From e4ff88f3640458f820838efd047a3831333446d8 Mon Sep 17 00:00:00 2001
From: c1570 <c1570@users.noreply.github.com>
Date: Mon, 22 Sep 2025 23:31:13 +0200
Subject: WIP improved docs (feat. LLM)

---
 docs/reference/glossary.rst | 89 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 docs/reference/glossary.rst

(limited to 'docs/reference/glossary.rst')

diff --git a/docs/reference/glossary.rst b/docs/reference/glossary.rst
new file mode 100644
index 000000000..e6e92738f
--- /dev/null
+++ b/docs/reference/glossary.rst
@@ -0,0 +1,89 @@
+********
+Glossary
+********
+
+.. glossary::
+
+   Bulk Transfer
+      USB transfer type used for large amounts of data that doesn't require guaranteed timing. Used by mass storage devices and CDC class.
+
+   CDC
+      Communications Device Class. USB class for devices that communicate serial data, creating virtual serial ports.
+
+   Control Transfer
+      USB transfer type used for device configuration and control. All USB devices must support control transfers on endpoint 0.
+
+   DCD
+      Device Controller Driver. The hardware abstraction layer for USB device controllers in TinyUSB.
+
+   Descriptor
+      Data structures that describe USB device capabilities, configuration, and interfaces to the host.
+
+   Device Class
+      USB specification defining how devices of a particular type (e.g., storage, audio, HID) communicate with hosts.
+
+   DFU
+      Device Firmware Update. USB class that allows firmware updates over USB.
+
+   Endpoint
+      Communication channel between host and device. Each endpoint has a direction (IN/OUT) and transfer type.
+
+   Enumeration
+      Process where USB host discovers and configures a newly connected device.
+
+   HCD
+      Host Controller Driver. The hardware abstraction layer for USB host controllers in TinyUSB.
+
+   HID
+      Human Interface Device. USB class for input devices like keyboards, mice, and game controllers.
+
+   High Speed
+      USB 2.0 speed mode operating at 480 Mbps.
+
+   Full Speed
+      USB speed mode operating at 12 Mbps, supported by USB 1.1 and 2.0.
+
+   Low Speed
+      USB speed mode operating at 1.5 Mbps, typically used by simple input devices.
+
+   Interrupt Transfer
+      USB transfer type for small, time-sensitive data with guaranteed maximum latency.
+
+   Isochronous Transfer
+      USB transfer type for time-critical data like audio/video with guaranteed bandwidth but no error correction.
+
+   MSC
+      Mass Storage Class. USB class for storage devices like USB drives.
+
+   OSAL
+      Operating System Abstraction Layer. TinyUSB component that abstracts RTOS differences.
+
+   OTG
+      On-The-Go. USB specification allowing devices to act as both host and device.
+
+   Pipe
+      Host-side communication channel to a device endpoint.
+
+   Root Hub
+      The USB hub built into the host controller, where devices connect directly.
+
+   Stall
+      USB protocol mechanism where an endpoint responds with a STALL handshake to indicate an error condition or unsupported request. Used for error handling, not flow control.
+
+   Super Speed
+      USB 3.0 speed mode operating at 5 Gbps. Not supported by TinyUSB.
+
+   UAC
+      USB Audio Class. USB class for audio devices.
+
+   UVC
+      USB Video Class. USB class for video devices like cameras.
+
+   VID
+      Vendor Identifier. 16-bit number assigned by USB-IF to identify device manufacturers.
+
+   PID
+      Product Identifier. 16-bit number assigned by vendor to identify specific products.
+
+   USB-IF
+      USB Implementers Forum. Organization that maintains USB specifications and assigns VIDs.
\ No newline at end of file
-- 
cgit v1.3.1