From 3944f1c4dab07569cb6fa781facd6afc20bbf35d Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 11:28:06 +0700 Subject: group same5x --- .codespell/ignore-words.txt | 1 + .github/workflows/build_arm.yml | 2 +- hw/bsp/d5035_01/board.mk | 61 ---- hw/bsp/d5035_01/d5035_01.c | 353 --------------------- hw/bsp/d5035_01/same51j19a_flash.ld | 164 ---------- hw/bsp/same54xplainedpro/board.mk | 48 --- hw/bsp/same54xplainedpro/same54p20a_flash.ld | 163 ---------- hw/bsp/same54xplainedpro/same54p20a_sram.ld | 162 ---------- hw/bsp/same54xplainedpro/same54xplainedpro.c | 306 ------------------ hw/bsp/same5x/boards/d5035_01/board.mk | 21 ++ hw/bsp/same5x/boards/d5035_01/d5035_01.c | 353 +++++++++++++++++++++ hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld | 164 ++++++++++ hw/bsp/same5x/boards/same54_xplained/board.mk | 12 + .../boards/same54_xplained/same54_xplained.c | 306 ++++++++++++++++++ .../boards/same54_xplained/same54p20a_flash.ld | 163 ++++++++++ .../boards/same54_xplained/same54p20a_sram.ld | 162 ++++++++++ hw/bsp/same5x/family.mk | 42 +++ 17 files changed, 1225 insertions(+), 1258 deletions(-) delete mode 100644 hw/bsp/d5035_01/board.mk delete mode 100644 hw/bsp/d5035_01/d5035_01.c delete mode 100644 hw/bsp/d5035_01/same51j19a_flash.ld delete mode 100644 hw/bsp/same54xplainedpro/board.mk delete mode 100644 hw/bsp/same54xplainedpro/same54p20a_flash.ld delete mode 100644 hw/bsp/same54xplainedpro/same54p20a_sram.ld delete mode 100644 hw/bsp/same54xplainedpro/same54xplainedpro.c create mode 100644 hw/bsp/same5x/boards/d5035_01/board.mk create mode 100644 hw/bsp/same5x/boards/d5035_01/d5035_01.c create mode 100644 hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld create mode 100644 hw/bsp/same5x/boards/same54_xplained/board.mk create mode 100644 hw/bsp/same5x/boards/same54_xplained/same54_xplained.c create mode 100644 hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld create mode 100644 hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld create mode 100644 hw/bsp/same5x/family.mk diff --git a/.codespell/ignore-words.txt b/.codespell/ignore-words.txt index fc14fe417..5c89bae1c 100644 --- a/.codespell/ignore-words.txt +++ b/.codespell/ignore-words.txt @@ -9,3 +9,4 @@ te attch endianess pris +busses diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index f63f637b1..905cc4f9a 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -41,7 +41,7 @@ jobs: - 'nrf' - 'ra' - 'rp2040' - - 'samd11' + - 'samd11 same5x' - 'samd21' - 'samd51' - 'saml2x' diff --git a/hw/bsp/d5035_01/board.mk b/hw/bsp/d5035_01/board.mk deleted file mode 100644 index fc196b339..000000000 --- a/hw/bsp/d5035_01/board.mk +++ /dev/null @@ -1,61 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/microchip -HWREV ?= 1 - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mlong-calls \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__SAME51J19A__ \ - -DCONF_CPU_FREQUENCY=80000000 \ - -DCONF_GCLK_USB_FREQUENCY=48000000 \ - -DCFG_TUSB_MCU=OPT_MCU_SAME5X \ - -DD5035_01=1 \ - -DBOARD_NAME="\"D5035-01\"" \ - -DSVC_Handler=SVCall_Handler \ - -DHWREV=$(HWREV) - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-qual - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/same51j19a_flash.ld - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/same51/gcc/gcc/startup_same51.c \ - hw/mcu/microchip/same51/gcc/system_same51.c - -ifdef SYSCALLS -ifneq ($(SYSCALLS),0) - SRC_C += hw/mcu/microchip/same51/hal/utils/src/utils_syscalls.c -endif -endif - -ifdef LOG -ifneq ($(LOG),0) - SRC_C += hw/mcu/microchip/same51/hal/utils/src/utils_syscalls.c -endif -endif - -INC += \ - $(TOP)/hw/mcu/microchip/same51/ \ - $(TOP)/hw/mcu/microchip/same51/config \ - $(TOP)/hw/mcu/microchip/same51/include \ - $(TOP)/hw/mcu/microchip/same51/hal/include \ - $(TOP)/hw/mcu/microchip/same51/hal/utils/include \ - $(TOP)/hw/mcu/microchip/same51/hpl/port \ - $(TOP)/hw/mcu/microchip/same51/hri \ - $(TOP)/hw/mcu/microchip/same51/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = ATSAME51J19 - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/d5035_01/d5035_01.c b/hw/bsp/d5035_01/d5035_01.c deleted file mode 100644 index f356851f7..000000000 --- a/hw/bsp/d5035_01/d5035_01.c +++ /dev/null @@ -1,353 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 Jean Gressmann - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include -#include "bsp/board.h" - -#include - -#if CONF_CPU_FREQUENCY != 80000000 -# error "CONF_CPU_FREQUENCY" must 80000000 -#endif - -#if CONF_GCLK_USB_FREQUENCY != 48000000 -# error "CONF_GCLK_USB_FREQUENCY" must 48000000 -#endif - -#if !defined(HWREV) -# error Define "HWREV" -#endif - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_0_Handler (void) -{ - tud_int_handler(0); -} - -void USB_1_Handler (void) -{ - tud_int_handler(0); -} - -void USB_2_Handler (void) -{ - tud_int_handler(0); -} - -void USB_3_Handler (void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define LED_PIN PIN_PA02 - -#if HWREV < 3 -# define BOARD_SERCOM SERCOM5 -#else -# define BOARD_SERCOM SERCOM0 -#endif - -static inline void init_clock(void) -{ - /* AUTOWS is enabled by default in REG_NVMCTRL_CTRLA - no need to change the number of wait states when changing the core clock */ -#if HWREV == 1 - /* configure XOSC1 for a 16MHz crystal connected to XIN1/XOUT1 */ - OSCCTRL->XOSCCTRL[1].reg = - OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms - OSCCTRL_XOSCCTRL_RUNSTDBY | - OSCCTRL_XOSCCTRL_ENALC | - OSCCTRL_XOSCCTRL_IMULT(4) | - OSCCTRL_XOSCCTRL_IPTAT(3) | - OSCCTRL_XOSCCTRL_XTALEN | - OSCCTRL_XOSCCTRL_ENABLE; - while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); - - OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 8, input = XOSC1 */ - OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ - OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ - - OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 16, input = XOSC1 */ - OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ - OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ -#else // HWREV >= 1 - /* configure XOSC0 for a 16MHz crystal connected to XIN0/XOUT0 */ - OSCCTRL->XOSCCTRL[0].reg = - OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms - OSCCTRL_XOSCCTRL_RUNSTDBY | - OSCCTRL_XOSCCTRL_ENALC | - OSCCTRL_XOSCCTRL_IMULT(4) | - OSCCTRL_XOSCCTRL_IPTAT(3) | - OSCCTRL_XOSCCTRL_XTALEN | - OSCCTRL_XOSCCTRL_ENABLE; - while(0 == OSCCTRL->STATUS.bit.XOSCRDY0); - - OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 8, input = XOSC1 */ - OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ - OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ - - OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 16, input = XOSC1 */ - OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ - OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ -#endif // HWREV - - /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ - GCLK->GENCTRL[0].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL0 | /* DPLL0 */ - GCLK_GENCTRL_IDC ; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ - - /* configure clock-generator 1 to use DPLL1 as source -> for use with some peripheral */ - GCLK->GENCTRL[1].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL1 | - GCLK_GENCTRL_IDC ; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL1); /* wait for the synchronization between clock domains to be complete */ - - /* configure clock-generator 2 to use DPLL0 as source -> for use with SERCOM */ - GCLK->GENCTRL[2].reg = - GCLK_GENCTRL_DIV(1) | /* 80MHz */ - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL0 | - GCLK_GENCTRL_IDC ; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ -} - -static inline void uart_init(void) -{ -#if HWREV < 3 - /* configure SERCOM5 on PB02 */ - PORT->Group[1].WRCONFIG.reg = - PORT_WRCONFIG_WRPINCFG | - PORT_WRCONFIG_WRPMUX | - PORT_WRCONFIG_PMUX(3) | /* function D */ - PORT_WRCONFIG_DRVSTR | - PORT_WRCONFIG_PINMASK(0x0004) | /* PB02 */ - PORT_WRCONFIG_PMUXEN; - - MCLK->APBDMASK.bit.SERCOM5_ = 1; - GCLK->PCHCTRL[SERCOM5_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ - - SERCOM5->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ - while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); - - SERCOM5->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ - SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ -// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ - SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ - - SERCOM5->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ - SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ - SERCOM5->USART.CTRLC.reg = 0x00; - // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E - SERCOM5->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); - -// SERCOM5->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; - SERCOM5->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -#else -/* configure SERCOM0 on PA08 */ - PORT->Group[0].WRCONFIG.reg = - PORT_WRCONFIG_WRPINCFG | - PORT_WRCONFIG_WRPMUX | - PORT_WRCONFIG_PMUX(2) | /* function C */ - PORT_WRCONFIG_DRVSTR | - PORT_WRCONFIG_PINMASK(0x0100) | /* PA08 */ - PORT_WRCONFIG_PMUXEN; - - MCLK->APBAMASK.bit.SERCOM0_ = 1; - GCLK->PCHCTRL[SERCOM0_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ - - SERCOM0->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ - while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); - - SERCOM0->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ - SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ -// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ - SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ - - SERCOM0->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ - SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ - SERCOM0->USART.CTRLC.reg = 0x00; - // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E - SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); - -// SERCOM0->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; - SERCOM0->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -#endif -} - -static inline void uart_send_buffer(uint8_t const *text, size_t len) -{ - for (size_t i = 0; i < len; ++i) { - BOARD_SERCOM->USART.DATA.reg = text[i]; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); - } -} - -static inline void uart_send_str(const char* text) -{ - while (*text) { - BOARD_SERCOM->USART.DATA.reg = *text++; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); - } -} - - -void board_init(void) -{ - init_clock(); - - SystemCoreClock = CONF_CPU_FREQUENCY; - -#if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - uart_init(); -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " UART initialized\n"); - tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); -#endif - - // Led init - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_level(LED_PIN, 0); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " LED pin configured\n"); -#endif - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - -#if CFG_TUD_ENABLED -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device enabled\n"); -#endif - - /* USB clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); - hri_mclk_set_AHBMASK_USB_bit(MCLK); - hri_mclk_set_APBBMASK_USB_bit(MCLK); - - // USB pin init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); - - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device configured\n"); -#endif -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // this board has no button - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - if (len < 0) { - uart_send_str(buf); - } else { - uart_send_buffer(buf, len); - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/d5035_01/same51j19a_flash.ld b/hw/bsp/d5035_01/same51j19a_flash.ld deleted file mode 100644 index a8dd44336..000000000 --- a/hw/bsp/d5035_01/same51j19a_flash.ld +++ /dev/null @@ -1,164 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAME51J19A - * - * Copyright (c) 2019 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x1000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; - end = .; -} diff --git a/hw/bsp/same54xplainedpro/board.mk b/hw/bsp/same54xplainedpro/board.mk deleted file mode 100644 index 1c6732231..000000000 --- a/hw/bsp/same54xplainedpro/board.mk +++ /dev/null @@ -1,48 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/microchip - -CONF_CPU_FREQUENCY ?= 48000000 - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mlong-calls \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__SAME54P20A__ \ - -DCONF_CPU_FREQUENCY=$(CONF_CPU_FREQUENCY) \ - -DCFG_TUSB_MCU=OPT_MCU_SAME5X \ - -DBOARD_NAME="\"Microchip SAM E54 Xplained Pro\"" - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-qual - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/same54p20a_flash.ld - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/same54/gcc/gcc/startup_same54.c \ - hw/mcu/microchip/same54/gcc/system_same54.c \ - hw/mcu/microchip/same54/hal/utils/src/utils_syscalls.c - -INC += \ - $(TOP)/hw/mcu/microchip/same54/ \ - $(TOP)/hw/mcu/microchip/same54/config \ - $(TOP)/hw/mcu/microchip/same54/include \ - $(TOP)/hw/mcu/microchip/same54/hal/include \ - $(TOP)/hw/mcu/microchip/same54/hal/utils/include \ - $(TOP)/hw/mcu/microchip/same54/hpl/port \ - $(TOP)/hw/mcu/microchip/same54/hri \ - $(TOP)/hw/mcu/microchip/same54/CMSIS/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = ATSAME54P20 - -# flash using edbg from https://github.com/ataradov/edbg -flash: $(BUILD)/$(PROJECT).bin - edbg --verbose -t same54 -pv -f $< diff --git a/hw/bsp/same54xplainedpro/same54p20a_flash.ld b/hw/bsp/same54xplainedpro/same54p20a_flash.ld deleted file mode 100644 index 1f427a066..000000000 --- a/hw/bsp/same54xplainedpro/same54p20a_flash.ld +++ /dev/null @@ -1,163 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAME54P20A - * - * Copyright (c) 2019 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/same54xplainedpro/same54p20a_sram.ld b/hw/bsp/same54xplainedpro/same54p20a_sram.ld deleted file mode 100644 index e6e33ec48..000000000 --- a/hw/bsp/same54xplainedpro/same54p20a_sram.ld +++ /dev/null @@ -1,162 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal SRAM on the SAME54P20A - * - * Copyright (c) 2019 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > ram - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > ram - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/same54xplainedpro/same54xplainedpro.c b/hw/bsp/same54xplainedpro/same54xplainedpro.c deleted file mode 100644 index ba1eec38b..000000000 --- a/hw/bsp/same54xplainedpro/same54xplainedpro.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021 Jean Gressmann - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include -#include "bsp/board.h" - -#include - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_0_Handler(void) -{ - tud_int_handler(0); -} - -void USB_1_Handler(void) -{ - tud_int_handler(0); -} - -void USB_2_Handler(void) -{ - tud_int_handler(0); -} - -void USB_3_Handler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define LED_PIN PIN_PC18 -#define BUTTON_PIN PIN_PB31 -#define BOARD_SERCOM SERCOM2 - -/** Initializes the clocks from the external 12 MHz crystal - * - * The goal of this setup is to preserve the second PLL - * for the application code while still having a reasonable - * 48 MHz clock for USB / UART. - * - * GCLK0: CONF_CPU_FREQUENCY (default 120 MHz) from PLL0 - * GCLK1: unused - * GCLK2: 12 MHz from XOSC1 - * DFLL48M: closed loop from GLCK2 - * GCLK3: 48 MHz - */ -static inline void init_clock_xtal(void) -{ - /* configure for a 12MHz crystal connected to XIN1/XOUT1 */ - OSCCTRL->XOSCCTRL[1].reg = - OSCCTRL_XOSCCTRL_STARTUP(6) | // 1.953 ms - OSCCTRL_XOSCCTRL_RUNSTDBY | - OSCCTRL_XOSCCTRL_ENALC | - OSCCTRL_XOSCCTRL_IMULT(4) | OSCCTRL_XOSCCTRL_IPTAT(3) | // 8MHz to 16MHz - OSCCTRL_XOSCCTRL_XTALEN | - OSCCTRL_XOSCCTRL_ENABLE; - while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); - - OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(2) | OSCCTRL_DPLLCTRLB_REFCLK_XOSC1; /* 12MHz / 6 = 2Mhz, input = XOSC1 */ - OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR((CONF_CPU_FREQUENCY / 1000000 / 2) - 1); /* multiply to get CONF_CPU_FREQUENCY (default = 120MHz) */ - OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ - - /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ - GCLK->GENCTRL[0].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL0 | - GCLK_GENCTRL_IDC; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ - - // configure GCLK2 for 12MHz from XOSC1 - GCLK->GENCTRL[2].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_XOSC1 | - GCLK_GENCTRL_IDC; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ - - /* setup DFLL48M to use GLCK2 */ - GCLK->PCHCTRL[OSCCTRL_GCLK_ID_DFLL48].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; - - OSCCTRL->DFLLCTRLA.reg = 0; - while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); - - OSCCTRL->DFLLCTRLB.reg = OSCCTRL_DFLLCTRLB_MODE | OSCCTRL_DFLLCTRLB_WAITLOCK; - OSCCTRL->DFLLMUL.bit.MUL = 4; // 4 * 12MHz -> 48MHz - - OSCCTRL->DFLLCTRLA.reg = - OSCCTRL_DFLLCTRLA_ENABLE | - OSCCTRL_DFLLCTRLA_RUNSTDBY; - while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); - - // setup 48 MHz GCLK3 from DFLL48M - GCLK->GENCTRL[3].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DFLL | - GCLK_GENCTRL_IDC; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL3); -} - -/* Initialize SERCOM2 for 115200 bps 8N1 using a 48 MHz clock */ -static inline void uart_init(void) -{ - gpio_set_pin_function(PIN_PB24, PINMUX_PB24D_SERCOM2_PAD1); - gpio_set_pin_function(PIN_PB25, PINMUX_PB25D_SERCOM2_PAD0); - - MCLK->APBBMASK.bit.SERCOM2_ = 1; - GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN; - - BOARD_SERCOM->USART.CTRLA.bit.SWRST = 1; /* reset and disable SERCOM -> enable configuration */ - while (BOARD_SERCOM->USART.SYNCBUSY.bit.SWRST); - - BOARD_SERCOM->USART.CTRLA.reg = - SERCOM_USART_CTRLA_SAMPR(0) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ - SERCOM_USART_CTRLA_SAMPA(0) | /* 16x over sampling */ - SERCOM_USART_CTRLA_FORM(0) | /* 0x0 USART frame, 0x1 USART frame with parity, ... */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0x0 USART with external clock, 0x1 USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ - SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ - - BOARD_SERCOM->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ - SERCOM_USART_CTRLB_TXEN | /* transmitter enabled */ - SERCOM_USART_CTRLB_RXEN; /* receiver enabled */ - // BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); /* 48000000/(16*115200) = 26.041666667 */ - BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_BAUD(63019); /* 65536*(1−16*115200/48000000) */ - - BOARD_SERCOM->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while (BOARD_SERCOM->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -} - -static inline void uart_send_buffer(uint8_t const *text, size_t len) -{ - for (size_t i = 0; i < len; ++i) { - BOARD_SERCOM->USART.DATA.reg = text[i]; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); - } -} - -static inline void uart_send_str(const char* text) -{ - while (*text) { - BOARD_SERCOM->USART.DATA.reg = *text++; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); - } -} - - -void board_init(void) -{ - // Uncomment this line and change the GCLK for UART/USB to run off the XTAL. - // init_clock_xtal(); - - SystemCoreClock = CONF_CPU_FREQUENCY; - -#if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - uart_init(); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " UART initialized\n"); - tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); -#endif - - // LED0 init - gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - board_led_write(0); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " LED pin configured\n"); -#endif - - // BTN0 init - gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " Button pin configured\n"); -#endif - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - -#if CFG_TUD_ENABLED -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device enabled\n"); -#endif - - /* USB clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. - */ - hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK0_Val | GCLK_PCHCTRL_CHEN); - hri_mclk_set_AHBMASK_USB_bit(MCLK); - hri_mclk_set_APBBMASK_USB_bit(MCLK); - - // USB pin init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); - - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device configured\n"); -#endif -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, !state); -} - -uint32_t board_button_read(void) -{ - return (PORT->Group[1].IN.reg & 0x80000000) != 0x80000000; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - if (len < 0) { - uart_send_str(buf); - } else { - uart_send_buffer(buf, len); - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/same5x/boards/d5035_01/board.mk b/hw/bsp/same5x/boards/d5035_01/board.mk new file mode 100644 index 000000000..c53411bb8 --- /dev/null +++ b/hw/bsp/same5x/boards/d5035_01/board.mk @@ -0,0 +1,21 @@ +MCU = same51 + +HWREV ?