From 5cfe2930012d1dbec85e0923e0eda2d9aec867e6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Oct 2021 17:31:57 +0700 Subject: update changelog and increase version for 0.12.0 --- docs/reference/getting_started.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference/getting_started.rst') diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 044792993..875372c81 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -122,7 +122,7 @@ Logger By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: -* `LOGGER=rtt`: use [Segger RTT protocol](https://www.segger.com/products/debug-probes/j-link/technology/about-real-time-transfer/) +* `LOGGER=rtt`: use `Segger RTT protocol `_ * Cons: requires jlink as the debugger. * Pros: work with most if not all MCUs -- cgit v1.3.1