From a19db3bdd2071ceff3775a6ebb1a4d280423ac28 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 10 Nov 2019 20:07:43 +0700 Subject: added board nrf52840 mdk dongle --- docs/boards.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/boards.md b/docs/boards.md index 608cbf4eb..9470ab2a1 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -21,6 +21,7 @@ This code base already had supported for a handful of following boards - [Adafruit Feather nRF52840 Express](https://www.adafruit.com/product/4062) - [Adafruit Circuit Playground Bluefruit](https://www.adafruit.com/product/4333) +- [Maker Diary nRF52840 MDK Dongle](https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle) - [Nordic nRF52840 Development Kit (aka pca10056)](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) - [Nordic nRF52840 Dongle (aka pca10059)](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle) @@ -45,7 +46,7 @@ This code base already had supported for a handful of following boards ### ST STM32 -- Adafruit Feather STM32F405 +- [Adafruit Feather STM32F405](https://www.adafruit.com/product/4382) - [Micro Python PyBoard v1.1](https://store.micropython.org/product/PYBv1.1) - [STM32 L035c8 Discovery](https://www.st.com/en/evaluation-tools/32l0538discovery.html) - [STM32 F070rb Nucleo](https://www.st.com/en/evaluation-tools/nucleo-f070rb.html) -- cgit v1.3.1 From d65bc34bfeb3dab8fb79a94cec7b3b8f5a579525 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Nov 2019 00:11:49 +0700 Subject: added and tested nRF52833DK (pca10100) --- README.md | 2 +- docs/boards.md | 1 + examples/device/cdc_msc/src/main.c | 2 +- hw/bsp/pca10100/board.mk | 55 +++++++++ hw/bsp/pca10100/pca10100.c | 223 +++++++++++++++++++++++++++++++++++++ 5 files changed, 281 insertions(+), 2 deletions(-) create mode 100644 hw/bsp/pca10100/board.mk create mode 100644 hw/bsp/pca10100/pca10100.c (limited to 'docs') diff --git a/README.md b/README.md index 02fb8257c..2e61c75e5 100644 --- a/README.md +++ b/README.md @@ -25,7 +25,7 @@ TinyUSB is an open-source cross-platform USB Host/Device stack for embedded syst The stack supports the following MCUs -- **Nordic:** nRF52840 +- **Nordic:** nRF52840, nRF52833 - **NXP:** LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx - **MicroChip:** SAMD21, SAMD51 (device only) - **Sony:** CXD56 diff --git a/docs/boards.md b/docs/boards.md index 9470ab2a1..3ca4d458b 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -24,6 +24,7 @@ This code base already had supported for a handful of following boards - [Maker Diary nRF52840 MDK Dongle](https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle) - [Nordic nRF52840 Development Kit (aka pca10056)](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) - [Nordic nRF52840 Dongle (aka pca10059)](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle) +- [Nordic nRF52833 Development Kit (aka pca10100)](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK) ### NXP LPC diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index e1b9ab113..a407e2ddd 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -136,7 +136,7 @@ void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) if ( dtr && rts ) { // print initial message when connected - tud_cdc_write_str("\r\nTinyUSB CDC MSC HID device example\r\n"); + tud_cdc_write_str("\r\nTinyUSB CDC MSC device example\r\n"); } } diff --git a/hw/bsp/pca10100/board.mk b/hw/bsp/pca10100/board.mk new file mode 100644 index 000000000..97d9aa428 --- /dev/null +++ b/hw/bsp/pca10100/board.mk @@ -0,0 +1,55 @@ +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -DNRF52833_XXAA \ + -DCONFIG_GPIO_AS_PINRESET \ + -DCFG_TUSB_MCU=OPT_MCU_NRF5X + +# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter + +# due to tusb_hal_nrf_power_event +GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) +ifeq ($(shell expr $(GCCVERSION) \>= 8), 1) +CFLAGS += -Wno-error=cast-function-type +endif + +# All source paths should be relative to the top level. +LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld + +LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk + +SRC_C += \ + hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ + hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \ + hw/mcu/nordic/nrfx/mdk/system_nrf52833.c \ + +INC += \ + $(TOP)/hw/mcu/nordic/cmsis/Include \ + $(TOP)/hw/mcu/nordic \ + $(TOP)/hw/mcu/nordic/nrfx \ + $(TOP)/hw/mcu/nordic/nrfx/mdk \ + $(TOP)/hw/mcu/nordic/nrfx/hal \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ + +SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52833.S + +ASFLAGS += -D__HEAP_SIZE=0 + +# For TinyUSB port source +VENDOR = nordic +CHIP_FAMILY = nrf5x + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = nRF52833_XXAA +JLINK_IF = swd + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/pca10100/pca10100.c b/hw/bsp/pca10100/pca10100.c new file mode 100644 index 000000000..b9cc9fc36 --- /dev/null +++ b/hw/bsp/pca10100/pca10100.c @@ -0,0 +1,223 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" + +#include "nrfx.h" +#include "nrfx/hal/nrf_gpio.h" +#include "nrfx/drivers/include/nrfx_power.h" +#include "nrfx/drivers/include/nrfx_uarte.h" + +#ifdef SOFTDEVICE_PRESENT +#include "nrf_sdm.h" +#include "nrf_soc.h" +#endif + +/*------------------------------------------------------------------*/ +/* MACRO TYPEDEF CONSTANT ENUM + *------------------------------------------------------------------*/ +#define LED_PIN 13 +#define LED_STATE_ON 0 + +#define BUTTON_PIN 11 +#define BUTTON_STATE_ACTIVE 0 + +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0); +//static void uart_handler(nrfx_uart_event_t const * p_event, void* p_context); + +// tinyusb function that handles power event (detected, ready, removed) +// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. +extern void tusb_hal_nrf_power_event(uint32_t event); + +void board_init(void) +{ + // stop LF clock just in case we jump from application without reset + NRF_CLOCK->TASKS_LFCLKSTOP = 1UL; + + // Use Internal OSC to compatible with all boards + NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC; + NRF_CLOCK->TASKS_LFCLKSTART = 1UL; + + // LED + nrf_gpio_cfg_output(LED_PIN); + board_led_write(false); + + // Button + nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock/1000); +#endif + + // UART + nrfx_uarte_config_t uart_cfg = + { + .pseltxd = UART_TX_PIN, + .pselrxd = UART_RX_PIN, + .pselcts = NRF_UARTE_PSEL_DISCONNECTED, + .pselrts = NRF_UARTE_PSEL_DISCONNECTED, + .p_context = NULL, + .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE + .interrupt_priority = 7, + .hal_cfg = { + .hwfc = NRF_UARTE_HWFC_DISABLED, + .parity = NRF_UARTE_PARITY_EXCLUDED, + } + }; + + nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); + +#if TUSB_OPT_DEVICE_ENABLED + // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice + // 2 is highest for application + NVIC_SetPriority(USBD_IRQn, 2); + + // USB power may already be ready at this time -> no event generated + // We need to invoke the handler based on the status initially + uint32_t usb_reg; + +#ifdef SOFTDEVICE_PRESENT + uint8_t sd_en = false; + sd_softdevice_is_enabled(&sd_en); + + if ( sd_en ) { + sd_power_usbdetected_enable(true); + sd_power_usbpwrrdy_enable(true); + sd_power_usbremoved_enable(true); + + sd_power_usbregstatus_get(&usb_reg); + }else +#endif + { + // Power module init + const nrfx_power_config_t pwr_cfg = { 0 }; + nrfx_power_init(&pwr_cfg); + + // Register tusb function as USB power handler + // cause cast-function-type warning + const nrfx_power_usbevt_config_t config = { .handler = ((nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event) }; + nrfx_power_usbevt_init(&config); + + nrfx_power_usbevt_enable(); + + usb_reg = NRF_POWER->USBREGSTATUS; + } + + if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED); + if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN); +} + +//static void uart_handler(nrfx_uart_event_t const * p_event, void* p_context) +//{ +// +//} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +// return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0; +} + +int board_uart_write(void const * buf, int len) +{ + return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +#ifdef SOFTDEVICE_PRESENT +// process SOC event from SD +uint32_t proc_soc(void) +{ + uint32_t soc_evt; + uint32_t err = sd_evt_get(&soc_evt); + + if (NRF_SUCCESS == err) + { + /*------------- usb power event handler -------------*/ + int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED: + (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY : + (soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1; + + if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt); + } + + return err; +} + +uint32_t proc_ble(void) +{ + // do nothing with ble + return NRF_ERROR_NOT_FOUND; +} + +void SD_EVT_IRQHandler(void) +{ + // process BLE and SOC until there is no more events + while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) ) + { + + } +} + +void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) +{ + (void) id; + (void) pc; + (void) info; +} +#endif -- cgit v1.3.1 From 470d827f13e22dea083266b96c7bd724a08b0b65 Mon Sep 17 00:00:00 2001 From: Sean Cross Date: Mon, 14 Oct 2019 11:08:27 +0800 Subject: docs: porting: remove invalid information and fix typo It is no longer the case that boards need to be added to this file. Signed-off-by: Sean Cross --- docs/porting.md | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'docs') diff --git a/docs/porting.md b/docs/porting.md index a38ff0192..7ed21d75a 100644 --- a/docs/porting.md +++ b/docs/porting.md @@ -25,8 +25,6 @@ Unless, you've read ahead, this will fail miserably. Now, lets get it to fail le One of the first things to change is the `-DCFG_TUSB_MCU` cflag in the `board.mk` file. This is used to tell TinyUSB what platform is being built. So, add an entry to `src/tusb_option.h` and update the CFLAG to match. -Also, add an entry for the board in `hw/bsp/board.h`. The CFLAG is auto-added. - Update `board.mk`'s VENDOR and CHIP_FAMILY values when creating the directory for the struct files. Duplicate one of the other sources from `src/portable` into `src/portable//` and delete all of the implementation internals. We'll cover what everything there does later. For now, get it compiling. ## Implementation @@ -104,7 +102,7 @@ Calls to this look like: dcd_event_setup_received(0, setup, true); -As before with `dcd_event_bus_signal` the first argument is the USB peripheral number and the third is true to signal its being called from an interrup handler. The middle argument is byte array of length 8 with the contents of the SETUP packet. It can be stack allocated because it is copied into the queue. +As before with `dcd_event_bus_signal` the first argument is the USB peripheral number and the third is true to signal its being called from an interrupt handler. The middle argument is byte array of length 8 with the contents of the SETUP packet. It can be stack allocated because it is copied into the queue. #### Endpoints -- cgit v1.3.1 From 00a571fc3837db8276b1ee0e80019545d39e5c36 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 22 Nov 2019 15:37:23 +0700 Subject: doc update --- README.md | 7 +++++-- docs/boards.md | 8 ++++++++ 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'docs') diff --git a/README.md b/README.md index 2e61c75e5..588526ff7 100644 --- a/README.md +++ b/README.md @@ -25,9 +25,12 @@ TinyUSB is an open-source cross-platform USB Host/Device stack for embedded syst The stack supports the following MCUs -- **Nordic:** nRF52840, nRF52833 -- **NXP:** LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx +- **Tomu:** [valentyusb](https://github.com/im-tomu/valentyusb) (eptri) - **MicroChip:** SAMD21, SAMD51 (device only) +- **Nordic:** nRF52840, nRF52833 +- **NXP:** + - LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx + - iMX RT Series: RT1064 - **Sony:** CXD56 - **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 (device only) diff --git a/docs/boards.md b/docs/boards.md index 3ca4d458b..caf4ef6ff 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -9,6 +9,10 @@ The board support code is only used for self-contained examples and testing. It This code base already had supported for a handful of following boards +## Tomu + +- [Fomu](https://www.crowdsupply.com/sutajio-kosagi/fomu) + ### MicroChip