From 20fdaeef6ca8853002087927e460c0b6339049cd Mon Sep 17 00:00:00 2001 From: alt-0191 <2223147307@qq.com> Date: Thu, 26 Feb 2026 21:10:04 +0800 Subject: ch58x: fix MCU macro naming and add get_deps/boards entries --- docs/reference/boards.rst | 1 + 1 file changed, 1 insertion(+) (limited to 'docs/reference') diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index ec91b343e..517c479fe 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -368,4 +368,5 @@ ch32v203g_r0_1v0 CH32V203G-R0-1v0 ch32v20x https://github.com/openwch/ch32v20 nanoch32v203 nanoCH32V203 ch32v20x https://github.com/wuxx/nanoCH32V203 ch32v307v_r1_1v0 CH32V307V-R1-1v0 ch32v30x https://github.com/openwch/ch32v307/tree/main/SCHPCB/CH32V307V-R1-1v0 nanoch32v305 nanoCH32V305 ch32v30x https://github.com/wuxx/nanoCH32V305 +yd-ch582m yd-ch582m ch58x http://vcc-gnd.com ================ ================ ======== ===================================================================== ====== -- cgit v1.3.1 From 5ea1979e290ed80430a5b65b56534373ecbdd56f Mon Sep 17 00:00:00 2001 From: HiFiPHile Date: Sun, 10 May 2026 01:47:21 +0200 Subject: add stm32c5 support Signed-off-by: HiFiPHile --- .github/workflows/ci_set_matrix.py | 1 + README.rst | 2 +- docs/reference/boards.rst | 1 + docs/reference/dependencies.rst | 4 +- .../device/cdc_msc_throughput/CMakePresets.json | 6 + examples/device/printer_to_cdc/CMakePresets.json | 6 + examples/dual/dynamic_switch/only.txt | 1 + examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/cdc_msc_hid_freertos/only.txt | 1 + examples/host/device_info/only.txt | 1 + examples/host/midi_rx/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + hw/bsp/BoardPresets.json | 22 + hw/bsp/stm32c5/FreeRTOSConfig/FreeRTOSConfig.h | 165 +++++ hw/bsp/stm32c5/boards/stm32c542nucleo/board.cmake | 13 + hw/bsp/stm32c5/boards/stm32c542nucleo/board.h | 83 +++ hw/bsp/stm32c5/boards/stm32c542nucleo/board.mk | 13 + hw/bsp/stm32c5/family.c | 237 +++++++ hw/bsp/stm32c5/family.cmake | 111 ++++ hw/bsp/stm32c5/family.mk | 52 ++ hw/bsp/stm32c5/stm32c5xx_hal_conf.h | 684 +++++++++++++++++++++ src/common/tusb_mcu.h | 6 + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 1 + src/portable/st/stm32_fsdev/fsdev_stm32.h | 8 +- src/tusb_option.h | 1 + tools/get_deps.py | 8 +- 27 files changed, 1427 insertions(+), 4 deletions(-) create mode 100644 examples/device/cdc_msc_throughput/CMakePresets.json create mode 100644 examples/device/printer_to_cdc/CMakePresets.json create mode 100644 hw/bsp/stm32c5/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/stm32c5/boards/stm32c542nucleo/board.cmake create mode 100644 hw/bsp/stm32c5/boards/stm32c542nucleo/board.h create mode 100644 hw/bsp/stm32c5/boards/stm32c542nucleo/board.mk create mode 100644 hw/bsp/stm32c5/family.c create mode 100644 hw/bsp/stm32c5/family.cmake create mode 100644 hw/bsp/stm32c5/family.mk create mode 100644 hw/bsp/stm32c5/stm32c5xx_hal_conf.h (limited to 'docs/reference') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 1d35f15dd..f4d25fd37 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -68,6 +68,7 @@ family_list = { "samd5x_e5x": ["arm-gcc", "arm-clang"], "samg": ["arm-gcc", "arm-clang"], "stm32c0": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32c5": ["arm-gcc", "arm-clang", "arm-iar"], "stm32f0": ["arm-gcc", "arm-clang", "arm-iar"], "stm32f1": ["arm-gcc", "arm-clang", "arm-iar"], "stm32f2": ["arm-gcc", "arm-clang", "arm-iar"], diff --git a/README.rst b/README.rst index 04998abaa..1c56a6ba0 100644 --- a/README.rst +++ b/README.rst @@ -238,7 +238,7 @@ Supported CPUs | +----+------------------------+--------+------+-----------+------------------------+--------------------+ | | F2, F4, F7, H7, H7RS | ✔ | ✔ | ✔ | dwc2 | | | +-----------------------------+--------+------+-----------+------------------------+--------------------+ -| | C0, G0, H5, U3 | ✔ | ✔ | ✖ | stm32_fsdev | 2KB USB RAM | +| | C0, C5, G0, H5, U3 | ✔ | ✔ | ✖ | stm32_fsdev | 2KB USB RAM | | +-----------------------------+--------+------+-----------+------------------------+--------------------+ | | G4 | ✔ | ✖ | ✖ | stm32_fsdev | 1KB USB RAM | | +----+------------------------+--------+------+-----------+------------------------+--------------------+ diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index e61c4f98b..b0e8bffaa 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -266,6 +266,7 @@ STMicroelectronics Board Name Family URL Note =================== ================================= ========= ================================================================= ====== stm32c071nucleo STM32C071 Nucleo stm32c0 https://www.st.com/en/evaluation-tools/nucleo-c071rb.html +stm32c542nucleo STM32C542 Nucleo stm32c5 https://www.st.com/en/evaluation-tools/nucleo-c542rc.html stm32f070rbnucleo STM32 F070 Nucleo stm32f0 https://www.st.com/en/evaluation-tools/nucleo-f070rb.html stm32f072disco STM32 F072 Discovery stm32f0 https://www.st.com/en/evaluation-tools/32f072bdiscovery.html stm32f072eval STM32 F072 Eval stm32f0 https://www.st.com/en/evaluation-tools/stm32072b-eval.html diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index c5b755577..d281e912a 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -59,6 +59,7 @@ hw/mcu/st/cmsis_device_l5 https://github.com/STMicroelectronics/ hw/mcu/st/cmsis_device_n6 https://github.com/STMicroelectronics/cmsis-device-n6.git 7bcdc944fbf7cf5928d3c1d14054ca13261d33ec stm32n6 hw/mcu/st/cmsis_device_u5 https://github.com/STMicroelectronics/cmsis_device_u5.git 6e67187dec98035893692ab2923914cb5f4e0117 stm32u5 hw/mcu/st/cmsis_device_wb https://github.com/STMicroelectronics/cmsis_device_wb.git cda2cb9fc4a5232ab18efece0bb06b0b60910083 stm32wb +hw/mcu/st/stm32c5xx-dfp https://github.com/STMicroelectronics/stm32c5xx-dfp.git 6d0940882511d9430f83af9bd3da6bcb77f79239 stm32c5 hw/mcu/st/stm32-mfxstm32l152 https://github.com/STMicroelectronics/stm32-mfxstm32l152.git 7f4389efee9c6a655b55e5df3fceef5586b35f9b stm32h7 hw/mcu/st/stm32-tcpp0203 https://github.com/STMicroelectronics/stm32-tcpp0203.git 9918655bff176ac3046ccf378b5c7bbbc6a38d15 stm32h5 stm32h7rs stm32n6 hw/mcu/st/stm32c0xx_hal_driver https://github.com/STMicroelectronics/stm32c0xx_hal_driver.git c283b143bef6bdaacf64240ee6f15eb61dad6125 stm32c0 @@ -82,13 +83,14 @@ hw/mcu/st/stm32u0xx_hal_driver https://github.com/STMicroelectronics/ hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 2c5e2568fbdb1900a13ca3b2901fdd302cac3444 stm32u5 hw/mcu/st/stm32wbaxx_hal_driver https://github.com/STMicroelectronics/stm32wbaxx_hal_driver.git 9442fbb71f855ff2e64fbf662b7726beba511a24 stm32wba hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git d60dd46996876506f1d2e9abd6b1cc110c8004cd stm32wb +hw/mcu/st/stm32c5xx-drivers https://github.com/STMicroelectronics/stm32c5xx-drivers.git 79b901285a7efeaf87c4c25db81d24cb5d8c9465 stm32c5 hw/mcu/ti https://github.com/hathach/ti_driver.git 083944907e7d08fcb1f614b47598ce45935b8da1 msp430 msp432e4 tm4c hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b ch32f20x hw/mcu/wch/ch32v103 https://github.com/openwch/ch32v103.git 7578cae0b21f86dd053a1f781b2fc6ab99d0ec17 ch32v10x hw/mcu/wch/ch32v20x https://github.com/openwch/ch32v20x.git c4c38f507e258a4e69b059ccc2dc27dde33cea1b ch32v20x hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 184f21b852cb95eed58e86e901837bc9fff68775 ch32v30x lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c kinetis_k kinetis_kl lpc54 rw61x mm32 msp432e4 nrf samd2x_l2x lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32u0 stm32u5 stm32wb stm32wba sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x samg tm4c -lib/CMSIS_6 https://github.com/ARM-software/CMSIS_6.git 6f0a58d01aa9bd2feba212097f9afe7acd991d52 imxrt kinetis_k32l ra stm32n6 lpc51 lpc55 mcx +lib/CMSIS_6 https://github.com/ARM-software/CMSIS_6.git 6f0a58d01aa9bd2feba212097f9afe7acd991d52 imxrt kinetis_k32l ra stm32n6 lpc51 lpc55 mcx stm32c5 lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git cc0e0707c0c748713485b870bb980852b210877f all lib/lwip https://github.com/lwip-tcpip/lwip.git 159e31b689577dbf69cf0683bbaffbd71fa5ee10 all lib/sct_neopixel https://github.com/gsteiert/sct_neopixel.git e73e04ca63495672d955f9268e003cffe168fcd8 lpc55 diff --git a/examples/device/cdc_msc_throughput/CMakePresets.json b/examples/device/cdc_msc_throughput/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_msc_throughput/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/printer_to_cdc/CMakePresets.json b/examples/device/printer_to_cdc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/printer_to_cdc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/dynamic_switch/only.txt b/examples/dual/dynamic_switch/only.txt index 70be49b28..e1038f9d4 100644 --- a/examples/dual/dynamic_switch/only.txt +++ b/examples/dual/dynamic_switch/only.txt @@ -2,6 +2,7 @@ family:espressif mcu:LPC43XX mcu:MIMXRT1XXX mcu:STM32C0 +mcu:STM32C5 mcu:STM32G0 mcu:STM32H5 mcu:STM32F2 diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 1ddfc2b5c..a2ff93be5 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -20,6 +20,7 @@ mcu:RP2040 mcu:RW61X mcu:RX65X mcu:STM32C0 +mcu:STM32C5 mcu:STM32F4 mcu:STM32F7 mcu:STM32G0 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 1ddfc2b5c..a2ff93be5 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -20,6 +20,7 @@ mcu:RP2040 mcu:RW61X mcu:RX65X mcu:STM32C0 +mcu:STM32C5 mcu:STM32F4 mcu:STM32F7 mcu:STM32G0 diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 753fa7cd3..4ab8a906e 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -16,6 +16,7 @@ mcu:MSP432E4 mcu:RW61X mcu:RX65X mcu:STM32C0 +mcu:STM32C5 mcu:STM32F4 mcu:STM32F7 mcu:STM32G0 diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index 742935dcf..4c2cb0f35 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -21,6 +21,7 @@ mcu:RP2040 mcu:RW61X mcu:RX65X mcu:STM32C0 +mcu:STM32C5 mcu:STM32F4 mcu:STM32F7 mcu:STM32G0 diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index c71aacd87..65ef8fac9 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -23,6 +23,7 @@ mcu:RP2040 mcu:RW61X mcu:RX65X mcu:STM32C0 +mcu:STM32C5 mcu:STM32F4 mcu:STM32F7 mcu:STM32G0 diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 1ddfc2b5c..a2ff93be5 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -20,6 +20,7 @@ mcu:RP2040 mcu:RW61X mcu:RX65X mcu:STM32C0 +mcu:STM32C5 mcu:STM32F4 mcu:STM32F7 mcu:STM32G0 diff --git a/hw/bsp/BoardPresets.json b/hw/bsp/BoardPresets.json index 86609d075..1ff29f99d 100644 --- a/hw/bsp/BoardPresets.json +++ b/hw/bsp/BoardPresets.json @@ -626,6 +626,10 @@ "name": "stm32c071nucleo", "inherits": "default" }, + { + "name": "stm32c542nucleo", + "inherits": "default" + }, { "name": "stm32f070rbnucleo", "inherits": "default" @@ -1762,6 +1766,11 @@ "description": "Build preset for the stm32c071nucleo board", "configurePreset": "stm32c071nucleo" }, + { + "name": "stm32c542nucleo", + "description": "Build preset for the stm32c542nucleo board", + "configurePreset": "stm32c542nucleo" + }, { "name": "stm32f070rbnucleo", "description": "Build preset for the stm32f070rbnucleo board", @@ -4227,6 +4236,19 @@ } ] }, + { + "name": "stm32c542nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32c542nucleo" + }, + { + "type": "build", + "name": "stm32c542nucleo" + } + ] + }, { "name": "stm32f070rbnucleo", "steps": [ diff --git a/hw/bsp/stm32c5/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32c5/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..732d9a5cf --- /dev/null +++ b/hw/bsp/stm32c5/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,165 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "stm32c5xx.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 200 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) || \ + defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 4 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<instance)) +#endif + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_DRD_FS_IRQHandler(void) { + tusb_int_handler(0, true); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +#ifdef UART_ID +static hal_uart_handle_t hUSART; +#endif + +void board_init(void) { + HAL_Init(); + board_clock_init(); + + // Enable peripheral clocks. + HAL_RCC_GPIOA_EnableClock(); + HAL_RCC_GPIOB_EnableClock(); + HAL_RCC_GPIOC_EnableClock(); + HAL_RCC_GPIOD_EnableClock(); + HAL_RCC_USB_EnableClock(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // Explicitly disable systick to prevent its ISR from running before scheduler start + SysTick->CTRL &= ~1U; + + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_DRD_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + // LED + { + hal_gpio_config_t gpio_config; + gpio_config.mode = HAL_GPIO_MODE_OUTPUT; + gpio_config.speed = HAL_GPIO_SPEED_FREQ_LOW; + gpio_config.pull = HAL_GPIO_PULL_NO; + gpio_config.output_type = HAL_GPIO_OUTPUT_PUSHPULL; + gpio_config.init_state = HAL_GPIO_PIN_RESET; + + HAL_GPIO_Init(LED_PORT, LED_PIN, &gpio_config); + } + + // Button + { + hal_gpio_config_t gpio_config; + gpio_config.mode = HAL_GPIO_MODE_INPUT; + gpio_config.speed = HAL_GPIO_SPEED_FREQ_LOW; + gpio_config.pull = BUTTON_STATE_ACTIVE ? HAL_GPIO_PULL_DOWN : HAL_GPIO_PULL_UP; + HAL_GPIO_Init(BUTTON_PORT, BUTTON_PIN, &gpio_config); + } + +#ifdef UART_ID + UARTn_CLK_ENABLE(); + // UART + { + hal_gpio_config_t gpio_config; + gpio_config.mode = HAL_GPIO_MODE_ALTERNATE; + gpio_config.output_type = HAL_GPIO_OUTPUT_PUSHPULL; + gpio_config.pull = HAL_GPIO_PULL_NO; + gpio_config.speed = HAL_GPIO_SPEED_FREQ_LOW; + gpio_config.alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, UART_TX_PIN | UART_RX_PIN, &gpio_config); + } + + hal_uart_config_t uart_config; + HAL_UART_Init(&hUSART, UARTn); + uart_config.baud_rate = 115200; + uart_config.clock_prescaler = HAL_UART_PRESCALER_DIV1; + uart_config.word_length = HAL_UART_WORD_LENGTH_8_BIT; + uart_config.stop_bits = HAL_UART_STOP_BIT_1; + uart_config.parity = HAL_UART_PARITY_NONE; + uart_config.direction = HAL_UART_DIRECTION_TX_RX; + uart_config.hw_flow_ctl = HAL_UART_HW_CONTROL_NONE; + uart_config.oversampling = HAL_UART_OVERSAMPLING_16; + uart_config.one_bit_sampling = HAL_UART_ONE_BIT_SAMPLE_DISABLE; + + HAL_UART_SetConfig(&hUSART, &uart_config); + + /* Fifo configuration */ + HAL_UART_SetTxFifoThreshold(&hUSART, HAL_UART_FIFO_THRESHOLD_1_8); + HAL_UART_SetRxFifoThreshold(&hUSART, HAL_UART_FIFO_THRESHOLD_1_8); + HAL_UART_EnableFifoMode(&hUSART); + + LL_USART_Enable(UART_GET_INSTANCE(&hUSART)); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + hal_gpio_pin_state_t pin_state = state ? HAL_GPIO_PIN_SET : HAL_GPIO_PIN_RESET; + HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +size_t board_get_unique_id(uint8_t id[], size_t max_len) { + (void) max_len; + volatile uint32_t * stm32_uuid = (volatile uint32_t *) UID_BASE; + uint32_t* id32 = (uint32_t*) (uintptr_t) id; + uint8_t const len = 12; + + id32[0] = stm32_uuid[0]; + id32[1] = stm32_uuid[1]; + id32[2] = stm32_uuid[2]; + + return len; +} + +int board_uart_read(uint8_t *buf, int len) { +#ifdef UART_ID + int count = 0; + while (count < len) { + if (LL_USART_IsActiveFlag_RXNE_RXFNE(UART_GET_INSTANCE(&hUSART))) { + buf[count] = (uint8_t) UART_GET_INSTANCE(&hUSART)->RDR; + count++; + } else { + break; + } + } + return count; +#else + (void) buf; (void) len; + return -1; +#endif +} + +int board_uart_write(void const *buf, int len) { +#ifdef UART_ID + const uint8_t *p = (const uint8_t *) buf; + int count = 0; + while (count < len) { + if (LL_USART_IsActiveFlag_TXE_TXFNF(UART_GET_INSTANCE(&hUSART))) { + UART_GET_INSTANCE(&hUSART)->TDR = p[count]; + count++; + } else { + break; + } + } + return count; +#else + (void) buf; (void) len; + return 0; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; + HAL_IncTick(); +} + +uint32_t tusb_time_millis_api(void) { + return system_ticks; +} +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +#ifndef __ICCARM__ +// Implement _start() since we use linker flag '-nostartfiles'. +extern int main(void); +TU_ATTR_UNUSED void _start(void) { + // called by startup code + main(); + while (1) {} +} +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { + +} diff --git a/hw/bsp/stm32c5/family.cmake b/hw/bsp/stm32c5/family.cmake new file mode 100644 index 000000000..5b63b1ce4 --- /dev/null +++ b/hw/bsp/stm32c5/family.cmake @@ -0,0 +1,111 @@ +include_guard() + +set(ST_FAMILY c5) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx-drivers) +set(ST_CMSIS ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx-dfp) +set(CMSIS_6 ${TOP}/lib/CMSIS_6) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32C5 CACHE INTERNAL "") +set(OPENOCD_OPTION "-f interface/stlink.cfg -f target/stm32c5x.cfg") + +#------------------------------------ +# Startup & Linker script +#------------------------------------ +set(STARTUP_FILE ${ST_CMSIS}/Source/startup_${MCU_VARIANT}.c) +set(LD_FILE_Clang ${LD_FILE_GNU}) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_DRIVER}/hal/${ST_PREFIX}_hal.c + ${ST_DRIVER}/hal/${ST_PREFIX}_hal_cortex.c + ${ST_DRIVER}/hal/${ST_PREFIX}_hal_flash_itf.c + ${ST_DRIVER}/hal/${ST_PREFIX}_hal_pwr.c + ${ST_DRIVER}/hal/${ST_PREFIX}_hal_rcc.c + ${ST_DRIVER}/hal/${ST_PREFIX}_hal_gpio.c + ${ST_DRIVER}/hal/${ST_PREFIX}_hal_uart.c + ${ST_DRIVER}/hal/${ST_PREFIX}_hal_dma.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_6}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_DRIVER}/hal + ${ST_DRIVER}/ll + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_compile_options(${BOARD_TARGET} PUBLIC -Wno-redundant-decls) + endif () + + if(CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_compile_definitions(${BOARD_TARGET} PUBLIC + __STACK_LIMIT=__StackLimit + __INITIAL_SP=__StackTop + ) + endif () + + update_board(${BOARD_TARGET}) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32C5) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c + ${STARTUP_FILE} + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes") + endif () + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) + family_flash_stlink(${TARGET}) + #family_flash_openocd(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32c5/family.mk b/hw/bsp/stm32c5/family.mk new file mode 100644 index 000000000..165ad4ad5 --- /dev/null +++ b/hw/bsp/stm32c5/family.mk @@ -0,0 +1,52 @@ +ST_FAMILY = c5 +ST_CMSIS = hw/mcu/st/stm32$(ST_FAMILY)xx-dfp +ST_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx-drivers + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m33 + +# -------------- +# Compiler Flags +# -------------- +CFLAGS += \ + -DCFG_TUSB_MCU=OPT_MCU_STM32C5 \ + +# GCC Flags +CFLAGS += \ + -flto \ + +# suppress warnings caused by vendor mcu driver +CFLAGS += -Wno-error=cast-align -Wno-error=unused-parameter -Wno-error=redundant-decls + +LDFLAGS += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs + +# ----------------- +# Sources & Include +# ----------------- + +SRC_C += \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_CMSIS)/Source/startup_$(MCU_VARIANT).c \ + $(ST_DRIVER)/hal/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_DRIVER)/hal/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_DRIVER)/hal/stm32$(ST_FAMILY)xx_hal_flash_itf.c \ + $(ST_DRIVER)/hal/stm32$(ST_FAMILY)xx_hal_pwr.c \ + $(ST_DRIVER)/hal/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_DRIVER)/hal/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_DRIVER)/hal/stm32$(ST_FAMILY)xx_hal_uart.c \ + $(ST_DRIVER)/hal/stm32$(ST_FAMILY)xx_hal_dma.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_6/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_DRIVER)/hal \ + $(TOP)/$(ST_DRIVER)/ll + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32c5/stm32c5xx_hal_conf.h b/hw/bsp/stm32c5/stm32c5xx_hal_conf.h new file mode 100644 index 000000000..0833fa3dd --- /dev/null +++ b/hw/bsp/stm32c5/stm32c5xx_hal_conf.h @@ -0,0 +1,684 @@ +/** + ****************************************************************************** + * @file stm32c5xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the mx_stm32c5xx_hal_drivers_license.md file + * in the same directory as the generated code. + * If no mx_stm32c5xx_hal_drivers_license.md file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32C5XX_HAL_CONF_H +#define STM32C5XX_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_Conf_How_To_Use HAL Conf How to Use + * @{ + - The STM32 HAL configuration file, stm32tnxx_hal_conf.h, is designed to customize the behaviour of the HAL modules. + - The users can utilize the provided file as-is, where all HAL modules are enabled with their default settings. + - Alternatively, users have the flexibility to customize the file based on their application's requirements. + - For example, they can enable only the necessary HAL modules or modify the predefined settings to achieve + the desired functionality. + */ + +/** + * @} + */ + +/** @defgroup HAL_Conf_Exported_Constants HAL Conf Constants + * @{ + */ + +/** @defgroup HAL_System_Configuration HAL System Configuration + * @{ + */ + +/* ########################### System Configuration ############################# */ +/** + * @brief This is the HAL system configuration section + */ +#define USE_HAL_TICK_INT_PRIORITY 15U /*!< tick interrupt priority */ +#define USE_HAL_FLASH_PREFETCH 1U /*!