= 1 + +CFLAGS += \ + -D__SAME51J19A__ \ + -DCONF_CPU_FREQUENCY=80000000 \ + -DCONF_GCLK_USB_FREQUENCY=48000000 \ + -DD5035_01=1 \ + -DBOARD_NAME="\"D5035-01\"" \ + -DSVC_Handler=SVCall_Handler \ + -DHWREV=$(HWREV) + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/same51j19a_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAME51J19 + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/same5x/boards/d5035_01/d5035_01.c b/hw/bsp/same5x/boards/d5035_01/d5035_01.c new file mode 100644 index 000000000..f356851f7 --- /dev/null +++ b/hw/bsp/same5x/boards/d5035_01/d5035_01.c @@ -0,0 +1,353 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Jean Gressmann + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include +#include "bsp/board.h" + +#include + +#if CONF_CPU_FREQUENCY != 80000000 +# error "CONF_CPU_FREQUENCY" must 80000000 +#endif + +#if CONF_GCLK_USB_FREQUENCY != 48000000 +# error "CONF_GCLK_USB_FREQUENCY" must 48000000 +#endif + +#if !defined(HWREV) +# error Define "HWREV" +#endif + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_0_Handler (void) +{ + tud_int_handler(0); +} + +void USB_1_Handler (void) +{ + tud_int_handler(0); +} + +void USB_2_Handler (void) +{ + tud_int_handler(0); +} + +void USB_3_Handler (void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +#define LED_PIN PIN_PA02 + +#if HWREV < 3 +# define BOARD_SERCOM SERCOM5 +#else +# define BOARD_SERCOM SERCOM0 +#endif + +static inline void init_clock(void) +{ + /* AUTOWS is enabled by default in REG_NVMCTRL_CTRLA - no need to change the number of wait states when changing the core clock */ +#if HWREV == 1 + /* configure XOSC1 for a 16MHz crystal connected to XIN1/XOUT1 */ + OSCCTRL->XOSCCTRL[1].reg = + OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms + OSCCTRL_XOSCCTRL_RUNSTDBY | + OSCCTRL_XOSCCTRL_ENALC | + OSCCTRL_XOSCCTRL_IMULT(4) | + OSCCTRL_XOSCCTRL_IPTAT(3) | + OSCCTRL_XOSCCTRL_XTALEN | + OSCCTRL_XOSCCTRL_ENABLE; + while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); + + OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 8, input = XOSC1 */ + OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ + OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ + + OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 16, input = XOSC1 */ + OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ + OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ +#else // HWREV >= 1 + /* configure XOSC0 for a 16MHz crystal connected to XIN0/XOUT0 */ + OSCCTRL->XOSCCTRL[0].reg = + OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms + OSCCTRL_XOSCCTRL_RUNSTDBY | + OSCCTRL_XOSCCTRL_ENALC | + OSCCTRL_XOSCCTRL_IMULT(4) | + OSCCTRL_XOSCCTRL_IPTAT(3) | + OSCCTRL_XOSCCTRL_XTALEN | + OSCCTRL_XOSCCTRL_ENABLE; + while(0 == OSCCTRL->STATUS.bit.XOSCRDY0); + + OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 8, input = XOSC1 */ + OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ + OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ + + OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 16, input = XOSC1 */ + OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ + OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ +#endif // HWREV + + /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ + GCLK->GENCTRL[0].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL0 | /* DPLL0 */ + GCLK_GENCTRL_IDC ; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ + + /* configure clock-generator 1 to use DPLL1 as source -> for use with some peripheral */ + GCLK->GENCTRL[1].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL1 | + GCLK_GENCTRL_IDC ; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL1); /* wait for the synchronization between clock domains to be complete */ + + /* configure clock-generator 2 to use DPLL0 as source -> for use with SERCOM */ + GCLK->GENCTRL[2].reg = + GCLK_GENCTRL_DIV(1) | /* 80MHz */ + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL0 | + GCLK_GENCTRL_IDC ; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ +} + +static inline void uart_init(void) +{ +#if HWREV < 3 + /* configure SERCOM5 on PB02 */ + PORT->Group[1].WRCONFIG.reg = + PORT_WRCONFIG_WRPINCFG | + PORT_WRCONFIG_WRPMUX | + PORT_WRCONFIG_PMUX(3) | /* function D */ + PORT_WRCONFIG_DRVSTR | + PORT_WRCONFIG_PINMASK(0x0004) | /* PB02 */ + PORT_WRCONFIG_PMUXEN; + + MCLK->APBDMASK.bit.SERCOM5_ = 1; + GCLK->PCHCTRL[SERCOM5_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ + + SERCOM5->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ + while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); + + SERCOM5->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ + SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ +// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + SERCOM5->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ + SERCOM5->USART.CTRLC.reg = 0x00; + // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E + SERCOM5->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); + +// SERCOM5->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; + SERCOM5->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +#else +/* configure SERCOM0 on PA08 */ + PORT->Group[0].WRCONFIG.reg = + PORT_WRCONFIG_WRPINCFG | + PORT_WRCONFIG_WRPMUX | + PORT_WRCONFIG_PMUX(2) | /* function C */ + PORT_WRCONFIG_DRVSTR | + PORT_WRCONFIG_PINMASK(0x0100) | /* PA08 */ + PORT_WRCONFIG_PMUXEN; + + MCLK->APBAMASK.bit.SERCOM0_ = 1; + GCLK->PCHCTRL[SERCOM0_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ + + SERCOM0->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ + while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); + + SERCOM0->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ + SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ +// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + SERCOM0->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ + SERCOM0->USART.CTRLC.reg = 0x00; + // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E + SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); + +// SERCOM0->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; + SERCOM0->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +#endif +} + +static inline void uart_send_buffer(uint8_t const *text, size_t len) +{ + for (size_t i = 0; i < len; ++i) { + BOARD_SERCOM->USART.DATA.reg = text[i]; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); + } +} + +static inline void uart_send_str(const char* text) +{ + while (*text) { + BOARD_SERCOM->USART.DATA.reg = *text++; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); + } +} + + +void board_init(void) +{ + init_clock(); + + SystemCoreClock = CONF_CPU_FREQUENCY; + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#endif + + uart_init(); +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " UART initialized\n"); + tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); +#endif + + // Led init + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_level(LED_PIN, 0); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " LED pin configured\n"); +#endif + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + +#if CFG_TUD_ENABLED +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device enabled\n"); +#endif + + /* USB clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. */ + hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); + hri_mclk_set_AHBMASK_USB_bit(MCLK); + hri_mclk_set_APBBMASK_USB_bit(MCLK); + + // USB pin init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); + + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device configured\n"); +#endif +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // this board has no button + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + if (len < 0) { + uart_send_str(buf); + } else { + uart_send_buffer(buf, len); + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld b/hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld new file mode 100644 index 000000000..a8dd44336 --- /dev/null +++ b/hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld @@ -0,0 +1,164 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAME51J19A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x1000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; + end = .; +} diff --git a/hw/bsp/same5x/boards/same54_xplained/board.mk b/hw/bsp/same5x/boards/same54_xplained/board.mk new file mode 100644 index 000000000..41cf95bfc --- /dev/null +++ b/hw/bsp/same5x/boards/same54_xplained/board.mk @@ -0,0 +1,12 @@ +MCU = same54 + +CFLAGS += \ + -DCONF_CPU_FREQUENCY=48000000 \ + -D__SAME54P20A__ \ + -DBOARD_NAME="\"Microchip SAM E54 Xplained Pro\"" + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/same54p20a_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAME54P20 diff --git a/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c b/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c new file mode 100644 index 000000000..ba1eec38b --- /dev/null +++ b/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c @@ -0,0 +1,306 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021 Jean Gressmann + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include +#include "bsp/board.h" + +#include + + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_0_Handler(void) +{ + tud_int_handler(0); +} + +void USB_1_Handler(void) +{ + tud_int_handler(0); +} + +void USB_2_Handler(void) +{ + tud_int_handler(0); +} + +void USB_3_Handler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +#define LED_PIN PIN_PC18 +#define BUTTON_PIN PIN_PB31 +#define BOARD_SERCOM SERCOM2 + +/** Initializes the clocks from the external 12 MHz crystal + * + * The goal of this setup is to preserve the second PLL + * for the application code while still having a reasonable + * 48 MHz clock for USB / UART. + * + * GCLK0: CONF_CPU_FREQUENCY (default 120 MHz) from PLL0 + * GCLK1: unused + * GCLK2: 12 MHz from XOSC1 + * DFLL48M: closed loop from GLCK2 + * GCLK3: 48 MHz + */ +static inline void init_clock_xtal(void) +{ + /* configure for a 12MHz crystal connected to XIN1/XOUT1 */ + OSCCTRL->XOSCCTRL[1].reg = + OSCCTRL_XOSCCTRL_STARTUP(6) | // 1.953 ms + OSCCTRL_XOSCCTRL_RUNSTDBY | + OSCCTRL_XOSCCTRL_ENALC | + OSCCTRL_XOSCCTRL_IMULT(4) | OSCCTRL_XOSCCTRL_IPTAT(3) | // 8MHz to 16MHz + OSCCTRL_XOSCCTRL_XTALEN | + OSCCTRL_XOSCCTRL_ENABLE; + while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); + + OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(2) | OSCCTRL_DPLLCTRLB_REFCLK_XOSC1; /* 12MHz / 6 = 2Mhz, input = XOSC1 */ + OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR((CONF_CPU_FREQUENCY / 1000000 / 2) - 1); /* multiply to get CONF_CPU_FREQUENCY (default = 120MHz) */ + OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ + + /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ + GCLK->GENCTRL[0].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL0 | + GCLK_GENCTRL_IDC; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ + + // configure GCLK2 for 12MHz from XOSC1 + GCLK->GENCTRL[2].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_XOSC1 | + GCLK_GENCTRL_IDC; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ + + /* setup DFLL48M to use GLCK2 */ + GCLK->PCHCTRL[OSCCTRL_GCLK_ID_DFLL48].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; + + OSCCTRL->DFLLCTRLA.reg = 0; + while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); + + OSCCTRL->DFLLCTRLB.reg = OSCCTRL_DFLLCTRLB_MODE | OSCCTRL_DFLLCTRLB_WAITLOCK; + OSCCTRL->DFLLMUL.bit.MUL = 4; // 4 * 12MHz -> 48MHz + + OSCCTRL->DFLLCTRLA.reg = + OSCCTRL_DFLLCTRLA_ENABLE | + OSCCTRL_DFLLCTRLA_RUNSTDBY; + while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); + + // setup 48 MHz GCLK3 from DFLL48M + GCLK->GENCTRL[3].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DFLL | + GCLK_GENCTRL_IDC; + while(1 == GCLK->SYNCBUSY.bit.GENCTRL3); +} + +/* Initialize SERCOM2 for 115200 bps 8N1 using a 48 MHz clock */ +static inline void uart_init(void) +{ + gpio_set_pin_function(PIN_PB24, PINMUX_PB24D_SERCOM2_PAD1); + gpio_set_pin_function(PIN_PB25, PINMUX_PB25D_SERCOM2_PAD0); + + MCLK->APBBMASK.bit.SERCOM2_ = 1; + GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN; + + BOARD_SERCOM->USART.CTRLA.bit.SWRST = 1; /* reset and disable SERCOM -> enable configuration */ + while (BOARD_SERCOM->USART.SYNCBUSY.bit.SWRST); + + BOARD_SERCOM->USART.CTRLA.reg = + SERCOM_USART_CTRLA_SAMPR(0) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ + SERCOM_USART_CTRLA_SAMPA(0) | /* 16x over sampling */ + SERCOM_USART_CTRLA_FORM(0) | /* 0x0 USART frame, 0x1 USART frame with parity, ... */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0x0 USART with external clock, 0x1 USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + BOARD_SERCOM->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN | /* transmitter enabled */ + SERCOM_USART_CTRLB_RXEN; /* receiver enabled */ + // BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); /* 48000000/(16*115200) = 26.041666667 */ + BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_BAUD(63019); /* 65536*(1−16*115200/48000000) */ + + BOARD_SERCOM->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while (BOARD_SERCOM->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +} + +static inline void uart_send_buffer(uint8_t const *text, size_t len) +{ + for (size_t i = 0; i < len; ++i) { + BOARD_SERCOM->USART.DATA.reg = text[i]; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); + } +} + +static inline void uart_send_str(const char* text) +{ + while (*text) { + BOARD_SERCOM->USART.DATA.reg = *text++; + while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); + } +} + + +void board_init(void) +{ + // Uncomment this line and change the GCLK for UART/USB to run off the XTAL. + // init_clock_xtal(); + + SystemCoreClock = CONF_CPU_FREQUENCY; + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#endif + + uart_init(); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " UART initialized\n"); + tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); +#endif + + // LED0 init + gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + board_led_write(0); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " LED pin configured\n"); +#endif + + // BTN0 init + gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " Button pin configured\n"); +#endif + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + +#if CFG_TUD_ENABLED +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device enabled\n"); +#endif + + /* USB clock init + * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock + * for low speed and full speed operation. + */ + hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK0_Val | GCLK_PCHCTRL_CHEN); + hri_mclk_set_AHBMASK_USB_bit(MCLK); + hri_mclk_set_APBBMASK_USB_bit(MCLK); + + // USB pin init + gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA24, false); + gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); + gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA25, false); + gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); + + gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); + gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); + + +#if CFG_TUSB_DEBUG >= 2 + uart_send_str(BOARD_NAME " USB device configured\n"); +#endif +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + gpio_set_pin_level(LED_PIN, !state); +} + +uint32_t board_button_read(void) +{ + return (PORT->Group[1].IN.reg & 0x80000000) != 0x80000000; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + if (len < 0) { + uart_send_str(buf); + } else { + uart_send_buffer(buf, len); + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld b/hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld new file mode 100644 index 000000000..1f427a066 --- /dev/null +++ b/hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld @@ -0,0 +1,163 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAME54P20A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld b/hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld new file mode 100644 index 000000000..e6e33ec48 --- /dev/null +++ b/hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld @@ -0,0 +1,162 @@ +/** + * \file + * + * \brief Linker script for running in internal SRAM on the SAME54P20A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x10000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > ram + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > ram + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/same5x/family.mk b/hw/bsp/same5x/family.mk new file mode 100644 index 000000000..7f8692c97 --- /dev/null +++ b/hw/bsp/same5x/family.mk @@ -0,0 +1,42 @@ +DEPS_SUBMODULES += hw/mcu/microchip + +SDK_DIR = hw/mcu/microchip/$(MCU) +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mlong-calls \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_SAME5X + +# suppress warning caused by vendor mcu driver +#CFLAGS += -Wno-error=cast-qual + +SRC_C += \ + src/portable/microchip/samd/dcd_samd.c \ + $(SDK_DIR)/gcc/gcc/startup_$(MCU).c \ + $(SDK_DIR)/gcc/system_$(MCU).c \ + $(SDK_DIR)/hal/utils/src/utils_syscalls.c + +INC += \ + $(TOP)/$(SDK_DIR) \ + $(TOP)/$(SDK_DIR)/config \ + $(TOP)/$(SDK_DIR)/include \ + $(TOP)/$(SDK_DIR)/hal/include \ + $(TOP)/$(SDK_DIR)/hal/utils/include \ + $(TOP)/$(SDK_DIR)/hpl/port \ + $(TOP)/$(SDK_DIR)/hri \ + $(TOP)/$(SDK_DIR)/CMSIS/Include + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F + +# flash using edbg from https://github.com/ataradov/edbg +flash-edbg: $(BUILD)/$(PROJECT).bin + edbg --verbose -t $(MCU) -pv -f $< + +flash: flash-edbg -- cgit v1.3.1 From ab0da3c30baab6eb63e55217f2b4d5a719fb86e4 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 12:01:33 +0700 Subject: group stm32l0 --- .github/workflows/build_arm.yml | 2 +- hw/bsp/stm32l0/boards/stm32l052dap52/board.mk | 3 +- .../boards/stm32l0538disco/STM32L053C8Tx_FLASH.ld | 167 +++++++++++ hw/bsp/stm32l0/boards/stm32l0538disco/board.h | 109 +++++++ hw/bsp/stm32l0/boards/stm32l0538disco/board.mk | 14 + hw/bsp/stm32l0/family.c | 32 +- hw/bsp/stm32l0/family.mk | 13 +- hw/bsp/stm32l0/stm32l0xx_hal_conf.h | 90 ++++-- hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld | 167 ----------- hw/bsp/stm32l0538disco/board.mk | 54 ---- hw/bsp/stm32l0538disco/stm32l0538disco.c | 206 ------------- hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h | 331 --------------------- 12 files changed, 381 insertions(+), 807 deletions(-) create mode 100644 hw/bsp/stm32l0/boards/stm32l0538disco/STM32L053C8Tx_FLASH.ld create mode 100644 hw/bsp/stm32l0/boards/stm32l0538disco/board.h create mode 100644 hw/bsp/stm32l0/boards/stm32l0538disco/board.mk delete mode 100644 hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld delete mode 100644 hw/bsp/stm32l0538disco/board.mk delete mode 100644 hw/bsp/stm32l0538disco/stm32l0538disco.c delete mode 100644 hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 905cc4f9a..3abfd50a8 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -50,7 +50,7 @@ jobs: - 'stm32f7' - 'stm32g4 stm32wb' - 'stm32h7' - - 'stm32l4' + - 'stm32l0 stm32l4' - 'tm4c123 xmc4000' steps: - name: Setup Python diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk b/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk index 84662344d..0b1348474 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk @@ -1,4 +1,5 @@ -CFLAGS += -DSTM32L052xx -DCFG_EXAMPLE_VIDEO_READONLY +CFLAGS += \ + -DSTM32L052xx LD_FILE = $(BOARD_PATH)/STM32L052K8Ux_FLASH.ld diff --git