SAMD - [Adafruit Circuit Playground Express](https://www.adafruit.com/product/3333) @@ -26,6 +30,10 @@ This code base already had supported for a handful of following boards - [Nordic nRF52840 Dongle (aka pca10059)](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle) - [Nordic nRF52833 Development Kit (aka pca10100)](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK) +### NXP iMX RT + +- [iMX RT1064 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1064-evk-i.mx-rt1064-evaluation-kit:MIMXRT1064-EVK) + ### NXP LPC - [LPCXpresso 11u37](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso-board-for-lpc11u37h:OM13074) -- cgit v1.3.1 From cc9b6b93c84f62c86e5436b3feb69ae472668bb8 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 22 Nov 2019 17:42:52 +0700 Subject: update doc for RT1060 evk --- README.md | 2 +- docs/boards.md | 3 ++- docs/porting.md | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) (limited to 'docs') diff --git a/README.md b/README.md index 588526ff7..469cb5660 100644 --- a/README.md +++ b/README.md @@ -30,7 +30,7 @@ The stack supports the following MCUs - **Nordic:** nRF52840, nRF52833 - **NXP:** - LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx - - iMX RT Series: RT1064 + - iMX RT Series: RT1060, RT1064 - **Sony:** CXD56 - **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 (device only) diff --git a/docs/boards.md b/docs/boards.md index caf4ef6ff..d310b1c23 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -32,7 +32,8 @@ This code base already had supported for a handful of following boards ### NXP iMX RT -- [iMX RT1064 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1064-evk-i.mx-rt1064-evaluation-kit:MIMXRT1064-EVK) +- [MIMX RT1064 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1064-evk-i.mx-rt1064-evaluation-kit:MIMXRT1064-EVK) +- [MIMX RT1060 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1060-evk-i.mx-rt1060-evaluation-kit:MIMXRT1060-EVK) ### NXP LPC diff --git a/docs/porting.md b/docs/porting.md index 7ed21d75a..deb1b9efb 100644 --- a/docs/porting.md +++ b/docs/porting.md @@ -1,6 +1,6 @@ # Porting -TinyUSB is designed to be a universal USB protocol stack for low-cost 32 bit microcontrollers. It +TinyUSB is designed to be a universal USB protocol stack for microcontrollers. It handles most of the high level USB protocol and relies on the microcontroller's USB peripheral for data transactions on different endpoints. Porting is the process of adding low-level support for the rest of the common stack. Once the low-level is implemented, it is very easy to add USB support -- cgit v1.3.1 From 4ecb07afc5012cbc93664cc1a57b15e2fe0aff20 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 23 Nov 2019 00:19:53 +0700 Subject: added MIMX RT1052 Evaluation Kit --- README.md | 4 +- docs/boards.md | 11 +- hw/bsp/mimxrt1050_evkb/board.h | 34 +++ hw/bsp/mimxrt1050_evkb/board.mk | 55 +++++ .../evkbimxrt1050_flexspi_nor_config.c | 55 +++++ .../evkbimxrt1050_flexspi_nor_config.h | 269 +++++++++++++++++++++ hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c | 184 ++++++++++++++ hw/bsp/mimxrt1060_evk/board.mk | 5 +- hw/bsp/mimxrt1064_evk/board.mk | 5 +- 9 files changed, 607 insertions(+), 15 deletions(-) create mode 100644 hw/bsp/mimxrt1050_evkb/board.h create mode 100644 hw/bsp/mimxrt1050_evkb/board.mk create mode 100644 hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c create mode 100644 hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h create mode 100644 hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c (limited to 'docs') diff --git a/README.md b/README.md index 469cb5660..3401dc904 100644 --- a/README.md +++ b/README.md @@ -25,14 +25,14 @@ TinyUSB is an open-source cross-platform USB Host/Device stack for embedded syst The stack supports the following MCUs -- **Tomu:** [valentyusb](https://github.com/im-tomu/valentyusb) (eptri) - **MicroChip:** SAMD21, SAMD51 (device only) - **Nordic:** nRF52840, nRF52833 - **NXP:** - LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx - - iMX RT Series: RT1060, RT1064 + - iMX RT Series: