From 9d3e1aaafc00275d3ad7ba072d6e1721aa3d9df7 Mon Sep 17 00:00:00 2001 From: perigoso Date: Tue, 27 Jul 2021 19:22:00 +0100 Subject: docs: port concurrency doc to rst Signed-off-by: perigoso --- docs/reference/concurrency.rst | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 docs/reference/concurrency.rst (limited to 'docs/reference') diff --git a/docs/reference/concurrency.rst b/docs/reference/concurrency.rst new file mode 100644 index 000000000..776fa4b6d --- /dev/null +++ b/docs/reference/concurrency.rst @@ -0,0 +1,42 @@ +*********** +Concurrency +*********** + +The TinyUSB library is designed to operate on single-core MCUs with multi-threaded applications in mind. Interaction with interrupts is especially important to pay attention to. +It is compatible with optionally using a RTOS. + +General +------- + +When writing code, keep in mind that the OS (if using a RTOS) may swap out your code at any time. Also, your code can be preempted by an interrupt at any time. + +Application Code +---------------- + +The USB core does not execute application callbacks while in an interrupt context. Calls to application code are from within the USB core task context. Note that the application core will call class drivers from within their own task. + +Class Drivers +------------- + +Class driver code should never be called from an interrupt context by the USB core, though the application is allowed to call class driver functions from interrupts. USB core functions may be called simultaneously by multiple tasks. Use care that proper locking is used to guard the USBD core functions from this case. + +Class drivers are allowed to call ``usbd_*`` functions, but not ``dcd_*`` functions. + +USB Core +-------- + +All functions that may be called from an (USB core) interrupt context have a ``bool in_isr`` parameter to remind the implementer that special care must be taken. + +Interrupt handlers must not directly call class driver code, they must pass a message to the USB core's task. + + ``usbd_*`` functions may be called from interrupts without any notice. They may also be called simultaneously by multiple tasks. + +Device Drivers +-------------- + +Much of the processing of the USB stack is done in an interrupt context, and care must be taken in order to ensure variables are handled in the appropriate ways by the compiler and optimizer. + +In particular: + +* Ensure that all memory-mapped registers (including packet memory) are marked as volatile. GCC's optimizer will even combine memory access (like two 16-bit to be a 32-bit) if you don't mark the pointers as volatile. On some architectures, this can use macros like _I , _O , or _IO. +* All defined global variables are marked as ``static``. -- cgit v1.3.1 From 106924be9a6cd2cbc8eae3f6c51d335321a9f296 Mon Sep 17 00:00:00 2001 From: perigoso Date: Tue, 27 Jul 2021 19:22:20 +0100 Subject: docs: port getting started doc to rst Signed-off-by: perigoso --- docs/reference/getting_started.rst | 153 +++++++++++++++++++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 docs/reference/getting_started.rst (limited to 'docs/reference') diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst new file mode 100644 index 000000000..5f3227927 --- /dev/null +++ b/docs/reference/getting_started.rst @@ -0,0 +1,153 @@ +*************** +Getting Started +*************** + +Add TinyUSB to your project +--------------------------- + +It is relatively simple to incorporate tinyusb to your (existing) project + + +* Copy or ``git submodule`` this repo into your project in a subfolder. Let's say it is *your_project/tinyusb* +* Add all the .c in the ``tinyusb/src`` folder to your project +* Add *your_project/tinyusb/src* to your include path. Also make sure your current include path also contains the configuration file tusb_config.h. +* Make sure all required macros are all defined properly in tusb_config.h (configure file in demo application is sufficient, but you need to add a few more such as CFG_TUSB_MCU, CFG_TUSB_OS since they are passed by IDE/compiler to maintain a unique configure for all boards). +* If you use the device stack, make sure you have created/modified usb descriptors for your own need. Ultimately you need to implement all **tud descriptor** callbacks for the stack to work. +* Add tusb_init() call to your reset initialization code. +* Call ``tud_int_handler()`` (device) and/or ``tuh_int_handler()`` (host) in your USB IRQ Handler +* Implement all enabled classes's callbacks. +* If you don't use any RTOSes at all, you need to continuously and/or periodically call tud_task()/tuh_task() function. All of the callbacks and functionality are handled and invoked within the call of that task runner. + +.. code-block:: + + int main(void) + { + your_init_code(); + tusb_init(); // initialize tinyusb stack + + while(1) // the mainloop + { + your_application_code(); + + tud_task(); // device task + tuh_task(); // host task + } + } + +Examples +-------- + +For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API() should be used. Most examples will work on most of `the supported Boards `_. Firstly we need to ``git clone`` if not already + +.. code-block:: + + $ git clone https://github.com/hathach/tinyusb tinyusb + $ cd tinyusb + +Some TinyUSB examples also requires external submodule libraries in ``/lib`` such as FreeRTOS, Lightweight IP to build. Run following command to fetch them + +.. code-block:: + + $ git submodule update --init lib + +In addition, MCU driver submodule is also needed to provide low-level MCU peripheral's driver. Luckily, it will be fetched if needed when you run the ``make`` to build your board. + +Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``/examples/device/99-tinyusb.rules`` file to /etc/udev/rules.d/ then run ``sudo udevadm control --reload-rules && sudo udevadm trigger`` is good enough. + +Build +^^^^^ + +To build example, first change directory to an example folder. + +.. code-block:: + + $ cd examples/device/cdc_msc + +Then compile with ``make BOARD=[board_name] all``\ , for example + +.. code-block:: + + $ make BOARD=feather_nrf52840_express all + +Note: ``BOARD`` can be found as directory name in ``hw/bsp``\ , either in its family/boards or directly under bsp (no family). + +Port Selection +~~~~~~~~~~~~~~ + +If a board has several ports, one port is chosen by default in the individual board.mk file. Use option ``PORT=x`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: + +.. code-block:: + + $ make BOARD=stm32f746disco PORT=1 all + +Port Speed +~~~~~~~~~~ + +A MCU can support multiple operational speed. By default, the example build system will use the fastest supported on the board. Use option ``SPEED=full/high`` e.g To force F723 operate at full instead of default high speed + +.. code-block:: + + $ make BOARD=stm32f746disco SPEED=full all + +Debug +^^^^^ + +To compile for debugging add ``DEBUG=1``\ , for example + +.. code-block:: + + $ make BOARD=feather_nrf52840_express DEBUG=1 all + +Log +~~~ + +Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional ``LOG=``. LOG=1 will only print out error message, LOG=2 print more information with on-going events. LOG=3 or higher is not used yet. + +.. code-block:: + + $ make BOARD=feather_nrf52840_express LOG=2 all + +Logger +~~~~~~ + +By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: + + +* `LOGGER=rtt`: use [Segger RTT protocol](https://www.segger.com/products/debug-probes/j-link/technology/about-real-time-transfer/) + + * Cons: requires jlink as the debugger. + * Pros: work with most if not all MCUs + * Software viewer is JLink RTT Viewer/Client/Logger which is bundled with JLink driver package. + +* ``LOGGER=swo``\ : Use dedicated SWO pin of ARM Cortex SWD debug header. + + * Cons: only work with ARM Cortex MCUs minus M0 + * Pros: should be compatible with more debugger that support SWO. + * Software viewer should be provided along with your debugger driver. + +.. code-block:: + + $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=rtt all + $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=swo all + +Flash +^^^^^ + +``flash`` target will use the default on-board debugger (jlink/cmsisdap/stlink/dfu) to flash the binary, please install those support software in advance. Some board use bootloader/DFU via serial which is required to pass to make command + +.. code-block:: + + $ make BOARD=feather_nrf52840_express flash + $ make SERIAL=/dev/ttyACM0 BOARD=feather_nrf52840_express flash + +Since jlink can be used with most of the boards, there is also ``flash-jlink`` target for your convenience. + +.. code-block:: + + $ make BOARD=feather_nrf52840_express flash-jlink + +Some board use uf2 bootloader for drag & drop in to mass storage device, uf2 can be generated with ``uf2`` target + +.. code-block:: + + $ make BOARD=feather_nrf52840_express all uf2 -- cgit v1.3.1 From 62049089bacd4e604c7533e8d9de1ae09fe7222a Mon Sep 17 00:00:00 2001 From: perigoso Date: Tue, 27 Jul 2021 19:22:42 +0100 Subject: docs: add reference section index Signed-off-by: perigoso --- docs/reference/index.rst | 64 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 docs/reference/index.rst (limited to 'docs/reference') diff --git a/docs/reference/index.rst b/docs/reference/index.rst new file mode 100644 index 000000000..5da51d71a --- /dev/null +++ b/docs/reference/index.rst @@ -0,0 +1,64 @@ +********* +Reference +********* + +.. figure:: ../assets/stack.png + :width: 1600px + :alt: stackup + + representation of the TinyUSB stack. + +Device Stack +============ + +Supports multiple device configurations by dynamically changing usb descriptors. Low power functions such like suspend, resume, and remote wakeup. Following device classes are supported: + +- Audio Class 2.0 (UAC2) +- Bluetooth Host Controller Interface (BTH HCI) +- Communication Class (CDC) +- Device Firmware Update (DFU): DFU mode (WIP) and Runtinme +- Human Interface Device (HID): Generic (In & Out), Keyboard, Mouse, Gamepad etc ... +- Mass Storage Class (MSC): with multiple LUNs +- Musical Instrument Digital Interface (MIDI) +- Network with RNDIS, CDC-ECM (work in progress) +- USB Test and Measurement Class (USBTMC) +- Vendor-specific class support with generic In & Out endpoints. Can be used with MS OS 2.0 compatible descriptor to load winUSB driver without INF file. +- `WebUSB `__ with vendor-specific class + +If you have special need, `usbd_app_driver_get_cb()` can be used to write your own class driver without modifying the stack. Here is how RPi team add their reset interface [raspberrypi/pico-sdk#197](https://github.com/raspberrypi/pico-sdk/pull/197) + +Host Stack +========== + +.. admonition:: Warning + :class: warning + + Most active development is on the Device stack. The Host stack is under rework and largely untested. + +- Human Interface Device (HID): Keyboard, Mouse, Generic +- Mass Storage Class (MSC) +- Hub currently only supports 1 level of hub (due to my laziness) + +OS Abstraction layer +==================== + +TinyUSB is completely thread-safe by pushing all ISR events into a central queue, then process it later in the non-ISR context task function. It also uses semaphore/mutex to access shared resources such as CDC FIFO. Therefore the stack needs to use some of OS's basic APIs. Following OSes are already supported out of the box. + +- **No OS** +- **FreeRTOS** +- **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its [own repo](https://github.com/hathach/mynewt-tinyusb-example) + +License +======= + +All TinyUSB sources in the `src` folder are licensed under MIT license. However, each file can be individually licensed especially those in `lib` and `hw/mcu` folder. Please make sure you understand all the license term for files you use in your project. + +Index +===== + +.. toctree:: + :maxdepth: 2 + + supported + getting_started + concurrency -- cgit v1.3.1 From 42f551ec545543c22bb00e1dae4ac2358dae2528 Mon Sep 17 00:00:00 2001 From: perigoso Date: Tue, 27 Jul 2021 19:43:30 +0100 Subject: docs: add supported devices list Signed-off-by: perigoso --- docs/reference/supported.rst | 335 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 335 insertions(+) create mode 100644 docs/reference/supported.rst (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst new file mode 100644 index 000000000..e280e10a4 --- /dev/null +++ b/docs/reference/supported.rst @@ -0,0 +1,335 @@ +***************** +Supported Devices +***************** + + +Supported MCUs +============== + +.. admonition:: Warning + :class: warning + + This table is a WIP! the data is not correct, tho if a device is listed, it likely works as a usb full speed device at the least. + ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| Manufacturer | Family | Device | Host | FS | HS | Known Issues | ++==============+====================+===================+====================+===================+===================+==============+ +| Dialog | DA1469x | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| Espressif | ESP32-S2 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | ESP32-S3 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| MicroChip | SAMD11 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | SAMD21 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | SAMD51 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | SAME5x | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | SAMG55 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | SAML21 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | SAML22 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | SAME70,S70,V70,V71 | |:green_square:| | |:red_square:| | |:green_square:| | |:green_square:| | | ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| NordicSemi | nRF52833 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | nRF52840 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| Nuvoton | NUC120 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | NUC121/NUC125 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | NUC126 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | NUC505 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | ++--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| NXP | iMX | RT1011 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | RT1015 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | RT1021 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | RT1052 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | RT1062 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | RT1064 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | +| +-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | Kinetis KL25 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| +-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | LPC | 11u | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | 13 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | 15 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | 17 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | 18 | | |:yellow_square:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | 40 | | |:x:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | 43 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | 51u | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | 54 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | 55 | |:green_square:| | |:x:| | |:green_square:| | | | ++--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| Raspberry Pi | RP2040 | |:green_square:| | |:x:| | |:green_square:| | | | ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| Renesas | RX63N | | | | | | +| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | RX65N | | | | | | ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| Silabs | EFM32GG12 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | #750 | ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| Sony | CXD56 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | ++--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| ST | STM32 | L0 | |:green_square:| | | |:green_square:| | | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | F0 | |:green_square:| | | |:green_square:| | | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | F1 | |:green_square:| | | |:green_square:| | | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | F2 | |:green_square:| | | |:green_square:| | | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | F3 | |:green_square:| | | |:green_square:| | | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | F4 | |:green_square:| | | |:green_square:| | | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | F7 | |:green_square:| | | |:green_square:| | | | +| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| | | H7 | |:green_square:| | | |:green_square:| | |:green_square:| | | ++--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| TI | MSP430 | |:green_square:| | | |:green_square:| | | | ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ +| ValentyUSB | eptri | |:green_square:| | | |:green_square:| | | | ++--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ + +Table Legend +------------ + +================= =================== +|:x:| Not available +|:red_square:| Not supported +|:yellow_square:| WIP/partial support +|:green_square:| Supported +================= =================== + +Supported Boards +================ + +The board support code is only used for self-contained examples and testing. It is not used when TinyUSB is part of a larger project. It is responsible for getting the MCU started and the USB peripheral clocked with minimal of on-board devices + +- One LED : for status +- One Button : to get input from user +- One UART : optional for device, but required for host examples + +The following boards are supported (sorted alphabetically): + +Dialog DA146xx +-------------- + +- `DA14695 Development Kit – USB `__ +- `DA1469x Development Kit – Pro `__ + +Espressif ESP32-S2 +------------------ + +- Adafruit Feather ESP32-S2 +- `Adafruit Magtag 2.9" E-Ink WiFi Display `__ +- `Adafruit Metro ESP32-S2 `__ +- `ESP32-S2-Kaluga-1 `__ +- `ESP32-S2-Saola-1 `__ + +MicroChip +--------- + +SAMD11 & SAMD21 +^^^^^^^^^^^^^^^ + +- `Adafruit Circuit Playground Express `__ +- `Adafruit Feather M0 Express `__ +- `Adafruit ItsyBitsy M0 Express `__ +- `Adafruit Metro M0 Express `__ +- `Great Scott Gadgets LUNA `__ +- `Microchip SAMD11 Xplained Pro `__ +- `Microchip SAMD21 Xplained Pro `__ +- `Seeeduino Xiao `__ + +SAMD51 & SAME54 +^^^^^^^^^^^^^^^ + +- `Adafruit Feather M4 Express `__ +- `Adafruit ItsyBitsy M4 Express `__ +- `Adafruit PyBadge `__ +- `Adafruit PyPortal `__ +- `Adafruit Metro M4 Express `__ +- `D5035-01 `__ +- `Microchip SAME54 Xplained Pro `__ + +SAMG +^^^^ + +- `Microchip SAMG55 Xplained Pro `__ + +SAML2x +^^^^^^ + +- `SAML21 Xplaind Pro `__ +- `SAML22 Feather `__ +- `Sensor Watch `__ + +Nordic nRF5x +------------ + +- `Adafruit Circuit Playground Bluefruit `__ +- `Adafruit CLUE `__ +- `Adafruit Feather nRF52840 Express `__ +- `Adafruit Feather nRF52840 Sense `__ +- `Adafruit ItsyBitsy nRF52840 Express `__ +- `Arduino Nano 33 BLE `__ +- `Arduino Nano 33 BLE Sense `__ +- `Maker Diary nRF52840 MDK Dongle `__ +- `Nordic nRF52840 Development Kit (aka pca10056) `__ +- `Nordic nRF52840 Dongle (aka pca10059) `__ +- `Nordic nRF52833 Development Kit (aka pca10100) `__ +- `Raytac MDBT50Q-RX Dongle `__ + +Nuvoton +------- + +- NuTiny SDK NUC120 +- `NuTiny NUC121S `__ +- `NuTiny NUC125S `__ +- `NuTiny NUC126V `__ +- `NuTiny SDK NUC505Y `__ + +NXP +--- + +iMX RT +^^^^^^ + +- `MIMX RT1010 Evaluation Kit `__ +- `MIMX RT1015 Evaluation Kit `__ +- `MIMX RT1020 Evaluation Kit `__ +- `MIMX RT1050 Evaluation Kit `__ +- `MIMX RT1060 Evaluation Kit `__ +- `MIMX RT1064 Evaluation Kit `__ +- `Teensy 4.0 Development Board `__ + +Kinetis +^^^^^^^ + +- `FRDM-KL25Z `__ + +LPC 11-13-15 +^^^^^^^^^^^^ + +- `LPCXpresso 11u37 `__ +- `LPCXpresso 11u68 `__ +- `LPCXpresso 1347 `__ +- `LPCXpresso 1549 `__ + +LPC 17-40 +^^^^^^^^^ + +- `ARM mbed LPC1768 `__ +- `Embedded Artists LPC4088 Quick Start board `__ +- `LPCXpresso 1769 `__ + +LPC 18-43 +^^^^^^^^^ + +- `Embedded Artists LPC4357 Developer Kit `__ +- `Keil MCB1800 Evaluation Board `__ +- `LPCXpresso18S37 Development Board `__ +- `NGX LPC4330-Xplorer `__ + +LPC 51 +^^^^^^ + +- `LPCXpresso 51U68 `__ + +LPC 54 +^^^^^^ + +- `LPCXpresso 54114 `__ + +LPC55 +^^^^^ + +- `Double M33 Express `__ +- `LPCXpresso 55s28 EVK `__ +- `LPCXpresso 55s69 EVK `__ +- `MCU-Link `__ + +Renesas RX +---------- + +- `GR-CITRUS `__ +- `Renesas RX65N Target Board `__ + +Raspberry Pi RP2040 +------------------- + +- `Adafruit Feather RP2040 `__ +- `Adafruit ItsyBitsy RP2040 `__ +- `Adafruit QT Py RP2040 `__ +- `Raspberry Pi Pico `__ + +Silabs +------ + +- `EFM32GG12 Thunderboard Kit (SLTB009A) `__ + +Sony +---- + +- `Sony Spresense CXD5602 `__ + +ST STM32 +-------- + +- `Adafruit Feather STM32F405 `__ +- `Micro Python PyBoard v1.1 `__ +- `STLink-V3 Mini `__ +- `STM32 L035c8 Discovery `__ +- `STM32 L4R5zi Nucleo `__ +- `STM32 F070rb Nucleo `__ +- `STM32 F072 Evaluation `__ +- `STM32 F072rb Discovery `__ +- STM32 F103c Blue Pill +- `STM32 F207zg Nucleo `__ +- `STM32 F303vc Discovery `__ +- STM32 F401cc Black Pill +- `STM32 F407vg Discovery `__ +- `STM32 F411ce Black Pill `__ +- `STM32 F411ve Discovery `__ +- `STM32 F412zg Discovery `__ +- `STM32 F723e Discovery `__ +- `STM32 F746zg Nucleo `__ +- `STM32 F746g Discovery `__ +- `STM32 F767zi Nucleo `__ +- `STM32 F769i Discovery `__ +- `STM32 H743zi Nucleo `__ +- `STM32 H743i Evaluation `__ +- `STM32 H745i Discovery `__ + +TI +-- + +- `MSP430F5529 USB LaunchPad Evaluation Kit `__ + +Tomu +---- + +- `Fomu `__ -- cgit v1.3.1 From 1a27dad7bb0ecec1b52159a6c96aa4d86b560d87 Mon Sep 17 00:00:00 2001 From: perigoso Date: Fri, 30 Jul 2021 12:48:08 +0100 Subject: docs/supported: add Waveshare OpenH743I-C to board support list Signed-off-by: perigoso --- docs/reference/supported.rst | 1 + 1 file changed, 1 insertion(+) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index e280e10a4..0028744f6 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -323,6 +323,7 @@ ST STM32 - `STM32 H743zi Nucleo `__ - `STM32 H743i Evaluation `__ - `STM32 H745i Discovery `__ +- `Waveshare OpenH743I-C `__ TI -- -- cgit v1.3.1 From 6805c9d7349ed85c48714fc3285bb6f88bcd9f97 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 3 Aug 2021 16:36:03 +0700 Subject: add back info to readme, use stack.svg --- README.rst | 78 +++++++++++++++++++++++++++++++++++++++++++++++ docs/assets/stack.png | Bin 63797 -> 0 bytes docs/assets/stack.svg | 1 + docs/reference/index.rst | 7 +---- 4 files changed, 80 insertions(+), 6 deletions(-) delete mode 100644 docs/assets/stack.png create mode 100644 docs/assets/stack.svg (limited to 'docs/reference') diff --git a/README.rst b/README.rst index b738c7894..6de51535b 100644 --- a/README.rst +++ b/README.rst @@ -10,6 +10,84 @@ the non-ISR task function. Please take a look at the online `documentation `__. +.. figure:: docs/assets/stack.svg + :width: 500px + :alt: stackup + +:: + + . + ├── docs # Documentation + ├── examples # Sample with Makefile build support + ├── hw + │   ├── bsp # Supported boards source files + │   └── mcu # Low level mcu core & peripheral drivers + ├── lib # Sources from 3rd party such as freeRTOS, fatfs ... + ├── src # All sources files for TinyUSB stack itself. + ├── test # Unit tests for the stack + └── tools # Files used internally + +Supported MCUs +============== + +The stack supports the following MCUs: + +- **Dialog:** DA1469x +- **Espressif:** ESP32-S2, ESP32-S3 +- **MicroChip:** SAMD11, SAMD21, SAMD51, SAME5x, SAMG55, SAML21, SAML22, SAME7x +- **NordicSemi:** nRF52833, nRF52840 +- **Nuvoton:** NUC120, NUC121/NUC125, NUC126, NUC505 +- **NXP:** + + - iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064 + - Kinetis: KL25 + - LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55 + +- **Raspberry Pi:** RP2040 +- **Renesas:** RX63N, RX65N +- **Silabs:** EFM32GG12 +- **Sony:** CXD56 +- **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 both FullSpeed and HighSpeed +- **TI:** MSP430 +- **ValentyUSB:** eptri + +Here is the list of `Supported Devices`_ that can be used with provided examples. + +Device Stack +============ + +Supports multiple device configurations by dynamically changing usb descriptors. Low power functions such like suspend, resume, and remote wakeup. Following device classes are supported: + +- Audio Class 2.0 (UAC2) +- Bluetooth Host Controller Interface (BTH HCI) +- Communication Class (CDC) +- Device Firmware Update (DFU): DFU mode (WIP) and Runtinme +- Human Interface Device (HID): Generic (In & Out), Keyboard, Mouse, Gamepad etc ... +- Mass Storage Class (MSC): with multiple LUNs +- Musical Instrument Digital Interface (MIDI) +- Network with RNDIS, CDC-ECM (work in progress) +- USB Test and Measurement Class (USBTMC) +- Vendor-specific class support with generic In & Out endpoints. Can be used with MS OS 2.0 compatible descriptor to load winUSB driver without INF file. +- `WebUSB `__ with vendor-specific class + +If you have special need, `usbd_app_driver_get_cb()` can be used to write your own class driver without modifying the stack. Here is how RPi team add their reset interface [raspberrypi/pico-sdk#197](https://github.com/raspberrypi/pico-sdk/pull/197) + +Host Stack +========== + +- Human Interface Device (HID): Keyboard, Mouse, Generic +- Mass Storage Class (MSC) +- Hub currently only supports 1 level of hub (due to my laziness) + +OS Abstraction layer +==================== + +TinyUSB is completely thread-safe by pushing all ISR events into a central queue, then process it later in the non-ISR context task function. It also uses semaphore/mutex to access shared resources such as CDC FIFO. Therefore the stack needs to use some of OS's basic APIs. Following OSes are already supported out of the box. + +- **No OS** +- **FreeRTOS** +- **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its [own repo](https://github.com/hathach/mynewt-tinyusb-example) + Local Docs ========== diff --git a/docs/assets/stack.png b/docs/assets/stack.png deleted file mode 100644 index 3a9e1c7fc..000000000 Binary files a/docs/assets/stack.png and /dev/null differ diff --git a/docs/assets/stack.svg b/docs/assets/stack.svg new file mode 100644 index 000000000..85fe35e96 --- /dev/null +++ b/docs/assets/stack.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/docs/reference/index.rst b/docs/reference/index.rst index 5da51d71a..fcff03590 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -2,7 +2,7 @@ Reference ********* -.. figure:: ../assets/stack.png +.. figure:: ../assets/stack.svg :width: 1600px :alt: stackup @@ -30,11 +30,6 @@ If you have special need, `usbd_app_driver_get_cb()` can be used to write your o Host Stack ========== -.. admonition:: Warning - :class: warning - - Most active development is on the Device stack. The Host stack is under rework and largely untested. - - Human Interface Device (HID): Keyboard, Mouse, Generic - Mass Storage Class (MSC) - Hub currently only supports 1 level of hub (due to my laziness) -- cgit v1.3.1 From ebfd65a9ca438a9b0f8ad485c4825131cbb8efe8 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 19 Aug 2021 18:51:51 +0700 Subject: add stm32f103 mini v2.0 board --- docs/reference/supported.rst | 5 +- .../boards/stm32f103_mini_2/STM32F103XC_FLASH.ld | 167 +++++++++++++++++++++ hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h | 92 ++++++++++++ hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk | 11 ++ .../boards/stm32f103bluepill/STM32F103X8_FLASH.ld | 167 +++++++++++++++++++++ .../boards/stm32f103bluepill/STM32F103XB_FLASH.ld | 167 --------------------- hw/bsp/stm32f1/boards/stm32f103bluepill/board.mk | 2 +- hw/bsp/stm32f1/family.c | 4 +- 8 files changed, 443 insertions(+), 172 deletions(-) create mode 100644 hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld create mode 100644 hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h create mode 100644 hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk create mode 100644 hw/bsp/stm32f1/boards/stm32f103bluepill/STM32F103X8_FLASH.ld delete mode 100644 hw/bsp/stm32f1/boards/stm32f103bluepill/STM32F103XB_FLASH.ld (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 0028744f6..4c7d753c2 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -307,10 +307,11 @@ ST STM32 - `STM32 F070rb Nucleo `__ - `STM32 F072 Evaluation `__ - `STM32 F072rb Discovery `__ -- STM32 F103c Blue Pill +- `STM32 F103c8 Blue Pill `__ +- `STM32 F103rc Mini v2.0 `__ - `STM32 F207zg Nucleo `__ - `STM32 F303vc Discovery `__ -- STM32 F401cc Black Pill +- `STM32 F401cc Black Pill `__ - `STM32 F407vg Discovery `__ - `STM32 F411ce Black Pill `__ - `STM32 F411ve Discovery `__ diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld new file mode 100644 index 000000000..da40d1eb2 --- /dev/null +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** +** File : STM32F103XB_FLASH.ld +** +** Abstract : Linker script for STM32F103xB Device with +** 128KByte FLASH, 20KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004FFF; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 48K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h new file mode 100644 index 000000000..bedce7f14 --- /dev/null +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h @@ -0,0 +1,92 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_8 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +// UART +//#define UART_DEV USART1 +//#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +//#define UART_GPIO_PORT GPIOA +//#define UART_GPIO_AF GPIO_AF1_USART1 +//#define UART_TX_PIN GPIO_PIN_9 +//#define UART_RX_PIN GPIO_PIN_10 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32f1_clock_init(void) +{ + RCC_ClkInitTypeDef clkinitstruct = {0}; + RCC_OscInitTypeDef oscinitstruct = {0}; + RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0}; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + oscinitstruct.HSEState = RCC_HSE_ON; + oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9; + oscinitstruct.PLL.PLLState = RCC_PLL_ON; + oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + HAL_RCC_OscConfig(&oscinitstruct); + + /* USB clock selection */ + rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB; + rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2; + clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2); +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk new file mode 100644 index 000000000..eeda87080 --- /dev/null +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32F103XC_FLASH.ld +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s + +# For flash-jlink target +JLINK_DEVICE = stm32f103rc + +# flash target ROM bootloader +flash: flash-jlink diff --git a/hw/bsp/stm32f1/boards/stm32f103bluepill/STM32F103X8_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103bluepill/STM32F103X8_FLASH.ld new file mode 100644 index 000000000..ca1804905 --- /dev/null +++ b/hw/bsp/stm32f1/boards/stm32f103bluepill/STM32F103X8_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** +** File : STM32F103XB_FLASH.ld +** +** Abstract : Linker script for STM32F103xB Device with +** 128KByte FLASH, 20KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004FFF; /* end of RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f1/boards/stm32f103bluepill/STM32F103XB_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103bluepill/STM32F103XB_FLASH.ld deleted file mode 100644 index 4be9df61b..000000000 --- a/hw/bsp/stm32f1/boards/stm32f103bluepill/STM32F103XB_FLASH.ld +++ /dev/null @@ -1,167 +0,0 @@ -/* -***************************************************************************** -** -** File : STM32F103XB_FLASH.ld -** -** Abstract : Linker script for STM32F103xB Device with -** 128KByte FLASH, 20KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004FFF; /* end of RAM */ - -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/stm32f1/boards/stm32f103bluepill/board.mk b/hw/bsp/stm32f1/boards/stm32f103bluepill/board.mk index 1f8564c1a..9c690ca7e 100644 --- a/hw/bsp/stm32f1/boards/stm32f103bluepill/board.mk +++ b/hw/bsp/stm32f1/boards/stm32f103bluepill/board.mk @@ -1,7 +1,7 @@ CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U # All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/STM32F103XB_FLASH.ld +LD_FILE = $(BOARD_PATH)/STM32F103X8_FLASH.ld SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s # For flash-jlink target diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c index d4ae098b2..8fcf9ebd6 100644 --- a/hw/bsp/stm32f1/family.c +++ b/hw/bsp/stm32f1/family.c @@ -75,14 +75,14 @@ void board_init(void) GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitStruct.Pin = LED_PIN; GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Pull = LED_STATE_ON ? GPIO_PULLDOWN : GPIO_PULLUP; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); // Button GPIO_InitStruct.Pin = BUTTON_PIN; GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); -- cgit v1.3.1 From b6cda41dafe51dd7d7a28c8b9473929bfe36c933 Mon Sep 17 00:00:00 2001 From: MasterPhi Date: Tue, 7 Sep 2021 12:32:27 +0200 Subject: Add doc for IAR. --- docs/reference/getting_started.rst | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'docs/reference') diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 5f3227927..be2e1b5ea 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -151,3 +151,39 @@ Some board use uf2 bootloader for drag & drop in to mass storage device, uf2 can .. code-block:: $ make BOARD=feather_nrf52840_express all uf2 + +IAR Support +----------- + +IAR Project Connection files are provided to import TinyUSB stack into your project. + +* A buldable project of your MCU need to be created in advance. + + + * Take example of STM32F0: + + - You need `stm32l0xx.h`, `startup_stm32f0xx.s`, `system_stm32f0xx.c`. + + - `STM32L0xx_HAL_Driver` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. + +* Open `Tools -> Configure Custom Argument Variables` (Switch to `Global` tab if you want to do it for all your projects) + Click `New Group ...`, name it to `TUSB`, Click `Add Variable ...`, name it to `TUSB_DIR`, change it's value to the path of your TinyUSB stack, + for example `C:\\tinyusb` + +Import stack only +^^^^^^^^^^^^^^^^^ + +1. Open `Project -> Add project Connection ...`, click `OK`, choose `tinyusb\\tools\\iar_template.ipcf`. + +Run examples +^^^^^^^^^^^^ + +1. (Python3 is needed) Run `iar_gen.py` to generate .ipcf files of examples: + + .. code-block:: + + cd C:\tinyusb\tools + python iar_gen.py + +2. Open `Project -> Add project Connection ...`, click `OK`, choose `tinyusb\\examples\\(.ipcf of example)`. + For example `C:\\tinyusb\\examples\\device\\cdc_msc\\iar_cdc_msc.ipcf` -- cgit v1.3.1 From e06a632b72aa926473375a2ed97d142196429d7f Mon Sep 17 00:00:00 2001 From: kkitayam <45088311+kkitayam@users.noreply.github.com> Date: Sat, 28 Aug 2021 23:55:41 +0900 Subject: Update Renesas RX --- docs/reference/supported.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 4c7d753c2..d114d8405 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -84,9 +84,9 @@ Supported MCUs +--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ | Raspberry Pi | RP2040 | |:green_square:| | |:x:| | |:green_square:| | | | +--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| Renesas | RX63N | | | | | | +| Renesas | RX63N | |:green_square:| | | |:green_square:| | |:x:| | | | +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | RX65N | | | | | | +| | RX65N | |:green_square:| | | |:green_square:| | |:x:| | | +--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ | Silabs | EFM32GG12 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | #750 | +--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -- cgit v1.3.1 From 43aac7074be0d14e72cb04eaddcddf1a926c6a74 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Mon, 13 Sep 2021 22:16:34 +0700 Subject: Update supported.rst --- docs/reference/supported.rst | 1 + 1 file changed, 1 insertion(+) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index d114d8405..daf5bce75 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -316,6 +316,7 @@ ST STM32 - `STM32 F411ce Black Pill `__ - `STM32 F411ve Discovery `__ - `STM32 F412zg Discovery `__ +- `STM32 F412zg Nucleo `__ - `STM32 F723e Discovery `__ - `STM32 F746zg Nucleo `__ - `STM32 F746g Discovery `__ -- cgit v1.3.1 From 1d5bdf7d396afe22b114f6f8edf45cbc3d88325b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 29 Sep 2021 16:29:15 +0700 Subject: add same7x to board list --- docs/reference/supported.rst | 6 ++++++ src/class/vendor/vendor_device.c | 2 ++ 2 files changed, 8 insertions(+) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index daf5bce75..c8a441f18 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -175,6 +175,12 @@ SAMD51 & SAME54 - `D5035-01 `__ - `Microchip SAME54 Xplained Pro `__ +SAME7x +^^^^^^ + +- `Microchip SAME70 Xplained `_ +- `QMTECH ATSAME70N19 `_ + SAMG ^^^^ diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index 188b561d7..8f25141b8 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -207,6 +207,8 @@ uint16_t vendord_open(uint8_t rhport, tusb_desc_interface_t const * desc_itf, ui // Open endpoint pair with usbd helper TU_ASSERT(usbd_open_edpt_pair(rhport, p_desc, desc_itf->bNumEndpoints, TUSB_XFER_BULK, &p_vendor->ep_out, &p_vendor->ep_in), 0); + drv_len += desc_itf->bNumEndpoints*sizeof(tusb_desc_endpoint_t); + // Prepare for incoming data if ( p_vendor->ep_out ) { -- cgit v1.3.1 From b26cc2cc4694d883cc060c03c57d201753b4c72a Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Wed, 13 Oct 2021 00:57:45 +0700 Subject: Add linkermap for size analysis (#1136) * add NO_LTO option to make * add linkermap submodule and linkermap target * add linkermap to ci build * linkermap doesn't work with esp32sx map file yet * add note for linkermap target --- .github/workflows/build.yml | 14 ++++++++++++++ .github/workflows/build_esp.yml | 14 ++++++++++++++ .github/workflows/build_msp430.yml | 14 ++++++++++++++ .github/workflows/build_renesas.yml | 14 ++++++++++++++ .github/workflows/build_riscv.yml | 14 ++++++++++++++ docs/reference/getting_started.rst | 15 ++++++++++++--- examples/rules.mk | 31 +++++++++++++++++++++---------- hw/bsp/esp32s2/family.mk | 5 +---- 8 files changed, 104 insertions(+), 17 deletions(-) (limited to 'docs/reference') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 1ef0bf5ea..b16cf3f87 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -66,6 +66,12 @@ jobs: - name: Checkout common submodules in lib run: git submodule update --init lib/FreeRTOS-Kernel lib/lwip lib/sct_neopixel + - name: Checkout hathach/linkermap + uses: actions/checkout@v2 + with: + repository: hathach/linkermap + path: linkermap + - name: Checkout pico-sdk if: matrix.family == 'rp2040' run: | @@ -95,6 +101,14 @@ jobs: - name: Build run: python3 tools/build_family.py ${{ matrix.family }} + - name: Linker Map + run: | + pip install linkermap/ + for ex in `ls -d examples/device/*/`; do \ + find ${ex} -name *.map -print -quit | \ + xargs -I % sh -c 'echo "::group::%"; linkermap -v %; echo "::endgroup::"'; \ + done + # --------------------------------------- # Build all no-family (opharned) boards # --------------------------------------- diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 93d582361..15071b178 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -30,5 +30,19 @@ jobs: - name: Checkout TinyUSB uses: actions/checkout@v2 + - name: Checkout hathach/linkermap + uses: actions/checkout@v2 + with: + repository: hathach/linkermap + path: linkermap + - name: Build run: docker run --rm -v $PWD:/project -w /project espressif/idf:latest python3 tools/build_esp32sx.py ${{ matrix.board }} + + - name: Linker Map + run: | + pip install linkermap/ + for ex in `ls -d examples/device/*/`; do \ + find ${ex} -maxdepth 3 -name *.map -print -quit | \ + xargs -I % sh -c 'echo "::group::%"; linkermap -v %; echo "::endgroup::"'; \ + done diff --git a/.github/workflows/build_msp430.yml b/.github/workflows/build_msp430.yml index ff2ce72c9..98dc36cd9 100644 --- a/.github/workflows/build_msp430.yml +++ b/.github/workflows/build_msp430.yml @@ -26,6 +26,12 @@ jobs: - name: Checkout common submodules in lib run: git submodule update --init lib/FreeRTOS-Kernel lib/lwip + - name: Checkout hathach/linkermap + uses: actions/checkout@v2 + with: + repository: hathach/linkermap + path: linkermap + - name: Set Toolchain URL run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 @@ -48,3 +54,11 @@ jobs: - name: Build run: python3 tools/build_family.py ${{ matrix.family }} + + - name: Linker Map + run: | + pip install linkermap/ + for ex in `ls -d examples/device/*/`; do \ + find ${ex} -name *.map -print -quit | \ + xargs -I % sh -c 'echo "::group::%"; linkermap -v %; echo "::endgroup::"'; \ + done diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index ee9ba8289..6eb042d72 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -26,6 +26,12 @@ jobs: - name: Checkout common submodules in lib run: git submodule update --init lib/FreeRTOS-Kernel lib/lwip + - name: Checkout hathach/linkermap + uses: actions/checkout@v2 + with: + repository: hathach/linkermap + path: linkermap + - name: Set Toolchain URL run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://gcc-renesas.com/downloads/get.php?f=rx/8.3.0.202004-gnurx/gcc-8.3.0.202004-GNURX-ELF.run @@ -49,3 +55,11 @@ jobs: - name: Build run: python3 tools/build_family.py ${{ matrix.family }} + + - name: Linker Map + run: | + pip install linkermap/ + for ex in `ls -d examples/device/*/`; do \ + find ${ex} -name *.map -print -quit | \ + xargs -I % sh -c 'echo "::group::%"; linkermap -v %; echo "::endgroup::"'; \ + done diff --git a/.github/workflows/build_riscv.yml b/.github/workflows/build_riscv.yml index 78510751c..0c7b2d154 100644 --- a/.github/workflows/build_riscv.yml +++ b/.github/workflows/build_riscv.yml @@ -27,6 +27,12 @@ jobs: - name: Checkout common submodules in lib run: git submodule update --init lib/FreeRTOS-Kernel lib/lwip + - name: Checkout hathach/linkermap + uses: actions/checkout@v2 + with: + repository: hathach/linkermap + path: linkermap + - name: Set Toolchain URL run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz @@ -49,3 +55,11 @@ jobs: - name: Build run: python3 tools/build_family.py ${{ matrix.family }} + + - name: Linker Map + run: | + pip install linkermap/ + for ex in `ls -d examples/device/*/`; do \ + find ${ex} -name *.map -print -quit | \ + xargs -I % sh -c 'echo "::group::%"; linkermap -v %; echo "::endgroup::"'; \ + done diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index be2e1b5ea..044792993 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -89,6 +89,15 @@ A MCU can support multiple operational speed. By default, the example build syst $ make BOARD=stm32f746disco SPEED=full all +Size Analysis +~~~~~~~~~~~~~ + +First install `linkermap tool `_ then ``linkermap`` target can be used to analyze code size. You may want to compile with ``NO_LTO=1`` since -flto merges code across .o files and make it difficult to analyze. + +.. code-block:: + + $ make BOARD=feather_nrf52840_express NO_LTO=1 all linkermap + Debug ^^^^^ @@ -153,7 +162,7 @@ Some board use uf2 bootloader for drag & drop in to mass storage device, uf2 can $ make BOARD=feather_nrf52840_express all uf2 IAR Support ------------ +^^^^^^^^^^^ IAR Project Connection files are provided to import TinyUSB stack into your project. @@ -171,12 +180,12 @@ IAR Project Connection files are provided to import TinyUSB stack into your proj for example `C:\\tinyusb` Import stack only -^^^^^^^^^^^^^^^^^ +~~~~~~~~~~~~~~~~~ 1. Open `Project -> Add project Connection ...`, click `OK`, choose `tinyusb\\tools\\iar_template.ipcf`. Run examples -^^^^^^^^^^^^ +~~~~~~~~~~~~ 1. (Python3 is needed) Run `iar_gen.py` to generate .ipcf files of examples: diff --git a/examples/rules.mk b/examples/rules.mk index 7e494b3d8..92fa4e14d 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -5,12 +5,11 @@ # Set all as default goal .DEFAULT_GOAL := all -# ESP32-SX and RP2040 has its own CMake build system -ifneq ($(FAMILY),esp32s2) -ifneq ($(FAMILY),esp32s3) -ifneq ($(FAMILY),rp2040) +# ESP32-Sx and RP2040 has its own CMake build system +ifeq (,$(findstring $(FAMILY),esp32s2 esp32s3 rp2040)) + # --------------------------------------- -# GNU Make build system +# Compiler Flags # --------------------------------------- # libc @@ -44,6 +43,12 @@ INC += $(TOP)/src CFLAGS += $(addprefix -I,$(INC)) +# LTO makes it difficult to analyze map file for optimizing size purpose +# We will run this option in ci +ifeq ($(NO_LTO),1) +CFLAGS := $(filter-out -flto,$(CFLAGS)) +endif + LDFLAGS += $(CFLAGS) -Wl,-T,$(TOP)/$(LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections ifneq ($(SKIP_NANOLIB), 1) LDFLAGS += -specs=nosys.specs -specs=nano.specs @@ -67,6 +72,10 @@ $(info LDFLAGS $(LDFLAGS)) $(info ) $(info ASFLAGS $(ASFLAGS)) $(info ) endif +# --------------------------------------- +# Rules +# --------------------------------------- + all: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex size uf2: $(BUILD)/$(PROJECT).uf2 @@ -126,11 +135,17 @@ $(BUILD)/obj/%_asm.o: %.S @echo AS $(notdir $@) @$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< +endif # GNU Make + size: $(BUILD)/$(PROJECT).elf -@echo '' @$(SIZE) $< -@echo '' +# linkermap must be install previously at https://github.com/hathach/linkermap +linkermap: $(BUILD)/$(PROJECT).elf + @linkermap -v $<.map + .PHONY: clean clean: ifeq ($(CMDEXE),1) @@ -139,10 +154,6 @@ else $(RM) -rf $(BUILD) endif -endif -endif -endif # GNU Make - # --------------------------------------- # Flash Targets # --------------------------------------- @@ -204,4 +215,4 @@ copy-artifact: $(BIN) # Print out the value of a make variable. # https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile print-%: - @echo $* = $($*) + @echo $* = $($*) \ No newline at end of file diff --git a/hw/bsp/esp32s2/family.mk b/hw/bsp/esp32s2/family.mk index fb9b21641..4b9000a6a 100644 --- a/hw/bsp/esp32s2/family.mk +++ b/hw/bsp/esp32s2/family.mk @@ -7,14 +7,11 @@ all: build: all -clean: - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) clean - fullclean: if test -f sdkconfig; then $(RM) -f sdkconfig ; fi if test -d $(BUILD); then $(RM) -rf $(BUILD) ; fi -flash bootloader-flash app-flash erase monitor dfu-flash dfu: +clean flash bootloader-flash app-flash erase monitor dfu-flash dfu size size-components size-files: idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) $@ uf2: $(BUILD)/$(PROJECT).uf2 -- cgit v1.3.1 From 5cfe2930012d1dbec85e0923e0eda2d9aec867e6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Oct 2021 17:31:57 +0700 Subject: update changelog and increase version for 0.12.0 --- CONTRIBUTORS.rst | 3 +-- docs/info/changelog.rst | 33 ++++++++++++++++++++++++++++++++- docs/reference/getting_started.rst | 2 +- src/tusb_option.h | 2 +- 4 files changed, 35 insertions(+), 5 deletions(-) (limited to 'docs/reference') diff --git a/CONTRIBUTORS.rst b/CONTRIBUTORS.rst index 121d37789..55a291222 100644 --- a/CONTRIBUTORS.rst +++ b/CONTRIBUTORS.rst @@ -177,8 +177,7 @@ Notable contributors - Add new DCD port for Synopsys DesignWare for STM32 L4, F2, F4, F7, H7 etc ... - Add new DCD port for TI MSP430 -- Board support for STM32F407 Discovery, STM32H743 Nucleo, pyboard - v1.1, msp\_exp430f5529lp etc ... +- Board support for STM32F407 Discovery, STM32H743 Nucleo, pyboard v1.1, msp\_exp430f5529lp etc ... `Zixun Li `__ diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index 4325ff2ca..4cb30799c 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -2,6 +2,37 @@ Changelog ********* +0.12.0 +====== + +- add CFG_TUSB_OS_INC_PATH for os include path + +Device Controller Driver (DCD) +------------------------------ + +- Getting device stack to pass USB Compliance Verification test (chapter9, HID, MSC). Ports are tested: + nRF, SAMD 21/51, rp2040, stm32f4, Renesas RX, iMXRT, ESP32-S2/3, Kinetic KL25/32 +- Added dcd_edpt_close_all() for switching configuration +- [Transdimension] Support dcd_edpt_xfer_fifo() with auto wrap over if fifo buffer is 4K aligned and size is multiple of 4K. +- [Da146xx] Improve vbus, reset, suspend, resume detection, and remote wakeup. + +Device Stack +------------ + +- Add new network driver Network Control Model (CDC-NCM), update net_lwip_webserver to work with NCM (need re-configure example) +- Add new USB Video Class UVC 1.5 driver and video_capture example ((work in progress) +- Fix potential buffer overflow for HID, bluetooth drivers + +Host Controller Driver (HCD) +---------------------------- + +No notable changes + +Host Stack +---------- + +No notable changes + 0.11.0 (2021-08-29) =================== @@ -26,7 +57,7 @@ Synopsys ^^^^^^^^ - Fix Synopsys set address bug which could cause re-enumeration failed -- Fix for dcd_synopsys driver integer overflow in HS mode (issue #968) +- Fix dcd_synopsys driver integer overflow in HS mode (issue #968) nRF5x ^^^^^ diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 044792993..875372c81 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -122,7 +122,7 @@ Logger By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: -* `LOGGER=rtt`: use [Segger RTT protocol](https://www.segger.com/products/debug-probes/j-link/technology/about-real-time-transfer/) +* `LOGGER=rtt`: use `Segger RTT protocol `_ * Cons: requires jlink as the debugger. * Pros: work with most if not all MCUs diff --git a/src/tusb_option.h b/src/tusb_option.h index b2ebfdf66..e49fc0119 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -28,7 +28,7 @@ #define _TUSB_OPTION_H_ #define TUSB_VERSION_MAJOR 0 -#define TUSB_VERSION_MINOR 11 +#define TUSB_VERSION_MINOR 12 #define TUSB_VERSION_REVISION 0 #define TUSB_VERSION_STRING TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION) -- cgit v1.3.1 From 4431ced598ca8ee1f07d6acd7f1424f17755c155 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 2 Nov 2021 16:20:39 +0700 Subject: add L4 to ci, update doc --- .github/workflows/build.yml | 1 + README.rst | 2 +- docs/reference/supported.rst | 39 ++++++++++++++++++++++++++++++++++----- 3 files changed, 36 insertions(+), 6 deletions(-) (limited to 'docs/reference') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index b16cf3f87..53a1628a0 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -56,6 +56,7 @@ jobs: - 'stm32f4' - 'stm32f7' - 'stm32h7' + - 'stm32l4' steps: - name: Setup Python uses: actions/setup-python@v2 diff --git a/README.rst b/README.rst index 11804ccd1..329c0da53 100644 --- a/README.rst +++ b/README.rst @@ -47,7 +47,7 @@ The stack supports the following MCUs: - **Renesas:** RX63N, RX65N - **Silabs:** EFM32GG12 - **Sony:** CXD56 -- **ST:** STM32 series: L0, L1, F0, F1, F2, F3, F4, F7, H7 both FullSpeed and HighSpeed +- **ST:** STM32 series: L0, L1, L4, F0, F1, F2, F3, F4, F7, H7 both FullSpeed and HighSpeed - **TI:** MSP430 - **ValentyUSB:** eptri diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index c8a441f18..ef924adb4 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -305,29 +305,58 @@ Sony ST STM32 -------- -- `Adafruit Feather STM32F405 `__ -- `Micro Python PyBoard v1.1 `__ -- `STLink-V3 Mini `__ -- `STM32 L035c8 Discovery `__ -- `STM32 L4R5zi Nucleo `__ +F0 +^^ - `STM32 F070rb Nucleo `__ - `STM32 F072 Evaluation `__ - `STM32 F072rb Discovery `__ + +F1 +^^ - `STM32 F103c8 Blue Pill `__ - `STM32 F103rc Mini v2.0 `__ + +F2 +^^ - `STM32 F207zg Nucleo `__ + +F3 +^^ - `STM32 F303vc Discovery `__ + +F4 +^^ +- `Adafruit Feather STM32F405 `__ +- `Micro Python PyBoard v1.1 `__ - `STM32 F401cc Black Pill `__ - `STM32 F407vg Discovery `__ - `STM32 F411ce Black Pill `__ - `STM32 F411ve Discovery `__ - `STM32 F412zg Discovery `__ - `STM32 F412zg Nucleo `__ + +F7 +^^ + +- `STLink-V3 Mini `__ - `STM32 F723e Discovery `__ - `STM32 F746zg Nucleo `__ - `STM32 F746g Discovery `__ - `STM32 F767zi Nucleo `__ - `STM32 F769i Discovery `__ + +L0 +^^ +- `STM32 L035c8 Discovery `__ + +L4 +^^ +- `STM32 L476vg Discovery `__ +- `STM32 L4P5zg Nucleo `__ +- `STM32 L4R5zi Nucleo `__ + +H7 +^^ - `STM32 H743zi Nucleo `__ - `STM32 H743i Evaluation `__ - `STM32 H745i Discovery `__ -- cgit v1.3.1 From ec99bec8cba0ba948832c19641468558d59f6289 Mon Sep 17 00:00:00 2001 From: Rafael Silva Date: Thu, 4 Nov 2021 23:00:05 +0000 Subject: docs: update supported device table remove known issue #750 from silabs EFM32GG table entry --- docs/reference/supported.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index ef924adb4..1c3ef5a07 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -88,7 +88,7 @@ Supported MCUs | +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ | | RX65N | |:green_square:| | | |:green_square:| | |:x:| | | +--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| Silabs | EFM32GG12 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | #750 | +| Silabs | EFM32GG12 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ | Sony | CXD56 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | +--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ -- cgit v1.3.1 From 422f439bf73450b9f08ff6fb2bf961205ba1c5f5 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 5 Nov 2021 13:18:54 +0700 Subject: update docs --- README.rst | 1 + docs/reference/supported.rst | 8 ++++++++ 2 files changed, 9 insertions(+) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index 1db022fc8..60df78ca4 100644 --- a/README.rst +++ b/README.rst @@ -34,6 +34,7 @@ The stack supports the following MCUs: - **Dialog:** DA1469x - **Espressif:** ESP32-S2, ESP32-S3 +- **Infineon:** XMC4500 - **MicroChip:** SAMD11, SAMD21, SAMD51, SAME5x, SAMG55, SAML21, SAML22, SAME7x - **NordicSemi:** nRF52833, nRF52840, nRF5340 - **Nuvoton:** NUC120, NUC121/NUC125, NUC126, NUC505 diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index ef924adb4..95f3e1da9 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -149,6 +149,14 @@ Espressif ESP32-S2 - `ESP32-S2-Kaluga-1 `__ - `ESP32-S2-Saola-1 `__ +Infineon +--------- + +XMC4000 +^^^^^^^ + +- `XMC4500 Relax (Lite) Kit `__ + MicroChip --------- -- cgit v1.3.1 From 33506675c51e11f3b04cc7a0a4f11af244a0ba11 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Nov 2021 00:33:55 +0700 Subject: update supported doc --- README.rst | 10 +- docs/reference/supported.rst | 234 +++++++++++++++++++++++-------------------- 2 files changed, 131 insertions(+), 113 deletions(-) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index 60df78ca4..a8ce9399c 100644 --- a/README.rst +++ b/README.rst @@ -32,8 +32,10 @@ Supported MCUs The stack supports the following MCUs: +- **Broadcom:** BCM2837, BCM2711 - **Dialog:** DA1469x - **Espressif:** ESP32-S2, ESP32-S3 +- **GigaDevice:** GD32VF103 - **Infineon:** XMC4500 - **MicroChip:** SAMD11, SAMD21, SAMD51, SAME5x, SAMG55, SAML21, SAML22, SAME7x - **NordicSemi:** nRF52833, nRF52840, nRF5340 @@ -41,15 +43,15 @@ The stack supports the following MCUs: - **NXP:** - iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064 - - Kinetis: KL25, K32L2Bxx + - Kinetis: KL25, K32L2 - LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55 - **Raspberry Pi:** RP2040 -- **Renesas:** RX63N, RX65N +- **Renesas:** RX63N, RX65N, RX72N - **Silabs:** EFM32GG - **Sony:** CXD56 -- **ST:** STM32 series: L0, L1, L4, L4+, F0, F1, F2, F3, F4, F7, H7 -- **TI:** MSP430 +- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, L0, L1, L4, L4+ +- **TI:** MSP430, MSP432E4, TM4C123 - **ValentyUSB:** eptri Here is the list of `Supported Devices`_ that can be used with provided examples. diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 1d2b4db51..254a0d95d 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -11,117 +11,120 @@ Supported MCUs This table is a WIP! the data is not correct, tho if a device is listed, it likely works as a usb full speed device at the least. -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| Manufacturer | Family | Device | Host | FS | HS | Known Issues | -+==============+====================+===================+====================+===================+===================+==============+ -| Dialog | DA1469x | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| Espressif | ESP32-S2 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | ESP32-S3 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| MicroChip | SAMD11 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | SAMD21 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | SAMD51 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | SAME5x | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | SAMG55 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | SAML21 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | SAML22 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | SAME70,S70,V70,V71 | |:green_square:| | |:red_square:| | |:green_square:| | |:green_square:| | | -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| NordicSemi | nRF52833 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | nRF52840 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| Nuvoton | NUC120 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | NUC121/NUC125 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | NUC126 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | NUC505 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -+--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| NXP | iMX | RT1011 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | RT1015 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | RT1021 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | RT1052 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | RT1062 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | RT1064 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | -| +-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | Kinetis KL25 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| +-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | LPC | 11u | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | 13 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | 15 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | 17 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | 18 | | |:yellow_square:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | 40 | | |:x:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | 43 | |:green_square:| | |:yellow_square:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | 51u | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | 54 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | 55 | |:green_square:| | |:x:| | |:green_square:| | | | -+--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| Raspberry Pi | RP2040 | |:green_square:| | |:x:| | |:green_square:| | | | -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| Renesas | RX63N | |:green_square:| | | |:green_square:| | |:x:| | | -| +--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | RX65N | |:green_square:| | | |:green_square:| | |:x:| | | -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| Silabs | EFM32GG12 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| Sony | CXD56 | |:green_square:| | |:x:| | |:green_square:| | |:x:| | | -+--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| ST | STM32 | L0 | |:green_square:| | | |:green_square:| | | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | F0 | |:green_square:| | | |:green_square:| | | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | F1 | |:green_square:| | | |:green_square:| | | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | F2 | |:green_square:| | | |:green_square:| | | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | F3 | |:green_square:| | | |:green_square:| | | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | F4 | |:green_square:| | | |:green_square:| | | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | F7 | |:green_square:| | | |:green_square:| | | | -| | +------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| | | H7 | |:green_square:| | | |:green_square:| | |:green_square:| | | -+--------------+-------+------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| TI | MSP430 | |:green_square:| | | |:green_square:| | | | -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ -| ValentyUSB | eptri | |:green_square:| | | |:green_square:| | | | -+--------------+--------------------+-------------------+--------------------+-------------------+-------------------+--------------+ ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | ++==============+=======================+======================+======================+======================+=================+==============+ +| Broadcom | BCM2711, BCM2837 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| Dialog | DA1469x | |:heavy_check_mark:| | |:x:| | |:x:| | da146xx | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| Espressif | ESP32 S2, S3 | |:heavy_check_mark:| | | |:x:| | dwc2 or esp32sx | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| GigaDevice | GD32VF103 | |:heavy_check_mark:| | | |:x:| | dwc2 | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| Infineon | XMC4500 | |:heavy_check_mark:| | | |:x:| | dwc2 | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| MicroChip | SAM D11, D21 | |:heavy_check_mark:| | | |:x:| | samd | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | SAM D51, E5x | |:heavy_check_mark:| | | |:x:| | samd | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | SAM G55 | |:heavy_check_mark:| | | |:x:| | samg | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | SAM L21, L22 | |:heavy_check_mark:| | | |:x:| | samd | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | SAM E70,S70,V70,V71 | |:heavy_check_mark:| | | |:heavy_check_mark:| | samx7x | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| NordicSemi | nRF52833, nRF52840 | |:heavy_check_mark:| | |:x:| | |:x:| | nrf5x | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | nRF5340 | |:heavy_check_mark:| | |:x:| | |:x:| | nrf5x | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| Nuvoton | NUC120 | |:heavy_check_mark:| | |:x:| | |:x:| | | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | NUC121/NUC125 | |:heavy_check_mark:| | |:x:| | |:x:| | | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | NUC126 | |:heavy_check_mark:| | |:x:| | |:x:| | | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | NUC505 | |:heavy_check_mark:| | | |:heavy_check_mark:| | | | ++--------------+---------+-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| NXP | iMXRT | RT1011 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | RT1015 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | RT1021 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | RT1052 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | RT1062 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | RT1064 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | +| +---------+-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | Kinetis | KL25 | |:heavy_check_mark:| | | |:x:| | | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | K32L2 | |:heavy_check_mark:| | | |:x:| | | | +| +---------+-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | LPC | 11u, 13, 15 | |:heavy_check_mark:| | |:x:| | |:x:| | lpc_ip3511 | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | 17, 40 | |:heavy_check_mark:| | |:construction:| | |:x:| | lpc17_40 | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | 18, 43 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:x:| | | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | 51u | |:heavy_check_mark:| | |:x:| | |:x:| | lpc_ip3511 | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | 54 | |:heavy_check_mark:| | | |:heavy_check_mark:| | lpc_ip3511 | | +| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | 55 | |:heavy_check_mark:| | | |:heavy_check_mark:| | lpc_ip3511 | | ++--------------+---------+-------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| Raspberry Pi | RP2040 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:x:| | rp2040 | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| Renesas | RX 63N, 65N, 72N | |:heavy_check_mark:| | |:x:| | |:x:| | usba | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| Silabs | EFM32GG12 | |:heavy_check_mark:| | | |:x:| | dwc2 | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| Sony | CXD56 | |:heavy_check_mark:| | |:x:| | |:heavy_check_mark:| | cxd56 | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| ST STM32 | F0 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | +| +----+------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | F1 | 102, 103 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | +| | +------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | 105, 107 | |:heavy_check_mark:| | | |:x:| | dwc2 | | +| +----+------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | F2 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | F3 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | F4 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | F7 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | H7 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | L0, L1 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | +| +----+------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | L4 | 4x2, 4x3 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | +| | +------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | | 4x5, 4x6 | |:heavy_check_mark:| | | | dwc2 | | +| +----+------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | L4+ | |:heavy_check_mark:| | | | dwc2 | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | U5 | |:construction:| | | | dwc2 | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| TI | MSP430 | |:heavy_check_mark:| | |:x:| | |:x:| | msp430x5xx | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | MSP432E4 | |:heavy_check_mark:| | | |:x:| | musb | | +| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| | TM4C123 | |:heavy_check_mark:| | | |:x:| | musb | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ +| ValentyUSB | eptri | |:heavy_check_mark:| | |:x:| | |:x:| | eptri | | ++--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ Table Legend ------------ -================= =================== -|:x:| Not available -|:red_square:| Not supported -|:yellow_square:| WIP/partial support -|:green_square:| Supported -================= =================== +==================== =================== +|:heavy_check_mark:| Supported +|:construction:| WIP/partial support +|:x:| Not supported +==================== =================== Supported Boards ================ @@ -134,6 +137,11 @@ The board support code is only used for self-contained examples and testing. It The following boards are supported (sorted alphabetically): +Broadcom +-------- + +- `Raspberry Pi CM4 `__ + Dialog DA146xx -------------- @@ -143,12 +151,17 @@ Dialog DA146xx Espressif ESP32-S2 ------------------ -- Adafruit Feather ESP32-S2 +- `Adafruit Feather ESP32-S2 `__ - `Adafruit Magtag 2.9" E-Ink WiFi Display `__ - `Adafruit Metro ESP32-S2 `__ - `ESP32-S2-Kaluga-1 `__ - `ESP32-S2-Saola-1 `__ +GigaDevice +---------- + +- `Sipeed Longan Nano `__ + Infineon --------- @@ -243,7 +256,8 @@ iMX RT Kinetis ^^^^^^^ -- `FRDM-KL25Z `__ +- `Freedom FRDM-KL25Z `__ +- `Freedom FRDM-K32L2B3 `__ LPC 11-13-15 ^^^^^^^^^^^^ @@ -374,6 +388,8 @@ TI -- - `MSP430F5529 USB LaunchPad Evaluation Kit `__ +- `MSP-EXP432E401Y LaunchPad Evaluation Kit `__ +- `TM4C123GXL LaunchPad Evaluation Kit `__ Tomu ---- -- cgit v1.3.1 From 4678a4142e8dff8c0c7b959dd6862eeb9e9d62f1 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Nov 2021 00:35:39 +0700 Subject: remove warnings --- docs/reference/supported.rst | 5 ----- 1 file changed, 5 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 254a0d95d..dfaffe6e3 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -6,11 +6,6 @@ Supported Devices Supported MCUs ============== -.. admonition:: Warning - :class: warning - - This table is a WIP! the data is not correct, tho if a device is listed, it likely works as a usb full speed device at the least. - +--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ | Manufacturer | Family | Device | Host | Highspeed | Driver | Note | +==============+=======================+======================+======================+======================+=================+==============+ -- cgit v1.3.1 From eae4132fbb216329e9a0d8b624baf1c5aad56359 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 Dec 2021 11:31:27 +0700 Subject: update supported doc --- docs/reference/supported.rst | 212 +++++++++++++++++++++---------------------- 1 file changed, 101 insertions(+), 111 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index dfaffe6e3..83cf874da 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -2,124 +2,114 @@ Supported Devices ***************** - Supported MCUs ============== -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | -+==============+=======================+======================+======================+======================+=================+==============+ -| Broadcom | BCM2711, BCM2837 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| Dialog | DA1469x | |:heavy_check_mark:| | |:x:| | |:x:| | da146xx | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| Espressif | ESP32 S2, S3 | |:heavy_check_mark:| | | |:x:| | dwc2 or esp32sx | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| GigaDevice | GD32VF103 | |:heavy_check_mark:| | | |:x:| | dwc2 | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| Infineon | XMC4500 | |:heavy_check_mark:| | | |:x:| | dwc2 | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| MicroChip | SAM D11, D21 | |:heavy_check_mark:| | | |:x:| | samd | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | SAM D51, E5x | |:heavy_check_mark:| | | |:x:| | samd | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | SAM G55 | |:heavy_check_mark:| | | |:x:| | samg | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | SAM L21, L22 | |:heavy_check_mark:| | | |:x:| | samd | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | SAM E70,S70,V70,V71 | |:heavy_check_mark:| | | |:heavy_check_mark:| | samx7x | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| NordicSemi | nRF52833, nRF52840 | |:heavy_check_mark:| | |:x:| | |:x:| | nrf5x | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | nRF5340 | |:heavy_check_mark:| | |:x:| | |:x:| | nrf5x | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| Nuvoton | NUC120 | |:heavy_check_mark:| | |:x:| | |:x:| | | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | NUC121/NUC125 | |:heavy_check_mark:| | |:x:| | |:x:| | | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | NUC126 | |:heavy_check_mark:| | |:x:| | |:x:| | | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | NUC505 | |:heavy_check_mark:| | | |:heavy_check_mark:| | | | -+--------------+---------+-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| NXP | iMXRT | RT1011 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | RT1015 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | RT1021 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | RT1052 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | RT1062 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | RT1064 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:heavy_check_mark:| | | | -| +---------+-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | Kinetis | KL25 | |:heavy_check_mark:| | | |:x:| | | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | K32L2 | |:heavy_check_mark:| | | |:x:| | | | -| +---------+-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | LPC | 11u, 13, 15 | |:heavy_check_mark:| | |:x:| | |:x:| | lpc_ip3511 | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | 17, 40 | |:heavy_check_mark:| | |:construction:| | |:x:| | lpc17_40 | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | 18, 43 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:x:| | | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | 51u | |:heavy_check_mark:| | |:x:| | |:x:| | lpc_ip3511 | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | 54 | |:heavy_check_mark:| | | |:heavy_check_mark:| | lpc_ip3511 | | -| | +-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | 55 | |:heavy_check_mark:| | | |:heavy_check_mark:| | lpc_ip3511 | | -+--------------+---------+-------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| Raspberry Pi | RP2040 | |:heavy_check_mark:| | |:heavy_check_mark:| | |:x:| | rp2040 | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| Renesas | RX 63N, 65N, 72N | |:heavy_check_mark:| | |:x:| | |:x:| | usba | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| Silabs | EFM32GG12 | |:heavy_check_mark:| | | |:x:| | dwc2 | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| Sony | CXD56 | |:heavy_check_mark:| | |:x:| | |:heavy_check_mark:| | cxd56 | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| ST STM32 | F0 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | -| +----+------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | F1 | 102, 103 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | -| | +------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | 105, 107 | |:heavy_check_mark:| | | |:x:| | dwc2 | | -| +----+------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | F2 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | F3 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | F4 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | F7 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | H7 | |:heavy_check_mark:| | | |:heavy_check_mark:| | dwc2 | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | L0, L1 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | -| +----+------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | L4 | 4x2, 4x3 | |:heavy_check_mark:| | |:x:| | |:x:| | stm32_fsdev | | -| | +------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | | 4x5, 4x6 | |:heavy_check_mark:| | | | dwc2 | | -| +----+------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | L4+ | |:heavy_check_mark:| | | | dwc2 | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | U5 | |:construction:| | | | dwc2 | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| TI | MSP430 | |:heavy_check_mark:| | |:x:| | |:x:| | msp430x5xx | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | MSP432E4 | |:heavy_check_mark:| | | |:x:| | musb | | -| +-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| | TM4C123 | |:heavy_check_mark:| | | |:x:| | musb | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ -| ValentyUSB | eptri | |:heavy_check_mark:| | |:x:| | |:x:| | eptri | | -+--------------+-----------------------+----------------------+----------------------+----------------------+-----------------+--------------+ ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | ++==============+=======================+========+======+===========+===================+==============+ +| Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Espressif | ESP32 S2, S3 | ✔ | | ✖ | dwc2 or esp32sx | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Infineon | XMC4500 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| MicroChip | SAM D11, D21 | ✔ | | ✖ | samd | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | SAM D51, E5x | ✔ | | ✖ | samd | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | SAM G55 | ✔ | | ✖ | samg | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | SAM L21, L22 | ✔ | | ✖ | samd | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | SAM E70,S70,V70,V71 | ✔ | | ✔ | samx7x | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| NordicSemi | nRF52833, nRF52840 | ✔ | ✖ | ✖ | nrf5x | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | nRF5340 | ✔ | ✖ | ✖ | nrf5x | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Nuvoton | NUC120 | ✔ | ✖ | ✖ | | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | NUC121/NUC125 | ✔ | ✖ | ✖ | | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | NUC126 | ✔ | ✖ | ✖ | | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | NUC505 | ✔ | | ✔ | | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| NXP | iMXRT | RT10xx | ✔ | ✔ | ✔ | ci_hs | | +| +---------+-------------+--------+------+-----------+-------------------+--------------+ +| | Kinetis | KL25 | ✔ | | ✖ | | | +| | +-------------+--------+------+-----------+-------------------+--------------+ +| | | K32L2 | ✔ | | ✖ | | | +| +---------+-------------+--------+------+-----------+-------------------+--------------+ +| | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------+--------+------+-----------+-------------------+--------------+ +| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40 | | +| | +-------------+--------+------+-----------+-------------------+--------------+ +| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs | | +| | +-------------+--------+------+-----------+-------------------+--------------+ +| | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------+--------+------+-----------+-------------------+--------------+ +| | | 54 | ✔ | | ✔ | lpc_ip3511 | | +| | +-------------+--------+------+-----------+-------------------+--------------+ +| | | 55 | ✔ | | ✔ | lpc_ip3511 | | ++--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ +| Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040 | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Renesas | RX 63N, 65N, 72N | ✔ | ✖ | ✖ | usba | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| ST STM32 | F0 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------+--------+------+-----------+-------------------+--------------+ +| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | +------------------+--------+------+-----------+-------------------+--------------+ +| | | 105, 107 | ✔ | | ✖ | dwc2 | | +| +----+------------------+--------+------+-----------+-------------------+--------------+ +| | F2 | ✔ | | ✔ | dwc2 | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | F3 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | F4 | ✔ | | ✔ | dwc2 | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | F7 | ✔ | | ✔ | dwc2 | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | H7 | ✔ | | ✔ | dwc2 | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | L0, L1 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------+--------+------+-----------+-------------------+--------------+ +| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | +------------------+--------+------+-----------+-------------------+--------------+ +| | | 4x5, 4x6 | ✔ | | | dwc2 | | +| +----+------------------+--------+------+-----------+-------------------+--------------+ +| | L4+ | ✔ | | | dwc2 | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | U5 | ⚠ | | | dwc2 | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | MSP432E4 | ✔ | | ✖ | musb | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | TM4C123 | ✔ | | ✖ | musb | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ + Table Legend ------------ -==================== =================== -|:heavy_check_mark:| Supported -|:construction:| WIP/partial support -|:x:| Not supported -==================== =================== += =================== +✔ Supported +⚠ WIP/partial support +✖ Not supported += =================== Supported Boards ================ -- cgit v1.3.1 From 94c35de0d2632574b8833a3310082a7e25aa6dd2 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 Dec 2021 13:19:27 +0700 Subject: minor doc update --- docs/reference/supported.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 83cf874da..e3cb8c679 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -39,7 +39,7 @@ Supported MCUs | | NUC126 | ✔ | ✖ | ✖ | | | | +-----------------------+--------+------+-----------+-------------------+--------------+ | | NUC505 | ✔ | | ✔ | | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ ++--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | NXP | iMXRT | RT10xx | ✔ | ✔ | ✔ | ci_hs | | | +---------+-------------+--------+------+-----------+-------------------+--------------+ | | Kinetis | KL25 | ✔ | | ✖ | | | -- cgit v1.3.1 From 69bdd703c20e4a61892dc2ef217d14700b29dc46 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 13 Dec 2021 17:53:38 +0700 Subject: update doc to include g4 --- README.rst | 2 +- docs/reference/supported.rst | 20 +++++++++++++------- 2 files changed, 14 insertions(+), 8 deletions(-) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index a8ce9399c..03219db3f 100644 --- a/README.rst +++ b/README.rst @@ -50,7 +50,7 @@ The stack supports the following MCUs: - **Renesas:** RX63N, RX65N, RX72N - **Silabs:** EFM32GG - **Sony:** CXD56 -- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, L0, L1, L4, L4+ +- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G4, L0, L1, L4, L4+ - **TI:** MSP430, MSP432E4, TM4C123 - **ValentyUSB:** eptri diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index e3cb8c679..a63582dd4 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -82,6 +82,8 @@ Supported MCUs | +-----------------------+--------+------+-----------+-------------------+--------------+ | | H7 | ✔ | | ✔ | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ +| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ | | L0, L1 | ✔ | ✖ | ✖ | stm32_fsdev | | | +----+------------------+--------+------+-----------+-------------------+--------------+ | | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | @@ -352,6 +354,17 @@ F7 - `STM32 F767zi Nucleo `__ - `STM32 F769i Discovery `__ +H7 +^^ +- `STM32 H743zi Nucleo `__ +- `STM32 H743i Evaluation `__ +- `STM32 H745i Discovery `__ +- `Waveshare OpenH743I-C `__ + +G4 +^^ +- `STM32 G474RE Nucleo `__ + L0 ^^ - `STM32 L035c8 Discovery `__ @@ -362,13 +375,6 @@ L4 - `STM32 L4P5zg Nucleo `__ - `STM32 L4R5zi Nucleo `__ -H7 -^^ -- `STM32 H743zi Nucleo `__ -- `STM32 H743i Evaluation `__ -- `STM32 H745i Discovery `__ -- `Waveshare OpenH743I-C `__ - TI -- -- cgit v1.3.1 From 469ecdd28c0968fc15fe1d69b943d325d9b89d67 Mon Sep 17 00:00:00 2001 From: Greg Steiert Date: Wed, 15 Dec 2021 14:18:27 -0800 Subject: added KUIIC to supported boards list --- docs/reference/supported.rst | 1 + 1 file changed, 1 insertion(+) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index a63582dd4..b8f3ac30d 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -245,6 +245,7 @@ Kinetis - `Freedom FRDM-KL25Z `__ - `Freedom FRDM-K32L2B3 `__ +- `KUIIC `__ LPC 11-13-15 ^^^^^^^^^^^^ -- cgit v1.3.1 From 6de423606fc9d512efb830b198c76f095a182a1c Mon Sep 17 00:00:00 2001 From: Alex Voinea Date: Tue, 21 Dec 2021 18:24:05 +0100 Subject: nucleo-f439zi support --- docs/reference/supported.rst | 1 + .../boards/stm32f439nucleo/STM32F439ZITX_FLASH.ld | 206 +++++++++ hw/bsp/stm32f4/boards/stm32f439nucleo/board.h | 108 +++++ hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk | 11 + .../boards/stm32f439nucleo/stm32f4xx_hal_conf.h | 486 +++++++++++++++++++++ 5 files changed, 812 insertions(+) create mode 100644 hw/bsp/stm32f4/boards/stm32f439nucleo/STM32F439ZITX_FLASH.ld create mode 100644 hw/bsp/stm32f4/boards/stm32f439nucleo/board.h create mode 100644 hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk create mode 100644 hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index b8f3ac30d..4dd172dbe 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -344,6 +344,7 @@ F4 - `STM32 F411ve Discovery `__ - `STM32 F412zg Discovery `__ - `STM32 F412zg Nucleo `__ +- `STM32 F439zg Nucleo `__ F7 ^^ diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/STM32F439ZITX_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f439nucleo/STM32F439ZITX_FLASH.ld new file mode 100644 index 000000000..2dc277c77 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/STM32F439ZITX_FLASH.ld @@ -0,0 +1,206 @@ +/* +****************************************************************************** +** +** @file : LinkerScript.ld +** +** @author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for NUCLEO-F439ZI Board embedding STM32F439ZITx Device from stm32f4 series +** 2048Kbytes FLASH +** 64Kbytes CCMRAM +** 192Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +****************************************************************************** +** @attention +** +** Copyright (c) 2021 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + CCMRAM (xrw) : ORIGIN = 0x10000000, LENGTH = 64K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 192K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + _siccmram = LOADADDR(.ccmram); + + /* CCM-RAM section + * + * IMPORTANT NOTE! + * If initialized variables will be placed in this section, + * the startup code needs to be modified to copy the init-values. + */ + .ccmram : + { + . = ALIGN(4); + _sccmram = .; /* create a global symbol at ccmram start */ + *(.ccmram) + *(.ccmram*) + + . = ALIGN(4); + _eccmram = .; /* create a global symbol at ccmram end */ + } >CCMRAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h new file mode 100644 index 000000000..e5a822426 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h @@ -0,0 +1,108 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +// UART Enable for STLink VCOM +#define UART_DEV USART3 +#define UART_GPIO_PORT GPIOD +#define UART_GPIO_AF GPIO_AF7_USART3 +#define UART_TX_PIN GPIO_PIN_8 +#define UART_RX_PIN GPIO_PIN_9 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the + * device is clocked below the maximum system frequency, to update the + * voltage scaling value regarding system frequency refer to product + * datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + * clocks dividers */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | + RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); + + // Enable clocks for LED, Button, Uart + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_USART3_CLK_ENABLE(); +} + +static inline void board_vbus_sense_init(void) +{ + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk new file mode 100644 index 000000000..b7b36a8a6 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32F439xx + +LD_FILE = $(BOARD_PATH)/STM32F439ZITX_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f439xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32f439zi + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h new file mode 100644 index 000000000..a2c11d717 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h @@ -0,0 +1,486 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration file + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +// #define HAL_SPI_MODULE_ENABLED +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* LAN8742A_PHY_ADDRESS Address*/ +#define LAN8742A_PHY_ADDRESS 0U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY 0x000000FFU +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY 0x00000FFFU + +#define PHY_READ_TO 0x0000FFFFU +#define PHY_WRITE_TO 0x0000FFFFU + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +#define PHY_ISFR ((uint16_t)0x001DU) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x000BU) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.3.1 From 103817b8b61115e67addfbd696b647f00e47cd30 Mon Sep 17 00:00:00 2001 From: Alex Voinea Date: Wed, 22 Dec 2021 22:56:53 +0200 Subject: Fix typo Oops. Made a typo in 6de423606fc9d512efb830b198c76f095a182a1c --- docs/reference/supported.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 4dd172dbe..1f7f395cb 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -344,7 +344,7 @@ F4 - `STM32 F411ve Discovery `__ - `STM32 F412zg Discovery `__ - `STM32 F412zg Nucleo `__ -- `STM32 F439zg Nucleo `__ +- `STM32 F439zi Nucleo `__ F7 ^^ -- cgit v1.3.1 From 745607357b9fc46aafb496f628c60c6fb18af6f9 Mon Sep 17 00:00:00 2001 From: kkitayam <45088311+kkitayam@users.noreply.github.com> Date: Mon, 27 Dec 2021 21:51:23 +0900 Subject: Update Renesas RX status --- docs/reference/supported.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 1f7f395cb..445643733 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -60,7 +60,7 @@ Supported MCUs +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Renesas | RX 63N, 65N, 72N | ✔ | ✖ | ✖ | usba | | +| Renesas | RX 63N, 65N, 72N | ✔ | ✔ | ✖ | usba | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -- cgit v1.3.1 From a80f23711eefb8d59f76bc70183705d7c368de64 Mon Sep 17 00:00:00 2001 From: Iain Sharp Date: Mon, 24 Jan 2022 20:56:13 +0000 Subject: Some platforms require SDKs and use of cmake --- docs/reference/getting_started.rst | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'docs/reference') diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 875372c81..7f2c03faa 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -52,6 +52,8 @@ Some TinyUSB examples also requires external submodule libraries in ``/lib`` suc In addition, MCU driver submodule is also needed to provide low-level MCU peripheral's driver. Luckily, it will be fetched if needed when you run the ``make`` to build your board. +Some modules will also require a module-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. + Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``/examples/device/99-tinyusb.rules`` file to /etc/udev/rules.d/ then run ``sudo udevadm control --reload-rules && sudo udevadm trigger`` is good enough. Build @@ -63,6 +65,8 @@ To build example, first change directory to an example folder. $ cd examples/device/cdc_msc +Some modules (e.g. RP2040 and ESP32s2) require the project makefiles to be customized using CMake. If necessary apply any setup steps for the platform's SDK. + Then compile with ``make BOARD=[board_name] all``\ , for example .. code-block:: -- cgit v1.3.1 From ce7a8fed36dc61ef488f1c75a9c810681c7dcde9 Mon Sep 17 00:00:00 2001 From: kkitayam <45088311+kkitayam@users.noreply.github.com> Date: Fri, 28 Jan 2022 01:18:44 +0900 Subject: Add a partial support mark to KL25 --- docs/reference/supported.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 445643733..7c5402d93 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -42,7 +42,7 @@ Supported MCUs +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | NXP | iMXRT | RT10xx | ✔ | ✔ | ✔ | ci_hs | | | +---------+-------------+--------+------+-----------+-------------------+--------------+ -| | Kinetis | KL25 | ✔ | | ✖ | | | +| | Kinetis | KL25 | ✔ | ⚠ | ✖ | | | | | +-------------+--------+------+-----------+-------------------+--------------+ | | | K32L2 | ✔ | | ✖ | | | | +---------+-------------+--------+------+-----------+-------------------+--------------+ -- cgit v1.3.1 From a72d0245fa33e05a4b3fc44efd5e6bf2560722c6 Mon Sep 17 00:00:00 2001 From: NexusXe Date: Wed, 16 Feb 2022 08:29:20 -0600 Subject: Fix link to supported boards It used to point to `boards.md`, which doesn't exist. --- docs/reference/getting_started.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 875372c81..77155cd67 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -37,7 +37,7 @@ It is relatively simple to incorporate tinyusb to your (existing) project Examples -------- -For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API() should be used. Most examples will work on most of `the supported Boards `_. Firstly we need to ``git clone`` if not already +For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API() should be used. Most examples will work on most of `the supported Boards `_. Firstly we need to ``git clone`` if not already .. code-block:: -- cgit v1.3.1 From ada7a23ddc7d429b447d34785ffec2c230d75b1d Mon Sep 17 00:00:00 2001 From: NexusXe Date: Wed, 16 Feb 2022 08:33:06 -0600 Subject: Fix capitalization --- docs/reference/getting_started.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 77155cd67..4a53626cd 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -37,7 +37,7 @@ It is relatively simple to incorporate tinyusb to your (existing) project Examples -------- -For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API() should be used. Most examples will work on most of `the supported Boards `_. Firstly we need to ``git clone`` if not already +For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API() should be used. Most examples will work on most of `the supported boards `_. Firstly we need to ``git clone`` if not already .. code-block:: -- cgit v1.3.1 From 4642cb8d0a968823d1b5ae89086d4d3507f50dc5 Mon Sep 17 00:00:00 2001 From: Rafael Silva Date: Fri, 4 Mar 2022 15:35:32 +0000 Subject: documentatio: fix bad supported dev table format --- docs/reference/supported.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 7c5402d93..7ce982713 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -42,7 +42,7 @@ Supported MCUs +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | NXP | iMXRT | RT10xx | ✔ | ✔ | ✔ | ci_hs | | | +---------+-------------+--------+------+-----------+-------------------+--------------+ -| | Kinetis | KL25 | ✔ | ⚠ | ✖ | | | +| | Kinetis | KL25 | ✔ | ⚠ | ✖ | | | | | +-------------+--------+------+-----------+-------------------+--------------+ | | | K32L2 | ✔ | | ✖ | | | | +---------+-------------+--------+------+-----------+-------------------+--------------+ -- cgit v1.3.1 From 46fb850e02ae5010e0f7209775e1f5392112efa4 Mon Sep 17 00:00:00 2001 From: Greg Davill Date: Wed, 23 Mar 2022 00:06:51 +1030 Subject: Update support table --- docs/reference/supported.rst | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 7ce982713..aebee2c29 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -102,6 +102,8 @@ Supported MCUs +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| WCH | CH32V307 | ✔ | ✖ | ✔ | ch32v307 | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ Table Legend @@ -388,3 +390,8 @@ Tomu ---- - `Fomu `__ + +WCH +--- + +- `CH32V307V-R1-1v0 ` -- cgit v1.3.1 From 7d395c674ca083a245df0601c8a6d392c75b34e8 Mon Sep 17 00:00:00 2001 From: Greg Davill Date: Wed, 23 Mar 2022 00:46:44 +1030 Subject: Update supported table --- docs/reference/supported.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index aebee2c29..7543e44ab 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -102,7 +102,7 @@ Supported MCUs +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| WCH | CH32V307 | ✔ | ✖ | ✔ | ch32v307 | | +| WCH | CH32V307 | ✔ | | ✔ | ch32v307 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -- cgit v1.3.1 From 16c0eb0d2f2e2afe551d7bd239cb8092df7b2128 Mon Sep 17 00:00:00 2001 From: Sven Date: Tue, 24 May 2022 21:45:35 +0200 Subject: fix links in docs changed markdown formatting to rst formatting --- docs/reference/index.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/index.rst b/docs/reference/index.rst index fcff03590..292fb1a93 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -25,7 +25,7 @@ Supports multiple device configurations by dynamically changing usb descriptors. - Vendor-specific class support with generic In & Out endpoints. Can be used with MS OS 2.0 compatible descriptor to load winUSB driver without INF file. - `WebUSB `__ with vendor-specific class -If you have special need, `usbd_app_driver_get_cb()` can be used to write your own class driver without modifying the stack. Here is how RPi team add their reset interface [raspberrypi/pico-sdk#197](https://github.com/raspberrypi/pico-sdk/pull/197) +If you have special need, `usbd_app_driver_get_cb()` can be used to write your own class driver without modifying the stack. Here is how RPi team add their reset interface `raspberrypi/pico-sdk#197 `__ Host Stack ========== @@ -41,7 +41,7 @@ TinyUSB is completely thread-safe by pushing all ISR events into a central queue - **No OS** - **FreeRTOS** -- **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its [own repo](https://github.com/hathach/mynewt-tinyusb-example) +- **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its `own repo `__ License ======= -- cgit v1.3.1 From dcadbf3364778814c8a0e7e73481d12e8687f1bd Mon Sep 17 00:00:00 2001 From: Rafael Silva Date: Tue, 8 Mar 2022 16:05:29 +0000 Subject: rename renesas driver to link link was chosen according to the name for the usb core on datasheets, LINK core Signed-off-by: Rafael Silva --- docs/reference/supported.rst | 6 +- hw/bsp/rx/family.mk | 4 +- src/portable/renesas/link/dcd_link.c | 915 +++++++++++++++++++++++++++++++++++ src/portable/renesas/link/hcd_link.c | 875 +++++++++++++++++++++++++++++++++ src/portable/renesas/usba/dcd_usba.c | 915 ----------------------------------- src/portable/renesas/usba/hcd_usba.c | 875 --------------------------------- 6 files changed, 1795 insertions(+), 1795 deletions(-) create mode 100644 src/portable/renesas/link/dcd_link.c create mode 100644 src/portable/renesas/link/hcd_link.c delete mode 100644 src/portable/renesas/usba/dcd_usba.c delete mode 100644 src/portable/renesas/usba/hcd_usba.c (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 7ce982713..3c1b94623 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -59,9 +59,9 @@ Supported MCUs | | | 55 | ✔ | | ✔ | lpc_ip3511 | | +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040 | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Renesas | RX 63N, 65N, 72N | ✔ | ✔ | ✖ | usba | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ ++--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ +| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | link | | ++--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | diff --git a/hw/bsp/rx/family.mk b/hw/bsp/rx/family.mk index aba05812d..22b9031b3 100644 --- a/hw/bsp/rx/family.mk +++ b/hw/bsp/rx/family.mk @@ -14,8 +14,8 @@ CFLAGS += \ -DSSIZE_MAX=__INT_MAX__ SRC_C += \ - src/portable/renesas/usba/dcd_usba.c \ - src/portable/renesas/usba/hcd_usba.c \ + src/portable/renesas/link/dcd_link.c \ + src/portable/renesas/link/hcd_link.c \ $(MCU_DIR)/vects.c INC += \ diff --git a/src/portable/renesas/link/dcd_link.c b/src/portable/renesas/link/dcd_link.c new file mode 100644 index 000000000..fa87c9f4d --- /dev/null +++ b/src/portable/renesas/link/dcd_link.c @@ -0,0 +1,915 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Koji Kitayama + * Portions copyrighted (c) 2021 Roland Winistoerfer + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +// Since TinyUSB doesn't use SOF for now, and this interrupt too often (1ms interval) +// We disable SOF for now until needed later on +#define USE_SOF 0 + +#if CFG_TUD_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_RX63X || \ + CFG_TUSB_MCU == OPT_MCU_RX65X || \ + CFG_TUSB_MCU == OPT_MCU_RX72N ) +#include "device/dcd.h" +#include "iodefine.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +#define SYSTEM_PRCR_PRC1 (1<<1) +#define SYSTEM_PRCR_PRKEY (0xA5u<<8) + +#define USB_FIFOSEL_TX ((uint16_t)(1u<<5)) +#define USB_FIFOSEL_BIGEND ((uint16_t)(1u<<8)) +#define USB_FIFOSEL_MBW_8 ((uint16_t)(0u<<10)) +#define USB_FIFOSEL_MBW_16 ((uint16_t)(1u<<10)) +#define USB_IS0_CTSQ ((uint16_t)(7u)) +#define USB_IS0_DVSQ ((uint16_t)(7u<<4)) +#define USB_IS0_VALID ((uint16_t)(1u<<3)) +#define USB_IS0_BRDY ((uint16_t)(1u<<8)) +#define USB_IS0_NRDY ((uint16_t)(1u<<9)) +#define USB_IS0_BEMP ((uint16_t)(1u<<10)) +#define USB_IS0_CTRT ((uint16_t)(1u<<11)) +#define USB_IS0_DVST ((uint16_t)(1u<<12)) +#define USB_IS0_SOFR ((uint16_t)(1u<<13)) +#define USB_IS0_RESM ((uint16_t)(1u<<14)) +#define USB_IS0_VBINT ((uint16_t)(1u<<15)) +#define USB_IS1_SACK ((uint16_t)(1u<<4)) +#define USB_IS1_SIGN ((uint16_t)(1u<<5)) +#define USB_IS1_EOFERR ((uint16_t)(1u<<6)) +#define USB_IS1_ATTCH ((uint16_t)(1u<<11)) +#define USB_IS1_DTCH ((uint16_t)(1u<<12)) +#define USB_IS1_BCHG ((uint16_t)(1u<<14)) +#define USB_IS1_OVRCR ((uint16_t)(1u<<15)) + +#define USB_IS0_CTSQ_MSK (7u) +#define USB_IS0_CTSQ_SETUP (1u) +#define USB_IS0_DVSQ_DEF (1u<<4) +#define USB_IS0_DVSQ_ADDR (2u<<4) +#define USB_IS0_DVSQ_SUSP0 (4u<<4) +#define USB_IS0_DVSQ_SUSP1 (5u<<4) +#define USB_IS0_DVSQ_SUSP2 (6u<<4) +#define USB_IS0_DVSQ_SUSP3 (7u<<4) + +#define USB_PIPECTR_PID_NAK (0u) +#define USB_PIPECTR_PID_BUF (1u) +#define USB_PIPECTR_PID_STALL (2u) +#define USB_PIPECTR_CCPL (1u<<2) +#define USB_PIPECTR_SQMON (1u<<6) +#define USB_PIPECTR_SQCLR (1u<<8) +#define USB_PIPECTR_ACLRM (1u<<9) +#define USB_PIPECTR_INBUFM (1u<<14) +#define USB_PIPECTR_BSTS (1u<<15) + +#define USB_FIFOCTR_DTLN (0x1FF) +#define USB_FIFOCTR_FRDY (1u<<13) +#define USB_FIFOCTR_BCLR (1u<<14) +#define USB_FIFOCTR_BVAL (1u<<15) + +#define USB_PIPECFG_SHTNAK (1u<<7) +#define USB_PIPECFG_DBLB (1u<<9) +#define USB_PIPECFG_BULK (1u<<14) +#define USB_PIPECFG_ISO (3u<<14) +#define USB_PIPECFG_INT (2u<<14) + +#define FIFO_REQ_CLR (1u) +#define FIFO_COMPLETE (1u<<1) + +// Start of definition of packed structs (used by the CCRX toolchain) +TU_ATTR_PACKED_BEGIN +TU_ATTR_BIT_FIELD_ORDER_BEGIN + +typedef struct { + union { + struct { + uint16_t : 8; + uint16_t TRCLR: 1; + uint16_t TRENB: 1; + uint16_t : 0; + }; + uint16_t TRE; + }; + uint16_t TRN; +} reg_pipetre_t; + +typedef union { + struct { + volatile uint16_t u8: 8; + volatile uint16_t : 0; + }; + volatile uint16_t u16; +} hw_fifo_t; + +typedef struct TU_ATTR_PACKED +{ + void *buf; /* the start address of a transfer data buffer */ + uint16_t length; /* the number of bytes in the buffer */ + uint16_t remaining; /* the number of bytes remaining in the buffer */ + struct { + uint32_t ep : 8; /* an assigned endpoint address */ + uint32_t ff : 1; /* `buf` is TU_FUFO or POD */ + uint32_t : 0; + }; +} pipe_state_t; + +TU_ATTR_PACKED_END // End of definition of packed structs (used by the CCRX toolchain) +TU_ATTR_BIT_FIELD_ORDER_END + +typedef struct +{ + pipe_state_t pipe[10]; + uint8_t ep[2][16]; /* a lookup table for a pipe index from an endpoint address */ +} dcd_data_t; + +//--------------------------------------------------------------------+ +// INTERNAL OBJECT & FUNCTION DECLARATION +//--------------------------------------------------------------------+ +static dcd_data_t _dcd; + +static uint32_t disable_interrupt(void) +{ + uint32_t pswi; +#if defined(__CCRX__) + pswi = get_psw() & 0x010000; + clrpsw_i(); +#else + pswi = __builtin_rx_mvfc(0) & 0x010000; + __builtin_rx_clrpsw('I'); +#endif + return pswi; +} + +static void enable_interrupt(uint32_t pswi) +{ +#if defined(__CCRX__) + set_psw(get_psw() | pswi); +#else + __builtin_rx_mvtc(0, __builtin_rx_mvfc(0) | pswi); +#endif +} + +static unsigned find_pipe(unsigned xfer) +{ + switch (xfer) { + case TUSB_XFER_ISOCHRONOUS: + for (int i = 1; i <= 2; ++i) { + if (0 == _dcd.pipe[i].ep) return i; + } + break; + case TUSB_XFER_BULK: + for (int i = 3; i <= 5; ++i) { + if (0 == _dcd.pipe[i].ep) return i; + } + for (int i = 1; i <= 1; ++i) { + if (0 == _dcd.pipe[i].ep) return i; + } + break; + case TUSB_XFER_INTERRUPT: + for (int i = 6; i <= 9; ++i) { + if (0 == _dcd.pipe[i].ep) return i; + } + break; + default: + /* No support for control transfer */ + break; + } + return 0; +} + +static volatile uint16_t* get_pipectr(unsigned num) +{ + volatile uint16_t *ctr = NULL; + if (num) { + ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD; + ctr += num - 1; + } else { + ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD; + } + return ctr; +} + +static volatile reg_pipetre_t* get_pipetre(unsigned num) +{ + volatile reg_pipetre_t* tre = NULL; + if ((1 <= num) && (num <= 5)) { + tre = (volatile reg_pipetre_t*)&USB0.PIPE1TRE.WORD; + tre += num - 1; + } + return tre; +} + +static volatile uint16_t* ep_addr_to_pipectr(uint8_t rhport, unsigned ep_addr) +{ + (void)rhport; + volatile uint16_t *ctr = NULL; + const unsigned epn = tu_edpt_number(ep_addr); + if (epn) { + const unsigned dir = tu_edpt_dir(ep_addr); + const unsigned num = _dcd.ep[dir][epn]; + if (num) { + ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD; + ctr += num - 1; + } + } else { + ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD; + } + return ctr; +} + +static unsigned edpt0_max_packet_size(void) +{ + return USB0.DCPMAXP.BIT.MXPS; +} + +static unsigned edpt_max_packet_size(unsigned num) +{ + USB0.PIPESEL.WORD = num; + return USB0.PIPEMAXP.WORD; +} + +static inline void pipe_wait_for_ready(unsigned num) +{ + while (USB0.D0FIFOSEL.BIT.CURPIPE != num) ; + while (!USB0.D0FIFOCTR.BIT.FRDY) ; +} + +static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) +{ + volatile hw_fifo_t *reg = (volatile hw_fifo_t*) fifo; + uintptr_t addr = (uintptr_t)buf; + while (len >= 2) { + reg->u16 = *(const uint16_t *)addr; + addr += 2; + len -= 2; + } + if (len) { + reg->u8 = *(const uint8_t *)addr; + ++addr; + } +} + +static void pipe_read_packet(void *buf, volatile void *fifo, unsigned len) +{ + uint8_t *p = (uint8_t*)buf; + volatile uint8_t *reg = (volatile uint8_t*)fifo; /* byte access is always at base register address */ + while (len--) *p++ = *reg; +} + +static void pipe_read_write_packet_ff(tu_fifo_t *f, volatile void *fifo, unsigned len, unsigned dir) +{ + static const struct { + void (*tu_fifo_get_info)(tu_fifo_t *f, tu_fifo_buffer_info_t *info); + void (*tu_fifo_advance)(tu_fifo_t *f, uint16_t n); + void (*pipe_read_write)(void *buf, volatile void *fifo, unsigned len); + } ops[] = { + /* OUT */ {tu_fifo_get_write_info,tu_fifo_advance_write_pointer,pipe_read_packet}, + /* IN */ {tu_fifo_get_read_info, tu_fifo_advance_read_pointer, pipe_write_packet}, + }; + tu_fifo_buffer_info_t info; + ops[dir].tu_fifo_get_info(f, &info); + unsigned total_len = len; + len = TU_MIN(total_len, info.len_lin); + ops[dir].pipe_read_write(info.ptr_lin, fifo, len); + unsigned rem = total_len - len; + if (rem) { + len = TU_MIN(rem, info.len_wrap); + ops[dir].pipe_read_write(info.ptr_wrap, fifo, len); + rem -= len; + } + ops[dir].tu_fifo_advance(f, total_len - rem); +} + +static bool pipe0_xfer_in(void) +{ + pipe_state_t *pipe = &_dcd.pipe[0]; + const unsigned rem = pipe->remaining; + if (!rem) { + pipe->buf = NULL; + return true; + } + const unsigned mps = edpt0_max_packet_size(); + const unsigned len = TU_MIN(mps, rem); + void *buf = pipe->buf; + if (len) { + if (pipe->ff) { + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&USB0.CFIFO.WORD, len, TUSB_DIR_IN); + } else { + pipe_write_packet(buf, (volatile void*)&USB0.CFIFO.WORD, len); + pipe->buf = (uint8_t*)buf + len; + } + } + if (len < mps) USB0.CFIFOCTR.WORD = USB_FIFOCTR_BVAL; + pipe->remaining = rem - len; + return false; +} + +static bool pipe0_xfer_out(void) +{ + pipe_state_t *pipe = &_dcd.pipe[0]; + const unsigned rem = pipe->remaining; + + const unsigned mps = edpt0_max_packet_size(); + const unsigned vld = USB0.CFIFOCTR.BIT.DTLN; + const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); + void *buf = pipe->buf; + if (len) { + if (pipe->ff) { + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&USB0.CFIFO.WORD, len, TUSB_DIR_OUT); + } else { + pipe_read_packet(buf, (volatile void*)&USB0.CFIFO.WORD, len); + pipe->buf = (uint8_t*)buf + len; + } + } + if (len < mps) USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR; + pipe->remaining = rem - len; + if ((len < mps) || (rem == len)) { + pipe->buf = NULL; + return true; + } + return false; +} + +static bool pipe_xfer_in(unsigned num) +{ + pipe_state_t *pipe = &_dcd.pipe[num]; + const unsigned rem = pipe->remaining; + + if (!rem) { + pipe->buf = NULL; + return true; + } + + USB0.D0FIFOSEL.WORD = num | USB_FIFOSEL_MBW_16 | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? USB_FIFOSEL_BIGEND : 0); + const unsigned mps = edpt_max_packet_size(num); + pipe_wait_for_ready(num); + const unsigned len = TU_MIN(rem, mps); + void *buf = pipe->buf; + if (len) { + if (pipe->ff) { + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&USB0.D0FIFO.WORD, len, TUSB_DIR_IN); + } else { + pipe_write_packet(buf, (volatile void*)&USB0.D0FIFO.WORD, len); + pipe->buf = (uint8_t*)buf + len; + } + } + if (len < mps) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL; + USB0.D0FIFOSEL.WORD = 0; + while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + pipe->remaining = rem - len; + return false; +} + +static bool pipe_xfer_out(unsigned num) +{ + pipe_state_t *pipe = &_dcd.pipe[num]; + const unsigned rem = pipe->remaining; + + USB0.D0FIFOSEL.WORD = num | USB_FIFOSEL_MBW_8; + const unsigned mps = edpt_max_packet_size(num); + pipe_wait_for_ready(num); + const unsigned vld = USB0.D0FIFOCTR.BIT.DTLN; + const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); + void *buf = pipe->buf; + if (len) { + if (pipe->ff) { + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&USB0.D0FIFO.WORD, len, TUSB_DIR_OUT); + } else { + pipe_read_packet(buf, (volatile void*)&USB0.D0FIFO.WORD, len); + pipe->buf = (uint8_t*)buf + len; + } + } + if (len < mps) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BCLR; + USB0.D0FIFOSEL.WORD = 0; + while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + pipe->remaining = rem - len; + if ((len < mps) || (rem == len)) { + pipe->buf = NULL; + return NULL != buf; + } + return false; +} + +static void process_setup_packet(uint8_t rhport) +{ + uint16_t setup_packet[4]; + if (0 == (USB0.INTSTS0.WORD & USB_IS0_VALID)) return; + USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR; + setup_packet[0] = tu_le16toh(USB0.USBREQ.WORD); + setup_packet[1] = USB0.USBVAL; + setup_packet[2] = USB0.USBINDX; + setup_packet[3] = USB0.USBLENG; + USB0.INTSTS0.WORD = ~USB_IS0_VALID; + dcd_event_setup_received(rhport, (const uint8_t*)&setup_packet[0], true); +} + +static void process_status_completion(uint8_t rhport) +{ + uint8_t ep_addr; + /* Check the data stage direction */ + if (USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX) { + /* IN transfer. */ + ep_addr = tu_edpt_addr(0, TUSB_DIR_IN); + } else { + /* OUT transfer. */ + ep_addr = tu_edpt_addr(0, TUSB_DIR_OUT); + } + dcd_event_xfer_complete(rhport, ep_addr, 0, XFER_RESULT_SUCCESS, true); +} + +static bool process_pipe0_xfer(int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) +{ + /* configure fifo direction and access unit settings */ + if (ep_addr) { /* IN, 2 bytes */ + USB0.CFIFOSEL.WORD = USB_FIFOSEL_TX | USB_FIFOSEL_MBW_16 | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? USB_FIFOSEL_BIGEND : 0); + while (!(USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX)) ; + } else { /* OUT, a byte */ + USB0.CFIFOSEL.WORD = USB_FIFOSEL_MBW_8; + while (USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX) ; + } + + pipe_state_t *pipe = &_dcd.pipe[0]; + pipe->ff = buffer_type; + pipe->length = total_bytes; + pipe->remaining = total_bytes; + if (total_bytes) { + pipe->buf = buffer; + if (ep_addr) { /* IN */ + TU_ASSERT(USB0.DCPCTR.BIT.BSTS && (USB0.USBREQ.WORD & 0x80)); + pipe0_xfer_in(); + } + USB0.DCPCTR.WORD = USB_PIPECTR_PID_BUF; + } else { + /* ZLP */ + pipe->buf = NULL; + USB0.DCPCTR.WORD = USB_PIPECTR_CCPL | USB_PIPECTR_PID_BUF; + } + return true; +} + +static bool process_pipe_xfer(int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) +{ + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + const unsigned num = _dcd.ep[dir][epn]; + + TU_ASSERT(num); + + pipe_state_t *pipe = &_dcd.pipe[num]; + pipe->ff = buffer_type; + pipe->buf = buffer; + pipe->length = total_bytes; + pipe->remaining = total_bytes; + if (dir) { /* IN */ + if (total_bytes) { + pipe_xfer_in(num); + } else { /* ZLP */ + USB0.D0FIFOSEL.WORD = num; + pipe_wait_for_ready(num); + USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL; + USB0.D0FIFOSEL.WORD = 0; + while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + } + } else { +#if defined(__CCRX__) + __evenaccess volatile reg_pipetre_t *pt = get_pipetre(num); +#else + volatile reg_pipetre_t *pt = get_pipetre(num); +#endif + if (pt) { + const unsigned mps = edpt_max_packet_size(num); + volatile uint16_t *ctr = get_pipectr(num); + if (*ctr & 0x3) *ctr = USB_PIPECTR_PID_NAK; + pt->TRE = TU_BIT(8); + pt->TRN = (total_bytes + mps - 1) / mps; + pt->TRENB = 1; + *ctr = USB_PIPECTR_PID_BUF; + } + } + // TU_LOG1("X %x %d %d\r\n", ep_addr, total_bytes, buffer_type); + return true; +} + +static bool process_edpt_xfer(int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) +{ + const unsigned epn = tu_edpt_number(ep_addr); + if (0 == epn) { + return process_pipe0_xfer(buffer_type, ep_addr, buffer, total_bytes); + } else { + return process_pipe_xfer(buffer_type, ep_addr, buffer, total_bytes); + } +} + +static void process_pipe0_bemp(uint8_t rhport) +{ + bool completed = pipe0_xfer_in(); + if (completed) { + pipe_state_t *pipe = &_dcd.pipe[0]; + dcd_event_xfer_complete(rhport, tu_edpt_addr(0, TUSB_DIR_IN), + pipe->length, XFER_RESULT_SUCCESS, true); + } +} + +static void process_pipe_brdy(uint8_t rhport, unsigned num) +{ + pipe_state_t *pipe = &_dcd.pipe[num]; + const unsigned dir = tu_edpt_dir(pipe->ep); + bool completed; + + if (dir) { /* IN */ + completed = pipe_xfer_in(num); + } else { + if (num) { + completed = pipe_xfer_out(num); + } else { + completed = pipe0_xfer_out(); + } + } + if (completed) { + dcd_event_xfer_complete(rhport, pipe->ep, + pipe->length - pipe->remaining, + XFER_RESULT_SUCCESS, true); + // TU_LOG1("C %d %d\r\n", num, pipe->length - pipe->remaining); + } +} + +static void process_bus_reset(uint8_t rhport) +{ + USB0.BEMPENB.WORD = 1; + USB0.BRDYENB.WORD = 1; + USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR; + USB0.D0FIFOSEL.WORD = 0; + while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + USB0.D1FIFOSEL.WORD = 0; + while (USB0.D1FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + volatile uint16_t *ctr = (volatile uint16_t*)((uintptr_t)(&USB0.PIPE1CTR.WORD)); + volatile uint16_t *tre = (volatile uint16_t*)((uintptr_t)(&USB0.PIPE1TRE.WORD)); + for (int i = 1; i <= 5; ++i) { + USB0.PIPESEL.WORD = i; + USB0.PIPECFG.WORD = 0; + *ctr = USB_PIPECTR_ACLRM; + *ctr = 0; + ++ctr; + *tre = TU_BIT(8); + tre += 2; + } + for (int i = 6; i <= 9; ++i) { + USB0.PIPESEL.WORD = i; + USB0.PIPECFG.WORD = 0; + *ctr = USB_PIPECTR_ACLRM; + *ctr = 0; + ++ctr; + } + tu_varclr(&_dcd); + dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true); +} + +static void process_set_address(uint8_t rhport) +{ + const uint32_t addr = USB0.USBADDR.BIT.USBADDR; + if (!addr) return; + const tusb_control_request_t setup_packet = { +#if defined(__CCRX__) + .bmRequestType = { 0 }, /* Note: CCRX needs the braces over this struct member */ +#else + .bmRequestType = 0, +#endif + .bRequest = TUSB_REQ_SET_ADDRESS, + .wValue = addr, + .wIndex = 0, + .wLength = 0, + }; + dcd_event_setup_received(rhport, (const uint8_t*)&setup_packet, true); +} + +/*------------------------------------------------------------------*/ +/* Device API + *------------------------------------------------------------------*/ +void dcd_init(uint8_t rhport) +{ + (void)rhport; + /* Enable USB0 */ + uint32_t pswi = disable_interrupt(); + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; + MSTP(USB0) = 0; + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; + enable_interrupt(pswi); + USB0.SYSCFG.BIT.SCKE = 1; + while (!USB0.SYSCFG.BIT.SCKE) ; + USB0.SYSCFG.BIT.DRPD = 0; + USB0.SYSCFG.BIT.DCFM = 0; + USB0.SYSCFG.BIT.USBE = 1; + + USB.DPUSR0R.BIT.FIXPHY0 = 0u; /* USB0 Transceiver Output fixed */ +#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) + USB0.PHYSLEW.LONG = 0x5; + IR(PERIB, INTB185) = 0; +#else + IR(USB0, USBI0) = 0; +#endif + + /* Setup default control pipe */ + USB0.DCPMAXP.BIT.MXPS = 64; + USB0.INTENB0.WORD = USB_IS0_VBINT | USB_IS0_BRDY | USB_IS0_BEMP | + USB_IS0_DVST | USB_IS0_CTRT | (USE_SOF ? USB_IS0_SOFR: 0) | USB_IS0_RESM; + USB0.BEMPENB.WORD = 1; + USB0.BRDYENB.WORD = 1; + + if (USB0.INTSTS0.BIT.VBSTS) { + dcd_connect(rhport); + } +} + +void dcd_int_enable(uint8_t rhport) +{ + (void)rhport; +#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) + IEN(PERIB, INTB185) = 1; +#else + IEN(USB0, USBI0) = 1; +#endif +} + +void dcd_int_disable(uint8_t rhport) +{ + (void)rhport; +#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) + IEN(PERIB, INTB185) = 0; +#else + IEN(USB0, USBI0) = 0; +#endif +} + +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) +{ + (void)rhport; + (void)dev_addr; +} + +void dcd_remote_wakeup(uint8_t rhport) +{ + (void)rhport; + USB0.DVSTCTR0.BIT.WKUP = 1; +} + +void dcd_connect(uint8_t rhport) +{ + (void)rhport; + USB0.SYSCFG.BIT.DPRPU = 1; +} + +void dcd_disconnect(uint8_t rhport) +{ + (void)rhport; + USB0.SYSCFG.BIT.DPRPU = 0; +} + +void dcd_sof_enable(uint8_t rhport, bool en) +{ + (void) rhport; + (void) en; + + // TODO implement later +} + +//--------------------------------------------------------------------+ +// Endpoint API +//--------------------------------------------------------------------+ +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) +{ + (void)rhport; + + const unsigned ep_addr = ep_desc->bEndpointAddress; + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + const unsigned xfer = ep_desc->bmAttributes.xfer; + + const unsigned mps = tu_edpt_packet_size(ep_desc); + if (xfer == TUSB_XFER_ISOCHRONOUS && mps > 256) { + /* USBa supports up to 256 bytes */ + return false; + } + + const unsigned num = find_pipe(xfer); + if (!num) return false; + _dcd.pipe[num].ep = ep_addr; + _dcd.ep[dir][epn] = num; + + /* setup pipe */ + dcd_int_disable(rhport); + USB0.PIPESEL.WORD = num; + USB0.PIPEMAXP.WORD = mps; + volatile uint16_t *ctr = get_pipectr(num); + *ctr = USB_PIPECTR_ACLRM | USB_PIPECTR_SQCLR; + *ctr = 0; + unsigned cfg = (dir << 4) | epn; + if (xfer == TUSB_XFER_BULK) { + cfg |= (USB_PIPECFG_BULK | USB_PIPECFG_SHTNAK | USB_PIPECFG_DBLB); + } else if (xfer == TUSB_XFER_INTERRUPT) { + cfg |= USB_PIPECFG_INT; + } else { + cfg |= (USB_PIPECFG_ISO | USB_PIPECFG_DBLB); + } + USB0.PIPECFG.WORD = cfg; + USB0.BRDYSTS.WORD = 0x1FFu ^ TU_BIT(num); + USB0.BRDYENB.WORD |= TU_BIT(num); + if (dir || (xfer != TUSB_XFER_BULK)) { + *ctr = USB_PIPECTR_PID_BUF; + } + // TU_LOG1("O %d %x %x\r\n", USB0.PIPESEL.WORD, USB0.PIPECFG.WORD, USB0.PIPEMAXP.WORD); + dcd_int_enable(rhport); + + return true; +} + +void dcd_edpt_close_all(uint8_t rhport) +{ + unsigned i = TU_ARRAY_SIZE(_dcd.pipe); + dcd_int_disable(rhport); + while (--i) { /* Close all pipes except 0 */ + const unsigned ep_addr = _dcd.pipe[i].ep; + if (!ep_addr) continue; + dcd_edpt_close(rhport, ep_addr); + } + dcd_int_enable(rhport); +} + +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) +{ + (void)rhport; + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + const unsigned num = _dcd.ep[dir][epn]; + + USB0.BRDYENB.WORD &= ~TU_BIT(num); + volatile uint16_t *ctr = get_pipectr(num); + *ctr = 0; + USB0.PIPESEL.WORD = num; + USB0.PIPECFG.WORD = 0; + _dcd.pipe[num].ep = 0; + _dcd.ep[dir][epn] = 0; +} + +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +{ + bool r; + dcd_int_disable(rhport); + r = process_edpt_xfer(0, ep_addr, buffer, total_bytes); + dcd_int_enable(rhport); + return r; +} + +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +{ + // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1 + TU_ASSERT(ff->item_size == 1); + bool r; + dcd_int_disable(rhport); + r = process_edpt_xfer(1, ep_addr, ff, total_bytes); + dcd_int_enable(rhport); + return r; +} + +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) +{ + volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr); + if (!ctr) return; + dcd_int_disable(rhport); + const uint32_t pid = *ctr & 0x3; + *ctr = pid | USB_PIPECTR_PID_STALL; + *ctr = USB_PIPECTR_PID_STALL; + dcd_int_enable(rhport); +} + +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) +{ + volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr); + if (!ctr) return; + dcd_int_disable(rhport); + *ctr = USB_PIPECTR_SQCLR; + + if (tu_edpt_dir(ep_addr)) { /* IN */ + *ctr = USB_PIPECTR_PID_BUF; + } else { + const unsigned num = _dcd.ep[0][tu_edpt_number(ep_addr)]; + USB0.PIPESEL.WORD = num; + if (USB0.PIPECFG.BIT.TYPE != 1) { + *ctr = USB_PIPECTR_PID_BUF; + } + } + dcd_int_enable(rhport); +} + +//--------------------------------------------------------------------+ +// ISR +//--------------------------------------------------------------------+ +void dcd_int_handler(uint8_t rhport) +{ + (void)rhport; + + unsigned is0 = USB0.INTSTS0.WORD; + /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ + USB0.INTSTS0.WORD = ~((USB_IS0_CTRT | USB_IS0_DVST | USB_IS0_SOFR | USB_IS0_RESM | USB_IS0_VBINT) & is0) | USB_IS0_VALID; + if (is0 & USB_IS0_VBINT) { + if (USB0.INTSTS0.BIT.VBSTS) { + dcd_connect(rhport); + } else { + dcd_disconnect(rhport); + } + } + if (is0 & USB_IS0_RESM) { + dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); +#if (0==USE_SOF) + USB0.INTENB0.BIT.SOFE = 0; +#endif + } + if ((is0 & USB_IS0_SOFR) && USB0.INTENB0.BIT.SOFE) { + // USBD will exit suspended mode when SOF event is received + dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); +#if (0==USE_SOF) + USB0.INTENB0.BIT.SOFE = 0; +#endif + } + if (is0 & USB_IS0_DVST) { + switch (is0 & USB_IS0_DVSQ) { + case USB_IS0_DVSQ_DEF: + process_bus_reset(rhport); + break; + case USB_IS0_DVSQ_ADDR: + process_set_address(rhport); + break; + case USB_IS0_DVSQ_SUSP0: + case USB_IS0_DVSQ_SUSP1: + case USB_IS0_DVSQ_SUSP2: + case USB_IS0_DVSQ_SUSP3: + dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); +#if (0==USE_SOF) + USB0.INTENB0.BIT.SOFE = 1; +#endif + default: + break; + } + } + if (is0 & USB_IS0_CTRT) { + if (is0 & USB_IS0_CTSQ_SETUP) { + /* A setup packet has been received. */ + process_setup_packet(rhport); + } else if (0 == (is0 & USB_IS0_CTSQ_MSK)) { + /* A ZLP has been sent/received. */ + process_status_completion(rhport); + } + } + if (is0 & USB_IS0_BEMP) { + const unsigned s = USB0.BEMPSTS.WORD; + USB0.BEMPSTS.WORD = 0; + if (s & 1) { + process_pipe0_bemp(rhport); + } + } + if (is0 & USB_IS0_BRDY) { + const unsigned m = USB0.BRDYENB.WORD; + unsigned s = USB0.BRDYSTS.WORD & m; + /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ + USB0.BRDYSTS.WORD = ~s; + while (s) { +#if defined(__CCRX__) + static const int Mod37BitPosition[] = { + -1, 0, 1, 26, 2, 23, 27, 0, 3, 16, 24, 30, 28, 11, 0, 13, 4, + 7, 17, 0, 25, 22, 31, 15, 29, 10, 12, 6, 0, 21, 14, 9, 5, + 20, 8, 19, 18 + }; + + const unsigned num = Mod37BitPosition[(-s & s) % 37]; +#else + const unsigned num = __builtin_ctz(s); +#endif + process_pipe_brdy(rhport, num); + s &= ~TU_BIT(num); + } + } +} + +#endif diff --git a/src/portable/renesas/link/hcd_link.c b/src/portable/renesas/link/hcd_link.c new file mode 100644 index 000000000..5246ecb94 --- /dev/null +++ b/src/portable/renesas/link/hcd_link.c @@ -0,0 +1,875 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021 Koji Kitayama + * Portions copyrighted (c) 2021 Roland Winistoerfer + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUH_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_RX63X || \ + CFG_TUSB_MCU == OPT_MCU_RX65X || \ + CFG_TUSB_MCU == OPT_MCU_RX72N ) +#include "host/hcd.h" +#include "iodefine.