From 19f67ffc22bcf9a59125b0f992bf6e8ee9819eec Mon Sep 17 00:00:00 2001 From: Dalton Caron Date: Tue, 9 Sep 2025 14:09:26 -0700 Subject: Initial STM32WBARI eval support Clean up includes definitions Remove wait that is not required Remove redundant settings Clean up clock configuration to look like other modules Remove MSP_Init that is not required Clean up driver code dhcp: Fix DHCP_OFFER/DHCP_ACK destinaton. In RFC 2131, the destination of DHCP OFFER/ACK is defined in Section 4.1. Fix the destination error by following the rule of RFC 2131. TODO: We implement all rule but the last one. ARP table is required to associate client's macaddr. Currently, fallback to broadcast. Signed-off-by: Elwin Huang Fix compile error. Fix goto indentation Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Fix osal_spin_unlock for mynewt Mynewt version for osal_spin_unlock() called OS_ENTER_CRITICAL instead of OS_EXIT_CRITICAL. Signed-off-by: Jerzy Kasenberg Add ESP32-C5 and ESP32-C61 definitions fix(dcd/dwc2): Fix reset procedure for versions >=4.20a Fix STM32L4 GPIOD clock enable for variants without GPIOD Add weact blackpill support Add to boards.rst file Fix file Small cleanups. Insert small delay for LowSpeed device Improve retry operation at NAK response. Remove dynamic memory allocation use tusb_time_millis_api() instead of board_millis() make loopdelay() always inline update at32f405 dwc2 info and phy width selection add at32f415 dwc2 info add some consumer page configs remove duplicated enum Initial plan Fix obsolete cnt assignment in _tu_fifo_peek() overflow check Co-authored-by: hathach <249515+hathach@users.noreply.github.com> Initial plan Update STM32 CMSIS dependencies to fix HSITRIM register bug Co-authored-by: hathach <249515+hathach@users.noreply.github.com> Remove accidentally committed dependency directories Co-authored-by: hathach <249515+hathach@users.noreply.github.com> Update all STM32 HAL driver dependencies to latest versions Co-authored-by: hathach <249515+hathach@users.noreply.github.com> fix linker h745 issue with clang fix linker h745 issue with clang Update all STM32 CMSIS device dependencies to latest versions Co-authored-by: hathach <249515+hathach@users.noreply.github.com> update pio-usb Create comprehensive GitHub Copilot instructions and fix pre-commit configuration for TinyUSB (#3234) * Initial plan * Create comprehensive GitHub Copilot instructions for TinyUSB Co-authored-by: hathach <249515+hathach@users.noreply.github.com> * Remove accidentally committed dependencies, use tools/get_deps.py instead Co-authored-by: hathach <249515+hathach@users.noreply.github.com> * Fix .gitignore: ignore vendor/ directory not ceedling script Co-authored-by: hathach <249515+hathach@users.noreply.github.com> * Revert .gitignore changes and add README_processed.rst Co-authored-by: hathach <249515+hathach@users.noreply.github.com> * Remove README_processed.rst and revert ceedling file permissions Co-authored-by: hathach <249515+hathach@users.noreply.github.com> * Changes before error encountered Co-authored-by: hathach <249515+hathach@users.noreply.github.com> * Remove redundant manual validation step, keep only pre-commit and build validation Co-authored-by: hathach <249515+hathach@users.noreply.github.com> * fix pre-commit --------- Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: hathach <249515+hathach@users.noreply.github.com> modified the bsp files of at32 to make them work better the family name error of at32 has been corrected fix pre-commit STM32N6570-DK board is added. Build with DEBUG=1 (make BOARD=stm32n6570dk DEBUG=1 all), otherwise it does not work for now. Tested with examples/device/cdc_dual_ports --- docs/reference/boards.rst | 1 + docs/reference/dependencies.rst | 1 + 2 files changed, 2 insertions(+) (limited to 'docs') diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index 71dca8e94..a930f485b 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -303,6 +303,7 @@ stm32u575eval STM32 U575 Eval stm32u5 https://www.s stm32u575nucleo STM32 U575 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u575zi-q.html stm32u5a5nucleo STM32 U5a5 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u5a5zj-q.html stm32wb55nucleo STM32 P-NUCLEO-WB55 stm32wb https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html +stm32wba65nucleo STM32 NUCLEO-WBA65RI stm32wba https://www.st.com/en/evaluation-tools/nucleo-wba65ri.html =================== ================================= ========= ================================================================= ====== Sunxi diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index d75139aae..8a65eee86 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -71,6 +71,7 @@ hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/ hw/mcu/st/stm32n6xx_hal_driver https://github.com/STMicroelectronics/stm32n6xx-hal-driver.git 49f9989d10cf6817d4b07ac01848956b46bd0fd6 stm32n6 hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 4d93097a67928e9377e655ddd14622adc31b9770 stm32u5 hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 stm32wb +hw/mcu/st/stm32wbaxx_hal_driver https://github.com/STMicroelectronics/stm32wbaxx-hal-driver.git 9442fbb71f855ff2e64fbf662b7726beba511a24 stm32wba hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 msp430 msp432e4 tm4c hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b ch32f20x hw/mcu/wch/ch32v103 https://github.com/openwch/ch32v103.git 7578cae0b21f86dd053a1f781b2fc6ab99d0ec17 ch32v10x -- cgit v1.3.1 From 913597707493ed7ac075d420795574bc7faa3075 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 12 Sep 2025 11:26:16 +0700 Subject: rename stm32wba eval to nucleo use local linker to fix READONLY keyword with clang add wba to ci build --- .github/workflows/ci_set_matrix.py | 1 + docs/reference/dependencies.rst | 81 +++--- hw/bsp/stm32wba/boards/stm32wba_eval/board.cmake | 8 - hw/bsp/stm32wba/boards/stm32wba_eval/board.h | 136 ---------- hw/bsp/stm32wba/boards/stm32wba_eval/board.mk | 6 - hw/bsp/stm32wba/boards/stm32wba_nucleo/board.cmake | 8 + hw/bsp/stm32wba/boards/stm32wba_nucleo/board.h | 136 ++++++++++ hw/bsp/stm32wba/boards/stm32wba_nucleo/board.mk | 6 + hw/bsp/stm32wba/family.c | 281 ++++++++++----------- hw/bsp/stm32wba/family.cmake | 47 ++-- hw/bsp/stm32wba/family.mk | 9 +- hw/bsp/stm32wba/linker/STM32WBA65xx_FLASH_ns.ld | 188 ++++++++++++++ 12 files changed, 534 insertions(+), 373 deletions(-) delete mode 100644 hw/bsp/stm32wba/boards/stm32wba_eval/board.cmake delete mode 100644 hw/bsp/stm32wba/boards/stm32wba_eval/board.h delete mode 100644 hw/bsp/stm32wba/boards/stm32wba_eval/board.mk create mode 100644 hw/bsp/stm32wba/boards/stm32wba_nucleo/board.cmake create mode 100644 hw/bsp/stm32wba/boards/stm32wba_nucleo/board.h create mode 100644 hw/bsp/stm32wba/boards/stm32wba_nucleo/board.mk create mode 100644 hw/bsp/stm32wba/linker/STM32WBA65xx_FLASH_ns.ld (limited to 'docs') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 