From bc8c8df3163bd41d0220746618f6495425344028 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 28 Apr 2024 00:29:19 +0200 Subject: Build STM32F7 with single-point FPU. --- .../build_system/cmake/cpu/cortex-m7-fpsp.cmake | 25 ++++++++++++++++++++ examples/build_system/make/cpu/cortex-m7-fpsp.mk | 27 ++++++++++++++++++++++ 2 files changed, 52 insertions(+) create mode 100644 examples/build_system/cmake/cpu/cortex-m7-fpsp.cmake create mode 100644 examples/build_system/make/cpu/cortex-m7-fpsp.mk (limited to 'examples/build_system') diff --git a/examples/build_system/cmake/cpu/cortex-m7-fpsp.cmake b/examples/build_system/cmake/cpu/cortex-m7-fpsp.cmake new file mode 100644 index 000000000..b10f00fc2 --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m7-fpsp.cmake @@ -0,0 +1,25 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m7 + -mfloat-abi=hard + -mfpu=fpv5-sp-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM7 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=cortex-m7 + -mfpu=fpv5-sp-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM7 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m7 + --fpu VFPv5_sp + ) + set(FREERTOS_PORT IAR_ARM_CM7 CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/make/cpu/cortex-m7-fpsp.mk b/examples/build_system/make/cpu/cortex-m7-fpsp.mk new file mode 100644 index 000000000..cd42c6fb8 --- /dev/null +++ b/examples/build_system/make/cpu/cortex-m7-fpsp.mk @@ -0,0 +1,27 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-sp-d16 \ + +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + --target=arm-none-eabi \ + -mcpu=cortex-m7 \ + -mfpu=fpv5-sp-d16 \ + +else ifeq ($(TOOLCHAIN),iar) + CFLAGS += \ + --cpu cortex-m7 \ + --fpu VFPv5_sp \ + + ASFLAGS += \ + --cpu cortex-m7 \ + --fpu VFPv5_sp \ + +else + $(error "TOOLCHAIN is not supported") +endif + +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1 -- cgit v1.3.1 From ea3f1d39e8bfc82facc7b3e503d7c71f9119de2b Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 May 2024 13:29:29 +0700 Subject: add cmake for pi zero (renamed from pi zero_w), build but the flash size seem wrong (only 24 bytes for text) --- .clang-format | 6 -- examples/build_system/cmake/cpu/arm1176jzf-s.cmake | 19 ++++ examples/build_system/make/cpu/arm1176.mk | 9 -- examples/build_system/make/cpu/arm1176jzf-s.mk | 9 ++ .../boards/raspberrypi_zero/board.cmake | 8 ++ .../broadcom_32bit/boards/raspberrypi_zero/board.h | 38 ++++++++ .../boards/raspberrypi_zero/board.mk | 5 + .../boards/raspberrypi_zero_w/board.h | 38 -------- .../boards/raspberrypi_zero_w/board.mk | 5 - hw/bsp/broadcom_32bit/family.c | 11 +++ hw/bsp/broadcom_32bit/family.cmake | 107 +++++++++++++++++++++ hw/bsp/broadcom_32bit/family.mk | 5 +- src/common/tusb_fifo.h | 12 +-- src/common/tusb_mcu.h | 2 +- src/common/tusb_verify.h | 3 +- 15 files changed, 206 insertions(+), 71 deletions(-) delete mode 100644 .clang-format create mode 100644 examples/build_system/cmake/cpu/arm1176jzf-s.cmake delete mode 100644 examples/build_system/make/cpu/arm1176.mk create mode 100644 examples/build_system/make/cpu/arm1176jzf-s.mk create mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake create mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h create mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.mk delete mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h delete mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk create mode 100644 hw/bsp/broadcom_32bit/family.cmake (limited to 'examples/build_system') diff --git a/.clang-format b/.clang-format deleted file mode 100644 index 4369c29fe..000000000 --- a/.clang-format +++ /dev/null @@ -1,6 +0,0 @@ ---- -BreakBeforeBraces: Linux -ColumnLimit: '200' -ReflowComments: 'true' - -... diff --git a/examples/build_system/cmake/cpu/arm1176jzf-s.cmake b/examples/build_system/cmake/cpu/arm1176jzf-s.cmake new file mode 100644 index 000000000..11bb52f30 --- /dev/null +++ b/examples/build_system/cmake/cpu/arm1176jzf-s.cmake @@ -0,0 +1,19 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mcpu=arm1176jzf-s + ) + # set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=arm1176jzf-s + -mfpu=none + -mfloat-abi=soft + ) + #set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + +endif () diff --git a/examples/build_system/make/cpu/arm1176.mk b/examples/build_system/make/cpu/arm1176.mk deleted file mode 100644 index 022ccf7ad..000000000 --- a/examples/build_system/make/cpu/arm1176.mk +++ /dev/null @@ -1,9 +0,0 @@ -ifeq ($(TOOLCHAIN),gcc) - CFLAGS += \ - -mcpu=arm1176jzf-s \ - -else ifeq ($(TOOLCHAIN),iar) - #CFLAGS += --cpu cortex-a53 - #ASFLAGS += --cpu cortex-a53 - -endif diff --git a/examples/build_system/make/cpu/arm1176jzf-s.mk b/examples/build_system/make/cpu/arm1176jzf-s.mk new file mode 100644 index 000000000..022ccf7ad --- /dev/null +++ b/examples/build_system/make/cpu/arm1176jzf-s.mk @@ -0,0 +1,9 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mcpu=arm1176jzf-s \ + +else ifeq ($(TOOLCHAIN),iar) + #CFLAGS += --cpu cortex-a53 + #ASFLAGS += --cpu cortex-a53 + +endif diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake new file mode 100644 index 000000000..2b8cc19e0 --- /dev/null +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake @@ -0,0 +1,8 @@ +set(CMAKE_SYSTEM_PROCESSOR arm1176jzf-s CACHE INTERNAL "System Processor") +#set(SUFFIX "") + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + BCM_VERSION=2835 + ) +endfunction() diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h new file mode 100644 index 000000000..84a106346 --- /dev/null +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h @@ -0,0 +1,38 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.mk b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.mk new file mode 100644 index 000000000..7a248ed24 --- /dev/null +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.mk @@ -0,0 +1,5 @@ +CPU_CORE = arm1176jzf-s +CFLAGS += -DBCM_VERSION=2835 \ + -DCFG_TUSB_MCU=OPT_MCU_BCM2835 + +SUFFIX = diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h deleted file mode 100644 index 84a106346..000000000 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk deleted file mode 100644 index 052033230..000000000 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -CPU_CORE = arm1176 -CFLAGS += -DBCM_VERSION=2835 \ - -DCFG_TUSB_MCU=OPT_MCU_BCM2835 - -SUFFIX = diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c index 664b4dcaf..626565e34 100644 --- a/hw/bsp/broadcom_32bit/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -27,6 +27,13 @@ #include "bsp/board_api.h" #include "board.h" +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-qual" +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + #include "broadcom/cpu.h" #include "broadcom/gpio.h" #include "broadcom/interrupts.h" @@ -34,6 +41,10 @@ #include "broadcom/caches.h" #include "broadcom/vcmailbox.h" +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + // LED #define LED_PIN 18 #define LED_STATE_ON 1 diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake new file mode 100644 index 000000000..223c85e48 --- /dev/null +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -0,0 +1,107 @@ +include_guard() + +set(MCU_DIR ${TOP}/hw/mcu/broadcom) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS BCM2835 CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${MCU_DIR}/broadcom/link.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${MCU_DIR}/broadcom/boot.s) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${MCU_DIR}/broadcom/gen/interrupt_handlers.c + ${MCU_DIR}/broadcom/gpio.c + ${MCU_DIR}/broadcom/interrupts.c + ${MCU_DIR}/broadcom/mmu.c + ${MCU_DIR}/broadcom/caches.c + ${MCU_DIR}/broadcom/vcmailbox.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_compile_options(${BOARD_TARGET} PUBLIC + -O0 + -ffreestanding + -mgeneral-regs-only + -fno-exceptions + -std=c17 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MCU_DIR} + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostdlib -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_BCM2835 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/broadcom_32bit/family.mk b/hw/bsp/broadcom_32bit/family.mk index cf68e21ee..e15bd93f7 100644 --- a/hw/bsp/broadcom_32bit/family.mk +++ b/hw/bsp/broadcom_32bit/family.mk @@ -1,5 +1,4 @@ MCU_DIR = hw/mcu/broadcom -DEPS_SUBMODULES += $(MCU_DIR) include $(TOP)/$(BOARD_PATH)/board.mk @@ -27,15 +26,13 @@ SRC_C += \ $(MCU_DIR)/broadcom/caches.c \ $(MCU_DIR)/broadcom/vcmailbox.c -SKIP_NANOLIB = 1 - LD_FILE = $(MCU_DIR)/broadcom/link$(SUFFIX).ld INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/$(MCU_DIR) -SRC_S += $(MCU_DIR)/broadcom/boot$(SUFFIX).S +SRC_S += $(MCU_DIR)/broadcom/boot$(SUFFIX).s $(BUILD)/kernel$(SUFFIX).img: $(BUILD)/$(PROJECT).elf $(OBJCOPY) -O binary $^ $@ diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 2d9f5e667..0de576601 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -145,13 +145,13 @@ bool tu_fifo_clear(tu_fifo_t *f); bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_size, bool overwritable); #if OSAL_MUTEX_REQUIRED - TU_ATTR_ALWAYS_INLINE static inline - void tu_fifo_config_mutex(tu_fifo_t *f, osal_mutex_t wr_mutex, osal_mutex_t rd_mutex) { - f->mutex_wr = wr_mutex; - f->mutex_rd = rd_mutex; - } +TU_ATTR_ALWAYS_INLINE static inline +void tu_fifo_config_mutex(tu_fifo_t *f, osal_mutex_t wr_mutex, osal_mutex_t rd_mutex) { + f->mutex_wr = wr_mutex; + f->mutex_rd = rd_mutex; +} #else - #define tu_fifo_config_mutex(_f, _wr_mutex, _rd_mutex) +#define tu_fifo_config_mutex(_f, _wr_mutex, _rd_mutex) #endif bool tu_fifo_write (tu_fifo_t* f, void const * p_data); diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 5a567f2d5..8d58be2a1 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -430,7 +430,7 @@ #endif #if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED -#warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" + #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 0a9549c99..dde0550d3 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -78,8 +78,7 @@ // Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7, M33. M55 #if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) || \ defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) - #define TU_BREAKPOINT() do \ - { \ + #define TU_BREAKPOINT() do { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \ } while(0) -- cgit v1.3.1 From 980f5992c8bc9b66e13cd409ae782a588053ec3e Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 May 2024 16:57:50 +0700 Subject: add cmake for broadcom 64-bit, like 32-bit it compiles but text is only 8 bytes (incorrect) --- examples/build_system/cmake/cpu/cortex-a53.cmake | 17 ++++ examples/build_system/cmake/cpu/cortex-a72.cmake | 17 ++++ .../build_system/cmake/toolchain/aarch64_gcc.cmake | 21 ++++ .../boards/raspberrypi_cm4/board.cmake | 5 + .../boards/raspberrypi_zero2/board.cmake | 5 + .../boards/raspberrypi_zero2/board.h | 38 +++++++ .../boards/raspberrypi_zero2/board.mk | 3 + .../boards/raspberrypi_zero2w/board.h | 38 ------- .../boards/raspberrypi_zero2w/board.mk | 3 - hw/bsp/broadcom_64bit/family.c | 11 +++ hw/bsp/broadcom_64bit/family.cmake | 110 +++++++++++++++++++++ hw/bsp/broadcom_64bit/family.mk | 6 +- 12 files changed, 228 insertions(+), 46 deletions(-) create mode 100644 examples/build_system/cmake/cpu/cortex-a53.cmake create mode 100644 examples/build_system/cmake/cpu/cortex-a72.cmake create mode 100644 examples/build_system/cmake/toolchain/aarch64_gcc.cmake create mode 100644 hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.cmake create mode 100644 hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.cmake create mode 100644 hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h create mode 100644 hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.mk delete mode 100644 hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h delete mode 100644 hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk create mode 100644 hw/bsp/broadcom_64bit/family.cmake (limited to 'examples/build_system') diff --git a/examples/build_system/cmake/cpu/cortex-a53.cmake b/examples/build_system/cmake/cpu/cortex-a53.cmake new file mode 100644 index 000000000..dde8c0a0c --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-a53.cmake @@ -0,0 +1,17 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mcpu=cortex-a53 + ) + # set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=cortex-a53 + ) + #set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + +endif () diff --git a/examples/build_system/cmake/cpu/cortex-a72.cmake b/examples/build_system/cmake/cpu/cortex-a72.cmake new file mode 100644 index 000000000..a44324234 --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-a72.cmake @@ -0,0 +1,17 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mcpu=cortex-a72 + ) + # set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=cortex-a72 + ) + #set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + +endif () diff --git a/examples/build_system/cmake/toolchain/aarch64_gcc.cmake b/examples/build_system/cmake/toolchain/aarch64_gcc.cmake new file mode 100644 index 000000000..2d30a0b71 --- /dev/null +++ b/examples/build_system/cmake/toolchain/aarch64_gcc.cmake @@ -0,0 +1,21 @@ +if (NOT DEFINED CMAKE_C_COMPILER) + set(CMAKE_C_COMPILER "aarch64-none-elf-gcc") +endif () + +if (NOT DEFINED CMAKE_CXX_COMPILER) + set(CMAKE_CXX_COMPILER "aarch64-none-elf-g++") +endif () + +set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) +set(CMAKE_SIZE "aarch64-none-elf-size" CACHE FILEPATH "") +set(CMAKE_OBJCOPY "aarch64-none-elf-objcopy" CACHE FILEPATH "") +set(CMAKE_OBJDUMP "aarch64-none-elf-objdump" CACHE FILEPATH "") + +include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) + +get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) +if (IS_IN_TRY_COMPILE) + set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") + set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") + cmake_print_variables(CMAKE_C_LINK_FLAGS) +endif () diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.cmake b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.cmake new file mode 100644 index 000000000..919068f1d --- /dev/null +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.cmake @@ -0,0 +1,5 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-a72 CACHE INTERNAL "System Processor") +set(BCM_VERSION 2711) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.cmake b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.cmake new file mode 100644 index 000000000..85f84e947 --- /dev/null +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.cmake @@ -0,0 +1,5 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-a53 CACHE INTERNAL "System Processor") +set(BCM_VERSION 2837) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h new file mode 100644 index 000000000..84a106346 --- /dev/null +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h @@ -0,0 +1,38 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.mk b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.mk new file mode 100644 index 000000000..da3fe17bc --- /dev/null +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.mk @@ -0,0 +1,3 @@ +CPU_CORE = cortex-a53 +CFLAGS += -DBCM_VERSION=2837 \ + -DCFG_TUSB_MCU=OPT_MCU_BCM2837 diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h deleted file mode 100644 index 84a106346..000000000 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk deleted file mode 100644 index da3fe17bc..000000000 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk +++ /dev/null @@ -1,3 +0,0 @@ -CPU_CORE = cortex-a53 -CFLAGS += -DBCM_VERSION=2837 \ - -DCFG_TUSB_MCU=OPT_MCU_BCM2837 diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c index 664b4dcaf..626565e34 100644 --- a/hw/bsp/broadcom_64bit/family.c +++ b/hw/bsp/broadcom_64bit/family.c @@ -27,6 +27,13 @@ #include "bsp/board_api.h" #include "board.h" +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-qual" +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + #include "broadcom/cpu.h" #include "broadcom/gpio.h" #include "broadcom/interrupts.h" @@ -34,6 +41,10 @@ #include "broadcom/caches.h" #include "broadcom/vcmailbox.h" +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + // LED #define LED_PIN 18 #define LED_STATE_ON 1 diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake new file mode 100644 index 000000000..b534e29be --- /dev/null +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -0,0 +1,110 @@ +include_guard() + +set(MCU_DIR ${TOP}/hw/mcu/broadcom) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/aarch64_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS BCM2711 BCM2835 CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${MCU_DIR}/broadcom/link8.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${MCU_DIR}/broadcom/boot8.s) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${MCU_DIR}/broadcom/gen/interrupt_handlers.c + ${MCU_DIR}/broadcom/gpio.c + ${MCU_DIR}/broadcom/interrupts.c + ${MCU_DIR}/broadcom/mmu.c + ${MCU_DIR}/broadcom/caches.c + ${MCU_DIR}/broadcom/vcmailbox.