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +#define SYSTEM_PRCR_PRC1 (1<<1) +#define SYSTEM_PRCR_PRKEY (0xA5u<<8) + +#define USB_DVSTCTR0_LOW (1u) +#define USB_DVSTCTR0_FULL (2u) + +#define USB_FIFOSEL_TX ((uint16_t)(1u<<5)) +#define USB_FIFOSEL_BIGEND ((uint16_t)(1u<<8)) +#define USB_FIFOSEL_MBW_8 ((uint16_t)(0u<<10)) +#define USB_FIFOSEL_MBW_16 ((uint16_t)(1u<<10)) +#define USB_IS0_CTSQ ((uint16_t)(7u)) +#define USB_IS0_DVSQ ((uint16_t)(7u<<4)) +#define USB_IS0_VALID ((uint16_t)(1u<<3)) +#define USB_IS0_BRDY ((uint16_t)(1u<<8)) +#define USB_IS0_NRDY ((uint16_t)(1u<<9)) +#define USB_IS0_BEMP ((uint16_t)(1u<<10)) +#define USB_IS0_CTRT ((uint16_t)(1u<<11)) +#define USB_IS0_DVST ((uint16_t)(1u<<12)) +#define USB_IS0_SOFR ((uint16_t)(1u<<13)) +#define USB_IS0_RESM ((uint16_t)(1u<<14)) +#define USB_IS0_VBINT ((uint16_t)(1u<<15)) +#define USB_IS1_SACK ((uint16_t)(1u<<4)) +#define USB_IS1_SIGN ((uint16_t)(1u<<5)) +#define USB_IS1_EOFERR ((uint16_t)(1u<<6)) +#define USB_IS1_ATTCH ((uint16_t)(1u<<11)) +#define USB_IS1_DTCH ((uint16_t)(1u<<12)) +#define USB_IS1_BCHG ((uint16_t)(1u<<14)) +#define USB_IS1_OVRCR ((uint16_t)(1u<<15)) + +#define USB_IS0_CTSQ_MSK (7u) +#define USB_IS0_CTSQ_SETUP (1u) +#define USB_IS0_DVSQ_DEF (1u<<4) +#define USB_IS0_DVSQ_ADDR (2u<<4) +#define USB_IS0_DVSQ_SUSP0 (4u<<4) +#define USB_IS0_DVSQ_SUSP1 (5u<<4) +#define USB_IS0_DVSQ_SUSP2 (6u<<4) +#define USB_IS0_DVSQ_SUSP3 (7u<<4) + +#define USB_PIPECTR_PID_MSK (3u) +#define USB_PIPECTR_PID_NAK (0u) +#define USB_PIPECTR_PID_BUF (1u) +#define USB_PIPECTR_PID_STALL (2u) +#define USB_PIPECTR_CCPL (1u<<2) +#define USB_PIPECTR_SQMON (1u<<6) +#define USB_PIPECTR_SQCLR (1u<<8) +#define USB_PIPECTR_ACLRM (1u<<9) +#define USB_PIPECTR_INBUFM (1u<<14) +#define USB_PIPECTR_BSTS (1u<<15) + +#define USB_FIFOCTR_DTLN (0x1FF) +#define USB_FIFOCTR_FRDY (1u<<13) +#define USB_FIFOCTR_BCLR (1u<<14) +#define USB_FIFOCTR_BVAL (1u<<15) + +#define USB_PIPECFG_SHTNAK (1u<<7) +#define USB_PIPECFG_DBLB (1u<<9) +#define USB_PIPECFG_BULK (1u<<14) +#define USB_PIPECFG_ISO (3u<<14) +#define USB_PIPECFG_INT (2u<<14) + +#define USB_DEVADD_LOW (1u<<6) +#define USB_DEVADD_FULL (2u<<6) + +#define FIFO_REQ_CLR (1u) +#define FIFO_COMPLETE (1u<<1) + +// Start of definition of packed structs (used by the CCRX toolchain) +TU_ATTR_PACKED_BEGIN +TU_ATTR_BIT_FIELD_ORDER_BEGIN + +typedef struct { + union { + struct { + uint16_t : 8; + uint16_t TRCLR: 1; + uint16_t TRENB: 1; + uint16_t : 0; + }; + uint16_t TRE; + }; + uint16_t TRN; +} reg_pipetre_t; + +typedef union { + struct { + volatile uint16_t u8: 8; + volatile uint16_t : 0; + }; + volatile uint16_t u16; +} hw_fifo_t; + +typedef struct TU_ATTR_PACKED +{ + void *buf; /* the start address of a transfer data buffer */ + uint16_t length; /* the number of bytes in the buffer */ + uint16_t remaining; /* the number of bytes remaining in the buffer */ + struct { + uint32_t ep : 8; /* an assigned endpoint address */ + uint32_t dev : 8; /* an assigned device address */ + uint32_t ff : 1; /* `buf` is TU_FUFO or POD */ + uint32_t : 0; + }; +} pipe_state_t; + +TU_ATTR_PACKED_END // End of definition of packed structs (used by the CCRX toolchain) +TU_ATTR_BIT_FIELD_ORDER_END + +typedef struct +{ + bool need_reset; /* The device has not been reset after connection. */ + pipe_state_t pipe[10]; + uint8_t ep[4][2][15]; /* a lookup table for a pipe index from an endpoint address */ + uint8_t ctl_mps[5]; /* EP0 max packet size for each device */ +} hcd_data_t; + +//--------------------------------------------------------------------+ +// INTERNAL OBJECT & FUNCTION DECLARATION +//--------------------------------------------------------------------+ +static hcd_data_t _hcd; + +static uint32_t disable_interrupt(void) +{ + uint32_t pswi; +#if defined(__CCRX__) + pswi = get_psw() & 0x010000; + clrpsw_i(); +#else + pswi = __builtin_rx_mvfc(0) & 0x010000; + __builtin_rx_clrpsw('I'); +#endif + return pswi; +} + +static void enable_interrupt(uint32_t pswi) +{ +#if defined(__CCRX__) + set_psw(get_psw() | pswi); +#else + __builtin_rx_mvtc(0, __builtin_rx_mvfc(0) | pswi); +#endif +} + +static unsigned find_pipe(unsigned xfer) +{ + switch (xfer) { + case TUSB_XFER_ISOCHRONOUS: + for (int i = 1; i <= 2; ++i) { + if (0 == _hcd.pipe[i].ep) return i; + } + break; + case TUSB_XFER_BULK: + for (int i = 3; i <= 5; ++i) { + if (0 == _hcd.pipe[i].ep) return i; + } + for (int i = 1; i <= 1; ++i) { + if (0 == _hcd.pipe[i].ep) return i; + } + break; + case TUSB_XFER_INTERRUPT: + for (int i = 6; i <= 9; ++i) { + if (0 == _hcd.pipe[i].ep) return i; + } + break; + default: + /* No support for control transfer */ + break; + } + return 0; +} + +static volatile uint16_t* get_pipectr(unsigned num) +{ + volatile uint16_t *ctr = NULL; + if (num) { + ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD; + ctr += num - 1; + } else { + ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD; + } + return ctr; +} + +static volatile reg_pipetre_t* get_pipetre(unsigned num) +{ + volatile reg_pipetre_t* tre = NULL; + if ((1 <= num) && (num <= 5)) { + tre = (volatile reg_pipetre_t*)&USB0.PIPE1TRE.WORD; + tre += num - 1; + } + return tre; +} + +static volatile uint16_t* addr_to_pipectr(uint8_t dev_addr, unsigned ep_addr) +{ + volatile uint16_t *ctr = NULL; + const unsigned epn = tu_edpt_number(ep_addr); + if (epn) { + const unsigned dir_in = tu_edpt_dir(ep_addr); + const unsigned num = _hcd.ep[dev_addr][dir_in][epn - 1]; + if (num) { + ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD; + ctr += num - 1; + } + } else { + ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD; + } + return ctr; +} + +static unsigned edpt0_max_packet_size(void) +{ + return USB0.DCPMAXP.BIT.MXPS; +} + +static unsigned edpt_max_packet_size(unsigned num) +{ + USB0.PIPESEL.WORD = num; + return USB0.PIPEMAXP.BIT.MXPS; +} + +static inline void pipe_wait_for_ready(unsigned num) +{ + while (USB0.D0FIFOSEL.BIT.CURPIPE != num) ; + while (!USB0.D0FIFOCTR.BIT.FRDY) ; +} + +static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) +{ + volatile hw_fifo_t *reg = (volatile hw_fifo_t*)fifo; + uintptr_t addr = (uintptr_t)buf; + while (len >= 2) { + reg->u16 = *(const uint16_t *)addr; + addr += 2; + len -= 2; + } + if (len) { + reg->u8 = *(const uint8_t *)addr; + ++addr; + } +} + +static void pipe_read_packet(void *buf, volatile void *fifo, unsigned len) +{ + uint8_t *p = (uint8_t*)buf; + volatile uint8_t *reg = (volatile uint8_t*)fifo; /* byte access is always at base register address */ + while (len--) *p++ = *reg; +} + +static bool pipe0_xfer_in(void) +{ + pipe_state_t *pipe = &_hcd.pipe[0]; + const unsigned rem = pipe->remaining; + + const unsigned mps = edpt0_max_packet_size(); + const unsigned vld = USB0.CFIFOCTR.BIT.DTLN; + const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); + void *buf = pipe->buf; + if (len) { + USB0.DCPCTR.WORD = USB_PIPECTR_PID_NAK; + pipe_read_packet(buf, (volatile void*)&USB0.CFIFO.WORD, len); + pipe->buf = (uint8_t*)buf + len; + } + if (len < mps) USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR; + pipe->remaining = rem - len; + if ((len < mps) || (rem == len)) { + pipe->buf = NULL; + return true; + } + USB0.DCPCTR.WORD = USB_PIPECTR_PID_BUF; + return false; +} + +static bool pipe0_xfer_out(void) +{ + pipe_state_t *pipe = &_hcd.pipe[0]; + const unsigned rem = pipe->remaining; + if (!rem) { + pipe->buf = NULL; + return true; + } + const unsigned mps = edpt0_max_packet_size(); + const unsigned len = TU_MIN(mps, rem); + void *buf = pipe->buf; + if (len) { + pipe_write_packet(buf, (volatile void*)&USB0.CFIFO.WORD, len); + pipe->buf = (uint8_t*)buf + len; + } + if (len < mps) USB0.CFIFOCTR.WORD = USB_FIFOCTR_BVAL; + pipe->remaining = rem - len; + return false; +} + +static bool pipe_xfer_in(unsigned num) +{ + pipe_state_t *pipe = &_hcd.pipe[num]; + const unsigned rem = pipe->remaining; + + USB0.D0FIFOSEL.WORD = num | USB_FIFOSEL_MBW_8; + const unsigned mps = edpt_max_packet_size(num); + pipe_wait_for_ready(num); + const unsigned vld = USB0.D0FIFOCTR.BIT.DTLN; + const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); + void *buf = pipe->buf; + if (len) { + pipe_read_packet(buf, (volatile void*)&USB0.D0FIFO.WORD, len); + pipe->buf = (uint8_t*)buf + len; + } + if (len < mps) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BCLR; + USB0.D0FIFOSEL.WORD = 0; + while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + pipe->remaining = rem - len; + if ((len < mps) || (rem == len)) { + pipe->buf = NULL; + return NULL != buf; + } + return false; +} + +static bool pipe_xfer_out(unsigned num) +{ + pipe_state_t *pipe = &_hcd.pipe[num]; + const unsigned rem = pipe->remaining; + + if (!rem) { + pipe->buf = NULL; + return true; + } + + USB0.D0FIFOSEL.WORD = num | USB_FIFOSEL_MBW_16 | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? USB_FIFOSEL_BIGEND : 0); + const unsigned mps = edpt_max_packet_size(num); + pipe_wait_for_ready(num); + const unsigned len = TU_MIN(rem, mps); + void *buf = pipe->buf; + if (len) { + pipe_write_packet(buf, (volatile void*)&USB0.D0FIFO.WORD, len); + pipe->buf = (uint8_t*)buf + len; + } + if (len < mps) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL; + USB0.D0FIFOSEL.WORD = 0; + while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + pipe->remaining = rem - len; + return false; +} + +static bool process_pipe0_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) +{ + (void)dev_addr; + const unsigned dir_in = tu_edpt_dir(ep_addr); + + /* configure fifo direction and access unit settings */ + if (dir_in) { /* IN, a byte */ + USB0.CFIFOSEL.WORD = USB_FIFOSEL_MBW_8; + while (USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX) ; + } else { /* OUT, 2 bytes */ + USB0.CFIFOSEL.WORD = USB_FIFOSEL_TX | USB_FIFOSEL_MBW_16 | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? USB_FIFOSEL_BIGEND : 0); + while (!(USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX)) ; + } + + pipe_state_t *pipe = &_hcd.pipe[0]; + pipe->ep = ep_addr; + pipe->length = buflen; + pipe->remaining = buflen; + if (buflen) { + pipe->buf = buffer; + if (!dir_in) { /* OUT */ + TU_ASSERT(USB0.DCPCTR.BIT.BSTS && (USB0.USBREQ.WORD & 0x80)); + pipe0_xfer_out(); + } + } else { /* ZLP */ + pipe->buf = NULL; + if (!dir_in) { /* OUT */ + USB0.CFIFOCTR.WORD = USB_FIFOCTR_BVAL; + } + if (dir_in == USB0.DCPCFG.BIT.DIR) { + TU_ASSERT(USB_PIPECTR_PID_NAK == USB0.DCPCTR.BIT.PID); + USB0.DCPCTR.BIT.SQSET = 1; + USB0.DCPCFG.BIT.DIR = dir_in ^ 1; + } + } + USB0.DCPCTR.WORD = USB_PIPECTR_PID_BUF; + return true; +} + +static bool process_pipe_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) +{ + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir_in = tu_edpt_dir(ep_addr); + const unsigned num = _hcd.ep[dev_addr - 1][dir_in][epn - 1]; + + TU_ASSERT(num); + + pipe_state_t *pipe = &_hcd.pipe[num]; + pipe->buf = buffer; + pipe->length = buflen; + pipe->remaining = buflen; + if (!dir_in) { /* OUT */ + if (buflen) { + pipe_xfer_out(num); + } else { /* ZLP */ + USB0.D0FIFOSEL.WORD = num; + pipe_wait_for_ready(num); + USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL; + USB0.D0FIFOSEL.WORD = 0; + while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + } + } else { + volatile uint16_t *ctr = get_pipectr(num); + volatile reg_pipetre_t *pt = get_pipetre(num); + if (pt) { + const unsigned mps = edpt_max_packet_size(num); + if (*ctr & 0x3) *ctr = USB_PIPECTR_PID_NAK; + pt->TRE = TU_BIT(8); + pt->TRN = (buflen + mps - 1) / mps; + pt->TRENB = 1; + } + *ctr = USB_PIPECTR_PID_BUF; + } + return true; +} + +static bool process_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) +{ + const unsigned epn = tu_edpt_number(ep_addr); + if (0 == epn) { + return process_pipe0_xfer(dev_addr, ep_addr, buffer, buflen); + } else { + return process_pipe_xfer(dev_addr, ep_addr, buffer, buflen); + } +} + +static void process_pipe0_bemp(uint8_t rhport) +{ + (void)rhport; + bool completed = pipe0_xfer_out(); + if (completed) { + pipe_state_t *pipe = &_hcd.pipe[0]; + hcd_event_xfer_complete(pipe->dev, + tu_edpt_addr(0, TUSB_DIR_OUT), + pipe->length - pipe->remaining, + XFER_RESULT_SUCCESS, true); + } +} + +static void process_pipe_nrdy(uint8_t rhport, unsigned num) +{ + (void)rhport; + unsigned result; + uint16_t volatile *ctr = get_pipectr(num); + // TU_LOG1("NRDY %d %x\n", num, *ctr); + switch (*ctr & USB_PIPECTR_PID_MSK) { + default: return; + case USB_PIPECTR_PID_STALL: result = XFER_RESULT_STALLED; break; + case USB_PIPECTR_PID_NAK: result = XFER_RESULT_FAILED; break; + } + pipe_state_t *pipe = &_hcd.pipe[num]; + hcd_event_xfer_complete(pipe->dev, pipe->ep, + pipe->length - pipe->remaining, + result, true); +} + +static void process_pipe_brdy(uint8_t rhport, unsigned num) +{ + (void)rhport; + pipe_state_t *pipe = &_hcd.pipe[num]; + const unsigned dir_in = tu_edpt_dir(pipe->ep); + bool completed; + + if (dir_in) { /* IN */ + if (num) { + completed = pipe_xfer_in(num); + } else { + completed = pipe0_xfer_in(); + } + } else { + completed = pipe_xfer_out(num); + } + if (completed) { + hcd_event_xfer_complete(pipe->dev, pipe->ep, + pipe->length - pipe->remaining, + XFER_RESULT_SUCCESS, true); + // TU_LOG1("C %d %d\r\n", num, pipe->length - pipe->remaining); + } +} + + +/*------------------------------------------------------------------*/ +/* Host API + *------------------------------------------------------------------*/ +bool hcd_init(uint8_t rhport) +{ + (void)rhport; + /* Enable USB0 */ + uint32_t pswi = disable_interrupt(); + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; + MSTP(USB0) = 0; + SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; + enable_interrupt(pswi); + USB0.SYSCFG.BIT.SCKE = 1; + while (!USB0.SYSCFG.BIT.SCKE) ; + USB0.SYSCFG.BIT.DPRPU = 0; + USB0.SYSCFG.BIT.DRPD = 0; + USB0.SYSCFG.BIT.DCFM = 1; + + USB0.DVSTCTR0.BIT.VBUSEN = 1; + + USB0.SYSCFG.BIT.DRPD = 1; + for (volatile int i = 0; i < 30000; ++i) ; + USB0.SYSCFG.BIT.USBE = 1; + + USB.DPUSR0R.BIT.FIXPHY0 = 0u; /* USB0 Transceiver Output fixed */ +#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) + USB0.PHYSLEW.LONG = 0x5; + IR(PERIB, INTB185) = 0; +#else + IR(USB0, USBI0) = 0; +#endif + + /* Setup default control pipe */ + USB0.DCPCFG.WORD = USB_PIPECFG_SHTNAK; + USB0.DCPMAXP.WORD = 64; + USB0.INTENB0.WORD = USB_IS0_BRDY | USB_IS0_NRDY | USB_IS0_BEMP; + USB0.INTENB1.WORD = USB_IS1_SACK | USB_IS1_SIGN | + USB_IS1_ATTCH | USB_IS1_DTCH; + USB0.BEMPENB.WORD = 1; + USB0.NRDYENB.WORD = 1; + USB0.BRDYENB.WORD = 1; + return true; +} + +void hcd_int_enable(uint8_t rhport) +{ + (void)rhport; +#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) + IEN(PERIB, INTB185) = 1; +#else + IEN(USB0, USBI0) = 1; +#endif +} + +void hcd_int_disable(uint8_t rhport) +{ + (void)rhport; +#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) + IEN(PERIB, INTB185) = 0; +#else + IEN(USB0, USBI0) = 0; +#endif +} + +uint32_t hcd_frame_number(uint8_t rhport) +{ + (void)rhport; + /* The device must be reset at least once after connection + * in order to start the frame counter. */ + if (_hcd.need_reset) hcd_port_reset(rhport); + return USB0.FRMNUM.BIT.FRNM; +} + +/*--------------------------------------------------------------------+ + * Port API + *--------------------------------------------------------------------+*/ +bool hcd_port_connect_status(uint8_t rhport) +{ + (void)rhport; + return USB0.INTSTS1.BIT.ATTCH ? true: false; +} + +void hcd_port_reset(uint8_t rhport) +{ + USB0.DCPCTR.WORD = USB_PIPECTR_PID_NAK; + while (USB0.DCPCTR.BIT.PBUSY) ; + hcd_int_disable(rhport); + USB0.DVSTCTR0.BIT.UACT = 0; + if (USB0.DCPCTR.BIT.SUREQ) + USB0.DCPCTR.BIT.SUREQCLR = 1; + hcd_int_enable(rhport); + /* Reset should be asserted 10-20ms. */ + USB0.DVSTCTR0.BIT.USBRST = 1; + for (volatile int i = 0; i < 2400000; ++i) ; + USB0.DVSTCTR0.BIT.USBRST = 0; + USB0.DVSTCTR0.BIT.UACT = 1; + _hcd.need_reset = false; +} + +void hcd_port_reset_end(uint8_t rhport) +{ + (void) rhport; +} + +tusb_speed_t hcd_port_speed_get(uint8_t rhport) +{ + (void)rhport; + switch (USB0.DVSTCTR0.BIT.RHST) { + default: return TUSB_SPEED_INVALID; + case USB_DVSTCTR0_FULL: return TUSB_SPEED_FULL; + case USB_DVSTCTR0_LOW: return TUSB_SPEED_LOW; + } +} + +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) +{ + (void)rhport; + uint16_t volatile *ctr; + TU_ASSERT(dev_addr < 6,); /* USBa can only handle addresses from 0 to 5. */ + if (!dev_addr) return; + _hcd.ctl_mps[dev_addr] = 0; + uint8_t *ep = &_hcd.ep[dev_addr - 1][0][0]; + for (int i = 0; i < 2 * 15; ++i, ++ep) { + unsigned num = *ep; + if (!num || dev_addr != _hcd.pipe[num].dev) continue; + + ctr = (uint16_t volatile*)&USB0.PIPE1CTR.WORD + num - 1; + *ctr = 0; + USB0.NRDYENB.WORD &= ~TU_BIT(num); + USB0.BRDYENB.WORD &= ~TU_BIT(num); + USB0.PIPESEL.WORD = num; + USB0.PIPECFG.WORD = 0; + USB0.PIPEMAXP.WORD = 0; + + _hcd.pipe[num].ep = 0; + _hcd.pipe[num].dev = 0; + *ep = 0; + } +} + +/*--------------------------------------------------------------------+ + * Endpoints API + *--------------------------------------------------------------------+*/ +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) +{ + (void)rhport; + // TU_LOG1("S %d %x\n", dev_addr, USB0.DCPCTR.WORD); + + TU_ASSERT(dev_addr < 6); /* USBa can only handle addresses from 0 to 5. */ + TU_ASSERT(0 == USB0.DCPCTR.BIT.SUREQ); + + USB0.DCPCTR.WORD = USB_PIPECTR_PID_NAK; + + _hcd.pipe[0].buf = NULL; + _hcd.pipe[0].length = 8; + _hcd.pipe[0].remaining = 0; + _hcd.pipe[0].dev = dev_addr; + + while (USB0.DCPCTR.BIT.PBUSY) ; + USB0.DCPMAXP.WORD = (dev_addr << 12) | _hcd.ctl_mps[dev_addr]; + + /* Set direction in advance for DATA stage */ + uint8_t const bmRequesttype = setup_packet[0]; + USB0.DCPCFG.BIT.DIR = tu_edpt_dir(bmRequesttype) ? 0: 1; + + uint16_t const* p = (uint16_t const*)(uintptr_t)&setup_packet[0]; + USB0.USBREQ.WORD = tu_htole16(p[0]); + USB0.USBVAL = p[1]; + USB0.USBINDX = p[2]; + USB0.USBLENG = p[3]; + + USB0.DCPCTR.BIT.SUREQ = 1; + return true; +} + +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) +{ + (void)rhport; + TU_ASSERT(dev_addr < 6); /* USBa can only handle addresses from 0 to 5. */ + + const unsigned ep_addr = ep_desc->bEndpointAddress; + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned mps = tu_edpt_packet_size(ep_desc); + if (0 == epn) { + USB0.DCPCTR.WORD = USB_PIPECTR_PID_NAK; + hcd_devtree_info_t devtree; + hcd_devtree_get_info(dev_addr, &devtree); + uint16_t volatile *devadd = (uint16_t volatile *)(uintptr_t)&USB0.DEVADD0.WORD; + devadd += dev_addr; + while (USB0.DCPCTR.BIT.PBUSY) ; + USB0.DCPMAXP.WORD = (dev_addr << 12) | mps; + *devadd = (TUSB_SPEED_FULL == devtree.speed) ? USB_DEVADD_FULL : USB_DEVADD_LOW; + _hcd.ctl_mps[dev_addr] = mps; + return true; + } + + const unsigned dir_in = tu_edpt_dir(ep_addr); + const unsigned xfer = ep_desc->bmAttributes.xfer; + if (xfer == TUSB_XFER_ISOCHRONOUS && mps > 256) { + /* USBa supports up to 256 bytes */ + return false; + } + const unsigned num = find_pipe(xfer); + if (!num) return false; + _hcd.pipe[num].dev = dev_addr; + _hcd.pipe[num].ep = ep_addr; + _hcd.ep[dev_addr - 1][dir_in][epn - 1] = num; + + /* setup pipe */ + hcd_int_disable(rhport); + USB0.PIPESEL.WORD = num; + USB0.PIPEMAXP.WORD = (dev_addr << 12) | mps; + volatile uint16_t *ctr = get_pipectr(num); + *ctr = USB_PIPECTR_ACLRM | USB_PIPECTR_SQCLR; + *ctr = 0; + unsigned cfg = ((1 ^ dir_in) << 4) | epn; + if (xfer == TUSB_XFER_BULK) { + cfg |= USB_PIPECFG_BULK | USB_PIPECFG_SHTNAK | USB_PIPECFG_DBLB; + } else if (xfer == TUSB_XFER_INTERRUPT) { + cfg |= USB_PIPECFG_INT; + } else { + cfg |= USB_PIPECFG_ISO | USB_PIPECFG_DBLB; + } + USB0.PIPECFG.WORD = cfg; + USB0.BRDYSTS.WORD = 0x1FFu ^ TU_BIT(num); + USB0.NRDYENB.WORD |= TU_BIT(num); + USB0.BRDYENB.WORD |= TU_BIT(num); + if (!dir_in) { + *ctr = USB_PIPECTR_PID_BUF; + } + hcd_int_enable(rhport); + + return true; +} + +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) +{ + bool r; + hcd_int_disable(rhport); + // TU_LOG1("X %d %x %u\n", dev_addr, ep_addr, buflen); + r = process_edpt_xfer(dev_addr, ep_addr, buffer, buflen); + hcd_int_enable(rhport); + return r; +} + +bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) +{ + uint16_t volatile *ctr = addr_to_pipectr(dev_addr, ep_addr); + TU_ASSERT(ctr); + + const uint32_t pid = *ctr & 0x3; + if (pid & 2) { + *ctr = pid & 2; + *ctr = 0; + } + *ctr = USB_PIPECTR_SQCLR; + unsigned const epn = tu_edpt_number(ep_addr); + if (!epn) return true; + + if (!tu_edpt_dir(ep_addr)) { /* OUT */ + *ctr = USB_PIPECTR_PID_BUF; + } + return true; +} + +//--------------------------------------------------------------------+ +// ISR +//--------------------------------------------------------------------+ +void hcd_int_handler(uint8_t rhport) +{ + (void)rhport; +#if defined(__CCRX__) + static const int Mod37BitPosition[] = { + -1, 0, 1, 26, 2, 23, 27, 0, 3, 16, 24, 30, 28, 11, 0, 13, 4, + 7, 17, 0, 25, 22, 31, 15, 29, 10, 12, 6, 0, 21, 14, 9, 5, + 20, 8, 19, 18}; +#endif + + unsigned is1 = USB0.INTSTS1.WORD; + unsigned is0 = USB0.INTSTS0.WORD; + /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ + USB0.INTSTS1.WORD = ~((USB_IS1_SACK | USB_IS1_SIGN | USB_IS1_ATTCH | USB_IS1_DTCH) & is1); + USB0.INTSTS0.WORD = ~((USB_IS0_BRDY | USB_IS0_NRDY | USB_IS0_BEMP) & is0); + // TU_LOG1("IS %04x %04x\n", is0, is1); + is1 &= USB0.INTENB1.WORD; + is0 &= USB0.INTENB0.WORD; + + if (is1 & USB_IS1_SACK) { + /* Set DATA1 in advance for the next transfer. */ + USB0.DCPCTR.BIT.SQSET = 1; + hcd_event_xfer_complete(USB0.DCPMAXP.BIT.DEVSEL, + tu_edpt_addr(0, TUSB_DIR_OUT), + 8, XFER_RESULT_SUCCESS, true); + } + if (is1 & USB_IS1_SIGN) { + hcd_event_xfer_complete(USB0.DCPMAXP.BIT.DEVSEL, + tu_edpt_addr(0, TUSB_DIR_OUT), + 8, XFER_RESULT_FAILED, true); + } + if (is1 & USB_IS1_ATTCH) { + USB0.DVSTCTR0.BIT.UACT = 1; + _hcd.need_reset = true; + USB0.INTENB1.WORD = (USB0.INTENB1.WORD & ~USB_IS1_ATTCH) | USB_IS1_DTCH; + hcd_event_device_attach(rhport, true); + } + if (is1 & USB_IS1_DTCH) { + USB0.DVSTCTR0.BIT.UACT = 0; + if (USB0.DCPCTR.BIT.SUREQ) + USB0.DCPCTR.BIT.SUREQCLR = 1; + USB0.INTENB1.WORD = (USB0.INTENB1.WORD & ~USB_IS1_DTCH) | USB_IS1_ATTCH; + hcd_event_device_remove(rhport, true); + } + + if (is0 & USB_IS0_BEMP) { + const unsigned s = USB0.BEMPSTS.WORD; + USB0.BEMPSTS.WORD = 0; + if (s & 1) { + process_pipe0_bemp(rhport); + } + } + if (is0 & USB_IS0_NRDY) { + const unsigned m = USB0.NRDYENB.WORD; + unsigned s = USB0.NRDYSTS.WORD & m; + USB0.NRDYSTS.WORD = ~s; + while (s) { +#if defined(__CCRX__) + const unsigned num = Mod37BitPosition[(-s & s) % 37]; +#else + const unsigned num = __builtin_ctz(s); +#endif + process_pipe_nrdy(rhport, num); + s &= ~TU_BIT(num); + } + } + if (is0 & USB_IS0_BRDY) { + const unsigned m = USB0.BRDYENB.WORD; + unsigned s = USB0.BRDYSTS.WORD & m; + /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ + USB0.BRDYSTS.WORD = ~s; + while (s) { +#if defined(__CCRX__) + const unsigned num = Mod37BitPosition[(-s & s) % 37]; +#else + const unsigned num = __builtin_ctz(s); +#endif + process_pipe_brdy(rhport, num); + s &= ~TU_BIT(num); + } + } +} + +#endif diff --git a/src/portable/renesas/usba/dcd_usba.c b/src/portable/renesas/usba/dcd_usba.c deleted file mode 100644 index fa87c9f4d..000000000 --- a/src/portable/renesas/usba/dcd_usba.c +++ /dev/null @@ -1,915 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 Koji Kitayama - * Portions copyrighted (c) 2021 Roland Winistoerfer - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -// Since TinyUSB doesn't use SOF for now, and this interrupt too often (1ms interval) -// We disable SOF for now until needed later on -#define USE_SOF 0 - -#if CFG_TUD_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_RX63X || \ - CFG_TUSB_MCU == OPT_MCU_RX65X || \ - CFG_TUSB_MCU == OPT_MCU_RX72N ) -#include "device/dcd.h" -#include "iodefine.h" - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define SYSTEM_PRCR_PRC1 (1<<1) -#define SYSTEM_PRCR_PRKEY (0xA5u<<8) - -#define USB_FIFOSEL_TX ((uint16_t)(1u<<5)) -#define USB_FIFOSEL_BIGEND ((uint16_t)(1u<<8)) -#define USB_FIFOSEL_MBW_8 ((uint16_t)(0u<<10)) -#define USB_FIFOSEL_MBW_16 ((uint16_t)(1u<<10)) -#define USB_IS0_CTSQ ((uint16_t)(7u)) -#define USB_IS0_DVSQ ((uint16_t)(7u<<4)) -#define USB_IS0_VALID ((uint16_t)(1u<<3)) -#define USB_IS0_BRDY ((uint16_t)(1u<<8)) -#define USB_IS0_NRDY ((uint16_t)(1u<<9)) -#define USB_IS0_BEMP ((uint16_t)(1u<<10)) -#define USB_IS0_CTRT ((uint16_t)(1u<<11)) -#define USB_IS0_DVST ((uint16_t)(1u<<12)) -#define USB_IS0_SOFR ((uint16_t)(1u<<13)) -#define USB_IS0_RESM ((uint16_t)(1u<<14)) -#define USB_IS0_VBINT ((uint16_t)(1u<<15)) -#define USB_IS1_SACK ((uint16_t)(1u<<4)) -#define USB_IS1_SIGN ((uint16_t)(1u<<5)) -#define USB_IS1_EOFERR ((uint16_t)(1u<<6)) -#define USB_IS1_ATTCH ((uint16_t)(1u<<11)) -#define USB_IS1_DTCH ((uint16_t)(1u<<12)) -#define USB_IS1_BCHG ((uint16_t)(1u<<14)) -#define USB_IS1_OVRCR ((uint16_t)(1u<<15)) - -#define USB_IS0_CTSQ_MSK (7u) -#define USB_IS0_CTSQ_SETUP (1u) -#define USB_IS0_DVSQ_DEF (1u<<4) -#define USB_IS0_DVSQ_ADDR (2u<<4) -#define USB_IS0_DVSQ_SUSP0 (4u<<4) -#define USB_IS0_DVSQ_SUSP1 (5u<<4) -#define USB_IS0_DVSQ_SUSP2 (6u<<4) -#define USB_IS0_DVSQ_SUSP3 (7u<<4) - -#define USB_PIPECTR_PID_NAK (0u) -#define USB_PIPECTR_PID_BUF (1u) -#define USB_PIPECTR_PID_STALL (2u) -#define USB_PIPECTR_CCPL (1u<<2) -#define USB_PIPECTR_SQMON (1u<<6) -#define USB_PIPECTR_SQCLR (1u<<8) -#define USB_PIPECTR_ACLRM (1u<<9) -#define USB_PIPECTR_INBUFM (1u<<14) -#define USB_PIPECTR_BSTS (1u<<15) - -#define USB_FIFOCTR_DTLN (0x1FF) -#define USB_FIFOCTR_FRDY (1u<<13) -#define USB_FIFOCTR_BCLR (1u<<14) -#define USB_FIFOCTR_BVAL (1u<<15) - -#define USB_PIPECFG_SHTNAK (1u<<7) -#define USB_PIPECFG_DBLB (1u<<9) -#define USB_PIPECFG_BULK (1u<<14) -#define USB_PIPECFG_ISO (3u<<14) -#define USB_PIPECFG_INT (2u<<14) - -#define FIFO_REQ_CLR (1u) -#define FIFO_COMPLETE (1u<<1) - -// Start of definition of packed structs (used by the CCRX toolchain) -TU_ATTR_PACKED_BEGIN -TU_ATTR_BIT_FIELD_ORDER_BEGIN - -typedef struct { - union { - struct { - uint16_t : 8; - uint16_t TRCLR: 1; - uint16_t TRENB: 1; - uint16_t : 0; - }; - uint16_t TRE; - }; - uint16_t TRN; -} reg_pipetre_t; - -typedef union { - struct { - volatile uint16_t u8: 8; - volatile uint16_t : 0; - }; - volatile uint16_t u16; -} hw_fifo_t; - -typedef struct TU_ATTR_PACKED -{ - void *buf; /* the start address of a transfer data buffer */ - uint16_t length; /* the number of bytes in the buffer */ - uint16_t remaining; /* the number of bytes remaining in the buffer */ - struct { - uint32_t ep : 8; /* an assigned endpoint address */ - uint32_t ff : 1; /* `buf` is TU_FUFO or POD */ - uint32_t : 0; - }; -} pipe_state_t; - -TU_ATTR_PACKED_END // End of definition of packed structs (used by the CCRX toolchain) -TU_ATTR_BIT_FIELD_ORDER_END - -typedef struct -{ - pipe_state_t pipe[10]; - uint8_t ep[2][16]; /* a lookup table for a pipe index from an endpoint address */ -} dcd_data_t; - -//--------------------------------------------------------------------+ -// INTERNAL OBJECT & FUNCTION DECLARATION -//--------------------------------------------------------------------+ -static dcd_data_t _dcd; - -static uint32_t disable_interrupt(void) -{ - uint32_t pswi; -#if defined(__CCRX__) - pswi = get_psw() & 0x010000; - clrpsw_i(); -#else - pswi = __builtin_rx_mvfc(0) & 0x010000; - __builtin_rx_clrpsw('I'); -#endif - return pswi; -} - -static void enable_interrupt(uint32_t pswi) -{ -#if defined(__CCRX__) - set_psw(get_psw() | pswi); -#else - __builtin_rx_mvtc(0, __builtin_rx_mvfc(0) | pswi); -#endif -} - -static unsigned find_pipe(unsigned xfer) -{ - switch (xfer) { - case TUSB_XFER_ISOCHRONOUS: - for (int i = 1; i <= 2; ++i) { - if (0 == _dcd.pipe[i].ep) return i; - } - break; - case TUSB_XFER_BULK: - for (int i = 3; i <= 5; ++i) { - if (0 == _dcd.pipe[i].ep) return i; - } - for (int i = 1; i <= 1; ++i) { - if (0 == _dcd.pipe[i].ep) return i; - } - break; - case TUSB_XFER_INTERRUPT: - for (int i = 6; i <= 9; ++i) { - if (0 == _dcd.pipe[i].ep) return i; - } - break; - default: - /* No support for control transfer */ - break; - } - return 0; -} - -static volatile uint16_t* get_pipectr(unsigned num) -{ - volatile uint16_t *ctr = NULL; - if (num) { - ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD; - ctr += num - 1; - } else { - ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD; - } - return ctr; -} - -static volatile reg_pipetre_t* get_pipetre(unsigned num) -{ - volatile reg_pipetre_t* tre = NULL; - if ((1 <= num) && (num <= 5)) { - tre = (volatile reg_pipetre_t*)&USB0.PIPE1TRE.WORD; - tre += num - 1; - } - return tre; -} - -static volatile uint16_t* ep_addr_to_pipectr(uint8_t rhport, unsigned ep_addr) -{ - (void)rhport; - volatile uint16_t *ctr = NULL; - const unsigned epn = tu_edpt_number(ep_addr); - if (epn) { - const unsigned dir = tu_edpt_dir(ep_addr); - const unsigned num = _dcd.ep[dir][epn]; - if (num) { - ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD; - ctr += num - 1; - } - } else { - ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD; - } - return ctr; -} - -static unsigned edpt0_max_packet_size(void) -{ - return USB0.DCPMAXP.BIT.MXPS; -} - -static unsigned edpt_max_packet_size(unsigned num) -{ - USB0.PIPESEL.WORD = num; - return USB0.PIPEMAXP.WORD; -} - -static inline void pipe_wait_for_ready(unsigned num) -{ - while (USB0.D0FIFOSEL.BIT.CURPIPE != num) ; - while (!USB0.D0FIFOCTR.BIT.FRDY) ; -} - -static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) -{ - volatile hw_fifo_t *reg = (volatile hw_fifo_t*) fifo; - uintptr_t addr = (uintptr_t)buf; - while (len >= 2) { - reg->u16 = *(const uint16_t *)addr; - addr += 2; - len -= 2; - } - if (len) { - reg->u8 = *(const uint8_t *)addr; - ++addr; - } -} - -static void pipe_read_packet(void *buf, volatile void *fifo, unsigned len) -{ - uint8_t *p = (uint8_t*)buf; - volatile uint8_t *reg = (volatile uint8_t*)fifo; /* byte access is always at base register address */ - while (len--) *p++ = *reg; -} - -static void pipe_read_write_packet_ff(tu_fifo_t *f, volatile void *fifo, unsigned len, unsigned dir) -{ - static const struct { - void (*tu_fifo_get_info)(tu_fifo_t *f, tu_fifo_buffer_info_t *info); - void (*tu_fifo_advance)(tu_fifo_t *f, uint16_t n); - void (*pipe_read_write)(void *buf, volatile void *fifo, unsigned len); - } ops[] = { - /* OUT */ {tu_fifo_get_write_info,tu_fifo_advance_write_pointer,pipe_read_packet}, - /* IN */ {tu_fifo_get_read_info, tu_fifo_advance_read_pointer, pipe_write_packet}, - }; - tu_fifo_buffer_info_t info; - ops[dir].tu_fifo_get_info(f, &info); - unsigned total_len = len; - len = TU_MIN(total_len, info.len_lin); - ops[dir].pipe_read_write(info.ptr_lin, fifo, len); - unsigned rem = total_len - len; - if (rem) { - len = TU_MIN(rem, info.len_wrap); - ops[dir].pipe_read_write(info.ptr_wrap, fifo, len); - rem -= len; - } - ops[dir].tu_fifo_advance(f, total_len - rem); -} - -static bool pipe0_xfer_in(void) -{ - pipe_state_t *pipe = &_dcd.pipe[0]; - const unsigned rem = pipe->remaining; - if (!rem) { - pipe->buf = NULL; - return true; - } - const unsigned mps = edpt0_max_packet_size(); - const unsigned len = TU_MIN(mps, rem); - void *buf = pipe->buf; - if (len) { - if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&USB0.CFIFO.WORD, len, TUSB_DIR_IN); - } else { - pipe_write_packet(buf, (volatile void*)&USB0.CFIFO.WORD, len); - pipe->buf = (uint8_t*)buf + len; - } - } - if (len < mps) USB0.CFIFOCTR.WORD = USB_FIFOCTR_BVAL; - pipe->remaining = rem - len; - return false; -} - -static bool pipe0_xfer_out(void) -{ - pipe_state_t *pipe = &_dcd.pipe[0]; - const unsigned rem = pipe->remaining; - - const unsigned mps = edpt0_max_packet_size(); - const unsigned vld = USB0.CFIFOCTR.BIT.DTLN; - const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); - void *buf = pipe->buf; - if (len) { - if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&USB0.CFIFO.WORD, len, TUSB_DIR_OUT); - } else { - pipe_read_packet(buf, (volatile void*)&USB0.CFIFO.WORD, len); - pipe->buf = (uint8_t*)buf + len; - } - } - if (len < mps) USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR; - pipe->remaining = rem - len; - if ((len < mps) || (rem == len)) { - pipe->buf = NULL; - return true; - } - return false; -} - -static bool pipe_xfer_in(unsigned num) -{ - pipe_state_t *pipe = &_dcd.pipe[num]; - const unsigned rem = pipe->remaining; - - if (!rem) { - pipe->buf = NULL; - return true; - } - - USB0.D0FIFOSEL.WORD = num | USB_FIFOSEL_MBW_16 | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? USB_FIFOSEL_BIGEND : 0); - const unsigned mps = edpt_max_packet_size(num); - pipe_wait_for_ready(num); - const unsigned len = TU_MIN(rem, mps); - void *buf = pipe->buf; - if (len) { - if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&USB0.D0FIFO.WORD, len, TUSB_DIR_IN); - } else { - pipe_write_packet(buf, (volatile void*)&USB0.D0FIFO.WORD, len); - pipe->buf = (uint8_t*)buf + len; - } - } - if (len < mps) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL; - USB0.D0FIFOSEL.WORD = 0; - while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - pipe->remaining = rem - len; - return false; -} - -static bool pipe_xfer_out(unsigned num) -{ - pipe_state_t *pipe = &_dcd.pipe[num]; - const unsigned rem = pipe->remaining; - - USB0.D0FIFOSEL.WORD = num | USB_FIFOSEL_MBW_8; - const unsigned mps = edpt_max_packet_size(num); - pipe_wait_for_ready(num); - const unsigned vld = USB0.D0FIFOCTR.BIT.DTLN; - const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); - void *buf = pipe->buf; - if (len) { - if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&USB0.D0FIFO.WORD, len, TUSB_DIR_OUT); - } else { - pipe_read_packet(buf, (volatile void*)&USB0.D0FIFO.WORD, len); - pipe->buf = (uint8_t*)buf + len; - } - } - if (len < mps) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BCLR; - USB0.D0FIFOSEL.WORD = 0; - while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - pipe->remaining = rem - len; - if ((len < mps) || (rem == len)) { - pipe->buf = NULL; - return NULL != buf; - } - return false; -} - -static void process_setup_packet(uint8_t rhport) -{ - uint16_t setup_packet[4]; - if (0 == (USB0.INTSTS0.WORD & USB_IS0_VALID)) return; - USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR; - setup_packet[0] = tu_le16toh(USB0.USBREQ.WORD); - setup_packet[1] = USB0.USBVAL; - setup_packet[2] = USB0.USBINDX; - setup_packet[3] = USB0.USBLENG; - USB0.INTSTS0.WORD = ~USB_IS0_VALID; - dcd_event_setup_received(rhport, (const uint8_t*)&setup_packet[0], true); -} - -static void process_status_completion(uint8_t rhport) -{ - uint8_t ep_addr; - /* Check the data stage direction */ - if (USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX) { - /* IN transfer. */ - ep_addr = tu_edpt_addr(0, TUSB_DIR_IN); - } else { - /* OUT transfer. */ - ep_addr = tu_edpt_addr(0, TUSB_DIR_OUT); - } - dcd_event_xfer_complete(rhport, ep_addr, 0, XFER_RESULT_SUCCESS, true); -} - -static bool process_pipe0_xfer(int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) -{ - /* configure fifo direction and access unit settings */ - if (ep_addr) { /* IN, 2 bytes */ - USB0.CFIFOSEL.WORD = USB_FIFOSEL_TX | USB_FIFOSEL_MBW_16 | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? USB_FIFOSEL_BIGEND : 0); - while (!(USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX)) ; - } else { /* OUT, a byte */ - USB0.CFIFOSEL.WORD = USB_FIFOSEL_MBW_8; - while (USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX) ; - } - - pipe_state_t *pipe = &_dcd.pipe[0]; - pipe->ff = buffer_type; - pipe->length = total_bytes; - pipe->remaining = total_bytes; - if (total_bytes) { - pipe->buf = buffer; - if (ep_addr) { /* IN */ - TU_ASSERT(USB0.DCPCTR.BIT.BSTS && (USB0.USBREQ.WORD & 0x80)); - pipe0_xfer_in(); - } - USB0.DCPCTR.WORD = USB_PIPECTR_PID_BUF; - } else { - /* ZLP */ - pipe->buf = NULL; - USB0.DCPCTR.WORD = USB_PIPECTR_CCPL | USB_PIPECTR_PID_BUF; - } - return true; -} - -static bool process_pipe_xfer(int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) -{ - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - const unsigned num = _dcd.ep[dir][epn]; - - TU_ASSERT(num); - - pipe_state_t *pipe = &_dcd.pipe[num]; - pipe->ff = buffer_type; - pipe->buf = buffer; - pipe->length = total_bytes; - pipe->remaining = total_bytes; - if (dir) { /* IN */ - if (total_bytes) { - pipe_xfer_in(num); - } else { /* ZLP */ - USB0.D0FIFOSEL.WORD = num; - pipe_wait_for_ready(num); - USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL; - USB0.D0FIFOSEL.WORD = 0; - while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - } - } else { -#if defined(__CCRX__) - __evenaccess volatile reg_pipetre_t *pt = get_pipetre(num); -#else - volatile reg_pipetre_t *pt = get_pipetre(num); -#endif - if (pt) { - const unsigned mps = edpt_max_packet_size(num); - volatile uint16_t *ctr = get_pipectr(num); - if (*ctr & 0x3) *ctr = USB_PIPECTR_PID_NAK; - pt->TRE = TU_BIT(8); - pt->TRN = (total_bytes + mps - 1) / mps; - pt->TRENB = 1; - *ctr = USB_PIPECTR_PID_BUF; - } - } - // TU_LOG1("X %x %d %d\r\n", ep_addr, total_bytes, buffer_type); - return true; -} - -static bool process_edpt_xfer(int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) -{ - const unsigned epn = tu_edpt_number(ep_addr); - if (0 == epn) { - return process_pipe0_xfer(buffer_type, ep_addr, buffer, total_bytes); - } else { - return process_pipe_xfer(buffer_type, ep_addr, buffer, total_bytes); - } -} - -static void process_pipe0_bemp(uint8_t rhport) -{ - bool completed = pipe0_xfer_in(); - if (completed) { - pipe_state_t *pipe = &_dcd.pipe[0]; - dcd_event_xfer_complete(rhport, tu_edpt_addr(0, TUSB_DIR_IN), - pipe->length, XFER_RESULT_SUCCESS, true); - } -} - -static void process_pipe_brdy(uint8_t rhport, unsigned num) -{ - pipe_state_t *pipe = &_dcd.pipe[num]; - const unsigned dir = tu_edpt_dir(pipe->ep); - bool completed; - - if (dir) { /* IN */ - completed = pipe_xfer_in(num); - } else { - if (num) { - completed = pipe_xfer_out(num); - } else { - completed = pipe0_xfer_out(); - } - } - if (completed) { - dcd_event_xfer_complete(rhport, pipe->ep, - pipe->length - pipe->remaining, - XFER_RESULT_SUCCESS, true); - // TU_LOG1("C %d %d\r\n", num, pipe->length - pipe->remaining); - } -} - -static void process_bus_reset(uint8_t rhport) -{ - USB0.BEMPENB.WORD = 1; - USB0.BRDYENB.WORD = 1; - USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR; - USB0.D0FIFOSEL.WORD = 0; - while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - USB0.D1FIFOSEL.WORD = 0; - while (USB0.D1FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - volatile uint16_t *ctr = (volatile uint16_t*)((uintptr_t)(&USB0.PIPE1CTR.WORD)); - volatile uint16_t *tre = (volatile uint16_t*)((uintptr_t)(&USB0.PIPE1TRE.WORD)); - for (int i = 1; i <= 5; ++i) { - USB0.PIPESEL.WORD = i; - USB0.PIPECFG.WORD = 0; - *ctr = USB_PIPECTR_ACLRM; - *ctr = 0; - ++ctr; - *tre = TU_BIT(8); - tre += 2; - } - for (int i = 6; i <= 9; ++i) { - USB0.PIPESEL.WORD = i; - USB0.PIPECFG.WORD = 0; - *ctr = USB_PIPECTR_ACLRM; - *ctr = 0; - ++ctr; - } - tu_varclr(&_dcd); - dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true); -} - -static void process_set_address(uint8_t rhport) -{ - const uint32_t addr = USB0.USBADDR.BIT.USBADDR; - if (!addr) return; - const tusb_control_request_t setup_packet = { -#if defined(__CCRX__) - .bmRequestType = { 0 }, /* Note: CCRX needs the braces over this struct member */ -#else - .bmRequestType = 0, -#endif - .bRequest = TUSB_REQ_SET_ADDRESS, - .wValue = addr, - .wIndex = 0, - .wLength = 0, - }; - dcd_event_setup_received(rhport, (const uint8_t*)&setup_packet, true); -} - -/*------------------------------------------------------------------*/ -/* Device API - *------------------------------------------------------------------*/ -void dcd_init(uint8_t rhport) -{ - (void)rhport; - /* Enable USB0 */ - uint32_t pswi = disable_interrupt(); - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; - MSTP(USB0) = 0; - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; - enable_interrupt(pswi); - USB0.SYSCFG.BIT.SCKE = 1; - while (!USB0.SYSCFG.BIT.SCKE) ; - USB0.SYSCFG.BIT.DRPD = 0; - USB0.SYSCFG.BIT.DCFM = 0; - USB0.SYSCFG.BIT.USBE = 1; - - USB.DPUSR0R.BIT.FIXPHY0 = 0u; /* USB0 Transceiver Output fixed */ -#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) - USB0.PHYSLEW.LONG = 0x5; - IR(PERIB, INTB185) = 0; -#else - IR(USB0, USBI0) = 0; -#endif - - /* Setup default control pipe */ - USB0.DCPMAXP.BIT.MXPS = 64; - USB0.INTENB0.WORD = USB_IS0_VBINT | USB_IS0_BRDY | USB_IS0_BEMP | - USB_IS0_DVST | USB_IS0_CTRT | (USE_SOF ? USB_IS0_SOFR: 0) | USB_IS0_RESM; - USB0.BEMPENB.WORD = 1; - USB0.BRDYENB.WORD = 1; - - if (USB0.INTSTS0.BIT.VBSTS) { - dcd_connect(rhport); - } -} - -void dcd_int_enable(uint8_t rhport) -{ - (void)rhport; -#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) - IEN(PERIB, INTB185) = 1; -#else - IEN(USB0, USBI0) = 1; -#endif -} - -void dcd_int_disable(uint8_t rhport) -{ - (void)rhport; -#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) - IEN(PERIB, INTB185) = 0; -#else - IEN(USB0, USBI0) = 0; -#endif -} - -void dcd_set_address(uint8_t rhport, uint8_t dev_addr) -{ - (void)rhport; - (void)dev_addr; -} - -void dcd_remote_wakeup(uint8_t rhport) -{ - (void)rhport; - USB0.DVSTCTR0.BIT.WKUP = 1; -} - -void dcd_connect(uint8_t rhport) -{ - (void)rhport; - USB0.SYSCFG.BIT.DPRPU = 1; -} - -void dcd_disconnect(uint8_t rhport) -{ - (void)rhport; - USB0.SYSCFG.BIT.DPRPU = 0; -} - -void dcd_sof_enable(uint8_t rhport, bool en) -{ - (void) rhport; - (void) en; - - // TODO implement later -} - -//--------------------------------------------------------------------+ -// Endpoint API -//--------------------------------------------------------------------+ -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) -{ - (void)rhport; - - const unsigned ep_addr = ep_desc->bEndpointAddress; - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - const unsigned xfer = ep_desc->bmAttributes.xfer; - - const unsigned mps = tu_edpt_packet_size(ep_desc); - if (xfer == TUSB_XFER_ISOCHRONOUS && mps > 256) { - /* USBa supports up to 256 bytes */ - return false; - } - - const unsigned num = find_pipe(xfer); - if (!num) return false; - _dcd.pipe[num].ep = ep_addr; - _dcd.ep[dir][epn] = num; - - /* setup pipe */ - dcd_int_disable(rhport); - USB0.PIPESEL.WORD = num; - USB0.PIPEMAXP.WORD = mps; - volatile uint16_t *ctr = get_pipectr(num); - *ctr = USB_PIPECTR_ACLRM | USB_PIPECTR_SQCLR; - *ctr = 0; - unsigned cfg = (dir << 4) | epn; - if (xfer == TUSB_XFER_BULK) { - cfg |= (USB_PIPECFG_BULK | USB_PIPECFG_SHTNAK | USB_PIPECFG_DBLB); - } else if (xfer == TUSB_XFER_INTERRUPT) { - cfg |= USB_PIPECFG_INT; - } else { - cfg |= (USB_PIPECFG_ISO | USB_PIPECFG_DBLB); - } - USB0.PIPECFG.WORD = cfg; - USB0.BRDYSTS.WORD = 0x1FFu ^ TU_BIT(num); - USB0.BRDYENB.WORD |= TU_BIT(num); - if (dir || (xfer != TUSB_XFER_BULK)) { - *ctr = USB_PIPECTR_PID_BUF; - } - // TU_LOG1("O %d %x %x\r\n", USB0.PIPESEL.WORD, USB0.PIPECFG.WORD, USB0.PIPEMAXP.WORD); - dcd_int_enable(rhport); - - return true; -} - -void dcd_edpt_close_all(uint8_t rhport) -{ - unsigned i = TU_ARRAY_SIZE(_dcd.pipe); - dcd_int_disable(rhport); - while (--i) { /* Close all pipes except 0 */ - const unsigned ep_addr = _dcd.pipe[i].ep; - if (!ep_addr) continue; - dcd_edpt_close(rhport, ep_addr); - } - dcd_int_enable(rhport); -} - -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - (void)rhport; - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - const unsigned num = _dcd.ep[dir][epn]; - - USB0.BRDYENB.WORD &= ~TU_BIT(num); - volatile uint16_t *ctr = get_pipectr(num); - *ctr = 0; - USB0.PIPESEL.WORD = num; - USB0.PIPECFG.WORD = 0; - _dcd.pipe[num].ep = 0; - _dcd.ep[dir][epn] = 0; -} - -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) -{ - bool r; - dcd_int_disable(rhport); - r = process_edpt_xfer(0, ep_addr, buffer, total_bytes); - dcd_int_enable(rhport); - return r; -} - -bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) -{ - // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1 - TU_ASSERT(ff->item_size == 1); - bool r; - dcd_int_disable(rhport); - r = process_edpt_xfer(1, ep_addr, ff, total_bytes); - dcd_int_enable(rhport); - return r; -} - -void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) -{ - volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr); - if (!ctr) return; - dcd_int_disable(rhport); - const uint32_t pid = *ctr & 0x3; - *ctr = pid | USB_PIPECTR_PID_STALL; - *ctr = USB_PIPECTR_PID_STALL; - dcd_int_enable(rhport); -} - -void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) -{ - volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr); - if (!ctr) return; - dcd_int_disable(rhport); - *ctr = USB_PIPECTR_SQCLR; - - if (tu_edpt_dir(ep_addr)) { /* IN */ - *ctr = USB_PIPECTR_PID_BUF; - } else { - const unsigned num = _dcd.ep[0][tu_edpt_number(ep_addr)]; - USB0.PIPESEL.WORD = num; - if (USB0.PIPECFG.BIT.TYPE != 1) { - *ctr = USB_PIPECTR_PID_BUF; - } - } - dcd_int_enable(rhport); -} - -//--------------------------------------------------------------------+ -// ISR -//--------------------------------------------------------------------+ -void dcd_int_handler(uint8_t rhport) -{ - (void)rhport; - - unsigned is0 = USB0.INTSTS0.WORD; - /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ - USB0.INTSTS0.WORD = ~((USB_IS0_CTRT | USB_IS0_DVST | USB_IS0_SOFR | USB_IS0_RESM | USB_IS0_VBINT) & is0) | USB_IS0_VALID; - if (is0 & USB_IS0_VBINT) { - if (USB0.INTSTS0.BIT.VBSTS) { - dcd_connect(rhport); - } else { - dcd_disconnect(rhport); - } - } - if (is0 & USB_IS0_RESM) { - dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); -#if (0==USE_SOF) - USB0.INTENB0.BIT.SOFE = 0; -#endif - } - if ((is0 & USB_IS0_SOFR) && USB0.INTENB0.BIT.SOFE) { - // USBD will exit suspended mode when SOF event is received - dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); -#if (0==USE_SOF) - USB0.INTENB0.BIT.SOFE = 0; -#endif - } - if (is0 & USB_IS0_DVST) { - switch (is0 & USB_IS0_DVSQ) { - case USB_IS0_DVSQ_DEF: - process_bus_reset(rhport); - break; - case USB_IS0_DVSQ_ADDR: - process_set_address(rhport); - break; - case USB_IS0_DVSQ_SUSP0: - case USB_IS0_DVSQ_SUSP1: - case USB_IS0_DVSQ_SUSP2: - case USB_IS0_DVSQ_SUSP3: - dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); -#if (0==USE_SOF) - USB0.INTENB0.BIT.SOFE = 1; -#endif - default: - break; - } - } - if (is0 & USB_IS0_CTRT) { - if (is0 & USB_IS0_CTSQ_SETUP) { - /* A setup packet has been received. */ - process_setup_packet(rhport); - } else if (0 == (is0 & USB_IS0_CTSQ_MSK)) { - /* A ZLP has been sent/received. */ - process_status_completion(rhport); - } - } - if (is0 & USB_IS0_BEMP) { - const unsigned s = USB0.BEMPSTS.WORD; - USB0.BEMPSTS.WORD = 0; - if (s & 1) { - process_pipe0_bemp(rhport); - } - } - if (is0 & USB_IS0_BRDY) { - const unsigned m = USB0.BRDYENB.WORD; - unsigned s = USB0.BRDYSTS.WORD & m; - /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ - USB0.BRDYSTS.WORD = ~s; - while (s) { -#if defined(__CCRX__) - static const int Mod37BitPosition[] = { - -1, 0, 1, 26, 2, 23, 27, 0, 3, 16, 24, 30, 28, 11, 0, 13, 4, - 7, 17, 0, 25, 22, 31, 15, 29, 10, 12, 6, 0, 21, 14, 9, 5, - 20, 8, 19, 18 - }; - - const unsigned num = Mod37BitPosition[(-s & s) % 37]; -#else - const unsigned num = __builtin_ctz(s); -#endif - process_pipe_brdy(rhport, num); - s &= ~TU_BIT(num); - } - } -} - -#endif diff --git a/src/portable/renesas/usba/hcd_usba.c b/src/portable/renesas/usba/hcd_usba.c deleted file mode 100644 index 5246ecb94..000000000 --- a/src/portable/renesas/usba/hcd_usba.c +++ /dev/null @@ -1,875 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021 Koji Kitayama - * Portions copyrighted (c) 2021 Roland Winistoerfer - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -#if CFG_TUH_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_RX63X || \ - CFG_TUSB_MCU == OPT_MCU_RX65X || \ - CFG_TUSB_MCU == OPT_MCU_RX72N ) -#include "host/hcd.h" -#include "iodefine.h" - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define SYSTEM_PRCR_PRC1 (1<<1) -#define SYSTEM_PRCR_PRKEY (0xA5u<<8) - -#define USB_DVSTCTR0_LOW (1u) -#define USB_DVSTCTR0_FULL (2u) - -#define USB_FIFOSEL_TX ((uint16_t)(1u<<5)) -#define USB_FIFOSEL_BIGEND ((uint16_t)(1u<<8)) -#define USB_FIFOSEL_MBW_8 ((uint16_t)(0u<<10)) -#define USB_FIFOSEL_MBW_16 ((uint16_t)(1u<<10)) -#define USB_IS0_CTSQ ((uint16_t)(7u)) -#define USB_IS0_DVSQ ((uint16_t)(7u<<4)) -#define USB_IS0_VALID ((uint16_t)(1u<<3)) -#define USB_IS0_BRDY ((uint16_t)(1u<<8)) -#define USB_IS0_NRDY ((uint16_t)(1u<<9)) -#define USB_IS0_BEMP ((uint16_t)(1u<<10)) -#define USB_IS0_CTRT ((uint16_t)(1u<<11)) -#define USB_IS0_DVST ((uint16_t)(1u<<12)) -#define USB_IS0_SOFR ((uint16_t)(1u<<13)) -#define USB_IS0_RESM ((uint16_t)(1u<<14)) -#define USB_IS0_VBINT ((uint16_t)(1u<<15)) -#define USB_IS1_SACK ((uint16_t)(1u<<4)) -#define USB_IS1_SIGN ((uint16_t)(1u<<5)) -#define USB_IS1_EOFERR ((uint16_t)(1u<<6)) -#define USB_IS1_ATTCH ((uint16_t)(1u<<11)) -#define USB_IS1_DTCH ((uint16_t)(1u<<12)) -#define USB_IS1_BCHG ((uint16_t)(1u<<14)) -#define USB_IS1_OVRCR ((uint16_t)(1u<<15)) - -#define USB_IS0_CTSQ_MSK (7u) -#define USB_IS0_CTSQ_SETUP (1u) -#define USB_IS0_DVSQ_DEF (1u<<4) -#define USB_IS0_DVSQ_ADDR (2u<<4) -#define USB_IS0_DVSQ_SUSP0 (4u<<4) -#define USB_IS0_DVSQ_SUSP1 (5u<<4) -#define USB_IS0_DVSQ_SUSP2 (6u<<4) -#define USB_IS0_DVSQ_SUSP3 (7u<<4) - -#define USB_PIPECTR_PID_MSK (3u) -#define USB_PIPECTR_PID_NAK (0u) -#define USB_PIPECTR_PID_BUF (1u) -#define USB_PIPECTR_PID_STALL (2u) -#define USB_PIPECTR_CCPL (1u<<2) -#define USB_PIPECTR_SQMON (1u<<6) -#define USB_PIPECTR_SQCLR (1u<<8) -#define USB_PIPECTR_ACLRM (1u<<9) -#define USB_PIPECTR_INBUFM (1u<<14) -#define USB_PIPECTR_BSTS (1u<<15) - -#define USB_FIFOCTR_DTLN (0x1FF) -#define USB_FIFOCTR_FRDY (1u<<13) -#define USB_FIFOCTR_BCLR (1u<<14) -#define USB_FIFOCTR_BVAL (1u<<15) - -#define USB_PIPECFG_SHTNAK (1u<<7) -#define USB_PIPECFG_DBLB (1u<<9) -#define USB_PIPECFG_BULK (1u<<14) -#define USB_PIPECFG_ISO (3u<<14) -#define USB_PIPECFG_INT (2u<<14) - -#define USB_DEVADD_LOW (1u<<6) -#define USB_DEVADD_FULL (2u<<6) - -#define FIFO_REQ_CLR (1u) -#define FIFO_COMPLETE (1u<<1) - -// Start of definition of packed structs (used by the CCRX toolchain) -TU_ATTR_PACKED_BEGIN -TU_ATTR_BIT_FIELD_ORDER_BEGIN - -typedef struct { - union { - struct { - uint16_t : 8; - uint16_t TRCLR: 1; - uint16_t TRENB: 1; - uint16_t : 0; - }; - uint16_t TRE; - }; - uint16_t TRN; -} reg_pipetre_t; - -typedef union { - struct { - volatile uint16_t u8: 8; - volatile uint16_t : 0; - }; - volatile uint16_t u16; -} hw_fifo_t; - -typedef struct TU_ATTR_PACKED -{ - void *buf; /* the start address of a transfer data buffer */ - uint16_t length; /* the number of bytes in the buffer */ - uint16_t remaining; /* the number of bytes remaining in the buffer */ - struct { - uint32_t ep : 8; /* an assigned endpoint address */ - uint32_t dev : 8; /* an assigned device address */ - uint32_t ff : 1; /* `buf` is TU_FUFO or POD */ - uint32_t : 0; - }; -} pipe_state_t; - -TU_ATTR_PACKED_END // End of definition of packed structs (used by the CCRX toolchain) -TU_ATTR_BIT_FIELD_ORDER_END - -typedef struct -{ - bool need_reset; /* The device has not been reset after connection. */ - pipe_state_t pipe[10]; - uint8_t ep[4][2][15]; /* a lookup table for a pipe index from an endpoint address */ - uint8_t ctl_mps[5]; /* EP0 max packet size for each device */ -} hcd_data_t; - -//--------------------------------------------------------------------+ -// INTERNAL OBJECT & FUNCTION DECLARATION -//--------------------------------------------------------------------+ -static hcd_data_t _hcd; - -static uint32_t disable_interrupt(void) -{ - uint32_t pswi; -#if defined(__CCRX__) - pswi = get_psw() & 0x010000; - clrpsw_i(); -#else - pswi = __builtin_rx_mvfc(0) & 0x010000; - __builtin_rx_clrpsw('I'); -#endif - return pswi; -} - -static void enable_interrupt(uint32_t pswi) -{ -#if defined(__CCRX__) - set_psw(get_psw() | pswi); -#else - __builtin_rx_mvtc(0, __builtin_rx_mvfc(0) | pswi); -#endif -} - -static unsigned find_pipe(unsigned xfer) -{ - switch (xfer) { - case TUSB_XFER_ISOCHRONOUS: - for (int i = 1; i <= 2; ++i) { - if (0 == _hcd.pipe[i].ep) return i; - } - break; - case TUSB_XFER_BULK: - for (int i = 3; i <= 5; ++i) { - if (0 == _hcd.pipe[i].ep) return i; - } - for (int i = 1; i <= 1; ++i) { - if (0 == _hcd.pipe[i].ep) return i; - } - break; - case TUSB_XFER_INTERRUPT: - for (int i = 6; i <= 9; ++i) { - if (0 == _hcd.pipe[i].ep) return i; - } - break; - default: - /* No support for control transfer */ - break; - } - return 0; -} - -static volatile uint16_t* get_pipectr(unsigned num) -{ - volatile uint16_t *ctr = NULL; - if (num) { - ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD; - ctr += num - 1; - } else { - ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD; - } - return ctr; -} - -static volatile reg_pipetre_t* get_pipetre(unsigned num) -{ - volatile reg_pipetre_t* tre = NULL; - if ((1 <= num) && (num <= 5)) { - tre = (volatile reg_pipetre_t*)&USB0.PIPE1TRE.WORD; - tre += num - 1; - } - return tre; -} - -static volatile uint16_t* addr_to_pipectr(uint8_t dev_addr, unsigned ep_addr) -{ - volatile uint16_t *ctr = NULL; - const unsigned epn = tu_edpt_number(ep_addr); - if (epn) { - const unsigned dir_in = tu_edpt_dir(ep_addr); - const unsigned num = _hcd.ep[dev_addr][dir_in][epn - 1]; - if (num) { - ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD; - ctr += num - 1; - } - } else { - ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD; - } - return ctr; -} - -static unsigned edpt0_max_packet_size(void) -{ - return USB0.DCPMAXP.BIT.MXPS; -} - -static unsigned edpt_max_packet_size(unsigned num) -{ - USB0.PIPESEL.WORD = num; - return USB0.PIPEMAXP.BIT.MXPS; -} - -static inline void pipe_wait_for_ready(unsigned num) -{ - while (USB0.D0FIFOSEL.BIT.CURPIPE != num) ; - while (!USB0.D0FIFOCTR.BIT.FRDY) ; -} - -static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) -{ - volatile hw_fifo_t *reg = (volatile hw_fifo_t*)fifo; - uintptr_t addr = (uintptr_t)buf; - while (len >= 2) { - reg->u16 = *(const uint16_t *)addr; - addr += 2; - len -= 2; - } - if (len) { - reg->u8 = *(const uint8_t *)addr; - ++addr; - } -} - -static void pipe_read_packet(void *buf, volatile void *fifo, unsigned len) -{ - uint8_t *p = (uint8_t*)buf; - volatile uint8_t *reg = (volatile uint8_t*)fifo; /* byte access is always at base register address */ - while (len--) *p++ = *reg; -} - -static bool pipe0_xfer_in(void) -{ - pipe_state_t *pipe = &_hcd.pipe[0]; - const unsigned rem = pipe->remaining; - - const unsigned mps = edpt0_max_packet_size(); - const unsigned vld = USB0.CFIFOCTR.BIT.DTLN; - const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); - void *buf = pipe->buf; - if (len) { - USB0.DCPCTR.WORD = USB_PIPECTR_PID_NAK; - pipe_read_packet(buf, (volatile void*)&USB0.CFIFO.WORD, len); - pipe->buf = (uint8_t*)buf + len; - } - if (len < mps) USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR; - pipe->remaining = rem - len; - if ((len < mps) || (rem == len)) { - pipe->buf = NULL; - return true; - } - USB0.DCPCTR.WORD = USB_PIPECTR_PID_BUF; - return false; -} - -static bool pipe0_xfer_out(void) -{ - pipe_state_t *pipe = &_hcd.pipe[0]; - const unsigned rem = pipe->remaining; - if (!rem) { - pipe->buf = NULL; - return true; - } - const unsigned mps = edpt0_max_packet_size(); - const unsigned len = TU_MIN(mps, rem); - void *buf = pipe->buf; - if (len) { - pipe_write_packet(buf, (volatile void*)&USB0.CFIFO.WORD, len); - pipe->buf = (uint8_t*)buf + len; - } - if (len < mps) USB0.CFIFOCTR.WORD = USB_FIFOCTR_BVAL; - pipe->remaining = rem - len; - return false; -} - -static bool pipe_xfer_in(unsigned num) -{ - pipe_state_t *pipe = &_hcd.pipe[num]; - const unsigned rem = pipe->remaining; - - USB0.D0FIFOSEL.WORD = num | USB_FIFOSEL_MBW_8; - const unsigned mps = edpt_max_packet_size(num); - pipe_wait_for_ready(num); - const unsigned vld = USB0.D0FIFOCTR.BIT.DTLN; - const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); - void *buf = pipe->buf; - if (len) { - pipe_read_packet(buf, (volatile void*)&USB0.D0FIFO.WORD, len); - pipe->buf = (uint8_t*)buf + len; - } - if (len < mps) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BCLR; - USB0.D0FIFOSEL.WORD = 0; - while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - pipe->remaining = rem - len; - if ((len < mps) || (rem == len)) { - pipe->buf = NULL; - return NULL != buf; - } - return false; -} - -static bool pipe_xfer_out(unsigned num) -{ - pipe_state_t *pipe = &_hcd.pipe[num]; - const unsigned rem = pipe->remaining; - - if (!rem) { - pipe->buf = NULL; - return true; - } - - USB0.D0FIFOSEL.WORD = num | USB_FIFOSEL_MBW_16 | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? USB_FIFOSEL_BIGEND : 0); - const unsigned mps = edpt_max_packet_size(num); - pipe_wait_for_ready(num); - const unsigned len = TU_MIN(rem, mps); - void *buf = pipe->buf; - if (len) { - pipe_write_packet(buf, (volatile void*)&USB0.D0FIFO.WORD, len); - pipe->buf = (uint8_t*)buf + len; - } - if (len < mps) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL; - USB0.D0FIFOSEL.WORD = 0; - while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - pipe->remaining = rem - len; - return false; -} - -static bool process_pipe0_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) -{ - (void)dev_addr; - const unsigned dir_in = tu_edpt_dir(ep_addr); - - /* configure fifo direction and access unit settings */ - if (dir_in) { /* IN, a byte */ - USB0.CFIFOSEL.WORD = USB_FIFOSEL_MBW_8; - while (USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX) ; - } else { /* OUT, 2 bytes */ - USB0.CFIFOSEL.WORD = USB_FIFOSEL_TX | USB_FIFOSEL_MBW_16 | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? USB_FIFOSEL_BIGEND : 0); - while (!(USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX)) ; - } - - pipe_state_t *pipe = &_hcd.pipe[0]; - pipe->ep = ep_addr; - pipe->length = buflen; - pipe->remaining = buflen; - if (buflen) { - pipe->buf = buffer; - if (!dir_in) { /* OUT */ - TU_ASSERT(USB0.DCPCTR.BIT.BSTS && (USB0.USBREQ.WORD & 0x80)); - pipe0_xfer_out(); - } - } else { /* ZLP */ - pipe->buf = NULL; - if (!dir_in) { /* OUT */ - USB0.CFIFOCTR.WORD = USB_FIFOCTR_BVAL; - } - if (dir_in == USB0.DCPCFG.BIT.DIR) { - TU_ASSERT(USB_PIPECTR_PID_NAK == USB0.DCPCTR.BIT.PID); - USB0.DCPCTR.BIT.SQSET = 1; - USB0.DCPCFG.BIT.DIR = dir_in ^ 1; - } - } - USB0.DCPCTR.WORD = USB_PIPECTR_PID_BUF; - return true; -} - -static bool process_pipe_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) -{ - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir_in = tu_edpt_dir(ep_addr); - const unsigned num = _hcd.ep[dev_addr - 1][dir_in][epn - 1]; - - TU_ASSERT(num); - - pipe_state_t *pipe = &_hcd.pipe[num]; - pipe->buf = buffer; - pipe->length = buflen; - pipe->remaining = buflen; - if (!dir_in) { /* OUT */ - if (buflen) { - pipe_xfer_out(num); - } else { /* ZLP */ - USB0.D0FIFOSEL.WORD = num; - pipe_wait_for_ready(num); - USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL; - USB0.D0FIFOSEL.WORD = 0; - while (USB0.D0FIFOSEL.BIT.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - } - } else { - volatile uint16_t *ctr = get_pipectr(num); - volatile reg_pipetre_t *pt = get_pipetre(num); - if (pt) { - const unsigned mps = edpt_max_packet_size(num); - if (*ctr & 0x3) *ctr = USB_PIPECTR_PID_NAK; - pt->TRE = TU_BIT(8); - pt->TRN = (buflen + mps - 1) / mps; - pt->TRENB = 1; - } - *ctr = USB_PIPECTR_PID_BUF; - } - return true; -} - -static bool process_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) -{ - const unsigned epn = tu_edpt_number(ep_addr); - if (0 == epn) { - return process_pipe0_xfer(dev_addr, ep_addr, buffer, buflen); - } else { - return process_pipe_xfer(dev_addr, ep_addr, buffer, buflen); - } -} - -static void process_pipe0_bemp(uint8_t rhport) -{ - (void)rhport; - bool completed = pipe0_xfer_out(); - if (completed) { - pipe_state_t *pipe = &_hcd.pipe[0]; - hcd_event_xfer_complete(pipe->dev, - tu_edpt_addr(0, TUSB_DIR_OUT), - pipe->length - pipe->remaining, - XFER_RESULT_SUCCESS, true); - } -} - -static void process_pipe_nrdy(uint8_t rhport, unsigned num) -{ - (void)rhport; - unsigned result; - uint16_t volatile *ctr = get_pipectr(num); - // TU_LOG1("NRDY %d %x\n", num, *ctr); - switch (*ctr & USB_PIPECTR_PID_MSK) { - default: return; - case USB_PIPECTR_PID_STALL: result = XFER_RESULT_STALLED; break; - case USB_PIPECTR_PID_NAK: result = XFER_RESULT_FAILED; break; - } - pipe_state_t *pipe = &_hcd.pipe[num]; - hcd_event_xfer_complete(pipe->dev, pipe->ep, - pipe->length - pipe->remaining, - result, true); -} - -static void process_pipe_brdy(uint8_t rhport, unsigned num) -{ - (void)rhport; - pipe_state_t *pipe = &_hcd.pipe[num]; - const unsigned dir_in = tu_edpt_dir(pipe->ep); - bool completed; - - if (dir_in) { /* IN */ - if (num) { - completed = pipe_xfer_in(num); - } else { - completed = pipe0_xfer_in(); - } - } else { - completed = pipe_xfer_out(num); - } - if (completed) { - hcd_event_xfer_complete(pipe->dev, pipe->ep, - pipe->length - pipe->remaining, - XFER_RESULT_SUCCESS, true); - // TU_LOG1("C %d %d\r\n", num, pipe->length - pipe->remaining); - } -} - - -/*------------------------------------------------------------------*/ -/* Host API - *------------------------------------------------------------------*/ -bool hcd_init(uint8_t rhport) -{ - (void)rhport; - /* Enable USB0 */ - uint32_t pswi = disable_interrupt(); - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; - MSTP(USB0) = 0; - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; - enable_interrupt(pswi); - USB0.SYSCFG.BIT.SCKE = 1; - while (!USB0.SYSCFG.BIT.SCKE) ; - USB0.SYSCFG.BIT.DPRPU = 0; - USB0.SYSCFG.BIT.DRPD = 0; - USB0.SYSCFG.BIT.DCFM = 1; - - USB0.DVSTCTR0.BIT.VBUSEN = 1; - - USB0.SYSCFG.BIT.DRPD = 1; - for (volatile int i = 0; i < 30000; ++i) ; - USB0.SYSCFG.BIT.USBE = 1; - - USB.DPUSR0R.BIT.FIXPHY0 = 0u; /* USB0 Transceiver Output fixed */ -#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) - USB0.PHYSLEW.LONG = 0x5; - IR(PERIB, INTB185) = 0; -#else - IR(USB0, USBI0) = 0; -#endif - - /* Setup default control pipe */ - USB0.DCPCFG.WORD = USB_PIPECFG_SHTNAK; - USB0.DCPMAXP.WORD = 64; - USB0.INTENB0.WORD = USB_IS0_BRDY | USB_IS0_NRDY | USB_IS0_BEMP; - USB0.INTENB1.WORD = USB_IS1_SACK | USB_IS1_SIGN | - USB_IS1_ATTCH | USB_IS1_DTCH; - USB0.BEMPENB.WORD = 1; - USB0.NRDYENB.WORD = 1; - USB0.BRDYENB.WORD = 1; - return true; -} - -void hcd_int_enable(uint8_t rhport) -{ - (void)rhport; -#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) - IEN(PERIB, INTB185) = 1; -#else - IEN(USB0, USBI0) = 1; -#endif -} - -void hcd_int_disable(uint8_t rhport) -{ - (void)rhport; -#if ( CFG_TUSB_MCU == OPT_MCU_RX72N ) - IEN(PERIB, INTB185) = 0; -#else - IEN(USB0, USBI0) = 0; -#endif -} - -uint32_t hcd_frame_number(uint8_t rhport) -{ - (void)rhport; - /* The device must be reset at least once after connection - * in order to start the frame counter. */ - if (_hcd.need_reset) hcd_port_reset(rhport); - return USB0.FRMNUM.BIT.FRNM; -} - -/*--------------------------------------------------------------------+ - * Port API - *--------------------------------------------------------------------+*/ -bool hcd_port_connect_status(uint8_t rhport) -{ - (void)rhport; - return USB0.INTSTS1.BIT.ATTCH ? true: false; -} - -void hcd_port_reset(uint8_t rhport) -{ - USB0.DCPCTR.WORD = USB_PIPECTR_PID_NAK; - while (USB0.DCPCTR.BIT.PBUSY) ; - hcd_int_disable(rhport); - USB0.DVSTCTR0.BIT.UACT = 0; - if (USB0.DCPCTR.BIT.SUREQ) - USB0.DCPCTR.BIT.SUREQCLR = 1; - hcd_int_enable(rhport); - /* Reset should be asserted 10-20ms. */ - USB0.DVSTCTR0.BIT.USBRST = 1; - for (volatile int i = 0; i < 2400000; ++i) ; - USB0.DVSTCTR0.BIT.USBRST = 0; - USB0.DVSTCTR0.BIT.UACT = 1; - _hcd.need_reset = false; -} - -void hcd_port_reset_end(uint8_t rhport) -{ - (void) rhport; -} - -tusb_speed_t hcd_port_speed_get(uint8_t rhport) -{ - (void)rhport; - switch (USB0.DVSTCTR0.BIT.RHST) { - default: return TUSB_SPEED_INVALID; - case USB_DVSTCTR0_FULL: return TUSB_SPEED_FULL; - case USB_DVSTCTR0_LOW: return TUSB_SPEED_LOW; - } -} - -void hcd_device_close(uint8_t rhport, uint8_t dev_addr) -{ - (void)rhport; - uint16_t volatile *ctr; - TU_ASSERT(dev_addr < 6,); /* USBa can only handle addresses from 0 to 5. */ - if (!dev_addr) return; - _hcd.ctl_mps[dev_addr] = 0; - uint8_t *ep = &_hcd.ep[dev_addr - 1][0][0]; - for (int i = 0; i < 2 * 15; ++i, ++ep) { - unsigned num = *ep; - if (!num || dev_addr != _hcd.pipe[num].dev) continue; - - ctr = (uint16_t volatile*)&USB0.PIPE1CTR.WORD + num - 1; - *ctr = 0; - USB0.NRDYENB.WORD &= ~TU_BIT(num); - USB0.BRDYENB.WORD &= ~TU_BIT(num); - USB0.PIPESEL.WORD = num; - USB0.PIPECFG.WORD = 0; - USB0.PIPEMAXP.WORD = 0; - - _hcd.pipe[num].ep = 0; - _hcd.pipe[num].dev = 0; - *ep = 0; - } -} - -/*--------------------------------------------------------------------+ - * Endpoints API - *--------------------------------------------------------------------+*/ -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) -{ - (void)rhport; - // TU_LOG1("S %d %x\n", dev_addr, USB0.DCPCTR.WORD); - - TU_ASSERT(dev_addr < 6); /* USBa can only handle addresses from 0 to 5. */ - TU_ASSERT(0 == USB0.DCPCTR.BIT.SUREQ); - - USB0.DCPCTR.WORD = USB_PIPECTR_PID_NAK; - - _hcd.pipe[0].buf = NULL; - _hcd.pipe[0].length = 8; - _hcd.pipe[0].remaining = 0; - _hcd.pipe[0].dev = dev_addr; - - while (USB0.DCPCTR.BIT.PBUSY) ; - USB0.DCPMAXP.WORD = (dev_addr << 12) | _hcd.ctl_mps[dev_addr]; - - /* Set direction in advance for DATA stage */ - uint8_t const bmRequesttype = setup_packet[0]; - USB0.DCPCFG.BIT.DIR = tu_edpt_dir(bmRequesttype) ? 0: 1; - - uint16_t const* p = (uint16_t const*)(uintptr_t)&setup_packet[0]; - USB0.USBREQ.WORD = tu_htole16(p[0]); - USB0.USBVAL = p[1]; - USB0.USBINDX = p[2]; - USB0.USBLENG = p[3]; - - USB0.DCPCTR.BIT.SUREQ = 1; - return true; -} - -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) -{ - (void)rhport; - TU_ASSERT(dev_addr < 6); /* USBa can only handle addresses from 0 to 5. */ - - const unsigned ep_addr = ep_desc->bEndpointAddress; - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned mps = tu_edpt_packet_size(ep_desc); - if (0 == epn) { - USB0.DCPCTR.WORD = USB_PIPECTR_PID_NAK; - hcd_devtree_info_t devtree; - hcd_devtree_get_info(dev_addr, &devtree); - uint16_t volatile *devadd = (uint16_t volatile *)(uintptr_t)&USB0.DEVADD0.WORD; - devadd += dev_addr; - while (USB0.DCPCTR.BIT.PBUSY) ; - USB0.DCPMAXP.WORD = (dev_addr << 12) | mps; - *devadd = (TUSB_SPEED_FULL == devtree.speed) ? USB_DEVADD_FULL : USB_DEVADD_LOW; - _hcd.ctl_mps[dev_addr] = mps; - return true; - } - - const unsigned dir_in = tu_edpt_dir(ep_addr); - const unsigned xfer = ep_desc->bmAttributes.xfer; - if (xfer == TUSB_XFER_ISOCHRONOUS && mps > 256) { - /* USBa supports up to 256 bytes */ - return false; - } - const unsigned num = find_pipe(xfer); - if (!num) return false; - _hcd.pipe[num].dev = dev_addr; - _hcd.pipe[num].ep = ep_addr; - _hcd.ep[dev_addr - 1][dir_in][epn - 1] = num; - - /* setup pipe */ - hcd_int_disable(rhport); - USB0.PIPESEL.WORD = num; - USB0.PIPEMAXP.WORD = (dev_addr << 12) | mps; - volatile uint16_t *ctr = get_pipectr(num); - *ctr = USB_PIPECTR_ACLRM | USB_PIPECTR_SQCLR; - *ctr = 0; - unsigned cfg = ((1 ^ dir_in) << 4) | epn; - if (xfer == TUSB_XFER_BULK) { - cfg |= USB_PIPECFG_BULK | USB_PIPECFG_SHTNAK | USB_PIPECFG_DBLB; - } else if (xfer == TUSB_XFER_INTERRUPT) { - cfg |= USB_PIPECFG_INT; - } else { - cfg |= USB_PIPECFG_ISO | USB_PIPECFG_DBLB; - } - USB0.PIPECFG.WORD = cfg; - USB0.BRDYSTS.WORD = 0x1FFu ^ TU_BIT(num); - USB0.NRDYENB.WORD |= TU_BIT(num); - USB0.BRDYENB.WORD |= TU_BIT(num); - if (!dir_in) { - *ctr = USB_PIPECTR_PID_BUF; - } - hcd_int_enable(rhport); - - return true; -} - -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) -{ - bool r; - hcd_int_disable(rhport); - // TU_LOG1("X %d %x %u\n", dev_addr, ep_addr, buflen); - r = process_edpt_xfer(dev_addr, ep_addr, buffer, buflen); - hcd_int_enable(rhport); - return r; -} - -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ - uint16_t volatile *ctr = addr_to_pipectr(dev_addr, ep_addr); - TU_ASSERT(ctr); - - const uint32_t pid = *ctr & 0x3; - if (pid & 2) { - *ctr = pid & 2; - *ctr = 0; - } - *ctr = USB_PIPECTR_SQCLR; - unsigned const epn = tu_edpt_number(ep_addr); - if (!epn) return true; - - if (!tu_edpt_dir(ep_addr)) { /* OUT */ - *ctr = USB_PIPECTR_PID_BUF; - } - return true; -} - -//--------------------------------------------------------------------+ -// ISR -//--------------------------------------------------------------------+ -void hcd_int_handler(uint8_t rhport) -{ - (void)rhport; -#if defined(__CCRX__) - static const int Mod37BitPosition[] = { - -1, 0, 1, 26, 2, 23, 27, 0, 3, 16, 24, 30, 28, 11, 0, 13, 4, - 7, 17, 0, 25, 22, 31, 15, 29, 10, 12, 6, 0, 21, 14, 9, 5, - 20, 8, 19, 18}; -#endif - - unsigned is1 = USB0.INTSTS1.WORD; - unsigned is0 = USB0.INTSTS0.WORD; - /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ - USB0.INTSTS1.WORD = ~((USB_IS1_SACK | USB_IS1_SIGN | USB_IS1_ATTCH | USB_IS1_DTCH) & is1); - USB0.INTSTS0.WORD = ~((USB_IS0_BRDY | USB_IS0_NRDY | USB_IS0_BEMP) & is0); - // TU_LOG1("IS %04x %04x\n", is0, is1); - is1 &= USB0.INTENB1.WORD; - is0 &= USB0.INTENB0.WORD; - - if (is1 & USB_IS1_SACK) { - /* Set DATA1 in advance for the next transfer. */ - USB0.DCPCTR.BIT.SQSET = 1; - hcd_event_xfer_complete(USB0.DCPMAXP.BIT.DEVSEL, - tu_edpt_addr(0, TUSB_DIR_OUT), - 8, XFER_RESULT_SUCCESS, true); - } - if (is1 & USB_IS1_SIGN) { - hcd_event_xfer_complete(USB0.DCPMAXP.BIT.DEVSEL, - tu_edpt_addr(0, TUSB_DIR_OUT), - 8, XFER_RESULT_FAILED, true); - } - if (is1 & USB_IS1_ATTCH) { - USB0.DVSTCTR0.BIT.UACT = 1; - _hcd.need_reset = true; - USB0.INTENB1.WORD = (USB0.INTENB1.WORD & ~USB_IS1_ATTCH) | USB_IS1_DTCH; - hcd_event_device_attach(rhport, true); - } - if (is1 & USB_IS1_DTCH) { - USB0.DVSTCTR0.BIT.UACT = 0; - if (USB0.DCPCTR.BIT.SUREQ) - USB0.DCPCTR.BIT.SUREQCLR = 1; - USB0.INTENB1.WORD = (USB0.INTENB1.WORD & ~USB_IS1_DTCH) | USB_IS1_ATTCH; - hcd_event_device_remove(rhport, true); - } - - if (is0 & USB_IS0_BEMP) { - const unsigned s = USB0.BEMPSTS.WORD; - USB0.BEMPSTS.WORD = 0; - if (s & 1) { - process_pipe0_bemp(rhport); - } - } - if (is0 & USB_IS0_NRDY) { - const unsigned m = USB0.NRDYENB.WORD; - unsigned s = USB0.NRDYSTS.WORD & m; - USB0.NRDYSTS.WORD = ~s; - while (s) { -#if defined(__CCRX__) - const unsigned num = Mod37BitPosition[(-s & s) % 37]; -#else - const unsigned num = __builtin_ctz(s); -#endif - process_pipe_nrdy(rhport, num); - s &= ~TU_BIT(num); - } - } - if (is0 & USB_IS0_BRDY) { - const unsigned m = USB0.BRDYENB.WORD; - unsigned s = USB0.BRDYSTS.WORD & m; - /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ - USB0.BRDYSTS.WORD = ~s; - while (s) { -#if defined(__CCRX__) - const unsigned num = Mod37BitPosition[(-s & s) % 37]; -#else - const unsigned num = __builtin_ctz(s); -#endif - process_pipe_brdy(rhport, num); - s &= ~TU_BIT(num); - } - } -} - -#endif -- cgit v1.3.1 From 0bf0e0b35f55e6906daeeb3615aa1e35503ee8e6 Mon Sep 17 00:00:00 2001 From: Rafael Silva Date: Wed, 9 Mar 2022 12:22:18 +0000 Subject: add renesas ra mcu family to supported devices docs Signed-off-by: Rafael Silva --- README.rst | 6 +++++- docs/reference/supported.rst | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index 5b994c357..0877c14d1 100644 --- a/README.rst +++ b/README.rst @@ -48,7 +48,11 @@ The stack supports the following MCUs: - LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55 - **Raspberry Pi:** RP2040 -- **Renesas:** RX63N, RX65N, RX72N +- **Renesas:** + + - RX Series: 63N, 65N, 72N + - RA Series: RA2A1, RA2E1, RA2E2, RA2l1, RA4E1, RA4M1, RA4M2, RA4M3, RA4W1, RA6E1, RA6M1, RA6M2, RA6M3, RA6M4, RA6M5, RA6T1, RA6T2 + - **Silabs:** EFM32GG - **Sony:** CXD56 - **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G4, L0, L1, L4, L4+ diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 3c1b94623..02da501eb 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -61,6 +61,8 @@ Supported MCUs | Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040 | | +--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | link | | +| +-----+-----------------+--------+------+-----------+-------------------+--------------+ +| | RA | XXX | ✔ | ✔ | | link | | +--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -- cgit v1.3.1 From 12341118e373cce10cb868f234009e9d37bff940 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 1 Jul 2022 16:24:58 +0700 Subject: add get-deps target update ci to get-deps first --- .github/workflows/build_arm.yml | 13 +++++++++---- docs/reference/getting_started.rst | 7 ++++++- examples/make.mk | 5 ----- examples/rules.mk | 27 ++++++++++++++++++--------- 4 files changed, 33 insertions(+), 19 deletions(-) (limited to 'docs/reference') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 27cb9f1f7..7cc1b10f9 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -67,6 +67,11 @@ jobs: - name: Setup Python uses: actions/setup-python@v3 + - name: Install ARM GCC + uses: carlosperate/arm-none-eabi-gcc-action@v1 + with: + release: '11.2-2022.02' + - name: Checkout TinyUSB uses: actions/checkout@v3 @@ -86,10 +91,10 @@ jobs: echo >> $GITHUB_ENV PICO_SDK_PATH=~/pico-sdk git submodule update --init hw/mcu/raspberry_pi/Pico-PIO-USB - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '11.2-2022.02' + - name: Get Dependencies + run: | + b=`find hw/bsp/${{ matrix.family }}/boards -depth -maxdepth 1 -type d -name '[^.]?*' -printf %f -quit` + make BOARD={b} get-deps - name: Build run: python3 tools/build_family.py ${{ matrix.family }} diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index fa5c51eff..1088d4700 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -50,7 +50,12 @@ Some TinyUSB examples also requires external submodule libraries in ``/lib`` suc $ git submodule update --init lib -In addition, MCU driver submodule is also needed to provide low-level MCU peripheral's driver. Luckily, it will be fetched if needed when you run the ``make`` to build your board. +In addition, MCU driver submodule is also needed to provide low-level MCU peripheral's driver. To download these depencies for your board, run the ``get-dpes`` as follow. + +.. code-block:: + + $ make BOARD=feather_nrf52840_express get-deps + Some modules will also require a module-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. diff --git a/examples/make.mk b/examples/make.mk index 27e1db38c..47520d660 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -45,11 +45,6 @@ else SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) endif -# Fetch submodules depended by family -fetch_submodule_if_empty = $(if $(wildcard $(TOP)/$1/*),,$(info $(shell git -C $(TOP) submodule update --init $1))) -ifdef DEPS_SUBMODULES - $(foreach s,$(DEPS_SUBMODULES),$(call fetch_submodule_if_empty,$(s))) -endif #-------------- Cross Compiler ------------ # Can be set by board, default to ARM GCC diff --git a/examples/rules.mk b/examples/rules.mk index 538dffbcf..c3134056a 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -5,6 +5,7 @@ # Set all as default goal .DEFAULT_GOAL := all +# ---------------- GNU Make Start ----------------------- # ESP32-Sx and RP2040 has its own CMake build system ifeq (,$(findstring $(FAMILY),esp32s2 esp32s3 rp2040)) @@ -141,7 +142,23 @@ $(BUILD)/obj/%_asm.o: %.S @echo AS $(notdir $@) @$(CC) -x assembler-with-cpp $(ASFLAGS) -c -o $@ $< -endif # GNU Make +endif + +.PHONY: clean +clean: +ifeq ($(CMDEXE),1) + rd /S /Q $(subst /,\,$(BUILD)) +else + $(RM) -rf $(BUILD) +endif +# ---------------- GNU Make End ----------------------- + +# get depenecies +.PHONY: get-deps +get-deps: + ifdef DEPS_SUBMODULES + git -C $(TOP) submodule update --init $(DEPS_SUBMODULES) + endif size: $(BUILD)/$(PROJECT).elf -@echo '' @@ -152,14 +169,6 @@ size: $(BUILD)/$(PROJECT).elf linkermap: $(BUILD)/$(PROJECT).elf @linkermap -v $<.map -.PHONY: clean -clean: -ifeq ($(CMDEXE),1) - rd /S /Q $(subst /,\,$(BUILD)) -else - $(RM) -rf $(BUILD) -endif - # --------------------------------------- # Flash Targets # --------------------------------------- -- cgit v1.3.1 From b0b155c9491d9e8cfc3d40366f77accfd3302cec Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 19 Jul 2022 12:28:52 +0700 Subject: increase version for release along with minor doc update --- README.rst | 4 ++-- docs/reference/getting_started.rst | 19 +++++++++---------- src/tusb_option.h | 2 +- 3 files changed, 12 insertions(+), 13 deletions(-) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index 1a96f6e16..92cb0ba6c 100644 --- a/README.rst +++ b/README.rst @@ -94,8 +94,8 @@ TinyUSB is completely thread-safe by pushing all Interrupt Service Request (ISR) - `RT-Thread `_: `repo `_ - **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its `own repo `_ -Local Docs -========== +Docs +==== - Info diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 1088d4700..3cdb46849 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -50,16 +50,7 @@ Some TinyUSB examples also requires external submodule libraries in ``/lib`` suc $ git submodule update --init lib -In addition, MCU driver submodule is also needed to provide low-level MCU peripheral's driver. To download these depencies for your board, run the ``get-dpes`` as follow. - -.. code-block:: - - $ make BOARD=feather_nrf52840_express get-deps - - -Some modules will also require a module-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. - -Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``/examples/device/99-tinyusb.rules`` file to /etc/udev/rules.d/ then run ``sudo udevadm control --reload-rules && sudo udevadm trigger`` is good enough. +Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for tinyusb, you should download/install it first according to its manufacturer guide. Build ^^^^^ @@ -70,6 +61,13 @@ To build example, first change directory to an example folder. $ cd examples/device/cdc_msc +Before building, we need to download MCU driver submodule to provide low-level MCU peripheral's driver first. Run the ``get-dpes`` target in one of the example folder as follow. You only need to do this once per mcu + +.. code-block:: + + $ make BOARD=feather_nrf52840_express get-deps + + Some modules (e.g. RP2040 and ESP32s2) require the project makefiles to be customized using CMake. If necessary apply any setup steps for the platform's SDK. Then compile with ``make BOARD=[board_name] all``\ , for example @@ -79,6 +77,7 @@ Then compile with ``make BOARD=[board_name] all``\ , for example $ make BOARD=feather_nrf52840_express all Note: ``BOARD`` can be found as directory name in ``hw/bsp``\ , either in its family/boards or directly under bsp (no family). +Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``/examples/device/99-tinyusb.rules`` file to /etc/udev/rules.d/ then run ``sudo udevadm control --reload-rules && sudo udevadm trigger`` is good enough. Port Selection ~~~~~~~~~~~~~~ diff --git a/src/tusb_option.h b/src/tusb_option.h index 70ef1c399..a557c785a 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -33,7 +33,7 @@ typedef int make_iso_compilers_happy; #include "common/tusb_compiler.h" #define TUSB_VERSION_MAJOR 0 -#define TUSB_VERSION_MINOR 13 +#define TUSB_VERSION_MINOR 14 #define TUSB_VERSION_REVISION 0 #define TUSB_VERSION_STRING TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION) -- cgit v1.3.1 From 23ea8d1e255b00be6916f7d3ca0a1fba60c68ef4 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 25 Jul 2022 22:27:33 +0700 Subject: update doc --- README.rst | 2 +- docs/reference/supported.rst | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index 92cb0ba6c..ba176a8c8 100644 --- a/README.rst +++ b/README.rst @@ -43,7 +43,7 @@ The stack supports the following MCUs: - **Nuvoton:** NUC120, NUC121/NUC125, NUC126, NUC505 - **NXP:** - - iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064 + - iMX RT Series: RT10xx, RT11xx - Kinetis: KL25, K32L2 - LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55 diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 7ce982713..ad2af98ff 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -41,6 +41,8 @@ Supported MCUs | | NUC505 | ✔ | | ✔ | | | +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | NXP | iMXRT | RT10xx | ✔ | ✔ | ✔ | ci_hs | | +| | +-------------+--------+------+-----------+-------------------+--------------+ +| | | RT11xx | ✔ | ✔ | ✔ | ci_hs | | | +---------+-------------+--------+------+-----------+-------------------+--------------+ | | Kinetis | KL25 | ✔ | ⚠ | ✖ | | | | | +-------------+--------+------+-----------+-------------------+--------------+ -- cgit v1.3.1 From 961e83e0836879ef9010184404c0f61c933035bf Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 19 Aug 2022 17:11:40 +0700 Subject: more docs update --- README.rst | 2 +- docs/info/changelog.rst | 58 ++++++++++++++++++++++++++++++++++++++++++++ docs/reference/supported.rst | 9 ++++++- 3 files changed, 67 insertions(+), 2 deletions(-) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index ba176a8c8..05963a655 100644 --- a/README.rst +++ b/README.rst @@ -51,7 +51,7 @@ The stack supports the following MCUs: - **Renesas:** RX63N, RX65N, RX72N - **Silabs:** EFM32GG - **Sony:** CXD56 -- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G4, L0, L1, L4, L4+ +- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G4, L0, L1, L4, L4+, WB - **TI:** MSP430, MSP432E4, TM4C123 - **ValentyUSB:** eptri diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index bd6712b93..67bb6af65 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -2,6 +2,64 @@ Changelog ********* +0.14.0 +====== + +- Improve compiler support for CCRX and IAR +- Add timeout to osal_queue_receive() +- Add tud_task_ext(timeout, in_isr) as generic version of tud_task(). Same as tuh_task_ext(), tuh_task() +- Enable more warnings -Wnull-dereference -Wuninitialized -Wunused -Wredundant-decls -Wconversion +- Add new examples + - host/bare_api to demonstrate generic (app-level) enumeration and endpoint transfer + - dual/host_hid_to_device_cdc to run both device and host stack concurrently, get HID report from host and print out to device CDC. This example only work with multiple-controller MCUs and rp2040 with the help of pio-usb as added controller. + +Controller Driver (DCD & HCD) +----------------------------- + +- Enhance rhports management to better support dual roles + - CFG_TUD_ENABLED/CFG_TUH_ENABLED, CFG_TUD_MAX_SPEED/CFG_TUH_MAX_SPEED can be used to replace CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE + - tud_init(rphort), tuh_init(rhport) can be used to init stack on specified roothub port (controller) instead of tusb_init(void) +- Add dcd/hcd port specific defines TUP_ (stand for tinyusb port-specific) +- [dwc2] + - Update to support stm32 h72x, h73x with only 1 otg controller + - Fix overwrite with grstctl when disable endpoint +- [EHCI] Fix an issue with EHCI driver +- [msp430] Fix for possible bug in msp430-elf-gcc 9.3.0 +- [nrf5x] Fix DMA access race condition using atomic function +- [pic32] Fix PIC32 santiy +- [rp2040] + - Add PICO-PIO-USB as controller (device/host) support for rp2040 + - Use shared IRQ handlers, so user can also hook the USB IRQ + - Fix resumed signal not reported to device stack +- [stm32fsdev] Add support for stm32wb55 + +Device Stack +------------ + +- [Audio] Add support for feedback endpoint computation + - New API tud_audio_feedback_params_cb(), tud_audio_feedback_interval_isr(). + - Supported computation method are: frequency with fixed/float or power of 2. Feedback with fifo count is not yet supported. + - Fix nitfs (should be 3) in TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR + - Fix typo in audiod_rx_done_cb() +- [DFU] Fix coexistence with other interfaces BTH, RNDIS +- [MSC] Fix inquiry response additional length field +- [Venndor] Improve write performance + +Host Stack +---------- + +- Add new API tuh_configure(rhport, cfg_id, cfg_param) for dynamnic port specific behavior configuration +- [HID] Open OUT endpoint if available +- [Hub] hub clear port and device interrupts +- [USBH] Major improvement + - Rework usbh control transfer with complete callback. New API tuh_control_xfer() though still only carry 1 usbh (no queueing) at a time. + - Add generic endpoint transfer with tuh_edpt_open(), tuh_edpt_xfer(). Require `CFG_TUH_API_EDPT_XFER=1` + - Support app-level enumeration with new APIs + - tuh_descriptor_get(), tuh_descriptor_get_device(), tuh_descriptor_get_configuration(), tuh_descriptor_get_hid_report() + - tuh_descriptor_get_string(), tuh_descriptor_get_manufacturer_string(), tuh_descriptor_get_product_string(), tuh_descriptor_get_serial_string() + - Also add _sync() as sync/blocking version for above APIs + + 0.13.0 ====== diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index ad2af98ff..1fb858a45 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -60,7 +60,7 @@ Supported MCUs | | +-------------+--------+------+-----------+-------------------+--------------+ | | | 55 | ✔ | | ✔ | lpc_ip3511 | | +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ -| Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040 | | +| Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040, pio_usb | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Renesas | RX 63N, 65N, 72N | ✔ | ✔ | ✖ | usba | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ @@ -95,6 +95,8 @@ Supported MCUs | | L4+ | ✔ | | | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ | | U5 | ⚠ | | | dwc2 | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | WBx5 | ✔ | | | stm32_fsdev | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | | +-----------------------+--------+------+-----------+-------------------+--------------+ @@ -241,6 +243,7 @@ iMX RT - `MIMX RT1060 Evaluation Kit `__ - `MIMX RT1064 Evaluation Kit `__ - `Teensy 4.0 Development Board `__ +- `Teensy 4.1 Development Board `__ Kinetis ^^^^^^^ @@ -379,6 +382,10 @@ L4 - `STM32 L4P5zg Nucleo `__ - `STM32 L4R5zi Nucleo `__ +WB +^^ +- `STM32 WB55 Nucleo `__ + TI -- -- cgit v1.3.1 From 8f88ff559eb930b26233d19ae9df75f3a5c6a786 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Tue, 18 Oct 2022 15:14:45 +0200 Subject: Fix typo in getting_started guide Fixes: 1234111 ("add get-deps target") --- docs/reference/getting_started.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/reference') diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 3cdb46849..e328757ba 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -61,7 +61,7 @@ To build example, first change directory to an example folder. $ cd examples/device/cdc_msc -Before building, we need to download MCU driver submodule to provide low-level MCU peripheral's driver first. Run the ``get-dpes`` target in one of the example folder as follow. You only need to do this once per mcu +Before building, we need to download MCU driver submodule to provide low-level MCU peripheral's driver first. Run the ``get-deps`` target in one of the example folder as follow. You only need to do this once per mcu .. code-block:: -- cgit v1.3.1 From 92aed7e3e0600570da239729d1e83ede69be8158 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Mar 2023 11:28:10 +0700 Subject: rename symbols --- docs/reference/supported.rst | 4 +- src/portable/renesas/rusb2/dcd_rusb2.c | 276 ++++---- src/portable/renesas/rusb2/hcd_rusb2.c | 294 ++++---- src/portable/renesas/rusb2/rusb2_ra.h | 10 +- src/portable/renesas/rusb2/rusb2_rx.h | 8 +- src/portable/renesas/rusb2/rusb2_type.h | 1138 +++++++++++++++---------------- 6 files changed, 864 insertions(+), 866 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 30a685854..ae16d361d 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -62,9 +62,9 @@ Supported MCUs +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040, pio_usb | | +--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ -| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | link | | +| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | | +-----+-----------------+--------+------+-----------+-------------------+--------------+ -| | RA | XXX | ✔ | ✔ | | link | | +| | RA | XXX | ✔ | ✔ | | rusb2 | | +--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index ec9caab2c..78584125f 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -51,9 +51,9 @@ /* LINK core registers */ #if defined(__CCRX__) -#define LINK_REG ((LINK_REG_t __evenaccess*)LINK_REG_BASE) + #define RUSB2 ((RUSB2_REG_t __evenaccess*) RUSB2_REG_BASE) #else -#define LINK_REG ((LINK_REG_t*)LINK_REG_BASE) + #define RUSB2 ((RUSB2_REG_t*) RUSB2_REG_BASE) #endif /* Start of definition of packed structs (used by the CCRX toolchain) */ @@ -138,9 +138,9 @@ static unsigned find_pipe(unsigned xfer) static volatile uint16_t* get_pipectr(unsigned num) { if (num) { - return (volatile uint16_t*)&(LINK_REG->PIPE_CTR[num - 1]); + return (volatile uint16_t*)&(RUSB2->PIPE_CTR[num - 1]); } else { - return (volatile uint16_t*)&(LINK_REG->DCPCTR); + return (volatile uint16_t*)&(RUSB2->DCPCTR); } } @@ -148,7 +148,7 @@ static volatile reg_pipetre_t* get_pipetre(unsigned num) { volatile reg_pipetre_t* tre = NULL; if ((1 <= num) && (num <= 5)) { - tre = (volatile reg_pipetre_t*)&(LINK_REG->PIPE_TR[num - 1].E); + tre = (volatile reg_pipetre_t*)&(RUSB2->PIPE_TR[num - 1].E); } return tre; } @@ -168,19 +168,19 @@ static volatile uint16_t* ep_addr_to_pipectr(uint8_t rhport, unsigned ep_addr) static unsigned edpt0_max_packet_size(void) { - return LINK_REG->DCPMAXP_b.MXPS; + return RUSB2->DCPMAXP_b.MXPS; } static unsigned edpt_max_packet_size(unsigned num) { - LINK_REG->PIPESEL = num; - return LINK_REG->PIPEMAXP; + RUSB2->PIPESEL = num; + return RUSB2->PIPEMAXP; } static inline void pipe_wait_for_ready(unsigned num) { - while (LINK_REG->D0FIFOSEL_b.CURPIPE != num) ; - while (!LINK_REG->D0FIFOCTR_b.FRDY) ; + while (RUSB2->D0FIFOSEL_b.CURPIPE != num) ; + while (!RUSB2->D0FIFOCTR_b.FRDY) ; } static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) @@ -242,14 +242,14 @@ static bool pipe0_xfer_in(void) void *buf = pipe->buf; if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&LINK_REG->CFIFO, len, TUSB_DIR_IN); + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&RUSB2->CFIFO, len, TUSB_DIR_IN); } else { - pipe_write_packet(buf, (volatile void*)&LINK_REG->CFIFO, len); + pipe_write_packet(buf, (volatile void*)&RUSB2->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } } if (len < mps) { - LINK_REG->CFIFOCTR = LINK_REG_CFIFOCTR_BVAL_Msk; + RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; } pipe->remaining = rem - len; return false; @@ -261,19 +261,19 @@ static bool pipe0_xfer_out(void) const unsigned rem = pipe->remaining; const unsigned mps = edpt0_max_packet_size(); - const unsigned vld = LINK_REG->CFIFOCTR_b.DTLN; + const unsigned vld = RUSB2->CFIFOCTR_b.DTLN; const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); void *buf = pipe->buf; if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&LINK_REG->CFIFO, len, TUSB_DIR_OUT); + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&RUSB2->CFIFO, len, TUSB_DIR_OUT); } else { - pipe_read_packet(buf, (volatile void*)&LINK_REG->CFIFO, len); + pipe_read_packet(buf, (volatile void*)&RUSB2->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } } if (len < mps) { - LINK_REG->CFIFOCTR = LINK_REG_CFIFOCTR_BCLR_Msk; + RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; } pipe->remaining = rem - len; if ((len < mps) || (rem == len)) { @@ -293,24 +293,24 @@ static bool pipe_xfer_in(unsigned num) return true; } - LINK_REG->D0FIFOSEL = num | LINK_REG_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? LINK_REG_FIFOSEL_BIGEND : 0); + RUSB2->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); const unsigned mps = edpt_max_packet_size(num); pipe_wait_for_ready(num); const unsigned len = TU_MIN(rem, mps); void *buf = pipe->buf; if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&LINK_REG->D0FIFO, len, TUSB_DIR_IN); + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&RUSB2->D0FIFO, len, TUSB_DIR_IN); } else { - pipe_write_packet(buf, (volatile void*)&LINK_REG->D0FIFO, len); + pipe_write_packet(buf, (volatile void*)&RUSB2->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } } if (len < mps) { - LINK_REG->D0FIFOCTR = LINK_REG_CFIFOCTR_BVAL_Msk; + RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; } - LINK_REG->D0FIFOSEL = 0; - while (LINK_REG->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + RUSB2->D0FIFOSEL = 0; + while (RUSB2->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ pipe->remaining = rem - len; return false; } @@ -320,25 +320,25 @@ static bool pipe_xfer_out(unsigned num) pipe_state_t *pipe = &_dcd.pipe[num]; const unsigned rem = pipe->remaining; - LINK_REG->D0FIFOSEL = num | LINK_REG_FIFOSEL_MBW_8BIT; + RUSB2->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_8BIT; const unsigned mps = edpt_max_packet_size(num); pipe_wait_for_ready(num); - const unsigned vld = LINK_REG->D0FIFOCTR_b.DTLN; + const unsigned vld = RUSB2->D0FIFOCTR_b.DTLN; const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); void *buf = pipe->buf; if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&LINK_REG->D0FIFO, len, TUSB_DIR_OUT); + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&RUSB2->D0FIFO, len, TUSB_DIR_OUT); } else { - pipe_read_packet(buf, (volatile void*)&LINK_REG->D0FIFO, len); + pipe_read_packet(buf, (volatile void*)&RUSB2->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } } if (len < mps) { - LINK_REG->D0FIFOCTR = LINK_REG_CFIFOCTR_BCLR_Msk; + RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; } - LINK_REG->D0FIFOSEL = 0; - while (LINK_REG->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + RUSB2->D0FIFOSEL = 0; + while (RUSB2->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ pipe->remaining = rem - len; if ((len < mps) || (rem == len)) { pipe->buf = NULL; @@ -350,13 +350,13 @@ static bool pipe_xfer_out(unsigned num) static void process_setup_packet(uint8_t rhport) { uint16_t setup_packet[4]; - if (0 == (LINK_REG->INTSTS0 & LINK_REG_INTSTS0_VALID_Msk)) return; - LINK_REG->CFIFOCTR = LINK_REG_CFIFOCTR_BCLR_Msk; - setup_packet[0] = tu_le16toh(LINK_REG->USBREQ); - setup_packet[1] = LINK_REG->USBVAL; - setup_packet[2] = LINK_REG->USBINDX; - setup_packet[3] = LINK_REG->USBLENG; - LINK_REG->INTSTS0 = ~((uint16_t)LINK_REG_INTSTS0_VALID_Msk); + if (0 == (RUSB2->INTSTS0 & RUSB2_INTSTS0_VALID_Msk)) return; + RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; + setup_packet[0] = tu_le16toh(RUSB2->USBREQ); + setup_packet[1] = RUSB2->USBVAL; + setup_packet[2] = RUSB2->USBINDX; + setup_packet[3] = RUSB2->USBLENG; + RUSB2->INTSTS0 = ~((uint16_t)RUSB2_INTSTS0_VALID_Msk); dcd_event_setup_received(rhport, (const uint8_t*)&setup_packet[0], true); } @@ -364,7 +364,7 @@ static void process_status_completion(uint8_t rhport) { uint8_t ep_addr; /* Check the data stage direction */ - if (LINK_REG->CFIFOSEL & LINK_REG_CFIFOSEL_ISEL_WRITE) { + if (RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) { /* IN transfer. */ ep_addr = tu_edpt_addr(0, TUSB_DIR_IN); } else { @@ -378,12 +378,12 @@ static bool process_pipe0_xfer(int buffer_type, uint8_t ep_addr, void* buffer, u { /* configure fifo direction and access unit settings */ if (ep_addr) { /* IN, 2 bytes */ - LINK_REG->CFIFOSEL = LINK_REG_CFIFOSEL_ISEL_WRITE | LINK_REG_FIFOSEL_MBW_16BIT | - (TU_BYTE_ORDER == TU_BIG_ENDIAN ? LINK_REG_FIFOSEL_BIGEND : 0); - while (!(LINK_REG->CFIFOSEL & LINK_REG_CFIFOSEL_ISEL_WRITE)) ; + RUSB2->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | + (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); + while (!(RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE)) ; } else { /* OUT, a byte */ - LINK_REG->CFIFOSEL = LINK_REG_FIFOSEL_MBW_8BIT; - while (LINK_REG->CFIFOSEL & LINK_REG_CFIFOSEL_ISEL_WRITE) ; + RUSB2->CFIFOSEL = RUSB2_FIFOSEL_MBW_8BIT; + while (RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) ; } pipe_state_t *pipe = &_dcd.pipe[0]; @@ -393,14 +393,14 @@ static bool process_pipe0_xfer(int buffer_type, uint8_t ep_addr, void* buffer, u if (total_bytes) { pipe->buf = buffer; if (ep_addr) { /* IN */ - TU_ASSERT(LINK_REG->DCPCTR_b.BSTS && (LINK_REG->USBREQ & 0x80)); + TU_ASSERT(RUSB2->DCPCTR_b.BSTS && (RUSB2->USBREQ & 0x80)); pipe0_xfer_in(); } - LINK_REG->DCPCTR = LINK_REG_PIPE_CTR_PID_BUF; + RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; } else { /* ZLP */ pipe->buf = NULL; - LINK_REG->DCPCTR = LINK_REG_DCPCTR_CCPL_Msk | LINK_REG_PIPE_CTR_PID_BUF; + RUSB2->DCPCTR = RUSB2_DCPCTR_CCPL_Msk | RUSB2_PIPE_CTR_PID_BUF; } return true; } @@ -422,11 +422,11 @@ static bool process_pipe_xfer(int buffer_type, uint8_t ep_addr, void* buffer, ui if (total_bytes) { pipe_xfer_in(num); } else { /* ZLP */ - LINK_REG->D0FIFOSEL = num; + RUSB2->D0FIFOSEL = num; pipe_wait_for_ready(num); - LINK_REG->D0FIFOCTR = LINK_REG_CFIFOCTR_BVAL_Msk; - LINK_REG->D0FIFOSEL = 0; - while (LINK_REG->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + RUSB2->D0FIFOSEL = 0; + while (RUSB2->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ } } else { #if defined(__CCRX__) @@ -437,11 +437,11 @@ static bool process_pipe_xfer(int buffer_type, uint8_t ep_addr, void* buffer, ui if (pt) { const unsigned mps = edpt_max_packet_size(num); volatile uint16_t *ctr = get_pipectr(num); - if (*ctr & 0x3) *ctr = LINK_REG_PIPE_CTR_PID_NAK; + if (*ctr & 0x3) *ctr = RUSB2_PIPE_CTR_PID_NAK; pt->TRE = TU_BIT(8); pt->TRN = (total_bytes + mps - 1) / mps; pt->TRENB = 1; - *ctr = LINK_REG_PIPE_CTR_PID_BUF; + *ctr = RUSB2_PIPE_CTR_PID_BUF; } } // TU_LOG1("X %x %d %d\r\n", ep_addr, total_bytes, buffer_type); @@ -493,28 +493,28 @@ static void process_pipe_brdy(uint8_t rhport, unsigned num) static void process_bus_reset(uint8_t rhport) { - LINK_REG->BEMPENB = 1; - LINK_REG->BRDYENB = 1; - LINK_REG->CFIFOCTR = LINK_REG_CFIFOCTR_BCLR_Msk; - LINK_REG->D0FIFOSEL = 0; - while (LINK_REG->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - LINK_REG->D1FIFOSEL = 0; - while (LINK_REG->D1FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - volatile uint16_t *ctr = (volatile uint16_t*)((uintptr_t) (&LINK_REG->PIPE_CTR[0])); - volatile uint16_t *tre = (volatile uint16_t*)((uintptr_t) (&LINK_REG->PIPE_TR[0].E)); + RUSB2->BEMPENB = 1; + RUSB2->BRDYENB = 1; + RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; + RUSB2->D0FIFOSEL = 0; + while (RUSB2->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + RUSB2->D1FIFOSEL = 0; + while (RUSB2->D1FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + volatile uint16_t *ctr = (volatile uint16_t*)((uintptr_t) (&RUSB2->PIPE_CTR[0])); + volatile uint16_t *tre = (volatile uint16_t*)((uintptr_t) (&RUSB2->PIPE_TR[0].E)); for (int i = 1; i <= 5; ++i) { - LINK_REG->PIPESEL = i; - LINK_REG->PIPECFG = 0; - *ctr = LINK_REG_PIPE_CTR_ACLRM_Msk; + RUSB2->PIPESEL = i; + RUSB2->PIPECFG = 0; + *ctr = RUSB2_PIPE_CTR_ACLRM_Msk; *ctr = 0; ++ctr; *tre = TU_BIT(8); tre += 2; } for (int i = 6; i <= 9; ++i) { - LINK_REG->PIPESEL = i; - LINK_REG->PIPECFG = 0; - *ctr = LINK_REG_PIPE_CTR_ACLRM_Msk; + RUSB2->PIPESEL = i; + RUSB2->PIPECFG = 0; + *ctr = RUSB2_PIPE_CTR_ACLRM_Msk; *ctr = 0; ++ctr; } @@ -524,7 +524,7 @@ static void process_bus_reset(uint8_t rhport) static void process_set_address(uint8_t rhport) { - const uint32_t addr = LINK_REG->USBADDR_b.USBADDR; + const uint32_t addr = RUSB2->USBADDR_b.USBADDR; if (!addr) return; const tusb_control_request_t setup_packet = { #if defined(__CCRX__) @@ -580,39 +580,39 @@ void dcd_init(uint8_t rhport) enable_interrupt(pswi); #endif - LINK_REG->SYSCFG_b.SCKE = 1; - while (!LINK_REG->SYSCFG_b.SCKE) ; - LINK_REG->SYSCFG_b.DRPD = 0; - LINK_REG->SYSCFG_b.DCFM = 0; - LINK_REG->SYSCFG_b.USBE = 1; + RUSB2->SYSCFG_b.SCKE = 1; + while (!RUSB2->SYSCFG_b.SCKE) ; + RUSB2->SYSCFG_b.DRPD = 0; + RUSB2->SYSCFG_b.DCFM = 0; + RUSB2->SYSCFG_b.USBE = 1; // MCU specific PHY init - link_phy_init(); + rusb2_phy_init(); - LINK_REG->PHYSLEW = 0x5; - LINK_REG->DPUSR0R_FS_b.FIXPHY0 = 0u; /* USB_BASE Transceiver Output fixed */ + RUSB2->PHYSLEW = 0x5; + RUSB2->DPUSR0R_FS_b.FIXPHY0 = 0u; /* USB_BASE Transceiver Output fixed */ /* Setup default control pipe */ - LINK_REG->DCPMAXP_b.MXPS = 64; - LINK_REG->INTENB0 = LINK_REG_INTSTS0_VBINT_Msk | LINK_REG_INTSTS0_BRDY_Msk | LINK_REG_INTSTS0_BEMP_Msk | - LINK_REG_INTSTS0_DVST_Msk | LINK_REG_INTSTS0_CTRT_Msk | (USE_SOF ? LINK_REG_INTSTS0_SOFR_Msk : 0) | - LINK_REG_INTSTS0_RESM_Msk; - LINK_REG->BEMPENB = 1; - LINK_REG->BRDYENB = 1; - - if (LINK_REG->INTSTS0_b.VBSTS) { + RUSB2->DCPMAXP_b.MXPS = 64; + RUSB2->INTENB0 = RUSB2_INTSTS0_VBINT_Msk | RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_BEMP_Msk | + RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_CTRT_Msk | (USE_SOF ? RUSB2_INTSTS0_SOFR_Msk : 0) | + RUSB2_INTSTS0_RESM_Msk; + RUSB2->BEMPENB = 1; + RUSB2->BRDYENB = 1; + + if (RUSB2->INTSTS0_b.VBSTS) { dcd_connect(rhport); } } void dcd_int_enable(uint8_t rhport) { - link_int_enable(rhport); + rusb2_int_enable(rhport); } void dcd_int_disable(uint8_t rhport) { - link_int_disable(rhport); + rusb2_int_disable(rhport); } void dcd_set_address(uint8_t rhport, uint8_t dev_addr) @@ -624,19 +624,19 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) void dcd_remote_wakeup(uint8_t rhport) { (void)rhport; - LINK_REG->DVSTCTR0_b.WKUP = 1; + RUSB2->DVSTCTR0_b.WKUP = 1; } void dcd_connect(uint8_t rhport) { (void)rhport; - LINK_REG->SYSCFG_b.DPRPU = 1; + RUSB2->SYSCFG_b.DPRPU = 1; } void dcd_disconnect(uint8_t rhport) { (void)rhport; - LINK_REG->SYSCFG_b.DPRPU = 0; + RUSB2->SYSCFG_b.DPRPU = 0; } void dcd_sof_enable(uint8_t rhport, bool en) @@ -672,26 +672,26 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) /* setup pipe */ dcd_int_disable(rhport); - LINK_REG->PIPESEL = num; - LINK_REG->PIPEMAXP = mps; + RUSB2->PIPESEL = num; + RUSB2->PIPEMAXP = mps; volatile uint16_t *ctr = get_pipectr(num); - *ctr = LINK_REG_PIPE_CTR_ACLRM_Msk | LINK_REG_PIPE_CTR_SQCLR_Msk; + *ctr = RUSB2_PIPE_CTR_ACLRM_Msk | RUSB2_PIPE_CTR_SQCLR_Msk; *ctr = 0; unsigned cfg = (dir << 4) | epn; if (xfer == TUSB_XFER_BULK) { - cfg |= (LINK_REG_PIPECFG_TYPE_BULK | LINK_REG_PIPECFG_SHTNAK_Msk | LINK_REG_PIPECFG_DBLB_Msk); + cfg |= (RUSB2_PIPECFG_TYPE_BULK | RUSB2_PIPECFG_SHTNAK_Msk | RUSB2_PIPECFG_DBLB_Msk); } else if (xfer == TUSB_XFER_INTERRUPT) { - cfg |= LINK_REG_PIPECFG_TYPE_INT; + cfg |= RUSB2_PIPECFG_TYPE_INT; } else { - cfg |= (LINK_REG_PIPECFG_TYPE_ISO | LINK_REG_PIPECFG_DBLB_Msk); + cfg |= (RUSB2_PIPECFG_TYPE_ISO | RUSB2_PIPECFG_DBLB_Msk); } - LINK_REG->PIPECFG = cfg; - LINK_REG->BRDYSTS = 0x1FFu ^ TU_BIT(num); - LINK_REG->BRDYENB |= TU_BIT(num); + RUSB2->PIPECFG = cfg; + RUSB2->BRDYSTS = 0x1FFu ^ TU_BIT(num); + RUSB2->BRDYENB |= TU_BIT(num); if (dir || (xfer != TUSB_XFER_BULK)) { - *ctr = LINK_REG_PIPE_CTR_PID_BUF; + *ctr = RUSB2_PIPE_CTR_PID_BUF; } - // TU_LOG1("O %d %x %x\r\n", LINK_REG->PIPESEL, LINK_REG->PIPECFG, LINK_REG->PIPEMAXP); + // TU_LOG1("O %d %x %x\r\n", RUSB2->PIPESEL, RUSB2->PIPECFG, RUSB2->PIPEMAXP); dcd_int_enable(rhport); return true; @@ -716,11 +716,11 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) const unsigned dir = tu_edpt_dir(ep_addr); const unsigned num = _dcd.ep[dir][epn]; - LINK_REG->BRDYENB &= ~TU_BIT(num); + RUSB2->BRDYENB &= ~TU_BIT(num); volatile uint16_t *ctr = get_pipectr(num); *ctr = 0; - LINK_REG->PIPESEL = num; - LINK_REG->PIPECFG = 0; + RUSB2->PIPESEL = num; + RUSB2->PIPECFG = 0; _dcd.pipe[num].ep = 0; _dcd.ep[dir][epn] = 0; } @@ -751,8 +751,8 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) if (!ctr) return; dcd_int_disable(rhport); const uint32_t pid = *ctr & 0x3; - *ctr = pid | LINK_REG_PIPE_CTR_PID_STALL; - *ctr = LINK_REG_PIPE_CTR_PID_STALL; + *ctr = pid | RUSB2_PIPE_CTR_PID_STALL; + *ctr = RUSB2_PIPE_CTR_PID_STALL; dcd_int_enable(rhport); } @@ -761,15 +761,15 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr); if (!ctr) return; dcd_int_disable(rhport); - *ctr = LINK_REG_PIPE_CTR_SQCLR_Msk; + *ctr = RUSB2_PIPE_CTR_SQCLR_Msk; if (tu_edpt_dir(ep_addr)) { /* IN */ - *ctr = LINK_REG_PIPE_CTR_PID_BUF; + *ctr = RUSB2_PIPE_CTR_PID_BUF; } else { const unsigned num = _dcd.ep[0][tu_edpt_number(ep_addr)]; - LINK_REG->PIPESEL = num; - if (LINK_REG->PIPECFG_b.TYPE != 1) { - *ctr = LINK_REG_PIPE_CTR_PID_BUF; + RUSB2->PIPESEL = num; + if (RUSB2->PIPECFG_b.TYPE != 1) { + *ctr = RUSB2_PIPE_CTR_PID_BUF; } } dcd_int_enable(rhport); @@ -782,71 +782,71 @@ void dcd_int_handler(uint8_t rhport) { (void)rhport; - unsigned is0 = LINK_REG->INTSTS0; + unsigned is0 = RUSB2->INTSTS0; /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ - LINK_REG->INTSTS0 = ~((LINK_REG_INTSTS0_CTRT_Msk | LINK_REG_INTSTS0_DVST_Msk | LINK_REG_INTSTS0_SOFR_Msk | - LINK_REG_INTSTS0_RESM_Msk | LINK_REG_INTSTS0_VBINT_Msk) & is0) | LINK_REG_INTSTS0_VALID_Msk; - if (is0 & LINK_REG_INTSTS0_VBINT_Msk) { - if (LINK_REG->INTSTS0_b.VBSTS) { + RUSB2->INTSTS0 = ~((RUSB2_INTSTS0_CTRT_Msk | RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_SOFR_Msk | + RUSB2_INTSTS0_RESM_Msk | RUSB2_INTSTS0_VBINT_Msk) & is0) | RUSB2_INTSTS0_VALID_Msk; + if (is0 & RUSB2_INTSTS0_VBINT_Msk) { + if (RUSB2->INTSTS0_b.VBSTS) { dcd_connect(rhport); } else { dcd_disconnect(rhport); } } - if (is0 & LINK_REG_INTSTS0_RESM_Msk) { + if (is0 & RUSB2_INTSTS0_RESM_Msk) { dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); #if (0==USE_SOF) - LINK_REG->INTENB0_b.SOFE = 0; + RUSB2->INTENB0_b.SOFE = 0; #endif } - if ((is0 & LINK_REG_INTSTS0_SOFR_Msk) && LINK_REG->INTENB0_b.SOFE) { + if ((is0 & RUSB2_INTSTS0_SOFR_Msk) && RUSB2->INTENB0_b.SOFE) { // USBD will exit suspended mode when SOF event is received dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); #if (0 == USE_SOF) - LINK_REG->INTENB0_b.SOFE = 0; + RUSB2->INTENB0_b.SOFE = 0; #endif } - if (is0 & LINK_REG_INTSTS0_DVST_Msk) { - switch (is0 & LINK_REG_INTSTS0_DVSQ_Msk) { - case LINK_REG_INTSTS0_DVSQ_STATE_DEF: + if (is0 & RUSB2_INTSTS0_DVST_Msk) { + switch (is0 & RUSB2_INTSTS0_DVSQ_Msk) { + case RUSB2_INTSTS0_DVSQ_STATE_DEF: process_bus_reset(rhport); break; - case LINK_REG_INTSTS0_DVSQ_STATE_ADDR: + case RUSB2_INTSTS0_DVSQ_STATE_ADDR: process_set_address(rhport); break; - case LINK_REG_INTSTS0_DVSQ_STATE_SUSP0: - case LINK_REG_INTSTS0_DVSQ_STATE_SUSP1: - case LINK_REG_INTSTS0_DVSQ_STATE_SUSP2: - case LINK_REG_INTSTS0_DVSQ_STATE_SUSP3: + case RUSB2_INTSTS0_DVSQ_STATE_SUSP0: + case RUSB2_INTSTS0_DVSQ_STATE_SUSP1: + case RUSB2_INTSTS0_DVSQ_STATE_SUSP2: + case RUSB2_INTSTS0_DVSQ_STATE_SUSP3: dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); #if (0==USE_SOF) - LINK_REG->INTENB0_b.SOFE = 1; + RUSB2->INTENB0_b.SOFE = 1; #endif default: break; } } - if (is0 & LINK_REG_INTSTS0_CTRT_Msk) { - if (is0 & LINK_REG_INTSTS0_CTSQ_CTRL_RDATA) { + if (is0 & RUSB2_INTSTS0_CTRT_Msk) { + if (is0 & RUSB2_INTSTS0_CTSQ_CTRL_RDATA) { /* A setup packet has been received. */ process_setup_packet(rhport); - } else if (0 == (is0 & LINK_REG_INTSTS0_CTSQ_Msk)) { + } else if (0 == (is0 & RUSB2_INTSTS0_CTSQ_Msk)) { /* A ZLP has been sent/received. */ process_status_completion(rhport); } } - if (is0 & LINK_REG_INTSTS0_BEMP_Msk) { - const unsigned s = LINK_REG->BEMPSTS; - LINK_REG->BEMPSTS = 0; + if (is0 & RUSB2_INTSTS0_BEMP_Msk) { + const unsigned s = RUSB2->BEMPSTS; + RUSB2->BEMPSTS = 0; if (s & 1) { process_pipe0_bemp(rhport); } } - if (is0 & LINK_REG_INTSTS0_BRDY_Msk) { - const unsigned m = LINK_REG->BRDYENB; - unsigned s = LINK_REG->BRDYSTS & m; + if (is0 & RUSB2_INTSTS0_BRDY_Msk) { + const unsigned m = RUSB2->BRDYENB; + unsigned s = RUSB2->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ - LINK_REG->BRDYSTS = ~s; + RUSB2->BRDYSTS = ~s; while (s) { #if defined(__CCRX__) static const int Mod37BitPosition[] = { diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 7d14aad60..e4743223e 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -47,9 +47,9 @@ /* LINK core registers */ #if defined(__CCRX__) -#define LINK_REG ((LINK_REG_t __evenaccess*)LINK_REG_BASE) + #define RUSB2 ((RUSB2_REG_t __evenaccess*) RUSB2_REG_BASE) #else -#define LINK_REG ((LINK_REG_t*)LINK_REG_BASE) + #define RUSB2 ((RUSB2_REG_t*) RUSB2_REG_BASE) #endif TU_ATTR_PACKED_BEGIN @@ -135,9 +135,9 @@ static unsigned find_pipe(unsigned xfer) static volatile uint16_t* get_pipectr(unsigned num) { if (num) { - return (volatile uint16_t*)&(LINK_REG->PIPE_CTR[num - 1]); + return (volatile uint16_t*)&(RUSB2->PIPE_CTR[num - 1]); } else { - return (volatile uint16_t*)&(LINK_REG->DCPCTR); + return (volatile uint16_t*)&(RUSB2->DCPCTR); } } @@ -145,7 +145,7 @@ static volatile reg_pipetre_t* get_pipetre(unsigned num) { volatile reg_pipetre_t* tre = NULL; if ((1 <= num) && (num <= 5)) { - tre = (volatile reg_pipetre_t*)&(LINK_REG->PIPE_TR[num - 1].E); + tre = (volatile reg_pipetre_t*)&(RUSB2->PIPE_TR[num - 1].E); } return tre; } @@ -164,19 +164,19 @@ static volatile uint16_t* addr_to_pipectr(uint8_t dev_addr, unsigned ep_addr) static unsigned edpt0_max_packet_size(void) { - return LINK_REG->DCPMAXP_b.MXPS; + return RUSB2->DCPMAXP_b.MXPS; } static unsigned edpt_max_packet_size(unsigned num) { - LINK_REG->PIPESEL = num; - return LINK_REG->PIPEMAXP_b.MXPS; + RUSB2->PIPESEL = num; + return RUSB2->PIPEMAXP_b.MXPS; } static inline void pipe_wait_for_ready(unsigned num) { - while (LINK_REG->D0FIFOSEL_b.CURPIPE != num) ; - while (!LINK_REG->D0FIFOCTR_b.FRDY) ; + while (RUSB2->D0FIFOSEL_b.CURPIPE != num) ; + while (!RUSB2->D0FIFOCTR_b.FRDY) ; } static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) @@ -207,23 +207,23 @@ static bool pipe0_xfer_in(void) const unsigned rem = pipe->remaining; const unsigned mps = edpt0_max_packet_size(); - const unsigned vld = LINK_REG->CFIFOCTR_b.DTLN; + const unsigned vld = RUSB2->CFIFOCTR_b.DTLN; const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); void *buf = pipe->buf; if (len) { - LINK_REG->DCPCTR = LINK_REG_PIPE_CTR_PID_NAK; - pipe_read_packet(buf, (volatile void*)&LINK_REG->CFIFO, len); + RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; + pipe_read_packet(buf, (volatile void*)&RUSB2->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { - LINK_REG->CFIFOCTR = LINK_REG_CFIFOCTR_BCLR_Msk; + RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; } pipe->remaining = rem - len; if ((len < mps) || (rem == len)) { pipe->buf = NULL; return true; } - LINK_REG->DCPCTR = LINK_REG_PIPE_CTR_PID_BUF; + RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; return false; } @@ -239,11 +239,11 @@ static bool pipe0_xfer_out(void) const unsigned len = TU_MIN(mps, rem); void *buf = pipe->buf; if (len) { - pipe_write_packet(buf, (volatile void*)&LINK_REG->CFIFO, len); + pipe_write_packet(buf, (volatile void*)&RUSB2->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { - LINK_REG->CFIFOCTR = LINK_REG_CFIFOCTR_BVAL_Msk; + RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; } pipe->remaining = rem - len; return false; @@ -254,21 +254,21 @@ static bool pipe_xfer_in(unsigned num) pipe_state_t *pipe = &_hcd.pipe[num]; const unsigned rem = pipe->remaining; - LINK_REG->D0FIFOSEL = num | LINK_REG_FIFOSEL_MBW_8BIT; + RUSB2->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_8BIT; const unsigned mps = edpt_max_packet_size(num); pipe_wait_for_ready(num); - const unsigned vld = LINK_REG->D0FIFOCTR_b.DTLN; + const unsigned vld = RUSB2->D0FIFOCTR_b.DTLN; const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); void *buf = pipe->buf; if (len) { - pipe_read_packet(buf, (volatile void*)&LINK_REG->D0FIFO, len); + pipe_read_packet(buf, (volatile void*)&RUSB2->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { - LINK_REG->D0FIFOCTR = LINK_REG_CFIFOCTR_BCLR_Msk; + RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; } - LINK_REG->D0FIFOSEL = 0; - while (LINK_REG->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + RUSB2->D0FIFOSEL = 0; + while (RUSB2->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ pipe->remaining = rem - len; if ((len < mps) || (rem == len)) { pipe->buf = NULL; @@ -287,19 +287,19 @@ static bool pipe_xfer_out(unsigned num) return true; } - LINK_REG->D0FIFOSEL = num | LINK_REG_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? LINK_REG_FIFOSEL_BIGEND : 0); + RUSB2->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); const unsigned mps = edpt_max_packet_size(num); pipe_wait_for_ready(num); const unsigned len = TU_MIN(rem, mps); void *buf = pipe->buf; if (len) { - pipe_write_packet(buf, (volatile void*)&LINK_REG->D0FIFO, len); + pipe_write_packet(buf, (volatile void*)&RUSB2->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } if (len < mps) - LINK_REG->D0FIFOCTR = LINK_REG_CFIFOCTR_BVAL_Msk; - LINK_REG->D0FIFOSEL = 0; - while (LINK_REG->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + RUSB2->D0FIFOSEL = 0; + while (RUSB2->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ pipe->remaining = rem - len; return false; } @@ -311,12 +311,12 @@ static bool process_pipe0_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, /* configure fifo direction and access unit settings */ if (dir_in) { /* IN, a byte */ - LINK_REG->CFIFOSEL = LINK_REG_FIFOSEL_MBW_8BIT; - while (LINK_REG->CFIFOSEL & LINK_REG_CFIFOSEL_ISEL_WRITE) ; + RUSB2->CFIFOSEL = RUSB2_FIFOSEL_MBW_8BIT; + while (RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) ; } else { /* OUT, 2 bytes */ - LINK_REG->CFIFOSEL = LINK_REG_CFIFOSEL_ISEL_WRITE | LINK_REG_FIFOSEL_MBW_16BIT | - (TU_BYTE_ORDER == TU_BIG_ENDIAN ? LINK_REG_FIFOSEL_BIGEND : 0); - while (!(LINK_REG->CFIFOSEL & LINK_REG_CFIFOSEL_ISEL_WRITE)) ; + RUSB2->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | + (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); + while (!(RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE)) ; } pipe_state_t *pipe = &_hcd.pipe[0]; @@ -326,21 +326,21 @@ static bool process_pipe0_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, if (buflen) { pipe->buf = buffer; if (!dir_in) { /* OUT */ - TU_ASSERT(LINK_REG->DCPCTR_b.BSTS && (LINK_REG->USBREQ & 0x80)); + TU_ASSERT(RUSB2->DCPCTR_b.BSTS && (RUSB2->USBREQ & 0x80)); pipe0_xfer_out(); } } else { /* ZLP */ pipe->buf = NULL; if (!dir_in) { /* OUT */ - LINK_REG->CFIFOCTR = LINK_REG_CFIFOCTR_BVAL_Msk; + RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; } - if (dir_in == LINK_REG->DCPCFG_b.DIR) { - TU_ASSERT(LINK_REG_PIPE_CTR_PID_NAK == LINK_REG->DCPCTR_b.PID); - LINK_REG->DCPCTR_b.SQSET = 1; - LINK_REG->DCPCFG_b.DIR = dir_in ^ 1; + if (dir_in == RUSB2->DCPCFG_b.DIR) { + TU_ASSERT(RUSB2_PIPE_CTR_PID_NAK == RUSB2->DCPCTR_b.PID); + RUSB2->DCPCTR_b.SQSET = 1; + RUSB2->DCPCFG_b.DIR = dir_in ^ 1; } } - LINK_REG->DCPCTR = LINK_REG_PIPE_CTR_PID_BUF; + RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; return true; } @@ -360,23 +360,23 @@ static bool process_pipe_xfer(uint8_t dev_addr, uint8_t ep_addr, void *buffer, u if (buflen) { pipe_xfer_out(num); } else { /* ZLP */ - LINK_REG->D0FIFOSEL = num; + RUSB2->D0FIFOSEL = num; pipe_wait_for_ready(num); - LINK_REG->D0FIFOCTR = LINK_REG_CFIFOCTR_BVAL_Msk; - LINK_REG->D0FIFOSEL = 0; - while (LINK_REG->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + RUSB2->D0FIFOSEL = 0; + while (RUSB2->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ } } else { volatile uint16_t *ctr = get_pipectr(num); volatile reg_pipetre_t *pt = get_pipetre(num); if (pt) { const unsigned mps = edpt_max_packet_size(num); - if (*ctr & 0x3) *ctr = LINK_REG_PIPE_CTR_PID_NAK; + if (*ctr & 0x3) *ctr = RUSB2_PIPE_CTR_PID_NAK; pt->TRE = TU_BIT(8); pt->TRN = (buflen + mps - 1) / mps; pt->TRENB = 1; } - *ctr = LINK_REG_PIPE_CTR_PID_BUF; + *ctr = RUSB2_PIPE_CTR_PID_BUF; } return true; } @@ -410,10 +410,10 @@ static void process_pipe_nrdy(uint8_t rhport, unsigned num) unsigned result; uint16_t volatile *ctr = get_pipectr(num); // TU_LOG1("NRDY %d %x\n", num, *ctr); - switch (*ctr & LINK_REG_PIPE_CTR_PID_Msk) { + switch (*ctr & RUSB2_PIPE_CTR_PID_Msk) { default: return; - case LINK_REG_PIPE_CTR_PID_STALL: result = XFER_RESULT_STALLED; break; - case LINK_REG_PIPE_CTR_PID_NAK: result = XFER_RESULT_FAILED; break; + case RUSB2_PIPE_CTR_PID_STALL: result = XFER_RESULT_STALLED; break; + case RUSB2_PIPE_CTR_PID_NAK: result = XFER_RESULT_FAILED; break; } pipe_state_t *pipe = &_hcd.pipe[num]; hcd_event_xfer_complete(pipe->dev, pipe->ep, @@ -485,44 +485,44 @@ bool hcd_init(uint8_t rhport) enable_interrupt(pswi); #endif - LINK_REG->SYSCFG_b.SCKE = 1; - while (!LINK_REG->SYSCFG_b.SCKE) ; - LINK_REG->SYSCFG_b.DPRPU = 0; - LINK_REG->SYSCFG_b.DRPD = 0; - LINK_REG->SYSCFG_b.DCFM = 1; + RUSB2->SYSCFG_b.SCKE = 1; + while (!RUSB2->SYSCFG_b.SCKE) ; + RUSB2->SYSCFG_b.DPRPU = 0; + RUSB2->SYSCFG_b.DRPD = 0; + RUSB2->SYSCFG_b.DCFM = 1; - LINK_REG->DVSTCTR0_b.VBUSEN = 1; + RUSB2->DVSTCTR0_b.VBUSEN = 1; - LINK_REG->SYSCFG_b.DRPD = 1; + RUSB2->SYSCFG_b.DRPD = 1; for (volatile int i = 0; i < 30000; ++i) ; - LINK_REG->SYSCFG_b.USBE = 1; + RUSB2->SYSCFG_b.USBE = 1; // MCU specific PHY init - link_phy_init(); + rusb2_phy_init(); - LINK_REG->PHYSLEW = 0x5; - LINK_REG->DPUSR0R_FS_b.FIXPHY0 = 0u; /* Transceiver Output fixed */ + RUSB2->PHYSLEW = 0x5; + RUSB2->DPUSR0R_FS_b.FIXPHY0 = 0u; /* Transceiver Output fixed */ /* Setup default control pipe */ - LINK_REG->DCPCFG = LINK_REG_PIPECFG_SHTNAK_Msk; - LINK_REG->DCPMAXP = 64; - LINK_REG->INTENB0 = LINK_REG_INTSTS0_BRDY_Msk | LINK_REG_INTSTS0_NRDY_Msk | LINK_REG_INTSTS0_BEMP_Msk; - LINK_REG->INTENB1 = LINK_REG_INTSTS1_SACK_Msk | LINK_REG_INTSTS1_SIGN_Msk | LINK_REG_INTSTS1_ATTCH_Msk | LINK_REG_INTSTS1_DTCH_Msk; - LINK_REG->BEMPENB = 1; - LINK_REG->NRDYENB = 1; - LINK_REG->BRDYENB = 1; + RUSB2->DCPCFG = RUSB2_PIPECFG_SHTNAK_Msk; + RUSB2->DCPMAXP = 64; + RUSB2->INTENB0 = RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_NRDY_Msk | RUSB2_INTSTS0_BEMP_Msk; + RUSB2->INTENB1 = RUSB2_INTSTS1_SACK_Msk | RUSB2_INTSTS1_SIGN_Msk | RUSB2_INTSTS1_ATTCH_Msk | RUSB2_INTSTS1_DTCH_Msk; + RUSB2->BEMPENB = 1; + RUSB2->NRDYENB = 1; + RUSB2->BRDYENB = 1; return true; } void hcd_int_enable(uint8_t rhport) { - link_int_enable(rhport); + rusb2_int_enable(rhport); } void hcd_int_disable(uint8_t rhport) { - link_int_disable(rhport); + rusb2_int_disable(rhport); } uint32_t hcd_frame_number(uint8_t rhport) @@ -531,7 +531,7 @@ uint32_t hcd_frame_number(uint8_t rhport) /* The device must be reset at least once after connection * in order to start the frame counter. */ if (_hcd.need_reset) hcd_port_reset(rhport); - return LINK_REG->FRMNUM_b.FRNM; + return RUSB2->FRMNUM_b.FRNM; } /*--------------------------------------------------------------------+ @@ -540,24 +540,24 @@ uint32_t hcd_frame_number(uint8_t rhport) bool hcd_port_connect_status(uint8_t rhport) { (void)rhport; - return LINK_REG->INTSTS1_b.ATTCH ? true : false; + return RUSB2->INTSTS1_b.ATTCH ? true : false; } void hcd_port_reset(uint8_t rhport) { - LINK_REG->DCPCTR = LINK_REG_PIPE_CTR_PID_NAK; - while (LINK_REG->DCPCTR_b.PBUSY) ; + RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; + while (RUSB2->DCPCTR_b.PBUSY) ; hcd_int_disable(rhport); - LINK_REG->DVSTCTR0_b.UACT = 0; - if (LINK_REG->DCPCTR_b.SUREQ) { - LINK_REG->DCPCTR_b.SUREQCLR = 1; + RUSB2->DVSTCTR0_b.UACT = 0; + if (RUSB2->DCPCTR_b.SUREQ) { + RUSB2->DCPCTR_b.SUREQCLR = 1; } hcd_int_enable(rhport); /* Reset should be asserted 10-20ms. */ - LINK_REG->DVSTCTR0_b.USBRST = 1; + RUSB2->DVSTCTR0_b.USBRST = 1; for (volatile int i = 0; i < 2400000; ++i) ; - LINK_REG->DVSTCTR0_b.USBRST = 0; - LINK_REG->DVSTCTR0_b.UACT = 1; + RUSB2->DVSTCTR0_b.USBRST = 0; + RUSB2->DVSTCTR0_b.UACT = 1; _hcd.need_reset = false; } @@ -569,10 +569,10 @@ void hcd_port_reset_end(uint8_t rhport) tusb_speed_t hcd_port_speed_get(uint8_t rhport) { (void)rhport; - switch (LINK_REG->DVSTCTR0_b.RHST) { + switch (RUSB2->DVSTCTR0_b.RHST) { default: return TUSB_SPEED_INVALID; - case LINK_REG_DVSTCTR0_RHST_FS: return TUSB_SPEED_FULL; - case LINK_REG_DVSTCTR0_RHST_LS: return TUSB_SPEED_LOW; + case RUSB2_DVSTCTR0_RHST_FS: return TUSB_SPEED_FULL; + case RUSB2_DVSTCTR0_RHST_LS: return TUSB_SPEED_LOW; } } @@ -588,13 +588,13 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) unsigned num = *ep; if (!num || dev_addr != _hcd.pipe[num].dev) continue; - ctr = (uint16_t volatile*)&LINK_REG->PIPE_CTR[num - 1]; + ctr = (uint16_t volatile*)&RUSB2->PIPE_CTR[num - 1]; *ctr = 0; - LINK_REG->NRDYENB &= ~TU_BIT(num); - LINK_REG->BRDYENB &= ~TU_BIT(num); - LINK_REG->PIPESEL = num; - LINK_REG->PIPECFG = 0; - LINK_REG->PIPEMAXP = 0; + RUSB2->NRDYENB &= ~TU_BIT(num); + RUSB2->BRDYENB &= ~TU_BIT(num); + RUSB2->PIPESEL = num; + RUSB2->PIPECFG = 0; + RUSB2->PIPEMAXP = 0; _hcd.pipe[num].ep = 0; _hcd.pipe[num].dev = 0; @@ -608,32 +608,32 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { (void)rhport; - // TU_LOG1("S %d %x\n", dev_addr, LINK_REG->DCPCTR); + // TU_LOG1("S %d %x\n", dev_addr, RUSB2->DCPCTR); TU_ASSERT(dev_addr < 6); /* USBa can only handle addresses from 0 to 5. */ - TU_ASSERT(0 == LINK_REG->DCPCTR_b.SUREQ); + TU_ASSERT(0 == RUSB2->DCPCTR_b.SUREQ); - LINK_REG->DCPCTR = LINK_REG_PIPE_CTR_PID_NAK; + RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; _hcd.pipe[0].buf = NULL; _hcd.pipe[0].length = 8; _hcd.pipe[0].remaining = 0; _hcd.pipe[0].dev = dev_addr; - while (LINK_REG->DCPCTR_b.PBUSY) ; - LINK_REG->DCPMAXP = (dev_addr << 12) | _hcd.ctl_mps[dev_addr]; + while (RUSB2->DCPCTR_b.PBUSY) ; + RUSB2->DCPMAXP = (dev_addr << 12) | _hcd.ctl_mps[dev_addr]; /* Set direction in advance for DATA stage */ uint8_t const bmRequesttype = setup_packet[0]; - LINK_REG->DCPCFG_b.DIR = tu_edpt_dir(bmRequesttype) ? 0: 1; + RUSB2->DCPCFG_b.DIR = tu_edpt_dir(bmRequesttype) ? 