40d51a7a2..3559909ba 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -45,6 +45,7 @@ family_list = { "stm32l0 stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32n6": ["arm-gcc"], "stm32u5 stm32wb": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32wba": ["arm-gcc", "arm-clang"], "xmc4000": ["arm-gcc"], "-bespressif_s2_devkitc": ["esp-idf"], # S3, P4 will be built by hil test diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index 8a65eee86..ca5c84151 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -26,52 +26,53 @@ hw/mcu/nordic/nrfx https://github.com/NordicSemiconductor hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver.git 2204191ec76283371419fbcec207da02e1bc22fa nuc hw/mcu/nxp/lpcopen https://github.com/hathach/nxp_lpcopen.git b41cf930e65c734d8ec6de04f1d57d46787c76ae lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 hw/mcu/nxp/mcux-sdk https://github.com/nxp-mcuxpresso/mcux-sdk a1bdae309a14ec95a4f64a96d3315a4f89c397c6 kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt -hw/mcu/raspberry_pi/Pico-PIO-USB https://github.com/sekigon-gonnoc/Pico-PIO-USB.git 3c1eec341a5232640e4c00628b889b641af34b28 rp2040 +hw/mcu/raspberry_pi/Pico-PIO-USB https://github.com/sekigon-gonnoc/Pico-PIO-USB.git 675543bcc9baa8170f868ab7ba316d418dbcf41f rp2040 hw/mcu/renesas/fsp https://github.com/renesas/fsp.git edcc97d684b6f716728a60d7a6fea049d9870bd6 ra hw/mcu/renesas/rx https://github.com/kkitayam/rx_device.git 706b4e0cf485605c32351e2f90f5698267996023 rx hw/mcu/silabs/cmsis-dfp-efm32gg12b https://github.com/cmsis-packs/cmsis-dfp-efm32gg12b.git f1c31b7887669cb230b3ea63f9b56769078960bc efm32 hw/mcu/sony/cxd56/spresense-exported-sdk https://github.com/sonydevworld/spresense-exported-sdk.git 2ec2a1538362696118dc3fdf56f33dacaf8f4067 spresense -hw/mcu/st/cmsis_device_c0 https://github.com/STMicroelectronics/cmsis_device_c0.git fb56b1b70c73b74eacda2a4bcc36886444364ab3 stm32c0 -hw/mcu/st/cmsis_device_f0 https://github.com/STMicroelectronics/cmsis_device_f0.git 2fc25ee22264bc27034358be0bd400b893ef837e stm32f0 -hw/mcu/st/cmsis_device_f1 https://github.com/STMicroelectronics/cmsis_device_f1.git 6601104a6397299b7304fd5bcd9a491f56cb23a6 stm32f1 -hw/mcu/st/cmsis_device_f2 https://github.com/STMicroelectronics/cmsis_device_f2.git 182fcb3681ce116816feb41b7764f1b019ce796f stm32f2 -hw/mcu/st/cmsis_device_f3 https://github.com/STMicroelectronics/cmsis_device_f3.git 5e4ee5ed7a7b6c85176bb70a9fd3c72d6eb99f1b stm32f3 -hw/mcu/st/cmsis_device_f4 https://github.com/STMicroelectronics/cmsis_device_f4.git 2615e866fa48fe1ff1af9e31c348813f2b19e7ec stm32f4 -hw/mcu/st/cmsis_device_f7 https://github.com/STMicroelectronics/cmsis_device_f7.git 25b0463439303b7a38f0d27b161f7d2f3c096e79 stm32f7 -hw/mcu/st/cmsis_device_g0 https://github.com/STMicroelectronics/cmsis_device_g0.git 3a23e1224417f3f2d00300ecd620495e363f2094 stm32g0 -hw/mcu/st/cmsis_device_g4 https://github.com/STMicroelectronics/cmsis_device_g4.git ce822adb1dc552b3aedd13621edbc7fdae124878 stm32g4 -hw/mcu/st/cmsis_device_h5 https://github.com/STMicroelectronics/cmsis_device_h5.git cd2d1d579743de57b88ccaf61a968b9c05848ffc stm32h5 -hw/mcu/st/cmsis_device_h7 https://github.com/STMicroelectronics/cmsis_device_h7.git 60dc2c913203dc8629dc233d4384dcc41c91e77f stm32h7 -hw/mcu/st/cmsis_device_h7rs https://github.com/STMicroelectronics/cmsis_device_h7rs.git 832649d1fd09bd901e9f68e979522e5c209ebf20 stm32h7rs -hw/mcu/st/cmsis_device_l0 https://github.com/STMicroelectronics/cmsis_device_l0.git 69cd5999fd40ae6e546d4905b21635c6ca1bcb92 stm32l0 -hw/mcu/st/cmsis_device_l1 https://github.com/STMicroelectronics/cmsis_device_l1.git 7f16ec0a1c4c063f84160b4cc6bf88ad554a823e stm32l1 -hw/mcu/st/cmsis_device_l4 https://github.com/STMicroelectronics/cmsis_device_l4.git 6ca7312fa6a5a460b5a5a63d66da527fdd8359a6 stm32l4 -hw/mcu/st/cmsis_device_l5 https://github.com/STMicroelectronics/cmsis_device_l5.git d922865fc0326a102c26211c44b8e42f52c1e53d stm32l5 -hw/mcu/st/cmsis_device_n6 https://github.com/STMicroelectronics/cmsis-device-n6.git f818b00f775444e8d19ef6cad822534c345e054f stm32n6 -hw/mcu/st/cmsis_device_u5 https://github.com/STMicroelectronics/cmsis_device_u5.git 5ad9797c54ec3e55eff770fc9b3cd4a1aefc1309 stm32u5 -hw/mcu/st/cmsis_device_wb https://github.com/STMicroelectronics/cmsis_device_wb.git d6a7fa2e7de084f5e5e47f2ab88b022fe9b50e5a stm32wb +hw/mcu/st/cmsis-device-wba https://github.com/STMicroelectronics/cmsis-device-wba.git 647d8522e5fd15049e9a1cc30ed19d85e5911eaf stm32wba +hw/mcu/st/cmsis_device_c0 https://github.com/STMicroelectronics/cmsis_device_c0.git 517611273f835ffe95318947647bc1408f69120d stm32c0 +hw/mcu/st/cmsis_device_f0 https://github.com/STMicroelectronics/cmsis_device_f0.git cbb5da5d48b4b5f2efacdc2f033be30f9d29889f stm32f0 +hw/mcu/st/cmsis_device_f1 https://github.com/STMicroelectronics/cmsis_device_f1.git c8e9a4a4f16b6d2cb2a2083cbe5161025280fb22 stm32f1 +hw/mcu/st/cmsis_device_f2 https://github.com/STMicroelectronics/cmsis_device_f2.git 49321f1e4d2bd3e65687b37f2652a28ea7983674 stm32f2 +hw/mcu/st/cmsis_device_f3 https://github.com/STMicroelectronics/cmsis_device_f3.git 5558e64e3675a1e1fcb1c71f468c7c407c1b1134 stm32f3 +hw/mcu/st/cmsis_device_f4 https://github.com/STMicroelectronics/cmsis_device_f4.git 3c77349ce04c8af401454cc51f85ea9a50e34fc1 stm32f4 +hw/mcu/st/cmsis_device_f7 https://github.com/STMicroelectronics/cmsis_device_f7.git 2352e888e821aa0f4fe549bd5ea81d29c67a3222 stm32f7 +hw/mcu/st/cmsis_device_g0 https://github.com/STMicroelectronics/cmsis_device_g0.git f484fe852535f913a02ee79787eafa74dd7f9488 stm32g0 +hw/mcu/st/cmsis_device_g4 https://github.com/STMicroelectronics/cmsis_device_g4.git 7c39c32593b03764aaa57531588b8bf7cdd443a5 stm32g4 +hw/mcu/st/cmsis_device_h5 https://github.com/STMicroelectronics/cmsis_device_h5.git 5273b8f134ba65f5b8174c4141b711b5c0d295b2 stm32h5 +hw/mcu/st/cmsis_device_h7 https://github.com/STMicroelectronics/cmsis_device_h7.git 45b818cab6ee2806e3a27c80e330957223424392 stm32h7 +hw/mcu/st/cmsis_device_h7rs https://github.com/STMicroelectronics/cmsis_device_h7rs.git 57ea11f70ebf1850e1048989d665c9070f0bb863 stm32h7rs +hw/mcu/st/cmsis_device_l0 https://github.com/STMicroelectronics/cmsis_device_l0.git 7b7ae8cd71437331e1d7824f157d00c7bb4a5044 stm32l0 +hw/mcu/st/cmsis_device_l1 https://github.com/STMicroelectronics/cmsis_device_l1.git a23ade4ccf14012085fedf862e33a536ab7ed8be stm32l1 +hw/mcu/st/cmsis_device_l4 https://github.com/STMicroelectronics/cmsis_device_l4.git a2530753e86dd326a75467d28feb92e2ba7d0df2 stm32l4 +hw/mcu/st/cmsis_device_l5 https://github.com/STMicroelectronics/cmsis_device_l5.git 7d9a51481f0e6c376e62c3c849e6caf652c66482 stm32l5 +hw/mcu/st/cmsis_device_n6 https://github.com/STMicroelectronics/cmsis-device-n6.git 7bcdc944fbf7cf5928d3c1d14054ca13261d33ec stm32n6 +hw/mcu/st/cmsis_device_u5 https://github.com/STMicroelectronics/cmsis_device_u5.git 6e67187dec98035893692ab2923914cb5f4e0117 stm32u5 +hw/mcu/st/cmsis_device_wb