RT1052, RT1062, RT1064 - **Sony:** CXD56 - **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 (device only) +- **Tomu:** [valentyusb](https://github.com/im-tomu/valentyusb) (eptri) [Here is the list of supported Boards](docs/boards.md) that can be used with provided examples. diff --git a/docs/boards.md b/docs/boards.md index d310b1c23..de1e6bbd5 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -9,10 +9,6 @@ The board support code is only used for self-contained examples and testing. It This code base already had supported for a handful of following boards -## Tomu - -- [Fomu](https://www.crowdsupply.com/sutajio-kosagi/fomu) - ### MicroChip SAMD - [Adafruit Circuit Playground Express](https://www.adafruit.com/product/3333) @@ -32,8 +28,9 @@ This code base already had supported for a handful of following boards ### NXP iMX RT -- [MIMX RT1064 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1064-evk-i.mx-rt1064-evaluation-kit:MIMXRT1064-EVK) +- [MIMX RT1052 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK) - [MIMX RT1060 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1060-evk-i.mx-rt1060-evaluation-kit:MIMXRT1060-EVK) +- [MIMX RT1064 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1064-evk-i.mx-rt1064-evaluation-kit:MIMXRT1064-EVK) ### NXP LPC @@ -70,6 +67,10 @@ This code base already had supported for a handful of following boards - [STM32 F767zi Nucleo](https://www.st.com/en/evaluation-tools/nucleo-f767zi.html) - [STM32 H743zi Nucleo](https://www.st.com/en/evaluation-tools/nucleo-h743zi.html) +### Tomu + +- [Fomu](https://www.crowdsupply.com/sutajio-kosagi/fomu) + ## Add your own board If you don't possess any of supported board above. Don't worry you can easily implemented your own one by following this guide as long as the mcu is supported. diff --git a/hw/bsp/mimxrt1050_evkb/board.h b/hw/bsp/mimxrt1050_evkb/board.h new file mode 100644 index 000000000..3f660ac7d --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/board.h @@ -0,0 +1,34 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x4000000U) + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/mimxrt1050_evkb/board.mk b/hw/bsp/mimxrt1050_evkb/board.mk new file mode 100644 index 000000000..b455b0606 --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/board.mk @@ -0,0 +1,55 @@ +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -D__ARMVFP__=0 -D__ARMFPV5__=0\ + -DCPU_MIMXRT1052DVL6B \ + -DXIP_EXTERNAL_FLASH=1 \ + -DXIP_BOOT_HEADER_ENABLE=1 \ + -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \ + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + +# mcu driver cause following warnings +#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1052 + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MIMXRT1052xxxxx_flexspi_nor.ld + +SRC_C += \ + $(MCU_DIR)/system_MIMXRT1052.c \ + $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_common.c \ + $(MCU_DIR)/drivers/fsl_lpuart.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(MCU_DIR)/project_template \ + +SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1052.S + +# For TinyUSB port source +VENDOR = nxp +CHIP_FAMILY = transdimension + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1052xxx6B +JLINK_IF = swd + +# flash by copying bin file to DAP Mass Storage +flash: $(BUILD)/$(BOARD)-firmware.bin + cp $< /media/$(USER)/RT1050-EVK/ diff --git a/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c b/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c new file mode 100644 index 000000000..af6eabc8e --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c @@ -0,0 +1,55 @@ +/* + * Copyright 2017 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkbimxrt1050_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t hyperflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + .columnAddressWidth = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .controllerMiscOption = + (1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) | + (1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable), + .sflashPadType = kSerialFlash_8Pads, + .serialClkFreq = kFlexSpiSerialClk_133MHz, + .sflashA1Size = 64u * 1024u * 1024u, + .dataValidTime = {16u, 16u}, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_DDR, FLEXSPI_8PAD, 0xA0, RADDR_DDR, FLEXSPI_8PAD, 0x18), + FLEXSPI_LUT_SEQ(CADDR_DDR, FLEXSPI_8PAD, 0x10, DUMMY_DDR, FLEXSPI_8PAD, 0x06), + FLEXSPI_LUT_SEQ(READ_DDR, FLEXSPI_8PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0), + }, + }, + .pageSize = 512u, + .sectorSize = 256u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = true, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h b/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h new file mode 100644 index 000000000..fe40e7ed7 --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h @@ -0,0 +1,269 @@ +/* + * Copyright (c) 2016, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ +#define __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ + +#include +#include +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_133MHz = 7, + kFlexSpiSerialClk_166MHz = 8, + kFlexSpiSerialClk_200MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c b/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c new file mode 100644 index 000000000..a21dcdbfc --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c @@ -0,0 +1,184 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_iomuxc.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIO1 +#define LED_PIN 9 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT GPIO5 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX + +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + // Init clock + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) +// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + IOMUXC_SetPinMux( LED_PINMUX, 0U); + IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); + + // UART + IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); + IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); + IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); + IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U)); + + //------------- USB0 -------------// + // Clock + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); + CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); + + USBPHY_Type* usb_phy = USBPHY1; + + // Enable PHY support for Low speed device + LS via FS Hub + usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + usb_phy->PWD = 0; + + // TX Timing + uint32_t phytx = usb_phy->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + usb_phy->TX = phytx; + + // USB1 +// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U); +// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U); +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_OTG1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +void USB_OTG2_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_isr(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_isr(1); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/mimxrt1060_evk/board.mk b/hw/bsp/mimxrt1060_evk/board.mk index 89f5a0f3e..d42da8cbe 100644 --- a/hw/bsp/mimxrt1060_evk/board.mk +++ b/hw/bsp/mimxrt1060_evk/board.mk @@ -50,9 +50,6 @@ FREERTOS_PORT = ARM_CM7 JLINK_DEVICE = MIMXRT1062xxx6A JLINK_IF = swd -# flash using pyocd -#flash: $(BUILD)/$(BOARD)-firmware.hex -# pyocd flash -t mimxrt1050_quadspi $< - +# flash by copying bin file to DAP Mass Storage flash: $(BUILD)/$(BOARD)-firmware.bin cp $< /media/$(USER)/RT1060-EVK/ diff --git a/hw/bsp/mimxrt1064_evk/board.mk b/hw/bsp/mimxrt1064_evk/board.mk index d991168ef..7bb0c6378 100644 --- a/hw/bsp/mimxrt1064_evk/board.mk +++ b/hw/bsp/mimxrt1064_evk/board.mk @@ -50,9 +50,6 @@ FREERTOS_PORT = ARM_CM7 JLINK_DEVICE = MIMXRT1064xxx6A JLINK_IF = swd -# flash using pyocd -#flash: $(BUILD)/$(BOARD)-firmware.hex -# pyocd flash -t mimxrt1050_quadspi $< - +# flash by copying bin file to DAP Mass Storage flash: $(BUILD)/$(BOARD)-firmware.bin cp $< /media/$(USER)/RT1064-EVK/ -- cgit v1.3.1 From d76eb8d6595860584640d26b1056bf47f31cb134 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 23 Nov 2019 00:51:43 +0700 Subject: doc update --- README.md | 2 +- docs/boards.md | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'docs') diff --git a/README.md b/README.md index 3401dc904..d983dadd9 100644 --- a/README.md +++ b/README.md @@ -29,7 +29,7 @@ The stack supports the following MCUs - **Nordic:** nRF52840, nRF52833 - **NXP:** - LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx - - iMX RT Series: RT1052, RT1062, RT1064 + - iMX RT Series: RT1021, RT1052, RT1062, RT1064 - **Sony:** CXD56 - **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 (device only) - **Tomu:** [valentyusb](https://github.com/im-tomu/valentyusb) (eptri) diff --git a/docs/boards.md b/docs/boards.md index de1e6bbd5..305f06fe8 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -28,7 +28,8 @@ This code base already had supported for a handful of following boards ### NXP iMX RT -- [MIMX RT1052 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK) +- [MIMX RT1020 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1020-evaluation-kit:MIMXRT1020-EVK) +- [MIMX RT1050 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK) - [MIMX RT1060 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1060-evk-i.mx-rt1060-evaluation-kit:MIMXRT1060-EVK) - [MIMX RT1064 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1064-evk-i.mx-rt1064-evaluation-kit:MIMXRT1064-EVK) -- cgit v1.3.1 From 9758f3e461f031b88d630dfb89757d2cbea809d5 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 23 Nov 2019 01:11:37 +0700 Subject: doc update --- README.md | 2 +- docs/boards.md | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/README.md b/README.md index d983dadd9..8226ead54 100644 --- a/README.md +++ b/README.md @@ -29,7 +29,7 @@ The stack supports the following MCUs - **Nordic:** nRF52840, nRF52833 - **NXP:** - LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx - - iMX RT Series: RT1021, RT1052, RT1062, RT1064 + - iMX RT Series: RT1015, RT1021, RT1052, RT1062, RT1064 - **Sony:** CXD56 - **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 (device only) - **Tomu:** [valentyusb](https://github.com/im-tomu/valentyusb) (eptri) diff --git a/docs/boards.md b/docs/boards.md index 305f06fe8..391d40a8c 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -28,6 +28,7 @@ This code base already had supported for a handful of following boards ### NXP iMX RT +- [MIMX RT1015 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1015-evaluation-kit:MIMXRT1015-EVK) - [MIMX RT1020 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1020-evaluation-kit:MIMXRT1020-EVK) - [MIMX RT1050 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK) - [MIMX RT1060 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1060-evk-i.mx-rt1060-evaluation-kit:MIMXRT1060-EVK) -- cgit v1.3.1 From 2379ce8d6576f32cfd44b92b59e08c0dd24303ff Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 23 Nov 2019 21:59:28 +0700 Subject: update doc, RT1011 verified to work, thanks to @arturo182 --- README.md | 2 +- docs/boards.md | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'docs') diff --git a/README.md b/README.md index 8226ead54..1700be447 100644 --- a/README.md +++ b/README.md @@ -29,7 +29,7 @@ The stack supports the following MCUs - **Nordic:** nRF52840, nRF52833 - **NXP:** - LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx - - iMX RT Series: RT1015, RT1021, RT1052, RT1062, RT1064 + - iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064 - **Sony:** CXD56 - **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 (device only) - **Tomu:** [valentyusb](https://github.com/im-tomu/valentyusb) (eptri) diff --git a/docs/boards.md b/docs/boards.md index 391d40a8c..7006aae5d 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -28,6 +28,7 @@ This code base already had supported for a handful of following boards ### NXP iMX RT +- [MIMX RT1010 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1010-evaluation-kit:MIMXRT1010-EVK) - [MIMX RT1015 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1015-evaluation-kit:MIMXRT1015-EVK) - [MIMX RT1020 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1020-evaluation-kit:MIMXRT1020-EVK) - [MIMX RT1050 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK) -- cgit v1.3.1