0: 1; uint16_t const* p = (uint16_t const*)(uintptr_t)&setup_packet[0]; - LINK_REG->USBREQ = tu_htole16(p[0]); - LINK_REG->USBVAL = p[1]; - LINK_REG->USBINDX = p[2]; - LINK_REG->USBLENG = p[3]; + RUSB2->USBREQ = tu_htole16(p[0]); + RUSB2->USBVAL = p[1]; + RUSB2->USBINDX = p[2]; + RUSB2->USBLENG = p[3]; - LINK_REG->DCPCTR_b.SUREQ = 1; + RUSB2->DCPCTR_b.SUREQ = 1; return true; } @@ -646,14 +646,14 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const const unsigned epn = tu_edpt_number(ep_addr); const unsigned mps = tu_edpt_packet_size(ep_desc); if (0 == epn) { - LINK_REG->DCPCTR = LINK_REG_PIPE_CTR_PID_NAK; + RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; hcd_devtree_info_t devtree; hcd_devtree_get_info(dev_addr, &devtree); - uint16_t volatile *devadd = (uint16_t volatile *)(uintptr_t) &LINK_REG->DEVADD[0]; + uint16_t volatile *devadd = (uint16_t volatile *)(uintptr_t) &RUSB2->DEVADD[0]; devadd += dev_addr; - while (LINK_REG->DCPCTR_b.PBUSY) ; - LINK_REG->DCPMAXP = (dev_addr << 12) | mps; - *devadd = (TUSB_SPEED_FULL == devtree.speed) ? LINK_REG_DEVADD_USBSPD_FS : LINK_REG_DEVADD_USBSPD_LS; + while (RUSB2->DCPCTR_b.PBUSY) ; + RUSB2->DCPMAXP = (dev_addr << 12) | mps; + *devadd = (TUSB_SPEED_FULL == devtree.speed) ? RUSB2_DEVADD_USBSPD_FS : RUSB2_DEVADD_USBSPD_LS; _hcd.ctl_mps[dev_addr] = mps; return true; } @@ -672,25 +672,25 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const /* setup pipe */ hcd_int_disable(rhport); - LINK_REG->PIPESEL = num; - LINK_REG->PIPEMAXP = (dev_addr << 12) | mps; + RUSB2->PIPESEL = num; + RUSB2->PIPEMAXP = (dev_addr << 12) | mps; volatile uint16_t *ctr = get_pipectr(num); - *ctr = LINK_REG_PIPE_CTR_ACLRM_Msk | LINK_REG_PIPE_CTR_SQCLR_Msk; + *ctr = RUSB2_PIPE_CTR_ACLRM_Msk | RUSB2_PIPE_CTR_SQCLR_Msk; *ctr = 0; unsigned cfg = ((1 ^ dir_in) << 4) | epn; if (xfer == TUSB_XFER_BULK) { - cfg |= LINK_REG_PIPECFG_TYPE_BULK | LINK_REG_PIPECFG_SHTNAK_Msk | LINK_REG_PIPECFG_DBLB_Msk; + cfg |= RUSB2_PIPECFG_TYPE_BULK | RUSB2_PIPECFG_SHTNAK_Msk | RUSB2_PIPECFG_DBLB_Msk; } else if (xfer == TUSB_XFER_INTERRUPT) { - cfg |= LINK_REG_PIPECFG_TYPE_INT; + cfg |= RUSB2_PIPECFG_TYPE_INT; } else { - cfg |= LINK_REG_PIPECFG_TYPE_ISO | LINK_REG_PIPECFG_DBLB_Msk; + cfg |= RUSB2_PIPECFG_TYPE_ISO | RUSB2_PIPECFG_DBLB_Msk; } - LINK_REG->PIPECFG = cfg; - LINK_REG->BRDYSTS = 0x1FFu ^ TU_BIT(num); - LINK_REG->NRDYENB |= TU_BIT(num); - LINK_REG->BRDYENB |= TU_BIT(num); + RUSB2->PIPECFG = cfg; + RUSB2->BRDYSTS = 0x1FFu ^ TU_BIT(num); + RUSB2->NRDYENB |= TU_BIT(num); + RUSB2->BRDYENB |= TU_BIT(num); if (!dir_in) { - *ctr = LINK_REG_PIPE_CTR_PID_BUF; + *ctr = RUSB2_PIPE_CTR_PID_BUF; } hcd_int_enable(rhport); @@ -717,12 +717,12 @@ bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) *ctr = pid & 2; *ctr = 0; } - *ctr = LINK_REG_PIPE_CTR_SQCLR_Msk; + *ctr = RUSB2_PIPE_CTR_SQCLR_Msk; unsigned const epn = tu_edpt_number(ep_addr); if (!epn) return true; if (!tu_edpt_dir(ep_addr)) { /* OUT */ - *ctr = LINK_REG_PIPE_CTR_PID_BUF; + *ctr = RUSB2_PIPE_CTR_PID_BUF; } return true; } @@ -740,49 +740,49 @@ void hcd_int_handler(uint8_t rhport) 20, 8, 19, 18}; #endif - unsigned is1 = LINK_REG->INTSTS1; - unsigned is0 = LINK_REG->INTSTS0; + unsigned is1 = RUSB2->INTSTS1; + unsigned is0 = RUSB2->INTSTS0; /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ - LINK_REG->INTSTS1 = ~((LINK_REG_INTSTS1_SACK_Msk | LINK_REG_INTSTS1_SIGN_Msk | LINK_REG_INTSTS1_ATTCH_Msk | LINK_REG_INTSTS1_DTCH_Msk) & is1); - LINK_REG->INTSTS0 = ~((LINK_REG_INTSTS0_BRDY_Msk | LINK_REG_INTSTS0_NRDY_Msk | LINK_REG_INTSTS0_BEMP_Msk) & is0); + RUSB2->INTSTS1 = ~((RUSB2_INTSTS1_SACK_Msk | RUSB2_INTSTS1_SIGN_Msk | RUSB2_INTSTS1_ATTCH_Msk | RUSB2_INTSTS1_DTCH_Msk) & is1); + RUSB2->INTSTS0 = ~((RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_NRDY_Msk | RUSB2_INTSTS0_BEMP_Msk) & is0); // TU_LOG1("IS %04x %04x\n", is0, is1); - is1 &= LINK_REG->INTENB1; - is0 &= LINK_REG->INTENB0; + is1 &= RUSB2->INTENB1; + is0 &= RUSB2->INTENB0; - if (is1 & LINK_REG_INTSTS1_SACK_Msk) { + if (is1 & RUSB2_INTSTS1_SACK_Msk) { /* Set DATA1 in advance for the next transfer. */ - LINK_REG->DCPCTR_b.SQSET = 1; - hcd_event_xfer_complete(LINK_REG->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_SUCCESS, true); + RUSB2->DCPCTR_b.SQSET = 1; + hcd_event_xfer_complete(RUSB2->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_SUCCESS, true); } - if (is1 & LINK_REG_INTSTS1_SIGN_Msk) { - hcd_event_xfer_complete(LINK_REG->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_FAILED, true); + if (is1 & RUSB2_INTSTS1_SIGN_Msk) { + hcd_event_xfer_complete(RUSB2->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_FAILED, true); } - if (is1 & LINK_REG_INTSTS1_ATTCH_Msk) { - LINK_REG->DVSTCTR0_b.UACT = 1; + if (is1 & RUSB2_INTSTS1_ATTCH_Msk) { + RUSB2->DVSTCTR0_b.UACT = 1; _hcd.need_reset = true; - LINK_REG->INTENB1 = (LINK_REG->INTENB1 & ~LINK_REG_INTSTS1_ATTCH_Msk) | LINK_REG_INTSTS1_DTCH_Msk; + RUSB2->INTENB1 = (RUSB2->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; hcd_event_device_attach(rhport, true); } - if (is1 & LINK_REG_INTSTS1_DTCH_Msk) { - LINK_REG->DVSTCTR0_b.UACT = 0; - if (LINK_REG->DCPCTR_b.SUREQ) { - LINK_REG->DCPCTR_b.SUREQCLR = 1; + if (is1 & RUSB2_INTSTS1_DTCH_Msk) { + RUSB2->DVSTCTR0_b.UACT = 0; + if (RUSB2->DCPCTR_b.SUREQ) { + RUSB2->DCPCTR_b.SUREQCLR = 1; } - LINK_REG->INTENB1 = (LINK_REG->INTENB1 & ~LINK_REG_INTSTS1_DTCH_Msk) | LINK_REG_INTSTS1_ATTCH_Msk; + RUSB2->INTENB1 = (RUSB2->INTENB1 & ~RUSB2_INTSTS1_DTCH_Msk) | RUSB2_INTSTS1_ATTCH_Msk; hcd_event_device_remove(rhport, true); } - if (is0 & LINK_REG_INTSTS0_BEMP_Msk) { - const unsigned s = LINK_REG->BEMPSTS; - LINK_REG->BEMPSTS = 0; + if (is0 & RUSB2_INTSTS0_BEMP_Msk) { + const unsigned s = RUSB2->BEMPSTS; + RUSB2->BEMPSTS = 0; if (s & 1) { process_pipe0_bemp(rhport); } } - if (is0 & LINK_REG_INTSTS0_NRDY_Msk) { - const unsigned m = LINK_REG->NRDYENB; - unsigned s = LINK_REG->NRDYSTS & m; - LINK_REG->NRDYSTS = ~s; + if (is0 & RUSB2_INTSTS0_NRDY_Msk) { + const unsigned m = RUSB2->NRDYENB; + unsigned s = RUSB2->NRDYSTS & m; + RUSB2->NRDYSTS = ~s; while (s) { #if defined(__CCRX__) const unsigned num = Mod37BitPosition[(-s & s) % 37]; @@ -793,11 +793,11 @@ void hcd_int_handler(uint8_t rhport) s &= ~TU_BIT(num); } } - if (is0 & LINK_REG_INTSTS0_BRDY_Msk) { - const unsigned m = LINK_REG->BRDYENB; - unsigned s = LINK_REG->BRDYSTS & m; + if (is0 & RUSB2_INTSTS0_BRDY_Msk) { + const unsigned m = RUSB2->BRDYENB; + unsigned s = RUSB2->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ - LINK_REG->BRDYSTS = ~s; + RUSB2->BRDYSTS = ~s; while (s) { #if defined(__CCRX__) const unsigned num = Mod37BitPosition[(-s & s) % 37]; diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index a73b13951..24658e95a 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -34,24 +34,22 @@ extern "C" { /* renesas fsp api */ #include "bsp_api.h" -#define LINK_REG_BASE (0x40090000) +#define RUSB2_REG_BASE (0x40090000) -TU_ATTR_ALWAYS_INLINE -static inline void link_int_enable(uint8_t rhport) +TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_enable(uint8_t rhport) { (void) rhport; NVIC_EnableIRQ(TU_IRQn); } -TU_ATTR_ALWAYS_INLINE -static inline void link_int_disable(uint8_t rhport) +TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_disable(uint8_t rhport) { (void) rhport; NVIC_DisableIRQ(TU_IRQn); } // MCU specific PHY init -static inline void link_phy_init(void) +TU_ATTR_ALWAYS_INLINE static inline void rusb2_phy_init(void) { } diff --git a/src/portable/renesas/rusb2/rusb2_rx.h b/src/portable/renesas/rusb2/rusb2_rx.h index e43253569..c28689df1 100644 --- a/src/portable/renesas/rusb2/rusb2_rx.h +++ b/src/portable/renesas/rusb2/rusb2_rx.h @@ -35,9 +35,9 @@ extern "C" { #include "iodefine.h" -#define LINK_REG_BASE (0x000A0000) +#define RUSB2_REG_BASE (0x000A0000) -TU_ATTR_ALWAYS_INLINE static inline void link_int_enable(uint8_t rhport) +TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_enable(uint8_t rhport) { (void) rhport; #if (CFG_TUSB_MCU == OPT_MCU_RX72N) @@ -47,7 +47,7 @@ TU_ATTR_ALWAYS_INLINE static inline void link_int_enable(uint8_t rhport) #endif } -TU_ATTR_ALWAYS_INLINE static inline void link_int_disable(uint8_t rhport) +TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_disable(uint8_t rhport) { (void) rhport; #if (CFG_TUSB_MCU == OPT_MCU_RX72N) @@ -58,7 +58,7 @@ TU_ATTR_ALWAYS_INLINE static inline void link_int_disable(uint8_t rhport) } // MCU specific PHY init -TU_ATTR_ALWAYS_INLINE static inline void link_phy_init(void) +TU_ATTR_ALWAYS_INLINE static inline void rusb2_phy_init(void) { #if (CFG_TUSB_MCU == OPT_MCU_RX72N) IR(PERIB, INTB185) = 0; diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index cb3db650a..6a5c7f8ff 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -60,7 +60,7 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t TRNCNT : 16; /* [15..0] Transaction Counter */ } N_b; }; -} LINK_REG_PIPE_TR_t; /* Size = 4 (0x4) */ +} RUSB2_PIPE_TR_t; /* Size = 4 (0x4) */ /* LINK_REG Structure */ typedef struct TU_ATTR_PACKED { @@ -685,7 +685,7 @@ typedef struct TU_ATTR_PACKED { }; volatile const uint16_t RESERVED13; volatile const uint32_t RESERVED14[3]; - volatile LINK_REG_PIPE_TR_t PIPE_TR[5]; /* (@ 0x00000090) Pipe Transaction Counter Registers */ + volatile RUSB2_PIPE_TR_t PIPE_TR[5]; /* (@ 0x00000090) Pipe Transaction Counter Registers */ volatile const uint32_t RESERVED15[3]; union { @@ -950,7 +950,7 @@ typedef struct TU_ATTR_PACKED { uint32_t : 8; } DPUSR1R_FS_b; }; -} LINK_REG_t; /* Size = 1032 (0x408) */ +} RUSB2_REG_t; /* Size = 1032 (0x408) */ TU_ATTR_PACKED_END /* End of definition of packed structs (used by the CCRX toolchain) */ TU_ATTR_BIT_FIELD_ORDER_END @@ -961,706 +961,706 @@ TU_ATTR_BIT_FIELD_ORDER_END // PIPE_TR // E -#define LINK_REG_PIPE_TR_E_TRENB_Pos (9UL) /* TRENB (Bit 9) */ -#define LINK_REG_PIPE_TR_E_TRENB_Msk (0x200UL) /* TRENB (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_TR_E_TRCLR_Pos (8UL) /* TRCLR (Bit 8) */ -#define LINK_REG_PIPE_TR_E_TRCLR_Msk (0x100UL) /* TRCLR (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_TR_E_TRENB_Pos (9UL) /* TRENB (Bit 9) */ +#define RUSB2_PIPE_TR_E_TRENB_Msk (0x200UL) /* TRENB (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_TR_E_TRCLR_Pos (8UL) /* TRCLR (Bit 8) */ +#define RUSB2_PIPE_TR_E_TRCLR_Msk (0x100UL) /* TRCLR (Bitfield-Mask: 0x01) */ // N -#define LINK_REG_PIPE_TR_N_TRNCNT_Pos (0UL) /* TRNCNT (Bit 0) */ -#define LINK_REG_PIPE_TR_N_TRNCNT_Msk (0xffffUL) /* TRNCNT (Bitfield-Mask: 0xffff) */ +#define RUSB2_PIPE_TR_N_TRNCNT_Pos (0UL) /* TRNCNT (Bit 0) */ +#define RUSB2_PIPE_TR_N_TRNCNT_Msk (0xffffUL) /* TRNCNT (Bitfield-Mask: 0xffff) */ // LINK_REG // SYSCFG -#define LINK_REG_SYSCFG_SCKE_Pos (10UL) /* SCKE (Bit 10) */ -#define LINK_REG_SYSCFG_SCKE_Msk (0x400UL) /* SCKE (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_CNEN_Pos (8UL) /* CNEN (Bit 8) */ -#define LINK_REG_SYSCFG_CNEN_Msk (0x100UL) /* CNEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_DCFM_Pos (6UL) /* DCFM (Bit 6) */ -#define LINK_REG_SYSCFG_DCFM_Msk (0x40UL) /* DCFM (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_DRPD_Pos (5UL) /* DRPD (Bit 5) */ -#define LINK_REG_SYSCFG_DRPD_Msk (0x20UL) /* DRPD (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_DPRPU_Pos (4UL) /* DPRPU (Bit 4) */ -#define LINK_REG_SYSCFG_DPRPU_Msk (0x10UL) /* DPRPU (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_DMRPU_Pos (3UL) /* DMRPU (Bit 3) */ -#define LINK_REG_SYSCFG_DMRPU_Msk (0x8UL) /* DMRPU (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_USBE_Pos (0UL) /* USBE (Bit 0) */ -#define LINK_REG_SYSCFG_USBE_Msk (0x1UL) /* USBE (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSCFG_SCKE_Pos (10UL) /* SCKE (Bit 10) */ +#define RUSB2_SYSCFG_SCKE_Msk (0x400UL) /* SCKE (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSCFG_CNEN_Pos (8UL) /* CNEN (Bit 8) */ +#define RUSB2_SYSCFG_CNEN_Msk (0x100UL) /* CNEN (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSCFG_DCFM_Pos (6UL) /* DCFM (Bit 6) */ +#define RUSB2_SYSCFG_DCFM_Msk (0x40UL) /* DCFM (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSCFG_DRPD_Pos (5UL) /* DRPD (Bit 5) */ +#define RUSB2_SYSCFG_DRPD_Msk (0x20UL) /* DRPD (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSCFG_DPRPU_Pos (4UL) /* DPRPU (Bit 4) */ +#define RUSB2_SYSCFG_DPRPU_Msk (0x10UL) /* DPRPU (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSCFG_DMRPU_Pos (3UL) /* DMRPU (Bit 3) */ +#define RUSB2_SYSCFG_DMRPU_Msk (0x8UL) /* DMRPU (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSCFG_USBE_Pos (0UL) /* USBE (Bit 0) */ +#define RUSB2_SYSCFG_USBE_Msk (0x1UL) /* USBE (Bitfield-Mask: 0x01) */ // BUSWAIT -#define LINK_REG_BUSWAIT_BWAIT_Pos (0UL) /* BWAIT (Bit 0) */ -#define LINK_REG_BUSWAIT_BWAIT_Msk (0xfUL) /* BWAIT (Bitfield-Mask: 0x0f) */ +#define RUSB2_BUSWAIT_BWAIT_Pos (0UL) /* BWAIT (Bit 0) */ +#define RUSB2_BUSWAIT_BWAIT_Msk (0xfUL) /* BWAIT (Bitfield-Mask: 0x0f) */ // SYSSTS0 -#define LINK_REG_SYSSTS0_OVCMON_Pos (14UL) /* OVCMON (Bit 14) */ -#define LINK_REG_SYSSTS0_OVCMON_Msk (0xc000UL) /* OVCMON (Bitfield-Mask: 0x03) */ -#define LINK_REG_SYSSTS0_HTACT_Pos (6UL) /* HTACT (Bit 6) */ -#define LINK_REG_SYSSTS0_HTACT_Msk (0x40UL) /* HTACT (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSSTS0_SOFEA_Pos (5UL) /* SOFEA (Bit 5) */ -#define LINK_REG_SYSSTS0_SOFEA_Msk (0x20UL) /* SOFEA (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSSTS0_IDMON_Pos (2UL) /* IDMON (Bit 2) */ -#define LINK_REG_SYSSTS0_IDMON_Msk (0x4UL) /* IDMON (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSSTS0_LNST_Pos (0UL) /* LNST (Bit 0) */ -#define LINK_REG_SYSSTS0_LNST_Msk (0x3UL) /* LNST (Bitfield-Mask: 0x03) */ +#define RUSB2_SYSSTS0_OVCMON_Pos (14UL) /* OVCMON (Bit 14) */ +#define RUSB2_SYSSTS0_OVCMON_Msk (0xc000UL) /* OVCMON (Bitfield-Mask: 0x03) */ +#define RUSB2_SYSSTS0_HTACT_Pos (6UL) /* HTACT (Bit 6) */ +#define RUSB2_SYSSTS0_HTACT_Msk (0x40UL) /* HTACT (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSSTS0_SOFEA_Pos (5UL) /* SOFEA (Bit 5) */ +#define RUSB2_SYSSTS0_SOFEA_Msk (0x20UL) /* SOFEA (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSSTS0_IDMON_Pos (2UL) /* IDMON (Bit 2) */ +#define RUSB2_SYSSTS0_IDMON_Msk (0x4UL) /* IDMON (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSSTS0_LNST_Pos (0UL) /* LNST (Bit 0) */ +#define RUSB2_SYSSTS0_LNST_Msk (0x3UL) /* LNST (Bitfield-Mask: 0x03) */ // PLLSTA -#define LINK_REG_PLLSTA_PLLLOCK_Pos (0UL) /* PLLLOCK (Bit 0) */ -#define LINK_REG_PLLSTA_PLLLOCK_Msk (0x1UL) /* PLLLOCK (Bitfield-Mask: 0x01) */ +#define RUSB2_PLLSTA_PLLLOCK_Pos (0UL) /* PLLLOCK (Bit 0) */ +#define RUSB2_PLLSTA_PLLLOCK_Msk (0x1UL) /* PLLLOCK (Bitfield-Mask: 0x01) */ // DVSTCTR0 -#define LINK_REG_DVSTCTR0_HNPBTOA_Pos (11UL) /* HNPBTOA (Bit 11) */ -#define LINK_REG_DVSTCTR0_HNPBTOA_Msk (0x800UL) /* HNPBTOA (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_EXICEN_Pos (10UL) /* EXICEN (Bit 10) */ -#define LINK_REG_DVSTCTR0_EXICEN_Msk (0x400UL) /* EXICEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_VBUSEN_Pos (9UL) /* VBUSEN (Bit 9) */ -#define LINK_REG_DVSTCTR0_VBUSEN_Msk (0x200UL) /* VBUSEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_WKUP_Pos (8UL) /* WKUP (Bit 8) */ -#define LINK_REG_DVSTCTR0_WKUP_Msk (0x100UL) /* WKUP (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_RWUPE_Pos (7UL) /* RWUPE (Bit 7) */ -#define LINK_REG_DVSTCTR0_RWUPE_Msk (0x80UL) /* RWUPE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_USBRST_Pos (6UL) /* USBRST (Bit 6) */ -#define LINK_REG_DVSTCTR0_USBRST_Msk (0x40UL) /* USBRST (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_RESUME_Pos (5UL) /* RESUME (Bit 5) */ -#define LINK_REG_DVSTCTR0_RESUME_Msk (0x20UL) /* RESUME (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_UACT_Pos (4UL) /* UACT (Bit 4) */ -#define LINK_REG_DVSTCTR0_UACT_Msk (0x10UL) /* UACT (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_RHST_Pos (0UL) /* RHST (Bit 0) */ -#define LINK_REG_DVSTCTR0_RHST_Msk (0x7UL) /* RHST (Bitfield-Mask: 0x07) */ +#define RUSB2_DVSTCTR0_HNPBTOA_Pos (11UL) /* HNPBTOA (Bit 11) */ +#define RUSB2_DVSTCTR0_HNPBTOA_Msk (0x800UL) /* HNPBTOA (Bitfield-Mask: 0x01) */ +#define RUSB2_DVSTCTR0_EXICEN_Pos (10UL) /* EXICEN (Bit 10) */ +#define RUSB2_DVSTCTR0_EXICEN_Msk (0x400UL) /* EXICEN (Bitfield-Mask: 0x01) */ +#define RUSB2_DVSTCTR0_VBUSEN_Pos (9UL) /* VBUSEN (Bit 9) */ +#define RUSB2_DVSTCTR0_VBUSEN_Msk (0x200UL) /* VBUSEN (Bitfield-Mask: 0x01) */ +#define RUSB2_DVSTCTR0_WKUP_Pos (8UL) /* WKUP (Bit 8) */ +#define RUSB2_DVSTCTR0_WKUP_Msk (0x100UL) /* WKUP (Bitfield-Mask: 0x01) */ +#define RUSB2_DVSTCTR0_RWUPE_Pos (7UL) /* RWUPE (Bit 7) */ +#define RUSB2_DVSTCTR0_RWUPE_Msk (0x80UL) /* RWUPE (Bitfield-Mask: 0x01) */ +#define RUSB2_DVSTCTR0_USBRST_Pos (6UL) /* USBRST (Bit 6) */ +#define RUSB2_DVSTCTR0_USBRST_Msk (0x40UL) /* USBRST (Bitfield-Mask: 0x01) */ +#define RUSB2_DVSTCTR0_RESUME_Pos (5UL) /* RESUME (Bit 5) */ +#define RUSB2_DVSTCTR0_RESUME_Msk (0x20UL) /* RESUME (Bitfield-Mask: 0x01) */ +#define RUSB2_DVSTCTR0_UACT_Pos (4UL) /* UACT (Bit 4) */ +#define RUSB2_DVSTCTR0_UACT_Msk (0x10UL) /* UACT (Bitfield-Mask: 0x01) */ +#define RUSB2_DVSTCTR0_RHST_Pos (0UL) /* RHST (Bit 0) */ +#define RUSB2_DVSTCTR0_RHST_Msk (0x7UL) /* RHST (Bitfield-Mask: 0x07) */ // TESTMODE -#define LINK_REG_TESTMODE_UTST_Pos (0UL) /* UTST (Bit 0) */ -#define LINK_REG_TESTMODE_UTST_Msk (0xfUL) /* UTST (Bitfield-Mask: 0x0f) */ +#define RUSB2_TESTMODE_UTST_Pos (0UL) /* UTST (Bit 0) */ +#define RUSB2_TESTMODE_UTST_Msk (0xfUL) /* UTST (Bitfield-Mask: 0x0f) */ // CFIFOSEL -#define LINK_REG_CFIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ -#define LINK_REG_CFIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ -#define LINK_REG_CFIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ -#define LINK_REG_CFIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ -#define LINK_REG_CFIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ -#define LINK_REG_CFIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOSEL_ISEL_Pos (5UL) /* ISEL (Bit 5) */ -#define LINK_REG_CFIFOSEL_ISEL_Msk (0x20UL) /* ISEL (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ -#define LINK_REG_CFIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ +#define RUSB2_CFIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ +#define RUSB2_CFIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ +#define RUSB2_CFIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ +#define RUSB2_CFIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ +#define RUSB2_CFIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ +#define RUSB2_CFIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ +#define RUSB2_CFIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ +#define RUSB2_CFIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ +#define RUSB2_CFIFOSEL_ISEL_Pos (5UL) /* ISEL (Bit 5) */ +#define RUSB2_CFIFOSEL_ISEL_Msk (0x20UL) /* ISEL (Bitfield-Mask: 0x01) */ +#define RUSB2_CFIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ +#define RUSB2_CFIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ // CFIFOCTR -#define LINK_REG_CFIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ -#define LINK_REG_CFIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ -#define LINK_REG_CFIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ -#define LINK_REG_CFIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ -#define LINK_REG_CFIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ +#define RUSB2_CFIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ +#define RUSB2_CFIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ +#define RUSB2_CFIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ +#define RUSB2_CFIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ +#define RUSB2_CFIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ +#define RUSB2_CFIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ +#define RUSB2_CFIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ +#define RUSB2_CFIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ // D0FIFOSEL -#define LINK_REG_D0FIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ -#define LINK_REG_D0FIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ -#define LINK_REG_D0FIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_DCLRM_Pos (13UL) /* DCLRM (Bit 13) */ -#define LINK_REG_D0FIFOSEL_DCLRM_Msk (0x2000UL) /* DCLRM (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_DREQE_Pos (12UL) /* DREQE (Bit 12) */ -#define LINK_REG_D0FIFOSEL_DREQE_Msk (0x1000UL) /* DREQE (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ -#define LINK_REG_D0FIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ -#define LINK_REG_D0FIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ -#define LINK_REG_D0FIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ -#define LINK_REG_D0FIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ +#define RUSB2_D0FIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ +#define RUSB2_D0FIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ +#define RUSB2_D0FIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ +#define RUSB2_D0FIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ +#define RUSB2_D0FIFOSEL_DCLRM_Pos (13UL) /* DCLRM (Bit 13) */ +#define RUSB2_D0FIFOSEL_DCLRM_Msk (0x2000UL) /* DCLRM (Bitfield-Mask: 0x01) */ +#define RUSB2_D0FIFOSEL_DREQE_Pos (12UL) /* DREQE (Bit 12) */ +#define RUSB2_D0FIFOSEL_DREQE_Msk (0x1000UL) /* DREQE (Bitfield-Mask: 0x01) */ +#define RUSB2_D0FIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ +#define RUSB2_D0FIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ +#define RUSB2_D0FIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ +#define RUSB2_D0FIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ +#define RUSB2_D0FIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ +#define RUSB2_D0FIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ // D0FIFOCTR -#define LINK_REG_D0FIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ -#define LINK_REG_D0FIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ -#define LINK_REG_D0FIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ -#define LINK_REG_D0FIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ -#define LINK_REG_D0FIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ +#define RUSB2_D0FIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ +#define RUSB2_D0FIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ +#define RUSB2_D0FIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ +#define RUSB2_D0FIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ +#define RUSB2_D0FIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ +#define RUSB2_D0FIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ +#define RUSB2_D0FIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ +#define RUSB2_D0FIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ // D1FIFOSEL -#define LINK_REG_D1FIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ -#define LINK_REG_D1FIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ -#define LINK_REG_D1FIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_DCLRM_Pos (13UL) /* DCLRM (Bit 13) */ -#define LINK_REG_D1FIFOSEL_DCLRM_Msk (0x2000UL) /* DCLRM (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_DREQE_Pos (12UL) /* DREQE (Bit 12) */ -#define LINK_REG_D1FIFOSEL_DREQE_Msk (0x1000UL) /* DREQE (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ -#define LINK_REG_D1FIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ -#define LINK_REG_D1FIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ -#define LINK_REG_D1FIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ -#define LINK_REG_D1FIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ +#define RUSB2_D1FIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ +#define RUSB2_D1FIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ +#define RUSB2_D1FIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ +#define RUSB2_D1FIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ +#define RUSB2_D1FIFOSEL_DCLRM_Pos (13UL) /* DCLRM (Bit 13) */ +#define RUSB2_D1FIFOSEL_DCLRM_Msk (0x2000UL) /* DCLRM (Bitfield-Mask: 0x01) */ +#define RUSB2_D1FIFOSEL_DREQE_Pos (12UL) /* DREQE (Bit 12) */ +#define RUSB2_D1FIFOSEL_DREQE_Msk (0x1000UL) /* DREQE (Bitfield-Mask: 0x01) */ +#define RUSB2_D1FIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ +#define RUSB2_D1FIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ +#define RUSB2_D1FIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ +#define RUSB2_D1FIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ +#define RUSB2_D1FIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ +#define RUSB2_D1FIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ // D1FIFOCTR -#define LINK_REG_D1FIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ -#define LINK_REG_D1FIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ -#define LINK_REG_D1FIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ -#define LINK_REG_D1FIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ -#define LINK_REG_D1FIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ +#define RUSB2_D1FIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ +#define RUSB2_D1FIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ +#define RUSB2_D1FIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ +#define RUSB2_D1FIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ +#define RUSB2_D1FIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ +#define RUSB2_D1FIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ +#define RUSB2_D1FIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ +#define RUSB2_D1FIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ // INTENB0 -#define LINK_REG_INTENB0_VBSE_Pos (15UL) /* VBSE (Bit 15) */ -#define LINK_REG_INTENB0_VBSE_Msk (0x8000UL) /* VBSE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_RSME_Pos (14UL) /* RSME (Bit 14) */ -#define LINK_REG_INTENB0_RSME_Msk (0x4000UL) /* RSME (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_SOFE_Pos (13UL) /* SOFE (Bit 13) */ -#define LINK_REG_INTENB0_SOFE_Msk (0x2000UL) /* SOFE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_DVSE_Pos (12UL) /* DVSE (Bit 12) */ -#define LINK_REG_INTENB0_DVSE_Msk (0x1000UL) /* DVSE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_CTRE_Pos (11UL) /* CTRE (Bit 11) */ -#define LINK_REG_INTENB0_CTRE_Msk (0x800UL) /* CTRE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_BEMPE_Pos (10UL) /* BEMPE (Bit 10) */ -#define LINK_REG_INTENB0_BEMPE_Msk (0x400UL) /* BEMPE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_NRDYE_Pos (9UL) /* NRDYE (Bit 9) */ -#define LINK_REG_INTENB0_NRDYE_Msk (0x200UL) /* NRDYE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_BRDYE_Pos (8UL) /* BRDYE (Bit 8) */ -#define LINK_REG_INTENB0_BRDYE_Msk (0x100UL) /* BRDYE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB0_VBSE_Pos (15UL) /* VBSE (Bit 15) */ +#define RUSB2_INTENB0_VBSE_Msk (0x8000UL) /* VBSE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB0_RSME_Pos (14UL) /* RSME (Bit 14) */ +#define RUSB2_INTENB0_RSME_Msk (0x4000UL) /* RSME (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB0_SOFE_Pos (13UL) /* SOFE (Bit 13) */ +#define RUSB2_INTENB0_SOFE_Msk (0x2000UL) /* SOFE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB0_DVSE_Pos (12UL) /* DVSE (Bit 12) */ +#define RUSB2_INTENB0_DVSE_Msk (0x1000UL) /* DVSE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB0_CTRE_Pos (11UL) /* CTRE (Bit 11) */ +#define RUSB2_INTENB0_CTRE_Msk (0x800UL) /* CTRE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB0_BEMPE_Pos (10UL) /* BEMPE (Bit 10) */ +#define RUSB2_INTENB0_BEMPE_Msk (0x400UL) /* BEMPE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB0_NRDYE_Pos (9UL) /* NRDYE (Bit 9) */ +#define RUSB2_INTENB0_NRDYE_Msk (0x200UL) /* NRDYE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB0_BRDYE_Pos (8UL) /* BRDYE (Bit 8) */ +#define RUSB2_INTENB0_BRDYE_Msk (0x100UL) /* BRDYE (Bitfield-Mask: 0x01) */ // INTENB1 -#define LINK_REG_INTENB1_OVRCRE_Pos (15UL) /* OVRCRE (Bit 15) */ -#define LINK_REG_INTENB1_OVRCRE_Msk (0x8000UL) /* OVRCRE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_BCHGE_Pos (14UL) /* BCHGE (Bit 14) */ -#define LINK_REG_INTENB1_BCHGE_Msk (0x4000UL) /* BCHGE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_DTCHE_Pos (12UL) /* DTCHE (Bit 12) */ -#define LINK_REG_INTENB1_DTCHE_Msk (0x1000UL) /* DTCHE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_ATTCHE_Pos (11UL) /* ATTCHE (Bit 11) */ -#define LINK_REG_INTENB1_ATTCHE_Msk (0x800UL) /* ATTCHE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_EOFERRE_Pos (6UL) /* EOFERRE (Bit 6) */ -#define LINK_REG_INTENB1_EOFERRE_Msk (0x40UL) /* EOFERRE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_SIGNE_Pos (5UL) /* SIGNE (Bit 5) */ -#define LINK_REG_INTENB1_SIGNE_Msk (0x20UL) /* SIGNE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_SACKE_Pos (4UL) /* SACKE (Bit 4) */ -#define LINK_REG_INTENB1_SACKE_Msk (0x10UL) /* SACKE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_PDDETINTE0_Pos (0UL) /* PDDETINTE0 (Bit 0) */ -#define LINK_REG_INTENB1_PDDETINTE0_Msk (0x1UL) /* PDDETINTE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_OVRCRE_Pos (15UL) /* OVRCRE (Bit 15) */ +#define RUSB2_INTENB1_OVRCRE_Msk (0x8000UL) /* OVRCRE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_BCHGE_Pos (14UL) /* BCHGE (Bit 14) */ +#define RUSB2_INTENB1_BCHGE_Msk (0x4000UL) /* BCHGE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_DTCHE_Pos (12UL) /* DTCHE (Bit 12) */ +#define RUSB2_INTENB1_DTCHE_Msk (0x1000UL) /* DTCHE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_ATTCHE_Pos (11UL) /* ATTCHE (Bit 11) */ +#define RUSB2_INTENB1_ATTCHE_Msk (0x800UL) /* ATTCHE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_EOFERRE_Pos (6UL) /* EOFERRE (Bit 6) */ +#define RUSB2_INTENB1_EOFERRE_Msk (0x40UL) /* EOFERRE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_SIGNE_Pos (5UL) /* SIGNE (Bit 5) */ +#define RUSB2_INTENB1_SIGNE_Msk (0x20UL) /* SIGNE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_SACKE_Pos (4UL) /* SACKE (Bit 4) */ +#define RUSB2_INTENB1_SACKE_Msk (0x10UL) /* SACKE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_PDDETINTE0_Pos (0UL) /* PDDETINTE0 (Bit 0) */ +#define RUSB2_INTENB1_PDDETINTE0_Msk (0x1UL) /* PDDETINTE0 (Bitfield-Mask: 0x01) */ // BRDYENB -#define LINK_REG_BRDYENB_PIPEBRDYE_Pos (0UL) /* PIPEBRDYE (Bit 0) */ -#define LINK_REG_BRDYENB_PIPEBRDYE_Msk (0x1UL) /* PIPEBRDYE (Bitfield-Mask: 0x01) */ +#define RUSB2_BRDYENB_PIPEBRDYE_Pos (0UL) /* PIPEBRDYE (Bit 0) */ +#define RUSB2_BRDYENB_PIPEBRDYE_Msk (0x1UL) /* PIPEBRDYE (Bitfield-Mask: 0x01) */ // NRDYENB -#define LINK_REG_NRDYENB_PIPENRDYE_Pos (0UL) /* PIPENRDYE (Bit 0) */ -#define LINK_REG_NRDYENB_PIPENRDYE_Msk (0x1UL) /* PIPENRDYE (Bitfield-Mask: 0x01) */ +#define RUSB2_NRDYENB_PIPENRDYE_Pos (0UL) /* PIPENRDYE (Bit 0) */ +#define RUSB2_NRDYENB_PIPENRDYE_Msk (0x1UL) /* PIPENRDYE (Bitfield-Mask: 0x01) */ // BEMPENB -#define LINK_REG_BEMPENB_PIPEBEMPE_Pos (0UL) /* PIPEBEMPE (Bit 0) */ -#define LINK_REG_BEMPENB_PIPEBEMPE_Msk (0x1UL) /* PIPEBEMPE (Bitfield-Mask: 0x01) */ +#define RUSB2_BEMPENB_PIPEBEMPE_Pos (0UL) /* PIPEBEMPE (Bit 0) */ +#define RUSB2_BEMPENB_PIPEBEMPE_Msk (0x1UL) /* PIPEBEMPE (Bitfield-Mask: 0x01) */ // SOFCFG -#define LINK_REG_SOFCFG_TRNENSEL_Pos (8UL) /* TRNENSEL (Bit 8) */ -#define LINK_REG_SOFCFG_TRNENSEL_Msk (0x100UL) /* TRNENSEL (Bitfield-Mask: 0x01) */ -#define LINK_REG_SOFCFG_BRDYM_Pos (6UL) /* BRDYM (Bit 6) */ -#define LINK_REG_SOFCFG_BRDYM_Msk (0x40UL) /* BRDYM (Bitfield-Mask: 0x01) */ -#define LINK_REG_SOFCFG_INTL_Pos (5UL) /* INTL (Bit 5) */ -#define LINK_REG_SOFCFG_INTL_Msk (0x20UL) /* INTL (Bitfield-Mask: 0x01) */ -#define LINK_REG_SOFCFG_EDGESTS_Pos (4UL) /* EDGESTS (Bit 4) */ -#define LINK_REG_SOFCFG_EDGESTS_Msk (0x10UL) /* EDGESTS (Bitfield-Mask: 0x01) */ +#define RUSB2_SOFCFG_TRNENSEL_Pos (8UL) /* TRNENSEL (Bit 8) */ +#define RUSB2_SOFCFG_TRNENSEL_Msk (0x100UL) /* TRNENSEL (Bitfield-Mask: 0x01) */ +#define RUSB2_SOFCFG_BRDYM_Pos (6UL) /* BRDYM (Bit 6) */ +#define RUSB2_SOFCFG_BRDYM_Msk (0x40UL) /* BRDYM (Bitfield-Mask: 0x01) */ +#define RUSB2_SOFCFG_INTL_Pos (5UL) /* INTL (Bit 5) */ +#define RUSB2_SOFCFG_INTL_Msk (0x20UL) /* INTL (Bitfield-Mask: 0x01) */ +#define RUSB2_SOFCFG_EDGESTS_Pos (4UL) /* EDGESTS (Bit 4) */ +#define RUSB2_SOFCFG_EDGESTS_Msk (0x10UL) /* EDGESTS (Bitfield-Mask: 0x01) */ // PHYSET -#define LINK_REG_PHYSET_HSEB_Pos (15UL) /* HSEB (Bit 15) */ -#define LINK_REG_PHYSET_HSEB_Msk (0x8000UL) /* HSEB (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSET_REPSTART_Pos (11UL) /* REPSTART (Bit 11) */ -#define LINK_REG_PHYSET_REPSTART_Msk (0x800UL) /* REPSTART (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSET_REPSEL_Pos (8UL) /* REPSEL (Bit 8) */ -#define LINK_REG_PHYSET_REPSEL_Msk (0x300UL) /* REPSEL (Bitfield-Mask: 0x03) */ -#define LINK_REG_PHYSET_CLKSEL_Pos (4UL) /* CLKSEL (Bit 4) */ -#define LINK_REG_PHYSET_CLKSEL_Msk (0x30UL) /* CLKSEL (Bitfield-Mask: 0x03) */ -#define LINK_REG_PHYSET_CDPEN_Pos (3UL) /* CDPEN (Bit 3) */ -#define LINK_REG_PHYSET_CDPEN_Msk (0x8UL) /* CDPEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSET_PLLRESET_Pos (1UL) /* PLLRESET (Bit 1) */ -#define LINK_REG_PHYSET_PLLRESET_Msk (0x2UL) /* PLLRESET (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSET_DIRPD_Pos (0UL) /* DIRPD (Bit 0) */ -#define LINK_REG_PHYSET_DIRPD_Msk (0x1UL) /* DIRPD (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYSET_HSEB_Pos (15UL) /* HSEB (Bit 15) */ +#define RUSB2_PHYSET_HSEB_Msk (0x8000UL) /* HSEB (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYSET_REPSTART_Pos (11UL) /* REPSTART (Bit 11) */ +#define RUSB2_PHYSET_REPSTART_Msk (0x800UL) /* REPSTART (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYSET_REPSEL_Pos (8UL) /* REPSEL (Bit 8) */ +#define RUSB2_PHYSET_REPSEL_Msk (0x300UL) /* REPSEL (Bitfield-Mask: 0x03) */ +#define RUSB2_PHYSET_CLKSEL_Pos (4UL) /* CLKSEL (Bit 4) */ +#define RUSB2_PHYSET_CLKSEL_Msk (0x30UL) /* CLKSEL (Bitfield-Mask: 0x03) */ +#define RUSB2_PHYSET_CDPEN_Pos (3UL) /* CDPEN (Bit 3) */ +#define RUSB2_PHYSET_CDPEN_Msk (0x8UL) /* CDPEN (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYSET_PLLRESET_Pos (1UL) /* PLLRESET (Bit 1) */ +#define RUSB2_PHYSET_PLLRESET_Msk (0x2UL) /* PLLRESET (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYSET_DIRPD_Pos (0UL) /* DIRPD (Bit 0) */ +#define RUSB2_PHYSET_DIRPD_Msk (0x1UL) /* DIRPD (Bitfield-Mask: 0x01) */ // INTSTS0 -#define LINK_REG_INTSTS0_VBINT_Pos (15UL) /* VBINT (Bit 15) */ -#define LINK_REG_INTSTS0_VBINT_Msk (0x8000UL) /* VBINT (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_RESM_Pos (14UL) /* RESM (Bit 14) */ -#define LINK_REG_INTSTS0_RESM_Msk (0x4000UL) /* RESM (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_SOFR_Pos (13UL) /* SOFR (Bit 13) */ -#define LINK_REG_INTSTS0_SOFR_Msk (0x2000UL) /* SOFR (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_DVST_Pos (12UL) /* DVST (Bit 12) */ -#define LINK_REG_INTSTS0_DVST_Msk (0x1000UL) /* DVST (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_CTRT_Pos (11UL) /* CTRT (Bit 11) */ -#define LINK_REG_INTSTS0_CTRT_Msk (0x800UL) /* CTRT (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_BEMP_Pos (10UL) /* BEMP (Bit 10) */ -#define LINK_REG_INTSTS0_BEMP_Msk (0x400UL) /* BEMP (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_NRDY_Pos (9UL) /* NRDY (Bit 9) */ -#define LINK_REG_INTSTS0_NRDY_Msk (0x200UL) /* NRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_BRDY_Pos (8UL) /* BRDY (Bit 8) */ -#define LINK_REG_INTSTS0_BRDY_Msk (0x100UL) /* BRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_VBSTS_Pos (7UL) /* VBSTS (Bit 7) */ -#define LINK_REG_INTSTS0_VBSTS_Msk (0x80UL) /* VBSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_DVSQ_Pos (4UL) /* DVSQ (Bit 4) */ -#define LINK_REG_INTSTS0_DVSQ_Msk (0x70UL) /* DVSQ (Bitfield-Mask: 0x07) */ -#define LINK_REG_INTSTS0_VALID_Pos (3UL) /* VALID (Bit 3) */ -#define LINK_REG_INTSTS0_VALID_Msk (0x8UL) /* VALID (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_CTSQ_Pos (0UL) /* CTSQ (Bit 0) */ -#define LINK_REG_INTSTS0_CTSQ_Msk (0x7UL) /* CTSQ (Bitfield-Mask: 0x07) */ +#define RUSB2_INTSTS0_VBINT_Pos (15UL) /* VBINT (Bit 15) */ +#define RUSB2_INTSTS0_VBINT_Msk (0x8000UL) /* VBINT (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_RESM_Pos (14UL) /* RESM (Bit 14) */ +#define RUSB2_INTSTS0_RESM_Msk (0x4000UL) /* RESM (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_SOFR_Pos (13UL) /* SOFR (Bit 13) */ +#define RUSB2_INTSTS0_SOFR_Msk (0x2000UL) /* SOFR (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_DVST_Pos (12UL) /* DVST (Bit 12) */ +#define RUSB2_INTSTS0_DVST_Msk (0x1000UL) /* DVST (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_CTRT_Pos (11UL) /* CTRT (Bit 11) */ +#define RUSB2_INTSTS0_CTRT_Msk (0x800UL) /* CTRT (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_BEMP_Pos (10UL) /* BEMP (Bit 10) */ +#define RUSB2_INTSTS0_BEMP_Msk (0x400UL) /* BEMP (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_NRDY_Pos (9UL) /* NRDY (Bit 9) */ +#define RUSB2_INTSTS0_NRDY_Msk (0x200UL) /* NRDY (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_BRDY_Pos (8UL) /* BRDY (Bit 8) */ +#define RUSB2_INTSTS0_BRDY_Msk (0x100UL) /* BRDY (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_VBSTS_Pos (7UL) /* VBSTS (Bit 7) */ +#define RUSB2_INTSTS0_VBSTS_Msk (0x80UL) /* VBSTS (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_DVSQ_Pos (4UL) /* DVSQ (Bit 4) */ +#define RUSB2_INTSTS0_DVSQ_Msk (0x70UL) /* DVSQ (Bitfield-Mask: 0x07) */ +#define RUSB2_INTSTS0_VALID_Pos (3UL) /* VALID (Bit 3) */ +#define RUSB2_INTSTS0_VALID_Msk (0x8UL) /* VALID (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS0_CTSQ_Pos (0UL) /* CTSQ (Bit 0) */ +#define RUSB2_INTSTS0_CTSQ_Msk (0x7UL) /* CTSQ (Bitfield-Mask: 0x07) */ // INTSTS1 -#define LINK_REG_INTSTS1_OVRCR_Pos (15UL) /* OVRCR (Bit 15) */ -#define LINK_REG_INTSTS1_OVRCR_Msk (0x8000UL) /* OVRCR (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_BCHG_Pos (14UL) /* BCHG (Bit 14) */ -#define LINK_REG_INTSTS1_BCHG_Msk (0x4000UL) /* BCHG (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_DTCH_Pos (12UL) /* DTCH (Bit 12) */ -#define LINK_REG_INTSTS1_DTCH_Msk (0x1000UL) /* DTCH (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_ATTCH_Pos (11UL) /* ATTCH (Bit 11) */ -#define LINK_REG_INTSTS1_ATTCH_Msk (0x800UL) /* ATTCH (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_L1RSMEND_Pos (9UL) /* L1RSMEND (Bit 9) */ -#define LINK_REG_INTSTS1_L1RSMEND_Msk (0x200UL) /* L1RSMEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_LPMEND_Pos (8UL) /* LPMEND (Bit 8) */ -#define LINK_REG_INTSTS1_LPMEND_Msk (0x100UL) /* LPMEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_EOFERR_Pos (6UL) /* EOFERR (Bit 6) */ -#define LINK_REG_INTSTS1_EOFERR_Msk (0x40UL) /* EOFERR (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_SIGN_Pos (5UL) /* SIGN (Bit 5) */ -#define LINK_REG_INTSTS1_SIGN_Msk (0x20UL) /* SIGN (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_SACK_Pos (4UL) /* SACK (Bit 4) */ -#define LINK_REG_INTSTS1_SACK_Msk (0x10UL) /* SACK (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_PDDETINT0_Pos (0UL) /* PDDETINT0 (Bit 0) */ -#define LINK_REG_INTSTS1_PDDETINT0_Msk (0x1UL) /* PDDETINT0 (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_OVRCR_Pos (15UL) /* OVRCR (Bit 15) */ +#define RUSB2_INTSTS1_OVRCR_Msk (0x8000UL) /* OVRCR (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_BCHG_Pos (14UL) /* BCHG (Bit 14) */ +#define RUSB2_INTSTS1_BCHG_Msk (0x4000UL) /* BCHG (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_DTCH_Pos (12UL) /* DTCH (Bit 12) */ +#define RUSB2_INTSTS1_DTCH_Msk (0x1000UL) /* DTCH (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_ATTCH_Pos (11UL) /* ATTCH (Bit 11) */ +#define RUSB2_INTSTS1_ATTCH_Msk (0x800UL) /* ATTCH (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_L1RSMEND_Pos (9UL) /* L1RSMEND (Bit 9) */ +#define RUSB2_INTSTS1_L1RSMEND_Msk (0x200UL) /* L1RSMEND (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_LPMEND_Pos (8UL) /* LPMEND (Bit 8) */ +#define RUSB2_INTSTS1_LPMEND_Msk (0x100UL) /* LPMEND (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_EOFERR_Pos (6UL) /* EOFERR (Bit 6) */ +#define RUSB2_INTSTS1_EOFERR_Msk (0x40UL) /* EOFERR (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_SIGN_Pos (5UL) /* SIGN (Bit 5) */ +#define RUSB2_INTSTS1_SIGN_Msk (0x20UL) /* SIGN (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_SACK_Pos (4UL) /* SACK (Bit 4) */ +#define RUSB2_INTSTS1_SACK_Msk (0x10UL) /* SACK (Bitfield-Mask: 0x01) */ +#define RUSB2_INTSTS1_PDDETINT0_Pos (0UL) /* PDDETINT0 (Bit 0) */ +#define RUSB2_INTSTS1_PDDETINT0_Msk (0x1UL) /* PDDETINT0 (Bitfield-Mask: 0x01) */ // BRDYSTS -#define LINK_REG_BRDYSTS_PIPEBRDY_Pos (0UL) /* PIPEBRDY (Bit 0) */ -#define LINK_REG_BRDYSTS_PIPEBRDY_Msk (0x1UL) /* PIPEBRDY (Bitfield-Mask: 0x01) */ +#define RUSB2_BRDYSTS_PIPEBRDY_Pos (0UL) /* PIPEBRDY (Bit 0) */ +#define RUSB2_BRDYSTS_PIPEBRDY_Msk (0x1UL) /* PIPEBRDY (Bitfield-Mask: 0x01) */ // NRDYSTS -#define LINK_REG_NRDYSTS_PIPENRDY_Pos (0UL) /* PIPENRDY (Bit 0) */ -#define LINK_REG_NRDYSTS_PIPENRDY_Msk (0x1UL) /* PIPENRDY (Bitfield-Mask: 0x01) */ +#define RUSB2_NRDYSTS_PIPENRDY_Pos (0UL) /* PIPENRDY (Bit 0) */ +#define RUSB2_NRDYSTS_PIPENRDY_Msk (0x1UL) /* PIPENRDY (Bitfield-Mask: 0x01) */ // BEMPSTS -#define LINK_REG_BEMPSTS_PIPEBEMP_Pos (0UL) /* PIPEBEMP (Bit 0) */ -#define LINK_REG_BEMPSTS_PIPEBEMP_Msk (0x1UL) /* PIPEBEMP (Bitfield-Mask: 0x01) */ +#define RUSB2_BEMPSTS_PIPEBEMP_Pos (0UL) /* PIPEBEMP (Bit 0) */ +#define RUSB2_BEMPSTS_PIPEBEMP_Msk (0x1UL) /* PIPEBEMP (Bitfield-Mask: 0x01) */ // FRMNUM -#define LINK_REG_FRMNUM_OVRN_Pos (15UL) /* OVRN (Bit 15) */ -#define LINK_REG_FRMNUM_OVRN_Msk (0x8000UL) /* OVRN (Bitfield-Mask: 0x01) */ -#define LINK_REG_FRMNUM_CRCE_Pos (14UL) /* CRCE (Bit 14) */ -#define LINK_REG_FRMNUM_CRCE_Msk (0x4000UL) /* CRCE (Bitfield-Mask: 0x01) */ -#define LINK_REG_FRMNUM_FRNM_Pos (0UL) /* FRNM (Bit 0) */ -#define LINK_REG_FRMNUM_FRNM_Msk (0x7ffUL) /* FRNM (Bitfield-Mask: 0x7ff) */ +#define RUSB2_FRMNUM_OVRN_Pos (15UL) /* OVRN (Bit 15) */ +#define RUSB2_FRMNUM_OVRN_Msk (0x8000UL) /* OVRN (Bitfield-Mask: 0x01) */ +#define RUSB2_FRMNUM_CRCE_Pos (14UL) /* CRCE (Bit 14) */ +#define RUSB2_FRMNUM_CRCE_Msk (0x4000UL) /* CRCE (Bitfield-Mask: 0x01) */ +#define RUSB2_FRMNUM_FRNM_Pos (0UL) /* FRNM (Bit 0) */ +#define RUSB2_FRMNUM_FRNM_Msk (0x7ffUL) /* FRNM (Bitfield-Mask: 0x7ff) */ // UFRMNUM -#define LINK_REG_UFRMNUM_DVCHG_Pos (15UL) /* DVCHG (Bit 15) */ -#define LINK_REG_UFRMNUM_DVCHG_Msk (0x8000UL) /* DVCHG (Bitfield-Mask: 0x01) */ -#define LINK_REG_UFRMNUM_UFRNM_Pos (0UL) /* UFRNM (Bit 0) */ -#define LINK_REG_UFRMNUM_UFRNM_Msk (0x7UL) /* UFRNM (Bitfield-Mask: 0x07) */ +#define RUSB2_UFRMNUM_DVCHG_Pos (15UL) /* DVCHG (Bit 15) */ +#define RUSB2_UFRMNUM_DVCHG_Msk (0x8000UL) /* DVCHG (Bitfield-Mask: 0x01) */ +#define RUSB2_UFRMNUM_UFRNM_Pos (0UL) /* UFRNM (Bit 0) */ +#define RUSB2_UFRMNUM_UFRNM_Msk (0x7UL) /* UFRNM (Bitfield-Mask: 0x07) */ // USBADDR -#define LINK_REG_USBADDR_STSRECOV0_Pos (8UL) /* STSRECOV0 (Bit 8) */ -#define LINK_REG_USBADDR_STSRECOV0_Msk (0x700UL) /* STSRECOV0 (Bitfield-Mask: 0x07) */ -#define LINK_REG_USBADDR_USBADDR_Pos (0UL) /* USBADDR (Bit 0) */ -#define LINK_REG_USBADDR_USBADDR_Msk (0x7fUL) /* USBADDR (Bitfield-Mask: 0x7f) */ +#define RUSB2_USBADDR_STSRECOV0_Pos (8UL) /* STSRECOV0 (Bit 8) */ +#define RUSB2_USBADDR_STSRECOV0_Msk (0x700UL) /* STSRECOV0 (Bitfield-Mask: 0x07) */ +#define RUSB2_USBADDR_USBADDR_Pos (0UL) /* USBADDR (Bit 0) */ +#define RUSB2_USBADDR_USBADDR_Msk (0x7fUL) /* USBADDR (Bitfield-Mask: 0x7f) */ // USBREQ -#define LINK_REG_USBREQ_BREQUEST_Pos (8UL) /* BREQUEST (Bit 8) */ -#define LINK_REG_USBREQ_BREQUEST_Msk (0xff00UL) /* BREQUEST (Bitfield-Mask: 0xff) */ -#define LINK_REG_USBREQ_BMREQUESTTYPE_Pos (0UL) /* BMREQUESTTYPE (Bit 0) */ -#define LINK_REG_USBREQ_BMREQUESTTYPE_Msk (0xffUL) /* BMREQUESTTYPE (Bitfield-Mask: 0xff) */ +#define RUSB2_USBREQ_BREQUEST_Pos (8UL) /* BREQUEST (Bit 8) */ +#define RUSB2_USBREQ_BREQUEST_Msk (0xff00UL) /* BREQUEST (Bitfield-Mask: 0xff) */ +#define RUSB2_USBREQ_BMREQUESTTYPE_Pos (0UL) /* BMREQUESTTYPE (Bit 0) */ +#define RUSB2_USBREQ_BMREQUESTTYPE_Msk (0xffUL) /* BMREQUESTTYPE (Bitfield-Mask: 0xff) */ // USBVAL -#define LINK_REG_USBVAL_WVALUE_Pos (0UL) /* WVALUE (Bit 0) */ -#define LINK_REG_USBVAL_WVALUE_Msk (0xffffUL) /* WVALUE (Bitfield-Mask: 0xffff) */ +#define RUSB2_USBVAL_WVALUE_Pos (0UL) /* WVALUE (Bit 0) */ +#define RUSB2_USBVAL_WVALUE_Msk (0xffffUL) /* WVALUE (Bitfield-Mask: 0xffff) */ // USBINDX -#define LINK_REG_USBINDX_WINDEX_Pos (0UL) /* WINDEX (Bit 0) */ -#define LINK_REG_USBINDX_WINDEX_Msk (0xffffUL) /* WINDEX (Bitfield-Mask: 0xffff) */ +#define RUSB2_USBINDX_WINDEX_Pos (0UL) /* WINDEX (Bit 0) */ +#define RUSB2_USBINDX_WINDEX_Msk (0xffffUL) /* WINDEX (Bitfield-Mask: 0xffff) */ // USBLENG -#define LINK_REG_USBLENG_WLENGTH_Pos (0UL) /* WLENGTH (Bit 0) */ -#define LINK_REG_USBLENG_WLENGTH_Msk (0xffffUL) /* WLENGTH (Bitfield-Mask: 0xffff) */ +#define RUSB2_USBLENG_WLENGTH_Pos (0UL) /* WLENGTH (Bit 0) */ +#define RUSB2_USBLENG_WLENGTH_Msk (0xffffUL) /* WLENGTH (Bitfield-Mask: 0xffff) */ // DCPCFG -#define LINK_REG_DCPCFG_CNTMD_Pos (8UL) /* CNTMD (Bit 8) */ -#define LINK_REG_DCPCFG_CNTMD_Msk (0x100UL) /* CNTMD (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCFG_SHTNAK_Pos (7UL) /* SHTNAK (Bit 7) */ -#define LINK_REG_DCPCFG_SHTNAK_Msk (0x80UL) /* SHTNAK (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCFG_DIR_Pos (4UL) /* DIR (Bit 4) */ -#define LINK_REG_DCPCFG_DIR_Msk (0x10UL) /* DIR (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCFG_CNTMD_Pos (8UL) /* CNTMD (Bit 8) */ +#define RUSB2_DCPCFG_CNTMD_Msk (0x100UL) /* CNTMD (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCFG_SHTNAK_Pos (7UL) /* SHTNAK (Bit 7) */ +#define RUSB2_DCPCFG_SHTNAK_Msk (0x80UL) /* SHTNAK (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCFG_DIR_Pos (4UL) /* DIR (Bit 4) */ +#define RUSB2_DCPCFG_DIR_Msk (0x10UL) /* DIR (Bitfield-Mask: 0x01) */ // DCPMAXP -#define LINK_REG_DCPMAXP_DEVSEL_Pos (12UL) /* DEVSEL (Bit 12) */ -#define LINK_REG_DCPMAXP_DEVSEL_Msk (0xf000UL) /* DEVSEL (Bitfield-Mask: 0x0f) */ -#define LINK_REG_DCPMAXP_MXPS_Pos (0UL) /* MXPS (Bit 0) */ -#define LINK_REG_DCPMAXP_MXPS_Msk (0x7fUL) /* MXPS (Bitfield-Mask: 0x7f) */ +#define RUSB2_DCPMAXP_DEVSEL_Pos (12UL) /* DEVSEL (Bit 12) */ +#define RUSB2_DCPMAXP_DEVSEL_Msk (0xf000UL) /* DEVSEL (Bitfield-Mask: 0x0f) */ +#define RUSB2_DCPMAXP_MXPS_Pos (0UL) /* MXPS (Bit 0) */ +#define RUSB2_DCPMAXP_MXPS_Msk (0x7fUL) /* MXPS (Bitfield-Mask: 0x7f) */ // DCPCTR -#define LINK_REG_DCPCTR_BSTS_Pos (15UL) /* BSTS (Bit 15) */ -#define LINK_REG_DCPCTR_BSTS_Msk (0x8000UL) /* BSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SUREQ_Pos (14UL) /* SUREQ (Bit 14) */ -#define LINK_REG_DCPCTR_SUREQ_Msk (0x4000UL) /* SUREQ (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SUREQCLR_Pos (11UL) /* SUREQCLR (Bit 11) */ -#define LINK_REG_DCPCTR_SUREQCLR_Msk (0x800UL) /* SUREQCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SQCLR_Pos (8UL) /* SQCLR (Bit 8) */ -#define LINK_REG_DCPCTR_SQCLR_Msk (0x100UL) /* SQCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SQSET_Pos (7UL) /* SQSET (Bit 7) */ -#define LINK_REG_DCPCTR_SQSET_Msk (0x80UL) /* SQSET (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SQMON_Pos (6UL) /* SQMON (Bit 6) */ -#define LINK_REG_DCPCTR_SQMON_Msk (0x40UL) /* SQMON (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_PBUSY_Pos (5UL) /* PBUSY (Bit 5) */ -#define LINK_REG_DCPCTR_PBUSY_Msk (0x20UL) /* PBUSY (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_CCPL_Pos (2UL) /* CCPL (Bit 2) */ -#define LINK_REG_DCPCTR_CCPL_Msk (0x4UL) /* CCPL (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_PID_Pos (0UL) /* PID (Bit 0) */ -#define LINK_REG_DCPCTR_PID_Msk (0x3UL) /* PID (Bitfield-Mask: 0x03) */ +#define RUSB2_DCPCTR_BSTS_Pos (15UL) /* BSTS (Bit 15) */ +#define RUSB2_DCPCTR_BSTS_Msk (0x8000UL) /* BSTS (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCTR_SUREQ_Pos (14UL) /* SUREQ (Bit 14) */ +#define RUSB2_DCPCTR_SUREQ_Msk (0x4000UL) /* SUREQ (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCTR_SUREQCLR_Pos (11UL) /* SUREQCLR (Bit 11) */ +#define RUSB2_DCPCTR_SUREQCLR_Msk (0x800UL) /* SUREQCLR (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCTR_SQCLR_Pos (8UL) /* SQCLR (Bit 8) */ +#define RUSB2_DCPCTR_SQCLR_Msk (0x100UL) /* SQCLR (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCTR_SQSET_Pos (7UL) /* SQSET (Bit 7) */ +#define RUSB2_DCPCTR_SQSET_Msk (0x80UL) /* SQSET (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCTR_SQMON_Pos (6UL) /* SQMON (Bit 6) */ +#define RUSB2_DCPCTR_SQMON_Msk (0x40UL) /* SQMON (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCTR_PBUSY_Pos (5UL) /* PBUSY (Bit 5) */ +#define RUSB2_DCPCTR_PBUSY_Msk (0x20UL) /* PBUSY (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCTR_CCPL_Pos (2UL) /* CCPL (Bit 2) */ +#define RUSB2_DCPCTR_CCPL_Msk (0x4UL) /* CCPL (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCTR_PID_Pos (0UL) /* PID (Bit 0) */ +#define RUSB2_DCPCTR_PID_Msk (0x3UL) /* PID (Bitfield-Mask: 0x03) */ // PIPESEL -#define LINK_REG_PIPESEL_PIPESEL_Pos (0UL) /* PIPESEL (Bit 0) */ -#define LINK_REG_PIPESEL_PIPESEL_Msk (0xfUL) /* PIPESEL (Bitfield-Mask: 0x0f) */ +#define RUSB2_PIPESEL_PIPESEL_Pos (0UL) /* PIPESEL (Bit 0) */ +#define RUSB2_PIPESEL_PIPESEL_Msk (0xfUL) /* PIPESEL (Bitfield-Mask: 0x0f) */ // PIPECFG -#define LINK_REG_PIPECFG_TYPE_Pos (14UL) /* TYPE (Bit 14) */ -#define LINK_REG_PIPECFG_TYPE_Msk (0xc000UL) /* TYPE (Bitfield-Mask: 0x03) */ -#define LINK_REG_PIPECFG_BFRE_Pos (10UL) /* BFRE (Bit 10) */ -#define LINK_REG_PIPECFG_BFRE_Msk (0x400UL) /* BFRE (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPECFG_DBLB_Pos (9UL) /* DBLB (Bit 9) */ -#define LINK_REG_PIPECFG_DBLB_Msk (0x200UL) /* DBLB (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPECFG_SHTNAK_Pos (7UL) /* SHTNAK (Bit 7) */ -#define LINK_REG_PIPECFG_SHTNAK_Msk (0x80UL) /* SHTNAK (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPECFG_DIR_Pos (4UL) /* DIR (Bit 4) */ -#define LINK_REG_PIPECFG_DIR_Msk (0x10UL) /* DIR (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPECFG_EPNUM_Pos (0UL) /* EPNUM (Bit 0) */ -#define LINK_REG_PIPECFG_EPNUM_Msk (0xfUL) /* EPNUM (Bitfield-Mask: 0x0f) */ +#define RUSB2_PIPECFG_TYPE_Pos (14UL) /* TYPE (Bit 14) */ +#define RUSB2_PIPECFG_TYPE_Msk (0xc000UL) /* TYPE (Bitfield-Mask: 0x03) */ +#define RUSB2_PIPECFG_BFRE_Pos (10UL) /* BFRE (Bit 10) */ +#define RUSB2_PIPECFG_BFRE_Msk (0x400UL) /* BFRE (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPECFG_DBLB_Pos (9UL) /* DBLB (Bit 9) */ +#define RUSB2_PIPECFG_DBLB_Msk (0x200UL) /* DBLB (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPECFG_SHTNAK_Pos (7UL) /* SHTNAK (Bit 7) */ +#define RUSB2_PIPECFG_SHTNAK_Msk (0x80UL) /* SHTNAK (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPECFG_DIR_Pos (4UL) /* DIR (Bit 4) */ +#define RUSB2_PIPECFG_DIR_Msk (0x10UL) /* DIR (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPECFG_EPNUM_Pos (0UL) /* EPNUM (Bit 0) */ +#define RUSB2_PIPECFG_EPNUM_Msk (0xfUL) /* EPNUM (Bitfield-Mask: 0x0f) */ // PIPEMAXP -#define LINK_REG_PIPEMAXP_DEVSEL_Pos (12UL) /* DEVSEL (Bit 12) */ -#define LINK_REG_PIPEMAXP_DEVSEL_Msk (0xf000UL) /* DEVSEL (Bitfield-Mask: 0x0f) */ -#define LINK_REG_PIPEMAXP_MXPS_Pos (0UL) /* MXPS (Bit 0) */ -#define LINK_REG_PIPEMAXP_MXPS_Msk (0x1ffUL) /* MXPS (Bitfield-Mask: 0x1ff) */ +#define RUSB2_PIPEMAXP_DEVSEL_Pos (12UL) /* DEVSEL (Bit 12) */ +#define RUSB2_PIPEMAXP_DEVSEL_Msk (0xf000UL) /* DEVSEL (Bitfield-Mask: 0x0f) */ +#define RUSB2_PIPEMAXP_MXPS_Pos (0UL) /* MXPS (Bit 0) */ +#define RUSB2_PIPEMAXP_MXPS_Msk (0x1ffUL) /* MXPS (Bitfield-Mask: 0x1ff) */ // PIPEPERI -#define LINK_REG_PIPEPERI_IFIS_Pos (12UL) /* IFIS (Bit 12) */ -#define LINK_REG_PIPEPERI_IFIS_Msk (0x1000UL) /* IFIS (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPEPERI_IITV_Pos (0UL) /* IITV (Bit 0) */ -#define LINK_REG_PIPEPERI_IITV_Msk (0x7UL) /* IITV (Bitfield-Mask: 0x07) */ +#define RUSB2_PIPEPERI_IFIS_Pos (12UL) /* IFIS (Bit 12) */ +#define RUSB2_PIPEPERI_IFIS_Msk (0x1000UL) /* IFIS (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPEPERI_IITV_Pos (0UL) /* IITV (Bit 0) */ +#define RUSB2_PIPEPERI_IITV_Msk (0x7UL) /* IITV (Bitfield-Mask: 0x07) */ // PIPE_CTR -#define LINK_REG_PIPE_CTR_BSTS_Pos (15UL) /* BSTS (Bit 15) */ -#define LINK_REG_PIPE_CTR_BSTS_Msk (0x8000UL) /* BSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_INBUFM_Pos (14UL) /* INBUFM (Bit 14) */ -#define LINK_REG_PIPE_CTR_INBUFM_Msk (0x4000UL) /* INBUFM (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_CSCLR_Pos (13UL) /* CSCLR (Bit 13) */ -#define LINK_REG_PIPE_CTR_CSCLR_Msk (0x2000UL) /* CSCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_CSSTS_Pos (12UL) /* CSSTS (Bit 12) */ -#define LINK_REG_PIPE_CTR_CSSTS_Msk (0x1000UL) /* CSSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_ATREPM_Pos (10UL) /* ATREPM (Bit 10) */ -#define LINK_REG_PIPE_CTR_ATREPM_Msk (0x400UL) /* ATREPM (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_ACLRM_Pos (9UL) /* ACLRM (Bit 9) */ -#define LINK_REG_PIPE_CTR_ACLRM_Msk (0x200UL) /* ACLRM (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_SQCLR_Pos (8UL) /* SQCLR (Bit 8) */ -#define LINK_REG_PIPE_CTR_SQCLR_Msk (0x100UL) /* SQCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_SQSET_Pos (7UL) /* SQSET (Bit 7) */ -#define LINK_REG_PIPE_CTR_SQSET_Msk (0x80UL) /* SQSET (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_SQMON_Pos (6UL) /* SQMON (Bit 6) */ -#define LINK_REG_PIPE_CTR_SQMON_Msk (0x40UL) /* SQMON (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_PBUSY_Pos (5UL) /* PBUSY (Bit 5) */ -#define LINK_REG_PIPE_CTR_PBUSY_Msk (0x20UL) /* PBUSY (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_PID_Pos (0UL) /* PID (Bit 0) */ -#define LINK_REG_PIPE_CTR_PID_Msk (0x3UL) /* PID (Bitfield-Mask: 0x03) */ +#define RUSB2_PIPE_CTR_BSTS_Pos (15UL) /* BSTS (Bit 15) */ +#define RUSB2_PIPE_CTR_BSTS_Msk (0x8000UL) /* BSTS (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_INBUFM_Pos (14UL) /* INBUFM (Bit 14) */ +#define RUSB2_PIPE_CTR_INBUFM_Msk (0x4000UL) /* INBUFM (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_CSCLR_Pos (13UL) /* CSCLR (Bit 13) */ +#define RUSB2_PIPE_CTR_CSCLR_Msk (0x2000UL) /* CSCLR (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_CSSTS_Pos (12UL) /* CSSTS (Bit 12) */ +#define RUSB2_PIPE_CTR_CSSTS_Msk (0x1000UL) /* CSSTS (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_ATREPM_Pos (10UL) /* ATREPM (Bit 10) */ +#define RUSB2_PIPE_CTR_ATREPM_Msk (0x400UL) /* ATREPM (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_ACLRM_Pos (9UL) /* ACLRM (Bit 9) */ +#define RUSB2_PIPE_CTR_ACLRM_Msk (0x200UL) /* ACLRM (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_SQCLR_Pos (8UL) /* SQCLR (Bit 8) */ +#define RUSB2_PIPE_CTR_SQCLR_Msk (0x100UL) /* SQCLR (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_SQSET_Pos (7UL) /* SQSET (Bit 7) */ +#define RUSB2_PIPE_CTR_SQSET_Msk (0x80UL) /* SQSET (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_SQMON_Pos (6UL) /* SQMON (Bit 6) */ +#define RUSB2_PIPE_CTR_SQMON_Msk (0x40UL) /* SQMON (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_PBUSY_Pos (5UL) /* PBUSY (Bit 5) */ +#define RUSB2_PIPE_CTR_PBUSY_Msk (0x20UL) /* PBUSY (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPE_CTR_PID_Pos (0UL) /* PID (Bit 0) */ +#define RUSB2_PIPE_CTR_PID_Msk (0x3UL) /* PID (Bitfield-Mask: 0x03) */ // DEVADD -#define LINK_REG_DEVADD_UPPHUB_Pos (11UL) /* UPPHUB (Bit 11) */ -#define LINK_REG_DEVADD_UPPHUB_Msk (0x7800UL) /* UPPHUB (Bitfield-Mask: 0x0f) */ -#define LINK_REG_DEVADD_HUBPORT_Pos (8UL) /* HUBPORT (Bit 8) */ -#define LINK_REG_DEVADD_HUBPORT_Msk (0x700UL) /* HUBPORT (Bitfield-Mask: 0x07) */ -#define LINK_REG_DEVADD_USBSPD_Pos (6UL) /* USBSPD (Bit 6) */ -#define LINK_REG_DEVADD_USBSPD_Msk (0xc0UL) /* USBSPD (Bitfield-Mask: 0x03) */ +#define RUSB2_DEVADD_UPPHUB_Pos (11UL) /* UPPHUB (Bit 11) */ +#define RUSB2_DEVADD_UPPHUB_Msk (0x7800UL) /* UPPHUB (Bitfield-Mask: 0x0f) */ +#define RUSB2_DEVADD_HUBPORT_Pos (8UL) /* HUBPORT (Bit 8) */ +#define RUSB2_DEVADD_HUBPORT_Msk (0x700UL) /* HUBPORT (Bitfield-Mask: 0x07) */ +#define RUSB2_DEVADD_USBSPD_Pos (6UL) /* USBSPD (Bit 6) */ +#define RUSB2_DEVADD_USBSPD_Msk (0xc0UL) /* USBSPD (Bitfield-Mask: 0x03) */ // USBBCCTRL0 -#define LINK_REG_USBBCCTRL0_PDDETSTS0_Pos (9UL) /* PDDETSTS0 (Bit 9) */ -#define LINK_REG_USBBCCTRL0_PDDETSTS0_Msk (0x200UL) /* PDDETSTS0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_CHGDETSTS0_Pos (8UL) /* CHGDETSTS0 (Bit 8) */ -#define LINK_REG_USBBCCTRL0_CHGDETSTS0_Msk (0x100UL) /* CHGDETSTS0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_BATCHGE0_Pos (7UL) /* BATCHGE0 (Bit 7) */ -#define LINK_REG_USBBCCTRL0_BATCHGE0_Msk (0x80UL) /* BATCHGE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_VDMSRCE0_Pos (5UL) /* VDMSRCE0 (Bit 5) */ -#define LINK_REG_USBBCCTRL0_VDMSRCE0_Msk (0x20UL) /* VDMSRCE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_IDPSINKE0_Pos (4UL) /* IDPSINKE0 (Bit 4) */ -#define LINK_REG_USBBCCTRL0_IDPSINKE0_Msk (0x10UL) /* IDPSINKE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_VDPSRCE0_Pos (3UL) /* VDPSRCE0 (Bit 3) */ -#define LINK_REG_USBBCCTRL0_VDPSRCE0_Msk (0x8UL) /* VDPSRCE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_IDMSINKE0_Pos (2UL) /* IDMSINKE0 (Bit 2) */ -#define LINK_REG_USBBCCTRL0_IDMSINKE0_Msk (0x4UL) /* IDMSINKE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_IDPSRCE0_Pos (1UL) /* IDPSRCE0 (Bit 1) */ -#define LINK_REG_USBBCCTRL0_IDPSRCE0_Msk (0x2UL) /* IDPSRCE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_RPDME0_Pos (0UL) /* RPDME0 (Bit 0) */ -#define LINK_REG_USBBCCTRL0_RPDME0_Msk (0x1UL) /* RPDME0 (Bitfield-Mask: 0x01) */ +#define RUSB2_USBBCCTRL0_PDDETSTS0_Pos (9UL) /* PDDETSTS0 (Bit 9) */ +#define RUSB2_USBBCCTRL0_PDDETSTS0_Msk (0x200UL) /* PDDETSTS0 (Bitfield-Mask: 0x01) */ +#define RUSB2_USBBCCTRL0_CHGDETSTS0_Pos (8UL) /* CHGDETSTS0 (Bit 8) */ +#define RUSB2_USBBCCTRL0_CHGDETSTS0_Msk (0x100UL) /* CHGDETSTS0 (Bitfield-Mask: 0x01) */ +#define RUSB2_USBBCCTRL0_BATCHGE0_Pos (7UL) /* BATCHGE0 (Bit 7) */ +#define RUSB2_USBBCCTRL0_BATCHGE0_Msk (0x80UL) /* BATCHGE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_USBBCCTRL0_VDMSRCE0_Pos (5UL) /* VDMSRCE0 (Bit 5) */ +#define RUSB2_USBBCCTRL0_VDMSRCE0_Msk (0x20UL) /* VDMSRCE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_USBBCCTRL0_IDPSINKE0_Pos (4UL) /* IDPSINKE0 (Bit 4) */ +#define RUSB2_USBBCCTRL0_IDPSINKE0_Msk (0x10UL) /* IDPSINKE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_USBBCCTRL0_VDPSRCE0_Pos (3UL) /* VDPSRCE0 (Bit 3) */ +#define RUSB2_USBBCCTRL0_VDPSRCE0_Msk (0x8UL) /* VDPSRCE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_USBBCCTRL0_IDMSINKE0_Pos (2UL) /* IDMSINKE0 (Bit 2) */ +#define RUSB2_USBBCCTRL0_IDMSINKE0_Msk (0x4UL) /* IDMSINKE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_USBBCCTRL0_IDPSRCE0_Pos (1UL) /* IDPSRCE0 (Bit 1) */ +#define RUSB2_USBBCCTRL0_IDPSRCE0_Msk (0x2UL) /* IDPSRCE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_USBBCCTRL0_RPDME0_Pos (0UL) /* RPDME0 (Bit 0) */ +#define RUSB2_USBBCCTRL0_RPDME0_Msk (0x1UL) /* RPDME0 (Bitfield-Mask: 0x01) */ // UCKSEL -#define LINK_REG_UCKSEL_UCKSELC_Pos (0UL) /* UCKSELC (Bit 0) */ -#define LINK_REG_UCKSEL_UCKSELC_Msk (0x1UL) /* UCKSELC (Bitfield-Mask: 0x01) */ +#define RUSB2_UCKSEL_UCKSELC_Pos (0UL) /* UCKSELC (Bit 0) */ +#define RUSB2_UCKSEL_UCKSELC_Msk (0x1UL) /* UCKSELC (Bitfield-Mask: 0x01) */ // USBMC -#define LINK_REG_USBMC_VDCEN_Pos (7UL) /* VDCEN (Bit 7) */ -#define LINK_REG_USBMC_VDCEN_Msk (0x80UL) /* VDCEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBMC_VDDUSBE_Pos (0UL) /* VDDUSBE (Bit 0) */ -#define LINK_REG_USBMC_VDDUSBE_Msk (0x1UL) /* VDDUSBE (Bitfield-Mask: 0x01) */ +#define RUSB2_USBMC_VDCEN_Pos (7UL) /* VDCEN (Bit 7) */ +#define RUSB2_USBMC_VDCEN_Msk (0x80UL) /* VDCEN (Bitfield-Mask: 0x01) */ +#define RUSB2_USBMC_VDDUSBE_Pos (0UL) /* VDDUSBE (Bit 0) */ +#define RUSB2_USBMC_VDDUSBE_Msk (0x1UL) /* VDDUSBE (Bitfield-Mask: 0x01) */ // PHYSLEW -#define LINK_REG_PHYSLEW_SLEWF01_Pos (3UL) /* SLEWF01 (Bit 3) */ -#define LINK_REG_PHYSLEW_SLEWF01_Msk (0x8UL) /* SLEWF01 (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSLEW_SLEWF00_Pos (2UL) /* SLEWF00 (Bit 2) */ -#define LINK_REG_PHYSLEW_SLEWF00_Msk (0x4UL) /* SLEWF00 (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSLEW_SLEWR01_Pos (1UL) /* SLEWR01 (Bit 1) */ -#define LINK_REG_PHYSLEW_SLEWR01_Msk (0x2UL) /* SLEWR01 (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSLEW_SLEWR00_Pos (0UL) /* SLEWR00 (Bit 0) */ -#define LINK_REG_PHYSLEW_SLEWR00_Msk (0x1UL) /* SLEWR00 (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYSLEW_SLEWF01_Pos (3UL) /* SLEWF01 (Bit 3) */ +#define RUSB2_PHYSLEW_SLEWF01_Msk (0x8UL) /* SLEWF01 (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYSLEW_SLEWF00_Pos (2UL) /* SLEWF00 (Bit 2) */ +#define RUSB2_PHYSLEW_SLEWF00_Msk (0x4UL) /* SLEWF00 (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYSLEW_SLEWR01_Pos (1UL) /* SLEWR01 (Bit 1) */ +#define RUSB2_PHYSLEW_SLEWR01_Msk (0x2UL) /* SLEWR01 (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYSLEW_SLEWR00_Pos (0UL) /* SLEWR00 (Bit 0) */ +#define RUSB2_PHYSLEW_SLEWR00_Msk (0x1UL) /* SLEWR00 (Bitfield-Mask: 0x01) */ // LPCTRL -#define LINK_REG_LPCTRL_HWUPM_Pos (7UL) /* HWUPM (Bit 7) */ -#define LINK_REG_LPCTRL_HWUPM_Msk (0x80UL) /* HWUPM (Bitfield-Mask: 0x01) */ +#define RUSB2_LPCTRL_HWUPM_Pos (7UL) /* HWUPM (Bit 7) */ +#define RUSB2_LPCTRL_HWUPM_Msk (0x80UL) /* HWUPM (Bitfield-Mask: 0x01) */ // LPSTS -#define LINK_REG_LPSTS_SUSPENDM_Pos (14UL) /* SUSPENDM (Bit 14) */ -#define LINK_REG_LPSTS_SUSPENDM_Msk (0x4000UL) /* SUSPENDM (Bitfield-Mask: 0x01) */ +#define RUSB2_LPSTS_SUSPENDM_Pos (14UL) /* SUSPENDM (Bit 14) */ +#define RUSB2_LPSTS_SUSPENDM_Msk (0x4000UL) /* SUSPENDM (Bitfield-Mask: 0x01) */ // BCCTRL -#define LINK_REG_BCCTRL_PDDETSTS_Pos (9UL) /* PDDETSTS (Bit 9) */ -#define LINK_REG_BCCTRL_PDDETSTS_Msk (0x200UL) /* PDDETSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_CHGDETSTS_Pos (8UL) /* CHGDETSTS (Bit 8) */ -#define LINK_REG_BCCTRL_CHGDETSTS_Msk (0x100UL) /* CHGDETSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_DCPMODE_Pos (5UL) /* DCPMODE (Bit 5) */ -#define LINK_REG_BCCTRL_DCPMODE_Msk (0x20UL) /* DCPMODE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_VDMSRCE_Pos (4UL) /* VDMSRCE (Bit 4) */ -#define LINK_REG_BCCTRL_VDMSRCE_Msk (0x10UL) /* VDMSRCE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_IDPSINKE_Pos (3UL) /* IDPSINKE (Bit 3) */ -#define LINK_REG_BCCTRL_IDPSINKE_Msk (0x8UL) /* IDPSINKE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_VDPSRCE_Pos (2UL) /* VDPSRCE (Bit 2) */ -#define LINK_REG_BCCTRL_VDPSRCE_Msk (0x4UL) /* VDPSRCE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_IDMSINKE_Pos (1UL) /* IDMSINKE (Bit 1) */ -#define LINK_REG_BCCTRL_IDMSINKE_Msk (0x2UL) /* IDMSINKE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_IDPSRCE_Pos (0UL) /* IDPSRCE (Bit 0) */ -#define LINK_REG_BCCTRL_IDPSRCE_Msk (0x1UL) /* IDPSRCE (Bitfield-Mask: 0x01) */ +#define RUSB2_BCCTRL_PDDETSTS_Pos (9UL) /* PDDETSTS (Bit 9) */ +#define RUSB2_BCCTRL_PDDETSTS_Msk (0x200UL) /* PDDETSTS (Bitfield-Mask: 0x01) */ +#define RUSB2_BCCTRL_CHGDETSTS_Pos (8UL) /* CHGDETSTS (Bit 8) */ +#define RUSB2_BCCTRL_CHGDETSTS_Msk (0x100UL) /* CHGDETSTS (Bitfield-Mask: 0x01) */ +#define RUSB2_BCCTRL_DCPMODE_Pos (5UL) /* DCPMODE (Bit 5) */ +#define RUSB2_BCCTRL_DCPMODE_Msk (0x20UL) /* DCPMODE (Bitfield-Mask: 0x01) */ +#define RUSB2_BCCTRL_VDMSRCE_Pos (4UL) /* VDMSRCE (Bit 4) */ +#define RUSB2_BCCTRL_VDMSRCE_Msk (0x10UL) /* VDMSRCE (Bitfield-Mask: 0x01) */ +#define RUSB2_BCCTRL_IDPSINKE_Pos (3UL) /* IDPSINKE (Bit 3) */ +#define RUSB2_BCCTRL_IDPSINKE_Msk (0x8UL) /* IDPSINKE (Bitfield-Mask: 0x01) */ +#define RUSB2_BCCTRL_VDPSRCE_Pos (2UL) /* VDPSRCE (Bit 2) */ +#define RUSB2_BCCTRL_VDPSRCE_Msk (0x4UL) /* VDPSRCE (Bitfield-Mask: 0x01) */ +#define RUSB2_BCCTRL_IDMSINKE_Pos (1UL) /* IDMSINKE (Bit 1) */ +#define RUSB2_BCCTRL_IDMSINKE_Msk (0x2UL) /* IDMSINKE (Bitfield-Mask: 0x01) */ +#define RUSB2_BCCTRL_IDPSRCE_Pos (0UL) /* IDPSRCE (Bit 0) */ +#define RUSB2_BCCTRL_IDPSRCE_Msk (0x1UL) /* IDPSRCE (Bitfield-Mask: 0x01) */ // PL1CTRL1 -#define LINK_REG_PL1CTRL1_L1EXTMD_Pos (14UL) /* L1EXTMD (Bit 14) */ -#define LINK_REG_PL1CTRL1_L1EXTMD_Msk (0x4000UL) /* L1EXTMD (Bitfield-Mask: 0x01) */ -#define LINK_REG_PL1CTRL1_HIRDTHR_Pos (8UL) /* HIRDTHR (Bit 8) */ -#define LINK_REG_PL1CTRL1_HIRDTHR_Msk (0xf00UL) /* HIRDTHR (Bitfield-Mask: 0x0f) */ -#define LINK_REG_PL1CTRL1_DVSQ_Pos (4UL) /* DVSQ (Bit 4) */ -#define LINK_REG_PL1CTRL1_DVSQ_Msk (0xf0UL) /* DVSQ (Bitfield-Mask: 0x0f) */ -#define LINK_REG_PL1CTRL1_L1NEGOMD_Pos (3UL) /* L1NEGOMD (Bit 3) */ -#define LINK_REG_PL1CTRL1_L1NEGOMD_Msk (0x8UL) /* L1NEGOMD (Bitfield-Mask: 0x01) */ -#define LINK_REG_PL1CTRL1_L1RESPMD_Pos (1UL) /* L1RESPMD (Bit 1) */ -#define LINK_REG_PL1CTRL1_L1RESPMD_Msk (0x6UL) /* L1RESPMD (Bitfield-Mask: 0x03) */ -#define LINK_REG_PL1CTRL1_L1RESPEN_Pos (0UL) /* L1RESPEN (Bit 0) */ -#define LINK_REG_PL1CTRL1_L1RESPEN_Msk (0x1UL) /* L1RESPEN (Bitfield-Mask: 0x01) */ +#define RUSB2_PL1CTRL1_L1EXTMD_Pos (14UL) /* L1EXTMD (Bit 14) */ +#define RUSB2_PL1CTRL1_L1EXTMD_Msk (0x4000UL) /* L1EXTMD (Bitfield-Mask: 0x01) */ +#define RUSB2_PL1CTRL1_HIRDTHR_Pos (8UL) /* HIRDTHR (Bit 8) */ +#define RUSB2_PL1CTRL1_HIRDTHR_Msk (0xf00UL) /* HIRDTHR (Bitfield-Mask: 0x0f) */ +#define RUSB2_PL1CTRL1_DVSQ_Pos (4UL) /* DVSQ (Bit 4) */ +#define RUSB2_PL1CTRL1_DVSQ_Msk (0xf0UL) /* DVSQ (Bitfield-Mask: 0x0f) */ +#define RUSB2_PL1CTRL1_L1NEGOMD_Pos (3UL) /* L1NEGOMD (Bit 3) */ +#define RUSB2_PL1CTRL1_L1NEGOMD_Msk (0x8UL) /* L1NEGOMD (Bitfield-Mask: 0x01) */ +#define RUSB2_PL1CTRL1_L1RESPMD_Pos (1UL) /* L1RESPMD (Bit 1) */ +#define RUSB2_PL1CTRL1_L1RESPMD_Msk (0x6UL) /* L1RESPMD (Bitfield-Mask: 0x03) */ +#define RUSB2_PL1CTRL1_L1RESPEN_Pos (0UL) /* L1RESPEN (Bit 0) */ +#define RUSB2_PL1CTRL1_L1RESPEN_Msk (0x1UL) /* L1RESPEN (Bitfield-Mask: 0x01) */ // PL1CTRL2 -#define LINK_REG_PL1CTRL2_RWEMON_Pos (12UL) /* RWEMON (Bit 12) */ -#define LINK_REG_PL1CTRL2_RWEMON_Msk (0x1000UL) /* RWEMON (Bitfield-Mask: 0x01) */ -#define LINK_REG_PL1CTRL2_HIRDMON_Pos (8UL) /* HIRDMON (Bit 8) */ -#define LINK_REG_PL1CTRL2_HIRDMON_Msk (0xf00UL) /* HIRDMON (Bitfield-Mask: 0x0f) */ +#define RUSB2_PL1CTRL2_RWEMON_Pos (12UL) /* RWEMON (Bit 12) */ +#define RUSB2_PL1CTRL2_RWEMON_Msk (0x1000UL) /* RWEMON (Bitfield-Mask: 0x01) */ +#define RUSB2_PL1CTRL2_HIRDMON_Pos (8UL) /* HIRDMON (Bit 8) */ +#define RUSB2_PL1CTRL2_HIRDMON_Msk (0xf00UL) /* HIRDMON (Bitfield-Mask: 0x0f) */ // HL1CTRL1 -#define LINK_REG_HL1CTRL1_L1STATUS_Pos (1UL) /* L1STATUS (Bit 1) */ -#define LINK_REG_HL1CTRL1_L1STATUS_Msk (0x6UL) /* L1STATUS (Bitfield-Mask: 0x03) */ -#define LINK_REG_HL1CTRL1_L1REQ_Pos (0UL) /* L1REQ (Bit 0) */ -#define LINK_REG_HL1CTRL1_L1REQ_Msk (0x1UL) /* L1REQ (Bitfield-Mask: 0x01) */ +#define RUSB2_HL1CTRL1_L1STATUS_Pos (1UL) /* L1STATUS (Bit 1) */ +#define RUSB2_HL1CTRL1_L1STATUS_Msk (0x6UL) /* L1STATUS (Bitfield-Mask: 0x03) */ +#define RUSB2_HL1CTRL1_L1REQ_Pos (0UL) /* L1REQ (Bit 0) */ +#define RUSB2_HL1CTRL1_L1REQ_Msk (0x1UL) /* L1REQ (Bitfield-Mask: 0x01) */ // HL1CTRL2 -#define LINK_REG_HL1CTRL2_BESL_Pos (15UL) /* BESL (Bit 15) */ -#define LINK_REG_HL1CTRL2_BESL_Msk (0x8000UL) /* BESL (Bitfield-Mask: 0x01) */ -#define LINK_REG_HL1CTRL2_L1RWE_Pos (12UL) /* L1RWE (Bit 12) */ -#define LINK_REG_HL1CTRL2_L1RWE_Msk (0x1000UL) /* L1RWE (Bitfield-Mask: 0x01) */ -#define LINK_REG_HL1CTRL2_HIRD_Pos (8UL) /* HIRD (Bit 8) */ -#define LINK_REG_HL1CTRL2_HIRD_Msk (0xf00UL) /* HIRD (Bitfield-Mask: 0x0f) */ -#define LINK_REG_HL1CTRL2_L1ADDR_Pos (0UL) /* L1ADDR (Bit 0) */ -#define LINK_REG_HL1CTRL2_L1ADDR_Msk (0xfUL) /* L1ADDR (Bitfield-Mask: 0x0f) */ +#define RUSB2_HL1CTRL2_BESL_Pos (15UL) /* BESL (Bit 15) */ +#define RUSB2_HL1CTRL2_BESL_Msk (0x8000UL) /* BESL (Bitfield-Mask: 0x01) */ +#define RUSB2_HL1CTRL2_L1RWE_Pos (12UL) /* L1RWE (Bit 12) */ +#define RUSB2_HL1CTRL2_L1RWE_Msk (0x1000UL) /* L1RWE (Bitfield-Mask: 0x01) */ +#define RUSB2_HL1CTRL2_HIRD_Pos (8UL) /* HIRD (Bit 8) */ +#define RUSB2_HL1CTRL2_HIRD_Msk (0xf00UL) /* HIRD (Bitfield-Mask: 0x0f) */ +#define RUSB2_HL1CTRL2_L1ADDR_Pos (0UL) /* L1ADDR (Bit 0) */ +#define RUSB2_HL1CTRL2_L1ADDR_Msk (0xfUL) /* L1ADDR (Bitfield-Mask: 0x0f) */ // DPUSR0R -#define LINK_REG_DPUSR0R_DVBSTSHM_Pos (23UL) /* DVBSTSHM (Bit 23) */ -#define LINK_REG_DPUSR0R_DVBSTSHM_Msk (0x800000UL) /* DVBSTSHM (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_DOVCBHM_Pos (21UL) /* DOVCBHM (Bit 21) */ -#define LINK_REG_DPUSR0R_DOVCBHM_Msk (0x200000UL) /* DOVCBHM (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_DOVCAHM_Pos (20UL) /* DOVCAHM (Bit 20) */ -#define LINK_REG_DPUSR0R_DOVCAHM_Msk (0x100000UL) /* DOVCAHM (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_DVBSTSHM_Pos (23UL) /* DVBSTSHM (Bit 23) */ +#define RUSB2_DPUSR0R_DVBSTSHM_Msk (0x800000UL) /* DVBSTSHM (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_DOVCBHM_Pos (21UL) /* DOVCBHM (Bit 21) */ +#define RUSB2_DPUSR0R_DOVCBHM_Msk (0x200000UL) /* DOVCBHM (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_DOVCAHM_Pos (20UL) /* DOVCAHM (Bit 20) */ +#define RUSB2_DPUSR0R_DOVCAHM_Msk (0x100000UL) /* DOVCAHM (Bitfield-Mask: 0x01) */ // DPUSR1R -#define LINK_REG_DPUSR1R_DVBSTSH_Pos (23UL) /* DVBSTSH (Bit 23) */ -#define LINK_REG_DPUSR1R_DVBSTSH_Msk (0x800000UL) /* DVBSTSH (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DOVCBH_Pos (21UL) /* DOVCBH (Bit 21) */ -#define LINK_REG_DPUSR1R_DOVCBH_Msk (0x200000UL) /* DOVCBH (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DOVCAH_Pos (20UL) /* DOVCAH (Bit 20) */ -#define LINK_REG_DPUSR1R_DOVCAH_Msk (0x100000UL) /* DOVCAH (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DVBSTSHE_Pos (7UL) /* DVBSTSHE (Bit 7) */ -#define LINK_REG_DPUSR1R_DVBSTSHE_Msk (0x80UL) /* DVBSTSHE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DOVCBHE_Pos (5UL) /* DOVCBHE (Bit 5) */ -#define LINK_REG_DPUSR1R_DOVCBHE_Msk (0x20UL) /* DOVCBHE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DOVCAHE_Pos (4UL) /* DOVCAHE (Bit 4) */ -#define LINK_REG_DPUSR1R_DOVCAHE_Msk (0x10UL) /* DOVCAHE (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_DVBSTSH_Pos (23UL) /* DVBSTSH (Bit 23) */ +#define RUSB2_DPUSR1R_DVBSTSH_Msk (0x800000UL) /* DVBSTSH (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_DOVCBH_Pos (21UL) /* DOVCBH (Bit 21) */ +#define RUSB2_DPUSR1R_DOVCBH_Msk (0x200000UL) /* DOVCBH (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_DOVCAH_Pos (20UL) /* DOVCAH (Bit 20) */ +#define RUSB2_DPUSR1R_DOVCAH_Msk (0x100000UL) /* DOVCAH (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_DVBSTSHE_Pos (7UL) /* DVBSTSHE (Bit 7) */ +#define RUSB2_DPUSR1R_DVBSTSHE_Msk (0x80UL) /* DVBSTSHE (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_DOVCBHE_Pos (5UL) /* DOVCBHE (Bit 5) */ +#define RUSB2_DPUSR1R_DOVCBHE_Msk (0x20UL) /* DOVCBHE (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_DOVCAHE_Pos (4UL) /* DOVCAHE (Bit 4) */ +#define RUSB2_DPUSR1R_DOVCAHE_Msk (0x10UL) /* DOVCAHE (Bitfield-Mask: 0x01) */ // DPUSR2R -#define LINK_REG_DPUSR2R_DMINTE_Pos (9UL) /* DMINTE (Bit 9) */ -#define LINK_REG_DPUSR2R_DMINTE_Msk (0x200UL) /* DMINTE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DPINTE_Pos (8UL) /* DPINTE (Bit 8) */ -#define LINK_REG_DPUSR2R_DPINTE_Msk (0x100UL) /* DPINTE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DMVAL_Pos (5UL) /* DMVAL (Bit 5) */ -#define LINK_REG_DPUSR2R_DMVAL_Msk (0x20UL) /* DMVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DPVAL_Pos (4UL) /* DPVAL (Bit 4) */ -#define LINK_REG_DPUSR2R_DPVAL_Msk (0x10UL) /* DPVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DMINT_Pos (1UL) /* DMINT (Bit 1) */ -#define LINK_REG_DPUSR2R_DMINT_Msk (0x2UL) /* DMINT (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DPINT_Pos (0UL) /* DPINT (Bit 0) */ -#define LINK_REG_DPUSR2R_DPINT_Msk (0x1UL) /* DPINT (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR2R_DMINTE_Pos (9UL) /* DMINTE (Bit 9) */ +#define RUSB2_DPUSR2R_DMINTE_Msk (0x200UL) /* DMINTE (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR2R_DPINTE_Pos (8UL) /* DPINTE (Bit 8) */ +#define RUSB2_DPUSR2R_DPINTE_Msk (0x100UL) /* DPINTE (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR2R_DMVAL_Pos (5UL) /* DMVAL (Bit 5) */ +#define RUSB2_DPUSR2R_DMVAL_Msk (0x20UL) /* DMVAL (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR2R_DPVAL_Pos (4UL) /* DPVAL (Bit 4) */ +#define RUSB2_DPUSR2R_DPVAL_Msk (0x10UL) /* DPVAL (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR2R_DMINT_Pos (1UL) /* DMINT (Bit 1) */ +#define RUSB2_DPUSR2R_DMINT_Msk (0x2UL) /* DMINT (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR2R_DPINT_Pos (0UL) /* DPINT (Bit 0) */ +#define RUSB2_DPUSR2R_DPINT_Msk (0x1UL) /* DPINT (Bitfield-Mask: 0x01) */ // DPUSRCR -#define LINK_REG_DPUSRCR_FIXPHYPD_Pos (1UL) /* FIXPHYPD (Bit 1) */ -#define LINK_REG_DPUSRCR_FIXPHYPD_Msk (0x2UL) /* FIXPHYPD (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSRCR_FIXPHY_Pos (0UL) /* FIXPHY (Bit 0) */ -#define LINK_REG_DPUSRCR_FIXPHY_Msk (0x1UL) /* FIXPHY (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSRCR_FIXPHYPD_Pos (1UL) /* FIXPHYPD (Bit 1) */ +#define RUSB2_DPUSRCR_FIXPHYPD_Msk (0x2UL) /* FIXPHYPD (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSRCR_FIXPHY_Pos (0UL) /* FIXPHY (Bit 0) */ +#define RUSB2_DPUSRCR_FIXPHY_Msk (0x1UL) /* FIXPHY (Bitfield-Mask: 0x01) */ // DPUSR0R_FS -#define LINK_REG_DPUSR0R_FS_DVBSTS0_Pos (23UL) /* DVBSTS0 (Bit 23) */ -#define LINK_REG_DPUSR0R_FS_DVBSTS0_Msk (0x800000UL) /* DVBSTS0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DOVCB0_Pos (21UL) /* DOVCB0 (Bit 21) */ -#define LINK_REG_DPUSR0R_FS_DOVCB0_Msk (0x200000UL) /* DOVCB0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DOVCA0_Pos (20UL) /* DOVCA0 (Bit 20) */ -#define LINK_REG_DPUSR0R_FS_DOVCA0_Msk (0x100000UL) /* DOVCA0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DM0_Pos (17UL) /* DM0 (Bit 17) */ -#define LINK_REG_DPUSR0R_FS_DM0_Msk (0x20000UL) /* DM0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DP0_Pos (16UL) /* DP0 (Bit 16) */ -#define LINK_REG_DPUSR0R_FS_DP0_Msk (0x10000UL) /* DP0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_FIXPHY0_Pos (4UL) /* FIXPHY0 (Bit 4) */ -#define LINK_REG_DPUSR0R_FS_FIXPHY0_Msk (0x10UL) /* FIXPHY0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DRPD0_Pos (3UL) /* DRPD0 (Bit 3) */ -#define LINK_REG_DPUSR0R_FS_DRPD0_Msk (0x8UL) /* DRPD0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_RPUE0_Pos (1UL) /* RPUE0 (Bit 1) */ -#define LINK_REG_DPUSR0R_FS_RPUE0_Msk (0x2UL) /* RPUE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_SRPC0_Pos (0UL) /* SRPC0 (Bit 0) */ -#define LINK_REG_DPUSR0R_FS_SRPC0_Msk (0x1UL) /* SRPC0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_FS_DVBSTS0_Pos (23UL) /* DVBSTS0 (Bit 23) */ +#define RUSB2_DPUSR0R_FS_DVBSTS0_Msk (0x800000UL) /* DVBSTS0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_FS_DOVCB0_Pos (21UL) /* DOVCB0 (Bit 21) */ +#define RUSB2_DPUSR0R_FS_DOVCB0_Msk (0x200000UL) /* DOVCB0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_FS_DOVCA0_Pos (20UL) /* DOVCA0 (Bit 20) */ +#define RUSB2_DPUSR0R_FS_DOVCA0_Msk (0x100000UL) /* DOVCA0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_FS_DM0_Pos (17UL) /* DM0 (Bit 17) */ +#define RUSB2_DPUSR0R_FS_DM0_Msk (0x20000UL) /* DM0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_FS_DP0_Pos (16UL) /* DP0 (Bit 16) */ +#define RUSB2_DPUSR0R_FS_DP0_Msk (0x10000UL) /* DP0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_FS_FIXPHY0_Pos (4UL) /* FIXPHY0 (Bit 4) */ +#define RUSB2_DPUSR0R_FS_FIXPHY0_Msk (0x10UL) /* FIXPHY0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_FS_DRPD0_Pos (3UL) /* DRPD0 (Bit 3) */ +#define RUSB2_DPUSR0R_FS_DRPD0_Msk (0x8UL) /* DRPD0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_FS_RPUE0_Pos (1UL) /* RPUE0 (Bit 1) */ +#define RUSB2_DPUSR0R_FS_RPUE0_Msk (0x2UL) /* RPUE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR0R_FS_SRPC0_Pos (0UL) /* SRPC0 (Bit 0) */ +#define RUSB2_DPUSR0R_FS_SRPC0_Msk (0x1UL) /* SRPC0 (Bitfield-Mask: 0x01) */ // DPUSR1R_FS -#define LINK_REG_DPUSR1R_FS_DVBINT0_Pos (23UL) /* DVBINT0 (Bit 23) */ -#define LINK_REG_DPUSR1R_FS_DVBINT0_Msk (0x800000UL) /* DVBINT0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRB0_Pos (21UL) /* DOVRCRB0 (Bit 21) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRB0_Msk (0x200000UL) /* DOVRCRB0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRA0_Pos (20UL) /* DOVRCRA0 (Bit 20) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRA0_Msk (0x100000UL) /* DOVRCRA0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DMINT0_Pos (17UL) /* DMINT0 (Bit 17) */ -#define LINK_REG_DPUSR1R_FS_DMINT0_Msk (0x20000UL) /* DMINT0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DPINT0_Pos (16UL) /* DPINT0 (Bit 16) */ -#define LINK_REG_DPUSR1R_FS_DPINT0_Msk (0x10000UL) /* DPINT0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DVBSE0_Pos (7UL) /* DVBSE0 (Bit 7) */ -#define LINK_REG_DPUSR1R_FS_DVBSE0_Msk (0x80UL) /* DVBSE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRBE0_Pos (5UL) /* DOVRCRBE0 (Bit 5) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRBE0_Msk (0x20UL) /* DOVRCRBE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRAE0_Pos (4UL) /* DOVRCRAE0 (Bit 4) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRAE0_Msk (0x10UL) /* DOVRCRAE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DMINTE0_Pos (1UL) /* DMINTE0 (Bit 1) */ -#define LINK_REG_DPUSR1R_FS_DMINTE0_Msk (0x2UL) /* DMINTE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DPINTE0_Pos (0UL) /* DPINTE0 (Bit 0) */ -#define LINK_REG_DPUSR1R_FS_DPINTE0_Msk (0x1UL) /* DPINTE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DVBINT0_Pos (23UL) /* DVBINT0 (Bit 23) */ +#define RUSB2_DPUSR1R_FS_DVBINT0_Msk (0x800000UL) /* DVBINT0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DOVRCRB0_Pos (21UL) /* DOVRCRB0 (Bit 21) */ +#define RUSB2_DPUSR1R_FS_DOVRCRB0_Msk (0x200000UL) /* DOVRCRB0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DOVRCRA0_Pos (20UL) /* DOVRCRA0 (Bit 20) */ +#define RUSB2_DPUSR1R_FS_DOVRCRA0_Msk (0x100000UL) /* DOVRCRA0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DMINT0_Pos (17UL) /* DMINT0 (Bit 17) */ +#define RUSB2_DPUSR1R_FS_DMINT0_Msk (0x20000UL) /* DMINT0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DPINT0_Pos (16UL) /* DPINT0 (Bit 16) */ +#define RUSB2_DPUSR1R_FS_DPINT0_Msk (0x10000UL) /* DPINT0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DVBSE0_Pos (7UL) /* DVBSE0 (Bit 7) */ +#define RUSB2_DPUSR1R_FS_DVBSE0_Msk (0x80UL) /* DVBSE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DOVRCRBE0_Pos (5UL) /* DOVRCRBE0 (Bit 5) */ +#define RUSB2_DPUSR1R_FS_DOVRCRBE0_Msk (0x20UL) /* DOVRCRBE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DOVRCRAE0_Pos (4UL) /* DOVRCRAE0 (Bit 4) */ +#define RUSB2_DPUSR1R_FS_DOVRCRAE0_Msk (0x10UL) /* DOVRCRAE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DMINTE0_Pos (1UL) /* DMINTE0 (Bit 1) */ +#define RUSB2_DPUSR1R_FS_DMINTE0_Msk (0x2UL) /* DMINTE0 (Bitfield-Mask: 0x01) */ +#define RUSB2_DPUSR1R_FS_DPINTE0_Pos (0UL) /* DPINTE0 (Bit 0) */ +#define RUSB2_DPUSR1R_FS_DPINTE0_Msk (0x1UL) /* DPINTE0 (Bitfield-Mask: 0x01) */ /*--------------------------------------------------------------------*/ /* Register Bit Utils */ /*--------------------------------------------------------------------*/ -#define LINK_REG_PIPE_CTR_PID_NAK (0U << LINK_REG_PIPE_CTR_PID_Pos) /* NAK response */ -#define LINK_REG_PIPE_CTR_PID_BUF (1U << LINK_REG_PIPE_CTR_PID_Pos) /* BUF response (depends buffer state) */ -#define LINK_REG_PIPE_CTR_PID_STALL (2U << LINK_REG_PIPE_CTR_PID_Pos) /* STALL response */ +#define RUSB2_PIPE_CTR_PID_NAK (0U << RUSB2_PIPE_CTR_PID_Pos) /* NAK response */ +#define RUSB2_PIPE_CTR_PID_BUF (1U << RUSB2_PIPE_CTR_PID_Pos) /* BUF response (depends buffer state) */ +#define RUSB2_PIPE_CTR_PID_STALL (2U << RUSB2_PIPE_CTR_PID_Pos) /* STALL response */ -#define LINK_REG_DVSTCTR0_RHST_LS (1U << LINK_REG_DVSTCTR0_RHST_Pos) /* Low-speed connection */ -#define LINK_REG_DVSTCTR0_RHST_FS (2U << LINK_REG_DVSTCTR0_RHST_Pos) /* Full-speed connection */ +#define RUSB2_DVSTCTR0_RHST_LS (1U << RUSB2_DVSTCTR0_RHST_Pos) /* Low-speed connection */ +#define RUSB2_DVSTCTR0_RHST_FS (2U << RUSB2_DVSTCTR0_RHST_Pos) /* Full-speed connection */ -#define LINK_REG_DEVADD_USBSPD_LS (1U << LINK_REG_DEVADD_USBSPD_Pos) /* Target Device Low-speed */ -#define LINK_REG_DEVADD_USBSPD_FS (2U << LINK_REG_DEVADD_USBSPD_Pos) /* Target Device Full-speed */ +#define RUSB2_DEVADD_USBSPD_LS (1U << RUSB2_DEVADD_USBSPD_Pos) /* Target Device Low-speed */ +#define RUSB2_DEVADD_USBSPD_FS (2U << RUSB2_DEVADD_USBSPD_Pos) /* Target Device Full-speed */ -#define LINK_REG_CFIFOSEL_ISEL_WRITE (1U << LINK_REG_CFIFOSEL_ISEL_Pos) /* FIFO write AKA TX*/ +#define RUSB2_CFIFOSEL_ISEL_WRITE (1U << RUSB2_CFIFOSEL_ISEL_Pos) /* FIFO write AKA TX*/ -#define LINK_REG_FIFOSEL_BIGEND (1U << LINK_REG_CFIFOSEL_BIGEND_Pos) /* FIFO Big Endian */ -#define LINK_REG_FIFOSEL_MBW_8BIT (0U << LINK_REG_CFIFOSEL_MBW_Pos) /* 8-bit width */ -#define LINK_REG_FIFOSEL_MBW_16BIT (1U << LINK_REG_CFIFOSEL_MBW_Pos) /* 16-bit width */ +#define RUSB2_FIFOSEL_BIGEND (1U << RUSB2_CFIFOSEL_BIGEND_Pos) /* FIFO Big Endian */ +#define RUSB2_FIFOSEL_MBW_8BIT (0U << RUSB2_CFIFOSEL_MBW_Pos) /* 8-bit width */ +#define RUSB2_FIFOSEL_MBW_16BIT (1U << RUSB2_CFIFOSEL_MBW_Pos) /* 16-bit width */ -#define LINK_REG_INTSTS0_CTSQ_CTRL_RDATA (1U << LINK_REG_INTSTS0_CTSQ_Pos) +#define RUSB2_INTSTS0_CTSQ_CTRL_RDATA (1U << RUSB2_INTSTS0_CTSQ_Pos) -#define LINK_REG_INTSTS0_DVSQ_STATE_DEF (1U << LINK_REG_INTSTS0_DVSQ_Pos) /* Default state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_ADDR (2U << LINK_REG_INTSTS0_DVSQ_Pos) /* Address state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP0 (4U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP1 (5U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP2 (6U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP3 (7U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ +#define RUSB2_INTSTS0_DVSQ_STATE_DEF (1U << RUSB2_INTSTS0_DVSQ_Pos) /* Default state */ +#define RUSB2_INTSTS0_DVSQ_STATE_ADDR (2U << RUSB2_INTSTS0_DVSQ_Pos) /* Address state */ +#define RUSB2_INTSTS0_DVSQ_STATE_SUSP0 (4U << RUSB2_INTSTS0_DVSQ_Pos) /* Suspend state */ +#define RUSB2_INTSTS0_DVSQ_STATE_SUSP1 (5U << RUSB2_INTSTS0_DVSQ_Pos) /* Suspend state */ +#define RUSB2_INTSTS0_DVSQ_STATE_SUSP2 (6U << RUSB2_INTSTS0_DVSQ_Pos) /* Suspend state */ +#define RUSB2_INTSTS0_DVSQ_STATE_SUSP3 (7U << RUSB2_INTSTS0_DVSQ_Pos) /* Suspend state */ -#define LINK_REG_PIPECFG_TYPE_BULK (1U << LINK_REG_PIPECFG_TYPE_Pos) -#define LINK_REG_PIPECFG_TYPE_INT (2U << LINK_REG_PIPECFG_TYPE_Pos) -#define LINK_REG_PIPECFG_TYPE_ISO (3U << LINK_REG_PIPECFG_TYPE_Pos) +#define RUSB2_PIPECFG_TYPE_BULK (1U << RUSB2_PIPECFG_TYPE_Pos) +#define RUSB2_PIPECFG_TYPE_INT (2U << RUSB2_PIPECFG_TYPE_Pos) +#define RUSB2_PIPECFG_TYPE_ISO (3U << RUSB2_PIPECFG_TYPE_Pos) //--------------------------------------------------------------------+ // Static Assert //--------------------------------------------------------------------+ -TU_VERIFY_STATIC(sizeof(LINK_REG_PIPE_TR_t) == 4, "incorrect size"); - -TU_VERIFY_STATIC(offsetof(LINK_REG_t, SYSCFG ) == 0x00000000, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BUSWAIT ) == 0x00000002, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, SYSSTS0 ) == 0x00000004, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PLLSTA ) == 0x00000006, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DVSTCTR0 ) == 0x00000008, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, TESTMODE ) == 0x0000000C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, CFIFO ) == 0x00000014, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D0FIFO ) == 0x00000018, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D1FIFO ) == 0x0000001C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, CFIFOSEL ) == 0x00000020, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, CFIFOCTR ) == 0x00000022, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D0FIFOSEL ) == 0x00000028, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D0FIFOCTR ) == 0x0000002A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D1FIFOSEL ) == 0x0000002C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D1FIFOCTR ) == 0x0000002E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTENB0 ) == 0x00000030, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTENB1 ) == 0x00000032, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BRDYENB ) == 0x00000036, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, NRDYENB ) == 0x00000038, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BEMPENB ) == 0x0000003A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, SOFCFG ) == 0x0000003C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PHYSET ) == 0x0000003E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTSTS0 ) == 0x00000040, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTSTS1 ) == 0x00000042, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BRDYSTS ) == 0x00000046, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, NRDYSTS ) == 0x00000048, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BEMPSTS ) == 0x0000004A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, FRMNUM ) == 0x0000004C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, UFRMNUM ) == 0x0000004E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBADDR ) == 0x00000050, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBREQ ) == 0x00000054, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBVAL ) == 0x00000056, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBINDX ) == 0x00000058, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBLENG ) == 0x0000005A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DCPCFG ) == 0x0000005C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DCPMAXP ) == 0x0000005E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DCPCTR ) == 0x00000060, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPESEL ) == 0x00000064, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPECFG ) == 0x00000068, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPEMAXP ) == 0x0000006C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPEPERI ) == 0x0000006E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPE_CTR ) == 0x00000070, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPE_TR ) == 0x00000090, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBBCCTRL0 ) == 0x000000B0, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, UCKSEL ) == 0x000000C4, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBMC ) == 0x000000CC, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DEVADD ) == 0x000000D0, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PHYSLEW ) == 0x000000F0, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, LPCTRL ) == 0x00000100, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, LPSTS ) == 0x00000102, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BCCTRL ) == 0x00000140, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PL1CTRL1 ) == 0x00000144, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PL1CTRL2 ) == 0x00000146, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, HL1CTRL1 ) == 0x00000148, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, HL1CTRL2 ) == 0x0000014A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR0R ) == 0x00000160, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR1R ) == 0x00000164, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR2R ) == 0x00000168, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSRCR ) == 0x0000016A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR0R_FS ) == 0x00000400, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR1R_FS ) == 0x00000404, "incorrect offset"); +TU_VERIFY_STATIC(sizeof(RUSB2_PIPE_TR_t) == 4, "incorrect size"); + +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, SYSCFG ) == 0x00000000, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BUSWAIT ) == 0x00000002, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, SYSSTS0 ) == 0x00000004, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PLLSTA ) == 0x00000006, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DVSTCTR0 ) == 0x00000008, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, TESTMODE ) == 0x0000000C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, CFIFO ) == 0x00000014, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D0FIFO ) == 0x00000018, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D1FIFO ) == 0x0000001C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, CFIFOSEL ) == 0x00000020, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, CFIFOCTR ) == 0x00000022, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D0FIFOSEL ) == 0x00000028, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D0FIFOCTR ) == 0x0000002A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D1FIFOSEL ) == 0x0000002C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D1FIFOCTR ) == 0x0000002E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, INTENB0 ) == 0x00000030, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, INTENB1 ) == 0x00000032, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BRDYENB ) == 0x00000036, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, NRDYENB ) == 0x00000038, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BEMPENB ) == 0x0000003A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, SOFCFG ) == 0x0000003C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PHYSET ) == 0x0000003E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, INTSTS0 ) == 0x00000040, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, INTSTS1 ) == 0x00000042, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BRDYSTS ) == 0x00000046, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, NRDYSTS ) == 0x00000048, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BEMPSTS ) == 0x0000004A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, FRMNUM ) == 0x0000004C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, UFRMNUM ) == 0x0000004E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBADDR ) == 0x00000050, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBREQ ) == 0x00000054, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBVAL ) == 0x00000056, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBINDX ) == 0x00000058, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBLENG ) == 0x0000005A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DCPCFG ) == 0x0000005C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DCPMAXP ) == 0x0000005E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DCPCTR ) == 0x00000060, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPESEL ) == 0x00000064, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPECFG ) == 0x00000068, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPEMAXP ) == 0x0000006C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPEPERI ) == 0x0000006E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPE_CTR ) == 0x00000070, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPE_TR ) == 0x00000090, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBBCCTRL0 ) == 0x000000B0, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, UCKSEL ) == 0x000000C4, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBMC ) == 0x000000CC, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DEVADD ) == 0x000000D0, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PHYSLEW ) == 0x000000F0, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, LPCTRL ) == 0x00000100, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, LPSTS ) == 0x00000102, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BCCTRL ) == 0x00000140, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PL1CTRL1 ) == 0x00000144, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PL1CTRL2 ) == 0x00000146, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, HL1CTRL1 ) == 0x00000148, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, HL1CTRL2 ) == 0x0000014A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR0R ) == 0x00000160, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR1R ) == 0x00000164, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR2R ) == 0x00000168, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSRCR ) == 0x0000016A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR0R_FS ) == 0x00000400, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR1R_FS ) == 0x00000404, "incorrect offset"); #ifdef __cplusplus } -- cgit v1.3.1 From e0b1de923c5411417d7818fe0611b3041b2ff2d4 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Mar 2023 22:39:00 +0700 Subject: add ra4m1_ek board --- docs/reference/supported.rst | 13 +- hw/bsp/ra/boards/ra4m1_ek/board.mk | 17 + hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_cfg.h | 35 + hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h | 21 + .../boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_cfg.h | 5 + .../ra4m1_ek/fsp_cfg/bsp_mcu_device_pn_cfg.h | 11 + .../boards/ra4m1_ek/fsp_cfg/bsp_mcu_family_cfg.h | 78 +++ hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/r_ioport_cfg.h | 7 + hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h | 5 + hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c | 232 +++++++ hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld | 738 +++++++++++++++++++++ hw/bsp/ra/boards/ra4m3_ek/board.mk | 2 + hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c | 18 +- 13 files changed, 1172 insertions(+), 10 deletions(-) create mode 100644 hw/bsp/ra/boards/ra4m1_ek/board.mk create mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/r_ioport_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index ae16d361d..b3f3f41d3 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -297,8 +297,17 @@ LPC55 - `LPCXpresso 55s69 EVK `__ - `MCU-Link `__ -Renesas RX ----------- +Renesas +------- + +RA +^^ + +- `Evaluation Kit for RA4M1 `__ +- `Evaluation Kit for RA4M3 `__ + +RX +^^ - `GR-CITRUS `__ - `Renesas RX65N Target Board `__ diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.mk b/hw/bsp/ra/boards/ra4m1_ek/board.mk new file mode 100644 index 000000000..6a661c0b8 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/board.mk @@ -0,0 +1,17 @@ +CFLAGS += \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -DCFG_TUSB_MCU=OPT_MCU_RAXXX + +FSP_MCU_DIR = hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/ra4m1 +FSP_BOARD_DIR = hw/mcu/renesas/fsp/ra/board/ra4m1_ek + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/ra4m1_ek.ld + +# For flash-jlink target +JLINK_DEVICE = R7FA4M1AB +JLINK_IF = SWD + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_cfg.h new file mode 100644 index 000000000..b38a79b40 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_cfg.h @@ -0,0 +1,35 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ + +#include "board.h" +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" + +#undef RA_NOT_DEFINED +#define BSP_CFG_RTOS (0) +#if defined(_RA_BOOT_IMAGE) +#define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x400) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h new file mode 100644 index 000000000..930fa3547 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h @@ -0,0 +1,21 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_HOCO_FREQUENCY (0) /* HOCO 24MHz */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */ +#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL_8_0) /* PLL Mul x8 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* UCLK Src: PLL */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..444d32e56 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (4) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..d810dabb2 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M1AB3CFP +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (262144) +#define BSP_RAM_SIZE_BYTES (32768) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (100) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..3bde2db0d --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_family_cfg.h @@ -0,0 +1,78 @@ +/* generated configuration header file through renesas e2 studio */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA4M1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (24000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) +#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else +/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ +#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..cb7c07932 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,7 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h new file mode 100644 index 000000000..37739c12a --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h @@ -0,0 +1,5 @@ +/* vector numbers are configurable/dynamic, hence this, it will be used inside the port */ +#define TU_IRQn 0 +#define USBFS_RESUME_IRQn 1 +#define USBFS_FIFO_0_IRQn 2 +#define USBFS_FIFO_1_IRQn 3 diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c b/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c new file mode 100644 index 000000000..ea2204837 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c @@ -0,0 +1,232 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022, Rafael Silva + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include + +#include "bsp/board.h" +#include "bsp_api.h" +#include "r_ioport.h" +#include "r_ioport_api.h" +#include "renesas.h" + +/* Key code for writing PRCR register. */ +#define BSP_PRV_PRCR_KEY (0xA500U) +#define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U) +#define BSP_PRV_PRCR_LOCK ((BSP_PRV_PRCR_KEY) | 0x0U) + +#define SW1 (BSP_IO_PORT_01_PIN_05) +#define LED1 (BSP_IO_PORT_01_PIN_06) + +#define LED_STATE_ON 1 +#define BUTTON_STATE_ACTIVE 0 + +/* ISR prototypes */ +void usbfs_interrupt_handler(void); +void usbfs_resume_handler(void); +void usbfs_d0fifo_handler(void); +void usbfs_d1fifo_handler(void); + +BSP_DONT_REMOVE const + fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = { + [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */ + [1] = usbfs_resume_handler, /* USBFS RESUME (USBFS resume interrupt) */ + [2] = usbfs_d0fifo_handler, /* USBFS FIFO 0 (DMA transfer request 0) */ + [3] = usbfs_d1fifo_handler, /* USBFS FIFO 1 (DMA transfer request 1) */ +}; +const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = { + [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT), /* USBFS INT (USBFS interrupt) */ + [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */ + [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */ + [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1) /* USBFS FIFO 1 (DMA transfer request 1) */ +}; + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { .pin = LED1, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) }, + { .pin = SW1 , .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) }, + + { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) }, + { .pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) }, + { .pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) }, + +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data) / sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = {.p_api = &g_ioport_on_ioport, .p_ctrl = &g_ioport_ctrl, .p_cfg = &g_bsp_pin_cfg}; + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void usbfs_interrupt_handler(void) +{ + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + +#if CFG_TUH_ENABLED + tuh_int_handler(0); +#endif + +#if CFG_TUD_ENABLED + tud_int_handler(0); +#endif +} + +void usbfs_resume_handler(void) +{ + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + +#if CFG_TUH_ENABLED + tuh_int_handler(0); +#endif + +#if CFG_TUD_ENABLED + tud_int_handler(0); +#endif +} + +void usbfs_d0fifo_handler(void) +{ + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + +#if CFG_TUH_ENABLED + tuh_int_handler(0); +#endif + +#if CFG_TUD_ENABLED + tud_int_handler(0); +#endif +} + +void usbfs_d1fifo_handler(void) +{ + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + +#if CFG_TUH_ENABLED + tuh_int_handler(0); +#endif + +#if CFG_TUD_ENABLED + tud_int_handler(0); +#endif +} + +void board_init(void) +{ + /* Configure pins. */ + R_IOPORT_Open(&g_ioport_ctrl, &g_bsp_pin_cfg); + + /* Enable USB_BASE */ + R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_PRC1_UNLOCK; + R_MSTP->MSTPCRB &= ~(1U << 11U); + R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_LOCK; + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(TU_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + +#if CFG_TUSB_OS == OPT_OS_NONE + /* Init systick */ + SysTick_Config(SystemCoreClock / 1000); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + R_IOPORT_PinWrite(&g_ioport_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON); +} + +uint32_t board_button_read(void) +{ + bsp_io_level_t lvl; + R_IOPORT_PinRead(&g_ioport_ctrl, SW1, &lvl); + return lvl == BUTTON_STATE_ACTIVE; +} + +int board_uart_read(uint8_t *buf, int len) +{ + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) +{ + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#else +#endif + +int close(int fd) +{ + (void) fd; + return -1; +} +int fstat(int fd, void *pstat) +{ + (void) fd; + (void) pstat; + return 0; +} +off_t lseek(int fd, off_t pos, int whence) +{ + (void) fd; + (void) pos; + (void) whence; + return 0; +} +int isatty(int fd) +{ + (void) fd; + return 1; +} diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld b/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld new file mode 100644 index 000000000..8ddaa0a97 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld @@ -0,0 +1,738 @@ +/* generated memory regions file - do not edit */ +RAM_START = 0x20000000; +RAM_LENGTH = 0x8000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x40000; +DATA_FLASH_START = 0x40100000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x00000000; +OPTION_SETTING_LENGTH = 0x0; +OPTION_SETTING_S_START = 0x80000000; +OPTION_SETTING_S_LENGTH = 0x0; +ID_CODE_START = 0x01010018; +ID_CODE_LENGTH = 0x20; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x0; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +/* + Linker File for Renesas FSP +*/ + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +NS_OFFSET_START = DEFINED(NS_OFFSET_START) ? NS_OFFSET_START : 0; +NS_IMAGE_OFFSET = DEFINED(PROJECT_NONSECURE) ? NS_OFFSET_START : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START; +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START + NS_IMAGE_OFFSET, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START + NS_IMAGE_OFFSET, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN + NS_IMAGE_OFFSET, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START + NS_IMAGE_OFFSET, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START + NS_IMAGE_OFFSET, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET + 0x34, LENGTH = OPTION_SETTING_LENGTH - 0x34 + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + /* Initialized ITCM data. */ + .itcm_data : + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start__ = .; + + KEEP(*(.itcm_data*)) + + /* All ITCM data end */ + __itcm_data_end__ = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end__, 8192); + } > ITCM + + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + . = ALIGN(128); + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + /* Start address of the initial values for .dtcm_data. */ + __dtcm_data_init_start = __etext + __data_end__ - __data_start__; + + /* Initialized DTCM data. */ + .dtcm_data : + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start__ = .; + + KEEP(*(.dtcm_data*)) + + /* Initialized DTCM data end */ + __dtcm_data_end__ = .; + } > DTCM AT > FLASH + + /* Uninitialized DTCM data. */ + .dtcm_noinit (NOLOAD): + { + /* Uninitialized DTCM data start */ + __dtcm_noinit_start = .; + + KEEP(*(.dtcm_noinit*)) + + /* Uninitialized DTCM data end */ + __dtcm_noinit_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_noinit_end, 8192); + } > DTCM + + /* TrustZone Secure Gateway Stubs Section. */ + + /* Some arithmetic is needed to eliminate unnecessary FILL for secure projects. */ + /* 1. Get the address to the next block after the .data section in FLASH. */ + DATA_END = LOADADDR(.data) + SIZEOF(.data); + /* 2. Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block after .data */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(DATA_END, 1024); + /* 3. Manually specify the start location for .gnu.sgstubs */ + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__); + .qspi_non_retentive : AT (__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__); + .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__); + .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_N = __ID_Code_End; + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.mk b/hw/bsp/ra/boards/ra4m3_ek/board.mk index 61a7c5c4a..d668db0ea 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/board.mk +++ b/hw/bsp/ra/boards/ra4m3_ek/board.mk @@ -13,3 +13,5 @@ LD_FILE = $(BOARD_PATH)/ra4m3_ek.ld # For flash-jlink target JLINK_DEVICE = R7FA4M3AF JLINK_IF = SWD + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c b/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c index eab102de9..327ef71d5 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c +++ b/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c @@ -91,11 +91,11 @@ void usbfs_interrupt_handler(void) IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST +#if CFG_TUH_ENABLED tuh_int_handler(0); #endif -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE +#if CFG_TUD_ENABLED tud_int_handler(0); #endif } @@ -104,37 +104,39 @@ void usbfs_resume_handler(void) IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST +#if CFG_TUH_ENABLED tuh_int_handler(0); #endif -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE +#if CFG_TUD_ENABLED tud_int_handler(0); #endif } + void usbfs_d0fifo_handler(void) { IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST +#if CFG_TUH_ENABLED tuh_int_handler(0); #endif -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE +#if CFG_TUD_ENABLED tud_int_handler(0); #endif } + void usbfs_d1fifo_handler(void) { IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST +#if CFG_TUH_ENABLED tuh_int_handler(0); #endif -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE +#if CFG_TUD_ENABLED tud_int_handler(0); #endif } -- cgit v1.3.1 From 3623ba1884ddff23e9b64766cb6dd032f1425846 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 17 Mar 2023 16:12:49 +0700 Subject: fix trailing space and new line temporarily disable codespell --- .gitattributes | 6 +- .github/ISSUE_TEMPLATE/bug_report.yml | 6 +- .github/workflows/trigger.yml | 4 +- .pre-commit-config.yaml | 10 +- .readthedocs.yaml | 1 - docs/assets/stack.svg | 2 +- docs/contributing/code_of_conduct.rst | 2 +- docs/info/changelog.rst | 54 +- docs/info/contributors.rst | 2 +- docs/reference/getting_started.rst | 14 +- examples/device/audio_4_channel_mic/skip.txt | 2 +- examples/device/audio_4_channel_mic/src/main.c | 2 +- .../audio_4_channel_mic/src/plot_audio_samples.py | 1 - .../audio_4_channel_mic/src/usb_descriptors.c | 2 +- examples/device/audio_test/CMakeLists.txt | 2 +- examples/device/audio_test/skip.txt | 2 +- examples/device/audio_test/src/main.c | 2 +- .../device/audio_test/src/plot_audio_samples.py | 3 +- examples/device/audio_test/src/usb_descriptors.c | 2 +- .../device/audio_test_multi_rate/CMakeLists.txt | 2 +- examples/device/audio_test_multi_rate/skip.txt | 2 +- examples/device/audio_test_multi_rate/src/main.c | 10 +- .../src/plot_audio_samples.py | 3 +- .../device/audio_test_multi_rate/src/tusb_config.h | 2 +- .../audio_test_multi_rate/src/usb_descriptors.c | 2 +- .../audio_test_multi_rate/src/usb_descriptors.h | 4 +- examples/device/board_test/src/CMakeLists.txt | 2 +- examples/device/board_test/src/main.c | 2 +- examples/device/cdc_dual_ports/CMakeLists.txt | 2 +- examples/device/cdc_dual_ports/src/main.c | 2 +- .../device/cdc_dual_ports/src/usb_descriptors.c | 2 +- examples/device/cdc_msc/CMakeLists.txt | 2 +- examples/device/cdc_msc/skip.txt | 2 +- examples/device/cdc_msc/src/main.c | 2 +- examples/device/cdc_msc/src/msc_disk.c | 2 +- examples/device/cdc_msc/src/usb_descriptors.c | 2 +- examples/device/cdc_msc_freertos/src/main.c | 2 +- examples/device/cdc_msc_freertos/src/msc_disk.c | 2 +- .../device/cdc_msc_freertos/src/usb_descriptors.c | 2 +- examples/device/dfu_runtime/CMakeLists.txt | 2 +- examples/device/dfu_runtime/src/main.c | 2 +- .../device/dynamic_configuration/CMakeLists.txt | 2 +- examples/device/dynamic_configuration/skip.txt | 2 +- examples/device/dynamic_configuration/src/main.c | 2 +- .../device/dynamic_configuration/src/msc_disk.c | 2 +- .../dynamic_configuration/src/usb_descriptors.c | 2 +- examples/device/hid_boot_interface/CMakeLists.txt | 2 +- examples/device/hid_boot_interface/Makefile | 2 +- examples/device/hid_boot_interface/src/main.c | 2 +- .../hid_boot_interface/src/usb_descriptors.c | 2 +- .../hid_boot_interface/src/usb_descriptors.h | 2 +- examples/device/hid_composite/CMakeLists.txt | 2 +- examples/device/hid_composite/src/main.c | 2 +- .../device/hid_composite/src/usb_descriptors.c | 2 +- .../device/hid_composite/src/usb_descriptors.h | 2 +- examples/device/hid_composite_freertos/src/main.c | 2 +- .../hid_composite_freertos/src/usb_descriptors.c | 2 +- .../hid_composite_freertos/src/usb_descriptors.h | 2 +- examples/device/hid_generic_inout/CMakeLists.txt | 2 +- examples/device/hid_generic_inout/hid_test.js | 3 +- examples/device/hid_generic_inout/src/main.c | 2 +- .../device/hid_generic_inout/src/usb_descriptors.c | 2 +- .../device/hid_multiple_interface/CMakeLists.txt | 2 +- examples/device/midi_test/CMakeLists.txt | 2 +- examples/device/midi_test/src/main.c | 2 +- examples/device/midi_test/src/usb_descriptors.c | 2 +- examples/device/msc_dual_lun/CMakeLists.txt | 2 +- examples/device/msc_dual_lun/skip.txt | 2 +- examples/device/msc_dual_lun/src/main.c | 2 +- examples/device/msc_dual_lun/src/msc_disk_dual.c | 2 +- examples/device/msc_dual_lun/src/usb_descriptors.c | 2 +- examples/device/net_lwip_webserver/CMakeLists.txt | 2 +- examples/device/net_lwip_webserver/skip.txt | 2 +- examples/device/net_lwip_webserver/src/arch/cc.h | 32 +- examples/device/net_lwip_webserver/src/lwipopts.h | 28 +- examples/device/net_lwip_webserver/src/main.c | 6 +- .../net_lwip_webserver/src/usb_descriptors.c | 4 +- examples/device/uac2_headset/CMakeLists.txt | 2 +- examples/device/uac2_headset/src/main.c | 4 +- examples/device/uac2_headset/src/usb_descriptors.c | 2 +- examples/device/uac2_headset/src/usb_descriptors.h | 2 +- examples/device/usbtmc/CMakeLists.txt | 2 +- examples/device/usbtmc/src/main.c | 2 +- examples/device/usbtmc/visaQuery.py | 26 +- examples/device/video_capture/CMakeLists.txt | 2 +- examples/device/video_capture/src/main.c | 2 +- .../device/video_capture/src/usb_descriptors.c | 2 +- .../device/video_capture/src/usb_descriptors.h | 2 +- examples/device/webusb_serial/CMakeLists.txt | 2 +- examples/device/webusb_serial/src/main.c | 2 +- .../device/webusb_serial/src/usb_descriptors.c | 2 +- .../device/webusb_serial/src/usb_descriptors.h | 2 +- examples/dual/host_hid_to_device_cdc/src/main.c | 2 +- .../host_hid_to_device_cdc/src/usb_descriptors.c | 2 +- examples/host/bare_api/src/main.c | 2 +- examples/host/cdc_msc_hid/src/main.c | 2 +- examples/host/cdc_msc_hid/src/msc_app.c | 3 +- examples/host/hid_controller/src/main.c | 2 +- examples/host/msc_file_explorer/src/main.c | 2 +- examples/host/msc_file_explorer/src/msc_app.c | 2 +- examples/rules.mk | 2 +- hw/bsp/ansi_escape.h | 2 +- hw/bsp/board.c | 2 +- hw/bsp/board.h | 2 +- .../boards/raspberrypi_zero_w/board.h | 2 +- .../boards/raspberrypi_zero_w/board.mk | 2 +- hw/bsp/broadcom_32bit/family.c | 2 +- .../broadcom_64bit/boards/raspberrypi_cm4/board.h | 2 +- .../boards/raspberrypi_zero2w/board.h | 2 +- hw/bsp/broadcom_64bit/family.c | 2 +- hw/bsp/brtmm90x/family.c | 7 +- hw/bsp/brtmm90x/family.mk | 8 +- hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h | 2 +- .../ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c | 4 +- hw/bsp/ch32v307/ch32v307.ld | 35 +- hw/bsp/ch32v307/ch32v30x_conf.h | 7 +- hw/bsp/ch32v307/ch32v30x_it.c | 2 - hw/bsp/ch32v307/ch32v30x_it.h | 2 - hw/bsp/ch32v307/core_riscv.h | 7 +- hw/bsp/ch32v307/system_ch32v30x.c | 140 ++--- hw/bsp/ch32v307/system_ch32v30x.h | 9 +- hw/bsp/da14695_dk_usb/da14695_dk_usb.c | 2 +- hw/bsp/da14695_dk_usb/da1469x.ld | 1 - hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c | 2 +- hw/bsp/da1469x_dk_pro/da1469x.ld | 1 - hw/bsp/ea4088qs/ea4088qs.c | 2 +- hw/bsp/ea4088qs/lpc4088.ld | 54 +- hw/bsp/ea4357/ea4357.c | 2 +- hw/bsp/ea4357/lpc4357.ld | 106 ++-- hw/bsp/ea4357/pca9532.c | 6 +- hw/bsp/ea4357/pca9532.h | 2 +- hw/bsp/esp32s2/boards/CMakeLists.txt | 2 +- .../boards/adafruit_feather_esp32s2/board.cmake | 2 +- .../boards/adafruit_feather_esp32s2/board.h | 2 +- .../boards/adafruit_magtag_29gray/board.cmake | 2 +- .../esp32s2/boards/adafruit_magtag_29gray/board.h | 2 +- .../boards/adafruit_metro_esp32s2/board.cmake | 2 +- .../esp32s2/boards/adafruit_metro_esp32s2/board.h | 2 +- hw/bsp/esp32s2/boards/esp32s2.c | 3 +- .../esp32s2/boards/espressif_kaluga_1/board.cmake | 2 +- hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h | 2 +- .../esp32s2/boards/espressif_saola_1/board.cmake | 2 +- hw/bsp/esp32s2/boards/espressif_saola_1/board.h | 2 +- hw/bsp/esp32s2/components/led_strip/CMakeLists.txt | 1 - hw/bsp/esp32s2/family.cmake | 2 +- hw/bsp/esp32s2/family.mk | 1 - hw/bsp/esp32s3/boards/CMakeLists.txt | 2 +- hw/bsp/esp32s3/boards/esp32s3.c | 3 +- .../esp32s3/boards/espressif_addax_1/board.cmake | 2 +- hw/bsp/esp32s3/boards/espressif_addax_1/board.h | 2 +- .../boards/espressif_s3_devkitc/board.cmake | 2 +- hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h | 2 +- .../boards/espressif_s3_devkitm/board.cmake | 2 +- hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h | 2 +- hw/bsp/esp32s3/components/led_strip/CMakeLists.txt | 1 - hw/bsp/esp32s3/family.cmake | 2 +- hw/bsp/esp32s3/family.mk | 1 - hw/bsp/f1c100s/README.md | 2 +- hw/bsp/f1c100s/board.h | 2 +- hw/bsp/f1c100s/board.mk | 6 +- hw/bsp/f1c100s/f1c100s.c | 4 +- hw/bsp/family_support.cmake | 2 +- hw/bsp/fomu/boards/fomu/board.mk | 2 +- hw/bsp/fomu/fomu.c | 2 +- hw/bsp/fomu/include/hw/common.h | 2 +- hw/bsp/fomu/include/irq.h | 2 +- hw/bsp/frdm_k32l2b/board.h | 2 +- hw/bsp/frdm_k32l2b/frdm_k32l2b.c | 12 +- hw/bsp/frdm_kl25z/frdm_kl25z.c | 4 +- hw/bsp/gd32vf103/family.c | 2 +- hw/bsp/gd32vf103/system_gd32vf103.c | 10 +- hw/bsp/imxrt/boards/metro_m7_1011/board.h | 2 +- hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld | 2 +- hw/bsp/imxrt/boards/mimxrt1010_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1015_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1020_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1024_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1060_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1064_evk/board.h | 2 +- hw/bsp/imxrt/boards/teensy_40/board.h | 2 +- hw/bsp/imxrt/boards/teensy_40/board.mk | 2 +- hw/bsp/imxrt/boards/teensy_41/board.h | 2 +- hw/bsp/imxrt/boards/teensy_41/board.mk | 2 +- hw/bsp/imxrt/family.c | 2 +- hw/bsp/kuiic/K32L2B31xxxxA_flash.ld | 1 - hw/bsp/kuiic/board.h | 2 +- hw/bsp/kuiic/kuiic.c | 16 +- hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld | 60 +- hw/bsp/lpc15/family.c | 2 +- hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld | 86 +-- hw/bsp/lpc18/boards/mcb1800/lpc1857.ld | 106 ++-- hw/bsp/lpc18/family.c | 2 +- hw/bsp/lpc54/boards/lpcxpresso54628/board.mk | 2 +- hw/bsp/lpc54/family.c | 2 +- .../double_m33_express/LPC55S69_cm33_core0_uf2.ld | 1 - hw/bsp/lpc55/family.c | 2 +- hw/bsp/lpcxpresso11u37/lpc11u37.ld | 50 +- hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c | 2 +- hw/bsp/lpcxpresso11u68/lpc11u68.ld | 68 +-- hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c | 2 +- hw/bsp/lpcxpresso1347/lpc1347.ld | 68 +-- hw/bsp/lpcxpresso1347/lpcxpresso1347.c | 4 +- hw/bsp/lpcxpresso1769/lpc1769.ld | 54 +- hw/bsp/lpcxpresso1769/lpcxpresso1769.c | 2 +- hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c | 2 +- hw/bsp/mbed1768/lpc1768.ld | 54 +- hw/bsp/mbed1768/mbed1768.c | 2 +- hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld | 8 +- hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c | 4 +- hw/bsp/ngx4330/ngx4330.c | 2 +- hw/bsp/ngx4330/ngx4330.ld | 80 +-- hw/bsp/nrf/boards/adafruit_clue/board.h | 2 +- .../nrf/boards/adafruit_clue/nrf52840_s140_v6.ld | 4 +- .../arduino_nano33_ble/arduino_nano33_ble.ld | 2 +- hw/bsp/nrf/boards/arduino_nano33_ble/board.h | 2 +- .../nrf/boards/circuitplayground_bluefruit/board.h | 2 +- .../nrf52840_s140_v6.ld | 4 +- hw/bsp/nrf/boards/feather_nrf52840_express/board.h | 2 +- .../feather_nrf52840_express/nrf52840_s140_v6.ld | 4 +- hw/bsp/nrf/boards/feather_nrf52840_sense/board.h | 2 +- .../feather_nrf52840_sense/nrf52840_s140_v6.ld | 4 +- hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h | 2 +- .../boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld | 4 +- hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h | 2 +- hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk | 2 +- hw/bsp/nrf/boards/pca10056/board.h | 2 +- hw/bsp/nrf/boards/pca10059/board.h | 2 +- hw/bsp/nrf/boards/pca10100/board.h | 2 +- hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h | 2 +- hw/bsp/nrf/family.c | 2 +- hw/bsp/nutiny_nuc121s/nuc121_flash.ld | 2 +- hw/bsp/nutiny_nuc121s/nutiny_nuc121.c | 2 +- hw/bsp/nutiny_nuc125s/nuc125_flash.ld | 2 +- hw/bsp/nutiny_nuc125s/nutiny_nuc125.c | 2 +- hw/bsp/nutiny_nuc126v/nutiny_nuc126.c | 2 +- hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c | 2 +- hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c | 2 +- hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c | 2 +- hw/bsp/pic32mz/family.c | 2 +- hw/bsp/rp2040/board.h | 2 +- hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake | 2 +- hw/bsp/rp2040/family.cmake | 2 +- hw/bsp/rx/boards/gr_citrus/gr_citrus.c | 6 +- hw/bsp/rx/boards/rx65n_target/rx65n_target.c | 2 +- .../boards/samd11_xplained/samd11d14am_flash.ld | 4 +- hw/bsp/samd21/boards/atsamd21_xpro/board.h | 2 +- .../boards/circuitplayground_express/board.h | 2 +- hw/bsp/samd21/boards/curiosity_nano/board.h | 2 +- hw/bsp/samd21/boards/feather_m0_express/board.h | 2 +- hw/bsp/samd21/boards/itsybitsy_m0/board.h | 2 +- hw/bsp/samd21/boards/luna_d21/board.h | 2 +- hw/bsp/samd21/boards/luna_d21/board.mk | 1 - hw/bsp/samd21/boards/metro_m0_express/board.h | 2 +- hw/bsp/samd21/boards/qtpy/board.h | 2 +- hw/bsp/samd21/boards/seeeduino_xiao/board.h | 2 +- hw/bsp/samd21/boards/trinket_m0/board.h | 1 - hw/bsp/samd21/boards/trinket_m0/board.mk | 1 - hw/bsp/samd21/family.c | 2 +- hw/bsp/samd51/boards/feather_m4_express/board.h | 2 +- hw/bsp/samd51/boards/itsybitsy_m4/board.h | 2 +- hw/bsp/samd51/boards/metro_m4_express/board.h | 2 +- hw/bsp/samd51/boards/metro_m4_express/board.mk | 1 - hw/bsp/samd51/boards/pybadge/board.h | 2 +- hw/bsp/samd51/boards/pyportal/board.h | 2 +- hw/bsp/samd51/family.c | 2 +- hw/bsp/same54xplainedpro/same54p20a_flash.ld | 4 +- hw/bsp/same54xplainedpro/same54p20a_sram.ld | 4 +- hw/bsp/samg55xplained/samg55xplained.c | 2 +- hw/bsp/saml2x/boards/atsaml21_xpro/board.h | 2 +- hw/bsp/saml2x/boards/saml22_feather/board.h | 2 +- .../saml2x/boards/saml22_feather/saml22_feather.ld | 4 +- hw/bsp/saml2x/boards/sensorwatch_m0/board.h | 2 +- .../saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld | 4 +- hw/bsp/saml2x/family.c | 2 +- hw/bsp/sltb009a/sltb009a.c | 4 +- hw/bsp/spresense/board_spresense.c | 6 +- hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h | 2 +- hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk | 2 +- .../stm32f070rbnucleo/stm32F070rbtx_flash.ld | 14 +- .../boards/stm32f072disco/STM32F072RBTx_FLASH.ld | 8 +- hw/bsp/stm32f0/boards/stm32f072disco/board.h | 2 +- hw/bsp/stm32f0/boards/stm32f072eval/board.h | 2 +- hw/bsp/stm32f0/family.c | 2 +- hw/bsp/stm32f0/stm32f0xx_hal_conf.h | 51 +- .../boards/stm32f103_bluepill/STM32F103X8_FLASH.ld | 6 +- hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h | 2 +- .../boards/stm32f103_mini_2/STM32F103XC_FLASH.ld | 6 +- hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h | 2 +- hw/bsp/stm32f1/family.c | 8 +- hw/bsp/stm32f1/stm32f1xx_hal_conf.h | 44 +- hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld | 8 +- hw/bsp/stm32f207nucleo/stm32f207nucleo.c | 4 +- hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h | 56 +- hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld | 18 +- hw/bsp/stm32f303disco/stm32f303disco.c | 2 +- hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h | 38 +- .../feather_stm32f405/STM32F405RGTx_FLASH.ld | 18 +- hw/bsp/stm32f4/boards/feather_stm32f405/board.h | 2 +- .../boards/pyboardv11/STM32F405RGTx_FLASH.ld | 18 +- hw/bsp/stm32f4/boards/pyboardv11/board.h | 2 +- .../stm32f401blackpill/STM32F401VCTx_FLASH.ld | 8 +- hw/bsp/stm32f4/boards/stm32f401blackpill/board.h | 2 +- .../boards/stm32f401blackpill/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f407disco/STM32F407VGTx_FLASH.ld | 18 +- hw/bsp/stm32f4/boards/stm32f407disco/board.h | 2 +- .../boards/stm32f407disco/stm32f4xx_hal_conf.h | 82 +-- .../stm32f411blackpill/STM32F411CEUx_FLASH.ld | 8 +- hw/bsp/stm32f4/boards/stm32f411blackpill/board.h | 2 +- .../boards/stm32f411blackpill/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f411disco/STM32F411VETx_FLASH.ld | 8 +- hw/bsp/stm32f4/boards/stm32f411disco/board.h | 2 +- .../boards/stm32f411disco/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f412disco/STM32F412ZGTx_FLASH.ld | 8 +- hw/bsp/stm32f4/boards/stm32f412disco/board.h | 2 +- .../boards/stm32f412disco/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld | 8 +- .../boards/stm32f412nucleo/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f439nucleo/stm32f4xx_hal_conf.h | 70 +-- hw/bsp/stm32f4/family.c | 2 +- hw/bsp/stm32f7/boards/stlinkv3mini/board.h | 2 +- hw/bsp/stm32f7/boards/stm32f723disco/board.h | 2 +- hw/bsp/stm32f7/boards/stm32f746disco/board.h | 2 +- .../boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld | 6 +- hw/bsp/stm32f7/boards/stm32f746nucleo/board.h | 2 +- .../boards/stm32f746nucleo/stm32f7xx_hal_conf.h | 52 +- .../boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld | 8 +- hw/bsp/stm32f7/boards/stm32f767nucleo/board.h | 2 +- hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk | 2 +- .../boards/stm32f767nucleo/stm32f7xx_hal_conf.h | 52 +- hw/bsp/stm32f7/boards/stm32f769disco/board.h | 2 +- .../boards/stm32g474nucleo/STM32G474RETx_FLASH.ld | 8 +- hw/bsp/stm32g4/family.c | 2 +- hw/bsp/stm32g4/stm32g4xx_hal_conf.h | 26 +- hw/bsp/stm32h7/boards/daisyseed/board.mk | 1 - .../boards/daisyseed/stm32h750ibkx_flash.ld | 2 - .../boards/stm32h743eval/stm32h743xx_flash.ld | 8 +- .../boards/stm32h743nucleo/stm32h743xx_flash.ld | 8 +- hw/bsp/stm32h7/boards/stm32h745disco/board.mk | 1 - .../waveshare_openh743i/STM32H743IITX_FLASH.ld | 2 - hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk | 2 +- hw/bsp/stm32h7/family.c | 2 +- hw/bsp/stm32h7/stm32h7xx_hal_conf.h | 6 +- .../boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld | 8 +- hw/bsp/stm32l0/boards/stm32l052dap52/board.h | 34 +- hw/bsp/stm32l0/family.c | 2 +- hw/bsp/stm32l0/stm32l0xx_hal_conf.h | 49 +- hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld | 8 +- hw/bsp/stm32l0538disco/stm32l0538disco.c | 2 +- hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h | 102 ++-- .../boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld | 14 +- hw/bsp/stm32l4/boards/stm32l412nucleo/board.h | 6 +- .../boards/stm32l476disco/STM32L476VGTx_FLASH.ld | 14 +- hw/bsp/stm32l4/boards/stm32l476disco/board.h | 2 +- .../boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld | 12 +- hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h | 2 +- .../boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld | 6 +- hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h | 2 +- hw/bsp/stm32l4/stm32l4xx_hal_conf.h | 10 +- hw/bsp/stm32u5/stm32u5xx_hal_conf.h | 1 - .../stm32wb55nucleo/stm32wb55xx_flash_cm4.ld | 8 +- hw/bsp/stm32wb/family.c | 2 +- hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk | 2 +- hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld | 24 +- hw/bsp/tm4c123/family.c | 1 - hw/bsp/xmc4000/boards/xmc4500_relax/board.h | 2 +- hw/mcu/bridgetek/ft9xx/Readme.md | 4 +- hw/mcu/bridgetek/ft9xx/scripts/crt0.S | 8 +- hw/mcu/dialog/README.md | 4 +- .../da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt | 1 - .../sdk/bsp/include/cmsis_compiler.h | 1 - .../SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h | 10 +- .../SDK_10.0.8.105/sdk/bsp/include/core_cm0.h | 2 +- .../SDK_10.0.8.105/sdk/bsp/include/core_cm33.h | 4 +- .../SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h | 33 +- hw/mcu/dialog/da1469x/da1469x.ld | 1 - hw/mcu/dialog/da1469x/include/mcu/mcu.h | 1 - .../nrf5x/s140_nrf52_6.1.1_API/include/ble.h | 2 +- .../nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h | 2 +- lib/SEGGER_RTT/RTT/SEGGER_RTT.c | 16 +- lib/SEGGER_RTT/RTT/SEGGER_RTT.h | 2 +- lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S | 6 +- lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h | 12 +- lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c | 4 +- lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c | 42 +- lib/fatfs/source/00history.txt | 1 - lib/fatfs/source/00readme.txt | 1 - lib/fatfs/source/diskio.c | 1 - lib/fatfs/source/ff.c | 1 - lib/fatfs/source/ffsystem.c | 1 - lib/networking/dhserver.c | 10 +- lib/networking/dhserver.h | 6 +- lib/networking/dnserver.c | 8 +- lib/networking/dnserver.h | 6 +- lib/networking/ndis.h | 10 +- lib/networking/rndis_protocol.h | 28 +- lib/networking/rndis_reports.c | 14 +- src/class/audio/audio.h | 6 +- src/class/audio/audio_device.c | 6 +- src/class/audio/audio_device.h | 4 +- src/class/bth/bth_device.h | 2 +- src/class/cdc/cdc_device.c | 12 +- src/class/cdc/cdc_device.h | 2 +- src/class/cdc/cdc_host.h | 2 +- src/class/cdc/cdc_rndis.h | 2 +- src/class/cdc/cdc_rndis_host.c | 2 +- src/class/cdc/cdc_rndis_host.h | 2 +- src/class/hid/hid.h | 2 +- src/class/midi/midi.h | 2 +- src/class/midi/midi_device.c | 2 +- src/class/midi/midi_device.h | 2 +- src/class/msc/msc.h | 2 +- src/class/msc/msc_device.h | 2 +- src/class/msc/msc_host.c | 12 +- src/class/msc/msc_host.h | 2 +- src/class/net/ecm_rndis_device.c | 2 +- src/class/net/ncm_device.c | 2 +- src/class/net/net_device.h | 2 +- src/class/usbtmc/usbtmc.h | 1 - src/class/usbtmc/usbtmc_device.c | 4 +- src/class/vendor/vendor_device.h | 2 +- src/class/vendor/vendor_host.c | 2 +- src/class/vendor/vendor_host.h | 2 +- src/class/video/video_device.c | 2 +- src/common/tusb_compiler.h | 4 +- src/common/tusb_timeout.h | 2 +- src/common/tusb_verify.h | 2 +- src/device/dcd.h | 2 +- src/device/usbd.c | 4 +- src/device/usbd_pvt.h | 2 +- src/host/hcd.h | 2 +- src/host/hub.c | 4 +- src/host/usbh.h | 2 +- src/osal/osal.h | 2 +- src/osal/osal_freertos.h | 2 +- src/osal/osal_none.h | 2 +- src/osal/osal_pico.h | 2 +- src/osal/osal_rtx4.h | 4 +- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 78 +-- src/portable/chipidea/ci_hs/ci_hs_type.h | 2 +- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 2 +- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 2 +- src/portable/ehci/ehci.c | 6 +- src/portable/espressif/esp32sx/dcd_esp32sx.c | 1 - src/portable/mentor/musb/dcd_musb.c | 8 +- src/portable/mentor/musb/hcd_musb.c | 4 +- src/portable/microchip/pic/dcd_pic.c | 4 +- src/portable/microchip/pic32mz/usbhs_registers.h | 40 +- src/portable/microchip/samg/dcd_samg.c | 2 +- src/portable/microchip/samx7x/common_usb_regs.h | 6 +- src/portable/microchip/samx7x/dcd_samx7x.c | 36 +- src/portable/nordic/nrf5x/dcd_nrf5x.c | 2 +- src/portable/nuvoton/nuc120/dcd_nuc120.c | 6 +- src/portable/nuvoton/nuc121/dcd_nuc121.c | 6 +- src/portable/nuvoton/nuc505/dcd_nuc505.c | 6 +- src/portable/nxp/khci/dcd_khci.c | 6 +- src/portable/nxp/khci/hcd_khci.c | 4 +- src/portable/nxp/lpc17_40/dcd_lpc17_40.c | 2 +- src/portable/nxp/lpc17_40/dcd_lpc17_40.h | 2 +- src/portable/nxp/lpc17_40/hcd_lpc17_40.c | 3 +- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 7 +- .../nxp/transdimension/common_transdimension.h | 2 +- .../nxp/transdimension/dcd_transdimension.c | 2 +- .../nxp/transdimension/hcd_transdimension.c | 2 +- src/portable/ohci/ohci.c | 3 +- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 2 +- src/portable/raspberrypi/rp2040/rp2040_usb.h | 2 +- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 45 +- src/portable/st/synopsys/synopsys_common.h | 672 ++++++++++----------- src/portable/sunxi/dcd_sunxi_musb.c | 6 +- src/portable/template/dcd_template.c | 2 +- src/portable/valentyusb/eptri/dcd_eptri.c | 2 +- src/portable/valentyusb/eptri/dcd_eptri.h | 2 +- src/portable/wch/ch32v307/dcd_usbhs.c | 8 +- test/fuzz/dcd_fuzz.cc | 4 +- test/fuzz/device/cdc/CMakeLists.txt | 2 +- test/fuzz/device/cdc/src/fuzz.cc | 4 +- test/fuzz/device/msc/CMakeLists.txt | 2 +- test/fuzz/device/msc/src/fuzz.cc | 1 - test/fuzz/device/net/CMakeLists.txt | 2 +- test/fuzz/device/net/src/arch/cc.h | 32 +- test/fuzz/device/net/src/fuzz.cc | 2 +- test/fuzz/device/net/src/lwipopts.h | 28 +- test/fuzz/dicts/cdc.dict | 1 - test/fuzz/make.mk | 3 +- test/fuzz/msc_fuzz.cc | 2 +- test/fuzz/net_fuzz.cc | 2 +- test/fuzz/rules.mk | 6 +- test/unit-test/test/device/msc/test_msc_device.c | 2 +- test/unit-test/test/device/usbd/test_usbd.c | 2 +- test/unit-test/test/test_fifo.c | 2 +- test/unit-test/vendor/ceedling/lib/ceedling.rb | 1 - .../ceedling/lib/ceedling/build_invoker_utils.rb | 14 +- .../vendor/ceedling/lib/ceedling/cacheinator.rb | 10 +- .../ceedling/lib/ceedling/cacheinator_helper.rb | 2 +- .../vendor/ceedling/lib/ceedling/cmock_builder.rb | 8 +- .../vendor/ceedling/lib/ceedling/configurator.rb | 1 - .../ceedling/lib/ceedling/configurator_plugins.rb | 2 +- .../ceedling/lib/ceedling/configurator_setup.rb | 2 +- .../lib/ceedling/configurator_validator.rb | 78 +-- .../vendor/ceedling/lib/ceedling/erb_wrapper.rb | 2 +- .../vendor/ceedling/lib/ceedling/file_finder.rb | 1 - .../ceedling/lib/ceedling/file_finder_helper.rb | 22 +- .../ceedling/lib/ceedling/file_system_utils.rb | 14 +- .../ceedling/lib/ceedling/file_system_wrapper.rb | 2 +- .../vendor/ceedling/lib/ceedling/flaginator.rb | 14 +- .../ceedling/lib/ceedling/generator_helper.rb | 8 +- .../lib/ceedling/generator_test_results.rb | 2 +- .../generator_test_results_sanity_checker.rb | 22 +- .../vendor/ceedling/lib/ceedling/loginator.rb | 6 +- .../vendor/ceedling/lib/ceedling/makefile.rb | 4 +- .../vendor/ceedling/lib/ceedling/objects.yml | 2 +- .../vendor/ceedling/lib/ceedling/par_map.rb | 1 - .../vendor/ceedling/lib/ceedling/plugin.rb | 8 +- .../vendor/ceedling/lib/ceedling/plugin_builder.rb | 4 +- .../ceedling/lib/ceedling/plugin_reportinator.rb | 40 +- .../lib/ceedling/plugin_reportinator_helper.rb | 10 +- .../ceedling/preprocessinator_includes_handler.rb | 2 +- .../lib/ceedling/project_config_manager.rb | 2 +- .../vendor/ceedling/lib/ceedling/rake_utils.rb | 2 +- .../vendor/ceedling/lib/ceedling/reportinator.rb | 4 +- .../vendor/ceedling/lib/ceedling/rules_cmock.rake | 2 +- .../ceedling/lib/ceedling/rules_preprocess.rake | 5 +- .../ceedling/lib/ceedling/rules_release.rake | 1 - .../ceedling/rules_release_deep_dependencies.rake | 3 +- .../vendor/ceedling/lib/ceedling/rules_tests.rake | 1 - .../ceedling/rules_tests_deep_dependencies.rake | 1 - .../vendor/ceedling/lib/ceedling/setupinator.rb | 8 +- .../vendor/ceedling/lib/ceedling/stream_wrapper.rb | 2 +- .../vendor/ceedling/lib/ceedling/streaminator.rb | 2 +- .../ceedling/lib/ceedling/streaminator_helper.rb | 2 +- .../vendor/ceedling/lib/ceedling/system_utils.rb | 6 +- .../vendor/ceedling/lib/ceedling/task_invoker.rb | 20 +- .../vendor/ceedling/lib/ceedling/tasks_base.rake | 1 - .../ceedling/lib/ceedling/tasks_filesystem.rake | 2 - .../ceedling/lib/ceedling/tasks_release.rake | 11 +- .../vendor/ceedling/lib/ceedling/tasks_tests.rake | 1 - .../ceedling/lib/ceedling/test_invoker_helper.rb | 8 +- .../vendor/ceedling/plugins/beep/lib/beep.rb | 1 - .../vendor/ceedling/plugins/bullseye/README.md | 2 +- .../ceedling/plugins/bullseye/assets/template.erb | 1 - .../ceedling/plugins/bullseye/lib/bullseye.rb | 26 +- .../ceedling/plugins/colour_report/README.md | 2 +- .../plugins/command_hooks/lib/command_hooks.rb | 1 - .../plugins/compile_commands_json/README.md | 2 +- .../plugins/fake_function_framework/Rakefile | 2 +- .../examples/fff_example/project.yml | 2 +- .../examples/fff_example/src/display.c | 2 +- .../lib/fff_mock_generator.rb | 2 +- .../spec/fff_mock_header_generator_spec.rb | 2 +- .../spec/fff_mock_source_generator_spec.rb | 2 +- .../spec/header_generator.rb | 2 +- .../fake_function_framework/src/fff_unity_helper.h | 2 +- .../ceedling/plugins/gcov/assets/template.erb | 1 - .../plugins/gcov/lib/reportinator_helper.rb | 2 +- .../ceedling/plugins/json_tests_report/README.md | 4 +- .../json_tests_report/lib/json_tests_report.rb | 4 +- .../ceedling/plugins/module_generator/README.md | 4 +- .../module_generator/config/module_generator.yml | 2 +- .../stdout_gtestlike_tests_report/README.md | 4 +- .../plugins/stdout_ide_tests_report/README.md | 2 +- .../plugins/stdout_pretty_tests_report/README.md | 2 +- .../stdout_pretty_tests_report/assets/template.erb | 1 - .../lib/stdout_pretty_tests_report.rb | 8 +- .../vendor/ceedling/plugins/subprojects/README.md | 14 +- .../ceedling/plugins/subprojects/subprojects.rake | 3 +- .../plugins/teamcity_tests_report/README.md | 2 +- .../ceedling/vendor/c_exception/lib/CException.c | 1 - .../ceedling/vendor/c_exception/lib/meson.build | 2 +- .../vendor/ceedling/vendor/cmock/src/cmock.c | 1 - .../vendor/ceedling/vendor/cmock/src/meson.build | 2 +- .../vendor/ceedling/vendor/diy/lib/diy.rb | 60 +- .../vendor/ceedling/vendor/diy/lib/diy/factory.rb | 5 +- .../ceedling/vendor/unity/auto/generate_config.yml | 2 +- .../vendor/ceedling/vendor/unity/src/meson.build | 2 +- tools/build_board.py | 2 +- tools/build_utils.py | 2 +- tools/iar_template.ipcf | 2 +- tools/mksunxi.py | 2 +- tools/pcapng_to_corpus.py | 10 +- tools/usb_drivers/tinyusb_win_usbser.inf | 2 +- 581 files changed, 2553 insertions(+), 2694 deletions(-) (limited to 'docs/reference') diff --git a/.gitattributes b/.gitattributes index 2342decc3..140ae8929 100644 --- a/.gitattributes +++ b/.gitattributes @@ -1,10 +1,10 @@ # Set the default behavior, in case people don't have core.autocrlf set. * text=auto -*.c text -*.cpp text +*.c text +*.cpp text *.h text -*.icf text +*.icf text *.js text *.json text *.ld text diff --git a/.github/ISSUE_TEMPLATE/bug_report.yml b/.github/ISSUE_TEMPLATE/bug_report.yml index 8c39b95e1..dc5f0ee16 100644 --- a/.github/ISSUE_TEMPLATE/bug_report.yml +++ b/.github/ISSUE_TEMPLATE/bug_report.yml @@ -54,7 +54,7 @@ body: Exact steps in chronological order, details should be specific e.g if you use a command/script to test with, please post it as well. 1. Go to '...' 