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_compile_options(${BOARD_TARGET} PUBLIC + -O0 + -ffreestanding + -mgeneral-regs-only + -fno-exceptions + -std=c17 + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BCM_VERSION=${BCM_VERSION} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MCU_DIR} + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostdlib -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_BCM${BCM_VERSION} ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/broadcom_64bit/family.mk b/hw/bsp/broadcom_64bit/family.mk index 97af6d64a..80eff1d36 100644 --- a/hw/bsp/broadcom_64bit/family.mk +++ b/hw/bsp/broadcom_64bit/family.mk @@ -1,6 +1,4 @@ MCU_DIR = hw/mcu/broadcom -DEPS_SUBMODULES += $(MCU_DIR) - include $(TOP)/$(BOARD_PATH)/board.mk CFLAGS += \ @@ -26,8 +24,6 @@ SRC_C += \ $(MCU_DIR)/broadcom/caches.c \ $(MCU_DIR)/broadcom/vcmailbox.c -SKIP_NANOLIB = 1 - LD_FILE = $(MCU_DIR)/broadcom/link8.ld INC += \ @@ -35,7 +31,7 @@ INC += \ $(TOP)/$(MCU_DIR) \ $(TOP)/lib/CMSIS_5/CMSIS/Core_A/Include -SRC_S += $(MCU_DIR)/broadcom/boot8.S +SRC_S += $(MCU_DIR)/broadcom/boot8.s $(BUILD)/kernel8.img: $(BUILD)/$(PROJECT).elf $(OBJCOPY) -O binary $^ $@ -- cgit v1.3.1 From c020a0190d5f22c0f761ce0a5ec4a6e35e4d0662 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 4 May 2024 12:36:40 +0700 Subject: add cmake for f1c100s --- examples/build_system/cmake/cpu/arm1176jzf-s.cmake | 2 + examples/build_system/cmake/cpu/arm926ej-s.cmake | 21 ++++ examples/build_system/make/cpu/arm926ej-s.mk | 9 ++ hw/bsp/f1c100s/board.h | 1 - hw/bsp/f1c100s/board.mk | 52 --------- hw/bsp/f1c100s/boards/f1c100s/board.cmake | 3 + hw/bsp/f1c100s/boards/f1c100s/board.h | 6 + hw/bsp/f1c100s/boards/f1c100s/board.mk | 1 + hw/bsp/f1c100s/f1c100s.c | 130 --------------------- hw/bsp/f1c100s/family.c | 126 ++++++++++++++++++++ hw/bsp/f1c100s/family.cmake | 114 ++++++++++++++++++ hw/bsp/f1c100s/family.mk | 58 +++++++++ src/portable/sunxi/dcd_sunxi_musb.c | 14 ++- 13 files changed, 348 insertions(+), 189 deletions(-) create mode 100644 examples/build_system/cmake/cpu/arm926ej-s.cmake create mode 100644 examples/build_system/make/cpu/arm926ej-s.mk delete mode 100644 hw/bsp/f1c100s/board.h delete mode 100644 hw/bsp/f1c100s/board.mk create mode 100644 hw/bsp/f1c100s/boards/f1c100s/board.cmake create mode 100644 hw/bsp/f1c100s/boards/f1c100s/board.h create mode 100644 hw/bsp/f1c100s/boards/f1c100s/board.mk delete mode 100644 hw/bsp/f1c100s/f1c100s.c create mode 100644 hw/bsp/f1c100s/family.c create mode 100644 hw/bsp/f1c100s/family.cmake create mode 100644 hw/bsp/f1c100s/family.mk (limited to 'examples/build_system') diff --git a/examples/build_system/cmake/cpu/arm1176jzf-s.cmake b/examples/build_system/cmake/cpu/arm1176jzf-s.cmake index 11bb52f30..8029e3987 100644 --- a/examples/build_system/cmake/cpu/arm1176jzf-s.cmake +++ b/examples/build_system/cmake/cpu/arm1176jzf-s.cmake @@ -1,6 +1,7 @@ if (TOOLCHAIN STREQUAL "gcc") set(TOOLCHAIN_COMMON_FLAGS -mcpu=arm1176jzf-s + -ffreestanding ) # set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") @@ -10,6 +11,7 @@ elseif (TOOLCHAIN STREQUAL "clang") -mcpu=arm1176jzf-s -mfpu=none -mfloat-abi=soft + -ffreestanding ) #set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") diff --git a/examples/build_system/cmake/cpu/arm926ej-s.cmake b/examples/build_system/cmake/cpu/arm926ej-s.cmake new file mode 100644 index 000000000..c19b9f8a8 --- /dev/null +++ b/examples/build_system/cmake/cpu/arm926ej-s.cmake @@ -0,0 +1,21 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mcpu=arm926ej-s + -ffreestanding + ) + # set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=arm926ej-s + -mfpu=none + -mfloat-abi=soft + -ffreestanding + ) + #set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + +endif () diff --git a/examples/build_system/make/cpu/arm926ej-s.mk b/examples/build_system/make/cpu/arm926ej-s.mk new file mode 100644 index 000000000..5b84f514f --- /dev/null +++ b/examples/build_system/make/cpu/arm926ej-s.mk @@ -0,0 +1,9 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mcpu=arm926ej-s \ + +else ifeq ($(TOOLCHAIN),iar) + #CFLAGS += --cpu cortex-a53 + #ASFLAGS += --cpu cortex-a53 + +endif diff --git a/hw/bsp/f1c100s/board.h b/hw/bsp/f1c100s/board.h deleted file mode 100644 index 0ef9a1700..000000000 --- a/hw/bsp/f1c100s/board.h +++ /dev/null @@ -1 +0,0 @@ -// Nothing valuable here diff --git a/hw/bsp/f1c100s/board.mk b/hw/bsp/f1c100s/board.mk deleted file mode 100644 index 3596e5414..000000000 --- a/hw/bsp/f1c100s/board.mk +++ /dev/null @@ -1,52 +0,0 @@ -MCU_DIR = hw/mcu/allwinner/f1c100s -DEPS_SUBMODULES += hw/mcu/allwinner -DEFINES += -D__ARM32_ARCH__=5 -D__ARM926EJS__ - -CFLAGS += \ - -ffreestanding \ - -std=gnu99 \ - -march=armv5te \ - -mtune=arm926ej-s \ - -mfloat-abi=soft \ - -marm \ - -mno-thumb-interwork \ - -Wno-unused-parameter \ - -Wno-float-equal \ - -DCFG_TUSB_MCU=OPT_MCU_F1C100S \ - -Wno-error=cast-align \ - -Wno-error=address-of-packed-member \ - $(DEFINES) - -LD_FILE = hw/mcu/allwinner/f1c100s/f1c100s.ld -# TODO may skip nanolib -LDFLAGS += -nostdlib -lgcc -specs=nosys.specs -specs=nano.specs - -SRC_C += \ - src/portable/sunxi/dcd_sunxi_musb.c \ - $(MCU_DIR)/machine/sys-uart.c \ - $(MCU_DIR)/machine/exception.c \ - $(MCU_DIR)/machine/sys-clock.c \ - $(MCU_DIR)/machine/sys-copyself.c \ - $(MCU_DIR)/machine/sys-dram.c \ - $(MCU_DIR)/machine/sys-mmu.c \ - $(MCU_DIR)/machine/sys-spi-flash.c \ - $(MCU_DIR)/machine/f1c100s-intc.c \ - $(MCU_DIR)/lib/malloc.c \ - $(MCU_DIR)/lib/printf.c - -SRC_S += \ - $(MCU_DIR)/machine/start.S \ - $(MCU_DIR)/lib/memcpy.S \ - $(MCU_DIR)/lib/memset.S - -INC += \ - $(TOP)/$(MCU_DIR)/include \ - $(TOP)/$(BOARD_PATH) - -# flash target using xfel -flash: flash-xfel - -exec: $(BUILD)/$(PROJECT).bin - xfel ddr - xfel write 0x80000000 $< - xfel exec 0x80000000 diff --git a/hw/bsp/f1c100s/boards/f1c100s/board.cmake b/hw/bsp/f1c100s/boards/f1c100s/board.cmake new file mode 100644 index 000000000..98ed56c57 --- /dev/null +++ b/hw/bsp/f1c100s/boards/f1c100s/board.cmake @@ -0,0 +1,3 @@ +function(update_board TARGET) + # nothing to do +endfunction() diff --git a/hw/bsp/f1c100s/boards/f1c100s/board.h b/hw/bsp/f1c100s/boards/f1c100s/board.h new file mode 100644 index 000000000..3b56a3a57 --- /dev/null +++ b/hw/bsp/f1c100s/boards/f1c100s/board.h @@ -0,0 +1,6 @@ +#ifndef BOARD_H +#define BOARD_H + +// Nothing valuable here + +#endif diff --git a/hw/bsp/f1c100s/boards/f1c100s/board.mk b/hw/bsp/f1c100s/boards/f1c100s/board.mk new file mode 100644 index 000000000..be830bd8c --- /dev/null +++ b/hw/bsp/f1c100s/boards/f1c100s/board.mk @@ -0,0 +1 @@ +# nothing to do diff --git a/hw/bsp/f1c100s/f1c100s.c b/hw/bsp/f1c100s/f1c100s.c deleted file mode 100644 index 272b756f2..000000000 --- a/hw/bsp/f1c100s/f1c100s.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include -#include -#include -#include -#include "bsp/board_api.h" -#include "board.h" - -extern void sys_uart_putc(char c); - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -static void timer_init(void); - -void board_init(void) -{ - arch_local_irq_disable(); - do_init_mem_pool(); - f1c100s_intc_init(); - timer_init(); - printf("Timer INIT done\n"); - arch_local_irq_enable(); -} - -// No LED, no button -void board_led_write(bool state) -{ - -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - int txsize = len; - while (txsize--) { - sys_uart_putc(*(uint8_t const*)buf); - buf++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -uint32_t board_millis(void) -{ - return system_ticks; -} - -static void timer_handler(void) -{ - volatile uint32_t *temp_addr = (uint32_t *)(0x01C20C00 + 0x04); - - /* clear timer */ - *temp_addr |= 0x01; - - system_ticks++; -} - -static void timer_init(void) { - uint32_t temp; - volatile uint32_t *temp_addr; - - /* reload value */ - temp = 12000000 / 1000; - temp_addr = (uint32_t *)(0x01C20C00 + 0x14); - *temp_addr = temp; - - /* continuous | /2 | 24Mhz | reload*/ - temp = (0x00 << 7) | (0x01 << 4) | (0x01 << 2) | (0x00 << 1); - temp_addr = (uint32_t *)(0x01C20C00 + 0x10); - *temp_addr &= 0xffffff00; - *temp_addr |= temp; - - /* open timer irq */ - temp = 0x01 << 0; - temp_addr = (uint32_t *)(0x01C20C00); - *temp_addr |= temp; - - /* set init value */ - temp_addr = (uint32_t *)(0x01C20C00 + 0x18); - *temp_addr = 0; - - /* begin run timer */ - temp = 0x01 << 0; - temp_addr = (uint32_t *)(0x01C20C00 + 0x10); - *temp_addr |= temp; - - f1c100s_intc_set_isr(F1C100S_IRQ_TIMER0, timer_handler); - f1c100s_intc_enable_irq(F1C100S_IRQ_TIMER0); -} -#else -static void timer_init(void) { } -#endif diff --git a/hw/bsp/f1c100s/family.c b/hw/bsp/f1c100s/family.c new file mode 100644 index 000000000..6df4a0ed8 --- /dev/null +++ b/hw/bsp/f1c100s/family.c @@ -0,0 +1,126 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include +#include +#include +#include +#include "bsp/board_api.h" +#include "board.h" + +extern void sys_uart_putc(char c); + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +static void timer_init(void); + +void board_init(void) { + arch_local_irq_disable(); + do_init_mem_pool(); + f1c100s_intc_init(); + timer_init(); + printf("Timer INIT done\n"); + arch_local_irq_enable(); +} + +// No LED, no button +void board_led_write(bool state) { + (void) state; +} + +uint32_t board_button_read(void) { + return 0; +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + int txsize = len; + while (txsize--) { + sys_uart_putc(*(uint8_t const*) buf); + buf++; + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +uint32_t board_millis(void) { + return system_ticks; +} + +static void timer_handler(void) { + volatile uint32_t* temp_addr = (uint32_t*) (0x01C20C00 + 0x04); + + /* clear timer */ + *temp_addr |= 0x01; + + system_ticks++; +} + +static void timer_init(void) { + uint32_t temp; + volatile uint32_t* temp_addr; + + /* reload value */ + temp = 12000000 / 1000; + temp_addr = (uint32_t*) (0x01C20C00 + 0x14); + *temp_addr = temp; + + /* continuous | /2 | 24Mhz | reload*/ + temp = (0x00 << 7) | (0x01 << 4) | (0x01 << 2) | (0x00 << 1); + temp_addr = (uint32_t*) (0x01C20C00 + 0x10); + *temp_addr &= 0xffffff00; + *temp_addr |= temp; + + /* open timer irq */ + temp = 0x01 << 0; + temp_addr = (uint32_t*) (0x01C20C00); + *temp_addr |= temp; + + /* set init value */ + temp_addr = (uint32_t*) (0x01C20C00 + 0x18); + *temp_addr = 0; + + /* begin run timer */ + temp = 0x01 << 0; + temp_addr = (uint32_t*) (0x01C20C00 + 0x10); + *temp_addr |= temp; + + f1c100s_intc_set_isr(F1C100S_IRQ_TIMER0, timer_handler); + f1c100s_intc_enable_irq(F1C100S_IRQ_TIMER0); +} + +#else +static void timer_init(void) { } +#endif diff --git a/hw/bsp/f1c100s/family.cmake b/hw/bsp/f1c100s/family.cmake new file mode 100644 index 000000000..0903a0143 --- /dev/null +++ b/hw/bsp/f1c100s/family.cmake @@ -0,0 +1,114 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/allwinner/f1c100s) + +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR arm926ej-s CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS F1C100S CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # LD_FILE and STARTUP_FILE can be defined in board.cmake + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${SDK_DIR}/f1c100s.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_DIR}/machine/start.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/lib/malloc.c + ${SDK_DIR}/lib/printf.c + ${SDK_DIR}/lib/memcpy.S + ${SDK_DIR}/lib/memset.S + ${SDK_DIR}/machine/sys-uart.c + ${SDK_DIR}/machine/exception.c + ${SDK_DIR}/machine/sys-clock.c + ${SDK_DIR}/machine/sys-copyself.c + ${SDK_DIR}/machine/sys-dram.c + ${SDK_DIR}/machine/sys-mmu.c + ${SDK_DIR}/machine/sys-spi-flash.c + ${SDK_DIR}/machine/f1c100s-intc.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + __ARM32_ARCH__=5 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/include + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -lgcc + --specs=nosys.specs --specs=nano.specs + "LINKER:--defsym=__bss_end__=__bss_end" + "LINKER:--defsym=__bss_start__=__bss_start" + "LINKER:--defsym=end=__bss_end" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_F1C100S ${RTOS}) + target_sources(${TARGET}-tinyusb PRIVATE + ${TOP}/src/portable/sunxi/dcd_sunxi_musb.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/f1c100s/family.mk b/hw/bsp/f1c100s/family.mk new file mode 100644 index 000000000..be416e72e --- /dev/null +++ b/hw/bsp/f1c100s/family.mk @@ -0,0 +1,58 @@ +SDK_DIR = hw/mcu/allwinner/f1c100s + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= arm926ej-s + +#CFLAGS += \ +# -march=armv5te \ +# -mtune=arm926ej-s \ +# -mfloat-abi=soft \ +# -marm \ + +CFLAGS += \ + -ffreestanding \ + -std=gnu99 \ + -mno-thumb-interwork \ + -D__ARM32_ARCH__=5 \ + -D__ARM926EJS__ \ + -Wno-float-equal \ + -Wno-unused-parameter \ + -DCFG_TUSB_MCU=OPT_MCU_F1C100S \ + -Wno-error=array-bounds \ + +LD_FILE = ${SDK_DIR}/f1c100s.ld + +# TODO may skip nanolib +LDFLAGS += \ + -nostdlib -lgcc \ + --specs=nosys.specs --specs=nano.specs \ + +SRC_C += \ + src/portable/sunxi/dcd_sunxi_musb.c \ + ${SDK_DIR}/machine/sys-uart.c \ + ${SDK_DIR}/machine/exception.c \ + ${SDK_DIR}/machine/sys-clock.c \ + ${SDK_DIR}/machine/sys-copyself.c \ + ${SDK_DIR}/machine/sys-dram.c \ + ${SDK_DIR}/machine/sys-mmu.c \ + ${SDK_DIR}/machine/sys-spi-flash.c \ + ${SDK_DIR}/machine/f1c100s-intc.c \ + ${SDK_DIR}/lib/malloc.c \ + ${SDK_DIR}/lib/printf.c + +SRC_S += \ + ${SDK_DIR}/machine/start.S \ + ${SDK_DIR}/lib/memcpy.S \ + ${SDK_DIR}/lib/memset.S + +INC += \ + $(TOP)/${SDK_DIR}/include \ + $(TOP)/$(BOARD_PATH) + +# flash target using xfel +flash: flash-xfel + +exec: $(BUILD)/$(PROJECT).bin + xfel ddr + xfel write 0x80000000 $< + xfel exec 0x80000000 diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index 6cc1975a8..6f36ad441 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -35,7 +35,9 @@ #include #include #include "musb_def.h" -#include "bsp/board.h" + +//#include "bsp/board_api.h" +extern uint32_t board_millis(void); // TODO remove typedef uint32_t u32; typedef uint16_t u16; @@ -58,7 +60,7 @@ typedef struct TU_ATTR_PACKED typedef struct { - tusb_control_request_t setup_packet; + CFG_TUD_MEM_ALIGN tusb_control_request_t setup_packet; uint16_t remaining_ctrl; /* The number of bytes remaining in data stage of control transfer. */ int8_t status_out; pipe_state_t pipe0; @@ -350,7 +352,7 @@ static void USBC_INT_DisableRxEp(u8 ep_index) * INTERNAL FUNCTION DECLARATION *------------------------------------------------------------------*/ -static dcd_data_t _dcd; +CFG_TUD_MEM_ALIGN static dcd_data_t _dcd; static inline free_block_t *find_containing_block(free_block_t *beg, free_block_t *end, uint_fast16_t addr) { @@ -560,7 +562,7 @@ static void pipe_read_write_packet_ff(tu_fifo_t *f, volatile void *fifo, unsigne static void process_setup_packet(uint8_t rhport) { - uint32_t *p = (uint32_t*)&_dcd.setup_packet; + uint32_t *p = (uint32_t*)(uintptr_t) &_dcd.setup_packet; p[0] = USBC_Readl(USBC_REG_EPFIFO0(USBC0_BASE)); p[1] = USBC_Readl(USBC_REG_EPFIFO0(USBC0_BASE)); @@ -594,7 +596,7 @@ static bool handle_xfer_in(uint_fast8_t ep_addr) if (len) { volatile void* addr = (volatile void*)(USBC_REG_EPFIFO1(USBC0_BASE) + (epnum_minus1 << 2)); if (_dcd.pipe_buf_is_fifo[TUSB_DIR_IN] & TU_BIT(epnum_minus1)) { - pipe_read_write_packet_ff((tu_fifo_t *)buf, addr, len, TUSB_DIR_IN); + pipe_read_write_packet_ff((tu_fifo_t *)(uintptr_t) buf, addr, len, TUSB_DIR_IN); } else { pipe_write_packet(buf, addr, len); pipe->buf = buf + len; @@ -622,7 +624,7 @@ static bool handle_xfer_out(uint_fast8_t ep_addr) if (len) { volatile void* addr = (volatile void*)(USBC_REG_EPFIFO1(USBC0_BASE) + (epnum_minus1 << 2)); if (_dcd.pipe_buf_is_fifo[TUSB_DIR_OUT] & TU_BIT(epnum_minus1)) { - pipe_read_write_packet_ff((tu_fifo_t *)buf, addr, len, TUSB_DIR_OUT); + pipe_read_write_packet_ff((tu_fifo_t *)(uintptr_t )buf, addr, len, TUSB_DIR_OUT); } else { pipe_read_packet(buf, addr, len); pipe->buf = buf + len; -- cgit v1.3.1 From ba6babf570752a28379aab51d9c27e7b9efe872d Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Thu, 9 May 2024 20:43:46 +0700 Subject: Rework ci (#2631) * add name field to usbd_class_driver_t * ci: use set matrix py script * add riscv32 and cmake support for ch32v307, fomu, gd32vf103 * update build_cmake.py to take --family --board --toolchain * separate hil test to its own workflow * move esp32 board into separated hil json * add make build to ci * remov build_make.py * build.py support esp32 board * setup toolchain support esp-idf * fix missing click * merge family in matrix build to reduce jobs * skip cifuzz since it still has issue with get_deps and click --- .github/actions/prepare_build/action.yml | 30 +++ .github/actions/setup_toolchain/action.yml | 31 +++ .../actions/setup_toolchain/download/action.yml | 29 ++ .github/workflows/build_aarch64.yml | 70 ----- .github/workflows/build_arm.yml | 57 ---- .github/workflows/build_cmake.yml | 295 ++++----------------- .github/workflows/build_esp.yml | 19 +- .github/workflows/build_family.yml | 64 +++++ .github/workflows/build_iar.yml | 4 +- .github/workflows/build_renesas.yml | 6 +- .github/workflows/build_riscv.yml | 71 ----- .github/workflows/build_win_mac.yml | 6 +- .github/workflows/ci_set_matrix.py | 51 ++++ .github/workflows/cifuzz.yml | 3 + .github/workflows/codeql-buildscript.sh | 3 +- .github/workflows/hil_test.yml | 125 +++++++++ .github/workflows/pre-commit.yml | 1 + .idea/cmake.xml | 8 +- examples/build_system/cmake/cpu/rv32i-ilp32.cmake | 19 ++ .../build_system/cmake/cpu/rv32imac-ilp32.cmake | 18 ++ .../build_system/cmake/toolchain/riscv_gcc.cmake | 21 ++ examples/build_system/make/cpu/rv32i-ilp32.mk | 13 + examples/build_system/make/cpu/rv32imac-ilp32.mk | 13 + examples/build_system/make/toolchain/riscv_gcc.mk | 20 ++ examples/device/video_capture/skip.txt | 1 - .../ch32v307/boards/ch32v307v_r1_1v0/board.cmake | 4 + .../ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c | 110 -------- .../ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h | 31 --- hw/bsp/ch32v307/debug_uart.c | 110 ++++++++ hw/bsp/ch32v307/debug_uart.h | 31 +++ hw/bsp/ch32v307/family.cmake | 114 ++++++++ hw/bsp/ch32v307/family.mk | 12 +- .../led_strip_rmt_ws2812/dependencies.lock | 15 -- hw/bsp/family_support.cmake | 24 +- hw/bsp/fomu/boards/fomu/board.cmake | 4 + hw/bsp/fomu/family.c | 121 +++++++++ hw/bsp/fomu/family.cmake | 91 +++++++ hw/bsp/fomu/family.mk | 9 +- hw/bsp/fomu/fomu.c | 120 --------- .../boards/sipeed_longan_nano/board.cmake | 13 + .../gd32vf103/boards/sipeed_longan_nano/board.mk | 1 - hw/bsp/gd32vf103/family.c | 4 +- hw/bsp/gd32vf103/family.cmake | 119 +++++++++ hw/bsp/gd32vf103/family.mk | 10 +- hw/bsp/lpc51/family.cmake | 1 - src/device/usbd.c | 28 +- src/device/usbd_pvt.h | 7 +- test/hil/hfp.json | 25 ++ test/hil/hil_hfp.json | 25 -- test/hil/hil_pi4.json | 37 --- test/hil/hil_test.py | 69 +++-- test/hil/pi4.json | 27 ++ test/hil/pi4_esp32.json | 14 + tools/build.py | 177 +++++++++++++ tools/build_board.py | 69 ----- tools/build_cmake.py | 105 -------- tools/build_make.py | 80 ------ tools/get_deps.py | 54 ++-- 58 files changed, 1482 insertions(+), 1157 deletions(-) create mode 100644 .github/actions/prepare_build/action.yml create mode 100644 .github/actions/setup_toolchain/action.yml create mode 100644 .github/actions/setup_toolchain/download/action.yml delete mode 100644 .github/workflows/build_aarch64.yml delete mode 100644 .github/workflows/build_arm.yml create mode 100644 .github/workflows/build_family.yml delete mode 100644 .github/workflows/build_riscv.yml create mode 100644 .github/workflows/ci_set_matrix.py create mode 100644 .github/workflows/hil_test.yml create mode 100644 examples/build_system/cmake/cpu/rv32i-ilp32.cmake create mode 100644 examples/build_system/cmake/cpu/rv32imac-ilp32.cmake create mode 100644 examples/build_system/cmake/toolchain/riscv_gcc.cmake create mode 100644 examples/build_system/make/cpu/rv32i-ilp32.mk create mode 100644 examples/build_system/make/cpu/rv32imac-ilp32.mk create mode 100644 examples/build_system/make/toolchain/riscv_gcc.mk create mode 100644 hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.cmake delete mode 100644 hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c delete mode 100644 hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h create mode 100644 hw/bsp/ch32v307/debug_uart.c create mode 100644 hw/bsp/ch32v307/debug_uart.h create mode 100644 hw/bsp/ch32v307/family.cmake delete mode 100644 hw/bsp/espressif/components/led_strip/examples/led_strip_rmt_ws2812/dependencies.lock create mode 100644 hw/bsp/fomu/boards/fomu/board.cmake create mode 100644 hw/bsp/fomu/family.c create mode 100644 hw/bsp/fomu/family.cmake delete mode 100644 hw/bsp/fomu/fomu.c create mode 100644 hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.cmake create mode 100644 hw/bsp/gd32vf103/family.cmake create mode 100644 test/hil/hfp.json delete mode 100644 test/hil/hil_hfp.json delete mode 100644 test/hil/hil_pi4.json create mode 100644 test/hil/pi4.json create mode 100644 test/hil/pi4_esp32.json create mode 100644 tools/build.py delete mode 100644 tools/build_board.py delete mode 100644 tools/build_cmake.py delete mode 100644 tools/build_make.py (limited to 'examples/build_system') diff --git a/.github/actions/prepare_build/action.yml b/.github/actions/prepare_build/action.yml new file mode 100644 index 000000000..5f2c544c1 --- /dev/null +++ b/.github/actions/prepare_build/action.yml @@ -0,0 +1,30 @@ +name: Prepare to build + +inputs: + family: + required: true + type: string + +runs: + using: "composite" + steps: + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Checkout pico-sdk for rp2040 + if: contains(inputs.family, 'rp2040') + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Get Dependencies + run: | + sudo apt install -y ninja-build + pip install click + python3 tools/get_deps.py ${{ inputs.family }} + echo >> $GITHUB_ENV "PICO_SDK_PATH=$GITHUB_WORKSPACE/pico-sdk" + shell: bash diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml new file mode 100644 index 000000000..b59ece116 --- /dev/null +++ b/.github/actions/setup_toolchain/action.yml @@ -0,0 +1,31 @@ +name: Setup Toolchain + +inputs: + toolchain: + required: true + type: string + toolchain_url: + required: false + type: string + +runs: + using: "composite" + steps: + - name: Install ARM GCC + if: inputs.toolchain == 'arm-gcc' + uses: carlosperate/arm-none-eabi-gcc-action@v1 + with: + release: '12.3.Rel1' + + - name: Pull ESP-IDF docker + if: inputs.toolchain == 'esp-idf' + run: docker pull espressif/idf:latest + shell: bash + + - name: Download Toolchain + if: >- + inputs.toolchain != 'arm-gcc' && + inputs.toolchain != 'esp-idf' + uses: ./.github/actions/setup_toolchain/download + with: + toolchain_url: ${{ inputs.toolchain_url }} diff --git a/.github/actions/setup_toolchain/download/action.yml b/.github/actions/setup_toolchain/download/action.yml new file mode 100644 index 000000000..db85e9027 --- /dev/null +++ b/.github/actions/setup_toolchain/download/action.yml @@ -0,0 +1,29 @@ +name: Download Toolchain + +inputs: + toolchain_url: + required: true + type: string + +runs: + using: "composite" + steps: + - name: Cache Toolchain + uses: actions/cache@v4 + id: cache-toolchain + with: + path: ~/cache/toolchain + key: ${{ runner.os }}-${{ inputs.toolchain_url }} + + - name: Install Toolchain + if: steps.cache-toolchain.outputs.cache-hit != 'true' + run: | + mkdir -p ~/cache/toolchain + wget --progress=dot:mega ${{ inputs.toolchain_url }} -O toolchain.tar.gz + tar -C ~/cache/toolchain -xaf toolchain.tar.gz + shell: bash + + - name: Set Toolchain Path + run: | + echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + shell: bash diff --git a/.github/workflows/build_aarch64.yml b/.github/workflows/build_aarch64.yml deleted file mode 100644 index 237692498..000000000 --- a/.github/workflows/build_aarch64.yml +++ /dev/null @@ -1,70 +0,0 @@ -name: Build AArch64 - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/build_aarch64.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/build_aarch64.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - # --------------------------------------- - # Build AARCH64 family - # --------------------------------------- - build-arm: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'broadcom_64bit' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz - - - name: Cache Toolchain - uses: actions/cache@v4 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-21-11-02-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.gz - tar -C ~/cache/toolchain -xaf toolchain.tar.gz - - - name: Set Toolchain Path - run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - - - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python3 tools/build_make.py ${{ matrix.family }} diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml deleted file mode 100644 index 14c6d519c..000000000 --- a/.github/workflows/build_arm.yml +++ /dev/null @@ -1,57 +0,0 @@ -name: Build ARM - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_arm.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_arm.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - # --------------------------------------- - # Build ARM family - # --------------------------------------- - build-arm: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'mm32' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '11.2-2022.02' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python3 tools/build_make.py ${{ matrix.family }} diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index c1f85ad9c..b62a0e9bd 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -1,4 +1,4 @@ -name: Build CMake +name: Build on: workflow_dispatch: @@ -8,9 +8,11 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' - - 'test/hil/**' - 'tools/get_deps.py' + - 'tools/build.py' + - '.github/actions/**' - '.github/workflows/build_cmake.yml' + - '.github/workflows/ci_set_matrix.py' pull_request: branches: [ master ] paths: @@ -18,141 +20,20 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' - - 'test/hil/**' - 'tools/get_deps.py' + - 'tools/build.py' + - '.github/actions/**' - '.github/workflows/build_cmake.yml' - + - '.github/workflows/ci_set_matrix.py' concurrency: group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} cancel-in-progress: true jobs: - # --------------------------------------- - # Build ARM with GCC - # --------------------------------------- - arm-gcc: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'broadcom_32bit' - - 'imxrt' - - 'kinetis_k kinetis_kl kinetis_k32l2' - - 'lpc11 lpc13 lpc15' - - 'lpc17 lpc18 lpc40 lpc43' - - 'lpc51 lpc54 lpc55' - - 'mcx' - - 'msp432e4' - - 'mm32' - - 'nrf' - - 'ra' - - 'rp2040' - - 'samd11 samd21 saml2x samd5x_e5x samg' - - 'stm32f0' - - 'stm32f1' - - 'stm32f2' - - 'stm32f3' - - 'stm32f4' - - 'stm32f7' - - 'stm32g0' - - 'stm32g4' - - 'stm32h5' - - 'stm32h7' - - 'stm32l4' - - 'stm32u5' - - 'stm32wb' - - 'tm4c' - - 'xmc4000' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '12.3.Rel1' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Checkout pico-sdk for rp2040 - if: matrix.family == 'rp2040' - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Get Dependencies - run: | - sudo apt install -y ninja-build - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk - - - name: Upload Artifacts for Hardware Testing (rp2040) - if: contains(matrix.family, 'rp2040') && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: raspberry_pi_pico - path: | - cmake-build/cmake-build-raspberry_pi_pico/*/*/*.elf - - - name: Upload Artifacts for Hardware Testing (nRF) - if: contains(matrix.family, 'nrf') && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: feather_nrf52840_express - path: | - cmake-build/cmake-build-feather_nrf52840_express/*/*/*.elf - - - name: Upload Artifacts for Hardware Testing (samd51) - if: contains(matrix.family, 'samd5x_e5x') && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: itsybitsy_m4 - path: | - cmake-build/cmake-build-itsybitsy_m4/*/*/*.bin - - # --------------------------------------- - # Build ARM with Clang - # --------------------------------------- - arm-clang: + set-matrix: runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'imxrt' - - 'kinetis_k kinetis_kl' - - 'lpc17 lpc18 lpc40 lpc43' - - 'lpc54 lpc55' - #- 'mcx' not working with gcc anymore, need to fix this first - - 'nrf' - #- 'ra' port later - #- 'rp2040' port later - - 'samd21' - - 'samd5x_e5x' - - 'stm32f0' - - 'stm32f1' - - 'stm32f2' - - 'stm32f3' - - 'stm32f4' - - 'stm32f7' - - 'stm32g0' - - 'stm32g4' - - 'stm32h5' - - 'stm32h7' - - 'stm32l4' - - 'stm32u5' + outputs: + json: ${{ steps.set-matrix-json.outputs.matrix }} steps: - name: Setup Python uses: actions/setup-python@v5 @@ -162,137 +43,51 @@ jobs: - name: Checkout TinyUSB uses: actions/checkout@v4 - - name: Checkout pico-sdk for rp2040 - if: matrix.family == 'rp2040' - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz - - - name: Cache Toolchain - uses: actions/cache@v4 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-24-04-17-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.xz - tar -C ~/cache/toolchain -xaf toolchain.tar.xz - - - name: Prepare to build + - name: Generate matrix json + id: set-matrix-json run: | - echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - sudo apt install -y ninja-build - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk + MATRIX_JSON=$(python .github/workflows/ci_set_matrix.py) + echo "matrix=$MATRIX_JSON" + echo "matrix=$MATRIX_JSON" >> $GITHUB_OUTPUT # --------------------------------------- - # Build MSP430 with GCC + # Build CMake # --------------------------------------- - msp430-gcc: - runs-on: ubuntu-latest + cmake: + needs: set-matrix + uses: ./.github/workflows/build_family.yml strategy: fail-fast: false matrix: - family: - # Alphabetical order - - 'msp430' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 - - - name: Cache Toolchain - uses: actions/cache@v4 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-24-04-17-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.bz2 - tar -C ~/cache/toolchain -xaf toolchain.tar.bz2 - - - name: Prepare to build - run: | - echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - sudo apt install -y ninja-build - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} + toolchain: + - 'aarch64-gcc' + - 'arm-clang' + - 'arm-gcc' + - 'msp430-gcc' + - 'riscv-gcc' + with: + build-system: 'cmake' + toolchain: ${{ matrix.toolchain }} + toolchain_url: ${{ fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].toolchain_url }} + build-family: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} # --------------------------------------- - # Hardware in the loop (HIL) - # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json + # Build Make # --------------------------------------- - hil-test: - # run only with hathach's commit due to limited resource on RPI4 - if: github.repository_owner == 'hathach' - needs: arm-gcc - runs-on: [self-hosted, rp2040, nrf52840, hardware-in-the-loop] + make: + needs: set-matrix + uses: ./.github/workflows/build_family.yml strategy: fail-fast: false matrix: - board: - - 'feather_nrf52840_express' - - 'itsybitsy_m4' - - 'raspberry_pi_pico' - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - # USB bus on rpi4 is not stable, reset it before testing - - name: Reset USB bus - run: | - lsusb - lsusb -t - # reset VIA Labs 2.0 hub - sudo usbreset 001/002 - - # legacy code - #for port in $(lspci | grep USB | cut -d' ' -f1); do - # echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; - # sleep 0.1; - # echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; - #done - - - name: Checkout test/hil - uses: actions/checkout@v4 - with: - sparse-checkout: test/hil - - - name: Download Artifacts - uses: actions/download-artifact@v4 - with: - name: ${{ matrix.board }} - path: cmake-build/cmake-build-${{ matrix.board }} - - - name: Test on actual hardware - run: | - python3 test/hil/hil_test.py --board ${{ matrix.board }} hil_pi4.json + toolchain: + - 'aarch64-gcc' + #- 'arm-clang' + - 'arm-gcc' + - 'msp430-gcc' + - 'riscv-gcc' + with: + build-system: 'make' + toolchain: ${{ matrix.toolchain }} + toolchain_url: ${{ fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].toolchain_url }} + build-family: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 4108a58a5..66fa8548e 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -41,14 +41,16 @@ jobs: with: python-version: '3.x' - - name: Pull ESP-IDF docker - run: docker pull espressif/idf:latest - - name: Checkout TinyUSB uses: actions/checkout@v4 + - name: Setup Toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: 'esp-idf' + - name: Build - run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build_esp32.py ${{ matrix.board }} + run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build.py -b ${{ matrix.board }} - name: Upload Artifacts for Hardware Testing if: matrix.board == 'espressif_s3_devkitm' && github.repository_owner == 'hathach' @@ -91,13 +93,6 @@ jobs: # reset VIA Labs 2.0 hub sudo usbreset 001/002 - # legacy code - #for port in $(lspci | grep USB | cut -d' ' -f1); do - # echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; - # sleep 0.1; - # echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; - #done - - name: Checkout test/hil uses: actions/checkout@v4 with: @@ -111,4 +106,4 @@ jobs: - name: Test on actual hardware run: | - python3 test/hil/hil_test.py --board ${{ matrix.board }} hil_pi4.json + python3 test/hil/hil_test.py --board ${{ matrix.board }} pi4_esp32.json diff --git a/.github/workflows/build_family.yml b/.github/workflows/build_family.yml new file mode 100644 index 000000000..2e89267a3 --- /dev/null +++ b/.github/workflows/build_family.yml @@ -0,0 +1,64 @@ +name: Build family + +on: + workflow_call: + inputs: + build-system: + required: true + type: string + toolchain: + required: true + type: string + toolchain_url: + required: true + type: string + build-family: + required: true + type: string + +jobs: + family: + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + family: ${{ fromJSON(inputs.build-family) }} + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Setup Toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: ${{ inputs.toolchain }} + toolchain_url: ${{ inputs.toolchain_url }} + + - name: Checkout pico-sdk for rp2040 + if: contains(matrix.family, 'rp2040') + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Get Dependencies + run: | + sudo apt install -y ninja-build + pip install click + python3 tools/get_deps.py ${{ matrix.family }} + + - name: Build + run: | + OPTION="" + if [[ "${{ inputs.toolchain }}" == *"clang"* ]]; then + OPTION="--toolchain clang" + fi + echo "OPTION=$OPTION" + python tools/build.py -s ${{ inputs.build-system }} $OPTION ${{ matrix.family }} + env: + PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index 6b1493a97..c4a7f96b7 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -52,8 +52,8 @@ jobs: run: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=iar + run: python3 tools/build.py --toolchain iar ${{ matrix.family }} - name: Test on actual hardware (hardware in the loop) run: | - python3 test/hil/hil_test.py hil_hfp.json + python3 test/hil/hil_test.py hfp.json diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index fbc12d285..8c83bdbbf 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -64,7 +64,9 @@ jobs: run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} + run: | + pip install click + python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_make.py ${{ matrix.family }} + run: python3 tools/build.py -s make ${{ matrix.family }} diff --git a/.github/workflows/build_riscv.yml b/.github/workflows/build_riscv.yml deleted file mode 100644 index 7f5031ff1..000000000 --- a/.github/workflows/build_riscv.yml +++ /dev/null @@ -1,71 +0,0 @@ -name: Build RISC-V - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_riscv.