From 2f3b21a1e58e5c03c61e83920d77f8c27540dfd5 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Oct 2025 10:44:22 +0700 Subject: fix some warnings detected by pvs-studio --- .../device/dynamic_configuration/src/msc_disk.c | 39 +++++----------------- 1 file changed, 9 insertions(+), 30 deletions(-) (limited to 'examples/device/dynamic_configuration/src/msc_disk.c') diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index ebc86e260..e57f9e3f3 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -126,9 +126,9 @@ uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uin const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); - memcpy(inquiry_resp->product_id, pid, strlen(pid)); - memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + strncpy((char*) inquiry_resp->vendor_id, vid, 8); + strncpy((char*) inquiry_resp->product_id, pid, 16); + strncpy((char*) inquiry_resp->product_rev, rev, 4); return sizeof(scsi_inquiry_resp_t); // 36 bytes } @@ -211,42 +211,21 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* // Callback invoked when received an SCSI command not in built-in list below // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks -int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) -{ +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) { // read10 & write10 has their own callback and MUST not be handled here + (void) buffer; + (void) bufsize; - void const* response = NULL; - int32_t resplen = 0; - - // most scsi handled is input - bool in_xfer = true; - - switch (scsi_cmd[0]) - { + switch (scsi_cmd[0]) { default: // Set Sense = Invalid Command Operation tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // negative means error -> tinyusb could stall and/or response with failed status - resplen = -1; - break; - } - - // return resplen must not larger than bufsize - if ( resplen > bufsize ) resplen = bufsize; - - if ( response && (resplen > 0) ) - { - if(in_xfer) - { - memcpy(buffer, response, (size_t) resplen); - }else - { - // SCSI output - } + return -1; } - return resplen; + return -1; } #endif -- cgit v1.3.1 From f39dcae9f1bed1dfcfb239f76677ef980a9976c9 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Oct 2025 13:04:49 +0700 Subject: fix several warnings --- .../audio_4_channel_mic/src/usb_descriptors.c | 2 +- .../src/usb_descriptors.c | 2 +- examples/device/audio_test/src/usb_descriptors.c | 2 +- .../audio_test_freertos/src/usb_descriptors.c | 2 +- .../audio_test_multi_rate/src/usb_descriptors.c | 2 +- .../device/cdc_dual_ports/src/usb_descriptors.c | 10 ++++---- examples/device/cdc_msc/src/main.c | 19 +++++++++----- examples/device/cdc_msc/src/msc_disk.c | 6 +++-- examples/device/cdc_msc/src/usb_descriptors.c | 12 ++++----- examples/device/cdc_msc_freertos/src/msc_disk.c | 2 +- .../device/cdc_msc_freertos/src/usb_descriptors.c | 12 ++++----- examples/device/cdc_uac2/src/usb_descriptors.c | 12 ++++----- examples/device/dfu/src/usb_descriptors.c | 4 +-- examples/device/dfu_runtime/src/usb_descriptors.c | 4 +-- .../device/dynamic_configuration/src/msc_disk.c | 2 +- .../dynamic_configuration/src/usb_descriptors.c | 2 +- .../hid_boot_interface/src/usb_descriptors.c | 4 +-- .../device/hid_composite/src/usb_descriptors.c | 8 +++--- .../hid_composite_freertos/src/usb_descriptors.c | 8 +++--- .../device/hid_generic_inout/src/usb_descriptors.c | 4 +-- .../hid_multiple_interface/src/usb_descriptors.c | 4 +-- examples/device/midi_test/src/usb_descriptors.c | 8 +++--- .../midi_test_freertos/src/usb_descriptors.c | 8 +++--- examples/device/msc_dual_lun/src/usb_descriptors.c | 8 +++--- examples/device/mtp/src/usb_descriptors.c | 10 ++++---- .../net_lwip_webserver/src/usb_descriptors.c | 2 +- examples/device/uac2_headset/src/usb_descriptors.c | 4 +-- .../device/uac2_speaker_fb/src/usb_descriptors.c | 4 +-- examples/device/usbtmc/src/usb_descriptors.c | 29 +++++++++++++++++----- .../device/video_capture/src/usb_descriptors.c | 4 +-- .../device/video_capture_2ch/src/usb_descriptors.c | 4 +-- .../device/webusb_serial/src/usb_descriptors.c | 4 +-- .../host_hid_to_device_cdc/src/usb_descriptors.c | 10 ++++---- .../host_info_to_device_cdc/src/usb_descriptors.c | 10 ++++---- hw/bsp/board.c | 16 +++--------- hw/bsp/stm32h7/boards/stm32h743eval/board.h | 2 +- src/common/tusb_common.h | 2 +- src/common/tusb_debug.h | 12 +++++---- src/osal/osal.h | 13 +++++----- 39 files changed, 145 insertions(+), 128 deletions(-) (limited to 'examples/device/dynamic_configuration/src/msc_disk.c') diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 728a5f9ce..c8abf491d 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c index 728a5f9ce..c8abf491d 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index 9864377f6..5e448002d 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/audio_test_freertos/src/usb_descriptors.c b/examples/device/audio_test_freertos/src/usb_descriptors.c index 9864377f6..5e448002d 100644 --- a/examples/device/audio_test_freertos/src/usb_descriptors.c +++ b/examples/device/audio_test_freertos/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index f50e70a25..e54af14fb 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -41,7 +41,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index bbcb479f5..6b3963814 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -127,7 +127,7 @@ enum { #define