https://github.com/STMicroelectronics/cmsis_device_wb.git cda2cb9fc4a5232ab18efece0bb06b0b60910083 stm32wb hw/mcu/st/stm32-mfxstm32l152 https://github.com/STMicroelectronics/stm32-mfxstm32l152.git 7f4389efee9c6a655b55e5df3fceef5586b35f9b stm32h7 hw/mcu/st/stm32-tcpp0203 https://github.com/STMicroelectronics/stm32-tcpp0203.git 9918655bff176ac3046ccf378b5c7bbbc6a38d15 stm32h7rs stm32n6 -hw/mcu/st/stm32c0xx_hal_driver https://github.com/STMicroelectronics/stm32c0xx_hal_driver.git 41253e2f1d7ae4a4d0c379cf63f5bcf71fcf8eb3 stm32c0 -hw/mcu/st/stm32f0xx_hal_driver https://github.com/STMicroelectronics/stm32f0xx_hal_driver.git 0e95cd88657030f640a11e690a8a5186c7712ea5 stm32f0 -hw/mcu/st/stm32f1xx_hal_driver https://github.com/STMicroelectronics/stm32f1xx_hal_driver.git 1dd9d3662fb7eb2a7f7d3bc0a4c1dc7537915a29 stm32f1 -hw/mcu/st/stm32f2xx_hal_driver https://github.com/STMicroelectronics/stm32f2xx_hal_driver.git c75ace9b908a9aca631193ebf2466963b8ea33d0 stm32f2 -hw/mcu/st/stm32f3xx_hal_driver https://github.com/STMicroelectronics/stm32f3xx_hal_driver.git 1761b6207318ede021706e75aae78f452d72b6fa stm32f3 -hw/mcu/st/stm32f4xx_hal_driver https://github.com/STMicroelectronics/stm32f4xx_hal_driver.git 04e99fbdabd00ab8f370f377c66b0a4570365b58 stm32f4 -hw/mcu/st/stm32f7xx_hal_driver https://github.com/STMicroelectronics/stm32f7xx_hal_driver.git f7ffdf6bf72110e58b42c632b0a051df5997e4ee stm32f7 -hw/mcu/st/stm32g0xx_hal_driver https://github.com/STMicroelectronics/stm32g0xx_hal_driver.git e911b12c7f67084d7f6b76157a4c0d4e2ec3779c stm32g0 -hw/mcu/st/stm32g4xx_hal_driver https://github.com/STMicroelectronics/stm32g4xx_hal_driver.git 8b4518417706d42eef5c14e56a650005abf478a8 stm32g4 -hw/mcu/st/stm32h5xx_hal_driver https://github.com/STMicroelectronics/stm32h5xx_hal_driver.git 2cf77de584196d619cec1b4586c3b9e2820a254e stm32h5 -hw/mcu/st/stm32h7rsxx_hal_driver https://github.com/STMicroelectronics/stm32h7rsxx-hal-driver.git 7ca2e07ca21bc66b53654e845b4c85c884343b60 stm32h7rs -hw/mcu/st/stm32h7xx_hal_driver https://github.com/STMicroelectronics/stm32h7xx_hal_driver.git d8461b980b59b1625207d8c4f2ce0a9c2a7a3b04 stm32h7 -hw/mcu/st/stm32l0xx_hal_driver https://github.com/STMicroelectronics/stm32l0xx_hal_driver.git fbdacaf6f8c82a4e1eb9bd74ba650b491e97e17b stm32l0 -hw/mcu/st/stm32l1xx_hal_driver https://github.com/STMicroelectronics/stm32l1xx_hal_driver.git 44efc446fa69ed8344e7fd966e68ed11043b35d9 stm32l1 -hw/mcu/st/stm32l4xx_hal_driver https://github.com/STMicroelectronics/stm32l4xx_hal_driver.git aee3d5bf283ae5df87532b781bdd01b7caf256fc stm32l4 -hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git 675c32a75df37f39d50d61f51cb0dcf53f07e1cb stm32l5 -hw/mcu/st/stm32n6xx_hal_driver https://github.com/STMicroelectronics/stm32n6xx-hal-driver.git 49f9989d10cf6817d4b07ac01848956b46bd0fd6 stm32n6 -hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 4d93097a67928e9377e655ddd14622adc31b9770 stm32u5 -hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 stm32wb -hw/mcu/st/stm32wbaxx_hal_driver https://github.com/STMicroelectronics/stm32wbaxx-hal-driver.git 9442fbb71f855ff2e64fbf662b7726beba511a24 stm32wba +hw/mcu/st/stm32c0xx_hal_driver https://github.com/STMicroelectronics/stm32c0xx_hal_driver.git c283b143bef6bdaacf64240ee6f15eb61dad6125 stm32c0 +hw/mcu/st/stm32f0xx_hal_driver https://github.com/STMicroelectronics/stm32f0xx_hal_driver.git 94399697cb5eeaf8511b81b7f50dc62f0a5a3f6c stm32f0 +hw/mcu/st/stm32f1xx_hal_driver https://github.com/STMicroelectronics/stm32f1xx_hal_driver.git 18074e3e5ecad0b380a5cf5a9131fe4b5ed1b2b7 stm32f1 +hw/mcu/st/stm32f2xx_hal_driver https://github.com/STMicroelectronics/stm32f2xx_hal_driver.git ae7b47fe41cf75ccaf65cbf8ee8749b18ba0e0f3 stm32f2 +hw/mcu/st/stm32f3xx_hal_driver https://github.com/STMicroelectronics/stm32f3xx_hal_driver.git e098c8c8ce6f426bcee7db3a37c0932ea881eb0b stm32f3 +hw/mcu/st/stm32f4xx_hal_driver https://github.com/STMicroelectronics/stm32f4xx_hal_driver.git b6f0ed3829f3829eb358a2e7417d80bba1a42db7 stm32f4 +hw/mcu/st/stm32f7xx_hal_driver https://github.com/STMicroelectronics/stm32f7xx_hal_driver.git e1446fa12ffda80ea1016faf349e45b2047fff12 stm32f7 +hw/mcu/st/stm32g0xx_hal_driver https://github.com/STMicroelectronics/stm32g0xx_hal_driver.git a248a9e484d58943b46c68f6c49b4b276778bd59 stm32g0 +hw/mcu/st/stm32g4xx_hal_driver https://github.com/STMicroelectronics/stm32g4xx_hal_driver.git 10138a41749ea62d53ecab65b2bc2a950acc04d2 stm32g4 +hw/mcu/st/stm32h5xx_hal_driver https://github.com/STMicroelectronics/stm32h5xx_hal_driver.git 3c84eaa6000ab620be01afbcfba2735389afe09b stm32h5 +hw/mcu/st/stm32h7rsxx_hal_driver https://github.com/STMicroelectronics/stm32h7rsxx-hal-driver.git 9e83b95ae0f70faa067eddce2da617d180937f9b stm32h7rs +hw/mcu/st/stm32h7xx_hal_driver https://github.com/STMicroelectronics/stm32h7xx_hal_driver.git dbfb749f229e1aa89e50b54229ca87766e180d2d stm32h7 +hw/mcu/st/stm32l0xx_hal_driver https://github.com/STMicroelectronics/stm32l0xx_hal_driver.git 65da4cd8a10ad859ec8d9cd71f3f6c50735bd473 stm32l0 +hw/mcu/st/stm32l1xx_hal_driver https://github.com/STMicroelectronics/stm32l1xx_hal_driver.git 54f0b7568ce2acb33d090c70c897ee32229c1d32 stm32l1 +hw/mcu/st/stm32l4xx_hal_driver https://github.com/STMicroelectronics/stm32l4xx_hal_driver.git 3e039bbf62f54bbd834d578185521cff80596efe stm32l4 +hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git 3340b9a597bcf75cc173345a90a74aa2a4a37510 stm32l5 +hw/mcu/st/stm32n6xx_hal_driver https://github.com/STMicroelectronics/stm32n6xx-hal-driver.git bc6c41f8f67d61b47af26695d0bf67762a000666 stm32n6 +hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 2c5e2568fbdb1900a13ca3b2901fdd302cac3444 stm32u5 +hw/mcu/st/stm32wbaxx_hal_driver https://github.com/STMicroelectronics/stm32wbaxx_hal_driver.git 9442fbb71f855ff2e64fbf662b7726beba511a24 stm32wba +hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git d60dd46996876506f1d2e9abd6b1cc110c8004cd stm32wb hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 msp430 msp432e4 tm4c hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b ch32f20x hw/mcu/wch/ch32v103 https://github.com/openwch/ch32v103.git 7578cae0b21f86dd053a1f781b2fc6ab99d0ec17 ch32v10x diff --git a/hw/bsp/stm32wba/boards/stm32wba_eval/board.cmake b/hw/bsp/stm32wba/boards/stm32wba_eval/board.cmake deleted file mode 100644 index 57bd920d3..000000000 --- a/hw/bsp/stm32wba/boards/stm32wba_eval/board.cmake +++ /dev/null @@ -1,8 +0,0 @@ -set(MCU_VARIANT stm32wba65xx) -set(JLINK_DEVICE STM32WBA65RI) - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - STM32WBA65xx - ) -endfunction() diff --git a/hw/bsp/stm32wba/boards/stm32wba_eval/board.h b/hw/bsp/stm32wba/boards/stm32wba_eval/board.h deleted file mode 100644 index eb0622399..000000000 --- a/hw/bsp/stm32wba/boards/stm32wba_eval/board.