From d5d4909c20f581ef2046932191f487c001d59ca3 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 8 Apr 2022 13:36:05 +0700 Subject: proof of concpet that device pio-usb work with host pio-usb --- examples/device/hid_boot_interface/src/main.c | 4 ++++ examples/device/hid_boot_interface/src/tusb_config.h | 3 +++ 2 files changed, 7 insertions(+) (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index e5e2f6856..ed7f235b7 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -31,6 +31,8 @@ #include "tusb.h" #include "usb_descriptors.h" +#include "pio_usb.h" + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ @@ -59,6 +61,8 @@ int main(void) while (1) { + pio_usb_device_task(); + tud_task(); // tinyusb device task led_blinking_task(); diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index 1c8fa40b2..d4f67e7ba 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -39,6 +39,9 @@ #error CFG_TUSB_MCU must be defined #endif +// Use raspberry pio-usb for device +#define CFG_TUD_RPI_PIO_USB 1 + // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_DEVICE_RHPORT_NUM #define BOARD_DEVICE_RHPORT_NUM 0 -- cgit v1.3.1 From cc5a4720e5c1295eacf02c7b81fc4454f29cfaa4 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 14 Apr 2022 21:51:49 +0700 Subject: catch up with pio lib --- .../device/hid_boot_interface/src/tusb_config.h | 3 + hw/bsp/rp2040/family.cmake | 5 +- lib/Pico-PIO-USB | 2 +- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 234 +++++++++++++++++++++ src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 28 ++- 5 files changed, 254 insertions(+), 18 deletions(-) create mode 100644 src/portable/raspberrypi/pio_usb/dcd_pio_usb.c (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index d4f67e7ba..c8bb8a807 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -41,6 +41,9 @@ // Use raspberry pio-usb for device #define CFG_TUD_RPI_PIO_USB 1 +#if CFG_TUD_RPI_PIO_USB +#define BOARD_DEVICE_RHPORT_NUM 1 +#endif // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_DEVICE_RHPORT_NUM diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index b186fc78e..d872c35ea 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -31,6 +31,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ${TOP}/src/common/tusb_fifo.c ${TOP}/lib/Pico-PIO-USB/pio_usb.c ${TOP}/lib/Pico-PIO-USB/pio_usb_host.c + ${TOP}/lib/Pico-PIO-USB/pio_usb_device.c ${TOP}/lib/Pico-PIO-USB/pio_usb_hw.c ${TOP}/lib/Pico-PIO-USB/usb_crc.c ) @@ -69,8 +70,8 @@ if (NOT TARGET _rp2040_family_inclusion_marker) add_library(tinyusb_device_base INTERFACE) target_sources(tinyusb_device_base INTERFACE ${TOP}/src/portable/raspberrypi/rp2040/dcd_rp2040.c - ${TOP}/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c + ${TOP}/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c ${TOP}/src/device/usbd.c ${TOP}/src/device/usbd_control.c ${TOP}/src/class/audio/audio_device.c @@ -92,13 +93,13 @@ if (NOT TARGET _rp2040_family_inclusion_marker) target_sources(tinyusb_host_base INTERFACE ${TOP}/src/portable/raspberrypi/rp2040/hcd_rp2040.c ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c + ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c ${TOP}/src/host/usbh.c ${TOP}/src/host/hub.c ${TOP}/src/class/cdc/cdc_host.c ${TOP}/src/class/hid/hid_host.c ${TOP}/src/class/msc/msc_host.c ${TOP}/src/class/vendor/vendor_host.c - ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c ) # Sometimes have to do host specific actions in mostly common functions diff --git a/lib/Pico-PIO-USB b/lib/Pico-PIO-USB index 4993f4a1d..84a00b976 160000 --- a/lib/Pico-PIO-USB +++ b/lib/Pico-PIO-USB @@ -1 +1 @@ -Subproject commit 4993f4a1df03c8af13c8091052a6274e8c333bc0 +Subproject commit 84a00b976041d8c34cf660fda6fa88198c9721dc diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c new file mode 100644 index 000000000..08d8b6086 --- /dev/null +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -0,0 +1,234 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && CFG_TUD_RPI_PIO_USB + +#include "pico.h" +#include "hardware/pio.h" +#include "pio_usb.h" + +#include "device/dcd.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +#define RHPORT_OFFSET 1 +#define RHPORT_PIO(_x) ((_x)-RHPORT_OFFSET) + +static uint8_t new_addr = 0; + +//------------- -------------// +static usb_device_t *usb_device = NULL; +static usb_descriptor_buffers_t desc; + +/*------------------------------------------------------------------*/ +/* Device API + *------------------------------------------------------------------*/ + +// Initialize controller to device mode +void dcd_init (uint8_t rhport) +{ + (void) rhport; + + static pio_usb_configuration_t config = PIO_USB_DEFAULT_CONFIG; + usb_device = pio_usb_device_init(&config, &desc); +} + +// Enable device interrupt +void dcd_int_enable (uint8_t rhport) +{ + (void) rhport; +} + +// Disable device interrupt +void dcd_int_disable (uint8_t rhport) +{ + (void) rhport; +} + +// Receive Set Address request, mcu port must also include status IN response +void dcd_set_address (uint8_t rhport, uint8_t dev_addr) +{ + // store addr, will update crc5 lut when status is complete + new_addr = dev_addr; + + dcd_edpt_xfer(rhport, 0x80, NULL, 0); +} + +// Wake up host +void dcd_remote_wakeup (uint8_t rhport) +{ + (void) rhport; +} + +// Connect by enabling internal pull-up resistor on D+/D- +void dcd_connect(uint8_t rhport) +{ + (void) rhport; +} + +// Disconnect by disabling internal pull-up resistor on D+/D- +void dcd_disconnect(uint8_t rhport) +{ + (void) rhport; +} + +//--------------------------------------------------------------------+ +// Endpoint API +//--------------------------------------------------------------------+ + +// Configure endpoint's registers according to descriptor +bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) +{ + (void) rhport; + (void) ep_desc; + return false; +} + +void dcd_edpt_close_all (uint8_t rhport) +{ + (void) rhport; +} + +// Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack +bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +{ + uint8_t pio_rhport = RHPORT_PIO(rhport); + return pio_usb_device_endpoint_transfer(pio_rhport, ep_addr, buffer, total_bytes); +} + +// Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c +bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +{ + (void) rhport; + (void) ep_addr; + (void) ff; + (void) total_bytes; + return false; +} + +// Stall endpoint +void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + (void) ep_addr; +} + +// clear stall, data toggle is also reset to DATA0 +void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + (void) ep_addr; +} + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ +extern void update_ep0_crc5_lut(uint8_t addr); + +static void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_t* port, uint32_t flag) +{ + volatile uint32_t* ep_reg; + xfer_result_t result; + + if ( flag == PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) + { + ep_reg = &port->ep_complete; + result = XFER_RESULT_SUCCESS; + } + else if ( flag == PIO_USB_INTS_ENDPOINT_ERROR_BITS ) + { + ep_reg = &port->ep_error; + result = XFER_RESULT_FAILED; + } + else if ( flag == PIO_USB_INTS_ENDPOINT_STALLED_BITS ) + { + ep_reg = &port->ep_stalled; + result = XFER_RESULT_STALLED; + } + else + { + // something wrong + return; + } + + const uint32_t ep_all = *ep_reg; + + for(uint8_t ep_idx = 0; ep_idx < PIO_USB_EP_POOL_CNT; ep_idx++) + { + uint32_t const mask = (1u << ep_idx); + + if (ep_all & mask) + { + pio_hw_endpoint_t* ep = PIO_USB_HW_EP(ep_idx); + uint8_t const tu_rhport = port - PIO_USB_HW_RPORT(0) + 1; + + // address is changed, update crc5 lut + if (new_addr && ep->ep_num == 0x80 && ep->actual_len == 0) + { + update_ep0_crc5_lut(new_addr); + new_addr = 0; + } + + dcd_event_xfer_complete(tu_rhport, ep->ep_num, ep->actual_len, result, true); + } + } + + // clear all + (*ep_reg) &= ~ep_all; +} + +// IRQ Handler +void __no_inline_not_in_flash_func(pio_usb_device_irq_handler)(uint8_t root_id) +{ + uint8_t const tu_rhport = root_id + 1; + pio_hw_root_port_t* port = PIO_USB_HW_RPORT(root_id); + uint32_t const ints = port->ints; + + if (ints & PIO_USB_INTS_RESET_END_BITS) + { + new_addr = 0; + dcd_event_bus_reset(tu_rhport, TUSB_SPEED_FULL, true); + } + + if (ints & PIO_USB_INTS_SETUP_REQ_BITS) + { + dcd_event_setup_received(tu_rhport, port->setup_packet, true); + } + + if ( ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) + { + handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_COMPLETE_BITS); + } + + // clear all + port->ints &= ~ints; +} + +#endif diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index c2ef54b9e..4bd318448 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -116,19 +116,19 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const bool const need_pre = (dev_tree.hub_addr && dev_tree.speed == TUSB_SPEED_LOW); rhport = RHPORT_PIO(rhport); - return pio_usb_endpoint_open(rhport, dev_addr, (uint8_t const*) desc_ep, need_pre); + return pio_usb_host_endpoint_open(rhport, dev_addr, (uint8_t const*) desc_ep, need_pre); } bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { rhport = RHPORT_PIO(rhport); - return