EPNUM_CDC_1_IN 0x84 #endif -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -140,7 +140,7 @@ uint8_t const desc_fs_configuration[] = { #if TUD_OPT_HIGH_SPEED // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -152,7 +152,7 @@ uint8_t const desc_hs_configuration[] = { }; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -213,7 +213,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 4e7aa989e..c4606528a 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -42,6 +42,7 @@ enum { }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; +static bool blink_enable = true; void led_blinking_task(void); void cdc_task(void); @@ -135,11 +136,13 @@ void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { (void) itf; (void) rts; - // TODO set some indicator if (dtr) { // Terminal connected + blink_enable = false; + board_led_write(true); } else { // Terminal disconnected + blink_enable = true; } } @@ -155,10 +158,14 @@ void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; - // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time - start_ms += blink_interval_ms; + if (blink_enable) { + // Blink every interval ms + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } + start_ms += blink_interval_ms; - board_led_write(led_state); - led_state = 1 - led_state; // toggle + board_led_write(led_state); + led_state = !led_state; + } } diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 6c112aa8b..9a43d321e 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -48,7 +48,7 @@ enum { #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { +static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; // sector_per_cluster = 1; reserved_sectors = 1; @@ -213,7 +213,9 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t * (void) lun; // out of ramdisk - if (lba >= DISK_BLOCK_NUM) return -1; + if (lba >= DISK_BLOCK_NUM) { + return -1; + } #ifndef CFG_EXAMPLE_MSC_READONLY uint8_t *addr = msc_disk[lba] + offset; diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 597a6b1e6..4fe03f90e 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -125,7 +125,7 @@ enum { #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) // full speed configuration -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -140,7 +140,7 @@ uint8_t const desc_fs_configuration[] = { // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -152,10 +152,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, @@ -223,7 +223,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 38345ca4d..996be738d 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -79,7 +79,7 @@ enum { #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index cb440c209..bcfef48a7 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -124,7 +124,7 @@ enum { #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN) -uint8_t const desc_fs_configuration[] = +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -140,7 +140,7 @@ uint8_t const desc_fs_configuration[] = // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -153,10 +153,10 @@ uint8_t const desc_hs_configuration[] = }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, @@ -225,7 +225,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/cdc_uac2/src/usb_descriptors.c b/examples/device/cdc_uac2/src/usb_descriptors.c index da55bdb5a..748c36b7b 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.c +++ b/examples/device/cdc_uac2/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -116,7 +116,7 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_CDC_IN 0x84 #endif -uint8_t const desc_fs_configuration[] = +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -132,7 +132,7 @@ uint8_t const desc_fs_configuration[] = // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -144,10 +144,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = 0x0100, @@ -215,7 +215,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index fd469aaf2..1550b70b8 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -126,7 +126,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c index 7ac53d255..c5cc9f92f 100644 --- a/examples/device/dfu_runtime/src/usb_descriptors.c +++ b/examples/device/dfu_runtime/src/usb_descriptors.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -122,7 +122,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index e57f9e3f3..95bf8e45f 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -46,7 +46,7 @@ enum #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 0a2049288..7660e59dd 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -202,7 +202,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index d68ef16d9..d9ce4ef09 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -140,7 +140,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index ce7fbd13f..7b1f4f8d8 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -43,7 +43,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -120,10 +120,10 @@ uint8_t const desc_configuration[] = // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, @@ -188,7 +188,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index 3f231fecc..1d703beff 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -43,7 +43,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -119,10 +119,10 @@ uint8_t const desc_configuration[] = // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, @@ -185,7 +185,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index 64f6d17ae..1b5c055e6 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -130,7 +130,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/hid_multiple_interface/src/usb_descriptors.c b/examples/device/hid_multiple_interface/src/usb_descriptors.c index 86f567e8e..145836300 100644 --- a/examples/device/hid_multiple_interface/src/usb_descriptors.c +++ b/examples/device/hid_multiple_interface/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -146,7 +146,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index 384742ae8..8cb235d30 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = 0x0200, @@ -98,7 +98,7 @@ enum { #define EPNUM_MIDI_IN 0x81 #endif -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -107,7 +107,7 @@ uint8_t const desc_fs_configuration[] = { }; #if TUD_OPT_HIGH_SPEED -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -143,7 +143,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/midi_test_freertos/src/usb_descriptors.c b/examples/device/midi_test_freertos/src/usb_descriptors.c index 384742ae8..8cb235d30 100644 --- a/examples/device/midi_test_freertos/src/usb_descriptors.c +++ b/examples/device/midi_test_freertos/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = 0x0200, @@ -98,7 +98,7 @@ enum { #define EPNUM_MIDI_IN 0x81 #endif -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -107,7 +107,7 @@ uint8_t const desc_fs_configuration[] = { }; #if TUD_OPT_HIGH_SPEED -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -143,7 +143,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = { +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer "TinyUSB Device", // 2: Product diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index efb9a966d..e3a0753b5 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -39,7 +39,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -103,7 +103,7 @@ enum #endif -uint8_t const desc_fs_configuration[] = +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -113,7 +113,7 @@ uint8_t const desc_fs_configuration[] = }; #if TUD_OPT_HIGH_SPEED -uint8_t const desc_hs_configuration[] = +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -151,7 +151,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/mtp/src/usb_descriptors.c b/examples/device/mtp/src/usb_descriptors.c index 80345d8f8..ff35e0df3 100644 --- a/examples/device/mtp/src/usb_descriptors.c +++ b/examples/device/mtp/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -121,7 +121,7 @@ const uint8_t desc_fs_configuration[] = { // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP event, EP event size, EP event polling, EP Out & EP In address, EP size @@ -129,10 +129,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, @@ -198,7 +198,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUsb", // 1: Manufacturer diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index cd800f521..57ee3a218 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -68,7 +68,7 @@ enum //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index fc12c122e..d2f4f45b3 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -41,7 +41,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -141,7 +141,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.c b/examples/device/uac2_speaker_fb/src/usb_descriptors.c index ee1b92225..cc904031b 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.c +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.c @@ -45,7 +45,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -230,7 +230,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/usbtmc/src/usb_descriptors.c b/examples/device/usbtmc/src/usb_descriptors.c index 85acd990a..d03c64102 100644 --- a/examples/device/usbtmc/src/usb_descriptors.c +++ b/examples/device/usbtmc/src/usb_descriptors.c @@ -44,7 +44,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -112,7 +112,7 @@ enum #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_USBTMC_DESC_LEN) -uint8_t const desc_fs_configuration[] = +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -122,7 +122,7 @@ uint8_t const desc_fs_configuration[] = #if TUD_OPT_HIGH_SPEED -uint8_t const desc_hs_configuration[] = +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -131,10 +131,10 @@ uint8_t const desc_hs_configuration[] = }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, @@ -158,6 +158,23 @@ uint8_t const* tud_descriptor_device_qualifier_cb(void) return (uint8_t const*) &desc_device_qualifier; } +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) { + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + // Note: the descriptor type is OTHER_SPEED_CONFIG instead of CONFIG + memcpy(desc_other_speed_config, + (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration, + CONFIG_TOTAL_LEN); + + desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG; + + return desc_other_speed_config; +} + #endif // Invoked when received GET CONFIGURATION DESCRIPTOR @@ -187,7 +204,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index b3e19b0f0..775386c65 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -63,7 +63,7 @@ char const* string_desc_arr[] = { //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -384,7 +384,7 @@ static uint8_t * get_hs_configuration_desc(void) { } // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, diff --git