< Enable FLASH prefetch */ +/** + * @} + */ + +/** @defgroup HAL_MUTEX_Usage_Activation HAL MUTEX Usage Activation + * @{ + */ +/* ########################## HAL MUTEX usage activation ####################### */ +/** + * @brief Used by the HAL PPP Acquire/Release APIs when the define USE_HAL_MUTEX is set to 1 + */ +#define USE_HAL_MUTEX 0U +/** + * @} + */ + +/** @defgroup HAL_API_Parameters_Check HAL API Parameters Check + * @{ + */ +/* ########################## HAL API parameters check ##################### */ +/** + * @brief Run time parameter check activation + */ +#define USE_HAL_CHECK_PARAM 0U +#define USE_HAL_SECURE_CHECK_PARAM 0U +/** + * @} + */ + +/** @defgroup HAL_State_Transition HAL State Transition + * @{ + */ +/* ########################## State transition ################################ */ +/** + * @brief Enable protection of state transition in thread safe + */ +#define USE_HAL_CHECK_PROCESS_STATE 0U +/** + * @} + */ + +/* ########################## Peripheral configuration ######################### */ + +/** @defgroup HAL_ADC_Config HAL ADC Configuration + * @{ + */ +/* ########################## HAL_ADC Config #################################### */ +#define USE_HAL_ADC_MODULE 0U +#define USE_HAL_ADC_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U +#define USE_HAL_ADC_USER_DATA 0U +#define USE_HAL_ADC_GET_LAST_ERRORS 0U +#define USE_HAL_ADC_DMA 0U +/** + * @} + */ + +/** @defgroup HAL_AES_Config HAL AES Configuration + * @{ + */ +/* ########################## HAL_AES Config #################################### */ +#define USE_HAL_AES_MODULE 0U +#define USE_HAL_AES_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_AES_REGISTER_CALLBACKS 0U +#define USE_HAL_AES_USER_DATA 0U +#define USE_HAL_AES_GET_LAST_ERRORS 0U +#define USE_HAL_AES_DMA 0U +#define USE_HAL_AES_ECB_CBC_ALGO 0U +#define USE_HAL_AES_CTR_ALGO 0U +#define USE_HAL_AES_GCM_GMAC_ALGO 0U +#define USE_HAL_AES_CCM_ALGO 0U +#define USE_HAL_AES_SUSPEND_RESUME 0U +/** + * @} + */ + +/** @defgroup HAL_CCB_Config HAL CCB Configuration + * @{ + */ +/* ########################## HAL_CCB Config #################################### */ +#define USE_HAL_CCB_MODULE 0U +#define USE_HAL_CCB_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_CCB_USER_DATA 0U +#define USE_HAL_CCB_GET_LAST_ERRORS 0U +/** + * @} + */ + +/** @defgroup HAL_COMP_Config HAL COMP Configuration + * @{ + */ +/* ########################## HAL_COMP Config ################################### */ +#define USE_HAL_COMP_MODULE 0U +#define USE_HAL_COMP_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U +#define USE_HAL_COMP_USER_DATA 0U +/* Use comparator with EXTI (needed to generate system wake-up event and CPU event) */ +#define USE_HAL_COMP_EXTI 0U +/* Use comparators window mode feature */ +#define USE_HAL_COMP_WINDOW_MODE 0U +/** + * @} + */ + +/** @defgroup HAL_CORDIC_Config HAL CORDIC Configuration + * @{ + */ +/* ########################## HAL_CORDIC Config ################################# */ +#define USE_HAL_CORDIC_MODULE 0U +#define USE_HAL_CORDIC_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U +#define USE_HAL_CORDIC_USER_DATA 0U +#define USE_HAL_CORDIC_GET_LAST_ERRORS 0U +#define USE_HAL_CORDIC_DMA 0U +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Config HAL CORTEX Configuration + * @{ + */ +/* ########################## HAL_CORTEX Config ################################# */ +#define USE_HAL_CORTEX_MODULE 1U +/** + * @} + */ + +/** @defgroup HAL_CRC_Config HAL CRC Configuration + * @{ + */ +/* ########################## HAL_CRC Config #################################### */ +#define USE_HAL_CRC_MODULE 0U +#define USE_HAL_CRC_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_CRC_USER_DATA 0U +/** + * @} + */ + +/** @defgroup HAL_CRS_Config HAL CRS Configuration + * @{ + */ +/* ########################## HAL_CRS Config #################################### */ +#define USE_HAL_CRS_MODULE 0U +#define USE_HAL_CRS_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_CRS_REGISTER_CALLBACKS 0U +#define USE_HAL_CRS_USER_DATA 0U +#define USE_HAL_CRS_GET_LAST_ERRORS 0U +/** + * @} + */ + +/** @defgroup HAL_DAC_Config HAL DAC Configuration + * @{ + */ +/* ########################## HAL_DAC Config #################################### */ +#define USE_HAL_DAC_MODULE 0U +#define USE_HAL_DAC_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U +#define USE_HAL_DAC_USER_DATA 0U +#define USE_HAL_DAC_GET_LAST_ERRORS 0U +#define USE_HAL_DAC_DMA 0U +#define USE_HAL_DAC_DUAL_CHANNEL 0U +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Config HAL DBGMCU Configuration + * @{ + */ +/* ########################## HAL_DBGMCU Config ################################# */ +#define USE_HAL_DBGMCU_MODULE 0U +/** + * @} + */ + +/** @defgroup HAL_DMA_Config HAL DMA Configuration + * @{ + */ +/* ########################## HAL_DMA Config #################################### */ +#define USE_HAL_DMA_MODULE 1U +#define USE_HAL_DMA_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_DMA_USER_DATA 0U +#define USE_HAL_DMA_GET_LAST_ERRORS 0U +#define USE_HAL_DMA_LINKEDLIST 0U +/** + * @} + */ + +/** @defgroup HAL_ETH_Config HAL ETH Configuration + * @{ + */ +/* ########################## HAL_ETH Config #################################### */ +#define USE_HAL_ETH_MODULE 0U +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U +#define USE_HAL_ETH_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_ETH_USER_DATA 0U +#define USE_HAL_ETH_GET_LAST_ERRORS 0U +#define USE_HAL_ETH_ATOMIC_CHANNEL_LOCK 0U +#define USE_HAL_ETH_MAX_TX_CH_NB 1U +#define USE_HAL_ETH_MAX_RX_CH_NB 1U +/** + * @} + */ + +/** @defgroup HAL_EXTI_Config HAL EXTI Configuration + * @{ + */ +/* ########################## HAL_EXTI Config ################################### */ +#define USE_HAL_EXTI_MODULE 0U +#define USE_HAL_EXTI_REGISTER_CALLBACKS 0U +#define USE_HAL_EXTI_USER_DATA 0U +/** + * @} + */ + +/** @defgroup HAL_FDCAN_Config HAL FDCAN Configuration + * @{ + */ +/* ########################## HAL_FDCAN Config ################################## */ +#define USE_HAL_FDCAN_MODULE 0U +#define USE_HAL_FDCAN_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U +#define USE_HAL_FDCAN_USER_DATA 0U +#define USE_HAL_FDCAN_GET_LAST_ERRORS 0U +/** + * @} + */ + +/** @defgroup HAL_FLASH_Config HAL FLASH Configuration + * @{ + */ +/* ########################## HAL_FLASH Config ################################## */ +#define USE_HAL_FLASH_MODULE 1U +#define USE_HAL_FLASH_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_FLASH_REGISTER_CALLBACKS 0U +#define USE_HAL_FLASH_USER_DATA 0U +#define USE_HAL_FLASH_GET_LAST_ERRORS 0U +/* Use the FLASH program by address feature */ +#define USE_HAL_FLASH_PROGRAM_BY_ADDR 0U +/* Use the FLASH erase by address feature */ +#define USE_HAL_FLASH_ERASE_BY_ADDR 0U +/* Use the FLASH erase by PAGE feature */ +#define USE_HAL_FLASH_ERASE_PAGE 0U +/* Use the FLASH bank erase feature */ +#define USE_HAL_FLASH_ERASE_BANK 0U +/* Use the FLASH mass erase feature */ +#define USE_HAL_FLASH_MASS_ERASE 0U +/* Use ECC errors handling APIs */ +#define USE_HAL_FLASH_ECC 0U +/* Use FLASH HAL API for EDATA */ +#define USE_HAL_FLASH_OB_EDATA 0U +/** + * @} + */ + +/** @defgroup HAL_GPIO_Config HAL GPIO Configuration + * @{ + */ +/* ########################## HAL_GPIO Config ################################### */ +#define USE_HAL_GPIO_MODULE 1U +#define USE_HAL_GPIO_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +/** + * @} + */ + +/** @defgroup HAL_HASH_Config HAL HASH Configuration + * @{ + */ +/* ########################## HAL_HASH Config ################################### */ +#define USE_HAL_HASH_MODULE 0U +#define USE_HAL_HASH_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U +#define USE_HAL_HASH_USER_DATA 0U +#define USE_HAL_HASH_GET_LAST_ERRORS 0U +#define USE_HAL_HASH_DMA 0U +/** + * @} + */ + +/** @defgroup HAL_HCD_Config HAL HCD Configuration + * @{ + */ +/* ########################## HAL_HCD Config #################################### */ +#define USE_HAL_HCD_MODULE 0U +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U +#define USE_HAL_HCD_USER_DATA 0U +#define USE_HAL_HCD_GET_LAST_ERRORS 0U +#define USE_HAL_HCD_USB_DOUBLE_BUFFER 0U +#define USE_HAL_HCD_USB_EP_TYPE_ISOC 0U +#define USE_HAL_HCD_MAX_CHANNEL_NB 16U +/** + * @} + */ + +/** @defgroup HAL_I2C_Config HAL I2C Configuration + * @{ + */ +/* ########################## HAL_I2C Config #################################### */ +#define USE_HAL_I2C_MODULE 0U +#define USE_HAL_I2C_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U +#define USE_HAL_I2C_USER_DATA 0U +#define USE_HAL_I2C_GET_LAST_ERRORS 0U +#define USE_HAL_I2C_DMA 0U +/** + * @} + */ + +/** @defgroup HAL_I3C_Config HAL I3C Configuration + * @{ + */ +/* ########################## HAL_I3C Config #################################### */ +#define USE_HAL_I3C_MODULE 0U +#define USE_HAL_I3C_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_I3C_REGISTER_CALLBACKS 0U +#define USE_HAL_I3C_USER_DATA 0U +#define USE_HAL_I3C_GET_LAST_ERRORS 0U +#define USE_HAL_I3C_DMA 0U +/** + * @} + */ + +/** @defgroup HAL_I2S_Config HAL I2S Configuration + * @{ + */ +/* ########################## HAL_I2S Config #################################### */ +#define USE_HAL_I2S_MODULE 0U +#define USE_HAL_I2S_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U +#define USE_HAL_I2S_USER_DATA 0U +#define USE_HAL_I2S_GET_LAST_ERRORS 0U +#define USE_HAL_I2S_OVR_UDR_ERRORS 0U +#define USE_HAL_I2S_DMA 0U +/** + * @} + */ + +/** @defgroup HAL_ICACHE_Config HAL ICACHE Configuration + * @{ + */ +/* ########################## HAL_ICACHE Config ################################# */ +#define USE_HAL_ICACHE_MODULE 1U +#define USE_HAL_ICACHE_REGISTER_CALLBACKS 0U +#define USE_HAL_ICACHE_USER_DATA 0U +#define USE_HAL_ICACHE_GET_LAST_ERRORS 0U +/** + * @} + */ + +/** @defgroup HAL_IWDG_Config HAL IWDG Configuration + * @{ + */ +/* ########################## HAL_IWDG Config ################################### */ +#define USE_HAL_IWDG_MODULE 0U +#define USE_HAL_IWDG_REGISTER_CALLBACKS 0U +#define USE_HAL_IWDG_USER_DATA 0U +/* IWDG time unit configuration */ +#define USE_HAL_IWDG_TIME_UNIT HAL_IWDG_TIME_UNIT_MS +/* IWDG hardware start configuration + warning: In case of starting IWDG in Hardware mode, make sure that + USE_HAL_IWDG_HARDWARE_START is aligned with OB activated set for IWDG */ +#define USE_HAL_IWDG_HARDWARE_START 0U +/* User can choose the value of the LSI frequency with the USE_HAL_IWDG_LSI_FREQ define: + - 0U : Dynamic LSI to be computed and set by the user. + - LSI_VALUE : LSI value of 32KHz. + - (LSI_VALUE / 128U): LSI value of 250Hz */ +#define USE_HAL_IWDG_LSI_FREQ LSI_VALUE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Config HAL LPTIM Configuration + * @{ + */ +/* ########################## HAL_LPTIM Config ################################## */ +#define USE_HAL_LPTIM_MODULE 0U +#define USE_HAL_LPTIM_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U +#define USE_HAL_LPTIM_USER_DATA 0U +#define USE_HAL_LPTIM_GET_LAST_ERRORS 0U +#define USE_HAL_LPTIM_DMA 0U +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Config HAL OPAMP Configuration + * @{ + */ +/* ########################## HAL_OPAMP Config ################################## */ +#define USE_HAL_OPAMP_MODULE 0U +#define USE_HAL_OPAMP_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_OPAMP_USER_DATA 0U +/** + * @} + */ + +/** @defgroup HAL_PCD_Config HAL PCD Configuration + * @{ + */ +/* ########################## HAL_PCD Config #################################### */ +#define USE_HAL_PCD_MODULE 1U +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U +#define USE_HAL_PCD_USER_DATA 0U +#define USE_HAL_PCD_GET_LAST_ERRORS 0U +#define USE_HAL_PCD_USB_DOUBLE_BUFFER 0U +#define USE_HAL_PCD_USB_LPM 0U +#define USE_HAL_PCD_USB_BCD 0U +#define USE_HAL_PCD_USB_EP_TYPE_ISOC 0U +#define USE_HAL_PCD_MAX_ENDPOINT_NB 8U +/** + * @} + */ + +/** @defgroup HAL_PKA_Config HAL PKA Configuration + * @{ + */ +/* ########################## HAL_PKA Config #################################### */ +#define USE_HAL_PKA_MODULE 0U +#define USE_HAL_PKA_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_PKA_REGISTER_CALLBACKS 0U +#define USE_HAL_PKA_USER_DATA 0U +#define USE_HAL_PKA_GET_LAST_ERRORS 0U +/** + * @} + */ + +/** @defgroup HAL_PWR_Config HAL PWR Configuration + * @{ + */ +/* ########################## HAL_PWR Config #################################### */ +#define USE_HAL_PWR_MODULE 1U +/** + * @} + */ + +/** @defgroup HAL_RAMCFG_Config HAL RAMCFG Configuration + * @{ + */ +/* ########################## HAL_RAMCFG Config ################################# */ +#define USE_HAL_RAMCFG_MODULE 0U +/** + * @} + */ + +/** @defgroup HAL_RCC_Config HAL RCC Configuration + * @{ + */ +/* ########################## HAL_RCC Config #################################### */ +#define USE_HAL_RCC_MODULE 1U +/* Use RCC HAL API for Reset function */ +#define USE_HAL_RCC_RESET_PERIPH_CLOCK_MANAGEMENT 0U +#define USE_HAL_RCC_RESET_RTC_DOMAIN 0U +/** + * @} + */ + +/** @defgroup HAL_RNG_Config HAL RNG Configuration + * @{ + */ +/* ########################## HAL_RNG Config #################################### */ +#define USE_HAL_RNG_MODULE 0U +#define USE_HAL_RNG_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U +#define USE_HAL_RNG_USER_DATA 0U +#define USE_HAL_RNG_GET_LAST_ERRORS 0U +/** + * @} + */ + +/** @defgroup HAL_RTC_Config HAL RTC Configuration + * @{ + */ +/* ########################## HAL_RTC Config #################################### */ +#define USE_HAL_RTC_MODULE 0U +/** + * @} + */ + +/** @defgroup HAL_SBS_Config HAL SBS Configuration + * @{ + */ +/* ########################## HAL_SBS Config #################################### */ +#define USE_HAL_SBS_MODULE 0U +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Config HAL SMARTCARD Configuration + * @{ + */ +/* ########################## HAL_SMARTCARD Config ############################## */ +#define USE_HAL_SMARTCARD_MODULE 0U +#define USE_HAL_SMARTCARD_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U +#define USE_HAL_SMARTCARD_USER_DATA 0U +#define USE_HAL_SMARTCARD_GET_LAST_ERRORS 0U +#define USE_HAL_SMARTCARD_DMA 0U +/* #################### SMARTCARD FIFO configuration ######################## */ +#define USE_HAL_SMARTCARD_FIFO 0U +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Config HAL SMBUS Configuration + * @{ + */ +/* ########################## HAL_SMBUS Config ################################## */ +#define USE_HAL_SMBUS_MODULE 0U +#define USE_HAL_SMBUS_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U +#define USE_HAL_SMBUS_USER_DATA 0U +#define USE_HAL_SMBUS_GET_LAST_ERRORS 0U +/** + * @} + */ + +/** @defgroup HAL_SPI_Config HAL SPI Configuration + * @{ + */ +/* ########################## HAL_SPI Config #################################### */ +#define USE_HAL_SPI_MODULE 0U +#define USE_HAL_SPI_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U +#define USE_HAL_SPI_USER_DATA 0U +#define USE_HAL_SPI_GET_LAST_ERRORS 0U +#define USE_HAL_SPI_DMA 0U +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ +#define USE_HAL_SPI_CRC 0U +/** + * @} + */ + +/** @defgroup HAL_TAMP_Config HAL TAMP Configuration + * @{ + */ +/* ########################## HAL_TAMP Config ################################### */ +#define USE_HAL_TAMP_MODULE 0U +/** + * @} + */ + +/** @defgroup HAL_TIM_Config HAL TIM Configuration + * @{ + */ +/* ########################## HAL_TIM Config #################################### */ +#define USE_HAL_TIM_MODULE 0U +#define USE_HAL_TIM_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U +#define USE_HAL_TIM_USER_DATA 0U +#define USE_HAL_TIM_GET_LAST_ERRORS 0U +#define USE_HAL_TIM_DMA 0U +/** + * @} + */ + +/** @defgroup HAL_UART_Config HAL UART Configuration + * @{ + */ +/* ########################## HAL_UART Config ################################### */ +#define USE_HAL_UART_MODULE 1U +#define USE_HAL_UART_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_UART_REGISTER_CALLBACKS 0U +#define USE_HAL_UART_USER_DATA 0U +#define USE_HAL_UART_GET_LAST_ERRORS 0U +#define USE_HAL_UART_DMA 0U +/** + * @} + */ + +/** @defgroup HAL_USART_Config HAL USART Configuration + * @{ + */ +/* ########################## HAL_USART Config ################################## */ +#define USE_HAL_USART_MODULE 0U +#define USE_HAL_USART_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_USART_REGISTER_CALLBACKS 0U +#define USE_HAL_USART_USER_DATA 0U +#define USE_HAL_USART_GET_LAST_ERRORS 0U +#define USE_HAL_USART_DMA 0U +#define USE_HAL_USART_FIFO 0U +/** + * @} + */ + +/** @defgroup HAL_WWDG_Config HAL WWDG Configuration + * @{ + */ +/* ########################## HAL_WWDG Config ################################### */ +#define USE_HAL_WWDG_MODULE 0U +#define USE_HAL_WWDG_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U +#define USE_HAL_WWDG_USER_DATA 0U +/* WWDG time unit configuration */ +#define USE_HAL_WWDG_TIME_UNIT HAL_WWDG_TIME_UNIT_MS +/* WWDG hardware start configuration + warning: In case of starting WWDG in Hardware mode, make sure that + USE_HAL_WWDG_HARDWARE_START is aligned with OB activated set for WWDG */ +#define USE_HAL_WWDG_HARDWARE_START 0U +/** + * @} + */ + +/** @defgroup HAL_XSPI_Config HAL XSPI Configuration + * @{ + */ +/* ########################## HAL_XSPI Config ################################### */ +#define USE_HAL_XSPI_MODULE 0U +#define USE_HAL_XSPI_CLK_ENABLE_MODEL HAL_CLK_ENABLE_NO +#define USE_HAL_XSPI_REGISTER_CALLBACKS 0U +#define USE_HAL_XSPI_USER_DATA 0U +#define USE_HAL_XSPI_GET_LAST_ERRORS 0U +#define USE_HAL_XSPI_DMA 0U +#define USE_HAL_XSPI_HYPERBUS 0U +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32C5XX_HAL_CONF_H */ diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index c85ade4d0..cd9b3dc27 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -206,6 +206,12 @@ #define TUP_USBIP_FSDEV_DRD #define CFG_TUSB_FSDEV_PMA_SIZE 2048u +#elif TU_CHECK_MCU(OPT_MCU_STM32C5) + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define TUP_USBIP_FSDEV_DRD + #define CFG_TUSB_FSDEV_PMA_SIZE 2048u + #elif TU_CHECK_MCU(OPT_MCU_STM32F0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 41da3ddd0..4dfd04fb4 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -41,6 +41,7 @@ * F302xB/C, F303xB/C, F373 512 byte buffer; no internal D+ pull-up * F302x6/8, F302xD/E2, F303xD/E 1024 byte buffer; no internal D+ pull-up * C0 2048 byte buffer; 32-bit bus; host mode + * C5 2048 byte buffer; 32-bit bus; host mode * G0 2048 byte buffer; 32-bit bus; host mode * G4 1024 byte buffer * H5 2048 byte buffer; 32-bit bus; host mode diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index 070aa00ec..74cc9d0a4 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -36,6 +36,10 @@ #include "stm32c0xx.h" #define FSDEV_HAS_SBUF_ISO 1 +#elif CFG_TUSB_MCU == OPT_MCU_STM32C5 + #include "stm32c5xx.h" + #define FSDEV_HAS_SBUF_ISO 1 + #elif CFG_TUSB_MCU == OPT_MCU_STM32F0 #include "stm32f0xx.h" #define FSDEV_HAS_SBUF_ISO 0 @@ -177,7 +181,7 @@ static const IRQn_Type fsdev_irq[] = { USB_IRQn, #elif TU_CHECK_MCU(OPT_MCU_STM32L5, OPT_MCU_STM32U3) USB_FS_IRQn, - #elif TU_CHECK_MCU(OPT_MCU_STM32C0, OPT_MCU_STM32H5, OPT_MCU_STM32U0) + #elif TU_CHECK_MCU(OPT_MCU_STM32C0, OPT_MCU_STM32C5, OPT_MCU_STM32H5, OPT_MCU_STM32U0) USB_DRD_FS_IRQn, #elif CFG_TUSB_MCU == OPT_MCU_STM32G0 #ifdef STM32G0B0xx @@ -276,6 +280,8 @@ TU_ATTR_ALWAYS_INLINE static inline void fsdev_int_disable(uint8_t rhport) { #define FSDEV_STM32_CPU_MHZ 64U #elif CFG_TUSB_MCU == OPT_MCU_STM32C0 #define FSDEV_STM32_CPU_MHZ 48U +#elif CFG_TUSB_MCU == OPT_MCU_STM32C5 + #define FSDEV_STM32_CPU_MHZ 144U #endif #ifndef CFG_TUSB_FSDEV_BTABLE_FS_DELAY_COUNT diff --git a/src/tusb_option.h b/src/tusb_option.h index 154f8e2a4..83b6d3e51 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -98,6 +98,7 @@ #define OPT_MCU_STM32N6 319 ///< ST N6 #define OPT_MCU_STM32WBA 320 ///< ST WBA #define OPT_MCU_STM32U3 321 ///< ST U3 +#define OPT_MCU_STM32C5 322 ///< ST C5 // Sony #define OPT_MCU_CXD56 400 ///< SONY CXD56 diff --git a/tools/get_deps.py b/tools/get_deps.py index eb87abf6e..50497fc71 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -163,6 +163,9 @@ deps_optional = { 'hw/mcu/st/cmsis-device-wba': ['https://github.com/STMicroelectronics/cmsis-device-wba.git', '647d8522e5fd15049e9a1cc30ed19d85e5911eaf', 'stm32wba'], + 'hw/mcu/st/stm32c5xx-dfp': ['https://github.com/STMicroelectronics/stm32c5xx-dfp.git', + '6d0940882511d9430f83af9bd3da6bcb77f79239', + 'stm32c5'], 'hw/mcu/st/stm32-mfxstm32l152': ['https://github.com/STMicroelectronics/stm32-mfxstm32l152.git', '7f4389efee9c6a655b55e5df3fceef5586b35f9b', 'stm32h7'], @@ -232,6 +235,9 @@ deps_optional = { 'hw/mcu/st/stm32wbaxx_hal_driver': ['https://github.com/STMicroelectronics/stm32wbaxx_hal_driver.git', '9442fbb71f855ff2e64fbf662b7726beba511a24', 'stm32wba'], + 'hw/mcu/st/stm32c5xx-drivers': ['https://github.com/STMicroelectronics/stm32c5xx-drivers.git', + '79b901285a7efeaf87c4c25db81d24cb5d8c9465', + 'stm32c5'], 'hw/mcu/ti': ['https://github.com/hathach/ti_driver.git', '083944907e7d08fcb1f614b47598ce45935b8da1', 'msp430 msp432e4 tm4c'], @@ -284,7 +290,7 @@ deps_optional = { 'tm4c '], 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', '6f0a58d01aa9bd2feba212097f9afe7acd991d52', - 'imxrt kinetis_k32l ra stm32n6 lpc51 lpc55 mcx'], + 'imxrt kinetis_k32l ra stm32n6 lpc51 lpc55 mcx stm32c5'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1 From 77cef83304c92402a133fc936c44d182fc99ecf0 Mon Sep 17 00:00:00 2001 From: Saulo Veríssimo Date: Tue, 24 Mar 2026 23:38:14 -0300 Subject: test: add MIDI 2.0 Device and Host unit tests Add unit tests for MIDI 2.0 drivers: - Device: UMP word count (all 16 message types), descriptor macro validation (length, byte layout, alt settings, endpoints), CS endpoint subtypes, traversal integrity - Host: UMP word count, callback struct validation, CS endpoint subtypes Also add Sphinx documentation for MIDI 2.0 class drivers (Device and Host API reference, lifecycle, configuration, examples). Tests: 