From e02f93158cc602ba6f20945a187172abf2546718 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 13 Jul 2026 17:53:34 +0700 Subject: test/hil: usbtest fleet enablement, shuffled scheduling, unique PIDs Pool/config: - record real uids (ra8m1_ek), enable usbtest for espressif s3/p4, then park ra6m5_ek and ra8m1_ek in boards-skip (ra6m5's usbtest/MSC traffic can kill the uPD720201 host on its ROM firmware; ra8m1 USBHS bring-up pending); max32666/nrf54lm20 stay enabled - their MosChip flakiness never wedges - re-enable device/usbtest on HS boards (mimxrt1064, ch32v307) now that uPD720201 firmware 2.0.2.6 fixes the command-ring death; mimxrt1015 stays skipped - its HS battery killed the controller on both ROM and 2.0.2.6 firmware (board-specific); match the moved host-test bundles (f723 <-> rt1064); skip never-passing tests on the new nrf5340dk/nrf54lm20dk boards and the detached pico host bundle, each documented with a comment Host-controller quirk gating in usbtest.py (auto-skip, self-heals on a healthy xHCI): - MosChip MCS9990 EHCI: case 25 (int-OUT never scheduled, FRINDEX bug) and case 11 (unlinked reads complete short/EREMOTEIO) - Renesas uPD720201 xHCI: firmware-gated. The card must run firmware >= 2.0.2.6 (RAM-uploaded - it reverts to ROM on every power cycle): on older firmware the command ring dies under unlink stress (a Configure Endpoint command stops completing; the hub worker deadlocks holding the device lock; only a host power cycle recovers; three boards reproduced it). usbtest.py reads the FW version register (PCI config 0x6c) and refuses to run at all on older firmware - hil_test surfaces that as a failed test with the reason. On current firmware the full 30-case battery runs (validated FS+HS: metro_m4, f723, f723-DMA all 30/30). Scheduling (hil_test.py): - Shuffle each (board, variant)'s test order with a seeded RNG (HIL_SHUFFLE_SEED to replay) so usbtest batteries and flash churn spread across the timeline instead of convoying on one controller. - Per-controller usbtest + flash semaphores: HIL_USBTEST_PARALLEL (default 4) concurrent usbtest batteries and HIL_FLASH_PARALLEL (default 8) concurrent flashes per host controller. Profiled on uPD720201 firmware 2.0.2.6 across 8/1..12/8: wall time falls 22.2/14.3/12.5/10.8 min at usbtest width 1/2/3/4 and plateaus there; zero controller errors everywhere; first battery case failures (leaf-hub bandwidth stretch) appear at 12/8, and flash width 12 only amplifies flasher-hub contention flakes - so 8/4 is the optimum. A separate battery-window flash throttle was profiled and dropped. - Give every example a unique hardcoded USB PID (0x4001-0x4022, usbtest keeps 0x4010) instead of the PID_MAP interface bitmap: different examples now always re-enumerate back-to-back, even on boards whose CPU reset does not drop D+ (WCH CH58x), so the EXAMPLE_PID table and same-PID adjacency reordering in hil_test.py are gone; only the variant-boundary same-example repeat needs a swap. - Report matrix: stable columns with the metric-bearing tests pinned first (usbtest, cdc_msc_throughput, msc_file_explorer[_freertos]), the rest alphabetical. Fail fast: - enum wait budget 8 s on the first attempt, 4 s on retries; dfu waits are deadline-based so dfu-util's own runtime counts against the budget. A device-absent failure now costs ~3-5x a passing test (20-30 s) instead of 10-30x (47-150 s). - CI runs hil_test with --retry 1 and no in-run second pass: a broken fixture fails the job fast instead of holding the self-hosted runner for hours and blocking other PRs' HIL jobs. hil_test still writes the .skip sidecar, so a manual re-run attempt only retests what failed. Review fixes (multi-agent adversarial review of this commit): - tinyusb_win_usbser.inf: the PID rework moved five CDC examples onto even PIDs the INF's odd-only DeviceList never matched (legacy-Windows usbser binding) - appended 