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_riscv.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - build-riscv: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'ch32v307' - - 'fomu' - - 'gd32vf103' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz - - - name: Cache Toolchain - uses: actions/cache@v4 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-21-03-04-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.gz - tar -C ~/cache/toolchain -xaf toolchain.tar.gz - - - name: Set Toolchain Path - run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - - - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python3 tools/build_make.py ${{ matrix.family }} diff --git a/.github/workflows/build_win_mac.yml b/.github/workflows/build_win_mac.yml index b33b5b593..35328aa32 100644 --- a/.github/workflows/build_win_mac.yml +++ b/.github/workflows/build_win_mac.yml @@ -48,7 +48,9 @@ jobs: uses: actions/checkout@v4 - name: Get Dependencies - run: python3 tools/get_deps.py stm32f4 + run: | + pip install click + python3 tools/get_deps.py stm32f4 - name: Build - run: python3 tools/build_make.py stm32f4 stm32f411disco + run: python3 tools/build.py -s make stm32f2 diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py new file mode 100644 index 000000000..2a17be6a1 --- /dev/null +++ b/.github/workflows/ci_set_matrix.py @@ -0,0 +1,51 @@ +import json + +# toolchain, url +toolchain_list = { + "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", + "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz", + "arm-gcc": "", + "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", + "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz", +} + +# family: [supported toolchain] +family_list = { + "broadcom_32bit": ["arm-gcc"], + "broadcom_64bit": ["aarch64-gcc"], + "ch32v307 fomu gd32vf103": ["riscv-gcc"], + "imxrt": ["arm-gcc", "arm-clang"], + "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], + "lpc11 lpc13 lpc15": ["arm-gcc"], + "lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], + "lpc51 lpc54 lpc55": ["arm-gcc", "arm-clang"], + "mcx": ["arm-gcc"], + "mm32": ["arm-gcc"], + "msp430": ["msp430-gcc"], + "msp432e4 tm4c": ["arm-gcc"], + "nrf": ["arm-gcc", "arm-clang"], + "ra": ["arm-gcc"], + "rp2040": ["arm-gcc"], + "samd11 samd21 saml2x": ["arm-gcc", "arm-clang"], + "samd5x_e5x samg": ["arm-gcc", "arm-clang"], + "stm32f0 stm32f1 stm32f2 stm32f3": ["arm-gcc", "arm-clang"], + "stm32f4": ["arm-gcc", "arm-clang"], + "stm32f7": ["arm-gcc", "arm-clang"], + "stm32g0 stm32g4 stm32h5": ["arm-gcc", "arm-clang"], + "stm32h7": ["arm-gcc", "arm-clang"], + "stm32l4 stm32u5 stm32wb": ["arm-gcc", "arm-clang"], + "xmc4000": ["arm-gcc"], +} + + +def set_matrix_json(): + matrix = {} + for toolchain in toolchain_list.keys(): + filtered_families = [family for family, supported_toolchain in family_list.items() if + toolchain in supported_toolchain] + matrix[toolchain] = {"family": filtered_families, "toolchain_url": toolchain_list[toolchain]} + print(json.dumps(matrix)) + + +if __name__ == '__main__': + set_matrix_json() diff --git a/.github/workflows/cifuzz.yml b/.github/workflows/cifuzz.yml index 5dc0f2764..faa0f911c 100644 --- a/.github/workflows/cifuzz.yml +++ b/.github/workflows/cifuzz.yml @@ -12,6 +12,7 @@ on: - '**.h' jobs: Fuzzing: + if: false runs-on: ubuntu-latest steps: - name: Build Fuzzers @@ -20,12 +21,14 @@ jobs: with: oss-fuzz-project-name: 'tinyusb' language: c++ + - name: Run Fuzzers uses: google/oss-fuzz/infra/cifuzz/actions/run_fuzzers@master with: oss-fuzz-project-name: 'tinyusb' language: c++ fuzz-seconds: 600 + - name: Upload Crash uses: actions/upload-artifact@v4 if: failure() && steps.build.outcome == 'success' diff --git a/.github/workflows/codeql-buildscript.sh b/.github/workflows/codeql-buildscript.sh index 35e029922..272b55d22 100644 --- a/.github/workflows/codeql-buildscript.sh +++ b/.github/workflows/codeql-buildscript.sh @@ -1,5 +1,6 @@ #!/usr/bin/env bash FAMILY=stm32l4 +pip install click python3 tools/get_deps.py $FAMILY -python3 tools/build_make.py $FAMILY +python3 tools/build.py -s make $FAMILY diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml new file mode 100644 index 000000000..024ab969d --- /dev/null +++ b/.github/workflows/hil_test.yml @@ -0,0 +1,125 @@ +name: Hardware Test + +on: + workflow_dispatch: + push: + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'test/hil/**' + - 'tools/get_deps.py' + - '.github/actions/**' + - '.github/workflows/hil_test.yml' + pull_request: + branches: [ master ] + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'test/hil/**' + - 'tools/get_deps.py' + - '.github/actions/**' + - '.github/workflows/hil_test.yml' +concurrency: + group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + cancel-in-progress: true + +jobs: + build: + if: github.repository_owner == 'hathach' + runs-on: ubuntu-latest + outputs: + BOARD_LIST: ${{ steps.parse_hil_json.outputs.BOARD_LIST }} + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Install ARM GCC + uses: carlosperate/arm-none-eabi-gcc-action@v1 + with: + release: '12.3.Rel1' + + - name: Parse HIL json + id: parse_hil_json + run: | + sudo apt install -y jq + BOARD_LIST=$(jq -r '.boards[] | "-b " + .name' test/hil/pi4.json | tr '\n' ' ') + echo "BOARD_LIST=$BOARD_LIST" + echo >> $GITHUB_ENV "BOARD_LIST=$BOARD_LIST" + echo >> $GITHUB_OUTPUT "BOARD_LIST=$BOARD_LIST" + + - name: Checkout pico-sdk for rp2040 + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Get Dependencies + run: | + pip install click + sudo apt install -y ninja-build + python3 tools/get_deps.py $BOARD_LIST + + - name: Build + run: | + python tools/build.py $BOARD_LIST + env: + PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk + + - name: Upload Artifacts for Hardware Testing + uses: actions/upload-artifact@v4 + with: + name: hil_pi4 + path: | + cmake-build/cmake-build-*/*/*/*.elf + cmake-build/cmake-build-*/*/*/*.bin + + # --------------------------------------- + # Hardware in the loop (HIL) + # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json + # --------------------------------------- + hil-pi4: + if: github.repository_owner == 'hathach' + needs: build + runs-on: [self-hosted, rp2040, nrf52840, hardware-in-the-loop] + env: + BOARD_LIST: ${{ needs.build.outputs.BOARD_LIST }} + steps: + - name: Clean workspace + run: | + echo "Cleaning up previous run" + rm -rf "${{ github.workspace }}" + mkdir -p "${{ github.workspace }}" + + # USB bus on rpi4 is not stable, reset it before testing + - name: Reset USB bus + run: | + lsusb + lsusb -t + # reset VIA Labs 2.0 hub + sudo usbreset 001/002 + + - name: Checkout TinyUSB + uses: actions/checkout@v4 + with: + sparse-checkout: test/hil + + - name: Download Artifacts + uses: actions/download-artifact@v4 + with: + name: hil_pi4 + path: cmake-build + + - name: Test on actual hardware + run: | + echo "BOARD_LIST=$BOARD_LIST" + python3 test/hil/hil_test.py $BOARD_LIST pi4.json diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index e36259daa..6b3151702 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -38,6 +38,7 @@ jobs: - name: Build Fuzzer run: | + pip install click export CC=clang export CXX=clang++ fuzz_harness=$(ls -d test/fuzz/device/*/) diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 0e2ca61e4..bb13a0466 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -117,7 +117,7 @@ - + @@ -125,7 +125,11 @@ - + + + + + \ No newline at end of file diff --git a/examples/build_system/cmake/cpu/rv32i-ilp32.cmake b/examples/build_system/cmake/cpu/rv32i-ilp32.cmake new file mode 100644 index 000000000..b4889e6ff --- /dev/null +++ b/examples/build_system/cmake/cpu/rv32i-ilp32.cmake @@ -0,0 +1,19 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -march=rv32i + -mabi=ilp32 + ) + set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + -march=rv32i + -mabi=ilp32 + ) + set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + set(FREERTOS_PORT IAR_RISC_V CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake new file mode 100644 index 000000000..dd1bc0af7 --- /dev/null +++ b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake @@ -0,0 +1,18 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -march=rv32imac + -mabi=ilp32 + ) + set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + -march=rv32imac + -mabi=ilp32 + ) + set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + set(FREERTOS_PORT IAR_RISC_V CACHE INTERNAL "") +endif () diff --git a/examples/build_system/cmake/toolchain/riscv_gcc.cmake b/examples/build_system/cmake/toolchain/riscv_gcc.cmake new file mode 100644 index 000000000..904b27294 --- /dev/null +++ b/examples/build_system/cmake/toolchain/riscv_gcc.cmake @@ -0,0 +1,21 @@ +if (NOT DEFINED CMAKE_C_COMPILER) + set(CMAKE_C_COMPILER "riscv-none-embed-gcc") +endif () + +if (NOT DEFINED CMAKE_CXX_COMPILER) + set(CMAKE_CXX_COMPILER "riscv-none-embed-g++") +endif () + +set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) +set(CMAKE_SIZE "riscv-none-embed-size" CACHE FILEPATH "") +set(CMAKE_OBJCOPY "riscv-none-embed-objcopy" CACHE FILEPATH "") +set(CMAKE_OBJDUMP "riscv-none-embed-objdump" CACHE FILEPATH "") + +include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) + +get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) +if (IS_IN_TRY_COMPILE) + set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") + set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") + cmake_print_variables(CMAKE_C_LINK_FLAGS) +endif () diff --git a/examples/build_system/make/cpu/rv32i-ilp32.mk b/examples/build_system/make/cpu/rv32i-ilp32.mk new file mode 100644 index 000000000..a465baf4c --- /dev/null +++ b/examples/build_system/make/cpu/rv32i-ilp32.mk @@ -0,0 +1,13 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -march=rv32i \ + -mabi=ilp32 \ + +else ifeq ($(TOOLCHAIN),iar) + #CFLAGS += --cpu cortex-a53 + #ASFLAGS += --cpu cortex-a53 + +endif + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V diff --git a/examples/build_system/make/cpu/rv32imac-ilp32.mk b/examples/build_system/make/cpu/rv32imac-ilp32.mk new file mode 100644 index 000000000..2b6493e48 --- /dev/null +++ b/examples/build_system/make/cpu/rv32imac-ilp32.mk @@ -0,0 +1,13 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -march=rv32imac \ + -mabi=ilp32 \ + +else ifeq ($(TOOLCHAIN),iar) + #CFLAGS += --cpu cortex-a53 + #ASFLAGS += --cpu cortex-a53 + +endif + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V diff --git a/examples/build_system/make/toolchain/riscv_gcc.mk b/examples/build_system/make/toolchain/riscv_gcc.mk new file mode 100644 index 000000000..843aff38c --- /dev/null +++ b/examples/build_system/make/toolchain/riscv_gcc.mk @@ -0,0 +1,20 @@ +# makefile for arm gcc toolchain + +# Can be set by family, default to ARM GCC +CROSS_COMPILE ?= riscv-none-embed- + +CC = $(CROSS_COMPILE)gcc +CXX = $(CROSS_COMPILE)g++ +AS = $(CC) -x assembler-with-cpp +LD = $(CC) + +GDB = $(CROSS_COMPILE)gdb +OBJCOPY = $(CROSS_COMPILE)objcopy +SIZE = $(CROSS_COMPILE)size + +CFLAGS += \ + -fsingle-precision-constant \ + +LIBS += -lgcc -lm -lnosys + +include ${TOP}/examples/build_system/make/toolchain/gcc_common.mk diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt index db64cc639..5898664a2 100644 --- a/examples/device/video_capture/skip.txt +++ b/examples/device/video_capture/skip.txt @@ -1,4 +1,3 @@ mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 -family:espressif diff --git a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.cmake b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.cmake new file mode 100644 index 000000000..9f5682042 --- /dev/null +++ b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.cmake @@ -0,0 +1,4 @@ +function(update_board TARGET) +# target_compile_definitions(${TARGET} PUBLIC +# ) +endfunction() diff --git a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c deleted file mode 100644 index db3551ca7..000000000 --- a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2022 Greg Davill - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "debug_uart.h" -#include - - -#define UART_RINGBUFFER_SIZE_TX 64 -#define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX-1) - -static char tx_buf[UART_RINGBUFFER_SIZE_TX]; -static unsigned int tx_produce; -static volatile unsigned int tx_consume; - -void USART1_IRQHandler(void) __attribute__((naked)); -void USART1_IRQHandler(void) { - __asm volatile ("call USART1_IRQHandler_impl; mret"); -} - -__attribute__((used)) void USART1_IRQHandler_impl(void) -{ - if(USART_GetITStatus(USART1, USART_IT_TC) != RESET) - { - USART_ClearITPendingBit(USART1, USART_IT_TC); - - if(tx_consume != tx_produce) { - USART_SendData(USART1, tx_buf[tx_consume]); - tx_consume = (tx_consume + 1) & UART_RINGBUFFER_MASK_TX; - } - } - -} - -void uart_write(char c) -{ - unsigned int tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; - - NVIC_DisableIRQ(USART1_IRQn); - if((tx_consume != tx_produce) || (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)) { - tx_buf[tx_produce] = c; - tx_produce = tx_produce_next; - } else { - USART_SendData(USART1, c); - } - NVIC_EnableIRQ(USART1_IRQn); -} - - -void uart_sync(void) -{ - while(tx_consume != tx_produce); -} - - -void usart_printf_init(uint32_t baudrate) -{ - GPIO_InitTypeDef GPIO_InitStructure; - USART_InitTypeDef USART_InitStructure; - - tx_produce = 0; - tx_consume = 0; - - RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOA, &GPIO_InitStructure); - - USART_InitStructure.USART_BaudRate = baudrate; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Tx; - - USART_Init(USART1, &USART_InitStructure); - USART_ITConfig(USART1, USART_IT_TC, ENABLE); - USART_Cmd(USART1, ENABLE); - - NVIC_InitTypeDef NVIC_InitStructure = { 0 }; - NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -} diff --git a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h deleted file mode 100644 index a7e070585..000000000 --- a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2022 Greg Davill - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include - -void uart_write(char c); -void uart_sync(void); -void usart_printf_init(uint32_t baudrate); diff --git a/hw/bsp/ch32v307/debug_uart.c b/hw/bsp/ch32v307/debug_uart.c new file mode 100644 index 000000000..db3551ca7 --- /dev/null +++ b/hw/bsp/ch32v307/debug_uart.c @@ -0,0 +1,110 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 Greg Davill + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "debug_uart.h" +#include + + +#define UART_RINGBUFFER_SIZE_TX 64 +#define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX-1) + +static char tx_buf[UART_RINGBUFFER_SIZE_TX]; +static unsigned int tx_produce; +static volatile unsigned int tx_consume; + +void USART1_IRQHandler(void) __attribute__((naked)); +void USART1_IRQHandler(void) { + __asm volatile ("call USART1_IRQHandler_impl; mret"); +} + +__attribute__((used)) void USART1_IRQHandler_impl(void) +{ + if(USART_GetITStatus(USART1, USART_IT_TC) != RESET) + { + USART_ClearITPendingBit(USART1, USART_IT_TC); + + if(tx_consume != tx_produce) { + USART_SendData(USART1, tx_buf[tx_consume]); + tx_consume = (tx_consume + 1) & UART_RINGBUFFER_MASK_TX; + } + } + +} + +void uart_write(char c) +{ + unsigned int tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; + + NVIC_DisableIRQ(USART1_IRQn); + if((tx_consume != tx_produce) || (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)) { + tx_buf[tx_produce] = c; + tx_produce = tx_produce_next; + } else { + USART_SendData(USART1, c); + } + NVIC_EnableIRQ(USART1_IRQn); +} + + +void uart_sync(void) +{ + while(tx_consume != tx_produce); +} + + +void usart_printf_init(uint32_t baudrate) +{ + GPIO_InitTypeDef GPIO_InitStructure; + USART_InitTypeDef USART_InitStructure; + + tx_produce = 0; + tx_consume = 0; + + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); + + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(GPIOA, &GPIO_InitStructure); + + USART_InitStructure.USART_BaudRate = baudrate; + USART_InitStructure.USART_WordLength = USART_WordLength_8b; + USART_InitStructure.USART_StopBits = USART_StopBits_1; + USART_InitStructure.USART_Parity = USART_Parity_No; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Tx; + + USART_Init(USART1, &USART_InitStructure); + USART_ITConfig(USART1, USART_IT_TC, ENABLE); + USART_Cmd(USART1, ENABLE); + + NVIC_InitTypeDef NVIC_InitStructure = { 0 }; + NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} diff --git a/hw/bsp/ch32v307/debug_uart.h b/hw/bsp/ch32v307/debug_uart.h new file mode 100644 index 000000000..a7e070585 --- /dev/null +++ b/hw/bsp/ch32v307/debug_uart.h @@ -0,0 +1,31 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 Greg Davill + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include + +void uart_write(char c); +void uart_sync(void); +void usart_printf_init(uint32_t baudrate); diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake new file mode 100644 index 000000000..87a0f2eba --- /dev/null +++ b/hw/bsp/ch32v307/family.cmake @@ -0,0 +1,114 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307/EVT/EXAM/SRC) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") +set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") +set(OPENOCD_OPTION2 "-c wlink_reset_resume") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ch32v307.