a/hw/bsp/stm32l0/boards/stm32l0538disco/STM32L053C8Tx_FLASH.ld b/hw/bsp/stm32l0/boards/stm32l0538disco/STM32L053C8Tx_FLASH.ld new file mode 100644 index 000000000..033dcc0ad --- /dev/null +++ b/hw/bsp/stm32l0/boards/stm32l0538disco/STM32L053C8Tx_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32L053C8Tx Device with +** 64KByte FLASH, 8KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20002000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x200; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32l0/boards/stm32l0538disco/board.h b/hw/bsp/stm32l0/boards/stm32l0538disco/board.h new file mode 100644 index 000000000..0722e3102 --- /dev/null +++ b/hw/bsp/stm32l0/boards/stm32l0538disco/board.h @@ -0,0 +1,109 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_5 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART +//#define UART_DEV USART2 +//#define UART_CLK_EN __HAL_RCC_USART2_CLK_ENABLE +//#define UART_GPIO_PORT GPIOA +//#define UART_GPIO_AF GPIO_AF4_USART2 +//#define UART_TX_PIN GPIO_PIN_2 +//#define UART_RX_PIN GPIO_PIN_3 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32l0_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + static RCC_CRSInitTypeDef RCC_CRSInitStruct; + + /* Enable HSI Oscillator to be used as System clock source + Enable HSI48 Oscillator to be used as USB clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select HSI48 as USB clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 + clock dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); + + /*Configure the clock recovery system (CRS)**********************************/ + + /*Enable CRS Clock*/ + __HAL_RCC_CRS_CLK_ENABLE(); + + /* Default Synchro Signal division factor (not divided) */ + RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; + /* Set the SYNCSRC[1:0] bits according to CRS_Source value */ + RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; + /* HSI48 is synchronized with USB SOF at 1KHz rate */ + RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000); + RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; + /* Set the TRIM[5:0] to the default value*/ + RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; + /* Start automatic synchronization */ + HAL_RCCEx_CRSConfig (&RCC_CRSInitStruct); +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32l0/boards/stm32l0538disco/board.mk b/hw/bsp/stm32l0/boards/stm32l0538disco/board.mk new file mode 100644 index 000000000..deed519ba --- /dev/null +++ b/hw/bsp/stm32l0/boards/stm32l0538disco/board.mk @@ -0,0 +1,14 @@ +CFLAGS += \ + -DSTM32L053xx + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32L053C8Tx_FLASH.ld + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l053xx.s + +# For flash-jlink target +JLINK_DEVICE = STM32L053R8 + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c index 6bce88b39..89749fb50 100644 --- a/hw/bsp/stm32l0/family.c +++ b/hw/bsp/stm32l0/family.c @@ -39,21 +39,14 @@ void USB_IRQHandler(void) //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ +#ifdef UART_DEV UART_HandleTypeDef UartHandle; +#endif void board_init(void) { board_stm32l0_clock_init(); - // Enable All GPIOs clocks - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - - // Enable UART Clock - UART_CLK_EN(); - #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); @@ -66,6 +59,12 @@ void board_init(void) NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + // LED GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitStruct.Pin = LED_PIN; @@ -74,6 +73,8 @@ void board_init(void) GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + board_led_write(false); + // Button GPIO_InitStruct.Pin = BUTTON_PIN; GPIO_InitStruct.Mode = GPIO_MODE_INPUT; @@ -81,7 +82,10 @@ void board_init(void) GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - // Uart +#ifdef UART_DEV + // Enable UART Clock + UART_CLK_EN(); + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_PULLUP; @@ -98,13 +102,14 @@ void board_init(void) UartHandle.Init.Mode = UART_MODE_TX_RX; UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); +#endif // USB Pins // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); // USB Clock enable @@ -133,8 +138,13 @@ int board_uart_read(uint8_t* buf, int len) int board_uart_write(void const * buf, int len) { +#ifdef UART_DEV HAL_UART_Transmit(&UartHandle, (uint8_t*)(uintptr_t) buf, len, 0xffff); return len; +#else + (void) buf; (void) len; + return 0; +#endif } #if CFG_TUSB_OS == OPT_OS_NONE diff --git a/hw/bsp/stm32l0/family.mk b/hw/bsp/stm32l0/family.mk index 67a5c69b8..f069ae8f0 100644 --- a/hw/bsp/stm32l0/family.mk +++ b/hw/bsp/stm32l0/family.mk @@ -1,5 +1,8 @@ ST_FAMILY = l0 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver +DEPS_SUBMODULES += \ + lib/CMSIS_5 \ + hw/mcu/st/cmsis_device_$(ST_FAMILY) \ + hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver @@ -17,8 +20,12 @@ CFLAGS += \ -DCFG_EXAMPLE_VIDEO_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_STM32L0 -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-align -Wno-error=maybe-uninitialized +# mcu driver cause following warnings +CFLAGS += \ + -Wno-error=unused-parameter \ + -Wno-error=redundant-decls \ + -Wno-error=cast-align \ + -Wno-error=maybe-uninitialized SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ diff --git a/hw/bsp/stm32l0/stm32l0xx_hal_conf.h b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h index e3a131043..fd109bc8c 100644 --- a/hw/bsp/stm32l0/stm32l0xx_hal_conf.h +++ b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h @@ -2,19 +2,41 @@ ****************************************************************************** * @file stm32l0xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32l0xx_hal_conf.h. + * @brief HAL configuration file. ****************************************************************************** - * @attention * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

+ * Copyright (c) 2016 STMicroelectronics International N.V. All rights reserved. * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ @@ -35,35 +57,37 @@ * @brief This is the list of modules to be used in the HAL driver */ #define HAL_MODULE_ENABLED -/*#define HAL_ADC_MODULE_ENABLED */ -/*#define HAL_COMP_MODULE_ENABLED */ -/*#define HAL_CRC_MODULE_ENABLED */ -/*#define HAL_CRYP_MODULE_ENABLED */ -/*#define HAL_DAC_MODULE_ENABLED */ +// #define HAL_ADC_MODULE_ENABLED +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ #define HAL_DMA_MODULE_ENABLED -/*#define HAL_FIREWALL_MODULE_ENABLED */ +/* #define HAL_FIREWALL_MODULE_ENABLED */ #define HAL_FLASH_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED -/*#define HAL_I2C_MODULE_ENABLED */ -/*#define HAL_I2S_MODULE_ENABLED */ -/*#define HAL_IWDG_MODULE_ENABLED */ -/*#define HAL_LCD_MODULE_ENABLED */ -/*#define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LCD_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED #define HAL_RCC_MODULE_ENABLED -/*#define HAL_RNG_MODULE_ENABLED */ -/*#define HAL_RTC_MODULE_ENABLED */ -/*#define HAL_SPI_MODULE_ENABLED */ -/*#define HAL_TIM_MODULE_ENABLED */ -/*#define HAL_TSC_MODULE_ENABLED */ +//#define HAL_RNG_MODULE_ENABLED +/* #define HAL_RTC_MODULE_ENABLED */ +//#define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TSC_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/*#define HAL_USART_MODULE_ENABLED */ -/*#define HAL_IRDA_MODULE_ENABLED */ -/*#define HAL_SMARTCARD_MODULE_ENABLED */ -/*#define HAL_SMBUS_MODULE_ENABLED */ -/*#define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +//#define HAL_PCD_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ + /* ########################## Oscillator Values adaptation ####################*/ /** @@ -322,7 +346,7 @@ */ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) /* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); + void assert_failed(uint8_t *file, uint32_t line); #else #define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ diff --git a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld b/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld deleted file mode 100644 index 033dcc0ad..000000000 --- a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32L053C8Tx Device with -** 64KByte FLASH, 8KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20002000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x200; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/stm32l0538disco/board.mk b/hw/bsp/stm32l0538disco/board.mk deleted file mode 100644 index 72e887adf..000000000 --- a/hw/bsp/stm32l0538disco/board.mk +++ /dev/null @@ -1,54 +0,0 @@ -ST_FAMILY = l0 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DSTM32L053xx \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_EXAMPLE_VIDEO_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_STM32L0 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized -Wno-error=redundant-decls - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32L053C8Tx_FLASH.ld - -SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l053xx.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = STM32L053R8 - -# Path to STM32 Cube Programmer CLI, should be added into system path -STM32Prog = STM32_Programmer_CLI - -# flash target using on-board stlink -flash: $(BUILD)/$(PROJECT).elf - $(STM32Prog) --connect port=swd --write $< --go diff --git a/hw/bsp/stm32l0538disco/stm32l0538disco.c b/hw/bsp/stm32l0538disco/stm32l0538disco.c deleted file mode 100644 index 46f6f0ff6..000000000 --- a/hw/bsp/stm32l0538disco/stm32l0538disco.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "stm32l0xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_5 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow: - * HSI48 used as USB clock source - * - System Clock source = HSI - * - HSI Frequency(Hz) = 16000000 - * - SYSCLK(Hz) = 16000000 - * - HCLK(Hz) = 16000000 - * - AHB Prescaler = 1 - * - APB1 Prescaler = 1 - * - APB2 Prescaler = 1 - * - Flash Latency(WS) = 0 - * - Main regulator output voltage = Scale1 mode - * @param None - * @retval None - */ -static void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - static RCC_CRSInitTypeDef RCC_CRSInitStruct; - - /* Enable HSI Oscillator to be used as System clock source - Enable HSI48 Oscillator to be used as USB clock source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select HSI48 as USB clock source */ - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 - clock dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); - - /*Configure the clock recovery system (CRS)**********************************/ - - /*Enable CRS Clock*/ - __HAL_RCC_CRS_CLK_ENABLE(); - - /* Default Synchro Signal division factor (not divided) */ - RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; - /* Set the SYNCSRC[1:0] bits according to CRS_Source value */ - RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; - /* HSI48 is synchronized with USB SOF at 1KHz rate */ - RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000); - RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; - /* Set the TRIM[5:0] to the default value*/ - RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; - /* Start automatic synchronization */ - HAL_RCCEx_CRSConfig (&RCC_CRSInitStruct); -} - -void board_init(void) -{ - SystemClock_Config(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - //__HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // USB - /* Configure DM DP Pins */ - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clock */ - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - HAL_IncTick(); - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h b/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h deleted file mode 100644 index a917214c3..000000000 --- a/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h +++ /dev/null @@ -1,331 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l0xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * - * Copyright (c) 2016 STMicroelectronics International N.V. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32L0xx_HAL_CONF_H -#define __STM32L0xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -// #define HAL_ADC_MODULE_ENABLED -/* #define HAL_COMP_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_FIREWALL_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LCD_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -//#define HAL_RNG_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -//#define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_TSC_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -//#define HAL_PCD_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_PCD_MODULE_ENABLED */ - - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal Multiple Speed oscillator (MSI) default value. - * This value is the default MSI range value after Reset. - */ -#if !defined (MSI_VALUE) - #define MSI_VALUE ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* MSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal High Speed oscillator for USB (HSI48) value. - */ -#if !defined (HSI48_VALUE) -#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. - The real value may vary depending on the variations - in voltage and temperature. */ -#endif /* HSI48_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - -/** - * @brief Time out for LSE start up value in ms. - */ -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define PREREAD_ENABLE 1U -#define BUFFER_CACHE_DISABLE 0U - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver - * Activated: CRC code is present inside driver - * Deactivated: CRC code cleaned from driver - */ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32l0xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32l0xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32l0xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32l0xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32l0xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32l0xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32l0xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32l0xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32l0xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FIREWALL_MODULE_ENABLED - #include "stm32l0xx_hal_firewall.h" -#endif /* HAL_FIREWALL_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32l0xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32l0xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32l0xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32l0xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LCD_MODULE_ENABLED - #include "stm32l0xx_hal_lcd.h" -#endif /* HAL_LCD_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32l0xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32l0xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32l0xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32l0xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32l0xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32l0xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32l0xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32l0xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32l0xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32l0xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32l0xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32l0xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32l0xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32l0xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t *file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32L0xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.3.1 From 322f58ea8530e2b43d00a087b6d501776be25a00 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 12:47:05 +0700 Subject: add CFLAGS_SKIP to improve sam compile time --- .github/workflows/build_arm.yml | 5 ++--- examples/rules.mk | 4 ++++ hw/bsp/samd11/family.mk | 7 ++++++- hw/bsp/samd21/family.mk | 5 ++++- hw/bsp/samd51/family.mk | 4 ++-- hw/bsp/same5x/family.mk | 4 ++-- hw/bsp/same70_qmtech/board.mk | 5 ++++- hw/bsp/same70_xplained/board.mk | 5 ++++- hw/bsp/samg55xplained/board.mk | 5 ++++- hw/bsp/saml2x/family.mk | 5 ++++- 10 files changed, 36 insertions(+), 13 deletions(-) diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 3abfd50a8..8a3181440 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -48,9 +48,8 @@ jobs: - 'stm32f0 stm32f1' - 'stm32f4' - 'stm32f7' - - 'stm32g4 stm32wb' - - 'stm32h7' - - 'stm32l0 stm32l4' + - 'stm32g4 stm32h7' + - 'stm32l0 stm32l4 stm32u5 stm32wb' - 'tm4c123 xmc4000' steps: - name: Setup Python diff --git a/examples/rules.mk b/examples/rules.mk index 59cf4fd1f..b85837c16 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -66,6 +66,10 @@ ifeq ($(NO_LTO),1) CFLAGS := $(filter-out -flto,$(CFLAGS)) endif +ifneq ($(CFLAGS_SKIP),) +CFLAGS := $(filter-out $(CFLAGS_SKIP),$(CFLAGS)) +endif + LDFLAGS += $(CFLAGS) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections ifdef LD_FILE diff --git a/hw/bsp/samd11/family.mk b/hw/bsp/samd11/family.mk index dc6678b30..a2a5268aa 100644 --- a/hw/bsp/samd11/family.mk +++ b/hw/bsp/samd11/family.mk @@ -9,10 +9,15 @@ CFLAGS += \ -nostdlib -nostartfiles \ -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ -DOSC32K_OVERWRITE_CALIBRATION=0 \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_EXAMPLE_VIDEO_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_SAMD11 # suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS += -Wno-error=redundant-decls + +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk index 6d02d7fa6..30eccacb2 100644 --- a/hw/bsp/samd21/family.mk +++ b/hw/bsp/samd21/family.mk @@ -13,7 +13,10 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAMD21 # suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS += -Wno-error=redundant-decls + +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ diff --git a/hw/bsp/samd51/family.mk b/hw/bsp/samd51/family.mk index 3ecc5aa66..657e33438 100644 --- a/hw/bsp/samd51/family.mk +++ b/hw/bsp/samd51/family.mk @@ -13,8 +13,8 @@ CFLAGS += \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_SAMD51 -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-qual +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ diff --git a/hw/bsp/same5x/family.mk b/hw/bsp/same5x/family.mk index 7f8692c97..df1af4a9d 100644 --- a/hw/bsp/same5x/family.mk +++ b/hw/bsp/same5x/family.mk @@ -13,8 +13,8 @@ CFLAGS += \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_SAME5X -# suppress warning caused by vendor mcu driver -#CFLAGS += -Wno-error=cast-qual +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ diff --git a/hw/bsp/same70_qmtech/board.mk b/hw/bsp/same70_qmtech/board.mk index 1dcb8bfcd..ad5af2020 100644 --- a/hw/bsp/same70_qmtech/board.mk +++ b/hw/bsp/same70_qmtech/board.mk @@ -11,7 +11,10 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAMX7X # suppress following warnings from mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=redundant-decls + +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual ASF_DIR = hw/mcu/microchip/same70 diff --git a/hw/bsp/same70_xplained/board.mk b/hw/bsp/same70_xplained/board.mk index 95c4aaaa2..769d03e21 100644 --- a/hw/bsp/same70_xplained/board.mk +++ b/hw/bsp/same70_xplained/board.mk @@ -11,7 +11,10 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAMX7X # suppress following warnings from mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=redundant-decls + +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual ASF_DIR = hw/mcu/microchip/same70 diff --git a/hw/bsp/samg55xplained/board.mk b/hw/bsp/samg55xplained/board.mk index 7cc9487fd..ed0d59772 100644 --- a/hw/bsp/samg55xplained/board.mk +++ b/hw/bsp/samg55xplained/board.mk @@ -12,7 +12,10 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAMG # suppress following warnings from mcu driver -CFLAGS += -Wno-error=undef -Wno-error=cast-qual -Wno-error=null-dereference -Wno-error=redundant-decls +CFLAGS += -Wno-error=undef -Wno-error=null-dereference -Wno-error=redundant-decls + +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual ASF_DIR = hw/mcu/microchip/samg55 diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk index 6022158de..91c2cfa61 100644 --- a/hw/bsp/saml2x/family.mk +++ b/hw/bsp/saml2x/family.mk @@ -14,7 +14,10 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAML22 # suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS += -Wno-error=redundant-decls + +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ -- cgit v1.3.1 From b46632ba07d5e3827029413f69618f41f987f452 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 13:11:41 +0700 Subject: bsp for f2 f3 --- .github/workflows/build_arm.yml | 7 +- .../boards/stm32f207nucleo/STM32F207ZGTx_FLASH.ld | 167 +++++++++ hw/bsp/stm32f2/boards/stm32f207nucleo/board.mk | 14 + .../boards/stm32f207nucleo/stm32f207nucleo.c | 214 +++++++++++ hw/bsp/stm32f2/family.mk | 41 +++ hw/bsp/stm32f2/stm32f2xx_hal_conf.h | 407 +++++++++++++++++++++ hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld | 167 --------- hw/bsp/stm32f207nucleo/board.mk | 48 --- hw/bsp/stm32f207nucleo/stm32f207nucleo.c | 214 ----------- hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h | 407 --------------------- .../boards/stm32f303disco/STM32F303VCTx_FLASH.ld | 187 ++++++++++ hw/bsp/stm32f3/boards/stm32f303disco/board.mk | 14 + .../stm32f3/boards/stm32f303disco/stm32f303disco.c | 216 +++++++++++ .../boards/stm32f303disco/stm32f3xx_hal_conf.h | 357 ++++++++++++++++++ hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld | 187 ---------- hw/bsp/stm32f303disco/board.mk | 49 --- hw/bsp/stm32f303disco/stm32f303disco.c | 216 ----------- hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h | 357 ------------------ 18 files changed, 1620 insertions(+), 1649 deletions(-) create mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/STM32F207ZGTx_FLASH.ld create mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/board.mk create mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c create mode 100644 hw/bsp/stm32f2/family.mk create mode 100644 hw/bsp/stm32f2/stm32f2xx_hal_conf.h delete mode 100644 hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld delete mode 100644 hw/bsp/stm32f207nucleo/board.mk delete mode 100644 hw/bsp/stm32f207nucleo/stm32f207nucleo.c delete mode 100644 hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/STM32F303VCTx_FLASH.ld create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/board.mk create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h delete mode 100644 hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld delete mode 100644 hw/bsp/stm32f303disco/board.mk delete mode 100644 hw/bsp/stm32f303disco/stm32f303disco.c delete mode 100644 hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 8a3181440..2f72e758a 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -41,11 +41,10 @@ jobs: - 'nrf' - 'ra' - 'rp2040' - - 'samd11 same5x' - - 'samd21' - - 'samd51' + - 'samd11 samd21' + - 'samd51 same5x' - 'saml2x' - - 'stm32f0 stm32f1' + - 'stm32f0 stm32f1 stm32f2 stm32f3' - 'stm32f4' - 'stm32f7' - 'stm32g4 stm32h7' diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/STM32F207ZGTx_FLASH.ld b/hw/bsp/stm32f2/boards/stm32f207nucleo/STM32F207ZGTx_FLASH.ld new file mode 100644 index 000000000..3fce1b578 --- /dev/null +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/STM32F207ZGTx_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F207IGHx Device with +** 1024KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.mk b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.mk new file mode 100644 index 000000000..ba185d199 --- /dev/null +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.mk @@ -0,0 +1,14 @@ +CFLAGS += \ + -DSTM32F207xx \ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32F207ZGTx_FLASH.ld + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32f207zg + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c new file mode 100644 index 000000000..48203b787 --- /dev/null +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c @@ -0,0 +1,214 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" + +#include "stm32f2xx_hal.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) +{ + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- + __HAL_RCC_GPIOB_CLK_ENABLE(); // LED + __HAL_RCC_GPIOC_CLK_ENABLE(); // Button +} + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 120000000 + * HCLK(Hz) = 120000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 4 + * APB2 Prescaler = 2 + * HSE Frequency(Hz) = 8000000 + * PLL_M = HSE_VALUE/1000000 + * PLL_N = 240 + * PLL_P = 2 + * PLL_Q = 5 + * VDD(V) = 3.3 + * Flash Latency(WS) = 3 + * @param None + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 240; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 5; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); +} + +void board_init(void) +{ + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + + all_rcc_clk_enable(); + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + board_led_write(false); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clocks */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/stm32f2/family.mk b/hw/bsp/stm32f2/family.mk new file mode 100644 index 000000000..7ca378548 --- /dev/null +++ b/hw/bsp/stm32f2/family.mk @@ -0,0 +1,41 @@ +ST_FAMILY = f2 + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +DEPS_SUBMODULES += \ + lib/CMSIS_5 \ + $(ST_CMSIS) \ + $(ST_HAL_DRIVER) + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F2 + +# mcu driver cause following warnings +CFLAGS += -Wno-error=sign-compare + +SRC_C += \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/$(BOARD_PATH) + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/hw/bsp/stm32f2/stm32f2xx_hal_conf.h b/hw/bsp/stm32f2/stm32f2xx_hal_conf.h new file mode 100644 index 000000000..b38a9d951 --- /dev/null +++ b/hw/bsp/stm32f2/stm32f2xx_hal_conf.h @@ -0,0 +1,407 @@ +/** + ****************************************************************************** + * @file stm32f2xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F2xx_HAL_CONF_H +#define __STM32F2xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_EXTI_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_UART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 5U /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f2xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f2xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f2xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f2xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f2xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f2xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f2xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f2xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f2xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f2xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f2xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f2xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f2xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f2xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f2xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f2xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f2xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f2xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f2xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f2xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f2xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f2xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f2xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f2xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f2xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f2xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f2xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f2xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f2xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f2xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f2xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f2xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f2xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f2xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F2xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld b/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld deleted file mode 100644 index 3fce1b578..000000000 --- a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F207IGHx Device with -** 1024KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/stm32f207nucleo/board.mk b/hw/bsp/stm32f207nucleo/board.mk deleted file mode 100644 index 55581e1ec..000000000 --- a/hw/bsp/stm32f207nucleo/board.mk +++ /dev/null @@ -1,48 +0,0 @@ -ST_FAMILY = f2 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DSTM32F207xx \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F2 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=sign-compare - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32F207ZGTx_FLASH.ld - -SRC_C += \ - src/portable/synopsys/dwc2/dcd_dwc2.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = stm32f207zg - -# flash target using on-board stlink -flash: flash-stlink diff --git a/hw/bsp/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f207nucleo/stm32f207nucleo.c deleted file mode 100644 index 80f762c93..000000000 --- a/hw/bsp/stm32f207nucleo/stm32f207nucleo.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" - -#include "stm32f2xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- - __HAL_RCC_GPIOB_CLK_ENABLE(); // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); // Button -} - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 120000000 - * HCLK(Hz) = 120000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 4 - * APB2 Prescaler = 2 - * HSE Frequency(Hz) = 8000000 - * PLL_M = HSE_VALUE/1000000 - * PLL_N = 240 - * PLL_P = 2 - * PLL_Q = 5 - * VDD(V) = 3.3 - * Flash Latency(WS) = 3 - * @param None - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 240; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 5; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - - all_rcc_clk_enable(); - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure ID pin */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clocks */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - HAL_IncTick(); - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h b/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h deleted file mode 100644 index b38a9d951..000000000 --- a/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h +++ /dev/null @@ -1,407 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f2xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F2xx_HAL_CONF_H -#define __STM32F2xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_EXTI_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 1U -#define DATA_CACHE_ENABLE 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2U -#define MAC_ADDR1 0U -#define MAC_ADDR2 0U -#define MAC_ADDR3 0U -#define MAC_ADDR4 0U -#define MAC_ADDR5 0U - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB 5U /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* LAN8742A PHY Address*/ -#define LAN8742A_PHY_ADDRESS 0x00U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY 0x000000FFU -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY 0x00000FFFU - -#define PHY_READ_TO 0x0000FFFFU -#define PHY_WRITE_TO 0x0000FFFFU - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ - - -#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ -#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - -/* ################## SPI peripheral configuration ########################## */ - -/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver -* Activated: CRC code is present inside driver -* Deactivated: CRC code cleaned from driver -*/ - -#define USE_SPI_CRC 1U - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f2xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f2xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f2xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f2xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f2xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f2xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f2xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f2xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f2xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f2xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f2xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f2xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f2xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f2xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f2xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f2xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f2xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f2xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f2xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f2xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f2xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f2xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f2xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f2xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f2xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f2xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f2xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f2xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f2xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f2xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f2xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f2xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f2xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f2xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F2xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/STM32F303VCTx_FLASH.ld b/hw/bsp/stm32f3/boards/stm32f303disco/STM32F303VCTx_FLASH.ld new file mode 100644 index 000000000..981107af1 --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/STM32F303VCTx_FLASH.ld @@ -0,0 +1,187 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F303VCTx Device with +** 256KByte FLASH, 40KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x2000a000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x800;; /* required amount of heap */ +_Min_Stack_Size = 0x800;; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 40K +CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 8K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.mk b/hw/bsp/stm32f3/boards/stm32f303disco/board.mk new file mode 100644 index 000000000..e387f2d54 --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.mk @@ -0,0 +1,14 @@ +CFLAGS += \ + -DSTM32F303xC \ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32F303VCTx_FLASH.ld + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f303xc.s + +# For flash-jlink target +JLINK_DEVICE = stm32f303vc + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c new file mode 100644 index 000000000..ac9bda983 --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c @@ -0,0 +1,216 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "stm32f3xx_hal.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the +// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. + +// FIXME: Do all three need to be handled, or just the LP one? +// USB high-priority interrupt (Channel 74): Triggered only by a correct +// transfer event for isochronous and double-buffer bulk transfer to reach +// the highest possible transfer rate. +void USB_HP_IRQHandler(void) +{ + tud_int_handler(0); +} + +// USB low-priority interrupt (Channel 75): Triggered by all USB events +// (Correct transfer, USB reset, etc.). The firmware has to check the +// interrupt source before serving the interrupt. +void USB_LP_IRQHandler(void) +{ + tud_int_handler(0); +} + +// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB +// Suspend mode. +void USBWakeUp_RMP_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PORT GPIOE +#define LED_PIN GPIO_PIN_9 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 72000000 + * HCLK(Hz) = 72000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 2 + * APB2 Prescaler = 1 + * HSE Frequency(Hz) = 8000000 + * HSE PREDIV = 1 + * PLLMUL = RCC_PLL_MUL9 (9) + * Flash Latency(WS) = 2 + * @param None + * @retval None + */ +static void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Configures the USB clock */ + HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); + RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + /* Enable Power Clock */ + __HAL_RCC_PWR_CLK_ENABLE(); +} + +void board_init(void) +{ + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + // Remap the USB interrupts + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_REMAPINTERRUPT_USB_ENABLE(); + + // LED + __HAL_RCC_GPIOE_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure USB DM and DP pins */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF14_USB; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable USB clock + __HAL_RCC_USB_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h new file mode 100644 index 000000000..82d3765af --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h @@ -0,0 +1,357 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F3xx_HAL_CONF_H +#define __STM32F3xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_PWR_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SDADC_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (40000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) + * - External clock not generated on EVAL 373 + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 0U +#define DATA_CACHE_ENABLE 0U +#define USE_SPI_CRC 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/*#define USE_FULL_ASSERT 1U*/ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f3xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f3xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f3xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f3xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f3xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f3xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f3xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f3xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f3xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f3xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f3xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f3xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f3xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f3xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f3xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f3xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f3xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32f3xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f3xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f3xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f3xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f3xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32f3xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f3xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f3xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f3xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SDADC_MODULE_ENABLED + #include "stm32f3xx_hal_sdadc.h" +#endif /* HAL_SDADC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f3xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f3xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f3xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f3xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f3xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f3xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f3xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f3xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F3xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld b/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld deleted file mode 100644 index 981107af1..000000000 --- a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld +++ /dev/null @@ -1,187 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F303VCTx Device with -** 256KByte FLASH, 40KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x2000a000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x800;; /* required amount of heap */ -_Min_Stack_Size = 0x800;; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 40K -CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 8K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - _siccmram = LOADADDR(.ccmram); - - /* CCM-RAM section - * - * IMPORTANT NOTE! - * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. - */ - .ccmram : - { - . = ALIGN(4); - _sccmram = .; /* create a global symbol at ccmram start */ - *(.ccmram) - *(.ccmram*) - - . = ALIGN(4); - _eccmram = .; /* create a global symbol at ccmram end */ - } >CCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/stm32f303disco/board.mk b/hw/bsp/stm32f303disco/board.mk deleted file mode 100644 index b81de4ee4..000000000 --- a/hw/bsp/stm32f303disco/board.mk +++ /dev/null @@ -1,49 +0,0 @@ -ST_FAMILY = f3 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -DSTM32F303xC \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F3 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32F303VCTx_FLASH.ld - -SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f303xc.