, this workflow file will not need changing; you simply need -# to commit it to your repository. -# -# You may wish to alter this file to override the set of languages analyzed, -# or to provide custom queries or build logic. -# -# ******** NOTE ******** -# We have attempted to detect the languages in your repository. Please check -# the `language` matrix defined below to confirm you have the correct set of -# supported CodeQL languages. -# -name: "CodeQL" - -on: - push: - branches: [ 'master' ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/codeql.yml' - pull_request: - branches: [ 'master' ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/codeql.yml' - schedule: - - cron: '0 0 * * *' - -jobs: - analyze: - name: Analyze - # Runner size impacts CodeQL analysis time. To learn more, please see: - # - https://gh.io/recommended-hardware-resources-for-running-codeql - # - https://gh.io/supported-runners-and-hardware-resources - # - https://gh.io/using-larger-runners - # Consider using larger runners for possible analysis time improvements. - runs-on: ubuntu-latest - timeout-minutes: 360 - if: false - permissions: - actions: read - contents: read - security-events: write - - strategy: - fail-fast: false - matrix: - language: [ 'c-cpp' ] - # CodeQL supports [ 'c-cpp', 'csharp', 'go', 'java-kotlin', 'javascript-typescript', 'python', 'ruby', 'swift' ] - # Use only 'java-kotlin' to analyze code written in Java, Kotlin or both - # Use only 'javascript-typescript' to analyze code written in JavaScript, TypeScript or both - # Learn more about CodeQL language support at https://aka.ms/codeql-docs/language-support - - steps: - - name: Checkout repository - uses: actions/checkout@v4 - - - name: Setup Toolchain - uses: ./.github/actions/setup_toolchain - with: - toolchain: 'arm-gcc' - - # Initializes the CodeQL tools for scanning. - - name: Initialize CodeQL - uses: github/codeql-action/init@v3 - with: - languages: ${{ matrix.language }} - # If you wish to specify custom queries, you can do so here or in a config file. - # By default, queries listed here will override any specified in a config file. - # Prefix the list here with "+" to use these queries and those in the config file. - - # For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs - # queries: security-extended,security-and-quality - queries: security-and-quality - - - # Autobuild attempts to build any compiled languages (C/C++, C#, Go, Java, or Swift). - # If this step fails, then you should remove it and run the build manually (see below) - #- name: Autobuild - # uses: github/codeql-action/autobuild@v2 - - # ℹ️ Command-line programs to run using the OS shell. - # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun - - # If the Autobuild fails above, remove it and uncomment the following three lines. - # modify them (or add more) to build your code if your project, please refer to the EXAMPLE below for guidance. - - - run: | - ./.github/workflows/codeql-buildscript.sh - - - name: Perform CodeQL Analysis - uses: github/codeql-action/analyze@v3 - with: - category: "/language:${{matrix.language}}" - upload: false - id: step1 - - # Filter out rules with low severity or high false positive rate - # Also filter out warnings in third-party code - - name: Filter out unwanted errors and warnings - uses: advanced-security/filter-sarif@v1 - with: - patterns: | - -**:cpp/path-injection - -**:cpp/world-writable-file-creation - -**:cpp/poorly-documented-function - -**:cpp/potentially-dangerous-function - -**:cpp/use-of-goto - -**:cpp/integer-multiplication-cast-to-long - -**:cpp/comparison-with-wider-type - -**:cpp/leap-year/* - -**:cpp/ambiguously-signed-bit-field - -**:cpp/suspicious-pointer-scaling - -**:cpp/suspicious-pointer-scaling-void - -**:cpp/unsigned-comparison-zero - -**/third*party/** - -**/3rd*party/** - -**/external/** - input: ${{ steps.step1.outputs.sarif-output }}/cpp.sarif - output: ${{ steps.step1.outputs.sarif-output }}/cpp.sarif - - - name: Upload SARIF - uses: github/codeql-action/upload-sarif@v3 - with: - sarif_file: ${{ steps.step1.outputs.sarif-output }} - category: "/language:${{matrix.language}}" - - - name: Upload CodeQL results as an artifact - uses: actions/upload-artifact@v4 - with: - name: codeql-results - path: ${{ steps.step1.outputs.sarif-output }} - retention-days: 5 diff --git a/.github/workflows/fail_on_error.py b/.github/workflows/fail_on_error.py deleted file mode 100755 index 29791742b..000000000 --- a/.github/workflows/fail_on_error.py +++ /dev/null @@ -1,34 +0,0 @@ -#!/usr/bin/env python3 - -import json -import sys - -# Return whether SARIF file contains error-level results -def codeql_sarif_contain_error(filename): - with open(filename, 'r') as f: - s = json.load(f) - - for run in s.get('runs', []): - rules_metadata = run['tool']['driver']['rules'] - if not rules_metadata: - rules_metadata = run['tool']['extensions'][0]['rules'] - - for res in run.get('results', []): - if 'ruleIndex' in res: - rule_index = res['ruleIndex'] - elif 'rule' in res and 'index' in res['rule']: - rule_index = res['rule']['index'] - else: - continue - try: - rule_level = rules_metadata[rule_index]['defaultConfiguration']['level'] - except IndexError as e: - print(e, rule_index, len(rules_metadata)) - else: - if rule_level == 'error': - return True - return False - -if __name__ == "__main__": - if codeql_sarif_contain_error(sys.argv[1]): - sys.exit(1) diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 45c5c959b..e060dfbc9 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -19,7 +19,7 @@ jobs: fail-fast: false matrix: board: - - 'raspberry_pi_pico' + - 'metro_m4_express' steps: - name: Checkout TinyUSB uses: actions/checkout@v4 @@ -88,12 +88,13 @@ jobs: path: ${{ steps.analyze.outputs.sarif-output }} PVS-Studio: + if: github.repository_owner == 'hathach' runs-on: ubuntu-latest strategy: fail-fast: false matrix: board: - - 'stm32h743eval' + - 'raspberry_pi_pico' steps: - name: Checkout TinyUSB uses: actions/checkout@v4 @@ -119,7 +120,7 @@ jobs: - name: Analyze run: | mkdir -p build - cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DCMAKE_BUILD_TYPE=MinSizeRel + cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_BUILD_TYPE=MinSizeRel cmake --build build pvs-studio-analyzer analyze -f build/compile_commands.json -j --exclude-path hw/mcu/ --exclude-path lib/ plog-converter -t sarif -o pvs-studio-${{ matrix.board }}.sarif PVS-Studio.log @@ -137,6 +138,7 @@ jobs: path: pvs-studio-${{ matrix.board }}.sarif SonarQube: + if: github.repository_owner == 'hathach' runs-on: ubuntu-latest env: BUILD_WRAPPER_OUT_DIR: build_wrapper_output_directory @@ -144,7 +146,7 @@ jobs: fail-fast: false matrix: board: - - 'metro_m4_express' + - 'stm32h743eval' steps: - name: Checkout TinyUSB uses: actions/checkout@v4 @@ -166,7 +168,7 @@ jobs: - name: Run Build Wrapper run: | - cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DCMAKE_BUILD_TYPE=MinSizeRel + cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_BUILD_TYPE=MinSizeRel build-wrapper-linux-x86-64 --out-dir ${{ env.BUILD_WRAPPER_OUT_DIR }} cmake --build build/ - name: SonarQube Scan @@ -177,3 +179,46 @@ jobs: # Consult https://docs.sonarsource.com/sonarqube-server/latest/analyzing-source-code/scanners/sonarscanner/ for more information and options args: > --define sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json + + IAR-CStat: + if: github.repository_owner == 'hathach' + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + board: + - 'b_g474e_dpow1' + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Get Dependencies + uses: ./.github/actions/get_deps + with: + arg: -b${{ matrix.board }} + + - name: Setup Toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: 'arm-iar' + + - name: Run IAR C-STAT Analysis + env: + IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} + run: | + # CMake run post build to generate C-STAT SARIF report + mkdir -p build + cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DTOOLCHAIN=iar -DIAR_CSTAT=1 -DCMAKE_BUILD_TYPE=MinSizeRel + cmake --build build + + - name: Upload SARIF + uses: github/codeql-action/upload-sarif@v4 + with: + sarif_file: build/cstat_sarif + category: IAR-CStat + + - name: Upload artifact + uses: actions/upload-artifact@v5 + with: + name: iar-cstat-${{ matrix.board }} + path: build/cstat_sarif diff --git a/tools/make_release.py b/tools/make_release.py index 488ad4901..0e7919f46 100755 --- a/tools/make_release.py +++ b/tools/make_release.py @@ -44,6 +44,17 @@ with open(f_library_json) as f: with open(f_library_json, 'w') as f: f.write(fdata) +################### +# sonar-project.properties +################### +f_sonar_properties = 'sonar-project.properties' +with open(f_sonar_properties) as f: + fdata = f.read() + fdata = re.sub(r'(sonar\.projectVersion=)\d+\.\d+\.\d+', rf'\1{version}', fdata) + +with open(f_sonar_properties, 'w') as f: + f.write(fdata) + ################### # docs/info/changelog.rst ################### -- cgit v1.3.1 From 42f000df8e52cfe0a46867a5e1fa5817cd58bc8a Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Oct 2025 17:36:01 +0700 Subject: iar cstat require cmake at least 4.1 --- .github/workflows/static_analysis.yml | 19 +++++++++++++++---- examples/build_system/cmake/toolchain/arm_iar.cmake | 1 + hw/bsp/family_support.cmake | 8 ++++---- 3 files changed, 20 insertions(+), 8 deletions(-) diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index e060dfbc9..0af8ac42c 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -202,23 +202,34 @@ jobs: with: toolchain: 'arm-iar' - - name: Run IAR C-STAT Analysis + - name: Install CMake 4.2 + run: | + # IAR CSTAT requires CMake >= 4.1 + wget -q https://github.com/Kitware/CMake/releases/download/v4.2.0-rc1/cmake-4.2.0-rc1-linux-x86_64.tar.gz + tar -xzf cmake-4.2.0-rc1-linux-x86_64.tar.gz + echo "${{ github.workspace }}/cmake-4.2.0-rc1-linux-x86_64/bin" >> $GITHUB_PATH + + - name: Build and run IAR C-STAT Analysis env: IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} run: | # CMake run post build to generate C-STAT SARIF report + cmake --version mkdir -p build - cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DTOOLCHAIN=iar -DIAR_CSTAT=1 -DCMAKE_BUILD_TYPE=MinSizeRel + cmake examples/device/cdc_msc -B build -G Ninja -DBOARD=${{ matrix.board }} -DTOOLCHAIN=iar -DIAR_CSTAT=1 -DCMAKE_BUILD_TYPE=MinSizeRel cmake --build build + # Merge sarif files for codeql upload + npm i -g @microsoft/sarif-multitool + npx @microsoft/sarif-multitool merge --merge-runs --output-file iar-cstat-${{ matrix.board }}.sarif build/cstat_sarif/*.sarif - name: Upload SARIF uses: github/codeql-action/upload-sarif@v4 with: - sarif_file: build/cstat_sarif + sarif_file: iar-cstat-${{ matrix.board }}.sarif category: IAR-CStat - name: Upload artifact uses: actions/upload-artifact@v5 with: name: iar-cstat-${{ matrix.board }} - path: build/cstat_sarif + path: iar-cstat-${{ matrix.board }}.sarif diff --git a/examples/build_system/cmake/toolchain/arm_iar.cmake b/examples/build_system/cmake/toolchain/arm_iar.cmake index 42b057020..f4c0a500e 100644 --- a/examples/build_system/cmake/toolchain/arm_iar.cmake +++ b/examples/build_system/cmake/toolchain/arm_iar.cmake @@ -19,6 +19,7 @@ find_program(CMAKE_IAR_CHECKS ichecks) find_program(CMAKE_IAR_REPORT ireport) if (IAR_CSTAT) +cmake_minimum_required(VERSION 4.1) set(CMAKE_C_ICSTAT ${CMAKE_IAR_CSTAT} --checks=${CMAKE_CURRENT_LIST_DIR}/cstat_sel_checks.txt --db=${CMAKE_BINARY_DIR}/cstat.db --sarif_dir=${CMAKE_BINARY_DIR}/cstat_sarif) endif () diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 79a9f459b..912e0f4d7 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -300,10 +300,10 @@ function(family_configure_common TARGET RTOS) COMMAND_EXPAND_LISTS ) # generate C-STAT report - add_custom_command(TARGET ${TARGET} POST_BUILD - COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/cstat_report - COMMAND ireport --db=${CMAKE_BINARY_DIR}/cstat.db --full --project ${TARGET} --output ${CMAKE_CURRENT_BINARY_DIR}/cstat_report/index.html - ) +# add_custom_command(TARGET ${TARGET} POST_BUILD +# COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/cstat_report +# COMMAND ireport --db=${CMAKE_BINARY_DIR}/cstat.db --full --project ${TARGET} --output ${CMAKE_CURRENT_BINARY_DIR}/cstat_report/index.html +# ) endif () endif () -- cgit v1.3.1 From 8865ec47814628ba1c50e52f09b7ef2fe10d463d Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 27 Oct 2025 12:09:33 +0700 Subject: update static_analysis.yml workflow --- .github/workflows/static_analysis.yml | 21 ++++++++++++++++++--- sonar-project.properties | 1 + 2 files changed, 19 insertions(+), 3 deletions(-) diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 0af8ac42c..83eea5283 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -2,15 +2,30 @@ name: Static Analysis on: workflow_dispatch: push: - branches: - - master + branches: [ master ] + paths: + - 'src/**' + - 'examples/**' + - 'hw/bsp/**' + - '.github/workflows/static_analysis.yml' pull_request: - types: [opened, synchronize, reopened] + branches: [ master ] + paths: + - 'src/**' + - 'examples/**' + - 'hw/bsp/**' + - '.github/workflows/static_analysis.yml' permissions: actions: read contents: read security-events: write +# pull-requests: write +# checks: write + +concurrency: + group: ${{ github.workflow }}-${{ github.ref }} + cancel-in-progress: true jobs: CodeQL: diff --git a/sonar-project.properties b/sonar-project.properties index d797bfe6f..5a19a234d 100644 --- a/sonar-project.properties +++ b/sonar-project.properties @@ -9,6 +9,7 @@ sonar.projectVersion=0.19.0 # Path is relative to the sonar-project.properties file. Replace "\" by "/" on Windows. #sonar.sources=. +sonar.exclusions=lib/**,hw/mcu/**,test/** # Encoding of the source code. Default is default system encoding #sonar.sourceEncoding=UTF-8 -- cgit v1.3.1 From d55e074a36de0331006fca1a19a241e98f9bd7e1 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 27 Oct 2025 17:11:42 +0700 Subject: improve warnings with rp2040 family --- hw/bsp/family_support.cmake | 55 ++------------------- hw/bsp/rp2040/family.c | 2 +- hw/bsp/rp2040/family.cmake | 66 +++++++++++++++----------- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 11 +++++ 4 files changed, 54 insertions(+), 80 deletions(-) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 912e0f4d7..16c0d48d7 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -63,8 +63,9 @@ set(WARN_FLAGS_GNU -Wunused -Wunused-function -Wreturn-type - #-Wredundant-decls - #-Wmissing-prototypes + -Wredundant-decls + -Wmissing-prototypes +# -Wconversion ) set(WARN_FLAGS_Clang ${WARN_FLAGS_GNU}) @@ -391,56 +392,6 @@ function(family_example_missing_dependency TARGET DEPENDENCY) message(WARNING "${DEPENDENCY} submodule needed by ${TARGET} not found, please run 'python tools/get_deps.py ${DEPENDENCY}' to fetch it") endfunction() -#---------------------------------- -# RPI specific: refactor later -#---------------------------------- -function(family_add_default_example_warnings TARGET) - target_compile_options(${TARGET} PUBLIC - -Wall - -Wextra - -Werror - -Wfatal-errors - -Wdouble-promotion - -Wfloat-equal - # FIXME commented out because of https://github.com/raspberrypi/pico-sdk/issues/1468 - #-Wshadow - -Wwrite-strings - -Wsign-compare - -Wmissing-format-attribute - -Wunreachable-code - -Wcast-align - -Wcast-qual - -Wnull-dereference - -Wuninitialized - -Wunused - -Wredundant-decls - #-Wstrict-prototypes - #-Werror-implicit-function-declaration - #-Wundef - ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0 AND NO_WARN_RWX_SEGMENTS_SUPPORTED) - target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") - endif() - - # GCC 10 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) - target_compile_options(${TARGET} PUBLIC -Wconversion) - endif() - - # GCC 8 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) - target_compile_options(${TARGET} PUBLIC -Wcast-function-type -Wstrict-overflow) - endif() - - # GCC 6 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0) - target_compile_options(${TARGET} PUBLIC -Wno-strict-aliasing) - endif() - endif() -endfunction() - #---------------------------------- # Flashing target #---------------------------------- diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 989140e02..35e5fc923 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -92,7 +92,7 @@ static uart_inst_t *uart_inst; // // This doesn't work if others are trying to access flash at the same time, // e.g. XIP streamer, or the other core. -bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { +static bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { const uint CS_PIN_INDEX = 1; // Must disable interrupts, as interrupt handlers may be in flash, and we diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 3bec5bf70..5d6d8b40e 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -184,6 +184,43 @@ endif() #------------------------------------ # Functions #------------------------------------ +function(family_add_default_example_warnings TARGET) + # Apply warnings to all TinyUSB interface library sources as well as examples sources + # we cannot set compile options for target since it will not propagate to INTERFACE sources then picosdk files + foreach(TINYUSB_TARGET IN ITEMS tinyusb_common_base tinyusb_device_base tinyusb_host_base tinyusb_host_max3421 tinyusb_bsp) + get_target_property(TINYUSB_SOURCES ${TINYUSB_TARGET} INTERFACE_SOURCES) + set_source_files_properties(${TINYUSB_SOURCES} PROPERTIES COMPILE_OPTIONS "${WARN_FLAGS_${CMAKE_C_COMPILER_ID}}") + endforeach() + + # Also apply to example sources, but filter out any source files from lib/ (e.g. fatfs) + get_target_property(EXAMPLE_SOURCES ${TARGET} SOURCES) + set(FILTERED_SOURCES "") + foreach(SOURCE_FILE IN LISTS EXAMPLE_SOURCES) + string(FIND "${SOURCE_FILE}" "${TOP}/lib" FOUND_POS) + if(FOUND_POS EQUAL -1) + list(APPEND FILTERED_SOURCES ${SOURCE_FILE}) + endif() + endforeach() + set_source_files_properties(${FILTERED_SOURCES} PROPERTIES COMPILE_OPTIONS "${WARN_FLAGS_${CMAKE_C_COMPILER_ID}}") + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0 AND NO_WARN_RWX_SEGMENTS_SUPPORTED) + target_link_options(${TARGET} PRIVATE "LINKER:--no-warn-rwx-segments") + endif() + + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) + target_compile_options(${TARGET} PRIVATE -Wconversion) + endif() + + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) + target_compile_options(${TARGET} PRIVATE -Wcast-function-type -Wstrict-overflow) + endif() + + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0) + target_compile_options(${TARGET} PRIVATE -Wno-strict-aliasing) + endif() + endif() +endfunction() function(family_configure_target TARGET RTOS) if (RTOS STREQUAL noos OR RTOS STREQUAL "") @@ -204,7 +241,7 @@ function(family_configure_target TARGET RTOS) pico_enable_stdio_uart(${TARGET} 1) target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_board${RTOS_SUFFIX} tinyusb_additions) - family_flash_openocd(${TARGET}) + family_flash_openocd(${TARGET}) family_flash_jlink(${TARGET}) endfunction() @@ -359,34 +396,9 @@ function(suppress_tinyusb_warnings) ${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/hcd_rp2040.c ) foreach(SOURCE_FILE IN LISTS CONVERSION_WARNING_FILES) - set_source_files_properties( - ${SOURCE_FILE} - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") + set_source_files_properties(${SOURCE_FILE} PROPERTIES COMPILE_FLAGS "-Wno-conversion") endforeach() endif() - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 11.0) - set_source_files_properties( - ${PICO_TINYUSB_PATH}/lib/fatfs/source/ff.c - COMPILE_FLAGS "-Wno-stringop-overflow -Wno-array-bounds") - endif() - set_source_files_properties( - ${PICO_TINYUSB_PATH}/lib/fatfs/source/ff.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual") - - set_source_files_properties( - ${PICO_TINYUSB_PATH}/lib/lwip/src/core/tcp_in.c - ${PICO_TINYUSB_PATH}/lib/lwip/src/core/tcp_out.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") - - set_source_files_properties( - ${PICO_TINYUSB_PATH}/lib/networking/dnserver.c - ${PICO_TINYUSB_PATH}/lib/networking/dhserver.c - ${PICO_TINYUSB_PATH}/lib/networking/rndis_reports.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion -Wno-sign-conversion") if (TARGET tinyusb_pico_pio_usb) set_source_files_properties( diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index d59a2b4ee..90eb920e0 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -29,9 +29,20 @@ #if CFG_TUH_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && CFG_TUH_RPI_PIO_USB #include "pico.h" + #include "pio_usb.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#endif + #include "pio_usb_ll.h" +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + //--------------------------------------------------------------------+ // INCLUDE //--------------------------------------------------------------------+ -- cgit v1.3.1 From cc597d5cd55ee447d4f97b7f2a19d95c333426f5 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 28 Oct 2025 00:15:39 +0700 Subject: disable warning for startup file --- hw/bsp/at32f402_405/family.cmake | 4 +++- hw/bsp/at32f403a_407/family.cmake | 4 +++- hw/bsp/at32f413/family.cmake | 4 +++- hw/bsp/at32f415/family.cmake | 4 +++- hw/bsp/at32f423/family.cmake | 4 +++- hw/bsp/at32f425/family.cmake | 4 +++- hw/bsp/at32f435_437/family.cmake | 4 +++- hw/bsp/broadcom_32bit/family.cmake | 4 +++- hw/bsp/broadcom_64bit/family.cmake | 4 +++- hw/bsp/ch32v10x/family.cmake | 4 +++- hw/bsp/ch32v20x/family.cmake | 4 +++- hw/bsp/ch32v30x/family.cmake | 4 +++- hw/bsp/cxd56/family.cmake | 4 +++- hw/bsp/da1469x/family.cmake | 4 +++- hw/bsp/efm32/family.cmake | 4 +++- hw/bsp/f1c100s/family.cmake | 4 +++- hw/bsp/fomu/family.cmake | 4 +++- hw/bsp/gd32vf103/family.cmake | 4 +++- hw/bsp/imxrt/family.cmake | 4 +++- hw/bsp/kinetis_k/family.cmake | 4 +++- hw/bsp/kinetis_k32l2/family.cmake | 4 +++- hw/bsp/kinetis_kl/family.cmake | 4 +++- hw/bsp/lpc43/family.cmake | 4 +++- hw/bsp/lpc51/family.cmake | 4 +++- hw/bsp/lpc54/family.cmake | 4 +++- hw/bsp/lpc55/family.cmake | 4 +++- hw/bsp/maxim/family.cmake | 4 +++- hw/bsp/mcx/family.cmake | 4 +++- hw/bsp/mm32/family.cmake | 4 +++- hw/bsp/msp432e4/family.cmake | 4 +++- hw/bsp/nrf/family.cmake | 4 +++- hw/bsp/nuc100_120/family.cmake | 4 +++- hw/bsp/nuc121_125/family.cmake | 4 +++- hw/bsp/nuc126/family.cmake | 4 +++- hw/bsp/nuc505/family.cmake | 4 +++- hw/bsp/samd11/family.cmake | 4 +++- hw/bsp/samd2x_l2x/family.cmake | 4 +++- hw/bsp/samd5x_e5x/family.cmake | 4 +++- hw/bsp/same7x/family.cmake | 4 +++- hw/bsp/samg/family.cmake | 4 +++- hw/bsp/stm32c0/family.cmake | 4 +++- hw/bsp/stm32f0/family.cmake | 4 +++- hw/bsp/stm32f1/family.cmake | 4 +++- hw/bsp/stm32f2/family.cmake | 4 +++- hw/bsp/stm32f3/family.cmake | 4 +++- hw/bsp/stm32f4/family.cmake | 4 +++- hw/bsp/stm32f7/family.cmake | 4 +++- hw/bsp/stm32g0/family.cmake | 4 +++- hw/bsp/stm32g4/family.cmake | 4 +++- hw/bsp/stm32h5/family.cmake | 4 +++- hw/bsp/stm32h7/family.cmake | 4 +++- hw/bsp/stm32h7rs/family.cmake | 4 +++- hw/bsp/stm32l0/family.cmake | 4 +++- hw/bsp/stm32l4/family.cmake | 4 +++- hw/bsp/stm32n6/family.cmake | 4 +++- hw/bsp/stm32u0/family.cmake | 4 +++- hw/bsp/stm32u5/family.cmake | 4 +++- hw/bsp/stm32wb/family.cmake | 4 +++- hw/bsp/stm32wba/family.cmake | 4 +++- hw/bsp/xmc4000/family.cmake | 4 +++- 60 files changed, 180 insertions(+), 60 deletions(-) diff --git a/hw/bsp/at32f402_405/family.cmake b/hw/bsp/at32f402_405/family.cmake index 113bc0305..fa29fd2ed 100644 --- a/hw/bsp/at32f402_405/family.cmake +++ b/hw/bsp/at32f402_405/family.cmake @@ -111,7 +111,9 @@ function(family_configure_example TARGET RTOS) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/at32f403a_407/family.cmake b/hw/bsp/at32f403a_407/family.cmake index 5f539228d..953f2ca49 100644 --- a/hw/bsp/at32f403a_407/family.cmake +++ b/hw/bsp/at32f403a_407/family.cmake @@ -85,7 +85,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/at32f413/family.cmake b/hw/bsp/at32f413/family.cmake index d62964730..5e41a1621 100644 --- a/hw/bsp/at32f413/family.cmake +++ b/hw/bsp/at32f413/family.cmake @@ -85,7 +85,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/at32f415/family.cmake b/hw/bsp/at32f415/family.cmake index 35fad5a87..3c1b6b80c 100644 --- a/hw/bsp/at32f415/family.cmake +++ b/hw/bsp/at32f415/family.cmake @@ -85,7 +85,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/at32f423/family.cmake b/hw/bsp/at32f423/family.cmake index 36c0466de..8294914b6 100644 --- a/hw/bsp/at32f423/family.cmake +++ b/hw/bsp/at32f423/family.cmake @@ -87,7 +87,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/at32f425/family.cmake b/hw/bsp/at32f425/family.cmake index 176595e12..ef1ca5a83 100644 --- a/hw/bsp/at32f425/family.cmake +++ b/hw/bsp/at32f425/family.cmake @@ -85,7 +85,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/at32f435_437/family.cmake b/hw/bsp/at32f435_437/family.cmake index bdc7292d5..191a850aa 100644 --- a/hw/bsp/at32f435_437/family.cmake +++ b/hw/bsp/at32f435_437/family.cmake @@ -94,7 +94,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake index d681e4426..c92d79de8 100644 --- a/hw/bsp/broadcom_32bit/family.cmake +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -89,7 +89,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake index 1be5c95eb..5fabda524 100644 --- a/hw/bsp/broadcom_64bit/family.cmake +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -94,7 +94,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake index 843b7f9d3..0e4a38066 100644 --- a/hw/bsp/ch32v10x/family.cmake +++ b/hw/bsp/ch32v10x/family.cmake @@ -87,7 +87,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_openocd_wch(${TARGET}) diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index 1ce83bed9..b65a39f0a 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -118,7 +118,9 @@ function(family_configure_example TARGET RTOS) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/ch32v30x/family.cmake b/hw/bsp/ch32v30x/family.cmake index cbf86334e..d32666429 100644 --- a/hw/bsp/ch32v30x/family.cmake +++ b/hw/bsp/ch32v30x/family.cmake @@ -109,7 +109,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_openocd_wch(${TARGET}) diff --git a/hw/bsp/cxd56/family.cmake b/hw/bsp/cxd56/family.cmake index 6cfe04d93..5bc01c1dd 100644 --- a/hw/bsp/cxd56/family.cmake +++ b/hw/bsp/cxd56/family.cmake @@ -107,7 +107,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Build mkspk tool add_custom_command(OUTPUT ${MKSPK} diff --git a/hw/bsp/da1469x/family.cmake b/hw/bsp/da1469x/family.cmake index 473db6531..120a078d4 100644 --- a/hw/bsp/da1469x/family.cmake +++ b/hw/bsp/da1469x/family.cmake @@ -117,7 +117,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink_dialog(${TARGET}) diff --git a/hw/bsp/efm32/family.cmake b/hw/bsp/efm32/family.cmake index 36d88f071..2cd62612c 100644 --- a/hw/bsp/efm32/family.cmake +++ b/hw/bsp/efm32/family.cmake @@ -82,7 +82,9 @@ function(family_configure_example TARGET RTOS) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/f1c100s/family.cmake b/hw/bsp/f1c100s/family.cmake index 78fc3c6c7..ad4915f39 100644 --- a/hw/bsp/f1c100s/family.cmake +++ b/hw/bsp/f1c100s/family.cmake @@ -100,7 +100,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake index 18290d437..41c8239fa 100644 --- a/hw/bsp/fomu/family.cmake +++ b/hw/bsp/fomu/family.cmake @@ -70,7 +70,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) endfunction() diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake index c96882a75..fb292c28e 100644 --- a/hw/bsp/gd32vf103/family.cmake +++ b/hw/bsp/gd32vf103/family.cmake @@ -101,7 +101,9 @@ function(family_configure_example TARGET RTOS) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 7e21dd946..f07ac249f 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -132,7 +132,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake index 2ec5522d3..ef078836e 100644 --- a/hw/bsp/kinetis_k/family.cmake +++ b/hw/bsp/kinetis_k/family.cmake @@ -92,7 +92,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake index 022ddb424..75619b316 100644 --- a/hw/bsp/kinetis_k32l2/family.cmake +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -87,7 +87,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_flash_jlink(${TARGET}) family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 2640652ab..9e27106fe 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -91,7 +91,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index 5c68aaebf..878b0eecc 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -88,7 +88,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index 9e128ab82..8a35af416 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -99,7 +99,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index 3b16955da..efa6fd346 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -127,7 +127,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 6ebda4db9..9dab57113 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -129,7 +129,9 @@ function(family_configure_example TARGET RTOS) PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes -Wno-unused-parameter") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/maxim/family.cmake b/hw/bsp/maxim/family.cmake index 07171b8d5..7785598b8 100644 --- a/hw/bsp/maxim/family.cmake +++ b/hw/bsp/maxim/family.cmake @@ -176,7 +176,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index bff4c68a7..8e7cc9fc8 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -116,7 +116,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/mm32/family.cmake b/hw/bsp/mm32/family.cmake index 20431e41c..a08398bec 100644 --- a/hw/bsp/mm32/family.cmake +++ b/hw/bsp/mm32/family.cmake @@ -80,7 +80,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/msp432e4/family.cmake b/hw/bsp/msp432e4/family.cmake index 582faad67..a7f2ff2ac 100644 --- a/hw/bsp/msp432e4/family.cmake +++ b/hw/bsp/msp432e4/family.cmake @@ -80,7 +80,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_msp430flasher(${TARGET}) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 0c19d2155..ea19e79e7 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -153,7 +153,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing # family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/nuc100_120/family.cmake b/hw/bsp/nuc100_120/family.cmake index 594d29cd0..fe2ac7b54 100644 --- a/hw/bsp/nuc100_120/family.cmake +++ b/hw/bsp/nuc100_120/family.cmake @@ -79,6 +79,8 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/nuc121_125/family.cmake b/hw/bsp/nuc121_125/family.cmake index 1eb581347..22968510f 100644 --- a/hw/bsp/nuc121_125/family.cmake +++ b/hw/bsp/nuc121_125/family.cmake @@ -83,6 +83,8 @@ function(family_configure_example TARGET RTOS) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/nuc126/family.cmake b/hw/bsp/nuc126/family.cmake index 3226406da..f7f75442c 100644 --- a/hw/bsp/nuc126/family.cmake +++ b/hw/bsp/nuc126/family.cmake @@ -86,6 +86,8 @@ function(family_configure_example TARGET RTOS) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/nuc505/family.cmake b/hw/bsp/nuc505/family.cmake index eb6048d5c..5fe48e03c 100644 --- a/hw/bsp/nuc505/family.cmake +++ b/hw/bsp/nuc505/family.cmake @@ -82,6 +82,8 @@ function(family_configure_example TARGET RTOS) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake index 6cfb8238b..b4fe26e4d 100644 --- a/hw/bsp/samd11/family.cmake +++ b/hw/bsp/samd11/family.cmake @@ -88,7 +88,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/samd2x_l2x/family.cmake b/hw/bsp/samd2x_l2x/family.cmake index 091016e64..74766ddc8 100644 --- a/hw/bsp/samd2x_l2x/family.cmake +++ b/hw/bsp/samd2x_l2x/family.cmake @@ -138,7 +138,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/samd5x_e5x/family.cmake b/hw/bsp/samd5x_e5x/family.cmake index d5de26244..a92e79630 100644 --- a/hw/bsp/samd5x_e5x/family.cmake +++ b/hw/bsp/samd5x_e5x/family.cmake @@ -81,7 +81,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/same7x/family.cmake b/hw/bsp/same7x/family.cmake index cb11f21f3..67df075dc 100644 --- a/hw/bsp/same7x/family.cmake +++ b/hw/bsp/same7x/family.cmake @@ -90,7 +90,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/samg/family.cmake b/hw/bsp/samg/family.cmake index 6d7a6ba7f..8d3af4143 100644 --- a/hw/bsp/samg/family.cmake +++ b/hw/bsp/samg/family.cmake @@ -83,7 +83,9 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index 37b743654..78c921ae5 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -96,7 +96,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index 6f90f1a7a..fd2791ffe 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -93,7 +93,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index f2acba3ff..c95664c39 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -90,7 +90,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index b08e93e3c..18d2339e7 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -92,7 +92,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index b9aea10db..c2896ff90 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -90,7 +90,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index 327bf7bf3..b37196cfc 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -120,7 +120,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 2b9ca8cbb..29b235669 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -122,7 +122,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 065ec3a0e..ade644f60 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -93,7 +93,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index f0c0e5549..16f8ead79 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -91,7 +91,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index 7ad59dbd4..bbed6aafc 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -95,7 +95,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index 840391e0b..b55f2f575 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -121,7 +121,9 @@ function(family_configure_example TARGET RTOS) target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h7rs/family.cmake b/hw/bsp/stm32h7rs/family.cmake index b1253d7fe..da26b0b72 100644 --- a/hw/bsp/stm32h7rs/family.cmake +++ b/hw/bsp/stm32h7rs/family.cmake @@ -130,7 +130,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index 4d24a21a6..2030516e1 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -94,7 +94,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index e89035e8b..00f4bba3e 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -95,7 +95,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake index 587ebc0fb..a76ec50e2 100644 --- a/hw/bsp/stm32n6/family.cmake +++ b/hw/bsp/stm32n6/family.cmake @@ -129,7 +129,9 @@ function(family_configure_example TARGET RTOS) PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32u0/family.cmake b/hw/bsp/stm32u0/family.cmake index 0c9d92fae..2d640c997 100644 --- a/hw/bsp/stm32u0/family.cmake +++ b/hw/bsp/stm32u0/family.cmake @@ -95,7 +95,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 6bbeb1017..4de861706 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -97,7 +97,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index 461ce6ffd..90f3cd6d8 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -95,7 +95,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32wba/family.cmake b/hw/bsp/stm32wba/family.cmake index fab3d786b..0bc5578a0 100644 --- a/hw/bsp/stm32wba/family.cmake +++ b/hw/bsp/stm32wba/family.cmake @@ -110,7 +110,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/xmc4000/family.cmake b/hw/bsp/xmc4000/family.cmake index ffce97a8c..54b582b1f 100644 --- a/hw/bsp/xmc4000/family.cmake +++ b/hw/bsp/xmc4000/family.cmake @@ -79,7 +79,9 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON) + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) -- cgit v1.3.1 From 621123b9b3709bfd1768778f5d526498549eadae Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 28 Oct 2025 00:16:40 +0700 Subject: added .pvsconfig to exclude some rules --- .PVS-Studio/.pvsconfig | 1 + .github/workflows/static_analysis.yml | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) create mode 100644 .PVS-Studio/.pvsconfig diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig new file mode 100644 index 000000000..b722c6d10 --- /dev/null +++ b/.PVS-Studio/.pvsconfig @@ -0,0 +1 @@ +//-V::2506,2514 diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 83eea5283..5d2a6c962 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -137,7 +137,7 @@ jobs: mkdir -p build cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_BUILD_TYPE=MinSizeRel cmake --build build - pvs-studio-analyzer analyze -f build/compile_commands.json -j --exclude-path hw/mcu/ --exclude-path lib/ + pvs-studio-analyzer analyze -R .PVS-Studio/.pvsconfig -f build/compile_commands.json --exclude-path hw/mcu/ --exclude-path lib/ -j plog-converter -t sarif -o pvs-studio-${{ matrix.board }}.sarif PVS-Studio.log - name: Upload SARIF -- cgit v1.3.1 From a12806a6cd65b11476cde69628f92f64978f1c64 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 28 Oct 2025 00:17:26 +0700 Subject: fix descriptor warning when shifting zero --- examples/device/audio_4_channel_mic/src/usb_descriptors.c | 2 +- .../device/audio_4_channel_mic_freertos/src/usb_descriptors.c | 2 +- examples/device/audio_test/src/usb_descriptors.c | 2 +- examples/device/audio_test_freertos/src/usb_descriptors.c | 2 +- examples/device/audio_test_multi_rate/src/usb_descriptors.c | 2 +- examples/device/cdc_dual_ports/src/usb_descriptors.c | 2 +- examples/device/cdc_msc/src/usb_descriptors.c | 2 +- examples/device/cdc_msc_freertos/src/usb_descriptors.c | 2 +- examples/device/cdc_uac2/src/usb_descriptors.c | 2 +- examples/device/dfu/src/usb_descriptors.c | 2 +- examples/device/dfu_runtime/src/usb_descriptors.c | 2 +- examples/device/dynamic_configuration/src/usb_descriptors.c | 2 +- examples/device/hid_boot_interface/src/usb_descriptors.c | 2 +- examples/device/hid_composite/src/usb_descriptors.c | 2 +- examples/device/hid_composite_freertos/src/usb_descriptors.c | 2 +- examples/device/hid_generic_inout/src/usb_descriptors.c | 2 +- examples/device/hid_multiple_interface/src/usb_descriptors.c | 2 +- examples/device/midi_test/src/usb_descriptors.c | 2 +- examples/device/midi_test_freertos/src/usb_descriptors.c | 2 +- examples/device/msc_dual_lun/src/usb_descriptors.c | 2 +- examples/device/mtp/src/usb_descriptors.c | 2 +- examples/device/net_lwip_webserver/src/usb_descriptors.c | 2 +- examples/device/uac2_headset/src/usb_descriptors.c | 2 +- examples/device/uac2_speaker_fb/src/usb_descriptors.c | 2 +- examples/device/usbtmc/src/usb_descriptors.c | 2 +- examples/device/video_capture/src/usb_descriptors.c | 2 +- examples/device/video_capture_2ch/src/usb_descriptors.c | 2 +- examples/device/webusb_serial/src/usb_descriptors.c | 2 +- examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c | 2 +- examples/dual/host_info_to_device_cdc/src/usb_descriptors.c | 2 +- src/common/tusb_types.h | 10 +++++----- 31 files changed, 35 insertions(+), 35 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index c8abf491d..d48ee0d08 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) diff --git a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c index c8abf491d..d48ee0d08 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index 5e448002d..52ddc1bb2 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) diff --git a/examples/device/audio_test_freertos/src/usb_descriptors.c b/examples/device/audio_test_freertos/src/usb_descriptors.c index 5e448002d..52ddc1bb2 100644 --- a/examples/device/audio_test_freertos/src/usb_descriptors.c +++ b/examples/device/audio_test_freertos/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index e54af14fb..d1e801120 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -34,7 +34,7 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 6b3963814..34cdbfafb 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 4fe03f90e..c9b9a133a 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index bcfef48a7..58b39a2dd 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/cdc_uac2/src/usb_descriptors.c b/examples/device/cdc_uac2/src/usb_descriptors.c index 748c36b7b..19ed63b51 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.c +++ b/examples/device/cdc_uac2/src/usb_descriptors.c @@ -35,7 +35,7 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index 1550b70b8..a7fca87cd 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -33,7 +33,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c index c5cc9f92f..d64ad151f 100644 --- a/examples/device/dfu_runtime/src/usb_descriptors.c +++ b/examples/device/dfu_runtime/src/usb_descriptors.c @@ -33,7 +33,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 7660e59dd..4599c6f82 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index d9ce4ef09..a830dfea8 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -33,7 +33,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index 7b1f4f8d8..168f3f325 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -33,7 +33,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index 1d703beff..dd8682e64 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -33,7 +33,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index 1b5c055e6..b8bcda30e 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/hid_multiple_interface/src/usb_descriptors.c b/examples/device/hid_multiple_interface/src/usb_descriptors.c index 145836300..0c5645247 100644 --- a/examples/device/hid_multiple_interface/src/usb_descriptors.c +++ b/examples/device/hid_multiple_interface/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index 8cb235d30..da873479e 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/midi_test_freertos/src/usb_descriptors.c b/examples/device/midi_test_freertos/src/usb_descriptors.c index 8cb235d30..da873479e 100644 --- a/examples/device/midi_test_freertos/src/usb_descriptors.c +++ b/examples/device/midi_test_freertos/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index e3a0753b5..8fbbf0d90 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/mtp/src/usb_descriptors.c b/examples/device/mtp/src/usb_descriptors.c index ff35e0df3..db8b32a4d 100644 --- a/examples/device/mtp/src/usb_descriptors.c +++ b/examples/device/mtp/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] MTP | VENDOR | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) | _PID_MAP(MTP, 5)) diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 57ee3a218..5bd9ff0f3 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] NET | VENDOR | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) | _PID_MAP(ECM_RNDIS, 5) | _PID_MAP(NCM, 5) ) diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index d2f4f45b3..7aa0b17fc 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -34,7 +34,7 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.c b/examples/device/uac2_speaker_fb/src/usb_descriptors.c index cc904031b..29f7ea6d6 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.c +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.c @@ -38,7 +38,7 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) diff --git a/examples/device/usbtmc/src/usb_descriptors.c b/examples/device/usbtmc/src/usb_descriptors.c index d03c64102..747850593 100644 --- a/examples/device/usbtmc/src/usb_descriptors.c +++ b/examples/device/usbtmc/src/usb_descriptors.c @@ -34,7 +34,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index 775386c65..2fd1860c3 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -33,7 +33,7 @@ * Auto ProductID layout's Bitmap: * [MSB] VIDEO | AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VIDEO, 5) | _PID_MAP(VENDOR, 6) ) diff --git a/examples/device/video_capture_2ch/src/usb_descriptors.c b/examples/device/video_capture_2ch/src/usb_descriptors.c index 03fac2d5c..0d19c53cf 100644 --- a/examples/device/video_capture_2ch/src/usb_descriptors.c +++ b/examples/device/video_capture_2ch/src/usb_descriptors.c @@ -33,7 +33,7 @@ * Auto ProductID layout's Bitmap: * [MSB] VIDEO | AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VIDEO, 5) | _PID_MAP(VENDOR, 6) ) diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 044a6b294..8579190be 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -33,7 +33,7 @@ * Auto ProductID layout's Bitmap: * [MSB] MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c index c2377cb00..ca515b36e 100644 --- a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c index c2377cb00..ca515b36e 100644 --- a/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c @@ -32,7 +32,7 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) #define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index c0b7469ed..55f309af8 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -78,8 +78,8 @@ typedef enum { TUSB_ROLE_INVALID = 0u, - TUSB_ROLE_DEVICE = 0x1u, - TUSB_ROLE_HOST = 0x2u, + TUSB_ROLE_DEVICE = 0x1, + TUSB_ROLE_HOST = 0x2, } tusb_role_t; /// defined base on EHCI specs value for Endpoint Speed @@ -100,10 +100,10 @@ typedef enum { } tusb_xfer_type_t; typedef enum { - TUSB_DIR_OUT = 0u, - TUSB_DIR_IN = 1u, + TUSB_DIR_OUT = 0, + TUSB_DIR_IN = 1, - TUSB_DIR_IN_MASK = 0x80u + TUSB_DIR_IN_MASK = 0x80 } tusb_dir_t; enum { -- cgit v1.3.1 From 113a763bc3fe861ac7c20075b2ad29bb51f6fd01 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 28 Oct 2025 00:38:34 +0700 Subject: fix warning with strict prototypes warnings --- hw/bsp/at32f402_405/family.cmake | 4 ++-- hw/bsp/at32f403a_407/family.cmake | 4 ++-- hw/bsp/at32f413/family.cmake | 2 +- hw/bsp/at32f415/family.cmake | 2 +- hw/bsp/at32f423/family.cmake | 2 +- hw/bsp/at32f425/family.cmake | 2 +- hw/bsp/at32f435_437/family.cmake | 2 +- hw/bsp/broadcom_32bit/family.cmake | 4 ++-- hw/bsp/broadcom_64bit/family.cmake | 4 ++-- hw/bsp/ch32v10x/family.cmake | 3 ++- hw/bsp/ch32v20x/family.cmake | 3 +-- hw/bsp/ch32v30x/family.cmake | 3 ++- hw/bsp/cxd56/family.cmake | 2 +- hw/bsp/da1469x/family.cmake | 4 ++-- hw/bsp/efm32/family.cmake | 4 ++-- hw/bsp/f1c100s/family.cmake | 3 ++- hw/bsp/fomu/family.cmake | 4 ++-- hw/bsp/gd32vf103/family.cmake | 16 ++++++++++++++-- hw/bsp/imxrt/family.cmake | 4 ++-- hw/bsp/kinetis_k/family.cmake | 4 ++-- hw/bsp/kinetis_k32l2/family.cmake | 4 ++-- hw/bsp/kinetis_kl/family.cmake | 4 ++-- hw/bsp/lpc51/family.cmake | 4 ++-- hw/bsp/lpc54/family.cmake | 4 ++-- hw/bsp/lpc55/family.cmake | 4 ++-- hw/bsp/maxim/family.cmake | 4 ++-- hw/bsp/mcx/family.cmake | 4 ++-- hw/bsp/mm32/family.cmake | 4 ++-- hw/bsp/msp432e4/family.cmake | 4 ++-- hw/bsp/nrf/family.cmake | 4 ++-- hw/bsp/nuc100_120/family.cmake | 7 ++++++- hw/bsp/nuc121_125/family.cmake | 8 ++++++-- hw/bsp/nuc126/family.cmake | 8 ++++++-- hw/bsp/nuc505/family.cmake | 8 ++++++-- hw/bsp/samd11/family.cmake | 4 ++-- hw/bsp/samd2x_l2x/family.cmake | 4 ++-- hw/bsp/samd5x_e5x/family.cmake | 4 ++-- hw/bsp/same7x/family.cmake | 4 ++-- hw/bsp/samg/family.cmake | 4 ++-- hw/bsp/stm32c0/family.cmake | 4 ++-- hw/bsp/stm32f0/family.cmake | 4 ++-- hw/bsp/stm32f1/family.cmake | 4 ++-- hw/bsp/stm32f2/family.cmake | 4 ++-- hw/bsp/stm32f3/family.cmake | 4 ++-- hw/bsp/stm32f4/family.cmake | 4 ++-- hw/bsp/stm32f7/family.cmake | 4 ++-- hw/bsp/stm32g0/family.cmake | 4 ++-- hw/bsp/stm32g4/family.cmake | 4 ++-- hw/bsp/stm32h5/family.cmake | 4 ++-- hw/bsp/stm32h7/family.cmake | 4 ++-- hw/bsp/stm32h7rs/family.cmake | 4 ++-- hw/bsp/stm32l0/family.cmake | 4 ++-- hw/bsp/stm32l4/family.cmake | 4 ++-- hw/bsp/stm32n6/family.cmake | 4 ++-- hw/bsp/stm32u0/family.cmake | 4 ++-- hw/bsp/stm32u5/family.cmake | 4 ++-- hw/bsp/stm32wb/family.cmake | 4 ++-- hw/bsp/stm32wba/family.cmake | 4 ++-- hw/bsp/tm4c/family.cmake | 4 +--- hw/bsp/xmc4000/family.cmake | 4 ++-- src/portable/nuvoton/nuc121/dcd_nuc121.c | 10 ++++++++++ src/portable/nuvoton/nuc505/dcd_nuc505.c | 10 ++++++++++ 62 files changed, 160 insertions(+), 111 deletions(-) diff --git a/hw/bsp/at32f402_405/family.cmake b/hw/bsp/at32f402_405/family.cmake index fa29fd2ed..87869cfe9 100644 --- a/hw/bsp/at32f402_405/family.cmake +++ b/hw/bsp/at32f402_405/family.cmake @@ -110,10 +110,10 @@ function(family_configure_example TARGET RTOS) ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/at32f403a_407/family.cmake b/hw/bsp/at32f403a_407/family.cmake index 953f2ca49..498b89c1a 100644 --- a/hw/bsp/at32f403a_407/family.cmake +++ b/hw/bsp/at32f403a_407/family.cmake @@ -84,10 +84,10 @@ function(family_configure_example TARGET RTOS) "LINKER:--config=${LD_FILE_IAR}" ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/at32f413/family.cmake b/hw/bsp/at32f413/family.cmake index 5e41a1621..02692daf5 100644 --- a/hw/bsp/at32f413/family.cmake +++ b/hw/bsp/at32f413/family.cmake @@ -85,7 +85,7 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) diff --git a/hw/bsp/at32f415/family.cmake b/hw/bsp/at32f415/family.cmake index 3c1b6b80c..f28da6f47 100644 --- a/hw/bsp/at32f415/family.cmake +++ b/hw/bsp/at32f415/family.cmake @@ -85,7 +85,7 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) diff --git a/hw/bsp/at32f423/family.cmake b/hw/bsp/at32f423/family.cmake index 8294914b6..3c666b132 100644 --- a/hw/bsp/at32f423/family.cmake +++ b/hw/bsp/at32f423/family.cmake @@ -87,7 +87,7 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) diff --git a/hw/bsp/at32f425/family.cmake b/hw/bsp/at32f425/family.cmake index ef1ca5a83..39d98a220 100644 --- a/hw/bsp/at32f425/family.cmake +++ b/hw/bsp/at32f425/family.cmake @@ -85,7 +85,7 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) diff --git a/hw/bsp/at32f435_437/family.cmake b/hw/bsp/at32f435_437/family.cmake index 191a850aa..32a401bb6 100644 --- a/hw/bsp/at32f435_437/family.cmake +++ b/hw/bsp/at32f435_437/family.cmake @@ -94,7 +94,7 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake index c92d79de8..3f327861b 100644 --- a/hw/bsp/broadcom_32bit/family.cmake +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -88,10 +88,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake index 5fabda524..6294ebafd 100644 --- a/hw/bsp/broadcom_64bit/family.cmake +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -93,10 +93,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake index 0e4a38066..fb9ccb3a3 100644 --- a/hw/bsp/ch32v10x/family.cmake +++ b/hw/bsp/ch32v10x/family.cmake @@ -87,9 +87,10 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_openocd_wch(${TARGET}) diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index b65a39f0a..d8c7c5327 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -117,8 +117,7 @@ function(family_configure_example TARGET RTOS) ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) diff --git a/hw/bsp/ch32v30x/family.cmake b/hw/bsp/ch32v30x/family.cmake index d32666429..b974bd5e7 100644 --- a/hw/bsp/ch32v30x/family.cmake +++ b/hw/bsp/ch32v30x/family.cmake @@ -109,9 +109,10 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_openocd_wch(${TARGET}) diff --git a/hw/bsp/cxd56/family.cmake b/hw/bsp/cxd56/family.cmake index 5bc01c1dd..7cd2f51f8 100644 --- a/hw/bsp/cxd56/family.cmake +++ b/hw/bsp/cxd56/family.cmake @@ -107,7 +107,7 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) diff --git a/hw/bsp/da1469x/family.cmake b/hw/bsp/da1469x/family.cmake index 120a078d4..40070ba10 100644 --- a/hw/bsp/da1469x/family.cmake +++ b/hw/bsp/da1469x/family.cmake @@ -116,10 +116,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink_dialog(${TARGET}) diff --git a/hw/bsp/efm32/family.cmake b/hw/bsp/efm32/family.cmake index 2cd62612c..8c521eee0 100644 --- a/hw/bsp/efm32/family.cmake +++ b/hw/bsp/efm32/family.cmake @@ -81,10 +81,10 @@ function(family_configure_example TARGET RTOS) ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/f1c100s/family.cmake b/hw/bsp/f1c100s/family.cmake index ad4915f39..5522eeec7 100644 --- a/hw/bsp/f1c100s/family.cmake +++ b/hw/bsp/f1c100s/family.cmake @@ -100,9 +100,10 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake index 41c8239fa..ac3c0c446 100644 --- a/hw/bsp/fomu/family.cmake +++ b/hw/bsp/fomu/family.cmake @@ -69,10 +69,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) endfunction() diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake index fb292c28e..76f520ea8 100644 --- a/hw/bsp/gd32vf103/family.cmake +++ b/hw/bsp/gd32vf103/family.cmake @@ -100,10 +100,22 @@ function(family_configure_example TARGET RTOS) ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties( + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${SOC_DIR}/Common/Source/Stubs/sbrk.c + ${SOC_DIR}/Common/Source/Stubs/close.c + ${SOC_DIR}/Common/Source/Stubs/isatty.c + ${SOC_DIR}/Common/Source/Stubs/fstat.c + ${SOC_DIR}/Common/Source/Stubs/lseek.c + ${SOC_DIR}/Common/Source/Stubs/read.c + PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index f07ac249f..100deba1f 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -131,10 +131,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake index ef078836e..e1b5c221e 100644 --- a/hw/bsp/kinetis_k/family.cmake +++ b/hw/bsp/kinetis_k/family.cmake @@ -91,10 +91,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake index 75619b316..110335ab2 100644 --- a/hw/bsp/kinetis_k32l2/family.cmake +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -86,10 +86,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_flash_jlink(${TARGET}) family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 9e27106fe..230a3057d 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -90,10 +90,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index 8a35af416..1823b64fc 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -98,10 +98,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index efa6fd346..c6145bd41 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -126,10 +126,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 9dab57113..3477d9f10 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -128,10 +128,10 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes -Wno-unused-parameter") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/maxim/family.cmake b/hw/bsp/maxim/family.cmake index 7785598b8..d890113e6 100644 --- a/hw/bsp/maxim/family.cmake +++ b/hw/bsp/maxim/family.cmake @@ -175,11 +175,11 @@ function(family_configure_example TARGET RTOS) endif () set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 8e7cc9fc8..d062cec16 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -115,10 +115,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/mm32/family.cmake b/hw/bsp/mm32/family.cmake index a08398bec..04961d6c3 100644 --- a/hw/bsp/mm32/family.cmake +++ b/hw/bsp/mm32/family.cmake @@ -79,10 +79,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/msp432e4/family.cmake b/hw/bsp/msp432e4/family.cmake index a7f2ff2ac..6725eedac 100644 --- a/hw/bsp/msp432e4/family.cmake +++ b/hw/bsp/msp432e4/family.cmake @@ -79,10 +79,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_msp430flasher(${TARGET}) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index ea19e79e7..4e999b636 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -152,10 +152,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing # family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/nuc100_120/family.cmake b/hw/bsp/nuc100_120/family.cmake index fe2ac7b54..f81447596 100644 --- a/hw/bsp/nuc100_120/family.cmake +++ b/hw/bsp/nuc100_120/family.cmake @@ -79,8 +79,13 @@ function(family_configure_example TARGET RTOS) ) endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES + COMPILE_FLAGS "-Wno-missing-prototypes -Wno-redundant-decls") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/nuc121_125/family.cmake b/hw/bsp/nuc121_125/family.cmake index 22968510f..718f8db9a 100644 --- a/hw/bsp/nuc121_125/family.cmake +++ b/hw/bsp/nuc121_125/family.cmake @@ -82,9 +82,13 @@ function(family_configure_example TARGET RTOS) ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES + COMPILE_FLAGS "-Wno-missing-prototypes -Wno-redundant-decls") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/nuc126/family.cmake b/hw/bsp/nuc126/family.cmake index f7f75442c..3fc670cf0 100644 --- a/hw/bsp/nuc126/family.cmake +++ b/hw/bsp/nuc126/family.cmake @@ -85,9 +85,13 @@ function(family_configure_example TARGET RTOS) ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES + COMPILE_FLAGS "-Wno-missing-prototypes -Wno-redundant-decls") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/nuc505/family.cmake b/hw/bsp/nuc505/family.cmake index 5fe48e03c..a31f5ff73 100644 --- a/hw/bsp/nuc505/family.cmake +++ b/hw/bsp/nuc505/family.cmake @@ -81,9 +81,13 @@ function(family_configure_example TARGET RTOS) ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES + COMPILE_FLAGS "-Wno-missing-prototypes -Wno-redundant-decls") + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + family_flash_openocd_nuvoton(${TARGET}) endfunction() diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake index b4fe26e4d..982cef792 100644 --- a/hw/bsp/samd11/family.cmake +++ b/hw/bsp/samd11/family.cmake @@ -87,10 +87,10 @@ function(family_configure_example TARGET RTOS) "LINKER:--config=${LD_FILE_IAR}" ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/samd2x_l2x/family.cmake b/hw/bsp/samd2x_l2x/family.cmake index 74766ddc8..76371ccdc 100644 --- a/hw/bsp/samd2x_l2x/family.cmake +++ b/hw/bsp/samd2x_l2x/family.cmake @@ -137,10 +137,10 @@ function(family_configure_example TARGET RTOS) "LINKER:--config=${LD_FILE_IAR}" ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/samd5x_e5x/family.cmake b/hw/bsp/samd5x_e5x/family.cmake index a92e79630..bb022ab76 100644 --- a/hw/bsp/samd5x_e5x/family.cmake +++ b/hw/bsp/samd5x_e5x/family.cmake @@ -80,10 +80,10 @@ function(family_configure_example TARGET RTOS) "LINKER:--config=${LD_FILE_IAR}" ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/same7x/family.cmake b/hw/bsp/same7x/family.cmake index 67df075dc..a9c9de413 100644 --- a/hw/bsp/same7x/family.cmake +++ b/hw/bsp/same7x/family.cmake @@ -89,10 +89,10 @@ function(family_configure_example TARGET RTOS) "LINKER:--config=${LD_FILE_IAR}" ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/samg/family.cmake b/hw/bsp/samg/family.cmake index 8d3af4143..c07e20b90 100644 --- a/hw/bsp/samg/family.cmake +++ b/hw/bsp/samg/family.cmake @@ -82,11 +82,11 @@ function(family_configure_example TARGET RTOS) "LINKER:--config=${LD_FILE_IAR}" ) endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index 78c921ae5..90d5322b7 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -95,11 +95,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index fd2791ffe..ee73ae872 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -92,11 +92,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index c95664c39..064f32096 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -89,11 +89,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index 18d2339e7..7152a0679 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -91,11 +91,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index c2896ff90..7c9e97e62 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -89,11 +89,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index b37196cfc..0d3d9ec93 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -119,11 +119,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 29b235669..d405753d4 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -121,11 +121,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index ade644f60..572f0e644 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -92,11 +92,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 16f8ead79..7e8b319b8 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -90,11 +90,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index bbed6aafc..6e63c4072 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -94,11 +94,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index b55f2f575..8b6086356 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -120,11 +120,11 @@ function(family_configure_example TARGET RTOS) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32h7rs/family.cmake b/hw/bsp/stm32h7rs/family.cmake index da26b0b72..1fd1cb057 100644 --- a/hw/bsp/stm32h7rs/family.cmake +++ b/hw/bsp/stm32h7rs/family.cmake @@ -129,11 +129,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index 2030516e1..b6b0139a0 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -93,11 +93,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 00f4bba3e..5bc28dd5d 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -94,11 +94,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake index a76ec50e2..6aec26f99 100644 --- a/hw/bsp/stm32n6/family.cmake +++ b/hw/bsp/stm32n6/family.cmake @@ -128,11 +128,11 @@ function(family_configure_example TARGET RTOS) set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32u0/family.cmake b/hw/bsp/stm32u0/family.cmake index 2d640c997..4f9b03109 100644 --- a/hw/bsp/stm32u0/family.cmake +++ b/hw/bsp/stm32u0/family.cmake @@ -94,11 +94,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 4de861706..70e0c313c 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -96,11 +96,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index 90f3cd6d8..1a96e3d7e 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -94,11 +94,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32wba/family.cmake b/hw/bsp/stm32wba/family.cmake index 0bc5578a0..9628913cc 100644 --- a/hw/bsp/stm32wba/family.cmake +++ b/hw/bsp/stm32wba/family.cmake @@ -109,11 +109,11 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_stlink(${TARGET}) diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index 936dcffa1..12f0448a3 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -72,11 +72,9 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON - COMPILE_FLAGS "-Wno-cast-qual" - ) + COMPILE_OPTIONS -w) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/xmc4000/family.cmake b/hw/bsp/xmc4000/family.cmake index 54b582b1f..a8fa5351c 100644 --- a/hw/bsp/xmc4000/family.cmake +++ b/hw/bsp/xmc4000/family.cmake @@ -78,10 +78,10 @@ function(family_configure_example TARGET RTOS) if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON COMPILE_OPTIONS -w) + # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/src/portable/nuvoton/nuc121/dcd_nuc121.c b/src/portable/nuvoton/nuc121/dcd_nuc121.c index 37210ea34..804a35565 100644 --- a/src/portable/nuvoton/nuc121/dcd_nuc121.c +++ b/src/portable/nuvoton/nuc121/dcd_nuc121.c @@ -38,8 +38,18 @@ #if CFG_TUD_ENABLED && ( (CFG_TUSB_MCU == OPT_MCU_NUC121) || (CFG_TUSB_MCU == OPT_MCU_NUC126) ) #include "device/dcd.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + #include "NuMicro.h" +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + // Since TinyUSB doesn't use SOF for now, and this interrupt too often (1ms interval) // We disable SOF for now until needed later on #ifndef USE_SOF diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c index fa457d861..6195015ae 100644 --- a/src/portable/nuvoton/nuc505/dcd_nuc505.c +++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c @@ -38,8 +38,18 @@ #if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_NUC505) #include "device/dcd.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + #include "NUC505Series.h" +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + /* * The DMA functionality of the USBD peripheral does not appear to succeed with * transfer lengths that are longer (> 64 bytes) and are not a multiple of 4. -- cgit v1.3.1 From 417f44acab92c42338b584bd0511e51781ff2821 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 28 Oct 2025 13:03:28 +0700 Subject: fix security in gh action --- .github/actions/get_deps/action.yml | 4 ++- .github/actions/setup_toolchain/action.yml | 10 ++++--- .../actions/setup_toolchain/download/action.yml | 31 +++++++++++++--------- .../actions/setup_toolchain/espressif/action.yml | 14 +++++++--- 4 files changed, 38 insertions(+), 21 deletions(-) diff --git a/.github/actions/get_deps/action.yml b/.github/actions/get_deps/action.yml index b0d6d1066..a84db893b 100644 --- a/.github/actions/get_deps/action.yml +++ b/.github/actions/get_deps/action.yml @@ -26,7 +26,9 @@ runs: shell: bash - name: Get Dependencies + env: + ARG: ${{ inputs.arg }} run: | - python3 tools/get_deps.py ${{ inputs.arg }} + python3 tools/get_deps.py ${ARG} echo "PICO_SDK_PATH=${{ github.workspace }}/pico-sdk" >> $GITHUB_ENV shell: bash diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index 6fd5c9d4e..292fd172d 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -30,8 +30,10 @@ runs: inputs.toolchain != 'arm-gcc' && inputs.toolchain != 'esp-idf' id: set-toolchain-url + env: + TOOLCHAIN: ${{ inputs.toolchain }} run: | - TOOLCHAIN_URL=$(jq -r '."${{ inputs.toolchain }}"' .github/actions/setup_toolchain/toolchain.json) + TOOLCHAIN_URL=$(jq -r '."$TOOLCHAIN"' .github/actions/setup_toolchain/toolchain.json) echo "toolchain_url=$TOOLCHAIN_URL" echo "toolchain_url=$TOOLCHAIN_URL" >> $GITHUB_OUTPUT shell: bash @@ -47,11 +49,13 @@ runs: - name: Set toolchain option id: set-toolchain-option + env: + TOOLCHAIN: ${{ inputs.toolchain }} run: | BUILD_OPTION="" - if [[ "${{ inputs.toolchain }}" == *"clang"* ]]; then + if [[ "$TOOLCHAIN" == *"clang"* ]]; then BUILD_OPTION="--toolchain clang" - elif [[ "${{ inputs.toolchain }}" == "arm-iar" ]]; then + elif [[ "$TOOLCHAIN" == "arm-iar" ]]; then BUILD_OPTION="--toolchain iar" fi echo "build_option=$BUILD_OPTION" diff --git a/.github/actions/setup_toolchain/download/action.yml b/.github/actions/setup_toolchain/download/action.yml index 514b38f19..af7a9ad4e 100644 --- a/.github/actions/setup_toolchain/download/action.yml +++ b/.github/actions/setup_toolchain/download/action.yml @@ -21,29 +21,34 @@ runs: - name: Install Toolchain if: steps.cache-toolchain-download.outputs.cache-hit != 'true' + env: + TOOLCHAIN: ${{ inputs.toolchain }} + TOOLCHAIN_URL: ${{ inputs.toolchain_url }} run: | - mkdir -p ~/cache/${{ inputs.toolchain }} + mkdir -p ~/cache/${TOOLCHAIN} - if [[ ${{ inputs.toolchain }} == rx-gcc ]]; then - wget --progress=dot:giga ${{ inputs.toolchain_url }} -O toolchain.run + if [[ ${TOOLCHAIN} == rx-gcc ]]; then + wget --progress=dot:giga ${TOOLCHAIN_URL} -O toolchain.run chmod +x toolchain.run - ./toolchain.run -p ~/cache/${{ inputs.toolchain }}/gnurx -y - elif [[ ${{ inputs.toolchain }} == arm-iar ]]; then - wget --progress=dot:giga https://netstorage.iar.com/FileStore/STANDARD/001/003/926/iar-lmsc-tools_1.8_amd64.deb -O ~/cache/${{ inputs.toolchain }}/iar-lmsc-tools.deb - wget --progress=dot:giga ${{ inputs.toolchain_url }} -O ~/cache/${{ inputs.toolchain }}/cxarm.deb + ./toolchain.run -p ~/cache/${TOOLCHAIN}/gnurx -y + elif [[ ${TOOLCHAIN} == arm-iar ]]; then + wget --progress=dot:giga https://netstorage.iar.com/FileStore/STANDARD/001/003/926/iar-lmsc-tools_1.8_amd64.deb -O ~/cache/${TOOLCHAIN}/iar-lmsc-tools.deb + wget --progress=dot:giga ${TOOLCHAIN_URL} -O ~/cache/${TOOLCHAIN}/cxarm.deb else - wget --progress=dot:giga ${{ inputs.toolchain_url }} -O toolchain.tar.gz - tar -C ~/cache/${{ inputs.toolchain }} -xaf toolchain.tar.gz + wget --progress=dot:giga ${TOOLCHAIN_URL} -O toolchain.tar.gz + tar -C ~/cache/${TOOLCHAIN} -xaf toolchain.tar.gz fi shell: bash - name: Setup Toolchain + env: + TOOLCHAIN: ${{ inputs.toolchain }} run: | - if [[ ${{ inputs.toolchain }} == arm-iar ]]; then - sudo dpkg -i ~/cache/${{ inputs.toolchain }}/iar-lmsc-tools.deb - sudo apt install -y ~/cache/${{ inputs.toolchain }}/cxarm.deb + if [[ ${TOOLCHAIN} == arm-iar ]]; then + sudo dpkg -i ~/cache/${TOOLCHAIN}/iar-lmsc-tools.deb + sudo apt install -y ~/cache/${TOOLCHAIN}/cxarm.deb echo >> $GITHUB_PATH "/opt/iar/cxarm/arm/bin" else - echo >> $GITHUB_PATH `echo ~/cache/${{ inputs.toolchain }}/*/bin` + echo >> $GITHUB_PATH `echo ~/cache/${TOOLCHAIN}/*/bin` fi shell: bash diff --git a/.github/actions/setup_toolchain/espressif/action.yml b/.github/actions/setup_toolchain/espressif/action.yml index b50ffd41d..e9d645ac8 100644 --- a/.github/actions/setup_toolchain/espressif/action.yml +++ b/.github/actions/setup_toolchain/espressif/action.yml @@ -13,8 +13,10 @@ runs: using: "composite" steps: - name: Set DOCKER_ESP_IDF + env: + TOOLCHAIN: ${{ inputs.toolchain }} run: | - DOCKER_ESP_IDF=$HOME/cache/${{ inputs.toolchain }}/docker_image.tar + DOCKER_ESP_IDF=$HOME/cache/${TOOLCHAIN}/docker_image.tar echo "DOCKER_ESP_IDF=$DOCKER_ESP_IDF" >> $GITHUB_ENV shell: bash @@ -27,10 +29,12 @@ runs: - name: Pull and Save Docker Image if: steps.cache-toolchain-espressif.outputs.cache-hit != 'true' + env: + TOOLCHAIN_VERSION: ${{ inputs.toolchain_version }} run: | - docker pull espressif/idf:${{ inputs.toolchain_version }} + docker pull espressif/idf:${TOOLCHAIN_VERSION} mkdir -p $(dirname $DOCKER_ESP_IDF) - docker save -o $DOCKER_ESP_IDF espressif/idf:${{ inputs.toolchain_version }} + docker save -o $DOCKER_ESP_IDF espressif/idf:${TOOLCHAIN_VERSION} du -sh $DOCKER_ESP_IDF shell: bash @@ -42,7 +46,9 @@ runs: shell: bash - name: Tag Local Image + env: + TOOLCHAIN_VERSION: ${{ inputs.toolchain_version }} run: | - docker tag espressif/idf:${{ inputs.toolchain_version }} espressif/idf:tinyusb + docker tag espressif/idf:${TOOLCHAIN_VERSION} espressif/idf:tinyusb docker images shell: bash -- cgit v1.3.1 From d92b810df7670aae0e195fd02abef5014470c2f7 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 28 Oct 2025 13:21:38 +0700 Subject: fix Identifiers that start with '__' or '_[A-Z]' are reserved. fix compiling with nuc family --- .github/actions/setup_toolchain/action.yml | 2 +- .../device/audio_4_channel_mic/src/tusb_config.h | 6 +- .../audio_4_channel_mic/src/usb_descriptors.c | 6 +- .../audio_4_channel_mic_freertos/src/tusb_config.h | 6 +- .../src/usb_descriptors.c | 6 +- examples/device/audio_test/src/tusb_config.h | 6 +- examples/device/audio_test/src/usb_descriptors.c | 6 +- .../device/audio_test_freertos/src/tusb_config.h | 6 +- .../audio_test_freertos/src/usb_descriptors.c | 6 +- .../device/audio_test_multi_rate/src/tusb_config.h | 6 +- .../audio_test_multi_rate/src/usb_descriptors.c | 6 +- examples/device/board_test/src/tusb_config.h | 6 +- examples/device/cdc_dual_ports/src/tusb_config.h | 6 +- .../device/cdc_dual_ports/src/usb_descriptors.c | 6 +- examples/device/cdc_msc/src/msc_disk.c | 99 +++++++++++----------- examples/device/cdc_msc/src/tusb_config.h | 6 +- examples/device/cdc_msc/src/usb_descriptors.c | 6 +- examples/device/cdc_msc_freertos/src/tusb_config.h | 6 +- .../device/cdc_msc_freertos/src/usb_descriptors.c | 6 +- examples/device/cdc_uac2/src/tusb_config.h | 6 +- examples/device/cdc_uac2/src/usb_descriptors.c | 6 +- examples/device/dfu/src/usb_descriptors.c | 6 +- examples/device/dfu_runtime/src/usb_descriptors.c | 6 +- .../device/dynamic_configuration/src/tusb_config.h | 6 +- .../dynamic_configuration/src/usb_descriptors.c | 6 +- .../device/hid_boot_interface/src/tusb_config.h | 6 +- .../hid_boot_interface/src/usb_descriptors.c | 6 +- examples/device/hid_composite/src/tusb_config.h | 6 +- .../device/hid_composite/src/usb_descriptors.c | 6 +- .../hid_composite_freertos/src/tusb_config.h | 6 +- .../hid_composite_freertos/src/usb_descriptors.c | 6 +- .../device/hid_generic_inout/src/tusb_config.h | 6 +- .../device/hid_generic_inout/src/usb_descriptors.c | 6 +- .../hid_multiple_interface/src/tusb_config.h | 6 +- .../hid_multiple_interface/src/usb_descriptors.c | 6 +- examples/device/midi_test/src/tusb_config.h | 6 +- examples/device/midi_test/src/usb_descriptors.c | 6 +- .../device/midi_test_freertos/src/tusb_config.h | 6 +- .../midi_test_freertos/src/usb_descriptors.c | 6 +- examples/device/msc_dual_lun/src/tusb_config.h | 6 +- examples/device/msc_dual_lun/src/usb_descriptors.c | 6 +- examples/device/mtp/src/tusb_config.h | 6 +- examples/device/mtp/src/usb_descriptors.c | 6 +- .../device/net_lwip_webserver/src/tusb_config.h | 6 +- .../net_lwip_webserver/src/usb_descriptors.c | 6 +- examples/device/uac2_headset/src/tusb_config.h | 6 +- examples/device/uac2_headset/src/usb_descriptors.c | 6 +- examples/device/uac2_speaker_fb/src/tusb_config.h | 6 +- .../device/uac2_speaker_fb/src/usb_descriptors.c | 6 +- examples/device/usbtmc/src/usb_descriptors.c | 6 +- examples/device/video_capture/src/tusb_config.h | 6 +- .../device/video_capture/src/usb_descriptors.c | 6 +- .../device/video_capture_2ch/src/tusb_config.h | 6 +- .../device/video_capture_2ch/src/usb_descriptors.c | 6 +- examples/device/webusb_serial/src/tusb_config.h | 6 +- .../device/webusb_serial/src/usb_descriptors.c | 6 +- .../host_hid_to_device_cdc/src/usb_descriptors.c | 6 +- .../host_info_to_device_cdc/src/usb_descriptors.c | 6 +- examples/host/cdc_msc_hid/src/tusb_config.h | 6 +- .../host/cdc_msc_hid_freertos/src/tusb_config.h | 6 +- examples/host/hid_controller/src/tusb_config.h | 6 +- examples/host/msc_file_explorer/src/tusb_config.h | 6 +- examples/typec/power_delivery/src/tusb_config.h | 6 +- hw/bsp/ansi_escape.h | 6 +- hw/bsp/nuc100_120/family.cmake | 12 ++- hw/bsp/nuc121_125/family.cmake | 12 +-- hw/bsp/nuc126/family.cmake | 12 +-- hw/bsp/nuc505/family.cmake | 12 +-- lib/rt-thread/tusb_config.h | 6 +- src/class/audio/audio.h | 4 +- src/class/audio/audio_device.h | 2 +- src/class/bth/bth_device.h | 6 +- src/class/cdc/cdc.h | 4 +- src/class/cdc/cdc_device.h | 2 +- src/class/cdc/cdc_host.h | 6 +- src/class/cdc/cdc_rndis.h | 6 +- src/class/cdc/cdc_rndis_host.h | 6 +- src/class/dfu/dfu.h | 6 +- src/class/dfu/dfu_device.h | 6 +- src/class/dfu/dfu_rt_device.h | 6 +- src/class/hid/hid.h | 6 +- src/class/hid/hid_host.h | 6 +- src/class/midi/midi_device.h | 6 +- src/class/msc/msc.h | 6 +- src/class/msc/msc_device.h | 6 +- src/class/net/ncm.h | 4 +- src/class/net/net_device.h | 6 +- src/class/usbtmc/usbtmc.h | 4 +- src/class/vendor/vendor_device.h | 6 +- src/class/vendor/vendor_host.h | 6 +- src/common/tusb_common.h | 6 +- src/common/tusb_compiler.h | 18 ++-- src/common/tusb_debug.h | 6 +- src/common/tusb_fifo.h | 6 +- src/device/usbd.h | 6 +- src/host/hcd.h | 4 +- src/host/usbh.h | 6 +- src/host/usbh_pvt.h | 4 +- src/osal/osal.h | 6 +- src/osal/osal_none.h | 2 +- src/portable/ehci/ehci.h | 6 +- src/portable/ehci/ehci_api.h | 4 +- src/portable/nxp/lpc17_40/dcd_lpc17_40.h | 4 +- src/portable/ohci/ohci.h | 6 +- src/portable/renesas/rusb2/rusb2_type.h | 6 +- src/portable/sunxi/musb_def.h | 4 +- src/portable/synopsys/dwc2/dwc2_bcm.h | 4 +- src/portable/valentyusb/eptri/dcd_eptri.h | 6 +- src/tusb.h | 6 +- src/tusb_option.h | 6 +- src/typec/pd_types.h | 4 +- src/typec/tcd.h | 4 +- src/typec/usbc.h | 6 +- test/fuzz/device/cdc/src/tusb_config.h | 6 +- test/fuzz/device/cdc/src/usb_descriptors.cc | 6 +- test/fuzz/device/msc/src/tusb_config.h | 6 +- test/fuzz/device/msc/src/usb_descriptors.cc | 6 +- test/fuzz/device/net/src/tusb_config.h | 6 +- test/fuzz/device/net/src/usb_descriptors.cc | 6 +- test/unit-test/test/support/tusb_config.h | 6 +- 120 files changed, 404 insertions(+), 405 deletions(-) diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index 292fd172d..d15a29f20 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -33,7 +33,7 @@ runs: env: TOOLCHAIN: ${{ inputs.toolchain }} run: | - TOOLCHAIN_URL=$(jq -r '."$TOOLCHAIN"' .github/actions/setup_toolchain/toolchain.json) + TOOLCHAIN_URL=$(jq -r --arg tc "$TOOLCHAIN" '.[$tc]' .github/actions/setup_toolchain/toolchain.json) echo "toolchain_url=$TOOLCHAIN_URL" echo "toolchain_url=$TOOLCHAIN_URL" >> $GITHUB_OUTPUT shell: bash diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 0ee3ba2d0..8ead5c8b0 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -123,4 +123,4 @@ extern "C" { } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index d48ee0d08..73f856fc8 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VENDOR, 5) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index d973be2af..dd7cc7eff 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -129,4 +129,4 @@ extern "C" { } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c index d48ee0d08..73f856fc8 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VENDOR, 5) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 10bf53809..2efec5124 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -122,4 +122,4 @@ extern "C" { } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index 52ddc1bb2..5f0f587b3 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VENDOR, 5) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index c9dc50082..4dad6c2b9 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -128,4 +128,4 @@ extern "C" { } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/audio_test_freertos/src/usb_descriptors.c b/examples/device/audio_test_freertos/src/usb_descriptors.c index 52ddc1bb2..5f0f587b3 100644 --- a/examples/device/audio_test_freertos/src/usb_descriptors.c +++ b/examples/device/audio_test_freertos/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VENDOR, 5) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index b48c0a0be..7ce235df0 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -138,4 +138,4 @@ extern "C" { } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index d1e801120..11e5d2127 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -34,9 +34,9 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VENDOR, 5) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 81829d450..97ec65f66 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -74,4 +74,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index 7f7df3909..0da4032a7 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -110,4 +110,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 34cdbfafb..dd0aefaea 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index b39f5efa1..1a95f7f8b 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -58,63 +58,64 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { // drive_number = 0x80; media_type = 0xf8; extended_boot_signature = 0x29; // filesystem_type = "FAT12 "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC"; // FAT magic code at offset 510-511 -{ - 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, - 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T', 'i', 'n', 'y', 'U', - 'S', 'B', ' ', 'M', 'S', 'C', 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, - - // Zero up to 2 last bytes of FAT magic code - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA}, + { + 0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00, + 0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T', 'i', 'n', 'y', 'U', + 'S', 'B', ' ', 'M', 'S', 'C', 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00, + + // Zero up to 2 last bytes of FAT magic code + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA + }, //------------- Block1: FAT12 Table -------------// -{ - 0xF8, 0xFF, 0xFF, 0xFF, 0x0F// // first 2 entries must be F8FF, third entry is cluster end of readme file + { + 0xF8, 0xFF, 0xFF, 0xFF, 0x0F// first 2 entries must be F8FF, third entry is cluster end of readme file }, //------------- Block2: Root Directory -------------// -{ - // first entry is volume label - 'T', 'i', 'n', 'y', 'U', 'S', 'B', ' ', 'M', 'S', 'C', 0x08, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - // second entry is readme file - 'R', 'E', 'A', 'D', 'M', 'E', ' ', ' ', 'T', 'X', 'T', 0x20, 0x00, 0xC6, 0x52, 0x6D, - 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, - sizeof(README_CONTENTS) - 1, 0x00, 0x00, 0x00// readme's files size (4 Bytes) + { + // first entry is volume label + 'T', 'i', 'n', 'y', 'U', 'S', 'B', ' ', 'M', 'S', 'C', 0x08, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + // second entry is readme file + 'R', 'E', 'A', 'D', 'M', 'E', ' ', ' ', 'T', 'X', 'T', 0x20, 0x00, 0xC6, 0x52, 0x6D, + 0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00, + sizeof(README_CONTENTS) - 1, 0x00, 0x00, 0x00// readme's files size (4 Bytes) }, //------------- Block3: Readme Content -------------// - README_CONTENTS + {README_CONTENTS} }; // Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 811d464e9..fdb2ddf18 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -113,4 +113,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index c9b9a133a..c668ea3a7 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 9cc3a18d1..6b1937a8d 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -120,4 +120,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 58b39a2dd..4950f02e0 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index 2e744f8d2..bd1dfc688 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -24,8 +24,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -171,4 +171,4 @@ extern "C" { } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/cdc_uac2/src/usb_descriptors.c b/examples/device/cdc_uac2/src/usb_descriptors.c index 19ed63b51..252b602ac 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.c +++ b/examples/device/cdc_uac2/src/usb_descriptors.c @@ -35,9 +35,9 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VENDOR, 5) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index a7fca87cd..14ec315ea 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -33,9 +33,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c index d64ad151f..1d46ee252 100644 --- a/examples/device/dfu_runtime/src/usb_descriptors.c +++ b/examples/device/dfu_runtime/src/usb_descriptors.c @@ -33,9 +33,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h index b9b3878cc..7309d97c9 100644 --- a/examples/device/dynamic_configuration/src/tusb_config.h +++ b/examples/device/dynamic_configuration/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -112,4 +112,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 4599c6f82..083279938 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) // Configuration mode // 0 : enumerated as CDC/MIDI. Board button is not pressed when enumerating diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index 52723e09f..5d6fd62e1 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -104,4 +104,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index a830dfea8..9b4becc85 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -33,9 +33,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index 6bd32c427..895745ed2 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -104,4 +104,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index 168f3f325..46e4b63f9 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -33,9 +33,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index b28033a0c..ad067ac82 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -111,4 +111,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index dd8682e64..a745c17b5 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -33,9 +33,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h index 98143ac4d..58dc52afc 100644 --- a/examples/device/hid_generic_inout/src/tusb_config.h +++ b/examples/device/hid_generic_inout/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -104,4 +104,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index b8bcda30e..f26333d50 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/hid_multiple_interface/src/tusb_config.h b/examples/device/hid_multiple_interface/src/tusb_config.h index 49dc962fe..e1805017d 100644 --- a/examples/device/hid_multiple_interface/src/tusb_config.h +++ b/examples/device/hid_multiple_interface/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -104,4 +104,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/hid_multiple_interface/src/usb_descriptors.c b/examples/device/hid_multiple_interface/src/usb_descriptors.c index 0c5645247..cd2d93c44 100644 --- a/examples/device/hid_multiple_interface/src/usb_descriptors.c +++ b/examples/device/hid_multiple_interface/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h index 314dde438..f4282b2d7 100644 --- a/examples/device/midi_test/src/tusb_config.h +++ b/examples/device/midi_test/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -105,4 +105,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index da873479e..e969f33a3 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/midi_test_freertos/src/tusb_config.h b/examples/device/midi_test_freertos/src/tusb_config.h index 0ffdc37fb..c158f5197 100644 --- a/examples/device/midi_test_freertos/src/tusb_config.h +++ b/examples/device/midi_test_freertos/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -105,4 +105,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/midi_test_freertos/src/usb_descriptors.c b/examples/device/midi_test_freertos/src/usb_descriptors.c index da873479e..e969f33a3 100644 --- a/examples/device/midi_test_freertos/src/usb_descriptors.c +++ b/examples/device/midi_test_freertos/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h index 9cbbbade9..4fb6816c6 100644 --- a/examples/device/msc_dual_lun/src/tusb_config.h +++ b/examples/device/msc_dual_lun/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -104,4 +104,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index 8fbbf0d90..f73935ee0 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/mtp/src/tusb_config.h b/examples/device/mtp/src/tusb_config.h index 4d166aa63..95cc048ee 100644 --- a/examples/device/mtp/src/tusb_config.h +++ b/examples/device/mtp/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -136,4 +136,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/mtp/src/usb_descriptors.c b/examples/device/mtp/src/usb_descriptors.c index db8b32a4d..f0aa3de6b 100644 --- a/examples/device/mtp/src/usb_descriptors.c +++ b/examples/device/mtp/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] MTP | VENDOR | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) | _PID_MAP(MTP, 5)) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | PID_MAP(MTP, 5)) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h index 31731ac1b..3285ea52c 100644 --- a/examples/device/net_lwip_webserver/src/tusb_config.h +++ b/examples/device/net_lwip_webserver/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -141,4 +141,4 @@ extern "C" { } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 5bd9ff0f3..1bc568983 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] NET | VENDOR | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) | _PID_MAP(ECM_RNDIS, 5) | _PID_MAP(NCM, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5) ) // String Descriptor Index enum diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index e9165163b..2678054e1 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -24,8 +24,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -165,4 +165,4 @@ extern "C" { } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index 7aa0b17fc..7b1a41161 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -34,9 +34,9 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VENDOR, 5) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/uac2_speaker_fb/src/tusb_config.h b/examples/device/uac2_speaker_fb/src/tusb_config.h index 18ab2ff96..153b056bf 100644 --- a/examples/device/uac2_speaker_fb/src/tusb_config.h +++ b/examples/device/uac2_speaker_fb/src/tusb_config.h @@ -24,8 +24,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -162,4 +162,4 @@ extern "C" { } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.c b/examples/device/uac2_speaker_fb/src/usb_descriptors.c index 29f7ea6d6..c74eb90dc 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.c +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.c @@ -38,9 +38,9 @@ * Auto ProductID layout's Bitmap: * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VENDOR, 5) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/device/usbtmc/src/usb_descriptors.c b/examples/device/usbtmc/src/usb_descriptors.c index 747850593..16bd176f8 100644 --- a/examples/device/usbtmc/src/usb_descriptors.c +++ b/examples/device/usbtmc/src/usb_descriptors.c @@ -34,9 +34,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) #define USB_VID 0xcafe #define USB_BCD 0x0200 diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 4ba86ca65..390152e16 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -115,4 +115,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index 2fd1860c3..114dd5722 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -33,9 +33,9 @@ * Auto ProductID layout's Bitmap: * [MSB] VIDEO | AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VIDEO, 5) | _PID_MAP(VENDOR, 6) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VIDEO, 5) | PID_MAP(VENDOR, 6) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index e84e49879..48ab4d20a 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -117,4 +117,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/video_capture_2ch/src/usb_descriptors.c b/examples/device/video_capture_2ch/src/usb_descriptors.c index 0d19c53cf..024d16e07 100644 --- a/examples/device/video_capture_2ch/src/usb_descriptors.c +++ b/examples/device/video_capture_2ch/src/usb_descriptors.c @@ -33,9 +33,9 @@ * Auto ProductID layout's Bitmap: * [MSB] VIDEO | AUDIO | MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VIDEO, 5) | _PID_MAP(VENDOR, 6) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(AUDIO, 4) | PID_MAP(VIDEO, 5) | PID_MAP(VENDOR, 6) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index b86ad3752..b6cdf7e56 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -111,4 +111,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 8579190be..0ef41a68e 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -33,9 +33,9 @@ * Auto ProductID layout's Bitmap: * [MSB] MIDI | HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) //--------------------------------------------------------------------+ // Device Descriptors diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c index ca515b36e..3efa30e20 100644 --- a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c index ca515b36e..3efa30e20 100644 --- a/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c @@ -32,9 +32,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 2f8cb5e03..75de3511c 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -134,4 +134,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 3cdb227e2..8583e7176 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -139,4 +139,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index 351fe0178..a5c202fda 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -119,4 +119,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index c1829c300..a9d24c89f 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -118,4 +118,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/typec/power_delivery/src/tusb_config.h b/examples/typec/power_delivery/src/tusb_config.h index f7cb3cc04..ee013d056 100644 --- a/examples/typec/power_delivery/src/tusb_config.h +++ b/examples/typec/power_delivery/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -80,4 +80,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/hw/bsp/ansi_escape.h b/hw/bsp/ansi_escape.h index 15af2f3ab..0b72bea17 100644 --- a/hw/bsp/ansi_escape.h +++ b/hw/bsp/ansi_escape.h @@ -28,8 +28,8 @@ * \defgroup group_ansi_esc ANSI Escape Code * @{ */ -#ifndef _TUSB_ANSI_ESC_CODE_H_ -#define _TUSB_ANSI_ESC_CODE_H_ +#ifndef TUSB_ANSI_ESC_CODE_H_ +#define TUSB_ANSI_ESC_CODE_H_ #ifdef __cplusplus @@ -92,6 +92,6 @@ } #endif -#endif /* _TUSB_ANSI_ESC_CODE_H_ */ +#endif /* TUSB_ANSI_ESC_CODE_H_ */ /** @} */ diff --git a/hw/bsp/nuc100_120/family.cmake b/hw/bsp/nuc100_120/family.cmake index f81447596..b8f36bb9b 100644 --- a/hw/bsp/nuc100_120/family.cmake +++ b/hw/bsp/nuc100_120/family.cmake @@ -69,19 +69,17 @@ function(family_configure_example TARGET RTOS) "LINKER:--script=${LD_FILE_GNU}" --specs=nosys.specs --specs=nano.specs ) + target_compile_options(${TARGET} PRIVATE -Wno-redundant-decls) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_Clang}") + target_compile_options(${TARGET} PRIVATE -Wno-redundant-decls) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) + target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}") endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES - COMPILE_FLAGS "-Wno-missing-prototypes -Wno-redundant-decls") + COMPILE_FLAGS "-Wno-missing-prototypes") endif () set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES SKIP_LINTING ON diff --git a/hw/bsp/nuc121_125/family.cmake b/hw/bsp/nuc121_125/family.cmake index 718f8db9a..ee52e9ce4 100644 --- a/hw/bsp/nuc121_125/family.cmake +++ b/hw/bsp/nuc121_125/family.cmake @@ -72,14 +72,14 @@ function(family_configure_example TARGET RTOS) "LINKER:--script=${LD_FILE_GNU}" --specs=nosys.specs --specs=nano.specs ) + target_compile_options(${TARGET} PRIVATE -Wno-redundant-decls) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_Clang}") + target_compile_options(${TARGET} PRIVATE -Wno-redundant-decls) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) + target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}") endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") diff --git a/hw/bsp/nuc126/family.cmake b/hw/bsp/nuc126/family.cmake index 3fc670cf0..d0f99ba1a 100644 --- a/hw/bsp/nuc126/family.cmake +++ b/hw/bsp/nuc126/family.cmake @@ -75,14 +75,14 @@ function(family_configure_example TARGET RTOS) "LINKER:--script=${LD_FILE_GNU}" --specs=nosys.specs --specs=nano.specs ) + target_compile_options(${TARGET} PRIVATE -Wno-redundant-decls) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_Clang}") + target_compile_options(${TARGET} PRIVATE -Wno-redundant-decls) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) + target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}") endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") diff --git a/hw/bsp/nuc505/family.cmake b/hw/bsp/nuc505/family.cmake index a31f5ff73..581cad4d0 100644 --- a/hw/bsp/nuc505/family.cmake +++ b/hw/bsp/nuc505/family.cmake @@ -71,14 +71,14 @@ function(family_configure_example TARGET RTOS) "LINKER:--script=${LD_FILE_GNU}" --specs=nosys.specs --specs=nano.specs ) + target_compile_options(${TARGET} PRIVATE -Wno-redundant-decls) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) + target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_Clang}") + target_compile_options(${TARGET} PRIVATE -Wno-redundant-decls) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) + target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}") endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") diff --git a/lib/rt-thread/tusb_config.h b/lib/rt-thread/tusb_config.h index 11dc21983..6f794dc41 100644 --- a/lib/rt-thread/tusb_config.h +++ b/lib/rt-thread/tusb_config.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __RTTHREAD__ #include @@ -215,4 +215,4 @@ extern "C" { #endif #endif /*__RTTHREAD__*/ -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index 0d1acadcc..fc352a1af 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -30,8 +30,8 @@ * Currently only MIDI subclass is supported * @{ */ -#ifndef _TUSB_AUDIO_H__ -#define _TUSB_AUDIO_H__ +#ifndef TUSB_AUDIO_H__ +#define TUSB_AUDIO_H__ #include "common/tusb_common.h" diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 00948767e..b22a918f4 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -462,7 +462,7 @@ void audiod_sof_isr (uint8_t rhport, uint32_t frame_count); } #endif -#endif /* _TUSB_AUDIO_DEVICE_H_ */ +#endif /* TUSB_AUDIO_DEVICE_H_ */ /** @} */ /** @} */ diff --git a/src/class/bth/bth_device.h b/src/class/bth/bth_device.h index 68f073bff..89a056dc8 100755 --- a/src/class/bth/bth_device.h +++ b/src/class/bth/bth_device.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_BTH_DEVICE_H_ -#define _TUSB_BTH_DEVICE_H_ +#ifndef TUSB_BTH_DEVICE_H_ +#define TUSB_BTH_DEVICE_H_ #include #include @@ -114,4 +114,4 @@ bool btd_xfer_cb (uint8_t rhport, uint8_t edpt_addr, xfer_result_t r } #endif -#endif /* _TUSB_BTH_DEVICE_H_ */ +#endif /* TUSB_BTH_DEVICE_H_ */ diff --git a/src/class/cdc/cdc.h b/src/class/cdc/cdc.h index 10ba16a7c..6d207c717 100644 --- a/src/class/cdc/cdc.h +++ b/src/class/cdc/cdc.h @@ -29,8 +29,8 @@ * Currently only Abstract Control Model subclass is supported * @{ */ -#ifndef _TUSB_CDC_H__ -#define _TUSB_CDC_H__ +#ifndef TUSB_CDC_H__ +#define TUSB_CDC_H__ #include "common/tusb_common.h" diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index 9673b9807..c321f3d16 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -257,4 +257,4 @@ bool cdcd_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t re } #endif -#endif /* _TUSB_CDC_DEVICE_H_ */ +#endif /* TUSB_CDC_DEVICE_H_ */ diff --git a/src/class/cdc/cdc_host.h b/src/class/cdc/cdc_host.h index bf6711d7e..e8637beac 100644 --- a/src/class/cdc/cdc_host.h +++ b/src/class/cdc/cdc_host.