pio_usb_endpoint_transfer(rhport, dev_addr, ep_addr, buffer, buflen); + return pio_usb_host_endpoint_transfer(rhport, dev_addr, ep_addr, buffer, buflen); } bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { rhport = RHPORT_PIO(rhport); - return pio_usb_endpoint_send_setup(rhport, dev_addr, setup_packet); + return pio_usb_host_send_setup(rhport, dev_addr, setup_packet); } //bool hcd_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) @@ -153,7 +153,7 @@ bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) return true; } -void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_t* port, uint32_t flag) +static void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_t* port, uint32_t flag) { volatile uint32_t* ep_reg; xfer_result_t result; @@ -200,37 +200,35 @@ void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_t* port void __no_inline_not_in_flash_func(pio_usb_host_irq_handler)(uint8_t root_id) { pio_hw_root_port_t* port = PIO_USB_HW_RPORT(root_id); + uint32_t const ints = port->ints; - if ( port->ints & PIO_USB_INTS_CONNECT_BITS ) + if ( ints & PIO_USB_INTS_CONNECT_BITS ) { - port->ints &= ~PIO_USB_INTS_CONNECT_BITS; - hcd_event_device_attach(root_id+1, true); } - if ( port->ints & PIO_USB_INTS_DISCONNECT_BITS ) + if ( ints & PIO_USB_INTS_DISCONNECT_BITS ) { - port->ints &= ~PIO_USB_INTS_DISCONNECT_BITS; hcd_event_device_remove(root_id+1, true); } - if ( port->ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) + if ( ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) { - port->ints &= ~PIO_USB_INTS_ENDPOINT_COMPLETE_BITS; handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_COMPLETE_BITS); } - if ( port->ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS ) + if ( ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS ) { - port->ints &= ~PIO_USB_INTS_ENDPOINT_ERROR_BITS; handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_ERROR_BITS); } - if ( port->ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS ) + if ( ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS ) { - port->ints &= ~PIO_USB_INTS_ENDPOINT_STALLED_BITS; handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_STALLED_BITS); } + + // clear all + port->ints &= ~ints; } #endif -- cgit v1.3.1 From 05bfc1a9eba9fc901c35bdd1844cf962c5732310 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 15 Apr 2022 01:04:12 +0700 Subject: pio device works well --- examples/device/hid_boot_interface/src/main.c | 2 -- lib/Pico-PIO-USB | 2 +- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 45 ++++++++++---------------- 3 files changed, 18 insertions(+), 31 deletions(-) (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index ed7f235b7..031b17a2e 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -61,8 +61,6 @@ int main(void) while (1) { - pio_usb_device_task(); - tud_task(); // tinyusb device task led_blinking_task(); diff --git a/lib/Pico-PIO-USB b/lib/Pico-PIO-USB index 84a00b976..d2b37b42b 160000 --- a/lib/Pico-PIO-USB +++ b/lib/Pico-PIO-USB @@ -1 +1 @@ -Subproject commit 84a00b976041d8c34cf660fda6fa88198c9721dc +Subproject commit d2b37b42befb6c761433b3c164c59a049721762f diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c index 08d8b6086..dc9cbb45b 100644 --- a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -41,8 +41,6 @@ #define RHPORT_OFFSET 1 #define RHPORT_PIO(_x) ((_x)-RHPORT_OFFSET) -static uint8_t new_addr = 0; - //------------- -------------// static usb_device_t *usb_device = NULL; static usb_descriptor_buffers_t desc; @@ -75,10 +73,12 @@ void dcd_int_disable (uint8_t rhport) // Receive Set Address request, mcu port must also include status IN response void dcd_set_address (uint8_t rhport, uint8_t dev_addr) { - // store addr, will update crc5 lut when status is complete - new_addr = dev_addr; + uint8_t const pio_rhport = RHPORT_PIO(rhport); + + // must be called before queuing status + pio_usb_device_set_address(pio_rhport, dev_addr); - dcd_edpt_xfer(rhport, 0x80, NULL, 0); + pio_usb_device_endpoint_transfer(pio_rhport, 0x80, NULL, 0); } // Wake up host @@ -104,11 +104,10 @@ void dcd_disconnect(uint8_t rhport) //--------------------------------------------------------------------+ // Configure endpoint's registers according to descriptor -bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) +bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { - (void) rhport; - (void) ep_desc; - return false; + uint8_t const pio_rhport = RHPORT_PIO(rhport); + return pio_usb_device_endpoint_open(pio_rhport, (uint8_t const*) desc_ep); } void dcd_edpt_close_all (uint8_t rhport) @@ -119,19 +118,19 @@ void dcd_edpt_close_all (uint8_t rhport) // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { - uint8_t pio_rhport = RHPORT_PIO(rhport); + uint8_t const pio_rhport = RHPORT_PIO(rhport); return pio_usb_device_endpoint_transfer(pio_rhport, ep_addr, buffer, total_bytes); } // Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) -{ - (void) rhport; - (void) ep_addr; - (void) ff; - (void) total_bytes; - return false; -} +//bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +//{ +// (void) rhport; +// (void) ep_addr; +// (void) ff; +// (void) total_bytes; +// return false; +//} // Stall endpoint void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) @@ -150,7 +149,6 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ -extern void update_ep0_crc5_lut(uint8_t addr); static void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_t* port, uint32_t flag) { @@ -188,14 +186,6 @@ static void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_ { pio_hw_endpoint_t* ep = PIO_USB_HW_EP(ep_idx); uint8_t const tu_rhport = port - PIO_USB_HW_RPORT(0) + 1; - - // address is changed, update crc5 lut - if (new_addr && ep->ep_num == 0x80 && ep->actual_len == 0) - { - update_ep0_crc5_lut(new_addr); - new_addr = 0; - } - dcd_event_xfer_complete(tu_rhport, ep->ep_num, ep->actual_len, result, true); } } @@ -213,7 +203,6 @@ void __no_inline_not_in_flash_func(pio_usb_device_irq_handler)(uint8_t root_id) if (ints & PIO_USB_INTS_RESET_END_BITS) { - new_addr = 0; dcd_event_bus_reset(tu_rhport, TUSB_SPEED_FULL, true); } -- cgit v1.3.1 From 4a661dead0899cb154325a8257d19281f2536af3 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Apr 2022 17:57:52 +0700 Subject: add TU_ATTR_FAST_FUNC for rp2040 __not_in_flash() section --- examples/device/hid_boot_interface/src/main.c | 2 -- hw/bsp/rp2040/family.cmake | 2 +- src/common/tusb_mcu.h | 7 +++++++ src/device/usbd.c | 3 ++- 4 files changed, 10 insertions(+), 4 deletions(-) (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 031b17a2e..e5e2f6856 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -31,8 +31,6 @@ #include "tusb.h" #include "usb_descriptors.h" -#include "pio_usb.h" - //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 70e18293f..bb146d085 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -47,7 +47,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) hardware_irq hardware_resets pico_sync - # for usb-pio + # for usb-pio hardware_dma hardware_pio pico_multicore diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 8eb4ad475..c1cf2a810 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -228,6 +228,8 @@ #elif TU_CHECK_MCU(OPT_MCU_RP2040) #define TUP_DCD_ENDPOINT_MAX 16 + #define TU_ATTR_FAST_FUNC __attribute__((section(".time_critical.tinyusb"))) + //------------- Silabs -------------// #elif TU_CHECK_MCU(OPT_MCU_EFM32GG) #define TUP_USBIP_DWC2 @@ -282,4 +284,9 @@ #define TUP_RHPORT_HIGHSPEED 0x00 #endif +// fast function, normally mean placing function in SRAM +#ifndef TU_ATTR_FAST_FUNC + #define TU_ATTR_FAST_FUNC +#endif + #endif diff --git a/src/device/usbd.c b/src/device/usbd.c index 12b4071af..4c2cd3abd 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -1071,7 +1071,8 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const //--------------------------------------------------------------------+ // DCD Event Handler //--------------------------------------------------------------------+ -void __no_inline_not_in_flash_func(dcd_event_handler)(dcd_event_t const * event, bool in_isr) +TU_ATTR_FAST_FUNC +void dcd_event_handler(dcd_event_t const * event, bool in_isr) { switch (event->event_id) { -- cgit v1.3.1 From ae5490e5a5cd8650a45578b4ac70dbe89b002fb1 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Apr 2022 20:52:56 +0700 Subject: clean up --- examples/device/hid_boot_interface/src/tusb_config.h | 6 ++---- examples/host/cdc_msc_hid/src/tusb_config.h | 7 +++---- src/common/tusb_debug.h | 6 +++--- src/device/usbd.c | 2 +- src/host/usbh.c | 6 +++--- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 1 - src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 1 - 7 files changed, 12 insertions(+), 17 deletions(-) (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index c8bb8a807..8bc85b722 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -40,10 +40,8 @@ #endif // Use raspberry pio-usb for device -#define CFG_TUD_RPI_PIO_USB 1 -#if CFG_TUD_RPI_PIO_USB -#define BOARD_DEVICE_RHPORT_NUM 1 -#endif +// #define CFG_TUD_RPI_PIO_USB 1 +// #define BOARD_DEVICE_RHPORT_NUM 1 // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_DEVICE_RHPORT_NUM diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 