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = stm32f303vc - -# flash target using on-board stlink -flash: flash-stlink diff --git a/hw/bsp/stm32f303disco/stm32f303disco.c b/hw/bsp/stm32f303disco/stm32f303disco.c deleted file mode 100644 index ac9bda983..000000000 --- a/hw/bsp/stm32f303disco/stm32f303disco.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "stm32f3xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the -// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. - -// FIXME: Do all three need to be handled, or just the LP one? -// USB high-priority interrupt (Channel 74): Triggered only by a correct -// transfer event for isochronous and double-buffer bulk transfer to reach -// the highest possible transfer rate. -void USB_HP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB low-priority interrupt (Channel 75): Triggered by all USB events -// (Correct transfer, USB reset, etc.). The firmware has to check the -// interrupt source before serving the interrupt. -void USB_LP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB -// Suspend mode. -void USBWakeUp_RMP_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOE -#define LED_PIN GPIO_PIN_9 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 72000000 - * HCLK(Hz) = 72000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 2 - * APB2 Prescaler = 1 - * HSE Frequency(Hz) = 8000000 - * HSE PREDIV = 1 - * PLLMUL = RCC_PLL_MUL9 (9) - * Flash Latency(WS) = 2 - * @param None - * @retval None - */ -static void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Configures the USB clock */ - HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); - RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - /* Enable Power Clock */ - __HAL_RCC_PWR_CLK_ENABLE(); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - // Remap the USB interrupts - __HAL_RCC_SYSCFG_CLK_ENABLE(); - __HAL_REMAPINTERRUPT_USB_ENABLE(); - - // LED - __HAL_RCC_GPIOE_CLK_ENABLE(); - GPIO_InitTypeDef GPIO_InitStruct; - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure USB DM and DP pins */ - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF14_USB; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable USB clock - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - HAL_IncTick(); - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h b/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h deleted file mode 100644 index 82d3765af..000000000 --- a/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h +++ /dev/null @@ -1,357 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f3xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F3xx_HAL_CONF_H -#define __STM32F3xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_PWR_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SDADC_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value - */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value - */ -#if !defined (HSI_STARTUP_TIMEOUT) - #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (40000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -/** - * @brief Time out for LSE start up value in ms. - */ -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) - * - External clock not generated on EVAL 373 - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 0U -#define DATA_CACHE_ENABLE 0U -#define USE_SPI_CRC 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/*#define USE_FULL_ASSERT 1U*/ - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f3xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f3xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f3xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f3xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f3xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f3xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f3xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f3xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f3xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32f3xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f3xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f3xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f3xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f3xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f3xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f3xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f3xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32f3xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f3xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f3xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f3xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f3xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED - #include "stm32f3xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f3xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f3xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f3xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SDADC_MODULE_ENABLED - #include "stm32f3xx_hal_sdadc.h" -#endif /* HAL_SDADC_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f3xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f3xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f3xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f3xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32f3xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f3xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f3xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f3xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F3xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.3.1 From aa11e213584526e69e4e7e16553b24fc08481bc5 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 13:15:05 +0700 Subject: add mising file --- hw/bsp/stm32f3/family.mk | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 hw/bsp/stm32f3/family.mk diff --git a/hw/bsp/stm32f3/family.mk b/hw/bsp/stm32f3/family.mk new file mode 100644 index 000000000..f3b21d530 --- /dev/null +++ b/hw/bsp/stm32f3/family.mk @@ -0,0 +1,42 @@ +ST_FAMILY = f3 + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +DEPS_SUBMODULES += \ + lib/CMSIS_5 \ + $(ST_CMSIS) \ + $(ST_HAL_DRIVER) + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F3 + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter + +SRC_C += \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/$(BOARD_PATH) + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F -- cgit v1.3.1 From 1867ba0bc10c89977a8370a8a55e5d68f6231e13 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 16:43:59 +0700 Subject: fix l4 hw testing ci --- .github/workflows/build_arm.yml | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 2f72e758a..ee3d9f533 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -94,21 +94,30 @@ jobs: # Upload binaries for rp2040/stm32l412nucleo hardware test with self-hosted - name: Prepare rp2040 Artifacts - if: matrix.family == 'rp2040' && github.repository_owner == 'hathach' + if: contains(matrix.family, 'rp2040') && github.repository_owner == 'hathach' run: find examples/ -name "*.elf" -exec mv {} . \; - name: Prepare stm32l412nucleo Artifacts - if: matrix.family == 'stm32l4' + if: contains(matrix.family, 'stm32l4') run: find examples/ -path "*stm32l412nucleo/*.elf" -exec mv {} . \; - - name: Upload Artifacts for hardware testing - if: matrix.family == 'stm32l4' || (matrix.family == 'rp2040' && github.repository_owner == 'hathach') + - name: Upload Artifacts for rp2040 + if: contains(matrix.family,'rp2040') && github.repository_owner == 'hathach') uses: actions/upload-artifact@v3 with: - name: ${{ matrix.family }} + name: rp2040 + path: | + *.elf + + - name: Upload Artifacts for stm32l412nucleo + if: contains(matrix.family, 'stm32l4') && github.repository_owner == 'hathach') + uses: actions/upload-artifact@v3 + with: + name: stm32l4 path: | *.elf + # --------------------------------------- # Build all no-family (orphaned) boards # disable this workflow since it is often failed randomly -- cgit v1.3.1 From 80be1aa13dcdd0b86c01212b6266a099669c98b2 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 17:19:33 +0700 Subject: bsp lpc11 --- .github/workflows/build_arm.yml | 2 +- hw/bsp/lpc11/boards/lpcxpresso11u37/board.mk | 24 ++ hw/bsp/lpc11/boards/lpcxpresso11u37/lpc11u37.ld | 195 +++++++++++++++++ .../lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c | 208 ++++++++++++++++++ hw/bsp/lpc11/boards/lpcxpresso11u68/board.mk | 18 ++ hw/bsp/lpc11/boards/lpcxpresso11u68/lpc11u68.ld | 242 +++++++++++++++++++++ .../lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c | 135 ++++++++++++ hw/bsp/lpc11/family.mk | 43 ++++ hw/bsp/lpcxpresso11u37/board.mk | 46 ---- hw/bsp/lpcxpresso11u37/lpc11u37.ld | 195 ----------------- hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c | 208 ------------------ hw/bsp/lpcxpresso11u68/board.mk | 42 ---- hw/bsp/lpcxpresso11u68/lpc11u68.ld | 242 --------------------- hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c | 135 ------------ 14 files changed, 866 insertions(+), 869 deletions(-) create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u37/board.mk create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u37/lpc11u37.ld create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u68/board.mk create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u68/lpc11u68.ld create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c create mode 100644 hw/bsp/lpc11/family.mk delete mode 100644 hw/bsp/lpcxpresso11u37/board.mk delete mode 100644 hw/bsp/lpcxpresso11u37/lpc11u37.ld delete mode 100644 hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c delete mode 100644 hw/bsp/lpcxpresso11u68/board.mk delete mode 100644 hw/bsp/lpcxpresso11u68/lpc11u68.ld delete mode 100644 hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index ee3d9f533..1a0e556e9 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -35,7 +35,7 @@ jobs: - 'broadcom_32bit' - 'imxrt' - 'kinetis_k32 kinetis_kl' - - 'lpc15 lpc18' + - 'lpc11 lpc15 lpc18' - 'lpc54 lpc55' - 'mm32 msp432e4' - 'nrf' diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u37/board.mk b/hw/bsp/lpc11/boards/lpcxpresso11u37/board.mk new file mode 100644 index 000000000..fdc17374b --- /dev/null +++ b/hw/bsp/lpc11/boards/lpcxpresso11u37/board.mk @@ -0,0 +1,24 @@ +MCU = 11uxx +MCU_DRV = 11xx + +CFLAGS += \ + -DCORE_M0 \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_EXAMPLE_VIDEO_READONLY \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' + +# mcu driver cause following warnings +CFLAGS += \ + -Wno-error=strict-prototypes \ + -Wno-error=unused-parameter \ + -Wno-error=redundant-decls + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/lpc11u37.ld + +# For flash-jlink target +JLINK_DEVICE = LPC11U37/401 +PYOCD_TARGET = lpc11u37 + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u37/lpc11u37.ld b/hw/bsp/lpc11/boards/lpcxpresso11u37/lpc11u37.ld new file mode 100644 index 000000000..8e0a4e4c6 --- /dev/null +++ b/hw/bsp/lpc11/boards/lpcxpresso11u37/lpc11u37.ld @@ -0,0 +1,195 @@ +/* + * GENERATED FILE - DO NOT EDIT + * Copyright (c) 2008-2013 Code Red Technologies Ltd, + * Copyright 2015, 2018-2019 NXP + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC11U37/401 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Sep 6, 2019 12:16:06 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash128 = 0x0 ; /* MFlash128 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ + __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash128 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash128 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash128 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash128 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamUsb2 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamUsb2) + *(.data.$RAM2) + *(.data.$RamUsb2) + *(.data.$RAM2.*) + *(.data.$RamUsb2.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamUsb2 AT>MFlash128 + /* MAIN DATA SECTION */ + .uninit_RESERVED (NOLOAD) : + { + . = ALIGN(4) ; + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc8 + + /* Main DATA section (RamLoc8) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc8 AT>MFlash128 + + /* BSS section for RamUsb2 */ + .bss_RAM2 : + { + . = ALIGN(4) ; + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2) + *(.bss.$RamUsb2) + *(.bss.$RAM2.*) + *(.bss.$RamUsb2.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamUsb2 + + /* MAIN BSS SECTION */ + .bss : + { + . = ALIGN(4) ; + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc8 + + /* NOINIT section for RamUsb2 */ + .noinit_RAM2 (NOLOAD) : + { + . = ALIGN(4) ; + *(.noinit.$RAM2) + *(.noinit.$RamUsb2) + *(.noinit.$RAM2.*) + *(.noinit.$RamUsb2.*) + . = ALIGN(4) ; + } > RamUsb2 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): + { + . = ALIGN(4) ; + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc8 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + ) + ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c b/hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c new file mode 100644 index 000000000..02dc2cbf9 --- /dev/null +++ b/hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c @@ -0,0 +1,208 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "bsp/board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//---------------------------------------------------------------- ----+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 1 +#define LED_PIN 24 +#define LED_STATE_ON 0 + +// Wake up Switch +#define BUTTON_PORT 0 +#define BUTTON_PIN 16 +#define BUTTON_STATE_ACTIVE 0 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +/* Pin muxing table, only items that need changing from their default pin + state are in this table. Not every pin is mapped. */ +/* IOCON pin definitions for pin muxing */ +typedef struct { + uint32_t port : 8; /* Pin port */ + uint32_t pin : 8; /* Pin number */ + uint32_t modefunc : 16; /* Function and mode */ +} PINMUX_GRP_T; + +static const PINMUX_GRP_T pinmuxing[] = +{ + {0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS + {0, 6, (IOCON_FUNC1 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */ + + {0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX + {0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX +}; + +/* Setup system clocking */ +static void SystemSetupClocking(void) +{ + volatile int i; + + /* Powerup main oscillator */ + Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSOSC_PD); + + /* Wait 200us for OSC to be stablized, no status + indication, dummy wait. */ + for (i = 0; i < 0x100; i++) {} + + /* Set system PLL input to main oscillator */ + Chip_Clock_SetSystemPLLSource(SYSCTL_PLLCLKSRC_MAINOSC); + + /* Power down PLL to change the PLL divider ratio */ + Chip_SYSCTL_PowerDown(SYSCTL_POWERDOWN_SYSPLL_PD); + + /* Setup PLL for main oscillator rate (FCLKIN = 12MHz) * 4 = 48MHz + MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2) + FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz + FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */ + Chip_Clock_SetupSystemPLL(3, 1); + + /* Powerup system PLL */ + Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSPLL_PD); + + /* Wait for PLL to lock */ + while (!Chip_Clock_IsSystemPLLLocked()) {} + + /* Set system clock divider to 1 */ + Chip_Clock_SetSysClockDiv(1); + + /* Setup FLASH access to 3 clocks */ + Chip_FMC_SetFLASHAccess(FLASHTIM_50MHZ_CPU); + + /* Set main clock source to the system PLL. This will drive 48MHz + for the main clock and 48MHz for the system clock */ + Chip_Clock_SetMainClockSource(SYSCTL_MAINCLKSRC_PLLOUT); + + /* Set USB PLL input to main oscillator */ + Chip_Clock_SetUSBPLLSource(SYSCTL_PLLCLKSRC_MAINOSC); + /* Setup USB PLL (FCLKIN = 12MHz) * 4 = 48MHz + MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2) + FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz + FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */ + Chip_Clock_SetupUSBPLL(3, 1); + + /* Powerup USB PLL */ + Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPLL_PD); + + /* Wait for PLL to lock */ + while (!Chip_Clock_IsUSBPLLLocked()) {} +} + +// Invoked by startup code +void SystemInit(void) +{ + SystemSetupClocking(); + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_RAM1); + + /* Enable IOCON clock */ + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); + for (uint32_t i = 0; i < (sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); i++) + { + Chip_IOCON_PinMuxSet(LPC_IOCON, pinmuxing[i].port, pinmuxing[i].pin, pinmuxing[i].modefunc); + } +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + + // USB: Setup PLL clock, and power + /* enable USB main clock */ + Chip_Clock_SetUSBClockSource(SYSCTL_USBCLKSRC_PLLOUT, 1); + /* Enable AHB clock to the USB block and USB RAM. */ + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USB); + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USBRAM); + /* power UP USB Phy */ + Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPAD_PD); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u68/board.mk b/hw/bsp/lpc11/boards/lpcxpresso11u68/board.mk new file mode 100644 index 000000000..fbe97b853 --- /dev/null +++ b/hw/bsp/lpc11/boards/lpcxpresso11u68/board.mk @@ -0,0 +1,18 @@ +MCU = 11u6x +MCU_DRV = 11u6x + +CFLAGS += \ + -DCORE_M0PLUS \ + -D__VTOR_PRESENT=0 \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM3")))' \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/lpc11u68.ld + +# For flash-jlink target +JLINK_DEVICE = LPC11U68 +PYOCD_TARGET = lpc11u68 + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u68/lpc11u68.ld b/hw/bsp/lpc11/boards/lpcxpresso11u68/lpc11u68.ld new file mode 100644 index 000000000..4a35b192e --- /dev/null +++ b/hw/bsp/lpc11/boards/lpcxpresso11u68/lpc11u68.ld @@ -0,0 +1,242 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC11U68 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 4:55:54 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ + Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash256 = 0x0 ; /* MFlash256 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ + __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ + __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ + __base_RAM2 = 0x20000000 ; /* RAM2 */ + __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ + __base_RAM3 = 0x20004000 ; /* RAM3 */ + __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash256 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash256 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash256 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash256 + __exidx_end = .; + + _etext = .; + + /* possible MTB section for Ram1_2 */ + .mtb_buffer_RAM2 (NOLOAD) : + { + KEEP(*(.mtb.$RAM2*)) + KEEP(*(.mtb.$Ram1_2*)) + } > Ram1_2 + + /* DATA section for Ram1_2 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$Ram1_2) + *(.data.$RAM2*) + *(.data.$Ram1_2*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > Ram1_2 AT>MFlash256 + /* possible MTB section for Ram2USB_2 */ + .mtb_buffer_RAM3 (NOLOAD) : + { + KEEP(*(.mtb.$RAM3*)) + KEEP(*(.mtb.$Ram2USB_2*)) + } > Ram2USB_2 + + /* DATA section for Ram2USB_2 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$Ram2USB_2) + *(.data.$RAM3*) + *(.data.