From daf9d06c0e54c0866174ae7d0b2ef266812dc1d6 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 29 Nov 2020 20:44:35 +0700 Subject: move teensy 4.0 to imxrt --- hw/bsp/imxrt/boards/teensy_40/board.h | 52 ++++ hw/bsp/imxrt/boards/teensy_40/board.mk | 10 + .../boards/teensy_40/teensy40_flexspi_nor_config.c | 49 ++++ .../boards/teensy_40/teensy40_flexspi_nor_config.h | 268 +++++++++++++++++++++ hw/bsp/teensy_40/board.h | 36 --- hw/bsp/teensy_40/board.mk | 52 ---- hw/bsp/teensy_40/teensy40.c | 186 -------------- hw/bsp/teensy_40/teensy40_flexspi_nor_config.c | 49 ---- hw/bsp/teensy_40/teensy40_flexspi_nor_config.h | 268 --------------------- 9 files changed, 379 insertions(+), 591 deletions(-) create mode 100644 hw/bsp/imxrt/boards/teensy_40/board.h create mode 100644 hw/bsp/imxrt/boards/teensy_40/board.mk create mode 100644 hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c create mode 100644 hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h delete mode 100644 hw/bsp/teensy_40/board.h delete mode 100644 hw/bsp/teensy_40/board.mk delete mode 100644 hw/bsp/teensy_40/teensy40.c delete mode 100644 hw/bsp/teensy_40/teensy40_flexspi_nor_config.c delete mode 100644 hw/bsp/teensy_40/teensy40_flexspi_nor_config.h diff --git a/hw/bsp/imxrt/boards/teensy_40/board.h b/hw/bsp/imxrt/boards/teensy_40/board.h new file mode 100644 index 000000000..b3cc0a8c5 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_40/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (2 * 1024 * 1024) + +// LED +#define LED_PINMUX IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13 +#define LED_PORT GPIO2 +#define LED_PIN 3 +#define LED_STATE_ON 0 + +// no button +#define BUTTON_PINMUX IOMUXC_GPIO_B0_01_GPIO2_IO01 // D12 +#define BUTTON_PORT GPIO2 +#define BUTTON_PIN 1 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART6 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_03_LPUART6_RX // D0 +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_02_LPUART6_TX // D1 + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/teensy_40/board.mk b/hw/bsp/imxrt/boards/teensy_40/board.mk new file mode 100644 index 000000000..02f77193f --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_40/board.mk @@ -0,0 +1,10 @@ +CFLAGS += -DCPU_MIMXRT1062DVL6A +MCU_VARIANT = MIMXRT1062 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1062xxx6A + +# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli +# Make sure it is in your PATH +flash: $(BUILD)/$(BOARD)-firmware.hex + teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c b/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c new file mode 100644 index 000000000..7929906eb --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c @@ -0,0 +1,49 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 2u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h b/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h new file mode 100644 index 000000000..56068ec6a --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__ +#define __TEENSY40_FLEXSPI_NOR_CONFIG__ + +#include +#include +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, + kFlexSpiSerialClk_166MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/teensy_40/board.h b/hw/bsp/teensy_40/board.h deleted file mode 100644 index c5338e274..000000000 --- a/hw/bsp/teensy_40/board.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - - -// required since iMX RT10xx SDK include this file for board size -#define BOARD_FLASH_SIZE (2 * 1024 * 1024) - - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/teensy_40/board.mk b/hw/bsp/teensy_40/board.mk deleted file mode 100644 index e49f13a1f..000000000 --- a/hw/bsp/teensy_40/board.mk +++ /dev/null @@ -1,52 +0,0 @@ -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ - -D__ARMVFP__=0 -D__ARMFPV5__=0\ - -DCPU_MIMXRT1062DVL6A \ - -DXIP_EXTERNAL_FLASH=1 \ - -DXIP_BOOT_HEADER_ENABLE=1 \ - -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1062 - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/MIMXRT1062xxxxx_flexspi_nor.ld - -SRC_C += \ - $(MCU_DIR)/system_MIMXRT1062.c \ - $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ - $(MCU_DIR)/project_template/clock_config.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_gpio.c \ - $(MCU_DIR)/drivers/fsl_common.c \ - $(MCU_DIR)/drivers/fsl_lpuart.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(MCU_DIR)/project_template \ - -SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1062.S - -# For TinyUSB port source -VENDOR = nxp -CHIP_FAMILY = transdimension - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 - -# For flash-jlink target -JLINK_DEVICE = MIMXRT1062xxx6A - -# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli -# Make sure it is in your PATH -flash: $(BUILD)/$(BOARD)-firmware.hex - teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/hw/bsp/teensy_40/teensy40.c b/hw/bsp/teensy_40/teensy40.c deleted file mode 100644 index 85501df11..000000000 --- a/hw/bsp/teensy_40/teensy40.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "fsl_device_registers.h" -#include "fsl_gpio.h" -#include "fsl_iomuxc.h" -#include "fsl_clock.h" -#include "fsl_lpuart.h" - -#include "clock_config.h" - -#define LED_PINMUX IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13 -#define LED_PORT GPIO2 -#define LED_PIN 3 -#define LED_STATE_ON 0 - -// no button -#define BUTTON_PINMUX IOMUXC_GPIO_B0_01_GPIO2_IO01 // D12 -#define BUTTON_PORT GPIO2 -#define BUTTON_PIN 1 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART6 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_03_LPUART6_RX // D0 -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_02_LPUART6_TX // D1 - -// needed by fsl_flexspi_nor_boot -const uint8_t dcd_data[] = { 0x00 }; - -void board_init(void) -{ - // Init clock - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - - // Enable IOCON clock - CLOCK_EnableClock(kCLOCK_Iomuxc); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) -// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - // LED - IOMUXC_SetPinMux( LED_PINMUX, 0U); - IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); - - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; - GPIO_PinInit(LED_PORT, LED_PIN, &led_config); - board_led_write(true); - - // Button - IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); - IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U); - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_NoIntmode }; - GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); - - // UART - IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); - IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); - IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); - IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); - - lpuart_config_t uart_config; - LPUART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U)); - - //------------- USB0 -------------// - // Clock - CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); - CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); - - USBPHY_Type* usb_phy = USBPHY1; - - // Enable PHY support for Low speed device + LS via FS Hub - usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; - - // Enable all power for normal operation - usb_phy->PWD = 0; - - // TX Timing - uint32_t phytx = usb_phy->TX; - phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); - phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); - usb_phy->TX = phytx; - - // USB1 -// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U); -// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U); -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_OTG1_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -void USB_OTG2_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); - #endif - - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - // active low - return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPUART_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/teensy_40/teensy40_flexspi_nor_config.c b/hw/bsp/teensy_40/teensy40_flexspi_nor_config.c deleted file mode 100644 index dbedc90a0..000000000 --- a/hw/bsp/teensy_40/teensy40_flexspi_nor_config.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include "teensy40_flexspi_nor_config.h" - -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_board" -#endif - -/******************************************************************************* - * Code - ******************************************************************************/ -#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) -#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) -__attribute__((section(".boot_hdr.conf"))) -#elif defined(__ICCARM__) -#pragma location = ".boot_hdr.conf" -#endif - -const flexspi_nor_config_t qspiflash_config = { - .memConfig = - { - .tag = FLEXSPI_CFG_BLK_TAG, - .version = FLEXSPI_CFG_BLK_VERSION, - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 3u, - .csSetupTime = 3u, - // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock - .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_100MHz, - .sflashA1Size = 2u * 1024u * 1024u, - .lookupTable = - { - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - }, - }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .blockSize = 256u * 1024u, - .isUniformBlockSize = false, -}; -#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/teensy_40/teensy40_flexspi_nor_config.h b/hw/bsp/teensy_40/teensy40_flexspi_nor_config.h deleted file mode 100644 index 56068ec6a..000000000 --- a/hw/bsp/teensy_40/teensy40_flexspi_nor_config.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright 2018 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__ -#define __TEENSY40_FLEXSPI_NOR_CONFIG__ - -#include -#include -#include "fsl_common.h" - -/*! @name Driver version */ -/*@{*/ -/*! @brief XIP_BOARD driver version 2.0.0. */ -#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) -/*@}*/ - -/* FLEXSPI memory config block related defintions */ -#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian -#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 -#define FLEXSPI_CFG_BLK_SIZE (512) - -/* FLEXSPI Feature related definitions */ -#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 - -/* Lookup table related defintions */ -#define CMD_INDEX_READ 0 -#define CMD_INDEX_READSTATUS 1 -#define CMD_INDEX_WRITEENABLE 2 -#define CMD_INDEX_WRITE 4 - -#define CMD_LUT_SEQ_IDX_READ 0 -#define CMD_LUT_SEQ_IDX_READSTATUS 1 -#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 -#define CMD_LUT_SEQ_IDX_WRITE 9 - -#define CMD_SDR 0x01 -#define CMD_DDR 0x21 -#define RADDR_SDR 0x02 -#define RADDR_DDR 0x22 -#define CADDR_SDR 0x03 -#define CADDR_DDR 0x23 -#define MODE1_SDR 0x04 -#define MODE1_DDR 0x24 -#define MODE2_SDR 0x05 -#define MODE2_DDR 0x25 -#define MODE4_SDR 0x06 -#define MODE4_DDR 0x26 -#define MODE8_SDR 0x07 -#define MODE8_DDR 0x27 -#define WRITE_SDR 0x08 -#define WRITE_DDR 0x28 -#define READ_SDR 0x09 -#define READ_DDR 0x29 -#define LEARN_SDR 0x0A -#define LEARN_DDR 0x2A -#define DATSZ_SDR 0x0B -#define DATSZ_DDR 0x2B -#define DUMMY_SDR 0x0C -#define DUMMY_DDR 0x2C -#define DUMMY_RWDS_SDR 0x0D -#define DUMMY_RWDS_DDR 0x2D -#define JMP_ON_CS 0x1F -#define STOP 0 - -#define FLEXSPI_1PAD 0 -#define FLEXSPI_2PAD 1 -#define FLEXSPI_4PAD 2 -#define FLEXSPI_8PAD 3 - -#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ - (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ - FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - -//!@brief Definitions for FlexSPI Serial Clock Frequency -typedef enum _FlexSpiSerialClockFreq -{ - kFlexSpiSerialClk_30MHz = 1, - kFlexSpiSerialClk_50MHz = 2, - kFlexSpiSerialClk_60MHz = 3, - kFlexSpiSerialClk_75MHz = 4, - kFlexSpiSerialClk_80MHz = 5, - kFlexSpiSerialClk_100MHz = 6, - kFlexSpiSerialClk_120MHz = 7, - kFlexSpiSerialClk_133MHz = 8, - kFlexSpiSerialClk_166MHz = 9, -} flexspi_serial_clk_freq_t; - -//!@brief FlexSPI clock configuration type -enum -{ - kFlexSpiClk_SDR, //!< Clock configure for SDR mode - kFlexSpiClk_DDR, //!< Clock configurat for DDR mode -}; - -//!@brief FlexSPI Read Sample Clock Source definition -typedef enum _FlashReadSampleClkSource -{ - kFlexSPIReadSampleClk_LoopbackInternally = 0, - kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, - kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, - kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, -} flexspi_read_sample_clk_t; - -//!