60/60 PASS (FIFO 26/26, USBD 5/5, MIDI2 Device 18/18, MIDI2 Host 6/6, USBD internal 5/5) --- docs/reference/class_drivers.rst | 316 +++++++++++++++++++++ docs/reference/index.rst | 1 + .../test/device/midi2/test_midi2_device.c | 263 +++++++++++++++++ test/unit-test/test/host/midi2/test_midi2_host.c | 101 +++++++ 4 files changed, 681 insertions(+) create mode 100644 docs/reference/class_drivers.rst create mode 100644 test/unit-test/test/device/midi2/test_midi2_device.c create mode 100644 test/unit-test/test/host/midi2/test_midi2_host.c (limited to 'docs/reference') diff --git a/docs/reference/class_drivers.rst b/docs/reference/class_drivers.rst new file mode 100644 index 000000000..9ed332acb --- /dev/null +++ b/docs/reference/class_drivers.rst @@ -0,0 +1,316 @@ +*************** +Class Drivers +*************** + +USB Class Drivers implement specific USB device classes (CDC, HID, MSC, MIDI, Audio, etc.) and are the main interface between the USB core and application code. + +MIDI 2.0 Device Driver +======================= + +Overview +-------- + +The MIDI 2.0 Device driver enables TinyUSB to act as a USB MIDI 2.0 device. It implements both Alt Setting 0 (MIDI 1.0 fallback) and Alt Setting 1 (native UMP) as required by the USB-MIDI 2.0 specification. + +**Key Features:** + +- **Dual Alt Settings**: Alt 0 (MIDI 1.0) and Alt 1 (UMP native) per USB-MIDI 2.0 spec +- **Protocol Negotiation**: Endpoint Discovery, Config Request/Notify, Function Block Discovery +- **Group Terminal Block**: Served via GET_DESCRIPTOR automatically +- **Atomic UMP Framing**: Read/write with correct message boundaries +- **Memory Safe**: No dynamic allocation, static instances + +Configuration +------------- + +Enable MIDI 2.0 Device support in ``tusb_config.h``: + +.. code-block:: c + + #define CFG_TUD_ENABLED 1 + #define CFG_TUD_MIDI2 1 + +Optional configuration: + +.. code-block:: c + + #define CFG_TUD_MIDI2_TX_BUFSIZE 256 + #define CFG_TUD_MIDI2_RX_BUFSIZE 256 + #define CFG_TUD_MIDI2_TX_EPSIZE 64 + #define CFG_TUD_MIDI2_RX_EPSIZE 64 + #define CFG_TUD_MIDI2_NUM_GROUPS 1 // 1..16 + #define CFG_TUD_MIDI2_NUM_FUNCTION_BLOCKS 1 // 1..32 + #define CFG_TUD_MIDI2_EP_NAME "TinyUSB MIDI 2.0" + #define CFG_TUD_MIDI2_PRODUCT_ID "TinyUSB-MIDI2" + +Public API +---------- + +Query Functions +^^^^^^^^^^^^^^^ + +.. code-block:: c + + bool tud_midi2_mounted(void); + uint32_t tud_midi2_available(void); + uint8_t tud_midi2_alt_setting(void); + bool tud_midi2_negotiated(void); + uint8_t tud_midi2_protocol(void); + +I/O Functions +^^^^^^^^^^^^^ + +.. code-block:: c + + uint32_t tud_midi2_ump_read(uint32_t* words, uint32_t max_words); + uint32_t tud_midi2_ump_write(const uint32_t* words, uint32_t count); + bool tud_midi2_packet_read(uint8_t packet[4]); + bool tud_midi2_packet_write(const uint8_t packet[4]); + +Callbacks +^^^^^^^^^ + +.. code-block:: c + + void tud_midi2_rx_cb(uint8_t itf); + void tud_midi2_set_itf_cb(uint8_t itf, uint8_t alt); + bool tud_midi2_get_req_itf_cb(uint8_t rhport, const tusb_control_request_t* request); + +MIDI 2.0 Host Driver +===================== + +Overview +-------- + +The MIDI 2.0 Host driver enables TinyUSB to enumerate and communicate with USB MIDI 2.0 devices. It implements the USB MIDI 2.0 specification, supporting both MIDI 1.0 legacy devices and modern MIDI 2.0 devices with UMP (Universal MIDI Packet) protocol. + +**Key Features:** + +- **Reactive Architecture**: Auto-detects Alt Setting 1 (MIDI 2.0) capability during enumeration +- **Auto-Selection**: Automatically selects the highest available protocol (MIDI 2.0 preferred) +- **Transparent Stream Messages**: All data (UMP packets + Stream Messages) flow through callbacks +- **Memory Safe**: No dynamic allocation, fixed-size instances per device + +Configuration +------------- + +Enable MIDI 2.0 Host support in ``tusb_config.h``: + +.. code-block:: c + + #define CFG_TUH_ENABLED 1 + #define CFG_TUH_MIDI2 4 // Number of MIDI 2.0 devices to support + +Optional buffer configuration: + +.. code-block:: c + + #define CFG_TUH_MIDI2_RX_BUFSIZE (4 * TUH_EPSIZE_BULK_MAX) + #define CFG_TUH_MIDI2_TX_BUFSIZE (4 * TUH_EPSIZE_BULK_MAX) + +Enumeration Lifecycle +--------------------- + +When a MIDI 2.0 device is connected, the host stack invokes callbacks in this order: + +.. code-block:: none + + Device Connected + | + [Host detects Alt 0 and Alt 1 descriptors] + | + tuh_midi2_descriptor_cb() <- Device detected, NOT yet ready + | + [Auto-select highest protocol] + | + tuh_midi2_mount_cb() <- Device ready to use + | + [Application can read/write data] + | + tuh_midi2_rx_cb() <- Data arrived + tuh_midi2_tx_cb() <- TX buffer space available + | + [Device disconnects] + | + tuh_midi2_umount_cb() <- Device removed + +Public API +---------- + +Query Functions +^^^^^^^^^^^^^^^ + +.. code-block:: c + + bool tuh_midi2_mounted(uint8_t idx); + uint8_t tuh_midi2_get_protocol_version(uint8_t idx); // 0=MIDI 1.0, 1=MIDI 2.0 + uint8_t tuh_midi2_get_alt_setting_active(uint8_t idx); // 0 or 1 + uint8_t tuh_midi2_get_cable_count(uint8_t idx); + +I/O Functions +^^^^^^^^^^^^^ + +Read and write UMP (Universal MIDI Packet) data: + +.. code-block:: c + + uint32_t tuh_midi2_ump_read(uint8_t idx, uint32_t* words, uint32_t max_words); + uint32_t tuh_midi2_ump_write(uint8_t idx, const uint32_t* words, uint32_t count); + uint32_t tuh_midi2_write_flush(uint8_t idx); + +Callbacks +--------- + +Application can define weak callback implementations to respond to device events. + +Descriptor Callback +^^^^^^^^^^^^^^^^^^^ + +Invoked when device is detected but not yet ready for I/O: + +.. code-block:: c + + void tuh_midi2_descriptor_cb(uint8_t idx, const tuh_midi2_descriptor_cb_t *desc_cb_data) { + printf("MIDI %s device detected\r\n", + desc_cb_data->protocol_version == 0 ? "1.0" : "2.0"); + } + +Mount Callback +^^^^^^^^^^^^^^ + +Invoked when device is ready for I/O: + +.. code-block:: c + + void tuh_midi2_mount_cb(uint8_t idx, const tuh_midi2_mount_cb_t *mount_cb_data) { + printf("Device mounted at idx=%u, protocol=%u, alt_setting=%u\r\n", + idx, mount_cb_data->protocol_version, mount_cb_data->alt_setting_active); + } + +RX Callback +^^^^^^^^^^^ + +Invoked when data arrives from device (both UMP packets and Stream Messages): + +.. code-block:: c + + void tuh_midi2_rx_cb(uint8_t idx, uint32_t xferred_bytes) { + uint32_t words[4]; + uint32_t n = tuh_midi2_ump_read(idx, words, 4); + + for (uint32_t i = 0; i < n; i++) { + uint8_t mt = (words[i] >> 28) & 0x0F; + if (mt == 0x0F) { + // Stream Message - app handles discovery, negotiation, etc. + } else { + // Regular MIDI UMP packet + } + } + } + +TX Callback +^^^^^^^^^^^ + +Invoked when TX buffer space becomes available: + +.. code-block:: c + + void tuh_midi2_tx_cb(uint8_t idx, uint32_t xferred_bytes) { + // Buffer space available for writing + } + +Unmount Callback +^^^^^^^^^^^^^^^^ + +Invoked when device is disconnected: + +.. code-block:: c + + void tuh_midi2_umount_cb(uint8_t idx) { + printf("Device at idx=%u disconnected\r\n", idx); + } + +Complete Example +---------------- + +.. code-block:: c + + #include "tusb.h" + + void tuh_midi2_mount_cb(uint8_t idx, const tuh_midi2_mount_cb_t *mount_cb_data) { + printf("MIDI 2.0 device mounted\r\n"); + } + + void tuh_midi2_rx_cb(uint8_t idx, uint32_t xferred_bytes) { + uint32_t words[4]; + uint32_t n = tuh_midi2_ump_read(idx, words, 4); + + for (uint32_t i = 0; i < n; i++) { + printf("RX: 0x%08lx\r\n", words[i]); + } + } + + void tuh_midi2_umount_cb(uint8_t idx) { + printf("MIDI 2.0 device disconnected\r\n"); + } + + int main(void) { + board_init(); + + tusb_rhport_init_t host_init = {.role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO}; + tusb_init(BOARD_TUH_RHPORT, &host_init); + + while (1) { + tuh_task(); + } + } + +Architecture +------------ + +The MIDI 2.0 Host driver uses a **reactive, callback-driven architecture** that mirrors the proven patterns in TinyUSB's existing device drivers (CDC, HID, etc.): + +- **Auto-Detection**: Host automatically detects Alt Setting 1 capability +- **Auto-Selection**: Selects highest protocol available (MIDI 2.0 preferred) +- **Application Control**: App makes protocol behavior decisions via callbacks +- **Transparent I/O**: Stream Messages and UMP packets flow transparently + +Differences from MIDI 1.0 Host +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. list-table:: + :header-rows: 1 + + * - Aspect + - MIDI 1.0 Host + - MIDI 2.0 Host + * - Alt Settings + - Parses only Alt 0 + - Parses Alt 0 + Alt 1 + * - Data Format + - 4-byte MIDI packets + - UMP (32/64/128-bit) + * - Version Detection + - None + - bcdMSC from descriptor + * - GTB + - N/A + - Presence detection + * - Stream Messages + - N/A + - Transparent passthrough + * - Callbacks + - descriptor_cb, mount_cb, rx_cb, umount_cb + - descriptor_cb, mount_cb, rx_cb, tx_cb, umount_cb + * - Public API + - tuh_midi_* + - tuh_midi2_* + +Implementation Notes +-------------------- + +- All internal state is statically allocated (no dynamic allocation) +- Endpoint streams use TinyUSB's tu_edpt_stream_t for buffered I/O +- Protocol version detection via bcdMSC field +- Alt Setting is automatically selected during mount +- Compatible with all TinyUSB-supported MCU families diff --git a/docs/reference/index.rst b/docs/reference/index.rst index d3c96eeee..148e8a63b 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -9,6 +9,7 @@ Complete reference documentation for TinyUSB APIs, configuration, and supported architecture usb_concepts + class_drivers boards dependencies concurrency diff --git a/test/unit-test/test/device/midi2/test_midi2_device.c b/test/unit-test/test/device/midi2/test_midi2_device.c new file mode 100644 index 000000000..9d716d93b --- /dev/null +++ b/test/unit-test/test/device/midi2/test_midi2_device.c @@ -0,0 +1,263 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2026 Saulo Verissimo + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "unity.h" +#include "tusb_types.h" +#include "class/audio/audio.h" +#include "class/midi/midi.h" +#include "device/usbd.h" + +void setUp(void) {} +void tearDown(void) {} + +//--------------------------------------------------------------------+ +// UMP Word Count: all 16 message types +//--------------------------------------------------------------------+ + +void test_ump_word_count_1word_types(void) { + uint8_t types[] = {0x0, 0x1, 0x2, 0x6, 0x7}; + for (int i = 0; i < 5; i++) { + TEST_ASSERT_EQUAL(1, midi2_ump_word_count(types[i])); + } +} + +void test_ump_word_count_2word_types(void) { + uint8_t types[] = {0x3, 0x4, 0x8, 0x9, 0xA}; + for (int i = 0; i < 5; i++) { + TEST_ASSERT_EQUAL(2, midi2_ump_word_count(types[i])); + } +} + +void test_ump_word_count_3word_types(void) { + TEST_ASSERT_EQUAL(3, midi2_ump_word_count(0xB)); + TEST_ASSERT_EQUAL(3, midi2_ump_word_count(0xC)); +} + +void test_ump_word_count_4word_types(void) { + uint8_t types[] = {0x5, 0xD, 0xE, 0xF}; + for (int i = 0; i < 4; i++) { + TEST_ASSERT_EQUAL(4, midi2_ump_word_count(types[i])); + } +} + +void test_ump_word_count_covers_all_16(void) { + for (uint8_t mt = 0; mt <= 0xF; mt++) { + uint8_t wc = midi2_ump_word_count(mt); + TEST_ASSERT_TRUE(wc >= 1 && wc <= 4); + } +} + +//--------------------------------------------------------------------+ +// CS Endpoint subtypes (defined in midi.h) +//--------------------------------------------------------------------+ + +void test_cs_endpoint_subtypes(void) { + TEST_ASSERT_EQUAL(0x01, MIDI_CS_ENDPOINT_GENERAL); + TEST_ASSERT_EQUAL(0x02, MIDI_CS_ENDPOINT_GENERAL_2_0); +} + +//--------------------------------------------------------------------+ +// Descriptor macro length calculations +//--------------------------------------------------------------------+ + +void test_midi1_desc_len(void) { + TEST_ASSERT_EQUAL(TUD_MIDI_DESC_HEAD_LEN + TUD_MIDI_DESC_JACK_LEN + TUD_MIDI_DESC_EP_LEN(1) * 2, + TUD_MIDI_DESC_LEN); +} + +void test_midi2_alt1_head_len(void) { + TEST_ASSERT_EQUAL(16, TUD_MIDI2_DESC_ALT1_HEAD_LEN); +} + +void test_midi2_alt1_ep_len(void) { + // EP(7) + CS base(4) + numgtbs + TEST_ASSERT_EQUAL(12, TUD_MIDI2_DESC_ALT1_EP_LEN(1)); + TEST_ASSERT_EQUAL(13, TUD_MIDI2_DESC_ALT1_EP_LEN(2)); + TEST_ASSERT_EQUAL(18, TUD_MIDI2_DESC_ALT1_EP_LEN(7)); +} + +void test_midi2_desc_len(void) { + int expected = TUD_MIDI_DESC_LEN + TUD_MIDI2_DESC_ALT1_HEAD_LEN + TUD_MIDI2_DESC_ALT1_EP_LEN(1) * 2; + TEST_ASSERT_EQUAL(expected, TUD_MIDI2_DESC_LEN); +} + +void test_midi2_desc_len_greater_than_midi1(void) { + TEST_ASSERT_TRUE(TUD_MIDI2_DESC_LEN > TUD_MIDI_DESC_LEN); +} + +//--------------------------------------------------------------------+ +// Descriptor macro byte validation +//--------------------------------------------------------------------+ + +void test_midi2_descriptor_bytes(void) { + uint8_t desc[] = { TUD_MIDI2_DESCRIPTOR(0, 0, 0x01, 0x81, 64) }; + + TEST_ASSERT_EQUAL(TUD_MIDI2_DESC_LEN, sizeof(desc)); + + // First byte: Audio Control Interface descriptor length = 9 + TEST_ASSERT_EQUAL(9, desc[0]); + TEST_ASSERT_EQUAL(TUSB_DESC_INTERFACE, desc[1]); + TEST_ASSERT_EQUAL(0, desc[2]); + + // Find Alt Setting 1 by scanning + int alt1_offset = -1; + int pos = 0; + while (pos < (int)sizeof(desc)) { + if (desc[pos + 1] == TUSB_DESC_INTERFACE && desc[pos + 3] == 1) { + alt1_offset = pos; + break; + } + pos += desc[pos]; + } + + TEST_ASSERT_TRUE_MESSAGE(alt1_offset >= 0, "Alt Setting 1 interface not found"); + + TEST_ASSERT_EQUAL(9, desc[alt1_offset]); + TEST_ASSERT_EQUAL(TUSB_DESC_INTERFACE, desc[alt1_offset + 1]); + TEST_ASSERT_EQUAL(1, desc[alt1_offset + 2]); // bInterfaceNumber + TEST_ASSERT_EQUAL(1, desc[alt1_offset + 3]); // bAlternateSetting + TEST_ASSERT_EQUAL(2, desc[alt1_offset + 4]); // bNumEndpoints + TEST_ASSERT_EQUAL(TUSB_CLASS_AUDIO, desc[alt1_offset + 5]); + + // MS Header after Alt Setting 1 interface: bcdMSC = 0x0200 + int ms2_offset = alt1_offset + 9; + TEST_ASSERT_EQUAL(7, desc[ms2_offset]); + TEST_ASSERT_EQUAL(TUSB_DESC_CS_INTERFACE, desc[ms2_offset + 1]); + TEST_ASSERT_EQUAL(MIDI_CS_INTERFACE_HEADER, desc[ms2_offset + 2]); + TEST_ASSERT_EQUAL(0x00, desc[ms2_offset + 3]); + TEST_ASSERT_EQUAL(0x02, desc[ms2_offset + 4]); +} + +void test_midi2_descriptor_alt1_cs_endpoint_subtype(void) { + uint8_t desc[] = { TUD_MIDI2_DESCRIPTOR(0, 0, 0x01, 0x81, 64) }; + + int cs_ep_count = 0; + int pos = 0; + while (pos < (int)sizeof(desc)) { + if (desc[pos + 1] == TUSB_DESC_CS_ENDPOINT && + desc[pos + 2] == MIDI_CS_ENDPOINT_GENERAL_2_0) { + cs_ep_count++; + TEST_ASSERT_EQUAL(1, desc[pos + 3]); + } + pos += desc[pos]; + } + TEST_ASSERT_EQUAL(2, cs_ep_count); +} + +void test_midi2_descriptor_has_both_alt_settings(void) { + uint8_t desc[] = { TUD_MIDI2_DESCRIPTOR(0, 0, 0x01, 0x81, 64) }; + + int alt0_count = 0; + int alt1_count = 0; + int pos = 0; + while (pos < (int)sizeof(desc)) { + if (desc[pos + 1] == TUSB_DESC_INTERFACE) { + if (desc[pos + 3] == 0) alt0_count++; + if (desc[pos + 3] == 1) alt1_count++; + } + pos += desc[pos]; + } + TEST_ASSERT_TRUE(alt0_count >= 2); + TEST_ASSERT_EQUAL(1, alt1_count); +} + +void test_midi2_descriptor_endpoint_addresses(void) { + uint8_t desc[] = { TUD_MIDI2_DESCRIPTOR(0, 0, 0x02, 0x82, 64) }; + + int ep_out_count = 0; + int ep_in_count = 0; + int pos = 0; + while (pos < (int)sizeof(desc)) { + if (desc[pos + 1] == TUSB_DESC_ENDPOINT) { + uint8_t ep_addr = desc[pos + 2]; + if (ep_addr == 0x02) ep_out_count++; + if (ep_addr == 0x82) ep_in_count++; + TEST_ASSERT_EQUAL(TUSB_XFER_BULK, desc[pos + 3]); + TEST_ASSERT_EQUAL(64, desc[pos + 4]); + TEST_ASSERT_EQUAL(0, desc[pos + 5]); + } + pos += desc[pos]; + } + TEST_ASSERT_EQUAL(2, ep_out_count); + TEST_ASSERT_EQUAL(2, ep_in_count); +} + +void test_midi2_descriptor_nonzero_itfnum(void) { + uint8_t desc[] = { TUD_MIDI2_DESCRIPTOR(2, 0, 0x03, 0x83, 64) }; + + TEST_ASSERT_EQUAL(2, desc[2]); + + int pos = desc[0]; + while (pos < (int)sizeof(desc)) { + if (desc[pos + 1] == TUSB_DESC_INTERFACE) { + TEST_ASSERT_EQUAL(3, desc[pos + 2]); + break; + } + pos += desc[pos]; + } +} + +//--------------------------------------------------------------------+ +// Descriptor traversal integrity +//--------------------------------------------------------------------+ + +void test_midi2_descriptor_no_zero_length(void) { + uint8_t desc[] = { TUD_MIDI2_DESCRIPTOR(0, 0, 0x01, 0x81, 64) }; + + int pos = 0; + int desc_count = 0; + while (pos < (int)sizeof(desc)) { + TEST_ASSERT_TRUE_MESSAGE(desc[pos] > 0, "Zero-length descriptor found"); + TEST_ASSERT_TRUE_MESSAGE(desc[pos] <= (int)sizeof(desc) - pos, + "Descriptor length exceeds remaining bytes"); + pos += desc[pos]; + desc_count++; + } + TEST_ASSERT_EQUAL((int)sizeof(desc), pos); + TEST_ASSERT_TRUE(desc_count > 5); +} + +void test_midi2_descriptor_valid_types(void) { + uint8_t desc[] = { TUD_MIDI2_DESCRIPTOR(0, 0, 0x01, 0x81, 64) }; + + int pos = 0; + while (pos < (int)sizeof(desc)) { + uint8_t dtype = desc[pos + 1]; + bool valid = (dtype == TUSB_DESC_INTERFACE || + dtype == TUSB_DESC_ENDPOINT || + dtype == TUSB_DESC_CS_INTERFACE || + dtype == TUSB_DESC_CS_ENDPOINT); + TEST_ASSERT_TRUE_MESSAGE(valid, "Invalid descriptor type found"); + pos += desc[pos]; + } +} + +//--------------------------------------------------------------------+ +// Edge cases +//--------------------------------------------------------------------+ + +void test_ump_word_count_with_values_beyond_0xf(void) { + TEST_ASSERT_EQUAL(4, midi2_ump_word_count(0x10)); + TEST_ASSERT_EQUAL(4, midi2_ump_word_count(0xFF)); +} diff --git a/test/unit-test/test/host/midi2/test_midi2_host.c b/test/unit-test/test/host/midi2/test_midi2_host.c new file mode 100644 index 000000000..8ad77c14e --- /dev/null +++ b/test/unit-test/test/host/midi2/test_midi2_host.c @@ -0,0 +1,101 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2026 Saulo Verissimo + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "unity.h" +#include "tusb_option.h" +#include "class/midi/midi.h" +#include "class/midi/midi2_host.h" + +void setUp(void) {} +void tearDown(void) {} + +//--------------------------------------------------------------------+ +// UMP Word Count (shared helper, defined in midi.h) +//--------------------------------------------------------------------+ + +void test_midi2_host_ump_word_count_1word(void) { + uint8_t types[] = {0x0, 0x1, 0x2, 0x6, 0x7}; + for (int i = 0; i < 5; i++) { + TEST_ASSERT_EQUAL(1, midi2_ump_word_count(types[i])); + } +} + +void test_midi2_host_ump_word_count_2word(void) { + uint8_t types[] = {0x3, 0x4, 0x8, 0x9, 0xA}; + for (int i = 0; i < 5; i++) { + TEST_ASSERT_EQUAL(2, midi2_ump_word_count(types[i])); + } +} + +void test_midi2_host_ump_word_count_4word(void) { + uint8_t types[] = {0x5, 0xD, 0xE, 0xF}; + for (int i = 0; i < 4; i++) { + TEST_ASSERT_EQUAL(4, midi2_ump_word_count(types[i])); + } +} + +//--------------------------------------------------------------------+ +// Callback struct field validation +//--------------------------------------------------------------------+ + +void test_midi2_descriptor_cb_struct_fields(void) { + tuh_midi2_descriptor_cb_t desc = { + .protocol_version = 1, + .bcdMSC_hi = 0x02, + .bcdMSC_lo = 0x00, + .rx_cable_count = 1, + .tx_cable_count = 1 + }; + TEST_ASSERT_EQUAL(1, desc.protocol_version); + TEST_ASSERT_EQUAL(0x02, desc.bcdMSC_hi); + TEST_ASSERT_EQUAL(0x00, desc.bcdMSC_lo); + TEST_ASSERT_EQUAL(1, desc.rx_cable_count); + TEST_ASSERT_EQUAL(1, desc.tx_cable_count); +} + +void test_midi2_mount_cb_struct_fields(void) { + tuh_midi2_mount_cb_t mount = { + .daddr = 1, + .bInterfaceNumber = 0, + .protocol_version = 1, + .alt_setting_active = 1, + .rx_cable_count = 2, + .tx_cable_count = 2 + }; + TEST_ASSERT_EQUAL(1, mount.daddr); + TEST_ASSERT_EQUAL(0, mount.bInterfaceNumber); + TEST_ASSERT_EQUAL(1, mount.protocol_version); + TEST_ASSERT_EQUAL(1, mount.alt_setting_active); + TEST_ASSERT_EQUAL(2, mount.rx_cable_count); + TEST_ASSERT_EQUAL(2, mount.tx_cable_count); +} + +//--------------------------------------------------------------------+ +// CS Endpoint subtypes +//--------------------------------------------------------------------+ + +void test_midi2_host_cs_endpoint_subtypes(void) { + TEST_ASSERT_EQUAL(0x01, MIDI_CS_ENDPOINT_GENERAL); + TEST_ASSERT_EQUAL(0x02, MIDI_CS_ENDPOINT_GENERAL_2_0); +} -- cgit v1.3.1 From fa9edeff9c00ee1fc4ee7ab9938b1a5955a6281a Mon Sep 17 00:00:00 2001 From: Saulo Veríssimo Date: Wed, 25 Mar 2026 07:05:56 -0300 Subject: fix: address PR review feedback for MIDI 2.0 drivers Host driver (midi2_host.c): - midih2_open() now returns actual parsed length instead of max_len, preventing composite device interface conflicts - Parsers (alt0/alt1) refactored to return const uint8_t* end pointer following midi_host.c switch/case pattern - Alt 1 CS Endpoint now parses MIDI 2.0 layout (bNumGrpTrmBlk at offset 3 with MIDI_CS_ENDPOINT_GENERAL_2_0 subtype check) instead of reusing MIDI 1.0 struct (bNumEmbMIDIJack) - midih2_set_config() now issues SET_INTERFACE control request via tuh_interface_set() before completing configuration. Falls back to alt 0 if SET_INTERFACE fails - Extracted midih2_set_config_complete() and midih2_set_interface_cb() for async SET_INTERFACE handling Device driver (midi2_device.c): - midi2d_open() skip loop now checks bInterfaceNumber, stopping at interfaces that belong to other functions in composite devices - SET_INTERFACE handler now rejects alt > 1 (returns false/stall) - Named constants for GTB descriptor types and MIDI protocol values Descriptor macros (usbd.h): - TUD_MIDI2_DESC_ALT1_HEAD: iInterface set to 0 (consistent with Alt 0), wTotalLength now uses TUD_MIDI2_DESC_ALT1_CS_LEN to cover all Alt 1 class-specific descriptors - TUD_MIDI2_DESC_ALT1_EP: now accepts GTB ID list via variadic args, emitting complete CS endpoint descriptor Host example: - CMakeLists.txt restricted to rp2040 family (display.c requires Pico SDK headers) - display.c: null terminator after strncpy in log scroll Documentation: - class_drivers.rst updated to reflect SET_INTERFACE behavior and auto-select with fallback Addresses: Codex P1 (#1, #2, #3), Copilot (#4-#9) --- docs/reference/class_drivers.rst | 8 +- examples/host/midi2_host/CMakeLists.txt | 3 +- examples/host/midi2_host/src/display.c | 1 + src/class/midi/midi2_device.c | 14 ++- src/class/midi/midi2_host.c | 213 ++++++++++++++++++++------------ src/device/usbd.h | 24 ++-- 6 files changed, 166 insertions(+), 97 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/class_drivers.rst b/docs/reference/class_drivers.rst index 9ed332acb..3ac0d8d4e 100644 --- a/docs/reference/class_drivers.rst +++ b/docs/reference/class_drivers.rst @@ -87,7 +87,7 @@ The MIDI 2.0 Host driver enables TinyUSB to enumerate and communicate with USB M **Key Features:** - **Reactive Architecture**: Auto-detects Alt Setting 1 (MIDI 2.0) capability during enumeration -- **Auto-Selection**: Automatically selects the highest available protocol (MIDI 2.0 preferred) +- **Auto-Selection**: Automatically selects the highest available protocol and issues SET_INTERFACE to activate Alt Setting 1 when MIDI 2.0 is detected - **Transparent Stream Messages**: All data (UMP packets + Stream Messages) flow through callbacks - **Memory Safe**: No dynamic allocation, fixed-size instances per device @@ -271,9 +271,9 @@ Architecture The MIDI 2.0 Host driver uses a **reactive, callback-driven architecture** that mirrors the proven patterns in TinyUSB's existing device drivers (CDC, HID, etc.): - **Auto-Detection**: Host automatically detects Alt Setting 1 capability -- **Auto-Selection**: Selects highest protocol available (MIDI 2.0 preferred) -- **Application Control**: App makes protocol behavior decisions via callbacks -- **Transparent I/O**: Stream Messages and UMP packets flow transparently +- **Auto-Selection**: Selects highest protocol available and issues SET_INTERFACE +- **Transparent I/O**: Stream Messages and UMP packets flow through callbacks +- **Callback-Driven**: App receives events via callbacks (descriptor, mount, rx, tx, unmount) Differences from MIDI 1.0 Host ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/examples/host/midi2_host/CMakeLists.txt b/examples/host/midi2_host/CMakeLists.txt index 221de7adf..cd70d122a 100644 --- a/examples/host/midi2_host/CMakeLists.txt +++ b/examples/host/midi2_host/CMakeLists.txt @@ -6,7 +6,8 @@ project(midi2_host C CXX ASM) family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) -if(FAMILY STREQUAL "espressif") +# This example requires PIO-USB and Pico SDK (I2C, SSD1306 display) +if(NOT FAMILY STREQUAL "rp2040") return() endif() diff --git a/examples/host/midi2_host/src/display.c b/examples/host/midi2_host/src/display.c index 6d81bcd5c..4745c2961 100644 --- a/examples/host/midi2_host/src/display.c +++ b/examples/host/midi2_host/src/display.c @@ -190,6 +190,7 @@ void display_log(const char* text, uint16_t color) { if (log_count >= LOG_LINES) { for (int i = 0; i < LOG_LINES - 1; i++) { strncpy(log_lines[i], log_lines[i + 1], CHARS_PER_LINE); + log_lines[i][CHARS_PER_LINE] = '\0'; } log_count = LOG_LINES - 1; } diff --git a/src/class/midi/midi2_device.c b/src/class/midi/midi2_device.c index 9363aac11..aecbda4c5 100644 --- a/src/class/midi/midi2_device.c +++ b/src/class/midi/midi2_device.c @@ -505,12 +505,19 @@ uint16_t midi2d_open(uint8_t rhport, const tusb_desc_interface_t* desc_itf, uint } // Skip remaining descriptors (alt setting 1, CS endpoints, GTB) + // Stop at any interface descriptor that is not our MIDI Streaming alt setting while (tu_desc_in_bounds(p_desc, desc_end)) { uint8_t dtype = tu_desc_type(p_desc); - if (dtype != TUSB_DESC_CS_INTERFACE && dtype != TUSB_DESC_CS_ENDPOINT && - dtype != TUSB_DESC_INTERFACE && dtype != TUSB_DESC_ENDPOINT) { + + if (dtype == TUSB_DESC_INTERFACE) { + const tusb_desc_interface_t* next_itf = (const tusb_desc_interface_t*) p_desc; + // Continue only if this is an alternate setting of our own interface + if (next_itf->bInterfaceNumber != desc_midi->bInterfaceNumber) break; + } else if (dtype != TUSB_DESC_CS_INTERFACE && dtype != TUSB_DESC_CS_ENDPOINT && + dtype != TUSB_DESC_ENDPOINT) { break; } + p_desc = tu_desc_next(p_desc); } @@ -528,6 +535,9 @@ bool midi2d_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_re uint8_t itf_num = tu_u16_low(request->wIndex); uint8_t alt = tu_u16_low(request->wValue); + // Only Alt Setting 0 (MIDI 1.0) and 1 (UMP) are valid + if (alt > 1) return false; + uint8_t idx = find_midi2_itf_by_num(itf_num); if (idx >= CFG_TUD_MIDI2) return false; diff --git a/src/class/midi/midi2_host.c b/src/class/midi/midi2_host.c index beb441b56..5b9f98f8b 100644 --- a/src/class/midi/midi2_host.c +++ b/src/class/midi/midi2_host.c @@ -125,9 +125,10 @@ static inline uint8_t get_idx_by_ep_addr(uint8_t daddr, uint8_t ep_addr) { // Descriptor parsing //--------------------------------------------------------------------+ -static void midih2_parse_descriptors_alt0(midih2_interface_t *p_midi, +// Parse Alt Setting 0 (MIDI 1.0) descriptors. Returns pointer past last consumed descriptor. +static const uint8_t* midih2_parse_descriptors_alt0(midih2_interface_t *p_midi, const tusb_desc_interface_t *desc_itf, const uint8_t *desc_end) { - TU_VERIFY(AUDIO_SUBCLASS_MIDI_STREAMING == desc_itf->bInterfaceSubClass,); + TU_VERIFY(AUDIO_SUBCLASS_MIDI_STREAMING == desc_itf->bInterfaceSubClass, NULL); p_midi->bInterfaceNumber = desc_itf->bInterfaceNumber; @@ -136,93 +137,113 @@ static void midih2_parse_descriptors_alt0(midih2_interface_t *p_midi, uint8_t rx_cable_count = 0; uint8_t tx_cable_count = 0; + bool found_new_interface = false; - while (tu_desc_in_bounds(p_desc, desc_end)) { - if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) { - break; - } - - if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { - const tusb_desc_endpoint_t *p_ep = (const tusb_desc_endpoint_t *) p_desc; - - // Open endpoint and stream - TU_ASSERT(tuh_edpt_open(p_midi->daddr, p_ep),); - if (tu_edpt_dir(p_ep->bEndpointAddress) == TUSB_DIR_IN) { - tu_edpt_stream_open(&p_midi->ep_stream.rx, p_midi->daddr, p_ep, tu_edpt_packet_size(p_ep)); - tu_edpt_stream_clear(&p_midi->ep_stream.rx); - } else { - tu_edpt_stream_open(&p_midi->ep_stream.tx, p_midi->daddr, p_ep, tu_edpt_packet_size(p_ep)); - tu_edpt_stream_clear(&p_midi->ep_stream.tx); - } - - p_desc = tu_desc_next(p_desc); + while (tu_desc_in_bounds(p_desc, desc_end) && !found_new_interface) { + switch (tu_desc_type(p_desc)) { + case TUSB_DESC_INTERFACE: + found_new_interface = true; + break; - if (tu_desc_in_bounds(p_desc, desc_end) && tu_desc_type(p_desc) == TUSB_DESC_CS_ENDPOINT) { - const midi_desc_cs_endpoint_t *p_csep = (const midi_desc_cs_endpoint_t *) p_desc; + case TUSB_DESC_ENDPOINT: { + const tusb_desc_endpoint_t *p_ep = (const tusb_desc_endpoint_t *) p_desc; - if (tu_edpt_dir(p_ep->bEndpointAddress) == TUSB_DIR_OUT) { - tx_cable_count = p_csep->bNumEmbMIDIJack; + TU_ASSERT(tuh_edpt_open(p_midi->daddr, p_ep), NULL); + if (tu_edpt_dir(p_ep->bEndpointAddress) == TUSB_DIR_IN) { + tu_edpt_stream_open(&p_midi->ep_stream.rx, p_midi->daddr, p_ep, tu_edpt_packet_size(p_ep)); + tu_edpt_stream_clear(&p_midi->ep_stream.rx); } else { - rx_cable_count = p_csep->bNumEmbMIDIJack; + tu_edpt_stream_open(&p_midi->ep_stream.tx, p_midi->daddr, p_ep, tu_edpt_packet_size(p_ep)); + tu_edpt_stream_clear(&p_midi->ep_stream.tx); + } + + p_desc = tu_desc_next(p_desc); + if (tu_desc_in_bounds(p_desc, desc_end) && tu_desc_type(p_desc) == TUSB_DESC_CS_ENDPOINT) { + const midi_desc_cs_endpoint_t *p_csep = (const midi_desc_cs_endpoint_t *) p_desc; + if (tu_edpt_dir(p_ep->bEndpointAddress) == TUSB_DIR_OUT) { + tx_cable_count = p_csep->bNumEmbMIDIJack; + } else { + rx_cable_count = p_csep->bNumEmbMIDIJack; + } } + break; } + + default: + break; } - p_desc = tu_desc_next(p_desc); + if (!found_new_interface) { + p_desc = tu_desc_next(p_desc); + } } p_midi->rx_cable_count_alt0 = rx_cable_count; p_midi->tx_cable_count_alt0 = tx_cable_count; + return p_desc; } -static void midih2_parse_descriptors_alt1(midih2_interface_t *p_midi, +// Parse Alt Setting 1 (MIDI 2.0 UMP) descriptors. Returns pointer past last consumed descriptor. +static const uint8_t* midih2_parse_descriptors_alt1(midih2_interface_t *p_midi, const tusb_desc_interface_t *desc_itf, const uint8_t *desc_end) { - TU_VERIFY(AUDIO_SUBCLASS_MIDI_STREAMING == desc_itf->bInterfaceSubClass,); - TU_VERIFY(desc_itf->bAlternateSetting == 1,); + TU_VERIFY(AUDIO_SUBCLASS_MIDI_STREAMING == desc_itf->bInterfaceSubClass, NULL); + TU_VERIFY(desc_itf->bAlternateSetting == 1, NULL); const uint8_t *p_desc = (const uint8_t *) desc_itf; p_desc = tu_desc_next(p_desc); uint8_t rx_cable_count = 0; uint8_t tx_cable_count = 0; + bool found_new_interface = false; - while (tu_desc_in_bounds(p_desc, desc_end)) { - if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) { - break; - } + while (tu_desc_in_bounds(p_desc, desc_end) && !found_new_interface) { + switch (tu_desc_type(p_desc)) { + case TUSB_DESC_INTERFACE: + found_new_interface = true; + break; - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE) { - if (tu_desc_subtype(p_desc) == MIDI_CS_INTERFACE_HEADER) { - const uint8_t *bcd_ptr = p_desc + 3; - p_midi->bcdMSC_lo = bcd_ptr[0]; - p_midi->bcdMSC_hi = bcd_ptr[1]; + case TUSB_DESC_CS_INTERFACE: + if (tu_desc_subtype(p_desc) == MIDI_CS_INTERFACE_HEADER) { + // bcdMSC at offset 3-4 in CS Interface Header + const uint8_t *bcd_ptr = p_desc + 3; + p_midi->bcdMSC_lo = bcd_ptr[0]; + p_midi->bcdMSC_hi = bcd_ptr[1]; + if (p_midi->bcdMSC_hi == 0x02) { // bcdMSC 0x0200 = USB-MIDI 2.0 + p_midi->protocol_version = 1; + } + } + break; - if (p_midi->bcdMSC_hi == 0x02) { - p_midi->protocol_version = 1; + case TUSB_DESC_ENDPOINT: { + const tusb_desc_endpoint_t *p_ep = (const tusb_desc_endpoint_t *) p_desc; + p_desc = tu_desc_next(p_desc); + + if (tu_desc_in_bounds(p_desc, desc_end) && tu_desc_type(p_desc) == TUSB_DESC_CS_ENDPOINT) { + // MIDI 2.0 CS Endpoint General 2.0: bNumGrpTrmBlk at offset 3 + if (p_desc[0] >= 4 && p_desc[2] == MIDI_CS_ENDPOINT_GENERAL_2_0) { + uint8_t num_grp_trm_blk = p_desc[3]; + if (tu_edpt_dir(p_ep->bEndpointAddress) == TUSB_DIR_OUT) { + tx_cable_count = num_grp_trm_blk; + } else { + rx_cable_count = num_grp_trm_blk; + } + } } + break; } + + default: + break; } - if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { - const tusb_desc_endpoint_t *p_ep = (const tusb_desc_endpoint_t *) p_desc; + if (!found_new_interface) { p_desc = tu_desc_next(p_desc); - - if (tu_desc_in_bounds(p_desc, desc_end) && tu_desc_type(p_desc) == TUSB_DESC_CS_ENDPOINT) { - const midi_desc_cs_endpoint_t *p_csep = (const midi_desc_cs_endpoint_t *) p_desc; - - if (tu_edpt_dir(p_ep->bEndpointAddress) == TUSB_DIR_OUT) { - tx_cable_count = p_csep->bNumEmbMIDIJack; - } else { - rx_cable_count = p_csep->bNumEmbMIDIJack; - } - } } - - p_desc = tu_desc_next(p_desc); } p_midi->rx_cable_count_alt1 = rx_cable_count; p_midi->tx_cable_count_alt1 = tx_cable_count; + return p_desc; } //--------------------------------------------------------------------+ @@ -327,33 +348,20 @@ uint16_t midih2_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_interface desc_itf->bInterfaceNumber, desc_itf->bAlternateSetting, dev_addr); // Dispatch to appropriate parser based on Alt Setting + const uint8_t *p_end = NULL; if (desc_itf->bAlternateSetting == 0) { - midih2_parse_descriptors_alt0(p_midi, desc_itf, desc_end); + p_end = midih2_parse_descriptors_alt0(p_midi, desc_itf, desc_end); } else if (desc_itf->bAlternateSetting == 1) { - midih2_parse_descriptors_alt1(p_midi, desc_itf, desc_end); + p_end = midih2_parse_descriptors_alt1(p_midi, desc_itf, desc_end); } - return max_len; + // Return number of bytes consumed (following midi_host.c pattern) + uint16_t const parsed_len = (p_end != NULL) ? (uint16_t)(p_end - desc_start) : 0; + return parsed_len; } -bool midih2_set_config(uint8_t dev_addr, uint8_t itf_num) { - uint8_t idx = 0; - for (idx = 0; idx < CFG_TUH_MIDI2; idx++) { - if (_midi2_host[idx].daddr == dev_addr && _midi2_host[idx].bInterfaceNumber == itf_num) { - break; - } - } - - if (idx >= CFG_TUH_MIDI2) { - // Not our interface (e.g. Audio Control) - pass through to next - usbh_driver_set_config_complete(dev_addr, itf_num); - return true; - } - - midih2_interface_t *p_midi = &_midi2_host[idx]; - - // Auto-select alt setting - midih2_auto_select_alt_setting(p_midi); +static void midih2_set_config_complete(midih2_interface_t *p_midi, uint8_t idx) { + uint8_t dev_addr = p_midi->daddr; // Invoke descriptor_cb tuh_midi2_descriptor_cb_t desc_cb = { @@ -374,7 +382,7 @@ bool midih2_set_config(uint8_t dev_addr, uint8_t itf_num) { // Invoke mount_cb tuh_midi2_mount_cb_t mount_cb = { - .daddr = p_midi->daddr, + .daddr = dev_addr, .bInterfaceNumber = p_midi->bInterfaceNumber, .protocol_version = p_midi->protocol_version, .alt_setting_active = p_midi->alt_setting_current, @@ -387,7 +395,56 @@ bool midih2_set_config(uint8_t dev_addr, uint8_t itf_num) { tu_edpt_stream_read_xfer(&p_midi->ep_stream.rx); // Signal USBH that configuration is complete - usbh_driver_set_config_complete(dev_addr, itf_num); + usbh_driver_set_config_complete(dev_addr, p_midi->bInterfaceNumber); +} + +static void midih2_set_interface_cb(tuh_xfer_t *xfer) { + uint8_t const dev_addr = xfer->daddr; + uint8_t const itf_num = (uint8_t) tu_le16toh(xfer->setup->wIndex); + + // Find our interface + for (uint8_t idx = 0; idx < CFG_TUH_MIDI2; idx++) { + if (_midi2_host[idx].daddr == dev_addr && _midi2_host[idx].bInterfaceNumber == itf_num) { + if (xfer->result == XFER_RESULT_SUCCESS) { + midih2_set_config_complete(&_midi2_host[idx], idx); + } else { + // SET_INTERFACE failed, fall back to alt 0 + TU_LOG_DRV("MIDI2 SET_INTERFACE failed, falling back to alt 0\r\n"); + _midi2_host[idx].alt_setting_current = 0; + midih2_set_config_complete(&_midi2_host[idx], idx); + } + return; + } + } +} + +bool midih2_set_config(uint8_t dev_addr, uint8_t itf_num) { + uint8_t idx = 0; + for (idx = 0; idx < CFG_TUH_MIDI2; idx++) { + if (_midi2_host[idx].daddr == dev_addr && _midi2_host[idx].bInterfaceNumber == itf_num) { + break; + } + } + + if (idx >= CFG_TUH_MIDI2) { + // Not our interface (e.g. Audio Control) - pass through to next + usbh_driver_set_config_complete(dev_addr, itf_num); + return true; + } + + midih2_interface_t *p_midi = &_midi2_host[idx]; + + // Auto-select alt setting + midih2_auto_select_alt_setting(p_midi); + + // If MIDI 2.0 detected, issue SET_INTERFACE to activate Alt Setting 1 + if (p_midi->alt_setting_current == 1) { + TU_LOG_DRV("MIDI2 requesting SET_INTERFACE alt 1 for itf %u\r\n", itf_num); + TU_ASSERT(tuh_interface_set(dev_addr, itf_num, 1, midih2_set_interface_cb, 0)); + } else { + // MIDI 1.0 only, complete immediately + midih2_set_config_complete(p_midi, idx); + } return true; } diff --git a/src/device/usbd.h b/src/device/usbd.h index af37eff56..a9f4c5f08 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -429,18 +429,20 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ //--------------------------------------------------------------------+ // Alt Setting 1: MS Interface + MS Header (bcdMSC=0x0200) +// wTotalLength covers MS Header + all CS Endpoint descriptors +#define TUD_MIDI2_DESC_ALT1_CS_LEN(_numgtbs) (7 + (4 + (_numgtbs)) * 2) #define TUD_MIDI2_DESC_ALT1_HEAD_LEN (9 + 7) -#define TUD_MIDI2_DESC_ALT1_HEAD(_itfnum, _stridx) \ +#define TUD_MIDI2_DESC_ALT1_HEAD(_itfnum, _stridx, _numgtbs) \ /* MIDI Streaming Interface, Alt Setting 1 */\ - 9, TUSB_DESC_INTERFACE, (uint8_t)((_itfnum) + 1), 1, 2, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_MIDI_STREAMING, AUDIO_FUNC_PROTOCOL_CODE_UNDEF, _stridx,\ - /* MS Header (MIDI 2.0) */\ - 7, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_HEADER, U16_TO_U8S_LE(0x0200), U16_TO_U8S_LE(7) + 9, TUSB_DESC_INTERFACE, (uint8_t)((_itfnum) + 1), 1, 2, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_MIDI_STREAMING, AUDIO_FUNC_PROTOCOL_CODE_UNDEF, 0,\ + /* MS Header (MIDI 2.0): wTotalLength = header + 2x CS Endpoint */\ + 7, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_HEADER, U16_TO_U8S_LE(0x0200), U16_TO_U8S_LE(TUD_MIDI2_DESC_ALT1_CS_LEN(_numgtbs)) -// Alt Setting 1: Standard USB Endpoint (7 bytes) + CS Endpoint (subtype 0x02) +// Alt Setting 1: Standard USB Endpoint (7 bytes) + CS Endpoint General 2.0 #define TUD_MIDI2_DESC_ALT1_EP_LEN(_numgtbs) (7 + 4 + (_numgtbs)) -#define TUD_MIDI2_DESC_ALT1_EP(_ep, _epsize, _numgtbs) \ +#define TUD_MIDI2_DESC_ALT1_EP(_ep, _epsize, _numgtbs, ...) \ 7, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_BULK, U16_TO_U8S_LE(_epsize), 0, \ - (uint8_t)(4 + (_numgtbs)), TUSB_DESC_CS_ENDPOINT, MIDI_CS_ENDPOINT_GENERAL_2_0, _numgtbs + (uint8_t)(4 + (_numgtbs)), TUSB_DESC_CS_ENDPOINT, MIDI_CS_ENDPOINT_GENERAL_2_0, _numgtbs, ## __VA_ARGS__ // Total length: Alt 0 (MIDI 1.0) + Alt 1 (UMP) #define TUD_MIDI2_DESC_LEN (TUD_MIDI_DESC_LEN + TUD_MIDI2_DESC_ALT1_HEAD_LEN + TUD_MIDI2_DESC_ALT1_EP_LEN(1) * 2) @@ -455,11 +457,9 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ TUD_MIDI_DESC_EP(_epin, _epsize, 1),\ TUD_MIDI_JACKID_OUT_EMB(1),\ /* Alt Setting 1 (UMP) */\ - TUD_MIDI2_DESC_ALT1_HEAD(_itfnum, _stridx),\ - TUD_MIDI2_DESC_ALT1_EP(_epout, _epsize, 1),\ - 1, /* bAssoGrpTrmBlkID = 1 */\ - TUD_MIDI2_DESC_ALT1_EP(_epin, _epsize, 1),\ - 1 /* bAssoGrpTrmBlkID = 1 */ + TUD_MIDI2_DESC_ALT1_HEAD(_itfnum, _stridx, 1),\ + TUD_MIDI2_DESC_ALT1_EP(_epout, _epsize, 1, 1 /* bAssoGrpTrmBlkID */),\ + TUD_MIDI2_DESC_ALT1_EP(_epin, _epsize, 1, 1 /* bAssoGrpTrmBlkID */) //--------------------------------------------------------------------+ // Audio Descriptor Templates -- cgit v1.3.1 From 4baf1883c194c2c4b6fa30cc0c443ad6c83e0b19 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 18 May 2026 23:07:49 +0200 Subject: midi2: convert to raw Tx FIFO for better segmentation handling, add count to packet api Signed-off-by: HiFiPhile --- docs/reference/class_drivers.rst | 4 +- src/class/midi/midi2_device.c | 276 +++++++++++++++++++++++---------------- src/class/midi/midi2_device.h | 14 +- 3 files changed, 176 insertions(+), 118 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/class_drivers.rst b/docs/reference/class_drivers.rst index 3ac0d8d4e..4a101fabc 100644 --- a/docs/reference/class_drivers.rst +++ b/docs/reference/class_drivers.rst @@ -64,8 +64,8 @@ I/O Functions uint32_t tud_midi2_ump_read(uint32_t* words, uint32_t max_words); uint32_t tud_midi2_ump_write(const uint32_t* words, uint32_t count); - bool tud_midi2_packet_read(uint8_t packet[4]); - bool tud_midi2_packet_write(const uint8_t packet[4]); + uint32_t tud_midi2_packet_read(uint8_t packets[], uint32_t max_packets); + uint32_t tud_midi2_packet_write(const uint8_t packets[], uint32_t count); Callbacks ^^^^^^^^^ diff --git a/src/class/midi/midi2_device.c b/src/class/midi/midi2_device.c index c61884689..b14f439f8 100644 --- a/src/class/midi/midi2_device.c +++ b/src/class/midi/midi2_device.c @@ -100,6 +100,16 @@ enum { //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ +typedef struct { + uint8_t ep_addr; + uint16_t mps; + tu_fifo_t ff; + +#if CFG_TUD_EDPT_DEDICATED_HWFIFO == 0 + uint8_t* ep_buf; +#endif +} midi2d_tx_t; + typedef struct { uint8_t rhport; uint8_t itf_num; @@ -109,7 +119,7 @@ typedef struct { /*------------- From this point, data is not cleared by bus reset -------------*/ struct { - tu_edpt_stream_t tx; + midi2d_tx_t tx; tu_edpt_stream_t rx; uint8_t rx_ff_buf[CFG_TUD_MIDI2_RX_BUFSIZE]; @@ -117,19 +127,6 @@ typedef struct { } ep_stream; } midi2d_interface_t; -TU_VERIFY_STATIC(CFG_TUD_MIDI2_NUM_GROUPS >= 1 && CFG_TUD_MIDI2_NUM_GROUPS <= 16, - "CFG_TUD_MIDI2_NUM_GROUPS must be 1..16"); -TU_VERIFY_STATIC(CFG_TUD_MIDI2_NUM_FUNCTION_BLOCKS >= 1 && CFG_TUD_MIDI2_NUM_FUNCTION_BLOCKS <= 32, - "CFG_TUD_MIDI2_NUM_FUNCTION_BLOCKS must be 1..32"); - -#define ITF_MEM_RESET_SIZE offsetof(midi2d_interface_t, ep_stream) - -static midi2d_interface_t _midi2d_itf[CFG_TUD_MIDI2]; - -static inline uint8_t _itf_idx(const midi2d_interface_t* p_midi) { - return (uint8_t)(p_midi - _midi2d_itf); -} - // Skip local EP buffer if dedicated hw FIFO is supported #if CFG_TUD_EDPT_DEDICATED_HWFIFO == 0 typedef struct { @@ -140,6 +137,15 @@ typedef struct { CFG_TUD_MEM_SECTION static midi2d_epbuf_t _midi2d_epbuf[CFG_TUD_MIDI2]; #endif +TU_VERIFY_STATIC(CFG_TUD_MIDI2_NUM_GROUPS >= 1 && CFG_TUD_MIDI2_NUM_GROUPS <= 16, + "CFG_TUD_MIDI2_NUM_GROUPS must be 1..16"); +TU_VERIFY_STATIC(CFG_TUD_MIDI2_NUM_FUNCTION_BLOCKS >= 1 && CFG_TUD_MIDI2_NUM_FUNCTION_BLOCKS <= 32, + "CFG_TUD_MIDI2_NUM_FUNCTION_BLOCKS must be 1..32"); + +#define ITF_MEM_RESET_SIZE offsetof(midi2d_interface_t, ep_stream) + +static midi2d_interface_t _midi2d_itf[CFG_TUD_MIDI2]; + // Default Group Terminal Block descriptor (USB-MIDI 2.0 spec, Table 5-5/5-6) static const uint8_t _default_gtb_desc[] = { // GTB Header (5 bytes) @@ -162,15 +168,112 @@ static const uint8_t _default_gtb_desc[] = { 0, 0 // wMaxOutputBandwidth: unknown }; +//--------------------------------------------------------------------+ +// Common utility functions +//--------------------------------------------------------------------+ + +static inline uint8_t _itf_idx(const midi2d_interface_t* p_midi) { + return (uint8_t)(p_midi - _midi2d_itf); +} + +static inline bool _tx_opened(const midi2d_interface_t* p_midi) { + return p_midi->ep_stream.tx.ep_addr != 0; +} + +static uint8_t _tx_byte_at(const tu_fifo_buffer_info_t* info, uint16_t offset) { + if (offset < info->linear.len) { + return info->linear.ptr[offset]; + } + + offset = (uint16_t) (offset - info->linear.len); + if (offset < info->wrapped.len) { + return info->wrapped.ptr[offset]; + } + + return 0; +} + +// Calculate the largest byte count that contains only whole UMP packets and +// fits in one USB transfer (<= mps). +static uint16_t _tx_nonseg_len_to_mps(midi2d_tx_t* tx) { + tu_fifo_buffer_info_t info; + tu_fifo_get_read_info(&tx->ff, &info); + + const uint16_t available = (uint16_t) (info.linear.len + info.wrapped.len); + uint16_t bytes = 0; + + while (bytes < tx->mps) { + if ((uint16_t) (available - bytes) < 4) break; + + uint8_t mt = (uint8_t)((_tx_byte_at(&info, (uint16_t) (bytes + 3)) >> 4) & 0x0F); + uint8_t pkt_words = midi2_ump_word_count(mt); + uint16_t pkt_bytes = (uint16_t) pkt_words * 4; + + if (pkt_bytes == 0) break; + if ((uint16_t) (available - bytes) < pkt_bytes) break; + if ((uint16_t) (bytes + pkt_bytes) > tx->mps) break; + + bytes = (uint16_t) (bytes + pkt_bytes); + } + + return bytes; +} + +// Start one IN transfer capped at mps, return number of bytes queued to the controller, or 0 if nothing was queued. +static uint16_t _tx_start_xfer(midi2d_interface_t* p_midi) { + midi2d_tx_t* tx = &p_midi->ep_stream.tx; + uint16_t ff_count = tu_fifo_count(&tx->ff); + + if (ff_count == 0) return 0; + + if (!usbd_edpt_claim(p_midi->rhport, tx->ep_addr)) return 0; + + uint16_t bytes; + if (p_midi->alt_setting == 1) { + bytes = _tx_nonseg_len_to_mps(tx); + } else { + bytes = tu_min16(tu_fifo_count(&tx->ff), tx->mps); + } + if (bytes == 0) { + usbd_edpt_release(p_midi->rhport, tx->ep_addr); + return 0; + } + +#if CFG_TUD_EDPT_DEDICATED_HWFIFO + TU_ASSERT(usbd_edpt_xfer_fifo(p_midi->rhport, tx->ep_addr, &tx->ff, bytes, false), 0); +#else + tu_fifo_read_n(&tx->ff, tx->ep_buf, bytes); + TU_ASSERT(usbd_edpt_xfer(p_midi->rhport, tx->ep_addr, tx->ep_buf, bytes, false), 0); +#endif + + return bytes; +} + +static uint32_t _tx_ump_write(midi2d_interface_t* p_midi, const uint32_t* words, uint32_t count) { + uint32_t written = 0; + while (written < count) { + uint8_t mt = (uint8_t)((words[written] >> 28) & 0x0F); + uint8_t pkt_words = midi2_ump_word_count(mt); + uint16_t pkt_bytes = (uint16_t) pkt_words * 4; + + if (written + pkt_words > count) break; + if (tu_fifo_remaining(&p_midi->ep_stream.tx.ff) < pkt_bytes) break; + + if (tu_fifo_write_n(&p_midi->ep_stream.tx.ff, &words[written], pkt_bytes) != pkt_bytes) break; + written += pkt_words; + } + + (void) _tx_start_xfer(p_midi); + return written; +} + //--------------------------------------------------------------------+ // Protocol Negotiation //--------------------------------------------------------------------+ static void _nego_send_ump(midi2d_interface_t* p_midi, const uint32_t* words, uint8_t count) { - tu_edpt_stream_t* ep_tx = &p_midi->ep_stream.tx; - if (!tu_edpt_stream_is_opened(ep_tx)) return; - if (tu_edpt_stream_write_available(ep_tx) < count * 4) return; - tu_edpt_stream_write(ep_tx, words, count * 4); - tu_edpt_stream_write_xfer(ep_tx); + if (!