a/examples/device/video_capture_2ch/src/usb_descriptors.c b/examples/device/video_capture_2ch/src/usb_descriptors.c index e78e452fc..03fac2d5c 100644 --- a/examples/device/video_capture_2ch/src/usb_descriptors.c +++ b/examples/device/video_capture_2ch/src/usb_descriptors.c @@ -68,7 +68,7 @@ char const* string_desc_arr[] = { //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -551,7 +551,7 @@ static uint8_t * get_hs_configuration_desc(void) { } // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 2b69a5b56..044a6b294 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -228,7 +228,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c index b7cffe23d..c2377cb00 100644 --- a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -122,7 +122,7 @@ enum { #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN) // full speed configuration -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -134,7 +134,7 @@ uint8_t const desc_fs_configuration[] = { // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -143,10 +143,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, diff --git a/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c index b7cffe23d..c2377cb00 100644 --- a/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c @@ -42,7 +42,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = { +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = USB_BCD, @@ -122,7 +122,7 @@ enum { #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN) // full speed configuration -uint8_t const desc_fs_configuration[] = { +static uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -134,7 +134,7 @@ uint8_t const desc_fs_configuration[] = { // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = { +static uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -143,10 +143,10 @@ uint8_t const desc_hs_configuration[] = { }; // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = { +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 41e6eb1b8..476ec6733 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -51,7 +51,7 @@ int sys_read(int fhdl, char *buf, size_t count) TU_ATTR_USED; int sys_write(int fhdl, const char *buf, size_t count) { (void) fhdl; - SEGGER_RTT_Write(0, (const char *) buf, (int) count); + SEGGER_RTT_Write(0, buf, (int) count); return (int) count; } @@ -111,16 +111,6 @@ int sys_read (int fhdl, char *buf, size_t count) { #endif -//int _close(int fhdl) { -// (void) fhdl; -// return 0; -//} - -//int _fstat(int file, struct stat *st) { -// memset(st, 0, sizeof(*st)); -// st->st_mode = S_IFCHR; -//} - // Clang use picolibc #if defined(__clang__) static int cl_putc(char c, FILE *f) { @@ -147,8 +137,8 @@ TU_ATTR_WEAK size_t board_get_unique_id(uint8_t id[], size_t max_len) { (void) max_len; // fixed serial string is 01234567889ABCDEF uint32_t* uid32 = (uint32_t*) (uintptr_t)id; - uid32[0] = 0x67452301; - uid32[1] = 0xEFCDAB89; + uid32[0] = 0x67452301u; + uid32[1] = 0xEFCDAB89u; return 8; } diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index cfffc7770..96bfc24e1 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -61,7 +61,7 @@ static board_pindef_t board_pindef[] = { { // LED .port = GPIOA, .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, - .active_state = 1 + .active_state = 0 }, { // Button .port = GPIOC, diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 50c1be2c6..dfa9299c1 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -131,7 +131,7 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, c } // For memcpy, src may be NULL only if count == 0. Reject otherwise. - if (src == NULL && count != 0) { + if (src == NULL && count != 0u) { return -1; } diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 1d0c6f1ad..86517b9c9 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -58,8 +58,10 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); #define tu_printf printf #endif -static inline void tu_print_buf(uint8_t const* buf, uint32_t bufsize) { - for(uint32_t i=0; icount; i++) { - if (p_table->items[i].key == key) { return p_table->items[i].data; } + if (p_table->items[i].key == key) { + return p_table->items[i].data; + } } // not found return the key value in hex @@ -130,8 +134,6 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 #define TU_LOG_FAILED() #endif -// TODO replace all TU_LOGn with TU_LOG(n) - #define TU_LOG0(...) #define TU_LOG0_MEM(...) #define TU_LOG0_BUF(...) diff --git a/src/osal/osal.h b/src/osal/osal.h index a33280425..8faa81b07 100644 --- a/src/osal/osal.h +++ b/src/osal/osal.h @@ -71,10 +71,9 @@ typedef void (*osal_task_func_t)( void * ); #error OS is not supported yet #endif -//--------------------------------------------------------------------+ -// OSAL Porting API -// Should be implemented as static inline function in osal_port.h header -/* +/*-------------------------------------------------------------------- + OSAL Porting API + Should be implemented as static inline function in osal_port.h header void osal_spin_init(osal_spinlock_t *ctx); void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr); @@ -83,7 +82,7 @@ typedef void (*osal_task_func_t)( void * ); bool osal_semaphore_delete(osal_semaphore_t semd_hdl); bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr); bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec); - void osal_semaphore_reset(osal_semaphore_t sem_hdl); // TODO