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_ch32v30x_D8C.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/Core/core_riscv.c + ${SDK_DIR}/Peripheral/src/ch32v30x_gpio.c + ${SDK_DIR}/Peripheral/src/ch32v30x_misc.c + ${SDK_DIR}/Peripheral/src/ch32v30x_rcc.c + ${SDK_DIR}/Peripheral/src/ch32v30x_usart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ch32v30x_it.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_ch32v30x.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/Peripheral/inc + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC + -msmall-data-limit=8 + -mno-save-restore + -fmessage-length=0 + -fsigned-char + ) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/debug_uart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_CH32V307 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/wch/dcd_ch32_usbhs.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_openocd_wch(${TARGET}) +endfunction() diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 07e57f04c..003b90539 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -6,29 +6,28 @@ CROSS_COMPILE ?= riscv-none-embed- # Submodules CH32V307_SDK = hw/mcu/wch/ch32v307 -DEPS_SUBMODULES += $(CH32V307_SDK) # WCH-SDK paths CH32V307_SDK_SRC = $(CH32V307_SDK)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= rv32imac-ilp32 CFLAGS += \ -flto \ - -march=rv32imac \ - -mabi=ilp32 \ -msmall-data-limit=8 \ -mno-save-restore -Os \ -fmessage-length=0 \ -fsigned-char \ -ffunction-sections \ -fdata-sections \ - -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_CH32V307 \ -Xlinker --gc-sections \ -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs SRC_C += \ src/portable/wch/dcd_ch32_usbhs.c \ @@ -62,5 +61,6 @@ FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V # openocd binaries will be generated in riscv-openocd-wch/src # flash target ROM bootloader +OPENOCD_WCH = /home/${USER}/app/riscv-openocd-wch/src/openocd flash: $(BUILD)/$(PROJECT).elf - openocd -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "program $<" -c wlink_reset_resume -c exit + $(OPENOCD_WCH) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "program $<" -c wlink_reset_resume -c exit diff --git a/hw/bsp/espressif/components/led_strip/examples/led_strip_rmt_ws2812/dependencies.lock b/hw/bsp/espressif/components/led_strip/examples/led_strip_rmt_ws2812/dependencies.lock deleted file mode 100644 index 97840a153..000000000 --- a/hw/bsp/espressif/components/led_strip/examples/led_strip_rmt_ws2812/dependencies.lock +++ /dev/null @@ -1,15 +0,0 @@ -dependencies: - espressif/led_strip: - component_hash: null - source: - path: /home/hathach/code/idf-extra-components/led_strip - type: local - version: 2.5.2 - idf: - component_hash: null - source: - type: idf - version: 5.1.1 -manifest_hash: 47d47762be26168b388cb0e6cbfee6b22c68d630ebf4b27a49c47c4c54191590 -target: esp32s3 -version: 1.0.0 diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index bac1ecb5f..df4f616ef 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -385,6 +385,10 @@ function(family_flash_jlink TARGET) set(JLINKEXE JLinkExe) endif () + if (NOT DEFINED JLINK_IF) + set(JLINK_IF swd) + endif () + file(GENERATE OUTPUT $/${TARGET}.jlink CONTENT "halt @@ -396,7 +400,7 @@ exit" add_custom_target(${TARGET}-jlink DEPENDS ${TARGET} - COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile $/${TARGET}.jlink + COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if ${JLINK_IF} -JTAGConf -1,-1 -speed auto -CommandFile $/${TARGET}.jlink ) endfunction() @@ -420,16 +424,30 @@ function(family_flash_openocd TARGET) set(OPENOCD openocd) endif () - separate_arguments(OPENOCD_OPTION_LIST UNIX_COMMAND ${OPENOCD_OPTION}) + if (NOT DEFINED OPENOCD_OPTION2) + set(OPENOCD_OPTION2 "") + endif () + + separate_arguments(OPTION_LIST UNIX_COMMAND ${OPENOCD_OPTION}) + separate_arguments(OPTION_LIST2 UNIX_COMMAND ${OPENOCD_OPTION2}) # note skip verify since it has issue with rp2040 add_custom_target(${TARGET}-openocd DEPENDS ${TARGET} - COMMAND ${OPENOCD} ${OPENOCD_OPTION_LIST} -c "program $ reset exit" + COMMAND ${OPENOCD} ${OPTION_LIST} -c "program $ reset" ${OPTION_LIST2} -c exit VERBATIM ) endfunction() +# Add flash openocd-wch target +function(family_flash_openocd_wch TARGET) + if (NOT DEFINED OPENOCD) + set(OPENOCD $ENV{HOME}/app/riscv-openocd-wch/src/openocd) + endif () + + family_flash_openocd(${TARGET}) +endfunction() + # Add flash pycod target function(family_flash_pyocd TARGET) if (NOT DEFINED PYOC) diff --git a/hw/bsp/fomu/boards/fomu/board.cmake b/hw/bsp/fomu/boards/fomu/board.cmake new file mode 100644 index 000000000..9f5682042 --- /dev/null +++ b/hw/bsp/fomu/boards/fomu/board.cmake @@ -0,0 +1,4 @@ +function(update_board TARGET) +# target_compile_definitions(${TARGET} PUBLIC +# ) +endfunction() diff --git a/hw/bsp/fomu/family.c b/hw/bsp/fomu/family.c new file mode 100644 index 000000000..ccf2b12f4 --- /dev/null +++ b/hw/bsp/fomu/family.c @@ -0,0 +1,121 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include +#include +#include "csr.h" +#include "irq.h" + +#include "bsp/board_api.h" + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void fomu_error(uint32_t line) +{ + (void)line; + TU_BREAKPOINT(); +} + +volatile uint32_t system_ticks = 0; +static void timer_init(void) +{ + int t; + + timer0_en_write(0); + t = CONFIG_CLOCK_FREQUENCY / 1000; // 1000 kHz tick + timer0_reload_write(t); + timer0_load_write(t); + timer0_en_write(1); + timer0_ev_enable_write(1); + timer0_ev_pending_write(1); + irq_setmask(irq_getmask() | (1 << TIMER0_INTERRUPT)); +} + +void isr(void) +{ + unsigned int irqs; + + irqs = irq_pending() & irq_getmask(); + +#if CFG_TUD_ENABLED + if (irqs & (1 << USB_INTERRUPT)) { + tud_int_handler(0); + } +#endif + if (irqs & (1 << TIMER0_INTERRUPT)) { + system_ticks++; + timer0_ev_pending_write(1); + } +} + +void board_init(void) +{ + irq_setmask(0); + irq_setie(1); + timer_init(); + return; +} + +void board_led_write(bool state) +{ + rgb_ctrl_write(0xff); + rgb_raw_write(state); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + int32_t offset = 0; + uint8_t const* buf8 = (uint8_t const*) buf; + for (offset = 0; offset < len; offset++) + { + if (!(messible_status_read() & CSR_MESSIBLE_STATUS_FULL_OFFSET)) + { + messible_in_write(buf8[offset]); + } + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake new file mode 100644 index 000000000..8d5ab144c --- /dev/null +++ b/hw/bsp/fomu/family.cmake @@ -0,0 +1,91 @@ +include_guard() + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32i-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS VALENTYUSB_EPTRI CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/fomu.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/crt0-vexriscv.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/include + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_VALENTYUSB_EPTRI ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/valentyusb/eptri/dcd_eptri.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) +endfunction() diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index f8a3c9ebf..d4b6eaea6 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -1,14 +1,15 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack CROSS_COMPILE = riscv-none-embed- +CPU_CORE ?= rv32i-ilp32 + CFLAGS += \ -flto \ - -march=rv32i \ - -mabi=ilp32 \ - -nostdlib \ -DCFG_TUSB_MCU=OPT_MCU_VALENTYUSB_EPTRI -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs +LDFLAGS_GCC += \ + -nostdlib \ + --specs=nosys.specs --specs=nano.specs \ # All source paths should be relative to the top level. LD_FILE = $(FAMILY_PATH)/fomu.ld diff --git a/hw/bsp/fomu/fomu.c b/hw/bsp/fomu/fomu.c deleted file mode 100644 index d155b743d..000000000 --- a/hw/bsp/fomu/fomu.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include -#include -#include "../board_api.h" -#include "csr.h" -#include "irq.h" - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void fomu_error(uint32_t line) -{ - (void)line; - TU_BREAKPOINT(); -} - -volatile uint32_t system_ticks = 0; -static void timer_init(void) -{ - int t; - - timer0_en_write(0); - t = CONFIG_CLOCK_FREQUENCY / 1000; // 1000 kHz tick - timer0_reload_write(t); - timer0_load_write(t); - timer0_en_write(1); - timer0_ev_enable_write(1); - timer0_ev_pending_write(1); - irq_setmask(irq_getmask() | (1 << TIMER0_INTERRUPT)); -} - -void isr(void) -{ - unsigned int irqs; - - irqs = irq_pending() & irq_getmask(); - -#if CFG_TUD_ENABLED - if (irqs & (1 << USB_INTERRUPT)) { - tud_int_handler(0); - } -#endif - if (irqs & (1 << TIMER0_INTERRUPT)) { - system_ticks++; - timer0_ev_pending_write(1); - } -} - -void board_init(void) -{ - irq_setmask(0); - irq_setie(1); - timer_init(); - return; -} - -void board_led_write(bool state) -{ - rgb_ctrl_write(0xff); - rgb_raw_write(state); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - int32_t offset = 0; - uint8_t const* buf8 = (uint8_t const*) buf; - for (offset = 0; offset < len; offset++) - { - if (!(messible_status_read() & CSR_MESSIBLE_STATUS_FULL_OFFSET)) - { - messible_in_write(buf8[offset]); - } - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.cmake b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.cmake new file mode 100644 index 000000000..403ac08cf --- /dev/null +++ b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.cmake @@ -0,0 +1,13 @@ +set(JLINK_DEVICE gd32vf103cbt6) + +set(SDK_BSP_DIR ${SOC_DIR}/Board/gd32vf103c_longan_nano) +set(LD_FILE_GNU ${SDK_BSP_DIR}/Source/GCC/gcc_gd32vf103xb_flashxip.ld) + +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${SDK_BSP_DIR}/Source/gd32vf103c_longan_nano.c + ) + target_include_directories(${TARGET} PUBLIC + ${SDK_BSP_DIR}/Include + ) +endfunction() diff --git a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk index 3b8944452..fc49b7317 100644 --- a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk +++ b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk @@ -10,4 +10,3 @@ INC += $(TOP)/$(LONGAN_NANO_SDK_BSP)/Include # Longan Nano 128k ROM 32k RAM JLINK_DEVICE = gd32vf103cbt6 -#JLINK_DEVICE = gd32vf103c8t6 # Longan Nano Lite 64k ROM 20k RAM diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index 27d7e87bb..d4a819fb3 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -24,11 +24,11 @@ * This file is part of the TinyUSB stack. */ -#include "board.h" #include "drv_usb_hw.h" #include "drv_usb_dev.h" -#include "../board_api.h" +#include "bsp/board_api.h" +#include "board.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake new file mode 100644 index 000000000..5f4a3da8d --- /dev/null +++ b/hw/bsp/gd32vf103/family.cmake @@ -0,0 +1,119 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/gd/nuclei-sdk) +set(SOC_DIR ${SDK_DIR}/SoC/gd32vf103) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS GD32VF103 CACHE INTERNAL "") + +set(JLINK_IF jtag) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + message(FATAL_ERROR "LD_FILE_GNU is not defined") + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU + ${SOC_DIR}/Common/Source/GCC/startup_gd32vf103.S + ${SOC_DIR}/Common/Source/GCC/intexc_gd32vf103.S + ) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_gd32vf103.c + ${SOC_DIR}/Common/Source/Drivers/gd32vf103_rcu.c + ${SOC_DIR}/Common/Source/Drivers/gd32vf103_gpio.c + ${SOC_DIR}/Common/Source/Drivers/Usb/gd32vf103_usb_hw.c + ${SOC_DIR}/Common/Source/Drivers/gd32vf103_usart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/NMSIS/Core/Include + ${SOC_DIR}/Common/Include + ${SOC_DIR}/Common/Include/Usb + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + DOWNLOAD_MODE=DOWNLOAD_MODE_FLASHXIP + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC + -mcmodel=medlow + -mstrict-align + ) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${SOC_DIR}/Common/Source/Stubs/sbrk.c + ${SOC_DIR}/Common/Source/Stubs/close.c + ${SOC_DIR}/Common/Source/Stubs/isatty.c + ${SOC_DIR}/Common/Source/Stubs/fstat.c + ${SOC_DIR}/Common/Source/Stubs/lseek.c + ${SOC_DIR}/Common/Source/Stubs/read.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_GD32VF103 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/gd32vf103/family.mk b/hw/bsp/gd32vf103/family.mk index 1725559c4..28e48a6b5 100644 --- a/hw/bsp/gd32vf103/family.mk +++ b/hw/bsp/gd32vf103/family.mk @@ -9,7 +9,6 @@ CROSS_COMPILE ?= riscv-none-embed- # Submodules NUCLEI_SDK = hw/mcu/gd/nuclei-sdk -DEPS_SUBMODULES += $(NUCLEI_SDK) # Nuclei-SDK paths GD32VF103_SDK_SOC = $(NUCLEI_SDK)/SoC/gd32vf103 @@ -18,12 +17,9 @@ LIBC_STUBS = $(GD32VF103_SDK_SOC)/Common/Source/Stubs STARTUP_ASM = $(GD32VF103_SDK_SOC)/Common/Source/GCC include $(TOP)/$(BOARD_PATH)/board.mk - -SKIP_NANOLIB = 1 +CPU_CORE ?= rv32imac-ilp32 CFLAGS += \ - -march=rv32imac \ - -mabi=ilp32 \ -mcmodel=medlow \ -mstrict-align \ -nostdlib -nostartfiles \ @@ -35,10 +31,10 @@ CFLAGS += -Wno-error=unused-parameter SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ - $(GD32VF103_SDK_DRIVER)/gd32vf103_rcu.c \ $(GD32VF103_SDK_DRIVER)/gd32vf103_gpio.c \ - $(GD32VF103_SDK_DRIVER)/Usb/gd32vf103_usb_hw.c \ + $(GD32VF103_SDK_DRIVER)/gd32vf103_rcu.c \ $(GD32VF103_SDK_DRIVER)/gd32vf103_usart.c \ + $(GD32VF103_SDK_DRIVER)/Usb/gd32vf103_usb_hw.c \ $(LIBC_STUBS)/sbrk.c \ $(LIBC_STUBS)/close.c \ $(LIBC_STUBS)/isatty.c \ diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index dd0ef6d1b..b9dd8829e 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -34,7 +34,6 @@ function(add_board_target BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} # driver - ${SDK_DIR}/drivers/common/fsl_common_arm.c ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c ${SDK_DIR}/drivers/flexcomm/fsl_usart.c diff --git a/src/device/usbd.c b/src/device/usbd.c index e51aa0fc4..6aeaa699f 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -90,16 +90,16 @@ tu_static usbd_device_t _usbd_dev; // Class Driver //--------------------------------------------------------------------+ #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL - #define DRIVER_NAME(_name) .name = _name, + #define DRIVER_NAME(_name) _name #else - #define DRIVER_NAME(_name) + #define DRIVER_NAME(_name) NULL #endif // Built-in class drivers tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_CDC { - DRIVER_NAME("CDC") + .name = DRIVER_NAME("CDC"), .init = cdcd_init, .deinit = cdcd_deinit, .reset = cdcd_reset, @@ -112,7 +112,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_MSC { - DRIVER_NAME("MSC") + .name = DRIVER_NAME("MSC"), .init = mscd_init, .deinit = NULL, .reset = mscd_reset, @@ -125,7 +125,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_HID { - DRIVER_NAME("HID") + .name = DRIVER_NAME("HID"), .init = hidd_init, .deinit = hidd_deinit, .reset = hidd_reset, @@ -138,7 +138,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_AUDIO { - DRIVER_NAME("AUDIO") + .name = DRIVER_NAME("AUDIO"), .init = audiod_init, .deinit = audiod_deinit, .reset = audiod_reset, @@ -151,7 +151,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_VIDEO { - DRIVER_NAME("VIDEO") + .name = DRIVER_NAME("VIDEO"), .init = videod_init, .deinit = videod_deinit, .reset = videod_reset, @@ -164,7 +164,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_MIDI { - DRIVER_NAME("MIDI") + .name = DRIVER_NAME("MIDI"), .init = midid_init, .deinit = midid_deinit, .open = midid_open, @@ -177,7 +177,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_VENDOR { - DRIVER_NAME("VENDOR") + .name = DRIVER_NAME("VENDOR"), .init = vendord_init, .deinit = vendord_deinit, .reset = vendord_reset, @@ -190,7 +190,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_USBTMC { - DRIVER_NAME("TMC") + .name = DRIVER_NAME("TMC"), .init = usbtmcd_init_cb, .deinit = usbtmcd_deinit, .reset = usbtmcd_reset_cb, @@ -203,7 +203,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_DFU_RUNTIME { - DRIVER_NAME("DFU-RUNTIME") + .name = DRIVER_NAME("DFU-RUNTIME"), .init = dfu_rtd_init, .deinit = dfu_rtd_deinit, .reset = dfu_rtd_reset, @@ -216,7 +216,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_DFU { - DRIVER_NAME("DFU") + .name = DRIVER_NAME("DFU"), .init = dfu_moded_init, .deinit = dfu_moded_deinit, .reset = dfu_moded_reset, @@ -229,7 +229,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_ECM_RNDIS || CFG_TUD_NCM { - DRIVER_NAME("NET") + .name = DRIVER_NAME("NET"), .init = netd_init, .deinit = netd_deinit, .reset = netd_reset, @@ -242,7 +242,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_BTH { - DRIVER_NAME("BTH") + .name = DRIVER_NAME("BTH"), .init = btd_init, .deinit = btd_deinit, .reset = btd_reset, diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 47752f32c..7eb504246 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -23,8 +23,8 @@ * * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_USBD_PVT_H_ -#define _TUSB_USBD_PVT_H_ +#ifndef TUSB_USBD_PVT_H_ +#define