_tx_opened(p_midi)) return; + if (tu_fifo_remaining(&p_midi->ep_stream.tx.ff) < (uint32_t) count * 4) return; + (void) _tx_ump_write(p_midi, words, count); } static void _nego_send_endpoint_info(midi2d_interface_t* p_midi) { @@ -307,7 +410,7 @@ static void _nego_process_rx(midi2d_interface_t* p_midi) { bool tud_midi2_n_mounted(uint8_t itf) { TU_VERIFY(itf < CFG_TUD_MIDI2, false); midi2d_interface_t* p_midi = &_midi2d_itf[itf]; - return tu_edpt_stream_is_opened(&p_midi->ep_stream.tx) && + return _tx_opened(p_midi) && tu_edpt_stream_is_opened(&p_midi->ep_stream.rx); } @@ -346,10 +449,10 @@ uint32_t tud_midi2_n_ump_read(uint8_t itf, uint32_t* words, uint32_t max_words) return total_read; } -bool tud_midi2_n_packet_read(uint8_t itf, uint8_t packet[4]) { - TU_VERIFY(itf < CFG_TUD_MIDI2, false); +uint32_t tud_midi2_n_packet_read(uint8_t itf, uint8_t packets[], uint32_t max_packets) { + TU_VERIFY(itf < CFG_TUD_MIDI2 && packets != NULL && max_packets > 0, 0); midi2d_interface_t* p_midi = &_midi2d_itf[itf]; - return 4 == tu_edpt_stream_read(&p_midi->ep_stream.rx, packet, 4); + return tu_edpt_stream_read(&p_midi->ep_stream.rx, packets, max_packets * 4u) >> 2u; } //--------------------------------------------------------------------+ @@ -362,44 +465,31 @@ uint32_t tud_midi2_n_ump_write(uint8_t itf, const uint32_t* words, uint32_t coun // UMP API is only valid on Alt Setting 1 (USB-MIDI 2.0). // Alt 0 carries USB-MIDI 1.0 32-bit Event Packets, not UMP words. if (p_midi->alt_setting != 1) { return 0; } + TU_VERIFY(_tx_opened(p_midi), 0); - tu_edpt_stream_t* ep_tx = &p_midi->ep_stream.tx; - TU_VERIFY(tu_edpt_stream_is_opened(ep_tx), 0); + return _tx_ump_write(p_midi, words, count); +} + +uint32_t tud_midi2_n_packet_write(uint8_t itf, const uint8_t packets[], uint32_t count) { + TU_VERIFY(itf < CFG_TUD_MIDI2 && packets != NULL && count > 0, 0); + midi2d_interface_t* p_midi = &_midi2d_itf[itf]; + midi2d_tx_t* tx = &p_midi->ep_stream.tx; + + // Packet API is for Alt Setting 0 (USB-MIDI 1.0) event packets. + TU_VERIFY(p_midi->alt_setting == 0, 0); + TU_VERIFY(_tx_opened(p_midi), 0); uint32_t written = 0; while (written < count) { - uint8_t mt = (uint8_t)((words[written] >> 28) & 0x0F); - uint8_t pkt_words = midi2_ump_word_count(mt); - uint32_t pkt_bytes = (uint32_t)pkt_words * 4; + if (tu_fifo_remaining(&tx->ff) < 4) break; - if (written + pkt_words > count) break; - if (tu_edpt_stream_write_available(ep_tx) < pkt_bytes) break; - - // Flush whole packets already queued before adding one that would cross - // the wMaxPacketSize boundary. Prevents an UMP message from being split - // across two USB transfers, which would corrupt the host RX context. - uint16_t ff_count = tu_fifo_count(&ep_tx->ff); - if (ff_count > 0 && ff_count + pkt_bytes > ep_tx->mps) { - tu_edpt_stream_write_xfer(ep_tx); - } - - tu_edpt_stream_write(ep_tx, &words[written], pkt_bytes); - written += pkt_words; + if (tu_fifo_write_n(&tx->ff, packets + written * 4u, 4) != 4) break; + written++; } - (void) tu_edpt_stream_write_xfer(ep_tx); - return written; -} + (void) _tx_start_xfer(p_midi); -bool tud_midi2_n_packet_write(uint8_t itf, const uint8_t packet[4]) { - TU_VERIFY(itf < CFG_TUD_MIDI2, false); - midi2d_interface_t* p_midi = &_midi2d_itf[itf]; - tu_edpt_stream_t* ep_tx = &p_midi->ep_stream.tx; - TU_VERIFY(tu_edpt_stream_is_opened(ep_tx), false); - TU_VERIFY(tu_edpt_stream_write_available(ep_tx) >= 4, false); - TU_VERIFY(tu_edpt_stream_write(ep_tx, packet, 4) > 0, false); - (void) tu_edpt_stream_write_xfer(ep_tx); - return true; + return written; } //--------------------------------------------------------------------+ @@ -439,8 +529,14 @@ void midi2d_init(void) { tu_edpt_stream_init(&p_midi->ep_stream.rx, false, false, false, p_midi->ep_stream.rx_ff_buf, CFG_TUD_MIDI2_RX_BUFSIZE, epout_buf); - tu_edpt_stream_init(&p_midi->ep_stream.tx, false, true, false, - p_midi->ep_stream.tx_ff_buf, CFG_TUD_MIDI2_TX_BUFSIZE, epin_buf); + + midi2d_tx_t* tx = &p_midi->ep_stream.tx; + (void) tu_fifo_config(&tx->ff, p_midi->ep_stream.tx_ff_buf, CFG_TUD_MIDI2_TX_BUFSIZE, false); +#if CFG_TUD_EDPT_DEDICATED_HWFIFO == 0 + tx->ep_buf = epin_buf; +#else + (void) epin_buf; +#endif } } @@ -448,7 +544,6 @@ bool midi2d_deinit(void) { for (uint8_t i = 0; i < CFG_TUD_MIDI2; i++) { midi2d_interface_t* p_midi = &_midi2d_itf[i]; tu_edpt_stream_deinit(&p_midi->ep_stream.rx); - tu_edpt_stream_deinit(&p_midi->ep_stream.tx); } return true; } @@ -462,8 +557,8 @@ void midi2d_reset(uint8_t rhport) { tu_edpt_stream_clear(&p_midi->ep_stream.rx); tu_edpt_stream_close(&p_midi->ep_stream.rx); - tu_edpt_stream_clear(&p_midi->ep_stream.tx); - tu_edpt_stream_close(&p_midi->ep_stream.tx); + tu_fifo_clear(&p_midi->ep_stream.tx.ff); + p_midi->ep_stream.tx.ep_addr = 0; } } @@ -533,8 +628,9 @@ uint16_t midi2d_open(uint8_t rhport, const tusb_desc_interface_t* desc_itf, uint const uint8_t ep_addr = desc_ep->bEndpointAddress; if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { - tu_edpt_stream_open(&p_midi->ep_stream.tx, rhport, desc_ep, CFG_TUD_MIDI2_TX_EPSIZE); - tu_edpt_stream_clear(&p_midi->ep_stream.tx); + p_midi->ep_stream.tx.ep_addr = ep_addr; + p_midi->ep_stream.tx.mps = tu_edpt_packet_size(desc_ep); + tu_fifo_clear(&p_midi->ep_stream.tx.ff); } else { tu_edpt_stream_open(&p_midi->ep_stream.rx, rhport, desc_ep, tu_edpt_packet_size(desc_ep)); tu_edpt_stream_clear(&p_midi->ep_stream.rx); @@ -588,7 +684,7 @@ bool midi2d_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_re p_midi->alt_setting = alt; tu_edpt_stream_clear(&p_midi->ep_stream.rx); - tu_edpt_stream_clear(&p_midi->ep_stream.tx); + tu_fifo_clear(&p_midi->ep_stream.tx.ff); if (alt == 1) { p_midi->negotiated = false; @@ -635,53 +731,6 @@ bool midi2d_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_re } } -// Drain whole UMP packets from the TX FIFO into the EP buffer, capped at -// wMaxPacketSize. Needed when CFG_TUD_MIDI2_TX_BUFSIZE > mps: the FIFO can -// then hold more bytes than fit in a single USB transfer, and a blind -// tu_edpt_stream_write_xfer would split a UMP across two transfers. -static void midi2d_flush_tx_boundary_aware(midi2d_interface_t* p_midi, uint32_t last_xferred) { - tu_edpt_stream_t* ep_tx = &p_midi->ep_stream.tx; - const uint16_t mps = ep_tx->mps; - const uint16_t ff_count = tu_fifo_count(&ep_tx->ff); - - if (ff_count == 0) { - (void) tu_edpt_stream_write_zlp_if_needed(ep_tx, last_xferred); - return; - } - if (ff_count <= mps) { - // Whole FIFO fits in one transfer; the stream API drain is safe. - (void) tu_edpt_stream_write_xfer(ep_tx); - return; - } - if (ep_tx->ep_buf == NULL) { - // HWFIFO mode: relies on CFG_TUD_MIDI2_TX_BUFSIZE <= mps for UMP integrity. - (void) tu_edpt_stream_write_xfer(ep_tx); - return; - } - - // ff_count > mps and a local EP buffer is available: drain only whole UMP - // packets up to mps to preserve packet boundaries on the USB wire. - uint8_t word_bytes[4]; - uint8_t* buf = ep_tx->ep_buf; - uint16_t bytes = 0; - while (bytes < mps) { - if (tu_fifo_count(&ep_tx->ff) < 4) break; - if (4 != tu_fifo_peek_n(&ep_tx->ff, word_bytes, 4)) break; - uint8_t mt = (uint8_t)((word_bytes[3] >> 4) & 0x0F); - uint8_t pkt_words = midi2_ump_word_count(mt); - uint16_t pkt_bytes = (uint16_t)(pkt_words * 4); - if (tu_fifo_count(&ep_tx->ff) < pkt_bytes) break; - if (bytes + pkt_bytes > mps) break; - tu_fifo_read_n(&ep_tx->ff, buf + bytes, pkt_bytes); - bytes = (uint16_t)(bytes + pkt_bytes); - } - if (bytes == 0) return; - if (!usbd_edpt_claim(p_midi->rhport, ep_tx->ep_addr)) return; - if (!usbd_edpt_xfer(p_midi->rhport, ep_tx->ep_addr, buf, bytes, false)) { - usbd_edpt_release(p_midi->rhport, ep_tx->ep_addr); - } -} - bool midi2d_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) rhport; @@ -690,7 +739,7 @@ bool midi2d_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 midi2d_interface_t* p_midi = &_midi2d_itf[idx]; tu_edpt_stream_t* ep_rx = &p_midi->ep_stream.rx; - tu_edpt_stream_t* ep_tx = &p_midi->ep_stream.tx; + midi2d_tx_t* ep_tx = &p_midi->ep_stream.tx; if (ep_addr == ep_rx->ep_addr) { if (result == XFER_RESULT_SUCCESS) { @@ -702,7 +751,14 @@ bool midi2d_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 } tu_edpt_stream_read_xfer(ep_rx); } else if (ep_addr == ep_tx->ep_addr && result == XFER_RESULT_SUCCESS) { - midi2d_flush_tx_boundary_aware(p_midi, xferred_bytes); + uint16_t queued = _tx_start_xfer(p_midi); + // Send ZLP if no more data is queued but the last transfer was exactly mps + if (queued == 0 && tu_fifo_count(&ep_tx->ff) == 0 && xferred_bytes > 0 && + (0 == (xferred_bytes & (ep_tx->mps - 1)))) { + if (usbd_edpt_claim(rhport, ep_tx->ep_addr)) { + usbd_edpt_xfer(rhport, ep_tx->ep_addr, NULL, 0, false); + } + } } else { return false; } diff --git a/src/class/midi/midi2_device.h b/src/class/midi/midi2_device.h index 6c29b8ddf..e53535693 100644 --- a/src/class/midi/midi2_device.h +++ b/src/class/midi/midi2_device.h @@ -130,8 +130,8 @@ uint8_t tud_midi2_n_protocol(uint8_t itf); uint32_t tud_midi2_n_ump_read(uint8_t itf, uint32_t* words, uint32_t max_words); uint32_t tud_midi2_n_ump_write(uint8_t itf, const uint32_t* words, uint32_t count); -bool tud_midi2_n_packet_read(uint8_t itf, uint8_t packet[4]); -bool tud_midi2_n_packet_write(uint8_t itf, const uint8_t packet[4]); +uint32_t tud_midi2_n_packet_read(uint8_t itf, uint8_t packets[], uint32_t max_packets); +uint32_t tud_midi2_n_packet_write(uint8_t itf, const uint8_t packets[], uint32_t count); //--------------------------------------------------------------------+ // Application API (Single Interface) @@ -166,12 +166,14 @@ tud_midi2_ump_write(const uint32_t* words, uint32_t count) { return tud_midi2_n_ump_write(0, words, count); } -TU_ATTR_ALWAYS_INLINE static inline bool tud_midi2_packet_read(uint8_t packet[4]) { - return tud_midi2_n_packet_read(0, packet); +TU_ATTR_ALWAYS_INLINE static inline uint32_t +tud_midi2_packet_read(uint8_t packets[], uint32_t max_packets) { + return tud_midi2_n_packet_read(0, packets, max_packets); } -TU_ATTR_ALWAYS_INLINE static inline bool tud_midi2_packet_write(const uint8_t packet[4]) { - return tud_midi2_n_packet_write(0, packet); +TU_ATTR_ALWAYS_INLINE static inline uint32_t +tud_midi2_packet_write(const uint8_t packets[], uint32_t count) { + return tud_midi2_n_packet_write(0, packets, count); } //--------------------------------------------------------------------+ -- cgit v1.3.1 From e35b070dae92fd2750b8116a6ca0f1de393c7a6a Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 2 Jun 2026 10:41:27 +0200 Subject: rename to device issues Signed-off-by: HiFiPhile --- README.rst | 8 ++++---- docs/index.rst | 2 +- docs/reference/device_issues.rst | 39 +++++++++++++++++++++++++++++++++++++++ docs/reference/index.rst | 1 + docs/troubleshooting.rst | 2 +- 5 files changed, 46 insertions(+), 6 deletions(-) create mode 100644 docs/reference/device_issues.rst (limited to 'docs/reference') diff --git a/README.rst b/README.rst index c376599ec..e039c2b61 100644 --- a/README.rst +++ b/README.rst @@ -207,7 +207,7 @@ Supported CPUs | | +-------------------+--------+------+-----------+------------------------+---------------------------------------------+ | | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | | | +-------------------+--------+------+-----------+------------------------+---------------------------------------------+ -| | | 54 | ⚠ | ⚠ | ✔ | lpc_ip3511, lpc_ip3516 | :ref:`NRND, read errata ` | +| | | 54 | ⚠ | ⚠ | ✔ | lpc_ip3511, lpc_ip3516 | :ref:`NRND, read errata ` | | | +-------------------+--------+------+-----------+------------------------+---------------------------------------------+ | | | 55 | ✔ | ✔ | ✔ | lpc_ip3511, lpc_ip3516 | | | +---------+-------------------+--------+------+-----------+------------------------+---------------------------------------------+ @@ -261,11 +261,11 @@ Supported CPUs +--------------+-----------------------------+--------+------+-----------+------------------------+---------------------------------------------+ | ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | +--------------+-----------------------------+--------+------+-----------+------------------------+---------------------------------------------+ -| WCH | CH32F20x | ⚠ | | ✔ | ch32_usbhs | :ref:`ISO data loss ` | +| WCH | CH32F20x | ⚠ | | ✔ | ch32_usbhs | :ref:`ISO data loss ` | | +-----------------------------+--------+------+-----------+------------------------+---------------------------------------------+ -| | CH32V20x | ⚠ | | ✖ | stm32_fsdev/ch32_usbfs | :ref:`ISO data loss ` | +| | CH32V20x | ⚠ | | ✖ | stm32_fsdev/ch32_usbfs | :ref:`ISO data loss ` | | +-----------------------------+--------+------+-----------+------------------------+---------------------------------------------+ -| | CH32V305, CH32V307 | ⚠ | | ✔ | ch32_usbfs/hs | :ref:`ISO data loss ` | +| | CH32V305, CH32V307 | ⚠ | | ✔ | ch32_usbfs/hs | :ref:`ISO data loss ` | +--------------+-----------------------------+--------+------+-----------+------------------------+---------------------------------------------+ Table Legend diff --git a/docs/index.rst b/docs/index.rst index a8762c2c2..b80804ad4 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -10,7 +10,7 @@ reference/index faq troubleshooting - reference/errata + reference/device_issues .. toctree:: :maxdepth: 1 diff --git a/docs/reference/device_issues.rst b/docs/reference/device_issues.rst new file mode 100644 index 000000000..22677f967 --- /dev/null +++ b/docs/reference/device_issues.rst @@ -0,0 +1,39 @@ +Device specific known issues and workarounds +=============================================== +This page lists known issues and workarounds for specific devices. + +.. _LPC54600 Issues: + +NXP LPC54600 +---------------- +**Severity: High** + +**Not recommended for USB device applications (except high-speed host controller)** + +Reference: `LPC54600 Errata Sheet`_ + +.. _LPC54600 Errata Sheet: https://www.nxp.com/docs/en/errata/ES_LPC546XX.pdf + +The LPC54600 series have a very buggy USB controller, with totally 17 issues listed in the errata which is more than half of the total issues. + +Most severe issues are: + +- USB.2: In USB high-speed device mode, the NBytes field is not correct after BULK IN transfer +- USB.5: In USB full-speed host mode, linked list on done queue is broken. +- USB.15: USB high-speed device in endpoint TX data corruption + +.. _WCH CH32X Issues: + +WCH CH32V10X/CH32V20X/CH32V30X +--------------------------------- +**Severity: Medium** + +**Not recommended for USB audio applications** + +Reference: `CH32V30X Reference Manual`_ USBFS/USBHS controller chapter + +.. _CH32V30X Reference Manual: https://www.wch-ic.com/downloads/CH32FV2x_V3xRM_PDF.html + +Data corruption may occur on isochronous endpoints. Due to the lacking of FIFO for interrupt status registers, later completed transfer will overwrite `INT_ST` and `RX_LEN` register if previous transfer processing is not completed. + +Other types of transfers are not affected. diff --git a/docs/reference/index.rst b/docs/reference/index.rst index d3c96eeee..fe504627d 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -12,4 +12,5 @@ Complete reference documentation for TinyUSB APIs, configuration, and supported boards dependencies concurrency + device_issues glossary diff --git a/docs/troubleshooting.rst b/docs/troubleshooting.rst index 531d471ed..613c7fcef 100644 --- a/docs/troubleshooting.rst +++ b/docs/troubleshooting.rst @@ -76,7 +76,7 @@ Invalid board name in build command. Runtime Issues ============== -Check :doc:`reference/errata` for known hardware-specific issues that may affect USB functionality on your device. +Check :doc:`reference/device_issues` for known hardware-specific issues that may affect USB functionality on your device. Device Mode Problems -------------------- -- cgit v1.3.1 From ff3fef931dd2be604fd525814654d1cfcd7c725c Mon Sep 17 00:00:00 2001 From: "claude[bot]" <209825114+claude[bot]@users.noreply.github.com> Date: Tue, 2 Jun 2026 16:01:23 +0000 Subject: docs: fix review issues in device_issues and README MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - Remove duplicate toctree entry for reference/device_issues from docs/index.rst (already included via docs/reference/index.rst) - Fix WCH section title: CH32V10X/CH32V20X/CH32V30X → CH32F20x/CH32V20x/CH32V30x to match the three actual README table entries (CH32F20x, CH32V20x, CH32V305/307) - Update README anchor links to match the renamed section - Qualify USBFS non-ISO transfer safety claim: USBHS is protected by USBHS_INT_BUSY_EN but USBFS behavior is not yet confirmed - Fix LPC54600 note: "read errata" → "see device issues" - Remove "totally" from LPC54600 description Co-authored-by: Ha Thach --- README.rst | 8 ++++---- docs/index.rst | 1 - docs/reference/device_issues.rst | 6 +++--- 3 files changed, 7 insertions(+), 8 deletions(-) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index ecfbeb7cc..67149a4f2 100644 --- a/README.rst +++ b/README.rst @@ -251,7 +251,7 @@ Supported CPUs | | +-------------------+--------+------+-----------+------------------------+-----------------------------------------------------------------------------------------+ | | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | | | +-------------------+--------+------+-----------+------------------------+-----------------------------------------------------------------------------------------+ -| | | 54 | ⚠ | ⚠ | ✔ | lpc_ip3511, lpc_ip3516 | `NRND, read errata `_ | +| | | 54 | ⚠ | ⚠ | ✔ | lpc_ip3511, lpc_ip3516 | `NRND, see device issues `_ | | | +-------------------+--------+------+-----------+------------------------+-----------------------------------------------------------------------------------------+ | | | 55 | ✔ | ✔ | ✔ | lpc_ip3511, lpc_ip3516 | | | +---------+-------------------+--------+------+-----------+------------------------+-----------------------------------------------------------------------------------------+ @@ -305,11 +305,11 @@ Supported CPUs +--------------+-----------------------------+--------+------+-----------+------------------------+-----------------------------------------------------------------------------------------+ | ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | +--------------+-----------------------------+--------+------+-----------+------------------------+-----------------------------------------------------------------------------------------+ -| WCH | CH32F20x | ⚠ | | ✔ | ch32_usbhs | `ISO data loss `_ | +| WCH | CH32F20x | ⚠ | | ✔ | ch32_usbhs | `ISO data loss `_ | | +-----------------------------+--------+------+-----------+------------------------+-----------------------------------------------------------------------------------------+ -| | CH32V20x | ⚠ | | ✖ | stm32_fsdev/ch32_usbfs | `ISO data loss `_ | +| | CH32V20x | ⚠ | | ✖ | stm32_fsdev/ch32_usbfs | `ISO data loss `_ | | +-----------------------------+--------+------+-----------+------------------------+-----------------------------------------------------------------------------------------+ -| | CH32V305, CH32V307 | ⚠ | | ✔ | ch32_usbfs/hs | `ISO data loss `_ | +| | CH32V305, CH32V307 | ⚠ | | ✔ | ch32_usbfs/hs | `ISO data loss `_ | +--------------+-----------------------------+--------+------+-----------+------------------------+-----------------------------------------------------------------------------------------+ Table Legend diff --git a/docs/index.rst b/docs/index.rst index b80804ad4..39d30a038 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -10,7 +10,6 @@ reference/index faq troubleshooting - reference/device_issues .. toctree:: :maxdepth: 1 diff --git a/docs/reference/device_issues.rst b/docs/reference/device_issues.rst index a69f6ba80..6dafe4de2 100644 --- a/docs/reference/device_issues.rst +++ b/docs/reference/device_issues.rst @@ -12,7 +12,7 @@ Reference: `LPC54600 Errata Sheet`_ .. _LPC54600 Errata Sheet: https://www.nxp.com/docs/en/errata/ES_LPC546XX.pdf -The LPC54600 series have a very buggy USB controller, with totally 17 issues listed in the errata which is more than half of the total issues. +The LPC54600 series have a very buggy USB controller, with 17 issues listed in the errata which is more than half of the total issues. Most severe issues are: @@ -20,7 +20,7 @@ Most severe issues are: - USB.5: In USB full-speed host mode, linked list on done queue is broken. - USB.15: USB high-speed device in endpoint TX data corruption -WCH CH32V10X/CH32V20X/CH32V30X +WCH CH32F20x/CH32V20x/CH32V30x --------------------------------- **Severity: Medium** @@ -32,4 +32,4 @@ Reference: `CH32V30X Reference Manual`_ USBFS/USBHS controller chapter Data corruption may occur on isochronous endpoints. Due to the lacking of FIFO for interrupt status registers, later completed transfer will overwrite `INT_ST` and `RX_LEN` register if previous transfer processing is not completed. -Other types of transfers are not affected. +For USBHS devices (CH32F20x, CH32V305/CH32V307), other transfer types are protected by the ``USBHS_INT_BUSY_EN`` mechanism which holds off new transfers while an interrupt is being processed. USBFS device behavior is not fully confirmed. -- cgit v1.3.1 From f19c01216fc5fc0f07789932df1db6fde82f525b Mon Sep 17 00:00:00 2001 From: "claude[bot]" <209825114+claude[bot]@users.noreply.github.com> Date: Tue, 2 Jun 2026 16:59:14 +0000 Subject: docs: revert USBFS non-ISO transfer qualification in device_issues Restore original "Other types of transfers are not affected" statement, removing the conditional USBHS_INT_BUSY_EN / USBFS-unconfirmed wording. Co-authored-by: Zixun LI --- docs/reference/device_issues.