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_CDC_HOST_H_ -#define _TUSB_CDC_HOST_H_ +#ifndef TUSB_CDC_HOST_H_ +#define TUSB_CDC_HOST_H_ #include "cdc.h" @@ -255,4 +255,4 @@ void cdch_close (uint8_t dev_addr); } #endif -#endif /* _TUSB_CDC_HOST_H_ */ +#endif /* TUSB_CDC_HOST_H_ */ diff --git a/src/class/cdc/cdc_rndis.h b/src/class/cdc/cdc_rndis.h index ad153e0ac..fbbd43206 100644 --- a/src/class/cdc/cdc_rndis.h +++ b/src/class/cdc/cdc_rndis.h @@ -30,8 +30,8 @@ * \defgroup CDC_RNDIS_Common Common Definitions * @{ */ -#ifndef _TUSB_CDC_RNDIS_H_ -#define _TUSB_CDC_RNDIS_H_ +#ifndef TUSB_CDC_RNDIS_H_ +#define TUSB_CDC_RNDIS_H_ #include "cdc.h" @@ -295,7 +295,7 @@ typedef enum } #endif -#endif /* _TUSB_CDC_RNDIS_H_ */ +#endif /* TUSB_CDC_RNDIS_H_ */ /** @} */ /** @} */ diff --git a/src/class/cdc/cdc_rndis_host.h b/src/class/cdc/cdc_rndis_host.h index bb431ec1f..e70d27f79 100644 --- a/src/class/cdc/cdc_rndis_host.h +++ b/src/class/cdc/cdc_rndis_host.h @@ -28,8 +28,8 @@ * \defgroup CDC_RNSID_Host Host * @{ */ -#ifndef _TUSB_CDC_RNDIS_HOST_H_ -#define _TUSB_CDC_RNDIS_HOST_H_ +#ifndef TUSB_CDC_RNDIS_HOST_H_ +#define TUSB_CDC_RNDIS_HOST_H_ #include "common/tusb_common.h" #include "host/usbh.h" @@ -58,6 +58,6 @@ void rndish_close(uint8_t dev_addr); } #endif -#endif /* _TUSB_CDC_RNDIS_HOST_H_ */ +#endif /* TUSB_CDC_RNDIS_HOST_H_ */ /** @} */ diff --git a/src/class/dfu/dfu.h b/src/class/dfu/dfu.h index 114c827b8..8cd63656a 100644 --- a/src/class/dfu/dfu.h +++ b/src/class/dfu/dfu.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_DFU_H_ -#define _TUSB_DFU_H_ +#ifndef TUSB_DFU_H_ +#define TUSB_DFU_H_ #include "common/tusb_common.h" @@ -116,4 +116,4 @@ TU_VERIFY_STATIC( sizeof(dfu_status_response_t) == 6, "size is not correct"); } #endif -#endif /* _TUSB_DFU_H_ */ +#endif /* TUSB_DFU_H_ */ diff --git a/src/class/dfu/dfu_device.h b/src/class/dfu/dfu_device.h index e59e61ce9..b22b4c450 100644 --- a/src/class/dfu/dfu_device.h +++ b/src/class/dfu/dfu_device.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_DFU_DEVICE_H_ -#define _TUSB_DFU_DEVICE_H_ +#ifndef TUSB_DFU_DEVICE_H_ +#define TUSB_DFU_DEVICE_H_ #include "dfu.h" @@ -96,4 +96,4 @@ bool dfu_moded_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_r } #endif -#endif /* _TUSB_DFU_MODE_DEVICE_H_ */ +#endif /* TUSB_DFU_MODE_DEVICE_H_ */ diff --git a/src/class/dfu/dfu_rt_device.h b/src/class/dfu/dfu_rt_device.h index 67eb26d95..c4116d8fe 100644 --- a/src/class/dfu/dfu_rt_device.h +++ b/src/class/dfu/dfu_rt_device.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_DFU_RT_DEVICE_H_ -#define _TUSB_DFU_RT_DEVICE_H_ +#ifndef TUSB_DFU_RT_DEVICE_H_ +#define TUSB_DFU_RT_DEVICE_H_ #include "dfu.h" @@ -52,4 +52,4 @@ bool dfu_rtd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_req } #endif -#endif /* _TUSB_DFU_RT_DEVICE_H_ */ +#endif /* TUSB_DFU_RT_DEVICE_H_ */ diff --git a/src/class/hid/hid.h b/src/class/hid/hid.h index b69f623a0..0883d95ac 100644 --- a/src/class/hid/hid.h +++ b/src/class/hid/hid.h @@ -28,8 +28,8 @@ * \defgroup ClassDriver_HID Human Interface Device (HID) * @{ */ -#ifndef _TUSB_HID_H_ -#define _TUSB_HID_H_ +#ifndef TUSB_HID_H_ +#define TUSB_HID_H_ #include "common/tusb_common.h" @@ -2071,6 +2071,6 @@ enum { } #endif -#endif /* _TUSB_HID_H__ */ +#endif /* TUSB_HID_H__ */ /// @} diff --git a/src/class/hid/hid_host.h b/src/class/hid/hid_host.h index 032827af1..87f0e7dc9 100644 --- a/src/class/hid/hid_host.h +++ b/src/class/hid/hid_host.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_HID_HOST_H_ -#define _TUSB_HID_HOST_H_ +#ifndef TUSB_HID_HOST_H_ +#define TUSB_HID_HOST_H_ #include "hid.h" @@ -182,4 +182,4 @@ void hidh_close(uint8_t dev_addr); } #endif -#endif /* _TUSB_HID_HOST_H_ */ +#endif /* TUSB_HID_HOST_H_ */ diff --git a/src/class/midi/midi_device.h b/src/class/midi/midi_device.h index c2c6e9859..d23516cec 100644 --- a/src/class/midi/midi_device.h +++ b/src/class/midi/midi_device.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_MIDI_DEVICE_H_ -#define _TUSB_MIDI_DEVICE_H_ +#ifndef TUSB_MIDI_DEVICE_H_ +#define TUSB_MIDI_DEVICE_H_ #include "class/audio/audio.h" #include "midi.h" @@ -168,7 +168,7 @@ bool midid_xfer_cb (uint8_t rhport, uint8_t edpt_addr, xfer_result_t } #endif -#endif /* _TUSB_MIDI_DEVICE_H_ */ +#endif /* TUSB_MIDI_DEVICE_H_ */ /** @} */ /** @} */ diff --git a/src/class/msc/msc.h b/src/class/msc/msc.h index b2b44eac4..3b5d4a855 100644 --- a/src/class/msc/msc.h +++ b/src/class/msc/msc.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_MSC_H_ -#define _TUSB_MSC_H_ +#ifndef TUSB_MSC_H_ +#define TUSB_MSC_H_ #include "common/tusb_common.h" @@ -398,4 +398,4 @@ TU_VERIFY_STATIC(sizeof(scsi_write10_t) == 10, "size is not correct"); } #endif -#endif /* _TUSB_MSC_H_ */ +#endif /* TUSB_MSC_H_ */ diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index 7d898e988..21e24971b 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_MSC_DEVICE_H_ -#define _TUSB_MSC_DEVICE_H_ +#ifndef TUSB_MSC_DEVICE_H_ +#define TUSB_MSC_DEVICE_H_ #include "common/tusb_common.h" #include "msc.h" @@ -167,4 +167,4 @@ bool mscd_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t ev } #endif -#endif /* _TUSB_MSC_DEVICE_H_ */ +#endif /* TUSB_MSC_DEVICE_H_ */ diff --git a/src/class/net/ncm.h b/src/class/net/ncm.h index 0245a87f2..8989fe0b4 100644 --- a/src/class/net/ncm.h +++ b/src/class/net/ncm.h @@ -25,8 +25,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_NCM_H_ -#define _TUSB_NCM_H_ +#ifndef TUSB_NCM_H_ +#define TUSB_NCM_H_ #include "common/tusb_common.h" diff --git a/src/class/net/net_device.h b/src/class/net/net_device.h index ef5ecffc8..96c03fd61 100644 --- a/src/class/net/net_device.h +++ b/src/class/net/net_device.h @@ -25,8 +25,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_NET_DEVICE_H_ -#define _TUSB_NET_DEVICE_H_ +#ifndef TUSB_NET_DEVICE_H_ +#define TUSB_NET_DEVICE_H_ #include #include "class/cdc/cdc.h" @@ -114,4 +114,4 @@ void netd_report (uint8_t *buf, uint16_t len); } #endif -#endif /* _TUSB_NET_DEVICE_H_ */ +#endif /* TUSB_NET_DEVICE_H_ */ diff --git a/src/class/usbtmc/usbtmc.h b/src/class/usbtmc/usbtmc.h index 327de087c..3bf5e1a17 100644 --- a/src/class/usbtmc/usbtmc.h +++ b/src/class/usbtmc/usbtmc.h @@ -25,8 +25,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_USBTMC_H__ -#define _TUSB_USBTMC_H__ +#ifndef TUSB_USBTMC_H__ +#define TUSB_USBTMC_H__ #include "common/tusb_common.h" diff --git a/src/class/vendor/vendor_device.h b/src/class/vendor/vendor_device.h index 5fe4fc9ff..5376f3917 100644 --- a/src/class/vendor/vendor_device.h +++ b/src/class/vendor/vendor_device.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_VENDOR_DEVICE_H_ -#define _TUSB_VENDOR_DEVICE_H_ +#ifndef TUSB_VENDOR_DEVICE_H_ +#define TUSB_VENDOR_DEVICE_H_ #include "common/tusb_common.h" @@ -141,4 +141,4 @@ bool vendord_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, u } #endif -#endif /* _TUSB_VENDOR_DEVICE_H_ */ +#endif /* TUSB_VENDOR_DEVICE_H_ */ diff --git a/src/class/vendor/vendor_host.h b/src/class/vendor/vendor_host.h index acfebe7a4..00e3c3402 100644 --- a/src/class/vendor/vendor_host.h +++ b/src/class/vendor/vendor_host.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_VENDOR_HOST_H_ -#define _TUSB_VENDOR_HOST_H_ +#ifndef TUSB_VENDOR_HOST_H_ +#define TUSB_VENDOR_HOST_H_ #include "common/tusb_common.h" @@ -64,4 +64,4 @@ void cush_close(uint8_t dev_addr); } #endif -#endif /* _TUSB_VENDOR_HOST_H_ */ +#endif /* TUSB_VENDOR_HOST_H_ */ diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index dfa9299c1..04149da71 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_COMMON_H_ -#define _TUSB_COMMON_H_ +#ifndef TUSB_COMMON_H_ +#define TUSB_COMMON_H_ #ifdef __cplusplus extern "C" { @@ -391,4 +391,4 @@ uint8_t const * tu_desc_find3(uint8_t const* desc, uint8_t const* end, uint8_t b } #endif -#endif /* _TUSB_COMMON_H_ */ +#endif /* TUSB_COMMON_H_ */ diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 9b33a6f61..55950fb45 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -29,8 +29,8 @@ * \brief Group_Compiler brief * @{ */ -#ifndef _TUSB_COMPILER_H_ -#define _TUSB_COMPILER_H_ +#ifndef TUSB_COMPILER_H_ +#define TUSB_COMPILER_H_ #define TU_TOKEN(x) x #define TU_STRING(x) #x ///< stringify without expand @@ -45,9 +45,9 @@ #define TU_INCLUDE_PATH(_dir,_file) TU_XSTRING( TU_TOKEN(_dir)TU_TOKEN(_file) ) #if defined __COUNTER__ && __COUNTER__ != __COUNTER__ - #define _TU_COUNTER_ __COUNTER__ + #define TU_COUNTER __COUNTER__ #else - #define _TU_COUNTER_ __LINE__ + #define TU_COUNTER __LINE__ #endif // Compile-time Assert @@ -56,9 +56,9 @@ #elif defined (__STDC_VERSION__) && __STDC_VERSION__ >= 201112L #define TU_VERIFY_STATIC _Static_assert #elif defined(__CCRX__) - #define TU_VERIFY_STATIC(const_expr, _mess) typedef char TU_XSTRCAT(_verify_static_, _TU_COUNTER_)[(const_expr) ? 1 : 0]; + #define TU_VERIFY_STATIC(const_expr, _mess) typedef char TU_XSTRCAT(_verify_static_, TU_COUNTER)[(const_expr) ? 1 : 0]; #else - #define TU_VERIFY_STATIC(const_expr, _mess) enum { TU_XSTRCAT(_verify_static_, _TU_COUNTER_) = 1/(!!(const_expr)) } + #define TU_VERIFY_STATIC(const_expr, _mess) enum { TU_XSTRCAT(_verify_static_, TU_COUNTER) = 1/(!!(const_expr)) } #endif /* --------------------- Fuzzing types -------------------------------------- */ @@ -68,8 +68,8 @@ #define tu_static static #endif -// for declaration of reserved field, make use of _TU_COUNTER_ -#define TU_RESERVED TU_XSTRCAT(reserved, _TU_COUNTER_) +// for declaration of reserved field, make use of TU_COUNTER +#define TU_RESERVED TU_XSTRCAT(reserved, TU_COUNTER) #define TU_LITTLE_ENDIAN (0x12u) #define TU_BIG_ENDIAN (0x21u) @@ -305,6 +305,6 @@ #error Byte order is undefined #endif -#endif /* _TUSB_COMPILER_H_ */ +#endif /* TUSB_COMPILER_H_ */ /// @} diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 86517b9c9..e3f9d3f18 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_DEBUG_H_ -#define _TUSB_DEBUG_H_ +#ifndef TUSB_DEBUG_H_ +#define TUSB_DEBUG_H_ #ifdef __cplusplus extern "C" { @@ -168,4 +168,4 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 } #endif -#endif /* _TUSB_DEBUG_H_ */ +#endif diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 879acda4f..f2a6c5469 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -25,8 +25,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_FIFO_H_ -#define _TUSB_FIFO_H_ +#ifndef TUSB_FIFO_H_ +#define TUSB_FIFO_H_ #ifdef __cplusplus extern "C" { @@ -196,4 +196,4 @@ void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info); } #endif -#endif /* _TUSB_FIFO_H_ */ +#endif diff --git a/src/device/usbd.h b/src/device/usbd.h index c62986150..f75803b14 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_USBD_H_ -#define _TUSB_USBD_H_ +#ifndef TUSB_USBD_H_ +#define TUSB_USBD_H_ #include "common/tusb_common.h" @@ -904,6 +904,6 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ } #endif -#endif /* _TUSB_USBD_H_ */ +#endif /* TUSB_USBD_H_ */ /** @} */ diff --git a/src/host/hcd.h b/src/host/hcd.h index d3551bf5b..4a17326ec 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_HCD_H_ -#define _TUSB_HCD_H_ +#ifndef TUSB_HCD_H_ +#define TUSB_HCD_H_ #include "common/tusb_common.h" #include "osal/osal.h" diff --git a/src/host/usbh.h b/src/host/usbh.h index 8d48bf90d..4b6747848 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_USBH_H_ -#define _TUSB_USBH_H_ +#ifndef TUSB_USBH_H_ +#define TUSB_USBH_H_ #ifdef __cplusplus extern "C" { @@ -179,7 +179,7 @@ TU_ATTR_ALWAYS_INLINE static inline void tuh_task(void) { // Check if there is pending events need processing by tuh_task() bool tuh_task_event_ready(void); -#ifndef _TUSB_HCD_H_ +#ifndef TUSB_HCD_H_ extern void hcd_int_handler(uint8_t rhport, bool in_isr); #endif diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index 9d91e52e8..d722bb7e8 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_USBH_PVT_H_ -#define _TUSB_USBH_PVT_H_ +#ifndef TUSB_USBH_PVT_H_ +#define TUSB_USBH_PVT_H_ #include "osal/osal.h" #include "common/tusb_fifo.h" diff --git a/src/osal/osal.h b/src/osal/osal.h index 658b18584..44521620f 100644 --- a/src/osal/osal.h +++ b/src/osal/osal.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_OSAL_H_ -#define _TUSB_OSAL_H_ +#ifndef TUSB_OSAL_H_ +#define TUSB_OSAL_H_ #ifdef __cplusplus extern "C" { @@ -101,4 +101,4 @@ typedef void (*osal_task_func_t)(void* param); } #endif -#endif /* _TUSB_OSAL_H_ */ +#endif diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 6f9b8b0dc..bc86dcb28 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -156,7 +156,7 @@ typedef osal_queue_def_t* osal_queue_t; } TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { - tu_fifo_clear(&qdef->ff); + (void) tu_fifo_clear(&qdef->ff); return (osal_queue_t) qdef; } diff --git a/src/portable/ehci/ehci.h b/src/portable/ehci/ehci.h index 87659701b..719bdeafc 100644 --- a/src/portable/ehci/ehci.h +++ b/src/portable/ehci/ehci.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_EHCI_H_ -#define _TUSB_EHCI_H_ +#ifndef TUSB_EHCI_H_ +#define TUSB_EHCI_H_ /* Abbreviation @@ -458,4 +458,4 @@ TU_VERIFY_STATIC(sizeof(ehci_cap_registers_t) == 16, "size is not correct"); } #endif -#endif /* _TUSB_EHCI_H_ */ +#endif /* TUSB_EHCI_H_ */ diff --git a/src/portable/ehci/ehci_api.h b/src/portable/ehci/ehci_api.h index 12e0a73d7..79fbe702a 100644 --- a/src/portable/ehci/ehci_api.h +++ b/src/portable/ehci/ehci_api.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_EHCI_API_H_ -#define _TUSB_EHCI_API_H_ +#ifndef TUSB_EHCI_API_H_ +#define TUSB_EHCI_API_H_ #ifdef __cplusplus extern "C" { diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.h b/src/portable/nxp/lpc17_40/dcd_lpc17_40.h index 654b80866..25c9f9985 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.h +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_DCD_LPC17_40_H_ -#define _TUSB_DCD_LPC17_40_H_ +#ifndef TUSB_DCD_LPC17_40_H_ +#define TUSB_DCD_LPC17_40_H_ #include "common/tusb_common.h" diff --git a/src/portable/ohci/ohci.h b/src/portable/ohci/ohci.h index 94bad5df7..3366f15f7 100644 --- a/src/portable/ohci/ohci.h +++ b/src/portable/ohci/ohci.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_OHCI_H_ -#define _TUSB_OHCI_H_ +#ifndef TUSB_OHCI_H_ +#define TUSB_OHCI_H_ #ifdef __cplusplus extern "C" { @@ -304,4 +304,4 @@ TU_VERIFY_STATIC( sizeof(ohci_registers_t) == (0x54 + (4 * TUP_OHCI_RHPORTS)), " } #endif -#endif /* _TUSB_OHCI_H_ */ +#endif /* TUSB_OHCI_H_ */ diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index dd88f66a7..71837d03c 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_RUSB2_TYPE_H_ -#define _TUSB_RUSB2_TYPE_H_ +#ifndef TUSB_RUSB2_TYPE_H_ +#define TUSB_RUSB2_TYPE_H_ #include #include @@ -1777,4 +1777,4 @@ TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DPUSR1R_FS ) == 0x0404, "incorrect offset } #endif -#endif /* _TUSB_RUSB2_TYPE_H_ */ +#endif /* TUSB_RUSB2_TYPE_H_ */ diff --git a/src/portable/sunxi/musb_def.h b/src/portable/sunxi/musb_def.h index 53da5ded2..ce9b89d55 100644 --- a/src/portable/sunxi/musb_def.h +++ b/src/portable/sunxi/musb_def.h @@ -26,8 +26,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_MUSB_DEF -#define _TUSB_MUSB_DEF +#ifndef TUSB_MUSB_DEF +#define TUSB_MUSB_DEF #define USBC_Readb(reg) (*(volatile unsigned char *)(reg)) diff --git a/src/portable/synopsys/dwc2/dwc2_bcm.h b/src/portable/synopsys/dwc2/dwc2_bcm.h index e5824606a..df6d4a852 100644 --- a/src/portable/synopsys/dwc2/dwc2_bcm.h +++ b/src/portable/synopsys/dwc2/dwc2_bcm.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_DWC2_BCM_H_ -#define _TUSB_DWC2_BCM_H_ +#ifndef TUSB_DWC2_BCM_H_ +#define TUSB_DWC2_BCM_H_ #ifdef __cplusplus extern "C" { diff --git a/src/portable/valentyusb/eptri/dcd_eptri.h b/src/portable/valentyusb/eptri/dcd_eptri.h index d67635d7c..2fe74a712 100644 --- a/src/portable/valentyusb/eptri/dcd_eptri.h +++ b/src/portable/valentyusb/eptri/dcd_eptri.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_DCD_VALENTYUSB_EPTRI_H_ -#define _TUSB_DCD_VALENTYUSB_EPTRI_H_ +#ifndef TUSB_DCD_VALENTYUSB_EPTRI_H_ +#define TUSB_DCD_VALENTYUSB_EPTRI_H_ #include "common/tusb_common.h" #ifdef __cplusplus @@ -36,4 +36,4 @@ } #endif -#endif /* _TUSB_DCD_VALENTYUSB_EPTRI_H_ */ +#endif /* TUSB_DCD_VALENTYUSB_EPTRI_H_ */ diff --git a/src/tusb.h b/src/tusb.h index 6a469eef4..62b3b9783 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_H_ -#define _TUSB_H_ +#ifndef TUSB_H_ +#define TUSB_H_ #ifdef __cplusplus extern "C" { @@ -178,4 +178,4 @@ bool tusb_deinit(uint8_t rhport); } #endif -#endif /* _TUSB_H_ */ +#endif /* TUSB_H_ */ diff --git a/src/tusb_option.h b/src/tusb_option.h index 14404c59c..e00311039 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_OPTION_H_ -#define _TUSB_OPTION_H_ +#ifndef TUSB_OPTION_H_ +#define TUSB_OPTION_H_ #include "common/tusb_compiler.h" @@ -727,6 +727,6 @@ // To avoid GCC compiler warnings when -pedantic option is used (strict ISO C) typedef int make_iso_compilers_happy; -#endif /* _TUSB_OPTION_H_ */ +#endif /* TUSB_OPTION_H_ */ /** @} */ diff --git a/src/typec/pd_types.h b/src/typec/pd_types.h index 1b2968f65..950f4d488 100644 --- a/src/typec/pd_types.h +++ b/src/typec/pd_types.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_PD_TYPES_H_ -#define _TUSB_PD_TYPES_H_ +#ifndef TUSB_PD_TYPES_H_ +#define TUSB_PD_TYPES_H_ #ifdef __cplusplus extern "C" { diff --git a/src/typec/tcd.h b/src/typec/tcd.h index bcbdab8ed..da7ab4b13 100644 --- a/src/typec/tcd.h +++ b/src/typec/tcd.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_TCD_H_ -#define _TUSB_TCD_H_ +#ifndef TUSB_TCD_H_ +#define TUSB_TCD_H_ #include "common/tusb_common.h" #include "pd_types.h" diff --git a/src/typec/usbc.h b/src/typec/usbc.h index 448542aab..711119596 100644 --- a/src/typec/usbc.h +++ b/src/typec/usbc.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_UTCD_H_ -#define _TUSB_UTCD_H_ +#ifndef TUSB_UTCD_H_ +#define TUSB_UTCD_H_ #include "common/tusb_common.h" #include "pd_types.h" @@ -63,7 +63,7 @@ void tuc_task (void) { tuc_task_ext(UINT32_MAX, false); } -#ifndef _TUSB_TCD_H_ +#ifndef TUSB_TCD_H_ extern void tcd_int_handler(uint8_t rhport); #endif diff --git a/test/fuzz/device/cdc/src/tusb_config.h b/test/fuzz/device/cdc/src/tusb_config.h index 10a8a825a..76f44619e 100644 --- a/test/fuzz/device/cdc/src/tusb_config.h +++ b/test/fuzz/device/cdc/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -111,4 +111,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/test/fuzz/device/cdc/src/usb_descriptors.cc b/test/fuzz/device/cdc/src/usb_descriptors.cc index c26bd18c3..0d7d17b4b 100644 --- a/test/fuzz/device/cdc/src/usb_descriptors.cc +++ b/test/fuzz/device/cdc/src/usb_descriptors.cc @@ -30,10 +30,10 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) << (n)) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) << (n)) #define USB_PID \ - (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(HID, 2) | _PID_MAP(MIDI, 3) | \ - _PID_MAP(VENDOR, 4)) + (0x4000 | PID_MAP(CDC, 0) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | \ + PID_MAP(VENDOR, 4)) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/test/fuzz/device/msc/src/tusb_config.h b/test/fuzz/device/msc/src/tusb_config.h index ca39c6b0a..abd8cd4ce 100644 --- a/test/fuzz/device/msc/src/tusb_config.h +++ b/test/fuzz/device/msc/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -111,4 +111,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/test/fuzz/device/msc/src/usb_descriptors.cc b/test/fuzz/device/msc/src/usb_descriptors.cc index 6d9c4cd96..55c113ad7 100644 --- a/test/fuzz/device/msc/src/usb_descriptors.cc +++ b/test/fuzz/device/msc/src/usb_descriptors.cc @@ -30,10 +30,10 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) << (n)) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) << (n)) #define USB_PID \ - (0x4000 | _PID_MAP(MSC, 0) | _PID_MAP(HID, 1) | _PID_MAP(MIDI, 2) | \ - _PID_MAP(VENDOR, 3)) + (0x4000 | PID_MAP(MSC, 0) | PID_MAP(HID, 1) | PID_MAP(MIDI, 2) | \ + PID_MAP(VENDOR, 3)) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/test/fuzz/device/net/src/tusb_config.h b/test/fuzz/device/net/src/tusb_config.h index 6ad859337..4fe98e043 100644 --- a/test/fuzz/device/net/src/tusb_config.h +++ b/test/fuzz/device/net/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -119,4 +119,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/test/fuzz/device/net/src/usb_descriptors.cc b/test/fuzz/device/net/src/usb_descriptors.cc index e57a791b6..301f23829 100644 --- a/test/fuzz/device/net/src/usb_descriptors.cc +++ b/test/fuzz/device/net/src/usb_descriptors.cc @@ -30,10 +30,10 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | CDC [LSB] */ -#define _PID_MAP(itf, n) ((CFG_TUD_##itf) << (n)) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) << (n)) #define USB_PID \ - (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(HID, 2) | _PID_MAP(MIDI, 3) | \ - _PID_MAP(VENDOR, 4)) + (0x4000 | PID_MAP(CDC, 0) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | \ + PID_MAP(VENDOR, 4)) #define USB_VID 0xCafe #define USB_BCD 0x0200 diff --git a/test/unit-test/test/support/tusb_config.h b/test/unit-test/test/support/tusb_config.h index 00818fae5..dee24f65d 100644 --- a/test/unit-test/test/support/tusb_config.h +++ b/test/unit-test/test/support/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ // testing framework #include "unity.h" @@ -103,4 +103,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ -- cgit v1.3.1 From f35c4216a88247cbc00f63e3caf8f202f96d4b83 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 28 Oct 2025 15:56:25 +0700 Subject: IAR C-Stat exclude mcu folder --- examples/build_system/cmake/toolchain/arm_iar.cmake | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/examples/build_system/cmake/toolchain/arm_iar.cmake b/examples/build_system/cmake/toolchain/arm_iar.cmake index f4c0a500e..0b7e0b585 100644 --- a/examples/build_system/cmake/toolchain/arm_iar.cmake +++ b/examples/build_system/cmake/toolchain/arm_iar.cmake @@ -20,7 +20,12 @@ find_program(CMAKE_IAR_REPORT ireport) if (IAR_CSTAT) cmake_minimum_required(VERSION 4.1) -set(CMAKE_C_ICSTAT ${CMAKE_IAR_CSTAT} --checks=${CMAKE_CURRENT_LIST_DIR}/cstat_sel_checks.txt --db=${CMAKE_BINARY_DIR}/cstat.db --sarif_dir=${CMAKE_BINARY_DIR}/cstat_sarif) +set(CMAKE_C_ICSTAT ${CMAKE_IAR_CSTAT} + --checks=${CMAKE_CURRENT_LIST_DIR}/cstat_sel_checks.txt + --db=${CMAKE_BINARY_DIR}/cstat.db + --sarif_dir=${CMAKE_BINARY_DIR}/cstat_sarif + --exclude ${TOP}/hw/mcu --exclude ${TOP}/lib + ) endif () include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) -- cgit v1.3.1 From 78bd6230649aee3f7731ffbce603742f31c2295e Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 28 Oct 2025 17:56:07 +0700 Subject: filter out sarif for codeql hw/mcu and lib/ --- .github/workflows/static_analysis.yml | 43 ++++++++++++----------------------- 1 file changed, 15 insertions(+), 28 deletions(-) diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 5d2a6c962..7e74f77ce 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -65,36 +65,23 @@ jobs: uses: github/codeql-action/analyze@v4 with: category: CodeQL - upload: always + upload: false id: analyze -# - name: Filter out unwanted errors and warnings -# uses: advanced-security/filter-sarif@v1 -# with: -# patterns: | -# -**:cpp/path-injection -# -**:cpp/world-writable-file-creation -# -**:cpp/poorly-documented-function -# -**:cpp/potentially-dangerous-function -# -**:cpp/use-of-goto -# -**:cpp/integer-multiplication-cast-to-long -# -**:cpp/comparison-with-wider-type -# -**:cpp/leap-year/* -# -**:cpp/ambiguously-signed-bit-field -# -**:cpp/suspicious-pointer-scaling -# -**:cpp/suspicious-pointer-scaling-void -# -**:cpp/unsigned-comparison-zero -# -**/third*party/** -# -**/3rd*party/** -# -**/external/** -# input: ${{ steps.analyze.outputs.sarif-output }}/cpp.sarif -# output: ${{ steps.analyze.outputs.sarif-output }}/cpp.sarif -# -# - name: Upload SARIF -# uses: github/codeql-action/upload-sarif@v4 -# with: -# sarif_file: ${{ steps.analyze.outputs.sarif-output }} -# category: CodeQL + - name: Filter SARIF report + uses: advanced-security/filter-sarif@v1 + with: + patterns: | + -hw/mcu/** + -lib/** + input: ${{ steps.analyze.outputs.sarif-output }}/cpp.sarif + output: ${{ steps.analyze.outputs.sarif-output }}/cpp.sarif + + - name: Upload SARIF + uses: github/codeql-action/upload-sarif@v4 + with: + sarif_file: ${{ steps.analyze.outputs.sarif-output }} + category: CodeQL - name: Upload artifact uses: actions/upload-artifact@v5 -- cgit v1.3.1 From 53c155bf1b2105c8cbfa30b30eaf22a2826d1e0f Mon Sep 17 00:00:00 2001 From: Gabriel Chouinard Date: Wed, 29 Oct 2025 15:31:41 -0400 Subject: Implement tud_audio_set_ep_in_target_fifo_size function to set the target fifo size of the ep in flow control --- src/class/audio/audio_device.c | 24 +++++++++++++++++++----- src/class/audio/audio_device.h | 12 ++++++++++++ 2 files changed, 31 insertions(+), 5 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 7df177773..7b78b39b8 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -223,6 +223,7 @@ typedef struct uint16_t ep_in_sz; // Current size of TX EP uint8_t ep_in_as_intf_num;// Corresponding Standard AS Interface Descriptor (4.9.1) belonging to output terminal to which this EP belongs - 0 is invalid (this fits to UAC2 specification since AS interfaces can not have interface number equal to zero) uint8_t ep_in_alt; // Current alternate setting of TX EP + uint16_t ep_in_target_fifo_size;// Target size for the EP IN FIFO. #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT @@ -469,7 +470,7 @@ static uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t const *p_desc); static bool audiod_calc_tx_packet_sz(audiod_function_t *audio); -static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t max_size); +static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t target_fifo_size, uint16_t max_size); #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -563,6 +564,17 @@ tu_fifo_t *tud_audio_n_get_ep_in_ff(uint8_t func_id) { return NULL; } +uint16_t tud_audio_n_get_ep_in_target_fifo_size(uint8_t func_id) { + if (func_id < CFG_TUD_AUDIO) return _audiod_fct[func_id].ep_in_target_fifo_size; + return 0; +} + +void tud_audio_n_set_ep_in_target_fifo_size(uint8_t func_id, uint16_t target_fifo_size) { + if (func_id < CFG_TUD_AUDIO && target_fifo_size < _audiod_fct[func_id].ep_in_ff.depth) { + _audiod_fct[func_id].ep_in_target_fifo_size = target_fifo_size; + } +} + static bool audiod_tx_xfer_isr(uint8_t rhport, audiod_function_t * audio, uint16_t n_bytes_sent) { uint8_t idx_audio_fct = audiod_get_audio_fct_idx(audio); @@ -574,7 +586,7 @@ static bool audiod_tx_xfer_isr(uint8_t rhport, audiod_function_t * audio, uint16 #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL // packet_sz_tx is based on total packet size, here we want size for each support buffer. - n_bytes_tx = audiod_tx_packet_size(audio->packet_sz_tx, tu_fifo_count(&audio->ep_in_ff), audio->ep_in_ff.depth, audio->ep_in_sz); + n_bytes_tx = audiod_tx_packet_size(audio->packet_sz_tx, tu_fifo_count(&audio->ep_in_ff), audio->ep_in_ff.depth, audio->ep_in_target_fifo_size, audio->ep_in_sz); #else n_bytes_tx = tu_min16(tu_fifo_count(&audio->ep_in_ff), audio->ep_in_sz);// Limit up to max packet size, more can not be done for ISO #endif @@ -1126,6 +1138,8 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p audio->ep_in_as_intf_num = itf; audio->ep_in_alt = alt; audio->ep_in_sz = tu_edpt_packet_size(desc_ep); + // Set the default EP IN target size to half the fifo depth. + audio->ep_in_target_fifo_size = audio->ep_in_ff.depth / 2; // If flow control is enabled, parse for the corresponding parameters - doing this here means only AS interfaces with EPs get scanned for parameters #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL @@ -1786,7 +1800,7 @@ static bool audiod_calc_tx_packet_sz(audiod_function_t *audio) { return true; } -static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t max_depth) { +static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t target_fifo_size, uint16_t max_depth) { // Flow control need a FIFO size of at least 4*Navg if (norminal_size[1] && norminal_size[1] <= fifo_depth * 4) { // Use blackout to prioritize normal size packet @@ -1796,10 +1810,10 @@ static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t da if (data_count < norminal_size[0]) { // If you get here frequently, then your I2S clock deviation is too big ! packet_size = 0; - } else if (data_count < fifo_depth / 2 - slot_size && !ctrl_blackout) { + } else if (data_count < (target_fifo_size - slot_size) - slot_size && !ctrl_blackout) { packet_size = norminal_size[0]; ctrl_blackout = 10; - } else if (data_count > fifo_depth / 2 + slot_size && !ctrl_blackout) { + } else if (data_count > (target_fifo_size - slot_size) + slot_size && !ctrl_blackout) { packet_size = norminal_size[2]; if (norminal_size[0] == norminal_size[1]) { // nav > INT(nav), eg. 44.1k, 88.2k diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index b22a918f4..a501c5a19 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -217,6 +217,8 @@ tu_fifo_t* tud_audio_n_get_ep_out_ff (uint8_t func_id); uint16_t tud_audio_n_write (uint8_t func_id, const void * data, uint16_t len); bool tud_audio_n_clear_ep_in_ff (uint8_t func_id); tu_fifo_t* tud_audio_n_get_ep_in_ff (uint8_t func_id); +uint16_t tud_audio_n_get_ep_in_target_fifo_size(uint8_t func_id); +void tud_audio_n_set_ep_in_target_fifo_size(uint8_t func_id, uint16_t target_fifo_size); #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP @@ -432,6 +434,16 @@ TU_ATTR_ALWAYS_INLINE static inline tu_fifo_t* tud_audio_get_ep_in_ff(void) { return tud_audio_n_get_ep_in_ff(0); } +TU_ATTR_ALWAYS_INLINE static inline uint16_t tud_audio_get_ep_in_target_fifo_size(void) +{ + return tud_audio_n_get_ep_in_target_fifo_size(0); +} + +TU_ATTR_ALWAYS_INLINE static inline void tud_audio_set_ep_in_target_fifo_size(uint16_t target_fifo_size) +{ + tud_audio_n_set_ep_in_target_fifo_size(0, target_fifo_size); +} + #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -- cgit v1.3.1 From ec8ef7a9afbab36271b2aec1624eec35e0b42900 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 30 Oct 2025 11:16:19 +0700 Subject: increase freertos stack size when debug is enabled --- examples/device/cdc_msc_freertos/src/main.c | 2 +- examples/device/hid_composite_freertos/src/main.c | 2 +- examples/device/midi_test_freertos/src/main.c | 2 +- examples/host/cdc_msc_hid_freertos/src/main.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index be8482f1c..4fb209fd0 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -37,7 +37,7 @@ #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif -#define CDC_STACK_SIZE 2*configMINIMAL_STACK_SIZE +#define CDC_STACK_SIZE (configMINIMAL_STACK_SIZE * (CFG_TUSB_DEBUG ? 2 : 1)) #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE //--------------------------------------------------------------------+ diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index acc8f69a0..391e3c42a 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -53,7 +53,7 @@ #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif -#define HID_STACK_SZIE 2*configMINIMAL_STACK_SIZE +#define HID_STACK_SZIE (configMINIMAL_STACK_SIZE * (CFG_TUSB_DEBUG ? 2 : 1)) //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES diff --git a/examples/device/midi_test_freertos/src/main.c b/examples/device/midi_test_freertos/src/main.c index 070906d0d..f5267214e 100644 --- a/examples/device/midi_test_freertos/src/main.c +++ b/examples/device/midi_test_freertos/src/main.c @@ -48,7 +48,7 @@ #endif #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE -#define MIDI_STACK_SIZE 2*configMINIMAL_STACK_SIZE +#define MIDI_STACK_SIZE (configMINIMAL_STACK_SIZE * (CFG_TUSB_DEBUG ? 2 : 1)) // static task #if configSUPPORT_STATIC_ALLOCATION diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 4a9031278..483f2344e 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -34,7 +34,7 @@ #define USBH_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled - #define USBH_STACK_SIZE (4*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) + #define USBH_STACK_SIZE (configMINIMAL_STACK_SIZE * (CFG_TUSB_DEBUG ? 4 : 2)) #endif -- cgit v1.3.1 From 3f1f7140c4ad1991c8c1bf73a0864414da68a40d Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 30 Oct 2025 14:52:09 +0700 Subject: update lpc55 family.c --- hw/bsp/lpc55/family.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 503e16216..f1ef58926 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -214,7 +214,7 @@ void board_init(void) { RESET_PeripheralReset(kUSB0HSL_RST_SHIFT_RSTn); RESET_PeripheralReset(kUSB0HMR_RST_SHIFT_RSTn); - if (BOARD_TUD_RHPORT == 0) { + if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0) { // Enable USB Clock Adjustments to trim the FRO for the full speed controller ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); -- cgit v1.3.1 From 032de0b0df92162aa579eda986145e3756a29a6c Mon Sep 17 00:00:00 2001 From: Tobi Date: Thu, 30 Oct 2025 12:21:21 +0100 Subject: Video Class: New callback function added which allows to generate frame data on the fly - If buffer is set to NULL, the callback will request payload data from a user function. This allows to work with dynamic content on platforms which are not able to hold a whole frame in memory. - Callback uses the same "weak" linking as other callbacks for this class. --- src/class/video/video_device.c | 18 +++++++++++++++--- src/class/video/video_device.h | 10 ++++++++++ 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 5c00cc358..00f192af6 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -214,6 +214,14 @@ TU_ATTR_WEAK int tud_video_commit_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, return VIDEO_ERROR_NONE; } +TU_ATTR_WEAK void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void* payload_buf, size_t payload_size, size_t offset) { + (void) ctl_idx; + (void) stm_idx; + (void) payload_buf; + (void) payload_size; + (void) offset; +} + //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ @@ -860,7 +868,11 @@ static uint_fast16_t _prepare_in_payload(videod_streaming_interface_t *stm, uint } TU_ASSERT(pkt_len >= hdr_len); uint_fast16_t data_len = pkt_len - hdr_len; - memcpy(&ep_buf[hdr_len], stm->buffer + stm->offset, data_len); + if (stm->buffer) { + memcpy(&ep_buf[hdr_len], stm->buffer + stm->offset, data_len); + } else { + tud_video_prepare_payload_cb(stm->index_vc, stm->index_vs, &ep_buf[hdr_len], data_len, stm->offset); + } stm->offset += data_len; remaining -= data_len; if (!remaining) { @@ -1235,11 +1247,11 @@ bool tud_video_n_frame_xfer(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void *bu TU_ASSERT(ctl_idx < CFG_TUD_VIDEO); TU_ASSERT(stm_idx < CFG_TUD_VIDEO_STREAMING); - if (!buffer || !bufsize) return false; + if (!bufsize) return false; videod_streaming_interface_t *stm = _get_instance_streaming(ctl_idx, stm_idx); videod_streaming_epbuf_t *stm_epbuf = &_videod_streaming_epbuf[ctl_idx]; - if (!stm || !stm->desc.ep[0] || stm->buffer) return false; + if (!stm || !stm->desc.ep[0] || stm->bufsize) return false; if (stm->state == VS_STATE_PROBING) return false; /* Find EP address */ diff --git a/src/class/video/video_device.h b/src/class/video/video_device.h index 2b41c3bfe..b3094dd81 100644 --- a/src/class/video/video_device.h +++ b/src/class/video/video_device.h @@ -83,6 +83,16 @@ int tud_video_power_mode_cb(uint_fast8_t ctl_idx, uint8_t power_mod); int tud_video_commit_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, video_probe_and_commit_control_t const *parameters); +/** Invoked if buffer is set to NULL (allows bufferless on the fly data generation) + * + * @param[in] ctl_idx Destination control interface index + * @param[in] stm_idx Destination streaming interface index + * @param[out] payload_buf Payload storage buffer (target buffer for requested data) + * @param[in] payload_size Size of payload_buf (requested data size) + * @param[in] offset Current byte offset relative to given bufsize from tud_video_n_frame_xfer (framesize) + * @return video_error_code_t */ +void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void* payload_buf, size_t payload_size, size_t offset); + //--------------------------------------------------------------------+ // INTERNAL USBD-CLASS DRIVER API //--------------------------------------------------------------------+ -- cgit v1.3.1 From b8cea4ad766ea40de88fdaa28c19e69f5bc25f9d Mon Sep 17 00:00:00 2001 From: Tobi Date: Thu, 30 Oct 2025 14:06:17 +0100 Subject: Added bufferless operation to the video capture example. Can be tested with e.g. nanoCH32V305 board with the following settings: - tusb_config.h - #define CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE 1024 - #define CFG_TUD_VIDEO_STREAMING_BULK 1 - #define CFG_EXAMPLE_VIDEO_DISABLE_MJPEG - #define CFG_EXAMPLE_VIDEO_BUFFERLESS and - usb_descriptor.h - #define FRAME_RATE 60 --- examples/device/video_capture/src/main.c | 69 +++++++++++++++++++------ examples/device/video_capture/src/tusb_config.h | 1 + 2 files changed, 55 insertions(+), 15 deletions(-) diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 29656e944..b01830dfe 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -56,6 +56,20 @@ void video_task(void* param); void freertos_init_task(void); #endif +#if !defined(CFG_EXAMPLE_VIDEO_READONLY) || defined(CFG_EXAMPLE_VIDEO_BUFFERLESS) +/* EBU color bars: https://stackoverflow.com/questions/6939422 */ +static uint8_t const bar_color[8][4] = { + /* Y, U, Y, V */ + { 235, 128, 235, 128}, /* 100% White */ + { 219, 16, 219, 138}, /* Yellow */ + { 188, 154, 188, 16}, /* Cyan */ + { 173, 42, 173, 26}, /* Green */ + { 78, 214, 78, 230}, /* Magenta */ + { 63, 102, 63, 240}, /* Red */ + { 32, 240, 32, 118}, /* Blue */ + { 16, 128, 16, 128}, /* Black */ +}; +#endif //--------------------------------------------------------------------+ // Main @@ -111,12 +125,43 @@ void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } +#ifdef CFG_EXAMPLE_VIDEO_BUFFERLESS + +#ifndef CFG_EXAMPLE_VIDEO_DISABLE_MJPEG + #error Demo only supports YUV2 please define CFG_EXAMPLE_VIDEO_DISABLE_MJPEG +#endif + +void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void* payload_buf, size_t payload_size, size_t offset) +{ + static uint32_t frame_counter = 0; + (void)ctl_idx; + (void)stm_idx; + + /* Offset will be zero at the start of a new frame */ + if (!offset) frame_counter++; + + for (size_t buf_pos = 0; buf_pos < payload_size; buf_pos += 2) { + + /* Position within the current line (pixel relative) */ + int line_pos = ((offset + buf_pos)>>1) % FRAME_WIDTH; + + /* Choose color based on the position and change the table offset every 4 frames */ + const uint8_t* color = bar_color[(line_pos/(FRAME_WIDTH / 8) + (frame_counter>>2)) % 8]; + + /* Copy pixel data for odd or even pixels */ + memcpy(&((uint8_t*)payload_buf)[buf_pos], &color[(line_pos & 1) ? 2 : 0], 2); + } + +} +#endif + //--------------------------------------------------------------------+ // USB Video //--------------------------------------------------------------------+ static unsigned frame_num = 0; static unsigned tx_busy = 0; static unsigned interval_ms = 1000 / FRAME_RATE; +#ifndef CFG_EXAMPLE_VIDEO_BUFFERLESS #ifdef CFG_EXAMPLE_VIDEO_READONLY // For mcus that does not have enough SRAM for frame buffer, we use fixed frame data. @@ -145,18 +190,6 @@ static struct { static uint8_t frame_buffer[FRAME_WIDTH * FRAME_HEIGHT * 16 / 8]; static void fill_color_bar(uint8_t* buffer, unsigned start_position) { - /* EBU color bars: https://stackoverflow.com/questions/6939422 */ - static uint8_t const bar_color[8][4] = { - /* Y, U, Y, V */ - { 235, 128, 235, 128}, /* 100% White */ - { 219, 16, 219, 138}, /* Yellow */ - { 188, 154, 188, 16}, /* Cyan */ - { 173, 42, 173, 26}, /* Green */ - { 78, 214, 78, 230}, /* Magenta */ - { 63, 102, 63, 240}, /* Red */ - { 32, 240, 32, 118}, /* Blue */ - { 16, 128, 16, 128}, /* Black */ - }; uint8_t* p; /* Generate the 1st line */ @@ -183,6 +216,8 @@ static void fill_color_bar(uint8_t* buffer, unsigned start_position) { #endif +#endif /* NDEF CFG_EXAMPLE_VIDEO_BUFFERLESS */ + static void video_send_frame(void) { static unsigned start_ms = 0; static unsigned already_sent = 0; @@ -197,7 +232,9 @@ static void video_send_frame(void) { already_sent = 1; tx_busy = 1; start_ms = board_millis(); -#ifdef CFG_EXAMPLE_VIDEO_READONLY +#if defined(CFG_EXAMPLE_VIDEO_BUFFERLESS) + tud_video_n_frame_xfer(0, 0, NULL, FRAME_WIDTH * FRAME_HEIGHT * 16 / 8); +#elif defined (CFG_EXAMPLE_VIDEO_READONLY) #if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG) tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], FRAME_WIDTH * FRAME_HEIGHT * 16/8); @@ -216,13 +253,15 @@ static void video_send_frame(void) { start_ms += interval_ms; tx_busy = 1; -#ifdef CFG_EXAMPLE_VIDEO_READONLY +#if defined(CFG_EXAMPLE_VIDEO_BUFFERLESS) + tud_video_n_frame_xfer(0, 0, NULL, FRAME_WIDTH * FRAME_HEIGHT * 16 / 8); +#elif defined(CFG_EXAMPLE_VIDEO_READONLY) #if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG) tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], FRAME_WIDTH * FRAME_HEIGHT * 16/8); #else tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size); - #endif + #endif #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*) frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16 / 8); diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 390152e16..1aa1a5ce7 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -110,6 +110,7 @@ //#define CFG_EXAMPLE_VIDEO_READONLY //#define CFG_EXAMPLE_VIDEO_DISABLE_MJPEG +//#define CFG_EXAMPLE_VIDEO_BUFFERLESS #ifdef __cplusplus } -- cgit v1.3.1 From 889cde7d4b31b30f34abc6e304445403bdf4ced4 Mon Sep 17 00:00:00 2001 From: Tobi Date: Thu, 30 Oct 2025 15:01:52 +0100 Subject: Video class: Changed pararameters of payload request to a dedicated structure in order to meet coding guideliness --- examples/device/video_capture/src/main.c | 10 +++++----- src/class/video/video_device.c | 13 ++++++++----- src/class/video/video_device.h | 12 +++++++++++- 3 files changed, 24 insertions(+), 11 deletions(-) diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index b01830dfe..77ffd7bef 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -131,25 +131,25 @@ void tud_resume_cb(void) { #error Demo only supports YUV2 please define CFG_EXAMPLE_VIDEO_DISABLE_MJPEG #endif -void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void* payload_buf, size_t payload_size, size_t offset) +void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, tud_video_payload_request_t* request) { static uint32_t frame_counter = 0; (void)ctl_idx; (void)stm_idx; /* Offset will be zero at the start of a new frame */ - if (!offset) frame_counter++; + if (!request->offset) frame_counter++; - for (size_t buf_pos = 0; buf_pos < payload_size; buf_pos += 2) { + for (size_t buf_pos = 0; buf_pos < request->length; buf_pos += 2) { /* Position within the current line (pixel relative) */ - int line_pos = ((offset + buf_pos)>>1) % FRAME_WIDTH; + int line_pos = ((request->offset + buf_pos)>>1) % FRAME_WIDTH; /* Choose color based on the position and change the table offset every 4 frames */ const uint8_t* color = bar_color[(line_pos/(FRAME_WIDTH / 8) + (frame_counter>>2)) % 8]; /* Copy pixel data for odd or even pixels */ - memcpy(&((uint8_t*)payload_buf)[buf_pos], &color[(line_pos & 1) ? 2 : 0], 2); + memcpy(&((uint8_t*)request->buf)[buf_pos], &color[(line_pos & 1) ? 2 : 0], 2); } } diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 00f192af6..326f5c13d 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -214,12 +214,10 @@ TU_ATTR_WEAK int tud_video_commit_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, return VIDEO_ERROR_NONE; } -TU_ATTR_WEAK void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void* payload_buf, size_t payload_size, size_t offset) { +TU_ATTR_WEAK void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, tud_video_payload_request_t* request) { (void) ctl_idx; (void) stm_idx; - (void) payload_buf; - (void) payload_size; - (void) offset; + (void) request; } //--------------------------------------------------------------------+ @@ -871,7 +869,12 @@ static uint_fast16_t _prepare_in_payload(videod_streaming_interface_t *stm, uint if (stm->buffer) { memcpy(&ep_buf[hdr_len], stm->buffer + stm->offset, data_len); } else { - tud_video_prepare_payload_cb(stm->index_vc, stm->index_vs, &ep_buf[hdr_len], data_len, stm->offset); + tud_video_payload_request_t rqst = { + .buf = &ep_buf[hdr_len], + .length = data_len, + .offset = stm->offset + }; + tud_video_prepare_payload_cb(stm->index_vc, stm->index_vs, &rqst); } stm->offset += data_len; remaining -= data_len; diff --git a/src/class/video/video_device.h b/src/class/video/video_device.h index b3094dd81..f14555e4f 100644 --- a/src/class/video/video_device.h +++ b/src/class/video/video_device.h @@ -35,6 +35,16 @@ extern "C" { #endif + +//--------------------------------------------------------------------+ +// Payload request +//--------------------------------------------------------------------+ +typedef struct TU_ATTR_PACKED { + void* buf; /* Payload buffer to be filled */ + size_t length; /* Length of the requested data in bytes */ + size_t offset; /* Offset within the frame (in bytes) */ +} tud_video_payload_request_t; + //--------------------------------------------------------------------+ // Application API (Multiple Ports) // CFG_TUD_VIDEO > 1 @@ -91,7 +101,7 @@ int tud_video_commit_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, * @param[in] payload_size Size of payload_buf (requested data size) * @param[in] offset Current byte offset relative to given bufsize from tud_video_n_frame_xfer (framesize) * @return video_error_code_t */ -void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void* payload_buf, size_t payload_size, size_t offset); +void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, tud_video_payload_request_t* request); //--------------------------------------------------------------------+ // INTERNAL USBD-CLASS DRIVER API -- cgit v1.3.1 From 6b3970d5ff7547778ed5e1fc295dcfd1fbcad7e8 Mon Sep 17 00:00:00 2001 From: Tobi Date: Fri, 31 Oct 2025 17:29:58 +0100 Subject: Fixed trailing whitespaces in files (used wrong editor) --- examples/device/video_capture/src/main.c | 14 +++++++------- src/class/video/video_device.c | 6 +++--- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 77ffd7bef..ede8e3e4c 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -138,15 +138,15 @@ void tud_video_prepare_payload_cb(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, tu (void)stm_idx; /* Offset will be zero at the start of a new frame */ - if (!request->offset) frame_counter++; + if (!request->offset) frame_counter++; for (size_t buf_pos = 0; buf_pos < request->length; buf_pos += 2) { /* Position within the current line (pixel relative) */ - int line_pos = ((request->offset + buf_pos)>>1) % FRAME_WIDTH; - + int line_pos = ((request->offset + buf_pos)>>1) % FRAME_WIDTH; + /* Choose color based on the position and change the table offset every 4 frames */ - const uint8_t* color = bar_color[(line_pos/(FRAME_WIDTH / 8) + (frame_counter>>2)) % 8]; + const uint8_t* color = bar_color[(line_pos/(FRAME_WIDTH / 8) + (frame_counter>>2)) % 8]; /* Copy pixel data for odd or even pixels */ memcpy(&((uint8_t*)request->buf)[buf_pos], &color[(line_pos & 1) ? 2 : 0], 2); @@ -233,7 +233,7 @@ static void video_send_frame(void) { tx_busy = 1; start_ms = board_millis(); #if defined(CFG_EXAMPLE_VIDEO_BUFFERLESS) - tud_video_n_frame_xfer(0, 0, NULL, FRAME_WIDTH * FRAME_HEIGHT * 16 / 8); + tud_video_n_frame_xfer(0, 0, NULL, FRAME_WIDTH * FRAME_HEIGHT * 16 / 8); #elif defined (CFG_EXAMPLE_VIDEO_READONLY) #if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG) tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], @@ -254,14 +254,14 @@ static void video_send_frame(void) { tx_busy = 1; #if defined(CFG_EXAMPLE_VIDEO_BUFFERLESS) - tud_video_n_frame_xfer(0, 0, NULL, FRAME_WIDTH * FRAME_HEIGHT * 16 / 8); + tud_video_n_frame_xfer(0, 0, NULL, FRAME_WIDTH * FRAME_HEIGHT * 16 / 8); #elif defined(CFG_EXAMPLE_VIDEO_READONLY) #if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG) tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], FRAME_WIDTH * FRAME_HEIGHT * 16/8); #else tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size); - #endif + #endif #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*) frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16 / 8); diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 326f5c13d..adf8ab821 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -870,9 +870,9 @@ static uint_fast16_t _prepare_in_payload(videod_streaming_interface_t *stm, uint memcpy(&ep_buf[hdr_len], stm->buffer + stm->offset, data_len); } else { tud_video_payload_request_t rqst = { - .buf = &ep_buf[hdr_len], - .length = data_len, - .offset = stm->offset + .buf = &ep_buf[hdr_len], + .length = data_len, + .offset = stm->offset }; tud_video_prepare_payload_cb(stm->index_vc, stm->index_vs, &rqst); } -- cgit v1.3.1 From 9d46cca57637cfd086499970a8f5d5669ba9bfa0 Mon Sep 17 00:00:00 2001 From: tswan22 Date: Sat, 1 Nov 2025 12:51:31 -0400 Subject: add STM32U3 device (adjusted from STM32U0) --- README.rst | 2 ++ src/common/tusb_mcu.h | 5 +++++ src/portable/st/stm32_fsdev/fsdev_stm32.h | 28 ++++++++++++++++++++++++++++ src/tusb_option.h | 1 + 4 files changed, 36 insertions(+) diff --git a/README.rst b/README.rst index 3ea1bd018..23e427ec9 100644 --- a/README.rst +++ b/README.rst @@ -212,6 +212,8 @@ Supported CPUs | +----+------------------------+--------+------+-----------+------------------------+-------------------+ | | U0 | ✔ | ✖ | ✖ | stm32_fsdev | | | +----+------------------------+--------+------+-----------+------------------------+-------------------+ +| | U3 | ✔ | | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+------------------------+-------------------+ | | U5 | 535, 545 | ✔ | | ✖ | stm32_fsdev | | | | +------------------------+--------+------+-----------+------------------------+-------------------+ | | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 0b8ed1059..6941e1a31 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -337,6 +337,11 @@ #define TUP_USBIP_FSDEV_STM32 #define TUP_DCD_ENDPOINT_MAX 8 +#elif TU_CHECK_MCU(OPT_MCU_STM32U3) + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define TUP_DCD_ENDPOINT_MAX 8 + #elif TU_CHECK_MCU(OPT_MCU_STM32H7RS, OPT_MCU_STM32N6) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index 63b50f13d..30ffadc35 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -225,6 +225,32 @@ #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY #define USB_CNTR_FSUSP USB_CNTR_SUSPEN +#elif CFG_TUSB_MCU == OPT_MCU_STM32U3 + #include "stm32u3xx.h" + #define FSDEV_PMA_SIZE (2048u) + #define FSDEV_BUS_32BIT + #define FSDEV_HAS_SBUF_ISO 1 // This is assumed to work but has not been tested... + #define USB USB_DRD_FS + + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EPREG_MASK USB_CHEP_REG_MASK + #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK + #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK + #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 + #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 + #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 + #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 + #define USB_EPRX_STAT USB_CH_RX_VALID + #define USB_EPKIND_MASK USB_EP_KIND_MASK + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + #else #error You are using an untested or unimplemented STM32 variant. Please update the driver. // This includes U0 @@ -338,6 +364,8 @@ static const IRQn_Type fsdev_irq[] = { USB_IRQn, #elif CFG_TUSB_MCU == OPT_MCU_STM32U0 USB_DRD_FS_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32U3 + USB_FS_IRQn, #else #error Unknown arch in USB driver #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index 14404c59c..b78fbca30 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -98,6 +98,7 @@ #define OPT_MCU_STM32C0 318 ///< ST C0 #define OPT_MCU_STM32N6 319 ///< ST N6 #define OPT_MCU_STM32WBA 320 ///< ST WBA +#define OPT_MCU_STM32U3 321 ///< ST U3 // Sony #define OPT_MCU_CXD56 400 ///< SONY CXD56 -- cgit v1.3.1 From bda7efb1b3d482b7add2535a4a72f51a0dea5c08 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 3 Nov 2025 10:46:09 +0700 Subject: fix #2942, include stdio if CFG_TUSB_DEBUG > 0 and CFG_TUSB_DEBUG_PRINTF is not defined --- examples/host/cdc_msc_hid/src/app.h | 2 ++ examples/host/cdc_msc_hid/src/hid_app.c | 1 - examples/host/cdc_msc_hid/src/msc_app.c | 1 + examples/host/cdc_msc_hid_freertos/src/app.h | 2 ++ examples/host/cdc_msc_hid_freertos/src/msc_app.c | 2 ++ examples/host/hid_controller/src/app.h | 2 ++ examples/host/msc_file_explorer/src/main.c | 1 - examples/host/msc_file_explorer/src/msc_app.h | 1 + src/class/net/ncm_device.c | 4 ---- src/common/tusb_common.h | 9 +++++---- src/common/tusb_debug.h | 1 + src/common/tusb_types.h | 6 +++--- src/common/tusb_verify.h | 4 +--- 13 files changed, 20 insertions(+), 16 deletions(-) diff --git a/examples/host/cdc_msc_hid/src/app.h b/examples/host/cdc_msc_hid/src/app.h index bf15c7bea..49783b4ae 100644 --- a/examples/host/cdc_msc_hid/src/app.h +++ b/examples/host/cdc_msc_hid/src/app.h @@ -26,6 +26,8 @@ #ifndef TUSB_TINYUSB_EXAMPLES_APP_H #define TUSB_TINYUSB_EXAMPLES_APP_H +#include + void cdc_app_task(void); void hid_app_task(void); diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index f6a83aeed..eb20356cb 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -22,7 +22,6 @@ * THE SOFTWARE. * */ - #include "bsp/board_api.h" #include "tusb.h" #include "app.h" diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index 0e9c99766..dd4e22d7f 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -23,6 +23,7 @@ * */ +#include #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/cdc_msc_hid_freertos/src/app.h b/examples/host/cdc_msc_hid_freertos/src/app.h index 960f7e8cc..8892a1b6b 100644 --- a/examples/host/cdc_msc_hid_freertos/src/app.h +++ b/examples/host/cdc_msc_hid_freertos/src/app.h @@ -26,6 +26,8 @@ #ifndef TUSB_TINYUSB_EXAMPLES_APP_H #define TUSB_TINYUSB_EXAMPLES_APP_H +#include + void cdc_app_init(void); void hid_app_init(void); void msc_app_init(void); diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c index a6e3ed4ee..fa864c364 100644 --- a/examples/host/cdc_msc_hid_freertos/src/msc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -23,6 +23,8 @@ * */ +#include + #include "tusb.h" #include "app.h" diff --git a/examples/host/hid_controller/src/app.h b/examples/host/hid_controller/src/app.h index 1f9015cd2..b4d072668 100644 --- a/examples/host/hid_controller/src/app.h +++ b/examples/host/hid_controller/src/app.h @@ -26,6 +26,8 @@ #ifndef TUSB_TINYUSB_EXAMPLES_APP_H #define TUSB_TINYUSB_EXAMPLES_APP_H +#include + void hid_app_task(void); #endif diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 506c3b015..f9ec0ff5f 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -56,7 +56,6 @@ */ #include -#include #include #include "bsp/board_api.h" diff --git a/examples/host/msc_file_explorer/src/msc_app.h b/examples/host/msc_file_explorer/src/msc_app.h index 3ba03d0dc..a99da5b5c 100644 --- a/examples/host/msc_file_explorer/src/msc_app.h +++ b/examples/host/msc_file_explorer/src/msc_app.h @@ -27,6 +27,7 @@ #define MSC_APP_H #include +#include bool msc_app_init(void); void msc_app_task(void); diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 02833c5f1..ea3c250fe 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -50,10 +50,6 @@ #if (CFG_TUD_ENABLED && CFG_TUD_NCM) -#include -#include -#include - #include "device/usbd.h" #include "device/usbd_pvt.h" diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 6aa7e0bfc..6d7adc3a1 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -77,7 +77,6 @@ #include #include #include -#include // Tinyusb Common Headers #include "tusb_option.h" @@ -126,7 +125,7 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, i return -1; } - memset(dest, ch, count); + (void) memset(dest, ch, count); return 0; } @@ -146,7 +145,7 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, c return -1; } - memcpy(dest, src, count); + (void) memcpy(dest, src, count); return 0; } @@ -231,7 +230,9 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_round_up(uint32_t v, uint32_t f) // TODO use clz TODO remove TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_log2(uint32_t value) { uint8_t result = 0; - while (value >>= 1) { result++; } + while ((value >>= 1) != 0) { + result++; + } return result; } diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index e3f9d3f18..df4034098 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -55,6 +55,7 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); extern int CFG_TUSB_DEBUG_PRINTF(const char *format, ...); #define tu_printf CFG_TUSB_DEBUG_PRINTF #else + #include #define tu_printf printf #endif diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 55f309af8..4f2b66e6a 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -252,8 +252,8 @@ typedef enum { } device_capability_type_t; enum { - TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP = 1u << 5, - TUSB_DESC_CONFIG_ATT_SELF_POWERED = 1u << 6, + TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP = 1 << 5, + TUSB_DESC_CONFIG_ATT_SELF_POWERED = 1 << 6, }; #define TUSB_DESC_CONFIG_POWER_MA(x) ((x)/2) @@ -311,7 +311,7 @@ enum { }; enum { - TUSB_INDEX_INVALID_8 = 0xFFu + TUSB_INDEX_INVALID_8 = 0xFF }; //--------------------------------------------------------------------+ diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index db91a73d9..9dc73aa60 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -67,10 +67,8 @@ //--------------------------------------------------------------------+ // TU_VERIFY Helper //--------------------------------------------------------------------+ - #if CFG_TUSB_DEBUG - #include - #define TU_MESS_FAILED() tu_printf("%s %d: ASSERT FAILED\r\n", __func__, __LINE__) + #define TU_MESS_FAILED() TU_LOG1("%s %d: ASSERT FAILED\r\n", __func__, __LINE__) #else #define TU_MESS_FAILED() do {} while (0) #endif -- cgit v1.3.1 From 8e9ba218157eb1777872319ce3031ba5be6d7ccc Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 3 Nov 2025 10:46:53 +0700 Subject: fix alert using input in gh action. fix some conversion int --- .github/workflows/build_util.yml | 3 ++- src/class/audio/audio.h | 10 +++++----- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index a2c96f3c0..55901b838 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -60,8 +60,9 @@ jobs: - name: Build env: IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} + TOOLCHAIN: ${{ inputs.toolchain }} run: | - if [ "${{ inputs.toolchain }}" == "esp-idf" ]; then + if [ "$TOOLCHAIN" == "esp-idf" ]; then docker run --rm -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py ${{ matrix.arg }} else python tools/build.py -s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ steps.set-one-per-family.outputs.build_option }} ${{ matrix.arg }} diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index 47d25dd81..bcfb67640 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -867,11 +867,11 @@ typedef enum { // A.2.1 - Audio Class-Audio Data Format Type I UAC2 typedef enum { - AUDIO20_DATA_FORMAT_TYPE_I_PCM = (uint32_t) (1 << 0), - AUDIO20_DATA_FORMAT_TYPE_I_PCM8 = (uint32_t) (1 << 1), - AUDIO20_DATA_FORMAT_TYPE_I_IEEE_FLOAT = (uint32_t) (1 << 2), - AUDIO20_DATA_FORMAT_TYPE_I_ALAW = (uint32_t) (1 << 3), - AUDIO20_DATA_FORMAT_TYPE_I_MULAW = (uint32_t) (1 << 4), + AUDIO20_DATA_FORMAT_TYPE_I_PCM = 1 << 0, + AUDIO20_DATA_FORMAT_TYPE_I_PCM8 = 1 << 1, + AUDIO20_DATA_FORMAT_TYPE_I_IEEE_FLOAT = 1 << 2, + AUDIO20_DATA_FORMAT_TYPE_I_ALAW = 1 << 3, + AUDIO20_DATA_FORMAT_TYPE_I_MULAW = 1 << 4, AUDIO20_DATA_FORMAT_TYPE_I_RAW_DATA = 0x80000000u, } audio20_data_format_type_I_t; -- cgit v1.3.1 From 67b2a5c2e1dacd305015ae4a6329c8db8f198e81 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 3 Nov 2025 11:17:39 +0700 Subject: remove binary prefix for portability --- src/common/tusb_common.h | 42 ++++-------------------------------------- src/portable/ehci/ehci.c | 6 +++--- src/portable/ohci/ohci.c | 2 +- 3 files changed, 8 insertions(+), 42 deletions(-) diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 6d7adc3a1..ac1c6457f 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -278,14 +278,12 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write16(void *mem, uint16_ // We have to manually pick up bytes since tu_unaligned_uint32_t will still generate unaligned code // NOTE: volatile cast to memory to prevent compiler to optimize and generate unaligned code // TODO Big Endian may need minor changes -TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_unaligned_read32(const void* mem) -{ +TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_unaligned_read32(const void* mem) { volatile uint8_t const* buf8 = (uint8_t const*) mem; return tu_u32(buf8[3], buf8[2], buf8[1], buf8[0]); } -TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write32(void* mem, uint32_t value) -{ +TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write32(void* mem, uint32_t value) { volatile uint8_t* buf8 = (uint8_t*) mem; buf8[0] = tu_u32_byte0(value); buf8[1] = tu_u32_byte1(value); @@ -293,20 +291,17 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write32(void* mem, uint32_ buf8[3] = tu_u32_byte3(value); } -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_unaligned_read16(const void* mem) -{ +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_unaligned_read16(const void* mem) { volatile uint8_t const* buf8 = (uint8_t const*) mem; return tu_u16(buf8[1], buf8[0]); } -TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write16(void* mem, uint16_t value) -{ +TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write16(void* mem, uint16_t value) { volatile uint8_t* buf8 = (uint8_t*) mem; buf8[0] = tu_u16_low(value); buf8[1] = tu_u16_high(value); } - #else // MCU that could access unaligned memory natively @@ -328,35 +323,6 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write16(void *mem, uint16_ #endif -// To be removed -//------------- Binary constant -------------// -#if defined(__GNUC__) && !defined(__CC_ARM) - -#define TU_BIN8(x) ((uint8_t) (0b##x)) -#define TU_BIN16(b1, b2) ((uint16_t) (0b##b1##b2)) -#define TU_BIN32(b1, b2, b3, b4) ((uint32_t) (0b##b1##b2##b3##b4)) - -#else - -// internal macro of B8, B16, B32 -#define _B8__(x) (((x&0x0000000FUL)?1:0) \ - +((x&0x000000F0UL)?2:0) \ - +((x&0x00000F00UL)?4:0) \ - +((x&0x0000F000UL)?8:0) \ - +((x&0x000F0000UL)?16:0) \ - +((x&0x00F00000UL)?32:0) \ - +((x&0x0F000000UL)?64:0) \ - +((x&0xF0000000UL)?128:0)) - -#define TU_BIN8(d) ((uint8_t) _B8__(0x##d##UL)) -#define TU_BIN16(dmsb,dlsb) (((uint16_t)TU_BIN8(dmsb)<<8) + TU_BIN8(dlsb)) -#define TU_BIN32(dmsb,db2,db3,dlsb) \ - (((uint32_t)TU_BIN8(dmsb)<<24) \ - + ((uint32_t)TU_BIN8(db2)<<16) \ - + ((uint32_t)TU_BIN8(db3)<<8) \ - + TU_BIN8(dlsb)) -#endif - //--------------------------------------------------------------------+ // Descriptor helper //--------------------------------------------------------------------+ diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 953483583..973bb43cc 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -919,8 +919,8 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c if (interval < 4) { // sub millisecond interval p_qhd->interval_ms = 0; - p_qhd->int_smask = (interval == 1) ? TU_BIN8(11111111) : - (interval == 2) ? TU_BIN8(10101010): TU_BIN8(01000100); + p_qhd->int_smask = (interval == 1) ? 0xff : // 0b11111111 + (interval == 2) ? 0xaa /* 0b10101010 */ : 0x44 /* 01000100 */; } else { p_qhd->interval_ms = (uint8_t) tu_min16(1 << (interval - 4), 255); p_qhd->int_smask = TU_BIT(interval % 8); @@ -929,7 +929,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c TU_ASSERT(0 != interval, ); // Full/Low: 4.12.2.1 (EHCI) case 1 schedule start split at 1 us & complete split at 2,3,4 uframes p_qhd->int_smask = 0x01; - p_qhd->fl_int_cmask = TU_BIN8(11100); + p_qhd->fl_int_cmask = 0x1c; // 0b11100 p_qhd->interval_ms = interval; } break; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 6d4594450..f6ee7e764 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -127,7 +127,7 @@ enum { enum { OHCI_INT_ON_COMPLETE_YES = 0, - OHCI_INT_ON_COMPLETE_NO = TU_BIN8(111) + OHCI_INT_ON_COMPLETE_NO = 0x7 // 0b111 }; enum { -- cgit v1.3.1 From 00f374682ea5aaecf189e46966f015576049a773 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 3 Nov 2025 11:43:19 +0700 Subject: fixing alert by scanning tool --- .../audio_4_channel_mic/src/usb_descriptors.c | 12 ++++-- examples/device/cdc_msc/src/main.c | 2 +- hw/bsp/board_api.h | 3 +- src/class/audio/audio.h | 2 +- src/common/tusb_compiler.h | 48 +++++++++++----------- src/common/tusb_types.h | 4 +- src/osal/osal_freertos.h | 14 +++---- src/tusb_option.h | 6 +-- 8 files changed, 48 insertions(+), 43 deletions(-) diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 2f5f67f66..00337eee7 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -126,7 +126,7 @@ enum { }; // array of pointer to string descriptors -char const* string_desc_arr [] = { +static char const* string_desc_arr [] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "PaniRCorp", // 1: Manufacturer "MicNode_4_Ch", // 2: Product @@ -156,18 +156,22 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if ( chr_count > max_count ) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { - _desc_str[1 + i] = str[i]; + _desc_str[1 + i] = (uint16_t) str[i]; } break; } diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index c4606528a..5d70903bc 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -123,7 +123,7 @@ void cdc_task(void) { static uint32_t btn_prev = 0; static cdc_notify_uart_state_t uart_state = { .value = 0 }; const uint32_t btn = board_button_read(); - if (!btn_prev && btn) { + if ((btn_prev == 0) && btn) { uart_state.dsr ^= 1; tud_cdc_notify_uart_state(&uart_state); } diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 80d86a4aa..088c5fec4 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -35,6 +35,7 @@ extern "C" { #include #include #include +#include #include "tusb.h" @@ -164,7 +165,7 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; - uint8_t const nibble = (uid[i] >> (j * 4)) & 0xf; + const uint8_t nibble = (uint8_t) ((uid[i] >> (j * 4)) & 0xf); desc_str1[i * 2 + (1 - j)] = nibble_to_hex[nibble]; // UTF-16-LE } } diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index bcfb67640..cff38cc22 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -905,7 +905,7 @@ typedef enum { AUDIO20_CHANNEL_CONFIG_BOTTOM_CENTER = 0x01000000, AUDIO20_CHANNEL_CONFIG_BACK_LEFT_OF_CENTER = 0x02000000, AUDIO20_CHANNEL_CONFIG_BACK_RIGHT_OF_CENTER = 0x04000000, - AUDIO20_CHANNEL_CONFIG_RAW_DATA = 0x80000000, + AUDIO20_CHANNEL_CONFIG_RAW_DATA = 0x80000000u, } audio20_channel_config_t; /// All remaining definitions are taken from the descriptor descriptions in the UAC2 main specification diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 1ce16f060..49421e865 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -76,7 +76,7 @@ /*------------------------------------------------------------------*/ /* Count number of arguments of __VA_ARGS__ - * - reference https://stackoverflow.com/questions/2124339/c-preprocessor-va-args-number-of-arguments + * - reference www.stackoverflow.com/questions/2124339/c-preprocessor-va-args-number-of-arguments * - _GET_NTH_ARG() takes args >= N (64) but only expand to Nth one (64th) * - _RSEQ_N() is reverse sequential to N to add padding to have * Nth position is the same as the number of arguments @@ -106,29 +106,29 @@ 19,18,17,16,15,14,13,12,11,10, \ 9,8,7,6,5,4,3,2,1,0 -// Apply an macro X to each of the arguments with an separated of choice -#define TU_ARGS_APPLY(_X, _s, ...) TU_XSTRCAT(_TU_ARGS_APPLY_, TU_ARGS_NUM(__VA_ARGS__))(_X, _s, __VA_ARGS__) - -#define _TU_ARGS_APPLY_1(_X, _s, _a1) _X(_a1) -#define _TU_ARGS_APPLY_2(_X, _s, _a1, _a2) _X(_a1) _s _X(_a2) -#define _TU_ARGS_APPLY_3(_X, _s, _a1, _a2, _a3) _X(_a1) _s _TU_ARGS_APPLY_2(_X, _s, _a2, _a3) -#define _TU_ARGS_APPLY_4(_X, _s, _a1, _a2, _a3, _a4) _X(_a1) _s _TU_ARGS_APPLY_3(_X, _s, _a2, _a3, _a4) -#define _TU_ARGS_APPLY_5(_X, _s, _a1, _a2, _a3, _a4, _a5) _X(_a1) _s _TU_ARGS_APPLY_4(_X, _s, _a2, _a3, _a4, _a5) -#define _TU_ARGS_APPLY_6(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1) _s _TU_ARGS_APPLY_5(_X, _s, _a2, _a3, _a4, _a5, _a6) -#define _TU_ARGS_APPLY_7(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1) _s _TU_ARGS_APPLY_6(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7) -#define _TU_ARGS_APPLY_8(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1) _s _TU_ARGS_APPLY_7(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7, _a8) - -// Apply an macro X to each of the arguments and expand the result with comma -#define TU_ARGS_APPLY_EXPAND(_X, ...) TU_XSTRCAT(_TU_ARGS_APPLY_EXPAND_, TU_ARGS_NUM(__VA_ARGS__))(_X, __VA_ARGS__) - -#define _TU_ARGS_APPLY_EXPAND_1(_X, _a1) _X(_a1) -#define _TU_ARGS_APPLY_EXPAND_2(_X, _a1, _a2) _X(_a1), _X(_a2) -#define _TU_ARGS_APPLY_EXPAND_3(_X, _a1, _a2, _a3) _X(_a1), _TU_ARGS_APPLY_EXPAND_2(_X, _a2, _a3) -#define _TU_ARGS_APPLY_EXPAND_4(_X, _a1, _a2, _a3, _a4) _X(_a1), _TU_ARGS_APPLY_EXPAND_3(_X, _a2, _a3, _a4) -#define _TU_ARGS_APPLY_EXPAND_5(_X, _a1, _a2, _a3, _a4, _a5) _X(_a1), _TU_ARGS_APPLY_EXPAND_4(_X, _a2, _a3, _a4, _a5) -#define _TU_ARGS_APPLY_EXPAND_6(_X, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1), _TU_ARGS_APPLY_EXPAND_5(_X, _a2, _a3, _a4, _a5, _a6) -#define _TU_ARGS_APPLY_EXPAND_7(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1), _TU_ARGS_APPLY_EXPAND_6(_X, _a2, _a3, _a4, _a5, _a6, _a7) -#define _TU_ARGS_APPLY_EXPAND_8(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1), _TU_ARGS_APPLY_EXPAND_7(_X, _a2, _a3, _a4, _a5, _a6, _a7, _a8) +// Apply a macro X to each of the arguments with a selected separation/delimiter +#define TU_ARGS_APPLY(_X, _s, ...) TU_XSTRCAT(TU_ARGS_APPLY_, TU_ARGS_NUM(__VA_ARGS__))(_X, _s, __VA_ARGS__) + +#define TU_ARGS_APPLY_1(_X, _s, _a1) _X(_a1) +#define TU_ARGS_APPLY_2(_X, _s, _a1, _a2) _X(_a1) _s _X(_a2) +#define TU_ARGS_APPLY_3(_X, _s, _a1, _a2, _a3) _X(_a1) _s TU_ARGS_APPLY_2(_X, _s, _a2, _a3) +#define TU_ARGS_APPLY_4(_X, _s, _a1, _a2, _a3, _a4) _X(_a1) _s TU_ARGS_APPLY_3(_X, _s, _a2, _a3, _a4) +#define TU_ARGS_APPLY_5(_X, _s, _a1, _a2, _a3, _a4, _a5) _X(_a1) _s TU_ARGS_APPLY_4(_X, _s, _a2, _a3, _a4, _a5) +#define TU_ARGS_APPLY_6(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1) _s TU_ARGS_APPLY_5(_X, _s, _a2, _a3, _a4, _a5, _a6) +#define TU_ARGS_APPLY_7(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1) _s TU_ARGS_APPLY_6(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7) +#define TU_ARGS_APPLY_8(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1) _s TU_ARGS_APPLY_7(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7, _a8) + +// Apply a macro X to each of the arguments and expand the result with comma +#define TU_ARGS_APPLY_EXPAND(_X, ...) TU_XSTRCAT(TU_ARGS_APPLY_EXPAND_, TU_ARGS_NUM(__VA_ARGS__))(_X, __VA_ARGS__) + +#define TU_ARGS_APPLY_EXPAND_1(_X, _a1) _X(_a1) +#define TU_ARGS_APPLY_EXPAND_2(_X, _a1, _a2) _X(_a1), _X(_a2) +#define TU_ARGS_APPLY_EXPAND_3(_X, _a1, _a2, _a3) _X(_a1), TU_ARGS_APPLY_EXPAND_2(_X, _a2, _a3) +#define TU_ARGS_APPLY_EXPAND_4(_X, _a1, _a2, _a3, _a4) _X(_a1), TU_ARGS_APPLY_EXPAND_3(_X, _a2, _a3, _a4) +#define TU_ARGS_APPLY_EXPAND_5(_X, _a1, _a2, _a3, _a4, _a5) _X(_a1), TU_ARGS_APPLY_EXPAND_4(_X, _a2, _a3, _a4, _a5) +#define TU_ARGS_APPLY_EXPAND_6(_X, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1), TU_ARGS_APPLY_EXPAND_5(_X, _a2, _a3, _a4, _a5, _a6) +#define TU_ARGS_APPLY_EXPAND_7(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1), TU_ARGS_APPLY_EXPAND_6(_X, _a2, _a3, _a4, _a5, _a6, _a7) +#define TU_ARGS_APPLY_EXPAND_8(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1), TU_ARGS_APPLY_EXPAND_7(_X, _a2, _a3, _a4, _a5, _a6, _a7, _a8) //--------------------------------------------------------------------+ // Macro for function default arguments diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 4f2b66e6a..9197381cf 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -544,11 +544,11 @@ TU_ATTR_ALWAYS_INLINE static inline tusb_dir_t tu_edpt_dir(uint8_t addr) { // Get Endpoint number from address TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_number(uint8_t addr) { - return (uint8_t)(addr & (~TUSB_DIR_IN_MASK)); + return (uint8_t) (addr & (~TUSB_DIR_IN_MASK)); } TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_addr(uint8_t num, uint8_t dir) { - return (uint8_t)(num | (dir ? TUSB_DIR_IN_MASK : 0)); + return (uint8_t) (num | (dir ? TUSB_DIR_IN_MASK : 0)); } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_edpt_packet_size(tusb_desc_endpoint_t const* desc_ep) { diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index bde5ec010..9aeda4d01 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -70,15 +70,15 @@ typedef struct { } osal_queue_def_t; #if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) - #define _OSAL_Q_NAME(_name) .name = #_name + #define OSAL_Q_NAME(_name) .name = #_name #else - #define _OSAL_Q_NAME(_name) + #define OSAL_Q_NAME(_name) #endif // _int_set is not used with an RTOS #define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ static _type _name##_##buf[_depth];\ - osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf, _OSAL_Q_NAME(_name) } + osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf, OSAL_Q_NAME(_name) } //--------------------------------------------------------------------+ // TASK API @@ -137,7 +137,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { if (in_isr) { - if (!TUP_MCU_MULTIPLE_CORE) { + if (TUP_MCU_MULTIPLE_CORE == 0) { (void) ctx; return; // single core MCU does not need to lock in ISR } @@ -149,7 +149,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bo TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { if (in_isr) { - if (!TUP_MCU_MULTIPLE_CORE) { + if (TUP_MCU_MULTIPLE_CORE == 0) { (void) ctx; return; // single core MCU does not need to lock in ISR } @@ -166,7 +166,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t *semdef) { #if configSUPPORT_STATIC_ALLOCATION - return xSemaphoreCreateBinaryStatic(semdef); + return xSemaphoreCreateBinaryStatic((StaticSemaphore_t*) semdef); #else (void) semdef; return xSemaphoreCreateBinary(); @@ -174,7 +174,7 @@ TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_ } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t semd_hdl) { - vSemaphoreDelete(semd_hdl); + vSemaphoreDelete((SemaphoreHandle_t) semd_hdl); return true; } diff --git a/src/tusb_option.h b/src/tusb_option.h index e00311039..4110dbdee 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -217,9 +217,9 @@ #define OPT_MCU_AT32F413 2506 ///< ArteryTek AT32F413 // Check if configured MCU is one of listed -// Apply _TU_CHECK_MCU with || as separator to list of input -#define _TU_CHECK_MCU(_m) (CFG_TUSB_MCU == _m) -#define TU_CHECK_MCU(...) (TU_ARGS_APPLY(_TU_CHECK_MCU, ||, __VA_ARGS__)) +// Apply TU_MCU_IS_EQUAL with || as separator to list of input +#define TU_MCU_IS_EQUAL(_m) (CFG_TUSB_MCU == (_m)) +#define TU_CHECK_MCU(...) (TU_ARGS_APPLY(TU_MCU_IS_EQUAL, ||, __VA_ARGS__)) //--------------------------------------------------------------------+ // Supported OS -- cgit v1.3.1 From 22f01aea0d31b5a54532877d02d61f51041aeb6f Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 3 Nov 2025 15:14:52 +0700 Subject: fix more warnings/alerts --- .PVS-Studio/.pvsconfig | 4 +- src/class/video/video_device.c | 180 ++++++++++++++++++++++++++--------------- src/common/tusb_verify.h | 2 +- src/host/usbh.c | 18 ++--- src/portable/ohci/ohci.c | 6 +- 5 files changed, 130 insertions(+), 80 deletions(-) diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index b722c6d10..32125c2f7 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -1 +1,3 @@ -//-V::2506,2514 +//-V::2506 +//-V::2514 +//-V::2614 diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 5c00cc358..087292e56 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -103,7 +103,7 @@ typedef struct TU_ATTR_PACKED { uint8_t index_vc; /* index of bound video control interface */ uint8_t index_vs; /* index from the video control interface */ struct { - uint16_t beg; /* Offset of the begging of video streaming interface descriptor */ + uint16_t beg; /* Offset of the beginning of video streaming interface descriptor */ uint16_t end; /* Offset of the end of video streaming interface descriptor */ uint16_t cur; /* Offset of the current settings */ uint16_t ep[2]; /* Offset of endpoint descriptors. 0: streaming, 1: still capture */ @@ -244,9 +244,13 @@ static inline uint8_t _desc_ep_addr(void const *desc) { * @return instance */ static videod_streaming_interface_t* _get_instance_streaming(uint_fast8_t ctl_idx, uint_fast8_t stm_idx) { videod_interface_t *ctl = &_videod_itf[ctl_idx]; - if (!ctl->beg) return NULL; + if (!ctl->beg) { + return NULL; + } videod_streaming_interface_t *stm = &_videod_streaming_itf[ctl->stm[stm_idx]]; - if (!stm->desc.beg) return NULL; + if (!stm->desc.beg) { + return NULL; + } return stm; } @@ -255,7 +259,9 @@ static tusb_desc_vc_itf_t const* _get_desc_vc(videod_interface_t const *self) { } static tusb_desc_vs_itf_t const* _get_desc_vs(videod_streaming_interface_t const *self) { - if (!self->desc.cur) return NULL; + if (!self->desc.cur) { + return NULL; + } uint8_t const *desc = _videod_itf[self->index_vc].beg; return (tusb_desc_vs_itf_t const*)(desc + self->desc.cur); } @@ -366,8 +372,12 @@ static void const* _find_desc_ep(void const *beg, void const *end) { for (void const *cur = beg; cur < end; cur = tu_desc_next(cur)) { uint_fast8_t desc_type = tu_desc_type(cur); - if (TUSB_DESC_ENDPOINT == desc_type) return cur; - if (TUSB_DESC_INTERFACE == desc_type) break; + if (TUSB_DESC_ENDPOINT == desc_type) { + return cur; + } + if (TUSB_DESC_INTERFACE == desc_type) { + break; + } } return end; } @@ -453,7 +463,7 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm tusb_desc_vs_itf_t const *vs = _get_desc_vs(stm); uint_fast8_t fmtnum = param->bFormatIndex; TU_ASSERT(vs && fmtnum <= vs->stm.bNumFormats); - if (!fmtnum) { + if (0 == fmtnum) { if (1 < vs->stm.bNumFormats) return true; /* Need to negotiate all variables. */ fmtnum = 1; param->bFormatIndex = 1; @@ -492,8 +502,10 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm uint_fast8_t frmnum = param->bFrameIndex; TU_ASSERT(frmnum <= fmt->bNumFrameDescriptors); - if (!frmnum) { - if (1 < fmt->bNumFrameDescriptors) return true; + if (0 == frmnum) { + if (1 < fmt->bNumFrameDescriptors) { + return true; + } frmnum = 1; param->bFrameIndex = 1; } @@ -502,7 +514,7 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm /* Set the parameters determined by the frame */ uint_fast32_t frame_size = param->dwMaxVideoFrameSize; - if (!frame_size) { + if (0 == frame_size) { switch (fmt->bDescriptorSubType) { case VIDEO_CS_ITF_VS_FORMAT_UNCOMPRESSED: frame_size = (uint_fast32_t)frm->wWidth * frm->wHeight * fmt->uncompressed.bBitsPerPixel / 8; @@ -522,7 +534,7 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm } uint_fast32_t interval = param->dwFrameInterval; - if (!interval) { + if (0 == interval) { if ((1 < frm->uncompressed.bFrameIntervalType) || ((0 == frm->uncompressed.bFrameIntervalType) && (frm->uncompressed.dwFrameInterval[1] != frm->uncompressed.dwFrameInterval[0]))) { @@ -532,7 +544,7 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm param->dwFrameInterval = interval; } uint_fast32_t interval_ms = interval / 10000; - TU_ASSERT(interval_ms); + TU_ASSERT(interval_ms != 0); uint_fast32_t payload_size = (frame_size + interval_ms - 1) / interval_ms + 2; if (CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE < payload_size) { payload_size = CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE; @@ -550,7 +562,7 @@ static bool _negotiate_streaming_parameters(videod_streaming_interface_t const * video_probe_and_commit_control_t *param) { uint_fast8_t const fmtnum = param->bFormatIndex; - if (!fmtnum) { + if (0 == fmtnum) { switch (request) { case VIDEO_REQUEST_GET_MAX: if (_get_desc_vs(stm)) @@ -581,7 +593,7 @@ static bool _negotiate_streaming_parameters(videod_streaming_interface_t const * } uint_fast8_t frmnum = param->bFrameIndex; - if (!frmnum) { + if (0 == frmnum) { tusb_desc_vs_itf_t const *vs = _get_desc_vs(stm); TU_ASSERT(vs); void const *end = _end_of_streaming_descriptor(vs); @@ -637,7 +649,7 @@ static bool _negotiate_streaming_parameters(videod_streaming_interface_t const * return true; } - if (!param->dwFrameInterval) { + if (0 == param->dwFrameInterval) { tusb_desc_vs_itf_t const *vs = _get_desc_vs(stm); TU_ASSERT(vs); void const *end = _end_of_streaming_descriptor(vs); @@ -686,12 +698,12 @@ static bool _negotiate_streaming_parameters(videod_streaming_interface_t const * default: return false; } param->dwFrameInterval = interval; - if (!interval) { + if (0 == interval) { param->dwMaxPayloadTransferSize = 0; } else { uint_fast32_t frame_size = param->dwMaxVideoFrameSize; uint_fast32_t payload_size; - if (!interval_ms) { + if (0 == interval_ms) { payload_size = frame_size + 2; } else { payload_size = (frame_size + interval_ms - 1) / interval_ms + 2; @@ -719,7 +731,7 @@ static bool _close_vc_itf(uint8_t rhport, videod_interface_t *self) /* The end of the video control interface descriptor. */ void const *end = _end_of_control_descriptor(vc); - if (vc->std.bNumEndpoints) { + if (vc->std.bNumEndpoints != 0) { /* Find the notification endpoint descriptor. */ cur = _find_desc(cur, end, TUSB_DESC_ENDPOINT); TU_ASSERT(cur < end); @@ -757,7 +769,7 @@ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t cur += vc->std.bLength + vc->ctl.bLength; TU_LOG_DRV(" bNumEndpoints %d\r\n", vc->std.bNumEndpoints); /* Open the notification endpoint if it exist. */ - if (vc->std.bNumEndpoints) { + if (vc->std.bNumEndpoints != 0) { /* Support for 1 endpoint only. */ TU_VERIFY(1 == vc->std.bNumEndpoints); /* Find the notification endpoint descriptor. */ @@ -843,7 +855,7 @@ static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint stm->desc.ep[i] = (uint16_t) (cur - desc); TU_LOG_DRV(" open EP%02x\r\n", _desc_ep_addr(cur)); } - if (altnum) { + if (altnum != 0) { stm->state = VS_STATE_STREAMING; } TU_LOG_DRV(" done\r\n"); @@ -929,16 +941,14 @@ static int handle_video_ctl_cs_req(uint8_t rhport, uint8_t stage, return VIDEO_ERROR_NONE; case VIDEO_REQUEST_GET_CUR: - if (stage == CONTROL_STAGE_SETUP) - { + if (stage == CONTROL_STAGE_SETUP) { TU_VERIFY(1 == request->wLength, VIDEO_ERROR_UNKNOWN); TU_VERIFY(tud_control_xfer(rhport, request, &self->power_mode, sizeof(self->power_mode)), VIDEO_ERROR_UNKNOWN); } return VIDEO_ERROR_NONE; case VIDEO_REQUEST_GET_INFO: - if (stage == CONTROL_STAGE_SETUP) - { + if (stage == CONTROL_STAGE_SETUP) { TU_VERIFY(1 == request->wLength, VIDEO_ERROR_UNKNOWN); TU_VERIFY(tud_control_xfer(rhport, request, (uint8_t*)(uintptr_t) &_cap_get_set, sizeof(_cap_get_set)), VIDEO_ERROR_UNKNOWN); } @@ -951,15 +961,13 @@ static int handle_video_ctl_cs_req(uint8_t rhport, uint8_t stage, case VIDEO_VC_CTL_REQUEST_ERROR_CODE: switch (request->bRequest) { case VIDEO_REQUEST_GET_CUR: - if (stage == CONTROL_STAGE_SETUP) - { + if (stage == CONTROL_STAGE_SETUP) { TU_VERIFY(tud_control_xfer(rhport, request, &self->error_code, sizeof(uint8_t)), VIDEO_ERROR_UNKNOWN); } return VIDEO_ERROR_NONE; case VIDEO_REQUEST_GET_INFO: - if (stage == CONTROL_STAGE_SETUP) - { + if (stage == CONTROL_STAGE_SETUP) { TU_VERIFY(tud_control_xfer(rhport, request, (uint8_t*)(uintptr_t) &_cap_get, sizeof(_cap_get)), VIDEO_ERROR_UNKNOWN); } return VIDEO_ERROR_NONE; @@ -986,7 +994,7 @@ static int handle_video_ctl_req(uint8_t rhport, uint8_t stage, case TUSB_REQ_TYPE_CLASS: { uint_fast8_t entity_id = TU_U16_HIGH(request->wIndex); - if (!entity_id) { + if (0 == entity_id) { return handle_video_ctl_cs_req(rhport, stage, request, ctl_idx); } else { TU_VERIFY(_find_desc_entity(_get_desc_vc(&_videod_itf[ctl_idx]), entity_id), VIDEO_ERROR_INVALID_REQUEST); @@ -1001,14 +1009,12 @@ static int handle_video_ctl_req(uint8_t rhport, uint8_t stage, static int handle_video_stm_std_req(uint8_t rhport, uint8_t stage, tusb_control_request_t const *request, - uint_fast8_t stm_idx) -{ + uint_fast8_t stm_idx) { TU_LOG_DRV("\r\n"); videod_streaming_interface_t *self = &_videod_streaming_itf[stm_idx]; switch (request->bRequest) { case TUSB_REQ_GET_INTERFACE: - if (stage == CONTROL_STAGE_SETUP) - { + if (stage == CONTROL_STAGE_SETUP) { TU_VERIFY(1 == request->wLength, VIDEO_ERROR_UNKNOWN); tusb_desc_vs_itf_t const *vs = _get_desc_vs(self); TU_VERIFY(vs, VIDEO_ERROR_UNKNOWN); @@ -1075,12 +1081,14 @@ static int handle_video_stm_cs_req(uint8_t rhport, uint8_t stage, } else if (stage == CONTROL_STAGE_DATA) { TU_VERIFY(_update_streaming_parameters(stm, &stm->probe_commit_payload), VIDEO_ERROR_INVALID_VALUE_WITHIN_RANGE); + } else { + // nothing to do } return VIDEO_ERROR_NONE; case VIDEO_REQUEST_GET_CUR: if (stage == CONTROL_STAGE_SETUP) { - TU_VERIFY(request->wLength, VIDEO_ERROR_UNKNOWN); + TU_VERIFY(request->wLength != 0, VIDEO_ERROR_UNKNOWN); TU_VERIFY(tud_control_xfer(rhport, request, &stm->probe_commit_payload, sizeof(video_probe_and_commit_control_t)), VIDEO_ERROR_UNKNOWN); } return VIDEO_ERROR_NONE; @@ -1090,7 +1098,7 @@ static int handle_video_stm_cs_req(uint8_t rhport, uint8_t stage, case VIDEO_REQUEST_GET_RES: case VIDEO_REQUEST_GET_DEF: if (stage == CONTROL_STAGE_SETUP) { - TU_VERIFY(request->wLength, VIDEO_ERROR_UNKNOWN); + TU_VERIFY(request->wLength != 0, VIDEO_ERROR_UNKNOWN); video_probe_and_commit_control_t tmp = stm->probe_commit_payload; TU_VERIFY(_negotiate_streaming_parameters(stm, request->bRequest, &tmp), VIDEO_ERROR_INVALID_VALUE_WITHIN_RANGE); TU_VERIFY(tud_control_xfer(rhport, request, &tmp, sizeof(tmp)), VIDEO_ERROR_UNKNOWN); @@ -1137,12 +1145,14 @@ static int handle_video_stm_cs_req(uint8_t rhport, uint8_t stage, hdr->bHeaderLength = sizeof(*hdr); hdr->bmHeaderInfo = 0; } + } else { + // nothing to do } return VIDEO_ERROR_NONE; case VIDEO_REQUEST_GET_CUR: if (stage == CONTROL_STAGE_SETUP) { - TU_VERIFY(request->wLength, VIDEO_ERROR_UNKNOWN); + TU_VERIFY(request->wLength != 0, VIDEO_ERROR_UNKNOWN); TU_VERIFY(tud_control_xfer(rhport, request, &stm->probe_commit_payload, sizeof(video_probe_and_commit_control_t)), VIDEO_ERROR_UNKNOWN); } return VIDEO_ERROR_NONE; @@ -1185,14 +1195,15 @@ static int handle_video_stm_cs_req(uint8_t rhport, uint8_t stage, static int handle_video_stm_req(uint8_t rhport, uint8_t stage, tusb_control_request_t const *request, - uint_fast8_t stm_idx) -{ + uint_fast8_t stm_idx) { switch (request->bmRequestType_bit.type) { case TUSB_REQ_TYPE_STANDARD: return handle_video_stm_std_req(rhport, stage, request, stm_idx); case TUSB_REQ_TYPE_CLASS: - if (TU_U16_HIGH(request->wIndex)) return VIDEO_ERROR_INVALID_REQUEST; + if (0 != TU_U16_HIGH(request->wIndex)) { + return VIDEO_ERROR_INVALID_REQUEST; + } return handle_video_stm_cs_req(rhport, stage, request, stm_idx); default: return VIDEO_ERROR_INVALID_REQUEST; @@ -1203,11 +1214,12 @@ static int handle_video_stm_req(uint8_t rhport, uint8_t stage, // APPLICATION API //--------------------------------------------------------------------+ -bool tud_video_n_connected(uint_fast8_t ctl_idx) -{ +bool tud_video_n_connected(uint_fast8_t ctl_idx) { TU_ASSERT(ctl_idx < CFG_TUD_VIDEO); videod_streaming_interface_t *stm = _get_instance_streaming(ctl_idx, 0); - if (stm) return true; + if (stm != NULL) { + return true; + } return false; } @@ -1216,15 +1228,21 @@ bool tud_video_n_streaming(uint_fast8_t ctl_idx, uint_fast8_t stm_idx) TU_ASSERT(ctl_idx < CFG_TUD_VIDEO); TU_ASSERT(stm_idx < CFG_TUD_VIDEO_STREAMING); videod_streaming_interface_t *stm = _get_instance_streaming(ctl_idx, stm_idx); - if (!stm || !stm->desc.ep[0]) return false; - if (stm->state == VS_STATE_PROBING) return false; + if (NULL == stm || 0 == stm->desc.ep[0]) { + return false; + } + if (stm->state == VS_STATE_PROBING) { + return false; + } -#ifdef TUP_DCD_EDPT_ISO_ALLOC + #ifdef TUP_DCD_EDPT_ISO_ALLOC uint8_t const *desc = _videod_itf[stm->index_vc].beg; uint_fast16_t ofs_ep = stm->desc.ep[0]; tusb_desc_endpoint_t const *ep = (tusb_desc_endpoint_t const*)(desc + ofs_ep); if (ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { - if (stm->state == VS_STATE_COMMITTED) return false; + if (stm->state == VS_STATE_COMMITTED) { + return false; + } } #endif @@ -1235,25 +1253,35 @@ bool tud_video_n_frame_xfer(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void *bu TU_ASSERT(ctl_idx < CFG_TUD_VIDEO); TU_ASSERT(stm_idx < CFG_TUD_VIDEO_STREAMING); - if (!buffer || !bufsize) return false; + if (NULL == buffer || 0 == bufsize) { + return false; + } videod_streaming_interface_t *stm = _get_instance_streaming(ctl_idx, stm_idx); videod_streaming_epbuf_t *stm_epbuf = &_videod_streaming_epbuf[ctl_idx]; - if (!stm || !stm->desc.ep[0] || stm->buffer) return false; - if (stm->state == VS_STATE_PROBING) return false; + if ( NULL == stm || 0 == stm->desc.ep[0] || stm->buffer) { + return false; + } + if (stm->state == VS_STATE_PROBING) { + return false; + } /* Find EP address */ uint8_t const *desc = _videod_itf[stm->index_vc].beg; uint8_t ep_addr = 0; for (uint_fast8_t i = 0; i < CFG_TUD_VIDEO_STREAMING; ++i) { uint_fast16_t ofs_ep = stm->desc.ep[i]; - if (!ofs_ep) continue; + if (0 == ofs_ep) { + continue; + } ep_addr = _desc_ep_addr(desc + ofs_ep); break; } - if (!ep_addr) return false; + if (0 == ep_addr) { + return false; + } - TU_VERIFY( usbd_edpt_claim(0, ep_addr) ); + TU_VERIFY(usbd_edpt_claim(0, ep_addr)); /* update the packet header */ tusb_video_payload_header_t *hdr = (tusb_video_payload_header_t*)stm_epbuf->buf; hdr->FrameID ^= 1; @@ -1305,7 +1333,9 @@ uint16_t videod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin videod_interface_t *self = NULL; uint8_t ctl_idx; for (ctl_idx = 0; ctl_idx < CFG_TUD_VIDEO; ++ctl_idx) { - if (_videod_itf[ctl_idx].beg) continue; + if (NULL != _videod_itf[ctl_idx].beg) { + continue; + } self = &_videod_itf[ctl_idx]; break; } @@ -1326,7 +1356,9 @@ uint16_t videod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin videod_streaming_interface_t *stm = NULL; /* find free streaming interface handle */ for (uint8_t i = 0; i < CFG_TUD_VIDEO_STREAMING; ++i) { - if (_videod_streaming_itf[i].desc.beg) continue; + if (0 != _videod_streaming_itf[i].desc.beg) { + continue; + } stm = &_videod_streaming_itf[i]; self->stm[stm_idx] = i; break; @@ -1354,7 +1386,9 @@ uint16_t videod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin } p_desc = tu_desc_next(p_desc); } - if(ep_addr > 0 && ep_size > 0) usbd_edpt_iso_alloc(rhport, ep_addr, ep_size); + if(ep_addr > 0 && ep_size > 0) { + usbd_edpt_iso_alloc(rhport, ep_addr, ep_size); + } #endif if (0 == stm_idx && 1 == bInCollection) { /* If there is only one streaming interface and no alternate settings, @@ -1381,31 +1415,43 @@ bool videod_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_ uint_fast8_t itf; for (itf = 0; itf < CFG_TUD_VIDEO; ++itf) { void const *desc = _videod_itf[itf].beg; - if (!desc) continue; - if (itfnum == _desc_itfnum(desc)) break; + if (!desc) { + continue; + } + if (itfnum == _desc_itfnum(desc)) { + break; + } } if (itf < CFG_TUD_VIDEO) { TU_LOG_DRV(" VC[%d]: ", itf); err = handle_video_ctl_req(rhport, stage, request, itf); _videod_itf[itf].error_code = (uint8_t)err; - if (err) return false; + if (0 != err) { + return false; + } return true; } /* Identify which streaming interface to use */ for (itf = 0; itf < CFG_TUD_VIDEO_STREAMING; ++itf) { videod_streaming_interface_t *stm = &_videod_streaming_itf[itf]; - if (!stm->desc.beg) continue; + if (0 == stm->desc.beg) { + continue; + } uint8_t const *desc = _videod_itf[stm->index_vc].beg; - if (itfnum == _desc_itfnum(desc + stm->desc.beg)) break; + if (itfnum == _desc_itfnum(desc + stm->desc.beg)) { + break; + } } if (itf < CFG_TUD_VIDEO_STREAMING) { TU_LOG_DRV(" VS[%d]: ", itf); err = handle_video_stm_req(rhport, stage, request, itf); _videod_streaming_itf[itf].error_code = (uint8_t)err; - if (err) return false; + if (err != 0) { + return false; + } return true; } return false; @@ -1421,19 +1467,23 @@ bool videod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 for (itf = 0; itf < CFG_TUD_VIDEO_STREAMING; ++itf) { stm = &_videod_streaming_itf[itf]; uint_fast16_t const ep_ofs = stm->desc.ep[0]; - if (!ep_ofs) continue; + if (0 == ep_ofs) { + continue; + } ctl = &_videod_itf[stm->index_vc]; uint8_t const *desc = ctl->beg; - if (ep_addr == _desc_ep_addr(desc + ep_ofs)) break; + if (ep_addr == _desc_ep_addr(desc + ep_ofs)) { + break; + } } TU_ASSERT(itf < CFG_TUD_VIDEO_STREAMING); videod_streaming_epbuf_t *stm_epbuf = &_videod_streaming_epbuf[itf]; if (stm->offset < stm->bufsize) { /* Claim the endpoint */ - TU_VERIFY( usbd_edpt_claim(rhport, ep_addr), 0); + TU_VERIFY(usbd_edpt_claim(rhport, ep_addr), 0); uint_fast16_t pkt_len = _prepare_in_payload(stm, stm_epbuf->buf); - TU_ASSERT( usbd_edpt_xfer(rhport, ep_addr, stm_epbuf->buf, (uint16_t) pkt_len), 0); + TU_ASSERT(usbd_edpt_xfer(rhport, ep_addr, stm_epbuf->buf, (uint16_t) pkt_len), 0); } else { stm->buffer = NULL; stm->bufsize = 0; diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 9dc73aa60..d6806d44a 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -78,7 +78,7 @@ defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) #define TU_BREAKPOINT() do { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \ + if (0 != ((*ARM_CM_DHCSR) & 1UL)) {__asm("BKPT #0\n");} /* Only halt mcu if debugger is attached */ \ } while(0) #elif defined(__riscv) && !TUSB_MCU_VENDOR_ESPRESSIF diff --git a/src/host/usbh.c b/src/host/usbh.c index 6bafde368..0330320f8 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -1314,7 +1314,7 @@ static void process_removed_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub do { for (uint8_t dev_id = 0; dev_id < TOTAL_DEVICES; dev_id++) { usbh_device_t* dev = &_usbh_devices[dev_id]; - uint8_t const daddr = dev_id + 1; + uint8_t const daddr = dev_id + 1u; // hub_addr = 0 means roothub, hub_port = 0 means all devices of downstream hub if (dev->bus_info.rhport == rhport && dev->connected && @@ -1336,7 +1336,7 @@ static void process_removed_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub // Close class driver for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { usbh_class_driver_t const* driver = get_driver(drv_id); - if (driver) { + if (driver != NULL) { driver->close(daddr); } } @@ -1354,7 +1354,7 @@ static void process_removed_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub // find a marked hub to process for (uint8_t h_id = 0; h_id < CFG_TUH_HUB; h_id++) { - if (removing_hubs[h_id]) { + if (0 != removing_hubs[h_id]) { removing_hubs[h_id] = 0; // update hub_addr and hub_port for next loop @@ -1513,7 +1513,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { hub_port_status_response_t port_status; hub_port_get_status_local(dev0_bus->hub_addr, dev0_bus->hub_port, &port_status); - if (!port_status.status.connection) { + if (0 == port_status.status.connection) { TU_LOG_USBH("Device unplugged from hub while debouncing\r\n"); enum_full_complete(); return; @@ -1535,7 +1535,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { hub_port_status_response_t port_status; hub_port_get_status_local(dev0_bus->hub_addr, dev0_bus->hub_port, &port_status); - if (port_status.change.reset) { + if (1 == port_status.change.reset) { // Acknowledge Port Reset Change TU_ASSERT(hub_port_clear_reset_change(dev0_bus->hub_addr, dev0_bus->hub_port, process_enumeration, ENUM_HUB_CLEAR_RESET_COMPLETE),); } else { @@ -1550,7 +1550,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { hub_port_status_response_t port_status; hub_port_get_status_local(dev0_bus->hub_addr, dev0_bus->hub_port, &port_status); - if (!port_status.status.connection) { + if (0 == port_status.status.connection) { TU_LOG_USBH("Device unplugged from hub (not addressed yet)\r\n"); enum_full_complete(); return; @@ -1748,7 +1748,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { case ENUM_SET_CONFIG: { uint8_t config_idx = (uint8_t) tu_le16toh(xfer->setup->wIndex); if (tuh_enum_descriptor_configuration_cb(daddr, config_idx, (const tusb_desc_configuration_t*) _usbh_epbuf.ctrl)) { - TU_ASSERT(tuh_configuration_set(daddr, config_idx+1, process_enumeration, ENUM_CONFIG_DRIVER),); + TU_ASSERT(tuh_configuration_set(daddr, config_idx+1u, process_enumeration, ENUM_CONFIG_DRIVER),); } else { config_idx++; TU_ASSERT(config_idx < dev->bNumConfigurations,); @@ -1794,7 +1794,7 @@ static uint8_t enum_get_new_address(bool is_hub) { } for (uint8_t idx = start; idx < end; idx++) { - if (!