TUSB_USBD_PVT_H_ #include "osal/osal.h" #include "common/tusb_fifo.h" @@ -40,10 +40,7 @@ //--------------------------------------------------------------------+ typedef struct { - #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL char const* name; - #endif - void (* init ) (void); bool (* deinit ) (void); void (* reset ) (uint8_t rhport); diff --git a/test/hil/hfp.json b/test/hil/hfp.json new file mode 100644 index 000000000..e79a3cfc9 --- /dev/null +++ b/test/hil/hfp.json @@ -0,0 +1,25 @@ +{ + "boards": [ + { + "name": "stm32l412nucleo", + "uid": "41003B000E504E5457323020", + "flasher": "jlink", + "flasher_sn": "774470029", + "flasher_args": "-device STM32L412KB" + }, + { + "name": "stm32f746disco", + "uid": "210041000C51343237303334", + "flasher": "jlink", + "flasher_sn": "770935966", + "flasher_args": "-device STM32F746NG" + }, + { + "name": "lpcxpresso43s67", + "uid": "08F000044528BAAA8D858F58C50700F5", + "flasher": "jlink", + "flasher_sn": "728973776", + "flasher_args": "-device LPC43S67_M4" + } + ] +} diff --git a/test/hil/hil_hfp.json b/test/hil/hil_hfp.json deleted file mode 100644 index e79a3cfc9..000000000 --- a/test/hil/hil_hfp.json +++ /dev/null @@ -1,25 +0,0 @@ -{ - "boards": [ - { - "name": "stm32l412nucleo", - "uid": "41003B000E504E5457323020", - "flasher": "jlink", - "flasher_sn": "774470029", - "flasher_args": "-device STM32L412KB" - }, - { - "name": "stm32f746disco", - "uid": "210041000C51343237303334", - "flasher": "jlink", - "flasher_sn": "770935966", - "flasher_args": "-device STM32F746NG" - }, - { - "name": "lpcxpresso43s67", - "uid": "08F000044528BAAA8D858F58C50700F5", - "flasher": "jlink", - "flasher_sn": "728973776", - "flasher_args": "-device LPC43S67_M4" - } - ] -} diff --git a/test/hil/hil_pi4.json b/test/hil/hil_pi4.json deleted file mode 100644 index 8aff81910..000000000 --- a/test/hil/hil_pi4.json +++ /dev/null @@ -1,37 +0,0 @@ -{ - "boards": [ - { - "name": "raspberry_pi_pico", - "uid": "E6614C311B764A37", - "flasher": "openocd", - "flasher_sn": "E6614103E72C1D2F", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" - }, - { - "name": "espressif_s3_devkitm", - "uid": "84F703C084E4", - "tests": [ - "cdc_msc_freertos", "hid_composite_freertos" - ], - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 1500000" - }, - { - "name": "feather_nrf52840_express", - "uid": "1F0479CD0F764471", - "flasher": "jlink", - "flasher_sn": "000682804350", - "flasher_args": "-device nrf52840_xxaa" - }, - { - "name": "itsybitsy_m4", - "uid": "D784B28C5338533335202020FF044726", - "flasher": "bossac", - "flashser_vendor": "Adafruit Industries", - "flasher_product": "ItsyBitsy M4 Express", - "flasher_reset_pin": "2", - "flasher_args": "--offset 0x4000" - } - ] -} diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 7f03ce43f..dffb81765 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -33,12 +33,14 @@ import serial import subprocess import json import glob +import platform # for RPI double reset -try: - import gpiozero -except ImportError: - pass +if platform.machine() == 'aarch64': + try: + import gpiozero + except ImportError: + pass ENUM_TIMEOUT = 10 @@ -111,27 +113,39 @@ def read_disk_file(id, fname): # ------------------------------------------------------------- # Flashing firmware # ------------------------------------------------------------- +def run_cmd(cmd): + # print(cmd) + r = subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + title = 'command error' + if r.returncode != 0: + # print build output if failed + if os.getenv('CI'): + print(f"::group::{title}") + print(r.stdout.decode("utf-8")) + print(f"::endgroup::") + else: + print(title) + print(r.stdout.decode("utf-8")) + return r + + def flash_jlink(board, firmware): - script = ['halt', 'r', f'loadfile {firmware}', 'r', 'go', 'exit'] + script = ['halt', 'r', f'loadfile {firmware}.elf', 'r', 'go', 'exit'] with open('flash.jlink', 'w') as f: f.writelines(f'{s}\n' for s in script) - ret = subprocess.run( - f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink') os.remove('flash.jlink') return ret def flash_openocd(board, firmware): - ret = subprocess.run( - f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware} reset exit"', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware}.elf reset exit"') return ret def flash_esptool(board, firmware): port = get_serial_dev(board["flasher_sn"], None, None, 0) - dir = os.path.dirname(firmware) + dir = os.path.dirname(f'{firmware}.bin') with open(f'{dir}/config.env') as f: IDF_TARGET = json.load(f)['IDF_TARGET'] with open(f'{dir}/flash_args') as f: @@ -154,9 +168,11 @@ def doublereset_with_rpi_gpio(board): time.sleep(0.1) led.on() + def flash_bossac(board, firmware): # double reset to enter bootloader - doublereset_with_rpi_gpio(board) + if platform.machine() == 'aarch64': + doublereset_with_rpi_gpio(board) port = get_serial_dev(board["uid"], board["flashser_vendor"], board["flasher_product"], 0) timeout = ENUM_TIMEOUT @@ -169,8 +185,7 @@ def flash_bossac(board, firmware): assert timeout, 'bossac bootloader is not available' # sleep a bit more for bootloader to be ready time.sleep(0.5) - ret = subprocess.run(f'bossac --port {port} {board["flasher_args"]} -U -i -R -e -w {firmware}', shell=True, stdout=subprocess.PIPE, - stderr=subprocess.STDOUT) + ret = run_cmd(f'bossac --port {port} {board["flasher_args"]} -U -i -R -e -w {firmware}.bin') return ret # ------------------------------------------------------------- @@ -325,7 +340,8 @@ def main(config_file, board): config_boards = [e for e in config['boards'] if e['name'] in board] for item in config_boards: - print(f'Testing board:{item["name"]}') + name = item['name'] + print(f'Testing board:{name}') flasher = item['flasher'].lower() # default to all tests @@ -344,29 +360,12 @@ def main(config_file, board): test_list.remove(skip) for test in test_list: - fw_list = [ - # cmake: esp32 & samd51 use .bin file - f'cmake-build/cmake-build-{item["name"]}/device/{test}/{test}.elf', - f'cmake-build/cmake-build-{item["name"]}/device/{test}/{test}.bin', - # make - f'examples/device/{test}/_build/{item["name"]}/{test}.elf' - ] - - fw = None - for f in fw_list: - if os.path.isfile(f): - fw = f - break - - if fw is None: - print(f'Cannot find binary file for {test}') - sys.exit(-1) - + fw_name = f'cmake-build/cmake-build-{name}/device/{test}/{test}' print(f' {test} ...', end='') # flash firmware. It may fail randomly, retry a few times for i in range(3): - ret = globals()[f'flash_{flasher}'](item, fw) + ret = globals()[f'flash_{flasher}'](item, fw_name) if ret.returncode == 0: break else: diff --git a/test/hil/pi4.json b/test/hil/pi4.json new file mode 100644 index 000000000..04329bb64 --- /dev/null +++ b/test/hil/pi4.json @@ -0,0 +1,27 @@ +{ + "boards": [ + { + "name": "raspberry_pi_pico", + "uid": "E6614C311B764A37", + "flasher": "openocd", + "flasher_sn": "E6614103E72C1D2F", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" + }, + { + "name": "feather_nrf52840_express", + "uid": "1F0479CD0F764471", + "flasher": "jlink", + "flasher_sn": "000682804350", + "flasher_args": "-device nrf52840_xxaa" + }, + { + "name": "itsybitsy_m4", + "uid": "D784B28C5338533335202020FF044726", + "flasher": "bossac", + "flashser_vendor": "Adafruit Industries", + "flasher_product": "ItsyBitsy M4 Express", + "flasher_reset_pin": "2", + "flasher_args": "--offset 0x4000" + } + ] +} diff --git a/test/hil/pi4_esp32.json b/test/hil/pi4_esp32.json new file mode 100644 index 000000000..c95dd2d4e --- /dev/null +++ b/test/hil/pi4_esp32.json @@ -0,0 +1,14 @@ +{ + "boards": [ + { + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", + "tests": [ + "cdc_msc_freertos", "hid_composite_freertos" + ], + "flasher": "esptool", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "flasher_args": "-b 1500000" + } + ] +} diff --git a/tools/build.py b/tools/build.py new file mode 100644 index 000000000..884cd56f4 --- /dev/null +++ b/tools/build.py @@ -0,0 +1,177 @@ +import os +import sys +import time +import subprocess +import click +from pathlib import Path +from multiprocessing import Pool + +import build_utils + +SUCCEEDED = "\033[32msucceeded\033[0m" +FAILED = "\033[31mfailed\033[0m" + +build_separator = '-' * 106 + + +def run_cmd(cmd): + #print(cmd) + r = subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + title = 'command error' + if r.returncode != 0: + # print build output if failed + if os.getenv('CI'): + print(f"::group::{title}") + print(r.stdout.decode("utf-8")) + print(f"::endgroup::") + else: + print(title) + print(r.stdout.decode("utf-8")) + return r + +def find_family(board): + bsp_dir = Path("hw/bsp") + for family_dir in bsp_dir.iterdir(): + if family_dir.is_dir(): + board_dir = family_dir / 'boards' / board + if board_dir.exists(): + return family_dir.name + return None + + +def get_examples(family): + all_examples = [] + for d in os.scandir("examples"): + if d.is_dir() and 'cmake' not in d.name and 'build_system' not in d.name: + for entry in os.scandir(d.path): + if entry.is_dir() and 'cmake' not in entry.name: + if family != 'espressif' or 'freertos' in entry.name: + all_examples.append(d.name + '/' + entry.name) + + if family == 'espressif': + all_examples.append('device/board_test') + all_examples.append('device/video_capture') + all_examples.sort() + return all_examples + + +def build_board_cmake(board, toolchain): + start_time = time.monotonic() + ret = [0, 0, 0] + + build_dir = f"cmake-build/cmake-build-{board}" + family = find_family(board) + if family == 'espressif': + # for espressif, we have to build example individually + all_examples = get_examples(family) + for example in all_examples: + r = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G "Ninja" -DBOARD={board} -DMAX3421_HOST=1') + if r.returncode == 0: + r = run_cmd(f'cmake --build {build_dir}/{example}') + if r.returncode == 0: + ret[0] += 1 + else: + ret[1] += 1 + else: + r = run_cmd(f'cmake examples -B {build_dir} -G "Ninja" -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel -DTOOLCHAIN={toolchain}') + if r.returncode == 0: + r = run_cmd(f"cmake --build {build_dir}") + if r.returncode == 0: + ret[0] += 1 + else: + ret[1] += 1 + + duration = time.monotonic() - start_time + + if ret[1] == 0: + status = SUCCEEDED + else: + status = FAILED + + flash_size = "-" + sram_size = "-" + example = 'all' + title = build_utils.build_format.format(example, board, status, "{:.2f}s".format(duration), flash_size, sram_size) + print(title) + return ret + + +def build_family(family, toolchain, build_system): + all_boards = [] + for entry in os.scandir(f"hw/bsp/{family}/boards"): + if entry.is_dir() and entry.name != 'pico_sdk': + all_boards.append(entry.name) + all_boards.sort() + + # success, failed, skipped + ret = [0, 0, 0] + if build_system == 'cmake': + for board in all_boards: + if build_board_cmake(board, toolchain): + ret[0] += 1 + else: + ret[1] += 1 + elif build_system == 'make': + all_examples = get_examples(family) + for example in all_examples: + with Pool(processes=os.cpu_count()) as pool: + pool_args = list((map(lambda b, e=example, o=f"TOOLCHAIN={toolchain}": [e, b, o], all_boards))) + r = pool.starmap(build_utils.build_example, pool_args) + # sum all element of same index (column sum) + rsum = list(map(sum, list(zip(*r)))) + ret[0] += rsum[0] + ret[1] += rsum[1] + ret[2] += rsum[2] + return ret + + +@click.command() +@click.argument('families', nargs=-1, required=False) +@click.option('-b', '--board', multiple=True, default=None, help='Boards to build') +@click.option('-t', '--toolchain', default='gcc', help='Toolchain to use, default is gcc') +@click.option('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') +def main(families, board, toolchain, build_system): + if len(families) == 0 and len(board) == 0: + print("Please specify families or board to build") + return 1 + + print(build_separator) + print(build_utils.build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) + total_time = time.monotonic() + total_result = [0, 0, 0] + + # build families: cmake, make + if families is not None: + all_families = [] + if 'all' in families: + for entry in os.scandir("hw/bsp"): + if entry.is_dir() and entry.name != 'espressif' and os.path.isfile(entry.path + "/family.cmake"): + all_families.append(entry.name) + else: + all_families = list(families) + all_families.sort() + + # succeeded, failed + for f in all_families: + fret = build_family(f, toolchain, build_system) + total_result[0] += fret[0] + total_result[1] += fret[1] + total_result[2] += fret[2] + + # build board (only cmake) + if board is not None: + for b in board: + r = build_board_cmake(b, toolchain) + total_result[0] += r[0] + total_result[1] += r[1] + total_result[2] += r[2] + + total_time = time.monotonic() - total_time + print(build_separator) + print(f"Build Summary: {total_result[0]} {SUCCEEDED}, {total_result[1]} {FAILED} and took {total_time:.2f}s") + print(build_separator) + return total_result[1] + + +if __name__ == '__main__': + sys.exit(main()) diff --git a/tools/build_board.py b/tools/build_board.py deleted file mode 100644 index 13376d126..000000000 --- a/tools/build_board.py +++ /dev/null @@ -1,69 +0,0 @@ -import os -import sys -import time -import subprocess -from multiprocessing import Pool - -import build_utils - -SUCCEEDED = "\033[32msucceeded\033[0m" -FAILED = "\033[31mfailed\033[0m" -SKIPPED = "\033[33mskipped\033[0m" - -build_separator = '-' * 106 - - -def filter_with_input(mylist): - if len(sys.argv) > 1: - input_args = list(set(mylist).intersection(sys.argv)) - if len(input_args) > 0: - mylist[:] = input_args - - -if __name__ == '__main__': - # If examples are not specified in arguments, build all - all_examples = [] - for dir1 in os.scandir("examples"): - if dir1.is_dir(): - for entry in os.scandir(dir1.path): - if entry.is_dir(): - all_examples.append(dir1.name + '/' + entry.name) - filter_with_input(all_examples) - all_examples.sort() - - # If boards are not specified in arguments, build all - all_boards = [] - for entry in os.scandir("hw/bsp"): - if entry.is_dir() and os.path.exists(entry.path + "/board.mk"): - all_boards.append(entry.name) - filter_with_input(all_boards) - all_boards.sort() - - # Get dependencies - for b in all_boards: - subprocess.run("make -C examples/device/board_test BOARD={} get-deps".format(b), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - - print(build_separator) - print(build_utils.build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) - total_time = time.monotonic() - - # succeeded, failed, skipped - total_result = [0, 0, 0] - for example in all_examples: - print(build_separator) - with Pool(processes=os.cpu_count()) as pool: - pool_args = list((map(lambda b, e=example, o='': [e, b, o], all_boards))) - result = pool.starmap(build_utils.build_example, pool_args) - # sum all element of same index (column sum) - result = list(map(sum, list(zip(*result)))) - - # add to total result - total_result = list(map(lambda x, y: x + y, total_result, result)) - - total_time = time.monotonic() - total_time - print(build_separator) - print("Build Summary: {} {}, {} {}, {} {} and took {:.2f}s".format(total_result[0], SUCCEEDED, total_result[1], - FAILED, total_result[2], SKIPPED, total_time)) - print(build_separator) - - sys.exit(total_result[1]) diff --git a/tools/build_cmake.py b/tools/build_cmake.py deleted file mode 100644 index 2eda3f90f..000000000 --- a/tools/build_cmake.py +++ /dev/null @@ -1,105 +0,0 @@ -import os -import sys -import time -import subprocess -import pathlib -from multiprocessing import Pool - -import build_utils - -SUCCEEDED = "\033[32msucceeded\033[0m" -FAILED = "\033[31mfailed\033[0m" -SKIPPED = "\033[33mskipped\033[0m" - -build_separator = '-' * 106 - -def filter_with_input(mylist): - if len(sys.argv) > 1: - input_args = list(set(mylist).intersection(sys.argv)) - if len(input_args) > 0: - mylist[:] = input_args - - -def build_family(family, cmake_option): - all_boards = [] - for entry in os.scandir("hw/bsp/{}/boards".format(family)): - if entry.is_dir() and entry.name != 'pico_sdk': - all_boards.append(entry.name) - all_boards.sort() - - # success, failed, skipped - ret = [0, 0, 0] - for board in all_boards: - start_time = time.monotonic() - - build_dir = f"cmake-build/cmake-build-{board}" - - # Generate build - r = subprocess.run(f"cmake examples -B {build_dir} -G \"Ninja\" -DFAMILY={family} -DBOARD" - f"={board} -DCMAKE_BUILD_TYPE=MinSizeRel {cmake_option}", shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - - # Build - if r.returncode == 0: - r = subprocess.run(f"cmake --build {build_dir}", shell=True, stdout=subprocess.PIPE, - stderr=subprocess.STDOUT) - - duration = time.monotonic() - start_time - - if r.returncode == 0: - status = SUCCEEDED - ret[0] += 1 - else: - status = FAILED - ret[1] += 1 - - flash_size = "-" - sram_size = "-" - example = 'all' - title = build_utils.build_format.format(example, board, status, "{:.2f}s".format(duration), flash_size, sram_size) - - if os.getenv('CI'): - # always print build output if in CI - print(f"::group::{title}") - print(r.stdout.decode("utf-8")) - print(f"::endgroup::") - else: - # print build output if failed - print(title) - if r.returncode != 0: - print(r.stdout.decode("utf-8")) - - return ret - - -if __name__ == '__main__': - cmake_options = '' - for a in sys.argv[1:]: - if a.startswith('-'): - cmake_options += ' ' + a - - # If family are