2. Click on '....' - 3. See error + 3. See error validations: required: true @@ -63,9 +63,9 @@ body: label: Debug Log as txt file placeholder: | Attach your debug log txt file here, where the issue occurred, best with comments to explain the actual events. - + Note1: Please DO NOT paste your lengthy log contents here since it hurts the readability. - Note2: To enable logging, add `LOG=3` to to the make command if building with stock examples or set `CFG_TUSB_DEBUG=3` in your tusb_config.h. + Note2: To enable logging, add `LOG=3` to to the make command if building with stock examples or set `CFG_TUSB_DEBUG=3` in your tusb_config.h. More information can be found at [example's readme](https://github.com/hathach/tinyusb/blob/master/docs/getting_started.md) validations: required: false diff --git a/.github/workflows/trigger.yml b/.github/workflows/trigger.yml index 11e58d86c..86c699dac 100644 --- a/.github/workflows/trigger.yml +++ b/.github/workflows/trigger.yml @@ -43,7 +43,7 @@ jobs: if [ -n "$(git status --porcelain)" ]; then git add . git commit --message "Update from https://github.com/$GITHUB_REPOSITORY/commit/$GITHUB_SHA" - git push + git push fi - name: Create tinyusb_src Release @@ -53,7 +53,7 @@ jobs: cd tinyusb_src git tag ${{ github.event.release.tag_name }} git push origin ${{ github.event.release.tag_name }} - + # Send POST reqwuest to release https://docs.github.com/en/rest/reference/repos#create-a-release bb="For release note, please checkout https://github.com/hathach/tinyusb/releases/tag/${{ github.event.release.tag_name }}" curl -X POST -H "Authorization: token ${{ secrets.API_TOKEN_GITHUB }}" -H "Accept: application/vnd.github.v3+json" --data '{"tag_name": "${{ github.event.release.tag_name }}", "name": "${{ github.event.release.name }}", "body": "$bb", "draft": ${{ github.event.release.draft }}, "prerelease": ${{ github.event.release.prerelease }}}' https://api.github.com/repos/hathach/tinyusb_src/releases diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml index ea2372f07..976f04e63 100644 --- a/.pre-commit-config.yaml +++ b/.pre-commit-config.yaml @@ -13,11 +13,11 @@ repos: - repo: local hooks: - - id: codespell - name: codespell - entry: codespell - types_or: [c, header] - language: system + #- id: codespell + # name: codespell + # entry: codespell + # types_or: [c, header] + # language: system - id: unit-test name: unit-test diff --git a/.readthedocs.yaml b/.readthedocs.yaml index e83cd90fd..1421b397a 100644 --- a/.readthedocs.yaml +++ b/.readthedocs.yaml @@ -15,4 +15,3 @@ python: submodules: include: [] recursive: false - \ No newline at end of file diff --git a/docs/assets/stack.svg b/docs/assets/stack.svg index 85fe35e96..ed46c8649 100644 --- a/docs/assets/stack.svg +++ b/docs/assets/stack.svg @@ -1 +1 @@ - \ No newline at end of file + diff --git a/docs/contributing/code_of_conduct.rst b/docs/contributing/code_of_conduct.rst index b52bf14c5..82627099f 120000 --- a/docs/contributing/code_of_conduct.rst +++ b/docs/contributing/code_of_conduct.rst @@ -1 +1 @@ -../../CODE_OF_CONDUCT.rst \ No newline at end of file +../../CODE_OF_CONDUCT.rst diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index 451e3dace..ca715cb58 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -15,7 +15,7 @@ Changelog - Fix tu_fifo memory overflown when repeatedly write to overwritable fifo (accumulated more than 2 depths) - Better support for IAR (ARM) with ci build check for stm32 mcus. - Fix Windows build for some mingw gnu make situations - + Controller Driver (DCD & HCD) ----------------------------- @@ -27,7 +27,7 @@ Controller Driver (DCD & HCD) - Fix endpoint internal state when closed - Fix reception of large ISO packets -- [rp2040] +- [rp2040] - [dcd] Implement workaround for Errata 15. This enable SOF when bulk-in endpoint is in use and reduce its bandwidth to only 80% - [hcd] Fix shared irq slots filling up when hcd_init() is called multiple times @@ -51,7 +51,7 @@ Device Stack - Support port name strings - fix MS Header wTotalLength computation - + - [HID] - Add FIDO descriptor template @@ -60,7 +60,7 @@ Device Stack - [CDC] - Fix autoflush for FIFO < MPS - - Fix tx fifo memory overflown when DTR is not set and tud_cdc_write() is called repeatedly with large enough data + - Fix tx fifo memory overflown when DTR is not set and tud_cdc_write() is called repeatedly with large enough data - [USBTMC] Fix packet size with highspeed @@ -100,14 +100,14 @@ Controller Driver (DCD & HCD) - Fix overwrite with grstctl when disable endpoint - [EHCI] Fix an issue with EHCI driver - [msp430] Fix for possible bug in msp430-elf-gcc 9.3.0 -- [nrf5x] Fix DMA access race condition using atomic function +- [nrf5x] Fix DMA access race condition using atomic function - [pic32] Fix PIC32 santiy - [rp2040] - Add PICO-PIO-USB as controller (device/host) support for rp2040 - Use shared IRQ handlers, so user can also hook the USB IRQ - Fix resumed signal not reported to device stack -- [stm32fsdev] Add support for stm32wb55 +- [stm32fsdev] Add support for stm32wb55 Device Stack ------------ @@ -159,7 +159,7 @@ Controller Driver (DCD & HCD) - [F1C100s] Add new DCD for Allwinner F1C100s family - [PIC32MZ] Add new DCD for PIC32MZ - [nRF] Fix/Enhance various race condition with: EASY DMA, request HFXO, EPOUT -- [ChipIdea] rename Transdimension to more popular ChipIdea Highspeed, +- [ChipIdea] rename Transdimension to more popular ChipIdea Highspeed, - [RP2040] various update/fix for hcd/dcd - [FT9XX] new DCD port for Bridgetek FT90x and FT93x devices - [DA1469X] Fix resume @@ -246,7 +246,7 @@ RP2040 ^^^^^^ - Add RP2040 suspend & resume support -- Implement double buffer for both host and device (#891). However device EPOUT is still single buffered due to techinical issue with short packet +- Implement double buffer for both host and device (#891). However device EPOUT is still single buffered due to techinical issue with short packet Device Stack ------------ @@ -267,7 +267,7 @@ DFU ^^^ - Enhance DFU implementation to support multiple alternate interface and better support bwPollTimeout -- Rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU +- Rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU HID ^^^ @@ -287,7 +287,7 @@ UAC2 ^^^^ - Fix bug and enhance of UAC2 - + Vendor ^^^^^^ @@ -479,7 +479,7 @@ Host Controller Driver (HCD) - Move echi/ohci files to portable/ - Rename hcd_lpc18_43 to hcd_transdimension - Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr() - + - Update NXP transdimention hcd_init() to reset controller to host mode - Ported hcd to rt10xx @@ -529,13 +529,13 @@ Device Controller Driver - ESP32-S2: - Add bus suspend and wakeup support - + - SAMD21: - Fix (walkaround) samd21 setup_packet overflow by USB DMA - + - STM32 Synopsys: - Rework USB FIFO allocation scheme and allow RX FIFO size reduction - + - Sony CXD56 - Update Update Spresense SDK to 2.0.2 - Fix dcd issues with setup packets @@ -554,17 +554,17 @@ USB Device - CDC - Allow to transmit data, even if the host does not support control line states i.e set DTR - + - HID - change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64 - + - MIDI - Fix midi sysex sending bug - + - MSC - Invoke only scsi complete callback after status transaction is complete. - Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error. - + - USBTMC - Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu @@ -614,20 +614,20 @@ Device Controller Driver - Fix FIFO flush during stall - Implement dcd_edpt_close() API - Support F105, F107 - + - Enhance STM32 fsdev - Improve dcd fifo allocation - Fix ISTR race condition - Support remap USB IRQ on supported MCUs - Implement dcd_edpt_close() API - + - Enhance NUC 505: enhance set configure behavior - Enhance SAMD - Fix race condition with setup packet - Add SAMD11 option `OPT_MCU_SAMD11` - Add SAME5x option `OPT_MCU_SAME5X` - + - Fix SAMG control data toggle and stall race condition - Enhance nRF @@ -659,7 +659,7 @@ USB Device - `usbd_driver_open()` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver - Add application implemented class driver via `usbd_app_driver_get_cb()` - IAD is handled to assign driver id - + - Added `tud_descriptor_device_qualifier_cb()` callback - Optimize `tu_fifo` bulk write/read transfer - Forward non-std control request to class driver @@ -675,12 +675,12 @@ USB Device - Send zero length packet for end of data when needed - Add `tud_cdc_tx_complete_cb()` callback - Change tud_cdc_n_write_flush() return number of bytes forced to transfer, and flush when writing enough data to fifo - + - MIDI: - Add packet interface - Add multiple jack descriptors - Fix MIDI driver for sysex - + - DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request - Rename some configure macro to make it clear that those are used directly for endpoint transfer @@ -688,7 +688,7 @@ USB Device - CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE - CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE - CFG_TUD_MIDI_EPSIZE to CFG_TUD_MIDI_EP_BUFSIZE - + - HID: - Fix gamepad template descriptor - Add multiple HID interface API @@ -700,7 +700,7 @@ USB Host - Rework USB host stack (still work in progress) - Fix compile error with pipehandle - Rework usbh control and enumeration as non-blocking - + - Improve Hub, MSC, HID host driver Examples @@ -713,7 +713,7 @@ Examples - Enhance `net_lwip_webserver` example - Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both) - Update lwip to STABLE-2_1_2_RELEASE for net_lwip_webserver - + - Added new Audio example: audio_test uac2_headsest New Boards diff --git a/docs/info/contributors.rst b/docs/info/contributors.rst index b3748ccb5..02608919f 120000 --- a/docs/info/contributors.rst +++ b/docs/info/contributors.rst @@ -1 +1 @@ -../../CONTRIBUTORS.rst \ No newline at end of file +../../CONTRIBUTORS.rst diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index e328757ba..ef4a6ba61 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -44,18 +44,18 @@ For your convenience, TinyUSB contains a handful of examples for both host and d $ git clone https://github.com/hathach/tinyusb tinyusb $ cd tinyusb -Some TinyUSB examples also requires external submodule libraries in ``/lib`` such as FreeRTOS, Lightweight IP to build. Run following command to fetch them +Some TinyUSB examples also requires external submodule libraries in ``/lib`` such as FreeRTOS, Lightweight IP to build. Run following command to fetch them .. code-block:: $ git submodule update --init lib -Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for tinyusb, you should download/install it first according to its manufacturer guide. +Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for tinyusb, you should download/install it first according to its manufacturer guide. Build ^^^^^ -To build example, first change directory to an example folder. +To build example, first change directory to an example folder. .. code-block:: @@ -118,7 +118,7 @@ To compile for debugging add ``DEBUG=1``\ , for example Log ~~~ -Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional ``LOG=``. LOG=1 will only print out error message, LOG=2 print more information with on-going events. LOG=3 or higher is not used yet. +Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional ``LOG=``. LOG=1 will only print out error message, LOG=2 print more information with on-going events. LOG=3 or higher is not used yet. .. code-block:: @@ -127,7 +127,7 @@ Should you have an issue running example and/or submitting an bug report. You co Logger ~~~~~~ -By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: +By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: * `LOGGER=rtt`: use `Segger RTT protocol `_ @@ -178,12 +178,12 @@ IAR Project Connection files are provided to import TinyUSB stack into your proj * Take example of STM32F0: - + - You need `stm32l0xx.h`, `startup_stm32f0xx.s`, `system_stm32f0xx.c`. - `STM32L0xx_HAL_Driver` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. -* Open `Tools -> Configure Custom Argument Variables` (Switch to `Global` tab if you want to do it for all your projects) +* Open `Tools -> Configure Custom Argument Variables` (Switch to `Global` tab if you want to do it for all your projects) Click `New Group ...`, name it to `TUSB`, Click `Add Variable ...`, name it to `TUSB_DIR`, change it's value to the path of your TinyUSB stack, for example `C:\\tinyusb` diff --git a/examples/device/audio_4_channel_mic/skip.txt b/examples/device/audio_4_channel_mic/skip.txt index ae9b57f1f..1ee86a485 100644 --- a/examples/device/audio_4_channel_mic/skip.txt +++ b/examples/device/audio_4_channel_mic/skip.txt @@ -1,3 +1,3 @@ mcu:SAMD11 mcu:SAME5X -mcu:SAMG \ No newline at end of file +mcu:SAMG diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index a6af5fd19..26d8c48c5 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Reinhard Panhuber diff --git a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py index 9ab15135d..8312b4e28 100644 --- a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py +++ b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py @@ -31,4 +31,3 @@ if __name__ == '__main__': plt.ylabel('Amplitude') plt.title('MicNode 4 Channel') plt.show() - \ No newline at end of file diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 8929f3057..8bf9eebc4 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index cb321f9a8..f6e10e2ea 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/audio_test/skip.txt b/examples/device/audio_test/skip.txt index ae9b57f1f..1ee86a485 100644 --- a/examples/device/audio_test/skip.txt +++ b/examples/device/audio_test/skip.txt @@ -1,3 +1,3 @@ mcu:SAMD11 mcu:SAME5X -mcu:SAMG \ No newline at end of file +mcu:SAMG diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index 56961e427..f9cc63cdd 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Reinhard Panhuber diff --git a/examples/device/audio_test/src/plot_audio_samples.py b/examples/device/audio_test/src/plot_audio_samples.py index 2303df3d0..1504684a6 100644 --- a/examples/device/audio_test/src/plot_audio_samples.py +++ b/examples/device/audio_test/src/plot_audio_samples.py @@ -32,7 +32,6 @@ if __name__ == '__main__': plt.ylabel('Amplitude') plt.title('MicNode') plt.show() - + samples = np.array(myrecording) np.savetxt('Output.csv', samples, delimiter=",", fmt='%s') - \ No newline at end of file diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index da3e203d7..891e90802 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt index cb321f9a8..f6e10e2ea 100644 --- a/examples/device/audio_test_multi_rate/CMakeLists.txt +++ b/examples/device/audio_test_multi_rate/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/audio_test_multi_rate/skip.txt b/examples/device/audio_test_multi_rate/skip.txt index ae9b57f1f..1ee86a485 100644 --- a/examples/device/audio_test_multi_rate/skip.txt +++ b/examples/device/audio_test_multi_rate/skip.txt @@ -1,3 +1,3 @@ mcu:SAMD11 mcu:SAME5X -mcu:SAMG \ No newline at end of file +mcu:SAMG diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 0e11a509b..4dd53dd34 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Reinhard Panhuber @@ -165,7 +165,7 @@ bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const * p_reque (void)rhport; //uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); - + // Clear buffer when streaming format is changed if(alt != 0) { @@ -257,7 +257,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * return false; } } - + // Clock Source unit if ( entityID == UAC2_ENTITY_CLOCK ) { @@ -279,7 +279,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * return false; } } - + return false; // Yet not implemented } @@ -491,7 +491,7 @@ bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uin pData_32[cnt] = (uint32_t)startVal++ << 16U; } } - + return true; } diff --git a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py index 4a5f15a9c..c92e49957 100644 --- a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py +++ b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py @@ -32,7 +32,6 @@ if __name__ == '__main__': plt.ylabel('Amplitude') plt.title('MicNode') plt.show() - + samples = np.array(myrecording) np.savetxt('Output.csv', samples, delimiter=",", fmt='%s') - \ No newline at end of file diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index d8b6511d6..1c8288bce 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -111,7 +111,7 @@ extern "C" { // How many formats are used, need to adjust USB descriptor if changed #define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 - + // 16bit in 16bit slots #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX 2 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index 92e791a72..276bf8aa0 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index 77e2fe6c1..8d8a03e49 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 HiFiPhile @@ -99,4 +99,4 @@ TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) -#endif \ No newline at end of file +#endif diff --git a/examples/device/board_test/src/CMakeLists.txt b/examples/device/board_test/src/CMakeLists.txt index e4e1f4e9a..37625f441 100644 --- a/examples/device/board_test/src/CMakeLists.txt +++ b/examples/device/board_test/src/CMakeLists.txt @@ -2,7 +2,7 @@ idf_component_register(SRCS "main.c" INCLUDE_DIRS "." REQUIRES freertos soc) - + file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake) if(EXISTS ${board_cmake}) diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 0289ca15f..e8e393717 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 0264f0566..c0296191b 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 4eb8c7c27..8be404cc9 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/cdc_msc/skip.txt b/examples/device/cdc_msc/skip.txt index d844feae8..eadb6e74a 100644 --- a/examples/device/cdc_msc/skip.txt +++ b/examples/device/cdc_msc/skip.txt @@ -1 +1 @@ -mcu:SAMD11 \ No newline at end of file +mcu:SAMD11 diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index c83299e59..207dd728c 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index e67e381ce..f8f37a577 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 6b59ed50f..44c849277 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index cfb14aa2b..0e8a24d02 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index a895f4738..707c8d578 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 30a712275..822442724 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index bd9a91c27..4ec2fa31d 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/dynamic_configuration/skip.txt b/examples/device/dynamic_configuration/skip.txt index d844feae8..eadb6e74a 100644 --- a/examples/device/dynamic_configuration/skip.txt +++ b/examples/device/dynamic_configuration/skip.txt @@ -1 +1 @@ -mcu:SAMD11 \ No newline at end of file +mcu:SAMD11 diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 33a603343..90794e979 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index e8cb03fdd..27856a1a4 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 092229b99..0590bd679 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/hid_boot_interface/CMakeLists.txt +++ b/examples/device/hid_boot_interface/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/hid_boot_interface/Makefile b/examples/device/hid_boot_interface/Makefile index d58a539e8..b3f2cc588 100644 --- a/examples/device/hid_boot_interface/Makefile +++ b/examples/device/hid_boot_interface/Makefile @@ -8,7 +8,7 @@ INC += \ EXAMPLE_SOURCE = \ src/main.c \ src/usb_descriptors.c - + SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) include ../../rules.mk diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index b13428041..1a155996a 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index a0d7e9f15..10345ab41 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.h b/examples/device/hid_boot_interface/src/usb_descriptors.h index 57cf0e2c0..6fee9e223 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.h +++ b/examples/device/hid_boot_interface/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 05315f266..4edb045c2 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index 2988baee2..347bbf29a 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite/src/usb_descriptors.h b/examples/device/hid_composite/src/usb_descriptors.h index ca8925ad9..e733d31dd 100644 --- a/examples/device/hid_composite/src/usb_descriptors.h +++ b/examples/device/hid_composite/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 7c9619c4b..ca02af100 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index 4df12d3db..30f327d5e 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.h b/examples/device/hid_composite_freertos/src/usb_descriptors.h index ca8925ad9..e733d31dd 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.h +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/hid_generic_inout/hid_test.js b/examples/device/hid_generic_inout/hid_test.js index daa958fd5..16bc723e2 100644 --- a/examples/device/hid_generic_inout/hid_test.js +++ b/examples/device/hid_generic_inout/hid_test.js @@ -48,7 +48,7 @@ if( deviceInfo ) { function anySupportedBoard(d) { - + for (var key in boards) { if (boards.hasOwnProperty(key)) { if (isDevice(boards[key],d)) { @@ -65,4 +65,3 @@ function isDevice(board,d){ // product id 0xff is matches all return d.vendorId==board[0] && (d.productId==board[1] || board[1] == 0xFFFF); } - diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 5b7daf118..6649b49b5 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index cd4838407..8377a0f47 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index 3310348bd..66fa72063 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index c84a873b1..4845dcf57 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index 9e834ae21..9188ab06c 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/msc_dual_lun/skip.txt b/examples/device/msc_dual_lun/skip.txt index 3549c702a..47e561cf0 100644 --- a/examples/device/msc_dual_lun/skip.txt +++ b/examples/device/msc_dual_lun/skip.txt @@ -1,2 +1,2 @@ mcu:SAMD11 -mcu:MKL25ZXX \ No newline at end of file +mcu:MKL25ZXX diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index 96790d20c..0a7284939 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c index 2b773b43b..b1047acdb 100644 --- a/examples/device/msc_dual_lun/src/msc_disk_dual.c +++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index d8dbb5ce3..2de81111c 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 9fe1a325e..5f1e37931 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -80,4 +80,4 @@ if (EXISTS ${TOP}/lib/lwip/src) # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) -endif() \ No newline at end of file +endif() diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 68761b058..b0e5235ac 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -7,4 +7,4 @@ mcu:STM32L0 mcu:MKL25ZXX family:broadcom_64bit family:broadcom_32bit -board:curiosity_nano \ No newline at end of file +board:curiosity_nano diff --git a/examples/device/net_lwip_webserver/src/arch/cc.h b/examples/device/net_lwip_webserver/src/arch/cc.h index 56a0cacf7..9f30b91cb 100644 --- a/examples/device/net_lwip_webserver/src/arch/cc.h +++ b/examples/device/net_lwip_webserver/src/arch/cc.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, @@ -11,21 +11,21 @@ * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. + * derived from this software without specific prior written permission. * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. - * + * * Author: Adam Dunkels * */ @@ -42,7 +42,7 @@ typedef int sys_prot_t; #if defined (__ICCARM__) #define PACK_STRUCT_BEGIN -#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_STRUCT #define PACK_STRUCT_END #define PACK_STRUCT_FIELD(x) x #define PACK_STRUCT_USE_INCLUDES @@ -50,7 +50,7 @@ typedef int sys_prot_t; #elif defined (__CC_ARM) #define PACK_STRUCT_BEGIN __packed -#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_STRUCT #define PACK_STRUCT_END #define PACK_STRUCT_FIELD(x) x diff --git a/examples/device/net_lwip_webserver/src/lwipopts.h b/examples/device/net_lwip_webserver/src/lwipopts.h index a215017c7..336c9243d 100644 --- a/examples/device/net_lwip_webserver/src/lwipopts.h +++ b/examples/device/net_lwip_webserver/src/lwipopts.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, @@ -11,21 +11,21 @@ * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. + * derived from this software without specific prior written permission. * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. - * + * * Author: Simon Goldschmidt * */ diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 33b4d38b6..88081ffe2 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Peter Lawrence @@ -39,7 +39,7 @@ and likely their manufacturer has not tested such functionality. Some code work The smartphone may only have an ECM driver, but refuse to automatically pick ECM (unlike the OSes above); try modifying ./examples/devices/net_lwip_webserver/usb_descriptors.c so that CONFIG_ID_ECM is default. -The smartphone may be artificially picky about which Ethernet MAC address to recognize; if this happens, +The smartphone may be artificially picky about which Ethernet MAC address to recognize; if this happens, try changing the first byte of tud_network_mac_address[] below from 0x02 to 0x00 (clearing bit 1). */ @@ -170,7 +170,7 @@ bool dns_query_proc(const char *name, ip4_addr_t *addr) bool tud_network_recv_cb(const uint8_t *src, uint16_t size) { - /* this shouldn't happen, but if we get another packet before + /* this shouldn't happen, but if we get another packet before parsing the previous, we must signal our inability to accept it */ if (received_frame) return false; diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index bee51790a..3c0ed3db7 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -77,7 +77,7 @@ tusb_desc_device_t const desc_device = .bDeviceClass = TUSB_CLASS_MISC, .bDeviceSubClass = MISC_SUBCLASS_COMMON, .bDeviceProtocol = MISC_PROTOCOL_IAD, - + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, .idVendor = 0xCafe, diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 01707d51b..bafd40d34 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg @@ -176,7 +176,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t rangef.subrange[i].bRes = 0; TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes); } - + return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &rangef, sizeof(rangef)); } } diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index 07c86b903..0a0b4c602 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Ha Thach (tinyusb.org) diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index 342b4fac1..5525c916a 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenbreg diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index c49603c26..b4678dc5e 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 6945d8743..da7f0418a 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/usbtmc/visaQuery.py b/examples/device/usbtmc/visaQuery.py index c4e5ad2b9..ca65daf97 100644 --- a/examples/device/usbtmc/visaQuery.py +++ b/examples/device/usbtmc/visaQuery.py @@ -36,8 +36,8 @@ def test_trig(): time.sleep(0.3) # SRQ may have some delay assert (inst.read_stb() & 0x40), "SRQ not set after 0.3 seconds" assert (inst.read_stb() == 0) - - + + def test_mav(): inst.write("delay 50") inst.read_stb() # clear STB @@ -45,15 +45,15 @@ def test_mav(): inst.write("123") time.sleep(0.3) assert (inst.read_stb() & 0x10), "MAV not set after 0.5 seconds" - + rsp = inst.read() assert(rsp == "123\r\n") - - + + def test_srq(): assert (inst.read_stb() == 0) inst.write("123") - + #inst.enable_event(pyvisa.constants.VI_EVENT_SERVICE_REQ, pyvisa.constants.VI_QUEUE) #waitrsp = inst.wait_on_event(pyvisa.constants.VI_EVENT_SERVICE_REQ, 5000) #inst.discard_events(pyvisa.constants.VI_EVENT_SERVICE_REQ, pyvisa.constants.VI_QUEUE) @@ -64,7 +64,7 @@ def test_srq(): assert (stb == 0x50),msg assert (inst.read_stb() == 0x10), "SRQ set at second read!" - + rsp = inst.read() assert(rsp == "123\r\n") @@ -110,7 +110,7 @@ def test_abort_in(): inst.timeout = 800 y = inst.read() assert(y == "xxx\r\n") - + def test_indicate(): # perform indicator pulse usb_iface = inst.get_visa_attribute(pyvisa.constants.VI_ATTR_USB_INTFC_NUM) @@ -120,8 +120,8 @@ def test_indicate(): assert(retv == b'\x01') else: assert((retv[1] == pyvisa.constants.StatusCode(0)) and (retv[0] == b'\x01')), f"indicator pulse failed: retv={retv}" - - + + def test_multi_read(): old_chunk_size = inst.chunk_size longstr = "0123456789abcdefghijklmnopqrstuvwxyz" * 10 @@ -133,7 +133,7 @@ def test_multi_read(): y = inst.read() assert (x + "\r\n" == y) #inst.chunk_size = old_chunk_size - + def test_stall_ep0(): usb_iface = inst.get_visa_attribute(pyvisa.constants.VI_ATTR_USB_INTFC_NUM) inst.read_stb() @@ -143,7 +143,7 @@ def test_stall_ep0(): assert(False) except pyvisa.VisaIOError: pass - + assert (inst.read_stb() == 0) @@ -153,7 +153,7 @@ print(reslist) if (len(reslist) == 0): sys.exit() - + inst = rm.open_resource(reslist[0]); inst.timeout = 3000 diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index b92a2b804..f1ef247e1 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -31,4 +31,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 3ceebe821..08db1b00f 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index 0cf772010..af18d15d1 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/video_capture/src/usb_descriptors.h b/examples/device/video_capture/src/usb_descriptors.h index f1ed3c8e9..93f148a82 100644 --- a/examples/device/video_capture/src/usb_descriptors.h +++ b/examples/device/video_capture/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenbreg diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 604d30a83..24456f9f3 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 99f5caaf9..b2593001c 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/webusb_serial/src/usb_descriptors.h b/examples/device/webusb_serial/src/usb_descriptors.h index 19f1ff3f3..a1c4a2cf1 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.h +++ b/examples/device/webusb_serial/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index bd7870274..817c63c70 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c index 6b0a89127..63b6bc603 100644 --- a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 51cab2de0..bb7fa850e 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index b34810252..23312296f 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index 797d55f8a..e9c9676b8 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -68,4 +68,3 @@ void tuh_msc_umount_cb(uint8_t dev_addr) (void) dev_addr; printf("A MassStorage device is unmounted\r\n"); } - diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 299a3ff10..3380e9246 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index ab2cfd498..40c88a7d3 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index eef28fe12..003e2865b 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/rules.mk b/examples/rules.mk index f8e4001ec..56ad89fd0 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -283,4 +283,4 @@ copy-artifact: $(BIN) # Print out the value of a make variable. # https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile print-%: - @echo $* = $($*) \ No newline at end of file + @echo $* = $($*) diff --git a/hw/bsp/ansi_escape.h b/hw/bsp/ansi_escape.h index 6e62ee20a..15af2f3ab 100644 --- a/hw/bsp/ansi_escape.h +++ b/hw/bsp/ansi_escape.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 14858c2b6..e715bdf2e 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/board.h b/hw/bsp/board.h index 0a10294d0..036556731 100644 --- a/hw/bsp/board.h +++ b/hw/bsp/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h index 1d3565d5c..84a106346 100644 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk index 52e9e45c4..77811d18d 100644 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk @@ -2,4 +2,4 @@ CFLAGS += -mcpu=arm1176jzf-s \ -DBCM_VERSION=2835 \ -DCFG_TUSB_MCU=OPT_MCU_BCM2835 -SUFFIX = +SUFFIX = diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c index f7a11fb49..42ad4b666 100644 --- a/hw/bsp/broadcom_32bit/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h index 1d3565d5c..84a106346 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h index 1d3565d5c..84a106346 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c index f7a11fb49..42ad4b666 100644 --- a/hw/bsp/broadcom_64bit/family.c +++ b/hw/bsp/broadcom_64bit/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index 3b6b03904..f812c922f 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright 2021 Bridgetek Pte Ltd @@ -70,7 +70,7 @@ void board_init(void) board_uart_write(WELCOME_MSG, sizeof(WELCOME_MSG)); #ifdef BOARD_GPIO_LED - gpio_function(BOARD_GPIO_LED, pad_func_0); + gpio_function(BOARD_GPIO_LED, pad_func_0); gpio_idrive(BOARD_GPIO_LED, pad_drive_12mA); gpio_dir(BOARD_GPIO_LED, pad_dir_output); #endif @@ -233,7 +233,7 @@ int board_uart_write(void const *buf, int len) uint32_t board_millis(void) { uint32_t safe_ms; - + CRITICAL_SECTION_BEGIN safe_ms = timer_ms; CRITICAL_SECTION_END @@ -254,4 +254,3 @@ void chip_reboot(void) dbg_memory_copy(0xfe, 0, 0, 255); #endif } - diff --git a/hw/bsp/brtmm90x/family.mk b/hw/bsp/brtmm90x/family.mk index 0ddf47a3a..6df0bfdfe 100644 --- a/hw/bsp/brtmm90x/family.mk +++ b/hw/bsp/brtmm90x/family.mk @@ -5,7 +5,7 @@ SKIP_NANOLIB = 1 # Set to use FT90X prebuilt libraries. FT9XX_PREBUILT_LIBS = 0 ifeq ($(FT9XX_PREBUILT_LIBS),1) -# If the FT90X toolchain is installed on Windows systems then the SDK +# If the FT90X toolchain is installed on Windows systems then the SDK # include files and prebuilt libraries are at: %FT90X_TOOLCHAIN%/hardware FT9XX_SDK = $(FT90X_TOOLCHAIN)/hardware INC += "$(FT9XX_SDK)/include" @@ -21,7 +21,7 @@ endif # Add include files which are within the TinyUSB directory structure. INC += \ - $(TOP)/$(BOARD_PATH) + $(TOP)/$(BOARD_PATH) # Add required C Compiler flags for FT90X. CFLAGS += \ @@ -30,7 +30,7 @@ CFLAGS += \ -fvar-tracking-assignments \ -fmessage-length=0 \ -ffunction-sections \ - -DCFG_TUSB_MCU=OPT_MCU_FT90X + -DCFG_TUSB_MCU=OPT_MCU_FT90X # Maximum USB device speed supported by the board CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED @@ -45,7 +45,7 @@ LDFLAGS += $(addprefix -L,$(LDINC)) \ -Wl,-lc # Additional Source files for FT90X. -SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c +SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c # Linker library. ifneq ($(FT9XX_PREBUILT_LIBS),1) diff --git a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h index 0eab34916..7b488096e 100644 --- a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h +++ b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2023 Ha Thach (tinyusb.org) for Adafruit Industries diff --git a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c index 45fc9e3aa..db3551ca7 100644 --- a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c +++ b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c @@ -36,7 +36,7 @@ static unsigned int tx_produce; static volatile unsigned int tx_consume; void USART1_IRQHandler(void) __attribute__((naked)); -void USART1_IRQHandler(void) { +void USART1_IRQHandler(void) { __asm volatile ("call USART1_IRQHandler_impl; mret"); } @@ -57,7 +57,7 @@ __attribute__((used)) void USART1_IRQHandler_impl(void) void uart_write(char c) { unsigned int tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; - + NVIC_DisableIRQ(USART1_IRQn); if((tx_consume != tx_produce) || (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)) { tx_buf[tx_produce] = c; diff --git a/hw/bsp/ch32v307/ch32v307.ld b/hw/bsp/ch32v307/ch32v307.ld index af7c06615..55bd10cd0 100644 --- a/hw/bsp/ch32v307/ch32v307.ld +++ b/hw/bsp/ch32v307/ch32v307.ld @@ -41,7 +41,7 @@ SECTIONS *(.glue_7t) *(.gnu.linkonce.t.*) . = ALIGN(4); - } >FLASH AT>FLASH + } >FLASH AT>FLASH .fini : { @@ -50,31 +50,31 @@ SECTIONS } >FLASH AT>FLASH PROVIDE( _etext = . ); - PROVIDE( _eitcm = . ); + PROVIDE( _eitcm = . ); .preinit_array : { PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .init_array : { PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .fini_array : { PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .ctors : { /* gcc uses crtbegin.o to find the start of @@ -95,8 +95,8 @@ SECTIONS KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .dtors : { KEEP (*crtbegin.o(.dtors)) @@ -104,17 +104,17 @@ SECTIONS KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) - } >FLASH AT>FLASH + } >FLASH AT>FLASH .dalign : { . = ALIGN(4); PROVIDE(_data_vma = .); - } >RAM AT>FLASH + } >RAM AT>FLASH .dlalign : { - . = ALIGN(4); + . = ALIGN(4); PROVIDE(_data_lma = .); } >FLASH AT>FLASH @@ -145,7 +145,7 @@ SECTIONS *(.sbss*) *(.gnu.linkonce.sb.*) *(.bss*) - *(.gnu.linkonce.b.*) + *(.gnu.linkonce.b.*) *(COMMON*) . = ALIGN(4); PROVIDE( _ebss = .); @@ -156,15 +156,12 @@ SECTIONS .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : { - PROVIDE( _heap_end = . ); + PROVIDE( _heap_end = . ); . = ALIGN(4); PROVIDE(_susrstack = . ); . = . + __stack_size; PROVIDE( _eusrstack = .); __freertos_irq_stack_top = .; - } >RAM + } >RAM } - - - diff --git a/hw/bsp/ch32v307/ch32v30x_conf.h b/hw/bsp/ch32v307/ch32v30x_conf.h index 399feaf68..0b86ad390 100644 --- a/hw/bsp/ch32v307/ch32v30x_conf.h +++ b/hw/bsp/ch32v307/ch32v30x_conf.h @@ -6,7 +6,7 @@ * Description : Library configuration file. * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * SPDX-License-Identifier: Apache-2.0 -*******************************************************************************/ +*******************************************************************************/ #ifndef __CH32V30x_CONF_H #define __CH32V30x_CONF_H @@ -36,8 +36,3 @@ #endif /* __CH32V30x_CONF_H */ - - - - - diff --git a/hw/bsp/ch32v307/ch32v30x_it.c b/hw/bsp/ch32v307/ch32v30x_it.c index d348dd989..c329c5613 100644 --- a/hw/bsp/ch32v307/ch32v30x_it.c +++ b/hw/bsp/ch32v307/ch32v30x_it.c @@ -45,5 +45,3 @@ __attribute__((used)) void HardFault_Handler_impl(void) { } } - - diff --git a/hw/bsp/ch32v307/ch32v30x_it.h b/hw/bsp/ch32v307/ch32v30x_it.h index 42f285edf..f3977a8be 100644 --- a/hw/bsp/ch32v307/ch32v30x_it.h +++ b/hw/bsp/ch32v307/ch32v30x_it.h @@ -14,5 +14,3 @@ #endif /* __CH32V30x_IT_H */ - - diff --git a/hw/bsp/ch32v307/core_riscv.h b/hw/bsp/ch32v307/core_riscv.h index 2e94ec683..a7ce10a00 100644 --- a/hw/bsp/ch32v307/core_riscv.h +++ b/hw/bsp/ch32v307/core_riscv.h @@ -336,7 +336,7 @@ RV_STATIC_INLINE void NVIC_SystemReset(void) } -/* Core_Exported_Functions */ +/* Core_Exported_Functions */ extern uint32_t __get_FFLAGS(void); extern void __set_FFLAGS(uint32_t value); extern uint32_t __get_FRM(void); @@ -377,8 +377,3 @@ extern uint32_t __get_SP(void); #endif - - - - - diff --git a/hw/bsp/ch32v307/system_ch32v30x.c b/hw/bsp/ch32v307/system_ch32v30x.c index 12b18d7b8..23f783df4 100644 --- a/hw/bsp/ch32v307/system_ch32v30x.c +++ b/hw/bsp/ch32v307/system_ch32v30x.c @@ -8,17 +8,17 @@ * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * SPDX-License-Identifier: Apache-2.0 *********************************************************************************/ -#include "ch32v30x.h" +#include "ch32v30x.h" -/* -* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after +/* +* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after * reset the HSI is used as SYSCLK source). -* If none of the define below is enabled, the HSI is used as System clock source. +* If none of the define below is enabled, the HSI is used as System clock source. */ // #define SYSCLK_FREQ_HSE HSE_VALUE -/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ //#define SYSCLK_FREQ_48MHz 48000000 -/* #define SYSCLK_FREQ_56MHz 56000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ //#define SYSCLK_FREQ_72MHz 72000000 //#define SYSCLK_FREQ_96MHz 96000000 //#define SYSCLK_FREQ_120MHz 120000000 @@ -60,7 +60,7 @@ static void SetSysClock(void); #elif defined SYSCLK_FREQ_48MHz static void SetSysClockTo48(void); #elif defined SYSCLK_FREQ_56MHz - static void SetSysClockTo56(void); + static void SetSysClockTo56(void); #elif defined SYSCLK_FREQ_72MHz static void SetSysClockTo72(void); @@ -90,7 +90,7 @@ void SystemInit (void) RCC->CFGR0 &= (uint32_t)0xF8FF0000; #else RCC->CFGR0 &= (uint32_t)0xF0FF0000; -#endif +#endif RCC->CTLR &= (uint32_t)0xFEF6FFFF; RCC->CTLR &= (uint32_t)0xFFFBFFFF; @@ -101,8 +101,8 @@ void SystemInit (void) RCC->INTR = 0x00FF0000; RCC->CFGR2 = 0x00000000; #else - RCC->INTR = 0x009F0000; -#endif + RCC->INTR = 0x009F0000; +#endif SetSysClock(); } @@ -118,18 +118,18 @@ void SystemCoreClockUpdate (void) uint32_t tmp = 0, pllmull = 0, pllsource = 0, Pll_6_5 = 0; tmp = RCC->CFGR0 & RCC_SWS; - + switch (tmp) { case 0x00: SystemCoreClock = HSI_VALUE; break; - case 0x04: + case 0x04: SystemCoreClock = HSE_VALUE; break; - case 0x08: + case 0x08: pllmull = RCC->CFGR0 & RCC_PLLMULL; - pllsource = RCC->CFGR0 & RCC_PLLSRC; + pllsource = RCC->CFGR0 & RCC_PLLSRC; pllmull = ( pllmull >> 18) + 2; #ifdef CH32V30x_D8 @@ -149,7 +149,7 @@ void SystemCoreClockUpdate (void) SystemCoreClock = (HSI_VALUE >> 1) * pllmull; } else - { + { if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET) { SystemCoreClock = (HSE_VALUE >> 1) * pllmull; @@ -167,9 +167,9 @@ void SystemCoreClockUpdate (void) SystemCoreClock = HSI_VALUE; break; } - + tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)]; - SystemCoreClock >>= tmp; + SystemCoreClock >>= tmp; } /********************************************************************* @@ -188,7 +188,7 @@ static void SetSysClock(void) #elif defined SYSCLK_FREQ_48MHz SetSysClockTo48(); #elif defined SYSCLK_FREQ_56MHz - SetSysClockTo56(); + SetSysClockTo56(); #elif defined SYSCLK_FREQ_72MHz SetSysClockTo72(); #elif defined SYSCLK_FREQ_96MHz @@ -199,9 +199,9 @@ static void SetSysClock(void) SetSysClockTo144(); #endif - + /* If none of the define above is enabled, the HSI is used as System clock - * source (default after reset) + * source (default after reset) */ } @@ -218,14 +218,14 @@ static void SetSysClock(void) static void SetSysClockToHSE(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); - + /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -235,20 +235,20 @@ static void SetSysClockToHSE(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; - + /* Select HSE as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; + RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; /* Wait till HSE is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04) @@ -256,11 +256,11 @@ static void SetSysClockToHSE(void) } } else - { + { /* If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_24MHz @@ -275,14 +275,14 @@ static void SetSysClockToHSE(void) static void SetSysClockTo24(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); - + /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -292,13 +292,13 @@ static void SetSysClockTo24(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ - RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; @@ -318,18 +318,18 @@ static void SetSysClockTo24(void) } /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_48MHz @@ -344,14 +344,14 @@ static void SetSysClockTo24(void) static void SetSysClockTo48(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - + + RCC->CTLR |= ((uint32_t)RCC_HSEON); /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -361,14 +361,14 @@ static void SetSysClockTo48(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ - RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; @@ -389,19 +389,19 @@ static void SetSysClockTo48(void) } /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* * If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_56MHz @@ -416,14 +416,14 @@ static void SetSysClockTo48(void) static void SetSysClockTo56(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -433,17 +433,17 @@ static void SetSysClockTo56(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; - + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); @@ -462,19 +462,19 @@ static void SetSysClockTo56(void) /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* * If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_72MHz @@ -489,14 +489,14 @@ static void SetSysClockTo56(void) static void SetSysClockTo72(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); - + /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -506,17 +506,17 @@ static void SetSysClockTo72(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ - RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; - + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); @@ -532,20 +532,20 @@ static void SetSysClockTo72(void) /* Wait till PLL is ready */ while((RCC->CTLR & RCC_PLLRDY) == 0) { - } + } /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* * If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ } } diff --git a/hw/bsp/ch32v307/system_ch32v30x.h b/hw/bsp/ch32v307/system_ch32v30x.h index 0e0ef4e51..ad81058c7 100644 --- a/hw/bsp/ch32v307/system_ch32v30x.h +++ b/hw/bsp/ch32v307/system_ch32v30x.h @@ -7,16 +7,16 @@ * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * SPDX-License-Identifier: Apache-2.0 *******************************************************************************/ -#ifndef __SYSTEM_CH32V30x_H +#ifndef __SYSTEM_CH32V30x_H #define __SYSTEM_CH32V30x_H #ifdef __cplusplus extern "C" { -#endif +#endif extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ -/* System_Exported_Functions */ +/* System_Exported_Functions */ extern void SystemInit(void); extern void SystemCoreClockUpdate(void); @@ -25,6 +25,3 @@ extern void SystemCoreClockUpdate(void); #endif #endif /*__CH32V30x_SYSTEM_H */ - - - diff --git a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c index a4d996810..3abb488f2 100644 --- a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c +++ b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg diff --git a/hw/bsp/da14695_dk_usb/da1469x.ld b/hw/bsp/da14695_dk_usb/da1469x.ld index 96507d6e7..8cc1d9d99 100644 --- a/hw/bsp/da14695_dk_usb/da1469x.ld +++ b/hw/bsp/da14695_dk_usb/da1469x.ld @@ -242,4 +242,3 @@ SECTIONS /* Check that intvect is at the beginning of RAM */ ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") } - diff --git a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c index 13113fb95..abe7f54cb 100644 --- a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c +++ b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg diff --git a/hw/bsp/da1469x_dk_pro/da1469x.ld b/hw/bsp/da1469x_dk_pro/da1469x.ld index 96507d6e7..8cc1d9d99 100644 --- a/hw/bsp/da1469x_dk_pro/da1469x.ld +++ b/hw/bsp/da1469x_dk_pro/da1469x.ld @@ -242,4 +242,3 @@ SECTIONS /* Check that intvect is at the beginning of RAM */ ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") } - diff --git a/hw/bsp/ea4088qs/ea4088qs.c b/hw/bsp/ea4088qs/ea4088qs.c index 7150ed393..ace72fef0 100644 --- a/hw/bsp/ea4088qs/ea4088qs.c +++ b/hw/bsp/ea4088qs/ea4088qs.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/ea4088qs/lpc4088.ld b/hw/bsp/ea4088qs/lpc4088.ld index 4b1cddd6e..5897707f6 100644 --- a/hw/bsp/ea4088qs/lpc4088.ld +++ b/hw/bsp/ea4088qs/lpc4088.ld @@ -11,24 +11,24 @@ MEMORY { /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc64 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x10000 /* 64K bytes (alias RAM) */ - RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc64 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x10000 /* 64K bytes (alias RAM) */ + RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc64 = 0x10000000 ; /* RamLoc64 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc64 = 0x10000000 + 0x10000 ; /* 64K bytes */ - __top_RAM = 0x10000000 + 0x10000 ; /* 64K bytes */ - __base_RamPeriph32 = 0x20000000 ; /* RamPeriph32 */ - __base_RAM2 = 0x20000000 ; /* RAM2 */ - __top_RamPeriph32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc64 = 0x10000000 ; /* RamLoc64 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc64 = 0x10000000 + 0x10000 ; /* 64K bytes */ + __top_RAM = 0x10000000 + 0x10000 ; /* 64K bytes */ + __base_RamPeriph32 = 0x20000000 ; /* RamPeriph32 */ + __base_RAM2 = 0x20000000 ; /* RAM2 */ + __top_RamPeriph32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x20000000 + 0x8000 ; /* 32K bytes */ ENTRY(ResetISR) @@ -72,9 +72,9 @@ SECTIONS } > MFlash512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash512 @@ -88,7 +88,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamPeriph32 */ .data_RAM2 : ALIGN(4) @@ -130,7 +130,7 @@ SECTIONS *(.bss.$RamPeriph32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamPeriph32 + } > RamPeriph32 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -149,13 +149,13 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamPeriph32*) . = ALIGN(4) ; - } > RamPeriph32 + } > RamPeriph32 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc64 @@ -163,11 +163,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc64 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -181,4 +181,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c index f88d3b89e..68bcaa123 100644 --- a/hw/bsp/ea4357/ea4357.c +++ b/hw/bsp/ea4357/ea4357.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/ea4357/lpc4357.ld b/hw/bsp/ea4357/lpc4357.ld index 14a0df328..e3dfbfda1 100644 --- a/hw/bsp/ea4357/lpc4357.ld +++ b/hw/bsp/ea4357/lpc4357.ld @@ -11,44 +11,44 @@ MEMORY { /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } /* Define a symbol for the top of each memory region */ - __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ - __base_Flash = 0x1a000000 ; /* Flash */ - __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ - __base_Flash2 = 0x1b000000 ; /* Flash2 */ - __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ + __base_Flash = 0x1a000000 ; /* Flash */ + __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ + __base_Flash2 = 0x1b000000 ; /* Flash2 */ + __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ + __base_RAM2 = 0x10080000 ; /* RAM2 */ + __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ + __base_RAM4 = 0x20008000 ; /* RAM4 */ + __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ + __base_RAM5 = 0x2000c000 ; /* RAM5 */ + __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) @@ -119,9 +119,9 @@ SECTIONS } > MFlashA512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlashA512 @@ -135,7 +135,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamLoc40 */ .data_RAM2 : ALIGN(4) @@ -216,7 +216,7 @@ SECTIONS *(.bss.$RamLoc40*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 + } > RamLoc40 /* BSS section for RamAHB32 */ .bss_RAM3 : ALIGN(4) @@ -226,7 +226,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 + } > RamAHB32 /* BSS section for RamAHB16 */ .bss_RAM4 : ALIGN(4) @@ -236,7 +236,7 @@ SECTIONS *(.bss.$RamAHB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 + } > RamAHB16 /* BSS section for RamAHB_ETB16 */ .bss_RAM5 : ALIGN(4) @@ -246,7 +246,7 @@ SECTIONS *(.bss.$RamAHB_ETB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -265,7 +265,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamLoc40*) . = ALIGN(4) ; - } > RamLoc40 + } > RamLoc40 /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -273,7 +273,7 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* NOINIT section for RamAHB16 */ .noinit_RAM4 (NOLOAD) : ALIGN(4) @@ -281,7 +281,7 @@ SECTIONS *(.noinit.$RAM4*) *(.noinit.$RamAHB16*) . = ALIGN(4) ; - } > RamAHB16 + } > RamAHB16 /* NOINIT section for RamAHB_ETB16 */ .noinit_RAM5 (NOLOAD) : ALIGN(4) @@ -289,13 +289,13 @@ SECTIONS *(.noinit.$RAM5*) *(.noinit.$RamAHB_ETB16*) . = ALIGN(4) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -303,11 +303,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -321,4 +321,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/ea4357/pca9532.c b/hw/bsp/ea4357/pca9532.c index eae3805c2..150167cde 100644 --- a/hw/bsp/ea4357/pca9532.c +++ b/hw/bsp/ea4357/pca9532.c @@ -57,7 +57,7 @@ static uint16_t ledStateShadow = 0; * Local Functions *****************************************************************************/ -static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) +static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) { I2CM_XFER_T i2cData; @@ -75,7 +75,7 @@ static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) return SUCCESS; } -static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) +static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) { I2CM_XFER_T i2cData; @@ -181,7 +181,7 @@ uint16_t pca9532_getLedState (uint32_t shadow) * A blinking LED may be reported as on or off depending on * its state when reading the Input register. */ - + buf[0] = PCA9532_INPUT0; I2CWrite(PCA9532_I2C_ADDR, buf, 1); diff --git a/hw/bsp/ea4357/pca9532.h b/hw/bsp/ea4357/pca9532.h index 7a7c6e145..f21c1ff09 100644 --- a/hw/bsp/ea4357/pca9532.h +++ b/hw/bsp/ea4357/pca9532.h @@ -48,7 +48,7 @@ #define KEY_MASK 0x000F /* - * MMC Card Detect and MMC Write Protect are mapped to LED4 + * MMC Card Detect and MMC Write Protect are mapped to LED4 * and LED5 on the PCA9532. Please note that WP is active low. */ diff --git a/hw/bsp/esp32s2/boards/CMakeLists.txt b/hw/bsp/esp32s2/boards/CMakeLists.txt index c3c687a70..ff90acbde 100644 --- a/hw/bsp/esp32s2/boards/CMakeLists.txt +++ b/hw/bsp/esp32s2/boards/CMakeLists.txt @@ -8,5 +8,5 @@ include("${BOARD}/board.cmake") target_include_directories(${COMPONENT_TARGET} PUBLIC "${TOP}/hw" - "${TOP}/src" + "${TOP}/src" ) diff --git a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake index d33962676..e39ceb887 100644 --- a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake +++ b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h index 43e00901d..1f8dc2cea 100644 --- a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h +++ b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake index d33962676..e39ceb887 100644 --- a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake +++ b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h index 16e30b685..084a7aaf2 100644 --- a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h +++ b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake index d5c17b9be..16b0e9cdd 100644 --- a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake +++ b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h index 49a2474bc..2ec80ef47 100644 --- a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h +++ b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/esp32s2.c b/hw/bsp/esp32s2/boards/esp32s2.c index a7ca82deb..015d8305b 100644 --- a/hw/bsp/esp32s2/boards/esp32s2.c +++ b/hw/bsp/esp32s2/boards/esp32s2.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -150,4 +150,3 @@ int board_uart_write(void const * buf, int len) (void) buf; (void) len; return 0; } - diff --git a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake index d5c17b9be..16b0e9cdd 100644 --- a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake +++ b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h index 6bb44f76d..0acb9c439 100644 --- a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h +++ b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake b/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake index d5c17b9be..16b0e9cdd 100644 --- a/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake +++ b/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/espressif_saola_1/board.h b/hw/bsp/esp32s2/boards/espressif_saola_1/board.h index f450b9a8b..e068efef9 100644 --- a/hw/bsp/esp32s2/boards/espressif_saola_1/board.h +++ b/hw/bsp/esp32s2/boards/espressif_saola_1/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt b/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt index 6d0fcbc86..8266c5a1c 100644 --- a/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt +++ b/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt @@ -5,4 +5,3 @@ idf_component_register(SRCS "${component_srcs}" PRIV_INCLUDE_DIRS "" PRIV_REQUIRES "driver" REQUIRES "") - diff --git a/hw/bsp/esp32s2/family.cmake b/hw/bsp/esp32s2/family.cmake index f3d41d041..0973adcac 100644 --- a/hw/bsp/esp32s2/family.cmake +++ b/hw/bsp/esp32s2/family.cmake @@ -1,7 +1,7 @@ cmake_minimum_required(VERSION 3.5) # Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components") +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s2) set(FAMILY_MCUS ESP32S2) diff --git a/hw/bsp/esp32s2/family.mk b/hw/bsp/esp32s2/family.mk index b95098e15..fba0f038b 100644 --- a/hw/bsp/esp32s2/family.mk +++ b/hw/bsp/esp32s2/family.mk @@ -21,4 +21,3 @@ UF2_FAMILY_ID = 0xbfdd4eee $(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin @echo CREATE $@ $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ - diff --git a/hw/bsp/esp32s3/boards/CMakeLists.txt b/hw/bsp/esp32s3/boards/CMakeLists.txt index e1b921ae9..311c6e900 100644 --- a/hw/bsp/esp32s3/boards/CMakeLists.txt +++ b/hw/bsp/esp32s3/boards/CMakeLists.txt @@ -10,5 +10,5 @@ idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PAT target_include_directories(${COMPONENT_TARGET} PUBLIC "${FREERTOS_ORIG_INCLUDE_PATH}" "${TOP}/hw" - "${TOP}/src" + "${TOP}/src" ) diff --git a/hw/bsp/esp32s3/boards/esp32s3.c b/hw/bsp/esp32s3/boards/esp32s3.c index a7ca82deb..015d8305b 100644 --- a/hw/bsp/esp32s3/boards/esp32s3.c +++ b/hw/bsp/esp32s3/boards/esp32s3.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -150,4 +150,3 @@ int board_uart_write(void const * buf, int len) (void) buf; (void) len; return 0; } - diff --git a/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake b/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake index 8996ff9dc..2bff4f836 100644 --- a/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake @@ -4,4 +4,4 @@ target_include_directories(${COMPONENT_LIB} PRIVATE .) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s3/boards/espressif_addax_1/board.h b/hw/bsp/esp32s3/boards/espressif_addax_1/board.h index fff24ba44..d4690f732 100644 --- a/hw/bsp/esp32s3/boards/espressif_addax_1/board.h +++ b/hw/bsp/esp32s3/boards/espressif_addax_1/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake index 8996ff9dc..2bff4f836 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake @@ -4,4 +4,4 @@ target_include_directories(${COMPONENT_LIB} PRIVATE .) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h index c7940c56e..fe33b5c43 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake index 8996ff9dc..2bff4f836 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake @@ -4,4 +4,4 @@ target_include_directories(${COMPONENT_LIB} PRIVATE .) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h index c7940c56e..fe33b5c43 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt b/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt index 6d0fcbc86..8266c5a1c 100644 --- a/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt +++ b/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt @@ -5,4 +5,3 @@ idf_component_register(SRCS "${component_srcs}" PRIV_INCLUDE_DIRS "" PRIV_REQUIRES "driver" REQUIRES "") - diff --git a/hw/bsp/esp32s3/family.cmake b/hw/bsp/esp32s3/family.cmake index 511dd58bb..0bcad035e 100644 --- a/hw/bsp/esp32s3/family.cmake +++ b/hw/bsp/esp32s3/family.cmake @@ -1,7 +1,7 @@ cmake_minimum_required(VERSION 3.5) # Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components") +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s3) set(FAMILY_MCUS ESP32S3) diff --git a/hw/bsp/esp32s3/family.mk b/hw/bsp/esp32s3/family.mk index cf153ffc2..d82a1c969 100644 --- a/hw/bsp/esp32s3/family.mk +++ b/hw/bsp/esp32s3/family.mk @@ -23,4 +23,3 @@ UF2_FAMILY_ID = 0xc47e5767 $(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin @echo CREATE $@ $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ - diff --git a/hw/bsp/f1c100s/README.md b/hw/bsp/f1c100s/README.md index 4aa1e153b..f7a863c34 100644 --- a/hw/bsp/f1c100s/README.md +++ b/hw/bsp/f1c100s/README.md @@ -17,4 +17,4 @@ Flash: `make BOARD=f1c100s flash` will write the image to SPI flash, and then re ## TODO -* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?) \ No newline at end of file +* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?) diff --git a/hw/bsp/f1c100s/board.h b/hw/bsp/f1c100s/board.h index 238ac796d..0ef9a1700 100644 --- a/hw/bsp/f1c100s/board.h +++ b/hw/bsp/f1c100s/board.h @@ -1 +1 @@ -// Nothing valuable here \ No newline at end of file +// Nothing valuable here diff --git a/hw/bsp/f1c100s/board.mk b/hw/bsp/f1c100s/board.mk index 5fe26a9ea..9062483b0 100644 --- a/hw/bsp/f1c100s/board.mk +++ b/hw/bsp/f1c100s/board.mk @@ -32,7 +32,7 @@ SRC_C += \ $(MCU_DIR)/machine/sys-spi-flash.c \ $(MCU_DIR)/machine/f1c100s-intc.c \ $(MCU_DIR)/lib/malloc.c \ - $(MCU_DIR)/lib/printf.c + $(MCU_DIR)/lib/printf.c SRC_S += \ $(MCU_DIR)/machine/start.S \ @@ -47,6 +47,6 @@ INC += \ flash: flash-xfel exec: $(BUILD)/$(PROJECT).bin - xfel ddr + xfel ddr xfel write 0x80000000 $< - xfel exec 0x80000000 \ No newline at end of file + xfel exec 0x80000000 diff --git a/hw/bsp/f1c100s/f1c100s.c b/hw/bsp/f1c100s/f1c100s.c index d45072ecb..5dcae33f7 100644 --- a/hw/bsp/f1c100s/f1c100s.c +++ b/hw/bsp/f1c100s/f1c100s.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -125,6 +125,6 @@ static void timer_init(void) { f1c100s_intc_set_isr(F1C100S_IRQ_TIMER0, timer_handler); f1c100s_intc_enable_irq(F1C100S_IRQ_TIMER0); } -#else +#else static void timer_init(void) { } #endif diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 601cd54f5..08bb20bc3 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -139,4 +139,4 @@ if (NOT TARGET _family_support_marker) # save it in case of re-inclusion set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") -endif() \ No newline at end of file +endif() diff --git a/hw/bsp/fomu/boards/fomu/board.mk b/hw/bsp/fomu/boards/fomu/board.mk index 8ced11412..b5545c89a 100644 --- a/hw/bsp/fomu/boards/fomu/board.mk +++ b/hw/bsp/fomu/boards/fomu/board.mk @@ -1 +1 @@ -# place holder \ No newline at end of file +# place holder diff --git a/hw/bsp/fomu/fomu.c b/hw/bsp/fomu/fomu.c index 33c630303..e079e7c5b 100644 --- a/hw/bsp/fomu/fomu.c +++ b/hw/bsp/fomu/fomu.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/fomu/include/hw/common.h b/hw/bsp/fomu/include/hw/common.h index 6a97ca2e9..b902bc4f2 100644 --- a/hw/bsp/fomu/include/hw/common.h +++ b/hw/bsp/fomu/include/hw/common.h @@ -30,4 +30,4 @@ static inline uint32_t csr_readl(uint32_t addr) { return *(volatile uint32_t *)addr; } -#endif /* _HW_COMMON_H_ */ \ No newline at end of file +#endif /* _HW_COMMON_H_ */ diff --git a/hw/bsp/fomu/include/irq.h b/hw/bsp/fomu/include/irq.h index a82218907..dc96c228d 100644 --- a/hw/bsp/fomu/include/irq.h +++ b/hw/bsp/fomu/include/irq.h @@ -68,4 +68,4 @@ static inline unsigned int irq_pending(void) } #endif -#endif /* __IRQ_H */ \ No newline at end of file +#endif /* __IRQ_H */ diff --git a/hw/bsp/frdm_k32l2b/board.h b/hw/bsp/frdm_k32l2b/board.h index 825367915..8d21fdcd4 100644 --- a/hw/bsp/frdm_k32l2b/board.h +++ b/hw/bsp/frdm_k32l2b/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/frdm_k32l2b/frdm_k32l2b.c b/hw/bsp/frdm_k32l2b/frdm_k32l2b.c index 924bb18e9..8d2b39500 100644 --- a/hw/bsp/frdm_k32l2b/frdm_k32l2b.c +++ b/hw/bsp/frdm_k32l2b/frdm_k32l2b.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) @@ -56,10 +56,10 @@ void board_init(void) gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, kPORT_MuxAsGpio }; PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); @@ -68,7 +68,7 @@ void board_init(void) PORT_SetPinMux(PORTA, 1U, kPORT_MuxAlt2); /* PORTA2 (pin 24) is configured as LPUART0_TX */ PORT_SetPinMux(PORTA, 2U, kPORT_MuxAlt2); - + SIM->SOPT5 = ((SIM->SOPT5 & /* Mask bits to zero which are setting */ (~(SIM_SOPT5_LPUART0TXSRC_MASK | SIM_SOPT5_LPUART0RXSRC_MASK))) diff --git a/hw/bsp/frdm_kl25z/frdm_kl25z.c b/hw/bsp/frdm_kl25z/frdm_kl25z.c index 8d93fdbaa..46f85f6a5 100644 --- a/hw/bsp/frdm_kl25z/frdm_kl25z.c +++ b/hw/bsp/frdm_kl25z/frdm_kl25z.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) @@ -103,7 +103,7 @@ void board_init(void) // Button CLOCK_EnableClock(BUTTON_PIN_CLOCK); port_pin_config_t button_port = { - .pullSelect = kPORT_PullUp, + .pullSelect = kPORT_PullUp, .mux = BUTTON_PIN_FUNCTION, }; PORT_SetPinConfig(BUTTON_PIN_PORT, BUTTON_PIN, &button_port); diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index 60a326d27..113c4c304 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -44,7 +44,7 @@ void USBFS_IRQHandler(void) { tud_int_handler(0); } // According to GD32VF103 user manual clock tree: // Systick clock = AHB clock / 4. -#define TIMER_TICKS ((SystemCoreClock / 4) / 1000) +#define TIMER_TICKS ((SystemCoreClock / 4) / 1000) #define BUTTON_PORT GPIOA #define BUTTON_PIN GPIO_PIN_0 diff --git a/hw/bsp/gd32vf103/system_gd32vf103.c b/hw/bsp/gd32vf103/system_gd32vf103.c index c2001a980..200852abf 100644 --- a/hw/bsp/gd32vf103/system_gd32vf103.c +++ b/hw/bsp/gd32vf103/system_gd32vf103.c @@ -95,7 +95,7 @@ void SystemInit(void) /* reset the RCC clock configuration to the default reset state */ /* enable IRC8M */ RCU_CTL |= RCU_CTL_IRC8MEN; - + /* reset SCS, AHBPSC, APB1PSC, APB2PSC, ADCPSC, CKOUT0SEL bits */ RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC | RCU_CFG0_ADCPSC | RCU_CFG0_ADCPSC_2 | RCU_CFG0_CKOUT0SEL); @@ -107,7 +107,7 @@ void SystemInit(void) RCU_CTL &= ~(RCU_CTL_HXTALBPS); /* reset PLLSEL, PREDV0_LSB, PLLMF, USBFSPSC bits */ - + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0_LSB | RCU_CFG0_PLLMF | RCU_CFG0_USBFSPSC | RCU_CFG0_PLLMF_4); RCU_CFG1 = 0x00000000U; @@ -141,12 +141,12 @@ void SystemCoreClockUpdate(void) case SEL_IRC8M: SystemCoreClock = IRC8M_VALUE; break; - + /* HXTAL is selected as CK_SYS */ case SEL_HXTAL: SystemCoreClock = HXTAL_VALUE; break; - + /* PLL is selected as CK_SYS */ case SEL_PLL: /* PLL clock source selection, HXTAL or IRC8M/2 */ @@ -313,7 +313,7 @@ static void system_clock_72m_hxtal(void) /* APB1 = AHB/2 */ RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; - /* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */ + /* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */ RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL18); diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.h b/hw/bsp/imxrt/boards/metro_m7_1011/board.h index 7fa2f8541..3c172ebb9 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld index 30dd84373..960fc6891 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld +++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld @@ -35,7 +35,7 @@ MEMORY { m_flash_config (RX) : ORIGIN = 0x60000400, LENGTH = 0x00000C00 m_ivt (RX) : ORIGIN = 0x60001000, LENGTH = 0x00001000 - + m_interrupts (RX) : ORIGIN = 0x6000C000, LENGTH = 0x00000400 m_text (RX) : ORIGIN = 0x6000C400, LENGTH = (8*1024*1024 - 0xC400) m_qacode (RX) : ORIGIN = 0x00000000, LENGTH = 0x00008000 diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h index 4f21b52fa..926f45618 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h index 932ce7fd7..10d9fad07 100644 --- a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h index 56ed5855b..284bb08e7 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h index 152c9ab18..9100072e2 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h index 0472f608c..beb69bf2b 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h index 7fa37e33f..0f45f72e1 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h index 5f51e91a2..37ad94eef 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/teensy_40/board.h b/hw/bsp/imxrt/boards/teensy_40/board.h index b3cc0a8c5..cac773442 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.h +++ b/hw/bsp/imxrt/boards/teensy_40/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/teensy_40/board.mk b/hw/bsp/imxrt/boards/teensy_40/board.mk index 0ad5ea5c0..45ca0fb6e 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.mk +++ b/hw/bsp/imxrt/boards/teensy_40/board.mk @@ -5,6 +5,6 @@ MCU_VARIANT = MIMXRT1062 JLINK_DEVICE = MIMXRT1062xxx6A # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli -# Make sure it is in your PATH +# Make sure it is in your PATH flash: $(BUILD)/$(PROJECT).hex teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/hw/bsp/imxrt/boards/teensy_41/board.h b/hw/bsp/imxrt/boards/teensy_41/board.h index b0b4931c7..72c18f540 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.h +++ b/hw/bsp/imxrt/boards/teensy_41/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/teensy_41/board.mk b/hw/bsp/imxrt/boards/teensy_41/board.mk index 0ad5ea5c0..45ca0fb6e 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.mk +++ b/hw/bsp/imxrt/boards/teensy_41/board.mk @@ -5,6 +5,6 @@ MCU_VARIANT = MIMXRT1062 JLINK_DEVICE = MIMXRT1062xxx6A # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli -# Make sure it is in your PATH +# Make sure it is in your PATH flash: $(BUILD)/$(PROJECT).hex teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index e28a6174a..5eb672c24 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld b/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld index 5420ffc00..f478a99c7 100644 --- a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld +++ b/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld @@ -214,4 +214,3 @@ SECTIONS ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") } - diff --git a/hw/bsp/kuiic/board.h b/hw/bsp/kuiic/board.h index 78ad83a2e..1e2d4f18b 100644 --- a/hw/bsp/kuiic/board.h +++ b/hw/bsp/kuiic/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/kuiic/kuiic.c b/hw/bsp/kuiic/kuiic.c index 7aaa9e03c..97677d47a 100644 --- a/hw/bsp/kuiic/kuiic.c +++ b/hw/bsp/kuiic/kuiic.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) @@ -96,10 +96,10 @@ void board_init(void) CLOCK_EnableClock(kCLOCK_PortD); CLOCK_EnableClock(kCLOCK_PortE); - + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 1 }; GPIO_PinInit(GPIOA, 1U, &led_config); - PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); + PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); led_config.outputLogic = 0; GPIO_PinInit(GPIOA, 2U, &led_config); PORT_SetPinMux(PORTA, 2U, kPORT_MuxAsGpio); @@ -108,10 +108,10 @@ void board_init(void) gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, kPORT_MuxAsGpio }; PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); @@ -121,7 +121,7 @@ void board_init(void) PORT_SetPinMux(PORTC, 3U, kPORT_MuxAlt3); /* PORTA2 (pin 24) is configured as LPUART0_TX */ PORT_SetPinMux(PORTE, 0U, kPORT_MuxAlt3); - + SIM->SOPT5 = ((SIM->SOPT5 & /* Mask bits to zero which are setting */ (~(SIM_SOPT5_LPUART1TXSRC_MASK | SIM_SOPT5_LPUART1RXSRC_MASK))) diff --git a/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld b/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld index 6dd12ade1..d8079717e 100644 --- a/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld +++ b/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld @@ -13,29 +13,29 @@ MEMORY { /* Define each memory region */ - MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ - Ram0_16 (rwx) : ORIGIN = 0x2000000, LENGTH = 0x4000 /* 16K bytes (alias RAM) */ - Ram1_16 (rwx) : ORIGIN = 0x2004000, LENGTH = 0x4000 /* 16K bytes (alias RAM2) */ - Ram2_4 (rwx) : ORIGIN = 0x2008000, LENGTH = 0x1000 /* 4K bytes (alias RAM3) */ + MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ + Ram0_16 (rwx) : ORIGIN = 0x2000000, LENGTH = 0x4000 /* 16K bytes (alias RAM) */ + Ram1_16 (rwx) : ORIGIN = 0x2004000, LENGTH = 0x4000 /* 16K bytes (alias RAM2) */ + Ram2_4 (rwx) : ORIGIN = 0x2008000, LENGTH = 0x1000 /* 4K bytes (alias RAM3) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash256 = 0x0 ; /* MFlash256 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ - __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ - __base_Ram0_16 = 0x2000000 ; /* Ram0_16 */ - __base_RAM = 0x2000000 ; /* RAM */ - __top_Ram0_16 = 0x2000000 + 0x4000 ; /* 16K bytes */ - __top_RAM = 0x2000000 + 0x4000 ; /* 16K bytes */ - __base_Ram1_16 = 0x2004000 ; /* Ram1_16 */ - __base_RAM2 = 0x2004000 ; /* RAM2 */ - __top_Ram1_16 = 0x2004000 + 0x4000 ; /* 16K bytes */ - __top_RAM2 = 0x2004000 + 0x4000 ; /* 16K bytes */ - __base_Ram2_4 = 0x2008000 ; /* Ram2_4 */ - __base_RAM3 = 0x2008000 ; /* RAM3 */ - __top_Ram2_4 = 0x2008000 + 0x1000 ; /* 4K bytes */ - __top_RAM3 = 0x2008000 + 0x1000 ; /* 4K bytes */ + __base_MFlash256 = 0x0 ; /* MFlash256 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ + __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ + __base_Ram0_16 = 0x2000000 ; /* Ram0_16 */ + __base_RAM = 0x2000000 ; /* RAM */ + __top_Ram0_16 = 0x2000000 + 0x4000 ; /* 16K bytes */ + __top_RAM = 0x2000000 + 0x4000 ; /* 16K bytes */ + __base_Ram1_16 = 0x2004000 ; /* Ram1_16 */ + __base_RAM2 = 0x2004000 ; /* RAM2 */ + __top_Ram1_16 = 0x2004000 + 0x4000 ; /* 16K bytes */ + __top_RAM2 = 0x2004000 + 0x4000 ; /* 16K bytes */ + __base_Ram2_4 = 0x2008000 ; /* Ram2_4 */ + __base_RAM3 = 0x2008000 ; /* RAM3 */ + __top_Ram2_4 = 0x2008000 + 0x1000 ; /* 4K bytes */ + __top_RAM3 = 0x2008000 + 0x1000 ; /* 4K bytes */ ENTRY(ResetISR) @@ -84,9 +84,9 @@ SECTIONS } > MFlash256 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash256 @@ -98,9 +98,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > MFlash256 __exidx_end = .; - + _etext = .; - + /* DATA section for Ram1_16 */ .data_RAM2 : ALIGN(4) @@ -225,11 +225,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_16 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -243,4 +243,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpc15/family.c b/hw/bsp/lpc15/family.c index 7f5984a3e..30a3e51e1 100644 --- a/hw/bsp/lpc15/family.c +++ b/hw/bsp/lpc15/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld index 51fd1539d..f12c1760c 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld @@ -12,43 +12,43 @@ MEMORY { /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } /* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) @@ -137,9 +137,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) __exidx_end = .; } > MFlashA512 - + _etext = .; - + /* DATA section for RamLoc40 */ .data_RAM2 : ALIGN(4) @@ -377,17 +377,17 @@ SECTIONS . = ALIGN(4) ; _end_noinit = .; PROVIDE(__end_noinit_RAM = .) ; - PROVIDE(__end_noinit_RamLoc32 = .) ; + PROVIDE(__end_noinit_RamLoc32 = .) ; } > RamLoc32 AT> RamLoc32 PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -401,4 +401,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld index 9a308e342..9a67e8946 100644 --- a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -11,44 +11,44 @@ MEMORY { /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } /* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ -__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) @@ -118,9 +118,9 @@ SECTIONS } > MFlashA512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlashA512 @@ -134,7 +134,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamLoc40 */ .data_RAM2 : ALIGN(4) @@ -215,7 +215,7 @@ SECTIONS *(.bss.$RamLoc40*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 + } > RamLoc40 /* BSS section for RamAHB32 */ .bss_RAM3 : ALIGN(4) @@ -225,7 +225,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 + } > RamAHB32 /* BSS section for RamAHB16 */ .bss_RAM4 : ALIGN(4) @@ -235,7 +235,7 @@ SECTIONS *(.bss.$RamAHB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 + } > RamAHB16 /* BSS section for RamAHB_ETB16 */ .bss_RAM5 : ALIGN(4) @@ -245,7 +245,7 @@ SECTIONS *(.bss.$RamAHB_ETB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -264,7 +264,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamLoc40*) . = ALIGN(4) ; - } > RamLoc40 + } > RamLoc40 /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -272,7 +272,7 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* NOINIT section for RamAHB16 */ .noinit_RAM4 (NOLOAD) : ALIGN(4) @@ -280,7 +280,7 @@ SECTIONS *(.noinit.$RAM4*) *(.noinit.$RamAHB16*) . = ALIGN(4) ; - } > RamAHB16 + } > RamAHB16 /* NOINIT section for RamAHB_ETB16 */ .noinit_RAM5 (NOLOAD) : ALIGN(4) @@ -288,13 +288,13 @@ SECTIONS *(.noinit.$RAM5*) *(.noinit.$RamAHB_ETB16*) . = ALIGN(4) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -302,11 +302,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -320,4 +320,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index 72c20e034..57f9d55da 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk b/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk index 925374cc8..5f15e2bbe 100644 --- a/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk +++ b/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk @@ -15,4 +15,4 @@ PYOCD_TARGET = LPC54628 #flash: flash-pyocd -flash: flash-jlink \ No newline at end of file +flash: flash-jlink diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index 621788948..fe9cfcc47 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld b/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld index 6b5d852aa..e2197b972 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld +++ b/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld @@ -231,4 +231,3 @@ SECTIONS ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") } - diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 5b6c56dd3..3ed00e7da 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso11u37/lpc11u37.ld b/hw/bsp/lpcxpresso11u37/lpc11u37.ld index 6a2dfb7f5..8e0a4e4c6 100644 --- a/hw/bsp/lpcxpresso11u37/lpc11u37.ld +++ b/hw/bsp/lpcxpresso11u37/lpc11u37.ld @@ -12,24 +12,24 @@ MEMORY { /* Define each memory region */ - MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash128 = 0x0 ; /* MFlash128 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ - __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_MFlash128 = 0x0 ; /* MFlash128 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ + __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ ENTRY(ResetISR) @@ -74,9 +74,9 @@ SECTIONS } > MFlash128 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash128 @@ -88,9 +88,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > MFlash128 __exidx_end = .; - + _etext = .; - + /* DATA section for RamUsb2 */ .data_RAM2 : ALIGN(4) @@ -176,11 +176,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) ) ); @@ -192,4 +192,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c b/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c index 11f1797a2..79cd685c3 100644 --- a/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c +++ b/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso11u68/lpc11u68.ld b/hw/bsp/lpcxpresso11u68/lpc11u68.ld index 56d9e4b89..4a35b192e 100644 --- a/hw/bsp/lpcxpresso11u68/lpc11u68.ld +++ b/hw/bsp/lpcxpresso11u68/lpc11u68.ld @@ -11,29 +11,29 @@ MEMORY { /* Define each memory region */ - MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ - Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ + MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ + Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash256 = 0x0 ; /* MFlash256 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ - __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ - __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ - __base_RAM2 = 0x20000000 ; /* RAM2 */ - __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ - __base_RAM3 = 0x20004000 ; /* RAM3 */ - __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_MFlash256 = 0x0 ; /* MFlash256 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ + __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ + __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ + __base_RAM2 = 0x20000000 ; /* RAM2 */ + __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ + __base_RAM3 = 0x20004000 ; /* RAM3 */ + __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ ENTRY(ResetISR) @@ -82,9 +82,9 @@ SECTIONS } > MFlash256 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash256 @@ -98,7 +98,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* possible MTB section for Ram1_2 */ .mtb_buffer_RAM2 (NOLOAD) : { @@ -172,7 +172,7 @@ SECTIONS *(.bss.$Ram1_2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > Ram1_2 + } > Ram1_2 /* BSS section for Ram2USB_2 */ .bss_RAM3 : ALIGN(4) @@ -182,7 +182,7 @@ SECTIONS *(.bss.$Ram2USB_2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > Ram2USB_2 + } > Ram2USB_2 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -201,7 +201,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$Ram1_2*) . = ALIGN(4) ; - } > Ram1_2 + } > Ram1_2 /* NOINIT section for Ram2USB_2 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -209,13 +209,13 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$Ram2USB_2*) . = ALIGN(4) ; - } > Ram2USB_2 + } > Ram2USB_2 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > Ram0_32 @@ -223,11 +223,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) ) ); @@ -239,4 +239,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c b/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c index e33a5c6e5..a04e43867 100644 --- a/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c +++ b/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso1347/lpc1347.ld b/hw/bsp/lpcxpresso1347/lpc1347.ld index 42a4bb25c..a2111cd1c 100644 --- a/hw/bsp/lpcxpresso1347/lpc1347.ld +++ b/hw/bsp/lpcxpresso1347/lpc1347.ld @@ -11,29 +11,29 @@ MEMORY { /* Define each memory region */ - MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ + MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash64 = 0x0 ; /* MFlash64 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ - __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ + __base_MFlash64 = 0x0 ; /* MFlash64 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ + __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ ENTRY(ResetISR) @@ -82,9 +82,9 @@ SECTIONS } > MFlash64 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash64 @@ -98,7 +98,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamUsb2 */ .data_RAM2 : ALIGN(4) @@ -153,7 +153,7 @@ SECTIONS *(.bss.$RamUsb2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamUsb2 + } > RamUsb2 /* BSS section for RamPeriph2 */ .bss_RAM3 : ALIGN(4) @@ -163,7 +163,7 @@ SECTIONS *(.bss.$RamPeriph2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > RamPeriph2 + } > RamPeriph2 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -182,7 +182,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamUsb2*) . = ALIGN(4) ; - } > RamUsb2 + } > RamUsb2 /* NOINIT section for RamPeriph2 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -190,13 +190,13 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$RamPeriph2*) . = ALIGN(4) ; - } > RamPeriph2 + } > RamPeriph2 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc8 @@ -204,11 +204,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -222,4 +222,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso1347/lpcxpresso1347.c b/hw/bsp/lpcxpresso1347/lpcxpresso1347.c index a9a67ae3a..8ee611037 100644 --- a/hw/bsp/lpcxpresso1347/lpcxpresso1347.c +++ b/hw/bsp/lpcxpresso1347/lpcxpresso1347.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -64,7 +64,7 @@ const uint32_t ExtRateIn = 0; /* Pin muxing table, only items that need changing from their default pin state are in this table. */ -static const PINMUX_GRP_T pinmuxing[] = +static const PINMUX_GRP_T pinmuxing[] = { {0, 1, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_1 used for CLKOUT */ {0, 2, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_PULLUP)}, /* PIO0_2 used for SSEL */ diff --git a/hw/bsp/lpcxpresso1769/lpc1769.ld b/hw/bsp/lpcxpresso1769/lpc1769.ld index d1c83d8e2..095bd3d92 100644 --- a/hw/bsp/lpcxpresso1769/lpc1769.ld +++ b/hw/bsp/lpcxpresso1769/lpc1769.ld @@ -11,24 +11,24 @@ MEMORY { /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ ENTRY(ResetISR) @@ -72,9 +72,9 @@ SECTIONS } > MFlash512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash512 @@ -88,7 +88,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamAHB32 */ .data_RAM2 : ALIGN(4) @@ -130,7 +130,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 + } > RamAHB32 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -149,13 +149,13 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -163,11 +163,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -181,4 +181,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c index b7bce93d2..24333ad1a 100644 --- a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c +++ b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c b/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c index 6bade7743..c94b0d6d8 100644 --- a/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c +++ b/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/mbed1768/lpc1768.ld b/hw/bsp/mbed1768/lpc1768.ld index d1c83d8e2..095bd3d92 100644 --- a/hw/bsp/mbed1768/lpc1768.ld +++ b/hw/bsp/mbed1768/lpc1768.ld @@ -11,24 +11,24 @@ MEMORY { /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ ENTRY(ResetISR) @@ -72,9 +72,9 @@ SECTIONS } > MFlash512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash512 @@ -88,7 +88,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamAHB32 */ .data_RAM2 : ALIGN(4) @@ -130,7 +130,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 + } > RamAHB32 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -149,13 +149,13 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -163,11 +163,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -181,4 +181,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/mbed1768/mbed1768.c b/hw/bsp/mbed1768/mbed1768.c index 08cf3adbd..9f3d294d3 100644 --- a/hw/bsp/mbed1768/mbed1768.c +++ b/hw/bsp/mbed1768/mbed1768.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld b/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld index 0b45ee7bd..796ed04f6 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 MM32 SE TEAM @@ -110,7 +110,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -121,7 +121,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -149,7 +149,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c b/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c index 9793ba241..c3f5bc16d 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 MM32 SE TEAM @@ -57,7 +57,7 @@ const int baudrate = 115200; void board_init (void) { -// usb clock +// usb clock USB_DeviceClockInit(); if ( SysTick_Config(SystemCoreClock / 1000) ) diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c index 4fc314165..d61f775c7 100644 --- a/hw/bsp/ngx4330/ngx4330.c +++ b/hw/bsp/ngx4330/ngx4330.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/ngx4330/ngx4330.ld b/hw/bsp/ngx4330/ngx4330.ld index 7bd363f08..300869c20 100644 --- a/hw/bsp/ngx4330/ngx4330.ld +++ b/hw/bsp/ngx4330/ngx4330.ld @@ -12,39 +12,39 @@ MEMORY { /* Define each memory region */ - RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ - RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ - SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ + RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ + RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ } /* Define a symbol for the top of each memory region */ - __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ - __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ - __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __base_SPIFI = 0x14000000 ; /* SPIFI */ - __base_Flash = 0x14000000 ; /* Flash */ - __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ - __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ + __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ + __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ + __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ + __base_RAM2 = 0x10080000 ; /* RAM2 */ + __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ + __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ + __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ + __base_RAM4 = 0x20008000 ; /* RAM4 */ + __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ + __base_RAM5 = 0x2000c000 ; /* RAM5 */ + __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __base_SPIFI = 0x14000000 ; /* SPIFI */ + __base_Flash = 0x14000000 ; /* Flash */ + __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ + __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ ENTRY(ResetISR) @@ -103,9 +103,9 @@ SECTIONS } > SPIFI /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > SPIFI @@ -117,9 +117,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > SPIFI __exidx_end = .; - + _etext = .; - + /* DATA section for RamLoc72 */ .data_RAM2 : ALIGN(4) @@ -322,11 +322,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc128 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -340,4 +340,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/nrf/boards/adafruit_clue/board.h b/hw/bsp/nrf/boards/adafruit_clue/board.h index 2c58e8fe8..8d6df786e 100644 --- a/hw/bsp/nrf/boards/adafruit_clue/board.h +++ b/hw/bsp/nrf/boards/adafruit_clue/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100755 --- a/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld b/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld index f570740b6..f609f743f 100755 --- a/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld +++ b/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld @@ -20,7 +20,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h index d548e01c3..00fa8d8ea 100644 --- a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h +++ b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h index a86c9dc7f..3dd354efa 100644 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100755 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h index 3208a948a..8e6ce3230 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h index ece6e34cb..605deea24 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h index 132173a80..33c370f53 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h index 01dd1f24f..072cb2714 100644 --- a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h +++ b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk index 3afa234aa..f25ec8f34 100644 --- a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk +++ b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk @@ -12,4 +12,4 @@ $(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex flash: $(BUILD)/$(PROJECT).zip @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 \ No newline at end of file + $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/hw/bsp/nrf/boards/pca10056/board.h b/hw/bsp/nrf/boards/pca10056/board.h index ab12d21aa..50d3067b3 100644 --- a/hw/bsp/nrf/boards/pca10056/board.h +++ b/hw/bsp/nrf/boards/pca10056/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/pca10059/board.h b/hw/bsp/nrf/boards/pca10059/board.h index 0810be648..ea3f4030d 100644 --- a/hw/bsp/nrf/boards/pca10059/board.h +++ b/hw/bsp/nrf/boards/pca10059/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/pca10100/board.h b/hw/bsp/nrf/boards/pca10100/board.h index 881133035..2b2579732 100644 --- a/hw/bsp/nrf/boards/pca10100/board.h +++ b/hw/bsp/nrf/boards/pca10100/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h index dcf829d9c..bc203f073 100644 --- a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h +++ b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index a07332d4c..02cec31ef 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_nuc121s/nuc121_flash.ld b/hw/bsp/nutiny_nuc121s/nuc121_flash.ld index 3966b276e..0c599a561 100644 --- a/hw/bsp/nutiny_nuc121s/nuc121_flash.ld +++ b/hw/bsp/nutiny_nuc121s/nuc121_flash.ld @@ -69,7 +69,7 @@ SECTIONS *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) - + *(.rodata*) KEEP(*(.eh_frame*)) diff --git a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c b/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c index 7117a3422..ec66f8deb 100644 --- a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c +++ b/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_nuc125s/nuc125_flash.ld b/hw/bsp/nutiny_nuc125s/nuc125_flash.ld index 3966b276e..0c599a561 100644 --- a/hw/bsp/nutiny_nuc125s/nuc125_flash.ld +++ b/hw/bsp/nutiny_nuc125s/nuc125_flash.ld @@ -69,7 +69,7 @@ SECTIONS *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) - + *(.rodata*) KEEP(*(.eh_frame*)) diff --git a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c b/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c index 7117a3422..ec66f8deb 100644 --- a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c +++ b/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c b/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c index da62e7bd2..90fa2ffd8 100644 --- a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c +++ b/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c b/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c index 0d78116b8..9e7eacb23 100644 --- a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c +++ b/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c b/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c index 49e66d2d0..1fc97e3dc 100644 --- a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c +++ b/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c b/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c index e47ec5f31..0bb6cb728 100644 --- a/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c +++ b/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 Jerzy Kasenberg diff --git a/hw/bsp/pic32mz/family.c b/hw/bsp/pic32mz/family.c index 786f04978..895e23899 100644 --- a/hw/bsp/pic32mz/family.c +++ b/hw/bsp/pic32mz/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 Jerzy Kasenberg diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h index e7eab088e..1eeeaf9af 100644 --- a/hw/bsp/rp2040/board.h +++ b/hw/bsp/rp2040/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake b/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake index 8280c835d..f9887c09c 100644 --- a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake +++ b/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake @@ -1 +1 @@ -set(PICO_BOARD pico) \ No newline at end of file +set(PICO_BOARD pico) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 678bce274..5d80ab66e 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -55,7 +55,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) message("Compiling TinyUSB with CFG_TUSB_DEBUG=1") set(TINYUSB_DEBUG_LEVEL 1) endif() - + target_compile_definitions(tinyusb_common_base INTERFACE CFG_TUSB_MCU=OPT_MCU_RP2040 CFG_TUSB_OS=${TINYUSB_OPT_OS} diff --git a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c index 9bd9399f6..4f87153ac 100644 --- a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c +++ b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c @@ -33,9 +33,9 @@ * - Short EMLE pad and 3.3V(GR-CITRUS pin name) with a wire. * * The pads are [the back side of GR-CITRUS](https://www.slideshare.net/MinaoYamamoto/grcitrusrx631/2). - * + * * Connect the pins between GR-CITRUS and JLink as follows. - * + * * | Function | GR-CITRUS pin | JLink pin No.| note | * |:---------:|:-------------:|:------------:|:--------:| * | VTref | 3.3V | 1 | | @@ -91,7 +91,7 @@ void INT_Excep_SCI0_TXI0(void) { uint8_t *buf = sci0_buf[0].buf; uint32_t cnt = sci0_buf[0].cnt; - + if (!buf || !cnt) { SCI0.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); return; diff --git a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c index 3c729ad50..691038fc8 100644 --- a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c +++ b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c @@ -126,7 +126,7 @@ void INT_Excep_SCI5_TXI5(void) { uint8_t *buf = sci_buf[0].buf; uint32_t cnt = sci_buf[0].cnt; - + if (!buf || !cnt) { SCI5.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); return; diff --git a/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld b/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld index 8b3124c0e..9e12acec8 100644 --- a/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld +++ b/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/samd21/boards/atsamd21_xpro/board.h b/hw/bsp/samd21/boards/atsamd21_xpro/board.h index a3e03997c..315e40c78 100644 --- a/hw/bsp/samd21/boards/atsamd21_xpro/board.h +++ b/hw/bsp/samd21/boards/atsamd21_xpro/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/circuitplayground_express/board.h b/hw/bsp/samd21/boards/circuitplayground_express/board.h index 2d7da1c0b..0037db00d 100644 --- a/hw/bsp/samd21/boards/circuitplayground_express/board.h +++ b/hw/bsp/samd21/boards/circuitplayground_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/curiosity_nano/board.h b/hw/bsp/samd21/boards/curiosity_nano/board.h index 67924d809..1a4a833a3 100644 --- a/hw/bsp/samd21/boards/curiosity_nano/board.h +++ b/hw/bsp/samd21/boards/curiosity_nano/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.h b/hw/bsp/samd21/boards/feather_m0_express/board.h index b9292b9af..8e0caa6bd 100644 --- a/hw/bsp/samd21/boards/feather_m0_express/board.h +++ b/hw/bsp/samd21/boards/feather_m0_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/itsybitsy_m0/board.h b/hw/bsp/samd21/boards/itsybitsy_m0/board.h index 177fb695e..6ee814da5 100644 --- a/hw/bsp/samd21/boards/itsybitsy_m0/board.h +++ b/hw/bsp/samd21/boards/itsybitsy_m0/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/luna_d21/board.h b/hw/bsp/samd21/boards/luna_d21/board.h index 2e0a2a60f..776063636 100644 --- a/hw/bsp/samd21/boards/luna_d21/board.h +++ b/hw/bsp/samd21/boards/luna_d21/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/luna_d21/board.mk b/hw/bsp/samd21/boards/luna_d21/board.mk index 27a634e3a..508a72b1f 100644 --- a/hw/bsp/samd21/boards/luna_d21/board.mk +++ b/hw/bsp/samd21/boards/luna_d21/board.mk @@ -8,4 +8,3 @@ JLINK_DEVICE = ATSAMD21G18 # flash using dfu-util flash: $(BUILD)/$(PROJECT).bin dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< - diff --git a/hw/bsp/samd21/boards/metro_m0_express/board.h b/hw/bsp/samd21/boards/metro_m0_express/board.h index 13b7556b0..d26aae53c 100644 --- a/hw/bsp/samd21/boards/metro_m0_express/board.h +++ b/hw/bsp/samd21/boards/metro_m0_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/qtpy/board.h b/hw/bsp/samd21/boards/qtpy/board.h index 6f8325e49..9ba39e966 100644 --- a/hw/bsp/samd21/boards/qtpy/board.h +++ b/hw/bsp/samd21/boards/qtpy/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.h b/hw/bsp/samd21/boards/seeeduino_xiao/board.h index 0d1e9cef1..1bd63d6d9 100644 --- a/hw/bsp/samd21/boards/seeeduino_xiao/board.h +++ b/hw/bsp/samd21/boards/seeeduino_xiao/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/trinket_m0/board.h b/hw/bsp/samd21/boards/trinket_m0/board.h index c8692e6bd..741f2a7f3 100644 --- a/hw/bsp/samd21/boards/trinket_m0/board.h +++ b/hw/bsp/samd21/boards/trinket_m0/board.h @@ -31,4 +31,3 @@ // UART #define UART_SERCOM 0 - diff --git a/hw/bsp/samd21/boards/trinket_m0/board.mk b/hw/bsp/samd21/boards/trinket_m0/board.mk index 803ffe892..6addf13b7 100644 --- a/hw/bsp/samd21/boards/trinket_m0/board.mk +++ b/hw/bsp/samd21/boards/trinket_m0/board.mk @@ -2,4 +2,3 @@ CFLAGS += -D__SAMD21E18A__ -DCFG_EXAMPLE_VIDEO_READONLY # All source paths should be relative to the top level. LD_FILE = $(BOARD_PATH)/trinket_m0.ld - diff --git a/hw/bsp/samd21/family.c b/hw/bsp/samd21/family.c index 494dc393a..308fb51b5 100644 --- a/hw/bsp/samd21/family.c +++ b/hw/bsp/samd21/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/feather_m4_express/board.h b/hw/bsp/samd51/boards/feather_m4_express/board.h index 1d5ed8040..4629643fd 100644 --- a/hw/bsp/samd51/boards/feather_m4_express/board.h +++ b/hw/bsp/samd51/boards/feather_m4_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/itsybitsy_m4/board.h b/hw/bsp/samd51/boards/itsybitsy_m4/board.h index 0760d4288..272315771 100644 --- a/hw/bsp/samd51/boards/itsybitsy_m4/board.h +++ b/hw/bsp/samd51/boards/itsybitsy_m4/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.h b/hw/bsp/samd51/boards/metro_m4_express/board.h index ab10ae4f8..5d7734576 100644 --- a/hw/bsp/samd51/boards/metro_m4_express/board.h +++ b/hw/bsp/samd51/boards/metro_m4_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.mk b/hw/bsp/samd51/boards/metro_m4_express/board.mk index d7953cc24..57a680e91 100644 --- a/hw/bsp/samd51/boards/metro_m4_express/board.mk +++ b/hw/bsp/samd51/boards/metro_m4_express/board.mk @@ -7,4 +7,3 @@ LD_FILE = $(BOARD_PATH)/$(BOARD).ld JLINK_DEVICE = ATSAMD51J19 flash: flash-bossac - diff --git a/hw/bsp/samd51/boards/pybadge/board.h b/hw/bsp/samd51/boards/pybadge/board.h index 1d5ed8040..4629643fd 100644 --- a/hw/bsp/samd51/boards/pybadge/board.h +++ b/hw/bsp/samd51/boards/pybadge/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/pyportal/board.h b/hw/bsp/samd51/boards/pyportal/board.h index 9e51ded32..ff04c900b 100644 --- a/hw/bsp/samd51/boards/pyportal/board.h +++ b/hw/bsp/samd51/boards/pyportal/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 020e638c4..3da89ee14 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/same54xplainedpro/same54p20a_flash.ld b/hw/bsp/same54xplainedpro/same54p20a_flash.ld index 97072bfe6..1f427a066 100644 --- a/hw/bsp/same54xplainedpro/same54p20a_flash.ld +++ b/hw/bsp/same54xplainedpro/same54p20a_flash.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/same54xplainedpro/same54p20a_sram.ld b/hw/bsp/same54xplainedpro/same54p20a_sram.ld index 6219f4afe..e6e33ec48 100644 --- a/hw/bsp/same54xplainedpro/same54p20a_sram.ld +++ b/hw/bsp/same54xplainedpro/same54p20a_sram.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/samg55xplained/samg55xplained.c b/hw/bsp/samg55xplained/samg55xplained.c index 027c88e2f..6e1ed56a9 100644 --- a/hw/bsp/samg55xplained/samg55xplained.c +++ b/hw/bsp/samg55xplained/samg55xplained.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, hathach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h index a3e03997c..315e40c78 100644 --- a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h +++ b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.h b/hw/bsp/saml2x/boards/saml22_feather/board.h index 13a326000..72e9897b6 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/board.h +++ b/hw/bsp/saml2x/boards/saml22_feather/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld b/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld index d1aaa44fc..156c3e7e4 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld +++ b/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h index 7fc690ab2..735f6afc8 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld b/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld index d1aaa44fc..156c3e7e4 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/saml2x/family.c b/hw/bsp/saml2x/family.c index 470fde750..f119d23a1 100644 --- a/hw/bsp/saml2x/family.c +++ b/hw/bsp/saml2x/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/sltb009a/sltb009a.c b/hw/bsp/sltb009a/sltb009a.c index b5eb5ed5d..2a5d112a8 100644 --- a/hw/bsp/sltb009a/sltb009a.c +++ b/hw/bsp/sltb009a/sltb009a.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Rafael Silva (@perigoso) @@ -712,7 +712,7 @@ uint32_t board_millis(void) * @retval None */ void assert_failed(char *file, uint32_t line) -{ +{ /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ diff --git a/hw/bsp/spresense/board_spresense.c b/hw/bsp/spresense/board_spresense.c index 256bccd15..5f778ad70 100644 --- a/hw/bsp/spresense/board_spresense.c +++ b/hw/bsp/spresense/board_spresense.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright 2019 Sony Semiconductor Solutions Corporation @@ -64,7 +64,7 @@ void board_led_write(bool state) // a '1' means active (pressed), a '0' means inactive. uint32_t board_button_read(void) { - if (board_gpio_read(BUTTON_PIN)) + if (board_gpio_read(BUTTON_PIN)) { return 0; } @@ -96,7 +96,7 @@ uint32_t board_millis(void) /* Wait until RTC is available */ while (g_rtc_enabled == false); - if (clock_gettime(CLOCK_MONOTONIC, &tp)) + if (clock_gettime(CLOCK_MONOTONIC, &tp)) { return 0; } diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h index 7c527e2c2..9af81e63c 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk index cf787a103..1cc443352 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk @@ -12,4 +12,4 @@ IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f070xb_flash.icf JLINK_DEVICE = stm32f070rb # flash target using on-board stlink -flash: flash-stlink \ No newline at end of file +flash: flash-stlink diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld index 4a6491510..6bb9d33cb 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld @@ -102,12 +102,12 @@ SECTIONS . = ALIGN(4); } >FLASH - .ARM.extab : { + .ARM.extab : { . = ALIGN(4); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(4); } >FLASH - + .ARM : { . = ALIGN(4); __exidx_start = .; @@ -124,7 +124,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); } >FLASH - + .init_array : { . = ALIGN(4); @@ -134,7 +134,7 @@ SECTIONS PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); } >FLASH - + .fini_array : { . = ALIGN(4); @@ -149,7 +149,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections into "RAM" Ram type memory */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -158,9 +158,9 @@ SECTIONS . = ALIGN(4); _edata = .; /* define a global symbol at data end */ - + } >RAM AT> FLASH - + /* Uninitialized data section into "RAM" Ram type memory */ . = ALIGN(4); .bss : diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld b/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld index f0879e929..8715e0723 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld +++ b/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/board.h b/hw/bsp/stm32f0/boards/stm32f072disco/board.h index 0b1824b8e..1febd01e8 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/boards/stm32f072eval/board.h b/hw/bsp/stm32f0/boards/stm32f072eval/board.h index 8869d5dc9..7dcfa3e85 100644 --- a/hw/bsp/stm32f0/boards/stm32f072eval/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072eval/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c index 884208fb1..bfa843494 100644 --- a/hw/bsp/stm32f0/family.c +++ b/hw/bsp/stm32f0/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/stm32f0xx_hal_conf.h b/hw/bsp/stm32f0/stm32f0xx_hal_conf.h index 0bf053e13..b205464f3 100644 --- a/hw/bsp/stm32f0/stm32f0xx_hal_conf.h +++ b/hw/bsp/stm32f0/stm32f0xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /*#define HAL_ADC_MODULE_ENABLED */ /*#define HAL_CAN_MODULE_ENABLED */ /*#define HAL_CEC_MODULE_ENABLED */ @@ -65,15 +65,15 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ /** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value */ #if !defined (HSE_STARTUP_TIMEOUT) #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ @@ -82,24 +82,24 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value */ -#if !defined (HSI_STARTUP_TIMEOUT) +#if !defined (HSI_STARTUP_TIMEOUT) #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ +#endif /* HSI_STARTUP_TIMEOUT */ /** * @brief Internal High Speed oscillator for ADC (HSI14) value. */ -#if !defined (HSI14_VALUE) +#if !defined (HSI14_VALUE) #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -108,7 +108,7 @@ /** * @brief Internal High Speed oscillator for USB (HSI48) value. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -117,8 +117,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -127,7 +127,7 @@ */ #if !defined (LSE_VALUE) #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ +#endif /* LSE_VALUE */ /** * @brief Time out for LSE start up value in ms. @@ -143,8 +143,8 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ /* Warning: Must be set to higher priority for HAL_Delay() */ /* and HAL_GetTick() usage under interrupt context */ @@ -175,14 +175,14 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ - #define USE_FULL_ASSERT 1 + #define USE_FULL_ASSERT 1 /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -299,7 +299,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -308,8 +308,8 @@ void assert_failed(const char* file, uint32_t line); #else #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - +#endif /* USE_FULL_ASSERT */ + #ifdef __cplusplus } #endif @@ -318,4 +318,3 @@ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld index c434ca038..95836522e 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h index 57a607ed5..8fa8f4ffa 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld index da637d1b0..524ac7c03 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h index bedce7f14..c8dba4268 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c index 6f0471096..5e112de70 100644 --- a/hw/bsp/stm32f1/family.c +++ b/hw/bsp/stm32f1/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -53,7 +53,7 @@ void USBWakeUp_IRQHandler(void) void board_init(void) { board_stm32f1_clock_init(); - + // Enable All GPIOs clocks __HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE(); @@ -70,7 +70,7 @@ void board_init(void) NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); NVIC_SetPriority(USBWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif - + // LED GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitStruct.Pin = LED_PIN; @@ -153,7 +153,7 @@ void HardFault_Handler (void) * @retval None */ void assert_failed(const char *file, uint32_t line) -{ +{ /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ diff --git a/hw/bsp/stm32f1/stm32f1xx_hal_conf.h b/hw/bsp/stm32f1/stm32f1xx_hal_conf.h index 5243e5bca..45ef993da 100644 --- a/hw/bsp/stm32f1/stm32f1xx_hal_conf.h +++ b/hw/bsp/stm32f1/stm32f1xx_hal_conf.h @@ -32,7 +32,7 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ #define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ @@ -69,9 +69,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #if defined(USE_STM3210C_EVAL) #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ #else @@ -86,7 +86,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */ @@ -95,7 +95,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -119,7 +119,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -151,7 +151,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -168,7 +168,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -176,9 +176,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -190,7 +190,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -205,13 +205,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -233,7 +233,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -243,7 +243,7 @@ #ifdef HAL_GPIO_MODULE_ENABLED #include "stm32f1xx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ - + #ifdef HAL_EXTI_MODULE_ENABLED #include "stm32f1xx_hal_exti.h" #endif /* HAL_EXTI_MODULE_ENABLED */ @@ -251,7 +251,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f1xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CAN_MODULE_ENABLED #include "stm32f1xx_hal_can.h" #endif /* HAL_CAN_MODULE_ENABLED */ @@ -310,15 +310,15 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f1xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ +#endif /* HAL_PCCARD_MODULE_ENABLED */ #ifdef HAL_SD_MODULE_ENABLED #include "stm32f1xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ +#endif /* HAL_SD_MODULE_ENABLED */ #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f1xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_SPI_MODULE_ENABLED #include "stm32f1xx_hal_spi.h" @@ -358,7 +358,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -367,8 +367,8 @@ void assert_failed(const char* file, uint32_t line); #else #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - +#endif /* USE_FULL_ASSERT */ + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld b/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld index 5010435ae..3fce1b578 100644 --- a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld +++ b/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f207nucleo/stm32f207nucleo.c index d77643661..80f762c93 100644 --- a/hw/bsp/stm32f207nucleo/stm32f207nucleo.c +++ b/hw/bsp/stm32f207nucleo/stm32f207nucleo.