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2025, Dalton Caron - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - - /* metadata: - name: STM32 NUCLEO-WBA65RI - url: https://www.st.com/en/evaluation-tools/nucleo-wba65ri.html - */ -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus -extern "C" { -#endif - - // LED (user LED 1) -#define LED_CLK_EN __HAL_RCC_GPIOD_CLK_ENABLE -#define LED_PORT GPIOD -#define LED_PIN GPIO_PIN_8 -#define LED_STATE_ON 1 - -// Button (user button 1) -#define BUTTON_CLK_EN __HAL_RCC_GPIOC_CLK_ENABLE -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 0 - -// USART (on STM link USB connector) -#define USART_GPIO_CLK_EN __HAL_RCC_GPIOB_CLK_ENABLE(); __HAL_RCC_GPIOA_CLK_ENABLE -#define USART_DEV USART3 -#define USART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define USART_TX_GPIO_PORT GPIOA -#define USART_RX_GPIO_PORT GPIOA -#define USART_GPIO_AF GPIO_AF8_USART3 -#define USART_TX_PIN GPIO_PIN_7 -#define USART_RX_PIN GPIO_PIN_5 - -// USB Pins -// These pints are only used for USB and must be in analog mode when not used. -// They are by default configured for USB operation after reset. -#define USB_DP_PORT GPIOD -#define USB_DP_PIN GPIO_PIN_6 - -#define USB_DM_PORT GPIOD -#define USB_DM_PIN GPIO_PIN_7 - -//--------------------------------------------------------------------+ -// The system clock is configured as follows: -// System Clock source = PLL (HSE, crystal) -// SYSCLK (CPU Clock) = 64 MHz -// HCLK (AXI and AHB Clocks) = 64 MHz -// AHB Prescaler = 1 -// APB1 Prescaler = 1 (APB3 Clock = 64MHz) -// APB2 Prescaler = 1 (APB1 Clock = 64MHz) -// APB7 Prescaler = 1 (APB2 Clock = 64MHz) -// HPRE5 Prescaler = 2 (AHB5 Clock = 32MHz) -// HSE Frequency (Hz) = 32 MHz -// PLL_M = 2 -// PLL_N = 8 -// PLL_P = 2 -// PLL_Q = 2 -// PLL_R = 2 -// VDD (V) = 3.3 V -// Flash Latency = 1 Wait States -//--------------------------------------------------------------------+ -static void board_system_clock_config( void ) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; - RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; - - __HAL_RCC_SYSCFG_CLK_ENABLE(); - __HAL_RCC_PWR_CLK_ENABLE(); - - ( void ) HAL_PWREx_ConfigSupply( PWR_LDO_SUPPLY ); - - // Must be in voltage scaling mode 1 for the OTG USB HS peripheral to function - ( void ) HAL_PWREx_ControlVoltageScaling( PWR_REGULATOR_VOLTAGE_SCALE1 ); - - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSEDiv = RCC_HSE_DIV1; - RCC_OscInitStruct.PLL1.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL1.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL1.PLLM = 2; - RCC_OscInitStruct.PLL1.PLLN = 8; - RCC_OscInitStruct.PLL1.PLLP = 2; - RCC_OscInitStruct.PLL1.PLLQ = 2; - RCC_OscInitStruct.PLL1.PLLR = 2; - RCC_OscInitStruct.PLL1.PLLFractional = 0; - ( void ) HAL_RCC_OscConfig( &RCC_OscInitStruct ); - - RCC_ClkInitStruct.ClockType = ( RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK - | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 - | RCC_CLOCKTYPE_PCLK7 | RCC_CLOCKTYPE_HCLK5 ); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB7CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.AHB5_PLL1_CLKDivider = RCC_SYSCLK_PLL1_DIV2; - RCC_ClkInitStruct.AHB5_HSEHSI_CLKDivider = RCC_SYSCLK_HSEHSI_DIV1; - - ( void ) HAL_RCC_ClockConfig( &RCC_ClkInitStruct, FLASH_LATENCY_1 ); - - ( void ) SystemCoreClockUpdate(); - - ( void ) HAL_ICACHE_Enable(); -} - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32wba/boards/stm32wba_eval/board.mk b/hw/bsp/stm32wba/boards/stm32wba_eval/board.mk deleted file mode 100644 index dc8463ca0..000000000 --- a/hw/bsp/stm32wba/boards/stm32wba_eval/board.mk +++ /dev/null @@ -1,6 +0,0 @@ -MCU_VARIANT = stm32wba65xx - -CFLAGS += -DSTM32WBA65xx - -# For flash-jlink target -JLINK_DEVICE = STM32WBA65RI diff --git a/hw/bsp/stm32wba/boards/stm32wba_nucleo/board.cmake b/hw/bsp/stm32wba/boards/stm32wba_nucleo/board.cmake new file mode 100644 index 000000000..57bd920d3 --- /dev/null +++ b/hw/bsp/stm32wba/boards/stm32wba_nucleo/board.cmake @@ -0,0 +1,8 @@ +set(MCU_VARIANT stm32wba65xx) +set(JLINK_DEVICE STM32WBA65RI) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32WBA65xx + ) +endfunction() diff --git a/hw/bsp/stm32wba/boards/stm32wba_nucleo/board.h b/hw/bsp/stm32wba/boards/stm32wba_nucleo/board.h new file mode 100644 index 000000000..eb0622399 --- /dev/null +++ b/hw/bsp/stm32wba/boards/stm32wba_nucleo/board.h @@ -0,0 +1,136 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025, Dalton Caron + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + /* metadata: + name: STM32 NUCLEO-WBA65RI + url: https://www.st.com/en/evaluation-tools/nucleo-wba65ri.html + */ +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + + // LED (user LED 1) +#define LED_CLK_EN __HAL_RCC_GPIOD_CLK_ENABLE +#define LED_PORT GPIOD +#define LED_PIN GPIO_PIN_8 +#define LED_STATE_ON 1 + +// Button (user button 1) +#define BUTTON_CLK_EN __HAL_RCC_GPIOC_CLK_ENABLE +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 0 + +// USART (on STM link USB connector) +#define USART_GPIO_CLK_EN __HAL_RCC_GPIOB_CLK_ENABLE(); __HAL_RCC_GPIOA_CLK_ENABLE +#define USART_DEV USART3 +#define USART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +#define USART_TX_GPIO_PORT GPIOA +#define USART_RX_GPIO_PORT GPIOA +#define USART_GPIO_AF GPIO_AF8_USART3 +#define USART_TX_PIN GPIO_PIN_7 +#define USART_RX_PIN GPIO_PIN_5 + +// USB Pins +// These pints are only used for USB and must be in analog mode when not used. +// They are by default configured for USB operation after reset. +#define USB_DP_PORT GPIOD +#define USB_DP_PIN GPIO_PIN_6 + +#define USB_DM_PORT GPIOD +#define USB_DM_PIN GPIO_PIN_7 + +//--------------------------------------------------------------------+ +// The system clock is configured as follows: +// System Clock source = PLL (HSE, crystal) +// SYSCLK (CPU Clock) = 64 MHz +// HCLK (AXI and AHB Clocks) = 64 MHz +// AHB Prescaler = 1 +// APB1 Prescaler = 1 (APB3 Clock = 64MHz) +// APB2 Prescaler = 1 (APB1 Clock = 64MHz) +// APB7 Prescaler = 1 (APB2 Clock = 64MHz) +// HPRE5 Prescaler = 2 (AHB5 Clock = 32MHz) +// HSE Frequency (Hz) = 32 MHz +// PLL_M = 2 +// PLL_N = 8 +// PLL_P = 2 +// PLL_Q = 2 +// PLL_R = 2 +// VDD (V) = 3.3 V +// Flash Latency = 1 Wait States +//--------------------------------------------------------------------+ +static void board_system_clock_config( void ) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; + RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + ( void ) HAL_PWREx_ConfigSupply( PWR_LDO_SUPPLY ); + + // Must be in voltage scaling mode 1 for the OTG USB HS peripheral to function + ( void ) HAL_PWREx_ControlVoltageScaling( PWR_REGULATOR_VOLTAGE_SCALE1 ); + + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSEDiv = RCC_HSE_DIV1; + RCC_OscInitStruct.PLL1.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL1.