not specified in arguments, build all supported - all_families = [] - for entry in os.scandir("hw/bsp"): - if entry.is_dir() and entry.name != 'espressif' and os.path.isfile(entry.path + "/family.cmake"): - all_families.append(entry.name) - filter_with_input(all_families) - all_families.sort() - - print(build_separator) - print(build_utils.build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) - total_time = time.monotonic() - - # succeeded, failed, skipped - total_result = [0, 0, 0] - for family in all_families: - fret = build_family(family, cmake_options) - if len(fret) == len(total_result): - total_result = [total_result[i] + fret[i] for i in range(len(fret))] - - total_time = time.monotonic() - total_time - print(build_separator) - print("Build Summary: {} {}, {} {}, {} {} and took {:.2f}s".format(total_result[0], SUCCEEDED, total_result[1], - FAILED, total_result[2], SKIPPED, total_time)) - print(build_separator) - - sys.exit(total_result[1]) diff --git a/tools/build_make.py b/tools/build_make.py deleted file mode 100644 index 240fc8d64..000000000 --- a/tools/build_make.py +++ /dev/null @@ -1,80 +0,0 @@ -import os -import sys -import time -from multiprocessing import Pool - -import build_utils - -SUCCEEDED = "\033[32msucceeded\033[0m" -FAILED = "\033[31mfailed\033[0m" -SKIPPED = "\033[33mskipped\033[0m" - -build_separator = '-' * 106 - - -def filter_with_input(mylist): - if len(sys.argv) > 1: - input_args = list(set(mylist).intersection(sys.argv)) - if len(input_args) > 0: - mylist[:] = input_args - - -def build_family(example, family, make_option): - all_boards = [] - for entry in os.scandir("hw/bsp/{}/boards".format(family)): - if entry.is_dir() and entry.name != 'pico_sdk': - all_boards.append(entry.name) - filter_with_input(all_boards) - all_boards.sort() - - with Pool(processes=os.cpu_count()) as pool: - pool_args = list((map(lambda b, e=example, o=make_option: [e, b, o], all_boards))) - result = pool.starmap(build_utils.build_example, pool_args) - # sum all element of same index (column sum) - return list(map(sum, list(zip(*result)))) - - -if __name__ == '__main__': - make_option = '' - for a in sys.argv: - if 'TOOLCHAIN=' in sys.argv: - make_option += ' ' + a - - # If examples are not specified in arguments, build all - all_examples = [] - for d in os.scandir("examples"): - if d.is_dir() and 'cmake' not in d.name and 'build_system' not in d.name: - for entry in os.scandir(d.path): - if entry.is_dir() and 'cmake' not in entry.name: - all_examples.append(d.name + '/' + entry.name) - filter_with_input(all_examples) - all_examples.sort() - - # If family are not specified in arguments, build all - all_families = [] - for entry in os.scandir("hw/bsp"): - if entry.is_dir() and os.path.isdir(entry.path + "/boards") and entry.name != 'espressif': - all_families.append(entry.name) - filter_with_input(all_families) - all_families.sort() - - print(build_separator) - print(build_utils.build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) - total_time = time.monotonic() - - # succeeded, failed, skipped - total_result = [0, 0, 0] - for example in all_examples: - print(build_separator) - for family in all_families: - fret = build_family(example, family, make_option) - if len(fret) == len(total_result): - total_result = [total_result[i] + fret[i] for i in range(len(fret))] - - total_time = time.monotonic() - total_time - print(build_separator) - print("Build Summary: {} {}, {} {}, {} {} and took {:.2f}s".format(total_result[0], SUCCEEDED, total_result[1], - FAILED, total_result[2], SKIPPED, total_time)) - print(build_separator) - - sys.exit(total_result[1]) diff --git a/tools/get_deps.py b/tools/get_deps.py index cdb5dafe1..bca38fc80 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -1,3 +1,4 @@ +import click import sys import subprocess from pathlib import Path @@ -227,27 +228,46 @@ def get_a_dep(d): return 0 -# Arguments can be -# - family name -# - specific deps path -# - all -if __name__ == "__main__": +def find_family(board): + bsp_dir = Path(TOP / "hw/bsp") + for family_dir in bsp_dir.iterdir(): + if family_dir.is_dir(): + board_dir = family_dir / 'boards' / board + if board_dir.exists(): + return family_dir.name + return None + + +@click.command() +@click.argument('family', nargs=-1, required=False) +@click.option('-b', '--board', multiple=True, default=None, help='Boards to fetch') +def main(family, board): + if len(family) == 0 and len(board) == 0: + print("Please specify family or board to fetch") + return + status = 0 deps = list(deps_mandatory.keys()) - # get all if 'all' is argument - if len(sys.argv) == 2 and sys.argv[1] == 'all': + + if 'all' in family: deps += deps_optional.keys() else: - for arg in sys.argv[1:]: - if arg in deps_all.keys(): - # if arg is a dep, add it - deps.append(arg) - else: - # arg is a family name, add all deps of that family - for d in deps_optional: - if arg in deps_optional[d][2]: - deps.append(d) + family = list(family) + if board is not None: + for b in board: + f = find_family(b) + if f is not None: + family.append(f) + + for f in family: + for d in deps_optional: + if f in deps_optional[d][2]: + deps.append(d) with Pool() as pool: status = sum(pool.map(get_a_dep, deps)) - sys.exit(status) + return status + + +if __name__ == "__main__": + sys.exit(main()) -- cgit v1.3.1 From 2a67ce773dcd68f7f8c4c07fce2e6e4f7947e03d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 May 2024 20:13:00 +0700 Subject: change default risv-gcc to riscv-none-elf- and add _zicsr extension add cmake for ch32v20x, skip freertos examples for CH32V20X, also skip net webserver due to lack of RAM update to use openocd with wlinke adapter --- .github/workflows/ci_set_matrix.py | 4 +- .idea/cmake.xml | 4 +- examples/build_system/cmake/cpu/rv32i-ilp32.cmake | 4 +- .../build_system/cmake/cpu/rv32imac-ilp32.cmake | 4 +- .../build_system/cmake/toolchain/riscv_gcc.cmake | 19 +++- examples/build_system/make/cpu/rv32i-ilp32.mk | 11 ++- examples/build_system/make/cpu/rv32imac-ilp32.mk | 10 +- .../device/audio_4_channel_mic_freertos/skip.txt | 1 + examples/device/audio_test_freertos/skip.txt | 1 + examples/device/net_lwip_webserver/skip.txt | 1 + examples/device/video_capture_2ch/skip.txt | 1 + hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake | 7 ++ hw/bsp/ch32v20x/family.cmake | 109 +++++++++++++++++++++ hw/bsp/ch32v20x/family.mk | 17 ++-- hw/bsp/ch32v20x/wch-riscv.cfg | 1 - hw/bsp/ch32v307/family.cmake | 1 - hw/bsp/ch32v307/family.mk | 8 +- hw/bsp/ch32v307/wch-riscv.cfg | 16 +-- hw/bsp/family_support.cmake | 1 + hw/bsp/fomu/family.mk | 6 +- hw/bsp/gd32vf103/family.mk | 7 +- src/portable/wch/dcd_ch32_usbfs.c | 8 ++ 22 files changed, 191 insertions(+), 50 deletions(-) create mode 100644 hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake create mode 100644 hw/bsp/ch32v20x/family.cmake (limited to 'examples/build_system') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 62239c9ad..c6f4e8fe2 100644 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -7,14 +7,14 @@ toolchain_list = { "arm-iar": "", "arm-gcc": "", "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", - "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz", + "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz" } # family: [supported toolchain] family_list = { "broadcom_32bit": ["arm-gcc"], "broadcom_64bit": ["aarch64-gcc"], - "ch32v307 fomu gd32vf103": ["riscv-gcc"], + "ch32v20x ch32v307 fomu gd32vf103": ["riscv-gcc"], "imxrt": ["arm-gcc", "arm-clang"], "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], "lpc11 lpc13 lpc15": ["arm-gcc", "arm-clang"], diff --git a/.idea/cmake.xml b/.idea/cmake.xml index bb13a0466..a34f19e1f 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -66,6 +66,7 @@ + @@ -103,6 +104,7 @@ + @@ -120,7 +122,6 @@ - @@ -130,6 +131,7 @@ + \ No newline at end of file diff --git a/examples/build_system/cmake/cpu/rv32i-ilp32.cmake b/examples/build_system/cmake/cpu/rv32i-ilp32.cmake index b4889e6ff..605c40ba1 100644 --- a/examples/build_system/cmake/cpu/rv32i-ilp32.cmake +++ b/examples/build_system/cmake/cpu/rv32i-ilp32.cmake @@ -1,13 +1,13 @@ if (TOOLCHAIN STREQUAL "gcc") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32i + -march=rv32i_zicsr -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") elseif (TOOLCHAIN STREQUAL "clang") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32i + -march=rv32i_zicsr -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") diff --git a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake index dd1bc0af7..584d90519 100644 --- a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake +++ b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake @@ -1,13 +1,13 @@ if (TOOLCHAIN STREQUAL "gcc") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32imac + -march=rv32imac_zicsr -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") elseif (TOOLCHAIN STREQUAL "clang") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32imac + -march=rv32imac_zicsr -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") diff --git a/examples/build_system/cmake/toolchain/riscv_gcc.cmake b/examples/build_system/cmake/toolchain/riscv_gcc.cmake index 904b27294..d788df023 100644 --- a/examples/build_system/cmake/toolchain/riscv_gcc.cmake +++ b/examples/build_system/cmake/toolchain/riscv_gcc.cmake @@ -1,15 +1,24 @@ +# default Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +if (NOT DEFINED CROSS_COMPILE) + set(CROSS_COMPILE "riscv-none-elf-") +endif () + +if (NOT DEFINED CMAKE_C_COMPILER) + set(CMAKE_C_COMPILER ${CROSS_COMPILE}gcc) +endif () + if (NOT DEFINED CMAKE_C_COMPILER) - set(CMAKE_C_COMPILER "riscv-none-embed-gcc") + set(CMAKE_C_COMPILER ${CROSS_COMPILE}gcc) endif () if (NOT DEFINED CMAKE_CXX_COMPILER) - set(CMAKE_CXX_COMPILER "riscv-none-embed-g++") + set(CMAKE_CXX_COMPILER ${CROSS_COMPILE}g++) endif () set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) -set(CMAKE_SIZE "riscv-none-embed-size" CACHE FILEPATH "") -set(CMAKE_OBJCOPY "riscv-none-embed-objcopy" CACHE FILEPATH "") -set(CMAKE_OBJDUMP "riscv-none-embed-objdump" CACHE FILEPATH "") +set(CMAKE_SIZE ${CROSS_COMPILE}size CACHE FILEPATH "") +set(CMAKE_OBJCOPY ${CROSS_COMPILE}objcopy CACHE FILEPATH "") +set(CMAKE_OBJDUMP ${CROSS_COMPILE}objdump CACHE FILEPATH "") include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) diff --git a/examples/build_system/make/cpu/rv32i-ilp32.mk b/examples/build_system/make/cpu/rv32i-ilp32.mk index a465baf4c..af764afc5 100644 --- a/examples/build_system/make/cpu/rv32i-ilp32.mk +++ b/examples/build_system/make/cpu/rv32i-ilp32.mk @@ -1,12 +1,15 @@ ifeq ($(TOOLCHAIN),gcc) CFLAGS += \ - -march=rv32i \ + -march=rv32i_zicsr \ -mabi=ilp32 \ -else ifeq ($(TOOLCHAIN),iar) - #CFLAGS += --cpu cortex-a53 - #ASFLAGS += --cpu cortex-a53 +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + -march=rv32i_zicsr \ + -mabi=ilp32 \ +else ifeq ($(TOOLCHAIN),iar) + $(error not support) endif # For freeRTOS port source diff --git a/examples/build_system/make/cpu/rv32imac-ilp32.mk b/examples/build_system/make/cpu/rv32imac-ilp32.mk index 2b6493e48..19c322ebc 100644 --- a/examples/build_system/make/cpu/rv32imac-ilp32.mk +++ b/examples/build_system/make/cpu/rv32imac-ilp32.mk @@ -1,11 +1,15 @@ ifeq ($(TOOLCHAIN),gcc) CFLAGS += \ - -march=rv32imac \ + -march=rv32imac_zicsr \ + -mabi=ilp32 \ + +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + -march=rv32imac_zicsr \ -mabi=ilp32 \ else ifeq ($(TOOLCHAIN),iar) - #CFLAGS += --cpu cortex-a53 - #ASFLAGS += --cpu cortex-a53 + $(error not support) endif diff --git a/examples/device/audio_4_channel_mic_freertos/skip.txt b/examples/device/audio_4_channel_mic_freertos/skip.txt index 0b689192d..4769af009 100644 --- a/examples/device/audio_4_channel_mic_freertos/skip.txt +++ b/examples/device/audio_4_channel_mic_freertos/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:CH32V307 mcu:CXD56 mcu:F1C100S diff --git a/examples/device/audio_test_freertos/skip.txt b/examples/device/audio_test_freertos/skip.txt index a6f96b288..6aaa27661 100644 --- a/examples/device/audio_test_freertos/skip.txt +++ b/examples/device/audio_test_freertos/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:CH32V307 mcu:CXD56 mcu:F1C100S diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 43cdab71a..51af58667 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:LPC11UXX mcu:LPC13XX mcu:LPC15XX diff --git a/examples/device/video_capture_2ch/skip.txt b/examples/device/video_capture_2ch/skip.txt index 86697899b..1786297f9 100644 --- a/examples/device/video_capture_2ch/skip.txt +++ b/examples/device/video_capture_2ch/skip.txt @@ -2,6 +2,7 @@ mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 mcu:GD32VF103 +mcu:CH32V20X mcu:CH32V307 mcu:STM32L0 family:espressif diff --git a/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake b/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake new file mode 100644 index 000000000..2699f3e15 --- /dev/null +++ b/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake @@ -0,0 +1,7 @@ +set(MCU_VARIANT D6) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CH32V20x_D6 + ) +endfunction() diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake new file mode 100644 index 000000000..fb39e3630 --- /dev/null +++ b/hw/bsp/ch32v20x/family.cmake @@ -0,0 +1,109 @@ +include_guard() + +set(CH32_FAMILY ch32v20x) +set(SDK_DIR ${TOP}/hw/mcu/wch/${CH32_FAMILY}/EVT/EXAM/SRC) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS CH32V20X CACHE INTERNAL "") +set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${SDK_DIR}/Ld/Link.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_${CH32_FAMILY}_${MCU_VARIANT}.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/Core/core_riscv.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/Peripheral/inc + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC + -mcmodel=medany + ) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_openocd_wch(${TARGET}) +endfunction() diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 2d94f19fb..7e290bb18 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -1,3 +1,9 @@ +# https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable +#CROSS_COMPILE ?= riscv32-unknown-elf- + +# Toolchain from https://nucleisys.com/download.php +#CROSS_COMPILE ?= riscv-nuclei-elf- + # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack CROSS_COMPILE ?= riscv-none-elf- @@ -9,23 +15,21 @@ DEPS_SUBMODULES += $(CH32V20X_SDK) CH32V20X_SDK_SRC = $(CH32V20X_SDK)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= rv32imac-ilp32 CFLAGS += \ - -march=rv32imac_zicsr \ - -mabi=ilp32 \ -mcmodel=medany \ -ffunction-sections \ -fdata-sections \ -ffat-lto-objects \ -flto \ - -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_CH32V20X \ -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED \ LDFLAGS_GCC += \ -Wl,--gc-sections \ - -specs=nosys.specs \ - -specs=nano.specs \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs \ LD_FILE = $(CH32V20X_SDK_SRC)/Ld/Link.ld @@ -46,5 +50,6 @@ FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V # wch-link is not supported yet in official openOCD yet. We need to either use # 1. download openocd as part of mounriver studio http://www.mounriver.com/download or # 2. compiled from modified source https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz +OPENOCD ?= $(HOME)/app/riscv-openocd-wch/src/openocd flash: $(BUILD)/$(PROJECT).elf - openocd -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "flash write_image $<" -c reset -c exit + $(OPENOCD) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "flash write_image $<" -c reset -c exit diff --git a/hw/bsp/ch32v20x/wch-riscv.cfg b/hw/bsp/ch32v20x/wch-riscv.cfg index 56a18d77e..aa35aa9c5 100644 --- a/hw/bsp/ch32v20x/wch-riscv.cfg +++ b/hw/bsp/ch32v20x/wch-riscv.cfg @@ -1,4 +1,3 @@ -#interface wlink adapter driver wlinke adapter speed 6000 transport select sdi diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index 87a0f2eba..fb478d387 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -11,7 +11,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") -set(OPENOCD_OPTION2 "-c wlink_reset_resume") #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 7232bfa08..df9ded4a0 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -1,11 +1,11 @@ # https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable #CROSS_COMPILE ?= riscv32-unknown-elf- -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE ?= riscv-none-embed- +# Toolchain from https://nucleisys.com/download.php +#CROSS_COMPILE ?= riscv-nuclei-elf- # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack -#CROSS_COMPILE ?= riscv-none-elf- +CROSS_COMPILE ?