From f75a019732c266a5c1eede1c763389210e8bc79d Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Mar 2023 18:03:18 +0700 Subject: bsp lpc17 --- .github/workflows/build_arm.yml | 2 +- hw/bsp/lpc17/boards/lpcxpresso1769/board.mk | 8 + hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld | 184 ++++++++++++++++++ .../lpc17/boards/lpcxpresso1769/lpcxpresso1769.c | 209 +++++++++++++++++++++ hw/bsp/lpc17/boards/mbed1768/board.mk | 9 + hw/bsp/lpc17/boards/mbed1768/lpc1768.ld | 184 ++++++++++++++++++ hw/bsp/lpc17/boards/mbed1768/mbed1768.c | 197 +++++++++++++++++++ hw/bsp/lpc17/family.mk | 40 ++++ hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk | 26 --- hw/bsp/lpcxpresso1769/board.mk | 43 ----- hw/bsp/lpcxpresso1769/lpc1769.ld | 184 ------------------ hw/bsp/lpcxpresso1769/lpcxpresso1769.c | 209 --------------------- hw/bsp/mbed1768/board.mk | 44 ----- hw/bsp/mbed1768/lpc1768.ld | 184 ------------------ hw/bsp/mbed1768/mbed1768.c | 197 ------------------- 15 files changed, 832 insertions(+), 888 deletions(-) create mode 100644 hw/bsp/lpc17/boards/lpcxpresso1769/board.mk create mode 100644 hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld create mode 100644 hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c create mode 100644 hw/bsp/lpc17/boards/mbed1768/board.mk create mode 100644 hw/bsp/lpc17/boards/mbed1768/lpc1768.ld create mode 100644 hw/bsp/lpc17/boards/mbed1768/mbed1768.c create mode 100644 hw/bsp/lpc17/family.mk delete mode 100644 hw/bsp/lpcxpresso1769/board.mk delete mode 100644 hw/bsp/lpcxpresso1769/lpc1769.ld delete mode 100644 hw/bsp/lpcxpresso1769/lpcxpresso1769.c delete mode 100644 hw/bsp/mbed1768/board.mk delete mode 100644 hw/bsp/mbed1768/lpc1768.ld delete mode 100644 hw/bsp/mbed1768/mbed1768.c diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 2b64e5410..a62d587ce 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -35,7 +35,7 @@ jobs: - 'broadcom_32bit' - 'imxrt' - 'kinetis_k32 kinetis_kl' - - 'lpc11 lpc13 lpc15 lpc18' + - 'lpc11 lpc13 lpc15 lpc17 lpc18' - 'lpc51 lpc54 lpc55' - 'mm32 msp432e4' - 'nrf' diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/board.mk b/hw/bsp/lpc17/boards/lpcxpresso1769/board.mk new file mode 100644 index 000000000..e22c4f64b --- /dev/null +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/board.mk @@ -0,0 +1,8 @@ +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/lpc1769.ld + +# For flash-jlink target +JLINK_DEVICE = LPC1769 + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld b/hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld new file mode 100644 index 000000000..095bd3d92 --- /dev/null +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/lpc1769.ld @@ -0,0 +1,184 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1769 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamAHB32 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamAHB32) + *(.data.$RAM2*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamAHB32 AT>MFlash512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlash512 + + /* BSS section for RamAHB32 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamAHB32 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c new file mode 100644 index 000000000..24333ad1a --- /dev/null +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c @@ -0,0 +1,209 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUD_ENABLED + tud_int_handler(0); + #endif + + #if CFG_TUH_ENABLED + tuh_int_handler(0); + #endif +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#define LED_PORT 0 +#define LED_PIN 22 +#define LED_STATE_ON 1 + +// JOYSTICK_DOWN if using LPCXpresso Base Board +#define BUTTON_PORT 0 +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +#define BOARD_UART_PORT LPC_UART3 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 12000000; +const uint32_t RTCOscRateIn = 32768; + +/* Pin muxing configuration */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {0, 0, IOCON_MODE_INACT | IOCON_FUNC2}, /* TXD3 */ + {0, 1, IOCON_MODE_INACT | IOCON_FUNC2}, /* RXD3 */ + {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, /* Led 0 */ + + /* Joystick buttons. */ +// {2, 3, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_UP */ + {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, /* JOYSTICK_DOWN */ +// {2, 4, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_LEFT */ +// {0, 16, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_RIGHT */ +// {0, 17, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_PRESS */ +}; + +static const PINMUX_GRP_T pin_usb_mux[] = +{ + {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ + {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- + {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Soft Connect + + {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR (Host mode) + + // VBUS is not connected on this board, so leave the pin at default setting. + /// Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2); // USB VBUS +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif + + Chip_IOCON_Init(LPC_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); + + Chip_SYSCTL_SetFLASHAccess(FLASHTIM_100MHZ_CPU); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + +#if 0 + //------------- UART -------------// + PINSEL_CFG_Type PinCfg = + { + .Portnum = 0, + .Pinnum = 0, // TXD is P0.0 + .Funcnum = 2, + .OpenDrain = 0, + .Pinmode = 0 + }; + PINSEL_ConfigPin(&PinCfg); + + PinCfg.Portnum = 0; + PinCfg.Pinnum = 1; // RXD is P0.1 + PINSEL_ConfigPin(&PinCfg); + + UART_CFG_Type UARTConfigStruct; + UART_ConfigStructInit(&UARTConfigStruct); + UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; + + UART_Init(BOARD_UART_PORT, &UARTConfigStruct); + UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit +#endif + + //------------- USB -------------// + Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); + Chip_USB_Init(); + + enum { + USBCLK_DEVCIE = 0x12, // AHB + Device + USBCLK_HOST = 0x19, // AHB + Host + OTG +// 0x1B // Host + Device + OTG + AHB + }; + + uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; + + LPC_USB->OTGClkCtrl = clk_en; + while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); + +#if CFG_TUH_ENABLED + // set portfunc to host !!! + LPC_USB->StCtrl = 0x3; // should be 1 +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ +// return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ +// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/lpc17/boards/mbed1768/board.mk b/hw/bsp/lpc17/boards/mbed1768/board.mk new file mode 100644 index 000000000..a982a970b --- /dev/null +++ b/hw/bsp/lpc17/boards/mbed1768/board.mk @@ -0,0 +1,9 @@ +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/lpc1768.ld + +# For flash-jlink target +JLINK_DEVICE = LPC1768 +PYOCD_TARGET = lpc1768 + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/lpc17/boards/mbed1768/lpc1768.ld b/hw/bsp/lpc17/boards/mbed1768/lpc1768.ld new file mode 100644 index 000000000..095bd3d92 --- /dev/null +++ b/hw/bsp/lpc17/boards/mbed1768/lpc1768.ld @@ -0,0 +1,184 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1769 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlash512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlash512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlash512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlash512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamAHB32 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamAHB32) + *(.data.$RAM2*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamAHB32 AT>MFlash512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlash512 + + /* BSS section for RamAHB32 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamAHB32 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} diff --git a/hw/bsp/lpc17/boards/mbed1768/mbed1768.c b/hw/bsp/lpc17/boards/mbed1768/mbed1768.c new file mode 100644 index 000000000..9f3d294d3 --- /dev/null +++ b/hw/bsp/lpc17/boards/mbed1768/mbed1768.c @@ -0,0 +1,197 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "../board.h" + +#define LED_PORT 1 +#define LED_PIN 18 +#define LED_STATE_ON 1 + +// JOYSTICK_DOWN if using LPCXpresso Base Board +#define BUTTON_PORT 0 +#define BUTTON_PIN 15 +#define BUTTON_STATE_ACTIVE 0 + +#define BOARD_UART_PORT LPC_UART3 + +/* System oscillator rate and RTC oscillator rate */ +const uint32_t OscRateIn = 10000000; +const uint32_t RTCOscRateIn = 32768; + +/* Pin muxing configuration */ +static const PINMUX_GRP_T pinmuxing[] = +{ + {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, + {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, +}; + +static