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL1.PLLM = 2; + RCC_OscInitStruct.PLL1.PLLN = 8; + RCC_OscInitStruct.PLL1.PLLP = 2; + RCC_OscInitStruct.PLL1.PLLQ = 2; + RCC_OscInitStruct.PLL1.PLLR = 2; + RCC_OscInitStruct.PLL1.PLLFractional = 0; + ( void ) HAL_RCC_OscConfig( &RCC_OscInitStruct ); + + RCC_ClkInitStruct.ClockType = ( RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 + | RCC_CLOCKTYPE_PCLK7 | RCC_CLOCKTYPE_HCLK5 ); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB7CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.AHB5_PLL1_CLKDivider = RCC_SYSCLK_PLL1_DIV2; + RCC_ClkInitStruct.AHB5_HSEHSI_CLKDivider = RCC_SYSCLK_HSEHSI_DIV1; + + ( void ) HAL_RCC_ClockConfig( &RCC_ClkInitStruct, FLASH_LATENCY_1 ); + + ( void ) SystemCoreClockUpdate(); + + ( void ) HAL_ICACHE_Enable(); +} + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32wba/boards/stm32wba_nucleo/board.mk b/hw/bsp/stm32wba/boards/stm32wba_nucleo/board.mk new file mode 100644 index 000000000..dc8463ca0 --- /dev/null +++ b/hw/bsp/stm32wba/boards/stm32wba_nucleo/board.mk @@ -0,0 +1,6 @@ +MCU_VARIANT = stm32wba65xx + +CFLAGS += -DSTM32WBA65xx + +# For flash-jlink target +JLINK_DEVICE = STM32WBA65RI diff --git a/hw/bsp/stm32wba/family.c b/hw/bsp/stm32wba/family.c index bacac2fdc..923ea197c 100644 --- a/hw/bsp/stm32wba/family.c +++ b/hw/bsp/stm32wba/family.c @@ -23,19 +23,20 @@ * * This file is part of the TinyUSB stack. */ + +/* metadata: + manufacturer: STMicroelectronics +*/ + #include #include "stm32wbaxx_hal.h" #include "bsp/board_api.h" #include "board.h" - //--------------------------------------------------------------------+ - // MACRO TYPEDEF CONSTANT ENUM - //--------------------------------------------------------------------+ -#ifndef CFG_BOARD_UART_BAUDRATE -#define CFG_BOARD_UART_BAUDRATE 115200 -#endif - +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ #ifndef USART_TIMEOUT_TICKS #define USART_TIMEOUT_TICKS 1000 #endif @@ -45,189 +46,171 @@ static UART_HandleTypeDef uart_handle; //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void USB_OTG_HS_IRQHandler( void ) -{ - tud_int_handler( 0 ); +void USB_OTG_HS_IRQHandler(void) { + tud_int_handler(0); } //--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ -static void board_gpio_configuration( void ) -{ - GPIO_InitTypeDef gpio_init = { 0 }; - - USART_GPIO_CLK_EN(); - USART_CLK_EN(); - - // Configure USART TX pin - gpio_init.Pin = USART_TX_PIN; - gpio_init.Mode = GPIO_MODE_AF_PP; - gpio_init.Pull = GPIO_NOPULL; - gpio_init.Speed = GPIO_SPEED_FREQ_HIGH; - gpio_init.Alternate = USART_GPIO_AF; - HAL_GPIO_Init( USART_TX_GPIO_PORT, &gpio_init ); - - // Configure USART RX pin - gpio_init.Pin = USART_RX_PIN; - gpio_init.Mode = GPIO_MODE_AF_PP; - gpio_init.Pull = GPIO_PULLUP; - gpio_init.Speed = GPIO_SPEED_FREQ_HIGH; - gpio_init.Alternate = USART_GPIO_AF; - HAL_GPIO_Init( USART_RX_GPIO_PORT, &gpio_init ); - - // Configure the LED - LED_CLK_EN(); - gpio_init.Pin = LED_PIN; - gpio_init.Mode = GPIO_MODE_OUTPUT_PP; - gpio_init.Pull = GPIO_PULLUP; - gpio_init.Speed = GPIO_SPEED_FREQ_LOW; - gpio_init.Alternate = 0; - HAL_GPIO_Init( LED_PORT, &gpio_init ); - - // Default LED state is off - board_led_write( false ); - - // Configure the button - BUTTON_CLK_EN(); - gpio_init.Pin = BUTTON_PIN; - gpio_init.Mode = GPIO_MODE_INPUT; - gpio_init.Pull = GPIO_PULLUP; - gpio_init.Speed = GPIO_SPEED_FREQ_LOW; - gpio_init.Alternate = 0; - HAL_GPIO_Init( BUTTON_PORT, &gpio_init ); - - // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. - gpio_init.Pin = (GPIO_PIN_7 | GPIO_PIN_6); - gpio_init.Mode = GPIO_MODE_INPUT; - gpio_init.Pull = GPIO_NOPULL; - gpio_init.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init( GPIOD, &gpio_init ); +static void board_gpio_configuration(void) { + GPIO_InitTypeDef gpio_init = {0}; + + USART_GPIO_CLK_EN(); + USART_CLK_EN(); + + // Configure USART TX pin + gpio_init.Pin = USART_TX_PIN; + gpio_init.Mode = GPIO_MODE_AF_PP; + gpio_init.Pull = GPIO_NOPULL; + gpio_init.Speed = GPIO_SPEED_FREQ_HIGH; + gpio_init.Alternate = USART_GPIO_AF; + HAL_GPIO_Init(USART_TX_GPIO_PORT, &gpio_init); + + // Configure USART RX pin + gpio_init.Pin = USART_RX_PIN; + gpio_init.Mode = GPIO_MODE_AF_PP; + gpio_init.Pull = GPIO_PULLUP; + gpio_init.Speed = GPIO_SPEED_FREQ_HIGH; + gpio_init.Alternate = USART_GPIO_AF; + HAL_GPIO_Init(USART_RX_GPIO_PORT, &gpio_init); + + // Configure the LED + LED_CLK_EN(); + gpio_init.Pin = LED_PIN; + gpio_init.Mode = GPIO_MODE_OUTPUT_PP; + gpio_init.Pull = GPIO_PULLUP; + gpio_init.Speed = GPIO_SPEED_FREQ_LOW; + gpio_init.Alternate = 0; + HAL_GPIO_Init(LED_PORT, &gpio_init); + + // Default LED state is off + board_led_write(false); + + // Configure the button + BUTTON_CLK_EN(); + gpio_init.Pin = BUTTON_PIN; + gpio_init.Mode = GPIO_MODE_INPUT; + gpio_init.Pull = GPIO_PULLUP; + gpio_init.Speed = GPIO_SPEED_FREQ_LOW; + gpio_init.Alternate = 0; + HAL_GPIO_Init(BUTTON_PORT, &gpio_init); + + // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. + gpio_init.Pin = (GPIO_PIN_7 | GPIO_PIN_6); + gpio_init.Mode = GPIO_MODE_INPUT; + gpio_init.Pull = GPIO_NOPULL; + gpio_init.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIOD, &gpio_init); } -static void board_uart_configuration( void ) -{ - uart_handle = ( UART_HandleTypeDef ) { - .Instance = USART_DEV, - .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, +static void board_uart_configuration(void) { + uart_handle = ( UART_HandleTypeDef){ + .Instance = USART_DEV, + .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, .Init.WordLength = UART_WORDLENGTH_8B, - .Init.StopBits = UART_STOPBITS_1, - .Init.Parity = UART_PARITY_NONE, - .Init.HwFlowCtl = UART_HWCONTROL_NONE, - .Init.Mode = UART_MODE_TX_RX, + .Init.StopBits = UART_STOPBITS_1, + .Init.Parity = UART_PARITY_NONE, + .Init.HwFlowCtl = UART_HWCONTROL_NONE, + .Init.Mode = UART_MODE_TX_RX, .Init.OverSampling = UART_OVERSAMPLING_16 - }; - HAL_UART_Init( &uart_handle ); + }; + HAL_UART_Init(&uart_handle); } -void board_init( void ) -{ - board_system_clock_config(); - board_gpio_configuration(); - board_uart_configuration(); +void board_init(void) { + board_system_clock_config(); + board_gpio_configuration(); + board_uart_configuration(); -#ifdef USB_OTG_HS - // STM32WBA65/64/62 only has 1 USB HS port + #ifdef USB_OTG_HS + // STM32WBA65/64/62 only has 1 USB HS port - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config( SystemCoreClock / 1000 ); - #elif CFG_TUSB_OS == OPT_OS_FREERTOS - // Explicitly disable systick to prevent its ISR runs before scheduler start - SysTick->CTRL &= ~1U; + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #elif CFG_TUSB_OS == OPT_OS_FREERTOS + // Explicitly disable systick to prevent its ISR runs before scheduler start + SysTick->CTRL &= ~1U; - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority( OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); - #endif + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + #endif - // USB clock enable - __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); - __HAL_RCC_USB_OTG_HS_PHY_CLK_ENABLE(); + // USB clock enable + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + __HAL_RCC_USB_OTG_HS_PHY_CLK_ENABLE(); - // See the reference manual section 11.4.7 for the USB OTG powering sequence + // See the reference manual section 11.4.7 for the USB OTG powering sequence - // Remove the VDDUSB power isolation - PWR->SVMCR |= PWR_SVMCR_USV; + // Remove the VDDUSB power isolation + PWR->SVMCR |= PWR_SVMCR_USV; - // Enable VDD11USB supply by clearing VDD11USBDIS to 0 - PWR->VOSR &= ~PWR_VOSR_VDD11USBDIS; + // Enable VDD11USB supply by clearing VDD11USBDIS to 0 + PWR->VOSR &= ~PWR_VOSR_VDD11USBDIS; - // Enable USB OTG internal power by setting USBPWREN to 1 - PWR->VOSR |= PWR_VOSR_USBPWREN; + // Enable USB OTG internal power by setting USBPWREN to 1 + PWR->VOSR |= PWR_VOSR_USBPWREN; - // Wait for VDD11USB supply to be ready in VDD11USBRDY = 1 - while ((PWR->VOSR & PWR_VOSR_VDD11USBRDY) == 0) {} + // Wait for VDD11USB supply to be ready in VDD11USBRDY = 1 + while ((PWR->VOSR & PWR_VOSR_VDD11USBRDY) == 0) {} - // Enable USB OTG booster by setting USBBOOSTEN to 1 - PWR->VOSR |= PWR_VOSR_USBBOOSTEN; + // Enable USB OTG booster by setting USBBOOSTEN to 1 + PWR->VOSR |= PWR_VOSR_USBBOOSTEN; - // Wait for USB OTG booster to be ready in USBBOOSTRDY = 1 - while ((PWR->VOSR & PWR_VOSR_USBBOOSTRDY) == 0) {} + // Wait for USB OTG booster to be ready in USBBOOSTRDY = 1 + while ((PWR->VOSR & PWR_VOSR_USBBOOSTRDY) == 0) {} - // Enable USB power on Pwrctrl CR2 register - PWR->SVMCR |= PWR_SVMCR_USV; + // Enable USB power on Pwrctrl CR2 register + PWR->SVMCR |= PWR_SVMCR_USV; - // Set the reference clock selection (must match the clock source) - SYSCFG->OTGHSPHYCR &= ~SYSCFG_OTGHSPHYCR_CLKSEL; - SYSCFG->OTGHSPHYCR |= SYSCFG_OTGHSPHYCR_CLKSEL_0 | SYSCFG_OTGHSPHYCR_CLKSEL_1 | - SYSCFG_OTGHSPHYCR_CLKSEL_3; // 32MHz clock + // Set the reference clock selection (must match the clock source) + SYSCFG->OTGHSPHYCR &= ~SYSCFG_OTGHSPHYCR_CLKSEL; + SYSCFG->OTGHSPHYCR |= SYSCFG_OTGHSPHYCR_CLKSEL_0 | SYSCFG_OTGHSPHYCR_CLKSEL_1 | + SYSCFG_OTGHSPHYCR_CLKSEL_3;// 32MHz clock - // Configuring the SYSCFG registers OTG_HS PHY - SYSCFG->OTGHSPHYCR |= SYSCFG_OTGHSPHYCR_EN; + // Configuring the SYSCFG registers OTG_HS PHY + SYSCFG->OTGHSPHYCR |= SYSCFG_OTGHSPHYCR_EN; - // Disable VBUS sense (B device) - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + // Disable VBUS sense (B device) + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - // B-peripheral session valid override enable - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; - USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; -#endif // USB_OTG_FS + // B-peripheral session valid override enable + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; + #endif // USB_OTG_FS } -void board_led_write( bool state ) -{ - HAL_GPIO_WritePin( LED_PORT, LED_PIN, state ? LED_STATE_ON : ( 1 - LED_STATE_ON ) ); -} +void board_led_write(bool state) { HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); } -uint32_t board_button_read( void ) -{ - return HAL_GPIO_ReadPin( BUTTON_PORT, BUTTON_PIN ) == BUTTON_STATE_ACTIVE; -} +uint32_t board_button_read(void) { return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN) == BUTTON_STATE_ACTIVE; } -int board_uart_read( uint8_t *buf, int len ) -{ - ( void ) buf; - ( void ) len; - return 0; +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; } -int board_uart_write( void const *buf, int len ) -{ - ( void ) HAL_UART_Transmit( &uart_handle, ( const uint8_t * ) buf, len, USART_TIMEOUT_TICKS ); - return len; +int board_uart_write(void const *buf, int len) { + (void) HAL_UART_Transmit(&uart_handle, (const uint8_t *) buf, len, USART_TIMEOUT_TICKS); + return len; } #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; -void SysTick_Handler( void ) -{ - HAL_IncTick(); - system_ticks++; -} -uint32_t board_millis( void ) -{ - return system_ticks; +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; } + +uint32_t board_millis(void) { return system_ticks; } #endif -void HardFault_Handler( void ) -{ - asm( "bkpt 1" ); -} +void HardFault_Handler(void) { asm( "bkpt 1" ); } // Required by __libc_init_array in startup code if we are compiling using -nostdlib/-nostartfiles. -void _init( void ); -void _init( void ) -{ } +void _init(void); + +void _init(void) {} diff --git a/hw/bsp/stm32wba/family.cmake b/hw/bsp/stm32wba/family.cmake index 3f41900ea..3f42879be 100644 --- a/hw/bsp/stm32wba/family.cmake +++ b/hw/bsp/stm32wba/family.cmake @@ -4,7 +4,7 @@ set(ST_FAMILY wba) set(ST_PREFIX stm32${ST_FAMILY}xx) set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) -set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis-device-${ST_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # include board specific @@ -19,25 +19,12 @@ set(FAMILY_MCUS STM32WBA CACHE INTERNAL "") # ---------------------- # Port & Speed Selection # ---------------------- -if (NOT DEFINED RHPORT_DEVICE) - set(RHPORT_DEVICE 0) -endif () -if (NOT DEFINED RHPORT_HOST) - set(RHPORT_HOST 0) -endif () - -if (NOT DEFINED RHPORT_SPEED) - # WBA65/64/62 has built-in HS PHY - set(RHPORT_SPEED OPT_MODE_HIGH_SPEED OPT_MODE_HIGH_SPEED) -endif () -if (NOT DEFINED RHPORT_DEVICE_SPEED) - list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) -endif () -if (NOT DEFINED RHPORT_HOST_SPEED) - list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) -endif () - -cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) +set(RHPORT_DEVICE 0) +set(RHPORT_HOST 0) + +# WBA65/64/62 has built-in HS PHY +set(RHPORT_DEVICE_SPEED OPT_MODE_HIGH_SPEED) +set(RHPORT_HOST_SPEED OPT_MODE_HIGH_SPEED) #------------------------------------ # BOARD_TARGET @@ -57,7 +44,7 @@ function(add_board_target BOARD_TARGET) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${UPPERCASE_MCU_VARIANT}_FLASH_ns.ld) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${UPPERCASE_MCU_VARIANT}_FLASH_ns.ld) set(LD_FILE_Clang ${LD_FILE_GNU}) set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_ns.icf) @@ -66,15 +53,15 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_icache.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pcd.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pcd_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_ll_usb.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pcd.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pcd_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_ll_usb.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/stm32wba/family.mk b/hw/bsp/stm32wba/family.mk index 22f63609f..9b319921f 100644 --- a/hw/bsp/stm32wba/family.mk +++ b/hw/bsp/stm32wba/family.mk @@ -13,10 +13,11 @@ CFLAGS += \ CFLAGS_GCC += \ -flto \ - -nostdlib -nostartfiles \ -Wno-error=cast-align -Wno-unused-parameter -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs -Wl,--gc-sections +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + -specs=nosys.specs -specs=nano.specs -Wl,--gc-sections SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ @@ -44,14 +45,14 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # STM32WBA HAL uses uppercase MCU_VARIANT (excluding the x's) for linking and lowercase MCU_VARIANT for startup. -UPPERCASE_MCU_VARIANT = $(shell echo $(MCU_VARIANT) | sed 's/\([^x]\)/\U\1/g') +UPPERCASE_MCU_VARIANT = $(subst XX,xx,$(call to_upper,$(MCU_VARIANT))) # Startup - Manually specify lowercase version for startup file SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s # Linker -LD_FILE_GCC ?