_usbh_devices[idx].connected) { + if (0 == _usbh_devices[idx].connected) { return (idx + 1); } } @@ -1904,7 +1904,7 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { // with usbh_driver_set_config_complete() uint8_t const drv_id = dev->itf2drv[itf_num]; usbh_class_driver_t const * driver = get_driver(drv_id); - if (driver) { + if (driver != NULL) { TU_LOG_USBH("%s set config: itf = %u\r\n", driver->name, itf_num); driver->set_config(dev_addr, itf_num); break; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index f6ee7e764..5ca093506 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -494,8 +494,7 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet return true; } -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) -{ +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); @@ -509,11 +508,10 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * } ohci_ed_t * ed = ed_from_addr(dev_addr, ep_addr); + TU_ASSERT(ed); if (epnum == 0) { ohci_gtd_t* gtd = &ohci_data.control[dev_addr].gtd; - gtd_init(gtd, buffer, buflen); - gtd->index = dev_addr; gtd->pid = dir ? PID_IN : PID_OUT; gtd->data_toggle = GTD_DT_DATA1; // Both Data and Ack stage start with DATA1 -- cgit v1.3.1 From 8979af34c0e5b97520070bcfdffe5280de9ac24c Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 3 Nov 2025 16:36:07 +0700 Subject: Fixed more alert found by PVS-Studio --- .../audio_test_multi_rate/src/usb_descriptors.h | 4 +- examples/device/cdc_msc/src/main.c | 2 +- examples/device/cdc_uac2/src/cdc_app.c | 19 ++-- examples/device/cdc_uac2/src/usb_descriptors.h | 4 +- examples/device/net_lwip_webserver/src/lwipopts.h | 4 +- examples/device/uac2_headset/src/usb_descriptors.h | 4 +- .../device/uac2_speaker_fb/src/usb_descriptors.h | 4 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 8 +- hw/bsp/board.c | 5 +- hw/bsp/board_api.h | 2 +- src/class/cdc/cdc.h | 18 ++-- src/class/video/video_device.c | 6 +- src/common/tusb_common.h | 16 ++- src/common/tusb_compiler.h | 16 +-- src/common/tusb_fifo.c | 42 ++++---- src/common/tusb_private.h | 4 +- src/common/tusb_types.h | 2 +- src/common/tusb_verify.h | 4 +- src/device/dcd.h | 2 +- src/device/usbd.c | 120 ++++++++++----------- src/device/usbd.h | 60 ++++++----- src/device/usbd_pvt.h | 4 +- src/portable/synopsys/dwc2/dcd_dwc2.c | 76 +++++++------ src/portable/synopsys/dwc2/dwc2_stm32.h | 4 +- src/portable/synopsys/dwc2/dwc2_type.h | 2 +- 25 files changed, 224 insertions(+), 208 deletions(-) diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index c02f40cd9..948a7f4ae 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -23,8 +23,8 @@ * */ -#ifndef _USB_DESCRIPTORS_H_ -#define _USB_DESCRIPTORS_H_ +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ // #include "tusb.h" diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 5d70903bc..ff998a13d 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -123,7 +123,7 @@ void cdc_task(void) { static uint32_t btn_prev = 0; static cdc_notify_uart_state_t uart_state = { .value = 0 }; const uint32_t btn = board_button_read(); - if ((btn_prev == 0) && btn) { + if ((btn_prev == 0u) && btn) { uart_state.dsr ^= 1; tud_cdc_notify_uart_state(&uart_state); } diff --git a/examples/device/cdc_uac2/src/cdc_app.c b/examples/device/cdc_uac2/src/cdc_app.c index 2166c1d6b..e3ad8a9ac 100644 --- a/examples/device/cdc_uac2/src/cdc_app.c +++ b/examples/device/cdc_uac2/src/cdc_app.c @@ -29,33 +29,26 @@ #include "common.h" // Invoked when cdc when line state changed e.g connected/disconnected -void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) -{ +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { (void) itf; (void) rts; - if (dtr) - { + if (dtr) { // Terminal connected - } - else - { + } else { // Terminal disconnected } } // Invoked when CDC interface received data from host -void tud_cdc_rx_cb(uint8_t itf) -{ +void tud_cdc_rx_cb(uint8_t itf) { uint8_t buf[64]; uint32_t count; // connected() check for DTR bit // Most but not all terminal client set this when making connection - if (tud_cdc_connected()) - { - if (tud_cdc_available()) // data is available - { + if (tud_cdc_connected()) { + if (tud_cdc_available()) { count = tud_cdc_n_read(itf, buf, sizeof(buf)); (void) count; diff --git a/examples/device/cdc_uac2/src/usb_descriptors.h b/examples/device/cdc_uac2/src/usb_descriptors.h index 95d8da5c3..139384d3e 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.h +++ b/examples/device/cdc_uac2/src/usb_descriptors.h @@ -24,8 +24,8 @@ * */ -#ifndef _USB_DESCRIPTORS_H_ -#define _USB_DESCRIPTORS_H_ +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ // #include "tusb.h" diff --git a/examples/device/net_lwip_webserver/src/lwipopts.h b/examples/device/net_lwip_webserver/src/lwipopts.h index 04949cef9..11686ce2a 100644 --- a/examples/device/net_lwip_webserver/src/lwipopts.h +++ b/examples/device/net_lwip_webserver/src/lwipopts.h @@ -29,8 +29,8 @@ * Author: Simon Goldschmidt * */ -#ifndef __LWIPOPTS_H__ -#define __LWIPOPTS_H__ +#ifndef LWIPOPTS_H__ +#define LWIPOPTS_H__ /* Prevent having to link sys_arch.c (we don't test the API layers in unit tests) */ #define NO_SYS 1 diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index d673beace..47154626e 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -23,8 +23,8 @@ * */ -#ifndef _USB_DESCRIPTORS_H_ -#define _USB_DESCRIPTORS_H_ +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ enum { diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index b0ec60ea1..79f25bbfa 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -23,8 +23,8 @@ * */ -#ifndef _USB_DESCRIPTORS_H_ -#define _USB_DESCRIPTORS_H_ +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ //--------------------------------------------------------------------+ // UAC2 DESCRIPTOR TEMPLATES diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 279efe7b7..0e0105980 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -46,9 +46,9 @@ static void cdc_app_task(void* param); void cdc_app_init(void) { #if configSUPPORT_STATIC_ALLOCATION - xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); + (void) xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); #else - xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); + (void) xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); #endif } @@ -57,7 +57,9 @@ static size_t get_console_inputs(uint8_t *buf, size_t bufsize) { size_t count = 0; while (count < bufsize) { int ch = board_getchar(); - if (ch <= 0) break; + if (ch <= 0) { + break; + } buf[count] = (uint8_t) ch; count++; diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 476ec6733..483d9dc28 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -51,8 +51,7 @@ int sys_read(int fhdl, char *buf, size_t count) TU_ATTR_USED; int sys_write(int fhdl, const char *buf, size_t count) { (void) fhdl; - SEGGER_RTT_Write(0, buf, (int) count); - return (int) count; + return (int) SEGGER_RTT_Write(0, buf, (int) count); } int sys_read(int fhdl, char *buf, size_t count) { @@ -159,7 +158,7 @@ int board_getchar(void) { } void board_putchar(int c) { - sys_write(0, (const char*)&c, 1); + (void) sys_write(0, (const char*)&c, 1); } uint32_t tusb_time_millis_api(void) { diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 088c5fec4..606ac484f 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -165,7 +165,7 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; - const uint8_t nibble = (uint8_t) ((uid[i] >> (j * 4)) & 0xf); + const uint8_t nibble = (uint8_t) ((uid[i] >> (j * 4u)) & 0xfu); desc_str1[i * 2 + (1 - j)] = nibble_to_hex[nibble]; // UTF-16-LE } } diff --git a/src/class/cdc/cdc.h b/src/class/cdc/cdc.h index 6d207c717..679723ba6 100644 --- a/src/class/cdc/cdc.h +++ b/src/class/cdc/cdc.h @@ -192,10 +192,10 @@ typedef enum { CDC_LINE_CODING_STOP_BITS_2 = 2, // 2 bits } cdc_line_coding_stopbits_t; -#define CDC_LINE_CODING_STOP_BITS_TEXT(STOP_BITS) ( \ - STOP_BITS == CDC_LINE_CODING_STOP_BITS_1 ? "1" : \ - STOP_BITS == CDC_LINE_CODING_STOP_BITS_1_5 ? "1.5" : \ - STOP_BITS == CDC_LINE_CODING_STOP_BITS_2 ? "2" : "?" ) +#define CDC_LINE_CODING_STOP_BITS_TEXT(STOP_BITS) ( \ + (STOP_BITS) == CDC_LINE_CODING_STOP_BITS_1 ? "1" : \ + (STOP_BITS) == CDC_LINE_CODING_STOP_BITS_1_5 ? "1.5" : \ + (STOP_BITS) == CDC_LINE_CODING_STOP_BITS_2 ? "2" : "?" ) // TODO Backward compatible for typos. Maybe removed in the future release #define CDC_LINE_CONDING_STOP_BITS_1 CDC_LINE_CODING_STOP_BITS_1 @@ -211,11 +211,11 @@ typedef enum { } cdc_line_coding_parity_t; #define CDC_LINE_CODING_PARITY_CHAR(PARITY) ( \ - PARITY == CDC_LINE_CODING_PARITY_NONE ? 'N' : \ - PARITY == CDC_LINE_CODING_PARITY_ODD ? 'O' : \ - PARITY == CDC_LINE_CODING_PARITY_EVEN ? 'E' : \ - PARITY == CDC_LINE_CODING_PARITY_MARK ? 'M' : \ - PARITY == CDC_LINE_CODING_PARITY_SPACE ? 'S' : '?' ) + (PARITY) == CDC_LINE_CODING_PARITY_NONE ? 'N' : \ + (PARITY) == CDC_LINE_CODING_PARITY_ODD ? 'O' : \ + (PARITY) == CDC_LINE_CODING_PARITY_EVEN ? 'E' : \ + (PARITY) == CDC_LINE_CODING_PARITY_MARK ? 'M' : \ + (PARITY) == CDC_LINE_CODING_PARITY_SPACE ? 'S' : '?' ) //--------------------------------------------------------------------+ // Management Element Notification (Notification Endpoint) diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 087292e56..14eba86fb 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -464,7 +464,9 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm uint_fast8_t fmtnum = param->bFormatIndex; TU_ASSERT(vs && fmtnum <= vs->stm.bNumFormats); if (0 == fmtnum) { - if (1 < vs->stm.bNumFormats) return true; /* Need to negotiate all variables. */ + if (1 < vs->stm.bNumFormats) { + return true; /* Need to negotiate all variables. */ + } fmtnum = 1; param->bFormatIndex = 1; } @@ -1259,7 +1261,7 @@ bool tud_video_n_frame_xfer(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void *bu videod_streaming_interface_t *stm = _get_instance_streaming(ctl_idx, stm_idx); videod_streaming_epbuf_t *stm_epbuf = &_videod_streaming_epbuf[ctl_idx]; - if ( NULL == stm || 0 == stm->desc.ep[0] || stm->buffer) { + if (NULL == stm || 0 == stm->desc.ep[0] || stm->buffer) { return false; } if (stm->state == VS_STATE_PROBING) { diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index ac1c6457f..5f659eb95 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -111,7 +111,7 @@ extern void* tusb_app_phys_to_virt(void *phys_addr); //--------------------------------------------------------------------+ //------------- Mem -------------// -#define tu_memclr(buffer, size) memset((buffer), 0, (size)) +#define tu_memclr(buffer, size) (void) memset((buffer), 0, (size)) #define tu_varclr(_var) tu_memclr(_var, sizeof(*(_var))) // This is a backport of memset_s from c11 @@ -121,6 +121,10 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, i return -1; } + if (count == 0u) { + return 0; + } + if (count > destsz) { return -1; } @@ -131,13 +135,15 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, i // This is a backport of memcpy_s from c11 TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, const void *src, size_t count) { - // Validate parameters if (dest == NULL) { return -1; } - // For memcpy, src may be NULL only if count == 0. Reject otherwise. - if (src == NULL && count != 0u) { + if (count == 0u) { + return 0; + } + + if (src == NULL) { return -1; } @@ -230,7 +236,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_round_up(uint32_t v, uint32_t f) // TODO use clz TODO remove TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_log2(uint32_t value) { uint8_t result = 0; - while ((value >>= 1) != 0) { + while (value >>= 1) { result++; } return result; diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 49421e865..167385d13 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -77,19 +77,19 @@ /*------------------------------------------------------------------*/ /* Count number of arguments of __VA_ARGS__ * - reference www.stackoverflow.com/questions/2124339/c-preprocessor-va-args-number-of-arguments - * - _GET_NTH_ARG() takes args >= N (64) but only expand to Nth one (64th) - * - _RSEQ_N() is reverse sequential to N to add padding to have + * - TU_GET_NTH_ARG() takes args >= N (64) but only expand to Nth one (64th) + * - TU_NARG_RSEQ_N() is reverse sequential to N to add padding to have * Nth position is the same as the number of arguments * - ##__VA_ARGS__ is used to deal with 0 paramerter (swallows comma) *------------------------------------------------------------------*/ -#if !defined(__CCRX__) -#define TU_ARGS_NUM(...) _TU_NARG(_0, ##__VA_ARGS__, _RSEQ_N()) +#if defined(__CCRX__) +#define TU_ARGS_NUM(...) TU_NARG_IMPL(_0, __VA_ARGS__, TU_NARG_RSEQ_N()) #else -#define TU_ARGS_NUM(...) _TU_NARG(_0, __VA_ARGS__, _RSEQ_N()) +#define TU_ARGS_NUM(...) TU_NARG_IMPL(_0, ##__VA_ARGS__, TU_NARG_RSEQ_N()) #endif -#define _TU_NARG(...) _GET_NTH_ARG(__VA_ARGS__) -#define _GET_NTH_ARG( \ +#define TU_NARG_IMPL(...) TU_GET_NTH_ARG(__VA_ARGS__) +#define TU_GET_NTH_ARG( \ _1, _2, _3, _4, _5, _6, _7, _8, _9,_10, \ _11,_12,_13,_14,_15,_16,_17,_18,_19,_20, \ _21,_22,_23,_24,_25,_26,_27,_28,_29,_30, \ @@ -97,7 +97,7 @@ _41,_42,_43,_44,_45,_46,_47,_48,_49,_50, \ _51,_52,_53,_54,_55,_56,_57,_58,_59,_60, \ _61,_62,_63,N,...) N -#define _RSEQ_N() \ +#define TU_NARG_RSEQ_N() \ 62,61,60, \ 59,58,57,56,55,54,53,52,51,50, \ 49,48,47,46,45,44,43,42,41,40, \ diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index f7679556f..3b8920c01 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -38,14 +38,16 @@ #if OSAL_MUTEX_REQUIRED -TU_ATTR_ALWAYS_INLINE static inline void _ff_lock(osal_mutex_t mutex) -{ - if (mutex) osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER); +TU_ATTR_ALWAYS_INLINE static inline void _ff_lock(osal_mutex_t mutex) { + if (mutex) { + osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER); + } } -TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) -{ - if (mutex) osal_mutex_unlock(mutex); +TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) { + if (mutex) { + osal_mutex_unlock(mutex); + } } #else @@ -59,8 +61,7 @@ TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) * \brief Write modes intended to allow special read and write functions to be able to * copy data to and from USB hardware FIFOs as needed for e.g. STM32s and others */ -typedef enum -{ +typedef enum { TU_FIFO_COPY_INC, ///< Copy from/to an increasing source/destination address - default mode #ifdef TUP_MEM_CONST_ADDR TU_FIFO_COPY_CST_FULL_WORDS, ///< Copy from/to a constant source/destination address - required for e.g. STM32 to write into USB hardware FIFO @@ -72,7 +73,9 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si // Limit index space to 2*depth - this allows for a fast "modulo" calculation // but limits the maximum depth to 2^16/2 = 2^15 and buffer overflows are detectable // only if overflow happens once (important for unsupervised DMA applications) - if (depth > 0x8000) return false; + if (depth > 0x8000) { + return false; + } _ff_lock(f->mutex_wr); _ff_lock(f->mutex_rd); @@ -98,22 +101,19 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si // Intended to be used to read from hardware USB FIFO in e.g. STM32 where all data is read from a constant address // Code adapted from dcd_synopsys.c // TODO generalize with configurable 1 byte or 4 byte each read -static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t len) -{ +static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t len) { volatile const uint32_t * reg_rx = (volatile const uint32_t *) app_buf; // Reading full available 32 bit words from const app address uint16_t full_words = len >> 2; - while(full_words--) - { + while(full_words--) { tu_unaligned_write32(ff_buf, *reg_rx); ff_buf += 4; } // Read the remaining 1-3 bytes from const app address uint8_t const bytes_rem = len & 0x03; - if ( bytes_rem ) - { + if (bytes_rem) { uint32_t tmp32 = *reg_rx; memcpy(ff_buf, &tmp32, bytes_rem); } @@ -121,22 +121,19 @@ static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t // Intended to be used to write to hardware USB FIFO in e.g. STM32 // where all data is written to a constant address in full word copies -static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t len) -{ +static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t len) { volatile uint32_t * reg_tx = (volatile uint32_t *) app_buf; // Write full available 32 bit words to const address uint16_t full_words = len >> 2; - while(full_words--) - { + while(full_words--) { *reg_tx = tu_unaligned_read32(ff_buf); ff_buf += 4; } // Write the remaining 1-3 bytes into const address uint8_t const bytes_rem = len & 0x03; - if ( bytes_rem ) - { + if (bytes_rem) { uint32_t tmp32 = 0; memcpy(&tmp32, ff_buf, bytes_rem); @@ -146,8 +143,7 @@ static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t #endif // send one item to fifo WITHOUT updating write pointer -static inline void _ff_push(tu_fifo_t* f, void const * app_buf, uint16_t rel) -{ +static inline void _ff_push(tu_fifo_t* f, void const * app_buf, uint16_t rel) { memcpy(f->buffer + (rel * f->item_size), app_buf, f->item_size); } diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 31aca8a31..37d5e89f1 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -141,7 +141,7 @@ uint32_t tu_edpt_stream_read_xfer(uint8_t hwid, tu_edpt_stream_t* s); // Complete read transfer by writing EP -> FIFO. Must be called in the transfer complete callback TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_read_xfer_complete(tu_edpt_stream_t* s, uint32_t xferred_bytes) { - if (tu_fifo_depth(&s->ff)) { + if (0 != tu_fifo_depth(&s->ff)) { tu_fifo_write_n(&s->ff, s->ep_buf, (uint16_t) xferred_bytes); } } @@ -149,7 +149,7 @@ void tu_edpt_stream_read_xfer_complete(tu_edpt_stream_t* s, uint32_t xferred_byt // Complete read transfer with provided buffer TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_read_xfer_complete_with_buf(tu_edpt_stream_t* s, const void * buf, uint32_t xferred_bytes) { - if (tu_fifo_depth(&s->ff)) { + if (0 != tu_fifo_depth(&s->ff)) { tu_fifo_write_n(&s->ff, buf, (uint16_t) xferred_bytes); } } diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 9197381cf..a3a660d3b 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -548,7 +548,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_number(uint8_t addr) { } TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_addr(uint8_t num, uint8_t dir) { - return (uint8_t) (num | (dir ? TUSB_DIR_IN_MASK : 0)); + return (uint8_t) (num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0u)); } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_edpt_packet_size(tusb_desc_endpoint_t const* desc_ep) { diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index d6806d44a..ffd785384 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -78,7 +78,7 @@ defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) #define TU_BREAKPOINT() do { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if (0 != ((*ARM_CM_DHCSR) & 1UL)) {__asm("BKPT #0\n");} /* Only halt mcu if debugger is attached */ \ + if (0 != ((*ARM_CM_DHCSR) & 1UL)) { __asm("BKPT #0\n"); } /* Only halt mcu if debugger is attached */ \ } while(0) #elif defined(__riscv) && !TUSB_MCU_VENDOR_ESPRESSIF @@ -98,7 +98,7 @@ *------------------------------------------------------------------*/ #define TU_VERIFY_DEFINE(_cond, _ret) \ do { \ - if ( !(_cond) ) { return _ret; } \ + if (!(_cond)) { return _ret; } \ } while(0) #define TU_VERIFY_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, false) diff --git a/src/device/dcd.h b/src/device/dcd.h index 436c4555f..1b0289280 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -214,7 +214,7 @@ TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport dcd_event_t event; event.rhport = rhport; event.event_id = DCD_EVENT_SETUP_RECEIVED; - memcpy(&event.setup_received, setup, sizeof(tusb_control_request_t)); + (void) memcpy(&event.setup_received, setup, sizeof(tusb_control_request_t)); dcd_event_handler(&event, in_isr); } diff --git a/src/device/usbd.c b/src/device/usbd.c index 05fc752af..9d0bc0f3f 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -354,6 +354,8 @@ TU_ATTR_ALWAYS_INLINE static inline usbd_class_driver_t const * get_driver(uint8 driver = &_app_driver[drvid]; } else if (drvid < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0) { driver = &_usbd_driver[drvid - _app_driver_count]; + } else { + // nothing to do } return driver; } @@ -572,7 +574,7 @@ bool tud_deinit(uint8_t rhport) { // Deinit device controller driver dcd_int_disable(rhport); dcd_disconnect(rhport); - dcd_deinit(rhport); + TU_VERIFY(dcd_deinit(rhport)); // Deinit class drivers for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { @@ -594,7 +596,6 @@ bool tud_deinit(uint8_t rhport) { #endif _usbd_rhport = RHPORT_INVALID; - return true; } @@ -606,8 +607,8 @@ static void configuration_reset(uint8_t rhport) { } tu_varclr(&_usbd_dev); - memset(_usbd_dev.itf2drv, DRVID_INVALID, sizeof(_usbd_dev.itf2drv)); // invalid mapping - memset(_usbd_dev.ep2drv, DRVID_INVALID, sizeof(_usbd_dev.ep2drv)); // invalid mapping + (void) memset(_usbd_dev.itf2drv, DRVID_INVALID, sizeof(_usbd_dev.itf2drv)); // invalid mapping + (void) memset(_usbd_dev.ep2drv, DRVID_INVALID, sizeof(_usbd_dev.ep2drv)); // invalid mapping } static void usbd_reset(uint8_t rhport) { @@ -638,12 +639,16 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { (void) in_isr; // not implemented yet // Skip if stack is not initialized - if (!tud_inited()) return; + if (!tud_inited()) { + return; + } // Loop until there is no more events in the queue while (1) { dcd_event_t event; - if (!osal_queue_receive(_usbd_q, &event, timeout_ms)) return; + if (!osal_queue_receive(_usbd_q, &event, timeout_ms)) { + return; + } #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG_USBD("\r\n"); // extra line for setup @@ -667,7 +672,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { TU_ASSERT(_usbd_queued_setup > 0,); _usbd_queued_setup--; TU_LOG_BUF(CFG_TUD_LOG_LEVEL, &event.setup_received, 8); - if (_usbd_queued_setup) { + if (_usbd_queued_setup != 0) { TU_LOG_USBD(" Skipped since there is other SETUP in queue\r\n"); break; } @@ -703,8 +708,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { _usbd_dev.ep_status[epnum][ep_dir].claimed = 0; if (0 == epnum) { - usbd_control_xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, - event.xfer_complete.len); + usbd_control_xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); } else { usbd_class_driver_t const* driver = get_driver(_usbd_dev.ep2drv[epnum][ep_dir]); TU_ASSERT(driver,); @@ -738,7 +742,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { case USBD_EVENT_FUNC_CALL: TU_LOG_USBD("\r\n"); - if (event.func_call.func) { + if (event.func_call.func != NULL) { event.func_call.func(event.func_call.param); } break; @@ -792,7 +796,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const } #endif - switch ( p_request->bmRequestType_bit.recipient ) { + switch (p_request->bmRequestType_bit.recipient) { //-V2520 //------------- Device Requests e.g in enumeration -------------// case TUSB_REQ_RCPT_DEVICE: if ( TUSB_REQ_TYPE_CLASS == p_request->bmRequestType_bit.type ) { @@ -806,13 +810,13 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const return invoke_class_control(rhport, driver, p_request); } - if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) { + if (TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type) { // Non-standard request is not supported TU_BREAKPOINT(); return false; } - switch ( p_request->bRequest ) { + switch (p_request->bRequest) { //-V2520 case TUSB_REQ_SET_ADDRESS: // Depending on mcu, status phase could be sent either before or after changing device address, // or even require stack to not response with status at all @@ -834,18 +838,15 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // Only process if new configure is different if (_usbd_dev.cfg_num != cfg_num) { - if ( _usbd_dev.cfg_num ) { + if (_usbd_dev.cfg_num != 0) { // already configured: need to clear all endpoints and driver first TU_LOG_USBD(" Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num); - // disable SOF dcd_sof_enable(rhport, false); - - // close all non-control endpoints, cancel all pending transfers if any dcd_edpt_close_all(rhport); // close all drivers and current configured state except bus speed - uint8_t const speed = _usbd_dev.speed; + const uint8_t speed = _usbd_dev.speed; configuration_reset(rhport); _usbd_dev.speed = speed; // restore speed @@ -853,18 +854,15 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const _usbd_dev.cfg_num = cfg_num; - // Handle the new configuration and execute the corresponding callback - if ( cfg_num ) { - // switch to new configuration if not zero + // Handle the new configuration + if (cfg_num == 0) { + tud_umount_cb(); + } else { if (!process_set_config(rhport, cfg_num)) { - TU_MESS_FAILED(); - TU_BREAKPOINT(); _usbd_dev.cfg_num = 0; - return false; + TU_ASSERT(false); } tud_mount_cb(); - } else { - tud_umount_cb(); } } @@ -873,17 +871,17 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const break; case TUSB_REQ_GET_DESCRIPTOR: - TU_VERIFY( process_get_descriptor(rhport, p_request) ); + TU_VERIFY(process_get_descriptor(rhport, p_request)); break; case TUSB_REQ_SET_FEATURE: - switch(p_request->wValue) { + switch(p_request->wValue) { //-V2520 case TUSB_REQ_FEATURE_REMOTE_WAKEUP: TU_LOG_USBD(" Enable Remote Wakeup\r\n"); // Host may enable remote wake up before suspending especially HID device _usbd_dev.remote_wakeup_en = true; tud_control_status(rhport, p_request); - break; + break; #if CFG_TUD_TEST_MODE case TUSB_REQ_FEATURE_TEST_MODE: { @@ -897,7 +895,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const tud_control_status(rhport, p_request); break; } - #endif /* CFG_TUD_TEST_MODE */ + #endif // Stall unsupported feature selector default: return false; @@ -907,13 +905,12 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const case TUSB_REQ_CLEAR_FEATURE: // Only support remote wakeup for device feature TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue); - TU_LOG_USBD(" Disable Remote Wakeup\r\n"); // Host may disable remote wake up after resuming _usbd_dev.remote_wakeup_en = false; tud_control_status(rhport, p_request); - break; + break; case TUSB_REQ_GET_STATUS: { // Device status bit mask @@ -939,24 +936,24 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // all requests to Interface (STD or Class) is forwarded to class driver. // notable requests are: GET HID REPORT DESCRIPTOR, SET_INTERFACE, GET_INTERFACE - if ( !invoke_class_control(rhport, driver, p_request) ) { + if (!invoke_class_control(rhport, driver, p_request)) { // For GET_INTERFACE and SET_INTERFACE, it is mandatory to respond even if the class // driver doesn't use alternate settings or implement this TU_VERIFY(TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type); - switch(p_request->bRequest) { - case TUSB_REQ_GET_INTERFACE: - case TUSB_REQ_SET_INTERFACE: - // Clear complete callback if driver set since it can also stall the request. - usbd_control_set_complete_callback(NULL); + // Clear complete callback if driver set since it can also stall the request. + usbd_control_set_complete_callback(NULL); - if (TUSB_REQ_GET_INTERFACE == p_request->bRequest) { - uint8_t alternate = 0; - tud_control_xfer(rhport, p_request, &alternate, 1); - }else { - tud_control_status(rhport, p_request); - } - break; + switch (p_request->bRequest) { //-V2520 + case TUSB_REQ_GET_INTERFACE: { + uint8_t alternate = 0; + tud_control_xfer(rhport, p_request, &alternate, 1); + break; + } + + case TUSB_REQ_SET_INTERFACE: + tud_control_status(rhport, p_request); + break; default: return false; } @@ -973,15 +970,15 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const TU_ASSERT(ep_num < TU_ARRAY_SIZE(_usbd_dev.ep2drv) ); usbd_class_driver_t const * driver = get_driver(_usbd_dev.ep2drv[ep_num][ep_dir]); - if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) { + if (TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type) { // Forward class request to its driver TU_VERIFY(driver); return invoke_class_control(rhport, driver, p_request); } else { // Handle STD request to endpoint - switch ( p_request->bRequest ) { + switch (p_request->bRequest) { //-V2520 case TUSB_REQ_GET_STATUS: { - uint16_t status = usbd_edpt_stalled(rhport, ep_addr) ? 0x0001 : 0x0000; + uint16_t status = usbd_edpt_stalled(rhport, ep_addr) ? 0x0001u : 0x0000u; tud_control_xfer(rhport, p_request, &status, 2); } break; @@ -996,7 +993,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const } } - if (driver) { + if (driver != NULL) { // Some classes such as USBTMC needs to clear/re-init its buffer when receiving CLEAR_FEATURE request // We will also forward std request targeted endpoint to class drivers as well @@ -1006,7 +1003,9 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const usbd_control_set_complete_callback(NULL); // skip ZLP status if driver already did that - if ( !_usbd_dev.ep_status[0][TUSB_DIR_IN].busy ) tud_control_status(rhport, p_request); + if (!_usbd_dev.ep_status[0][TUSB_DIR_IN].busy) { + tud_control_status(rhport, p_request); + } } } break; @@ -1017,8 +1016,8 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const return false; } } + break; } - break; // Unknown recipient default: @@ -1081,10 +1080,11 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) // Some drivers use 2 or more interfaces but may not have IAD e.g MIDI (always) or // BTH (even CDC) with class in device descriptor (single interface) - if ( assoc_itf_count == 1) - { + if (assoc_itf_count == 1) { #if CFG_TUD_CDC - if ( driver->open == cdcd_open ) assoc_itf_count = 2; + if ( driver->open == cdcd_open ) { + assoc_itf_count = 2; + } #endif #if CFG_TUD_MIDI @@ -1158,8 +1158,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const tusb_desc_type_t const desc_type = (tusb_desc_type_t) tu_u16_high(p_request->wValue); uint8_t const desc_index = tu_u16_low( p_request->wValue ); - switch(desc_type) - { + switch(desc_type) { //-V2520 case TUSB_DESC_DEVICE: { TU_LOG_USBD(" Device\r\n"); @@ -1187,7 +1186,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const // requested by host if USB > 2.0 ( i.e 2.1 or 3.x ) uintptr_t desc_bos = (uintptr_t) tud_descriptor_bos_cb(); - TU_VERIFY(desc_bos); + TU_VERIFY(desc_bos != 0); // Use offsetof to avoid pointer to the odd/misaligned address uint16_t const total_len = tu_le16toh( tu_unaligned_read16((const void*) (desc_bos + offsetof(tusb_desc_bos_t, wTotalLength))) ); @@ -1203,12 +1202,12 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const if ( desc_type == TUSB_DESC_CONFIGURATION ) { TU_LOG_USBD(" Configuration[%u]\r\n", desc_index); desc_config = (uintptr_t) tud_descriptor_configuration_cb(desc_index); - TU_ASSERT(desc_config); + TU_ASSERT(desc_config != 0); }else { // Host only request this after getting Device Qualifier descriptor TU_LOG_USBD(" Other Speed Configuration\r\n"); desc_config = (uintptr_t) tud_descriptor_other_speed_configuration_cb(desc_index); - TU_VERIFY(desc_config); + TU_VERIFY(desc_config != 0); } // Use offsetof to avoid pointer to the odd/misaligned address @@ -1218,8 +1217,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const } // break; // unreachable - case TUSB_DESC_STRING: - { + case TUSB_DESC_STRING: { TU_LOG_USBD(" String[%u]\r\n", desc_index); // String Descriptor always uses the desc set from user diff --git a/src/device/usbd.h b/src/device/usbd.h index bfff23399..c446638c3 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -95,7 +95,9 @@ bool tud_suspended(void); // Check if device is ready to transfer TU_ATTR_ALWAYS_INLINE static inline bool tud_ready(void) { - return tud_mounted() && !tud_suspended(); + const bool is_mounted = tud_mounted(); + const bool is_suspended = tud_suspended(); + return is_mounted && !is_suspended; } // Remote wake up host, only if suspended and enabled by host @@ -421,7 +423,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ TUD_AUDIO10_DESC_SELECTOR_UNIT_ONE_PIN_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT, _unitid, 1, _srcid, _stridx /* Feature Unit Descriptor UAC1 (4.3.2.5) - Variable Channels */ -#define TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(_nchannels) (7 + (_nchannels + 1) * 2) +#define TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(_nchannels) (7 + ((_nchannels) + 1) * 2) // Feature Unit descriptor, take list of control bitmaps for master channel + each channel as variable arguments #define TUD_AUDIO10_DESC_FEATURE_UNIT(_unitid, _srcid, _stridx, ...) \ TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(TU_ARGS_NUM(__VA_ARGS__) - 1), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, 2, TU_ARGS_APPLY_EXPAND(U16_TO_U8S_LE, __VA_ARGS__), _stridx @@ -539,7 +541,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ TUD_AUDIO20_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _clkid, U16_TO_U8S_LE(_ctrl), _stridx /* Feature Unit Descriptor(4.7.2.8) */ -#define TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(_nchannels) (6 + (_nchannels + 1) * 4) +#define TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(_nchannels) (6 + ((_nchannels) + 1) * 4) #define TUD_AUDIO20_DESC_FEATURE_UNIT(_unitid, _srcid, _stridx, ...) \ TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(TU_ARGS_NUM(__VA_ARGS__) - 1), TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, TU_ARGS_APPLY_EXPAND(U32_TO_U8S_LE, __VA_ARGS__), _stridx @@ -728,7 +730,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ // Calculate wMaxPacketSize of Endpoints #define TUD_AUDIO_EP_SIZE(_is_highspeed, _maxFrequency, _nBytesPerSample, _nChannels) \ - ((((_maxFrequency + (_is_highspeed ? 7999 : 999)) / (_is_highspeed ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels) + (((((_maxFrequency) + ((_is_highspeed) ? 7999 : 999)) / ((_is_highspeed) ? 8000 : 1000)) + 1) * (_nBytesPerSample) * (_nChannels)) //--------------------------------------------------------------------+ @@ -807,44 +809,44 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ // Interface number, Alternate count, starting string index, attributes, detach timeout, transfer size // Note: Alternate count must be numeric or macro, string index is increased by one for each Alt interface #define TUD_DFU_DESCRIPTOR(_itfnum, _alt_count, _stridx, _attr, _timeout, _xfer_size) \ - TU_XSTRCAT(_TUD_DFU_ALT_,_alt_count)(_itfnum, 0, _stridx), \ + TU_XSTRCAT(TUD_DFU_ALT_,_alt_count)(_itfnum, 0, _stridx), \ /* Function */ \ 9, DFU_DESC_FUNCTIONAL, _attr, U16_TO_U8S_LE(_timeout), U16_TO_U8S_LE(_xfer_size), U16_TO_U8S_LE(0x0101) -#define _TUD_DFU_ALT(_itfnum, _alt, _stridx) \ +#define TUD_DFU_ALT(_itfnum, _alt, _stridx) \ /* Interface */ \ 9, TUSB_DESC_INTERFACE, _itfnum, _alt, 0, TUD_DFU_APP_CLASS, TUD_DFU_APP_SUBCLASS, DFU_PROTOCOL_DFU, _stridx -#define _TUD_DFU_ALT_1(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx) +#define TUD_DFU_ALT_1(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx) -#define _TUD_DFU_ALT_2(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_1(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_2(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_1(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_3(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_2(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_3(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_2(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_4(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_3(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_4(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_3(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_5(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_4(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_5(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_4(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_6(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_5(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_6(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_5(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_7(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_6(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_7(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_6(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_8(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_7(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_8(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_7(_itfnum, _alt_count+1, _stridx+1) //--------------------------------------------------------------------+ // CDC-ECM Descriptor Templates diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index a688cf497..2894d3023 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -117,7 +117,9 @@ bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endp // Check if endpoint is ready (not busy and not stalled) TU_ATTR_ALWAYS_INLINE static inline bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr) { - return !usbd_edpt_busy(rhport, ep_addr) && !usbd_edpt_stalled(rhport, ep_addr); + const bool is_busy = usbd_edpt_busy(rhport, ep_addr); + const bool is_stalled = usbd_edpt_stalled(rhport, ep_addr); + return !is_busy && !is_stalled; } // Enable SOF interrupt diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 1b43b9ac4..b2531426a 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -85,6 +85,12 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t dwc2_ep_count(const dwc2_regs_t* dwc #endif } +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ +TU_ATTR_ALWAYS_INLINE static inline bool edpt_is_enabled(dwc2_dep_t* dep) { + return (dep->ctl & EPCTL_EPENA) != 0; +} //-------------------------------------------------------------------- // DMA @@ -117,7 +123,7 @@ static void dma_setup_prepare(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); if (dwc2->gsnpsid >= DWC2_CORE_REV_3_00a) { - if(dwc2->epout[0].doepctl & DOEPCTL_EPENA) { + if(edpt_is_enabled(&dwc2->epout[0])) { return; } } @@ -200,7 +206,7 @@ static bool dfifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { } } else { // Check IN endpoints concurrently active limit - if(dwc2_controller->ep_in_count) { + if(0 != dwc2_controller->ep_in_count) { TU_ASSERT(_dcd_data.allocated_epin_count < dwc2_controller->ep_in_count); _dcd_data.allocated_epin_count++; } @@ -217,10 +223,10 @@ static bool dfifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { // Both TXFD and TXSA are in unit of 32-bit words. if (epnum == 0) { - dwc2->dieptxf0 = (fifo_size << DIEPTXF0_TX0FD_Pos) | _dcd_data.dfifo_top; + dwc2->dieptxf0 = ((uint32_t) fifo_size << DIEPTXF0_TX0FD_Pos) | _dcd_data.dfifo_top; } else { // DIEPTXF starts at FIFO #1. - dwc2->dieptxf[epnum - 1] = (fifo_size << DIEPTXF_INEPTXFD_Pos) | _dcd_data.dfifo_top; + dwc2->dieptxf[epnum - 1] = ((uint32_t) fifo_size << DIEPTXF_INEPTXFD_Pos) | _dcd_data.dfifo_top; } } @@ -238,10 +244,10 @@ static void dfifo_device_init(uint8_t rhport) { if (is_dma) { _dcd_data.dfifo_top -= 2 * dwc2_controller->ep_count; } - dwc2->gdfifocfg = (_dcd_data.dfifo_top << GDFIFOCFG_EPINFOBASE_SHIFT) | _dcd_data.dfifo_top; + dwc2->gdfifocfg = ((uint32_t) _dcd_data.dfifo_top << GDFIFOCFG_EPINFOBASE_SHIFT) | _dcd_data.dfifo_top; // Allocate FIFO for EP0 IN - dfifo_alloc(rhport, 0x80, CFG_TUD_ENDPOINT0_SIZE); + (void) dfifo_alloc(rhport, 0x80, CFG_TUD_ENDPOINT0_SIZE); } @@ -282,16 +288,18 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { const uint8_t dir = tu_edpt_dir(ep_addr); dwc2_dep_t* dep = &dwc2->ep[dir == TUSB_DIR_IN ? 0 : 1][epnum]; + const uint32_t stall_mask = (stall ? EPCTL_STALL : 0); + if (dir == TUSB_DIR_IN) { - if (!(dep->diepctl & DIEPCTL_EPENA)) { - dep->diepctl |= DIEPCTL_SNAK | (stall ? DIEPCTL_STALL : 0); + if (!edpt_is_enabled(dep)) { + dep->diepctl |= DIEPCTL_SNAK | stall_mask; } else { // Stop transmitting packets and NAK IN xfers. dep->diepctl |= DIEPCTL_SNAK; while ((dep->diepint & DIEPINT_INEPNE) == 0) {} // Disable the endpoint. - dep->diepctl |= DIEPCTL_EPDIS | (stall ? DIEPCTL_STALL : 0); + dep->diepctl |= DIEPCTL_EPDIS | stall_mask; while ((dep->diepint & DIEPINT_EPDISD_Msk) == 0) {} dep->diepint = DIEPINT_EPDISD; @@ -300,9 +308,10 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { // Flush the FIFO, and wait until we have confirmed it cleared. dfifo_flush_tx(dwc2, epnum); } else { - // Only disable currently enabled non-control endpoint - if ((epnum == 0) || !(dep->doepctl & DOEPCTL_EPENA)) { - dep->doepctl |= stall ? DOEPCTL_STALL : 0; + if (!edpt_is_enabled(dep) || epnum == 0) { + // non-control not-enabled: stall if set + // For EP0 Out, keep it enabled to receive SETUP packets + dep->doepctl |= stall_mask; } else { // Asserting GONAK is required to STALL an OUT endpoint. // Simpler to use polling here, we don't use the "B"OUTNAKEFF interrupt @@ -312,7 +321,7 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { while ((dwc2->gintsts & GINTSTS_BOUTNAKEFF_Msk) == 0) {} // Ditto here disable the endpoint. - dep->doepctl |= DOEPCTL_EPDIS | (stall ? DOEPCTL_STALL : 0); + dep->doepctl |= DOEPCTL_EPDIS | stall_mask; while ((dep->doepint & DOEPINT_EPDISD_Msk) == 0) {} dep->doepint = DOEPINT_EPDISD; @@ -360,7 +369,7 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin if (depctl.type == DEPCTL_EPTYPE_ISOCHRONOUS && xfer->interval == 1) { const dwc2_dsts_t dsts = {.value = dwc2->dsts}; const uint32_t odd_now = dsts.frame_number & 1u; - if (odd_now) { + if (odd_now != 0) { depctl.set_data0_iso_even = 1; } else { depctl.set_data1_iso_odd = 1; @@ -379,7 +388,7 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin // Enable tx fifo empty interrupt only if there is data. Note must after depctl enable if (dir == TUSB_DIR_IN && total_bytes != 0) { - dwc2->diepempmsk |= (1u << epnum); + dwc2->diepempmsk |= (1u << epnum); //-V629 } } } @@ -551,7 +560,7 @@ void dcd_edpt_close_all(uint8_t rhport) { for (uint8_t n = 1; n < ep_count; n++) { for (uint8_t d = 0; d < 2; d++) { dwc2_dep_t* dep = &dwc2->ep[d][n]; - if (dep->ctl & EPCTL_EPENA) { + if (edpt_is_enabled(dep)) { dep->ctl |= EPCTL_SNAK | EPCTL_EPDIS; } xfer_status[n][1-d].max_size = 0; @@ -643,8 +652,12 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); edpt_disable(rhport, ep_addr, true); - if((tu_edpt_number(ep_addr) == 0) && dma_device_enabled(dwc2)) { - dma_setup_prepare(rhport); + + // For control endpoint, prepare to receive SETUP packet + if (tu_edpt_number(ep_addr) == 0) { + if (dma_device_enabled(dwc2)) { + dma_setup_prepare(rhport); + } } } @@ -681,8 +694,9 @@ static void handle_bus_reset(uint8_t rhport) { // Disable all IN endpoints for (uint8_t n = 0; n < ep_count; n++) { - if (dwc2->epin[n].diepctl & DIEPCTL_EPENA) { - dwc2->epin[n].diepctl |= DIEPCTL_SNAK | DIEPCTL_EPDIS; + dwc2_dep_t* dep = &dwc2->epin[n]; + if (edpt_is_enabled(dep)) { + dep->diepctl |= DIEPCTL_SNAK | DIEPCTL_EPDIS; } } @@ -807,9 +821,9 @@ static void handle_rxflvl_irq(uint8_t rhport) { const uint16_t byte_count = grxstsp.byte_count; xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); - if (byte_count) { + if (byte_count != 0) { // Read packet off RxFIFO - if (xfer->ff) { + if (xfer->ff != NULL) { tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void*) (uintptr_t) rx_fifo, byte_count); } else { dfifo_read_packet(dwc2, xfer->buffer, byte_count); @@ -836,7 +850,7 @@ static void handle_rxflvl_irq(uint8_t rhport) { // the specified OUT endpoint which will be handled by handle_epout_irq() break; - default: break; + default: break; // nothing to do } } @@ -844,7 +858,7 @@ static void handle_epout_slave(uint8_t rhport, uint8_t epnum, dwc2_doepint_t doe if (doepint_bm.setup_phase_done) { // Cleanup previous pending EP0 IN transfer if any dwc2_dep_t* epin0 = &DWC2_REG(rhport)->epin[0]; - if (epin0->diepctl & DIEPCTL_EPENA) { + if (edpt_is_enabled(epin0)) { edpt_disable(rhport, 0x80, false); } dcd_event_setup_received(rhport, _dcd_usbbuf.setup_packet, true); @@ -858,7 +872,6 @@ static void handle_epout_slave(uint8_t rhport, uint8_t epnum, dwc2_doepint_t doe // can is set when GRXSTS_PKTSTS_SETUP_RX is popped therefore they can bet set before/together with setup_phase_done if (!doepint_bm.status_phase_rx && !doepint_bm.setup_packet_rx) { xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); - if ((epnum == 0) && _dcd_data.ep0_pending[TUSB_DIR_OUT]) { // EP0 can only handle one packet, Schedule another packet to be received. edpt_schedule_packets(rhport, epnum, TUSB_DIR_OUT); @@ -875,7 +888,7 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_IN); if (diepint_bm.xfer_complete) { - if ((epnum == 0) && _dcd_data.ep0_pending[TUSB_DIR_IN]) { + if ((epnum == 0) && (0 != _dcd_data.ep0_pending[TUSB_DIR_IN])) { // EP0 can only handle one packet. Schedule another packet to be transmitted. edpt_schedule_packets(rhport, epnum, TUSB_DIR_IN); } else { @@ -886,7 +899,7 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep // TX FIFO empty bit is read-only. It will only be cleared by hardware when written bytes is more than // - 64 bytes or // - Half/Empty of TX FIFO size (configured by GAHBCFG.TXFELVL) - if (diepint_bm.txfifo_empty && (dwc2->diepempmsk & (1 << epnum))) { + if (diepint_bm.txfifo_empty && tu_bit_test(dwc2->diepempmsk, epnum)) { dwc2_ep_tsize_t tsiz = {.value = epin->tsiz}; const uint16_t remain_packets = tsiz.packet_count; @@ -902,7 +915,7 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep } // Push packet to Tx-FIFO - if (xfer->ff) { + if (xfer->ff != NULL) { volatile uint32_t* tx_fifo = dwc2->fifo[epnum]; tu_fifo_read_n_const_addr_full_words(xfer->ff, (void*)(uintptr_t)tx_fifo, xact_bytes); } else { @@ -927,7 +940,7 @@ static void handle_epout_dma(uint8_t rhport, uint8_t epnum, dwc2_doepint_t doepi if (doepint_bm.setup_phase_done) { // Cleanup previous pending EP0 IN transfer if any dwc2_dep_t* epin0 = &DWC2_REG(rhport)->epin[0]; - if (epin0->diepctl & DIEPCTL_EPENA) { + if (edpt_is_enabled(epin0)) { edpt_disable(rhport, 0x80, false); } dma_setup_prepare(rhport); @@ -993,7 +1006,7 @@ static void handle_ep_irq(uint8_t rhport, uint8_t dir) { // DAINT for a given EP clears when DEPINTx is cleared. // EPINT will be cleared when DAINT bits are cleared. for (uint8_t epnum = 0; epnum < ep_count; epnum++) { - if (dwc2->daint & TU_BIT(daint_offset + epnum)) { + if (tu_bit_test(dwc2->daint,daint_offset + epnum)) { dwc2_dep_t* epout = &ep_base[epnum]; union { uint32_t value; @@ -1002,7 +1015,7 @@ static void handle_ep_irq(uint8_t rhport, uint8_t dir) { } intr; intr.value = epout->intr; - epout->intr = intr.value; // Clear interrupt + epout->intr = intr.value; // Clear interrupt //-V::2584::{otg_int} if (is_dma) { #if CFG_TUD_DWC2_DMA_ENABLE @@ -1037,6 +1050,7 @@ static void handle_ep_irq(uint8_t rhport, uint8_t dir) { Note: when OTG_MULTI_PROC_INTRPT = 1, Device Each endpoint interrupt deachint/deachmsk/diepeachmsk/doepeachmsk are combined to generate dedicated interrupt line for each endpoint. */ +//-V::2584::{gintsts} PVS-Studio suppression void dcd_int_handler(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); const uint32_t gintmask = dwc2->gintmsk; diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 08950ccc0..9da8de41f 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -176,7 +176,9 @@ TU_ATTR_ALWAYS_INLINE static inline void dwc2_int_set(uint8_t rhport, tusb_role_ TU_ATTR_ALWAYS_INLINE static inline void dwc2_remote_wakeup_delay(void) { // try to delay for 1 ms uint32_t count = SystemCoreClock / 1000; - while (count--) __NOP(); + while (count--) { + __NOP(); + } } // MCU specific PHY init, called BEFORE core reset diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index 75643529f..adcc579e3 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -1435,7 +1435,7 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define DAINTMSK_OEPM_Msk (0xFFFFUL << DAINTMSK_OEPM_Pos) // 0xFFFF0000 #define DAINTMSK_OEPM DAINTMSK_OEPM_Msk // OUT EP interrupt mask bits -#define DAINT_SHIFT(_dir) ((_dir == TUSB_DIR_IN) ? 0 : 16) +#define DAINT_SHIFT(_dir) (((_dir) == TUSB_DIR_IN) ? 0 : 16) #if 0 /******************** Bit definition for OTG register ********************/ -- cgit v1.3.1 From 1f04fe7924e8777c1583323171c0e1cabcb29062 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 5 Nov 2025 15:31:02 +0700 Subject: added .clang-format fix more alerts disable IAR CStat since pvs-studio check is better integrated with clion --- .PVS-Studio/.pvsconfig | 13 +- .clang-format | 102 ++++++---- .github/workflows/static_analysis.yml | 3 +- README.rst | 6 +- examples/device/audio_4_channel_mic/src/main.c | 8 +- .../src/usb_descriptors.c | 8 +- examples/device/audio_test/src/main.c | 8 +- examples/device/audio_test/src/usb_descriptors.c | 8 +- .../audio_test_freertos/src/usb_descriptors.c | 8 +- examples/device/audio_test_multi_rate/src/main.c | 8 +- .../audio_test_multi_rate/src/usb_descriptors.c | 8 +- examples/device/cdc_dual_ports/src/main.c | 12 +- examples/device/cdc_msc/src/msc_disk.c | 28 ++- examples/device/cdc_uac2/src/uac2_app.c | 28 +-- examples/device/cdc_uac2/src/usb_descriptors.c | 8 +- examples/device/dfu/src/usb_descriptors.c | 8 +- examples/device/dfu_runtime/src/main.c | 4 +- examples/device/dfu_runtime/src/usb_descriptors.c | 8 +- examples/device/dynamic_configuration/src/main.c | 56 +++--- .../device/dynamic_configuration/src/msc_disk.c | 14 +- .../dynamic_configuration/src/usb_descriptors.c | 8 +- examples/device/hid_boot_interface/src/main.c | 147 +++++++------- .../hid_boot_interface/src/usb_descriptors.c | 124 ++++++------ examples/device/hid_composite/src/main.c | 211 ++++++++++----------- examples/device/mtp/src/mtp_fs_example.c | 90 +++++---- hw/bsp/family_support.cmake | 8 +- src/class/mtp/mtp.h | 14 +- src/class/mtp/mtp_device.h | 10 +- src/class/video/video.h | 10 +- src/common/tusb_common.h | 7 +- src/common/tusb_debug.h | 4 +- src/device/usbd_control.c | 6 +- src/device/usbd_pvt.h | 5 - src/tusb.c | 4 +- 34 files changed, 523 insertions(+), 471 deletions(-) diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index 32125c2f7..2e231c939 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -1,3 +1,10 @@ -//-V::2506 -//-V::2514 -//-V::2614 +//V_EXCLUDE_PATH */iar/cxarm* +//V_EXCLUDE_PATH */pico-sdk/* + +//-V::2506 MISRA. A function should have a single point of exit at the end. +//-V::2514 MISRA. Unions should not be used. +//-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. +//-V:printf:2547 [MISRA-C-17.7] The return value of non-void function 'printf' should be used. +//-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. +//+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES +//-V:memcpy:2628 Pointer arguments to the 'memcpy' function should be pointers to qualified or unqualified versions of compatible types. diff --git a/.clang-format b/.clang-format index 0fd168e5a..79a160a8d 100644 --- a/.clang-format +++ b/.clang-format @@ -1,66 +1,88 @@ -# Generated from CLion C/C++ Code Style settings +--- +Language: Cpp BasedOnStyle: LLVM -AccessModifierOffset: -2 -AlignAfterOpenBracket: Align -AlignConsecutiveAssignments: None -AlignOperands: Align +AlignAfterOpenBracket: AlwaysBreak +AlignConsecutiveAssignments: + Enabled: true + AcrossEmptyLines: false + AcrossComments: false +AlignConsecutiveBitFields: + Enabled: true + AcrossEmptyLines: false + AcrossComments: false +AlignConsecutiveDeclarations: + Enabled: true + AcrossEmptyLines: false + AcrossComments: false +AlignConsecutiveMacros: + Enabled: true + AcrossEmptyLines: true + AcrossComments: false +AlignConsecutiveShortCaseStatements: + Enabled: true + AcrossEmptyLines: true + AcrossComments: true + AlignCaseColons: false +AlignEscapedNewlines: LeftWithLastLine +AlignOperands: true +AlignTrailingComments: + Kind: Always + OverEmptyLines: 2 AllowAllArgumentsOnNextLine: false AllowAllConstructorInitializersOnNextLine: false AllowAllParametersOfDeclarationOnNextLine: false -AllowShortBlocksOnASingleLine: Always -AllowShortCaseLabelsOnASingleLine: false -AllowShortFunctionsOnASingleLine: All -AllowShortIfStatementsOnASingleLine: Always -AllowShortLambdasOnASingleLine: All -AllowShortLoopsOnASingleLine: true -AlwaysBreakAfterReturnType: None +AllowShortBlocksOnASingleLine: Empty +AllowShortCaseExpressionOnASingleLine: true +AllowShortCaseLabelsOnASingleLine: true +AllowShortFunctionsOnASingleLine: None +AllowShortIfStatementsOnASingleLine: Never AlwaysBreakTemplateDeclarations: Yes BreakBeforeBraces: Custom BraceWrapping: AfterCaseLabel: false AfterClass: false - AfterControlStatement: Never + AfterControlStatement: false AfterEnum: false AfterFunction: false AfterNamespace: false + AfterStruct: false AfterUnion: false - BeforeCatch: false + AfterExternBlock: false + BeforeCatch: true BeforeElse: false - IndentBraces: false - SplitEmptyFunction: false + BeforeLambdaBody: false + BeforeWhile: false + SplitEmptyFunction: true SplitEmptyRecord: true -BreakBeforeBinaryOperators: None -BreakBeforeTernaryOperators: true -BreakConstructorInitializers: BeforeColon -BreakInheritanceList: BeforeColon -ColumnLimit: 0 -CompactNamespaces: false -ContinuationIndentWidth: 4 + SplitEmptyNamespace: true +BracedInitializerIndentWidth: 2 +BreakConstructorInitializers: AfterColon +BreakConstructorInitializersBeforeComma: false +ColumnLimit: 120 +ConstructorInitializerAllOnOneLineOrOnePerLine: false +Cpp11BracedListStyle: true +IncludeCategories: + - Regex: '^<.*' + Priority: 1 + - Regex: '^".*' + Priority: 2 + - Regex: '.*' + Priority: 3 +IncludeIsMainRegex: '([-_](test|unittest))?$' +InsertBraces: true IndentCaseLabels: true -IndentPPDirectives: BeforeHash -IndentWidth: 2 -KeepEmptyLinesAtTheStartOfBlocks: true +InsertNewlineAtEOF: true +MacroBlockBegin: '' +MacroBlockEnd: '' MaxEmptyLinesToKeep: 2 NamespaceIndentation: All -ObjCSpaceAfterProperty: false -ObjCSpaceBeforeProtocolList: true -PointerAlignment: Right ReflowComments: false -SpaceAfterCStyleCast: true -SpaceAfterLogicalNot: false SpaceAfterTemplateKeyword: false -SpaceBeforeAssignmentOperators: true -SpaceBeforeCpp11BracedList: false -SpaceBeforeCtorInitializerColon: true -SpaceBeforeInheritanceColon: true -SpaceBeforeParens: ControlStatements SpaceBeforeRangeBasedForLoopColon: false SpaceInEmptyParentheses: false -SpacesBeforeTrailingComments: 0 SpacesInAngles: false +SpacesInConditionalStatement: false SpacesInCStyleCastParentheses: false -SpacesInContainerLiterals: true SpacesInParentheses: false -SpacesInSquareBrackets: false TabWidth: 2 -UseTab: Never +... diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 7e74f77ce..227f5e103 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -183,7 +183,8 @@ jobs: --define sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json IAR-CStat: - if: github.repository_owner == 'hathach' + #if: github.repository_owner == 'hathach' + if: false runs-on: ubuntu-latest strategy: fail-fast: false diff --git a/README.rst b/README.rst index 38ebcc8da..fcec5d613 100644 --- a/README.rst +++ b/README.rst @@ -1,4 +1,4 @@ -|Build Status| |CircleCI Status| |Documentation Status| |Fuzzing Status| |License| +|Build Status| |CircleCI Status| |Documentation Status| |Static Analysis| |Fuzzing Status| |License| Sponsors ======== @@ -252,11 +252,13 @@ The following tools are provided freely to support the development of the TinyUS .. |Build Status| image:: https://github.com/hathach/tinyusb/actions/workflows/build.yml/badge.svg - :target: https://github.com/hathach/tinyusb/actions + :target: https://github.com/hathach/tinyusb/actions/workflows/build.yml .. |CircleCI Status| image:: https://dl.circleci.com/status-badge/img/circleci/4AYHvUhFxdnY4rA7LEsdqW/QmrpoL2AjGqetvFQNqtWyq/tree/master.svg?style=svg :target: https://dl.circleci.com/status-badge/redirect/circleci/4AYHvUhFxdnY4rA7LEsdqW/QmrpoL2AjGqetvFQNqtWyq/tree/master .. |Documentation Status| image:: https://readthedocs.org/projects/tinyusb/badge/?version=latest :target: https://docs.tinyusb.org/en/latest/?badge=latest +.. |Static Analysis| image:: https://github.com/hathach/tinyusb/actions/workflows/static_analysis.yml/badge.svg + :target: https://github.com/hathach/tinyusb/actions/workflows/static_analysis.yml .. |Fuzzing Status| image:: https://oss-fuzz-build-logs.storage.googleapis.com/badges/tinyusb.svg :target: https://oss-fuzz-build-logs.storage.googleapis.com/index.html#tinyusb .. |License| image:: https://img.shields.io/badge/license-MIT-brightgreen.svg diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index de9e8a06a..5767c7453 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -156,7 +156,9 @@ void tud_resume_cb(void) { void audio_task(void) { static uint32_t start_ms = 0; uint32_t curr_ms = board_millis(); - if (start_ms == curr_ms) return;// not enough time + if (start_ms == curr_ms) { + return; // not enough time + } start_ms = curr_ms; tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE / 1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX); } @@ -406,7 +408,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return;// not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c index 2f5f67f66..3bb93f67d 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c @@ -156,14 +156,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if ( chr_count > max_count ) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index 875d0b7f0..2441eefbc 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -139,7 +139,9 @@ void tud_resume_cb(void) { void audio_task(void) { static uint32_t start_ms = 0; uint32_t curr_ms = board_millis(); - if (start_ms == curr_ms) return;// not enough time + if (start_ms == curr_ms) { + return; // not enough time + } start_ms = curr_ms; for (size_t cnt = 0; cnt < sizeof(test_buffer_audio) / 2; cnt++) { test_buffer_audio[cnt] = startVal++; @@ -400,7 +402,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return;// not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index b6c19deba..ad161939e 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -158,14 +158,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/audio_test_freertos/src/usb_descriptors.c b/examples/device/audio_test_freertos/src/usb_descriptors.c index b6c19deba..ad161939e 100644 --- a/examples/device/audio_test_freertos/src/usb_descriptors.c +++ b/examples/device/audio_test_freertos/src/usb_descriptors.c @@ -158,14 +158,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 55a649613..baeec870f 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -147,7 +147,9 @@ void tud_resume_cb(void) { void audio_task(void) { static uint32_t start_ms = 0; uint32_t curr_ms = board_millis(); - if (start_ms == curr_ms) return;// not enough time + if (start_ms == curr_ms) { + return; // not enough time + } start_ms = curr_ms; // 16bit if (bytesPerSample == 2) { @@ -612,7 +614,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return;// not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index 1912a81e2..471eb4f2e 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -213,14 +213,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 8fe003f21..5ccb06a8a 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -75,10 +75,14 @@ static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count) { for (uint32_t i = 0; i < count; i++) { if (itf == 0) { // echo back 1st port as lower case - if (isupper(buf[i])) buf[i] += case_diff; + if (isupper(buf[i])) { + buf[i] += case_diff; + } } else { // echo back 2nd port as upper case - if (islower(buf[i])) buf[i] -= case_diff; + if (islower(buf[i])) { + buf[i] -= case_diff; + } } tud_cdc_n_write_char(itf, buf[i]); @@ -153,7 +157,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 1a95f7f8b..e091c2985 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -128,9 +128,9 @@ uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uin const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - strncpy((char*) inquiry_resp->vendor_id, vid, 8); - strncpy((char*) inquiry_resp->product_id, pid, 16); - strncpy((char*) inquiry_resp->product_rev, rev, 4); + (void) strncpy((char*) inquiry_resp->vendor_id, vid, 8); + (void) strncpy((char*) inquiry_resp->product_id, pid, 16); + (void) strncpy((char*) inquiry_resp->product_rev, rev, 4); return sizeof(scsi_inquiry_resp_t); // 36 bytes } @@ -143,8 +143,7 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun) { // RAM disk is ready until ejected if (ejected) { // Additional Sense 3A-00 is NOT_FOUND - tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3a, 0x00); - return false; + return tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3a, 0x00); } return true; @@ -154,7 +153,6 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun) { // Application update block count and block size void tud_msc_capacity_cb(uint8_t lun, uint32_t *block_count, uint16_t *block_size) { (void) lun; - *block_count = DISK_BLOCK_NUM; *block_size = DISK_BLOCK_SIZE; } @@ -194,7 +192,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void *buff } uint8_t const *addr = msc_disk[lba] + offset; - memcpy(buffer, addr, bufsize); + (void) memcpy(buffer, addr, bufsize); return (int32_t) bufsize; } @@ -221,7 +219,7 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t * #ifndef CFG_EXAMPLE_MSC_READONLY uint8_t *addr = msc_disk[lba] + offset; - memcpy(addr, buffer, bufsize); + (void) memcpy(addr, buffer, bufsize); #else (void) lba; (void) offset; @@ -235,19 +233,17 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t * // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, uint16_t bufsize) { + (void) lun; + (void) scsi_cmd; (void) buffer; (void) bufsize; - switch (scsi_cmd[0]) { - default: - // Set Sense = Invalid Command Operation - tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + // currently no other commands is supported - // negative means error -> tinyusb could stall and/or response with failed status - return -1; - } + // Set Sense = Invalid Command Operation + (void) tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); - return -1; + return -1; // stall/failed command request; } #endif diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index cb7b716e8..73a262d0c 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -67,7 +67,9 @@ uint8_t current_resolution; void audio_task(void) { static uint32_t start_ms = 0; uint32_t curr_ms = board_millis(); - if (start_ms == curr_ms) return;// not enough time + if (start_ms == curr_ms) { + return; // not enough time + } start_ms = curr_ms; // When new data arrived, copy data from speaker buffer, to microphone buffer // and send it over @@ -226,16 +228,15 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_r //--------------------------------------------------------------------+ // Invoked when audio class specific get request received for an entity -bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) -{ +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { audio20_control_request_t const *request = (audio20_control_request_t const *)p_request; - if (request->bEntityID == UAC2_ENTITY_CLOCK) + if (request->bEntityID == UAC2_ENTITY_CLOCK) { return tud_audio_clock_get_request(rhport, request); - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + } + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) { return tud_audio_feature_unit_get_request(rhport, request); - else - { + } else { TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); } @@ -243,14 +244,15 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } // Invoked when audio class specific set request received for an entity -bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) -{ +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { audio20_control_request_t const *request = (audio20_control_request_t const *)p_request; - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) { return tud_audio_feature_unit_set_request(rhport, request, buf); - if (request->bEntityID == UAC2_ENTITY_CLOCK) + } + if (request->bEntityID == UAC2_ENTITY_CLOCK) { return tud_audio_clock_set_request(rhport, request, buf); + } TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); @@ -301,7 +303,9 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; + if (board_millis() - start_ms < blink_interval_ms) { + return; + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/cdc_uac2/src/usb_descriptors.c b/examples/device/cdc_uac2/src/usb_descriptors.c index 252b602ac..e6caaa971 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.c +++ b/examples/device/cdc_uac2/src/usb_descriptors.c @@ -248,14 +248,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index 14ec315ea..48c9985f3 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -158,14 +158,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 37cb80093..5de651bcd 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -132,7 +132,9 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c index 1d46ee252..5d5cf52cd 100644 --- a/examples/device/dfu_runtime/src/usb_descriptors.c +++ b/examples/device/dfu_runtime/src/usb_descriptors.c @@ -153,14 +153,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 258cfcd02..dac74bb7a 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -109,23 +109,18 @@ void tud_resume_cb(void) //--------------------------------------------------------------------+ // USB CDC //--------------------------------------------------------------------+ -void cdc_task(void) -{ - if ( tud_cdc_connected() ) - { - // connected and there are data available - if ( tud_cdc_available() ) - { +void cdc_task(void) { + if (tud_cdc_connected()) { + // connected and there are data available read and echo back + if (tud_cdc_available()) { uint8_t buf[64]; - - // read and echo back uint32_t count = tud_cdc_read(buf, sizeof(buf)); - for(uint32_t i=0; i= sizeof(note_sequence)) note_pos = 0; + if (note_pos >= sizeof(note_sequence)) { + note_pos = 0; + } } //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return;// not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); - led_state = 1 - led_state; // toggle + led_state = 1 - led_state;// toggle } diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index ab71b02d6..e95b2e197 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -177,12 +177,13 @@ bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, boo // Callback invoked when received READ10 command. // Copy disk's data to buffer (up to bufsize) and return number of copied bytes. -int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) -{ +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) { (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) return -1; + if ( lba >= DISK_BLOCK_NUM ) { + return -1; + } uint8_t const* addr = msc_disk[lba] + offset; memcpy(buffer, addr, bufsize); @@ -192,12 +193,13 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff // Callback invoked when received WRITE10 command. // Process data in buffer to disk's storage and return number of written bytes -int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) -{ +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) { (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) return -1; + if ( lba >= DISK_BLOCK_NUM ) { + return -1; + } #ifndef CFG_EXAMPLE_MSC_READONLY uint8_t* addr = msc_disk[lba] + offset; diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 083279938..458b7c2a5 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -232,14 +232,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 45712cede..44a91db67 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -23,8 +23,8 @@ * */ -#include #include +#include #include #include "bsp/board_api.h" @@ -40,10 +40,10 @@ * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; @@ -52,21 +52,16 @@ void led_blinking_task(void); void hid_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; + tusb_rhport_init_t dev_init = {.role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO}; tusb_init(BOARD_TUD_RHPORT, &dev_init); board_init_after_tusb(); - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); @@ -81,29 +76,25 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ - (void) remote_wakeup_en; +void tud_suspend_cb(bool remote_wakeup_en) { + (void)remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } @@ -113,59 +104,54 @@ void tud_resume_cb(void) // Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..) // tud_hid_report_complete_cb() is used to send the next report after previous one is complete -void hid_task(void) -{ +void hid_task(void) { // Poll every 10ms - const uint32_t interval_ms = 10; - static uint32_t start_ms = 0; + const uint32_t interval_ms = 10; + static uint32_t start_ms = 0; - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) { + return; // not enough time + } start_ms += interval_ms; uint32_t const btn = board_button_read(); - if ( tud_suspended() && btn ) - { + if (tud_suspended() && btn) { // Wake up host if we are in suspend mode // and REMOTE_WAKEUP feature is enabled by host tud_remote_wakeup(); - } - else - { + } else { // keyboard interface - if ( tud_hid_n_ready(ITF_NUM_KEYBOARD) ) - { + if (tud_hid_n_ready(ITF_NUM_KEYBOARD)) { // used to avoid send multiple consecutive zero report for keyboard static bool has_keyboard_key = false; uint8_t const report_id = 0; uint8_t const modifier = 0; - if ( btn ) - { - uint8_t keycode[6] = { 0 }; - keycode[0] = HID_KEY_ARROW_RIGHT; + if (btn) { + uint8_t keycode[6] = {0}; + keycode[0] = HID_KEY_ARROW_RIGHT; tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, keycode); has_keyboard_key = true; - }else - { + } else { // send empty key report if previously has key pressed - if (has_keyboard_key) tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, NULL); + if (has_keyboard_key) { + tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, NULL); + } has_keyboard_key = false; } } // mouse interface - if ( tud_hid_n_ready(ITF_NUM_MOUSE) ) - { - if ( btn ) - { + if (tud_hid_n_ready(ITF_NUM_MOUSE)) { + if (btn) { uint8_t const report_id = 0; uint8_t const button_mask = 0; - int8_t const vertical = 0; - int8_t const horizontal = 0; - int8_t const delta = 5; + int8_t const vertical = 0; + int8_t const horizontal = 0; + int8_t const delta = 5; tud_hid_n_mouse_report(ITF_NUM_MOUSE, report_id, button_mask, delta, delta, vertical, horizontal); } @@ -175,10 +161,9 @@ void hid_task(void) // Invoked when received SET_PROTOCOL request // protocol is either HID_PROTOCOL_BOOT (0) or HID_PROTOCOL_REPORT (1) -void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) -{ - (void) instance; - (void) protocol; +void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) { + (void)instance; + (void)protocol; // nothing to do since we use the same compatible boot report for both Boot and Report mode. // TODO set a indicator for user @@ -187,11 +172,10 @@ void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) -{ - (void) instance; - (void) report; - (void) len; +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const *report, uint16_t len) { + (void)instance; + (void)report; + (void)len; // nothing to do } @@ -199,42 +183,40 @@ void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_ // Invoked when received GET_REPORT control request // Application must fill buffer report's content and return its length. // Return zero will cause the stack to STALL request -uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) -{ +uint16_t tud_hid_get_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t *buffer, uint16_t reqlen) { // TODO not Implemented - (void) instance; - (void) report_id; - (void) report_type; - (void) buffer; - (void) reqlen; + (void)instance; + (void)report_id; + (void)report_type; + (void)buffer; + (void)reqlen; return 0; } // Invoked when received SET_REPORT control request or // received data on OUT endpoint ( Report ID = 0, Type = 0 ) -void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) -{ - (void) report_id; +void tud_hid_set_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const *buffer, uint16_t bufsize) { + (void)report_id; // keyboard interface - if (instance == ITF_NUM_KEYBOARD) - { + if (instance == ITF_NUM_KEYBOARD) { // Set keyboard LED e.g Capslock, Numlock etc... - if (report_type == HID_REPORT_TYPE_OUTPUT) - { + if (report_type == HID_REPORT_TYPE_OUTPUT) { // bufsize should be (at least) 1 - if ( bufsize < 1 ) return; + if (bufsize < 1) { + return; + } uint8_t const kbd_leds = buffer[0]; - if (kbd_leds & KEYBOARD_LED_CAPSLOCK) - { + if (kbd_leds & KEYBOARD_LED_CAPSLOCK) { // Capslock On: disable blink, turn led on blink_interval_ms = 0; board_led_write(true); - }else - { + } else { // Caplocks Off: back to normal blink board_led_write(false); blink_interval_ms = BLINK_MOUNTED; @@ -246,16 +228,19 @@ void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_ //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ - static uint32_t start_ms = 0; - static bool led_state = false; +void led_blinking_task(void) { + static uint32_t start_ms = 0; + static bool led_state = false; // blink is disabled - if (!blink_interval_ms) return; + if (!blink_interval_ms) { + return; + } // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index 9b4becc85..b5c31a94a 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -33,60 +33,49 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ - PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4)) //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -static tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, - .bDeviceClass = 0x00, - .bDeviceSubClass = 0x00, - .bDeviceProtocol = 0x00, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0100, - - .iManufacturer = 0x01, - .iProduct = 0x02, - .iSerialNumber = 0x03, - - .bNumConfigurations = 0x01 -}; +static tusb_desc_device_t const desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01}; // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; +uint8_t const *tud_descriptor_device_cb(void) { + return (uint8_t const *)&desc_device; } //--------------------------------------------------------------------+ // HID Report Descriptor //--------------------------------------------------------------------+ -uint8_t const desc_hid_keyboard_report[] = -{ - TUD_HID_REPORT_DESC_KEYBOARD() -}; +uint8_t const desc_hid_keyboard_report[] = {TUD_HID_REPORT_DESC_KEYBOARD()}; -uint8_t const desc_hid_mouse_report[] = -{ - TUD_HID_REPORT_DESC_MOUSE() -}; +uint8_t const desc_hid_mouse_report[] = {TUD_HID_REPORT_DESC_MOUSE()}; // Invoked when received GET HID REPORT DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance) -{ +uint8_t const *tud_hid_descriptor_report_cb(uint8_t instance) { return (instance == 0) ? desc_hid_keyboard_report : desc_hid_mouse_report; } @@ -94,36 +83,37 @@ uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance) // Configuration Descriptor //--------------------------------------------------------------------+ -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + 2*TUD_HID_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + 2 * TUD_HID_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX - // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number - // 1 Interrupt, 2 Bulk, 3 Iso, 4 Interrupt, 5 Bulk etc ... - #define EPNUM_KEYBOARD 0x81 - #define EPNUM_MOUSE 0x84 +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 1 Interrupt, 2 Bulk, 3 Iso, 4 Interrupt, 5 Bulk etc ... +#define EPNUM_KEYBOARD 0x81 +#define EPNUM_MOUSE 0x84 #else - #define EPNUM_KEYBOARD 0x81 - #define EPNUM_MOUSE 0x82 +#define EPNUM_KEYBOARD 0x81 +#define EPNUM_MOUSE 0x82 #endif -uint8_t const desc_configuration[] = -{ +uint8_t const desc_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_KEYBOARD, 0, HID_ITF_PROTOCOL_KEYBOARD, sizeof(desc_hid_keyboard_report), EPNUM_KEYBOARD, CFG_TUD_HID_EP_BUFSIZE, 10), + TUD_HID_DESCRIPTOR( + ITF_NUM_KEYBOARD, 0, HID_ITF_PROTOCOL_KEYBOARD, sizeof(desc_hid_keyboard_report), EPNUM_KEYBOARD, + CFG_TUD_HID_EP_BUFSIZE, 10), // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_MOUSE, 0, HID_ITF_PROTOCOL_MOUSE, sizeof(desc_hid_mouse_report), EPNUM_MOUSE, CFG_TUD_HID_EP_BUFSIZE, 10) -}; + TUD_HID_DESCRIPTOR( + ITF_NUM_MOUSE, 0, HID_ITF_PROTOCOL_MOUSE, sizeof(desc_hid_mouse_report), EPNUM_MOUSE, CFG_TUD_HID_EP_BUFSIZE, + 10)}; // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ - (void) index; // for multiple configurations +uint8_t const *tud_descriptor_configuration_cb(uint8_t index) { + (void)index; // for multiple configurations return desc_configuration; } @@ -140,12 +130,11 @@ enum { }; // array of pointer to string descriptors -static char const *string_desc_arr[] = -{ - (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) - "TinyUSB", // 1: Manufacturer - "TinyUSB Device", // 2: Product - NULL, // 3: Serials will use unique ID if possible +static char const *string_desc_arr[] = { + (const char[]){0x09, 0x04}, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + NULL, // 3: Serials will use unique ID if possible }; static uint16_t _desc_str[32 + 1]; @@ -153,41 +142,44 @@ static uint16_t _desc_str[32 + 1]; // Invoked when received GET STRING DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { - (void) langid; + (void)langid; size_t chr_count; - switch ( index ) { + switch (index) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); chr_count = 1; break; - case STRID_SERIAL: - chr_count = board_usb_get_serial(_desc_str + 1, 32); - break; + case STRID_SERIAL: chr_count = board_usb_get_serial(_desc_str + 1, 32); break; default: // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); + size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 - for ( size_t i = 0; i < chr_count; i++ ) { + for (size_t i = 0; i < chr_count; i++) { _desc_str[1 + i] = str[i]; } break; } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); + _desc_str[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 89dab0bdc..9693d564d 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -23,8 +23,8 @@ * */ -#include #include +#include #include #include "bsp/board_api.h" @@ -41,10 +41,10 @@ * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; @@ -53,24 +53,18 @@ void led_blinking_task(void); void hid_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; + tusb_rhport_init_t dev_init = {.role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO}; tusb_init(BOARD_TUD_RHPORT, &dev_init); board_init_after_tusb(); - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); - hid_task(); } } @@ -80,29 +74,25 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ - (void) remote_wakeup_en; +void tud_suspend_cb(bool remote_wakeup_en) { + (void)remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } @@ -110,138 +100,128 @@ void tud_resume_cb(void) // USB HID //--------------------------------------------------------------------+ -static void send_hid_report(uint8_t report_id, uint32_t btn) -{ +static void send_hid_report(uint8_t report_id, uint32_t btn) { // skip if hid is not ready yet - if ( !tud_hid_ready() ) return; + if (!tud_hid_ready()) { + return; + } - switch(report_id) - { - case REPORT_ID_KEYBOARD: - { + switch (report_id) { + case REPORT_ID_KEYBOARD: { // use to avoid send multiple consecutive zero report for keyboard static bool has_keyboard_key = false; - if ( btn ) - { - uint8_t keycode[6] = { 0 }; - keycode[0] = HID_KEY_A; + if (btn != 0u) { + uint8_t keycode[6] = {0}; + keycode[0] = HID_KEY_A; tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode); has_keyboard_key = true; - }else - { + } else { // send empty key report if previously has key pressed - if (has_keyboard_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL); + if (has_keyboard_key) { + tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL); + } has_keyboard_key = false; } + break; } - break; - case REPORT_ID_MOUSE: - { + case REPORT_ID_MOUSE: { int8_t const delta = 5; // no button, right + down, no scroll, no pan tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0); + break; } - break; - case REPORT_ID_CONSUMER_CONTROL: - { + case REPORT_ID_CONSUMER_CONTROL: { // use to avoid send multiple consecutive zero report static bool has_consumer_key = false; - if ( btn ) - { + if (btn != 0u) { // volume down uint16_t volume_down = HID_USAGE_CONSUMER_VOLUME_DECREMENT; tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &volume_down, 2); has_consumer_key = true; - }else - { + } else { // send empty key report (release key) if previously has key pressed uint16_t empty_key = 0; - if (has_consumer_key) tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2); + if (has_consumer_key) { + tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2); + } has_consumer_key = false; } + break; } - break; - case REPORT_ID_GAMEPAD: - { + case REPORT_ID_GAMEPAD: { // use to avoid send multiple consecutive zero report for keyboard static bool has_gamepad_key = false; - hid_gamepad_report_t report = - { - .x = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0, - .hat = 0, .buttons = 0 - }; + hid_gamepad_report_t report = {.x = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0, .hat = 0, .buttons = 0}; - if ( btn ) - { - report.hat = GAMEPAD_HAT_UP; + if (btn != 0u) { + report.hat = GAMEPAD_HAT_UP; report.buttons = GAMEPAD_BUTTON_A; tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); has_gamepad_key = true; - }else - { - report.hat = GAMEPAD_HAT_CENTERED; + } else { + report.hat = GAMEPAD_HAT_CENTERED; report.buttons = 0; - if (has_gamepad_key) tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + if (has_gamepad_key) { + tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + } has_gamepad_key = false; } + break; } - break; case REPORT_ID_STYLUS_PEN: { - static bool touch_state = false; - hid_stylus_report_t report = { - .attr = 0, - .x = 0, - .y = 0 - }; - - if (btn) { + static bool touch_state = false; + hid_stylus_report_t report = {.attr = 0, .x = 0, .y = 0}; + + if (btn != 0u) { report.attr = STYLUS_ATTR_TIP_SWITCH | STYLUS_ATTR_IN_RANGE; - report.x = 100; - report.y = 100; + report.x = 100; + report.y = 100; tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); touch_state = true; } else { report.attr = 0; - if (touch_state) tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); + if (touch_state) { + tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); + } touch_state = false; } + break; } - break; - default: break; + + default: break; // unknown report id } } // Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..) // tud_hid_report_complete_cb() is used to send the next report after previous one is complete -void hid_task(void) -{ +void hid_task(void) { // Poll every 10ms - const uint32_t interval_ms = 10; - static uint32_t start_ms = 0; + const uint32_t interval_ms = 10; + static uint32_t start_ms = 0; - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) { + return; // not enough time + } start_ms += interval_ms; uint32_t const btn = board_button_read(); // Remote wakeup - if ( tud_suspended() && btn ) - { + if (tud_suspended() && btn != 0u) { // Wake up host if we are in suspend mode // and REMOTE_WAKEUP feature is enabled by host tud_remote_wakeup(); - }else - { + } else { // Send the 1st of report chain, the rest will be sent by tud_hid_report_complete_cb() send_hid_report(REPORT_ID_KEYBOARD, btn); } @@ -250,15 +230,13 @@ void hid_task(void) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) -{ - (void) instance; - (void) len; +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const *report, uint16_t len) { + (void)instance; + (void)len; uint8_t next_report_id = report[0] + 1u; - if (next_report_id < REPORT_ID_COUNT) - { + if (next_report_id < REPORT_ID_COUNT) { send_hid_report(next_report_id, board_button_read()); } } @@ -266,41 +244,39 @@ void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_ // Invoked when received GET_REPORT control request // Application must fill buffer report's content and return its length. // Return zero will cause the stack to STALL request -uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) -{ +uint16_t tud_hid_get_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t *buffer, uint16_t reqlen) { // TODO not Implemented - (void) instance; - (void) report_id; - (void) report_type; - (void) buffer; - (void) reqlen; + (void)instance; + (void)report_id; + (void)report_type; + (void)buffer; + (void)reqlen; return 0; } // Invoked when received SET_REPORT control request or // received data on OUT endpoint ( Report ID = 0, Type = 0 ) -void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) -{ - (void) instance; +void tud_hid_set_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const *buffer, uint16_t bufsize) { + (void)instance; - if (report_type == HID_REPORT_TYPE_OUTPUT) - { + if (report_type == HID_REPORT_TYPE_OUTPUT) { // Set keyboard LED e.g Capslock, Numlock etc... - if (report_id == REPORT_ID_KEYBOARD) - { + if (report_id == REPORT_ID_KEYBOARD) { // bufsize should be (at least) 1 - if ( bufsize < 1 ) return; + if (bufsize < 1) { + return; + } uint8_t const kbd_leds = buffer[0]; - if (kbd_leds & KEYBOARD_LED_CAPSLOCK) - { + if ((kbd_leds & KEYBOARD_LED_CAPSLOCK) != 0u) { // Capslock On: disable blink, turn led on blink_interval_ms = 0; board_led_write(true); - }else - { + } else { // Caplocks Off: back to normal blink board_led_write(false); blink_interval_ms = BLINK_MOUNTED; @@ -312,16 +288,19 @@ void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_ //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ - static uint32_t start_ms = 0; - static bool led_state = false; +void led_blinking_task(void) { + static uint32_t start_ms = 0; + static bool led_state = false; // blink is disabled - if (!blink_interval_ms) return; + if (0u == blink_interval_ms) { + return; + } // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/mtp/src/mtp_fs_example.c b/examples/device/mtp/src/mtp_fs_example.c index b4772f146..1c287be4d 100644 --- a/examples/device/mtp/src/mtp_fs_example.c +++ b/examples/device/mtp/src/mtp_fs_example.c @@ -39,12 +39,15 @@ #define DEV_PROP_FRIENDLY_NAME "TinyUSB MTP" //------------- storage info -------------// -#define STORAGE_DESCRIPTRION { 'd', 'i', 's', 'k', 0 } +#define STORAGE_DESCRIPTION { 'd', 'i', 's', 'k', 0 } #define VOLUME_IDENTIFIER { 'v', 'o', 'l', 0 } -typedef MTP_STORAGE_INFO_STRUCT(TU_ARRAY_SIZE((uint16_t[]) STORAGE_DESCRIPTRION), - TU_ARRAY_SIZE(((uint16_t[])VOLUME_IDENTIFIER)) -) storage_info_t; +enum { + STORAGE_DESC_LEN = TU_ARRAY_SIZE((uint16_t[]) STORAGE_DESCRIPTION), + VOLUME_ID_LEN = TU_ARRAY_SIZE((uint16_t[])VOLUME_IDENTIFIER) +}; + +typedef MTP_STORAGE_INFO_STRUCT(STORAGE_DESC_LEN, VOLUME_ID_LEN) storage_info_t; storage_info_t storage_info = { #ifdef CFG_EXAMPLE_MTP_READONLY @@ -60,7 +63,7 @@ storage_info_t storage_info = { .free_space_in_objects = 0, // calculated at runtime .storage_description = { .count = (TU_FIELD_SIZE(storage_info_t, storage_description)-1) / sizeof(uint16_t), - .utf16 = STORAGE_DESCRIPTRION + .utf16 = STORAGE_DESCRIPTION }, .volume_identifier = { .count = (TU_FIELD_SIZE(storage_info_t, volume_identifier)-1) / sizeof(uint16_t), @@ -320,9 +323,9 @@ int32_t tud_mtp_data_complete_cb(tud_mtp_cb_data_t* cb_data) { break; } // parameter is: storage id, parent handle, new handle - mtp_container_add_uint32(resp, SUPPORTED_STORAGE_ID); - mtp_container_add_uint32(resp, f->parent); - mtp_container_add_uint32(resp, send_obj_handle); + (void) mtp_container_add_uint32(resp, SUPPORTED_STORAGE_ID); + (void) mtp_container_add_uint32(resp, f->parent); + (void) mtp_container_add_uint32(resp, send_obj_handle); resp->header->code = MTP_RESP_OK; break; } @@ -346,19 +349,22 @@ int32_t tud_mtp_response_complete_cb(tud_mtp_cb_data_t* cb_data) { //--------------------------------------------------------------------+ static int32_t fs_get_device_info(tud_mtp_cb_data_t* cb_data) { // Device info is already prepared up to playback formats. Application only need to add string fields + int32_t resp_code = 0; mtp_container_info_t* io_container = &cb_data->io_container; - mtp_container_add_cstring(io_container, DEV_INFO_MANUFACTURER); - mtp_container_add_cstring(io_container, DEV_INFO_MODEL); - mtp_container_add_cstring(io_container, DEV_INFO_VERSION); + (void) mtp_container_add_cstring(io_container, DEV_INFO_MANUFACTURER); + (void) mtp_container_add_cstring(io_container, DEV_INFO_MODEL); + (void) mtp_container_add_cstring(io_container, DEV_INFO_VERSION); enum { MAX_SERIAL_NCHARS = 32 }; uint16_t serial_utf16[MAX_SERIAL_NCHARS+1]; size_t nchars = board_usb_get_serial(serial_utf16, MAX_SERIAL_NCHARS); serial_utf16[tu_min32(nchars, MAX_SERIAL_NCHARS)] = 0; // ensure null termination - mtp_container_add_string(io_container, serial_utf16); + (void) mtp_container_add_string(io_container, serial_utf16); - tud_mtp_data_send(io_container); - return 0; + if (!tud_mtp_data_send(io_container)) { + resp_code = MTP_RESP_DEVICE_BUSY; + } + return resp_code; } static int32_t fs_open_close_session(tud_mtp_cb_data_t* cb_data) { @@ -380,7 +386,7 @@ static int32_t fs_open_close_session(tud_mtp_cb_data_t* cb_data) { static int32_t fs_get_storage_ids(tud_mtp_cb_data_t* cb_data) { mtp_container_info_t* io_container = &cb_data->io_container; uint32_t storage_ids [] = { SUPPORTED_STORAGE_ID }; - mtp_container_add_auint32(io_container, 1, storage_ids); + (void) mtp_container_add_auint32(io_container, 1, storage_ids); tud_mtp_data_send(io_container); return 0; } @@ -394,7 +400,7 @@ static int32_t fs_get_storage_info(tud_mtp_cb_data_t* cb_data) { storage_info.max_capacity_in_bytes = sizeof(README_TXT_CONTENT) + LOGO_LEN + FS_MAX_CAPACITY_BYTES; storage_info.free_space_in_objects = FS_MAX_FILE_COUNT - fs_get_file_count(); storage_info.free_space_in_bytes = storage_info.free_space_in_objects ? FS_MAX_CAPACITY_BYTES : 0; - mtp_container_add_raw(io_container, &storage_info, sizeof(storage_info)); + (void) mtp_container_add_raw(io_container, &storage_info, sizeof(storage_info)); tud_mtp_data_send(io_container); return 0; } @@ -408,14 +414,14 @@ static int32_t fs_get_device_properties(tud_mtp_cb_data_t* cb_data) { // get describing dataset mtp_device_prop_desc_header_t device_prop_header; device_prop_header.device_property_code = dev_prop_code; - switch (dev_prop_code) { + switch (dev_prop_code) { //-V2520 //-V2659 case MTP_DEV_PROP_DEVICE_FRIENDLY_NAME: device_prop_header.datatype = MTP_DATA_TYPE_STR; device_prop_header.get_set = MTP_MODE_GET; - mtp_container_add_raw(io_container, &device_prop_header, sizeof(device_prop_header)); - mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); // factory - mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); // current - mtp_container_add_uint8(io_container, 0); // no form + (void) mtp_container_add_raw(io_container, &device_prop_header, sizeof(device_prop_header)); + (void) mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); // factory + (void) mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); // current + (void) mtp_container_add_uint8(io_container, 0); // no form tud_mtp_data_send(io_container); break; @@ -424,9 +430,9 @@ static int32_t fs_get_device_properties(tud_mtp_cb_data_t* cb_data) { } } else { // get value - switch (dev_prop_code) { + switch (dev_prop_code) { //-V2520 //-V2659 case MTP_DEV_PROP_DEVICE_FRIENDLY_NAME: - mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); + (void) mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); tud_mtp_data_send(io_container); break; @@ -446,20 +452,20 @@ static int32_t fs_get_object_handles(tud_mtp_cb_data_t* cb_data) { const uint32_t parent_handle = command->params[2]; // folder handle, 0xFFFFFFFF is root (void)obj_format; - if (storage_id != 0xFFFFFFFF && storage_id != SUPPORTED_STORAGE_ID) { + if (storage_id != 0xFFFFFFFFu && storage_id != SUPPORTED_STORAGE_ID) { return MTP_RESP_INVALID_STORAGE_ID; } uint32_t handles[FS_MAX_FILE_COUNT] = { 0 }; - uint32_t count = 0; - for (uint8_t i = 0; i < FS_MAX_FILE_COUNT; i++) { + uint32_t count = 0u; + for (uint8_t i = 0u; i < FS_MAX_FILE_COUNT; i++) { fs_file_t* f = &fs_objects[i]; if (fs_file_exist(f) && - (parent_handle == f->parent || (parent_handle == 0xFFFFFFFF && f->parent == 0))) { - handles[count++] = i + 1; // handle is index + 1 + (parent_handle == f->parent || (parent_handle == 0xFFFFFFFFu && f->parent == 0u))) { + handles[count++] = (uint32_t) i + 1u; // handle is index + 1 } } - mtp_container_add_auint32(io_container, count, handles); + (void) mtp_container_add_auint32(io_container, count, handles); tud_mtp_data_send(io_container); return 0; @@ -490,11 +496,11 @@ static int32_t fs_get_object_info(tud_mtp_cb_data_t* cb_data) { .association_desc = 0, .sequence_number = 0 }; - mtp_container_add_raw(io_container, &obj_info_header, sizeof(obj_info_header)); - mtp_container_add_string(io_container, f->name); - mtp_container_add_cstring(io_container, FS_FIXED_DATETIME); - mtp_container_add_cstring(io_container, FS_FIXED_DATETIME); - mtp_container_add_cstring(io_container, ""); // keywords, not used + (void) mtp_container_add_raw(io_container, &obj_info_header, sizeof(obj_info_header)); + (void) mtp_container_add_string(io_container, f->name); + (void) mtp_container_add_cstring(io_container, FS_FIXED_DATETIME); + (void) mtp_container_add_cstring(io_container, FS_FIXED_DATETIME); + (void) mtp_container_add_cstring(io_container, ""); // keywords, not used tud_mtp_data_send(io_container); return 0; @@ -512,7 +518,7 @@ static int32_t fs_get_object(tud_mtp_cb_data_t* cb_data) { if (cb_data->phase == MTP_PHASE_COMMAND) { // If file contents is larger than CFG_TUD_MTP_EP_BUFSIZE, data may only partially is added here // the rest will be sent in tud_mtp_data_more_cb - mtp_container_add_raw(io_container, f->data, f->size); + (void) mtp_container_add_raw(io_container, f->data, f->size); tud_mtp_data_send(io_container); } else if (cb_data->phase == MTP_PHASE_DATA) { // continue sending remaining data: file contents offset is xferred byte minus header size @@ -522,6 +528,8 @@ static int32_t fs_get_object(tud_mtp_cb_data_t* cb_data) { memcpy(io_container->payload, f->data + offset, xact_len); tud_mtp_data_send(io_container); } + } else { + // nothing to do } return 0; @@ -537,21 +545,21 @@ static int32_t fs_send_object_info(tud_mtp_cb_data_t* cb_data) { if (!is_session_opened) { return MTP_RESP_SESSION_NOT_OPEN; } - if (storage_id != 0xFFFFFFFF && storage_id != SUPPORTED_STORAGE_ID) { + if (storage_id != 0xFFFFFFFFu && storage_id != SUPPORTED_STORAGE_ID) { return MTP_RESP_INVALID_STORAGE_ID; } if (cb_data->phase == MTP_PHASE_COMMAND) { - tud_mtp_data_receive(io_container); + (void) tud_mtp_data_receive(io_container); } else if (cb_data->phase == MTP_PHASE_DATA) { mtp_object_info_header_t* obj_info = (mtp_object_info_header_t*) io_container->payload; if (obj_info->storage_id != 0 && obj_info->storage_id != SUPPORTED_STORAGE_ID) { return MTP_RESP_INVALID_STORAGE_ID; } - if (obj_info->parent_object) { + if (obj_info->parent_object != 0) { // not root fs_file_t* parent = fs_get_file(obj_info->parent_object); - if (parent == NULL || !parent->association_type) { + if (parent == NULL || 0u == parent->association_type) { return MTP_RESP_INVALID_PARENT_OBJECT; } } @@ -575,8 +583,10 @@ static int32_t fs_send_object_info(tud_mtp_cb_data_t* cb_data) { f->size = obj_info->object_compressed_size; f->data = f_buf; uint8_t* buf = io_container->payload + sizeof(mtp_object_info_header_t); - mtp_container_get_string(buf, f->name); + (void) mtp_container_get_string(buf, f->name); // ignore date created/modified/keywords + } else { + // nothing to do } return 0; diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 16c0d48d7..c2e7bf8f2 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -301,10 +301,10 @@ function(family_configure_common TARGET RTOS) COMMAND_EXPAND_LISTS ) # generate C-STAT report -# add_custom_command(TARGET ${TARGET} POST_BUILD -# COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/cstat_report -# COMMAND ireport --db=${CMAKE_BINARY_DIR}/cstat.db --full --project ${TARGET} --output ${CMAKE_CURRENT_BINARY_DIR}/cstat_report/index.html -# ) + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/cstat_report + COMMAND ireport --db=${CMAKE_BINARY_DIR}/cstat.db --full --project ${TARGET} --output ${CMAKE_CURRENT_BINARY_DIR}/cstat_report/index.html + ) endif () endif () diff --git a/src/class/mtp/mtp.h b/src/class/mtp/mtp.h index 40b6dd8b0..236cf98e0 100644 --- a/src/class/mtp/mtp.h +++ b/src/class/mtp/mtp.h @@ -799,18 +799,18 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_add_array(mtp_contain TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_add_string(mtp_container_info_t* p_container, uint16_t* utf16) { uint8_t count = 0; - while (utf16[count]) { + while (utf16[count] != 0u) { count++; } - const uint32_t added_len = 1u + 2u * count; + const uint32_t added_len = 1u + (uint32_t) count * 2u; TU_ASSERT(p_container->header->len + added_len < CFG_TUD_MTP_EP_BUFSIZE, 0); uint8_t* buf = p_container->payload + p_container->header->len - sizeof(mtp_container_header_t); *buf++ = count; p_container->header->len++; - memcpy(buf, utf16, 2 * count); - p_container->header->len += 2 * count; + memcpy(buf, utf16, 2u * (uint32_t) count); + p_container->header->len += 2u * count; return added_len; } @@ -824,7 +824,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_add_cstring(mtp_conta // empty string (null only): single zero byte *buf = 0; p_container->header->len++; - return 1; + return 1u; } else { *buf++ = len; p_container->header->len++; @@ -875,8 +875,8 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_add_auint32(mtp_conta // //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_get_string(uint8_t* buf, uint16_t utf16[]) { - uint8_t nchars = *buf++; - memcpy(utf16, buf, 2 * nchars); + size_t nchars = *buf++; + memcpy(utf16, buf, 2u * nchars); return 1u + 2u * nchars; } diff --git a/src/class/mtp/mtp_device.h b/src/class/mtp/mtp_device.h index 397fbbbce..a33f1dc08 100644 --- a/src/class/mtp/mtp_device.h +++ b/src/class/mtp/mtp_device.h @@ -53,12 +53,14 @@ typedef struct { typedef struct { uint8_t idx; uint8_t stage; // control stage - uint32_t session_id; - const tusb_control_request_t* request; // buffer for data stage - uint8_t* buf; uint16_t bufsize; + uint8_t* buf; + + const tusb_control_request_t* request; + + uint32_t session_id; } tud_mtp_request_cb_data_t; // Number of supported operations, events, device properties, capture formats, playback formats @@ -78,7 +80,7 @@ typedef struct { /* string fields will be added using append function */ \ } -typedef MTP_DEVICE_INFO_STRUCT( +typedef MTP_DEVICE_INFO_STRUCT( //-V2586 [MISRA-C-18.7] Flexible array members should not be declared sizeof(CFG_TUD_MTP_DEVICEINFO_EXTENSIONS), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_SUPPORTED_OPERATIONS), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_SUPPORTED_EVENTS), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_SUPPORTED_DEVICE_PROPERTIES), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_CAPTURE_FORMATS), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_PLAYBACK_FORMATS) diff --git a/src/class/video/video.h b/src/class/video/video.h index f348e187b..5bdf4b840 100644 --- a/src/class/video/video.h +++ b/src/class/video/video.h @@ -219,11 +219,11 @@ typedef enum { uint8_t baInterfaceNr[_nitf]; \ } -typedef tusb_desc_video_control_header_nitf_t() tusb_desc_video_control_header_t; -typedef tusb_desc_video_control_header_nitf_t(1) tusb_desc_video_control_header_1itf_t; -typedef tusb_desc_video_control_header_nitf_t(2) tusb_desc_video_control_header_2itf_t; -typedef tusb_desc_video_control_header_nitf_t(3) tusb_desc_video_control_header_3itf_t; -typedef tusb_desc_video_control_header_nitf_t(4) tusb_desc_video_control_header_4itf_t; +typedef tusb_desc_video_control_header_nitf_t() tusb_desc_video_control_header_t; //-V2586 incorrectly detected as flexible array +typedef tusb_desc_video_control_header_nitf_t(1) tusb_desc_video_control_header_1itf_t; //-V2586 incorrectly detected as flexible array +typedef tusb_desc_video_control_header_nitf_t(2) tusb_desc_video_control_header_2itf_t; //-V2586 incorrectly detected as flexible array +typedef tusb_desc_video_control_header_nitf_t(3) tusb_desc_video_control_header_3itf_t; //-V2586 incorrectly detected as flexible array +typedef tusb_desc_video_control_header_nitf_t(4) tusb_desc_video_control_header_4itf_t; //-V2586 incorrectly detected as flexible array typedef struct TU_ATTR_PACKED { uint8_t bLength; diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 5f659eb95..7aa42a2d7 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -236,7 +236,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_round_up(uint32_t v, uint32_t f) // TODO use clz TODO remove TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_log2(uint32_t value) { uint8_t result = 0; - while (value >>= 1) { + while ((value >>= 1u) != 0u) { result++; } return result; @@ -355,7 +355,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_subtype(void const* desc) { } TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_in_bounds(uint8_t const* p_desc, uint8_t const* desc_end) { - return (p_desc < desc_end) && (tu_desc_next(p_desc) <= desc_end); + if (p_desc >= desc_end) { + return false; + } + return tu_desc_next(p_desc) <= desc_end; } // find descriptor that match byte1 (type) diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index df4034098..a7bf3e959 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -119,7 +119,9 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 // not found return the key value in hex static char not_found[11]; - snprintf(not_found, sizeof(not_found), "0x%08lX", (unsigned long) key); + if (snprintf(not_found, sizeof(not_found), "0x%08lX", (unsigned long) key) <= 0) { + not_found[0] = 0; + } return not_found; } diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index c9700fd9d..2c2ff76b7 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -93,7 +93,7 @@ static bool data_stage_xact(uint8_t rhport) { if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_IN) { ep_addr = EDPT_CTRL_IN; - if (xact_len) { + if (0u != xact_len) { TU_VERIFY(0 == tu_memcpy_s(_ctrl_epbuf.buf, CFG_TUD_ENDPOINT0_SIZE, _ctrl_xfer.buffer, xact_len)); } } @@ -159,7 +159,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, // invoke optional dcd hook if available dcd_edpt0_status_complete(rhport, &_ctrl_xfer.request); - if (_ctrl_xfer.complete_cb) { + if (NULL != _ctrl_xfer.complete_cb) { // TODO refactor with usbd_driver_print_control_complete_name _ctrl_xfer.complete_cb(rhport, CONTROL_STAGE_ACK, &_ctrl_xfer.request); } @@ -185,7 +185,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, // invoke complete callback if set // callback can still stall control in status phase e.g out data does not make sense - if (_ctrl_xfer.complete_cb) { + if (NULL != _ctrl_xfer.complete_cb) { #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL usbd_driver_print_control_complete_name(_ctrl_xfer.complete_cb); #endif diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 2894d3023..6e220129a 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -125,14 +125,9 @@ bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr) { // Enable SOF interrupt void usbd_sof_enable(uint8_t rhport, sof_consumer_t consumer, bool en); -/*------------------------------------------------------------------*/ -/* Helper - *------------------------------------------------------------------*/ - bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in); void usbd_defer_func(osal_task_func_t func, void *param, bool in_isr); - #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback); #endif diff --git a/src/tusb.c b/src/tusb.c index d52c156ab..be67eead2 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -599,7 +599,9 @@ void tu_print_mem(void const* buf, uint32_t count, uint8_t indent) { if (remain) { for (uint32_t i = 0; i < 16 - remain; i++) { tu_printf(" "); - for (int j = 0; j < 2 * size; j++) tu_printf(" "); + for (int j = 0; j < 2 * size; j++) { + tu_printf(" "); + } } } -- cgit v1.3.1 From 0172f40e66b3518e6593f5aa89afb9b0116fa75c Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Nov 2025 11:39:10 +0700 Subject: update espressif cmake --- examples/host/cdc_msc_hid_freertos/only.txt | 2 +- examples/host/device_info/only.txt | 4 +-- .../components/tinyusb_src/CMakeLists.txt | 41 ++++------------------ hw/bsp/family_support.cmake | 6 ++-- src/CMakeLists.txt | 13 +++++-- 5 files changed, 22 insertions(+), 44 deletions(-) diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 576271aff..ef0a1ac96 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -1,4 +1,3 @@ -mcu:ESP32P4 mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX @@ -15,5 +14,6 @@ mcu:STM32F7 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 +family:espressif family:samd21 family:samd5x_e5x diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index 133a7c9a0..61a08f68d 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,7 +1,4 @@ mcu:CH32V20X -mcu:ESP32S2 -mcu:ESP32S3 -mcu:ESP32P4 mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X @@ -21,5 +18,6 @@ mcu:STM32F7 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 +family:espressif family:samd21 family:samd5x_e5x diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index beabcad9c..c011b926e 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -1,12 +1,12 @@ idf_build_get_property(target IDF_TARGET) +include(CMakePrintHelpers) -set(srcs) -set(includes_public) -set(compile_options) -set(tusb_src "${CMAKE_CURRENT_SOURCE_DIR}/../../../../../src") +set(tusb_src ${CMAKE_CURRENT_LIST_DIR}/../../../../../src) +get_filename_component(tusb_src ${tusb_src} ABSOLUTE) +include(${tusb_src}/CMakeLists.txt) string(TOUPPER OPT_MCU_${target} tusb_mcu) -list(APPEND compile_definitions +set(compile_definitions CFG_TUSB_MCU=${tusb_mcu} CFG_TUSB_OS=OPT_OS_FREERTOS BOARD_TUD_RHPORT=${RHPORT_DEVICE} @@ -14,7 +14,7 @@ list(APPEND compile_definitions BOARD_TUH_RHPORT=${RHPORT_HOST} BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} ) - +cmake_print_variables(compile_definitions) if (target STREQUAL esp32p4) # P4 change alignment to 64 (DCache line size) for possible DMA configuration list(APPEND compile_definitions @@ -23,36 +23,11 @@ if (target STREQUAL esp32p4) ) endif () +tinyusb_sources_get(srcs) list(APPEND srcs - # common - ${tusb_src}/tusb.c - ${tusb_src}/common/tusb_fifo.c - # device - ${tusb_src}/device/usbd.c - ${tusb_src}/device/usbd_control.c - ${tusb_src}/class/audio/audio_device.c - ${tusb_src}/class/cdc/cdc_device.c - ${tusb_src}/class/dfu/dfu_device.c - ${tusb_src}/class/dfu/dfu_rt_device.c - ${tusb_src}/class/hid/hid_device.c - ${tusb_src}/class/midi/midi_device.c - ${tusb_src}/class/msc/msc_device.c - ${tusb_src}/class/mtp/mtp_device.c - ${tusb_src}/class/net/ecm_rndis_device.c - ${tusb_src}/class/net/ncm_device.c - ${tusb_src}/class/usbtmc/usbtmc_device.c - ${tusb_src}/class/vendor/vendor_device.c - ${tusb_src}/class/video/video_device.c ${tusb_src}/portable/synopsys/dwc2/dcd_dwc2.c ${tusb_src}/portable/synopsys/dwc2/hcd_dwc2.c ${tusb_src}/portable/synopsys/dwc2/dwc2_common.c - # host - ${tusb_src}/host/usbh.c - ${tusb_src}/host/hub.c - ${tusb_src}/class/cdc/cdc_host.c - ${tusb_src}/class/hid/hid_host.c - ${tusb_src}/class/msc/msc_host.c - ${tusb_src}/class/vendor/vendor_host.c ) # use max3421 as host controller @@ -74,7 +49,6 @@ if(DEFINED CFLAGS_CLI) list(APPEND compile_definitions ${CFLAGS_CLI}) endif() - idf_component_register(SRCS ${srcs} INCLUDE_DIRS ${tusb_src} REQUIRES src @@ -82,4 +56,3 @@ idf_component_register(SRCS ${srcs} ) target_compile_definitions(${COMPONENT_LIB} PUBLIC ${compile_definitions}) -target_compile_options(${COMPONENT_LIB} PRIVATE -Wno-error=format) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index c2e7bf8f2..ad68957df 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -12,7 +12,7 @@ set(UF2CONV_PY ${TOP}/tools/uf2/utils/uf2conv.py) #------------------------------------------------------------- # Toolchain -# Can be changed via -DTOOLCHAIN=gcc|iar or -DCMAKE_C_COMPILER= +# Can be changed via -DTOOLCHAIN=gcc|iar or -DCMAKE_C_COMPILER= or ENV{CC}= #------------------------------------------------------------- function(detect_compiler COMPILER_PATH RESULT) string(FIND ${COMPILER_PATH} "iccarm" IS_IAR) @@ -319,8 +319,8 @@ endfunction() # Add tinyusb to target function(family_add_tinyusb TARGET OPT_MCU) - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + # tinyusb's CMakeLists.txt + include(${TOP}/src/CMakeLists.txt) # Add TinyUSB sources, include and common define tinyusb_target_add(${TARGET}) diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 951683104..48dc75e50 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -1,8 +1,8 @@ cmake_minimum_required(VERSION 3.20) -# Add tinyusb to a existing target, DCD and HCD drivers are not included -function(tinyusb_target_add TARGET) - target_sources(${TARGET} PRIVATE +# Get TinyUSB sources. Note: DCD and HCD drivers are not included +function(tinyusb_sources_get OUTPUT_VAR) + set(${OUTPUT_VAR} # common ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tusb.