9d083c771..e9e68cf5a 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -40,13 +40,12 @@ #endif // Use raspberry pio-usb for host -#define CFG_TUH_RPI_PIO_USB 1 -//#define CFG_TUSB_RPI_PIO_INC_PATH 1 - +// #define CFG_TUH_RPI_PIO_USB 1 +// #define CFG_TUH_RPI_PIO_USB 1 #if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED) -#elif CFG_TUH_RPI_PIO_USB +#elif defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB // rp2040: port0 is native, port 1 for PIO-USB #define CFG_TUSB_RHPORT1_MODE OPT_MODE_HOST #else diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 1ea2c19f5..ac5bee6ec 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -57,7 +57,7 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); #define tu_printf printf #endif -static inline void tu_print_var(uint8_t const* buf, uint32_t bufsize) +static inline void tu_print_arr(uint8_t const* buf, uint32_t bufsize) { for(uint32_t i=0; i Date: Wed, 1 Jun 2022 23:53:40 +0700 Subject: rename board specific macro for example - BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT - BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED --- examples/device/cdc_dual_ports/src/tusb_config.h | 16 ++++----- examples/device/cdc_msc/src/tusb_config.h | 36 +++++++++++++------ examples/device/cdc_msc_freertos/src/tusb_config.h | 18 +++++----- examples/device/dfu/src/tusb_config.h | 16 ++++----- examples/device/dfu_runtime/src/tusb_config.h | 16 ++++----- .../device/dynamic_configuration/src/tusb_config.h | 16 ++++----- .../device/hid_boot_interface/src/tusb_config.h | 18 +++++----- examples/device/hid_composite/src/tusb_config.h | 16 ++++----- .../hid_composite_freertos/src/tusb_config.h | 16 ++++----- .../device/hid_generic_inout/src/tusb_config.h | 16 ++++----- .../hid_multiple_interface/src/tusb_config.h | 16 ++++----- examples/device/midi_test/src/tusb_config.h | 16 ++++----- examples/device/msc_dual_lun/src/tusb_config.h | 16 ++++----- .../device/net_lwip_webserver/src/tusb_config.h | 16 ++++----- examples/device/usbtmc/src/tusb_config.h | 16 ++++----- examples/device/video_capture/src/tusb_config.h | 16 ++++----- examples/device/webusb_serial/src/tusb_config.h | 16 ++++----- .../dual/host_hid_to_device_cdc/src/tusb_config.h | 36 +++++++++---------- hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk | 4 +-- hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk | 4 +-- hw/bsp/imxrt/family.mk | 8 ++--- hw/bsp/lpc54/family.mk | 2 +- hw/bsp/lpc55/family.mk | 4 +-- hw/bsp/stm32f7/family.c | 4 +-- hw/bsp/stm32f7/family.mk | 6 ++-- hw/bsp/stm32h7/family.c | 4 +-- hw/bsp/stm32h7/family.mk | 6 ++-- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 42 +++++++++++----------- src/tusb_option.h | 2 ++ 29 files changed, 217 insertions(+), 201 deletions(-) (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index f93606092..037fc8290 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 6507cef19..3849ad4d0 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -39,31 +39,45 @@ #error CFG_TUSB_MCU must be defined #endif +// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS -#ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE + + +// Device max speed, default is max speed that hardware controller could support without external PHY +// BOARD_TUD_MAX_SPEED can be used to change value (e.g for board features external PHY). +#ifdef BOARD_TUD_MAX_SPEED + #define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED +#else + #define CFG_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif + // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 55e84c62d..d8eeda07d 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -40,26 +40,26 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED +#ifndef BOARD_TUD_MAX_SPEED #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_HIGH_SPEED #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_FULL_SPEED #endif #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/dfu/src/tusb_config.h b/examples/device/dfu/src/tusb_config.h index d4779b2e1..924ede47a 100644 --- a/examples/device/dfu/src/tusb_config.h +++ b/examples/device/dfu/src/tusb_config.h @@ -22,21 +22,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/dfu_runtime/src/tusb_config.h b/examples/device/dfu_runtime/src/tusb_config.h index e15ae7997..f31c9c970 100644 --- a/examples/device/dfu_runtime/src/tusb_config.h +++ b/examples/device/dfu_runtime/src/tusb_config.h @@ -22,21 +22,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h index ddc295dcc..333b62e03 100644 --- a/examples/device/dynamic_configuration/src/tusb_config.h +++ b/examples/device/dynamic_configuration/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index 8bc85b722..e3c50aa3f 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -41,24 +41,24 @@ // Use raspberry pio-usb for device // #define CFG_TUD_RPI_PIO_USB 1 -// #define BOARD_DEVICE_RHPORT_NUM 1 +// #define BOARD_TUD_RHPORT 1 // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index d0f2b513f..1a9223f5b 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 7522bd714..8fd6498e6 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h index 9db50269c..e5ae4b0cc 100644 --- a/examples/device/hid_generic_inout/src/tusb_config.h +++ b/examples/device/hid_generic_inout/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_multiple_interface/src/tusb_config.h b/examples/device/hid_multiple_interface/src/tusb_config.h index 32e8c2843..766b8e518 100644 --- a/examples/device/hid_multiple_interface/src/tusb_config.h +++ b/examples/device/hid_multiple_interface/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h index 967c71403..a7673245e 100644 --- a/examples/device/midi_test/src/tusb_config.h +++ b/examples/device/midi_test/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h index f617f5a4c..2778e61b0 100644 --- a/examples/device/msc_dual_lun/src/tusb_config.h +++ b/examples/device/msc_dual_lun/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h index b1b48598b..5042c0e5d 100644 --- a/examples/device/net_lwip_webserver/src/tusb_config.h +++ b/examples/device/net_lwip_webserver/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h index 5b2215be5..0b2df291a 100644 --- a/examples/device/usbtmc/src/tusb_config.h +++ b/examples/device/usbtmc/src/tusb_config.h @@ -22,21 +22,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 3a079e66b..85bf80a64 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -35,21 +35,21 @@ //-------------------------------------------------------------------- // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index f5e4694e3..eab1d6387 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/dual/host_hid_to_device_cdc/src/tusb_config.h b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h index 0fa4899a9..9a8f31da0 100644 --- a/examples/dual/host_hid_to_device_cdc/src/tusb_config.h +++ b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h @@ -40,13 +40,13 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort number used for device can be defined by board.mk, default to port 1 -#ifndef BOARD_HOST_RHPORT_NUM - #define BOARD_HOST_RHPORT_NUM 1 +#ifndef BOARD_TUH_RHPORT + #define BOARD_TUH_RHPORT 1 #endif // Use raspberry pio-usb for host @@ -54,42 +54,42 @@ // RHPort max operational speed can defined by board.mk // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED +#ifndef BOARD_TUD_MAX_SPEED #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\ TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\ TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_HIGH_SPEED #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_FULL_SPEED #endif #endif // RHPort max operational speed can defined by board.mk // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_HOST_RHPORT_SPEED +#ifndef BOARD_TUH_MAX_SPEED #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\ TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\ TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X) - #define BOARD_HOST_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #define BOARD_TUH_MAX_SPEED OPT_MODE_HIGH_SPEED #else - #define BOARD_HOST_RHPORT_SPEED OPT_MODE_FULL_SPEED + #define BOARD_TUH_MAX_SPEED OPT_MODE_FULL_SPEED #endif #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_HOST_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | BOARD_HOST_RHPORT_SPEED) -#elif BOARD_HOST_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_HOST | BOARD_HOST_RHPORT_SPEED) +#if BOARD_TUH_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | BOARD_TUH_MAX_SPEED) +#elif BOARD_TUH_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_HOST | BOARD_TUH_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk index b14b2a6b9..d21063c99 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk @@ -7,8 +7,8 @@ JLINK_DEVICE = MIMXRT1062xxx6A # For flash-pyocd target PYOCD_TARGET = mimxrt1060 -BOARD_DEVICE_RHPORT_NUM = 1 -BOARD_HOST_RHPORT_NUM = 0 +BOARD_TUD_RHPORT = 1 +BOARD_TUH_RHPORT = 0 # flash using pyocd flash: flash-pyocd diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk index 2b479719f..00b574c52 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk @@ -7,8 +7,8 @@ JLINK_DEVICE = MIMXRT1064xxx6A # For flash-pyocd target PYOCD_TARGET = mimxrt1064 -BOARD_DEVICE_RHPORT_NUM = 1 -BOARD_HOST_RHPORT_NUM = 0 +BOARD_TUD_RHPORT = 1 +BOARD_TUH_RHPORT = 0 # flash using pyocd flash: flash-pyocd diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index 0bf4a0d15..c81e67eb6 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -15,11 +15,11 @@ CFLAGS += \ -DXIP_BOOT_HEADER_ENABLE=1 \ -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX -ifdef BOARD_DEVICE_RHPORT_NUM -CFLAGS += -DBOARD_DEVICE_RHPORT_NUM=$(BOARD_DEVICE_RHPORT_NUM) +ifdef BOARD_TUD_RHPORT +CFLAGS += -DBOARD_TUD_RHPORT=$(BOARD_TUD_RHPORT) endif -ifdef BOARD_HOST_RHPORT_NUM -CFLAGS += -DBOARD_HOST_RHPORT_NUM=$(BOARD_HOST_RHPORT_NUM) +ifdef BOARD_TUH_RHPORT +CFLAGS += -DBOARD_TUH_RHPORT=$(BOARD_TUH_RHPORT) endif # mcu driver cause following warnings diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk index 600df6fd0..39111d1ad 100644 --- a/hw/bsp/lpc54/family.mk +++ b/hw/bsp/lpc54/family.mk @@ -15,7 +15,7 @@ CFLAGS += \ ifeq ($(PORT), 1) $(info "PORT1 High Speed") - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED # LPC55 Highspeed Port1 can only write to USB_SRAM region CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index 4e8d65ce9..1af1d076e 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -16,11 +16,11 @@ CFLAGS += \ -mfpu=fpv5-sp-d16 \ -DCFG_TUSB_MCU=OPT_MCU_LPC55XX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + -DBOARD_TUD_RHPORT=$(PORT) ifeq ($(PORT), 1) $(info "PORT1 High Speed") - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED # LPC55 Highspeed Port1 can only write to USB_SRAM region CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index 14e3b2fd9..425e6e1bc 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -125,7 +125,7 @@ void board_init(void) UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); -#if BOARD_DEVICE_RHPORT_NUM == 0 +#if BOARD_TUD_RHPORT == 0 // OTG_FS /* Configure DM DP Pins */ @@ -258,7 +258,7 @@ void board_init(void) USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; -#endif // BOARD_DEVICE_RHPORT_NUM +#endif // BOARD_TUD_RHPORT } diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk index 8482e6dd2..b8a5d7ead 100644 --- a/hw/bsp/stm32f7/family.mk +++ b/hw/bsp/stm32f7/family.mk @@ -16,14 +16,14 @@ CFLAGS += \ -mfpu=fpv5-d16 \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + -DBOARD_TUD_RHPORT=$(PORT) ifeq ($(PORT), 1) ifeq ($(SPEED), high) - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED $(info "Using OTG_HS in HighSpeed mode") else - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED $(info "Using OTG_HS in FullSpeed mode") endif else diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 84976b4e4..3964f427a 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -122,7 +122,7 @@ void board_init(void) UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); -#if BOARD_DEVICE_RHPORT_NUM == 0 +#if BOARD_TUD_RHPORT == 0 // Despite being call USB2_OTG // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port // PA9 VUSB, PA10 ID, PA11 DM, PA12 DP @@ -166,7 +166,7 @@ void board_init(void) USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense -#elif BOARD_DEVICE_RHPORT_NUM == 1 +#elif BOARD_TUD_RHPORT == 1 // Despite being call USB2_OTG // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index 096d04d0c..a1cd93b27 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -16,14 +16,14 @@ CFLAGS += \ -mfpu=fpv5-d16 \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + -DBOARD_TUD_RHPORT=$(PORT) ifeq ($(PORT), 1) ifeq ($(SPEED), high) - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED $(info "Using OTG_HS in HighSpeed mode") else - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED $(info "Using OTG_HS in FullSpeed mode") endif else diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 3c3cb63b8..7a65cf5d0 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -239,12 +239,12 @@ static void _dcd_ft90x_attach(void) CRITICAL_SECTION_BEGIN // Turn off the device enable bit. -#if BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_HIGH_SPEED +#if BOARD_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED USBD_REG(fctrl) = 0; -#else // BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_FULL_SPEED +#else // BOARD_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED //Set the full speed only bit if required. USBD_REG(fctrl) = MASK_USBD_FCTRL_MODE_FS_ONLY; -#endif // BOARD_DEVICE_RHPORT_SPEED +#endif // BOARD_TUD_MAX_SPEED // Clear first reset and suspend interrupts. do @@ -291,7 +291,7 @@ static void _dcd_ft90x_detach(void) delayms(1); // Disable USB PHY - dcd_disconnect(BOARD_DEVICE_RHPORT_NUM); + dcd_disconnect(BOARD_TUD_RHPORT); delayms(1); // Disable Chip USB device clock/PM configuration. @@ -323,7 +323,7 @@ static void _ft90x_usb_speed(void) delayus(200); } -#if BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_HIGH_SPEED +#if BOARD_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED /* Detect high or full speed */ fctrl_val = MASK_USBD_FCTRL_USB_DEV_EN; @@ -347,11 +347,11 @@ static void _ft90x_usb_speed(void) delayus(125 + 5); _speed = (USBD_REG(cmif) & MASK_USBD_CMIF_SOFIRQ) ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL; - dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true); + dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true); #endif /* !__FT930__ */ -#else // BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_FULL_SPEED +#else // BOARD_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED /* User force set to full speed */ _speed = TUSB_SPEED_FULL; @@ -364,10 +364,10 @@ static void _ft90x_usb_speed(void) } #endif USBD_REG(fctrl) = fctrl_val; - dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true); + dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true); return; -#endif // BOARD_DEVICE_RHPORT_SPEED +#endif // BOARD_TUD_MAX_SPEED } // Send a buffer to the USB IN FIFO. @@ -899,7 +899,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) void _ft90x_usbd_ISR(void) { - tud_int_handler(BOARD_DEVICE_RHPORT_NUM); // Resolves to dcd_int_handler(). + tud_int_handler(BOARD_TUD_RHPORT); // Resolves to dcd_int_handler(). } void dcd_int_handler(uint8_t rhport) @@ -937,19 +937,19 @@ void dcd_int_handler(uint8_t rhport) { // Reset endpoints to default state. _ft90x_reset_edpts(); - dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true); + dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true); } if (cmif & MASK_USBD_CMIF_SUSIRQ) //Handle Suspend interrupt { - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_SUSPEND, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_SUSPEND, true); } if (cmif & MASK_USBD_CMIF_RESIRQ) //Handle Resume interrupt { - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_RESUME, true); } if (cmif & MASK_USBD_CMIF_SOFIRQ) //Handle SOF interrupt { - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_SOF, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_SOF, true); } } // Handle endpoint interrupts. @@ -980,7 +980,7 @@ void dcd_int_handler(uint8_t rhport) _ft90x_dusb_out(USBD_EP_0, (uint8_t *)_ft90x_setup_packet, sizeof(USB_device_request)); // Send the packet to tinyusb. - dcd_event_setup_received(BOARD_DEVICE_RHPORT_NUM, _ft90x_setup_packet, true); + dcd_event_setup_received(BOARD_TUD_RHPORT, _ft90x_setup_packet, true); // Clear the interrupt that signals a SETUP packet is received. USBD_EP_SR_REG(USBD_EP_0) = (MASK_USBD_EP0SR_SETUP); @@ -1002,7 +1002,7 @@ void dcd_int_handler(uint8_t rhport) xfer_bytes = _ft90x_edpt_xfer_out(USBD_EP_0, (uint8_t *)ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes); } // Now signal completion of data packet. - dcd_event_xfer_complete(BOARD_DEVICE_RHPORT_NUM, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true); + dcd_event_xfer_complete(BOARD_TUD_RHPORT, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true); // Allow new transfers on the control endpoint. ep_xfer[USBD_EP_0].valid = 0; @@ -1059,7 +1059,7 @@ void dcd_int_handler(uint8_t rhport) if (ep_xfer[ep_number].remain_size == 0) { // Signal tinyUSB. - dcd_event_xfer_complete(BOARD_DEVICE_RHPORT_NUM, ep_number | ep_dirmask, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true); + dcd_event_xfer_complete(BOARD_TUD_RHPORT, ep_number | ep_dirmask, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true); // Allow new transfers on this endpoint. ep_xfer[ep_number].valid = 0; @@ -1084,21 +1084,21 @@ void ft90x_usbd_pm_ISR(void) { // Signal connection interrupt SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND; - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_RESUME, true); } if (pmcfg & MASK_SYS_PMCFG_DEV_DIS_DEV) { // Signal disconnection interrupt SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND; - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_UNPLUGGED, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_UNPLUGGED, true); } if (pmcfg & MASK_SYS_PMCFG_HOST_RST_DEV) { // Signal Host Reset interrupt SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND; - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_BUS_RESET, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_BUS_RESET, true); } if (pmcfg & MASK_SYS_PMCFG_HOST_RESUME_DEV) @@ -1109,7 +1109,7 @@ void ft90x_usbd_pm_ISR(void) { // If we are driving K-state on Device USB port; // We must maintain the 1ms requirement before resuming the phy - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_RESUME, true); } } } diff --git a/src/tusb_option.h b/src/tusb_option.h index 3b054fc78..ce22a8a6a 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -221,7 +221,9 @@ typedef int make_iso_compilers_happy ; #define TUD_OPT_RHPORT -1 #endif +#ifndef CFG_TUD_ENABLED #define CFG_TUD_ENABLED (TUD_RHPORT_MODE & OPT_MODE_DEVICE) +#endif #if CFG_TUD_ENABLED #define TUD_OPT_HIGH_SPEED ((TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK) ? (TUD_RHPORT_MODE & OPT_MODE_HIGH_SPEED) : (TUP_RHPORT_HIGHSPEED & (1 << TUD_OPT_RHPORT))) -- cgit v1.3.1 From 9794a2b865df81e667b464481bb9b1c70587e64b Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 6 Jun 2022 22:41:04 +0700 Subject: more example update --- .../device/audio_4_channel_mic/src/tusb_config.h | 6 +++ examples/device/audio_test/src/main.c | 3 +- examples/device/audio_test/src/tusb_config.h | 24 +++++++++-- examples/device/cdc_dual_ports/src/main.c | 3 +- examples/device/cdc_dual_ports/src/tusb_config.h | 43 +++++++++---------- examples/device/dfu/src/main.c | 3 +- examples/device/dfu/src/tusb_config.h | 49 +++++++++++----------- examples/device/dfu_runtime/src/main.c | 3 +- examples/device/dfu_runtime/src/tusb_config.h | 43 +++++++++---------- examples/device/dynamic_configuration/src/main.c | 4 +- .../device/dynamic_configuration/src/tusb_config.h | 45 ++++++++++---------- examples/device/hid_boot_interface/src/main.c | 4 +- .../device/hid_boot_interface/src/tusb_config.h | 49 ++++++++++------------ examples/device/hid_composite/src/main.c | 4 +- examples/device/hid_composite/src/tusb_config.h | 43 +++++++++---------- examples/device/hid_composite_freertos/src/main.c | 3 +- .../hid_composite_freertos/src/tusb_config.h | 44 +++++++++---------- examples/device/hid_generic_inout/src/main.c | 3 +- .../device/hid_generic_inout/src/tusb_config.h | 45 ++++++++++---------- examples/device/hid_multiple_interface/src/main.c | 4 +- .../hid_multiple_interface/src/tusb_config.h | 43 +++++++++---------- examples/device/midi_test/src/main.c | 3 +- examples/device/midi_test/src/tusb_config.h | 45 ++++++++++---------- examples/device/msc_dual_lun/src/main.c | 3 +- examples/device/msc_dual_lun/src/tusb_config.h | 45 ++++++++++---------- examples/device/net_lwip_webserver/src/main.c | 4 +- .../device/net_lwip_webserver/src/tusb_config.h | 45 ++++++++++---------- examples/device/uac2_headset/src/main.c | 3 +- examples/device/uac2_headset/src/tusb_config.h | 37 +++++++++++----- examples/device/usbtmc/src/main.c | 3 +- examples/device/usbtmc/src/tusb_config.h | 45 ++++++++++---------- examples/device/video_capture/src/main.c | 4 +- examples/device/video_capture/src/tusb_config.h | 41 ++++++++++-------- examples/device/webusb_serial/src/main.c | 3 +- examples/device/webusb_serial/src/tusb_config.h | 45 ++++++++++---------- 35 files changed, 435 insertions(+), 359 deletions(-) (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 0f5fbfef7..5cf6d07c3 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -90,7 +90,13 @@ extern "C" { #define CFG_TUD_ENDPOINT0_SIZE 64 #endif +//------------- CLASS -------------// #define CFG_TUD_AUDIO 1 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 //-------------------------------------------------------------------- // AUDIO CLASS DRIVER CONFIGURATION diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index ed13ce993..51f55b772 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -82,7 +82,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); // Init values sampFreq = AUDIO_SAMPLE_RATE; diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 9b8514265..355ed1011 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -30,6 +30,20 @@ extern "C" { #endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + //-------------------------------------------------------------------- // COMMON CONFIGURATION //-------------------------------------------------------------------- @@ -39,8 +53,6 @@ extern "C" { #error CFG_TUSB_MCU must be defined #endif -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE - #ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE #endif @@ -49,6 +61,12 @@ extern "C" { #define CFG_TUSB_DEBUG 0 #endif +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 @@ -76,11 +94,11 @@ extern "C" { #endif //------------- CLASS -------------// +#define CFG_TUD_AUDIO 1 #define CFG_TUD_CDC 0 #define CFG_TUD_MSC 0 #define CFG_TUD_HID 0 #define CFG_TUD_MIDI 0 -#define CFG_TUD_AUDIO 1 #define CFG_TUD_VENDOR 0 //-------------------------------------------------------------------- diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 34cd29edd..6053a3b81 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -39,7 +39,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index 037fc8290..070f08ed1 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -30,41 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index 5c8464526..6bb183819 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -74,7 +74,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/dfu/src/tusb_config.h b/examples/device/dfu/src/tusb_config.h index 924ede47a..38064147c 100644 --- a/examples/device/dfu/src/tusb_config.h +++ b/examples/device/dfu/src/tusb_config.h @@ -12,41 +12,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -60,7 +61,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- @@ -72,10 +73,10 @@ #endif //------------- CLASS -------------// -#define CFG_TUD_DFU 1 +#define CFG_TUD_DFU 1 // DFU buffer size, it has to be set to the buffer size used in TUD_DFU_DESCRIPTOR -#define CFG_TUD_DFU_XFER_BUFSIZE ( OPT_MODE_HIGH_SPEED ? 512 : 64 ) +#define CFG_TUD_DFU_XFER_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #ifdef __cplusplus } diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 823c71ae5..55b380353 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -69,7 +69,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/dfu_runtime/src/tusb_config.h b/examples/device/dfu_runtime/src/tusb_config.h index f31c9c970..fa1ae6ed3 100644 --- a/examples/device/dfu_runtime/src/tusb_config.h +++ b/examples/device/dfu_runtime/src/tusb_config.h @@ -12,41 +12,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 4c10f55b0..95f8b8286 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -55,7 +55,9 @@ void midi_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h index 333b62e03..b9b3878cc 100644 --- a/examples/device/dynamic_configuration/src/tusb_config.h +++ b/examples/device/dynamic_configuration/src/tusb_config.h @@ -30,41 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -78,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index e5e2f6856..21cdb383d 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -55,7 +55,9 @@ void hid_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index e3c50aa3f..52723e09f 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -30,45 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif - -// Use raspberry pio-usb for device -// #define CFG_TUD_RPI_PIO_USB 1 -// #define BOARD_TUD_RHPORT 1 +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -82,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index fd25e620a..bc2347ab8 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -56,7 +56,9 @@ void hid_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index 1a9223f5b..6bd32c427 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -30,41 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 317b64611..1030f3d05 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -125,9 +125,10 @@ void usb_device_task(void* param) { (void) param; + // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tusb_init(); + tud_init(BOARD_TUD_RHPORT); // RTOS forever loop while (1) diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 8fd6498e6..935ae9453 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -30,48 +30,48 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif // This examples use FreeRTOS -#define CFG_TUSB_OS OPT_OS_FREERTOS +#define CFG_TUSB_OS OPT_OS_FREERTOS // Espressif IDF requires "freertos/" prefix in include path #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) - #define CFG_TUSB_OS_INC_PATH freertos/ +#define CFG_TUSB_OS_INC_PATH freertos/ #endif - +// can be defined by compiler in DEBUG build #ifndef CFG_TUSB_DEBUG -#define CFG_TUSB_DEBUG 0 +#define CFG_TUSB_DEBUG 0 #endif +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 32185560e..5b7daf118 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -80,7 +80,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h index e5ae4b0cc..98143ac4d 100644 --- a/examples/device/hid_generic_inout/src/tusb_config.h +++ b/examples/device/hid_generic_inout/src/tusb_config.h @@ -30,41 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -78,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index 7cb1d75a7..29ba74398 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -60,7 +60,9 @@ void