0x4006/4008/400a/4020/4022 to both lists. - usbtest example: USBTEST_TIER is now overridable and the descriptors and pumps are tier-conditional, so a board whose DCD cannot serve a tier lowers it instead of skipping the whole example - RA2A1 (RUSB2 with no isochronous pipe) builds at tier 3 via its BOARD_ define; the host battery follows the tier advertised in bcdDevice. Tier-4 output verified byte-identical after the refactor. - dynamic_configuration's second config derived USB_PID + 11 = 0x4018, colliding with net_lwip_webserver - now USB_PID + 0x0100, outside the per-example space. tools/check_example_pids.py (pre-commit hook) enforces PID uniqueness incl. derived and literal idProduct values. - usbtest.py firmware gate: matched by device ID (uPD720201/720202, both use the 0x6c FW register), and an unreadable version (setpci missing/denied) now refuses with its own message instead of masquerading as "firmware 0x00000000"; noted the gate is necessary but not sufficient (board-specific kills stay per-board skips). - hil_test: deadline waits use time.monotonic(); multiprocessing context pinned to fork (raw semaphores in Pool initargs); flash and usbtest permits unified into one fail-closed, exception-safe ctrl_permit (unknown controller takes every slot and logs a warning instead of silently borrowing slot 0); an all-skipped battery reports as skip, not "0/0" failure; slow-body polls (mtp, printer, disk read) go through a shared deadline-based wait_until so their bodies count against the enum budget; throughput's FS detection compares serials case-insensitively like every other walk; a missing MSC read-speed line now fails the host msc_file_explorer test instead of passing with an empty metric. Hardening: - fail fast (15 s) when a driver-registry sysfs write blocks: a wedged device otherwise turns every subsequent battery into an unkillable D-state writer and silently hangs the whole run - usb-recover skill: a VM reboot is not a reliable cure (MosChip hubs latch up across the PCIe reset); full host power cycle is Co-Authored-By: Claude Fable 5 Claude-Session: https://claude.ai/code/session_01HeF2gZ1M7GWkz6Av4BpKPg --- examples/device/net_lwip_webserver/src/usb_descriptors.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'examples/device/net_lwip_webserver') diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 09090bb92..85a6a420c 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -27,16 +27,8 @@ #include "class/net/net_device.h" #include "tusb.h" -/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. - * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. - * - * Auto ProductID layout's Bitmap: - * [MSB] NET | VENDOR | MIDI | HID | MSC | CDC [LSB] - */ -#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID \ - (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | \ - PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5)) +// Unique PID per example: guarantees re-enumeration on re-flash and a fresh host driver match. +#define USB_PID 0x4018 // String Descriptor Index enum { -- cgit v1.3.1 From 6e0f455634126e7eba315ebc279e563aefbf5815 Mon Sep 17 00:00:00 2001 From: Jie Feng Date: Wed, 10 Jun 2026 18:49:07 +0800 Subject: examples now build --- examples/device/net_lwip_webserver/skip.txt | 1 + hw/bsp/py32f0/FreeRTOSConfig/FreeRTOSConfig.h | 108 +++++++++++++++++++++ .../py32f0/boards/py32f071_dev_board/board.cmake | 1 + hw/bsp/py32f0/boards/py32f071_dev_board/board.mk | 1 + 4 files changed, 111 insertions(+) create mode 100644 hw/bsp/py32f0/FreeRTOSConfig/FreeRTOSConfig.h (limited to 'examples/device/net_lwip_webserver') diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 5e5562087..c3df1ee4b 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -10,6 +10,7 @@ mcu:SAMD11 mcu:STM32L0 mcu:STM32F0 mcu:KINETIS_KL +mcu:PY32F0 mcu:STM32H7RS mcu:STM32N6 family:broadcom_64bit diff --git