= ${ST_CMSIS}/Source/Templates/gcc/linker/${UPPERCASE_MCU_VARIANT}_FLASH_ns.ld +LD_FILE_GCC ?= ${FAMILY_PATH}/linker/${UPPERCASE_MCU_VARIANT}_FLASH_ns.ld LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash_ns.icf # flash target using on-board stlink diff --git a/hw/bsp/stm32wba/linker/STM32WBA65xx_FLASH_ns.ld b/hw/bsp/stm32wba/linker/STM32WBA65xx_FLASH_ns.ld new file mode 100644 index 000000000..bc1f2997d --- /dev/null +++ b/hw/bsp/stm32wba/linker/STM32WBA65xx_FLASH_ns.ld @@ -0,0 +1,188 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32WBA65xx Device from STM32WBA series +** 2048Kbytes FLASH +** 512Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +****************************************************************************** +** @attention +** +** Copyright (c) 2024 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20038000, LENGTH = 224K + RAM2 (xrw) : ORIGIN = 0x20078000, LENGTH = 32K + FLASH (rx) : ORIGIN = 0x08100000, LENGTH = 1024K +} + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : + { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : + { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} -- cgit v1.3.1 From ba36df6233cd1bd09f383818f10c1ccda7b9efb4 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 12 Sep 2025 11:27:31 +0700 Subject: fix warnings, update docs --- docs/reference/boards.rst | 35 +++++++++++----------- .../device/audio_4_channel_mic_freertos/src/main.c | 2 -- examples/device/audio_test_freertos/src/main.c | 2 -- examples/device/cdc_msc_freertos/src/main.c | 4 +-- examples/device/cdc_msc_freertos/src/msc_disk.c | 2 +- examples/device/midi_test_freertos/src/main.c | 2 -- .../device/uac2_speaker_fb/src/quirk_os_guessing.c | 8 ++--- examples/device/usbtmc/src/usbtmc_app.c | 4 +-- hw/bsp/at32f402_405/boards/at_start_f402/board.h | 4 +-- .../boards/at32f403a_weact_blackpill/board.h | 2 +- hw/bsp/at32f403a_407/boards/at_start_f407/board.h | 4 +-- hw/bsp/at32f435_437/boards/at_start_f435/board.h | 4 +-- hw/bsp/stm32n6/boards/stm32n6570dk/board.h | 2 +- 13 files changed, 34 insertions(+), 41 deletions(-) (limited to 'docs') diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index a930f485b..25542264c 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -28,22 +28,23 @@ max78002evkit MAX78002 EVKIT maxim https://www.analog.com/en/resources/e ============= ================ ======== ================================================================================================================= ====== Artery ------ - -============== ============== ============= ================================================== ====== -Board Name Family URL Note -============== ============== ============= ================================================== ====== -at_start_f402 AT-START-F402 at32f402_405 https://www.arterychip.com/en/product/AT32F402.jsp -at_start_f405 AT-START-F405 at32f402_405 https://www.arterychip.com/en/product/AT32F405.jsp -at_start_f403a AT-START-F403a at32f403a_407 https://www.arterychip.com/en/product/AT32F403A.jsp -at_start_f407 AT-START-F407 at32f403a_407 https://www.arterychip.com/en/product/AT32F407.jsp -at_start_f413 AT-START-F413 at32f413 https://www.arterychip.com/en/product/AT32F413.jsp -at_start_f415 AT-START-F415 at32f415 https://www.arterychip.com/en/product/AT32F415.jsp -at_start_f423 AT-START-F423 at32f423 https://www.arterychip.com/en/product/AT32F423.jsp -at_start_f425 AT-START-F425 at32f425 https://www.arterychip.com/en/product/AT32F425.jsp -at_start_f435 AT-START-F435 at32f435_437 https://www.arterychip.com/en/product/AT32F435.jsp -at_start_f437 AT-START-F437 at32f435_437 https://www.arterychip.com/en/product/AT32F437.jsp -============== ============== ============= ================================================== ====== +------ + +========================= ============================= ============= ==================================================== ====== +Board Name Family URL Note +========================= ============================= ============= ==================================================== ====== +at_start_f402 AT-START-F402 at32f402_405 https://www.arterychip.com/en/product/AT32F402.jsp +at_start_f405 AT-START-F405 at32f402_405 https://www.arterychip.com/en/product/AT32F405.jsp +at32f403a_weact_blackpill WeAct BlackPill AT32F403ACGU7 at32f403a_407 https://github.com/WeActStudio/WeActStudio.BlackPill +at_start_f403a AT-START-F403a at32f403a_407 https://www.arterychip.com/en/product/AT32F403.jsp +at_start_f407 AT-START-F407 at32f403a_407 https://www.arterychip.com/en/product/AT32F407.jsp +at_start_f413 AT-START-F413 at32f413 https://www.arterychip.com/en/product/AT32F413.jsp +at_start_f415 AT-START-F415 at32f415 https://www.arterychip.com/en/product/AT32F415.jsp +at_start_f423 AT-START-F423 at32f423 https://www.arterychip.com/en/product/AT32F423.jsp +at_start_f425 AT-START-F425 at32f425 https://www.arterychip.com/en/product/AT32F425.jsp +at_start_f435 AT-START-F435 at32f435_437 https://www.arterychip.com/en/product/AT32F435.jsp +at_start_f437 AT-START-F437 at32f435_437 https://www.arterychip.com/en/product/AT32F437.jsp +========================= ============================= ============= ==================================================== ====== Bridgetek --------- @@ -303,7 +304,7 @@ stm32u575eval STM32 U575 Eval stm32u5 https://www.s stm32u575nucleo STM32 U575 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u575zi-q.html stm32u5a5nucleo STM32 U5a5 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u5a5zj-q.html stm32wb55nucleo STM32 P-NUCLEO-WB55 stm32wb https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html -stm32wba65nucleo STM32 NUCLEO-WBA65RI stm32wba https://www.st.com/en/evaluation-tools/nucleo-wba65ri.html +stm32wba_nucleo STM32 NUCLEO-WBA65RI stm32wba https://www.st.com/en/evaluation-tools/nucleo-wba65ri.html =================== ================================= ========= ================================================================= ====== Sunxi diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index 9c76380a2..643b2f259 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -476,13 +476,11 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p //--------------------------------------------------------------------+ void led_blinking_task(void *param) { (void) param; - static uint32_t start_ms = 0; static bool led_state = false; while (1) { // Blink every interval ms vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); - start_ms += blink_interval_ms; board_led_write(led_state); led_state = 1 - led_state;// toggle diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index b2bed295f..ea06af0e2 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -470,13 +470,11 @@ bool tud_audio_set_itf_close_ep_cb(uint8_t rhport, tusb_control_request_t const //--------------------------------------------------------------------+ void led_blinking_task(void *param) { (void) param; - static uint32_t start_ms = 0; static bool led_state = false; while (1) { // Blink every interval ms vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); - start_ms += blink_interval_ms; board_led_write(led_state); led_state = 1 - led_state;// toggle diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 09ccc9bf3..b20d162ab 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -229,13 +229,11 @@ void tud_cdc_rx_cb(uint8_t itf) { //--------------------------------------------------------------------+ void led_blinking_task(void* param) { (void) param; - static uint32_t start_ms = 0; - static bool led_state = false; + static bool led_state = false; while (1) { // Blink every interval ms vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); - start_ms += blink_interval_ms; board_led_write(led_state); led_state = 1 - led_state; // toggle diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 3602c991d..849712e6a 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -150,7 +150,7 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = }; #if CFG_EXAMPLE_MSC_ASYNC_IO -void msc_disk_init() { +void msc_disk_init(void) { #if configSUPPORT_STATIC_ALLOCATION io_queue = xQueueCreateStatic(1, sizeof(io_ops_t), io_queue_buf, &io_queue_static); diff --git a/examples/device/midi_test_freertos/src/main.c b/examples/device/midi_test_freertos/src/main.c index 3e406d38d..c18ad6ada 100644 --- a/examples/device/midi_test_freertos/src/main.c +++ b/examples/device/midi_test_freertos/src/main.c @@ -225,13 +225,11 @@ void midi_task(void* param) { //--------------------------------------------------------------------+ void led_blinking_task(void* param) { (void) param; - static uint32_t start_ms = 0; static bool led_state = false; while (1) { // Blink every interval ms vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); - start_ms += blink_interval_ms; board_led_write(led_state); led_state = 1 - led_state; // toggle diff --git a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c b/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c index 965bbd6cf..92b9ab6ee 100644 --- a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c +++ b/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c @@ -29,12 +29,12 @@ static tusb_desc_type_t desc_req_buf[2]; static int desc_req_idx = 0; // Place at the start of tud_descriptor_device_cb() -void quirk_os_guessing_desc_device_cb() { +void quirk_os_guessing_desc_device_cb(void) { desc_req_idx = 0; } // Place at the start of tud_descriptor_configuration_cb() -void quirk_os_guessing_desc_configuration_cb() { +void quirk_os_guessing_desc_configuration_cb(void) { // Skip redundant request if (desc_req_idx == 0 || (desc_req_idx == 1 && desc_req_buf[0] != TUSB_DESC_CONFIGURATION)) { desc_req_buf[desc_req_idx++] = TUSB_DESC_CONFIGURATION; @@ -42,7 +42,7 @@ void quirk_os_guessing_desc_configuration_cb() { } // Place at the start of tud_descriptor_bos_cb() -void quirk_os_guessing_desc_bos_cb() { +void quirk_os_guessing_desc_bos_cb(void) { // Skip redundant request if (desc_req_idx == 0 || (desc_req_idx == 1 && desc_req_buf[0] != TUSB_DESC_BOS)) { desc_req_buf[desc_req_idx++] = TUSB_DESC_BOS; @@ -50,7 +50,7 @@ void quirk_os_guessing_desc_bos_cb() { } // Place at the start of tud_descriptor_string_cb() -void quirk_os_guessing_desc_string_cb() { +void quirk_os_guessing_desc_string_cb(void) { // Skip redundant request if (desc_req_idx == 0 || (desc_req_idx == 1 && desc_req_buf[0] != TUSB_DESC_STRING)) { desc_req_buf[desc_req_idx++] = TUSB_DESC_STRING; diff --git a/examples/device/usbtmc/src/usbtmc_app.c b/examples/device/usbtmc/src/usbtmc_app.c index fb25982c7..e738f1008 100644 --- a/examples/device/usbtmc/src/usbtmc_app.c +++ b/examples/device/usbtmc/src/usbtmc_app.c @@ -99,7 +99,7 @@ usbtmc_response_capabilities_488_t const * #else usbtmc_response_capabilities_t const * #endif -tud_usbtmc_get_capabilities_cb() +tud_usbtmc_get_capabilities_cb(void) { return &tud_usbtmc_app_capabilities; } @@ -161,7 +161,7 @@ bool tud_usbtmc_msg_data_cb(void *data, size_t len, bool transfer_complete) return true; } -bool tud_usbtmc_msgBulkIn_complete_cb() +bool tud_usbtmc_msgBulkIn_complete_cb(void) { if((buffer_tx_ix == buffer_len) || idnQuery) // done { diff --git a/hw/bsp/at32f402_405/boards/at_start_f402/board.h b/hw/bsp/at32f402_405/boards/at_start_f402/board.h index b11b7a80f..01b78f101 100644 --- a/hw/bsp/at32f402_405/boards/at_start_f402/board.h +++ b/hw/bsp/at32f402_405/boards/at_start_f402/board.h @@ -25,8 +25,8 @@ */ /* metadata: - name: AT-START-F405 - url: https://www.arterychip.com/en/product/AT32F405.jsp + name: AT-START-F402 + url: https://www.arterychip.com/en/product/AT32F402.jsp */ #ifndef BOARD_H_ diff --git a/hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.h b/hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.h index 005c5aed6..2dac9bc56 100644 --- a/hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.h +++ b/hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.h @@ -25,7 +25,7 @@ */ /* metadata: - name: WeAct Studio BlackPill AT32F403ACGU7 + name: WeAct BlackPill AT32F403ACGU7 url: https://github.com/WeActStudio/WeActStudio.BlackPill */ diff --git a/hw/bsp/at32f403a_407/boards/at_start_f407/board.h b/hw/bsp/at32f403a_407/boards/at_start_f407/board.h index 753fece10..c490d7ed6 100644 --- a/hw/bsp/at32f403a_407/boards/at_start_f407/board.h +++ b/hw/bsp/at32f403a_407/boards/at_start_f407/board.h @@ -25,8 +25,8 @@ */ /* metadata: - name: AT-START-F403a - url: https://www.arterychip.com/en/product/AT32F403.jsp + name: AT-START-F407 + url: https://www.arterychip.com/en/product/AT32F407.jsp */ #ifndef BOARD_H_ diff --git a/hw/bsp/at32f435_437/boards/at_start_f435/board.h b/hw/bsp/at32f435_437/boards/at_start_f435/board.h index 3522e759a..25fd81450 100644 --- a/hw/bsp/at32f435_437/boards/at_start_f435/board.h +++ b/hw/bsp/at32f435_437/boards/at_start_f435/board.h @@ -25,8 +25,8 @@ */ /* metadata: - name: AT-START-F437 - url: https://www.arterychip.com/en/product/AT32F437.jsp + name: AT-START-F435 + url: https://www.arterychip.com/en/product/AT32F435.jsp */ #ifndef BOARD_H_ diff --git a/hw/bsp/stm32n6/boards/stm32n6570dk/board.h b/hw/bsp/stm32n6/boards/stm32n6570dk/board.h index 96e430c7a..a3d945f76 100644 --- a/hw/bsp/stm32n6/boards/stm32n6570dk/board.h +++ b/hw/bsp/stm32n6/boards/stm32n6570dk/board.h @@ -25,7 +25,7 @@ */ /* metadata: - name: STM32N6570-DK + name: STM32 N6570-DK url: https://www.st.com/en/evaluation-tools/stm32n6570-dk.html */ -- cgit v1.3.1