removed + void osal_semaphore_reset(osal_semaphore_t sem_hdl); osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef); bool osal_mutex_delete(osal_mutex_t mutex_hdl) @@ -95,8 +94,8 @@ typedef void (*osal_task_func_t)( void * ); bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec); bool osal_queue_send(osal_queue_t qhdl, void const * data, bool in_isr); bool osal_queue_empty(osal_queue_t qhdl); -*/ -//--------------------------------------------------------------------+ +--------------------------------------------------------------------------*/ + #ifdef __cplusplus } -- cgit v1.3.1 From b08f672daf1efadd9c77a775332dc0b64ac22e4a Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Oct 2025 17:24:55 +0700 Subject: add pvs-studio analyze to ci --- .github/workflows/build.yml | 2 +- .github/workflows/build_util.yml | 26 +++++++++++++ .github/workflows/static_analysis.yml | 43 ++++++++++++++++++++++ examples/device/cdc_msc/src/msc_disk.c | 3 +- examples/device/cdc_msc_freertos/src/msc_disk.c | 3 +- .../device/dynamic_configuration/src/msc_disk.c | 3 +- 6 files changed, 76 insertions(+), 4 deletions(-) create mode 100644 .github/workflows/static_analysis.yml (limited to 'examples/device/dynamic_configuration/src/msc_disk.c') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index becbc5069..0495ba6a9 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -219,7 +219,7 @@ jobs: uses: actions/checkout@v4 - name: Download Artifacts - uses: actions/download-artifact@v4 + uses: actions/download-artifact@v5 with: path: cmake-build merge-multiple: true diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index a2c96f3c0..d52924efd 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -20,6 +20,10 @@ on: required: false default: false type: boolean + analyze-pvs: + required: false + default: false + type: boolean os: required: false type: string @@ -68,6 +72,28 @@ jobs: fi shell: bash + - name: PVS-Studio analyze + if: ${{ inputs.analyze-pvs }} + run: | + wget -q -O - https://files.pvs-studio.com/etc/pubkey.txt | sudo apt-key add - + sudo wget -O /etc/apt/sources.list.d/viva64.list https://files.pvs-studio.com/etc/viva64.list + sudo apt update + sudo apt install pvs-studio + pvs-studio-analyzer credentials ${{ secrets.PVS_STUDIO_CREDENTIALS }} + mkdir -p sarif-reports + for build_dir in cmake-build/cmake-build-*; do + BOARD=${build_dir#cmake-build/cmake-build-} + pvs-studio-analyzer analyze -f ${build_dir}/compile_commands.json -j -o ${build_dir}/pvs-report.log --exclude-path hw/mcu/ --exclude-path lib/ + plog-converter -t sarif -o sarif-reports/${BOARD}.sarif ${build_dir}/pvs-report.log + done + + - name: PVS-Studio upload SARIF + if: ${{ inputs.analyze-pvs }} + uses: github/codeql-action/upload-sarif@v4 + with: + sarif_file: sarif-reports/ + category: PVS-Studio + - name: Upload Artifacts for Hardware Testing if: ${{ inputs.upload-artifacts }} uses: actions/upload-artifact@v4 diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml new file mode 100644 index 000000000..3ace5cf99 --- /dev/null +++ b/.github/workflows/static_analysis.yml @@ -0,0 +1,43 @@ +name: Static Analysis +on: + workflow_dispatch: + push: + branches: + - master + pull_request: + types: [opened, synchronize, reopened] +jobs: +# SonarQube: +# name: Build and analyze +# runs-on: ubuntu-latest +# env: +# BUILD_WRAPPER_OUT_DIR: build_wrapper_output_directory # Directory where build-wrapper output will be placed +# steps: +# - uses: actions/checkout@v4 +# with: +# fetch-depth: 0 # Shallow clones should be disabled for a better relevancy of analysis +# - name: Install Build Wrapper +# uses: SonarSource/sonarqube-scan-action/install-build-wrapper@v6 +# - name: Run Build Wrapper +# run: | +# build-wrapper-linux-x86-64 --out-dir ${{ env.BUILD_WRAPPER_OUT_DIR }} cmake --build --preset ${{ env.BOARD }} -t ${{ env.EXAMPLE }} +# - name: SonarQube Scan +# uses: SonarSource/sonarqube-scan-action@v6 +# env: +# SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }} +# with: +# args: > +# --define "sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json" + PVS-Studio: + uses: ./.github/workflows/build_util.yml + strategy: + fail-fast: false + matrix: + board: + - 'stm32h743eval' + with: + build-system: 'cmake' + toolchain: 'arm-gcc' + build-args: '-b${{ matrix.board }}' + one-per-family: true + analyze-pvs: true diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 9a43d321e..b39f5efa1 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -45,10 +45,11 @@ enum { DISK_BLOCK_SIZE = 512 }; +static #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; // sector_per_cluster = 1; reserved_sectors = 1; diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 996be738d..29ff86281 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -76,10 +76,11 @@ enum { DISK_BLOCK_SIZE = 512 }; +static #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index 95bf8e45f..ab71b02d6 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -43,10 +43,11 @@ enum DISK_BLOCK_SIZE = 512 }; +static #ifdef CFG_EXAMPLE_MSC_READONLY const #endif -static uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = +uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { //------------- Block0: Boot Sector -------------// // byte_per_sector = DISK_BLOCK_SIZE; fat12_sector_num_16 = DISK_BLOCK_NUM; -- cgit v1.3.1