a/hw/bsp/py32f0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/py32f0/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..6b3ae0cd5 --- /dev/null +++ b/hw/bsp/py32f0/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,108 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2026, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef FREERTOS_CONFIG_H_ +#define FREERTOS_CONFIG_H_ + +#ifndef __IASMARM__ + #include "py32f0xx.h" +#endif + +#define configENABLE_MPU 0 +#define configENABLE_FPU 0 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE 1024 + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ 1000 +#define configMAX_PRIORITIES 5 +#define configMINIMAL_STACK_SIZE 128 +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION * 4 * 1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 2 ) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +#define configPRIO_BITS __NVIC_PRIO_BITS +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ( ( 1 << configPRIO_BITS ) - 1 ) +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << ( 8 - configPRIO_BITS ) ) +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << ( 8 - configPRIO_BITS ) ) + +#endif diff --git a/hw/bsp/py32f0/boards/py32f071_dev_board/board.cmake b/hw/bsp/py32f0/boards/py32f071_dev_board/board.cmake index 6c9c58e3d..194d3e6b7 100644 --- a/hw/bsp/py32f0/boards/py32f071_dev_board/board.cmake +++ b/hw/bsp/py32f0/boards/py32f071_dev_board/board.cmake @@ -4,6 +4,7 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/py32f071xb.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC PY32F071xB + CFG_EXAMPLE_MSC_DUAL_READONLY CFG_EXAMPLE_VIDEO_READONLY ) endfunction() diff --git a/hw/bsp/py32f0/boards/py32f071_dev_board/board.mk b/hw/bsp/py32f0/boards/py32f071_dev_board/board.mk index 61a2c578c..14bf27f97 100644 --- a/hw/bsp/py32f0/boards/py32f071_dev_board/board.mk +++ b/hw/bsp/py32f0/boards/py32f071_dev_board/board.mk @@ -1,5 +1,6 @@ CFLAGS += \ -DPY32F071xB \ + -DCFG_EXAMPLE_MSC_DUAL_READONLY \ -DCFG_EXAMPLE_VIDEO_READONLY LD_FILE = $(BOARD_PATH)/py32f071xb.ld -- cgit v1.3.1 From 7b9761f1919014152d3e9ee1aaf203d7fb0e762b Mon Sep 17 00:00:00 2001 From: Jie Feng Date: Sat, 25 Jul 2026 11:25:05 +0800 Subject: Enable APM32F0 dependency fetching and CI --- .github/workflows/ci_set_matrix.py | 1 + .gitignore | 1 + examples/device/net_lwip_webserver/skip.txt | 1 + hw/bsp/apm32f0xx/FreeRTOSConfig/FreeRTOSConfig.h | 108 +++++++++++++++++++++ .../boards/apm32f072_dev_board/board.cmake | 7 +- .../apm32f0xx/boards/apm32f072_dev_board/board.mk | 5 +- hw/bsp/apm32f0xx/family.c | 9 ++ hw/bsp/apm32f0xx/family.cmake | 2 +- hw/bsp/apm32f0xx/family.mk | 2 +- tools/get_deps.py | 3 + 10 files changed, 135 insertions(+), 4 deletions(-) create mode 100644 hw/bsp/apm32f0xx/FreeRTOSConfig/FreeRTOSConfig.h (limited to 'examples/device/net_lwip_webserver') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index dc0d3871f..50ada5964 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -16,6 +16,7 @@ toolchain_list = [ # family: [supported toolchain] family_list = { + "apm32f0xx": ["arm-gcc"], "at32f402_405": ["arm-gcc"], "at32f403a_407": ["arm-gcc"], "at32f413": ["arm-gcc"], diff --git a/.gitignore b/.gitignore index ca745ee19..8773322e4 100644 --- a/.gitignore +++ b/.gitignore @@ -78,6 +78,7 @@ hw/mcu/artery/ hw/mcu/broadcom/ hw/mcu/bridgetek/ft9xx/ft90x-sdk/ hw/mcu/gd/ +hw/mcu/geehy/ hw/mcu/hpmicro/ hw/mcu/infineon/ hw/mcu/microchip/ diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index c3df1ee4b..53836b581 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -1,3 +1,4 @@ +mcu:APM32F0XX mcu:CH32V103 mcu:CH32V20X mcu:LPC11UXX diff --git a/hw/bsp/apm32f0xx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/apm32f0xx/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..b8d555ebe --- /dev/null +++ b/hw/bsp/apm32f0xx/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,108 