hid_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/hid_multiple_interface/src/tusb_config.h b/examples/device/hid_multiple_interface/src/tusb_config.h index 766b8e518..49dc962fe 100644 --- a/examples/device/hid_multiple_interface/src/tusb_config.h +++ b/examples/device/hid_multiple_interface/src/tusb_config.h @@ -30,41 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index 193748477..b47d1af76 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -62,7 +62,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h index a7673245e..314dde438 100644 --- a/examples/device/midi_test/src/tusb_config.h +++ b/examples/device/midi_test/src/tusb_config.h @@ -30,41 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -78,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index 0293261ad..96790d20c 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -54,7 +54,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h index 2778e61b0..9cbbbade9 100644 --- a/examples/device/msc_dual_lun/src/tusb_config.h +++ b/examples/device/msc_dual_lun/src/tusb_config.h @@ -30,41 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -78,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 30bb3577b..33b4d38b6 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -228,7 +228,9 @@ int main(void) { /* initialize TinyUSB */ board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); /* initialize lwip, dhcp-server, dns-server, and http */ init_lwip(); diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h index 5042c0e5d..fe72ecdfe 100644 --- a/examples/device/net_lwip_webserver/src/tusb_config.h +++ b/examples/device/net_lwip_webserver/src/tusb_config.h @@ -30,41 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -78,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index bbaacd975..a8d204eaa 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -102,7 +102,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); TU_LOG1("Headset running\r\n"); diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index 2a1189a79..1a3e23e95 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -31,30 +31,45 @@ extern "C" { #endif +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- -#include "usb_descriptors.h" - // defined by compiler flags for flexibility #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE - #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif #ifndef CFG_TUSB_DEBUG -// Can be set during compilation i.e.: make LOG= BOARD= -// Keep in mind that enabling logs when data is streaming can disrupt data flow. -// It can be very helpful though when audio unit requests are tested/debugged. -#define CFG_TUSB_DEBUG 0 +#define CFG_TUSB_DEBUG 0 #endif +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -67,7 +82,7 @@ extern "C" { #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 1fce48f45..6945d8743 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -54,7 +54,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h index 0b2df291a..ab486b108 100644 --- a/examples/device/usbtmc/src/tusb_config.h +++ b/examples/device/usbtmc/src/tusb_config.h @@ -12,41 +12,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -60,7 +61,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index f1d48385f..4028352da 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -55,7 +55,9 @@ void video_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 85bf80a64..e567ba669 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -30,37 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif -// This example doesn't use an RTOS #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -74,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 2716825f8..8eaad7706 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -93,7 +93,8 @@ int main(void) { board_init(); - tusb_init(); + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index eab1d6387..fde732b9e 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -30,41 +30,42 @@ extern "C" { #endif -//-------------------------------------------------------------------- -// COMMON CONFIGURATION -//-------------------------------------------------------------------- - -// defined by board.mk -#ifndef CFG_TUSB_MCU - #error CFG_TUSB_MCU must be defined -#endif +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_TUD_RHPORT - #define BOARD_TUD_RHPORT 0 +#define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED - #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE +#define CFG_TUSB_OS OPT_OS_NONE #endif -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put @@ -78,7 +79,7 @@ #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif //-------------------------------------------------------------------- -- cgit v1.3.1 From b9dc9dbd78ee1890342429502d585f323c480fc2 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 27 Jun 2022 11:50:17 +0700 Subject: fix most warnings with rp2040 -wconversion --- examples/device/audio_4_channel_mic/CMakeLists.txt | 3 +++ examples/device/audio_4_channel_mic/src/main.c | 2 +- .../audio_4_channel_mic/src/usb_descriptors.c | 4 ++-- examples/device/audio_test/CMakeLists.txt | 3 +++ examples/device/audio_test/src/main.c | 2 +- examples/device/audio_test/src/usb_descriptors.c | 4 ++-- examples/device/board_test/CMakeLists.txt | 3 +++ examples/device/cdc_dual_ports/CMakeLists.txt | 3 +++ .../device/cdc_dual_ports/src/usb_descriptors.c | 4 ++-- examples/device/cdc_msc/CMakeLists.txt | 3 +++ .../device/cdc_msc_freertos/src/usb_descriptors.c | 4 ++-- examples/device/dfu/CMakeLists.txt | 5 ++++- examples/device/dfu/src/usb_descriptors.c | 2 +- examples/device/dfu_runtime/CMakeLists.txt | 3 +++ examples/device/dfu_runtime/src/usb_descriptors.c | 4 ++-- .../device/dynamic_configuration/CMakeLists.txt | 3 +++ examples/device/dynamic_configuration/src/main.c | 2 +- .../device/dynamic_configuration/src/msc_disk.c | 6 +++--- .../dynamic_configuration/src/usb_descriptors.c | 4 ++-- examples/device/hid_boot_interface/CMakeLists.txt | 3 +++ .../hid_boot_interface/src/usb_descriptors.c | 4 ++-- examples/device/hid_composite/CMakeLists.txt | 3 +++ .../device/hid_composite/src/usb_descriptors.c | 4 ++-- .../hid_composite_freertos/src/usb_descriptors.c | 4 ++-- examples/device/hid_generic_inout/CMakeLists.txt | 3 +++ .../device/hid_generic_inout/src/usb_descriptors.c | 4 ++-- .../device/hid_multiple_interface/CMakeLists.txt | 3 +++ .../hid_multiple_interface/src/usb_descriptors.c | 4 ++-- examples/device/midi_test/CMakeLists.txt | 3 +++ examples/device/midi_test/src/usb_descriptors.c | 4 ++-- examples/device/msc_dual_lun/CMakeLists.txt | 3 +++ examples/device/msc_dual_lun/src/usb_descriptors.c | 4 ++-- examples/device/net_lwip_webserver/CMakeLists.txt | 3 +++ .../net_lwip_webserver/src/usb_descriptors.c | 4 ++-- examples/device/uac2_headset/CMakeLists.txt | 3 +++ examples/device/uac2_headset/src/usb_descriptors.c | 2 +- examples/device/usbtmc/CMakeLists.txt | 3 +++ examples/device/usbtmc/src/usb_descriptors.c | 2 +- examples/device/video_capture/CMakeLists.txt | 3 +++ .../device/video_capture/src/usb_descriptors.c | 4 ++-- examples/device/webusb_serial/CMakeLists.txt | 3 +++ .../device/webusb_serial/src/usb_descriptors.c | 4 ++-- .../host_hid_to_device_cdc/src/usb_descriptors.c | 2 +- examples/example.cmake | 25 ++++++++++++++++++++++ hw/bsp/rp2040/family.c | 6 +++++- src/class/audio/audio_device.c | 2 +- src/class/hid/hid_device.c | 5 +++-- src/class/midi/midi_device.c | 12 +++++------ 48 files changed, 140 insertions(+), 53 deletions(-) create mode 100644 examples/example.cmake (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index f6e10e2ea..e6ce2813e 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 9c94edd49..a6af5fd19 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -221,7 +221,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * // Request uses format layout 2 TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); - volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 93ae2ea47..8929f3057 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; for(uint8_t i=0; iwLength == sizeof(audio_control_cur_2_t)); - volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index 09b2a2d45..da3e203d7 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; for(uint8_t i=0; i 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -247,7 +247,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index fa6e83b7e..04c7c1b26 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -24,6 +24,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 9585822a3..30a712275 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -247,7 +247,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -258,7 +258,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index abc4d91da..121ab3852 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index 350334aa5..51a0d09f5 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -152,7 +152,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) { chr_count = 31; } diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c index 060943289..1b0a60551 100644 --- a/examples/device/dfu_runtime/src/usb_descriptors.c +++ b/examples/device/dfu_runtime/src/usb_descriptors.c @@ -147,7 +147,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) { chr_count = 31; } @@ -160,7 +160,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u)); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index fa6e83b7e..04c7c1b26 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -24,6 +24,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 95f8b8286..33a603343 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -181,7 +181,7 @@ void midi_task(void) start_ms += 286; // Previous positions in the note sequence. - int previous = note_pos - 1; + int previous = (int) (note_pos - 1); // If we currently are at position 0, set the // previous position to the last note in the sequence. diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index a895f4738..e8cb03fdd 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -184,7 +184,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff uint8_t const* addr = msc_disk[lba] + offset; memcpy(buffer, addr, bufsize); - return bufsize; + return (int32_t) bufsize; } // Callback invoked when received WRITE10 command. @@ -203,7 +203,7 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* (void) lba; (void) offset; (void) buffer; #endif - return bufsize; + return (int32_t) bufsize; } // Callback invoked when received an SCSI command not in built-in list below @@ -237,7 +237,7 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, { if(in_xfer) { - memcpy(buffer, response, resplen); + memcpy(buffer, response, (size_t) resplen); }else { // SCSI output diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index b88f20163..457f774d0 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -226,7 +226,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -237,7 +237,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/hid_boot_interface/CMakeLists.txt +++ b/examples/device/hid_boot_interface/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index 3fa48d98d..a0d7e9f15 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -163,7 +163,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -174,7 +174,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index e760b20ba..2988baee2 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -210,7 +210,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -221,7 +221,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index 791813fdf..4df12d3db 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -208,7 +208,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -219,7 +219,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index 5dabf42a3..c2b4792c8 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -153,7 +153,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -164,7 +164,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_multiple_interface/src/usb_descriptors.c b/examples/device/hid_multiple_interface/src/usb_descriptors.c index 9eef21504..42471a961 100644 --- a/examples/device/hid_multiple_interface/src/usb_descriptors.c +++ b/examples/device/hid_multiple_interface/src/usb_descriptors.c @@ -171,7 +171,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -182,7 +182,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index 8444237c6..c84a873b1 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -166,7 +166,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -177,7 +177,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index 9e834ae21..518eac3ad 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -24,6 +24,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index 2afd391af..68a671c91 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -168,7 +168,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -179,7 +179,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 8e3f0f5a8..5bb091a4f 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -69,6 +69,9 @@ if (EXISTS ${TOP}/lib/lwip/src) ${TOP}/lib/networking/rndis_reports.c ) + # Example common such as compiler warnings + include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 2b4b2a0c3..bee51790a 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -231,7 +231,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > (TU_ARRAY_SIZE(_desc_str) - 1)) chr_count = TU_ARRAY_SIZE(_desc_str) - 1; // Convert ASCII string into UTF-16 @@ -242,7 +242,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index 9e97845b8..a2d6368bf 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -155,7 +155,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if (chr_count > 31) chr_count = 31; for (uint8_t i = 0; i < chr_count; i++) diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index c49603c26..74f81b24f 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -24,6 +24,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/usbtmc/src/usb_descriptors.c b/examples/device/usbtmc/src/usb_descriptors.c index 423482634..770a97436 100644 --- a/examples/device/usbtmc/src/usb_descriptors.c +++ b/examples/device/usbtmc/src/usb_descriptors.c @@ -175,7 +175,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) { chr_count = 31; } diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index cb321f9a8..416b91665 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index da8ec8e89..5c97f4fe1 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -160,7 +160,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 93e802a90..cafe2c22b 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -235,7 +235,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -246,7 +246,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c index e55899f65..6b0a89127 100644 --- a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -259,7 +259,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/example.cmake b/examples/example.cmake new file mode 100644 index 000000000..6bb82a56d --- /dev/null +++ b/examples/example.cmake @@ -0,0 +1,25 @@ +target_compile_options(${PROJECT} PUBLIC + -Wall + -Wextra + -Werror + -Wfatal-errors + -Wdouble-promotion + #-Wstrict-prototypes + -Wstrict-overflow + #-Werror-implicit-function-declaration + -Wfloat-equal + #-Wundef + -Wshadow + -Wwrite-strings + -Wsign-compare + -Wmissing-format-attribute + -Wunreachable-code + -Wcast-align + -Wcast-function-type + -Wcast-qual + -Wnull-dereference + -Wuninitialized + -Wunused + -Wredundant-decls + -Wconversion + ) diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 68c9e2d52..90e2192c0 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -53,7 +53,7 @@ // // This doesn't work if others are trying to access flash at the same time, // e.g. XIP streamer, or the other core. -bool __no_inline_not_in_flash_func(get_bootsel_button)() { +bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { const uint CS_PIN_INDEX = 1; // Must disable interrupts, as interrupt handlers may be in flash, and we @@ -170,6 +170,8 @@ void board_init(void) void board_led_write(bool state) { + (void) state; + #ifdef LED_PIN gpio_put(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); #endif @@ -192,6 +194,7 @@ int board_uart_read(uint8_t* buf, int len) } return len; #else + (void) buf; (void) len; return 0; #endif } @@ -205,6 +208,7 @@ int board_uart_write(void const * buf, int len) } return len; #else + (void) buf; (void) len; return 0; #endif } diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index dbd8ab54b..e13e4a46c 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -1619,7 +1619,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * // Reconfigure size of support FIFOs - this is necessary to avoid samples to get split in case of a wrap #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - const uint16_t active_fifo_depth = (audio->tx_supp_ff_sz_max / audio->n_bytes_per_sampe_tx) * audio->n_bytes_per_sampe_tx; + const uint16_t active_fifo_depth = (uint16_t) ((audio->tx_supp_ff_sz_max / audio->n_bytes_per_sampe_tx) * audio->n_bytes_per_sampe_tx); for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) { tu_fifo_config(&audio->tx_supp_ff[cnt], audio->tx_supp_ff[cnt].buffer, active_fifo_depth, 1, true); diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index cdf155e1c..d15d44838 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -187,7 +187,8 @@ uint16_t hidd_open(uint8_t rhport, tusb_desc_interface_t const * desc_itf, uint1 TU_VERIFY(TUSB_CLASS_HID == desc_itf->bInterfaceClass, 0); // len = interface + hid + n*endpoints - uint16_t const drv_len = sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + desc_itf->bNumEndpoints*sizeof(tusb_desc_endpoint_t); + uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); TU_ASSERT(max_len >= drv_len, 0); // Find available interface @@ -408,7 +409,7 @@ bool hidd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ // Received report else if (ep_addr == p_hid->ep_out) { - tud_hid_set_report_cb(instance, 0, HID_REPORT_TYPE_INVALID, p_hid->epout_buf, xferred_bytes); + tud_hid_set_report_cb(instance, 0, HID_REPORT_TYPE_INVALID, p_hid->epout_buf, (uint16_t) xferred_bytes); TU_ASSERT(usbd_edpt_xfer(rhport, p_hid->ep_out, p_hid->epout_buf, sizeof(p_hid->epout_buf))); } diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index 28e6a92d2..de41706e8 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -127,7 +127,7 @@ uint32_t tud_midi_n_available(uint8_t itf, uint8_t