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/common/tusb_fifo.c @@ -32,7 +32,14 @@ function(tinyusb_target_add TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/vendor/vendor_host.c # typec ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/typec/usbc.c + PARENT_SCOPE ) +endfunction() + +# Add tinyusb to a existing target +function(tinyusb_target_add TARGET) + tinyusb_sources_get(TINYUSB_SRC) + target_sources(${TARGET} PRIVATE ${TINYUSB_SRC}) target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} # TODO for net driver, should be removed/changed -- cgit v1.3.1 From 1f84dd595a511c82d766b39c2659869bc259be8f Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Nov 2025 18:22:37 +0700 Subject: fix compile issue when enable both host and device for dwc2 --- src/portable/synopsys/dwc2/dcd_dwc2.c | 1 - src/portable/synopsys/dwc2/dwc2_common.c | 10 ---------- src/portable/synopsys/dwc2/dwc2_common.h | 8 ++++++++ 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index b2531426a..06579fbb3 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1050,7 +1050,6 @@ static void handle_ep_irq(uint8_t rhport, uint8_t dir) { Note: when OTG_MULTI_PROC_INTRPT = 1, Device Each endpoint interrupt deachint/deachmsk/diepeachmsk/doepeachmsk are combined to generate dedicated interrupt line for each endpoint. */ -//-V::2584::{gintsts} PVS-Studio suppression void dcd_int_handler(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); const uint32_t gintmask = dwc2->gintmsk; diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 5ff18ab94..980574e12 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -29,16 +29,6 @@ #define DWC2_COMMON_DEBUG 2 #if defined(TUP_USBIP_DWC2) && (CFG_TUH_ENABLED || CFG_TUD_ENABLED) - -#if CFG_TUD_ENABLED -#include "device/dcd.h" -#endif - -#if CFG_TUH_ENABLED -#include "host/hcd.h" -#include "host/usbh.h" -#endif - #include "dwc2_common.h" //-------------------------------------------------------------------- diff --git a/src/portable/synopsys/dwc2/dwc2_common.h b/src/portable/synopsys/dwc2/dwc2_common.h index 0166b0261..dc204f578 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.h +++ b/src/portable/synopsys/dwc2/dwc2_common.h @@ -30,6 +30,14 @@ #include "common/tusb_common.h" #include "dwc2_type.h" +#if CFG_TUD_ENABLED +#include "device/dcd.h" +#endif + +#if CFG_TUH_ENABLED +#include "host/hcd.h" +#endif + // Following symbols must be defined by port header // - _dwc2_controller[]: array of controllers // - DWC2_EP_MAX: largest EP counts of all controllers -- cgit v1.3.1 From cd90d94e7c67aff189becee8815633ac1549a1d8 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Nov 2025 18:26:04 +0700 Subject: make host info to devcie cdc to work with freertos/noos --- .PVS-Studio/.pvsconfig | 6 +- examples/device/video_capture/src/main.c | 18 ++- examples/device/video_capture_2ch/src/main.c | 6 +- .../dual/host_info_to_device_cdc/CMakeLists.txt | 7 +- examples/dual/host_info_to_device_cdc/only.txt | 1 + .../host_info_to_device_cdc/src/CMakeLists.txt | 4 + examples/dual/host_info_to_device_cdc/src/main.c | 126 +++++++++++++++++++-- .../components/tinyusb_src/CMakeLists.txt | 2 +- 8 files changed, 146 insertions(+), 24 deletions(-) create mode 100644 examples/dual/host_info_to_device_cdc/src/CMakeLists.txt diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index 2e231c939..2cc60722a 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -1,10 +1,14 @@ //V_EXCLUDE_PATH */iar/cxarm* -//V_EXCLUDE_PATH */pico-sdk/* +//V_EXCLUDE_PATH */pico-sdk/ +//V_EXCLUDE_PATH */esp-idf/ +//V_EXCLUDE_PATH */hw/bsp/espressif/components/ +//V_EXCLUDE_PATH */hw/mcu/ //-V::2506 MISRA. A function should have a single point of exit at the end. //-V::2514 MISRA. Unions should not be used. //-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. //-V:printf:2547 [MISRA-C-17.7] The return value of non-void function 'printf' should be used. +//-V::2584::{gintsts} dwc2 //-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. //+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES //-V:memcpy:2628 Pointer arguments to the 'memcpy' function should be pointers to qualified or unqualified versions of compatible types. diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 29656e944..adcfb9f95 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -53,7 +53,7 @@ void usb_device_task(void *param); void video_task(void* param); #if CFG_TUSB_OS == OPT_OS_FREERTOS -void freertos_init_task(void); +void freertos_init(void); #endif @@ -65,7 +65,7 @@ int main(void) { // If using FreeRTOS: create blinky, tinyusb device, video task #if CFG_TUSB_OS == OPT_OS_FREERTOS - freertos_init_task(); + freertos_init(); #else // init device stack on configured roothub port tusb_rhport_init_t dev_init = { @@ -211,8 +211,12 @@ static void video_send_frame(void) { } unsigned cur = board_millis(); - if (cur - start_ms < interval_ms) return; // not enough time - if (tx_busy) return; + if (cur - start_ms < interval_ms) { + return; // not enough time + } + if (tx_busy) { + return; + } start_ms += interval_ms; tx_busy = 1; @@ -273,7 +277,9 @@ void led_blinking_task(void* param) { #if CFG_TUSB_OS == OPT_OS_FREERTOS vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); #else - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } #endif start_ms += blink_interval_ms; @@ -336,7 +342,7 @@ void usb_device_task(void *param) { } } -void freertos_init_task(void) { +void freertos_init(void) { #if configSUPPORT_STATIC_ALLOCATION xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index a63efa82d..79b149f2b 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -53,7 +53,7 @@ void usb_device_task(void *param); void video_task(void* param); #if CFG_TUSB_OS == OPT_OS_FREERTOS -void freertos_init_task(void); +void freertos_init(void); #endif @@ -65,7 +65,7 @@ int main(void) { // If using FreeRTOS: create blinky, tinyusb device, video task #if CFG_TUSB_OS == OPT_OS_FREERTOS - freertos_init_task(); + freertos_init(); #else // init device stack on configured roothub port tusb_rhport_init_t dev_init = { @@ -343,7 +343,7 @@ void usb_device_task(void *param) { } } -void freertos_init_task(void) { +void freertos_init(void) { #if configSUPPORT_STATIC_ALLOCATION xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); diff --git a/examples/dual/host_info_to_device_cdc/CMakeLists.txt b/examples/dual/host_info_to_device_cdc/CMakeLists.txt index 6ae5b5766..ad3c5ddf0 100644 --- a/examples/dual/host_info_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_info_to_device_cdc/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source @@ -25,7 +30,7 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_dual_usb_example(${PROJECT} noos) +family_configure_dual_usb_example(${PROJECT} ${RTOS}) # due to warnings from Pico-PIO-USB if (FAMILY STREQUAL rp2040) diff --git a/examples/dual/host_info_to_device_cdc/only.txt b/examples/dual/host_info_to_device_cdc/only.txt index 35f896f1e..4431065ba 100644 --- a/examples/dual/host_info_to_device_cdc/only.txt +++ b/examples/dual/host_info_to_device_cdc/only.txt @@ -8,3 +8,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:ESP32P4 diff --git a/examples/dual/host_info_to_device_cdc/src/CMakeLists.txt b/examples/dual/host_info_to_device_cdc/src/CMakeLists.txt new file mode 100644 index 000000000..cef2b46ee --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/src/CMakeLists.txt @@ -0,0 +1,4 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS "main.c" "usb_descriptors.c" + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 5f3964196..1486bc83e 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -75,8 +75,12 @@ static tusb_desc_device_t descriptor_device[CFG_TUH_DEVICE_MAX+1]; static void print_utf16(uint16_t *temp_buf, size_t buf_len); static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_device); -void led_blinking_task(void); -void cdc_task(void); +static void led_blinking_task(void); +static void cdc_task(void); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +static void freertos_init(void); +#endif #define cdc_printf(...) \ do { \ @@ -94,37 +98,86 @@ void cdc_task(void); } \ } while(0) -/*------------- MAIN -------------*/ -int main(void) { - board_init(); - - printf("TinyUSB Host Information -> Device CDC Example\r\n"); +static void usb_device_init(void) { // init device and host stack on configured roothub port tusb_rhport_init_t dev_init = { .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUD_RHPORT, &dev_init); + board_init_after_tusb(); +} +static void usb_host_init(void) { + // init host stack on configured roothub port tusb_rhport_init_t host_init = { .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUH_RHPORT, &host_init); - board_init_after_tusb(); +} + +//--------------------------------------------------------------------+ +// Main +//--------------------------------------------------------------------+ +static void main_task(void* param) { + (void) param; while (1) { - tud_task(); // tinyusb device task - tuh_task(); // tinyusb host task cdc_task(); led_blinking_task(); + + // preempted RTOS run device/host stack in its own task +#if CFG_TUSB_OS == OPT_OS_NONE || CFG_TUSB_OS == OPT_OS_PICO + tud_task(); // tinyusb device task + tuh_task(); // tinyusb host task +#endif } +} + +int main(void) { + board_init(); + +#if CFG_TUSB_OS == OPT_OS_NONE || CFG_TUSB_OS == OPT_OS_PICO + printf("TinyUSB Host Information -> Device CDC Example\r\n"); + + usb_device_init(); + usb_host_init(); + + main_task(NULL); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + freertos_init(); // create RTOS tasks for device, host stack and main_task() +#else + #error RTOS not supported +#endif return 0; } +#if CFG_TUSB_OS != OPT_OS_NONE && CFG_TUSB_OS != OPT_OS_PICO +// USB Device Driver task for RTOS +static void usb_device_task(void *param) { + (void) param; + usb_device_init(); + while (1) { + // put this thread to waiting state until there is new events + tud_task(); + } +} + +static void usb_host_task(void *param) { + (void) param; + usb_host_init(); + while (1) { + // put this thread to waiting state until there is new events + tuh_task(); + } +} +#endif + + //--------------------------------------------------------------------+ // Device CDC //--------------------------------------------------------------------+ @@ -156,7 +209,7 @@ void cdc_task(void) { if (!tud_cdc_connected()) { // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop - board_delay(20); + tusb_time_delay_ms_api(20); return; } @@ -259,7 +312,6 @@ void led_blinking_task(void) { //--------------------------------------------------------------------+ // String Descriptor Helper //--------------------------------------------------------------------+ - static void _convert_utf16le_to_utf8(const uint16_t *utf16, size_t utf16_len, uint8_t *utf8, size_t utf8_len) { // TODO: Check for runover. (void)utf8_len; @@ -310,3 +362,53 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { cdc_printf("%s", (char*) temp_buf); } + +//--------------------------------------------------------------------+ +// FreeRTOS +//--------------------------------------------------------------------+ +#if CFG_TUSB_OS == OPT_OS_FREERTOS + +#ifdef ESP_PLATFORM + #define USBD_STACK_SIZE 4096 + #define USBH_STACK_SIZE 4096 + void app_main(void) { + main(); + } +#else + // Increase stack size when debug log is enabled + #define USBD_STACK_SIZE (configMINIMAL_STACK_SIZE * (CFG_TUSB_DEBUG ? 4 : 2)) + #define USBH_STACK_SIZE (configMINIMAL_STACK_SIZE * (CFG_TUSB_DEBUG ? 4 : 2)) +#endif + +#define MAIN_STACK_SIZE (configMINIMAL_STACK_SIZE*4) + +// static task +#if configSUPPORT_STATIC_ALLOCATION +StackType_t main_stack[MAIN_STACK_SIZE]; +StaticTask_t main_taskdef; + +StackType_t usb_device_stack[USBD_STACK_SIZE]; +StaticTask_t usb_device_taskdef; + +StackType_t usb_host_stack[USBH_STACK_SIZE]; +StaticTask_t usb_host_taskdef; +#endif + +void freertos_init(void) { + #if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); + xTaskCreateStatic(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_host_stack, &usb_host_taskdef); + xTaskCreateStatic(main_task, "main", MAIN_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, main_stack, &main_taskdef); + #else + xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(usb_host_task, "usbh", USBH_STACK_SZE, NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(main_task, "main", MAIN_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); + #endif + + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM + vTaskStartScheduler(); + #endif +} + +#endif diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index c011b926e..2f529dd68 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -14,7 +14,7 @@ set(compile_definitions BOARD_TUH_RHPORT=${RHPORT_HOST} BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} ) -cmake_print_variables(compile_definitions) + if (target STREQUAL esp32p4) # P4 change alignment to 64 (DCache line size) for possible DMA configuration list(APPEND compile_definitions -- cgit v1.3.1 From 94c1e05a72b197fc0508d43e91deeb3fc63bb4d6 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Nov 2025 19:26:44 +0700 Subject: fix typo detected by copilot --- examples/dual/host_info_to_device_cdc/src/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 1486bc83e..03a1ac3d8 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -401,8 +401,8 @@ void freertos_init(void) { xTaskCreateStatic(main_task, "main", MAIN_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, main_stack, &main_taskdef); #else xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); - xTaskCreate(usb_host_task, "usbh", USBH_STACK_SZE, NULL, configMAX_PRIORITIES - 1, NULL); - xTaskCreate(main_task, "main", MAIN_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); + xTaskCreate(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(main_task, "main", MAIN_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, NULL); #endif // only start scheduler for non-espressif mcu -- cgit v1.3.1 From 86a4990b96eafb5904f946fa061b310f155a7d51 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 5 Nov 2025 19:56:54 +0700 Subject: fix more alerts --- examples/device/cdc_msc/src/main.c | 35 +++++++++++++++++------------------ src/common/tusb_compiler.h | 2 +- src/common/tusb_private.h | 4 ++-- src/common/tusb_verify.h | 2 +- src/portable/ehci/ehci.c | 2 +- 5 files changed, 22 insertions(+), 23 deletions(-) diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index ff998a13d..e4a205533 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -37,12 +37,12 @@ */ enum { BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; -static bool blink_enable = true; +static bool blink_enable = true; void led_blinking_task(void); void cdc_task(void); @@ -52,10 +52,7 @@ int main(void) { board_init(); // init device stack on configured roothub port - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; + tusb_rhport_init_t dev_init = {.role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO}; tusb_init(BOARD_TUD_RHPORT, &dev_init); board_init_after_tusb(); @@ -86,7 +83,7 @@ void tud_umount_cb(void) { // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus void tud_suspend_cb(bool remote_wakeup_en) { - (void) remote_wakeup_en; + (void)remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } @@ -107,9 +104,9 @@ void cdc_task(void) { // connected and there are data available if (tud_cdc_available()) { // read data - char buf[64]; + char buf[64]; uint32_t count = tud_cdc_read(buf, sizeof(buf)); - (void) count; + (void)count; // Echo back // Note: Skip echo by commenting out write() and write_flush() @@ -120,10 +117,12 @@ void cdc_task(void) { } // Press on-board button to send Uart status notification + static cdc_notify_uart_state_t uart_state = {.value = 0}; + static uint32_t btn_prev = 0; - static cdc_notify_uart_state_t uart_state = { .value = 0 }; - const uint32_t btn = board_button_read(); - if ((btn_prev == 0u) && btn) { + const uint32_t btn = board_button_read(); + + if ((btn_prev == 0u) && (btn != 0u)) { uart_state.dsr ^= 1; tud_cdc_notify_uart_state(&uart_state); } @@ -133,8 +132,8 @@ void cdc_task(void) { // Invoked when cdc when line state changed e.g connected/disconnected void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { - (void) itf; - (void) rts; + (void)itf; + (void)rts; if (dtr) { // Terminal connected @@ -148,15 +147,15 @@ void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { // Invoked when CDC interface received data from host void tud_cdc_rx_cb(uint8_t itf) { - (void) itf; + (void)itf; } //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ void led_blinking_task(void) { - static uint32_t start_ms = 0; - static bool led_state = false; + static uint32_t start_ms = 0; + static bool led_state = false; if (blink_enable) { // Blink every interval ms diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 167385d13..7719790d1 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -106,7 +106,7 @@ 19,18,17,16,15,14,13,12,11,10, \ 9,8,7,6,5,4,3,2,1,0 -// Apply a macro X to each of the arguments with a selected separation/delimiter +// Apply a macro X to each of the arguments with a separation/delimiter #define TU_ARGS_APPLY(_X, _s, ...) TU_XSTRCAT(TU_ARGS_APPLY_, TU_ARGS_NUM(__VA_ARGS__))(_X, _s, __VA_ARGS__) #define TU_ARGS_APPLY_1(_X, _s, _a1) _X(_a1) diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 37d5e89f1..5e1d59233 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -141,7 +141,7 @@ uint32_t tu_edpt_stream_read_xfer(uint8_t hwid, tu_edpt_stream_t* s); // Complete read transfer by writing EP -> FIFO. Must be called in the transfer complete callback TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_read_xfer_complete(tu_edpt_stream_t* s, uint32_t xferred_bytes) { - if (0 != tu_fifo_depth(&s->ff)) { + if (0u != tu_fifo_depth(&s->ff)) { tu_fifo_write_n(&s->ff, s->ep_buf, (uint16_t) xferred_bytes); } } @@ -149,7 +149,7 @@ void tu_edpt_stream_read_xfer_complete(tu_edpt_stream_t* s, uint32_t xferred_byt // Complete read transfer with provided buffer TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_read_xfer_complete_with_buf(tu_edpt_stream_t* s, const void * buf, uint32_t xferred_bytes) { - if (0 != tu_fifo_depth(&s->ff)) { + if (0u != tu_fifo_depth(&s->ff)) { tu_fifo_write_n(&s->ff, buf, (uint16_t) xferred_bytes); } } diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index ffd785384..587554e7f 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -78,7 +78,7 @@ defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) #define TU_BREAKPOINT() do { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if (0 != ((*ARM_CM_DHCSR) & 1UL)) { __asm("BKPT #0\n"); } /* Only halt mcu if debugger is attached */ \ + if (0u != ((*ARM_CM_DHCSR) & 1UL)) { __asm("BKPT #0\n"); } /* Only halt mcu if debugger is attached */ \ } while(0) #elif defined(__riscv) && !TUSB_MCU_VENDOR_ESPRESSIF diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 973bb43cc..c33c970e4 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -920,7 +920,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c // sub millisecond interval p_qhd->interval_ms = 0; p_qhd->int_smask = (interval == 1) ? 0xff : // 0b11111111 - (interval == 2) ? 0xaa /* 0b10101010 */ : 0x44 /* 01000100 */; + (interval == 2) ? 0xaa /* 0b10101010 */ : 0x44 /* 0b01000100 */; } else { p_qhd->interval_ms = (uint8_t) tu_min16(1 << (interval - 4), 255); p_qhd->int_smask = TU_BIT(interval % 8); -- cgit v1.3.1 From 9fac6dd49d9cd681ed9140c124d3001b6d1491be Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 7 Nov 2025 14:04:58 +0700 Subject: fix more alerts found by pvs-studio --- .PVS-Studio/.pvsconfig | 11 +- .clang-format | 5 +- .github/copilot-instructions.md | 24 ++ .../net_lwip_webserver/src/usb_descriptors.c | 251 +++++++++++---------- hw/bsp/imxrt/family.cmake | 3 +- hw/bsp/rp2040/family.c | 4 +- src/class/cdc/cdc_device.c | 23 +- src/class/cdc/cdc_device.h | 13 +- src/class/msc/msc_device.c | 79 ++++--- src/class/msc/msc_host.c | 8 +- src/common/tusb_debug.h | 14 +- src/osal/osal_pico.h | 5 +- 12 files changed, 244 insertions(+), 196 deletions(-) diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index 2cc60722a..a60d6dd2b 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -1,13 +1,14 @@ //V_EXCLUDE_PATH */iar/cxarm* -//V_EXCLUDE_PATH */pico-sdk/ -//V_EXCLUDE_PATH */esp-idf/ -//V_EXCLUDE_PATH */hw/bsp/espressif/components/ -//V_EXCLUDE_PATH */hw/mcu/ +//V_EXCLUDE_PATH */pico-sdk/* +//V_EXCLUDE_PATH */esp-idf/* +//V_EXCLUDE_PATH */hw/mcu/* +//V_EXCLUDE_PATH */hw/bsp/espressif/components/* +//V_EXCLUDE_PATH */lib/* //-V::2506 MISRA. A function should have a single point of exit at the end. //-V::2514 MISRA. Unions should not be used. //-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. -//-V:printf:2547 [MISRA-C-17.7] The return value of non-void function 'printf' should be used. +//-V:memmove:2547 [MISRA-C-17.7] The return value of non-void function 'memmove' should be used. //-V::2584::{gintsts} dwc2 //-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. //+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES diff --git a/.clang-format b/.clang-format index 79a160a8d..c7d769172 100644 --- a/.clang-format +++ b/.clang-format @@ -33,7 +33,8 @@ AllowAllConstructorInitializersOnNextLine: false AllowAllParametersOfDeclarationOnNextLine: false AllowShortBlocksOnASingleLine: Empty AllowShortCaseExpressionOnASingleLine: true -AllowShortCaseLabelsOnASingleLine: true +AllowShortCaseLabelsOnASingleLine: false +AllowShortEnumsOnASingleLine: false AllowShortFunctionsOnASingleLine: None AllowShortIfStatementsOnASingleLine: Never AlwaysBreakTemplateDeclarations: Yes @@ -76,6 +77,8 @@ MacroBlockBegin: '' MacroBlockEnd: '' MaxEmptyLinesToKeep: 2 NamespaceIndentation: All +QualifierAlignment: Custom +QualifierOrder: ['static', 'const', 'volatile', 'restrict', 'type'] ReflowComments: false SpaceAfterTemplateKeyword: false SpaceBeforeRangeBasedForLoopColon: false diff --git a/.github/copilot-instructions.md b/.github/copilot-instructions.md index 9982583cd..9f9ab7e72 100644 --- a/.github/copilot-instructions.md +++ b/.github/copilot-instructions.md @@ -88,6 +88,30 @@ python3 tools/build.py -b BOARD_NAME - Check spelling: `pip install codespell && codespell` (uses `.codespellrc` config) - Pre-commit hooks validate unit tests and code quality automatically +### Static Analysis with PVS-Studio +- **Analyze whole project**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- **Analyze specific source files**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -S path/to/file.c -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- **Multiple specific files**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -S src/file1.c -S src/file2.c -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- Requires `compile_commands.json` in the build directory (generated by CMake with `-DCMAKE_EXPORT_COMPILE_COMMANDS=ON`) +- Use `-f` option to specify path to `compile_commands.json` +- Use `-R .PVS-Studio/.pvsconfig` to specify rule configuration file +- Use `-j12` for parallel analysis with 12 threads +- `--dump-files` saves preprocessed files for debugging +- `--misra-c-version 2023` enables MISRA C:2023 checks +- `--misra-cpp-version 2008` enables MISRA C++:2008 checks +- `--use-old-parser` uses legacy parser for compatibility +- Analysis takes ~10-30 seconds depending on project size. Set timeout to 5+ minutes. +- View results: `plog-converter -a GA:1,2 -t errorfile pvs-report.log` or open in PVS-Studio GUI + ## Validation ### ALWAYS Run These After Making Changes diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 1bc568983..b49962d65 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -24,6 +24,7 @@ */ #include "bsp/board_api.h" +#include "class/net/net_device.h" #include "tusb.h" /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. @@ -32,35 +33,34 @@ * Auto ProductID layout's Bitmap: * [MSB] NET | VENDOR | MIDI | HID | MSC | CDC [LSB] */ -#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ - PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID \ + (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | \ + PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5)) // String Descriptor Index -enum -{ +enum { STRID_LANGID = 0, STRID_MANUFACTURER, STRID_PRODUCT, STRID_SERIAL, STRID_INTERFACE, - STRID_MAC + STRID_MAC, + STRID_COUNT }; -enum -{ +enum { ITF_NUM_CDC = 0, ITF_NUM_CDC_DATA, ITF_NUM_TOTAL }; -enum -{ +enum { #if CFG_TUD_ECM_RNDIS CONFIG_ID_RNDIS = 0, CONFIG_ID_ECM = 1, #else - CONFIG_ID_NCM = 0, + CONFIG_ID_NCM = 0, #endif CONFIG_ID_COUNT }; @@ -68,103 +68,103 @@ enum //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -static tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, +static const tusb_desc_device_t desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, #if CFG_TUD_NCM - .bcdUSB = 0x0201, + .bcdUSB = 0x0201, #else - .bcdUSB = 0x0200, + .bcdUSB = 0x0200, #endif - // Use Interface Association Descriptor (IAD) device class - .bDeviceClass = TUSB_CLASS_MISC, - .bDeviceSubClass = MISC_SUBCLASS_COMMON, - .bDeviceProtocol = MISC_PROTOCOL_IAD, + // Use Interface Association Descriptor (IAD) device class + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0101, + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0101, - .iManufacturer = STRID_MANUFACTURER, - .iProduct = STRID_PRODUCT, - .iSerialNumber = STRID_SERIAL, + .iManufacturer = STRID_MANUFACTURER, + .iProduct = STRID_PRODUCT, + .iSerialNumber = STRID_SERIAL, - .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations + .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations }; // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; +const uint8_t *tud_descriptor_device_cb(void) { + return (const uint8_t *)&desc_device; } //--------------------------------------------------------------------+ // Configuration Descriptor //--------------------------------------------------------------------+ -#define MAIN_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN) -#define ALT_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN) -#define NCM_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_NCM_DESC_LEN) +#define MAIN_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN) +#define ALT_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN) +#define NCM_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_NCM_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX - // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number - // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x82 +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x82 #elif CFG_TUSB_MCU == OPT_MCU_CXD56 - // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number - // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) - #define EPNUM_NET_NOTIF 0x83 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x81 +// CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number +// 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) +#define EPNUM_NET_NOTIF 0x83 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x81 #elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) - // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x83 +// MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h +// e.g EP1 OUT & EP1 IN cannot exist together +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x83 #else - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x82 +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x82 #endif #if CFG_TUD_ECM_RNDIS -static uint8_t const rndis_configuration[] = -{ +static uint8_t const rndis_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS+1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS + 1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_RNDIS_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), + TUD_RNDIS_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), }; -static uint8_t const ecm_configuration[] = -{ +static const uint8_t ecm_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM+1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM + 1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. - TUD_CDC_ECM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), + TUD_CDC_ECM_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, + CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), }; #else -static uint8_t const ncm_configuration[] = -{ +static uint8_t const ncm_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_NCM+1, ITF_NUM_TOTAL, 0, NCM_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_NCM + 1, ITF_NUM_TOTAL, 0, NCM_CONFIG_TOTAL_LEN, 0, 100), // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. - TUD_CDC_NCM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), + TUD_CDC_NCM_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, + CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), }; #endif @@ -173,21 +173,19 @@ static uint8_t const ncm_configuration[] = // - Windows only works with RNDIS // - MacOS only works with CDC-ECM // - Linux will work on both -static uint8_t const * const configuration_arr[2] = -{ +static const uint8_t *const configuration_arr[CONFIG_ID_COUNT] = { #if CFG_TUD_ECM_RNDIS [CONFIG_ID_RNDIS] = rndis_configuration, - [CONFIG_ID_ECM ] = ecm_configuration + [CONFIG_ID_ECM] = ecm_configuration #else - [CONFIG_ID_NCM ] = ncm_configuration + [CONFIG_ID_NCM] = ncm_configuration #endif }; // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +const uint8_t *tud_descriptor_configuration_cb(uint8_t index) { return (index < CONFIG_ID_COUNT) ? configuration_arr[index] : NULL; } @@ -213,81 +211,84 @@ https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/ (Section Microsoft OS compatibility descriptors) */ -#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) +#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) -#define MS_OS_20_DESC_LEN 0xB2 +#define MS_OS_20_DESC_LEN 0xB2 // BOS Descriptor is required for webUSB -uint8_t const desc_bos[] = -{ +const uint8_t desc_bos[] = { // total length, number of device caps TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 1), // Microsoft OS 2.0 descriptor - TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1) -}; + TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1)}; -uint8_t const * tud_descriptor_bos_cb(void) -{ +const uint8_t *tud_descriptor_bos_cb(void) { return desc_bos; } -uint8_t const desc_ms_os_20[] = -{ +const uint8_t desc_ms_os_20[] = { // Set header: length, type, windows version, total length - U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), U16_TO_U8S_LE(MS_OS_20_DESC_LEN), + U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), + U16_TO_U8S_LE(MS_OS_20_DESC_LEN), // Configuration subset header: length, type, configuration index, reserved, configuration total length - U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A), + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A), // Function Subset header: length, type, first interface, reserved, subset length - U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_CDC, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08), + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_CDC, 0, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A - 0x08), // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID - U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'N', 'C', 'M', 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible + U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'N', 'C', 'M', 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible // MS OS 2.0 Registry property descriptor: length, type - U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08-0x08-0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), - U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 - 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, - 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A - 0x08 - 0x08 - 0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), + U16_TO_U8S_LE(0x0007), + U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 + 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, 'r', + 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, U16_TO_U8S_LE(0x0050), // wPropertyDataLength - //bPropertyData: {12345678-0D08-43FD-8B3E-127CA8AFFF9D} - '{', 0x00, '1', 0x00, '2', 0x00, '3', 0x00, '4', 0x00, '5', 0x00, '6', 0x00, '7', 0x00, '8', 0x00, '-', 0x00, - '0', 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, - '8', 0x00, 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, - '8', 0x00, 'A', 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00 -}; + //bPropertyData: {12345678-0D08-43FD-8B3E-127CA8AFFF9D} + '{', 0x00, '1', 0x00, '2', 0x00, '3', 0x00, '4', 0x00, '5', 0x00, '6', 0x00, '7', 0x00, '8', 0x00, '-', 0x00, '0', + 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, '8', 0x00, + 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, '8', 0x00, 'A', + 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00}; TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size"); // Invoked when a control transfer occurred on an interface of this class // Driver response accordingly to the request and the transfer stage (setup/data/ack) // return false to stall control endpoint (e.g unsupported request) -bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const* request) { +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_request_t *request) { // nothing to with DATA & ACK stage - if (stage != CONTROL_STAGE_SETUP) return true; + if (stage != CONTROL_STAGE_SETUP) { + return true; + } switch (request->bmRequestType_bit.type) { case TUSB_REQ_TYPE_VENDOR: - switch (request->bRequest) { + switch (request->bRequest) { //-V2520 //-V2659 case 1: if (request->wIndex == 7) { // Get Microsoft OS 2.0 compatible descriptor uint16_t total_len; memcpy(&total_len, desc_ms_os_20 + 8, 2); - return tud_control_xfer(rhport, request, (void*)(uintptr_t)desc_ms_os_20, total_len); + return tud_control_xfer(rhport, request, (void *)(uintptr_t)desc_ms_os_20, total_len); } else { return false; } - default: break; + default: + break; // nothing to do } break; - default: break; + default: + break; // nothing to do } // stall unknown request @@ -300,26 +301,24 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ //--------------------------------------------------------------------+ // array of pointer to string descriptors -static char const* string_desc_arr [] = -{ - [STRID_LANGID] = (const char[]) { 0x09, 0x04 }, // supported language is English (0x0409) - [STRID_MANUFACTURER] = "TinyUSB", // Manufacturer - [STRID_PRODUCT] = "TinyUSB Device", // Product - [STRID_SERIAL] = NULL, // Serials will use unique ID if possible - [STRID_INTERFACE] = "TinyUSB Network Interface" // Interface Description - - // STRID_MAC index is handled separately +static const char *string_desc_arr[STRID_COUNT] = { + [STRID_LANGID] = (const char[]){0x09, 0x04}, // supported language is English (0x0409) + [STRID_MANUFACTURER] = "TinyUSB", // Manufacturer + [STRID_PRODUCT] = "TinyUSB Device", // Product + [STRID_SERIAL] = NULL, // Serials will use unique ID if possible + [STRID_INTERFACE] = "TinyUSB Network Interface", // Interface Description + [STRID_MAC] = NULL // STRID_MAC index is handled separately }; static uint16_t _desc_str[32 + 1]; // Invoked when received GET STRING DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete -uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { - (void) langid; +const uint16_t *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + (void)langid; unsigned int chr_count = 0; - switch ( index ) { + switch (index) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); chr_count = 1; @@ -331,34 +330,40 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { case STRID_MAC: // Convert MAC address into UTF-16 - for (unsigned i=0; i> 4) & 0xf]; - _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf]; + for (unsigned i = 0; i < sizeof(tud_network_mac_address); i++) { + _desc_str[1 + chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 4) & 0xf]; + _desc_str[1 + chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf]; } break; - default: + default: { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (index >= sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); - size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + + const size_t max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 - for ( size_t i = 0; i < chr_count; i++ ) { + for (size_t i = 0; i < chr_count; i++) { _desc_str[1 + i] = str[i]; } break; + } } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); + _desc_str[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); return _desc_str; } diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 100deba1f..11cc00983 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -56,10 +56,9 @@ function(family_add_board BOARD_TARGET) endif() endforeach() - target_compile_definitions(${BOARD_TARGET} PUBLIC __STARTUP_CLEAR_BSS - CFG_TUSB_MEM_SECTION=__attribute__\(\(section\(\"NonCacheable\"\)\)\) + [=[CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable")))]=] ) if (NOT M4 STREQUAL "1") diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 35e5fc923..a51b3f758 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -105,7 +105,9 @@ static bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); // Note we can't call into any sleep functions in flash right now - for (volatile int i = 0; i < 1000; ++i) {} + for (volatile int i = 0; i < 1000; ++i) { + __nop(); + } // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. // Note the button pulls the pin *low* when pressed. diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 577a92a52..b3253b141 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -270,7 +270,7 @@ uint32_t tud_cdc_n_write_flush(uint8_t itf) { TU_VERIFY(tud_ready(), 0); // Skip if usb is not ready yet // No data to send - if (!tu_fifo_count(&p_cdc->tx_ff)) { + if (0 == tu_fifo_count(&p_cdc->tx_ff)) { return 0; } @@ -279,7 +279,7 @@ uint32_t tud_cdc_n_write_flush(uint8_t itf) { // Pull data from FIFO const uint16_t count = tu_fifo_read_n(&p_cdc->tx_ff, p_epbuf->epin, CFG_TUD_CDC_EP_BUFSIZE); - if (count) { + if (count > 0) { TU_ASSERT(usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_in, p_epbuf->epin, count), 0); return count; } else { @@ -337,15 +337,15 @@ bool cdcd_deinit(void) { #if OSAL_MUTEX_REQUIRED for(uint8_t i=0; irx_ff.mutex_rd; - osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; + const osal_mutex_t mutex_rd = p_cdc->rx_ff.mutex_rd; + const osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; - if (mutex_rd) { + if (mutex_rd != NULL) { osal_mutex_delete(mutex_rd); tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, NULL); } - if (mutex_wr) { + if (mutex_wr != NULL) { osal_mutex_delete(mutex_wr); tu_fifo_config_mutex(&p_cdc->tx_ff, NULL, NULL); } @@ -449,13 +449,15 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } TU_VERIFY(itf < CFG_TUD_CDC); - switch (request->bRequest) { + switch (request->bRequest) { //-V2520 //-V2659 case CDC_REQUEST_SET_LINE_CODING: if (stage == CONTROL_STAGE_SETUP) { TU_LOG_DRV(" Set Line Coding\r\n"); tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); } else if (stage == CONTROL_STAGE_ACK) { tud_cdc_line_coding_cb(itf, &p_cdc->line_coding); + } else { + // nothing to do } break; @@ -491,6 +493,8 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ // Invoke callback tud_cdc_line_state_cb(itf, dtr, rts); + } else { + // nothing to do } break; @@ -500,7 +504,10 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } else if (stage == CONTROL_STAGE_ACK) { TU_LOG_DRV(" Send Break\r\n"); tud_cdc_send_break_cb(itf, request->wValue); + } else { + // nothing to do } + break; default: @@ -558,7 +565,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ if (0 == tud_cdc_n_write_flush(itf)) { // If there is no data left, a ZLP should be sent if // xferred_bytes is multiple of EP Packet size and not zero - if (!tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { + if (0 == tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes > 0 && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { if (usbd_edpt_claim(rhport, p_cdc->ep_in)) { TU_ASSERT(usbd_edpt_xfer(rhport, p_cdc->ep_in, NULL, 0)); } diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index c321f3d16..f30f93bc6 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -53,15 +53,16 @@ // Driver Configuration //--------------------------------------------------------------------+ typedef struct TU_ATTR_PACKED { - uint8_t rx_persistent : 1; // keep rx fifo data even with bus reset or disconnect - uint8_t tx_persistent : 1; // keep tx fifo data even with reset or disconnect - uint8_t tx_overwritabe_if_not_connected : 1; // if not connected, tx fifo can be overwritten + bool rx_persistent : 1; // keep rx fifo data even with bus reset or disconnect + bool tx_persistent : 1; // keep tx fifo data even with reset or disconnect + bool tx_overwritabe_if_not_connected : 1; // if not connected, tx fifo can be overwritten } tud_cdc_configure_t; +TU_VERIFY_STATIC(sizeof(tud_cdc_configure_t) == 1, "size is not correct"); #define TUD_CDC_CONFIGURE_DEFAULT() { \ - .rx_persistent = 0, \ - .tx_persistent = 0, \ - .tx_overwritabe_if_not_connected = 1, \ + .rx_persistent = false, \ + .tx_persistent = false, \ + .tx_overwritabe_if_not_connected = false, \ } // Configure CDC driver behavior diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index b0eafd5da..4ba34c7dc 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -83,7 +83,7 @@ typedef struct { uint8_t add_sense_code; uint8_t add_sense_qualifier; - uint8_t pending_io; // pending async IO + bool pending_io; // pending async IO }mscd_interface_t; static mscd_interface_t _mscd_itf; @@ -92,6 +92,8 @@ CFG_TUD_MEM_SECTION static struct { TUD_EPBUF_DEF(buf, CFG_TUD_MSC_EP_BUFSIZE); } _mscd_epbuf; +TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE >= 64, "CFG_TUD_MSC_EP_BUFSIZE must be at least 64"); + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ @@ -107,16 +109,16 @@ TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) { return tu_bit_test(dir, 7); } -static inline bool send_csw(mscd_interface_t* p_msc) { +TU_ATTR_ALWAYS_INLINE static inline bool send_csw(mscd_interface_t* p_msc) { // Data residue is always = host expect - actual transferred uint8_t rhport = p_msc->rhport; p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; p_msc->stage = MSC_STAGE_STATUS_SENT; - memcpy(_mscd_epbuf.buf, &p_msc->csw, sizeof(msc_csw_t)); + memcpy(_mscd_epbuf.buf, (uint8_t*) &p_msc->csw, sizeof(msc_csw_t)); //-V1086 return usbd_edpt_xfer(rhport, p_msc->ep_in , _mscd_epbuf.buf, sizeof(msc_csw_t)); } -static inline bool prepare_cbw(mscd_interface_t* p_msc) { +TU_ATTR_ALWAYS_INLINE static inline bool prepare_cbw(mscd_interface_t* p_msc) { uint8_t rhport = p_msc->rhport; p_msc->stage = MSC_STAGE_CMD; return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t)); @@ -133,7 +135,7 @@ static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { // failed but sense key is not set: default to Illegal Request if (p_msc->sense_key == 0) { - tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + (void) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); } // If there is data stage and not yet complete, stall it @@ -146,18 +148,18 @@ static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { } } -static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { +TU_ATTR_ALWAYS_INLINE static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { // use offsetof to avoid pointer to the odd/unaligned address const uint32_t lba = tu_unaligned_read32(command + offsetof(scsi_write10_t, lba)); return tu_ntohl(lba); // lba is in Big Endian } -static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { uint16_t const block_count = tu_unaligned_read16(cbw->command + offsetof(scsi_write10_t, block_count)); return tu_ntohs(block_count); } -static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { // first extract block count in the command uint16_t const block_count = rdwr10_get_blockcount(cbw); if (block_count == 0) { @@ -171,7 +173,7 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { uint16_t const block_count = rdwr10_get_blockcount(cbw); if (cbw->total_bytes == 0) { - if (block_count) { + if (block_count > 0) { TU_LOG_DRV(" SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } else { @@ -190,6 +192,8 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { } else if (cbw->total_bytes / block_count == 0) { TU_LOG_DRV(" Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; + } else { + // nothing to do } } @@ -309,7 +313,7 @@ bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, u TU_ATTR_ALWAYS_INLINE static inline void set_sense_medium_not_present(uint8_t lun) { // default sense is NOT READY, MEDIUM NOT PRESENT - tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); + (void) tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); } static void proc_async_io_done(void *bytes_io) { @@ -318,7 +322,7 @@ static void proc_async_io_done(void *bytes_io) { const int32_t nbytes = (int32_t) (intptr_t) bytes_io; const uint8_t cmd = p_msc->cbw.command[0]; - p_msc->pending_io = 0; + p_msc->pending_io = false; switch (cmd) { case SCSI_CMD_READ_10: proc_read_io_data(p_msc, nbytes); @@ -328,7 +332,7 @@ static void proc_async_io_done(void *bytes_io) { proc_write_io_data(p_msc, (uint32_t) nbytes, nbytes); break; - default: break; + default: break; // nothing to do } // send status if stage is transitioned to STATUS @@ -429,6 +433,8 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t TU_ASSERT(prepare_cbw(p_msc)); } } + } else { + // nothing to do } } @@ -438,7 +444,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t // From this point only handle class request only TU_VERIFY(request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS); - switch ( request->bRequest ) { + switch (request->bRequest) { //-V2520 //-V2659 case MSC_REQ_RESET: TU_LOG_DRV(" MSC BOT Reset\r\n"); TU_VERIFY(request->wValue == 0 && request->wLength == 0); @@ -451,7 +457,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t TU_VERIFY(request->wValue == 0 && request->wLength == 1); uint8_t maxlun = tud_msc_get_maxlun_cb(); - TU_VERIFY(maxlun); + TU_VERIFY(maxlun != 0); maxlun--; // MAX LUN is minus 1 by specs tud_control_xfer(rhport, request, &maxlun, 1); break; @@ -510,7 +516,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if (status != MSC_CSW_STATUS_PASSED) { fail_scsi_op(p_msc, status); - } else if (p_cbw->total_bytes) { + } else if (p_cbw->total_bytes > 0) { if (SCSI_CMD_READ_10 == p_cbw->command[0]) { proc_read10_cmd(p_msc); } else { @@ -547,7 +553,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t TU_LOG_DRV(" SCSI unsupported or failed command\r\n"); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else if (resplen == 0) { - if (p_cbw->total_bytes) { + if (p_cbw->total_bytes > 0) { // 6.7 The 13 Cases: case 4 (Hi > Dn) // TU_LOG_DRV(" SCSI case 4 (Hi > Dn): %lu\r\n", p_cbw->total_bytes); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); @@ -647,7 +653,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } break; - default: break; + default: break; // nothing to do } if (p_msc->stage == MSC_STAGE_STATUS) { @@ -683,9 +689,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } break; - case SCSI_CMD_START_STOP_UNIT: + case SCSI_CMD_START_STOP_UNIT: { resplen = 0; - scsi_start_stop_unit_t const* start_stop = (scsi_start_stop_unit_t const*)scsi_cmd; if (!tud_msc_start_stop_cb(lun, start_stop->power_condition, start_stop->start, start_stop->load_eject)) { // Failed status response @@ -697,10 +702,10 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } } break; + } - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: { resplen = 0; - scsi_prevent_allow_medium_removal_t const* prevent_allow = (scsi_prevent_allow_medium_removal_t const*)scsi_cmd; if (!tud_msc_prevent_allow_medium_removal_cb(lun, prevent_allow->prohibit_removal, prevent_allow->control)) { // Failed status response @@ -712,7 +717,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } } break; - + } case SCSI_CMD_READ_CAPACITY_10: { uint32_t block_count; @@ -740,8 +745,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(read_capa10); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &read_capa10, (size_t) resplen)); } + break; } - break; case SCSI_CMD_READ_FORMAT_CAPACITY: { scsi_read_format_capacity_data_t read_fmt_capa = { @@ -772,8 +777,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(read_fmt_capa); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &read_fmt_capa, (size_t) resplen)); } + break; } - break; case SCSI_CMD_INQUIRY: { scsi_inquiry_resp_t *inquiry_rsp = (scsi_inquiry_resp_t *) buffer; @@ -789,8 +794,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ tud_msc_inquiry_cb(lun, inquiry_rsp->vendor_id, inquiry_rsp->product_id, inquiry_rsp->product_rev); resplen = sizeof(scsi_inquiry_resp_t); } + break; } - break; case SCSI_CMD_MODE_SENSE_6: { scsi_mode_sense6_resp_t mode_resp = { @@ -807,8 +812,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(mode_resp); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &mode_resp, (size_t) resplen)); + break; } - break; case SCSI_CMD_REQUEST_SENSE: { scsi_sense_fixed_resp_t sense_rsp = { @@ -828,9 +833,9 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = tud_msc_request_sense_cb(lun, buffer, (uint16_t)bufsize); // Clear sense data after copy - tud_msc_set_sense(lun, 0, 0, 0); + (void) tud_msc_set_sense(lun, 0, 0, 0); + break; } - break; default: resplen = -1; break; @@ -842,6 +847,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ static void proc_read10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero + TU_VERIFY(block_sz != 0, ); // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); uint32_t const offset = p_msc->xferred_len % block_sz; @@ -849,10 +855,10 @@ static void proc_read10_cmd(mscd_interface_t* p_msc) { // remaining bytes capped at class buffer int32_t nbytes = (int32_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len); - p_msc->pending_io = 1; + p_msc->pending_io = true; nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, (uint32_t)nbytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->pending_io = 0; + p_msc->pending_io = false; proc_read_io_data(p_msc, nbytes); } } @@ -876,19 +882,19 @@ static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes) { dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false); break; - default: break; + default: break; // nothing to do } } } static void proc_write10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; - bool writable = tud_msc_is_writable_cb(p_cbw->lun); + const bool writable = tud_msc_is_writable_cb(p_cbw->lun); if (!writable) { // Not writable, complete this SCSI op with error // Sense = Write protected - tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); + (void) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); return; } @@ -903,15 +909,16 @@ static void proc_write10_cmd(mscd_interface_t* p_msc) { static void proc_write10_host_data(mscd_interface_t* p_msc, uint32_t xferred_bytes) { msc_cbw_t const* p_cbw = &p_msc->cbw; uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero + TU_VERIFY(block_sz != 0, ); // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); uint32_t const offset = p_msc->xferred_len % block_sz; - p_msc->pending_io = 1; + p_msc->pending_io = true; int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->pending_io = 0; + p_msc->pending_io = false; proc_write_io_data(p_msc, xferred_bytes, nbytes); } } @@ -927,7 +934,7 @@ static void proc_write_io_data(mscd_interface_t* p_msc, uint32_t xferred_bytes, fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); break; - default: break; + default: break; // nothing to do } } else { if ((uint32_t)nbytes < xferred_bytes) { diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index eb69ae400..5aa27c196 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -191,7 +191,7 @@ bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* respons .cmd_code = SCSI_CMD_INQUIRY, .alloc_length = sizeof(scsi_inquiry_resp_t) }; - memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); + memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } @@ -225,7 +225,7 @@ bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void* response, .cmd_code = SCSI_CMD_REQUEST_SENSE, .alloc_length = 18 }; - memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); + memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } @@ -247,7 +247,7 @@ bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void* buffer, uint32_t lba, u .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_read10, cbw.cmd_len); + memcpy(cbw.command, &cmd_read10, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, buffer, complete_cb, arg); } @@ -269,7 +269,7 @@ bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const* buffer, uint32_t .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_write10, cbw.cmd_len); + memcpy(cbw.command, &cmd_write10, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, (void*) (uintptr_t) buffer, complete_cb, arg); } diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index a7bf3e959..905dc239c 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -61,9 +61,9 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); TU_ATTR_ALWAYS_INLINE static inline void tu_print_buf(uint8_t const* buf, uint32_t bufsize) { for(uint32_t i=0; i= 2 diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index ace5907d7..f5385071a 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -81,8 +81,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { (void) in_isr; - sem_release(sem_hdl); - return true; + return sem_release(sem_hdl); } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { @@ -139,7 +138,7 @@ typedef osal_queue_def_t* osal_queue_t; TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { critical_section_init(&qdef->critsec); - tu_fifo_clear(&qdef->ff); + (void) tu_fifo_clear(&qdef->ff); return (osal_queue_t) qdef; } -- cgit v1.3.1 From 5d351828cbb077e41463a31d285ca001250e85da Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Fri, 7 Nov 2025 16:31:17 +0700 Subject: Apply suggestions from code review Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- src/class/cdc/cdc_device.h | 2 +- src/class/msc/msc_device.c | 2 +- src/common/tusb_debug.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index f30f93bc6..6f21af4f3 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -62,7 +62,7 @@ TU_VERIFY_STATIC(sizeof(tud_cdc_configure_t) == 1, "size is not correct"); #define TUD_CDC_CONFIGURE_DEFAULT() { \ .rx_persistent = false, \ .tx_persistent = false, \ - .tx_overwritabe_if_not_connected = false, \ + .tx_overwritabe_if_not_connected = true, \ } // Configure CDC driver behavior diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 4ba34c7dc..244251c5e 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -114,7 +114,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool send_csw(mscd_interface_t* p_msc) { uint8_t rhport = p_msc->rhport; p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; p_msc->stage = MSC_STAGE_STATUS_SENT; - memcpy(_mscd_epbuf.buf, (uint8_t*) &p_msc->csw, sizeof(msc_csw_t)); //-V1086 + memcpy(_mscd_epbuf.buf, &p_msc->csw, sizeof(msc_csw_t)); //-V1086 return usbd_edpt_xfer(rhport, p_msc->ep_in , _mscd_epbuf.buf, sizeof(msc_csw_t)); } diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 905dc239c..08117283f 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -76,7 +76,7 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_print_buf(uint8_t const* buf, uint32 #define TU_LOG_FAILED() (void) tu_printf("%s: %d: Failed\r\n", __PRETTY_FUNCTION__, __LINE__) // Log Level 1: Error -#define TU_LOG1 (void) tu_printf +#define TU_LOG1(...) (void) tu_printf(__VA_ARGS__) #define TU_LOG1_MEM tu_print_mem #define TU_LOG1_BUF(_x, _n) tu_print_buf((uint8_t const*)(_x), _n) #define TU_LOG1_INT(_x) (void) tu_printf(#_x " = %ld\r\n", (unsigned long) (_x) ) -- cgit v1.3.1 From 58f29518a8cdb776e7e54700d0133eb44863fdf4 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 7 Nov 2025 12:18:15 +0100 Subject: Fixup Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 26 +++++++++++++------------- src/class/audio/audio_device.h | 12 ++++++------ 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 983faf8ec..b8e04a182 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -217,7 +217,7 @@ typedef struct uint16_t ep_in_sz; // Current size of TX EP uint8_t ep_in_as_intf_num;// Corresponding Standard AS Interface Descriptor (4.9.1) belonging to output terminal to which this EP belongs - 0 is invalid (this fits to UAC2 specification since AS interfaces can not have interface number equal to zero) uint8_t ep_in_alt; // Current alternate setting of TX EP - uint16_t ep_in_target_fifo_size;// Target size for the EP IN FIFO. + uint16_t ep_in_fifo_threshold;// Target size for the EP IN FIFO. #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT @@ -456,7 +456,7 @@ static inline uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t const *p_desc); static bool audiod_calc_tx_packet_sz(audiod_function_t *audio); -static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t target_fifo_size, uint16_t max_size); +static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t fifo_threshold, uint16_t max_size); #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -550,14 +550,14 @@ tu_fifo_t *tud_audio_n_get_ep_in_ff(uint8_t func_id) { return NULL; } -uint16_t tud_audio_n_get_ep_in_target_fifo_size(uint8_t func_id) { - if (func_id < CFG_TUD_AUDIO) return _audiod_fct[func_id].ep_in_target_fifo_size; +uint16_t tud_audio_n_get_ep_in_fifo_threshold(uint8_t func_id) { + if (func_id < CFG_TUD_AUDIO) return _audiod_fct[func_id].ep_in_fifo_threshold; return 0; } -void tud_audio_n_set_ep_in_target_fifo_size(uint8_t func_id, uint16_t target_fifo_size) { - if (func_id < CFG_TUD_AUDIO && target_fifo_size < _audiod_fct[func_id].ep_in_ff.depth) { - _audiod_fct[func_id].ep_in_target_fifo_size = target_fifo_size; +void tud_audio_n_set_ep_in_fifo_threshold(uint8_t func_id, uint16_t threshold) { + if (func_id < CFG_TUD_AUDIO && threshold < _audiod_fct[func_id].ep_in_ff.depth) { + _audiod_fct[func_id].ep_in_fifo_threshold = threshold; } } @@ -572,7 +572,7 @@ static bool audiod_tx_xfer_isr(uint8_t rhport, audiod_function_t * audio, uint16 #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL // packet_sz_tx is based on total packet size, here we want size for each support buffer. - n_bytes_tx = audiod_tx_packet_size(audio->packet_sz_tx, tu_fifo_count(&audio->ep_in_ff), audio->ep_in_ff.depth, audio->ep_in_target_fifo_size, audio->ep_in_sz); + n_bytes_tx = audiod_tx_packet_size(audio->packet_sz_tx, tu_fifo_count(&audio->ep_in_ff), audio->ep_in_ff.depth, audio->ep_in_fifo_threshold, audio->ep_in_sz); #else n_bytes_tx = tu_min16(tu_fifo_count(&audio->ep_in_ff), audio->ep_in_sz);// Limit up to max packet size, more can not be done for ISO #endif @@ -1209,8 +1209,8 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p audio->ep_in_as_intf_num = itf; audio->ep_in_alt = alt; audio->ep_in_sz = tu_edpt_packet_size(desc_ep); - // Set the default EP IN target size to half the fifo depth. - audio->ep_in_target_fifo_size = audio->ep_in_ff.depth / 2; + // Set the default EP IN FIFO threshold to half fifo depth. + audio->ep_in_fifo_threshold = audio->ep_in_ff.depth / 2; // If flow control is enabled, parse for the corresponding parameters - doing this here means only AS interfaces with EPs get scanned for parameters #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL @@ -1875,7 +1875,7 @@ static bool audiod_calc_tx_packet_sz(audiod_function_t *audio) { return true; } -static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t target_fifo_size, uint16_t max_depth) { +static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t fifo_threshold, uint16_t max_depth) { // Flow control need a FIFO size of at least 4*Navg if (norminal_size[1] && norminal_size[1] <= fifo_depth * 4) { // Use blackout to prioritize normal size packet @@ -1885,10 +1885,10 @@ static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t da if (data_count < norminal_size[0]) { // If you get here frequently, then your I2S clock deviation is too big ! packet_size = 0; - } else if (data_count < (target_fifo_size - slot_size) - slot_size && !ctrl_blackout) { + } else if (data_count < (fifo_threshold - slot_size) && !ctrl_blackout) { packet_size = norminal_size[0]; ctrl_blackout = 10; - } else if (data_count > (target_fifo_size - slot_size) + slot_size && !ctrl_blackout) { + } else if (data_count > (fifo_threshold + slot_size) && !ctrl_blackout) { packet_size = norminal_size[2]; if (norminal_size[0] == norminal_size[1]) { // nav > INT(nav), eg. 44.1k, 88.2k diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 69d9fb7bb..ab3684aad 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -188,8 +188,8 @@ tu_fifo_t* tud_audio_n_get_ep_out_ff (uint8_t func_id); uint16_t tud_audio_n_write (uint8_t func_id, const void * data, uint16_t len); bool tud_audio_n_clear_ep_in_ff (uint8_t func_id); tu_fifo_t* tud_audio_n_get_ep_in_ff (uint8_t func_id); -uint16_t tud_audio_n_get_ep_in_target_fifo_size(uint8_t func_id); -void tud_audio_n_set_ep_in_target_fifo_size(uint8_t func_id, uint16_t target_fifo_size); +uint16_t tud_audio_n_get_ep_in_fifo_threshold(uint8_t func_id); +void tud_audio_n_set_ep_in_fifo_threshold(uint8_t func_id, uint16_t threshold); #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP @@ -426,14 +426,14 @@ TU_ATTR_ALWAYS_INLINE static inline tu_fifo_t* tud_audio_get_ep_in_ff(void) { return tud_audio_n_get_ep_in_ff(0); } -TU_ATTR_ALWAYS_INLINE static inline uint16_t tud_audio_get_ep_in_target_fifo_size(void) +TU_ATTR_ALWAYS_INLINE static inline uint16_t tud_audio_get_ep_in_fifo_threshold(void) { - return tud_audio_n_get_ep_in_target_fifo_size(0); + return tud_audio_n_get_ep_in_fifo_threshold(0); } -TU_ATTR_ALWAYS_INLINE static inline void tud_audio_set_ep_in_target_fifo_size(uint16_t target_fifo_size) +TU_ATTR_ALWAYS_INLINE static inline void tud_audio_set_ep_in_fifo_threshold(uint16_t threshold) { - tud_audio_n_set_ep_in_target_fifo_size(0, target_fifo_size); + tud_audio_n_set_ep_in_fifo_threshold(0, threshold); } #endif -- cgit v1.3.1 From 239ed48e22863cbcd781a5c70080ed93a4839d4b Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 7 Nov 2025 12:48:32 +0100 Subject: Cleanup Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index b8e04a182..328f085a8 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -270,10 +270,6 @@ typedef struct uint16_t packet_sz_tx[3]; uint8_t bclock_id_tx; uint8_t interval_tx; -#endif - -// Encoding parameters - parameters are set when alternate AS interface is set by host -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL uint8_t format_type_tx; uint8_t n_channels_tx; uint8_t n_bytes_per_sample_tx; @@ -642,19 +638,6 @@ static inline bool audiod_fb_send(uint8_t func_id) { *audio->fb_buf = audio->feedback.value; } - // About feedback format on FS - // - // 3 variables: Format | packetSize | sendSize | Working OS: - // 16.16 4 4 Linux, Windows - // 16.16 4 3 Linux - // 16.16 3 4 Linux - // 16.16 3 3 Linux - // 10.14 4 4 Linux - // 10.14 4 3 Linux - // 10.14 3 4 Linux, OSX - // 10.14 3 3 Linux, OSX - // - // We send 3 bytes since sending packet larger than wMaxPacketSize is pretty ugly return usbd_edpt_xfer(audio->rhport, audio->ep_fb, (uint8_t *) audio->fb_buf, uac_version == 1 ? 3 : 4); } -- cgit v1.3.1 From 4fcce0fbc909038f5328f5ad01d6bfa641181e65 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 7 Nov 2025 13:19:33 +0100 Subject: Implement RX FIFO threshold adjustment Signed-off-by: HiFiPhile --- examples/device/uac2_speaker_fb/src/main.c | 23 ++++++++++++++++------- src/class/audio/audio_device.c | 14 +++++++------- src/class/audio/audio_device.h | 8 +++++--- 3 files changed, 28 insertions(+), 17 deletions(-) diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index f2cfb155e..7b4e2d64c 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -35,13 +35,6 @@ // MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ -// List of supported sample rates for UAC2 -const uint32_t sample_rates[] = {44100, 48000, 88200, 96000}; - -#define N_SAMPLE_RATES TU_ARRAY_SIZE(sample_rates) - -uint32_t current_sample_rate = 44100; - /* Blink pattern * - 25 ms : streaming data * - 250 ms : device not mounted @@ -76,6 +69,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; // Current states uint8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1];// +1 for master channel 0 +uint32_t current_sample_rate = 44100; // Buffer for speaker data uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ / 2]; @@ -316,6 +310,10 @@ static bool audio10_get_req_entity(uint8_t rhport, tusb_control_request_t const //--------------------------------------------------------------------+ #if TUD_OPT_HIGH_SPEED +// List of supported sample rates for UAC2 +const uint32_t sample_rates[] = {44100, 48000, 88200, 96000}; + +#define N_SAMPLE_RATES TU_ARRAY_SIZE(sample_rates) static bool audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); @@ -548,6 +546,17 @@ void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, audio_feedba // Set feedback method to fifo counting feedback_param->method = AUDIO_FEEDBACK_METHOD_FIFO_COUNT; feedback_param->sample_freq = current_sample_rate; + + // About FIFO threshold: + // + // By default the threshold is set to half FIFO size, which works well in most cases, + // you can reduce the threshold to have less latency. + // + // For example, here we could set the threshold to 2 ms of audio data, as audio_task() read audio data every 1 ms, + // having 2 ms threshold allows some margin and a quick response: + // + // feedback_param->fifo_count.fifo_threshold = + // current_sample_rate * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX / 1000 * 2; } #if CFG_AUDIO_DEBUG diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 328f085a8..32fc4d076 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -1546,7 +1546,7 @@ static bool audiod_fb_params_prepare(uint8_t func_id, uint8_t alt) { // Prepare feedback computation if endpoint is available if (audio->ep_fb != 0) { - audio_feedback_params_t fb_param; + audio_feedback_params_t fb_param = {0}; tud_audio_feedback_params_cb(func_id, alt, &fb_param); audio->feedback.compute_method = fb_param.method; @@ -1587,15 +1587,15 @@ static bool audiod_fb_params_prepare(uint8_t func_id, uint8_t alt) { } break; case AUDIO_FEEDBACK_METHOD_FIFO_COUNT: { - // Initialize the threshold level to half filled - uint16_t fifo_lvl_thr = tu_fifo_depth(&audio->ep_out_ff) / 2; - audio->feedback.compute.fifo_count.fifo_lvl_thr = fifo_lvl_thr; - audio->feedback.compute.fifo_count.fifo_lvl_avg = ((uint32_t) fifo_lvl_thr) << 16; + // Determine FIFO threshold + uint16_t fifo_threshold = fb_param.fifo_count.fifo_threshold ? fb_param.fifo_count.fifo_threshold : tu_fifo_depth(&audio->ep_out_ff) / 2; + audio->feedback.compute.fifo_count.fifo_lvl_thr = fifo_threshold; + audio->feedback.compute.fifo_count.fifo_lvl_avg = ((uint32_t) fifo_threshold) << 16; // Avoid 64bit division uint32_t nominal = ((fb_param.sample_freq / 100) << 16) / (frame_div / 100); audio->feedback.compute.fifo_count.nom_value = nominal; - audio->feedback.compute.fifo_count.rate_const[0] = (uint16_t) ((audio->feedback.max_value - nominal) / fifo_lvl_thr); - audio->feedback.compute.fifo_count.rate_const[1] = (uint16_t) ((nominal - audio->feedback.min_value) / fifo_lvl_thr); + audio->feedback.compute.fifo_count.rate_const[0] = (uint16_t) ((audio->feedback.max_value - nominal) / fifo_threshold); + audio->feedback.compute.fifo_count.rate_const[1] = (uint16_t) ((nominal - audio->feedback.min_value) / fifo_threshold); // On HS feedback is more sensitive since packet size can vary every MSOF, could cause instability if (tud_speed_get() == TUSB_SPEED_HIGH) { audio->feedback.compute.fifo_count.rate_const[0] /= 8; diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index ab3684aad..1e0c46915 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -333,10 +333,12 @@ typedef struct { union { struct { uint32_t mclk_freq; // Main clock frequency in Hz i.e. master clock to which sample clock is based on - }frequency; - + } frequency; + struct { + uint16_t fifo_threshold; // Target FIFO threshold level, default to half FIFO if not set + } fifo_count; }; -}audio_feedback_params_t; +} audio_feedback_params_t; // Invoked when needed to set feedback parameters void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, audio_feedback_params_t* feedback_param); -- cgit v1.3.1 From f188a400ec4076a289923f2add2aadac6d38f0ce Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 7 Nov 2025 14:42:40 +0100 Subject: Typo Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 32fc4d076..23b551021 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -452,7 +452,7 @@ static inline uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t const *p_desc); static bool audiod_calc_tx_packet_sz(audiod_function_t *audio); -static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t fifo_threshold, uint16_t max_size); +static uint16_t audiod_tx_packet_size(const uint16_t *nominal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t fifo_threshold, uint16_t max_size); #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -1858,22 +1858,22 @@ static bool audiod_calc_tx_packet_sz(audiod_function_t *audio) { return true; } -static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t fifo_threshold, uint16_t max_depth) { +static uint16_t audiod_tx_packet_size(const uint16_t *nominal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t fifo_threshold, uint16_t max_depth) { // Flow control need a FIFO size of at least 4*Navg - if (norminal_size[1] && norminal_size[1] <= fifo_depth * 4) { + if (nominal_size[1] && nominal_size[1] <= fifo_depth * 4) { // Use blackout to prioritize normal size packet static int ctrl_blackout = 0; uint16_t packet_size; - uint16_t slot_size = norminal_size[2] - norminal_size[1]; - if (data_count < norminal_size[0]) { + uint16_t slot_size = nominal_size[2] - nominal_size[1]; + if (data_count < nominal_size[0]) { // If you get here frequently, then your I2S clock deviation is too big ! packet_size = 0; } else if (data_count < (fifo_threshold - slot_size) && !ctrl_blackout) { - packet_size = norminal_size[0]; + packet_size = nominal_size[0]; ctrl_blackout = 10; } else if (data_count > (fifo_threshold + slot_size) && !ctrl_blackout) { - packet_size = norminal_size[2]; - if (norminal_size[0] == norminal_size[1]) { + packet_size = nominal_size[2]; + if (nominal_size[0] == nominal_size[1]) { // nav > INT(nav), eg. 44.1k, 88.2k ctrl_blackout = 0; } else { @@ -1881,7 +1881,7 @@ static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t da ctrl_blackout = 10; } } else { - packet_size = norminal_size[1]; + packet_size = nominal_size[1]; if (ctrl_blackout) { ctrl_blackout--; } -- cgit v1.3.1 From 652342b57b129a79e0df152377d18096e4a0fed5 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 7 Nov 2025 14:04:58 +0700 Subject: fix more alerts found by pvs-studio --- .PVS-Studio/.pvsconfig | 13 +- .clang-format | 5 +- .github/copilot-instructions.md | 24 ++ examples/device/mtp/src/mtp_fs_example.c | 4 +- .../net_lwip_webserver/src/usb_descriptors.c | 249 +++++++++++---------- hw/bsp/imxrt/family.cmake | 3 +- hw/bsp/rp2040/family.c | 4 +- src/class/cdc/cdc_device.c | 21 +- src/class/cdc/cdc_device.h | 13 +- src/class/msc/msc_device.c | 79 ++++--- src/class/msc/msc_host.c | 22 +- src/common/tusb_debug.h | 14 +- src/device/usbd.c | 10 +- src/host/hcd.h | 2 +- src/host/usbh.c | 112 ++++----- src/osal/osal_pico.h | 5 +- 16 files changed, 317 insertions(+), 263 deletions(-) diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index 2cc60722a..d8654b077 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -1,14 +1,17 @@ //V_EXCLUDE_PATH */iar/cxarm* -//V_EXCLUDE_PATH */pico-sdk/ -//V_EXCLUDE_PATH */esp-idf/ -//V_EXCLUDE_PATH */hw/bsp/espressif/components/ -//V_EXCLUDE_PATH */hw/mcu/ +//V_EXCLUDE_PATH */pico-sdk/* +//V_EXCLUDE_PATH */esp-idf/* +//V_EXCLUDE_PATH */hw/mcu/* +//V_EXCLUDE_PATH */hw/bsp/espressif/components/* +//V_EXCLUDE_PATH */lib/* //-V::2506 MISRA. A function should have a single point of exit at the end. //-V::2514 MISRA. Unions should not be used. +//-V::2520 [MISRA-C-16.3] Every switch-clause should be terminated by an unconditional 'break' statement //-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. -//-V:printf:2547 [MISRA-C-17.7] The return value of non-void function 'printf' should be used. +//-V:memmove:2547 [MISRA-C-17.7] The return value of non-void function 'memmove' should be used. //-V::2584::{gintsts} dwc2 //-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. //+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES //-V:memcpy:2628 Pointer arguments to the 'memcpy' function should be pointers to qualified or unqualified versions of compatible types. +//-V::2659 [MISRA-C-16.1] Switch statements should be well-formed. Every switch-clause should be terminated by an unconditional 'break' statement diff --git a/.clang-format b/.clang-format index 79a160a8d..c7d769172 100644 --- a/.clang-format +++ b/.clang-format @@ -33,7 +33,8 @@ AllowAllConstructorInitializersOnNextLine: false AllowAllParametersOfDeclarationOnNextLine: false AllowShortBlocksOnASingleLine: Empty AllowShortCaseExpressionOnASingleLine: true -AllowShortCaseLabelsOnASingleLine: true +AllowShortCaseLabelsOnASingleLine: false +AllowShortEnumsOnASingleLine: false AllowShortFunctionsOnASingleLine: None AllowShortIfStatementsOnASingleLine: Never AlwaysBreakTemplateDeclarations: Yes @@ -76,6 +77,8 @@ MacroBlockBegin: '' MacroBlockEnd: '' MaxEmptyLinesToKeep: 2 NamespaceIndentation: All +QualifierAlignment: Custom +QualifierOrder: ['static', 'const', 'volatile', 'restrict', 'type'] ReflowComments: false SpaceAfterTemplateKeyword: false SpaceBeforeRangeBasedForLoopColon: false diff --git a/.github/copilot-instructions.md b/.github/copilot-instructions.md index 9982583cd..9f9ab7e72 100644 --- a/.github/copilot-instructions.md +++ b/.github/copilot-instructions.md @@ -88,6 +88,30 @@ python3 tools/build.py -b BOARD_NAME - Check spelling: `pip install codespell && codespell` (uses `.codespellrc` config) - Pre-commit hooks validate unit tests and code quality automatically +### Static Analysis with PVS-Studio +- **Analyze whole project**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- **Analyze specific source files**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -S path/to/file.c -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- **Multiple specific files**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -S src/file1.c -S src/file2.c -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- Requires `compile_commands.json` in the build directory (generated by CMake with `-DCMAKE_EXPORT_COMPILE_COMMANDS=ON`) +- Use `-f` option to specify path to `compile_commands.json` +- Use `-R .PVS-Studio/.pvsconfig` to specify rule configuration file +- Use `-j12` for parallel analysis with 12 threads +- `--dump-files` saves preprocessed files for debugging +- `--misra-c-version 2023` enables MISRA C:2023 checks +- `--misra-cpp-version 2008` enables MISRA C++:2008 checks +- `--use-old-parser` uses legacy parser for compatibility +- Analysis takes ~10-30 seconds depending on project size. Set timeout to 5+ minutes. +- View results: `plog-converter -a GA:1,2 -t errorfile pvs-report.log` or open in PVS-Studio GUI + ## Validation ### ALWAYS Run These After Making Changes diff --git a/examples/device/mtp/src/mtp_fs_example.c b/examples/device/mtp/src/mtp_fs_example.c index 1c287be4d..7fd7db61b 100644 --- a/examples/device/mtp/src/mtp_fs_example.c +++ b/examples/device/mtp/src/mtp_fs_example.c @@ -414,7 +414,7 @@ static int32_t fs_get_device_properties(tud_mtp_cb_data_t* cb_data) { // get describing dataset mtp_device_prop_desc_header_t device_prop_header; device_prop_header.device_property_code = dev_prop_code; - switch (dev_prop_code) { //-V2520 //-V2659 + switch (dev_prop_code) { case MTP_DEV_PROP_DEVICE_FRIENDLY_NAME: device_prop_header.datatype = MTP_DATA_TYPE_STR; device_prop_header.get_set = MTP_MODE_GET; @@ -430,7 +430,7 @@ static int32_t fs_get_device_properties(tud_mtp_cb_data_t* cb_data) { } } else { // get value - switch (dev_prop_code) { //-V2520 //-V2659 + switch (dev_prop_code) { case MTP_DEV_PROP_DEVICE_FRIENDLY_NAME: (void) mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); tud_mtp_data_send(io_container); diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 1bc568983..c976cb62b 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -24,6 +24,7 @@ */ #include "bsp/board_api.h" +#include "class/net/net_device.h" #include "tusb.h" /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. @@ -32,35 +33,34 @@ * Auto ProductID layout's Bitmap: * [MSB] NET | VENDOR | MIDI | HID | MSC | CDC [LSB] */ -#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ - PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID \ + (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | \ + PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5)) // String Descriptor Index -enum -{ +enum { STRID_LANGID = 0, STRID_MANUFACTURER, STRID_PRODUCT, STRID_SERIAL, STRID_INTERFACE, - STRID_MAC + STRID_MAC, + STRID_COUNT }; -enum -{ +enum { ITF_NUM_CDC = 0, ITF_NUM_CDC_DATA, ITF_NUM_TOTAL }; -enum -{ +enum { #if CFG_TUD_ECM_RNDIS CONFIG_ID_RNDIS = 0, CONFIG_ID_ECM = 1, #else - CONFIG_ID_NCM = 0, + CONFIG_ID_NCM = 0, #endif CONFIG_ID_COUNT }; @@ -68,103 +68,103 @@ enum //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -static tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, +static const tusb_desc_device_t desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, #if CFG_TUD_NCM - .bcdUSB = 0x0201, + .bcdUSB = 0x0201, #else - .bcdUSB = 0x0200, + .bcdUSB = 0x0200, #endif - // Use Interface Association Descriptor (IAD) device class - .bDeviceClass = TUSB_CLASS_MISC, - .bDeviceSubClass = MISC_SUBCLASS_COMMON, - .bDeviceProtocol = MISC_PROTOCOL_IAD, + // Use Interface Association Descriptor (IAD) device class + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0101, + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0101, - .iManufacturer = STRID_MANUFACTURER, - .iProduct = STRID_PRODUCT, - .iSerialNumber = STRID_SERIAL, + .iManufacturer = STRID_MANUFACTURER, + .iProduct = STRID_PRODUCT, + .iSerialNumber = STRID_SERIAL, - .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations + .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations }; // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; +const uint8_t *tud_descriptor_device_cb(void) { + return (const uint8_t *)&desc_device; } //--------------------------------------------------------------------+ // Configuration Descriptor //--------------------------------------------------------------------+ -#define MAIN_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN) -#define ALT_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN) -#define NCM_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_NCM_DESC_LEN) +#define MAIN_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN) +#define ALT_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN) +#define NCM_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_NCM_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX - // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number - // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x82 +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x82 #elif CFG_TUSB_MCU == OPT_MCU_CXD56 - // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number - // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) - #define EPNUM_NET_NOTIF 0x83 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x81 +// CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number +// 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) +#define EPNUM_NET_NOTIF 0x83 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x81 #elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) - // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x83 +// MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h +// e.g EP1 OUT & EP1 IN cannot exist together +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x83 #else - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x82 +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x82 #endif #if CFG_TUD_ECM_RNDIS -static uint8_t const rndis_configuration[] = -{ +static uint8_t const rndis_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS+1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS + 1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_RNDIS_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), + TUD_RNDIS_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), }; -static uint8_t const ecm_configuration[] = -{ +static const uint8_t ecm_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM+1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM + 1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. - TUD_CDC_ECM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), + TUD_CDC_ECM_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, + CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), }; #else -static uint8_t const ncm_configuration[] = -{ +static uint8_t const ncm_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_NCM+1, ITF_NUM_TOTAL, 0, NCM_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_NCM + 1, ITF_NUM_TOTAL, 0, NCM_CONFIG_TOTAL_LEN, 0, 100), // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. - TUD_CDC_NCM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), + TUD_CDC_NCM_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, + CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), }; #endif @@ -173,21 +173,19 @@ static uint8_t const ncm_configuration[] = // - Windows only works with RNDIS // - MacOS only works with CDC-ECM // - Linux will work on both -static uint8_t const * const configuration_arr[2] = -{ +static const uint8_t *const configuration_arr[CONFIG_ID_COUNT] = { #if CFG_TUD_ECM_RNDIS [CONFIG_ID_RNDIS] = rndis_configuration, - [CONFIG_ID_ECM ] = ecm_configuration + [CONFIG_ID_ECM] = ecm_configuration #else - [CONFIG_ID_NCM ] = ncm_configuration + [CONFIG_ID_NCM] = ncm_configuration #endif }; // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +const uint8_t *tud_descriptor_configuration_cb(uint8_t index) { return (index < CONFIG_ID_COUNT) ? configuration_arr[index] : NULL; } @@ -213,61 +211,62 @@ https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/ (Section Microsoft OS compatibility descriptors) */ -#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) +#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) -#define MS_OS_20_DESC_LEN 0xB2 +#define MS_OS_20_DESC_LEN 0xB2 // BOS Descriptor is required for webUSB -uint8_t const desc_bos[] = -{ +const uint8_t desc_bos[] = { // total length, number of device caps TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 1), // Microsoft OS 2.0 descriptor - TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1) -}; + TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1)}; -uint8_t const * tud_descriptor_bos_cb(void) -{ +const uint8_t *tud_descriptor_bos_cb(void) { return desc_bos; } -uint8_t const desc_ms_os_20[] = -{ +const uint8_t desc_ms_os_20[] = { // Set header: length, type, windows version, total length - U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), U16_TO_U8S_LE(MS_OS_20_DESC_LEN), + U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), + U16_TO_U8S_LE(MS_OS_20_DESC_LEN), // Configuration subset header: length, type, configuration index, reserved, configuration total length - U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A), + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A), // Function Subset header: length, type, first interface, reserved, subset length - U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_CDC, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08), + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_CDC, 0, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A - 0x08), // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID - U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'N', 'C', 'M', 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible + U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'N', 'C', 'M', 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible // MS OS 2.0 Registry property descriptor: length, type - U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08-0x08-0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), - U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 - 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, - 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A - 0x08 - 0x08 - 0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), + U16_TO_U8S_LE(0x0007), + U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 + 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, 'r', + 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, U16_TO_U8S_LE(0x0050), // wPropertyDataLength - //bPropertyData: {12345678-0D08-43FD-8B3E-127CA8AFFF9D} - '{', 0x00, '1', 0x00, '2', 0x00, '3', 0x00, '4', 0x00, '5', 0x00, '6', 0x00, '7', 0x00, '8', 0x00, '-', 0x00, - '0', 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, - '8', 0x00, 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, - '8', 0x00, 'A', 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00 -}; + //bPropertyData: {12345678-0D08-43FD-8B3E-127CA8AFFF9D} + '{', 0x00, '1', 0x00, '2', 0x00, '3', 0x00, '4', 0x00, '5', 0x00, '6', 0x00, '7', 0x00, '8', 0x00, '-', 0x00, '0', + 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, '8', 0x00, + 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, '8', 0x00, 'A', + 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00}; TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size"); // Invoked when a control transfer occurred on an interface of this class // Driver response accordingly to the request and the transfer stage (setup/data/ack) // return false to stall control endpoint (e.g unsupported request) -bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const* request) { +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_request_t *request) { // nothing to with DATA & ACK stage - if (stage != CONTROL_STAGE_SETUP) return true; + if (stage != CONTROL_STAGE_SETUP) { + return true; + } switch (request->bmRequestType_bit.type) { case TUSB_REQ_TYPE_VENDOR: @@ -278,16 +277,18 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ uint16_t total_len; memcpy(&total_len, desc_ms_os_20 + 8, 2); - return tud_control_xfer(rhport, request, (void*)(uintptr_t)desc_ms_os_20, total_len); + return tud_control_xfer(rhport, request, (void *)(uintptr_t)desc_ms_os_20, total_len); } else { return false; } - default: break; + default: + break; // nothing to do } break; - default: break; + default: + break; // nothing to do } // stall unknown request @@ -300,26 +301,24 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ //--------------------------------------------------------------------+ // array of pointer to string descriptors -static char const* string_desc_arr [] = -{ - [STRID_LANGID] = (const char[]) { 0x09, 0x04 }, // supported language is English (0x0409) - [STRID_MANUFACTURER] = "TinyUSB", // Manufacturer - [STRID_PRODUCT] = "TinyUSB Device", // Product - [STRID_SERIAL] = NULL, // Serials will use unique ID if possible - [STRID_INTERFACE] = "TinyUSB Network Interface" // Interface Description - - // STRID_MAC index is handled separately +static const char *string_desc_arr[STRID_COUNT] = { + [STRID_LANGID] = (const char[]){0x09, 0x04}, // supported language is English (0x0409) + [STRID_MANUFACTURER] = "TinyUSB", // Manufacturer + [STRID_PRODUCT] = "TinyUSB Device", // Product + [STRID_SERIAL] = NULL, // Serials will use unique ID if possible + [STRID_INTERFACE] = "TinyUSB Network Interface", // Interface Description + [STRID_MAC] = NULL // STRID_MAC index is handled separately }; static uint16_t _desc_str[32 + 1]; // Invoked when received GET STRING DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete -uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { - (void) langid; +const uint16_t *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + (void)langid; unsigned int chr_count = 0; - switch ( index ) { + switch (index) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); chr_count = 1; @@ -331,34 +330,40 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { case STRID_MAC: // Convert MAC address into UTF-16 - for (unsigned i=0; i> 4) & 0xf]; - _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf]; + for (unsigned i = 0; i < sizeof(tud_network_mac_address); i++) { + _desc_str[1 + chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 4) & 0xf]; + _desc_str[1 + chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf]; } break; - default: + default: { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (index >= sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); - size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + + const size_t max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 - for ( size_t i = 0; i < chr_count; i++ ) { + for (size_t i = 0; i < chr_count; i++) { _desc_str[1 + i] = str[i]; } break; + } } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); + _desc_str[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); return _desc_str; } diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 100deba1f..11cc00983 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -56,10 +56,9 @@ function(family_add_board BOARD_TARGET) endif() endforeach() - target_compile_definitions(${BOARD_TARGET} PUBLIC __STARTUP_CLEAR_BSS - CFG_TUSB_MEM_SECTION=__attribute__\(\(section\(\"NonCacheable\"\)\)\) + [=[CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable")))]=] ) if (NOT M4 STREQUAL "1") diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 35e5fc923..a51b3f758 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -105,7 +105,9 @@ static bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); // Note we can't call into any sleep functions in flash right now - for (volatile int i = 0; i < 1000; ++i) {} + for (volatile int i = 0; i < 1000; ++i) { + __nop(); + } // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. // Note the button pulls the pin *low* when pressed. diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 577a92a52..e821fffda 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -270,7 +270,7 @@ uint32_t tud_cdc_n_write_flush(uint8_t itf) { TU_VERIFY(tud_ready(), 0); // Skip if usb is not ready yet // No data to send - if (!tu_fifo_count(&p_cdc->tx_ff)) { + if (0 == tu_fifo_count(&p_cdc->tx_ff)) { return 0; } @@ -279,7 +279,7 @@ uint32_t tud_cdc_n_write_flush(uint8_t itf) { // Pull data from FIFO const uint16_t count = tu_fifo_read_n(&p_cdc->tx_ff, p_epbuf->epin, CFG_TUD_CDC_EP_BUFSIZE); - if (count) { + if (count > 0) { TU_ASSERT(usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_in, p_epbuf->epin, count), 0); return count; } else { @@ -337,15 +337,15 @@ bool cdcd_deinit(void) { #if OSAL_MUTEX_REQUIRED for(uint8_t i=0; irx_ff.mutex_rd; - osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; + const osal_mutex_t mutex_rd = p_cdc->rx_ff.mutex_rd; + const osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; - if (mutex_rd) { + if (mutex_rd != NULL) { osal_mutex_delete(mutex_rd); tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, NULL); } - if (mutex_wr) { + if (mutex_wr != NULL) { osal_mutex_delete(mutex_wr); tu_fifo_config_mutex(&p_cdc->tx_ff, NULL, NULL); } @@ -456,6 +456,8 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); } else if (stage == CONTROL_STAGE_ACK) { tud_cdc_line_coding_cb(itf, &p_cdc->line_coding); + } else { + // nothing to do } break; @@ -491,6 +493,8 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ // Invoke callback tud_cdc_line_state_cb(itf, dtr, rts); + } else { + // nothing to do } break; @@ -500,7 +504,10 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } else if (stage == CONTROL_STAGE_ACK) { TU_LOG_DRV(" Send Break\r\n"); tud_cdc_send_break_cb(itf, request->wValue); + } else { + // nothing to do } + break; default: @@ -558,7 +565,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ if (0 == tud_cdc_n_write_flush(itf)) { // If there is no data left, a ZLP should be sent if // xferred_bytes is multiple of EP Packet size and not zero - if (!tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { + if (0 == tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes > 0 && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { if (usbd_edpt_claim(rhport, p_cdc->ep_in)) { TU_ASSERT(usbd_edpt_xfer(rhport, p_cdc->ep_in, NULL, 0)); } diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index c321f3d16..f30f93bc6 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -53,15 +53,16 @@ // Driver Configuration //--------------------------------------------------------------------+ typedef struct TU_ATTR_PACKED { - uint8_t rx_persistent : 1; // keep rx fifo data even with bus reset or disconnect - uint8_t tx_persistent : 1; // keep tx fifo data even with reset or disconnect - uint8_t tx_overwritabe_if_not_connected : 1; // if not connected, tx fifo can be overwritten + bool rx_persistent : 1; // keep rx fifo data even with bus reset or disconnect + bool tx_persistent : 1; // keep tx fifo data even with reset or disconnect + bool tx_overwritabe_if_not_connected : 1; // if not connected, tx fifo can be overwritten } tud_cdc_configure_t; +TU_VERIFY_STATIC(sizeof(tud_cdc_configure_t) == 1, "size is not correct"); #define TUD_CDC_CONFIGURE_DEFAULT() { \ - .rx_persistent = 0, \ - .tx_persistent = 0, \ - .tx_overwritabe_if_not_connected = 1, \ + .rx_persistent = false, \ + .tx_persistent = false, \ + .tx_overwritabe_if_not_connected = false, \ } // Configure CDC driver behavior diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index b0eafd5da..7e0202ddd 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -83,7 +83,7 @@ typedef struct { uint8_t add_sense_code; uint8_t add_sense_qualifier; - uint8_t pending_io; // pending async IO + bool pending_io; // pending async IO }mscd_interface_t; static mscd_interface_t _mscd_itf; @@ -92,6 +92,8 @@ CFG_TUD_MEM_SECTION static struct { TUD_EPBUF_DEF(buf, CFG_TUD_MSC_EP_BUFSIZE); } _mscd_epbuf; +TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE >= 64, "CFG_TUD_MSC_EP_BUFSIZE must be at least 64"); + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ @@ -107,16 +109,16 @@ TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) { return tu_bit_test(dir, 7); } -static inline bool send_csw(mscd_interface_t* p_msc) { +TU_ATTR_ALWAYS_INLINE static inline bool send_csw(mscd_interface_t* p_msc) { // Data residue is always = host expect - actual transferred uint8_t rhport = p_msc->rhport; p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; p_msc->stage = MSC_STAGE_STATUS_SENT; - memcpy(_mscd_epbuf.buf, &p_msc->csw, sizeof(msc_csw_t)); + memcpy(_mscd_epbuf.buf, (uint8_t*) &p_msc->csw, sizeof(msc_csw_t)); //-V1086 return usbd_edpt_xfer(rhport, p_msc->ep_in , _mscd_epbuf.buf, sizeof(msc_csw_t)); } -static inline bool prepare_cbw(mscd_interface_t* p_msc) { +TU_ATTR_ALWAYS_INLINE static inline bool prepare_cbw(mscd_interface_t* p_msc) { uint8_t rhport = p_msc->rhport; p_msc->stage = MSC_STAGE_CMD; return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t)); @@ -133,7 +135,7 @@ static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { // failed but sense key is not set: default to Illegal Request if (p_msc->sense_key == 0) { - tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + (void) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); } // If there is data stage and not yet complete, stall it @@ -146,18 +148,18 @@ static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { } } -static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { +TU_ATTR_ALWAYS_INLINE static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { // use offsetof to avoid pointer to the odd/unaligned address const uint32_t lba = tu_unaligned_read32(command + offsetof(scsi_write10_t, lba)); return tu_ntohl(lba); // lba is in Big Endian } -static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { uint16_t const block_count = tu_unaligned_read16(cbw->command + offsetof(scsi_write10_t, block_count)); return tu_ntohs(block_count); } -static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { // first extract block count in the command uint16_t const block_count = rdwr10_get_blockcount(cbw); if (block_count == 0) { @@ -171,7 +173,7 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { uint16_t const block_count = rdwr10_get_blockcount(cbw); if (cbw->total_bytes == 0) { - if (block_count) { + if (block_count > 0) { TU_LOG_DRV(" SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } else { @@ -190,6 +192,8 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { } else if (cbw->total_bytes / block_count == 0) { TU_LOG_DRV(" Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; + } else { + // nothing to do } } @@ -309,7 +313,7 @@ bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, u TU_ATTR_ALWAYS_INLINE static inline void set_sense_medium_not_present(uint8_t lun) { // default sense is NOT READY, MEDIUM NOT PRESENT - tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); + (void) tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); } static void proc_async_io_done(void *bytes_io) { @@ -318,7 +322,7 @@ static void proc_async_io_done(void *bytes_io) { const int32_t nbytes = (int32_t) (intptr_t) bytes_io; const uint8_t cmd = p_msc->cbw.command[0]; - p_msc->pending_io = 0; + p_msc->pending_io = false; switch (cmd) { case SCSI_CMD_READ_10: proc_read_io_data(p_msc, nbytes); @@ -328,7 +332,7 @@ static void proc_async_io_done(void *bytes_io) { proc_write_io_data(p_msc, (uint32_t) nbytes, nbytes); break; - default: break; + default: break; // nothing to do } // send status if stage is transitioned to STATUS @@ -429,6 +433,8 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t TU_ASSERT(prepare_cbw(p_msc)); } } + } else { + // nothing to do } } @@ -438,7 +444,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t // From this point only handle class request only TU_VERIFY(request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS); - switch ( request->bRequest ) { + switch (request->bRequest) { case MSC_REQ_RESET: TU_LOG_DRV(" MSC BOT Reset\r\n"); TU_VERIFY(request->wValue == 0 && request->wLength == 0); @@ -451,7 +457,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t TU_VERIFY(request->wValue == 0 && request->wLength == 1); uint8_t maxlun = tud_msc_get_maxlun_cb(); - TU_VERIFY(maxlun); + TU_VERIFY(maxlun != 0); maxlun--; // MAX LUN is minus 1 by specs tud_control_xfer(rhport, request, &maxlun, 1); break; @@ -510,7 +516,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if (status != MSC_CSW_STATUS_PASSED) { fail_scsi_op(p_msc, status); - } else if (p_cbw->total_bytes) { + } else if (p_cbw->total_bytes > 0) { if (SCSI_CMD_READ_10 == p_cbw->command[0]) { proc_read10_cmd(p_msc); } else { @@ -547,7 +553,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t TU_LOG_DRV(" SCSI unsupported or failed command\r\n"); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else if (resplen == 0) { - if (p_cbw->total_bytes) { + if (p_cbw->total_bytes > 0) { // 6.7 The 13 Cases: case 4 (Hi > Dn) // TU_LOG_DRV(" SCSI case 4 (Hi > Dn): %lu\r\n", p_cbw->total_bytes); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); @@ -647,7 +653,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } break; - default: break; + default: break; // nothing to do } if (p_msc->stage == MSC_STAGE_STATUS) { @@ -683,9 +689,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } break; - case SCSI_CMD_START_STOP_UNIT: + case SCSI_CMD_START_STOP_UNIT: { resplen = 0; - scsi_start_stop_unit_t const* start_stop = (scsi_start_stop_unit_t const*)scsi_cmd; if (!tud_msc_start_stop_cb(lun, start_stop->power_condition, start_stop->start, start_stop->load_eject)) { // Failed status response @@ -697,10 +702,10 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } } break; + } - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: { resplen = 0; - scsi_prevent_allow_medium_removal_t const* prevent_allow = (scsi_prevent_allow_medium_removal_t const*)scsi_cmd; if (!tud_msc_prevent_allow_medium_removal_cb(lun, prevent_allow->prohibit_removal, prevent_allow->control)) { // Failed status response @@ -712,7 +717,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } } break; - + } case SCSI_CMD_READ_CAPACITY_10: { uint32_t block_count; @@ -740,8 +745,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(read_capa10); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &read_capa10, (size_t) resplen)); } + break; } - break; case SCSI_CMD_READ_FORMAT_CAPACITY: { scsi_read_format_capacity_data_t read_fmt_capa = { @@ -772,8 +777,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(read_fmt_capa); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &read_fmt_capa, (size_t) resplen)); } + break; } - break; case SCSI_CMD_INQUIRY: { scsi_inquiry_resp_t *inquiry_rsp = (scsi_inquiry_resp_t *) buffer; @@ -789,8 +794,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ tud_msc_inquiry_cb(lun, inquiry_rsp->vendor_id, inquiry_rsp->product_id, inquiry_rsp->product_rev); resplen = sizeof(scsi_inquiry_resp_t); } + break; } - break; case SCSI_CMD_MODE_SENSE_6: { scsi_mode_sense6_resp_t mode_resp = { @@ -807,8 +812,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(mode_resp); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &mode_resp, (size_t) resplen)); + break; } - break; case SCSI_CMD_REQUEST_SENSE: { scsi_sense_fixed_resp_t sense_rsp = { @@ -828,9 +833,9 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = tud_msc_request_sense_cb(lun, buffer, (uint16_t)bufsize); // Clear sense data after copy - tud_msc_set_sense(lun, 0, 0, 0); + (void) tud_msc_set_sense(lun, 0, 0, 0); + break; } - break; default: resplen = -1; break; @@ -842,6 +847,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ static void proc_read10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero + TU_VERIFY(block_sz != 0, ); // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); uint32_t const offset = p_msc->xferred_len % block_sz; @@ -849,10 +855,10 @@ static void proc_read10_cmd(mscd_interface_t* p_msc) { // remaining bytes capped at class buffer int32_t nbytes = (int32_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len); - p_msc->pending_io = 1; + p_msc->pending_io = true; nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, (uint32_t)nbytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->pending_io = 0; + p_msc->pending_io = false; proc_read_io_data(p_msc, nbytes); } } @@ -876,19 +882,19 @@ static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes) { dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false); break; - default: break; + default: break; // nothing to do } } } static void proc_write10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; - bool writable = tud_msc_is_writable_cb(p_cbw->lun); + const bool writable = tud_msc_is_writable_cb(p_cbw->lun); if (!writable) { // Not writable, complete this SCSI op with error // Sense = Write protected - tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); + (void) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); return; } @@ -903,15 +909,16 @@ static void proc_write10_cmd(mscd_interface_t* p_msc) { static void proc_write10_host_data(mscd_interface_t* p_msc, uint32_t xferred_bytes) { msc_cbw_t const* p_cbw = &p_msc->cbw; uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero + TU_VERIFY(block_sz != 0, ); // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); uint32_t const offset = p_msc->xferred_len % block_sz; - p_msc->pending_io = 1; + p_msc->pending_io = true; int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->pending_io = 0; + p_msc->pending_io = false; proc_write_io_data(p_msc, xferred_bytes, nbytes); } } @@ -927,7 +934,7 @@ static void proc_write_io_data(mscd_interface_t* p_msc, uint32_t xferred_bytes, fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); break; - default: break; + default: break; // nothing to do } } else { if ((uint32_t)nbytes < xferred_bytes) { diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index eb69ae400..ce2884f2e 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -152,7 +152,7 @@ bool tuh_msc_scsi_command(uint8_t daddr, msc_cbw_t const* cbw, void* data, p_msc->stage = MSC_STAGE_CMD; if (!usbh_edpt_xfer(daddr, p_msc->ep_out, (uint8_t*) &epbuf->cbw, sizeof(msc_cbw_t))) { - usbh_edpt_release(daddr, p_msc->ep_out); + (void) usbh_edpt_release(daddr, p_msc->ep_out); return false; } @@ -191,7 +191,7 @@ bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* respons .cmd_code = SCSI_CMD_INQUIRY, .alloc_length = sizeof(scsi_inquiry_resp_t) }; - memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); + memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } @@ -225,7 +225,7 @@ bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void* response, .cmd_code = SCSI_CMD_REQUEST_SENSE, .alloc_length = 18 }; - memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); + memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } @@ -247,7 +247,7 @@ bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void* buffer, uint32_t lba, u .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_read10, cbw.cmd_len); + memcpy(cbw.command, &cmd_read10, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, buffer, complete_cb, arg); } @@ -269,7 +269,7 @@ bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const* buffer, uint32_t .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_write10, cbw.cmd_len); + memcpy(cbw.command, &cmd_write10, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, (void*) (uintptr_t) buffer, complete_cb, arg); } @@ -338,8 +338,7 @@ bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32 TU_ASSERT(usbh_edpt_xfer(dev_addr, ep_data, p_msc->buffer, (uint16_t) cbw->total_bytes)); break; } - - TU_ATTR_FALLTHROUGH; // fallthrough to status stage + TU_ATTR_FALLTHROUGH; // fallthrough to data stage case MSC_STAGE_DATA: // Status stage @@ -350,20 +349,19 @@ bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32 case MSC_STAGE_STATUS: // SCSI op is complete p_msc->stage = MSC_STAGE_IDLE; - - if (p_msc->complete_cb) { + if (p_msc->complete_cb != NULL) { tuh_msc_complete_data_t const cb_data = { .cbw = cbw, .csw = csw, .scsi_data = p_msc->buffer, .user_arg = p_msc->complete_arg }; - p_msc->complete_cb(dev_addr, &cb_data); + (void) p_msc->complete_cb(dev_addr, &cb_data); } break; - // unknown state default: + // unknown state break; } @@ -501,7 +499,7 @@ static bool config_read_capacity_complete(uint8_t dev_addr, tuh_msc_complete_dat // Capacity response field: Block size and Last LBA are both Big-Endian scsi_read_capacity10_resp_t* resp = (scsi_read_capacity10_resp_t*) (uintptr_t) enum_buf; - p_msc->capacity[cbw->lun].block_count = tu_ntohl(resp->last_lba) + 1; + p_msc->capacity[cbw->lun].block_count = (uint32_t) (tu_ntohl(resp->last_lba) + 1u); p_msc->capacity[cbw->lun].block_size = tu_ntohl(resp->block_size); // Mark enumeration is complete diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index a7bf3e959..905dc239c 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -61,9 +61,9 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); TU_ATTR_ALWAYS_INLINE static inline void tu_print_buf(uint8_t const* buf, uint32_t bufsize) { for(uint32_t i=0; i= 2 diff --git a/src/device/usbd.c b/src/device/usbd.c index 9d0bc0f3f..cf96f050d 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -352,11 +352,13 @@ TU_ATTR_ALWAYS_INLINE static inline usbd_class_driver_t const * get_driver(uint8 if (drvid < _app_driver_count) { // Application drivers driver = &_app_driver[drvid]; - } else if (drvid < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0) { - driver = &_usbd_driver[drvid - _app_driver_count]; - } else { - // nothing to do + } else{ + drvid -= _app_driver_count; + if (drvid < BUILTIN_DRIVER_COUNT) { + driver = &_usbd_driver[drvid]; + } } + return driver; } diff --git a/src/host/hcd.h b/src/host/hcd.h index 4a17326ec..36a7f5da5 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -84,7 +84,7 @@ typedef struct { // FUNC_CALL struct { - void (*func) (void*); + void (*func) (void* param); void* param; }func_call; }; diff --git a/src/host/usbh.c b/src/host/usbh.c index 0330320f8..734024771 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -292,13 +292,17 @@ static uint8_t _app_driver_count = 0; #define TOTAL_DRIVER_COUNT (_app_driver_count + BUILTIN_DRIVER_COUNT) -static inline usbh_class_driver_t const *get_driver(uint8_t drv_id) { +// virtually joins built-in and application drivers together. +// Application is positioned first to allow overwriting built-in ones. +TU_ATTR_ALWAYS_INLINE static inline usbh_class_driver_t const *get_driver(uint8_t drv_id) { usbh_class_driver_t const *driver = NULL; - - if ( drv_id < _app_driver_count ) { + if (drv_id < _app_driver_count) { driver = &_app_driver[drv_id]; - } else if ( drv_id < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0) { - driver = &usbh_class_drivers[drv_id - _app_driver_count]; + } else { + drv_id -= _app_driver_count; + if (drv_id < BUILTIN_DRIVER_COUNT) { + driver = &usbh_class_drivers[drv_id]; + } } return driver; @@ -318,7 +322,7 @@ TU_ATTR_ALWAYS_INLINE static inline usbh_device_t* get_device(uint8_t dev_addr) } TU_ATTR_ALWAYS_INLINE static inline bool is_hub_addr(uint8_t daddr) { - return (CFG_TUH_HUB > 0) && (daddr > CFG_TUH_DEVICE_MAX); + return (CFG_TUH_HUB > 0) && (daddr > CFG_TUH_DEVICE_MAX); //-V560 } TU_ATTR_ALWAYS_INLINE static inline bool queue_event(hcd_event_t const * event, bool in_isr) { @@ -372,7 +376,8 @@ bool tuh_connected(uint8_t daddr) { return _usbh_data.enumerating_daddr == 0; } else { const usbh_device_t* dev = get_device(daddr); - return dev && dev->connected; + TU_VERIFY(dev != NULL); + return dev->connected; } } @@ -439,8 +444,8 @@ bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void *cfg_param) { static void clear_device(usbh_device_t* dev) { tu_memclr(dev, sizeof(usbh_device_t)); - memset(dev->itf2drv, TUSB_INDEX_INVALID_8, sizeof(dev->itf2drv)); // invalid mapping - memset(dev->ep2drv , TUSB_INDEX_INVALID_8, sizeof(dev->ep2drv )); // invalid mapping + (void) memset(dev->itf2drv, TUSB_INDEX_INVALID_8, sizeof(dev->itf2drv)); // invalid mapping + (void) memset(dev->ep2drv , TUSB_INDEX_INVALID_8, sizeof(dev->ep2drv )); // invalid mapping } bool tuh_inited(void) { @@ -510,7 +515,7 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // Class drivers for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { usbh_class_driver_t const* driver = get_driver(drv_id); - if (driver) { + if (driver != NULL) { TU_LOG_USBH("%s init\r\n", driver->name); driver->init(); } @@ -657,7 +662,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // with enabled driver e.g HID endpoint #if CFG_TUH_API_EDPT_XFER tuh_xfer_cb_t const complete_cb = dev->ep_callback[epnum][ep_dir].complete_cb; - if ( complete_cb ) { + if (complete_cb != NULL) { // re-construct xfer info tuh_xfer_t xfer = { .daddr = event.dev_addr, @@ -675,7 +680,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { { uint8_t drv_id = dev->ep2drv[epnum][ep_dir]; usbh_class_driver_t const* driver = get_driver(drv_id); - if (driver) { + if (driver != NULL) { TU_LOG_USBH(" %s xfer callback\r\n", driver->name); driver->xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); @@ -690,10 +695,13 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { } case USBH_EVENT_FUNC_CALL: - if (event.func_call.func) event.func_call.func(event.func_call.param); + if (event.func_call.func != NULL) { + event.func_call.func(event.func_call.param); + } break; default: + // unknown event break; } @@ -743,7 +751,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { tu_str_std_request[xfer->setup->bRequest] : "Class Request"); TU_LOG_BUF_USBH(xfer->setup, 8); - if (xfer->complete_cb) { + if (xfer->complete_cb != NULL) { TU_ASSERT(usbh_setup_send(daddr, (uint8_t const *) &_usbh_epbuf.request)); }else { // blocking if complete callback is not provided @@ -795,7 +803,7 @@ static void _control_xfer_complete(uint8_t daddr, xfer_result_t result) { _control_set_xfer_stage(CONTROL_STAGE_IDLE); - if (xfer_temp.complete_cb) { + if (xfer_temp.complete_cb != NULL) { xfer_temp.complete_cb(&xfer_temp); } } @@ -834,7 +842,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t case XFER_RESULT_SUCCESS: switch(ctrl_info->stage) { case CONTROL_STAGE_SETUP: - if (request->wLength) { + if (request->wLength > 0) { // DATA stage: initial data toggle is always 1 _control_set_xfer_stage(CONTROL_STAGE_DATA); const uint8_t ep_data = tu_edpt_addr(0, request->bmRequestType_bit.direction); @@ -844,7 +852,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t TU_ATTR_FALLTHROUGH; case CONTROL_STAGE_DATA: { - if (request->wLength) { + if (request->wLength > 0) { TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, daddr); TU_LOG_MEM_USBH(ctrl_info->buffer, xferred_bytes, 2); } @@ -1084,7 +1092,7 @@ bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { bool tuh_bus_info_get(uint8_t daddr, tuh_bus_info_t* bus_info) { usbh_device_t const* dev = get_device(daddr); - if (dev) { + if (dev != NULL) { *bus_info = dev->bus_info; } else { *bus_info = _usbh_data.dev0_bus; @@ -1109,7 +1117,9 @@ TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) } break; - default: break; + default: + // nothing to do + break; } queue_event(event, in_isr); @@ -1423,16 +1433,13 @@ static bool enum_new_device(hcd_event_t* event) { // wait until device connection is stable TODO non blocking tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS); - // clear roothub debouncing delay - if (dev0_bus->hub_addr == 0) { - _usbh_data.attach_debouncing_bm &= (uint8_t) ~TU_BIT(dev0_bus->rhport); - } - if (dev0_bus->hub_addr == 0) { // connected directly to roothub // USB bus not active and frame number is not available yet. // need to depend on tusb_time_millis_api() TODO non blocking + _usbh_data.attach_debouncing_bm &= (uint8_t) ~TU_BIT(dev0_bus->rhport); // clear roothub debouncing delay + if (!hcd_port_connect_status(dev0_bus->rhport)) { TU_LOG_USBH("Device unplugged while debouncing\r\n"); enum_full_complete(); @@ -1503,7 +1510,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { usbh_device_t* dev = get_device(daddr); tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; if (daddr > 0) { - TU_ASSERT(dev,); + TU_ASSERT(dev != NULL,); } uint16_t langid = 0x0409; // default is English @@ -1619,17 +1626,18 @@ static void process_enumeration(tuh_xfer_t* xfer) { case ENUM_GET_STRING_LANGUAGE_ID_LEN: { // save the received device descriptor tusb_desc_device_t const *desc_device = (tusb_desc_device_t const *) _usbh_epbuf.ctrl; - dev->bcdUSB = desc_device->bcdUSB; - dev->bDeviceClass = desc_device->bDeviceClass; - dev->bDeviceSubClass = desc_device->bDeviceSubClass; - dev->bDeviceProtocol = desc_device->bDeviceProtocol; - dev->bMaxPacketSize0 = desc_device->bMaxPacketSize0; - dev->idVendor = desc_device->idVendor; - dev->idProduct = desc_device->idProduct; - dev->bcdDevice = desc_device->bcdDevice; - dev->iManufacturer = desc_device->iManufacturer; - dev->iProduct = desc_device->iProduct; - dev->iSerialNumber = desc_device->iSerialNumber; + + dev->bcdUSB = desc_device->bcdUSB; + dev->bDeviceClass = desc_device->bDeviceClass; + dev->bDeviceSubClass = desc_device->bDeviceSubClass; + dev->bDeviceProtocol = desc_device->bDeviceProtocol; + dev->bMaxPacketSize0 = desc_device->bMaxPacketSize0; + dev->idVendor = desc_device->idVendor; + dev->idProduct = desc_device->idProduct; + dev->bcdDevice = desc_device->bcdDevice; + dev->iManufacturer = desc_device->iManufacturer; + dev->iProduct = desc_device->iProduct; + dev->iSerialNumber = desc_device->iSerialNumber; dev->bNumConfigurations = desc_device->bNumConfigurations; tuh_enum_descriptor_device_cb(daddr, desc_device); // callback @@ -1654,9 +1662,8 @@ static void process_enumeration(tuh_xfer_t* xfer) { tuh_descriptor_get_string(daddr, dev->iManufacturer, langid, _usbh_epbuf.ctrl, 2, process_enumeration, ENUM_GET_STRING_MANUFACTURER); break; - }else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; } case ENUM_GET_STRING_MANUFACTURER: { @@ -1666,22 +1673,21 @@ static void process_enumeration(tuh_xfer_t* xfer) { tuh_descriptor_get_string(daddr, dev->iManufacturer, langid, _usbh_epbuf.ctrl, str_len, process_enumeration, ENUM_GET_STRING_PRODUCT_LEN); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; } - case ENUM_GET_STRING_PRODUCT_LEN: + case ENUM_GET_STRING_PRODUCT_LEN: { if (dev->iProduct != 0) { if (state == ENUM_GET_STRING_PRODUCT_LEN) { langid = tu_le16toh(xfer->setup->wIndex); // get langid from previous setup packet if not fall through } - tuh_descriptor_get_string(daddr, dev->iProduct, langid, _usbh_epbuf.ctrl, 2, - process_enumeration, ENUM_GET_STRING_PRODUCT); + tuh_descriptor_get_string( + daddr, dev->iProduct, langid, _usbh_epbuf.ctrl, 2, process_enumeration, ENUM_GET_STRING_PRODUCT); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; + } case ENUM_GET_STRING_PRODUCT: { if (dev->iProduct != 0) { @@ -1690,22 +1696,21 @@ static void process_enumeration(tuh_xfer_t* xfer) { tuh_descriptor_get_string(daddr, dev->iProduct, langid, _usbh_epbuf.ctrl, str_len, process_enumeration, ENUM_GET_STRING_SERIAL_LEN); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; } - case ENUM_GET_STRING_SERIAL_LEN: + case ENUM_GET_STRING_SERIAL_LEN: { if (dev->iSerialNumber != 0) { if (state == ENUM_GET_STRING_SERIAL_LEN) { langid = tu_le16toh(xfer->setup->wIndex); // get langid from previous setup packet if not fall through } - tuh_descriptor_get_string(daddr, dev->iSerialNumber, langid, _usbh_epbuf.ctrl, 2, - process_enumeration, ENUM_GET_STRING_SERIAL); + tuh_descriptor_get_string( + daddr, dev->iSerialNumber, langid, _usbh_epbuf.ctrl, 2, process_enumeration, ENUM_GET_STRING_SERIAL); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; + } case ENUM_GET_STRING_SERIAL: { if (dev->iSerialNumber != 0) { @@ -1714,9 +1719,8 @@ static void process_enumeration(tuh_xfer_t* xfer) { tuh_descriptor_get_string(daddr, dev->iSerialNumber, langid, _usbh_epbuf.ctrl, str_len, process_enumeration, ENUM_GET_9BYTE_CONFIG_DESC); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; } case ENUM_GET_9BYTE_CONFIG_DESC: { diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index ace5907d7..f5385071a 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -81,8 +81,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { (void) in_isr; - sem_release(sem_hdl); - return true; + return sem_release(sem_hdl); } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { @@ -139,7 +138,7 @@ typedef osal_queue_def_t* osal_queue_t; TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { critical_section_init(&qdef->critsec); - tu_fifo_clear(&qdef->ff); + (void) tu_fifo_clear(&qdef->ff); return (osal_queue_t) qdef; } -- cgit v1.3.1 From dc196b2b95f0ab3573cb10543e32a08810cefe3f Mon Sep 17 00:00:00 2001 From: Lwazi Dube Date: Fri, 7 Nov 2025 16:38:11 -0500 Subject: Prevent tu_edpt_number() from returning an invalid endpoint number --- src/common/tusb_types.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index a3a660d3b..73c816e3e 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -103,6 +103,7 @@ typedef enum { TUSB_DIR_OUT = 0, TUSB_DIR_IN = 1, + TUSB_EPNUM_MASK = 0x0F, TUSB_DIR_IN_MASK = 0x80 } tusb_dir_t; @@ -544,7 +545,7 @@ TU_ATTR_ALWAYS_INLINE static inline tusb_dir_t tu_edpt_dir(uint8_t addr) { // Get Endpoint number from address TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_number(uint8_t addr) { - return (uint8_t) (addr & (~TUSB_DIR_IN_MASK)); + return (uint8_t) (addr & TUSB_EPNUM_MASK); } TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_addr(uint8_t num, uint8_t dir) { -- cgit v1.3.1 From 7f173ab5ed6a80a5fd6780779fe63fb97d2be0e9 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 8 Nov 2025 15:54:02 +0700 Subject: fix more alerts --- .PVS-Studio/.pvsconfig | 1 + .clang-format | 1 + .github/workflows/static_analysis.yml | 3 +- examples/device/cdc_uac2/src/cdc_app.c | 2 +- examples/device/net_lwip_webserver/src/arch/cc.h | 6 +- examples/host/cdc_msc_hid/src/cdc_app.c | 2 +- src/class/audio/audio_device.c | 35 +- src/class/cdc/cdc_host.c | 81 +++-- src/class/msc/msc_host.c | 5 +- src/common/tusb_debug.h | 16 +- src/common/tusb_fifo.c | 414 ++++++++++------------- src/common/tusb_fifo.h | 25 +- src/common/tusb_private.h | 21 +- src/tusb.c | 38 ++- 14 files changed, 314 insertions(+), 336 deletions(-) diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index d8654b077..c9e60c996 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -10,6 +10,7 @@ //-V::2520 [MISRA-C-16.3] Every switch-clause should be terminated by an unconditional 'break' statement //-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. //-V:memmove:2547 [MISRA-C-17.7] The return value of non-void function 'memmove' should be used. +//-V:printf:2547 [MISRA-C-17.7] //-V::2584::{gintsts} dwc2 //-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. //+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES diff --git a/.clang-format b/.clang-format index c7d769172..907dd7cdd 100644 --- a/.clang-format +++ b/.clang-format @@ -87,5 +87,6 @@ SpacesInAngles: false SpacesInConditionalStatement: false SpacesInCStyleCastParentheses: false SpacesInParentheses: false +SortIncludes: false TabWidth: 2 ... diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 227f5e103..a89cdc279 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -118,13 +118,14 @@ jobs: sudo apt update sudo apt install pvs-studio pvs-studio-analyzer credentials ${{ secrets.PVS_STUDIO_CREDENTIALS }} + pvs-studio-analyzer --version - name: Analyze run: | mkdir -p build cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_BUILD_TYPE=MinSizeRel cmake --build build - pvs-studio-analyzer analyze -R .PVS-Studio/.pvsconfig -f build/compile_commands.json --exclude-path hw/mcu/ --exclude-path lib/ -j + pvs-studio-analyzer analyze -f build/compile_commands.json -R .PVS-Studio/.pvsconfig -j4 --security-related-issues --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser -e lib/ -e hw/mcu/ -e */iar/cxarm/ -e pico-sdk/ plog-converter -t sarif -o pvs-studio-${{ matrix.board }}.sarif PVS-Studio.log - name: Upload SARIF diff --git a/examples/device/cdc_uac2/src/cdc_app.c b/examples/device/cdc_uac2/src/cdc_app.c index e3ad8a9ac..6d18a0e69 100644 --- a/examples/device/cdc_uac2/src/cdc_app.c +++ b/examples/device/cdc_uac2/src/cdc_app.c @@ -48,7 +48,7 @@ void tud_cdc_rx_cb(uint8_t itf) { // connected() check for DTR bit // Most but not all terminal client set this when making connection if (tud_cdc_connected()) { - if (tud_cdc_available()) { + if (tud_cdc_available() > 0) { count = tud_cdc_n_read(itf, buf, sizeof(buf)); (void) count; diff --git a/examples/device/net_lwip_webserver/src/arch/cc.h b/examples/device/net_lwip_webserver/src/arch/cc.h index 9f30b91cb..c3fc12dda 100644 --- a/examples/device/net_lwip_webserver/src/arch/cc.h +++ b/examples/device/net_lwip_webserver/src/arch/cc.h @@ -29,8 +29,8 @@ * Author: Adam Dunkels * */ -#ifndef __CC_H__ -#define __CC_H__ +#ifndef CC_H__ +#define CC_H__ //#include "cpu.h" @@ -72,4 +72,4 @@ typedef int sys_prot_t; #define LWIP_PLATFORM_ASSERT(x) do { if(!(x)) while(1); } while(0) -#endif /* __CC_H__ */ +#endif /* CC_H__ */ diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index d3daedffc..4c2c5e807 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -51,7 +51,7 @@ void cdc_app_task(void) { for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) { if (tuh_cdc_mounted(idx)) { // console --> cdc interfaces - if (count) { + if (count > 0) { tuh_cdc_write(idx, buf, count); tuh_cdc_write_flush(idx); } diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index d47d87a69..f074b7d02 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -503,7 +503,7 @@ static bool audiod_rx_xfer_isr(uint8_t rhport, audiod_function_t* audio, uint16_ #if USE_LINEAR_BUFFER_RX // Data currently is in linear buffer, copy into EP OUT FIFO - TU_VERIFY(tu_fifo_write_n(&audio->ep_out_ff, audio->lin_buf_out, n_bytes_received)); + TU_VERIFY(0 < tu_fifo_write_n(&audio->ep_out_ff, audio->lin_buf_out, n_bytes_received)); // Schedule for next receive TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz), false); @@ -672,8 +672,12 @@ uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) { // The size of isochronous packets created by the device must be within the limits specified in FMT-2.0 section 2.3.1.1. // This means that the deviation of actual packet size from nominal size must not exceed +/- one audio slot // (audio slot = channel count samples). - if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; - if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; + if (feedback > audio->feedback.max_value) { + feedback = audio->feedback.max_value; + } + if (feedback < audio->feedback.min_value) { + feedback = audio->feedback.min_value; + } tud_audio_n_fb_set(func_id, feedback); @@ -714,7 +718,6 @@ void audiod_init(void) { // Initialize IN EP FIFO if required #if CFG_TUD_AUDIO_ENABLE_EP_IN - switch (i) { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 case 0: @@ -883,9 +886,11 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint || tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { break; } else if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass == AUDIO_SUBCLASS_STREAMING) { - if (_audiod_fct[i].p_desc_as == 0) { + if (_audiod_fct[i].p_desc_as == NULL) { _audiod_fct[i].p_desc_as = p_desc; } + } else { + // nothing to do } total_len += p_desc[0]; p_desc = tu_desc_next(p_desc); @@ -957,19 +962,19 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint } #if CFG_TUD_AUDIO_ENABLE_EP_IN - if (ep_in) { + if (ep_in != 0) { usbd_edpt_iso_alloc(rhport, ep_in, ep_in_size); } #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT - if (ep_out) { + if (ep_out != 0) { usbd_edpt_iso_alloc(rhport, ep_out, ep_out_size); } #endif #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - if (ep_fb) { + if (ep_fb != 0) { usbd_edpt_iso_alloc(rhport, ep_fb, 4); } #endif @@ -998,6 +1003,8 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint if (tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) { _audiod_fct[i].bclock_id_tx = p_desc[8]; } + } else { + // nothing to do } p_desc = tu_desc_next(p_desc); } @@ -1458,6 +1465,8 @@ bool audiod_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_ return audiod_control_request(rhport, request); } else if (stage == CONTROL_STAGE_DATA) { return audiod_control_complete(rhport, request); + } else { + // nothing to do } return true; @@ -1633,8 +1642,12 @@ static void audiod_fb_fifo_count_update(audiod_function_t *audio, uint16_t lvl_n feedback = audio->feedback.compute.fifo_count.nom_value - (ff_lvl - ff_thr) * rate[1]; } - if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; - if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; + if (feedback > audio->feedback.max_value) { + feedback = audio->feedback.max_value; + } + if (feedback < audio->feedback.min_value) { + feedback = audio->feedback.min_value; + } audio->feedback.value = feedback; } @@ -1754,7 +1767,7 @@ static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t * static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id) { uint8_t i; for (i = 0; i < CFG_TUD_AUDIO; i++) { - if (_audiod_fct[i].p_desc) { + if (_audiod_fct[i].p_desc != NULL) { // Get pointer at beginning and end uint8_t const *p_desc = _audiod_fct[i].p_desc; uint8_t const *p_desc_end = _audiod_fct[i].p_desc + _audiod_fct[i].desc_length; diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 3fc6a9adf..7fdf0a7b9 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -602,7 +602,7 @@ bool tuh_cdc_set_line_coding(uint8_t idx, cdc_line_coding_t const *line_coding, p_cdc->requested_line.coding = *line_coding; p_cdc->user_complete_cb = complete_cb; - if (driver->set_line_coding) { + if (driver->set_line_coding != NULL) { // driver support set_line_coding request TU_VERIFY(driver->set_line_coding(p_cdc, complete_cb ? cdch_internal_control_complete : NULL, user_data)); @@ -611,7 +611,7 @@ bool tuh_cdc_set_line_coding(uint8_t idx, cdc_line_coding_t const *line_coding, } } else { // driver does not support set_line_coding and need 2 stage to set baudrate and data format separately - if (complete_cb) { + if (complete_cb != NULL) { // non-blocking TU_VERIFY(driver->set_baudrate(p_cdc, cdch_set_line_coding_stage1_baudrate_complete, user_data)); } else { @@ -619,7 +619,7 @@ bool tuh_cdc_set_line_coding(uint8_t idx, cdc_line_coding_t const *line_coding, xfer_result_t result = XFER_RESULT_INVALID; TU_VERIFY(driver->set_baudrate(p_cdc, NULL, (uintptr_t) &result)); - if (user_data) { + if (user_data != 0) { *((xfer_result_t *) user_data) = result; } TU_VERIFY(result == XFER_RESULT_SUCCESS); @@ -627,7 +627,7 @@ bool tuh_cdc_set_line_coding(uint8_t idx, cdc_line_coding_t const *line_coding, result = XFER_RESULT_INVALID; TU_VERIFY(driver->set_data_format(p_cdc, NULL, (uintptr_t) &result)); - if (user_data) { + if (user_data != 0) { *((xfer_result_t *) user_data) = result; } TU_VERIFY(result == XFER_RESULT_SUCCESS); @@ -777,6 +777,8 @@ bool cdch_open(uint8_t rhport, uint8_t daddr, tusb_desc_interface_t const *itf_d } } } + } else { + // not supported class } return false; @@ -894,7 +896,7 @@ static void cdch_internal_control_complete(tuh_xfer_t *xfer) { // Invoke application callback xfer->complete_cb = p_cdc->user_complete_cb; - if (xfer->complete_cb) { + if (xfer->complete_cb != NULL) { xfer->complete_cb(xfer); } } @@ -910,7 +912,7 @@ static void cdch_set_line_coding_stage1_baudrate_complete(tuh_xfer_t *xfer) { TU_ASSERT(driver->set_data_format(p_cdc, cdch_set_line_coding_stage2_data_format_complete, xfer->user_data),); } else { xfer->complete_cb = p_cdc->user_complete_cb; - if (xfer->complete_cb) { + if (xfer->complete_cb != NULL) { xfer->complete_cb(xfer); } } @@ -926,7 +928,7 @@ static void cdch_set_line_coding_stage2_data_format_complete(tuh_xfer_t *xfer) { } xfer->complete_cb = p_cdc->user_complete_cb; - if (xfer->complete_cb) { + if (xfer->complete_cb != NULL) { xfer->complete_cb(xfer); } } @@ -950,12 +952,12 @@ static void acm_internal_control_complete(cdch_interface_t *p_cdc, tuh_xfer_t *x break; default: - break; + break; // unknown request } } static bool acm_set_control_line_state(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { - TU_VERIFY(p_cdc->acm.capability.support_line_request); + TU_VERIFY(p_cdc->acm.capability.support_line_request != 0); const tusb_control_request_t request = { .bmRequestType_bit = { @@ -982,7 +984,7 @@ static bool acm_set_control_line_state(cdch_interface_t *p_cdc, tuh_xfer_cb_t co } static bool acm_set_line_coding(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { - TU_VERIFY(p_cdc->acm.capability.support_line_request); + TU_VERIFY(p_cdc->acm.capability.support_line_request != 0); TU_VERIFY((p_cdc->requested_line.coding.data_bits >= 5 && p_cdc->requested_line.coding.data_bits <= 8) || p_cdc->requested_line.coding.data_bits == 16); @@ -1167,10 +1169,10 @@ static bool ftdi_set_data_format(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete static bool ftdi_set_baudrate(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { uint32_t index_value = ftdi_get_divisor(p_cdc); - TU_VERIFY(index_value); + TU_VERIFY(index_value != 0); uint16_t value = (uint16_t) index_value; uint16_t index = (uint16_t) (index_value >> 16); - if (p_cdc->ftdi.channel) { + if (p_cdc->ftdi.channel != 0) { index = (uint16_t) ((index << 8) | p_cdc->ftdi.channel); } @@ -1372,6 +1374,8 @@ static uint32_t ftdi_232bm_baud_base_to_divisor(uint32_t baud, uint32_t base) { divisor = 0; } else if (divisor == 0x4001) /* 1.5 */ { divisor = 1; + } else { + // nothing to do } return divisor; } @@ -1395,12 +1399,13 @@ static uint32_t ftdi_2232h_baud_base_to_divisor(uint32_t baud, uint32_t base) { divisor = 0; } else if (divisor == 0x4001) /* 1.5 */ { divisor = 1; + } else { + // nothing to do } - /* - * Set this bit to turn off a divide by 2.5 on baud rate generator + + /* Set this bit to turn off a divide by 2.5 on baud rate generator * This enables baud rates up to 12Mbaud but cannot reach below 1200 - * baud with this bit set - */ + * baud with this bit set */ divisor |= 0x00020000; return divisor; } @@ -1412,7 +1417,7 @@ static inline uint32_t ftdi_2232h_baud_to_divisor(uint32_t baud) { static inline uint32_t ftdi_get_divisor(cdch_interface_t *p_cdc) { uint32_t baud = p_cdc->requested_line.coding.bit_rate; uint32_t div_value = 0; - TU_VERIFY(baud); + TU_VERIFY(baud != 0); switch (p_cdc->ftdi.chip_type) { case FTDI_UNKNOWN: @@ -1552,7 +1557,8 @@ static void cp210x_internal_control_complete(cdch_interface_t *p_cdc, tuh_xfer_t p_cdc->line.coding.bit_rate = p_cdc->requested_line.coding.bit_rate; break; - default: break; + default: + break; // unsupported request } } @@ -1713,7 +1719,8 @@ static void ch34x_internal_control_complete(cdch_interface_t *p_cdc, tuh_xfer_t p_cdc->line.coding.data_bits = p_cdc->requested_line.coding.data_bits; break; - default: break; + default: + break; // unsupported } break; @@ -1721,19 +1728,20 @@ static void ch34x_internal_control_complete(cdch_interface_t *p_cdc, tuh_xfer_t p_cdc->line.control_state = p_cdc->requested_line.control_state; break; - default: break; + default: + break; // unsupported request } } static bool ch34x_set_data_format(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { const uint8_t lcr = ch34x_get_lcr(p_cdc); - TU_VERIFY(lcr); + TU_VERIFY(lcr > 0); return ch34x_write_reg(p_cdc, CH32X_REG16_LCR2_LCR, lcr, complete_cb, user_data); } static bool ch34x_set_baudrate(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { const uint16_t div_ps = ch34x_get_divisor_prescaler(p_cdc); - TU_VERIFY(div_ps); + TU_VERIFY(div_ps > 0); return ch34x_write_reg(p_cdc, CH34X_REG16_DIVISOR_PRESCALER, div_ps, complete_cb, user_data); } @@ -1916,7 +1924,8 @@ static uint8_t ch34x_get_lcr(cdch_interface_t *p_cdc) { lcr |= CH34X_LCR_ENABLE_PAR | CH34X_LCR_MARK_SPACE | CH34X_LCR_PAR_EVEN; break; - default: break; + default: + break; // invalid parity } // 1.5 stop bits not supported @@ -1999,13 +2008,15 @@ static inline bool pl2303_supports_hx_status(cdch_interface_t *p_cdc, tuh_xfer_c // return pl2303_set_request(p_cdc, PL2303_BREAK_REQUEST, PL2303_BREAK_REQUEST_TYPE, state, 0, NULL, 0); //} -static inline int pl2303_clear_halt(cdch_interface_t *p_cdc, uint8_t endp, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { +static inline bool +pl2303_clear_halt(cdch_interface_t *p_cdc, uint8_t endp, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { /* we don't care if it wasn't halted first. in fact some devices * (like some ibmcam model 1 units) seem to expect hosts to make * this request for iso endpoints, which can't halt! */ - return pl2303_set_request(p_cdc, TUSB_REQ_CLEAR_FEATURE, PL2303_CLEAR_HALT_REQUEST_TYPE, TUSB_REQ_FEATURE_EDPT_HALT, endp, - NULL, 0, complete_cb, user_data); + return pl2303_set_request( + p_cdc, TUSB_REQ_CLEAR_FEATURE, PL2303_CLEAR_HALT_REQUEST_TYPE, TUSB_REQ_FEATURE_EDPT_HALT, endp, NULL, 0, + complete_cb, user_data); } //------------- Driver API -------------// @@ -2130,10 +2141,9 @@ static bool pl2303_process_set_config(cdch_interface_t *p_cdc, tuh_xfer_t *xfer) if (type == PL2303_TYPE_NEED_SUPPORTS_HX_STATUS) { TU_ASSERT(pl2303_supports_hx_status(p_cdc, cdch_process_set_config, CONFIG_PL2303_READ1)); break; - } else { - // no transfer triggered and continue with CONFIG_PL2303_READ1 - TU_ATTR_FALLTHROUGH; } + // no transfer triggered and continue with CONFIG_PL2303_READ1 + TU_ATTR_FALLTHROUGH; case CONFIG_PL2303_READ1: // get supports_hx_status, type and quirks (step 2), do special read @@ -2378,10 +2388,12 @@ static pl2303_type_t pl2303_detect_type(cdch_interface_t *p_cdc, uint8_t step) { return PL2303_TYPE_HXN; default: - break; + break; // unknown device } break; - default: break; + + default: + break; // unknown device } TU_LOG_CDC(p_cdc, "unknown device type bcdUSB = 0x%04x", desc_dev.bcdUSB); @@ -2443,8 +2455,9 @@ static uint32_t pl2303_encode_baud_rate_divisor(uint8_t buf[PL2303_LINE_CODING_B */ baseline = 12000000 * 32; mantissa = baseline / baud; - if (mantissa == 0) + if (mantissa == 0) { mantissa = 1; /* Avoid dividing by zero if baud > 32 * 12M. */ + } exponent = 0; while (mantissa >= 512) { if (exponent < 7) { @@ -2516,7 +2529,7 @@ static bool pl2303_encode_baud_rate(cdch_interface_t *p_cdc, uint8_t buf[PL2303_ * Use direct method for supported baud rates, otherwise use divisors. * Newer chip types do not support divisor encoding. */ - if (type_data->no_divisors) { + if (type_data->no_divisors != 0) { baud_sup = baud; } else { baud_sup = pl2303_get_supported_baud_rate(baud); @@ -2524,7 +2537,7 @@ static bool pl2303_encode_baud_rate(cdch_interface_t *p_cdc, uint8_t buf[PL2303_ if (baud == baud_sup) { baud = pl2303_encode_baud_rate_direct(buf, baud); - } else if (type_data->alt_divisors) { + } else if (type_data->alt_divisors != 0) { baud = pl2303_encode_baud_rate_divisor_alt(buf, baud); } else { baud = pl2303_encode_baud_rate_divisor(buf, baud); diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index ce2884f2e..daff345c5 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -123,7 +123,10 @@ bool tuh_msc_mounted(uint8_t dev_addr) { bool tuh_msc_ready(uint8_t dev_addr) { msch_interface_t* p_msc = get_itf(dev_addr); - return p_msc->mounted && !usbh_edpt_busy(dev_addr, p_msc->ep_in) && !usbh_edpt_busy(dev_addr, p_msc->ep_out); + TU_VERIFY(p_msc->mounted); + const bool epin_busy = usbh_edpt_busy(dev_addr, p_msc->ep_in); + const bool epout_busy = usbh_edpt_busy(dev_addr, p_msc->ep_out); + return !epin_busy && !epout_busy; } //--------------------------------------------------------------------+ diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 08117283f..e0e09f5ce 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -56,14 +56,14 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); #define tu_printf CFG_TUSB_DEBUG_PRINTF #else #include - #define tu_printf printf + #define tu_printf(...) (void) printf(__VA_ARGS__) #endif TU_ATTR_ALWAYS_INLINE static inline void tu_print_buf(uint8_t const* buf, uint32_t bufsize) { for(uint32_t i=0; i= 2 diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 3b8920c01..419046b8b 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -28,7 +28,7 @@ #include "osal/osal.h" #include "tusb_fifo.h" -#define TU_FIFO_DBG 0 +#define TU_FIFO_DBG 0 // Suppress IAR warning // Warning[Pa082]: undefined behavior: the order of volatile accesses is undefined in this statement @@ -39,13 +39,13 @@ #if OSAL_MUTEX_REQUIRED TU_ATTR_ALWAYS_INLINE static inline void _ff_lock(osal_mutex_t mutex) { - if (mutex) { + if (mutex != NULL) { osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER); } } TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) { - if (mutex) { + if (mutex != NULL) { osal_mutex_unlock(mutex); } } @@ -62,14 +62,13 @@ TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) { * copy data to and from USB hardware FIFOs as needed for e.g. STM32s and others */ typedef enum { - TU_FIFO_COPY_INC, ///< Copy from/to an increasing source/destination address - default mode + TU_FIFO_COPY_INC, ///< Copy from/to an increasing source/destination address - default mode #ifdef TUP_MEM_CONST_ADDR TU_FIFO_COPY_CST_FULL_WORDS, ///< Copy from/to a constant source/destination address - required for e.g. STM32 to write into USB hardware FIFO #endif } tu_fifo_copy_mode_t; -bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_size, bool overwritable) -{ +bool tu_fifo_config(tu_fifo_t *f, void *buffer, uint16_t depth, uint16_t item_size, bool overwritable) { // Limit index space to 2*depth - this allows for a fast "modulo" calculation // but limits the maximum depth to 2^16/2 = 2^15 and buffer overflows are detectable // only if overflow happens once (important for unsupervised DMA applications) @@ -80,9 +79,9 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si _ff_lock(f->mutex_wr); _ff_lock(f->mutex_rd); - f->buffer = (uint8_t*) buffer; + f->buffer = (uint8_t *)buffer; f->depth = depth; - f->item_size = (uint16_t) (item_size & 0x7FFF); + f->item_size = (uint16_t)(item_size & 0x7FFF); f->overwritable = overwritable; f->rd_idx = 0; f->wr_idx = 0; @@ -101,18 +100,18 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si // Intended to be used to read from hardware USB FIFO in e.g. STM32 where all data is read from a constant address // Code adapted from dcd_synopsys.c // TODO generalize with configurable 1 byte or 4 byte each read -static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t len) { - volatile const uint32_t * reg_rx = (volatile const uint32_t *) app_buf; +static void _ff_push_const_addr(uint8_t *ff_buf, const void *app_buf, uint16_t len) { + const volatile uint32_t *reg_rx = (volatile const uint32_t *)app_buf; // Reading full available 32 bit words from const app address uint16_t full_words = len >> 2; - while(full_words--) { + while (full_words--) { tu_unaligned_write32(ff_buf, *reg_rx); ff_buf += 4; } // Read the remaining 1-3 bytes from const app address - uint8_t const bytes_rem = len & 0x03; + const uint8_t bytes_rem = len & 0x03; if (bytes_rem) { uint32_t tmp32 = *reg_rx; memcpy(ff_buf, &tmp32, bytes_rem); @@ -121,18 +120,18 @@ static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t // Intended to be used to write to hardware USB FIFO in e.g. STM32 // where all data is written to a constant address in full word copies -static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t len) { - volatile uint32_t * reg_tx = (volatile uint32_t *) app_buf; +static void _ff_pull_const_addr(void *app_buf, const uint8_t *ff_buf, uint16_t len) { + volatile uint32_t *reg_tx = (volatile uint32_t *)app_buf; // Write full available 32 bit words to const address uint16_t full_words = len >> 2; - while(full_words--) { + while (full_words--) { *reg_tx = tu_unaligned_read32(ff_buf); ff_buf += 4; } // Write the remaining 1-3 bytes into const address - uint8_t const bytes_rem = len & 0x03; + const uint8_t bytes_rem = len & 0x03; if (bytes_rem) { uint32_t tmp32 = 0; memcpy(&tmp32, ff_buf, bytes_rem); @@ -143,32 +142,27 @@ static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t #endif // send one item to fifo WITHOUT updating write pointer -static inline void _ff_push(tu_fifo_t* f, void const * app_buf, uint16_t rel) { +static inline void _ff_push(tu_fifo_t *f, const void *app_buf, uint16_t rel) { memcpy(f->buffer + (rel * f->item_size), app_buf, f->item_size); } // send n items to fifo WITHOUT updating write pointer -static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t wr_ptr, tu_fifo_copy_mode_t copy_mode) -{ - uint16_t const lin_count = f->depth - wr_ptr; - uint16_t const wrap_count = n - lin_count; +static void _ff_push_n(tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, tu_fifo_copy_mode_t copy_mode) { + const uint16_t lin_count = f->depth - wr_ptr; + const uint16_t wrap_count = n - lin_count; - uint16_t lin_bytes = lin_count * f->item_size; + uint16_t lin_bytes = lin_count * f->item_size; uint16_t wrap_bytes = wrap_count * f->item_size; // current buffer of fifo - uint8_t* ff_buf = f->buffer + (wr_ptr * f->item_size); + uint8_t *ff_buf = f->buffer + (wr_ptr * f->item_size); - switch (copy_mode) - { + switch (copy_mode) { case TU_FIFO_COPY_INC: - if(n <= lin_count) - { + if (n <= lin_count) { // Linear only - memcpy(ff_buf, app_buf, n*f->item_size); - } - else - { + memcpy(ff_buf, app_buf, n * f->item_size); + } else { // Wrap around // Write data to linear part of buffer @@ -176,19 +170,17 @@ static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t // Write data wrapped around // TU_ASSERT(nWrap_bytes <= f->depth, ); - memcpy(f->buffer, ((uint8_t const*) app_buf) + lin_bytes, wrap_bytes); + memcpy(f->buffer, ((const uint8_t *)app_buf) + lin_bytes, wrap_bytes); } break; + #ifdef TUP_MEM_CONST_ADDR case TU_FIFO_COPY_CST_FULL_WORDS: // Intended for hardware buffers from which it can be read word by word only - if(n <= lin_count) - { + if (n <= lin_count) { // Linear only - _ff_push_const_addr(ff_buf, app_buf, n*f->item_size); - } - else - { + _ff_push_const_addr(ff_buf, app_buf, n * f->item_size); + } else { // Wrap around case // Write full words to linear part of buffer @@ -198,83 +190,80 @@ static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t // There could be odd 1-3 bytes before the wrap-around boundary uint8_t rem = lin_bytes & 0x03; - if (rem > 0) - { - volatile const uint32_t * rx_fifo = (volatile const uint32_t *) app_buf; + if (rem > 0) { + const volatile uint32_t *rx_fifo = (volatile const uint32_t *)app_buf; - uint8_t remrem = (uint8_t) tu_min16(wrap_bytes, 4-rem); + uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, 4 - rem); wrap_bytes -= remrem; - uint32_t tmp32 = *rx_fifo; - uint8_t * src_u8 = ((uint8_t *) &tmp32); + uint32_t tmp32 = *rx_fifo; + uint8_t *src_u8 = ((uint8_t *)&tmp32); // Write 1-3 bytes before wrapped boundary - while(rem--) *ff_buf++ = *src_u8++; + while (rem--) { + *ff_buf++ = *src_u8++; + } // Read more bytes to beginning to complete a word ff_buf = f->buffer; - while(remrem--) *ff_buf++ = *src_u8++; - } - else - { + while (remrem--) { + *ff_buf++ = *src_u8++; + } + } else { ff_buf = f->buffer; // wrap around to beginning } // Write data wrapped part - if (wrap_bytes > 0) _ff_push_const_addr(ff_buf, app_buf, wrap_bytes); + if (wrap_bytes > 0) { + _ff_push_const_addr(ff_buf, app_buf, wrap_bytes); + } } break; #endif - default: break; + + default: + break; // unknown mode } } // get one item from fifo WITHOUT updating read pointer -static inline void _ff_pull(tu_fifo_t* f, void * app_buf, uint16_t rel) -{ +static inline void _ff_pull(tu_fifo_t *f, void *app_buf, uint16_t rel) { memcpy(app_buf, f->buffer + (rel * f->item_size), f->item_size); } // get n items from fifo WITHOUT updating read pointer -static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, tu_fifo_copy_mode_t copy_mode) -{ - uint16_t const lin_count = f->depth - rd_ptr; - uint16_t const wrap_count = n - lin_count; // only used if wrapped +static void _ff_pull_n(tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, tu_fifo_copy_mode_t copy_mode) { + const uint16_t lin_count = f->depth - rd_ptr; + const uint16_t wrap_count = n - lin_count; // only used if wrapped - uint16_t lin_bytes = lin_count * f->item_size; + uint16_t lin_bytes = lin_count * f->item_size; uint16_t wrap_bytes = wrap_count * f->item_size; // current buffer of fifo - uint8_t* ff_buf = f->buffer + (rd_ptr * f->item_size); + uint8_t *ff_buf = f->buffer + (rd_ptr * f->item_size); - switch (copy_mode) - { + switch (copy_mode) { case TU_FIFO_COPY_INC: - if ( n <= lin_count ) - { + if (n <= lin_count) { // Linear only - memcpy(app_buf, ff_buf, n*f->item_size); - } - else - { + memcpy(app_buf, ff_buf, n * f->item_size); + } else { // Wrap around // Read data from linear part of buffer memcpy(app_buf, ff_buf, lin_bytes); // Read data wrapped part - memcpy((uint8_t*) app_buf + lin_bytes, f->buffer, wrap_bytes); + memcpy((uint8_t *)app_buf + lin_bytes, f->buffer, wrap_bytes); } - break; + break; + #ifdef TUP_MEM_CONST_ADDR case TU_FIFO_COPY_CST_FULL_WORDS: - if ( n <= lin_count ) - { + if (n <= lin_count) { // Linear only - _ff_pull_const_addr(app_buf, ff_buf, n*f->item_size); - } - else - { + _ff_pull_const_addr(app_buf, ff_buf, n * f->item_size); + } else { // Wrap around case // Read full words from linear part of buffer @@ -284,36 +273,41 @@ static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, // There could be odd 1-3 bytes before the wrap-around boundary uint8_t rem = lin_bytes & 0x03; - if (rem > 0) - { - volatile uint32_t * reg_tx = (volatile uint32_t *) app_buf; + if (rem > 0) { + volatile uint32_t *reg_tx = (volatile uint32_t *)app_buf; - uint8_t remrem = (uint8_t) tu_min16(wrap_bytes, 4-rem); + uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, 4 - rem); wrap_bytes -= remrem; - uint32_t tmp32=0; - uint8_t * dst_u8 = (uint8_t *)&tmp32; + uint32_t tmp32 = 0; + uint8_t *dst_u8 = (uint8_t *)&tmp32; // Read 1-3 bytes before wrapped boundary - while(rem--) *dst_u8++ = *ff_buf++; + while (rem--) { + *dst_u8++ = *ff_buf++; + } // Read more bytes from beginning to complete a word ff_buf = f->buffer; - while(remrem--) *dst_u8++ = *ff_buf++; + while (remrem--) { + *dst_u8++ = *ff_buf++; + } *reg_tx = tmp32; - } - else - { + } else { ff_buf = f->buffer; // wrap around to beginning } // Read data wrapped part - if (wrap_bytes > 0) _ff_pull_const_addr(app_buf, ff_buf, wrap_bytes); + if (wrap_bytes > 0) { + _ff_pull_const_addr(app_buf, ff_buf, wrap_bytes); + } } - break; + break; #endif - default: break; + + default: + break; // unknown mode } } @@ -322,24 +316,18 @@ static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, //--------------------------------------------------------------------+ // return only the index difference and as such can be used to determine an overflow i.e overflowable count -TU_ATTR_ALWAYS_INLINE static inline -uint16_t _ff_count(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) -{ +TU_ATTR_ALWAYS_INLINE static inline uint16_t _ff_count(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) { // In case we have non-power of two depth we need a further modification - if (wr_idx >= rd_idx) - { - return (uint16_t) (wr_idx - rd_idx); - } else - { - return (uint16_t) (2*depth - (rd_idx - wr_idx)); + if (wr_idx >= rd_idx) { + return (uint16_t)(wr_idx - rd_idx); + } else { + return (uint16_t)(2 * depth - (rd_idx - wr_idx)); } } // return remaining slot in fifo -TU_ATTR_ALWAYS_INLINE static inline -uint16_t _ff_remaining(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) -{ - uint16_t const count = _ff_count(depth, wr_idx, rd_idx); +TU_ATTR_ALWAYS_INLINE static inline uint16_t _ff_remaining(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) { + const uint16_t count = _ff_count(depth, wr_idx, rd_idx); return (depth > count) ? (depth - count) : 0; } @@ -349,16 +337,14 @@ uint16_t _ff_remaining(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) // Advance an absolute index // "absolute" index is only in the range of [0..2*depth) -static uint16_t advance_index(uint16_t depth, uint16_t idx, uint16_t offset) -{ +static uint16_t advance_index(uint16_t depth, uint16_t idx, uint16_t offset) { // We limit the index space of p such that a correct wrap around happens // Check for a wrap around or if we are in unused index space - This has to be checked first!! // We are exploiting the wrap around to the correct index - uint16_t new_idx = (uint16_t) (idx + offset); - if ( (idx > new_idx) || (new_idx >= 2*depth) ) - { - uint16_t const non_used_index_space = (uint16_t) (UINT16_MAX - (2*depth-1)); - new_idx = (uint16_t) (new_idx + non_used_index_space); + uint16_t new_idx = (uint16_t)(idx + offset); + if ((idx > new_idx) || (new_idx >= 2 * depth)) { + const uint16_t non_used_index_space = (uint16_t)(UINT16_MAX - (2 * depth - 1)); + new_idx = (uint16_t)(new_idx + non_used_index_space); } return new_idx; @@ -366,14 +352,12 @@ static uint16_t advance_index(uint16_t depth, uint16_t idx, uint16_t offset) #if 0 // not used but // Backward an absolute index -static uint16_t backward_index(uint16_t depth, uint16_t idx, uint16_t offset) -{ +static uint16_t backward_index(uint16_t depth, uint16_t idx, uint16_t offset) { // We limit the index space of p such that a correct wrap around happens // Check for a wrap around or if we are in unused index space - This has to be checked first!! // We are exploiting the wrap around to the correct index uint16_t new_idx = (uint16_t) (idx - offset); - if ( (idx < new_idx) || (new_idx >= 2*depth) ) - { + if ( (idx < new_idx) || (new_idx >= 2*depth) ) { uint16_t const non_used_index_space = (uint16_t) (UINT16_MAX - (2*depth-1)); new_idx = (uint16_t) (new_idx - non_used_index_space); } @@ -383,26 +367,22 @@ static uint16_t backward_index(uint16_t depth, uint16_t idx, uint16_t offset) #endif // index to pointer, simply an modulo with minus. -TU_ATTR_ALWAYS_INLINE static inline -uint16_t idx2ptr(uint16_t depth, uint16_t idx) -{ +TU_ATTR_ALWAYS_INLINE static inline uint16_t idx2ptr(uint16_t depth, uint16_t idx) { // Only run at most 3 times since index is limit in the range of [0..2*depth) - while ( idx >= depth ) idx -= depth; + while (idx >= depth) { + idx -= depth; + } return idx; } // Works on local copies of w // When an overwritable fifo is overflowed, rd_idx will be re-index so that it forms // an full fifo i.e _ff_count() = depth -TU_ATTR_ALWAYS_INLINE static inline -uint16_t _ff_correct_read_index(tu_fifo_t* f, uint16_t wr_idx) -{ +TU_ATTR_ALWAYS_INLINE static inline uint16_t _ff_correct_read_index(tu_fifo_t *f, uint16_t wr_idx) { uint16_t rd_idx; - if ( wr_idx >= f->depth ) - { + if (wr_idx >= f->depth) { rd_idx = wr_idx - f->depth; - }else - { + } else { rd_idx = wr_idx + f->depth; } @@ -413,16 +393,16 @@ uint16_t _ff_correct_read_index(tu_fifo_t* f, uint16_t wr_idx) // Works on local copies of w and r // Must be protected by mutexes since in case of an overflow read pointer gets modified -static bool _tu_fifo_peek(tu_fifo_t* f, void * p_buffer, uint16_t wr_idx, uint16_t rd_idx) -{ +static bool _tu_fifo_peek(tu_fifo_t *f, void *p_buffer, uint16_t wr_idx, uint16_t rd_idx) { uint16_t cnt = _ff_count(f->depth, wr_idx, rd_idx); // nothing to peek - if ( cnt == 0 ) return false; + if (cnt == 0) { + return false; + } // Check overflow and correct if required - if ( cnt > f->depth ) - { + if (cnt > f->depth) { rd_idx = _ff_correct_read_index(f, wr_idx); } @@ -436,22 +416,25 @@ static bool _tu_fifo_peek(tu_fifo_t* f, void * p_buffer, uint16_t wr_idx, uint16 // Works on local copies of w and r // Must be protected by mutexes since in case of an overflow read pointer gets modified -static uint16_t _tu_fifo_peek_n(tu_fifo_t* f, void * p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, tu_fifo_copy_mode_t copy_mode) -{ +static uint16_t _tu_fifo_peek_n( + tu_fifo_t *f, void *p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, tu_fifo_copy_mode_t copy_mode) { uint16_t cnt = _ff_count(f->depth, wr_idx, rd_idx); // nothing to peek - if ( cnt == 0 ) return 0; + if (cnt == 0) { + return 0; + } // Check overflow and correct if required - if ( cnt > f->depth ) - { + if (cnt > f->depth) { rd_idx = _ff_correct_read_index(f, wr_idx); - cnt = f->depth; + cnt = f->depth; } // Check if we can read something at and after offset - if too less is available we read what remains - if ( cnt < n ) n = cnt; + if (cnt < n) { + n = cnt; + } uint16_t rd_ptr = idx2ptr(f->depth, rd_idx); @@ -461,40 +444,36 @@ static uint16_t _tu_fifo_peek_n(tu_fifo_t* f, void * p_buffer, uint16_t n, uint1 return n; } -static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu_fifo_copy_mode_t copy_mode) -{ - if ( n == 0 ) return 0; +static uint16_t _tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n, tu_fifo_copy_mode_t copy_mode) { + if (n == 0) { + return 0; + } _ff_lock(f->mutex_wr); uint16_t wr_idx = f->wr_idx; uint16_t rd_idx = f->rd_idx; - uint8_t const* buf8 = (uint8_t const*) data; + const uint8_t *buf8 = (const uint8_t *)data; - TU_LOG(TU_FIFO_DBG, "rd = %3u, wr = %3u, count = %3u, remain = %3u, n = %3u: ", - rd_idx, wr_idx, _ff_count(f->depth, wr_idx, rd_idx), _ff_remaining(f->depth, wr_idx, rd_idx), n); + TU_LOG( + TU_FIFO_DBG, "rd = %3u, wr = %3u, count = %3u, remain = %3u, n = %3u: ", rd_idx, wr_idx, + _ff_count(f->depth, wr_idx, rd_idx), _ff_remaining(f->depth, wr_idx, rd_idx), n); - if ( !f->overwritable ) - { + if (!f->overwritable) { // limit up to full - uint16_t const remain = _ff_remaining(f->depth, wr_idx, rd_idx); - n = tu_min16(n, remain); - } - else - { + const uint16_t remain = _ff_remaining(f->depth, wr_idx, rd_idx); + n = tu_min16(n, remain); + } else { // In over-writable mode, fifo_write() is allowed even when fifo is full. In such case, // oldest data in fifo i.e at read pointer data will be overwritten // Note: we can modify read buffer contents but we must not modify the read index itself within a write function! // Since it would end up in a race condition with read functions! - if ( n >= f->depth ) - { + if (n >= f->depth) { // Only copy last part - if ( copy_mode == TU_FIFO_COPY_INC ) - { + if (copy_mode == TU_FIFO_COPY_INC) { buf8 += (n - f->depth) * f->item_size; - }else - { + } else { // TODO should read from hw fifo to discard data, however reading an odd number could // accidentally discard data. } @@ -503,12 +482,9 @@ static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu // We start writing at the read pointer's position since we fill the whole buffer wr_idx = rd_idx; - } - else - { - uint16_t const overflowable_count = _ff_count(f->depth, wr_idx, rd_idx); - if (overflowable_count + n >= 2*f->depth) - { + } else { + const uint16_t overflowable_count = _ff_count(f->depth, wr_idx, rd_idx); + if (overflowable_count + n >= 2 * f->depth) { // Double overflowed // Index is bigger than the allowed range [0,2*depth) // re-position write index to have a full fifo after pushed @@ -518,8 +494,7 @@ static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu // However memmove() is expensive due to actual copying + wrapping consideration. // Also race condition could happen anyway if read() is invoke while moving result in corrupted memory // currently deliberately not implemented --> result in incorrect data read back - }else - { + } else { // normal + single overflowed: // Index is in the range of [0,2*depth) and thus detect and recoverable. Recovering is handled in read() // Therefore we just increase write index @@ -528,16 +503,11 @@ static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu } } - if (n) - { + if (n) { uint16_t wr_ptr = idx2ptr(f->depth, wr_idx); - TU_LOG(TU_FIFO_DBG, "actual_n = %u, wr_ptr = %u", n, wr_ptr); - // Write data _ff_push_n(f, buf8, n, wr_ptr, copy_mode); - - // Advance index f->wr_idx = advance_index(f->depth, wr_idx, n); TU_LOG(TU_FIFO_DBG, "\tnew_wr = %u\r\n", f->wr_idx); @@ -548,8 +518,7 @@ static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu return n; } -static uint16_t _tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n, tu_fifo_copy_mode_t copy_mode) -{ +static uint16_t _tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n, tu_fifo_copy_mode_t copy_mode) { _ff_lock(f->mutex_rd); // Peek the data @@ -582,8 +551,7 @@ static uint16_t _tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n, tu_fifo @returns Number of items in FIFO */ /******************************************************************************/ -uint16_t tu_fifo_count(tu_fifo_t* f) -{ +uint16_t tu_fifo_count(tu_fifo_t *f) { return tu_min16(_ff_count(f->depth, f->wr_idx, f->rd_idx), f->depth); } @@ -600,8 +568,7 @@ uint16_t tu_fifo_count(tu_fifo_t* f) @returns Number of items in FIFO */ /******************************************************************************/ -bool tu_fifo_empty(tu_fifo_t* f) -{ +bool tu_fifo_empty(tu_fifo_t *f) { return f->wr_idx == f->rd_idx; } @@ -618,8 +585,7 @@ bool tu_fifo_empty(tu_fifo_t* f) @returns Number of items in FIFO */ /******************************************************************************/ -bool tu_fifo_full(tu_fifo_t* f) -{ +bool tu_fifo_full(tu_fifo_t *f) { return _ff_count(f->depth, f->wr_idx, f->rd_idx) >= f->depth; } @@ -636,8 +602,7 @@ bool tu_fifo_full(tu_fifo_t* f) @returns Number of items in FIFO */ /******************************************************************************/ -uint16_t tu_fifo_remaining(tu_fifo_t* f) -{ +uint16_t tu_fifo_remaining(tu_fifo_t *f) { return _ff_remaining(f->depth, f->wr_idx, f->rd_idx); } @@ -662,14 +627,12 @@ uint16_t tu_fifo_remaining(tu_fifo_t* f) @returns True if overflow happened */ /******************************************************************************/ -bool tu_fifo_overflowed(tu_fifo_t* f) -{ +bool tu_fifo_overflowed(tu_fifo_t *f) { return _ff_count(f->depth, f->wr_idx, f->rd_idx) > f->depth; } // Only use in case tu_fifo_overflow() returned true! -void tu_fifo_correct_read_pointer(tu_fifo_t* f) -{ +void tu_fifo_correct_read_pointer(tu_fifo_t *f) { _ff_lock(f->mutex_rd); _ff_correct_read_index(f, f->wr_idx); _ff_unlock(f->mutex_rd); @@ -691,8 +654,7 @@ void tu_fifo_correct_read_pointer(tu_fifo_t* f) @returns TRUE if the queue is not empty */ /******************************************************************************/ -bool tu_fifo_read(tu_fifo_t* f, void * buffer) -{ +bool tu_fifo_read(tu_fifo_t *f, void *buffer) { _ff_lock(f->mutex_rd); // Peek the data @@ -722,8 +684,7 @@ bool tu_fifo_read(tu_fifo_t* f, void * buffer) @returns number of items read from the FIFO */ /******************************************************************************/ -uint16_t tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n) -{ +uint16_t tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n) { return _tu_fifo_read_n(f, buffer, n, TU_FIFO_COPY_INC); } @@ -745,8 +706,7 @@ uint16_t tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n) @returns number of items read from the FIFO */ /******************************************************************************/ -uint16_t tu_fifo_read_n_const_addr_full_words(tu_fifo_t* f, void * buffer, uint16_t n) -{ +uint16_t tu_fifo_read_n_const_addr_full_words(tu_fifo_t *f, void *buffer, uint16_t n) { return _tu_fifo_read_n(f, buffer, n, TU_FIFO_COPY_CST_FULL_WORDS); } #endif @@ -764,8 +724,7 @@ uint16_t tu_fifo_read_n_const_addr_full_words(tu_fifo_t* f, void * buffer, uint1 @returns TRUE if the queue is not empty */ /******************************************************************************/ -bool tu_fifo_peek(tu_fifo_t* f, void * p_buffer) -{ +bool tu_fifo_peek(tu_fifo_t *f, void *p_buffer) { _ff_lock(f->mutex_rd); bool ret = _tu_fifo_peek(f, p_buffer, f->wr_idx, f->rd_idx); _ff_unlock(f->mutex_rd); @@ -787,8 +746,7 @@ bool tu_fifo_peek(tu_fifo_t* f, void * p_buffer) @returns Number of bytes written to p_buffer */ /******************************************************************************/ -uint16_t tu_fifo_peek_n(tu_fifo_t* f, void * p_buffer, uint16_t n) -{ +uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n) { _ff_lock(f->mutex_rd); uint16_t ret = _tu_fifo_peek_n(f, p_buffer, n, f->wr_idx, f->rd_idx, TU_FIFO_COPY_INC); _ff_unlock(f->mutex_rd); @@ -811,27 +769,19 @@ uint16_t tu_fifo_peek_n(tu_fifo_t* f, void * p_buffer, uint16_t n) FIFO will always return TRUE) */ /******************************************************************************/ -bool tu_fifo_write(tu_fifo_t* f, const void * data) -{ +bool tu_fifo_write(tu_fifo_t *f, const void *data) { _ff_lock(f->mutex_wr); - bool ret; - uint16_t const wr_idx = f->wr_idx; + bool ret; + const uint16_t wr_idx = f->wr_idx; - if ( tu_fifo_full(f) && !f->overwritable ) - { + if (tu_fifo_full(f) && !f->overwritable) { ret = false; - }else - { + } else { uint16_t wr_ptr = idx2ptr(f->depth, wr_idx); - - // Write data _ff_push(f, data, wr_ptr); - - // Advance pointer f->wr_idx = advance_index(f->depth, wr_idx, 1); - - ret = true; + ret = true; } _ff_unlock(f->mutex_wr); @@ -853,8 +803,7 @@ bool tu_fifo_write(tu_fifo_t* f, const void * data) @return Number of written elements */ /******************************************************************************/ -uint16_t tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n) -{ +uint16_t tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n) { return _tu_fifo_write_n(f, data, n, TU_FIFO_COPY_INC); } @@ -874,8 +823,7 @@ uint16_t tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n) @return Number of written elements */ /******************************************************************************/ -uint16_t tu_fifo_write_n_const_addr_full_words(tu_fifo_t* f, const void * data, uint16_t n) -{ +uint16_t tu_fifo_write_n_const_addr_full_words(tu_fifo_t *f, const void *data, uint16_t n) { return _tu_fifo_write_n(f, data, n, TU_FIFO_COPY_CST_FULL_WORDS); } #endif @@ -888,8 +836,7 @@ uint16_t tu_fifo_write_n_const_addr_full_words(tu_fifo_t* f, const void * data, Pointer to the FIFO buffer to manipulate */ /******************************************************************************/ -bool tu_fifo_clear(tu_fifo_t *f) -{ +bool tu_fifo_clear(tu_fifo_t *f) { _ff_lock(f->mutex_wr); _ff_lock(f->mutex_rd); @@ -943,8 +890,7 @@ bool tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { Number of items the write pointer moves forward */ /******************************************************************************/ -void tu_fifo_advance_write_pointer(tu_fifo_t *f, uint16_t n) -{ +void tu_fifo_advance_write_pointer(tu_fifo_t *f, uint16_t n) { f->wr_idx = advance_index(f->depth, f->wr_idx, n); } @@ -964,8 +910,7 @@ void tu_fifo_advance_write_pointer(tu_fifo_t *f, uint16_t n) Number of items the read pointer moves forward */ /******************************************************************************/ -void tu_fifo_advance_read_pointer(tu_fifo_t *f, uint16_t n) -{ +void tu_fifo_advance_read_pointer(tu_fifo_t *f, uint16_t n) { f->rd_idx = advance_index(f->depth, f->rd_idx, n); } @@ -984,8 +929,7 @@ void tu_fifo_advance_read_pointer(tu_fifo_t *f, uint16_t n) Pointer to struct which holds the desired infos */ /******************************************************************************/ -void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) -{ +void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) { // Operate on temporary values in case they change in between uint16_t wr_idx = f->wr_idx; uint16_t rd_idx = f->rd_idx; @@ -993,8 +937,7 @@ void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) uint16_t cnt = _ff_count(f->depth, wr_idx, rd_idx); // Check overflow and correct if required - may happen in case a DMA wrote too fast - if (cnt > f->depth) - { + if (cnt > f->depth) { _ff_lock(f->mutex_rd); rd_idx = _ff_correct_read_index(f, wr_idx); _ff_unlock(f->mutex_rd); @@ -1003,8 +946,7 @@ void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) } // Check if fifo is empty - if (cnt == 0) - { + if (cnt == 0) { info->len_lin = 0; info->len_wrap = 0; info->ptr_lin = NULL; @@ -1020,17 +962,14 @@ void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) info->ptr_lin = &f->buffer[rd_ptr]; // Check if there is a wrap around necessary - if (wr_ptr > rd_ptr) - { + if (wr_ptr > rd_ptr) { // Non wrapping case - info->len_lin = cnt; + info->len_lin = cnt; info->len_wrap = 0; info->ptr_wrap = NULL; - } - else - { - info->len_lin = f->depth - rd_ptr; // Also the case if FIFO was full + } else { + info->len_lin = f->depth - rd_ptr; // Also the case if FIFO was full info->len_wrap = cnt - info->len_lin; info->ptr_wrap = f->buffer; @@ -1052,14 +991,12 @@ void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) Pointer to struct which holds the desired infos */ /******************************************************************************/ -void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) -{ +void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) { uint16_t wr_idx = f->wr_idx; uint16_t rd_idx = f->rd_idx; uint16_t remain = _ff_remaining(f->depth, wr_idx, rd_idx); - if (remain == 0) - { + if (remain == 0) { info->len_lin = 0; info->len_wrap = 0; info->ptr_lin = NULL; @@ -1074,15 +1011,12 @@ void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) // Copy pointer to buffer to start writing to info->ptr_lin = &f->buffer[wr_ptr]; - if (wr_ptr < rd_ptr) - { + if (wr_ptr < rd_ptr) { // Non wrapping case - info->len_lin = rd_ptr-wr_ptr; + info->len_lin = rd_ptr - wr_ptr; info->len_wrap = 0; info->ptr_wrap = NULL; - } - else - { + } else { info->len_lin = f->depth - wr_ptr; info->len_wrap = remain - info->len_lin; // Remaining length - n already was limited to remain or FIFO depth info->ptr_wrap = f->buffer; // Always start of buffer diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index f2a6c5469..0f4ba00d8 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -104,16 +104,16 @@ extern "C" { * | R | 1 | 2 | W | 4 | 5 | */ typedef struct { - uint8_t* buffer ; // buffer pointer - uint16_t depth ; // max items + uint8_t *buffer; // buffer pointer + uint16_t depth; // max items struct TU_ATTR_PACKED { - uint16_t item_size : 15; // size of each item - bool overwritable : 1 ; // ovwerwritable when full + uint16_t item_size : 15; // size of each item + bool overwritable : 1; // ovwerwritable when full }; - volatile uint16_t wr_idx ; // write index - volatile uint16_t rd_idx ; // read index + volatile uint16_t wr_idx; // write index + volatile uint16_t rd_idx; // read index #if OSAL_MUTEX_REQUIRED osal_mutex_t mutex_wr; @@ -129,12 +129,13 @@ typedef struct { void * ptr_wrap ; ///< wrapped part start pointer } tu_fifo_buffer_info_t; -#define TU_FIFO_INIT(_buffer, _depth, _type, _overwritable){\ - .buffer = _buffer, \ - .depth = _depth, \ - .item_size = sizeof(_type), \ - .overwritable = _overwritable, \ -} +#define TU_FIFO_INIT(_buffer, _depth, _type, _overwritable) \ + { \ + .buffer = _buffer, \ + .depth = _depth, \ + .item_size = sizeof(_type), \ + .overwritable = _overwritable, \ + } #define TU_FIFO_DEF(_name, _depth, _type, _overwritable) \ uint8_t _name##_buf[_depth*sizeof(_type)]; \ diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 5e1d59233..dcd5c45d6 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -40,6 +40,12 @@ extern tusb_role_t _tusb_rhport_role[TUP_USBIP_CONTROLLER_NUM]; // Endpoint //--------------------------------------------------------------------+ +enum { + TU_EDPT_STATE_BUSY = 0x01, + TU_EDPT_STATE_STALLED = 0x02, + TU_EDPT_STATE_CLAIMED = 0x04, +}; + typedef struct TU_ATTR_PACKED { volatile uint8_t busy : 1; volatile uint8_t stalled : 1; @@ -48,8 +54,8 @@ typedef struct TU_ATTR_PACKED { typedef struct { struct TU_ATTR_PACKED { - uint8_t is_host : 1; // 1: host, 0: device - uint8_t is_mps512 : 1; // 1: 512, 0: 64 since stream is used for Bulk only + bool is_host : 1; // 1: host, 0: device + bool is_mps512 : 1; // 1: 512, 0: 64 since stream is used for Bulk only }; uint8_t ep_addr; uint16_t ep_bufsize; @@ -93,21 +99,18 @@ bool tu_edpt_stream_init(tu_edpt_stream_t* s, bool is_host, bool is_tx, bool ove bool tu_edpt_stream_deinit(tu_edpt_stream_t* s); // Open an stream for an endpoint -TU_ATTR_ALWAYS_INLINE static inline -void tu_edpt_stream_open(tu_edpt_stream_t* s, tusb_desc_endpoint_t const *desc_ep) { +TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_open(tu_edpt_stream_t* s, tusb_desc_endpoint_t const *desc_ep) { tu_fifo_clear(&s->ff); s->ep_addr = desc_ep->bEndpointAddress; - s->is_mps512 = (tu_edpt_packet_size(desc_ep) == 512) ? 1 : 0; + s->is_mps512 = tu_edpt_packet_size(desc_ep) == 512; } -TU_ATTR_ALWAYS_INLINE static inline -void tu_edpt_stream_close(tu_edpt_stream_t* s) { +TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_close(tu_edpt_stream_t* s) { s->ep_addr = 0; } // Clear fifo -TU_ATTR_ALWAYS_INLINE static inline -bool tu_edpt_stream_clear(tu_edpt_stream_t* s) { +TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_clear(tu_edpt_stream_t* s) { return tu_fifo_clear(&s->ff); } diff --git a/src/tusb.c b/src/tusb.c index be67eead2..7411f19df 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -117,11 +117,15 @@ bool tusb_inited(void) { bool ret = false; #if CFG_TUD_ENABLED - ret = ret || tud_inited(); + if (tud_inited()) { + ret = true; + } #endif #if CFG_TUH_ENABLED - ret = ret || tuh_inited(); + if (tuh_inited()) { + ret = true; + } #endif return ret; @@ -209,7 +213,8 @@ bool tu_edpt_claim(tu_edpt_state_t* ep_state, osal_mutex_t mutex) { (void) mutex; // pre-check to help reducing mutex lock - TU_VERIFY((ep_state->busy == 0) && (ep_state->claimed == 0)); + TU_VERIFY(ep_state->busy == 0); + TU_VERIFY(ep_state->claimed == 0); (void) osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER); // can only claim the endpoint if it is not busy and not claimed yet. @@ -298,7 +303,7 @@ uint16_t tu_desc_get_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t const* p_desc = (uint8_t const*) desc_itf; uint16_t len = 0; - while (itf_count--) { + while ((itf_count--) > 0) { // Next on interface desc len += tu_desc_len(desc_itf); p_desc = tu_desc_next(p_desc); @@ -337,7 +342,7 @@ bool tu_edpt_stream_init(tu_edpt_stream_t* s, bool is_host, bool is_tx, bool ove tu_fifo_config(&s->ff, ff_buf, ff_bufsize, 1, overwritable); #if OSAL_MUTEX_REQUIRED - if (ff_buf && ff_bufsize) { + if (ff_buf != NULL && ff_bufsize > 0) { osal_mutex_t new_mutex = osal_mutex_create(&s->ff_mutexdef); tu_fifo_config_mutex(&s->ff, is_tx ? new_mutex : NULL, is_tx ? NULL : new_mutex); } @@ -352,9 +357,13 @@ bool tu_edpt_stream_init(tu_edpt_stream_t* s, bool is_host, bool is_tx, bool ove bool tu_edpt_stream_deinit(tu_edpt_stream_t* s) { (void) s; #if OSAL_MUTEX_REQUIRED - if (s->ff.mutex_wr) osal_mutex_delete(s->ff.mutex_wr); - if (s->ff.mutex_rd) osal_mutex_delete(s->ff.mutex_rd); - #endif + if (s->ff.mutex_wr) { + osal_mutex_delete(s->ff.mutex_wr); + } + if (s->ff.mutex_rd) { + osal_mutex_delete(s->ff.mutex_rd); + } +#endif return true; } @@ -403,7 +412,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool stream_release(uint8_t hwid, tu_edpt_st bool tu_edpt_stream_write_zlp_if_needed(uint8_t hwid, tu_edpt_stream_t* s, uint32_t last_xferred_bytes) { // ZLP condition: no pending data, last transferred bytes is multiple of packet size const uint16_t mps = s->is_mps512 ? TUSB_EPSIZE_BULK_HS : TUSB_EPSIZE_BULK_FS; - TU_VERIFY(!tu_fifo_count(&s->ff) && last_xferred_bytes && (0 == (last_xferred_bytes & (mps - 1)))); + TU_VERIFY(!tu_fifo_count(&s->ff) && last_xferred_bytes > 0 && (0 == (last_xferred_bytes & (mps - 1)))); TU_VERIFY(stream_claim(hwid, s)); TU_ASSERT(stream_xfer(hwid, s, 0)); return true; @@ -411,14 +420,13 @@ bool tu_edpt_stream_write_zlp_if_needed(uint8_t hwid, tu_edpt_stream_t* s, uint3 uint32_t tu_edpt_stream_write_xfer(uint8_t hwid, tu_edpt_stream_t* s) { // skip if no data - TU_VERIFY(tu_fifo_count(&s->ff), 0); - + TU_VERIFY(tu_fifo_count(&s->ff) > 0, 0); TU_VERIFY(stream_claim(hwid, s), 0); // Pull data from FIFO -> EP buf uint16_t const count = tu_fifo_read_n(&s->ff, s->ep_buf, s->ep_bufsize); - if (count) { + if (count > 0) { TU_ASSERT(stream_xfer(hwid, s, count), 0); return count; } else { @@ -430,7 +438,7 @@ uint32_t tu_edpt_stream_write_xfer(uint8_t hwid, tu_edpt_stream_t* s) { } uint32_t tu_edpt_stream_write(uint8_t hwid, tu_edpt_stream_t* s, void const* buffer, uint32_t bufsize) { - TU_VERIFY(bufsize); // TODO support ZLP + TU_VERIFY(bufsize > 0); // TODO support ZLP if (0 == tu_fifo_depth(&s->ff)) { // no fifo for buffered @@ -453,7 +461,7 @@ uint32_t tu_edpt_stream_write(uint8_t hwid, tu_edpt_stream_t* s, void const* buf } uint32_t tu_edpt_stream_write_available(uint8_t hwid, tu_edpt_stream_t* s) { - if (tu_fifo_depth(&s->ff)) { + if (tu_fifo_depth(&s->ff) > 0) { return (uint32_t) tu_fifo_remaining(&s->ff); } else { bool is_busy = true; @@ -596,7 +604,7 @@ void tu_print_mem(void const* buf, uint32_t count, uint8_t indent) { // fill up last row to 16 for printing ascii const uint32_t remain = count % 16; uint8_t nback = (uint8_t) (remain ? remain : 16); - if (remain) { + if (remain > 0) { for (uint32_t i = 0; i < 16 - remain; i++) { tu_printf(" "); for (int j = 0; j < 2 * size; j++) { -- cgit v1.3.1 From a1ae5b20ccf760282538dd81b9290527757fa9c7 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 11 Nov 2025 10:27:47 +0700 Subject: update doc --- .github/workflows/static_analysis.yml | 9 +- README.rst | 56 ++++++-- docs/_static/custom.css | 3 + docs/conf.py | 8 +- docs/contributing/code_of_conduct.rst | 1 - docs/contributing/index.rst | 22 --- docs/contributing/porting.rst | 243 ---------------------------------- docs/faq.rst | 32 +---- docs/getting_started.rst | 159 ++++++++++++---------- docs/index.rst | 37 +----- docs/info/changelog.rst | 48 +++++++ docs/info/code_of_conduct.rst | 1 + docs/info/index.rst | 1 + docs/integration.rst | 93 +++++++++++++ docs/porting.rst | 243 ++++++++++++++++++++++++++++++++++ docs/reference/architecture.rst | 39 ++---- docs/reference/boards.rst | 31 +++-- docs/reference/dependencies.rst | 12 +- docs/reference/glossary.rst | 2 +- docs/troubleshooting.rst | 43 ++++-- hw/bsp/family_support.cmake | 49 +++++-- tools/gen_doc.py | 2 +- 22 files changed, 640 insertions(+), 494 deletions(-) create mode 100644 docs/_static/custom.css delete mode 100644 docs/contributing/code_of_conduct.rst delete mode 100644 docs/contributing/index.rst delete mode 100644 docs/contributing/porting.rst create mode 100644 docs/info/code_of_conduct.rst create mode 100644 docs/integration.rst create mode 100644 docs/porting.rst diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index a89cdc279..4db267517 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -90,7 +90,8 @@ jobs: path: ${{ steps.analyze.outputs.sarif-output }} PVS-Studio: - if: github.repository_owner == 'hathach' + # Only run on non-forked PR since secrets token is required + if: github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false runs-on: ubuntu-latest strategy: fail-fast: false @@ -141,7 +142,8 @@ jobs: path: pvs-studio-${{ matrix.board }}.sarif SonarQube: - if: github.repository_owner == 'hathach' + # Only run on non-forked PR since secrets token is required + if: github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false runs-on: ubuntu-latest env: BUILD_WRAPPER_OUT_DIR: build_wrapper_output_directory @@ -184,7 +186,8 @@ jobs: --define sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json IAR-CStat: - #if: github.repository_owner == 'hathach' + # Only run on non-forked PR since secrets token is required + #if: github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false if: false runs-on: ubuntu-latest strategy: diff --git a/README.rst b/README.rst index 2d84a2f6c..d0586f55a 100644 --- a/README.rst +++ b/README.rst @@ -1,26 +1,55 @@ +TinyUSB +======= + |Build Status| |CircleCI Status| |Documentation Status| |Static Analysis| |Fuzzing Status| |License| Sponsors -======== +-------- TinyUSB is funded by: Adafruit. Purchasing products from them helps to support this project. .. figure:: docs/assets/adafruit_logo.svg :alt: Adafruit Logo + :align: left :target: https://www.adafruit.com -TinyUSB Project -=============== +.. raw:: html + +
+ +Overview +-------- .. figure:: docs/assets/logo.svg :alt: TinyUSB + :align: left + +.. raw:: html + +
+ +TinyUSB is an open-source cross-platform USB Host/Device stack for embedded systems. It’s designed for memory safety +(no dynamic allocation) and thread safety (all interrupts deferred to non-ISR task functions). The stack emphasizes portability, +small footprint, and real-time performance across 50+ MCU families. -TinyUSB is an open-source cross-platform USB Host/Device stack for embedded system, designed to be memory-safe with no dynamic allocation and thread-safe with all interrupt events are deferred then handled in the non-ISR task function. Check out the online `documentation `__ for more details. +Key Features +------------ + +* **Thread-safe:** USB interrupts deferred to task context +* **Memory-safe:** No dynamic allocation, all buffers static +* **Portable:** Supports 50+ MCU families +* **Comprehensive:** Includes CDC, HID, MSC, Audio, and Host support +* **RTOS-friendly:** Works with bare metal, FreeRTOS, RT-Thread, and Mynewt .. figure:: docs/assets/stack.svg :width: 500px + :align: left :alt: stackup +.. raw:: html + +