const PINMUX_GRP_T pin_usb_mux[] = +{ + {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ + {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- + {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Connect + + {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR + {1, 22, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PWRD + + /* VBUS is not connected on this board, so leave the pin at default setting. */ + /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */ +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif + + Chip_IOCON_Init(LPC_IOCON); + Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); + +#if 0 + //------------- UART -------------// + PINSEL_CFG_Type PinCfg = + { + .Portnum = 0, + .Pinnum = 0, // TXD is P0.0 + .Funcnum = 2, + .OpenDrain = 0, + .Pinmode = 0 + }; + PINSEL_ConfigPin(&PinCfg); + + PinCfg.Portnum = 0; + PinCfg.Pinnum = 1; // RXD is P0.1 + PINSEL_ConfigPin(&PinCfg); + + UART_CFG_Type UARTConfigStruct; + UART_ConfigStructInit(&UARTConfigStruct); + UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; + + UART_Init(BOARD_UART_PORT, &UARTConfigStruct); + UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit +#endif + + //------------- USB -------------// + Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); + Chip_USB_Init(); + + enum { + USBCLK_DEVCIE = 0x12, // AHB + Device + USBCLK_HOST = 0x19, // AHB + Host + OTG +// 0x1B // Host + Device + OTG + AHB + }; + + uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; + + LPC_USB->OTGClkCtrl = clk_en; + while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); + +#if CFG_TUH_ENABLED + // set portfunc to host !!! + LPC_USB->StCtrl = 0x3; // should be 1 +#endif +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUD_ENABLED + tud_int_handler(0); + #endif + + #if CFG_TUH_ENABLED + tuh_int_handler(0); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ +// return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ +// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk new file mode 100644 index 000000000..af01b55a8 --- /dev/null +++ b/hw/bsp/lpc17/family.mk @@ -0,0 +1,40 @@ +DEPS_SUBMODULES += hw/mcu/nxp/lpcopen + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -nostdlib \ + -DCORE_M3 \ + -D__USE_LPCOPEN \ + -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ + -DRTC_EV_SUPPORT=0 + +# lpc_types.h cause following errors +CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual + +# caused by freeRTOS port !! +CFLAGS += -Wno-error=maybe-uninitialized + +MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x + +SRC_C += \ + src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ + $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ + $(MCU_DIR)/src/chip_17xx_40xx.c \ + $(MCU_DIR)/src/clock_17xx_40xx.c \ + $(MCU_DIR)/src/gpio_17xx_40xx.c \ + $(MCU_DIR)/src/iocon_17xx_40xx.c \ + $(MCU_DIR)/src/sysctl_17xx_40xx.c \ + $(MCU_DIR)/src/sysinit_17xx_40xx.c \ + $(MCU_DIR)/src/uart_17xx_40xx.c + +INC += \ + $(TOP)/$(MCU_DIR)/inc + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk index 27b9b371f..5627cb024 100644 --- a/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk +++ b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk @@ -4,32 +4,6 @@ CFLAGS += \ -DCPU_LPC51U68JBD64 \ -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' -SRC_C += \ - src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ - $(MCU_DIR)/system_LPC51U68.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(MCU_DIR)/drivers/fsl_power.c \ - $(MCU_DIR)/drivers/fsl_reset.c \ - $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_usart.c - -INC += \ - $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/flexcomm \ - $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ - $(TOP)/$(SDK_DIR)/drivers/lpc_gpio - -SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S - -LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - JLINK_DEVICE = LPC51U68 PYOCD_TARGET = LPC51U68 diff --git a/hw/bsp/lpcxpresso1769/board.mk b/hw/bsp/lpcxpresso1769/board.mk deleted file mode 100644 index d459c8b7b..000000000 --- a/hw/bsp/lpcxpresso1769/board.mk +++ /dev/null @@ -1,43 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ - -DRTC_EV_SUPPORT=0 - -# lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc1769.ld - -SRC_C += \ - src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ - $(MCU_DIR)/src/chip_17xx_40xx.c \ - $(MCU_DIR)/src/clock_17xx_40xx.c \ - $(MCU_DIR)/src/gpio_17xx_40xx.c \ - $(MCU_DIR)/src/iocon_17xx_40xx.c \ - $(MCU_DIR)/src/sysctl_17xx_40xx.c \ - $(MCU_DIR)/src/sysinit_17xx_40xx.c \ - $(MCU_DIR)/src/uart_17xx_40xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = LPC1769 - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/lpcxpresso1769/lpc1769.ld b/hw/bsp/lpcxpresso1769/lpc1769.ld deleted file mode 100644 index 095bd3d92..000000000 --- a/hw/bsp/lpcxpresso1769/lpc1769.ld +++ /dev/null @@ -1,184 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1769 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamAHB32 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamAHB32) - *(.data.$RAM2*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamAHB32 AT>MFlash512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlash512 - - /* BSS section for RamAHB32 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c deleted file mode 100644 index 24333ad1a..000000000 --- a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - #if CFG_TUD_ENABLED - tud_int_handler(0); - #endif - - #if CFG_TUH_ENABLED - tuh_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -#define LED_PORT 0 -#define LED_PIN 22 -#define LED_STATE_ON 1 - -// JOYSTICK_DOWN if using LPCXpresso Base Board -#define BUTTON_PORT 0 -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -#define BOARD_UART_PORT LPC_UART3 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 12000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing configuration */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {0, 0, IOCON_MODE_INACT | IOCON_FUNC2}, /* TXD3 */ - {0, 1, IOCON_MODE_INACT | IOCON_FUNC2}, /* RXD3 */ - {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, /* Led 0 */ - - /* Joystick buttons. */ -// {2, 3, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_UP */ - {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, /* JOYSTICK_DOWN */ -// {2, 4, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_LEFT */ -// {0, 16, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_RIGHT */ -// {0, 17, IOCON_MODE_INACT | IOCON_FUNC0}, /* JOYSTICK_PRESS */ -}; - -static const PINMUX_GRP_T pin_usb_mux[] = -{ - {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ - {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- - {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Soft Connect - - {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR (Host mode) - - // VBUS is not connected on this board, so leave the pin at default setting. - /// Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2); // USB VBUS -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; -#endif - - Chip_IOCON_Init(LPC_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); - - Chip_SYSCTL_SetFLASHAccess(FLASHTIM_100MHZ_CPU); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - -#if 0 - //------------- UART -------------// - PINSEL_CFG_Type PinCfg = - { - .Portnum = 0, - .Pinnum = 0, // TXD is P0.0 - .Funcnum = 2, - .OpenDrain = 0, - .Pinmode = 0 - }; - PINSEL_ConfigPin(&PinCfg); - - PinCfg.Portnum = 0; - PinCfg.Pinnum = 1; // RXD is P0.1 - PINSEL_ConfigPin(&PinCfg); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit -#endif - - //------------- USB -------------// - Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); - Chip_USB_Init(); - - enum { - USBCLK_DEVCIE = 0x12, // AHB + Device - USBCLK_HOST = 0x19, // AHB + Host + OTG -// 0x1B // Host + Device + OTG + AHB - }; - - uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; - - LPC_USB->OTGClkCtrl = clk_en; - while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); - -#if CFG_TUH_ENABLED - // set portfunc to host !!! - LPC_USB->StCtrl = 0x3; // should be 1 -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ -// return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ -// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/mbed1768/board.mk b/hw/bsp/mbed1768/board.mk deleted file mode 100644 index 6940bbb55..000000000 --- a/hw/bsp/mbed1768/board.mk +++ /dev/null @@ -1,44 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -nostdlib \ - -DCORE_M3 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC175X_6X \ - -DRTC_EV_SUPPORT=0 - -# startup.c and lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc1768.ld - -SRC_C += \ - src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ - $(MCU_DIR)/src/chip_17xx_40xx.c \ - $(MCU_DIR)/src/clock_17xx_40xx.c \ - $(MCU_DIR)/src/gpio_17xx_40xx.c \ - $(MCU_DIR)/src/iocon_17xx_40xx.c \ - $(MCU_DIR)/src/sysctl_17xx_40xx.c \ - $(MCU_DIR)/src/sysinit_17xx_40xx.c \ - $(MCU_DIR)/src/uart_17xx_40xx.