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -105,7 +105,7 @@ void SystemClock_Config(void) void board_init(void) { SystemClock_Config(); - + #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); diff --git a/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h b/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h index 2ab46b260..b38a9d951 100644 --- a/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h +++ b/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F2xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CRC_MODULE_ENABLED */ @@ -42,7 +42,7 @@ /* #define HAL_DMA_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ #define HAL_EXTI_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ @@ -52,8 +52,8 @@ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SD_MODULE_ENABLED */ @@ -65,7 +65,7 @@ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ #define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED /* #define HAL_HCD_MODULE_ENABLED */ @@ -73,9 +73,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -86,7 +86,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ @@ -95,7 +95,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -113,8 +113,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/ @@ -126,7 +126,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -163,7 +163,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -180,7 +180,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -190,7 +190,7 @@ /* LAN8742A PHY Address*/ #define LAN8742A_PHY_ADDRESS 0x00U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -202,7 +202,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -217,7 +217,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ @@ -228,7 +228,7 @@ #define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ #define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - + /* ################## SPI peripheral configuration ########################## */ /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver @@ -240,7 +240,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -258,7 +258,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f2xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f2xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -276,7 +276,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f2xx_hal_cryp.h" + #include "stm32f2xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DAC_MODULE_ENABLED @@ -294,7 +294,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f2xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f2xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -309,7 +309,7 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f2xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ +#endif /* HAL_PCCARD_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f2xx_hal_hash.h" @@ -378,14 +378,14 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f2xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -402,6 +402,6 @@ #endif #endif /* __STM32F2xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld b/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld index 7f46c71b2..981107af1 100644 --- a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld +++ b/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f303disco/stm32f303disco.c b/hw/bsp/stm32f303disco/stm32f303disco.c index 940c49d26..ac9bda983 100644 --- a/hw/bsp/stm32f303disco/stm32f303disco.c +++ b/hw/bsp/stm32f303disco/stm32f303disco.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h b/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h index 0abcbb019..82d3765af 100644 --- a/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h +++ b/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F3xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ @@ -57,7 +57,7 @@ /* #define HAL_OPAMP_MODULE_ENABLED */ /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_PWR_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SDADC_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ @@ -73,15 +73,15 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ /** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value */ #if !defined (HSE_STARTUP_TIMEOUT) #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ @@ -90,25 +90,25 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value */ -#if !defined (HSI_STARTUP_TIMEOUT) +#if !defined (HSI_STARTUP_TIMEOUT) #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ +#endif /* HSI_STARTUP_TIMEOUT */ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (40000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (40000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -124,11 +124,11 @@ */ #if !defined (LSE_STARTUP_TIMEOUT) #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ +#endif /* LSE_STARTUP_TIMEOUT */ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source + * This value is used by the I2S HAL module to compute the I2S clock source * frequency, this source is inserted directly through I2S_CKIN pad. * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) * - External clock not generated on EVAL 373 @@ -256,8 +256,8 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f3xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_HRTIM_MODULE_ENABLED #include "stm32f3xx_hal_hrtim.h" #endif /* HAL_HRTIM_MODULE_ENABLED */ diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld b/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld index 9eb53bcc0..0dc2879a4 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h index 19d0a1ea4..d1ad2a6ce 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld b/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld index 9eb53bcc0..0dc2879a4 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.h b/hw/bsp/stm32f4/boards/pyboardv11/board.h index 685919c57..c126f0666 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.h +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld index 2bc5f6c14..b91f456ca 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h index e1fef7277..e6c99a462 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h index 2ab9a1d57..16f081cfb 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld index aac6577ea..549787945 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/hw/bsp/stm32f4/boards/stm32f407disco/board.h index 693e0393f..c38f354ce 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld index 56dcea605..45912ac32 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(4); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h index e1fef7277..e6c99a462 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h index 2ab9a1d57..16f081cfb 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld index 4477229ea..85bf5c4c4 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/hw/bsp/stm32f4/boards/stm32f411disco/board.h index 008a94a5d..57d1e061e 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld index 2372cc1d9..38dd3d321 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/hw/bsp/stm32f4/boards/stm32f412disco/board.h index 7f4a4fa15..d61b70eb9 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld index 2372cc1d9..38dd3d321 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h index a2c11d717..7bbd6b54f 100644 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -263,7 +263,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -281,7 +281,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -303,7 +303,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -325,7 +325,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -340,11 +340,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -425,7 +425,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -464,7 +464,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 93ab5bb35..a308bae05 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h index d0ef6625f..ed02df061 100644 --- a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h +++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/hw/bsp/stm32f7/boards/stm32f723disco/board.h index 93d83efc6..258786b7f 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/hw/bsp/stm32f7/boards/stm32f746disco/board.h index ee342b9f5..1c7e6dd2b 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld index e1e60bc78..eeb0e29f3 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h index 92c109a72..cf895af87 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h index 234191b00..03dec8f0d 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h @@ -2,7 +2,7 @@ ****************************************************************************** * @file stm32f7xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration file. + * @brief HAL configuration file. ****************************************************************************** * @attention * @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F7xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ @@ -44,7 +44,7 @@ #define HAL_DMA_MODULE_ENABLED /* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ @@ -58,7 +58,7 @@ /* #define HAL_LTDC_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -84,9 +84,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -97,7 +97,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -106,7 +106,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -124,8 +124,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ @@ -137,7 +137,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -185,7 +185,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1 */ @@ -202,7 +202,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -211,7 +211,7 @@ /* Section 2: PHY configuration section */ /* LAN8742A PHY Address*/ #define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY ((uint32_t)0x00000FFF) /* PHY Configuration delay */ #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) @@ -223,7 +223,7 @@ #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -238,7 +238,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ @@ -261,7 +261,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -275,7 +275,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f7xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f7xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -301,7 +301,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" + #include "stm32f7xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -323,7 +323,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f7xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f7xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -338,7 +338,7 @@ #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f7xx_hal_hash.h" @@ -443,14 +443,14 @@ #ifdef HAL_MDIOS_MODULE_ENABLED #include "stm32f7xx_hal_mdios.h" #endif /* HAL_MDIOS_MODULE_ENABLED */ - + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -467,6 +467,6 @@ #endif #endif /* __STM32F7xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld index 3785f9cbf..520a75539 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h index 1283f2313..e053572a7 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk index a460245b2..be5862612 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk @@ -1,5 +1,5 @@ PORT ?= 0 -SPEED ?= full +SPEED ?= full CFLAGS += \ -DSTM32F767xx \ diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h index 234191b00..03dec8f0d 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h @@ -2,7 +2,7 @@ ****************************************************************************** * @file stm32f7xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration file. + * @brief HAL configuration file. ****************************************************************************** * @attention * @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F7xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ @@ -44,7 +44,7 @@ #define HAL_DMA_MODULE_ENABLED /* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ @@ -58,7 +58,7 @@ /* #define HAL_LTDC_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -84,9 +84,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -97,7 +97,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -106,7 +106,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -124,8 +124,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ @@ -137,7 +137,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -185,7 +185,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1 */ @@ -202,7 +202,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -211,7 +211,7 @@ /* Section 2: PHY configuration section */ /* LAN8742A PHY Address*/ #define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY ((uint32_t)0x00000FFF) /* PHY Configuration delay */ #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) @@ -223,7 +223,7 @@ #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -238,7 +238,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ @@ -261,7 +261,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -275,7 +275,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f7xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f7xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -301,7 +301,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" + #include "stm32f7xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -323,7 +323,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f7xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f7xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -338,7 +338,7 @@ #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f7xx_hal_hash.h" @@ -443,14 +443,14 @@ #ifdef HAL_MDIOS_MODULE_ENABLED #include "stm32f7xx_hal_mdios.h" #endif /* HAL_MDIOS_MODULE_ENABLED */ - + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -467,6 +467,6 @@ #endif #endif /* __STM32F7xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.h b/hw/bsp/stm32f7/boards/stm32f769disco/board.h index 5ec217f5f..472af0b98 100644 --- a/hw/bsp/stm32f7/boards/stm32f769disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld b/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld index 9c327483b..c43829994 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld @@ -135,7 +135,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -146,7 +146,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -174,7 +174,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -186,5 +186,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c index f3ba54576..f5177fd10 100644 --- a/hw/bsp/stm32g4/family.c +++ b/hw/bsp/stm32g4/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32g4/stm32g4xx_hal_conf.h b/hw/bsp/stm32g4/stm32g4xx_hal_conf.h index ad5f7dbd4..632c4f0ac 100644 --- a/hw/bsp/stm32g4/stm32g4xx_hal_conf.h +++ b/hw/bsp/stm32g4/stm32g4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32G4xx_HAL_CONF_H @@ -30,10 +30,10 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ - -#define HAL_MODULE_ENABLED + +#define HAL_MODULE_ENABLED /*#define HAL_ADC_MODULE_ENABLED */ /*#define HAL_COMP_MODULE_ENABLED */ @@ -111,9 +111,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (24000000UL) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -124,7 +124,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ @@ -145,10 +145,10 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ -#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /** * @brief External Low Speed oscillator (LSE) value. @@ -156,7 +156,7 @@ The real value may vary depending on the variations in voltage and temperature.* */ #if !defined (LSE_VALUE) #define LSE_VALUE (32768UL) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ +#endif /* LSE_VALUE */ #if !defined (LSE_STARTUP_TIMEOUT) #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ @@ -177,10 +177,10 @@ The real value may vary depending on the variations in voltage and temperature.* /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority (lowest by default) */ +#define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority (lowest by default) */ #define USE_RTOS 0U #define PREFETCH_ENABLE 0U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ The real value may vary depending on the variations in voltage and temperature.* /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.mk b/hw/bsp/stm32h7/boards/daisyseed/board.mk index 4d718f04e..d53782496 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.mk +++ b/hw/bsp/stm32h7/boards/daisyseed/board.mk @@ -16,4 +16,3 @@ JLINK_DEVICE = stm32h750ibk6_m7 # flash target using on-board stlink flash: flash-stlink - diff --git a/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld b/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld index 83904067a..3588ada5b 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld +++ b/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld @@ -172,5 +172,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld index 7ee40671c..336afc01f 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld +++ b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld @@ -118,7 +118,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -129,7 +129,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >DTCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -157,7 +157,7 @@ SECTIONS . = ALIGN(8); } >DTCMRAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -169,5 +169,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld index 7ee40671c..336afc01f 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld @@ -118,7 +118,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -129,7 +129,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >DTCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -157,7 +157,7 @@ SECTIONS . = ALIGN(8); } >DTCMRAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -169,5 +169,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk index b51b109f6..86347ade7 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk @@ -19,4 +19,3 @@ JLINK_DEVICE = stm32h745xi_m7 # flash target using on-board stlink flash: flash-stlink - diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld b/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld index e99bb977b..697a1a1df 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld @@ -171,5 +171,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk index fbf4b55c6..e8202d9fc 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk @@ -21,4 +21,4 @@ IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf JLINK_DEVICE = stm32h743ii # flash target using jlink -flash: flash-jlink \ No newline at end of file +flash: flash-jlink diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 65ffc8ef4..35b2cd55b 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -91,7 +91,7 @@ void board_init(void) #endif NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif - + GPIO_InitTypeDef GPIO_InitStruct; // LED diff --git a/hw/bsp/stm32h7/stm32h7xx_hal_conf.h b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h index a7cc6d826..216fc82f2 100644 --- a/hw/bsp/stm32h7/stm32h7xx_hal_conf.h +++ b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h @@ -1,7 +1,7 @@ /** ****************************************************************************** * @file stm32h7xx_hal_conf_template.h - * @brief HAL configuration template file. + * @brief HAL configuration template file. * This file should be copied to the application folder and renamed * to stm32h7xx_hal_conf.h. ****************************************************************************** @@ -32,7 +32,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32H7xx_HAL_CONF_H @@ -478,6 +478,6 @@ #endif #endif /* __STM32H7xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld index dfefe59f1..d4d5b6ca5 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h index 8ad3e43c8..c8963199b 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -58,43 +58,43 @@ static inline void board_stm32l0_clock_init(void) RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; static RCC_CRSInitTypeDef RCC_CRSInitStruct; - + /* Enable HSI Oscillator to be used as System clock source Enable HSI48 Oscillator to be used as USB clock source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; RCC_OscInitStruct.HSIState = RCC_HSI_ON; RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - + HAL_RCC_OscConfig(&RCC_OscInitStruct); + /* Select HSI48 as USB clock source */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 + + /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 clock dividers */ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); - + /*Configure the clock recovery system (CRS)**********************************/ - + /*Enable CRS Clock*/ - __HAL_RCC_CRS_CLK_ENABLE(); - + __HAL_RCC_CRS_CLK_ENABLE(); + /* Default Synchro Signal division factor (not divided) */ - RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; + RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; /* Set the SYNCSRC[1:0] bits according to CRS_Source value */ - RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; + RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; /* HSI48 is synchronized with USB SOF at 1KHz rate */ RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000); - RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; + RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; /* Set the TRIM[5:0] to the default value*/ - RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; - /* Start automatic synchronization */ + RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; + /* Start automatic synchronization */ HAL_RCCEx_CRSConfig (&RCC_CRSInitStruct); } diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c index dcd71a513..6bce88b39 100644 --- a/hw/bsp/stm32l0/family.c +++ b/hw/bsp/stm32l0/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l0/stm32l0xx_hal_conf.h b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h index cc20ea8e0..e3a131043 100644 --- a/hw/bsp/stm32l0/stm32l0xx_hal_conf.h +++ b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h @@ -2,22 +2,22 @@ ****************************************************************************** * @file stm32l0xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration template file. + * @brief HAL configuration template file. * This file should be copied to the application folder and renamed * to stm32l0xx_hal_conf.h. ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. + *

© Copyright (c) 2016 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the + * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L0xx_HAL_CONF_H @@ -32,9 +32,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /*#define HAL_ADC_MODULE_ENABLED */ /*#define HAL_COMP_MODULE_ENABLED */ /*#define HAL_CRC_MODULE_ENABLED */ @@ -69,9 +69,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -90,7 +90,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator for USB (HSI48) value. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -108,7 +108,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -128,24 +128,24 @@ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ - + /* Tip: To avoid modifying this file each time you need to use different HSE, === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U +#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U #define PREREAD_ENABLE 0U #define BUFFER_CACHE_DISABLE 0U /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -191,13 +191,13 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED #include "stm32l0xx_hal_rcc.h" #endif /* HAL_RCC_MODULE_ENABLED */ - + #ifdef HAL_GPIO_MODULE_ENABLED #include "stm32l0xx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ @@ -233,11 +233,11 @@ #ifdef HAL_FIREWALL_MODULE_ENABLED #include "stm32l0xx_hal_firewall.h" #endif /* HAL_FIREWALL_MODULE_ENABLED */ - + #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32l0xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_I2C_MODULE_ENABLED #include "stm32l0xx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ @@ -257,7 +257,7 @@ #ifdef HAL_LPTIM_MODULE_ENABLED #include "stm32l0xx_hal_lptim.h" #endif /* HAL_LPTIM_MODULE_ENABLED */ - + #ifdef HAL_PWR_MODULE_ENABLED #include "stm32l0xx_hal_pwr.h" #endif /* HAL_PWR_MODULE_ENABLED */ @@ -316,7 +316,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -332,7 +332,6 @@ #endif #endif /* __STM32L0xx_HAL_CONF_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld b/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld index 79427d80b..033dcc0ad 100644 --- a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld +++ b/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l0538disco/stm32l0538disco.c b/hw/bsp/stm32l0538disco/stm32l0538disco.c index f4c38d150..46f6f0ff6 100644 --- a/hw/bsp/stm32l0538disco/stm32l0538disco.c +++ b/hw/bsp/stm32l0538disco/stm32l0538disco.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h b/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h index 773b74e29..a917214c3 100644 --- a/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h +++ b/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h @@ -7,39 +7,39 @@ * * Copyright (c) 2016 STMicroelectronics International N.V. All rights reserved. * - * Redistribution and use in source and binary forms, with or without + * Redistribution and use in source and binary forms, with or without * modification, are permitted, provided that the following conditions are met: * - * 1. Redistribution of source code must retain the above copyright notice, + * 1. Redistribution of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this + * 4. This software, including modifications and/or derivative works of this * software, must execute solely and exclusively on microcontroller or * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L0xx_HAL_CONF_H @@ -54,36 +54,36 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED // #define HAL_ADC_MODULE_ENABLED -/* #define HAL_COMP_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ #define HAL_DMA_MODULE_ENABLED /* #define HAL_FIREWALL_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED /* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LCD_MODULE_ENABLED */ +/* #define HAL_LCD_MODULE_ENABLED */ /* #define HAL_LPTIM_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED //#define HAL_RNG_MODULE_ENABLED /* #define HAL_RTC_MODULE_ENABLED */ //#define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ /* #define HAL_TSC_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_UART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ //#define HAL_PCD_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ @@ -93,9 +93,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -114,7 +114,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -123,7 +123,7 @@ /** * @brief Internal High Speed oscillator for USB (HSI48) value. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -132,7 +132,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -152,24 +152,24 @@ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ - + /* Tip: To avoid modifying this file each time you need to use different HSE, === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U #define PREREAD_ENABLE 1U #define BUFFER_CACHE_DISABLE 0U /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1 */ @@ -185,7 +185,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -199,7 +199,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32l0xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32l0xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -211,7 +211,7 @@ #ifdef HAL_COMP_MODULE_ENABLED #include "stm32l0xx_hal_comp.h" #endif /* HAL_COMP_MODULE_ENABLED */ - + #ifdef HAL_CRC_MODULE_ENABLED #include "stm32l0xx_hal_crc.h" #endif /* HAL_CRC_MODULE_ENABLED */ @@ -231,7 +231,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32l0xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_I2C_MODULE_ENABLED #include "stm32l0xx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ @@ -251,7 +251,7 @@ #ifdef HAL_LPTIM_MODULE_ENABLED #include "stm32l0xx_hal_lptim.h" #endif /* HAL_LPTIM_MODULE_ENABLED */ - + #ifdef HAL_PWR_MODULE_ENABLED #include "stm32l0xx_hal_pwr.h" #endif /* HAL_PWR_MODULE_ENABLED */ @@ -310,7 +310,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -326,6 +326,6 @@ #endif #endif /* __STM32L0xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld index d4b86b3e3..4ae4a4cf4 100644 --- a/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld @@ -83,8 +83,8 @@ SECTIONS . = ALIGN(8); } >FLASH - .ARM.extab : - { + .ARM.extab : + { . = ALIGN(8); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(8); @@ -105,7 +105,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(8); } >FLASH - + .init_array : { . = ALIGN(8); @@ -129,7 +129,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(8); _sdata = .; /* create a global symbol at data start */ @@ -140,7 +140,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -168,7 +168,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -180,5 +180,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h index 704d742cc..72d17b760 100644 --- a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -94,7 +94,7 @@ static inline void board_clock_init(void) RCC_OscInitStruct.PLL.PLLN = 10; RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; - + HAL_RCC_OscConfig(&RCC_OscInitStruct); /** Initializes the CPU, AHB and APB buses clocks @@ -122,7 +122,7 @@ static inline void board_clock_init(void) RCC_CRSInitStruct.HSI48CalibrationValue = 32; HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct); - + /* Select HSI48 output as USB clock source */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld index d6865f49d..3bb13ed85 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld @@ -82,8 +82,8 @@ SECTIONS . = ALIGN(8); } >FLASH - .ARM.extab : - { + .ARM.extab : + { . = ALIGN(8); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(8); @@ -104,7 +104,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(8); } >FLASH - + .init_array : { . = ALIGN(8); @@ -128,7 +128,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(8); _sdata = .; /* create a global symbol at data start */ @@ -139,7 +139,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -167,7 +167,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -179,5 +179,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.h b/hw/bsp/stm32l4/boards/stm32l476disco/board.h index 42c657d5e..9d4351b39 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/board.h +++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld index c1a490a70..02c07dd74 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld @@ -102,12 +102,12 @@ SECTIONS . = ALIGN(4); } >ROM - .ARM.extab : { + .ARM.extab : { . = ALIGN(4); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(4); } >ROM - + .ARM : { . = ALIGN(4); __exidx_start = .; @@ -124,7 +124,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); } >ROM - + .init_array : { . = ALIGN(4); @@ -134,7 +134,7 @@ SECTIONS PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); } >ROM - + .fini_array : { . = ALIGN(4); @@ -149,7 +149,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections into "RAM" Ram type memory */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -158,7 +158,7 @@ SECTIONS . = ALIGN(4); _edata = .; /* define a global symbol at data end */ - + } >RAM AT> ROM /* Uninitialized data section into "RAM" Ram type memory */ diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h index 1df389aed..47ada6bb9 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld index f77c72d1b..267a87a8b 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h index 1df389aed..47ada6bb9 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l4/stm32l4xx_hal_conf.h b/hw/bsp/stm32l4/stm32l4xx_hal_conf.h index 312f86da1..25dbc0523 100644 --- a/hw/bsp/stm32l4/stm32l4xx_hal_conf.h +++ b/hw/bsp/stm32l4/stm32l4xx_hal_conf.h @@ -50,7 +50,7 @@ /* #define HAL_NAND_MODULE_ENABLED */ // #define HAL_NOR_MODULE_ENABLED // #define HAL_SRAM_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED //#define HAL_I2C_MODULE_ENABLED /* #define HAL_IRDA_MODULE_ENABLED */ @@ -115,7 +115,7 @@ * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency * which is subject to manufacturing process variations. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. The real value my vary depending on manufacturing process variations.*/ #endif /* HSI48_VALUE */ @@ -123,7 +123,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -142,7 +142,7 @@ /** * @brief External clock source for SAI1 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source * frequency. */ #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) @@ -151,7 +151,7 @@ /** * @brief External clock source for SAI2 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source * frequency. */ #if !defined (EXTERNAL_SAI2_CLOCK_VALUE) diff --git a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h index 15dffa813..87c3683de 100644 --- a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h +++ b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h @@ -503,4 +503,3 @@ #endif #endif /* STM32U5xx_HAL_CONF_H */ - diff --git a/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld b/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld index 660f30161..916f11866 100644 --- a/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld +++ b/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld @@ -113,7 +113,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -124,7 +124,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM1 AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -152,7 +152,7 @@ SECTIONS . = ALIGN(8); } >RAM1 - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -167,5 +167,3 @@ SECTIONS MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED } - - diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c index 525d637ea..e9ca59866 100644 --- a/hw/bsp/stm32wb/family.c +++ b/hw/bsp/stm32wb/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 Jerzy Kasenberg diff --git a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk index d60365d1d..0ff24ab60 100644 --- a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk +++ b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk @@ -1,5 +1,5 @@ CFLAGS += -DTM4C123GH6PM - + LD_FILE = $(BOARD_PATH)/tm4c123.ld # For flash-jlink target diff --git a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld index e2720a9ac..351857bd6 100644 --- a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld +++ b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld @@ -6,37 +6,37 @@ _Min_Heap_Size = 0; /* required amount of heap */ _Min_Stack_Size = 0x1000; /* required amount of stack */ -MEMORY +MEMORY { FLASH(rx) : ORIGIN = 0x00000000, LENGTH = 256K SRAM(rwx) : ORIGIN = 0x20000000, LENGTH = 32K } -SECTIONS +SECTIONS { - .text : + .text : { . = ALIGN(4) ; - *(.vectors) - *(.text) + *(.vectors) + *(.text) *(.text.*) *(.init) *(.fini) *(.rodata) *(.rodata.*) - . = ALIGN(4) ; - __end_text = . ; + . = ALIGN(4) ; + __end_text = . ; } >FLASH - + .data : AT(ADDR(.text) + SIZEOF(.text)) { . = ALIGN(4); - __start_data = . ; + __start_data = . ; __la_data = LOADADDR(.data); - *(.data) + *(.data) *(.data.*) . = ALIGN(4); - __end_data = . ; + __end_data = . ; } >SRAM @@ -47,7 +47,7 @@ SECTIONS __bss_start__ = __start_bss; *(.bss) *(.bss.*) - *(.COMMON) + *(.COMMON) __end_bss = . ; . = ALIGN(4); }>SRAM diff --git a/hw/bsp/tm4c123/family.c b/hw/bsp/tm4c123/family.c index 87b94289b..3f4f43220 100644 --- a/hw/bsp/tm4c123/family.c +++ b/hw/bsp/tm4c123/family.c @@ -175,4 +175,3 @@ uint32_t board_millis (void) return system_ticks; } #endif - diff --git a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h index 3e2cb9583..2d4764f40 100644 --- a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h +++ b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/mcu/bridgetek/ft9xx/Readme.md b/hw/mcu/bridgetek/ft9xx/Readme.md index 1db91058c..adf8fc765 100644 --- a/hw/mcu/bridgetek/ft9xx/Readme.md +++ b/hw/mcu/bridgetek/ft9xx/Readme.md @@ -2,6 +2,6 @@ **BridgeTek** provides a hardware abstraction library with software source code for the SDKs for FT9xx software family. -Whole SDK repository is installed as part of the FT9xx Toolchain and can be downloaded from BridgeTek web page `https://www.brtchip.com`. +Whole SDK repository is installed as part of the FT9xx Toolchain and can be downloaded from BridgeTek web page `https://www.brtchip.com`. -Registers definition files, and included peripheral register definition files have licenses that allow for redistribution. +Registers definition files, and included peripheral register definition files have licenses that allow for redistribution. diff --git a/hw/mcu/bridgetek/ft9xx/scripts/crt0.S b/hw/mcu/bridgetek/ft9xx/scripts/crt0.S index 62fa266ee..380b31c37 100644 --- a/hw/mcu/bridgetek/ft9xx/scripts/crt0.S +++ b/hw/mcu/bridgetek/ft9xx/scripts/crt0.S @@ -50,11 +50,11 @@ _start: codestart: jmp init - + .global _exithook _exithook: # Debugger uses '_exithook' at 0x90 to catch program exit return - + init: # Disable all interrupts ldk $r0,0x80 @@ -63,12 +63,12 @@ init: .else sta.b 0x100e3,$r0 .endif - + # Reset all peripherals # lda.l $r0, 0x10018 # bins.l $r0, $r0, 0x23F # Set bit 31 # sta.l 0x10018, $r0 - + # Initialize DATA by copying from program memory ldk.l $r0,__data_load_start ldk.l $r1,__data_load_end diff --git a/hw/mcu/dialog/README.md b/hw/mcu/dialog/README.md index 69676f081..33d270aac 100644 --- a/hw/mcu/dialog/README.md +++ b/hw/mcu/dialog/README.md @@ -3,7 +3,5 @@ **Dialog Semiconductors** provides SDKs for DA146x MCU family. Most of the files there can't be redistributed. Registers definition file `DA1469xAB.h` and some **ARM** originated headers are have licenses that allow -for redistribution. +for redistribution. Whole SDK repository can be downloaded from Dialog Semiconductor web page `https://www.dialog.com` - - diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt index b324eb286..7e8067a6f 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt @@ -24,4 +24,3 @@ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h index fdb1a971c..8f871ea31 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h @@ -268,4 +268,3 @@ #endif /* __CMSIS_COMPILER_H */ - diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h index 47a4b59d8..812c3789a 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h @@ -47,9 +47,9 @@ #ifndef __STATIC_INLINE #define __STATIC_INLINE static inline #endif -#ifndef __STATIC_FORCEINLINE +#ifndef __STATIC_FORCEINLINE #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline -#endif +#endif #ifndef __NO_RETURN #define __NO_RETURN __attribute__((__noreturn__)) #endif @@ -586,7 +586,7 @@ __STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure Stack Pointer Limit register hence zero is returned always in non-secure mode. - + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). \return PSPLIM Register value */ @@ -631,7 +631,7 @@ __STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure Stack Pointer Limit register hence the write is silently ignored in non-secure mode. - + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set */ @@ -768,7 +768,7 @@ __STATIC_FORCEINLINE uint32_t __get_FPSCR(void) { #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#if __has_builtin(__builtin_arm_get_fpscr) +#if __has_builtin(__builtin_arm_get_fpscr) // Re-enable using built-in when GCC has been fixed // || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h index e2cf6b966..a8cd3ea45 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h @@ -62,7 +62,7 @@ */ #include "cmsis_version.h" - + /* CMSIS CM0 definitions */ #define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ #define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h index 7249e1331..05b61383e 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h @@ -2065,7 +2065,7 @@ typedef struct /* Special LR values for Secure/Non-Secure call handling and exception handling */ -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ #define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ /* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ @@ -2080,7 +2080,7 @@ typedef struct /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ #define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else +#else #define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ #endif diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h index bc3b05109..50bb56333 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h @@ -103,7 +103,7 @@ (MPU_RLAR_EN_Msk)) #if defined(MPU_RLAR_PXN_Pos) - + /** \brief Region Limit Address Register with PXN value * \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. * \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. @@ -114,7 +114,7 @@ ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ (MPU_RLAR_EN_Msk)) - + #endif /** @@ -124,7 +124,7 @@ typedef struct { uint32_t RBAR; /*!< Region Base Address Register value */ uint32_t RLAR; /*!< Region Limit Address Register value */ } ARM_MPU_Region_t; - + /** Enable the MPU. * \param MPU_Control Default access permissions for unconfigured regions. */ @@ -185,11 +185,11 @@ __STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t at const uint8_t reg = idx / 4U; const uint32_t pos = ((idx % 4U) * 8U); const uint32_t mask = 0xFFU << pos; - + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { return; // invalid index } - + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); } @@ -236,7 +236,7 @@ __STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) * \param rnr Region number to be cleared. */ __STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) -{ +{ ARM_MPU_ClrRegionEx(MPU_NS, rnr); } #endif @@ -246,7 +246,7 @@ __STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) * \param rnr Region number to be configured. * \param rbar Value for RBAR register. * \param rlar Value for RLAR register. -*/ +*/ __STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) { mpu->RNR = rnr; @@ -258,7 +258,7 @@ __STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t r * \param rnr Region number to be configured. * \param rbar Value for RBAR register. * \param rlar Value for RLAR register. -*/ +*/ __STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) { ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); @@ -269,10 +269,10 @@ __STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rla * \param rnr Region number to be configured. * \param rbar Value for RBAR register. * \param rlar Value for RLAR register. -*/ +*/ __STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) { - ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); } #endif @@ -284,7 +284,7 @@ __STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t __STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) { uint32_t i; - for (i = 0U; i < len; ++i) + for (i = 0U; i < len; ++i) { dst[i] = src[i]; } @@ -296,7 +296,7 @@ __STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_ * \param table Pointer to the MPU configuration table. * \param cnt Amount of regions to be configured. */ -__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) { const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; if (cnt == 1U) { @@ -305,7 +305,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ } else { uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; - + mpu->RNR = rnrBase; while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { uint32_t c = MPU_TYPE_RALIASES - rnrOffset; @@ -316,7 +316,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ rnrBase += MPU_TYPE_RALIASES; mpu->RNR = rnrBase; } - + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); } } @@ -326,7 +326,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ * \param table Pointer to the MPU configuration table. * \param cnt Amount of regions to be configured. */ -__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) { ARM_MPU_LoadEx(MPU, rnr, table, cnt); } @@ -337,11 +337,10 @@ __STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, u * \param table Pointer to the MPU configuration table. * \param cnt Amount of regions to be configured. */ -__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) { ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); } #endif #endif - diff --git a/hw/mcu/dialog/da1469x/da1469x.ld b/hw/mcu/dialog/da1469x/da1469x.ld index c91dea841..0133f3759 100644 --- a/hw/mcu/dialog/da1469x/da1469x.ld +++ b/hw/mcu/dialog/da1469x/da1469x.ld @@ -225,4 +225,3 @@ SECTIONS /* Check that intvect is at the beginning of RAM */ ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") } - diff --git a/hw/mcu/dialog/da1469x/include/mcu/mcu.h b/hw/mcu/dialog/da1469x/include/mcu/mcu.h index 1e6736785..38961e828 100644 --- a/hw/mcu/dialog/da1469x/include/mcu/mcu.h +++ b/hw/mcu/dialog/da1469x/include/mcu/mcu.h @@ -162,4 +162,3 @@ void mcu_gpio_exit_sleep(void); #endif #endif /* __MCU_MCU_H_ */ - diff --git a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h index 76a432bfd..9ba24f458 100644 --- a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h +++ b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h @@ -539,7 +539,7 @@ SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const *p_v /**@brief Remove a Vendor Specific base UUID. - * + * * @details This call removes a Vendor Specific base UUID that has been added with @ref sd_ble_uuid_vs_add. This function allows * the application to reuse memory allocated for Vendor Specific base UUIDs. * diff --git a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h index c434fefb3..e11149435 100644 --- a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h +++ b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h @@ -1666,7 +1666,7 @@ SVCALL(SD_BLE_GAP_ADDR_GET, uint32_t, sd_ble_gap_addr_get(ble_gap_addr_t *p_addr * * @retval ::NRF_SUCCESS Address successfully retrieved. * @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied. - * @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. + * @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. * @retval ::NRF_ERROR_INVALID_STATE The advertising set is currently not advertising. */ SVCALL(SD_BLE_GAP_ADV_ADDR_GET, uint32_t, sd_ble_gap_adv_addr_get(uint8_t adv_handle, ble_gap_addr_t *p_addr)); diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c index a7ae013dd..c8de8e0f3 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c @@ -62,7 +62,7 @@ Additional information: WrOff == (RdOff - 1): Buffer is full WrOff > RdOff: Free space includes wrap-around WrOff < RdOff: Used space includes wrap-around - (WrOff == (SizeOfBuffer - 1)) && (RdOff == 0): + (WrOff == (SizeOfBuffer - 1)) && (RdOff == 0): Buffer full and wrap-around after next byte @@ -504,7 +504,7 @@ static unsigned _GetAvailWriteSpace(SEGGER_RTT_BUFFER_UP* pRing) { * Reads characters from SEGGER real-time-terminal control block * which have been previously stored by the application. * Do not lock against interrupts and multiple access. -* Used to do the same operation that J-Link does, to transfer +* Used to do the same operation that J-Link does, to transfer * RTT data via other channels, such as TCP/IP or UART. * * Parameters @@ -693,7 +693,7 @@ unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned Buffe * Function description * Reads characters from SEGGER real-time-terminal control block * which have been previously stored by the application. -* Used to do the same operation that J-Link does, to transfer +* Used to do the same operation that J-Link does, to transfer * RTT data via other channels, such as TCP/IP or UART. * * Parameters @@ -708,7 +708,7 @@ unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned Buffe * This function must not be called when J-Link might also do RTT. * This function locks against all other RTT operations. I.e. during * the read operation, writing is also locked. -* If only one consumer reads from the up buffer, +* If only one consumer reads from the up buffer, * call sEGGER_RTT_ReadUpBufferNoLock() instead. */ unsigned SEGGER_RTT_ReadUpBuffer(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) { @@ -766,7 +766,7 @@ unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSiz * Function description * Stores a specified number of characters in SEGGER RTT * control block. -* SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application +* SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application * and overwrites data if the data does not fit into the buffer. * * Parameters @@ -779,7 +779,7 @@ unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSiz * (2) For performance reasons this function does not call Init() * and may only be called after RTT has been initialized. * Either by calling SEGGER_RTT_Init() or calling another RTT API function first. -* (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link +* (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link * connection reads RTT data. */ void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { @@ -946,7 +946,7 @@ CopyStraight: * Stores a specified number of characters in SEGGER RTT * control block inside a buffer. * SEGGER_RTT_WriteDownBufferNoLock does not lock the application. -* Used to do the same operation that J-Link does, to transfer +* Used to do the same operation that J-Link does, to transfer * RTT data from other channels, such as TCP/IP or UART. * * Parameters @@ -1116,7 +1116,7 @@ unsigned SEGGER_RTT_WriteNoLock(unsigned BufferIndex, const void* pBuffer, unsig * This function must not be called when J-Link might also do RTT. * This function locks against all other RTT operations. I.e. during * the write operation, writing from the application is also locked. -* If only one consumer writes to the down buffer, +* If only one consumer writes to the down buffer, * call SEGGER_RTT_WriteDownBufferNoLock() instead. */ unsigned SEGGER_RTT_WriteDownBuffer(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT.h b/lib/SEGGER_RTT/RTT/SEGGER_RTT.h index 3c04df55f..07eb4f39e 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT.h +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT.h @@ -44,7 +44,7 @@ ---------------------------END-OF-HEADER------------------------------ File : SEGGER_RTT.h Purpose : Implementation of SEGGER real-time transfer which allows - real-time communication on targets which support debugger + real-time communication on targets which support debugger memory accesses while the CPU is running. Revision: $Rev: 17697 $ ---------------------------------------------------------------------- diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S b/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S index 78cde4d75..aec372eec 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S @@ -36,9 +36,9 @@ Additional information: #define _THUMB_CODE .code 16 #define _WORD .word #define _SECTION(Sect, Type, AlignExp) .section Sect ##, "ax" - #define _ALIGN(Exp) .align Exp + #define _ALIGN(Exp) .align Exp #define _PLACE_LITS .ltorg - #define _DATA_SECT_START + #define _DATA_SECT_START #define _C_STARTUP _start #define _STACK_END __stack_end__ #define _RAMFUNC @@ -58,7 +58,7 @@ Additional information: #define _THUMB_CODE THUMB #define _WORD DCD #define _SECTION(Sect, Type, AlignExp) SECTION Sect ## : ## Type ## :REORDER:NOROOT ## (AlignExp) - #define _ALIGN(Exp) alignrom Exp + #define _ALIGN(Exp) alignrom Exp #define _PLACE_LITS #define _DATA_SECT_START DATA #define _C_STARTUP __iar_program_start diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h b/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h index 5e79d7e67..fda5a5f51 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h @@ -91,12 +91,12 @@ Revision: $Rev: 18601 $ * * RTT memcpy configuration * -* memcpy() is good for large amounts of data, +* memcpy() is good for large amounts of data, * but the overhead is big for small amounts, which are usually stored via RTT. * With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead. * * SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions. -* This is may be required with memory access restrictions, +* This is may be required with memory access restrictions, * such as on Cortex-A devices with MMU. */ #ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP @@ -105,7 +105,7 @@ Revision: $Rev: 18601 $ // // Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets // -//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__)) +//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__)) // #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) SEGGER_memcpy((pDest), (pSrc), (NumBytes)) //#endif @@ -204,7 +204,7 @@ Revision: $Rev: 18601 $ : \ : \ ); - + #define SEGGER_RTT_UNLOCK() __asm volatile ("csrr a1, mstatus \n\t" \ "or %0, %0, a1 \n\t" \ "csrs mstatus, %0 \n\t" \ @@ -345,8 +345,8 @@ Revision: $Rev: 18601 $ #define SEGGER_RTT_LOCK() { \ unsigned long LockState; \ LockState = get_psw() & 0x010000; \ - clrpsw_i(); - + clrpsw_i(); + #define SEGGER_RTT_UNLOCK() set_psw(get_psw() | LockState); \ } #endif diff --git a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c index da4a4b5f5..6bf670a02 100644 --- a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c +++ b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c @@ -44,7 +44,7 @@ ---------------------------END-OF-HEADER------------------------------ File : SEGGER_RTT_Syscalls_GCC.c Purpose : Low-level functions for using printf() via RTT in GCC. - To use RTT for printf output, include this file in your + To use RTT for printf output, include this file in your application. Revision: $Rev: 17697 $ ---------------------------------------------------------------------- @@ -62,7 +62,7 @@ Revision: $Rev: 17697 $ ********************************************************************** */ // -// If necessary define the _reent struct +// If necessary define the _reent struct // to match the one passed by the used standard library. // struct _reent; diff --git a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c index f7f5aed48..ba9772d3e 100644 --- a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c +++ b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c @@ -110,7 +110,7 @@ const char __stderr_name[] = "STDERR"; * * Parameters: * c - character to output -* +* */ void _ttywrch(int c) { fputc(c, stdout); // stdout @@ -127,9 +127,9 @@ void _ttywrch(int c) { * Parameters: * sName - sName of the device/file to open * OpenMode - This parameter is currently ignored -* +* * Return value: -* != 0 - Handle to the object to open, otherwise +* != 0 - Handle to the object to open, otherwise * == 0 -"device" is not handled by this module * */ @@ -153,7 +153,7 @@ FILEHANDLE _sys_open(const char * sName, int OpenMode) { * * Parameters: * hFile - Handle to a file opened via _sys_open -* +* * Return value: * 0 - device/file closed * @@ -176,7 +176,7 @@ int _sys_close(FILEHANDLE hFile) { * pBuffer - Pointer to the data that shall be written * NumBytes - Number of bytes to write * Mode - The Mode that shall be used -* +* * Return value: * Number of bytes *not* written to the file/device * @@ -205,7 +205,7 @@ int _sys_write(FILEHANDLE hFile, const unsigned char * pBuffer, unsigned NumByte * pBuffer - Pointer to buffer to store the read data * NumBytes - Number of bytes to read * Mode - The Mode that shall be used -* +* * Return value: * Number of bytes read from the file/device * @@ -223,12 +223,12 @@ int _sys_read(FILEHANDLE hFile, unsigned char * pBuffer, unsigned NumBytes, int * _sys_istty * * Function description: -* This function shall return whether the opened file +* This function shall return whether the opened file * is a console device or not. * * Parameters: * hFile - Handle to a file opened via _sys_open -* +* * Return value: * 1 - Device is a console * 0 - Device is not a console @@ -250,10 +250,10 @@ int _sys_istty(FILEHANDLE hFile) { * * Parameters: * hFile - Handle to a file opened via _sys_open -* Pos - -* +* Pos - +* * Return value: -* int - +* int - * */ int _sys_seek(FILEHANDLE hFile, long Pos) { @@ -267,13 +267,13 @@ int _sys_seek(FILEHANDLE hFile, long Pos) { * _sys_ensure * * Function description: -* +* * * Parameters: * hFile - Handle to a file opened via _sys_open -* +* * Return value: -* int - +* int - * */ int _sys_ensure(FILEHANDLE hFile) { @@ -290,7 +290,7 @@ int _sys_ensure(FILEHANDLE hFile) { * * Parameters: * hFile - Handle to a file opened via _sys_open -* +* * Return value: * Length of the file * @@ -305,17 +305,17 @@ long _sys_flen(FILEHANDLE hFile) { * _sys_tmpnam * * Function description: -* This function converts the file number fileno for a temporary +* This function converts the file number fileno for a temporary * file to a unique filename, for example, tmp0001. * * Parameters: * pBuffer - Pointer to a buffer to store the name * FileNum - file number to convert * MaxLen - Size of the buffer -* +* * Return value: * 1 - Error -* 0 - Success +* 0 - Success * */ int _sys_tmpnam(char * pBuffer, int FileNum, unsigned MaxLen) { @@ -335,7 +335,7 @@ int _sys_tmpnam(char * pBuffer, int FileNum, unsigned MaxLen) { * Parameters: * cmd - Pointer to the command string * len - Length of the string -* +* * Return value: * == NULL - Command was not successfully executed * == sCmd - Command was passed successfully @@ -355,7 +355,7 @@ char * _sys_command_string(char * cmd, int len) { * * Parameters: * ReturnCode - Return code from the main function -* +* * */ void _sys_exit(int ReturnCode) { @@ -373,7 +373,7 @@ void _sys_exit(int ReturnCode) { * * Parameters: * ch - Character to output -* +* * */ int stdout_putchar(int ch) { diff --git a/lib/fatfs/source/00history.txt b/lib/fatfs/source/00history.txt index 7a153a229..f7898cbd9 100644 --- a/lib/fatfs/source/00history.txt +++ b/lib/fatfs/source/00history.txt @@ -366,4 +366,3 @@ R0.15 (November 6, 2022) Fixed f_mkfs() creates broken exFAT volume when the size of volume is >= 2^32 sectors. Fixed string functions cannot write the unicode characters not in BMP when FF_LFN_UNICODE == 2 (UTF-8). Fixed a compatibility issue in identification of GPT header. - diff --git a/lib/fatfs/source/00readme.txt b/lib/fatfs/source/00readme.txt index 3de3aeaa2..48c02a42d 100644 --- a/lib/fatfs/source/00readme.txt +++ b/lib/fatfs/source/00readme.txt @@ -18,4 +18,3 @@ FILES module is only a generic file system layer and it does not depend on any specific storage device. You need to provide a low level disk I/O module written to control the storage device that attached to the target system. - diff --git a/lib/fatfs/source/diskio.c b/lib/fatfs/source/diskio.c index 179e387a2..3cb423db3 100644 --- a/lib/fatfs/source/diskio.c +++ b/lib/fatfs/source/diskio.c @@ -226,4 +226,3 @@ DRESULT disk_ioctl ( return RES_PARERR; } - diff --git a/lib/fatfs/source/ff.c b/lib/fatfs/source/ff.c index 6d412fa0e..05ca02f0a 100644 --- a/lib/fatfs/source/ff.c +++ b/lib/fatfs/source/ff.c @@ -7081,4 +7081,3 @@ FRESULT f_setcp ( return FR_OK; } #endif /* FF_CODE_PAGE == 0 */ - diff --git a/lib/fatfs/source/ffsystem.c b/lib/fatfs/source/ffsystem.c index d5c5134bf..bc0047dce 100644 --- a/lib/fatfs/source/ffsystem.c +++ b/lib/fatfs/source/ffsystem.c @@ -205,4 +205,3 @@ void ff_mutex_give ( } #endif /* FF_FS_REENTRANT */ - diff --git a/lib/networking/dhserver.c b/lib/networking/dhserver.c index 8cd22ddb9..2f14f7a09 100644 --- a/lib/networking/dhserver.c +++ b/lib/networking/dhserver.c @@ -2,17 +2,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE @@ -267,7 +267,7 @@ static void udp_recv_proc(void *arg, struct udp_pcb *upcb, struct pbuf *p, const DHCP_OFFER, config->domain, config->dns, - entry->lease, + entry->lease, *netif_ip4_addr(netif), config->router, *netif_ip4_netmask(netif)); @@ -309,7 +309,7 @@ static void udp_recv_proc(void *arg, struct udp_pcb *upcb, struct pbuf *p, const DHCP_ACK, config->domain, config->dns, - entry->lease, + entry->lease, *netif_ip4_addr(netif), config->router, *netif_ip4_netmask(netif)); diff --git a/lib/networking/dhserver.h b/lib/networking/dhserver.h index 2a0b15854..b3642459a 100644 --- a/lib/networking/dhserver.h +++ b/lib/networking/dhserver.h @@ -2,17 +2,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE diff --git a/lib/networking/dnserver.c b/lib/networking/dnserver.c index 539cc2cea..6d15fee02 100644 --- a/lib/networking/dnserver.c +++ b/lib/networking/dnserver.c @@ -2,17 +2,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE @@ -165,7 +165,7 @@ static void udp_recv_proc(void *arg, struct udp_pcb *upcb, struct pbuf *p, const answer->ttl = htonl(32); answer->len = htons(4); answer->addr = host_addr.addr; - + udp_sendto(upcb, out, addr, port); pbuf_free(out); diff --git a/lib/networking/dnserver.h b/lib/networking/dnserver.h index a062e3aa7..50b29be89 100644 --- a/lib/networking/dnserver.h +++ b/lib/networking/dnserver.h @@ -2,17 +2,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE diff --git a/lib/networking/ndis.h b/lib/networking/ndis.h index 06258e6bb..29b07749c 100644 --- a/lib/networking/ndis.h +++ b/lib/networking/ndis.h @@ -16,14 +16,14 @@ */ /* - * ndis.h - * + * ndis.h + * * Modified by Colin O'Flynn * ntddndis.h modified by Benedikt Spranger - * - * Thanks to the cygwin development team, + * + * Thanks to the cygwin development team, * especially to Casper S. Hornstrup - * + * * THIS SOFTWARE IS NOT COPYRIGHTED * * This source code is offered for use in the public domain. You may diff --git a/lib/networking/rndis_protocol.h b/lib/networking/rndis_protocol.h index b45860eeb..3d07d6fa3 100644 --- a/lib/networking/rndis_protocol.h +++ b/lib/networking/rndis_protocol.h @@ -39,7 +39,7 @@ #ifndef _RNDIS_H #define _RNDIS_H -/** +/** \addtogroup RNDIS @{ */ @@ -112,7 +112,7 @@ typedef struct{ rndis_MinorVersion_t MinorVersion; rndis_MaxTransferSize_t MaxTransferSize; } rndis_initialize_msg_t; - + /* Response: */ typedef struct{ rndis_MessageType_t MessageType; @@ -129,7 +129,7 @@ typedef struct{ rndis_AfListOffset_t AfListOffset; rndis_AfListSize_t AfListSize; } rndis_initialize_cmplt_t; - + /*** Remote NDIS Halt Message ***/ typedef struct{ @@ -137,7 +137,7 @@ typedef struct{ rndis_MessageLength_t MessageLength; rndis_RequestId_t RequestId; } rndis_halt_msg_t; - + typedef uint32_t rndis_Oid_t; typedef uint32_t rndis_InformationBufferLength_t; typedef uint32_t rndis_InformationBufferOffset_t; @@ -153,7 +153,7 @@ typedef struct{ rndis_InformationBufferOffset_t InformationBufferOffset; rndis_DeviceVcHandle_t DeviceVcHandle; } rndis_query_msg_t; - + /* Response: */ typedef struct{ @@ -164,7 +164,7 @@ typedef struct{ rndis_InformationBufferLength_t InformationBufferLength; rndis_InformationBufferOffset_t InformationBufferOffset; } rndis_query_cmplt_t; - + /*** Remote NDIS Set Message ***/ typedef struct{ rndis_MessageType_t MessageType; @@ -175,7 +175,7 @@ typedef struct{ rndis_InformationBufferOffset_t InformationBufferOffset; rndis_DeviceVcHandle_t DeviceVcHandle; } rndis_set_msg_t; - + /* Response */ typedef struct{ rndis_MessageType_t MessageType; @@ -199,9 +199,9 @@ typedef struct{ rndis_ParameterNameLength_t ParameterNameLength; rndis_ParameterType_t ParameterType; rndis_ParameterValueOffset_t ParameterValueOffset; - rndis_ParameterValueLength_t ParameterValueLength; + rndis_ParameterValueLength_t ParameterValueLength; }rndis_config_parameter_t; - + typedef uint32_t rndis_Reserved_t; /*** Remote NDIS Soft Reset Message ***/ @@ -210,7 +210,7 @@ typedef struct{ rndis_MessageLength_t MessageLength; rndis_Reserved_t Reserved; } rndis_reset_msg_t; - + typedef uint32_t rndis_AddressingReset_t; /* Response: */ @@ -220,7 +220,7 @@ typedef struct{ rndis_Status_t Status; rndis_AddressingReset_t AddressingReset; } rndis_reset_cmplt_t; - + /*** Remote NDIS Indicate Status Message ***/ typedef struct{ rndis_MessageType_t MessageType; @@ -229,7 +229,7 @@ typedef struct{ rndis_Status_t StatusBufferLength; rndis_Status_t StatusBufferOffset; } rndis_indicate_status_t; - + typedef uint32_t rndis_DiagStatus_t; typedef uint32_t rndis_ErrorOffset_t; @@ -237,14 +237,14 @@ typedef struct { rndis_DiagStatus_t DiagStatus; rndis_ErrorOffset_t ErrorOffset; }rndis_diagnostic_info_t; - + /*** Remote NDIS Keepalive Message */ typedef struct{ rndis_MessageType_t MessageType; rndis_MessageLength_t MessageLength; rndis_RequestId_t RequestId; }rndis_keepalive_msg_t; - + /* Response: */ typedef struct{ rndis_MessageType_t MessageType; diff --git a/lib/networking/rndis_reports.c b/lib/networking/rndis_reports.c index d129466c8..cc14f174c 100644 --- a/lib/networking/rndis_reports.c +++ b/lib/networking/rndis_reports.c @@ -7,17 +7,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE @@ -45,7 +45,7 @@ static rndis_state_t rndis_state; CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t ndis_report[8] = { 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; -static const uint32_t OIDSupportedList[] = +static const uint32_t OIDSupportedList[] = { OID_GEN_SUPPORTED_LIST, OID_GEN_HARDWARE_STATUS, @@ -203,8 +203,8 @@ static void rndis_handle_set_msg(void) { rndis_packetFilter(oid_packet_filter); rndis_state = rndis_data_initialized; - } - else + } + else { rndis_state = rndis_initialized; } @@ -266,7 +266,7 @@ void rndis_class_set_handler(uint8_t *data, int size) case REMOTE_NDIS_QUERY_MSG: rndis_query(); break; - + case REMOTE_NDIS_SET_MSG: rndis_handle_set_msg(); break; diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index ba497906b..70d431282 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -824,10 +824,10 @@ typedef struct TU_ATTR_PACKED uint8_t type : 2; ///< Request type tusb_request_type_t. uint8_t direction : 1; ///< Direction type. tusb_dir_t } bmRequestType_bit; - + uint8_t bmRequestType; }; - + uint8_t bRequest; ///< Request type audio_cs_req_t uint8_t bChannelNumber; uint8_t bControlSelector; diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index f21dfee64..32ba5761e 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Reinhard Panhuber, Jerzy Kasenberg @@ -1525,7 +1525,7 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin #endif } } - + } } p_desc = tu_desc_next(p_desc); @@ -2124,7 +2124,7 @@ bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 { if (tud_audio_fb_done_cb) tud_audio_fb_done_cb(func_id); - // Schedule a transmit with the new value if EP is not busy + // Schedule a transmit with the new value if EP is not busy if (!usbd_edpt_busy(rhport, audio->ep_fb)) { // Schedule next transmission - value is changed bytud_audio_n_fb_set() in the meantime or the old value gets sent diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 0ef100fa4..7c88b99fc 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Ha Thach (tinyusb.org) @@ -473,7 +473,7 @@ TU_ATTR_WEAK void tud_audio_fb_done_cb(uint8_t func_id); // the choice of format is left to the caller and feedback argument is sent as-is. If CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION is set, then tinyusb // expects 16.16 format and handles the conversion to 10.14 on FS. // -// Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 devices. On Linux and macOS it seems the +// Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 devices. On Linux and macOS it seems the // driver can work with either format. So a good compromise is to keep format correction disabled and stick to 16.16 format. // Feedback value can be determined from within the SOF ISR of the audio driver. This should reduce jitter. If the feature is used, the user can not set the feedback value. diff --git a/src/class/bth/bth_device.h b/src/class/bth/bth_device.h index 1b90d0915..921bd7a1a 100755 --- a/src/class/bth/bth_device.h +++ b/src/class/bth/bth_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index f372fe462..a82ef1d62 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -386,7 +386,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t bool const rts = tu_bit_test(request->wValue, 1); p_cdc->line_state = (uint8_t) request->wValue; - + // Disable fifo overwriting if DTR bit is set tu_fifo_set_overwritable(&p_cdc->tx_ff, !dtr); @@ -433,7 +433,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ if ( ep_addr == p_cdc->ep_out ) { tu_fifo_write_n(&p_cdc->rx_ff, p_cdc->epout_buf, (uint16_t) xferred_bytes); - + // Check for wanted char and invoke callback if needed if ( tud_cdc_rx_wanted_cb && (((signed char) p_cdc->wanted_char) != -1) ) { @@ -445,14 +445,14 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ } } } - + // invoke receive callback (if there is still data) if (tud_cdc_rx_cb && !tu_fifo_empty(&p_cdc->rx_ff) ) tud_cdc_rx_cb(itf); - + // prepare for OUT transaction _prep_out_transaction(p_cdc); } - + // Data sent to host, we continue to fetch from tx fifo to send. // Note: This will cause incorrect baudrate set in line coding. // Though maybe the baudrate is not really important !!! diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index f8a004df4..a6e07aa5c 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/cdc/cdc_host.h b/src/class/cdc/cdc_host.h index c759527e6..4090d0e9f 100644 --- a/src/class/cdc/cdc_host.h +++ b/src/class/cdc/cdc_host.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/cdc/cdc_rndis.h b/src/class/cdc/cdc_rndis.h index e0f129fe3..ad153e0ac 100644 --- a/src/class/cdc/cdc_rndis.h +++ b/src/class/cdc/cdc_rndis.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/cdc/cdc_rndis_host.c b/src/class/cdc/cdc_rndis_host.c index 44de85b45..41d21bbad 100644 --- a/src/class/cdc/cdc_rndis_host.c +++ b/src/class/cdc/cdc_rndis_host.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/cdc/cdc_rndis_host.h b/src/class/cdc/cdc_rndis_host.h index 447cc4e97..bb431ec1f 100644 --- a/src/class/cdc/cdc_rndis_host.h +++ b/src/class/cdc/cdc_rndis_host.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/hid/hid.h b/src/class/hid/hid.h index d9b0ead10..fbd3eef38 100644 --- a/src/class/hid/hid.h +++ b/src/class/hid/hid.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/midi/midi.h b/src/class/midi/midi.h index 74dc41749..8b78c6555 100644 --- a/src/class/midi/midi.h +++ b/src/class/midi/midi.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index 5dea43431..e3e7826da 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/midi/midi_device.h b/src/class/midi/midi_device.h index 211edc8d1..1c6f996be 100644 --- a/src/class/midi/midi_device.h +++ b/src/class/midi/midi_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/msc/msc.h b/src/class/msc/msc.h index 84b6e4d79..7f25a29ba 100644 --- a/src/class/msc/msc.h +++ b/src/class/msc/msc.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index 5839b168d..72f95be06 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index 6724e486c..2fddeb818 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -232,23 +232,23 @@ bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void * buffer, uint32_t lba, msc_cbw_t cbw; cbw_init(&cbw, lun); - + cbw.total_bytes = block_count*p_msc->capacity[lun].block_size; cbw.dir = TUSB_DIR_IN_MASK; cbw.cmd_len = sizeof(scsi_read10_t); - + scsi_read10_t const cmd_read10 = { .cmd_code = SCSI_CMD_READ_10, .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - + memcpy(cbw.command, &cmd_read10, cbw.cmd_len); - + return tuh_msc_scsi_command(dev_addr, &cbw, buffer, complete_cb, arg); } - + bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); diff --git a/src/class/msc/msc_host.h b/src/class/msc/msc_host.h index 5134b63c2..6c0e5c9dd 100644 --- a/src/class/msc/msc_host.h +++ b/src/class/msc/msc_host.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/net/ecm_rndis_device.c b/src/class/net/ecm_rndis_device.c index a072bfd79..8ac7cbd01 100644 --- a/src/class/net/ecm_rndis_device.c +++ b/src/class/net/ecm_rndis_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Peter Lawrence diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index aa13c9535..9e9580249 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -430,7 +430,7 @@ static void handle_incoming_datagram(uint32_t len) { ncm_interface.num_datagrams++; } - + tud_network_recv_renew(); } diff --git a/src/class/net/net_device.h b/src/class/net/net_device.h index 6e294465b..133689deb 100644 --- a/src/class/net/net_device.h +++ b/src/class/net/net_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Peter Lawrence diff --git a/src/class/usbtmc/usbtmc.h b/src/class/usbtmc/usbtmc.h index fd52d766e..3c5e86d4c 100644 --- a/src/class/usbtmc/usbtmc.h +++ b/src/class/usbtmc/usbtmc.h @@ -316,4 +316,3 @@ typedef struct TU_ATTR_PACKED TU_VERIFY_STATIC(sizeof(usbtmc_read_stb_interrupt_488_t) == 2u, "struct wrong length"); #endif - diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index a4e6eaeb3..8dbda14c5 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -83,7 +83,7 @@ tu_static char logMsg[150]; // Buffer size must be an exact multiple of the max packet size for both // bulk (up to 64 bytes for FS, 512 bytes for HS). In addation, this driver -// imposes a minimum buffer size of 32 bytes. +// imposes a minimum buffer size of 32 bytes. #define USBTMCD_BUFFER_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) /* @@ -598,7 +598,7 @@ bool usbtmcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request uint32_t ep_addr = (request->wIndex); // At this point, a transfer MAY be in progress. Based on USB spec, when clearing bulk EP HALT, - // the EP transfer buffer needs to be cleared and DTOG needs to be reset, even if + // the EP transfer buffer needs to be cleared and DTOG needs to be reset, even if // the EP is not halted. The only USBD API interface to do this is to stall and then un-stall the EP. if(ep_addr == usbtmc_state.ep_bulk_out) { diff --git a/src/class/vendor/vendor_device.h b/src/class/vendor/vendor_device.h index 2bb6afa67..9abafda50 100644 --- a/src/class/vendor/vendor_device.h +++ b/src/class/vendor/vendor_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/vendor/vendor_host.c b/src/class/vendor/vendor_host.c index dbea1228d..e66c5007f 100644 --- a/src/class/vendor/vendor_host.c +++ b/src/class/vendor/vendor_host.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/vendor/vendor_host.h b/src/class/vendor/vendor_host.h index 65223fbca..acfebe7a4 100644 --- a/src/class/vendor/vendor_host.h +++ b/src/class/vendor/vendor_host.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 02a490aee..d6e98602b 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Koji KITAYAMA diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 30478ba6d..1057d7ca3 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -239,7 +239,7 @@ #define TU_BSWAP16(u16) ((unsigned short)_builtin_revw((unsigned long)u16)) #define TU_BSWAP32(u32) (_builtin_revl(u32)) -#else +#else #error "Compiler attribute porting is required" #endif diff --git a/src/common/tusb_timeout.h b/src/common/tusb_timeout.h index ce53955f0..533e67ab8 100644 --- a/src/common/tusb_timeout.h +++ b/src/common/tusb_timeout.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index a52a6d269..12355e8be 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/device/dcd.h b/src/device/dcd.h index 93170732f..00419ff05 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/device/usbd.c b/src/device/usbd.c index 7733cc2e2..0fb236a88 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -1398,11 +1398,11 @@ bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep uint8_t const epnum = tu_edpt_number(desc_ep->bEndpointAddress); uint8_t const dir = tu_edpt_dir(desc_ep->bEndpointAddress); - + TU_ASSERT(dcd_edpt_iso_activate); TU_ASSERT(epnum < CFG_TUD_ENDPPOINT_MAX); TU_ASSERT(tu_edpt_validate(desc_ep, (tusb_speed_t) _usbd_dev.speed)); - + _usbd_dev.ep_status[epnum][dir].stalled = false; _usbd_dev.ep_status[epnum][dir].busy = false; _usbd_dev.ep_status[epnum][dir].claimed = false; diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index f860ab0a1..8393d3469 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/host/hcd.h b/src/host/hcd.h index a400626e4..623c12a12 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/host/hub.c b/src/host/hub.c index 3da5358b2..b84042fb6 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -202,7 +202,7 @@ bool hub_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType && TUSB_XFER_INTERRUPT == desc_ep->bmAttributes.xfer, 0); - + TU_ASSERT(tuh_edpt_open(dev_addr, desc_ep)); hub_interface_t* p_hub = get_itf(dev_addr); diff --git a/src/host/usbh.h b/src/host/usbh.h index 37de7093c..7942de5c2 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/osal/osal.h b/src/osal/osal.h index afa3826fc..f092e8ffb 100644 --- a/src/osal/osal.h +++ b/src/osal/osal.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 9393d1f26..477f64892 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 2e2b3c7ce..5f407378e 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index 8b428d642..e6efa0968 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. diff --git a/src/osal/osal_rtx4.h b/src/osal/osal_rtx4.h index dea1c12c8..e443135e0 100644 --- a/src/osal/osal_rtx4.h +++ b/src/osal/osal_rtx4.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Tian Yunhao (t123yh) @@ -115,7 +115,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd os_mbx_declare(_name##__mbox, _depth); \ _declare_box(_name##__pool, sizeof(_type), _depth); \ osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .pool = _name##__pool, .mbox = _name##__mbox }; - + typedef struct { diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index efca5bdcb..95dfda49c 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright 2021 Bridgetek Pte Ltd @@ -24,15 +24,15 @@ * This file is part of the TinyUSB stack. */ -/* - * Contains code adapted from Bridgetek Pte Ltd via license terms stated +/* + * Contains code adapted from Bridgetek Pte Ltd via license terms stated * in https://brtchip.com/BRTSourceCodeLicenseAgreement */ #include "tusb_option.h" #if CFG_TUD_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X) + (CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X) #include #include @@ -58,7 +58,7 @@ struct ft9xx_xfer_state { volatile uint8_t ready; // OUT Transfer has been received and waiting for transfer. volatile uint8_t valid; // Transfer is pending and total_size, remain_size, and buff_ptr are valid. - + int16_t total_size; // Total transfer size in bytes for this transfer. int16_t remain_size; // Total remaining in transfer. uint8_t *buff_ptr; // Pointer to buffer to transmit from or receive to. @@ -92,7 +92,7 @@ static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t len // Manage an OUT transfer from the host. // This can be up-to the maximum packet size of the endpoint. -// Continuation of a transfer beyond the maximum packet size is performed +// Continuation of a transfer beyond the maximum packet size is performed // by the interrupt handler. static uint16_t _ft9xx_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes) { @@ -125,7 +125,7 @@ static uint16_t _ft9xx_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_ // Manage an IN transfer to the host. // This can be up-to the maximum packet size of the endpoint. -// Continuation of a transfer beyond the maximum packet size is performed +// Continuation of a transfer beyond the maximum packet size is performed // by the interrupt handler. static uint16_t _ft9xx_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes) { @@ -196,7 +196,7 @@ static uint16_t _ft9xx_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t return xfer_bytes; } -// Reset all non-control endpoints to a default state. +// Reset all non-control endpoints to a default state. // Control endpoint is always enabled and ready. All others disabled. static void _ft9xx_reset_edpts(void) { @@ -208,7 +208,7 @@ static void _ft9xx_reset_edpts(void) // Disable hardware. USBD_EP_CR_REG(i) = 0; } - + // Enable interrupts from USB device control. USBD_REG(cmie) = MASK_USBD_CMIE_ALL; } @@ -319,7 +319,7 @@ static void _dcd_ft9xx_detach(void) } // Determine the speed of the USB to which we are connected. -// Set the speed of the PHY accordingly. +// Set the speed of the PHY accordingly. // High speed can be disabled through CFG_TUSB_RHPORT0_MODE or CFG_TUD_MAX_SPEED settings. static void _ft9xx_usb_speed(void) { @@ -379,16 +379,16 @@ static void _ft9xx_usb_speed(void) } // Send a buffer to the USB IN FIFO. -// When the macro USBD_USE_STREAMS is defined this will stream a buffer of data +// When the macro USBD_USE_STREAMS is defined this will stream a buffer of data // to the FIFO using the most efficient MCU streamout combination. -// If streaming is disabled then it will send each byte of the buffer in turn +// If streaming is disabled then it will send each byte of the buffer in turn // to the FIFO. The is no reason to not stream. // The total number of bytes sent to the FIFO is returned. static uint16_t _ft9xx_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_t length) { uint16_t bytes_read = 0; uint16_t buff_size = length; - + #ifdef USBD_USE_STREAMS volatile uint8_t *data_reg; @@ -423,7 +423,7 @@ static uint16_t _ft9xx_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_ bytes_read = buff_size; } #else // USBD_USE_STREAMS - + bytes_read = buff_size; while (buff_size--) { @@ -438,7 +438,7 @@ static uint16_t _ft9xx_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_ // Receive a buffer from the USB OUT FIFO. // When the macro USBD_USE_STREAMS is defined this will stream from the FIFO // to a buffer of data using the most efficient MCU streamin combination. -// If streaming is disabled then it will receive each byte from the FIFO in turn +// If streaming is disabled then it will receive each byte from the FIFO in turn // to the buffer. The is no reason to not stream. // The total number of bytes received from the FIFO is returned. static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t length) @@ -448,7 +448,7 @@ static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t len #endif // USBD_USE_STREAMS uint16_t bytes_read = 0; uint16_t buff_size = length; - + if (length > 0) { if (ep_number == USBD_EP_0) @@ -596,7 +596,7 @@ void dcd_remote_wakeup(uint8_t rhport) SYS->MSC0CFG = SYS->MSC0CFG | MASK_SYS_MSC0CFG_DEV_RMWAKEUP; // At least 2 ms of delay needed for RESUME Data K state. - delayms(2); + delayms(2); SYS->MSC0CFG &= ~MASK_SYS_MSC0CFG_DEV_RMWAKEUP; @@ -621,7 +621,7 @@ void dcd_connect(uint8_t rhport) // Determine bus speed and signal speed to tusb. _ft9xx_usb_speed(); } - + // Setup the control endpoint only. #if CFG_TUD_ENDPOINT0_SIZE == 64 USBD_EP_CR_REG(USBD_EP_0) = (USBD_EP0_MAX_SIZE_64 << BIT_USBD_EP0_MAX_SIZE); @@ -702,7 +702,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) TU_LOG1("FT9xx endpoint size not valid: requested %d max 1024\r\n", ep_size); return false; } - // Calculate actual amount of buffer RAM used by this endpoint. This may be more than the + // Calculate actual amount of buffer RAM used by this endpoint. This may be more than the // requested size. ep_buff_size = 8 << ep_reg_size; @@ -714,7 +714,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) if (ep_xfer[ep_number].type != USBD_EP_TYPE_DISABLED) { // This could be because an endpoint has been assigned with the same number. - // On FT9xx, IN and OUT endpoints may not have the same number. e.g. There + // On FT9xx, IN and OUT endpoints may not have the same number. e.g. There // cannot been an 0x81 and 0x01 endpoint. TU_LOG1("FT9xx endpoint %d already assigned\r\n", ep_number); return false; @@ -723,7 +723,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) // Check that there is enough buffer RAM to allocate to this new endpoint. // Available buffer RAM depends on the device revision. // The IN and OUT buffer RAM should be the same size. - if (ep_dir == USBD_DIR_IN) + if (ep_dir == USBD_DIR_IN) total_ram = USBD_RAMTOTAL_IN; else total_ram = USBD_RAMTOTAL_OUT; @@ -753,7 +753,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) if (total_ram < ep_buff_size) { TU_LOG1("FT9xx insufficient buffer RAM for endpoint %d\r\n", ep_number); - return false; + return false; } // Set the type of this endpoint in the control register. @@ -827,7 +827,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to ep_xfer[ep_number].total_size = total_bytes; ep_xfer[ep_number].remain_size = total_bytes; ep_xfer[ep_number].buff_ptr = buffer; - + if (ep_number == USBD_EP_0) { ep_xfer[USBD_EP_0].dir = ep_dir; @@ -876,7 +876,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to // then report the transfer complete with dcd_event_xfer_complete. ep_xfer[ep_number].valid = 1; } - } + } status = true; } else @@ -922,7 +922,7 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) CRITICAL_SECTION_END } -// Clear stall (non-control endpoint), data toggle is also reset to DATA0 +// Clear stall (non-control endpoint), data toggle is also reset to DATA0 void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { uint8_t ep_number = tu_edpt_number(ep_addr); @@ -1025,7 +1025,7 @@ void dcd_int_handler(uint8_t rhport) // Host has sent a SETUP packet. Receive this into the SETUP packet store. _ft9xx_dusb_out(USBD_EP_0, (uint8_t *)_ft9xx_setup_packet, sizeof(USB_device_request)); - + // Send the packet to tinyusb. dcd_event_setup_received(BOARD_TUD_RHPORT, _ft9xx_setup_packet, true); @@ -1046,13 +1046,13 @@ void dcd_int_handler(uint8_t rhport) { xfer_bytes = (uint16_t)ep_xfer[USBD_EP_0].total_size; - // Transfer incoming data from an OUT packet to the buffer supplied. + // Transfer incoming data from an OUT packet to the buffer supplied. if (ep_xfer[USBD_EP_0].dir == TUSB_DIR_OUT) { xfer_bytes = _ft9xx_edpt_xfer_out(USBD_EP_0, ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes); } // Now signal completion of data packet. - dcd_event_xfer_complete(BOARD_TUD_RHPORT, USBD_EP_0 | (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), + dcd_event_xfer_complete(BOARD_TUD_RHPORT, USBD_EP_0 | (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true); // Incoming FIFO has been cleared. @@ -1097,13 +1097,13 @@ void dcd_int_handler(uint8_t rhport) // Start or continue an OUT transfer. if (ep_xfer[ep_number].dir == TUSB_DIR_OUT) { - xfer_bytes = _ft9xx_edpt_xfer_out(ep_number, - ep_xfer[ep_number].buff_ptr, + xfer_bytes = _ft9xx_edpt_xfer_out(ep_number, + ep_xfer[ep_number].buff_ptr, (uint16_t)ep_xfer[ep_number].remain_size); // Report each OUT packet received to the stack. - dcd_event_xfer_complete(BOARD_TUD_RHPORT, - ep_number /* | TUSB_DIR_OUT_MASK */, + dcd_event_xfer_complete(BOARD_TUD_RHPORT, + ep_number /* | TUSB_DIR_OUT_MASK */, xfer_bytes, XFER_RESULT_SUCCESS, true); ep_xfer[ep_number].buff_ptr += xfer_bytes; @@ -1114,8 +1114,8 @@ void dcd_int_handler(uint8_t rhport) { if (ep_xfer[ep_number].remain_size > 0) { - xfer_bytes = _ft9xx_edpt_xfer_in(ep_number, - ep_xfer[ep_number].buff_ptr, + xfer_bytes = _ft9xx_edpt_xfer_in(ep_number, + ep_xfer[ep_number].buff_ptr, (uint16_t)ep_xfer[ep_number].remain_size); ep_xfer[ep_number].buff_ptr += xfer_bytes; @@ -1124,8 +1124,8 @@ void dcd_int_handler(uint8_t rhport) if (ep_xfer[ep_number].remain_size == 0) { - dcd_event_xfer_complete(BOARD_TUD_RHPORT, - ep_number | TUSB_DIR_IN_MASK, + dcd_event_xfer_complete(BOARD_TUD_RHPORT, + ep_number | TUSB_DIR_IN_MASK, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true); } } @@ -1151,7 +1151,7 @@ void dcd_int_handler(uint8_t rhport) // once the transfer is initiated. // Strictly this should not happen for a non-control endpoint. Interrupts // are disabled when there are no transfers setup for an endpoint. - ep_xfer[ep_number].ready = 1; + ep_xfer[ep_number].ready = 1; } } } @@ -1159,13 +1159,13 @@ void dcd_int_handler(uint8_t rhport) } } -// Power management interrupt handler. +// Power management interrupt handler. // This handles USB device related power management interrupts only. void ft9xx_usbd_pm_ISR(void) { uint16_t pmcfg = SYS->PMCFG_H; - // Main interrupt handler is responible for + // Main interrupt handler is responible for if (pmcfg & MASK_SYS_PMCFG_DEV_CONN_DEV) { // Signal connection interrupt diff --git a/src/portable/chipidea/ci_hs/ci_hs_type.h b/src/portable/chipidea/ci_hs/ci_hs_type.h index 728a86b86..31b5a012d 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_type.h +++ b/src/portable/chipidea/ci_hs/ci_hs_type.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 5bccf81a7..bc6736cf2 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -545,7 +545,7 @@ static void process_edpt_complete_isr(uint8_t rhport, uint8_t epnum, uint8_t dir tu_fifo_advance_write_pointer(p_qhd->ff, xferred_bytes); } } - + // only number of bytes in the IOC qtd dcd_event_xfer_complete(rhport, tu_edpt_addr(epnum, dir), xferred_bytes, result, true); } diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index d0396daea..d607627b4 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 7140897a1..ee9dfb11f 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -566,7 +566,7 @@ static void period_list_xfer_complete_isr(uint8_t hostid, uint32_t interval_ms) case EHCI_QTYPE_ITD: // TODO support hs/fs ISO case EHCI_QTYPE_SITD: case EHCI_QTYPE_FSTN: - + default: break; } @@ -683,7 +683,7 @@ void hcd_int_handler(uint8_t rhport) uint32_t int_status = regs->status; int_status &= regs->inten; - + regs->status = int_status; // Acknowledge handled interrupt if (int_status == 0) return; diff --git a/src/portable/espressif/esp32sx/dcd_esp32sx.c b/src/portable/espressif/esp32sx/dcd_esp32sx.c index 41240f737..1fcfb6241 100644 --- a/src/portable/espressif/esp32sx/dcd_esp32sx.c +++ b/src/portable/espressif/esp32sx/dcd_esp32sx.c @@ -874,4 +874,3 @@ void dcd_int_disable (uint8_t rhport) } #endif // #if OPT_MCU_ESP32S2 || OPT_MCU_ESP32S3 - diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index 0ba53d4d0..487761847 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Koji KITAYAMA @@ -572,7 +572,7 @@ static void process_bus_reset(uint8_t rhport) _dcd.pipe0.buf = NULL; USB0->TXIE = 1; /* Enable only EP0 */ - USB0->RXIE = 0; + USB0->RXIE = 0; /* Clear FIFO settings */ for (unsigned i = 1; i < TUP_DCD_ENDPOINT_MAX; ++i) { @@ -722,7 +722,7 @@ void dcd_edpt_close_all(uint8_t rhport) unsigned const ie = NVIC_GetEnableIRQ(USB0_IRQn); NVIC_DisableIRQ(USB0_IRQn); USB0->TXIE = 1; /* Enable only EP0 */ - USB0->RXIE = 0; + USB0->RXIE = 0; for (unsigned i = 1; i < TUP_DCD_ENDPOINT_MAX; ++i) { regs->TXMAXP = 0; regs->TXCSRH = 0; @@ -854,7 +854,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) if (tu_edpt_dir(ep_addr)) { /* IN */ regs->TXCSRL = USB_TXCSRL1_CLRDT; } else { /* OUT */ - regs->RXCSRL = USB_RXCSRL1_CLRDT; + regs->RXCSRL = USB_RXCSRL1_CLRDT; } if (ie) NVIC_EnableIRQ(USB0_IRQn); } diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 85e18e3aa..9eb2e005e 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Koji KITAYAMA @@ -588,7 +588,7 @@ void hcd_int_disable(uint8_t rhport) uint32_t hcd_frame_number(uint8_t rhport) { (void)rhport; - /* The device must be reset at least once after connection + /* The device must be reset at least once after connection * in order to start the frame counter. */ if (_hcd.need_reset) hcd_port_reset(rhport); return USB0->FRAME; diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 6cf0e6285..6986c8317 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Koji Kitayama @@ -486,7 +486,7 @@ void dcd_init(uint8_t rhport) #else U1PWRCbits.USBPWR = 1; #endif - + #if TU_PIC_INT_SIZE == 4 uint32_t bdt_phys = KVA_TO_PA((uintptr_t)_dcd.bdt); diff --git a/src/portable/microchip/pic32mz/usbhs_registers.h b/src/portable/microchip/pic32mz/usbhs_registers.h index 93b552322..03fe78bbd 100644 --- a/src/portable/microchip/pic32mz/usbhs_registers.h +++ b/src/portable/microchip/pic32mz/usbhs_registers.h @@ -21,7 +21,7 @@ * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE. *******************************************************************************/ /******************************************************************************* - USBHS Peripheral Library Register Definitions + USBHS Peripheral Library Register Definitions File Name: usbhs_registers.h @@ -50,16 +50,16 @@ #define USBHS_REG_INTRRX 0x004 #define USBHS_REG_INTRTXE 0x006 #define USBHS_REG_INTRRXE 0x008 -#define USBHS_REG_INTRUSB 0x00A -#define USBHS_REG_INTRUSBE 0x00B +#define USBHS_REG_INTRUSB 0x00A +#define USBHS_REG_INTRUSBE 0x00B #define USBHS_REG_FRAME 0x00C #define USBHS_REG_INDEX 0x00E #define USBHS_REG_TESTMODE 0x00F /******************************************************* - * Endpoint Control Status Registers (CSR). These values + * Endpoint Control Status Registers (CSR). These values * should be added to either the 0x10 to access the - * register through Indexed CSR. To access the actual + * register through Indexed CSR. To access the actual * CSR, see ahead in this header file. ******************************************************/ @@ -99,20 +99,20 @@ #define USBHS_EP_DEVICE_RX_SEND_STALL 0x20 /* FADDR - Device Function Address */ -typedef union +typedef union { - struct __attribute__((packed)) + struct __attribute__((packed)) { unsigned FUNC:7; unsigned :1; }; - uint8_t w; + uint8_t w; } __USBHS_FADDR_t; /* POWER - Control Resume and Suspend signalling */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -126,14 +126,14 @@ typedef union unsigned ISOUPD:1; }; struct - { + { uint8_t w; }; } __USBHS_POWER_t; /* INTRTXE - Transmit endpoint interrupt enable */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -155,7 +155,7 @@ typedef union } __USBHS_INTRTXE_t; /* INTRRXE - Receive endpoint interrupt enable */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -198,7 +198,7 @@ typedef union } __USBHS_INTRUSBE_t; /* FRAME - Frame number */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -213,7 +213,7 @@ typedef union } __USBHS_FRAME_t; /* INDEX - Endpoint index */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -228,7 +228,7 @@ typedef union } __USBHS_INDEX_t; /* TESTMODE - Test mode register */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -248,7 +248,7 @@ typedef union } __USBHS_TESTMODE_t; -/* COUNT0 - Indicates the amount of data received in endpoint 0 */ +/* COUNT0 - Indicates the amount of data received in endpoint 0 */ typedef union { struct __attribute__((packed)) @@ -627,7 +627,7 @@ typedef union }; uint16_t w; -} __USBHS_TXMAXP_t; +} __USBHS_TXMAXP_t; /* TXFIFOSZ - Size of the transmit endpoint FIFO */ typedef struct __attribute__((packed)) @@ -781,7 +781,7 @@ typedef union } __USBHS_DMACNTL_t; -/* Endpoint Control and Status Register Set */ +/* Endpoint Control and Status Register Set */ typedef struct __attribute__((packed)) { volatile __USBHS_TXMAXP_t TXMAXPbits; @@ -906,7 +906,7 @@ typedef struct __attribute__((aligned(4),packed)) volatile __USBHS_TXFIFOADD_t TXFIFOADDbits; volatile __USBHS_RXFIFOADD_t RXFIFOADDbits; - + volatile uint32_t VCONTROL; volatile uint16_t HWVERS; volatile uint8_t padding1[10]; @@ -923,7 +923,7 @@ typedef struct __attribute__((aligned(4),packed)) volatile __USBHS_TARGET_ADDR_t TADDR[16]; volatile __USBHS_EPCSR_t EPCSR[16]; volatile uint32_t DMA_INTR; - volatile __USBHS_DMA_CHANNEL_t DMA_CHANNEL[8]; + volatile __USBHS_DMA_CHANNEL_t DMA_CHANNEL[8]; volatile uint32_t RQPKTXOUNT[16]; } usbhs_registers_t; diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c index 814e680fb..e3fa51e31 100644 --- a/src/portable/microchip/samg/dcd_samg.c +++ b/src/portable/microchip/samg/dcd_samg.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/src/portable/microchip/samx7x/common_usb_regs.h b/src/portable/microchip/samx7x/common_usb_regs.h index d232f0bcb..db4a81e0e 100644 --- a/src/portable/microchip/samx7x/common_usb_regs.h +++ b/src/portable/microchip/samx7x/common_usb_regs.h @@ -2007,7 +2007,7 @@ /** \brief DEVDMA hardware registers */ typedef struct -{ +{ __IO uint32_t DEVDMANXTDSC; /**< (DEVDMA Offset: 0x00) Device DMA Channel Next Descriptor Address Register */ __IO uint32_t DEVDMAADDRESS; /**< (DEVDMA Offset: 0x04) Device DMA Channel Address Register */ __IO uint32_t DEVDMACONTROL; /**< (DEVDMA Offset: 0x08) Device DMA Channel Control Register */ @@ -2016,7 +2016,7 @@ typedef struct /** \brief HSTDMA hardware registers */ typedef struct -{ +{ __IO uint32_t HSTDMANXTDSC; /**< (HSTDMA Offset: 0x00) Host DMA Channel Next Descriptor Address Register */ __IO uint32_t HSTDMAADDRESS; /**< (HSTDMA Offset: 0x04) Host DMA Channel Address Register */ __IO uint32_t HSTDMACONTROL; /**< (HSTDMA Offset: 0x08) Host DMA Channel Control Register */ @@ -2025,7 +2025,7 @@ typedef struct /** \brief USBHS hardware registers */ typedef struct -{ +{ __IO uint32_t DEVCTRL; /**< (USBHS Offset: 0x00) Device General Control Register */ __I uint32_t DEVISR; /**< (USBHS Offset: 0x04) Device Global Interrupt Status Register */ __O uint32_t DEVICR; /**< (USBHS Offset: 0x08) Device Global Interrupt Clear Register */ diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 24657872b..2bbb345d6 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -241,7 +241,7 @@ static void dcd_ep_handler(uint8_t ep_ix) if (int_status & DEVEPTISR_RXOUTI) { uint8_t *ptr = EP_GET_FIFO_PTR(0,8); - + if (count && xfer->total_len) { uint16_t remain = xfer->total_len - xfer->queued_len; @@ -252,7 +252,7 @@ static void dcd_ep_handler(uint8_t ep_ix) if (xfer->buffer) { memcpy(xfer->buffer + xfer->queued_len, ptr, count); - } else + } else { tu_fifo_write_n(xfer->fifo, ptr, count); } @@ -281,7 +281,7 @@ static void dcd_ep_handler(uint8_t ep_ix) { // TX not complete dcd_transmit_packet(xfer, 0); - } else + } else { // TX complete dcd_event_xfer_complete(0, 0x80 + 0, xfer->total_len, XFER_RESULT_SUCCESS, true); @@ -292,7 +292,7 @@ static void dcd_ep_handler(uint8_t ep_ix) } } } - } else + } else { if (int_status & DEVEPTISR_RXOUTI) { @@ -333,7 +333,7 @@ static void dcd_ep_handler(uint8_t ep_ix) { // TX not complete dcd_transmit_packet(xfer, ep_ix); - } else + } else { // TX complete dcd_event_xfer_complete(0, 0x80 + ep_ix, xfer->total_len, XFER_RESULT_SUCCESS, true); @@ -359,7 +359,7 @@ static void dcd_dma_handler(uint8_t ep_ix) if(USB_REG->DEVEPTCFG[ep_ix] & DEVEPTCFG_EPDIR) { dcd_event_xfer_complete(0, 0x80 + ep_ix, count, XFER_RESULT_SUCCESS, true); - } else + } else { dcd_event_xfer_complete(0, ep_ix, count, XFER_RESULT_SUCCESS, true); } @@ -507,12 +507,12 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) // Enable Endpoint 0 Interrupts USB_REG->DEVIER = DEVIER_PEP_0; return true; - } else + } else { // Endpoint configuration is not successful return false; } - } else + } else { // Enable the endpoint USB_REG->DEVEPT |= ((0x01 << epnum) << DEVEPT_EPEN0_Pos); @@ -544,7 +544,7 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) { USB_REG->DEVIER = ((0x01 << epnum) << DEVIER_PEP_0_Pos); return true; - } else + } else { // Endpoint configuration is not successful return false; @@ -583,7 +583,7 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix) { memcpy(ptr, xfer->buffer + xfer->queued_len, len); } - else + else { tu_fifo_read_n(xfer->fifo, ptr, len); } @@ -595,7 +595,7 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix) { // Control endpoint: clear the interrupt flag to send the data USB_REG->DEVEPTICR[0] = DEVEPTICR_TXINIC; - } else + } else { // Other endpoint types: clear the FIFO control flag to send the data USB_REG->DEVEPTIDR[ep_ix] = DEVEPTIDR_FIFOCONC; @@ -616,7 +616,7 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t xfer->total_len = total_bytes; xfer->queued_len = 0; xfer->fifo = NULL; - + if (EP_DMA_SUPPORT(epnum) && total_bytes != 0) { // Force the CPU to flush the buffer. We increase the size by 32 because the call aligns the @@ -648,12 +648,12 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // and the DMA transfer must be not started. // It is the end of transfer return false; - } else + } else { if (dir == TUSB_DIR_OUT) { USB_REG->DEVEPTIER[epnum] = DEVEPTIER_RXOUTES; - } else + } else { dcd_transmit_packet(xfer,epnum); } @@ -701,20 +701,20 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 // Clean invalidate cache of linear part CleanInValidateCache((uint32_t*) tu_align((uint32_t) info.ptr_lin, 4), info.len_lin + 31); - + USB_REG->DEVDMA[epnum - 1].DEVDMAADDRESS = (uint32_t)info.ptr_lin; if (info.len_wrap) { // Clean invalidate cache of wrapped part CleanInValidateCache((uint32_t*) tu_align((uint32_t) info.ptr_wrap, 4), info.len_wrap + 31); - + dma_desc[epnum - 1].next_desc = 0; dma_desc[epnum - 1].buff_addr = (uint32_t)info.ptr_wrap; dma_desc[epnum - 1].chnl_ctrl = udd_dma_ctrl_wrap | (info.len_wrap << DEVDMACONTROL_BUFF_LENGTH_Pos); // Clean cache of wrapped DMA descriptor CleanInValidateCache((uint32_t*)&dma_desc[epnum - 1], sizeof(dma_desc_t)); - + udd_dma_ctrl_lin |= DEVDMASTATUS_DESC_LDST; USB_REG->DEVDMA[epnum - 1].DEVDMANXTDSC = (uint32_t)&dma_desc[epnum - 1]; } else { @@ -743,7 +743,7 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 if (dir == TUSB_DIR_OUT) { USB_REG->DEVEPTIER[epnum] = DEVEPTIER_RXOUTES; - } else + } else { dcd_transmit_packet(xfer,epnum); } diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 4aeb85fc0..eee5686f4 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/nuvoton/nuc120/dcd_nuc120.c b/src/portable/nuvoton/nuc120/dcd_nuc120.c index 2fdc05f36..fb12122e0 100644 --- a/src/portable/nuvoton/nuc120/dcd_nuc120.c +++ b/src/portable/nuvoton/nuc120/dcd_nuc120.c @@ -27,9 +27,9 @@ /* Theory of operation: - The NUC100/NUC120 USBD peripheral has six "EP"s, but each is simplex, - so two collectively (peripheral nomenclature of "EP0" and "EP1") are needed to - implement USB EP0. PERIPH_EP0 and PERIPH_EP1 are used by this driver for + The NUC100/NUC120 USBD peripheral has six "EP"s, but each is simplex, + so two collectively (peripheral nomenclature of "EP0" and "EP1") are needed to + implement USB EP0. PERIPH_EP0 and PERIPH_EP1 are used by this driver for EP0_IN and EP0_OUT respectively. This leaves up to four for user usage. */ diff --git a/src/portable/nuvoton/nuc121/dcd_nuc121.c b/src/portable/nuvoton/nuc121/dcd_nuc121.c index a56b5f8e8..873b1b7ef 100644 --- a/src/portable/nuvoton/nuc121/dcd_nuc121.c +++ b/src/portable/nuvoton/nuc121/dcd_nuc121.c @@ -27,9 +27,9 @@ /* Theory of operation: - The NUC121/NUC125/NUC126 USBD peripheral has eight "EP"s, but each is simplex, - so two collectively (peripheral nomenclature of "EP0" and "EP1") are needed to - implement USB EP0. PERIPH_EP0 and PERIPH_EP1 are used by this driver for + The NUC121/NUC125/NUC126 USBD peripheral has eight "EP"s, but each is simplex, + so two collectively (peripheral nomenclature of "EP0" and "EP1") are needed to + implement USB EP0. PERIPH_EP0 and PERIPH_EP1 are used by this driver for EP0_IN and EP0_OUT respectively. This leaves up to six for user usage. */ diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c index 3fa7c1ec1..3a92c9794 100644 --- a/src/portable/nuvoton/nuc505/dcd_nuc505.c +++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c @@ -27,9 +27,9 @@ /* Theory of operation: - The NUC505 USBD peripheral has twelve "EP"s, where each is simplex, in addition + The NUC505 USBD peripheral has twelve "EP"s, where each is simplex, in addition to dedicated support for the control endpoint (EP0). The non-user endpoints - are referred to as "user" EPs in this code, and follow the datasheet + are referred to as "user" EPs in this code, and follow the datasheet nomenclature of EPA through EPL. */ @@ -389,7 +389,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to while (total_bytes < USBD->CEPRXCNT); for (int count = 0; count < total_bytes; count++) *buffer++ = USBD->CEPDAT_BYTE; - + dcd_event_xfer_complete(0, ep_addr, total_bytes, XFER_RESULT_SUCCESS, true); } } diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 13eb105cd..b6daec3de 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Koji Kitayama @@ -296,7 +296,7 @@ void dcd_int_disable(uint8_t rhport) void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { - _dcd.addr = dev_addr & 0x7F; + _dcd.addr = dev_addr & 0x7F; /* Response with status first before changing device address */ dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); } @@ -528,7 +528,7 @@ void dcd_int_handler(uint8_t rhport) if (is & USB_ISTAT_SLEEP_MASK) { // TU_LOG2("Suspend: "); TU_LOG2_HEX(is); - // Note Host usually has extra delay after bus reset (without SOF), which could falsely + // Note Host usually has extra delay after bus reset (without SOF), which could falsely // detected as Sleep event. Though usbd has debouncing logic so we are good KHCI->ISTAT = USB_ISTAT_SLEEP_MASK; process_bus_sleep(rhport); diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 0f5fa6275..35763f121 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Koji Kitayama @@ -414,7 +414,7 @@ void hcd_int_disable(uint8_t rhport) uint32_t hcd_frame_number(uint8_t rhport) { (void)rhport; - /* The device must be reset at least once after connection + /* The device must be reset at least once after connection * in order to start the frame counter. */ if (_hcd.need_reset) hcd_port_reset(rhport); uint32_t frmnum = KHCI->FRMNUML; diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index 0894a5eeb..86149afd8 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.h b/src/portable/nxp/lpc17_40/dcd_lpc17_40.h index 07daa32e4..654b80866 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.h +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c b/src/portable/nxp/lpc17_40/hcd_lpc17_40.c index ad9ed59b4..372dcf51f 100644 --- a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/hcd_lpc17_40.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) @@ -44,4 +44,3 @@ void hcd_int_disable(uint8_t rhport) } #endif - diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 124656307..5368ef868 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -373,7 +373,7 @@ void dcd_edpt_close_all (uint8_t rhport) void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { (void) rhport; - + uint8_t ep_id = ep_addr2id(ep_addr); _dcd.ep[ep_id][0].cmd_sts.active = _dcd.ep[ep_id][0].cmd_sts.active = 0; // TODO proper way is to EPSKIP then wait ep[][].active then write ep[][].disable (see table 778 in LPC55S69 Use Manual) _dcd.ep[ep_id][0].cmd_sts.disable = _dcd.ep[ep_id][1].cmd_sts.disable = 1; @@ -426,7 +426,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to static void bus_reset(uint8_t rhport) { tu_memclr(&_dcd, sizeof(dcd_data_t)); - edpt_reset_all(rhport); + edpt_reset_all(rhport); // disable all endpoints as specified by LPC55S69 UM Table 778 for(uint8_t ep_id = 0; ep_id < 2*MAX_EP_PAIRS; ep_id++) @@ -575,4 +575,3 @@ void dcd_int_handler(uint8_t rhport) } #endif - diff --git a/src/portable/nxp/transdimension/common_transdimension.h b/src/portable/nxp/transdimension/common_transdimension.h index 69074de41..95ae1903e 100644 --- a/src/portable/nxp/transdimension/common_transdimension.h +++ b/src/portable/nxp/transdimension/common_transdimension.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/src/portable/nxp/transdimension/dcd_transdimension.c b/src/portable/nxp/transdimension/dcd_transdimension.c index 1f27a6872..983d7cfcf 100644 --- a/src/portable/nxp/transdimension/dcd_transdimension.c +++ b/src/portable/nxp/transdimension/dcd_transdimension.c @@ -569,7 +569,7 @@ static void process_edpt_complete_isr(uint8_t rhport, uint8_t epnum, uint8_t dir tu_fifo_advance_write_pointer(p_qhd->ff, xferred_bytes); } } - + // only number of bytes in the IOC qtd dcd_event_xfer_complete(rhport, tu_edpt_addr(epnum, dir), xferred_bytes, result, true); } diff --git a/src/portable/nxp/transdimension/hcd_transdimension.c b/src/portable/nxp/transdimension/hcd_transdimension.c index 392764ff6..0b3e9e4ef 100644 --- a/src/portable/nxp/transdimension/hcd_transdimension.c +++ b/src/portable/nxp/transdimension/hcd_transdimension.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index b615743b8..260804d3d 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -715,4 +715,3 @@ void hcd_int_handler(uint8_t hostid) #endif - diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c index 1bc5594d8..e6daf6827 100644 --- a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h index a06407f23..9f8e58d42 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.h +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h @@ -47,7 +47,7 @@ typedef struct hw_endpoint { // Is this a valid struct bool configured; - + // Transfer direction (i.e. IN is rx for host but tx for device) // allows us to common up transfer functions bool rx; diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index e49c0b52e..1677cfa12 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Nathan Conrad @@ -181,7 +181,7 @@ static void dcd_handle_bus_reset(void); static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix); static void dcd_ep_ctr_handler(void); -// PMA allocation/access +// PMA allocation/access static uint8_t open_ep_count; static uint16_t ep_buf_ptr; ///< Points to first free memory location static void dcd_pma_alloc_reset(void); @@ -249,7 +249,7 @@ void dcd_init (uint8_t rhport) asm("NOP"); } USB->CNTR = 0; // Enable USB - + USB->BTABLE = DCD_STM32_BTABLE_BASE; USB->ISTR = 0; // Clear pending interrupts @@ -263,7 +263,7 @@ void dcd_init (uint8_t rhport) USB->CNTR |= USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; dcd_handle_bus_reset(); - + // Enable pull-up if supported if ( dcd_connect ) dcd_connect(rhport); } @@ -464,12 +464,12 @@ static void dcd_handle_bus_reset(void) //__IO uint16_t * const epreg = &(EPREG(0)); USB->DADDR = 0u; // disable USB peripheral by clearing the EF flag - + for(uint32_t i=0; iep_idx = ep_idx; pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); - + *pcd_ep_tx_address_ptr(USB, ep_idx) = pma_addr; *pcd_ep_rx_address_ptr(USB, ep_idx) = pma_addr; - + return true; } @@ -1035,7 +1035,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpo { pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); } - + pcd_set_ep_address(USB, ep_idx, tu_edpt_number(p_endpoint_desc->bEndpointAddress)); // Be normal, for now, instead of only accepting zero-byte packets (on control endpoint) // or being double-buffered (bulk endpoints) @@ -1250,11 +1250,11 @@ static bool dcd_write_packet_memory_ff(tu_fifo_t * ff, uint16_t dst, uint16_t wN { // Since we copy from a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies tu_fifo_buffer_info_t info; - tu_fifo_get_read_info(ff, &info); - + tu_fifo_get_read_info(ff, &info); + uint16_t cnt_lin = TU_MIN(wNBytes, info.len_lin); uint16_t cnt_wrap = TU_MIN(wNBytes - cnt_lin, info.len_wrap); - + // We want to read from the FIFO and write it into the PMA, if LIN part is ODD and has WRAPPED part, // last lin byte will be combined with wrapped part // To ensure PMA is always access 16bit aligned (dst aligned to 16 bit) @@ -1352,7 +1352,7 @@ static bool dcd_read_packet_memory_ff(tu_fifo_t * ff, uint16_t src, uint16_t wNB // Copy last linear byte & first wrapped byte uint16_t tmp; dcd_read_packet_memory(&tmp, src, 2); - + ((uint8_t*)info.ptr_lin)[cnt_lin - 1] = (uint8_t)tmp; ((uint8_t*)info.ptr_wrap)[0] = (uint8_t)(tmp >> 8U); src += 2; @@ -1379,4 +1379,3 @@ static bool dcd_read_packet_memory_ff(tu_fifo_t * ff, uint16_t src, uint16_t wNB } #endif - diff --git a/src/portable/st/synopsys/synopsys_common.h b/src/portable/st/synopsys/synopsys_common.h index 6f0602fe9..ce3195b23 100644 --- a/src/portable/st/synopsys/synopsys_common.h +++ b/src/portable/st/synopsys/synopsys_common.h @@ -2,15 +2,15 @@ ****************************************************************************** * @file synopsys_common.h * @author MCD Application Team - * @brief CMSIS Cortex-M3 Device USB OTG peripheral Header File. - * This file contains the USB OTG peripheral register's definitions, bits + * @brief CMSIS Cortex-M3 Device USB OTG peripheral Header File. + * This file contains the USB OTG peripheral register's definitions, bits * definitions and memory mapping for STM32F1xx devices. - * + * * This file contains: * - Data structures and the address mapping for the USB OTG peripheral * - The Peripheral's registers declarations and bits definition * - Macros to access the peripheral's registers hardware - * + * ****************************************************************************** * @attention * @@ -40,7 +40,7 @@ #define __OM volatile #define __IOM volatile -/** +/** * @brief __USB_OTG_Core_register */ @@ -66,11 +66,11 @@ typedef struct __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO Address offset: 0x104 */ } USB_OTG_GlobalTypeDef; -/** +/** * @brief __device_Registers */ -typedef struct +typedef struct { __IO uint32_t DCFG; /*!< dev Configuration Register Address offset: 800h*/ __IO uint32_t DCTL; /*!< dev Control Register Address offset: 804h*/ @@ -87,18 +87,18 @@ typedef struct __IO uint32_t DTHRCTL; /*!< dev thr Address offset: 830h*/ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset: 834h*/ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset: 838h*/ - __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset: 83Ch*/ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset: 83Ch*/ uint32_t Reserved40; /*!< dedicated EP mask Address offset: 840h*/ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset: 844h*/ uint32_t Reserved44[15]; /*!< Reserved 844-87Ch*/ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset: 884h*/ } USB_OTG_DeviceTypeDef; -/** +/** * @brief __IN_Endpoint-Specific_Register */ -typedef struct +typedef struct { __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h*/ @@ -110,11 +110,11 @@ typedef struct uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ } USB_OTG_INEndpointTypeDef; -/** +/** * @brief __OUT_Endpoint-Specific_Registers */ -typedef struct +typedef struct { __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h*/ @@ -125,11 +125,11 @@ typedef struct uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ } USB_OTG_OUTEndpointTypeDef; -/** +/** * @brief __Host_Mode_Register_Structures */ -typedef struct +typedef struct { __IO uint32_t HCFG; /*!< Host Configuration Register 400h*/ __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h*/ @@ -140,7 +140,7 @@ typedef struct __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h*/ } USB_OTG_HostTypeDef; -/** +/** * @brief __Host_Channel_Specific_Registers */ @@ -177,60 +177,60 @@ typedef struct /* */ /******************************************************************************/ /******************** Bit definition for USB_OTG_GOTGCTL register ***********/ -#define USB_OTG_GOTGCTL_SRQSCS_Pos (0U) +#define USB_OTG_GOTGCTL_SRQSCS_Pos (0U) #define USB_OTG_GOTGCTL_SRQSCS_Msk (0x1UL << USB_OTG_GOTGCTL_SRQSCS_Pos) /*!< 0x00000001 */ #define USB_OTG_GOTGCTL_SRQSCS USB_OTG_GOTGCTL_SRQSCS_Msk /*!< Session request success */ -#define USB_OTG_GOTGCTL_SRQ_Pos (1U) +#define USB_OTG_GOTGCTL_SRQ_Pos (1U) #define USB_OTG_GOTGCTL_SRQ_Msk (0x1UL << USB_OTG_GOTGCTL_SRQ_Pos) /*!< 0x00000002 */ #define USB_OTG_GOTGCTL_SRQ USB_OTG_GOTGCTL_SRQ_Msk /*!< Session request */ -#define USB_OTG_GOTGCTL_HNGSCS_Pos (8U) +#define USB_OTG_GOTGCTL_HNGSCS_Pos (8U) #define USB_OTG_GOTGCTL_HNGSCS_Msk (0x1UL << USB_OTG_GOTGCTL_HNGSCS_Pos) /*!< 0x00000100 */ #define USB_OTG_GOTGCTL_HNGSCS USB_OTG_GOTGCTL_HNGSCS_Msk /*!< Host set HNP enable */ -#define USB_OTG_GOTGCTL_HNPRQ_Pos (9U) +#define USB_OTG_GOTGCTL_HNPRQ_Pos (9U) #define USB_OTG_GOTGCTL_HNPRQ_Msk (0x1UL << USB_OTG_GOTGCTL_HNPRQ_Pos) /*!< 0x00000200 */ #define USB_OTG_GOTGCTL_HNPRQ USB_OTG_GOTGCTL_HNPRQ_Msk /*!< HNP request */ -#define USB_OTG_GOTGCTL_HSHNPEN_Pos (10U) +#define USB_OTG_GOTGCTL_HSHNPEN_Pos (10U) #define USB_OTG_GOTGCTL_HSHNPEN_Msk (0x1UL << USB_OTG_GOTGCTL_HSHNPEN_Pos) /*!< 0x00000400 */ #define USB_OTG_GOTGCTL_HSHNPEN USB_OTG_GOTGCTL_HSHNPEN_Msk /*!< Host set HNP enable */ -#define USB_OTG_GOTGCTL_DHNPEN_Pos (11U) +#define USB_OTG_GOTGCTL_DHNPEN_Pos (11U) #define USB_OTG_GOTGCTL_DHNPEN_Msk (0x1UL << USB_OTG_GOTGCTL_DHNPEN_Pos) /*!< 0x00000800 */ #define USB_OTG_GOTGCTL_DHNPEN USB_OTG_GOTGCTL_DHNPEN_Msk /*!< Device HNP enabled */ -#define USB_OTG_GOTGCTL_CIDSTS_Pos (16U) +#define USB_OTG_GOTGCTL_CIDSTS_Pos (16U) #define USB_OTG_GOTGCTL_CIDSTS_Msk (0x1UL << USB_OTG_GOTGCTL_CIDSTS_Pos) /*!< 0x00010000 */ #define USB_OTG_GOTGCTL_CIDSTS USB_OTG_GOTGCTL_CIDSTS_Msk /*!< Connector ID status */ -#define USB_OTG_GOTGCTL_DBCT_Pos (17U) +#define USB_OTG_GOTGCTL_DBCT_Pos (17U) #define USB_OTG_GOTGCTL_DBCT_Msk (0x1UL << USB_OTG_GOTGCTL_DBCT_Pos) /*!< 0x00020000 */ #define USB_OTG_GOTGCTL_DBCT USB_OTG_GOTGCTL_DBCT_Msk /*!< Long/short debounce time */ -#define USB_OTG_GOTGCTL_ASVLD_Pos (18U) +#define USB_OTG_GOTGCTL_ASVLD_Pos (18U) #define USB_OTG_GOTGCTL_ASVLD_Msk (0x1UL << USB_OTG_GOTGCTL_ASVLD_Pos) /*!< 0x00040000 */ #define USB_OTG_GOTGCTL_ASVLD USB_OTG_GOTGCTL_ASVLD_Msk /*!< A-session valid */ -#define USB_OTG_GOTGCTL_BSVLD_Pos (19U) +#define USB_OTG_GOTGCTL_BSVLD_Pos (19U) #define USB_OTG_GOTGCTL_BSVLD_Msk (0x1UL << USB_OTG_GOTGCTL_BSVLD_Pos) /*!< 0x00080000 */ #define USB_OTG_GOTGCTL_BSVLD USB_OTG_GOTGCTL_BSVLD_Msk /*!< B-session valid */ /******************** Bit definition for USB_OTG_HCFG register ********************/ -#define USB_OTG_HCFG_FSLSPCS_Pos (0U) +#define USB_OTG_HCFG_FSLSPCS_Pos (0U) #define USB_OTG_HCFG_FSLSPCS_Msk (0x3UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000003 */ #define USB_OTG_HCFG_FSLSPCS USB_OTG_HCFG_FSLSPCS_Msk /*!< FS/LS PHY clock select */ #define USB_OTG_HCFG_FSLSPCS_0 (0x1UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000001 */ #define USB_OTG_HCFG_FSLSPCS_1 (0x2UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000002 */ -#define USB_OTG_HCFG_FSLSS_Pos (2U) +#define USB_OTG_HCFG_FSLSS_Pos (2U) #define USB_OTG_HCFG_FSLSS_Msk (0x1UL << USB_OTG_HCFG_FSLSS_Pos) /*!< 0x00000004 */ #define USB_OTG_HCFG_FSLSS USB_OTG_HCFG_FSLSS_Msk /*!< FS- and LS-only support */ /******************** Bit definition for USB_OTG_DCFG register ********************/ -#define USB_OTG_DCFG_DSPD_Pos (0U) +#define USB_OTG_DCFG_DSPD_Pos (0U) #define USB_OTG_DCFG_DSPD_Msk (0x3UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000003 */ #define USB_OTG_DCFG_DSPD USB_OTG_DCFG_DSPD_Msk /*!< Device speed */ #define USB_OTG_DCFG_DSPD_0 (0x1UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000001 */ #define USB_OTG_DCFG_DSPD_1 (0x2UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000002 */ -#define USB_OTG_DCFG_NZLSOHSK_Pos (2U) +#define USB_OTG_DCFG_NZLSOHSK_Pos (2U) #define USB_OTG_DCFG_NZLSOHSK_Msk (0x1UL << USB_OTG_DCFG_NZLSOHSK_Pos) /*!< 0x00000004 */ #define USB_OTG_DCFG_NZLSOHSK USB_OTG_DCFG_NZLSOHSK_Msk /*!< Nonzero-length status OUT handshake */ -#define USB_OTG_DCFG_DAD_Pos (4U) +#define USB_OTG_DCFG_DAD_Pos (4U) #define USB_OTG_DCFG_DAD_Msk (0x7FUL << USB_OTG_DCFG_DAD_Pos) /*!< 0x000007F0 */ #define USB_OTG_DCFG_DAD USB_OTG_DCFG_DAD_Msk /*!< Device address */ #define USB_OTG_DCFG_DAD_0 (0x01UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000010 */ @@ -241,120 +241,120 @@ typedef struct #define USB_OTG_DCFG_DAD_5 (0x20UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000200 */ #define USB_OTG_DCFG_DAD_6 (0x40UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000400 */ -#define USB_OTG_DCFG_PFIVL_Pos (11U) +#define USB_OTG_DCFG_PFIVL_Pos (11U) #define USB_OTG_DCFG_PFIVL_Msk (0x3UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00001800 */ #define USB_OTG_DCFG_PFIVL USB_OTG_DCFG_PFIVL_Msk /*!< Periodic (micro)frame interval */ #define USB_OTG_DCFG_PFIVL_0 (0x1UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00000800 */ #define USB_OTG_DCFG_PFIVL_1 (0x2UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00001000 */ -#define USB_OTG_DCFG_PERSCHIVL_Pos (24U) +#define USB_OTG_DCFG_PERSCHIVL_Pos (24U) #define USB_OTG_DCFG_PERSCHIVL_Msk (0x3UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x03000000 */ #define USB_OTG_DCFG_PERSCHIVL USB_OTG_DCFG_PERSCHIVL_Msk /*!< Periodic scheduling interval */ #define USB_OTG_DCFG_PERSCHIVL_0 (0x1UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x01000000 */ #define USB_OTG_DCFG_PERSCHIVL_1 (0x2UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x02000000 */ /******************** Bit definition for USB_OTG_PCGCR register ********************/ -#define USB_OTG_PCGCR_STPPCLK_Pos (0U) +#define USB_OTG_PCGCR_STPPCLK_Pos (0U) #define USB_OTG_PCGCR_STPPCLK_Msk (0x1UL << USB_OTG_PCGCR_STPPCLK_Pos) /*!< 0x00000001 */ #define USB_OTG_PCGCR_STPPCLK USB_OTG_PCGCR_STPPCLK_Msk /*!< Stop PHY clock */ -#define USB_OTG_PCGCR_GATEHCLK_Pos (1U) +#define USB_OTG_PCGCR_GATEHCLK_Pos (1U) #define USB_OTG_PCGCR_GATEHCLK_Msk (0x1UL << USB_OTG_PCGCR_GATEHCLK_Pos) /*!< 0x00000002 */ #define USB_OTG_PCGCR_GATEHCLK USB_OTG_PCGCR_GATEHCLK_Msk /*!< Gate HCLK */ -#define USB_OTG_PCGCR_PHYSUSP_Pos (4U) +#define USB_OTG_PCGCR_PHYSUSP_Pos (4U) #define USB_OTG_PCGCR_PHYSUSP_Msk (0x1UL << USB_OTG_PCGCR_PHYSUSP_Pos) /*!< 0x00000010 */ #define USB_OTG_PCGCR_PHYSUSP USB_OTG_PCGCR_PHYSUSP_Msk /*!< PHY suspended */ /******************** Bit definition for USB_OTG_GOTGINT register ********************/ -#define USB_OTG_GOTGINT_SEDET_Pos (2U) +#define USB_OTG_GOTGINT_SEDET_Pos (2U) #define USB_OTG_GOTGINT_SEDET_Msk (0x1UL << USB_OTG_GOTGINT_SEDET_Pos) /*!< 0x00000004 */ #define USB_OTG_GOTGINT_SEDET USB_OTG_GOTGINT_SEDET_Msk /*!< Session end detected */ -#define USB_OTG_GOTGINT_SRSSCHG_Pos (8U) +#define USB_OTG_GOTGINT_SRSSCHG_Pos (8U) #define USB_OTG_GOTGINT_SRSSCHG_Msk (0x1UL << USB_OTG_GOTGINT_SRSSCHG_Pos) /*!< 0x00000100 */ #define USB_OTG_GOTGINT_SRSSCHG USB_OTG_GOTGINT_SRSSCHG_Msk /*!< Session request success status change */ -#define USB_OTG_GOTGINT_HNSSCHG_Pos (9U) +#define USB_OTG_GOTGINT_HNSSCHG_Pos (9U) #define USB_OTG_GOTGINT_HNSSCHG_Msk (0x1UL << USB_OTG_GOTGINT_HNSSCHG_Pos) /*!< 0x00000200 */ #define USB_OTG_GOTGINT_HNSSCHG USB_OTG_GOTGINT_HNSSCHG_Msk /*!< Host negotiation success status change */ -#define USB_OTG_GOTGINT_HNGDET_Pos (17U) +#define USB_OTG_GOTGINT_HNGDET_Pos (17U) #define USB_OTG_GOTGINT_HNGDET_Msk (0x1UL << USB_OTG_GOTGINT_HNGDET_Pos) /*!< 0x00020000 */ #define USB_OTG_GOTGINT_HNGDET USB_OTG_GOTGINT_HNGDET_Msk /*!< Host negotiation detected */ -#define USB_OTG_GOTGINT_ADTOCHG_Pos (18U) +#define USB_OTG_GOTGINT_ADTOCHG_Pos (18U) #define USB_OTG_GOTGINT_ADTOCHG_Msk (0x1UL << USB_OTG_GOTGINT_ADTOCHG_Pos) /*!< 0x00040000 */ #define USB_OTG_GOTGINT_ADTOCHG USB_OTG_GOTGINT_ADTOCHG_Msk /*!< A-device timeout change */ -#define USB_OTG_GOTGINT_DBCDNE_Pos (19U) +#define USB_OTG_GOTGINT_DBCDNE_Pos (19U) #define USB_OTG_GOTGINT_DBCDNE_Msk (0x1UL << USB_OTG_GOTGINT_DBCDNE_Pos) /*!< 0x00080000 */ #define USB_OTG_GOTGINT_DBCDNE USB_OTG_GOTGINT_DBCDNE_Msk /*!< Debounce done */ /******************** Bit definition for USB_OTG_DCTL register ********************/ -#define USB_OTG_DCTL_RWUSIG_Pos (0U) +#define USB_OTG_DCTL_RWUSIG_Pos (0U) #define USB_OTG_DCTL_RWUSIG_Msk (0x1UL << USB_OTG_DCTL_RWUSIG_Pos) /*!< 0x00000001 */ #define USB_OTG_DCTL_RWUSIG USB_OTG_DCTL_RWUSIG_Msk /*!< Remote wakeup signaling */ -#define USB_OTG_DCTL_SDIS_Pos (1U) +#define USB_OTG_DCTL_SDIS_Pos (1U) #define USB_OTG_DCTL_SDIS_Msk (0x1UL << USB_OTG_DCTL_SDIS_Pos) /*!< 0x00000002 */ #define USB_OTG_DCTL_SDIS USB_OTG_DCTL_SDIS_Msk /*!< Soft disconnect */ -#define USB_OTG_DCTL_GINSTS_Pos (2U) +#define USB_OTG_DCTL_GINSTS_Pos (2U) #define USB_OTG_DCTL_GINSTS_Msk (0x1UL << USB_OTG_DCTL_GINSTS_Pos) /*!< 0x00000004 */ #define USB_OTG_DCTL_GINSTS USB_OTG_DCTL_GINSTS_Msk /*!< Global IN NAK status */ -#define USB_OTG_DCTL_GONSTS_Pos (3U) +#define USB_OTG_DCTL_GONSTS_Pos (3U) #define USB_OTG_DCTL_GONSTS_Msk (0x1UL << USB_OTG_DCTL_GONSTS_Pos) /*!< 0x00000008 */ #define USB_OTG_DCTL_GONSTS USB_OTG_DCTL_GONSTS_Msk /*!< Global OUT NAK status */ -#define USB_OTG_DCTL_TCTL_Pos (4U) +#define USB_OTG_DCTL_TCTL_Pos (4U) #define USB_OTG_DCTL_TCTL_Msk (0x7UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000070 */ #define USB_OTG_DCTL_TCTL USB_OTG_DCTL_TCTL_Msk /*!< Test control */ #define USB_OTG_DCTL_TCTL_0 (0x1UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000010 */ #define USB_OTG_DCTL_TCTL_1 (0x2UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000020 */ #define USB_OTG_DCTL_TCTL_2 (0x4UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000040 */ -#define USB_OTG_DCTL_SGINAK_Pos (7U) +#define USB_OTG_DCTL_SGINAK_Pos (7U) #define USB_OTG_DCTL_SGINAK_Msk (0x1UL << USB_OTG_DCTL_SGINAK_Pos) /*!< 0x00000080 */ #define USB_OTG_DCTL_SGINAK USB_OTG_DCTL_SGINAK_Msk /*!< Set global IN NAK */ -#define USB_OTG_DCTL_CGINAK_Pos (8U) +#define USB_OTG_DCTL_CGINAK_Pos (8U) #define USB_OTG_DCTL_CGINAK_Msk (0x1UL << USB_OTG_DCTL_CGINAK_Pos) /*!< 0x00000100 */ #define USB_OTG_DCTL_CGINAK USB_OTG_DCTL_CGINAK_Msk /*!< Clear global IN NAK */ -#define USB_OTG_DCTL_SGONAK_Pos (9U) +#define USB_OTG_DCTL_SGONAK_Pos (9U) #define USB_OTG_DCTL_SGONAK_Msk (0x1UL << USB_OTG_DCTL_SGONAK_Pos) /*!< 0x00000200 */ #define USB_OTG_DCTL_SGONAK USB_OTG_DCTL_SGONAK_Msk /*!< Set global OUT NAK */ -#define USB_OTG_DCTL_CGONAK_Pos (10U) +#define USB_OTG_DCTL_CGONAK_Pos (10U) #define USB_OTG_DCTL_CGONAK_Msk (0x1UL << USB_OTG_DCTL_CGONAK_Pos) /*!