@brief Misc feature bit definitions -enum -{ - kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable - kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable - kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable - kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable - kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable - kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable - kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. -}; - -//!@brief Flash Type Definition -enum -{ - kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR - kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND - kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH - kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND - kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs -}; - -//!@brief Flash Pad Definitions -enum -{ - kSerialFlash_1Pad = 1, - kSerialFlash_2Pads = 2, - kSerialFlash_4Pads = 4, - kSerialFlash_8Pads = 8, -}; - -//!@brief FlexSPI LUT Sequence structure -typedef struct _lut_sequence -{ - uint8_t seqNum; //!< Sequence Number, valid number: 1-16 - uint8_t seqId; //!< Sequence Index, valid number: 0-15 - uint16_t reserved; -} flexspi_lut_seq_t; - -//!@brief Flash Configuration Command Type -enum -{ - kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc - kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command - kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode - kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode - kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode - kDeviceConfigCmdType_Reset, //!< Reset device command -}; - -//!@brief FlexSPI Memory Configuration Block -typedef struct _FlexSPIConfig -{ - uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL - uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix - uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use - uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 - uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 - uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 - uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For - //! Serial NAND, need to refer to datasheet - uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable - uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, - //! Generic configuration, etc. - uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for - //! DPI/QPI/OPI switch or reset command - flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt - //! sequence number, [31:16] Reserved - uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration - uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable - uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe - flexspi_lut_seq_t - configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq - uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use - uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands - uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use - uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more - //! details - uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details - uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal - uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot - //! Chapter for more details - uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot - //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH - uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use - uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 - uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 - uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 - uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 - uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value - uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value - uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value - uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value - uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command - uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands - uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns - uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 - uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - - //! busy flag is 0 when flash device is busy - uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences - flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences - uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use -} flexspi_mem_config_t; - -/* */ -#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 -#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 -#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 -#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 -#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 -#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 -#define NOR_CMD_INDEX_DUMMY 6 //!< 6 -#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 - -#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ - CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ - 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ - CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ - 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ - CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block -#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ - 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block -#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ - 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk - -/* - * Serial NOR configuration block - */ -typedef struct _flexspi_nor_config -{ - flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI - uint32_t pageSize; //!< Page size of Serial NOR - uint32_t sectorSize; //!< Sector size of Serial NOR - uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command - uint8_t isUniformBlockSize; //!< Sector/Block size is the same - uint8_t reserved0[2]; //!< Reserved for future use - uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 - uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command - uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false - uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution - uint32_t blockSize; //!< Block size - uint32_t reserve2[11]; //!< Reserved for future use -} flexspi_nor_config_t; - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef __cplusplus -} -#endif -#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */ -- cgit v1.3.1