$Ram2USB_2*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > Ram2USB_2 AT>MFlash256 + /* MAIN DATA SECTION */ + /* Default MTB section */ + .mtb_buffer_default (NOLOAD) : + { + KEEP(*(.mtb*)) + } > Ram0_32 + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > Ram0_32 + + /* Main DATA section (Ram0_32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > Ram0_32 AT>MFlash256 + + /* BSS section for Ram1_2 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$Ram1_2*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > Ram1_2 + + /* BSS section for Ram2USB_2 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3*) + *(.bss.$Ram2USB_2*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > Ram2USB_2 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > Ram0_32 + + /* NOINIT section for Ram1_2 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$Ram1_2*) + . = ALIGN(4) ; + } > Ram1_2 + + /* NOINIT section for Ram2USB_2 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM3*) + *(.noinit.$Ram2USB_2*) + . = ALIGN(4) ; + } > Ram2USB_2 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > Ram0_32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + ) + ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c b/hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c new file mode 100644 index 000000000..44d091511 --- /dev/null +++ b/hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c @@ -0,0 +1,135 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "bsp/board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 2 +#define LED_PIN 17 +#define LED_STATE_ON 0 + +// Wake up Switch +#define BUTTON_PORT 0 +#define BUTTON_PIN 16 +#define BUTTON_STATE_ACTIVE 0 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t RTCOscRateIn = 32768; + +/* Pin muxing table, only items that need changing from their default pin + state are in this table. Not every pin is mapped. */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS + {0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX + {0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX + {2, 0, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALIN + {2, 1, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALOUT +}; + +// Invoked by startup code +void SystemInit(void) +{ + /* Enable IOCON clock */ + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + + // USB: Setup PLL clock, and power + Chip_USB_Init(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/lpc11/family.mk b/hw/bsp/lpc11/family.mk new file mode 100644 index 000000000..eb427c09d --- /dev/null +++ b/hw/bsp/lpc11/family.mk @@ -0,0 +1,43 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc$(MCU)/lpc_chip_$(MCU) +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -nostdlib \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc$(MCU_DRV).c \ + $(MCU_DIR)/src/chip_$(MCU_DRV).c \ + $(MCU_DIR)/src/clock_$(MCU_DRV).c \ + $(MCU_DIR)/src/iocon_$(MCU_DRV).c \ + $(MCU_DIR)/src/sysinit_$(MCU_DRV).c + +ifeq ($(MCU),11u6x) +SRC_C += \ + $(MCU_DIR)/src/gpio_$(MCU_DRV).c \ + $(MCU_DIR)/src/syscon_$(MCU_DRV).c \ + +else + +SRC_C += \ + $(MCU_DIR)/src/gpio_$(MCU_DRV)_1.c \ + $(MCU_DIR)/src/sysctl_$(MCU_DRV).c +endif + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = LPC11U68 diff --git a/hw/bsp/lpcxpresso11u37/board.mk b/hw/bsp/lpcxpresso11u37/board.mk deleted file mode 100644 index 61e5eda7e..000000000 --- a/hw/bsp/lpcxpresso11u37/board.mk +++ /dev/null @@ -1,46 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0 \ - -nostdlib \ - -DCORE_M0 \ - -D__USE_LPCOPEN \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_EXAMPLE_VIDEO_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ - -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=redundant-decls - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc11uxx/lpc_chip_11uxx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc11u37.ld - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc11xx.c \ - $(MCU_DIR)/src/chip_11xx.c \ - $(MCU_DIR)/src/clock_11xx.c \ - $(MCU_DIR)/src/gpio_11xx_1.c \ - $(MCU_DIR)/src/iocon_11xx.c \ - $(MCU_DIR)/src/sysctl_11xx.c \ - $(MCU_DIR)/src/sysinit_11xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = LPC11U37/401 - -# flash using pyocd -flash: $(BUILD)/$(PROJECT).hex - pyocd flash -t lpc11u37 $< diff --git a/hw/bsp/lpcxpresso11u37/lpc11u37.ld b/hw/bsp/lpcxpresso11u37/lpc11u37.ld deleted file mode 100644 index 8e0a4e4c6..000000000 --- a/hw/bsp/lpcxpresso11u37/lpc11u37.ld +++ /dev/null @@ -1,195 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * Copyright (c) 2008-2013 Code Red Technologies Ltd, - * Copyright 2015, 2018-2019 NXP - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC11U37/401 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Sep 6, 2019 12:16:06 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash128 = 0x0 ; /* MFlash128 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ - __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ - - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash128 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash128 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash128 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash128 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamUsb2 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamUsb2) - *(.data.$RAM2) - *(.data.$RamUsb2) - *(.data.$RAM2.*) - *(.data.$RamUsb2.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamUsb2 AT>MFlash128 - /* MAIN DATA SECTION */ - .uninit_RESERVED (NOLOAD) : - { - . = ALIGN(4) ; - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc8 - - /* Main DATA section (RamLoc8) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc8 AT>MFlash128 - - /* BSS section for RamUsb2 */ - .bss_RAM2 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2) - *(.bss.$RamUsb2) - *(.bss.$RAM2.*) - *(.bss.$RamUsb2.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamUsb2 - - /* MAIN BSS SECTION */ - .bss : - { - . = ALIGN(4) ; - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc8 - - /* NOINIT section for RamUsb2 */ - .noinit_RAM2 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM2) - *(.noinit.$RamUsb2) - *(.noinit.$RAM2.*) - *(.noinit.$RamUsb2.*) - . = ALIGN(4) ; - } > RamUsb2 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): - { - . = ALIGN(4) ; - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc8 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) - ) - ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c b/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c deleted file mode 100644 index 79cd685c3..000000000 --- a/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//---------------------------------------------------------------- ----+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 1 -#define LED_PIN 24 -#define LED_STATE_ON 0 - -// Wake up Switch -#define BUTTON_PORT 0 -#define BUTTON_PIN 16 -#define BUTTON_STATE_ACTIVE 0 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -/* Pin muxing table, only items that need changing from their default pin - state are in this table. Not every pin is mapped. */ -/* IOCON pin definitions for pin muxing */ -typedef struct { - uint32_t port : 8; /* Pin port */ - uint32_t pin : 8; /* Pin number */ - uint32_t modefunc : 16; /* Function and mode */ -} PINMUX_GRP_T; - -static const PINMUX_GRP_T pinmuxing[] = -{ - {0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS - {0, 6, (IOCON_FUNC1 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */ - - {0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX - {0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX -}; - -/* Setup system clocking */ -static void SystemSetupClocking(void) -{ - volatile int i; - - /* Powerup main oscillator */ - Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSOSC_PD); - - /* Wait 200us for OSC to be stablized, no status - indication, dummy wait. */ - for (i = 0; i < 0x100; i++) {} - - /* Set system PLL input to main oscillator */ - Chip_Clock_SetSystemPLLSource(SYSCTL_PLLCLKSRC_MAINOSC); - - /* Power down PLL to change the PLL divider ratio */ - Chip_SYSCTL_PowerDown(SYSCTL_POWERDOWN_SYSPLL_PD); - - /* Setup PLL for main oscillator rate (FCLKIN = 12MHz) * 4 = 48MHz - MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2) - FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz - FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */ - Chip_Clock_SetupSystemPLL(3, 1); - - /* Powerup system PLL */ - Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_SYSPLL_PD); - - /* Wait for PLL to lock */ - while (!Chip_Clock_IsSystemPLLLocked()) {} - - /* Set system clock divider to 1 */ - Chip_Clock_SetSysClockDiv(1); - - /* Setup FLASH access to 3 clocks */ - Chip_FMC_SetFLASHAccess(FLASHTIM_50MHZ_CPU); - - /* Set main clock source to the system PLL. This will drive 48MHz - for the main clock and 48MHz for the system clock */ - Chip_Clock_SetMainClockSource(SYSCTL_MAINCLKSRC_PLLOUT); - - /* Set USB PLL input to main oscillator */ - Chip_Clock_SetUSBPLLSource(SYSCTL_PLLCLKSRC_MAINOSC); - /* Setup USB PLL (FCLKIN = 12MHz) * 4 = 48MHz - MSEL = 3 (this is pre-decremented), PSEL = 1 (for P = 2) - FCLKOUT = FCLKIN * (MSEL + 1) = 12MHz * 4 = 48MHz - FCCO = FCLKOUT * 2 * P = 48MHz * 2 * 2 = 192MHz (within FCCO range) */ - Chip_Clock_SetupUSBPLL(3, 1); - - /* Powerup USB PLL */ - Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPLL_PD); - - /* Wait for PLL to lock */ - while (!Chip_Clock_IsUSBPLLLocked()) {} -} - -// Invoked by startup code -void SystemInit(void) -{ - SystemSetupClocking(); - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_RAM1); - - /* Enable IOCON clock */ - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); - for (uint32_t i = 0; i < (sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); i++) - { - Chip_IOCON_PinMuxSet(LPC_IOCON, pinmuxing[i].port, pinmuxing[i].pin, pinmuxing[i].modefunc); - } -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - - // USB: Setup PLL clock, and power - /* enable USB main clock */ - Chip_Clock_SetUSBClockSource(SYSCTL_USBCLKSRC_PLLOUT, 1); - /* Enable AHB clock to the USB block and USB RAM. */ - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USB); - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_USBRAM); - /* power UP USB Phy */ - Chip_SYSCTL_PowerUp(SYSCTL_POWERDOWN_USBPAD_PD); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/lpcxpresso11u68/board.mk b/hw/bsp/lpcxpresso11u68/board.mk deleted file mode 100644 index cd6ad3617..000000000 --- a/hw/bsp/lpcxpresso11u68/board.mk +++ /dev/null @@ -1,42 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -nostdlib \ - -DCORE_M0PLUS \ - -D__VTOR_PRESENT=0 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ - -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM3")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc11u6x/lpc_chip_11u6x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc11u68.ld - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc11u6x.c \ - $(MCU_DIR)/src/chip_11u6x.c \ - $(MCU_DIR)/src/clock_11u6x.c \ - $(MCU_DIR)/src/gpio_11u6x.c \ - $(MCU_DIR)/src/iocon_11u6x.c \ - $(MCU_DIR)/src/syscon_11u6x.c \ - $(MCU_DIR)/src/sysinit_11u6x.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = LPC11U68 - -# flash using pyocd -flash: $(BUILD)/$(PROJECT).hex - pyocd flash -t lpc11u68 $< diff --git a/hw/bsp/lpcxpresso11u68/lpc11u68.ld b/hw/bsp/lpcxpresso11u68/lpc11u68.ld deleted file mode 100644 index 4a35b192e..000000000 --- a/hw/bsp/lpcxpresso11u68/lpc11u68.ld +++ /dev/null @@ -1,242 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC11U68 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 4:55:54 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ - Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash256 = 0x0 ; /* MFlash256 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ - __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ - __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ - __base_RAM2 = 0x20000000 ; /* RAM2 */ - __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ - __base_RAM3 = 0x20004000 ; /* RAM3 */ - __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash256 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash256 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash256 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash256 - __exidx_end = .; - - _etext = .; - - /* possible MTB section for Ram1_2 */ - .mtb_buffer_RAM2 (NOLOAD) : - { - KEEP(*(.mtb.$RAM2*)) - KEEP(*(.mtb.$Ram1_2*)) - } > Ram1_2 - - /* DATA section for Ram1_2 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$Ram1_2) - *(.data.$RAM2*) - *(.data.$Ram1_2*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > Ram1_2 AT>MFlash256 - /* possible MTB section for Ram2USB_2 */ - .mtb_buffer_RAM3 (NOLOAD) : - { - KEEP(*(.mtb.$RAM3*)) - KEEP(*(.mtb.$Ram2USB_2*)) - } > Ram2USB_2 - - /* DATA section for Ram2USB_2 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$Ram2USB_2) - *(.data.$RAM3*) - *(.data.$Ram2USB_2*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > Ram2USB_2 AT>MFlash256 - /* MAIN DATA SECTION */ - /* Default MTB section */ - .mtb_buffer_default (NOLOAD) : - { - KEEP(*(.mtb*)) - } > Ram0_32 - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > Ram0_32 - - /* Main DATA section (Ram0_32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > Ram0_32 AT>MFlash256 - - /* BSS section for Ram1_2 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$Ram1_2*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > Ram1_2 - - /* BSS section for Ram2USB_2 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$Ram2USB_2*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > Ram2USB_2 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > Ram0_32 - - /* NOINIT section for Ram1_2 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$Ram1_2*) - . = ALIGN(4) ; - } > Ram1_2 - - /* NOINIT section for Ram2USB_2 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$Ram2USB_2*) - . = ALIGN(4) ; - } > Ram2USB_2 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > Ram0_32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) - ) - ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c b/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c deleted file mode 100644 index a04e43867..000000000 --- a/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 2 -#define LED_PIN 17 -#define LED_STATE_ON 0 - -// Wake up Switch -#define BUTTON_PORT 0 -#define BUTTON_PIN 16 -#define BUTTON_STATE_ACTIVE 0 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing table, only items that need changing from their default pin - state are in this table. Not every pin is mapped. */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {0, 3, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // USB VBUS - {0, 18, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 RX - {0, 19, (IOCON_FUNC1 | IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // UART0 TX - {2, 0, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALIN - {2, 1, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // XTALOUT -}; - -// Invoked by startup code -void SystemInit(void) -{ - /* Enable IOCON clock */ - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - - // USB: Setup PLL clock, and power - Chip_USB_Init(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif -- cgit v1.3.1 From 64c6b715cecb80788b23a5f8f07e256e1c96ed38 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 17:26:49 +0700 Subject: bsp lpc13 --- .github/workflows/build_arm.yml | 6 +- hw/bsp/lpc13/boards/lpcxpresso1347/board.mk | 13 ++ hw/bsp/lpc13/boards/lpcxpresso1347/lpc1347.ld | 225 +++++++++++++++++++++ .../lpc13/boards/lpcxpresso1347/lpcxpresso1347.c | 152 ++++++++++++++ hw/bsp/lpcxpresso1347/board.mk | 45 ----- hw/bsp/lpcxpresso1347/lpc1347.ld | 225 --------------------- hw/bsp/lpcxpresso1347/lpcxpresso1347.c | 152 -------------- 7 files changed, 393 insertions(+), 425 deletions(-) create mode 100644 hw/bsp/lpc13/boards/lpcxpresso1347/board.mk create mode 100644 hw/bsp/lpc13/boards/lpcxpresso1347/lpc1347.ld create mode 100644 hw/bsp/lpc13/boards/lpcxpresso1347/lpcxpresso1347.c delete mode 100644 hw/bsp/lpcxpresso1347/board.mk delete mode 100644 hw/bsp/lpcxpresso1347/lpc1347.ld delete mode 100644 hw/bsp/lpcxpresso1347/lpcxpresso1347.c diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 1a0e556e9..01b390ac8 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -35,7 +35,7 @@ jobs: - 'broadcom_32bit' - 'imxrt' - 'kinetis_k32 kinetis_kl' - - 'lpc11 lpc15 lpc18' + - 'lpc11 lpc13 lpc15 lpc18' - 'lpc54 lpc55' - 'mm32 msp432e4' - 'nrf' @@ -102,7 +102,7 @@ jobs: run: find examples/ -path "*stm32l412nucleo/*.elf" -exec mv {} . \; - name: Upload Artifacts for rp2040 - if: contains(matrix.family,'rp2040') && github.repository_owner == 'hathach') + if: contains(matrix.family,'rp2040') && github.repository_owner == 'hathach' uses: actions/upload-artifact@v3 with: name: rp2040 @@ -110,7 +110,7 @@ jobs: *.elf - name: Upload Artifacts for stm32l412nucleo - if: contains(matrix.family, 'stm32l4') && github.repository_owner == 'hathach') + if: contains(matrix.family, 'stm32l4') && github.repository_owner == 'hathach' uses: actions/upload-artifact@v3 with: name: stm32l4 diff --git a/hw/bsp/lpc13/boards/lpcxpresso1347/board.mk b/hw/bsp/lpc13/boards/lpcxpresso1347/board.mk new file mode 100644 index 000000000..31eb2f28f --- /dev/null +++ b/hw/bsp/lpc13/boards/lpcxpresso1347/board.mk @@ -0,0 +1,13 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +CFLAGS += \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/lpc1347.ld + +# For flash-jlink target +JLINK_DEVICE = LPC1347 + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/lpc13/boards/lpcxpresso1347/lpc1347.ld b/hw/bsp/lpc13/boards/lpcxpresso1347/lpc1347.ld new file mode 100644 index 000000000..a2111cd1c --- /dev/null +++ b/hw/bsp/lpc13/boards/lpcxpresso1347/lpc1347.ld @@ -0,0 +1,225 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1347 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:01:58 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash64 = 0x0 ; /* MFlash64 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ + __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash64 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash64 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash64 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash64 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamUsb2 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamUsb2) + *(.data.$RAM2*) + *(.data.$RamUsb2*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamUsb2 AT>MFlash64 + /* DATA section for RamPeriph2 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamPeriph2) + *(.data.$RAM3*) + *(.data.$RamPeriph2*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > RamPeriph2 AT>MFlash64 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc8 + + /* Main DATA section (RamLoc8) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc8 AT>MFlash64 + + /* BSS section for RamUsb2 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamUsb2*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamUsb2 + + /* BSS section for RamPeriph2 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3*) + *(.bss.$RamPeriph2*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > RamPeriph2 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc8 + + /* NOINIT section for RamUsb2 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamUsb2*) + . = ALIGN(4) ; + } > RamUsb2 + + /* NOINIT section for RamPeriph2 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM3*) + *(.noinit.