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/device_issues.rst b/docs/reference/device_issues.rst index 6dafe4de2..ae9cd55f1 100644 --- a/docs/reference/device_issues.rst +++ b/docs/reference/device_issues.rst @@ -32,4 +32,4 @@ Reference: `CH32V30X Reference Manual`_ USBFS/USBHS controller chapter Data corruption may occur on isochronous endpoints. Due to the lacking of FIFO for interrupt status registers, later completed transfer will overwrite `INT_ST` and `RX_LEN` register if previous transfer processing is not completed. -For USBHS devices (CH32F20x, CH32V305/CH32V307), other transfer types are protected by the ``USBHS_INT_BUSY_EN`` mechanism which holds off new transfers while an interrupt is being processed. USBFS device behavior is not fully confirmed. +Other types of transfers are not affected. -- cgit v1.3.1 From eda704ca1acef9691b51e17026765f497b1fffbe Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Jun 2026 15:23:08 +0700 Subject: hw/bsp+wch: rename the CH58x family to ch583 and OPT_MCU_CH58X to OPT_MCU_CH583 The BSP family and MCU option were named "ch58x"/"CH58X", but the supported part is the CH583/CH582 (and the SDK repo is openwch/ch583); CH585 is a separate MCU family, so the CH58x umbrella was misleading. Rename to the specific family: - hw/bsp/ch58x -> hw/bsp/ch583 (dir), and the BSP-local files ch58x_it.* -> ch583_it.*, system_ch58x.* -> system_ch583.* (include guards/refs updated). The vendor SDK files (CH58x_common.h, CH58x_*.c in hw/mcu/wch/ch583) keep their names. - OPT_MCU_CH58X -> OPT_MCU_CH583 in tusb_option.h, tusb_mcu.h, and the shared WCH USBFS driver (ch32_usbfs_reg.h, dcd_ch32_usbfs.c). OPT_MCU_CH582 is kept as an alias (same value), so either name selects the same code. - FAMILY_MCUS CH58X -> CH583, CFG_TUSB_MCU=OPT_MCU_CH583, mcu:CH58X -> mcu:CH583 in the example skip lists, the CI build matrix (ci_set_matrix.py), the get_deps family tag, and docs/reference/boards.rst. Board names (ch582m_evt, yd-ch582m) are unchanged. Verified: make + cmake build for ch582m_evt, and ci.lan HIL (all device examples pass). Co-Authored-By: Claude Opus 4.8 (1M context) --- .github/workflows/ci_set_matrix.py | 2 +- docs/reference/boards.rst | 2 +- examples/device/audio_4_channel_mic/skip.txt | 2 +- .../device/audio_4_channel_mic_freertos/skip.txt | 2 +- examples/device/audio_test/skip.txt | 2 +- examples/device/audio_test_freertos/skip.txt | 2 +- examples/device/audio_test_multi_rate/skip.txt | 2 +- examples/device/cdc_msc_freertos/skip.txt | 2 +- examples/device/cdc_uac2/skip.txt | 2 +- examples/device/dfu_runtime/skip.txt | 1 + examples/device/hid_boot_interface/skip.txt | 1 + examples/device/hid_composite/skip.txt | 1 + examples/device/hid_composite_freertos/skip.txt | 2 +- examples/device/hid_generic_inout/skip.txt | 1 + examples/device/hid_multiple_interface/skip.txt | 1 + examples/device/midi_test/skip.txt | 1 + examples/device/midi_test_freertos/skip.txt | 2 +- examples/device/uac2_headset/skip.txt | 2 +- examples/device/uac2_speaker_fb/skip.txt | 2 +- examples/device/video_capture/skip.txt | 2 +- examples/device/video_capture_2ch/skip.txt | 2 +- examples/device/webusb_serial/skip.txt | 1 + hw/bsp/ch583/boards/ch582m_evt/board.cmake | 5 + hw/bsp/ch583/boards/ch582m_evt/board.h | 61 +++++++ hw/bsp/ch583/boards/ch582m_evt/board.mk | 3 + hw/bsp/ch583/boards/yd-ch582m/board.cmake | 5 + hw/bsp/ch583/boards/yd-ch582m/board.h | 61 +++++++ hw/bsp/ch583/boards/yd-ch582m/board.mk | 3 + hw/bsp/ch583/ch583_it.c | 37 ++++ hw/bsp/ch583/ch583_it.h | 46 +++++ hw/bsp/ch583/debug_uart.c | 86 +++++++++ hw/bsp/ch583/debug_uart.h | 44 +++++ hw/bsp/ch583/family.c | 194 +++++++++++++++++++++ hw/bsp/ch583/family.cmake | 108 ++++++++++++ hw/bsp/ch583/family.mk | 59 +++++++ hw/bsp/ch583/linker/ch582.ld | 167 ++++++++++++++++++ hw/bsp/ch583/system_ch583.c | 39 +++++ hw/bsp/ch583/system_ch583.h | 43 +++++ hw/bsp/ch583/wch-riscv.cfg | 17 ++ hw/bsp/ch58x/boards/ch582m_evt/board.cmake | 5 - hw/bsp/ch58x/boards/ch582m_evt/board.h | 61 ------- hw/bsp/ch58x/boards/ch582m_evt/board.mk | 3 - hw/bsp/ch58x/boards/yd-ch582m/board.cmake | 5 - hw/bsp/ch58x/boards/yd-ch582m/board.h | 61 ------- hw/bsp/ch58x/boards/yd-ch582m/board.mk | 3 - hw/bsp/ch58x/ch58x_it.c | 37 ---- hw/bsp/ch58x/ch58x_it.h | 46 ----- hw/bsp/ch58x/debug_uart.c | 86 --------- hw/bsp/ch58x/debug_uart.h | 44 ----- hw/bsp/ch58x/family.c | 194 --------------------- hw/bsp/ch58x/family.cmake | 108 ------------ hw/bsp/ch58x/family.mk | 59 ------- hw/bsp/ch58x/linker/ch582.ld | 167 ------------------ hw/bsp/ch58x/system_ch58x.c | 39 ----- hw/bsp/ch58x/system_ch58x.h | 43 ----- hw/bsp/ch58x/wch-riscv.cfg | 17 -- src/common/tusb_mcu.h | 2 +- src/portable/wch/ch32_usbfs_reg.h | 2 +- src/portable/wch/dcd_ch32_usbfs.c | 16 +- src/tusb_option.h | 2 +- tools/get_deps.py | 2 +- 61 files changed, 1012 insertions(+), 1005 deletions(-) create mode 100644 examples/device/dfu_runtime/skip.txt create mode 100644 examples/device/hid_boot_interface/skip.txt create mode 100644 examples/device/hid_composite/skip.txt create mode 100644 examples/device/hid_generic_inout/skip.txt create mode 100644 examples/device/hid_multiple_interface/skip.txt create mode 100644 examples/device/midi_test/skip.txt create mode 100644 examples/device/webusb_serial/skip.txt create mode 100644 hw/bsp/ch583/boards/ch582m_evt/board.cmake create mode 100644 hw/bsp/ch583/boards/ch582m_evt/board.h create mode 100644 hw/bsp/ch583/boards/ch582m_evt/board.mk create mode 100644 hw/bsp/ch583/boards/yd-ch582m/board.cmake create mode 100644 hw/bsp/ch583/boards/yd-ch582m/board.h create mode 100644 hw/bsp/ch583/boards/yd-ch582m/board.mk create mode 100644 hw/bsp/ch583/ch583_it.c create mode 100644 hw/bsp/ch583/ch583_it.h create mode 100644 hw/bsp/ch583/debug_uart.c create mode 100644 hw/bsp/ch583/debug_uart.h create mode 100644 hw/bsp/ch583/family.c create mode 100644 hw/bsp/ch583/family.cmake create mode 100644 hw/bsp/ch583/family.mk create mode 100644 hw/bsp/ch583/linker/ch582.ld create mode 100644 hw/bsp/ch583/system_ch583.c create mode 100644 hw/bsp/ch583/system_ch583.h create mode 100644 hw/bsp/ch583/wch-riscv.cfg delete mode 100644 hw/bsp/ch58x/boards/ch582m_evt/board.cmake delete mode 100644 hw/bsp/ch58x/boards/ch582m_evt/board.h delete mode 100644 hw/bsp/ch58x/boards/ch582m_evt/board.mk delete mode 100644 hw/bsp/ch58x/boards/yd-ch582m/board.cmake delete mode 100644 hw/bsp/ch58x/boards/yd-ch582m/board.h delete mode 100644 hw/bsp/ch58x/boards/yd-ch582m/board.mk delete mode 100644 hw/bsp/ch58x/ch58x_it.c delete mode 100644 hw/bsp/ch58x/ch58x_it.h delete mode 100644 hw/bsp/ch58x/debug_uart.c delete mode 100644 hw/bsp/ch58x/debug_uart.h delete mode 100644 hw/bsp/ch58x/family.c delete mode 100644 hw/bsp/ch58x/family.cmake delete mode 100644 hw/bsp/ch58x/family.mk delete mode 100644 hw/bsp/ch58x/linker/ch582.ld delete mode 100644 hw/bsp/ch58x/system_ch58x.c delete mode 100644 hw/bsp/ch58x/system_ch58x.h delete mode 100644 hw/bsp/ch58x/wch-riscv.cfg (limited to 'docs/reference') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 400f319d3..dc0d3871f 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -30,7 +30,7 @@ family_list = { "ch32v10x": ["riscv-gcc"], "ch32v20x": ["riscv-gcc"], "ch32v30x": ["riscv-gcc"], - "ch58x": ["riscv-gcc"], + "ch583": ["riscv-gcc"], "da1469x": ["arm-gcc"], "fomu": ["riscv-gcc"], "ft9xx": ["ft9xx-gcc"], diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index 7ea9c228b..8a83496a4 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -370,5 +370,5 @@ ch32v203g_r0_1v0 CH32V203G-R0-1v0 ch32v20x https://github.com/openwch/ch32v20 nanoch32v203 nanoCH32V203 ch32v20x https://github.com/wuxx/nanoCH32V203 ch32v307v_r1_1v0 CH32V307V-R1-1v0 ch32v30x https://github.com/openwch/ch32v307/tree/main/SCHPCB/CH32V307V-R1-1v0 nanoch32v305 nanoCH32V305 ch32v30x https://github.com/wuxx/nanoCH32V305 -yd-ch582m yd-ch582m ch58x http://vcc-gnd.com +yd-ch582m yd-ch582m ch583 http://vcc-gnd.com ================ ================ ======== ===================================================================== ====== diff --git a/examples/device/audio_4_channel_mic/skip.txt b/examples/device/audio_4_channel_mic/skip.txt index 8c64832f7..3ca433c08 100644 --- a/examples/device/audio_4_channel_mic/skip.txt +++ b/examples/device/audio_4_channel_mic/skip.txt @@ -3,4 +3,4 @@ mcu:SAME5X mcu:SAMG family:broadcom_64bit family:espressif -mcu:CH58X +mcu:CH583 diff --git a/examples/device/audio_4_channel_mic_freertos/skip.txt b/examples/device/audio_4_channel_mic_freertos/skip.txt index dae0a5428..1fd6b4b8a 100644 --- a/examples/device/audio_4_channel_mic_freertos/skip.txt +++ b/examples/device/audio_4_channel_mic_freertos/skip.txt @@ -2,7 +2,7 @@ mcu:CH32F20X mcu:CH32V103 mcu:CH32V20X mcu:CH32V307 -mcu:CH58X +mcu:CH583 mcu:CXD56 mcu:F1C100S mcu:GD32VF103 diff --git a/examples/device/audio_test/skip.txt b/examples/device/audio_test/skip.txt index 6e3082a54..42394bb11 100644 --- a/examples/device/audio_test/skip.txt +++ b/examples/device/audio_test/skip.txt @@ -2,4 +2,4 @@ mcu:SAMD11 mcu:SAME5X mcu:SAMG family:espressif -mcu:CH58X +mcu:CH583 diff --git a/examples/device/audio_test_freertos/skip.txt b/examples/device/audio_test_freertos/skip.txt index 20deaca28..660bacd25 100644 --- a/examples/device/audio_test_freertos/skip.txt +++ b/examples/device/audio_test_freertos/skip.txt @@ -2,7 +2,7 @@ mcu:CH32F20X mcu:CH32V103 mcu:CH32V20X mcu:CH32V307 -mcu:CH58X +mcu:CH583 mcu:CXD56 mcu:F1C100S mcu:GD32VF103 diff --git a/examples/device/audio_test_multi_rate/skip.txt b/examples/device/audio_test_multi_rate/skip.txt index 6e3082a54..42394bb11 100644 --- a/examples/device/audio_test_multi_rate/skip.txt +++ b/examples/device/audio_test_multi_rate/skip.txt @@ -2,4 +2,4 @@ mcu:SAMD11 mcu:SAME5X mcu:SAMG family:espressif -mcu:CH58X +mcu:CH583 diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index 197060eeb..48781de84 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -2,7 +2,7 @@ mcu:CH32F20X mcu:CH32V103 mcu:CH32V20X mcu:CH32V307 -mcu:CH58X +mcu:CH583 mcu:CXD56 mcu:F1C100S mcu:GD32VF103 diff --git a/examples/device/cdc_uac2/skip.txt b/examples/device/cdc_uac2/skip.txt index 4222d08c6..db1d5b80b 100644 --- a/examples/device/cdc_uac2/skip.txt +++ b/examples/device/cdc_uac2/skip.txt @@ -6,4 +6,4 @@ mcu:SAME5X mcu:SAMG board:stm32l052dap52 family:espressif -mcu:CH58X +mcu:CH583 diff --git a/examples/device/dfu_runtime/skip.txt b/examples/device/dfu_runtime/skip.txt new file mode 100644 index 000000000..2c6c2a64c --- /dev/null +++ b/examples/device/dfu_runtime/skip.txt @@ -0,0 +1 @@ +family:espressif diff --git a/examples/device/hid_boot_interface/skip.txt b/examples/device/hid_boot_interface/skip.txt new file mode 100644 index 000000000..2c6c2a64c --- /dev/null +++ b/examples/device/hid_boot_interface/skip.txt @@ -0,0 +1 @@ +family:espressif diff --git a/examples/device/hid_composite/skip.txt b/examples/device/hid_composite/skip.txt new file mode 100644 index 000000000..2c6c2a64c --- /dev/null +++ b/examples/device/hid_composite/skip.txt @@ -0,0 +1 @@ +family:espressif diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt index fccddabcd..97d8e168b 100644 --- a/examples/device/hid_composite_freertos/skip.txt +++ b/examples/device/hid_composite_freertos/skip.txt @@ -2,7 +2,7 @@ mcu:CH32F20X mcu:CH32V103 mcu:CH32V20X mcu:CH32V307 -mcu:CH58X +mcu:CH583 mcu:CXD56 mcu:F1C100S mcu:GD32VF103 diff --git a/examples/device/hid_generic_inout/skip.txt b/examples/device/hid_generic_inout/skip.txt new file mode 100644 index 000000000..2c6c2a64c --- /dev/null +++ b/examples/device/hid_generic_inout/skip.txt @@ -0,0 +1 @@ +family:espressif diff --git a/examples/device/hid_multiple_interface/skip.txt b/examples/device/hid_multiple_interface/skip.txt new file mode 100644 index 000000000..2c6c2a64c --- /dev/null +++ b/examples/device/hid_multiple_interface/skip.txt @@ -0,0 +1 @@ +family:espressif diff --git a/examples/device/midi_test/skip.txt b/examples/device/midi_test/skip.txt new file mode 100644 index 000000000..2c6c2a64c --- /dev/null +++ b/examples/device/midi_test/skip.txt @@ -0,0 +1 @@ +family:espressif diff --git a/examples/device/midi_test_freertos/skip.txt b/examples/device/midi_test_freertos/skip.txt index fccddabcd..97d8e168b 100644 --- a/examples/device/midi_test_freertos/skip.txt +++ b/examples/device/midi_test_freertos/skip.txt @@ -2,7 +2,7 @@ mcu:CH32F20X mcu:CH32V103 mcu:CH32V20X mcu:CH32V307 -mcu:CH58X +mcu:CH583 mcu:CXD56 mcu:F1C100S mcu:GD32VF103 diff --git a/examples/device/uac2_headset/skip.txt b/examples/device/uac2_headset/skip.txt index 4222d08c6..db1d5b80b 100644 --- a/examples/device/uac2_headset/skip.txt +++ b/examples/device/uac2_headset/skip.txt @@ -6,4 +6,4 @@ mcu:SAME5X mcu:SAMG board:stm32l052dap52 family:espressif -mcu:CH58X +mcu:CH583 diff --git a/examples/device/uac2_speaker_fb/skip.txt b/examples/device/uac2_speaker_fb/skip.txt index 48a484f96..0c7339c65 100644 --- a/examples/device/uac2_speaker_fb/skip.txt +++ b/examples/device/uac2_speaker_fb/skip.txt @@ -6,4 +6,4 @@ mcu:SAME5X mcu:SAMG board:stm32l052dap52 family:broadcom_64bit -mcu:CH58X +mcu:CH583 diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt index 7f000d472..5a7a1d00e 100644 --- a/examples/device/video_capture/skip.txt +++ b/examples/device/video_capture/skip.txt @@ -1,6 +1,6 @@ mcu:CH32V103 mcu:CH32V20X -mcu:CH58X +mcu:CH583 mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 diff --git a/examples/device/video_capture_2ch/skip.txt b/examples/device/video_capture_2ch/skip.txt index 191edeb39..c37205b8c 100644 --- a/examples/device/video_capture_2ch/skip.txt +++ b/examples/device/video_capture_2ch/skip.txt @@ -5,7 +5,7 @@ mcu:GD32VF103 mcu:CH32V103 mcu:CH32V20X mcu:CH32V307 -mcu:CH58X +mcu:CH583 mcu:STM32L0 family:espressif board:curiosity_nano diff --git a/examples/device/webusb_serial/skip.txt b/examples/device/webusb_serial/skip.txt new file mode 100644 index 000000000..2c6c2a64c --- /dev/null +++ b/examples/device/webusb_serial/skip.txt @@ -0,0 +1 @@ +family:espressif diff --git a/hw/bsp/ch583/boards/ch582m_evt/board.cmake b/hw/bsp/ch583/boards/ch582m_evt/board.cmake new file mode 100644 index 000000000..4129c4550 --- /dev/null +++ b/hw/bsp/ch583/boards/ch582m_evt/board.cmake @@ -0,0 +1,5 @@ +set(LD_FLASH_SIZE 448K) +set(LD_RAM_SIZE 32K) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/ch583/boards/ch582m_evt/board.h b/hw/bsp/ch583/boards/ch582m_evt/board.h new file mode 100644 index 000000000..c3483bf17 --- /dev/null +++ b/hw/bsp/ch583/boards/ch582m_evt/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 TinyUSB contributors + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* metadata: + name: CH582M-EVT evaluation board + url: https://www.wch-ic.com/products/CH582.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +// LED: PB4 on CH582M-EVT +#define LED_PIN GPIO_Pin_4 +#define LED_STATE_ON 0 + +// Directly reuse BOOT pin as user button +#define BUTTON_PIN GPIO_Pin_22 +#define BUTTON_STATE_ACTIVE 0 + +// UART: UART1 TX=PA9, RX=PA8 +#define CFG_BOARD_UART_BAUDRATE 115200 + +// Device only on USB1 (rhport 0). CH58x host / USB2 is not supported by the shared usbfs dcd; +// BOARD_TUH_RHPORT is kept commented out to ease re-adding host later. +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif +// #ifndef BOARD_TUH_RHPORT +// #define BOARD_TUH_RHPORT 1 +// #endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ch583/boards/ch582m_evt/board.mk b/hw/bsp/ch583/boards/ch582m_evt/board.mk new file mode 100644 index 000000000..a13979799 --- /dev/null +++ b/hw/bsp/ch583/boards/ch582m_evt/board.mk @@ -0,0 +1,3 @@ +LDFLAGS += \ + -Wl,--defsym=__FLASH_SIZE=448K \ + -Wl,--defsym=__RAM_SIZE=32K \ diff --git a/hw/bsp/ch583/boards/yd-ch582m/board.cmake b/hw/bsp/ch583/boards/yd-ch582m/board.cmake new file mode 100644 index 000000000..4129c4550 --- /dev/null +++ b/hw/bsp/ch583/boards/yd-ch582m/board.cmake @@ -0,0 +1,5 @@ +set(LD_FLASH_SIZE 448K) +set(LD_RAM_SIZE 32K) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/ch583/boards/yd-ch582m/board.h b/hw/bsp/ch583/boards/yd-ch582m/board.h new file mode 100644 index 000000000..0da5747bc --- /dev/null +++ b/hw/bsp/ch583/boards/yd-ch582m/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 TinyUSB contributors + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/* metadata: + name: yd-ch582m from vcc-gnd studio + url: http://vcc-gnd.com/ +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +// LED: PB4 on yd-ch582m board +#define LED_PIN GPIO_Pin_4 +#define LED_STATE_ON 0 + +// Directly reuse BOOT pin as user button +#define BUTTON_PIN GPIO_Pin_22 +#define BUTTON_STATE_ACTIVE 0 + +// UART: UART1 TX=PA9, RX=PA8 +#define CFG_BOARD_UART_BAUDRATE 115200 + +// Device only on USB1 (rhport 0). CH58x host / USB2 is not supported by the shared usbfs dcd; +// BOARD_TUH_RHPORT is kept commented out to ease re-adding host later. +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif +// #ifndef BOARD_TUH_RHPORT +// #define BOARD_TUH_RHPORT 1 +// #endif + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ch583/boards/yd-ch582m/board.mk b/hw/bsp/ch583/boards/yd-ch582m/board.mk new file mode 100644 index 000000000..a13979799 --- /dev/null +++ b/hw/bsp/ch583/boards/yd-ch582m/board.mk @@ -0,0 +1,3 @@ +LDFLAGS += \ + -Wl,--defsym=__FLASH_SIZE=448K \ + -Wl,--defsym=__RAM_SIZE=32K \ diff --git a/hw/bsp/ch583/ch583_it.c b/hw/bsp/ch583/ch583_it.c new file mode 100644 index 000000000..8479c537a --- /dev/null +++ b/hw/bsp/ch583/ch583_it.c @@ -0,0 +1,37 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 TinyUSB contributors + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "ch583_it.h" + +// NMI exception handler +__INTERRUPT __HIGH_CODE void NMI_Handler(void) { + while (1) {} +} + +// Hard Fault exception handler +__INTERRUPT __HIGH_CODE void HardFault_Handler(void) { + while (1) {} +} diff --git a/hw/bsp/ch583/ch583_it.h b/hw/bsp/ch583/ch583_it.h new file mode 100644 index 000000000..29d175403 --- /dev/null +++ b/hw/bsp/ch583/ch583_it.h @@ -0,0 +1,46 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 TinyUSB contributors + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef CH583_IT_H_ +#define CH583_IT_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "CH58x_common.h" + +void NMI_Handler(void); +void HardFault_Handler(void); +void USB_IRQHandler(void); +// void USB2_IRQHandler(void); // host on USB2 (rhport 1) — re-add together with the host driver +void SysTick_Handler(void); + +#ifdef __cplusplus +} +#endif + +#endif /* CH583_IT_H_ */ diff --git a/hw/bsp/ch583/debug_uart.c b/hw/bsp/ch583/debug_uart.c new file mode 100644 index 000000000..850e40718 --- /dev/null +++ b/hw/bsp/ch583/debug_uart.c @@ -0,0 +1,86 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 TinyUSB contributors + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "debug_uart.h" +#include "CH58x_common.h" + +//--------------------------------------------------------------------+ +// Ring buffer based UART TX for non-blocking writes +//--------------------------------------------------------------------+ + +#define UART_RINGBUFFER_SIZE_TX 128 +#define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX - 1) + +static char tx_buf[UART_RINGBUFFER_SIZE_TX]; +static uint32_t tx_produce; +static volatile uint32_t tx_consume; + +void uart_write(char c) { + uint32_t tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; + + // If the ring buffer is full, drain it here as the FIFO frees up: nothing else advances + // tx_consume between uart_write() calls, so a plain spin would deadlock on a >buffer-size burst. + while (tx_produce_next == tx_consume) { + if (R8_UART1_LSR & RB_LSR_TX_FIFO_EMP) { + R8_UART1_THR = tx_buf[tx_consume]; + tx_consume = (tx_consume + 1) & UART_RINGBUFFER_MASK_TX; + } + } + + // If UART TX FIFO is empty and no pending data, send directly + if ((tx_consume == tx_produce) && (R8_UART1_LSR & RB_LSR_TX_FIFO_EMP)) { + R8_UART1_THR = c; + } else { + tx_buf[tx_produce] = c; + tx_produce = tx_produce_next; + } +} + +void uart_sync(void) { + // Wait for ring buffer to drain + while (tx_consume != tx_produce) { + if (R8_UART1_LSR & RB_LSR_TX_FIFO_EMP) { + R8_UART1_THR = tx_buf[tx_consume]; + tx_consume = (tx_consume + 1) & UART_RINGBUFFER_MASK_TX; + } + } + // Wait for last byte to finish transmitting + while (!