From e5b47c9306471b41bd2d2ecbbe9ea8932028b380 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Jul 2026 14:11:43 +0700 Subject: skill: add usb-sniffer — wire-level capture with the ataradov hardware tap MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fourth view in the USB debugging toolset (usbmon = host URBs, usb-debug = host reasoning, usb-target-debug = device firmware, usb-sniffer = what actually crossed D+/D-). Covers the ataradov/usb-sniffer analyzer: headless pcapng capture (--speed ls/fs/hs, --fold, --limit self-exit), Wireshark/tshark analysis recipes, and the wire realities that bite: downstream broadcast, sniffer self-capture noise, xHCI devnum != wire address, tap-point-dependent reset visibility (hub choreography anchors), FS-behind-HS-hub splits. Every recipe hardware-validated on the rig, including the capture-window floor (a 3 s window provably misses the enumeration ladder; 3M packets minimum). Two udev files with distinct audiences, not one: - examples/device/99-tinyusb-examples.rules (renamed from 99-tinyusb.rules): the user-facing rules the examples need — cafe VID access, hidraw, the ModemManager blacklist, a couple of board probes. getting_started.rst, the webusb_serial README and its source comment point here. - tools/88-tinyusb.rules: the HIL rig's private probe/analyzer allowlist, now with the sniffer (6666:6620 + blank FX2LP 04b4:8613). Installed on the rig only; the usb-sniffer skill references it. --- examples/device/99-tinyusb-examples.rules | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 examples/device/99-tinyusb-examples.rules (limited to 'examples/device/99-tinyusb-examples.rules') diff --git a/examples/device/99-tinyusb-examples.rules b/examples/device/99-tinyusb-examples.rules new file mode 100644 index 000000000..e7a399345 --- /dev/null +++ b/examples/device/99-tinyusb-examples.rules @@ -0,0 +1,22 @@ +# udev rules for running the TinyUSB device examples as a non-root user. +# Copy this file to the location of your distribution's udev rules, for example on Ubuntu: +# sudo cp 99-tinyusb-examples.rules /etc/udev/rules.d/ +# Then reload udev configuration by executing: +# sudo udevadm control --reload-rules +# sudo udevadm trigger + +# Check SUBSYSTEM +SUBSYSTEMS=="hidraw", KERNEL=="hidraw*", MODE="0666", GROUP="dialout" + +# Rule applies to all TinyUSB example +ATTRS{idVendor}=="cafe", MODE="0666", GROUP="dialout" + +# Rule to blacklist TinyUSB example from being manipulated by ModemManager. +SUBSYSTEMS=="usb", ATTRS{idVendor}=="cafe", ENV{ID_MM_DEVICE_IGNORE}="1" + +# Xplained Pro SamG55 Device +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2111", MODE="0666", GROUP="users", ENV{ID_MM_DEVICE_IGNORE}="1" +SUBSYSTEMS=="tty", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2111", MODE="0666", GROUP="users", ENV{ID_MM_DEVICE_IGNORE}="1" + +# TI Stellaris/Tiva-C Launchpad ICDI +SUBSYSTEM=="usb", ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666" -- cgit v1.3.1