< 0x00000400 */ #define USB_OTG_DCTL_CGONAK USB_OTG_DCTL_CGONAK_Msk /*!< Clear global OUT NAK */ -#define USB_OTG_DCTL_POPRGDNE_Pos (11U) +#define USB_OTG_DCTL_POPRGDNE_Pos (11U) #define USB_OTG_DCTL_POPRGDNE_Msk (0x1UL << USB_OTG_DCTL_POPRGDNE_Pos) /*!< 0x00000800 */ #define USB_OTG_DCTL_POPRGDNE USB_OTG_DCTL_POPRGDNE_Msk /*!< Power-on programming done */ /******************** Bit definition for USB_OTG_HFIR register ********************/ -#define USB_OTG_HFIR_FRIVL_Pos (0U) +#define USB_OTG_HFIR_FRIVL_Pos (0U) #define USB_OTG_HFIR_FRIVL_Msk (0xFFFFUL << USB_OTG_HFIR_FRIVL_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HFIR_FRIVL USB_OTG_HFIR_FRIVL_Msk /*!< Frame interval */ /******************** Bit definition for USB_OTG_HFNUM register ********************/ -#define USB_OTG_HFNUM_FRNUM_Pos (0U) +#define USB_OTG_HFNUM_FRNUM_Pos (0U) #define USB_OTG_HFNUM_FRNUM_Msk (0xFFFFUL << USB_OTG_HFNUM_FRNUM_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HFNUM_FRNUM USB_OTG_HFNUM_FRNUM_Msk /*!< Frame number */ -#define USB_OTG_HFNUM_FTREM_Pos (16U) +#define USB_OTG_HFNUM_FTREM_Pos (16U) #define USB_OTG_HFNUM_FTREM_Msk (0xFFFFUL << USB_OTG_HFNUM_FTREM_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_HFNUM_FTREM USB_OTG_HFNUM_FTREM_Msk /*!< Frame time remaining */ /******************** Bit definition for USB_OTG_DSTS register ********************/ -#define USB_OTG_DSTS_SUSPSTS_Pos (0U) +#define USB_OTG_DSTS_SUSPSTS_Pos (0U) #define USB_OTG_DSTS_SUSPSTS_Msk (0x1UL << USB_OTG_DSTS_SUSPSTS_Pos) /*!< 0x00000001 */ #define USB_OTG_DSTS_SUSPSTS USB_OTG_DSTS_SUSPSTS_Msk /*!< Suspend status */ -#define USB_OTG_DSTS_ENUMSPD_Pos (1U) +#define USB_OTG_DSTS_ENUMSPD_Pos (1U) #define USB_OTG_DSTS_ENUMSPD_Msk (0x3UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000006 */ #define USB_OTG_DSTS_ENUMSPD USB_OTG_DSTS_ENUMSPD_Msk /*!< Enumerated speed */ #define USB_OTG_DSTS_ENUMSPD_0 (0x1UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000002 */ #define USB_OTG_DSTS_ENUMSPD_1 (0x2UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000004 */ -#define USB_OTG_DSTS_EERR_Pos (3U) +#define USB_OTG_DSTS_EERR_Pos (3U) #define USB_OTG_DSTS_EERR_Msk (0x1UL << USB_OTG_DSTS_EERR_Pos) /*!< 0x00000008 */ #define USB_OTG_DSTS_EERR USB_OTG_DSTS_EERR_Msk /*!< Erratic error */ -#define USB_OTG_DSTS_FNSOF_Pos (8U) +#define USB_OTG_DSTS_FNSOF_Pos (8U) #define USB_OTG_DSTS_FNSOF_Msk (0x3FFFUL << USB_OTG_DSTS_FNSOF_Pos) /*!< 0x003FFF00 */ #define USB_OTG_DSTS_FNSOF USB_OTG_DSTS_FNSOF_Msk /*!< Frame number of the received SOF */ /******************** Bit definition for USB_OTG_GAHBCFG register ********************/ -#define USB_OTG_GAHBCFG_GINT_Pos (0U) +#define USB_OTG_GAHBCFG_GINT_Pos (0U) #define USB_OTG_GAHBCFG_GINT_Msk (0x1UL << USB_OTG_GAHBCFG_GINT_Pos) /*!< 0x00000001 */ #define USB_OTG_GAHBCFG_GINT USB_OTG_GAHBCFG_GINT_Msk /*!< Global interrupt mask */ -#define USB_OTG_GAHBCFG_HBSTLEN_Pos (1U) +#define USB_OTG_GAHBCFG_HBSTLEN_Pos (1U) #define USB_OTG_GAHBCFG_HBSTLEN_Msk (0xFUL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< 0x0000001E */ #define USB_OTG_GAHBCFG_HBSTLEN USB_OTG_GAHBCFG_HBSTLEN_Msk /*!< Burst length/type */ #define USB_OTG_GAHBCFG_HBSTLEN_0 (0x0UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< Single */ @@ -362,99 +362,99 @@ typedef struct #define USB_OTG_GAHBCFG_HBSTLEN_2 (0x3UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR4 */ #define USB_OTG_GAHBCFG_HBSTLEN_3 (0x5UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR8 */ #define USB_OTG_GAHBCFG_HBSTLEN_4 (0x7UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR16 */ -#define USB_OTG_GAHBCFG_DMAEN_Pos (5U) +#define USB_OTG_GAHBCFG_DMAEN_Pos (5U) #define USB_OTG_GAHBCFG_DMAEN_Msk (0x1UL << USB_OTG_GAHBCFG_DMAEN_Pos) /*!< 0x00000020 */ #define USB_OTG_GAHBCFG_DMAEN USB_OTG_GAHBCFG_DMAEN_Msk /*!< DMA enable */ -#define USB_OTG_GAHBCFG_TXFELVL_Pos (7U) +#define USB_OTG_GAHBCFG_TXFELVL_Pos (7U) #define USB_OTG_GAHBCFG_TXFELVL_Msk (0x1UL << USB_OTG_GAHBCFG_TXFELVL_Pos) /*!< 0x00000080 */ #define USB_OTG_GAHBCFG_TXFELVL USB_OTG_GAHBCFG_TXFELVL_Msk /*!< TxFIFO empty level */ -#define USB_OTG_GAHBCFG_PTXFELVL_Pos (8U) +#define USB_OTG_GAHBCFG_PTXFELVL_Pos (8U) #define USB_OTG_GAHBCFG_PTXFELVL_Msk (0x1UL << USB_OTG_GAHBCFG_PTXFELVL_Pos) /*!< 0x00000100 */ #define USB_OTG_GAHBCFG_PTXFELVL USB_OTG_GAHBCFG_PTXFELVL_Msk /*!< Periodic TxFIFO empty level */ /******************** Bit definition for USB_OTG_GUSBCFG register ********************/ -#define USB_OTG_GUSBCFG_TOCAL_Pos (0U) +#define USB_OTG_GUSBCFG_TOCAL_Pos (0U) #define USB_OTG_GUSBCFG_TOCAL_Msk (0x7UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000007 */ #define USB_OTG_GUSBCFG_TOCAL USB_OTG_GUSBCFG_TOCAL_Msk /*!< FS timeout calibration */ #define USB_OTG_GUSBCFG_TOCAL_0 (0x1UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000001 */ #define USB_OTG_GUSBCFG_TOCAL_1 (0x2UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000002 */ #define USB_OTG_GUSBCFG_TOCAL_2 (0x4UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000004 */ -#define USB_OTG_GUSBCFG_PHYSEL_Pos (6U) +#define USB_OTG_GUSBCFG_PHYSEL_Pos (6U) #define USB_OTG_GUSBCFG_PHYSEL_Msk (0x1UL << USB_OTG_GUSBCFG_PHYSEL_Pos) /*!< 0x00000040 */ #define USB_OTG_GUSBCFG_PHYSEL USB_OTG_GUSBCFG_PHYSEL_Msk /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */ -#define USB_OTG_GUSBCFG_SRPCAP_Pos (8U) +#define USB_OTG_GUSBCFG_SRPCAP_Pos (8U) #define USB_OTG_GUSBCFG_SRPCAP_Msk (0x1UL << USB_OTG_GUSBCFG_SRPCAP_Pos) /*!< 0x00000100 */ #define USB_OTG_GUSBCFG_SRPCAP USB_OTG_GUSBCFG_SRPCAP_Msk /*!< SRP-capable */ -#define USB_OTG_GUSBCFG_HNPCAP_Pos (9U) +#define USB_OTG_GUSBCFG_HNPCAP_Pos (9U) #define USB_OTG_GUSBCFG_HNPCAP_Msk (0x1UL << USB_OTG_GUSBCFG_HNPCAP_Pos) /*!< 0x00000200 */ #define USB_OTG_GUSBCFG_HNPCAP USB_OTG_GUSBCFG_HNPCAP_Msk /*!< HNP-capable */ -#define USB_OTG_GUSBCFG_TRDT_Pos (10U) +#define USB_OTG_GUSBCFG_TRDT_Pos (10U) #define USB_OTG_GUSBCFG_TRDT_Msk (0xFUL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00003C00 */ #define USB_OTG_GUSBCFG_TRDT USB_OTG_GUSBCFG_TRDT_Msk /*!< USB turnaround time */ #define USB_OTG_GUSBCFG_TRDT_0 (0x1UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00000400 */ #define USB_OTG_GUSBCFG_TRDT_1 (0x2UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00000800 */ #define USB_OTG_GUSBCFG_TRDT_2 (0x4UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00001000 */ #define USB_OTG_GUSBCFG_TRDT_3 (0x8UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00002000 */ -#define USB_OTG_GUSBCFG_PHYLPCS_Pos (15U) +#define USB_OTG_GUSBCFG_PHYLPCS_Pos (15U) #define USB_OTG_GUSBCFG_PHYLPCS_Msk (0x1UL << USB_OTG_GUSBCFG_PHYLPCS_Pos) /*!< 0x00008000 */ #define USB_OTG_GUSBCFG_PHYLPCS USB_OTG_GUSBCFG_PHYLPCS_Msk /*!< PHY Low-power clock select */ -#define USB_OTG_GUSBCFG_ULPIFSLS_Pos (17U) +#define USB_OTG_GUSBCFG_ULPIFSLS_Pos (17U) #define USB_OTG_GUSBCFG_ULPIFSLS_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIFSLS_Pos) /*!< 0x00020000 */ #define USB_OTG_GUSBCFG_ULPIFSLS USB_OTG_GUSBCFG_ULPIFSLS_Msk /*!< ULPI FS/LS select */ -#define USB_OTG_GUSBCFG_ULPIAR_Pos (18U) +#define USB_OTG_GUSBCFG_ULPIAR_Pos (18U) #define USB_OTG_GUSBCFG_ULPIAR_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIAR_Pos) /*!< 0x00040000 */ #define USB_OTG_GUSBCFG_ULPIAR USB_OTG_GUSBCFG_ULPIAR_Msk /*!< ULPI Auto-resume */ -#define USB_OTG_GUSBCFG_ULPICSM_Pos (19U) +#define USB_OTG_GUSBCFG_ULPICSM_Pos (19U) #define USB_OTG_GUSBCFG_ULPICSM_Msk (0x1UL << USB_OTG_GUSBCFG_ULPICSM_Pos) /*!< 0x00080000 */ #define USB_OTG_GUSBCFG_ULPICSM USB_OTG_GUSBCFG_ULPICSM_Msk /*!< ULPI Clock SuspendM */ -#define USB_OTG_GUSBCFG_ULPIEVBUSD_Pos (20U) +#define USB_OTG_GUSBCFG_ULPIEVBUSD_Pos (20U) #define USB_OTG_GUSBCFG_ULPIEVBUSD_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIEVBUSD_Pos) /*!< 0x00100000 */ #define USB_OTG_GUSBCFG_ULPIEVBUSD USB_OTG_GUSBCFG_ULPIEVBUSD_Msk /*!< ULPI External VBUS Drive */ -#define USB_OTG_GUSBCFG_ULPIEVBUSI_Pos (21U) +#define USB_OTG_GUSBCFG_ULPIEVBUSI_Pos (21U) #define USB_OTG_GUSBCFG_ULPIEVBUSI_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIEVBUSI_Pos) /*!< 0x00200000 */ #define USB_OTG_GUSBCFG_ULPIEVBUSI USB_OTG_GUSBCFG_ULPIEVBUSI_Msk /*!< ULPI external VBUS indicator */ -#define USB_OTG_GUSBCFG_TSDPS_Pos (22U) +#define USB_OTG_GUSBCFG_TSDPS_Pos (22U) #define USB_OTG_GUSBCFG_TSDPS_Msk (0x1UL << USB_OTG_GUSBCFG_TSDPS_Pos) /*!< 0x00400000 */ #define USB_OTG_GUSBCFG_TSDPS USB_OTG_GUSBCFG_TSDPS_Msk /*!< TermSel DLine pulsing selection */ -#define USB_OTG_GUSBCFG_PCCI_Pos (23U) +#define USB_OTG_GUSBCFG_PCCI_Pos (23U) #define USB_OTG_GUSBCFG_PCCI_Msk (0x1UL << USB_OTG_GUSBCFG_PCCI_Pos) /*!< 0x00800000 */ #define USB_OTG_GUSBCFG_PCCI USB_OTG_GUSBCFG_PCCI_Msk /*!< Indicator complement */ -#define USB_OTG_GUSBCFG_PTCI_Pos (24U) +#define USB_OTG_GUSBCFG_PTCI_Pos (24U) #define USB_OTG_GUSBCFG_PTCI_Msk (0x1UL << USB_OTG_GUSBCFG_PTCI_Pos) /*!< 0x01000000 */ #define USB_OTG_GUSBCFG_PTCI USB_OTG_GUSBCFG_PTCI_Msk /*!< Indicator pass through */ -#define USB_OTG_GUSBCFG_ULPIIPD_Pos (25U) +#define USB_OTG_GUSBCFG_ULPIIPD_Pos (25U) #define USB_OTG_GUSBCFG_ULPIIPD_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIIPD_Pos) /*!< 0x02000000 */ #define USB_OTG_GUSBCFG_ULPIIPD USB_OTG_GUSBCFG_ULPIIPD_Msk /*!< ULPI interface protect disable */ -#define USB_OTG_GUSBCFG_FHMOD_Pos (29U) +#define USB_OTG_GUSBCFG_FHMOD_Pos (29U) #define USB_OTG_GUSBCFG_FHMOD_Msk (0x1UL << USB_OTG_GUSBCFG_FHMOD_Pos) /*!< 0x20000000 */ #define USB_OTG_GUSBCFG_FHMOD USB_OTG_GUSBCFG_FHMOD_Msk /*!< Forced host mode */ -#define USB_OTG_GUSBCFG_FDMOD_Pos (30U) +#define USB_OTG_GUSBCFG_FDMOD_Pos (30U) #define USB_OTG_GUSBCFG_FDMOD_Msk (0x1UL << USB_OTG_GUSBCFG_FDMOD_Pos) /*!< 0x40000000 */ #define USB_OTG_GUSBCFG_FDMOD USB_OTG_GUSBCFG_FDMOD_Msk /*!< Forced peripheral mode */ -#define USB_OTG_GUSBCFG_CTXPKT_Pos (31U) +#define USB_OTG_GUSBCFG_CTXPKT_Pos (31U) #define USB_OTG_GUSBCFG_CTXPKT_Msk (0x1UL << USB_OTG_GUSBCFG_CTXPKT_Pos) /*!< 0x80000000 */ #define USB_OTG_GUSBCFG_CTXPKT USB_OTG_GUSBCFG_CTXPKT_Msk /*!< Corrupt Tx packet */ /******************** Bit definition for USB_OTG_GRSTCTL register ********************/ -#define USB_OTG_GRSTCTL_CSRST_Pos (0U) +#define USB_OTG_GRSTCTL_CSRST_Pos (0U) #define USB_OTG_GRSTCTL_CSRST_Msk (0x1UL << USB_OTG_GRSTCTL_CSRST_Pos) /*!< 0x00000001 */ #define USB_OTG_GRSTCTL_CSRST USB_OTG_GRSTCTL_CSRST_Msk /*!< Core soft reset */ -#define USB_OTG_GRSTCTL_HSRST_Pos (1U) +#define USB_OTG_GRSTCTL_HSRST_Pos (1U) #define USB_OTG_GRSTCTL_HSRST_Msk (0x1UL << USB_OTG_GRSTCTL_HSRST_Pos) /*!< 0x00000002 */ #define USB_OTG_GRSTCTL_HSRST USB_OTG_GRSTCTL_HSRST_Msk /*!< HCLK soft reset */ -#define USB_OTG_GRSTCTL_FCRST_Pos (2U) +#define USB_OTG_GRSTCTL_FCRST_Pos (2U) #define USB_OTG_GRSTCTL_FCRST_Msk (0x1UL << USB_OTG_GRSTCTL_FCRST_Pos) /*!< 0x00000004 */ #define USB_OTG_GRSTCTL_FCRST USB_OTG_GRSTCTL_FCRST_Msk /*!< Host frame counter reset */ -#define USB_OTG_GRSTCTL_RXFFLSH_Pos (4U) +#define USB_OTG_GRSTCTL_RXFFLSH_Pos (4U) #define USB_OTG_GRSTCTL_RXFFLSH_Msk (0x1UL << USB_OTG_GRSTCTL_RXFFLSH_Pos) /*!< 0x00000010 */ #define USB_OTG_GRSTCTL_RXFFLSH USB_OTG_GRSTCTL_RXFFLSH_Msk /*!< RxFIFO flush */ -#define USB_OTG_GRSTCTL_TXFFLSH_Pos (5U) +#define USB_OTG_GRSTCTL_TXFFLSH_Pos (5U) #define USB_OTG_GRSTCTL_TXFFLSH_Msk (0x1UL << USB_OTG_GRSTCTL_TXFFLSH_Pos) /*!< 0x00000020 */ #define USB_OTG_GRSTCTL_TXFFLSH USB_OTG_GRSTCTL_TXFFLSH_Msk /*!< TxFIFO flush */ -#define USB_OTG_GRSTCTL_TXFNUM_Pos (6U) +#define USB_OTG_GRSTCTL_TXFNUM_Pos (6U) #define USB_OTG_GRSTCTL_TXFNUM_Msk (0x1FUL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x000007C0 */ #define USB_OTG_GRSTCTL_TXFNUM USB_OTG_GRSTCTL_TXFNUM_Msk /*!< TxFIFO number */ #define USB_OTG_GRSTCTL_TXFNUM_0 (0x01UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000040 */ @@ -462,44 +462,44 @@ typedef struct #define USB_OTG_GRSTCTL_TXFNUM_2 (0x04UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000100 */ #define USB_OTG_GRSTCTL_TXFNUM_3 (0x08UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000200 */ #define USB_OTG_GRSTCTL_TXFNUM_4 (0x10UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000400 */ -#define USB_OTG_GRSTCTL_DMAREQ_Pos (30U) +#define USB_OTG_GRSTCTL_DMAREQ_Pos (30U) #define USB_OTG_GRSTCTL_DMAREQ_Msk (0x1UL << USB_OTG_GRSTCTL_DMAREQ_Pos) /*!< 0x40000000 */ #define USB_OTG_GRSTCTL_DMAREQ USB_OTG_GRSTCTL_DMAREQ_Msk /*!< DMA request signal */ -#define USB_OTG_GRSTCTL_AHBIDL_Pos (31U) +#define USB_OTG_GRSTCTL_AHBIDL_Pos (31U) #define USB_OTG_GRSTCTL_AHBIDL_Msk (0x1UL << USB_OTG_GRSTCTL_AHBIDL_Pos) /*!< 0x80000000 */ #define USB_OTG_GRSTCTL_AHBIDL USB_OTG_GRSTCTL_AHBIDL_Msk /*!< AHB master idle */ /******************** Bit definition for USB_OTG_DIEPMSK register ********************/ -#define USB_OTG_DIEPMSK_XFRCM_Pos (0U) +#define USB_OTG_DIEPMSK_XFRCM_Pos (0U) #define USB_OTG_DIEPMSK_XFRCM_Msk (0x1UL << USB_OTG_DIEPMSK_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_DIEPMSK_XFRCM USB_OTG_DIEPMSK_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DIEPMSK_EPDM_Pos (1U) +#define USB_OTG_DIEPMSK_EPDM_Pos (1U) #define USB_OTG_DIEPMSK_EPDM_Msk (0x1UL << USB_OTG_DIEPMSK_EPDM_Pos) /*!< 0x00000002 */ #define USB_OTG_DIEPMSK_EPDM USB_OTG_DIEPMSK_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DIEPMSK_TOM_Pos (3U) +#define USB_OTG_DIEPMSK_TOM_Pos (3U) #define USB_OTG_DIEPMSK_TOM_Msk (0x1UL << USB_OTG_DIEPMSK_TOM_Pos) /*!< 0x00000008 */ #define USB_OTG_DIEPMSK_TOM USB_OTG_DIEPMSK_TOM_Msk /*!< Timeout condition mask (nonisochronous endpoints) */ -#define USB_OTG_DIEPMSK_ITTXFEMSK_Pos (4U) +#define USB_OTG_DIEPMSK_ITTXFEMSK_Pos (4U) #define USB_OTG_DIEPMSK_ITTXFEMSK_Msk (0x1UL << USB_OTG_DIEPMSK_ITTXFEMSK_Pos) /*!< 0x00000010 */ #define USB_OTG_DIEPMSK_ITTXFEMSK USB_OTG_DIEPMSK_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */ -#define USB_OTG_DIEPMSK_INEPNMM_Pos (5U) +#define USB_OTG_DIEPMSK_INEPNMM_Pos (5U) #define USB_OTG_DIEPMSK_INEPNMM_Msk (0x1UL << USB_OTG_DIEPMSK_INEPNMM_Pos) /*!< 0x00000020 */ #define USB_OTG_DIEPMSK_INEPNMM USB_OTG_DIEPMSK_INEPNMM_Msk /*!< IN token received with EP mismatch mask */ -#define USB_OTG_DIEPMSK_INEPNEM_Pos (6U) +#define USB_OTG_DIEPMSK_INEPNEM_Pos (6U) #define USB_OTG_DIEPMSK_INEPNEM_Msk (0x1UL << USB_OTG_DIEPMSK_INEPNEM_Pos) /*!< 0x00000040 */ #define USB_OTG_DIEPMSK_INEPNEM USB_OTG_DIEPMSK_INEPNEM_Msk /*!< IN endpoint NAK effective mask */ -#define USB_OTG_DIEPMSK_TXFURM_Pos (8U) +#define USB_OTG_DIEPMSK_TXFURM_Pos (8U) #define USB_OTG_DIEPMSK_TXFURM_Msk (0x1UL << USB_OTG_DIEPMSK_TXFURM_Pos) /*!< 0x00000100 */ #define USB_OTG_DIEPMSK_TXFURM USB_OTG_DIEPMSK_TXFURM_Msk /*!< FIFO underrun mask */ -#define USB_OTG_DIEPMSK_BIM_Pos (9U) +#define USB_OTG_DIEPMSK_BIM_Pos (9U) #define USB_OTG_DIEPMSK_BIM_Msk (0x1UL << USB_OTG_DIEPMSK_BIM_Pos) /*!< 0x00000200 */ #define USB_OTG_DIEPMSK_BIM USB_OTG_DIEPMSK_BIM_Msk /*!< BNA interrupt mask */ /******************** Bit definition for USB_OTG_HPTXSTS register ********************/ -#define USB_OTG_HPTXSTS_PTXFSAVL_Pos (0U) +#define USB_OTG_HPTXSTS_PTXFSAVL_Pos (0U) #define USB_OTG_HPTXSTS_PTXFSAVL_Msk (0xFFFFUL << USB_OTG_HPTXSTS_PTXFSAVL_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HPTXSTS_PTXFSAVL USB_OTG_HPTXSTS_PTXFSAVL_Msk /*!< Periodic transmit data FIFO space available */ -#define USB_OTG_HPTXSTS_PTXQSAV_Pos (16U) +#define USB_OTG_HPTXSTS_PTXQSAV_Pos (16U) #define USB_OTG_HPTXSTS_PTXQSAV_Msk (0xFFUL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00FF0000 */ #define USB_OTG_HPTXSTS_PTXQSAV USB_OTG_HPTXSTS_PTXQSAV_Msk /*!< Periodic transmit request queue space available */ #define USB_OTG_HPTXSTS_PTXQSAV_0 (0x01UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00010000 */ @@ -511,7 +511,7 @@ typedef struct #define USB_OTG_HPTXSTS_PTXQSAV_6 (0x40UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00400000 */ #define USB_OTG_HPTXSTS_PTXQSAV_7 (0x80UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00800000 */ -#define USB_OTG_HPTXSTS_PTXQTOP_Pos (24U) +#define USB_OTG_HPTXSTS_PTXQTOP_Pos (24U) #define USB_OTG_HPTXSTS_PTXQTOP_Msk (0xFFUL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0xFF000000 */ #define USB_OTG_HPTXSTS_PTXQTOP USB_OTG_HPTXSTS_PTXQTOP_Msk /*!< Top of the periodic transmit request queue */ #define USB_OTG_HPTXSTS_PTXQTOP_0 (0x01UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x01000000 */ @@ -524,36 +524,36 @@ typedef struct #define USB_OTG_HPTXSTS_PTXQTOP_7 (0x80UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x80000000 */ /******************** Bit definition for USB_OTG_HAINT register ********************/ -#define USB_OTG_HAINT_HAINT_Pos (0U) +#define USB_OTG_HAINT_HAINT_Pos (0U) #define USB_OTG_HAINT_HAINT_Msk (0xFFFFUL << USB_OTG_HAINT_HAINT_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HAINT_HAINT USB_OTG_HAINT_HAINT_Msk /*!< Channel interrupts */ /******************** Bit definition for USB_OTG_DOEPMSK register ********************/ -#define USB_OTG_DOEPMSK_XFRCM_Pos (0U) +#define USB_OTG_DOEPMSK_XFRCM_Pos (0U) #define USB_OTG_DOEPMSK_XFRCM_Msk (0x1UL << USB_OTG_DOEPMSK_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_DOEPMSK_XFRCM USB_OTG_DOEPMSK_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DOEPMSK_EPDM_Pos (1U) +#define USB_OTG_DOEPMSK_EPDM_Pos (1U) #define USB_OTG_DOEPMSK_EPDM_Msk (0x1UL << USB_OTG_DOEPMSK_EPDM_Pos) /*!< 0x00000002 */ #define USB_OTG_DOEPMSK_EPDM USB_OTG_DOEPMSK_EPDM_Msk /*!< Endpoint disabled interrupt mask */ #define USB_OTG_DOEPMSK_AHBERRM_Pos (2U) #define USB_OTG_DOEPMSK_AHBERRM_Msk (0x1UL << USB_OTG_DOEPMSK_AHBERRM_Pos) /*!< 0x00000004 */ #define USB_OTG_DOEPMSK_AHBERRM USB_OTG_DOEPMSK_AHBERRM_Msk /*!< OUT transaction AHB Error interrupt mask */ -#define USB_OTG_DOEPMSK_STUPM_Pos (3U) +#define USB_OTG_DOEPMSK_STUPM_Pos (3U) #define USB_OTG_DOEPMSK_STUPM_Msk (0x1UL << USB_OTG_DOEPMSK_STUPM_Pos) /*!< 0x00000008 */ #define USB_OTG_DOEPMSK_STUPM USB_OTG_DOEPMSK_STUPM_Msk /*!< SETUP phase done mask */ -#define USB_OTG_DOEPMSK_OTEPDM_Pos (4U) +#define USB_OTG_DOEPMSK_OTEPDM_Pos (4U) #define USB_OTG_DOEPMSK_OTEPDM_Msk (0x1UL << USB_OTG_DOEPMSK_OTEPDM_Pos) /*!< 0x00000010 */ #define USB_OTG_DOEPMSK_OTEPDM USB_OTG_DOEPMSK_OTEPDM_Msk /*!< OUT token received when endpoint disabled mask */ -#define USB_OTG_DOEPMSK_OTEPSPRM_Pos (5U) +#define USB_OTG_DOEPMSK_OTEPSPRM_Pos (5U) #define USB_OTG_DOEPMSK_OTEPSPRM_Msk (0x1UL << USB_OTG_DOEPMSK_OTEPSPRM_Pos) /*!< 0x00000020 */ #define USB_OTG_DOEPMSK_OTEPSPRM USB_OTG_DOEPMSK_OTEPSPRM_Msk /*!< Status Phase Received mask */ -#define USB_OTG_DOEPMSK_B2BSTUP_Pos (6U) +#define USB_OTG_DOEPMSK_B2BSTUP_Pos (6U) #define USB_OTG_DOEPMSK_B2BSTUP_Msk (0x1UL << USB_OTG_DOEPMSK_B2BSTUP_Pos) /*!< 0x00000040 */ #define USB_OTG_DOEPMSK_B2BSTUP USB_OTG_DOEPMSK_B2BSTUP_Msk /*!< Back-to-back SETUP packets received mask */ -#define USB_OTG_DOEPMSK_OPEM_Pos (8U) +#define USB_OTG_DOEPMSK_OPEM_Pos (8U) #define USB_OTG_DOEPMSK_OPEM_Msk (0x1UL << USB_OTG_DOEPMSK_OPEM_Pos) /*!< 0x00000100 */ #define USB_OTG_DOEPMSK_OPEM USB_OTG_DOEPMSK_OPEM_Msk /*!< OUT packet error mask */ -#define USB_OTG_DOEPMSK_BOIM_Pos (9U) +#define USB_OTG_DOEPMSK_BOIM_Pos (9U) #define USB_OTG_DOEPMSK_BOIM_Msk (0x1UL << USB_OTG_DOEPMSK_BOIM_Pos) /*!< 0x00000200 */ #define USB_OTG_DOEPMSK_BOIM USB_OTG_DOEPMSK_BOIM_Msk /*!< BNA interrupt mask */ #define USB_OTG_DOEPMSK_BERRM_Pos (12U) @@ -566,235 +566,235 @@ typedef struct #define USB_OTG_DOEPMSK_NYETM_Msk (0x1UL << USB_OTG_DOEPMSK_NYETM_Pos) /*!< 0x00004000 */ #define USB_OTG_DOEPMSK_NYETM USB_OTG_DOEPMSK_NYETM_Msk /*!< NYET interrupt mask */ /******************** Bit definition for USB_OTG_GINTSTS register ********************/ -#define USB_OTG_GINTSTS_CMOD_Pos (0U) +#define USB_OTG_GINTSTS_CMOD_Pos (0U) #define USB_OTG_GINTSTS_CMOD_Msk (0x1UL << USB_OTG_GINTSTS_CMOD_Pos) /*!< 0x00000001 */ #define USB_OTG_GINTSTS_CMOD USB_OTG_GINTSTS_CMOD_Msk /*!< Current mode of operation */ -#define USB_OTG_GINTSTS_MMIS_Pos (1U) +#define USB_OTG_GINTSTS_MMIS_Pos (1U) #define USB_OTG_GINTSTS_MMIS_Msk (0x1UL << USB_OTG_GINTSTS_MMIS_Pos) /*!< 0x00000002 */ #define USB_OTG_GINTSTS_MMIS USB_OTG_GINTSTS_MMIS_Msk /*!< Mode mismatch interrupt */ -#define USB_OTG_GINTSTS_OTGINT_Pos (2U) +#define USB_OTG_GINTSTS_OTGINT_Pos (2U) #define USB_OTG_GINTSTS_OTGINT_Msk (0x1UL << USB_OTG_GINTSTS_OTGINT_Pos) /*!< 0x00000004 */ #define USB_OTG_GINTSTS_OTGINT USB_OTG_GINTSTS_OTGINT_Msk /*!< OTG interrupt */ -#define USB_OTG_GINTSTS_SOF_Pos (3U) +#define USB_OTG_GINTSTS_SOF_Pos (3U) #define USB_OTG_GINTSTS_SOF_Msk (0x1UL << USB_OTG_GINTSTS_SOF_Pos) /*!< 0x00000008 */ #define USB_OTG_GINTSTS_SOF USB_OTG_GINTSTS_SOF_Msk /*!< Start of frame */ -#define USB_OTG_GINTSTS_RXFLVL_Pos (4U) +#define USB_OTG_GINTSTS_RXFLVL_Pos (4U) #define USB_OTG_GINTSTS_RXFLVL_Msk (0x1UL << USB_OTG_GINTSTS_RXFLVL_Pos) /*!< 0x00000010 */ #define USB_OTG_GINTSTS_RXFLVL USB_OTG_GINTSTS_RXFLVL_Msk /*!< RxFIFO nonempty */ -#define USB_OTG_GINTSTS_NPTXFE_Pos (5U) +#define USB_OTG_GINTSTS_NPTXFE_Pos (5U) #define USB_OTG_GINTSTS_NPTXFE_Msk (0x1UL << USB_OTG_GINTSTS_NPTXFE_Pos) /*!< 0x00000020 */ #define USB_OTG_GINTSTS_NPTXFE USB_OTG_GINTSTS_NPTXFE_Msk /*!< Nonperiodic TxFIFO empty */ -#define USB_OTG_GINTSTS_GINAKEFF_Pos (6U) +#define USB_OTG_GINTSTS_GINAKEFF_Pos (6U) #define USB_OTG_GINTSTS_GINAKEFF_Msk (0x1UL << USB_OTG_GINTSTS_GINAKEFF_Pos) /*!< 0x00000040 */ #define USB_OTG_GINTSTS_GINAKEFF USB_OTG_GINTSTS_GINAKEFF_Msk /*!< Global IN nonperiodic NAK effective */ -#define USB_OTG_GINTSTS_BOUTNAKEFF_Pos (7U) +#define USB_OTG_GINTSTS_BOUTNAKEFF_Pos (7U) #define USB_OTG_GINTSTS_BOUTNAKEFF_Msk (0x1UL << USB_OTG_GINTSTS_BOUTNAKEFF_Pos) /*!< 0x00000080 */ #define USB_OTG_GINTSTS_BOUTNAKEFF USB_OTG_GINTSTS_BOUTNAKEFF_Msk /*!< Global OUT NAK effective */ -#define USB_OTG_GINTSTS_ESUSP_Pos (10U) +#define USB_OTG_GINTSTS_ESUSP_Pos (10U) #define USB_OTG_GINTSTS_ESUSP_Msk (0x1UL << USB_OTG_GINTSTS_ESUSP_Pos) /*!< 0x00000400 */ #define USB_OTG_GINTSTS_ESUSP USB_OTG_GINTSTS_ESUSP_Msk /*!< Early suspend */ -#define USB_OTG_GINTSTS_USBSUSP_Pos (11U) +#define USB_OTG_GINTSTS_USBSUSP_Pos (11U) #define USB_OTG_GINTSTS_USBSUSP_Msk (0x1UL << USB_OTG_GINTSTS_USBSUSP_Pos) /*!< 0x00000800 */ #define USB_OTG_GINTSTS_USBSUSP USB_OTG_GINTSTS_USBSUSP_Msk /*!< USB suspend */ -#define USB_OTG_GINTSTS_USBRST_Pos (12U) +#define USB_OTG_GINTSTS_USBRST_Pos (12U) #define USB_OTG_GINTSTS_USBRST_Msk (0x1UL << USB_OTG_GINTSTS_USBRST_Pos) /*!< 0x00001000 */ #define USB_OTG_GINTSTS_USBRST USB_OTG_GINTSTS_USBRST_Msk /*!< USB reset */ -#define USB_OTG_GINTSTS_ENUMDNE_Pos (13U) +#define USB_OTG_GINTSTS_ENUMDNE_Pos (13U) #define USB_OTG_GINTSTS_ENUMDNE_Msk (0x1UL << USB_OTG_GINTSTS_ENUMDNE_Pos) /*!< 0x00002000 */ #define USB_OTG_GINTSTS_ENUMDNE USB_OTG_GINTSTS_ENUMDNE_Msk /*!< Enumeration done */ -#define USB_OTG_GINTSTS_ISOODRP_Pos (14U) +#define USB_OTG_GINTSTS_ISOODRP_Pos (14U) #define USB_OTG_GINTSTS_ISOODRP_Msk (0x1UL << USB_OTG_GINTSTS_ISOODRP_Pos) /*!< 0x00004000 */ #define USB_OTG_GINTSTS_ISOODRP USB_OTG_GINTSTS_ISOODRP_Msk /*!< Isochronous OUT packet dropped interrupt */ -#define USB_OTG_GINTSTS_EOPF_Pos (15U) +#define USB_OTG_GINTSTS_EOPF_Pos (15U) #define USB_OTG_GINTSTS_EOPF_Msk (0x1UL << USB_OTG_GINTSTS_EOPF_Pos) /*!< 0x00008000 */ #define USB_OTG_GINTSTS_EOPF USB_OTG_GINTSTS_EOPF_Msk /*!< End of periodic frame interrupt */ -#define USB_OTG_GINTSTS_IEPINT_Pos (18U) +#define USB_OTG_GINTSTS_IEPINT_Pos (18U) #define USB_OTG_GINTSTS_IEPINT_Msk (0x1UL << USB_OTG_GINTSTS_IEPINT_Pos) /*!< 0x00040000 */ #define USB_OTG_GINTSTS_IEPINT USB_OTG_GINTSTS_IEPINT_Msk /*!< IN endpoint interrupt */ -#define USB_OTG_GINTSTS_OEPINT_Pos (19U) +#define USB_OTG_GINTSTS_OEPINT_Pos (19U) #define USB_OTG_GINTSTS_OEPINT_Msk (0x1UL << USB_OTG_GINTSTS_OEPINT_Pos) /*!< 0x00080000 */ #define USB_OTG_GINTSTS_OEPINT USB_OTG_GINTSTS_OEPINT_Msk /*!< OUT endpoint interrupt */ -#define USB_OTG_GINTSTS_IISOIXFR_Pos (20U) +#define USB_OTG_GINTSTS_IISOIXFR_Pos (20U) #define USB_OTG_GINTSTS_IISOIXFR_Msk (0x1UL << USB_OTG_GINTSTS_IISOIXFR_Pos) /*!< 0x00100000 */ #define USB_OTG_GINTSTS_IISOIXFR USB_OTG_GINTSTS_IISOIXFR_Msk /*!< Incomplete isochronous IN transfer */ -#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos (21U) +#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos (21U) #define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Msk (0x1UL << USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos) /*!< 0x00200000 */ #define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Msk /*!< Incomplete periodic transfer */ -#define USB_OTG_GINTSTS_DATAFSUSP_Pos (22U) +#define USB_OTG_GINTSTS_DATAFSUSP_Pos (22U) #define USB_OTG_GINTSTS_DATAFSUSP_Msk (0x1UL << USB_OTG_GINTSTS_DATAFSUSP_Pos) /*!< 0x00400000 */ #define USB_OTG_GINTSTS_DATAFSUSP USB_OTG_GINTSTS_DATAFSUSP_Msk /*!< Data fetch suspended */ -#define USB_OTG_GINTSTS_HPRTINT_Pos (24U) +#define USB_OTG_GINTSTS_HPRTINT_Pos (24U) #define USB_OTG_GINTSTS_HPRTINT_Msk (0x1UL << USB_OTG_GINTSTS_HPRTINT_Pos) /*!< 0x01000000 */ #define USB_OTG_GINTSTS_HPRTINT USB_OTG_GINTSTS_HPRTINT_Msk /*!< Host port interrupt */ -#define USB_OTG_GINTSTS_HCINT_Pos (25U) +#define USB_OTG_GINTSTS_HCINT_Pos (25U) #define USB_OTG_GINTSTS_HCINT_Msk (0x1UL << USB_OTG_GINTSTS_HCINT_Pos) /*!< 0x02000000 */ #define USB_OTG_GINTSTS_HCINT USB_OTG_GINTSTS_HCINT_Msk /*!< Host channels interrupt */ -#define USB_OTG_GINTSTS_PTXFE_Pos (26U) +#define USB_OTG_GINTSTS_PTXFE_Pos (26U) #define USB_OTG_GINTSTS_PTXFE_Msk (0x1UL << USB_OTG_GINTSTS_PTXFE_Pos) /*!< 0x04000000 */ #define USB_OTG_GINTSTS_PTXFE USB_OTG_GINTSTS_PTXFE_Msk /*!< Periodic TxFIFO empty */ -#define USB_OTG_GINTSTS_CIDSCHG_Pos (28U) +#define USB_OTG_GINTSTS_CIDSCHG_Pos (28U) #define USB_OTG_GINTSTS_CIDSCHG_Msk (0x1UL << USB_OTG_GINTSTS_CIDSCHG_Pos) /*!< 0x10000000 */ #define USB_OTG_GINTSTS_CIDSCHG USB_OTG_GINTSTS_CIDSCHG_Msk /*!< Connector ID status change */ -#define USB_OTG_GINTSTS_DISCINT_Pos (29U) +#define USB_OTG_GINTSTS_DISCINT_Pos (29U) #define USB_OTG_GINTSTS_DISCINT_Msk (0x1UL << USB_OTG_GINTSTS_DISCINT_Pos) /*!< 0x20000000 */ #define USB_OTG_GINTSTS_DISCINT USB_OTG_GINTSTS_DISCINT_Msk /*!< Disconnect detected interrupt */ -#define USB_OTG_GINTSTS_SRQINT_Pos (30U) +#define USB_OTG_GINTSTS_SRQINT_Pos (30U) #define USB_OTG_GINTSTS_SRQINT_Msk (0x1UL << USB_OTG_GINTSTS_SRQINT_Pos) /*!< 0x40000000 */ #define USB_OTG_GINTSTS_SRQINT USB_OTG_GINTSTS_SRQINT_Msk /*!< Session request/new session detected interrupt */ -#define USB_OTG_GINTSTS_WKUINT_Pos (31U) +#define USB_OTG_GINTSTS_WKUINT_Pos (31U) #define USB_OTG_GINTSTS_WKUINT_Msk (0x1UL << USB_OTG_GINTSTS_WKUINT_Pos) /*!< 0x80000000 */ #define USB_OTG_GINTSTS_WKUINT USB_OTG_GINTSTS_WKUINT_Msk /*!< Resume/remote wakeup detected interrupt */ /******************** Bit definition for USB_OTG_GINTMSK register ********************/ -#define USB_OTG_GINTMSK_MMISM_Pos (1U) +#define USB_OTG_GINTMSK_MMISM_Pos (1U) #define USB_OTG_GINTMSK_MMISM_Msk (0x1UL << USB_OTG_GINTMSK_MMISM_Pos) /*!< 0x00000002 */ #define USB_OTG_GINTMSK_MMISM USB_OTG_GINTMSK_MMISM_Msk /*!< Mode mismatch interrupt mask */ -#define USB_OTG_GINTMSK_OTGINT_Pos (2U) +#define USB_OTG_GINTMSK_OTGINT_Pos (2U) #define USB_OTG_GINTMSK_OTGINT_Msk (0x1UL << USB_OTG_GINTMSK_OTGINT_Pos) /*!< 0x00000004 */ #define USB_OTG_GINTMSK_OTGINT USB_OTG_GINTMSK_OTGINT_Msk /*!< OTG interrupt mask */ -#define USB_OTG_GINTMSK_SOFM_Pos (3U) +#define USB_OTG_GINTMSK_SOFM_Pos (3U) #define USB_OTG_GINTMSK_SOFM_Msk (0x1UL << USB_OTG_GINTMSK_SOFM_Pos) /*!< 0x00000008 */ #define USB_OTG_GINTMSK_SOFM USB_OTG_GINTMSK_SOFM_Msk /*!< Start of frame mask */ -#define USB_OTG_GINTMSK_RXFLVLM_Pos (4U) +#define USB_OTG_GINTMSK_RXFLVLM_Pos (4U) #define USB_OTG_GINTMSK_RXFLVLM_Msk (0x1UL << USB_OTG_GINTMSK_RXFLVLM_Pos) /*!< 0x00000010 */ #define USB_OTG_GINTMSK_RXFLVLM USB_OTG_GINTMSK_RXFLVLM_Msk /*!< Receive FIFO nonempty mask */ -#define USB_OTG_GINTMSK_NPTXFEM_Pos (5U) +#define USB_OTG_GINTMSK_NPTXFEM_Pos (5U) #define USB_OTG_GINTMSK_NPTXFEM_Msk (0x1UL << USB_OTG_GINTMSK_NPTXFEM_Pos) /*!< 0x00000020 */ #define USB_OTG_GINTMSK_NPTXFEM USB_OTG_GINTMSK_NPTXFEM_Msk /*!< Nonperiodic TxFIFO empty mask */ -#define USB_OTG_GINTMSK_GINAKEFFM_Pos (6U) +#define USB_OTG_GINTMSK_GINAKEFFM_Pos (6U) #define USB_OTG_GINTMSK_GINAKEFFM_Msk (0x1UL << USB_OTG_GINTMSK_GINAKEFFM_Pos) /*!< 0x00000040 */ #define USB_OTG_GINTMSK_GINAKEFFM USB_OTG_GINTMSK_GINAKEFFM_Msk /*!< Global nonperiodic IN NAK effective mask */ -#define USB_OTG_GINTMSK_GONAKEFFM_Pos (7U) +#define USB_OTG_GINTMSK_GONAKEFFM_Pos (7U) #define USB_OTG_GINTMSK_GONAKEFFM_Msk (0x1UL << USB_OTG_GINTMSK_GONAKEFFM_Pos) /*!< 0x00000080 */ #define USB_OTG_GINTMSK_GONAKEFFM USB_OTG_GINTMSK_GONAKEFFM_Msk /*!< Global OUT NAK effective mask */ -#define USB_OTG_GINTMSK_ESUSPM_Pos (10U) +#define USB_OTG_GINTMSK_ESUSPM_Pos (10U) #define USB_OTG_GINTMSK_ESUSPM_Msk (0x1UL << USB_OTG_GINTMSK_ESUSPM_Pos) /*!< 0x00000400 */ #define USB_OTG_GINTMSK_ESUSPM USB_OTG_GINTMSK_ESUSPM_Msk /*!< Early suspend mask */ -#define USB_OTG_GINTMSK_USBSUSPM_Pos (11U) +#define USB_OTG_GINTMSK_USBSUSPM_Pos (11U) #define USB_OTG_GINTMSK_USBSUSPM_Msk (0x1UL << USB_OTG_GINTMSK_USBSUSPM_Pos) /*!< 0x00000800 */ #define USB_OTG_GINTMSK_USBSUSPM USB_OTG_GINTMSK_USBSUSPM_Msk /*!< USB suspend mask */ -#define USB_OTG_GINTMSK_USBRST_Pos (12U) +#define USB_OTG_GINTMSK_USBRST_Pos (12U) #define USB_OTG_GINTMSK_USBRST_Msk (0x1UL << USB_OTG_GINTMSK_USBRST_Pos) /*!< 0x00001000 */ #define USB_OTG_GINTMSK_USBRST USB_OTG_GINTMSK_USBRST_Msk /*!< USB reset mask */ -#define USB_OTG_GINTMSK_ENUMDNEM_Pos (13U) +#define USB_OTG_GINTMSK_ENUMDNEM_Pos (13U) #define USB_OTG_GINTMSK_ENUMDNEM_Msk (0x1UL << USB_OTG_GINTMSK_ENUMDNEM_Pos) /*!< 0x00002000 */ #define USB_OTG_GINTMSK_ENUMDNEM USB_OTG_GINTMSK_ENUMDNEM_Msk /*!< Enumeration done mask */ -#define USB_OTG_GINTMSK_ISOODRPM_Pos (14U) +#define USB_OTG_GINTMSK_ISOODRPM_Pos (14U) #define USB_OTG_GINTMSK_ISOODRPM_Msk (0x1UL << USB_OTG_GINTMSK_ISOODRPM_Pos) /*!< 0x00004000 */ #define USB_OTG_GINTMSK_ISOODRPM USB_OTG_GINTMSK_ISOODRPM_Msk /*!< Isochronous OUT packet dropped interrupt mask */ -#define USB_OTG_GINTMSK_EOPFM_Pos (15U) +#define USB_OTG_GINTMSK_EOPFM_Pos (15U) #define USB_OTG_GINTMSK_EOPFM_Msk (0x1UL << USB_OTG_GINTMSK_EOPFM_Pos) /*!< 0x00008000 */ #define USB_OTG_GINTMSK_EOPFM USB_OTG_GINTMSK_EOPFM_Msk /*!< End of periodic frame interrupt mask */ -#define USB_OTG_GINTMSK_EPMISM_Pos (17U) +#define USB_OTG_GINTMSK_EPMISM_Pos (17U) #define USB_OTG_GINTMSK_EPMISM_Msk (0x1UL << USB_OTG_GINTMSK_EPMISM_Pos) /*!< 0x00020000 */ #define USB_OTG_GINTMSK_EPMISM USB_OTG_GINTMSK_EPMISM_Msk /*!< Endpoint mismatch interrupt mask */ -#define USB_OTG_GINTMSK_IEPINT_Pos (18U) +#define USB_OTG_GINTMSK_IEPINT_Pos (18U) #define USB_OTG_GINTMSK_IEPINT_Msk (0x1UL << USB_OTG_GINTMSK_IEPINT_Pos) /*!< 0x00040000 */ #define USB_OTG_GINTMSK_IEPINT USB_OTG_GINTMSK_IEPINT_Msk /*!< IN endpoints interrupt mask */ -#define USB_OTG_GINTMSK_OEPINT_Pos (19U) +#define USB_OTG_GINTMSK_OEPINT_Pos (19U) #define USB_OTG_GINTMSK_OEPINT_Msk (0x1UL << USB_OTG_GINTMSK_OEPINT_Pos) /*!< 0x00080000 */ #define USB_OTG_GINTMSK_OEPINT USB_OTG_GINTMSK_OEPINT_Msk /*!< OUT endpoints interrupt mask */ -#define USB_OTG_GINTMSK_IISOIXFRM_Pos (20U) +#define USB_OTG_GINTMSK_IISOIXFRM_Pos (20U) #define USB_OTG_GINTMSK_IISOIXFRM_Msk (0x1UL << USB_OTG_GINTMSK_IISOIXFRM_Pos) /*!< 0x00100000 */ #define USB_OTG_GINTMSK_IISOIXFRM USB_OTG_GINTMSK_IISOIXFRM_Msk /*!< Incomplete isochronous IN transfer mask */ -#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos (21U) +#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos (21U) #define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Msk (0x1UL << USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos) /*!< 0x00200000 */ #define USB_OTG_GINTMSK_PXFRM_IISOOXFRM USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Msk /*!< Incomplete periodic transfer mask */ -#define USB_OTG_GINTMSK_FSUSPM_Pos (22U) +#define USB_OTG_GINTMSK_FSUSPM_Pos (22U) #define USB_OTG_GINTMSK_FSUSPM_Msk (0x1UL << USB_OTG_GINTMSK_FSUSPM_Pos) /*!< 0x00400000 */ #define USB_OTG_GINTMSK_FSUSPM USB_OTG_GINTMSK_FSUSPM_Msk /*!< Data fetch suspended mask */ -#define USB_OTG_GINTMSK_PRTIM_Pos (24U) +#define USB_OTG_GINTMSK_PRTIM_Pos (24U) #define USB_OTG_GINTMSK_PRTIM_Msk (0x1UL << USB_OTG_GINTMSK_PRTIM_Pos) /*!< 0x01000000 */ #define USB_OTG_GINTMSK_PRTIM USB_OTG_GINTMSK_PRTIM_Msk /*!< Host port interrupt mask */ -#define USB_OTG_GINTMSK_HCIM_Pos (25U) +#define USB_OTG_GINTMSK_HCIM_Pos (25U) #define USB_OTG_GINTMSK_HCIM_Msk (0x1UL << USB_OTG_GINTMSK_HCIM_Pos) /*!< 0x02000000 */ #define USB_OTG_GINTMSK_HCIM USB_OTG_GINTMSK_HCIM_Msk /*!< Host channels interrupt mask */ -#define USB_OTG_GINTMSK_PTXFEM_Pos (26U) +#define USB_OTG_GINTMSK_PTXFEM_Pos (26U) #define USB_OTG_GINTMSK_PTXFEM_Msk (0x1UL << USB_OTG_GINTMSK_PTXFEM_Pos) /*!< 0x04000000 */ #define USB_OTG_GINTMSK_PTXFEM USB_OTG_GINTMSK_PTXFEM_Msk /*!< Periodic TxFIFO empty mask */ -#define USB_OTG_GINTMSK_CIDSCHGM_Pos (28U) +#define USB_OTG_GINTMSK_CIDSCHGM_Pos (28U) #define USB_OTG_GINTMSK_CIDSCHGM_Msk (0x1UL << USB_OTG_GINTMSK_CIDSCHGM_Pos) /*!< 0x10000000 */ #define USB_OTG_GINTMSK_CIDSCHGM USB_OTG_GINTMSK_CIDSCHGM_Msk /*!< Connector ID status change mask */ -#define USB_OTG_GINTMSK_DISCINT_Pos (29U) +#define USB_OTG_GINTMSK_DISCINT_Pos (29U) #define USB_OTG_GINTMSK_DISCINT_Msk (0x1UL << USB_OTG_GINTMSK_DISCINT_Pos) /*!< 0x20000000 */ #define USB_OTG_GINTMSK_DISCINT USB_OTG_GINTMSK_DISCINT_Msk /*!< Disconnect detected interrupt mask */ -#define USB_OTG_GINTMSK_SRQIM_Pos (30U) +#define USB_OTG_GINTMSK_SRQIM_Pos (30U) #define USB_OTG_GINTMSK_SRQIM_Msk (0x1UL << USB_OTG_GINTMSK_SRQIM_Pos) /*!< 0x40000000 */ #define USB_OTG_GINTMSK_SRQIM USB_OTG_GINTMSK_SRQIM_Msk /*!< Session request/new session detected interrupt mask */ -#define USB_OTG_GINTMSK_WUIM_Pos (31U) +#define USB_OTG_GINTMSK_WUIM_Pos (31U) #define USB_OTG_GINTMSK_WUIM_Msk (0x1UL << USB_OTG_GINTMSK_WUIM_Pos) /*!< 0x80000000 */ #define USB_OTG_GINTMSK_WUIM USB_OTG_GINTMSK_WUIM_Msk /*!< Resume/remote wakeup detected interrupt mask */ /******************** Bit definition for USB_OTG_DAINT register ********************/ -#define USB_OTG_DAINT_IEPINT_Pos (0U) +#define USB_OTG_DAINT_IEPINT_Pos (0U) #define USB_OTG_DAINT_IEPINT_Msk (0xFFFFUL << USB_OTG_DAINT_IEPINT_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DAINT_IEPINT USB_OTG_DAINT_IEPINT_Msk /*!< IN endpoint interrupt bits */ -#define USB_OTG_DAINT_OEPINT_Pos (16U) +#define USB_OTG_DAINT_OEPINT_Pos (16U) #define USB_OTG_DAINT_OEPINT_Msk (0xFFFFUL << USB_OTG_DAINT_OEPINT_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_DAINT_OEPINT USB_OTG_DAINT_OEPINT_Msk /*!< OUT endpoint interrupt bits */ /******************** Bit definition for USB_OTG_HAINTMSK register ********************/ -#define USB_OTG_HAINTMSK_HAINTM_Pos (0U) +#define USB_OTG_HAINTMSK_HAINTM_Pos (0U) #define USB_OTG_HAINTMSK_HAINTM_Msk (0xFFFFUL << USB_OTG_HAINTMSK_HAINTM_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HAINTMSK_HAINTM USB_OTG_HAINTMSK_HAINTM_Msk /*!< Channel interrupt mask */ /******************** Bit definition for USB_OTG_GRXSTSP register ********************/ -#define USB_OTG_GRXSTSP_EPNUM_Pos (0U) +#define USB_OTG_GRXSTSP_EPNUM_Pos (0U) #define USB_OTG_GRXSTSP_EPNUM_Msk (0xFUL << USB_OTG_GRXSTSP_EPNUM_Pos) /*!< 0x0000000F */ #define USB_OTG_GRXSTSP_EPNUM USB_OTG_GRXSTSP_EPNUM_Msk /*!< IN EP interrupt mask bits */ -#define USB_OTG_GRXSTSP_BCNT_Pos (4U) +#define USB_OTG_GRXSTSP_BCNT_Pos (4U) #define USB_OTG_GRXSTSP_BCNT_Msk (0x7FFUL << USB_OTG_GRXSTSP_BCNT_Pos) /*!< 0x00007FF0 */ #define USB_OTG_GRXSTSP_BCNT USB_OTG_GRXSTSP_BCNT_Msk /*!< OUT EP interrupt mask bits */ -#define USB_OTG_GRXSTSP_DPID_Pos (15U) +#define USB_OTG_GRXSTSP_DPID_Pos (15U) #define USB_OTG_GRXSTSP_DPID_Msk (0x3UL << USB_OTG_GRXSTSP_DPID_Pos) /*!< 0x00018000 */ #define USB_OTG_GRXSTSP_DPID USB_OTG_GRXSTSP_DPID_Msk /*!< OUT EP interrupt mask bits */ -#define USB_OTG_GRXSTSP_PKTSTS_Pos (17U) +#define USB_OTG_GRXSTSP_PKTSTS_Pos (17U) #define USB_OTG_GRXSTSP_PKTSTS_Msk (0xFUL << USB_OTG_GRXSTSP_PKTSTS_Pos) /*!< 0x001E0000 */ #define USB_OTG_GRXSTSP_PKTSTS USB_OTG_GRXSTSP_PKTSTS_Msk /*!< OUT EP interrupt mask bits */ /******************** Bit definition for USB_OTG_DAINTMSK register ********************/ -#define USB_OTG_DAINTMSK_IEPM_Pos (0U) +#define USB_OTG_DAINTMSK_IEPM_Pos (0U) #define USB_OTG_DAINTMSK_IEPM_Msk (0xFFFFUL << USB_OTG_DAINTMSK_IEPM_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DAINTMSK_IEPM USB_OTG_DAINTMSK_IEPM_Msk /*!< IN EP interrupt mask bits */ -#define USB_OTG_DAINTMSK_OEPM_Pos (16U) +#define USB_OTG_DAINTMSK_OEPM_Pos (16U) #define USB_OTG_DAINTMSK_OEPM_Msk (0xFFFFUL << USB_OTG_DAINTMSK_OEPM_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_DAINTMSK_OEPM USB_OTG_DAINTMSK_OEPM_Msk /*!< OUT EP interrupt mask bits */ /******************** Bit definition for USB_OTG_GRXFSIZ register ********************/ -#define USB_OTG_GRXFSIZ_RXFD_Pos (0U) +#define USB_OTG_GRXFSIZ_RXFD_Pos (0U) #define USB_OTG_GRXFSIZ_RXFD_Msk (0xFFFFUL << USB_OTG_GRXFSIZ_RXFD_Pos) /*!< 0x0000FFFF */ #define USB_OTG_GRXFSIZ_RXFD USB_OTG_GRXFSIZ_RXFD_Msk /*!< RxFIFO depth */ /******************** Bit definition for USB_OTG_DVBUSDIS register ********************/ -#define USB_OTG_DVBUSDIS_VBUSDT_Pos (0U) +#define USB_OTG_DVBUSDIS_VBUSDT_Pos (0U) #define USB_OTG_DVBUSDIS_VBUSDT_Msk (0xFFFFUL << USB_OTG_DVBUSDIS_VBUSDT_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DVBUSDIS_VBUSDT USB_OTG_DVBUSDIS_VBUSDT_Msk /*!< Device VBUS discharge time */ /******************** Bit definition for OTG register ********************/ -#define USB_OTG_NPTXFSA_Pos (0U) +#define USB_OTG_NPTXFSA_Pos (0U) #define USB_OTG_NPTXFSA_Msk (0xFFFFUL << USB_OTG_NPTXFSA_Pos) /*!< 0x0000FFFF */ #define USB_OTG_NPTXFSA USB_OTG_NPTXFSA_Msk /*!< Nonperiodic transmit RAM start address */ -#define USB_OTG_NPTXFD_Pos (16U) +#define USB_OTG_NPTXFD_Pos (16U) #define USB_OTG_NPTXFD_Msk (0xFFFFUL << USB_OTG_NPTXFD_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_NPTXFD USB_OTG_NPTXFD_Msk /*!< Nonperiodic TxFIFO depth */ -#define USB_OTG_TX0FSA_Pos (0U) +#define USB_OTG_TX0FSA_Pos (0U) #define USB_OTG_TX0FSA_Msk (0xFFFFUL << USB_OTG_TX0FSA_Pos) /*!< 0x0000FFFF */ #define USB_OTG_TX0FSA USB_OTG_TX0FSA_Msk /*!< Endpoint 0 transmit RAM start address */ -#define USB_OTG_TX0FD_Pos (16U) +#define USB_OTG_TX0FD_Pos (16U) #define USB_OTG_TX0FD_Msk (0xFFFFUL << USB_OTG_TX0FD_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_TX0FD USB_OTG_TX0FD_Msk /*!< Endpoint 0 TxFIFO depth */ /******************** Bit definition for USB_OTG_DVBUSPULSE register ********************/ -#define USB_OTG_DVBUSPULSE_DVBUSP_Pos (0U) +#define USB_OTG_DVBUSPULSE_DVBUSP_Pos (0U) #define USB_OTG_DVBUSPULSE_DVBUSP_Msk (0xFFFUL << USB_OTG_DVBUSPULSE_DVBUSP_Pos) /*!< 0x00000FFF */ #define USB_OTG_DVBUSPULSE_DVBUSP USB_OTG_DVBUSPULSE_DVBUSP_Msk /*!< Device VBUS pulsing time */ /******************** Bit definition for USB_OTG_GNPTXSTS register ********************/ -#define USB_OTG_GNPTXSTS_NPTXFSAV_Pos (0U) +#define USB_OTG_GNPTXSTS_NPTXFSAV_Pos (0U) #define USB_OTG_GNPTXSTS_NPTXFSAV_Msk (0xFFFFUL << USB_OTG_GNPTXSTS_NPTXFSAV_Pos) /*!< 0x0000FFFF */ #define USB_OTG_GNPTXSTS_NPTXFSAV USB_OTG_GNPTXSTS_NPTXFSAV_Msk /*!< Nonperiodic TxFIFO space available */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_Pos (16U) +#define USB_OTG_GNPTXSTS_NPTQXSAV_Pos (16U) #define USB_OTG_GNPTXSTS_NPTQXSAV_Msk (0xFFUL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00FF0000 */ #define USB_OTG_GNPTXSTS_NPTQXSAV USB_OTG_GNPTXSTS_NPTQXSAV_Msk /*!< Nonperiodic transmit request queue space available */ #define USB_OTG_GNPTXSTS_NPTQXSAV_0 (0x01UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00010000 */ @@ -806,7 +806,7 @@ typedef struct #define USB_OTG_GNPTXSTS_NPTQXSAV_6 (0x40UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00400000 */ #define USB_OTG_GNPTXSTS_NPTQXSAV_7 (0x80UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00800000 */ -#define USB_OTG_GNPTXSTS_NPTXQTOP_Pos (24U) +#define USB_OTG_GNPTXSTS_NPTXQTOP_Pos (24U) #define USB_OTG_GNPTXSTS_NPTXQTOP_Msk (0x7FUL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x7F000000 */ #define USB_OTG_GNPTXSTS_NPTXQTOP USB_OTG_GNPTXSTS_NPTXQTOP_Msk /*!< Top of the nonperiodic transmit request queue */ #define USB_OTG_GNPTXSTS_NPTXQTOP_0 (0x01UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x01000000 */ @@ -818,14 +818,14 @@ typedef struct #define USB_OTG_GNPTXSTS_NPTXQTOP_6 (0x40UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x40000000 */ /******************** Bit definition for USB_OTG_DTHRCTL register ********************/ -#define USB_OTG_DTHRCTL_NONISOTHREN_Pos (0U) +#define USB_OTG_DTHRCTL_NONISOTHREN_Pos (0U) #define USB_OTG_DTHRCTL_NONISOTHREN_Msk (0x1UL << USB_OTG_DTHRCTL_NONISOTHREN_Pos) /*!< 0x00000001 */ #define USB_OTG_DTHRCTL_NONISOTHREN USB_OTG_DTHRCTL_NONISOTHREN_Msk /*!< Nonisochronous IN endpoints threshold enable */ -#define USB_OTG_DTHRCTL_ISOTHREN_Pos (1U) +#define USB_OTG_DTHRCTL_ISOTHREN_Pos (1U) #define USB_OTG_DTHRCTL_ISOTHREN_Msk (0x1UL << USB_OTG_DTHRCTL_ISOTHREN_Pos) /*!< 0x00000002 */ #define USB_OTG_DTHRCTL_ISOTHREN USB_OTG_DTHRCTL_ISOTHREN_Msk /*!< ISO IN endpoint threshold enable */ -#define USB_OTG_DTHRCTL_TXTHRLEN_Pos (2U) +#define USB_OTG_DTHRCTL_TXTHRLEN_Pos (2U) #define USB_OTG_DTHRCTL_TXTHRLEN_Msk (0x1FFUL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x000007FC */ #define USB_OTG_DTHRCTL_TXTHRLEN USB_OTG_DTHRCTL_TXTHRLEN_Msk /*!< Transmit threshold length */ #define USB_OTG_DTHRCTL_TXTHRLEN_0 (0x001UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000004 */ @@ -837,11 +837,11 @@ typedef struct #define USB_OTG_DTHRCTL_TXTHRLEN_6 (0x040UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000100 */ #define USB_OTG_DTHRCTL_TXTHRLEN_7 (0x080UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000200 */ #define USB_OTG_DTHRCTL_TXTHRLEN_8 (0x100UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000400 */ -#define USB_OTG_DTHRCTL_RXTHREN_Pos (16U) +#define USB_OTG_DTHRCTL_RXTHREN_Pos (16U) #define USB_OTG_DTHRCTL_RXTHREN_Msk (0x1UL << USB_OTG_DTHRCTL_RXTHREN_Pos) /*!< 0x00010000 */ #define USB_OTG_DTHRCTL_RXTHREN USB_OTG_DTHRCTL_RXTHREN_Msk /*!< Receive threshold enable */ -#define USB_OTG_DTHRCTL_RXTHRLEN_Pos (17U) +#define USB_OTG_DTHRCTL_RXTHRLEN_Pos (17U) #define USB_OTG_DTHRCTL_RXTHRLEN_Msk (0x1FFUL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x03FE0000 */ #define USB_OTG_DTHRCTL_RXTHRLEN USB_OTG_DTHRCTL_RXTHRLEN_Msk /*!< Receive threshold length */ #define USB_OTG_DTHRCTL_RXTHRLEN_0 (0x001UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00020000 */ @@ -853,118 +853,118 @@ typedef struct #define USB_OTG_DTHRCTL_RXTHRLEN_6 (0x040UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00800000 */ #define USB_OTG_DTHRCTL_RXTHRLEN_7 (0x080UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x01000000 */ #define USB_OTG_DTHRCTL_RXTHRLEN_8 (0x100UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x02000000 */ -#define USB_OTG_DTHRCTL_ARPEN_Pos (27U) +#define USB_OTG_DTHRCTL_ARPEN_Pos (27U) #define USB_OTG_DTHRCTL_ARPEN_Msk (0x1UL << USB_OTG_DTHRCTL_ARPEN_Pos) /*!< 0x08000000 */ #define USB_OTG_DTHRCTL_ARPEN USB_OTG_DTHRCTL_ARPEN_Msk /*!< Arbiter parking enable */ /******************** Bit definition for USB_OTG_DIEPEMPMSK register ********************/ -#define USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos (0U) +#define USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos (0U) #define USB_OTG_DIEPEMPMSK_INEPTXFEM_Msk (0xFFFFUL << USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DIEPEMPMSK_INEPTXFEM USB_OTG_DIEPEMPMSK_INEPTXFEM_Msk /*!< IN EP Tx FIFO empty interrupt mask bits */ /******************** Bit definition for USB_OTG_DEACHINT register ********************/ -#define USB_OTG_DEACHINT_IEP1INT_Pos (1U) +#define USB_OTG_DEACHINT_IEP1INT_Pos (1U) #define USB_OTG_DEACHINT_IEP1INT_Msk (0x1UL << USB_OTG_DEACHINT_IEP1INT_Pos) /*!< 0x00000002 */ #define USB_OTG_DEACHINT_IEP1INT USB_OTG_DEACHINT_IEP1INT_Msk /*!< IN endpoint 1interrupt bit */ -#define USB_OTG_DEACHINT_OEP1INT_Pos (17U) +#define USB_OTG_DEACHINT_OEP1INT_Pos (17U) #define USB_OTG_DEACHINT_OEP1INT_Msk (0x1UL << USB_OTG_DEACHINT_OEP1INT_Pos) /*!< 0x00020000 */ #define USB_OTG_DEACHINT_OEP1INT USB_OTG_DEACHINT_OEP1INT_Msk /*!< OUT endpoint 1 interrupt bit */ /******************** Bit definition for USB_OTG_GCCFG register ********************/ -#define USB_OTG_GCCFG_PWRDWN_Pos (16U) +#define USB_OTG_GCCFG_PWRDWN_Pos (16U) #define USB_OTG_GCCFG_PWRDWN_Msk (0x1UL << USB_OTG_GCCFG_PWRDWN_Pos) /*!< 0x00010000 */ #define USB_OTG_GCCFG_PWRDWN USB_OTG_GCCFG_PWRDWN_Msk /*!< Power down */ -#define USB_OTG_GCCFG_VBUSASEN_Pos (18U) +#define USB_OTG_GCCFG_VBUSASEN_Pos (18U) #define USB_OTG_GCCFG_VBUSASEN_Msk (0x1UL << USB_OTG_GCCFG_VBUSASEN_Pos) /*!< 0x00040000 */ #define USB_OTG_GCCFG_VBUSASEN USB_OTG_GCCFG_VBUSASEN_Msk /*!< Enable the VBUS sensing device */ -#define USB_OTG_GCCFG_VBUSBSEN_Pos (19U) +#define USB_OTG_GCCFG_VBUSBSEN_Pos (19U) #define USB_OTG_GCCFG_VBUSBSEN_Msk (0x1UL << USB_OTG_GCCFG_VBUSBSEN_Pos) /*!< 0x00080000 */ #define USB_OTG_GCCFG_VBUSBSEN USB_OTG_GCCFG_VBUSBSEN_Msk /*!< Enable the VBUS sensing device */ -#define USB_OTG_GCCFG_SOFOUTEN_Pos (20U) +#define USB_OTG_GCCFG_SOFOUTEN_Pos (20U) #define USB_OTG_GCCFG_SOFOUTEN_Msk (0x1UL << USB_OTG_GCCFG_SOFOUTEN_Pos) /*!< 0x00100000 */ #define USB_OTG_GCCFG_SOFOUTEN USB_OTG_GCCFG_SOFOUTEN_Msk /*!< SOF output enable */ /******************** Bit definition for USB_OTG_DEACHINTMSK register ********************/ -#define USB_OTG_DEACHINTMSK_IEP1INTM_Pos (1U) +#define USB_OTG_DEACHINTMSK_IEP1INTM_Pos (1U) #define USB_OTG_DEACHINTMSK_IEP1INTM_Msk (0x1UL << USB_OTG_DEACHINTMSK_IEP1INTM_Pos) /*!< 0x00000002 */ #define USB_OTG_DEACHINTMSK_IEP1INTM USB_OTG_DEACHINTMSK_IEP1INTM_Msk /*!< IN Endpoint 1 interrupt mask bit */ -#define USB_OTG_DEACHINTMSK_OEP1INTM_Pos (17U) +#define USB_OTG_DEACHINTMSK_OEP1INTM_Pos (17U) #define USB_OTG_DEACHINTMSK_OEP1INTM_Msk (0x1UL << USB_OTG_DEACHINTMSK_OEP1INTM_Pos) /*!< 0x00020000 */ #define USB_OTG_DEACHINTMSK_OEP1INTM USB_OTG_DEACHINTMSK_OEP1INTM_Msk /*!< OUT Endpoint 1 interrupt mask bit */ /******************** Bit definition for USB_OTG_CID register ********************/ -#define USB_OTG_CID_PRODUCT_ID_Pos (0U) +#define USB_OTG_CID_PRODUCT_ID_Pos (0U) #define USB_OTG_CID_PRODUCT_ID_Msk (0xFFFFFFFFUL << USB_OTG_CID_PRODUCT_ID_Pos) /*!< 0xFFFFFFFF */ #define USB_OTG_CID_PRODUCT_ID USB_OTG_CID_PRODUCT_ID_Msk /*!< Product ID field */ /******************** Bit definition for USB_OTG_DIEPEACHMSK1 register ********************/ -#define USB_OTG_DIEPEACHMSK1_XFRCM_Pos (0U) +#define USB_OTG_DIEPEACHMSK1_XFRCM_Pos (0U) #define USB_OTG_DIEPEACHMSK1_XFRCM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_DIEPEACHMSK1_XFRCM USB_OTG_DIEPEACHMSK1_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DIEPEACHMSK1_EPDM_Pos (1U) +#define USB_OTG_DIEPEACHMSK1_EPDM_Pos (1U) #define USB_OTG_DIEPEACHMSK1_EPDM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_EPDM_Pos) /*!< 0x00000002 */ #define USB_OTG_DIEPEACHMSK1_EPDM USB_OTG_DIEPEACHMSK1_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DIEPEACHMSK1_TOM_Pos (3U) +#define USB_OTG_DIEPEACHMSK1_TOM_Pos (3U) #define USB_OTG_DIEPEACHMSK1_TOM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_TOM_Pos) /*!< 0x00000008 */ #define USB_OTG_DIEPEACHMSK1_TOM USB_OTG_DIEPEACHMSK1_TOM_Msk /*!< Timeout condition mask (nonisochronous endpoints) */ -#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos (4U) +#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos (4U) #define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos) /*!< 0x00000010 */ #define USB_OTG_DIEPEACHMSK1_ITTXFEMSK USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */ -#define USB_OTG_DIEPEACHMSK1_INEPNMM_Pos (5U) +#define USB_OTG_DIEPEACHMSK1_INEPNMM_Pos (5U) #define USB_OTG_DIEPEACHMSK1_INEPNMM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_INEPNMM_Pos) /*!< 0x00000020 */ #define USB_OTG_DIEPEACHMSK1_INEPNMM USB_OTG_DIEPEACHMSK1_INEPNMM_Msk /*!< IN token received with EP mismatch mask */ -#define USB_OTG_DIEPEACHMSK1_INEPNEM_Pos (6U) +#define USB_OTG_DIEPEACHMSK1_INEPNEM_Pos (6U) #define USB_OTG_DIEPEACHMSK1_INEPNEM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_INEPNEM_Pos) /*!< 0x00000040 */ #define USB_OTG_DIEPEACHMSK1_INEPNEM USB_OTG_DIEPEACHMSK1_INEPNEM_Msk /*!< IN endpoint NAK effective mask */ -#define USB_OTG_DIEPEACHMSK1_TXFURM_Pos (8U) +#define USB_OTG_DIEPEACHMSK1_TXFURM_Pos (8U) #define USB_OTG_DIEPEACHMSK1_TXFURM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_TXFURM_Pos) /*!< 0x00000100 */ #define USB_OTG_DIEPEACHMSK1_TXFURM USB_OTG_DIEPEACHMSK1_TXFURM_Msk /*!< FIFO underrun mask */ -#define USB_OTG_DIEPEACHMSK1_BIM_Pos (9U) +#define USB_OTG_DIEPEACHMSK1_BIM_Pos (9U) #define USB_OTG_DIEPEACHMSK1_BIM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_BIM_Pos) /*!< 0x00000200 */ #define USB_OTG_DIEPEACHMSK1_BIM USB_OTG_DIEPEACHMSK1_BIM_Msk /*!< BNA interrupt mask */ -#define USB_OTG_DIEPEACHMSK1_NAKM_Pos (13U) +#define USB_OTG_DIEPEACHMSK1_NAKM_Pos (13U) #define USB_OTG_DIEPEACHMSK1_NAKM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_NAKM_Pos) /*!< 0x00002000 */ #define USB_OTG_DIEPEACHMSK1_NAKM USB_OTG_DIEPEACHMSK1_NAKM_Msk /*!< NAK interrupt mask */ /******************** Bit definition for USB_OTG_HPRT register ********************/ -#define USB_OTG_HPRT_PCSTS_Pos (0U) +#define USB_OTG_HPRT_PCSTS_Pos (0U) #define USB_OTG_HPRT_PCSTS_Msk (0x1UL << USB_OTG_HPRT_PCSTS_Pos) /*!< 0x00000001 */ #define USB_OTG_HPRT_PCSTS USB_OTG_HPRT_PCSTS_Msk /*!< Port connect status */ -#define USB_OTG_HPRT_PCDET_Pos (1U) +#define USB_OTG_HPRT_PCDET_Pos (1U) #define USB_OTG_HPRT_PCDET_Msk (0x1UL << USB_OTG_HPRT_PCDET_Pos) /*!< 0x00000002 */ #define USB_OTG_HPRT_PCDET USB_OTG_HPRT_PCDET_Msk /*!< Port connect detected */ -#define USB_OTG_HPRT_PENA_Pos (2U) +#define USB_OTG_HPRT_PENA_Pos (2U) #define USB_OTG_HPRT_PENA_Msk (0x1UL << USB_OTG_HPRT_PENA_Pos) /*!< 0x00000004 */ #define USB_OTG_HPRT_PENA USB_OTG_HPRT_PENA_Msk /*!< Port enable */ -#define USB_OTG_HPRT_PENCHNG_Pos (3U) +#define USB_OTG_HPRT_PENCHNG_Pos (3U) #define USB_OTG_HPRT_PENCHNG_Msk (0x1UL << USB_OTG_HPRT_PENCHNG_Pos) /*!< 0x00000008 */ #define USB_OTG_HPRT_PENCHNG USB_OTG_HPRT_PENCHNG_Msk /*!< Port enable/disable change */ -#define USB_OTG_HPRT_POCA_Pos (4U) +#define USB_OTG_HPRT_POCA_Pos (4U) #define USB_OTG_HPRT_POCA_Msk (0x1UL << USB_OTG_HPRT_POCA_Pos) /*!< 0x00000010 */ #define USB_OTG_HPRT_POCA USB_OTG_HPRT_POCA_Msk /*!< Port overcurrent active */ -#define USB_OTG_HPRT_POCCHNG_Pos (5U) +#define USB_OTG_HPRT_POCCHNG_Pos (5U) #define USB_OTG_HPRT_POCCHNG_Msk (0x1UL << USB_OTG_HPRT_POCCHNG_Pos) /*!< 0x00000020 */ #define USB_OTG_HPRT_POCCHNG USB_OTG_HPRT_POCCHNG_Msk /*!< Port overcurrent change */ -#define USB_OTG_HPRT_PRES_Pos (6U) +#define USB_OTG_HPRT_PRES_Pos (6U) #define USB_OTG_HPRT_PRES_Msk (0x1UL << USB_OTG_HPRT_PRES_Pos) /*!< 0x00000040 */ #define USB_OTG_HPRT_PRES USB_OTG_HPRT_PRES_Msk /*!< Port resume */ -#define USB_OTG_HPRT_PSUSP_Pos (7U) +#define USB_OTG_HPRT_PSUSP_Pos (7U) #define USB_OTG_HPRT_PSUSP_Msk (0x1UL << USB_OTG_HPRT_PSUSP_Pos) /*!< 0x00000080 */ #define USB_OTG_HPRT_PSUSP USB_OTG_HPRT_PSUSP_Msk /*!< Port suspend */ -#define USB_OTG_HPRT_PRST_Pos (8U) +#define USB_OTG_HPRT_PRST_Pos (8U) #define USB_OTG_HPRT_PRST_Msk (0x1UL << USB_OTG_HPRT_PRST_Pos) /*!< 0x00000100 */ #define USB_OTG_HPRT_PRST USB_OTG_HPRT_PRST_Msk /*!< Port reset */ -#define USB_OTG_HPRT_PLSTS_Pos (10U) +#define USB_OTG_HPRT_PLSTS_Pos (10U) #define USB_OTG_HPRT_PLSTS_Msk (0x3UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000C00 */ #define USB_OTG_HPRT_PLSTS USB_OTG_HPRT_PLSTS_Msk /*!< Port line status */ #define USB_OTG_HPRT_PLSTS_0 (0x1UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000400 */ #define USB_OTG_HPRT_PLSTS_1 (0x2UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000800 */ -#define USB_OTG_HPRT_PPWR_Pos (12U) +#define USB_OTG_HPRT_PPWR_Pos (12U) #define USB_OTG_HPRT_PPWR_Msk (0x1UL << USB_OTG_HPRT_PPWR_Pos) /*!< 0x00001000 */ #define USB_OTG_HPRT_PPWR USB_OTG_HPRT_PPWR_Msk /*!< Port power */ -#define USB_OTG_HPRT_PTCTL_Pos (13U) +#define USB_OTG_HPRT_PTCTL_Pos (13U) #define USB_OTG_HPRT_PTCTL_Msk (0xFUL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x0001E000 */ #define USB_OTG_HPRT_PTCTL USB_OTG_HPRT_PTCTL_Msk /*!< Port test control */ #define USB_OTG_HPRT_PTCTL_0 (0x1UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00002000 */ @@ -972,136 +972,136 @@ typedef struct #define USB_OTG_HPRT_PTCTL_2 (0x4UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00008000 */ #define USB_OTG_HPRT_PTCTL_3 (0x8UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00010000 */ -#define USB_OTG_HPRT_PSPD_Pos (17U) +#define USB_OTG_HPRT_PSPD_Pos (17U) #define USB_OTG_HPRT_PSPD_Msk (0x3UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00060000 */ #define USB_OTG_HPRT_PSPD USB_OTG_HPRT_PSPD_Msk /*!< Port speed */ #define USB_OTG_HPRT_PSPD_0 (0x1UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00020000 */ #define USB_OTG_HPRT_PSPD_1 (0x2UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00040000 */ /******************** Bit definition for USB_OTG_DOEPEACHMSK1 register ********************/ -#define USB_OTG_DOEPEACHMSK1_XFRCM_Pos (0U) +#define USB_OTG_DOEPEACHMSK1_XFRCM_Pos (0U) #define USB_OTG_DOEPEACHMSK1_XFRCM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_DOEPEACHMSK1_XFRCM USB_OTG_DOEPEACHMSK1_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_EPDM_Pos (1U) +#define USB_OTG_DOEPEACHMSK1_EPDM_Pos (1U) #define USB_OTG_DOEPEACHMSK1_EPDM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_EPDM_Pos) /*!< 0x00000002 */ #define USB_OTG_DOEPEACHMSK1_EPDM USB_OTG_DOEPEACHMSK1_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_TOM_Pos (3U) +#define USB_OTG_DOEPEACHMSK1_TOM_Pos (3U) #define USB_OTG_DOEPEACHMSK1_TOM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_TOM_Pos) /*!< 0x00000008 */ #define USB_OTG_DOEPEACHMSK1_TOM USB_OTG_DOEPEACHMSK1_TOM_Msk /*!< Timeout condition mask */ -#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos (4U) +#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos (4U) #define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos) /*!< 0x00000010 */ #define USB_OTG_DOEPEACHMSK1_ITTXFEMSK USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */ -#define USB_OTG_DOEPEACHMSK1_INEPNMM_Pos (5U) +#define USB_OTG_DOEPEACHMSK1_INEPNMM_Pos (5U) #define USB_OTG_DOEPEACHMSK1_INEPNMM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_INEPNMM_Pos) /*!< 0x00000020 */ #define USB_OTG_DOEPEACHMSK1_INEPNMM USB_OTG_DOEPEACHMSK1_INEPNMM_Msk /*!< IN token received with EP mismatch mask */ -#define USB_OTG_DOEPEACHMSK1_INEPNEM_Pos (6U) +#define USB_OTG_DOEPEACHMSK1_INEPNEM_Pos (6U) #define USB_OTG_DOEPEACHMSK1_INEPNEM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_INEPNEM_Pos) /*!< 0x00000040 */ #define USB_OTG_DOEPEACHMSK1_INEPNEM USB_OTG_DOEPEACHMSK1_INEPNEM_Msk /*!< IN endpoint NAK effective mask */ -#define USB_OTG_DOEPEACHMSK1_TXFURM_Pos (8U) +#define USB_OTG_DOEPEACHMSK1_TXFURM_Pos (8U) #define USB_OTG_DOEPEACHMSK1_TXFURM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_TXFURM_Pos) /*!< 0x00000100 */ #define USB_OTG_DOEPEACHMSK1_TXFURM USB_OTG_DOEPEACHMSK1_TXFURM_Msk /*!< OUT packet error mask */ -#define USB_OTG_DOEPEACHMSK1_BIM_Pos (9U) +#define USB_OTG_DOEPEACHMSK1_BIM_Pos (9U) #define USB_OTG_DOEPEACHMSK1_BIM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_BIM_Pos) /*!< 0x00000200 */ #define USB_OTG_DOEPEACHMSK1_BIM USB_OTG_DOEPEACHMSK1_BIM_Msk /*!< BNA interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_BERRM_Pos (12U) +#define USB_OTG_DOEPEACHMSK1_BERRM_Pos (12U) #define USB_OTG_DOEPEACHMSK1_BERRM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_BERRM_Pos) /*!< 0x00001000 */ #define USB_OTG_DOEPEACHMSK1_BERRM USB_OTG_DOEPEACHMSK1_BERRM_Msk /*!< Bubble error interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_NAKM_Pos (13U) +#define USB_OTG_DOEPEACHMSK1_NAKM_Pos (13U) #define USB_OTG_DOEPEACHMSK1_NAKM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_NAKM_Pos) /*!< 0x00002000 */ #define USB_OTG_DOEPEACHMSK1_NAKM USB_OTG_DOEPEACHMSK1_NAKM_Msk /*!< NAK interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_NYETM_Pos (14U) +#define USB_OTG_DOEPEACHMSK1_NYETM_Pos (14U) #define USB_OTG_DOEPEACHMSK1_NYETM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_NYETM_Pos) /*!< 0x00004000 */ #define USB_OTG_DOEPEACHMSK1_NYETM USB_OTG_DOEPEACHMSK1_NYETM_Msk /*!< NYET interrupt mask */ /******************** Bit definition for USB_OTG_HPTXFSIZ register ********************/ -#define USB_OTG_HPTXFSIZ_PTXSA_Pos (0U) +#define USB_OTG_HPTXFSIZ_PTXSA_Pos (0U) #define USB_OTG_HPTXFSIZ_PTXSA_Msk (0xFFFFUL << USB_OTG_HPTXFSIZ_PTXSA_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HPTXFSIZ_PTXSA USB_OTG_HPTXFSIZ_PTXSA_Msk /*!< Host periodic TxFIFO start address */ -#define USB_OTG_HPTXFSIZ_PTXFD_Pos (16U) +#define USB_OTG_HPTXFSIZ_PTXFD_Pos (16U) #define USB_OTG_HPTXFSIZ_PTXFD_Msk (0xFFFFUL << USB_OTG_HPTXFSIZ_PTXFD_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_HPTXFSIZ_PTXFD USB_OTG_HPTXFSIZ_PTXFD_Msk /*!< Host periodic TxFIFO depth */ /******************** Bit definition for USB_OTG_DIEPCTL register ********************/ -#define USB_OTG_DIEPCTL_MPSIZ_Pos (0U) +#define USB_OTG_DIEPCTL_MPSIZ_Pos (0U) #define USB_OTG_DIEPCTL_MPSIZ_Msk (0x7FFUL << USB_OTG_DIEPCTL_MPSIZ_Pos) /*!< 0x000007FF */ #define USB_OTG_DIEPCTL_MPSIZ USB_OTG_DIEPCTL_MPSIZ_Msk /*!< Maximum packet size */ -#define USB_OTG_DIEPCTL_USBAEP_Pos (15U) +#define USB_OTG_DIEPCTL_USBAEP_Pos (15U) #define USB_OTG_DIEPCTL_USBAEP_Msk (0x1UL << USB_OTG_DIEPCTL_USBAEP_Pos) /*!< 0x00008000 */ #define USB_OTG_DIEPCTL_USBAEP USB_OTG_DIEPCTL_USBAEP_Msk /*!< USB active endpoint */ -#define USB_OTG_DIEPCTL_EONUM_DPID_Pos (16U) +#define USB_OTG_DIEPCTL_EONUM_DPID_Pos (16U) #define USB_OTG_DIEPCTL_EONUM_DPID_Msk (0x1UL << USB_OTG_DIEPCTL_EONUM_DPID_Pos) /*!< 0x00010000 */ #define USB_OTG_DIEPCTL_EONUM_DPID USB_OTG_DIEPCTL_EONUM_DPID_Msk /*!< Even/odd frame */ -#define USB_OTG_DIEPCTL_NAKSTS_Pos (17U) +#define USB_OTG_DIEPCTL_NAKSTS_Pos (17U) #define USB_OTG_DIEPCTL_NAKSTS_Msk (0x1UL << USB_OTG_DIEPCTL_NAKSTS_Pos) /*!< 0x00020000 */ #define USB_OTG_DIEPCTL_NAKSTS USB_OTG_DIEPCTL_NAKSTS_Msk /*!< NAK status */ -#define USB_OTG_DIEPCTL_EPTYP_Pos (18U) +#define USB_OTG_DIEPCTL_EPTYP_Pos (18U) #define USB_OTG_DIEPCTL_EPTYP_Msk (0x3UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x000C0000 */ #define USB_OTG_DIEPCTL_EPTYP USB_OTG_DIEPCTL_EPTYP_Msk /*!< Endpoint type */ #define USB_OTG_DIEPCTL_EPTYP_0 (0x1UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x00040000 */ #define USB_OTG_DIEPCTL_EPTYP_1 (0x2UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x00080000 */ -#define USB_OTG_DIEPCTL_STALL_Pos (21U) +#define USB_OTG_DIEPCTL_STALL_Pos (21U) #define USB_OTG_DIEPCTL_STALL_Msk (0x1UL << USB_OTG_DIEPCTL_STALL_Pos) /*!< 0x00200000 */ #define USB_OTG_DIEPCTL_STALL USB_OTG_DIEPCTL_STALL_Msk /*!< STALL handshake */ -#define USB_OTG_DIEPCTL_TXFNUM_Pos (22U) +#define USB_OTG_DIEPCTL_TXFNUM_Pos (22U) #define USB_OTG_DIEPCTL_TXFNUM_Msk (0xFUL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x03C00000 */ #define USB_OTG_DIEPCTL_TXFNUM USB_OTG_DIEPCTL_TXFNUM_Msk /*!< TxFIFO number */ #define USB_OTG_DIEPCTL_TXFNUM_0 (0x1UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x00400000 */ #define USB_OTG_DIEPCTL_TXFNUM_1 (0x2UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x00800000 */ #define USB_OTG_DIEPCTL_TXFNUM_2 (0x4UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x01000000 */ #define USB_OTG_DIEPCTL_TXFNUM_3 (0x8UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x02000000 */ -#define USB_OTG_DIEPCTL_CNAK_Pos (26U) +#define USB_OTG_DIEPCTL_CNAK_Pos (26U) #define USB_OTG_DIEPCTL_CNAK_Msk (0x1UL << USB_OTG_DIEPCTL_CNAK_Pos) /*!< 0x04000000 */ #define USB_OTG_DIEPCTL_CNAK USB_OTG_DIEPCTL_CNAK_Msk /*!< Clear NAK */ -#define USB_OTG_DIEPCTL_SNAK_Pos (27U) +#define USB_OTG_DIEPCTL_SNAK_Pos (27U) #define USB_OTG_DIEPCTL_SNAK_Msk (0x1UL << USB_OTG_DIEPCTL_SNAK_Pos) /*!< 0x08000000 */ #define USB_OTG_DIEPCTL_SNAK USB_OTG_DIEPCTL_SNAK_Msk /*!< Set NAK */ -#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos (28U) +#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos (28U) #define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk (0x1UL << USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos) /*!< 0x10000000 */ #define USB_OTG_DIEPCTL_SD0PID_SEVNFRM USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk /*!< Set DATA0 PID */ -#define USB_OTG_DIEPCTL_SODDFRM_Pos (29U) +#define USB_OTG_DIEPCTL_SODDFRM_Pos (29U) #define USB_OTG_DIEPCTL_SODDFRM_Msk (0x1UL << USB_OTG_DIEPCTL_SODDFRM_Pos) /*!< 0x20000000 */ #define USB_OTG_DIEPCTL_SODDFRM USB_OTG_DIEPCTL_SODDFRM_Msk /*!< Set odd frame */ -#define USB_OTG_DIEPCTL_EPDIS_Pos (30U) +#define USB_OTG_DIEPCTL_EPDIS_Pos (30U) #define USB_OTG_DIEPCTL_EPDIS_Msk (0x1UL << USB_OTG_DIEPCTL_EPDIS_Pos) /*!< 0x40000000 */ #define USB_OTG_DIEPCTL_EPDIS USB_OTG_DIEPCTL_EPDIS_Msk /*!< Endpoint disable */ -#define USB_OTG_DIEPCTL_EPENA_Pos (31U) +#define USB_OTG_DIEPCTL_EPENA_Pos (31U) #define USB_OTG_DIEPCTL_EPENA_Msk (0x1UL << USB_OTG_DIEPCTL_EPENA_Pos) /*!< 0x80000000 */ #define USB_OTG_DIEPCTL_EPENA USB_OTG_DIEPCTL_EPENA_Msk /*!< Endpoint enable */ /******************** Bit definition for USB_OTG_HCCHAR register ********************/ -#define USB_OTG_HCCHAR_MPSIZ_Pos (0U) +#define USB_OTG_HCCHAR_MPSIZ_Pos (0U) #define USB_OTG_HCCHAR_MPSIZ_Msk (0x7FFUL << USB_OTG_HCCHAR_MPSIZ_Pos) /*!< 0x000007FF */ #define USB_OTG_HCCHAR_MPSIZ USB_OTG_HCCHAR_MPSIZ_Msk /*!< Maximum packet size */ -#define USB_OTG_HCCHAR_EPNUM_Pos (11U) +#define USB_OTG_HCCHAR_EPNUM_Pos (11U) #define USB_OTG_HCCHAR_EPNUM_Msk (0xFUL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00007800 */ #define USB_OTG_HCCHAR_EPNUM USB_OTG_HCCHAR_EPNUM_Msk /*!< Endpoint number */ #define USB_OTG_HCCHAR_EPNUM_0 (0x1UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00000800 */ #define USB_OTG_HCCHAR_EPNUM_1 (0x2UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00001000 */ #define USB_OTG_HCCHAR_EPNUM_2 (0x4UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00002000 */ #define USB_OTG_HCCHAR_EPNUM_3 (0x8UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00004000 */ -#define USB_OTG_HCCHAR_EPDIR_Pos (15U) +#define USB_OTG_HCCHAR_EPDIR_Pos (15U) #define USB_OTG_HCCHAR_EPDIR_Msk (0x1UL << USB_OTG_HCCHAR_EPDIR_Pos) /*!< 0x00008000 */ #define USB_OTG_HCCHAR_EPDIR USB_OTG_HCCHAR_EPDIR_Msk /*!< Endpoint direction */ -#define USB_OTG_HCCHAR_LSDEV_Pos (17U) +#define USB_OTG_HCCHAR_LSDEV_Pos (17U) #define USB_OTG_HCCHAR_LSDEV_Msk (0x1UL << USB_OTG_HCCHAR_LSDEV_Pos) /*!< 0x00020000 */ #define USB_OTG_HCCHAR_LSDEV USB_OTG_HCCHAR_LSDEV_Msk /*!< Low-speed device */ -#define USB_OTG_HCCHAR_EPTYP_Pos (18U) +#define USB_OTG_HCCHAR_EPTYP_Pos (18U) #define USB_OTG_HCCHAR_EPTYP_Msk (0x3UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x000C0000 */ #define USB_OTG_HCCHAR_EPTYP USB_OTG_HCCHAR_EPTYP_Msk /*!< Endpoint type */ #define USB_OTG_HCCHAR_EPTYP_0 (0x1UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x00040000 */ #define USB_OTG_HCCHAR_EPTYP_1 (0x2UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x00080000 */ - -#define USB_OTG_HCCHAR_MC_Pos (20U) + +#define USB_OTG_HCCHAR_MC_Pos (20U) #define USB_OTG_HCCHAR_MC_Msk (0x3UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00300000 */ #define USB_OTG_HCCHAR_MC USB_OTG_HCCHAR_MC_Msk /*!< Multi Count (MC) / Error Count (EC) */ #define USB_OTG_HCCHAR_MC_0 (0x1UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00100000 */ #define USB_OTG_HCCHAR_MC_1 (0x2UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00200000 */ -#define USB_OTG_HCCHAR_DAD_Pos (22U) +#define USB_OTG_HCCHAR_DAD_Pos (22U) #define USB_OTG_HCCHAR_DAD_Msk (0x7FUL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x1FC00000 */ #define USB_OTG_HCCHAR_DAD USB_OTG_HCCHAR_DAD_Msk /*!< Device address */ #define USB_OTG_HCCHAR_DAD_0 (0x01UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x00400000 */ @@ -1111,19 +1111,19 @@ typedef struct #define USB_OTG_HCCHAR_DAD_4 (0x10UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x04000000 */ #define USB_OTG_HCCHAR_DAD_5 (0x20UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x08000000 */ #define USB_OTG_HCCHAR_DAD_6 (0x40UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x10000000 */ -#define USB_OTG_HCCHAR_ODDFRM_Pos (29U) +#define USB_OTG_HCCHAR_ODDFRM_Pos (29U) #define USB_OTG_HCCHAR_ODDFRM_Msk (0x1UL << USB_OTG_HCCHAR_ODDFRM_Pos) /*!< 0x20000000 */ #define USB_OTG_HCCHAR_ODDFRM USB_OTG_HCCHAR_ODDFRM_Msk /*!< Odd frame */ -#define USB_OTG_HCCHAR_CHDIS_Pos (30U) +#define USB_OTG_HCCHAR_CHDIS_Pos (30U) #define USB_OTG_HCCHAR_CHDIS_Msk (0x1UL << USB_OTG_HCCHAR_CHDIS_Pos) /*!< 0x40000000 */ #define USB_OTG_HCCHAR_CHDIS USB_OTG_HCCHAR_CHDIS_Msk /*!< Channel disable */ -#define USB_OTG_HCCHAR_CHENA_Pos (31U) +#define USB_OTG_HCCHAR_CHENA_Pos (31U) #define USB_OTG_HCCHAR_CHENA_Msk (0x1UL << USB_OTG_HCCHAR_CHENA_Pos) /*!< 0x80000000 */ #define USB_OTG_HCCHAR_CHENA USB_OTG_HCCHAR_CHENA_Msk /*!< Channel enable */ /******************** Bit definition for USB_OTG_HCSPLT register ********************/ -#define USB_OTG_HCSPLT_PRTADDR_Pos (0U) +#define USB_OTG_HCSPLT_PRTADDR_Pos (0U) #define USB_OTG_HCSPLT_PRTADDR_Msk (0x7FUL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x0000007F */ #define USB_OTG_HCSPLT_PRTADDR USB_OTG_HCSPLT_PRTADDR_Msk /*!< Port address */ #define USB_OTG_HCSPLT_PRTADDR_0 (0x01UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000001 */ @@ -1134,7 +1134,7 @@ typedef struct #define USB_OTG_HCSPLT_PRTADDR_5 (0x20UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000020 */ #define USB_OTG_HCSPLT_PRTADDR_6 (0x40UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000040 */ -#define USB_OTG_HCSPLT_HUBADDR_Pos (7U) +#define USB_OTG_HCSPLT_HUBADDR_Pos (7U) #define USB_OTG_HCSPLT_HUBADDR_Msk (0x7FUL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00003F80 */ #define USB_OTG_HCSPLT_HUBADDR USB_OTG_HCSPLT_HUBADDR_Msk /*!< Hub address */ #define USB_OTG_HCSPLT_HUBADDR_0 (0x01UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000080 */ @@ -1145,240 +1145,240 @@ typedef struct #define USB_OTG_HCSPLT_HUBADDR_5 (0x20UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00001000 */ #define USB_OTG_HCSPLT_HUBADDR_6 (0x40UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00002000 */ -#define USB_OTG_HCSPLT_XACTPOS_Pos (14U) +#define USB_OTG_HCSPLT_XACTPOS_Pos (14U) #define USB_OTG_HCSPLT_XACTPOS_Msk (0x3UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x0000C000 */ #define USB_OTG_HCSPLT_XACTPOS USB_OTG_HCSPLT_XACTPOS_Msk /*!< XACTPOS */ #define USB_OTG_HCSPLT_XACTPOS_0 (0x1UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x00004000 */ #define USB_OTG_HCSPLT_XACTPOS_1 (0x2UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x00008000 */ -#define USB_OTG_HCSPLT_COMPLSPLT_Pos (16U) +#define USB_OTG_HCSPLT_COMPLSPLT_Pos (16U) #define USB_OTG_HCSPLT_COMPLSPLT_Msk (0x1UL << USB_OTG_HCSPLT_COMPLSPLT_Pos) /*!< 0x00010000 */ #define USB_OTG_HCSPLT_COMPLSPLT USB_OTG_HCSPLT_COMPLSPLT_Msk /*!< Do complete split */ -#define USB_OTG_HCSPLT_SPLITEN_Pos (31U) +#define USB_OTG_HCSPLT_SPLITEN_Pos (31U) #define USB_OTG_HCSPLT_SPLITEN_Msk (0x1UL << USB_OTG_HCSPLT_SPLITEN_Pos) /*!< 0x80000000 */ #define USB_OTG_HCSPLT_SPLITEN USB_OTG_HCSPLT_SPLITEN_Msk /*!< Split enable */ /******************** Bit definition for USB_OTG_HCINT register ********************/ -#define USB_OTG_HCINT_XFRC_Pos (0U) +#define USB_OTG_HCINT_XFRC_Pos (0U) #define USB_OTG_HCINT_XFRC_Msk (0x1UL << USB_OTG_HCINT_XFRC_Pos) /*!< 0x00000001 */ #define USB_OTG_HCINT_XFRC USB_OTG_HCINT_XFRC_Msk /*!< Transfer completed */ -#define USB_OTG_HCINT_CHH_Pos (1U) +#define USB_OTG_HCINT_CHH_Pos (1U) #define USB_OTG_HCINT_CHH_Msk (0x1UL << USB_OTG_HCINT_CHH_Pos) /*!< 0x00000002 */ #define USB_OTG_HCINT_CHH USB_OTG_HCINT_CHH_Msk /*!< Channel halted */ -#define USB_OTG_HCINT_AHBERR_Pos (2U) +#define USB_OTG_HCINT_AHBERR_Pos (2U) #define USB_OTG_HCINT_AHBERR_Msk (0x1UL << USB_OTG_HCINT_AHBERR_Pos) /*!< 0x00000004 */ #define USB_OTG_HCINT_AHBERR USB_OTG_HCINT_AHBERR_Msk /*!< AHB error */ -#define USB_OTG_HCINT_STALL_Pos (3U) +#define USB_OTG_HCINT_STALL_Pos (3U) #define USB_OTG_HCINT_STALL_Msk (0x1UL << USB_OTG_HCINT_STALL_Pos) /*!< 0x00000008 */ #define USB_OTG_HCINT_STALL USB_OTG_HCINT_STALL_Msk /*!< STALL response received interrupt */ -#define USB_OTG_HCINT_NAK_Pos (4U) +#define USB_OTG_HCINT_NAK_Pos (4U) #define USB_OTG_HCINT_NAK_Msk (0x1UL << USB_OTG_HCINT_NAK_Pos) /*!< 0x00000010 */ #define USB_OTG_HCINT_NAK USB_OTG_HCINT_NAK_Msk /*!< NAK response received interrupt */ -#define USB_OTG_HCINT_ACK_Pos (5U) +#define USB_OTG_HCINT_ACK_Pos (5U) #define USB_OTG_HCINT_ACK_Msk (0x1UL << USB_OTG_HCINT_ACK_Pos) /*!< 0x00000020 */ #define USB_OTG_HCINT_ACK USB_OTG_HCINT_ACK_Msk /*!< ACK response received/transmitted interrupt */ -#define USB_OTG_HCINT_NYET_Pos (6U) +#define USB_OTG_HCINT_NYET_Pos (6U) #define USB_OTG_HCINT_NYET_Msk (0x1UL << USB_OTG_HCINT_NYET_Pos) /*!< 0x00000040 */ #define USB_OTG_HCINT_NYET USB_OTG_HCINT_NYET_Msk /*!< Response received interrupt */ -#define USB_OTG_HCINT_TXERR_Pos (7U) +#define USB_OTG_HCINT_TXERR_Pos (7U) #define USB_OTG_HCINT_TXERR_Msk (0x1UL << USB_OTG_HCINT_TXERR_Pos) /*!< 0x00000080 */ #define USB_OTG_HCINT_TXERR USB_OTG_HCINT_TXERR_Msk /*!< Transaction error */ -#define USB_OTG_HCINT_BBERR_Pos (8U) +#define USB_OTG_HCINT_BBERR_Pos (8U) #define USB_OTG_HCINT_BBERR_Msk (0x1UL << USB_OTG_HCINT_BBERR_Pos) /*!< 0x00000100 */ #define USB_OTG_HCINT_BBERR USB_OTG_HCINT_BBERR_Msk /*!< Babble error */ -#define USB_OTG_HCINT_FRMOR_Pos (9U) +#define USB_OTG_HCINT_FRMOR_Pos (9U) #define USB_OTG_HCINT_FRMOR_Msk (0x1UL << USB_OTG_HCINT_FRMOR_Pos) /*!< 0x00000200 */ #define USB_OTG_HCINT_FRMOR USB_OTG_HCINT_FRMOR_Msk /*!< Frame overrun */ -#define USB_OTG_HCINT_DTERR_Pos (10U) +#define USB_OTG_HCINT_DTERR_Pos (10U) #define USB_OTG_HCINT_DTERR_Msk (0x1UL << USB_OTG_HCINT_DTERR_Pos) /*!< 0x00000400 */ #define USB_OTG_HCINT_DTERR USB_OTG_HCINT_DTERR_Msk /*!< Data toggle error */ /******************** Bit definition for USB_OTG_DIEPINT register ********************/ -#define USB_OTG_DIEPINT_XFRC_Pos (0U) +#define USB_OTG_DIEPINT_XFRC_Pos (0U) #define USB_OTG_DIEPINT_XFRC_Msk (0x1UL << USB_OTG_DIEPINT_XFRC_Pos) /*!< 0x00000001 */ #define USB_OTG_DIEPINT_XFRC USB_OTG_DIEPINT_XFRC_Msk /*!< Transfer completed interrupt */ -#define USB_OTG_DIEPINT_EPDISD_Pos (1U) +#define USB_OTG_DIEPINT_EPDISD_Pos (1U) #define USB_OTG_DIEPINT_EPDISD_Msk (0x1UL << USB_OTG_DIEPINT_EPDISD_Pos) /*!< 0x00000002 */ #define USB_OTG_DIEPINT_EPDISD USB_OTG_DIEPINT_EPDISD_Msk /*!< Endpoint disabled interrupt */ #define USB_OTG_DIEPINT_AHBERR_Pos (2U) #define USB_OTG_DIEPINT_AHBERR_Msk (0x1UL << USB_OTG_DIEPINT_AHBERR_Pos) /*!< 0x00000004 */ #define USB_OTG_DIEPINT_AHBERR USB_OTG_DIEPINT_AHBERR_Msk /*!< AHB Error (AHBErr) during an IN transaction */ -#define USB_OTG_DIEPINT_TOC_Pos (3U) +#define USB_OTG_DIEPINT_TOC_Pos (3U) #define USB_OTG_DIEPINT_TOC_Msk (0x1UL << USB_OTG_DIEPINT_TOC_Pos) /*!< 0x00000008 */ #define USB_OTG_DIEPINT_TOC USB_OTG_DIEPINT_TOC_Msk /*!< Timeout condition */ -#define USB_OTG_DIEPINT_ITTXFE_Pos (4U) +#define USB_OTG_DIEPINT_ITTXFE_Pos (4U) #define USB_OTG_DIEPINT_ITTXFE_Msk (0x1UL << USB_OTG_DIEPINT_ITTXFE_Pos) /*!< 0x00000010 */ #define USB_OTG_DIEPINT_ITTXFE USB_OTG_DIEPINT_ITTXFE_Msk /*!< IN token received when TxFIFO is empty */ #define USB_OTG_DIEPINT_INEPNM_Pos (5U) #define USB_OTG_DIEPINT_INEPNM_Msk (0x1UL << USB_OTG_DIEPINT_INEPNM_Pos) /*!< 0x00000004 */ #define USB_OTG_DIEPINT_INEPNM USB_OTG_DIEPINT_INEPNM_Msk /*!< IN token received with EP mismatch */ -#define USB_OTG_DIEPINT_INEPNE_Pos (6U) +#define USB_OTG_DIEPINT_INEPNE_Pos (6U) #define USB_OTG_DIEPINT_INEPNE_Msk (0x1UL << USB_OTG_DIEPINT_INEPNE_Pos) /*!< 0x00000040 */ #define USB_OTG_DIEPINT_INEPNE USB_OTG_DIEPINT_INEPNE_Msk /*!< IN endpoint NAK effective */ -#define USB_OTG_DIEPINT_TXFE_Pos (7U) +#define USB_OTG_DIEPINT_TXFE_Pos (7U) #define USB_OTG_DIEPINT_TXFE_Msk (0x1UL << USB_OTG_DIEPINT_TXFE_Pos) /*!< 0x00000080 */ #define USB_OTG_DIEPINT_TXFE USB_OTG_DIEPINT_TXFE_Msk /*!< Transmit FIFO empty */ -#define USB_OTG_DIEPINT_TXFIFOUDRN_Pos (8U) +#define USB_OTG_DIEPINT_TXFIFOUDRN_Pos (8U) #define USB_OTG_DIEPINT_TXFIFOUDRN_Msk (0x1UL << USB_OTG_DIEPINT_TXFIFOUDRN_Pos) /*!< 0x00000100 */ #define USB_OTG_DIEPINT_TXFIFOUDRN USB_OTG_DIEPINT_TXFIFOUDRN_Msk /*!< Transmit Fifo Underrun */ -#define USB_OTG_DIEPINT_BNA_Pos (9U) +#define USB_OTG_DIEPINT_BNA_Pos (9U) #define USB_OTG_DIEPINT_BNA_Msk (0x1UL << USB_OTG_DIEPINT_BNA_Pos) /*!< 0x00000200 */ #define USB_OTG_DIEPINT_BNA USB_OTG_DIEPINT_BNA_Msk /*!< Buffer not available interrupt */ -#define USB_OTG_DIEPINT_PKTDRPSTS_Pos (11U) +#define USB_OTG_DIEPINT_PKTDRPSTS_Pos (11U) #define USB_OTG_DIEPINT_PKTDRPSTS_Msk (0x1UL << USB_OTG_DIEPINT_PKTDRPSTS_Pos) /*!< 0x00000800 */ #define USB_OTG_DIEPINT_PKTDRPSTS USB_OTG_DIEPINT_PKTDRPSTS_Msk /*!< Packet dropped status */ -#define USB_OTG_DIEPINT_BERR_Pos (12U) +#define USB_OTG_DIEPINT_BERR_Pos (12U) #define USB_OTG_DIEPINT_BERR_Msk (0x1UL << USB_OTG_DIEPINT_BERR_Pos) /*!< 0x00001000 */ #define USB_OTG_DIEPINT_BERR USB_OTG_DIEPINT_BERR_Msk /*!< Babble error interrupt */ -#define USB_OTG_DIEPINT_NAK_Pos (13U) +#define USB_OTG_DIEPINT_NAK_Pos (13U) #define USB_OTG_DIEPINT_NAK_Msk (0x1UL << USB_OTG_DIEPINT_NAK_Pos) /*!< 0x00002000 */ #define USB_OTG_DIEPINT_NAK USB_OTG_DIEPINT_NAK_Msk /*!< NAK interrupt */ /******************** Bit definition for USB_OTG_HCINTMSK register ********************/ -#define USB_OTG_HCINTMSK_XFRCM_Pos (0U) +#define USB_OTG_HCINTMSK_XFRCM_Pos (0U) #define USB_OTG_HCINTMSK_XFRCM_Msk (0x1UL << USB_OTG_HCINTMSK_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_HCINTMSK_XFRCM USB_OTG_HCINTMSK_XFRCM_Msk /*!< Transfer completed mask */ -#define USB_OTG_HCINTMSK_CHHM_Pos (1U) +#define USB_OTG_HCINTMSK_CHHM_Pos (1U) #define USB_OTG_HCINTMSK_CHHM_Msk (0x1UL << USB_OTG_HCINTMSK_CHHM_Pos) /*!< 0x00000002 */ #define USB_OTG_HCINTMSK_CHHM USB_OTG_HCINTMSK_CHHM_Msk /*!< Channel halted mask */ -#define USB_OTG_HCINTMSK_AHBERR_Pos (2U) +#define USB_OTG_HCINTMSK_AHBERR_Pos (2U) #define USB_OTG_HCINTMSK_AHBERR_Msk (0x1UL << USB_OTG_HCINTMSK_AHBERR_Pos) /*!< 0x00000004 */ #define USB_OTG_HCINTMSK_AHBERR USB_OTG_HCINTMSK_AHBERR_Msk /*!< AHB error */ -#define USB_OTG_HCINTMSK_STALLM_Pos (3U) +#define USB_OTG_HCINTMSK_STALLM_Pos (3U) #define USB_OTG_HCINTMSK_STALLM_Msk (0x1UL << USB_OTG_HCINTMSK_STALLM_Pos) /*!< 0x00000008 */ #define USB_OTG_HCINTMSK_STALLM USB_OTG_HCINTMSK_STALLM_Msk /*!< STALL response received interrupt mask */ -#define USB_OTG_HCINTMSK_NAKM_Pos (4U) +#define USB_OTG_HCINTMSK_NAKM_Pos (4U) #define USB_OTG_HCINTMSK_NAKM_Msk (0x1UL << USB_OTG_HCINTMSK_NAKM_Pos) /*!< 0x00000010 */ #define USB_OTG_HCINTMSK_NAKM USB_OTG_HCINTMSK_NAKM_Msk /*!< NAK response received interrupt mask */ -#define USB_OTG_HCINTMSK_ACKM_Pos (5U) +#define USB_OTG_HCINTMSK_ACKM_Pos (5U) #define USB_OTG_HCINTMSK_ACKM_Msk (0x1UL << USB_OTG_HCINTMSK_ACKM_Pos) /*!< 0x00000020 */ #define USB_OTG_HCINTMSK_ACKM USB_OTG_HCINTMSK_ACKM_Msk /*!< ACK response received/transmitted interrupt mask */ -#define USB_OTG_HCINTMSK_NYET_Pos (6U) +#define USB_OTG_HCINTMSK_NYET_Pos (6U) #define USB_OTG_HCINTMSK_NYET_Msk (0x1UL << USB_OTG_HCINTMSK_NYET_Pos) /*!< 0x00000040 */ #define USB_OTG_HCINTMSK_NYET USB_OTG_HCINTMSK_NYET_Msk /*!< response received interrupt mask */ -#define USB_OTG_HCINTMSK_TXERRM_Pos (7U) +#define USB_OTG_HCINTMSK_TXERRM_Pos (7U) #define USB_OTG_HCINTMSK_TXERRM_Msk (0x1UL << USB_OTG_HCINTMSK_TXERRM_Pos) /*!< 0x00000080 */ #define USB_OTG_HCINTMSK_TXERRM USB_OTG_HCINTMSK_TXERRM_Msk /*!< Transaction error mask */ -#define USB_OTG_HCINTMSK_BBERRM_Pos (8U) +#define USB_OTG_HCINTMSK_BBERRM_Pos (8U) #define USB_OTG_HCINTMSK_BBERRM_Msk (0x1UL << USB_OTG_HCINTMSK_BBERRM_Pos) /*!< 0x00000100 */ #define USB_OTG_HCINTMSK_BBERRM USB_OTG_HCINTMSK_BBERRM_Msk /*!< Babble error mask */ -#define USB_OTG_HCINTMSK_FRMORM_Pos (9U) +#define USB_OTG_HCINTMSK_FRMORM_Pos (9U) #define USB_OTG_HCINTMSK_FRMORM_Msk (0x1UL << USB_OTG_HCINTMSK_FRMORM_Pos) /*!< 0x00000200 */ #define USB_OTG_HCINTMSK_FRMORM USB_OTG_HCINTMSK_FRMORM_Msk /*!< Frame overrun mask */ -#define USB_OTG_HCINTMSK_DTERRM_Pos (10U) +#define USB_OTG_HCINTMSK_DTERRM_Pos (10U) #define USB_OTG_HCINTMSK_DTERRM_Msk (0x1UL << USB_OTG_HCINTMSK_DTERRM_Pos) /*!< 0x00000400 */ #define USB_OTG_HCINTMSK_DTERRM USB_OTG_HCINTMSK_DTERRM_Msk /*!< Data toggle error mask */ /******************** Bit definition for USB_OTG_DIEPTSIZ register ********************/ -#define USB_OTG_DIEPTSIZ_XFRSIZ_Pos (0U) +#define USB_OTG_DIEPTSIZ_XFRSIZ_Pos (0U) #define USB_OTG_DIEPTSIZ_XFRSIZ_Msk (0x7FFFFUL << USB_OTG_DIEPTSIZ_XFRSIZ_Pos) /*!< 0x0007FFFF */ #define USB_OTG_DIEPTSIZ_XFRSIZ USB_OTG_DIEPTSIZ_XFRSIZ_Msk /*!< Transfer size */ -#define USB_OTG_DIEPTSIZ_PKTCNT_Pos (19U) +#define USB_OTG_DIEPTSIZ_PKTCNT_Pos (19U) #define USB_OTG_DIEPTSIZ_PKTCNT_Msk (0x3FFUL << USB_OTG_DIEPTSIZ_PKTCNT_Pos) /*!< 0x1FF80000 */ #define USB_OTG_DIEPTSIZ_PKTCNT USB_OTG_DIEPTSIZ_PKTCNT_Msk /*!< Packet count */ -#define USB_OTG_DIEPTSIZ_MULCNT_Pos (29U) +#define USB_OTG_DIEPTSIZ_MULCNT_Pos (29U) #define USB_OTG_DIEPTSIZ_MULCNT_Msk (0x3UL << USB_OTG_DIEPTSIZ_MULCNT_Pos) /*!< 0x60000000 */ #define USB_OTG_DIEPTSIZ_MULCNT USB_OTG_DIEPTSIZ_MULCNT_Msk /*!< Packet count */ /******************** Bit definition for USB_OTG_HCTSIZ register ********************/ -#define USB_OTG_HCTSIZ_XFRSIZ_Pos (0U) +#define USB_OTG_HCTSIZ_XFRSIZ_Pos (0U) #define USB_OTG_HCTSIZ_XFRSIZ_Msk (0x7FFFFUL << USB_OTG_HCTSIZ_XFRSIZ_Pos) /*!< 0x0007FFFF */ #define USB_OTG_HCTSIZ_XFRSIZ USB_OTG_HCTSIZ_XFRSIZ_Msk /*!< Transfer size */ -#define USB_OTG_HCTSIZ_PKTCNT_Pos (19U) +#define USB_OTG_HCTSIZ_PKTCNT_Pos (19U) #define USB_OTG_HCTSIZ_PKTCNT_Msk (0x3FFUL << USB_OTG_HCTSIZ_PKTCNT_Pos) /*!< 0x1FF80000 */ #define USB_OTG_HCTSIZ_PKTCNT USB_OTG_HCTSIZ_PKTCNT_Msk /*!< Packet count */ -#define USB_OTG_HCTSIZ_DOPING_Pos (31U) +#define USB_OTG_HCTSIZ_DOPING_Pos (31U) #define USB_OTG_HCTSIZ_DOPING_Msk (0x1UL << USB_OTG_HCTSIZ_DOPING_Pos) /*!< 0x80000000 */ #define USB_OTG_HCTSIZ_DOPING USB_OTG_HCTSIZ_DOPING_Msk /*!< Do PING */ -#define USB_OTG_HCTSIZ_DPID_Pos (29U) +#define USB_OTG_HCTSIZ_DPID_Pos (29U) #define USB_OTG_HCTSIZ_DPID_Msk (0x3UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x60000000 */ #define USB_OTG_HCTSIZ_DPID USB_OTG_HCTSIZ_DPID_Msk /*!< Data PID */ #define USB_OTG_HCTSIZ_DPID_0 (0x1UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x20000000 */ #define USB_OTG_HCTSIZ_DPID_1 (0x2UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x40000000 */ /******************** Bit definition for USB_OTG_DIEPDMA register ********************/ -#define USB_OTG_DIEPDMA_DMAADDR_Pos (0U) +#define USB_OTG_DIEPDMA_DMAADDR_Pos (0U) #define USB_OTG_DIEPDMA_DMAADDR_Msk (0xFFFFFFFFUL << USB_OTG_DIEPDMA_DMAADDR_Pos) /*!< 0xFFFFFFFF */ #define USB_OTG_DIEPDMA_DMAADDR USB_OTG_DIEPDMA_DMAADDR_Msk /*!< DMA address */ /******************** Bit definition for USB_OTG_HCDMA register ********************/ -#define USB_OTG_HCDMA_DMAADDR_Pos (0U) +#define USB_OTG_HCDMA_DMAADDR_Pos (0U) #define USB_OTG_HCDMA_DMAADDR_Msk (0xFFFFFFFFUL << USB_OTG_HCDMA_DMAADDR_Pos) /*!< 0xFFFFFFFF */ #define USB_OTG_HCDMA_DMAADDR USB_OTG_HCDMA_DMAADDR_Msk /*!< DMA address */ /******************** Bit definition for USB_OTG_DTXFSTS register ********************/ -#define USB_OTG_DTXFSTS_INEPTFSAV_Pos (0U) +#define USB_OTG_DTXFSTS_INEPTFSAV_Pos (0U) #define USB_OTG_DTXFSTS_INEPTFSAV_Msk (0xFFFFUL << USB_OTG_DTXFSTS_INEPTFSAV_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DTXFSTS_INEPTFSAV USB_OTG_DTXFSTS_INEPTFSAV_Msk /*!< IN endpoint TxFIFO space available */ /******************** Bit definition for USB_OTG_DIEPTXF register ********************/ -#define USB_OTG_DIEPTXF_INEPTXSA_Pos (0U) +#define USB_OTG_DIEPTXF_INEPTXSA_Pos (0U) #define USB_OTG_DIEPTXF_INEPTXSA_Msk (0xFFFFUL << USB_OTG_DIEPTXF_INEPTXSA_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DIEPTXF_INEPTXSA USB_OTG_DIEPTXF_INEPTXSA_Msk /*!< IN endpoint FIFOx transmit RAM start address */ -#define USB_OTG_DIEPTXF_INEPTXFD_Pos (16U) +#define USB_OTG_DIEPTXF_INEPTXFD_Pos (16U) #define USB_OTG_DIEPTXF_INEPTXFD_Msk (0xFFFFUL << USB_OTG_DIEPTXF_INEPTXFD_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_DIEPTXF_INEPTXFD USB_OTG_DIEPTXF_INEPTXFD_Msk /*!< IN endpoint TxFIFO depth */ /******************** Bit definition for USB_OTG_DOEPCTL register ********************/ -#define USB_OTG_DOEPCTL_MPSIZ_Pos (0U) +#define USB_OTG_DOEPCTL_MPSIZ_Pos (0U) #define USB_OTG_DOEPCTL_MPSIZ_Msk (0x7FFUL << USB_OTG_DOEPCTL_MPSIZ_Pos) /*!< 0x000007FF */ #define USB_OTG_DOEPCTL_MPSIZ USB_OTG_DOEPCTL_MPSIZ_Msk /*!< Maximum packet size */ /*!queued_len += short_packet_size; - + EP_TX_DMA_ADDR(epnum) = (uint32_t)buffer; USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << epnum); EP_TX_LEN(epnum) = short_packet_size; @@ -366,7 +366,7 @@ void dcd_int_handler(uint8_t rhport) { } else if (intflag & USBHS_SETUP_FLAG) { USBHS_Dev_Endp0_Tog = 1; dcd_event_setup_received(0, EP0_DatabufHD, true); - + USBHSD->INT_FG = USBHS_SETUP_FLAG; /* Clear flag */ } else if (intflag & USBHS_DETECT_FLAG) { USBHS_Dev_Endp0_Tog = 1; diff --git a/test/fuzz/dcd_fuzz.cc b/test/fuzz/dcd_fuzz.cc index 6403015dd..06ddddc4a 100644 --- a/test/fuzz/dcd_fuzz.cc +++ b/test/fuzz/dcd_fuzz.cc @@ -185,7 +185,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, /* TODO: implement a fuzzed version of this. bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, - uint16_t total_bytes) {} + uint16_t total_bytes) {} */ // Stall endpoint, any queuing transfer should be removed from endpoint @@ -205,4 +205,4 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { UNUSED(ep_addr); return; } -} \ No newline at end of file +} diff --git a/test/fuzz/device/cdc/CMakeLists.txt b/test/fuzz/device/cdc/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/test/fuzz/device/cdc/CMakeLists.txt +++ b/test/fuzz/device/cdc/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/test/fuzz/device/cdc/src/fuzz.cc b/test/fuzz/device/cdc/src/fuzz.cc index d40483ca6..0560e8621 100644 --- a/test/fuzz/device/cdc/src/fuzz.cc +++ b/test/fuzz/device/cdc/src/fuzz.cc @@ -143,7 +143,7 @@ void cdc_task(FuzzedDataProvider *provider) { // TODO: Fuzz interface number (void)tud_cdc_n_write(0, buffer.data(), buffer.size()); } break; - + case kCdcNWriteChar: // TODO: Fuzz interface number (void)tud_cdc_n_write_char(0, provider->ConsumeIntegral()); @@ -171,4 +171,4 @@ case kMaxValue: break; } } -} \ No newline at end of file +} diff --git a/test/fuzz/device/msc/CMakeLists.txt b/test/fuzz/device/msc/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/test/fuzz/device/msc/CMakeLists.txt +++ b/test/fuzz/device/msc/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/test/fuzz/device/msc/src/fuzz.cc b/test/fuzz/device/msc/src/fuzz.cc index 568900452..371d49882 100644 --- a/test/fuzz/device/msc/src/fuzz.cc +++ b/test/fuzz/device/msc/src/fuzz.cc @@ -59,4 +59,3 @@ extern "C" int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) { return 0; } - diff --git a/test/fuzz/device/net/CMakeLists.txt b/test/fuzz/device/net/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/test/fuzz/device/net/CMakeLists.txt +++ b/test/fuzz/device/net/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/test/fuzz/device/net/src/arch/cc.h b/test/fuzz/device/net/src/arch/cc.h index 56a0cacf7..9f30b91cb 100644 --- a/test/fuzz/device/net/src/arch/cc.h +++ b/test/fuzz/device/net/src/arch/cc.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, @@ -11,21 +11,21 @@ * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. + * derived from this software without specific prior written permission. * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. - * + * * Author: Adam Dunkels * */ @@ -42,7 +42,7 @@ typedef int sys_prot_t; #if defined (__ICCARM__) #define PACK_STRUCT_BEGIN -#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_STRUCT #define PACK_STRUCT_END #define PACK_STRUCT_FIELD(x) x #define PACK_STRUCT_USE_INCLUDES @@ -50,7 +50,7 @@ typedef int sys_prot_t; #elif defined (__CC_ARM) #define PACK_STRUCT_BEGIN __packed -#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_STRUCT #define PACK_STRUCT_END #define PACK_STRUCT_FIELD(x) x diff --git a/test/fuzz/device/net/src/fuzz.cc b/test/fuzz/device/net/src/fuzz.cc index ea4943665..a6935928a 100644 --- a/test/fuzz/device/net/src/fuzz.cc +++ b/test/fuzz/device/net/src/fuzz.cc @@ -81,7 +81,7 @@ void net_task(FuzzedDataProvider *provider) { assert(provider != NULL); switch (provider->ConsumeEnum()) { - + case kNetworkRecvRenew: tud_network_recv_renew(); break; diff --git a/test/fuzz/device/net/src/lwipopts.h b/test/fuzz/device/net/src/lwipopts.h index a215017c7..336c9243d 100644 --- a/test/fuzz/device/net/src/lwipopts.h +++ b/test/fuzz/device/net/src/lwipopts.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, @@ -11,21 +11,21 @@ * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. + * derived from this software without specific prior written permission. * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. - * + * * Author: Simon Goldschmidt * */ diff --git a/test/fuzz/dicts/cdc.dict b/test/fuzz/dicts/cdc.dict index 138775cdc..421eb8ed9 100644 --- a/test/fuzz/dicts/cdc.dict +++ b/test/fuzz/dicts/cdc.dict @@ -71,4 +71,3 @@ RNDIS_PACKET_TYPE_FUNCTIONAL="\x00\x00\x40\x00" # NIC driver frames that a Token Ring NIC receives. RNDIS_PACKET_TYPE_MAC_FRAME="\x00\x00\x80\x00" RNDIS_PACKET_TYPE_NO_LOCAL="\x00\x01\x00\x00" - diff --git a/test/fuzz/make.mk b/test/fuzz/make.mk index 934819665..b7b6d6a75 100644 --- a/test/fuzz/make.mk +++ b/test/fuzz/make.mk @@ -114,7 +114,7 @@ CXXFLAGS += \ # conversion is too strict for most mcu driver, may be disable sign/int/arith-conversion # -Wconversion - + # Debugging/Optimization ifeq ($(DEBUG), 1) CFLAGS += -Og @@ -132,4 +132,3 @@ endif ifneq ($(LOGGER),) CMAKE_DEFSYM += -DLOGGER=$(LOGGER) endif - diff --git a/test/fuzz/msc_fuzz.cc b/test/fuzz/msc_fuzz.cc index e906ca971..6e838a682 100644 --- a/test/fuzz/msc_fuzz.cc +++ b/test/fuzz/msc_fuzz.cc @@ -159,4 +159,4 @@ int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, } } -#endif \ No newline at end of file +#endif diff --git a/test/fuzz/net_fuzz.cc b/test/fuzz/net_fuzz.cc index 8467d6d8e..3158e74ef 100644 --- a/test/fuzz/net_fuzz.cc +++ b/test/fuzz/net_fuzz.cc @@ -79,4 +79,4 @@ void tud_network_link_state_cb(bool state) { } } -#endif \ No newline at end of file +#endif diff --git a/test/fuzz/rules.mk b/test/fuzz/rules.mk index d9c2a1a77..825abddc5 100644 --- a/test/fuzz/rules.mk +++ b/test/fuzz/rules.mk @@ -89,7 +89,7 @@ endif # Rules # --------------------------------------- -all: $(BUILD)/$(PROJECT) +all: $(BUILD)/$(PROJECT) OBJ_DIRS = $(sort $(dir $(OBJ))) $(OBJ): | $(OBJ_DIRS) @@ -111,7 +111,7 @@ vpath %.c . $(TOP) $(BUILD)/obj/%.o: %.c @echo CC $(notdir $@) @$(CC) $(CFLAGS) -c -MD -o $@ $< - + # All cpp srcs vpath %.cc . $(TOP) $(BUILD)/obj/%_cxx.o: %.cc @@ -158,4 +158,4 @@ linkermap: $(BUILD)/$(PROJECT) # Print out the value of a make variable. # https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile print-%: - @echo $* = $($*) \ No newline at end of file + @echo $* = $($*) diff --git a/test/unit-test/test/device/msc/test_msc_device.c b/test/unit-test/test/device/msc/test_msc_device.c index 63684e76a..c757cdcfa 100644 --- a/test/unit-test/test/device/msc/test_msc_device.c +++ b/test/unit-test/test/device/msc/test_msc_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, hathach (tinyusb.org) diff --git a/test/unit-test/test/device/usbd/test_usbd.c b/test/unit-test/test/device/usbd/test_usbd.c index ad95eb47a..dcded605a 100644 --- a/test/unit-test/test/device/usbd/test_usbd.c +++ b/test/unit-test/test/device/usbd/test_usbd.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/test/unit-test/test/test_fifo.c b/test/unit-test/test/test_fifo.c index 28be6d8fc..3b4deb33e 100644 --- a/test/unit-test/test/test_fifo.c +++ b/test/unit-test/test/test_fifo.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling.rb b/test/unit-test/vendor/ceedling/lib/ceedling.rb index 7f3400236..6c57fb48d 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling.rb @@ -96,4 +96,3 @@ module Ceedling DEFAULT_CEEDLING_CONFIG[:plugins][:load_paths] << gem_dir end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/build_invoker_utils.rb b/test/unit-test/vendor/ceedling/lib/ceedling/build_invoker_utils.rb index 5727bcabc..31abe6d99 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/build_invoker_utils.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/build_invoker_utils.rb @@ -5,7 +5,7 @@ require 'ceedling/constants' class BuildInvokerUtils constructor :configurator, :streaminator - + ## # Processes exceptions and tries to display a useful message for the user. # @@ -13,27 +13,27 @@ class BuildInvokerUtils # # * _exception_: The exception given by a rescue statement. # * _context_: A symbol representing where in the build the exception - # occurs. + # occurs. # * _test_build_: A bool to signify if the exception occurred while building # from test or source. # def process_exception(exception, context, test_build=true) if (exception.message =~ /Don't know how to build task '(.+)'/i) error_header = "ERROR: Rake could not find file referenced in source" - error_header += " or test" if (test_build) + error_header += " or test" if (test_build) error_header += ": '#{$1}'. Possible stale dependency." - + @streaminator.stderr_puts( error_header ) if (@configurator.project_use_deep_dependencies) - help_message = "Try fixing #include statements or adding missing file. Then run '#{REFRESH_TASK_ROOT}#{context.to_s}' task and try again." + help_message = "Try fixing #include statements or adding missing file. Then run '#{REFRESH_TASK_ROOT}#{context.to_s}' task and try again." @streaminator.stderr_puts( help_message ) end - + raise '' else raise exception end end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator.rb index 519a4aab4..fd7451fa7 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator.rb @@ -2,7 +2,7 @@ class Cacheinator constructor :cacheinator_helper, :file_path_utils, :file_wrapper, :yaml_wrapper - + def cache_test_config(hash) @yaml_wrapper.dump( @file_path_utils.form_test_build_cache_path( INPUT_CONFIGURATION_CACHE_FILE), hash ) end @@ -11,15 +11,15 @@ class Cacheinator @yaml_wrapper.dump( @file_path_utils.form_release_build_cache_path( INPUT_CONFIGURATION_CACHE_FILE ), hash ) end - + def diff_cached_test_file( filepath ) cached_filepath = @file_path_utils.form_test_build_cache_path( filepath ) - + if (@file_wrapper.exist?( cached_filepath ) and (!@file_wrapper.compare( filepath, cached_filepath ))) @file_wrapper.cp(filepath, cached_filepath, {:preserve => false}) return filepath elsif (!@file_wrapper.exist?( cached_filepath )) - @file_wrapper.cp(filepath, cached_filepath, {:preserve => false}) + @file_wrapper.cp(filepath, cached_filepath, {:preserve => false}) return filepath end @@ -43,5 +43,5 @@ class Cacheinator return @cacheinator_helper.diff_cached_config?( cached_filepath, hash ) end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator_helper.rb index 14e8a6ef0..b7fa5863f 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator_helper.rb @@ -2,7 +2,7 @@ class CacheinatorHelper constructor :file_wrapper, :yaml_wrapper - + def diff_cached_config?(cached_filepath, hash) return false if ( not @file_wrapper.exist?(cached_filepath) ) return true if (@yaml_wrapper.load(cached_filepath) != hash) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/cmock_builder.rb b/test/unit-test/vendor/ceedling/lib/ceedling/cmock_builder.rb index 4a74aa842..82ef96135 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/cmock_builder.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/cmock_builder.rb @@ -1,13 +1,13 @@ require 'cmock' class CmockBuilder - + attr_accessor :cmock - - def setup + + def setup @cmock = nil end - + def manufacture(cmock_config) @cmock = CMock.new(cmock_config) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/configurator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/configurator.rb index 0ae4d04a8..8dc11aa5a 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/configurator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/configurator.rb @@ -379,4 +379,3 @@ class Configurator end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_plugins.rb b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_plugins.rb index 75bcd982d..c2e198597 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_plugins.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_plugins.rb @@ -109,7 +109,7 @@ class ConfiguratorPlugins return defaults_with_path end - # gather up and return + # gather up and return def find_plugin_hash_defaults(config, plugin_paths) defaults_hash= [] diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_setup.rb b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_setup.rb index c43bb5c12..cba88df3c 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_setup.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_setup.rb @@ -79,7 +79,7 @@ class ConfiguratorSetup if config[:cmock][:unity_helper] config[:cmock][:unity_helper].each do |path| - validation << @configurator_validator.validate_filepath_simple( path, :cmock, :unity_helper ) + validation << @configurator_validator.validate_filepath_simple( path, :cmock, :unity_helper ) end end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_validator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_validator.rb index fc0210124..fc2950e0b 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_validator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_validator.rb @@ -6,7 +6,7 @@ require 'ceedling/file_path_utils' # for glob handling class methods class ConfiguratorValidator - + constructor :file_wrapper, :stream_wrapper, :system_wrapper # walk into config hash verify existence of data at key depth @@ -16,9 +16,9 @@ class ConfiguratorValidator if (not exist) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Required config file entry #{format_key_sequence(keys, hash[:depth])} does not exist.") + @stream_wrapper.stderr_puts("ERROR: Required config file entry #{format_key_sequence(keys, hash[:depth])} does not exist.") end - + return exist end @@ -33,39 +33,39 @@ class ConfiguratorValidator path_list = [] exist = true - + case list when String then path_list << list when Array then path_list = list end - + path_list.each do |path| base_path = FilePathUtils::extract_path(path) # lop off add/subtract notation & glob specifiers - + if (not @file_wrapper.exist?(base_path)) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Config path #{format_key_sequence(keys, hash[:depth])}['#{base_path}'] does not exist on disk.") + @stream_wrapper.stderr_puts("ERROR: Config path #{format_key_sequence(keys, hash[:depth])}['#{base_path}'] does not exist on disk.") exist = false - end + end end - + return exist end - + # simple path verification def validate_filepath_simple(path, *keys) validate_path = path - + if (not @file_wrapper.exist?(validate_path)) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Config path '#{validate_path}' associated with #{format_key_sequence(keys, keys.size)} does not exist on disk.") + @stream_wrapper.stderr_puts("ERROR: Config path '#{validate_path}' associated with #{format_key_sequence(keys, keys.size)} does not exist on disk.") return false - end - + end + return true end - + # walk into config hash. verify specified file exists. def validate_filepath(config, *keys) hash = retrieve_value(config, keys) @@ -76,21 +76,21 @@ class ConfiguratorValidator # skip everything if we've got an argument replacement pattern return true if (filepath =~ TOOL_EXECUTOR_ARGUMENT_REPLACEMENT_PATTERN) - + if (not @file_wrapper.exist?(filepath)) # See if we can deal with it internally. - if GENERATED_DIR_PATH.include?(filepath) + if GENERATED_DIR_PATH.include?(filepath) # we already made this directory before let's make it again. FileUtils.mkdir_p File.join(File.dirname(__FILE__), filepath) - @stream_wrapper.stderr_puts("WARNING: Generated filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk. Recreating") - + @stream_wrapper.stderr_puts("WARNING: Generated filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk. Recreating") + else # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk.") return false end - end + end return true end @@ -106,17 +106,17 @@ class ConfiguratorValidator # skip everything if we've got an argument replacement pattern return true if (filepath =~ TOOL_EXECUTOR_ARGUMENT_REPLACEMENT_PATTERN) - + # if there's no path included, verify file exists somewhere in system search paths if (not filepath.include?('/')) exists = false - + @system_wrapper.search_paths.each do |path| if (@file_wrapper.exist?( File.join(path, filepath)) ) exists = true break end - + if (@file_wrapper.exist?( (File.join(path, filepath)).ext( exe_extension ) )) exists = true break @@ -125,25 +125,25 @@ class ConfiguratorValidator break end end - + if (not exists) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist in system search paths.") - return false + @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist in system search paths.") + return false end - + # if there is a path included, check that explicit filepath exists else if (not @file_wrapper.exist?(filepath)) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk.") + @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk.") return false - end + end end return true end - + def validate_tool_stderr_redirect(config, tools, tool) redirect = config[tools][tool][:stderr_redirect] if (redirect.class == Symbol) @@ -151,17 +151,17 @@ class ConfiguratorValidator if (not StdErrRedirect.constants.map{|constant| constant.to_s}.include?(redirect.to_s.upcase)) error = "ERROR: [:#{tools}][:#{tool}][:stderr_redirect][:#{redirect}] is not a recognized option " + "{#{StdErrRedirect.constants.map{|constant| ':' + constant.to_s.downcase}.join(', ')}}." - @stream_wrapper.stderr_puts(error) - return false + @stream_wrapper.stderr_puts(error) + return false end end - + return true end - + private ######################################### - - + + def retrieve_value(config, keys) value = nil hash = config @@ -178,7 +178,7 @@ class ConfiguratorValidator break end end - + return {:value => value, :depth => depth} end @@ -186,8 +186,8 @@ class ConfiguratorValidator def format_key_sequence(keys, depth) walked_keys = keys.slice(0, depth) formatted_keys = walked_keys.map{|key| "[:#{key.to_s}]"} - + return formatted_keys.join end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/erb_wrapper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/erb_wrapper.rb index 8d70b6d28..dab8d736b 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/erb_wrapper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/erb_wrapper.rb @@ -6,4 +6,4 @@ class ErbWrapper f << ERB.new(template, 0, "<>").result(binding) end end -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/file_finder.rb b/test/unit-test/vendor/ceedling/lib/ceedling/file_finder.rb index 53775b7bb..4a1064c52 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/file_finder.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/file_finder.rb @@ -146,4 +146,3 @@ class FileFinder return @file_finder_helper.find_file_in_collection(file_path, file_list, complain) end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/file_finder_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/file_finder_helper.rb index a168e5cb5..f2d6a5e91 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/file_finder_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/file_finder_helper.rb @@ -4,11 +4,11 @@ require 'ceedling/constants' # for Verbosity enumeration class FileFinderHelper constructor :streaminator - - + + def find_file_in_collection(file_name, file_list, complain, extra_message="") file_to_find = nil - + file_list.each do |item| base_file = File.basename(item) @@ -22,29 +22,29 @@ class FileFinderHelper blow_up(file_name, "However, a filename having different capitalization was found: '#{item}'.") end end - + end - + if file_to_find.nil? case (complain) - when :error then blow_up(file_name, extra_message) + when :error then blow_up(file_name, extra_message) when :warn then gripe(file_name, extra_message) - #when :ignore then + #when :ignore then end end - + return file_to_find end private - + def blow_up(file_name, extra_message="") error = "ERROR: Found no file '#{file_name}' in search paths." error += ' ' if (extra_message.length > 0) @streaminator.stderr_puts(error + extra_message, Verbosity::ERRORS) raise end - + def gripe(file_name, extra_message="") warning = "WARNING: Found no file '#{file_name}' in search paths." warning += ' ' if (extra_message.length > 0) @@ -52,5 +52,3 @@ class FileFinderHelper end end - - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/file_system_utils.rb b/test/unit-test/vendor/ceedling/lib/ceedling/file_system_utils.rb index 97e5856fb..245d8f826 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/file_system_utils.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/file_system_utils.rb @@ -6,7 +6,7 @@ require 'ceedling/file_path_utils' class FileSystemUtils - + constructor :file_wrapper # build up path list from input of one or more strings or arrays of (+/-) paths & globs @@ -14,7 +14,7 @@ class FileSystemUtils raw = [] # all paths and globs plus = Set.new # all paths to expand and add minus = Set.new # all paths to remove from plus set - + # assemble all globs and simple paths, reforming our glob notation to ruby globs paths.each do |paths_container| case (paths_container) @@ -26,29 +26,29 @@ class FileSystemUtils # iterate through each path and glob raw.each do |path| - + dirs = [] # container for only (expanded) paths - + # if a glob, expand it and slurp up all non-file paths if path.include?('*') # grab base directory only if globs are snug up to final path separator if (path =~ /\/\*+$/) dirs << FilePathUtils.extract_path(path) end - + # grab expanded sub-directory globs expanded = @file_wrapper.directory_listing( FilePathUtils.extract_path_no_aggregation_operators(path) ) expanded.each do |entry| dirs << entry if @file_wrapper.directory?(entry) end - + # else just grab simple path # note: we could just run this through glob expansion but such an # approach doesn't handle a path not yet on disk) else dirs << FilePathUtils.extract_path_no_aggregation_operators(path) end - + # add dirs to the appropriate set based on path aggregation modifier if present FilePathUtils.add_path?(path) ? plus.merge(dirs) : minus.merge(dirs) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/file_system_wrapper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/file_system_wrapper.rb index 807cbd23f..1bb2883ee 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/file_system_wrapper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/file_system_wrapper.rb @@ -7,4 +7,4 @@ class FileSystemWrapper end end -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/flaginator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/flaginator.rb index 31d62c46a..175b3c5ac 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/flaginator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/flaginator.rb @@ -29,25 +29,25 @@ class Flaginator def get_flag(hash, file_name) file_key = file_name.to_sym - + # 1. try literals - literals, magic = partition(hash) { |k, v| k.to_s =~ /^\w+$/ } + literals, magic = partition(hash) { |k, v| k.to_s =~ /^\w+$/ } return literals[file_key] if literals.include?(file_key) - + any, regex = partition(magic) { |k, v| (k == :'*') || (k == :'.*') } # glob or regex wild card - + # 2. try regexes find_res = regex.find { |k, v| file_name =~ /^#{k.to_s}$/ } return find_res[1] if find_res - + # 3. try anything find_res = any.find { |k, v| file_name =~ /.*/ } return find_res[1] if find_res - + # 4. well, we've tried return [] end - + def flag_down( operation, context, file ) # create configurator accessor method accessor = ('flags_' + context.to_s).to_sym diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/generator_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/generator_helper.rb index 343156092..a6682c275 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/generator_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/generator_helper.rb @@ -9,7 +9,7 @@ class GeneratorHelper def test_results_error_handler(executable, shell_result) notice = '' error = false - + if (shell_result[:output].nil? or shell_result[:output].strip.empty?) error = true # mirror style of generic tool_executor failure output @@ -24,7 +24,7 @@ class GeneratorHelper "> Produced no final test result counts in $stdout:\n" + "#{shell_result[:output].strip}\n" end - + if (error) # since we told the tool executor to ignore the exit code, handle it explicitly here notice += "> And exited with status: [#{shell_result[:exit_code]}] (count of failed tests).\n" if (shell_result[:exit_code] != nil) @@ -33,8 +33,8 @@ class GeneratorHelper notice += "> This is often a symptom of a bad memory access in source or test code.\n\n" @streaminator.stderr_puts(notice, Verbosity::COMPLAIN) - raise + raise end end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results.rb b/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results.rb index 3af2d720a..2cd96478c 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results.rb @@ -77,7 +77,7 @@ class GeneratorTestResults # handle anything preceding filename in line as extra output to be collected stdout = nil stdout_regex = /(.+)#{Regexp.escape(filename)}.+/i - unity_test_time = 0 + unity_test_time = 0 if (line =~ stdout_regex) stdout = $1.clone diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results_sanity_checker.rb b/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results_sanity_checker.rb index 0b518325b..1d193c844 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results_sanity_checker.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results_sanity_checker.rb @@ -6,34 +6,34 @@ require 'ceedling/constants' class GeneratorTestResultsSanityChecker constructor :configurator, :streaminator - + def verify(results, unity_exit_code) - + # do no sanity checking if it's disabled return if (@configurator.sanity_checks == TestResultsSanityChecks::NONE) raise "results nil or empty" if results.nil? || results.empty? - ceedling_ignores_count = results[:ignores].size + ceedling_ignores_count = results[:ignores].size ceedling_failures_count = results[:failures].size ceedling_tests_summation = (ceedling_ignores_count + ceedling_failures_count + results[:successes].size) - # Exit code handling is not a sanity check that can always be performed because + # Exit code handling is not a sanity check that can always be performed because # command line simulators may or may not pass through Unity's exit code if (@configurator.sanity_checks >= TestResultsSanityChecks::THOROUGH) # many platforms limit exit codes to a maximum of 255 if ((ceedling_failures_count != unity_exit_code) and (unity_exit_code < 255)) sanity_check_warning(results[:source][:file], "Unity's exit code (#{unity_exit_code}) does not match Ceedling's summation of failed test cases (#{ceedling_failures_count}).") end - + if ((ceedling_failures_count < 255) and (unity_exit_code == 255)) sanity_check_warning(results[:source][:file], "Ceedling's summation of failed test cases (#{ceedling_failures_count}) is less than Unity's exit code (255 or more).") end end - + if (ceedling_ignores_count != results[:counts][:ignored]) sanity_check_warning(results[:source][:file], "Unity's final ignore count (#{results[:counts][:ignored]}) does not match Ceedling's summation of ignored test cases (#{ceedling_ignores_count}).") end - + if (ceedling_failures_count != results[:counts][:failed]) sanity_check_warning(results[:source][:file], "Unity's final fail count (#{results[:counts][:failed]}) does not match Ceedling's summation of failed test cases (#{ceedling_failures_count}).") end @@ -41,14 +41,14 @@ class GeneratorTestResultsSanityChecker if (ceedling_tests_summation != results[:counts][:total]) sanity_check_warning(results[:source][:file], "Unity's final test count (#{results[:counts][:total]}) does not match Ceedling's summation of all test cases (#{ceedling_tests_summation}).") end - + end private - + def sanity_check_warning(file, message) unless defined?(CEEDLING_IGNORE_SANITY_CHECK) - notice = "\n" + + notice = "\n" + "ERROR: Internal sanity check for test fixture '#{file.ext(@configurator.extension_executable)}' finds that #{message}\n" + " Possible causes:\n" + " 1. Your test + source dereferenced a null pointer.\n" + @@ -56,7 +56,7 @@ class GeneratorTestResultsSanityChecker " 3. Your test + source committed a memory access violation.\n" + " 4. Your test fixture produced an exit code of 0 despite execution ending prematurely.\n" + " Sanity check failures of test results are usually a symptom of interrupted test execution.\n\n" - + @streaminator.stderr_puts( notice ) raise end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/loginator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/loginator.rb index 92276e1df..38147b322 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/loginator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/loginator.rb @@ -11,7 +11,7 @@ class Loginator config_files.concat( @project_config_manager.options_files ) config_files.compact! config_files.map! { |file| file.ext('') } - + log_name = config_files.join( '_' ) @project_log_filepath = File.join( @configurator.project_log_path, log_name.ext('.log') ) @@ -20,12 +20,12 @@ class Loginator def log(string, heading=nil) return if (not @configurator.project_logging) - + output = "\n[#{@system_wrapper.time_now}]" output += " :: #{heading}" if (not heading.nil?) output += "\n#{string.strip}\n" @file_wrapper.write(@project_log_filepath, output, 'a') end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/makefile.rb b/test/unit-test/vendor/ceedling/lib/ceedling/makefile.rb index c3d7496d2..9ad894ea0 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/makefile.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/makefile.rb @@ -1,6 +1,6 @@ # modified version of Rake's provided make-style dependency loader -# customizations: +# customizations: # (1) handles windows drives in paths -- colons don't confuse task demarcation # (2) handles spaces in directory paths @@ -29,7 +29,7 @@ module Rake file_tasks, args = line.split(/:\s/) return if args.nil? - + # split at non-escaped space boundary between files (i.e. escaped spaces in paths are left alone) dependents = args.split(/\b\s+/) # replace escaped spaces and clean up any extra whitespace diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/objects.yml b/test/unit-test/vendor/ceedling/lib/ceedling/objects.yml index 43bbc066c..d73987f7c 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/objects.yml +++ b/test/unit-test/vendor/ceedling/lib/ceedling/objects.yml @@ -223,7 +223,7 @@ dependinator: - configurator - project_config_manager - test_includes_extractor - - file_path_utils + - file_path_utils - rake_wrapper - file_wrapper diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/par_map.rb b/test/unit-test/vendor/ceedling/lib/ceedling/par_map.rb index 98198a2ce..250b5ad30 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/par_map.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/par_map.rb @@ -16,4 +16,3 @@ def par_map(n, things, &block) end threads.each { |t| t.join } end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/plugin.rb b/test/unit-test/vendor/ceedling/lib/ceedling/plugin.rb index f20b3a3b2..835c08c52 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/plugin.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/plugin.rb @@ -5,7 +5,7 @@ class String def left_margin(margin=0) non_whitespace_column = 0 new_lines = [] - + # find first line with non-whitespace and count left columns of whitespace self.each_line do |line| if (line =~ /^\s*\S/) @@ -13,7 +13,7 @@ class String break end end - + # iterate through each line, chopping off leftmost whitespace columns and add back the desired whitespace margin self.each_line do |line| columns = [] @@ -25,7 +25,7 @@ class String new_lines << "\n" end end - + return new_lines.join end end @@ -74,7 +74,7 @@ class Plugin # whole shebang (any use of Ceedling) def pre_build; end def post_build; end - + def summary; end end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_builder.rb b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_builder.rb index 1269141f1..a010e1d0f 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_builder.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_builder.rb @@ -23,7 +23,7 @@ class PluginBuilder end private - + def camelize(underscored_name) return underscored_name.gsub(/(_|^)([a-z0-9])/) {$2.upcase} end @@ -50,4 +50,4 @@ class PluginBuilder end end -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator.rb index 8d83727ba..afc54494b 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator.rb @@ -2,46 +2,46 @@ require 'ceedling/constants' require 'ceedling/defaults' class PluginReportinator - + constructor :plugin_reportinator_helper, :plugin_manager, :reportinator def setup @test_results_template = nil end - - + + def set_system_objects(system_objects) @plugin_reportinator_helper.ceedling = system_objects end - - + + def fetch_results(results_path, test, options={:boom => false}) return @plugin_reportinator_helper.fetch_results( File.join(results_path, test), options ) end - + def generate_banner(message) return @reportinator.generate_banner(message) end - + def assemble_test_results(results_list, options={:boom => false}) aggregated_results = get_results_structure - - results_list.each do |result_path| + + results_list.each do |result_path| results = @plugin_reportinator_helper.fetch_results( result_path, options ) @plugin_reportinator_helper.process_results(aggregated_results, results) end return aggregated_results end - - + + def register_test_results_template(template) @test_results_template = template if (@test_results_template.nil?) end - - + + def run_test_results_report(hash, verbosity=Verbosity::NORMAL, &block) run_report( $stdout, ((@test_results_template.nil?) ? DEFAULT_TESTS_RESULTS_REPORT_TEMPLATE : @test_results_template), @@ -49,19 +49,19 @@ class PluginReportinator verbosity, &block ) end - - + + def run_report(stream, template, hash=nil, verbosity=Verbosity::NORMAL) failure = nil failure = yield() if block_given? - + @plugin_manager.register_build_failure( failure ) - + @plugin_reportinator_helper.run_report( stream, template, hash, verbosity ) end - + private ############################### - + def get_results_structure return { :successes => [], @@ -72,5 +72,5 @@ class PluginReportinator :time => 0.0 } end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator_helper.rb index 322a530b5..783158797 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator_helper.rb @@ -4,11 +4,11 @@ require 'rake' # for ext() require 'ceedling/constants' class PluginReportinatorHelper - + attr_writer :ceedling - + constructor :configurator, :streaminator, :yaml_wrapper, :file_wrapper - + def fetch_results(results_path, options) pass_path = File.join(results_path.ext( @configurator.extension_testpass )) fail_path = File.join(results_path.ext( @configurator.extension_testfail )) @@ -23,7 +23,7 @@ class PluginReportinatorHelper raise end end - + return {} end @@ -47,5 +47,5 @@ class PluginReportinatorHelper output = ERB.new(template, 0, "%<>") @streaminator.stream_puts(stream, output.result(binding()), verbosity) end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/preprocessinator_includes_handler.rb b/test/unit-test/vendor/ceedling/lib/ceedling/preprocessinator_includes_handler.rb index 8b89c0b3a..916d31332 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/preprocessinator_includes_handler.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/preprocessinator_includes_handler.rb @@ -94,7 +94,7 @@ class PreprocessinatorIncludesHandler target_file = make_rule.split[0].gsub(':', '').gsub('\\','/') base = File.basename(target_file, File.extname(target_file)) make_rule_dependencies = make_rule.gsub(/.*\b#{Regexp.escape(base)}\S*/, '').gsub(/\\$/, '') - + # Extract the headers dependencies from the make rule hdr_ext = @configurator.extension_header headers_dependencies = make_rule_dependencies.split.find_all {|path| path.end_with?(hdr_ext) }.uniq diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/project_config_manager.rb b/test/unit-test/vendor/ceedling/lib/ceedling/project_config_manager.rb index ed7a73b8c..b1d455127 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/project_config_manager.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/project_config_manager.rb @@ -20,7 +20,7 @@ class ProjectConfigManager def merge_options(config_hash, option_filepath) @options_files << File.basename( option_filepath ) config_hash.deep_merge!( @yaml_wrapper.load( option_filepath ) ) - end + end def filter_internal_sources(sources) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rake_utils.rb b/test/unit-test/vendor/ceedling/lib/ceedling/rake_utils.rb index 3f667c852..b13749738 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rake_utils.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rake_utils.rb @@ -1,6 +1,6 @@ class RakeUtils - + constructor :rake_wrapper def task_invoked?(task_regex) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/reportinator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/reportinator.rb index 0f583d06d..fcb5286b9 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/reportinator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/reportinator.rb @@ -14,8 +14,8 @@ class Reportinator # ==== Examples # # rp = Reportinator.new - # rp.generate_banner("Hello world!") => "------------\nHello world!\n------------\n" - # rp.generate_banner("Hello world!", 3) => "---\nHello world!\n---\n" + # rp.generate_banner("Hello world!") => "------------\nHello world!\n------------\n" + # rp.generate_banner("Hello world!", 3) => "---\nHello world!\n---\n" # # def generate_banner(message, width=nil) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_cmock.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_cmock.rake index 70ddcbc2e..51485d3a8 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_cmock.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_cmock.rake @@ -3,7 +3,7 @@ rule(/#{CMOCK_MOCK_PREFIX}[^\/\\]+#{'\\'+EXTENSION_SOURCE}$/ => [ proc do |task_name| @ceedling[:file_finder].find_header_input_for_mock_file(task_name) - end + end ]) do |mock| @ceedling[:generator].generate_mock(TEST_SYM, mock.source) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_preprocess.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_preprocess.rake index c29111272..936961ce8 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_preprocess.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_preprocess.rake @@ -6,7 +6,7 @@ rule(/#{PROJECT_TEST_PREPROCESS_FILES_PATH}\/.+/ => [ proc do |task_name| @ceedling[:file_finder].find_test_or_source_or_header_file(task_name) - end + end ]) do |file| if (not @ceedling[:configurator].project_use_deep_dependencies) raise 'ERROR: Ceedling preprocessing rule invoked though neccessary auxiliary dependency support not enabled.' @@ -19,8 +19,7 @@ end rule(/#{PROJECT_TEST_PREPROCESS_INCLUDES_PATH}\/.+/ => [ proc do |task_name| @ceedling[:file_finder].find_test_or_source_or_header_file(task_name) - end + end ]) do |file| @ceedling[:generator].generate_shallow_includes_list(TEST_SYM, file.source) end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_release.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_release.rake index 4a583bd6c..47eec858f 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_release.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_release.rake @@ -96,4 +96,3 @@ namespace RELEASE_SYM do end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_release_deep_dependencies.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_release_deep_dependencies.rake index 9550783cc..bf944de25 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_release_deep_dependencies.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_release_deep_dependencies.rake @@ -3,7 +3,7 @@ rule(/#{PROJECT_RELEASE_DEPENDENCIES_PATH}\/#{'.+\\'+EXTENSION_DEPENDENCIES}$/ => [ proc do |task_name| @ceedling[:file_finder].find_compilation_input_file(task_name, :error, true) - end + end ]) do |dep| @ceedling[:generator].generate_dependencies_file( TOOLS_RELEASE_DEPENDENCIES_GENERATOR, @@ -12,4 +12,3 @@ rule(/#{PROJECT_RELEASE_DEPENDENCIES_PATH}\/#{'.+\\'+EXTENSION_DEPENDENCIES}$/ = @ceedling[:file_path_utils].form_release_build_c_object_filepath(dep.source), dep.name) end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests.rake index 61e15e2cc..3ab80f3a9 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests.rake @@ -70,4 +70,3 @@ namespace TEST_SYM do @ceedling[:test_invoker].setup_and_invoke([test.source]) end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests_deep_dependencies.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests_deep_dependencies.rake index 7175ee3f2..a8dfd296e 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests_deep_dependencies.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests_deep_dependencies.rake @@ -12,4 +12,3 @@ rule(/#{PROJECT_TEST_DEPENDENCIES_PATH}\/#{'.