+ :: . @@ -36,7 +65,7 @@ TinyUSB is an open-source cross-platform USB Host/Device stack for embedded syst Getting started -=============== +--------------- See the `online documentation `_ for information about using TinyUSB and how it is implemented. @@ -49,7 +78,7 @@ For bugs and feature requests, please `raise an issue `_ Host Stack -========== +---------- - Human Interface Device (HID): Keyboard, Mouse, Generic - Mass Storage Class (MSC) @@ -81,14 +110,14 @@ Host Stack Similar to the Device Stack, if you have a special requirement, ``usbh_app_driver_get_cb()`` can be used to write your own class driver without modifying the stack. Power Delivery Stack -==================== +-------------------- - Power Delivery 3.0 (PD3.0) with USB Type-C support (WIP) - Super early stage, only for testing purpose - Only support STM32 G4 OS Abstraction layer -==================== +-------------------- TinyUSB is completely thread-safe by pushing all Interrupt Service Request (ISR) events into a central queue, then processing them later in the non-ISR context task function. It also uses semaphore/mutex to access shared resources such as Communication Device Class (CDC) FIFO. Therefore the stack needs to use some of the OS's basic APIs. Following OSes are already supported out of the box. @@ -98,7 +127,7 @@ TinyUSB is completely thread-safe by pushing all Interrupt Service Request (ISR) - **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its `own repo `_ Supported CPUs -============== +-------------- +--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ | Manufacturer | Family | Device | Host | Highspeed | Driver | Note | @@ -234,7 +263,7 @@ Supported CPUs +--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ Table Legend ------------- +^^^^^^^^^^^^ ========= ========================= ✔ Supported @@ -244,7 +273,7 @@ Table Legend ========= ========================= Development Tools -================= +----------------- The following tools are provided freely to support the development of the TinyUSB project: @@ -273,6 +302,5 @@ The following tools are provided freely to support the development of the TinyUS .. _Supported Boards: docs/reference/boards.rst .. _Dependencies: docs/reference/dependencies.rst .. _Concurrency: docs/reference/concurrency.rst -.. _Contributing: docs/contributing/index.rst .. _Code of Conduct: CODE_OF_CONDUCT.rst -.. _Porting: docs/contributing/porting.rst +.. _Porting: docs/porting.rst diff --git a/docs/_static/custom.css b/docs/_static/custom.css new file mode 100644 index 000000000..d64d26047 --- /dev/null +++ b/docs/_static/custom.css @@ -0,0 +1,3 @@ +.clear-both { + clear: both; +} diff --git a/docs/conf.py b/docs/conf.py index 4249d41f7..cd0338413 100755 --- a/docs/conf.py +++ b/docs/conf.py @@ -14,7 +14,7 @@ from pathlib import Path # -- Project information ----------------------------------------------------- project = 'TinyUSB' -copyright = '2024, Ha Thach' +copyright = '2025, Ha Thach' author = 'Ha Thach' @@ -41,6 +41,8 @@ html_favicon = 'assets/logo.svg' html_theme_options = { 'sidebar_hide_name': True, } +html_static_path = ['_static'] +html_css_files = ['custom.css'] todo_include_todos = True @@ -52,7 +54,9 @@ def preprocess_readme(): if src.exists(): content = src.read_text() content = re.sub(r"docs/", r"", content) - content = re.sub(r".rst", r".html", content) + content = re.sub(r"\.rst\b", r".html", content) + if not content.endswith("\n"): + content += "\n" tgt.write_text(content) preprocess_readme() diff --git a/docs/contributing/code_of_conduct.rst b/docs/contributing/code_of_conduct.rst deleted file mode 100644 index fb1859c75..000000000 --- a/docs/contributing/code_of_conduct.rst +++ /dev/null @@ -1 +0,0 @@ -.. include:: ../../CODE_OF_CONDUCT.rst \ No newline at end of file diff --git a/docs/contributing/index.rst b/docs/contributing/index.rst deleted file mode 100644 index 78933a3ca..000000000 --- a/docs/contributing/index.rst +++ /dev/null @@ -1,22 +0,0 @@ -************ -Contributing -************ - -Contributing can be highly rewarding, but it can also be frustrating at times. -It takes time to review patches, and as this is an open source project, that -sometimes can take a while. The reviewing process depends on the availability -of the maintainers, who may not be always available. Please try to be -understanding through the process. - -There a few guidelines you need to keep in mind when contributing. Please have -a look at them as that will make the contribution process easier for all -parties. - -Index -===== - -.. toctree:: - :maxdepth: 2 - - code_of_conduct - porting diff --git a/docs/contributing/porting.rst b/docs/contributing/porting.rst deleted file mode 100644 index c3076354c..000000000 --- a/docs/contributing/porting.rst +++ /dev/null @@ -1,243 +0,0 @@ - -******* -Porting -******* - -TinyUSB is designed to be a universal USB protocol stack for microcontrollers. It -handles most of the high level USB protocol and relies on the microcontroller's USB peripheral for -data transactions on different endpoints. Porting is the process of adding low-level support for -the rest of the common stack. Once the low-level is implemented, it is very easy to add USB support -for the microcontroller to other projects, especially those already using TinyUSB such as CircuitPython. - -Below are instructions on how to get the cdc_msc device example running on a new microcontroller. Doing so includes adding the common code necessary for other uses while minimizing other extra code. Whenever you see a phrase or word in ``<>`` it should be replaced. - -Register defs -------------- - -The first step to adding support is including the register definitions and startup code for the -microcontroller in TinyUSB. We write the TinyUSB implementation against these structs instead of higher level functions to keep the code small and to prevent function name collisions in linking of larger projects. For ARM microcontrollers this is the CMSIS definitions. They should be -placed in the ``hw/mcu//`` directory. - -Once this is done, create a directory in ``hw/bsp/`` for the specific board you are using to test the code (duplicating an existing board's directory is the best way to get started). The board should be a readily available development board so that others can also test. - -Build ------ - -Now that those directories are in place, we can start our iteration process to get the example building successfully. To build, run from the root of TinyUSB: - -.. code-block:: bash - - make -C examples/device/cdc_msc BOARD= - -Unless you've read ahead, this will fail miserably. Now, lets get it to fail less by updating the files in the board directory. The code in the board's directory is responsible for setting up the microcontroller's clocks and pins so that USB works. TinyUSB itself only operates on the USB peripheral. The board directory also includes information what files are needed to build the example. - -One of the first things to change is the ``-DCFG_TUSB_MCU`` C flag in the ``board.mk`` file. This is used to tell TinyUSB what platform is being built. So, add an entry to ``src/tusb_option.h`` and update the ``CFLAGS`` to match. - -Update ``board.mk``'s VENDOR and CHIP_FAMILY values when creating the directory for the struct files. Duplicate one of the other sources from ``src/portable`` into ``src/portable//`` and delete all of the implementation internals. We'll cover what everything there does later. For now, get it compiling. - -Implementation --------------- - -At this point you should get an error due to an implementation issue and hopefully the build is setup for the new MCU. You will still need to modify the ``board.mk`` to include specific ``CFLAGS``, the linker script, linker flags, source files, include directories. All file paths are relative to the top of the TinyUSB repo. - -Board Support (BSP) -^^^^^^^^^^^^^^^^^^^ - -The board support code is only used for self-contained examples and testing. It is not used when TinyUSB is part of a larger project. Its responsible for getting the MCU started and the USB peripheral clocked. It also optionally provides LED definitions that are used to blink an LED to show that the code is running. - -It is located in ``hw/bsp//board_.c``. - -``board_init()`` -~~~~~~~~~~~~~~~~ - -``board_init()`` is responsible for starting the MCU, setting up the USB clock and USB pins. It is also responsible for initializing LED pins. - -One useful clock debugging technique is to set up a PWM output at a known value such as 500hz based on the USB clock so that you can verify it is correct with a logic probe or oscilloscope. - -Setup your USB in a crystal-less mode when available. That makes the code easier to port across boards. - -``board_led_write()`` -~~~~~~~~~~~~~~~~~~~~~ - -Feel free to skip this until you want to verify your demo code is running. To implement, set the pin corresponding to the led to output a value that lights the LED when ``state`` is true. - -OS Abstraction Layer (OSAL) -^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -The OS Abstraction Layer is responsible for providing basic data structures for TinyUSB that may allow for concurrency when used with an RTOS. Without an RTOS it simply handles concurrency issues between the main code and interrupts. The code is almost entirely agnostic of MCU and lives in ``src/osal``. - -In RTOS configurations, ``tud_task()``/``tuh_task()`` blocks behind a synchronization structure when the event queue is empty, so that the scheduler may give the CPU to a different task. To take advantage of the library's capability to yield the CPU when there are no actionable USB device events, ensure that the ``CFG_TUSB_OS`` symbol is defined, e.g ``OPT_OS_FREERTOS`` enables the FreeRTOS scheduler to schedule other threads than that which calls ``tud_task()``/``tuh_task()``. - -Device API -^^^^^^^^^^ - -After the USB device is setup, the USB device code works by processing events on the main thread (by calling ``tud_task()``). These events are queued by the USB interrupt handler. So, there are three parts to the device low-level API: device setup, endpoint setup and interrupt processing. - -All of the code for the low-level device API is in ``src/portable///dcd_.c``. - -Device Setup -~~~~~~~~~~~~ - -``dcd_init()`` -"""""""""""""" - -Initializes the USB peripheral for device mode and enables it. -This function should enable internal D+/D- pull-up for enumeration. - -``dcd_int_enable()`` / ``dcd_int_disable()`` -"""""""""""""""""""""""""""""""""""""""""""" - -Enables or disables the USB device interrupt(s). May be used to prevent concurrency issues when mutating data structures shared between main code and the interrupt handler. - -``dcd_int_handler()`` -""""""""""""""""""""" - -Processes all the hardware generated events e.g Bus reset, new data packet from host etc ... It will be called by application in the MCU USB interrupt handler. - -``dcd_set_address()`` -""""""""""""""""""""" - -Called when the device is given a new bus address. - -If your peripheral automatically changes address during enumeration (like the nrf52) you may leave this empty and also no queue an event for the corresponding SETUP packet. - -``dcd_remote_wakeup()`` -""""""""""""""""""""""" - -Called to remote wake up host when suspended (e.g hid keyboard) - -``dcd_connect()`` / ``dcd_disconnect()`` -"""""""""""""""""""""""""""""""""""""""" - -Connect or disconnect the data-line pull-up resistor. Define only if MCU has an internal pull-up. (BSP may define for MCU without internal pull-up.) - -Special events -~~~~~~~~~~~~~~ - -You must let TinyUSB know when certain events occur so that it can continue its work. There are a few methods you can call to queue events for TinyUSB to process. - -``dcd_event_bus_signal()`` -"""""""""""""""""""""""""" - -There are a number of events that your peripheral may communicate about the state of the bus. Here is an overview of what they are. Events in **BOLD** must be provided for TinyUSB to work. - - -* **DCD_EVENT_RESET** - Triggered when the host resets the bus causing the peripheral to reset. Do any other internal reset you need from the interrupt handler such as resetting the control endpoint. -* DCD_EVENT_SOF - Signals the start of a new USB frame. - -Calls to this look like: - -.. code-block:: c - - dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true); - - -The first ``0`` is the USB peripheral number. Statically saying ``0`` is common for single USB device MCUs. - -The ``true`` indicates the call is from an interrupt handler and will always be the case when porting in this way. - -``dcd_setup_received()`` -"""""""""""""""""""""""" - -SETUP packets are a special type of transaction that can occur at any time on the control endpoint, numbered ``0``. Since they are unique, most peripherals have special handling for them. Their data is always 8 bytes in length as well. - -Calls to this look like: - -.. code-block:: c - - dcd_event_setup_received(0, setup, true); - - -As before with ``dcd_event_bus_signal()`` the first argument is the USB peripheral number and the third is true to signal its being called from an interrupt handler. The middle argument is byte array of length 8 with the contents of the SETUP packet. It can be stack allocated because it is copied into the queue. - -Endpoints -~~~~~~~~~ - -Endpoints are the core of the USB data transfer process. They come in a few forms such as control, isochronous, bulk, and interrupt. We won't cover the details here except with some caveats in open below. In general, data is transferred by setting up a buffer of a given length to be transferred on a given endpoint address and then waiting for an interrupt to signal that the transfer is finished. Further details below. - -Endpoints within USB have an address which encodes both the number and direction of an endpoint. TinyUSB provides ``tu_edpt_number()`` and ``tu_edpt_dir()`` to unpack this data from the address. Here is a snippet that does it. - -.. code-block:: c - - uint8_t epnum = tu_edpt_number(ep_addr); - uint8_t dir = tu_edpt_dir(ep_addr); - - -``dcd_edpt_open()`` -""""""""""""""""""" - -Opening an endpoint is done for all non-control endpoints once the host picks a configuration that the device should use. At this point, the endpoint should be enabled in the peripheral and configured to match the endpoint descriptor. Pay special attention to the direction of the endpoint you can get from the helper methods above. It will likely change what registers you are setting. - -Also make sure to enable endpoint specific interrupts. - -``dcd_edpt_close()`` -"""""""""""""""""""" - -Close an endpoint. his function is used for implementing alternate settings. - -After calling this, the device should not respond to any packets directed towards this endpoint. When called, this function must abort any transfers in progress through this endpoint, before returning. - -Implementation is optional. Must be called from the USB task. Interrupts could be disabled or enabled during the call. - -``dcd_edpt_xfer()`` -""""""""""""""""""" - -``dcd_edpt_xfer()`` is responsible for configuring the peripheral to send or receive data from the host. "xfer" is short for "transfer". **This is one of the core methods you must implement for TinyUSB to work (one other is the interrupt handler).** Data from the host is the OUT direction and data to the host is IN. It is used for all endpoints including the control endpoint 0. Make sure to handle the zero-length packet STATUS packet on endpoint 0 correctly. It may be a special transaction to the peripheral. - -Besides that, all other transactions are relatively straight-forward. The endpoint address provides the endpoint -number and direction which usually determines where to write the buffer info. The buffer and its length are usually -written to a specific location in memory and the peripheral is told the data is valid. (Maybe by writing a 1 to a -register or setting a counter register to 0 for OUT or length for IN.) - -The transmit buffer alignment is determined by ``CFG_TUSB_MEM_ALIGN``. - -One potential pitfall is that the buffer may be longer than the maximum endpoint size of one USB -packet. Some peripherals can handle transmitting multiple USB packets for a provided buffer (like the SAMD21). -Others (like the nRF52) may need each USB packet queued individually. To make this work you'll need to track -some state for yourself and queue up an intermediate USB packet from the interrupt handler. - -Once the transaction is going, the interrupt handler will notify TinyUSB of transfer completion. -During transmission, the IN data buffer is guaranteed to remain unchanged in memory until the ``dcd_xfer_complete()`` function is called. - -The ``dcd_edpt_xfer()`` function must never add zero-length-packets (ZLP) on its own to a transfer. If a ZLP is required, -then it must be explicitly sent by the stack calling ``dcd_edpt_xfer()``, by calling ``dcd_edpt_xfer()`` a second time with len=0. -For control transfers, this is automatically done in ``usbd_control.c``. - -At the moment, only a single buffer can be transmitted at once. There is no provision for double-buffering. new ``dcd_edpt_xfer()`` will not -be called again on the same endpoint address until the driver calls ``dcd_xfer_complete()`` (except in cases of USB resets). - -``dcd_xfer_complete()`` -""""""""""""""""""""""" - -Once a transfer completes you must call ``dcd_xfer_complete()`` from the USB interrupt handler to let TinyUSB know that a transaction has completed. Here is a sample call: - -.. code-block:: c - - dcd_event_xfer_complete(0, ep_addr, xfer->actual_len, XFER_RESULT_SUCCESS, true); - - -The arguments are: - - -* the USB peripheral number -* the endpoint address -* the actual length of the transfer. (OUT transfers may be smaller than the buffer given in ``dcd_edpt_xfer()``) -* the result of the transfer. Failure isn't handled yet. -* ``true`` to note the call is from an interrupt handler. - -``dcd_edpt_stall()`` / ``dcd_edpt_clear_stall()`` -""""""""""""""""""""""""""""""""""""""""""""""""" - -Stalling is one way an endpoint can indicate failure such as when an unsupported command is transmitted. The pair of ``dcd_edpt_stall()``, ``dcd_edpt_clear_stall()`` help manage the stall state of all endpoints. - -Woohoo! -------- - -At this point you should have everything working! 🙂 Of course, you may not write perfect code. Here are some tips and tricks for debugging. - -Use `WireShark `_ or `a Beagle `_ to sniff the USB traffic. When things aren't working its likely very early in the USB enumeration process. Figuring out where can help clue in where the issue is. For example: - - -* If the host sends a SETUP packet and its not ACKed then your USB peripheral probably isn't started correctly. -* If the peripheral is started correctly but it still didn't work, then verify your usb clock is correct. (You did output a PWM based on it right? 🙂) -* If the SETUP packet is ACKed but nothing is sent back then you interrupt handler isn't queueing the setup packet correctly. (Also, if you are using your own code instead of an example ``tud_task()`` may not be called.) If that's OK, the ``dcd_xfer_complete()`` may not be setting up the next transaction correctly. diff --git a/docs/faq.rst b/docs/faq.rst index ade51a379..a5fe09495 100644 --- a/docs/faq.rst +++ b/docs/faq.rst @@ -7,7 +7,7 @@ General Questions **Q: What microcontrollers does TinyUSB support?** -TinyUSB supports 30+ MCU families including STM32, RP2040, NXP (iMXRT, Kinetis, LPC), Microchip SAM, Nordic nRF5x, ESP32, and many others. See :doc:`reference/boards` for the complete list. +TinyUSB supports 50+ MCU families including STM32, RP2040, NXP (iMXRT, Kinetis, LPC), Microchip SAM, Nordic nRF5x, ESP32, and many others. See :doc:`reference/boards` for the complete list. **Q: Can I use TinyUSB in commercial projects?** @@ -178,33 +178,3 @@ ESP32-S3 has specific USB implementation challenges: - Check power supply requirements for host mode - Some features may be limited compared to other MCUs - Use ESP32-S3 specific examples and documentation - -STM32CubeIDE Integration -======================== - -**Q: How do I integrate TinyUSB with STM32CubeIDE?** - -1. In STM32CubeMX, enable USB_OTG_FS/HS under Connectivity, set to "Device_Only" mode -2. Enable the USB global interrupt in NVIC Settings -3. Add ``tusb.h`` include and call ``tusb_init()`` in main.c -4. Call ``tud_task()`` in your main loop -5. In the generated ``stm32xxx_it.c``, modify the USB IRQ handler to call ``tud_int_handler(0)`` -6. Create ``tusb_config.h`` and ``usb_descriptors.c`` files - -**Q: STM32CubeIDE generated code conflicts with TinyUSB** - -Don't use STM32's built-in USB middleware (USB Device Library) when using TinyUSB. Disable USB code generation in STM32CubeMX and let TinyUSB handle all USB functionality. - -**Q: STM32 USB interrupt handler setup** - -Replace the generated USB interrupt handler with a call to TinyUSB: - -.. code-block:: c - - void OTG_FS_IRQHandler(void) { - tud_int_handler(0); - } - -**Q: Which STM32 families work best with TinyUSB?** - -STM32F4, F7, and H7 families have the most mature TinyUSB support. STM32F0, F1, F3, L4 families are also supported but may have more limitations. Check the supported boards list for your specific variant. \ No newline at end of file diff --git a/docs/getting_started.rst b/docs/getting_started.rst index 32c80b91c..0c3fcec80 100644 --- a/docs/getting_started.rst +++ b/docs/getting_started.rst @@ -2,14 +2,39 @@ Getting Started *************** -This guide will get you up and running with TinyUSB quickly. We'll start with working examples, then show you how to integrate TinyUSB into your own projects. +This guide will get you up and running with TinyUSB quickly with working examples. + +Project Structure +==================== + +TinyUSB separates example applications from board-specific hardware configurations: + +* **Example applications**: Located in `examples/ `_ directories +* **Board Support Packages (BSP)**: Located in ``hw/bsp/FAMILY/boards/BOARD_NAME/`` with hardware abstraction including pin mappings, clock settings, and linker scripts +* **Build system**: Located in `examples/build_system/ `_ which supports both Make and CMake. Though some MCU families such as espressif or rp2040 only support cmake + +For example, stm32h743eval is located in `hw/bsp/stm32h7/boards/stm32h743eval `_ where ``FAMILY=stm32h7`` and ``BOARD=stm32h743eval``. When you build with ``BOARD=stm32h743eval``, the build system automatically finds the corresponding BSP using the FAMILY. + +For guidance on integrating TinyUSB into your own firmware (configuration, descriptors, initialization, and callback workflow), see :doc:`integration`. Quick Start Examples ==================== The fastest way to understand TinyUSB is to see it working. These examples demonstrate core functionality and can be built immediately. -We'll assume you are using the stm32f407disco board. For other boards, see ``Board Support Packages`` below. +We'll assume you are using the **STM32H743 Eval board** (BOARD=stm32h743eval) under the **stm32h7** family. For other boards, see ``Board Support Packages`` below. + +Get the Code +------------ + +.. code-block:: bash + + $ git clone https://github.com/hathach/tinyusb tinyusb + $ cd tinyusb + $ python tools/get_deps.py -b stm32h743eval # or python tools/get_deps.py stm32h7 + +.. note:: + For rp2040 `pico-sdk `_ or `esp-idf `_ for Espressif targets are required; install them per vendor instructions. Simple Device Example --------------------- @@ -17,20 +42,33 @@ Simple Device Example The `cdc_msc `_ example creates a USB device with both a virtual serial port (CDC) and mass storage (MSC). **What it does:** + * Appears as a serial port that echoes back any text you send * Appears as a small USB drive with a README.TXT file * Blinks an LED to show activity -**Build and run:** +**Build and run with CMake:** + +.. code-block:: bash + + $ cd examples/device/cdc_msc + $ cmake -DBOARD=stm32h743eval -B build # add "-G Ninja" to use Ninja build + $ cmake --build build + # cmake --build build --target cdc_msc-jlink + +.. tip:: + Flashed/Debugger can be selected with --target ``-jlink``, ``-stlink`` or ``-openocd`` depending on your board. Use ``--target help`` to list all supported targets. + +**Build and run with Make:** .. code-block:: bash - $ git clone https://github.com/hathach/tinyusb tinyusb - $ cd tinyusb - $ python tools/get_deps.py stm32f4 # download dependencies, note ESP and RP2 need their SDKs, too $ cd examples/device/cdc_msc - $ cmake -DBOARD=stm32f407disco -B build # add "-G Ninja ." on Windows - $ cmake --build build # add "--target cdc_msc-jlink" for flashing using J-Link, "--target help" to list targets + $ make BOARD=stm32h743eval all + $ make BOARD=stm32h743eval flash-jlink + +.. tip:: + Flashed/Debugger can be selected with target ``flash-jlink``, ``flash-stlink`` or ``flash-openocd`` depending on your board. Connect the device to your computer and you'll see both a new serial port and a small USB drive appear. @@ -40,113 +78,91 @@ Simple Host Example The `cdc_msc_hid `_ example creates a USB host that can connect to USB devices with CDC, MSC, or HID interfaces. **What it does:** + * Detects and enumerates connected USB devices * Communicates with CDC devices (like USB-to-serial adapters) * Reads from MSC devices (like USB drives) * Receives input from HID devices (like keyboards and mice) -**Build and run:** +**Build and run with CMake:** .. code-block:: bash - $ # initial setup see previous example $ cd examples/host/cdc_msc_hid - $ cmake -DBOARD=stm32f407disco -B build # add "-G Ninja ." on Windows - $ cmake --build build # add "--target cdc_msc_hid-jlink" for flashing using J-Link, "--target help" to list targets - -Connect USB devices to see enumeration messages and device-specific interactions in the serial output. - -Project Structure ------------------ - -TinyUSB separates example applications from board-specific hardware configurations: - -* **Example applications**: Located in `examples/device/ `_, `examples/host/ `_, and `examples/dual/ `_ directories -* **Board Support Packages (BSP)**: Located in ``hw/bsp/FAMILY/boards/BOARD_NAME/`` with hardware abstraction including pin mappings, clock settings, and linker scripts - -For example, raspberry_pi_pico is located in `hw/bsp/rp2040/boards/raspberry_pi_pico `_ where ``FAMILY=rp2040`` and ``BOARD=raspberry_pi_pico``. When you build with ``BOARD=raspberry_pi_pico``, the build system automatically finds the corresponding BSP using the FAMILY. - -Add TinyUSB to Your Project -============================ + $ cmake -DBOARD=stm32h743eval -B build + $ cmake --build build -Once you've seen TinyUSB working, here's how to integrate it into your own project: +**Build and run with Make:** -Integration Steps ------------------ +.. code-block:: bash -1. **Get TinyUSB**: Copy this repository or add it as a git submodule to your project at ``your_project/tinyusb`` + $ cd examples/host/cdc_msc_hid + $ make BOARD=stm32h743eval all + $ make BOARD=stm32h743eval flash-jlink -2. **Add source files**: Add all ``.c`` files from ``tinyusb/src/`` to your project +Connect USB devices to see enumeration messages and device-specific interactions in the serial output. -3. **Configure include paths**: Add ``your_project/tinyusb/src`` to your include path. Ensure your include path contains ``tusb_config.h`` +Additional Build Options +------------------------ -4. **Configure TinyUSB**: Create ``tusb_config.h`` with required macros like ``CFG_TUSB_MCU`` and ``CFG_TUSB_OS``. Copy from ``examples/device/*/tusb_config.h`` as a starting point +Debug and Logging +^^^^^^^^^^^^^^^^^ -5. **Implement USB descriptors**: For device stack, implement all ``tud_descriptor_*_cb()`` callbacks +TinyUSB built-in logging can be enabled by setting `CFG_TUSB_DEBUG` which is done by passing ``LOG=level``. The higher the level, the more verbose the logging. -6. **Initialize TinyUSB**: Add ``tusb_init()`` to your initialization code +In addition to traditional hw uart as default, logging with debugger such as `Segger RTT `_ (10x faster) is also supported with `LOGGER=rtt` option. -7. **Handle interrupts**: Call ``tusb_int_handler()`` from your USB IRQ handler +.. code-block:: bash -8. **Run USB tasks**: Call ``tud_task()`` (device) or ``tuh_task()`` (host) periodically in your main loop + $ cmake -B build -DBOARD=stm32h743eval -DLOG=2 # logging level 2 with uart + $ cmake -B build -DBOARD=stm32h743eval -DLOG=2 -DLOGGER=rtt # logging level 2 with RTT -9. **Implement class callbacks**: Implement callbacks for enabled USB classes +.. code-block:: bash -Simple Integration Example --------------------------- + $ make BOARD=stm32h743eval LOG=2 all # logging level 2 with uart + $ make BOARD=stm32h743eval LOG=2 LOGGER=rtt all # logging level 2 with RTT -.. code-block:: c +RootHub Port Selection +^^^^^^^^^^^^^^^^^^^^^^ - #include "tusb.h" +Some boards support multiple usb controllers (roothub ports), by default one rh port is used as device, another as host in ``board.mk/board.cmake``. This can be overridden with option ``RHPORT_DEVICE=n`` or ``RHPORT_HOST=n`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: - int main(void) { - board_init(); // Your board initialization +.. code-block:: bash - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; - // tud_descriptor_* callbacks omitted here - tusb_init(0, &dev_init); + $ cmake -B build -DBOARD=stm32h743eval -DRHPORT_DEVICE=1 # select roothub port 1 as device - while(1) { - tud_task(); // TinyUSB device task - your_application(); // Your application code - } - } +.. code-block:: bash - void USB_IRQHandler(void) { - tusb_int_handler(0, true); - } + $ make BOARD=stm32h743eval RHPORT_DEVICE=1 all # select roothub port 1 as device -.. note:: - Unlike many libraries, TinyUSB callbacks don't need to be explicitly registered. The stack automatically calls functions with specific names (e.g., ``tud_cdc_rx_cb()``) when events occur. Simply implement the callbacks you need. +RootHub Port Speed +^^^^^^^^^^^^^^^^^^ -.. note:: - TinyUSB uses consistent naming prefixes: ``tud_`` for device stack functions and ``tuh_`` for host stack functions. See the :doc:`reference/glossary` for more details. +A MCU can support multiple operational speed. By default, the example build system will use the fastest supported on the board. Use option ``RHPORT_DEVICE_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` or ``RHPORT_HOST_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` e.g To force operating speed -Development Tips -================ +.. code-block:: bash -**Debug builds and logging:** + $ cmake -B build -DBOARD=stm32h743eval -DRHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED .. code-block:: bash - $ cmake -DBOARD=stm32f407disco -DDEBUG=1 ... # Debug build - $ cmake -DBOARD=stm32f407disco -DLOG=2 ... # Enable detailed logging + $ make BOARD=stm32h743eval RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED all + -**IAR Embedded Workbench:** +IAR Embedded Workbench +---------------------- For IAR users, project connection files are available. Import `tools/iar_template.ipcf `_ or use native CMake support (IAR 9.50.1+). See `tools/iar_gen.py `_ for automated project generation. + Common Issues and Solutions -=========================== +--------------------------- **Build Errors** * **"arm-none-eabi-gcc: command not found"**: Install ARM GCC toolchain: ``sudo apt-get install gcc-arm-none-eabi`` * **"Board 'X' not found"**: Check the available boards in ``hw/bsp/FAMILY/boards/`` or run ``python tools/build.py -l`` -* **Missing dependencies**: Run ``python tools/get_deps.py FAMILY`` where FAMILY matches your board +* **Missing dependencies**: Run ``python tools/get_deps.py FAMILY`` where FAMILY matches your board or ``python tools/get_deps.py -b BOARD`` **Runtime Issues** @@ -166,6 +182,7 @@ Some examples require udev permissions to access USB devices: Next Steps ========== +* Check :doc:`integration` for integrating TinyUSB into your own firmware * Check :doc:`reference/boards` for board-specific information * Explore more examples in `examples/device/ `_ and `examples/host/ `_ directories * Read :doc:`reference/usb_concepts` to understand USB fundamentals diff --git a/docs/index.rst b/docs/index.rst index ac10dbfd7..39d30a038 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -1,45 +1,21 @@ -TinyUSB Documentation -===================== - -TinyUSB is an open-source cross-platform USB Host/Device stack for embedded systems, designed to be memory-safe with no dynamic allocation and thread-safe with all interrupt events deferred to non-ISR task functions. - -For Developers --------------- - -TinyUSB provides a complete USB stack implementation supporting both device and host modes across a wide range of microcontrollers. The stack is designed for resource-constrained embedded systems with emphasis on code size, memory efficiency, and real-time performance. - -**Key Features:** - -* **Thread-safe design**: All USB interrupts are deferred to task context -* **Memory-safe**: No dynamic allocation, all buffers are statically allocated -* **Portable**: Supports 30+ MCU families from major vendors -* **Comprehensive**: Device classes (CDC, HID, MSC, Audio, etc.) and Host stack -* **RTOS support**: Works with bare metal, FreeRTOS, RT-Thread, and Mynewt - -**Quick Navigation:** - -* New to TinyUSB? Start with :doc:`getting_started` and :doc:`reference/glossary` -* Want to understand the design? Read :doc:`reference/architecture` and :doc:`reference/usb_concepts` -* Having issues? Check :doc:`faq` and :doc:`troubleshooting` - -Documentation Structure ------------------------ +.. include:: ../README_processed.rst .. toctree:: :maxdepth: 2 :caption: Information getting_started + integration + porting + reference/index faq troubleshooting - reference/index .. toctree:: :maxdepth: 1 :caption: Project Info info/index - contributing/index .. toctree:: :caption: External Links @@ -48,8 +24,3 @@ Documentation Structure Source Code Issue Tracker Discussions - -GitHub Project Main README -========================== - -.. include:: ../README_processed.rst diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index b4423f81e..d6bf846ed 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -20,6 +20,7 @@ API Changes ----------- - Core APIs + - Add weak callbacks with new syntax for better compiler compatibility - Add ``tusb_deinit()`` to cleanup stack - Add time functions: ``tusb_time_millis_api()`` and ``tusb_time_delay_ms_api()`` @@ -27,6 +28,7 @@ API Changes - Introduce ``xfer_isr()`` callback for ISO transfer optimization in device classes - Device APIs + - CDC: Add notification support ``tud_cdc_configure()``, ``tud_cdc_n_notify_uart_state()``, ``tud_cdc_n_notify_conn_speed_change()``, ``tud_cdc_notify_complete_cb()`` - MSC: Add ``tud_msc_inquiry2_cb()`` with bufsize parameter, update ``tud_msc_async_io_done()`` @@ -36,6 +38,7 @@ API Changes ``tud_mtp_response_send()``, ``tud_mtp_event_send()`` - Host APIs + - Core: Add ``tuh_edpt_close()``, ``tuh_address_set()``, ``tuh_descriptor_get_device_local()``, ``tuh_descriptor_get_string_langid()``, ``tuh_connected()``, ``tuh_bus_info_get()`` - Add enumeration callbacks: ``tuh_enum_descriptor_device_cb()``, @@ -50,6 +53,7 @@ Controller Driver (DCD & HCD) ----------------------------- - DWC2 + - Support DWC2 v4.30a with improved reset procedure - Fix core reset: wait for AHB idle before reset - Add STM32 DWC2 data cache support with proper alignment @@ -64,6 +68,7 @@ Controller Driver (DCD & HCD) - Refactor bitfields for better code generation - FSDEV (STM32) + - Fix AT32 compile issues after single-buffered endpoint changes - Add configurable single-buffered isochronous endpoints - Fix STM32H7 recurrent suspend ISR @@ -72,35 +77,42 @@ Controller Driver (DCD & HCD) - Improve PMA size handling for STM32U0 - EHCI + - Fix removed QHD getting reused - Fix NXP USBPHY disconnection detection - Chipidea/NXP + - Fix race condition with spinlock - Improve iMXRT support: fix build, disable BOARD_ConfigMPU, fix attach debouncing on port1 highspeed - Fix iMXRT1064 and add to HIL test pool - MAX3421E + - Use spinlock for thread safety instead of atomic flag - Implement ``hcd_edpt_close()`` - RP2040 + - Fix audio ISO transfer: reset state before notifying stack - Fix CMake RTOS cache variable - Abort transfer if active in ``iso_activate()`` - SAMD + - Add host controller driver support Device Stack ------------ - USBD Core + - Introduce ``xfer_isr()`` callback for interrupt-time transfer handling - Add ``usbd_edpt_xfer_fifo()`` stub - Revert endpoint busy/claim status if ``xfer_isr()`` defers to ``xfer_cb()`` - Audio + - Major simplification of UAC driver and alt settings management - Move ISO transfers into ``xfer_isr()`` for better performance - Remove FIFO mutex (single producer/consumer optimization) @@ -109,25 +121,30 @@ Device Stack - Update buffer macros with cache line size alignment - CDC + - Add notification support: ``CFG_TUD_CDC_NOTIFY``, ``tud_cdc_n_notify_conn_speed_change()``, ``tud_cdc_notify_complete_cb()`` - Reduce default bInterval from 16ms to 1ms for better responsiveness - Rename ``tud_cdc_configure_fifo()`` to ``tud_cdc_configure()`` and add ``tx_overwritable_if_not_connected`` option - Fix web serial robustness with major overhaul and logic cleanup - HID + - Add Usage Page and Table for Power Devices (0x84 - 0x85) - Fix HID descriptor parser variable size and 4-byte item handling - Add consumer page configurations - MIDI + - Fix MIDI interface descriptor handling after audio streaming interface - Skip RX data with all zeroes - MSC + - Add async I/O support for MSC using ``tud_msc_async_io_done()`` - Add ``tud_msc_inquiry2_cb()`` with bufsize for full inquiry response - MTP + - Add new Media Transfer Protocol (MTP) device class driver - Support MTP operations: GetDeviceInfo, SendObjectInfo, SendObject - Add MTP event support with ``tud_mtp_event_send()`` @@ -135,13 +152,16 @@ Device Stack - Add hardware-in-the-loop testing support - NCM + - Add USB NCM link state control support - Fix DHCP offer/ACK destination - USBTMC + - Add vendor-specific message support - Vendor + - Fix vendor device reset and open issues - Fix descriptor parsing for ``CFG_TUD_VENDOR > 1`` - Fix vendor FIFO argument calculation @@ -150,6 +170,7 @@ Host Stack ---------- - USBH Core + - Major enumeration improvements: - Fix enumeration racing conditions - Add proper attach debouncing with hub/rootport handling (200ms delay) @@ -173,6 +194,7 @@ Host Stack - Force removed devices in same bus info before setting address - CDC Serial Host + - Major refactor to generalize CDC serial drivers (FTDI, CP210x, CH34x, PL2303, ACM) - Add explicit ``sync()`` API with ``TU_API_SYNC()`` returning ``tusb_xfer_result_t`` - Rename ``tuh_cdc_get_local_line_coding()`` to ``tuh_cdc_get_line_coding_local()`` @@ -180,6 +202,7 @@ Host Stack - Implement ``tuh_cdc_get/set_dtr/rts()`` as inline functions - MIDI Host + - Major API changes: - Rename ``tuh_midi_stream_flush()`` to ``tuh_midi_write_flush()`` - Add ``tuh_midi_packet_read_n()`` and ``tuh_midi_packet_write_n()`` @@ -189,9 +212,11 @@ Host Stack - Add ``tuh_midi_descriptor_cb()`` and ``tuh_midi_itf_get_info()`` - MSC Host + - Continue async I/O improvements - HID Host + - Fix version string to actually show version 0.18.0 @@ -226,6 +251,7 @@ Controller Driver (DCD & HCD) ----------------------------- - DWC2 + - Add DMA support for both device and host controller - Add host driver support including: full/high speed, control/bulk/interrupt (CBI) transfer, split CBI i.e FS/LS attached via highspeed hub, hub support @@ -695,6 +721,7 @@ Controller Driver (DCD & HCD) ----------------------------- - [DWC2] Generalize synopsys dwc2 with synopsys/dwc2 which support both FS and HS phy (UTMI and ULPI) for various MCUs. + - Broadcom 28/27xx on raspberrypi SBC - Silicon Labs EFM32 - Espressif ESP32 Sx @@ -916,6 +943,7 @@ HID - Add more hid keys constant from 0x6B to 0xA4 - [Breaking] rename API + - ``HID_PROTOCOL_NONE/KEYBOARD/MOUSE`` to ``HID_ITF_PROTOCOL_NONE/KEYBOARD/MOUSE`` - ``tud_hid_boot_mode()`` to ``tud_hid_get_protocol()`` - ``tud_hid_boot_mode_cb()`` to ``tud_hid_set_protocol_cb()`` @@ -925,6 +953,7 @@ MIDI - Fix MIDI buffer overflow issue - [Breaking] rename API + - Rename ``tud_midi_read()`` to ``tud_midi_stream_read()`` - Rename ``tud_midi_write()`` to ``tud_midi_stream_write()`` - Rename ``tud_midi_receive()`` to ``tud_midi_packet_read()`` @@ -1075,15 +1104,19 @@ Device Controller Driver - Use ``dcd_event_bus_reset()`` with link speed to replace bus_signal - ESP32-S2: + - Add bus suspend and wakeup support - SAMD21: + - Fix (walkaround) samd21 setup_packet overflow by USB DMA - STM32 Synopsys: + - Rework USB FIFO allocation scheme and allow RX FIFO size reduction - Sony CXD56 + - Update Update Spresense SDK to 2.0.2 - Fix dcd issues with setup packets - Correct EP number for cdc_msc example @@ -1100,19 +1133,24 @@ USB Device **Class Driver** - CDC + - Allow to transmit data, even if the host does not support control line states i.e set DTR - HID + - change default ``CFG_TUD_HID_EP_BUFSIZE`` from 16 to 64 - MIDI + - Fix midi sysex sending bug - MSC + - Invoke only scsi complete callback after status transaction is complete. - Fix ``scsi_mode_sense6_t`` padding, which cause IAR compiler internal error. - USBTMC + - Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu **Example** @@ -1154,6 +1192,7 @@ Device Controller Driver - Enhance STM32 Synopsys - Support bus events disconnection/suspend/resume/wakeup + - Improve transfer performance with optimizing xfer and fifo size - Support Highspeed port (OTG_HS) with both internal and external PHY - Support multiple usb ports with rhport=1 is highspeed on selected MCUs e.g H743, F23. It is possible to have OTG_HS to run on Fullspeed PHY (e.g lacking external PHY) @@ -1163,6 +1202,7 @@ Device Controller Driver - Support F105, F107 - Enhance STM32 fsdev + - Improve dcd fifo allocation - Fix ISTR race condition - Support remap USB IRQ on supported MCUs @@ -1171,6 +1211,7 @@ Device Controller Driver - Enhance NUC 505: enhance set configure behavior - Enhance SAMD + - Fix race condition with setup packet - Add SAMD11 option ``OPT_MCU_SAMD11`` - Add SAME5x option ``OPT_MCU_SAME5X`` @@ -1178,6 +1219,7 @@ Device Controller Driver - Fix SAMG control data toggle and stall race condition - Enhance nRF + - Fix hanged when ``tud_task()`` is called within critical section (disabled interrupt) - Fix disconnect bus event not submitted - Implement ISO transfer and ``dcd_edpt_close()`` @@ -1203,6 +1245,7 @@ USB Device - Improve USB Highspeed support with actual link speed detection with ``dcd_event_bus_reset()`` - Enhance class driver management + - ``usbd_driver_open()`` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver - Add application implemented class driver via ``usbd_app_driver_get_cb()`` - IAD is handled to assign driver id @@ -1219,11 +1262,13 @@ USB Device - USBTMC: fix descriptors when INT EP is disabled - CDC: + - Send zero length packet for end of data when needed - Add ``tud_cdc_tx_complete_cb()`` callback - Change ``tud_cdc_n_write_flush()`` return number of bytes forced to transfer, and flush when writing enough data to fifo - MIDI: + - Add packet interface - Add multiple jack descriptors - Fix MIDI driver for sysex @@ -1231,12 +1276,14 @@ USB Device - DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request - Rename some configure macro to make it clear that those are used directly for endpoint transfer + - ``CFG_TUD_HID_BUFSIZE`` to ``CFG_TUD_HID_EP_BUFSIZE`` - ``CFG_TUD_CDC_EPSIZE`` to ``CFG_TUD_CDC_EP_BUFSIZE`` - ``CFG_TUD_MSC_BUFSIZE`` to ``CFG_TUD_MSC_EP_BUFSIZE`` - ``CFG_TUD_MIDI_EPSIZE`` to ``CFG_TUD_MIDI_EP_BUFSIZE`` - HID: + - Fix gamepad template descriptor - Add multiple HID interface API - Add extra comma to HID_REPORT_ID @@ -1258,6 +1305,7 @@ Examples - Add new ``hid_multiple_interface`` - Enhance ``net_lwip_webserver`` example + - Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both) - Update lwip to STABLE-2_1_2_RELEASE for ``net_lwip_webserver`` diff --git a/docs/info/code_of_conduct.rst b/docs/info/code_of_conduct.rst new file mode 100644 index 000000000..2d70708d4 --- /dev/null +++ b/docs/info/code_of_conduct.rst @@ -0,0 +1 @@ +.. include:: ../../CODE_OF_CONDUCT.rst diff --git a/docs/info/index.rst b/docs/info/index.rst index a636f37dc..b6d30b432 100644 --- a/docs/info/index.rst +++ b/docs/info/index.rst @@ -10,3 +10,4 @@ Index changelog contributors + code_of_conduct diff --git a/docs/integration.rst b/docs/integration.rst new file mode 100644 index 000000000..3480746d0 --- /dev/null +++ b/docs/integration.rst @@ -0,0 +1,93 @@ +******************* +Integrating TinyUSB +******************* + +Once you've seen TinyUSB working in the examples, use this guide to wire the stack into your own firmware. + +Integration Steps +================= + +1. **Get TinyUSB**: Copy this repository or add it as a git submodule to your project at ``your_project/tinyusb``. +2. **Add source files**: Add every ``.c`` file from ``tinyusb/src/`` to your project build system. + +.. note:: + Only supported dcd/hcd drivers for your CPU sources under ``tinyusb/src/portable/vendor/usbip/`` are needed. Add + +3. **Configure TinyUSB**: Create ``tusb_config.h`` with macros such as ``CFG_TUSB_MCU``, ``CFG_TUSB_OS``, and class enable flags. Start from any example's ``tusb_config.h`` and tweak. +4. **Configure include paths**: Add ``your_project/tinyusb/src`` (and the folder holding ``tusb_config.h``) to your include paths. +5. **Implement USB descriptors**: For device stack, implement the ``tud_descriptor_*_cb()`` callbacks (device) or host descriptor helpers that match your product. +6. **Initialize TinyUSB**: Call ``tusb_init()`` once the clocks/peripherals are ready. Pass ``tusb_rhport_init_t`` if you need per-port settings. +7. **Handle interrupts**: From the USB ISR call ``tusb_int_handler(rhport, true)`` so the stack can process events. +8. **Run USB tasks**: Call ``tud_task()`` (device) or ``tuh_task()`` (host) regularly from the main loop, RTOS task. +9. **Implement class callbacks**: Provide the callbacks for the classes you enabled (e.g., ``tud_cdc_rx_cb()``, ``tuh_msc_mount_cb()``). + +Minimal Example +=============== + +.. code-block:: c + + #include "tusb.h" + + int main(void) { + board_init(); // Your board initialization + + // Init device stack on roothub port 0 for highspeed device + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_HIGH + }; + tusb_init(0, &dev_init); + + // init host stack on roothub port 1 for fullspeed host + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_FULL + }; + tusb_init(1, &host_init); + + while (1) { + tud_task(); // device task + tuh_task(); // host task + + app_task(); // Your application logic + } + } + + void USB0_IRQHandler(void) { + // forward interrupt port 0 to TinyUSB stack + tusb_int_handler(0, true); + } + + void USB1_IRQHandler(void) { + // forward interrupt port 0 to TinyUSB stack + tusb_int_handler(1, true); + } + +.. note:: + Unlike many libraries, TinyUSB callbacks don't need to be registered. Implement functions with the prescribed names (for example ``tud_cdc_rx_cb()``) and the stack will invoke them automatically. + +.. note:: + Naming follows ``tud_*`` for device APIs and ``tuh_*`` for host APIs. Refer to :doc:`reference/glossary` for a summary of the prefixes and callback naming rules. + + +STM32CubeIDE Integration +======================== + +To integrate TinyUSB device stack with STM32CubeIDE + +1. In STM32CubeMX, enable USB_OTG_FS/HS under Connectivity, set to "Device_Only" mode +2. Enable the USB global interrupt in NVIC Settings +3. Add ``tusb.h`` include and call ``tusb_init()`` in main.c +4. Call ``tud_task()`` in your main loop +5. In the generated ``stm32xxx_it.c``, modify the USB IRQ handler to call ``tud_int_handler(0)`` + +.. code-block:: c + + void OTG_FS_IRQHandler(void) { + tud_int_handler(0); + } + +6. Create ``tusb_config.h`` and ``usb_descriptors.c`` files + +.. tip:: + STM32CubeIDE generated code conflicts with TinyUSB. Don't use STM32's built-in USB middleware (USB Device Library) when using TinyUSB. Disable USB code generation in STM32CubeMX and let TinyUSB handle all USB functionality. diff --git a/docs/porting.rst b/docs/porting.rst new file mode 100644 index 000000000..c3076354c --- /dev/null +++ b/docs/porting.rst @@ -0,0 +1,243 @@ + +******* +Porting +******* + +TinyUSB is designed to be a universal USB protocol stack for microcontrollers. It +handles most of the high level USB protocol and relies on the microcontroller's USB peripheral for +data transactions on different endpoints. Porting is the process of adding low-level support for +the rest of the common stack. Once the low-level is implemented, it is very easy to add USB support +for the microcontroller to other projects, especially those already using TinyUSB such as CircuitPython. + +Below are instructions on how to get the cdc_msc device example running on a new microcontroller. Doing so includes adding the common code necessary for other uses while minimizing other extra code. Whenever you see a phrase or word in ``<>`` it should be replaced. + +Register defs +------------- + +The first step to adding support is including the register definitions and startup code for the +microcontroller in TinyUSB. We write the TinyUSB implementation against these structs instead of higher level functions to keep the code small and to prevent function name collisions in linking of larger projects. For ARM microcontrollers this is the CMSIS definitions. They should be +placed in the ``hw/mcu//`` directory. + +Once this is done, create a directory in ``hw/bsp/`` for the specific board you are using to test the code (duplicating an existing board's directory is the best way to get started). The board should be a readily available development board so that others can also test. + +Build +----- + +Now that those directories are in place, we can start our iteration process to get the example building successfully. To build, run from the root of TinyUSB: + +.. code-block:: bash + + make -C examples/device/cdc_msc BOARD= + +Unless you've read ahead, this will fail miserably. Now, lets get it to fail less by updating the files in the board directory. The code in the board's directory is responsible for setting up the microcontroller's clocks and pins so that USB works. TinyUSB itself only operates on the USB peripheral. The board directory also includes information what files are needed to build the example. + +One of the first things to change is the ``-DCFG_TUSB_MCU`` C flag in the ``board.mk`` file. This is used to tell TinyUSB what platform is being built. So, add an entry to ``src/tusb_option.h`` and update the ``CFLAGS`` to match. + +Update ``board.mk``'s VENDOR and CHIP_FAMILY values when creating the directory for the struct files. Duplicate one of the other sources from ``src/portable`` into ``src/portable//`` and delete all of the implementation internals. We'll cover what everything there does later. For now, get it compiling. + +Implementation +-------------- + +At this point you should get an error due to an implementation issue and hopefully the build is setup for the new MCU. You will still need to modify the ``board.mk`` to include specific ``CFLAGS``, the linker script, linker flags, source files, include directories. All file paths are relative to the top of the TinyUSB repo. + +Board Support (BSP) +^^^^^^^^^^^^^^^^^^^ + +The board support code is only used for self-contained examples and testing. It is not used when TinyUSB is part of a larger project. Its responsible for getting the MCU started and the USB peripheral clocked. It also optionally provides LED definitions that are used to blink an LED to show that the code is running. + +It is located in ``hw/bsp//board_.c``. + +``board_init()`` +~~~~~~~~~~~~~~~~ + +``board_init()`` is responsible for starting the MCU, setting up the USB clock and USB pins. It is also responsible for initializing LED pins. + +One useful clock debugging technique is to set up a PWM output at a known value such as 500hz based on the USB clock so that you can verify it is correct with a logic probe or oscilloscope. + +Setup your USB in a crystal-less mode when available. That makes the code easier to port across boards. + +``board_led_write()`` +~~~~~~~~~~~~~~~~~~~~~ + +Feel free to skip this until you want to verify your demo code is running. To implement, set the pin corresponding to the led to output a value that lights the LED when ``state`` is true. + +OS Abstraction Layer (OSAL) +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The OS Abstraction Layer is responsible for providing basic data structures for TinyUSB that may allow for concurrency when used with an RTOS. Without an RTOS it simply handles concurrency issues between the main code and interrupts. The code is almost entirely agnostic of MCU and lives in ``src/osal``. + +In RTOS configurations, ``tud_task()``/``tuh_task()`` blocks behind a synchronization structure when the event queue is empty, so that the scheduler may give the CPU to a different task. To take advantage of the library's capability to yield the CPU when there are no actionable USB device events, ensure that the ``CFG_TUSB_OS`` symbol is defined, e.g ``OPT_OS_FREERTOS`` enables the FreeRTOS scheduler to schedule other threads than that which calls ``tud_task()``/``tuh_task()``. + +Device API +^^^^^^^^^^ + +After the USB device is setup, the USB device code works by processing events on the main thread (by calling ``tud_task()``). These events are queued by the USB interrupt handler. So, there are three parts to the device low-level API: device setup, endpoint setup and interrupt processing. + +All of the code for the low-level device API is in ``src/portable///dcd_.c``. + +Device Setup +~~~~~~~~~~~~ + +``dcd_init()`` +"""""""""""""" + +Initializes the USB peripheral for device mode and enables it. +This function should enable internal D+/D- pull-up for enumeration. + +``dcd_int_enable()`` / ``dcd_int_disable()`` +"""""""""""""""""""""""""""""""""""""""""""" + +Enables or disables the USB device interrupt(s). May be used to prevent concurrency issues when mutating data structures shared between main code and the interrupt handler. + +``dcd_int_handler()`` +""""""""""""""""""""" + +Processes all the hardware generated events e.g Bus reset, new data packet from host etc ... It will be called by application in the MCU USB interrupt handler. + +``dcd_set_address()`` +""""""""""""""""""""" + +Called when the device is given a new bus address. + +If your peripheral automatically changes address during enumeration (like the nrf52) you may leave this empty and also no queue an event for the corresponding SETUP packet. + +``dcd_remote_wakeup()`` +""""""""""""""""""""""" + +Called to remote wake up host when suspended (e.g hid keyboard) + +``dcd_connect()`` / ``dcd_disconnect()`` +"""""""""""""""""""""""""""""""""""""""" + +Connect or disconnect the data-line pull-up resistor. Define only if MCU has an internal pull-up. (BSP may define for MCU without internal pull-up.) + +Special events +~~~~~~~~~~~~~~ + +You must let TinyUSB know when certain events occur so that it can continue its work. There are a few methods you can call to queue events for TinyUSB to process. + +``dcd_event_bus_signal()`` +"""""""""""""""""""""""""" + +There are a number of events that your peripheral may communicate about the state of the bus. Here is an overview of what they are. Events in **BOLD** must be provided for TinyUSB to work. + + +* **DCD_EVENT_RESET** - Triggered when the host resets the bus causing the peripheral to reset. Do any other internal reset you need from the interrupt handler such as resetting the control endpoint. +* DCD_EVENT_SOF - Signals the start of a new USB frame. + +Calls to this look like: + +.. code-block:: c + + dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true); + + +The first ``0`` is the USB peripheral number. Statically saying ``0`` is common for single USB device MCUs. + +The ``true`` indicates the call is from an interrupt handler and will always be the case when porting in this way. + +``dcd_setup_received()`` +"""""""""""""""""""""""" + +SETUP packets are a special type of transaction that can occur at any time on the control endpoint, numbered ``0``. Since they are unique, most peripherals have special handling for them. Their data is always 8 bytes in length as well. + +Calls to this look like: + +.. code-block:: c + + dcd_event_setup_received(0, setup, true); + + +As before with ``dcd_event_bus_signal()`` the first argument is the USB peripheral number and the third is true to signal its being called from an interrupt handler. The middle argument is byte array of length 8 with the contents of the SETUP packet. It can be stack allocated because it is copied into the queue. + +Endpoints +~~~~~~~~~ + +Endpoints are the core of the USB data transfer process. They come in a few forms such as control, isochronous, bulk, and interrupt. We won't cover the details here except with some caveats in open below. In general, data is transferred by setting up a buffer of a given length to be transferred on a given endpoint address and then waiting for an interrupt to signal that the transfer is finished. Further details below. + +Endpoints within USB have an address which encodes both the number and direction of an endpoint. TinyUSB provides ``tu_edpt_number()`` and ``tu_edpt_dir()`` to unpack this data from the address. Here is a snippet that does it. + +.. code-block:: c + + uint8_t epnum = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + + +``dcd_edpt_open()`` +""""""""""""""""""" + +Opening an endpoint is done for all non-control endpoints once the host picks a configuration that the device should use. At this point, the endpoint should be enabled in the peripheral and configured to match the endpoint descriptor. Pay special attention to the direction of the endpoint you can get from the helper methods above. It will likely change what registers you are setting. + +Also make sure to enable endpoint specific interrupts. + +``dcd_edpt_close()`` +"""""""""""""""""""" + +Close an endpoint. his function is used for implementing alternate settings. + +After calling this, the device should not respond to any packets directed towards this endpoint. When called, this function must abort any transfers in progress through this endpoint, before returning. + +Implementation is optional. Must be called from the USB task. Interrupts could be disabled or enabled during the call. + +``dcd_edpt_xfer()`` +""""""""""""""""""" + +``dcd_edpt_xfer()`` is responsible for configuring the peripheral to send or receive data from the host. "xfer" is short for "transfer". **This is one of the core methods you must implement for TinyUSB to work (one other is the interrupt handler).** Data from the host is the OUT direction and data to the host is IN. It is used for all endpoints including the control endpoint 0. Make sure to handle the zero-length packet STATUS packet on endpoint 0 correctly. It may be a special transaction to the peripheral. + +Besides that, all other transactions are relatively straight-forward. The endpoint address provides the endpoint +number and direction which usually determines where to write the buffer info. The buffer and its length are usually +written to a specific location in memory and the peripheral is told the data is valid. (Maybe by writing a 1 to a +register or setting a counter register to 0 for OUT or length for IN.) + +The transmit buffer alignment is determined by ``CFG_TUSB_MEM_ALIGN``. + +One potential pitfall is that the buffer may be longer than the maximum endpoint size of one USB +packet. Some peripherals can handle transmitting multiple USB packets for a provided buffer (like the SAMD21). +Others (like the nRF52) may need each USB packet queued individually. To make this work you'll need to track +some state for yourself and queue up an intermediate USB packet from the interrupt handler. + +Once the transaction is going, the interrupt handler will notify TinyUSB of transfer completion. +During transmission, the IN data buffer is guaranteed to remain unchanged in memory until the ``dcd_xfer_complete()`` function is called. + +The ``dcd_edpt_xfer()`` function must never add zero-length-packets (ZLP) on its own to a transfer. If a ZLP is required, +then it must be explicitly sent by the stack calling ``dcd_edpt_xfer()``, by calling ``dcd_edpt_xfer()`` a second time with len=0. +For control transfers, this is automatically done in ``usbd_control.c``. + +At the moment, only a single buffer can be transmitted at once. There is no provision for double-buffering. new ``dcd_edpt_xfer()`` will not +be called again on the same endpoint address until the driver calls ``dcd_xfer_complete()`` (except in cases of USB resets). + +``dcd_xfer_complete()`` +""""""""""""""""""""""" + +Once a transfer completes you must call ``dcd_xfer_complete()`` from the USB interrupt handler to let TinyUSB know that a transaction has completed. Here is a sample call: + +.. code-block:: c + + dcd_event_xfer_complete(0, ep_addr, xfer->actual_len, XFER_RESULT_SUCCESS, true); + + +The arguments are: + + +* the USB peripheral number +* the endpoint address +* the actual length of the transfer. (OUT transfers may be smaller than the buffer given in ``dcd_edpt_xfer()``) +* the result of the transfer. Failure isn't handled yet. +* ``true`` to note the call is from an interrupt handler. + +``dcd_edpt_stall()`` / ``dcd_edpt_clear_stall()`` +""""""""""""""""""""""""""""""""""""""""""""""""" + +Stalling is one way an endpoint can indicate failure such as when an unsupported command is transmitted. The pair of ``dcd_edpt_stall()``, ``dcd_edpt_clear_stall()`` help manage the stall state of all endpoints. + +Woohoo! +------- + +At this point you should have everything working! 🙂 Of course, you may not write perfect code. Here are some tips and tricks for debugging. + +Use `WireShark `_ or `a Beagle `_ to sniff the USB traffic. When things aren't working its likely very early in the USB enumeration process. Figuring out where can help clue in where the issue is. For example: + + +* If the host sends a SETUP packet and its not ACKed then your USB peripheral probably isn't started correctly. +* If the peripheral is started correctly but it still didn't work, then verify your usb clock is correct. (You did output a PWM based on it right? 🙂) +* If the SETUP packet is ACKed but nothing is sent back then you interrupt handler isn't queueing the setup packet correctly. (Also, if you are using your own code instead of an example ``tud_task()`` may not be called.) If that's OK, the ``dcd_xfer_complete()`` may not be setting up the next transaction correctly. diff --git a/docs/reference/architecture.rst b/docs/reference/architecture.rst index 8e4c6890e..70ea17ed4 100644 --- a/docs/reference/architecture.rst +++ b/docs/reference/architecture.rst @@ -42,36 +42,23 @@ Layer Structure TinyUSB follows a layered architecture from hardware to application: -.. code-block:: none +.. figure:: ../assets/stack.svg + :width: 500px + :align: left + :alt: stackup + +.. raw:: html - ┌─────────────────────────────────────────┐ - │ Application Layer │ ← Your code - ├─────────────────────────────────────────┤ - │ USB Class Drivers │ ← CDC, HID, MSC, etc. - ├─────────────────────────────────────────┤ - │ Device/Host Stack Core │ ← USB protocol handling - ├─────────────────────────────────────────┤ - │ Hardware Abstraction (DCD/HCD) │ ← MCU-specific drivers - ├─────────────────────────────────────────┤ - │ OS Abstraction (OSAL) │ ← RTOS integration - ├─────────────────────────────────────────┤ - │ Common Utilities & FIFO │ ← Shared components - └─────────────────────────────────────────┘ +
Component Overview ------------------ -**Application Layer**: Your main application code that uses TinyUSB APIs. - -**Class Drivers**: Implement specific USB device classes (CDC, HID, MSC, etc.) and handle class-specific requests. - -**Device/Host Core**: Implements USB protocol state machines, endpoint management, and core USB functionality. - -**Hardware Abstraction**: MCU-specific code that interfaces with USB peripheral hardware. - -**OS Abstraction**: Provides threading primitives and synchronization for different RTOS environments. - -**Common Utilities**: Shared code including FIFO implementations, binary helpers, and utility functions. +- **Application Layer**: Your main application code that uses TinyUSB APIs. +- **Class Drivers**: Implement specific USB device classes (CDC, HID, MSC, etc.) and handle class-specific requests. +- **Device/Host Core**: Implements USB protocol state machines, endpoint management, and core USB functionality. +- **OS Abstraction**: Provides threading primitives and synchronization for different RTOS environments. +- **Device/Host Controller Driver**: drivers that interface with MCU USB peripherals. Several MCUs may share a common driver. Device Stack Architecture ========================= @@ -85,7 +72,7 @@ Core Components - MCU-specific USB device peripheral driver - Handles endpoint configuration and data transfers - Abstracts hardware differences between MCU families -- Located in ``src/portable/VENDOR/FAMILY/`` +- Located in ``src/portable/VENDOR/USBIP/`` **USB Device Core (USBD)**: - Implements USB device state machine diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index e668e2693..12da5c90b 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -107,17 +107,20 @@ olimex_emz64 Olimex PIC32-EMZ64 pic32mz http olimex_hmz144 Olimex PIC32-HMZ144 pic32mz https://www.olimex.com/Products/PIC/Development/PIC32-HMZ144/open-source-hardware cynthion_d11 Great Scott Gadgets Cynthion samd11 https://greatscottgadgets.com/cynthion/ samd11_xplained SAMD11 Xplained Pro samd11 https://www.microchip.com/en-us/development-tool/ATSAMD11-XPRO -atsamd21_xpro SAMD21 Xplained Pro samd21 https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMD21-XPRO -circuitplayground_express Adafruit Circuit Playground Express samd21 https://www.adafruit.com/product/3333 -curiosity_nano SAMD21 Curiosty Nano samd21 https://www.microchip.com/en-us/development-tool/dm320119 -cynthion_d21 Great Scott Gadgets Cynthion samd21 https://greatscottgadgets.com/cynthion/ -feather_m0_express Adafruit Feather M0 Express samd21 https://www.adafruit.com/product/3403 -itsybitsy_m0 Adafruit ItsyBitsy M0 samd21 https://www.adafruit.com/product/3727 -metro_m0_express Adafruit Metro M0 Express samd21 https://www.adafruit.com/product/3505 -qtpy Adafruit QT Py samd21 https://www.adafruit.com/product/4600 -seeeduino_xiao Seeeduino XIAO samd21 https://wiki.seeedstudio.com/Seeeduino-XIAO/ -sparkfun_samd21_mini_usb SparkFun SAMD21 Mini samd21 https://www.sparkfun.com/products/13664 -trinket_m0 Adafruit Trinket M0 samd21 https://www.adafruit.com/product/3500 +atsamd21_xpro SAMD21 Xplained Pro samd2x_l2x https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMD21-XPRO +atsaml21_xpro SAML21 Xplained Pro samd2x_l2x https://www.microchip.com/en-us/development-tool/atsaml21-xpro-b +circuitplayground_express Adafruit Circuit Playground Express samd2x_l2x https://www.adafruit.com/product/3333 +curiosity_nano SAMD21 Curiosty Nano samd2x_l2x https://www.microchip.com/en-us/development-tool/dm320119 +cynthion_d21 Great Scott Gadgets Cynthion samd2x_l2x https://greatscottgadgets.com/cynthion/ +feather_m0_express Adafruit Feather M0 Express samd2x_l2x https://www.adafruit.com/product/3403 +itsybitsy_m0 Adafruit ItsyBitsy M0 samd2x_l2x https://www.adafruit.com/product/3727 +metro_m0_express Adafruit Metro M0 Express samd2x_l2x https://www.adafruit.com/product/3505 +qtpy Adafruit QT Py samd2x_l2x https://www.adafruit.com/product/4600 +saml22_feather SAML22 Feather samd2x_l2x https://github.com/joeycastillo/Feather-Projects/tree/main/SAML22%20Feather +seeeduino_xiao Seeeduino XIAO samd2x_l2x https://wiki.seeedstudio.com/Seeeduino-XIAO/ +sensorwatch_m0 SensorWatch samd2x_l2x https://github.com/joeycastillo/Sensor-Watch +sparkfun_samd21_mini_usb SparkFun SAMD21 Mini samd2x_l2x https://www.sparkfun.com/products/13664 +trinket_m0 Adafruit Trinket M0 samd2x_l2x https://www.adafruit.com/product/3500 d5035_01 D5035-01 samd5x_e5x https://github.com/RudolphRiedel/USB_CAN-FD feather_m4_express Adafruit Feather M4 Express samd5x_e5x https://www.adafruit.com/product/3857 itsybitsy_m4 Adafruit ItsyBitsy M4 samd5x_e5x https://www.adafruit.com/product/3800 @@ -125,10 +128,9 @@ metro_m4_express Adafruit Metro M4 Express samd5x_e5x http pybadge Adafruit PyBadge samd5x_e5x https://www.adafruit.com/product/4200 pyportal Adafruit PyPortal samd5x_e5x https://www.adafruit.com/product/4116 same54_xplained SAME54 Xplained Pro samd5x_e5x https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAME54-XPRO +same70_qmtech SAME70 QMTech same7x https://www.aliexpress.com/item/1005003173783268.html +same70_xplained SAME70 Xplained same7x https://www.microchip.com/en-us/development-tool/atsame70-xpld samg55_xplained SAMG55 Xplained Pro samg https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMG55-XPRO -atsaml21_xpro SAML21 Xplained Pro saml2x https://www.microchip.com/en-us/development-tool/atsaml21-xpro-b -saml22_feather SAML22 Feather saml2x https://github.com/joeycastillo/Feather-Projects/tree/main/SAML22%20Feather -sensorwatch_m0 SensorWatch saml2x https://github.com/joeycastillo/Sensor-Watch ========================= =================================== ========== ================================================================================= ====== MindMotion @@ -295,6 +297,7 @@ stm32l052dap52 STM32 L052 DAP stm32l0 n/a stm32l0538disco STM32 L0538 Discovery stm32l0 https://www.st.com/en/evaluation-tools/32l0538discovery.html stm32l412nucleo STM32 L412 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l412kb.html stm32l476disco STM32 L476 Disco stm32l4 https://www.st.com/en/evaluation-tools/32l476gdiscovery.html +stm32l496nucleo STM32 L496 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l496ZG-P.html stm32l4p5nucleo STM32 L4P5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4p5zg.html stm32l4r5nucleo STM32 L4R5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html stm32n6570dk STM32 N6570-DK stm32n6 https://www.st.com/en/evaluation-tools/stm32n6570-dk.html diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index e04cc2c2f..de1603383 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -4,9 +4,9 @@ Dependencies MCU low-level peripheral drivers and external libraries for building TinyUSB examples -======================================== ================================================================ ======================================== ====================================================================================================================================================================================================================================================================================================================================================================== +======================================== ================================================================ ======================================== ============================================================================================================================================================================================================================================================================================================================================================== Local Path Repo Commit Required by -======================================== ================================================================ ======================================== ====================================================================================================================================================================================================================================================================================================================================================================== +======================================== ================================================================ ======================================== ============================================================================================================================================================================================================================================================================================================================================================== hw/mcu/allwinner https://github.com/hathach/allwinner_driver.git 8e5e89e8e132c0fd90e72d5422e5d3d68232b756 fc100s hw/mcu/analog/msdk https://github.com/analogdevicesinc/msdk.git b20b398d3e5e2007594e54a74ba3d2a2e50ddd75 maxim hw/mcu/artery/at32f402_405 https://github.com/ArteryTek/AT32F402_405_Firmware_Library.git 4424515c2663e82438654e0947695295df2abdfe at32f402_405 @@ -23,7 +23,7 @@ hw/mcu/infineon/mtb-xmclib-cat3 https://github.com/Infineon/mtb-xmclib hw/mcu/microchip https://github.com/hathach/microchip_driver.git 9e8b37e307d8404033bb881623a113931e1edf27 sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg hw/mcu/mindmotion/mm32sdk https://github.com/hathach/mm32sdk.git b93e856211060ae825216c6a1d6aa347ec758843 mm32 hw/mcu/nordic/nrfx https://github.com/NordicSemiconductor/nrfx.git 11f57e578c7feea13f21c79ea0efab2630ac68c7 nrf -hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver.git 2204191ec76283371419fbcec207da02e1bc22fa nuc +hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver.git 2204191ec76283371419fbcec207da02e1bc22fa nuc100_120 nuc121_125 nuc126 nuc505 hw/mcu/nxp/lpcopen https://github.com/hathach/nxp_lpcopen.git b41cf930e65c734d8ec6de04f1d57d46787c76ae lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 hw/mcu/nxp/mcux-sdk https://github.com/nxp-mcuxpresso/mcux-sdk a1bdae309a14ec95a4f64a96d3315a4f89c397c6 kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt hw/mcu/raspberry_pi/Pico-PIO-USB https://github.com/sekigon-gonnoc/Pico-PIO-USB.git 675543bcc9baa8170f868ab7ba316d418dbcf41f rp2040 @@ -80,10 +80,10 @@ hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.gi hw/mcu/wch/ch32v103 https://github.com/openwch/ch32v103.git 7578cae0b21f86dd053a1f781b2fc6ab99d0ec17 ch32v10x hw/mcu/wch/ch32v20x https://github.com/openwch/ch32v20x.git c4c38f507e258a4e69b059ccc2dc27dde33cea1b ch32v20x hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 184f21b852cb95eed58e86e901837bc9fff68775 ch32v30x -lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32n6 stm32u0 stm32u5 stm32wb stm32wbasam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg tm4c -lib/CMSIS_6 https://github.com/ARM-software/CMSIS_6.git b0bbb0423b278ca632cfe1474eb227961d835fd2 ra +lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32u0 stm32u5 stm32wb stm32wbasam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg tm4c +lib/CMSIS_6 https://github.com/ARM-software/CMSIS_6.git 6f0a58d01aa9bd2feba212097f9afe7acd991d52 ra stm32n6 lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git cc0e0707c0c748713485b870bb980852b210877f all lib/lwip https://github.com/lwip-tcpip/lwip.git 159e31b689577dbf69cf0683bbaffbd71fa5ee10 all lib/sct_neopixel https://github.com/gsteiert/sct_neopixel.git e73e04ca63495672d955f9268e003cffe168fcd8 lpc55 tools/uf2 https://github.com/microsoft/uf2.git c594542b2faa01cc33a2b97c9fbebc38549df80a all -======================================== ================================================================ ======================================== ====================================================================================================================================================================================================================================================================================================================================================================== +======================================== ================================================================ ======================================== ============================================================================================================================================================================================================================================================================================================================================================== diff --git a/docs/reference/glossary.rst b/docs/reference/glossary.rst index 561780c53..537769c43 100644 --- a/docs/reference/glossary.rst +++ b/docs/reference/glossary.rst @@ -95,4 +95,4 @@ Glossary Product Identifier. 16-bit number assigned by vendor to identify specific products. USB-IF - USB Implementers Forum. Organization that maintains USB specifications and assigns VIDs. \ No newline at end of file + USB Implementers Forum. Organization that maintains USB specifications and assigns VIDs. diff --git a/docs/troubleshooting.rst b/docs/troubleshooting.rst index e30210d01..bb9f15166 100644 --- a/docs/troubleshooting.rst +++ b/docs/troubleshooting.rst @@ -15,13 +15,14 @@ Toolchain Problems The ARM GCC toolchain is not installed or not in PATH. *Solution*: + .. code-block:: bash # Ubuntu/Debian - sudo apt-get update && sudo apt-get install gcc-arm-none-eabi + $ sudo apt-get update && sudo apt-get install gcc-arm-none-eabi # macOS with Homebrew - brew install --cask gcc-arm-embedded + $ brew install --cask gcc-arm-embedded # Windows: Download from ARM website and add to PATH @@ -30,14 +31,15 @@ The ARM GCC toolchain is not installed or not in PATH. Build tools are missing. *Solution*: + .. code-block:: bash # Ubuntu/Debian - sudo apt-get install build-essential cmake + $ sudo apt-get install build-essential cmake # macOS - xcode-select --install - brew install cmake + $ xcode-select --install + $ brew install cmake Dependency Issues ----------------- @@ -47,10 +49,12 @@ Dependency Issues Dependencies for your MCU family are not downloaded. *Solution*: + .. code-block:: bash - # Download dependencies for specific family - python tools/get_deps.py stm32f4 # Replace with your family + # Download dependencies for specific board or family + $ python tools/get_deps.py -b stm32h743eval # Replace with your board + $ python tools/get_deps.py stm32f4 # Replace with your family # Or from example directory cd examples/device/cdc_msc @@ -61,14 +65,12 @@ Dependencies for your MCU family are not downloaded. Invalid board name in build command. *Diagnosis*: + .. code-block:: bash # List available boards for a family ls hw/bsp/stm32f4/boards/ - # List all supported boards - python tools/build.py -l - *Solution*: Use exact board name from the listing. Runtime Issues @@ -82,6 +84,7 @@ Device Mode Problems The most common issue - host doesn't see your USB device. *Diagnosis steps*: + 1. Check USB cable (must support data, not just power) 2. Enable logging: build with ``LOG=2`` 3. Use different USB ports/hosts @@ -99,17 +102,20 @@ The most common issue - host doesn't see your USB device. Device is detected but configuration fails. *Diagnosis*: + .. code-block:: bash # Build with logging enabled make BOARD=your_board LOG=2 all *Look for*: + - Setup request handling errors - Endpoint configuration problems - String descriptor issues *Solutions*: + - Implement all required descriptors - Check endpoint sizes match descriptors - Ensure control endpoint (EP0) handling is correct @@ -119,11 +125,13 @@ Device is detected but configuration fails. Device enumerates but data doesn't transfer correctly. *Common causes*: + - Buffer overruns in class callbacks - Incorrect endpoint usage (IN vs OUT) - Flow control issues in CDC class *Solutions*: + - Check buffer sizes in callbacks - Verify endpoint directions in descriptors - Implement proper flow control @@ -136,11 +144,13 @@ Host Mode Problems Host application doesn't see connected devices. *Hardware checks*: + - Power supply adequate for host mode - USB-A connector for host (not micro-USB) - Board supports host mode on selected port *Software checks*: + - ``tuh_task()`` called regularly - Host stack enabled in ``tusb_config.h`` - Correct root hub port configuration @@ -150,12 +160,14 @@ Host application doesn't see connected devices. Devices connect but enumeration fails. *Diagnosis*: + .. code-block:: bash # Enable host logging make BOARD=your_board LOG=2 RHPORT_HOST=1 all *Common issues*: + - Power supply insufficient during enumeration - Timing issues with slow devices - USB hub compatibility problems @@ -165,6 +177,7 @@ Devices connect but enumeration fails. Device enumerates but class-specific communication fails. *Troubleshooting*: + - Check device descriptors match expected class - Verify interface/endpoint assignments - Some devices need device-specific handling @@ -185,6 +198,7 @@ High CPU Usage **Symptoms**: MCU spending too much time in USB handling *Solutions*: + - Use efficient logging (RTT/SWO instead of UART) - Reduce log level in production builds - Optimize descriptor parsing @@ -197,11 +211,13 @@ STM32 Issues ------------ **Clock configuration problems**: + - USB requires precise 48MHz clock - HSE crystal must be configured correctly - PLL settings affect USB timing **Pin configuration**: + - USB pins need specific alternate function settings - VBUS sensing configuration - ID pin for OTG applications @@ -210,6 +226,7 @@ RP2040 Issues ------------- **PIO-USB for host mode**: + - Requires specific pin assignments - CPU overclocking may be needed for reliable operation - Timing-sensitive - avoid long interrupt disable periods @@ -218,8 +235,8 @@ ESP32 Issues ------------ **USB peripheral differences**: -- ESP32-S2/S3 have different USB capabilities -- Some variants only support device mode + +- ESP32-S2/S3/P4 have different USB capabilities - DMA configuration varies between models Advanced Debugging @@ -249,6 +266,7 @@ However, especially for diagnosis of crashes, it can still be useful. arm-none-eabi-gdb build/your_app.elf *Useful breakpoints*: + - ``dcd_int_handler()`` - USB interrupt entry - ``tud_task()`` - Main device task - Class-specific callbacks @@ -280,6 +298,7 @@ When reporting issues: 5. **Host environment**: OS version, USB port type **Resources**: + - GitHub Discussions: https://github.com/hathach/tinyusb/discussions - Issue Tracker: https://github.com/hathach/tinyusb/issues - Documentation: https://docs.tinyusb.org diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index ad68957df..23dfb9d80 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -10,6 +10,40 @@ get_filename_component(TOP ${TOP} ABSOLUTE) set(UF2CONV_PY ${TOP}/tools/uf2/utils/uf2conv.py) +function(family_resolve_board BOARD_NAME BOARD_PATH_OUT) + if ("${BOARD_NAME}" STREQUAL "") + message(FATAL_ERROR "You must set BOARD (e.g. metro_m4_express, raspberry_pi_pico). Use -DBOARD=xxx on the cmake command line.") + endif() + + file(GLOB _board_paths + LIST_DIRECTORIES true + RELATIVE ${TOP}/hw/bsp + ${TOP}/hw/bsp/*/boards/* + ) + + set(_hint_names "") + foreach(_board_path ${_board_paths}) + get_filename_component(_board_name ${_board_path} NAME) + if (_board_name STREQUAL "${BOARD_NAME}") + set(${BOARD_PATH_OUT} ${_board_path} PARENT_SCOPE) + return() + endif() + string(FIND "${_board_name}" "${BOARD_NAME}" _pos) + if (_pos EQUAL 0) + list(APPEND _hint_names ${_board_name}) + endif() + endforeach() + + if (_hint_names) + list(REMOVE_DUPLICATES _hint_names) + list(SORT _hint_names) + list(JOIN _hint_names ", " _hint_str) + message(FATAL_ERROR "BOARD '${BOARD_NAME}' not found. Boards with the same prefix:\n${_hint_str}") + else() + message(FATAL_ERROR "BOARD '${BOARD_NAME}' not found under hw/bsp/*/boards") + endif() +endfunction() + #------------------------------------------------------------- # Toolchain # Can be changed via -DTOOLCHAIN=gcc|iar or -DCMAKE_C_COMPILER= or ENV{CC}= @@ -78,21 +112,8 @@ endif () # FAMILY and BOARD #------------------------------------------------------------- if (NOT DEFINED FAMILY) - if (NOT DEFINED BOARD) - message(FATAL_ERROR "You must set a BOARD variable for the build (e.g. metro_m4_express, raspberry_pi_pico). - You can do this via -DBOARD=xxx on the cmake command line") - endif () - - # Find path contains BOARD - file(GLOB BOARD_PATH LIST_DIRECTORIES true - RELATIVE ${TOP}/hw/bsp - ${TOP}/hw/bsp/*/boards/${BOARD} - ) - if (NOT BOARD_PATH) - message(FATAL_ERROR "Could not detect FAMILY from BOARD=${BOARD}") - endif () + family_resolve_board("${BOARD}" BOARD_PATH) - # replace / with ; so that we can get the first element as FAMILY string(REPLACE "/" ";" BOARD_PATH ${BOARD_PATH}) list(GET BOARD_PATH 0 FAMILY) set(FAMILY ${FAMILY} CACHE STRING "Board family") diff --git a/tools/gen_doc.py b/tools/gen_doc.py index ab07bc116..3920531d5 100755 --- a/tools/gen_doc.py +++ b/tools/gen_doc.py @@ -23,7 +23,7 @@ def gen_deps_doc(): Dependencies ************ -MCU low-level peripheral driver and external libraries for building TinyUSB examples +MCU low-level peripheral drivers and external libraries for building TinyUSB examples {tabulate(df, headers="keys", tablefmt='rst')} """ -- cgit v1.3.1 From fc661abc18beefb57f5d1352219ed72678b59e0b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 12 Nov 2025 10:41:58 +0700 Subject: migrate midi_device to use edpt stream API also add tud_midi_n_packet_write/read_n() --- .clang-format | 1 + src/class/midi/midi_device.c | 511 ++++++++++++++++----------------------- src/class/midi/midi_device.h | 130 ++++------ src/class/vendor/vendor_device.c | 3 +- src/common/tusb_fifo.c | 25 +- src/common/tusb_fifo.h | 38 +-- src/common/tusb_private.h | 14 +- src/tusb.c | 4 +- 8 files changed, 288 insertions(+), 438 deletions(-) diff --git a/.clang-format b/.clang-format index 907dd7cdd..c278fec37 100644 --- a/.clang-format +++ b/.clang-format @@ -70,6 +70,7 @@ IncludeCategories: - Regex: '.*' Priority: 3 IncludeIsMainRegex: '([-_](test|unittest))?