From d98bc0a64bb7ff468eb0ccede7ef14deb4a90bbf Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 12 Mar 2014 17:18:50 +0700 Subject: move boards to root folder --- boards/microbuilder/board_lpc4357usb.c | 130 +++++++++++++++++++++++ boards/microbuilder/board_lpc4357usb.h | 75 +++++++++++++ boards/microbuilder/board_lpc4357usb_etminit.ini | 31 ++++++ boards/microbuilder/board_rf1ghznode.c | 115 ++++++++++++++++++++ boards/microbuilder/board_rf1ghznode.h | 66 ++++++++++++ 5 files changed, 417 insertions(+) create mode 100644 boards/microbuilder/board_lpc4357usb.c create mode 100644 boards/microbuilder/board_lpc4357usb.h create mode 100644 boards/microbuilder/board_lpc4357usb_etminit.ini create mode 100644 boards/microbuilder/board_rf1ghznode.c create mode 100644 boards/microbuilder/board_rf1ghznode.h (limited to 'boards/microbuilder') diff --git a/boards/microbuilder/board_lpc4357usb.c b/boards/microbuilder/board_lpc4357usb.c new file mode 100644 index 000000000..35d800956 --- /dev/null +++ b/boards/microbuilder/board_lpc4357usb.c @@ -0,0 +1,130 @@ +/**************************************************************************/ +/*! + @file board_lpc4357usb.c + @author hathach (tinyusb.org) + + @section LICENSE + + Software License Agreement (BSD License) + + Copyright (c) 2013, hathach (tinyusb.org) + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. Neither the name of the copyright holders nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY + EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + This file is part of the tinyusb stack. +*/ +/**************************************************************************/ + +#include "../board.h" + +#if BOARD == BOARD_LPC4357USB + +#define BOARD_UART_PORT (LPC_USART0) +#define BOARD_UART_PIN_PORT (0x0F) +#define BOARD_UART_PIN_TX (10) // PF.10 : UART0_TXD +#define BOARD_UART_PIN_RX (11) // PF.11 : UART0_RXD + +#define BOARD_LED0_PORT (0x0C) +#define BOARD_LED0_PIN (2) // PC.2 = User LED +#define BOARD_LED0_FUNCTION (4) // GPIO multiplexed as function 4 on PC.2 +#define BOARD_LED0_GPIO_PORT (6) +#define BOARD_LED0_GPIO_PIN (1) // PC.2 = GPIO 6[1] + +void board_init(void) +{ + CGU_Init(); + + /* Setup the systick time for 1ms ticks */ + SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); + + /* Configure LED0 as GPIO */ + scu_pinmux(BOARD_LED0_PORT, BOARD_LED0_PIN, MD_PDN, BOARD_LED0_FUNCTION); + GPIO_SetDir(BOARD_LED0_GPIO_PORT, (1 << BOARD_LED0_GPIO_PIN), 1); + + /* Configure TRACE pins */ + scu_pinmux(0xF, 4, MD_PDN, 0x2); /* PF_4 = TRACECLK */ + scu_pinmux(0x7, 4, MD_PDN, 0x5); /* P7_4 = TRACEDATA[0] */ + scu_pinmux(0x7, 5, MD_PDN, 0x5); /* P7_5 = TRACEDATA[1] */ + scu_pinmux(0x7, 6, MD_PDN, 0x5); /* P7_6 = TRACEDATA[2] */ + scu_pinmux(0x7, 7, MD_PDN, 0x5); /* P7_7 = TRACEDATA[3] */ + + // USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357 + scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7); // USB0 VBus Power + + // 1.5Kohm pull-up resistor is needed on the USB DP data signal. GPIO28 (base), P9_5 (LPC4357) controls + //scu_pinmux(0x9, 5, MD_PUP|MD_EZI|MD_ZI, FUNC4); // GPIO5[18] + //GPIO_SetDir(5, BIT_(18), 1); // output + //GPIO_ClearValue(5, BIT_(18)); + + /* Init I2C @ 400kHz */ + I2C_Init(LPC_I2C0, 400000); + I2C_Cmd(LPC_I2C0, ENABLE); + +#if CFG_UART_ENABLE + //------------- UART init -------------// + scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN , FUNC1); + scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1); + + UART_CFG_Type UARTConfigStruct; + UART_ConfigStructInit(&UARTConfigStruct); + UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE; + UARTConfigStruct.Clock_Speed = 0; + + UART_Init(BOARD_UART_PORT, &UARTConfigStruct); + UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit +#endif +} + +//--------------------------------------------------------------------+ +// LEDS +//--------------------------------------------------------------------+ +void board_leds(uint32_t on_mask, uint32_t off_mask) +{ + if (on_mask & 0x01) + { + LPC_GPIO_PORT->SET[BOARD_LED0_GPIO_PORT] = (1 << BOARD_LED0_GPIO_PIN); + } + + if (off_mask & 0x01) + { + LPC_GPIO_PORT->CLR[BOARD_LED0_GPIO_PORT] = (1 << BOARD_LED0_GPIO_PIN); + } +} + +//--------------------------------------------------------------------+ +// UART +//--------------------------------------------------------------------+ +#if CFG_UART_ENABLE +uint32_t board_uart_send(uint8_t *buffer, uint32_t length) +{ + return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING); +} + +uint32_t board_uart_recv(uint8_t *buffer, uint32_t length) +{ + return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING); +} +#endif + +#endif diff --git a/boards/microbuilder/board_lpc4357usb.h b/boards/microbuilder/board_lpc4357usb.h new file mode 100644 index 000000000..96d535c7c --- /dev/null +++ b/boards/microbuilder/board_lpc4357usb.h @@ -0,0 +1,75 @@ +/**************************************************************************/ +/*! + @file board_lpc4357usb.h + @author hathach (tinyusb.org) + + @section LICENSE + + Software License Agreement (BSD License) + + Copyright (c) 2013, hathach (tinyusb.org) + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. Neither the name of the copyright holders nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY + EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + This file is part of the tinyusb stack. +*/ +/**************************************************************************/ + +/** \file + * \brief TBD + * + * \note TBD + */ + +/** \ingroup TBD + * \defgroup TBD + * \brief TBD + * + * @{ + */ + +#ifndef _TUSB_BOARD_LPC4357USB_H_ +#define _TUSB_BOARD_LPC4357USB_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#include "LPC43xx.h" +#include "lpc43xx_scu.h" +#include "lpc43xx_cgu.h" +#include "lpc43xx_gpio.h" +#include "lpc43xx_uart.h" +#include "lpc43xx_i2c.h" + +#define CFG_PRINTF_TARGET PRINTF_TARGET_SWO +//#define CFG_PRINTF_TARGET PRINTF_TARGET_UART + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_BOARD_LPC4357USB_H_ */ + +/** @} */ diff --git a/boards/microbuilder/board_lpc4357usb_etminit.ini b/boards/microbuilder/board_lpc4357usb_etminit.ini new file mode 100644 index 000000000..67aed412e --- /dev/null +++ b/boards/microbuilder/board_lpc4357usb_etminit.ini @@ -0,0 +1,31 @@ +/*------------------------------------------------------------------- +** Define the function to enable the trace port +**-----------------------------------------------------------------*/ +FUNC void EnableTPIU(void) { + + /* Configure TRACE pins for MCB4357 */ + //_WDWORD(0x40086790, 0x000000B2); // LPC_SCU->SFSPF_4 = 2; + //_WDWORD(0x40086794, 0x000000B3); // LPC_SCU->SFSPF_5 = 3; + //_WDWORD(0x40086798, 0x000000B3); // LPC_SCU->SFSPF_6 = 3; + //_WDWORD(0x4008679C, 0x000000B3); // LPC_SCU->SFSPF_7 = 3; + //_WDWORD(0x400867A0, 0x000000B3); // LPC_SCU->SFSPF_8 = 3; + + /* Configure TRACE pins for LPC4357USB */ + _WDWORD(0x40086790, 0x000000B2); // LPC_SCU->SFSPF_4 = 2 - TRACECLK + _WDWORD(0x40086390, 0x000000B5); // LPC_SCU->SFSP7_4 = 5 - TRACEDATA[0] + _WDWORD(0x40086394, 0x000000B5); // LPC_SCU->SFSP7_5 = 5 - TRACEDATA[1] + _WDWORD(0x40086398, 0x000000B5); // LPC_SCU->SFSP7_6 = 5 - TRACEDATA[2] + _WDWORD(0x4008639C, 0x000000B5); // LPC_SCU->SFSP7_7 = 5 - TRACEDATA[3] +} + +/*------------------------------------------------------------------- +** Invoke the function at debugger startup +**-----------------------------------------------------------------*/ +EnableTPIU(); + +/*------------------------------------------------------------------- +** Execute upon software RESET +**-----------------------------------------------------------------*/ +FUNC void OnResetExec(void) { + EnableTPIU(); +} diff --git a/boards/microbuilder/board_rf1ghznode.c b/boards/microbuilder/board_rf1ghznode.c new file mode 100644 index 000000000..9560472cb --- /dev/null +++ b/boards/microbuilder/board_rf1ghznode.c @@ -0,0 +1,115 @@ +/**************************************************************************/ +/*! + @file board_rf1ghznode.c + @author hathach (tinyusb.org) + + @section LICENSE + + Software License Agreement (BSD License) + + Copyright (c) 2013, hathach (tinyusb.org) + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. Neither the name of the copyright holders nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY + EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + This file is part of the tinyusb stack. +*/ +/**************************************************************************/ + +#include "../board.h" + +#if BOARD == BOARD_RF1GHZNODE + +#define LED_PORT (1) +#define LED_PIN (31) +#define LED_ON (0) +#define LED_OFF (1) + +const static struct { + uint8_t port; + uint8_t pin; +} buttons[] = { { 0, 1 } }; + +enum { + BOARD_BUTTON_COUNT = sizeof(buttons) / sizeof(buttons[0]) +}; + +void board_init(void) +{ + SystemInit(); + +#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c + SysTick_Config(SystemCoreClock / CFG_TICKS_PER_SECOND); // 1 msec tick timer +#endif + + GPIOInit(); + + //------------- LED -------------// + GPIOSetDir(LED_PORT, LED_PIN, 1); + board_leds(0x01, 0); // turn off the led first + + //------------- BUTTON -------------// + for(uint8_t i=0; i