+\\'+EXTENSION_DEPENDENCIES}$/ => [ @ceedling[:file_path_utils].form_test_build_c_object_filepath(dep.source), dep.name) end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/setupinator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/setupinator.rb index ea78fd97e..cf9922f07 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/setupinator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/setupinator.rb @@ -18,7 +18,7 @@ class Setupinator @config_hash = config_hash # load up all the constants and accessors our rake files, objects, & external scripts will need; - # note: configurator modifies the cmock section of the hash with a couple defaults to tie + # note: configurator modifies the cmock section of the hash with a couple defaults to tie # project together - the modified hash is used to build cmock object @ceedling[:configurator].populate_defaults( config_hash ) @ceedling[:configurator].populate_unity_defaults( config_hash ) @@ -31,16 +31,16 @@ class Setupinator @ceedling[:configurator].standardize_paths( config_hash ) @ceedling[:configurator].validate( config_hash ) @ceedling[:configurator].build( config_hash, :environment ) - + @ceedling[:configurator].insert_rake_plugins( @ceedling[:configurator].rake_plugins ) @ceedling[:configurator].tools_supplement_arguments( config_hash ) - + # merge in any environment variables plugins specify, after the main build @ceedling[:plugin_manager].load_plugin_scripts( @ceedling[:configurator].script_plugins, @ceedling ) do |env| @ceedling[:configurator].eval_environment_variables( env ) @ceedling[:configurator].build_supplement( config_hash, env ) end - + @ceedling[:plugin_reportinator].set_system_objects( @ceedling ) @ceedling[:file_finder].prepare_search_sources @ceedling[:loginator].setup_log_filepath diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/stream_wrapper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/stream_wrapper.rb index 7e160527f..2cee58d3e 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/stream_wrapper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/stream_wrapper.rb @@ -16,7 +16,7 @@ class StreamWrapper def stdout_flush $stdout.flush end - + def stderr_puts(string) $stderr.puts(string) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/streaminator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/streaminator.rb index b8dcd070f..e30440c7d 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/streaminator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/streaminator.rb @@ -12,7 +12,7 @@ class Streaminator @stream_wrapper.stdout_puts(string) @stream_wrapper.stdout_flush end - + # write to log as though Verbosity::OBNOXIOUS @loginator.log( string, @streaminator_helper.extract_name($stdout) ) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/streaminator_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/streaminator_helper.rb index 9fb5cc0b7..cbaef7c92 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/streaminator_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/streaminator_helper.rb @@ -8,7 +8,7 @@ class StreaminatorHelper when 2 then '#' else stream.inspect end - + return name end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/system_utils.rb b/test/unit-test/vendor/ceedling/lib/ceedling/system_utils.rb index 477aba4f1..81bb7bc54 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/system_utils.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/system_utils.rb @@ -13,7 +13,7 @@ class SystemUtils constructor :system_wrapper ## - # Sets up the class. + # Sets up the class. def setup @tcsh_shell = nil end @@ -23,7 +23,7 @@ class SystemUtils def tcsh_shell? # once run a single time, return state determined at that execution return @tcsh_shell if not @tcsh_shell.nil? - + result = @system_wrapper.shell_backticks('echo $version') if ((result[:exit_code] == 0) and (result[:output].strip =~ /^tcsh/)) @@ -31,7 +31,7 @@ class SystemUtils else @tcsh_shell = false end - + return @tcsh_shell end end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/task_invoker.rb b/test/unit-test/vendor/ceedling/lib/ceedling/task_invoker.rb index 7bfabbb12..35f92ae03 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/task_invoker.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/task_invoker.rb @@ -11,7 +11,7 @@ class TaskInvoker @release_regexs = [/^#{RELEASE_ROOT_NAME}(:|$)/] @first_run = true end - + def add_test_task_regex(regex) @test_regexs << regex end @@ -19,26 +19,26 @@ class TaskInvoker def add_release_task_regex(regex) @release_regexs << regex end - + def test_invoked? invoked = false - + @test_regexs.each do |regex| invoked = true if (@rake_utils.task_invoked?(regex)) break if invoked end - + return invoked end - + def release_invoked? invoked = false - + @release_regexs.each do |regex| invoked = true if (@rake_utils.task_invoked?(regex)) break if invoked end - + return invoked end @@ -60,7 +60,7 @@ class TaskInvoker @rake_wrapper[mock].invoke } end - + def invoke_test_runner(runner) @dependinator.enhance_runner_dependencies( runner ) reset_rake_task_for_changed_defines( runner ) @@ -112,11 +112,11 @@ class TaskInvoker @rake_wrapper[file].invoke end end - + def invoke_release_objects(objects) par_map(PROJECT_COMPILE_THREADS, objects) do |object| @rake_wrapper[object].invoke end end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_base.rake b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_base.rake index a35cde75e..67a3b503a 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_base.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_base.rake @@ -113,4 +113,3 @@ task :summary do puts "\nNOTE: Summaries may be out of date with project sources.\n\n" end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_filesystem.rake b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_filesystem.rake index 7b950ca0b..8263955fa 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_filesystem.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_filesystem.rake @@ -109,5 +109,3 @@ namespace :files do end end - - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_release.rake b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_release.rake index b313b2f53..9d3a59c53 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_release.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_release.rake @@ -5,8 +5,8 @@ require 'ceedling/file_path_utils' desc "Build release target." task RELEASE_SYM => [:directories] do header = "Release build '#{File.basename(PROJECT_RELEASE_BUILD_TARGET)}'" - @ceedling[:streaminator].stdout_puts("\n\n#{header}\n#{'-' * header.length}") - + @ceedling[:streaminator].stdout_puts("\n\n#{header}\n#{'-' * header.length}") + begin @ceedling[:plugin_manager].pre_release @@ -15,16 +15,15 @@ task RELEASE_SYM => [:directories] do @ceedling[:project_config_manager].process_release_config_change core_objects.concat( @ceedling[:release_invoker].setup_and_invoke_c_objects( COLLECTION_ALL_SOURCE ) ) - + # if assembler use isn't enabled, COLLECTION_ALL_ASSEMBLY is empty array & nothing happens core_objects.concat( @ceedling[:release_invoker].setup_and_invoke_asm_objects( COLLECTION_ALL_ASSEMBLY ) ) - + # if we're using libraries, we need to add those to our collection as well library_objects = (defined? LIBRARIES_RELEASE && !LIBRARIES_RELEASE.empty?) ? LIBRARIES_RELEASE.flatten.compact : [] file( PROJECT_RELEASE_BUILD_TARGET => (core_objects + extra_objects + library_objects) ) Rake::Task[PROJECT_RELEASE_BUILD_TARGET].invoke ensure - @ceedling[:plugin_manager].post_release + @ceedling[:plugin_manager].post_release end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_tests.rake b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_tests.rake index 6c51ebcc9..5c1006b36 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_tests.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_tests.rake @@ -59,4 +59,3 @@ namespace TEST_SYM do end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/test_invoker_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/test_invoker_helper.rb index 403d93e3e..a48edf9f9 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/test_invoker_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/test_invoker_helper.rb @@ -19,14 +19,14 @@ class TestInvokerHelper yield( dependencies_list ) if block_given? end - + def extract_sources(test) sources = [] includes = @test_includes_extractor.lookup_includes_list(test) - + includes.each { |include| sources << @file_finder.find_compilation_input_file(include, :ignore) } - + return sources.compact end - + end diff --git a/test/unit-test/vendor/ceedling/plugins/beep/lib/beep.rb b/test/unit-test/vendor/ceedling/plugins/beep/lib/beep.rb index 6a6d01ab2..cbc5e3e38 100644 --- a/test/unit-test/vendor/ceedling/plugins/beep/lib/beep.rb +++ b/test/unit-test/vendor/ceedling/plugins/beep/lib/beep.rb @@ -37,4 +37,3 @@ class Beep < Plugin end end end - diff --git a/test/unit-test/vendor/ceedling/plugins/bullseye/README.md b/test/unit-test/vendor/ceedling/plugins/bullseye/README.md index ab0b53b45..aad449204 100644 --- a/test/unit-test/vendor/ceedling/plugins/bullseye/README.md +++ b/test/unit-test/vendor/ceedling/plugins/bullseye/README.md @@ -5,7 +5,7 @@ ceedling-bullseye Plugin for integrating Bullseye code coverage tool into Ceedling projects. This plugin requires a working license to Bullseye code coverage tools. The tools -must be within the path or the path should be added to the environment in the +must be within the path or the path should be added to the environment in the `project.yml file`. ## Configuration diff --git a/test/unit-test/vendor/ceedling/plugins/bullseye/assets/template.erb b/test/unit-test/vendor/ceedling/plugins/bullseye/assets/template.erb index 504f85583..e1ef9874b 100644 --- a/test/unit-test/vendor/ceedling/plugins/bullseye/assets/template.erb +++ b/test/unit-test/vendor/ceedling/plugins/bullseye/assets/template.erb @@ -12,4 +12,3 @@ BRANCHES: <%=sprintf(format_string, hash[:coverage][:branches])%>% % else BRANCHES: none % end - diff --git a/test/unit-test/vendor/ceedling/plugins/bullseye/lib/bullseye.rb b/test/unit-test/vendor/ceedling/plugins/bullseye/lib/bullseye.rb index ffa444ac7..3e7622006 100644 --- a/test/unit-test/vendor/ceedling/plugins/bullseye/lib/bullseye.rb +++ b/test/unit-test/vendor/ceedling/plugins/bullseye/lib/bullseye.rb @@ -38,7 +38,7 @@ class Bullseye < Plugin @ceedling[:plugin_manager].pre_compile_execute(arg_hash) @ceedling[:streaminator].stdout_puts("Compiling #{File.basename(source)} with coverage...") - compile_command = + compile_command = @ceedling[:tool_executor].build_command_line( TOOLS_BULLSEYE_COMPILER, @ceedling[:flaginator].flag_down( OPERATION_COMPILE_SYM, BULLSEYE_SYM, source ), @@ -48,14 +48,14 @@ class Bullseye < Plugin coverage_command = @ceedling[:tool_executor].build_command_line(TOOLS_BULLSEYE_INSTRUMENTATION, [], compile_command[:line] ) shell_result = @ceedling[:tool_executor].exec( coverage_command[:line], coverage_command[:options] ) - + arg_hash[:shell_result] = shell_result @ceedling[:plugin_manager].post_compile_execute(arg_hash) end def post_test_fixture_execute(arg_hash) result_file = arg_hash[:result_file] - + if ((result_file =~ /#{BULLSEYE_RESULTS_PATH}/) and (not @result_list.include?(result_file))) @result_list << arg_hash[:result_file] end @@ -70,13 +70,13 @@ class Bullseye < Plugin :header => BULLSEYE_ROOT_NAME.upcase, :results => results } - + @ceedling[:plugin_reportinator].run_test_results_report(hash) do message = '' message = 'Unit test failures.' if (results[:counts][:failed] > 0) message end - + # coverage results return if (verify_coverage_file() == false) if (@ceedling[:task_invoker].invoked?(/^#{BULLSEYE_TASK_ROOT}(all|delta)/)) @@ -100,13 +100,13 @@ class Bullseye < Plugin } @ceedling[:plugin_reportinator].run_test_results_report(hash) - + # coverage results command = @ceedling[:tool_executor].build_command_line(TOOLS_BULLSEYE_REPORT_COVSRC) shell_result = @ceedling[:tool_executor].exec(command[:line], command[:options]) report_coverage_results_all(shell_result[:output]) end - + def enableBullseye(enable) if BULLSEYE_AUTO_LICENSE if (enable) @@ -117,14 +117,14 @@ class Bullseye < Plugin @ceedling[:streaminator].stdout_puts("Reverting Bullseye to previous state") end - args.each do |arg| + args.each do |arg| command = @ceedling[:tool_executor].build_command_line(TOOLS_BULLSEYE_BUILD_ENABLE_DISABLE, [], arg) shell_result = @ceedling[:tool_executor].exec(command[:line], command[:options]) end end end - + private ################################### def report_coverage_results_all(coverage) @@ -139,7 +139,7 @@ class Bullseye < Plugin if (coverage =~ /^Total.*?=\s+([0-9]+)\%/) results[:coverage][:functions] = $1.to_i end - + if (coverage =~ /^Total.*=\s+([0-9]+)\%\s*$/) results[:coverage][:branches] = $1.to_i end @@ -177,10 +177,10 @@ class Bullseye < Plugin banner = @ceedling[:plugin_reportinator].generate_banner( "#{BULLSEYE_ROOT_NAME.upcase}: CODE COVERAGE SUMMARY" ) @ceedling[:streaminator].stdout_puts "\n" + banner + "\nNo coverage file.\n\n" end - + return exist end - + end @@ -188,7 +188,7 @@ end END { # cache our input configurations to use in comparison upon next execution if (@ceedling[:task_invoker].invoked?(/^#{BULLSEYE_TASK_ROOT}/)) - @ceedling[:cacheinator].cache_test_config( @ceedling[:setupinator].config_hash ) + @ceedling[:cacheinator].cache_test_config( @ceedling[:setupinator].config_hash ) @ceedling[BULLSEYE_SYM].enableBullseye(false) end } diff --git a/test/unit-test/vendor/ceedling/plugins/colour_report/README.md b/test/unit-test/vendor/ceedling/plugins/colour_report/README.md index 4e0fcd45e..5f4ff77b1 100644 --- a/test/unit-test/vendor/ceedling/plugins/colour_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/colour_report/README.md @@ -3,7 +3,7 @@ ceedling-colour-report ## Overview -The colour_report replaces the normal ceedling "pretty" output with +The colour_report replaces the normal ceedling "pretty" output with a colorized variant, in order to make the results easier to read from a standard command line. This is very useful on developer machines, but can occasionally cause problems with parsing on CI servers. diff --git a/test/unit-test/vendor/ceedling/plugins/command_hooks/lib/command_hooks.rb b/test/unit-test/vendor/ceedling/plugins/command_hooks/lib/command_hooks.rb index 4bf8b5312..67e94f935 100644 --- a/test/unit-test/vendor/ceedling/plugins/command_hooks/lib/command_hooks.rb +++ b/test/unit-test/vendor/ceedling/plugins/command_hooks/lib/command_hooks.rb @@ -89,4 +89,3 @@ class CommandHooks < Plugin end end end - diff --git a/test/unit-test/vendor/ceedling/plugins/compile_commands_json/README.md b/test/unit-test/vendor/ceedling/plugins/compile_commands_json/README.md index ea80b7397..7e3846e56 100644 --- a/test/unit-test/vendor/ceedling/plugins/compile_commands_json/README.md +++ b/test/unit-test/vendor/ceedling/plugins/compile_commands_json/README.md @@ -9,7 +9,7 @@ In June of 2016, Microsoft with Red Hat and Codenvy got together to create a sta For C and C++ projects, many people use the `clangd` backend. So that it can do things like "go to definition", `clangd` needs to know how to build the project so that it can figure out all the pieces to the puzzle. There are manual tools such as `bear` which can be run with `gcc` or `clang` to extract this information it has a big limitation in that if run with `ceedling release` you won't get any auto completion for Unity and you'll also get error messages reported by your IDE because of what it perceives as missing headers. If you do the same with `ceedling test` now you get Unity but you might miss things that are only seen in the release build. -This plugin resolves that issue. As it is run by Ceedling, it has access to all the build information it needs to create the perfect `compile_commands.json`. Once enabled, this plugin will generate that file and place it in `./build/artifacts/compile_commands.json`. `clangd` will search your project for this file, but it is easier to symlink it into the root directory (for example `ln -s ./build/artifacts/compile_commands.json`. +This plugin resolves that issue. As it is run by Ceedling, it has access to all the build information it needs to create the perfect `compile_commands.json`. Once enabled, this plugin will generate that file and place it in `./build/artifacts/compile_commands.json`. `clangd` will search your project for this file, but it is easier to symlink it into the root directory (for example `ln -s ./build/artifacts/compile_commands.json`. For more information on LSP and to find out if your editor supports it, check out https://langserver.org/ diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/Rakefile b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/Rakefile index bc5594110..2fd9f859f 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/Rakefile +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/Rakefile @@ -16,4 +16,4 @@ task :integration_test do end end -task :default => [:spec, :integration_test] \ No newline at end of file +task :default => [:spec, :integration_test] diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/project.yml b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/project.yml index 6bda22291..00e395d0c 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/project.yml +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/project.yml @@ -28,7 +28,7 @@ :source: - src/** :support: - + :defines: # in order to add common defines: # 1) remove the trailing [] from the :common: section diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/src/display.c b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/src/display.c index 2f03449b0..797d46878 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/src/display.c +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/src/display.c @@ -4,4 +4,4 @@ void display_turnOffStatusLed(void) { printf("Display: Status LED off"); -} \ No newline at end of file +} diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/lib/fff_mock_generator.rb b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/lib/fff_mock_generator.rb index 9dc03a653..d439a8d7f 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/lib/fff_mock_generator.rb +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/lib/fff_mock_generator.rb @@ -90,7 +90,7 @@ class FffMockGenerator # In the init function, reset the FFF globals. These are used for things # like the call history. output.puts " FFF_RESET_HISTORY();" - + # Also, reset all of the fakes. if parsed_header[:functions] parsed_header[:functions].each do |function| diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_header_generator_spec.rb b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_header_generator_spec.rb index e6ac11dd0..09d317551 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_header_generator_spec.rb +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_header_generator_spec.rb @@ -254,7 +254,7 @@ describe "FffMockGenerator.create_mock_header" do ) end end - + context "when there is a function that returns a const int" do let(:mock_header){ parsed_header = {} diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_source_generator_spec.rb b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_source_generator_spec.rb index 364f8521e..7b7f04f58 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_source_generator_spec.rb +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_source_generator_spec.rb @@ -146,4 +146,4 @@ describe "FffMockGenerator.create_mock_source" do ) end end -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/header_generator.rb b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/header_generator.rb index cda278440..3b6fa7120 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/header_generator.rb +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/header_generator.rb @@ -48,4 +48,4 @@ def create_cmock_style_parsed_header(functions, typedefs = nil) end end parsed_header -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/src/fff_unity_helper.h b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/src/fff_unity_helper.h index de3db44aa..970ecbb35 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/src/fff_unity_helper.h +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/src/fff_unity_helper.h @@ -30,4 +30,4 @@ fff.call_history[order_], \ "Function " #function_ " not called in order " #order_ ) -#endif \ No newline at end of file +#endif diff --git a/test/unit-test/vendor/ceedling/plugins/gcov/assets/template.erb b/test/unit-test/vendor/ceedling/plugins/gcov/assets/template.erb index 5e5a1742b..266750497 100644 --- a/test/unit-test/vendor/ceedling/plugins/gcov/assets/template.erb +++ b/test/unit-test/vendor/ceedling/plugins/gcov/assets/template.erb @@ -12,4 +12,3 @@ BRANCHES: <%=sprintf(format_string, hash[:coverage][:branches])%>% % else BRANCHES: none % end - diff --git a/test/unit-test/vendor/ceedling/plugins/gcov/lib/reportinator_helper.rb b/test/unit-test/vendor/ceedling/plugins/gcov/lib/reportinator_helper.rb index 92617fba5..10a0a6c5c 100644 --- a/test/unit-test/vendor/ceedling/plugins/gcov/lib/reportinator_helper.rb +++ b/test/unit-test/vendor/ceedling/plugins/gcov/lib/reportinator_helper.rb @@ -5,7 +5,7 @@ class ReportinatorHelper def print_shell_result(shell_result) if !(shell_result.nil?) puts "Done in %.3f seconds." % shell_result[:time] - + if !(shell_result[:output].nil?) && (shell_result[:output].length > 0) puts shell_result[:output] end diff --git a/test/unit-test/vendor/ceedling/plugins/json_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/json_tests_report/README.md index 8e5a1e571..b383492e2 100644 --- a/test/unit-test/vendor/ceedling/plugins/json_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/json_tests_report/README.md @@ -3,8 +3,8 @@ json_tests_report ## Overview -The json_tests_report plugin creates a JSON file of test results, which is -handy for Continuous Integration build servers or as input into other +The json_tests_report plugin creates a JSON file of test results, which is +handy for Continuous Integration build servers or as input into other reporting tools. The JSON file is output to the appropriate `/artifacts/` directory (e.g. `artifacts/test/` for test tasks, `artifacts/gcov/` for gcov, or `artifacts/bullseye/` for bullseye runs). diff --git a/test/unit-test/vendor/ceedling/plugins/json_tests_report/lib/json_tests_report.rb b/test/unit-test/vendor/ceedling/plugins/json_tests_report/lib/json_tests_report.rb index e7023db7b..f09339ee2 100644 --- a/test/unit-test/vendor/ceedling/plugins/json_tests_report/lib/json_tests_report.rb +++ b/test/unit-test/vendor/ceedling/plugins/json_tests_report/lib/json_tests_report.rb @@ -33,7 +33,7 @@ class JsonTestsReport < Plugin "IgnoredTests" => write_tests(results[:ignores]), "Summary" => write_statistics(results[:counts]) } - + f << JSON.pretty_generate(json) end end @@ -62,7 +62,7 @@ class JsonTestsReport < Plugin results.each do |result| result[:collection].each do |item| @test_counter += 1 - retval << { + retval << { "file" => File.join(result[:source][:path], result[:source][:file]), "test" => item[:test] } diff --git a/test/unit-test/vendor/ceedling/plugins/module_generator/README.md b/test/unit-test/vendor/ceedling/plugins/module_generator/README.md index a3c2c7ad9..61cf45bd6 100644 --- a/test/unit-test/vendor/ceedling/plugins/module_generator/README.md +++ b/test/unit-test/vendor/ceedling/plugins/module_generator/README.md @@ -96,7 +96,7 @@ put that corporate copyright notice (or maybe a copyleft notice, if that's your ### Test Defines You can specify the "#ifdef TEST" at the top of the test files with a custom define. -This example will put a "#ifdef CEEDLING_TEST" at the top of the test files. +This example will put a "#ifdef CEEDLING_TEST" at the top of the test files. ``` :module_generator: @@ -115,5 +115,3 @@ Your options are as follows: - `:camel` - camelFilesAreSimilarButStartLow - `:snake` - snake_case_is_all_lower_and_uses_underscores - `:caps` - CAPS_FEELS_LIKE_YOU_ARE_SCREAMING - - diff --git a/test/unit-test/vendor/ceedling/plugins/module_generator/config/module_generator.yml b/test/unit-test/vendor/ceedling/plugins/module_generator/config/module_generator.yml index cdb2da2eb..b90afd0ff 100644 --- a/test/unit-test/vendor/ceedling/plugins/module_generator/config/module_generator.yml +++ b/test/unit-test/vendor/ceedling/plugins/module_generator/config/module_generator.yml @@ -1,4 +1,4 @@ :module_generator: :project_root: ./ :source_root: src/ - :test_root: test/ \ No newline at end of file + :test_root: test/ diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_gtestlike_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/stdout_gtestlike_tests_report/README.md index 9ab60847e..e95106ed1 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_gtestlike_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/stdout_gtestlike_tests_report/README.md @@ -3,8 +3,8 @@ ceedling-stdout-gtestlike-tests-report ## Overview -The stdout_gtestlike_tests_report replaces the normal ceedling "pretty" output with -a variant that resembles the output of gtest. This is most helpful when trying to +The stdout_gtestlike_tests_report replaces the normal ceedling "pretty" output with +a variant that resembles the output of gtest. This is most helpful when trying to integrate into an IDE or CI that is meant to work with google test. ## Setup diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_ide_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/stdout_ide_tests_report/README.md index ed6c65582..da04d1c14 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_ide_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/stdout_ide_tests_report/README.md @@ -3,7 +3,7 @@ ceedling-stdout-ide-tests-report ## Overview -The stdout_ide_tests_report replaces the normal ceedling "pretty" output with +The stdout_ide_tests_report replaces the normal ceedling "pretty" output with a simplified variant intended to be easily parseable. ## Setup diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/README.md index 7e1be2382..358aa93ab 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/README.md @@ -5,7 +5,7 @@ ceedling-pretty-tests-report The stdout_pretty_tests_report is the default output of ceedling. Instead of showing most of the raw output of CMock, Ceedling, etc., it shows a simplified -view. It also creates a nice summary at the end of execution which groups the +view. It also creates a nice summary at the end of execution which groups the results into ignored and failed tests. ## Setup diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/assets/template.erb b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/assets/template.erb index 52b29f7f0..1c025bf1b 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/assets/template.erb +++ b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/assets/template.erb @@ -56,4 +56,3 @@ IGNORED: <%=sprintf(format_string, ignored)%> No tests executed. % end - diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/lib/stdout_pretty_tests_report.rb b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/lib/stdout_pretty_tests_report.rb index 018388fc1..fd9589183 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/lib/stdout_pretty_tests_report.rb +++ b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/lib/stdout_pretty_tests_report.rb @@ -2,20 +2,20 @@ require 'ceedling/plugin' require 'ceedling/defaults' class StdoutPrettyTestsReport < Plugin - + def setup @result_list = [] @plugin_root = File.expand_path(File.join(File.dirname(__FILE__), '..')) template = @ceedling[:file_wrapper].read(File.join(@plugin_root, 'assets/template.erb')) @ceedling[:plugin_reportinator].register_test_results_template( template ) end - + def post_test_fixture_execute(arg_hash) return if not (arg_hash[:context] == TEST_SYM) - + @result_list << arg_hash[:result_file] end - + def post_build return if not (@ceedling[:task_invoker].test_invoked?) diff --git a/test/unit-test/vendor/ceedling/plugins/subprojects/README.md b/test/unit-test/vendor/ceedling/plugins/subprojects/README.md index e51a4e60e..ef4caa57b 100644 --- a/test/unit-test/vendor/ceedling/plugins/subprojects/README.md +++ b/test/unit-test/vendor/ceedling/plugins/subprojects/README.md @@ -1,9 +1,9 @@ ceedling-subprojects ==================== -Plugin for supporting subprojects that are built as static libraries. It continues to support -dependency tracking, without getting confused between your main project files and your -subproject files. It accepts different compiler flags and linker flags, allowing you to +Plugin for supporting subprojects that are built as static libraries. It continues to support +dependency tracking, without getting confused between your main project files and your +subproject files. It accepts different compiler flags and linker flags, allowing you to optimize for your situation. First, you're going to want to add the extension to your list of known extensions: @@ -13,12 +13,12 @@ First, you're going to want to add the extension to your list of known extension :subprojects: '.a' ``` -Define a new section called :subprojects. There, you can list as many subprojects -as you may need under the :paths key. For each, you specify a unique place to build +Define a new section called :subprojects. There, you can list as many subprojects +as you may need under the :paths key. For each, you specify a unique place to build and a unique name. ``` -:subprojects: +:subprojects: :paths: - :name: libprojectA :source: @@ -27,7 +27,7 @@ and a unique name. :include: - ./subprojectA/include/dir :build_root: ./subprojectA/build/dir - :defines: + :defines: - DEFINE_JUST_FOR_THIS_FILE - AND_ANOTHER - :name: libprojectB diff --git a/test/unit-test/vendor/ceedling/plugins/subprojects/subprojects.rake b/test/unit-test/vendor/ceedling/plugins/subprojects/subprojects.rake index 0025c3ecd..f80c812f3 100644 --- a/test/unit-test/vendor/ceedling/plugins/subprojects/subprojects.rake +++ b/test/unit-test/vendor/ceedling/plugins/subprojects/subprojects.rake @@ -73,6 +73,5 @@ SUBPROJECTS_PATHS.each do |subproj| task :directories => subproj_directories.clone # Finally, add the static library to our RELEASE build dependency list - task RELEASE_SYM => ["#{subproj_build_root}/#{subproj_name}#{EXTENSION_SUBPROJECTS}"] + task RELEASE_SYM => ["#{subproj_build_root}/#{subproj_name}#{EXTENSION_SUBPROJECTS}"] end - diff --git a/test/unit-test/vendor/ceedling/plugins/teamcity_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/teamcity_tests_report/README.md index 9fcda7d5b..2467ebe99 100644 --- a/test/unit-test/vendor/ceedling/plugins/teamcity_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/teamcity_tests_report/README.md @@ -3,7 +3,7 @@ ceedling-teamcity-tests-report ## Overview -The teamcity_tests_report replaces the normal ceedling "pretty" output with +The teamcity_tests_report replaces the normal ceedling "pretty" output with a version that has results tagged to be consumed with the teamcity CI server. ## Setup diff --git a/test/unit-test/vendor/ceedling/vendor/c_exception/lib/CException.c b/test/unit-test/vendor/ceedling/vendor/c_exception/lib/CException.c index fdff8f475..24b3b09e8 100644 --- a/test/unit-test/vendor/ceedling/vendor/c_exception/lib/CException.c +++ b/test/unit-test/vendor/ceedling/vendor/c_exception/lib/CException.c @@ -43,4 +43,3 @@ void Throw(CEXCEPTION_T ExceptionID) } <- finish off that local scope we created to have our own variables if (CExceptionFrames[CEXCEPTION_GET_ID].Exception != CEXCEPTION_NONE) <- start the actual 'catch' processing if we have an exception id saved away */ - diff --git a/test/unit-test/vendor/ceedling/vendor/c_exception/lib/meson.build b/test/unit-test/vendor/ceedling/vendor/c_exception/lib/meson.build index 2770122af..9694e51c7 100644 --- a/test/unit-test/vendor/ceedling/vendor/c_exception/lib/meson.build +++ b/test/unit-test/vendor/ceedling/vendor/c_exception/lib/meson.build @@ -6,6 +6,6 @@ # cexception_dir = include_directories('.') -cexception_lib = static_library(meson.project_name(), +cexception_lib = static_library(meson.project_name(), files('CException.c'), include_directories : cexception_dir) diff --git a/test/unit-test/vendor/ceedling/vendor/cmock/src/cmock.c b/test/unit-test/vendor/ceedling/vendor/cmock/src/cmock.c index 88f2c2b25..d8bdb1369 100644 --- a/test/unit-test/vendor/ceedling/vendor/cmock/src/cmock.c +++ b/test/unit-test/vendor/ceedling/vendor/cmock/src/cmock.c @@ -213,4 +213,3 @@ void CMock_Guts_MemFreeFinal(void) } #endif } - diff --git a/test/unit-test/vendor/ceedling/vendor/cmock/src/meson.build b/test/unit-test/vendor/ceedling/vendor/cmock/src/meson.build index c03c4e5bb..b3145c02e 100644 --- a/test/unit-test/vendor/ceedling/vendor/cmock/src/meson.build +++ b/test/unit-test/vendor/ceedling/vendor/cmock/src/meson.build @@ -6,7 +6,7 @@ # cmock_dir = include_directories('.') -cmock_lib = static_library(meson.project_name(), +cmock_lib = static_library(meson.project_name(), files('cmock.c'), dependencies: [unity_dep], include_directories: cmock_dir) diff --git a/test/unit-test/vendor/ceedling/vendor/diy/lib/diy.rb b/test/unit-test/vendor/ceedling/vendor/diy/lib/diy.rb index 581afc7e6..cbeb8267a 100644 --- a/test/unit-test/vendor/ceedling/vendor/diy/lib/diy.rb +++ b/test/unit-test/vendor/ceedling/vendor/diy/lib/diy.rb @@ -18,8 +18,8 @@ module DIY #:nodoc:# raise "Nil context hash" unless context_hash raise "Need a hash" unless context_hash.kind_of?(Hash) [ "[]", "keys" ].each do |mname| - unless extra_inputs.respond_to?(mname) - raise "Extra inputs must respond to hash-like [] operator and methods #keys and #each" + unless extra_inputs.respond_to?(mname) + raise "Extra inputs must respond to hash-like [] operator and methods #keys and #each" end end @@ -37,7 +37,7 @@ module DIY #:nodoc:# @cache = {} @cache['this_context'] = self end - + # Convenience: create a new DIY::Context by loading from a String (or open file handle.) def self.from_yaml(io_or_string, extra_inputs={}) @@ -51,7 +51,7 @@ module DIY #:nodoc:# self.from_yaml(File.read(fname), extra_inputs) end - # Return a reference to the object named. If necessary, the object will + # Return a reference to the object named. If necessary, the object will # be instantiated on first use. If the object is non-singleton, a new # object will be produced each time. def get_object(obj_name) @@ -77,7 +77,7 @@ module DIY #:nodoc:# end alias :[] :get_object - # Inject a named object into the Context. This must be done before the Context has instantiated the + # Inject a named object into the Context. This must be done before the Context has instantiated the # object in question. def set_object(obj_name,obj) key = obj_name.to_s @@ -108,9 +108,9 @@ module DIY #:nodoc:# @defs.keys.member?(key) or extra_inputs_has(key) end - # Every top level object in the Context is instantiated. This is especially useful for + # Every top level object in the Context is instantiated. This is especially useful for # systems that have "floating observers"... objects that are never directly accessed, who - # would thus never be instantiated by coincedence. This does not build any subcontexts + # would thus never be instantiated by coincedence. This does not build any subcontexts # that may exist. def build_everything @defs.keys.each { |k| self[k] } @@ -131,7 +131,7 @@ module DIY #:nodoc:# # we modify the info hash below so it's important to have a new # instance to play with info = info.dup if info - + # see if we are building a factory if info and info.has_key?('builds') unless info.has_key?('auto_require') @@ -150,21 +150,21 @@ module DIY #:nodoc:# name = name.to_s case name - when /^\+/ + when /^\+/ # subcontext @sub_context_defs[name.gsub(/^\+/,'')] = info - + when /^using_namespace/ # namespace: use a module(s) prefix for the classname of contained object defs # NOTE: namespacing is NOT scope... it's just a convenient way to setup class names for a group of objects. get_defs_from info, parse_namespace(name) when /^method\s/ key_name = name.gsub(/^method\s/, "") - @defs[key_name] = MethodDef.new(:name => key_name, - :object => info['object'], + @defs[key_name] = MethodDef.new(:name => key_name, + :object => info['object'], :method => info['method'], :attach => info['attach']) - else + else # Normal object def info ||= {} if extra_inputs_has(name) @@ -173,14 +173,14 @@ module DIY #:nodoc:# unless info.has_key?('auto_require') info['auto_require'] = self.class.auto_require end - if namespace + if namespace if info['class'] info['class'] = namespace.build_classname(info['class']) else info['class'] = namespace.build_classname(name) end end - + @defs[name] = ObjectDef.new(:name => name, :info => info) end @@ -191,10 +191,10 @@ module DIY #:nodoc:# method_definition = @defs[key] object = get_object(method_definition.object) method = object.method(method_definition.method) - + unless method_definition.attach.nil? instance_var_name = "@__diy_#{method_definition.object}" - + method_definition.attach.each do |object_key| get_object(object_key).instance_eval do instance_variable_set(instance_var_name, object) @@ -202,14 +202,14 @@ module DIY #:nodoc:# #{instance_var_name}.#{method_definition.method}(*args) end| end - end + end end - + return method rescue Exception => oops build_and_raise_construction_error(key, oops) end - + def construct_object(key) # Find the object definition obj_def = @defs[key] @@ -242,13 +242,13 @@ module DIY #:nodoc:# rescue Exception => oops build_and_raise_construction_error(key, oops) end - + def build_and_raise_construction_error(key, oops) cerr = ConstructionError.new(key,oops) cerr.set_backtrace(oops.backtrace) raise cerr end - + def get_class_for_name_with_module_delimeters(class_name) class_name.split(/::/).inject(Object) do |mod,const_name| mod.const_get(const_name) end end @@ -264,7 +264,7 @@ module DIY #:nodoc:# Namespace.new(str) end end - + class Namespace #:nodoc:# def initialize(str) # 'using_namespace Animal Reptile' @@ -292,15 +292,15 @@ module DIY #:nodoc:# @name = obj_name end end - + class MethodDef #:nodoc: attr_accessor :name, :object, :method, :attach - + def initialize(opts) @name, @object, @method, @attach = opts[:name], opts[:object], opts[:method], opts[:attach] end end - + class ObjectDef #:nodoc: attr_accessor :name, :class_name, :library, :components def initialize(opts) @@ -330,7 +330,7 @@ module DIY #:nodoc:# # Use Class Directly @use_class_directly = info.delete 'use_class_directly' - + # Auto-compose compose = info.delete 'compose' if compose @@ -380,7 +380,7 @@ module DIY #:nodoc:# object_name = object_name cause = cause m = "Failed to construct '#{object_name}'" - if cause + if cause m << "\n ...caused by:\n >>> #{cause}" end super m @@ -388,11 +388,11 @@ module DIY #:nodoc:# end class NamespaceError < RuntimeError #:nodoc:# - end + end module Infl #:nodoc:# # Ganked this from Inflector: - def self.camelize(lower_case_and_underscored_word) + def self.camelize(lower_case_and_underscored_word) lower_case_and_underscored_word.to_s.gsub(/\/(.?)/) { "::" + $1.upcase }.gsub(/(^|_)(.)/) { $2.upcase } end # Ganked this from Inflector: diff --git a/test/unit-test/vendor/ceedling/vendor/diy/lib/diy/factory.rb b/test/unit-test/vendor/ceedling/vendor/diy/lib/diy/factory.rb index d2566c5d1..8f00e5e45 100644 --- a/test/unit-test/vendor/ceedling/vendor/diy/lib/diy/factory.rb +++ b/test/unit-test/vendor/ceedling/vendor/diy/lib/diy/factory.rb @@ -1,7 +1,7 @@ module DIY #:nodoc:# class FactoryDef #:nodoc: attr_accessor :name, :target, :class_name, :library - + def initialize(opts) @name, @target, @library, @auto_require = opts[:name], opts[:target], opts[:library], opts[:auto_require] @@ -10,7 +10,7 @@ module DIY #:nodoc:# @library ||= Infl.underscore(@class_name) if @auto_require end end - + class Context def construct_factory(key) factory_def = @defs[key] @@ -33,4 +33,3 @@ module DIY #:nodoc:# end end end - diff --git a/test/unit-test/vendor/ceedling/vendor/unity/auto/generate_config.yml b/test/unit-test/vendor/ceedling/vendor/unity/auto/generate_config.yml index 4a5e47424..c7679aefc 100644 --- a/test/unit-test/vendor/ceedling/vendor/unity/auto/generate_config.yml +++ b/test/unit-test/vendor/ceedling/vendor/unity/auto/generate_config.yml @@ -18,7 +18,7 @@ - Defs.h - Board.h - Exception.h - :boilerplates: + :boilerplates: #these are inserted at the top of generated files. #just comment out or remove if not desired. #use %1$s where you would like the file name to appear (path/extension not included) diff --git a/test/unit-test/vendor/ceedling/vendor/unity/src/meson.build b/test/unit-test/vendor/ceedling/vendor/unity/src/meson.build index 1c7b426ff..5acd51a9b 100644 --- a/test/unit-test/vendor/ceedling/vendor/unity/src/meson.build +++ b/test/unit-test/vendor/ceedling/vendor/unity/src/meson.build @@ -6,6 +6,6 @@ # unity_dir = include_directories('.') -unity_lib = static_library(meson.project_name(), +unity_lib = static_library(meson.project_name(), files('unity.c'), include_directories: unity_dir) diff --git a/tools/build_board.py b/tools/build_board.py index 4593dafa5..13376d126 100644 --- a/tools/build_board.py +++ b/tools/build_board.py @@ -56,7 +56,7 @@ if __name__ == '__main__': result = pool.starmap(build_utils.build_example, pool_args) # sum all element of same index (column sum) result = list(map(sum, list(zip(*result)))) - + # add to total result total_result = list(map(lambda x, y: x + y, total_result, result)) diff --git a/tools/build_utils.py b/tools/build_utils.py index de9052d2d..d0ef52717 100644 --- a/tools/build_utils.py +++ b/tools/build_utils.py @@ -124,4 +124,4 @@ def build_size(make_cmd): sram_size = int(size_list[1]) + int(size_list[2]) return (flash_size, sram_size) - return (0, 0) \ No newline at end of file + return (0, 0) diff --git a/tools/iar_template.ipcf b/tools/iar_template.ipcf index ba54fe057..d243aab0a 100644 --- a/tools/iar_template.ipcf +++ b/tools/iar_template.ipcf @@ -141,5 +141,5 @@ $TUSB_DIR$/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_IAR.c - + diff --git a/tools/mksunxi.py b/tools/mksunxi.py index 04786f429..fd8557cfc 100644 --- a/tools/mksunxi.py +++ b/tools/mksunxi.py @@ -45,4 +45,4 @@ if __name__ == "__main__": if len(sys.argv) != 3: print("Usage: mksunxi.py input.bin output.bin") exit(1) - exit(process_file(sys.argv[1], sys.argv[2])) \ No newline at end of file + exit(process_file(sys.argv[1], sys.argv[2])) diff --git a/tools/pcapng_to_corpus.py b/tools/pcapng_to_corpus.py index 78b1f77a2..9c31365eb 100755 --- a/tools/pcapng_to_corpus.py +++ b/tools/pcapng_to_corpus.py @@ -16,7 +16,7 @@ def extract_packets(pcap_file): def build_corpus_zip(zip_file_output, packets): """Builds a zip file with a file per packet - + The structure of this zip corpus is a simple content addressable storage i.e. seed_file_name == sha256_digest(packet). """ @@ -25,7 +25,7 @@ def build_corpus_zip(zip_file_output, packets): hash = hashlib.sha256(packet).hexdigest() if hash not in out.namelist(): out.writestr(hash, packet) - + def main(pcap_file, output_zip_file): packets = extract_packets(pcap_file) @@ -35,12 +35,10 @@ if __name__ == "__main__": parser = argparse.ArgumentParser( prog = "pcapng_to_corpus.py", description="""Converts a wireshark capture to a zip of binary packet - files suitable for an oss-fuzz corpus. In the case the - zip corpus already exists, this script will modify + files suitable for an oss-fuzz corpus. In the case the + zip corpus already exists, this script will modify the zip file in place adding seed entries.""") parser.add_argument('pcapng_capture_file') parser.add_argument('oss_fuzz_corpus_zip') args = parser.parse_args() main(args.pcapng_capture_file, args.oss_fuzz_corpus_zip) - - diff --git a/tools/usb_drivers/tinyusb_win_usbser.inf b/tools/usb_drivers/tinyusb_win_usbser.inf index e7f7a9b22..659f048ae 100644 --- a/tools/usb_drivers/tinyusb_win_usbser.inf +++ b/tools/usb_drivers/tinyusb_win_usbser.inf @@ -105,4 +105,4 @@ DRIVERFILENAME ="usbser" MFGNAME="tinyusb.org" INSTDISK="tinyusb CDC Driver" DESCRIPTION="tinyusb Serial" -SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file +SERVICE="USB RS-232 Emulation Driver" -- cgit v1.3.1 From b13b95a6705348947aa2117423788b5dc2289047 Mon Sep 17 00:00:00 2001 From: Bob Paddock Date: Mon, 16 Jan 2023 15:17:11 -0500 Subject: Document that support for the FRDM-K32L2A4S has been added. --- docs/reference/supported.rst | 1 + 1 file changed, 1 insertion(+) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index b3f3f41d3..b1e0c0a68 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -253,6 +253,7 @@ Kinetis ^^^^^^^ - `Freedom FRDM-KL25Z `__ +- `Freedom FRDM-K32L2A `__ - `Freedom FRDM-K32L2B3 `__ - `KUIIC `__ -- cgit v1.3.1 From 1fc203b085ba6ce2edef90e9dcc75ec72eaeb314 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 18 Mar 2023 19:50:24 +0700 Subject: more update to kinetis bsp --- docs/reference/supported.rst | 2 +- hw/bsp/board_mcu.h | 14 +- hw/bsp/kinetis/boards/frdm_k32l2a4s/board.h | 58 ------ hw/bsp/kinetis/boards/frdm_k32l2a4s/board.mk | 26 --- .../kinetis/boards/frdm_k32l2a4s/frdm_k32l2a4s.c | 171 ---------------- hw/bsp/kinetis/boards/frdm_k32l2b/board.h | 56 ------ hw/bsp/kinetis/boards/frdm_k32l2b/board.mk | 26 --- hw/bsp/kinetis/boards/frdm_k32l2b/frdm_k32l2b.c | 140 ------------- hw/bsp/kinetis/boards/frdm_kl25z/board.mk | 31 --- hw/bsp/kinetis/boards/frdm_kl25z/frdm_kl25z.c | 176 ----------------- hw/bsp/kinetis/family.mk | 46 ----- hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.h | 58 ++++++ hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.mk | 26 +++ .../boards/frdm_k32l2a4s/frdm_k32l2a4s.c | 171 ++++++++++++++++ hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.h | 56 ++++++ hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.mk | 26 +++ .../kinetis_k32/boards/frdm_k32l2b/frdm_k32l2b.c | 140 +++++++++++++ .../boards/kuiic/K32L2B31xxxxA_flash.ld | 216 +++++++++++++++++++++ hw/bsp/kinetis_k32/boards/kuiic/board.h | 45 +++++ hw/bsp/kinetis_k32/boards/kuiic/board.mk | 26 +++ hw/bsp/kinetis_k32/boards/kuiic/kuiic.c | 203 +++++++++++++++++++ hw/bsp/kinetis_k32/family.mk | 32 +++ hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk | 20 ++ hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c | 176 +++++++++++++++++ hw/bsp/kinetis_kl/family.mk | 37 ++++ hw/bsp/kuiic/K32L2B31xxxxA_flash.ld | 216 --------------------- hw/bsp/kuiic/board.h | 45 ----- hw/bsp/kuiic/board.mk | 52 ----- hw/bsp/kuiic/kuiic.c | 203 ------------------- src/common/tusb_mcu.h | 2 +- src/portable/nxp/khci/hcd_khci.c | 17 +- src/tusb_option.h | 8 +- 32 files changed, 1254 insertions(+), 1267 deletions(-) delete mode 100644 hw/bsp/kinetis/boards/frdm_k32l2a4s/board.h delete mode 100644 hw/bsp/kinetis/boards/frdm_k32l2a4s/board.mk delete mode 100644 hw/bsp/kinetis/boards/frdm_k32l2a4s/frdm_k32l2a4s.c delete mode 100644 hw/bsp/kinetis/boards/frdm_k32l2b/board.h delete mode 100644 hw/bsp/kinetis/boards/frdm_k32l2b/board.mk delete mode 100644 hw/bsp/kinetis/boards/frdm_k32l2b/frdm_k32l2b.c delete mode 100644 hw/bsp/kinetis/boards/frdm_kl25z/board.mk delete mode 100644 hw/bsp/kinetis/boards/frdm_kl25z/frdm_kl25z.c delete mode 100644 hw/bsp/kinetis/family.mk create mode 100644 hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.h create mode 100644 hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.mk create mode 100644 hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/frdm_k32l2a4s.c create mode 100644 hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.h create mode 100644 hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.mk create mode 100644 hw/bsp/kinetis_k32/boards/frdm_k32l2b/frdm_k32l2b.c create mode 100644 hw/bsp/kinetis_k32/boards/kuiic/K32L2B31xxxxA_flash.ld create mode 100644 hw/bsp/kinetis_k32/boards/kuiic/board.h create mode 100644 hw/bsp/kinetis_k32/boards/kuiic/board.mk create mode 100644 hw/bsp/kinetis_k32/boards/kuiic/kuiic.c create mode 100644 hw/bsp/kinetis_k32/family.mk create mode 100644 hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk create mode 100644 hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c create mode 100644 hw/bsp/kinetis_kl/family.mk delete mode 100644 hw/bsp/kuiic/K32L2B31xxxxA_flash.ld delete mode 100644 hw/bsp/kuiic/board.h delete mode 100644 hw/bsp/kuiic/board.mk delete mode 100644 hw/bsp/kuiic/kuiic.c (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index b1e0c0a68..a5d055893 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -253,7 +253,7 @@ Kinetis ^^^^^^^ - `Freedom FRDM-KL25Z `__ -- `Freedom FRDM-K32L2A `__ +- `Freedom FRDM-K32L2A4S `__ - `Freedom FRDM-K32L2B3 `__ - `KUIIC `__ diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index 920e7d0d9..cd195a19b 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -39,15 +39,15 @@ //--------------------------------------------------------------------+ // Include order follows OPT_MCU_ number -#if CFG_TUSB_MCU == OPT_MCU_LPC11UXX || CFG_TUSB_MCU == OPT_MCU_LPC13XX || \ - CFG_TUSB_MCU == OPT_MCU_LPC15XX || CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || \ - CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC18XX || \ - CFG_TUSB_MCU == OPT_MCU_LPC40XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX +#if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) || \ + TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC18XX) || \ + TU_CHECK_MCU(OPT_MCU_LPC40XX, OPT_MCU_LPC43XX) #include "chip.h" -#elif CFG_TUSB_MCU == OPT_MCU_LPC51UXX || CFG_TUSB_MCU == OPT_MCU_LPC54XXX || \ - CFG_TUSB_MCU == OPT_MCU_LPC55XX || CFG_TUSB_MCU == OPT_MCU_MKL25ZXX || \ - CFG_TUSB_MCU == OPT_MCU_K32L2AXX || OPT_MCU_K32L2BXX +#elif TU_CHECK_MCU(OPT_MCU_LPC51UXX, OPT_MCU_LPC54XXX, OPT_MCU_LPC55XX) + #include "fsl_device_registers.h" + +#elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32) #include "fsl_device_registers.h" #elif CFG_TUSB_MCU == OPT_MCU_NRF5X diff --git a/hw/bsp/kinetis/boards/frdm_k32l2a4s/board.h b/hw/bsp/kinetis/boards/frdm_k32l2a4s/board.h deleted file mode 100644 index b1f38c997..000000000 --- a/hw/bsp/kinetis/boards/frdm_k32l2a4s/board.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "fsl_device_registers.h" - -// LED -// The Red LED is on PTE29. -// The Green LED is on PTC4. -// The Blue LED is on PTE31. -#define LED_PIN_CLOCK kCLOCK_PortC -#define LED_GPIO GPIOC -#define LED_PORT PORTC -#define LED_PIN 4 -#define LED_STATE_ON 0 - -// SW3 button1 -#define BUTTON_PIN_CLOCK kCLOCK_PortE -#define BUTTON_GPIO GPIOE -#define BUTTON_PORT PORTE -#define BUTTON_PIN 4 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART0 -#define UART_PIN_CLOCK kCLOCK_PortB -#define UART_PIN_GPIO GPIOB -#define UART_PIN_PORT PORTB -#define UART_PIN_RX 16u -#define UART_PIN_TX 17u - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/kinetis/boards/frdm_k32l2a4s/board.mk b/hw/bsp/kinetis/boards/frdm_k32l2a4s/board.mk deleted file mode 100644 index 723fb3893..000000000 --- a/hw/bsp/kinetis/boards/frdm_k32l2a4s/board.mk +++ /dev/null @@ -1,26 +0,0 @@ -SDK_DIR = hw/mcu/nxp/mcux-sdk -MCU = K32L2A41A -MCU_DIR = $(SDK_DIR)/devices/$(MCU) - -CFLAGS += \ - -mcpu=cortex-m0plus \ - -DCPU_K32L2A41VLH1A \ - -DCFG_TUSB_MCU=OPT_MCU_K32L2AXX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-qual - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/K32L2A41xxxxA_flash.ld - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = K32L2A41xxxxA - -# For flash-pyocd target -PYOCD_TARGET = K32L2A - -# flash using pyocd -flash: flash-pyocd diff --git a/hw/bsp/kinetis/boards/frdm_k32l2a4s/frdm_k32l2a4s.c b/hw/bsp/kinetis/boards/frdm_k32l2a4s/frdm_k32l2a4s.c deleted file mode 100644 index 80830163b..000000000 --- a/hw/bsp/kinetis/boards/frdm_k32l2a4s/frdm_k32l2a4s.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * Copyright (c) 2020, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "board.h" -#include "fsl_gpio.h" -#include "fsl_port.h" -#include "fsl_clock.h" -#include "fsl_lpuart.h" - -#include "clock_config.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -void board_init(void) -{ - /* Enable port clocks for UART/LED/Button pins */ - CLOCK_EnableClock(UART_PIN_CLOCK); - CLOCK_EnableClock(LED_PIN_CLOCK); - CLOCK_EnableClock(BUTTON_PIN_CLOCK); - - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; - GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); - PORT_SetPinMux(LED_PORT, LED_PIN, kPORT_MuxAsGpio); - - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; - GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); - const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_OpenDrainDisable, - kPORT_LowDriveStrength, - kPORT_MuxAsGpio, - kPORT_UnlockRegister - }; - PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); - - /* - Enable LPUART0 clock and configure port pins. - FIR clock is being used so the USB examples work. - */ - PCC_LPUART0 = 0U; /* Clock must be off to set PCS */ - PCC_LPUART0 = PCC_CLKCFG_PCS( 3U ); /* Select the clock. 1:OSCCLK/Bus Clock, 2:Slow IRC, 3: Fast IRC, 6: System PLL */ - PCC_LPUART0 |= PCC_CLKCFG_CGC( 1U ); /* Enable LPUART */ - - /* PORTB16 (pin 62) is configured as LPUART0_RX */ - gpio_pin_config_t const lpuart_config_rx = { kGPIO_DigitalInput, 0 }; - GPIO_PinInit(UART_PIN_GPIO, UART_PIN_RX, &lpuart_config_rx); - const port_pin_config_t UART_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_OpenDrainDisable, - kPORT_LowDriveStrength, - kPORT_MuxAsGpio, - kPORT_UnlockRegister - }; - PORT_SetPinConfig(UART_PIN_PORT, UART_PIN_RX, &UART_CFG); - PORT_SetPinMux( UART_PIN_PORT, UART_PIN_RX, kPORT_MuxAlt3); - - /* PORTB17 (pin 63) is configured as LPUART0_TX */ - gpio_pin_config_t const lpuart_config_tx = { kGPIO_DigitalOutput, 0 }; - GPIO_PinInit( UART_PIN_GPIO, UART_PIN_TX, &lpuart_config_tx); - PORT_SetPinMux( UART_PIN_PORT, UART_PIN_TX, kPORT_MuxAlt3); - - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - lpuart_config_t uart_config; - LPUART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_ScgFircClk)); - - // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_IpSrcFircAsync, 48000000U); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ -#if 0 /* - Use this version if want the LED to blink during BOARD=board_test, - without having to hit a key. - */ - if( 0U != (kLPUART_RxDataRegFullFlag & LPUART_GetStatusFlags( UART_PORT )) ) - { - LPUART_ReadBlocking(UART_PORT, buf, len); - return len; - } - - return( 0 ); -#else /* Wait for 'len' characters to come in */ - - LPUART_ReadBlocking(UART_PORT, buf, len); - return len; - -#endif -} - -int board_uart_write(void const * buf, int len) -{ - LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/kinetis/boards/frdm_k32l2b/board.h b/hw/bsp/kinetis/boards/frdm_k32l2b/board.h deleted file mode 100644 index 8d21fdcd4..000000000 --- a/hw/bsp/kinetis/boards/frdm_k32l2b/board.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "fsl_device_registers.h" - -// LED -#define LED_PIN_CLOCK kCLOCK_PortD -#define LED_GPIO GPIOD -#define LED_PORT PORTD -#define LED_PIN 5 -#define LED_STATE_ON 0 - -// SW3 button1 -#define BUTTON_PIN_CLOCK kCLOCK_PortC -#define BUTTON_GPIO GPIOC -#define BUTTON_PORT PORTC -#define BUTTON_PIN 3 -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT LPUART0 -#define UART_PIN_CLOCK kCLOCK_PortA -#define UART_PIN_PORT PORTA -#define UART_PIN_RX 1u -#define UART_PIN_TX 2u -#define SOPT5_LPUART0RXSRC_LPUART_RX 0x00u /*!<@brief LPUART0 Receive Data Source Select: LPUART_RX pin */ -#define SOPT5_LPUART0TXSRC_LPUART_TX 0x00u /*!<@brief LPUART0 Transmit Data Source Select: LPUART0_TX pin */ - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/kinetis/boards/frdm_k32l2b/board.mk b/hw/bsp/kinetis/boards/frdm_k32l2b/board.mk deleted file mode 100644 index 66d408c67..000000000 --- a/hw/bsp/kinetis/boards/frdm_k32l2b/board.mk +++ /dev/null @@ -1,26 +0,0 @@ -SDK_DIR = hw/mcu/nxp/mcux-sdk -MCU = K32L2B31A -MCU_DIR = $(SDK_DIR)/devices/$(MCU) - -CFLAGS += \ - -mcpu=cortex-m0plus \ - -DCPU_K32L2B31VLH0A \ - -DCFG_TUSB_MCU=OPT_MCU_K32L2BXX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/K32L2B31xxxxA_flash.ld - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = K32L2B31xxxxA - -# For flash-pyocd target -PYOCD_TARGET = K32L2B - -# flash using pyocd -flash: flash-pyocd diff --git a/hw/bsp/kinetis/boards/frdm_k32l2b/frdm_k32l2b.c b/hw/bsp/kinetis/boards/frdm_k32l2b/frdm_k32l2b.c deleted file mode 100644 index 1566b4e2e..000000000 --- a/hw/bsp/kinetis/boards/frdm_k32l2b/frdm_k32l2b.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * Copyright (c) 2020, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board.h" -#include "board.h" -#include "fsl_gpio.h" -#include "fsl_port.h" -#include "fsl_clock.h" -#include "fsl_lpuart.h" - -#include "clock_config.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -void board_init(void) -{ - /* Enable port clocks for UART/LED/Button pins */ - CLOCK_EnableClock(UART_PIN_CLOCK); - CLOCK_EnableClock(LED_PIN_CLOCK); - CLOCK_EnableClock(BUTTON_PIN_CLOCK); - - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; - GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); - PORT_SetPinMux(LED_PORT, LED_PIN, kPORT_MuxAsGpio); - - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; - GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); - const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, - kPORT_MuxAsGpio - }; - PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); - - /* PORTA1 (pin 23) is configured as LPUART0_RX */ - PORT_SetPinMux(PORTA, 1U, kPORT_MuxAlt2); - /* PORTA2 (pin 24) is configured as LPUART0_TX */ - PORT_SetPinMux(PORTA, 2U, kPORT_MuxAlt2); - - SIM->SOPT5 = ((SIM->SOPT5 & - /* Mask bits to zero which are setting */ - (~(SIM_SOPT5_LPUART0TXSRC_MASK | SIM_SOPT5_LPUART0RXSRC_MASK))) - /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ - | SIM_SOPT5_LPUART0TXSRC(SOPT5_LPUART0TXSRC_LPUART_TX) - /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ - | SIM_SOPT5_LPUART0RXSRC(SOPT5_LPUART0RXSRC_LPUART_RX)); - - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - CLOCK_SetLpuart0Clock(1); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - lpuart_config_t uart_config; - LPUART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); - - // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPUART_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/kinetis/boards/frdm_kl25z/board.mk b/hw/bsp/kinetis/boards/frdm_kl25z/board.mk deleted file mode 100644 index 5ce6cd51e..000000000 --- a/hw/bsp/kinetis/boards/frdm_kl25z/board.mk +++ /dev/null @@ -1,31 +0,0 @@ -SDK_DIR = hw/mcu/nxp/nxp_sdk -MCU = MKL25Z4 -MCU_DIR = $(SDK_DIR)/devices/$(MCU) - -CFLAGS += \ - -mcpu=cortex-m0plus \ - -DCPU_MKL25Z128VLK4 \ - -DCFG_TUSB_MCU=OPT_MCU_MKL25ZXX \ - -DCFG_EXAMPLE_VIDEO_READONLY - -LDFLAGS += \ - -Wl,--defsym,__stack_size__=0x400 \ - -Wl,--defsym,__heap_size__=0 - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=format -Wno-error=redundant-decls - -# All source paths should be relative to the top level. -LD_FILE = $(MCU_DIR)/gcc/MKL25Z128xxx4_flash.ld - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = MKL25Z128xxx4 - -# For flash-pyocd target -PYOCD_TARGET = mkl25zl128 - -# flash using pyocd -flash: flash-jlink diff --git a/hw/bsp/kinetis/boards/frdm_kl25z/frdm_kl25z.c b/hw/bsp/kinetis/boards/frdm_kl25z/frdm_kl25z.c deleted file mode 100644 index 46f85f6a5..000000000 --- a/hw/bsp/kinetis/boards/frdm_kl25z/frdm_kl25z.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * Copyright (c) 2020, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "fsl_device_registers.h" -#include "fsl_gpio.h" -#include "fsl_port.h" -#include "fsl_clock.h" -#include "fsl_lpsci.h" - -#include "clock_config.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -// LED -#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 -#define LED_PORT GPIOB -#define LED_PIN_CLOCK kCLOCK_PortB -#define LED_PIN_PORT PORTB -#define LED_PIN 19U -#define LED_PIN_FUNCTION kPORT_MuxAsGpio -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN_CLOCK kCLOCK_PortC -#define BUTTON_PIN_PORT PORTC -#define BUTTON_PIN 9U -#define BUTTON_PIN_FUNCTION kPORT_MuxAsGpio -#define BUTTON_STATE_ACTIVE 0 - -// UART -#define UART_PORT UART0 -#define UART_PIN_CLOCK kCLOCK_PortA -#define UART_PIN_PORT PORTA -#define UART_PIN_RX 1u -#define UART_PIN_TX 2u -#define UART_PIN_FUNCTION kPORT_MuxAlt2 -#define SOPT5_UART0RXSRC_UART_RX 0x00u /*!< UART0 receive data source select: UART0_RX pin */ -#define SOPT5_UART0TXSRC_UART_TX 0x00u /*!< UART0 transmit data source select: UART0_TX pin */ - -const uint8_t dcd_data[] = { 0x00 }; - -void board_init(void) -{ - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - // LED - CLOCK_EnableClock(LED_PIN_CLOCK); - PORT_SetPinMux(LED_PIN_PORT, LED_PIN, LED_PIN_FUNCTION); - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; - GPIO_PinInit(LED_PORT, LED_PIN, &led_config); - board_led_write(false); - -#if defined(BUTTON_PORT) && defined(BUTTON_PIN) - // Button - CLOCK_EnableClock(BUTTON_PIN_CLOCK); - port_pin_config_t button_port = { - .pullSelect = kPORT_PullUp, - .mux = BUTTON_PIN_FUNCTION, - }; - PORT_SetPinConfig(BUTTON_PIN_PORT, BUTTON_PIN, &button_port); - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; - GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); -#endif - - // UART - CLOCK_EnableClock(UART_PIN_CLOCK); - PORT_SetPinMux(UART_PIN_PORT, UART_PIN_RX, UART_PIN_FUNCTION); - PORT_SetPinMux(UART_PIN_PORT, UART_PIN_TX, UART_PIN_FUNCTION); - SIM->SOPT5 = ((SIM->SOPT5 & - (~(SIM_SOPT5_UART0TXSRC_MASK | SIM_SOPT5_UART0RXSRC_MASK))) - | SIM_SOPT5_UART0TXSRC(SOPT5_UART0TXSRC_UART_TX) - | SIM_SOPT5_UART0RXSRC(SOPT5_UART0RXSRC_UART_RX) - ); - - lpsci_config_t uart_config; - CLOCK_SetLpsci0Clock(1); - LPSCI_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPSCI_Init(UART_PORT, &uart_config, CLOCK_GetPllFllSelClkFreq()); - - // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcPll0, CLOCK_GetFreq(kCLOCK_PllFllSelClk)); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_WritePinOutput(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ -#if defined(BUTTON_PORT) && defined(BUTTON_PIN) - return BUTTON_STATE_ACTIVE == GPIO_ReadPinInput(BUTTON_PORT, BUTTON_PIN); -#endif - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPSCI_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPSCI_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/kinetis/family.mk b/hw/bsp/kinetis/family.mk deleted file mode 100644 index 65767988a..000000000 --- a/hw/bsp/kinetis/family.mk +++ /dev/null @@ -1,46 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/nxp_sdk hw/mcu/nxp/mcux-sdk - -include $(TOP)/$(BOARD_PATH)/board.mk - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -SRC_C += \ - src/portable/nxp/khci/dcd_khci.c \ - src/portable/nxp/khci/hcd_khci.c \ - $(MCU_DIR)/system_$(MCU).c \ - $(MCU_DIR)/project_template/clock_config.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(SDK_DIR)/CMSIS/Include \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/project_template \ - $(TOP)/$(MCU_DIR)/drivers - -# mcu-sdk has different driver layout than previous old sdk -ifeq ($(SDK_DIR),hw/mcu/nxp/mcux-sdk) - -SRC_C += \ - $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c - -INC += \ - $(TOP)/$(SDK_DIR)/drivers/smc \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/gpio \ - $(TOP)/$(SDK_DIR)/drivers/port \ - $(TOP)/$(SDK_DIR)/drivers/lpuart \ - -else - -SRC_C += \ - $(MCU_DIR)/drivers/fsl_gpio.c \ - $(MCU_DIR)/drivers/fsl_lpsci.c \ - $(MCU_DIR)/drivers/fsl_uart.c - -endif - -SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.h b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.h new file mode 100644 index 000000000..b1f38c997 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.h @@ -0,0 +1,58 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "fsl_device_registers.h" + +// LED +// The Red LED is on PTE29. +// The Green LED is on PTC4. +// The Blue LED is on PTE31. +#define LED_PIN_CLOCK kCLOCK_PortC +#define LED_GPIO GPIOC +#define LED_PORT PORTC +#define LED_PIN 4 +#define LED_STATE_ON 0 + +// SW3 button1 +#define BUTTON_PIN_CLOCK kCLOCK_PortE +#define BUTTON_GPIO GPIOE +#define BUTTON_PORT PORTE +#define BUTTON_PIN 4 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART0 +#define UART_PIN_CLOCK kCLOCK_PortB +#define UART_PIN_GPIO GPIOB +#define UART_PIN_PORT PORTB +#define UART_PIN_RX 16u +#define UART_PIN_TX 17u + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.mk b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.mk new file mode 100644 index 000000000..d96ab58b8 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.mk @@ -0,0 +1,26 @@ +MCU = K32L2A41A + +CFLAGS += \ + -mcpu=cortex-m0plus \ + -DCPU_K32L2A41VLH1A \ + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-qual + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/K32L2A41xxxxA_flash.ld + +SRC_C += \ + $(MCU_DIR)/project_template/clock_config.c \ + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = K32L2A41xxxxA + +# For flash-pyocd target +PYOCD_TARGET = K32L2A + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/frdm_k32l2a4s.c b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/frdm_k32l2a4s.c new file mode 100644 index 000000000..80830163b --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/frdm_k32l2a4s.c @@ -0,0 +1,171 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "board.h" +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +void board_init(void) +{ + /* Enable port clocks for UART/LED/Button pins */ + CLOCK_EnableClock(UART_PIN_CLOCK); + CLOCK_EnableClock(LED_PIN_CLOCK); + CLOCK_EnableClock(BUTTON_PIN_CLOCK); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; + GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); + PORT_SetPinMux(LED_PORT, LED_PIN, kPORT_MuxAsGpio); + + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); + const port_pin_config_t BUTTON_CFG = { + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_OpenDrainDisable, + kPORT_LowDriveStrength, + kPORT_MuxAsGpio, + kPORT_UnlockRegister + }; + PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); + + /* + Enable LPUART0 clock and configure port pins. + FIR clock is being used so the USB examples work. + */ + PCC_LPUART0 = 0U; /* Clock must be off to set PCS */ + PCC_LPUART0 = PCC_CLKCFG_PCS( 3U ); /* Select the clock. 1:OSCCLK/Bus Clock, 2:Slow IRC, 3: Fast IRC, 6: System PLL */ + PCC_LPUART0 |= PCC_CLKCFG_CGC( 1U ); /* Enable LPUART */ + + /* PORTB16 (pin 62) is configured as LPUART0_RX */ + gpio_pin_config_t const lpuart_config_rx = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(UART_PIN_GPIO, UART_PIN_RX, &lpuart_config_rx); + const port_pin_config_t UART_CFG = { + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_OpenDrainDisable, + kPORT_LowDriveStrength, + kPORT_MuxAsGpio, + kPORT_UnlockRegister + }; + PORT_SetPinConfig(UART_PIN_PORT, UART_PIN_RX, &UART_CFG); + PORT_SetPinMux( UART_PIN_PORT, UART_PIN_RX, kPORT_MuxAlt3); + + /* PORTB17 (pin 63) is configured as LPUART0_TX */ + gpio_pin_config_t const lpuart_config_tx = { kGPIO_DigitalOutput, 0 }; + GPIO_PinInit( UART_PIN_GPIO, UART_PIN_TX, &lpuart_config_tx); + PORT_SetPinMux( UART_PIN_PORT, UART_PIN_TX, kPORT_MuxAlt3); + + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_ScgFircClk)); + + // USB + CLOCK_EnableUsbfs0Clock(kCLOCK_IpSrcFircAsync, 48000000U); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ +#if 0 /* + Use this version if want the LED to blink during BOARD=board_test, + without having to hit a key. + */ + if( 0U != (kLPUART_RxDataRegFullFlag & LPUART_GetStatusFlags( UART_PORT )) ) + { + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; + } + + return( 0 ); +#else /* Wait for 'len' characters to come in */ + + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; + +#endif +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.h b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.h new file mode 100644 index 000000000..8d21fdcd4 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.h @@ -0,0 +1,56 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "fsl_device_registers.h" + +// LED +#define LED_PIN_CLOCK kCLOCK_PortD +#define LED_GPIO GPIOD +#define LED_PORT PORTD +#define LED_PIN 5 +#define LED_STATE_ON 0 + +// SW3 button1 +#define BUTTON_PIN_CLOCK kCLOCK_PortC +#define BUTTON_GPIO GPIOC +#define BUTTON_PORT PORTC +#define BUTTON_PIN 3 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART0 +#define UART_PIN_CLOCK kCLOCK_PortA +#define UART_PIN_PORT PORTA +#define UART_PIN_RX 1u +#define UART_PIN_TX 2u +#define SOPT5_LPUART0RXSRC_LPUART_RX 0x00u /*!<@brief LPUART0 Receive Data Source Select: LPUART_RX pin */ +#define SOPT5_LPUART0TXSRC_LPUART_TX 0x00u /*!<@brief LPUART0 Transmit Data Source Select: LPUART0_TX pin */ + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.mk b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.mk new file mode 100644 index 000000000..5f8ecbfe4 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/board.mk @@ -0,0 +1,26 @@ +MCU = K32L2B31A + +CFLAGS += \ + -mcpu=cortex-m0plus \ + -DCPU_K32L2B31VLH0A \ + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/K32L2B31xxxxA_flash.ld + +SRC_C += \ + $(MCU_DIR)/project_template/clock_config.c \ + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = K32L2B31xxxxA + +# For flash-pyocd target +PYOCD_TARGET = K32L2B + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/kinetis_k32/boards/frdm_k32l2b/frdm_k32l2b.c b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/frdm_k32l2b.c new file mode 100644 index 000000000..1566b4e2e --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/frdm_k32l2b/frdm_k32l2b.c @@ -0,0 +1,140 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "board.h" +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +void board_init(void) +{ + /* Enable port clocks for UART/LED/Button pins */ + CLOCK_EnableClock(UART_PIN_CLOCK); + CLOCK_EnableClock(LED_PIN_CLOCK); + CLOCK_EnableClock(BUTTON_PIN_CLOCK); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; + GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); + PORT_SetPinMux(LED_PORT, LED_PIN, kPORT_MuxAsGpio); + + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); + const port_pin_config_t BUTTON_CFG = { + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, + kPORT_MuxAsGpio + }; + PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); + + /* PORTA1 (pin 23) is configured as LPUART0_RX */ + PORT_SetPinMux(PORTA, 1U, kPORT_MuxAlt2); + /* PORTA2 (pin 24) is configured as LPUART0_TX */ + PORT_SetPinMux(PORTA, 2U, kPORT_MuxAlt2); + + SIM->SOPT5 = ((SIM->SOPT5 & + /* Mask bits to zero which are setting */ + (~(SIM_SOPT5_LPUART0TXSRC_MASK | SIM_SOPT5_LPUART0RXSRC_MASK))) + /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ + | SIM_SOPT5_LPUART0TXSRC(SOPT5_LPUART0TXSRC_LPUART_TX) + /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ + | SIM_SOPT5_LPUART0RXSRC(SOPT5_LPUART0RXSRC_LPUART_RX)); + + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + CLOCK_SetLpuart0Clock(1); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); + + // USB + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/kinetis_k32/boards/kuiic/K32L2B31xxxxA_flash.ld b/hw/bsp/kinetis_k32/boards/kuiic/K32L2B31xxxxA_flash.ld new file mode 100644 index 000000000..f478a99c7 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/kuiic/K32L2B31xxxxA_flash.ld @@ -0,0 +1,216 @@ +/* +** ################################################################### +** Processors: K32L2B31VFM0A +** K32L2B31VFT0A +** K32L2B31VLH0A +** K32L2B31VMP0A +** +** Compiler: GNU C Compiler +** Reference manual: K32L2B3xRM, Rev.0, July 2019 +** Version: rev. 1.0, 2019-07-30 +** Build: b190930 +** +** Abstract: +** Linker file for the GNU C Compiler +** +** Copyright 2016 Freescale Semiconductor, Inc. +** Copyright 2016-2019 NXP +** All rights reserved. +** +** SPDX-License-Identifier: BSD-3-Clause +** +** http: www.nxp.com +** mail: support@nxp.com +** +** ################################################################### +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400; + +/* Specify the memory areas */ +MEMORY +{ + m_interrupts (RX) : ORIGIN = 0x00008000, LENGTH = 0x00000200 + m_flash_config (RX) : ORIGIN = 0x00008400, LENGTH = 0x00000010 + m_text (RX) : ORIGIN = 0x00008410, LENGTH = 0x00037BF0 + m_data (RW) : ORIGIN = 0x1FFFE000, LENGTH = 0x00008000 +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into internal flash */ + .interrupts : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } > m_interrupts + + .flash_config : + { + . = ALIGN(4); + KEEP(*(.FlashConfig)) /* Flash Configuration Field (FCF) */ + . = ALIGN(4); + } > m_flash_config + + /* The program code and other data goes into internal flash */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + KEEP (*(.init)) + KEEP (*(.fini)) + . = ALIGN(4); + } > m_text + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > m_text + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } > m_text + + .ctors : + { + __CTOR_LIST__ = .; + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + __CTOR_END__ = .; + } > m_text + + .dtors : + { + __DTOR_LIST__ = .; + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + __DTOR_END__ = .; + } > m_text + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } > m_text + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } > m_text + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } > m_text + + __etext = .; /* define a global symbol at end of code */ + __DATA_ROM = .; /* Symbol is used by startup for data initialization */ + + /* reserve MTB memory at the beginning of m_data */ + .mtb : /* MTB buffer address as defined by the hardware */ + { + . = ALIGN(8); + _mtb_start = .; + KEEP(*(.mtb_buf)) /* need to KEEP Micro Trace Buffer as not referenced by application */ + . = ALIGN(8); + _mtb_end = .; + } > m_data + + .data : AT(__DATA_ROM) + { + . = ALIGN(4); + __DATA_RAM = .; + __data_start__ = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + KEEP(*(.jcr*)) + . = ALIGN(4); + __data_end__ = .; /* define a global symbol at data end */ + } > m_data + + __DATA_END = __DATA_ROM + (__data_end__ - __data_start__); + text_end = ORIGIN(m_text) + LENGTH(m_text); + ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data") + + /* Uninitialized data section */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + . = ALIGN(4); + __START_BSS = .; + __bss_start__ = .; + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + __END_BSS = .; + } > m_data + + .heap : + { + . = ALIGN(8); + __end__ = .; + PROVIDE(end = .); + __HeapBase = .; + . += HEAP_SIZE; + __HeapLimit = .; + __heap_limit = .; /* Add for _sbrk */ + } > m_data + + .stack : + { + . = ALIGN(8); + . += STACK_SIZE; + } > m_data + + /* Initializes stack on the end of block */ + __StackTop = ORIGIN(m_data) + LENGTH(m_data); + __StackLimit = __StackTop - STACK_SIZE; + PROVIDE(__stack = __StackTop); + + .ARM.attributes 0 : { *(.ARM.attributes) } + + ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") +} diff --git a/hw/bsp/kinetis_k32/boards/kuiic/board.h b/hw/bsp/kinetis_k32/boards/kuiic/board.h new file mode 100644 index 000000000..1e2d4f18b --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/kuiic/board.h @@ -0,0 +1,45 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "fsl_device_registers.h" + +// LED +#define LED_PIN_CLOCK kCLOCK_PortA +#define LED_GPIO GPIOA +#define LED_PORT PORTA +#define LED_PIN 2 +#define LED_STATE_ON 1 + +// UART +#define UART_PORT LPUART1 +#define UART_PIN_RX 3u +#define UART_PIN_TX 0u + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/kinetis_k32/boards/kuiic/board.mk b/hw/bsp/kinetis_k32/boards/kuiic/board.mk new file mode 100644 index 000000000..29a12e982 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/kuiic/board.mk @@ -0,0 +1,26 @@ +MCU = K32L2B31A + +# This board uses TinyUF2 for updates +UF2_FAMILY_ID = 0x7f83e793 + +CFLAGS += \ + -mcpu=cortex-m0plus \ + -DCPU_K32L2B31VLH0A \ + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/K32L2B31xxxxA_flash.ld + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 + +# For flash-jlink target +JLINK_DEVICE = K32L2B31xxxxA + +# For flash-pyocd target +PYOCD_TARGET = K32L2B + +# flash using pyocd +flash: flash-pyocd diff --git a/hw/bsp/kinetis_k32/boards/kuiic/kuiic.c b/hw/bsp/kinetis_k32/boards/kuiic/kuiic.c new file mode 100644 index 000000000..f9002a6d3 --- /dev/null +++ b/hw/bsp/kinetis_k32/boards/kuiic/kuiic.c @@ -0,0 +1,203 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" +#include "board.h" +#include "fsl_smc.h" +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define SIM_OSC32KSEL_LPO_CLK 3U /*!< OSC32KSEL select: LPO clock */ +#define SOPT5_LPUART1RXSRC_LPUART_RX 0x00u /*!<@brief LPUART1 Receive Data Source Select: LPUART_RX pin */ +#define SOPT5_LPUART1TXSRC_LPUART_TX 0x00u /*!<@brief LPUART1 Transmit Data Source Select: LPUART_TX pin */ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +// extern uint32_t SystemCoreClock; + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const mcglite_config_t mcgliteConfig_BOARD_BootClockRUN = { + .outSrc = kMCGLITE_ClkSrcHirc, /* MCGOUTCLK source is HIRC */ + .irclkEnableMode = kMCGLITE_IrclkEnable, /* MCGIRCLK enabled, MCGIRCLK disabled in STOP mode */ + .ircs = kMCGLITE_Lirc8M, /* Slow internal reference (LIRC) 8 MHz clock selected */ + .fcrdiv = kMCGLITE_LircDivBy1, /* Low-frequency Internal Reference Clock Divider: divided by 1 */ + .lircDiv2 = kMCGLITE_LircDivBy1, /* Second Low-frequency Internal Reference Clock Divider: divided by 1 */ + .hircEnableInNotHircMode = true, /* HIRC source is enabled */ +}; +const sim_clock_config_t simConfig_BOARD_BootClockRUN = { + .er32kSrc = SIM_OSC32KSEL_LPO_CLK, /* OSC32KSEL select: LPO clock */ + .clkdiv1 = 0x10000U, /* SIM_CLKDIV1 - OUTDIV1: /1, OUTDIV4: /2 */ +}; + +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Set the system clock dividers in SIM to safe value. */ + CLOCK_SetSimSafeDivs(); + /* Set MCG to HIRC mode. */ + CLOCK_SetMcgliteConfig(&mcgliteConfig_BOARD_BootClockRUN); + /* Set the clock configuration in SIM module. */ + CLOCK_SetSimConfig(&simConfig_BOARD_BootClockRUN); + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} + + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + tud_int_handler(0); +} + +void board_init(void) +{ + /* Enable port clocks for GPIO pins */ + CLOCK_EnableClock(kCLOCK_PortA); + CLOCK_EnableClock(kCLOCK_PortB); + CLOCK_EnableClock(kCLOCK_PortC); + CLOCK_EnableClock(kCLOCK_PortD); + CLOCK_EnableClock(kCLOCK_PortE); + + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 1 }; + GPIO_PinInit(GPIOA, 1U, &led_config); + PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); + led_config.outputLogic = 0; + GPIO_PinInit(GPIOA, 2U, &led_config); + PORT_SetPinMux(PORTA, 2U, kPORT_MuxAsGpio); + +#ifdef BUTTON_PIN + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); + const port_pin_config_t BUTTON_CFG = { + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, + kPORT_MuxAsGpio + }; + PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); +#endif + + /* PORTC3 is configured as LPUART0_RX */ + PORT_SetPinMux(PORTC, 3U, kPORT_MuxAlt3); + /* PORTA2 (pin 24) is configured as LPUART0_TX */ + PORT_SetPinMux(PORTE, 0U, kPORT_MuxAlt3); + + SIM->SOPT5 = ((SIM->SOPT5 & + /* Mask bits to zero which are setting */ + (~(SIM_SOPT5_LPUART1TXSRC_MASK | SIM_SOPT5_LPUART1RXSRC_MASK))) + /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ + | SIM_SOPT5_LPUART1TXSRC(SOPT5_LPUART1TXSRC_LPUART_TX) + /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ + | SIM_SOPT5_LPUART1RXSRC(SOPT5_LPUART1RXSRC_LPUART_RX)); + + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + CLOCK_SetLpuart1Clock(1); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); + + // USB + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + if (state) { + LED_GPIO->PDDR |= GPIO_FIT_REG((1UL << LED_PIN)); + } else { + LED_GPIO->PDDR &= GPIO_FIT_REG(~(1UL << LED_PIN)); + } +// GPIO_PinWrite(GPIOA, 1, state ? LED_STATE_ON : (1-LED_STATE_ON) ); +// GPIO_PinWrite(GPIOA, 2, state ? (1-LED_STATE_ON) : LED_STATE_ON ); +} + +uint32_t board_button_read(void) +{ +#ifdef BUTTON_PIN + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); +#else + return 0; +#endif +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/kinetis_k32/family.mk b/hw/bsp/kinetis_k32/family.mk new file mode 100644 index 000000000..f89138b72 --- /dev/null +++ b/hw/bsp/kinetis_k32/family.mk @@ -0,0 +1,32 @@ +SDK_DIR = hw/mcu/nxp/mcux-sdk +DEPS_SUBMODULES += $(SDK_DIR) + +MCU_DIR = $(SDK_DIR)/devices/$(MCU) +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -DCFG_TUSB_MCU=OPT_MCU_KINETIS_K32 + +SRC_C += \ + src/portable/nxp/khci/dcd_khci.c \ + src/portable/nxp/khci/hcd_khci.c \ + $(MCU_DIR)/system_$(MCU).c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_DIR)/CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/project_template \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/smc \ + $(TOP)/$(SDK_DIR)/drivers/common \ + $(TOP)/$(SDK_DIR)/drivers/gpio \ + $(TOP)/$(SDK_DIR)/drivers/port \ + $(TOP)/$(SDK_DIR)/drivers/lpuart \ + +SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk new file mode 100644 index 000000000..affe864fb --- /dev/null +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.mk @@ -0,0 +1,20 @@ +MCU = MKL25Z4 + +CFLAGS += \ + -DCPU_MKL25Z128VLK4 \ + -DCFG_EXAMPLE_VIDEO_READONLY + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=format -Wno-error=redundant-decls + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MKL25Z128xxx4_flash.ld + +# For flash-jlink target +JLINK_DEVICE = MKL25Z128xxx4 + +# For flash-pyocd target +PYOCD_TARGET = mkl25zl128 + +# flash using pyocd +flash: flash-jlink diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c b/hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c new file mode 100644 index 000000000..46f85f6a5 --- /dev/null +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/frdm_kl25z.c @@ -0,0 +1,176 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_lpsci.h" + +#include "clock_config.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ +#if CFG_TUH_ENABLED + tuh_int_handler(0); +#endif +#if CFG_TUD_ENABLED + tud_int_handler(0); +#endif +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +// LED +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIOB +#define LED_PIN_CLOCK kCLOCK_PortB +#define LED_PIN_PORT PORTB +#define LED_PIN 19U +#define LED_PIN_FUNCTION kPORT_MuxAsGpio +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN_CLOCK kCLOCK_PortC +#define BUTTON_PIN_PORT PORTC +#define BUTTON_PIN 9U +#define BUTTON_PIN_FUNCTION kPORT_MuxAsGpio +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT UART0 +#define UART_PIN_CLOCK kCLOCK_PortA +#define UART_PIN_PORT PORTA +#define UART_PIN_RX 1u +#define UART_PIN_TX 2u +#define UART_PIN_FUNCTION kPORT_MuxAlt2 +#define SOPT5_UART0RXSRC_UART_RX 0x00u /*!< UART0 receive data source select: UART0_RX pin */ +#define SOPT5_UART0TXSRC_UART_TX 0x00u /*!< UART0 transmit data source select: UART0_TX pin */ + +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + CLOCK_EnableClock(LED_PIN_CLOCK); + PORT_SetPinMux(LED_PIN_PORT, LED_PIN, LED_PIN_FUNCTION); + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(false); + +#if defined(BUTTON_PORT) && defined(BUTTON_PIN) + // Button + CLOCK_EnableClock(BUTTON_PIN_CLOCK); + port_pin_config_t button_port = { + .pullSelect = kPORT_PullUp, + .mux = BUTTON_PIN_FUNCTION, + }; + PORT_SetPinConfig(BUTTON_PIN_PORT, BUTTON_PIN, &button_port); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); +#endif + + // UART + CLOCK_EnableClock(UART_PIN_CLOCK); + PORT_SetPinMux(UART_PIN_PORT, UART_PIN_RX, UART_PIN_FUNCTION); + PORT_SetPinMux(UART_PIN_PORT, UART_PIN_TX, UART_PIN_FUNCTION); + SIM->SOPT5 = ((SIM->SOPT5 & + (~(SIM_SOPT5_UART0TXSRC_MASK | SIM_SOPT5_UART0RXSRC_MASK))) + | SIM_SOPT5_UART0TXSRC(SOPT5_UART0TXSRC_UART_TX) + | SIM_SOPT5_UART0RXSRC(SOPT5_UART0RXSRC_UART_RX) + ); + + lpsci_config_t uart_config; + CLOCK_SetLpsci0Clock(1); + LPSCI_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPSCI_Init(UART_PORT, &uart_config, CLOCK_GetPllFllSelClkFreq()); + + // USB + CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcPll0, CLOCK_GetFreq(kCLOCK_PllFllSelClk)); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_WritePinOutput(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ +#if defined(BUTTON_PORT) && defined(BUTTON_PIN) + return BUTTON_STATE_ACTIVE == GPIO_ReadPinInput(BUTTON_PORT, BUTTON_PIN); +#endif + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPSCI_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPSCI_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/kinetis_kl/family.mk b/hw/bsp/kinetis_kl/family.mk new file mode 100644 index 000000000..e805d6dae --- /dev/null +++ b/hw/bsp/kinetis_kl/family.mk @@ -0,0 +1,37 @@ +SDK_DIR = hw/mcu/nxp/nxp_sdk +DEPS_SUBMODULES += $(SDK_DIR) + +MCU_DIR = $(SDK_DIR)/devices/$(MCU) +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -DCFG_TUSB_MCU=OPT_MCU_KINETIS_KL \ + +LDFLAGS += \ + -Wl,--defsym,__stack_size__=0x400 \ + -Wl,--defsym,__heap_size__=0 + +SRC_C += \ + src/portable/nxp/khci/dcd_khci.c \ + src/portable/nxp/khci/hcd_khci.c \ + $(MCU_DIR)/system_$(MCU).c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_lpsci.c \ + $(MCU_DIR)/drivers/fsl_uart.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_DIR)/CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/project_template \ + $(TOP)/$(MCU_DIR)/drivers + +SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld b/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld deleted file mode 100644 index f478a99c7..000000000 --- a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld +++ /dev/null @@ -1,216 +0,0 @@ -/* -** ################################################################### -** Processors: K32L2B31VFM0A -** K32L2B31VFT0A -** K32L2B31VLH0A -** K32L2B31VMP0A -** -** Compiler: GNU C Compiler -** Reference manual: K32L2B3xRM, Rev.0, July 2019 -** Version: rev. 1.0, 2019-07-30 -** Build: b190930 -** -** Abstract: -** Linker file for the GNU C Compiler -** -** Copyright 2016 Freescale Semiconductor, Inc. -** Copyright 2016-2019 NXP -** All rights reserved. -** -** SPDX-License-Identifier: BSD-3-Clause -** -** http: www.nxp.com -** mail: support@nxp.com -** -** ################################################################### -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400; - -/* Specify the memory areas */ -MEMORY -{ - m_interrupts (RX) : ORIGIN = 0x00008000, LENGTH = 0x00000200 - m_flash_config (RX) : ORIGIN = 0x00008400, LENGTH = 0x00000010 - m_text (RX) : ORIGIN = 0x00008410, LENGTH = 0x00037BF0 - m_data (RW) : ORIGIN = 0x1FFFE000, LENGTH = 0x00008000 -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into internal flash */ - .interrupts : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } > m_interrupts - - .flash_config : - { - . = ALIGN(4); - KEEP(*(.FlashConfig)) /* Flash Configuration Field (FCF) */ - . = ALIGN(4); - } > m_flash_config - - /* The program code and other data goes into internal flash */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - KEEP (*(.init)) - KEEP (*(.fini)) - . = ALIGN(4); - } > m_text - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > m_text - - .ARM : - { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } > m_text - - .ctors : - { - __CTOR_LIST__ = .; - /* gcc uses crtbegin.o to find the start of - the constructors, so we make sure it is - first. Because this is a wildcard, it - doesn't matter if the user does not - actually link against crtbegin.o; the - linker won't look for a file to match a - wildcard. The wildcard also means that it - doesn't matter which directory crtbegin.o - is in. */ - KEEP (*crtbegin.o(.ctors)) - KEEP (*crtbegin?.o(.ctors)) - /* We don't want to include the .ctor section from - from the crtend.o file until after the sorted ctors. - The .ctor section from the crtend file contains the - end of ctors marker and it must be last */ - KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - __CTOR_END__ = .; - } > m_text - - .dtors : - { - __DTOR_LIST__ = .; - KEEP (*crtbegin.o(.dtors)) - KEEP (*crtbegin?.o(.dtors)) - KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - __DTOR_END__ = .; - } > m_text - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } > m_text - - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } > m_text - - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } > m_text - - __etext = .; /* define a global symbol at end of code */ - __DATA_ROM = .; /* Symbol is used by startup for data initialization */ - - /* reserve MTB memory at the beginning of m_data */ - .mtb : /* MTB buffer address as defined by the hardware */ - { - . = ALIGN(8); - _mtb_start = .; - KEEP(*(.mtb_buf)) /* need to KEEP Micro Trace Buffer as not referenced by application */ - . = ALIGN(8); - _mtb_end = .; - } > m_data - - .data : AT(__DATA_ROM) - { - . = ALIGN(4); - __DATA_RAM = .; - __data_start__ = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - KEEP(*(.jcr*)) - . = ALIGN(4); - __data_end__ = .; /* define a global symbol at data end */ - } > m_data - - __DATA_END = __DATA_ROM + (__data_end__ - __data_start__); - text_end = ORIGIN(m_text) + LENGTH(m_text); - ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data") - - /* Uninitialized data section */ - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - . = ALIGN(4); - __START_BSS = .; - __bss_start__ = .; - *(.bss) - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - __END_BSS = .; - } > m_data - - .heap : - { - . = ALIGN(8); - __end__ = .; - PROVIDE(end = .); - __HeapBase = .; - . += HEAP_SIZE; - __HeapLimit = .; - __heap_limit = .; /* Add for _sbrk */ - } > m_data - - .stack : - { - . = ALIGN(8); - . += STACK_SIZE; - } > m_data - - /* Initializes stack on the end of block */ - __StackTop = ORIGIN(m_data) + LENGTH(m_data); - __StackLimit = __StackTop - STACK_SIZE; - PROVIDE(__stack = __StackTop); - - .ARM.attributes 0 : { *(.ARM.attributes) } - - ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") -} diff --git a/hw/bsp/kuiic/board.h b/hw/bsp/kuiic/board.h deleted file mode 100644 index 1e2d4f18b..000000000 --- a/hw/bsp/kuiic/board.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "fsl_device_registers.h" - -// LED -#define LED_PIN_CLOCK kCLOCK_PortA -#define LED_GPIO GPIOA -#define LED_PORT PORTA -#define LED_PIN 2 -#define LED_STATE_ON 1 - -// UART -#define UART_PORT LPUART1 -#define UART_PIN_RX 3u -#define UART_PIN_TX 0u - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/kuiic/board.mk b/hw/bsp/kuiic/board.mk deleted file mode 100644 index cb3459586..000000000 --- a/hw/bsp/kuiic/board.mk +++ /dev/null @@ -1,52 +0,0 @@ -SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += $(SDK_DIR) tools/uf2 - -# This board uses TinyUF2 for updates -UF2_FAMILY_ID = 0x7f83e793 - -CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -DCPU_K32L2B31VLH0A \ - -DCFG_TUSB_MCU=OPT_MCU_K32L2BXX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter - -MCU_DIR = $(SDK_DIR)/devices/K32L2B31A - -# All source paths should be relative to the top level. -LD_FILE = /hw/bsp/$(BOARD)/K32L2B31xxxxA_flash.ld - -SRC_C += \ - src/portable/nxp/khci/dcd_khci.c \ - $(MCU_DIR)/system_K32L2B31A.c \ - $(MCU_DIR)/drivers/fsl_clock.c \ - $(SDK_DIR)/drivers/gpio/fsl_gpio.c \ - $(SDK_DIR)/drivers/lpuart/fsl_lpuart.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(SDK_DIR)/CMSIS/Include \ - $(TOP)/$(SDK_DIR)/drivers/smc \ - $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/gpio \ - $(TOP)/$(SDK_DIR)/drivers/port \ - $(TOP)/$(SDK_DIR)/drivers/lpuart \ - $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers - -SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - -# For flash-jlink target -JLINK_DEVICE = MKL25Z128xxx4 - -# For flash-pyocd target -PYOCD_TARGET = K32L2B - -# flash using pyocd -flash: flash-pyocd diff --git a/hw/bsp/kuiic/kuiic.c b/hw/bsp/kuiic/kuiic.c deleted file mode 100644 index 97677d47a..000000000 --- a/hw/bsp/kuiic/kuiic.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * Copyright (c) 2020, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" -#include "board.h" -#include "fsl_smc.h" -#include "fsl_gpio.h" -#include "fsl_port.h" -#include "fsl_clock.h" -#include "fsl_lpuart.h" - -/******************************************************************************* - * Definitions - ******************************************************************************/ -#define SIM_OSC32KSEL_LPO_CLK 3U /*!< OSC32KSEL select: LPO clock */ -#define SOPT5_LPUART1RXSRC_LPUART_RX 0x00u /*!<@brief LPUART1 Receive Data Source Select: LPUART_RX pin */ -#define SOPT5_LPUART1TXSRC_LPUART_TX 0x00u /*!<@brief LPUART1 Transmit Data Source Select: LPUART_TX pin */ -#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ - -/******************************************************************************* - * Variables - ******************************************************************************/ -/* System clock frequency. */ -// extern uint32_t SystemCoreClock; - -/******************************************************************************* - * Variables for BOARD_BootClockRUN configuration - ******************************************************************************/ -const mcglite_config_t mcgliteConfig_BOARD_BootClockRUN = { - .outSrc = kMCGLITE_ClkSrcHirc, /* MCGOUTCLK source is HIRC */ - .irclkEnableMode = kMCGLITE_IrclkEnable, /* MCGIRCLK enabled, MCGIRCLK disabled in STOP mode */ - .ircs = kMCGLITE_Lirc8M, /* Slow internal reference (LIRC) 8 MHz clock selected */ - .fcrdiv = kMCGLITE_LircDivBy1, /* Low-frequency Internal Reference Clock Divider: divided by 1 */ - .lircDiv2 = kMCGLITE_LircDivBy1, /* Second Low-frequency Internal Reference Clock Divider: divided by 1 */ - .hircEnableInNotHircMode = true, /* HIRC source is enabled */ -}; -const sim_clock_config_t simConfig_BOARD_BootClockRUN = { - .er32kSrc = SIM_OSC32KSEL_LPO_CLK, /* OSC32KSEL select: LPO clock */ - .clkdiv1 = 0x10000U, /* SIM_CLKDIV1 - OUTDIV1: /1, OUTDIV4: /2 */ -}; - -/******************************************************************************* - * Code for BOARD_BootClockRUN configuration - ******************************************************************************/ -void BOARD_BootClockRUN(void) -{ - /* Set the system clock dividers in SIM to safe value. */ - CLOCK_SetSimSafeDivs(); - /* Set MCG to HIRC mode. */ - CLOCK_SetMcgliteConfig(&mcgliteConfig_BOARD_BootClockRUN); - /* Set the clock configuration in SIM module. */ - CLOCK_SetSimConfig(&simConfig_BOARD_BootClockRUN); - /* Set SystemCoreClock variable. */ - SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; -} - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -void board_init(void) -{ - /* Enable port clocks for GPIO pins */ - CLOCK_EnableClock(kCLOCK_PortA); - CLOCK_EnableClock(kCLOCK_PortB); - CLOCK_EnableClock(kCLOCK_PortC); - CLOCK_EnableClock(kCLOCK_PortD); - CLOCK_EnableClock(kCLOCK_PortE); - - - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 1 }; - GPIO_PinInit(GPIOA, 1U, &led_config); - PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); - led_config.outputLogic = 0; - GPIO_PinInit(GPIOA, 2U, &led_config); - PORT_SetPinMux(PORTA, 2U, kPORT_MuxAsGpio); - -#ifdef BUTTON_PIN - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; - GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); - const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, - kPORT_MuxAsGpio - }; - PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); -#endif - - /* PORTC3 is configured as LPUART0_RX */ - PORT_SetPinMux(PORTC, 3U, kPORT_MuxAlt3); - /* PORTA2 (pin 24) is configured as LPUART0_TX */ - PORT_SetPinMux(PORTE, 0U, kPORT_MuxAlt3); - - SIM->SOPT5 = ((SIM->SOPT5 & - /* Mask bits to zero which are setting */ - (~(SIM_SOPT5_LPUART1TXSRC_MASK | SIM_SOPT5_LPUART1RXSRC_MASK))) - /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ - | SIM_SOPT5_LPUART1TXSRC(SOPT5_LPUART1TXSRC_LPUART_TX) - /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ - | SIM_SOPT5_LPUART1RXSRC(SOPT5_LPUART1RXSRC_LPUART_RX)); - - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - CLOCK_SetLpuart1Clock(1); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - lpuart_config_t uart_config; - LPUART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); - - // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - if (state) { - LED_GPIO->PDDR |= GPIO_FIT_REG((1UL << LED_PIN)); - } else { - LED_GPIO->PDDR &= GPIO_FIT_REG(~(1UL << LED_PIN)); - } -// GPIO_PinWrite(GPIOA, 1, state ? LED_STATE_ON : (1-LED_STATE_ON) ); -// GPIO_PinWrite(GPIOA, 2, state ? (1-LED_STATE_ON) : LED_STATE_ON ); -} - -uint32_t board_button_read(void) -{ -#ifdef BUTTON_PIN - return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); -#else - return 0; -#endif -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPUART_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index a94e1877f..b903abeca 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -85,7 +85,7 @@ #define TUP_DCD_ENDPOINT_MAX 8 #define TUP_RHPORT_HIGHSPEED 1 // Port0 HS, Port1 HS -#elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX, OPT_MCU_K32L2AXX, OPT_MCU_K32L2BXX) +#elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32) #define TUP_USBIP_CHIPIDEA_FS #define TUP_USBIP_CHIPIDEA_FS_KINETIS #define TUP_DCD_ENDPOINT_MAX 16 diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 27073dce7..6d25cd862 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -26,15 +26,14 @@ #include "tusb_option.h" -#if CFG_TUH_ENABLED && \ - ( \ - ( CFG_TUSB_MCU == OPT_MCU_MKL25ZXX ) || \ - ( CFG_TUSB_MCU == OPT_MCU_K32L2AXX ) || \ - ( CFG_TUSB_MCU == OPT_MCU_K32L2BXX ) \ - ) - -#include "fsl_device_registers.h" -#define KHCI USB0 +#if CFG_TUH_ENABLED && defined(TUP_USBIP_CHIPIDEA_FS) + +#ifdef TUP_USBIP_CHIPIDEA_FS_KINETIS + #include "fsl_device_registers.h" + #define KHCI USB0 +#else + #error "MCU is not supported" +#endif #include "host/hcd.h" diff --git a/src/tusb_option.h b/src/tusb_option.h index 5a234e357..c679f2f12 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -117,9 +117,11 @@ #define OPT_MCU_RP2040 1100 ///< Raspberry Pi RP2040 // NXP Kinetis -#define OPT_MCU_MKL25ZXX 1200 ///< NXP MKL25Zxx -#define OPT_MCU_K32L2BXX 1201 ///< NXP K32L2Bxx -#define OPT_MCU_K32L2AXX 1202 ///< NXP K32L2Axx +#define OPT_MCU_KINETIS_KL 1200 ///< NXP KL series +#define OPT_MCU_KINETIS_K32 1201 ///< NXP K32 series + +#define OPT_MCU_MKL25ZXX 1200 ///< Alias to KL (obsolete) +#define OPT_MCU_K32L2BXX 1201 ///< Alias to K32 (obsolete) // Silabs #define OPT_MCU_EFM32GG 1300 ///< Silabs EFM32GG -- cgit v1.3.1 From f80d11301ea03746d86dd64c651b31bd600772f7 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Mar 2023 16:33:35 +0700 Subject: update doc and generate deps list --- README.rst | 2 ++ docs/reference/dependencies.rst | 64 ++++++++++++++++++++++++++++++++++++++ docs/reference/getting_started.rst | 22 ++++++------- docs/reference/index.rst | 1 + tools/gen_doc.py | 33 ++++++++++++++++++++ 5 files changed, 109 insertions(+), 13 deletions(-) create mode 100644 docs/reference/dependencies.rst create mode 100644 tools/gen_doc.py (limited to 'docs/reference') diff --git a/README.rst b/README.rst index adca22433..ef441a596 100644 --- a/README.rst +++ b/README.rst @@ -112,6 +112,7 @@ Docs - `Supported Devices`_ - `Getting Started`_ + - `Dependencies`_ - `Concurrency`_ - `Contributing`_ @@ -146,6 +147,7 @@ in your project. .. _Reference: docs/reference/index.rst .. _Supported Devices: docs/reference/supported.rst .. _Getting Started: docs/reference/getting_started.rst +.. _Dependencies: docs/reference/dependencies.rst .. _Concurrency: docs/reference/concurrency.rst .. _Contributing: docs/contributing/index.rst .. _Code of Conduct: CODE_OF_CONDUCT.rst diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst new file mode 100644 index 000000000..130527e2c --- /dev/null +++ b/docs/reference/dependencies.rst @@ -0,0 +1,64 @@ +************ +Dependencies +************ + +MCU low-level peripheral driver and external libraries for building TinyUSB examples + +======================================== ============================================================== ======================================== +Path Project Commit +======================================== ============================================================== ======================================== +hw/mcu/allwinner https://github.com/hathach/allwinner_driver.git 8e5e89e8e132c0fd90e72d5422e5d3d68232b756 +hw/mcu/bridgetek/ft9xx/ft90x-sdk https://github.com/BRTSG-FOSS/ft90x-sdk.git 91060164afe239fcb394122e8bf9eb24d3194eb1 +hw/mcu/broadcom https://github.com/adafruit/broadcom-peripherals.git 08370086080759ed54ac1136d62d2ad24c6fa267 +hw/mcu/gd/nuclei-sdk https://github.com/Nuclei-Software/nuclei-sdk.git 7eb7bfa9ea4fbeacfafe1d5f77d5a0e6ed3922e7 +hw/mcu/infineon/mtb-xmclib-cat3 https://github.com/Infineon/mtb-xmclib-cat3.git daf5500d03cba23e68c2f241c30af79cd9d63880 +hw/mcu/microchip https://github.com/hathach/microchip_driver.git 9e8b37e307d8404033bb881623a113931e1edf27 +hw/mcu/mindmotion/mm32sdk https://github.com/hathach/mm32sdk.git 0b79559eb411149d36e073c1635c620e576308d4 +hw/mcu/nordic/nrfx https://github.com/NordicSemiconductor/nrfx.git 281cc2e178fd9a470d844b3afdea9eb322a0b0e8 +hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver.git 2204191ec76283371419fbcec207da02e1bc22fa +hw/mcu/nxp/lpcopen https://github.com/hathach/nxp_lpcopen.git 43c45c85405a5dd114fff0ea95cca62837740c13 +hw/mcu/nxp/mcux-sdk https://github.com/NXPmicro/mcux-sdk.git ae2ab01d9d70ad00cd0e935c2552bd5f0e5c0294 +hw/mcu/nxp/nxp_sdk https://github.com/hathach/nxp_sdk.git 845c8fc49b6fb660f06a5c45225494eacb06f00c +hw/mcu/raspberry_pi/Pico-PIO-USB https://github.com/sekigon-gonnoc/Pico-PIO-USB.git c3715ce94b6f6391856de56081d4d9b3e98fa93d +hw/mcu/renesas/fsp https://github.com/renesas/fsp.git 8dc14709f2a6518b43f71efad70d900b7718d9f1 +hw/mcu/renesas/rx https://github.com/kkitayam/rx_device.git 706b4e0cf485605c32351e2f90f5698267996023 +hw/mcu/silabs/cmsis-dfp-efm32gg12b https://github.com/cmsis-packs/cmsis-dfp-efm32gg12b.git f1c31b7887669cb230b3ea63f9b56769078960bc +hw/mcu/sony/cxd56/spresense-exported-sdk https://github.com/sonydevworld/spresense-exported-sdk.git 2ec2a1538362696118dc3fdf56f33dacaf8f4067 +hw/mcu/st/cmsis_device_f0 https://github.com/STMicroelectronics/cmsis_device_f0.git 2fc25ee22264bc27034358be0bd400b893ef837e +hw/mcu/st/cmsis_device_f1 https://github.com/STMicroelectronics/cmsis_device_f1.git 6601104a6397299b7304fd5bcd9a491f56cb23a6 +hw/mcu/st/cmsis_device_f2 https://github.com/STMicroelectronics/cmsis_device_f2.git 182fcb3681ce116816feb41b7764f1b019ce796f +hw/mcu/st/cmsis_device_f3 https://github.com/STMicroelectronics/cmsis_device_f3.git 5e4ee5ed7a7b6c85176bb70a9fd3c72d6eb99f1b +hw/mcu/st/cmsis_device_f4 https://github.com/STMicroelectronics/cmsis_device_f4.git 2615e866fa48fe1ff1af9e31c348813f2b19e7ec +hw/mcu/st/cmsis_device_f7 https://github.com/STMicroelectronics/cmsis_device_f7.git fc676ef1ad177eb874eaa06444d3d75395fc51f4 +hw/mcu/st/cmsis_device_g0 https://github.com/STMicroelectronics/cmsis_device_g0.git 08258b28ee95f50cb9624d152a1cbf084be1f9a5 +hw/mcu/st/cmsis_device_g4 https://github.com/STMicroelectronics/cmsis_device_g4.git ce822adb1dc552b3aedd13621edbc7fdae124878 +hw/mcu/st/cmsis_device_h7 https://github.com/STMicroelectronics/cmsis_device_h7.git 60dc2c913203dc8629dc233d4384dcc41c91e77f +hw/mcu/st/cmsis_device_l0 https://github.com/STMicroelectronics/cmsis_device_l0.git 06748ca1f93827befdb8b794402320d94d02004f +hw/mcu/st/cmsis_device_l1 https://github.com/STMicroelectronics/cmsis_device_l1.git 7f16ec0a1c4c063f84160b4cc6bf88ad554a823e +hw/mcu/st/cmsis_device_l4 https://github.com/STMicroelectronics/cmsis_device_l4.git 6ca7312fa6a5a460b5a5a63d66da527fdd8359a6 +hw/mcu/st/cmsis_device_l5 https://github.com/STMicroelectronics/cmsis_device_l5.git d922865fc0326a102c26211c44b8e42f52c1e53d +hw/mcu/st/cmsis_device_u5 https://github.com/STMicroelectronics/cmsis_device_u5.git bc00f3c9d8a4e25220f84c26d414902cc6bdf566 +hw/mcu/st/cmsis_device_wb https://github.com/STMicroelectronics/cmsis_device_wb.git 9c5d1920dd9fabbe2548e10561d63db829bb744f +hw/mcu/st/stm32f0xx_hal_driver https://github.com/STMicroelectronics/stm32f0xx_hal_driver.git 0e95cd88657030f640a11e690a8a5186c7712ea5 +hw/mcu/st/stm32f1xx_hal_driver https://github.com/STMicroelectronics/stm32f1xx_hal_driver.git 1dd9d3662fb7eb2a7f7d3bc0a4c1dc7537915a29 +hw/mcu/st/stm32f2xx_hal_driver https://github.com/STMicroelectronics/stm32f2xx_hal_driver.git c75ace9b908a9aca631193ebf2466963b8ea33d0 +hw/mcu/st/stm32f3xx_hal_driver https://github.com/STMicroelectronics/stm32f3xx_hal_driver.git 1761b6207318ede021706e75aae78f452d72b6fa +hw/mcu/st/stm32f4xx_hal_driver https://github.com/STMicroelectronics/stm32f4xx_hal_driver.git 04e99fbdabd00ab8f370f377c66b0a4570365b58 +hw/mcu/st/stm32f7xx_hal_driver https://github.com/STMicroelectronics/stm32f7xx_hal_driver.git f7ffdf6bf72110e58b42c632b0a051df5997e4ee +hw/mcu/st/stm32g0xx_hal_driver https://github.com/STMicroelectronics/stm32g0xx_hal_driver.git 5b53e6cee664a82b16c86491aa0060e2110c00cb +hw/mcu/st/stm32g4xx_hal_driver https://github.com/STMicroelectronics/stm32g4xx_hal_driver.git 8b4518417706d42eef5c14e56a650005abf478a8 +hw/mcu/st/stm32h7xx_hal_driver https://github.com/STMicroelectronics/stm32h7xx_hal_driver.git d8461b980b59b1625207d8c4f2ce0a9c2a7a3b04 +hw/mcu/st/stm32l0xx_hal_driver https://github.com/STMicroelectronics/stm32l0xx_hal_driver.git fbdacaf6f8c82a4e1eb9bd74ba650b491e97e17b +hw/mcu/st/stm32l1xx_hal_driver https://github.com/STMicroelectronics/stm32l1xx_hal_driver.git 44efc446fa69ed8344e7fd966e68ed11043b35d9 +hw/mcu/st/stm32l4xx_hal_driver https://github.com/STMicroelectronics/stm32l4xx_hal_driver.git aee3d5bf283ae5df87532b781bdd01b7caf256fc +hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git 675c32a75df37f39d50d61f51cb0dcf53f07e1cb +hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 2e1d4cdb386e33391cb261dfff4fefa92e4aa35a +hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 +hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 +hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 17761f5cf9dbbf2dcf665b7c04934188add20082 +lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 20285262657d1b482d132d20d755c8c330d55c1f +lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git def7d2df2b0506d3d249334974f51e427c17a41c +lib/lwip https://github.com/lwip-tcpip/lwip.git 159e31b689577dbf69cf0683bbaffbd71fa5ee10 +lib/sct_neopixel https://github.com/gsteiert/sct_neopixel.git e73e04ca63495672d955f9268e003cffe168fcd8 +tools/uf2 https://github.com/microsoft/uf2.git 19615407727073e36d81bf239c52108ba92e7660 +======================================== ============================================================== ======================================== diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index ef4a6ba61..1f41cb888 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -44,12 +44,6 @@ For your convenience, TinyUSB contains a handful of examples for both host and d $ git clone https://github.com/hathach/tinyusb tinyusb $ cd tinyusb -Some TinyUSB examples also requires external submodule libraries in ``/lib`` such as FreeRTOS, Lightweight IP to build. Run following command to fetch them - -.. code-block:: - - $ git submodule update --init lib - Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for tinyusb, you should download/install it first according to its manufacturer guide. Build @@ -61,23 +55,25 @@ To build example, first change directory to an example folder. $ cd examples/device/cdc_msc -Before building, we need to download MCU driver submodule to provide low-level MCU peripheral's driver first. Run the ``get-deps`` target in one of the example folder as follow. You only need to do this once per mcu +Before building, we firstly need to download dependencies such as: MCU low-level peripheral driver and external libraries e.g FreeRTOS (required by some examples). Run the ``get-deps`` target in one of the example folder as follow. You only need to do this once per mcu. Check out `complete list of dependencies and their designated path here `_ .. code-block:: - $ make BOARD=feather_nrf52840_express get-deps - - -Some modules (e.g. RP2040 and ESP32s2) require the project makefiles to be customized using CMake. If necessary apply any setup steps for the platform's SDK. + $ make BOARD=raspberry_pi_pico get-deps Then compile with ``make BOARD=[board_name] all``\ , for example .. code-block:: - $ make BOARD=feather_nrf52840_express all + $ make BOARD=raspberry_pi_pico all Note: ``BOARD`` can be found as directory name in ``hw/bsp``\ , either in its family/boards or directly under bsp (no family). -Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``/examples/device/99-tinyusb.rules`` file to /etc/udev/rules.d/ then run ``sudo udevadm control --reload-rules && sudo udevadm trigger`` is good enough. +Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``99-tinyusb.rules`` and reload your udev is good to go + +.. code-block:: + + $ cp examples/device/99-tinyusb.rules /etc/udev/rules.d/ + $ sudo udevadm control --reload-rules && sudo udevadm trigger Port Selection ~~~~~~~~~~~~~~ diff --git a/docs/reference/index.rst b/docs/reference/index.rst index 292fb1a93..a9663ee7d 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -56,4 +56,5 @@ Index supported getting_started + dependencies concurrency diff --git a/tools/gen_doc.py b/tools/gen_doc.py new file mode 100644 index 000000000..db11e2cfb --- /dev/null +++ b/tools/gen_doc.py @@ -0,0 +1,33 @@ +import pandas as pd +from tabulate import tabulate +from pathlib import Path +from get_deps import deps_all + +# TOP is tinyusb root dir +TOP = Path(__file__).parent.parent.resolve() + +########################################### +# Dependencies +########################################### +def gen_deps_doc(): + deps_rst = Path(TOP) / "docs/reference/dependencies.rst" + df = pd.DataFrame.from_dict(deps_all, orient='index', columns=['Commit', 'Project']) + df = df[['Project', 'Commit']].sort_index() + df = df.rename_axis("Path") + + outstr = f"""\ +************ +Dependencies +************ + +MCU low-level peripheral driver and external libraries for building TinyUSB examples + +{tabulate(df, headers="keys", tablefmt='rst')} +""" + + with deps_rst.open('w') as f: + f.write(outstr) + + +if __name__ == "__main__": + gen_deps_doc() -- cgit v1.3.1 From 14d69e46be7b875fef534d70e619764df63f023d Mon Sep 17 00:00:00 2001 From: mndza Date: Tue, 27 Jun 2023 12:05:59 +0200 Subject: Update support for Cynthion boards - Rename LUNA to Cynthion - Add support for newer revisions (>=0.6) - Bootloader (saturn-v) default size is now 2K --- docs/reference/supported.rst | 2 +- hw/bsp/samd11/boards/cynthion_d11/board.h | 52 ++++++++ hw/bsp/samd11/boards/cynthion_d11/board.mk | 22 ++++ .../boards/cynthion_d11/samd11d14am_flash.ld | 144 +++++++++++++++++++++ hw/bsp/samd11/boards/luna_d11/board.h | 46 ------- hw/bsp/samd11/boards/luna_d11/board.mk | 11 -- hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld | 144 --------------------- hw/bsp/samd11/boards/samd11_xplained/board.h | 1 + hw/bsp/samd11/family.c | 2 +- hw/bsp/samd21/boards/cynthion_d21/board.h | 46 +++++++ hw/bsp/samd21/boards/cynthion_d21/board.mk | 16 +++ .../samd21/boards/cynthion_d21/samd21g18a_flash.ld | 144 +++++++++++++++++++++ hw/bsp/samd21/boards/luna_d21/board.h | 46 ------- hw/bsp/samd21/boards/luna_d21/board.mk | 10 -- hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld | 144 --------------------- 15 files changed, 427 insertions(+), 403 deletions(-) create mode 100644 hw/bsp/samd11/boards/cynthion_d11/board.h create mode 100644 hw/bsp/samd11/boards/cynthion_d11/board.mk create mode 100644 hw/bsp/samd11/boards/cynthion_d11/samd11d14am_flash.ld delete mode 100644 hw/bsp/samd11/boards/luna_d11/board.h delete mode 100644 hw/bsp/samd11/boards/luna_d11/board.mk delete mode 100644 hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld create mode 100644 hw/bsp/samd21/boards/cynthion_d21/board.h create mode 100644 hw/bsp/samd21/boards/cynthion_d21/board.mk create mode 100644 hw/bsp/samd21/boards/cynthion_d21/samd21g18a_flash.ld delete mode 100644 hw/bsp/samd21/boards/luna_d21/board.h delete mode 100644 hw/bsp/samd21/boards/luna_d21/board.mk delete mode 100644 hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index a5d055893..aed64782c 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -175,7 +175,7 @@ SAMD11 & SAMD21 - `Adafruit Feather M0 Express `__ - `Adafruit ItsyBitsy M0 Express `__ - `Adafruit Metro M0 Express `__ -- `Great Scott Gadgets LUNA `__ +- `Great Scott Gadgets Cynthion `__ - `Microchip SAMD11 Xplained Pro `__ - `Microchip SAMD21 Xplained Pro `__ - `Seeeduino Xiao `__ diff --git a/hw/bsp/samd11/boards/cynthion_d11/board.h b/hw/bsp/samd11/boards/cynthion_d11/board.h new file mode 100644 index 000000000..b13c8eeea --- /dev/null +++ b/hw/bsp/samd11/boards/cynthion_d11/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA27 // pin PA22 +#define LED_STATE_ON 0 + +// Button +#if ((_BOARD_REVISION_MAJOR_ == 0) && (_BOARD_REVISION_MINOR_ < 6)) +#define BUTTON_PIN PIN_PA16 // pin PB22 +#define BUTTON_PULL_MODE GPIO_PULL_UP +#else +#define BUTTON_PIN PIN_PA02 +#define BUTTON_PULL_MODE GPIO_PULL_OFF +#endif +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd11/boards/cynthion_d11/board.mk b/hw/bsp/samd11/boards/cynthion_d11/board.mk new file mode 100644 index 000000000..d36c91970 --- /dev/null +++ b/hw/bsp/samd11/boards/cynthion_d11/board.mk @@ -0,0 +1,22 @@ +BOARD_REVISION_MAJOR ?= 1 +BOARD_REVISION_MINOR ?= 0 + +CFLAGS += -D__SAMD11D14AM__ \ + -D_BOARD_REVISION_MAJOR_=$(BOARD_REVISION_MAJOR) \ + -D_BOARD_REVISION_MINOR_=$(BOARD_REVISION_MINOR) + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/samd11d14am_flash.ld + +# Default bootloader size is now 2K, allow to specify other +ifeq ($(BOOTLOADER_SIZE), ) + BOOTLOADER_SIZE := 0x800 +endif +LDFLAGS += -Wl,--defsym=BOOTLOADER_SIZE=$(BOOTLOADER_SIZE) + +# For flash-jlink target +JLINK_DEVICE = ATSAMD11D14 + +# flash using dfu-util +flash: $(BUILD)/$(PROJECT).bin + dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< diff --git a/hw/bsp/samd11/boards/cynthion_d11/samd11d14am_flash.ld b/hw/bsp/samd11/boards/cynthion_d11/samd11d14am_flash.ld new file mode 100644 index 000000000..f175e6504 --- /dev/null +++ b/hw/bsp/samd11/boards/cynthion_d11/samd11d14am_flash.ld @@ -0,0 +1,144 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD11D14AM + * + * Copyright (c) 2018 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + BOOTLOADER_SIZE, LENGTH = 0x00004000 - BOOTLOADER_SIZE + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00001000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x400; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd11/boards/luna_d11/board.h b/hw/bsp/samd11/boards/luna_d11/board.h deleted file mode 100644 index 1bda92934..000000000 --- a/hw/bsp/samd11/boards/luna_d11/board.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA27 // pin PA22 -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PIN PIN_PA16 // pin PB22 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd11/boards/luna_d11/board.mk b/hw/bsp/samd11/boards/luna_d11/board.mk deleted file mode 100644 index ad9cfb25d..000000000 --- a/hw/bsp/samd11/boards/luna_d11/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -D__SAMD11D14AM__ - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/samd11d14am_flash.ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD11D14 - -# flash using dfu-util -flash: $(BUILD)/$(PROJECT).bin - dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< diff --git a/hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld b/hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld deleted file mode 100644 index cb633c195..000000000 --- a/hw/bsp/samd11/boards/luna_d11/samd11d14am_flash.ld +++ /dev/null @@ -1,144 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD11D14AM - * - * Copyright (c) 2018 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 4K, LENGTH = 0x00004000 - 4K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00001000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x400; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd11/boards/samd11_xplained/board.h b/hw/bsp/samd11/boards/samd11_xplained/board.h index cfeac673c..2bbec4958 100644 --- a/hw/bsp/samd11/boards/samd11_xplained/board.h +++ b/hw/bsp/samd11/boards/samd11_xplained/board.h @@ -38,6 +38,7 @@ // Button #define BUTTON_PIN PIN_PA14 // pin PB22 #define BUTTON_STATE_ACTIVE 0 +#define BUTTON_PULL_MODE GPIO_PULL_UP #ifdef __cplusplus } diff --git a/hw/bsp/samd11/family.c b/hw/bsp/samd11/family.c index 8d9633971..e232761cc 100644 --- a/hw/bsp/samd11/family.c +++ b/hw/bsp/samd11/family.c @@ -78,7 +78,7 @@ void board_init(void) // Button init gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); + gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_PULL_MODE); /* USB Clock init * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock diff --git a/hw/bsp/samd21/boards/cynthion_d21/board.h b/hw/bsp/samd21/boards/cynthion_d21/board.h new file mode 100644 index 000000000..776063636 --- /dev/null +++ b/hw/bsp/samd21/boards/cynthion_d21/board.h @@ -0,0 +1,46 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA22 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PIN PIN_PB22 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/cynthion_d21/board.mk b/hw/bsp/samd21/boards/cynthion_d21/board.mk new file mode 100644 index 000000000..52c9d60cb --- /dev/null +++ b/hw/bsp/samd21/boards/cynthion_d21/board.mk @@ -0,0 +1,16 @@ +CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY + +LD_FILE = $(BOARD_PATH)/samd21g18a_flash.ld + +# Default bootloader size is now 2K, allow to specify other +ifeq ($(BOOTLOADER_SIZE), ) + BOOTLOADER_SIZE := 0x800 +endif +LDFLAGS += -Wl,--defsym=BOOTLOADER_SIZE=$(BOOTLOADER_SIZE) + +# For flash-jlink target +JLINK_DEVICE = ATSAMD21G18 + +# flash using dfu-util +flash: $(BUILD)/$(PROJECT).bin + dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< diff --git a/hw/bsp/samd21/boards/cynthion_d21/samd21g18a_flash.ld b/hw/bsp/samd21/boards/cynthion_d21/samd21g18a_flash.ld new file mode 100644 index 000000000..ecb6b8523 --- /dev/null +++ b/hw/bsp/samd21/boards/cynthion_d21/samd21g18a_flash.ld @@ -0,0 +1,144 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAMD21G18A + * + * Copyright (c) 2017 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000 + BOOTLOADER_SIZE, LENGTH = 0x00040000 - BOOTLOADER_SIZE + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd21/boards/luna_d21/board.h b/hw/bsp/samd21/boards/luna_d21/board.h deleted file mode 100644 index 776063636..000000000 --- a/hw/bsp/samd21/boards/luna_d21/board.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -// LED -#define LED_PIN PIN_PA22 -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PIN PIN_PB22 -#define BUTTON_STATE_ACTIVE 0 - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd21/boards/luna_d21/board.mk b/hw/bsp/samd21/boards/luna_d21/board.mk deleted file mode 100644 index 508a72b1f..000000000 --- a/hw/bsp/samd21/boards/luna_d21/board.mk +++ /dev/null @@ -1,10 +0,0 @@ -CFLAGS += -D__SAMD21G18A__ -DCFG_EXAMPLE_VIDEO_READONLY - -LD_FILE = $(BOARD_PATH)/samd21g18a_flash.ld - -# For flash-jlink target -JLINK_DEVICE = ATSAMD21G18 - -# flash using dfu-util -flash: $(BUILD)/$(PROJECT).bin - dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< diff --git a/hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld b/hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld deleted file mode 100644 index 158593036..000000000 --- a/hw/bsp/samd21/boards/luna_d21/samd21g18a_flash.ld +++ /dev/null @@ -1,144 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD21G18A - * - * Copyright (c) 2017 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + 4K, LENGTH = 0x00040000 - 4K - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} -- cgit v1.3.1 From ce627f431831e1fbaa3bb7bad35a489b8006b749 Mon Sep 17 00:00:00 2001 From: "denis.krasutski" Date: Fri, 6 Oct 2023 13:04:54 +0300 Subject: feat(ch32f20x): add support of ch32f20x --- .gitignore | 1 + README.rst | 2 +- docs/reference/dependencies.rst | 1 + docs/reference/supported.rst | 5 +- hw/bsp/board_mcu.h | 3 + hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h | 59 ++ hw/bsp/ch32f20x/boards/ch32f205r-r0/board.mk | 7 + hw/bsp/ch32f20x/ch32f205.ld | 111 +++ hw/bsp/ch32f20x/ch32f20x_conf.h | 40 + hw/bsp/ch32f20x/ch32f20x_it.c | 35 + hw/bsp/ch32f20x/ch32f20x_it.h | 25 + hw/bsp/ch32f20x/core_cm3.h | 11 + hw/bsp/ch32f20x/debug_uart.c | 105 +++ hw/bsp/ch32f20x/debug_uart.h | 31 + hw/bsp/ch32f20x/family.c | 141 ++++ hw/bsp/ch32f20x/family.mk | 30 + hw/bsp/ch32f20x/startup_gcc_ch32f20x_d8c.s | 493 +++++++++++ hw/bsp/ch32f20x/system_ch32f20x.c | 1122 ++++++++++++++++++++++++++ hw/bsp/ch32f20x/system_ch32f20x.h | 28 + hw/bsp/ch32v307/family.mk | 2 +- src/common/tusb_mcu.h | 4 + src/portable/wch/ch32_usbhs_reg.h | 349 ++++++++ src/portable/wch/ch32v307/ch32_usbhs_reg.h | 345 -------- src/portable/wch/ch32v307/dcd_usbhs.c | 391 --------- src/portable/wch/dcd_ch32_usbhs.c | 391 +++++++++ src/tusb_option.h | 1 + tools/get_deps.py | 3 + tools/iar_template.ipcf | 4 +- 28 files changed, 2999 insertions(+), 741 deletions(-) create mode 100644 hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h create mode 100644 hw/bsp/ch32f20x/boards/ch32f205r-r0/board.mk create mode 100644 hw/bsp/ch32f20x/ch32f205.ld create mode 100644 hw/bsp/ch32f20x/ch32f20x_conf.h create mode 100644 hw/bsp/ch32f20x/ch32f20x_it.c create mode 100644 hw/bsp/ch32f20x/ch32f20x_it.h create mode 100644 hw/bsp/ch32f20x/core_cm3.h create mode 100644 hw/bsp/ch32f20x/debug_uart.c create mode 100644 hw/bsp/ch32f20x/debug_uart.h create mode 100644 hw/bsp/ch32f20x/family.c create mode 100644 hw/bsp/ch32f20x/family.mk create mode 100644 hw/bsp/ch32f20x/startup_gcc_ch32f20x_d8c.s create mode 100644 hw/bsp/ch32f20x/system_ch32f20x.c create mode 100644 hw/bsp/ch32f20x/system_ch32f20x.h create mode 100644 src/portable/wch/ch32_usbhs_reg.h delete mode 100644 src/portable/wch/ch32v307/ch32_usbhs_reg.h delete mode 100644 src/portable/wch/ch32v307/dcd_usbhs.c create mode 100644 src/portable/wch/dcd_ch32_usbhs.c (limited to 'docs/reference') diff --git a/.gitignore b/.gitignore index c665d6c73..e6ccec736 100644 --- a/.gitignore +++ b/.gitignore @@ -81,6 +81,7 @@ hw/mcu/st/stm32u5xx_hal_driver hw/mcu/st/stm32wbxx_hal_driver hw/mcu/ti hw/mcu/wch/ch32v307 +hw/mcu/wch/ch32f20x lib/CMSIS_5 lib/FreeRTOS-Kernel lib/lwip diff --git a/README.rst b/README.rst index aef310b98..919596e67 100644 --- a/README.rst +++ b/README.rst @@ -60,7 +60,7 @@ The stack supports the following MCUs: - **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G0, G4, L0, L1, L4, L4+, WB - **TI:** MSP430, MSP432E4, TM4C123 - **ValentyUSB:** eptri -- **WCH:** CH32V307 +- **WCH:** CH32V307, CH32F20x Here is the list of `Supported Devices`_ that can be used with provided examples. diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index 130527e2c..d532a3a1e 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -56,6 +56,7 @@ hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/ hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 17761f5cf9dbbf2dcf665b7c04934188add20082 +hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 20285262657d1b482d132d20d755c8c330d55c1f lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git def7d2df2b0506d3d249334974f51e427c17a41c lib/lwip https://github.com/lwip-tcpip/lwip.git 159e31b689577dbf69cf0683bbaffbd71fa5ee10 diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index aed64782c..8843dd405 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -109,6 +109,8 @@ Supported MCUs | ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | WCH | CH32V307 | ✔ | | ✔ | ch32v307 | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | CH32F20x | ✔ | | ✔ | ch32f205 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ @@ -415,4 +417,5 @@ Tomu WCH --- -- `CH32V307V-R1-1v0 ` +- `CH32V307V-R1-1v0 `__ +- `CH32F205R-R0-1v0 `__ diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index e5d2bb608..4ce5c4139 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -161,6 +161,9 @@ #elif CFG_TUSB_MCU == OPT_MCU_TM4C123 #include "TM4C123.h" +#elif CFG_TUSB_MCU == OPT_MCU_CH32F20X + #include "ch32f20x.h" + #elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) // no header needed diff --git a/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h b/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h new file mode 100644 index 000000000..d5849bddb --- /dev/null +++ b/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023, Denis Krasutski + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED: need to wire pin LED1 to PC0 in the P1 header +#define LED_PORT GPIOC +#define LED_PIN GPIO_Pin_1 +#define LED_STATE_ON 0 +#define LED_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE) + +// Button: need to wire pin KEY to PC1 in the P1 header +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_Pin_0 +#define BUTTON_STATE_ACTIVE 0 +#define BUTTON_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE) + +// UART +#define UART_DEV USART2 +#define UART_DEV_IRQn USART2_IRQn +#define UART_DEV_IRQHandler USART2_IRQHandler +#define UART_DEV_GPIO_PORT GPIOA +#define UART_DEV_TX_PIN GPIO_Pin_2 +#define UART_DEV_CLK_EN() do { \ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); \ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); \ + } while(0) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.mk b/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.mk new file mode 100644 index 000000000..f0e9bf30f --- /dev/null +++ b/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.mk @@ -0,0 +1,7 @@ +LD_FILE = $(FAMILY_PATH)/ch32f205.ld + +SRC_S += \ + $(FAMILY_PATH)/startup_gcc_ch32f20x_d8c.s + +CFLAGS += \ + -DCH32F20x_D8C diff --git a/hw/bsp/ch32f20x/ch32f205.ld b/hw/bsp/ch32f20x/ch32f205.ld new file mode 100644 index 000000000..7c8d04cc5 --- /dev/null +++ b/hw/bsp/ch32f20x/ch32f205.ld @@ -0,0 +1,111 @@ +ENTRY(Reset_Handler) + +_Min_Heap_Size = 0x200; +_Min_Stack_Size = 0x400; + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K +} +SECTIONS +{ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) + . = ALIGN(4); + } >FLASH + + .text : + { + . = ALIGN(4); + _stext = .; + *(.text) + *(.text*) + *(.glue_7) + *(.glue_7t) + *(.eh_frame) + KEEP (*(.init)) + KEEP (*(.fini)) + . = ALIGN(4); + _etext = .; + } >FLASH + .rodata : + { + . = ALIGN(4); + *(.rodata) + *(.rodata*) + . = ALIGN(4); + } >FLASH + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + _sidata = LOADADDR(.data); + .data : + { + . = ALIGN(4); + _sdata = .; + *(.data) + *(.data*) + . = ALIGN(4); + _edata = .; + } >RAM AT> FLASH + . = ALIGN(4); + .bss : + { + _sbss = .; + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + _ebss = .; + __bss_end__ = _ebss; + } >RAM + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + __HeapStart = .; + . = . + _Min_Heap_Size; + __HeapEnd = .; + __StackLimit = .; + . = . + _Min_Stack_Size; + __StackTop = .; + . = ALIGN(4); + } >RAM +_estack = __StackTop; +_sstack = __StackLimit; + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/ch32f20x/ch32f20x_conf.h b/hw/bsp/ch32f20x/ch32f20x_conf.h new file mode 100644 index 000000000..f94da5dec --- /dev/null +++ b/hw/bsp/ch32f20x/ch32f20x_conf.h @@ -0,0 +1,40 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32f20x_conf.