$' +IndentPPDirectives: BeforeHash InsertBraces: true IndentCaseLabels: true InsertNewlineAtEOF: true diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index 7dac7c4a5..f065e486a 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -36,13 +36,19 @@ #include "midi_device.h" +//--------------------------------------------------------------------+ +// Weak stubs: invoked if no strong implementation is available +//--------------------------------------------------------------------+ +TU_ATTR_WEAK void tud_midi_rx_cb(uint8_t itf) { + (void)itf; +} + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ typedef struct { + uint8_t rhport; uint8_t itf_num; - uint8_t ep_in; - uint8_t ep_out; // For Stream read()/write() API // Messages are always 4 bytes long, queue them for reading and writing so the @@ -51,134 +57,97 @@ typedef struct { midi_driver_stream_t stream_read; /*------------- From this point, data is not cleared by bus reset -------------*/ - // FIFO - tu_fifo_t rx_ff; - tu_fifo_t tx_ff; - uint8_t rx_ff_buf[CFG_TUD_MIDI_RX_BUFSIZE]; - uint8_t tx_ff_buf[CFG_TUD_MIDI_TX_BUFSIZE]; - - #if CFG_FIFO_MUTEX - osal_mutex_def_t rx_ff_mutex; - osal_mutex_def_t tx_ff_mutex; - #endif + // Endpoint stream + struct { + tu_edpt_stream_t tx; + tu_edpt_stream_t rx; + + uint8_t rx_ff_buf[CFG_TUD_MIDI_RX_BUFSIZE]; + uint8_t tx_ff_buf[CFG_TUD_MIDI_TX_BUFSIZE]; + } ep_stream; } midid_interface_t; -#define ITF_MEM_RESET_SIZE offsetof(midid_interface_t, rx_ff) +#define ITF_MEM_RESET_SIZE offsetof(midid_interface_t, ep_stream) + +static midid_interface_t _midid_itf[CFG_TUD_MIDI]; // Endpoint Transfer buffer -CFG_TUD_MEM_SECTION static struct { +typedef struct { TUD_EPBUF_DEF(epin, CFG_TUD_MIDI_EP_BUFSIZE); TUD_EPBUF_DEF(epout, CFG_TUD_MIDI_EP_BUFSIZE); -} _midid_epbuf[CFG_TUD_MIDI]; +} midid_epbuf_t; + +CFG_TUD_MEM_SECTION static midid_epbuf_t _midid_epbuf[CFG_TUD_MIDI]; //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -static midid_interface_t _midid_itf[CFG_TUD_MIDI]; - bool tud_midi_n_mounted (uint8_t itf) { - midid_interface_t* midi = &_midid_itf[itf]; - return midi->ep_in && midi->ep_out; -} + midid_interface_t *p_midi = &_midid_itf[itf]; -static void _prep_out_transaction(uint8_t idx) { - const uint8_t rhport = 0; - midid_interface_t* p_midi = &_midid_itf[idx]; - uint16_t available = tu_fifo_remaining(&p_midi->rx_ff); - - // Prepare for incoming data but only allow what we can store in the ring buffer. - // TODO Actually we can still carry out the transfer, keeping count of received bytes - // and slowly move it to the FIFO when read(). - // This pre-check reduces endpoint claiming - TU_VERIFY(available >= CFG_TUD_MIDI_EP_BUFSIZE, ); - - // claim endpoint - TU_VERIFY(usbd_edpt_claim(rhport, p_midi->ep_out), ); - - // fifo can be changed before endpoint is claimed - available = tu_fifo_remaining(&p_midi->rx_ff); - - if ( available >= CFG_TUD_MIDI_EP_BUFSIZE ) { - usbd_edpt_xfer(rhport, p_midi->ep_out, _midid_epbuf[idx].epout, CFG_TUD_MIDI_EP_BUFSIZE); - }else - { - // Release endpoint since we don't make any transfer - usbd_edpt_release(rhport, p_midi->ep_out); - } -} - - -//--------------------------------------------------------------------+ -// Weak stubs: invoked if no strong implementation is available -//--------------------------------------------------------------------+ -TU_ATTR_WEAK void tud_midi_rx_cb(uint8_t itf) { - (void) itf; + const bool tx_opened = tu_edpt_stream_is_opened(&p_midi->ep_stream.tx); + const bool rx_opened = tu_edpt_stream_is_opened(&p_midi->ep_stream.rx); + return tx_opened && rx_opened; } //--------------------------------------------------------------------+ // READ API //--------------------------------------------------------------------+ -uint32_t tud_midi_n_available(uint8_t itf, uint8_t cable_num) -{ +uint32_t tud_midi_n_available(uint8_t itf, uint8_t cable_num) { (void) cable_num; - - midid_interface_t* midi = &_midid_itf[itf]; - const midi_driver_stream_t* stream = &midi->stream_read; + const midid_interface_t *p_midi = &_midid_itf[itf]; + const midi_driver_stream_t *stream = &p_midi->stream_read; + const tu_edpt_stream_t *ep_str = &p_midi->ep_stream.rx; // when using with packet API stream total & index are both zero - return tu_fifo_count(&midi->rx_ff) + (uint8_t) (stream->total - stream->index); + return tu_edpt_stream_read_available(ep_str) + (uint8_t)(stream->total - stream->index); } -uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void* buffer, uint32_t bufsize) -{ +uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void *buffer, uint32_t bufsize) { (void) cable_num; - TU_VERIFY(bufsize, 0); - - uint8_t* buf8 = (uint8_t*) buffer; + TU_VERIFY(buffer != NULL && bufsize > 0, 0); - midid_interface_t* midi = &_midid_itf[itf]; - midi_driver_stream_t* stream = &midi->stream_read; + uint8_t *buf8 = (uint8_t *)buffer; + midid_interface_t *p_midi = &_midid_itf[itf]; + midi_driver_stream_t *stream = &p_midi->stream_read; uint32_t total_read = 0; - while( bufsize ) - { + while (bufsize > 0) { // Get new packet from fifo, then set packet expected bytes - if ( stream->total == 0 ) - { - // return if there is no more data from fifo - if ( !tud_midi_n_packet_read(itf, stream->buffer) ) return total_read; + if (stream->total == 0) { + if (!tud_midi_n_packet_read(itf, stream->buffer)) { + return total_read; // return if there is no more data from fifo + } - uint8_t const code_index = stream->buffer[0] & 0x0f; + const uint8_t code_index = stream->buffer[0] & 0x0f; // MIDI 1.0 Table 4-1: Code Index Number Classifications - switch(code_index) - { + switch (code_index) { case MIDI_CIN_MISC: case MIDI_CIN_CABLE_EVENT: // These are reserved and unused, possibly issue somewhere, skip this packet return 0; - break; case MIDI_CIN_SYSEX_END_1BYTE: case MIDI_CIN_1BYTE_DATA: stream->total = 1; - break; + break; case MIDI_CIN_SYSCOM_2BYTE : case MIDI_CIN_SYSEX_END_2BYTE : case MIDI_CIN_PROGRAM_CHANGE : case MIDI_CIN_CHANNEL_PRESSURE : stream->total = 2; - break; + break; default: stream->total = 3; - break; + break; } } // Copy data up to bufsize - uint8_t const count = (uint8_t) tu_min32(stream->total - stream->index, bufsize); + const uint8_t count = (uint8_t)tu_min32((uint32_t)(stream->total - stream->index), bufsize); // Skip the header (1st byte) in the buffer TU_VERIFY(0 == tu_memcpy_s(buf8, bufsize, stream->buffer + 1 + stream->index, count)); @@ -189,8 +158,7 @@ uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void* buffer, ui bufsize -= count; // complete current event packet, reset stream - if ( stream->total == stream->index ) - { + if (stream->total == stream->index) { stream->index = 0; stream->total = 0; } @@ -199,150 +167,107 @@ uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void* buffer, ui return total_read; } -bool tud_midi_n_packet_read (uint8_t itf, uint8_t packet[4]) -{ - midid_interface_t* midi = &_midid_itf[itf]; - TU_VERIFY(midi->ep_out); +bool tud_midi_n_packet_read(uint8_t itf, uint8_t packet[4]) { + midid_interface_t *p_midi = &_midid_itf[itf]; + tu_edpt_stream_t *ep_str = &p_midi->ep_stream.rx; + TU_VERIFY(tu_edpt_stream_is_opened(ep_str)); + return 4 == tu_edpt_stream_read(p_midi->rhport, ep_str, packet, 4); +} + +uint32_t tud_midi_n_packet_read_n(uint8_t itf, uint8_t packets[], uint32_t max_packets) { + midid_interface_t *p_midi = &_midid_itf[itf]; + tu_edpt_stream_t *ep_str = &p_midi->ep_stream.rx; + TU_VERIFY(tu_edpt_stream_is_opened(ep_str), 0); - const uint32_t num_read = tu_fifo_read_n(&midi->rx_ff, packet, 4); - _prep_out_transaction(itf); - return (num_read == 4); + const uint32_t num_read = tu_edpt_stream_read(p_midi->rhport, ep_str, packets, 4u * max_packets); + return num_read >> 2u; } //--------------------------------------------------------------------+ // WRITE API //--------------------------------------------------------------------+ - -static uint32_t write_flush(uint8_t idx) { - midid_interface_t* midi = &_midid_itf[idx]; - - if (!tu_fifo_count(&midi->tx_ff)) { - return 0; // No data to send - } - - const uint8_t rhport = 0; - - // skip if previous transfer not complete - TU_VERIFY( usbd_edpt_claim(rhport, midi->ep_in), 0 ); - - uint16_t count = tu_fifo_read_n(&midi->tx_ff, _midid_epbuf[idx].epin, CFG_TUD_MIDI_EP_BUFSIZE); - - if (count) { - TU_ASSERT( usbd_edpt_xfer(rhport, midi->ep_in, _midid_epbuf[idx].epin, count), 0 ); - return count; - }else { - // Release endpoint since we don't make any transfer - usbd_edpt_release(rhport, midi->ep_in); - return 0; - } -} - -uint32_t tud_midi_n_stream_write(uint8_t itf, uint8_t cable_num, const uint8_t* buffer, uint32_t bufsize) -{ - midid_interface_t* midi = &_midid_itf[itf]; - TU_VERIFY(midi->ep_in, 0); - - midi_driver_stream_t* stream = &midi->stream_write; +uint32_t tud_midi_n_stream_write(uint8_t itf, uint8_t cable_num, const uint8_t *buffer, uint32_t bufsize) { + midid_interface_t *p_midi = &_midid_itf[itf]; + midi_driver_stream_t *stream = &p_midi->stream_write; + tu_edpt_stream_t *ep_str = &p_midi->ep_stream.tx; + TU_VERIFY(tu_edpt_stream_is_opened(ep_str), 0); uint32_t i = 0; - while ( (i < bufsize) && (tu_fifo_remaining(&midi->tx_ff) >= 4) ) - { + while (i < bufsize) { + if (tu_edpt_stream_write_available(p_midi->rhport, ep_str) < 4) { + break; + } + const uint8_t data = buffer[i]; i++; - if ( stream->index == 0 ) - { + if (stream->index == 0) { //------------- New event packet -------------// const uint8_t msg = data >> 4; - stream->index = 2; + stream->index = 2; stream->buffer[1] = data; // Check to see if we're still in a SysEx transmit. - if ( ((stream->buffer[0]) & 0xF) == MIDI_CIN_SYSEX_START ) - { - if ( data == MIDI_STATUS_SYSEX_END ) - { - stream->buffer[0] = (uint8_t) ((cable_num << 4) | MIDI_CIN_SYSEX_END_1BYTE); - stream->total = 2; - } - else - { + if (((stream->buffer[0]) & 0xF) == MIDI_CIN_SYSEX_START) { + if (data == MIDI_STATUS_SYSEX_END) { + stream->buffer[0] = (uint8_t)((cable_num << 4) | MIDI_CIN_SYSEX_END_1BYTE); + stream->total = 2; + } else { stream->total = 4; } - } - else if ( (msg >= 0x8 && msg <= 0xB) || msg == 0xE ) - { + } else if ((msg >= 0x8 && msg <= 0xB) || msg == 0xE) { // Channel Voice Messages - stream->buffer[0] = (uint8_t) ((cable_num << 4) | msg); - stream->total = 4; - } - else if ( msg == 0xC || msg == 0xD) - { + stream->buffer[0] = (uint8_t)((cable_num << 4) | msg); + stream->total = 4; + } else if (msg == 0xC || msg == 0xD) { // Channel Voice Messages, two-byte variants (Program Change and Channel Pressure) - stream->buffer[0] = (uint8_t) ((cable_num << 4) | msg); - stream->total = 3; - } - else if ( msg == 0xf ) - { + stream->buffer[0] = (uint8_t)((cable_num << 4) | msg); + stream->total = 3; + } else if (msg == 0xf) { // System message - if ( data == MIDI_STATUS_SYSEX_START ) - { + if (data == MIDI_STATUS_SYSEX_START) { stream->buffer[0] = MIDI_CIN_SYSEX_START; - stream->total = 4; - } - else if ( data == MIDI_STATUS_SYSCOM_TIME_CODE_QUARTER_FRAME || data == MIDI_STATUS_SYSCOM_SONG_SELECT ) - { + stream->total = 4; + } else if (data == MIDI_STATUS_SYSCOM_TIME_CODE_QUARTER_FRAME || data == MIDI_STATUS_SYSCOM_SONG_SELECT) { stream->buffer[0] = MIDI_CIN_SYSCOM_2BYTE; - stream->total = 3; - } - else if ( data == MIDI_STATUS_SYSCOM_SONG_POSITION_POINTER ) - { + stream->total = 3; + } else if (data == MIDI_STATUS_SYSCOM_SONG_POSITION_POINTER) { stream->buffer[0] = MIDI_CIN_SYSCOM_3BYTE; - stream->total = 4; - } - else - { + stream->total = 4; + } else { stream->buffer[0] = MIDI_CIN_SYSEX_END_1BYTE; - stream->total = 2; + stream->total = 2; } stream->buffer[0] |= (uint8_t)(cable_num << 4); - } - else - { + } else { // Pack individual bytes if we don't support packing them into words. - stream->buffer[0] = (uint8_t) (cable_num << 4 | 0xf); + stream->buffer[0] = (uint8_t)(cable_num << 4 | 0xf); stream->buffer[2] = 0; stream->buffer[3] = 0; - stream->index = 2; - stream->total = 2; + stream->total = 2; // index already set to 2 } - } - else - { + } else { //------------- On-going (buffering) packet -------------// - TU_ASSERT(stream->index < 4, i); stream->buffer[stream->index] = data; stream->index++; // See if this byte ends a SysEx. - if ( (stream->buffer[0] & 0xF) == MIDI_CIN_SYSEX_START && data == MIDI_STATUS_SYSEX_END ) - { - stream->buffer[0] = (uint8_t) ((cable_num << 4) | (MIDI_CIN_SYSEX_START + (stream->index - 1))); - stream->total = stream->index; + if ((stream->buffer[0] & 0xF) == MIDI_CIN_SYSEX_START && data == MIDI_STATUS_SYSEX_END) { + stream->buffer[0] = (uint8_t)((cable_num << 4) | (MIDI_CIN_SYSEX_START + (stream->index - 1))); + stream->total = stream->index; } } // Send out packet - if ( stream->index == stream->total ) - { + if (stream->index == stream->total) { // zeroes unused bytes for (uint8_t idx = stream->total; idx < 4; idx++) { stream->buffer[idx] = 0; } - const uint16_t count = tu_fifo_write_n(&midi->tx_ff, stream->buffer, 4); + const uint32_t count = tu_edpt_stream_write(p_midi->rhport, ep_str, stream->buffer, 4); // complete current event packet, reset stream stream->index = stream->total = 0; @@ -352,25 +277,37 @@ uint32_t tud_midi_n_stream_write(uint8_t itf, uint8_t cable_num, const uint8_t* } } - write_flush(itf); + (void)tu_edpt_stream_write_xfer(p_midi->rhport, ep_str); return i; } bool tud_midi_n_packet_write (uint8_t itf, const uint8_t packet[4]) { - midid_interface_t* midi = &_midid_itf[itf]; - TU_VERIFY(midi->ep_in); + midid_interface_t *p_midi = &_midid_itf[itf]; + tu_edpt_stream_t *ep_str = &p_midi->ep_stream.tx; + TU_VERIFY(tu_edpt_stream_is_opened(ep_str)); - if (tu_fifo_remaining(&midi->tx_ff) < 4) { - return false; - } - - tu_fifo_write_n(&midi->tx_ff, packet, 4); - write_flush(itf); + TU_VERIFY(tu_edpt_stream_write_available(p_midi->rhport, ep_str) >= 4); + TU_VERIFY(tu_edpt_stream_write(p_midi->rhport, ep_str, packet, 4) > 0); + (void)tu_edpt_stream_write_xfer(p_midi->rhport, ep_str); return true; } +uint32_t tud_midi_n_packet_write_n(uint8_t itf, const uint8_t packets[], uint32_t n_packets) { + midid_interface_t *p_midi = &_midid_itf[itf]; + tu_edpt_stream_t *ep_str = &p_midi->ep_stream.tx; + TU_VERIFY(tu_edpt_stream_is_opened(ep_str), 0); + + uint32_t n_bytes = tu_edpt_stream_write_available(p_midi->rhport, ep_str); + n_bytes = tu_min32(tu_align4(n_bytes), n_packets << 2u); + + const uint32_t n_write = tu_edpt_stream_write(p_midi->rhport, ep_str, packets, n_bytes); + (void)tu_edpt_stream_write_xfer(p_midi->rhport, ep_str); + + return n_write >> 2u; +} + //--------------------------------------------------------------------+ // USBD Driver API //--------------------------------------------------------------------+ @@ -378,72 +315,64 @@ void midid_init(void) { tu_memclr(_midid_itf, sizeof(_midid_itf)); for (uint8_t i = 0; i < CFG_TUD_MIDI; i++) { - midid_interface_t* midi = &_midid_itf[i]; - - // config fifo - tu_fifo_config(&midi->rx_ff, midi->rx_ff_buf, CFG_TUD_MIDI_RX_BUFSIZE, 1, false); // true, true - tu_fifo_config(&midi->tx_ff, midi->tx_ff_buf, CFG_TUD_MIDI_TX_BUFSIZE, 1, false); // OBVS. + midid_interface_t *p_midi = &_midid_itf[i]; + midid_epbuf_t *p_epbuf = &_midid_epbuf[i]; - #if CFG_FIFO_MUTEX - osal_mutex_t mutex_rd = osal_mutex_create(&midi->rx_ff_mutex); - osal_mutex_t mutex_wr = osal_mutex_create(&midi->tx_ff_mutex); - TU_ASSERT(mutex_wr != NULL && mutex_wr != NULL, ); + tu_edpt_stream_init( + &p_midi->ep_stream.rx, false, false, false, p_midi->ep_stream.rx_ff_buf, CFG_TUD_MIDI_RX_BUFSIZE, + p_epbuf->epout, CFG_TUD_MIDI_EP_BUFSIZE); - tu_fifo_config_mutex(&midi->rx_ff, NULL, mutex_rd); - tu_fifo_config_mutex(&midi->tx_ff, mutex_wr, NULL); - #endif + tu_edpt_stream_init( + &p_midi->ep_stream.tx, false, true, false, p_midi->ep_stream.tx_ff_buf, CFG_TUD_MIDI_TX_BUFSIZE, p_epbuf->epin, + CFG_TUD_MIDI_EP_BUFSIZE); } } bool midid_deinit(void) { - #if CFG_FIFO_MUTEX - for(uint8_t i=0; irx_ff.mutex_rd; - osal_mutex_t mutex_wr = midi->tx_ff.mutex_wr; - - if (mutex_rd) { - osal_mutex_delete(mutex_rd); - tu_fifo_config_mutex(&midi->rx_ff, NULL, NULL); - } - - if (mutex_wr) { - osal_mutex_delete(mutex_wr); - tu_fifo_config_mutex(&midi->tx_ff, NULL, NULL); - } + for (uint8_t i = 0; i < CFG_TUD_MIDI; i++) { + midid_interface_t *p_midi = &_midid_itf[i]; + tu_edpt_stream_deinit(&p_midi->ep_stream.rx); + tu_edpt_stream_deinit(&p_midi->ep_stream.tx); } - #endif - return true; } -void midid_reset(uint8_t rhport) -{ - (void) rhport; +void midid_reset(uint8_t rhport) { + (void)rhport; + for (uint8_t i = 0; i < CFG_TUD_MIDI; i++) { + midid_interface_t *p_midi = &_midid_itf[i]; + tu_memclr(p_midi, ITF_MEM_RESET_SIZE); + + tu_edpt_stream_clear(&p_midi->ep_stream.rx); + tu_edpt_stream_close(&p_midi->ep_stream.rx); - for(uint8_t i=0; irx_ff); - tu_fifo_clear(&midi->tx_ff); + tu_edpt_stream_clear(&p_midi->ep_stream.tx); + tu_edpt_stream_close(&p_midi->ep_stream.tx); } } -uint16_t midid_open(uint8_t rhport, const tusb_desc_interface_t* desc_itf, uint16_t max_len) { - uint16_t drv_len = 0; - uint8_t const * p_desc = (uint8_t const *)desc_itf; +TU_ATTR_ALWAYS_INLINE static inline uint8_t find_midi_itf(uint8_t ep_addr) { + for (uint8_t idx = 0; idx < CFG_TUD_MIDI; idx++) { + const midid_interface_t *p_midi = &_midid_itf[idx]; + if (ep_addr == p_midi->ep_stream.rx.ep_addr || ep_addr == p_midi->ep_stream.tx.ep_addr) { + return idx; + } + } + return TUSB_INDEX_INVALID_8; +} + +uint16_t midid_open(uint8_t rhport, const tusb_desc_interface_t *desc_itf, uint16_t max_len) { + const uint8_t *p_desc = (const uint8_t *)desc_itf; + const uint8_t *desc_end = p_desc + max_len; // 1st Interface is Audio Control v1 (optional) if (TUSB_CLASS_AUDIO == desc_itf->bInterfaceClass && AUDIO_SUBCLASS_CONTROL == desc_itf->bInterfaceSubClass && AUDIO_FUNC_PROTOCOL_CODE_UNDEF == desc_itf->bInterfaceProtocol) { - drv_len = tu_desc_len(desc_itf); p_desc = tu_desc_next(desc_itf); // Skip Class Specific descriptors - while (TUSB_DESC_CS_INTERFACE == tu_desc_type(p_desc) && drv_len <= max_len) { - drv_len += tu_desc_len(p_desc); - p_desc = tu_desc_next(p_desc); + while (tu_desc_in_bounds(p_desc, desc_end) && TUSB_DESC_CS_INTERFACE == tu_desc_type(p_desc)) { + p_desc = tu_desc_next(p_desc); } } @@ -451,59 +380,44 @@ uint16_t midid_open(uint8_t rhport, const tusb_desc_interface_t* desc_itf, uint1 TU_VERIFY(TUSB_DESC_INTERFACE == tu_desc_type(p_desc), 0); const tusb_desc_interface_t* desc_midi = (const tusb_desc_interface_t*) p_desc; - TU_VERIFY(TUSB_CLASS_AUDIO == desc_midi->bInterfaceClass && - AUDIO_SUBCLASS_MIDI_STREAMING == desc_midi->bInterfaceSubClass && - AUDIO_FUNC_PROTOCOL_CODE_UNDEF == desc_midi->bInterfaceProtocol, 0); + TU_VERIFY(TUSB_CLASS_AUDIO == desc_midi->bInterfaceClass && + AUDIO_SUBCLASS_MIDI_STREAMING == desc_midi->bInterfaceSubClass && + AUDIO_FUNC_PROTOCOL_CODE_UNDEF == desc_midi->bInterfaceProtocol, + 0); - // Find available interface - midid_interface_t * p_midi = NULL; - uint8_t idx; - for(idx=0; idxrhport = rhport; p_midi->itf_num = desc_midi->bInterfaceNumber; (void) p_midi->itf_num; - // next descriptor - drv_len += tu_desc_len(p_desc); - p_desc = tu_desc_next(p_desc); + p_desc = tu_desc_next(p_desc); // Find and open endpoint descriptors - uint8_t found_endpoints = 0; - while ( (found_endpoints < desc_midi->bNumEndpoints) && (drv_len <= max_len) ) - { - if ( TUSB_DESC_ENDPOINT == tu_desc_type(p_desc) ) - { - TU_ASSERT(usbd_edpt_open(rhport, (const tusb_desc_endpoint_t*) p_desc), 0); - uint8_t ep_addr = ((const tusb_desc_endpoint_t*) p_desc)->bEndpointAddress; - - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) - { - p_midi->ep_in = ep_addr; + uint8_t found_ep = 0; + while ((found_ep < desc_midi->bNumEndpoints) && tu_desc_in_bounds(p_desc, desc_end)) { + if (TUSB_DESC_ENDPOINT == tu_desc_type(p_desc)) { + const tusb_desc_endpoint_t *desc_ep = (const tusb_desc_endpoint_t *)p_desc; + TU_ASSERT(usbd_edpt_open(rhport, desc_ep), 0); + const uint8_t ep_addr = ((const tusb_desc_endpoint_t *)p_desc)->bEndpointAddress; + + if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { + tu_edpt_stream_open(&p_midi->ep_stream.tx, desc_ep); } else { - p_midi->ep_out = ep_addr; + tu_edpt_stream_open(&p_midi->ep_stream.rx, desc_ep); + TU_ASSERT(tu_edpt_stream_read_xfer(rhport, &p_midi->ep_stream.rx) > 0, 0); // prepare to receive data } - // Class Specific MIDI Stream endpoint descriptor - drv_len += tu_desc_len(p_desc); - p_desc = tu_desc_next(p_desc); - - found_endpoints += 1; + p_desc = tu_desc_next(p_desc); // skip CS Endpoint descriptor + found_ep++; } - drv_len += tu_desc_len(p_desc); - p_desc = tu_desc_next(p_desc); + p_desc = tu_desc_next(p_desc); } - // Prepare for incoming data - _prep_out_transaction(idx); - - return drv_len; + return (uint16_t)(p_desc - (const uint8_t *)desc_itf); } // Invoked when a control transfer occurred on an interface of this class @@ -514,44 +428,31 @@ bool midid_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_req return false; // driver doesn't support any request yet } -bool midid_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) -{ - (void) result; - (void) rhport; - - uint8_t idx; - midid_interface_t* p_midi; +bool midid_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { + (void)result; - // Identify which interface to use - for (idx = 0; idx < CFG_TUD_MIDI; idx++) { - p_midi = &_midid_itf[idx]; - if ((ep_addr == p_midi->ep_out) || (ep_addr == p_midi->ep_in)) { - break; - } - } + uint8_t idx = find_midi_itf(ep_addr); TU_ASSERT(idx < CFG_TUD_MIDI); + midid_interface_t *p_midi = &_midid_itf[idx]; - // receive new data - if (ep_addr == p_midi->ep_out) { - tu_fifo_write_n(&p_midi->rx_ff, _midid_epbuf[idx].epout, (uint16_t)xferred_bytes); - - // invoke receive callback if available - tud_midi_rx_cb(idx); - - // prepare for next - // TODO for now ep_out is not used by public API therefore there is no race condition, - // and does not need to claim like ep_in - _prep_out_transaction(idx); - } else if (ep_addr == p_midi->ep_in) { - if (0 == write_flush(idx)) { - // If there is no data left, a ZLP should be sent if - // xferred_bytes is multiple of EP size and not zero - if (!tu_fifo_count(&p_midi->tx_ff) && xferred_bytes && (0 == (xferred_bytes % CFG_TUD_MIDI_EP_BUFSIZE))) { - if (usbd_edpt_claim(rhport, p_midi->ep_in)) { - usbd_edpt_xfer(rhport, p_midi->ep_in, NULL, 0); - } - } + tu_edpt_stream_t *ep_st_rx = &p_midi->ep_stream.rx; + tu_edpt_stream_t *ep_st_tx = &p_midi->ep_stream.tx; + + if (ep_addr == ep_st_rx->ep_addr) { + // Received new data: put into stream's fifo + if (result == XFER_RESULT_SUCCESS) { + tu_edpt_stream_read_xfer_complete(ep_st_rx, xferred_bytes); + tud_midi_rx_cb(idx); // invoke callback } + tu_edpt_stream_read_xfer(rhport, ep_st_rx); // prepare for next data + } else if (ep_addr == ep_st_tx->ep_addr && result == XFER_RESULT_SUCCESS) { + // sent complete: try to send more if possible + if (0 == tu_edpt_stream_write_xfer(rhport, ep_st_tx)) { + // If there is no data left, a ZLP should be sent if needed + (void)tu_edpt_stream_write_zlp_if_needed(rhport, ep_st_tx, xferred_bytes); + } + } else { + return false; } return true; diff --git a/src/class/midi/midi_device.h b/src/class/midi/midi_device.h index d23516cec..ddbc2f9f0 100644 --- a/src/class/midi/midi_device.h +++ b/src/class/midi/midi_device.h @@ -36,21 +36,21 @@ #if !defined(CFG_TUD_MIDI_EP_BUFSIZE) && defined(CFG_TUD_MIDI_EPSIZE) #warning CFG_TUD_MIDI_EPSIZE is renamed to CFG_TUD_MIDI_EP_BUFSIZE, please update to use the new name - #define CFG_TUD_MIDI_EP_BUFSIZE CFG_TUD_MIDI_EPSIZE + #define CFG_TUD_MIDI_EP_BUFSIZE CFG_TUD_MIDI_EPSIZE #endif #ifndef CFG_TUD_MIDI_EP_BUFSIZE - #define CFG_TUD_MIDI_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + #define CFG_TUD_MIDI_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #endif #ifdef __cplusplus - extern "C" { +extern "C" { #endif -/** \addtogroup MIDI_Serial Serial - * @{ - * \defgroup MIDI_Serial_Device Device - * @{ */ +//--------------------------------------------------------------------+ +// Application Callback API (optional) +//--------------------------------------------------------------------+ +void tud_midi_rx_cb(uint8_t itf); //--------------------------------------------------------------------+ // Application API (Multiple Interfaces) @@ -58,117 +58,77 @@ //--------------------------------------------------------------------+ // Check if midi interface is mounted -bool tud_midi_n_mounted (uint8_t itf); +bool tud_midi_n_mounted(uint8_t itf); // Get the number of bytes available for reading -uint32_t tud_midi_n_available (uint8_t itf, uint8_t cable_num); - -// Read byte stream (legacy) -uint32_t tud_midi_n_stream_read (uint8_t itf, uint8_t cable_num, void* buffer, uint32_t bufsize); - -// Write byte Stream (legacy) -uint32_t tud_midi_n_stream_write (uint8_t itf, uint8_t cable_num, uint8_t const* buffer, uint32_t bufsize); - -// Read event packet (4 bytes) -bool tud_midi_n_packet_read (uint8_t itf, uint8_t packet[4]); - -// Write event packet (4 bytes) -bool tud_midi_n_packet_write (uint8_t itf, uint8_t const packet[4]); +uint32_t tud_midi_n_available(uint8_t itf, uint8_t cable_num); -//--------------------------------------------------------------------+ -// Application API (Single Interface) -//--------------------------------------------------------------------+ -static inline bool tud_midi_mounted (void); -static inline uint32_t tud_midi_available (void); - -static inline uint32_t tud_midi_stream_read (void* buffer, uint32_t bufsize); -static inline uint32_t tud_midi_stream_write (uint8_t cable_num, uint8_t const* buffer, uint32_t bufsize); - -static inline bool tud_midi_packet_read (uint8_t packet[4]); -static inline bool tud_midi_packet_write (uint8_t const packet[4]); - -//------------- Deprecated API name -------------// -// TODO remove after 0.10.0 release - -TU_ATTR_DEPRECATED("tud_midi_read() is renamed to tud_midi_stream_read()") -static inline uint32_t tud_midi_read (void* buffer, uint32_t bufsize) -{ - return tud_midi_stream_read(buffer, bufsize); -} +// Read byte stream (legacy) +uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void *buffer, uint32_t bufsize); -TU_ATTR_DEPRECATED("tud_midi_write() is renamed to tud_midi_stream_write()") -static inline uint32_t tud_midi_write(uint8_t cable_num, uint8_t const* buffer, uint32_t bufsize) -{ - return tud_midi_stream_write(cable_num, buffer, bufsize); -} +// Write byte Stream (legacy) +uint32_t tud_midi_n_stream_write(uint8_t itf, uint8_t cable_num, const uint8_t *buffer, uint32_t bufsize); +// Read an event 4-byte packet +bool tud_midi_n_packet_read(uint8_t itf, uint8_t packet[4]); -TU_ATTR_DEPRECATED("tud_midi_send() is renamed to tud_midi_packet_write()") -static inline bool tud_midi_send(uint8_t packet[4]) -{ - return tud_midi_packet_write(packet); -} +// Read multiple event packets, return number of read packets +uint32_t tud_midi_n_packet_read_n(uint8_t itf, uint8_t packets[], uint32_t max_packets); -TU_ATTR_DEPRECATED("tud_midi_receive() is renamed to tud_midi_packet_read()") -static inline bool tud_midi_receive(uint8_t packet[4]) -{ - return tud_midi_packet_read(packet); -} +// Write an event 4-byte packet +bool tud_midi_n_packet_write(uint8_t itf, const uint8_t packet[4]); -//--------------------------------------------------------------------+ -// Application Callback API (optional) -//--------------------------------------------------------------------+ -void tud_midi_rx_cb(uint8_t itf); +// Write multiple event packets, return number of written packets +uint32_t tud_midi_n_packet_write_n(uint8_t itf, const uint8_t packets[], uint32_t n_packets); //--------------------------------------------------------------------+ -// Inline Functions +// Application API (Single Interface) //--------------------------------------------------------------------+ - -static inline bool tud_midi_mounted (void) -{ +TU_ATTR_ALWAYS_INLINE static inline bool tud_midi_mounted(void) { return tud_midi_n_mounted(0); } -static inline uint32_t tud_midi_available (void) -{ +TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_midi_available(void) { return tud_midi_n_available(0, 0); } -static inline uint32_t tud_midi_stream_read (void* buffer, uint32_t bufsize) -{ +TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_midi_stream_read(void *buffer, uint32_t bufsize) { return tud_midi_n_stream_read(0, 0, buffer, bufsize); } -static inline uint32_t tud_midi_stream_write (uint8_t cable_num, uint8_t const* buffer, uint32_t bufsize) -{ +TU_ATTR_ALWAYS_INLINE static inline uint32_t +tud_midi_stream_write(uint8_t cable_num, const uint8_t *buffer, uint32_t bufsize) { return tud_midi_n_stream_write(0, cable_num, buffer, bufsize); } -static inline bool tud_midi_packet_read (uint8_t packet[4]) -{ +TU_ATTR_ALWAYS_INLINE static inline bool tud_midi_packet_read(uint8_t packet[4]) { return tud_midi_n_packet_read(0, packet); } -static inline bool tud_midi_packet_write (uint8_t const packet[4]) -{ +TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_midi_packet_read_n(uint8_t packets[], uint32_t max_packets) { + return tud_midi_n_packet_read_n(0, packets, max_packets); +} + +TU_ATTR_ALWAYS_INLINE static inline bool tud_midi_packet_write(const uint8_t packet[4]) { return tud_midi_n_packet_write(0, packet); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t tud_midi_packet_write_n(const uint8_t packets[], uint32_t n_packets) { + return tud_midi_n_packet_write_n(0, packets, n_packets); +} + //--------------------------------------------------------------------+ // Internal Class Driver API //--------------------------------------------------------------------+ -void midid_init (void); -bool midid_deinit (void); -void midid_reset (uint8_t rhport); -uint16_t midid_open (uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint16_t max_len); -bool midid_control_xfer_cb (uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); -bool midid_xfer_cb (uint8_t rhport, uint8_t edpt_addr, xfer_result_t result, uint32_t xferred_bytes); +void midid_init(void); +bool midid_deinit(void); +void midid_reset(uint8_t rhport); +uint16_t midid_open(uint8_t rhport, const tusb_desc_interface_t *itf_desc, uint16_t max_len); +bool midid_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_request_t *request); +bool midid_xfer_cb(uint8_t rhport, uint8_t edpt_addr, xfer_result_t result, uint32_t xferred_bytes); #ifdef __cplusplus - } +} #endif -#endif /* TUSB_MIDI_DEVICE_H_ */ - -/** @} */ -/** @} */ +#endif diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index 27724b194..c916ebe47 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -202,8 +202,9 @@ void vendord_reset(uint8_t rhport) { vendord_interface_t* p_itf = &_vendord_itf[i]; tu_memclr(p_itf, ITF_MEM_RESET_SIZE); tu_edpt_stream_clear(&p_itf->rx.stream); - tu_edpt_stream_clear(&p_itf->tx.stream); tu_edpt_stream_close(&p_itf->rx.stream); + + tu_edpt_stream_clear(&p_itf->tx.stream); tu_edpt_stream_close(&p_itf->tx.stream); } } diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 419046b8b..5c9e586fb 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -551,27 +551,10 @@ static uint16_t _tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n, tu_fifo_ @returns Number of items in FIFO */ /******************************************************************************/ -uint16_t tu_fifo_count(tu_fifo_t *f) { +uint16_t tu_fifo_count(const tu_fifo_t *f) { return tu_min16(_ff_count(f->depth, f->wr_idx, f->rd_idx), f->depth); } -/******************************************************************************/ -/*! - @brief Check if FIFO is empty. - - As this function only reads the read and write pointers once, this function is - reentrant and thus thread and ISR save without any mutexes. - - @param[in] f - Pointer to the FIFO buffer to manipulate - - @returns Number of items in FIFO - */ -/******************************************************************************/ -bool tu_fifo_empty(tu_fifo_t *f) { - return f->wr_idx == f->rd_idx; -} - /******************************************************************************/ /*! @brief Check if FIFO is full. @@ -585,7 +568,7 @@ bool tu_fifo_empty(tu_fifo_t *f) { @returns Number of items in FIFO */ /******************************************************************************/ -bool tu_fifo_full(tu_fifo_t *f) { +bool tu_fifo_full(const tu_fifo_t *f) { return _ff_count(f->depth, f->wr_idx, f->rd_idx) >= f->depth; } @@ -602,7 +585,7 @@ bool tu_fifo_full(tu_fifo_t *f) { @returns Number of items in FIFO */ /******************************************************************************/ -uint16_t tu_fifo_remaining(tu_fifo_t *f) { +uint16_t tu_fifo_remaining(const tu_fifo_t *f) { return _ff_remaining(f->depth, f->wr_idx, f->rd_idx); } @@ -627,7 +610,7 @@ uint16_t tu_fifo_remaining(tu_fifo_t *f) { @returns True if overflow happened */ /******************************************************************************/ -bool tu_fifo_overflowed(tu_fifo_t *f) { +bool tu_fifo_overflowed(const tu_fifo_t *f) { return _ff_count(f->depth, f->wr_idx, f->rd_idx) > f->depth; } diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 0f4ba00d8..9d8b864e9 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -155,33 +155,35 @@ void tu_fifo_config_mutex(tu_fifo_t *f, osal_mutex_t wr_mutex, osal_mutex_t rd_m #define tu_fifo_config_mutex(_f, _wr_mutex, _rd_mutex) #endif -bool tu_fifo_write (tu_fifo_t* f, void const * data); -uint16_t tu_fifo_write_n (tu_fifo_t* f, void const * data, uint16_t n); -#ifdef TUP_MEM_CONST_ADDR -uint16_t tu_fifo_write_n_const_addr_full_words (tu_fifo_t* f, const void * data, uint16_t n); -#endif +bool tu_fifo_write(tu_fifo_t *f, void const *data); +uint16_t tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n); + +bool tu_fifo_read(tu_fifo_t *f, void *buffer); +uint16_t tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n); -bool tu_fifo_read (tu_fifo_t* f, void * buffer); -uint16_t tu_fifo_read_n (tu_fifo_t* f, void * buffer, uint16_t n); #ifdef TUP_MEM_CONST_ADDR -uint16_t tu_fifo_read_n_const_addr_full_words (tu_fifo_t* f, void * buffer, uint16_t n); +uint16_t tu_fifo_write_n_const_addr_full_words(tu_fifo_t *f, const void *data, uint16_t n); +uint16_t tu_fifo_read_n_const_addr_full_words(tu_fifo_t *f, void *buffer, uint16_t n); #endif -bool tu_fifo_peek (tu_fifo_t* f, void * p_buffer); -uint16_t tu_fifo_peek_n (tu_fifo_t* f, void * p_buffer, uint16_t n); +bool tu_fifo_peek(tu_fifo_t *f, void *p_buffer); +uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n); -uint16_t tu_fifo_count (tu_fifo_t* f); -uint16_t tu_fifo_remaining (tu_fifo_t* f); -bool tu_fifo_empty (tu_fifo_t* f); -bool tu_fifo_full (tu_fifo_t* f); -bool tu_fifo_overflowed (tu_fifo_t* f); -void tu_fifo_correct_read_pointer (tu_fifo_t* f); +uint16_t tu_fifo_count(const tu_fifo_t *f); +uint16_t tu_fifo_remaining(const tu_fifo_t *f); +bool tu_fifo_full(const tu_fifo_t *f); +bool tu_fifo_overflowed(const tu_fifo_t *f); -TU_ATTR_ALWAYS_INLINE static inline -uint16_t tu_fifo_depth(tu_fifo_t* f) { +TU_ATTR_ALWAYS_INLINE static inline bool tu_fifo_empty(const tu_fifo_t *f) { + return f->wr_idx == f->rd_idx; +} + +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_fifo_depth(const tu_fifo_t *f) { return f->depth; } +void tu_fifo_correct_read_pointer(tu_fifo_t *f); + // Pointer modifications intended to be used in combinations with DMAs. // USE WITH CARE - NO SAFETY CHECKS CONDUCTED HERE! NOT MUTEX PROTECTED! void tu_fifo_advance_write_pointer(tu_fifo_t *f, uint16_t n); diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index dcd5c45d6..367209e57 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -105,6 +105,10 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_open(tu_edpt_stream_t* s s->is_mps512 = tu_edpt_packet_size(desc_ep) == 512; } +TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_is_opened(const tu_edpt_stream_t *s) { + return s->ep_addr != 0; +} + TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_close(tu_edpt_stream_t* s) { s->ep_addr = 0; } @@ -121,7 +125,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_clear(tu_edpt_stream_t* // Write to stream uint32_t tu_edpt_stream_write(uint8_t hwid, tu_edpt_stream_t* s, void const *buffer, uint32_t bufsize); -// Start an usb transfer if endpoint is not busy +// Start an usb transfer if endpoint is not busy. Return number of queued bytes uint32_t tu_edpt_stream_write_xfer(uint8_t hwid, tu_edpt_stream_t* s); // Start an zero-length packet if needed @@ -151,20 +155,18 @@ void tu_edpt_stream_read_xfer_complete(tu_edpt_stream_t* s, uint32_t xferred_byt // Complete read transfer with provided buffer TU_ATTR_ALWAYS_INLINE static inline -void tu_edpt_stream_read_xfer_complete_with_buf(tu_edpt_stream_t* s, const void * buf, uint32_t xferred_bytes) { +void tu_edpt_stream_read_xfer_complete_with_buf(tu_edpt_stream_t *s, const void *buf, uint32_t xferred_bytes) { if (0u != tu_fifo_depth(&s->ff)) { tu_fifo_write_n(&s->ff, buf, (uint16_t) xferred_bytes); } } // Get the number of bytes available for reading -TU_ATTR_ALWAYS_INLINE static inline -uint32_t tu_edpt_stream_read_available(tu_edpt_stream_t* s) { +TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_edpt_stream_read_available(const tu_edpt_stream_t *s) { return (uint32_t) tu_fifo_count(&s->ff); } -TU_ATTR_ALWAYS_INLINE static inline -bool tu_edpt_stream_peek(tu_edpt_stream_t* s, uint8_t* ch) { +TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_peek(tu_edpt_stream_t *s, uint8_t *ch) { return tu_fifo_peek(&s->ff, ch); } diff --git a/src/tusb.c b/src/tusb.c index 7411f19df..b308e2915 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -424,7 +424,7 @@ uint32_t tu_edpt_stream_write_xfer(uint8_t hwid, tu_edpt_stream_t* s) { TU_VERIFY(stream_claim(hwid, s), 0); // Pull data from FIFO -> EP buf - uint16_t const count = tu_fifo_read_n(&s->ff, s->ep_buf, s->ep_bufsize); + const uint16_t count = tu_fifo_read_n(&s->ff, s->ep_buf, s->ep_bufsize); if (count > 0) { TU_ASSERT(stream_xfer(hwid, s, count), 0); @@ -437,7 +437,7 @@ uint32_t tu_edpt_stream_write_xfer(uint8_t hwid, tu_edpt_stream_t* s) { } } -uint32_t tu_edpt_stream_write(uint8_t hwid, tu_edpt_stream_t* s, void const* buffer, uint32_t bufsize) { +uint32_t tu_edpt_stream_write(uint8_t hwid, tu_edpt_stream_t *s, const void *buffer, uint32_t bufsize) { TU_VERIFY(bufsize > 0); // TODO support ZLP if (0 == tu_fifo_depth(&s->ff)) { -- cgit v1.3.1 From f11adb02ebc0c594a7114b08585b8af18c3ee6d6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 12 Nov 2025 21:22:25 +0700 Subject: migrate cdc device to use edpt stream API tu_edpt_stream_open() does not clear fifo, allow for persistent stream when disconnect/reconnect --- .clang-format | 7 +- .../net_lwip_webserver/src/usb_descriptors.c | 2 +- src/class/cdc/cdc_device.c | 393 +++++++++------------ src/class/midi/midi_device.c | 2 + src/class/vendor/vendor_device.c | 16 +- src/common/tusb_private.h | 7 +- src/tusb.c | 8 +- 7 files changed, 194 insertions(+), 241 deletions(-) diff --git a/.clang-format b/.clang-format index c278fec37..40d40f7e9 100644 --- a/.clang-format +++ b/.clang-format @@ -1,7 +1,7 @@ --- Language: Cpp BasedOnStyle: LLVM -AlignAfterOpenBracket: AlwaysBreak +AlignAfterOpenBracket: Align AlignConsecutiveAssignments: Enabled: true AcrossEmptyLines: false @@ -38,6 +38,7 @@ AllowShortEnumsOnASingleLine: false AllowShortFunctionsOnASingleLine: None AllowShortIfStatementsOnASingleLine: Never AlwaysBreakTemplateDeclarations: Yes +BinPackArguments: true BreakBeforeBraces: Custom BraceWrapping: AfterCaseLabel: false @@ -57,8 +58,10 @@ BraceWrapping: SplitEmptyRecord: true SplitEmptyNamespace: true BracedInitializerIndentWidth: 2 +BreakBeforeBinaryOperators: None BreakConstructorInitializers: AfterColon BreakConstructorInitializersBeforeComma: false +ContinuationIndentWidth: 2 ColumnLimit: 120 ConstructorInitializerAllOnOneLineOrOnePerLine: false Cpp11BracedListStyle: true @@ -78,6 +81,8 @@ MacroBlockBegin: '' MacroBlockEnd: '' MaxEmptyLinesToKeep: 2 NamespaceIndentation: All +PenaltyBreakBeforeFirstCallParameter: 1000000 +PenaltyBreakOpenParenthesis: 1000000 QualifierAlignment: Custom QualifierOrder: ['static', 'const', 'volatile', 'restrict', 'type'] ReflowComments: false diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index b49962d65..c976cb62b 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -270,7 +270,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_contro switch (request->bmRequestType_bit.type) { case TUSB_REQ_TYPE_VENDOR: - switch (request->bRequest) { //-V2520 //-V2659 + switch (request->bRequest) { case 1: if (request->wIndex == 7) { // Get Microsoft OS 2.0 compatible descriptor diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index b3253b141..92139b14e 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -48,28 +48,23 @@ typedef struct { uint8_t rhport; uint8_t itf_num; - uint8_t ep_in; - uint8_t ep_out; - uint8_t ep_notify; uint8_t line_state; // Bit 0: DTR, Bit 1: RTS /*------------- From this point, data is not cleared by bus reset -------------*/ - char wanted_char; TU_ATTR_ALIGNED(4) cdc_line_coding_t line_coding; + char wanted_char; - // FIFO - tu_fifo_t rx_ff; - tu_fifo_t tx_ff; - - uint8_t rx_ff_buf[CFG_TUD_CDC_RX_BUFSIZE]; - uint8_t tx_ff_buf[CFG_TUD_CDC_TX_BUFSIZE]; + struct { + tu_edpt_stream_t tx; + tu_edpt_stream_t rx; - OSAL_MUTEX_DEF(rx_ff_mutex); - OSAL_MUTEX_DEF(tx_ff_mutex); + uint8_t tx_ff_buf[CFG_TUD_CDC_TX_BUFSIZE]; + uint8_t rx_ff_buf[CFG_TUD_CDC_RX_BUFSIZE]; + } stream; } cdcd_interface_t; -#define ITF_MEM_RESET_SIZE offsetof(cdcd_interface_t, wanted_char) +#define ITF_MEM_RESET_SIZE offsetof(cdcd_interface_t, line_coding) typedef struct { TUD_EPBUF_DEF(epout, CFG_TUD_CDC_EP_BUFSIZE); @@ -80,111 +75,102 @@ typedef struct { #endif } cdcd_epbuf_t; -//--------------------------------------------------------------------+ -// INTERNAL OBJECT & FUNCTION DECLARATION -//--------------------------------------------------------------------+ -static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; -CFG_TUD_MEM_SECTION static cdcd_epbuf_t _cdcd_epbuf[CFG_TUD_CDC]; - -static tud_cdc_configure_t _cdcd_cfg = TUD_CDC_CONFIGURE_DEFAULT(); - -static bool _prep_out_transaction(uint8_t itf) { - const uint8_t rhport = 0; - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; - - // Skip if usb is not ready yet - TU_VERIFY(tud_ready() && p_cdc->ep_out); - - uint16_t available = tu_fifo_remaining(&p_cdc->rx_ff); - - // Prepare for incoming data but only allow what we can store in the ring buffer. - // TODO Actually we can still carry out the transfer, keeping count of received bytes - // and slowly move it to the FIFO when read(). - // This pre-check reduces endpoint claiming - TU_VERIFY(available >= CFG_TUD_CDC_EP_BUFSIZE); - - // claim endpoint - TU_VERIFY(usbd_edpt_claim(p_cdc->rhport, p_cdc->ep_out)); - - // fifo can be changed before endpoint is claimed - available = tu_fifo_remaining(&p_cdc->rx_ff); - - if (available >= CFG_TUD_CDC_EP_BUFSIZE) { - return usbd_edpt_xfer(rhport, p_cdc->ep_out, p_epbuf->epout, CFG_TUD_CDC_EP_BUFSIZE); - } else { - // Release endpoint since we don't make any transfer - usbd_edpt_release(p_cdc->rhport, p_cdc->ep_out); - return false; - } -} - //--------------------------------------------------------------------+ // Weak stubs: invoked if no strong implementation is available //--------------------------------------------------------------------+ TU_ATTR_WEAK void tud_cdc_rx_cb(uint8_t itf) { - (void) itf; + (void)itf; } TU_ATTR_WEAK void tud_cdc_rx_wanted_cb(uint8_t itf, char wanted_char) { - (void) itf; - (void) wanted_char; + (void)itf; + (void)wanted_char; } TU_ATTR_WEAK void tud_cdc_tx_complete_cb(uint8_t itf) { - (void) itf; + (void)itf; } TU_ATTR_WEAK void tud_cdc_notify_complete_cb(uint8_t itf) { - (void) itf; + (void)itf; } TU_ATTR_WEAK void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { - (void) itf; - (void) dtr; - (void) rts; + (void)itf; + (void)dtr; + (void)rts; } -TU_ATTR_WEAK void tud_cdc_line_coding_cb(uint8_t itf, cdc_line_coding_t const* p_line_coding) { - (void) itf; - (void) p_line_coding; +TU_ATTR_WEAK void tud_cdc_line_coding_cb(uint8_t itf, const cdc_line_coding_t *p_line_coding) { + (void)itf; + (void)p_line_coding; } TU_ATTR_WEAK void tud_cdc_send_break_cb(uint8_t itf, uint16_t duration_ms) { - (void) itf; - (void) duration_ms; + (void)itf; + (void)duration_ms; +} + +//--------------------------------------------------------------------+ +// INTERNAL OBJECT & FUNCTION DECLARATION +//--------------------------------------------------------------------+ +static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; +CFG_TUD_MEM_SECTION static cdcd_epbuf_t _cdcd_epbuf[CFG_TUD_CDC]; +static tud_cdc_configure_t _cdcd_cfg = TUD_CDC_CONFIGURE_DEFAULT(); + +TU_ATTR_ALWAYS_INLINE static inline uint8_t find_cdc_itf(uint8_t ep_addr) { + for (uint8_t idx = 0; idx < CFG_TUD_CDC; idx++) { + const cdcd_interface_t *p_cdc = &_cdcd_itf[idx]; + if (ep_addr == p_cdc->stream.rx.ep_addr || ep_addr == p_cdc->stream.tx.ep_addr || + (ep_addr == p_cdc->ep_notify && ep_addr != 0)) { + return idx; + } + } + return TUSB_INDEX_INVALID_8; } //--------------------------------------------------------------------+ // APPLICATION API //--------------------------------------------------------------------+ bool tud_cdc_configure(const tud_cdc_configure_t* driver_cfg) { - TU_VERIFY(driver_cfg); + TU_VERIFY(driver_cfg != NULL); _cdcd_cfg = *driver_cfg; return true; } bool tud_cdc_n_ready(uint8_t itf) { - return tud_ready() && _cdcd_itf[itf].ep_in != 0 && _cdcd_itf[itf].ep_out != 0; + TU_VERIFY(itf < CFG_TUD_CDC); + TU_VERIFY(tud_ready()); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + + const bool in_opened = tu_edpt_stream_is_opened(&p_cdc->stream.tx); + const bool out_opened = tu_edpt_stream_is_opened(&p_cdc->stream.rx); + return in_opened && out_opened; } bool tud_cdc_n_connected(uint8_t itf) { + TU_VERIFY(itf < CFG_TUD_CDC); + TU_VERIFY(tud_ready()); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; // DTR (bit 0) active is considered as connected - return tud_ready() && tu_bit_test(_cdcd_itf[itf].line_state, 0); + return tu_bit_test(p_cdc->line_state, 0); } uint8_t tud_cdc_n_get_line_state(uint8_t itf) { + TU_VERIFY(itf < CFG_TUD_CDC, 0); return _cdcd_itf[itf].line_state; } -void tud_cdc_n_get_line_coding(uint8_t itf, cdc_line_coding_t* coding) { +void tud_cdc_n_get_line_coding(uint8_t itf, cdc_line_coding_t *coding) { + TU_VERIFY(itf < CFG_TUD_CDC, ); (*coding) = _cdcd_itf[itf].line_coding; } #if CFG_TUD_CDC_NOTIFY bool tud_cdc_n_notify_uart_state (uint8_t itf, const cdc_notify_uart_state_t *state) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; + TU_VERIFY(itf < CFG_TUD_CDC); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + cdcd_epbuf_t *p_epbuf = &_cdcd_epbuf[itf]; TU_VERIFY(tud_ready() && p_cdc->ep_notify != 0); TU_VERIFY(usbd_edpt_claim(p_cdc->rhport, p_cdc->ep_notify)); @@ -200,8 +186,9 @@ bool tud_cdc_n_notify_uart_state (uint8_t itf, const cdc_notify_uart_state_t *st } bool tud_cdc_n_notify_conn_speed_change(uint8_t itf, const cdc_notify_conn_speed_change_t* conn_speed_change) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; + TU_VERIFY(itf < CFG_TUD_CDC); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + cdcd_epbuf_t *p_epbuf = &_cdcd_epbuf[itf]; TU_VERIFY(tud_ready() && p_cdc->ep_notify != 0); TU_VERIFY(usbd_edpt_claim(p_cdc->rhport, p_cdc->ep_notify)); @@ -218,6 +205,7 @@ bool tud_cdc_n_notify_conn_speed_change(uint8_t itf, const cdc_notify_conn_speed #endif void tud_cdc_n_set_wanted_char(uint8_t itf, char wanted) { + TU_VERIFY(itf < CFG_TUD_CDC, ); _cdcd_itf[itf].wanted_char = wanted; } @@ -225,77 +213,55 @@ void tud_cdc_n_set_wanted_char(uint8_t itf, char wanted) { // READ API //--------------------------------------------------------------------+ uint32_t tud_cdc_n_available(uint8_t itf) { - return tu_fifo_count(&_cdcd_itf[itf].rx_ff); + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_read_available(&p_cdc->stream.rx); } uint32_t tud_cdc_n_read(uint8_t itf, void* buffer, uint32_t bufsize) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); - _prep_out_transaction(itf); - return num_read; + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_read(p_cdc->rhport, &p_cdc->stream.rx, buffer, bufsize); } -bool tud_cdc_n_peek(uint8_t itf, uint8_t* chr) { - return tu_fifo_peek(&_cdcd_itf[itf].rx_ff, chr); +bool tud_cdc_n_peek(uint8_t itf, uint8_t *chr) { + TU_VERIFY(itf < CFG_TUD_CDC); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_peek(&p_cdc->stream.rx, chr); } void tud_cdc_n_read_flush(uint8_t itf) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - tu_fifo_clear(&p_cdc->rx_ff); - _prep_out_transaction(itf); + TU_VERIFY(itf < CFG_TUD_CDC, ); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + tu_edpt_stream_clear(&p_cdc->stream.rx); + tu_edpt_stream_read_xfer(p_cdc->rhport, &p_cdc->stream.rx); } //--------------------------------------------------------------------+ // WRITE API //--------------------------------------------------------------------+ uint32_t tud_cdc_n_write(uint8_t itf, const void* buffer, uint32_t bufsize) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint16_t wr_count = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); - - // flush if queue more than packet size - if (tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE - #if CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE - || tu_fifo_full(&p_cdc->tx_ff) // check full if fifo size is less than packet size - #endif - ) { - tud_cdc_n_write_flush(itf); - } - - return wr_count; + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_write(p_cdc->rhport, &p_cdc->stream.tx, buffer, bufsize); } uint32_t tud_cdc_n_write_flush(uint8_t itf) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; - TU_VERIFY(tud_ready(), 0); // Skip if usb is not ready yet - - // No data to send - if (0 == tu_fifo_count(&p_cdc->tx_ff)) { - return 0; - } - - TU_VERIFY(usbd_edpt_claim(p_cdc->rhport, p_cdc->ep_in), 0); // Claim the endpoint - - // Pull data from FIFO - const uint16_t count = tu_fifo_read_n(&p_cdc->tx_ff, p_epbuf->epin, CFG_TUD_CDC_EP_BUFSIZE); - - if (count > 0) { - TU_ASSERT(usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_in, p_epbuf->epin, count), 0); - return count; - } else { - // Release endpoint since we don't make any transfer - // Note: data is dropped if terminal is not connected - usbd_edpt_release(p_cdc->rhport, p_cdc->ep_in); - return 0; - } + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_write_xfer(p_cdc->rhport, &p_cdc->stream.tx); } uint32_t tud_cdc_n_write_available(uint8_t itf) { - return tu_fifo_remaining(&_cdcd_itf[itf].tx_ff); + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_write_available(p_cdc->rhport, &p_cdc->stream.tx); } bool tud_cdc_n_write_clear(uint8_t itf) { - return tu_fifo_clear(&_cdcd_itf[itf].tx_ff); + TU_VERIFY(itf < CFG_TUD_CDC); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_clear(&p_cdc->stream.tx); } //--------------------------------------------------------------------+ @@ -304,7 +270,8 @@ bool tud_cdc_n_write_clear(uint8_t itf) { void cdcd_init(void) { tu_memclr(_cdcd_itf, sizeof(_cdcd_itf)); for (uint8_t i = 0; i < CFG_TUD_CDC; i++) { - cdcd_interface_t* p_cdc = &_cdcd_itf[i]; + cdcd_interface_t *p_cdc = &_cdcd_itf[i]; + cdcd_epbuf_t *p_epbuf = &_cdcd_epbuf[i]; p_cdc->wanted_char = (char) -1; @@ -314,44 +281,23 @@ void cdcd_init(void) { p_cdc->line_coding.parity = 0; p_cdc->line_coding.data_bits = 8; - // Config RX fifo - tu_fifo_config(&p_cdc->rx_ff, p_cdc->rx_ff_buf, TU_ARRAY_SIZE(p_cdc->rx_ff_buf), 1, false); + tu_edpt_stream_init(&p_cdc->stream.rx, false, false, false, p_cdc->stream.rx_ff_buf, CFG_TUD_CDC_RX_BUFSIZE, + p_epbuf->epout, CFG_TUD_CDC_EP_BUFSIZE); // TX fifo can be configured to change to overwritable if not connected (DTR bit not set). Without DTR we do not // know if data is actually polled by terminal. This way the most current data is prioritized. // Default: is overwritable - tu_fifo_config(&p_cdc->tx_ff, p_cdc->tx_ff_buf, TU_ARRAY_SIZE(p_cdc->tx_ff_buf), 1, _cdcd_cfg.tx_overwritabe_if_not_connected); - - #if OSAL_MUTEX_REQUIRED - osal_mutex_t mutex_rd = osal_mutex_create(&p_cdc->rx_ff_mutex); - osal_mutex_t mutex_wr = osal_mutex_create(&p_cdc->tx_ff_mutex); - TU_ASSERT(mutex_rd != NULL && mutex_wr != NULL, ); - - tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, mutex_rd); - tu_fifo_config_mutex(&p_cdc->tx_ff, mutex_wr, NULL); - #endif + tu_edpt_stream_init(&p_cdc->stream.tx, false, true, _cdcd_cfg.tx_overwritabe_if_not_connected, + p_cdc->stream.tx_ff_buf, CFG_TUD_CDC_TX_BUFSIZE, p_epbuf->epin, CFG_TUD_CDC_EP_BUFSIZE); } } bool cdcd_deinit(void) { - #if OSAL_MUTEX_REQUIRED for(uint8_t i=0; irx_ff.mutex_rd; - const osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; - - if (mutex_rd != NULL) { - osal_mutex_delete(mutex_rd); - tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, NULL); - } - - if (mutex_wr != NULL) { - osal_mutex_delete(mutex_wr); - tu_fifo_config_mutex(&p_cdc->tx_ff, NULL, NULL); - } + tu_edpt_stream_deinit(&p_cdc->stream.rx); + tu_edpt_stream_deinit(&p_cdc->stream.tx); } - #endif - return true; } @@ -360,74 +306,85 @@ void cdcd_reset(uint8_t rhport) { for (uint8_t i = 0; i < CFG_TUD_CDC; i++) { cdcd_interface_t* p_cdc = &_cdcd_itf[i]; - tu_memclr(p_cdc, ITF_MEM_RESET_SIZE); - if (!_cdcd_cfg.rx_persistent) { - tu_fifo_clear(&p_cdc->rx_ff); - } - if (!_cdcd_cfg.tx_persistent) { - tu_fifo_clear(&p_cdc->tx_ff); - } - tu_fifo_set_overwritable(&p_cdc->tx_ff, _cdcd_cfg.tx_overwritabe_if_not_connected); + + tu_fifo_set_overwritable(&p_cdc->stream.tx.ff, _cdcd_cfg.tx_overwritabe_if_not_connected); // // back to default + tu_edpt_stream_close(&p_cdc->stream.rx); + tu_edpt_stream_close(&p_cdc->stream.tx); } } uint16_t cdcd_open(uint8_t rhport, const tusb_desc_interface_t* itf_desc, uint16_t max_len) { // Only support ACM subclass - TU_VERIFY( TUSB_CLASS_CDC == itf_desc->bInterfaceClass && - CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL == itf_desc->bInterfaceSubClass, 0); + TU_VERIFY(TUSB_CLASS_CDC == itf_desc->bInterfaceClass && + CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL == itf_desc->bInterfaceSubClass, + 0); - // Find available interface - cdcd_interface_t* p_cdc; - uint8_t cdc_id; - for (cdc_id = 0; cdc_id < CFG_TUD_CDC; cdc_id++) { - p_cdc = &_cdcd_itf[cdc_id]; - if (p_cdc->ep_in == 0) { - break; - } - } + const uint8_t cdc_id = find_cdc_itf(0); // Find available interface TU_ASSERT(cdc_id < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[cdc_id]; //------------- Control Interface -------------// p_cdc->rhport = rhport; p_cdc->itf_num = itf_desc->bInterfaceNumber; - uint16_t drv_len = sizeof(tusb_desc_interface_t); - const uint8_t* p_desc = tu_desc_next(itf_desc); + const uint8_t *p_desc = (const uint8_t *)itf_desc; + const uint8_t *desc_end = p_desc + max_len; - // Communication Functional Descriptors - while (TUSB_DESC_CS_INTERFACE == tu_desc_type(p_desc) && drv_len <= max_len) { - drv_len += tu_desc_len(p_desc); + // Skip all class-specific descriptor + p_desc = tu_desc_next(itf_desc); + while (tu_desc_in_bounds(p_desc, desc_end) && TUSB_DESC_CS_INTERFACE == tu_desc_type(p_desc)) { p_desc = tu_desc_next(p_desc); } + // notification endpoint (optional) if (TUSB_DESC_ENDPOINT == tu_desc_type(p_desc)) { - // notification endpoint const tusb_desc_endpoint_t* desc_ep = (const tusb_desc_endpoint_t*) p_desc; TU_ASSERT(usbd_edpt_open(rhport, desc_ep), 0); p_cdc->ep_notify = desc_ep->bEndpointAddress; - drv_len += tu_desc_len(p_desc); p_desc = tu_desc_next(p_desc); } - //------------- Data Interface (if any) -------------// - if ((TUSB_DESC_INTERFACE == tu_desc_type(p_desc)) && - (TUSB_CLASS_CDC_DATA == ((const tusb_desc_interface_t*) p_desc)->bInterfaceClass)) { - // next to endpoint descriptor - drv_len += tu_desc_len(p_desc); - p_desc = tu_desc_next(p_desc); + //------------- Data Interface (optional) -------------// + if (TUSB_DESC_INTERFACE == tu_desc_type(p_desc)) { + const tusb_desc_interface_t *data_itf_desc = (const tusb_desc_interface_t *)p_desc; + if (TUSB_CLASS_CDC_DATA == data_itf_desc->bInterfaceClass) { + for (uint8_t e = 0; e < data_itf_desc->bNumEndpoints; e++) { + if (!tu_desc_in_bounds(p_desc, desc_end)) { + break; + } + p_desc = tu_desc_next(p_desc); - // Open endpoint pair - TU_ASSERT(usbd_open_edpt_pair(rhport, p_desc, 2, TUSB_XFER_BULK, &p_cdc->ep_out, &p_cdc->ep_in), 0); + const tusb_desc_endpoint_t *desc_ep = (const tusb_desc_endpoint_t *)p_desc; + TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType && TUSB_XFER_BULK == desc_ep->bmAttributes.xfer, 0); - drv_len += 2 * sizeof(tusb_desc_endpoint_t); - } + TU_ASSERT(usbd_edpt_open(rhport, desc_ep), 0); + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { + tu_edpt_stream_t *stream_tx = &p_cdc->stream.tx; + tu_edpt_stream_open(stream_tx, desc_ep); + + if (_cdcd_cfg.tx_persistent) { + tu_edpt_stream_write_xfer(rhport, stream_tx); // flush pending data + } else { + tu_edpt_stream_clear(stream_tx); + } + } else { + tu_edpt_stream_t *stream_rx = &p_cdc->stream.rx; - // Prepare for incoming data - _prep_out_transaction(cdc_id); + tu_edpt_stream_open(stream_rx, desc_ep); + if (!_cdcd_cfg.rx_persistent) { + tu_edpt_stream_clear(stream_rx); + } + TU_ASSERT(tu_edpt_stream_read_xfer(rhport, stream_rx) > 0, 0); // prepare for incoming data + } + } - return drv_len; + p_desc = tu_desc_next(p_desc); + } + } + + return p_desc - (const uint8_t *)itf_desc; } // Invoked when a control transfer occurred on an interface of this class @@ -449,7 +406,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } TU_VERIFY(itf < CFG_TUD_CDC); - switch (request->bRequest) { //-V2520 //-V2659 + switch (request->bRequest) { case CDC_REQUEST_SET_LINE_CODING: if (stage == CONTROL_STAGE_SETUP) { TU_LOG_DRV(" Set Line Coding\r\n"); @@ -484,15 +441,13 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ // If enabled: fifo overwriting is disabled if DTR bit is set and vice versa if (_cdcd_cfg.tx_overwritabe_if_not_connected) { - tu_fifo_set_overwritable(&p_cdc->tx_ff, !dtr); + tu_fifo_set_overwritable(&p_cdc->stream.tx.ff, !dtr); } else { - tu_fifo_set_overwritable(&p_cdc->tx_ff, false); + tu_fifo_set_overwritable(&p_cdc->stream.tx.ff, false); } TU_LOG_DRV(" Set Control Line State: DTR = %d, RTS = %d\r\n", dtr, rts); - - // Invoke callback - tud_cdc_line_state_cb(itf, dtr, rts); + tud_cdc_line_state_cb(itf, dtr, rts); // invoke callback } else { // nothing to do } @@ -507,7 +462,6 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } else { // nothing to do } - break; default: @@ -518,58 +472,45 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { - (void) result; + (void)result; - uint8_t itf; - cdcd_interface_t* p_cdc; - - // Identify which interface to use - for (itf = 0; itf < CFG_TUD_CDC; itf++) { - p_cdc = &_cdcd_itf[itf]; - if ((ep_addr == p_cdc->ep_out) || (ep_addr == p_cdc->ep_in) || (ep_addr == p_cdc->ep_notify)) { - break; - } - } + uint8_t itf = find_cdc_itf(ep_addr); TU_ASSERT(itf < CFG_TUD_CDC); - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + tu_edpt_stream_t *stream_rx = &p_cdc->stream.rx; + tu_edpt_stream_t *stream_tx = &p_cdc->stream.tx; - // Received new data - if (ep_addr == p_cdc->ep_out) { - tu_fifo_write_n(&p_cdc->rx_ff, p_epbuf->epout, (uint16_t) xferred_bytes); + // Received new data, move to fifo + if (ep_addr == stream_rx->ep_addr) { + tu_edpt_stream_read_xfer_complete(stream_rx, xferred_bytes); - // Check for wanted char and invoke callback if needed - if (((signed char) p_cdc->wanted_char) != -1) { + // Check for wanted char and invoke wanted callback (multiple times if multiple wanted received) + if (((signed char)p_cdc->wanted_char) != -1) { for (uint32_t i = 0; i < xferred_bytes; i++) { - if ((p_cdc->wanted_char == (char) p_epbuf->epout[i]) && !tu_fifo_empty(&p_cdc->rx_ff)) { + if ((p_cdc->wanted_char == (char)stream_rx->ep_buf[i]) && !tu_edpt_stream_empty(stream_rx)) { tud_cdc_rx_wanted_cb(itf, p_cdc->wanted_char); } } } - // invoke receive callback (if there is still data) - if (!tu_fifo_empty(&p_cdc->rx_ff)) { + // invoke receive callback if there is still data + if (!tu_edpt_stream_empty(stream_rx)) { tud_cdc_rx_cb(itf); } - // prepare for OUT transaction - _prep_out_transaction(itf); + tu_edpt_stream_read_xfer(rhport, stream_rx); // prepare for more data } // Data sent to host, we continue to fetch from tx fifo to send. // Note: This will cause incorrect baudrate set in line coding. // Though maybe the baudrate is not really important !!! - if (ep_addr == p_cdc->ep_in) { + if (ep_addr == stream_tx->ep_addr) { // invoke transmit callback to possibly refill tx fifo tud_cdc_tx_complete_cb(itf); - if (0 == tud_cdc_n_write_flush(itf)) { - // If there is no data left, a ZLP should be sent if - // xferred_bytes is multiple of EP Packet size and not zero - if (0 == tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes > 0 && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { - if (usbd_edpt_claim(rhport, p_cdc->ep_in)) { - TU_ASSERT(usbd_edpt_xfer(rhport, p_cdc->ep_in, NULL, 0)); - } - } + if (0 == tu_edpt_stream_write_xfer(rhport, stream_tx)) { + // If there is no data left, a ZLP should be sent if needed + tu_edpt_stream_write_zlp_if_needed(rhport, stream_tx, xferred_bytes); } } diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index f065e486a..79e7dfa71 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -405,8 +405,10 @@ uint16_t midid_open(uint8_t rhport, const tusb_desc_interface_t *desc_itf, uint1 if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { tu_edpt_stream_open(&p_midi->ep_stream.tx, desc_ep); + tu_edpt_stream_clear(&p_midi->ep_stream.tx); } else { tu_edpt_stream_open(&p_midi->ep_stream.rx, desc_ep); + tu_edpt_stream_clear(&p_midi->ep_stream.rx); TU_ASSERT(tu_edpt_stream_read_xfer(rhport, &p_midi->ep_stream.rx) > 0, 0); // prepare to receive data } diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index c916ebe47..7da4d2239 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -234,16 +234,18 @@ uint16_t vendord_open(uint8_t rhport, const tusb_desc_interface_t* desc_itf, uin const tusb_desc_endpoint_t* desc_ep = (const tusb_desc_endpoint_t*) p_desc; TU_ASSERT(usbd_edpt_open(rhport, desc_ep)); - // open endpoint stream, skip if already opened + // open endpoint stream, skip if already opened (multiple IN/OUT endpoints) if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { - if (p_vendor->tx.stream.ep_addr == 0) { - tu_edpt_stream_open(&p_vendor->tx.stream, desc_ep); - tud_vendor_n_write_flush(itf); + tu_edpt_stream_t *stream_tx = &p_vendor->tx.stream; + if (stream_tx->ep_addr == 0) { + tu_edpt_stream_open(stream_tx, desc_ep); + tu_edpt_stream_write_xfer(rhport, stream_tx); // flush pending data } } else { - if (p_vendor->rx.stream.ep_addr == 0) { - tu_edpt_stream_open(&p_vendor->rx.stream, desc_ep); - TU_ASSERT(tu_edpt_stream_read_xfer(rhport, &p_vendor->rx.stream) > 0, 0); // prepare for incoming data + tu_edpt_stream_t *stream_rx = &p_vendor->rx.stream; + if (stream_rx->ep_addr == 0) { + tu_edpt_stream_open(stream_rx, desc_ep); + TU_ASSERT(tu_edpt_stream_read_xfer(rhport, stream_rx) > 0, 0); // prepare for incoming data } } } diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 367209e57..f82f87b6f 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -100,7 +100,6 @@ bool tu_edpt_stream_deinit(tu_edpt_stream_t* s); // Open an stream for an endpoint TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_open(tu_edpt_stream_t* s, tusb_desc_endpoint_t const *desc_ep) { - tu_fifo_clear(&s->ff); s->ep_addr = desc_ep->bEndpointAddress; s->is_mps512 = tu_edpt_packet_size(desc_ep) == 512; } @@ -113,11 +112,15 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_close(tu_edpt_stream_t* s->ep_addr = 0; } -// Clear fifo TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_clear(tu_edpt_stream_t* s) { return tu_fifo_clear(&s->ff); } +TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_empty(tu_edpt_stream_t *s) { + return tu_fifo_empty(&s->ff); +} + + //--------------------------------------------------------------------+ // Stream Write //--------------------------------------------------------------------+ diff --git a/src/tusb.c b/src/tusb.c index b308e2915..df33f2680 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -354,8 +354,8 @@ bool tu_edpt_stream_init(tu_edpt_stream_t* s, bool is_host, bool is_tx, bool ove return true; } -bool tu_edpt_stream_deinit(tu_edpt_stream_t* s) { - (void) s; +bool tu_edpt_stream_deinit(tu_edpt_stream_t *s) { + (void)s; #if OSAL_MUTEX_REQUIRED if (s->ff.mutex_wr) { osal_mutex_delete(s->ff.mutex_wr); @@ -363,7 +363,7 @@ bool tu_edpt_stream_deinit(tu_edpt_stream_t* s) { if (s->ff.mutex_rd) { osal_mutex_delete(s->ff.mutex_rd); } -#endif + #endif return true; } @@ -412,7 +412,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool stream_release(uint8_t hwid, tu_edpt_st bool tu_edpt_stream_write_zlp_if_needed(uint8_t hwid, tu_edpt_stream_t* s, uint32_t last_xferred_bytes) { // ZLP condition: no pending data, last transferred bytes is multiple of packet size const uint16_t mps = s->is_mps512 ? TUSB_EPSIZE_BULK_HS : TUSB_EPSIZE_BULK_FS; - TU_VERIFY(!tu_fifo_count(&s->ff) && last_xferred_bytes > 0 && (0 == (last_xferred_bytes & (mps - 1)))); + TU_VERIFY(tu_fifo_empty(&s->ff) && last_xferred_bytes > 0 && (0 == (last_xferred_bytes & (mps - 1)))); TU_VERIFY(stream_claim(hwid, s)); TU_ASSERT(stream_xfer(hwid, s, 0)); return true; -- cgit v1.3.1 From 397a3af8afc4bc5460572da4a40629684dfa788c Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 13 Nov 2025 12:02:02 +0700 Subject: clear endpoint stream when open for cdc_host and midi_host --- src/class/cdc/cdc_device.c | 15 ++++++------- src/class/cdc/cdc_host.c | 50 ++++++++++++++++++-------------------------- src/class/midi/midi_device.c | 14 +++++++------ src/class/midi/midi_host.c | 48 ++++++++++++++++++++++-------------------- src/common/tusb_common.h | 2 +- src/common/tusb_private.h | 1 - src/tusb.c | 2 +- 7 files changed, 61 insertions(+), 71 deletions(-) diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 92139b14e..80fa81d99 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -141,7 +141,7 @@ bool tud_cdc_configure(const tud_cdc_configure_t* driver_cfg) { bool tud_cdc_n_ready(uint8_t itf) { TU_VERIFY(itf < CFG_TUD_CDC); TU_VERIFY(tud_ready()); - cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + const cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; const bool in_opened = tu_edpt_stream_is_opened(&p_cdc->stream.tx); const bool out_opened = tu_edpt_stream_is_opened(&p_cdc->stream.rx); @@ -151,9 +151,8 @@ bool tud_cdc_n_ready(uint8_t itf) { bool tud_cdc_n_connected(uint8_t itf) { TU_VERIFY(itf < CFG_TUD_CDC); TU_VERIFY(tud_ready()); - cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; // DTR (bit 0) active is considered as connected - return tu_bit_test(p_cdc->line_state, 0); + return tu_bit_test(_cdcd_itf[itf].line_state, 0); } uint8_t tud_cdc_n_get_line_state(uint8_t itf) { @@ -214,8 +213,7 @@ void tud_cdc_n_set_wanted_char(uint8_t itf, char wanted) { //--------------------------------------------------------------------+ uint32_t tud_cdc_n_available(uint8_t itf) { TU_VERIFY(itf < CFG_TUD_CDC, 0); - cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; - return tu_edpt_stream_read_available(&p_cdc->stream.rx); + return tu_edpt_stream_read_available(&_cdcd_itf[itf].stream.rx); } uint32_t tud_cdc_n_read(uint8_t itf, void* buffer, uint32_t bufsize) { @@ -226,8 +224,7 @@ uint32_t tud_cdc_n_read(uint8_t itf, void* buffer, uint32_t bufsize) { bool tud_cdc_n_peek(uint8_t itf, uint8_t *chr) { TU_VERIFY(itf < CFG_TUD_CDC); - cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; - return tu_edpt_stream_peek(&p_cdc->stream.rx, chr); + return tu_edpt_stream_peek(&_cdcd_itf[itf].stream.rx, chr); } void tud_cdc_n_read_flush(uint8_t itf) { @@ -362,8 +359,8 @@ uint16_t cdcd_open(uint8_t rhport, const tusb_desc_interface_t* itf_desc, uint16 TU_ASSERT(usbd_edpt_open(rhport, desc_ep), 0); if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { tu_edpt_stream_t *stream_tx = &p_cdc->stream.tx; - tu_edpt_stream_open(stream_tx, desc_ep); + tu_edpt_stream_open(stream_tx, desc_ep); if (_cdcd_cfg.tx_persistent) { tu_edpt_stream_write_xfer(rhport, stream_tx); // flush pending data } else { @@ -384,7 +381,7 @@ uint16_t cdcd_open(uint8_t rhport, const tusb_desc_interface_t* itf_desc, uint16 } } - return p_desc - (const uint8_t *)itf_desc; + return (uint16_t)(p_desc - (const uint8_t *)itf_desc); } // Invoked when a control transfer occurred on an interface of this class diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 7fdf0a7b9..35717ddf6 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -298,6 +298,7 @@ TU_VERIFY_STATIC(TU_ARRAY_SIZE(serial_drivers) == SERIAL_DRIVER_COUNT, "Serial d //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ +static bool open_ep_stream_pair(cdch_interface_t *p_cdc, const tusb_desc_endpoint_t *desc_ep); TU_ATTR_ALWAYS_INLINE static inline cdch_interface_t * get_itf(uint8_t idx) { TU_ASSERT(idx < CFG_TUH_CDC, NULL); @@ -364,7 +365,7 @@ static cdch_interface_t* get_itf_by_xfer(const tuh_xfer_t * xfer) { #endif default: - break; + break; // unknown driver } } } @@ -389,8 +390,6 @@ static cdch_interface_t * make_new_itf(uint8_t daddr, tusb_desc_interface_t cons return NULL; } -static bool open_ep_stream_pair(cdch_interface_t * p_cdc , tusb_desc_endpoint_t const *desc_ep); - //--------------------------------------------------------------------+ // Weak stubs: invoked if no strong implementation is available //--------------------------------------------------------------------+ @@ -519,7 +518,7 @@ bool tuh_cdc_read_clear (uint8_t idx) { TU_VERIFY(p_cdc); bool ret = tu_edpt_stream_clear(&p_cdc->stream.rx); - tu_edpt_stream_read_xfer(p_cdc->daddr, &p_cdc->stream.rx); + (void)tu_edpt_stream_read_xfer(p_cdc->daddr, &p_cdc->stream.rx); return ret; } @@ -648,13 +647,10 @@ bool cdch_init(void) { for (size_t i = 0; i < CFG_TUH_CDC; i++) { cdch_interface_t *p_cdc = &cdch_data[i]; cdch_epbuf_t *epbuf = &cdch_epbuf[i]; - tu_edpt_stream_init(&p_cdc->stream.tx, true, true, false, - p_cdc->stream.tx_ff_buf, CFG_TUH_CDC_TX_BUFSIZE, - epbuf->tx, CFG_TUH_CDC_TX_EPSIZE); - - tu_edpt_stream_init(&p_cdc->stream.rx, true, false, false, - p_cdc->stream.rx_ff_buf, CFG_TUH_CDC_RX_BUFSIZE, - epbuf->rx, CFG_TUH_CDC_RX_EPSIZE); + TU_ASSERT(tu_edpt_stream_init(&p_cdc->stream.tx, true, true, false, p_cdc->stream.tx_ff_buf, CFG_TUH_CDC_TX_BUFSIZE, + epbuf->tx, CFG_TUH_CDC_TX_EPSIZE)); + TU_ASSERT(tu_edpt_stream_init(&p_cdc->stream.rx, true, false, false, p_cdc->stream.rx_ff_buf, + CFG_TUH_CDC_RX_BUFSIZE, epbuf->rx, CFG_TUH_CDC_RX_EPSIZE)); } return true; @@ -663,8 +659,8 @@ bool cdch_init(void) { bool cdch_deinit(void) { for (size_t i = 0; i < CFG_TUH_CDC; i++) { cdch_interface_t *p_cdc = &cdch_data[i]; - tu_edpt_stream_deinit(&p_cdc->stream.tx); - tu_edpt_stream_deinit(&p_cdc->stream.rx); + (void)tu_edpt_stream_deinit(&p_cdc->stream.tx); + (void)tu_edpt_stream_deinit(&p_cdc->stream.rx); } return true; } @@ -674,11 +670,9 @@ void cdch_close(uint8_t daddr) { cdch_interface_t *p_cdc = &cdch_data[idx]; if (p_cdc->daddr == daddr) { TU_LOG_CDC(p_cdc, "close"); + tuh_cdc_umount_cb(idx); // invoke callback - // Invoke application callback - tuh_cdc_umount_cb(idx); - - p_cdc->daddr = 0; + p_cdc->daddr = 0; p_cdc->bInterfaceNumber = 0; p_cdc->mounted = false; tu_edpt_stream_close(&p_cdc->stream.tx); @@ -696,13 +690,12 @@ bool cdch_xfer_cb(uint8_t daddr, uint8_t ep_addr, xfer_result_t event, uint32_t TU_ASSERT(p_cdc); if (ep_addr == p_cdc->stream.tx.ep_addr) { - // invoke tx complete callback to possibly refill tx fifo - tuh_cdc_tx_complete_cb(idx); + tuh_cdc_tx_complete_cb(idx); // invoke transmit complete callback if (0 == tu_edpt_stream_write_xfer(daddr, &p_cdc->stream.tx)) { // If there is no data left, a ZLP should be sent if: // - xferred_bytes is multiple of EP Packet size and not zero - tu_edpt_stream_write_zlp_if_needed(daddr, &p_cdc->stream.tx, xferred_bytes); + (void)tu_edpt_stream_write_zlp_if_needed(daddr, &p_cdc->stream.tx, xferred_bytes); } } else if (ep_addr == p_cdc->stream.rx.ep_addr) { #if CFG_TUH_CDC_FTDI @@ -718,7 +711,6 @@ bool cdch_xfer_cb(uint8_t daddr, uint8_t ep_addr, xfer_result_t event, uint32_t #endif { tu_edpt_stream_read_xfer_complete(&p_cdc->stream.rx, xferred_bytes); - tuh_cdc_rx_cb(idx); // invoke receive callback } @@ -727,7 +719,7 @@ bool cdch_xfer_cb(uint8_t daddr, uint8_t ep_addr, xfer_result_t event, uint32_t } else if (ep_addr == p_cdc->ep_notif) { // TODO handle notification endpoint } else { - TU_ASSERT(false); + return false; } return true; @@ -736,20 +728,17 @@ bool cdch_xfer_cb(uint8_t daddr, uint8_t ep_addr, xfer_result_t event, uint32_t //--------------------------------------------------------------------+ // Enumeration //--------------------------------------------------------------------+ - static bool open_ep_stream_pair(cdch_interface_t *p_cdc, tusb_desc_endpoint_t const *desc_ep) { for (size_t i = 0; i < 2; i++) { TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType && TUSB_XFER_BULK == desc_ep->bmAttributes.xfer); TU_ASSERT(tuh_edpt_open(p_cdc->daddr, desc_ep)); + tu_edpt_stream_t *stream = + (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) ? &p_cdc->stream.rx : &p_cdc->stream.tx; + tu_edpt_stream_open(stream, desc_ep); + tu_edpt_stream_clear(stream); - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { - tu_edpt_stream_open(&p_cdc->stream.rx, desc_ep); - } else { - tu_edpt_stream_open(&p_cdc->stream.tx, desc_ep); - } - - desc_ep = (tusb_desc_endpoint_t const *) tu_desc_next(desc_ep); + desc_ep = (const tusb_desc_endpoint_t *)tu_desc_next(desc_ep); } return true; @@ -832,6 +821,7 @@ static void cdch_process_set_config(tuh_xfer_t *xfer) { } } +// return false if there is no active transfer static bool set_line_state_on_enum(cdch_interface_t *p_cdc, tuh_xfer_t *xfer) { enum { ENUM_SET_LINE_CODING = 0, diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index 79e7dfa71..b20903d68 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -404,15 +404,17 @@ uint16_t midid_open(uint8_t rhport, const tusb_desc_interface_t *desc_itf, uint1 const uint8_t ep_addr = ((const tusb_desc_endpoint_t *)p_desc)->bEndpointAddress; if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { - tu_edpt_stream_open(&p_midi->ep_stream.tx, desc_ep); - tu_edpt_stream_clear(&p_midi->ep_stream.tx); + tu_edpt_stream_t *stream_tx = &p_midi->ep_stream.tx; + tu_edpt_stream_open(stream_tx, desc_ep); + tu_edpt_stream_clear(stream_tx); } else { - tu_edpt_stream_open(&p_midi->ep_stream.rx, desc_ep); - tu_edpt_stream_clear(&p_midi->ep_stream.rx); - TU_ASSERT(tu_edpt_stream_read_xfer(rhport, &p_midi->ep_stream.rx) > 0, 0); // prepare to receive data + tu_edpt_stream_t *stream_rx = &p_midi->ep_stream.rx; + tu_edpt_stream_open(stream_rx, desc_ep); + tu_edpt_stream_clear(stream_rx); + TU_ASSERT(tu_edpt_stream_read_xfer(rhport, stream_rx) > 0, 0); // prepare to receive data } - p_desc = tu_desc_next(p_desc); // skip CS Endpoint descriptor + p_desc = tu_desc_next(p_desc); // skip CS Endpoint descriptor found_ep++; } diff --git a/src/class/midi/midi_host.c b/src/class/midi/midi_host.c index 8b78fe945..07062875c 100644 --- a/src/class/midi/midi_host.c +++ b/src/class/midi/midi_host.c @@ -59,9 +59,6 @@ typedef struct { uint8_t iInterface; uint8_t itf_count; // number of interface including Audio Control + MIDI streaming - uint8_t ep_in; // IN endpoint address - uint8_t ep_out; // OUT endpoint address - uint8_t rx_cable_count; // IN endpoint CS descriptor bNumEmbMIDIJack value uint8_t tx_cable_count; // OUT endpoint CS descriptor bNumEmbMIDIJack value @@ -147,8 +144,6 @@ void midih_close(uint8_t daddr) { TU_LOG_DRV(" MIDI close addr = %u index = %u\r\n", daddr, idx); tuh_midi_umount_cb(idx); - p_midi->ep_in = 0; - p_midi->ep_out = 0; p_midi->bInterfaceNumber = 0; p_midi->rx_cable_count = 0; p_midi->tx_cable_count = 0; @@ -169,23 +164,25 @@ bool midih_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint const uint8_t idx = get_idx_by_ep_addr(dev_addr, ep_addr); TU_VERIFY(idx < CFG_TUH_MIDI); midih_interface_t *p_midi = &_midi_host[idx]; + tu_edpt_stream_t *ep_str_rx = &p_midi->ep_stream.rx; + tu_edpt_stream_t *ep_str_tx = &p_midi->ep_stream.tx; - if (ep_addr == p_midi->ep_stream.rx.ep_addr) { + if (ep_addr == ep_str_rx->ep_addr) { // receive new data, put it into FIFO and invoke callback if available // Note: some devices send back all zero packets even if there is no data ready - if (xferred_bytes && !tu_mem_is_zero(p_midi->ep_stream.rx.ep_buf, xferred_bytes)) { - tu_edpt_stream_read_xfer_complete(&p_midi->ep_stream.rx, xferred_bytes); + if (xferred_bytes && !tu_mem_is_zero(ep_str_rx->ep_buf, xferred_bytes)) { + tu_edpt_stream_read_xfer_complete(ep_str_rx, xferred_bytes); tuh_midi_rx_cb(idx, xferred_bytes); } - tu_edpt_stream_read_xfer(dev_addr, &p_midi->ep_stream.rx); // prepare for next transfer - } else if (ep_addr == p_midi->ep_stream.tx.ep_addr) { + tu_edpt_stream_read_xfer(dev_addr, ep_str_rx); // prepare for next transfer + } else if (ep_addr == ep_str_tx->ep_addr) { tuh_midi_tx_cb(idx, xferred_bytes); - if (0 == tu_edpt_stream_write_xfer(dev_addr, &p_midi->ep_stream.tx)) { + if (0 == tu_edpt_stream_write_xfer(dev_addr, ep_str_tx)) { // If there is no data left, a ZLP should be sent if // xferred_bytes is multiple of EP size and not zero - tu_edpt_stream_write_zlp_if_needed(dev_addr, &p_midi->ep_stream.tx, xferred_bytes); + tu_edpt_stream_write_zlp_if_needed(dev_addr, ep_str_tx, xferred_bytes); } } @@ -295,21 +292,20 @@ bool midih_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *d const midi_desc_cs_endpoint_t *p_csep = (const midi_desc_cs_endpoint_t *) p_desc; TU_LOG_DRV(" Endpoint and CS_Endpoint descriptor %02x\r\n", p_ep->bEndpointAddress); + tu_edpt_stream_t *ep_stream; if (tu_edpt_dir(p_ep->bEndpointAddress) == TUSB_DIR_OUT) { - p_midi->ep_out = p_ep->bEndpointAddress; p_midi->tx_cable_count = p_csep->bNumEmbMIDIJack; desc_cb.desc_epout = p_ep; - - TU_ASSERT(tuh_edpt_open(dev_addr, p_ep)); - tu_edpt_stream_open(&p_midi->ep_stream.tx, p_ep); + ep_stream = &p_midi->ep_stream.tx; } else { - p_midi->ep_in = p_ep->bEndpointAddress; p_midi->rx_cable_count = p_csep->bNumEmbMIDIJack; - desc_cb.desc_epin = p_ep; - - TU_ASSERT(tuh_edpt_open(dev_addr, p_ep)); - tu_edpt_stream_open(&p_midi->ep_stream.rx, p_ep); + desc_cb.desc_epin = p_ep; + ep_stream = &p_midi->ep_stream.rx; } + TU_ASSERT(tuh_edpt_open(dev_addr, p_ep)); + tu_edpt_stream_open(ep_stream, p_ep); + tu_edpt_stream_clear(ep_stream); + break; } @@ -379,8 +375,14 @@ bool tuh_midi_itf_get_info(uint8_t idx, tuh_itf_info_t* info) { desc->bDescriptorType = TUSB_DESC_INTERFACE; desc->bInterfaceNumber = p_midi->bInterfaceNumber; - desc->bAlternateSetting = 0; - desc->bNumEndpoints = (uint8_t)((p_midi->ep_in != 0 ? 1:0) + (p_midi->ep_out != 0 ? 1:0)); + desc->bAlternateSetting = 0; + desc->bNumEndpoints = 0; + if (tu_edpt_stream_is_opened(&p_midi->ep_stream.tx)) { + desc->bNumEndpoints++; + } + if (tu_edpt_stream_is_opened(&p_midi->ep_stream.rx)) { + desc->bNumEndpoints++; + } desc->bInterfaceClass = TUSB_CLASS_AUDIO; desc->bInterfaceSubClass = AUDIO_SUBCLASS_MIDI_STREAMING; desc->bInterfaceProtocol = 0; diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 7aa42a2d7..f377d5272 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -354,7 +354,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_subtype(void const* desc) { return ((uint8_t const*) desc)[DESC_OFFSET_SUBTYPE]; } -TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_in_bounds(uint8_t const* p_desc, uint8_t const* desc_end) { +TU_ATTR_ALWAYS_INLINE static inline bool tu_desc_in_bounds(const uint8_t *p_desc, const uint8_t *desc_end) { if (p_desc >= desc_end) { return false; } diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index f82f87b6f..be1264a71 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -120,7 +120,6 @@ TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_empty(tu_edpt_stream_t * return tu_fifo_empty(&s->ff); } - //--------------------------------------------------------------------+ // Stream Write //--------------------------------------------------------------------+ diff --git a/src/tusb.c b/src/tusb.c index df33f2680..6fb5309ab 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -517,7 +517,7 @@ uint32_t tu_edpt_stream_read_xfer(uint8_t hwid, tu_edpt_stream_t* s) { } uint32_t tu_edpt_stream_read(uint8_t hwid, tu_edpt_stream_t* s, void* buffer, uint32_t bufsize) { - uint32_t num_read = tu_fifo_read_n(&s->ff, buffer, (uint16_t) bufsize); + const uint32_t num_read = tu_fifo_read_n(&s->ff, buffer, (uint16_t)bufsize); tu_edpt_stream_read_xfer(hwid, s); return num_read; } -- cgit v1.3.1 From 2b07fa6e6a5376b6a9d1c4dd39b61a96cd9e0138 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Thu, 13 Nov 2025 12:47:36 +0700 Subject: Apply suggestions from code review Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --- src/class/cdc/cdc_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 80fa81d99..babb89952 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -290,7 +290,7 @@ void cdcd_init(void) { } bool cdcd_deinit(void) { - for(uint8_t i=0; istream.rx); tu_edpt_stream_deinit(&p_cdc->stream.tx); @@ -305,7 +305,7 @@ void cdcd_reset(uint8_t rhport) { cdcd_interface_t* p_cdc = &_cdcd_itf[i]; tu_memclr(p_cdc, ITF_MEM_RESET_SIZE); - tu_fifo_set_overwritable(&p_cdc->stream.tx.ff, _cdcd_cfg.tx_overwritabe_if_not_connected); // // back to default + tu_fifo_set_overwritable(&p_cdc->stream.tx.ff, _cdcd_cfg.tx_overwritabe_if_not_connected); // back to default tu_edpt_stream_close(&p_cdc->stream.rx); tu_edpt_stream_close(&p_cdc->stream.tx); } -- cgit v1.3.1 From aac7ad1eb682a86a5b67e638f9b91a5c2743d2f1 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 13 Nov 2025 13:56:02 +0700 Subject: cdc device tx_persistent for dual host info to help with hil test --- .clang-format | 1 + examples/dual/host_info_to_device_cdc/src/main.c | 10 +++------- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/.clang-format b/.clang-format index 40d40f7e9..f15c26c9e 100644 --- a/.clang-format +++ b/.clang-format @@ -65,6 +65,7 @@ ContinuationIndentWidth: 2 ColumnLimit: 120 ConstructorInitializerAllOnOneLineOrOnePerLine: false Cpp11BracedListStyle: true +IncludeBlocks: Preserve IncludeCategories: - Regex: '^<.*' Priority: 1 diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 03a1ac3d8..46e1d1ab2 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -106,6 +106,9 @@ static void usb_device_init(void) { .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUD_RHPORT, &dev_init); + tud_cdc_configure_t cdc_cfg = TUD_CDC_CONFIGURE_DEFAULT(); + cdc_cfg.tx_persistent = true; + tud_cdc_configure(&cdc_cfg); board_init_after_tusb(); } @@ -206,13 +209,6 @@ void tud_resume_cb(void) { } void cdc_task(void) { - if (!tud_cdc_connected()) { - // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. - // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop - tusb_time_delay_ms_api(20); - return; - } - for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { if (tuh_mounted(daddr)) { if (is_print[daddr]) { -- cgit v1.3.1 From c9a9e94ae554c3d545b5eb795f81fa9216a93e4f Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 13 Nov 2025 14:34:17 +0700 Subject: tweak to dual host info device cdc to make it easier to pass hil test --- examples/dual/host_info_to_device_cdc/src/main.c | 24 +++++++++++++++++----- .../dual/host_info_to_device_cdc/src/tusb_config.h | 2 +- 2 files changed, 20 insertions(+), 6 deletions(-) diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 46e1d1ab2..00d059b66 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -69,7 +69,7 @@ enum { static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; -static bool is_print[CFG_TUH_DEVICE_MAX+1] = { 0 }; +static bool is_printable[CFG_TUH_DEVICE_MAX + 1] = {0}; static tusb_desc_device_t descriptor_device[CFG_TUH_DEVICE_MAX+1]; static void print_utf16(uint16_t *temp_buf, size_t buf_len); @@ -108,6 +108,7 @@ static void usb_device_init(void) { tusb_init(BOARD_TUD_RHPORT, &dev_init); tud_cdc_configure_t cdc_cfg = TUD_CDC_CONFIGURE_DEFAULT(); cdc_cfg.tx_persistent = true; + cdc_cfg.tx_overwritabe_if_not_connected = false; tud_cdc_configure(&cdc_cfg); board_init_after_tusb(); } @@ -209,10 +210,23 @@ void tud_resume_cb(void) { } void cdc_task(void) { + static uint32_t connected_ms = 0; + + if (!tud_cdc_connected()) { + connected_ms = board_millis(); + return; + } + + // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. + // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop + if (board_millis() - connected_ms < 100) { + return; // wait for stable connection + } + for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { if (tuh_mounted(daddr)) { - if (is_print[daddr]) { - is_print[daddr] = false; + if (is_printable[daddr]) { + is_printable[daddr] = false; print_device_info(daddr, &descriptor_device[daddr]); tud_cdc_write_flush(); } @@ -279,13 +293,13 @@ void tuh_enum_descriptor_device_cb(uint8_t daddr, tusb_desc_device_t const* desc void tuh_mount_cb(uint8_t daddr) { cdc_printf("mounted device %u\r\n", daddr); tud_cdc_write_flush(); - is_print[daddr] = true; + is_printable[daddr] = true; } void tuh_umount_cb(uint8_t daddr) { cdc_printf("unmounted device %u\r\n", daddr); tud_cdc_write_flush(); - is_print[daddr] = false; + is_printable[daddr] = false; } //--------------------------------------------------------------------+ diff --git a/examples/dual/host_info_to_device_cdc/src/tusb_config.h b/examples/dual/host_info_to_device_cdc/src/tusb_config.h index bb47fbf4a..601c27dae 100644 --- a/examples/dual/host_info_to_device_cdc/src/tusb_config.h +++ b/examples/dual/host_info_to_device_cdc/src/tusb_config.h @@ -112,7 +112,7 @@ // CDC FIFO size of TX and RX #define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) -#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 256) // CDC Endpoint transfer buffer size, more is faster #define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) -- cgit v1.3.1 From 6b28a4478c9f8fa3993d593360eb5574bbdeda22 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 15 Nov 2025 19:46:14 +0700 Subject: make TUP_DCD_EDPT_ISO_ALLOC i.e dcd_edpt_iso_alloc()/dcd_edpt_iso_activate() as default driver implementation. dcd_edpt_close() is deprecated and will be removed from all driver in the future. --- docs/porting.rst | 10 + src/common/tusb_mcu.h | 335 ++++++++++++----------- src/device/dcd.h | 11 +- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 15 +- src/portable/chipidea/ci_fs/dcd_ci_fs.c | 18 +- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 196 +++++++------ src/portable/dialog/da146xx/dcd_da146xx.c | 16 +- src/portable/microchip/pic/dcd_pic.c | 16 +- src/portable/microchip/pic32mz/dcd_pic32mz.c | 13 +- src/portable/microchip/samd/dcd_samd.c | 11 +- src/portable/microchip/samg/dcd_samg.c | 15 +- src/portable/microchip/samx7x/dcd_samx7x.c | 17 +- src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c | 299 ++++++++++---------- src/portable/nordic/nrf5x/dcd_nrf5x.c | 16 +- src/portable/nxp/khci/dcd_khci.c | 16 +- src/portable/nxp/lpc17_40/dcd_lpc17_40.c | 15 +- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 16 +- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 14 +- src/portable/renesas/rusb2/dcd_rusb2.c | 16 +- src/portable/sunxi/dcd_sunxi_musb.c | 16 +- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 16 +- src/portable/valentyusb/eptri/dcd_eptri.c | 15 +- src/portable/wch/dcd_ch32_usbfs.c | 13 +- src/portable/wch/dcd_ch32_usbhs.c | 27 +- 24 files changed, 702 insertions(+), 450 deletions(-) diff --git a/docs/porting.rst b/docs/porting.rst index c3076354c..9b60ec5a2 100644 --- a/docs/porting.rst +++ b/docs/porting.rst @@ -173,12 +173,22 @@ Also make sure to enable endpoint specific interrupts. ``dcd_edpt_close()`` """""""""""""""""""" +.. warning:: + This function is deprecated, ISO transfer should implement dcd_edpt_iso_alloc() and dcd_edpt_iso_activate() instead. + Close an endpoint. his function is used for implementing alternate settings. After calling this, the device should not respond to any packets directed towards this endpoint. When called, this function must abort any transfers in progress through this endpoint, before returning. Implementation is optional. Must be called from the USB task. Interrupts could be disabled or enabled during the call. +``dcd_edpt_iso_alloc() / dcd_edpt_iso_activate()`` +"""""""""""""""""""""""""""""""""""""""""""""""""" + +dcd_edpt_iso_alloc() is used to allocate largest buffer (for all alternative interfaces) for ISO endpoints when device is enumerated. This allows DCD to allocate necessary resources for ISO endpoints in the future. + +dcd_edpt_iso_activate() is used to activate or deactivate ISO endpoint when alternate setting is set with active max packet size. + ``dcd_edpt_xfer()`` """"""""""""""""""" diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index fd922ee56..05ae6929c 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -37,14 +37,14 @@ #ifdef __ARM_ARCH // ARM Architecture set __ARM_FEATURE_UNALIGNED to 1 for mcu supports unaligned access #if defined(__ARM_FEATURE_UNALIGNED) && __ARM_FEATURE_UNALIGNED == 1 - #define TUP_ARCH_STRICT_ALIGN 0 + #define TUP_ARCH_STRICT_ALIGN 0 #else - #define TUP_ARCH_STRICT_ALIGN 1 + #define TUP_ARCH_STRICT_ALIGN 1 #endif #else // TODO default to strict align for others // Should investigate other architecture such as risv, xtensa, mips for optimal setting - #define TUP_ARCH_STRICT_ALIGN 1 + #define TUP_ARCH_STRICT_ALIGN 1 #endif /* USB Controller Attributes for Device, Host or MCU (both) @@ -57,41 +57,41 @@ //--------------------------------------------------------------------+ // NXP //--------------------------------------------------------------------+ -#if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) +#if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) #define TUP_USBIP_IP3511 - #define TUP_DCD_ENDPOINT_MAX 5 + #define TUP_DCD_ENDPOINT_MAX 5 #elif TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 #define TUP_USBIP_OHCI #define TUP_USBIP_OHCI_NXP - #define TUP_OHCI_RHPORTS 2 + #define TUP_OHCI_RHPORTS 2 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX) - #define TUP_USBIP_IP3511 - #define TUP_DCD_ENDPOINT_MAX 5 + #define TUP_USBIP_IP3511 + #define TUP_DCD_ENDPOINT_MAX 5 #elif TU_CHECK_MCU(OPT_MCU_LPC54) // TODO USB0 has 5, USB1 has 6 #define TUP_USBIP_IP3511 - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_LPC55) // TODO USB0 has 5, USB1 has 6 #define TUP_USBIP_IP3511 #define TUP_USBIP_OHCI #define TUP_USBIP_OHCI_NXP - #define TUP_OHCI_RHPORTS 1 // 1 downstream port + #define TUP_OHCI_RHPORTS 1 // 1 downstream port - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) // USB0 has 6 with HS PHY, USB1 has 4 only FS #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI - #define TUP_DCD_ENDPOINT_MAX 6 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_MCXN9) // USB0 is chipidea FS @@ -102,15 +102,15 @@ #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_MCXA15) // USB0 is chipidea FS #define TUP_USBIP_CHIPIDEA_FS #define TUP_USBIP_CHIPIDEA_FS_MCX - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 #elif TU_CHECK_MCU(OPT_MCU_MIMXRT1XXX) #include "fsl_device_registers.h" @@ -118,60 +118,61 @@ #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 #if __CORTEX_M == 7 - #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT 1 - #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT 1 - #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT 1 + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT 1 + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 #endif #elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32L, OPT_MCU_KINETIS_K) #define TUP_USBIP_CHIPIDEA_FS #define TUP_USBIP_CHIPIDEA_FS_KINETIS - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 #elif TU_CHECK_MCU(OPT_MCU_MM32F327X) - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_EDPT_CLOSE_API //--------------------------------------------------------------------+ // Nordic //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_NRF5X) // 8 CBI + 1 ISO - #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_EDPT_CLOSE_API #elif TU_CHECK_MCU(OPT_MCU_NRF54) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_NRF - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 //--------------------------------------------------------------------+ // Microchip //--------------------------------------------------------------------+ -#elif TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML2X, OPT_MCU_SAMD21) || \ - TU_CHECK_MCU(OPT_MCU_SAMD51, OPT_MCU_SAME5X) - #define TUP_DCD_ENDPOINT_MAX 8 +#elif TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML2X, OPT_MCU_SAMD21) || TU_CHECK_MCU(OPT_MCU_SAMD51, OPT_MCU_SAME5X) + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_SAMG) - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY #elif TU_CHECK_MCU(OPT_MCU_SAMX7X) - #define TUP_DCD_ENDPOINT_MAX 10 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 10 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY #elif TU_CHECK_MCU(OPT_MCU_PIC32MZ) - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY -#elif TU_CHECK_MCU(OPT_MCU_PIC32MX, OPT_MCU_PIC32MM, OPT_MCU_PIC32MK) || \ - TU_CHECK_MCU(OPT_MCU_PIC24, OPT_MCU_DSPIC33) - #define TUP_DCD_ENDPOINT_MAX 16 +#elif TU_CHECK_MCU(OPT_MCU_PIC32MX, OPT_MCU_PIC32MM, OPT_MCU_PIC32MK) || TU_CHECK_MCU(OPT_MCU_PIC24, OPT_MCU_DSPIC33) + #define TUP_DCD_ENDPOINT_MAX 16 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY + #define TUP_DCD_EDPT_CLOSE_API //--------------------------------------------------------------------+ // ST @@ -179,23 +180,23 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32F1) // - F102, F103 use fsdev // - F105, F107 use dwc2 - #if defined (STM32F105x8) || defined (STM32F105xB) || defined (STM32F105xC) || \ - defined (STM32F107xB) || defined (STM32F107xC) + #if defined(STM32F105x8) || defined(STM32F105xB) || defined(STM32F105xC) || defined(STM32F107xB) || \ + defined(STM32F107xC) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 - #define TUP_DCD_ENDPOINT_MAX 4 - #elif defined(STM32F102x6) || defined(STM32F102xB) || \ - defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) + #define TUP_DCD_ENDPOINT_MAX 4 + #elif defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || \ + defined(STM32F103xE) || defined(STM32F103xG) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #else #error "Unsupported STM32F1 mcu" #endif @@ -205,55 +206,55 @@ #define TUP_USBIP_DWC2_STM32 // FS has 4 ep, HS has 5 ep - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_STM32F3) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32F4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 // For most mcu, FS has 4, HS has 6. TODO 446/469/479 HS has 9 - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_STM32F7) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 // FS has 6, HS has 9 - #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_ENDPOINT_MAX 9 // MCU with on-chip HS Phy #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx) - #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS + #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS #endif // Enable dcache if DMA is enabled - #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE - #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 #elif TU_CHECK_MCU(OPT_MCU_STM32H7) #include "stm32h7xx.h" #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_ENDPOINT_MAX 9 #if __CORTEX_M == 7 // Enable dcache if DMA is enabled - #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE - #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 #endif #elif TU_CHECK_MCU(OPT_MCU_STM32H5) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32G4) // Device controller @@ -262,41 +263,40 @@ // TypeC controller #define TUP_USBIP_TYPEC_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #define TUP_TYPEC_RHPORTS_NUM 1 #elif TU_CHECK_MCU(OPT_MCU_STM32G0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32C0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32L0, OPT_MCU_STM32L1) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32L4) // - L4x2, L4x3 use fsdev // - L4x4, L4x6, L4x7, L4x9 use dwc2 - #if defined (STM32L475xx) || defined (STM32L476xx) || \ - defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || \ - defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || \ - defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + #if defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || \ + defined(STM32L496xx) || defined(STM32L4A6xx) || defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || \ + defined(STM32L4S7xx) || defined(STM32L4S9xx) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif defined(STM32L412xx) || defined(STM32L422xx) || defined(STM32L432xx) || defined(STM32L433xx) || \ - defined(STM32L442xx) || defined(STM32L443xx) || defined(STM32L452xx) || defined(STM32L462xx) + defined(STM32L442xx) || defined(STM32L443xx) || defined(STM32L452xx) || defined(STM32L462xx) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #else #error "Unsupported STM32L4 mcu" #endif @@ -304,19 +304,19 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32WB) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32WBA) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_DCD_ENDPOINT_MAX 9 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_STM32U5) - #if defined (STM32U535xx) || defined (STM32U545xx) + #if defined(STM32U535xx) || defined(STM32U545xx) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #else #define TUP_USBIP_DWC2 @@ -324,38 +324,38 @@ // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ - defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) - #define TUP_DCD_ENDPOINT_MAX 9 - #define TUP_RHPORT_HIGHSPEED 1 + defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_RHPORT_HIGHSPEED 1 #else - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #endif #endif #elif TU_CHECK_MCU(OPT_MCU_STM32L5) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32U0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32U3) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32H7RS, OPT_MCU_STM32N6) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 // FS has 6, HS has 9 - #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_ENDPOINT_MAX 9 // MCU with on-chip HS Phy - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_RHPORT_HIGHSPEED 1 // Enable dcache if DMA is enabled #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE @@ -366,43 +366,39 @@ // Sony //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_CXD56) - #define TUP_DCD_ENDPOINT_MAX 7 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 7 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY - #define TUP_DCD_EDPT_ISO_ALLOC //--------------------------------------------------------------------+ // TI //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_MSP430x5xx) - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_MSP432E4, OPT_MCU_TM4C123, OPT_MCU_TM4C129) #define TUP_USBIP_MUSB #define TUP_USBIP_MUSB_TI - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 //--------------------------------------------------------------------+ // ValentyUSB (Litex) //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_VALENTYUSB_EPTRI) - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 //--------------------------------------------------------------------+ // Nuvoton //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_NUC121, OPT_MCU_NUC126) - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_DCD_EDPT_ISO_ALLOC + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_NUC120) - #define TUP_DCD_ENDPOINT_MAX 6 - #define TUP_DCD_EDPT_ISO_ALLOC + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_NUC505) - #define TUP_DCD_ENDPOINT_MAX 12 - #define TUP_RHPORT_HIGHSPEED 1 - #define TUP_DCD_EDPT_ISO_ALLOC + #define TUP_DCD_ENDPOINT_MAX 12 + #define TUP_RHPORT_HIGHSPEED 1 //--------------------------------------------------------------------+ // Espressif @@ -410,114 +406,124 @@ #elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_ESP32 - #define TUP_DCD_ENDPOINT_MAX 7 // only 5 TX FIFO for endpoint IN - #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + #define TUP_DCD_ENDPOINT_MAX 7 // only 5 TX FIFO for endpoint IN + + // clang-format off + #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + // clang-format on #if CFG_TUSB_MCU == OPT_MCU_ESP32S3 #define TUP_MCU_MULTIPLE_CORE 1 #endif // Disable slave if DMA is enabled - #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE #elif TU_CHECK_MCU(OPT_MCU_ESP32P4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_ESP32 - #define TUP_RHPORT_HIGHSPEED 1 // port0 FS, port1 HS - #define TUP_DCD_ENDPOINT_MAX 16 // FS 7 ep, HS 16 ep + #define TUP_RHPORT_HIGHSPEED 1 // port0 FS, port1 HS + #define TUP_DCD_ENDPOINT_MAX 16 // FS 7 ep, HS 16 ep - #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + // clang-format off + #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + // clang-format on - #define TUP_MCU_MULTIPLE_CORE 1 + #define TUP_MCU_MULTIPLE_CORE 1 // Disable slave if DMA is enabled - #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE // Enable dcache if DMA is enabled - #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE - #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 64 + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 64 -#elif TU_CHECK_MCU(OPT_MCU_ESP32, OPT_MCU_ESP32C2, OPT_MCU_ESP32C3, OPT_MCU_ESP32C5, OPT_MCU_ESP32C6, OPT_MCU_ESP32C61, OPT_MCU_ESP32H2) +#elif TU_CHECK_MCU(OPT_MCU_ESP32, OPT_MCU_ESP32C2, OPT_MCU_ESP32C3, OPT_MCU_ESP32C5, OPT_MCU_ESP32C6, \ + OPT_MCU_ESP32C61, OPT_MCU_ESP32H2) #if (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) - #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" + #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" #endif - #define TUP_DCD_ENDPOINT_MAX 0 - #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + #define TUP_DCD_ENDPOINT_MAX 0 + + // clang-format off + #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + // clang-format on + //--------------------------------------------------------------------+ // Dialog //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_DA1469X) - #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_EDPT_CLOSE_API //--------------------------------------------------------------------+ // Raspberry Pi //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_RP2040) - #define TUP_DCD_EDPT_ISO_ALLOC - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_MCU_MULTIPLE_CORE 1 + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_MCU_MULTIPLE_CORE 1 - #define TU_ATTR_FAST_FUNC __not_in_flash("tinyusb") + #define TU_ATTR_FAST_FUNC __not_in_flash("tinyusb") //--------------------------------------------------------------------+ // Silabs //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_EFM32GG) #define TUP_USBIP_DWC2 - #define TUP_DCD_ENDPOINT_MAX 7 + #define TUP_DCD_ENDPOINT_MAX 7 //--------------------------------------------------------------------+ // Renesas //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N, OPT_MCU_RAXXX) #define TUP_USBIP_RUSB2 - #define TUP_DCD_ENDPOINT_MAX 10 + #define TUP_DCD_ENDPOINT_MAX 10 //--------------------------------------------------------------------+ // GigaDevice //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_GD32VF103) #define TUP_USBIP_DWC2 - #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_ENDPOINT_MAX 4 //--------------------------------------------------------------------+ // Broadcom //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) #define TUP_USBIP_DWC2 - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 //--------------------------------------------------------------------+ // Infineon //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_XMC4000) #define TUP_USBIP_DWC2 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 //--------------------------------------------------------------------+ // BridgeTek //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_FT90X) - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY #elif TU_CHECK_MCU(OPT_MCU_FT93X) - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY //--------------------------------------------------------------------+ // Allwinner //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_F1C100S) - #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_ENDPOINT_MAX 4 //--------------------------------------------------------------------+ // WCH @@ -527,31 +533,31 @@ #define TUP_USBIP_WCH_USBFS #if !defined(CFG_TUD_WCH_USBIP_USBFS) - #define CFG_TUD_WCH_USBIP_USBFS 0 + #define CFG_TUD_WCH_USBIP_USBFS 0 #endif #if !defined(CFG_TUD_WCH_USBIP_USBHS) - #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) #endif - #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS - #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32V103) #define TUP_USBIP_WCH_USBFS #if !defined(CFG_TUD_WCH_USBIP_USBFS) - #define CFG_TUD_WCH_USBIP_USBFS 1 + #define CFG_TUD_WCH_USBIP_USBFS 1 #endif - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) // v20x support both port0 FSDEV (USBD) and port1 USBFS #define TUP_USBIP_WCH_USBFS #ifndef CFG_TUH_WCH_USBIP_USBFS - #define CFG_TUH_WCH_USBIP_USBFS 1 + #define CFG_TUH_WCH_USBIP_USBFS 1 #endif #define TUP_USBIP_FSDEV @@ -559,14 +565,14 @@ // default to FSDEV for device #if !defined(CFG_TUD_WCH_USBIP_USBFS) - #define CFG_TUD_WCH_USBIP_USBFS 0 + #define CFG_TUD_WCH_USBIP_USBFS 0 #endif #if !defined(CFG_TUD_WCH_USBIP_FSDEV) - #define CFG_TUD_WCH_USBIP_FSDEV (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #define CFG_TUD_WCH_USBIP_FSDEV (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) #endif - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_CH32V307) // v307 support both FS and HS, default to HS @@ -574,15 +580,15 @@ #define TUP_USBIP_WCH_USBFS #if !defined(CFG_TUD_WCH_USBIP_USBFS) - #define CFG_TUD_WCH_USBIP_USBFS 0 + #define CFG_TUD_WCH_USBIP_USBFS 0 #endif #if !defined(CFG_TUD_WCH_USBIP_USBHS) - #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) #endif - #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS - #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) //--------------------------------------------------------------------+ // Analog Devices @@ -590,8 +596,8 @@ #elif TU_CHECK_MCU(OPT_MCU_MAX32650, OPT_MCU_MAX32666, OPT_MCU_MAX32690, OPT_MCU_MAX78002) #define TUP_USBIP_MUSB #define TUP_USBIP_MUSB_ADI - #define TUP_DCD_ENDPOINT_MAX 12 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 12 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY //--------------------------------------------------------------------+ @@ -600,46 +606,44 @@ #elif TU_CHECK_MCU(OPT_MCU_AT32F403A_407) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_AT32F413) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_AT32F415) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_ENDPOINT_MAX 4 #elif TU_CHECK_MCU(OPT_MCU_AT32F435_437) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_AT32F423) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_AT32F402_405) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 // AT32F405xx has on-chip HS PHY - #if defined(AT32F405CBT7) || defined(AT32F405CBU7) || \ - defined(AT32F405CCT7) || defined(AT32F405CCU7) || \ - defined(AT32F405KBU7_4) || defined(AT32F405KCU7_4) || \ - defined(AT32F405RBT7_7) || defined(AT32F405RBT7) || \ - defined(AT32F405RCT7_7) || defined(AT32F405RCT7) - #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS + #if defined(AT32F405CBT7) || defined(AT32F405CBU7) || defined(AT32F405CCT7) || defined(AT32F405CCU7) || \ + defined(AT32F405KBU7_4) || defined(AT32F405KCU7_4) || defined(AT32F405RBT7_7) || defined(AT32F405RBT7) || \ + defined(AT32F405RCT7_7) || defined(AT32F405RCT7) + #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS #endif #elif TU_CHECK_MCU(OPT_MCU_AT32F425) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #endif @@ -649,7 +653,7 @@ #if defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 #ifndef CFG_TUH_MAX3421_ENDPOINT_TOTAL - #define CFG_TUH_MAX3421_ENDPOINT_TOTAL (8 + 4*(CFG_TUH_DEVICE_MAX-1)) + #define CFG_TUH_MAX3421_ENDPOINT_TOTAL (8 + 4 * (CFG_TUH_DEVICE_MAX - 1)) #endif #endif @@ -659,17 +663,17 @@ //--------------------------------------------------------------------+ #ifndef TUP_MCU_MULTIPLE_CORE -#define TUP_MCU_MULTIPLE_CORE 0 + #define TUP_MCU_MULTIPLE_CORE 0 #endif #if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #endif // Default to fullspeed if not defined #ifndef TUP_RHPORT_HIGHSPEED - #define TUP_RHPORT_HIGHSPEED 0 + #define TUP_RHPORT_HIGHSPEED 0 #endif // fast function, normally mean placing function in SRAM @@ -677,8 +681,13 @@ #define TU_ATTR_FAST_FUNC #endif -// USBIP that support ISO alloc & activate API -#if defined(TUP_USBIP_DWC2) || defined(TUP_USBIP_FSDEV) || defined(TUP_USBIP_MUSB) +#if defined(TUP_USBIP_CHIPIDEA_FS) || defined(TUP_USBIP_IP3511) || defined(TUP_USBIP_RUSB2) || \ + (defined(TUP_USBIP_WCH_USBFS) && CFG_TUD_WCH_USBIP_USBFS) + #define TUP_DCD_EDPT_CLOSE_API +#endif + +// USBIP implement dcd_edpt_close() and does not support ISO alloc & activate API +#ifndef TUP_DCD_EDPT_CLOSE_API #define TUP_DCD_EDPT_ISO_ALLOC #endif diff --git a/src/device/dcd.h b/src/device/dcd.h index 1b0289280..353f836ee 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -171,7 +171,12 @@ void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr); // This API never calls with control endpoints, since it is auto cleared when receiving setup packet void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr); -#ifdef TUP_DCD_EDPT_ISO_ALLOC +#ifdef TUP_DCD_EDPT_CLOSE_API +// Close an endpoint. +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr); + +#else + // Allocate packet buffer used by ISO endpoints // Some MCU need manual packet buffer allocation, we allocate the largest size to avoid clustering bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size); @@ -179,10 +184,6 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet // Configure and enable an ISO endpoint according to descriptor bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep); -#else -// Close an endpoint. -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr); - #endif //--------------------------------------------------------------------+ diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 34a8be3b6..6ed4be410 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -806,6 +806,20 @@ void dcd_edpt_close_all(uint8_t rhport) _ft9xx_reset_edpts(); } +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + + // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { @@ -1200,5 +1214,4 @@ void ft9xx_usbd_pm_ISR(void) } } } - #endif diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 11ddb683f..8b5c42aa2 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -399,6 +399,7 @@ void dcd_edpt_close_all(uint8_t rhport) } } +#ifdef TUP_DCD_EDPT_CLOSE_API void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { const unsigned epn = tu_edpt_number(ep_addr); @@ -419,6 +420,22 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) dcd_int_enable(rhport); } +#else + +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { const unsigned epn = tu_edpt_number(ep_addr); @@ -564,5 +581,4 @@ void dcd_int_handler(uint8_t rhport) process_tokdne(rhport); } } - #endif diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 244f5a2d4..8c5253eb9 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -64,16 +64,19 @@ bool dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { //--------------------------------------------------------------------+ // ENDPTCTRL +enum { + ENDPTCTRL_TYPE_POS = 2, // Endpoint type is 2-bit field +}; + enum { ENDPTCTRL_STALL = TU_BIT(0), ENDPTCTRL_TOGGLE_INHIBIT = TU_BIT(5), // used for test only ENDPTCTRL_TOGGLE_RESET = TU_BIT(6), - ENDPTCTRL_ENABLE = TU_BIT(7) + ENDPTCTRL_ENABLE = TU_BIT(7), }; -enum { - ENDPTCTRL_TYPE_POS = 2, // Endpoint type is 2-bit field -}; +#define ENDPTCTRL_TYPE(_type) ((_type) << ENDPTCTRL_TYPE_POS) + #define ENDPTCTRL_RESET_MASK (ENDPTCTRL_TYPE(TUSB_XFER_BULK) | (ENDPTCTRL_TYPE(TUSB_XFER_BULK) << 16u)) // USBSTS, USBINTR enum { @@ -170,9 +173,7 @@ static dcd_data_t _dcd_data; // Prototypes and Helper Functions //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE -static inline uint8_t ci_ep_count(ci_hs_regs_t const* dcd_reg) -{ +TU_ATTR_ALWAYS_INLINE static inline uint8_t ci_ep_count(const ci_hs_regs_t *dcd_reg) { return dcd_reg->DCCPARAMS & DCCPARAMS_DEN_MASK; } @@ -191,9 +192,8 @@ static void bus_reset(uint8_t rhport) // type (e.g. bulk). Leaving an un-configured endpoint control will cause undefined behavior // for the data PID tracking on the active endpoint. uint8_t const ep_count = ci_ep_count(dcd_reg); - for( uint8_t i=1; i < ep_count; i++) - { - dcd_reg->ENDPTCTRL[i] = (TUSB_XFER_BULK << ENDPTCTRL_TYPE_POS) | (TUSB_XFER_BULK << (16+ENDPTCTRL_TYPE_POS)); + for (uint8_t i = 1; i < ep_count; i++) { + dcd_reg->ENDPTCTRL[i] = ENDPTCTRL_RESET_MASK; } //------------- Clear All Registers -------------// @@ -315,26 +315,25 @@ void dcd_sof_enable(uint8_t rhport, bool en) // HELPER //--------------------------------------------------------------------+ -static void qtd_init(dcd_qtd_t* p_qtd, void * data_ptr, uint16_t total_bytes) -{ - dcd_dcache_clean_invalidate((uint32_t*) tu_align((uint32_t) data_ptr, 4), total_bytes); +static void qtd_init(dcd_qtd_t *p_qtd, void *data_ptr, uint16_t total_bytes) { + dcd_dcache_clean_invalidate((uint32_t *)tu_align((uint32_t)data_ptr, 4), total_bytes); tu_memclr(p_qtd, sizeof(dcd_qtd_t)); - p_qtd->next = QTD_NEXT_INVALID; - p_qtd->active = 1; - p_qtd->total_bytes = p_qtd->expected_bytes = total_bytes; - p_qtd->int_on_complete = true; + p_qtd->next = QTD_NEXT_INVALID; + p_qtd->active = 1; + p_qtd->total_bytes = p_qtd->expected_bytes = total_bytes; + p_qtd->int_on_complete = true; - if (data_ptr != NULL) - { - p_qtd->buffer[0] = (uint32_t) data_ptr; + if (data_ptr != NULL) { + p_qtd->buffer[0] = (uint32_t)data_ptr; - uint32_t const bufend = p_qtd->buffer[0] + total_bytes; - for(uint8_t i=1; i<5; i++) - { - uint32_t const next_page = tu_align4k( p_qtd->buffer[i-1] ) + 4096; - if ( bufend <= next_page ) break; + const uint32_t bufend = p_qtd->buffer[0] + total_bytes; + for (uint8_t i = 1; i < 5; i++) { + const uint32_t next_page = tu_align4k(p_qtd->buffer[i - 1]) + 4096; + if (bufend <= next_page) { + break; + } p_qtd->buffer[i] = next_page; @@ -346,6 +345,35 @@ static void qtd_init(dcd_qtd_t* p_qtd, void * data_ptr, uint16_t total_bytes) //--------------------------------------------------------------------+ // DCD Endpoint Port //--------------------------------------------------------------------+ +TU_ATTR_ALWAYS_INLINE static inline void ep_ctrl_write(volatile uint32_t *epctrl, uint8_t dir, uint32_t value) { + if (dir == TUSB_DIR_OUT) { + *epctrl = (*epctrl & 0xFFFF0000u) | value; + } else { + *epctrl = (*epctrl & 0x0000FFFFu) | (value << 16); + } +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_ctrl_mask(volatile uint32_t *epctrl, uint8_t dir, uint32_t and_mask, + uint32_t or_mask) { + uint32_t value = *epctrl; + if (and_mask != 0) { + value &= (dir == TUSB_DIR_OUT) ? and_mask : (and_mask << 16u); + } + if (or_mask != 0) { + value |= (dir == TUSB_DIR_OUT) ? or_mask : (or_mask << 16u); + } + + *epctrl = value; +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_ctrl_set(volatile uint32_t *epctrl, uint8_t dir, uint32_t mask) { + ep_ctrl_mask(epctrl, dir, 0, mask); +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_ctrl_clear(volatile uint32_t *epctrl, uint8_t dir, uint32_t mask) { + ep_ctrl_mask(epctrl, dir, ~mask, 0); +} + void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { uint8_t const epnum = tu_edpt_number(ep_addr); @@ -366,80 +394,91 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) // data toggle also need to be reset ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); dcd_reg->ENDPTCTRL[epnum] |= ENDPTCTRL_TOGGLE_RESET << ( dir ? 