$RamPeriph2*) + . = ALIGN(4) ; + } > RamPeriph2 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc8 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} diff --git a/hw/bsp/lpc13/boards/lpcxpresso1347/lpcxpresso1347.c b/hw/bsp/lpc13/boards/lpcxpresso1347/lpcxpresso1347.c new file mode 100644 index 000000000..8ee611037 --- /dev/null +++ b/hw/bsp/lpc13/boards/lpcxpresso1347/lpcxpresso1347.c @@ -0,0 +1,152 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 0 +#define LED_PIN 7 + +// Joytick Down if connected to LPCXpresso Base board +#define BUTTON_PORT 1 +#define BUTTON_PIN 20 + +//static const struct { +// uint8_t port; +// uint8_t pin; +//} buttons[] = +//{ +// {1, 22 }, // Joystick up +// {1, 20 }, // Joystick down +// {1, 23 }, // Joystick left +// {1, 21 }, // Joystick right +// {1, 19 }, // Joystick press +// {0, 1 }, // SW3 +//}; + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +/* Pin muxing table, only items that need changing from their default pin + state are in this table. */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {0, 1, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_1 used for CLKOUT */ + {0, 2, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_PULLUP)}, /* PIO0_2 used for SSEL */ + {0, 3, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_3 used for USB_VBUS */ + {0, 6, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */ + {0, 8, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_8 used for MISO0 */ + {0, 9, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_9 used for MOSI0 */ + {0, 11, (IOCON_FUNC2 | IOCON_ADMODE_EN | IOCON_FILT_DIS)}, /* PIO0_11 used for AD0 */ + {0, 18, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_18 used for RXD */ + {0, 19, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_19 used for TXD */ + {1, 29, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO1_29 used for SCK0 */ +}; + +// Invoked by startup code +void SystemInit(void) +{ + /* Enable IOCON clock */ + Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO_PORT); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); + + // USB: Setup PLL clock, and power + Chip_USB_Init(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // active low + return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} diff --git a/hw/bsp/lpcxpresso1347/board.mk b/hw/bsp/lpcxpresso1347/board.mk deleted file mode 100644 index 25d6fa7a3..000000000 --- a/hw/bsp/lpcxpresso1347/board.mk +++ /dev/null @@ -1,45 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_EXAMPLE_VIDEO_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_LPC13XX \ - -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -# startup.c and lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes -Wno-error=redundant-decls - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc1347.ld - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc13xx.c \ - $(MCU_DIR)/src/chip_13xx.c \ - $(MCU_DIR)/src/clock_13xx.c \ - $(MCU_DIR)/src/gpio_13xx_1.c \ - $(MCU_DIR)/src/iocon_13xx.c \ - $(MCU_DIR)/src/sysctl_13xx.c \ - $(MCU_DIR)/src/sysinit_13xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = LPC1347 - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/lpcxpresso1347/lpc1347.ld b/hw/bsp/lpcxpresso1347/lpc1347.ld deleted file mode 100644 index a2111cd1c..000000000 --- a/hw/bsp/lpcxpresso1347/lpc1347.ld +++ /dev/null @@ -1,225 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1347 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:01:58 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash64 = 0x0 ; /* MFlash64 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ - __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash64 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash64 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash64 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash64 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamUsb2 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamUsb2) - *(.data.$RAM2*) - *(.data.$RamUsb2*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamUsb2 AT>MFlash64 - /* DATA section for RamPeriph2 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamPeriph2) - *(.data.$RAM3*) - *(.data.$RamPeriph2*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamPeriph2 AT>MFlash64 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc8 - - /* Main DATA section (RamLoc8) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc8 AT>MFlash64 - - /* BSS section for RamUsb2 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamUsb2*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamUsb2 - - /* BSS section for RamPeriph2 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$RamPeriph2*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamPeriph2 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc8 - - /* NOINIT section for RamUsb2 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamUsb2*) - . = ALIGN(4) ; - } > RamUsb2 - - /* NOINIT section for RamPeriph2 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$RamPeriph2*) - . = ALIGN(4) ; - } > RamPeriph2 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc8 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/lpcxpresso1347/lpcxpresso1347.c b/hw/bsp/lpcxpresso1347/lpcxpresso1347.c deleted file mode 100644 index 8ee611037..000000000 --- a/hw/bsp/lpcxpresso1347/lpcxpresso1347.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 0 -#define LED_PIN 7 - -// Joytick Down if connected to LPCXpresso Base board -#define BUTTON_PORT 1 -#define BUTTON_PIN 20 - -//static const struct { -// uint8_t port; -// uint8_t pin; -//} buttons[] = -//{ -// {1, 22 }, // Joystick up -// {1, 20 }, // Joystick down -// {1, 23 }, // Joystick left -// {1, 21 }, // Joystick right -// {1, 19 }, // Joystick press -// {0, 1 }, // SW3 -//}; - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -/* Pin muxing table, only items that need changing from their default pin - state are in this table. */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {0, 1, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_1 used for CLKOUT */ - {0, 2, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_PULLUP)}, /* PIO0_2 used for SSEL */ - {0, 3, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_3 used for USB_VBUS */ - {0, 6, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_6 used for USB_CONNECT */ - {0, 8, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_8 used for MISO0 */ - {0, 9, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_9 used for MOSI0 */ - {0, 11, (IOCON_FUNC2 | IOCON_ADMODE_EN | IOCON_FILT_DIS)}, /* PIO0_11 used for AD0 */ - {0, 18, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_18 used for RXD */ - {0, 19, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_19 used for TXD */ - {1, 29, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO1_29 used for SCK0 */ -}; - -// Invoked by startup code -void SystemInit(void) -{ - /* Enable IOCON clock */ - Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - - // USB: Setup PLL clock, and power - Chip_USB_Init(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} -- cgit v1.3.1 From 1154b7a9e733fd6571c2a47e52d6d49da0b3b096 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 17:40:44 +0700 Subject: add mising lpc13 file --- hw/bsp/lpc13/family.mk | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 hw/bsp/lpc13/family.mk diff --git a/hw/bsp/lpc13/family.mk b/hw/bsp/lpc13/family.mk new file mode 100644 index 000000000..28f98e4ca --- /dev/null +++ b/hw/bsp/lpc13/family.mk @@ -0,0 +1,39 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -nostdlib \ + -DCORE_M3 \ + -D__USE_LPCOPEN \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_EXAMPLE_VIDEO_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_LPC13XX \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +# startup.c and lpc_types.h cause following errors +CFLAGS += -Wno-error=strict-prototypes -Wno-error=redundant-decls + +# caused by freeRTOS port !! +CFLAGS += -Wno-error=maybe-uninitialized + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc13xx.c \ + $(MCU_DIR)/src/chip_13xx.c \ + $(MCU_DIR)/src/clock_13xx.c \ + $(MCU_DIR)/src/gpio_13xx_1.c \ + $(MCU_DIR)/src/iocon_13xx.c \ + $(MCU_DIR)/src/sysctl_13xx.c \ + $(MCU_DIR)/src/sysinit_13xx.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 -- cgit v1.3.1 From 934baae9b8dd58dd17881ef8ad8bd3428b208b1f Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 17:58:20 +0700 Subject: bsp lpc51 --- .github/workflows/build_arm.yml | 2 +- hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk | 37 +++++ .../lpc51/boards/lpcxpresso51u68/lpcxpresso51u68.c | 179 +++++++++++++++++++++ hw/bsp/lpc51/family.mk | 45 ++++++ hw/bsp/lpcxpresso51u68/board.mk | 52 ------ hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c | 179 --------------------- 6 files changed, 262 insertions(+), 232 deletions(-) create mode 100644 hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk create mode 100644 hw/bsp/lpc51/boards/lpcxpresso51u68/lpcxpresso51u68.c create mode 100644 hw/bsp/lpc51/family.mk delete mode 100644 hw/bsp/lpcxpresso51u68/board.mk delete mode 100644 hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 01b390ac8..2b64e5410 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -36,7 +36,7 @@ jobs: - 'imxrt' - 'kinetis_k32 kinetis_kl' - 'lpc11 lpc13 lpc15 lpc18' - - 'lpc54 lpc55' + - 'lpc51 lpc54 lpc55' - 'mm32 msp432e4' - 'nrf' - 'ra' diff --git a/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk new file mode 100644 index 000000000..27b9b371f --- /dev/null +++ b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk @@ -0,0 +1,37 @@ +MCU = LPC51U68 + +CFLAGS += \ + -DCPU_LPC51U68JBD64 \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/system_LPC51U68.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_power.c \ + $(MCU_DIR)/drivers/fsl_reset.c \ + $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_usart.c + +INC += \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm \ + $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ + $(TOP)/$(SDK_DIR)/drivers/lpc_gpio + +SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +JLINK_DEVICE = LPC51U68 +PYOCD_TARGET = LPC51U68 + +# flash using pyocd (51u68 is not supported yet) +flash: flash-pyocd diff --git a/hw/bsp/lpc51/boards/lpcxpresso51u68/lpcxpresso51u68.c b/hw/bsp/lpc51/boards/lpcxpresso51u68/lpcxpresso51u68.c new file mode 100644 index 000000000..c94b0d6d8 --- /dev/null +++ b/hw/bsp/lpc51/boards/lpcxpresso51u68/lpcxpresso51u68.c @@ -0,0 +1,179 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_power.h" +#include "fsl_iocon.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 0 +#define LED_PIN 29 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 0 +#define BUTTON_PIN 24 + +// IOCON pin mux +#define IOCON_PIO_DIGITAL_EN 0x80u /*!< Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!< Selects pin function 1 */ +#define IOCON_PIO_FUNC7 0x07u /*!< Selects pin function 7 */ +#define IOCON_PIO_INPFILT_OFF 0x0100u /*!< Input filter disabled */ +#define IOCON_PIO_INV_DI 0x00u /*!< Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!< No addition pin function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!< Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!< Standard mode, output slew rate control is enabled */ + +/**************************************************************** +name: BOARD_BootClockFROHF96M +outputs: +- {id: SYSTICK_clock.outFreq, value: 96 MHz} +- {id: System_clock.outFreq, value: 96 MHz} +settings: +- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf} +sources: +- {id: SYSCON.fro_hf.outFreq, value: 96 MHz} +******************************************************************/ +void BootClockFROHF96M(void) +{ + /*!< Set up the clock sources */ + /*!< Set up FRO */ + POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on */ + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without + accidentally being below the voltage for current speed */ + POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ + CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ + + CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */ + + /*!< Set up dividers */ + CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 0U, true); /*!< Reset SYSTICKCLKDIV divider counter and halt it */ + CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 1U, false); /*!< Set SYSTICKCLKDIV divider to value 1 */ + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ + /*!< Set SystemCoreClock variable. */ + SystemCoreClock = 96000000U; +} + +void board_init(void) +{ + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iocon); + + // Enable GPIO0 clock + CLOCK_EnableClock(kCLOCK_Gpio0); + + // Init 96 MHz clock + BootClockFROHF96M(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + GPIO_PortInit(GPIO, LED_PORT); + GPIO_PortInit(GPIO, BUTTON_PORT); + + // LED + gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0}; + GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; + GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); + + // USB + const uint32_t port1_pin6_config = ( + IOCON_PIO_FUNC7 | /* Pin is configured as USB0_VBUS */ + IOCON_PIO_MODE_INACT | /* No addition pin function */ + IOCON_PIO_INV_DI | /* Input function is not inverted */ + IOCON_PIO_DIGITAL_EN | /* Enables digital function */ + IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ + IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ + ); + IOCON_PinMuxSet(IOCON, 1, 6, port1_pin6_config); /* PORT1 PIN6 (coords: 26) is configured as USB0_VBUS */ + + POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*Turn on USB Phy */ + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */ +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return 1-GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/lpc51/family.mk b/hw/bsp/lpc51/family.mk new file mode 100644 index 000000000..8a64f0945 --- /dev/null +++ b/hw/bsp/lpc51/family.mk @@ -0,0 +1,45 @@ +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) + +MCU_DIR = $(SDK_DIR)/devices/$(MCU) +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -DCFG_TUSB_MCU=OPT_MCU_LPC51UXX \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/$(MCU)_flash.ld + +SRC_C += \ + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ + $(MCU_DIR)/system_$(MCU).c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_power.c \ + $(MCU_DIR)/drivers/fsl_reset.c \ + $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ + $(SDK_DIR)/drivers/flexcomm/fsl_usart.c + +INC += \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm \ + $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ + $(TOP)/$(SDK_DIR)/drivers/lpc_gpio + +SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/lpcxpresso51u68/board.mk b/hw/bsp/lpcxpresso51u68/board.mk deleted file mode 100644 index b1a126c51..000000000 --- a/hw/bsp/lpcxpresso51u68/board.mk +++ /dev/null @@ -1,52 +0,0 @@ -SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += $(SDK_DIR) - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -DCPU_LPC51U68JBD64 \ - -DCFG_TUSB_MCU=OPT_MCU_LPC51UXX \ - -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -MCU_DIR = $(SDK_DIR)/devices/LPC51U68 - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/LPC51U68_flash.ld - -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/system_LPC51U68.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_power.c \ - $(MCU_DIR)/drivers/fsl_reset.c \ - $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_usart.c - -INC += \ - $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/flexcomm \ - $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ - $(TOP)/$(SDK_DIR)/drivers/lpc_gpio - -SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S - -LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -JLINK_DEVICE = LPC51U68 -PYOCD_TARGET = LPC51U68 - -# flash using pyocd (51u68 is not supported yet) -flash: flash-pyocd diff --git a/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c b/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c deleted file mode 100644 index c94b0d6d8..000000000 --- a/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "fsl_device_registers.h" -#include "fsl_gpio.h" -#include "fsl_power.h" -#include "fsl_iocon.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 0 -#define LED_PIN 29 -#define LED_STATE_ON 0 - -// WAKE button -#define BUTTON_PORT 0 -#define BUTTON_PIN 24 - -// IOCON pin mux -#define IOCON_PIO_DIGITAL_EN 0x80u /*!< Enables digital function */ -#define IOCON_PIO_FUNC1 0x01u /*!< Selects pin function 1 */ -#define IOCON_PIO_FUNC7 0x07u /*!< Selects pin function 7 */ -#define IOCON_PIO_INPFILT_OFF 0x0100u /*!< Input filter disabled */ -#define IOCON_PIO_INV_DI 0x00u /*!< Input function is not inverted */ -#define IOCON_PIO_MODE_INACT 0x00u /*!< No addition pin function */ -#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!< Open drain is disabled */ -#define IOCON_PIO_SLEW_STANDARD 0x00u /*!< Standard mode, output slew rate control is enabled */ - -/**************************************************************** -name: BOARD_BootClockFROHF96M -outputs: -- {id: SYSTICK_clock.outFreq, value: 96 MHz} -- {id: System_clock.outFreq, value: 96 MHz} -settings: -- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf} -sources: -- {id: SYSCON.fro_hf.outFreq, value: 96 MHz} -******************************************************************/ -void BootClockFROHF96M(void) -{ - /*!< Set up the clock sources */ - /*!< Set up FRO */ - POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on */ - CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without - accidentally being below the voltage for current speed */ - POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */ - CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */ - - CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */ - - /*!< Set up dividers */ - CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 0U, true); /*!< Reset SYSTICKCLKDIV divider counter and halt it */ - CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 1U, false); /*!< Set SYSTICKCLKDIV divider to value 1 */ - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */ - /*!< Set SystemCoreClock variable. */ - SystemCoreClock = 96000000U; -} - -void board_init(void) -{ - // Enable IOCON clock - CLOCK_EnableClock(kCLOCK_Iocon); - - // Enable GPIO0 clock - CLOCK_EnableClock(kCLOCK_Gpio0); - - // Init 96 MHz clock - BootClockFROHF96M(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - GPIO_PortInit(GPIO, LED_PORT); - GPIO_PortInit(GPIO, BUTTON_PORT); - - // LED - gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0}; - GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); - board_led_write(true); - - // Button - gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; - GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); - - // USB - const uint32_t port1_pin6_config = ( - IOCON_PIO_FUNC7 | /* Pin is configured as USB0_VBUS */ - IOCON_PIO_MODE_INACT | /* No addition pin function */ - IOCON_PIO_INV_DI | /* Input function is not inverted */ - IOCON_PIO_DIGITAL_EN | /* Enables digital function */ - IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ - IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ - ); - IOCON_PinMuxSet(IOCON, 1, 6, port1_pin6_config); /* PORT1 PIN6 (coords: 26) is configured as USB0_VBUS */ - - POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*Turn on USB Phy */ - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */ -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - // active low - return 1-GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif -- cgit v1.3.1 From f75a019732c266a5c1eede1c763389210e8bc79d Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 18:03:18 +0700 Subject: bsp lpc17 --- .github/workflows/build_arm.yml | 2 +- hw/bsp/lpc17/boards/lpcxpresso1769/board.mk | 8 + hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld | 184 ++++++++++++++++++ .../lpc17/boards/lpcxpresso1769/lpcxpresso1769.c | 209 +++++++++++++++++++++ hw/bsp/lpc17/boards/mbed1768/board.mk | 9 + hw/bsp/lpc17/boards/mbed1768/lpc1768.ld | 184 ++++++++++++++++++ hw/bsp/lpc17/boards/mbed1768/mbed1768.c | 197 +++++++++++++++++++ hw/bsp/lpc17/family.mk | 40 ++++ hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk | 26 --- hw/bsp/lpcxpresso1769/board.mk | 43 ----- hw/bsp/lpcxpresso1769/lpc1769.ld | 184 ------------------ hw/bsp/lpcxpresso1769/lpcxpresso1769.c | 209 --------------------- hw/bsp/mbed1768/board.mk | 44 ----- hw/bsp/mbed1768/lpc1768.ld | 184 ------------------ hw/bsp/mbed1768/mbed1768.c | 197 ------------------- 15 files changed, 832 insertions(+), 888 deletions(-) create mode 100644 hw/bsp/lpc17/boards/lpcxpresso1769/board.mk create mode 100644 hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld create mode 100644 hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c create mode 100644 hw/bsp/lpc17/boards/mbed1768/board.mk create mode 100644 hw/bsp/lpc17/boards/mbed1768/lpc1768.ld create mode 100644 hw/bsp/lpc17/boards/mbed1768/mbed1768.c create mode 100644 hw/bsp/lpc17/family.mk delete mode 100644 hw/bsp/lpcxpresso1769/board.mk delete mode 100644 hw/bsp/lpcxpresso1769/lpc1769.ld delete mode 100644 hw/bsp/lpcxpresso1769/lpcxpresso1769.c delete mode 100644 hw/bsp/mbed1768/board.mk delete mode 100644 hw/bsp/mbed1768/lpc1768.ld delete mode 100644 hw/bsp/mbed1768/mbed1768.c diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 2b64e5410..a62d587ce 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -35,7 +35,7 @@ jobs: - 'broadcom_32bit' - 'imxrt' - 'kinetis_k32 kinetis_kl' - - 'lpc11 lpc13 lpc15 lpc18' + - 'lpc11 lpc13 lpc15 lpc17 lpc18' - 'lpc51 lpc54 lpc55' - 'mm32 msp432e4' - 'nrf' diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/board.mk b/hw/bsp/lpc17/boards/lpcxpresso1769/board.mk new file mode 100644 index 000000000..e22c4f64b --- /dev/null +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/board.mk @@ -0,0 +1,8 @@ +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/lpc1769.ld + +# For flash-jlink target +JLINK_DEVICE = LPC1769 + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld b/hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld new file mode 100644 index 000000000..095bd3d92 --- /dev/null +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld @@ -0,0 +1,184 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1769 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamAHB32 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamAHB32) + *(.data.