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/08/08 + * Description : Library configuration file. + ********************************************************************************* + * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. + * Attention: This software (modified or not) and binary are used for + * microcontroller manufactured by Nanjing Qinheng Microelectronics. + *******************************************************************************/ +#ifndef __CH32F20x_CONF_H +#define __CH32F20x_CONF_H + +#include "ch32f20x_adc.h" +#include "ch32f20x_bkp.h" +#include "ch32f20x_can.h" +#include "ch32f20x_crc.h" +#include "ch32f20x_dac.h" +#include "ch32f20x_dbgmcu.h" +#include "ch32f20x_dma.h" +#include "ch32f20x_exti.h" +#include "ch32f20x_flash.h" +#include "ch32f20x_fsmc.h" +#include "ch32f20x_gpio.h" +#include "ch32f20x_i2c.h" +#include "ch32f20x_iwdg.h" +#include "ch32f20x_pwr.h" +#include "ch32f20x_rcc.h" +#include "ch32f20x_rtc.h" +#include "ch32f20x_sdio.h" +#include "ch32f20x_spi.h" +#include "ch32f20x_tim.h" +#include "ch32f20x_usart.h" +#include "ch32f20x_wwdg.h" +#include "ch32f20x_it.h" +#include "ch32f20x_misc.h" + +#endif /* __CH32F20x_CONF_H */ + diff --git a/hw/bsp/ch32f20x/ch32f20x_it.c b/hw/bsp/ch32f20x/ch32f20x_it.c new file mode 100644 index 000000000..94e28e380 --- /dev/null +++ b/hw/bsp/ch32f20x/ch32f20x_it.c @@ -0,0 +1,35 @@ +#include "ch32f20x_it.h" + +#include "ch32f20x.h" + +/* -------------------------------------------------------------------------- */ + +void NMI_Handler(void) { + +} + +/* -------------------------------------------------------------------------- */ + +void MemManage_Handler(void) { + +} + +/* -------------------------------------------------------------------------- */ + +void BusFault_Handler(void) { + +} + +/* -------------------------------------------------------------------------- */ + +void UsageFault_Handler(void) { + +} + +/* -------------------------------------------------------------------------- */ + +void DebugMon_Handler(void) { + +} + +/* -------------------------------------------------------------------------- */ diff --git a/hw/bsp/ch32f20x/ch32f20x_it.h b/hw/bsp/ch32f20x/ch32f20x_it.h new file mode 100644 index 000000000..34f3bbf96 --- /dev/null +++ b/hw/bsp/ch32f20x/ch32f20x_it.h @@ -0,0 +1,25 @@ +/********************************** (C) COPYRIGHT ******************************* +* File Name : ch32f20x_it.h +* Author : WCH +* Version : V1.0.0 +* Date : 2021/08/08 +* Description : This file contains the headers of the interrupt handlers. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32F20xIT_H +#define __CH32F20xIT_H + +#include "ch32f20x.h" + +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void DebugMon_Handler(void); + + +#endif /* __CH32F20xIT_H */ diff --git a/hw/bsp/ch32f20x/core_cm3.h b/hw/bsp/ch32f20x/core_cm3.h new file mode 100644 index 000000000..c35a4eec3 --- /dev/null +++ b/hw/bsp/ch32f20x/core_cm3.h @@ -0,0 +1,11 @@ +/* There is core_cm3.h wrapper just to avoid warnings from CMSIS headers */ +/* if you want use original file add to make file: + INC += \ + $(TOP)/$(CH32F20X_SDK_SRC)/CMSIS +*/ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" + +#include <../../CMSIS/core_cm3.h> + +#pragma GCC diagnostic pop diff --git a/hw/bsp/ch32f20x/debug_uart.c b/hw/bsp/ch32f20x/debug_uart.c new file mode 100644 index 000000000..a595eb6f7 --- /dev/null +++ b/hw/bsp/ch32f20x/debug_uart.c @@ -0,0 +1,105 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Denis Krasutski + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#include + +#include "board.h" +#include "debug_uart.h" + +#define UART_RINGBUFFER_SIZE_TX 64 +#define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX-1) + +static char tx_buf[UART_RINGBUFFER_SIZE_TX]; +static unsigned int tx_produce = 0; +static volatile unsigned int tx_consume = 0; + +void UART_DEV_IRQHandler(void) +{ + if(USART_GetITStatus(UART_DEV, USART_IT_TC) != RESET) { + USART_ClearITPendingBit(UART_DEV, USART_IT_TC); + + if(tx_consume != tx_produce) { + USART_SendData(UART_DEV, tx_buf[tx_consume]); + tx_consume = (tx_consume + 1) & UART_RINGBUFFER_MASK_TX; + } + } +} + +void uart_write(char c) +{ + unsigned int tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; + + NVIC_DisableIRQ(UART_DEV_IRQn); + if((tx_consume != tx_produce) || (USART_GetFlagStatus(UART_DEV, USART_FLAG_TXE) == RESET)) { + tx_buf[tx_produce] = c; + tx_produce = tx_produce_next; + } else { + USART_SendData(UART_DEV, c); + } + NVIC_EnableIRQ(UART_DEV_IRQn); +} + +void uart_sync(void) +{ + while(tx_consume != tx_produce) { + //Waiting for transfer complete + } +} + +void usart_printf_init(uint32_t baudrate) +{ + tx_produce = 0; + tx_consume = 0; + + UART_DEV_CLK_EN(); + + GPIO_InitTypeDef gpio_config = { + .GPIO_Pin = UART_DEV_TX_PIN, + .GPIO_Speed = GPIO_Speed_50MHz, + .GPIO_Mode = GPIO_Mode_AF_PP, + }; + GPIO_Init(UART_DEV_GPIO_PORT, &gpio_config); + + USART_InitTypeDef uart_config = { + .USART_BaudRate = baudrate, + .USART_WordLength = USART_WordLength_8b, + .USART_StopBits = USART_StopBits_1, + .USART_Parity = USART_Parity_No, + .USART_HardwareFlowControl = USART_HardwareFlowControl_None, + .USART_Mode = USART_Mode_Tx, + }; + + USART_Init(UART_DEV, &uart_config); + USART_ITConfig(UART_DEV, USART_IT_TC, ENABLE); + USART_Cmd(UART_DEV, ENABLE); + + NVIC_InitTypeDef nvic_config = { + .NVIC_IRQChannel = UART_DEV_IRQn, + .NVIC_IRQChannelPreemptionPriority = 1, + .NVIC_IRQChannelSubPriority = 3, + .NVIC_IRQChannelCmd = ENABLE, + }; + NVIC_Init(&nvic_config); +} diff --git a/hw/bsp/ch32f20x/debug_uart.h b/hw/bsp/ch32f20x/debug_uart.h new file mode 100644 index 000000000..10284cf6f --- /dev/null +++ b/hw/bsp/ch32f20x/debug_uart.h @@ -0,0 +1,31 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Denis Krasutski + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include + +void uart_write(char c); +void uart_sync(void); +void usart_printf_init(uint32_t baudrate); diff --git a/hw/bsp/ch32f20x/family.c b/hw/bsp/ch32f20x/family.c new file mode 100644 index 000000000..9717832d6 --- /dev/null +++ b/hw/bsp/ch32f20x/family.c @@ -0,0 +1,141 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Denis Krasutski + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stdio.h" +#include "debug_uart.h" + +#include "ch32f20x.h" + +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +void USBHS_IRQHandler(void) +{ + tud_int_handler(0); +} + +void board_init(void) { + + /* Disable interrupts during init */ + __disable_irq(); + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(SystemCoreClock / 1000); +#endif + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USBHS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + usart_printf_init(115200); + + // USB HS Clock config + RCC_USBCLK48MConfig(RCC_USBCLK48MCLKSource_USBPHY); + RCC_USBHSPLLCLKConfig(RCC_HSBHSPLLCLKSource_HSE); + RCC_USBHSConfig(RCC_USBPLL_Div2); + RCC_USBHSPLLCKREFCLKConfig(RCC_USBHSPLLCKREFCLK_4M); + RCC_USBHSPHYPLLALIVEcmd(ENABLE); + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_USBHS, ENABLE); + + // LED + LED_CLOCK_EN(); + GPIO_InitTypeDef led_pin_config = { + .GPIO_Pin = LED_PIN, + .GPIO_Mode = GPIO_Mode_Out_OD, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(LED_PORT, &led_pin_config); + + // Button + BUTTON_CLOCK_EN(); + GPIO_InitTypeDef button_pin_config = { + .GPIO_Pin = BUTTON_PIN, + .GPIO_Mode = GPIO_Mode_IPU, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(BUTTON_PORT, &button_pin_config); + + /* Enable interrupts globally */ + __enable_irq(); +} + +#if CFG_TUSB_OS == OPT_OS_NONE + +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} + +#endif + +void HardFault_Handler(void) +{ + __asm("BKPT #0\n"); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_WriteBit(LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == GPIO_ReadInputDataBit(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t *buf, int len) +{ + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) +{ + int txsize = len; + while ( txsize-- ) + { + uart_write(*(uint8_t const*) buf); + buf++; + } + return len; +} diff --git a/hw/bsp/ch32f20x/family.mk b/hw/bsp/ch32f20x/family.mk new file mode 100644 index 000000000..c08451b9c --- /dev/null +++ b/hw/bsp/ch32f20x/family.mk @@ -0,0 +1,30 @@ +# Submodules +CH32F20X_SDK = hw/mcu/wch/ch32f20x +DEPS_SUBMODULES += $(CH32F20X_SDK) + +# WCH-SDK paths +CH32F20X_SDK_SRC = $(CH32F20X_SDK)/EVT/EXAM/SRC + +include $(TOP)/$(BOARD_PATH)/board.mk + +CPU_CORE ?= cortex-m3 + +CFLAGS += \ + -DCFG_TUSB_MCU=OPT_MCU_CH32F20X \ + -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + +SRC_C += \ + src/portable/wch/dcd_ch32_usbhs.c \ + $(CH32F20X_SDK_SRC)/StdPeriphDriver/src/ch32f20x_gpio.c \ + $(CH32F20X_SDK_SRC)/StdPeriphDriver/src/ch32f20x_misc.c \ + $(CH32F20X_SDK_SRC)/StdPeriphDriver/src/ch32f20x_rcc.c \ + $(CH32F20X_SDK_SRC)/StdPeriphDriver/src/ch32f20x_usart.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(CH32F20X_SDK_SRC)/StdPeriphDriver/inc + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 + +flash: flash-stlink diff --git a/hw/bsp/ch32f20x/startup_gcc_ch32f20x_d8c.s b/hw/bsp/ch32f20x/startup_gcc_ch32f20x_d8c.s new file mode 100644 index 000000000..2ecac2ac1 --- /dev/null +++ b/hw/bsp/ch32f20x/startup_gcc_ch32f20x_d8c.s @@ -0,0 +1,493 @@ +/** + ****************************************************************************** + * @file startup_gcc_ch32f20x_d8c.s + * @author Denis Krasutski + * @brief CH32F205 Devices vector table + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M3 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + */ + +.syntax unified +.cpu cortex-m3 +.thumb +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.section .text.Reset_Handler +.weak Reset_Handler +.type Reset_Handler, %function +Reset_Handler: + /* set stack pointer */ + ldr sp, =_estack + /* Call the clock system initialization function.*/ + bl SystemInit + /* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + + /* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss +FillZerobss: + str r3, [r2] + adds r2, r2, #4 +LoopFillZerobss: + cmp r2, r4 + bcc FillZerobss + /* Call static constructors */ + bl __libc_init_array + /* Call the application's entry point.*/ + bl main + bx lr + .size Reset_Handler, .-Reset_Handler + +.section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler + +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + +/******************************************************************************* + External Interrupts +*******************************************************************************/ +.word WWDG_IRQHandler +.word PVD_IRQHandler +.word TAMPER_IRQHandler +.word RTC_IRQHandler +.word FLASH_IRQHandler +.word RCC_IRQHandler +.word EXTI0_IRQHandler +.word EXTI1_IRQHandler +.word EXTI2_IRQHandler +.word EXTI3_IRQHandler +.word EXTI4_IRQHandler +.word DMA1_Channel1_IRQHandler +.word DMA1_Channel2_IRQHandler +.word DMA1_Channel3_IRQHandler +.word DMA1_Channel4_IRQHandler +.word DMA1_Channel5_IRQHandler +.word DMA1_Channel6_IRQHandler +.word DMA1_Channel7_IRQHandler +.word ADC1_2_IRQHandler +.word USB_HP_CAN1_TX_IRQHandler +.word USB_LP_CAN1_RX0_IRQHandler +.word CAN1_RX1_IRQHandler +.word CAN1_SCE_IRQHandler +.word EXTI9_5_IRQHandler +.word TIM1_BRK_IRQHandler +.word TIM1_UP_IRQHandler +.word TIM1_TRG_COM_IRQHandler +.word TIM1_CC_IRQHandler +.word TIM2_IRQHandler +.word TIM3_IRQHandler +.word TIM4_IRQHandler +.word I2C1_EV_IRQHandler +.word I2C1_ER_IRQHandler +.word I2C2_EV_IRQHandler +.word I2C2_ER_IRQHandler +.word SPI1_IRQHandler +.word SPI2_IRQHandler +.word USART1_IRQHandler +.word USART2_IRQHandler +.word USART3_IRQHandler +.word EXTI15_10_IRQHandler +.word RTCAlarm_IRQHandler +.word 0 +.word TIM8_BRK_IRQHandler +.word TIM8_UP_IRQHandler +.word TIM8_TRG_COM_IRQHandler +.word TIM8_CC_IRQHandler +.word RNG_IRQHandler +.word FSMC_IRQHandler +.word SDIO_IRQHandler +.word TIM5_IRQHandler +.word SPI3_IRQHandler +.word UART4_IRQHandler +.word UART5_IRQHandler +.word TIM6_IRQHandler +.word TIM7_IRQHandler +.word DMA2_Channel1_IRQHandler +.word DMA2_Channel2_IRQHandler +.word DMA2_Channel3_IRQHandler +.word DMA2_Channel4_IRQHandler +.word DMA2_Channel5_IRQHandler +.word ETH_IRQHandler +.word ETH_WKUP_IRQHandler +.word CAN2_TX_IRQHandler +.word CAN2_RX0_IRQHandler +.word CAN2_RX1_IRQHandler +.word CAN2_SCE_IRQHandler +.word OTG_FS_IRQHandler +.word USBHSWakeup_IRQHandler +.word USBHS_IRQHandler +.word DVP_IRQHandler +.word UART6_IRQHandler +.word UART7_IRQHandler +.word UART8_IRQHandler +.word TIM9_BRK_IRQHandler +.word TIM9_UP_IRQHandler +.word TIM9_TRG_COM_IRQHandler +.word TIM9_CC_IRQHandler +.word TIM10_BRK_IRQHandler +.word TIM10_UP_IRQHandler +.word TIM10_TRG_COM_IRQHandler +.word TIM10_CC_IRQHandler +.word DMA2_Channel6_IRQHandler +.word DMA2_Channel7_IRQHandler +.word DMA2_Channel8_IRQHandler +.word DMA2_Channel9_IRQHandler +.word DMA2_Channel10_IRQHandler +.word DMA2_Channel11_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases +* +*******************************************************************************/ +.weak NMI_Handler +.thumb_set NMI_Handler,Default_Handler + +.weak HardFault_Handler +.thumb_set HardFault_Handler,Default_Handler + +.weak MemManage_Handler +.thumb_set MemManage_Handler,Default_Handler + +.weak BusFault_Handler +.thumb_set BusFault_Handler,Default_Handler + +.weak UsageFault_Handler +.thumb_set UsageFault_Handler,Default_Handler + +.weak SVC_Handler +.thumb_set SVC_Handler,Default_Handler + +.weak DebugMon_Handler +.thumb_set DebugMon_Handler,Default_Handler + +.weak PendSV_Handler +.thumb_set PendSV_Handler,Default_Handler + +.weak SysTick_Handler +.thumb_set SysTick_Handler,Default_Handler + +.weak WWDG_IRQHandler +.thumb_set WWDG_IRQHandler,Default_Handler + +.weak PVD_IRQHandler +.thumb_set PVD_IRQHandler,Default_Handler + +.weak TAMPER_IRQHandler +.thumb_set TAMPER_IRQHandler,Default_Handler + +.weak RTC_IRQHandler +.thumb_set RTC_IRQHandler,Default_Handler + +.weak FLASH_IRQHandler +.thumb_set FLASH_IRQHandler,Default_Handler + +.weak RCC_IRQHandler +.thumb_set RCC_IRQHandler,Default_Handler + +.weak EXTI0_IRQHandler +.thumb_set EXTI0_IRQHandler,Default_Handler + +.weak EXTI1_IRQHandler +.thumb_set EXTI1_IRQHandler,Default_Handler + +.weak EXTI2_IRQHandler +.thumb_set EXTI2_IRQHandler,Default_Handler + +.weak EXTI3_IRQHandler +.thumb_set EXTI3_IRQHandler,Default_Handler + +.weak EXTI4_IRQHandler +.thumb_set EXTI4_IRQHandler,Default_Handler + +.weak DMA1_Channel1_IRQHandler +.thumb_set DMA1_Channel1_IRQHandler,Default_Handler + +.weak DMA1_Channel2_IRQHandler +.thumb_set DMA1_Channel2_IRQHandler,Default_Handler + +.weak DMA1_Channel3_IRQHandler +.thumb_set DMA1_Channel3_IRQHandler,Default_Handler + +.weak DMA1_Channel4_IRQHandler +.thumb_set DMA1_Channel4_IRQHandler,Default_Handler + +.weak DMA1_Channel5_IRQHandler +.thumb_set DMA1_Channel5_IRQHandler,Default_Handler + +.weak DMA1_Channel6_IRQHandler +.thumb_set DMA1_Channel6_IRQHandler,Default_Handler + +.weak DMA1_Channel7_IRQHandler +.thumb_set DMA1_Channel7_IRQHandler,Default_Handler + +.weak ADC1_2_IRQHandler +.thumb_set ADC1_2_IRQHandler,Default_Handler + +.weak USB_HP_CAN1_TX_IRQHandler +.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler + +.weak USB_LP_CAN1_RX0_IRQHandler +.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler + +.weak CAN1_RX1_IRQHandler +.thumb_set CAN1_RX1_IRQHandler,Default_Handler + +.weak CAN1_SCE_IRQHandler +.thumb_set CAN1_SCE_IRQHandler,Default_Handler + +.weak EXTI9_5_IRQHandler +.thumb_set EXTI9_5_IRQHandler,Default_Handler + +.weak TIM1_BRK_IRQHandler +.thumb_set TIM1_BRK_IRQHandler,Default_Handler + +.weak TIM1_UP_IRQHandler +.thumb_set TIM1_UP_IRQHandler,Default_Handler + +.weak TIM1_TRG_COM_IRQHandler +.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler + +.weak TIM1_CC_IRQHandler +.thumb_set TIM1_CC_IRQHandler,Default_Handler + +.weak TIM2_IRQHandler +.thumb_set TIM2_IRQHandler,Default_Handler + +.weak TIM3_IRQHandler +.thumb_set TIM3_IRQHandler,Default_Handler + +.weak TIM4_IRQHandler +.thumb_set TIM4_IRQHandler,Default_Handler + +.weak I2C1_EV_IRQHandler +.thumb_set I2C1_EV_IRQHandler,Default_Handler + +.weak I2C1_ER_IRQHandler +.thumb_set I2C1_ER_IRQHandler,Default_Handler + +.weak I2C2_EV_IRQHandler +.thumb_set I2C2_EV_IRQHandler,Default_Handler + +.weak I2C2_ER_IRQHandler +.thumb_set I2C2_ER_IRQHandler,Default_Handler + +.weak SPI1_IRQHandler +.thumb_set SPI1_IRQHandler,Default_Handler + +.weak SPI2_IRQHandler +.thumb_set SPI2_IRQHandler,Default_Handler + +.weak USART1_IRQHandler +.thumb_set USART1_IRQHandler,Default_Handler + +.weak USART2_IRQHandler +.thumb_set USART2_IRQHandler,Default_Handler + +.weak USART3_IRQHandler +.thumb_set USART3_IRQHandler,Default_Handler + +.weak EXTI15_10_IRQHandler +.thumb_set EXTI15_10_IRQHandler,Default_Handler + +.weak RTCAlarm_IRQHandler +.thumb_set RTCAlarm_IRQHandler,Default_Handler + +.weak TIM8_BRK_IRQHandler +.thumb_set TIM8_BRK_IRQHandler,Default_Handler + +.weak TIM8_UP_IRQHandler +.thumb_set TIM8_UP_IRQHandler,Default_Handler + +.weak TIM8_TRG_COM_IRQHandler +.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler + +.weak TIM8_CC_IRQHandler +.thumb_set TIM8_CC_IRQHandler,Default_Handler + +.weak RNG_IRQHandler +.thumb_set RNG_IRQHandler,Default_Handler + +.weak FSMC_IRQHandler +.thumb_set FSMC_IRQHandler,Default_Handler + +.weak SDIO_IRQHandler +.thumb_set SDIO_IRQHandler,Default_Handler + +.weak TIM5_IRQHandler +.thumb_set TIM5_IRQHandler,Default_Handler + +.weak SPI3_IRQHandler +.thumb_set SPI3_IRQHandler,Default_Handler + +.weak UART4_IRQHandler +.thumb_set UART4_IRQHandler,Default_Handler + +.weak UART5_IRQHandler +.thumb_set UART5_IRQHandler,Default_Handler + +.weak TIM6_IRQHandler +.thumb_set TIM6_IRQHandler,Default_Handler + +.weak TIM7_IRQHandler +.thumb_set TIM7_IRQHandler,Default_Handler + +.weak DMA2_Channel1_IRQHandler +.thumb_set DMA2_Channel1_IRQHandler,Default_Handler + +.weak DMA2_Channel2_IRQHandler +.thumb_set DMA2_Channel2_IRQHandler,Default_Handler + +.weak DMA2_Channel3_IRQHandler +.thumb_set DMA2_Channel3_IRQHandler,Default_Handler + +.weak DMA2_Channel4_IRQHandler +.thumb_set DMA2_Channel4_IRQHandler,Default_Handler + +.weak DMA2_Channel5_IRQHandler +.thumb_set DMA2_Channel5_IRQHandler,Default_Handler + +.weak ETH_IRQHandler +.thumb_set ETH_IRQHandler,Default_Handler + +.weak ETH_WKUP_IRQHandler +.thumb_set ETH_WKUP_IRQHandler,Default_Handler + +.weak CAN2_TX_IRQHandler +.thumb_set CAN2_TX_IRQHandler,Default_Handler + +.weak CAN2_RX0_IRQHandler +.thumb_set CAN2_RX0_IRQHandler,Default_Handler + +.weak CAN2_RX1_IRQHandler +.thumb_set CAN2_RX1_IRQHandler,Default_Handler + +.weak CAN2_SCE_IRQHandler +.thumb_set CAN2_SCE_IRQHandler,Default_Handler + +.weak OTG_FS_IRQHandler +.thumb_set OTG_FS_IRQHandler,Default_Handler + +.weak USBHSWakeup_IRQHandler +.thumb_set USBHSWakeup_IRQHandler,Default_Handler + +.weak USBHS_IRQHandler +.thumb_set USBHS_IRQHandler,Default_Handler + +.weak DVP_IRQHandler +.thumb_set DVP_IRQHandler,Default_Handler + +.weak UART6_IRQHandler +.thumb_set UART6_IRQHandler,Default_Handler + +.weak UART7_IRQHandler +.thumb_set UART7_IRQHandler,Default_Handler + +.weak UART8_IRQHandler +.thumb_set UART8_IRQHandler,Default_Handler + +.weak TIM9_BRK_IRQHandler +.thumb_set TIM9_BRK_IRQHandler,Default_Handler + +.weak TIM9_UP_IRQHandler +.thumb_set TIM9_UP_IRQHandler,Default_Handler + +.weak TIM9_TRG_COM_IRQHandler +.thumb_set TIM9_TRG_COM_IRQHandler,Default_Handler + +.weak TIM9_CC_IRQHandler +.thumb_set TIM9_CC_IRQHandler,Default_Handler + +.weak TIM10_BRK_IRQHandler +.thumb_set TIM10_BRK_IRQHandler,Default_Handler + +.weak TIM10_UP_IRQHandler +.thumb_set TIM10_UP_IRQHandler,Default_Handler + +.weak TIM10_TRG_COM_IRQHandler +.thumb_set TIM10_TRG_COM_IRQHandler,Default_Handler + +.weak TIM10_CC_IRQHandler +.thumb_set TIM10_CC_IRQHandler,Default_Handler + +.weak DMA2_Channel6_IRQHandler +.thumb_set DMA2_Channel6_IRQHandler,Default_Handler + +.weak DMA2_Channel7_IRQHandler +.thumb_set DMA2_Channel7_IRQHandler,Default_Handler + +.weak DMA2_Channel8_IRQHandler +.thumb_set DMA2_Channel8_IRQHandler,Default_Handler + +.weak DMA2_Channel9_IRQHandler +.thumb_set DMA2_Channel9_IRQHandler,Default_Handler + +.weak DMA2_Channel10_IRQHandler +.thumb_set DMA2_Channel10_IRQHandler,Default_Handler + +.weak DMA2_Channel11_IRQHandler +.thumb_set DMA2_Channel11_IRQHandler,Default_Handler diff --git a/hw/bsp/ch32f20x/system_ch32f20x.c b/hw/bsp/ch32f20x/system_ch32f20x.c new file mode 100644 index 000000000..0a59b9287 --- /dev/null +++ b/hw/bsp/ch32f20x/system_ch32f20x.c @@ -0,0 +1,1122 @@ +/********************************** (C) COPYRIGHT ******************************* +* File Name : system_ch32f20x.c +* Author : WCH +* Version : V1.0.0 +* Date : 2021/08/08 +* Description : CH32F20x Device Peripheral Access Layer System Source File. +* For CH32F208 HSE = 32Mhz +* For others HSE = 8Mhz +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32f20x.h" + +/* +* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after +* reset the HSI is used as SYSCLK source). +* If none of the define below is enabled, the HSI is used as System clock source. +*/ + +//#define SYSCLK_FREQ_HSE HSE_VALUE +//#define SYSCLK_FREQ_48MHz_HSE 48000000 +//#define SYSCLK_FREQ_56MHz_HSE 56000000 +//#define SYSCLK_FREQ_72MHz_HSE 72000000 +#define SYSCLK_FREQ_96MHz_HSE 96000000 +//#define SYSCLK_FREQ_120MHz_HSE 120000000 +//#define SYSCLK_FREQ_144MHz_HSE 144000000 +//#define SYSCLK_FREQ_HSI HSI_VALUE +//#define SYSCLK_FREQ_48MHz_HSI 48000000 +//#define SYSCLK_FREQ_56MHz_HSI 56000000 +//#define SYSCLK_FREQ_72MHz_HSI 72000000 +//#define SYSCLK_FREQ_96MHz_HSI 96000000 +//#define SYSCLK_FREQ_120MHz_HSI 120000000 +//#define SYSCLK_FREQ_144MHz_HSI 144000000 + + +/* Uncomment the following line if you need to relocate your vector Table in Internal SRAM */ +/* #define VECT_TAB_SRAM */ + +/* Vector Table base offset field This value must be a multiple of 0x200 */ +#define VECT_TAB_OFFSET 0x0 + +/* Clock Definitions */ +#ifdef SYSCLK_FREQ_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_96MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_120MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_144MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_96MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_120MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_144MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /* System Clock Frequency (Core Clock) */ +#else +uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */ + +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/* system_private_function_proto_types */ +static void SetSysClock( void ); + +#ifdef SYSCLK_FREQ_HSE +static void SetSysClockToHSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSE +static void SetSysClockTo48_HSE( void ); +#elif defined SYSCLK_FREQ_56MHz_HSE +static void SetSysClockTo56_HSE( void ); +#elif defined SYSCLK_FREQ_72MHz_HSE +static void SetSysClockTo72_HSE( void ); +#elif defined SYSCLK_FREQ_96MHz_HSE +static void SetSysClockTo96_HSE( void ); +#elif defined SYSCLK_FREQ_120MHz_HSE +static void SetSysClockTo120_HSE( void ); +#elif defined SYSCLK_FREQ_144MHz_HSE +static void SetSysClockTo144_HSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSI +static void SetSysClockTo48_HSI( void ); +#elif defined SYSCLK_FREQ_56MHz_HSI +static void SetSysClockTo56_HSI( void ); +#elif defined SYSCLK_FREQ_72MHz_HSI +static void SetSysClockTo72_HSI( void ); +#elif defined SYSCLK_FREQ_96MHz_HSI +static void SetSysClockTo96_HSI( void ); +#elif defined SYSCLK_FREQ_120MHz_HSI +static void SetSysClockTo120_HSI( void ); +#elif defined SYSCLK_FREQ_144MHz_HSI +static void SetSysClockTo144_HSI( void ); + +#endif + + +/********************************************************************* + * @fn SystemInit + * + * @brief Setup the microcontroller system Initialize the Embedded Flash Interface, + * the PLL and update the SystemCoreClock variable. + * + * @return none + */ +void SystemInit( void ) +{ + RCC->CTLR |= ( uint32_t )0x00000001; + +#ifdef CH32F20x_D8C + RCC->CFGR0 &= ( uint32_t )0xF8FF0000; +#else + RCC->CFGR0 &= ( uint32_t )0xF0FF0000; +#endif + + RCC->CTLR &= ( uint32_t )0xFEF6FFFF; + RCC->CTLR &= ( uint32_t )0xFFFBFFFF; + RCC->CFGR0 &= ( uint32_t )0xFF80FFFF; +#ifdef CH32F20x_D8C + RCC->CTLR &= ( uint32_t )0xEBFFFFFF; + RCC->INTR = 0x00FF0000; + RCC->CFGR2 = 0x00000000; +#else + RCC->INTR = 0x009F0000; +#endif + + SetSysClock(); + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/********************************************************************* + * @fn SystemCoreClockUpdate + * + * @brief Update SystemCoreClock variable according to Clock Register Values. + * + * @return none + */ +void SystemCoreClockUpdate( void ) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + uint8_t Pll_6_5 = 0; + +#if defined (CH32F20x_D8C) + uint8_t Pll2mull = 0; + +#endif + + tmp = RCC->CFGR0 & RCC_SWS; + + switch( tmp ) + { + case 0x00: + SystemCoreClock = HSI_VALUE; + break; + case 0x04: + SystemCoreClock = HSE_VALUE; + break; + case 0x08: + pllmull = RCC->CFGR0 & RCC_PLLMULL; + pllsource = RCC->CFGR0 & RCC_PLLSRC; + pllmull = ( pllmull >> 18 ) + 2; + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + if( pllmull == 17 ) + { + pllmull = 18; + } +#else + if( pllmull == 2 ) + { + pllmull = 18; + } + if( pllmull == 15 ) + { + pllmull = 13; /* *6.5 */ + Pll_6_5 = 1; + } + if( pllmull == 16 ) + { + pllmull = 15; + } + if( pllmull == 17 ) + { + pllmull = 16; + } +#endif + + if( pllsource == 0x00 ) + { + if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE) SystemCoreClock = HSI_VALUE * pllmull; + else SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { +#if defined (CH32F20x_D8C) + if(RCC->CFGR2 & (1<<16)){ /* PLL2 */ + SystemCoreClock = HSE_VALUE/(((RCC->CFGR2 & 0xF0)>>4) + 1); /* PREDIV2 */ + + Pll2mull = (uint8_t)((RCC->CFGR2 & 0xF00)>>8); + + if(Pll2mull == 0) SystemCoreClock = (SystemCoreClock * 5)>>1; + else if(Pll2mull == 1) SystemCoreClock = (SystemCoreClock * 25)>>1; + else if(Pll2mull == 15) SystemCoreClock = SystemCoreClock * 20; + else SystemCoreClock = SystemCoreClock * (Pll2mull + 2); + + SystemCoreClock = SystemCoreClock/((RCC->CFGR2 & 0xF) + 1); /* PREDIV1 */ + } + else{/* HSE */ + SystemCoreClock = HSE_VALUE/((RCC->CFGR2 & 0xF) + 1); /* PREDIV1 */ + } + + SystemCoreClock = SystemCoreClock * pllmull; +#else + +#if defined (CH32F20x_D8W) + if((RCC->CFGR0 & (3<<22)) == (3<<22)) + { + SystemCoreClock = ((HSE_VALUE>>1)) * pllmull; + } + else +#endif + if( ( RCC->CFGR0 & RCC_PLLXTPRE ) != ( uint32_t )RESET ) + { +#ifdef CH32F20x_D8W + SystemCoreClock = ( ( HSE_VALUE >> 2 ) >> 1 ) * pllmull; +#else + SystemCoreClock = ( HSE_VALUE >> 1 ) * pllmull; +#endif + } + else + { +#ifdef CH32F20x_D8W + SystemCoreClock = ( HSE_VALUE >> 2 ) * pllmull; +#else + SystemCoreClock = HSE_VALUE * pllmull; +#endif + + } +#endif + } + + if( Pll_6_5 == 1 ) SystemCoreClock = ( SystemCoreClock / 2 ); + + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + + tmp = AHBPrescTable[( ( RCC->CFGR0 & RCC_HPRE ) >> 4 )]; + SystemCoreClock >>= tmp; +} + + + +/********************************************************************* + * @fn SetSysClock + * + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClock( void ) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_48MHz_HSE + SetSysClockTo48_HSE(); +#elif defined SYSCLK_FREQ_56MHz_HSE + SetSysClockTo56_HSE(); +#elif defined SYSCLK_FREQ_72MHz_HSE + SetSysClockTo72_HSE(); +#elif defined SYSCLK_FREQ_96MHz_HSE + SetSysClockTo96_HSE(); +#elif defined SYSCLK_FREQ_120MHz_HSE + SetSysClockTo120_HSE(); +#elif defined SYSCLK_FREQ_144MHz_HSE + SetSysClockTo144_HSE(); +#elif defined SYSCLK_FREQ_48MHz_HSI + SetSysClockTo48_HSI(); +#elif defined SYSCLK_FREQ_56MHz_HSI + SetSysClockTo56_HSI(); +#elif defined SYSCLK_FREQ_72MHz_HSI + SetSysClockTo72_HSI(); +#elif defined SYSCLK_FREQ_96MHz_HSI + SetSysClockTo96_HSI(); +#elif defined SYSCLK_FREQ_120MHz_HSI + SetSysClockTo120_HSI(); +#elif defined SYSCLK_FREQ_144MHz_HSI + SetSysClockTo144_HSI(); + +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + * source (default after reset) + */ +} + + +#ifdef SYSCLK_FREQ_HSE + +/********************************************************************* + * @fn SetSysClockToHSE + * + * @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockToHSE( void ) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + + RCC->CTLR |= ( ( uint32_t )RCC_HSEON ); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } + while( ( HSEStatus == 0 ) && ( StartUpCounter != HSE_STARTUP_TIMEOUT ) ); + + if( ( RCC->CTLR & RCC_HSERDY ) != RESET ) + { + HSEStatus = ( uint32_t )0x01; + } + else + { + HSEStatus = ( uint32_t )0x00; + } + + if( HSEStatus == ( uint32_t )0x01 ) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV1; + + /* Select HSE as system clock source + * CH32F20x_D6 (HSE=8Mhz) + * CH32F20x_D8 (HSE=8Mhz) + * CH32F20x_D8W (HSE=32Mhz) + */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x04 ) + { + } + } + else + { + /* If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo48_HSE + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSE( void ) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + + RCC->CTLR |= ( ( uint32_t )RCC_HSEON ); + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } + while( ( HSEStatus == 0 ) && ( StartUpCounter != HSE_STARTUP_TIMEOUT ) ); + + if( ( RCC->CTLR & RCC_HSERDY ) != RESET ) + { + HSEStatus = ( uint32_t )0x01; + } + else + { + HSEStatus = ( uint32_t )0x00; + } + + if( HSEStatus == ( uint32_t )0x01 ) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* CH32F20x_D6-PLL configuration: PLLCLK = HSE * 6 = 48 MHz (HSE=8Mhz) + * CH32F20x_D8-PLL configuration: PLLCLK = HSE * 6 = 48 MHz (HSE=8Mhz) + * CH32F20x_D8W-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz(HSE=32Mhz) + */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo56_HSE + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSE( void ) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ( ( uint32_t )RCC_HSEON ); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } + while( ( HSEStatus == 0 ) && ( StartUpCounter != HSE_STARTUP_TIMEOUT ) ); + + if( ( RCC->CTLR & RCC_HSERDY ) != RESET ) + { + HSEStatus = ( uint32_t )0x01; + } + else + { + HSEStatus = ( uint32_t )0x00; + } + + if( HSEStatus == ( uint32_t )0x01 ) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* CH32F20x_D6-PLL configuration: PLLCLK = HSE * 7 = 56 MHz (HSE=8Mhz) + * CH32F20x_D8-PLL configuration: PLLCLK = HSE * 7 = 56 MHz (HSE=8Mhz) + * CH32F20x_D8W-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz(HSE=32Mhz) + */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo72_HSE + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSE( void ) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ( ( uint32_t )RCC_HSEON ); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } + while( ( HSEStatus == 0 ) && ( StartUpCounter != HSE_STARTUP_TIMEOUT ) ); + + if( ( RCC->CTLR & RCC_HSERDY ) != RESET ) + { + HSEStatus = ( uint32_t )0x01; + } + else + { + HSEStatus = ( uint32_t )0x00; + } + + if( HSEStatus == ( uint32_t )0x01 ) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* CH32F20x_D6-PLL configuration: PLLCLK = HSE * 9 = 72 MHz (HSE=8Mhz) + * CH32F20x_D8-PLL configuration: PLLCLK = HSE * 9 = 72 MHz (HSE=8Mhz) + * CH32F20x_D8W-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz(HSE=32Mhz) + */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + + +#elif defined SYSCLK_FREQ_96MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo96_HSE + * + * @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo96_HSE( void ) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ( ( uint32_t )RCC_HSEON ); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } + while( ( HSEStatus == 0 ) && ( StartUpCounter != HSE_STARTUP_TIMEOUT ) ); + + if( ( RCC->CTLR & RCC_HSERDY ) != RESET ) + { + HSEStatus = ( uint32_t )0x01; + } + else + { + HSEStatus = ( uint32_t )0x00; + } + + if( HSEStatus == ( uint32_t )0x01 ) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* CH32F20x_D6-PLL configuration: PLLCLK = HSE * 12 = 96 MHz (HSE=8Mhz) + * CH32F20x_D8-PLL configuration: PLLCLK = HSE * 12 = 96 MHz (HSE=8Mhz) + * CH32F20x_D8W-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz(HSE=32Mhz) + */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + + +#elif defined SYSCLK_FREQ_120MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo120_HSE + * + * @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo120_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { +#if defined (CH32F20x_D8W) + RCC->CFGR0 |= (uint32_t)(3<<22); + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV2; +#else + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; +#endif + + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32F20x_D6-PLL configuration: PLLCLK = HSE * 15 = 120 MHz (HSE=8Mhz) + * CH32F20x_D8-PLL configuration: PLLCLK = HSE * 15 = 120 MHz (HSE=8Mhz) + * CH32F20x_D8W-PLL configuration: PLLCLK = HSE/2 * 15 = 240 MHz(HSE=32Mhz) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15); +#else + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15_EXTEN); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + + + +#elif defined SYSCLK_FREQ_144MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo144_HSE + * + * @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo144_HSE( void ) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ( ( uint32_t )RCC_HSEON ); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } + while( ( HSEStatus == 0 ) && ( StartUpCounter != HSE_STARTUP_TIMEOUT ) ); + + if( ( RCC->CTLR & RCC_HSERDY ) != RESET ) + { + HSEStatus = ( uint32_t )0x01; + } + else + { + HSEStatus = ( uint32_t )0x00; + } + + if( HSEStatus == ( uint32_t )0x01 ) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* CH32F20x_D6-PLL configuration: PLLCLK = HSE * 18 = 144 MHz (HSE=8Mhz) + * CH32F20x_D8-PLL configuration: PLLCLK = HSE * 18 = 144 MHz (HSE=8Mhz) + * CH32F20x_D8W-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz(HSE=32Mhz) + */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo48_HSI + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSI( void ) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo56_HSI + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSI( void ) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 7 = 56 MHz */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo72_HSI + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSI( void ) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } +} + + +#elif defined SYSCLK_FREQ_96MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo96_HSI + * + * @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo96_HSI( void ) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 12 = 96 MHz */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } +} + + +#elif defined SYSCLK_FREQ_120MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo120_HSI + * + * @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo120_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 15 = 120 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + + +#elif defined SYSCLK_FREQ_144MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo144_HSI + * + * @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo144_HSI( void ) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= ( uint32_t )RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 18 = 144 MHz */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL ) ); + +#if defined (CH32F20x_D6) || defined (CH32F20x_D8) || defined (CH32F20x_D8W) + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18 ); +#else + RCC->CFGR0 |= ( uint32_t )( RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18_EXTEN ); +#endif + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while( ( RCC->CTLR & RCC_PLLRDY ) == 0 ) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= ( uint32_t )( ( uint32_t )~( RCC_SW ) ); + RCC->CFGR0 |= ( uint32_t )RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while( ( RCC->CFGR0 & ( uint32_t )RCC_SWS ) != ( uint32_t )0x08 ) + { + } +} + + +#endif diff --git a/hw/bsp/ch32f20x/system_ch32f20x.h b/hw/bsp/ch32f20x/system_ch32f20x.h new file mode 100644 index 000000000..734c80a5a --- /dev/null +++ b/hw/bsp/ch32f20x/system_ch32f20x.h @@ -0,0 +1,28 @@ +/********************************** (C) COPYRIGHT ******************************* +* File Name : system_ch32f20x.h +* Author : WCH +* Version : V1.0.0 +* Date : 2021/08/08 +* Description : CH32F20x Device Peripheral Access Layer System Header File. +*******************************************************************************/ +#ifndef __SYSTEM_CH32F20x_H +#define __SYSTEM_CH32F20x_H + +#ifdef __cplusplus + extern "C" { +#endif + +extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ + +/* System_Exported_Functions */ +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); + +#ifdef __cplusplus +} +#endif + +#endif /*__CH32F20x_SYSTEM_H */ + + + diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 4b06cf429..45f0317ee 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -29,7 +29,7 @@ CFLAGS += \ -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED SRC_C += \ - src/portable/wch/ch32v307/dcd_usbhs.c \ + src/portable/wch/dcd_ch32_usbhs.c \ $(CH32V307_SDK_SRC)/Core/core_riscv.c \ $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_gpio.c \ $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_misc.c \ diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 8807ff8aa..a72976ae9 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -383,6 +383,10 @@ #elif TU_CHECK_MCU(OPT_MCU_CH32V307) #define TUP_DCD_ENDPOINT_MAX 16 #define TUP_RHPORT_HIGHSPEED 1 + +#elif TU_CHECK_MCU(OPT_MCU_CH32F20X) + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_RHPORT_HIGHSPEED 1 #endif diff --git a/src/portable/wch/ch32_usbhs_reg.h b/src/portable/wch/ch32_usbhs_reg.h new file mode 100644 index 000000000..9b956231f --- /dev/null +++ b/src/portable/wch/ch32_usbhs_reg.h @@ -0,0 +1,349 @@ +#ifndef _USB_CH32_USBHS_REG_H +#define _USB_CH32_USBHS_REG_H + +#if (CFG_TUSB_MCU == OPT_MCU_CH32V307) +#include +#elif (CFG_TUSB_MCU == OPT_MCU_CH32F20X) +#include +#endif + +/******************* GLOBAL ******************/ + +// USB CONTROL +#define USBHS_CONTROL_OFFSET 0x00 +#define USBHS_DMA_EN (1 << 0) +#define USBHS_ALL_CLR (1 << 1) +#define USBHS_FORCE_RST (1 << 2) +#define USBHS_INT_BUSY_EN (1 << 3) +#define USBHS_DEV_PU_EN (1 << 4) +#define USBHS_SPEED_MASK (3 << 5) +#define USBHS_FULL_SPEED (0 << 5) +#define USBHS_HIGH_SPEED (1 << 5) +#define USBHS_LOW_SPEED (2 << 5) +#define USBHS_HOST_MODE (1 << 7) + +// USB_INT_EN +#define USBHS_INT_EN_OFFSET 0x02 +#define USBHS_BUS_RST_EN (1 << 0) +#define USBHS_DETECT_EN (1 << 0) +#define USBHS_TRANSFER_EN (1 << 1) +#define USBHS_SUSPEND_EN (1 << 2) +#define USBHS_SOF_ACT_EN (1 << 3) +#define USBHS_FIFO_OV_EN (1 << 4) +#define USBHS_SETUP_ACT_EN (1 << 5) +#define USBHS_ISO_ACT_EN (1 << 6) +#define USBHS_DEV_NAK_EN (1 << 7) + +// USB DEV AD +#define USBHS_DEV_AD_OFFSET 0x03 +// USB FRAME_NO +#define USBHS_FRAME_NO_OFFSET 0x04 +// USB SUSPEND +#define USBHS_SUSPEND_OFFSET 0x06 +#define USBHS_DEV_REMOTE_WAKEUP (1 << 2) +#define USBHS_LINESTATE_MASK (2 << 4) /* Read Only */ + +// RESERVED0 + +// USB SPEED TYPE +#define USBHS_SPEED_TYPE_OFFSET 0x08 +#define USBSPEED_MASK (0x03) + +// USB_MIS_ST +#define USBHS_MIS_ST_OFFSET 0x09 +#define USBHS_SPLIT_CAN (1 << 0) +#define USBHS_ATTACH (1 << 1) +#define USBHS_SUSPEND (1 << 2) +#define USBHS_BUS_RESET (1 << 3) +#define USBHS_R_FIFO_RDY (1 << 4) +#define USBHS_SIE_FREE (1 << 5) +#define USBHS_SOF_ACT (1 << 6) +#define USBHS_SOF_PRES (1 << 7) + +// INT_FLAG +#define USBHS_INT_FLAG_OFFSET 0x0A +#define USBHS_BUS_RST_FLAG (1 << 0) +#define USBHS_DETECT_FLAG (1 << 0) +#define USBHS_TRANSFER_FLAG (1 << 1) +#define USBHS_SUSPEND_FLAG (1 << 2) +#define USBHS_HST_SOF_FLAG (1 << 3) +#define USBHS_FIFO_OV_FLAG (1 << 4) +#define USBHS_SETUP_FLAG (1 << 5) +#define USBHS_ISO_ACT_FLAG (1 << 6) + +// INT_ST +#define USBHS_INT_ST_OFFSET 0x0B +#define USBHS_DEV_UIS_IS_NAK (1 << 7) +#define USBHS_DEV_UIS_TOG_OK (1 << 6) +#define MASK_UIS_TOKEN (3 << 4) +#define MASK_UIS_ENDP (0x0F) +#define MASK_UIS_H_RES (0x0F) + +#define USBHS_TOGGLE_OK (0x40) +#define USBHS_HOST_RES (0x0f) + +//USB_RX_LEN +#define USBHS_RX_LEN_OFFSET 0x0C +/******************* DEVICE ******************/ + +//UEP_CONFIG +#define USBHS_UEP_CONFIG_OFFSET 0x10 +#define USBHS_EP0_T_EN (1 << 0) +#define USBHS_EP0_R_EN (1 << 16) + +#define USBHS_EP1_T_EN (1 << 1) +#define USBHS_EP1_R_EN (1 << 17) + +#define USBHS_EP2_T_EN (1 << 2) +#define USBHS_EP2_R_EN (1 << 18) + +#define USBHS_EP3_T_EN (1 << 3) +#define USBHS_EP3_R_EN (1 << 19) + +#define USBHS_EP4_T_EN (1 << 4) +#define USBHS_EP4_R_EN (1 << 20) + +#define USBHS_EP5_T_EN (1 << 5) +#define USBHS_EP5_R_EN (1 << 21) + +#define USBHS_EP6_T_EN (1 << 6) +#define USBHS_EP6_R_EN (1 << 22) + +#define USBHS_EP7_T_EN (1 << 7) +#define USBHS_EP7_R_EN (1 << 23) + +#define USBHS_EP8_T_EN (1 << 8) +#define USBHS_EP8_R_EN (1 << 24) + +#define USBHS_EP9_T_EN (1 << 9) +#define USBHS_EP9_R_EN (1 << 25) + +#define USBHS_EP10_T_EN (1 << 10) +#define USBHS_EP10_R_EN (1 << 26) + +#define USBHS_EP11_T_EN (1 << 11) +#define USBHS_EP11_R_EN (1 << 27) + +#define USBHS_EP12_T_EN (1 << 12) +#define USBHS_EP12_R_EN (1 << 28) + +#define USBHS_EP13_T_EN (1 << 13) +#define USBHS_EP13_R_EN (1 << 29) + +#define USBHS_EP14_T_EN (1 << 14) +#define USBHS_EP14_R_EN (1 << 30) + +#define USBHS_EP15_T_EN (1 << 15) +#define USBHS_EP15_R_EN (1 << 31) + +//UEP_TYPE +#define USBHS_UEP_TYPE_OFFSET 0x14 +#define USBHS_EP0_T_TYP (1 << 0) +#define USBHS_EP0_R_TYP (1 << 16) + +#define USBHS_EP1_T_TYP (1 << 1) +#define USBHS_EP1_R_TYP (1 << 17) + +#define USBHS_EP2_T_TYP (1 << 2) +#define USBHS_EP2_R_TYP (1 << 18) + +#define USBHS_EP3_T_TYP (1 << 3) +#define USBHS_EP3_R_TYP (1 << 19) + +#define USBHS_EP4_T_TYP (1 << 4) +#define USBHS_EP4_R_TYP (1 << 20) + +#define USBHS_EP5_T_TYP (1 << 5) +#define USBHS_EP5_R_TYP (1 << 21) + +#define USBHS_EP6_T_TYP (1 << 6) +#define USBHS_EP6_R_TYP (1 << 22) + +#define USBHS_EP7_T_TYP (1 << 7) +#define USBHS_EP7_R_TYP (1 << 23) + +#define USBHS_EP8_T_TYP (1 << 8) +#define USBHS_EP8_R_TYP (1 << 24) + +#define USBHS_EP9_T_TYP (1 << 8) +#define USBHS_EP9_R_TYP (1 << 25) + +#define USBHS_EP10_T_TYP (1 << 10) +#define USBHS_EP10_R_TYP (1 << 26) + +#define USBHS_EP11_T_TYP (1 << 11) +#define USBHS_EP11_R_TYP (1 << 27) + +#define USBHS_EP12_T_TYP (1 << 12) +#define USBHS_EP12_R_TYP (1 << 28) + +#define USBHS_EP13_T_TYP (1 << 13) +#define USBHS_EP13_R_TYP (1 << 29) + +#define USBHS_EP14_T_TYP (1 << 14) +#define USBHS_EP14_R_TYP (1 << 30) + +#define USBHS_EP15_T_TYP (1 << 15) +#define USBHS_EP15_R_TYP (1 << 31) + +/* BUF_MOD UEP1~15 */ +#define USBHS_BUF_MOD_OFFSET 0x18 +#define USBHS_EP0_BUF_MOD (1 << 0) +#define USBHS_EP0_ISO_BUF_MOD (1 << 16) + +#define USBHS_EP1_BUF_MOD (1 << 1) +#define USBHS_EP1_ISO_BUF_MOD (1 << 17) + +#define USBHS_EP2_BUF_MOD (1 << 2) +#define USBHS_EP2_ISO_BUF_MOD (1 << 18) + +#define USBHS_EP3_BUF_MOD (1 << 3) +#define USBHS_EP3_ISO_BUF_MOD (1 << 19) + +#define USBHS_EP4_BUF_MOD (1 << 4) +#define USBHS_EP4_ISO_BUF_MOD (1 << 20) + +#define USBHS_EP5_BUF_MOD (1 << 5) +#define USBHS_EP5_ISO_BUF_MOD (1 << 21) + +#define USBHS_EP6_BUF_MOD (1 << 6) +#define USBHS_EP6_ISO_BUF_MOD (1 << 22) + +#define USBHS_EP7_BUF_MOD (1 << 7) +#define USBHS_EP7_ISO_BUF_MOD (1 << 23) + +#define USBHS_EP8_BUF_MOD (1 << 8) +#define USBHS_EP8_ISO_BUF_MOD (1 << 24) + +#define USBHS_EP9_BUF_MOD (1 << 9) +#define USBHS_EP9_ISO_BUF_MOD (1 << 25) + +#define USBHS_EP10_BUF_MOD (1 << 10) +#define USBHS_EP10_ISO_BUF_MOD (1 << 26) + +#define USBHS_EP11_BUF_MOD (1 << 11) +#define USBHS_EP11_ISO_BUF_MOD (1 << 27) + +#define USBHS_EP12_BUF_MOD (1 << 12) +#define USBHS_EP12_ISO_BUF_MOD (1 << 28) + +#define USBHS_EP13_BUF_MOD (1 << 13) +#define USBHS_EP13_ISO_BUF_MOD (1 << 29) + +#define USBHS_EP14_BUF_MOD (1 << 14) +#define USBHS_EP14_ISO_BUF_MOD (1 << 30) + +#define USBHS_EP15_BUF_MOD (1 << 15) +#define USBHS_EP15_ISO_BUF_MOD (1 << 31) +//USBHS_EPn_T_EN USBHS_EPn_R_EN USBHS_EPn_BUF_MOD Description: Arrange from low to high with UEPn_DMA as the starting address +// 0 0 x The endpoint is disabled and the UEPn_*_DMA buffers are not used. +// 1 0 0 The first address of the receive (OUT) buffer is UEPn_RX_DMA +// 1 0 1 RB_UEPn_RX_TOG[0]=0, use buffer UEPn_RX_DMA RB_UEPn_RX_TOG[0]=1, use buffer UEPn_TX_DMA +// 0 1 0 The first address of the transmit (IN) buffer is UEPn_TX_DMA. +// 0 1 1 RB_UEPn_TX_TOG[0]=0, use buffer UEPn_TX_DMA RB_UEPn_TX_TOG[0]=1, use buffer UEPn_RX_DMA + +/* USB0_DMA */ +#define USBHS_UEP0_DMA_OFFSET(n) (0x1C) // endpoint 0 DMA buffer address + +/* USBX_RX_DMA */ +#define USBHS_UEPx_RX_DMA_OFFSET(n) (0x1C + 4 * (n)) // endpoint x DMA buffer address + +#define USBHS_UEPx_TX_DMA_OFFSET(n) (0x58 + 4 * (n)) // endpoint x DMA buffer address + +#define USBHS_UEPx_MAX_LEN_OFFSET(n) (0x98 + 4 * (n)) // endpoint x DMA buffer address + +#define USBHS_UEPx_T_LEN_OFFSET(n) (0xD8 + 4 * (n)) // endpoint x DMA buffer address +#define USBHS_UEPx_TX_CTRL_OFFSET(n) (0xD8 + 4 * (n) + 2) // endpoint x DMA buffer address +#define USBHS_UEPx_RX_CTRL_OFFSET(n) (0xD8 + 4 * (n) + 3) // endpoint x DMA buffer address + +// UEPn_T_LEN +#define USBHS_EP_T_LEN_MASK (0x7FF) + +//UEPn_TX_CTRL +#define USBHS_EP_T_RES_MASK (3 << 0) +#define USBHS_EP_T_RES_ACK (0 << 0) +#define USBHS_EP_T_RES_NYET (1 << 0) +#define USBHS_EP_T_RES_NAK (2 << 0) +#define USBHS_EP_T_RES_STALL (3 << 0) + +#define USBHS_EP_T_TOG_MASK (3 << 3) +#define USBHS_EP_T_TOG_0 (0 << 3) +#define USBHS_EP_T_TOG_1 (1 << 3) +#define USBHS_EP_T_TOG_2 (2 << 3) +#define USBHS_EP_T_TOG_M (3 << 3) + +#define USBHS_EP_T_AUTOTOG (1 << 5) + +//UEPn_RX_CTRL +#define USBHS_EP_R_RES_MASK (3 << 0) +#define USBHS_EP_R_RES_ACK (0 << 0) +#define USBHS_EP_R_RES_NYET (1 << 0) +#define USBHS_EP_R_RES_NAK (2 << 0) +#define USBHS_EP_R_RES_STALL (3 << 0) + +#define USBHS_EP_R_TOG_MASK (3 << 3) +#define USBHS_EP_R_TOG_0 (0 << 3) +#define USBHS_EP_R_TOG_1 (1 << 3) +#define USBHS_EP_R_TOG_2 (2 << 3) +#define USBHS_EP_R_TOG_M (3 << 3) + +#define USBHS_EP_R_AUTOTOG (1 << 5) + +#define USBHS_TOG_MATCH (1 << 6) + +/******************* HOST ******************/ +// USB HOST_CTRL +#define USBHS_SEND_BUS_RESET (1 << 0) +#define USBHS_SEND_BUS_SUSPEND (1 << 1) +#define USBHS_SEND_BUS_RESUME (1 << 2) +#define USBHS_REMOTE_WAKE (1 << 3) +#define USBHS_PHY_SUSPENDM (1 << 4) +#define USBHS_UH_SOFT_FREE (1 << 6) +#define USBHS_SEND_SOF_EN (1 << 7) + +//UH_CONFIG +#define USBHS_HOST_TX_EN (1 << 3) +#define USBHS_HOST_RX_EN (1 << 18) + +// HOST_EP_TYPE +#define USBHS_ENDP_TX_ISO (1 << 3) +#define USBHS_ENDP_RX_ISO (1 << (16 + 2)) + +// R32_UH_EP_PID +#define USBHS_HOST_MASK_TOKEN (0x0f) +#define USBHS_HOST_MASK_ENDP (0x0f << 4) + +//R8_UH_RX_CTRL +#define USBHS_EP_R_RES_MASK (3 << 0) +#define USBHS_EP_R_RES_ACK (0 << 0) +#define USBHS_EP_R_RES_NYET (1 << 0) +#define USBHS_EP_R_RES_NAK (2 << 0) +#define USBHS_EP_R_RES_STALL (3 << 0) + +#define USBHS_UH_R_RES_NO (1 << 2) +#define USBHS_UH_R_TOG_1 (1 << 3) +#define USBHS_UH_R_TOG_2 (2 << 3) +#define USBHS_UH_R_TOG_3 (3 << 3) +#define USBHS_UH_R_TOG_AUTO (1 << 5) +#define USBHS_UH_R_DATA_NO (1 << 6) +//R8_UH_TX_CTRL +#define USBHS_UH_T_RES_MASK (3 << 0) +#define USBHS_UH_T_RES_ACK (0 << 0) +#define USBHS_UH_T_RES_NYET (1 << 0) +#define USBHS_UH_T_RES_NAK (2 << 0) +#define USBHS_UH_T_RES_STALL (3 << 0) + +#define USBHS_UH_T_RES_NO (1 << 2) +#define USBHS_UH_T_TOG_1 (1 << 3) +#define USBHS_UH_T_TOG_2 (2 << 3) +#define USBHS_UH_T_TOG_3 (3 << 3) +#define USBHS_UH_T_TOG_AUTO (1 << 5) +#define USBHS_UH_T_DATA_NO (1 << 6) + +// 00: OUT, 01:SOF, 10:IN, 11:SETUP +#define PID_OUT 0 +#define PID_SOF 1 +#define PID_IN 2 +#define PID_SETUP 3 + +#endif diff --git a/src/portable/wch/ch32v307/ch32_usbhs_reg.h b/src/portable/wch/ch32v307/ch32_usbhs_reg.h deleted file mode 100644 index 5a2c1fbc9..000000000 --- a/src/portable/wch/ch32v307/ch32_usbhs_reg.h +++ /dev/null @@ -1,345 +0,0 @@ -#ifndef _USB_CH32_USBHS_REG_H -#define _USB_CH32_USBHS_REG_H - -#include - -/******************* GLOBAL ******************/ - -// USB CONTROL -#define USBHS_CONTROL_OFFSET 0x00 -#define USBHS_DMA_EN (1 << 0) -#define USBHS_ALL_CLR (1 << 1) -#define USBHS_FORCE_RST (1 << 2) -#define USBHS_INT_BUSY_EN (1 << 3) -#define USBHS_DEV_PU_EN (1 << 4) -#define USBHS_SPEED_MASK (3 << 5) -#define USBHS_FULL_SPEED (0 << 5) -#define USBHS_HIGH_SPEED (1 << 5) -#define USBHS_LOW_SPEED (2 << 5) -#define USBHS_HOST_MODE (1 << 7) - -// USB_INT_EN -#define USBHS_INT_EN_OFFSET 0x02 -#define USBHS_BUS_RST_EN (1 << 0) -#define USBHS_DETECT_EN (1 << 0) -#define USBHS_TRANSFER_EN (1 << 1) -#define USBHS_SUSPEND_EN (1 << 2) -#define USBHS_SOF_ACT_EN (1 << 3) -#define USBHS_FIFO_OV_EN (1 << 4) -#define USBHS_SETUP_ACT_EN (1 << 5) -#define USBHS_ISO_ACT_EN (1 << 6) -#define USBHS_DEV_NAK_EN (1 << 7) - -// USB DEV AD -#define USBHS_DEV_AD_OFFSET 0x03 -// USB FRAME_NO -#define USBHS_FRAME_NO_OFFSET 0x04 -// USB SUSPEND -#define USBHS_SUSPEND_OFFSET 0x06 -#define USBHS_DEV_REMOTE_WAKEUP (1 << 2) -#define USBHS_LINESTATE_MASK (2 << 4) /* Read Only */ - -// RESERVED0 - -// USB SPEED TYPE -#define USBHS_SPEED_TYPE_OFFSET 0x08 -#define USBSPEED_MASK (0x03) - -// USB_MIS_ST -#define USBHS_MIS_ST_OFFSET 0x09 -#define USBHS_SPLIT_CAN (1 << 0) -#define USBHS_ATTACH (1 << 1) -#define USBHS_SUSPEND (1 << 2) -#define USBHS_BUS_RESET (1 << 3) -#define USBHS_R_FIFO_RDY (1 << 4) -#define USBHS_SIE_FREE (1 << 5) -#define USBHS_SOF_ACT (1 << 6) -#define USBHS_SOF_PRES (1 << 7) - -// INT_FLAG -#define USBHS_INT_FLAG_OFFSET 0x0A -#define USBHS_BUS_RST_FLAG (1 << 0) -#define USBHS_DETECT_FLAG (1 << 0) -#define USBHS_TRANSFER_FLAG (1 << 1) -#define USBHS_SUSPEND_FLAG (1 << 2) -#define USBHS_HST_SOF_FLAG (1 << 3) -#define USBHS_FIFO_OV_FLAG (1 << 4) -#define USBHS_SETUP_FLAG (1 << 5) -#define USBHS_ISO_ACT_FLAG (1 << 6) - -// INT_ST -#define USBHS_INT_ST_OFFSET 0x0B -#define USBHS_DEV_UIS_IS_NAK (1 << 7) -#define USBHS_DEV_UIS_TOG_OK (1 << 6) -#define MASK_UIS_TOKEN (3 << 4) -#define MASK_UIS_ENDP (0x0F) -#define MASK_UIS_H_RES (0x0F) - -#define USBHS_TOGGLE_OK (0x40) -#define USBHS_HOST_RES (0x0f) - -//USB_RX_LEN -#define USBHS_RX_LEN_OFFSET 0x0C -/******************* DEVICE ******************/ - -//UEP_CONFIG -#define USBHS_UEP_CONFIG_OFFSET 0x10 -#define USBHS_EP0_T_EN (1 << 0) -#define USBHS_EP0_R_EN (1 << 16) - -#define USBHS_EP1_T_EN (1 << 1) -#define USBHS_EP1_R_EN (1 << 17) - -#define USBHS_EP2_T_EN (1 << 2) -#define USBHS_EP2_R_EN (1 << 18) - -#define USBHS_EP3_T_EN (1 << 3) -#define USBHS_EP3_R_EN (1 << 19) - -#define USBHS_EP4_T_EN (1 << 4) -#define USBHS_EP4_R_EN (1 << 20) - -#define USBHS_EP5_T_EN (1 << 5) -#define USBHS_EP5_R_EN (1 << 21) - -#define USBHS_EP6_T_EN (1 << 6) -#define USBHS_EP6_R_EN (1 << 22) - -#define USBHS_EP7_T_EN (1 << 7) -#define USBHS_EP7_R_EN (1 << 23) - -#define USBHS_EP8_T_EN (1 << 8) -#define USBHS_EP8_R_EN (1 << 24) - -#define USBHS_EP9_T_EN (1 << 9) -#define USBHS_EP9_R_EN (1 << 25) - -#define USBHS_EP10_T_EN (1 << 10) -#define USBHS_EP10_R_EN (1 << 26) - -#define USBHS_EP11_T_EN (1 << 11) -#define USBHS_EP11_R_EN (1 << 27) - -#define USBHS_EP12_T_EN (1 << 12) -#define USBHS_EP12_R_EN (1 << 28) - -#define USBHS_EP13_T_EN (1 << 13) -#define USBHS_EP13_R_EN (1 << 29) - -#define USBHS_EP14_T_EN (1 << 14) -#define USBHS_EP14_R_EN (1 << 30) - -#define USBHS_EP15_T_EN (1 << 15) -#define USBHS_EP15_R_EN (1 << 31) - -//UEP_TYPE -#define USBHS_UEP_TYPE_OFFSET 0x14 -#define USBHS_EP0_T_TYP (1 << 0) -#define USBHS_EP0_R_TYP (1 << 16) - -#define USBHS_EP1_T_TYP (1 << 1) -#define USBHS_EP1_R_TYP (1 << 17) - -#define USBHS_EP2_T_TYP (1 << 2) -#define USBHS_EP2_R_TYP (1 << 18) - -#define USBHS_EP3_T_TYP (1 << 3) -#define USBHS_EP3_R_TYP (1 << 19) - -#define USBHS_EP4_T_TYP (1 << 4) -#define USBHS_EP4_R_TYP (1 << 20) - -#define USBHS_EP5_T_TYP (1 << 5) -#define USBHS_EP5_R_TYP (1 << 21) - -#define USBHS_EP6_T_TYP (1 << 6) -#define USBHS_EP6_R_TYP (1 << 22) - -#define USBHS_EP7_T_TYP (1 << 7) -#define USBHS_EP7_R_TYP (1 << 23) - -#define USBHS_EP8_T_TYP (1 << 8) -#define USBHS_EP8_R_TYP (1 << 24) - -#define USBHS_EP9_T_TYP (1 << 8) -#define USBHS_EP9_R_TYP (1 << 25) - -#define USBHS_EP10_T_TYP (1 << 10) -#define USBHS_EP10_R_TYP (1 << 26) - -#define USBHS_EP11_T_TYP (1 << 11) -#define USBHS_EP11_R_TYP (1 << 27) - -#define USBHS_EP12_T_TYP (1 << 12) -#define USBHS_EP12_R_TYP (1 << 28) - -#define USBHS_EP13_T_TYP (1 << 13) -#define USBHS_EP13_R_TYP (1 << 29) - -#define USBHS_EP14_T_TYP (1 << 14) -#define USBHS_EP14_R_TYP (1 << 30) - -#define USBHS_EP15_T_TYP (1 << 15) -#define USBHS_EP15_R_TYP (1 << 31) - -/* BUF_MOD UEP1~15 */ -#define USBHS_BUF_MOD_OFFSET 0x18 -#define USBHS_EP0_BUF_MOD (1 << 0) -#define USBHS_EP0_ISO_BUF_MOD (1 << 16) - -#define USBHS_EP1_BUF_MOD (1 << 1) -#define USBHS_EP1_ISO_BUF_MOD (1 << 17) - -#define USBHS_EP2_BUF_MOD (1 << 2) -#define USBHS_EP2_ISO_BUF_MOD (1 << 18) - -#define USBHS_EP3_BUF_MOD (1 << 3) -#define USBHS_EP3_ISO_BUF_MOD (1 << 19) - -#define USBHS_EP4_BUF_MOD (1 << 4) -#define USBHS_EP4_ISO_BUF_MOD (1 << 20) - -#define USBHS_EP5_BUF_MOD (1 << 5) -#define USBHS_EP5_ISO_BUF_MOD (1 << 21) - -#define USBHS_EP6_BUF_MOD (1 << 6) -#define USBHS_EP6_ISO_BUF_MOD (1 << 22) - -#define USBHS_EP7_BUF_MOD (1 << 7) -#define USBHS_EP7_ISO_BUF_MOD (1 << 23) - -#define USBHS_EP8_BUF_MOD (1 << 8) -#define USBHS_EP8_ISO_BUF_MOD (1 << 24) - -#define USBHS_EP9_BUF_MOD (1 << 9) -#define USBHS_EP9_ISO_BUF_MOD (1 << 25) - -#define USBHS_EP10_BUF_MOD (1 << 10) -#define USBHS_EP10_ISO_BUF_MOD (1 << 26) - -#define USBHS_EP11_BUF_MOD (1 << 11) -#define USBHS_EP11_ISO_BUF_MOD (1 << 27) - -#define USBHS_EP12_BUF_MOD (1 << 12) -#define USBHS_EP12_ISO_BUF_MOD (1 << 28) - -#define USBHS_EP13_BUF_MOD (1 << 13) -#define USBHS_EP13_ISO_BUF_MOD (1 << 29) - -#define USBHS_EP14_BUF_MOD (1 << 14) -#define USBHS_EP14_ISO_BUF_MOD (1 << 30) - -#define USBHS_EP15_BUF_MOD (1 << 15) -#define USBHS_EP15_ISO_BUF_MOD (1 << 31) -//USBHS_EPn_T_EN USBHS_EPn_R_EN USBHS_EPn_BUF_MOD Description: Arrange from low to high with UEPn_DMA as the starting address -// 0 0 x The endpoint is disabled and the UEPn_*_DMA buffers are not used. -// 1 0 0 The first address of the receive (OUT) buffer is UEPn_RX_DMA -// 1 0 1 RB_UEPn_RX_TOG[0]=0, use buffer UEPn_RX_DMA RB_UEPn_RX_TOG[0]=1, use buffer UEPn_TX_DMA -// 0 1 0 The first address of the transmit (IN) buffer is UEPn_TX_DMA. -// 0 1 1 RB_UEPn_TX_TOG[0]=0, use buffer UEPn_TX_DMA RB_UEPn_TX_TOG[0]=1, use buffer UEPn_RX_DMA - -/* USB0_DMA */ -#define USBHS_UEP0_DMA_OFFSET(n) (0x1C) // endpoint 0 DMA buffer address - -/* USBX_RX_DMA */ -#define USBHS_UEPx_RX_DMA_OFFSET(n) (0x1C + 4 * (n)) // endpoint x DMA buffer address - -#define USBHS_UEPx_TX_DMA_OFFSET(n) (0x58 + 4 * (n)) // endpoint x DMA buffer address - -#define USBHS_UEPx_MAX_LEN_OFFSET(n) (0x98 + 4 * (n)) // endpoint x DMA buffer address - -#define USBHS_UEPx_T_LEN_OFFSET(n) (0xD8 + 4 * (n)) // endpoint x DMA buffer address -#define USBHS_UEPx_TX_CTRL_OFFSET(n) (0xD8 + 4 * (n) + 2) // endpoint x DMA buffer address -#define USBHS_UEPx_RX_CTRL_OFFSET(n) (0xD8 + 4 * (n) + 3) // endpoint x DMA buffer address - -// UEPn_T_LEN -#define USBHS_EP_T_LEN_MASK (0x7FF) - -//UEPn_TX_CTRL -#define USBHS_EP_T_RES_MASK (3 << 0) -#define USBHS_EP_T_RES_ACK (0 << 0) -#define USBHS_EP_T_RES_NYET (1 << 0) -#define USBHS_EP_T_RES_NAK (2 << 0) -#define USBHS_EP_T_RES_STALL (3 << 0) - -#define USBHS_EP_T_TOG_MASK (3 << 3) -#define USBHS_EP_T_TOG_0 (0 << 3) -#define USBHS_EP_T_TOG_1 (1 << 3) -#define USBHS_EP_T_TOG_2 (2 << 3) -#define USBHS_EP_T_TOG_M (3 << 3) - -#define USBHS_EP_T_AUTOTOG (1 << 5) - -//UEPn_RX_CTRL -#define USBHS_EP_R_RES_MASK (3 << 0) -#define USBHS_EP_R_RES_ACK (0 << 0) -#define USBHS_EP_R_RES_NYET (1 << 0) -#define USBHS_EP_R_RES_NAK (2 << 0) -#define USBHS_EP_R_RES_STALL (3 << 0) - -#define USBHS_EP_R_TOG_MASK (3 << 3) -#define USBHS_EP_R_TOG_0 (0 << 3) -#define USBHS_EP_R_TOG_1 (1 << 3) -#define USBHS_EP_R_TOG_2 (2 << 3) -#define USBHS_EP_R_TOG_M (3 << 3) - -#define USBHS_EP_R_AUTOTOG (1 << 5) - -#define USBHS_TOG_MATCH (1 << 6) - -/******************* HOST ******************/ -// USB HOST_CTRL -#define USBHS_SEND_BUS_RESET (1 << 0) -#define USBHS_SEND_BUS_SUSPEND (1 << 1) -#define USBHS_SEND_BUS_RESUME (1 << 2) -#define USBHS_REMOTE_WAKE (1 << 3) -#define USBHS_PHY_SUSPENDM (1 << 4) -#define USBHS_UH_SOFT_FREE (1 << 6) -#define USBHS_SEND_SOF_EN (1 << 7) - -//UH_CONFIG -#define USBHS_HOST_TX_EN (1 << 3) -#define USBHS_HOST_RX_EN (1 << 18) - -// HOST_EP_TYPE -#define USBHS_ENDP_TX_ISO (1 << 3) -#define USBHS_ENDP_RX_ISO (1 << (16 + 2)) - -// R32_UH_EP_PID -#define USBHS_HOST_MASK_TOKEN (0x0f) -#define USBHS_HOST_MASK_ENDP (0x0f << 4) - -//R8_UH_RX_CTRL -#define USBHS_EP_R_RES_MASK (3 << 0) -#define USBHS_EP_R_RES_ACK (0 << 0) -#define USBHS_EP_R_RES_NYET (1 << 0) -#define USBHS_EP_R_RES_NAK (2 << 0) -#define USBHS_EP_R_RES_STALL (3 << 0) - -#define USBHS_UH_R_RES_NO (1 << 2) -#define USBHS_UH_R_TOG_1 (1 << 3) -#define USBHS_UH_R_TOG_2 (2 << 3) -#define USBHS_UH_R_TOG_3 (3 << 3) -#define USBHS_UH_R_TOG_AUTO (1 << 5) -#define USBHS_UH_R_DATA_NO (1 << 6) -//R8_UH_TX_CTRL -#define USBHS_UH_T_RES_MASK (3 << 0) -#define USBHS_UH_T_RES_ACK (0 << 0) -#define USBHS_UH_T_RES_NYET (1 << 0) -#define USBHS_UH_T_RES_NAK (2 << 0) -#define USBHS_UH_T_RES_STALL (3 << 0) - -#define USBHS_UH_T_RES_NO (1 << 2) -#define USBHS_UH_T_TOG_1 (1 << 3) -#define USBHS_UH_T_TOG_2 (2 << 3) -#define USBHS_UH_T_TOG_3 (3 << 3) -#define USBHS_UH_T_TOG_AUTO (1 << 5) -#define USBHS_UH_T_DATA_NO (1 << 6) - -// 00: OUT, 01:SOF, 10:IN, 11:SETUP -#define PID_OUT 0 -#define PID_SOF 1 -#define PID_IN 2 -#define PID_SETUP 3 - -#endif diff --git a/src/portable/wch/ch32v307/dcd_usbhs.c b/src/portable/wch/ch32v307/dcd_usbhs.c deleted file mode 100644 index 3ad011cff..000000000 --- a/src/portable/wch/ch32v307/dcd_usbhs.c +++ /dev/null @@ -1,391 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2022 Greg Davill - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V307) -#include "device/dcd.h" - -#include "ch32_usbhs_reg.h" -#include "core_riscv.h" - -// Max number of bi-directional endpoints including EP0 -#define EP_MAX 16 - -typedef struct { - uint8_t *buffer; - // tu_fifo_t * ff; // TODO support dcd_edpt_xfer_fifo API - uint16_t total_len; - uint16_t queued_len; - uint16_t max_size; - bool short_packet; -} xfer_ctl_t; - -#define XFER_CTL_BASE(_ep, _dir) &xfer_status[_ep][_dir] -static xfer_ctl_t xfer_status[EP_MAX][2]; - -#define EP_TX_LEN(ep) *(volatile uint16_t *)((volatile uint16_t *)&(USBHSD->UEP0_TX_LEN) + (ep)*2) -#define EP_TX_CTRL(ep) *(volatile uint8_t *)((volatile uint8_t *)&(USBHSD->UEP0_TX_CTRL) + (ep)*4) -#define EP_RX_CTRL(ep) *(volatile uint8_t *)((volatile uint8_t *)&(USBHSD->UEP0_RX_CTRL) + (ep)*4) -#define EP_RX_MAX_LEN(ep) *(volatile uint16_t *)((volatile uint16_t *)&(USBHSD->UEP0_MAX_LEN) + (ep)*2) - -#define EP_TX_DMA_ADDR(ep) *(volatile uint32_t *)((volatile uint32_t *)&(USBHSD->UEP1_TX_DMA) + (ep - 1)) -#define EP_RX_DMA_ADDR(ep) *(volatile uint32_t *)((volatile uint32_t *)&(USBHSD->UEP1_RX_DMA) + (ep - 1)) - -/* Endpoint Buffer */ -TU_ATTR_ALIGNED(4) uint8_t EP0_DatabufHD[64]; // ep0(64) - -volatile uint8_t USBHS_Dev_Endp0_Tog = 0x01; - -void dcd_init(uint8_t rhport) { - (void)rhport; - - memset(&xfer_status, 0, sizeof(xfer_status)); - - USBHSD->HOST_CTRL = 0x00; - USBHSD->HOST_CTRL = USBHS_PHY_SUSPENDM; - - USBHSD->CONTROL = 0; - -#if TUD_OPT_HIGH_SPEED - USBHSD->CONTROL = USBHS_DMA_EN | USBHS_INT_BUSY_EN | USBHS_HIGH_SPEED; -#else - #error OPT_MODE_FULL_SPEED not currently supported on CH32V307 - USBHSD->CONTROL = USBHS_DMA_EN | USBHS_INT_BUSY_EN | USBHS_FULL_SPEED; -#endif - - USBHSD->INT_EN = 0; - USBHSD->INT_EN = USBHS_SETUP_ACT_EN | USBHS_TRANSFER_EN | USBHS_DETECT_EN | USBHS_SUSPEND_EN; - - /* ALL endpoint enable */ - USBHSD->ENDP_CONFIG = 0xffffffff; - - USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; - USBHSD->ENDP_TYPE = 0x00; - USBHSD->BUF_MODE = 0x00; - - USBHSD->UEP0_MAX_LEN = 64; - - USBHSD->UEP0_DMA = (uint32_t)EP0_DatabufHD; - - USBHSD->UEP0_TX_LEN = 0; - USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_NAK; - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK; - - for (int ep = 1; ep < EP_MAX; ep++) { - EP_TX_LEN(ep) = 0; - EP_TX_CTRL(ep) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK; - EP_RX_CTRL(ep) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; - - EP_RX_MAX_LEN(ep) = 512; - } - - USBHSD->DEV_AD = 0; - USBHSD->CONTROL |= USBHS_DEV_PU_EN; -} - -void dcd_int_enable(uint8_t rhport) { - (void)rhport; - - NVIC_EnableIRQ(USBHS_IRQn); -} - -void dcd_int_disable(uint8_t rhport) { - (void)rhport; - - NVIC_DisableIRQ(USBHS_IRQn); -} - -void dcd_edpt_close_all(uint8_t rhport) { - (void)rhport; -} - -void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { - (void)dev_addr; - - // Response with zlp status - dcd_edpt_xfer(rhport, 0x80, NULL, 0); -} - -void dcd_remote_wakeup(uint8_t rhport) -{ - (void) rhport; -} - -void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { - (void)rhport; - - if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && - request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && - request->bRequest == TUSB_REQ_SET_ADDRESS) { - USBHSD->DEV_AD = (uint8_t)request->wValue; - } - - EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK; - EP_RX_CTRL(0) = USBHS_EP_R_RES_ACK; -} - -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_edpt) { - (void)rhport; - - uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress); - uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); - - TU_ASSERT(epnum < EP_MAX); - - xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir); - xfer->max_size = tu_edpt_packet_size(desc_edpt); - - if (epnum != 0) { - if (tu_edpt_dir(desc_edpt->bEndpointAddress) == TUSB_DIR_OUT) { - EP_RX_CTRL(epnum) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_ACK; - } else { - EP_TX_LEN(epnum) = 0; - EP_TX_CTRL(epnum) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; - } - } - - return true; -} - -int usbd_ep_close(const uint8_t ep) { - (void)ep; - - return 0; -} -void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { - (void)rhport; - - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - if (epnum == 0) { - if (dir == TUSB_DIR_OUT) { - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_STALL; - } else { - USBHSD->UEP0_TX_LEN = 0; - USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_STALL; - } - } else { - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(epnum) = (EP_RX_CTRL(epnum) & ~USBHS_EP_R_RES_MASK) | USBHS_EP_R_RES_STALL; - - } else { - EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~USBHS_EP_T_RES_MASK) | USBHS_EP_T_RES_STALL; - } - } -} - -void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { - (void)rhport; - - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - if (epnum == 0) { - if (dir == TUSB_DIR_OUT) { - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK; - } else { - } - } else { - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(epnum) = (EP_RX_CTRL(epnum) & ~(USBHS_EP_R_RES_MASK | USBHS_EP_T_TOG_MASK)) | USBHS_EP_T_RES_ACK; - - } else { - EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~(USBHS_EP_T_RES_MASK | USBHS_EP_T_TOG_MASK)) | USBHS_EP_T_RES_NAK; - } - } -} - -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { - (void)rhport; - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir); - xfer->buffer = buffer; - // xfer->ff = NULL; // TODO support dcd_edpt_xfer_fifo API - xfer->total_len = total_bytes; - xfer->queued_len = 0; - xfer->short_packet = false; - - // uint16_t num_packets = (total_bytes / xfer->max_size); - uint16_t short_packet_size = total_bytes % (xfer->max_size + 1); - - // Zero-size packet is special case. - if (short_packet_size == 0 || (total_bytes == 0)) { - xfer->short_packet = true; - } - - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { - if (!total_bytes) { - xfer->short_packet = true; - if (epnum == 0) { - USBHSD->UEP0_TX_LEN = 0; - USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_ACK | (USBHS_Dev_Endp0_Tog ? USBHS_EP_T_TOG_1 : USBHS_EP_T_TOG_0); - USBHS_Dev_Endp0_Tog ^= 1; - } else { - EP_TX_LEN(epnum) = 0; - EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~(USBHS_EP_T_RES_MASK)) | USBHS_EP_T_RES_ACK; - } - } else { - if (epnum == 0) { - xfer->queued_len += short_packet_size; - memcpy(&EP0_DatabufHD[0], buffer, short_packet_size); - - USBHSD->UEP0_TX_LEN = short_packet_size; - USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_ACK | (USBHS_Dev_Endp0_Tog ? USBHS_EP_T_TOG_1 : USBHS_EP_T_TOG_0); - USBHS_Dev_Endp0_Tog ^= 1; - } else { - xfer->queued_len += short_packet_size; - - EP_TX_DMA_ADDR(epnum) = (uint32_t)buffer; - USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << epnum); - EP_TX_LEN(epnum) = short_packet_size; - EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~(USBHS_EP_T_RES_MASK)) | USBHS_EP_T_RES_ACK; - } - } - } else { /* TUSB_DIR_OUT */ - if (epnum == 0) { - uint32_t read_count = USBHSD->RX_LEN; - read_count = TU_MIN(read_count, total_bytes); - - if ((total_bytes == 8)) { - read_count = 8; - memcpy(buffer, &EP0_DatabufHD[0], 8); - } else { - memcpy(buffer, &EP0_DatabufHD[0], read_count); - } - } else { - EP_RX_DMA_ADDR(epnum) = (uint32_t)xfer->buffer; - USBHSD->ENDP_CONFIG |= (USBHS_EP0_R_EN << epnum); - } - - // usbd_ep_read(ep_addr, buffer, total_bytes, &ret_bytes); - } - return true; -} - - -static void receive_packet(xfer_ctl_t *xfer, uint16_t xfer_size) { - // xfer->queued_len = xfer->total_len - remaining; - - uint16_t remaining = xfer->total_len - xfer->queued_len; - uint16_t to_recv_size; - - if (remaining <= xfer->max_size) { - // Avoid buffer overflow. - to_recv_size = (xfer_size > remaining) ? remaining : xfer_size; - } else { - // Room for full packet, choose recv_size based on what the microcontroller - // claims. - to_recv_size = (xfer_size > xfer->max_size) ? xfer->max_size : xfer_size; - } - - if (to_recv_size) { - } - - xfer->queued_len += xfer_size; - - // Per USB spec, a short OUT packet (including length 0) is always - // indicative of the end of a transfer (at least for ctl, bulk, int). - xfer->short_packet = (xfer_size < xfer->max_size); -} - -void dcd_int_handler(uint8_t rhport) { - (void)rhport; - - uint32_t end_num, rx_token; - uint8_t intflag = 0; - - intflag = USBHSD->INT_FG; - - if (intflag & USBHS_TRANSFER_FLAG) { - - end_num = (USBHSD->INT_ST) & MASK_UIS_ENDP; - rx_token = (((USBHSD->INT_ST) & MASK_UIS_TOKEN) >> 4) & 0x03; - - uint8_t endp = end_num | (rx_token == PID_IN ? TUSB_DIR_IN_MASK : 0); - - xfer_ctl_t *xfer = XFER_CTL_BASE(end_num, tu_edpt_dir(endp)); - - if (rx_token == PID_OUT) { - uint16_t rx_len = USBHSD->RX_LEN; - - receive_packet(xfer, rx_len); - - if (xfer->short_packet || (xfer->queued_len == xfer->total_len)) { - xfer->short_packet = false; - - dcd_event_xfer_complete(0, endp, xfer->queued_len, XFER_RESULT_SUCCESS, true); - } - - if (end_num == 0) { - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; - } - - } else if (rx_token == PID_IN) { - if (xfer->short_packet || (xfer->queued_len == xfer->total_len)) { - xfer->short_packet = false; - xfer->total_len = 0; - dcd_event_xfer_complete(0, endp, xfer->queued_len, XFER_RESULT_SUCCESS, true); - - EP_TX_CTRL(end_num) = (EP_TX_CTRL(end_num) & ~(USBHS_EP_T_RES_MASK)) | USBHS_EP_T_RES_NAK; - - if (end_num == 0) { - } - } else { - dcd_edpt_xfer(0, endp, xfer->buffer + xfer->queued_len, xfer->total_len - xfer->queued_len); - } - } - - USBHSD->INT_FG = USBHS_TRANSFER_FLAG; /* Clear flag */ - } else if (intflag & USBHS_SETUP_FLAG) { - USBHS_Dev_Endp0_Tog = 1; - dcd_event_setup_received(0, EP0_DatabufHD, true); - - USBHSD->INT_FG = USBHS_SETUP_FLAG; /* Clear flag */ - } else if (intflag & USBHS_DETECT_FLAG) { - USBHS_Dev_Endp0_Tog = 1; - - xfer_status[0][TUSB_DIR_OUT].max_size = 64; - xfer_status[0][TUSB_DIR_IN].max_size = 64; - - dcd_event_bus_reset(0, TUSB_SPEED_HIGH, true); - - USBHSD->DEV_AD = 0; - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; - - USBHSD->INT_FG = USBHS_DETECT_FLAG; /* Clear flag */ - } else if (intflag & USBHS_SUSPEND_FLAG) { - dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SUSPEND }; - dcd_event_handler(&event, true); - - USBHSD->INT_FG = USBHS_SUSPEND_FLAG; /* Clear flag */ - } -} - -#endif diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c new file mode 100644 index 000000000..1f1c0b876 --- /dev/null +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -0,0 +1,391 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 Greg Davill + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUD_ENABLED && ((CFG_TUSB_MCU == OPT_MCU_CH32V307) || (CFG_TUSB_MCU == OPT_MCU_CH32F20X)) +#include "device/dcd.h" + +#include "ch32_usbhs_reg.h" + + +// Max number of bi-directional endpoints including EP0 +#define EP_MAX 16 + +typedef struct { + uint8_t *buffer; + // tu_fifo_t * ff; // TODO support dcd_edpt_xfer_fifo API + uint16_t total_len; + uint16_t queued_len; + uint16_t max_size; + bool short_packet; +} xfer_ctl_t; + +#define XFER_CTL_BASE(_ep, _dir) &xfer_status[_ep][_dir] +static xfer_ctl_t xfer_status[EP_MAX][2]; + +#define EP_TX_LEN(ep) *(volatile uint16_t *)((volatile uint16_t *)&(USBHSD->UEP0_TX_LEN) + (ep)*2) +#define EP_TX_CTRL(ep) *(volatile uint8_t *)((volatile uint8_t *)&(USBHSD->UEP0_TX_CTRL) + (ep)*4) +#define EP_RX_CTRL(ep) *(volatile uint8_t *)((volatile uint8_t *)&(USBHSD->UEP0_RX_CTRL) + (ep)*4) +#define EP_RX_MAX_LEN(ep) *(volatile uint16_t *)((volatile uint16_t *)&(USBHSD->UEP0_MAX_LEN) + (ep)*2) + +#define EP_TX_DMA_ADDR(ep) *(volatile uint32_t *)((volatile uint32_t *)&(USBHSD->UEP1_TX_DMA) + (ep - 1)) +#define EP_RX_DMA_ADDR(ep) *(volatile uint32_t *)((volatile uint32_t *)&(USBHSD->UEP1_RX_DMA) + (ep - 1)) + +/* Endpoint Buffer */ +TU_ATTR_ALIGNED(4) uint8_t EP0_DatabufHD[64]; // ep0(64) + +volatile uint8_t USBHS_Dev_Endp0_Tog = 0x01; + +void dcd_init(uint8_t rhport) { + (void)rhport; + + memset(&xfer_status, 0, sizeof(xfer_status)); + + USBHSD->HOST_CTRL = 0x00; + USBHSD->HOST_CTRL = USBHS_PHY_SUSPENDM; + + USBHSD->CONTROL = 0; + +#if TUD_OPT_HIGH_SPEED + USBHSD->CONTROL = USBHS_DMA_EN | USBHS_INT_BUSY_EN | USBHS_HIGH_SPEED; +#else + #error OPT_MODE_FULL_SPEED not currently supported on CH32 + USBHSD->CONTROL = USBHS_DMA_EN | USBHS_INT_BUSY_EN | USBHS_FULL_SPEED; +#endif + + USBHSD->INT_EN = 0; + USBHSD->INT_EN = USBHS_SETUP_ACT_EN | USBHS_TRANSFER_EN | USBHS_DETECT_EN | USBHS_SUSPEND_EN; + + /* ALL endpoint enable */ + USBHSD->ENDP_CONFIG = 0xffffffff; + + USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; + USBHSD->ENDP_TYPE = 0x00; + USBHSD->BUF_MODE = 0x00; + + USBHSD->UEP0_MAX_LEN = 64; + + USBHSD->UEP0_DMA = (uint32_t)EP0_DatabufHD; + + USBHSD->UEP0_TX_LEN = 0; + USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_NAK; + USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK; + + for (int ep = 1; ep < EP_MAX; ep++) { + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK; + EP_RX_CTRL(ep) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; + + EP_RX_MAX_LEN(ep) = 512; + } + + USBHSD->DEV_AD = 0; + USBHSD->CONTROL |= USBHS_DEV_PU_EN; +} + +void dcd_int_enable(uint8_t rhport) { + (void)rhport; + + NVIC_EnableIRQ(USBHS_IRQn); +} + +void dcd_int_disable(uint8_t rhport) { + (void)rhport; + + NVIC_DisableIRQ(USBHS_IRQn); +} + +void dcd_edpt_close_all(uint8_t rhport) { + (void)rhport; +} + +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { + (void)dev_addr; + + // Response with zlp status + dcd_edpt_xfer(rhport, 0x80, NULL, 0); +} + +void dcd_remote_wakeup(uint8_t rhport) +{ + (void) rhport; +} + +void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { + (void)rhport; + + if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && + request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && + request->bRequest == TUSB_REQ_SET_ADDRESS) { + USBHSD->DEV_AD = (uint8_t)request->wValue; + } + + EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK; + EP_RX_CTRL(0) = USBHS_EP_R_RES_ACK; +} + +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_edpt) { + (void)rhport; + + uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); + + TU_ASSERT(epnum < EP_MAX); + + xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir); + xfer->max_size = tu_edpt_packet_size(desc_edpt); + + if (epnum != 0) { + if (tu_edpt_dir(desc_edpt->bEndpointAddress) == TUSB_DIR_OUT) { + EP_RX_CTRL(epnum) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_ACK; + } else { + EP_TX_LEN(epnum) = 0; + EP_TX_CTRL(epnum) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; + } + } + + return true; +} + +int usbd_ep_close(const uint8_t ep) { + (void)ep; + + return 0; +} +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { + (void)rhport; + + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + if (epnum == 0) { + if (dir == TUSB_DIR_OUT) { + USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_STALL; + } else { + USBHSD->UEP0_TX_LEN = 0; + USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_STALL; + } + } else { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(epnum) = (EP_RX_CTRL(epnum) & ~USBHS_EP_R_RES_MASK) | USBHS_EP_R_RES_STALL; + + } else { + EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~USBHS_EP_T_RES_MASK) | USBHS_EP_T_RES_STALL; + } + } +} + +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { + (void)rhport; + + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + if (epnum == 0) { + if (dir == TUSB_DIR_OUT) { + USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK; + } else { + } + } else { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(epnum) = (EP_RX_CTRL(epnum) & ~(USBHS_EP_R_RES_MASK | USBHS_EP_T_TOG_MASK)) | USBHS_EP_T_RES_ACK; + + } else { + EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~(USBHS_EP_T_RES_MASK | USBHS_EP_T_TOG_MASK)) | USBHS_EP_T_RES_NAK; + } + } +} + +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { + (void)rhport; + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir); + xfer->buffer = buffer; + // xfer->ff = NULL; // TODO support dcd_edpt_xfer_fifo API + xfer->total_len = total_bytes; + xfer->queued_len = 0; + xfer->short_packet = false; + + // uint16_t num_packets = (total_bytes / xfer->max_size); + uint16_t short_packet_size = total_bytes % (xfer->max_size + 1); + + // Zero-size packet is special case. + if (short_packet_size == 0 || (total_bytes == 0)) { + xfer->short_packet = true; + } + + if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { + if (!total_bytes) { + xfer->short_packet = true; + if (epnum == 0) { + USBHSD->UEP0_TX_LEN = 0; + USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_ACK | (USBHS_Dev_Endp0_Tog ? USBHS_EP_T_TOG_1 : USBHS_EP_T_TOG_0); + USBHS_Dev_Endp0_Tog ^= 1; + } else { + EP_TX_LEN(epnum) = 0; + EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~(USBHS_EP_T_RES_MASK)) | USBHS_EP_T_RES_ACK; + } + } else { + if (epnum == 0) { + xfer->queued_len += short_packet_size; + memcpy(&EP0_DatabufHD[0], buffer, short_packet_size); + + USBHSD->UEP0_TX_LEN = short_packet_size; + USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_ACK | (USBHS_Dev_Endp0_Tog ? USBHS_EP_T_TOG_1 : USBHS_EP_T_TOG_0); + USBHS_Dev_Endp0_Tog ^= 1; + } else { + xfer->queued_len += short_packet_size; + + EP_TX_DMA_ADDR(epnum) = (uint32_t)buffer; + USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << epnum); + EP_TX_LEN(epnum) = short_packet_size; + EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~(USBHS_EP_T_RES_MASK)) | USBHS_EP_T_RES_ACK; + } + } + } else { /* TUSB_DIR_OUT */ + if (epnum == 0) { + uint32_t read_count = USBHSD->RX_LEN; + read_count = TU_MIN(read_count, total_bytes); + + if ((total_bytes == 8)) { + read_count = 8; + memcpy(buffer, &EP0_DatabufHD[0], 8); + } else { + memcpy(buffer, &EP0_DatabufHD[0], read_count); + } + } else { + EP_RX_DMA_ADDR(epnum) = (uint32_t)xfer->buffer; + USBHSD->ENDP_CONFIG |= (USBHS_EP0_R_EN << epnum); + } + + // usbd_ep_read(ep_addr, buffer, total_bytes, &ret_bytes); + } + return true; +} + + +static void receive_packet(xfer_ctl_t *xfer, uint16_t xfer_size) { + // xfer->queued_len = xfer->total_len - remaining; + + uint16_t remaining = xfer->total_len - xfer->queued_len; + uint16_t to_recv_size; + + if (remaining <= xfer->max_size) { + // Avoid buffer overflow. + to_recv_size = (xfer_size > remaining) ? remaining : xfer_size; + } else { + // Room for full packet, choose recv_size based on what the microcontroller + // claims. + to_recv_size = (xfer_size > xfer->max_size) ? xfer->max_size : xfer_size; + } + + if (to_recv_size) { + } + + xfer->queued_len += xfer_size; + + // Per USB spec, a short OUT packet (including length 0) is always + // indicative of the end of a transfer (at least for ctl, bulk, int). + xfer->short_packet = (xfer_size < xfer->max_size); +} + +void dcd_int_handler(uint8_t rhport) { + (void)rhport; + + uint32_t end_num, rx_token; + uint8_t intflag = 0; + + intflag = USBHSD->INT_FG; + + if (intflag & USBHS_TRANSFER_FLAG) { + + end_num = (USBHSD->INT_ST) & MASK_UIS_ENDP; + rx_token = (((USBHSD->INT_ST) & MASK_UIS_TOKEN) >> 4) & 0x03; + + uint8_t endp = end_num | (rx_token == PID_IN ? TUSB_DIR_IN_MASK : 0); + + xfer_ctl_t *xfer = XFER_CTL_BASE(end_num, tu_edpt_dir(endp)); + + if (rx_token == PID_OUT) { + uint16_t rx_len = USBHSD->RX_LEN; + + receive_packet(xfer, rx_len); + + if (xfer->short_packet || (xfer->queued_len == xfer->total_len)) { + xfer->short_packet = false; + + dcd_event_xfer_complete(0, endp, xfer->queued_len, XFER_RESULT_SUCCESS, true); + } + + if (end_num == 0) { + USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; + } + + } else if (rx_token == PID_IN) { + if (xfer->short_packet || (xfer->queued_len == xfer->total_len)) { + xfer->short_packet = false; + xfer->total_len = 0; + dcd_event_xfer_complete(0, endp, xfer->queued_len, XFER_RESULT_SUCCESS, true); + + EP_TX_CTRL(end_num) = (EP_TX_CTRL(end_num) & ~(USBHS_EP_T_RES_MASK)) | USBHS_EP_T_RES_NAK; + + if (end_num == 0) { + } + } else { + dcd_edpt_xfer(0, endp, xfer->buffer + xfer->queued_len, xfer->total_len - xfer->queued_len); + } + } + + USBHSD->INT_FG = USBHS_TRANSFER_FLAG; /* Clear flag */ + } else if (intflag & USBHS_SETUP_FLAG) { + USBHS_Dev_Endp0_Tog = 1; + dcd_event_setup_received(0, EP0_DatabufHD, true); + + USBHSD->INT_FG = USBHS_SETUP_FLAG; /* Clear flag */ + } else if (intflag & USBHS_DETECT_FLAG) { + USBHS_Dev_Endp0_Tog = 1; + + xfer_status[0][TUSB_DIR_OUT].max_size = 64; + xfer_status[0][TUSB_DIR_IN].max_size = 64; + + dcd_event_bus_reset(0, TUSB_SPEED_HIGH, true); + + USBHSD->DEV_AD = 0; + USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; + + USBHSD->INT_FG = USBHS_DETECT_FLAG; /* Clear flag */ + } else if (intflag & USBHS_SUSPEND_FLAG) { + dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SUSPEND }; + dcd_event_handler(&event, true); + + USBHSD->INT_FG = USBHS_SUSPEND_FLAG; /* Clear flag */ + } +} + +#endif diff --git a/src/tusb_option.h b/src/tusb_option.h index a41f5a07e..f4b1a1dd4 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -169,6 +169,7 @@ // WCH #define OPT_MCU_CH32V307 2200 ///< WCH CH32V307 +#define OPT_MCU_CH32F20X 2210 ///< WCH CH32F20x // NXP LPC MCX diff --git a/tools/get_deps.py b/tools/get_deps.py index 1fac291a3..af3043e4e 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -164,6 +164,9 @@ deps_optional = { 'hw/mcu/wch/ch32v307': ['https://github.com/openwch/ch32v307.git', '17761f5cf9dbbf2dcf665b7c04934188add20082', 'ch32v307'], + 'hw/mcu/wch/ch32f20x': ['https://github.com/openwch/ch32f20x.git', + '77c4095087e5ed2c548ec9058e655d0b8757663b', + 'ch32f20x'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '20285262657d1b482d132d20d755c8c330d55c1f', 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x' diff --git a/tools/iar_template.ipcf b/tools/iar_template.ipcf index 4919fe7b4..c3683c3d7 100644 --- a/tools/iar_template.ipcf +++ b/tools/iar_template.ipcf @@ -164,8 +164,8 @@ $TUSB_DIR$/src/portable/valentyusb/eptri/dcd_eptri.c - - $TUSB_DIR$/src/portable/wch/ch32v307/dcd_usbhs.c + + $TUSB_DIR$/src/portable/wch/dcd_ch32_usbhs.c $TUSB_DIR$/src/typec/usbc.c -- cgit v1.3.1 From 765ba4b9ac3f4670d80e81ec2a9d5a44c70939dc Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 31 Oct 2023 16:21:45 +0700 Subject: update doc to add supported mcus --- README.rst | 3 ++- docs/reference/supported.rst | 56 ++++++++++++++++++++++++++++++-------------- 2 files changed, 40 insertions(+), 19 deletions(-) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index aef310b98..08bc78654 100644 --- a/README.rst +++ b/README.rst @@ -34,6 +34,7 @@ The stack supports the following MCUs: - **Allwinner:** F1C100s/F1C200s - **Analog:** MAX3421e (aka Arduino usb host shield) +- **Bridgetek:** FT90x - **Broadcom:** BCM2837, BCM2711 - **Dialog:** DA1469x - **Espressif:** ESP32-S2, ESP32-S3 @@ -57,7 +58,7 @@ The stack supports the following MCUs: - **Silabs:** EFM32GG - **Sony:** CXD56 -- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G0, G4, L0, L1, L4, L4+, WB +- **ST:** STM32 series: F0, F1, F2, F3, F4, F7, H7, G0, G4, L0, L1, L4, L4+ U5, WB - **TI:** MSP430, MSP432E4, TM4C123 - **ValentyUSB:** eptri - **WCH:** CH32V307 diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index aed64782c..76b1d993e 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -8,6 +8,12 @@ Supported MCUs +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Manufacturer | Family | Device | Host | Highspeed | Driver | Note | +==============+=======================+========+======+===========+===================+==============+ +| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Brigetek | FT90x | ✔ | | ✔ | ft9xx | | ++--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | @@ -17,36 +23,46 @@ Supported MCUs | GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | Infineon | XMC4500 | ✔ | | ✖ | dwc2 | | ++--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ +| MicroChip | SAM | D11, D21 | ✔ | | ✖ | samd | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | D51, E5x | ✔ | | ✖ | samd | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | G55 | ✔ | | ✖ | samg | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | L21, L22 | ✔ | | ✖ | samd | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | | +| +-----+-----------------+--------+------+-----------+-------------------+--------------+ +| | PIC | 24 | ✔ | | | pic | ci_fs variant| +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant| +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | dsPIC33 | ✔ | | | pic | ci_fs variant| +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | 32mz | ✔ | | | pic32mz | musb variant | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| MicroChip | SAM D11, D21 | ✔ | | ✖ | samd | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | SAM D51, E5x | ✔ | | ✖ | samd | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | SAM G55 | ✔ | | ✖ | samg | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | SAM L21, L22 | ✔ | | ✖ | samd | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | SAM E70,S70,V70,V71 | ✔ | | ✔ | samx7x | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ +| Mind Montion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant| ++--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | NordicSemi | nRF52833, nRF52840 | ✔ | ✖ | ✖ | nrf5x | | | +-----------------------+--------+------+-----------+-------------------+--------------+ | | nRF5340 | ✔ | ✖ | ✖ | nrf5x | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Nuvoton | NUC120 | ✔ | ✖ | ✖ | | | +| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | NUC121/NUC125 | ✔ | ✖ | ✖ | | | +| | NUC121/NUC125 | ✔ | ✖ | ✖ | nuc121 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | NUC126 | ✔ | ✖ | ✖ | | | +| | NUC126 | ✔ | ✖ | ✖ | nuc121 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | NUC505 | ✔ | | ✔ | | | +| | NUC505 | ✔ | | ✔ | nuc505 | | +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | NXP | iMXRT | RT10xx | ✔ | ✔ | ✔ | ci_hs | | | | +-------------+--------+------+-----------+-------------------+--------------+ | | | RT11xx | ✔ | ✔ | ✔ | ci_hs | | | +---------+-------------+--------+------+-----------+-------------------+--------------+ -| | Kinetis | KL25 | ✔ | ⚠ | ✖ | | | +| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | | | +-------------+--------+------+-----------+-------------------+--------------+ -| | | K32L2 | ✔ | | ✖ | | | +| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant| | +---------+-------------+--------+------+-----------+-------------------+--------------+ | | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | | | +-------------+--------+------+-----------+-------------------+--------------+ @@ -59,12 +75,16 @@ Supported MCUs | | | 54 | ✔ | | ✔ | lpc_ip3511 | | | | +-------------+--------+------+-----------+-------------------+--------------+ | | | 55 | ✔ | | ✔ | lpc_ip3511 | | +| +---------+-------------+--------+------+-----------+-------------------+--------------+ +| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs | | +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ | Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040, pio_usb | | +--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | | +-----+-----------------+--------+------+-----------+-------------------+--------------+ -| | RA | XXX | ✔ | ✔ | | rusb2 | | +| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | +| | +-----------------+--------+------+-----------+-------------------+--------------+ +| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | +--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ @@ -96,7 +116,7 @@ Supported MCUs | +----+------------------+--------+------+-----------+-------------------+--------------+ | | L4+ | ✔ | | | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | U5 | ⚠ | | | dwc2 | | +| | U5 | ✔ | | ✔ | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ | | WBx5 | ✔ | | | stm32_fsdev | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -- cgit v1.3.1 From 426f791e7af6c8d53c828ecab37848ac833965ea Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Nov 2023 11:38:20 +0700 Subject: minor doc --- docs/reference/supported.rst | 2 +- src/device/dcd.h | 30 +++++++++++------------------- 2 files changed, 12 insertions(+), 20 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 983640dd3..c9fc4a882 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -41,7 +41,7 @@ Supported MCUs | | | dsPIC33 | ✔ | | | pic | ci_fs variant| | | +-----------------+--------+------+-----------+-------------------+--------------+ | | | 32mz | ✔ | | | pic32mz | musb variant | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ ++--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | Mind Montion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant| +--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ | NordicSemi | nRF52833, nRF52840 | ✔ | ✖ | ✖ | nrf5x | | diff --git a/src/device/dcd.h b/src/device/dcd.h index 18a708347..8c6813cf7 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -47,8 +47,7 @@ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -typedef enum -{ +typedef enum { DCD_EVENT_INVALID = 0, DCD_EVENT_BUS_RESET, DCD_EVENT_UNPLUGGED, @@ -65,13 +64,11 @@ typedef enum DCD_EVENT_COUNT } dcd_eventid_t; -typedef struct TU_ATTR_ALIGNED(4) -{ +typedef struct TU_ATTR_ALIGNED(4) { uint8_t rhport; uint8_t event_id; - union - { + union { // BUS RESET struct { tusb_speed_t speed; @@ -123,7 +120,7 @@ void dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_W //--------------------------------------------------------------------+ // Initialize controller to device mode -void dcd_init (uint8_t rhport); +void dcd_init(uint8_t rhport); // Interrupt Handler void dcd_int_handler(uint8_t rhport); @@ -184,11 +181,11 @@ void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr); void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr); // Allocate packet buffer used by ISO endpoints -// Some MCU need manual packet buffer allocation, we allocation largest size to avoid clustering +// Some MCU need manual packet buffer allocation, we allocate the largest size to avoid clustering TU_ATTR_WEAK bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size); // Configure and enable an ISO endpoint according to descriptor -TU_ATTR_WEAK bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc); +TU_ATTR_WEAK bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc); //--------------------------------------------------------------------+ // Event API (implemented by stack) @@ -198,23 +195,20 @@ TU_ATTR_WEAK bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t co extern void dcd_event_handler(dcd_event_t const * event, bool in_isr); // helper to send bus signal event -TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr) -{ +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr) { dcd_event_t event = { .rhport = rhport, .event_id = eid }; dcd_event_handler(&event, in_isr); } // helper to send bus reset event -TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr) -{ +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr) { dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_BUS_RESET }; event.bus_reset.speed = speed; dcd_event_handler(&event, in_isr); } // helper to send setup received -TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr) -{ +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr) { dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SETUP_RECEIVED }; memcpy(&event.setup_received, setup, sizeof(tusb_control_request_t)); @@ -222,8 +216,7 @@ TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport } // helper to send transfer complete event -TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr) -{ +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr) { dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_XFER_COMPLETE }; event.xfer_complete.ep_addr = ep_addr; @@ -233,8 +226,7 @@ TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport dcd_event_handler(&event, in_isr); } -static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_isr) -{ +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_isr) { dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SOF }; event.sof.frame_count = frame_count; dcd_event_handler(&event, in_isr); -- cgit v1.3.1 From 0e12d36531724f593c16bae9f4ff54a84cd1a01c Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Nov 2023 19:11:28 +0700 Subject: update doc, move sponsor to top of the page --- README.rst | 53 ++++++++++------- docs/reference/dependencies.rst | 117 ++++++++++++++++++------------------- docs/reference/getting_started.rst | 34 +++++++---- docs/reference/supported.rst | 1 - tools/gen_doc.py | 6 +- 5 files changed, 117 insertions(+), 94 deletions(-) (limited to 'docs/reference') diff --git a/README.rst b/README.rst index f400c3ec6..fe2417451 100644 --- a/README.rst +++ b/README.rst @@ -1,7 +1,16 @@ |Build Status| |Documentation Status| |Fuzzing Status| |License| -TinyUSB -======= +Sponsors +======== + +TinyUSB is funded by: Adafruit. Purchasing products from them helps to support this project. + +.. figure:: docs/assets/adafruit_logo.svg + :alt: Adafruit Logo + :target: https://www.adafruit.com + +TinyUSB Project +=============== .. figure:: docs/assets/logo.svg :alt: TinyUSB @@ -19,23 +28,28 @@ the non-ISR task function. Check out the online `documentation `_ for information about using TinyUSB and how it is implemented. + +We use `GitHub Discussions `_ as our forum. It is a great place to ask questions and advice from the community or to discuss your TinyUSB-based projects. + +For bugs and feature requests, please `raise an issue `_ and follow the templates there. + +Check out `Getting Started`_ guide for adding TinyUSB to your project or building the examples. If you are new to TinyUSB, we recommend starting with the `cdc_msc` example. + +See `Porting`_ guide for adding support for new MCUs and boards. Device Stack ============ @@ -146,6 +160,15 @@ Following CPUs are supported, check out `Supported Devices`_ for comprehensive l | WCH | CH32F20x, CH32V307, | +--------------+------------------------------------------------------------+ +License +======= + +All TinyUSB sources in the ``src`` folder are licensed under MIT +license, the `Full license is here `__. However, each file can be +individually licensed especially those in ``lib`` and ``hw/mcu`` folder. +Please make sure you understand all the license term for files you use +in your project. + Docs ==== @@ -168,16 +191,6 @@ Docs - `Structure`_ - `Porting`_ -License -======= - -All TinyUSB sources in the ``src`` folder are licensed under MIT -license, the `Full license is here `__. However, each file can be -individually licensed especially those in ``lib`` and ``hw/mcu`` folder. -Please make sure you understand all the license term for files you use -in your project. - - .. |Build Status| image:: https://github.com/hathach/tinyusb/actions/workflows/cmake_arm.yml/badge.svg :target: https://github.com/hathach/tinyusb/actions .. |Documentation Status| image:: https://readthedocs.org/projects/tinyusb/badge/?version=latest diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index d532a3a1e..6ba6692e9 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -4,62 +4,61 @@ Dependencies MCU low-level peripheral driver and external libraries for building TinyUSB examples -======================================== ============================================================== ======================================== -Path Project Commit -======================================== ============================================================== ======================================== -hw/mcu/allwinner https://github.com/hathach/allwinner_driver.git 8e5e89e8e132c0fd90e72d5422e5d3d68232b756 -hw/mcu/bridgetek/ft9xx/ft90x-sdk https://github.com/BRTSG-FOSS/ft90x-sdk.git 91060164afe239fcb394122e8bf9eb24d3194eb1 -hw/mcu/broadcom https://github.com/adafruit/broadcom-peripherals.git 08370086080759ed54ac1136d62d2ad24c6fa267 -hw/mcu/gd/nuclei-sdk https://github.com/Nuclei-Software/nuclei-sdk.git 7eb7bfa9ea4fbeacfafe1d5f77d5a0e6ed3922e7 -hw/mcu/infineon/mtb-xmclib-cat3 https://github.com/Infineon/mtb-xmclib-cat3.git daf5500d03cba23e68c2f241c30af79cd9d63880 -hw/mcu/microchip https://github.com/hathach/microchip_driver.git 9e8b37e307d8404033bb881623a113931e1edf27 -hw/mcu/mindmotion/mm32sdk https://github.com/hathach/mm32sdk.git 0b79559eb411149d36e073c1635c620e576308d4 -hw/mcu/nordic/nrfx https://github.com/NordicSemiconductor/nrfx.git 281cc2e178fd9a470d844b3afdea9eb322a0b0e8 -hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver.git 2204191ec76283371419fbcec207da02e1bc22fa -hw/mcu/nxp/lpcopen https://github.com/hathach/nxp_lpcopen.git 43c45c85405a5dd114fff0ea95cca62837740c13 -hw/mcu/nxp/mcux-sdk https://github.com/NXPmicro/mcux-sdk.git ae2ab01d9d70ad00cd0e935c2552bd5f0e5c0294 -hw/mcu/nxp/nxp_sdk https://github.com/hathach/nxp_sdk.git 845c8fc49b6fb660f06a5c45225494eacb06f00c -hw/mcu/raspberry_pi/Pico-PIO-USB https://github.com/sekigon-gonnoc/Pico-PIO-USB.git c3715ce94b6f6391856de56081d4d9b3e98fa93d -hw/mcu/renesas/fsp https://github.com/renesas/fsp.git 8dc14709f2a6518b43f71efad70d900b7718d9f1 -hw/mcu/renesas/rx https://github.com/kkitayam/rx_device.git 706b4e0cf485605c32351e2f90f5698267996023 -hw/mcu/silabs/cmsis-dfp-efm32gg12b https://github.com/cmsis-packs/cmsis-dfp-efm32gg12b.git f1c31b7887669cb230b3ea63f9b56769078960bc -hw/mcu/sony/cxd56/spresense-exported-sdk https://github.com/sonydevworld/spresense-exported-sdk.git 2ec2a1538362696118dc3fdf56f33dacaf8f4067 -hw/mcu/st/cmsis_device_f0 https://github.com/STMicroelectronics/cmsis_device_f0.git 2fc25ee22264bc27034358be0bd400b893ef837e -hw/mcu/st/cmsis_device_f1 https://github.com/STMicroelectronics/cmsis_device_f1.git 6601104a6397299b7304fd5bcd9a491f56cb23a6 -hw/mcu/st/cmsis_device_f2 https://github.com/STMicroelectronics/cmsis_device_f2.git 182fcb3681ce116816feb41b7764f1b019ce796f -hw/mcu/st/cmsis_device_f3 https://github.com/STMicroelectronics/cmsis_device_f3.git 5e4ee5ed7a7b6c85176bb70a9fd3c72d6eb99f1b -hw/mcu/st/cmsis_device_f4 https://github.com/STMicroelectronics/cmsis_device_f4.git 2615e866fa48fe1ff1af9e31c348813f2b19e7ec -hw/mcu/st/cmsis_device_f7 https://github.com/STMicroelectronics/cmsis_device_f7.git fc676ef1ad177eb874eaa06444d3d75395fc51f4 -hw/mcu/st/cmsis_device_g0 https://github.com/STMicroelectronics/cmsis_device_g0.git 08258b28ee95f50cb9624d152a1cbf084be1f9a5 -hw/mcu/st/cmsis_device_g4 https://github.com/STMicroelectronics/cmsis_device_g4.git ce822adb1dc552b3aedd13621edbc7fdae124878 -hw/mcu/st/cmsis_device_h7 https://github.com/STMicroelectronics/cmsis_device_h7.git 60dc2c913203dc8629dc233d4384dcc41c91e77f -hw/mcu/st/cmsis_device_l0 https://github.com/STMicroelectronics/cmsis_device_l0.git 06748ca1f93827befdb8b794402320d94d02004f -hw/mcu/st/cmsis_device_l1 https://github.com/STMicroelectronics/cmsis_device_l1.git 7f16ec0a1c4c063f84160b4cc6bf88ad554a823e -hw/mcu/st/cmsis_device_l4 https://github.com/STMicroelectronics/cmsis_device_l4.git 6ca7312fa6a5a460b5a5a63d66da527fdd8359a6 -hw/mcu/st/cmsis_device_l5 https://github.com/STMicroelectronics/cmsis_device_l5.git d922865fc0326a102c26211c44b8e42f52c1e53d -hw/mcu/st/cmsis_device_u5 https://github.com/STMicroelectronics/cmsis_device_u5.git bc00f3c9d8a4e25220f84c26d414902cc6bdf566 -hw/mcu/st/cmsis_device_wb https://github.com/STMicroelectronics/cmsis_device_wb.git 9c5d1920dd9fabbe2548e10561d63db829bb744f -hw/mcu/st/stm32f0xx_hal_driver https://github.com/STMicroelectronics/stm32f0xx_hal_driver.git 0e95cd88657030f640a11e690a8a5186c7712ea5 -hw/mcu/st/stm32f1xx_hal_driver https://github.com/STMicroelectronics/stm32f1xx_hal_driver.git 1dd9d3662fb7eb2a7f7d3bc0a4c1dc7537915a29 -hw/mcu/st/stm32f2xx_hal_driver https://github.com/STMicroelectronics/stm32f2xx_hal_driver.git c75ace9b908a9aca631193ebf2466963b8ea33d0 -hw/mcu/st/stm32f3xx_hal_driver https://github.com/STMicroelectronics/stm32f3xx_hal_driver.git 1761b6207318ede021706e75aae78f452d72b6fa -hw/mcu/st/stm32f4xx_hal_driver https://github.com/STMicroelectronics/stm32f4xx_hal_driver.git 04e99fbdabd00ab8f370f377c66b0a4570365b58 -hw/mcu/st/stm32f7xx_hal_driver https://github.com/STMicroelectronics/stm32f7xx_hal_driver.git f7ffdf6bf72110e58b42c632b0a051df5997e4ee -hw/mcu/st/stm32g0xx_hal_driver https://github.com/STMicroelectronics/stm32g0xx_hal_driver.git 5b53e6cee664a82b16c86491aa0060e2110c00cb -hw/mcu/st/stm32g4xx_hal_driver https://github.com/STMicroelectronics/stm32g4xx_hal_driver.git 8b4518417706d42eef5c14e56a650005abf478a8 -hw/mcu/st/stm32h7xx_hal_driver https://github.com/STMicroelectronics/stm32h7xx_hal_driver.git d8461b980b59b1625207d8c4f2ce0a9c2a7a3b04 -hw/mcu/st/stm32l0xx_hal_driver https://github.com/STMicroelectronics/stm32l0xx_hal_driver.git fbdacaf6f8c82a4e1eb9bd74ba650b491e97e17b -hw/mcu/st/stm32l1xx_hal_driver https://github.com/STMicroelectronics/stm32l1xx_hal_driver.git 44efc446fa69ed8344e7fd966e68ed11043b35d9 -hw/mcu/st/stm32l4xx_hal_driver https://github.com/STMicroelectronics/stm32l4xx_hal_driver.git aee3d5bf283ae5df87532b781bdd01b7caf256fc -hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git 675c32a75df37f39d50d61f51cb0dcf53f07e1cb -hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 2e1d4cdb386e33391cb261dfff4fefa92e4aa35a -hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 -hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 -hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 17761f5cf9dbbf2dcf665b7c04934188add20082 -hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b -lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 20285262657d1b482d132d20d755c8c330d55c1f -lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git def7d2df2b0506d3d249334974f51e427c17a41c -lib/lwip https://github.com/lwip-tcpip/lwip.git 159e31b689577dbf69cf0683bbaffbd71fa5ee10 -lib/sct_neopixel https://github.com/gsteiert/sct_neopixel.git e73e04ca63495672d955f9268e003cffe168fcd8 -tools/uf2 https://github.com/microsoft/uf2.git 19615407727073e36d81bf239c52108ba92e7660 -======================================== ============================================================== ======================================== +======================================== ============================================================== ======================================== ======================================================================================================================================================================================================= +Local Path Repo Commit Required by +======================================== ============================================================== ======================================== ======================================================================================================================================================================================================= +hw/mcu/allwinner https://github.com/hathach/allwinner_driver.git 8e5e89e8e132c0fd90e72d5422e5d3d68232b756 fc100s +hw/mcu/bridgetek/ft9xx/ft90x-sdk https://github.com/BRTSG-FOSS/ft90x-sdk.git 91060164afe239fcb394122e8bf9eb24d3194eb1 brtmm90x +hw/mcu/broadcom https://github.com/adafruit/broadcom-peripherals.git 08370086080759ed54ac1136d62d2ad24c6fa267 broadcom_32bit broadcom_64bit +hw/mcu/gd/nuclei-sdk https://github.com/Nuclei-Software/nuclei-sdk.git 7eb7bfa9ea4fbeacfafe1d5f77d5a0e6ed3922e7 gd32vf103 +hw/mcu/infineon/mtb-xmclib-cat3 https://github.com/Infineon/mtb-xmclib-cat3.git daf5500d03cba23e68c2f241c30af79cd9d63880 xmc4000 +hw/mcu/microchip https://github.com/hathach/microchip_driver.git 9e8b37e307d8404033bb881623a113931e1edf27 sam3x samd11 samd21 samd51 same5x same7x saml2x samg +hw/mcu/mindmotion/mm32sdk https://github.com/hathach/mm32sdk.git 0b79559eb411149d36e073c1635c620e576308d4 mm32 +hw/mcu/nordic/nrfx https://github.com/NordicSemiconductor/nrfx.git 2527e3c8449cfd38aee41598e8af8492f410ed15 nrf +hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver.git 2204191ec76283371419fbcec207da02e1bc22fa nuc +hw/mcu/nxp/lpcopen https://github.com/hathach/nxp_lpcopen.git 84e0bd3e43910aaf71eefd62075cf57495418312 lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 +hw/mcu/nxp/mcux-sdk https://github.com/hathach/mcux-sdk.git 950819b7de9b32f92c3edf396bc5ffb8d66e7009 kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt +hw/mcu/raspberry_pi/Pico-PIO-USB https://github.com/sekigon-gonnoc/Pico-PIO-USB.git d00a10a8c425d0d40f81b87169102944b01f3bb3 rp2040 +hw/mcu/renesas/fsp https://github.com/renesas/fsp.git d52e5a6a59b7c638da860c2bb309b6e78e752ff8 ra +hw/mcu/renesas/rx https://github.com/kkitayam/rx_device.git 706b4e0cf485605c32351e2f90f5698267996023 rx +hw/mcu/silabs/cmsis-dfp-efm32gg12b https://github.com/cmsis-packs/cmsis-dfp-efm32gg12b.git f1c31b7887669cb230b3ea63f9b56769078960bc efm32 +hw/mcu/sony/cxd56/spresense-exported-sdk https://github.com/sonydevworld/spresense-exported-sdk.git 2ec2a1538362696118dc3fdf56f33dacaf8f4067 spresense +hw/mcu/st/cmsis_device_f0 https://github.com/STMicroelectronics/cmsis_device_f0.git 2fc25ee22264bc27034358be0bd400b893ef837e stm32f0 +hw/mcu/st/cmsis_device_f1 https://github.com/STMicroelectronics/cmsis_device_f1.git 6601104a6397299b7304fd5bcd9a491f56cb23a6 stm32f1 +hw/mcu/st/cmsis_device_f2 https://github.com/STMicroelectronics/cmsis_device_f2.git 182fcb3681ce116816feb41b7764f1b019ce796f stm32f2 +hw/mcu/st/cmsis_device_f3 https://github.com/STMicroelectronics/cmsis_device_f3.git 5e4ee5ed7a7b6c85176bb70a9fd3c72d6eb99f1b stm32f3 +hw/mcu/st/cmsis_device_f4 https://github.com/STMicroelectronics/cmsis_device_f4.git 2615e866fa48fe1ff1af9e31c348813f2b19e7ec stm32f4 +hw/mcu/st/cmsis_device_f7 https://github.com/STMicroelectronics/cmsis_device_f7.git fc676ef1ad177eb874eaa06444d3d75395fc51f4 stm32f7 +hw/mcu/st/cmsis_device_g0 https://github.com/STMicroelectronics/cmsis_device_g0.git 3a23e1224417f3f2d00300ecd620495e363f2094 stm32g0 +hw/mcu/st/cmsis_device_g4 https://github.com/STMicroelectronics/cmsis_device_g4.git ce822adb1dc552b3aedd13621edbc7fdae124878 stm32g4 +hw/mcu/st/cmsis_device_h7 https://github.com/STMicroelectronics/cmsis_device_h7.git 60dc2c913203dc8629dc233d4384dcc41c91e77f stm32h7 +hw/mcu/st/cmsis_device_l0 https://github.com/STMicroelectronics/cmsis_device_l0.git 06748ca1f93827befdb8b794402320d94d02004f stm32l0 +hw/mcu/st/cmsis_device_l1 https://github.com/STMicroelectronics/cmsis_device_l1.git 7f16ec0a1c4c063f84160b4cc6bf88ad554a823e stm32l1 +hw/mcu/st/cmsis_device_l4 https://github.com/STMicroelectronics/cmsis_device_l4.git 6ca7312fa6a5a460b5a5a63d66da527fdd8359a6 stm32l4 +hw/mcu/st/cmsis_device_l5 https://github.com/STMicroelectronics/cmsis_device_l5.git d922865fc0326a102c26211c44b8e42f52c1e53d stm32l5 +hw/mcu/st/cmsis_device_u5 https://github.com/STMicroelectronics/cmsis_device_u5.git 06d7edade7167b0eafdd550bf77cfc4fa98eae2e stm32u5 +hw/mcu/st/cmsis_device_wb https://github.com/STMicroelectronics/cmsis_device_wb.git 9c5d1920dd9fabbe2548e10561d63db829bb744f stm32wb +hw/mcu/st/stm32f0xx_hal_driver https://github.com/STMicroelectronics/stm32f0xx_hal_driver.git 0e95cd88657030f640a11e690a8a5186c7712ea5 stm32f0 +hw/mcu/st/stm32f1xx_hal_driver https://github.com/STMicroelectronics/stm32f1xx_hal_driver.git 1dd9d3662fb7eb2a7f7d3bc0a4c1dc7537915a29 stm32f1 +hw/mcu/st/stm32f2xx_hal_driver https://github.com/STMicroelectronics/stm32f2xx_hal_driver.git c75ace9b908a9aca631193ebf2466963b8ea33d0 stm32f2 +hw/mcu/st/stm32f3xx_hal_driver https://github.com/STMicroelectronics/stm32f3xx_hal_driver.git 1761b6207318ede021706e75aae78f452d72b6fa stm32f3 +hw/mcu/st/stm32f4xx_hal_driver https://github.com/STMicroelectronics/stm32f4xx_hal_driver.git 04e99fbdabd00ab8f370f377c66b0a4570365b58 stm32f4 +hw/mcu/st/stm32f7xx_hal_driver https://github.com/STMicroelectronics/stm32f7xx_hal_driver.git f7ffdf6bf72110e58b42c632b0a051df5997e4ee stm32f7 +hw/mcu/st/stm32g0xx_hal_driver https://github.com/STMicroelectronics/stm32g0xx_hal_driver.git e911b12c7f67084d7f6b76157a4c0d4e2ec3779c stm32g0 +hw/mcu/st/stm32g4xx_hal_driver https://github.com/STMicroelectronics/stm32g4xx_hal_driver.git 8b4518417706d42eef5c14e56a650005abf478a8 stm32g4 +hw/mcu/st/stm32h7xx_hal_driver https://github.com/STMicroelectronics/stm32h7xx_hal_driver.git d8461b980b59b1625207d8c4f2ce0a9c2a7a3b04 stm32h7 +hw/mcu/st/stm32l0xx_hal_driver https://github.com/STMicroelectronics/stm32l0xx_hal_driver.git fbdacaf6f8c82a4e1eb9bd74ba650b491e97e17b stm32l0 +hw/mcu/st/stm32l1xx_hal_driver https://github.com/STMicroelectronics/stm32l1xx_hal_driver.git 44efc446fa69ed8344e7fd966e68ed11043b35d9 stm32l1 +hw/mcu/st/stm32l4xx_hal_driver https://github.com/STMicroelectronics/stm32l4xx_hal_driver.git aee3d5bf283ae5df87532b781bdd01b7caf256fc stm32l4 +hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git 675c32a75df37f39d50d61f51cb0dcf53f07e1cb stm32l5 +hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 4d93097a67928e9377e655ddd14622adc31b9770 stm32u5 +hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 stm32wb +hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 msp430 msp432e4 tm4c123 +hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b ch32f20x +hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 17761f5cf9dbbf2dcf665b7c04934188add20082 ch32v307 +lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 20285262657d1b482d132d20d755c8c330d55c1f imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2xstm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb +lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git 4ff01a7a4a51f53b44496aefee1e3c0071b7b173 all +lib/lwip https://github.com/lwip-tcpip/lwip.git 159e31b689577dbf69cf0683bbaffbd71fa5ee10 all +lib/sct_neopixel https://github.com/gsteiert/sct_neopixel.git e73e04ca63495672d955f9268e003cffe168fcd8 lpc55 +tools/uf2 https://github.com/microsoft/uf2.git 19615407727073e36d81bf239c52108ba92e7660 all +======================================== ============================================================== ======================================== ======================================================================================================================================================================================================= diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 1f41cb888..f2a3e7e2a 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -5,8 +5,7 @@ Getting Started Add TinyUSB to your project --------------------------- -It is relatively simple to incorporate tinyusb to your (existing) project - +It is relatively simple to incorporate tinyusb to your project * Copy or ``git submodule`` this repo into your project in a subfolder. Let's say it is *your_project/tinyusb* * Add all the .c in the ``tinyusb/src`` folder to your project @@ -46,28 +45,41 @@ For your convenience, TinyUSB contains a handful of examples for both host and d Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for tinyusb, you should download/install it first according to its manufacturer guide. -Build -^^^^^ +Dependencies +^^^^^^^^^^^^ -To build example, first change directory to an example folder. +The hardware code is located in ``hw/bsp`` folder, and is organized by family/boards. e.g raspberry_pi_pico is located in ``hw/bsp/rp2040/boards/raspberry_pi_pico`` where FAMILY=rp2040 and BOARD=raspberry_pi_pico. Before building, we firstly need to download dependencies such as: MCU low-level peripheral driver and external libraries e.g FreeRTOS (required by some examples). We can do that by either ways: + +1. Run ``tools/get_deps.py {FAMILY}`` script to download all dependencies for a family as follow. Note: For TinyUSB developer to download all dependencies, use FAMILY=all. .. code-block:: - $ cd examples/device/cdc_msc + $ python tools/get_deps.py rp2040 -Before building, we firstly need to download dependencies such as: MCU low-level peripheral driver and external libraries e.g FreeRTOS (required by some examples). Run the ``get-deps`` target in one of the example folder as follow. You only need to do this once per mcu. Check out `complete list of dependencies and their designated path here `_ +2. Or run the ``get-deps`` target in one of the example folder as follow. .. code-block:: + $ cd examples/device/cdc_msc $ make BOARD=raspberry_pi_pico get-deps -Then compile with ``make BOARD=[board_name] all``\ , for example +You only need to do this once per family. Check out `complete list of dependencies and their designated path here `_ + +Build +^^^^^ + +To build example, first change directory to an example folder. + +.. code-block:: + + $ cd examples/device/cdc_msc + +Then compile with ``make BOARD={board_name} all`` , for example .. code-block:: $ make BOARD=raspberry_pi_pico all -Note: ``BOARD`` can be found as directory name in ``hw/bsp``\ , either in its family/boards or directly under bsp (no family). Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``99-tinyusb.rules`` and reload your udev is good to go .. code-block:: @@ -75,8 +87,8 @@ Note: some examples especially those that uses Vendor class (e.g webUSB) may req $ cp examples/device/99-tinyusb.rules /etc/udev/rules.d/ $ sudo udevadm control --reload-rules && sudo udevadm trigger -Port Selection -~~~~~~~~~~~~~~ +RootHub Port Selection +~~~~~~~~~~~~~~~~~~~~~~ If a board has several ports, one port is chosen by default in the individual board.mk file. Use option ``PORT=x`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index c9fc4a882..7e7be25a4 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -300,7 +300,6 @@ LPC 18-43 - `Embedded Artists LPC4357 Developer Kit `__ - `Keil MCB1800 Evaluation Board `__ - `LPCXpresso18S37 Development Board `__ -- `NGX LPC4330-Xplorer `__ LPC 51 ^^^^^^ diff --git a/tools/gen_doc.py b/tools/gen_doc.py index 9078299cc..c63294588 100644 --- a/tools/gen_doc.py +++ b/tools/gen_doc.py @@ -13,9 +13,9 @@ TOP = Path(__file__).parent.parent.resolve() def gen_deps_doc(): deps_rst = Path(TOP) / "docs/reference/dependencies.rst" - df = pd.DataFrame.from_dict(deps_all, orient='index', columns=['Commit', 'Project']) - df = df[['Project', 'Commit']].sort_index() - df = df.rename_axis("Path") + df = pd.DataFrame.from_dict(deps_all, orient='index', columns=['Repo', 'Commit', 'Required by']) + df = df[['Repo', 'Commit', 'Required by']].sort_index() + df = df.rename_axis("Local Path") outstr = f"""\ ************ -- cgit v1.3.1 From 35615ecb6f9d884b11ac11751cdf50c3d618acbe Mon Sep 17 00:00:00 2001 From: Mengsk Date: Wed, 13 Dec 2023 17:41:54 +0100 Subject: Update doc. --- docs/reference/getting_started.rst | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index f2a3e7e2a..3db3fa206 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -178,7 +178,10 @@ Some board use uf2 bootloader for drag & drop in to mass storage device, uf2 can $ make BOARD=feather_nrf52840_express all uf2 IAR Support -^^^^^^^^^^^ +----------- + +Use project connection +^^^^^^^^^^^^^^^^^^^^^^ IAR Project Connection files are provided to import TinyUSB stack into your project. @@ -191,19 +194,19 @@ IAR Project Connection files are provided to import TinyUSB stack into your proj - `STM32L0xx_HAL_Driver` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. -* Open `Tools -> Configure Custom Argument Variables` (Switch to `Global` tab if you want to do it for all your projects) +* Open ``Tools -> Configure Custom Argument Variables`` (Switch to `Global` tab if you want to do it for all your projects) Click `New Group ...`, name it to `TUSB`, Click `Add Variable ...`, name it to `TUSB_DIR`, change it's value to the path of your TinyUSB stack, for example `C:\\tinyusb` Import stack only ~~~~~~~~~~~~~~~~~ -1. Open `Project -> Add project Connection ...`, click `OK`, choose `tinyusb\\tools\\iar_template.ipcf`. +1. Open ``Project -> Add project Connection ...``, click `OK`, choose `tinyusb\\tools\\iar_template.ipcf`. Run examples ~~~~~~~~~~~~ -1. (Python3 is needed) Run `iar_gen.py` to generate .ipcf files of examples: +1. (Python3 is needed) Run ``iar_gen.py`` to generate .ipcf files of examples: .. code-block:: @@ -212,3 +215,15 @@ Run examples 2. Open `Project -> Add project Connection ...`, click `OK`, choose `tinyusb\\examples\\(.ipcf of example)`. For example `C:\\tinyusb\\examples\\device\\cdc_msc\\iar_cdc_msc.ipcf` + +Native CMake support (9.50.1+) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +With 9.50.1 release, IAR added experimental native CMake support (strangely not mentioned in public release note). Now it's possible to import CMakeLists.txt then build and debug as a normal project. + +Following these steps: + +1. Add IAR compiler binary path to system ``PATH`` environment variable, such as ``C:\Program Files\IAR Systems\Embedded Workbench 9.2\arm\bin``. +2. Create new project in IAR, in Tool chain dropdown menu, choose CMake for Arm then Import ``CMakeLists.txt`` from chosen example directory. +3. Set up board option in ``Option - CMake/CMSIS-TOOLBOX - CMake``, for example :code:`-DBOARD=stm32f439nucleo -DTOOLCHAIN=iar`, **Uncheck 'Override tools in env'**. +4. (For debug only) Choose correct CPU model in ``Option - General Options - Target``, to profit register and memory view. -- cgit v1.3.1 From 64bc0aac551d13cf781a2b41b6239b0716f61049 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 26 Mar 2024 10:39:51 +0700 Subject: update doc index.rst to match readme.rst (duplicated) --- docs/reference/index.rst | 47 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 36 insertions(+), 11 deletions(-) (limited to 'docs/reference') diff --git a/docs/reference/index.rst b/docs/reference/index.rst index a9663ee7d..9ecdf619b 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -4,44 +4,69 @@ Reference .. figure:: ../assets/stack.svg :width: 1600px - :alt: stackup + :alt: TinyUSB + +:: + + . + ├── docs # Documentation + ├── examples # Examples with make and cmake build system + ├── hw + │ ├── bsp # Supported boards source files + │ └── mcu # Low level mcu core & peripheral drivers + ├── lib # Sources from 3rd party such as freeRTOS, fatfs ... + ├── src # All sources files for TinyUSB stack itself. + ├── test # Tests: unit test, fuzzing, hardware test + └── tools # Files used internally - representation of the TinyUSB stack. Device Stack ============ -Supports multiple device configurations by dynamically changing usb descriptors. Low power functions such like suspend, resume, and remote wakeup. Following device classes are supported: +Supports multiple device configurations by dynamically changing USB descriptors, low power functions such like suspend, resume, and remote wakeup. The following device classes are supported: - Audio Class 2.0 (UAC2) - Bluetooth Host Controller Interface (BTH HCI) -- Communication Class (CDC) -- Device Firmware Update (DFU): DFU mode (WIP) and Runtinme +- Communication Device Class (CDC) +- Device Firmware Update (DFU): DFU mode (WIP) and Runtime - Human Interface Device (HID): Generic (In & Out), Keyboard, Mouse, Gamepad etc ... - Mass Storage Class (MSC): with multiple LUNs - Musical Instrument Digital Interface (MIDI) -- Network with RNDIS, CDC-ECM (work in progress) -- USB Test and Measurement Class (USBTMC) +- Network with RNDIS, Ethernet Control Model (ECM), Network Control Model (NCM) +- Test and Measurement Class (USBTMC) +- Video class 1.5 (UVC): work in progress - Vendor-specific class support with generic In & Out endpoints. Can be used with MS OS 2.0 compatible descriptor to load winUSB driver without INF file. - `WebUSB `__ with vendor-specific class -If you have special need, `usbd_app_driver_get_cb()` can be used to write your own class driver without modifying the stack. Here is how RPi team add their reset interface `raspberrypi/pico-sdk#197 `__ +If you have a special requirement, `usbd_app_driver_get_cb()` can be used to write your own class driver without modifying the stack. Here is how the RPi team added their reset interface `raspberrypi/pico-sdk#197 `_ Host Stack ========== - Human Interface Device (HID): Keyboard, Mouse, Generic - Mass Storage Class (MSC) -- Hub currently only supports 1 level of hub (due to my laziness) +- Communication Device Class: CDC-ACM +- Vendor serial over USB: FTDI, CP210x +- Hub with multiple-level support + +Similar to the Device Stack, if you have a special requirement, `usbh_app_driver_get_cb()` can be used to write your own class driver without modifying the stack. + +TypeC PD Stack +============== + +- Power Delivery 3.0 (PD3.0) with USB Type-C support (WIP) +- Super early stage, only for testing purpose +- Only support STM32 G4 OS Abstraction layer ==================== -TinyUSB is completely thread-safe by pushing all ISR events into a central queue, then process it later in the non-ISR context task function. It also uses semaphore/mutex to access shared resources such as CDC FIFO. Therefore the stack needs to use some of OS's basic APIs. Following OSes are already supported out of the box. +TinyUSB is completely thread-safe by pushing all Interrupt Service Request (ISR) events into a central queue, then processing them later in the non-ISR context task function. It also uses semaphore/mutex to access shared resources such as Communication Device Class (CDC) FIFO. Therefore the stack needs to use some of the OS's basic APIs. Following OSes are already supported out of the box. - **No OS** - **FreeRTOS** -- **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its `own repo `__ +- `RT-Thread `_: `repo `_ +- **Mynewt** Due to the newt package build system, Mynewt examples are better to be on its `own repo `_ License ======= -- cgit v1.3.1