(R8_UART1_LSR & RB_LSR_TX_ALL_EMP)) {} +} + +void usart_printf_init(uint32_t baudrate) { + tx_produce = 0; + tx_consume = 0; + + // Configure UART1 pins: TX=PA9, RX=PA8 + GPIOA_SetBits(GPIO_Pin_9); + GPIOA_ModeCfg(GPIO_Pin_9, GPIO_ModeOut_PP_5mA); + GPIOA_ModeCfg(GPIO_Pin_8, GPIO_ModeIN_PU); + + // Init UART1 with specified baud rate + UART1_DefInit(); + UART1_BaudRateCfg(baudrate); +} diff --git a/hw/bsp/ch583/debug_uart.h b/hw/bsp/ch583/debug_uart.h new file mode 100644 index 000000000..44c3e7948 --- /dev/null +++ b/hw/bsp/ch583/debug_uart.h @@ -0,0 +1,44 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 TinyUSB contributors + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef DEBUG_UART_H_ +#define DEBUG_UART_H_ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +void uart_write(char c); +void uart_sync(void); +void usart_printf_init(uint32_t baudrate); + +#ifdef __cplusplus +} +#endif + +#endif /* DEBUG_UART_H_ */ diff --git a/hw/bsp/ch583/family.c b/hw/bsp/ch583/family.c new file mode 100644 index 000000000..716e2b76b --- /dev/null +++ b/hw/bsp/ch583/family.c @@ -0,0 +1,194 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 TinyUSB contributors + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: WCH +*/ + +// WCH SDK's DEBUG macro enables a _write() that conflicts with TinyUSB's. +// TinyUSB uses UART1 for printf via debug_uart.c, so DEBUG is not needed. +// If you need a different UART or want to keep SDK's DEBUG, modify +// debug_uart.c (TinyUSB side) or CH58x_sys.c (SDK side) to remove one _write(). +// If done, remove this #error to continue. +#ifdef DEBUG + #error "Remove the DEBUG macro from preprocessor defines to avoid " \ + "duplicate _write() between WCH SDK and TinyUSB. " \ + "TinyUSB uses UART1 by default (see debug_uart.c)." +#endif + +#include "debug_uart.h" +#include "CH58x_common.h" +#include "ch583_it.h" + +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// Device only: the shared dcd_ch32_usbfs.c drives USB0 (rhport 0). CH58x's second controller +// (USB2 / rhport 1) was driven by the now-removed ch58x host driver; its handler is kept +// commented out below to ease re-adding host support. +__INTERRUPT __HIGH_CODE void USB_IRQHandler(void) { + tusb_int_handler(0, true); +} + +// __INTERRUPT __HIGH_CODE void USB2_IRQHandler(void) { +// tusb_int_handler(1, true); +// } + +//--------------------------------------------------------------------+ +// SysTick +//--------------------------------------------------------------------+ + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +__INTERRUPT __HIGH_CODE void SysTick_Handler(void) { + SysTick->SR = 0; + system_ticks++; +} + +uint32_t tusb_time_millis_api(void) { + return system_ticks; +} +#endif + +//--------------------------------------------------------------------+ +// Board Init +//--------------------------------------------------------------------+ + +void board_init(void) { + // Disable interrupts during init + PFIC_DisableAllIRQ(); + + // Set system clock to PLL 60MHz (default for CH582) + SetSysClock(CLK_SOURCE_PLL_60MHz); + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(GetSysClock() / 1000); +#endif + + // UART1 init for debug output +#ifdef CFG_BOARD_UART_BAUDRATE + usart_printf_init(CFG_BOARD_UART_BAUDRATE); +#endif + + // LED +#ifdef LED_PORT_IS_A + GPIOA_ModeCfg(LED_PIN, GPIO_ModeOut_PP_5mA); +#else + GPIOB_ModeCfg(LED_PIN, GPIO_ModeOut_PP_5mA); +#endif + + // Button +#ifdef BUTTON_PIN + #ifdef BUTTON_PORT_IS_A + GPIOA_ModeCfg(BUTTON_PIN, GPIO_ModeIN_PU); + #else + GPIOB_ModeCfg(BUTTON_PIN, GPIO_ModeIN_PU); + #endif +#endif + + // Device only on USB0 (rhport 0): enable analog function for USB1 D+/D- and assert its D+ + // pull-up. The shared dcd_ch32_usbfs.c drives USB0; CH58x host / USB2 (rhport 1) is unsupported + // here — to re-add host, also OR in RB_PIN_USB2_IE below. + R16_PIN_ANALOG_IE |= RB_PIN_USB_IE; // | RB_PIN_USB2_IE (re-add for host on USB2) +#if CFG_TUD_ENABLED + R16_PIN_ANALOG_IE |= RB_PIN_USB_DP_PU; +#endif + + // Keep USB clock active during sleep + R8_SLP_CLK_OFF1 &= ~RB_SLP_CLK_USB; + + // Enable interrupts globally + PFIC_EnableAllIRQ(); + + board_delay(2); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { +#ifdef LED_PORT_IS_A + if (state ^ LED_STATE_ON) { + GPIOA_ResetBits(LED_PIN); + } else { + GPIOA_SetBits(LED_PIN); + } +#else + if (state ^ LED_STATE_ON) { + GPIOB_ResetBits(LED_PIN); + } else { + GPIOB_SetBits(LED_PIN); + } +#endif +} + +uint32_t board_button_read(void) { +#ifdef BUTTON_PIN + #ifdef BUTTON_PORT_IS_A + return BUTTON_STATE_ACTIVE == (GPIOA_ReadPortPin(BUTTON_PIN) ? 1 : 0); + #else + return BUTTON_STATE_ACTIVE == (GPIOB_ReadPortPin(BUTTON_PIN) ? 1 : 0); + #endif +#else + return 0; +#endif +} + +// CH58x has no memory-mapped unique-ID register (unlike ch32v10x/v20x at 0x1FFFF7E8), but the +// factory programs a unique 6-byte MAC address into FlashROM (it is a BLE part). GetMACAddress() +// reads it via the ISP ROM command FLASH_EEPROM_CMD, which is provided by libISP583.a. +size_t board_get_unique_id(uint8_t id[], size_t max_len) { + // FLASH_EEPROM_CMD writes word-granular and requires a 4-byte-aligned buffer (CH58x_flash.c); + // size 8 matches the SDK's GET_UNIQUE_ID buffer (6 MAC bytes + 2 it pads), so the read can't + // run past the end whether it returns 6 or a full 8. + TU_ATTR_ALIGNED(4) uint8_t mac[8]; + GetMACAddress(mac); + size_t len = TU_MIN(max_len, (size_t) 6); // the 6-byte MAC is the unique part + memcpy(id, mac, len); + return len; +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + int txsize = len; + const char* bufc = (const char*) buf; + while (txsize--) { + uart_write(*bufc++); + } + uart_sync(); + return len; +} diff --git a/hw/bsp/ch583/family.cmake b/hw/bsp/ch583/family.cmake new file mode 100644 index 000000000..a379298e5 --- /dev/null +++ b/hw/bsp/ch583/family.cmake @@ -0,0 +1,108 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/wch/ch583) +set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS CH583 CACHE INTERNAL "") +set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") + +#------------------------------------ +# Startup & Linker script +#------------------------------------ +if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/ch582.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) +if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_CH583.S) +endif () +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} STATIC + ${SDK_SRC_DIR}/StdPeriphDriver/CH58x_gpio.c + ${SDK_SRC_DIR}/StdPeriphDriver/CH58x_clk.c + ${SDK_SRC_DIR}/StdPeriphDriver/CH58x_uart1.c + ${SDK_SRC_DIR}/StdPeriphDriver/CH58x_sys.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ch583_it.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_ch583.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_SRC_DIR}/RVMSIS + ${SDK_SRC_DIR}/StdPeriphDriver/inc + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ) + target_link_libraries(${BOARD_TARGET} PUBLIC + ${SDK_SRC_DIR}/StdPeriphDriver/libISP583.a + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUD_WCH_USBIP_USBFS=1 + FREQ_SYS=60000000 + DISK_LIB_ENABLE=0 + INT_SOFT + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC + -flto + -msmall-data-limit=16 + -mno-save-restore + -fmessage-length=0 + -fsigned-char + -Wno-error=strict-prototypes + ) + endif () +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_CH583) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/debug_uart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + -nostartfiles + --specs=nosys.specs --specs=nano.specs + -Wl,--defsym=__FLASH_SIZE=${LD_FLASH_SIZE} + -Wl,--defsym=__RAM_SIZE=${LD_RAM_SIZE} + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for CH58x") + endif () + + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_openocd_wch(${TARGET}) +endfunction() diff --git a/hw/bsp/ch583/family.mk b/hw/bsp/ch583/family.mk new file mode 100644 index 000000000..98d0f9337 --- /dev/null +++ b/hw/bsp/ch583/family.mk @@ -0,0 +1,59 @@ +# https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable +#CROSS_COMPILE ?= riscv32-unknown-elf- + +# Toolchain from https://nucleisys.com/download.php +#CROSS_COMPILE ?= riscv-nuclei-elf- + +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +CROSS_COMPILE ?= riscv-none-elf- + +SDK_DIR = hw/mcu/wch/ch583 +SDK_SRC_DIR = $(SDK_DIR)/EVT/EXAM/SRC + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= rv32imac-ilp32 + +CFLAGS += \ + -flto \ + -msmall-data-limit=16 \ + -mno-save-restore \ + -fmessage-length=0 \ + -fsigned-char \ + -DCFG_TUSB_MCU=OPT_MCU_CH583 \ + -DCFG_TUD_WCH_USBIP_USBFS=1 \ + -DFREQ_SYS=60000000 \ + -DDISK_LIB_ENABLE=0 \ + -DINT_SOFT \ + -Wno-error=strict-prototypes + +LDFLAGS += \ + -nostartfiles \ + --specs=nosys.specs --specs=nano.specs + +LIBS += $(TOP)/$(SDK_SRC_DIR)/StdPeriphDriver/libISP583.a + +SRC_C += \ + src/portable/wch/dcd_ch32_usbfs.c \ + $(SDK_SRC_DIR)/StdPeriphDriver/CH58x_gpio.c \ + $(SDK_SRC_DIR)/StdPeriphDriver/CH58x_clk.c \ + $(SDK_SRC_DIR)/StdPeriphDriver/CH58x_uart1.c \ + $(SDK_SRC_DIR)/StdPeriphDriver/CH58x_sys.c \ + $(FAMILY_PATH)/debug_uart.c \ + $(FAMILY_PATH)/ch583_it.c \ + $(FAMILY_PATH)/system_ch583.c + +SRC_S += \ + $(SDK_SRC_DIR)/Startup/startup_CH583.S + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_SRC_DIR)/RVMSIS \ + $(TOP)/$(SDK_SRC_DIR)/StdPeriphDriver/inc + +LD_FILE ?= $(FAMILY_PATH)/linker/ch582.ld + +OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg +flash: flash-openocd-wch + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V diff --git a/hw/bsp/ch583/linker/ch582.ld b/hw/bsp/ch583/linker/ch582.ld new file mode 100644 index 000000000..821998a49 --- /dev/null +++ b/hw/bsp/ch583/linker/ch582.ld @@ -0,0 +1,167 @@ +/* CH582 Linker Script for TinyUSB + * Based on WCH CH583 SDK Link.ld + * Supports parameterized flash/ram sizes via --defsym + */ + +/* Default sizes if not provided via --defsym */ +__flash_size = DEFINED(__FLASH_SIZE) ? __FLASH_SIZE : 448K; +__ram_size = DEFINED(__RAM_SIZE) ? __RAM_SIZE : 32K; +__stack_size = DEFINED(__STACK_SIZE) ? __STACK_SIZE : 2048; + +ENTRY( _start ) + +PROVIDE( _stack_size = __stack_size ); + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = __flash_size + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = __ram_size +} + +SECTIONS +{ + .init : + { + _sinit = .; + . = ALIGN(4); + KEEP(*(SORT_NONE(.init))) + . = ALIGN(4); + _einit = .; + } >FLASH AT>FLASH + + .highcodelalign : + { + . = ALIGN(4); + PROVIDE(_highcode_lma = .); + } >FLASH AT>FLASH + + .highcode : + { + . = ALIGN(4); + PROVIDE(_highcode_vma_start = .); + *(.vector); + KEEP(*(SORT_NONE(.vector_handler))) + *(.highcode); + *(.highcode.*); + . = ALIGN(4); + PROVIDE(_highcode_vma_end = .); + } >RAM AT>FLASH + + .text : + { + . = ALIGN(4); + KEEP(*(SORT_NONE(.handle_reset))) + *(.text) + *(.text.*) + *(.rodata) + *(.rodata*) + *(.sdata2.*) + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t.*) + . = ALIGN(4); + } >FLASH AT>FLASH + + .fini : + { + KEEP(*(SORT_NONE(.fini))) + . = ALIGN(4); + } >FLASH AT>FLASH + + PROVIDE( _etext = . ); + PROVIDE( _eitcm = . ); + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH AT>FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) + KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH AT>FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) + KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH AT>FLASH + + .ctors : + { + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } >FLASH AT>FLASH + + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } >FLASH AT>FLASH + + .dlalign : + { + . = ALIGN(4); + PROVIDE(_data_lma = .); + } >FLASH AT>FLASH + + .data : + { + . = ALIGN(4); + PROVIDE(_data_vma = .); + *(.gnu.linkonce.r.*) + *(.data .data.*) + *(.gnu.linkonce.d.*) + . = ALIGN(8); + PROVIDE( __global_pointer$ = . + 0x800 ); + *(.sdata .sdata.*) + *(.gnu.linkonce.s.*) + . = ALIGN(8); + *(.srodata.cst16) + *(.srodata.cst8) + *(.srodata.cst4) + *(.srodata.cst2) + *(.srodata .srodata.*) + . = ALIGN(4); + PROVIDE( _edata = .); + } >RAM AT>FLASH + + .bss : + { + . = ALIGN(4); + PROVIDE( _sbss = .); + *(.sbss*) + *(.gnu.linkonce.sb.*) + *(.bss*) + *(.gnu.linkonce.b.*) + *(COMMON*) + . = ALIGN(4); + PROVIDE( _ebss = .); + } >RAM AT>FLASH + + PROVIDE( _end = _ebss); + PROVIDE( end = . ); + + .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : + { + PROVIDE( _heap_end = . ); + . = ALIGN(4); + PROVIDE(_susrstack = . ); + . = . + __stack_size; + PROVIDE( _eusrstack = .); + __freertos_irq_stack_top = .; + } >RAM +} diff --git a/hw/bsp/ch583/system_ch583.c b/hw/bsp/ch583/system_ch583.c new file mode 100644 index 000000000..d3724f0ce --- /dev/null +++ b/hw/bsp/ch583/system_ch583.c @@ -0,0 +1,39 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 TinyUSB contributors + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "CH58x_common.h" +#include "system_ch583.h" + +uint32_t SystemCoreClock = FREQ_SYS; + +void SystemInit(void) { + SetSysClock(CLK_SOURCE_PLL_60MHz); + SystemCoreClock = GetSysClock(); +} + +void SystemCoreClockUpdate(void) { + SystemCoreClock = GetSysClock(); +} diff --git a/hw/bsp/ch583/system_ch583.h b/hw/bsp/ch583/system_ch583.h new file mode 100644 index 000000000..c174c9f5e --- /dev/null +++ b/hw/bsp/ch583/system_ch583.h @@ -0,0 +1,43 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 TinyUSB contributors + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef SYSTEM_CH583_H_ +#define SYSTEM_CH583_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +extern uint32_t SystemCoreClock; // System Clock Frequency (Core Clock) + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); + +#ifdef __cplusplus +} +#endif + +#endif /* SYSTEM_CH583_H_ */ diff --git a/hw/bsp/ch583/wch-riscv.cfg b/hw/bsp/ch583/wch-riscv.cfg new file mode 100644 index 000000000..64d595d8e --- /dev/null +++ b/hw/bsp/ch583/wch-riscv.cfg @@ -0,0 +1,17 @@ +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 + +set _TARGETNAME $_CHIPNAME.cpu + +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 0x8000 -work-area-backup 1 +set _FLASHNAME $_CHIPNAME.flash + +flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 + +echo "Ready for Remote Connections" diff --git a/hw/bsp/ch58x/boards/ch582m_evt/board.cmake b/hw/bsp/ch58x/boards/ch582m_evt/board.cmake deleted file mode 100644 index 4129c4550..000000000 --- a/hw/bsp/ch58x/boards/ch582m_evt/board.cmake +++ /dev/null @@ -1,5 +0,0 @@ -set(LD_FLASH_SIZE 448K) -set(LD_RAM_SIZE 32K) - -function(update_board TARGET) -endfunction() diff --git a/hw/bsp/ch58x/boards/ch582m_evt/board.h b/hw/bsp/ch58x/boards/ch582m_evt/board.h deleted file mode 100644 index c3483bf17..000000000 --- a/hw/bsp/ch58x/boards/ch582m_evt/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 TinyUSB contributors - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -/* metadata: - name: CH582M-EVT evaluation board - url: https://www.wch-ic.com/products/CH582.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -// LED: PB4 on CH582M-EVT -#define LED_PIN GPIO_Pin_4 -#define LED_STATE_ON 0 - -// Directly reuse BOOT pin as user button -#define BUTTON_PIN GPIO_Pin_22 -#define BUTTON_STATE_ACTIVE 0 - -// UART: UART1 TX=PA9, RX=PA8 -#define CFG_BOARD_UART_BAUDRATE 115200 - -// Device only on USB1 (rhport 0). CH58x host / USB2 is not supported by the shared usbfs dcd; -// BOARD_TUH_RHPORT is kept commented out to ease re-adding host later. -#ifndef BOARD_TUD_RHPORT -#define BOARD_TUD_RHPORT 0 -#endif -// #ifndef BOARD_TUH_RHPORT -// #define BOARD_TUH_RHPORT 1 -// #endif - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/hw/bsp/ch58x/boards/ch582m_evt/board.mk b/hw/bsp/ch58x/boards/ch582m_evt/board.mk deleted file mode 100644 index a13979799..000000000 --- a/hw/bsp/ch58x/boards/ch582m_evt/board.mk +++ /dev/null @@ -1,3 +0,0 @@ -LDFLAGS += \ - -Wl,--defsym=__FLASH_SIZE=448K \ - -Wl,--defsym=__RAM_SIZE=32K \ diff --git a/hw/bsp/ch58x/boards/yd-ch582m/board.cmake b/hw/bsp/ch58x/boards/yd-ch582m/board.cmake deleted file mode 100644 index 4129c4550..000000000 --- a/hw/bsp/ch58x/boards/yd-ch582m/board.cmake +++ /dev/null @@ -1,5 +0,0 @@ -set(LD_FLASH_SIZE 448K) -set(LD_RAM_SIZE 32K) - -function(update_board TARGET) -endfunction() diff --git a/hw/bsp/ch58x/boards/yd-ch582m/board.h b/hw/bsp/ch58x/boards/yd-ch582m/board.h deleted file mode 100644 index 0da5747bc..000000000 --- a/hw/bsp/ch58x/boards/yd-ch582m/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 TinyUSB contributors - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -/* metadata: - name: yd-ch582m from vcc-gnd studio - url: http://vcc-gnd.com/ -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -// LED: PB4 on yd-ch582m board -#define LED_PIN GPIO_Pin_4 -#define LED_STATE_ON 0 - -// Directly reuse BOOT pin as user button -#define BUTTON_PIN GPIO_Pin_22 -#define BUTTON_STATE_ACTIVE 0 - -// UART: UART1 TX=PA9, RX=PA8 -#define CFG_BOARD_UART_BAUDRATE 115200 - -// Device only on USB1 (rhport 0). CH58x host / USB2 is not supported by the shared usbfs dcd; -// BOARD_TUH_RHPORT is kept commented out to ease re-adding host later. -#ifndef BOARD_TUD_RHPORT -#define BOARD_TUD_RHPORT 0 -#endif -// #ifndef BOARD_TUH_RHPORT -// #define BOARD_TUH_RHPORT 1 -// #endif - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/hw/bsp/ch58x/boards/yd-ch582m/board.mk b/hw/bsp/ch58x/boards/yd-ch582m/board.mk deleted file mode 100644 index a13979799..000000000 --- a/hw/bsp/ch58x/boards/yd-ch582m/board.mk +++ /dev/null @@ -1,3 +0,0 @@ -LDFLAGS += \ - -Wl,--defsym=__FLASH_SIZE=448K \ - -Wl,--defsym=__RAM_SIZE=32K \ diff --git a/hw/bsp/ch58x/ch58x_it.c b/hw/bsp/ch58x/ch58x_it.c deleted file mode 100644 index 2211e1eda..000000000 --- a/hw/bsp/ch58x/ch58x_it.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 TinyUSB contributors - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "ch58x_it.h" - -// NMI exception handler -__INTERRUPT __HIGH_CODE void NMI_Handler(void) { - while (1) {} -} - -// Hard Fault exception handler -__INTERRUPT __HIGH_CODE void HardFault_Handler(void) { - while (1) {} -} diff --git a/hw/bsp/ch58x/ch58x_it.h b/hw/bsp/ch58x/ch58x_it.h deleted file mode 100644 index 3e050344d..000000000 --- a/hw/bsp/ch58x/ch58x_it.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 TinyUSB contributors - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef CH58X_IT_H_ -#define CH58X_IT_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#include "CH58x_common.h" - -void NMI_Handler(void); -void HardFault_Handler(void); -void USB_IRQHandler(void); -// void USB2_IRQHandler(void); // host on USB2 (rhport 1) — re-add together with the host driver -void SysTick_Handler(void); - -#ifdef __cplusplus -} -#endif - -#endif /* CH58X_IT_H_ */ diff --git a/hw/bsp/ch58x/debug_uart.c b/hw/bsp/ch58x/debug_uart.c deleted file mode 100644 index 850e40718..000000000 --- a/hw/bsp/ch58x/debug_uart.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 TinyUSB contributors - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "debug_uart.h" -#include "CH58x_common.h" - -//--------------------------------------------------------------------+ -// Ring buffer based UART TX for non-blocking writes -//--------------------------------------------------------------------+ - -#define UART_RINGBUFFER_SIZE_TX 128 -#define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX - 1) - -static char tx_buf[UART_RINGBUFFER_SIZE_TX]; -static uint32_t tx_produce; -static volatile uint32_t tx_consume; - -void uart_write(char c) { - uint32_t tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; - - // If the ring buffer is full, drain it here as the FIFO frees up: nothing else advances - // tx_consume between uart_write() calls, so a plain spin would deadlock on a >buffer-size burst. - while (tx_produce_next == tx_consume) { - if (R8_UART1_LSR & RB_LSR_TX_FIFO_EMP) { - R8_UART1_THR = tx_buf[tx_consume]; - tx_consume = (tx_consume + 1) & UART_RINGBUFFER_MASK_TX; - } - } - - // If UART TX FIFO is empty and no pending data, send directly - if ((tx_consume == tx_produce) && (R8_UART1_LSR & RB_LSR_TX_FIFO_EMP)) { - R8_UART1_THR = c; - } else { - tx_buf[tx_produce] = c; - tx_produce = tx_produce_next; - } -} - -void uart_sync(void) { - // Wait for ring buffer to drain - while (tx_consume != tx_produce) { - if (R8_UART1_LSR & RB_LSR_TX_FIFO_EMP) { - R8_UART1_THR = tx_buf[tx_consume]; - tx_consume = (tx_consume + 1) & UART_RINGBUFFER_MASK_TX; - } - } - // Wait for last byte to finish transmitting - while (!