16 : 0 ); - dcd_reg->ENDPTCTRL[epnum] &= ~(ENDPTCTRL_STALL << ( dir ? 16 : 0)); + dcd_reg->ENDPTCTRL[epnum] &= ~(ENDPTCTRL_STALL << (dir ? 16 : 0)); } -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) -{ - uint8_t const epnum = tu_edpt_number(p_endpoint_desc->bEndpointAddress); - uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); - - ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); - - // Must not exceed max endpoint number - TU_ASSERT(epnum < ci_ep_count(dcd_reg)); - - //------------- Prepare Queue Head -------------// - dcd_qhd_t * p_qhd = &_dcd_data.qhd[epnum][dir]; +static void qhd_init(dcd_qhd_t *p_qhd, uint16_t max_packet_size, uint8_t iso_mult) { tu_memclr(p_qhd, sizeof(dcd_qhd_t)); - p_qhd->zero_length_termination = 1; - p_qhd->max_packet_size = tu_edpt_packet_size(p_endpoint_desc); - if (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) - { - p_qhd->iso_mult = 1; - } - + p_qhd->max_packet_size = max_packet_size; + p_qhd->iso_mult = iso_mult; p_qhd->qtd_overlay.next = QTD_NEXT_INVALID; - dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); +} - // Enable EP Control - uint32_t const epctrl = (p_endpoint_desc->bmAttributes.xfer << ENDPTCTRL_TYPE_POS) | ENDPTCTRL_ENABLE | ENDPTCTRL_TOGGLE_RESET; +bool dcd_edpt_open(uint8_t rhport, const tusb_desc_endpoint_t *endpoint_desc) { + ci_hs_regs_t *dcd_reg = CI_HS_REG(rhport); + const uint8_t epnum = tu_edpt_number(endpoint_desc->bEndpointAddress); + const uint8_t dir = tu_edpt_dir(endpoint_desc->bEndpointAddress); + const uint8_t xfer_type = endpoint_desc->bmAttributes.xfer; + TU_ASSERT(epnum < ci_ep_count(dcd_reg)); - if ( dir == TUSB_DIR_OUT ) - { - dcd_reg->ENDPTCTRL[epnum] = (dcd_reg->ENDPTCTRL[epnum] & 0xFFFF0000u) | epctrl; - }else - { - dcd_reg->ENDPTCTRL[epnum] = (dcd_reg->ENDPTCTRL[epnum] & 0x0000FFFFu) | (epctrl << 16); - } + dcd_qhd_t *p_qhd = &_dcd_data.qhd[epnum][dir]; + qhd_init(p_qhd, tu_edpt_packet_size(endpoint_desc), 0u); + + // EP Control + const uint32_t epctrl = ENDPTCTRL_TYPE(xfer_type) | ENDPTCTRL_ENABLE | ENDPTCTRL_TOGGLE_RESET; + ep_ctrl_write(&dcd_reg->ENDPTCTRL[epnum], dir, epctrl); return true; } -void dcd_edpt_close_all (uint8_t rhport) -{ - ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; - // Disable all non-control endpoints - uint8_t const ep_count = ci_ep_count(dcd_reg); - for (uint8_t epnum = 1; epnum < ep_count; epnum++) - { - _dcd_data.qhd[epnum][TUSB_DIR_OUT].qtd_overlay.halted = 1; - _dcd_data.qhd[epnum][TUSB_DIR_IN ].qtd_overlay.halted = 1; + ci_hs_regs_t *dcd_reg = CI_HS_REG(rhport); + const uint8_t epnum = tu_edpt_number(ep_addr); + const uint8_t dir = tu_edpt_dir(ep_addr); + TU_ASSERT(epnum < ci_ep_count(dcd_reg)); - dcd_reg->ENDPTFLUSH = TU_BIT(epnum) | TU_BIT(epnum+16); - dcd_reg->ENDPTCTRL[epnum] = (TUSB_XFER_BULK << ENDPTCTRL_TYPE_POS) | (TUSB_XFER_BULK << (16+ENDPTCTRL_TYPE_POS)); - } + // EP Control: set type but not enabled yet + const uint32_t epctrl = ENDPTCTRL_TYPE(TUSB_XFER_ISOCHRONOUS) | ENDPTCTRL_TOGGLE_RESET; + ep_ctrl_write(&dcd_reg->ENDPTCTRL[epnum], dir, epctrl); + + return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + const uint8_t epnum = tu_edpt_number(desc_ep->bEndpointAddress); + const uint8_t dir = tu_edpt_dir(desc_ep->bEndpointAddress); + ci_hs_regs_t *dcd_reg = CI_HS_REG(rhport); + TU_ASSERT(epnum < ci_ep_count(dcd_reg)); - ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); + dcd_qhd_t *p_qhd = &_dcd_data.qhd[epnum][dir]; + volatile uint32_t *endptctrl = &dcd_reg->ENDPTCTRL[epnum]; - _dcd_data.qhd[epnum][dir].qtd_overlay.halted = 1; + // _dcd_data.qhd[epnum][dir].qtd_overlay.halted = 1; + // dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); // Flush EP - uint32_t const flush_mask = TU_BIT(epnum + (dir ? 16 : 0)); - dcd_reg->ENDPTFLUSH = flush_mask; - while(dcd_reg->ENDPTFLUSH & flush_mask); + const uint32_t flush_mask = TU_BIT(epnum + (dir ? 16 : 0)); + dcd_reg->ENDPTFLUSH = flush_mask; + while (dcd_reg->ENDPTFLUSH & flush_mask) {} + + // disable to change max packet size + ep_ctrl_clear(endptctrl, dir, ENDPTCTRL_ENABLE); - // Clear EP enable - dcd_reg->ENDPTCTRL[epnum] &=~(ENDPTCTRL_ENABLE << (dir ? 16 : 0)); + qhd_init(p_qhd, tu_edpt_packet_size(desc_ep), 1u); + + ep_ctrl_set(endptctrl, dir, ENDPTCTRL_ENABLE); + + return true; +} + +void dcd_edpt_close_all(uint8_t rhport) { + ci_hs_regs_t *dcd_reg = CI_HS_REG(rhport); + + // Disable all non-control endpoints + uint8_t const ep_count = ci_ep_count(dcd_reg); + for (uint8_t epnum = 1; epnum < ep_count; epnum++) { + _dcd_data.qhd[epnum][TUSB_DIR_OUT].qtd_overlay.halted = 1; + _dcd_data.qhd[epnum][TUSB_DIR_IN].qtd_overlay.halted = 1; + + dcd_reg->ENDPTFLUSH = TU_BIT(epnum) | TU_BIT(epnum + 16); + dcd_reg->ENDPTCTRL[epnum] = ENDPTCTRL_RESET_MASK; + } } static void qhd_start_xfer(uint8_t rhport, uint8_t epnum, uint8_t dir) @@ -678,5 +717,4 @@ void dcd_int_handler(uint8_t rhport) dcd_event_sof(rhport, frame, true); } } - #endif diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c index 56ecb7575..868a10dd9 100644 --- a/src/portable/dialog/da146xx/dcd_da146xx.c +++ b/src/portable/dialog/da146xx/dcd_da146xx.c @@ -1025,6 +1025,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) tu_memclr(xfer, sizeof(*xfer)); } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { uint8_t const epnum = tu_edpt_number(ep_addr); @@ -1218,5 +1233,4 @@ void dcd_int_handler(uint8_t rhport) handle_alt_ev(); } } - #endif diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index b4a698199..8413a7ddd 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -687,6 +687,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) if (ie) intr_enable(rhport); } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { @@ -866,5 +881,4 @@ void dcd_int_handler(uint8_t rhport) intr_clear(rhport); } - #endif diff --git a/src/portable/microchip/pic32mz/dcd_pic32mz.c b/src/portable/microchip/pic32mz/dcd_pic32mz.c index cbd157d6b..b039bb505 100644 --- a/src/portable/microchip/pic32mz/dcd_pic32mz.c +++ b/src/portable/microchip/pic32mz/dcd_pic32mz.c @@ -438,12 +438,20 @@ void dcd_edpt_close_all (uint8_t rhport) } } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void) rhport; (void) ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { uint8_t const epnum = tu_edpt_number(ep_addr); @@ -744,5 +752,4 @@ void dcd_int_handler(uint8_t rhport) } } } - #endif diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index e43439f2a..383cf60e5 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -245,11 +245,17 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) return true; } -void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) { +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void) rhport; (void) ep_addr; + (void)largest_packet_size; + return false; +} - // TODO: implement if necessary? +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } void dcd_edpt_close_all (uint8_t rhport) @@ -427,5 +433,4 @@ void dcd_int_handler (uint8_t rhport) // Handle complete transfer maybe_transfer_complete(); } - #endif diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c index a5c768839..879b2eb2b 100644 --- a/src/portable/microchip/samg/dcd_samg.c +++ b/src/portable/microchip/samg/dcd_samg.c @@ -270,9 +270,17 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; (void) ep_addr; - // TODO implement dcd_edpt_close() +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } void dcd_edpt_close_all (uint8_t rhport) @@ -494,5 +502,4 @@ void dcd_int_handler(uint8_t rhport) } } } - #endif diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 8aec1568d..51308f7a2 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -559,15 +559,17 @@ void dcd_edpt_close_all (uint8_t rhport) // TODO implement dcd_edpt_close_all() } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void) rhport; - uint8_t const epnum = tu_edpt_number(ep_addr); + (void) ep_addr; + (void) largest_packet_size; + return false; +} - // Disable endpoint interrupt - USB_REG->DEVIDR = 1 << (DEVIDR_PEP_0_Pos + epnum); - // Disable EP - USB_REG->DEVEPT &=~(1 << (DEVEPT_EPEN0_Pos + epnum)); +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; } static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix) @@ -773,5 +775,4 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) USB_REG->DEVEPTIDR[epnum] = DEVEPTIDR_CTRL_STALLRQC; USB_REG->DEVEPTIER[epnum] = HSTPIPIER_RSTDTS; } - #endif diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c index 1ce3da27e..a232810a2 100644 --- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c +++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c @@ -26,7 +26,7 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_MM32F327X ) +#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_MM32F327X) #include "reg_usb_otg_fs.h" #include "mm32_device.h" @@ -43,56 +43,53 @@ enum { TOK_PID_SETUP = 0xDu, }; -typedef struct TU_ATTR_PACKED -{ +typedef struct TU_ATTR_PACKED { union { uint32_t head; struct { union { struct { - uint16_t : 2; - uint16_t tok_pid : 4; - uint16_t data : 1; - uint16_t own : 1; - uint16_t : 8; + uint16_t : 2; + uint16_t tok_pid : 4; + uint16_t data : 1; + uint16_t own : 1; + uint16_t : 8; }; struct { - uint16_t : 2; - uint16_t bdt_stall: 1; - uint16_t dts : 1; - uint16_t ninc : 1; - uint16_t keep : 1; - uint16_t : 10; + uint16_t : 2; + uint16_t bdt_stall : 1; + uint16_t dts : 1; + uint16_t ninc : 1; + uint16_t keep : 1; + uint16_t : 10; }; }; - uint16_t bc : 10; - uint16_t : 6; + uint16_t bc : 10; + uint16_t : 6; }; }; uint8_t *addr; -}buffer_descriptor_t; +} buffer_descriptor_t; -TU_VERIFY_STATIC( sizeof(buffer_descriptor_t) == 8, "size is not correct" ); +TU_VERIFY_STATIC(sizeof(buffer_descriptor_t) == 8, "size is not correct"); -typedef struct TU_ATTR_PACKED -{ +typedef struct TU_ATTR_PACKED { union { uint32_t state; struct { - uint32_t max_packet_size :11; + uint32_t max_packet_size : 11; uint32_t : 5; uint32_t odd : 1; - uint32_t :15; + uint32_t : 15; }; }; uint16_t length; uint16_t remaining; -}endpoint_state_t; +} endpoint_state_t; -TU_VERIFY_STATIC( sizeof(endpoint_state_t) == 8, "size is not correct" ); +TU_VERIFY_STATIC(sizeof(endpoint_state_t) == 8, "size is not correct"); -typedef struct -{ +typedef struct { union { /* [#EP][OUT,IN][EVEN,ODD] */ buffer_descriptor_t bdt[16][2][2]; @@ -104,7 +101,7 @@ typedef struct }; uint8_t setup_packet[8]; uint8_t addr; -}dcd_data_t; +} dcd_data_t; //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION @@ -112,10 +109,9 @@ typedef struct // BDT(Buffer Descriptor Table) must be 256-byte aligned CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; -TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); +TU_VERIFY_STATIC(sizeof(_dcd.bdt) == 512, "size is not correct"); -static void prepare_next_setup_packet(uint8_t rhport) -{ +static void prepare_next_setup_packet(uint8_t rhport) { const unsigned out_odd = _dcd.endpoint[0][0].odd; const unsigned in_odd = _dcd.endpoint[0][1].odd; if (_dcd.bdt[0][0][out_odd].own) { @@ -126,12 +122,10 @@ static void prepare_next_setup_packet(uint8_t rhport) _dcd.bdt[0][0][out_odd ^ 1].data = 1; _dcd.bdt[0][1][in_odd].data = 1; _dcd.bdt[0][1][in_odd ^ 1].data = 0; - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), - _dcd.setup_packet, sizeof(_dcd.setup_packet)); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), _dcd.setup_packet, sizeof(_dcd.setup_packet)); } -static void process_stall(uint8_t rhport) -{ +static void process_stall(uint8_t rhport) { if (USB_OTG_FS->EP_CTL[0] & USB_ENDPT_EPSTALL_MASK) { /* clear stall condition of the control pipe */ prepare_next_setup_packet(rhport); @@ -139,13 +133,12 @@ static void process_stall(uint8_t rhport) } } -static void process_tokdne(uint8_t rhport) -{ - const unsigned s = USB_OTG_FS->STAT; - USB_OTG_FS->INT_STAT = USB_ISTAT_TOKDNE_MASK; /* fetch the next token if received */ - buffer_descriptor_t *bd = (buffer_descriptor_t *)&_dcd.bda[s]; - endpoint_state_t *ep = &_dcd.endpoint_unified[s >> 3]; - unsigned odd = (s & USB_STAT_ODD_MASK) ? 1 : 0; +static void process_tokdne(uint8_t rhport) { + const unsigned s = USB_OTG_FS->STAT; + USB_OTG_FS->INT_STAT = USB_ISTAT_TOKDNE_MASK; /* fetch the next token if received */ + buffer_descriptor_t *bd = (buffer_descriptor_t *)&_dcd.bda[s]; + endpoint_state_t *ep = &_dcd.endpoint_unified[s >> 3]; + unsigned odd = (s & USB_STAT_ODD_MASK) ? 1 : 0; /* fetch pid before discarded by the next steps */ const unsigned pid = bd->tok_pid; @@ -155,7 +148,7 @@ static void process_tokdne(uint8_t rhport) bd->ninc = 0; bd->keep = 0; /* update the odd variable to prepare for the next transfer */ - ep->odd = odd ^ 1; + ep->odd = odd ^ 1; if (pid == TOK_PID_SETUP) { dcd_event_setup_received(rhport, bd->addr, true); USB_OTG_FS->CTL &= ~USB_CTL_TXSUSPENDTOKENBUSY_MASK; @@ -165,25 +158,24 @@ static void process_tokdne(uint8_t rhport) TU_LOG1("TKDNE %x\r\n", s); } - const unsigned bc = bd->bc; + const unsigned bc = bd->bc; const unsigned remaining = ep->remaining - bc; if (remaining && bc == ep->max_packet_size) { /* continue the transferring consecutive data */ - ep->remaining = remaining; + ep->remaining = remaining; const int next_remaining = remaining - ep->max_packet_size; if (next_remaining > 0) { /* prepare to the after next transfer */ bd->addr += ep->max_packet_size * 2; - bd->bc = next_remaining > ep->max_packet_size ? ep->max_packet_size: next_remaining; + bd->bc = next_remaining > ep->max_packet_size ? ep->max_packet_size : next_remaining; __DSB(); - bd->own = 1; /* the own bit must set after addr */ + bd->own = 1; /* the own bit must set after addr */ } return; } const unsigned length = ep->length; - dcd_event_xfer_complete(rhport, - ((s & USB_STAT_TX_MASK) << 4) | (s >> USB_STAT_ENDP_SHIFT), - length - remaining, XFER_RESULT_SUCCESS, true); + dcd_event_xfer_complete(rhport, ((s & USB_STAT_TX_MASK) << 4) | (s >> USB_STAT_ENDP_SHIFT), length - remaining, + XFER_RESULT_SUCCESS, true); if (0 == (s & USB_STAT_ENDP_MASK) && 0 == length) { /* After completion a ZLP of control transfer, * it prepares for the next steup transfer. */ @@ -191,24 +183,23 @@ static void process_tokdne(uint8_t rhport) /* When the transfer was the SetAddress, * the device address should be updated here. */ USB_OTG_FS->ADDR = _dcd.addr; - _dcd.addr = 0; + _dcd.addr = 0; } prepare_next_setup_packet(rhport); } } -static void process_bus_reset(uint8_t rhport) -{ - USB_OTG_FS->CTL |= USB_CTL_ODDRST_MASK; - USB_OTG_FS->ADDR = 0; - USB_OTG_FS->INT_ENB = (USB_OTG_FS->INT_ENB & ~USB_INTEN_RESUMEEN_MASK) | USB_INTEN_SLEEPEN_MASK; +static void process_bus_reset(uint8_t rhport) { + USB_OTG_FS->CTL |= USB_CTL_ODDRST_MASK; + USB_OTG_FS->ADDR = 0; + USB_OTG_FS->INT_ENB = (USB_OTG_FS->INT_ENB & ~USB_INTEN_RESUMEEN_MASK) | USB_INTEN_SLEEPEN_MASK; USB_OTG_FS->EP_CTL[0] = USB_ENDPT_EPHSHK_MASK | USB_ENDPT_EPRXEN_MASK | USB_ENDPT_EPTXEN_MASK; for (unsigned i = 1; i < 16; ++i) { USB_OTG_FS->EP_CTL[i] = 0; } buffer_descriptor_t *bd = _dcd.bdt[0][0]; - for (unsigned i = 0; i < sizeof(_dcd.bdt)/sizeof(*bd); ++i, ++bd) { + for (unsigned i = 0; i < sizeof(_dcd.bdt) / sizeof(*bd); ++i, ++bd) { bd->head = 0; } const endpoint_state_t ep0 = { @@ -226,31 +217,29 @@ static void process_bus_reset(uint8_t rhport) dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true); } -static void process_bus_inactive(uint8_t rhport) -{ - (void) rhport; +static void process_bus_inactive(uint8_t rhport) { + (void)rhport; const unsigned inten = USB_OTG_FS->INT_ENB; - USB_OTG_FS->INT_ENB = (inten & ~USB_INTEN_SLEEPEN_MASK) | USB_INTEN_RESUMEEN_MASK; + USB_OTG_FS->INT_ENB = (inten & ~USB_INTEN_SLEEPEN_MASK) | USB_INTEN_RESUMEEN_MASK; dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); } -static void process_bus_active(uint8_t rhport) -{ - (void) rhport; +static void process_bus_active(uint8_t rhport) { + (void)rhport; const unsigned inten = USB_OTG_FS->INT_ENB; - USB_OTG_FS->INT_ENB = (inten & ~USB_INTEN_RESUMEEN_MASK) | USB_INTEN_SLEEPEN_MASK; + USB_OTG_FS->INT_ENB = (inten & ~USB_INTEN_RESUMEEN_MASK) | USB_INTEN_SLEEPEN_MASK; dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); } /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { - (void) rhport; - (void) rh_init; +bool dcd_init(uint8_t rhport, const tusb_rhport_init_t *rh_init) { + (void)rhport; + (void)rh_init; tu_memclr(&_dcd, sizeof(_dcd)); - USB_OTG_FS->BDT_PAGE_01 = (uint8_t)((uintptr_t)_dcd.bdt >> 8); + USB_OTG_FS->BDT_PAGE_01 = (uint8_t)((uintptr_t)_dcd.bdt >> 8); USB_OTG_FS->BDT_PAGE_02 = (uint8_t)((uintptr_t)_dcd.bdt >> 16); USB_OTG_FS->BDT_PAGE_03 = (uint8_t)((uintptr_t)_dcd.bdt >> 24); @@ -259,27 +248,24 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { return true; } #define USB_DEVICE_INTERRUPT_PRIORITY (3U) -void dcd_int_enable(uint8_t rhport) -{ +void dcd_int_enable(uint8_t rhport) { uint8_t irqNumber; irqNumber = USB_FS_IRQn; - (void) rhport; - USB_OTG_FS->INT_ENB = USB_INTEN_USBRSTEN_MASK | USB_INTEN_TOKDNEEN_MASK | - USB_INTEN_SLEEPEN_MASK | USB_INTEN_ERROREN_MASK | USB_INTEN_STALLEN_MASK; + (void)rhport; + USB_OTG_FS->INT_ENB = USB_INTEN_USBRSTEN_MASK | USB_INTEN_TOKDNEEN_MASK | USB_INTEN_SLEEPEN_MASK | + USB_INTEN_ERROREN_MASK | USB_INTEN_STALLEN_MASK; NVIC_SetPriority((IRQn_Type)irqNumber, USB_DEVICE_INTERRUPT_PRIORITY); NVIC_EnableIRQ(USB_FS_IRQn); } -void dcd_int_disable(uint8_t rhport) -{ - (void) rhport; +void dcd_int_disable(uint8_t rhport) { + (void)rhport; NVIC_DisableIRQ(USB_FS_IRQn); USB_OTG_FS->INT_ENB = 0; } -void dcd_set_address(uint8_t rhport, uint8_t dev_addr) -{ - (void) rhport; +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { + (void)rhport; _dcd.addr = dev_addr & 0x7F; /* Response with status first before changing device address */ dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); @@ -296,31 +282,29 @@ extern u32 SystemCoreClock; #pragma GCC diagnostic pop #endif -void dcd_remote_wakeup(uint8_t rhport) -{ - (void) rhport; +void dcd_remote_wakeup(uint8_t rhport) { + (void)rhport; unsigned cnt = SystemCoreClock / 100; USB_OTG_FS->CTL |= USB_CTL_RESUME_MASK; - while (cnt--) __NOP(); + while (cnt--) { + __NOP(); + } USB_OTG_FS->CTL &= ~USB_CTL_RESUME_MASK; } -void dcd_connect(uint8_t rhport) -{ - (void) rhport; - USB_OTG_FS->CTL |= USB_CTL_USBENSOFEN_MASK; +void dcd_connect(uint8_t rhport) { + (void)rhport; + USB_OTG_FS->CTL |= USB_CTL_USBENSOFEN_MASK; } -void dcd_disconnect(uint8_t rhport) -{ - (void) rhport; - USB_OTG_FS->CTL = 0; +void dcd_disconnect(uint8_t rhport) { + (void)rhport; + USB_OTG_FS->CTL = 0; } -void dcd_sof_enable(uint8_t rhport, bool en) -{ - (void) rhport; - (void) en; +void dcd_sof_enable(uint8_t rhport, bool en) { + (void)rhport; + (void)en; // TODO implement later } @@ -328,24 +312,23 @@ void dcd_sof_enable(uint8_t rhport, bool en) //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; - - const unsigned ep_addr = ep_desc->bEndpointAddress; - const unsigned epn = ep_addr & 0xFu; - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - const unsigned xfer = ep_desc->bmAttributes.xfer; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - const unsigned odd = ep->odd; - buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][0]; +bool dcd_edpt_open(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + (void)rhport; + + const unsigned ep_addr = ep_desc->bEndpointAddress; + const unsigned epn = ep_addr & 0xFu; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + const unsigned xfer = ep_desc->bmAttributes.xfer; + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + const unsigned odd = ep->odd; + buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][0]; /* No support for control transfer */ TU_ASSERT(epn && (xfer != TUSB_XFER_CONTROL)); ep->max_packet_size = tu_edpt_packet_size(ep_desc); - unsigned val = USB_ENDPT_EPCTLDIS_MASK; - val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK: 0; + unsigned val = USB_ENDPT_EPCTLDIS_MASK; + val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK : 0; val |= dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; USB_OTG_FS->EP_CTL[epn] |= val; @@ -359,21 +342,19 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) return true; } -void dcd_edpt_close_all (uint8_t rhport) -{ - (void) rhport; +void dcd_edpt_close_all(uint8_t rhport) { + (void)rhport; // TODO implement dcd_edpt_close_all() } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { + (void)rhport; - const unsigned epn = ep_addr & 0xFu; - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][0]; - const unsigned msk = dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; + const unsigned epn = ep_addr & 0xFu; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][0]; + const unsigned msk = dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; USB_OTG_FS->EP_CTL[epn] &= ~msk; ep->max_packet_size = 0; ep->length = 0; @@ -381,14 +362,28 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) bd->head = 0; } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) -{ - (void) rhport; + #if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + #endif + +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { + (void)rhport; NVIC_DisableIRQ(USB_FS_IRQn); - const unsigned epn = ep_addr & 0xFu; - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][ep->odd]; + const unsigned epn = ep_addr & 0xFu; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][ep->odd]; if (bd->own) { TU_LOG1("DCD XFER fail %x %d %lx %lx\r\n", ep_addr, total_bytes, ep->state, bd->head); @@ -399,42 +394,40 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to const unsigned mps = ep->max_packet_size; if (total_bytes > mps) { - buffer_descriptor_t *next = ep->odd ? bd - 1: bd + 1; + buffer_descriptor_t *next = ep->odd ? bd - 1 : bd + 1; /* When total_bytes is greater than the max packet size, * it prepares to the next transfer to avoid NAK in advance. */ - next->bc = total_bytes >= 2 * mps ? mps: total_bytes - mps; + next->bc = total_bytes >= 2 * mps ? mps : total_bytes - mps; next->addr = buffer + mps; next->own = 1; } - bd->bc = total_bytes >= mps ? mps: total_bytes; - bd->addr = buffer; + bd->bc = total_bytes >= mps ? mps : total_bytes; + bd->addr = buffer; __DSB(); - bd->own = 1; /* the own bit must set after addr */ + bd->own = 1; /* the own bit must set after addr */ NVIC_EnableIRQ(USB_FS_IRQn); return true; } -void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { + (void)rhport; const unsigned epn = ep_addr & 0xFu; if (0 == epn) { - USB_OTG_FS->EP_CTL[epn] |= USB_ENDPT_EPSTALL_MASK; + USB_OTG_FS->EP_CTL[epn] |= USB_ENDPT_EPSTALL_MASK; } else { - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; - bd[0].bdt_stall = 1; - bd[1].bdt_stall = 1; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; + bd[0].bdt_stall = 1; + bd[1].bdt_stall = 1; } } -void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; - const unsigned epn = ep_addr & 0xFu; - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - const unsigned odd = _dcd.endpoint[epn][dir].odd; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { + (void)rhport; + const unsigned epn = ep_addr & 0xFu; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + const unsigned odd = _dcd.endpoint[epn][dir].odd; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; bd[odd ^ 1].own = 0; bd[odd ^ 1].data = 1; @@ -447,19 +440,18 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) //--------------------------------------------------------------------+ // ISR //--------------------------------------------------------------------+ -void dcd_int_handler(uint8_t rhport) -{ - (void) rhport; +void dcd_int_handler(uint8_t rhport) { + (void)rhport; - uint32_t is = USB_OTG_FS->INT_STAT; - uint32_t msk = USB_OTG_FS->INT_ENB; + uint32_t is = USB_OTG_FS->INT_STAT; + uint32_t msk = USB_OTG_FS->INT_ENB; USB_OTG_FS->INT_STAT = is & ~msk; is &= msk; if (is & USB_ISTAT_ERROR_MASK) { /* TODO: */ - uint32_t es = USB_OTG_FS->ERR_STAT; + uint32_t es = USB_OTG_FS->ERR_STAT; USB_OTG_FS->ERR_STAT = es; - USB_OTG_FS->INT_STAT = is; /* discard any pending events */ + USB_OTG_FS->INT_STAT = is; /* discard any pending events */ return; } @@ -493,5 +485,4 @@ void dcd_int_handler(uint8_t rhport) return; } } - #endif diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 9e5f5117f..730ca7fb1 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -426,6 +426,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { __DSB(); } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { (void) rhport; @@ -1062,5 +1077,4 @@ void tusb_hal_nrf_power_event(uint32_t event) { break; } } - #endif diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 3d5e195a9..da1c5c888 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -428,6 +428,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) if (ie) NVIC_EnableIRQ(USB0_IRQn); } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} + #endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { (void) rhport; @@ -577,5 +592,4 @@ void dcd_int_handler(uint8_t rhport) process_tokdne(rhport); } } - #endif diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index 855c59cd1..5516e1ba6 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -337,9 +337,17 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; (void) ep_addr; - // TODO implement dcd_edpt_close() +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } void dcd_edpt_close_all (uint8_t rhport) @@ -600,5 +608,4 @@ void dcd_int_handler(uint8_t rhport) TU_BREAKPOINT(); } } - #endif diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 7c637ce0c..1c135f3be 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -432,6 +432,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) _dcd.ep[ep_id][0].cmd_sts.disable = _dcd.ep[ep_id][1].cmd_sts.disable = 1; } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} +#endif + static void prepare_ep_xfer(uint8_t rhport, uint8_t ep_id, uint16_t buf_offset, uint16_t total_bytes) { uint16_t nbytes; ep_cmd_sts_t* ep_cs = get_ep_cs(ep_id); @@ -631,5 +646,4 @@ void dcd_int_handler(uint8_t rhport) // Endpoint transfer complete interrupt process_xfer_isr(rhport, int_status); } - #endif diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c index 60afbd435..25ef117c2 100644 --- a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -113,6 +113,19 @@ void dcd_edpt_close_all (uint8_t rhport) (void) rhport; } +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { @@ -207,5 +220,4 @@ void __no_inline_not_in_flash_func(pio_usb_device_irq_handler)(uint8_t root_id) // clear all rport->ints &= ~ints; } - #endif diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index ecd28973c..2cc79aa74 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -859,6 +859,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) _dcd.ep[dir][epn] = 0; } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { rusb2_reg_t* rusb = RUSB2_REG(rhport); @@ -1028,5 +1043,4 @@ void dcd_int_handler(uint8_t rhport) } } } - #endif diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index f1f4897cb..8e6dc8c63 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -1082,6 +1082,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) musb_int_unmask(); } + #if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + #endif + // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { @@ -1210,5 +1225,4 @@ void dcd_int_handler(uint8_t rhport) rxis &= ~TU_BIT(num); } } - #endif diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index 64cbc5087..e4c28a56f 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -333,11 +333,20 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; (void) ep_addr; - // TODO implement dcd_edpt_close() +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; } +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + + void dcd_edpt_close_all (uint8_t rhport) { (void) rhport; @@ -821,5 +830,4 @@ void dcd_int_handler(uint8_t rhport) } } - #endif diff --git a/src/portable/valentyusb/eptri/dcd_eptri.c b/src/portable/valentyusb/eptri/dcd_eptri.c index a03c94558..f0e52ae47 100644 --- a/src/portable/valentyusb/eptri/dcd_eptri.c +++ b/src/portable/valentyusb/eptri/dcd_eptri.c @@ -438,9 +438,17 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; (void) ep_addr; - // TODO implement dcd_edpt_close() +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } void dcd_edpt_close_all (uint8_t rhport) @@ -659,5 +667,4 @@ void dcd_int_handler(uint8_t rhport) } } } - #endif diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index c248ba14e..f8c3b05c3 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -283,12 +283,20 @@ void dcd_edpt_close_all(uint8_t rhport) { // TODO optional } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void) rhport; (void) ep_addr; - // TODO optional + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { (void) rhport; uint8_t ep = tu_edpt_number(ep_addr); @@ -344,5 +352,4 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { } } } - #endif diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 4a208b9df..36fdc89ef 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -27,13 +27,14 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && defined(CFG_TUD_WCH_USBIP_USBHS) && CFG_TUD_WCH_USBIP_USBHS -#include "ch32_usbhs_reg.h" +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && defined(CFG_TUD_WCH_USBIP_USBHS) && \ + (CFG_TUD_WCH_USBIP_USBHS == 1) + #include "ch32_usbhs_reg.h" -#include "device/dcd.h" + #include "device/dcd.h" -// Max number of bi-directional endpoints including EP0 -#define EP_MAX 16 + // Max number of bi-directional endpoints including EP0 + #define EP_MAX 16 typedef struct { uint8_t* buffer; @@ -288,6 +289,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { } } + #if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} + #endif + void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { (void) rhport; @@ -419,5 +435,4 @@ void dcd_int_handler(uint8_t rhport) { USBHSD->INT_FG = USBHS_SUSPEND_FLAG; /* Clear flag */ } } - #endif -- cgit v1.3.1 From be9d1973ac4c30fedd24b8199fd4dee5c842e2ef Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 17 Nov 2025 17:45:38 +0700 Subject: make TUP_DCD_EDPT_ISO_ALLOC i.e dcd_edpt_iso_alloc()/dcd_edpt_iso_activate() as default driver implementation. dcd_edpt_close() is deprecated and will be removed from all driver in the future. --- examples/device/video_capture/skip.txt | 1 - examples/device/video_capture_2ch/skip.txt | 1 - hw/bsp/family_support.cmake | 3 + hw/bsp/mcx/boards/frdm_mcxa153/board.cmake | 9 +- hw/bsp/mcx/boards/frdm_mcxa153/board.mk | 8 + .../mcx/boards/frdm_mcxa153/board/clock_config.c | 559 ++++++++++++++++++++ .../mcx/boards/frdm_mcxa153/board/clock_config.h | 385 ++++++++++++++ hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c | 492 ++++++++++++++++++ hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h | 211 ++++++++ hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c | 466 ----------------- hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h | 170 ------ hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex | 573 +++++++++++++++++++++ hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c | 130 ----- hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h | 51 -- hw/bsp/mcx/family.c | 7 +- hw/bsp/mcx/family.mk | 13 +- src/common/tusb_mcu.h | 11 +- src/portable/chipidea/ci_fs/dcd_ci_fs.c | 83 ++- src/portable/nxp/khci/dcd_khci.c | 78 ++- 19 files changed, 2313 insertions(+), 938 deletions(-) create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt index 50302c544..cb0c7d2e6 100644 --- a/examples/device/video_capture/skip.txt +++ b/examples/device/video_capture/skip.txt @@ -1,6 +1,5 @@ mcu:CH32V103 mcu:CH32V20X -mcu:MCXA15 mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 diff --git a/examples/device/video_capture_2ch/skip.txt b/examples/device/video_capture_2ch/skip.txt index 0f6508226..af3b0de04 100644 --- a/examples/device/video_capture_2ch/skip.txt +++ b/examples/device/video_capture_2ch/skip.txt @@ -6,7 +6,6 @@ mcu:CH32V103 mcu:CH32V20X mcu:CH32V307 mcu:STM32L0 -mcu:MCXA15 family:espressif board:curiosity_nano board:kuiic diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 23dfb9d80..2b9612186 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -264,6 +264,9 @@ function(family_configure_common TARGET RTOS) ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib SKIP_LINTING ON # need cmake 4.2 ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_target_properties(${BOARD_TARGET} PROPERTIES COMPILE_OPTIONS -w) + endif () endif () target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET}) endif () diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake index 7cd8991e6..e6619992f 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake @@ -14,8 +14,11 @@ function(update_board TARGET) BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED CFG_EXAMPLE_VIDEO_READONLY ) - target_sources(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c + target_sources(${TARGET} PRIVATE + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board/clock_config.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board/pin_mux.c + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board ) endfunction() diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.mk b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk index af8416d8e..34558b43e 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board.mk +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk @@ -6,6 +6,14 @@ CPU_CORE = cortex-m33-nodsp-nofp CFLAGS += \ -DCPU_MCXA153VLH \ -DCFG_TUSB_MCU=OPT_MCU_MCXA15 \ + -DCFG_EXAMPLE_VIDEO_READONLY + +SRC_C += \ + ${BOARD_PATH}/board/clock_config.c \ + ${BOARD_PATH}/board/pin_mux.c + +INC += \ + $(TOP)/$(BOARD_PATH)/board JLINK_DEVICE = MCXA153 PYOCD_TARGET = MCXA153 diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c new file mode 100644 index 000000000..599110d7a --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c @@ -0,0 +1,559 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to setup clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + * + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v18.0 +processor: MCXA153 +package_id: MCXA153VLH +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: FRDM-MCXA153 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_clock.h" +#include "clock_config.h" +#include "fsl_spc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +extern uint32_t SystemCoreClock; + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockFRO96M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CPU_clock.outFreq, value: 12 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: MAIN_clock.outFreq, value: 12 MHz} +- {id: Slow_clock.outFreq, value: 3 MHz} +- {id: System_clock.outFreq, value: 12 MHz} +- {id: TRACE_clock.outFreq, value: 12 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: SCGMode, value: SIRC} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SCG.SCSSEL.sel, value: SCG.SIRC} +- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO12M */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO24M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 24 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 6 MHz} +- {id: System_clock.outFreq, value: 24 MHz} +- {id: TRACE_clock.outFreq, value: 24 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '2'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +void BOARD_BootClockFRO24M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 2U); /* !< Set AHBCLKDIV divider to value 2 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO24M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO48M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 48 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 12 MHz} +- {id: System_clock.outFreq, value: 48 MHz} +- {id: TRACE_clock.outFreq, value: 48 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +void BOARD_BootClockFRO48M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO48M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO64M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 64 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 64 MHz} +- {id: FRO_HF_clock.outFreq, value: 64 MHz} +- {id: MAIN_clock.outFreq, value: 64 MHz} +- {id: Slow_clock.outFreq, value: 16 MHz} +- {id: System_clock.outFreq, value: 64 MHz} +- {id: TRACE_clock.outFreq, value: 64 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} +sources: +- {id: SCG.FIRC.outFreq, value: 64 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +void BOARD_BootClockFRO64M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(64000000U); /*!< Enable FRO HF(64MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO64M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO96M +called_from_default_init: true +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 96 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 96 MHz} +- {id: FRO_HF_clock.outFreq, value: 96 MHz} +- {id: MAIN_clock.outFreq, value: 96 MHz} +- {id: Slow_clock.outFreq, value: 24 MHz} +- {id: System_clock.outFreq, value: 96 MHz} +- {id: TRACE_clock.outFreq, value: 96 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +sources: +- {id: SCG.FIRC.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +void BOARD_BootClockFRO96M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(96000000U); /*!< Enable FRO HF(96MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO96M_CORE_CLOCK; +} diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h new file mode 100644 index 000000000..d609eb468 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h @@ -0,0 +1,385 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO12M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO12M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO12M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO12M_CLK_48M_CLOCK 0UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO12M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO12M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO12M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO12M_CPU_CLOCK 12000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO12M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO12M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO12M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_FRO_HF_DIV_CLOCK 0UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_FRO_HF_CLOCK 0UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO12M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO12M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO12M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO12M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO12M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO12M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO12M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO12M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO12M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO12M_MAIN_CLOCK 12000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO12M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SLOW_CLOCK 3000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 12000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO12M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO24M_CORE_CLOCK 24000000U /*!< Core clock frequency: 24000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO24M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO24M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO24M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO24M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO24M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO24M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO24M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO24M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO24M_CPU_CLOCK 24000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO24M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO24M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO24M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO24M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO24M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_FRO_HF_DIV_CLOCK 48000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_FRO_HF_CLOCK 48000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO24M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO24M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO24M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO24M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO24M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO24M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO24M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO24M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO24M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO24M_MAIN_CLOCK 48000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO24M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO24M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_SLOW_CLOCK 6000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO24M_SYSTEM_CLOCK 24000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO24M_TRACE_CLOCK 24000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO24M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO24M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO24M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO24M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO48M_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO48M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO48M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO48M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO48M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO48M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO48M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO48M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO48M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO48M_CPU_CLOCK 48000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO48M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO48M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO48M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO48M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO48M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_FRO_HF_DIV_CLOCK 48000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_FRO_HF_CLOCK 48000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO48M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO48M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO48M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO48M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO48M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO48M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO48M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO48M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO48M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO48M_MAIN_CLOCK 48000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO48M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO48M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_SLOW_CLOCK 12000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO48M_SYSTEM_CLOCK 48000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO48M_TRACE_CLOCK 48000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO48M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO48M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO48M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO48M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO64M_CORE_CLOCK 64000000U /*!< Core clock frequency: 64000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO64M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO64M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO64M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO64M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO64M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO64M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO64M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO64M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO64M_CPU_CLOCK 64000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO64M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO64M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO64M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO64M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO64M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_FRO_HF_DIV_CLOCK 64000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_FRO_HF_CLOCK 64000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO64M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO64M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO64M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO64M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO64M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO64M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO64M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO64M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO64M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO64M_MAIN_CLOCK 64000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO64M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO64M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_SLOW_CLOCK 16000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO64M_SYSTEM_CLOCK 64000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO64M_TRACE_CLOCK 64000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO64M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO64M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO64M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO64M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO96M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO96M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO96M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO96M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO96M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO96M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO96M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO96M_CPU_CLOCK 96000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO96M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO96M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO96M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_FRO_HF_DIV_CLOCK 96000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_FRO_HF_CLOCK 96000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO96M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO96M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO96M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO96M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO96M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO96M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO96M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO96M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO96M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO96M_MAIN_CLOCK 96000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO96M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO96M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_SLOW_CLOCK 24000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO96M_TRACE_CLOCK 96000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO96M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO96M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO96M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c new file mode 100644 index 000000000..58b0f47e9 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c @@ -0,0 +1,492 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v17.0 +processor: MCXA153 +package_id: MCXA153VLH +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: FRDM-MCXA153 +external_user_signals: {} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_port.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitDEBUG_UARTPins(); + BOARD_InitLEDsPins(); + BOARD_InitBUTTONsPins(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '51', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, + drive_strength: high, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '52', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) +{ + /* Write to PORT0: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + /* LPUART0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); + /* PORT0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); + + const port_pin_config_t DEBUG_UART_RX = {/* Internal pull-up/down resistor is disabled */ + .pullSelect = kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* High drive strength is configured */ + .driveStrength = kPORT_HighDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_RXD */ + .mux = kPORT_MuxAlt2, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_2 (pin 51) is configured as LPUART0_RXD */ + PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, &DEBUG_UART_RX); + + const port_pin_config_t DEBUG_UART_TX = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_TXD */ + .mux = kPORT_MuxAlt2, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_3 (pin 52) is configured as LPUART0_TXD */ + PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, &DEBUG_UART_TX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSWD_DEBUGPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '50', peripheral: SWD, signal: SWCLK, pin_signal: P0_1/TCLK/SWCLK/LPUART0_CTS_B/LPSPI0_SDI/CT_INP1, slew_rate: fast, open_drain: disable, drive_strength: low, + pull_select: down, pull_enable: enable, input_buffer: enable, invert_input: normal} + - {pin_num: '49', peripheral: SWD, signal: SWDIO, pin_signal: P0_0/TMS/SWDIO/LPUART0_RTS_B/LPSPI0_PCS0/CT_INP0, slew_rate: fast, open_drain: disable, drive_strength: high, + pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + - {pin_num: '51', peripheral: SWD, signal: SWO, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, + drive_strength: high, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSWD_DEBUGPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitSWD_DEBUGPins(void) +{ + /* Write to PORT0: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + /* PORT0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); + /* LPUART0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); + + const port_pin_config_t DEBUG_SWD_SWDIO = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* High drive strength is configured */ + .driveStrength = kPORT_HighDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as SWDIO */ + .mux = kPORT_MuxAlt1, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_0 (pin 49) is configured as SWDIO */ + PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, &DEBUG_SWD_SWDIO); + + const port_pin_config_t DEBUG_SWD_SWDCLK = {/* Internal pull-down resistor is enabled */ + .pullSelect = kPORT_PullDown, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as SWCLK */ + .mux = kPORT_MuxAlt1, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_1 (pin 50) is configured as SWCLK */ + PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, &DEBUG_SWD_SWDCLK); + + const port_pin_config_t DEBUG_UART_RX = {/* Internal pull-up/down resistor is disabled */ + .pullSelect = kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* High drive strength is configured */ + .driveStrength = kPORT_HighDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as SWO */ + .mux = kPORT_MuxAlt1, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_2 (pin 51) is configured as SWO */ + PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN, &DEBUG_UART_RX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLEDsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '37', peripheral: GPIO3, signal: 'GPIO, 13', pin_signal: P3_13/LPUART2_CTS_B/CT1_MAT3/PWM0_X1, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '38', peripheral: GPIO3, signal: 'GPIO, 12', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '46', peripheral: GPIO3, signal: 'GPIO, 0', pin_signal: P3_0/WUU0_IN22/TRIG_IN0/CT_INP16/PWM0_A0, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, passive_filter: disable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLEDsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitLEDsPins(void) +{ + /* Write to GPIO3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GateGPIO3); + /* Write to PORT3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT3); + /* GPIO3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); + /* PORT3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); + + gpio_pin_config_t LED_BLUE_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO3_0 (pin 46) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config); + + gpio_pin_config_t LED_RED_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO3_12 (pin 38) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config); + + gpio_pin_config_t LED_GREEN_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO3_13 (pin 37) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config); + + /* PORT3_0 (pin 46) is configured as P3_0 */ + PORT_SetPinMux(BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, kPORT_MuxAlt0); + + PORT3->PCR[0] = + ((PORT3->PCR[0] & + /* Mask bits to zero which are setting */ + (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_PFE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) + + /* Pull Select: Enables internal pullup resistor. */ + | PORT_PCR_PS(PCR_PS_ps1) + + /* Pull Enable: Disables. */ + | PORT_PCR_PE(PCR_PE_pe0) + + /* Slew Rate Enable: Fast. */ + | PORT_PCR_SRE(PCR_SRE_sre0) + + /* Passive Filter Enable: Disables. */ + | PORT_PCR_PFE(PCR_PFE_pfe0) + + /* Open Drain Enable: Disables. */ + | PORT_PCR_ODE(PCR_ODE_ode0) + + /* Drive Strength Enable: Low. */ + | PORT_PCR_DSE(PCR_DSE_dse0) + + /* Input Buffer Enable: Enables. */ + | PORT_PCR_IBE(PCR_IBE_ibe1) + + /* Invert Input: Does not invert. */ + | PORT_PCR_INV(PCR_INV_inv0)); + + /* PORT3_12 (pin 38) is configured as P3_12 */ + PORT_SetPinMux(BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, kPORT_MuxAlt0); + + PORT3->PCR[12] = + ((PORT3->PCR[12] & + /* Mask bits to zero which are setting */ + (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) + + /* Pull Select: Enables internal pullup resistor. */ + | PORT_PCR_PS(PCR_PS_ps1) + + /* Pull Enable: Disables. */ + | PORT_PCR_PE(PCR_PE_pe0) + + /* Slew Rate Enable: Fast. */ + | PORT_PCR_SRE(PCR_SRE_sre0) + + /* Open Drain Enable: Disables. */ + | PORT_PCR_ODE(PCR_ODE_ode0) + + /* Drive Strength Enable: Low. */ + | PORT_PCR_DSE(PCR_DSE_dse0) + + /* Input Buffer Enable: Enables. */ + | PORT_PCR_IBE(PCR_IBE_ibe1) + + /* Invert Input: Does not invert. */ + | PORT_PCR_INV(PCR_INV_inv0)); + + /* PORT3_13 (pin 37) is configured as P3_13 */ + PORT_SetPinMux(BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, kPORT_MuxAlt0); + + PORT3->PCR[13] = + ((PORT3->PCR[13] & + /* Mask bits to zero which are setting */ + (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) + + /* Pull Select: Enables internal pullup resistor. */ + | PORT_PCR_PS(PCR_PS_ps1) + + /* Pull Enable: Disables. */ + | PORT_PCR_PE(PCR_PE_pe0) + + /* Slew Rate Enable: Fast. */ + | PORT_PCR_SRE(PCR_SRE_sre0) + + /* Open Drain Enable: Disables. */ + | PORT_PCR_ODE(PCR_ODE_ode0) + + /* Drive Strength Enable: Low. */ + | PORT_PCR_DSE(PCR_DSE_dse0) + + /* Input Buffer Enable: Enables. */ + | PORT_PCR_IBE(PCR_IBE_ibe1) + + /* Invert Input: Does not invert. */ + | PORT_PCR_INV(PCR_INV_inv0)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitBUTTONsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '1', peripheral: GPIO1, signal: 'GPIO, 7', pin_signal: P1_7/WUU0_IN9/TRIG_OUT2/LPUART2_CTS_B/CT_INP7/ADC0_A23, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '8', peripheral: GPIO1, signal: 'GPIO, 29', pin_signal: P1_29/RESET_B/SPC_LPREQ, slew_rate: fast, open_drain: enable, drive_strength: low, pull_select: up, + pull_enable: enable, passive_filter: enable, pull_value: low, input_buffer: enable, invert_input: normal} + - {pin_num: '32', peripheral: GPIO3, signal: 'GPIO, 29', pin_signal: P3_29/WUU0_IN27/ISPMODE_N/CT_INP3/ADC0_A14, slew_rate: fast, open_drain: disable, drive_strength: low, + pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBUTTONsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitBUTTONsPins(void) +{ + /* Write to PORT1: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT1); + /* Write to PORT3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT3); + /* GPIO1 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO1_RST_SHIFT_RSTn); + /* PORT1 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT1_RST_SHIFT_RSTn); + /* GPIO3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); + /* PORT3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); + + const port_pin_config_t SW1 = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is enabled */ + .passiveFilterEnable = kPORT_PassiveFilterEnable, + /* Open drain output is enabled */ + .openDrainEnable = kPORT_OpenDrainEnable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as P1_29 */ + .mux = kPORT_MuxAlt0, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT1_29 (pin 8) is configured as P1_29 */ + PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW1_PORT, BOARD_INITBUTTONSPINS_SW1_PIN, &SW1); + + const port_pin_config_t SW3 = {/* Internal pull-up/down resistor is disabled */ + .pullSelect = kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as P1_7 */ + .mux = kPORT_MuxAlt0, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT1_7 (pin 1) is configured as P1_7 */ + PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW3_PORT, BOARD_INITBUTTONSPINS_SW3_PIN, &SW3); + + const port_pin_config_t ISP = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as P3_29 */ + .mux = kPORT_MuxAlt0, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT3_29 (pin 32) is configured as P3_29 */ + PORT_SetPinConfig(BOARD_INITBUTTONSPINS_ISP_PORT, BOARD_INITBUTTONSPINS_ISP_PIN, &ISP); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h new file mode 100644 index 000000000..4a42f266d --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h @@ -0,0 +1,211 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/*! @name PORT0_2 (number 51), P0_2/SWO/J25[3]/J18[6] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 2U /*!<@brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 2U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT0_3 (number 52), P0_3/J25[1]/J18[8] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 3U /*!<@brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 3U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/*! @name PORT0_1 (number 50), P0_1/SWCLK/JP10[2]/J18[4] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 1U /*!<@brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 1U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT0_0 (number 49), P0_0/SWDIO/J18[2] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 0U /*!<@brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT0_2 (number 51), P0_2/SWO/J25[3]/J18[6] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN 2U /*!<@brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN_MASK (1U << 2U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSWD_DEBUGPins(void); + +#define PCR_DSE_dse0 0x00u /*!<@brief Drive Strength Enable: Low */ +#define PCR_IBE_ibe1 0x01u /*!<@brief Input Buffer Enable: Enables */ +#define PCR_INV_inv0 0x00u /*!<@brief Invert Input: Does not invert */ +#define PCR_ODE_ode0 0x00u /*!<@brief Open Drain Enable: Disables */ +#define PCR_PE_pe0 0x00u /*!<@brief Pull Enable: Disables */ +#define PCR_PFE_pfe0 0x00u /*!<@brief Passive Filter Enable: Disables */ +#define PCR_PS_ps1 0x01u /*!<@brief Pull Select: Enables internal pullup resistor */ +#define PCR_SRE_sre0 0x00u /*!<@brief Slew Rate Enable: Fast */ + +/*! @name PORT3_13 (number 37), P3_13/J1[14] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN 13U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN_MASK (1U << 13U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITLEDSPINS_LED_GREEN_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN 13U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT3_12 (number 38), P3_12/J1[12]/J5[1] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN 12U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN_MASK (1U << 12U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITLEDSPINS_LED_RED_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_PIN 12U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_RED_PIN_MASK (1U << 12U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT3_0 (number 46), P3_0/J1[8] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN 0U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN_MASK (1U << 0U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITLEDSPINS_LED_BLUE_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN 0U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLEDsPins(void); + +/*! @name PORT1_7 (number 1), P1_7/J1[1] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_SW3_GPIO GPIO1 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW3_GPIO_PIN 7U /*!<@brief GPIO pin number */ +#define BOARD_INITBUTTONSPINS_SW3_GPIO_PIN_MASK (1U << 7U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITBUTTONSPINS_SW3_PORT PORT1 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW3_PIN 7U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_SW3_PIN_MASK (1U << 7U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT1_29 (number 8), P1_29/J3[6]/J18[10] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_SW1_GPIO GPIO1 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW1_GPIO_PIN 29U /*!<@brief GPIO pin number */ +#define BOARD_INITBUTTONSPINS_SW1_GPIO_PIN_MASK (1U << 29U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITBUTTONSPINS_SW1_PORT PORT1 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW1_PIN 29U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_SW1_PIN_MASK (1U << 29U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT3_29 (number 32), P3_29/J18[7]/J4[11] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_ISP_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_ISP_GPIO_PIN 29U /*!<@brief GPIO pin number */ +#define BOARD_INITBUTTONSPINS_ISP_GPIO_PIN_MASK (1U << 29U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITBUTTONSPINS_ISP_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_ISP_PIN 29U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_ISP_PIN_MASK (1U << 29U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitBUTTONsPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c deleted file mode 100644 index 5a132dc67..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c +++ /dev/null @@ -1,466 +0,0 @@ -/* - * Copyright 2023 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ -/* - * How to setup clock using clock driver functions: - * - * 1. Setup clock sources. - * - * 2. Set up wait states of the flash. - * - * 3. Set up all dividers. - * - * 4. Set up all selectors to provide selected clocks. - * - */ - -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!GlobalInfo -product: Clocks v12.0 -processor: MCXA153 -package_id: MCXA153VLH -mcu_data: ksdk2_0 -processor_version: 0.13.0 - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -#include "fsl_clock.h" -#include "clock_config.h" -#include "fsl_spc.h" - -/******************************************************************************* - * Definitions - ******************************************************************************/ - -/******************************************************************************* - * Variables - ******************************************************************************/ -/* System clock frequency. */ -//extern uint32_t SystemCoreClock; - -/******************************************************************************* - ************************ BOARD_InitBootClocks function ************************ - ******************************************************************************/ -void BOARD_InitBootClocks(void) -{ -} - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO12M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO12M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CPU_clock.outFreq, value: 12 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: MAIN_clock.outFreq, value: 12 MHz} -- {id: Slow_clock.outFreq, value: 3 MHz} -- {id: System_clock.outFreq, value: 12 MHz} -settings: -- {id: SCGMode, value: SIRC} -- {id: FRO_HF_PERIPHERALS_EN_CFG, value: Disabled} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SCG.SCSSEL.sel, value: SCG.SIRC} -- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -void BOARD_BootClockFRO12M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO12M */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO24M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO24M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 24 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} -- {id: FRO_HF_clock.outFreq, value: 48 MHz} -- {id: MAIN_clock.outFreq, value: 48 MHz} -- {id: Slow_clock.outFreq, value: 6 MHz} -- {id: System_clock.outFreq, value: 24 MHz} -settings: -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SYSCON.AHBCLKDIV.scale, value: '2', locked: true} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -void BOARD_BootClockFRO24M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 2U); /* !< Set AHBCLKDIV divider to value 2 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO24M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO48M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO48M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 48 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} -- {id: FRO_HF_clock.outFreq, value: 48 MHz} -- {id: MAIN_clock.outFreq, value: 48 MHz} -- {id: Slow_clock.outFreq, value: 12 MHz} -- {id: System_clock.outFreq, value: 48 MHz} -settings: -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -void BOARD_BootClockFRO48M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO48M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO64M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO64M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 64 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 64 MHz} -- {id: FRO_HF_clock.outFreq, value: 64 MHz} -- {id: MAIN_clock.outFreq, value: 64 MHz} -- {id: Slow_clock.outFreq, value: 16 MHz} -- {id: System_clock.outFreq, value: 64 MHz} -settings: -- {id: VDD_CORE, value: voltage_1v1} -- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} -sources: -- {id: SCG.FIRC.outFreq, value: 64 MHz} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -void BOARD_BootClockFRO64M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFROHFClocking(64000000U); /*!< Enable FRO HF(64MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO64M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO96M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO96M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 96 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 96 MHz} -- {id: FRO_HF_clock.outFreq, value: 96 MHz} -- {id: MAIN_clock.outFreq, value: 96 MHz} -- {id: Slow_clock.outFreq, value: 24 MHz} -- {id: System_clock.outFreq, value: 96 MHz} -settings: -- {id: VDD_CORE, value: voltage_1v1} -- {id: CLKOUTDIV_HALT, value: Enable} -- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} -sources: -- {id: SCG.FIRC.outFreq, value: 96 MHz} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -void BOARD_BootClockFRO96M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFROHFClocking(96000000U); /*!< Enable FRO HF(96MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO96M_CORE_CLOCK; -} diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h deleted file mode 100644 index aae811052..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright 2023 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ - -#ifndef _CLOCK_CONFIG_H_ -#define _CLOCK_CONFIG_H_ - -#include "fsl_common.h" - -/******************************************************************************* - * Definitions - ******************************************************************************/ - -/******************************************************************************* - ************************ BOARD_InitBootClocks function ************************ - ******************************************************************************/ - -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes default configuration of clocks. - * - */ -void BOARD_InitBootClocks(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO12M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO12M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO24M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO24M_CORE_CLOCK 24000000U /*!< Core clock frequency: 24000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO24M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO48M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO48M_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO48M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO64M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO64M_CORE_CLOCK 64000000U /*!< Core clock frequency: 64000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO64M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO96M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO96M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex b/hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex new file mode 100644 index 000000000..43fea73db --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex @@ -0,0 +1,573 @@ + + + + MCXA153 + MCXA153VLH + FRDM-MCXA153 + ksdk2_0 + + + + + + + true + false + + /* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + + true + + true + true + false + + + + + + + + + 25.09.10 + + + + + + + Configures pin routing and optionally pin electrical features. + + true + cm33_core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + cm33_core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + cm33_core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + cm33_core0 + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 25.09.10 + + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + false + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + false + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + false + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + false + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + N/A + + + + + + + + + + 25.09.10 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + N/A + + + + diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c deleted file mode 100644 index 47709951b..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Copyright 2023 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ - -/* clang-format off */ -/* - * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!GlobalInfo -product: Pins v14.0 -processor: MCXA153 -package_id: MCXA153VLH -mcu_data: ksdk2_0 -processor_version: 0.14.4 - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** - */ -/* clang-format on */ - -#include "fsl_common.h" -#include "fsl_port.h" -#include "pin_mux.h" - -/* FUNCTION ************************************************************************************************************ - * - * Function Name : BOARD_InitBootPins - * Description : Calls initialization functions. - * - * END ****************************************************************************************************************/ -void BOARD_InitBootPins(void) -{ - BOARD_InitPins(); -} - -/* clang-format off */ -/* - * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -BOARD_InitPins: -- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} -- pin_list: - - {pin_num: '51', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, - drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} - - {pin_num: '52', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1, slew_rate: fast, open_drain: disable, - drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** - */ -/* clang-format on */ - -/* FUNCTION ************************************************************************************************************ - * - * Function Name : BOARD_InitPins - * Description : Configures pin routing and optionally pin electrical features. - * - * END ****************************************************************************************************************/ -void BOARD_InitPins(void) -{ - CLOCK_EnableClock(kCLOCK_GateGPIO3); - /* Write to PORT3: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT3); - /* GPIO3 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); - /* PORT3 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); - - - /* Write to PORT0: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT0); - /* LPUART0 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); - /* PORT0 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); - - const port_pin_config_t port0_2_pin51_config = {/* Internal pull-up resistor is enabled */ - kPORT_PullUp, - /* Low internal pull resistor value is selected. */ - kPORT_LowPullResistor, - /* Fast slew rate is configured */ - kPORT_FastSlewRate, - /* Passive input filter is disabled */ - kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - kPORT_OpenDrainDisable, - /* Low drive strength is configured */ - kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - kPORT_NormalDriveStrength, - /* Pin is configured as LPUART0_RXD */ - kPORT_MuxAlt2, - /* Digital input enabled */ - kPORT_InputBufferEnable, - /* Digital input is not inverted */ - kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - kPORT_UnlockRegister}; - /* PORT0_2 (pin 51) is configured as LPUART0_RXD */ - PORT_SetPinConfig(PORT0, 2U, &port0_2_pin51_config); - - const port_pin_config_t port0_3_pin52_config = {/* Internal pull-up resistor is enabled */ - kPORT_PullUp, - /* Low internal pull resistor value is selected. */ - kPORT_LowPullResistor, - /* Fast slew rate is configured */ - kPORT_FastSlewRate, - /* Passive input filter is disabled */ - kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - kPORT_OpenDrainDisable, - /* Low drive strength is configured */ - kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - kPORT_NormalDriveStrength, - /* Pin is configured as LPUART0_TXD */ - kPORT_MuxAlt2, - /* Digital input enabled */ - kPORT_InputBufferEnable, - /* Digital input is not inverted */ - kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - kPORT_UnlockRegister}; - /* PORT0_3 (pin 52) is configured as LPUART0_TXD */ - PORT_SetPinConfig(PORT0, 3U, &port0_3_pin52_config); -} -/*********************************************************************************************************************** - * EOF - **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h deleted file mode 100644 index 2c0e617a5..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2023 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ - -#ifndef _PIN_MUX_H_ -#define _PIN_MUX_H_ - -/*! - * @addtogroup pin_mux - * @{ - */ - -/*********************************************************************************************************************** - * API - **********************************************************************************************************************/ - -#if defined(__cplusplus) -extern "C" { -#endif - -/*! - * @brief Calls initialization functions. - * - */ -void BOARD_InitBootPins(void); - -/*! - * @brief Configures pin routing and optionally pin electrical features. - * - */ -void BOARD_InitPins(void); - -#if defined(__cplusplus) -} -#endif - -/*! - * @} - */ -#endif /* _PIN_MUX_H_ */ - -/*********************************************************************************************************************** - * EOF - **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c index 2dfefeb92..e1accf941 100644 --- a/hw/bsp/mcx/family.c +++ b/hw/bsp/mcx/family.c @@ -61,14 +61,9 @@ void USB0_IRQHandler(void) { void board_init(void) { - BOARD_InitPins(); - + BOARD_InitBootPins(); BOARD_InitBootClocks(); - #ifdef XTAL0_CLK_HZ - CLOCK_SetupExtClocking(XTAL0_CLK_HZ); - #endif - #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk index a16f4b6c0..4321e654a 100644 --- a/hw/bsp/mcx/family.mk +++ b/hw/bsp/mcx/family.mk @@ -11,7 +11,7 @@ CFLAGS += \ -DBOARD_TUD_RHPORT=$(PORT) \ # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration +CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration -Wno-error=redundant-decls LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs @@ -56,12 +56,9 @@ INC += \ $(TOP)/$(SDK_DIR)/drivers/ \ $(TOP)/$(SDK_DIR)/drivers/lpuart \ $(TOP)/$(SDK_DIR)/drivers/lpflexcomm \ - $(TOP)/$(SDK_DIR)/drivers/common\ - $(TOP)/$(SDK_DIR)/drivers/gpio\ - $(TOP)/$(SDK_DIR)/drivers/port\ - $(TOP)/hw/bsp/mcx/drivers/spc - - - + $(TOP)/$(SDK_DIR)/drivers/common\ + $(TOP)/$(SDK_DIR)/drivers/gpio\ + $(TOP)/$(SDK_DIR)/drivers/port\ + $(TOP)/hw/bsp/mcx/drivers/spc SRC_S += $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/startup_$(MCU_CORE).S diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 05ae6929c..002cd3a0e 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -543,6 +543,10 @@ #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + #if CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_EDPT_CLOSE_API + #endif + #elif TU_CHECK_MCU(OPT_MCU_CH32V103) #define TUP_USBIP_WCH_USBFS @@ -590,6 +594,10 @@ #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + #if CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_EDPT_CLOSE_API + #endif + //--------------------------------------------------------------------+ // Analog Devices //--------------------------------------------------------------------+ @@ -681,8 +689,7 @@ #define TU_ATTR_FAST_FUNC #endif -#if defined(TUP_USBIP_CHIPIDEA_FS) || defined(TUP_USBIP_IP3511) || defined(TUP_USBIP_RUSB2) || \ - (defined(TUP_USBIP_WCH_USBFS) && CFG_TUD_WCH_USBIP_USBFS) +#if defined(TUP_USBIP_IP3511) || defined(TUP_USBIP_RUSB2) #define TUP_DCD_EDPT_CLOSE_API #endif diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 8b5c42aa2..40ad4cf82 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -344,24 +344,21 @@ void dcd_sof_enable(uint8_t rhport, bool en) //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; - - const unsigned ep_addr = ep_desc->bEndpointAddress; - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - const unsigned xfer = ep_desc->bmAttributes.xfer; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - const unsigned odd = ep->odd; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; +static bool edpt_open(uint8_t rhport, uint8_t ep_addr, uint16_t max_packet_size, tusb_xfer_type_t xfer) { + (void)rhport; + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + const unsigned odd = ep->odd; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; /* No support for control transfer */ TU_ASSERT(epn && (xfer != TUSB_XFER_CONTROL)); - ep->max_packet_size = tu_edpt_packet_size(ep_desc); + ep->max_packet_size = max_packet_size; + unsigned val = USB_ENDPT_EPCTLDIS_MASK; - val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK: 0; + val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK : 0; val |= dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; CI_REG->EP[epn].CTL |= val; @@ -375,8 +372,27 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) return true; } -void dcd_edpt_close_all(uint8_t rhport) -{ +bool dcd_edpt_open(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + return edpt_open(rhport, ep_desc->bEndpointAddress, tu_edpt_packet_size(ep_desc), ep_desc->bmAttributes.xfer); +} + +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + return edpt_open(rhport, ep_addr, largest_packet_size, TUSB_XFER_ISOCHRONOUS); +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + const unsigned epn = tu_edpt_number(ep_desc->bEndpointAddress); + const unsigned dir = tu_edpt_dir(ep_desc->bEndpointAddress); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + + dcd_int_disable(rhport); + ep->max_packet_size = tu_edpt_packet_size(ep_desc); + dcd_int_enable(rhport); + + return true; +} + +void dcd_edpt_close_all(uint8_t rhport) { dcd_int_disable(rhport); for (unsigned i = 1; i < 16; ++i) { @@ -399,43 +415,6 @@ void dcd_edpt_close_all(uint8_t rhport) } } -#ifdef TUP_DCD_EDPT_CLOSE_API -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; - const unsigned msk = dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; - - dcd_int_disable(rhport); - - CI_REG->EP[epn].CTL &= ~msk; - ep->max_packet_size = 0; - ep->length = 0; - ep->remaining = 0; - bd[0].head = 0; - bd[1].head = 0; - - dcd_int_enable(rhport); -} - -#else - -bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { - (void) rhport; - (void) ep_addr; - (void) largest_packet_size; - return false; -} - -bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { - (void) rhport; - (void) desc_ep; - return false; -} -#endif - bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { const unsigned epn = tu_edpt_number(ep_addr); diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index da1c5c888..9edaadf58 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -355,24 +355,21 @@ void dcd_sof_enable(uint8_t rhport, bool en) //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; +static bool edpt_open(uint8_t rhport, uint8_t ep_addr, uint16_t max_packet_size, tusb_xfer_type_t xfer) { + (void)rhport; - const unsigned ep_addr = ep_desc->bEndpointAddress; - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - const unsigned xfer = ep_desc->bmAttributes.xfer; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - const unsigned odd = ep->odd; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + const unsigned odd = ep->odd; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; /* No support for control transfer */ TU_ASSERT(epn && (xfer != TUSB_XFER_CONTROL)); - ep->max_packet_size = tu_edpt_packet_size(ep_desc); - unsigned val = USB_ENDPT_EPCTLDIS_MASK; - val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK: 0; + ep->max_packet_size = max_packet_size; + unsigned val = USB_ENDPT_EPCTLDIS_MASK; + val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK : 0; val |= dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; KHCI->ENDPOINT[epn].ENDPT |= val; @@ -386,6 +383,26 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) return true; } +bool dcd_edpt_open(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + return edpt_open(rhport, ep_desc->bEndpointAddress, tu_edpt_packet_size(ep_desc), ep_desc->bmAttributes.xfer); +} + +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + return edpt_open(rhport, ep_addr, largest_packet_size, TUSB_XFER_ISOCHRONOUS); +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + const unsigned epn = tu_edpt_number(ep_desc->bEndpointAddress); + const unsigned dir = tu_edpt_dir(ep_desc->bEndpointAddress); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + + dcd_int_disable(rhport); + ep->max_packet_size = tu_edpt_packet_size(ep_desc); + dcd_int_enable(rhport); + + return true; +} + void dcd_edpt_close_all(uint8_t rhport) { (void) rhport; @@ -408,41 +425,6 @@ void dcd_edpt_close_all(uint8_t rhport) } } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; - - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; - const unsigned msk = dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; - const unsigned ie = NVIC_GetEnableIRQ(USB0_IRQn); - NVIC_DisableIRQ(USB0_IRQn); - KHCI->ENDPOINT[epn].ENDPT &= ~msk; - ep->max_packet_size = 0; - ep->length = 0; - ep->remaining = 0; - bd[0].head = 0; - bd[1].head = 0; - if (ie) NVIC_EnableIRQ(USB0_IRQn); -} - -#if 0 -bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { - (void) rhport; - (void) ep_addr; - (void) largest_packet_size; - return false; -} - -bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { - (void) rhport; - (void) desc_ep; - return false; -} - #endif - bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { (void) rhport; -- cgit v1.3.1 From 117350222301bc0c9f70104e8a1c4080c34810f2 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 17 Nov 2025 22:47:12 +0700 Subject: circcleci run all job with large, also try to fix context deadline exceeded with espressif build --- .circleci/config.yml | 18 +----------------- .circleci/config2.yml | 3 ++- 2 files changed, 3 insertions(+), 18 deletions(-) diff --git a/.circleci/config.yml b/.circleci/config.yml index 3342cbc65..580f5fe2e 100644 --- a/.circleci/config.yml +++ b/.circleci/config.yml @@ -32,8 +32,6 @@ jobs: BUILDSYSTEM_TOOLCHAIN+=("cmake arm-iar") fi - RESOURCE_LARGE='["nrf", "imxrt", "stm32f4", "stm32h7 stm32h7rs"]' - gen_build_entry() { local build_system="$1" local toolchain="$2" @@ -61,21 +59,7 @@ jobs: FAMILY=$(echo $MATRIX_JSON | jq -r ".\"$toolchain\"") echo "FAMILY_${toolchain}=$FAMILY" - # FAMILY_LARGE = FAMILY - RESOURCE_LARGE - # Separate large from medium+ resources - FAMILY_LARGE=$(jq -n --argjson family "$FAMILY" --argjson resource "$RESOURCE_LARGE" '$family | map(select(IN($resource[])))') - FAMILY=$(jq -n --argjson family "$FAMILY" --argjson resource "$RESOURCE_LARGE" '$family | map(select(IN($resource[]) | not))') - - if [[ $toolchain == esp-idf || $toolchain == arm-iar ]]; then - gen_build_entry "$build_system" "$toolchain" "$FAMILY" "large" - else - gen_build_entry "$build_system" "$toolchain" "$FAMILY" "medium+" - - # add large resources if available - if [ "$(echo $FAMILY_LARGE | jq 'length')" -gt 0 ]; then - gen_build_entry "$build_system" "$toolchain" "$FAMILY_LARGE" "large" - fi - fi + gen_build_entry "$build_system" "$toolchain" "$FAMILY" "large" done - continuation/continue: diff --git a/.circleci/config2.yml b/.circleci/config2.yml index bd2a7d02a..ab0fd7ba1 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -104,6 +104,7 @@ commands: - run: name: Build + no_output_timeout: 20m command: | if [ << parameters.toolchain >> == esp-idf ]; then docker run --rm -v $PWD:/project -w /project espressif/idf:v5.3.2 python tools/build.py << parameters.family >> @@ -127,7 +128,7 @@ jobs: parameters: resource_class: type: string - default: medium+ + default: large build-system: type: string toolchain: -- cgit v1.3.1