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2026, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef FREERTOS_CONFIG_H_ +#define FREERTOS_CONFIG_H_ + +#ifndef __IASMARM__ + #include "apm32f0xx.h" +#endif + +#define configENABLE_MPU 0 +#define configENABLE_FPU 0 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE 1024 + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ 1000 +#define configMAX_PRIORITIES 5 +#define configMINIMAL_STACK_SIZE 128 +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION * 4 * 1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 2 ) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +#define configPRIO_BITS __NVIC_PRIO_BITS +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ( ( 1 << configPRIO_BITS ) - 1 ) +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << ( 8 - configPRIO_BITS ) ) +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << ( 8 - configPRIO_BITS ) ) + +#endif diff --git a/hw/bsp/apm32f0xx/boards/apm32f072_dev_board/board.cmake b/hw/bsp/apm32f0xx/boards/apm32f072_dev_board/board.cmake index 33148dbd4..d25f675be 100644 --- a/hw/bsp/apm32f0xx/boards/apm32f072_dev_board/board.cmake +++ b/hw/bsp/apm32f0xx/boards/apm32f072_dev_board/board.cmake @@ -4,5 +4,10 @@ set(MCU_LINKER_NAME APM32F07xxB) set(JLINK_DEVICE APM32F072RB) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT}) + target_compile_definitions(${TARGET} PUBLIC + ${MCU_VARIANT} + CFG_EXAMPLE_MSC_READONLY + CFG_EXAMPLE_MSC_DUAL_READONLY + CFG_EXAMPLE_VIDEO_READONLY + ) endfunction() diff --git a/hw/bsp/apm32f0xx/boards/apm32f072_dev_board/board.mk b/hw/bsp/apm32f0xx/boards/apm32f072_dev_board/board.mk index 2e5df9947..f78d2091f 100644 --- a/hw/bsp/apm32f0xx/boards/apm32f072_dev_board/board.mk +++ b/hw/bsp/apm32f0xx/boards/apm32f072_dev_board/board.mk @@ -4,4 +4,7 @@ MCU_LINKER_NAME = APM32F07xxB JLINK_DEVICE = APM32F072RB CFLAGS += \ - -D${MCU_VARIANT} + -D${MCU_VARIANT} \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_EXAMPLE_MSC_DUAL_READONLY \ + -DCFG_EXAMPLE_VIDEO_READONLY diff --git a/hw/bsp/apm32f0xx/family.c b/hw/bsp/apm32f0xx/family.c index cbc427f8c..9caa0207c 100644 --- a/hw/bsp/apm32f0xx/family.c +++ b/hw/bsp/apm32f0xx/family.c @@ -36,6 +36,15 @@ #include "bsp/board_api.h" #include "board.h" +void USBD_IRQHandler(void); +#if CFG_TUSB_OS == OPT_OS_NONE +void SysTick_Handler(void); +void SVC_Handler(void); +void PendSV_Handler(void); +#endif +void HardFault_Handler(void); +void _init(void); + //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ diff --git a/hw/bsp/apm32f0xx/family.cmake b/hw/bsp/apm32f0xx/family.cmake index 99a94a7a8..0cf199f26 100644 --- a/hw/bsp/apm32f0xx/family.cmake +++ b/hw/bsp/apm32f0xx/family.cmake @@ -1,7 +1,7 @@ include_guard() set(APM32_FAMILY apm32f0xx) -set(APM32_SDK ${TOP}/hw/mcu/geehy/APM32F0xx_SDK_V1.8.6/Libraries) +set(APM32_SDK ${TOP}/hw/mcu/geehy/APM32F0xx_SDK/Libraries) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) diff --git a/hw/bsp/apm32f0xx/family.mk b/hw/bsp/apm32f0xx/family.mk index 73a762d69..735c83f90 100644 --- a/hw/bsp/apm32f0xx/family.mk +++ b/hw/bsp/apm32f0xx/family.mk @@ -1,5 +1,5 @@ APM32_FAMILY = apm32f0xx -APM32_SDK = hw/mcu/geehy/APM32F0xx_SDK_V1.8.6/Libraries +APM32_SDK = hw/mcu/geehy/APM32F0xx_SDK/Libraries include $(TOP)/$(BOARD_PATH)/board.mk diff --git a/tools/get_deps.py b/tools/get_deps.py index e26810cac..baaf3761f 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -46,6 +46,9 @@ deps_optional = { 'hw/mcu/gd/nuclei-sdk': ['https://github.com/Nuclei-Software/nuclei-sdk.git', '7eb7bfa9ea4fbeacfafe1d5f77d5a0e6ed3922e7', 'gd32vf103'], + 'hw/mcu/geehy/APM32F0xx_SDK': ['https://github.com/GeehySemi/APM32F0xx_SDK.git', + 'cfc1fe826e1869133de86d4c6b298fc153e6bc32', + 'apm32f0xx'], 'hw/mcu/infineon/mtb-xmclib-cat3': ['https://github.com/Infineon/mtb-xmclib-cat3.git', 'daf5500d03cba23e68c2f241c30af79cd9d63880', 'xmc4000'], -- cgit v1.3.1