= riscv-none-elf- # Submodules CH32V307_SDK = hw/mcu/wch/ch32v307 @@ -16,8 +16,6 @@ CH32V307_SDK_SRC = $(CH32V307_SDK)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 -# -march=rv32imac_zicsr - CFLAGS += \ -flto \ -msmall-data-limit=8 \ diff --git a/hw/bsp/ch32v307/wch-riscv.cfg b/hw/bsp/ch32v307/wch-riscv.cfg index 0d24d16ca..aa35aa9c5 100644 --- a/hw/bsp/ch32v307/wch-riscv.cfg +++ b/hw/bsp/ch32v307/wch-riscv.cfg @@ -1,13 +1,15 @@ -#interface wlink -adapter driver wlink -wlink_set -set _CHIPNAME riscv -jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME -$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1 +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index df4f616ef..6eef5b88b 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -440,6 +440,7 @@ function(family_flash_openocd TARGET) endfunction() # Add flash openocd-wch target +# compiled from https://github.com/hathach/riscv-openocd-wch or https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz function(family_flash_openocd_wch TARGET) if (NOT DEFINED OPENOCD) set(OPENOCD $ENV{HOME}/app/riscv-openocd-wch/src/openocd) diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index 78f20d7db..69a546964 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -1,9 +1,5 @@ -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE = riscv-none-embed- - # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack -# CROSS_COMPILE = riscv-none-elf- -# -march=rv32i_zicsr +CROSS_COMPILE = riscv-none-elf- CPU_CORE ?= rv32i-ilp32 diff --git a/hw/bsp/gd32vf103/family.mk b/hw/bsp/gd32vf103/family.mk index 646564eae..48588886c 100644 --- a/hw/bsp/gd32vf103/family.mk +++ b/hw/bsp/gd32vf103/family.mk @@ -4,11 +4,8 @@ # Toolchain from https://nucleisys.com/download.php #CROSS_COMPILE ?= riscv-nuclei-elf- -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE ?= riscv-none-embed- - # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack -# CROSS_COMPILE ?= riscv-none-elf- +CROSS_COMPILE ?= riscv-none-elf- # Submodules NUCLEI_SDK = hw/mcu/gd/nuclei-sdk @@ -22,8 +19,6 @@ STARTUP_ASM = $(GD32VF103_SDK_SOC)/Common/Source/GCC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 -# -march=rv32imac_zicsr - CFLAGS += \ -mcmodel=medlow \ -mstrict-align \ diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 256c46696..83f625e21 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -201,6 +201,14 @@ void dcd_disconnect(uint8_t rhport) { USBOTG_FS->BASE_CTRL &= ~USBFS_CTRL_DEV_PUEN; } +void dcd_sof_enable(uint8_t rhport, bool en) +{ + (void) rhport; + (void) en; + + // TODO implement later +} + void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { (void) rhport; if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && -- cgit v1.3.1 From b19295c1c15de676e7cebd5bd5b6aa53887c6a56 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 20 May 2024 17:26:04 +0700 Subject: use correct wch usbhs, usbfs for ch32v307 using CFG_TUD_MAX_SPEED --- examples/build_system/make/rules.mk | 11 ++++++ hw/bsp/ch32v20x/family.mk | 10 +---- hw/bsp/ch32v307/family.c | 77 ++++++++++++------------------------- hw/bsp/ch32v307/family.cmake | 27 +++++++------ hw/bsp/ch32v307/family.mk | 61 +++++++++++++---------------- src/common/tusb_mcu.h | 16 ++++++-- src/portable/wch/ch32_usbhs_reg.h | 4 +- src/portable/wch/dcd_ch32_usbfs.c | 3 +- src/portable/wch/dcd_ch32_usbhs.c | 6 +-- 9 files changed, 98 insertions(+), 117 deletions(-) (limited to 'examples/build_system') diff --git a/examples/build_system/make/rules.mk b/examples/build_system/make/rules.mk index 7b6b339ed..102c6db0c 100644 --- a/examples/build_system/make/rules.mk +++ b/examples/build_system/make/rules.mk @@ -134,6 +134,17 @@ OPENOCD_OPTION ?= flash-openocd: $(BUILD)/$(PROJECT).elf openocd $(OPENOCD_OPTION) -c "program $< verify reset exit" +# --------------- openocd-wch ----------------- +# wch-linke is not supported yet in official openOCD yet. We need to either use +# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or +# 2. compiled from https://github.com/hathach/riscv-openocd-wch or +# https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz +# with ./configure --disable-werror --enable-wlinke --enable-ch347=no +OPENOCD_WCH ?= /home/${USER}/app/riscv-openocd-wch/src/openocd +OPENOCD_WCH_OPTION ?= +flash-openocd-wch: $(BUILD)/$(PROJECT).elf + $(OPENOCD_WCH) $(OPENOCD_WCH_OPTION) -c init -c halt -c "flash write_image $<" -c reset -c exit + # --------------- dfu-util ----------------- DFU_UTIL_OPTION ?= -a 0 flash-dfu-util: $(BUILD)/$(PROJECT).bin diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 6b09fdac7..5c8b31a1c 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -16,8 +16,6 @@ CPU_CORE ?= rv32imac-ilp32 CFLAGS += \ -mcmodel=medany \ - -ffunction-sections \ - -fdata-sections \ -ffat-lto-objects \ -flto \ -DCH32V20x_${MCU_VARIANT} \ @@ -46,9 +44,5 @@ INC += \ FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V -# wch-link is not supported yet in official openOCD yet. We need to either use -# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or -# 2. compiled from modified source https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz -OPENOCD ?= $(HOME)/app/riscv-openocd-wch/src/openocd -flash: $(BUILD)/$(PROJECT).elf - $(OPENOCD) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "flash write_image $<" -c reset -c exit +OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg +flash: flash-openocd-wch diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index 50e48e7df..fe37ea8e3 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -35,41 +35,31 @@ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void USBHS_IRQHandler (void) __attribute__((naked)); -void USBHS_IRQHandler (void) -{ - __asm volatile ("call USBHS_IRQHandler_impl; mret"); -} +// TODO maybe having FS as port0, HS as port1 -__attribute__ ((used)) void USBHS_IRQHandler_impl (void) -{ +__attribute__((interrupt)) void USBHS_IRQHandler(void) { + #if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED tud_int_handler(0); + #endif } - -void OTG_FS_IRQHandler (void) __attribute__((naked)); -void OTG_FS_IRQHandler (void) -{ - __asm volatile ("call OTG_FS_IRQHandler_impl; mret"); -} - -__attribute__ ((used)) void OTG_FS_IRQHandler_impl (void) -{ +__attribute__((interrupt)) void OTG_FS_IRQHandler(void) { + #if CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED tud_int_handler(0); + #endif } //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -uint32_t SysTick_Config(uint32_t ticks) -{ +uint32_t SysTick_Config(uint32_t ticks) { NVIC_EnableIRQ(SysTicK_IRQn); - SysTick->CTLR=0; - SysTick->SR=0; - SysTick->CNT=0; - SysTick->CMP=ticks-1; - SysTick->CTLR=0xF; + SysTick->CTLR = 0; + SysTick->SR = 0; + SysTick->CNT = 0; + SysTick->CMP = ticks - 1; + SysTick->CTLR = 0xF; return 0; } @@ -82,17 +72,17 @@ void board_init(void) { SysTick_Config(SystemCoreClock / 1000); #endif - usart_printf_init(115200); + usart_printf_init(115200); - #if 0 +#if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED + // Use Highspeed USB RCC_USBCLK48MConfig(RCC_USBCLK48MCLKSource_USBPHY); RCC_USBHSPLLCLKConfig(RCC_HSBHSPLLCLKSource_HSE); RCC_USBHSConfig(RCC_USBPLL_Div2); RCC_USBHSPLLCKREFCLKConfig(RCC_USBHSPLLCKREFCLK_4M); RCC_USBHSPHYPLLALIVEcmd(ENABLE); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_USBHS, ENABLE); - - #else +#else uint8_t otg_div; switch (SystemCoreClock) { case 48000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div1; break; @@ -102,7 +92,7 @@ void board_init(void) { } RCC_OTGFSCLKConfig(otg_div); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); - #endif +#endif GPIO_InitTypeDef GPIO_InitStructure = {0}; @@ -127,24 +117,14 @@ void board_init(void) { } #if CFG_TUSB_OS == OPT_OS_NONE - volatile uint32_t system_ticks = 0; -/* Small workaround to support HW stack save/restore */ -void SysTick_Handler (void) __attribute__((naked)); -void SysTick_Handler (void) -{ - __asm volatile ("call SysTick_Handler_impl; mret"); -} - -__attribute__((used)) void SysTick_Handler_impl (void) -{ +__attribute__((interrupt)) void SysTick_Handler(void) { SysTick->SR = 0; system_ticks++; } -uint32_t board_millis (void) -{ +uint32_t board_millis(void) { return system_ticks; } @@ -154,36 +134,29 @@ uint32_t board_millis (void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write (bool state) -{ +void board_led_write(bool state) { GPIO_WriteBit(LED_PORT, LED_PIN, state); } -uint32_t board_button_read (void) -{ +uint32_t board_button_read(void) { return BUTTON_STATE_ACTIVE == GPIO_ReadInputDataBit(BUTTON_PORT, BUTTON_PIN); } -int board_uart_read (uint8_t *buf, int len) -{ +int board_uart_read(uint8_t* buf, int len) { (void) buf; (void) len; return 0; } -int board_uart_write (void const *buf, int len) -{ +int board_uart_write(void const* buf, int len) { int txsize = len; - while ( txsize-- ) - { + while (txsize--) { uart_write(*(uint8_t const*) buf); buf++; } return len; } - - #ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index 8a4bd7730..fd475c987 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -1,7 +1,8 @@ include_guard() set(CH32_FAMILY ch32v30x) -set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307/EVT/EXAM/SRC) +set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307) +set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) @@ -13,7 +14,10 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") -# Port0 Fullspeed, Port1 Highspeed +# default to highspeed +if (NOT DEFINED SPEED) + set(SPEED high) +endif() #------------------------------------ # BOARD_TARGET @@ -30,27 +34,26 @@ function(add_board_target BOARD_TARGET) set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) + set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) endif () set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/Core/core_riscv.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c + ${SDK_SRC_DIR}/Core/core_riscv.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${CH32_FAMILY}_it.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/Peripheral/inc + ${SDK_SRC_DIR}/Peripheral/inc ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) target_compile_definitions(${BOARD_TARGET} PUBLIC - #BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + BOARD_TUD_MAX_SPEED=$,OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> ) update_board(${BOARD_TARGET}) @@ -104,7 +107,7 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V307 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC - #${TOP}/src/portable/wch/dcd_ch32_usbhs.c + ${TOP}/src/portable/wch/dcd_ch32_usbhs.c ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index df9ded4a0..2dbe0c46a 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -7,63 +7,54 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack CROSS_COMPILE ?= riscv-none-elf- -# Submodules -CH32V307_SDK = hw/mcu/wch/ch32v307 - -# WCH-SDK paths -CH32V307_SDK_SRC = $(CH32V307_SDK)/EVT/EXAM/SRC +CH32_FAMILY = ch32v30x +SDK_DIR = hw/mcu/wch/ch32v307 +SDK_SRC_DIR = $(SDK_DIR)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 +# default to use high speed port, unless specified in board.mk or command line +SPEED ?= high + CFLAGS += \ -flto \ -msmall-data-limit=8 \ - -mno-save-restore -Os \ + -mno-save-restore \ -fmessage-length=0 \ -fsigned-char \ - -ffunction-sections \ - -fdata-sections \ -DCFG_TUSB_MCU=OPT_MCU_CH32V307 \ - -Xlinker --gc-sections \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + +ifeq ($(SPEED),high) + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using USBHS driver for HighSpeed mode") +else + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + $(info "Using USBFS driver for FullSpeed mode") +endif LDFLAGS_GCC += \ -nostdlib -nostartfiles \ - --specs=nosys.specs --specs=nano.specs + --specs=nosys.specs --specs=nano.specs \ SRC_C += \ src/portable/wch/dcd_ch32_usbhs.c \ - $(CH32V307_SDK_SRC)/Core/core_riscv.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_gpio.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_misc.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_rcc.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_usart.c + src/portable/wch/dcd_ch32_usbfs.c \ + $(SDK_SRC_DIR)/Core/core_riscv.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_gpio.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_misc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_rcc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_usart.c SRC_S += \ - $(CH32V307_SDK_SRC)/Startup/startup_ch32v30x_D8C.S + $(SDK_SRC_DIR)/Startup/startup_${CH32_FAMILY}_D8C.S INC += \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(CH32V307_SDK_SRC)/Peripheral/inc + $(TOP)/$(SDK_SRC_DIR)/Peripheral/inc # For freeRTOS port source FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V -# wch-link is not supported yet in official openOCD yet. We need to either use -# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or -# 2. compiled from modified source https://github.com/kprasadvnsi/riscv-openocd-wch -# -# Note: For Linux, somehow openocd in mounriver studio does not seem to have wch-link enable, -# therefore we need to compile it from source as follows: -# git clone https://github.com/kprasadvnsi/riscv-openocd-wch -# cd riscv-openocd-wch -# ./bootstrap -# ./configure CFLAGS="-Wno-error" --enable-wlink -# make -# openocd binaries will be generated in riscv-openocd-wch/src - -# flash target ROM bootloader -OPENOCD_WCH = /home/${USER}/app/riscv-openocd-wch/src/openocd -flash: $(BUILD)/$(PROJECT).elf - $(OPENOCD_WCH) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "program $<" -c wlink_reset_resume -c exit +OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg +flash: flash-openocd-wch diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index e313fea05..d928e44e8 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -404,14 +404,22 @@ //------------- WCH -------------// #elif TU_CHECK_MCU(OPT_MCU_CH32V307) - #define TUP_DCD_ENDPOINT_MAX 8 -// #define TUP_RHPORT_HIGHSPEED 1 + // v307 support both FS and HS + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS + + #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32F20X) - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS + + #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) + #define TUP_USBIP_WCH_USBFS #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/portable/wch/ch32_usbhs_reg.h b/src/portable/wch/ch32_usbhs_reg.h index 9b956231f..6ae91ec71 100644 --- a/src/portable/wch/ch32_usbhs_reg.h +++ b/src/portable/wch/ch32_usbhs_reg.h @@ -2,9 +2,9 @@ #define _USB_CH32_USBHS_REG_H #if (CFG_TUSB_MCU == OPT_MCU_CH32V307) -#include + #include #elif (CFG_TUSB_MCU == OPT_MCU_CH32F20X) -#include + #include #endif /******************* GLOBAL ******************/ diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 3e4b6cae5..413fe92c9 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -1,6 +1,7 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X || CFG_TUSB_MCU == OPT_MCU_CH32V307) +// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is full speed +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBFS) && (CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED) #include #include "device/dcd.h" diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 68e2179e9..9a12fc97f 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -26,11 +26,11 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && ((CFG_TUSB_MCU == OPT_MCU_CH32V307) || (CFG_TUSB_MCU == OPT_MCU_CH32F20X)) -#include "device/dcd.h" - +// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is high speed +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED) #include "ch32_usbhs_reg.h" +#include "device/dcd.h" // Max number of bi-directional endpoints including EP0 #define EP_MAX 16 -- cgit v1.3.1 From 4396ecd22cac5485ce006b330ca3ef3446d0022f Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Jun 2024 11:31:19 +0700 Subject: change COMPILE_DEFINE to CFLAGS_CLI for cmake/make --- .idea/cmake.xml | 2 +- examples/build_system/make/make.mk | 4 ++++ hw/bsp/family_support.cmake | 5 ++--- hw/bsp/rp2040/family.cmake | 5 ++--- 4 files changed, 9 insertions(+), 7 deletions(-) (limited to 'examples/build_system') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 3c51031c1..1055e31d3 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -3,7 +3,7 @@ - + diff --git a/examples/build_system/make/make.mk b/examples/build_system/make/make.mk index a78f4130d..1500a51e0 100644 --- a/examples/build_system/make/make.mk +++ b/examples/build_system/make/make.mk @@ -109,6 +109,10 @@ INC += \ BOARD_UPPER = $(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,$(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,$(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,$(subst x,X,$(subst y,Y,$(subst z,Z,$(subst -,_,$(BOARD)))))))))))))))))))))))))))) CFLAGS += -DBOARD_$(BOARD_UPPER) +ifdef CFLAGS_CLI + CFLAGS += $(CFLAGS_CLI) +endif + # use max3421 as host controller ifeq (${MAX3421_HOST},1) SRC_C += src/portable/analog/max3421/hcd_max3421.c diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d631c8563..9f2e34691 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -201,9 +201,8 @@ function(family_configure_common TARGET RTOS) ) # compile define from command line - if(DEFINED COMPILE_DEFINE) - #separate_arguments(COMPILE_DEFINE_LIST UNIX_COMMAND "${COMPILE_DEFINE}") - target_compile_definitions(${TARGET} PUBLIC ${COMPILE_DEFINE}) + if(DEFINED CFLAGS_CLI) + target_compile_options(${TARGET} PUBLIC ${CFLAGS_CLI}) endif() target_compile_options(${TARGET} PUBLIC ${WARNING_FLAGS_${CMAKE_C_COMPILER_ID}}) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 5d82cbf62..c81390b28 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -176,9 +176,8 @@ function(family_configure_target TARGET RTOS) set(RTOS_SUFFIX ${RTOS_SUFFIX} PARENT_SCOPE) # compile define from command line - if(DEFINED COMPILE_DEFINE) - #separate_arguments(COMPILE_DEFINE_LIST UNIX_COMMAND "${COMPILE_DEFINE}") - target_compile_definitions(${TARGET} PUBLIC ${COMPILE_DEFINE}) + if(DEFINED CFLAGS_CLI) + target_compile_options(${TARGET} PUBLIC ${CFLAGS_CLI}) endif() pico_add_extra_outputs(${TARGET}) -- cgit v1.3.1