cable_num) midid_stream_t const* stream = &midi->stream_read; // when using with packet API stream total & index are both zero - return tu_fifo_count(&midi->rx_ff) + (stream->total - stream->index); + return tu_fifo_count(&midi->rx_ff) + (uint8_t) (stream->total - stream->index); } uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void* buffer, uint32_t bufsize) @@ -179,7 +179,7 @@ uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void* buffer, ui } // Copy data up to bufsize - uint32_t const count = tu_min32(stream->total - stream->index, bufsize); + uint8_t const count = (uint8_t) tu_min32(stream->total - stream->index, bufsize); // Skip the header (1st byte) in the buffer memcpy(buf8, stream->buffer + 1 + stream->index, count); @@ -276,13 +276,13 @@ uint32_t tud_midi_n_stream_write(uint8_t itf, uint8_t cable_num, uint8_t const* else if ( (msg >= 0x8 && msg <= 0xB) || msg == 0xE ) { // Channel Voice Messages - stream->buffer[0] = (cable_num << 4) | msg; + stream->buffer[0] = (uint8_t) ((cable_num << 4) | msg); stream->total = 4; } else if ( msg == 0xC || msg == 0xD) { // Channel Voice Messages, two-byte variants (Program Change and Channel Pressure) - stream->buffer[0] = (cable_num << 4) | msg; + stream->buffer[0] = (uint8_t) ((cable_num << 4) | msg); stream->total = 3; } else if ( msg == 0xf ) @@ -312,7 +312,7 @@ uint32_t tud_midi_n_stream_write(uint8_t itf, uint8_t cable_num, uint8_t const* else { // Pack individual bytes if we don't support packing them into words. - stream->buffer[0] = cable_num << 4 | 0xf; + stream->buffer[0] = (uint8_t) (cable_num << 4 | 0xf); stream->buffer[2] = 0; stream->buffer[3] = 0; stream->index = 2; @@ -513,7 +513,7 @@ bool midid_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32 // receive new data if ( ep_addr == p_midi->ep_out ) { - tu_fifo_write_n(&p_midi->rx_ff, p_midi->epout_buf, xferred_bytes); + tu_fifo_write_n(&p_midi->rx_ff, p_midi->epout_buf, (uint16_t) xferred_bytes); // invoke receive callback if available if (tud_midi_rx_cb) tud_midi_rx_cb(itf); -- cgit v1.3.1 From 556b5d5044bd02e89d6b6c6f21e95d46f5fcdfc1 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 27 Jun 2022 12:22:36 +0700 Subject: change report len in hid API from uint8_t to uint16_t since HS interrupt endpoint can be up to 1024, 8-bit is not enough. affected APIs are: - tud_hid_n_report() / tud_hid_report() - tud_hid_report_complete_cb() --- examples/device/hid_boot_interface/src/main.c | 2 +- examples/device/hid_composite/src/main.c | 2 +- examples/device/hid_composite_freertos/src/main.c | 2 +- src/class/hid/hid_device.c | 8 ++++---- src/class/hid/hid_device.h | 8 ++++---- 5 files changed, 11 insertions(+), 11 deletions(-) (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 21cdb383d..1958d614d 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -181,7 +181,7 @@ void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) { (void) instance; (void) report; diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index bc2347ab8..3c088b7c2 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -225,7 +225,7 @@ void hid_task(void) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) { (void) instance; (void) len; diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 1030f3d05..ea8d917fe 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -294,7 +294,7 @@ void hid_task(void* param) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) { (void) instance; (void) len; diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index cdf155e1c..210050858 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -81,7 +81,7 @@ bool tud_hid_n_ready(uint8_t instance) return tud_ready() && (ep_in != 0) && !usbd_edpt_busy(rhport, ep_in); } -bool tud_hid_n_report(uint8_t instance, uint8_t report_id, void const* report, uint8_t len) +bool tud_hid_n_report(uint8_t instance, uint8_t report_id, void const* report, uint16_t len) { uint8_t const rhport = 0; hidd_interface_t * p_hid = &_hidd_itf[instance]; @@ -92,7 +92,7 @@ bool tud_hid_n_report(uint8_t instance, uint8_t report_id, void const* report, u // prepare data if (report_id) { - len = tu_min8(len, CFG_TUD_HID_EP_BUFSIZE-1); + len = tu_min16(len, CFG_TUD_HID_EP_BUFSIZE-1); p_hid->epin_buf[0] = report_id; memcpy(p_hid->epin_buf+1, report, len); @@ -100,7 +100,7 @@ bool tud_hid_n_report(uint8_t instance, uint8_t report_id, void const* report, u }else { // If report id = 0, skip ID field - len = tu_min8(len, CFG_TUD_HID_EP_BUFSIZE); + len = tu_min16(len, CFG_TUD_HID_EP_BUFSIZE); memcpy(p_hid->epin_buf, report, len); } @@ -402,7 +402,7 @@ bool hidd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ { if (tud_hid_report_complete_cb) { - tud_hid_report_complete_cb(instance, p_hid->epin_buf, (uint8_t) xferred_bytes); + tud_hid_report_complete_cb(instance, p_hid->epin_buf, (uint16_t) xferred_bytes); } } // Received report diff --git a/src/class/hid/hid_device.h b/src/class/hid/hid_device.h index 078b67349..3714d2769 100644 --- a/src/class/hid/hid_device.h +++ b/src/class/hid/hid_device.h @@ -62,7 +62,7 @@ uint8_t tud_hid_n_interface_protocol(uint8_t instance); uint8_t tud_hid_n_get_protocol(uint8_t instance); // Send report to host -bool tud_hid_n_report(uint8_t instance, uint8_t report_id, void const* report, uint8_t len); +bool tud_hid_n_report(uint8_t instance, uint8_t report_id, void const* report, uint16_t len); // KEYBOARD: convenient helper to send keyboard report if application // use template layout report as defined by hid_keyboard_report_t @@ -82,7 +82,7 @@ bool tud_hid_n_gamepad_report(uint8_t instance, uint8_t report_id, int8_t x, int static inline bool tud_hid_ready(void); static inline uint8_t tud_hid_interface_protocol(void); static inline uint8_t tud_hid_get_protocol(void); -static inline bool tud_hid_report(uint8_t report_id, void const* report, uint8_t len); +static inline bool tud_hid_report(uint8_t report_id, void const* report, uint16_t len); static inline bool tud_hid_keyboard_report(uint8_t report_id, uint8_t modifier, uint8_t keycode[6]); static inline bool tud_hid_mouse_report(uint8_t report_id, uint8_t buttons, int8_t x, int8_t y, int8_t vertical, int8_t horizontal); static inline bool tud_hid_gamepad_report(uint8_t report_id, int8_t x, int8_t y, int8_t z, int8_t rz, int8_t rx, int8_t ry, uint8_t hat, uint32_t buttons); @@ -116,7 +116,7 @@ TU_ATTR_WEAK bool tud_hid_set_idle_cb(uint8_t instance, uint8_t idle_rate); // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t len); +TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len); //--------------------------------------------------------------------+ @@ -137,7 +137,7 @@ static inline uint8_t tud_hid_get_protocol(void) return tud_hid_n_get_protocol(0); } -static inline bool tud_hid_report(uint8_t report_id, void const* report, uint8_t len) +static inline bool tud_hid_report(uint8_t report_id, void const* report, uint16_t len) { return tud_hid_n_report(0, report_id, report, len); } -- cgit v1.3.1 From b495d6f8ec263e51b0683ab85ff9e54dab6f5fd3 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 17 Jul 2022 22:46:16 +0700 Subject: temporarily revert len back to uint8_t in tud_hid_report_complete_cb() for up coming release --- examples/device/hid_boot_interface/src/main.c | 2 +- examples/device/hid_composite/src/main.c | 2 +- examples/device/hid_composite_freertos/src/main.c | 2 +- src/class/hid/hid_device.c | 2 +- src/class/hid/hid_device.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'examples/device/hid_boot_interface/src') diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 1958d614d..71afa3f46 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -181,7 +181,7 @@ void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len) { (void) instance; (void) report; diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 05315f266..f7d76cfc7 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -225,7 +225,7 @@ void hid_task(void) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len) { (void) instance; (void) len; diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ea8d917fe..b67c10937 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -294,7 +294,7 @@ void hid_task(void* param) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len) { (void) instance; (void) len; diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index 2d46d760f..8077e4deb 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -403,7 +403,7 @@ bool hidd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ { if (tud_hid_report_complete_cb) { - tud_hid_report_complete_cb(instance, p_hid->epin_buf, (uint16_t) xferred_bytes); + tud_hid_report_complete_cb(instance, p_hid->epin_buf, (/*uint16_t*/ uint8_t) xferred_bytes); } } // Received report diff --git a/src/class/hid/hid_device.h b/src/class/hid/hid_device.h index 3714d2769..3143b1024 100644 --- a/src/class/hid/hid_device.h +++ b/src/class/hid/hid_device.h @@ -116,7 +116,7 @@ TU_ATTR_WEAK bool tud_hid_set_idle_cb(uint8_t instance, uint8_t idle_rate); // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len); +TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len ); //--------------------------------------------------------------------+ -- cgit v1.3.1