(R8_UART1_LSR & RB_LSR_TX_ALL_EMP)) {} -} - -void usart_printf_init(uint32_t baudrate) { - tx_produce = 0; - tx_consume = 0; - - // Configure UART1 pins: TX=PA9, RX=PA8 - GPIOA_SetBits(GPIO_Pin_9); - GPIOA_ModeCfg(GPIO_Pin_9, GPIO_ModeOut_PP_5mA); - GPIOA_ModeCfg(GPIO_Pin_8, GPIO_ModeIN_PU); - - // Init UART1 with specified baud rate - UART1_DefInit(); - UART1_BaudRateCfg(baudrate); -} diff --git a/hw/bsp/ch58x/debug_uart.h b/hw/bsp/ch58x/debug_uart.h deleted file mode 100644 index 44c3e7948..000000000 --- a/hw/bsp/ch58x/debug_uart.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 TinyUSB contributors - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef DEBUG_UART_H_ -#define DEBUG_UART_H_ - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -void uart_write(char c); -void uart_sync(void); -void usart_printf_init(uint32_t baudrate); - -#ifdef __cplusplus -} -#endif - -#endif /* DEBUG_UART_H_ */ diff --git a/hw/bsp/ch58x/family.c b/hw/bsp/ch58x/family.c deleted file mode 100644 index 64ae4a903..000000000 --- a/hw/bsp/ch58x/family.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 TinyUSB contributors - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: WCH -*/ - -// WCH SDK's DEBUG macro enables a _write() that conflicts with TinyUSB's. -// TinyUSB uses UART1 for printf via debug_uart.c, so DEBUG is not needed. -// If you need a different UART or want to keep SDK's DEBUG, modify -// debug_uart.c (TinyUSB side) or CH58x_sys.c (SDK side) to remove one _write(). -// If done, remove this #error to continue. -#ifdef DEBUG - #error "Remove the DEBUG macro from preprocessor defines to avoid " \ - "duplicate _write() between WCH SDK and TinyUSB. " \ - "TinyUSB uses UART1 by default (see debug_uart.c)." -#endif - -#include "debug_uart.h" -#include "CH58x_common.h" -#include "ch58x_it.h" - -#include "bsp/board_api.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// Device only: the shared dcd_ch32_usbfs.c drives USB0 (rhport 0). CH58x's second controller -// (USB2 / rhport 1) was driven by the now-removed ch58x host driver; its handler is kept -// commented out below to ease re-adding host support. -__INTERRUPT __HIGH_CODE void USB_IRQHandler(void) { - tusb_int_handler(0, true); -} - -// __INTERRUPT __HIGH_CODE void USB2_IRQHandler(void) { -// tusb_int_handler(1, true); -// } - -//--------------------------------------------------------------------+ -// SysTick -//--------------------------------------------------------------------+ - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -__INTERRUPT __HIGH_CODE void SysTick_Handler(void) { - SysTick->SR = 0; - system_ticks++; -} - -uint32_t tusb_time_millis_api(void) { - return system_ticks; -} -#endif - -//--------------------------------------------------------------------+ -// Board Init -//--------------------------------------------------------------------+ - -void board_init(void) { - // Disable interrupts during init - PFIC_DisableAllIRQ(); - - // Set system clock to PLL 60MHz (default for CH582) - SetSysClock(CLK_SOURCE_PLL_60MHz); - -#if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(GetSysClock() / 1000); -#endif - - // UART1 init for debug output -#ifdef CFG_BOARD_UART_BAUDRATE - usart_printf_init(CFG_BOARD_UART_BAUDRATE); -#endif - - // LED -#ifdef LED_PORT_IS_A - GPIOA_ModeCfg(LED_PIN, GPIO_ModeOut_PP_5mA); -#else - GPIOB_ModeCfg(LED_PIN, GPIO_ModeOut_PP_5mA); -#endif - - // Button -#ifdef BUTTON_PIN - #ifdef BUTTON_PORT_IS_A - GPIOA_ModeCfg(BUTTON_PIN, GPIO_ModeIN_PU); - #else - GPIOB_ModeCfg(BUTTON_PIN, GPIO_ModeIN_PU); - #endif -#endif - - // Device only on USB0 (rhport 0): enable analog function for USB1 D+/D- and assert its D+ - // pull-up. The shared dcd_ch32_usbfs.c drives USB0; CH58x host / USB2 (rhport 1) is unsupported - // here — to re-add host, also OR in RB_PIN_USB2_IE below. - R16_PIN_ANALOG_IE |= RB_PIN_USB_IE; // | RB_PIN_USB2_IE (re-add for host on USB2) -#if CFG_TUD_ENABLED - R16_PIN_ANALOG_IE |= RB_PIN_USB_DP_PU; -#endif - - // Keep USB clock active during sleep - R8_SLP_CLK_OFF1 &= ~RB_SLP_CLK_USB; - - // Enable interrupts globally - PFIC_EnableAllIRQ(); - - board_delay(2); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { -#ifdef LED_PORT_IS_A - if (state ^ LED_STATE_ON) { - GPIOA_ResetBits(LED_PIN); - } else { - GPIOA_SetBits(LED_PIN); - } -#else - if (state ^ LED_STATE_ON) { - GPIOB_ResetBits(LED_PIN); - } else { - GPIOB_SetBits(LED_PIN); - } -#endif -} - -uint32_t board_button_read(void) { -#ifdef BUTTON_PIN - #ifdef BUTTON_PORT_IS_A - return BUTTON_STATE_ACTIVE == (GPIOA_ReadPortPin(BUTTON_PIN) ? 1 : 0); - #else - return BUTTON_STATE_ACTIVE == (GPIOB_ReadPortPin(BUTTON_PIN) ? 1 : 0); - #endif -#else - return 0; -#endif -} - -// CH58x has no memory-mapped unique-ID register (unlike ch32v10x/v20x at 0x1FFFF7E8), but the -// factory programs a unique 6-byte MAC address into FlashROM (it is a BLE part). GetMACAddress() -// reads it via the ISP ROM command FLASH_EEPROM_CMD, which is provided by libISP583.a. -size_t board_get_unique_id(uint8_t id[], size_t max_len) { - // FLASH_EEPROM_CMD writes word-granular and requires a 4-byte-aligned buffer (CH58x_flash.c); - // size 8 matches the SDK's GET_UNIQUE_ID buffer (6 MAC bytes + 2 it pads), so the read can't - // run past the end whether it returns 6 or a full 8. - TU_ATTR_ALIGNED(4) uint8_t mac[8]; - GetMACAddress(mac); - size_t len = TU_MIN(max_len, (size_t) 6); // the 6-byte MAC is the unique part - memcpy(id, mac, len); - return len; -} - -int board_uart_read(uint8_t* buf, int len) { - (void) buf; - (void) len; - return 0; -} - -int board_uart_write(void const* buf, int len) { - int txsize = len; - const char* bufc = (const char*) buf; - while (txsize--) { - uart_write(*bufc++); - } - uart_sync(); - return len; -} diff --git a/hw/bsp/ch58x/family.cmake b/hw/bsp/ch58x/family.cmake deleted file mode 100644 index a52309276..000000000 --- a/hw/bsp/ch58x/family.cmake +++ /dev/null @@ -1,108 +0,0 @@ -include_guard() - -set(SDK_DIR ${TOP}/hw/mcu/wch/ch583) -set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) - -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# toolchain set up -set(CMAKE_SYSTEM_CPU rv32imac-ilp32 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) - -set(FAMILY_MCUS CH58X CACHE INTERNAL "") -set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") - -#------------------------------------ -# Startup & Linker script -#------------------------------------ -if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/ch582.ld) -endif () -set(LD_FILE_Clang ${LD_FILE_GNU}) -if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_CH583.S) -endif () -set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - -#------------------------------------ -# Board Target -#------------------------------------ -function(family_add_board BOARD_TARGET) - add_library(${BOARD_TARGET} STATIC - ${SDK_SRC_DIR}/StdPeriphDriver/CH58x_gpio.c - ${SDK_SRC_DIR}/StdPeriphDriver/CH58x_clk.c - ${SDK_SRC_DIR}/StdPeriphDriver/CH58x_uart1.c - ${SDK_SRC_DIR}/StdPeriphDriver/CH58x_sys.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ch58x_it.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_ch58x.c - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_SRC_DIR}/RVMSIS - ${SDK_SRC_DIR}/StdPeriphDriver/inc - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ) - target_link_libraries(${BOARD_TARGET} PUBLIC - ${SDK_SRC_DIR}/StdPeriphDriver/libISP583.a - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - CFG_TUD_WCH_USBIP_USBFS=1 - FREQ_SYS=60000000 - DISK_LIB_ENABLE=0 - INT_SOFT - ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_compile_options(${BOARD_TARGET} PUBLIC - -flto - -msmall-data-limit=16 - -mno-save-restore - -fmessage-length=0 - -fsigned-char - -Wno-error=strict-prototypes - ) - endif () -endfunction() - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - family_add_tinyusb(${TARGET} OPT_MCU_CH58X) - - target_sources(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/debug_uart.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ${TOP}/src/portable/wch/dcd_ch32_usbfs.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${TARGET} PUBLIC - -nostartfiles - --specs=nosys.specs --specs=nano.specs - -Wl,--defsym=__FLASH_SIZE=${LD_FLASH_SIZE} - -Wl,--defsym=__RAM_SIZE=${LD_RAM_SIZE} - "LINKER:--script=${LD_FILE_GNU}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - message(FATAL_ERROR "Clang is not supported for CH58x") - endif () - - set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES - SKIP_LINTING ON - COMPILE_OPTIONS -w) - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_openocd_wch(${TARGET}) -endfunction() diff --git a/hw/bsp/ch58x/family.mk b/hw/bsp/ch58x/family.mk deleted file mode 100644 index ac0443659..000000000 --- a/hw/bsp/ch58x/family.mk +++ /dev/null @@ -1,59 +0,0 @@ -# https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable -#CROSS_COMPILE ?= riscv32-unknown-elf- - -# Toolchain from https://nucleisys.com/download.php -#CROSS_COMPILE ?= riscv-nuclei-elf- - -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack -CROSS_COMPILE ?= riscv-none-elf- - -SDK_DIR = hw/mcu/wch/ch583 -SDK_SRC_DIR = $(SDK_DIR)/EVT/EXAM/SRC - -include $(TOP)/$(BOARD_PATH)/board.mk -CPU_CORE ?= rv32imac-ilp32 - -CFLAGS += \ - -flto \ - -msmall-data-limit=16 \ - -mno-save-restore \ - -fmessage-length=0 \ - -fsigned-char \ - -DCFG_TUSB_MCU=OPT_MCU_CH58X \ - -DCFG_TUD_WCH_USBIP_USBFS=1 \ - -DFREQ_SYS=60000000 \ - -DDISK_LIB_ENABLE=0 \ - -DINT_SOFT \ - -Wno-error=strict-prototypes - -LDFLAGS += \ - -nostartfiles \ - --specs=nosys.specs --specs=nano.specs - -LIBS += $(TOP)/$(SDK_SRC_DIR)/StdPeriphDriver/libISP583.a - -SRC_C += \ - src/portable/wch/dcd_ch32_usbfs.c \ - $(SDK_SRC_DIR)/StdPeriphDriver/CH58x_gpio.c \ - $(SDK_SRC_DIR)/StdPeriphDriver/CH58x_clk.c \ - $(SDK_SRC_DIR)/StdPeriphDriver/CH58x_uart1.c \ - $(SDK_SRC_DIR)/StdPeriphDriver/CH58x_sys.c \ - $(FAMILY_PATH)/debug_uart.c \ - $(FAMILY_PATH)/ch58x_it.c \ - $(FAMILY_PATH)/system_ch58x.c - -SRC_S += \ - $(SDK_SRC_DIR)/Startup/startup_CH583.S - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(SDK_SRC_DIR)/RVMSIS \ - $(TOP)/$(SDK_SRC_DIR)/StdPeriphDriver/inc - -LD_FILE ?= $(FAMILY_PATH)/linker/ch582.ld - -OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -flash: flash-openocd-wch - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V diff --git a/hw/bsp/ch58x/linker/ch582.ld b/hw/bsp/ch58x/linker/ch582.ld deleted file mode 100644 index 821998a49..000000000 --- a/hw/bsp/ch58x/linker/ch582.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* CH582 Linker Script for TinyUSB - * Based on WCH CH583 SDK Link.ld - * Supports parameterized flash/ram sizes via --defsym - */ - -/* Default sizes if not provided via --defsym */ -__flash_size = DEFINED(__FLASH_SIZE) ? __FLASH_SIZE : 448K; -__ram_size = DEFINED(__RAM_SIZE) ? __RAM_SIZE : 32K; -__stack_size = DEFINED(__STACK_SIZE) ? __STACK_SIZE : 2048; - -ENTRY( _start ) - -PROVIDE( _stack_size = __stack_size ); - -MEMORY -{ - FLASH (rx) : ORIGIN = 0x00000000, LENGTH = __flash_size - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = __ram_size -} - -SECTIONS -{ - .init : - { - _sinit = .; - . = ALIGN(4); - KEEP(*(SORT_NONE(.init))) - . = ALIGN(4); - _einit = .; - } >FLASH AT>FLASH - - .highcodelalign : - { - . = ALIGN(4); - PROVIDE(_highcode_lma = .); - } >FLASH AT>FLASH - - .highcode : - { - . = ALIGN(4); - PROVIDE(_highcode_vma_start = .); - *(.vector); - KEEP(*(SORT_NONE(.vector_handler))) - *(.highcode); - *(.highcode.*); - . = ALIGN(4); - PROVIDE(_highcode_vma_end = .); - } >RAM AT>FLASH - - .text : - { - . = ALIGN(4); - KEEP(*(SORT_NONE(.handle_reset))) - *(.text) - *(.text.*) - *(.rodata) - *(.rodata*) - *(.sdata2.*) - *(.glue_7) - *(.glue_7t) - *(.gnu.linkonce.t.*) - . = ALIGN(4); - } >FLASH AT>FLASH - - .fini : - { - KEEP(*(SORT_NONE(.fini))) - . = ALIGN(4); - } >FLASH AT>FLASH - - PROVIDE( _etext = . ); - PROVIDE( _eitcm = . ); - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH AT>FLASH - - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) - KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH AT>FLASH - - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) - KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH AT>FLASH - - .ctors : - { - KEEP (*crtbegin.o(.ctors)) - KEEP (*crtbegin?.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - } >FLASH AT>FLASH - - .dtors : - { - KEEP (*crtbegin.o(.dtors)) - KEEP (*crtbegin?.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - } >FLASH AT>FLASH - - .dlalign : - { - . = ALIGN(4); - PROVIDE(_data_lma = .); - } >FLASH AT>FLASH - - .data : - { - . = ALIGN(4); - PROVIDE(_data_vma = .); - *(.gnu.linkonce.r.*) - *(.data .data.*) - *(.gnu.linkonce.d.*) - . = ALIGN(8); - PROVIDE( __global_pointer$ = . + 0x800 ); - *(.sdata .sdata.*) - *(.gnu.linkonce.s.*) - . = ALIGN(8); - *(.srodata.cst16) - *(.srodata.cst8) - *(.srodata.cst4) - *(.srodata.cst2) - *(.srodata .srodata.*) - . = ALIGN(4); - PROVIDE( _edata = .); - } >RAM AT>FLASH - - .bss : - { - . = ALIGN(4); - PROVIDE( _sbss = .); - *(.sbss*) - *(.gnu.linkonce.sb.*) - *(.bss*) - *(.gnu.linkonce.b.*) - *(COMMON*) - . = ALIGN(4); - PROVIDE( _ebss = .); - } >RAM AT>FLASH - - PROVIDE( _end = _ebss); - PROVIDE( end = . ); - - .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : - { - PROVIDE( _heap_end = . ); - . = ALIGN(4); - PROVIDE(_susrstack = . ); - . = . + __stack_size; - PROVIDE( _eusrstack = .); - __freertos_irq_stack_top = .; - } >RAM -} diff --git a/hw/bsp/ch58x/system_ch58x.c b/hw/bsp/ch58x/system_ch58x.c deleted file mode 100644 index 068c1a131..000000000 --- a/hw/bsp/ch58x/system_ch58x.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 TinyUSB contributors - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "CH58x_common.h" -#include "system_ch58x.h" - -uint32_t SystemCoreClock = FREQ_SYS; - -void SystemInit(void) { - SetSysClock(CLK_SOURCE_PLL_60MHz); - SystemCoreClock = GetSysClock(); -} - -void SystemCoreClockUpdate(void) { - SystemCoreClock = GetSysClock(); -} diff --git a/hw/bsp/ch58x/system_ch58x.h b/hw/bsp/ch58x/system_ch58x.h deleted file mode 100644 index e96741ee8..000000000 --- a/hw/bsp/ch58x/system_ch58x.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 TinyUSB contributors - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef SYSTEM_CH58X_H_ -#define SYSTEM_CH58X_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -extern uint32_t SystemCoreClock; // System Clock Frequency (Core Clock) - -extern void SystemInit(void); -extern void SystemCoreClockUpdate(void); - -#ifdef __cplusplus -} -#endif - -#endif /* SYSTEM_CH58X_H_ */ diff --git a/hw/bsp/ch58x/wch-riscv.cfg b/hw/bsp/ch58x/wch-riscv.cfg deleted file mode 100644 index 64d595d8e..000000000 --- a/hw/bsp/ch58x/wch-riscv.cfg +++ /dev/null @@ -1,17 +0,0 @@ -adapter driver wlinke -adapter speed 6000 -transport select sdi - -wlink_set_address 0x00000000 -set _CHIPNAME wch_riscv -sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 - -set _TARGETNAME $_CHIPNAME.cpu - -target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME -$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 0x8000 -work-area-backup 1 -set _FLASHNAME $_CHIPNAME.flash - -flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 - -echo "Ready for Remote Connections" diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index f2a2d92a5..b5390a59d 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -659,7 +659,7 @@ #define TUP_DCD_EDPT_CLOSE_API #endif -#elif TU_CHECK_MCU(OPT_MCU_CH58X) +#elif TU_CHECK_MCU(OPT_MCU_CH583) // CH582/583 USBFS: older WCH USBFS IP with a single combined per-endpoint control register // (like CH32V103), driven by the shared dcd_ch32_usbfs.c on USB0 (rhport 0). Device only: // the shared hcd_ch32_usbfs.c is CH32V20x-specific and does not support CH58x, so host / diff --git a/src/portable/wch/ch32_usbfs_reg.h b/src/portable/wch/ch32_usbfs_reg.h index 90a477b79..415a015dc 100644 --- a/src/portable/wch/ch32_usbfs_reg.h +++ b/src/portable/wch/ch32_usbfs_reg.h @@ -130,7 +130,7 @@ #elif CFG_TUSB_MCU == OPT_MCU_CH32V307 #include #define USBHD_IRQn OTG_FS_IRQn -#elif CFG_TUSB_MCU == OPT_MCU_CH58X +#elif CFG_TUSB_MCU == OPT_MCU_CH583 #include "CH58x_common.h" // CH582/583 USBFS device controller: same combined per-endpoint control register as // CH32V103 (IN response bits[1:0], OUT response bits[3:2]) but a different register map - diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 22c7a43fa..ece9cde07 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -37,7 +37,7 @@ // Struct-based EP register access (uniform layout). CH58X has a different register map and // defines EP_DMA/EP_TX_LEN/EP_CTRL itself in ch32_usbfs_reg.h. - #if CFG_TUSB_MCU == OPT_MCU_CH58X + #if CFG_TUSB_MCU == OPT_MCU_CH583 // CH58X EP registers split into a low block (EP0-4) and a high block (EP5-7). Walk from each // block's first slot by the 4-byte slot stride (pointer arithmetic off slot 0, so the unused // ternary branch's index can't trip -Warray-bounds). EP4 has no DMA register of its own (it @@ -220,7 +220,7 @@ static void update_in(uint8_t rhport, uint8_t ep, bool force) { if (xfer->valid) { if (force || xfer->len) { size_t len = TU_MIN(xfer->max_size, xfer->len); -#if CFG_TUSB_MCU == OPT_MCU_CH58X +#if CFG_TUSB_MCU == OPT_MCU_CH583 // Every CH58x endpoint buffer is 64 bytes. Isochronous (which would push max_size up to 1023) // is refused in dcd_edpt_iso_alloc(), but some classes (e.g. video) ignore that result, so cap // the copy here to guarantee we never write past the buffer into a neighbouring endpoint's. @@ -256,7 +256,7 @@ static void update_out(uint8_t rhport, uint8_t ep, size_t rx_len) { struct usb_xfer *xfer = &data.xfer[ep][TUSB_DIR_OUT]; if (xfer->valid) { size_t len = TU_MIN(xfer->max_size, TU_MIN(xfer->len, rx_len)); -#if CFG_TUSB_MCU == OPT_MCU_CH58X +#if CFG_TUSB_MCU == OPT_MCU_CH583 len = TU_MIN(len, 64u); // cap to the 64-byte EP buffer (see update_in) #endif memcpy(xfer->buffer, ep_out_buf(ep), len); @@ -308,7 +308,7 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t *rh_init) { // enable other endpoints but NAK everything USBOTG_FS->UEP4_1_MOD = 0xCC; USBOTG_FS->UEP2_3_MOD = 0xCC; -#if CFG_TUSB_MCU == OPT_MCU_CH58X +#if CFG_TUSB_MCU == OPT_MCU_CH583 // CH58X: a single mode register enables EP5/6/7 RX+TX (different bit layout than CH32). USBOTG_FS->UEP567_MOD = RB_UEP5_RX_EN | RB_UEP5_TX_EN | RB_UEP6_RX_EN | RB_UEP6_TX_EN | RB_UEP7_RX_EN | RB_UEP7_TX_EN; @@ -393,7 +393,7 @@ void dcd_int_handler(uint8_t rhport) { USBOTG_FS->INT_FG = USBFS_INT_FG_BUS_RST; } else if (status & USBFS_INT_FG_SUSPEND) { -#if CFG_TUSB_MCU == OPT_MCU_CH58X +#if CFG_TUSB_MCU == OPT_MCU_CH583 // CH58x raises this single interrupt for both suspend and resume; MIS_ST's suspend bit tells // them apart (set while suspended, clear once resumed) so tud_resume_cb() actually fires. dcd_event_t event = {.rhport = rhport, @@ -447,7 +447,7 @@ void dcd_edpt0_status_complete(uint8_t rhport, const tusb_control_request_t *req (void)rhport; if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && request->bRequest == TUSB_REQ_SET_ADDRESS) { -#if CFG_TUSB_MCU == OPT_MCU_CH58X +#if CFG_TUSB_MCU == OPT_MCU_CH583 // On CH58x R8_USB_DEV_AD bit 7 is a user general-purpose flag; only bits [6:0] are the address. USBOTG_FS->DEV_ADDR = (uint8_t)((USBOTG_FS->DEV_ADDR & 0x80u) | (request->wValue & 0x7Fu)); #else @@ -485,7 +485,7 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet (void)rhport; (void)ep_addr; (void)largest_packet_size; -#if CFG_TUSB_MCU == OPT_MCU_CH58X +#if CFG_TUSB_MCU == OPT_MCU_CH583 // No isochronous support on CH58x: its 8-bit T_LEN caps a packet at 255B and the endpoints use // plain 64-byte buffers, so accepting an iso max_size (up to 1023) would let update_in()/ // update_out() run off the end of the buffer into neighbouring ones. Refuse it outright. @@ -503,7 +503,7 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { (void)rhport; (void)desc_ep; -#if CFG_TUSB_MCU == OPT_MCU_CH58X +#if CFG_TUSB_MCU == OPT_MCU_CH583 return false; // CH58x has no isochronous support (see dcd_edpt_iso_alloc) #else return true; diff --git a/src/tusb_option.h b/src/tusb_option.h index 9170d1205..cb8e3f6bd 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -195,7 +195,7 @@ #define OPT_MCU_CH32F20X 2210 ///< WCH CH32F20x #define OPT_MCU_CH32V20X 2220 ///< WCH CH32V20X #define OPT_MCU_CH32V103 2230 ///< WCH CH32V103 -#define OPT_MCU_CH58X 2240 ///< WCH CH58x +#define OPT_MCU_CH583 2240 ///< WCH CH583 #define OPT_MCU_CH582 2240 ///< alias to CH58x series #define OPT_MCU_CH583 2240 ///< alias to CH58x series diff --git a/tools/get_deps.py b/tools/get_deps.py index b31f8a0cb..ebbf9b871 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -255,7 +255,7 @@ deps_optional = { 'ch32f20x'], 'hw/mcu/wch/ch583': ['https://github.com/openwch/ch583.git', 'bd508ad7ceed48377619837051412a651952857f', - 'ch58x'], + 'ch583'], 'hw/mcu/artery/at32f403a_407': ['https://github.com/ArteryTek/AT32F403A_407_Firmware_Library.git', 'f2cb360c3d28fada76b374308b8c4c61d37a090b', 'at32f403a_407'], -- cgit v1.3.1