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 - -# For flash-jlink target -JLINK_DEVICE = LPC1768 - -# flash using pyocd -flash: $(BUILD)/$(PROJECT).hex - pyocd flash -t lpc1768 $< diff --git a/hw/bsp/mbed1768/lpc1768.ld b/hw/bsp/mbed1768/lpc1768.ld deleted file mode 100644 index 095bd3d92..000000000 --- a/hw/bsp/mbed1768/lpc1768.ld +++ /dev/null @@ -1,184 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * (c) Code Red Technologies Ltd, 2008-2013 - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC1769 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 14, 2019 6:39:29 PM - */ - -MEMORY -{ - /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ -} - - /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlash512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlash512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlash512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlash512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamAHB32 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamAHB32) - *(.data.$RAM2*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamAHB32 AT>MFlash512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlash512 - - /* BSS section for RamAHB32 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/mbed1768/mbed1768.c b/hw/bsp/mbed1768/mbed1768.c deleted file mode 100644 index 9f3d294d3..000000000 --- a/hw/bsp/mbed1768/mbed1768.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -#define LED_PORT 1 -#define LED_PIN 18 -#define LED_STATE_ON 1 - -// JOYSTICK_DOWN if using LPCXpresso Base Board -#define BUTTON_PORT 0 -#define BUTTON_PIN 15 -#define BUTTON_STATE_ACTIVE 0 - -#define BOARD_UART_PORT LPC_UART3 - -/* System oscillator rate and RTC oscillator rate */ -const uint32_t OscRateIn = 10000000; -const uint32_t RTCOscRateIn = 32768; - -/* Pin muxing configuration */ -static const PINMUX_GRP_T pinmuxing[] = -{ - {LED_PORT, LED_PIN, IOCON_MODE_INACT | IOCON_FUNC0}, - {BUTTON_PORT, BUTTON_PIN, IOCON_FUNC0 | IOCON_MODE_PULLUP}, -}; - -static const PINMUX_GRP_T pin_usb_mux[] = -{ - {0, 29, IOCON_MODE_INACT | IOCON_FUNC1}, // D+ - {0, 30, IOCON_MODE_INACT | IOCON_FUNC1}, // D- - {2, 9, IOCON_MODE_INACT | IOCON_FUNC1}, // Connect - - {1, 19, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PPWR - {1, 22, IOCON_MODE_INACT | IOCON_FUNC2}, // USB_PWRD - - /* VBUS is not connected on this board, so leave the pin at default setting. */ - /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */ -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; -#endif - - Chip_IOCON_Init(LPC_IOCON); - Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); - -#if 0 - //------------- UART -------------// - PINSEL_CFG_Type PinCfg = - { - .Portnum = 0, - .Pinnum = 0, // TXD is P0.0 - .Funcnum = 2, - .OpenDrain = 0, - .Pinmode = 0 - }; - PINSEL_ConfigPin(&PinCfg); - - PinCfg.Portnum = 0; - PinCfg.Pinnum = 1; // RXD is P0.1 - PINSEL_ConfigPin(&PinCfg); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit -#endif - - //------------- USB -------------// - Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T)); - Chip_USB_Init(); - - enum { - USBCLK_DEVCIE = 0x12, // AHB + Device - USBCLK_HOST = 0x19, // AHB + Host + OTG -// 0x1B // Host + Device + OTG + AHB - }; - - uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST; - - LPC_USB->OTGClkCtrl = clk_en; - while ( (LPC_USB->OTGClkSt & clk_en) != clk_en ); - -#if CFG_TUH_ENABLED - // set portfunc to host !!! - LPC_USB->StCtrl = 0x3; // should be 1 -#endif -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) -{ - #if CFG_TUD_ENABLED - tud_int_handler(0); - #endif - - #if CFG_TUH_ENABLED - tuh_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ -// return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ -// UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif -- cgit v1.3.1