$RAM2*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamAHB32 AT>MFlash512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlash512 + + /* BSS section for RamAHB32 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamAHB32 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c new file mode 100644 index 000000000..24333ad1a --- /dev/null +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c @@ -0,0 +1,209 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUD_ENABLED + tud_int_handler(0); + #endif + + #if CFG_TUH_ENABLED + tuh_int_handler(0); + #endif +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 0 +#define LED_PIN 22 +#define LED_STATE_ON 1 + +// JOYSTICK_DOWN if using LPCXpresso Base Board +#define BUTTON_PORT 0 +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +#define BOARD_UART_PORT LPC_UART3 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t RTCOscRateIn = 32768; + +/* Pin muxing configuration */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {0, 0, IOCON_MODE_INACT | IOCON_FUNC2}, /* TXD3 */ + {0, 1, IOCON_MODE_INACT | IOCON_FUNC2}, /* RXD3 */ + {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, /* Led 0 */ + + /* Joystick buttons. */ +// {2, 3, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_UP */ + {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, /* JOYSTICK_DOWN */ +// {2, 4, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_LEFT */ +// {0, 16, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_RIGHT */ +// {0, 17, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_PRESS */ +}; + +static const PINMUX_GRP_T pin_usb_mux[] = +{ + {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ + {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- + {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Soft Connect + + {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR (Host mode) + + // VBUS is not connected on this board, so leave the pin at default setting. + /// Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2); // USB VBUS +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif + + Chip_IOCON_Init(LPC_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); + + Chip_SYSCTL_SetFLASHAccess(FLASHTIM_100MHZ_CPU); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + +#if 0 + //------------- UART -------------// + PINSEL_CFG_Type PinCfg = + { + .Portnum = 0, + .Pinnum = 0, // TXD is P0.0 + .Funcnum = 2, + .OpenDrain = 0, + .Pinmode = 0 + }; + PINSEL_ConfigPin(&PinCfg); + + PinCfg.Portnum = 0; + PinCfg.Pinnum = 1; // RXD is P0.1 + PINSEL_ConfigPin(&PinCfg); + + UART_CFG_Type UARTConfigStruct; + UART_ConfigStructInit(&UARTConfigStruct); + UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; + + UART_Init(BOARD_UART_PORT, &UARTConfigStruct); + UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit +#endif + + //------------- USB -------------// + Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); + Chip_USB_Init(); + + enum { + USBCLK_DEVCIE = 0x12, // AHB + Device + USBCLK_HOST = 0x19, // AHB + Host + OTG +// 0x1B // Host + Device + OTG + AHB + }; + + uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; + + LPC_USB->OTGClkCtrl = clk_en; + while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); + +#if CFG_TUH_ENABLED + // set portfunc to host !!! + LPC_USB->StCtrl = 0x3; // should be 1 +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ +// return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ +// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/lpc17/boards/mbed1768/board.mk b/hw/bsp/lpc17/boards/mbed1768/board.mk new file mode 100644 index 000000000..a982a970b --- /dev/null +++ b/hw/bsp/lpc17/boards/mbed1768/board.mk @@ -0,0 +1,9 @@ +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/lpc1768.ld + +# For flash-jlink target +JLINK_DEVICE = LPC1768 +PYOCD_TARGET = lpc1768 + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/lpc17/boards/mbed1768/lpc1768.ld b/hw/bsp/lpc17/boards/mbed1768/lpc1768.ld new file mode 100644 index 000000000..095bd3d92 --- /dev/null +++ b/hw/bsp/lpc17/boards/mbed1768/lpc1768.ld @@ -0,0 +1,184 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1769 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamAHB32 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamAHB32) + *(.data.$RAM2*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamAHB32 AT>MFlash512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlash512 + + /* BSS section for RamAHB32 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamAHB32 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} diff --git a/hw/bsp/lpc17/boards/mbed1768/mbed1768.c b/hw/bsp/lpc17/boards/mbed1768/mbed1768.c new file mode 100644 index 000000000..9f3d294d3 --- /dev/null +++ b/hw/bsp/lpc17/boards/mbed1768/mbed1768.c @@ -0,0 +1,197 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +#define LED_PORT 1 +#define LED_PIN 18 +#define LED_STATE_ON 1 + +// JOYSTICK_DOWN if using LPCXpresso Base Board +#define BUTTON_PORT 0 +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +#define BOARD_UART_PORT LPC_UART3 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 10000000; +const uint32_t RTCOscRateIn = 32768; + +/* Pin muxing configuration */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, + {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, +}; + +static const PINMUX_GRP_T pin_usb_mux[] = +{ + {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ + {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- + {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Connect + + {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR + {1, 22, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PWRD + + /* VBUS is not connected on this board, so leave the pin at default setting. */ + /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */ +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif + + Chip_IOCON_Init(LPC_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + +#if 0 + //------------- UART -------------// + PINSEL_CFG_Type PinCfg = + { + .Portnum = 0, + .Pinnum = 0, // TXD is P0.0 + .Funcnum = 2, + .OpenDrain = 0, + .Pinmode = 0 + }; + PINSEL_ConfigPin(&PinCfg); + + PinCfg.Portnum = 0; + PinCfg.Pinnum = 1; // RXD is P0.1 + PINSEL_ConfigPin(&PinCfg); + + UART_CFG_Type UARTConfigStruct; + UART_ConfigStructInit(&UARTConfigStruct); + UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; + + UART_Init(BOARD_UART_PORT, &UARTConfigStruct); + UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit +#endif + + //------------- USB -------------// + Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); + Chip_USB_Init(); + + enum { + USBCLK_DEVCIE = 0x12, // AHB + Device + USBCLK_HOST = 0x19, // AHB + Host + OTG +// 0x1B // Host + Device + OTG + AHB + }; + + uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; + + LPC_USB->OTGClkCtrl = clk_en; + while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); + +#if CFG_TUH_ENABLED + // set portfunc to host !!! + LPC_USB->StCtrl = 0x3; // should be 1 +#endif +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUD_ENABLED + tud_int_handler(0); + #endif + + #if CFG_TUH_ENABLED + tuh_int_handler(0); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ +// return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ +// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk new file mode 100644 index 000000000..af01b55a8 --- /dev/null +++ b/hw/bsp/lpc17/family.mk @@ -0,0 +1,40 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -nostdlib \ + -DCORE_M3 \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ + -DRTC_EV_SUPPORT=0 + +# lpc_types.h cause following errors +CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual + +# caused by freeRTOS port !! +CFLAGS += -Wno-error=maybe-uninitialized + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x + +SRC_C += \ + src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ + $(MCU_DIR)/src/chip_17xx_40xx.c \ + $(MCU_DIR)/src/clock_17xx_40xx.c \ + $(MCU_DIR)/src/gpio_17xx_40xx.c \ + $(MCU_DIR)/src/iocon_17xx_40xx.c \ + $(MCU_DIR)/src/sysctl_17xx_40xx.c \ + $(MCU_DIR)/src/sysinit_17xx_40xx.c \ + $(MCU_DIR)/src/uart_17xx_40xx.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk index 27b9b371f..5627cb024 100644 --- a/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk +++ b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk @@ -4,32 +4,6 @@ CFLAGS += \ -DCPU_LPC51U68JBD64 \ -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/system_LPC51U68.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_power.c \ - $(MCU_DIR)/drivers/fsl_reset.c \ - $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_usart.c - -INC += \ - $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/flexcomm \ - $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ - $(TOP)/$(SDK_DIR)/drivers/lpc_gpio - -SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S - -LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - JLINK_DEVICE = LPC51U68 PYOCD_TARGET = LPC51U68 diff --git a/hw/bsp/lpcxpresso1769/board.mk b/hw/bsp/lpcxpresso1769/board.mk deleted file mode 100644 index d459c8b7b..000000000 --- a/hw/bsp/lpcxpresso1769/board.mk +++ /dev/null @@ -1,43 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ - -DRTC_EV_SUPPORT=0 - -# lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc1769.ld - -SRC_C += \ - src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ - $(MCU_DIR)/src/chip_17xx_40xx.c \ - $(MCU_DIR)/src/clock_17xx_40xx.c \ - $(MCU_DIR)/src/gpio_17xx_40xx.c \ - $(MCU_DIR)/src/iocon_17xx_40xx.c \ - $(MCU_DIR)/src/sysctl_17xx_40xx.c \ - $(MCU_DIR)/src/sysinit_17xx_40xx.c \ - $(MCU_DIR)/src/uart_17xx_40xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = LPC1769 - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/lpcxpresso1769/lpc1769.ld b/hw/bsp/lpcxpresso1769/lpc1769.ld deleted file mode 100644 index 095bd3d92..000000000 --- a/hw/bsp/lpcxpresso1769/lpc1769.ld +++ /dev/null @@ -1,184 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1769 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamAHB32 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamAHB32) - *(.data.$RAM2*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamAHB32 AT>MFlash512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlash512 - - /* BSS section for RamAHB32 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c deleted file mode 100644 index 24333ad1a..000000000 --- a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - #if CFG_TUD_ENABLED - tud_int_handler(0); - #endif - - #if CFG_TUH_ENABLED - tuh_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 0 -#define LED_PIN 22 -#define LED_STATE_ON 1 - -// JOYSTICK_DOWN if using LPCXpresso Base Board -#define BUTTON_PORT 0 -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -#define BOARD_UART_PORT LPC_UART3 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing configuration */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {0, 0, IOCON_MODE_INACT | IOCON_FUNC2}, /* TXD3 */ - {0, 1, IOCON_MODE_INACT | IOCON_FUNC2}, /* RXD3 */ - {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, /* Led 0 */ - - /* Joystick buttons. */ -// {2, 3, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_UP */ - {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, /* JOYSTICK_DOWN */ -// {2, 4, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_LEFT */ -// {0, 16, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_RIGHT */ -// {0, 17, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_PRESS */ -}; - -static const PINMUX_GRP_T pin_usb_mux[] = -{ - {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ - {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- - {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Soft Connect - - {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR (Host mode) - - // VBUS is not connected on this board, so leave the pin at default setting. - /// Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2); // USB VBUS -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; -#endif - - Chip_IOCON_Init(LPC_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); - - Chip_SYSCTL_SetFLASHAccess(FLASHTIM_100MHZ_CPU); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - -#if 0 - //------------- UART -------------// - PINSEL_CFG_Type PinCfg = - { - .Portnum = 0, - .Pinnum = 0, // TXD is P0.0 - .Funcnum = 2, - .OpenDrain = 0, - .Pinmode = 0 - }; - PINSEL_ConfigPin(&PinCfg); - - PinCfg.Portnum = 0; - PinCfg.Pinnum = 1; // RXD is P0.1 - PINSEL_ConfigPin(&PinCfg); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit -#endif - - //------------- USB -------------// - Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); - Chip_USB_Init(); - - enum { - USBCLK_DEVCIE = 0x12, // AHB + Device - USBCLK_HOST = 0x19, // AHB + Host + OTG -// 0x1B // Host + Device + OTG + AHB - }; - - uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; - - LPC_USB->OTGClkCtrl = clk_en; - while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); - -#if CFG_TUH_ENABLED - // set portfunc to host !!! - LPC_USB->StCtrl = 0x3; // should be 1 -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ -// return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ -// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/mbed1768/board.mk b/hw/bsp/mbed1768/board.mk deleted file mode 100644 index 6940bbb55..000000000 --- a/hw/bsp/mbed1768/board.mk +++ /dev/null @@ -1,44 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ - -DRTC_EV_SUPPORT=0 - -# startup.c and lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc1768.ld - -SRC_C += \ - src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ - $(MCU_DIR)/src/chip_17xx_40xx.c \ - $(MCU_DIR)/src/clock_17xx_40xx.c \ - $(MCU_DIR)/src/gpio_17xx_40xx.c \ - $(MCU_DIR)/src/iocon_17xx_40xx.c \ - $(MCU_DIR)/src/sysctl_17xx_40xx.c \ - $(MCU_DIR)/src/sysinit_17xx_40xx.c \ - $(MCU_DIR)/src/uart_17xx_40xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = LPC1768 - -# flash using pyocd -flash: $(BUILD)/$(PROJECT).hex - pyocd flash -t lpc1768 $< diff --git a/hw/bsp/mbed1768/lpc1768.ld b/hw/bsp/mbed1768/lpc1768.ld deleted file mode 100644 index 095bd3d92..000000000 --- a/hw/bsp/mbed1768/lpc1768.ld +++ /dev/null @@ -1,184 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1769 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamAHB32 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamAHB32) - *(.data.$RAM2*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamAHB32 AT>MFlash512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlash512 - - /* BSS section for RamAHB32 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/mbed1768/mbed1768.c b/hw/bsp/mbed1768/mbed1768.c deleted file mode 100644 index 9f3d294d3..000000000 --- a/hw/bsp/mbed1768/mbed1768.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -#define LED_PORT 1 -#define LED_PIN 18 -#define LED_STATE_ON 1 - -// JOYSTICK_DOWN if using LPCXpresso Base Board -#define BUTTON_PORT 0 -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -#define BOARD_UART_PORT LPC_UART3 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 10000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing configuration */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, - {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, -}; - -static const PINMUX_GRP_T pin_usb_mux[] = -{ - {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ - {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- - {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Connect - - {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR - {1, 22, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PWRD - - /* VBUS is not connected on this board, so leave the pin at default setting. */ - /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */ -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; -#endif - - Chip_IOCON_Init(LPC_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - -#if 0 - //------------- UART -------------// - PINSEL_CFG_Type PinCfg = - { - .Portnum = 0, - .Pinnum = 0, // TXD is P0.0 - .Funcnum = 2, - .OpenDrain = 0, - .Pinmode = 0 - }; - PINSEL_ConfigPin(&PinCfg); - - PinCfg.Portnum = 0; - PinCfg.Pinnum = 1; // RXD is P0.1 - PINSEL_ConfigPin(&PinCfg); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit -#endif - - //------------- USB -------------// - Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); - Chip_USB_Init(); - - enum { - USBCLK_DEVCIE = 0x12, // AHB + Device - USBCLK_HOST = 0x19, // AHB + Host + OTG -// 0x1B // Host + Device + OTG + AHB - }; - - uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; - - LPC_USB->OTGClkCtrl = clk_en; - while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); - -#if CFG_TUH_ENABLED - // set portfunc to host !!! - LPC_USB->StCtrl = 0x3; // should be 1 -#endif -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - #if CFG_TUD_ENABLED - tud_int_handler(0); - #endif - - #if CFG_TUH_ENABLED - tuh_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ -// return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ -// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif -- cgit v1.3.1 From f58da311453b13808db775f27337345bcbdf9aba Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 18:12:03 +0700 Subject: clean up --- .github/workflows/build_arm.yml | 36 ------------------------------------ 1 file changed, 36 deletions(-) diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index a62d587ce..b60d12a98 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -117,42 +117,6 @@ jobs: path: | *.elf - - # --------------------------------------- - # Build all no-family (orphaned) boards - # disable this workflow since it is often failed randomly - # --------------------------------------- - build-board: - runs-on: ubuntu-latest - if: false - strategy: - fail-fast: false - matrix: - example: - # Alphabetical order, a group of 4 - - 'device/audio_test device/board_test device/cdc_dual_ports device/cdc_msc' - - 'device/cdc_msc_freertos device/dfu_runtime device/hid_composite device/hid_composite_freertos' - - 'device/hid_generic_inout device/hid_multiple_interface device/midi_test device/msc_dual_lun' - - 'device/net_lwip_webserver' - - 'device/uac2_headset device/usbtmc device/webusb_serial host/cdc_msc_hid' - - steps: - - name: Setup Python - uses: actions/setup-python@v4 - with: - python-version: '3.x' - - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '11.2-2022.02' - - - name: Checkout TinyUSB - uses: actions/checkout@v3 - - - name: Build - run: python3 tools/build_board.py ${{ matrix.example }} - # --------------------------------------- # Hardware in the loop (HIL) # Current self-hosted instance is running on an RPI4 with -- cgit v1.3.1